I simply ran composer update and it resolved my issue - Laravel 6.*

In my case, the problem I had was due to a dependency I was trying to import (BottomNavigationViewEx).

This dependency requires to be downloaded from jitpack.io and maven.google.com, and I was putting this config in buildscript section:

buildscript {
    repositories {
        google()
        jcenter()
        maven { url "https://jitpack.io" } // this is incorrect
        maven { url "https://maven.google.com" } // this is incorrect
    }
    dependencies {
        classpath 'com.android.tools.build:gradle:3.1.2'
    } 
}

which it was incorrect, I need to remove these two maven lines and include them in the right section, 'allprojects':

allprojects {
    repositories {
        google()
        jcenter()
        maven { url "https://jitpack.io" }
        maven { url "https://maven.google.com" }
    }
}

Hope it helps somebody as same for me.

This caused because of Illuminate\Session\TokenMismatchException look at this code sample how to handle it properly:

https://gist.github.com/jrmadsen67/bd0f9ad0ef1ed6bb594e

Using directive it becomes easy and can be used throughout the application

HTML

<input type="text" placeholder="Enter value" numbersOnly>

As .keyCode() and .which() are deprecated, codes are checked using .key() Referred from

Directive:

@Directive({
   selector: "[numbersOnly]"
})

export class NumbersOnlyDirective {
  @Input() numbersOnly:boolean;

  navigationKeys: Array<string> = ['Backspace']; //Add keys as per requirement
  
  constructor(private _el: ElementRef) { }

  @HostListener('keydown', ['$event']) onKeyDown(e: KeyboardEvent) {
    
    if (
      // Allow: Delete, Backspace, Tab, Escape, Enter, etc
      this.navigationKeys.indexOf(e.key) > -1 || 
      (e.key === 'a' && e.ctrlKey === true) || // Allow: Ctrl+A
      (e.key === 'c' && e.ctrlKey === true) || // Allow: Ctrl+C
      (e.key === 'v' && e.ctrlKey === true) || // Allow: Ctrl+V
      (e.key === 'x' && e.ctrlKey === true) || // Allow: Ctrl+X
      (e.key === 'a' && e.metaKey === true) || // Cmd+A (Mac)
      (e.key === 'c' && e.metaKey === true) || // Cmd+C (Mac)
      (e.key === 'v' && e.metaKey === true) || // Cmd+V (Mac)
      (e.key === 'x' && e.metaKey === true) // Cmd+X (Mac)
    ) {
        return;  // let it happen, don't do anything
    }
    // Ensure that it is a number and stop the keypress
    if (e.key === ' ' || isNaN(Number(e.key))) {
      e.preventDefault();
    }
  }
}

I also had this error, and you helped me solve it. If formGroup or formGroupName are not written with the good case, then the name of the control is not found. Correct the case of formGroup or formGroupName and it is OK.

Somehow python 3 came back (after some updates?) and is causing big issues with apt updates, so I've decided to remove python 3 completely from the alternatives:

root:~# python -V
Python 3.5.2

root:~# update-alternatives --config python
There are 2 choices for the alternative python (providing /usr/bin/python).

  Selection    Path                Priority   Status
------------------------------------------------------------
* 0            /usr/bin/python3.5   3         auto mode
  1            /usr/bin/python2.7   2         manual mode
  2            /usr/bin/python3.5   3         manual mode


root:~# update-alternatives --remove python /usr/bin/python3.5

root:~# update-alternatives --config python
There is 1 choice for the alternative python (providing /usr/bin/python).

    Selection    Path                Priority   Status
------------------------------------------------------------
  0            /usr/bin/python2.7   2         auto mode
* 1            /usr/bin/python2.7   2         manual mode

Press <enter> to keep the current choice[*], or type selection number: 0


root:~# python -V
Python 2.7.12

root:~# update-alternatives --config python
There is only one alternative in link group python (providing /usr/bin/python): /usr/bin/python2.7
Nothing to configure.

At first courtesy goes to @Charuka .

DO

You can use android:progressDrawable="@drawable/seekbar" instead of android:background="@drawable/seekbar" .

progressDrawable used for the progress mode.

You should try with

android:minHeight

Defines the minimum height of the view. It is not guaranteed the view will be able to achieve this minimum height (for example, if its parent layout constrains it with less available height).

android:minWidth

Defines the minimum width of the view. It is not guaranteed the view will be able to achieve this minimum width (for example, if its parent layout constrains it with less available width)

    android:minHeight="25p"
    android:maxHeight="25dp" 

FYI:

Using android:minHeight and android:maxHeight is not good solutions .Need to rectify your Custom Seekbar (From Class Level) .

If you have your problem in production, you must have V2__create_shipwreck.sql identically to the one you have in your latest version where it has not been modified.

Then the checksum will be correct again

For anyone experiencing this in angular 9+

This issue can also be experienced if you do not declare or import the component that declares your component.

Lets consider a situation where you intend to use ng-select but you forget to import it Angular will throw the error 'No value accessor...'

I have reproduced this error in the Below stackblitz demo.

Goto View -> Show Symbol -> Show All Characters. Uncheck it. There you go.!!

You can use conda remove --force.

The documentation says:

--force               Forces removal of a package without removing packages
                      that depend on it. Using this option will usually
                      leave your environment in a broken and inconsistent
                      state

I suggest you to retrieve the value stored into the Database as BigDecimal type:

BigDecimal number = new BigDecimal("2.3423424666767E13");

int myInt = number.intValue();
double myDouble = number.doubleValue();

// your purpose
float myFloat = number.floatValue();

BigDecimal provide you a lot of functionalities.

I found way for Print Log in Retrofit

OkHttpClient okHttpClient = new OkHttpClient.Builder()
            .addInterceptor(new Interceptor() {
                @Override
                public Response intercept(Chain chain) throws IOException {
                    Request request = chain.request();
                    if (BuildConfig.DEBUG) {
                        Log.e(getClass().getName(), request.method() + " " + request.url());
                        Log.e(getClass().getName(), "" + request.header("Cookie"));
                        RequestBody rb = request.body();
                        Buffer buffer = new Buffer();
                        if (rb != null)
                            rb.writeTo(buffer);
                        LogUtils.LOGE(getClass().getName(), "Payload- " + buffer.readUtf8());
                    }
                    return chain.proceed(request);
                }
            })
            .readTimeout(60, TimeUnit.SECONDS)
            .connectTimeout(60, TimeUnit.SECONDS)
            .build();

            iServices = new Retrofit.Builder()
                    .baseUrl("Your Base URL")
                    .client(okHttpClient)
                    .addConverterFactory(GsonConverterFactory.create())
                    .build()
                    .create(Your Service Interface .class);

Works for me.

Mac IOS

Edit ~/.bash_profile by using vi or other shell editor

vi ~/.bash_profile

Add the following lines:

export ANDROID_HOME=~/Library/Android/sdk
export PATH=${PATH}:~/Software/android-sdk-macosx/tools:~/Software/android-sdk-macosx/platform-tools"

(save the file, and exit) load those updated env variables to the current shell env:

. ~/.bash_profile

• If from some reason you have an old version of the build tools, you can update them from the android development studio:
• Configure --> SDK Manager --> select "Android SDK Build-Tools
• Check the "Show Package details"
• review the versions of this package, update if needed

tk.mainloop() blocks. It means that execution of your Python commands halts there. You can see that by writing:

while 1:
    ball.draw()
    tk.mainloop()
    print("hello")   #NEW CODE
    time.sleep(0.01)

You will never see the output from the print statement. Because there is no loop, the ball doesn't move.

On the other hand, the methods update_idletasks() and update() here:

while True:
    ball.draw()
    tk.update_idletasks()
    tk.update()

...do not block; after those methods finish, execution will continue, so the while loop will execute over and over, which makes the ball move.

An infinite loop containing the method calls update_idletasks() and update() can act as a substitute for calling tk.mainloop(). Note that the whole while loop can be said to block just like tk.mainloop() because nothing after the while loop will execute.

However, tk.mainloop() is not a substitute for just the lines:

tk.update_idletasks()
tk.update()

Rather, tk.mainloop() is a substitute for the whole while loop:

while True:
    tk.update_idletasks()
    tk.update()

Response to comment:

Here is what the tcl docs say:

Update idletasks

This subcommand of update flushes all currently-scheduled idle events from Tcl's event queue. Idle events are used to postpone processing until “there is nothing else to do”, with the typical use case for them being Tk's redrawing and geometry recalculations. By postponing these until Tk is idle, expensive redraw operations are not done until everything from a cluster of events (e.g., button release, change of current window, etc.) are processed at the script level. This makes Tk seem much faster, but if you're in the middle of doing some long running processing, it can also mean that no idle events are processed for a long time. By calling update idletasks, redraws due to internal changes of state are processed immediately. (Redraws due to system events, e.g., being deiconified by the user, need a full update to be processed.)

APN As described in Update considered harmful, use of update to handle redraws not handled by update idletasks has many issues. Joe English in a comp.lang.tcl posting describes an alternative:

So update_idletasks() causes some subset of events to be processed that update() causes to be processed.

From the update docs:

update ?idletasks?

The update command is used to bring the application “up to date” by entering the Tcl event loop repeatedly until all pending events (including idle callbacks) have been processed.

If the idletasks keyword is specified as an argument to the command, then no new events or errors are processed; only idle callbacks are invoked. This causes operations that are normally deferred, such as display updates and window layout calculations, to be performed immediately.

KBK (12 February 2000) -- My personal opinion is that the [update] command is not one of the best practices, and a programmer is well advised to avoid it. I have seldom if ever seen a use of [update] that could not be more effectively programmed by another means, generally appropriate use of event callbacks. By the way, this caution applies to all the Tcl commands (vwait and tkwait are the other common culprits) that enter the event loop recursively, with the exception of using a single [vwait] at global level to launch the event loop inside a shell that doesn't launch it automatically.

The commonest purposes for which I've seen [update] recommended are:

1. Keeping the GUI alive while some long-running calculation is executing. See Countdown program for an alternative. 2) Waiting for a window to be configured before doing things like geometry management on it. The alternative is to bind on events such as that notify the process of a window's geometry. See Centering a window for an alternative.

What's wrong with update? There are several answers. First, it tends to complicate the code of the surrounding GUI. If you work the exercises in the Countdown program, you'll get a feel for how much easier it can be when each event is processed on its own callback. Second, it's a source of insidious bugs. The general problem is that executing [update] has nearly unconstrained side effects; on return from [update], a script can easily discover that the rug has been pulled out from under it. There's further discussion of this phenomenon over at Update considered harmful.

.....

Is there any chance I can make my program work without the while loop?

Yes, but things get a little tricky. You might think something like the following would work:

class Ball:
    def __init__(self, canvas, color):
        self.canvas = canvas
        self.id = canvas.create_oval(10, 10, 25, 25, fill=color)
        self.canvas.move(self.id, 245, 100)

    def draw(self):
        while True:
           self.canvas.move(self.id, 0, -1)

ball = Ball(canvas, "red")
ball.draw()
tk.mainloop()

The problem is that ball.draw() will cause execution to enter an infinite loop in the draw() method, so tk.mainloop() will never execute, and your widgets will never display. In gui programming, infinite loops have to be avoided at all costs in order to keep the widgets responsive to user input, e.g. mouse clicks.

So, the question is: how do you execute something over and over again without actually creating an infinite loop? Tkinter has an answer for that problem: a widget's after() method:

from Tkinter import *
import random
import time

tk = Tk()
tk.title = "Game"
tk.resizable(0,0)
tk.wm_attributes("-topmost", 1)

canvas = Canvas(tk, width=500, height=400, bd=0, highlightthickness=0)
canvas.pack()

class Ball:
    def __init__(self, canvas, color):
        self.canvas = canvas
        self.id = canvas.create_oval(10, 10, 25, 25, fill=color)
        self.canvas.move(self.id, 245, 100)

    def draw(self):
        self.canvas.move(self.id, 0, -1)
        self.canvas.after(1, self.draw)  #(time_delay, method_to_execute)


       

ball = Ball(canvas, "red")
ball.draw()  #Changed per Bryan Oakley's comment
tk.mainloop()

The after() method doesn't block (it actually creates another thread of execution), so execution continues on in your python program after after() is called, which means tk.mainloop() executes next, so your widgets get configured and displayed. The after() method also allows your widgets to remain responsive to other user input. Try running the following program, and then click your mouse on different spots on the canvas:

from Tkinter import *
import random
import time

root = Tk()
root.title = "Game"
root.resizable(0,0)
root.wm_attributes("-topmost", 1)

canvas = Canvas(root, width=500, height=400, bd=0, highlightthickness=0)
canvas.pack()

class Ball:
    def __init__(self, canvas, color):
        self.canvas = canvas
        self.id = canvas.create_oval(10, 10, 25, 25, fill=color)
        self.canvas.move(self.id, 245, 100)

        self.canvas.bind("<Button-1>", self.canvas_onclick)
        self.text_id = self.canvas.create_text(300, 200, anchor='se')
        self.canvas.itemconfig(self.text_id, text='hello')

    def canvas_onclick(self, event):
        self.canvas.itemconfig(
            self.text_id, 
            text="You clicked at ({}, {})".format(event.x, event.y)
        )

    def draw(self):
        self.canvas.move(self.id, 0, -1)
        self.canvas.after(50, self.draw)


       

ball = Ball(canvas, "red")
ball.draw()  #Changed per Bryan Oakley's comment.
root.mainloop()

By definition "A Set is a collection of values, where each value may occur only once." So, if your array has repeated values then only one value among the repeated values will be added to your Set.

var arr = [1, 2, 3];
var set = new Set(arr);
console.log(set); // {1,2,3}


var arr = [1, 2, 1];
var set = new Set(arr);
console.log(set); // {1,2}

So, do not convert to set if you have repeated values in your array.

In MongoDB, the db.collection.remove() method removes documents from a collection. You can remove all documents from a collection, remove all documents that match a condition, or limit the operation to remove just a single document.

Source: Mongodb.

If you are using mongo sheel, just do:

db.Datetime.remove({})

In your case, you need:

You didn't show me the delete button, so this button is just an example:

<a class="button__delete"></a>

Change the controller to:

exports.destroy = function(req, res, next) {
    Datetime.remove({}, function(err) {
            if (err) {
                console.log(err)
            } else {
                res.end('success');
            }
        }
    );
};

Insert this ajax delete method in your client js file:

        $(document).ready(function(){
            $('.button__delete').click(function() {
                var dataId = $(this).attr('data-id');

                if (confirm("are u sure?")) {
                    $.ajax({
                        type: 'DELETE',
                        url: '/',
                        success: function(response) {
                            if (response == 'error') {
                                console.log('Err!');
                            }
                            else {
                                alert('Success');
                                location.reload();
                            }
                        }
                    });
                } else {
                    alert('Canceled!');
                }
            });
        });

Try this:

<form class="form-horizontal" role="form" method="post" name="registration" novalidate>
    <div class="form-group" ng-class="{'has-error': registration.phone.$error.number}">
        <label for="inputPhone" class="col-sm-3 control-label">Phone :</label>
        <div class="col-sm-9">
            <input type="number" 
                   class="form-control" 
                   ng-minlength="10" 
                   ng-maxlength="10"  
                   id="inputPhone" 
                   name="phone" 
                   placeholder="Phone" 
                   ng-model="user.phone"
                   ng-required="true">
            <span class="help-block" 
                  ng-show="registration.phone.$error.required || 
                           registration.phone.$error.number">
                           Valid phone number is required
            </span>
            <span class="help-block" 
                  ng-show="((registration.phone.$error.minlength ||
                           registration.phone.$error.maxlength) && 
                           registration.phone.$dirty) ">
                           phone number should be 10 digits
            </span>

There are three key XML attributes for custom FABs:

• app:fabSize: Either "mini" (40dp), "normal"(56dp)(default) or "auto"
• app:fabCustomSize: This will decide the overall FAB size.
• app:maxImageSize: This will decide the icon size.

Example:

app:fabCustomSize="64dp" 
app:maxImageSize="32dp"

The FAB padding (the space between the icon and the background circle, aka ripple) is calculated implicitly by:

4-edge padding = (fabCustomSize - maxImageSize) / 2.0 = 16

Note that the margins of the fab can be set by the usual android:margin xml tag properties.

The Get-ADGroupMember cmdlet would solve this in a much more efficient way than you're tying.

As an example:

$users = Get-ADGroupMember -Identity 'Group Name'
$users.count
132

EDIT:

In order to clarify things, and to make your script simpler. Here's a generic script that will work for your environment that outputs the user count for each group matching your filters.

$groups = Get-ADGroup -filter {(name -like "WA*") -or (name -like "workstation*")}
foreach($group in $groups){
  $countUser = (Get-ADGroupMember $group.DistinguishedName).count
  Write-Host "The group $($group.Name) has $countUser user(s)."
}

@Justin Pollard xml code works really good. As a side note you can add a ripple effect with the following xml lines.

    <item>
    <ripple
        xmlns:android="http://schemas.android.com/apk/res/android"
        android:color="?android:colorControlHighlight" >
        <item android:id="@android:id/mask">
            <shape android:shape="oval" >
                <solid android:color="#FFBB00" />
            </shape>
        </item>
        <item>
            <shape android:shape="oval" >
                <solid android:color="@color/ColorPrimary" />
            </shape>
        </item>
    </ripple>
</item>

Recent versions of Cordova have the version number in www/cordova.js.

The Problem

RecyclerView is, by default, unaware of your dataset changes. This means that whenever you make a deletion/addition on your data list, those changes won't be reflected to your RecyclerView directly. (i.e. you remove the item at index 5, but the 6th element remains in your recycler view).

A "ok" Solution

RecyclerView exposes some methods for you to communicate your dataset changes, reflecting those changes directly on your list items. The standard Android APIs allow you to bind the process of data removal (for the purpose of the question) with the process of View removal.

The methods we talked about are:

notifyItemChanged(index: Int)
notifyItemInserted(index: Int)
notifyItemRemoved(index: Int)
notifyItemRangeChanged(startPosition: Int, itemCount: Int)
notifyItemRangeInserted(startPosition: Int, itemCount: Int)
notifyItemRangeRemoved(startPosition: Int, itemCount: Int)

Better Solution

If you don't properly specify what happens on each addition, change or removal of items, RecyclerView children are animated unresponsively because of a lack of information about how to move the different views around the list.

Instead, the following code will precisely play the animation, just on the child that is being removed (And as a side note, it fixed any IndexOutOfBoundExceptions, marked by the stacktrace as "data inconsistency").

void remove(position: Int) {
    dataset.removeAt(position)
    notifyItemChanged(position)
    notifyItemRangeRemoved(position, 1)
}

Under the hood, if we look into RecyclerView we can find documentation explaining that the second parameter we pass to notifyItemRangeRemoved is the number of items that are removed from the dataset, not the total number of items (As wrongly reported in some others information sources).

    /**
     * Notify any registered observers that the <code>itemCount</code> items previously
     * located at <code>positionStart</code> have been removed from the data set. The items
     * previously located at and after <code>positionStart + itemCount</code> may now be found
     * at <code>oldPosition - itemCount</code>.
     *
     * <p>This is a structural change event. Representations of other existing items in the data
     * set are still considered up to date and will not be rebound, though their positions
     * may be altered.</p>
     *
     * @param positionStart Previous position of the first item that was removed
     * @param itemCount Number of items removed from the data set
     */
    public final void notifyItemRangeRemoved(int positionStart, int itemCount) {
        mObservable.notifyItemRangeRemoved(positionStart, itemCount);
    }

Even Better Solution (Opinionated)

Do not use any of those functions. That's my personal view. They are counterintuitive, error-prone and they feel really verbose and unnecessary. Let a library like FastAdapter, Epoxy or Groupie take care of this business, or use an observable recycler view with data binding.

You don't necessarily need to have the parameters inside the URL.

For instance, with:

$stateProvider
.state('home', {
  url: '/',
  views: {
    '': {
      templateUrl: 'home.html',
      controller: 'MainRootCtrl'

    },
  },
  params: {
    foo: null,
    bar: null
  }
})

You will be able to send parameters to the state, using either:

$state.go('home', {foo: true, bar: 1});
// or
<a ui-sref="home({foo: true, bar: 1})">Go!</a>

Of course, if you reload the page once on the home state, you will loose the state parameters, as they are not stored anywhere.

A full description of this behavior is documented here, under the params row in the state(name, stateConfig) section.

If you have converted your form from plain HTML to twig, be sure you didn't miss deleting a closing </form> tag. Silly mistake, but as I discovered it's a possible cause for this problem.

When I got this error, I couldn't figure it out at first. I'm using form_start() and form_end() to generate the form, so I shouldn't have to explicitly add the token with form_row(form._token), or use form_rest() to get it. It should have already been added automatically by form_end().

The problem was, the view I was working with was one that I had converted from plain HTML to twig, and I had missed deleting the closing </form> tag, so instead of :

{{ form_end(form) }}

I had:

</form>
{{ form_end(form) }}

That actually seems like something that might throw an error, but apparently it doesn't, so when form_end() outputs form_rest(), the form is already closed. The actual generated page source of the form was like this:

<form>
    <!-- all my form fields... -->
</form>
<input type="hidden" id="item__token" name="item[_token]" value="SQAOs1xIAL8REI0evGMjOsatLbo6uDzqBjVFfyD0PE4" />
</form>

Obviously the solution is to delete the extra closing tag and maybe drink some more coffee.

If you're trying to take advantage of polymorphic behavior, you need to ensure that the methods visible to outside classes (that need polymorphism) have the same signature. That means they need to have the same name, number and order of parameters, as well as the parameter types.

In your case, you might do better to have a generic draw() method, and rely on the subclasses (Rectangle, Ellipse) to implement the draw() method as what you had been thinking of as "drawEllipse" and "drawRectangle".

Building on the answer from @fzzle - to achieve a circle from a rectangle without defining a fixed height or width, the following will work. The padding-top:100% keeps a 1:1 ratio for the circle-cropper div. Set an inline background image, center it, and use background-size:cover to hide any excess.

