It's possibly a 32 - 64 bits mismatch.

If you're running on a 64-bit OS, the Assembly RevitAPI may be compiled as 32-bit and your process as 64-bit or "Any CPU".

Or, the RevitAPI is compiled as 64-bit and your process is compiled as 32-bit or "Any CPU" and running on a 32-bit OS.

Using jQuery :

$(nFilter).attr("style","whatever");

Otherwise :

nFilter.setAttribute("style", "whatever");

should work

click on the notification present on bottom of the task bar if you receiving the error like port in use then select the iiss icon right click then click on exit ,it work like charm for me

If you have a QMainWindow you can override closeEvent method.

#include <QCloseEvent>
void MainWindow::closeEvent (QCloseEvent *event)
{
    QMessageBox::StandardButton resBtn = QMessageBox::question( this, APP_NAME,
                                                                tr("Are you sure?\n"),
                                                                QMessageBox::Cancel | QMessageBox::No | QMessageBox::Yes,
                                                                QMessageBox::Yes);
    if (resBtn != QMessageBox::Yes) {
        event->ignore();
    } else {
        event->accept();
    }
}

If you're subclassing a QDialog, the closeEvent will not be called and so you have to override reject():

void MyDialog::reject()
{
    QMessageBox::StandardButton resBtn = QMessageBox::Yes;
    if (changes) {
        resBtn = QMessageBox::question( this, APP_NAME,
                                        tr("Are you sure?\n"),
                                        QMessageBox::Cancel | QMessageBox::No | QMessageBox::Yes,
                                        QMessageBox::Yes);
    }
    if (resBtn == QMessageBox::Yes) {
        QDialog::reject();
    }
}

Suppose we have a generator:

def gen():
    for i in range(10):
        yield i

We can wrap the generator, along with the known length, in an object:

import itertools
class LenGen(object):
    def __init__(self,gen,length):
        self.gen=gen
        self.length=length
    def __call__(self):
        return itertools.islice(self.gen(),self.length)
    def __len__(self):
        return self.length

lgen=LenGen(gen,10)

Instances of LenGen are generators themselves, since calling them returns an iterator.

Now we can use the lgen generator in place of gen, and access len(lgen) as well:

def new_gen():
    for i in lgen():
        yield float(i)/len(lgen)

for i in new_gen():
    print(i)

Try this to read a file:

BufferedReader reader = null;

try {
    File file = new File("sample-file.dat");
    reader = new BufferedReader(new FileReader(file));

    String line;
    while ((line = reader.readLine()) != null) {
        System.out.println(line);
    }

} catch (IOException e) {
    e.printStackTrace();
} finally {
    try {
        reader.close();
    } catch (IOException e) {
        e.printStackTrace();
    }
}

In C# I did:

alert('Text\\n\\nSome more text');

It display as:

Text

Some more text

you put resource-ref in the description tag in web.xml

In 2020 I use Blob to make local copy of image, which browser will download as a file. You can test it on this site.

(function(global) {
  const next = () => document.querySelector('.search-pagination__button-text').click();
  const uuid = () => Math.random().toString(36).substring(7);
  const toBlob = (src) => new Promise((res) => {
    const img = document.createElement('img');
    const c = document.createElement("canvas");
    const ctx = c.getContext("2d");
    img.onload = ({target}) => {
      c.width = target.naturalWidth;
      c.height = target.naturalHeight;
      ctx.drawImage(target, 0, 0);
      c.toBlob((b) => res(b), "image/jpeg", 0.75);
    };
    img.crossOrigin = "";
    img.src = src;
  });
  const save = (blob, name = 'image.png') => {
    const a = document.createElement("a");
    a.href = URL.createObjectURL(blob);
    a.target = '_blank';
    a.download = name;
    a.click();
  };
  global.download = () => document.querySelectorAll('.search-content__gallery-results figure > img[src]').forEach(async ({src}) => save(await toBlob(src), `${uuid()}.png`));
  global.next = () => next();
})(window);

Didn't see anyone offer my usual go-to for this:

less +F <file>
ctrl + c
/<search term>
<enter>
shift + f

I prefer this, because you can use ctrl + c to stop and navigate through the file whenever, and then just hit shift + f to return to the live, streaming search.

You didn't close your ; after position: absolute. Otherwise your above code would have worked perfectly!

#footer {
   position:absolute;
   bottom:30px;
   width:100%;
}

How does your .NET Webservice look like?

I had the same effect using ksoap 2.3 from code.google.com. I followed the tutorial on The Code Project (which is great BTW.)

And everytime I used

    Integer result = (Integer)envelope.getResponse();

to get the result of a my webservice (regardless of the type, I tried Object, String, int) I ran into the org.ksoap2.serialization.SoapPrimitive exception.

I found a solution (workaround). The first thing I had to do was to remove the "SoapRpcMethod() attribute from my webservice methods.

    [SoapRpcMethod(), WebMethod]
    public Object GetInteger1(int i)
    {
        // android device will throw exception
        return 0;
    }

    [WebMethod]
    public Object GetInteger2(int i)
    {
        // android device will get the value
        return 0;
    }

Then I changed my Android code to:

    SoapPrimitive result = (SoapPrimitive)envelope.getResponse();

However, I get a SoapPrimitive object, which has a "value" filed that is private. Luckily the value is passed through the toString() method, so I use Integer.parseInt(result.toString()) to get my value, which is enough for me, because I don't have any complex types that I need to get from my Web service.

Here is the full source:

private static final String SOAP_ACTION = "http://tempuri.org/GetInteger2";
private static final String METHOD_NAME = "GetInteger2";
private static final String NAMESPACE = "http://tempuri.org/";
private static final String URL = "http://10.0.2.2:4711/Service1.asmx";

public int GetInteger2() throws IOException, XmlPullParserException {
    SoapObject request = new SoapObject(NAMESPACE, METHOD_NAME);

    PropertyInfo pi = new PropertyInfo();
    pi.setName("i");
    pi.setValue(123);
    request.addProperty(pi);

    SoapSerializationEnvelope envelope =
        new SoapSerializationEnvelope(SoapEnvelope.VER11);
    envelope.dotNet = true;
    envelope.setOutputSoapObject(request);

    AndroidHttpTransport androidHttpTransport = new AndroidHttpTransport(URL);
    androidHttpTransport.call(SOAP_ACTION, envelope);

    SoapPrimitive result = (SoapPrimitive)envelope.getResponse();
    return Integer.parseInt(result.toString());
}

I want to share my experience on this issue!

Suppose you have a class A and class B.

class A {
    protected $userB;

    public function __construct() {
        $this->userB = new B();
    }
}

class B {
    protected $userA;

    public function __construct() {
        $this->userA = new A();
    }
}

this will initiate a chain formation of objects which may be create this kind of issue!

1.you can run following command.

EXEC xp_cmdshell 'reg query "HKLM\Software\Microsoft\Microsoft SQL Server\Instance Names\SQL"';
GO

you can read instance name using Registry. Ingore null values.

2.using inbuilt standard Report.

select instance--> right click->Reports-->Standard Reports-->server Dashbords

one more point here for hotspot 32-bit JVM:- the native heap capacity = 4 Gig – Java Heap - PermGen;

It can get especially tricky for 32-bit JVM since the Java Heap and native Heap are in a race. The bigger your Java Heap, the smaller the native Heap. Attempting to setup a large Heap for a 32-bit VM e.g .2.5 GB+ increases risk of native OutOfMemoryError depending of your application(s) footprint, number of Threads etc.

I Got a better option,

First separate the printable and nonprintable section by class name or id

window.onafterprint = onAfterPrint;_x000D_
_x000D_
function print(){_x000D_
  //hide the nonPrintable div  _x000D_
}_x000D_
_x000D_
function onAfterPrint(){_x000D_
  // Visible the nonPrintable div_x000D_
}

<input type="button" onclick="print()" value="Print"/>

That's all

String message = "This is testing."
Intent shareText = new Intent(Intent.ACTION_SEND);
shareText .setType("text/plain");
shareText .putExtra(Intent.EXTRA_TEXT, message);

startActivity(Intent.createChooser(shareText , "Title of the dialog the system will open"));

You can use "ELSE IF" using conditional operator in expression language as below:

 <p:outputLabel value="#{transaction.status.equals('PNDNG')?'Pending':
                                     transaction.status.equals('RJCTD')?'Rejected':
                                     transaction.status.equals('CNFRMD')?'Confirmed':
                                     transaction.status.equals('PSTD')?'Posted':''}"/>

Regex regex = new Regex(@"\W+");
string outputString = regex.Replace(inputString, " ");

In my case, I needed to turn off Avast antivirus for a build time. Antivirus was blocking build when it tried to process this file:

platforms\android\app\build\intermediates\runtime_symbol_list\debug\R.txt

If you are getting message "Your Android SDK is out of date…" — click "Configure" —> "Project Defaults" —> "Project Structure", pick "SDKs" —> "Android SDK" and in a "Build Target" choose "Android 4.2.2". Click "OK". Now it should work fine.

Very simple, no library required:

var date = new Date();
var firstDay = new Date(date.getFullYear(), date.getMonth(), 1);
var lastDay = new Date(date.getFullYear(), date.getMonth() + 1, 0);

or you might prefer:

var date = new Date(), y = date.getFullYear(), m = date.getMonth();
var firstDay = new Date(y, m, 1);
var lastDay = new Date(y, m + 1, 0);

EDIT

Some browsers will treat two digit years as being in the 20th century, so that:

new Date(14, 0, 1);

gives 1 January, 1914. To avoid that, create a Date then set its values using setFullYear:

var date = new Date();
date.setFullYear(14, 0, 1); // 1 January, 14

There's also concat, but it doesn't get used much

select concat('a','b') from dual;

Python suggests users use len() instead of __len__() for consistency, just like other guys said. However, There're some other benefits:

For some built-in types like list, str, bytearray and so on, the Cython implementation of len() takes a shortcut. It directly returns the ob_size in a C structure, which is faster than calling __len__().

If you are interested in such details, you could read the book called "Fluent Python" by Luciano Ramalho. There're many interesting details in it, and may help you understand Python more deeply.

You might need to change the line

@RequestMapping(value = "/add", method = RequestMethod.GET)

to

@RequestMapping(value = "/add", method = {RequestMethod.GET,RequestMethod.POST})

For others, if clearfix does not solve this for you, add margins to the non-floated sibling that is/are the same as the width(s) of the floated sibling(s).

With option context, this is possible without permanently setting use_inf_as_na. For example:

with pd.option_context('mode.use_inf_as_na', True):
    df = df.dropna(subset=['col1', 'col2'], how='all')

Of course it can be set to treat inf as NaN permanently with

pd.set_option('use_inf_as_na', True)

For older versions, replace use_inf_as_na with use_inf_as_null.

We want code that is robust and simple. This solution works on old devices and newer devices.

    if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.JELLY_BEAN) {
        getActivity().finishAffinity();
    } else{
        getActivity().finish();
        System.exit( 0 );
    }

Java LINQ to SQL implementation. Provides full language integration and larger feature set compared to .NET LINQ.

In addition mysql passwords when not using the IDENTIFIED BY clause, may be blank values, if non-blank, they may be encrypted. But yes USAGE is used to modify an account by granting simple resource limiters such as MAX_QUERIES_PER_HOUR, again this can be specified by also using the WITH clause, in conjuction with GRANT USAGE(no privileges added) or GRANT ALL, you can also specify GRANT USAGE at the global level, database level, table level,etc....

Well, you can use Expression.AndAlso / OrElse etc to combine logical expressions, but the problem is the parameters; are you working with the same ParameterExpression in expr1 and expr2? If so, it is easier:

var body = Expression.AndAlso(expr1.Body, expr2.Body);
var lambda = Expression.Lambda<Func<T,bool>>(body, expr1.Parameters[0]);

This also works well to negate a single operation:

static Expression<Func<T, bool>> Not<T>(
    this Expression<Func<T, bool>> expr)
{
    return Expression.Lambda<Func<T, bool>>(
        Expression.Not(expr.Body), expr.Parameters[0]);
}

Otherwise, depending on the LINQ provider, you might be able to combine them with Invoke:

// OrElse is very similar...
static Expression<Func<T, bool>> AndAlso<T>(
    this Expression<Func<T, bool>> left,
    Expression<Func<T, bool>> right)
{
    var param = Expression.Parameter(typeof(T), "x");
    var body = Expression.AndAlso(
            Expression.Invoke(left, param),
            Expression.Invoke(right, param)
        );
    var lambda = Expression.Lambda<Func<T, bool>>(body, param);
    return lambda;
}

Somewhere, I have got some code that re-writes an expression-tree replacing nodes to remove the need for Invoke, but it is quite lengthy (and I can't remember where I left it...)

Generalized version that picks the simplest route:

static Expression<Func<T, bool>> AndAlso<T>(
    this Expression<Func<T, bool>> expr1,
    Expression<Func<T, bool>> expr2)
{
    // need to detect whether they use the same
    // parameter instance; if not, they need fixing
    ParameterExpression param = expr1.Parameters[0];
    if (ReferenceEquals(param, expr2.Parameters[0]))
    {
        // simple version
        return Expression.Lambda<Func<T, bool>>(
            Expression.AndAlso(expr1.Body, expr2.Body), param);
    }
    // otherwise, keep expr1 "as is" and invoke expr2
    return Expression.Lambda<Func<T, bool>>(
        Expression.AndAlso(
            expr1.Body,
            Expression.Invoke(expr2, param)), param);
}

Starting from .NET 4.0, there is the ExpressionVisitor class which allows you to build expressions that are EF safe.

    public static Expression<Func<T, bool>> AndAlso<T>(
        this Expression<Func<T, bool>> expr1,
        Expression<Func<T, bool>> expr2)
    {
        var parameter = Expression.Parameter(typeof (T));

        var leftVisitor = new ReplaceExpressionVisitor(expr1.Parameters[0], parameter);
        var left = leftVisitor.Visit(expr1.Body);

        var rightVisitor = new ReplaceExpressionVisitor(expr2.Parameters[0], parameter);
        var right = rightVisitor.Visit(expr2.Body);

        return Expression.Lambda<Func<T, bool>>(
            Expression.AndAlso(left, right), parameter);
    }



    private class ReplaceExpressionVisitor
        : ExpressionVisitor
    {
        private readonly Expression _oldValue;
        private readonly Expression _newValue;

        public ReplaceExpressionVisitor(Expression oldValue, Expression newValue)
        {
            _oldValue = oldValue;
            _newValue = newValue;
        }

        public override Expression Visit(Expression node)
        {
            if (node == _oldValue)
                return _newValue;
            return base.Visit(node);
        }
    }

There is a single quote in $submitsubject or $submit_message

Why is this a problem?

