How to logout and redirect to login page using Laravel 5.4?

If you used the auth scaffolding in 5.5 simply direct your href to:

{{ route('logout') }}

There is no need to alter any routes or controllers.

Running Tensorflow in Jupyter Notebook

I came up with your case. This is how I sort it out

Install Anaconda
Create a virtual environment - conda create -n tensor flow
Go inside your virtual environment - Source activate tensorflow
Inside that install tensorflow. You can install it using pip
Finish install

So then the next thing, when you launch it:

If you are not inside the virtual environment type - Source Activate Tensorflow
Then inside this again install your Jupiter notebook and Pandas libraries, because there can be some missing in this virtual environment

Inside the virtual environment just type:

pip install jupyter notebook
pip install pandas

Then you can launch jupyter notebook saying:

jupyter notebook
Select the correct terminal python 3 or 2
Then import those modules

Bootstrap 4 Center Vertical and Horizontal Alignment

This is working in IE 11 with Bootstrap 4.3. While the other answers were not working in IE11 in my case.

 <div class="row mx-auto justify-content-center align-items-center flex-column ">
    <div class="col-6">Something </div>
</div>

Error: Unexpected value 'undefined' imported by the module

I am building a components library and started getting this error in my app that is importing said library. When running ng build --prod or ng serve --aot in app I would get:

Unexpected value 'undefined' imported by the module '?m in node_modules/<library-name>/<library-name>.d.ts'

But no errors when using ng serve or when testing the modules in the library itself even when building in --prod.

Turns out I was misled by intellisense as well. For a few of my modules I had imported a sister module as

import { DesignModule } from '../../design';

instead of

import { DesignModule } from '../../design/design.module';

It worked in fine in all builds except the one I described.

This was terrible to pin down and I was lucky it didn't take me longer than it did. Hope this help someone.

Install php-zip on php 5.6 on Ubuntu

Try either

sudo apt-get install php-zip or
sudo apt-get install php5.6-zip

Then, you might have to restart your web server.

sudo service apache2 restart or
sudo service nginx restart

If you are installing on centos or fedora OS then use yum in place of apt-get. example:-

sudo yum install php-zip or sudo yum install php5.6-zip and sudo service httpd restart

How do I pass data to Angular routed components?

Some super smart person (tmburnell) that is not me suggests re-writing the route data:

let route = this.router.config.find(r => r.path === '/path');
route.data = { entity: 'entity' };
this.router.navigateByUrl('/path');

As seen here in the comments.

I hope someone will find this useful

Node.JS: Getting error : [nodemon] Internal watch failed: watch ENOSPC

On running node server shows Following Errors and solutions:

nodemon server.js

[nodemon] 1.17.2

[nodemon] to restart at any time, enter rs

[nodemon] watching: .

[nodemon] starting node server.js

[nodemon] Internal watch failed: watch /home/aurum304/jin ENOSPC

sudo pkill -f node

or

echo fs.inotify.max_user_watches=524288 | sudo tee -a /etc/sysctl.conf && sudo sysctl -p

Conda update failed: SSL error: [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed

according to @jreback here https://github.com/conda/conda/issues/1166

conda config --set ssl_verify false

will turn off this feature, e.g. here

Error:Execution failed for task ':app:transformClassesWithJarMergingForDebug'

In terminal execute in root project folder:

./gradlew clean

It helped me.

Deploying Maven project throws java.util.zip.ZipException: invalid LOC header (bad signature)

The solution for me was to run mvn with -X:

$ mvn package -X

Then look backwards through the output until you see the failure and then keep going until you see the last jar file that mvn tried to process:

...
... <<output ommitted>>
...
[DEBUG] Processing JAR /Users/snowch/.m2/repository/org/eclipse/jetty/jetty-server/9.2.15.v20160210/jetty-server-9.2.15.v20160210.jar
[INFO] ------------------------------------------------------------------------
[INFO] BUILD FAILURE
[INFO] ------------------------------------------------------------------------
[INFO] Total time: 3.607 s
[INFO] Finished at: 2017-10-04T14:30:13+01:00
[INFO] Final Memory: 23M/370M
[INFO] ------------------------------------------------------------------------
[ERROR] Failed to execute goal org.apache.maven.plugins:maven-shade-plugin:3.1.0:shade (default) on project kafka-connect-on-cloud-foundry: Error creating shaded jar: invalid LOC header (bad signature) -> [Help 1]
org.apache.maven.lifecycle.LifecycleExecutionException: Failed to execute goal org.apache.maven.plugins:maven-shade-plugin:3.1.0:shade (default) on project kafka-connect-on-cloud-foundry: Error creating shaded jar: invalid LOC header (bad signature)

Look at the last jar before it failed and remove that from the local repository, i.e.

$ rm -rf /Users/snowch/.m2/repository/org/eclipse/jetty/jetty-server/9.2.15.v20160210/

ASP.NET Web API : Correct way to return a 401/unauthorised response

Just return the following:

return Unauthorized();

Hadoop cluster setup - java.net.ConnectException: Connection refused

hduser@marta-komputer:/usr/local/hadoop$ jps

11696 ResourceManager

11842 NodeManager

11171 NameNode

11523 SecondaryNameNode

12167 Jps

Where is your DataNode? Connection refused problem might also be due to no active DataNode. Check datanode logs for issues.

UPDATED:

For this error:

15/03/01 00:59:34 INFO client.RMProxy: Connecting to ResourceManager at /0.0.0.0:8032 java.net.ConnectException: Call From marta-komputer.home/192.168.1.8 to marta-komputer:9000 failed on connection exception: java.net.ConnectException: Connection refused; For more details see: http://wiki.apache.org/hadoop/ConnectionRefused

Add these lines in yarn-site.xml:

<property>
<name>yarn.resourcemanager.address</name>
<value>192.168.1.8:8032</value>
</property>
<property>
<name>yarn.resourcemanager.scheduler.address</name>
<value>192.168.1.8:8030</value>
</property>
<property>
<name>yarn.resourcemanager.resource-tracker.address</name>
<value>192.168.1.8:8031</value>
</property>

Restart the hadoop processes.

Laravel 5 – Remove Public from URL

Problem is if you type /public and it will still be available in the url, therefor i created a fix which should be placed in the public/index.php

  $uri = urldecode(
     parse_url($_SERVER['REQUEST_URI'], PHP_URL_PATH)
  );

  if(stristr($uri, '/public/') == TRUE) {

    if(file_exists(__DIR__.'/public'.$uri)){

    }else{

      $actual_link = (isset($_SERVER['HTTPS']) && $_SERVER['HTTPS'] === 'on' ? "https" : "http") . "://{$_SERVER['HTTP_HOST']}{$_SERVER['REQUEST_URI']}";
      $actual_link = str_replace('public/', '',$actual_link);
      header("HTTP/1.0 404 Not Found");
      header("Location: ".$actual_link."");
      exit();
      return false;
   }}

this peace of code will remove public from the url and will give a 404 and then redirects to the url without the public

No connection could be made because the target machine actively refused it 127.0.0.1

There is a firewall blocking the connection or the process that is hosting the service is not listening on that port. Or it is listening on a different port.

Windows cannot find 'http:/.127.0.0.1:%HTTPPORT%/apex/f?p=4950'. Make sure you typed the name correctly, and then try again

Try out this url it is work for me

http://127.0.0.1:8080/apex/f?p=4950:1:1615033681376854

Windows->Services and restarted some of services(OracleJobSchedulerXE,OracleMTSRecoveryService,OracleServiceXE,OracleXEClrAgent,OracleXETNSListener) and it works for me.enter image description here

java.util.zip.ZipException: duplicate entry during packageAllDebugClassesForMultiDex

For me something similar happened when I had accidently added

apply plugin: 'kotlin-android'

to my android library module. Removing the line fixes the issue.

Laravel assets url

Besides put all your assets in the public folder, you can use the HTML::image() Method, and only needs an argument which is the path to the image, relative on the public folder, as well:

{{ HTML::image('imgs/picture.jpg') }}

Which generates the follow HTML code:

<img src="http://localhost:8000/imgs/picture.jpg">

The link to other elements of HTML::image() Method: http://laravel-recipes.com/recipes/185/generating-an-html-image-element

Node/Express file upload

Another option is to use multer, which uses busboy under the hood, but is simpler to set up.

var multer = require('multer');

Use multer and set the destination for the upload:

app.use(multer({dest:'./uploads/'}));

Create a form in your view, enctype='multipart/form-data is required for multer to work:

form(role="form", action="/", method="post", enctype="multipart/form-data")
    div(class="form-group")
        label Upload File
        input(type="file", name="myfile", id="myfile")

Then in your POST you can access the data about the file:

app.post('/', function(req, res) {
  console.dir(req.files);
});

A full tutorial on this can be found here.

File uploading with Express 4.0: req.files undefined

1) Make sure that your file is really sent from the client side. For example you can check it in Chrome Console: screenshot

2) Here is the basic example of NodeJS backend:

const express = require('express');
const fileUpload = require('express-fileupload');
const app = express();

app.use(fileUpload()); // Don't forget this line!

app.post('/upload', function(req, res) {
   console.log(req.files);
   res.send('UPLOADED!!!');
});

Could not load file or assembly 'Newtonsoft.Json' or one of its dependencies. Manifest definition does not match the assembly reference

By commenting it out this part on my web.config solved my problem:

<dependentAssembly>
    <assemblyIdentity name="Newtonsoft.Json" publicKeyToken="30ad4fe6b2a6aeed" culture="neutral" />
    <bindingRedirect oldVersion="0.0.0.0-6.0.0.0" newVersion="6.0.0.0" />
</dependentAssembly>

But of course you need to make sure you have updated or you have the right version by doing this in your package manager console:

update-package Newtonsoft.Json -reinstall

Name [jdbc/mydb] is not bound in this Context

For those who use Tomcat with Bitronix, this will fix the problem:

The error indicates that no handler could be found for your datasource 'jdbc/mydb', so you'll need to make sure your tomcat server refers to your bitronix configuration files as needed.

In case you're using btm-config.properties and resources.properties files to configure the datasource, specify these two JVM arguments in tomcat:

(if you already used them, make sure your references are correct):

btm.root
bitronix.tm.configuration

e.g.

-Dbtm.root="C:\Program Files\Apache Software Foundation\Tomcat 7.0.59" 
-Dbitronix.tm.configuration="C:\Program Files\Apache Software Foundation\Tomcat 7.0.59\conf\btm-config.properties"

Now, restart your server and check the log.

Wait until ActiveWorkbook.RefreshAll finishes - VBA

I had the same issue, however DoEvents didn't help me as my data connections had background-refresh enabled. Instead, using Wayne G. Dunn's answer as a jumping-off point, I created the following solution, which works just fine for me;

Sub Refresh_All_Data_Connections()

    For Each objConnection In ThisWorkbook.Connections
        'Get current background-refresh value
        bBackground = objConnection.OLEDBConnection.BackgroundQuery

        'Temporarily disable background-refresh
        objConnection.OLEDBConnection.BackgroundQuery = False

        'Refresh this connection
        objConnection.Refresh

        'Set background-refresh value back to original value
        objConnection.OLEDBConnection.BackgroundQuery = bBackground
    Next

    MsgBox "Finished refreshing all data connections"

End Sub

The MsgBox is for testing only and can be removed once you're happy the code waits.

Also, I prefer ThisWorkbook to ActiveWorkbook as I know it will target the workbook where the code resides, just in case focus changes. Nine times out of ten this won't matter, but I like to err on the side of caution.

EDIT: Just saw your edit about using an xlConnectionTypeXMLMAP connection which does not have a BackgroundQuery option, sorry. I'll leave the above for anyone (like me) looking for a way to refresh OLEDBConnection types.

onClick not working on mobile (touch)

you can use instead of click :

$('#whatever').on('touchstart click', function(){ /* do something... */ });

Cannot GET / Nodejs Error

If you are getting this error, it could be because you don't have a route defined for your get.

For example:

const express = require('express');

const app = express();

app.get('/people', function (req, res) {
    res.send('hello');
})

app.listen(3000);


http://http://localhost:3000/people --> this works
http://http://localhost:3000 --> this will output Cannot GET / message.

How to center the text in PHPExcel merged cell

<?php
    /** Error reporting */
    error_reporting(E_ALL);
    ini_set('display_errors', TRUE);
    ini_set('display_startup_errors', TRUE);
    date_default_timezone_set('Europe/London');

    /** Include PHPExcel */
    require_once '../Classes/PHPExcel.php';

    $objPHPExcel = new PHPExcel();
    $sheet = $objPHPExcel->getActiveSheet();
    $sheet->setCellValueByColumnAndRow(0, 1, "test");
    $sheet->mergeCells('A1:B1');
    $sheet->getActiveSheet()->getStyle('A1:B1')->getAlignment()->setHorizontal(PHPExcel_Style_Alignment::HORIZONTAL_CENTER);
    $objWriter = PHPExcel_IOFactory::createWriter($objPHPExcel, 'Excel2007');
    $objWriter->save("test.xlsx");
?>

What is a 'NoneType' object?

For the sake of defensive programming, objects should be checked against nullity before using.

if obj is None:

if obj is not None:

"An attempt was made to access a socket in a way forbidden by its access permissions" while using SMTP

Do this if you are using GoDaddy, I'm using Lets Encrypt SSL if you want you can get it.

Here is the code - The code is in asp.net core 2.0 but should work in above versions.

using System;
using System.Collections.Generic;
using System.Linq;
using System.Threading.Tasks;
using MailKit.Net.Smtp;
using MimeKit;

namespace UnityAssets.Website.Services
{
    public class EmailSender : IEmailSender
    {
        public async Task SendEmailAsync(string toEmailAddress, string subject, string htmlMessage)
        {
            var email = new MimeMessage();
            email.From.Add(new MailboxAddress("Application Name", "[email protected]"));
            email.To.Add(new MailboxAddress(toEmailAddress, toEmailAddress));
            email.Subject = subject;

            var body = new BodyBuilder
            {
                HtmlBody = htmlMessage
            };

            email.Body = body.ToMessageBody();

            using (var client = new SmtpClient())
            {
                //provider specific settings
                await client.ConnectAsync("smtp.gmail.com", 465, true).ConfigureAwait(false);
                await client.AuthenticateAsync("[email protected]", "sketchunity").ConfigureAwait(false);

                await client.SendAsync(email).ConfigureAwait(false);
                await client.DisconnectAsync(true).ConfigureAwait(false);
            }
        }
    }
}

SmtpException: Unable to read data from the transport connection: net_io_connectionclosed

For anyone who stumbles across this post looking for a solution and you've set up SMTP sendgrid via Azure.

The username is not the username you set up when you've created the sendgrid object in azure. To find your username;

Click on your sendgrid object in azure and click manage. You will be redirected to the SendGrid site.
Confirm your email and then copy down the username displayed there.. it's an automatically generated username.
Add the username from SendGrid into your SMTP settings in the web.config file.

Hope this helps!

Runtime error: Could not load file or assembly 'System.Web.WebPages.Razor, Version=3.0.0.0

I had this issue when I upgraded to v3.0.0.preview4, so a downgrade to a stable version fixed this.

PHPExcel How to apply styles and set cell width and cell height to cell generated dynamically

Try this:

$objPHPExcel->getActiveSheet()->getRowDimension('1')->setRowHeight(40);

laravel throwing MethodNotAllowedHttpException

I faced the error,
problem was FORM METHOD

{{ Form::open(array('url' => 'admin/doctor/edit/'.$doctor->doctor_id,'class'=>'form-horizontal form-bordered form-row-stripped','method' => 'PUT','files'=>true)) }}

It should be like this

{{ Form::open(array('url' => 'admin/doctor/edit/'.$doctor->doctor_id,'class'=>'form-horizontal form-bordered form-row-stripped','method' => 'POST','files'=>true)) }}

Could not load file or assembly 'System.Web.Http 4.0.0 after update from 2012 to 2013

I could solve similar problem with System.Net.HTTP by adding assembly reference in app.config of main application.

  <runtime>
    <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
      <dependentAssembly>
        <assemblyIdentity name="System.Net.Http" publicKeyToken="b03f5f7f11d50a3a" culture="neutral" />
        <bindingRedirect oldVersion="0.0.0.0-4.1.1.1" newVersion="4.0.0.0" />
      </dependentAssembly></runtime>

PHPExcel set border and format for all sheets in spreadsheet

To answer your extra question:

You can set which rows should be repeated on every page using:

$objPHPExcel->getActiveSheet()->getPageSetup()->setRowsToRepeatAtTopByStartAndEnd(1, 5);

Now, row 1, 2, 3, 4 and 5 will be repeated.

HTTP Status 500 - org.apache.jasper.JasperException: java.lang.NullPointerException

In Tomcat a .java and .class file will be created for every jsp files with in the application and the same can be found from the path below, Apache-Tomcat\work\Catalina\localhost\'ApplicationName'\org\apache\jsp\index_jsp.java

In your case the jsp name is error.jsp so the path should be something like below Apache-Tomcat\work\Catalina\localhost\'ApplicationName'\org\apache\jsp\error_jsp.java in line no 124 you are trying to access a null object which results in null pointer exception.

error : expected unqualified-id before return in c++

if (chapeau) {

You forgot the ending brace to this if statement, so the subsequent else if is considered a syntax error. You need to add the brace when the if statement body is complete:

if (chapeau) {
    cout << "le Professeur Violet";
}
else if (moustaches) {
    cout << "le Colonel Moutarde";
}
// ...

Exception of type 'System.OutOfMemoryException' was thrown.

Running in Debug Mode

When you're developing and debugging an application, you will typically run with the debug attribute in the web.config file set to true and your DLLs compiled in debug mode. However, before you deploy your application to test or to production, you should compile your components in release mode and set the debug attribute to false.

ASP.NET works differently on many levels when running in debug mode. In fact, when you are running in debug mode, the GC will allow your objects to remain alive longer (until the end of the scope) so you will always see higher memory usage when running in debug mode.

Another often unrealized side-effect of running in debug mode is that client scripts served via the webresource.axd and scriptresource.axd handlers will not be cached. That means that each client request will have to download any scripts (such as ASP.NET AJAX scripts) instead of taking advantage of client-side caching. This can lead to a substantial performance hit.

Source: http://blogs.iis.net/webtopics/archive/2009/05/22/troubleshooting-system-outofmemoryexceptions-in-asp-net.aspx

How to resume Fragment from BackStack if exists

Easier solution will be changing this line

ft.replace(R.id.content_frame, A); to ft.add(R.id.content_frame, A);

And inside your XML layout please use

  android:background="@color/white"
  android:clickable="true"
  android:focusable="true"

Clickable means that it can be clicked by a pointer device or be tapped by a touch device.

Focusable means that it can gain the focus from an input device like a keyboard. Input devices like keyboards cannot decide which view to send its input events to based on the inputs itself, so they send them to the view that has focus.

How to get current relative directory of your Makefile?

The shell function.

You can use shell function: current_dir = $(shell pwd). Or shell in combination with notdir, if you need not absolute path: current_dir = $(notdir $(shell pwd)).

Update.

Given solution only works when you are running make from the Makefile's current directory.
As @Flimm noted:

Note that this returns the current working directory, not the parent directory of the Makefile.
For example, if you run cd /; make -f /home/username/project/Makefile, the current_dir variable will be /, not /home/username/project/.

Code below will work for Makefiles invoked from any directory:

mkfile_path := $(abspath $(lastword $(MAKEFILE_LIST)))
current_dir := $(notdir $(patsubst %/,%,$(dir $(mkfile_path))))

PHP parse/syntax errors; and how to solve them

Unexpected '.'

This can occur if you are trying to use the splat operator(...) in an unsupported version of PHP.

... first became available in PHP 5.6 to capture a variable number of arguments to a function:

function concatenate($transform, ...$strings) {
    $string = '';
    foreach($strings as $piece) {
        $string .= $piece;
    }
    return($transform($string));
}

echo concatenate("strtoupper", "I'd ", "like ", 4 + 2, " apples");
// This would print:
// I'D LIKE 6 APPLES

In PHP 7.4, you could use it for Array expressions.

$parts = ['apple', 'pear'];
$fruits = ['banana', 'orange', ...$parts, 'watermelon'];
// ['banana', 'orange', 'apple', 'pear', 'watermelon'];

Specified argument was out of the range of valid values. Parameter name: site

I got this issue when trying to run a project targeting Framework 4.5 in VS2017. After changing it to Framework 4.6.X it got fixed by itself.

Set Font Color, Font Face and Font Size in PHPExcel

I recommend you start reading the documentation (4.6.18. Formatting cells). When applying a lot of formatting it's better to use applyFromArray() According to the documentation this method is also suppose to be faster when you're setting many style properties. There's an annex where you can find all the possible keys for this function.

This will work for you:

$phpExcel = new PHPExcel();

$styleArray = array(
    'font'  => array(
        'bold'  => true,
        'color' => array('rgb' => 'FF0000'),
        'size'  => 15,
        'name'  => 'Verdana'
    ));

$phpExcel->getActiveSheet()->getCell('A1')->setValue('Some text');
$phpExcel->getActiveSheet()->getStyle('A1')->applyFromArray($styleArray);

To apply font style to complete excel document:

 $styleArray = array(
   'font'  => array(
        'bold'  => true,
        'color' => array('rgb' => 'FF0000'),
        'size'  => 15,
        'name'  => 'Verdana'
    ));      
 $phpExcel->getDefaultStyle()
    ->applyFromArray($styleArray);

PHPExcel - set cell type before writing a value in it

I wanted the Number same as I get from database for example.

1) 00100.220000

2) 00123

3) 0000.0000100

So I modified the code as below

$objPHPExcel->getActiveSheet()
    ->setCellValue('A3', '00100.220000');
$objPHPExcel->getActiveSheet()
    ->getStyle('A3')
    ->getNumberFormat()
    ->setFormatCode('00000.000000');


$objPHPExcel->getActiveSheet()
    ->setCellValue('A4', '00123');
$objPHPExcel->getActiveSheet()
  ->getStyle('A4')
 ->getNumberFormat()
->setFormatCode('00000');


$objPHPExcel->getActiveSheet()
    ->setCellValue('A5', '0000.0000100');
$objPHPExcel->getActiveSheet()
  ->getStyle('A5')
 ->getNumberFormat()
->setFormatCode('0000.0000000');

PHPExcel auto size column width

This code snippet will auto size all the columns that contain data in all the sheets. There is no need to use the activeSheet getter and setter.

// In my case this line didn't make much of a difference
PHPExcel_Shared_Font::setAutoSizeMethod(PHPExcel_Shared_Font::AUTOSIZE_METHOD_EXACT);
// Iterating all the sheets
/** @var PHPExcel_Worksheet $sheet */
foreach ($objPHPExcel->getAllSheets() as $sheet) {
    // Iterating through all the columns
    // The after Z column problem is solved by using numeric columns; thanks to the columnIndexFromString method
    for ($col = 0; $col <= PHPExcel_Cell::columnIndexFromString($sheet->getHighestDataColumn()); $col++) {
        $sheet->getColumnDimensionByColumn($col)->setAutoSize(true);
    }
}

How do I set up DNS for an apex domain (no www) pointing to a Heroku app?

You are not allowed to have a CNAME record for the domain, as the CNAME is an aliasing feature that covers all data types (regardless of whether the client looks for MX, NS or SOA records). CNAMEs also always refer to a new name, not an ip-address, so there are actually two errors in the single line

@                        IN CNAME   88.198.38.XXX

Changing that CNAME to an A record should make it work, provided the ip-address you use is the correct one for your Heroku app.

The only correct way in DNS to make a simple domain.com name work in the browser, is to point the domain to an IP-adress with an A record.

Read Content from Files which are inside Zip file

If you're wondering how to get the file content from each ZipEntry it's actually quite simple. Here's a sample code:

public static void main(String[] args) throws IOException {
    ZipFile zipFile = new ZipFile("C:/test.zip");

    Enumeration<? extends ZipEntry> entries = zipFile.entries();

    while(entries.hasMoreElements()){
        ZipEntry entry = entries.nextElement();
        InputStream stream = zipFile.getInputStream(entry);
    }
}

Once you have the InputStream you can read it however you want.

Eclipse will not start and I haven't changed anything

I used eclipse -clean -clearPersistedState and that worked for me. You will lose your window layout configuration, but that seems minor to me.