CSS

.circle-cropper {
  background-repeat: no-repeat;
  background-size: cover;
  background-position: 50%;
  border-radius: 50%;
  width: 100%;
  padding-top: 100%;
}

HTML

<div class="circle-cropper" role="img" style="background-image:url(myrectangle.jpg);"></div>

app.factory('persistObject', function () {

        var persistObject = [];

        function set(objectName, data) {
            persistObject[objectName] = data;
        }
        function get(objectName) {
            return persistObject[objectName];
        }

        return {
            set: set,
            get: get
        }
    });

Fill it with data like this

persistObject.set('objectName', data); 

Get the object data like this

persistObject.get('objectName'); 

(SELECT C.I_WORKDATE
         FROM T_COMPENSATION C
         WHERE C.I_COMPENSATEDDATE = A.I_REQDATE AND ROWNUM <= 1
         AND C.I_EMPID = A.I_EMPID)

For correct form data usage you need to do 2 steps.

Preparations

You can give your whole form to FormData() for processing

var form = $('form')[0]; // You need to use standard javascript object here
var formData = new FormData(form);

or specify exact data for FormData()

var formData = new FormData();
formData.append('section', 'general');
formData.append('action', 'previewImg');
// Attach file
formData.append('image', $('input[type=file]')[0].files[0]); 

Sending form

Ajax request with jquery will looks like this:

$.ajax({
    url: 'Your url here',
    data: formData,
    type: 'POST',
    contentType: false, // NEEDED, DON'T OMIT THIS (requires jQuery 1.6+)
    processData: false, // NEEDED, DON'T OMIT THIS
    // ... Other options like success and etc
});

After this it will send ajax request like you submit regular form with enctype="multipart/form-data"

Update: This request cannot work without type:"POST" in options since all files must be sent via POST request.

Note: contentType: false only available from jQuery 1.6 onwards

Sometimes this could happen during service deletion via PowerShell remote session script, especially when you are trying to delete service several times. In this case, try to recreate a session before the deletion:

Remove-PSSession -Session $session
$newSession = New-PSSession -ComputerName $Name  -Credential $creds -ErrorAction Stop
Enter-PSSession $newSession

Try this

in view:

<form name="formName" ng-submit="submitForm(formName)">
 <!-- fields -->
</form>

in controller:

$scope.submitForm = function(form){
  if(form.$valid) {
   // Code here if valid
  }
};

or

in view:

<form name="formName" ng-submit="submitForm(formName.$valid)">
  <!-- fields -->
</form>

in controller:

$scope.submitForm = function(formValid){
  if(formValid) {
    // Code here if valid
  }
};

How does it work if you only are using visible-md at Col4 instead? Do you use the -lg at all? If not this might work.

<div class="container">
    <div class="row">
        <div class="col-xs-4 col-sm-2 col-md-1" align="center">
            Col1
        </div>
        <div class="col-xs-4 col-sm-2" align="center">
            Col2
        </div>
        <div class="hidden-xs col-sm-6 col-md-5" align="center">
            Col3
        </div>
        <div class="visible-md col-md-3 " align="center">
            Col4
        </div>
        <div class="col-xs-4 col-sm-2 col-md-1" align="center">
            Col5
        </div>
    </div>
</div>

If you have multiple projects in your git repo, .idea/workspace.xml will not match to any files.

Instead, do the following:

$ git rm -f **/.idea/workspace.xml

And make your .gitignore look something like this:

# User-specific stuff:
**/.idea/workspace.xml
**/.idea/tasks.xml
**/.idea/dictionaries
**/.idea/vcs.xml
**/.idea/jsLibraryMappings.xml

# Sensitive or high-churn files:
**/.idea/dataSources.ids
**/.idea/dataSources.xml
**/.idea/dataSources.local.xml
**/.idea/sqlDataSources.xml
**/.idea/dynamic.xml
**/.idea/uiDesigner.xml

## File-based project format:
*.iws

# IntelliJ
/out/

if you using jpa repository, set properties.put("hibernate.enable_lazy_load_no_trans",true); to jpaPropertymap

So we are all doing the same home work?

Strange how the most up-voted answer is wrong. Remember, draw/fillOval take height and width as parameters, not the radius. So to correctly draw and center a circle with user-provided x, y, and radius values you would do something like this:

public static void drawCircle(Graphics g, int x, int y, int radius) {

  int diameter = radius * 2;

  //shift x and y by the radius of the circle in order to correctly center it
  g.fillOval(x - radius, y - radius, diameter, diameter); 

}

There is an in-built stopword list in NLTK made up of 2,400 stopwords for 11 languages (Porter et al), see http://nltk.org/book/ch02.html

>>> from nltk import word_tokenize
>>> from nltk.corpus import stopwords
>>> stop = set(stopwords.words('english'))
>>> sentence = "this is a foo bar sentence"
>>> print([i for i in sentence.lower().split() if i not in stop])
['foo', 'bar', 'sentence']
>>> [i for i in word_tokenize(sentence.lower()) if i not in stop] 
['foo', 'bar', 'sentence']

I recommend looking at using tf-idf to remove stopwords, see Effects of Stemming on the term frequency?

// This worked for me.
<form  name="myForm" class="css-form" novalidate ng-submit="Save(myForm.$invalid)">
<input type="text" name="uName" ng-model="User.Name" required/>
<span ng-show="User.submitted && myForm.uName.$error.required">Name is required.</span>
<input ng-click="User.submitted=true" ng-disabled="User.submitted && tForm.$invalid" type="submit" value="Save" />
</form>
// in controller
$scope.Save(invalid)
{
if(invalid) return;
// save form
}

Try to Use:

SELECT linkorder
    ,Row_Number() OVER (
        PARTITION BY linkorder ORDER BY linkorder DESC
        ) AS RowNum
FROM u_links

Although Bootstrap CDN restored glyphicons to bootstrap.min.css, Bootstrap CDN's Bootswatch css files doesn't include glyphicons.

For example Amelia theme: http://bootswatch.com/amelia/

Default Amelia has glyphicons in this file: http://bootswatch.com/amelia/bootstrap.min.css

But Bootstrap CDN's css file doesn't include glyphicons: http://netdna.bootstrapcdn.com/bootswatch/3.0.0/amelia/bootstrap.min.css

So as @edsioufi mentioned, you should include you should include glphicons css, if you use Bootswatch files from the bootstrap CDN. File: http://netdna.bootstrapcdn.com/bootstrap/3.0.0/css/bootstrap-glyphicons.css

In bash $1 is the first argument passed to the script, $2 second and so on

/usr/local/bin/abbyyocr9 -rl Swedish -if "$1" -of "$2" 2>&1

So you can use:

./your_script.sh some_source_file.png destination_file.txt

Explanation on double quotes;

consider three scripts:

# foo.sh
bash bar.sh $1

# cat foo2.sh
bash bar.sh "$1"

# bar.sh
echo "1-$1" "2-$2"

Now invoke:

$ bash foo.sh "a b"
1-a 2-b

$ bash foo2.sh "a b"
1-a b 2-

When you invoke foo.sh "a b" then it invokes bar.sh a b (two arguments), and with foo2.sh "a b" it invokes bar.sh "a b" (1 argument). Always have in mind how parameters are passed and expaned in bash, it will save you a lot of headache.

My Kotlin extension function version based on answers above with Compat:

fun Drawable.overrideColor_Ext(context: Context, colorInt: Int) {
    val muted = this.mutate()
    when (muted) {
        is GradientDrawable -> muted.setColor(ContextCompat.getColor(context, colorInt))
        is ShapeDrawable -> muted.paint.setColor(ContextCompat.getColor(context, colorInt))
        is ColorDrawable -> muted.setColor(ContextCompat.getColor(context, colorInt))
        else -> Log.d("Tag", "Not a valid background type")
    }
}

You shouldn't overload the templates with complex logic, it's a bad practice. Remember to always keep it simple!

The better approach would be to extract this logic into reusable function on your $rootScope:

.run(function ($rootScope) {
  $rootScope.inArray = function (item, array) {
    return (-1 !== array.indexOf(item));
  };
})

Then, use it in your template:

<li ng-class="{approved: inArray(jobSet, selectedForApproval)}"></li>

I think everyone will agree that this example is much more readable and maintainable.

I was also getting same issue as i tried using value 0 in non-based indexing,i.e starting with 1, not with zero

I use this one:

LocationManager.requestLocationUpdates(String provider, long minTime, float minDistance, LocationListener listener)

For example, using a 1s interval:

locationManager.requestLocationUpdates(LocationManager.GPS_PROVIDER,1000,0,this);

the time is in milliseconds, the distance is in meters.

This automatically calls:

public void onLocationChanged(Location location) {
    //Code here, location.getAccuracy(), location.getLongitude() etc...
}

I also had these included in the script but didnt actually use them:

public void onStatusChanged(String provider, int status, Bundle extras) {}
public void onProviderEnabled(String provider) {}
public void onProviderDisabled(String provider) {}

In short:

public class GPSClass implements LocationListener {

    public void onLocationChanged(Location location) {
        // Called when a new location is found by the network location provider.
        Log.i("Message: ","Location changed, " + location.getAccuracy() + " , " + location.getLatitude()+ "," + location.getLongitude());
    }

    public void onStatusChanged(String provider, int status, Bundle extras) {}
    public void onProviderEnabled(String provider) {}
    public void onProviderDisabled(String provider) {}

    @Override
    protected void onCreate(Bundle savedInstanceState) {
        super.onCreate(savedInstanceState);
        locationManager = (LocationManager)getSystemService(Context.LOCATION_SERVICE);
        locationManager.requestLocationUpdates(LocationManager.GPS_PROVIDER,1000,0,this);
    }
}

The problem occurred due to the Control validator. Just Add the J Query reference to your web page as follows and then add the Validation Settings in your web.config file to overcome the problem. I too faced the same problem and the below gave the solution to my problem.

Step1:

Step2 :

It will resolve your problem.

the best way (for me) to make it it's the next infrastructure:

<form method="POST">
<input type="submit" formaction="default_url_when_press_enter" style="visibility: hidden; display: none;">
<!-- all your inputs -->
<input><input><input>
<!-- all your inputs -->
<button formaction="action1">Action1</button>
<button formaction="action2">Action2</button>
<input type="submit" value="Default Action">
</form>

with this structure you will send with enter a direction and the infinite possibilities for the rest of buttons.

If you are using Foundation 5 and Compass framework, you can try this.

.sass input

$circle-width: rem-calc(25) !default;
$circle-height: $circle-width !default;
$circle-bg: #fff !default;
$circle-radius: 50% !default;
$circle-line-height: $circle-width !default;
$circle-text-align: center !default;

@mixin circle($cw:$circle-width, $ch:$circle-height, $cb:$circle-bg, $clh:$circle-line-height, $cta:$circle-text-align, $cr:$circle-radius) {
    width: $cw;
    height: $ch;
    background: $cb;
    line-height: $clh;
    text-align: $cta;
    @include inline-block;
    @include border-radius($cr);
}

.circle-default {
    @include circle;
}

.css output

.circle-default {
  width: 1.78571rem;
  height: 1.78571rem;
  background: white;
  line-height: 1.78571rem;
  text-align: center;
  display: -moz-inline-stack;
  display: inline-block;
  vertical-align: middle;
  *vertical-align: auto;
  zoom: 1;
  *display: inline;
  -webkit-border-radius: 50%;
  -moz-border-radius: 50%;
  -ms-border-radius: 50%;
  -o-border-radius: 50%;
  border-radius: 50%;
}

Follow below steps-

Step1 - Ctrl+Shift+P

Step2 - Enter Disable Package

Step3 - enter the package name that you want to disable and press enter

Successfully removed, if not removed then restart Sublime

Your forms are automatically put into $scope as an object. It can be accessed via $scope[formName]

Below is an example that will work with your original setup and without having to pass the form itself as a parameter in ng-submit.

var controller = function($scope) {

    $scope.login = {
        submit: function() {
            if($scope.loginform.$invalid) return false;

        }
    }

};

Working example: http://plnkr.co/edit/BEWnrP?p=preview

If you are using default SeekBar provided by android Sdk then their is a simple way to change the color of that . just go to color.xml inside /res/values/colors.xml and change the colorAccent.

<resources>
    <color name="colorPrimary">#212121</color>
    <color name="colorPrimaryDark">#1e1d1d</color>
     <!-- change below line -->
    <color name="colorAccent">#FF4081</color>
</resources>

The answer already been accepted, I just write a short technique for the same purpose.

var fieldPair = '';
$(":input").each(function(){
fieldPair += $(this).attr("name") + ':' + $(this).val() + ';';
});

console.log(fieldPair);

Demo: http://jsfiddle.net/sunnycpp/u4vjR/2/

Here I have created handle-destroy directive.

ctrl.directive('handleDestroy', function() {
    return function(scope, tElement, attributes) {        
        scope.$on('$destroy', function() {
            alert("In destroy of:" + scope.todo.text);
        });
    };
});

no need for the padding or the corners.

here's a sample:

<shape xmlns:android="http://schemas.android.com/apk/res/android" android:shape="oval" >
    <gradient android:startColor="#FFFF0000" android:endColor="#80FF00FF"
        android:angle="270"/>
</shape>

based on :

https://stackoverflow.com/a/10104037/878126

Your css is fine, but I think it's not applying on divs. Just write simple class name and then try. You can check it at Jsfiddle.

.left {
  float: left;
  width: 125px;
  text-align: right;
  margin: 2px 10px;
  display: inline;
}

.right {
  float: left;
  text-align: left;
  margin: 2px 10px;
  display: inline;
}

For RubyOnRails app add localhost If you use custom Postgresql version

# config/database.yml
default: &default
  host: localhost

If you are storing values via any programming language

Here is an example in C#

To store date you have to convert it first and then store it

insert table1 (foodate)
   values (FooDate.ToString("MM/dd/yyyy"));

FooDate is datetime variable which contains your date in your format.

INSERT syntax cannot have WHERE clause. The only time you will find INSERT has WHERE clause is when you are using INSERT INTO...SELECT statement.

The first syntax is already correct.

This works to sign the user out of the application, but not Google.

var auth2 = gapi.auth2.getAuthInstance();
auth2.signOut().then(function () {
  console.log('User signed out.');
});

Source: https://developers.google.com/identity/sign-in/web/sign-in

All the validator error has been solved by this

 <appSettings>
<add key="ValidationSettings:UnobtrusiveValidationMode" value="None"/>

Error must be vanished enjoy....

This post contains a brilliant trick to detect where the cascade problem is:
Try to replace on Cascade at the time with Cascade.None() until you do not get the error and then you have detected the cascade causing the problem.

Then solve the problem either by changing the original cascade to something else or using Tom Anderson answer.

I had the same issue with google sign in.

I had correctly entered my callbacks in google Credential panel at google developer console here was my redirect urls :

https://www.example.com/signin-google

https://www.example.com/signin-google/

https://www.example.com/oauth2callback

https://www.example.com/oauth2callback/

Everything seems fine right? But it still didn't work until I added one more magical Url I added signin-google URL (which is default google callback) without www and problem solved.

Take it into account (depending on your domain) you may or may not need to add both with and without www URLs

This may be old, but I may as well write what I've learned down. So anyway I did it this way.

---------->

Before you start, make sure the Apache rewrites module is enabled and then follow the steps below.

1) Log-in to your Magento administration area then go to System > Configuration > Web.

2) Navigate to the Unsecure and Secure tabs. Make sure the Unsecured and Secure - Base Url options have your domain name within it, and do not leave the forward slash off at the end of the URL. Example: http://www.yourdomain.co.uk/

3) While still on the Web page, navigate to Search Engine Optimisation tab and select YES underneath the Use Web Server Rewrites option.

4) Navigate to the Secure tab again (if not already on it) and select Yes on the Use Secure URLs in Front-End option.

5) Now go to the root of your Magento website folder and use this code for your .htaccess:

<IfModule mod_rewrite.c>
RewriteEngine On
RewriteBase /
RewriteRule ^index\.php$ - [L]
RewriteCond %{REQUEST_FILENAME} !-f
RewriteCond %{REQUEST_FILENAME} !-d
RewriteRule . /index.php [L]
</IfModule>

Save the .htaccess and replace the original file. (PLEASE MAKE SURE TO BACKUP YOUR ORIGINAL .htaccess FILE BEFORE MESSING WITH IT!!!)

6) Now go to System > Cache Management and select all fields and make sure the Actions dropdown is set on Refresh, then submit. (This will of-course refresh the Cache.)

---------->

If this did not work please follow these extra steps.

7) Go to System > Configuration > web again. This time look for the Current Configuration Scope and select your website from the dropdown menu. (This is of course, it is set to Default Config)

8) Make sure the Unsecure and Secure fields contain the same domain as the previous Default Config file.

9) Navigate to the Search Engines Optimisation tab and select Yes underneath the Use Web Server Rewrites section.

10) Once the URLs are the same, and the rewrite is enabled save that page, then go back and make sure they are all checked as default, then save again if needed.

11) Repeat step 6.

Now your index.php problem should be fixed and all should be well!!!

I hope this helps, and good luck.

You have to call the super.paintComponent(); as well, to allow the Java API draw the original background. The super refers to the original JPanel code.

public void paintComponent(Graphics g){
    super.paintComponent(g);

    g.setColor(Color.red);
    g.fillOval(player.getxCenter(), player.getyCenter(), player.getRadius(), player.getRadius());
}

it is just a sample to avoid max recursion error. we have to use option (maxrecursion 365); or option (maxrecursion 0);

DECLARE @STARTDATE datetime; 
DECLARE @EntDt datetime; 
set @STARTDATE = '01/01/2009';  
set @EntDt = '12/31/2009'; 
declare @dcnt int; 
;with DateList as   
 (   
    select @STARTDATE DateValue   
    union all   
    select DateValue + 1 from    DateList      
    where   DateValue + 1 < convert(VARCHAR(15),@EntDt,101)   
 )   
  select count(*) as DayCnt from (   
  select DateValue,DATENAME(WEEKDAY, DateValue ) as WEEKDAY from DateList
  where DATENAME(WEEKDAY, DateValue ) not IN ( 'Saturday','Sunday' )     
  )a
option (maxrecursion 365);

I have faced the same problem with a character that I never managed to match with a where query - CHARINDEX, LIKE, REPLACE, etc. did not work. Then I have used a brute force solution which is awful, heavy but works:

Step 1: make a copy of the complete data set - keep track of the original names with an source_id referencing the pk of the source table (and keep this source id in all the subsequent tables). Step 2: LTRIM RTRIM the data, and replace all double spaces, tab, etc (basically all the CHAR(1) to CHAR(32) by one space. Lowercase the whole set as well. Step 3: replace all the special characters that you know (get the list of all the quotes, double quotes, etc.) by something from a-z (I suggest z). Basically replace everything that is not standard English characters by a z (using nested REPLACE of REPLACE in a loop). Step 4: split by word into a second copy, where each word is in a separate row - the split is a SUBSTRING based on the position of the space characters - at this point, we should miss the ones where there's a hidden space that we did not catche earlier. Step 5: split each word into a third copy, where each letter is in a separate row (I know it makes a very large table) - keep track of the charindex of each letter in a separate column. Step 6: Select everything in the above table which is not LIKE [a-z]. This is the list of the unidentified characters we want to exclude.

From the output of step 6 we have enough data to make a series of substring of the source to select everything but the unknown character we want to exclude.

Note 1: there are smart ways to optimize this, depending on the size of the original expression (steps 4, 5 and 6 can be made in one go).

Note 2: this is not very fast, but the fastest way to get this done for a large data set, because the split of lines into words and words into letters is made by substring, which slices all the table into one character slices. However, this is quite heavy to build. With a smaller set, it may be enough to parse each record one by one and search for character which is not in a list of all English characters plus all special characters.

I am going to give you a simplistic answer that hopefully will help you with VBA in general. The easiest way to learn how VBA works and how to reference and access elements is to record your macro then edit it in the VBA editor. This is how I learned VBA. It is based on visual basic so all the programming conventions of VB apply. Recording the macro lets you see how to access and do things.

you could use something like this:

var result = 0
Sheets("Sheet1").Select
result = Range("A1").Value * Range("B1").Value
Sheets("Sheet2").Select
Range("D1").Value = result

Alternatively you can also reference a cell using Cells(1,1).Value This way you can set variables and increment them as you wish. I think I am just not clear on exactly what you are trying to do but i hope this helps.

I'm not sure it's worth it for me to type this all up from scratch since this article published in A List Apart does a pretty good job explaining it. MDN also has a handy guide for HTML5 forms and validation (covering the API and also the related CSS).

The answer of @jfmercer must be modified slightly to work with current brew, because the output of brew missing has changed:

brew deps [FORMULA] | xargs brew remove --ignore-dependencies && brew missing | cut -f1 -d: | xargs brew install

Here is how to detect deleted files and stage their deletion as part of the next commit. All the solutions on this thread have different merits. This solution bellow specifically deals with the problem of file names with spaces in them.

git status --porcelain | awk '/^.D .*$/ {print $0}' | sed 's/.D \(.*\)/\1/' | tr -d '"' | xargs -I {} git rm '{}'

make sure you test this with git's --dry-run option before running it with the following:

git status --porcelain | awk '/^.D .*$/ {print $0}' | sed 's/.D \(.*\)/\1/' | tr -d '"' | xargs -I {} git rm --dry-run '{}'

explanation:

git status --porcelain

This prints out something like D "/path to a folder/path to a file" which happens only when there are spaces in the path names

awk '/^.D .*$/ {print $0}'

match only lines that start with " D "

sed 's/ D \(.*\)/\1/'

remove " D " from the front of each string

tr -d '"'

remove quotes, if any

xargs -I {} git rm '{}'

define file name variables as {} run file name under git rm enclosed in single quotes in order to make sure that it supports file names with spaces.

//Just use a List
//create the list
public final List<Object> myObjects;

//instantiate the list
myObjects = new ArrayList<Object>();

//add objects to the list
Object object = myObject;
myObjects.add(object);

//remove the object calling this method if you have more than 1 objects still works with 1
//object too.

private void removeObject(){
int len = myObjects.size();
for(int i = 0;i<len; i++){
Objects object = myObjects.get(i);
myObjects.remove(object);
}
}

I recently got this error.