The single quote char terminates the string in MySQL and everything past that is treated as a sql command. You REALLY don't want to write your sql like that. At best, your application will break intermittently (as you're observing) and at worst, you have just introduced a huge security vulnerability.

Imagine if someone submitted '); DROP TABLE private_messages; in submit message.

Your SQL Command would be:

INSERT INTO private_messages (to_id, from_id, time_sent, subject, message) 
        VALUES('sender_id', 'id', now(),'subjet','');

DROP TABLE private_messages;

Instead you need to properly sanitize your values.

AT A MINIMUM you must run each value through mysql_real_escape_string() but you should really be using prepared statements.

If you were using mysql_real_escape_string() your code would look like this:

if($_POST['submit_message']){

if($_POST['form_subject']==""){
    $submit_subject="(no subject)";
}else{
    $submit_subject=mysql_real_escape_string($_POST['form_subject']); 
}
$submit_message=mysql_real_escape_string($_POST['form_message']);
$sender_id = mysql_real_escape_string($_POST['sender_id']);

Here is a great article on prepared statements and PDO.

Following the greenhoorn's answer, you can use "Extensions" like this:

  public static class HttpClientExtensions
    {
        public static HttpClient AddTokenToHeader(this HttpClient cl, string token)
        {
            //int timeoutSec = 90;
            //cl.Timeout = new TimeSpan(0, 0, timeoutSec);
            string contentType = "application/json";
            cl.DefaultRequestHeaders.Accept.Add(new MediaTypeWithQualityHeaderValue(contentType));
            cl.DefaultRequestHeaders.Add("Authorization", String.Format("Bearer {0}", token));
            var userAgent = "d-fens HttpClient";
            cl.DefaultRequestHeaders.Add("User-Agent", userAgent);
            return cl;
        }
    }

And use:

string _tokenUpdated = "TOKEN";
HttpClient _client;
_client.AddTokenToHeader(_tokenUpdated).GetAsync("/api/values")

And if you need to extract several properties from each object, then

let newArr = _.map(arr, o => _.pick(o, ['name', 'surname', 'rate']));

Well, for one thing, non-static inner classes have an extra, hidden field that points to the instance of the outer class. So if the Entry class weren't static, then besides having access that it doesn't need, it would carry around four pointers instead of three.

As a rule, I would say, if you define a class that's basically there to act as a collection of data members, like a "struct" in C, consider making it static.

To post JSON with jQuery in JavaScript, use JSON.stringify to dump the data, and set the content type to application/json.

var value_data = [1, 2, 3, 4];

$.ajax({
    type: 'POST',
    url: '/process',
    data: JSON.stringify(value_data),
    contentType: 'application/json',
    success: function (response_data) {
        alert("success");
    }   
});

Parse it in Flask with request.get_json().

data = request.get_json()

If you actually have set a root password and you've just lost/forgotten it:

1. Stop MySQL

2. Restart it manually with the skip-grant-tables option: mysqld_safe --skip-grant-tables

3. Now, open a new terminal window and run the MySQL client: mysql -u root

4. Reset the root password manually with this MySQL command: UPDATE mysql.user SET Password=PASSWORD('password') WHERE User='root'; If you are using MySQL 5.7 (check using mysql --version in the Terminal) then the command is:

   UPDATE mysql.user SET authentication_string=PASSWORD('password')  WHERE  User='root';
   

5. Flush the privileges with this MySQL command: FLUSH PRIVILEGES;

From http://www.tech-faq.com/reset-mysql-password.shtml

(Maybe this isn't what you need, Abs, but I figure it could be useful for people stumbling across this question in the future)

This loops vertically but might work for you.

int rtn = 0;    
foreach(int[] L in lists){
    for(int i = 0; i<L.Length;i++){
          rtn = L[i];
      //Do something with rtn
    }
}

I had a similar issue and could not "compromise" with background images. I came up with this.

<div class="container">
    <img src="http://lorempixel.com/800x600/nature">
</div>

.container {
    position: relative;
    width: 25%; /* whatever width you want. I was implementing this in a 4 tile grid pattern. I used javascript to set height equal to width */
    border: 2px solid #fff; /* just to separate the images */
    overflow: hidden; /* "crop" the image */
    background: #000; /* incase the image is wider than tall/taller than wide */
}

.container img {
    position: absolute;
    display: block;
    height: 100%; /* all images at least fill the height */
    top: 50%; /* top, left, transform trick to vertically and horizontally center image */
    left: 50%;
    transform: translate3d(-50%,-50%,0);
}

//assuming you're using jQuery
var h = $('.container').outerWidth();
$('.container').css({height: h + 'px'});

Hope this helps!

Example: https://jsfiddle.net/cfbuwxmr/1/

I used google colab to run my models and everything was perfect untill i used inline tesorboard. With tensorboard inline, I had the same issue of "Module 'tensorflow' has no attribute 'contrib'".

It was able to run training when rebuild and reinstall the model using setup.py(research folder) after initialising tensorboard.

Have you heard of "SQuirreL SQL Client"?

http://squirrel-sql.sourceforge.net/

There are at least two ways to code a solution in software... Thanks for posting answers. Just wanted to update this with another version. A TabPage array is used to shadow the Tab Control. During the Load event, the TabPages in the TabControl are copied to the shadow array. Later, this shadow array is used as the source to copy the TabPages into the TabControl...and in the desired presentation order.

    Private tabControl1tabPageShadow() As TabPage = Nothing

    Private Sub Form2_DailyReportPackageViewer_Load(sender As Object, e As EventArgs) Handles Me.Load
        LoadTabPageShadow()
    End Sub


    Private Sub LoadTabPageShadow()
        ReDim tabControl1tabPageShadow(TabControl1.TabPages.Count - 1)
        For Each tabPage In TabControl1.TabPages
            tabControl1tabPageShadow(tabPage.TabIndex) = tabPage
        Next
    End Sub

    Private Sub ViewAllReports(sender As Object, e As EventArgs) Handles Button8.Click
        TabControl1.TabPages.Clear()
        For Each tabPage In tabControl1tabPageShadow
            TabControl1.TabPages.Add(tabPage)
        Next
    End Sub


    Private Sub ViewOperationsReports(sender As Object, e As EventArgs) Handles Button10.Click
        TabControl1.TabPages.Clear()

        For tabCount As Integer = 0 To 9
            For Each tabPage In tabControl1tabPageShadow
                Select Case tabPage.Text
                    Case "Overview"
                        If tabCount = 0 Then TabControl1.TabPages.Add(tabPage)
                    Case "Production Days Under 110%"
                        If tabCount = 1 Then TabControl1.TabPages.Add(tabPage)
                    Case "Screening Status"
                        If tabCount = 2 Then TabControl1.TabPages.Add(tabPage)
                    Case "Rework Status"
                        If tabCount = 3 Then TabControl1.TabPages.Add(tabPage)
                    Case "Secondary by Machine"
                        If tabCount = 4 Then TabControl1.TabPages.Add(tabPage)
                    Case "Secondary Set Ups"
                        If tabCount = 5 Then TabControl1.TabPages.Add(tabPage)
                    Case "Secondary Run Times"
                        If tabCount = 6 Then TabControl1.TabPages.Add(tabPage)
                    Case "Primary Set Ups"
                        If tabCount = 7 Then TabControl1.TabPages.Add(tabPage)
                    Case "Variance"
                        If tabCount = 8 Then TabControl1.TabPages.Add(tabPage)
                    Case "Schedule Changes"
                        If tabCount = 9 Then TabControl1.TabPages.Add(tabPage)
                End Select
            Next
        Next

• First convert string to java.util.Date using date formatter
• Use getTime() to obtain count of millisecs from date

ping -n 11 -w 1000 127.0.0.1 > nul

Update

Beginner's mistake. Ping doesn't wait 1000 ms before or after an request, but inbetween requests. So to wait 10 seconds, you'll have to do 11 pings to have 10 'gaps' of a second inbetween.

Vin's answer worked great for me. Here is the same solution for C# developers using Xamarin.iOS/MonoTouch:

var navigationBar = NavigationController.NavigationBar; //or another reference
navigationBar.BarTintColor = UIColor.Blue;
navigationBar.TintColor = UIColor.White;
navigationBar.SetTitleTextAttributes(new UITextAttributes() { TextColor = UIColor.White });
navigationBar.Translucent = false;

   (function($) {
    $.fn.getCursorPosition = function() {
        var input = this.get(0);
        if (!input) return; // No (input) element found
        if (document.selection) {
            // IE
           input.focus();
        }
        return 'selectionStart' in input ? input.selectionStart:'' || Math.abs(document.selection.createRange().moveStart('character', -input.value.length));
     }
   })(jQuery);

For PyCharm 2017

We can follow below: File >> Settings >> Editor >> Code Style.

Then provide values for Hard Wrap & Visual Guides for wrapping while typing, tick the checkbox.

NB: look at other tabs as well, viz. Python, HTML, JSON etc.

Java doesn't have delegates and is proud of it :). From what I read here I found in essence 2 ways to fake delegates: 1. reflection; 2. inner class

Reflections are slooooow! Inner class does not cover the simplest use-case: sort function. Do not want to go into details, but the solution with inner class basically is to create a wrapper class for an array of integers to be sorted in ascending order and an class for an array of integers to be sorted in descending order.

The following

find * -maxdepth 0 -type d

basically filters the expansion of '*', i.e. all entries in the current dir, by the -type d condition.

Advantage is that, output is same as ls -1 *, but only with directories and entries do not start with a dot

$this->where('email', $email)->where('password', $password) 

is returning a Builder object which you could use to append more where filters etc.

To get the result you need:

$userRecord = $this->where('email', $email)->where('password', $password)->first();

The issue HttpServletRequest.login does not set authentication state in session has been fixed in 3.0.1. Update glassfish to the latest version and you're done.

Updating is quite straightforward:

glassfishv3/bin/pkg set-authority -P dev.glassfish.org
glassfishv3/bin/pkg image-update

Even I also say the below one is better :)

while(true)
{

}

The best way is to declare the variable as a Single or a Double depending on the precision you need. The data type Single utilizes 4 Bytes and has the range of -3.402823E38 to 1.401298E45. Double uses 8 Bytes.

You can declare as follows:

Dim decAsdf as Single

or

Dim decAsdf as Double

Here is an example which displays a message box with the value of the variable after calculation. All you have to do is put it in a module and run it.

Sub doubleDataTypeExample()
Dim doubleTest As Double


doubleTest = 0.0000045 * 0.005 * 0.01

MsgBox "doubleTest = " & doubleTest
End Sub

I found one solution for assign variables to COLUMN or TABLE:

conn = sqlite3.connect('database.db')
cursor=conn.cursor()
z="Cash_payers"   # bring results from Table 1 , Column: Customers and COLUMN 
# which are pays cash
sorgu_y= Customers #Column name
query1="SELECT  * FROM  Table_1 WHERE " +sorgu_y+ " LIKE ? "
print (query1)
query=(query1)
cursor.execute(query,(z,))

Don't forget input one space between the WHERE and double quotes and between the double quotes and LIKE

Use vscode-solution-explorer extension:

This extension adds a Visual Studio Solution File explorer panel in Visual Studio Code. Now you can navigate into your solution following the original Visual Studio structure.

https://github.com/fernandoescolar/vscode-solution-explorer

Thanks @fernandoescolar

Here's one idea: you could have a server hosted by your company that all instances of your software need to connect to. Simply having them connect and verify a registration key is not sufficient -- they'll just remove the check. In addition to the key check, you need to also have the server perform some vital task that the client can't perform itself, so it's impossible to remove. This of course would probably mean a lot of heavy processing on the part of your server, but it would make your software difficult to steal, and assuming you have a good key scheme (check ownership, etc), the keys will also be difficult to steal. This is probably more invasive than you want, since it will require your users to be connected to the internet to use your software.

Using Kotlin, you can do the following to read a file from assets in Android:

try {
    val inputStream:InputStream = assets.open("helloworld.txt")
    val inputString = inputStream.bufferedReader().use{it.readText()}
    Log.d(TAG,inputString)
} catch (e:Exception){
    Log.d(TAG, e.toString())
}

I'll use Java as an example. Let's say we have a class that looks like this:

public class ABC
{
   public void doDiskAccess() {...}
}

When I call the class, I'll need to do something like this:

ABC abc = new ABC();

abc. doDiskAccess();

So far, so good. Now let's say I have another class that looks like this:

public class XYZ
{
   public void doNetworkAccess() {...}
}

It looks exactly the same as ABC, but let's say it works over the network instead of on disk. So now let's write a program like this:

if(config.isNetwork()) new XYZ().doNetworkAccess();
else new ABC().doDiskAccess();

That works, but it's a bit unwieldy. I could simplify this with an interface like this:

public interface Runnable
{
    public void run();
}

public class ABC implements Runnable
{
   public void run() {...}
}

public class XYZ implements Runnable
{
   public void run() {...}
}

Now my code can look like this:

Runnable obj = config.isNetwork() ? new XYZ() : new ABC();

obj.run();

See how much cleaner and simpler to understand that is? We've just understood the first basic tenet of loose coupling: abstraction. The key from here is to ensure that ABC and XYZ do not depend on any methods or variables of the classes that call them. That allows ABC and XYZ to be completely independent APIs. Or in other words, they are "decoupled" or "loosely coupled" from the parent classes.

