If I understand your problem well you want the following things:

1. Have your media files stored in one single git repository, which is used by many projects
2. If you modify a media file in any of the projects in your local machine, it should immediately appear in every other project (so you don't want to commit+push+pull all the time)

Unfortunately there is no ultimate solution for what you want, but there are some things by which you can make your life easier.

First you should decide one important thing: do you want to store for every version in your project repository a reference to the version of the media files? So for example if you have a project called example.com, do you need know which style.css it used 2 weeks ago, or the latest is always (or mostly) the best?

If you don't need to know that, the solution is easy:

1. create a repository for the media files and one for each project
2. create a symbolic link in your projects which point to the locally cloned media repository. You can either create a relative symbolic link (e.g. ../media) and assume that everybody will checkout the project so that the media directory is in the same place, or write the name of the symbolic link into .gitignore, and everybody can decide where he/she puts the media files.

In most of the cases, however, you want to know this versioning information. In this case you have two choices:

1. Store every project in one big repository. The advantage of this solution is that you will have only 1 copy of the media repository. The big disadvantage is that it is much harder to switch between project versions (if you checkout to a different version you will always modify ALL projects)

2. Use submodules (as explained in answer 1). This way you will store the media files in one repository, and the projects will contain only a reference to a specific media repo version. But this way you will normally have many local copies of the media repository, and you cannot easily modify a media file in all projects.

If I were you I would probably choose the first or third solution (symbolic links or submodules). If you choose to use submodules you can still do a lot of things to make your life easier:

1. Before committing you can rename the submodule directory and put a symlink to a common media directory. When you're ready to commit, you can remove the symlink and remove the submodule back, and then commit.

2. You can add one of your copy of the media repository as a remote repository to all of your projects.

You can add local directories as a remote this way:

cd /my/project2/media
git remote add project1 /my/project1/media

If you modify a file in /my/project1/media, you can commit it and pull it from /my/project2/media without pushing it to a remote server:

cd /my/project1/media
git commit -a -m "message"
cd /my/project2/media
git pull project1 master

You are free to remove these commits later (with git reset) because you haven't shared them with other users.

git submodule update --recursive

You will also probably want to use the --init option which will make it initialize any uninitialized submodules:

git submodule update --init --recursive

Note: in some older versions of Git, if you use the --init option, already-initialized submodules may not be updated. In that case, you should also run the command without --init option.

Edit (2020.12.28): GitHub change default master branch to main branch since October 2020. See https://github.com/github/renaming

Update March 2013

Git 1.8.2 added the possibility to track branches.

"git submodule" started learning a new mode to integrate with the tip of the remote branch (as opposed to integrating with the commit recorded in the superproject's gitlink).

# add submodule to track master branch
git submodule add -b master [URL to Git repo];

# update your submodule
git submodule update --remote 

If you had a submodule already present you now wish would track a branch, see "how to make an existing submodule track a branch".

Also see Vogella's tutorial on submodules for general information on submodules.

Note:

git submodule add -b . [URL to Git repo];
                    ^^^

See git submodule man page:

A special value of . is used to indicate that the name of the branch in the submodule should be the same name as the current branch in the current repository.

See commit b928922727d6691a3bdc28160f93f25712c565f6:

submodule add: If --branch is given, record it in .gitmodules

This allows you to easily record a submodule.<name>.branch option in .gitmodules when you add a new submodule. With this patch,

$ git submodule add -b <branch> <repository> [<path>]
$ git config -f .gitmodules submodule.<path>.branch <branch>

reduces to

$ git submodule add -b <branch> <repository> [<path>]

This means that future calls to

$ git submodule update --remote ...

will get updates from the same branch that you used to initialize the submodule, which is usually what you want.

Signed-off-by: W. Trevor King [email protected]

Original answer (February 2012):

A submodule is a single commit referenced by a parent repo.
Since it is a Git repo on its own, the "history of all commits" is accessible through a git log within that submodule.

So for a parent to track automatically the latest commit of a given branch of a submodule, it would need to:

• cd in the submodule
• git fetch/pull to make sure it has the latest commits on the right branch
• cd back in the parent repo
• add and commit in order to record the new commit of the submodule.

gitslave (that you already looked at) seems to be the best fit, including for the commit operation.

It is a little annoying to make changes to the submodule due to the requirement to check out onto the correct submodule branch, make the change, commit, and then go into the superproject and commit the commit (or at least record the new location of the submodule).

Other alternatives are detailed here.

I am also still figuring out the internals of git, and have figured out this so far:

1. HEAD is a file in your .git/ directory that normally looks something like this:

% cat .git/HEAD
ref: refs/heads/master

2. refs/heads/master is itself a file that normally has the hash value of the latest commit:

% cat .git/refs/heads/master 
cbf01a8e629e8d884888f19ac203fa037acd901f

3. If you git checkout a remote branch that is ahead of your master, this may cause your HEAD file to be updated to contain the hash of the latest commit in the remote master:

% cat .git/HEAD
8e2c815f83231f85f067f19ed49723fd1dc023b7

This is called a detached HEAD. The remote master is ahead of your local master. When you do git submodule --remote myrepo to get the latest commit of your submodule, it will by default do a checkout, which will update HEAD. Since your current branch master is behind, HEAD becomes 'detached' from your current branch, so to speak.

• Remove the submodule from your .git/config
• Run git submodule init command
• Go to your submodule directory and run git pull origin master

It should works now

If the submodule was accidentally added because you added, committed and pushed a folder that was already a Git repository (contained .git), you won’t have a .gitmodules file to edit, or anything in .git/config. In this case all you need is :

git rm --cached subfolder
git add subfolder
git commit -m "Enter message here"
git push

FWIW, I also removed the .git folder before doing the git add.

A few of the other answers recommend merging/committing within the submodule's directory, which IMO can become a little messy.

Assuming the remote server is named origin and we want the master branch of the submodule(s), I tend to use:

git submodule foreach "git fetch && git reset --hard origin/master"

Note: This will perform a hard reset on each submodule -- if you don't want this, you can change --hard to --soft.

Git submodules are a little bit strange - they're always in "detached head" mode - they don't update to the latest commit on a branch like you might expect.

This does make some sense when you think about it, though. Let's say I create repository foo with submodule bar. I push my changes and tell you to check out commit a7402be from repository foo.

Then imagine that someone commits a change to repository bar before you can make your clone.

When you check out commit a7402be from repository foo, you expect to get the same code I pushed. That's why submodules don't update until you tell them to explicitly and then make a new commit.

Personally I think submodules are the most confusing part of Git. There are lots of places that can explain submodules better than I can. I recommend Pro Git by Scott Chacon.

Got help from this discussion. In my case the

git reset HEAD subby
git commit

worked for me :)

You can treat a submodule exactly like an ordinary repository. To propagate your changes upstream just commit and push as you would normally within that directory.

I just had the same problem. The reason was because there was a subfolder that contained a ".git" folder. Removing it made git happy.

In my case I wasn't sure what had caused this to happen, but I knew I just wanted the submodules to be reset to their latest remote commit and be done with it. This involved combining answers from a couple of different questions on here:

git submodule update --recursive --remote --init

Sources:

How do I revert my changes to a git submodule?

Easy way to pull latest of all git submodules

Step 1: Add the submodule

   git submodule add git://some_repository.git some_repository

Step 2: Fix the submodule to a particular commit

By default the new submodule will be tracking HEAD of the master branch, but it will NOT be updated as you update your primary repository. In order to change the submodule to track a particular commit or different branch, change directory to the submodule folder and switch branches just like you would in a normal repository.

   git checkout -b some_branch origin/some_branch

Now the submodule is fixed on the development branch instead of HEAD of master.

From Two Guys Arguing — Tie Git Submodules to a Particular Commit or Branch .

As it may happens that the default branch of your submodules is not master, this is how I automate the full Git submodules upgrades:

git submodule init
git submodule update
git submodule foreach 'git fetch origin; git checkout $(git rev-parse --abbrev-ref HEAD); git reset --hard origin/$(git rev-parse --abbrev-ref HEAD); git submodule update --recursive; git clean -dfx'

Use:

$ git submodule

It will list all the submodules in the specified Git repository.

I had a similar issue, but had painted myself into a corner with GUI tools.

I had a subproject with a few files in it that I had so far just copied around instead of checking into their own git repo. I created a repo in the subfolder, was able to commit, push, etc just fine. But in the parent repo the subfolder wasn't treated as a submodule, and its files were still being tracked by the parent repo - no good.