What worked for me is checking in the mysql workbench 'Users and Privileges' and realizing user still existed.

After deleting it from there, I was able to recreate the user.

You can define foreign key by:

public class Parent
{
   public int Id { get; set; }
   public virtual ICollection<Child> Childs { get; set; }
}

public class Child
{
   public int Id { get; set; }
   // This will be recognized as FK by NavigationPropertyNameForeignKeyDiscoveryConvention
   public int ParentId { get; set; } 
   public virtual Parent Parent { get; set; }
}

Now ParentId is foreign key property and defines required relation between child and existing parent. Saving the child without exsiting parent will throw exception.

If your FK property name doesn't consists of the navigation property name and parent PK name you must either use ForeignKeyAttribute data annotation or fluent API to map the relation

Data annotation:

// The name of related navigation property
[ForeignKey("Parent")]
public int ParentId { get; set; }

Fluent API:

modelBuilder.Entity<Child>()
            .HasRequired(c => c.Parent)
            .WithMany(p => p.Childs)
            .HasForeignKey(c => c.ParentId);

Other types of constraints can be enforced by data annotations and model validation.

Edit:

You will get an exception if you don't set ParentId. It is required property (not nullable). If you just don't set it it will most probably try to send default value to the database. Default value is 0 so if you don't have customer with Id = 0 you will get an exception.

You should delete old child items thisParent.ChildItems one by one manually. Entity Framework doesn't do that for you. It finally cannot decide what you want to do with the old child items - if you want to throw them away or if you want to keep and assign them to other parent entities. You must tell Entity Framework your decision. But one of these two decisions you HAVE to make since the child entities cannot live alone without a reference to any parent in the database (due to the foreign key constraint). That's basically what the exception says.

Edit

What I would do if child items could be added, updated and deleted:

public void UpdateEntity(ParentItem parent)
{
    // Load original parent including the child item collection
    var originalParent = _dbContext.ParentItems
        .Where(p => p.ID == parent.ID)
        .Include(p => p.ChildItems)
        .SingleOrDefault();
    // We assume that the parent is still in the DB and don't check for null

    // Update scalar properties of parent,
    // can be omitted if we don't expect changes of the scalar properties
    var parentEntry = _dbContext.Entry(originalParent);
    parentEntry.CurrentValues.SetValues(parent);

    foreach (var childItem in parent.ChildItems)
    {
        var originalChildItem = originalParent.ChildItems
            .Where(c => c.ID == childItem.ID && c.ID != 0)
            .SingleOrDefault();
        // Is original child item with same ID in DB?
        if (originalChildItem != null)
        {
            // Yes -> Update scalar properties of child item
            var childEntry = _dbContext.Entry(originalChildItem);
            childEntry.CurrentValues.SetValues(childItem);
        }
        else
        {
            // No -> It's a new child item -> Insert
            childItem.ID = 0;
            originalParent.ChildItems.Add(childItem);
        }
    }

    // Don't consider the child items we have just added above.
    // (We need to make a copy of the list by using .ToList() because
    // _dbContext.ChildItems.Remove in this loop does not only delete
    // from the context but also from the child collection. Without making
    // the copy we would modify the collection we are just interating
    // through - which is forbidden and would lead to an exception.)
    foreach (var originalChildItem in
                 originalParent.ChildItems.Where(c => c.ID != 0).ToList())
    {
        // Are there child items in the DB which are NOT in the
        // new child item collection anymore?
        if (!parent.ChildItems.Any(c => c.ID == originalChildItem.ID))
            // Yes -> It's a deleted child item -> Delete
            _dbContext.ChildItems.Remove(originalChildItem);
    }

    _dbContext.SaveChanges();
}

Note: This is not tested. It's assuming that the child item collection is of type ICollection. (I usually have IList and then the code looks a bit different.) I've also stripped away all repository abstractions to keep it simple.

I don't know if that is a good solution, but I believe that some kind of hard work along these lines must be done to take care of all kinds of changes in the navigation collection. I would also be happy to see an easier way of doing it.

<asp:RequiredFieldValidator InitialValue="-1" ID="Req_ID" Display="Dynamic" 
    ValidationGroup="g1" runat="server" ControlToValidate="ControlID"
    Text="*" ErrorMessage="ErrorMessage"></asp:RequiredFieldValidator>

@GaryK answer is absolutely great, I've spent an hour looking for an explanation orphanRemoval = true vs CascadeType.REMOVE and it helped me understand.

Summing up: orphanRemoval = true works identical as CascadeType.REMOVE ONLY IF we deleting object (entityManager.delete(object)) and we want the childs objects to be removed as well.

In completely different sitiuation, when we fetching some data like List<Child> childs = object.getChilds() and then remove a child (entityManager.remove(childs.get(0)) using orphanRemoval=true will cause that entity corresponding to childs.get(0) will be deleted from database.

You probably want to use an ExpandableListView, a special ListView that allows you to open and close groups.

After inserting new row to ListView, I just scroll the ListView to new position.

ListView.smoothScrollToPosition(position);

You may use this class to test two accessing threads and one mutating the shared instance of ConcurrentHashMap:

import java.util.Map;
import java.util.Random;
import java.util.UUID;
import java.util.concurrent.ConcurrentHashMap;
import java.util.concurrent.ExecutorService;
import java.util.concurrent.Executors;

public class ConcurrentMapIteration
{
  private final Map<String, String> map = new ConcurrentHashMap<String, String>();

  private final static int MAP_SIZE = 100000;

  public static void main(String[] args)
  {
    new ConcurrentMapIteration().run();
  }

  public ConcurrentMapIteration()
  {
    for (int i = 0; i < MAP_SIZE; i++)
    {
      map.put("key" + i, UUID.randomUUID().toString());
    }
  }

  private final ExecutorService executor = Executors.newCachedThreadPool();

  private final class Accessor implements Runnable
  {
    private final Map<String, String> map;

    public Accessor(Map<String, String> map)
    {
      this.map = map;
    }

    @Override
    public void run()
    {
      for (Map.Entry<String, String> entry : this.map.entrySet())
      {
        System.out.println(
            Thread.currentThread().getName() + " - [" + entry.getKey() + ", " + entry.getValue() + ']'
        );
      }
    }
  }

  private final class Mutator implements Runnable
  {

    private final Map<String, String> map;
    private final Random random = new Random();

    public Mutator(Map<String, String> map)
    {
      this.map = map;
    }

    @Override
    public void run()
    {
      for (int i = 0; i < 100; i++)
      {
        this.map.remove("key" + random.nextInt(MAP_SIZE));
        this.map.put("key" + random.nextInt(MAP_SIZE), UUID.randomUUID().toString());
        System.out.println(Thread.currentThread().getName() + ": " + i);
      }
    }
  }

  private void run()
  {
    Accessor a1 = new Accessor(this.map);
    Accessor a2 = new Accessor(this.map);
    Mutator m = new Mutator(this.map);

    executor.execute(a1);
    executor.execute(m);
    executor.execute(a2);
  }
}

No exception will be thrown.

Sharing the same iterator between accessor threads can lead to deadlock:

import java.util.Iterator;
import java.util.Map;
import java.util.Random;
import java.util.UUID;
import java.util.concurrent.ConcurrentHashMap;
import java.util.concurrent.ExecutorService;
import java.util.concurrent.Executors;

public class ConcurrentMapIteration
{
  private final Map<String, String> map = new ConcurrentHashMap<String, String>();
  private final Iterator<Map.Entry<String, String>> iterator;

  private final static int MAP_SIZE = 100000;

  public static void main(String[] args)
  {
    new ConcurrentMapIteration().run();
  }

  public ConcurrentMapIteration()
  {
    for (int i = 0; i < MAP_SIZE; i++)
    {
      map.put("key" + i, UUID.randomUUID().toString());
    }
    this.iterator = this.map.entrySet().iterator();
  }

  private final ExecutorService executor = Executors.newCachedThreadPool();

  private final class Accessor implements Runnable
  {
    private final Iterator<Map.Entry<String, String>> iterator;

    public Accessor(Iterator<Map.Entry<String, String>> iterator)
    {
      this.iterator = iterator;
    }

    @Override
    public void run()
    {
      while(iterator.hasNext()) {
        Map.Entry<String, String> entry = iterator.next();
        try
        {
          String st = Thread.currentThread().getName() + " - [" + entry.getKey() + ", " + entry.getValue() + ']';
        } catch (Exception e)
        {
          e.printStackTrace();
        }

      }
    }
  }

  private final class Mutator implements Runnable
  {

    private final Map<String, String> map;
    private final Random random = new Random();

    public Mutator(Map<String, String> map)
    {
      this.map = map;
    }

    @Override
    public void run()
    {
      for (int i = 0; i < 100; i++)
      {
        this.map.remove("key" + random.nextInt(MAP_SIZE));
        this.map.put("key" + random.nextInt(MAP_SIZE), UUID.randomUUID().toString());
      }
    }
  }

  private void run()
  {
    Accessor a1 = new Accessor(this.iterator);
    Accessor a2 = new Accessor(this.iterator);
    Mutator m = new Mutator(this.map);

    executor.execute(a1);
    executor.execute(m);
    executor.execute(a2);
  }
}

As soon as you start sharing the same Iterator<Map.Entry<String, String>> among accessor and mutator threads java.lang.IllegalStateExceptions will start popping up.

import java.util.Iterator;
import java.util.Map;
import java.util.Random;
import java.util.UUID;
import java.util.concurrent.ConcurrentHashMap;
import java.util.concurrent.ExecutorService;
import java.util.concurrent.Executors;

public class ConcurrentMapIteration
{
  private final Map<String, String> map = new ConcurrentHashMap<String, String>();
  private final Iterator<Map.Entry<String, String>> iterator;

  private final static int MAP_SIZE = 100000;

  public static void main(String[] args)
  {
    new ConcurrentMapIteration().run();
  }

  public ConcurrentMapIteration()
  {
    for (int i = 0; i < MAP_SIZE; i++)
    {
      map.put("key" + i, UUID.randomUUID().toString());
    }
    this.iterator = this.map.entrySet().iterator();
  }

  private final ExecutorService executor = Executors.newCachedThreadPool();

  private final class Accessor implements Runnable
  {
    private final Iterator<Map.Entry<String, String>> iterator;

    public Accessor(Iterator<Map.Entry<String, String>> iterator)
    {
      this.iterator = iterator;
    }

    @Override
    public void run()
    {
      while (iterator.hasNext())
      {
        Map.Entry<String, String> entry = iterator.next();
        try
        {
          String st =
              Thread.currentThread().getName() + " - [" + entry.getKey() + ", " + entry.getValue() + ']';
        } catch (Exception e)
        {
          e.printStackTrace();
        }

      }
    }
  }

  private final class Mutator implements Runnable
  {

    private final Random random = new Random();

    private final Iterator<Map.Entry<String, String>> iterator;

    private final Map<String, String> map;

    public Mutator(Map<String, String> map, Iterator<Map.Entry<String, String>> iterator)
    {
      this.map = map;
      this.iterator = iterator;
    }

    @Override
    public void run()
    {
      while (iterator.hasNext())
      {
        try
        {
          iterator.remove();
          this.map.put("key" + random.nextInt(MAP_SIZE), UUID.randomUUID().toString());
        } catch (Exception ex)
        {
          ex.printStackTrace();
        }
      }

    }
  }

  private void run()
  {
    Accessor a1 = new Accessor(this.iterator);
    Accessor a2 = new Accessor(this.iterator);
    Mutator m = new Mutator(map, this.iterator);

    executor.execute(a1);
    executor.execute(m);
    executor.execute(a2);
  }
}

You can add the rules based on that selector using .rules("add", options), just remove any rules you want class based out of your validate options, and after calling $(".formToValidate").validate({... });, do this:

$(".checkBox").rules("add", { 
  required:true,  
  minlength:3
});

You can also do it in code if you need more control, for example multiple colors and positioning. Here is my Kotlin snippet to create a drawable radial gradient:

object ShaderUtils {
    private class RadialShaderFactory(private val colors: IntArray, val positionX: Float,
                                      val positionY: Float, val size: Float): ShapeDrawable.ShaderFactory() {

        override fun resize(width: Int, height: Int): Shader {
            return RadialGradient(
                    width * positionX,
                    height * positionY,
                    minOf(width, height) * size,
                    colors,
                    null,
                    Shader.TileMode.CLAMP)
        }
    }

    fun radialGradientBackground(vararg colors: Int, positionX: Float = 0.5f, positionY: Float = 0.5f,
                                 size: Float = 1.0f): PaintDrawable {
        val radialGradientBackground = PaintDrawable()
        radialGradientBackground.shape = RectShape()
        radialGradientBackground.shaderFactory = RadialShaderFactory(colors, positionX, positionY, size)
        return radialGradientBackground
    }
}

Basic usage (but feel free to adjust with additional params):

view.background = ShaderUtils.radialGradientBackground(Color.TRANSPARENT, BLACK)

I like mtkopone's answer using jQuery special events, but note that it doesn't work a) when elements are detached instead of removed or b) when some old non-jquery libraries use innerHTML to destroy your elements

To obtain multiple outputs from a function and keep them in the desired format you can save the outputs to your hard disk (in the working directory) from within the function and then load them from outside the function:

myfun <- function(x) {
                      df1 <- ...
                      df2 <- ...
                      save(df1, file = "myfile1")
                      save(df2, file = "myfile2")
}
load("myfile1")
load("myfile2")

You can try this way also.

<?php
     $obj = json_decode("{}"); 
     var_dump($obj);
?>

Output:

object(stdClass)#1 (0) { }

The conflict message:

CONFLICT (delete/modify): res/layout/dialog_item.xml deleted in dialog and modified in HEAD

means that res/layout/dialog_item.xml was deleted in the 'dialog' branch you are merging, but was modified in HEAD (in the branch you are merging to).

So you have to decide whether

• remove file using "git rm res/layout/dialog_item.xml"

or

• accept version from HEAD (perhaps after editing it) with "git add res/layout/dialog_item.xml"

Then you finalize merge with "git commit".

Note that git will warn you that you are creating a merge commit, in the (rare) case where it is something you don't want. Probably remains from the days where said case was less rare.

drop database <db_name>;
FLUSH PRIVILEGES;

I've tried making an object and tried using .getWidth and .getHeight but can't get it to work.

That´s because you are not setting the width and height fields in JFrame, but you are setting them on local variables. Fields HEIGHT and WIDTH are inhereted from ImageObserver

Fields inherited from interface java.awt.image.ImageObserver
ABORT, ALLBITS, ERROR, FRAMEBITS, HEIGHT, PROPERTIES, SOMEBITS, WIDTH

See http://java.sun.com/javase/6/docs/api/javax/swing/JFrame.html

If width and height represent state of the frame, then you could refactorize them to fields, and write getters for them.

Then, you could create a Constructor that receives both values as parameters

public class DrawFrame extends JFrame {
 private int width;
 private int height;

 DrawFrame(int _width, int _height){

   this.width = _width;
   this.height = _height;

   //other stuff here
}
 public int getWidth(){}
 public int getHeight(){}

 //other methods
}

If widht and height are going to be constant (after created) then you should use the final modifier. This way, once they are assigned a value, they can´t be modified.

Also, the variables i use in DrawCircle, should I have them in the constructor or not?

The way it is writen now, will only allow you to create one type of circle. If you wan´t to create different circles, you should overload the constructor with one with arguments).

For example, if you want to change the attributes xPoint and yPoint, you could have a constructor

public DrawCircle(int _xpoint, int _ypoint){
  //build circle here.
 }

EDIT:

Where does _width and _height come from?

Those are arguments to constructors. You set values on them when you call the Constructor method.

In DrawFrame I set width and height. In DrawCircle I need to access the width and height of DrawFrame. How do I do this?

DrawFrame(){
   int width = 400;
   int height =400;

   /*
   * call DrawCircle constructor
   */
   content.pane(new DrawCircle(width,height));

   // other stuff

}

Now when the DrawCircle constructor executes, it will receive the values you used in DrawFrame as _width and _height respectively.

EDIT:

Try doing

 DrawFrame frame = new DrawFrame();//constructor contains code on previous edit.
 frame.setPreferredSize(new Dimension(400,400));

http://java.sun.com/docs/books/tutorial/uiswing/components/frame.html

A CustomValidator would also work here:

<asp:CustomValidator runat="server"
    ID="valDateRange" 
    ControlToValidate="txtDatecompleted"
    onservervalidate="valDateRange_ServerValidate" 
    ErrorMessage="enter valid date" />

Code-behind:

protected void valDateRange_ServerValidate(object source, ServerValidateEventArgs args)
{
    DateTime minDate = DateTime.Parse("1000/12/28");
    DateTime maxDate = DateTime.Parse("9999/12/28");
    DateTime dt;

    args.IsValid = (DateTime.TryParse(args.Value, out dt) 
                    && dt <= maxDate 
                    && dt >= minDate);
}

Use this:

<asp:CustomValidator runat="server" id="vld" ValidateEmptyText="true"/>

To validate an empty field.

You don't need to add 2 validators !

I just include the latest version from the jQuery site: http://code.jquery.com/jquery-latest.pack.js It suits my needs and I never have to worry about updating.

EDIT:For a major web app, certainly control it; download it and serve it yourself. But for my personal site, I could not care less. Things don't magically disappear, they are usually deprecated first. I keep up with it enough to know what to change for future releases.

If you are using NHibernate, check that appropriate DateTime properties that are nullable are set to nullable in the mappings.

If you have perl installed, then perl -i -n -e"print unless m{(ERROR|REFERENCE)}" should do the trick.

The problem isn't that null cannot be assigned to an int?. The problem is that both values returned by the ternary operator must be the same type, or one must be implicitly convertible to the other. In this case, null cannot be implicitly converted to int nor vice-versus, so an explict cast is necessary. Try this instead:

int? accom = (accomStr == "noval" ? (int?)null : Convert.ToInt32(accomStr));

*

C++ community has heard your request :)

*

C++ 20 provides an easy way of doing it now. It gets as simple as :

#include <vector>
...
vector<int> cnt{5, 0, 2, 8, 0, 7};
std::erase(cnt, 0);

You should check out std::erase and std::erase_if.

Not only will it remove all elements of the value (here '0'), it will do it in O(n) time complexity. Which is the very best you can get.

If your compiler does not support C++ 20, you should use erase-remove idiom:

#include <algorithm>
...
vec.erase(std::remove(vec.begin(), vec.end(), 0), vec.end());

I use:

function isString(s) {
    return typeof(s) === 'string' || s instanceof String;
}

Because in JavaScript strings can be literals or objects.

I solved the problem with the following workaround. Note that I am also scaling the image, which was necessary to avoid OutOfMemoryExceptions.

Beware that this solution will not work properly with portrait images or opside-down images (thank you Timmmm for noting). Timmmm's solution above might be the better choice if that is required and it looks more elegant, too: https://stackoverflow.com/a/8914291/449918

File path = // ... location of your bitmap file
int w = 512; int h = 384; // size that does not lead to OutOfMemoryException on Nexus One
Bitmap b = BitmapFactory.decodeFile(path);


// Hack to determine whether the image is rotated
boolean rotated = b.getWidth() > b.getHeight();

Bitmap resultBmp = null;

// If not rotated, just scale it
if (!rotated) {
    resultBmp = Bitmap.createScaledBitmap(b, w, h, true);
    b.recycle();
    b = null;

// If rotated, scale it by switching width and height and then rotated it
} else {
    Bitmap scaledBmp = Bitmap.createScaledBitmap(b, h, w, true);
    b.recycle();
    b = null;

    Matrix mat = new Matrix();
    mat.postRotate(90);
    resultBmp = Bitmap.createBitmap(scaledBmp, 0, 0, h, w, mat, true);

    // Release image resources
    scaledBmp.recycle();
    scaledBmp = null;
}

// resultBmp now contains the scaled and rotated image

Cheers

Try installing "Git Credential Manager For Windows" (and following instructions for setting up the credential manager).

When required within an app using Git (e.g. VS Code) it will "magically" open the required dialog for Visual Studio Team Services credential input.

Solution 1:

display:table-cell (not widely supported)

Solution 2:

tables

(I hate hacks.)

Split using a regular expression. Note I made the case more general with leading spaces. The list comprehension is to remove the null strings at the front and back.

>>> import re
>>> string = "  blah, lots  ,  of ,  spaces, here "
>>> pattern = re.compile("^\s+|\s*,\s*|\s+$")
>>> print([x for x in pattern.split(string) if x])
['blah', 'lots', 'of', 'spaces', 'here']

This works even if ^\s+ doesn't match:

>>> string = "foo,   bar  "
>>> print([x for x in pattern.split(string) if x])
['foo', 'bar']
>>>

Here's why you need ^\s+:

>>> pattern = re.compile("\s*,\s*|\s+$")
>>> print([x for x in pattern.split(string) if x])
['  blah', 'lots', 'of', 'spaces', 'here']

See the leading spaces in blah?

Clarification: above uses the Python 3 interpreter, but results are the same in Python 2.

Verify you haven't goofed your remote URL.

I just wanted to also mention that I ran into this after enabling Git as a CVS in a local Jenkins build configuration. It appears that Jenkins checked out the most recent commit of the branch I gave it and also reset my remote to correspond to the paths I gave it to the repo. Had to checkout my feature branch again and fix my origin remote url with 'git remote set-url'. Don't go pointing a build tool to your working directory or you'll have a bad time. My remote was set to a file path to my working directory, so it naturally reported everything up-to-date when I attempted to push changes with the same source and destination.

For SDK 29 :

String str1 = "";
folder1 = new File(String.valueOf(Environment.getExternalStoragePublicDirectory(Environment.DIRECTORY_MOVIES)));
if (folder1.exists()) {str1 = folder1.toString() + File.separator;}

public static void createTextFile(String sBody, String FileName, String Where) {
    try {
        File gpxfile = new File(Where, FileName);
        FileWriter writer = new FileWriter(gpxfile);
        writer.append(sBody);
        writer.flush();
        writer.close();
    } catch (IOException e) {
        e.printStackTrace();
    }
}

Then you can save your file like this :

createTextFile("This is Content","file.txt",str1);

Enable assembly binding logging set the registry value EnableLog in HKLM\Software\Microsoft\Fusion to 1. Note that you have to restart your application (use iisreset) for the changes to have any effect.