But what if we need communication between the two? Well, then we can use further abstractions like an Event Model to ensure that the parent code never needs to couple with the APIs you have created.

try this,

@Override
public void onCreateOptionsMenu(Menu menu, MenuInflater inflater) {
    inflater.inflate(R.menu.menu_sample, menu);
    super.onCreateOptionsMenu(menu,inflater);
}

Finally, in onCreateView method, add this line to make the options appear in your Toolbar

setHasOptionsMenu(true);

This is an old question but here's my input

function getColumns($dbhandle, $tableName) {
    $columnsquery = $dbhandle->query("PRAGMA table_info($tableName)");
    $columns = array();
    foreach ($columnsquery as $k) {
        $columns[] = $k['name'];
    }
    return $columns;
}

just put your variable for your pdo object and the tablename. Works for me

 .centerImge {
        display: block;
        margin-left: auto;
        margin-right: auto;
        width: 50%;
        height:50%;
    }
 <div>
 @foreach (var item in Model)
{
<span> <img src="@item.Thumbnail"  class="centerImge" /></span>
  <h3 style="text-align:center">  @item.CategoryName</h3>
}
 </div>

This worked for me on Chrome + FF:

"foo=bar=beer".split(/^[^=]+=/)[1] // "bar=beer"
"foo==".split(/^[^=]+=/)[1] // "="
"foo=".split(/^[^=]+=/)[1] // ""
"foo".split(/^[^=]+=/)[1] // undefined

If you also need the key try this:

"foo=bar=beer".split(/^([^=]+)=/) // Array [ "", "foo", "bar=beer" ]
"foo==".split(/^([^=]+)=/) // [ "", "foo", "=" ]
"foo=".split(/^([^=]+)=/) // [ "", "foo", "" ]
"foo".split(/^([^=]+)=/) // [ "foo" ]

//[0] = ignored (holds the string when there's no =, empty otherwise)
//[1] = hold the key (if any)
//[2] = hold the value (if any)

One way to do this is by stashing you local changes and pulling from the remote repo. In this way, you will not lose your local files as the files will go to the stash.

git add -A
git stash
git pull

You can check your local stashed files using this command - git stash list

You're asking the wrong question here - instead of forcing everything into a vector ask how you can convert test to work with iterators instead of a specific container. You can provide an overload too in order to retain compatibility (and handle other containers at the same time for free):

void test(const std::vector<int>& in) {
  // Iterate over vector and do whatever
}

becomes:

template <typename Iterator>
void test(Iterator begin, const Iterator end) {
    // Iterate over range and do whatever
}

template <typename Container>
void test(const Container& in) {
    test(std::begin(in), std::end(in));
}

Which lets you do:

int x[3]={1, 2, 3};
test(x); // Now correct

(Ideone demo)

Bash is a Command Line Interface that was created over twenty-seven years ago by Brian Fox as a free software replacement for the Bourne Shell. A shell is a specific kind of Command Line Interface. Bash is "open source" which means that anyone can read the code and suggest changes. Since its beginning, it has been supported by a large community of engineers who have worked to make it an incredible tool. Bash is the default shell for Linux and Mac. For these reasons, Bash is the most used and widely distributed shell.

Windows has a different Command Line Interface, called Command Prompt. While this has many of the same features as Bash, Bash is much more popular. Because of the strength of the open source community and the tools they provide, mastering Bash is a better investment than mastering Command Prompt.

To use Bash on a Windows computer, we need to download and install a program called Git Bash. Git Bash (Is the Bash for windows) allows us to easily access Bash as well as another tool called Git, inside the Windows environment.

Half (but only half) snarky answer (the other half is bitter disdain of the reality of bureaucracy):

Use vh

Everything is always sized to browser window.

Always allow scroll down, but disable horizontal scroll.

Set body width to be a static 50vh, and never code css that floats or breaks out of the parent div. (If they try to mock up something that looks like it does, clever use of a background gif can throw them off track.) And style only using tables so everything is held rigidly into place as expected. Include a javascript function to undo any ctrl+/- activity the user may do.

Users will hate you, because the site doesn't flow differently based on what they're using (such as text being too small to read on phones). Your coworkers will hate you because nobody in their right mind does this and it will likely break their work (though not yours). Your programming professors will hate you because this is not a good idea. Your UX designer will hate you because it will reveal the corners they cut in designing UX mock-ups that they have to do in order to meet deadlines.

Nearly everyone will hate you, except the people who tell you to make things match the mock-up and to do so quickly. Those people, however (which generally include the project managers), will be ecstatic by your accuracy and fast turn around time. And everyone knows their opinion is the only one that matters to your paycheck.

A pattern for parsing that avoids out parameters:

public static bool TryParseInt32(this string input, Action<int> action)
{
    int result;
    if (Int32.TryParse(input, out result))
    {
        action(result);
        return true;
    }
    return false;
}

Usage:

if (!textBox.Text.TryParseInt32(number => label.Text = SomeMathFunction(number)))
    label.Text = "Please enter a valid integer";

This can be put this in the codeplex project, if so desired

object MyObject = null;

if (MyObject != null && !string.IsNullOrEmpty(MyObject.ToString())) { ... }

Here's the calling order:

1. app.config()
2. app.run()
3. directive's compile functions (if they are found in the dom)
4. app.controller()
5. directive's link functions (again, if found)

Here's a simple demo where you can watch each one executing (and experiment if you'd like).

From Angular's module docs:

Run blocks - get executed after the injector is created and are used to kickstart the application. Only instances and constants can be injected into run blocks. This is to prevent further system configuration during application run time.

Run blocks are the closest thing in Angular to the main method. A run block is the code which needs to run to kickstart the application. It is executed after all of the services have been configured and the injector has been created. Run blocks typically contain code which is hard to unit-test, and for this reason should be declared in isolated modules, so that they can be ignored in the unit-tests.

One situation where run blocks are used is during authentications.

You could only convert a JSON array into a CSV file.

Lets say, you have a JSON like the following :

{"infile": [{"field1": 11,"field2": 12,"field3": 13},
            {"field1": 21,"field2": 22,"field3": 23},
            {"field1": 31,"field2": 32,"field3": 33}]}

Lets see the code for converting it to csv :

import java.io.File;
import java.io.IOException;

import org.apache.commons.io.FileUtils;
import org.json.CDL;
import org.json.JSONArray;
import org.json.JSONException;
import org.json.JSONObject;

public class JSON2CSV {
    public static void main(String myHelpers[]){
        String jsonString = "{\"infile\": [{\"field1\": 11,\"field2\": 12,\"field3\": 13},{\"field1\": 21,\"field2\": 22,\"field3\": 23},{\"field1\": 31,\"field2\": 32,\"field3\": 33}]}";

        JSONObject output;
        try {
            output = new JSONObject(jsonString);


            JSONArray docs = output.getJSONArray("infile");

            File file=new File("/tmp2/fromJSON.csv");
            String csv = CDL.toString(docs);
            FileUtils.writeStringToFile(file, csv);
        } catch (JSONException e) {
            e.printStackTrace();
        } catch (IOException e) {
            // TODO Auto-generated catch block
            e.printStackTrace();
        }        
    }

}

Now you got the CSV generated from JSON.

It should look like this:

field1,field2,field3
11,22,33
21,22,23
31,32,33

The maven dependency was like,

<dependency>
    <groupId>org.json</groupId>
    <artifactId>json</artifactId>
    <version>20090211</version>
</dependency>

Update Dec 13, 2019:

Updating the answer, since now we can support complex JSON Arrays as well.

import java.nio.file.Files;
import java.nio.file.Paths;

import com.github.opendevl.JFlat;

public class FlattenJson {

    public static void main(String[] args) throws Exception {
        String str = new String(Files.readAllBytes(Paths.get("path_to_imput.json")));

        JFlat flatMe = new JFlat(str);

        //get the 2D representation of JSON document
        flatMe.json2Sheet().headerSeparator("_").getJsonAsSheet();

        //write the 2D representation in csv format
        flatMe.write2csv("path_to_output.csv");
    }

}

dependency and docs details are in link

condition binding must have optinal type which mean that you can only bind optional values in if let statement

func tableView(_ tableView: UITableView, commit editingStyle: UITableViewCellEditingStyle, forRowAt indexPath: IndexPath) {

    if editingStyle == .delete {

        // Delete the row from the data source

        if let tv = tableView as UITableView? {


        }
    }
}

This will work fine but make sure when you use if let it must have optinal type "?"

If you got factor then you could change levels by standard method:

df <- data.frame(name = c('cow','pig','eagle','pigeon'), 
             stringsAsFactors = FALSE)
df$type <- factor(df$name) # First step: copy vector and make it factor
# Change levels:
levels(df$type) <- list(
    animal = c("cow", "pig"),
    bird = c("eagle", "pigeon")
)
df
#     name   type
# 1    cow animal
# 2    pig animal
# 3  eagle   bird
# 4 pigeon   bird

You could write simple function as a wrapper:

changelevels <- function(f, ...) {
    f <- as.factor(f)
    levels(f) <- list(...)
    f
}

df <- data.frame(name = c('cow','pig','eagle','pigeon'), 
                 stringsAsFactors = TRUE)

df$type <- changelevels(df$name, animal=c("cow", "pig"), bird=c("eagle", "pigeon"))

On Python 3.6 I think is much simpler as ipaddress module is already included:

import ipaddress

    def is_ipv4(string):
        try:
            ipaddress.IPv4Network(string)
            return True
        except ValueError:
            return False

You are testing if the values of the variables error and Already are present in RepoOutput[RepoName.index(repo)]. If these variables don't exist then an undefined object is used.

Both of your if and elif tests therefore are false; there is no undefined object in the value of RepoOutput[RepoName.index(repo)].

I think you wanted to test if certain strings are in the value instead:

{% if "error" in RepoOutput[RepoName.index(repo)] %}
    <td id="error"> {{ RepoOutput[RepoName.index(repo)] }} </td>
{% elif "Already" in RepoOutput[RepoName.index(repo) %}
    <td id="good"> {{ RepoOutput[RepoName.index(repo)] }} </td>
{% else %}
    <td id="error"> {{ RepoOutput[RepoName.index(repo)] }} </td>
{% endif %}
</tr>

Other corrections I made:

• Used {% elif ... %} instead of {$ elif ... %}.
• moved the </tr> tag out of the if conditional structure, it needs to be there always.
• put quotes around the id attribute

Note that most likely you want to use a class attribute instead here, not an id, the latter must have a value that must be unique across your HTML document.

Personally, I'd set the class value here and reduce the duplication a little:

{% if "Already" in RepoOutput[RepoName.index(repo)] %}
    {% set row_class = "good" %}
{% else %}
    {% set row_class = "error" %}
{% endif %}
<td class="{{ row_class }}"> {{ RepoOutput[RepoName.index(repo)] }} </td>

you can just do $scope.todo = Todo.get({ id: 123 }). .get() and .query() on a Resource return an object immediately and fill it with the result of the promise later (to update your template). It's not a typical promise which is why you need to either use a callback or the $promise property if you have some special code you want executed after the call. But there is no need to assign it to your scope in a callback if you are only using it in the template.

So you want to take latitude/longitude coordinates and find out the pixel coordinates on your image of that location?

The main GMap2 class provides transformation to/from a pixel on the displayed map and a lat/long coordinate:

Gmap2.fromLatLngToContainerPixel(latlng)

For example:

var gmap2 = new GMap2(document.getElementById("map_canvas"));
var geocoder = new GClientGeocoder();

geocoder.getLatLng( "1600 Pennsylvania Avenue NW Washington, D.C. 20500",
    function( latlng ) {
        var pixel_coords = gmap2.fromLatLngToContainerPixel(latlng);

        window.alert( "The White House is at pixel coordinates (" + 
            pixel_coodrs.x + ", " + pixel_coords.y + ") on the " +
            "map image shown on this page." );
    }
);

So assuming that your map image is a screen grab of the Google Map display, then this will give you the correct pixel coordinate on that image of a lat/long coordinate.

Things are trickier if you're grabbing tile images and stitching them together yourself since the area of the complete tile set will lie outside the area of the displayed map.

In this case, you'll need to use the left and top values of the top-left image tile as an offset from the coordinates that fromLatLngToContainerPixel(latlng:GLatLng) gives you, subtracting the left coordinate from the x coordinate and top from the y coordinate. So if the top-left image is positioned at (-50, -122) (left, top), and fromLatLngToContainerPixel() tells you a lat/long is at pixel coordinate (150, 320), then on the image stitched together from tiles, the true position of the coordinate is at (150 - (-50), 320 - (-122)) which is (200, 442).

It's also possible that a similar GMap2 coordinate translation function:

GMap2.fromLatLngToDivPixel(latlng:GLatLng)

will give you the correct lat/long to pixel translation for the stitched-tiles case - I've not tested this, nor is it 100% clear from the API docs.

See here for more: http://code.google.com/apis/maps/documentation/reference.html#GMap2.Methods.Coordinate-Transformations

As written in comments, this method is wrong.

I didn't find this answer before, but acording to W3 Specs valid empty src tag would be an anchor link #.

Example: src="#", src="#empty"

Page validates successfully and no extra request are made.

code for a simple copy.

cp -r ./SourceFolder ./DestFolder

code for a copy with success result

cp -rv ./SourceFolder ./DestFolder

code for Forcefully if source contains any readonly file it will also copy

cp -rf ./SourceFolder ./DestFolder

for details help

cp --help

Instead of using re.search use re.findall it will return you all matches in a List. Or you could also use re.finditer (which i like most to use) it will return an Iterator Object and you can just use it to iterate over all found matches.

line = 'bla bla bla<form>Form 1</form> some text...<form>Form 2</form> more text?'
for match in re.finditer('<form>(.*?)</form>', line, re.S):
    print match.group(1)

First, I don't understand why you are adding all the keys and values count times, Index is never used.

I tried this example :

        var source = new BindingSource();
        List<MyStruct> list = new List<MyStruct> { new MyStruct("fff", "b"),  new MyStruct("c","d") };
        source.DataSource = list;
        grid.DataSource = source;

and that work pretty well, I get two columns with the correct names. MyStruct type exposes properties that the binding mechanism can use.

    class MyStruct
   {
    public string Name { get; set; }
    public string Adres { get; set; }


    public MyStruct(string name, string adress)
    {
        Name = name;
        Adres = adress;
    }
  }

Try to build a type that takes one key and value, and add it one by one. Hope this helps.

I don't think this is OP's problem, but if you're like me, you ran into this error while you were trying to play around with git plumbing commands (update-index & cat-file) without ever actually committing anything in the first place. So try committing something (git commit -am 'First commit') and your problem should be solved.