To get out of this mess I had to tell Git to stop tracking the subfolder (without deleting the files):

proj> git rm -r --cached ./ui/jslib

Then I had to tell it there was a submodule there (which you can't do if anything there is currently being tracked by git):

proj> git submodule add ./ui/jslib

Update

The ideal way to handle this involves a couple more steps. Ideally, the existing repo is moved out to its own directory, free of any parent git modules, committed and pushed, and then added as a submodule like:

proj> git submodule add [email protected]:user/jslib.git ui/jslib

That will clone the git repo in as a submodule - which involves the standard cloning steps, but also several other more obscure config steps that git takes on your behalf to get that submodule to work. The most important difference is that it places a simple .git file there, instead of a .git directory, which contains a path reference to where the real git dir lives - generally at parent project root .git/modules/jslib.

If you don't do things this way they'll work fine for you, but as soon as you commit and push the parent, and another dev goes to pull that parent, you just made their life a lot harder. It will be very difficult for them to replicate the structure you have on your machine so long as you have a full .git dir in a subfolder of a dir that contains its own .git dir.

So, move, push, git add submodule, is the cleanest option.

In simple terms, you just need to edit the .gitmodules file, then resync and update:

Edit the file, either via a git command or directly:

git config --file=.gitmodules -e

or just:

vim .gitmodules

then resync and update:

git submodule sync
git submodule update --init --recursive --remote

Try this.

git clone -b <branch_name> --recursive <remote> <directory>

If you have added the submodule in a branch make sure that you add it to the clone command.

in the file .gitmodules, I replaced string

"path = thirdsrc\boost" 

with

"path = thirdsrc/boost", 

and it solved! - -

For git <= 2.13 these two commands combined should reset your repos with recursive submodules:

git submodule foreach --recursive git reset --hard
git submodule update --recursive --init

A submodule is nothing but a clone of a git repo within another repo with some extra meta data (gitlink tree entry, .gitmodules file )

$ cd your_submodule
$ git checkout master
<hack,edit>
$ git commit -a -m "commit in submodule"
$ git push
$ cd ..
$ git add your_submodule
$ git commit -m "Updated submodule"

Your main project points to a particular commit that the submodule should be at. git submodule update tries to check out that commit in each submodule that has been initialized. The submodule is really an independent repository - just creating a new commit in the submodule and pushing that isn't enough. You also need to explicitly add the new version of the submodule in the main project.

So, in your case, you should find the right commit in the submodule - let's assume that's the tip of master:

cd mod
git checkout master
git pull origin master

Now go back to the main project, stage the submodule and commit that:

cd ..
git add mod
git commit -m "Updating the submodule 'mod' to the latest version"

Now push your new version of the main project:

git push origin master

From this point on, if anyone else updates their main project, then git submodule update for them will update the submodule, assuming it's been initialized.

On Windows, if you don't want to put your password in .gitconfig in the plain text, you can use

• Cntml (http://cntlm.sourceforge.net/)

It authenticates you against normal or even Windows NTLM proxy and starts localhost-proxy without authentication.

In order to get it run:

• Install Cntml
• Configure Cntml according to documentation to pass your proxy authentication

• Point git to your new localhost proxy:

  [http]
      proxy = http://localhost:3128       # change port as necessary
  

Assuming the submodule's repository does contain a commit you want to use (unlike the commit that is referenced from current state of the super-project), there are two ways to do it.

The first requires you to already know the commit from the submodule that you want to use. It works from the “inside, out” by directly adjusting the submodule then updating the super-project. The second works from the “outside, in” by finding the super-project's commit that modified the submodule and then reseting the super-project's index to refer to a different submodule commit.

Inside, Out

If you already know which commit you want the submodule to use, cd to the submodule, check out the commit you want, then git add and git commit it back in the super-project.

Example:

$ git submodule update
fatal: reference is not a tree: e47c0a16d5909d8cb3db47c81896b8b885ae1556
Unable to checkout 'e47c0a16d5909d8cb3db47c81896b8b885ae1556' in submodule path 'sub'

Oops, someone made a super-project commit that refers to an unpublished commit in the submodule sub. Somehow, we already know that we want the submodule to be at commit 5d5a3ee314476701a20f2c6ec4a53f88d651df6c. Go there and check it out directly.

Checkout in the Submodule

$ cd sub
$ git checkout 5d5a3ee314476701a20f2c6ec4a53f88d651df6c
Note: moving to '5d5a3ee314476701a20f2c6ec4a53f88d651df6c' which isn't a local branch
If you want to create a new branch from this checkout, you may do so
(now or later) by using -b with the checkout command again. Example:
  git checkout -b <new_branch_name>
HEAD is now at 5d5a3ee... quux
$ cd ..

Since we are checking out a commit, this produces a detached HEAD in the submodule. If you want to make sure that the submodule is using a branch, then use git checkout -b newbranch <commit> to create and checkout a branch at the commit or checkout the branch that you want (e.g. one with the desired commit at the tip).

Update the Super-project

A checkout in the submodule is reflected in the super-project as a change to the working tree. So we need to stage the change in the super-project's index and verify the results.

$ git add sub

Check the Results

$ git submodule update
$ git diff
$ git diff --cached
diff --git c/sub i/sub
index e47c0a1..5d5a3ee 160000
--- c/sub
+++ i/sub
@@ -1 +1 @@
-Subproject commit e47c0a16d5909d8cb3db47c81896b8b885ae1556
+Subproject commit 5d5a3ee314476701a20f2c6ec4a53f88d651df6c

The submodule update was silent because the submodule is already at the specified commit. The first diff shows that the index and worktree are the same. The third diff shows that the only staged change is moving the sub submodule to a different commit.

Commit

git commit

This commits the fixed-up submodule entry.

Outside, In

If you are not sure which commit you should use from the submodule, you can look at the history in the superproject to guide you. You can also manage the reset directly from the super-project.

$ git submodule update
fatal: reference is not a tree: e47c0a16d5909d8cb3db47c81896b8b885ae1556
Unable to checkout 'e47c0a16d5909d8cb3db47c81896b8b885ae1556' in submodule path 'sub'

This is the same situation as above. But this time we will focus on fixing it from the super-project instead of dipping into the submodule.

Find the Super-project's Errant Commit

$ git log --oneline -p -- sub
ce5d37c local change in sub
diff --git a/sub b/sub
index 5d5a3ee..e47c0a1 160000
--- a/sub
+++ b/sub
@@ -1 +1 @@
-Subproject commit 5d5a3ee314476701a20f2c6ec4a53f88d651df6c
+Subproject commit e47c0a16d5909d8cb3db47c81896b8b885ae1556
bca4663 added sub
diff --git a/sub b/sub
new file mode 160000
index 0000000..5d5a3ee
--- /dev/null
+++ b/sub
@@ -0,0 +1 @@
+Subproject commit 5d5a3ee314476701a20f2c6ec4a53f88d651df6c

OK, it looks like it went bad in ce5d37c, so we will restore the submodule from its parent (ce5d37c~).

Alternatively, you can take the submodule's commit from the patch text (5d5a3ee314476701a20f2c6ec4a53f88d651df6c) and use the above “inside, out” process instead.

Checkout in the Super-project

$ git checkout ce5d37c~ -- sub

This reset the submodule entry for sub to what it was at commit ce5d37c~ in the super-project.

Update the Submodule

$ git submodule update
Submodule path 'sub': checked out '5d5a3ee314476701a20f2c6ec4a53f88d651df6c'

The submodule update went OK (it indicates a detached HEAD).

Check the Results

$ git diff ce5d37c~ -- sub
$ git diff
$ git diff --cached
diff --git c/sub i/sub
index e47c0a1..5d5a3ee 160000
--- c/sub
+++ i/sub
@@ -1 +1 @@
-Subproject commit e47c0a16d5909d8cb3db47c81896b8b885ae1556
+Subproject commit 5d5a3ee314476701a20f2c6ec4a53f88d651df6c

The first diff shows that sub is now the same in ce5d37c~. The second diff shows that the index and worktree are the same. The third diff shows the only staged change is moving the sub submodule to a different commit.

Commit

git commit

This commits the fixed-up submodule entry.

Git 1.8.2 features a new option ,--remote, that will enable exactly this behavior. Running

git submodule update --rebase --remote

will fetch the latest changes from upstream in each submodule, rebase them, and check out the latest revision of the submodule. As the documentation puts it:

--remote

This option is only valid for the update command. Instead of using the superproject’s recorded SHA-1 to update the submodule, use the status of the submodule’s remote-tracking branch.

This is equivalent to running git pull in each submodule, which is generally exactly what you want.

(This was copied from this answer.)

Just use the shell script git-submodule-move.