For Linux systems try: ./eclipse -clean -clearPersistedState

See Eclipse JUNO doesn't start

SFTP file transfer using Java JSch

Usage:

sftp("file:/C:/home/file.txt", "ssh://user:pass@host/home");
sftp("ssh://user:pass@host/home/file.txt", "file:/C:/home");

Implementation

PHPExcel Make first row bold

$objPHPExcel->getActiveSheet()->getStyle('1:1')->getFont()->setBold(true);

That way you get the complete first row

Could not load type 'System.Runtime.CompilerServices.ExtensionAttribute' from assembly 'mscorlib

In my case I had an issue around using Microsoft.ReportViewer.WebForms. I removed validate=true from add verb line in web.config and it started working:

<system.web>
    <httpHandlers>
      <add verb="*" path="Reserved.ReportViewerWebControl.axd" type="Microsoft.Reporting.WebForms.HttpHandler, Microsoft.ReportViewer.WebForms, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />

javascript set cookie with expire time

Here's a function I wrote another application. Feel free to reuse:

function writeCookie (key, value, days) {
    var date = new Date();

    // Default at 365 days.
    days = days || 365;

    // Get unix milliseconds at current time plus number of days
    date.setTime(+ date + (days * 86400000)); //24 * 60 * 60 * 1000

    window.document.cookie = key + "=" + value + "; expires=" + date.toGMTString() + "; path=/";

    return value;
};

Error Microsoft.Web.Infrastructure, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35

It appears that Microsoft.Web.Infrastructure.dll is not being installed in the GAC, even if .net (4.0 or 4.5 or other) are installed successfully on Windows Server. On localhost (typically Windows client), it seems like it is being in the GAC when the tools/platform (Visual Studio etc.) are installed.

As one possible fix, please try the following:

Run the following command in the Package Manager Console. (If you are using Visual Studio, this can be reached via menu options "Tools --> Library Package Manager --> Package Manager Console:)
```
PM> Install-Package Microsoft.Web.Infrastructure
```
You will see the following messages if it is successfully installed.
```
Successfully installed 'Microsoft.Web.Infrastructure 1.0.0.0'.
Successfully added 'Microsoft.Web.Infrastructure 1.0.0.0' to Web.
```
You will notice that Microsoft.Web.Infrastructure.dll has now been added as a Reference (can be seen in the references folder of your project in in Solution Explorer)
If you look at the properties of this reference you will notice that "Copy Local" has been set to "True" by default.
Now when you "Publish " your project, Microsoft.Web.Infrastructure.dll will be deployed.

How to export data to an excel file using PHPExcel

I currently use this function in my project after a series of googling to download excel file from sql statement

    // $sql = sql query e.g "select * from mytablename"
    // $filename = name of the file to download 
        function queryToExcel($sql, $fileName = 'name.xlsx') {
                // initialise excel column name
                // currently limited to queries with less than 27 columns
        $columnArray = array("A", "B", "C", "D", "E", "F", "G", "H", "I", "J", "K", "L", "M", "N", "O", "P", "Q", "R", "S", "T", "U", "V", "W", "X", "Y", "Z");
                // Execute the database query
                $result =  mysql_query($sql) or die(mysql_error());

                // Instantiate a new PHPExcel object
                $objPHPExcel = new PHPExcel();
                // Set the active Excel worksheet to sheet 0
                $objPHPExcel->setActiveSheetIndex(0);
                // Initialise the Excel row number
                $rowCount = 1;
    // fetch result set column information
                $finfo = mysqli_fetch_fields($result);
// initialise columnlenght counter                
$columnlenght = 0;
                foreach ($finfo as $val) {
// set column header values                   
  $objPHPExcel->getActiveSheet()->SetCellValue($columnArray[$columnlenght++] . $rowCount, $val->name);
                }
// make the column headers bold
                $objPHPExcel->getActiveSheet()->getStyle($columnArray[0]."1:".$columnArray[$columnlenght]."1")->getFont()->setBold(true);

                $rowCount++;
                // Iterate through each result from the SQL query in turn
                // We fetch each database result row into $row in turn

                while ($row = mysqli_fetch_array($result, MYSQL_NUM)) {
                    for ($i = 0; $i < $columnLenght; $i++) {
                        $objPHPExcel->getActiveSheet()->SetCellValue($columnArray[$i] . $rowCount, $row[$i]);
                    }
                    $rowCount++;
                }
// set header information to force download
                header('Content-type: application/vnd.ms-excel');
                header('Content-Disposition: attachment; filename="' . $fileName . '"');
                // Instantiate a Writer to create an OfficeOpenXML Excel .xlsx file        
                // Write the Excel file to filename some_excel_file.xlsx in the current directory                
                $objWriter = new PHPExcel_Writer_Excel2007($objPHPExcel); 
                // Write the Excel file to filename some_excel_file.xlsx in the current directory
                $objWriter->save('php://output');
            }

The module was expected to contain an assembly manifest

I got the error in the following case:

A .NET EXE file (#1) was referencing another .NET EXE file (#2)
I was trying to obfuscate EXE #2 with Themida
when running the EXE #1 it was crashing with the error "The module was expected to contain an assembly manifest"

I simply avoided the obfuscation and the error is gone. not a real solution, but at least I know what caused it...

Generate insert script for selected records?

I ended up doing this in 2 steps. Selected the records I want into a new table in the database then generated a SQL data only script in SSMS. I did find and replace on the generated script and removed the table.

AppFabric installation failed because installer MSI returned with error code : 1603

So, I was having the same issue. The main reason I am installing Appfabric is to create a SharePoint 2013 development server.
What did not work:

Updating the Environmental Variable PSModulePath - did not work. Still recieved the 1603 error after running the setup agian.
tried to find the registry entries. Could not find them.

What worked for me to get Appfrabic installed was installing from the setup file via powershell. Woo hoo! It worked for me! This is the link I retrieved the commands from: Installing AppFabric 1.1 with PowerShell DSC results in modal dialog error

        Start-Process -FilePath 'c:\temp\SharePoint\pre\appfabric\setup.exe' -ArgumentList '/i cacheclient","cachingService","CacheAdmin /gac /l c:\temp\appfabric.log' -Wait | Write-verbose
        Start-Process -FilePath 'c:\temp\SharePoint\pre\AppFabric1.1-RTM-KB2671763-x64-ENU.exe' -ArgumentList '/quiet' -Wait | Write-verbose

I hope this helps others with the same issue.

How to enable cross-origin resource sharing (CORS) in the express.js framework on node.js

One additional step I needed to take was to switch my URL from http://localhost to http://127.0.0.0

Could not load file or assembly 'System.Web.WebPages.Razor, Version=2.0.0.0

After much pain, googling and hair pulling, I ended up uninstalling MVC 4 using nuget, deleting all references to MVC, razor and infrastructure from the web config, deleting the dlls from the bin folder - then using nuget to reinstall everything. It took less time then trying to figure out why the dlls did not match.

Operation is not valid due to the current state of the object, when I select a dropdown list

From http://codecorner.galanter.net/2012/06/04/solution-for-operation-is-not-valid-due-to-the-current-state-of-the-object-error/

Issue happens because Microsoft Security Update MS11-100 limits number of keys in Forms collection during HTTP POST request. To alleviate this problem you need to increase that number.

This can be done in your application Web.Config in the <appSettings> section (create the section directly under <configuration> if it doesn’t exist). Add 2 lines similar to the lines below to the section:
<add key="aspnet:MaxHttpCollectionKeys" value="2000" />
<add key="aspnet:MaxJsonDeserializerMembers" value="2000" />
The above example set the limit to 2000 keys. This will lift the limitation and the error should go away.

How to convert image into byte array and byte array to base64 String in android?

here is another solution...

System.IO.Stream st = new System.IO.StreamReader (picturePath).BaseStream;
byte[] buffer = new byte[4096];

System.IO.MemoryStream m = new System.IO.MemoryStream ();
while (st.Read (buffer,0,buffer.Length) > 0) {
    m.Write (buffer, 0, buffer.Length);
}  
imgView.Tag = m.ToArray ();
st.Close ();
m.Close ();

hope it helps!

Error: Failed to lookup view in Express

This error really just has to do with the file Path,thats all you have to check,for me my parent folder was "Layouts" but my actual file was layout.html,my path had layouts on both,once i corrected that error was gone.

How to send an email with Gmail as provider using Python?

There is a gmail API now, which lets you send email, read email and create drafts via REST. Unlike the SMTP calls, it is non-blocking which can be a good thing for thread-based webservers sending email in the request thread (like python webservers). The API is also quite powerful.

Of course, email should be handed off to a non-webserver queue, but it's nice to have options.

It's easiest to setup if you have Google Apps administrator rights on the domain, because then you can give blanket permission to your client. Otherwise you have to fiddle with OAuth authentication and permission.

Here is a gist demonstrating it:

https://gist.github.com/timrichardson/1154e29174926e462b7a

Shell Script Syntax Error: Unexpected End of File

Edit: Note that the original post has been edited since this answer was written and has been reformatted. You should look at the history to see the original formatting to understand the context for this answer.

This error occurs often when you have mismatched structure - that is, you do not have matching double quotes, matching single quotes, have not closed a control structure such as a missing fi with an if, or a missing done with a for.

The best way to spot these is to use correct indentation, which will show you where you have a broken control structure, and syntax highlighting, which will show you where quotes are not matched.

In this particular case, I can see you are missing a fi. In the latter part of your code, you have 5 ifs and 4 fis. However you also have a number of other problems - your backquoted touch /tmp/alert.txt... command is syntactically invalid, and you need a space before the closing bracket of an if test.

Clean up your code, and errors start to stand out.

PHPExcel - creating multiple sheets by iteration

Complementing the coment of @Mark Baker.
Do as follow:

$titles = array('title 1', 'title 2');
$sheet = 0;
foreach($array as $value){
    if($sheet > 0){
        $objPHPExcel->createSheet();
        $sheet = $objPHPExcel->setActiveSheetIndex($sheet);
        $sheet->setTitle("$value");
        //Do you want something more here
    }else{
        $objPHPExcel->setActiveSheetIndex(0)->setTitle("$value");
    }
    $sheet++;
}

This worked for me. And hope it works for those who need! :)

How to use phpexcel to read data and insert into database?

Using the PHPExcel library to read an Excel file and transfer the data into a database

//  Include PHPExcel_IOFactory
include 'PHPExcel/IOFactory.php';

$inputFileName = './sampleData/example1.xls';

//  Read your Excel workbook
try {
    $inputFileType = PHPExcel_IOFactory::identify($inputFileName);
    $objReader = PHPExcel_IOFactory::createReader($inputFileType);
    $objPHPExcel = $objReader->load($inputFileName);
} catch(Exception $e) {
    die('Error loading file "'.pathinfo($inputFileName,PATHINFO_BASENAME).'": '.$e->getMessage());
}

//  Get worksheet dimensions
$sheet = $objPHPExcel->getSheet(0); 
$highestRow = $sheet->getHighestRow(); 
$highestColumn = $sheet->getHighestColumn();

//  Loop through each row of the worksheet in turn
for ($row = 1; $row <= $highestRow; $row++){ 
    //  Read a row of data into an array
    $rowData = $sheet->rangeToArray('A' . $row . ':' . $highestColumn . $row,
                                    NULL,
                                    TRUE,
                                    FALSE);
    //  Insert row data array into your database of choice here
}

Anything more becomes very dependent on your database, and how you want the data structured in it

Path of assets in CSS files in Symfony 2

The cssrewrite filter is not compatible with the @bundle notation for now. So you have two choices:

Reference the CSS files in the web folder (after: console assets:install --symlink web)
```
{% stylesheets '/bundles/myCompany/css/*." filter="cssrewrite" %}
```

Use the cssembed filter to embed images in the CSS like this.

{% stylesheets '@MyCompanyMyBundle/Resources/assets/css/*.css' filter="cssembed" %}

A potentially dangerous Request.Form value was detected from the client

Use the Server.HtmlEncode("yourtext");

How to pass variable from jade template file to a script file?

See this question: JADE + EXPRESS: Iterating over object in inline JS code (client-side)?

I'm having the same problem. Jade does not pass local variables in (or do any templating at all) to javascript scripts, it simply passes the entire block in as literal text. If you use the local variables 'address' and 'port' in your Jade file above the script tag they should show up.

Possible solutions are listed in the question I linked to above, but you can either: - pass every line in as unescaped text (!= at the beginning of every line), and simply put "-" before every line of javascript that uses a local variable, or: - Pass variables in through a dom element and access through JQuery (ugly)

Is there no better way? It seems the creators of Jade do not want multiline javascript support, as shown by this thread in GitHub: https://github.com/visionmedia/jade/pull/405

Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. The statement has been terminated

Also you need to check if individual record is not getting updated in the logic because with update trigger in the place causes time out error too.

So, the solution is to make sure you perform bulk update after the loop/cursor instead of one record at a time in the loop.

phpexcel to download

FOR XLSX USE

SET IN $xlsName name from XLSX with extension. Example: $xlsName = 'teste.xlsx';

$objPHPExcel = new PHPExcel();

$objWriter = PHPExcel_IOFactory::createWriter($objPHPExcel, 'Excel2007');
header('Content-Type: application/vnd.ms-excel');
header('Content-Disposition: attachment;filename="'.$xlsName.'"');
header('Cache-Control: max-age=0');
$objWriter->save('php://output');

FOR XLS USE

SET IN $xlsName name from XLS with extension. Example: $xlsName = 'teste.xls';

$objPHPExcel = new PHPExcel();

$objWriter = PHPExcel_IOFactory::createWriter($objPHPExcel, 'Excel5');
header('Content-Type: application/vnd.ms-excel');
header('Content-Disposition: attachment;filename="'.$xlsName.'"');
header('Cache-Control: max-age=0');
$objWriter->save('php://output');

How to solve error message: "Failed to map the path '/'."

It could be due to data in your web.config file. E.g. a backslash in a domain username.

userName='domain\user'.

Merge Cell values with PHPExcel - PHP

Try this

$objPHPExcel->getActiveSheet()->mergeCells('A1:C1');

Setting width of spreadsheet cell using PHPExcel

This worked for me:

$objPHPExcel->getActiveSheet()->getColumnDimension('C')->setAutoSize(false);
$objPHPExcel->getActiveSheet()->getColumnDimension('C')->setWidth(10);

be sure to add setAuzoSize(false), before the setWidth(); as Rolland mentioned

Set Background cell color in PHPExcel

This always running!

$sheet->getActiveSheet()->getStyle('A1')->getFill()->getStartColor()->setRGB('FF0000');

ExpressJS How to structure an application?

The following is Peter Lyons' answer verbatim, ported over to vanilla JS from Coffeescript, as requested by several others. Peter's answer is very able, and anyone voting on my answer should vote on his as well.

Config

What you are doing is fine. I like to have my own config namespace set up in a top-level config.js file with a nested namespace like this.

// Set the current environment to true in the env object
var currentEnv = process.env.NODE_ENV || 'development';
exports.appName = "MyApp";
exports.env = {
  production: false,
  staging: false,
  test: false,
  development: false
};  
exports.env[currentEnv] = true;
exports.log = {
  path: __dirname + "/var/log/app_#{currentEnv}.log"
};  
exports.server = {
  port: 9600,
  // In staging and production, listen loopback. nginx listens on the network.
  ip: '127.0.0.1'
};  
if (currentEnv != 'production' && currentEnv != 'staging') {
  exports.enableTests = true;
  // Listen on all IPs in dev/test (for testing from other machines)
  exports.server.ip = '0.0.0.0';
};
exports.db {
  URL: "mongodb://localhost:27017/#{exports.appName.toLowerCase()}_#{currentEnv}"
};

This is friendly for sysadmin editing. Then when I need something, like the DB connection info, it`s

require('./config').db.URL

Routes/Controllers

I like to leave my routes with my controllers and organize them in an app/controllers subdirectory. Then I can load them up and let them add whatever routes they need.

In my app/server.js javascript file I do:

[
  'api',
  'authorization',
  'authentication',
  'domains',
  'users',
  'stylesheets',
  'javascripts',
  'tests',
  'sales'
].map(function(controllerName){
  var controller = require('./controllers/' + controllerName);
  controller.setup(app);
});

So I have files like:

app/controllers/api.js
app/controllers/authorization.js
app/controllers/authentication.js
app/controllers/domains.js

And for example in my domains controller, I have a setup function like this.

exports.setup = function(app) {
  var controller = new exports.DomainController();
  var route = '/domains';
  app.post(route, controller.create);
  app.put(route, api.needId);
  app.delete(route, api.needId);
  route = '/domains/:id';
  app.put(route, controller.loadDomain, controller.update);
  app.del(route, controller.loadDomain, function(req, res){
    res.sendJSON(req.domain, status.OK);
  });
}

Views

Putting views in app/views is becoming the customary place. I lay it out like this.

app/views/layout.jade
app/views/about.jade
app/views/user/EditUser.jade
app/views/domain/EditDomain.jade

Static Files

Go in a public subdirectory.

Github/Semver/NPM

Put a README.md markdown file at your git repo root for github.

Put a package.json file with a semantic version number in your git repo root for NPM.

Convert Word doc, docx and Excel xls, xlsx to PDF with PHP

Another way to do this, is using directly a parameter on the libreoffice command:

libreoffice --convert-to pdf /path/to/file.{doc,docx}

---- ---- ---- ---- ---- ---- Explanation ---- ---- ---- ---- ---- ----

First you need to download and install LibreOffice. Can be downloaded from Here
Now open your terminal / command prompt then go to libreOffice root, for windows it may be OS/Program Files/LibreOffice/program here you'll find an executable soffice.exe

Here you can convert it directly by the above mentioned commands or you may also use :
soffice in place of libreoffice

How to change Java version used by TOMCAT?

In Eclipse it is very easy to point Tomcat to a new JVM (in this example JRE6). My problem was I couldn't find where to do it. Here is the trick:

On the ECLIPSE top menu FILE pull down tab, select NEW, -->Other
...on the New Server: Select A Wizard window, select: Server-> Server... click NEXT
. on the New Server: Define a New Server window, select Apache> Tomcat 7 Server
..now click the line in blue and underlined entitled: Configure Runtime Environments
on the Server Runtime Environments window,
..select Apache, expand it(click on the arrow to the left), select TOMCAT v7.0, and click EDIT.
you will see a window called EDIT SERVER RUNTIME ENVIRONMENT: TOMCAT SERVER
On this screen there is a pulldown labeled JREs.
You should find your JRE listed like JRE1.6.0.33. If not use the Installed JRE button.
Select the desired JRE. Click the FINISH button.
Gracefully exit, in the Server: Server Runtime Environments window, click OK
in the New Server: Define a new Server window, hit NEXT
in the New Server: Add and Remove Window, select apps and install them on the server.
in the New Server: Add and Remove Window, click Finish

That's all. Interesting, only steps 7-10 seem to matter, and they will change the JRE used on all servers you have previously defined to use TOMCAT v7.0. The rest of the steps are just because I can't find any other way to get to the screen except by defining a new server. Does anyone else know an easier way?

How to use Python's "easy_install" on Windows ... it's not so easy

For one thing, it says you already have that module installed. If you need to upgrade it, you should do something like this:

easy_install -U packageName

Of course, easy_install doesn't work very well if the package has some C headers that need to be compiled and you don't have the right version of Visual Studio installed. You might try using pip or distribute instead of easy_install and see if they work better.

Class is inaccessible due to its protection level

I'm guessing public Method AddMethod(string aName) is defined on a public interface that FBlock implements. Consumers of that interface are not guaranteed to have access to Method.

Python base64 data decode

Interesting if maddening puzzle...but here's the best I could get:

The data seems to repeat every 8 bytes or so.

import struct
import base64

target = \
r'''Q5YACgAAAABDlgAbAAAAAEOWAC0AAAAAQ5YAPwAAAABDlgdNAAAAAEOWB18AAAAAQ5YH 
[snip.]
ZAAAAABExxniAAAAAETH/rQAAAAARMf/MwAAAABEx/+yAAAAAETIADEAAAAA''' 

data = base64.b64decode(target)

cleaned_data = []
struct_format = ">ff"
for i in range(len(data) // 8):
   cleaned_data.append(struct.unpack_from(struct_format, data, 8*i))

That gives output like the following (a sampling of lines from the first 100 or so):

(300.00030517578125, 0.0)
(300.05975341796875, 241.93943786621094)
(301.05612182617187, 0.0)
(301.05667114257812, 8.7439727783203125)
(326.9617919921875, 0.0)
(326.96826171875, 0.0)
(328.34432983398438, 280.55218505859375)

That first number does seem to monotonically increase through the entire set. If you plot it:

import matplotlib.pyplot as plt
f, ax = plt.subplots()
ax.plot(*zip(*cleaned_data))

format = 'hhhh' (possibly with various paddings/directions (e.g. '<hhhh', '<xhhhh') also might be worth a look (again, random lines):

(-27069, 2560, 0, 0)
(-27069, 8968, 0, 0)
(-27069, 13576, 3139, -18487)
(-27069, 18184, 31043, -5184)
(-27069, -25721, -25533, -8601)
(-27069, -7289, 0, 0)
(-25533, 31066, 0, 0)
(-25533, -29350, 0, 0)
(-25533, 25179, 0, 0)
(-24509, -1888, 0, 0)
(-24509, -4447, 0, 0)
(-23741, -14725, 32067, 27475)
(-23741, -3973, 0, 0)
(-23485, 4908, -29629, -20922)

TCPDF not render all CSS properties

I recently ran into the same problem, and found a workaround though it'll only be useful if you can change the html code to suit.

I used tables to achieve my padded layout, so to create the equivalent of a div with internal padding I made a table with 3 columns/3 rows and put the content in the centre row/column. The first and last columns/rows are used for the padding.

eg.

<table>
<tr>
    <td width="10">&nbsp;</td>
    <td>&nbsp;</td>
    <td width="10">&nbsp;</td>
</tr>
<tr>
    <td>&nbsp;</td>
    <td>content goes here</td>
    <td>&nbsp;</td>
</tr>
<tr>
    <td width="10">&nbsp;</td>
    <td>&nbsp;</td>
    <td width="10">&nbsp;</td>
</tr>
</table>

Hope that helps.

Joe

IF EXIST C:\directory\ goto a else goto b problems windows XP batch files

There's an ELSE in the DOS batch language? Back in the days when I did more of this kinda thing, there wasn't.

If my theory is correct and your ELSE is being ignored, you may be better off doing

IF NOT EXIST file GOTO label

...which will also save you a line of code (the one right after your IF).

Second, I vaguely remember some kind of bug with testing for the existence of directories. Life would be easier if you could test for the existence of a file in that directory. If there's no file you can be sure of, something to try (this used to work up to Win95, IIRC) would be to append the device file name NUL to your directory name, e.g.

IF NOT EXIST C:\dir\NUL GOTO ...

How should I escape strings in JSON?

The methods here that show the actual implementation are all faulty.
I don't have Java code, but just for the record, you could easily convert this C#-code:

Courtesy of the mono-project @ https://github.com/mono/mono/blob/master/mcs/class/System.Web/System.Web/HttpUtility.cs

public static string JavaScriptStringEncode(string value, bool addDoubleQuotes)
{
    if (string.IsNullOrEmpty(value))
        return addDoubleQuotes ? "\"\"" : string.Empty;

    int len = value.Length;
    bool needEncode = false;
    char c;
    for (int i = 0; i < len; i++)
    {
        c = value[i];

        if (c >= 0 && c <= 31 || c == 34 || c == 39 || c == 60 || c == 62 || c == 92)
        {
            needEncode = true;
            break;
        }
    }

    if (!needEncode)
        return addDoubleQuotes ? "\"" + value + "\"" : value;

    var sb = new System.Text.StringBuilder();
    if (addDoubleQuotes)
        sb.Append('"');

    for (int i = 0; i < len; i++)
    {
        c = value[i];
        if (c >= 0 && c <= 7 || c == 11 || c >= 14 && c <= 31 || c == 39 || c == 60 || c == 62)
            sb.AppendFormat("\\u{0:x4}", (int)c);
        else switch ((int)c)
            {
                case 8:
                    sb.Append("\\b");
                    break;

                case 9:
                    sb.Append("\\t");
                    break;

                case 10:
                    sb.Append("\\n");
                    break;

                case 12:
                    sb.Append("\\f");
                    break;

                case 13:
                    sb.Append("\\r");
                    break;

                case 34:
                    sb.Append("\\\"");
                    break;

                case 92:
                    sb.Append("\\\\");
                    break;

                default:
                    sb.Append(c);
                    break;
            }
    }

    if (addDoubleQuotes)
        sb.Append('"');

    return sb.ToString();
}

This can be compacted into

    // https://github.com/mono/mono/blob/master/mcs/class/System.Json/System.Json/JsonValue.cs
public class SimpleJSON
{

    private static  bool NeedEscape(string src, int i)
    {
        char c = src[i];
        return c < 32 || c == '"' || c == '\\'
            // Broken lead surrogate
            || (c >= '\uD800' && c <= '\uDBFF' &&
                (i == src.Length - 1 || src[i + 1] < '\uDC00' || src[i + 1] > '\uDFFF'))
            // Broken tail surrogate
            || (c >= '\uDC00' && c <= '\uDFFF' &&
                (i == 0 || src[i - 1] < '\uD800' || src[i - 1] > '\uDBFF'))
            // To produce valid JavaScript
            || c == '\u2028' || c == '\u2029'
            // Escape "</" for <script> tags
            || (c == '/' && i > 0 && src[i - 1] == '<');
    }



    public static string EscapeString(string src)
    {
        System.Text.StringBuilder sb = new System.Text.StringBuilder();

        int start = 0;
        for (int i = 0; i < src.Length; i++)
            if (NeedEscape(src, i))
            {
                sb.Append(src, start, i - start);
                switch (src[i])
                {
                    case '\b': sb.Append("\\b"); break;
                    case '\f': sb.Append("\\f"); break;
                    case '\n': sb.Append("\\n"); break;
                    case '\r': sb.Append("\\r"); break;
                    case '\t': sb.Append("\\t"); break;
                    case '\"': sb.Append("\\\""); break;
                    case '\\': sb.Append("\\\\"); break;
                    case '/': sb.Append("\\/"); break;
                    default:
                        sb.Append("\\u");
                        sb.Append(((int)src[i]).ToString("x04"));
                        break;
                }
                start = i + 1;
            }
        sb.Append(src, start, src.Length - start);
        return sb.ToString();
    }
}

Can I disable a CSS :hover effect via JavaScript?