I'll add to the long list of answers here. If you are on Windows/ using Anaconda3, I accomplished this by going to the file /Scripts/ipython-script.py, and just added the lines

import os
os.chdir(<path to desired dir>)

before the line

sys.exit(IPython.start_ipython())

Try this:

onclick="myfunction(
    '/myController/myAction',
    function(){myfuncionOnOK('/myController2/myAction2','myParameter2');},
    function(){myfuncionOnCancel('/myController3/myAction3','myParameter3');}
);"

Then you just need to call these two functions passed to myfunction:

function myfunction(url, f1, f2) {
    // …
    f1();
    f2();
}

js version, catches iPad too:

var is_mobile = /mobile|android/i.test (navigator.userAgent);

RadioGroup in XML

<?xml version="1.0" encoding="utf-8"?>
<RelativeLayout xmlns:android="http://schemas.android.com/apk/res/android"
    android:layout_width="match_parent" android:layout_height="match_parent">
<RadioGroup
    android:layout_width="match_parent"
    android:layout_height="wrap_content"
    android:orientation="vertical">
    <RadioButton
        android:layout_width="wrap_content"
        android:layout_height="wrap_content"
        android:text="Java"/>

    </RadioGroup>
</RelativeLayout>

activity_main.xml

<?xml version="1.0" encoding="utf-8"?>
<RelativeLayout xmlns:android="http://schemas.android.com/apk/res/android"
    android:layout_width="match_parent" android:layout_height="match_parent">
    <TextView
        android:layout_width="wrap_content"
        android:layout_height="wrap_content"
        android:layout_marginTop="150dp"
        android:layout_marginLeft="100dp"
        android:textSize="18dp"
        android:text="Select Your Course"
        android:textStyle="bold"
        android:id="@+id/txtView"/>
<RadioGroup
    android:layout_width="match_parent"
    android:layout_height="wrap_content"
    android:orientation="vertical"
    android:id="@+id/rdGroup"
    android:layout_below="@+id/txtView">
    <RadioButton
        android:id="@+id/rdbJava"
        android:layout_width="wrap_content"
        android:layout_height="wrap_content"
        android:padding="10dp"
        android:layout_marginLeft="100dp"
        android:text="Java"
        android:onClick="onRadioButtonClicked"/>
    <RadioButton
        android:id="@+id/rdbPython"
        android:layout_width="wrap_content"
        android:layout_height="wrap_content"
        android:padding="10dp"
        android:layout_marginLeft="100dp"
        android:text="Python"
        android:onClick="onRadioButtonClicked"/>
    <RadioButton
        android:id="@+id/rdbAndroid"
        android:layout_width="wrap_content"
        android:layout_height="wrap_content"
        android:padding="10dp"
        android:layout_marginLeft="100dp"
        android:text="Android"
        android:onClick="onRadioButtonClicked"/>
    <RadioButton
        android:id="@+id/rdbAngular"
        android:layout_width="wrap_content"
        android:layout_height="wrap_content"
        android:padding="10dp"
        android:layout_marginLeft="100dp"
        android:text="AngularJS"
        android:onClick="onRadioButtonClicked"/>
</RadioGroup>
    <Button
        android:id="@+id/getBtn"
        android:layout_width="wrap_content"
        android:layout_height="wrap_content"
        android:layout_marginLeft="100dp"
        android:layout_below="@+id/rdGroup"
        android:text="Get Course" />
</RelativeLayout>

MainActivity.java

import android.support.v7.app.AppCompatActivity;
import android.os.Bundle;
import android.view.View;
import android.widget.Button;
import android.widget.RadioButton;
import android.widget.Toast;

public class MainActivity extends AppCompatActivity {
    RadioButton android, java, angular, python;
    @Override
    protected void onCreate(Bundle savedInstanceState) {
        super.onCreate(savedInstanceState);
        setContentView(R.layout.activity_main);
        android = (RadioButton)findViewById(R.id.rdbAndroid);
        angular = (RadioButton)findViewById(R.id.rdbAngular);
        java = (RadioButton)findViewById(R.id.rdbJava);
        python = (RadioButton)findViewById(R.id.rdbPython);
        Button btn = (Button)findViewById(R.id.getBtn);
        btn.setOnClickListener(new View.OnClickListener() {
            @Override
            public void onClick(View v) {
                String result = "Selected Course: ";
                result+= (android.isChecked())?"Android":(angular.isChecked())?"AngularJS":(java.isChecked())?"Java":(python.isChecked())?"Python":"";
                Toast.makeText(getApplicationContext(), result, Toast.LENGTH_SHORT).show();
            }
        });
    }
    public void onRadioButtonClicked(View view) {
        boolean checked = ((RadioButton) view).isChecked();
        String str="";
        // Check which radio button was clicked
        switch(view.getId()) {
            case R.id.rdbAndroid:
                if(checked)
                str = "Android Selected";
                break;
            case R.id.rdbAngular:
                if(checked)
                str = "AngularJS Selected";
                break;
            case R.id.rdbJava:
                if(checked)
                str = "Java Selected";
                break;
            case R.id.rdbPython:
                if(checked)
                str = "Python Selected";
                break;
        }
        Toast.makeText(getApplicationContext(), str, Toast.LENGTH_SHORT).show();
    }
}

Just a mention with jQuery v3.2.1 and Laravel 5.6.

Case 1: The JS object posted directly, like:

$.post("url", {name:'John'}, function( data ) {
});

Corresponding Laravel PHP code should be:

parse_str($request->getContent(),$data); //JSON will be parsed to object $data

Case 2: The JSON string posted, like:

$.post("url", JSON.stringify({name:'John'}), function( data ) {
});

Corresponding Laravel PHP code should be:

$data = json_decode($request->getContent(), true);

In addition to the answer of BalusC, use the following Java RegExp to replace && with and:

Search:  (#\{[^\}]*)(&&)([^\}]*\})
Replace: $1and$3

You have run this regular expression replacement multiple times to find all occurences in case you are using >2 literals in your EL expressions. Mind to replace the leading # by $ if your EL expression syntax differs.

Solution with Plink

Save this python script to known_hosts.py:

#! /usr/bin/env python

# $Id$
# Convert OpenSSH known_hosts and known_hosts2 files to "new format" PuTTY
# host keys.
#   usage:
#     kh2reg.py [ --win ] known_hosts1 2 3 4 ... > hosts.reg
#       Creates a Windows .REG file (double-click to install).
#     kh2reg.py --unix    known_hosts1 2 3 4 ... > sshhostkeys
#       Creates data suitable for storing in ~/.putty/sshhostkeys (Unix).
# Line endings are someone else's problem as is traditional.
# Developed for Python 1.5.2.

import fileinput
import base64
import struct
import string
import re
import sys
import getopt

def winmungestr(s):
    "Duplicate of PuTTY's mungestr() in winstore.c:1.10 for Registry keys"
    candot = 0
    r = ""
    for c in s:
        if c in ' \*?%~' or ord(c)<ord(' ') or (c == '.' and not candot):
            r = r + ("%%%02X" % ord(c))
        else:
            r = r + c
        candot = 1
    return r

def strtolong(s):
    "Convert arbitrary-length big-endian binary data to a Python long"
    bytes = struct.unpack(">%luB" % len(s), s)
    return reduce ((lambda a, b: (long(a) << 8) + long(b)), bytes)

def longtohex(n):
    """Convert long int to lower-case hex.

    Ick, Python (at least in 1.5.2) doesn't appear to have a way to
    turn a long int into an unadorned hex string -- % gets upset if the
    number is too big, and raw hex() uses uppercase (sometimes), and
    adds unwanted "0x...L" around it."""

    plain=string.lower(re.match(r"0x([0-9A-Fa-f]*)l?$", hex(n), re.I).group(1))
    return "0x" + plain

output_type = 'windows'

try:
    optlist, args = getopt.getopt(sys.argv[1:], '', [ 'win', 'unix' ])
    if filter(lambda x: x[0] == '--unix', optlist):
        output_type = 'unix'
except getopt.error, e:
    sys.stderr.write(str(e) + "\n")
    sys.exit(1)

if output_type == 'windows':
    # Output REG file header.
    sys.stdout.write("""REGEDIT4

[HKEY_CURRENT_USER\Software\SimonTatham\PuTTY\SshHostKeys]
""")

# Now process all known_hosts input.
for line in fileinput.input(args):

    try:
        # Remove leading/trailing whitespace (should zap CR and LF)
        line = string.strip (line)

        # Skip blanks and comments
        if line == '' or line[0] == '#':
            raise "Skipping input line"

        # Split line on spaces.
        fields = string.split (line, ' ')

        # Common fields
        hostpat = fields[0]
        magicnumbers = []   # placeholder
        keytype = ""        # placeholder

        # Grotty heuristic to distinguish known_hosts from known_hosts2:
        # is second field entirely decimal digits?
        if re.match (r"\d*$", fields[1]):

            # Treat as SSH-1-type host key.
            # Format: hostpat bits10 exp10 mod10 comment...
            # (PuTTY doesn't store the number of bits.)
            magicnumbers = map (long, fields[2:4])
            keytype = "rsa"

        else:

            # Treat as SSH-2-type host key.
            # Format: hostpat keytype keyblob64 comment...
            sshkeytype, blob = fields[1], base64.decodestring (fields[2])

            # 'blob' consists of a number of
            #   uint32    N (big-endian)
            #   uint8[N]  field_data
            subfields = []
            while blob:
                sizefmt = ">L"
                (size,) = struct.unpack (sizefmt, blob[0:4])
                size = int(size)   # req'd for slicage
                (data,) = struct.unpack (">%lus" % size, blob[4:size+4])
                subfields.append(data)
                blob = blob [struct.calcsize(sizefmt) + size : ]

            # The first field is keytype again, and the rest we can treat as
            # an opaque list of bignums (same numbers and order as stored
            # by PuTTY). (currently embedded keytype is ignored entirely)
            magicnumbers = map (strtolong, subfields[1:])

            # Translate key type into something PuTTY can use.
            if   sshkeytype == "ssh-rsa":   keytype = "rsa2"
            elif sshkeytype == "ssh-dss":   keytype = "dss"
            else:
                raise "Unknown SSH key type", sshkeytype

        # Now print out one line per host pattern, discarding wildcards.
        for host in string.split (hostpat, ','):
            if re.search (r"[*?!]", host):
                sys.stderr.write("Skipping wildcard host pattern '%s'\n"
                                 % host)
                continue
            elif re.match (r"\|", host):
                sys.stderr.write("Skipping hashed hostname '%s'\n" % host)
                continue
            else:
                m = re.match (r"\[([^]]*)\]:(\d*)$", host)
                if m:
                    (host, port) = m.group(1,2)
                    port = int(port)
                else:
                    port = 22
                # Slightly bizarre output key format: 'type@port:hostname'
                # XXX: does PuTTY do anything useful with literal IP[v4]s?
                key = keytype + ("@%d:%s" % (port, host))
                value = string.join (map (longtohex, magicnumbers), ',')
                if output_type == 'unix':
                    # Unix format.
                    sys.stdout.write('%s %s\n' % (key, value))
                else:
                    # Windows format.
                    # XXX: worry about double quotes?
                    sys.stdout.write("\"%s\"=\"%s\"\n"
                                     % (winmungestr(key), value))

    except "Unknown SSH key type", k:
        sys.stderr.write("Unknown SSH key type '%s', skipping\n" % k)
    except "Skipping input line":
        pass

Tested on Win7x64 and Python 2.7.

Then run:

ssh-keyscan -t rsa bitbucket.org >>~/.ssh/known_hosts
python --win known_hosts.py >known_hosts.reg
start known_hosts.reg

And choose to import into the registry. The keyscan will retrieve the public key for the domain (I had my problems with bitbucket), and then the python script will convert it to Plink format.

It's still an attribute. Setting it to:

<input type="button" name=myButton value="disable" disabled="disabled">

... is valid.

Apparently YouTube constantly polls for Google Cast scripts even if the extension isn't installed.

From one commenter:

... it appears that Chrome attempts to get cast_sender.js on pages that have YouTube content. I'm guessing when Chrome sees media that it can stream it attempts to access the Chromecast extension. When the extension isn't present, the error is thrown.

Read more

The only solution I've come across is to install the Google Cast extension, whether you need it or not. You may then hide the toolbar button.

For more information and updates, see this SO question. Here's the official issue.

There are two ways to think about your phrase "application heap size available":

1. How much heap can my app use before a hard error is triggered? And

2. How much heap should my app use, given the constraints of the Android OS version and hardware of the user's device?

There is a different method for determining each of the above.

For item 1 above: maxMemory()

which can be invoked (e.g., in your main activity's onCreate() method) as follows:

Runtime rt = Runtime.getRuntime();
long maxMemory = rt.maxMemory();
Log.v("onCreate", "maxMemory:" + Long.toString(maxMemory));

This method tells you how many total bytes of heap your app is allowed to use.

For item 2 above: getMemoryClass()

which can be invoked as follows:

ActivityManager am = (ActivityManager) getSystemService(ACTIVITY_SERVICE);
int memoryClass = am.getMemoryClass();
Log.v("onCreate", "memoryClass:" + Integer.toString(memoryClass));

This method tells you approximately how many megabytes of heap your app should use if it wants to be properly respectful of the limits of the present device, and of the rights of other apps to run without being repeatedly forced into the onStop() / onResume() cycle as they are rudely flushed out of memory while your elephantine app takes a bath in the Android jacuzzi.

This distinction is not clearly documented, so far as I know, but I have tested this hypothesis on five different Android devices (see below) and have confirmed to my own satisfaction that this is a correct interpretation.

For a stock version of Android, maxMemory() will typically return about the same number of megabytes as are indicated in getMemoryClass() (i.e., approximately a million times the latter value).

The only situation (of which I am aware) for which the two methods can diverge is on a rooted device running an Android version such as CyanogenMod, which allows the user to manually select how large a heap size should be allowed for each app. In CM, for example, this option appears under "CyanogenMod settings" / "Performance" / "VM heap size".

NOTE: BE AWARE THAT SETTING THIS VALUE MANUALLY CAN MESS UP YOUR SYSTEM, ESPECIALLY if you select a smaller value than is normal for your device.