Tip: Remember to turn off fusion logging when you are done since there is a performance penalty to have it turned on.

ArrayList<Integer> list = new ArrayList<>();
int number, total = 0;

for(int i = 0; i <= list.size(); i++){
    System.out.println("Enter number " + (i + 1) + " or enter -1 to end: ");
    number = input.nextInt();

    list.add(number);

    if(number == -1){
        list.remove(list.size() - 1);
        break;
    }
}
System.out.println(list.toString());

for(int i: list){
    System.out.print(i + "  ");
    total+= i;
}
System.out.println();
System.out.println("The sum of the array content is: " + total);

<a download="custom-filename.jpg" href="/path/to/image" title="ImageName">
    <img alt="ImageName" src="/path/to/image">
</a>

It's not yet fully supported caniuse, but you can use with modernizr (under Non-core detects) to check the support of the browser.

You can either do this with the following:

Calendar cal = Calendar.getInstance();
cal.set(year, month, dayOfMonth, 0, 0, 0);
Date date = cal.getTime();

Change

$array=array_map('intval', explode(',', $string));

To:

$array= implode(',', array_map('intval', explode(',', $string)));

array_map returns an array, not a string. You need to convert the array to a comma separated string in order to use in the WHERE clause.

Your question is a bit vague, but I suppose UPSERT could be considered a design pattern. For languages that don't implement MERGE, a number of alternatives to solve the problem (if a suitable rows exists, UPDATE; else INSERT) exist.

I would just do this:

request.getRemoteUser();

RewriteEngine on
RewriteRule ^(.*)\.html$ $1.php%{QUERY_STRING} [L]

Put these two lines at the top of your .htaccess file. It will show .html in the URL for your .php pages.

RewriteEngine on
RewriteRule ^(.*)\.php$ $1.html%{QUERY_STRING} [L]

Use this for showing .php in URL for your .html pages.

Tools-> Preferences -> Database ->Worksheet

Enter desired size in "Max rows to print in a script"

Save changes.

Officially, you can't. But someone's been extracting them for your convenience and hosting them.

Note: You can get the older releases on the official site, but the latest ones are part of the WDK.

Since November 2013 there has been an unofficial feature request open with GitHub to ask them to add a very simple and intuitive method to keep a local fork in sync with upstream:

https://github.com/isaacs/github/issues/121

Note: Since the feature request is unofficial it is also advisable to contact [email protected] to add your support for a feature like this to be implemented. The unofficial feature request above could be used as evidence of the amount of interest in this being implemented.

The accepted answer wasn't working for me when trying to parse the registry for uninstall strings, and execute them. Turns out I didn't need the call to Invoke-Expression after all.

I finally came across this nice template for seeing how to execute uninstall strings:

$path = 'HKLM:\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall'
$app = 'MyApp'
$apps= @{}
Get-ChildItem $path | 
    Where-Object -FilterScript {$_.getvalue('DisplayName') -like $app} | 
    ForEach-Object -process {$apps.Set_Item(
        $_.getvalue('UninstallString'),
        $_.getvalue('DisplayName'))
    }

foreach ($uninstall_string in $apps.GetEnumerator()) {
    $uninstall_app, $uninstall_arg = $uninstall_string.name.split(' ')
    & $uninstall_app $uninstall_arg
}

This works for me, namely because $app is an in house application that I know will only have two arguments. For more complex uninstall strings you may want to use the join operator. Also, I just used a hash-map, but really, you'd probably want to use an array.

Also, if you do have multiple versions of the same application installed, this uninstaller will cycle through them all at once, which confuses MsiExec.exe, so there's that too.

1) Add the following line to /etc/security/limits.conf

webuser hard nofile 64000

then login as webuser

su - webuser

2) Edit following two files for webuser

append .bashrc and .bash_profile file by running

echo "ulimit -n 64000" >> .bashrc ; echo "ulimit -n 64000" >> .bash_profile

3) Log out, then log back in and verify that the changes have been made correctly:

$ ulimit -a | grep open
open files                      (-n) 64000

Thats it and them boom, boom boom.

It is used to stop the propagation of the event. You see when you have two elements both with a click event handler (for example)

-----------------------------------
| element1                        |
|   -------------------------     |
|   |element2               |     |
|   -------------------------     |
|                                 |
-----------------------------------

If you click on the inner element (element2) it will trigger a click event in both elements: 1 and 2. It is called "Event bubbling". If you want to handle the event in element2 only, then the event handler has to return false to stop the event propagation.

Another example will be the link onclick handler. If you want to stop a link form working. You can add an onclick handler and return false. To stop the event from propagating to the default handler.

hi firstly there seems to be many 'errors' in your html where you are missing closing tags, you could try wrapping the contents of your <body> in a fixed width <div style="margin: 0 auto; width: 900px> to achieve what you have done with the body {margin: 0 10% 0 10%}

May not be related to the question here. But I found it could be useful when using ROW_NUMBER -

SELECT *,
ROW_NUMBER() OVER (ORDER BY (SELECT 100)) AS Any_ID 
FROM #Any_Table

Update for new vuetify version

In v.2.x.x , we can use align and justify. We have below options for setup the horizontal and vertical alignment.

1. PROPS align : 'start','center','end','baseline','stretch'

2. PRPS justify : 'start','center','end','space-around','space-between'

<v-container fill-height fluid>
  <v-row align="center"
      justify="center">
      <v-col></v-col>
  </v-row>
</v-container>

For more details please refer this vuetify grid-system and you could check here with working codepen demo.

Original answer

You could use align-center for layout and fill-height for container.

Demo with v1.x.x

new Vue({
  el: '#app' 
})

.bg{
    background: gray;
    color: #fff;
    font-size: 18px;
}

<link href="https://cdn.jsdelivr.net/npm/[email protected]/dist/vuetify.min.css" rel="stylesheet" />
<script src="https://cdn.jsdelivr.net/npm/vue/dist/vue.min.js"></script>
<script src="https://cdn.jsdelivr.net/npm/[email protected]/dist/vuetify.min.js"></script>

<div id="app">
  <v-app>
      <v-container bg fill-height grid-list-md text-xs-center>
        <v-layout row wrap align-center>
          <v-flex>
            Hello I am center to vertically using "align-center".
          </v-flex>
        </v-layout>
      </v-container>
  </v-app>
</div>

If I understood you right, you want to copy $var in a file (if it's a string).

echo $var > $destdir

Jeffrey Richter on TechEd 2005:

"I have come to learn over the years the C# compiler is basically a liar to me." .. "It lies about many things." .. "Like when you do a foreach loop..." .. "...that is one little line of code that you write, but what the C# compiler spits out in order to do that it's phenomenal. It puts out a try/finally block in there, inside the finally block it casts your variable to an IDisposable interface, and if the cast suceeds it calls the Dispose method on it, inside the loop it calls the Current property and the MoveNext method repeatedly inside the loop, objects are being created underneath the covers. A lot of people use foreach because it's very easy coding, very easy to do.." .. "foreach is not very good in terms of performance, if you iterated over a collection instead by using square bracket notation, just doing index, that's just much faster, and it doesn't create any objects on the heap..."

On-Demand Webcast: http://msevents.microsoft.com/CUI/WebCastEventDetails.aspx?EventID=1032292286&EventCategory=3&culture=en-US&CountryCode=US

In here you can save the phone number as international formatted phone number

internationalFormatPhoneNumber = phoneUtil.format(givenPhoneNumber, PhoneNumberFormat.INTERNATIONAL);

it return the phone number as International format +94 71 560 4888

so now I have get country code as this

String countryCode = internationalFormatPhoneNumber.substring(0,internationalFormatPhoneNumber.indexOf('')).replace('+', ' ').trim();

Hope this will help you

Try with below logic

driver.get("http://www.labmultis.info/jpecka.portal-exdrazby/index.php?c1=2&a=s&aa=&ta=1");

List<WebElement> allElements=driver.findElements(By.cssSelector(".list.list-categories li"));

for(WebElement ele :allElements) {
    System.out.println("Name + Number===>"+ele.getText());
    String s=ele.getText();
    s=s.substring(s.indexOf("(")+1, s.indexOf(")"));
    System.out.println("Number==>"+s);
}

====Output======
Name + Number===>Vše (950)
Number==>950
Name + Number===>Byty (181)
Number==>181
Name + Number===>Domy (512)
Number==>512
Name + Number===>Pozemky (172)
Number==>172
Name + Number===>Chaty (28)
Number==>28
Name + Number===>Zemedelské objekty (5)
Number==>5
Name + Number===>Komercní objekty (30)
Number==>30
Name + Number===>Ostatní (22)
Number==>22

I had a post build command that worked just fine before I did an update on VS 2017. It turned out that the SDK tools updated and were under a new path so it couldn't find the tool I was using to sign my assemblies.

This changed from this....

call "%VS140COMNTOOLS%vsvars32"
    "C:\Program Files (x86)\Microsoft SDKs\Windows\v10.0A\bin\NETFX 4.6 Tools\x64\sn.exe" -Ra "$(TargetPath)" "$(ProjectDir)Key.snk"

To This...

"C:\Program Files (x86)\Microsoft SDKs\Windows\v10.0A\bin\NETFX 4.6.1 Tools\x64\sn.exe" -Ra "$(TargetPath)" "$(ProjectDir)Key.snk"

Very subtle but breaking change, so check your paths after an update if you see this error.

Html a tag

Link in html

 <a href="index1.php">page1</a>
 <a href="page2.php">page2</a>

Html in php

echo ' <a href="index1.php">page1</a>';
echo '<a href="page2.php">page2</a>';

you have to call it like this

SELECT dbo.CheckIfSFExists(23, default)

From Technet:

When a parameter of the function has a default value, the keyword DEFAULT must be specified when the function is called in order to retrieve the default value. This behaviour is different from using parameters with default values in stored procedures in which omitting the parameter also implies the default value. An exception to this behaviour is when invoking a scalar function by using the EXECUTE statement. When using EXECUTE, the DEFAULT keyword is not required.

Taken from here.

This is only for division:

int add(int a, int b) {
        int partialSum, carry;
        do {
            partialSum = a ^ b;
            carry = (a & b) << 1;
            a = partialSum;
            b = carry;
        } while (carry != 0);
        return partialSum;
}

int subtract(int a, int b) {
    return add(a, add(~b, 1));
}

int division(int dividend, int divisor) {
        boolean negative = false;
        if ((dividend & (1 << 31)) == (1 << 31)) { // Check for signed bit
            negative = !negative;
            dividend = add(~dividend, 1);  // Negation
        }
        if ((divisor & (1 << 31)) == (1 << 31)) {
            negative = !negative;
            divisor = add(~divisor, 1);  // Negation
        }
        int quotient = 0;
        long r;
        for (int i = 30; i >= 0; i = subtract(i, 1)) {
            r = (divisor << i);
           // Left shift divisor until it's smaller than dividend
            if (r < Integer.MAX_VALUE && r >= 0) { // Avoid cases where comparison between long and int doesn't make sense
                if (r <= dividend) { 
                    quotient |= (1 << i);    
                    dividend = subtract(dividend, (int) r);
                }
            }
        }
        if (negative) {
            quotient = add(~quotient, 1);
        }
        return quotient;
}

If you run php with php-fpm module,do not forget to run command systemctl restart php-fpm!That will reload php-fpm module.

Without examples of the dataset of staging this is a shot in the dark, but have you tried something like this?

update PRODUCTION p,
       staging s
set p.name = s.name  
    p.count = s.count
where p.id = s.id

This would work assuming the id column matches on both tables.

In my case, I used the ssl module to "workaround" the certification like so:

import ssl

ssl._create_default_https_context = ssl._create_unverified_context

Then to read your link content, you can use:

urllib.request.urlopen(urllink)

This can be done using a temporary table.

The idea

• disable constraints (in case your id is referenced by a foreign key)
• create a temp table with the new id
• delete the table content
• copy back data from the copied table to your original table
• enable previsously disabled constraints

SQL Queries

Let's say your test table have two additional columns (column2 and column3) and that there are 2 tables having foreign keys referencing test called foreign_table1 and foreign_table2 (because real life issues are never simple).

alter table test nocheck constraint all;
alter table foreign_table1 nocheck constraint all;
alter table foreign_table2 nocheck constraint all;
set identity_insert test on;

select id + 1 as id, column2, column3 into test_copy from test v;
delete from test;
insert into test(id, column2, column3)
select id, column2, column3 from test_copy

alter table test check constraint all;
alter table foreign_table1 check constraint all;
alter table foreign_table2 check constraint all;
set identity_insert test off;
drop table test_copy;

That's it.

 display: inline-block;
max-width: 80%;
height: 1.5em;
overflow: hidden;
text-overflow: ellipsis;
white-space: nowrap; 

<?php
function createThumbnail($imageDirectory, $imageName, $thumbDirectory, $thumbWidth) {
    $explode = explode(".", $imageName);
    $filetype = $explode[1];

    if ($filetype == 'jpg') {
        $srcImg = imagecreatefromjpeg("$imageDirectory/$imageName");
    } else
    if ($filetype == 'jpeg') {
        $srcImg = imagecreatefromjpeg("$imageDirectory/$imageName");
    } else
    if ($filetype == 'png') {
        $srcImg = imagecreatefrompng("$imageDirectory/$imageName");
    } else
    if ($filetype == 'gif') {
        $srcImg = imagecreatefromgif("$imageDirectory/$imageName");
    }

    $origWidth = imagesx($srcImg);
    $origHeight = imagesy($srcImg);

    $ratio = $origWidth / $thumbWidth;
    $thumbHeight = $origHeight / $ratio;

    $thumbImg = imagecreatetruecolor($thumbWidth, $thumbHeight);
    imagecopyresized($thumbImg, $srcImg, 0, 0, 0, 0, $thumbWidth, $thumbHeight, $origWidth, $origHeight);

    if ($filetype == 'jpg') {
        imagejpeg($thumbImg, "$thumbDirectory/$imageName");
    } else
    if ($filetype == 'jpeg') {
        imagejpeg($thumbImg, "$thumbDirectory/$imageName");
    } else
    if ($filetype == 'png') {
        imagepng($thumbImg, "$thumbDirectory/$imageName");
    } else
    if ($filetype == 'gif') {
        imagegif($thumbImg, "$thumbDirectory/$imageName");
    }
}
    ?>

This is a very good thumbnail script =) Here's an example:

$path = The path to the folder where the original picture is. $name = The filename of the file you want to make a thumbnail of. $thumbpath = The path to the directory where you want the thumbnail to be saved into. $maxwidth = the maximum width of the thumbnail in PX eg. 100 (wich will be 100px).

createThumbnail($path, $name, $thumbpath, $maxwidth);

Am trying to grep pattern from dozen files .tar.gz but its very slow

tar -ztf file.tar.gz | while read FILENAME
do
        if tar -zxf file.tar.gz "$FILENAME" -O | grep "string" > /dev/null
        then
                echo "$FILENAME contains string"
        fi
done

That's actually very easy with ugrep option -z:

-z, --decompress
        Decompress files to search, when compressed.  Archives (.cpio,
        .pax, .tar, and .zip) and compressed archives (e.g. .taz, .tgz,
        .tpz, .tbz, .tbz2, .tb2, .tz2, .tlz, and .txz) are searched and
        matching pathnames of files in archives are output in braces.  If
        -g, -O, -M, or -t is specified, searches files within archives
        whose name matches globs, matches file name extensions, matches
        file signature magic bytes, or matches file types, respectively.
        Supported compression formats: gzip (.gz), compress (.Z), zip,
        bzip2 (requires suffix .bz, .bz2, .bzip2, .tbz, .tbz2, .tb2, .tz2),
        lzma and xz (requires suffix .lzma, .tlz, .xz, .txz).

Which requires just one command to search file.tar.gz as follows:

ugrep -z "string" file.tar.gz

This greps each of the archived files to display matches. Archived filenames are shown in braces to distinguish them from ordinary filenames. For example:

$ ugrep -z "Hello" archive.tgz
{Hello.bat}:echo "Hello World!"
Binary file archive.tgz{Hello.class} matches
{Hello.java}:public class Hello // prints a Hello World! greeting
{Hello.java}:  { System.out.println("Hello World!");
{Hello.pdf}:(Hello)
{Hello.sh}:echo "Hello World!"
{Hello.txt}:Hello

If you just want the file names, use option -l (--files-with-matches) and customize the filename output with option --format="%z%~" to get rid of the braces:

$ ugrep -z Hello -l --format="%z%~" archive.tgz
Hello.bat
Hello.class
Hello.java
Hello.pdf
Hello.sh
Hello.txt

=SUMPRODUCT((A1:A5="FRANCE")*B1:D5)

Here I give you my example which contain --> Country flag, City, State, Country.

Here is my output.

Attach these two Cdn js or links.

<link href="https://cdnjs.cloudflare.com/ajax/libs/select2/4.0.10/css/select2.min.css" rel="stylesheet" />
<script src="https://cdnjs.cloudflare.com/ajax/libs/select2/4.0.10/js/select2.min.js"></script>

js script

//for apend flag of country.

function formatState (state) {
    console.log(state);
    if (!state.id) {
      return state.text;
    }
    var baseUrl = "admin/images/flags";
    var $state = $(
      '<span><img src="'+baseUrl+ '/' + state.contryflage.toLowerCase() + '.png"  class="img-flag" /> ' +state.text+ '</span>'
    );
    return $state;
  };


$(function(){
    $("#itemSearch").select2({
    minimumInputLength: 2,
    templateResult: formatState, //this is for append country flag.
    ajax: {
        url: URL,
        dataType: 'json',
        type: "POST",
        data: function (term) {
            return {
                term: term
            };
        },
        processResults: function (data) {
            return {
                results: $.map(data, function (item) {
                    return {
                        text: item.name+', '+item.state.name+', '+item.state.coutry.name,
                        id: item.id,
                        contryflage:item.state.coutry.sortname
                    }
                })
            };
        }

    }
});

Expected JSON response.

[
   {
      "id":7570,
      "name":"Brussels",
      "state":{
         "name":"Brabant",
         "coutry":{
            "sortname":"BE",
            "name":"Belgium",

         }
      }
   },
   {
      "id":7575,
      "name":"Brussels",
      "state":{
         "name":"Brabant Wallon",
         "coutry":{
            "sortname":"BE",
            "name":"Belgium",

         }
      }
   },
   {
      "id":7578,
      "name":"Brussel",
      "state":{
         "name":"Brussel",
         "coutry":{
            "sortname":"BE",
            "name":"Belgium",

         }
      }
   },

]

No, not exactly. But it can inherit from a class and implement one or more interfaces.

Clear terminology is important when discussing concepts like this. One of the things that you'll see mark out Jon Skeet's writing, for example, both here and in print, is that he is always precise in the way he decribes things.

If no other process is using the port 8080, Eventhough eclipse shows the port 8080 is used while starting the server in eclipse, first you have to stop the server by hitting the stop button in "Configure Tomcat"(which you can find in your start menu under tomcat folder), then try to start the server in eclipse then it will be started.

If any other process is using the port 8080 and as well as you no need to disturb it. then you can change the port.

I had a ClassNotFoundException pointing to my Application class.

I found that I missed Java builder in my .project

If something is missing in your buildSpec, close Eclipse, make sure everything is in place and start Eclipse again

        <buildSpec>
            <buildCommand>
                    <name>com.android.ide.eclipse.adt.ResourceManagerBuilder</name>
                    <arguments>
                    </arguments>
            </buildCommand>
            <buildCommand>
                    <name>com.android.ide.eclipse.adt.PreCompilerBuilder</name>
                    <arguments>
                    </arguments>
            </buildCommand>
            <buildCommand>
                    <name>org.eclipse.jdt.core.javabuilder</name>
                    <arguments>
                    </arguments>
            </buildCommand>
            <buildCommand>
                    <name>com.android.ide.eclipse.adt.ApkBuilder</name>
                    <arguments>
                    </arguments>
            </buildCommand>
    </buildSpec>

Try this

Console.WriteLine(GetDomain.GetDomainFromUrl("http://support.domain.com/default.aspx?id=12345"));

It will output support.domain.com

Or try

Uri.GetLeftPart( UriPartial.Authority )

Although an old question, here is another (imho the cleanest and best) solution as all the previous answeres didn't work for me since I deeplinked Activity B from a Widget.

public void navigateUp() {
final Intent upIntent = NavUtils.getParentActivityIntent(this);
if (NavUtils.shouldUpRecreateTask(this, upIntent) || isTaskRoot()) {
    Log.v(logTag, "Recreate back stack");
        TaskStackBuilder.create(this).addNextIntentWithParentStack(upIntent).startActivities();
  } else {
    NavUtils.navigateUpTo(this, upIntent);
  }
}

[https://stackoverflow.com/a/31350642/570168 ]

But also see: https://speakerdeck.com/jgilfelt/this-way-up-implementing-effective-navigation-on-android

A message has a header part and a message body separated by a blank line. The blank line is ALWAYS needed even if there is no message body. The header starts with a command and has additional lines of key value pairs separated by a colon and a space. If there is a message body, it can be anything you want it to be.

Lines in the header and the blank line at the end of the header must end with a carraige return and linefeed pair (see HTTP header line break style) so that's why those lines have \r\n at the end.

A URL has the form of http://host:port/path?query_string

There are two main ways of submitting a request to a website:

• GET: The query string is optional but, if specified, must be reasonably short. Because of this the header could just be the GET command and nothing else. A sample message could be:

  GET /path?query_string HTTP/1.0\r\n
  \r\n
  

• POST: What would normally be in the query string is in the body of the message instead. Because of this the header needs to include the Content-Type: and Content-Length: attributes as well as the POST command. A sample message could be:

  POST /path HTTP/1.0\r\n
  Content-Type: text/plain\r\n
  Content-Length: 12\r\n
  \r\n
  query_string
  

So, to answer your question: if the URL you are interested in POSTing to is http://api.somesite.com/apikey=ARG1&command=ARG2 then there is no body or query string and, consequently, no reason to POST because there is nothing to put in the body of the message and so nothing to put in the Content-Type: and Content-Length:

I guess you could POST if you really wanted to. In that case your message would look like:

POST /apikey=ARG1&command=ARG2 HTTP/1.0\r\n
\r\n

So to send the message the C program needs to:

• create a socket
• lookup the IP address
• open the socket
• send the request
• wait for the response
• close the socket

The send and receive calls won't necessarily send/receive ALL the data you give them - they will return the number of bytes actually sent/received. It is up to you to call them in a loop and send/receive the remainder of the message.