I would use CSS to prevent the :hover event from changing the appearance of the link.

a{
  font:normal 12px/15px arial,verdana,sans-serif;
  color:#000;
  text-decoration:none;
}

This simple CSS means that the links will always be black and not underlined. I cannot tell from the question whether the change in the appearance is the only thing you want to control.

How to correctly set the ORACLE_HOME variable on Ubuntu 9.x?

You have to set LANG as well, look for files named 'sp1*.msb', and set for instance export LANG=us if you find a file name sp1us.msb. The error message could sure be better :)

PHPExcel how to set cell value dynamically

I don't have much experience working with php but from a logic standpoint this is what I would do.

Loop through your result set from MySQL
In Excel you should already know what A,B,C should be because those are the columns and you know how many columns you are returning.
The row number can just be incremented with each time through the loop.

Below is some pseudocode illustrating this technique:

    for (int i = 0; i < MySQLResults.count; i++){
         $objPHPExcel->getActiveSheet()->setCellValue('A' . (string)(i + 1), MySQLResults[i].name); 
        // Add 1 to i because Excel Rows start at 1, not 0, so row will always be one off
         $objPHPExcel->getActiveSheet()->setCellValue('B' . (string)(i + 1), MySQLResults[i].number);
         $objPHPExcel->getActiveSheet()->setCellValue('C' . (string)(i + 1), MySQLResults[i].email);
    }

How to compile and run C files from within Notepad++ using NppExec plugin?

In windows if you are using a portable version of MinGW you must set path variable or you have error libintl-8.dll not found. My path is C:\Program Files (x86)\CodeBlocks\MinGW\bin

Server cannot set status after HTTP headers have been sent IIS7.5

We were getting the same error - so this may be useful to some.

For us the cause was super simple. An interface change confused an end user and they were pressing the back button in the browser at a 'bad' time after a form submission (sure we should probably have used a PRG pattern, but we didn't).

We fixed the issue and the user is no longer pressing the back button. Problem solved.

Cannot use a leading ../ to exit above the top directory

You have an image or a favicon link of the style ="../" somewhere, that if the "../" were valid, would go beyond the top of the site, like this:

Image:

http://example.com/Images/test.jpg

Page

http://example.com/Pages/test.aspx

Valid on that page: ../Images/test.jpg
Would throw an error: ../../Images/test.jpg

How do I prevent people from doing XSS in Spring MVC?

When you are trying to prevent XSS, it's important to think of the context. As an example how and what to escape is very different if you are ouputting data inside a variable in a javascript snippet as opposed to outputting data in an HTML tag or an HTML attribute.

I have an example of this here: http://erlend.oftedal.no/blog/?blogid=91

Also checkout the OWASP XSS Prevention Cheat Sheet: http://www.owasp.org/index.php/XSS_%28Cross_Site_Scripting%29_Prevention_Cheat_Sheet

So the short answer is, make sure you escape output like suggested by Tendayi Mawushe, but take special care when you are outputting data in HTML attributes or javascript.

getOutputStream() has already been called for this response

The issue here is that your JSP is talking directly to the response OutputStream. This technically isn't forbidden, but it's very much not a good idea.

Specifically, you call response.getOutputStream() and write data to that. Later, when the JSP engine tries to flush the response, it fails because your code has already "claimed" the response. An application can either call getOutputStream or getWriter on any given response, it's not allowed to do both. JSP engines use getWriter, and so you cannot call getOutputStream.

You should be writing this code as a Servlet, not a JSP. JSPs are only really suitable for textual output as contained in the JSP. You can see that there's no actual text output in your JSP, it only contains java.

Could not load file or assembly 'System.Data.SQLite'

If you are using IIS Express as the web server on your development machine I would change to Local IIS. This worked for me.

Send mail via Gmail with PowerShell V2's Send-MailMessage

I'm not sure you can change port numbers with Send-MailMessage since Gmail works on port 587. Anyway, here's how to send email through Gmail with .NET SmtpClient:

$smtpClient = New-Object system.net.mail.smtpClient
$smtpClient.Host = 'smtp.gmail.com'
$smtpClient.Port = 587
$smtpClient.EnableSsl = $true
$smtpClient.Credentials = [Net.NetworkCredential](Get-Credential GmailUserID)
$smtpClient.Send('[email protected]', '[email protected]', 'test subject', 'test message')

ASP.NET MVC Custom Error Handling Application_Error Global.asax?

Application_Error having issue with Ajax requests. If error handled in Action which called by Ajax - it will display your Error View inside the resulting container.

Resolving ORA-4031 "unable to allocate x bytes of shared memory"

Even though you are using ASMM, you can set a minimum size for the large pool (MMAN will not shrink it below that value). You can also try pinning some objects and increasing SGA_TARGET.

Master Page Weirdness - "Content controls have to be top-level controls in a content page or a nested master page that references a master page."

I encountered this error after editing a web part (.aspx) page in SharePoint Designer 2013. When I looked at the code in SPD, an H1 element near the top of the page was highlighted yellow. Hovering over that indicated that SharePoint:AjaxDelta was not closed before the H1. Adding the </SharePoint:AjaxDelta> fixed it.

Weird because it appeared SPD introduced the error after I was working on listview web parts or a page viewer web part elsewhere on the page.

"The Controls collection cannot be modified because the control contains code blocks"

I can confirm that moving the javascript with <% %> tags from the head to the form tag fixes this error

http://italez.wordpress.com/2010/06/22/ajaxcontroltoolkit-calendarextender-e-strana-eccezione/

Sending email through Gmail SMTP server with C#

The problem is not one of technical ability to send through gmail. That works for most situations. If you can't get a machine to send, it is usually due to the machine not having been authenticated with a human at the controls at least once.

The problem that most users face is that Google decides to change the outbound limits all the time. You should always add defensive code to your solution. If you start seeing errors, step off your send speed and just stop sending for a while. If you keep trying to send Google will sometimes add extra time to your delay period before you can send again.

What I have done in my current system is to send with a 1.5 second delay between each message. Then if I get any errors, stop for 5 minutes and then start again. This usually works and will allow you to send up to the limits of the account (last I checked it was 2,000 for premier customer logins per day).

Catching "Maximum request length exceeded"

You can solve this by increasing the maximum request length and execution time out in your web.config:

-Please Clarify the maximum execution time out grater then 1200

<?xml version="1.0" encoding="utf-8"?> <configuration> <system.web> <httpRuntime maxRequestLength="102400" executionTimeout="1200" /> </system.web> </configuration>

Reading an Excel file in PHP

I'm using below excel file url: https://github.com/inventorbala/Sample-Excel-files/blob/master/sample-excel-files.xlsx

Output:

Routing for custom ASP.NET MVC 404 Error page

This solution doesn't need web.config file changes or catch-all routes.

First, create a controller like this;

public class ErrorController : Controller
{
    public ActionResult Index()
    {
        ViewBag.Title = "Regular Error";
        return View();
    }

    public ActionResult NotFound404()
    {
        ViewBag.Title = "Error 404 - File not Found";
        return View("Index");
    }
}

Then create the view under "Views/Error/Index.cshtml" as;

 @{
      Layout = "~/Views/Shared/_Layout.cshtml";
  }                     
  <p>We're sorry, page you're looking for is, sadly, not here.</p>

Then add the following in the Global asax file as below:

protected void Application_Error(object sender, EventArgs e)
{
        // Do whatever you want to do with the error

        //Show the custom error page...
        Server.ClearError(); 
        var routeData = new RouteData();
        routeData.Values["controller"] = "Error";

        if ((Context.Server.GetLastError() is HttpException) && ((Context.Server.GetLastError() as HttpException).GetHttpCode() != 404))
        {
            routeData.Values["action"] = "Index";
        }
        else
        {
            // Handle 404 error and response code
            Response.StatusCode = 404;
            routeData.Values["action"] = "NotFound404";
        } 
        Response.TrySkipIisCustomErrors = true; // If you are using IIS7, have this line
        IController errorsController = new ErrorController();
        HttpContextWrapper wrapper = new HttpContextWrapper(Context);
        var rc = new System.Web.Routing.RequestContext(wrapper, routeData);
        errorsController.Execute(rc);

        Response.End();
}

If you still get the custom IIS error page after doing this, make sure the following sections are commented out(or empty) in the web config file:

<system.web>
   <customErrors mode="Off" />
</system.web>
<system.webServer>   
   <httpErrors>     
   </httpErrors>
</system.webServer>

C#: How to access an Excel cell?

~~If you are trying to automate Excel, you probably shouldn't be opening a Word document and using the Word automation ;)~~

Check this out, it should get you started,

http://www.codeproject.com/KB/office/package.aspx

And here is some code. It is taken from some of my code and has a lot of stuff deleted, so it doesn't do anything and may not compile or work exactly, but it should get you going. It is oriented toward reading, but should point you in the right direction.

Microsoft.Office.Interop.Excel.Worksheet sheet = newWorkbook.ActiveSheet;

if ( sheet != null )
{
    Microsoft.Office.Interop.Excel.Range range = sheet.UsedRange;
    if ( range != null )
    {
        int nRows = usedRange.Rows.Count;
        int nCols = usedRange.Columns.Count;
        foreach ( Microsoft.Office.Interop.Excel.Range row in usedRange.Rows )
        {
            string value = row.Cells[0].FormattedValue as string;
        }
    }
 }

You can also do

Microsoft.Office.Interop.Excel.Sheets sheets = newWorkbook.ExcelSheets;

if ( sheets != null )
{
     foreach ( Microsoft.Office.Interop.Excel.Worksheet sheet in sheets )
     {
          // Do Stuff
     }
}

And if you need to insert rows/columns

// Inserts a new row at the beginning of the sheet
Microsoft.Office.Interop.Excel.Range a1 = sheet.get_Range( "A1", Type.Missing );
a1.EntireRow.Insert( Microsoft.Office.Interop.Excel.XlInsertShiftDirection.xlShiftDown, Type.Missing );

java.util.zip.ZipException: error in opening zip file

I solved this by clearing the jboss-x.y.z/server[config]/tmp and jboss-x.y.z/server/[config]/work directories.

How to persist a property of type List<String> in JPA?

According to Java Persistence with Hibernate

mapping collections of value types with annotations [...]. At the time of writing it isn't part of the Java Persistence standard

If you were using Hibernate, you could do something like:

@org.hibernate.annotations.CollectionOfElements(
    targetElement = java.lang.String.class
)
@JoinTable(
    name = "foo",
    joinColumns = @JoinColumn(name = "foo_id")
)
@org.hibernate.annotations.IndexColumn(
    name = "POSITION", base = 1
)
@Column(name = "baz", nullable = false)
private List<String> arguments = new ArrayList<String>();

Update: Note, this is now available in JPA2.

How to scp in Python?

As of today, the best solution is probably AsyncSSH

https://asyncssh.readthedocs.io/en/latest/#scp-client

async with asyncssh.connect('host.tld') as conn:
    await asyncssh.scp((conn, 'example.txt'), '.', recurse=True)

Why do I get "Cannot redirect after HTTP headers have been sent" when I call Response.Redirect()?

Once you send any content at all to the client, the HTTP headers have already been sent. A Response.Redirect() call works by sending special information in the headers that make the browser ask for a different URL.

Since the headers were already sent, asp.net can't do what you want (modify the headers)

You can get around this by a) either doing the Redirect before you do anything else, or b) try using Response.Buffer = true before you do anything else, to make sure that no output is sent to the client until the whole page is done executing.

ModalPopupExtender OK Button click event not firing?

I was just searching for a solution for this :)

it appears that you can't have OkControlID assign to a control if you want to that control fires an event, just removing this property I got everything working again.

my code (working):

<asp:Panel ID="pnlResetPanelsView" CssClass="modalPopup" runat="server" Style="display:none;">
    <h2>
        Warning</h2>
    <p>
        Do you really want to reset the panels to the default view?</p>
    <div style="text-align: center;">
        <asp:Button ID="btnResetPanelsViewOK" Width="60" runat="server" Text="Yes" 
            CssClass="buttonSuperOfficeLayout" OnClick="btnResetPanelsViewOK_Click" />&nbsp;
        <asp:Button ID="btnResetPanelsViewCancel" Width="60" runat="server" Text="No" CssClass="buttonSuperOfficeLayout" />
    </div>
</asp:Panel>
<ajax:ModalPopupExtender ID="mpeResetPanelsView" runat="server" TargetControlID="btnResetView"
    PopupControlID="pnlResetPanelsView" BackgroundCssClass="modalBackground" DropShadow="true"
    CancelControlID="btnResetPanelsViewCancel" />

How can the error 'Client found response content type of 'text/html'.. be interpreted

Delete web.config file and insert again. http://forums.asp.net/post/916808.aspx

Which is faster: multiple single INSERTs or one multiple-row INSERT?

It's ridiculous how bad Mysql and MariaDB are optimized when it comes to inserts. I tested mysql 5.7 and mariadb 10.3, no real difference on those.

I've tested this on a server with NVME disks, 70,000 IOPS, 1.1 GB/sec seq throughput and that's possible full duplex (read and write).
The server is a high performance server as well.
Gave it 20 GB of ram.
The database completely empty.

The speed I receive was 5000 inserts per second when doing multi row inserts (tried it with 1MB up to 10MB chunks of data)

Now the clue:
If I add another thread and insert into the SAME tables I suddenly have 2x5000 /sec. One more thread and I have 15000 total /sec

Consider this: When doing ONE thread inserts it means you can sequentially write to the disk (with exceptions to indexes). When using threads you actually degrade the possible performance because it now needs to do a lot more random accesses. But reality check shows mysql is so badly optimized that threads help a lot.

The real performance possible with such a server is probably millions per second, the CPU is idle the disk is idle.
The reason is quite clearly that mariadb just as mysql has internal delays.

How to define an enum with string value?

I wish there were a more elegant solution, like just allowing string type enum in the language level, but it seems that it is not supported yet. The code below is basically the same idea as other answers, but I think it is shorter and it can be reused. All you have to do is adding a [Description("")] above each enum entry and add a class that has 10 lines.

The class:

public static class Extensions
{
    public static string ToStringValue(this Enum en)
    {
        var type = en.GetType();
        var memInfo = type.GetMember(en.ToString());
        var attributes = memInfo[0].GetCustomAttributes(typeof(DescriptionAttribute), false);
        var stringValue = ((DescriptionAttribute)attributes[0]).Description;
        return stringValue;
    }
}

Usage:

    enum Country
    {
        [Description("Deutschland")]
        Germany,
        [Description("Nippon")]
        Japan,
        [Description("Italia")]
        Italy,
    }

    static void Main(string[] args)
    {
        Show(new[] {Country.Germany, Country.Japan, Country.Italy});

        void Show(Country[] countries)
        {
            foreach (var country in countries)
            {
                Debug.WriteLine(country.ToStringValue());
            }
        }
    }

javax.xml.bind.JAXBException: Class *** nor any of its super class is known to this context

I know that it's an old question, but you can change the Response using a parameter (P):

public class Response<P> implements Serializable{

private static final long serialVersionUID = 1L;

public enum MessageCode {
    SUCCESS, ERROR, UNKNOWN
}

private MessageCode code;
private String message;
private P payload;

...
public P getPayload() {
    return payload;
}

public void setPayload(P payload) {
    this.payload = payload;
}

}

The method would be

public Response<Departments> getDepartments(){...}

I can't try it now but it should works.

Otherwise it's possible to extends Response

@XmlRootElement    
public class DepResponse extends Response<Department> {<no content>}

Inverse of a matrix using numpy

The I attribute only exists on matrix objects, not ndarrays. You can use numpy.linalg.inv to invert arrays:

inverse = numpy.linalg.inv(x)

Note that the way you're generating matrices, not all of them will be invertible. You will either need to change the way you're generating matrices, or skip the ones that aren't invertible.

try:
    inverse = numpy.linalg.inv(x)
except numpy.linalg.LinAlgError:
    # Not invertible. Skip this one.
    pass
else:
    # continue with what you were doing

Also, if you want to go through all 3x3 matrices with elements drawn from [0, 10), you want the following:

for comb in itertools.product(range(10), repeat=9):

rather than combinations_with_replacement, or you'll skip matrices like

numpy.array([[0, 1, 0],
             [0, 0, 0],
             [0, 0, 0]])

MySQL stored procedure return value

Update your SP and handle exception in it using declare handler with get diagnostics so that you will know if there is an exception. e.g.

CREATE DEFINER=`root`@`localhost` PROCEDURE `validar_egreso`(
IN codigo_producto VARCHAR(100),
IN cantidad INT,
OUT valido INT(11)
)
BEGIN
DECLARE EXIT HANDLER FOR SQLEXCEPTION
BEGIN
    GET DIAGNOSTICS CONDITION 1
    @p1 = RETURNED_SQLSTATE, @p2 = MESSAGE_TEXT;
    SELECT @p1, @p2;
END
DECLARE resta INT(11);
SET resta = 0;

SELECT (s.stock - cantidad) INTO resta
FROM stock AS s
WHERE codigo_producto = s.codigo;

IF (resta > s.stock_minimo) THEN
    SET valido = 1;
ELSE
    SET valido = -1;
END IF;
SELECT valido;
END

Creating a SOAP call using PHP with an XML body

First off, you have to specify you wish to use Document Literal style:

$client = new SoapClient(NULL, array(
    'location' => 'https://example.com/path/to/service',
    'uri' => 'http://example.com/wsdl',
    'trace' => 1,
    'use' => SOAP_LITERAL)
);

Then, you need to transform your data into a SoapVar; I've written a simple transform function:

function soapify(array $data)
{
        foreach ($data as &$value) {
                if (is_array($value)) {
                        $value = soapify($value);
                }
        }

        return new SoapVar($data, SOAP_ENC_OBJECT);
}

Then, you apply this transform function onto your data:

$data = soapify(array(
    'Acquirer' => array(
        'Id' => 'MyId',
        'UserId' => 'MyUserId',
        'Password' => 'MyPassword',
    ),
));

Finally, you call the service passing the Data parameter:

$method = 'Echo';

$result = $client->$method(new SoapParam($data, 'Data'));

Adding Buttons To Google Sheets and Set value to Cells on clicking

You can insert an image that looks like a button. Then attach a script to the image.

INSERT menu
Image

Insert Image

You can insert any image. The image can be edited in the spreadsheet

Edit Image

Image of a Button

Image of Button

Assign a function name to an image:

Assign Function

Eclipse will not start and I haven't changed anything

I tried several of the options posted in this article, but it worked for me using this option in eclipse.ini:

-Dorg.eclipse.swt.browser.DefaultType=mozilla

String to byte array in php

PHP has no explicit byte type, but its string is already the equivalent of Java's byte array. You can safely write fputs($connection, "The quick brown fox …"). The only thing you must be aware of is character encoding, they must be the same on both sides. Use mb_convert_encoding() when in doubt.

What LaTeX Editor do you suggest for Linux?

Gummi is the best LaTeX editor. It is a free, open source, cross-platform, program, featuring a live preview pane.

http://gummi.midnightcoding.org/

e4 http://gummi.midnightcoding.org/wp-content/uploads/20091012-1large(1).png

What does <> mean in excel?

It means "not equal to" (as in, the values in cells E37-N37 are not equal to "", or in other words, they are not empty.)

Could not find or load main class org.gradle.wrapper.GradleWrapperMain

In my case, I left out wrapper sub folder while copying gradle folder and got the same error.

Could not find or load main class org.gradle.wrapper.GradleWrapperMain

make sure you have the correct folder structure if you copy wrapper from other location.

+-- build.gradle
+-- gradle
¦   +-- wrapper
¦       +-- gradle-wrapper.jar
¦       +-- gradle-wrapper.properties
+-- gradlew
+-- gradlew.bat
+-- settings.gradle

How does Python return multiple values from a function?

Since the return statement in getName specifies multiple elements:

def getName(self):
   return self.first_name, self.last_name

Python will return a container object that basically contains them.

In this case, returning a comma separated set of elements creates a tuple. Multiple values can only be returned inside containers.

Let's use a simpler function that returns multiple values:

def foo(a, b):
    return a, b

You can look at the byte code generated by using dis.dis, a disassembler for Python bytecode. For comma separated values w/o any brackets, it looks like this:

>>> import dis
>>> def foo(a, b):
...     return a,b        
>>> dis.dis(foo)
  2           0 LOAD_FAST                0 (a)
              3 LOAD_FAST                1 (b)
              6 BUILD_TUPLE              2
              9 RETURN_VALUE

As you can see the values are first loaded on the internal stack with LOAD_FAST and then a BUILD_TUPLE (grabbing the previous 2 elements placed on the stack) is generated. Python knows to create a tuple due to the commas being present.

You could alternatively specify another return type, for example a list, by using []. For this case, a BUILD_LIST is going to be issued following the same semantics as it's tuple equivalent:

>>> def foo_list(a, b):
...     return [a, b]
>>> dis.dis(foo_list)
  2           0 LOAD_FAST                0 (a)
              3 LOAD_FAST                1 (b)
              6 BUILD_LIST               2
              9 RETURN_VALUE

The type of object returned really depends on the presence of brackets (for tuples () can be omitted if there's at least one comma). [] creates lists and {} sets. Dictionaries need key:val pairs.

To summarize, one actual object is returned. If that object is of a container type, it can contain multiple values giving the impression of multiple results returned. The usual method then is to unpack them directly:

>>> first_name, last_name = f.getName()
>>> print (first_name, last_name)

As an aside to all this, your Java ways are leaking into Python :-)

Don't use getters when writing classes in Python, use properties. Properties are the idiomatic way to manage attributes, for more on these, see a nice answer here.

Specify an SSH key for git push for a given domain

An alternative approach to the one offered above by Mark Longair is to use an alias that will run any git command, on any remote, with an alternative SSH key. The idea is basically to switch your SSH identity when running the git commands.

Advantages relative to the host alias approach in the other answer:

Will work with any git commands or aliases, even if you can't specify the remote explicitly.
Easier to work with many repositories because you only need to set it up once per client machine, not once per repository on each client machine.

I use a few small scripts and a git alias admin. That way I can do, for example:

git admin push

To push to the default remote using the alternative ("admin") SSH key. Again, you could use any command (not just push) with this alias. You could even do git admin clone ... to clone a repository that you would only have access to using your "admin" key.

Step 1: Create the alternative SSH keys, optionally set a passphrase in case you're doing this on someone else's machine.

Step 2: Create a script called “ssh-as.sh” that runs stuff that uses SSH, but uses a given SSH key rather than the default:

#!/bin/bash
exec ssh ${SSH_KEYFILE+-i "$SSH_KEYFILE"} "$@"

Step 3: Create a script called “git-as.sh” that runs git commands using the given SSH key.