Here are my test results showing the values returned by maxMemory() and getMemoryClass() for four different devices running CyanogenMod, using two different (manually-set) heap values for each:

• G1:
  • With VM Heap Size set to 16MB:
    • maxMemory: 16777216
    • getMemoryClass: 16
  • With VM Heap Size set to 24MB:
    • maxMemory: 25165824
    • getMemoryClass: 16
• Moto Droid:
  • With VM Heap Size set to 24MB:
    • maxMemory: 25165824
    • getMemoryClass: 24
  • With VM Heap Size set to 16MB:
    • maxMemory: 16777216
    • getMemoryClass: 24
• Nexus One:
  • With VM Heap size set to 32MB:
    • maxMemory: 33554432
    • getMemoryClass: 32
  • With VM Heap size set to 24MB:
    • maxMemory: 25165824
    • getMemoryClass: 32
• Viewsonic GTab:
  • With VM Heap Size set to 32:
    • maxMemory: 33554432
    • getMemoryClass: 32
  • With VM Heap Size set to 64:
    • maxMemory: 67108864
    • getMemoryClass: 32

In addition to the above, I tested on a Novo7 Paladin tablet running Ice Cream Sandwich. This was essentially a stock version of ICS, except that I've rooted the tablet through a simple process that does not replace the entire OS, and in particular does not provide an interface that would allow the heap size to be manually adjusted.

For that device, here are the results:

• Novo7
  • maxMemory: 62914560
  • getMemoryClass: 60

Also (per Kishore in a comment below):

• HTC One X
  • maxMemory: 67108864
  • getMemoryClass: 64

And (per akauppi's comment):

• Samsung Galaxy Core Plus
  • maxMemory: (Not specified in comment)
  • getMemoryClass: 48
  • largeMemoryClass: 128

Per a comment from cmcromance:

• Galaxy S3 (Jelly Bean) large heap
  • maxMemory: 268435456
  • getMemoryClass: 64

And (per tencent's comments):

• LG Nexus 5 (4.4.3) normal
  • maxMemory: 201326592
  • getMemoryClass: 192
• LG Nexus 5 (4.4.3) large heap
  • maxMemory: 536870912
  • getMemoryClass: 192
• Galaxy Nexus (4.3) normal
  • maxMemory: 100663296
  • getMemoryClass: 96
• Galaxy Nexus (4.3) large heap
  • maxMemory: 268435456
  • getMemoryClass: 96
• Galaxy S4 Play Store Edition (4.4.2) normal
  • maxMemory: 201326592
  • getMemoryClass: 192
• Galaxy S4 Play Store Edition (4.4.2) large heap
  • maxMemory: 536870912
  • getMemoryClass: 192

Other Devices

• Huawei Nexus 6P (6.0.1) normal
  • maxMemory: 201326592
  • getMemoryClass: 192

I haven't tested these two methods using the special android:largeHeap="true" manifest option available since Honeycomb, but thanks to cmcromance and tencent we do have some sample largeHeap values, as reported above.

My expectation (which seems to be supported by the largeHeap numbers above) would be that this option would have an effect similar to setting the heap manually via a rooted OS - i.e., it would raise the value of maxMemory() while leaving getMemoryClass() alone. There is another method, getLargeMemoryClass(), that indicates how much memory is allowable for an app using the largeHeap setting. The documentation for getLargeMemoryClass() states, "most applications should not need this amount of memory, and should instead stay with the getMemoryClass() limit."

If I've guessed correctly, then using that option would have the same benefits (and perils) as would using the space made available by a user who has upped the heap via a rooted OS (i.e., if your app uses the additional memory, it probably will not play as nicely with whatever other apps the user is running at the same time).

Note that the memory class apparently need not be a multiple of 8MB.

We can see from the above that the getMemoryClass() result is unchanging for a given device/OS configuration, while the maxMemory() value changes when the heap is set differently by the user.

My own practical experience is that on the G1 (which has a memory class of 16), if I manually select 24MB as the heap size, I can run without erroring even when my memory usage is allowed to drift up toward 20MB (presumably it could go as high as 24MB, although I haven't tried this). But other similarly large-ish apps may get flushed from memory as a result of my own app's pigginess. And, conversely, my app may get flushed from memory if these other high-maintenance apps are brought to the foreground by the user.

So, you cannot go over the amount of memory specified by maxMemory(). And, you should try to stay within the limits specified by getMemoryClass(). One way to do that, if all else fails, might be to limit functionality for such devices in a way that conserves memory.

Finally, if you do plan to go over the number of megabytes specified in getMemoryClass(), my advice would be to work long and hard on the saving and restoring of your app's state, so that the user's experience is virtually uninterrupted if an onStop() / onResume() cycle occurs.

In my case, for reasons of performance I'm limiting my app to devices running 2.2 and above, and that means that almost all devices running my app will have a memoryClass of 24 or higher. So I can design to occupy up to 20MB of heap and feel pretty confident that my app will play nice with the other apps the user may be running at the same time.

But there will always be a few rooted users who have loaded a 2.2 or above version of Android onto an older device (e.g., a G1). When you encounter such a configuration, ideally, you ought to pare down your memory use, even if maxMemory() is telling you that you can go much higher than the 16MB that getMemoryClass() is telling you that you should be targeting. And if you cannot reliably ensure that your app will live within that budget, then at least make sure that onStop() / onResume() works seamlessly.

getMemoryClass(), as indicated by Diane Hackborn (hackbod) above, is only available back to API level 5 (Android 2.0), and so, as she advises, you can assume that the physical hardware of any device running an earlier version of the OS is designed to optimally support apps occupying a heap space of no more than 16MB.

By contrast, maxMemory(), according to the documentation, is available all the way back to API level 1. maxMemory(), on a pre-2.0 version, will probably return a 16MB value, but I do see that in my (much later) CyanogenMod versions the user can select a heap value as low as 12MB, which would presumably result in a lower heap limit, and so I would suggest that you continue to test the maxMemory() value, even for versions of the OS prior to 2.0. You might even have to refuse to run in the unlikely event that this value is set even lower than 16MB, if you need to have more than maxMemory() indicates is allowed.

Change

$info=$_POST['id[]'];

to

$info=$_POST['id'];

by adding [] to the end of your form field names, PHP will automatically convert these variables into arrays.

There are many uses for the **null** value in the Boolean wrapper! :)

For example, you may have in a form a field named "newsletter" that indicate if the user want or doesn't want a newsletter from your site. If the user doesn't select a value in this field, you may want to implement a default behaviour to that situation (send? don't send?, question again?, etc) . Clearly, not set (or not selected or **null**), is not the same that true or false.

But, if "not set" doesn't apply to your model, don't change the boolean primitive ;)

Try This: Application.ExitThread();

This will print everything after each match, on that same line only:

perl -lne 'print $1 if /^potato:\s*(.*)/' file.txt

This will do the same, except it will also print all subsequent lines:

perl -lne 'if ($found){print} elsif (/^potato:\s*(.*)/){print $1; $found++}' file.txt

These command-line options are used:

• -n loop around each line of the input file
• -l removes newlines before processing, and adds them back in afterwards
• -e execute the perl code

I'm running MacOS Catalina(10.15.3) and find my.cnf in /usr/local/etc.

Here is the program in java which is O(N^2)

import java.util.Stack;


public class GetTripletPair {

    /** Set a value for target sum */
    public static final int TARGET_SUM = 32;

    private Stack<Integer> stack = new Stack<Integer>();

    /** Store the sum of current elements stored in stack */
    private int sumInStack = 0;
    private int count =0 ;


    public void populateSubset(int[] data, int fromIndex, int endIndex) {

        /*
        * Check if sum of elements stored in Stack is equal to the expected
        * target sum.
        * 
        * If so, call print method to print the candidate satisfied result.
        */
        if (sumInStack == TARGET_SUM) {
            print(stack);
        }

        for (int currentIndex = fromIndex; currentIndex < endIndex; currentIndex++) {

            if (sumInStack + data[currentIndex] <= TARGET_SUM) {
                ++count;
                stack.push(data[currentIndex]);
                sumInStack += data[currentIndex];

                /*
                * Make the currentIndex +1, and then use recursion to proceed
                * further.
                */
                populateSubset(data, currentIndex + 1, endIndex);
                --count;
                sumInStack -= (Integer) stack.pop();
            }else{
            return;
        }
        }
    }

    /**
    * Print satisfied result. i.e. 15 = 4+6+5
    */

    private void print(Stack<Integer> stack) {
        StringBuilder sb = new StringBuilder();
        sb.append(TARGET_SUM).append(" = ");
        for (Integer i : stack) {
            sb.append(i).append("+");
        }
        System.out.println(sb.deleteCharAt(sb.length() - 1).toString());
    }

    private static final int[] DATA = {4,13,14,15,17};

    public static void main(String[] args) {
        GetAllSubsetByStack get = new GetAllSubsetByStack();
        get.populateSubset(DATA, 0, DATA.length);
    }
}

Set focus on the first text field:

 $("input:text:visible:first").focus();

This also does the first text field, but you can change the [0] to another index:

$('input[@type="text"]')[0].focus(); 

Or, you can use the ID:

$("#someTextBox").focus();

Short answer:

$ ssh-keygen -p

This will then prompt you to enter the keyfile location, the old passphrase, and the new passphrase (which can be left blank to have no passphrase).

If you would like to do it all on one line without prompts do:

$ ssh-keygen -p [-P old_passphrase] [-N new_passphrase] [-f keyfile]

Important: Beware that when executing commands they will typically be logged in your ~/.bash_history file (or similar) in plain text including all arguments provided (i.e. the passphrases in this case). It is, therefore, is recommended that you use the first option unless you have a specific reason to do otherwise.

Notice though that you can still use -f keyfile without having to specify -P nor -N, and that the keyfile defaults to ~/.ssh/id_rsa, so in many cases, it's not even needed.

You might want to consider using ssh-agent, which can cache the passphrase for a time. The latest versions of gpg-agent also support the protocol that is used by ssh-agent.

A Protocol?

I found this, it appears to be a local setting for a computer...

http://kb.mozillazine.org/Register_protocol

FYI Putty Users can set the options here

I tried your code and found it wasn't working.

I had to change

if (intent.getAction() == SMS_RECEIVED) {

to

if (intent.getAction().equals(SMS_RECEIVED)) {

Now it's working. It's just an issue with java checking equality.

Just in case someone is looking for solution in Swift, throw this in your code:

override func viewWillAppear(_ animated: Bool) {
    super.viewWillAppear(animated)

    NotificationCenter.default.addObserver(self, selector: #selector(keyboardWillShow(notification:)), name: .UIKeyboardWillShow, object: nil)
    NotificationCenter.default.addObserver(self, selector: #selector(keyboardWillHide(notification:)), name: .UIKeyboardWillHide, object: nil)
}

override func viewWillDisappear(_ animated: Bool) {
    super.viewWillDisappear(animated)

    NotificationCenter.default.removeObserver(self, name: .UIKeyboardWillShow, object: nil)
    NotificationCenter.default.removeObserver(self, name: .UIKeyboardWillHide, object: nil)
}


@objc func keyboardWillShow(notification: Notification) {
    if let userInfo = notification.userInfo {
        if let keyboardSize = (userInfo[UIKeyboardFrameBeginUserInfoKey] as? NSValue)?.cgRectValue {
            UIView.animate(withDuration: 0.3) {
                var alteredFrame = self.view.frame
                alteredFrame.origin.y = -keyboardSize.height
                self.view.frame = alteredFrame
            }
        }
    }
}

@objc func keyboardWillHide(notification: Notification) {
    UIView.animate(withDuration: 0.3) {
        var alteredFrame = self.view.frame
        alteredFrame.origin.y = 0.0
        self.view.frame = alteredFrame
    }
}

Arrays are, in general, a poor data structure to use if you want to ask if a particular object is in the collection or not.

If you'll be running this search frequently, it might be worth it to use a Dictionary<string, something> rather than an array. Lookups in a Dictionary are O(1) (constant-time), while searching through the array is O(N) (takes time proportional to the length of the array).

Even if the array is only 200 items at most, if you do a lot of these searches, the Dictionary will likely be faster.

There is another case where this status will be returned: if the Jackson mapper cannot figure out how to serialize your bean. For example, if you have two accessor methods for the same boolean property, isFoo() and getFoo().

removed getFoo() and put isFoo(). it worked for me.

There are 2 main solutions:

The pure HTML one:

<input type="text" id="Textbox" name="Textbox" maxlength="10" />

The JavaScript one (attach it to a onKey Event):

function limitText(limitField, limitNum) {
    if (limitField.value.length > limitNum) {
        limitField.value = limitField.value.substring(0, limitNum);
    } 
}

But anyway, there is no good solution. You can not adapt to every client's bad HTML implementation, it's an impossible fight to win. That's why it's far better to check it on the server side, with a PHP / Python / whatever script.

Didn't wan to mess with carbon. So here's my solution

$start = new \DateTime('now');
$start->modify('first day of this month');
$end = new \DateTime('now');
$end->modify('last day of this month');

$new_releases = Game::whereBetween('release', array($start, $end))->get();

If you have saved the excel file in the same folder as your python program (relative paths) then you just need to mention sheet number along with file name.

Example:

 data = pd.read_excel("wt_vs_ht.xlsx", "Sheet2")
 print(data)
 x = data.Height
 y = data.Weight
 plt.plot(x,y,'x')
 plt.show()

Add

android.lintOptions.abortOnError false

to your app\build.gradle

Does 0 count as a possible first digit? If so, then you need random.randint(0,10**n-1). If not, random.randint(10**(n-1),10**n-1). And if zero is never allowed, then you'll have to explicitly reject numbers with a zero in them, or draw n random.randint(1,9) numbers.

Aside: it is interesting that randint(a,b) uses somewhat non-pythonic "indexing" to get a random number a <= n <= b. One might have expected it to work like range, and produce a random number a <= n < b. (Note the closed upper interval.)

Given the responses in the comments about randrange, note that these can be replaced with the cleaner random.randrange(0,10**n), random.randrange(10**(n-1),10**n) and random.randrange(1,10).

Define "remove".