I'm afraid there's not enough information in your question to be certain about what's going on, since you haven't replied to my follow-up question, but this may be of help in any case.

That error means that projectfolder is already staged ("already exists in the index"). To find out what's going on here, try to list everything in the index under that folder with:

git ls-files --stage projectfolder

The first column of that output will tell you what type of object is in the index at projectfolder. (These look like Unix filemodes, but have special meanings in git.)

I suspect that you will see something like:

160000 d00cf29f23627fc54eb992dde6a79112677cd86c 0   projectfolder

(i.e. a line beginning with 160000), in which case the repository in projectfolder has already been added as a "gitlink". If it doesn't appear in the output of git submodule, and you want to re-add it as a submodule, you can do:

git rm --cached projectfolder

... to unstage it, and then:

git submodule add url_to_repo projectfolder

... to add the repository as a submodule.

However, it's also possible that you will see many blobs listed (with file modes 100644 and 100755), which would suggest to me that you didn't properly unstage the files in projectfolder before copying the new repository into place. If that's the case, you can do the following to unstage all of those files:

git rm -r --cached projectfolder

... and then add the submodule with:

git submodule add url_to_repo projectfolder

If both application have the same signature (meaning that both APPS are yours and signed with the same key), you can call your other app activity as follows:

Intent LaunchIntent = getActivity().getPackageManager().getLaunchIntentForPackage(CALC_PACKAGE_NAME);
startActivity(LaunchIntent);

Hope it helps.

Assuming that you have your data in a 2d array, this should work:

import numpy
import pylab
xy = numpy.zeros((2, 1000))
xy[0] = range(1000)
xy[1] = range(1000)
colors = [int(i % 23) for i in xy[0]]
pylab.scatter(xy[0], xy[1], c=colors)
pylab.show()

You can also set a cmap attribute to control which colors will appear through use of a colormap; i.e. replace the pylab.scatter line with:

pylab.scatter(xy[0], xy[1], c=colors, cmap=pylab.cm.cool)

A list of color maps can be found here

You're going to have to use VBA, then. You'll iterate over the cells in your range, test the condition, and delete the contents if they match.

Something like:

For Each cell in SomeRange
  If (cell.value = SomeTest) Then cell.ClearContents
Next

This will work, Try this -

<input id="textField1" onfocus="this.select()" onmouseup="return false" /> 

Works in Safari/IE 9 and Chrome, I did not get a chance to test in Firefox though.

For those struggling through this using macOS, first install all the tools:

 brew install tree findutils rename

Then when needed to rename, make an alias for GNU find (gfind) as find. Then run the code of @Michel Krelin:

alias find=gfind 
find . -depth -name '* *' \
| while IFS= read -r f ; do mv -i "$f" "$(dirname "$f")/$(basename "$f"|tr ' ' _)" ; done   

Before understanding next, you need to have a little idea of Request-Response cycle in node though not much in detail. It starts with you making an HTTP request for a particular resource and it ends when you send a response back to the user i.e. when you encounter something like res.send(‘Hello World’);

let’s have a look at a very simple example.

app.get('/hello', function (req, res, next) {
  res.send('USER')
})

Here we do not need next(), because resp.send will end the cycle and hand over the control back to the route middleware.

Now let’s take a look at another example.

app.get('/hello', function (req, res, next) {
  res.send("Hello World !!!!");
});

app.get('/hello', function (req, res, next) {
  res.send("Hello Planet !!!!");
});

Here we have 2 middleware functions for the same path. But you always gonna get the response from the first one. Because that is mounted first in the middleware stack and res.send will end the cycle.

But what if we always do not want the “Hello World !!!!” response back. For some conditions we may want the "Hello Planet !!!!" response. Let’s modify the above code and see what happens.

app.get('/hello', function (req, res, next) {
  if(some condition){
    next();
    return;
  }
  res.send("Hello World !!!!");  
});

app.get('/hello', function (req, res, next) {
  res.send("Hello Planet !!!!");
});

What’s the next doing here. And yes you might have gusses. It’s gonna skip the first middleware function if the condition is true and invoke the next middleware function and you will have the "Hello Planet !!!!" response.

So, next pass the control to the next function in the middleware stack.

What if the first middleware function does not send back any response but do execute a piece of logic and then you get the response back from second middleware function.

Something like below:-

app.get('/hello', function (req, res, next) {
  // Your piece of logic
  next();
});

app.get('/hello', function (req, res, next) {
  res.send("Hello !!!!");
});

In this case you need both the middleware functions to be invoked. So, the only way you reach the second middleware function is by calling next();

What if you do not make a call to next. Do not expect the second middleware function to get invoked automatically. After invoking the first function your request will be left hanging. The second function will never get invoked and you will not get back the response.

This is probably what you wanted:

$('#elem').fadeTo('slow', 0.3, function()
{
    $(this).css('background-image', 'url(' + $img + ')');
}).fadeTo('slow', 1);

With a 1 second delay:

$('#elem').fadeTo('slow', 0.3, function()
{
    $(this).css('background-image', 'url(' + $img + ')');
}).delay(1000).fadeTo('slow', 1);

As the error message says, you have an inline style, which CSP prohibits. I see at least one (list-style: none) in your HTML. Put that style in your CSS file instead.

To explain further, Content Security Policy does not allow inline CSS because it could be dangerous. From An Introduction to Content Security Policy:

"If an attacker can inject a script tag that directly contains some malicious payload .. the browser has no mechanism by which to distinguish it from a legitimate inline script tag. CSP solves this problem by banning inline script entirely: it’s the only way to be sure."

This is how I have done in Swift 3.0. I created UIView extension and calling the self.view.showToast(message: "Message Here", duration: 3.0) and self.view.hideToast()

extension UIView{
var showToastTag :Int {return 999}

//Generic Show toast
func showToast(message : String, duration:TimeInterval) {

    let toastLabel = UILabel(frame: CGRect(x:0, y:0, width: (self.frame.size.width)-60, height:64))

    toastLabel.backgroundColor = UIColor.gray
    toastLabel.textColor = UIColor.black
    toastLabel.numberOfLines = 0
    toastLabel.layer.borderColor = UIColor.lightGray.cgColor
    toastLabel.layer.borderWidth = 1.0
    toastLabel.textAlignment = .center;
    toastLabel.font = UIFont(name: "HelveticaNeue", size: 17.0)
    toastLabel.text = message
    toastLabel.center = self.center
    toastLabel.isEnabled = true
    toastLabel.alpha = 0.99
    toastLabel.tag = showToastTag
    toastLabel.layer.cornerRadius = 10;
    toastLabel.clipsToBounds  =  true
    self.addSubview(toastLabel)

    UIView.animate(withDuration: duration, delay: 0.1, options: .curveEaseOut, animations: {
        toastLabel.alpha = 0.95
    }, completion: {(isCompleted) in
        toastLabel.removeFromSuperview()
    })
}

//Generic Hide toast
func hideToast(){
    if let view = self.viewWithTag(self.showToastTag){
        view.removeFromSuperview()
    }
  }
}

df[sapply(df, function(x) all(is.na(x)))] <- NULL

Try this instead in the end:

exec (@query)

If you do not have the brackets, SQL Server assumes the value of the variable to be a stored procedure name.

OR

EXECUTE sp_executesql @query

And it should not be because of FULL JOIN.
But I hope you have already created the temp tables: #TrafficFinal, #TrafficFinal2, #TrafficFinal3 before this.

Please note that there are performance considerations between using EXEC and sp_executesql. Because sp_executesql uses forced statement caching like an sp.
More details here.

On another note, is there a reason why you are using dynamic sql for this case, when you can use the query as is, considering you are not doing any query manipulations and executing it the way it is?

This is documented on the doxygen website, but to summarize here:

You can use doxygen to document your Python code. You can either use the Python documentation string syntax:

"""@package docstring
Documentation for this module.

More details.
"""

def func():
    """Documentation for a function.

    More details.
    """
    pass

In which case the comments will be extracted by doxygen, but you won't be able to use any of the special doxygen commands.

Or you can (similar to C-style languages under doxygen) double up the comment marker (#) on the first line before the member:

## @package pyexample
#  Documentation for this module.
#
#  More details.

## Documentation for a function.
#
#  More details.
def func():
    pass

In that case, you can use the special doxygen commands. There's no particular Python output mode, but you can apparently improve the results by setting OPTMIZE_OUTPUT_JAVA to YES.

Honestly, I'm a little surprised at the difference - it seems like once doxygen can detect the comments in ## blocks or """ blocks, most of the work would be done and you'd be able to use the special commands in either case. Maybe they expect people using """ to adhere to more Pythonic documentation practices and that would interfere with the special doxygen commands?