#!/bin/bash
SSH_KEYFILE=$1 GIT_SSH=${BASH_SOURCE%/*}/ssh-as.sh exec git "${@:2}"

Step 4: Add an alias (using something appropriate for “PATH_TO_SCRIPTS_DIR” below):

# Run git commands as the SSH identity provided by the keyfile ~/.ssh/admin
git config --global alias.admin \!"PATH_TO_SCRIPTS_DIR/git-as.sh ~/.ssh/admin"

More details at: http://noamlewis.wordpress.com/2013/01/24/git-admin-an-alias-for-running-git-commands-as-a-privileged-ssh-identity/

MySQL create stored procedure syntax with delimiter

I have created a simple MySQL procedure as given below:

DELIMITER //
CREATE PROCEDURE GetAllListings()
 BEGIN
 SELECT nid, type, title  FROM node where type = 'lms_listing' order by nid desc;
END //
DELIMITER;

Kindly follow this. After the procedure created, you can see the same and execute it.

Min and max value of input in angular4 application

Simply do this in angular2+ by adding (onkeypress)

<input type="number" 
    maxlength="3" 
    min="0" 
    max="100" 
    required 
    mdInput 
    placeholder="Charge" 
    [(ngModel)]="rateInput"
    (onkeypress)="return (event.charCode == 8 || event.charCode == 0) ? null : event.charCode >= 48 && event.charCode <= 57"
    name="rateInput">

Tested on Angular 7

How to programmatically get iOS status bar height

`UIApplication.shared.statusBarFrame.height` was deprecated in iOS 13

'statusBarFrame' was deprecated in iOS 13.0: Use the statusBarManager property of the window scene instead.

You can retrieve status bar height in iOS 13 like follows:

let statusBarHeight = view.window?.windowScene?.statusBarManager?.statusBarFrame.height

NB! It's optional so make sure you have correct fallback.

Looping over elements in jQuery

I have used the following before:

var my_form = $('#form-id');
var data = {};

$('input:not([type=checkbox]), input[type=checkbox]:selected, select, textarea', my_form).each(
    function() {
        var name = $(this).attr('name');
        var val = $(this).val();

        if (!data.hasOwnProperty(name)) {
            data[name] = new Array;
        }

        data[name].push(val);
    }
);

This is just written from memory, so might contain mistakes, but this should make an object called data that contains the values for all your inputs.

Note that you have to deal with checkboxes in a special way, to avoid getting the values of unchecked checkboxes. The same is probably true of radio inputs.

Also note using arrays for storing the values, as for one input name, you might have values from several inputs (checkboxes in particular).

Wrapping a react-router Link in an html button

You can use useHistory hook since react-router v5.1.0.

The useHistory hook gives you access to the history instance that you may use to navigate.

import React from 'react'
import { useHistory } from 'react-router-dom'

export default function SomeComponent() {
  const { push } = useHistory()
  ...
  <button
    type="button"
    onClick={() => push('/some-link')}
  >
    Some link
  </button>
  ...
}

<xsl:variable> Print out value of XSL variable using <xsl:value-of>

In XSLT the same <xsl:variable> can be declared only once and can be given a value only at its declaration. If more than one variables are declared at the same time, they are in fact different variables and have different scope.

Therefore, the way to achieve the wanted conditional setting of the variable and producing its value is the following:

<xsl:stylesheet version="1.0"
 xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
 <xsl:output omit-xml-declaration="yes"/>

    <xsl:template match="class">
    <xsl:variable name="subexists">
            <xsl:choose>
                <xsl:when test="joined-subclass">true</xsl:when>
                <xsl:otherwise>false</xsl:otherwise>
            </xsl:choose>
        </xsl:variable>
        subexists:  <xsl:text/>    
        <xsl:value-of select="$subexists" />
    </xsl:template>
</xsl:stylesheet>

When the above transformation is applied on the following XML document:

<class>
 <joined-subclass/>
</class>

the wanted result is produced:

    subexists:  true

Checking for #N/A in Excel cell from VBA code

First check for an error (N/A value) and then try the comparisation against cvErr(). You are comparing two different things, a value and an error. This may work, but not always. Simply casting the expression to an error may result in similar problems because it is not a real error only the value of an error which depends on the expression.

If IsError(ActiveWorkbook.Sheets("Publish").Range("G4").offset(offsetCount, 0).Value) Then
  If (ActiveWorkbook.Sheets("Publish").Range("G4").offset(offsetCount, 0).Value <> CVErr(xlErrNA)) Then
    'do something
  End If
End If

jQuery detect if string contains something

You get the value of the textarea, use it :

$('.type').keyup(function() {
    var v = $('.type').val(); // you'd better use this.value here
    if (v.indexOf('> <')!=-1) {
       console.log('contains > <');        
    }
});

Using HTML5/JavaScript to generate and save a file

HTML5 defined a window.saveAs(blob, filename) method. It isn't supported by any browser right now. But there is a compatibility library called FileSaver.js that adds this function to most modern browsers (including Internet Explorer 10+). Internet Explorer 10 supports a navigator.msSaveBlob(blob, filename) method (MSDN), which is used in FileSaver.js for Internet Explorer support.

I wrote a blog posting with more details about this problem.

How to unload a package without restarting R

detach(package:PackageName) works and there is no need to use quotes.

find all subsets that sum to a particular value

This my program in ruby . It will return arrays, each holding the subsequences summing to the provided target value.

array = [1, 3, 4, 2, 7, 8, 9]

0..array.size.times.each do |i| 
  array.combination(i).to_a.each { |a| print a if a.inject(:+) == 9} 
end

MySQL select one column DISTINCT, with corresponding other columns

How about

`SELECT 
    my_distinct_column,
    max(col1),
    max(col2),
    max(col3)
    ...
 FROM
    my_table 
 GROUP BY 
    my_distinct_column`

How to set ID using javascript?

Do you mean like this?

var hello1 = document.getElementById('hello1');
hello1.id = btoa(hello1.id);

To further the example, say you wanted to get all elements with the class 'abc'. We can use querySelectorAll() to accomplish this:

HTML

<div class="abc"></div>
<div class="abc"></div>

var abcElements = document.querySelectorAll('.abc');

// Set their ids
for (var i = 0; i < abcElements.length; i++)
    abcElements[i].id = 'abc-' + i;

This will assign the ID 'abc-<index number>' to each element. So it would come out like this:

<div class="abc" id="abc-0"></div>
<div class="abc" id="abc-1"></div>

To create an element and assign an id we can use document.createElement() and then appendChild().

var div = document.createElement('div');
div.id = 'hello1';

var body = document.querySelector('body');
body.appendChild(div);

Update

You can set the id on your element like this if your script is in your HTML file.

<input id="{{str(product["avt"]["fto"])}}" >
<span>New price :</span>
<span class="assign-me">

<script type="text/javascript">
    var s = document.getElementsByClassName('assign-me')[0];
    s.id = btoa({{str(produit["avt"]["fto"])}});
</script>

Your requirements still aren't 100% clear though.

Difference between BYTE and CHAR in column datatypes

I am not sure since I am not an Oracle user, but I assume that the difference lies when you use multi-byte character sets such as Unicode (UTF-16/32). In this case, 11 Bytes could account for less than 11 characters.

Also those field types might be treated differently in regard to accented characters or case, for example 'binaryField(ete) = "été"' will not match while 'charField(ete) = "été"' might (again not sure about Oracle).

subtract two times in python

I had similar situation as you and I ended up with using external library called arrow.

Here is what it looks like:

>>> import arrow
>>> enter = arrow.get('12:30:45', 'HH:mm:ss')
>>> exit = arrow.now()
>>> duration = exit - enter
>>> duration
datetime.timedelta(736225, 14377, 757451)

How to delete a selected DataGridViewRow and update a connected database table?

maybe you can use temp list for delete. for ignore row index change

_x000D_

<pre>_x000D_
private void btnDelete_Click(object sender, EventArgs e)_x000D_
{_x000D_
    List<int> wantdel = new List<int>();_x000D_
    foreach (DataGridViewRow row in dataGridView1.Rows)_x000D_
    {_x000D_
        if ((bool)row.Cells["Select"].Value == true)_x000D_
        wantdel.Add(row.Index);_x000D_
    }_x000D_
_x000D_
    wantdel.OrderByDescending(y => y).ToList().ForEach(x =>_x000D_
    {_x000D_
        dataGridView1.Rows.RemoveAt(x);_x000D_
    });           _x000D_
}_x000D_
</pre>

_x000D_

Importing a Maven project into Eclipse from Git

You should note that putting generated metadata under version control (let it be git or any other scm), is not a very good idea if there are more than one developer working on the codebase. Two developers may have a totally different project or classpath setup. Just as a heads up in case you intends to share the code at some time...

TCPDF not render all CSS properties

Since version 5.7 TCPDF includes support for CSS borders. Margins, padding and float are not yet supported. Check the TCPDF website at http://www.tcpdf.org and consult the official forum for further information.

Increase Tomcat memory settings

try setting this

CATALINA_OPTS="-Djava.awt.headless=true -Dfile.encoding=UTF-8 
-server -Xms1536m -Xmx1536m
-XX:NewSize=256m -XX:MaxNewSize=256m -XX:PermSize=256m 
-XX:MaxPermSize=256m -XX:+DisableExplicitGC"

in {$tomcat-folder}\bin\setenv.sh (create it if necessary).

See http://www.mkyong.com/tomcat/tomcat-javalangoutofmemoryerror-permgen-space/ for more details.

How do I update a formula with Homebrew?

I think the correct way to do is

brew upgrade mongodb

It will upgrade the mongodb formula. If you want to upgrade all outdated formula, simply

brew upgrade

How to convert a Hibernate proxy to a real entity object

Starting from Hiebrnate 5.2.10 you can use Hibernate.proxy method to convert a proxy to your real entity:

MyEntity myEntity = (MyEntity) Hibernate.unproxy( proxyMyEntity );

Jenkins - How to access BUILD_NUMBER environment variable

For Groovy script in the Jenkinsfile using the $BUILD_NUMBER it works.

What does "make oldconfig" do exactly in the Linux kernel makefile?

Updates an old config with new/changed/removed options.

How to open Console window in Eclipse?

the only solution for me was:

click on window->close all perspective (you can try also close perspective)

after this, in the top right corner click on: open perspective->resource

done

To delay JavaScript function call using jQuery

function sample() {
    alert("This is sample function");
}

$(function() {
    $("#button").click(function() {
        setTimeout(sample, 2000);
    });

});

jsFiddle.

If you want to encapsulate sample() there, wrap the whole thing in a self invoking function (function() { ... })().

How to break/exit from a each() function in JQuery?

Return false from the anonymous function:

$(xml).find("strengths").each(function() {
  // Code
  // To escape from this block based on a condition:
  if (something) return false;
});

From the documentation of the each method:

Returning 'false' from within the each function completely stops the loop through all of the elements (this is like using a 'break' with a normal loop). Returning 'true' from within the loop skips to the next iteration (this is like using a 'continue' with a normal loop).

CSS media query to target iPad and iPad only?

You need to target the device by its User Agent, using some script. The user agent for the iPad is:

Mozilla/5.0 (iPad; U; CPU OS 3_2 like Mac OS X; en-us) AppleWebKit/531.21.10 (KHTML, like Gecko) Version/4.0.4 Mobile/7B334b Safari/531.21.10

time delayed redirect?

<meta http-equiv="refresh" content="2; url=http://example.com/" />

Here 2 is delay in seconds.

How to use PrimeFaces p:fileUpload? Listener method is never invoked or UploadedFile is null / throws an error / not usable

With JBoss 7.2(Undertow) and PrimeFaces 6.0 org.primefaces.webapp.filter.FileUploadFilter should be removed from web.xml and context param file uploader should be set to native:

<context-param>
    <param-name>primefaces.UPLOADER</param-name>
    <param-value>native</param-value>
</context-param>

In Matplotlib, what does the argument mean in fig.add_subplot(111)?

import matplotlib.pyplot as plt
plt.figure(figsize=(8,8))
plt.subplot(3,2,1)
plt.subplot(3,2,3)
plt.subplot(3,2,5)
plt.subplot(2,2,2)
plt.subplot(2,2,4)

The first code creates the first subplot in a layout that has 3 rows and 2 columns.

The three graphs in the first column denote the 3 rows. The second plot comes just below the first plot in the same column and so on.

The last two plots have arguments (2, 2) denoting that the second column has only two rows, the position parameters move row wise.

How to make space between LinearLayout children?

The API >= 11 solution:

You can integrate the padding into divider. In case you were using none, just create a tall empty drawable and set it as LinearLayout's divider:

    <LinearLayout
            android:showDividers="middle"
            android:divider="@drawable/empty_tall_divider"
...>...</LinearLayout>

empty_tall_divider.xml:

<?xml version="1.0" encoding="utf-8"?>

<shape xmlns:android="http://schemas.android.com/apk/res/android">
    <size
            android:height="40dp"
            android:width="0dp"/>
</shape>

Java 8 - Best way to transform a list: map or foreach?

May be Method 3.

I always prefer to keep logic separate.

Predicate<Long> greaterThan100 = new Predicate<Long>() {
    @Override
    public boolean test(Long currentParameter) {
        return currentParameter > 100;
    }
};
        
List<Long> sourceLongList = Arrays.asList(1L, 10L, 50L, 80L, 100L, 120L, 133L, 333L);
List<Long> resultList = sourceLongList.parallelStream().filter(greaterThan100).collect(Collectors.toList());

How do I include a path to libraries in g++

To specify a directory to search for (binary) libraries, you just use -L:

-L/data[...]/lib

To specify the actual library name, you use -l:

-lfoo  # (links libfoo.a or libfoo.so)

To specify a directory to search for include files (different from libraries!) you use -I:

-I/data[...]/lib

So I think what you want is something like

g++ -g -Wall -I/data[...]/lib testing.cpp fileparameters.cpp main.cpp -o test

These compiler flags (amongst others) can also be found at the GNU GCC Command Options manual:

3.16 Options for Directory Search

How to preserve request url with nginx proxy_pass

In my scenario i have make this via below code in nginx vhost configuration

server {
server_name dashboards.etilize.com;

location / {
    proxy_pass http://demo.etilize.com/dashboards/;
    proxy_set_header Host $http_host;
}}

$http_host will set URL in Header same as requested

SQL query to find third highest salary in company

You may use this for all employee with 3rd highest salary:

SELECT * FROM `employee` WHERE salary = (
   SELECT DISTINCT(`salary`) FROM `employee` ORDER BY `salary` DESC LIMIT 1 OFFSET 2
);

Set selected radio from radio group with a value

There is a better way of checking radios and checkbox; you have to pass an array of values to the val method instead of a raw value

Note: If you simply pass the value by itself (without being inside an array), that will result in all values of "mygroup" being set to the value.

$("input[name=mygroup]").val([5]);

Here is the jQuery doc that explains how it works: http://api.jquery.com/val/#val-value

And .val([...]) also works with form elements like <input type="checkbox">, <input type="radio">, and <option>s inside of a <select>.

The inputs and the options having a value that matches one of the elements of the array will be checked or selected, while those having a value that don't match one of the elements of the array will be unchecked or unselected

Fiddle demonstrating this working: https://jsfiddle.net/92nekvp3/

How to test which port MySQL is running on and whether it can be connected to?

Using Mysql client:

mysql> SHOW GLOBAL VARIABLES LIKE 'PORT';

How to encode a string in JavaScript for displaying in HTML?

The only character that needs escaping is <. (> is meaningless outside of a tag).

Therefore, your "magic" code is:

safestring = unsafestring.replace(/</g,'&lt;');

How do I set environment variables from Java?

A version in Kotlin, in this algorithm I created a decorator that allows you to set and get variables from the environment.

import java.util.Collections
import kotlin.reflect.KProperty
?
class EnvironmentDelegate {
    operator fun getValue(thisRef: Any?, property: KProperty<*>): String {
        return System.getenv(property.name) ?: "-"
    }
?
    operator fun setValue(thisRef: Any?, property: KProperty<*>, value: String) {
        val key = property.name
?
        val classes: Array<Class<*>> = Collections::class.java.declaredClasses
        val env = System.getenv()
?
        val cl = classes.first { "java.util.Collections\$UnmodifiableMap" == it.name }
?
        val field = cl.getDeclaredField("m")
        field.isAccessible = true
        val obj = field[env]
        val map = obj as MutableMap<String, String>
        map.putAll(mapOf(key to value))
    }
}
?
class KnownProperties {
    var JAVA_HOME: String by EnvironmentDelegate()
    var sample: String by EnvironmentDelegate()
}
?
fun main() {
    val knowProps = KnownProperties()
    knowProps.sample = "2"
?
    println("Java Home: ${knowProps.JAVA_HOME}")
    println("Sample: ${knowProps.sample}")
}

Postgres - Transpose Rows to Columns

Use crosstab() from the tablefunc module.

SELECT * FROM crosstab(
   $$SELECT user_id, user_name, rn, email_address
     FROM  (
        SELECT u.user_id, u.user_name, e.email_address
             , row_number() OVER (PARTITION BY u.user_id
                            ORDER BY e.creation_date DESC NULLS LAST) AS rn
        FROM   usr u
        LEFT   JOIN email_tbl e USING (user_id)
        ) sub
     WHERE  rn < 4
     ORDER  BY user_id
   $$
  , 'VALUES (1),(2),(3)'
   ) AS t (user_id int, user_name text, email1 text, email2 text, email3 text);

I used dollar-quoting for the first parameter, which has no special meaning. It's just convenient if you have to escape single quotes in the query string which is a common case:

Insert text with single quotes in PostgreSQL

Detailed explanation and instructions here:

PostgreSQL Crosstab Query

And in particular, for "extra columns":

Pivot on Multiple Columns using Tablefunc

The special difficulties here are:

The lack of key names.
-> We substitute with row_number() in a subquery.
The varying number of emails.
-> We limit to a max. of three in the outer SELECT
and use crosstab() with two parameters, providing a list of possible keys.

Pay attention to NULLS LAST in the ORDER BY.

How to hide element using Twitter Bootstrap and show it using jQuery?

hide and hidden are both deprecated and later removed, no longer exist in new versions. You can use d-none/d-sm-none/invisible etc classes depending on your needs. The probable reason they were removed is because hidden/hide is a bit confusing in the CSS context. In CSS, to hide (hidden) is used for visibility, not for display. visibility and display are different things.

If you need a class for visibility:hidden, then you need invisible class from visibility utilities.

Check below both visibility and display utilities:

https://getbootstrap.com/docs/4.1/utilities/visibility/

https://getbootstrap.com/docs/4.1/utilities/display/

Android - styling seek bar

As mention one above (@andrew) , creating custom SeekBar is super Easy with this site - http://android-holo-colors.com/

Just enable SeekBar there, choose color, and receive all resources and copy to project. Then apply them in xml, for example:

  android:thumb="@drawable/apptheme_scrubber_control_selector_holo_light"
  android:progressDrawable="@drawable/apptheme_scrubber_progress_horizontal_holo_light"

HTTP GET in VB.NET

Use the WebRequest class

This is to get an image:

Try
    Dim _WebRequest As System.Net.WebRequest = Nothing
    _WebRequest = System.Net.WebRequest.Create(http://api.hostip.info/?ip=68.180.206.184)
Catch ex As Exception
    Windows.Forms.MessageBox.Show(ex.Message)
    Exit Sub
End Try

Try
    _NormalImage = Image.FromStream(_WebRequest.GetResponse().GetResponseStream())
Catch ex As Exception
    Windows.Forms.MessageBox.Show(ex.Message)
    Exit Sub
End Try

Appending a vector to a vector

a.insert(a.end(), b.begin(), b.end());

a.insert(std::end(a), std::begin(b), std::end(b));

The second variant is a more generically applicable solution, as b could also be an array. However, it requires C++11. If you want to work with user-defined types, use ADL:

using std::begin, std::end;
a.insert(end(a), begin(b), end(b));

Toolbar navigation icon never set

You can use invalidate() method to change toolbar state in any place. Example:

Toolbar toolbar = (Toolbar)findViewById(R.id.my_awesome_toolbar);
setSupportActionBar(toolbar);

toolbar.setNavigationIcon(R.mipmap.arrow_white);
toolbar.invalidate();       // restore toolbar

How do I fix 'ImportError: cannot import name IncompleteRead'?

In Windows, this worked from an administrative prompt:

Delete C:\Python27\Lib\site-packages\requests*
easy_install requests==2.3
pip install --upgrade pip
pip install --upgrade requests

Need to navigate to a folder in command prompt

Navigate to the folder in Windows Explorer, highlight the complete folder path in the top pane and type "cmd" - voila!

Relative div height

Basically, the problem lies in block12. for the block1/2 to take up the total height of the block12, it must have a defined height. This stack overflow post explains that in really good detail.

So setting a defined height for block12 will allow you to set a proper height. I have created an example on JSfiddle that will show you the the blocks can be floated next to one another if the block12 div is set to a standard height through out the page.

Here is an example including a header and block3 div with some content in for examples.

#header{
   position:absolute;
   top:0;
   left:0;
   width:100%;
   height:20%;
    }

    #block12{
    position:absolute;
    top:20%;
    width:100%;
    left:0;
    height:40%;
    }
    #block1,#block2{
    float:left;
    overflow-y: scroll;
    text-align:center;
    color:red;
    width:50%;
    height:100%;

    }
 #clear{clear:both;}
 #block3{
    position:absolute;
    bottom:0;
    color:blue;
    height:40%;

    }

How to change fontFamily of TextView in Android

Typeface typeface = ResourcesCompat.getFont(context, R.font.font_name);
textView.setTypeface(typeface);

set easily font to any textview from res>font directory programmatically

Sort a list of numerical strings in ascending order

in python sorted works like you want with integers:

>>> sorted([10,3,2])
[2, 3, 10]

it looks like you have a problem because you are using strings:

>>> sorted(['10','3','2'])
['10', '2', '3']

(because string ordering starts with the first character, and "1" comes before "2", no matter what characters follow) which can be fixed with key=int

>>> sorted(['10','3','2'], key=int)
['2', '3', '10']

which converts the values to integers during the sort (it is called as a function - int('10') returns the integer 10)

and as suggested in the comments, you can also sort the list itself, rather than generating a new one:

>>> l = ['10','3','2']
>>> l.sort(key=int)
>>> l
['2', '3', '10']

but i would look into why you have strings at all. you should be able to save and retrieve integers. it looks like you are saving a string when you should be saving an int? (sqlite is unusual amongst databases, in that it kind-of stores data in the same type as it is given, even if the table column type is different).

and once you start saving integers, you can also get the list back sorted from sqlite by adding order by ... to the sql command:

select temperature from temperatures order by temperature;

Resize an Array while keeping current elements in Java?