Arrays are fixed length and can not be resized once created. You can set an element to null to remove an object reference;

for (int i = 0; i < myStringArray.length(); i++)
{
    if (myStringArray[i].equals(stringToRemove))
    {
        myStringArray[i] = null;
        break;
    }
}

or

myStringArray[indexOfStringToRemove] = null;

If you want a dynamically sized array where the object is actually removed and the list (array) size is adjusted accordingly, use an ArrayList<String>

myArrayList.remove(stringToRemove); 

or

myArrayList.remove(indexOfStringToRemove);

Edit in response to OP's edit to his question and comment below

String r = myArrayList.get(rgenerator.nextInt(myArrayList.size()));

In your xml file add something like this with width and height as 'match_parent'.

<RelativeLayout
        android:id="@+id/bac_dim_layout"
        android:layout_width="match_parent"
        android:layout_height="match_parent"
        android:background="#C0000000"
        android:visibility="gone" >
</RelativeLayout>

In your activity oncreate

//setting background dim when showing popup
back_dim_layout = (RelativeLayout) findViewById(R.id.share_bac_dim_layout);

Finally make visible when you show your popupwindow and make its visible gone when you exit popupwindow.

back_dim_layout.setVisibility(View.VISIBLE);
back_dim_layout.setVisibility(View.GONE);

To get the parameters as a JSON object:

alert(getUrlParameters().toSource())

function explode(delim, str)
{
    return str.split(delim);
}

function getUrlParameters()
{
    var out = {};
    var str = window.location.search.replace("?", "");
    var subs = explode('&', str);
    for(var i = 0; i < subs.length; ++i)
    {
        var vals = explode('=', subs[i]);
        out[vals[0]] = vals[1];
    }
    return out;
}

Sure it is OK. Actually you can see for yourself easily:

l = range(12000)
l = sorted(l, reverse=True)

Running the those lines on my machine took:

real    0m0.036s
user    0m0.024s
sys  0m0.004s

But sure as everyone else said. The larger the array the slower the operations will be.

Use List.Insert(0, ...). But are you sure a LinkedList isn't a better fit? Each time you insert an item into an array at a position other than the array end, all existing items will have to be copied to make space for the new one.

This can be caused by the two sides of the connection disagreeing over whether the connection timed out or not during a keepalive. (Your code tries to reused the connection just as the server is closing it because it has been idle for too long.) You should basically just retry the operation over a new connection. (I'm surprised your library doesn't do this automatically.)

Just a heads up, while some of the answers posted here are correct (in a sense) one thing that you may need to do is go back to the root folder to delve down into the folder holding the image you want to set as the background. In other words, this code is correct in accomplishing your goal:

body {
    background-image:url('images/background.png');
    background-repeat:no-repeat;
    background-attachment:fixed;
}

But you may also need to add a little more to the code, like this:

body {
    background-image:url('../images/background.png');
    background-repeat:no-repeat;
    background-attachment:fixed;
}

The difference, as you can see, is that you may need to add “../” in front of the “images/background.png” call. This same rule also applies in HTML5 web pages. So if you are trying the first sample code listed here and you are still not getting the background image, try adding the “../” in front of “images”. Hope this helps .

Use the following attribute:

cls.__bases__

From the docs:

The tuple of base classes of a class object.

Example:

>>> str.__bases__
(<type 'basestring'>,)

Another example:

>>> class A(object):
...   pass
... 
>>> class B(object):
...   pass
... 
>>> class C(A, B):
...   pass
... 
>>> C.__bases__
(<class '__main__.A'>, <class '__main__.B'>)

emulator -writable-system

For people using an Emulator: Another possibility is that you need to start the emulator with -writable-system. That was the only thing that worked for me when using the standard emulator packaged with android studio with a 4.1 image. Check here: https://stackoverflow.com/a/41332316/4962858

hmm...seems like something on the order of sed -e "s/[ \t\n\r\v]//g" < hello.txt should be in the right ballpark (seems to work under cygwin in any case).

How about giving just \dt in psql? See https://www.postgresql.org/docs/current/static/app-psql.html.

I wanted a solution that did not create any extra objects (ie listeners) that would have to be garbage collected later, and did not require nesting a view holder inside an adapter class.

In the ViewHolder class

private static class MyViewHolder extends RecyclerView.ViewHolder implements View.OnClickListener {

        private final TextView ....// declare the fields in your view
        private ClickHandler ClickHandler;

        public MyHolder(final View itemView) {
            super(itemView);
            nameField = (TextView) itemView.findViewById(R.id.name);
            //find other fields here...
            Button myButton = (Button) itemView.findViewById(R.id.my_button);
            myButton.setOnClickListener(this);
        }
        ...
        @Override
        public void onClick(final View view) {
            if (clickHandler != null) {
                clickHandler.onMyButtonClicked(getAdapterPosition());
            }
        }

Points to note: the ClickHandler interface is defined, but not initialized here, so there is no assumption in the onClick method that it was ever initialized.

The ClickHandler interface looks like this:

private interface ClickHandler {
    void onMyButtonClicked(final int position);
} 

In the adapter, set an instance of 'ClickHandler' in the constructor, and override onBindViewHolder, to initialize `clickHandler' on the view holder:

private class MyAdapter extends ...{

    private final ClickHandler clickHandler;

    public MyAdapter(final ClickHandler clickHandler) {
        super(...);
        this.clickHandler = clickHandler;
    }

    @Override
    public void onBindViewHolder(final MyViewHolder viewHolder, final int position) {
        super.onBindViewHolder(viewHolder, position);
        viewHolder.clickHandler = this.clickHandler;
    }

Note: I know that viewHolder.clickHandler is potentially getting set multiple times with the exact same value, but this is cheaper than checking for null and branching, and there is no memory cost, just an extra instruction.

Finally, when you create the adapter, you are forced to pass a ClickHandlerinstance to the constructor, as so:

adapter = new MyAdapter(new ClickHandler() {
    @Override
    public void onMyButtonClicked(final int position) {
        final MyModel model = adapter.getItem(position);
        //do something with the model where the button was clicked
    }
});

Note that adapter is a member variable here, not a local variable

You can use Transfer Manager to upload multiple files, directories etc More info on:

https://docs.aws.amazon.com/sdk-for-java/v1/developer-guide/examples-s3-transfermanager.html

The zip Package should be installed in system.

To Zip a File

zip <filename.zip> <file>

Example:

zip doc.zip doc.txt 

To Unzip a File

unzip <filename.zip>

Example:

unzip mydata.zip

The following should work and is my recommendation (parameterized query):

DateTime dateTimeVariable = //some DateTime value, e.g. DateTime.Now;
SqlCommand cmd = new SqlCommand("INSERT INTO <table> (<column>) VALUES (@value)", connection);
cmd.Parameters.AddWithValue("@value", dateTimeVariable);

cmd.ExecuteNonQuery();

The solution of Kris is really nice, but I prefer a mix of factory and fluent style:

<?php

class Student
{

    protected $firstName;
    protected $lastName;
    // etc.

    /**
     * Constructor
     */
    public function __construct() {
        // allocate your stuff
    }

    /**
     * Static constructor / factory
     */
    public static function create() {
        return new self();
    }

    /**
     * FirstName setter - fluent style
     */
    public function setFirstName($firstName) {
        $this->firstName = $firstName;
        return $this;
    }

    /**
     * LastName setter - fluent style
     */
    public function setLastName($lastName) {
        $this->lastName = $lastName;
        return $this;
    }

}

// create instance
$student= Student::create()->setFirstName("John")->setLastName("Doe");

// see result
var_dump($student);
?>

From other member and my problem:

Camera Rotation issue depend on different Devices and certain Version.

Version 1.6: to fix the Rotation Issue, and it is good for most of devices

if (getResources().getConfiguration().orientation == Configuration.ORIENTATION_PORTRAIT)
        {   
            p.set("orientation", "portrait");
            p.set("rotation",90);
        }
        if (getResources().getConfiguration().orientation == Configuration.ORIENTATION_LANDSCAPE)
        {                               
            p.set("orientation", "landscape");          
            p.set("rotation", 90);
        }

Version 2.1: depend on kind of devices, for example, Cannt fix the issue with XPeria X10, but it is good for X8, and Mini

Camera.Parameters parameters = camera.getParameters();
parameters.set("orientation", "portrait");
camera.setParameters(parameters);

Version 2.2: not for all devices

camera.setDisplayOrientation(90);

http://code.google.com/p/android/issues/detail?id=1193#c42

Actually this is pretty easy since Windows Vista. Microsoft added the command FORFILES

in your case

forfiles /p c:\directory /m *.xls /c "cmd /c ssconvert @file @fname.xlsx"

the only weird thing with this command is that forfiles automatically adds double quotes around @file and @fname. but it should work anyway

Port: In simple language, "Port" is a number used by a particular software to identify its data coming from internet.

Each software, like Skype, Chrome, Youtube has its own port number and that's how they know which internet data is for itself.

Socket: "IP address and Port " together is called "Socket". It is used by another computer to send data to one particular computer's particular software.

IP address is used to identify the computer and Port is to identify the software such as IE, Chrome, Skype etc.

In every home, there is one mailbox and multiple people. The mailbox is a host. Your own home mailbox is a localhost. Each person in a home has a room. All letters for that person are sent to his room, hence the room number is a port.

To enable Api do this

1. Go to API Manager
2. Click on Overview
3. Search for Google Maps JavaScript API(Under Google Maps APIs). Click on that
4. You will find Enable button there. Click to enable API.

OR You can try this url: Maps JavaScript API

Hope this will solve the problem of enabling API.

Just create the database using createdb CLI tool:

PGHOST="my.database.domain.com"
PGUSER="postgres"
PGDB="mydb"
createdb -h $PGHOST -p $PGPORT -U $PGUSER $PGDB

If the database exists, it will return an error:

createdb: database creation failed: ERROR:  database "mydb" already exists

You can use this one it's for YYYY-MM-DD. It checks if it's a valid date and that the value is not NULL. It returns TRUE if everythings check out to be correct or FALSE if anything is invalid. It doesn't get easier then this!

function validateDate(date) {
    var matches = /^(\d{4})[-\/](\d{2})[-\/](\d{2})$/.exec(date);
    if (matches == null) return false;
    var d = matches[3];
    var m = matches[2] - 1;
    var y = matches[1] ;
    var composedDate = new Date(y, m, d);
    return composedDate.getDate() == d &&
            composedDate.getMonth() == m &&
            composedDate.getFullYear() == y;
}

Be aware that months need to be subtracted like this: var m = matches[2] - 1; else the new Date() instance won't be properly made.

This will be useful..

.list-item{_x000D_
  margin-right:-10px;_x000D_
   margin-top:10px;_x000D_
    margin-bottom: 10px;_x000D_
    border: 1px solid #eee;_x000D_
    padding: 0px;_x000D_
  }

<div class="col-md-4">_x000D_
  <div class="list-item">_x000D_
      <h2>Your name</h2> _x000D_
  </div>_x000D_
</div>_x000D_
<div class="col-md-4">_x000D_
   <div class="list-item"></div>_x000D_
</div>

If use want to increase or decrease further margin in right side of the box then simply edit margin-right property of list-item.

sample output

You can't, Print Preview is a feature of a browser, and therefore should be protected from being called by JavaScript as it would be a security risk.

That's why your example uses Active X, which bypasses the JavaScript security issues.

So instead use the print stylesheet that you already should have and show it for media=screen,print instead of media=print.

Read Alist Apart: Going to Print for a good article on the subject of print stylesheets.

Yield

>>> def create_generator():
...    my_list = range(3)
...    for i in my_list:
...        yield i*i
...
>>> my_generator = create_generator() # create a generator
>>> print(my_generator) # my_generator is an object!
<generator object create_generator at 0xb7555c34>
>>> for i in my_generator:
...     print(i)
0
1
4

In short, you can see that the loop does not stop and continues to function even after the object or variable is sent (unlike return where the loop stops after execution).

With perl:

fg@erwin ~ $ perl -ne 'push @l, (split(/\s+/))[1]; END { print join(",", @l) . "\n" }' <<EOF
something1:    +12.0   (some unnecessary trailing data (this must go))
something2:    +15.5   (some more unnecessary trailing data)
something4:    +9.0   (some other unnecessary data)
something1:    +13.5  (blah blah blah)
EOF

+12.0,+15.5,+9.0,+13.5

Some notes that I also found useful:

• Keep your default values on the right side.

  function whatever($var1, $var2, $var3="constant", $var4="another")
  

• The default value of the argument must be a constant expression. It can't be a variable or a function call.

For those who struggle at capturing Enter key on TextBox or other input control, if your Form has AcceptButton defined, you will not be able to use KeyDown event to capture Enter.

What you should do is to catch the Enter key at form level. Add this code to the form:

protected override bool ProcessCmdKey(ref Message msg, Keys keyData)
{
    if ((this.ActiveControl == myTextBox) && (keyData == Keys.Return))
    {
        //do something
        return true;
    }
    else
    {
        return base.ProcessCmdKey(ref msg, keyData);
    }
}

How to stop a thread created by implementing runnable interface?

There are many ways that you can stop a thread but all of them take specific code to do so. A typical way to stop a thread is to have a volatile boolean shutdown field that the thread checks every so often:

  // set this to true to stop the thread
  volatile boolean shutdown = false;
  ...
  public void run() {
      while (!shutdown) {
          // continue processing
      }
  }

You can also interrupt the thread which causes sleep(), wait(), and some other methods to throw InterruptedException. You also should test for the thread interrupt flag with something like:

  public void run() {
      while (!Thread.currentThread().isInterrupted()) {
          // continue processing
          try {
              Thread.sleep(1000);
          } catch (InterruptedException e) {
              // good practice
              Thread.currentThread().interrupt();
              return;
          }
      }
  }

Note that that interrupting a thread with interrupt() will not necessarily cause it to throw an exception immediately. Only if you are in a method that is interruptible will the InterruptedException be thrown.

If you want to add a shutdown() method to your class which implements Runnable, you should define your own class like:

public class MyRunnable implements Runnable {
    private volatile boolean shutdown;
    public void run() {
        while (!shutdown) {
            ...
        }
    }
    public void shutdown() {
        shutdown = true;
    }
}

Slugify Rename (regex)

It is not exactly what the OP asked for, but what I was hoping to find on this page:

A "slugify" version for renaming files so they are similar to URLs (i.e. only include alphanumeric, dots, and dashes):

rename "s/[^a-zA-Z0-9\.]+/-/g" filename

You could actually take the PS suggestion a little further and create a vbs file in the project directory like this:

Option Explicit
Dim oShell, appCmd
Set oShell  = CreateObject("WScript.Shell")
appCmd      = "powershell -noexit Get-ChildItem .\ -include bin,obj -Recurse | foreach ($_) { remove-item $_.fullname -Force -Recurse -WhatIf }"
oShell.Run appCmd, 4, false

For safety, I have included -WhatIf parameter, so remove it if you are satisfied with the list on the first run.