What I did not do in this sample is any sort of real error checking - when something fails I just exit the program. Let me know if it works for you:

#include <stdio.h> /* printf, sprintf */
#include <stdlib.h> /* exit */
#include <unistd.h> /* read, write, close */
#include <string.h> /* memcpy, memset */
#include <sys/socket.h> /* socket, connect */
#include <netinet/in.h> /* struct sockaddr_in, struct sockaddr */
#include <netdb.h> /* struct hostent, gethostbyname */

void error(const char *msg) { perror(msg); exit(0); }

int main(int argc,char *argv[])
{
    /* first what are we going to send and where are we going to send it? */
    int portno =        80;
    char *host =        "api.somesite.com";
    char *message_fmt = "POST /apikey=%s&command=%s HTTP/1.0\r\n\r\n";

    struct hostent *server;
    struct sockaddr_in serv_addr;
    int sockfd, bytes, sent, received, total;
    char message[1024],response[4096];

    if (argc < 3) { puts("Parameters: <apikey> <command>"); exit(0); }

    /* fill in the parameters */
    sprintf(message,message_fmt,argv[1],argv[2]);
    printf("Request:\n%s\n",message);

    /* create the socket */
    sockfd = socket(AF_INET, SOCK_STREAM, 0);
    if (sockfd < 0) error("ERROR opening socket");

    /* lookup the ip address */
    server = gethostbyname(host);
    if (server == NULL) error("ERROR, no such host");

    /* fill in the structure */
    memset(&serv_addr,0,sizeof(serv_addr));
    serv_addr.sin_family = AF_INET;
    serv_addr.sin_port = htons(portno);
    memcpy(&serv_addr.sin_addr.s_addr,server->h_addr,server->h_length);

    /* connect the socket */
    if (connect(sockfd,(struct sockaddr *)&serv_addr,sizeof(serv_addr)) < 0)
        error("ERROR connecting");

    /* send the request */
    total = strlen(message);
    sent = 0;
    do {
        bytes = write(sockfd,message+sent,total-sent);
        if (bytes < 0)
            error("ERROR writing message to socket");
        if (bytes == 0)
            break;
        sent+=bytes;
    } while (sent < total);

    /* receive the response */
    memset(response,0,sizeof(response));
    total = sizeof(response)-1;
    received = 0;
    do {
        bytes = read(sockfd,response+received,total-received);
        if (bytes < 0)
            error("ERROR reading response from socket");
        if (bytes == 0)
            break;
        received+=bytes;
    } while (received < total);

    if (received == total)
        error("ERROR storing complete response from socket");

    /* close the socket */
    close(sockfd);

    /* process response */
    printf("Response:\n%s\n",response);

    return 0;
}

Like the other answer pointed out, 4096 bytes is not a very big response. I picked that number at random assuming that the response to your request would be short. If it can be big you have two choices:

• read the Content-Length: header from the response and then dynamically allocate enough memory to hold the whole response.
• write the response to a file as the pieces arrive

Additional information to answer the question asked in the comments:

What if you want to POST data in the body of the message? Then you do need to include the Content-Type: and Content-Length: headers. The Content-Length: is the actual length of everything after the blank line that separates the header from the body.

Here is a sample that takes the following command line arguments:

• host
• port
• command (GET or POST)
• path (not including the query data)
• query data (put into the query string for GET and into the body for POST)
• list of headers (Content-Length: is automatic if using POST)

So, for the original question you would run:

a.out api.somesite.com 80 GET "/apikey=ARG1&command=ARG2"

And for the question asked in the comments you would run:

a.out api.somesite.com 80 POST / "name=ARG1&value=ARG2" "Content-Type: application/x-www-form-urlencoded"

Here is the code:

#include <stdio.h> /* printf, sprintf */
#include <stdlib.h> /* exit, atoi, malloc, free */
#include <unistd.h> /* read, write, close */
#include <string.h> /* memcpy, memset */
#include <sys/socket.h> /* socket, connect */
#include <netinet/in.h> /* struct sockaddr_in, struct sockaddr */
#include <netdb.h> /* struct hostent, gethostbyname */

void error(const char *msg) { perror(msg); exit(0); }

int main(int argc,char *argv[])
{
    int i;

    /* first where are we going to send it? */
    int portno = atoi(argv[2])>0?atoi(argv[2]):80;
    char *host = strlen(argv[1])>0?argv[1]:"localhost";

    struct hostent *server;
    struct sockaddr_in serv_addr;
    int sockfd, bytes, sent, received, total, message_size;
    char *message, response[4096];

    if (argc < 5) { puts("Parameters: <host> <port> <method> <path> [<data> [<headers>]]"); exit(0); }

    /* How big is the message? */
    message_size=0;
    if(!strcmp(argv[3],"GET"))
    {
        message_size+=strlen("%s %s%s%s HTTP/1.0\r\n");        /* method         */
        message_size+=strlen(argv[3]);                         /* path           */
        message_size+=strlen(argv[4]);                         /* headers        */
        if(argc>5)
            message_size+=strlen(argv[5]);                     /* query string   */
        for(i=6;i<argc;i++)                                    /* headers        */
            message_size+=strlen(argv[i])+strlen("\r\n");
        message_size+=strlen("\r\n");                          /* blank line     */
    }
    else
    {
        message_size+=strlen("%s %s HTTP/1.0\r\n");
        message_size+=strlen(argv[3]);                         /* method         */
        message_size+=strlen(argv[4]);                         /* path           */
        for(i=6;i<argc;i++)                                    /* headers        */
            message_size+=strlen(argv[i])+strlen("\r\n");
        if(argc>5)
            message_size+=strlen("Content-Length: %d\r\n")+10; /* content length */
        message_size+=strlen("\r\n");                          /* blank line     */
        if(argc>5)
            message_size+=strlen(argv[5]);                     /* body           */
    }

    /* allocate space for the message */
    message=malloc(message_size);

    /* fill in the parameters */
    if(!strcmp(argv[3],"GET"))
    {
        if(argc>5)
            sprintf(message,"%s %s%s%s HTTP/1.0\r\n",
                strlen(argv[3])>0?argv[3]:"GET",               /* method         */
                strlen(argv[4])>0?argv[4]:"/",                 /* path           */
                strlen(argv[5])>0?"?":"",                      /* ?              */
                strlen(argv[5])>0?argv[5]:"");                 /* query string   */
        else
            sprintf(message,"%s %s HTTP/1.0\r\n",
                strlen(argv[3])>0?argv[3]:"GET",               /* method         */
                strlen(argv[4])>0?argv[4]:"/");                /* path           */
        for(i=6;i<argc;i++)                                    /* headers        */
            {strcat(message,argv[i]);strcat(message,"\r\n");}
        strcat(message,"\r\n");                                /* blank line     */
    }
    else
    {
        sprintf(message,"%s %s HTTP/1.0\r\n",
            strlen(argv[3])>0?argv[3]:"POST",                  /* method         */
            strlen(argv[4])>0?argv[4]:"/");                    /* path           */
        for(i=6;i<argc;i++)                                    /* headers        */
            {strcat(message,argv[i]);strcat(message,"\r\n");}
        if(argc>5)
            sprintf(message+strlen(message),"Content-Length: %d\r\n",strlen(argv[5]));
        strcat(message,"\r\n");                                /* blank line     */
        if(argc>5)
            strcat(message,argv[5]);                           /* body           */
    }

    /* What are we going to send? */
    printf("Request:\n%s\n",message);

    /* create the socket */
    sockfd = socket(AF_INET, SOCK_STREAM, 0);
    if (sockfd < 0) error("ERROR opening socket");

    /* lookup the ip address */
    server = gethostbyname(host);
    if (server == NULL) error("ERROR, no such host");

    /* fill in the structure */
    memset(&serv_addr,0,sizeof(serv_addr));
    serv_addr.sin_family = AF_INET;
    serv_addr.sin_port = htons(portno);
    memcpy(&serv_addr.sin_addr.s_addr,server->h_addr,server->h_length);

    /* connect the socket */
    if (connect(sockfd,(struct sockaddr *)&serv_addr,sizeof(serv_addr)) < 0)
        error("ERROR connecting");

    /* send the request */
    total = strlen(message);
    sent = 0;
    do {
        bytes = write(sockfd,message+sent,total-sent);
        if (bytes < 0)
            error("ERROR writing message to socket");
        if (bytes == 0)
            break;
        sent+=bytes;
    } while (sent < total);

    /* receive the response */
    memset(response,0,sizeof(response));
    total = sizeof(response)-1;
    received = 0;
    do {
        bytes = read(sockfd,response+received,total-received);
        if (bytes < 0)
            error("ERROR reading response from socket");
        if (bytes == 0)
            break;
        received+=bytes;
    } while (received < total);

    if (received == total)
        error("ERROR storing complete response from socket");

    /* close the socket */
    close(sockfd);

    /* process response */
    printf("Response:\n%s\n",response);

    free(message);
    return 0;
}

TL:DR
row lock = A$5
column lock = $A5
Both = $A$5

Below are examples of how to use the Excel lock reference $ when creating your formulas

To prevent increments when moving from one row to another put the $ after the column letter and before the row number. e.g. A$5

To prevent increments when moving from one column to another put the $ before the row number. e.g. $A5

To prevent increments when moving from one column to another or from one row to another put the $ before the row number and before the column letter. e.g. $A$5

Using the lock reference will also prevent increments when dragging cells over to duplicate calculations.

Since version 8, Internet Explorer has its own console, like other browsers. However, if the console is not enabled, the console object does not exist and a call to console.log will throw an error.

Another option is to use log4javascript (full disclosure: written by me), which has its own logging console that works in all mainstream browsers, including IE >= 5, plus a wrapper for the browser's own console that avoids the issue of an undefined console.

In Swift 3 you can do this,

let date = Date()
let hour = Calendar.current.component(.hour, from: date)

How about the ole goto statement (i know, i know, but it works just fine here ;)

DECLARE
   v_attr char(88);
CURSOR  SELECT_USERS IS
SELECT id FROM USER_TABLE
WHERE USERTYPE = 'X';
BEGIN
    FOR user_rec IN SELECT_USERS LOOP    
        BEGIN
            SELECT attr INTO v_attr 
            FROM ATTRIBUTE_TABLE
            WHERE user_id = user_rec.id;            
         EXCEPTION
            WHEN NO_DATA_FOUND THEN
               -- user does not have attribute, continue loop to next record.
               goto end_loop;
         END;

        <<end_loop>>
        null;         
    END LOOP;
END;

Just put end_loop at very end of loop of course. The null can be substituted with a commit maybe or a counter increment maybe, up to you.

The following should work as it calculates difference between DATE and UTCDATE for the server you are running and uses that offset to calculate the UTC equivalent of any date you pass to it. In my example, I am trying to convert UTC equivalent for '1-nov-2012 06:00' in Adelaide, Australia where UTC offset is -630 minutes, which when added to any date will result in UTC equivalent of any local date.

select DATEADD(MINUTE, DATEDIFF(MINUTE, GETDATE(), GETUTCDATE()), '1-nov-2012 06:00')

Had the same problem under Linux. By default the animate.save method is using ffmpeg but it seems to be deprecated. https://askubuntu.com/questions/432542/is-ffmpeg-missing-from-the-official-repositories-in-14-04

Solution: Install some coder, like avconv or mencoder. Provide the alternative coder in the call:

ani.save('the_movie.mp4', writer = 'mencoder', fps=15)

You could use the tr instead:

       $p =~ tr/fo//d;

will delete every f and every o from $p. In your case it should be:

       $p =~ tr/\$#@~!&*()[];.,:?^ `\\\///d

See Perl's tr documentation.

tr/SEARCHLIST/REPLACEMENTLIST/cdsr

Transliterates all occurrences of the characters found (or not found if the /c modifier is specified) in the search list with the positionally corresponding character in the replacement list, possibly deleting some, depending on the modifiers specified.

[…]

If the /d modifier is specified, any characters specified by SEARCHLIST not found in REPLACEMENTLIST are deleted.

Safer is to use lift so you can extract the value if it exists and fail gracefully if it does not.

data.lift(2)

This will return None if the list isn't long enough to provide that element, and Some(value) if it is.

scala> val l = List("a", "b", "c")
scala> l.lift(1)
Some("b")
scala> l.lift(5)
None

Whenever you're performing an operation that may fail in this way it's great to use an Option and get the type system to help make sure you are handling the case where the element doesn't exist.

Explanation:

This works because List's apply (which sugars to just parentheses, e.g. l(index)) is like a partial function that is defined wherever the list has an element. The List.lift method turns the partial apply function (a function that is only defined for some inputs) into a normal function (defined for any input) by basically wrapping the result in an Option.

.val() does not return an array from a DOM element: $('#fruit') is going to find the element in the document with an ID of #fruit and get its value (if it has a value).

If you know that your floating point format is IEEE 754 (almost all modern CPUs including Intel and ARM) then you can build a random floating point number from a random integer using bit-wise methods. This should only be considered if you do not have access to C++11's random or Boost.Random which are both much better.

float rand_float()
{
    // returns a random value in the range [0.0-1.0)

    // start with a bit pattern equating to 1.0
    uint32_t pattern = 0x3f800000;

    // get 23 bits of random integer
    uint32_t random23 = 0x7fffff & (rand() << 8 ^ rand());

    // replace the mantissa, resulting in a number [1.0-2.0)
    pattern |= random23;

    // convert from int to float without undefined behavior
    assert(sizeof(float) == sizeof(uint32_t));
    char buffer[sizeof(float)];
    memcpy(buffer, &pattern, sizeof(float));
    float f;
    memcpy(&f, buffer, sizeof(float));

    return f - 1.0;
}

This will give a better distribution than one using division.

This type of behavior is not supported in Java. However, if you have a large project that needs this, consider blending in Groovy code in your project. Groovy code is compiled into byte code and can be run with JVM. The company I work for uses Groovy to write service classes and Java to write everything else.

All containers offer a reversed view of their content with rbegin() and rend(). These two functions return so-calles reverse iterators, which can be used like normal ones, but it will look like the container is actually reversed.

#include <vector>
#include <iostream>

template<class InIt>
void print_range(InIt first, InIt last, char const* delim = "\n"){
  --last;
  for(; first != last; ++first){
    std::cout << *first << delim;
  }
  std::cout << *first;
}

int main(){
  int a[] = { 1, 2, 3, 4, 5 };
  std::vector<int> v(a, a+5);
  print_range(v.begin(), v.end(), "->");
  std::cout << "\n=============\n";
  print_range(v.rbegin(), v.rend(), "<-");
}

Live example on Ideone. Output:

1->2->3->4->5
=============
5<-4<-3<-2<-1

<%=%> by itself will be sent to the output, in the context of the JSTL it will be evaluated to a string

For those who wants to have readable timestamp in format of, yyyymmddHHMMSS

> (new Date()).toISOString().replace(/[^\d]/g,'')              // "20190220044724404"
> (new Date()).toISOString().replace(/[^\d]/g,'').slice(0, -3) // "20190220044724"
> (new Date()).toISOString().replace(/[^\d]/g,'').slice(0, -9) // "20190220"

Usage example: a backup file extension. /my/path/my.file.js.20190220

Png files can handle transparency. So you could use this question Save plot to image file instead of displaying it using Matplotlib so as to save you graph as a png file.

And if you want to turn all white pixel transparent, there's this other question : Using PIL to make all white pixels transparent?

If you want to turn an entire area to transparent, then there's this question: And then use the PIL library like in this question Python PIL: how to make area transparent in PNG? so as to make your graph transparent.

You can consider to replace default WordPress jQuery script with Google Library by adding something like the following into theme functions.php file:

function modify_jquery() {
    if (!is_admin()) {
        wp_deregister_script('jquery');
        wp_register_script('jquery', 'http://ajax.googleapis.com/ajax/libs/jquery/1.10.2/jquery.min.js', false, '1.10.2');
        wp_enqueue_script('jquery');
    }
}
add_action('init', 'modify_jquery');

Code taken from here: http://www.wpbeginner.com/wp-themes/replace-default-wordpress-jquery-script-with-google-library/

You can't directly manipulate a session value from Javascript - they only exist on the server.

You could let your Javascript get and set values in the session by using AJAX calls though.

See also

• Javascript and session variables
• jQuery click event to change php session variable

Reading a CSV file in very simple and common in Java. You actually don't require to load any extra third party library to do this for you. CSV (comma separated value) file is just a normal plain-text file, store data in column by column, and split it by a separator (e.g comma ",").

In order to read specific columns from the CSV file, there are several ways. Simplest of all is as below:

Code to read CSV without any 3rd party library

BufferedReader br = new BufferedReader(new FileReader(csvFile));
while ((line = br.readLine()) != null) {
    // use comma as separator
    String[] cols = line.split(cvsSplitBy);
    System.out.println("Coulmn 4= " + cols[4] + " , Column 5=" + cols[5]);
}

If you notice, nothing special is performed here. It is just reading a text file, and spitting it by a separator – ",".

Consider an extract from legacy country CSV data at GeoLite Free Downloadable Databases

"1.0.0.0","1.0.0.255","16777216","16777471","AU","Australia"
"1.0.1.0","1.0.3.255","16777472","16778239","CN","China"
"1.0.4.0","1.0.7.255","16778240","16779263","AU","Australia"
"1.0.8.0","1.0.15.255","16779264","16781311","CN","China"
"1.0.16.0","1.0.31.255","16781312","16785407","JP","Japan"
"1.0.32.0","1.0.63.255","16785408","16793599","CN","China"
"1.0.64.0","1.0.127.255","16793600","16809983","JP","Japan"
"1.0.128.0","1.0.255.255","16809984","16842751","TH","Thailand"

Above code will output as below:

Column 4= "AU" , Column 5="Australia"
Column 4= "CN" , Column 5="China"
Column 4= "AU" , Column 5="Australia"
Column 4= "CN" , Column 5="China"
Column 4= "JP" , Column 5="Japan"
Column 4= "CN" , Column 5="China"
Column 4= "JP" , Column 5="Japan"
Column 4= "TH" , Column 5="Thailand"

You can, in fact, put the columns in a Map and then get the values simply by using the key.

Shishir

A big difference is if you are displaying arrays. Especially ones with NIL. For example:

print [nil, 1, 2]

gives

[nil, 1, 2]

but

puts [nil, 1, 2]

gives

1
2

Note, no appearing nil item (just a blank line) and each item on a different line.

You can check if there is a value, and if the image is valid by doing the following:

if(empty($_FILES['cover_image']['tmp_name']) || !is_uploaded_file($_FILES['cover_image']['tmp_name']))
{
   // Handle no image here...
}

You can use with :

with(df, data.frame(A, B, E))

If you are on mac, Use rvm to install your specific version of ruby. See https://owanateamachree.medium.com/how-to-install-ruby-using-ruby-version-manager-rvm-on-macos-mojave-ab53f6d8d4ec

Make sure you follow all the steps. This worked for me.

As @Misha Moroshko has already posted himself, this works:

$("#mainTable").css("width", 100);
$("#mainTable").css("height", 200);

There's some advantage to this technique over @Nick Craver's accepted answer - you can also specifiy different units:

$("#mainTable").css("width", "100%");

So @Nick Craver's method might actually be the wrong choice for some users. From the jquery API (http://api.jquery.com/width/):

The difference between .css(width) and .width() is that the latter returns a unit-less pixel value (for example, 400) while the former returns a value with units intact (for example, 400px). The .width() method is recommended when an element's width needs to be used in a mathematical calculation.

If the value stored in PropertyLoader.RET_SECONDARY_V_ARRAY is not "V_ARRAY", then you are using different types; even if they are declared identically (e.g. both are table of number) this will not work.

You're hitting this data type compatibility restriction:

You can assign a collection to a collection variable only if they have the same data type. Having the same element type is not enough.

You're trying to call the procedure with a parameter that is a different type to the one it's expecting, which is what the error message is telling you.

In Visual C++ the project options under, Output Files I believe has an option for outputing the ASM listing with source code. So you will see the C/C++ source code and the resulting ASM all in the same file.

I'm trying to understand monads as well. It's my version:

Monads are about making abstractions about repetitive things. Firstly, monad itself is a typed interface (like an abstract generic class), that has two functions: bind and return that have defined signatures. And then, we can create concrete monads based on that abstract monad, of course with specific implementations of bind and return. Additionally, bind and return must fulfill a few invariants in order to make it possible to compose/chain concrete monads.

Why create the monad concept while we have interfaces, types, classes and other tools to create abstractions? Because monads give more: they enforce rethinking problems in a way that enables to compose data without any boilerplate.

Will work for 100% sure. I had the same issue but its solved by below steps:

1. Delete all profiles from: ~/Library/MobileDevice/Provisioning Profiles/
2. Delete developer account from Xcode >> Preference >> Account >> Delete your Apple Id
3. Delete derived data
4. Restart machine
5. Download your provisioning profiles which you require to submit app
6. Open your project and clean it
7. And try again for submit app.

I hope this will work for all.

As mentioned in the comments, the Starting Guide is the place to start with Java 11 and JavaFX 11.

The key to work as you did before Java 11 is to understand that:

• JavaFX 11 is not part of the JDK anymore
• You can get it in different flavors, either as an SDK or as regular dependencies (maven/gradle).
• You will need to include it to the module path of your project, even if your project is not modular.

JavaFX project

If you create a regular JavaFX default project in IntelliJ (without Maven or Gradle) I'd suggest you download the SDK from here. Note that there are jmods as well, but for a non modular project the SDK is preferred.

These are the easy steps to run the default project:

1. Create a JavaFX project
2. Set JDK 11 (point to your local Java 11 version)
3. Add the JavaFX 11 SDK as a library. The URL could be something like /Users/<user>/Downloads/javafx-sdk-11/lib/. Once you do this you will notice that the JavaFX classes are now recognized in the editor.