You can't resize an array, but you can redefine it keeping old values or use a java.util.List

Here follows two solutions but catch the performance differences running the code below

Java Lists are 450 times faster but 20 times heavier in memory!

testAddByteToArray1 nanoAvg:970355051   memAvg:100000
testAddByteToList1  nanoAvg:1923106     memAvg:2026856
testAddByteToArray1 nanoAvg:919582271   memAvg:100000
testAddByteToList1  nanoAvg:1922660     memAvg:2026856
testAddByteToArray1 nanoAvg:917727475   memAvg:100000
testAddByteToList1  nanoAvg:1904896     memAvg:2026856
testAddByteToArray1 nanoAvg:918483397   memAvg:100000
testAddByteToList1  nanoAvg:1907243     memAvg:2026856

import java.util.ArrayList;
import java.util.List;

public class Test {

    public static byte[] byteArray = new byte[0];
    public static List<Byte> byteList = new ArrayList<>();
    public static List<Double> nanoAvg = new ArrayList<>();
    public static List<Double> memAvg = new ArrayList<>();

    public static void addByteToArray1() {
        // >>> SOLUTION ONE <<<
        byte[] a = new byte[byteArray.length + 1];
        System.arraycopy(byteArray, 0, a, 0, byteArray.length);
        byteArray = a;
        //byteArray = Arrays.copyOf(byteArray, byteArray.length + 1); // the same as System.arraycopy()
    }

    public static void addByteToList1() {
        // >>> SOLUTION TWO <<<
        byteList.add(new Byte((byte) 0));
    }

    public static void testAddByteToList1() throws InterruptedException {
        System.gc();
        long m1 = getMemory();
        long n1 = System.nanoTime();
        for (int i = 0; i < 100000; i++) {
            addByteToList1();
        }
        long n2 = System.nanoTime();
        System.gc();
        long m2 = getMemory();
        byteList = new ArrayList<>();
        nanoAvg.add(new Double(n2 - n1));
        memAvg.add(new Double(m2 - m1));
    }

    public static void testAddByteToArray1() throws InterruptedException {
        System.gc();
        long m1 = getMemory();
        long n1 = System.nanoTime();
        for (int i = 0; i < 100000; i++) {
            addByteToArray1();
        }
        long n2 = System.nanoTime();
        System.gc();
        long m2 = getMemory();
        byteArray = new byte[0];
        nanoAvg.add(new Double(n2 - n1));
        memAvg.add(new Double(m2 - m1));
    }

    public static void resetMem() {
        nanoAvg = new ArrayList<>();
        memAvg = new ArrayList<>();
    }

    public static Double getAvg(List<Double> dl) {
        double max = Collections.max(dl);
        double min = Collections.min(dl);
        double avg = 0;
        boolean found = false;
        for (Double aDouble : dl) {
            if (aDouble < max && aDouble > min) {
                if (avg == 0) {
                    avg = aDouble;
                } else {
                    avg = (avg + aDouble) / 2d;
                }
                found = true;
            }
        }
        if (!found) {
            return getPopularElement(dl);
        }
        return avg;
    }

    public static double getPopularElement(List<Double> a) {
        int count = 1, tempCount;
        double popular = a.get(0);
        double temp = 0;
        for (int i = 0; i < (a.size() - 1); i++) {
            temp = a.get(i);
            tempCount = 0;
            for (int j = 1; j < a.size(); j++) {
                if (temp == a.get(j))
                    tempCount++;
            }
            if (tempCount > count) {
                popular = temp;
                count = tempCount;
            }
        }
        return popular;
    }

    public static void testCompare() throws InterruptedException {
        for (int j = 0; j < 4; j++) {
            for (int i = 0; i < 20; i++) {
                testAddByteToArray1();
            }
            System.out.println("testAddByteToArray1\tnanoAvg:" + getAvg(nanoAvg).longValue() + "\tmemAvg:" + getAvg(memAvg).longValue());
            resetMem();
            for (int i = 0; i < 20; i++) {
                testAddByteToList1();
            }
            System.out.println("testAddByteToList1\tnanoAvg:" + getAvg(nanoAvg).longValue() + "\t\tmemAvg:" + getAvg(memAvg).longValue());
            resetMem();
        }
    }

    private static long getMemory() {
        Runtime runtime = Runtime.getRuntime();
        return runtime.totalMemory() - runtime.freeMemory();
    }

    public static void main(String[] args) throws InterruptedException {
        testCompare();
    }
}

Java Regex to Validate Full Name allow only Spaces and Letters

@amal. This code will match your requirement. Only letter and space in between will be allow, no number. The text begin with any letter and could have space in between only. "^" denotes the beginning of the line and "$" denotes end of the line.

public static boolean validateLetters(String txt) {

    String regx = "^[a-zA-Z ]+$";
    Pattern pattern = Pattern.compile(regx,Pattern.CASE_INSENSITIVE);
    Matcher matcher = pattern.matcher(txt);
    return matcher.find();

}

Check whether $_POST-value is empty

Question: Check whether a $_POST value is empty.

Translation: Check to see if an array key/index has a value associated with it.

Answer: Depends on your emphasis on security. Depends on what is allowed as valid input.

1. Some people say use empty().

From the PHP Manual:

"[Empty] determines whether a variable is considered to be empty. A variable is considered empty if it does not exist or if its value equals FALSE."

The following are thus considered empty.

"" (an empty string)
0 (0 as an integer)
0.0 (0 as a float)
"0" (0 as a string)
NULL
FALSE
array() (an empty array)
$var; (a variable declared, but without a value)

If none of these values are valid for your input control, then empty() would work. The problem here is that empty() might be too broad to be used consistently (the same way, for the same reason, on different input control submissions to $_POST or $_GET). A good use of empty() is to check if an entire array is empty (has no elements).

2. Some people say use isset().

isset() (a language construct) cannot operate on entire arrays, as in isset($myArray). It can only operate on variables and array elements (via the index/key): isset($var) and isset($_POST['username']). The isset()language construct does two things. First it checks to see if a variable or array index/key has a value associated with it. Second, it checks to make sure that value is not equal to the PHP NULL value.

In short, the most accurate check can be accomplished best with isset(), as some input controls do not even register with $_POST when they are not selected or checked. I have never known a form that submitted the PHP NULL value. None of mine do, so I use isset() to check if a $_POST key has no value associated with it (and that is not NULL). isset()is a much stricter test of emptiness (in the sense of your question) than empty().

3. Some people say just do if($var), if($myArray), or if($myArray['userName']) to determine emptiness.

You can test anything that evaluates to true or false in an if statement. Empty arrays evaluate to false and so do variables that are not set. Variables that contain the PHP NULL value also evaluate to false. Unfortunately in this case, like with empty(), many more things also evaluate to false: 1. the empty string '', zero (0), zero.zero (0.0), the string zero '0', boolean false, and certain empty XML objects.

--Doyle, Beginning PHP 5.3

In conclusion, use isset() and consider combining it with other tests. Example:

May not work due to superglobal screwiness, but would work for other arrays without question.

if (is_array($_POST) && !empty($_POST)) {
    // Now test for your successful controls in $_POST with isset()
}

Hence, why look for a value associated with a key before you even know for sure that $_POST represents an array and has any values stored in it at all (something many people fail to consider)? Remember, people can send data to your form without using a web browser. You may one day get to the point of testing that $_POST only has the allowed keys, but that conversation is for another day.

Useful reference:

PHP Manual: Type Testing Comparison Tables

WCF Service Client: The content type text/html; charset=utf-8 of the response message does not match the content type of the binding

I solved this problem by setting UseCookies in web.config.

  <system.web>
    <sessionState cookieless="UseCookies" />

and setting enableVersionHeader

  <system.web>
    <httpRuntime targetFramework="4.5.1" enableVersionHeader="false" executionTimeout="1200" shutdownTimeout="1200" maxRequestLength="103424" />

How can I shrink the drawable on a button?

Using Kotlin Extension

val drawable = ContextCompat.getDrawable(context, R.drawable.my_icon)
// or resources.getDrawable(R.drawable.my_icon, theme)
val sizePx = 25
drawable?.setBounds(0, 0, sizePx, sizePx)
//                            (left,     top,  right, bottom)
my_button.setCompoundDrawables(drawable, null, null, null)

I suggest creating an extension function on TextView (Button extends it) for easy reuse.

button.leftDrawable(R.drawable.my_icon, 25)

// Button extends TextView
fun TextView.leftDrawable(@DrawableRes id: Int = 0, @DimenRes sizeRes: Int) {
    val drawable = ContextCompat.getDrawable(context, id)
    val size = context.resources.getDimensionPixelSize(sizeRes)
    drawable?.setBounds(0, 0, size, size)
    this.setCompoundDrawables(drawable, null, null, null)
}

Find files and tar them (with spaces)

Big warning on several of the solutions (and your own test) :

When you do : anything | xargs something

xargs will try to fit "as many arguments as possible" after "something", but then you may end up with multiple invocations of "something".

So your attempt: find ... | xargs tar czvf file.tgz may end up overwriting "file.tgz" at each invocation of "tar" by xargs, and you end up with only the last invocation! (the chosen solution uses a GNU -T special parameter to avoid the problem, but not everyone has that GNU tar available)

You could do instead:

find . -type f -print0 | xargs -0 tar -rvf backup.tar
gzip backup.tar

Proof of the problem on cygwin:

$ mkdir test
$ cd test
$ seq 1 10000 | sed -e "s/^/long_filename_/" | xargs touch 
    # create the files
$ seq 1 10000 | sed -e "s/^/long_filename_/" | xargs tar czvf archive.tgz
    # will invoke tar several time as it can'f fit 10000 long filenames into 1
$ tar tzvf archive.tgz | wc -l
60
    # in my own machine, I end up with only the 60 last filenames, 
    # as the last invocation of tar by xargs overwrote the previous one(s)

# proper way to invoke tar: with -r  (which append to an existing tar file, whereas c would overwrite it)
# caveat: you can't have it compressed (you can't add to a compressed archive)
$ seq 1 10000 | sed -e "s/^/long_filename_/" | xargs tar rvf archive.tar #-r, and without z
$ gzip archive.tar
$ tar tzvf archive.tar.gz | wc -l
10000 
  # we have all our files, despite xargs making several invocations of the tar command

Note: that behavior of xargs is a well know diccifulty, and it is also why, when someone wants to do :

find .... | xargs grep "regex"

they intead have to write it:

find ..... | xargs grep "regex" /dev/null

That way, even if the last invocation of grep by xargs appends only 1 filename, grep sees at least 2 filenames (as each time it has: /dev/null, where it won't find anything, and the filename(s) appended by xargs after it) and thus will always display the file names when something maches "regex". Otherwise you may end up with the last results showing matches without a filename in front.

How to set the title of UIButton as left alignment?

in xcode 8.2.1 in the interface builder it moves to:

get current date and time in groovy?

Date has the time as well, just add HH:mm:ss to the date format:

import java.text.SimpleDateFormat
def date = new Date()
def sdf = new SimpleDateFormat("MM/dd/yyyy HH:mm:ss")
println sdf.format(date)

In case you are using JRE 8 you can use LoaclDateTime:

import java.time.*

LocalDateTime t = LocalDateTime.now();
return t as String

How to initialize a static array?

Nope, no difference. It's just syntactic sugar. Arrays.asList(..) creates an additional list.

Populate a datagridview with sql query results

You may get a blank data grid if you set the data Source to a Dataset that you added to the form but is not being used. Set this to None if you are programatically setting your dataSource based on the above codes.

Java: Find .txt files in specified folder

import java.io.IOException;
import java.nio.file.FileSystems;
import java.nio.file.FileVisitResult;
import java.nio.file.Path;
import java.nio.file.PathMatcher;
import java.nio.file.SimpleFileVisitor;
import java.nio.file.attribute.BasicFileAttributes;
import java.util.ArrayList;

public class FileFinder extends SimpleFileVisitor<Path> {
    private PathMatcher matcher;
    public ArrayList<Path> foundPaths = new ArrayList<>();

    public FileFinder(String pattern) {
        matcher = FileSystems.getDefault().getPathMatcher("glob:" + pattern);
    }

    @Override
    public FileVisitResult visitFile(Path file, BasicFileAttributes attrs) throws IOException {
        Path name = file.getFileName();

        if (matcher.matches(name)) {
            foundPaths.add(file);
        }

        return FileVisitResult.CONTINUE;
    }
}

import java.io.IOException;
import java.nio.file.Files;
import java.nio.file.LinkOption;
import java.nio.file.Path;
import java.nio.file.Paths;
import java.util.ArrayList;

public class Main {
    public static void main(String[] args) throws IOException {
        Path fileDir = Paths.get("files");
        FileFinder finder = new FileFinder("*.txt");
        Files.walkFileTree(fileDir, finder);

        ArrayList<Path> foundFiles = finder.foundPaths;

        if (foundFiles.size() > 0) {
            for (Path path : foundFiles) {
                System.out.println(path.toRealPath(LinkOption.NOFOLLOW_LINKS));
            }
        } else {
            System.out.println("No files were founds!");
        }
    }
}

Creating C formatted strings (not printing them)

I haven't done this, so I'm just going to point at the right answer.

C has provisions for functions that take unspecified numbers of operands, using the <stdarg.h> header. You can define your function as void log_out(const char *fmt, ...);, and get the va_list inside the function. Then you can allocate memory and call vsprintf() with the allocated memory, format, and va_list.

Alternately, you could use this to write a function analogous to sprintf() that would allocate memory and return the formatted string, generating it more or less as above. It would be a memory leak, but if you're just logging out it may not matter.

How can I properly use a PDO object for a parameterized SELECT query

if you are using inline coding in single page and not using oops than go with this full example, it will sure help

//connect to the db
$dbh = new PDO('mysql:host=localhost;dbname=mydb', dbuser, dbpw); 

//build the query
$query="SELECT field1, field2
FROM ubertable
WHERE field1 > 6969";

//execute the query
$data = $dbh->query($query);
//convert result resource to array
$result = $data->fetchAll(PDO::FETCH_ASSOC);

//view the entire array (for testing)
print_r($result);

//display array elements
foreach($result as $output) {
echo output[field1] . " " . output[field1] . "<br />";
}

Using global variables in a function

In case you have a local variable with the same name, you might want to use the globals() function.

globals()['your_global_var'] = 42

alert() not working in Chrome

Here is a snippet that does not need ajQuery and will enable alerts in a disabled iframe (like on codepen)

for (var i = 0; i < document.getElementsByTagName('iframe').length; i++) {
    document.getElementsByTagName('iframe')[i].setAttribute('sandbox','allow-modals');
}

Here is a codepen demo working with an alert() after this fix as well: http://codepen.io/nicholasabrams/pen/vNpoBr?editors=001

Make: how to continue after a command fails?

Try the -i flag (or --ignore-errors). The documentation seems to suggest a more robust way to achieve this, by the way:

To ignore errors in a command line, write a - at the beginning of the line's text (after the initial tab). The - is discarded before the command is passed to the shell for execution.

For example,
clean:
  -rm -f *.o
This causes rm to continue even if it is unable to remove a file.

All examples are with rm, but are applicable to any other command you need to ignore errors from (i.e. mkdir).

apache mod_rewrite is not working or not enabled

Please try

sudo a2enmod rewrite

or use correct apache restart command

sudo /etc/init.d/apache2 restart

How to get the first word in the string

If you want to feel especially sly, you can write it as this:

(firstWord, rest) = yourLine.split(maxsplit=1)

This is supposed to bring the best from both worlds:

optimality tweak with maxsplit while splitting with any whitespace
improved reliability and readability, as argued by the author of the technique.

I kind of fell in love with this solution and it's general unpacking capability, so I had to share it.

In UML class diagrams, what are Boundary Classes, Control Classes, and Entity Classes?

These are class stereotypes used in analysis.

boundary classes are ones at the boundary of the system - the classes that you or other systems interact with
entity classes classes are your typical business entities like "person" and "bank account"
control classes implement some business logic or other

Get age from Birthdate

function getAge(birthday) {
    var today = new Date();
    var thisYear = 0;
    if (today.getMonth() < birthday.getMonth()) {
        thisYear = 1;
    } else if ((today.getMonth() == birthday.getMonth()) && today.getDate() < birthday.getDate()) {
        thisYear = 1;
    }
    var age = today.getFullYear() - birthday.getFullYear() - thisYear;
    return age;
}

JSFiddle

PHP convert string to hex and hex to string

Using @bill-shirley answer with a little addition

function str_to_hex($string) {
$hexstr = unpack('H*', $string);
return array_shift($hexstr);
}
function hex_to_str($string) {
return hex2bin("$string");
}

Usage:

  $str = "Go placidly amidst the noise";
  $hexstr = str_to_hex($str);// 476f20706c616369646c7920616d6964737420746865206e6f697365
  $strstr = hex_to_str($str);// Go placidly amidst the noise

Simple GUI Java calculator

This is the working code...

import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.util.*;

public class JavaCalculator extends JFrame {

    private JButton jbtNum1;
    private JButton jbtNum2;
    private JButton jbtNum3;
    private JButton jbtNum4;
    private JButton jbtNum5;
    private JButton jbtNum6;
    private JButton jbtNum7;
    private JButton jbtNum8;
    private JButton jbtNum9;
    private JButton jbtNum0;
    private JButton jbtEqual;
    private JButton jbtAdd;
    private JButton jbtSubtract;
    private JButton jbtMultiply;
    private JButton jbtDivide;
    private JButton jbtSolve;
    private JButton jbtClear;
    private double TEMP;
    private double SolveTEMP;
    private JTextField jtfResult;

    Boolean addBool = false;
    Boolean subBool = false;
    Boolean divBool = false;
    Boolean mulBool = false;

    String display = "";

    public JavaCalculator() {

        JPanel p1 = new JPanel();
        p1.setLayout(new GridLayout(4, 3));
        p1.add(jbtNum1 = new JButton("1"));
        p1.add(jbtNum2 = new JButton("2"));
        p1.add(jbtNum3 = new JButton("3"));
        p1.add(jbtNum4 = new JButton("4"));
        p1.add(jbtNum5 = new JButton("5"));
        p1.add(jbtNum6 = new JButton("6"));
        p1.add(jbtNum7 = new JButton("7"));
        p1.add(jbtNum8 = new JButton("8"));
        p1.add(jbtNum9 = new JButton("9"));
        p1.add(jbtNum0 = new JButton("0"));
        p1.add(jbtClear = new JButton("C"));

        JPanel p2 = new JPanel();
        p2.setLayout(new FlowLayout());
        p2.add(jtfResult = new JTextField(20));
        jtfResult.setHorizontalAlignment(JTextField.RIGHT);
        jtfResult.setEditable(false);

        JPanel p3 = new JPanel();
        p3.setLayout(new GridLayout(5, 1));
        p3.add(jbtAdd = new JButton("+"));
        p3.add(jbtSubtract = new JButton("-"));
        p3.add(jbtMultiply = new JButton("*"));
        p3.add(jbtDivide = new JButton("/"));
        p3.add(jbtSolve = new JButton("="));

        JPanel p = new JPanel();
        p.setLayout(new GridLayout());
        p.add(p2, BorderLayout.NORTH);
        p.add(p1, BorderLayout.SOUTH);
        p.add(p3, BorderLayout.EAST);

        add(p);

        jbtNum1.addActionListener(new ListenToOne());
        jbtNum2.addActionListener(new ListenToTwo());
        jbtNum3.addActionListener(new ListenToThree());
        jbtNum4.addActionListener(new ListenToFour());
        jbtNum5.addActionListener(new ListenToFive());
        jbtNum6.addActionListener(new ListenToSix());
        jbtNum7.addActionListener(new ListenToSeven());
        jbtNum8.addActionListener(new ListenToEight());
        jbtNum9.addActionListener(new ListenToNine());
        jbtNum0.addActionListener(new ListenToZero());

        jbtAdd.addActionListener(new ListenToAdd());
        jbtSubtract.addActionListener(new ListenToSubtract());
        jbtMultiply.addActionListener(new ListenToMultiply());
        jbtDivide.addActionListener(new ListenToDivide());
        jbtSolve.addActionListener(new ListenToSolve());
        jbtClear.addActionListener(new ListenToClear());
    } //JavaCaluclator()

    class ListenToClear implements ActionListener {
        public void actionPerformed(ActionEvent e) {
            //display = jtfResult.getText();
            jtfResult.setText("");
            addBool = false;
            subBool = false;
            mulBool = false;
            divBool = false;

            TEMP = 0;
            SolveTEMP = 0;
        }
    }

    class ListenToOne implements ActionListener {
        public void actionPerformed(ActionEvent e) {
            display = jtfResult.getText();
            jtfResult.setText(display + "1");
        }
    }

    class ListenToTwo implements ActionListener {
        public void actionPerformed(ActionEvent e) {
            display = jtfResult.getText();
            jtfResult.setText(display + "2");
        }
    }

    class ListenToThree implements ActionListener {
        public void actionPerformed(ActionEvent e) {
            display = jtfResult.getText();
            jtfResult.setText(display + "3");
        }
    }

    class ListenToFour implements ActionListener {
        public void actionPerformed(ActionEvent e) {
            display = jtfResult.getText();
            jtfResult.setText(display + "4");
        }
    }

    class ListenToFive implements ActionListener {
        public void actionPerformed(ActionEvent e) {
            display = jtfResult.getText();
            jtfResult.setText(display + "5");
        }
    }

    class ListenToSix implements ActionListener {
        public void actionPerformed(ActionEvent e) {
            display = jtfResult.getText();
            jtfResult.setText(display + "6");
        }
    }

    class ListenToSeven implements ActionListener {
        public void actionPerformed(ActionEvent e) {
            display = jtfResult.getText();
            jtfResult.setText(display + "7");
        }
    }

    class ListenToEight implements ActionListener {
        public void actionPerformed(ActionEvent e) {
            display = jtfResult.getText();
            jtfResult.setText(display + "8");
        }
    }

    class ListenToNine implements ActionListener {
        public void actionPerformed(ActionEvent e) {
            display = jtfResult.getText();
            jtfResult.setText(display + "9");
        }
    }

    class ListenToZero implements ActionListener {
        public void actionPerformed(ActionEvent e) {
            display = jtfResult.getText();
            jtfResult.setText(display + "0");
        }
    }

    class ListenToAdd implements ActionListener {
        public void actionPerformed(ActionEvent e) {
            TEMP = Double.parseDouble(jtfResult.getText());
            jtfResult.setText("");
            addBool = true;
        }
    }

    class ListenToSubtract implements ActionListener {
        public void actionPerformed(ActionEvent e) {
            TEMP = Double.parseDouble(jtfResult.getText());
            jtfResult.setText("");
            subBool = true;
        }
    }

    class ListenToMultiply implements ActionListener {
        public void actionPerformed(ActionEvent e) {
            TEMP = Double.parseDouble(jtfResult.getText());
            jtfResult.setText("");
            mulBool = true;
        }
    }

    class ListenToDivide implements ActionListener {
        public void actionPerformed(ActionEvent e) {
            TEMP = Double.parseDouble(jtfResult.getText());
            jtfResult.setText("");
            divBool = true;
        }
    }

    class ListenToSolve implements ActionListener {
        public void actionPerformed(ActionEvent e) {
            SolveTEMP = Double.parseDouble(jtfResult.getText());
            if (addBool == true)
                SolveTEMP = SolveTEMP + TEMP;
            else if ( subBool == true)
                SolveTEMP = SolveTEMP - TEMP;
            else if ( mulBool == true)
                SolveTEMP = SolveTEMP * TEMP;
            else if ( divBool == true)
                            SolveTEMP = SolveTEMP / TEMP;
            jtfResult.setText(  Double.toString(SolveTEMP));

            addBool = false;
            subBool = false;
            mulBool = false;
            divBool = false;
        }
    }

    public static void main(String[] args) {
        // TODO Auto-generated method stub
        JavaCalculator calc = new JavaCalculator();
        calc.pack();
        calc.setLocationRelativeTo(null);
                calc.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        calc.setVisible(true);
    }

} //JavaCalculator

Customize UITableView header section

Magically add Table View Header in swift

Recently I tried this.

I needed one and only one header in the whole UITableView.

Like I wanted a UIImageView on the top of the TableView. So I added a UIImageView on top of the UITableViewCell and automatically it was added as a tableViewHeader. Now I connect the ImageView to the ViewController and added the Image.

I was confused because I did something like this for the first time. So to clear my confusion open the xml format of the MainStoryBoard and found the Image View was added as a header.

It worked for me. Thanks xCode and swift.

Calculating the position of points in a circle

Here's a solution using C#:

void DrawCirclePoints(int points, double radius, Point center)
{
    double slice = 2 * Math.PI / points;
    for (int i = 0; i < points; i++)
    {
        double angle = slice * i;
        int newX = (int)(center.X + radius * Math.Cos(angle));
        int newY = (int)(center.Y + radius * Math.Sin(angle));
        Point p = new Point(newX, newY);
        Console.WriteLine(p);
    }
}

Sample output from DrawCirclePoints(8, 10, new Point(0,0));:

{X=10,Y=0}
{X=7,Y=7}
{X=0,Y=10}
{X=-7,Y=7}
{X=-10,Y=0}
{X=-7,Y=-7}
{X=0,Y=-10}
{X=7,Y=-7}

Good luck!

How do I execute a program from Python? os.system fails due to spaces in path

I suspect it's the same problem as when you use shortcuts in Windows... Try this:

import os;
os.system("\"C:\\Temp\\a b c\\Notepad.exe\" C:\\test.txt");

How to strip HTML tags from a string in SQL Server?

If your HTML is well formed, I think this is a better solution:

create function dbo.StripHTML( @text varchar(max) ) returns varchar(max) as
begin
    declare @textXML xml
    declare @result varchar(max)
    set @textXML = REPLACE( @text, '&', '' );
    with doc(contents) as
    (
        select chunks.chunk.query('.') from @textXML.nodes('/') as chunks(chunk)
    )
    select @result = contents.value('.', 'varchar(max)') from doc
    return @result
end
go

select dbo.StripHTML('This <i>is</i> an <b>html</b> test')

How to get package name from anywhere?

You can use undocumented method android.app.ActivityThread.currentPackageName() :

Class<?> clazz = Class.forName("android.app.ActivityThread");
Method method  = clazz.getDeclaredMethod("currentPackageName", null);
String appPackageName = (String) method.invoke(clazz, null);

Caveat: This must be done on the main thread of the application.

Thanks to this blog post for the idea: http://blog.javia.org/static-the-android-application-package/ .

Pure css close button

The disappointing thing here is that the "X" isn't transparent (which is how I would likely create a PNG, at least).

I put together this quick test. http://jsfiddle.net/UM3a2/22/embedded/result/ which allows you to color the positive space while leaving the negative space transparent. Since it is made entirely of borders it is easy to color since border-color defaults to the text color.