Java has a class specifically for zip files and one even more specifically for Jar Files.

java.util.jar.JarOutputStream
java.util.jar.JarInputStream

using those you could, on a command from the console, using a scanner set to system.in

Scanner console = new Scanner(System.in);
String input = console.nextLine();

then get all the components and write them as a file.

JarEntry JE = null;
while((JE = getNextJarEntry()) != null)
{
    //do stuff with JE
}

You can also use java.util.zip.ZipInputStream instead, as seeing a JAR file is in the same format as a ZIP file, ZipInputStream will be able to handle the Jar file, in fact JarInputStream actually extends ZipInputStream.

an alternative is also instead of getNextJarEntry, to use getNextEntry

I would echo what Wyzard wrote but add that:

• for query parameters, HTML encoding is often exactly what the server is expecting; outside these, it is correct that URLEncoder should not be used
• the most recent URI spec is RFC 3986, so you should refer to that as a primary source

I wrote a blog post a while back about this subject: Java: safe character handling and URL building

read about the lists() method

$test=test::select('id')->where('id' ,'>' ,0)->lists('id')->toArray()

Mike's answer is working good until you are using the "re-use" bind value.
For example:

SELECT * FROM `an_modules` AS `m` LEFT JOIN `an_module_sites` AS `ms` ON m.module_id = ms.module_id WHERE 1 AND `module_enable` = :module_enable AND `site_id` = :site_id AND (`module_system_name` LIKE :search OR `module_version` LIKE :search)

The Mike's answer can only replace first :search but not the second.
So, I rewrite his answer to work with multiple parameters that can re-used properly.

public function interpolateQuery($query, $params) {
    $keys = array();
    $values = $params;
    $values_limit = [];

    $words_repeated = array_count_values(str_word_count($query, 1, ':_'));

    # build a regular expression for each parameter
    foreach ($params as $key => $value) {
        if (is_string($key)) {
            $keys[] = '/:'.$key.'/';
            $values_limit[$key] = (isset($words_repeated[':'.$key]) ? intval($words_repeated[':'.$key]) : 1);
        } else {
            $keys[] = '/[?]/';
            $values_limit = [];
        }

        if (is_string($value))
            $values[$key] = "'" . $value . "'";

        if (is_array($value))
            $values[$key] = "'" . implode("','", $value) . "'";

        if (is_null($value))
            $values[$key] = 'NULL';
    }

    if (is_array($values)) {
        foreach ($values as $key => $val) {
            if (isset($values_limit[$key])) {
                $query = preg_replace(['/:'.$key.'/'], [$val], $query, $values_limit[$key], $count);
            } else {
                $query = preg_replace(['/:'.$key.'/'], [$val], $query, 1, $count);
            }
        }
        unset($key, $val);
    } else {
        $query = preg_replace($keys, $values, $query, 1, $count);
    }
    unset($keys, $values, $values_limit, $words_repeated);

    return $query;
}

There are cases where you don't want to use v-model. If you have two inputs, and each depend on each other, you might have circular referential issues. Common use cases is if you're building an accounting calculator.

In these cases, it's not a good idea to use either watchers or computed properties.

Instead, take your v-model and split it as above answer indicates

<input
   :value="something"
   @input="something = $event.target.value"
>

In practice, if you are decoupling your logic this way, you'll probably be calling a method.

This is what it would look like in a real world scenario:

<script src="https://cdnjs.cloudflare.com/ajax/libs/vue/2.5.17/vue.js"></script>_x000D_
_x000D_
<div id="app">_x000D_
  <input :value="extendedCost" @input="_onInputExtendedCost" />_x000D_
  <p> {{ extendedCost }}_x000D_
</div>_x000D_
_x000D_
<script>_x000D_
  var app = new Vue({_x000D_
    el: "#app",_x000D_
    data: function(){_x000D_
      return {_x000D_
        extendedCost: 0,_x000D_
      }_x000D_
    },_x000D_
    methods: {_x000D_
      _onInputExtendedCost: function($event) {_x000D_
        this.extendedCost = parseInt($event.target.value);_x000D_
        // Go update other inputs here_x000D_
    }_x000D_
  }_x000D_
  });_x000D_
</script>

So Far, pydub worked best for me. Modules like playsound will also do the job, But It has only one single feature. pydub has many features like slicing the song(file), Adjusting the volume etc...

It is as simple as slicing the lists in python.

So, When it comes to just playing, It is as shown as below.

from pydub import AudioSegment
from pydub.playback import play

path_to_file = r"Music/Harry Potter Theme Song.mp3"
song = AudioSegment.from_mp3(path_to_file)
play(song)

The core thing is to define prefixes for namespaces and use them to fortify each and every tag - you are mixing 3 namespaces and that just doesn't fly by trying to hack defaults. It's also good to use exactly the prefixes used in the standard doc - just in case that the other side get a little sloppy.

Last but not least, it's much better to use default types for fields whenever you can - so for password you have to list the type, for the Nonce it's already Base64.

Make sure that you check that the generated token is correct before you send it via XML and don't forget that the content of wsse:Password is Base64( SHA-1 (nonce + created + password) ) and date-time in wsu:Created can easily mess you up. So once you fix prefixes and namespaces and verify that yout SHA-1 work fine without XML (just imagine you are validating the request and do the server side of SHA-1 calculation) you can also do a truial wihtout Created and even without Nonce. Oh and Nonce can have different encodings so if you really want to force another encoding you'll have to look further into wsu namespace.

<S11:Envelope xmlns:S11="..." xmlns:wsse="..." xmlns:wsu= "...">
  <S11:Header>
  ...
    <wsse:Security>
      <wsse:UsernameToken>
        <wsse:Username>NNK</wsse:Username>
        <wsse:Password Type="...#PasswordDigest">weYI3nXd8LjMNVksCKFV8t3rgHh3Rw==</wsse:Password>
        <wsse:Nonce>WScqanjCEAC4mQoBE07sAQ==</wsse:Nonce>
        <wsu:Created>2003-07-16T01:24:32</wsu:Created>
      </wsse:UsernameToken>
    </wsse:Security>
  ...
  </S11:Header>
...
</S11:Envelope>

DECLARE @MyDate datetime

-- ... set your datetime's initial value ...'

DATEADD(d, 1, @MyDate)

My case - Trying to use a Class from a swift framework in my objective c project, I got this error. Solution was to add Module (swift framework) of the class in Interface builder/ Storyboard as shown below. Nothing else

Depending on your PostgreSQL version you would need to add the postgresql driver to your pom.xml file.

For PostgreSQL 9.1 this would be:

<project xmlns="http://maven.apache.org/POM/4.0.0"
     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
     xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/maven-v4_0_0.xsd">

    <name>Your project name.</name>
    <dependencies>
        <dependency>
            <groupId>postgresql</groupId>
            <artifactId>postgresql</artifactId>
            <version>9.1-901-1.jdbc4</version>
        </dependency>
    </dependencies>
</project>

You can get the code for the dependency (as well as any other dependency) from maven's central repository

If you are using postgresql 9.2+:

<project xmlns="http://maven.apache.org/POM/4.0.0"
     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
     xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/maven-v4_0_0.xsd">

    <name>Your project name.</name>
    <dependencies>
        <dependency>
            <groupId>org.postgresql</groupId>
            <artifactId>postgresql</artifactId>
            <version>42.2.1</version>
        </dependency>
    </dependencies>
</project>

You can check the latest versions and dependency snippets from:

• http://mvnrepository.com/artifact/postgresql/postgresql
• http://mvnrepository.com/artifact/org.postgresql/postgresql

Try this:

var divFirst = document.getElementById("divFirst");
divFirst.style.visibility = 'visible'; 
divFirst.style.display = 'block';  
divFirst.tabIndex = "-1";  
divFirst.focus();

e.g @:

http://jsfiddle.net/Vgrey/

Is this what you are looking for ?

Sub getRowCol()

    Range("A1").Select ' example

    Dim col, row
    col = Split(Selection.Address, "$")(1)
    row = Split(Selection.Address, "$")(2)

    MsgBox "Column is : " & col
    MsgBox "Row is : " & row

End Sub

Another method is to use HTML5's Application Cache to download all files once and keep them in the browser's cache. The above link contains much more information. The following information is from the article:

Change your <html> tag to include a manifest attribute:

<html manifest="http://www.example.com/example.mf">

A manifest file must be served with the mime-type text/cache-manifest.

A simple manifest looks something like this:

CACHE MANIFEST
index.html
stylesheet.css
images/logo.png
scripts/main.js
http://cdn.example.com/scripts/main.js

Once an application is offline it remains cached until one of the following happens:

1. The user clears their browser's data storage for your site.
2. The manifest file is modified. Note: updating a file listed in the manifest doesn't mean the browser will re-cache that resource. The manifest file itself must be altered.

I agree with sunetos that you'll have to use the $.ajax function in order to pass request headers. In order to do that, you'll have to write a function for the beforeSend event handler, which is one of the $.ajax() options. Here's a quick sample on how to do that:

<html>
  <head>
    <script src="http://code.jquery.com/jquery-1.4.2.min.js"></script>
    <script type="text/javascript">
      $(document).ready(function() {
        $.ajax({
          url: 'service.svc/Request',
          type: 'GET',
          dataType: 'json',
          success: function() { alert('hello!'); },
          error: function() { alert('boo!'); },
          beforeSend: setHeader
        });
      });

      function setHeader(xhr) {
        xhr.setRequestHeader('securityCode', 'Foo');
        xhr.setRequestHeader('passkey', 'Bar');
      }
    </script>
  </head>
  <body>
    <h1>Some Text</h1>
  </body>
</html>

If you run the code above and watch the traffic in a tool like Fiddler, you'll see two requests headers passed in:

• securityCode with a value of Foo
• passkey with a value of Bar

The setHeader function could also be inline in the $.ajax options, but I wanted to call it out.

Hope this helps!

set ROOT=c:\programs 
set SRC_ROOT=%ROOT%\System\Source

IMHO the real answer is that you can't escape single-quotes within single-quoted strings.

Its impossible.

If we presume we are using bash.

From bash manual...

Enclosing characters in single quotes preserves the literal value of each
character within the quotes.  A single quote may not occur
between single quotes, even when preceded by a backslash.

You need to use one of the other string escape mechanisms " or \

There is nothing magic about alias that demands it use single quotes.

Both the following work in bash.

alias rxvt="urxvt -fg '#111111' -bg '#111111'"
alias rxvt=urxvt\ -fg\ \'#111111\'\ -bg\ \'#111111\'

The latter is using \ to escape the space character.

There is also nothing magic about #111111 that requires single quotes.

The following options achieves the same result the other two options, in that the rxvt alias works as expected.

alias rxvt='urxvt -fg "#111111" -bg "#111111"'
alias rxvt="urxvt -fg \"#111111\" -bg \"#111111\""

You can also escape the troublesome # directly

alias rxvt="urxvt -fg \#111111 -bg \#111111"

No need to use rectangles ... compare the coordinates of 2 players constantly.

like if(x1===x&&y1==y) remember to increase the range of x when ur comparing.

if ur rectangle width is 30 take as if (x1>x&&x2>x+30)..likewise y

using System.Web.Script.Serialization; 

is in assembly : System.Web.Extensions (System.Web.Extensions.dll)

You can also use generic types, in my case, taking into account everything said before you can do something like:

public class SomeTypeManager<T> {

    public SomeTypeManager(T someGeneric) {

        //That's how you can achieve all previously said, with generic types.
        Annotation[] an = someGeneric.getClass().getAnnotations();

    }

}

Remember, that this will not equival at 100% to SomeClass.class.get(...)();

But can do the trick...

In my case I found that simply clearing the animation on the view before setting the visibility to GONE works.

dp2.clearAnimation();
dp2.setVisibility(View.GONE);

I had a similar issue where I toggle between two views, one of which must always start off as GONE - But when I displayed the views again, it was displaying over the first view even if setVisibility(GONE) was called. Clearing the animation before setting the view to GONE worked.

printAccountSummary: function()
        {return "Welcome!" + "\n" + "Your balance is currently $1000 and your interest rate is 1%."}
};
console.log(savingsAccount.printAccountSummary()); // method

Prints:

Welcome!
Your balance is currently $1000 and your interest rate is 1%.

You're calling writer.close(); after you've done writing to it. Once a stream is closed, it can not be written to again. Usually, the way I go about implementing this is by moving the close out of the write to method.

public void writeToFile(){
    String file_text= pedStatusText + "     " + gatesStatus + "     " + DrawBridgeStatusText;
    try {
        writer.write(file_text);
        writer.flush();
    } catch (IOException e) {
        // TODO Auto-generated catch block
        e.printStackTrace();
    }
}

And add a method cleanUp to close the stream.

public void cleanUp() {
     writer.close();
}

This means that you have the responsibility to make sure that you're calling cleanUp when you're done writing to the file. Failure to do this will result in memory leaks and resource locking.

EDIT: You can create a new stream each time you want to write to the file, by moving writer into the writeToFile() method..

 public void writeToFile() {
    FileWriter writer = new FileWriter("status.txt", true);
    // ... Write to the file.

    writer.close();
 }

 /* use the object of your fragment to call the 
 * onRequestPermissionsResult in fragment after
 * in activity and use different request Code for 
 * both Activity and Fragment */

   if (isFragment)
    mFragment.requestPermissions(permissions.toArray(new
    String[permissions.size()]),requestPermission);

   else
    ActivityCompat.requestPermissions(mActivity,permissions.toArray(new
    String[permissions.size()]),requestPermission);

This would work just fine, set the height to desired pixel

#inner-right{
            height: 100px;
            overflow:auto;
            }

Use the below method for calculating the distance of two different locations.

public double getKilometers(double lat1, double long1, double lat2, double long2) {
 double PI_RAD = Math.PI / 180.0;
 double phi1 = lat1 * PI_RAD;
 double phi2 = lat2 * PI_RAD;
 double lam1 = long1 * PI_RAD;
 double lam2 = long2 * PI_RAD;

return 6371.01 * acos(sin(phi1) * sin(phi2) + cos(phi1) * cos(phi2) * cos(lam2 - lam1));}

A small variation but nothing new infact. It's really missing a feature...

select info->>'name' from rabbits 
where '"carrots"' = ANY (ARRAY(
    select * from json_array_elements(info->'food'))::text[]);

I think that the thing you must keep in mind is that your XML is being processed by a machine, not a human, so it only needs to be readable for the machine.