4. Before you run the default project, you just need to add these to the VM options:

   --module-path /Users/<user>/Downloads/javafx-sdk-11/lib --add-modules=javafx.controls,javafx.fxml

5. Run

Maven

If you use Maven to build your project, follow these steps:

1. Create a Maven project with JavaFX archetype
2. Set JDK 11 (point to your local Java 11 version)

3. Add the JavaFX 11 dependencies.

   <dependencies>
       <dependency>
           <groupId>org.openjfx</groupId>
           <artifactId>javafx-controls</artifactId>
           <version>11</version>
       </dependency>
       <dependency>
           <groupId>org.openjfx</groupId>
           <artifactId>javafx-fxml</artifactId>
           <version>11</version>
       </dependency>
   </dependencies>
   

Once you do this you will notice that the JavaFX classes are now recognized in the editor.

You will notice that Maven manages the required dependencies for you: it will add javafx.base and javafx.graphics for javafx.controls, but most important, it will add the required classifier based on your platform. In my case, Mac.

This is why your jars org.openjfx:javafx-controls:11 are empty, because there are three possible classifiers (windows, linux and mac platforms), that contain all the classes and the native implementation.

In case you still want to go to your .m2 repo and take the dependencies from there manually, make sure you pick the right one (for instance .m2/repository/org/openjfx/javafx-controls/11/javafx-controls-11-mac.jar)

4. Replace default maven plugins with those from here.

5. Run mvn compile javafx:run, and it should work.

Similar works as well for Gradle projects, as explained in detail here.

EDIT

The mentioned Getting Started guide contains updated documentation and sample projects for IntelliJ:

• JavaFX 11 without Maven/Gradle, see non-modular sample or modular sample projects.

• JavaFX 11 with Maven, see non-modular sample or modular sample projects.

• JavaFX 11 with Gradle, see non-modular sample or modular sample projects.

Using "focus" will give keyboard users the same effect that mouse users get when they hover with a mouse. "Active" is needed to get the same effect in Internet Explorer.

The reality is, these states do not work as they should for all users. Not using all three selectors creates accessibility issues for many keyboard-only users who are physically unable to use a mouse. I invite you to take the #nomouse challenge (nomouse dot org).

If you want to store a python dict in redis, it is better to store it as json string.

import redis

r = redis.StrictRedis(host='localhost', port=6379, db=0)
mydict = { 'var1' : 5, 'var2' : 9, 'var3': [1, 5, 9] }
rval = json.dumps(mydict)
r.set('key1', rval)

While retrieving de-serialize it using json.loads

data = r.get('key1')
result = json.loads(data)
arr = result['var3']

What about types (eg.bytes) that are not serialized by json functions ?

You can write encoder/decoder functions for types that cannot be serialized by json functions. eg. writing base64/ascii encoder/decoder function for byte array.

Ok, here is a fetch DELETE example too:

fetch('https://example.com/delete-item/' + id, {
  method: 'DELETE',
})
.then(res => res.text()) // or res.json()
.then(res => console.log(res))

For anaconda installation, first pick a channel which has the latest version of tensorflow binary. Usually, the latest versions are available at the channel conda-forge. Then simply do:

conda update -f -c conda-forge tensorflow

This will upgrade your existing tensorflow installation to the very latest version available. As of this writing, the latest version is 1.4.0-py36_0

Try jQuery.map function, works pretty well with maps.

var mapArray = {_x000D_
  "lastName": "Last Name cannot be null!",_x000D_
  "email": "Email cannot be null!",_x000D_
  "firstName": "First Name cannot be null!"_x000D_
};_x000D_
_x000D_
$.map(mapArray, function(val, key) {_x000D_
  alert("Value is :" + val);_x000D_
  alert("key is :" + key);_x000D_
});

<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>

Swift versions for the checked response :

Swift 4 :

let view = UIView()
view.frame = UIApplication.shared.keyWindow!.frame
UIApplication.shared.keyWindow!.addSubview(view)

Swift 3.1 :

let view = UIView()
view.frame = UIApplication.sharedApplication().keyWindow!.frame 
UIApplication.sharedApplication().keyWindow!.addSubview(view)

A better alternative is provided in ES6 using Sets. So, instead of declaring Arrays, it is recommended to use Sets if you need to have an array that shouldn't add duplicates.

var array = new Set();
array.add(1);
array.add(2);
array.add(3);

console.log(array);
// Prints: Set(3) {1, 2, 3}

array.add(2); // does not add any new element

console.log(array);
// Still Prints: Set(3) {1, 2, 3}

Answer to use "/I" is working but with little trick - in target you must end with character \ to tell xcopy that target is directory and not file!

Example:

xcopy "$(TargetDir)$(TargetName).dll" "$(SolutionDir)_DropFolder" /F /R /Y /I

does not work and return code 2, but this one:

xcopy "$(TargetDir)$(TargetName).dll" "$(SolutionDir)_DropFolder\" /F /R /Y /I

Command line arguments used in my sample:

/F - Displays full source & target file names

/R - This will overwrite read-only files

/Y - Suppresses prompting to overwrite an existing file(s)

/I - Assumes that destination is directory (but must ends with \)

$_SERVER['REQUEST_URI']

For more details on what info is available in the $_SERVER array, see the PHP manual page for it.

If you also need the query string (the bit after the ? in a URL), that part is in this variable:

$_SERVER['QUERY_STRING']

In short, use:

list - if you require an ordered sequence of items.

dict - if you require to relate values with keys

set - if you require to keep unique elements.

Detailed Explanation

List

A list is a mutable sequence, typically used to store collections of homogeneous items.

A list implements all of the common sequence operations:

• x in l and x not in l
• l[i], l[i:j], l[i:j:k]
• len(l), min(l), max(l)
• l.count(x)
• l.index(x[, i[, j]]) - index of the 1st occurrence of x in l (at or after i and before j indeces)

A list also implements all of the mutable sequence operations:

• l[i] = x - item i of l is replaced by x
• l[i:j] = t - slice of l from i to j is replaced by the contents of the iterable t
• del l[i:j] - same as l[i:j] = []
• l[i:j:k] = t - the elements of l[i:j:k] are replaced by those of t
• del l[i:j:k] - removes the elements of s[i:j:k] from the list
• l.append(x) - appends x to the end of the sequence
• l.clear() - removes all items from l (same as del l[:])
• l.copy() - creates a shallow copy of l (same as l[:])
• l.extend(t) or l += t - extends l with the contents of t
• l *= n - updates l with its contents repeated n times
• l.insert(i, x) - inserts x into l at the index given by i
• l.pop([i]) - retrieves the item at i and also removes it from l
• l.remove(x) - remove the first item from l where l[i] is equal to x
• l.reverse() - reverses the items of l in place

A list could be used as stack by taking advantage of the methods append and pop.

Dictionary

A dictionary maps hashable values to arbitrary objects. A dictionary is a mutable object. The main operations on a dictionary are storing a value with some key and extracting the value given the key.

In a dictionary, you cannot use as keys values that are not hashable, that is, values containing lists, dictionaries or other mutable types.

Set

A set is an unordered collection of distinct hashable objects. A set is commonly used to include membership testing, removing duplicates from a sequence, and computing mathematical operations such as intersection, union, difference, and symmetric difference.

So much code here, but I think this is the best answer

function resize() {
            var input = $("#picture");
            var maxWidth = 300;
            var maxHeight = 300;
            var width = input.width();
            var height = input.height();
            var ratioX = (maxWidth / width);
            var ratioY = (maxHeight / height);
            var ratio = Math.min(ratioX, ratioY);

            var newWidth  = (width * ratio);
            var newHeight = (height * ratio);
            input.css("width", newWidth);
            input.css("height", newHeight);
};

You can set the constraints on that table / column to not check temporarily, then re-enable the constraints. General form would be:

ALTER TABLE TableName NOCHECK CONSTRAINT ConstraintName

Then re-enable all constraints with

ALTER TABLE TableName CHECK CONSTRAINT ConstraintName

I assume that this would be temporary though? You obviously wouldn't want to do this consistently.

if your port number can be random you can use random function in your application.properties server.port=${random.int(4)}

The below code is working,

<style>
    .PanelFloat {
        position: fixed;
        overflow: hidden;
        z-index: 2400;
        opacity: 0.70;
        right: 30px;
        top: 0px !important;
        -webkit-transition: all 0.5s ease-in-out;
        -moz-transition: all 0.5s ease-in-out;
        -ms-transition: all 0.5s ease-in-out;
        -o-transition: all 0.5s ease-in-out;
        transition: all 0.5s ease-in-out;
    }
</style>

<script>
 //The below script will keep the panel float on normal state
 $(function () {
        $(document).on('scroll', function () {
            //Multiplication value shall be changed based on user window
            $('#MyFloatPanel').css('top', 4 * ($(window).scrollTop() / 5));
        });
    });
 //To make the panel float over a bootstrap model which has z-index: 2300, so i specified custom value as 2400
 $(document).on('click', '.btnSearchView', function () {
      $('#MyFloatPanel').addClass('PanelFloat');
  });

  $(document).on('click', '.btnSearchClose', function () {
      $('#MyFloatPanel').removeClass('PanelFloat');
  });
 </script>

 <div class="col-lg-12 col-md-12">
   <div class="col-lg-8 col-md-8" >
    //My scrollable content is here
   </div>
   //This below panel will float while scrolling the above div content
   <div class="col-lg-4 col-md-4" id="MyFloatPanel">
    <div class="row">
     <div class="panel panel-default">
      <div class="panel-heading">Panel Head </div>
     <div class="panel-body ">//Your panel content</div>
   </div>
  </div>
 </div>
</div>

For above query apply below css for a

animation-iteration-count: 1

If your server is running behind a proxy server, make sure your proxy header is set:

proxy_set_header X-Forwarded-Proto  $scheme;

Then to get the right scheme & url you can use springframework's classes:

public String getUrl(HttpServletRequest request) {
    HttpRequest httpRequest = new ServletServerHttpRequest(request);
    UriComponents uriComponents = UriComponentsBuilder.fromHttpRequest(httpRequest).build();

    String scheme = uriComponents.getScheme();             // http / https
    String serverName = request.getServerName();     // hostname.com
    int serverPort = request.getServerPort();        // 80
    String contextPath = request.getContextPath();   // /app

    // Reconstruct original requesting URL
    StringBuilder url = new StringBuilder();
    url.append(scheme).append("://");
    url.append(serverName);

    if (serverPort != 80 && serverPort != 443) {
        url.append(":").append(serverPort);
    }
    url.append(contextPath);
    return url.toString();
}

Suggestions:

• Don't use Canvas as you shouldn't mix AWT with Swing components unnecessarily.
• Instead use a JPanel or JComponent.
• Don't get your Graphics object by calling getGraphics() on a component as the Graphics object obtained will be transient.
• Draw in the JPanel's paintComponent() method.
• All this is well explained in several tutorials that are easily found. Why not read them first before trying to guess at this stuff?

Key tutorial links:

• Basic Tutorial: Lesson: Performing Custom Painting
• More advanced information: Painting in AWT and Swing

mm stands for "minutes". Use MM instead:

SimpleDateFormat sdf1 = new SimpleDateFormat("dd-MM-yyyy");

EDIT: This is not working with latest version of 63.0+

I was able to disable it using help from one of above comments, go to

chrome://flags/#enable-webfonts-intervention-v2

The trick is to also disable the "Trigger User Agent Intervention for WebFonts loading always" option just below that as well.

Here is a Slide Animation for you.

Let's say you have two activities.

1. MovieDetailActivity
2. AllCastActivity

And on click of a Button, this happens.

You can achieve this in 3 simple steps

1) Enable Content Transition

Go to your style.xml and add this line to enable the content transition.

<item name="android:windowContentTransitions">true</item>

2) Write Default Enter and Exit Transition for your AllCastActivity

public void setAnimation()
{
    if(Build.VERSION.SDK_INT>20) {
        Slide slide = new Slide();
        slide.setSlideEdge(Gravity.LEFT);
        slide.setDuration(400);
        slide.setInterpolator(new AccelerateDecelerateInterpolator());
        getWindow().setExitTransition(slide);
        getWindow().setEnterTransition(slide);
    }
}

3) Start Activity with Intent

Write this method in Your MovieDetailActivity to start AllCastActivity

public void startActivity(){

Intent i = new Intent(FirstActivity.this, SecondActivity.class);
i.putStringArrayListExtra(MOVIE_LIST, movie.getImages());

  if(Build.VERSION.SDK_INT>20)
   {
       ActivityOptions options = ActivityOptions.makeSceneTransitionAnimation(BlankActivity.this);
       startActivity(i,options.toBundle());
   }
   else {
       startActivity(i);
   }
}

Most important!

put your setAnimation()method before setContentView() method otherwise the animation will not work.
So your AllCastActivity.javashould look like this

 class AllCastActivity extends AppcompatActivity {

   @Override
   protected void onCreate(Bundle savedInstaceState)
   {
      super.onCreate(savedInstaceState);

      setAnimation();

      setContentView(R.layout.all_cast_activity);

      .......
   }

   private void setAnimation(){

      if(Build.VERSION.SDK_INT>20) {
      Slide slide = new Slide();
      slide.setSlideEdge(Gravity.LEFT);
      ..........
  }
}

Here is the best way to use radio buttons in Angular2. There is no need to use the (click) event or a RadioControlValueAccessor to change the binded property value, setting [checked] property does the trick.

<input name="options" type="radio" [(ngModel)]="model.options" [value]="1"
       [checked]="model.options==1" /><br/>
<input name="options" type="radio"  [(ngModel)]="model.options" [value]="2"
       [checked]="model.options==2" /><br/>

I published an example of using radio buttons: Angular 2: how to create radio buttons from enum and add two-way binding? It works from at least Angular 2 RC5.

Change the last line to

q + theme(axis.text.x = element_text(angle = 90, vjust = 0.5, hjust=1))

By default, the axes are aligned at the center of the text, even when rotated. When you rotate +/- 90 degrees, you usually want it to be aligned at the edge instead:

The image above is from this blog post.

The order of execution is:

1. A's constructor
2. B's constructor

The assignment occurs in B's constructor after A's constructor—_super—has been called:

function B() {
    _super.apply(this, arguments);   // MyvirtualMethod called in here
    this.testString = "Test String"; // testString assigned here
}

So the following happens:

var b = new B();     // undefined
b.MyvirtualMethod(); // "Test String"

You will need to change your code to deal with this. For example, by calling this.MyvirtualMethod() in B's constructor, by creating a factory method to create the object and then execute the function, or by passing the string into A's constructor and working that out somehow... there's lots of possibilities.

Import: import java.util.Scanner;

Define your variables: String name; int age;

Define your scanner: Scanner scan = new Scanner(System.in);

If you want to type:

• Text: name = scan.nextLine();
• Integer: age = scan.nextInt();

Close scanner if no longer needed: scan.close();

If you don't want to add any code to the form (as mentioned in the comments to @shadfc's Answer), it is certainly possible, here are two options.

First, you just reference the fields individually in the HTML, rather than the entire form at once:

<form action="" method="post">
    <ul class="contactList">
        <li id="subject" class="contact">{{ form.subject }}</li>
        <li id="email" class="contact">{{ form.email }}</li>
        <li id="message" class="contact">{{ form.message }}</li>
    </ul>
    <input type="submit" value="Submit">
</form>

(Note that I also changed it to a unsorted list.)

Second, note in the docs on outputting forms as HTML, Django:

The Field id, is generated by prepending 'id_' to the Field name. The id attributes and tags are included in the output by default.

All of your form fields already have a unique id. So you would reference id_subject in your CSS file to style the subject field. I should note, this is how the form behaves when you take the default HTML, which requires just printing the form, not the individual fields:

<ul class="contactList">
    {{ form }}  # Will auto-generate HTML with id_subject, id_email, email_message 
    {{ form.as_ul }} # might also work, haven't tested
</ul>

See the previous link for other options when outputting forms (you can do tables, etc).

Note - I realize this isn't the same as adding a class to each element (if you added a field to the Form, you'd need to update the CSS also) - but it's easy enough to reference all of the fields by id in your CSS like this:

#id_subject, #id_email, #email_message 
{color: red;}

You can't do it. But you can use custom Alert and Confirm boxes.

You can read about some User Interface libraries here:

http://speckyboy.com/2010/05/17/15-javascript-web-ui-libraries-frameworks-and-libraries/

Most common libraries are:

• http://jqueryui.com/
• http://mootools.net/
• http://www.prototype-ui.com/
• http://script.aculo.us/
• http://developer.yahoo.com/yui/

Use dataType casting. For example:

// converting from double to float:
double someValue;
// cast someValue to float!
float newValue = (float)someValue;

Cheers!

Note:

Integers are whole numbers, e.g. 10, 400, or -5.

Floating point numbers (floats) have decimal points and decimal places, for example 12.5, and 56.7786543.

Doubles are a specific type of floating point number that have greater precision than standard floating point numbers (meaning that they are accurate to a greater number of decimal places).

U can do it easier than this answers :

Uri Selected_Image_Uri = data.getData();
ImageView imageView = (ImageView) findViewById(R.id.loadedimg);
imageView.setImageURI(Selected_Image_Uri);

Using pure bash :

$ cat file.txt
US/Central - 10:26 PM (CST)
$ while read a b time x; do [[ $b == - ]] && echo $time; done < file.txt

another solution with bash regex :

$ [[ "US/Central - 10:26 PM (CST)" =~ -[[:space:]]*([0-9]{2}:[0-9]{2}) ]] &&
    echo ${BASH_REMATCH[1]}

another solution using grep and look-around advanced regex :

$ echo "US/Central - 10:26 PM (CST)" | grep -oP "\-\s+\K\d{2}:\d{2}"

another solution using sed :

$ echo "US/Central - 10:26 PM (CST)" |
    sed 's/.*\- *\([0-9]\{2\}:[0-9]\{2\}\).*/\1/'

another solution using perl :

$ echo "US/Central - 10:26 PM (CST)" |
    perl -lne 'print $& if /\-\s+\K\d{2}:\d{2}/'

and last one using awk :

$ echo "US/Central - 10:26 PM (CST)" |
    awk '{for (i=0; i<=NF; i++){if ($i == "-"){print $(i+1);exit}}}'

Unfortunately the native browser present on Android devices not support this type of file. Let's see if in the 4.0 we will be able to do that.

If you must have a UITextField with 2 lines of text, one option is to add a UILabel as a subview of the UITextField for the second line of text. I have a UITextField in my app that users often do not realize is editable by tapping, and I wanted to add some small subtitle text that says "Tap to Edit" to the UITextField.

CGFloat tapLlblHeight = 10;
UILabel *tapEditLbl = [[UILabel alloc] initWithFrame:CGRectMake(20, textField.frame.size.height - tapLlblHeight - 2, 70, tapLlblHeight)];
tapEditLbl.backgroundColor = [UIColor clearColor];
tapEditLbl.textColor = [UIColor whiteColor];
tapEditLbl.text = @"Tap to Edit";

[textField addSubview:tapEditLbl];

The question is old, but still receives a lot of attention. As the existing answers are outdated, here a more up-to-date solution:

Resizing local images

As of knitr 1.12, there is the function include_graphics. From ?include_graphics (emphasis mine):

The major advantage of using this function is that it is portable in the sense that it works for all document formats that knitr supports, so you do not need to think if you have to use, for example, LaTeX or Markdown syntax, to embed an external image. Chunk options related to graphics output that work for normal R plots also work for these images, such as out.width and out.height.

Example:

```{r, out.width = "400px"}
knitr::include_graphics("path/to/image.png")
```

Advantages:

• Over agastudy's answer: No need for external libraries or for re-rastering the image.
• Over Shruti Kapoor's answer: No need to manually write HTML. Besides, the image is included in the self-contained version of the file.

Including generated images

To compose the path to a plot that is generated in a chunk (but not included), the chunk options opts_current$get("fig.path") (path to figure directory) as well as opts_current$get("label") (label of current chunk) may be useful. The following example uses fig.path to include the second of two images which were generated (but not displayed) in the first chunk:

```{r generate_figures, fig.show = "hide"}
library(knitr)
plot(1:10, col = "green")
plot(1:10, col = "red")
```

```{r}
include_graphics(sprintf("%sgenerate_figures-2.png", opts_current$get("fig.path")))
```

The general pattern of figure paths is [fig.path]/[chunklabel]-[i].[ext], where chunklabel is the label of the chunk where the plot has been generated, i is the plot index (within this chunk) and ext is the file extension (by default png in RMarkdown documents).

' hello  \n\tapple'.translate({ord(c):None for c in ' \n\t\r'})

MaK already pointed out the "translate" method above. And this variation works with Python 3 (see this Q&A).

One other easy way of doing it would be as follows (if you have a simple NetBeans project and not using maven for example).

1. In Eclipse, Go to File -> New -> Java Project
2. Give a name for your project and click finish to create your project
3. When the project is created find the source folder in NetBeans project, drag and drop all the source files from the NetBeans project to 'src' folder of your new created project in eclipse.
4. Move the java source files to respective package (if required)
5. Now you should be able to run your NetBeans project in Eclipse.

This is a version of Ben James's answer, above:

>>> import datetime
>>> x = datetime.date.today()
>>> print x
2013-01-11
>>> 
>>> 
>>> print "Today's date is %s ..." % x
Today's date is 2013-01-11 ...
>>> 
>>> print "Today's date is %r ..." % x
Today's date is datetime.date(2013, 1, 11) ...
>>>

When I ran this, it helped me see the usefulness of %r.

Turns out that I actually had the Java 7 JRE installed, not the JDK. The correct download link is here. After installing it, jdk1.7.0jdk appears in the JavaVirtualMachines directory.

apparently this problem got solved just by increasing queue size on my 3rd party smtp server. but the answer by Nip sounds like it is fairly usefull too

You should pass a Class...

private void foo(Class<?> t){
    if(t == String.class){ ... }
    else if(t == int.class){ ... }
}

private void bar()
{
   foo(String.class);
}

SELECT * FROM users WHERE created >= CURDATE();

But I think you mean created < today

Base64

Base64 is a generic term for a number of similar encoding schemes that encode binary data by treating it numerically and translating it into a base 64 representation. The Base64 term originates from a specific MIME content transfer encoding.