It doesn't fully support I.E. 8 and earlier (border-radius issues), but it degrades to a square fairly nicely (if you're okay with a square close button).

It also requires two HTML elements since you are only allowed two pseudo elements per selector. I don't know exactly where I learned this, but I think it was in an article by Chris Coyier.

<div id="close" class="arrow-t-b">
  Close
  <div class="arrow-l-r"> </div>
</div>

#close {
  border-width: 4px;
  border-style: solid;
  border-radius: 100%;
  color: #333;
  height: 12px;
  margin:auto;
  position: relative;
  text-indent: -9999px;
  width: 12px;
}
#close:hover {
  color: #39F;
}
.arrow-t-b:after,
.arrow-t-b:before,
.arrow-l-r:after, 
.arrow-l-r:before {
  border-color: transparent;
  border-style: solid;
  border-width: 4px;
  content: "";
  left: 2px;
  top: 0px;
  position: absolute;
}
.arrow-t-b:after {
  border-top-color: inherit;
}
.arrow-l-r:after {
  border-right-color: inherit;
  left: 4px;
  top: 2px;
}
.arrow-t-b:before {
  border-bottom-color: inherit;
  bottom: 0;
}
.arrow-l-r:before {
  border-left-color: inherit;
  left: 0;
  top: 2px;
}

How to do associative array/hashing in JavaScript

Unless you have a specific reason not to, just use a normal object. Object properties in JavaScript can be referenced using hashtable-style syntax:

var hashtable = {};
hashtable.foo = "bar";
hashtable['bar'] = "foo";

Both foo and bar elements can now then be referenced as:

hashtable['foo'];
hashtable['bar'];

// Or
hashtable.foo;
hashtable.bar;

Of course this does mean your keys have to be strings. If they're not strings they are converted internally to strings, so it may still work. Your mileage may vary.

How to read input from console in a batch file?

If you're just quickly looking to keep a cmd instance open instead of exiting immediately, simply doing the following is enough

set /p asd="Hit enter to continue"

at the end of your script and it'll keep the window open.

Note that this'll set asd as an environment variable, and can be replaced with anything else.

show distinct column values in pyspark dataframe: python

You can use df.dropDuplicates(['col1','col2']) to get only distinct rows based on colX in the array.

GridView sorting: SortDirection always Ascending

The way I did this is similar to the code that the accepted answer provided, bit is a bit different so I thought I would put it out there as well. Note that this sorting is being done to a DataTable before it is being bound to the GridView.DataSource.

Option One: Using ViewState

void DataGrid_Sorting(object sender, GridViewSortEventArgs e)
{
    if (e.SortExpression == (string)ViewState["SortColumn"])
    {
        // We are resorting the same column, so flip the sort direction
        e.SortDirection = 
            ((SortDirection)ViewState["SortColumnDirection"] == SortDirection.Ascending) ? 
            SortDirection.Descending : SortDirection.Ascending;
    }
    // Apply the sort
    this._data.DefaultView.Sort = e.SortExpression +
        (string)((e.SortDirection == SortDirection.Ascending) ? " ASC" : " DESC");
    ViewState["SortColumn"] = e.SortExpression;
    ViewState["SortColumnDirection"] = e.SortDirection;
}

Option Two: Using Session

Note that the following is being provided for legacy purposes in the event that you see it in the field, or that you are still supporting company systems that are targeting older browsers.

void DataGrid_Sorting(object sender, GridViewSortEventArgs e)
{
    if (e.SortExpression == (string)HttpContext.Current.Session["SortColumn"])
    {
        // We are resorting the same column, so flip the sort direction
        e.SortDirection = 
            ((SortDirection)HttpContext.Current.Session["SortColumnDirection"] == SortDirection.Ascending) ? 
            SortDirection.Descending : SortDirection.Ascending;
    }
    // Apply the sort
    this._data.DefaultView.Sort = e.SortExpression +
        (string)((e.SortDirection == SortDirection.Ascending) ? " ASC" : " DESC");
    HttpContext.Current.Session["SortColumn"] = e.SortExpression;
    HttpContext.Current.Session["SortColumnDirection"] = e.SortDirection;
}

Printing an int list in a single line python3

Maybe this code will help you.

>>> def sort(lists):
...     lists.sort()
...     return lists
...
>>> datalist = [6,3,4,1,3,2,9]
>>> print(*sort(datalist), end=" ")
1 2 3 3 4 6 9

you can use an empty list variable to collect the user input, with method append(). and if you want to print list in one line you can use print(*list)

Difference between string and text in rails?

If you are using oracle... STRING will be created as VARCHAR(255) column and TEXT, as a CLOB.

NATIVE_DATABASE_TYPES = {
    primary_key: "NUMBER(38) NOT NULL PRIMARY KEY",
    string: { name: "VARCHAR2", limit: 255 },
    text: { name: "CLOB" },
    ntext: { name: "NCLOB" },
    integer: { name: "NUMBER", limit: 38 },
    float: { name: "BINARY_FLOAT" },
    decimal: { name: "DECIMAL" },
    datetime: { name: "TIMESTAMP" },
    timestamp: { name: "TIMESTAMP" },
    timestamptz: { name: "TIMESTAMP WITH TIME ZONE" },
    timestampltz: { name: "TIMESTAMP WITH LOCAL TIME ZONE" },
    time: { name: "TIMESTAMP" },
    date: { name: "DATE" },
    binary: { name: "BLOB" },
    boolean: { name: "NUMBER", limit: 1 },
    raw: { name: "RAW", limit: 2000 },
    bigint: { name: "NUMBER", limit: 19 }
}

https://github.com/rsim/oracle-enhanced/blob/master/lib/active_record/connection_adapters/oracle_enhanced_adapter.rb

Using git commit -a with vim

Try ZZ to save and close. Here is a bit more info on using vim with Git

PHP cURL GET request and request's body

For those coming to this with similar problems, this request library allows you to make external http requests seemlessly within your php application. Simplified GET, POST, PATCH, DELETE and PUT requests.

A sample request would be as below

use Libraries\Request;

$data = [
  'samplekey' => 'value',
  'otherkey' => 'othervalue'
];

$headers = [
  'Content-Type' => 'application/json',
  'Content-Length' => sizeof($data)
];

$response = Request::post('https://example.com', $data, $headers);
// the $response variable contains response from the request

Documentation for the same can be found in the project's README.md

Select datatype of the field in postgres

Try this request :

SELECT column_name, data_type FROM information_schema.columns WHERE 
table_name = 'YOUR_TABLE' AND column_name = 'YOUR_FIELD';

XAMPP keeps showing Dashboard/Welcome Page instead of the Configuration Page

Delete the file(index.php) from your xampp folder, you will get the list of directories and files from htdocs folder.

Executing periodic actions in Python

This will insert a 10 second sleep in between every call to foo(), which is approximately what you asked for should the call complete quickly.

import time

while True:
    foo()
    time.sleep(10)

To do other things while your foo() is being called in a background thread

import time
import sys
import threading

def foo():
    sys.stdout.write('({}) foo\n'.format(time.ctime()))

def foo_target():
    while True:
        foo()
        time.sleep(10)

t = threading.Thread(target=foo_target)
t.daemon = True
t.start()
print('doing other things...')

How to read barcodes with the camera on Android?

I had an issue with the parseActivityForResult arguments. I got this to work:

package JMA.BarCodeScanner;

import android.app.Activity;
import android.content.Intent;
import android.os.Bundle;
import android.util.Log;
import android.view.View;
import android.widget.Button;
import android.widget.TextView;

public class JMABarcodeScannerActivity extends Activity {

    Button captureButton;
    TextView tvContents;
    TextView tvFormat;
    Activity activity;

    @Override
    public void onCreate(Bundle savedInstanceState) {
        super.onCreate(savedInstanceState);
        setContentView(R.layout.main);

        activity = this;
        captureButton = (Button)findViewById(R.id.capture);
        captureButton.setOnClickListener(listener);
        tvContents = (TextView)findViewById(R.id.tvContents);
        tvFormat = (TextView)findViewById(R.id.tvFormat);
    }

    public void onActivityResult(int requestCode, int resultCode, Intent intent) 
    {  
        switch (requestCode) 
        {
            case IntentIntegrator.REQUEST_CODE:
            if (resultCode == Activity.RESULT_OK) 
            {
                IntentResult intentResult = IntentIntegrator.parseActivityResult(requestCode, resultCode, intent);

                if (intentResult != null) 
                {
                   String contents = intentResult.getContents();
                   String format = intentResult.getFormatName();
                   tvContents.setText(contents.toString());
                   tvFormat.setText(format.toString());

                   //this.elemQuery.setText(contents);
                   //this.resume = false;
                   Log.d("SEARCH_EAN", "OK, EAN: " + contents + ", FORMAT: " + format);
                } else {
                    Log.e("SEARCH_EAN", "IntentResult je NULL!");
                }
            } 
            else if (resultCode == Activity.RESULT_CANCELED) {
                Log.e("SEARCH_EAN", "CANCEL");
            }
        }
    }

    private View.OnClickListener listener = new View.OnClickListener() {
        @Override
        public void onClick(View v) {
             IntentIntegrator integrator = new IntentIntegrator(activity);
             integrator.initiateScan();
        }
    };
}

Latyout for Activity:

<?xml version="1.0" encoding="utf-8"?>
<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
    android:orientation="vertical"
    android:layout_width="fill_parent"
    android:layout_height="fill_parent">
    <Button
        android:id="@+id/capture"
        android:layout_width="fill_parent"
        android:layout_height="wrap_content"
        android:text="Take a Picture"/>

    <TextView xmlns:android="http://schemas.android.com/apk/res/android"
        android:id="@+id/tvContents"
        android:layout_width="wrap_content"
        android:layout_height="wrap_content"/>

    <TextView xmlns:android="http://schemas.android.com/apk/res/android"
        android:id="@+id/tvFormat"
        android:layout_width="wrap_content"
        android:layout_height="wrap_content"/>
</LinearLayout>

Android; Check if file exists without creating a new one

When you use this code, you are not creating a new File, it's just creating an object reference for that file and testing if it exists or not.

File file = new File(filePath);
if(file.exists()) 
    //do something

Support for ES6 in Internet Explorer 11

The statement from Microsoft regarding the end of Internet Explorer 11 support mentions that it will continue to receive security updates, compatibility fixes, and technical support until its end of life. The wording of this statement leads me to believe that Microsoft has no plans to continue adding features to Internet Explorer 11, and instead will be focusing on Edge.

If you require ES6 features in Internet Explorer 11, check out a transpiler such as Babel.

What are MVP and MVC and what is the difference?

They each addresses different problems and can even be combined together to have something like below

The Combined Pattern

There is also a complete comparison of MVC, MVP and MVVM here

fatal: The current branch master has no upstream branch

First use git pull origin your_branch_name Then use git push origin your_branch_name

Conditional Logic on Pandas DataFrame

In [1]: df
Out[1]:
   data
0     1
1     2
2     3
3     4

You want to apply a function that conditionally returns a value based on the selected dataframe column.

In [2]: df['data'].apply(lambda x: 'true' if x <= 2.5 else 'false')
Out[2]:
0     true
1     true
2    false
3    false
Name: data

You can then assign that returned column to a new column in your dataframe:

In [3]: df['desired_output'] = df['data'].apply(lambda x: 'true' if x <= 2.5 else 'false')

In [4]: df
Out[4]:
   data desired_output
0     1           true
1     2           true
2     3          false
3     4          false

Rename column SQL Server 2008

Try:

EXEC sp_rename 'TableName.OldName', 'NewName', 'COLUMN'

How to add google-services.json in Android?

It should be on Project -> app folder

Please find the screenshot from Firebase website

Detect Scroll Up & Scroll down in ListView

Here's what I would try first:

1) Create an interface (let's call it OnScrollTopOrBottomListener) with these methods:

void onScrollTop();

void onScrollBottom();

2) In your list's adapter, add a member instance, typed as the interface you created and supply a setter and getter.

3) In the getView() implementation of your adapter, check if the position parameter is either 0 or getCount() - 1. Also check that your OnScrollTopOrBottomListener instance is not null.

4) If the position is 0, call onScrollTopOrBottomListener.onScrollTop(). If position is getCount() - 1, call onScrollTopOrBottomListener.onScrollBottom().

5) In your OnScrollTopOrBottomListener implementation, call the appropriate methods to get the desired data.

Hope that helps in some way.

-Brandon

Install Qt on Ubuntu

In Ubuntu 18.04 the QtCreator examples and API docs missing, This is my way to solve this problem, should apply to almost every Ubuntu release.

For QtCreator and Examples and API Docs:

sudo apt install `apt-cache search 5-examples | grep qt | grep example | awk '{print $1 }' | xargs `

sudo apt install `apt-cache search 5-doc | grep "Qt 5 " | awk '{print $1}' | xargs`

sudo apt-get install build-essential qtcreator qt5-default

If something is also missing, then:

sudo apt install `apt-cache search qt | grep 5- | grep ^qt | awk '{print $1}' | xargs `

Hope to be helpful.

Also posted in Ask Ubuntu: https://askubuntu.com/questions/450983/ubuntu-14-04-qtcreator-qt5-examples-missing

Android Respond To URL in Intent

You might need to allow different combinations of data in your intent filter to get it to work in different cases (http/ vs https/, www. vs no www., etc).

For example, I had to do the following for an app which would open when the user opened a link to Google Drive forms (www.docs.google.com/forms)

Note that path prefix is optional.

        <intent-filter>
            <action android:name="android.intent.action.VIEW" />
            <category android:name="android.intent.category.DEFAULT" />
            <category android:name="android.intent.category.BROWSABLE" />

            <data android:scheme="http" />
            <data android:scheme="https" />

            <data android:host="www.docs.google.com" />
            <data android:host="docs.google.com" />

            <data android:pathPrefix="/forms" />
        </intent-filter>

Kubernetes Pod fails with CrashLoopBackOff

Pod is not started due to problem coming after initialization of POD.

Check and use command to get docker container of pod

docker ps -a | grep private-reg

Output will be information of docker container with id.

See docker logs:

docker logs -f <container id>

pod has unbound PersistentVolumeClaims

You have to define a PersistentVolume providing disc space to be consumed by the PersistentVolumeClaim.

When using storageClass Kubernetes is going to enable "Dynamic Volume Provisioning" which is not working with the local file system.

To solve your issue:

Provide a PersistentVolume fulfilling the constraints of the claim (a size >= 100Mi)
Remove the storageClass-line from the PersistentVolumeClaim
Remove the StorageClass from your cluster

How do these pieces play together?

At creation of the deployment state-description it is usually known which kind (amount, speed, ...) of storage that application will need.
To make a deployment versatile you'd like to avoid a hard dependency on storage. Kubernetes' volume-abstraction allows you to provide and consume storage in a standardized way.

The PersistentVolumeClaim is used to provide a storage-constraint alongside the deployment of an application.

The PersistentVolume offers cluster-wide volume-instances ready to be consumed ("bound"). One PersistentVolume will be bound to one claim. But since multiple instances of that claim may be run on multiple nodes, that volume may be accessed by multiple nodes.

A PersistentVolume without StorageClass is considered to be static.

"Dynamic Volume Provisioning" alongside with a StorageClass allows the cluster to provision PersistentVolumes on demand. In order to make that work, the given storage provider must support provisioning - this allows the cluster to request the provisioning of a "new" PersistentVolume when an unsatisfied PersistentVolumeClaim pops up.

Example PersistentVolume

In order to find how to specify things you're best advised to take a look at the API for your Kubernetes version, so the following example is build from the API-Reference of K8S 1.17:

apiVersion: v1
kind: PersistentVolume
metadata:
  name: ckan-pv-home
  labels:
    type: local
spec:
  capacity:
    storage: 100Mi
  hostPath:
    path: "/mnt/data/ckan"

The PersistentVolumeSpec allows us to define multiple attributes. I chose a hostPath volume which maps a local directory as content for the volume. The capacity allows the resource scheduler to recognize this volume as applicable in terms of resource needs.

Additional Resources:

Configure PersistentVolume Guide

Comparing two strings, ignoring case in C#

My general answer to this kind of question on "efficiency" is almost always, which ever version of the code is most readable, is the most efficient.

That being said, I think (val.ToLowerCase() == "astringvalue") is pretty understandable at a glance by most people.

The efficience I refer to is not necesseraly in the execution of the code but rather in the maintanance and generally readability of the code in question.

A non-blocking read on a subprocess.PIPE in Python

Existing solutions did not work for me (details below). What finally worked was to implement readline using read(1) (based on this answer). The latter does not block:

from subprocess import Popen, PIPE
from threading import Thread
def process_output(myprocess): #output-consuming thread
    nextline = None
    buf = ''
    while True:
        #--- extract line using read(1)
        out = myprocess.stdout.read(1)
        if out == '' and myprocess.poll() != None: break
        if out != '':
            buf += out
            if out == '\n':
                nextline = buf
                buf = ''
        if not nextline: continue
        line = nextline
        nextline = None

        #--- do whatever you want with line here
        print 'Line is:', line
    myprocess.stdout.close()

myprocess = Popen('myprogram.exe', stdout=PIPE) #output-producing process
p1 = Thread(target=process_output, args=(dcmpid,)) #output-consuming thread
p1.daemon = True
p1.start()

#--- do whatever here and then kill process and thread if needed
if myprocess.poll() == None: #kill process; will automatically stop thread
    myprocess.kill()
    myprocess.wait()
if p1 and p1.is_alive(): #wait for thread to finish
    p1.join()

Why existing solutions did not work:

Solutions that require readline (including the Queue based ones) always block. It is difficult (impossible?) to kill the thread that executes readline. It only gets killed when the process that created it finishes, but not when the output-producing process is killed.
Mixing low-level fcntl with high-level readline calls may not work properly as anonnn has pointed out.
Using select.poll() is neat, but doesn't work on Windows according to python docs.
Using third-party libraries seems overkill for this task and adds additional dependencies.

If input value is blank, assign a value of "empty" with Javascript

You can do this:

var getValue  = function (input, defaultValue) {
    return input.value || defaultValue;
};

Binary numbers in Python

Binary, decimal, hexadecimal... the base only matters when reading or outputting numbers, adding binary numbers is just the same as adding decimal number : it is just a matter of representation.

Reading InputStream as UTF-8

Solved my own problem. This line:

BufferedReader in = new BufferedReader(new InputStreamReader(url.openStream()));

needs to be:

BufferedReader in = new BufferedReader(new InputStreamReader(url.openStream(), "UTF-8"));

or since Java 7:

BufferedReader in = new BufferedReader(new InputStreamReader(url.openStream(), StandardCharsets.UTF_8));

Creating a mock HttpServletRequest out of a url string?

Here it is how to use MockHttpServletRequest:

// given
MockHttpServletRequest request = new MockHttpServletRequest();
request.setServerName("www.example.com");
request.setRequestURI("/foo");
request.setQueryString("param1=value1&param");

// when
String url = request.getRequestURL() + '?' + request.getQueryString(); // assuming there is always queryString.

// then
assertThat(url, is("http://www.example.com:80/foo?param1=value1&param"));

Python string to unicode

Unicode escapes only work in unicode strings, so this

 a="\u2026"

is actually a string of 6 characters: '\', 'u', '2', '0', '2', '6'.

To make unicode out of this, use decode('unicode-escape'):

a="\u2026"
print repr(a)
print repr(a.decode('unicode-escape'))

## '\\u2026'
## u'\u2026'

When should one use a spinlock instead of mutex?

The Theory

In theory, when a thread tries to lock a mutex and it does not succeed, because the mutex is already locked, it will go to sleep, immediately allowing another thread to run. It will continue to sleep until being woken up, which will be the case once the mutex is being unlocked by whatever thread was holding the lock before. When a thread tries to lock a spinlock and it does not succeed, it will continuously re-try locking it, until it finally succeeds; thus it will not allow another thread to take its place (however, the operating system will forcefully switch to another thread, once the CPU runtime quantum of the current thread has been exceeded, of course).

The Problem

The problem with mutexes is that putting threads to sleep and waking them up again are both rather expensive operations, they'll need quite a lot of CPU instructions and thus also take some time. If now the mutex was only locked for a very short amount of time, the time spent in putting a thread to sleep and waking it up again might exceed the time the thread has actually slept by far and it might even exceed the time the thread would have wasted by constantly polling on a spinlock. On the other hand, polling on a spinlock will constantly waste CPU time and if the lock is held for a longer amount of time, this will waste a lot more CPU time and it would have been much better if the thread was sleeping instead.

The Solution

Using spinlocks on a single-core/single-CPU system makes usually no sense, since as long as the spinlock polling is blocking the only available CPU core, no other thread can run and since no other thread can run, the lock won't be unlocked either. IOW, a spinlock wastes only CPU time on those systems for no real benefit. If the thread was put to sleep instead, another thread could have ran at once, possibly unlocking the lock and then allowing the first thread to continue processing, once it woke up again.

On a multi-core/multi-CPU systems, with plenty of locks that are held for a very short amount of time only, the time wasted for constantly putting threads to sleep and waking them up again might decrease runtime performance noticeably. When using spinlocks instead, threads get the chance to take advantage of their full runtime quantum (always only blocking for a very short time period, but then immediately continue their work), leading to much higher processing throughput.

The Practice

Since very often programmers cannot know in advance if mutexes or spinlocks will be better (e.g. because the number of CPU cores of the target architecture is unknown), nor can operating systems know if a certain piece of code has been optimized for single-core or multi-core environments, most systems don't strictly distinguish between mutexes and spinlocks. In fact, most modern operating systems have hybrid mutexes and hybrid spinlocks. What does that actually mean?

A hybrid mutex behaves like a spinlock at first on a multi-core system. If a thread cannot lock the mutex, it won't be put to sleep immediately, since the mutex might get unlocked pretty soon, so instead the mutex will first behave exactly like a spinlock. Only if the lock has still not been obtained after a certain amount of time (or retries or any other measuring factor), the thread is really put to sleep. If the same code runs on a system with only a single core, the mutex will not spinlock, though, as, see above, that would not be beneficial.

A hybrid spinlock behaves like a normal spinlock at first, but to avoid wasting too much CPU time, it may have a back-off strategy. It will usually not put the thread to sleep (since you don't want that to happen when using a spinlock), but it may decide to stop the thread (either immediately or after a certain amount of time) and allow another thread to run, thus increasing chances that the spinlock is unlocked (a pure thread switch is usually less expensive than one that involves putting a thread to sleep and waking it up again later on, though not by far).

Summary

If in doubt, use mutexes, they are usually the better choice and most modern systems will allow them to spinlock for a very short amount of time, if this seems beneficial. Using spinlocks can sometimes improve performance, but only under certain conditions and the fact that you are in doubt rather tells me, that you are not working on any project currently where a spinlock might be beneficial. You might consider using your own "lock object", that can either use a spinlock or a mutex internally (e.g. this behavior could be configurable when creating such an object), initially use mutexes everywhere and if you think that using a spinlock somewhere might really help, give it a try and compare the results (e.g. using a profiler), but be sure to test both cases, a single-core and a multi-core system before you jump to conclusions (and possibly different operating systems, if your code will be cross-platform).

Update: A Warning for iOS

Actually not iOS specific but iOS is the platform where most developers may face that problem: If your system has a thread scheduler, that does not guarantee that any thread, no matter how low its priority may be, will eventually get a chance to run, then spinlocks can lead to permanent deadlocks. The iOS scheduler distinguishes different classes of threads and threads on a lower class will only run if no thread in a higher class wants to run as well. There is no back-off strategy for this, so if you permanently have high class threads available, low class threads will never get any CPU time and thus never any chance to perform any work.

The problem appears as follow: Your code obtains a spinlock in a low prio class thread and while it is in the middle of that lock, the time quantum has exceeded and the thread stops running. The only way how this spinlock can be released again is if that low prio class thread gets CPU time again but this is not guaranteed to happen. You may have a couple of high prio class threads that constantly want to run and the task scheduler will always prioritize those. One of them may run across the spinlock and try to obtain it, which isn't possible of course, and the system will make it yield. The problem is: A thread that yielded is immediately available for running again! Having a higher prio than the thread holding the lock, the thread holding the lock has no chance to get CPU runtime. Either some other thread will get runtime or the thread that just yielded.