First off:

public class ProfileCollection implements Iterable<Profile> {

Second:

return m_Profiles.get(m_ActiveProfile);

#include <iostream>
using namespace std;
class matrix
{
    int a[10][10],b[10][10],c[10][10],x,y,i,j;
    public :
        void degerler();
        void ters();
};
void matrix::degerler()
{
    cout << "Satirlari giriniz: "; cin >> x;
    cout << "Sütunlari giriniz: "; cin >> y;
    cout << "Ilk matris elamanlarini giriniz:\n\n";
    for (i=1; i<=x; i++)
    {
        for (j=1; j<=y; j++)
        {
            cin >> a[i][j];
        }
    }
    cout << "Ikinci matris elamanlarini giriniz:\n\n";
    for (i=1; i<=x; i++)
    {
        for (j=1; j<=y; j++)
        {
            cin >> b[i][j];
        }
    }
}

void matrix::ters()
{
    cout << "matrisin tersi\n";
    for (i=1; i<=x; i++)
    {
        for (j=1; j<=y; j++)
        {
    if(i==j)
    {
    b[i][j]=1;
    }
    else
    b[i][j]=0;
    }
}
float d,k;
    for (i=1; i<=x; i++)
    {
    d=a[i][j];
        for (j=1; j<=y; j++)
        {
    a[i][j]=a[i][j]/d;
            b[i][j]=b[i][j]/d;
    }
        for (int h=0; h<x; h++)
        {
            if(h!=i)
    {
       k=a[h][j];
               for (j=1; j<=y; j++)
               {
                    a[h][j]=a[h][j]-(a[i][j]*k);
                    b[h][j]=b[h][j]-(b[i][j]*k);
               }
    }
    count << a[i][j] << "";
    }
    count << endl;
}  
}
int main()
{
    int secim;
    char ch;    
    matrix m;
    m.degerler();
    do
     {
    cout << "seçiminizi giriniz\n";
    cout << " 1. matrisin tersi\n";
    cin >> secim;
    switch (secim)
    {
        case 1:
            m.ters();
            break;
    }
    cout << "\nBaska bir sey yap/n?";
    cin >> ch;
    }
    while (ch!= 'n');
    cout << "\n";
    return 0;
}

If you can't just use filter join but need to perform some operations on the array's entry:

{% for entry in array %}
User {{ entry.attribute1 }} has id {{ entry.attribute2 }}
{% if not loop.last %}, {% endif %}
{% endfor %}

You can use os.listdir() to get the files in the source directory, os.path.isfile() to see if they are regular files (including symbolic links on *nix systems), and shutil.copy to do the copying.

The following code copies only the regular files from the source directory into the destination directory (I'm assuming you don't want any sub-directories copied).

import os
import shutil
src_files = os.listdir(src)
for file_name in src_files:
    full_file_name = os.path.join(src, file_name)
    if os.path.isfile(full_file_name):
        shutil.copy(full_file_name, dest)

Do this for a cool border and font effect:

#ck-button:hover {             /*ADD :hover */
    margin:4px;
    background-color:#EFEFEF;
    border-radius:4px;
    border:1px solid red;      /*change border color*/ 
    overflow:auto;
    float:left;
    color:red;                 /*add font color*/
}

Example: http://jsfiddle.net/zAFND/6/

querySelector and querySelectorAll are a relatively new APIs, whereas getElementById and getElementsByClassName have been with us for a lot longer. That means that what you use will mostly depend on which browsers you need to support.

As for the :, it has a special meaning so you have to escape it if you have to use it as a part of a ID/class name.

Swift 3.0

if let index = array.index(where: { $0.name == "Foo" }) {
    return array[index]
}

Swift 2.1

Filtering in object properties is now supported in swift 2.1. You can filter your array based on any value of the struct or class here is an example

for myObj in myObjList where myObj.name == "foo" {
 //object with name is foo
}

OR

for myObj in myObjList where myObj.Id > 10 {
 //objects with Id is greater than 10
}

I'd recommend that you take a look at java.util.ResourceBundle. You should care about I18N, but it's worth it even if you don't. Externalizing the messages is a very good idea. I've found that it was useful to be able to give a spreadsheet to business folks that allowed them to put in the exact language they wanted to see. We wrote an Ant task to generate the .properties files at compile time. It makes I18N trivial.

If you're also using Spring, so much the better. Their MessageSource class is useful for these sorts of things.

I'm no c++ guy, but you should be able to get the gist from this.

public static string Reverse(string s) {
    if (s == null || s.Length < 2) {
        return s;
    }

    int length = s.Length;
    int loop = (length >> 1) + 1;
    int j;
    char[] chars = new char[length];
    for (int i = 0; i < loop; i++) {
        j = length - i - 1;
        chars[i] = s[j];
        chars[j] = s[i];
    }
    return new string(chars);
}

You can go with @greenAfrican example, if it's possible for you to rewrite your function. But if you don't want to rewrite your function, you can wrap it into anonymous function inside apply, like this:

>>> def fxy(x, y):
...     return x * y

>>> df['newcolumn'] = df.apply(lambda x: fxy(x['A'], x['B']), axis=1)
>>> df
    A   B  newcolumn
0  10  20        200
1  20  30        600
2  30  10        300

var c = {'a':'A', 'b':'B', 'c':'C'};
var count = 0;
for (var i in c) {
   if (c.hasOwnProperty(i)) count++;
}

alert(count);

Also, instead of inner classes, you can use your 2 or more classes as fields.

For example:

Class Man{
private Phone ownPhone;
private DeviceInfo info;
//sets; gets
}
Class Phone{
private String phoneType;
private Long phoneNumber;
//sets; gets
}

Class DeviceInfo{

String phoneModel;
String cellPhoneOs;
String osVersion;
String phoneRam;
//sets; gets

}

So, here you have a man who can have some Phone with its number and type, also you have DeviceInfo for that Phone.

Also, it's possible is better to use DeviceInfo as a field into Phone class, like

class Phone {
DeviceInfo info;
String phoneNumber;
Stryng phoneType;
//sets; gets
}

One can also do this with a compact version of @TomAugspurger's answer, like so:

df = df1.merge(df2, how='left', on=['Year', 'Week', 'Colour']).merge(df3[['Week', 'Colour', 'Val3']], how='left', on=['Week', 'Colour'])

Check JavaScript Cookies on W3Schools.com for setting and getting cookie values via JS.

Just use the setCookie and getCookie methods mentioned there.

So, the code will look something like:

<script>
function setCookie(c_name, value, exdays) {
    var exdate = new Date();
    exdate.setDate(exdate.getDate() + exdays);
    var c_value = escape(value) + ((exdays == null) ? "" : "; expires=" + exdate.toUTCString());
    document.cookie = c_name + "=" + c_value;
}

function getCookie(c_name) {
    var i, x, y, ARRcookies = document.cookie.split(";");
    for (i = 0; i < ARRcookies.length; i++) {
        x = ARRcookies[i].substr(0, ARRcookies[i].indexOf("="));
        y = ARRcookies[i].substr(ARRcookies[i].indexOf("=") + 1);
        x = x.replace(/^\s+|\s+$/g, "");
        if (x == c_name) {
            return unescape(y);
        }
    }
}

function cssSelected() {
    var cssSelected = $('#myList')[0].value;
    if (cssSelected !== "select") {
        setCookie("selectedCSS", cssSelected, 3);
    }
}

$(document).ready(function() {
    $('#myList')[0].value = getCookie("selectedCSS");
})
</script>
<select id="myList" onchange="cssSelected();">
    <option value="select">--Select--</option>
    <option value="style-1.css">CSS1</option>
    <option value="style-2.css">CSS2</option>
    <option value="style-3.css">CSS3</option>
    <option value="style-4.css">CSS4</option>
</select>

$(this.parentNode).addClass('newClass');

Everything before the A, B, C, etc.

That seems so simple I must be misinterpreting you. It's just

:%s/<.*>//

I don't really see a way to do this as-is. I think you might need to remove the overflow:hidden from div#1 and add another div within div#1 (ie as a sibling to div#2) to hold your unspecified 'content' and add the overflow:hidden to that instead. I don't think that overflow can be (or should be able to be) over-ridden.

don't they both keep a value for another request?