Base64 encoding schemes are commonly used when there is a need to encode binary data that needs be stored and transferred over media that are designed to deal with textual data. This is to ensure that the data remains intact without modification during transport. Base64 is used commonly in a number of applications including email via MIME, and storing complex data in XML.

see org.springframework.core.DefaultParameterNameDiscoverer class

DefaultParameterNameDiscoverer discoverer = new DefaultParameterNameDiscoverer();
String[] params = discoverer.getParameterNames(MathUtils.class.getMethod("isPrime", Integer.class));

As already mentioned, tern.js is a new and promising project with plugins for Sublime Text, Vim and Emacs. I´ve been using TernJS for Sublime for a while and the suggestions I get are way better than the standard ones:

Tern scans all .js files in your project. You can get support for DOM, nodejs, jQuery, and more by adding "libs" in your .sublime-project file:

"ternjs": {
    "exclude": ["wordpress/**", "node_modules/**"],
    "libs": ["browser", "jquery"],
    "plugins": {
        "requirejs": {
            "baseURL": "./js"
        }
    }
}

Please Try to pass parameters in httpoptions, you can follow function below

deleteAction(url, data) {
    const authToken = sessionStorage.getItem('authtoken');
    const options = {
      headers: new HttpHeaders({
        'Content-Type': 'application/json',
        Authorization: 'Bearer ' + authToken,
      }),
      body: data,
    };
    return this.client.delete(url, options);
  }

you can write .WorkbookConnection.Delete after .Refresh BackgroundQuery:=False this will delete text file external connection.

// CSS hack to prevent layout breaking in landscape
// e.g. screens larger than 320px  
html {
  width: 320px;
  overflow-x: hidden;
}

This, or a similar CSS solution, will at least preserve your layout if that is what you are after.

The root solution is accounting for device's capabilities rather than attempting to limit them. If the device doesn't allow you the appropriate limitation than a simple hack is your best bet since the design is essentially incomplete. The simpler the better.

One of the ways to do it is to drive this through your CI/CD systems. Once your parent image is built, have something that scans your git repos for images using that parent. If found, you'd then send a pull request to bump to new versions of the image. The pull request, if all tests pass, would be merged and you'd have a new child image based on updated parent. An example of a tool that takes this approach can be found here: https://engineering.salesforce.com/open-sourcing-dockerfile-image-update-6400121c1a75 .

If you don't control your parent image, as would be the case if you are depending on the official ubuntu image, you can write some tooling that detects changes in the parent image tag or checksum(not the same thing, tags are mutable) and invoke children image builds accordingly.

I think Compiling Python Code would be a good place to start:

Python source code is automatically compiled into Python byte code by the CPython interpreter. Compiled code is usually stored in PYC (or PYO) files, and is regenerated when the source is updated, or when otherwise necessary.

To distribute a program to people who already have Python installed, you can ship either the PY files or the PYC files. In recent versions, you can also create a ZIP archive containing PY or PYC files, and use a small “bootstrap script” to add that ZIP archive to the path.

To “compile” a Python program into an executable, use a bundling tool, such as Gordon McMillan’s installer (alternative download) (cross-platform), Thomas Heller’s py2exe (Windows), Anthony Tuininga’s cx_Freeze (cross-platform), or Bob Ippolito’s py2app (Mac). These tools puts your modules and data files in some kind of archive file, and creates an executable that automatically sets things up so that modules are imported from that archive. Some tools can embed the archive in the executable itself.

Follow these steps and your datanode will start again.

1)Stop dfs. 2)Open hdfs-site.xml 3)Remove the data.dir and name.dir properties from hdfs-site.xml and -format namenode again.

4)Then start dfs again.

A simple solution of error is that you first need to change the folder directory in command prompt. By default in command prompt or in terminal(Inside Android studio in the bottom)tab the path is set to C:\Users#Name of your PC that you selected\AndroidStudioProjects#app name\flutter_app> Change accordingly:- C:\Users#Name of your PC that you selected\AndroidStudioProjects#app name\flutter_app>cd\

type **cd** (#after flutter_app>), type only cd\ not comma's

then type cd Program Files\Java\jre1.8.0_251\bin (#remember to check the file name of jre properly)

now type keytool -list -v -keystore "%USERPROFILE%.android\debug.keystore" -alias androiddebugkey -storepass android -keypass android (without anyspace type the command).

screenshot of the codes to run

<select onchange = "selectChanged(this.value)">
  <item value = "1">one</item>
  <item value = "2">two</item>
</select>

and then the javascript...

function selectChanged(newvalue) {
  alert("you chose: " + newvalue);
}

document.getElementById('Id').value='new value';

https://developer.mozilla.org/en-US/docs/Web/API/document.getElementById

As I wrote in my comment, the solution to your problem is to write the following:

Set hyperLinkText = hprlink.Range

Set is needed because TextRange is a class, so hyperLinkText is an object; as such, if you want to assign it, you need to make it point to the actual object that you need.

The clearest answer. Does “X& const x” make any sense?

No, it is nonsense

To find out what the above declaration means, read it right-to-left: “x is a const reference to a X”. But that is redundant — references are always const, in the sense that you can never reseat a reference to make it refer to a different object. Never. With or without the const.

In other words, “X& const x” is functionally equivalent to “X& x”. Since you’re gaining nothing by adding the const after the &, you shouldn’t add it: it will confuse people — the const will make some people think that the X is const, as if you had said “const X& x”.

You can't select a sheet in a non-active workbook.

You must first activate the workbook, then you can select the sheet.

workbooks("A").activate
workbooks("A").worksheets("B").select 

When you use Activate it automatically activates the workbook.

Note you can select >1 sheet in a workbook:

activeworkbook.sheets(array("sheet1","sheet3")).select

but only one sheet can be Active, and if you activate a sheet which is not part of a multi-sheet selection then those other sheets will become un-selected.

Actually, em.flush(), do more than just sends the cached SQL commands. It tries to synchronize the persistence context to the underlying database. It can cause a lot of time consumption on your processes if your cache contains collections to be synchronized.

Caution on using it.

The definition of the perfmon counters has been broken since the beginning and for some reason appears to be too hard to correct.

A good overview of Windows memory management is available in the video "Mysteries of Memory Management Revealed" on MSDN: It covers more topics than needed to track memory leaks (eg working set management) but gives enough detail in the relevant topics.

To give you a hint of the problem with the perfmon counter descriptions, here is the inside story about private bytes from "Private Bytes Performance Counter -- Beware!" on MSDN:

Q: When is a Private Byte not a Private Byte?

A: When it isn't resident.

The Private Bytes counter reports the commit charge of the process. That is to say, the amount of space that has been allocated in the swap file to hold the contents of the private memory in the event that it is swapped out. Note: I'm avoiding the word "reserved" because of possible confusion with virtual memory in the reserved state which is not committed.

From "Performance Planning" on MSDN:

3.3 Private Bytes

3.3.1 Description

Private memory, is defined as memory allocated for a process which cannot be shared by other processes. This memory is more expensive than shared memory when multiple such processes execute on a machine. Private memory in (traditional) unmanaged dlls usually constitutes of C++ statics and is of the order of 5% of the total working set of the dll.

daniele3004's answer is already pretty good.

Just a quick and dirty formula for people like me who mixes up run and start from time to time:

docker run [...] = docker pull [...] + docker start [...]

Each browser provides a default stylesheet, called the user agent stylesheet, in case an HTML file does not specify one. Styles that you specify override the defaults.

Because you have not specified values for the table element’s box, the default styles have been applied.

Try to change the port number in application.yaml (or application.properties) to something else.

Microsoft.Office.Interop.Excel.Application excapp;

excapp = new Microsoft.Office.Interop.Excel.Application();

object misval=System.Reflection.Missing.Value;

Workbook wrkbuk = new Workbook();

Worksheet wrksht = new Worksheet();

wrkbuk = excapp.Workbooks._Open(@"C:\Users\...\..._template_v1.0.xlsx", misval, misval, 
misval, misval, misval, misval, misval, misval, misval, misval, misval, misval);

wrksht = (Microsoft.Office.Interop.Excel.Worksheet)wrkbuk.Worksheets.get_Item(2);

These solutions has bug. When use solutions at below, windows has delay at closing.

Menu.setApplicationMenu(null),
&&
const updateErrorWindow = new BrowserWindow({autoHideMenuBar: true});

I used solution at below. This is better for now.

const window= new BrowserWindow({...});
window.setMenuBarVisibility(false);

Which protocol performs better (in terms of throughput) - UDP or TCP - really depends on the network characteristics and the network traffic. Robert S. Barnes, for example, points out a scenario where TCP performs better (small-sized writes). Now, consider a scenario in which the network is congested and has both TCP and UDP traffic. Senders in the network that are using TCP, will sense the 'congestion' and cut down on their sending rates. However, UDP doesn't have any congestion avoidance or congestion control mechanisms, and senders using UDP would continue to pump in data at the same rate. Gradually, TCP senders would reduce their sending rates to bare minimum and if UDP senders have enough data to be sent over the network, they would hog up the majority of bandwidth available. So, in such a case, UDP senders will have greater throughput, as they get the bigger pie of the network bandwidth. In fact, this is an active research topic - How to improve TCP throughput in presence of UDP traffic. One way, that I know of, using which TCP applications can improve throughput is by opening multiple TCP connections. That way, even though, each TCP connection's throughput might be limited, the sum total of the throughput of all TCP connections may be greater than the throughput for an application using UDP.

and if data in "age" column has similar records (i.e. many people are 25 years old, many others are 32 and so on), it causes confusion in aligning right count to each student. in order to avoid it, I joined the tables on student ID as well.

SELECT S.id, S.age, C.cnt
FROM Students S 
INNER JOIN (SELECT id, age, count(age) as cnt  FROM Students GROUP BY student,age) 
C ON S.age = C.age *AND S.id = C.id*

almost nothing was said about error displaying except check error logs, but there's a rather helpful functionality:

<?php
/* Provoke an error -- bogus SQL syntax */
$stmt = $dbh->prepare('bogus sql');
if (!$stmt) {
    echo "\PDO::errorInfo():\n";
    print_r($dbh->errorInfo());
}
?>

(source link)

it is clear that this code can be modified to be used as exception message or any other kind of error handling

There is no need for jQuery here, regular JavaScript will do:

var str = "Abc: Lorem ipsum sit amet";
str = str.substring(str.indexOf(":") + 1);

Or, the .split() and .pop() version:

var str = "Abc: Lorem ipsum sit amet";
str = str.split(":").pop();

Or, the regex version (several variants of this):

var str = "Abc: Lorem ipsum sit amet";
str = /:(.+)/.exec(str)[1];

Either attribute can be applied to View's (visual control) horizontal or vertical size. It's used to set a View or Layouts size based on either it's contents or the size of it's parent layout rather than explicitly specifying a dimension.

fill_parent (deprecated and renamed MATCH_PARENT in API Level 8 and higher)

Setting the layout of a widget to fill_parent will force it to expand to take up as much space as is available within the layout element it's been placed in. It's roughly equivalent of setting the dockstyle of a Windows Form Control to Fill.

Setting a top level layout or control to fill_parent will force it to take up the whole screen.

wrap_content

Setting a View's size to wrap_content will force it to expand only far enough to contain the values (or child controls) it contains. For controls -- like text boxes (TextView) or images (ImageView) -- this will wrap the text or image being shown. For layout elements it will resize the layout to fit the controls / layouts added as its children.

It's roughly the equivalent of setting a Windows Form Control's Autosize property to True.

Online Documentation

There's some details in the Android code documentation here.

Operations with a Python list operate on the list. list1 and list2 will check if list1 is empty, and return list1 if it is, and list2 if it isn't. list1 + list2 will append list2 to list1, so you get a new list with len(list1) + len(list2) elements.

Operators that only make sense when applied element-wise, such as &, raise a TypeError, as element-wise operations aren't supported without looping through the elements.

Numpy arrays support element-wise operations. array1 & array2 will calculate the bitwise or for each corresponding element in array1 and array2. array1 + array2 will calculate the sum for each corresponding element in array1 and array2.

This does not work for and and or.

array1 and array2 is essentially a short-hand for the following code:

if bool(array1):
    return array2
else:
    return array1

For this you need a good definition of bool(array1). For global operations like used on Python lists, the definition is that bool(list) == True if list is not empty, and False if it is empty. For numpy's element-wise operations, there is some disambiguity whether to check if any element evaluates to True, or all elements evaluate to True. Because both are arguably correct, numpy doesn't guess and raises a ValueError when bool() is (indirectly) called on an array.

IF you have array in your array, you'll have to adapt the function by Eran a little bit...

function sortArrayByArray($array,$orderArray) {
    $ordered = array();
    foreach($orderArray as $key => $value) {
        if(array_key_exists($key,$array)) {
                $ordered[$key] = $array[$key];
                unset($array[$key]);
        }
    }
    return $ordered + $array;
}

$sql = "SELECT * FROM table_name ORDER BY ID DESC LIMIT 1";
$records = mysql_query($sql);

you can change LIMIT 1 to LIMIT any number you want

This will show you the last INSERTED row first.

I was been getting that error in mobile safari when using ASP.NET MVC to return a FileResult with the overload that returns a file with a different file name than the original. So,

return File(returnFilePath, contentType, fileName);

would give the error in mobile safari, where as

return File(returnFilePath, contentType);

would not.

I don't even remember why I thought what I was doing was a good idea. Trying to be clever I guess.

If you don't mind hardcoding it you can do this ~> android:background="#eeeeee" and drop any hex color # you wish.

Looks like this....

<Button
    android:id="@+id/button1"
    android:layout_width="wrap_content"
    android:layout_height="wrap_content"
    android:layout_alignParentLeft="true"
    android:layout_alignParentRight="true"
    android:layout_below="@+id/textView1"
    android:text="@string/ClickMe"
    android:background="#fff"/>

Knowing the scope of each can make things easier to remember.

process is node's global object, and .cwd() returns where node is running.

__dirname is module's property, and represents the file path of the module. In node, one module resides in one file.

Similarly, __filename is another module's property, which holds the file name of the module.

In the case you want to format it within a formula (for example, if you are concatenating strings and values), the aforementioned format option of Google is not available, but you can use the TEXT formula:

=TEXT(B1-C1,"HH:MM:SS")

Therefore, for the questioned example, with concatenation:

="The number of " & TEXT(B1,"HH") & " hour slots in " & TEXT(C1,"HH") _
& " is " & TEXT(C1/B1,"HH")

Cheers

In addition to the other answer, I would like to point out that this reasoning is also known as the De Morgan's law. It's actually more about mathematics than programming, but it is so fundamental that every programmer should know about it.

Your problem started like this:

enabled  = A and B
disabled = not ( A and B )

So far so good, but you went one step further and tried to remove the braces. And that's a little tricky, because you have to replace the and/&& with an or/||.

not ( A and B ) = not(A) OR not(B)

Or in a more mathematical notation:

I always keep this law in mind whenever I simplify conditions or work with probabilities.

Just subscribe to the control's ToolTipTextNeeded event, and return e.TooltipText, much simpler.

You can create constants in many different ways:

const myString = "hello"
const pi = 3.14 // untyped constant
const life int = 42 // typed constant (can use only with ints)

You can also create a enum constant:

const ( 
   First = 1
   Second = 2
   Third = 4
)

You can not create constants of maps, arrays and it is written in effective go:

Constants in Go are just that—constant. They are created at compile time, even when defined as locals in functions, and can only be numbers, characters (runes), strings or booleans. Because of the compile-time restriction, the expressions that define them must be constant expressions, evaluatable by the compiler. For instance, 1<<3 is a constant expression, while math.Sin(math.Pi/4) is not because the function call to math.Sin needs to happen at run time.

TLDR

Use

• rake db:migrate If you wanna make changes to the schema
• rake db:reset If you wanna drop the database, reload the schema from schema.rb, and reseed the database
• rake db:schema:load If you wanna reset database to schema as provided in schema.rb (This will delete all data)

Explanations

rake db:schema:load will set up the schema as provided in schema.rb file. This is useful for a fresh install of app as it doesn't take as much time as db:migrate

Important note, db:schema:load will delete data on server.

rake db:migrate makes changes to the existing schema. Its like creating versions of schema. db:migrate will look in db/migrate/ for any ruby files and execute the migrations that aren't run yet starting with the oldest. Rails knows which file is the oldest by looking at the timestamp at the beginning of the migration filename. db:migrate comes with a benefit that data can also be put in the database. This is actually not a good practice. Its better to use rake db:seed to add data.

rake db:migrate provides tasks up, down etc which enables commands like rake db:rollback and makes it the most useful command.

rake db:reset does a db:drop and db:setup
It drops the database, create it again, loads the schema, and initializes with the seed data

Relevant part of the commands from databases.rake

namespace :schema do
  desc 'Creates a db/schema.rb file that is portable against any DB supported by Active Record'
  task :dump => [:environment, :load_config] do
    require 'active_record/schema_dumper'
    filename = ENV['SCHEMA'] || File.join(ActiveRecord::Tasks::DatabaseTasks.db_dir, 'schema.rb')
    File.open(filename, "w:utf-8") do |file|
      ActiveRecord::SchemaDumper.dump(ActiveRecord::Base.connection, file)
    end
    db_namespace['schema:dump'].reenable
  end

  desc 'Loads a schema.rb file into the database'
  task :load => [:environment, :load_config, :check_protected_environments] do
    ActiveRecord::Tasks::DatabaseTasks.load_schema_current(:ruby, ENV['SCHEMA'])
  end

  # desc 'Drops and recreates the database from db/schema.rb for the current environment and loads the seeds.'
  task :reset => [ 'db:drop', 'db:setup' ]

namespace :migrate do
  # desc  'Rollbacks the database one migration and re migrate up (options: STEP=x, VERSION=x).'
  task :redo => [:environment, :load_config] do
    if ENV['VERSION']
      db_namespace['migrate:down'].invoke
      db_namespace['migrate:up'].invoke
    else
      db_namespace['rollback'].invoke
      db_namespace['migrate'].invoke
    end
  end

If you are only saving a single object (your data frame), you could also use saveRDS.
To save:

saveRDS(foo, file="data.Rda")

Then read it with:

bar <- readRDS(file="data.Rda")

The difference between saveRDS and save is that in the former only one object can be saved and the name of the object is not forced to be the same after you load it.

I had a similar case using Ubuntu. The machine had only the JRE installed. So, I just executed the command below to install the JDK.

sudo apt install openjdk-8-jdk

It is possible to upack without node installed using the following 7-Zip plugin:
http://www.tc4shell.com/en/7zip/asar/

Thanks @MayaPosch for mentioning that in this comment.

We can simply map a Controller method for the default view. For eg, we have a index.html as the default page.

@RequestMapping(value = "/", method = GET)
public String index() {
    return "index";
}

once done we can access the page with default application context.

E.g http://localhost:8080/myapp

You cannot specify that it's always a file. If you don't need xcopy's other features, why not just use regular copy?

Just go to the folder path and type cmd on it. Then press ENTER enter image description here

This worked for me

df.sort_values(by='Column_name', inplace=True, ascending=False)

Are you referring to the server side or the client side?

For a client, you would want to adjust the sendTimeout attribute of a binding element. For a service, you would want to adjust the receiveTimeout attribute of a binding elemnent.

<system.serviceModel>
  <bindings>
    <netTcpBinding>
      <binding name="longTimeoutBinding"
        receiveTimeout="00:10:00" sendTimeout="00:10:00">
        <security mode="None"/>
      </binding>
    </netTcpBinding>
  </bindings>

  <services>
    <service name="longTimeoutService"
      behaviorConfiguration="longTimeoutBehavior">
      <endpoint address="net.tcp://localhost/longtimeout/"
        binding="netTcpBinding" bindingConfiguration="longTimeoutBinding" />
    </service>
....

Of course, you have to map your desired endpoint to that particular binding.

The OVER clause specifies the partitioning, ordering and window "over which" the analytic function operates.

Example #1: calculate a moving average

AVG(amt) OVER (ORDER BY date ROWS BETWEEN 1 PRECEDING AND 1 FOLLOWING)

date   amt   avg_amt
=====  ====  =======
1-Jan  10.0  10.5
2-Jan  11.0  17.0
3-Jan  30.0  17.0
4-Jan  10.0  18.0
5-Jan  14.0  12.0

It operates over a moving window (3 rows wide) over the rows, ordered by date.

Example #2: calculate a running balance

SUM(amt) OVER (ORDER BY date ROWS BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW)

date   amt   sum_amt
=====  ====  =======
1-Jan  10.0  10.0
2-Jan  11.0  21.0
3-Jan  30.0  51.0
4-Jan  10.0  61.0
5-Jan  14.0  75.0

It operates over a window that includes the current row and all prior rows.

Note: for an aggregate with an OVER clause specifying a sort ORDER, the default window is UNBOUNDED PRECEDING to CURRENT ROW, so the above expression may be simplified to, with the same result:

SUM(amt) OVER (ORDER BY date)

Example #3: calculate the maximum within each group

MAX(amt) OVER (PARTITION BY dept)

dept  amt   max_amt
====  ====  =======
ACCT   5.0   7.0
ACCT   7.0   7.0
ACCT   6.0   7.0
MRKT  10.0  11.0
MRKT  11.0  11.0
SLES   2.0   2.0

It operates over a window that includes all rows for a particular dept.

SQL Fiddle: http://sqlfiddle.com/#!4/9eecb7d/122

The error is:

Can not deserialize instance of java.lang.String out of START_ARRAY token at [Source: line: 1, column: 1095] (through reference chain: JsonGen["platforms"])

In JSON, platforms look like this:

"platforms": [
    {
        "platform": "iphone"
    },
    {
        "platform": "ipad"
    },
    {
        "platform": "android_phone"
    },
    {
        "platform": "android_tablet"
    }
]

So try change your pojo to something like this:

private List platforms;

public List getPlatforms(){
    return this.platforms;
}

public void setPlatforms(List platforms){
    this.platforms = platforms;
}

EDIT: you will need change mobile_networks too. Will look like this:

private List mobile_networks;

public List getMobile_networks() {
    return mobile_networks;
}

public void setMobile_networks(List mobile_networks) {
    this.mobile_networks = mobile_networks;
}

In the command prompt, type the command below and press Enter.

bcdedit /enum

Under the Windows Boot Loader sections, make note of the identifier value.