Why does this problem not occur with mutexes? When the high prio thread cannot obtain the mutex, it won't yield, it may spin a bit but will eventually be sent to sleep. A sleeping thread is not available for running until it is woken up by an event, e.g. an event like the mutex being unlocked it has been waiting for. Apple is aware of that problem and has thus deprecated OSSpinLock as a result. The new lock is called os_unfair_lock. This lock avoids the situation mentioned above as it is aware of the different thread priority classes. If you are sure that using spinlocks is a good idea in your iOS project, use that one. Stay away from OSSpinLock! And under no circumstances implement your own spinlocks in iOS! If in doubt, use a mutex! macOS is not affected by this issue as it has a different thread scheduler that won't allow any thread (even low prio threads) to "run dry" on CPU time, still the same situation can arise there and will then lead to very poor performance, thus OSSpinLock is deprecated on macOS as well.

How to use store and use session variables across pages?

Sessions Step By Step

Defining session before everything, No output should be before that, NO OUTPUT
```
<?php
session_start();
?>
```

Set your session inside a page and then you have access in that page. For example this is page 1.php

<?php
   //This is page 1 and then we will use session that defined from this page:
    session_start();
    $_SESSION['email']='[email protected]';
?>

Using and Getting session in 2.php

 <?php

//In this page I am going to use session:

  session_start();
  if($_SESSION['email']){
  echo 'Your Email Is Here!  :) ';
  }
 ?>

NOTE: Comments don't have output.

adb not finding my device / phone (MacOS X)

Try rebooting (if it was ever detected before and stopped showing up) - the mother of all solutions!

center MessageBox in parent form

From a comment on Joel Spolsky's blog:

A Messagebox is always centered on the screen. You can provide an owner, but that is just for Z-order, not centering. The only way is to use Win32 hooks and center it yourself. You can find code doing that online if you search for it.

Much easier is to just write your own message box class and add centering functionality. Then you can also add default captioning, Do not show again-checkbox and making them modeless.

"Win32 hooks" probably refers to using SetWindowsHookEx as shown in this example.

How to pass parameters to ThreadStart method in Thread?

You want to use the ParameterizedThreadStart delegate for thread methods that take parameters. (Or none at all actually, and let the Thread constructor infer.)

Example usage:

var thread = new Thread(new ParameterizedThreadStart(download));
//var thread = new Thread(download); // equivalent

thread.Start(filename)

How to use ng-if to test if a variable is defined

I edited your plunker to include ABOS's solution.

<body ng-controller="MainCtrl">
    <ul ng-repeat='item in items'>
      <li ng-if='item.color'>The color is {{item.color}}</li>
      <li ng-if='item.shipping !== undefined'>The shipping cost is {{item.shipping}}</li>
    </ul>
  </body>

plunkerFork

How to hide a navigation bar from first ViewController in Swift?

You can do it from the window controller (Swift3)

class WindowController: NSWindowController {

    override func windowDidLoad() {
        super.windowDidLoad()

        window?.titleVisibility = .hidden
    }
}

How to play a sound using Swift?

Game style:

file Sfx.swift

import AVFoundation

public let sfx = Sfx.shared
public final class Sfx: NSObject {
    
    static let shared = Sfx()
    
    var apCheer: AVAudioPlayer? = nil
    
    private override init() {
        guard let s = Bundle.main.path(forResource: "cheer", ofType: "mp3") else {
            return  print("Sfx woe")
        }
        do {
            apComment = try AVAudioPlayer(contentsOf: URL(fileURLWithPath: s))
        } catch {
            return  print("Sfx woe")
        }
    }
    
    func cheer() { apCheer?.play() }
    func plonk() { apPlonk?.play() }
    func crack() { apCrack?.play() } .. etc
}

Anywhere at all in code

sfx.explosion()
sfx.cheer()

Best way of invoking getter by reflection

You can invoke reflections and also, set order of sequence for getter for values through annotations

public class Student {

    private String grade;

    private String name;

    private String id;

    private String gender;

    private Method[] methods;

    @Retention(RetentionPolicy.RUNTIME)
    public @interface Order {
        int value();
    }

    /**
     * Sort methods as per Order Annotations
     * 
     * @return
     */
    private void sortMethods() {

        methods = Student.class.getMethods();

        Arrays.sort(methods, new Comparator<Method>() {
            public int compare(Method o1, Method o2) {
                Order or1 = o1.getAnnotation(Order.class);
                Order or2 = o2.getAnnotation(Order.class);
                if (or1 != null && or2 != null) {
                    return or1.value() - or2.value();
                }
                else if (or1 != null && or2 == null) {
                    return -1;
                }
                else if (or1 == null && or2 != null) {
                    return 1;
                }
                return o1.getName().compareTo(o2.getName());
            }
        });
    }

    /**
     * Read Elements
     * 
     * @return
     */
    public void readElements() {
        int pos = 0;
        /**
         * Sort Methods
         */
        if (methods == null) {
            sortMethods();
        }
        for (Method method : methods) {
            String name = method.getName();
            if (name.startsWith("get") && !name.equalsIgnoreCase("getClass")) {
                pos++;
                String value = "";
                try {
                    value = (String) method.invoke(this);
                }
                catch (IllegalAccessException | IllegalArgumentException | InvocationTargetException e) {
                    e.printStackTrace();
                }
                System.out.println(name + " Pos: " + pos + " Value: " + value);
            }
        }
    }

    // /////////////////////// Getter and Setter Methods

    /**
     * @param grade
     * @param name
     * @param id
     * @param gender
     */
    public Student(String grade, String name, String id, String gender) {
        super();
        this.grade = grade;
        this.name = name;
        this.id = id;
        this.gender = gender;
    }

    /**
     * @return the grade
     */
    @Order(value = 4)
    public String getGrade() {
        return grade;
    }

    /**
     * @param grade the grade to set
     */
    public void setGrade(String grade) {
        this.grade = grade;
    }

    /**
     * @return the name
     */
    @Order(value = 2)
    public String getName() {
        return name;
    }

    /**
     * @param name the name to set
     */
    public void setName(String name) {
        this.name = name;
    }

    /**
     * @return the id
     */
    @Order(value = 1)
    public String getId() {
        return id;
    }

    /**
     * @param id the id to set
     */
    public void setId(String id) {
        this.id = id;
    }

    /**
     * @return the gender
     */
    @Order(value = 3)
    public String getGender() {
        return gender;
    }

    /**
     * @param gender the gender to set
     */
    public void setGender(String gender) {
        this.gender = gender;
    }

    /**
     * Main
     * 
     * @param args
     * @throws IOException
     * @throws SQLException
     * @throws InvocationTargetException
     * @throws IllegalArgumentException
     * @throws IllegalAccessException
     */
    public static void main(String args[]) throws IOException, SQLException, IllegalAccessException,
            IllegalArgumentException, InvocationTargetException {
        Student student = new Student("A", "Anand", "001", "Male");
        student.readElements();
    }
  }

Output when sorted

getId Pos: 1 Value: 001
getName Pos: 2 Value: Anand
getGender Pos: 3 Value: Male
getGrade Pos: 4 Value: A

Setting Java heap space under Maven 2 on Windows

The environment variable to set is MAVEN_OPTS, for example MAVEN_OPTS=-Xmx1024m. The maxmem configuration in the pom only applies when you set the compiler plugin to fork javac into a new JVM. Otherwise the plugin runs inside the same VM as Maven and thus within the memory passed on the command line via the MAVEN_OPTS.

To set MAVEN_OPTS under Windows 7:

Right click on My Computer and select Properties (keyboard shortcut press Windows + Pause/Break)
Click the Advanced System Settings link located in the left navigation of System Properties to display the Advanced System Properties
Go to the Advanced tab and click the Environment Variables button located at the bottom of the Advanced System Properties configuration window
Create a New user variable, set the Variable name to MAVEN_OPTS and set the Variable value to -Xmx1024m (or more)

Open a new command window and run mvn.

Passing null arguments to C# methods

Yes. There are two kinds of types in .NET: reference types and value types.

References types (generally classes) are always referred to by references, so they support null without any extra work. This means that if a variable's type is a reference type, the variable is automatically a reference.

Value types (e.g. int) by default do not have a concept of null. However, there is a wrapper for them called Nullable. This enables you to encapsulate the non-nullable value type and include null information.

The usage is slightly different, though.

// Both of these types mean the same thing, the ? is just C# shorthand.
private void Example(int? arg1, Nullable<int> arg2)
{
    if (arg1.HasValue)
        DoSomething();

    arg1 = null; // Valid.
    arg1 = 123;  // Also valid.

    DoSomethingWithInt(arg1); // NOT valid!
    DoSomethingWithInt(arg1.Value); // Valid.
}

Android/Eclipse: how can I add an image in the res/drawable folder?

Open folder path of Android application, open src folder then Add your image in /res/drawable folder

How to get the background color of an HTML element?

This worked for me:

var backgroundColor = window.getComputedStyle ? window.getComputedStyle(myDiv, null).getPropertyValue("background-color") : myDiv.style.backgroundColor;

And, even better:

var getStyle = function(element, property) {
    return window.getComputedStyle ? window.getComputedStyle(element, null).getPropertyValue(property) : element.style[property.replace(/-([a-z])/g, function (g) { return g[1].toUpperCase(); })];
};
var backgroundColor = getStyle(myDiv, "background-color");

Loop through each cell in a range of cells when given a Range object

I'm resurrecting the dead here, but because a range can be defined as "A:A", using a for each loop ends up with a potential infinite loop. The solution, as far as I know, is to use the Do Until loop.

Do Until Selection.Value = ""
  Rem Do things here...
Loop

Combine Date and Time columns using python pandas

Here is a one liner, to do it. You simply concatenate the two string in each of the column with a " " space in between.

Say df is your dataframe and columns are 'Time' and 'Date'. And your new column is DateAndTime.

df['DateAndTime'] = df['Date'].str.cat(df['Time'],sep=" ")

And if you also wanna handle entries like datetime objects, you can do this. You can tweak the formatting as per your needs.

df['DateAndTime'] = pd.to_datetime(df['DateAndTime'], format="%m/%d/%Y %I:%M:%S %p")

Cheers!! Happy Data Crunching.

calling another method from the main method in java

This is a fundamental understanding in Java, but can be a little tricky to new programmers. Do a little research on the difference between a static and instance method. The basic difference is the instance method do() is only accessible to a instance of the class foo.

You must instantiate (create an instance of) the class, creating an object, that you use to call the instance method.

I have included your example with a couple comments and example.

public class SomeName {

//this is a static method and cannot call an instance method without a object
public static void main(String[] args){

    // can't do this from this static method, no object reference
    // someMethod();

    //create instance of object
    SomeName thisObj = new SomeName();
    //call instance method using object
    thisObj.someMethod();
}

//instance method
public void someMethod(){
    System.out.print("some message...");
}

}// end class SomeName

What's with the dollar sign ($"string")

String Interpolation

is a concept that languages like Perl have had for quite a while, and now we’ll get this ability in C# as well. In String Interpolation, we simply prefix the string with a $ (much like we use the @ for verbatim strings). Then, we simply surround the expressions we want to interpolate with curly braces (i.e. { and }):

It looks a lot like the String.Format() placeholders, but instead of an index, it is the expression itself inside the curly braces. In fact, it shouldn’t be a surprise that it looks like String.Format() because that’s really all it is – syntactical sugar that the compiler treats like String.Format() behind the scenes.

A great part is, the compiler now maintains the placeholders for you so you don’t have to worry about indexing the right argument because you simply place it right there in the string.

C# string interpolation is a method of concatenating,formatting and manipulating strings. This feature was introduced in C# 6.0. Using string interpolation, we can use objects and expressions as a part of the string interpolation operation.

Syntax of string interpolation starts with a ‘$’ symbol and expressions are defined within a bracket {} using the following syntax.

{<interpolatedExpression>[,<alignment>][:<formatString>]}

Where:

interpolatedExpression - The expression that produces a result to be formatted
alignment - The constant expression whose value defines the minimum number of characters in the string representation of the result of the interpolated expression. If positive, the string representation is right-aligned; if negative, it's left-aligned.
formatString - A format string that is supported by the type of the expression result.

The following code example concatenates a string where an object, author as a part of the string interpolation.

string author = "Mohit";  
string hello = $"Hello {author} !";  
Console.WriteLine(hello);  // Hello Mohit !

Can you write nested functions in JavaScript?

Not only can you return a function which you have passed into another function as a variable, you can also use it for calculation inside but defining it outside. See this example:

    function calculate(a,b,fn) {
      var c = a * 3 + b + fn(a,b);
      return  c;
    }

    function sum(a,b) {
      return a+b;
    }

    function product(a,b) {
      return a*b;
    }

    document.write(calculate (10,20,sum)); //80
    document.write(calculate (10,20,product)); //250

Difference between DTO, VO, POJO, JavaBeans?

DTO vs VO

DTO - Data transfer objects are just data containers which are used to transport data between layers and tiers.

It mainly contains attributes. You can even use public attributes without getters and setters.
Data transfer objects do not contain any business logic.

Analogy:
Simple Registration form with attributes username, password and email id.

When this form is submitted in RegistrationServlet file you will get all the attributes from view layer to business layer where you pass the attributes to java beans and then to the DAO or the persistence layer.

DTO's helps in transporting the attributes from view layer to business layer and finally to the persistence layer.

DTO was mainly used to get data transported across the network efficiently, it may be even from JVM to another JVM.

DTOs are often java.io.Serializable - in order to transfer data across JVM.

VO - A Value Object [1][2] represents itself a fixed set of data and is similar to a Java enum. A Value Object's identity is based on their state rather than on their object identity and is immutable. A real world example would be Color.RED, Color.BLUE, SEX.FEMALE etc.

POJO vs JavaBeans

[1] The Java-Beanness of a POJO is that its private attributes are all accessed via public getters and setters that conform to the JavaBeans conventions. e.g.

    private String foo;
    public String getFoo(){...}
    public void setFoo(String foo){...};

[2] JavaBeans must implement Serializable and have a no-argument constructor, whereas in POJO does not have these restrictions.

MySQL Workbench: How to keep the connection alive

From the now unavailable internet archive:

Go to Edit -> Preferences -> SQL Editor and set to a higher value this parameter: DBMS connection read time out (in seconds). For instance: 86400.

Close and reopen MySQL Workbench. Kill your previously query that probably is running and run the query again.

Where is Python language used?

All the languages you've mentioned are Turing Complete, so in theory there is nothing one can do and another can't. In practice of course, there are differences, especially in productivity and efficiency. Compared to C, C++ and Java, which are static typed, Python is a dynamic language and can help you write the same code in significantly fewer lines. Python has a moto "batteries included", which means that the standard library offers all the things needed to build a complex application. Other languages would need external libraries for this. On top of this, since Python is an old and mature language (older than Java), many external libraries (for game development and scientific calculations just to mention a few) have been evolved. So Python can be used to program desktop applications and in fact in some cases more efficiently than other traditional languages.

Python is also a scripting language. This means that you can easily and quickly write scripts and simple tests with it.

More recently python is also used for web frameworks. Since there is a big code base and many python programmers, this was a logical thing to do. These web frameworks follow the practice mainly introduced by Ruby on Rails.

Create a new RGB OpenCV image using Python?

CreateImage(size, depth, channels)

https://opencv.willowgarage.com/documentation/python/core_operations_on_arrays.html#CreateImage

Adding to the classpath on OSX

In OSX, you can set the classpath from scratch like this:

export CLASSPATH=/path/to/some.jar:/path/to/some/other.jar

Or you can add to the existing classpath like this:

export CLASSPATH=$CLASSPATH:/path/to/some.jar:/path/to/some/other.jar

This is answering your exact question, I'm not saying it's the right or wrong thing to do; I'll leave that for others to comment upon.

IF EXISTS in T-SQL

Yes it stops execution so this is generally preferable to HAVING COUNT(*) > 0 which often won't.

With EXISTS if you look at the execution plan you will see that the actual number of rows coming out of table1 will not be more than 1 irrespective of number of matching records.

In some circumstances SQL Server can convert the tree for the COUNT query to the same as the one for EXISTS during the simplification phase (with a semi join and no aggregate operator in sight) an example of that is discussed in the comments here.

For more complicated sub trees than shown in the question you may occasionally find the COUNT performs better than EXISTS however. Because the semi join needs only retrieve one row from the sub tree this can encourage a plan with nested loops for that part of the tree - which may not work out optimal in practice.

Javascript, viewing [object HTMLInputElement]

It's not because you are using alert, it will happen when use document.write() too. This problem generally arises when you name your id or class of any tag as same as any variable which you are using in you javascript code. Try by changing either the javascript variable name or by changing your tag's id/class name.

My code example: bank.html

<!doctype html>
<html>
<head>
    <title>Transaction Tracker</title>
    <script src="bank.js"></script> 
</head>
    <body>
        <div><button onclick="bitch()">Press me!</button></div>
    </body>
</html>

Javascript code: bank.js

function bitch(){ amt = 0;
var a = Math.random(); ran = Math.floor(a * 100);
return ran; }

function all(){
amt = amt + bitch(); document.write(amt + "
"); } setInterval(all,2000);

you can have a look and understand the concept from my code. Here i have used a variable named 'amt' in JS. You just try to run my code. It will work fine but as you put an [id="amt"](without square brackets) (which is a variable name in JS code )for div tag in body of html you will see the same error that you are talking about. So simple solution is to change either the variable name or the id or class name.

How to move text up using CSS when nothing is working

you can try

position: relative;
bottom: 20px;

but I don't see a problem on my browser (Google Chrome)

Create hyperlink to another sheet

I recorded a macro making a hiperlink. This resulted.

ActiveCell.FormulaR1C1 = "=HYPERLINK(""[Workbook.xlsx]Sheet1!A1"",""CLICK HERE"")"

Drawing rotated text on a HTML5 canvas

Like others have mentioned, you probably want to look at reusing an existing graphing solution, but rotating text isn't too difficult. The somewhat confusing bit (to me) is that you rotate the whole context and then draw on it:

ctx.rotate(Math.PI*2/(i*6));

The angle is in radians. The code is taken from this example, which I believe was made for the transformations part of the MDC canvas tutorial.

Please see the answer below for a more complete solution.

How To Set Up GUI On Amazon EC2 Ubuntu server

For LXDE/Lubuntu

1. connect to your instance (local forwarding port 5901)

ssh -L 5901:localhost:5901 -i "xxx.pem" [email protected]

2. Install packages

sudo apt update && sudo apt upgrade
sudo apt-get install xorg lxde vnc4server lubuntu-desktop

3. Create /etc/lightdm/lightdm.conf

sudo nano /etc/lightdm/lightdm.conf

4. Copy and paste the following into the lightdm.conf and save

[SeatDefaults]
allow-guest=false
user-session=LXDE
#user-session=Lubuntu

5. setup vncserver (you will be asked to create a password for the vncserver)

vncserver
sudo echo "lxpanel & /usr/bin/lxsession -s LXDE &" >> ~/.vnc/xstartup

6. Restart your instance and reconnect

sudo reboot
ssh -L 5901:localhost:5901 -i "xxx.pem" [email protected]

7. Start vncserver

vncserver -geometry 1280x800

8. In your Remote Desktop Client (e.g. Remmina) set Server to localhost:5901 and protocol to VNC

Bold words in a string of strings.xml in Android

If you want to store formatted as a string variable and reuse it to text view isn't possible

If you aren't applying formatting, you can set TextView text directly by calling setText(java.lang.CharSequence). In some cases, however, you may want to create a styled text resource that is also used as a format string. Normally, this doesn't work because the format(String, Object...) and getString(int, Object...) methods strip all the style information from the string. The work-around to this is to write the HTML tags with escaped entities, which are then recovered with fromHtml(String), after the formatting takes place.

by from docs so alternatively store the string id and everyttime bind get string from using Htlm.fromHtml().. method.

ex:

Kotlin extention

fun Context.getStringFromResource(stringId: Int): Spanned {
    return if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.N) {
        Html.fromHtml(java.lang.String.format(resources.getString(stringId)), 
 Html.FROM_HTML_MODE_COMPACT)
    } else {
        Html.fromHtml(java.lang.String.format(resources.getString(stringId)))
    }
}

In code:

getStringFromResource(id)

How can one pull the (private) data of one's own Android app?

Does that mean that one could chmod the directory from world:--x to world:r-x long enough to be able to fetch the files?

Yes, exactly. Weirdly enough, you also need the file to have the x bit set. (at least on Android 2.3)

chmod 755 all the way down worked to copy a file (but you should revert permissions afterwards, if you plan to continue using the device).

Open files always in a new tab

For those who using Windows OS:

Press Ctrl + Shift + P
Select Preferences: Open Settings (JSON) from the list
Select all and Paste this { "workbench.editor.enablePreview": false }

That's it now it will open in a new tab instead of replacing on the existing one.

For reference look at the screenshot below:

What's a good hex editor/viewer for the Mac?

I have recently started using 0xED, and like it a lot.

Detect if a jQuery UI dialog box is open

jQuery dialog has an isOpen property that can be used to check if a jQuery dialog is open or not.

You can see example at this link: http://www.codegateway.com/2012/02/detect-if-jquery-dialog-box-is-open.html

Detect and exclude outliers in Pandas data frame

This answer is similar to that provided by @tanemaki, but uses a lambda expression instead of scipy stats.

df = pd.DataFrame(np.random.randn(100, 3), columns=list('ABC'))

df[df.apply(lambda x: np.abs(x - x.mean()) / x.std() < 3).all(axis=1)]

To filter the DataFrame where only ONE column (e.g. 'B') is within three standard deviations:

df[((df.B - df.B.mean()) / df.B.std()).abs() < 3]

See here for how to apply this z-score on a rolling basis: Rolling Z-score applied to pandas dataframe

Versioning SQL Server database

We just started using Team Foundation Server. If your database is medium sized, then visual studio has some nice project integrations with built in compare, data compare, database refactoring tools, database testing framework, and even data generation tools.

But, that model doesn't fit very large or third party databases (that encrypt objects) very well. So, what we've done is to store only our customized objects. Visual Studio / Team foundation server works very well for that.

TFS Database chief arch. blog

MS TFS site

How to find which views are using a certain table in SQL Server (2008)?

If you need to find database objects (e.g. tables, columns, triggers) by name - have a look at the FREE Red-Gate tool called SQL Search which does this - it searches your entire database for any kind of string(s).

enter image description here

It's a great must-have tool for any DBA or database developer - did I already mention it's absolutely FREE to use for any kind of use??

Regex Until But Not Including

A lookahead regex syntax can help you to achieve your goal. Thus a regex for your example is

.*?quick.*?(?=z)

And it's important to notice the .*? lazy matching before the (?=z) lookahead: the expression matches a substring until a first occurrence of the z letter.

Here is C# code sample:

const string text = "The quick red fox jumped over the lazy brown dogz";

string lazy = new Regex(".*?quick.*?(?=z)").Match(text).Value;
Console.WriteLine(lazy); // The quick red fox jumped over the la

string greedy = new Regex(".*?quick.*(?=z)").Match(text).Value;
Console.WriteLine(greedy); // The quick red fox jumped over the lazy brown dog

What are the basic rules and idioms for operator overloading?

The Decision between Member and Non-member

The binary operators = (assignment), [] (array subscription), -> (member access), as well as the n-ary () (function call) operator, must always be implemented as member functions, because the syntax of the language requires them to.

Other operators can be implemented either as members or as non-members. Some of them, however, usually have to be implemented as non-member functions, because their left operand cannot be modified by you. The most prominent of these are the input and output operators << and >>, whose left operands are stream classes from the standard library which you cannot change.

For all operators where you have to choose to either implement them as a member function or a non-member function, use the following rules of thumb to decide:

If it is a unary operator, implement it as a member function.
If a binary operator treats both operands equally (it leaves them unchanged), implement this operator as a non-member function.
If a binary operator does not treat both of its operands equally (usually it will change its left operand), it might be useful to make it a member function of its left operand’s type, if it has to access the operand's private parts.

Of course, as with all rules of thumb, there are exceptions. If you have a type

enum Month {Jan, Feb, ..., Nov, Dec}

and you want to overload the increment and decrement operators for it, you cannot do this as a member functions, since in C++, enum types cannot have member functions. So you have to overload it as a free function. And operator<() for a class template nested within a class template is much easier to write and read when done as a member function inline in the class definition. But these are indeed rare exceptions.

(However, if you make an exception, do not forget the issue of const-ness for the operand that, for member functions, becomes the implicit this argument. If the operator as a non-member function would take its left-most argument as a const reference, the same operator as a member function needs to have a const at the end to make *this a const reference.)

Continue to Common operators to overload.

Remove git mapping in Visual Studio 2015

A Git repository can be removed from the Local Git Repositories list in VS-2015 when it is no longer the active project.

Your screen shot has only have one repository present, and it is active, so you can't remove it.

When you have two or more repositories, one of them will be shown in BOLD representing the active repository. Other non-active repositories can, at that time, be removed.