Yes they do, but when the first one is void, the second one returns and object:

public void Keep(string key)
{
    _retainedKeys.Add(key); // just adds the key to the collection for retention
}

public object Peek(string key)
{
    object value;
    _data.TryGetValue(key, out value);
    return value; // returns an object without marking it for deletion
}

I made quite easy, Django style JSP Template inheritance tag library. https://github.com/kwon37xi/jsp-template-inheritance

I think it make easy to manage layouts without learning curve.

example code :

base.jsp : layout

<%@page contentType="text/html; charset=UTF-8" %>
<%@ taglib uri="http://kwonnam.pe.kr/jsp/template-inheritance" prefix="layout"%>
<!DOCTYPE html>
<html lang="en">
    <head>
        <title>JSP Template Inheritance</title>
    </head>

<h1>Head</h1>
<div>
    <layout:block name="header">
        header
    </layout:block>
</div>

<h1>Contents</h1>
<div>
    <p>
    <layout:block name="contents">
        <h2>Contents will be placed under this h2</h2>
    </layout:block>
    </p>
</div>

<div class="footer">
    <hr />
    <a href="https://github.com/kwon37xi/jsp-template-inheritance">jsp template inheritance example</a>
</div>
</html>

view.jsp : contents

<%@page contentType="text/html; charset=UTF-8" %>
<%@ taglib uri="http://kwonnam.pe.kr/jsp/template-inheritance" prefix="layout"%>
<layout:extends name="base.jsp">
    <layout:put name="header" type="REPLACE">
        <h2>This is an example about layout management with JSP Template Inheritance</h2>
    </layout:put>
    <layout:put name="contents">
        Lorem ipsum dolor sit amet, consectetur adipiscing elit. Proin porta,
        augue ut ornare sagittis, diam libero facilisis augue, quis accumsan enim velit a mauris.
    </layout:put>
</layout:extends>

For-loops:

For-loop in C:

for(int x = 0; x<=3; x++)
{
    //Do something!
}

The same loop in 8086 assembler:

        xor cx,cx   ; cx-register is the counter, set to 0
loop1   nop         ; Whatever you wanna do goes here, should not change cx
        inc cx      ; Increment
        cmp cx,3    ; Compare cx to the limit
        jle loop1   ; Loop while less or equal

That is the loop if you need to access your index (cx). If you just wanna to something 0-3=4 times but you do not need the index, this would be easier:

        mov cx,4    ; 4 iterations
loop1   nop         ; Whatever you wanna do goes here, should not change cx
        loop loop1  ; loop instruction decrements cx and jumps to label if not 0

If you just want to perform a very simple instruction a constant amount of times, you could also use an assembler-directive which will just hardcore that instruction

times 4 nop

Do-while-loops

Do-while-loop in C:

int x=1;
do{
    //Do something!
}
while(x==1)

The same loop in assembler:

        mov ax,1
loop1   nop         ; Whatever you wanna do goes here
        cmp ax,1    ; Check wether cx is 1
        je loop1    ; And loop if equal

While-loops

While-loop in C:

while(x==1){
    //Do something
}

The same loop in assembler:

        jmp loop1   ; Jump to condition first
cloop1  nop         ; Execute the content of the loop
loop1   cmp ax,1    ; Check the condition
        je cloop1   ; Jump to content of the loop if met

For the for-loops you should take the cx-register because it is pretty much standard. For the other loop conditions you can take a register of your liking. Of course replace the no-operation instruction with all the instructions you wanna perform in the loop.

<form name="add" method="post">
     <p>Age:</p>
     <select name="age">
        <option value="1_sre">23</option>
        <option value="2_sam">24</option>
        <option value="5_john">25</option>
     </select>
     <input type="submit" name="submit"/>
</form>

You will have the selected value in $_POST['age'], e.g. 1_sre. Then you will be able to split the value and get the 'stud_name'.

$stud = explode("_",$_POST['age']);
$stud_id = $stud[0];
$stud_name = $stud[1];

you can't really know if the user clicked the print of cancel button because they both fire the same event onafterprint or afterprint which I think is very stupid, why not differentiating between the two events ??

Consider thttpd. It can run under windows.

Quoting wikipedia:

"it is uniquely suited to service high volume requests for static data"

A version of thttpd-2.25b compiled under cygwin with cygwin dll's is available. It is single threaded and particularly good for servicing images.

I've found that using a simple for loop, iterating over all elements in the string and comparing using charAt performs faster than indexOf or Regex. The code and proof is available at JSPerf.

ETA: indexOf and charAt both perform similarly terrible on Chrome Mobile according to Browser Scope data listed on jsperf.com

Using the jQuery Number Format plugin, you can get a formatted number in one of three ways:

// Return as a string
$.number( 1234.5678, 2 ); // Returns '1,234.57'

// Place formatted number directly in an element:
$('#mynum').number( 1234.5678 ); // #mynum would then contain '1,235'

// Replace existing number values in any element
$('span.num').number( true, 2 ); // Formats and replaces existing numbers in those elements.

If you don't like the format, or you need to localise, there are other parameters that let you choose how the number gets formatted:

.number( theNumber, decimalPlaces, decimalSeparator, thousandsSeparator )

You can also get jQuery Number Format from GitHub.

TRY THIS Button Border With Rounded Corners

anyButton.backgroundColor = .clear

anyButton.layer.cornerRadius = anyButton.frame.height / 2

anyButton.layer.borderWidth = 1

anyButton.layer.borderColor = UIColor.black.cgColor

Preface: This comment is intended to address the answer provided by okutane, but because of SO's silly reputation system, I can not post it where it belongs.

Your assertion that one is slower than the other because of the method calls isn't correct. One is slower than the other because of more complicated bounds-checking algorithms. You can easily verify this by looking, not at the IL, but at the compiled assembly. For example, on my 4.5 install, accessing an element (via pointer in edx) stored in a two-dimensional array pointed to by ecx with indexes stored in eax and edx looks like so:

sub eax,[ecx+10]
cmp eax,[ecx+08]
jae oops //jump to throw out of bounds exception
sub edx,[ecx+14]
cmp edx,[ecx+0C]
jae oops //jump to throw out of bounds exception
imul eax,[ecx+0C]
add eax,edx
lea edx,[ecx+eax*4+18]

Here, you can see that there's no overhead from method calls. The bounds checking is just very convoluted thanks to the possibility of non-zero indexes, which is a functionality not on offer with jagged arrays. If we remove the sub,cmp,and jmps for the non-zero cases, the code pretty much resolves to (x*y_max+y)*sizeof(ptr)+sizeof(array_header). This calculation is about as fast (one multiply could be replaced by a shift, since that's the whole reason we choose bytes to be sized as powers of two bits) as anything else for random access to an element.

Another complication is that there are plenty of cases where a modern compiler will optimize away the nested bounds-checking for element access while iterating over a single-dimension array. The result is code that basically just advances an index pointer over the contiguous memory of the array. Naive iteration over multi-dimensional arrays generally involves an extra layer of nested logic, so a compiler is less likely to optimize the operation. So, even though the bounds-checking overhead of accessing a single element amortizes out to constant runtime with respect to array dimensions and sizes, a simple test-case to measure the difference may take many times longer to execute.

Just use another container to wrap last two divs. Don't forget to use CSS prefixes.

#productShowcaseContainer {_x000D_
   display: flex;_x000D_
   flex-direction: column;_x000D_
   height: 600px;_x000D_
   width: 580px;_x000D_
   background-color: rgb(240, 240, 240);_x000D_
}_x000D_
_x000D_
#productShowcaseTitle {_x000D_
   height: 100px;_x000D_
   background-color: rgb(200, 200, 200);_x000D_
}_x000D_
_x000D_
#anotherContainer{_x000D_
   display: flex;_x000D_
   height: 100%;_x000D_
}_x000D_
_x000D_
#productShowcaseDetail {_x000D_
   background-color: red;_x000D_
   flex: 4;_x000D_
}_x000D_
_x000D_
#productShowcaseThumbnailContainer {_x000D_
   background-color: blue;_x000D_
   flex: 1;_x000D_
}

<div id="productShowcaseContainer">_x000D_
   <div id="productShowcaseTitle">1</div>_x000D_
   <div id="anotherContainer">_x000D_
      <div id="productShowcaseDetail">2</div>_x000D_
      <div id="productShowcaseThumbnailContainer">3</div>_x000D_
   </div>_x000D_
</div>

The negation pseudo-class seems to be what you are looking for.

table:not(.dojoxGrid) {color:red;}

It's not supported by = IE8 though.

I couldn't get any of these to work inside my placeholder attribute, so I used xml special character.