In other words, I think you should use whatever XML schema you need to make parsing/processing the rules as efficient as possible at run time.

As far as your current schema goes, I think that the id attribute should be unique per element, so perhaps you should use a different attribute to capture the relationship among your IF, THEN, and ELSE elements.

Yes, on the server side $_SERVER['DOCUMENT_ROOT'] is equivalent to / on the client side.

For example: the value of "{$_SERVER['DOCUMENT_ROOT']}/images/thumbnail.png" will be the string /var/www/html/images/thumbnail.png on a server where it's local file at that path can be reached from the client side at the url http://example.com/images/thumbnail.png

No, in other words the value of $_SERVER['DOCUMENT_ROOT'] is not / rather it is the server's local path to what the server shows the client at example.com/

note: $_SERVER['DOCUMENT_ROOT'] does not include a trailing /

Short and sweet.

I came up with solution to remove error message and preserve one-liner form and efficient performance:

$lastEl = array_values(array_slice($array, -1))[0];

-- previous solution

$lastEl = array_pop((array_slice($array, -1)));

Note: The extra parentheses are needed to avoid a PHP Strict standards: Only variables should be passed by reference.

Cast the null literal: (DateTime?)null or (Nullable<DateTime>)null.

You can also use default(DateTime?) or default(Nullable<DateTime>)

And, as other answers have noted, you can also apply the cast to the DateTime value rather than to the null literal.

EDIT (adapted from my comment to Prutswonder's answer):

The point is that the conditional operator does not consider the type of its assignment target, so it will only compile if there is an implicit conversion from the type of its second operand to the type of its third operand, or from the type of its third operand to the type of its second operand.

For example, this won't compile:

bool b = GetSomeBooleanValue();
object o = b ? "Forty-two" : 42;

Casting either the second or third operand to object, however, fixes the problem, because there is an implicit conversion from int to object and also from string to object:

object o = b ? "Forty-two" : (object)42;

or

object o = b ? (object)"Forty-two" : 42;

I was getting same error because of configuration issue in intellij. As shown in screenshot. Main and test module was pointing to two different JDK. (Press F12 on the intellij project to open module settings)

Also all my dto's were using @lombok.Builder which I changed it to @Data.

In summary:

The ApplicationContext includes all functionality of the BeanFactory. It is generally recommended to use the former.

There are some limited situations such as in a Mobile application, where memory consumption might be critical.

In that scenarios, It can be justifiable to use the more lightweight BeanFactory. However, in the most enterprise applications, the ApplicationContext is what you will want to use.

For more, see my blog post:

Difference between BeanFactory and ApplicationContext in Spring – The java spring blog from the basics

If you're using Node.js:

> var ObjectId = require('mongodb').ObjectId; 
> var id = req.params.gonderi_id;       
> var o_id = new ObjectId(id);
> db.test.find({_id:o_id})

Edit: corrected to new ObjectId(id), not new ObjectID(id)

Check your dump file. Looks like a stray character at the beginning. SQL isn't standard the world around, and the MySQL importer expects MySQL-friendly SQL. I'm willing to bet that your exporter did something funky.

You may have to massage the file a bit to get it to work with MySQL.

First create an object of class2 in class1 and then use that object to call any function of class2 for example write this in class1

class2 obj= new class2();
obj.thefunctioname(args);

json loads -> returns an object from a string representing a json object.

json dumps -> returns a string representing a json object from an object.

load and dump -> read/write from/to file instead of string

You can change the background or ripple color of each Tab like this:

    //set ripple color for each tab
    for(int n = 0; n < mTabLayout.getTabCount(); n++){

        View tab = ((ViewGroup)mTabLayout.getChildAt(0)).getChildAt(n);

        if(tab != null && tab.getBackground() instanceof RippleDrawable){
            RippleDrawable rippleDrawable = (RippleDrawable)tab.getBackground();
            if (rippleDrawable != null) {
                rippleDrawable.setColor(ColorStateList.valueOf(rippleColor));
            }
        }
    }

Here you have few solutions ;)

http://www.bennadel.com/blog/122-Getting-Only-the-Date-Part-of-a-Date-Time-Stamp-in-SQL-Server.htm

The GPS icon seems to change its state according to received broadcast intents. You can change its state yourself with the following code samples:

Notify that the GPS has been enabled:

Intent intent = new Intent("android.location.GPS_ENABLED_CHANGE");
intent.putExtra("enabled", true);
sendBroadcast(intent);

Notify that the GPS is receiving fixes:

Intent intent = new Intent("android.location.GPS_FIX_CHANGE");
intent.putExtra("enabled", true);
sendBroadcast(intent);

Notify that the GPS is no longer receiving fixes:

Intent intent = new Intent("android.location.GPS_FIX_CHANGE");
intent.putExtra("enabled", false);
sendBroadcast(intent);

Notify that the GPS has been disabled:

Intent intent = new Intent("android.location.GPS_ENABLED_CHANGE");
intent.putExtra("enabled", false);
sendBroadcast(intent);

Example code to register receiver to the intents:

// MyReceiver must extend BroadcastReceiver
MyReceiver receiver = new MyReceiver();
IntentFilter filter = new IntentFilter("android.location.GPS_ENABLED_CHANGE");
filter.addAction("android.location.GPS_FIX_CHANGE");
registerReceiver(receiver, filter);

By receiving these broadcast intents you can notice the changes in GPS status. However, you will be notified only when the state changes. Thus it is not possible to determine the current state using these intents.

Ternjs is a new alternative for getting JS autocompletion. http://ternjs.net/

Sublime Plugin

The most well-maintained Tern plugin for Sublime Text is called 'tern_for_sublime'

There is also an older plugin called 'TernJS'. It is unmaintained and contains several performance related bugs, that cause Sublime Text to crash, so avoid that.

With psutil:

(can be installed with [sudo] pip install psutil)

import psutil

# Get current process pid
current_process_pid = psutil.Process().pid
print(current_process_pid)  # e.g 12971

# Get pids by program name
program_name = 'chrome'
process_pids = [process.pid for process in psutil.process_iter() if process.name == program_name]
print(process_pids)  # e.g [1059, 2343, ..., ..., 9645]

for (int i = 0; i < x.length; i++) {

    for (int j = i + 1; j < x.length; j++) {

        if (x[i] == x[j]) {
            y[i] = x[i];
            times[i]++;
        }

    }

}

update:

I found the terms of use from Google Map:

Section 10.5

No caching or storage. You will not pre-fetch, cache, index, or store any Content to be used outside the Service, except that you may store limited amounts of Content solely for the purpose of improving the performance of your Maps API Implementation due to network latency (and not for the purpose of preventing Google from accurately tracking usage), and only if such storage: is temporary (and in no event more than 30 calendar days); is secure; does not manipulate or aggregate any part of the Content or Service; and does not modify attribution in any way.

It means we can cache for limited time actually

Based on this post here you can simply download the Microsoft Visual Studio 2010 Shell (Integrated) Redistributable Package and the targets are installed.

This avoids the need to install Visual Studio on the build server.

I have just tried this out now, and can verify that it works:

Before:

error MSB4019: The imported project "C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v10.0\WebApplications\Microsoft.WebApplication.targets" was not found. Confirm that the path in the declaration is correct, and that the file exists on disk.

After the install:

[Builds correctly]

This is a far better solution than installing Visual Studio on a build server, obviously.

Open phpmyadmin, go to database and corresponding table to find it out.

If you keep in mind that Docker is still running in a VM, the system paths are relative to the VM and not from the Mac Osx system. As it says all is contained in a VM file :

/Users/MyUserName/Library/Containers/com.docker.docker/Data/com.docker.driver.amd64-linux/Docker.qcow2

Try to run Alpine image with this volume option and the ls command you are able to list the VM host:

docker run --rm -it -v /:/vm-root alpine:edge ls -l /vm-root

After this just try :

docker run --rm -it -v /:/vm-root alpine:edge ls -l /vm-root/var/lib/docker

Now, you are able to list the docker folder from the VM host

http://www.allegro.cc/

http://en.wikipedia.org/wiki/Allegro_library

nginx, like all well-behaved programs, can be configured not to self-daemonize.

Use the daemon off configuration directive described in http://wiki.nginx.org/CoreModule.

Using object-scan seems a bit overkill, but you can simply do

// const objectScan = require('object-scan');

const get = (obj, p) => objectScan([p], { abort: true, rtn: 'value' })(obj);

const obj = { a: { b: '1', c: '2' } };

console.log(get(obj, 'a.b'));
// => 1

console.log(get(obj, '*.c'));
// => 2

.as-console-wrapper {max-height: 100% !important; top: 0}

<script src="https://bundle.run/[email protected]"></script>

Disclaimer: I'm the author of object-scan

There are a lot more advanced examples in the readme.

git add -A
git diff HEAD

Generate patch if required, and then:

git reset HEAD

You can start by installing the below given command in the conda environment:

conda install pip

Followed by installing all pip packages you need in the environment.

After installing all the conda and pip packages to export the environment use:

conda env export -n <env-name> > environment.yml

This will create the required file in the folder

http://web.archive.org/web/20131107050923/http://www.roman10.net/serial-port-communication-in-python/comment-page-1/

#!/usr/bin/python

import serial, time
#initialization and open the port

#possible timeout values:
#    1. None: wait forever, block call
#    2. 0: non-blocking mode, return immediately
#    3. x, x is bigger than 0, float allowed, timeout block call

ser = serial.Serial()
#ser.port = "/dev/ttyUSB0"
ser.port = "/dev/ttyUSB7"
#ser.port = "/dev/ttyS2"
ser.baudrate = 9600
ser.bytesize = serial.EIGHTBITS #number of bits per bytes
ser.parity = serial.PARITY_NONE #set parity check: no parity
ser.stopbits = serial.STOPBITS_ONE #number of stop bits
#ser.timeout = None          #block read
ser.timeout = 1            #non-block read
#ser.timeout = 2              #timeout block read
ser.xonxoff = False     #disable software flow control
ser.rtscts = False     #disable hardware (RTS/CTS) flow control
ser.dsrdtr = False       #disable hardware (DSR/DTR) flow control
ser.writeTimeout = 2     #timeout for write

try: 
    ser.open()
except Exception, e:
    print "error open serial port: " + str(e)
    exit()

if ser.isOpen():

    try:
        ser.flushInput() #flush input buffer, discarding all its contents
        ser.flushOutput()#flush output buffer, aborting current output 
                 #and discard all that is in buffer

        #write data
        ser.write("AT+CSQ")
        print("write data: AT+CSQ")

       time.sleep(0.5)  #give the serial port sometime to receive the data

       numOfLines = 0

       while True:
          response = ser.readline()
          print("read data: " + response)

        numOfLines = numOfLines + 1

        if (numOfLines >= 5):
            break

        ser.close()
    except Exception, e1:
        print "error communicating...: " + str(e1)

else:
    print "cannot open serial port "

I zipped the xml in a Mac OS and sent it to a Windows machine, the default compression changes these files so the encoding sent this message.

15841:error:140790E5:SSL routines:SSL23_WRITE:ssl handshake failure:s23_lib.c:188:
...
SSL handshake has read 0 bytes and written 121 bytes

This is a handshake failure. The other side closes the connection without sending any data ("read 0 bytes"). It might be, that the other side does not speak SSL at all. But I've seen similar errors on broken SSL implementation, which do not understand newer SSL version. Try if you get a SSL connection by adding -ssl3 to the command line of s_client.

You can do this in XAML easily enough:

<TextBlock>
  Hello <Bold>my</Bold> faithful <Underline>computer</Underline>.<Italic>You rock!</Italic>
</TextBlock>

public void printMapV2 (Map <?, ?> map) {
    StringBuilder sb = new StringBuilder(128);
    sb.append("{");
    for (Map.Entry<?,?> entry : map.entrySet()) {
        if (sb.length()>1) {
            sb.append(", ");
        }
        sb.append(entry.getKey()).append("=").append(entry.getValue());
    }
    sb.append("}");
    System.out.println(sb);
}

If the field is already a string, this will work

 SELECT RIGHT('000'+ISNULL(field,''),3)

If you want nulls to show as '000'

It might be an integer -- then you would want

 SELECT RIGHT('000'+CAST(field AS VARCHAR(3)),3)

As required by the question this answer only works if the length <= 3, if you want something larger you need to change the string constant and the two integer constants to the width needed. eg '0000' and VARCHAR(4)),4

Or you can just create your own MediaTypeFormatter. I use this for text/html. If you add text/plain to it, it'll work for you too:

public class TextMediaTypeFormatter : MediaTypeFormatter
{
    public TextMediaTypeFormatter()
    {
        SupportedMediaTypes.Add(new MediaTypeHeaderValue("text/html"));
    }

    public override Task<object> ReadFromStreamAsync(Type type, Stream readStream, HttpContent content, IFormatterLogger formatterLogger)
    {
        return ReadFromStreamAsync(type, readStream, content, formatterLogger, CancellationToken.None);
    }

    public override async Task<object> ReadFromStreamAsync(Type type, Stream readStream, HttpContent content, IFormatterLogger formatterLogger, CancellationToken cancellationToken)
    {
        using (var streamReader = new StreamReader(readStream))
        {
            return await streamReader.ReadToEndAsync();
        }
    }

    public override bool CanReadType(Type type)
    {
        return type == typeof(string);
    }

    public override bool CanWriteType(Type type)
    {
        return false;
    }
}

Finally you have to assign this to the HttpMethodContext.ResponseFormatter property.

I figured it out from the PostgreSQL docs, the exact syntax is:

ALTER TABLE the_table ADD CONSTRAINT constraint_name UNIQUE (thecolumn);

Thanks Fred.