So, to solve your problem, if you connect with a second local repository, you will be able to remove the one you are highlighting in your screen shot.

Unfortunately, Team Explorer seems to always keep one repository active. Not sure how to convince it to let go altogether without switching to another repository.

How do I add a resources folder to my Java project in Eclipse

Build Path -> Configure Build Path -> Libraries (Tab) -> Add Class Folder, then select your folder or create one.

JAXB :Need Namespace Prefix to all the elements

To specify more than one namespace to provide prefixes, use something like:

@javax.xml.bind.annotation.XmlSchema(
    namespace = "urn:oecd:ties:cbc:v1", 
    elementFormDefault = javax.xml.bind.annotation.XmlNsForm.QUALIFIED,
    xmlns ={@XmlNs(prefix="cbc", namespaceURI="urn:oecd:ties:cbc:v1"), 
            @XmlNs(prefix="iso", namespaceURI="urn:oecd:ties:isocbctypes:v1"),
            @XmlNs(prefix="stf", namespaceURI="urn:oecd:ties:stf:v4")})

... in package-info.java

Get url without querystring

Here's an extension method using @Kolman's answer. It's marginally easier to remember to use Path() than GetLeftPart. You might want to rename Path to GetPath, at least until they add extension properties to C#.

Usage:

Uri uri = new Uri("http://www.somewhere.com?param1=foo&param2=bar");
string path = uri.Path();

The class:

using System;

namespace YourProject.Extensions
{
    public static class UriExtensions
    {
        public static string Path(this Uri uri)
        {
            if (uri == null)
            {
                throw new ArgumentNullException("uri");
            }
            return uri.GetLeftPart(UriPartial.Path);
        }
    }
}

What is the equivalent to getLastInsertId() in Cakephp?

After insertion of data, we can use following code to get recently added record's id:

    $last_insert_id=$this->Model->id;

What's the difference between MyISAM and InnoDB?

The main differences between InnoDB and MyISAM ("with respect to designing a table or database" you asked about) are support for "referential integrity" and "transactions".

If you need the database to enforce foreign key constraints, or you need the database to support transactions (i.e. changes made by two or more DML operations handled as single unit of work, with all of the changes either applied, or all the changes reverted) then you would choose the InnoDB engine, since these features are absent from the MyISAM engine.

Those are the two biggest differences. Another big difference is concurrency. With MyISAM, a DML statement will obtain an exclusive lock on the table, and while that lock is held, no other session can perform a SELECT or a DML operation on the table.

Those two specific engines you asked about (InnoDB and MyISAM) have different design goals. MySQL also has other storage engines, with their own design goals.

So, in choosing between InnoDB and MyISAM, the first step is in determining if you need the features provided by InnoDB. If not, then MyISAM is up for consideration.

A more detailed discussion of differences is rather impractical (in this forum) absent a more detailed discussion of the problem space... how the application will use the database, how many tables, size of the tables, the transaction load, volumes of select, insert, updates, concurrency requirements, replication features, etc.

The logical design of the database should be centered around data analysis and user requirements; the choice to use a relational database would come later, and even later would the choice of MySQL as a relational database management system, and then the selection of a storage engine for each table.

Facebook API error 191

For me it's the Valid OAuth Redirect URIs in Facebook Login Settings. The 191 error is gone once I updated the correct redirect URI.

Difference between database and schema

Schema in SQL Server is an object that conceptually holds definitions for other database objects such as tables,views,stored procedures etc.

regex string replace

Just change + to -:

str = str.replace(/[^a-z0-9-]/g, "");

You can read it as:

[^ ]: match NOT from the set
[^a-z0-9-]: match if not a-z, 0-9 or -
/ /g: do global match

More information:

https://developer.mozilla.org/en-US/docs/JavaScript/Guide/Regular_Expressions

Visual Studio displaying errors even if projects build

I've noticed that sometimes when switching git branches, Visual Studio (2017) will not recognize types from some files that had been added in the second branch. Deleting the .vs folder solves it, but it also trashes all your workspace settings. This trick seems to work well for me:

Solution Explorer -> Find the file with the unrecognized class in it.
Click Show All Files at the top of the Solution Explorer.
Right-click the file -> Exclude from project.
Right-click the file again -> Include in project.

This causes Intellisense to parse the file that it missed when switching branches.

OpenCV TypeError: Expected cv::UMat for argument 'src' - What is this?

The following can be used from numpy:

import numpy as np 
image = np.array(image)

How to correctly assign a new string value?

The two structs are different. When you initialize the first struct, about 40 bytes of memory are allocated. When you initialize the second struct, about 10 bytesof memory are allocated. (Actual amount is architecture dependent)

You can use the string literals (string constants) to initalize character arrays. This is why

person p = {"John", "Doe",30};

works in the first example.

You cannot assign (in the conventional sense) a string in C.

The string literals you have ("John") are loaded into memory when your code executes. When you initialize an array with one of these literals, then the string is copied into a new memory location. In your second example, you are merely copying the pointer to (location of) the string literal. Doing something like:

char* string = "Hello";
*string = 'C'

might cause compile or runtime errors (I am not sure.) It is a bad idea because you are modifying the literal string "Hello" which, for example on a microcontroler, could be located in read-only memory.

How do I compare two variables containing strings in JavaScript?

=== is not necessary. You know both values are strings so you dont need to compare types.

_x000D_

function do_check()_x000D_
{_x000D_
  var str1 = $("#textbox1").val();_x000D_
  var str2 = $("#textbox2").val();_x000D_
_x000D_
  if (str1 == str2)_x000D_
  {_x000D_
    $(":text").removeClass("incorrect");_x000D_
    alert("equal");_x000D_
  }_x000D_
  else_x000D_
  {_x000D_
    $(":text").addClass("incorrect");_x000D_
    alert("not equal");_x000D_
  }_x000D_
}

_x000D_

.incorrect_x000D_
{_x000D_
  background: #ff8888;_x000D_
}

_x000D_

<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>_x000D_
_x000D_
<input id="textbox1" type="text">_x000D_
<input id="textbox2" type="text">_x000D_
_x000D_
<button onclick="do_check()">check</button>

_x000D_

Replace all 0 values to NA

dplyr::na_if() is an option:

library(dplyr)  

df <- data_frame(col1 = c(1, 2, 3, 0),
                 col2 = c(0, 2, 3, 4),
                 col3 = c(1, 0, 3, 0),
                 col4 = c('a', 'b', 'c', 'd'))

na_if(df, 0)
# A tibble: 4 x 4
   col1  col2  col3 col4 
  <dbl> <dbl> <dbl> <chr>
1     1    NA     1 a    
2     2     2    NA b    
3     3     3     3 c    
4    NA     4    NA d

Create a shortcut on Desktop

I use "Windows Script Host Object Model" reference to create shortcut.

Adding "Windows Script Host Object Model" to project references

and to create shortcut on specific location:

    void CreateShortcut(string linkPath, string filename)
    {
        // Create shortcut dir if not exists
        if (!Directory.Exists(linkPath))
            Directory.CreateDirectory(linkPath);

        // shortcut file name
        string linkName = Path.ChangeExtension(Path.GetFileName(filename), ".lnk");

        // COM object instance/props
        IWshRuntimeLibrary.WshShell shell = new IWshRuntimeLibrary.WshShell();
        IWshRuntimeLibrary.IWshShortcut sc = (IWshRuntimeLibrary.IWshShortcut)shell.CreateShortcut(linkName);
        sc.Description = "some desc";
        //shortcut.IconLocation = @"C:\..."; 
        sc.TargetPath = linkPath;
        // save shortcut to target
        sc.Save();
    }

How to copy a file from one directory to another using PHP?

Hi guys wanted to also add on how to copy using a dynamic copying and pasting.

let say we don't know the actual folder the user will create but we know in that folder we need files to be copied to, to activate some function like delete, update, views etc.

you can use something like this... I used this code in one of the complex project which I am currently busy on. i just build it myself because all answers i got on the internet was giving me an error.

    $dirPath1 = "users/$uniqueID"; #creating main folder and where $uniqueID will be called by a database when a user login.
    $result = mkdir($dirPath1, 0755);
            $dirPath2 = "users/$uniqueID/profile"; #sub folder
            $result = mkdir($dirPath2, 0755);
                $dirPath3 = "users/$uniqueID/images"; #sub folder 
                $result = mkdir($dirPath3, 0755);
                    $dirPath4 = "users/$uniqueID/uploads";#sub folder
                    $result = mkdir($dirPath4, 0755);
                    @copy('blank/dashboard.php', 'users/'.$uniqueID.'/dashboard.php');#from blank folder to dynamic user created folder
                    @copy('blank/views.php', 'users/'.$uniqueID.'/views.php'); #from blank folder to dynamic user created folder
                    @copy('blank/upload.php', 'users/'.$uniqueID.'/upload.php'); #from blank folder to dynamic user created folder
                    @copy('blank/delete.php', 'users/'.$uniqueID.'/delete.php'); #from blank folder to dynamic user created folder

I think facebook or twitter uses something like this to build every new user dashboard dynamic....

How to get IntPtr from byte[] in C#

Marshal.Copy works but is rather slow. Faster is to copy the bytes in a for loop. Even faster is to cast the byte array to a ulong array, copy as much ulong as fits in the byte array, then copy the possible remaining 7 bytes (the trail that is not 8 bytes aligned). Fastest is to pin the byte array in a fixed statement as proposed above in Tyalis' answer.

How to do a FULL OUTER JOIN in MySQL?

Using a union query will remove duplicates, and this is different than the behavior of full outer join that never removes any duplicate:

[Table: t1]                            [Table: t2]
value                                  value
-------                                -------
1                                      1
2                                      2
4                                      2
4                                      5

This is the expected result of full outer join:

value | value
------+-------
1     | 1
2     | 2
2     | 2
Null  | 5
4     | Null
4     | Null

This is the result of using left and right Join with union:

value | value
------+-------
Null  | 5 
1     | 1
2     | 2
4     | Null

[SQL Fiddle]

My suggested query is:

select 
    t1.value, t2.value
from t1 
left outer join t2  
  on t1.value = t2.value
union all      -- Using `union all` instead of `union`
select 
    t1.value, t2.value
from t2 
left outer join t1 
  on t1.value = t2.value
where 
    t1.value IS NULL

Result of above query that is as same as expected result:

value | value
------+-------
1     | 1
2     | 2
2     | 2
4     | NULL
4     | NULL
NULL  | 5

[SQL Fiddle]

@Steve Chambers: ^{[From comments, with many thanks!]}
Note: This may be the best solution, both for efficiency and for generating the same results as a FULL OUTER JOIN. This blog post also explains it well - to quote from Method 2: "This handles duplicate rows correctly and doesn’t include anything it shouldn’t. It’s necessary to use UNION ALL instead of plain UNION, which would eliminate the duplicates I want to keep. This may be significantly more efficient on large result sets, since there’s no need to sort and remove duplicates."

I decided to add another solution that comes from full outer join visualization and math, it is not better that above but more readable:

Full outer join means (t1 ? t2): all in t1 or in t2
(t1 ? t2) = (t1 n t2) + t1_only + t2_only: all in both t1 and t2 plus all in t1 that aren't in t2 and plus all in t2 that aren't in t1:

-- (t1 n t2): all in both t1 and t2
select t1.value, t2.value
from t1 join t2 on t1.value = t2.value    
union all  -- And plus 
-- all in t1 that not exists in t2
select t1.value, null
from t1
where not exists( select 1 from t2 where t2.value = t1.value)    
union all  -- and plus
-- all in t2 that not exists in t1
select null, t2.value
from t2
where not exists( select 1 from t1 where t2.value = t1.value)

[SQL Fiddle]

To get specific part of a string in c#

Your question is vague (are you always looking for the first part?), but you can get the exact output you asked for with string.Split:

string[] substrings = a.Split(',');
b = substrings[0];
Console.WriteLine(b);

Output:

abc

Difference between fprintf, printf and sprintf?

In C, a "stream" is an abstraction; from the program's perspective it is simply a producer (input stream) or consumer (output stream) of bytes. It can correspond to a file on disk, to a pipe, to your terminal, or to some other device such as a printer or tty. The FILE type contains information about the stream. Normally, you don't mess with a FILE object's contents directly, you just pass a pointer to it to the various I/O routines.

There are three standard streams: stdin is a pointer to the standard input stream, stdout is a pointer to the standard output stream, and stderr is a pointer to the standard error output stream. In an interactive session, the three usually refer to your console, although you can redirect them to point to other files or devices:

$ myprog < inputfile.dat > output.txt 2> errors.txt

In this example, stdin now points to inputfile.dat, stdout points to output.txt, and stderr points to errors.txt.

fprintf writes formatted text to the output stream you specify.

printf is equivalent to writing fprintf(stdout, ...) and writes formatted text to wherever the standard output stream is currently pointing.

sprintf writes formatted text to an array of char, as opposed to a stream.

Cut Corners using CSS

You could use linear-gradient. Let's say the parent div had a background image, and you needed a div to sit on top of that with a gray background and a dog-eared left corner. You could do something like this:

.parent-div { background: url('/image.jpg'); }
.child-div { 
   background: #333;
   background: linear-gradient(135deg, transparent 30px, #333 0);
}

See it on CodePen

How can you create multiple cursors in Visual Studio Code

In Visual Studio without mouse: Alt+Shift+{ Arrow }.

Setting PHPMyAdmin Language

At the first site is a dropdown field to select the language of phpmyadmin.

In the config.inc.php you can set:

$cfg['Lang'] = '';

More details you can find in the documentation: http://www.phpmyadmin.net/documentation/

npm not working - "read ECONNRESET"

You may also encounter this error if you have a saved bearer token that is now invalid. I've encountered this when using a private repo where the accounts were wiped and reset, invalidating the tokens. Although your repo may not require authentication, if you have a token from a previous login it will be passed and if it's invalid your connection will be closed.

You can resolve this by either logging in again with the new user name and password, or presumably by simply logging out via npm.

How do I convert 2018-04-10T04:00:00.000Z string to DateTime?

Update: Using `DateTimeFormat`, introduced in java 8:

The idea is to define two formats: one for the input format, and one for the output format. Parse with the input formatter, then format with the output formatter.

Your input format looks quite standard, except the trailing Z. Anyway, let's deal with this: "yyyy-MM-dd'T'HH:mm:ss.SSS'Z'". The trailing 'Z' is the interesting part. Usually there's time zone data here, like -0700. So the pattern would be ...Z, i.e. without apostrophes.

The output format is way more simple: "dd-MM-yyyy". Mind the small y -s.

Here is the example code:

DateTimeFormatter inputFormatter = DateTimeFormatter.ofPattern("yyyy-MM-dd'T'HH:mm:ss.SSS'Z'", Locale.ENGLISH);
DateTimeFormatter outputFormatter = DateTimeFormatter.ofPattern("dd-MM-yyy", Locale.ENGLISH);
LocalDate date = LocalDate.parse("2018-04-10T04:00:00.000Z", inputFormatter);
String formattedDate = outputFormatter.format(date);
System.out.println(formattedDate); // prints 10-04-2018

Original answer - with old API `SimpleDateFormat`

SimpleDateFormat inputFormat = new SimpleDateFormat("yyyy-MM-dd'T'HH:mm:ss.SSS'Z'");
SimpleDateFormat outputFormat = new SimpleDateFormat("dd-MM-yyyy");
Date date = inputFormat.parse("2018-04-10T04:00:00.000Z");
String formattedDate = outputFormat.format(date);
System.out.println(formattedDate); // prints 10-04-2018

How do I loop through a list by twos?

If you have control over the structure of the list, the most pythonic thing to do would probably be to change it from:

l=[1,2,3,4]

to:

l=[(1,2),(3,4)]

Then, your loop would be:

for i,j in l:
    print i, j

updating Google play services in Emulator

I was having the same issue. Just avoid using an emulator with SDK 27. SDK 26 works fine!

How to run bootRun with spring profile via gradle task

Add to VM options: -Dspring.profiles.active=dev

Or you can add it to the build.gradle file to make it work: bootRun.systemProperties = System.properties.

What is attr_accessor in Ruby?

Simply attr-accessor creates the getter and setter methods for the specified attributes

Any way to break if statement in PHP?

$a = 1;

switch($a) {

  case "1":

    if  ($condition1){
      break;
    }

    if  ($condition2){
      break;
    }

    if  ($condition3){
      break;
    }
}

In this way I got what I want. I use a switch only has a definite case and then use break in case to choose if condition. The reason why I use the break : condition1 and condition2 may both satisfy, in that situation only condition1 is applied .IF is selective according the order.

Unused arguments in R

Change the definition of multiply to take additional unknown arguments:

multiply <- function(a, b, ...) {
  # Original code
}

Should I use Java's String.format() if performance is important?

Generally you should use String.Format because it's relatively fast and it supports globalization (assuming you're actually trying to write something that is read by the user). It also makes it easier to globalize if you're trying to translate one string versus 3 or more per statement (especially for languages that have drastically different grammatical structures).

Now if you never plan on translating anything, then either rely on Java's built in conversion of + operators into StringBuilder. Or use Java's StringBuilder explicitly.

How to add an empty column to a dataframe?

Sorry for I did not explain my answer really well at beginning. There is another way to add an new column to an existing dataframe. 1st step, make a new empty data frame (with all the columns in your data frame, plus a new or few columns you want to add) called df_temp 2nd step, combine the df_temp and your data frame.

df_temp = pd.DataFrame(columns=(df_null.columns.tolist() + ['empty']))
df = pd.concat([df_temp, df])

It might be the best solution, but it is another way to think about this question.

the reason of I am using this method is because I am get this warning all the time:

: SettingWithCopyWarning: 
A value is trying to be set on a copy of a slice from a DataFrame.
Try using .loc[row_indexer,col_indexer] = value instead

See the caveats in the documentation: https://pandas.pydata.org/pandas-docs/stable/user_guide/indexing.html#returning-a-view-versus-a-copy
  df["empty1"], df["empty2"] = [np.nan, ""]

great I found the way to disable the Warning

pd.options.mode.chained_assignment = None

jQuery dialog popup

It's quite simple, first HTML must be added:

<div id="dialog"></div>

Then, it must be initialized:

<script type="text/javascript">
  jQuery( document ).ready( function() {
    jQuery( '#dialog' ).dialog( { 'autoOpen': false } );
  });
</script>

After this you can show it by code:

jQuery( '#dialog' ).dialog( 'open' );

How to hide column of DataGridView when using custom DataSource?

You have to hide the column at the grid view control rather than at the data source. Hiding it at the data source it will not render to the grid view at all, therefore you won't be able to access the value in the grid view. Doing it the way you're suggesting, you would have to access the column value through the data source as opposed to the grid view.

To hide the column on the grid view control, you can use code like this:

dataGridView1.Columns[0].Visible = false;

To access the column from the data source, you could try something like this:

object colValue = ((DataTable)dataGridView.DataSource).Rows[dataSetIndex]["ColumnName"];

How to clear memory to prevent "out of memory error" in excel vba?

The best way to help memory to be freed is to nullify large objects:

Sub Whatever()
    Dim someLargeObject as SomeObject

    'expensive computation

    Set someLargeObject = Nothing
End Sub

Also note that global variables remain allocated from one call to another, so if you don't need persistence you should either not use global variables or nullify them when you don't need them any longer.

However this won't help if:

you need the object after the procedure (obviously)
your object does not fit in memory

Another possibility is to switch to a 64 bit version of Excel which should be able to use more RAM before crashing (32 bits versions are typically limited at around 1.3GB).

Convert Mongoose docs to json

You may also try mongoosejs's lean() :

UserModel.find().lean().exec(function (err, users) {
    return res.end(JSON.stringify(users));
}

Onclick function based on element id

you can try these:

document.getElementById("RootNode").onclick = function(){/*do something*/};

$('#RootNode').click(function(){/*do something*/});

$(document).on("click", "#RootNode", function(){/*do something*/});

There is a point for the first two method which is, it matters where in your page DOM, you should put them, the whole DOM should be loaded, to be able to find the, which is usually it gets solved if you wrap them in a window.onload or DOMReady event, like:

//in Vanilla JavaScript
window.addEventListener("load", function(){
     document.getElementById("RootNode").onclick = function(){/*do something*/};
});
//for jQuery
$(document).ready(function(){
    $('#RootNode').click(function(){/*do something*/});
});

Programs & Examples On #Pex

How to logout and redirect to login page using Laravel 5.4?

Running Tensorflow in Jupyter Notebook

Bootstrap 4 Center Vertical and Horizontal Alignment

Error: Unexpected value 'undefined' imported by the module

Install php-zip on php 5.6 on Ubuntu

How do I pass data to Angular routed components?

Node.JS: Getting error : [nodemon] Internal watch failed: watch ENOSPC

On running node server shows Following Errors and solutions:

[nodemon] Internal watch failed: watch /home/aurum304/jin ENOSPC

or

Conda update failed: SSL error: [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed

Error:Execution failed for task ':app:transformClassesWithJarMergingForDebug'

Deploying Maven project throws java.util.zip.ZipException: invalid LOC header (bad signature)

ASP.NET Web API : Correct way to return a 401/unauthorised response

Hadoop cluster setup - java.net.ConnectException: Connection refused

Laravel 5 – Remove Public from URL

No connection could be made because the target machine actively refused it 127.0.0.1

Windows cannot find 'http:/.127.0.0.1:%HTTPPORT%/apex/f?p=4950'. Make sure you typed the name correctly, and then try again

java.util.zip.ZipException: duplicate entry during packageAllDebugClassesForMultiDex

Laravel assets url

Node/Express file upload

File uploading with Express 4.0: req.files undefined

Could not load file or assembly 'Newtonsoft.Json' or one of its dependencies. Manifest definition does not match the assembly reference

Name [jdbc/mydb] is not bound in this Context

Wait until ActiveWorkbook.RefreshAll finishes - VBA

onClick not working on mobile (touch)

Cannot GET / Nodejs Error

How to center the text in PHPExcel merged cell

What is a 'NoneType' object?

"An attempt was made to access a socket in a way forbidden by its access permissions" while using SMTP

SmtpException: Unable to read data from the transport connection: net_io_connectionclosed

Runtime error: Could not load file or assembly 'System.Web.WebPages.Razor, Version=3.0.0.0

PHPExcel How to apply styles and set cell width and cell height to cell generated dynamically

laravel throwing MethodNotAllowedHttpException

Could not load file or assembly 'System.Web.Http 4.0.0 after update from 2012 to 2013

PHPExcel set border and format for all sheets in spreadsheet

HTTP Status 500 - org.apache.jasper.JasperException: java.lang.NullPointerException

error : expected unqualified-id before return in c++

Exception of type 'System.OutOfMemoryException' was thrown.

How to resume Fragment from BackStack if exists

How to get current relative directory of your Makefile?

The shell function.

Update.

PHP parse/syntax errors; and how to solve them

Unexpected '.'

Specified argument was out of the range of valid values. Parameter name: site

Set Font Color, Font Face and Font Size in PHPExcel

PHPExcel - set cell type before writing a value in it

PHPExcel auto size column width

How do I set up DNS for an apex domain (no www) pointing to a Heroku app?

Read Content from Files which are inside Zip file

Eclipse will not start and I haven't changed anything

SFTP file transfer using Java JSch

PHPExcel Make first row bold

Could not load type 'System.Runtime.CompilerServices.ExtensionAttribute' from assembly 'mscorlib

javascript set cookie with expire time

Error Microsoft.Web.Infrastructure, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35

How to export data to an excel file using PHPExcel

The module was expected to contain an assembly manifest

Generate insert script for selected records?

AppFabric installation failed because installer MSI returned with error code : 1603

How to enable cross-origin resource sharing (CORS) in the express.js framework on node.js

Could not load file or assembly 'System.Web.WebPages.Razor, Version=2.0.0.0

Operation is not valid due to the current state of the object, when I select a dropdown list

How to convert image into byte array and byte array to base64 String in android?

Error: Failed to lookup view in Express

How to send an email with Gmail as provider using Python?

Shell Script Syntax Error: Unexpected End of File

PHPExcel - creating multiple sheets by iteration

How to use phpexcel to read data and insert into database?

Path of assets in CSS files in Symfony 2

A potentially dangerous Request.Form value was detected from the client

How to pass variable from jade template file to a script file?

Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. The statement has been terminated

phpexcel to download

How to solve error message: "Failed to map the path '/'."

Merge Cell values with PHPExcel - PHP

Setting width of spreadsheet cell using PHPExcel

Set Background cell color in PHPExcel

`UIApplication.shared.statusBarFrame.height` was deprecated in iOS 13