<input type="text" placeholder="fex: firstname&#64;lastname.com"/>

See more examples here. https://www.dvteclipse.com/documentation/svlinter/How_to_use_special_characters_in_XML.3F.html

From at least, the 2.0 version, Spring-Data-Jpa modified findOne().
Now, findOne() has neither the same signature nor the same behavior.
Previously, it was defined in the CrudRepository interface as:

T findOne(ID primaryKey);

Now, the single findOne() method that you will find in CrudRepository is the one defined in the QueryByExampleExecutor interface as:

<S extends T> Optional<S> findOne(Example<S> example);

That is implemented finally by SimpleJpaRepository, the default implementation of the CrudRepository interface.
This method is a query by example search and you don't want that as a replacement.

In fact, the method with the same behavior is still there in the new API, but the method name has changed.
It was renamed from findOne() to findById() in the CrudRepository interface :

Optional<T> findById(ID id); 

Now it returns an Optional, which is not so bad to prevent NullPointerException.

So, the actual method to invoke is now Optional<T> findById(ID id).

How to use that?
Learning Optional usage. Here's important information about its specification:

A container object which may or may not contain a non-null value. If a value is present, isPresent() will return true and get() will return the value.

Additional methods that depend on the presence or absence of a contained value are provided, such as orElse() (return a default value if value not present) and ifPresent() (execute a block of code if the value is present).

Some hints on how to use Optional with Optional<T> findById(ID id).

Generally, as you look for an entity by id, you want to return it or make a particular processing if that is not retrieved.

Here are three classical usage examples.

1. Suppose that if the entity is found you want to get it otherwise you want to get a default value.

You could write :

Foo foo = repository.findById(id)
                    .orElse(new Foo());

or get a null default value if it makes sense (same behavior as before the API change) :

Foo foo = repository.findById(id)
                    .orElse(null);

2. Suppose that if the entity is found you want to return it, else you want to throw an exception.

You could write :

return repository.findById(id)
        .orElseThrow(() -> new EntityNotFoundException(id));

3. Suppose you want to apply a different processing according to if the entity is found or not (without necessarily throwing an exception).

You could write :

Optional<Foo> fooOptional = fooRepository.findById(id);
if (fooOptional.isPresent()) {
    Foo foo = fooOptional.get();
    // processing with foo ...
} else {
    // alternative processing....
}

Robocopy is designed for reliable copying with many copy options, file selection restart, etc.

/xf to excludes files and /e for subdirectories:

robocopy $copyAdmin $AdminPath /e /xf "web.config" "Deploy"

Use HeidiSQL. Its free and a very good db tool.

From tools menu, enter Bulk table editor

Select the complete database or pick tables to convert,

• tick Change default collation: utf8mb4_general_ci
• tick Convert to charset: utf8

Execute

This converts complete database from latin to utf8 in just a few seconds.

Works like a charm :)

HeidiSQL connects by default as utf8 so any special characters should now be seen as the character (æ ø å) and not as encoded when inspecting the table data.

The real pitfall when moving from latin to utf8 is to make sure pdo connects with utf8 charset. If not you will get rubbish data inserted to the utf8 table and question marks all over the place on your web page, making you think the table data is not utf8...

You could utilize jQuery.filter() function to return elements from a subset of the matching elements.

var names = [_x000D_
    { name : "Joe", age:20, email: "[email protected]"},_x000D_
    { name : "Mike", age:50, email: "[email protected]"},_x000D_
    { name : "Joe", age:45, email: "[email protected]"}_x000D_
   ];_x000D_
   _x000D_
   _x000D_
var filteredNames = $(names).filter(function( idx ) {_x000D_
    return names[idx].name === "Joe" && names[idx].age < 30;_x000D_
}); _x000D_
_x000D_
$(filteredNames).each(function(){_x000D_
     $('#output').append(this.name);_x000D_
});

<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>_x000D_
_x000D_
<div id="output"/>

To get the value equivalent to your C cast, just bitwise and with the appropriate mask. e.g. if unsigned long is 32 bit:

>>> i = -6884376
>>> i & 0xffffffff
4288082920

or if it is 64 bit:

>>> i & 0xffffffffffffffff
18446744073702667240

Do be aware though that although that gives you the value you would have in C, it is still a signed value, so any subsequent calculations may give a negative result and you'll have to continue to apply the mask to simulate a 32 or 64 bit calculation.

This works because although Python looks like it stores all numbers as sign and magnitude, the bitwise operations are defined as working on two's complement values. C stores integers in twos complement but with a fixed number of bits. Python bitwise operators act on twos complement values but as though they had an infinite number of bits: for positive numbers they extend leftwards to infinity with zeros, but negative numbers extend left with ones. The & operator will change that leftward string of ones into zeros and leave you with just the bits that would have fit into the C value.

Displaying the values in hex may make this clearer (and I rewrote to string of f's as an expression to show we are interested in either 32 or 64 bits):

>>> hex(i)
'-0x690c18'
>>> hex (i & ((1 << 32) - 1))
'0xff96f3e8'
>>> hex (i & ((1 << 64) - 1)
'0xffffffffff96f3e8L'

For a 32 bit value in C, positive numbers go up to 2147483647 (0x7fffffff), and negative numbers have the top bit set going from -1 (0xffffffff) down to -2147483648 (0x80000000). For values that fit entirely in the mask, we can reverse the process in Python by using a smaller mask to remove the sign bit and then subtracting the sign bit:

>>> u = i & ((1 << 32) - 1)
>>> (u & ((1 << 31) - 1)) - (u & (1 << 31))
-6884376

Or for the 64 bit version:

>>> u = 18446744073702667240
>>> (u & ((1 << 63) - 1)) - (u & (1 << 63))
-6884376

This inverse process will leave the value unchanged if the sign bit is 0, but obviously it isn't a true inverse because if you started with a value that wouldn't fit within the mask size then those bits are gone.

Take a look at the server logs!

I had been with this for hours. The awful Tomcat servlet is not very helpful neither but if you can see the stacktrace that should be enough.

For instance, I read the following error message there:

As you can see, the message was pretty clear and easy to fix :-)

if you wish to use a button or some other event, just use this in JS:

document.querySelector("button").addEventListener("click", function() {
document.body.style.backgroundColor = "red";
});

You can just do:

@some_var.class == Hash

or also something like:

@some_var.is_a?(Hash)

It's worth noting that the "is_a?" method is true if the class is anywhere in the objects ancestry tree. for instance:

@some_var.is_a?(Object)  # => true

the above is true if @some_var is an instance of a hash or other class that stems from Object. So, if you want a strict match on the class type, using the == or instance_of? method is probably what you're looking for.

I like to use zip(*iterable) (which is the piece of code you're looking for) in my programs as so:

def unzip(iterable):
    return zip(*iterable)

I find unzip more readable.

Binary releases contain computer readable version of the application, meaning it is compiled. Source releases contain human readable version of the application, meaning it has to be compiled before it can be used.

You can use JavaScript Timing Events to call function after certain interval of time:

This shows the alert box after 3 seconds:

setInterval(function(){alert("Hello")},3000);

You can use two method of time event in javascript.i.e.

1. setInterval(): executes a function, over and over again, at specified time intervals
2. setTimeout() : executes a function, once, after waiting a specified number of milliseconds

Once you're logged in as postgres, you should be able to write:

psql -t -d database_name -c $'SELECT c_defaults FROM user_info WHERE c_uid = \'testuser\';'

to print out just the value of that field, which means that you can capture it to (for example) save in a Bash variable:

testuser_defaults="$(psql -t -d database_name -c $'SELECT c_defaults FROM user_info WHERE c_uid = \'testuser\';')"

To handle the logging in as postgres, I recommend using sudo. You can give a specific user the permission to run

sudo -u postgres /path/to/this/script.sh

so that they can run just the one script as postgres.

Try this,

get-music:
 rsync -avzru --delete-excluded server:/media/10001/music/ /media/Incoming/music/

put-music:
 rsync -avzru --delete-excluded /media/Incoming/music/ server:/media/10001/music/

sync-music: get-music put-music

I just test this and it worked for me. I'm doing a 2-way sync between Windows7 (using cygwin with the rsync package installed) and FreeNAS fileserver (FreeNAS runs on FreeBSD with rsync package pre-installed).

Apart from what Andy mentioned, there is another difference which could be important - write-host directly writes to the host and return nothing, meaning that you can't redirect the output, e.g., to a file.

---- script a.ps1 ----
write-host "hello"

Now run in PowerShell:

PS> .\a.ps1 > someFile.txt
hello
PS> type someFile.txt
PS>

As seen, you can't redirect them into a file. This maybe surprising for someone who are not careful.

But if switched to use write-output instead, you'll get redirection working as expected.