To start in safe mode from command prompt :

bcdedit /set {identifier} safeboot minimal 

Then enter the command line to reboot your computer.

You are getting this error because the parameter required is Activity and you are passing it the Application. So, either you cast application to the Activity like: (Activity)getApplicationContext(); Or you can just type the Activity like: MyActivity.this

If using Django, you can use the timezone.localtime method:

from django.utils import timezone
date 
# datetime.datetime(2014, 8, 1, 20, 15, 0, 513000, tzinfo=<UTC>)

timezone.localtime(date)
# datetime.datetime(2014, 8, 1, 16, 15, 0, 513000, tzinfo=<DstTzInfo 'America/New_York' EDT-1 day, 20:00:00 DST>)

Use subscripting to access the value for a dictionary key. This will return an Optional:

let apple: String? = companies["AAPL"]

or

if let apple = companies["AAPL"] {
    // ...
}

You can also enumerate over all of the keys and values:

var companies = ["AAPL" : "Apple Inc", "GOOG" : "Google Inc", "AMZN" : "Amazon.com, Inc", "FB" : "Facebook Inc"]

for (key, value) in companies {
    print("\(key) -> \(value)")
}

Or enumerate over all of the values:

for value in Array(companies.values) {
    print("\(value)")
}

Faster way of doing this:

WHERE interests LIKE '%sports%' OR interests LIKE '%pub%'

is this:

WHERE interests REGEXP 'sports|pub'

Found this solution here: http://forums.mysql.com/read.php?10,392332,392950#msg-392950

More about REGEXP here: http://www.tutorialspoint.com/mysql/mysql-regexps.htm

Subtract datetime.timedelta(days=1)

Only a few attributes get compiler support, but one very interesting use of attributes is in AOP: PostSharp uses your bespoke attributes to inject IL into methods, allowing all manner of abilities... log/trace being trivial examples - but some other good examples are things like automatic INotifyPropertyChanged implementation (here).

Some that occur and impact the compiler or runtime directly:

• [Conditional("FOO")] - calls to this method (including argument evaluation) only occur if the "FOO" symbol is defined during build
• [MethodImpl(...)] - used to indicate a few thing like synchronization, inlining
• [PrincipalPermission(...)] - used to inject security checks into the code automatically
• [TypeForwardedTo(...)] - used to move types between assemblies without rebuilding the callers

For things that are checked manually via reflection - I'm a big fan of the System.ComponentModel attributes; things like [TypeDescriptionProvider(...)], [TypeConverter(...)], and [Editor(...)] which can completely change the behavior of types in data-binding scenarios (i.e. dynamic properties etc).

Just use str.replace(',', '.') - it is both fast and efficient when a single character is to be replaced. And if the comma doesn't exist, it does nothing.

Sql server unlike oracle does not need commits unless you are using transactions.
Immediatly after your update statement the table will be commited, don't use the commit command in this scenario.

Not really. This is normally done using javascript.

there is a good discussion of ways of doing this here...

Autosizing textarea using Prototype

So here is the controller code.

public IActionResult AddURLTest()
{
    return ViewComponent("AddURL");
}

You can load it using JQuery load method.

$(document).ready (function(){
    $("#LoadSignIn").click(function(){
        $('#UserControl').load("/Home/AddURLTest");
    });
});

source code link

To make it short you could use "companion object" to get into Kotlin static world like :

  companion object {
    const val TAG = "tHomeFragment"
    fun newInstance() = HomeFragment()
}

and to make a constant field use "const val" as in the code. but try to avoid the static classes as it is making difficulties in unit testing using Mockito!.

I've done this with PowerShell:

function DownloadFromFtp($destination, $ftp_uri, $user, $pass){
    $dirs = GetDirecoryTree $ftp_uri $user $pass

    foreach($dir in $dirs){
       $path = [io.path]::Combine($destination,$dir)

       if ((Test-Path $path) -eq $false) {
          "Creating $path ..."
          New-Item -Path $path -ItemType Directory | Out-Null
       }else{
          "Exists $path ..."
       }
    }

    $files = GetFilesTree $ftp_uri $user $pass

    foreach($file in $files){
        $source = [io.path]::Combine($ftp_uri,$file)
        $dest = [io.path]::Combine($destination,$file)

        "Downloading $source ..."
        Get-FTPFile $source $dest $user $pass
    }
}

function UploadToFtp($artifacts, $ftp_uri, $user, $pass){
    $webclient = New-Object System.Net.WebClient 
    $webclient.Credentials = New-Object System.Net.NetworkCredential($user,$pass)  

    foreach($item in Get-ChildItem -recurse $artifacts){ 

        $relpath = [system.io.path]::GetFullPath($item.FullName).SubString([system.io.path]::GetFullPath($artifacts).Length + 1)

        if ($item.Attributes -eq "Directory"){

            try{
                Write-Host Creating $item.Name

                $makeDirectory = [System.Net.WebRequest]::Create($ftp_uri+$relpath);
                $makeDirectory.Credentials = New-Object System.Net.NetworkCredential($user,$pass) 
                $makeDirectory.Method = [System.Net.WebRequestMethods+FTP]::MakeDirectory;
                $makeDirectory.GetResponse();

            }catch [Net.WebException] {
                Write-Host $item.Name probably exists ...
            }

            continue;
        }

        "Uploading $item..."
        $uri = New-Object System.Uri($ftp_uri+$relpath) 
        $webclient.UploadFile($uri, $item.FullName)
    }
}

 function Get-FTPFile ($Source,$Target,$UserName,$Password) 
 { 
     $ftprequest = [System.Net.FtpWebRequest]::create($Source) 
     $ftprequest.Credentials = New-Object System.Net.NetworkCredential($username,$password) 
     $ftprequest.Method = [System.Net.WebRequestMethods+Ftp]::DownloadFile 
     $ftprequest.UseBinary = $true 
     $ftprequest.KeepAlive = $false 

     $ftpresponse = $ftprequest.GetResponse() 
     $responsestream = $ftpresponse.GetResponseStream() 

     $targetfile = New-Object IO.FileStream ($Target,[IO.FileMode]::Create) 
     [byte[]]$readbuffer = New-Object byte[] 1024 

     do{ 
         $readlength = $responsestream.Read($readbuffer,0,1024) 
         $targetfile.Write($readbuffer,0,$readlength) 
     } 
     while ($readlength -ne 0) 

     $targetfile.close() 
 } 

#task ListFiles {
#   
#    $files = GetFilesTree 'ftp://127.0.0.1/' "web" "web"
#    $files | ForEach-Object {Write-Host $_ -foregroundcolor cyan}
#}

function GetDirecoryTree($ftp, $user, $pass){
    $creds = New-Object System.Net.NetworkCredential($user,$pass)

    $files = New-Object "system.collections.generic.list[string]"
    $folders = New-Object "system.collections.generic.queue[string]"
    $folders.Enqueue($ftp)

    while($folders.Count -gt 0){
        $fld = $folders.Dequeue()

        $newFiles = GetAllFiles $creds $fld
        $dirs = GetDirectories $creds $fld

        foreach ($line in $dirs){
            $dir = @($newFiles | Where { $line.EndsWith($_) })[0]
            [void]$newFiles.Remove($dir)
            $folders.Enqueue($fld + $dir + "/")

            [void]$files.Add($fld.Replace($ftp, "") + $dir + "/")
        }
    }

    return ,$files
}

function GetFilesTree($ftp, $user, $pass){
    $creds = New-Object System.Net.NetworkCredential($user,$pass)

    $files = New-Object "system.collections.generic.list[string]"
    $folders = New-Object "system.collections.generic.queue[string]"
    $folders.Enqueue($ftp)

    while($folders.Count -gt 0){
        $fld = $folders.Dequeue()

        $newFiles = GetAllFiles $creds $fld
        $dirs = GetDirectories $creds $fld

        foreach ($line in $dirs){
            $dir = @($newFiles | Where { $line.EndsWith($_) })[0]
            [void]$newFiles.Remove($dir)
            $folders.Enqueue($fld + $dir + "/")
        }

        $newFiles | ForEach-Object { 
            $files.Add($fld.Replace($ftp, "") + $_) 
        }
    }

    return ,$files
}

function GetDirectories($creds, $fld){
    $dirs = New-Object "system.collections.generic.list[string]"

    $operation = [System.Net.WebRequestMethods+Ftp]::ListDirectoryDetails
    $reader = GetStream $creds $fld $operation
    while (($line = $reader.ReadLine()) -ne $null) {

       if ($line.Trim().ToLower().StartsWith("d") -or $line.Contains(" <DIR> ")) {
            [void]$dirs.Add($line)
        }
    }
    $reader.Dispose();

    return ,$dirs
}

function GetAllFiles($creds, $fld){
    $newFiles = New-Object "system.collections.generic.list[string]"
    $operation = [System.Net.WebRequestMethods+Ftp]::ListDirectory

    $reader = GetStream $creds $fld $operation

    while (($line = $reader.ReadLine()) -ne $null) {
       [void]$newFiles.Add($line.Trim()) 
    }
    $reader.Dispose();

    return ,$newFiles
}

function GetStream($creds, $url, $meth){

    $ftp = [System.Net.WebRequest]::Create($url)
    $ftp.Credentials = $creds
    $ftp.Method = $meth
    $response = $ftp.GetResponse()

    return New-Object IO.StreamReader $response.GetResponseStream()
}

Export-ModuleMember UploadToFtp, DownLoadFromFtp

HtmlAgilityPack uses XPath syntax, and though many argues that it is poorly documented, I had no trouble using it with help from this XPath documentation: https://www.w3schools.com/xml/xpath_syntax.asp

To parse

<h2>
  <a href="">Jack</a>
</h2>
<ul>
  <li class="tel">
    <a href="">81 75 53 60</a>
  </li>
</ul>
<h2>
  <a href="">Roy</a>
</h2>
<ul>
  <li class="tel">
    <a href="">44 52 16 87</a>
  </li>
</ul>

I did this:

string url = "http://website.com";
var Webget = new HtmlWeb();
var doc = Webget.Load(url);
foreach (HtmlNode node in doc.DocumentNode.SelectNodes("//h2//a"))
{
  names.Add(node.ChildNodes[0].InnerHtml);
}
foreach (HtmlNode node in doc.DocumentNode.SelectNodes("//li[@class='tel']//a"))
{
  phones.Add(node.ChildNodes[0].InnerHtml);
}

when you add more space between double quotes or single quotes PHP takes only one white space ,so if you want to add more white space between words or strings use tab '\t' sequence

echo "\t";

How to show images stored in numpy array with example (works in Jupyter notebook)

I know there are simpler answers but this one will give you understanding of how images are actually drawn from a numpy array.

Load example

from sklearn.datasets import load_digits
digits = load_digits()
digits.images.shape   #this will give you (1797, 8, 8). 1797 images, each 8 x 8 in size

Display array of one image

digits.images[0]
array([[ 0.,  0.,  5., 13.,  9.,  1.,  0.,  0.],
       [ 0.,  0., 13., 15., 10., 15.,  5.,  0.],
       [ 0.,  3., 15.,  2.,  0., 11.,  8.,  0.],
       [ 0.,  4., 12.,  0.,  0.,  8.,  8.,  0.],
       [ 0.,  5.,  8.,  0.,  0.,  9.,  8.,  0.],
       [ 0.,  4., 11.,  0.,  1., 12.,  7.,  0.],
       [ 0.,  2., 14.,  5., 10., 12.,  0.,  0.],
       [ 0.,  0.,  6., 13., 10.,  0.,  0.,  0.]])

Create empty 10 x 10 subplots for visualizing 100 images

import matplotlib.pyplot as plt
fig, axes = plt.subplots(10,10, figsize=(8,8))

Plotting 100 images

for i,ax in enumerate(axes.flat):
    ax.imshow(digits.images[i])

Result:

What does axes.flat do? It creates a numpy enumerator so you can iterate over axis in order to draw objects on them. Example:

import numpy as np
x = np.arange(6).reshape(2,3)
x.flat
for item in (x.flat):
    print (item, end=' ')

Tag ids must be unique. You are updating the span with ID 'ItemCostSpan' of which there are two. Give the span a class and get it using find.

    $("legend").each(function() {
        var SoftwareItem = $(this).text();
        itemCost = GetItemCost(SoftwareItem);
        $("input:checked").each(function() {               
            var Component = $(this).next("label").text();
            itemCost += GetItemCost(Component);
        });            
        $(this).find(".ItemCostSpan").text("Item Cost = $ " + itemCost);
    });

If you're setting the button text by using the 'value' attribute you'll need to set

• $(this).val()

instead of:

• $(this).text()

Also in my situation it worked better to add the JQuery direct to the onclick event of the button:

onclick="$(this).val(function (i, text) { return text == 'PUSH ME' ? 'DON'T PUSH ME' : 'PUSH ME'; });"

int is a primitive type. Variables of type int store the actual binary value for the integer you want to represent. int.parseInt("1") doesn't make sense because int is not a class and therefore doesn't have any methods.

Integer is a class, no different from any other in the Java language. Variables of type Integer store references to Integer objects, just as with any other reference (object) type. Integer.parseInt("1") is a call to the static method parseInt from class Integer (note that this method actually returns an int and not an Integer).

To be more specific, Integer is a class with a single field of type int. This class is used where you need an int to be treated like any other object, such as in generic types or situations where you need nullability.

Note that every primitive type in Java has an equivalent wrapper class:

• byte has Byte
• short has Short
• int has Integer
• long has Long
• boolean has Boolean
• char has Character
• float has Float
• double has Double

Wrapper classes inherit from Object class, and primitive don't. So it can be used in collections with Object reference or with Generics.

Since java 5 we have autoboxing, and the conversion between primitive and wrapper class is done automatically. Beware, however, as this can introduce subtle bugs and performance problems; being explicit about conversions never hurts.

2017-05 update:

I just found that if you add the following line into your vimrc file,

set clipboard=unnamed

then Vim is using the system clipboard.

I just found the yank way won't work on the way where I copy contents between different Vim instance windows. (At least, it doesn't work based on my Vim knowledge. I don't know if there is another way to enable it to work).

The yank way only works on the way where multiple files are opened in the same window according to my test.

If you want to do that, you'd better use OS cut-copy-past way such as Ctrl + x, Ctrl + c (under Windows).

Try this sed version:

ls -l | sed '2 ! d'

It says "delete all the lines that aren't the second one".

Specifically relating to the error you're getting, you can't do something like this in PHP for a nullable field in MySQL:

$sql = 'INSERT INTO table (col1, col2) VALUES(' . $col1 . ', ' . null . ')';

Because null in PHP will equate to an empty string which is not the same as a NULL value in MysQL. Instead you want to do this:

$sql = 'INSERT INTO table (col1, col2) VALUES(' . $col1 . ', ' . (is_null($col2) ? 'NULL' : $col2). ')';

Of course you don't have to use is_null but I figure that it demonstrates the point a little better. Probably safer to use empty() or something like that. And if $col2 happens to be a string which you would enclose in double quotes in the query, don't forget not to include those around the 'NULL' string, otherwise it wont work.

Hope that helps!

CURL request by default is GET, you don't have to set any options to make a GET CURL request.

Or you could loop through it backeards

int[] firstArray = new int[]{1,2,3,4};
int[] reversedArray = new int[firstArray.length];
int j = 0;
for (int i = firstArray.length -1; i > 0; i--){
    reversedArray[j++] = firstArray[i];
}

(note: I have not compiled this but hopefully it is correct)

For users of SQL 2000, the actual command that will provide this information is:

select c.text
from sysobjects     o
join syscomments    c on c.id = o.id
where o.name = '<view_name_here>'
  and o.type      = 'V'

This will count time between to dates:

SELECT
  (TO_CHAR( TRUNC (ROUND(((sysdate+1) - sysdate)*24,2))*60,'999999')
  +
  TO_CHAR(((((sysdate+1)-sysdate)*24)- TRUNC(ROUND(((sysdate+1) - sysdate)*24,2)))/100*60 *100, '09'))/60
FROM dual

Code check:

This is offtopic here but the people over at CodeReview are more than happy to help you.

I strongly suggest you to do so, there are several things that need attention in your code. Likewise I suggest that you do start reading tutorials since there is really no good reason not to do so.

Lists:

As you said yourself: you need a list of items. The way it is now you only store a reference to one item. Lucky there is exactly that to hold a group of related objects: a List.

Lists are very straightforward to use but take a look at the related documentation anyway.

A very simple example to keep multiple bikes in a list:

List<Motorbike> bikes = new List<Motorbike>();

bikes.add(new Bike { make = "Honda", color = "brown" });
bikes.add(new Bike { make = "Vroom", color = "red" });

And to iterate over the list you can use the foreach statement:

foreach(var bike in bikes) {
     Console.WriteLine(bike.make);
}

None of the current answers will work for WHM / cPanel servers.

To increase the limit in WHM:

1. Navigate to Server Configuration > Tweak Settings
2. Choose the PHP tab
3. Update "cPanel PHP max POST size" & "cPanel PHP max upload size" (POST size should be bigger)

After so much effort, found that the basic difference is you need to send the JsonObject instead of JSONObject as parameter.

You can do a form.serializeArray(), then add name-value pairs before posting:

var form = $(this).closest('form');

form = form.serializeArray();

form = form.concat([
    {name: "customer_id", value: window.username},
    {name: "post_action", value: "Update Information"}
]);

$.post('/change-user-details', form, function(d) {
    if (d.error) {
        alert("There was a problem updating your user details")
    } 
});

Set your .on listener to check for specific select2 events. The "change" event is the same as usual but the others are specific to the select2 control thus:

• change
• select2-opening
• select2-open
• select2-close
• select2-highlight
• select2-selecting
• select2-removed
• select2-loaded
• select2-focus

The names are self-explanatory. For example, select2-focus fires when you give focus to the control.

In the root path create a .htaccess file with

<IfModule mod_rewrite.c>
Options +FollowSymLinks
RewriteEngine On

RewriteCond %{REQUEST_URI} !^/public/ 

RewriteCond %{REQUEST_FILENAME} !-d
RewriteCond %{REQUEST_FILENAME} !-f



RewriteRule ^(.*)$ /public/$1 
#RewriteRule ^ index.php [L]
RewriteRule ^(/)?$ public/index.php [L] 
</IfModule>

In public directory create a .htaccess file

<IfModule mod_rewrite.c>
    <IfModule mod_negotiation.c>
        Options -MultiViews -Indexes
    </IfModule>

    RewriteEngine On

    # Handle Authorization Header
    RewriteCond %{HTTP:Authorization} .
    RewriteRule .* - [E=HTTP_AUTHORIZATION:%{HTTP:Authorization}]

    # Redirect Trailing Slashes If Not A Folder...
    RewriteCond %{REQUEST_FILENAME} !-d
    RewriteCond %{REQUEST_URI} (.+)/$
    RewriteRule ^ %1 [L,R=301]

    # Handle Front Controller...
    RewriteCond %{REQUEST_FILENAME} !-d
    RewriteCond %{REQUEST_FILENAME} !-f
    RewriteRule ^ index.php [L]
</IfModule>

if you have done any changes in public/index.php file correct them with the right path then your site will be live.

what will solve with this?

• Hosting issue of laravel project.
• Css not work on laravel.
• Laravel site not work.
• laravel site load with domain/public/index.php
• laravel project does not redirect correctly

I'd prefer this way to redirect standard output (native PowerShell)...

($foo = someFunction) | out-null

But this works too:

($foo = someFunction) > $null

To redirect just standard error after defining $foo with result of "someFunction", do

($foo = someFunction) 2> $null

This is effectively the same as mentioned above.

Or to redirect any standard error messages from "someFunction" and then defining $foo with the result:

$foo = (someFunction 2> $null)

To redirect both you have a few options:

2>&1>$null
2>&1 | out-null

GCC 4.9 introduces a newer C++ ABI version than your system libstdc++ has, so you need to tell the loader to use this newer version of the library by adding that path to LD_LIBRARY_PATH. Unfortunately, I cannot tell you straight off where the libstdc++ so for your GCC 4.9 installation is located, as this depends on how you configured GCC. So you need something in the style of:

export LD_LIBRARY_PATH=/home/user/lib/gcc-4.9.0/lib:/home/user/lib/boost_1_55_0/stage/lib:$LD_LIBRARY_PATH

Note the actual path may be different (there might be some subdirectory hidden under there, like `x86_64-unknown-linux-gnu/4.9.0´ or similar).

A really fast way to solve this problem is to make a database link from the Oracle database to the MySQL database. You can create database links to non-Oracle databases. After you have created the database link you can retrieve your data from the MySQL database with a ... create table mydata as select * from ... statement. This is called heterogeneous connectivity. This way you don't have to do anything in your .net application to move the data.

Another way is to use ODP.NET. In ODP.NET you can use the OracleBulkCopy-class.

But I don't think that inserting 160k records in an Oracle table with System.Data.OracleClient should take 25 minutes. I think you commit too many times. And do you bind your values to the insert statement with parameters or do you concatenate your values. Binding is much faster.

You can just use empty() - as seen in the documentation, it will return false if the variable has no value.

An example on that same page:

<?php
$var = 0;

// Evaluates to true because $var is empty
if (empty($var)) {
    echo '$var is either 0, empty, or not set at all';
}

// Evaluates as true because $var is set
if (isset($var)) {
    echo '$var is set even though it is empty';
}
?>

You can use isset if you just want to know if it is not NULL. Otherwise it seems empty() is just fine to use alone.

You can do something like this:

$ date +'%Y-%m-%d'

There are already a few good answers to this question, but for the sake of completeness I wanted to point out that the applicable section of the C standard is 5.1.2.2.3/15 (which is the same as section 1.9/9 in the C++11 standard). This section states that operators can only be regrouped if they are really associative or commutative.