If you have an issue, you need to locate your pg_hba.conf. The command is:

find / -name 'pg_hba.conf' 2>/dev/null

and after that change the configuration file:

Postgresql 9.3

Postgresql 9.4

The next step is: Restarting your db instance:

service postgresql-9.3 restart

If you have any problems, you need to set password again:

ALTER USER db_user with password 'db_password';

You can also use something like

<c:if test="${ testObject.testPropert == "testValue" }">...</c:if>

string a = @"a\\b";
a = a.Replace(@"\\",@"\");

should work. Remember that in the watch Visual STudio show the "\" escaped so you see "\" in place of a single one.

I wrote my own script called 'pmerge' to partially merge directories. It's a work in progress and I'm still learning both Git and Bash scripting.

This command uses git merge --no-commit and then unapplies changes that don't match the path provided.

Usage: git pmerge branch path
Example: git merge develop src/

I haven't tested it extensively. The working directory should be free of any uncommitted changes and untracked files.

#!/bin/bash

E_BADARGS=65

if [ $# -ne 2 ]
then
    echo "Usage: `basename $0` branch path"
    exit $E_BADARGS
fi

git merge $1 --no-commit
IFS=$'\n'

# List of changes due to merge | replace nulls with newlines | strip lines to just filenames | ensure lines are unique
for f in $(git status --porcelain -z -uno | tr '\000' '\n' | sed -e 's/^[[:graph:]][[:space:]]\{1,\}//' | uniq); do
    [[ $f == $2* ]] && continue
    if git reset $f >/dev/null 2>&1; then
        # Reset failed... file was previously unversioned
        echo Deleting $f
        rm $f
    else
        echo Reverting $f
        git checkout -- $f >/dev/null 2>&1
    fi
done
unset IFS

Use malloc and free only for allocating memory that is going to be managed by c-centric libraries and APIs. Use new and delete (and the [] variants) for everything that you control.

Use strpos. If the string is not found it returns false, otherwise something that is not false. Be sure to use a type-safe comparison (===) as 0 may be returned and it is a falsy value:

if (strpos($string, $substring) === false) {
    // substring is not found in string
}

if (strpos($string, $substring2) !== false) {
    // substring2 is found in string
}

I have written a SQLite3 wrapper library written in Swift.

This is actually a very high level wrapper with very simple API, but anyway, it has low-level C inter-op code, and I post here a (simplified) part of it to shows the C inter-op.

    struct C
    {
        static let  NULL        =   COpaquePointer.null()
    }

    func open(filename:String, flags:OpenFlag)
    {
        let name2   =   filename.cStringUsingEncoding(NSUTF8StringEncoding)!
        let r       =   sqlite3_open_v2(name2, &_rawptr, flags.value, UnsafePointer<Int8>.null())
        checkNoErrorWith(resultCode: r)
    }

    func close()
    {   
        let r   =   sqlite3_close(_rawptr)
        checkNoErrorWith(resultCode: r)
        _rawptr =   C.NULL
    }

    func prepare(SQL:String) -> (statements:[Core.Statement], tail:String)
    {
        func once(zSql:UnsafePointer<Int8>, len:Int32, inout zTail:UnsafePointer<Int8>) -> Core.Statement?
        {
            var pStmt   =   C.NULL
            let r       =   sqlite3_prepare_v2(_rawptr, zSql, len, &pStmt, &zTail)
            checkNoErrorWith(resultCode: r)

            if pStmt == C.NULL
            {
                return  nil
            }
            return  Core.Statement(database: self, pointerToRawCStatementObject: pStmt)
        }

        var stmts:[Core.Statement]  =   []
        let sql2    =   SQL as NSString
        var zSql    =   UnsafePointer<Int8>(sql2.UTF8String)
        var zTail   =   UnsafePointer<Int8>.null()
        var len1    =   sql2.lengthOfBytesUsingEncoding(NSUTF8StringEncoding);
        var maxlen2 =   Int32(len1)+1

        while let one = once(zSql, maxlen2, &zTail)
        {
            stmts.append(one)
            zSql    =   zTail
        }

        let rest1   =   String.fromCString(zTail)
        let rest2   =   rest1 == nil ? "" : rest1!

        return  (stmts, rest2)
    }

    func step() -> Bool
    {   
        let rc1 =   sqlite3_step(_rawptr)

        switch rc1
        {   
            case SQLITE_ROW:
                return  true

            case SQLITE_DONE:
                return  false

            default:
                database.checkNoErrorWith(resultCode: rc1)
        }
    }

    func columnText(at index:Int32) -> String
    {
        let bc  =   sqlite3_column_bytes(_rawptr, Int32(index))
        let cs  =   sqlite3_column_text(_rawptr, Int32(index))

        let s1  =   bc == 0 ? "" : String.fromCString(UnsafePointer<CChar>(cs))!
        return  s1
    }

    func finalize()
    {
        let r   =   sqlite3_finalize(_rawptr)
        database.checkNoErrorWith(resultCode: r)

        _rawptr =   C.NULL
    }

If you want a full source code of this low level wrapper, see these files.

• https://github.com/Eonil/SQLite3/blob/master/Swift/Sources/Core.Statement.swift
• https://github.com/Eonil/SQLite3/blob/master/Swift/Sources/Core.Database.swift

length of an array(type int) with sizeof: sizeof(array)/sizeof(int)

There are two ways to do this. The System.Diagnostics.StackTrace() will give you a stack trace for the current thread. If you have a reference to a Thread instance, you can get the stack trace for that via the overloaded version of StackTrace().

You may also want to check out Stack Overflow question How to get non-current thread's stacktrace?.

Cong Ma does a good job of explaining what __getitem__ is used for - but I want to give you an example which might be useful. Imagine a class which models a building. Within the data for the building it includes a number of attributes, including descriptions of the companies that occupy each floor :

Without using __getitem__ we would have a class like this :

class Building(object):
     def __init__(self, floors):
         self._floors = [None]*floors
     def occupy(self, floor_number, data):
          self._floors[floor_number] = data
     def get_floor_data(self, floor_number):
          return self._floors[floor_number]

building1 = Building(4) # Construct a building with 4 floors
building1.occupy(0, 'Reception')
building1.occupy(1, 'ABC Corp')
building1.occupy(2, 'DEF Inc')
print( building1.get_floor_data(2) )

We could however use __getitem__ (and its counterpart __setitem__) to make the usage of the Building class 'nicer'.

class Building(object):
     def __init__(self, floors):
         self._floors = [None]*floors
     def __setitem__(self, floor_number, data):
          self._floors[floor_number] = data
     def __getitem__(self, floor_number):
          return self._floors[floor_number]

building1 = Building(4) # Construct a building with 4 floors
building1[0] = 'Reception'
building1[1] = 'ABC Corp'
building1[2] = 'DEF Inc'
print( building1[2] )

Whether you use __setitem__ like this really depends on how you plan to abstract your data - in this case we have decided to treat a building as a container of floors (and you could also implement an iterator for the Building, and maybe even the ability to slice - i.e. get more than one floor's data at a time - it depends on what you need.

The response by @Miknash and @wolfgang gutierrez barrera was helpful to me. Only difference was I had to add rgbValue: to the function call.

UIColorFromHex(rgbValue: 0xA6D632,alpha: 1 ) like so

You shouldn't have to make any changes to the certificate. Are you sure you are running the right import command?

The following works for me:

keytool -import -alias joe -file mycert.cer -keystore mycerts -storepass changeit

where mycert.cer contains:

-----BEGIN CERTIFICATE-----
MIIFUTCCBDmgAwIBAgIHK4FgDiVqczANBgkqhkiG9w0BAQUFADCByjELMAkGA1UE
BhMCVVMxEDAOBgNVBAgTB0FyaXpvbmExEzARBgNVBAcTClNjb3R0c2RhbGUxGjAY
...
RLJKd+SjxhLMD2pznKxC/Ztkkcoxaw9u0zVPOPrUtsE/X68Vmv6AEHJ+lWnUaWlf
zLpfMEvelFPYH4NT9mV5wuQ1Pgurf/ydBhPizc0uOCvd6UddJS5rPfVWnuFkgQOk
WmD+yvuojwsL38LPbtrC8SZgPKT3grnLwKu18nm3UN2isuciKPF2spNEFnmCUWDc
MMicbud3twMSO6Zbm3lx6CToNFzP
-----END CERTIFICATE-----

Updated: 15th June 2016 (as an ultimate solution currently)

Please note that I even give vote up for the one is top voted, but to make it clear these are the regexps actually works i tested it with thousands of real BIN codes. The most important is to use start strings (^) otherwise it will give false results in real world!

JCB ^(?:2131|1800|35)[0-9]{0,}$ Start with: 2131, 1800, 35 (3528-3589)

American Express ^3[47][0-9]{0,}$ Start with: 34, 37

Diners Club ^3(?:0[0-59]{1}|[689])[0-9]{0,}$ Start with: 300-305, 309, 36, 38-39

Visa ^4[0-9]{0,}$ Start with: 4

MasterCard ^(5[1-5]|222[1-9]|22[3-9]|2[3-6]|27[01]|2720)[0-9]{0,}$ Start with: 2221-2720, 51-55

Maestro ^(5[06789]|6)[0-9]{0,}$ Maestro always growing in the range: 60-69, started with / not something else, but starting 5 must be encoded as mastercard anyway. Maestro cards must be detected in the end of the code because some others has in the range of 60-69. Please look at the code.

Discover ^(6011|65|64[4-9]|62212[6-9]|6221[3-9]|622[2-8]|6229[01]|62292[0-5])[0-9]{0,}$ Discover quite difficult to code, start with: 6011, 622126-622925, 644-649, 65

In javascript I use this function. This is good when u assign it to an onkeyup event and it give result as soon as possible.

function cc_brand_id(cur_val) {
    // the regular expressions check for possible matches as you type, hence the OR operators based on the number of chars
    // regexp string length {0} provided for soonest detection of beginning of the card numbers this way it could be used for BIN CODE detection also

    //JCB
    jcb_regex = new RegExp('^(?:2131|1800|35)[0-9]{0,}$'); //2131, 1800, 35 (3528-3589)
    // American Express
    amex_regex = new RegExp('^3[47][0-9]{0,}$'); //34, 37
    // Diners Club
    diners_regex = new RegExp('^3(?:0[0-59]{1}|[689])[0-9]{0,}$'); //300-305, 309, 36, 38-39
    // Visa
    visa_regex = new RegExp('^4[0-9]{0,}$'); //4
    // MasterCard
    mastercard_regex = new RegExp('^(5[1-5]|222[1-9]|22[3-9]|2[3-6]|27[01]|2720)[0-9]{0,}$'); //2221-2720, 51-55
    maestro_regex = new RegExp('^(5[06789]|6)[0-9]{0,}$'); //always growing in the range: 60-69, started with / not something else, but starting 5 must be encoded as mastercard anyway
    //Discover
    discover_regex = new RegExp('^(6011|65|64[4-9]|62212[6-9]|6221[3-9]|622[2-8]|6229[01]|62292[0-5])[0-9]{0,}$');
    ////6011, 622126-622925, 644-649, 65


    // get rid of anything but numbers
    cur_val = cur_val.replace(/\D/g, '');

    // checks per each, as their could be multiple hits
    //fix: ordering matter in detection, otherwise can give false results in rare cases
    var sel_brand = "unknown";
    if (cur_val.match(jcb_regex)) {
        sel_brand = "jcb";
    } else if (cur_val.match(amex_regex)) {
        sel_brand = "amex";
    } else if (cur_val.match(diners_regex)) {
        sel_brand = "diners_club";
    } else if (cur_val.match(visa_regex)) {
        sel_brand = "visa";
    } else if (cur_val.match(mastercard_regex)) {
        sel_brand = "mastercard";
    } else if (cur_val.match(discover_regex)) {
        sel_brand = "discover";
    } else if (cur_val.match(maestro_regex)) {
        if (cur_val[0] == '5') { //started 5 must be mastercard
            sel_brand = "mastercard";
        } else {
            sel_brand = "maestro"; //maestro is all 60-69 which is not something else, thats why this condition in the end
        }
    }

    return sel_brand;
}

Here you can play with it:

http://jsfiddle.net/upN3L/69/

For PHP use this function, this detects some sub VISA/MC cards too:

/**
  * Obtain a brand constant from a PAN
  *
  * @param string $pan               Credit card number
  * @param bool   $include_sub_types Include detection of sub visa brands
  * @return string
  */
public static function getCardBrand($pan, $include_sub_types = false)
{
    //maximum length is not fixed now, there are growing number of CCs has more numbers in length, limiting can give false negatives atm

    //these regexps accept not whole cc numbers too
    //visa
    $visa_regex = "/^4[0-9]{0,}$/";
    $vpreca_regex = "/^428485[0-9]{0,}$/";
    $postepay_regex = "/^(402360|402361|403035|417631|529948){0,}$/";
    $cartasi_regex = "/^(432917|432930|453998)[0-9]{0,}$/";
    $entropay_regex = "/^(406742|410162|431380|459061|533844|522093)[0-9]{0,}$/";
    $o2money_regex = "/^(422793|475743)[0-9]{0,}$/";

    // MasterCard
    $mastercard_regex = "/^(5[1-5]|222[1-9]|22[3-9]|2[3-6]|27[01]|2720)[0-9]{0,}$/";
    $maestro_regex = "/^(5[06789]|6)[0-9]{0,}$/";
    $kukuruza_regex = "/^525477[0-9]{0,}$/";
    $yunacard_regex = "/^541275[0-9]{0,}$/";

    // American Express
    $amex_regex = "/^3[47][0-9]{0,}$/";

    // Diners Club
    $diners_regex = "/^3(?:0[0-59]{1}|[689])[0-9]{0,}$/";

    //Discover
    $discover_regex = "/^(6011|65|64[4-9]|62212[6-9]|6221[3-9]|622[2-8]|6229[01]|62292[0-5])[0-9]{0,}$/";

    //JCB
    $jcb_regex = "/^(?:2131|1800|35)[0-9]{0,}$/";

    //ordering matter in detection, otherwise can give false results in rare cases
    if (preg_match($jcb_regex, $pan)) {
        return "jcb";
    }

    if (preg_match($amex_regex, $pan)) {
        return "amex";
    }

    if (preg_match($diners_regex, $pan)) {
        return "diners_club";
    }

    //sub visa/mastercard cards
    if ($include_sub_types) {
        if (preg_match($vpreca_regex, $pan)) {
            return "v-preca";
        }
        if (preg_match($postepay_regex, $pan)) {
            return "postepay";
        }
        if (preg_match($cartasi_regex, $pan)) {
            return "cartasi";
        }
        if (preg_match($entropay_regex, $pan)) {
            return "entropay";
        }
        if (preg_match($o2money_regex, $pan)) {
            return "o2money";
        }
        if (preg_match($kukuruza_regex, $pan)) {
            return "kukuruza";
        }
        if (preg_match($yunacard_regex, $pan)) {
            return "yunacard";
        }
    }

    if (preg_match($visa_regex, $pan)) {
        return "visa";
    }

    if (preg_match($mastercard_regex, $pan)) {
        return "mastercard";
    }

    if (preg_match($discover_regex, $pan)) {
        return "discover";
    }

    if (preg_match($maestro_regex, $pan)) {
        if ($pan[0] == '5') { //started 5 must be mastercard
            return "mastercard";
        }
        return "maestro"; //maestro is all 60-69 which is not something else, thats why this condition in the end

    }

    return "unknown"; //unknown for this system
}

Try the following query

select * from table
where NOT (tester = 'username')

I had a similar problem recently, and needed to change the permissions of my vendor folder

By running following commands :

1. php artisan cache:clear
2. chmod -R 777 storage vendor
3. composer dump-autoload

I need to give all the permissions required to open and write vendor files to solve this issue

If DFS finds an edge that points to an already-visited vertex, you have a cycle there.

Sure things!

.img-responsive is the right way to make images responsive with bootstrap 3 You can add some height rule for the picture you want to make responsive, because with responsibility, width changes along the height, fix it and there you are.

Oracle SQL: Usable with any phone number length and can easily support localization.

CREATE TABLE digit_character_map (digit number(1), character varchar2(1));

SELECT replace(permutations,' ','') AS permutations
FROM (SELECT sys_connect_by_path(map.CHARACTER,' ') AS permutations, LEVEL AS lvl
      FROM digit_character_map map 
      START WITH map.digit = substr('12345',1,1)
      CONNECT BY   digit = substr('12345',LEVEL,1))
WHERE lvl = length('12345');

Using FQL you could do that:

http://graph.facebook.com/fql?q=SELECT url, total_count FROM link_stat WHERE url='PASTE_YOUR_URL_HERE'

Try this:

case $VAR in
normal)
    echo "This doesn't do fallthrough"
    ;;
special)
    echo -n "This does "
    ;&
fallthrough)
    echo "fall-through"
    ;;
esac

The default value parameter expansion is often useful in build scripts like the example one below. If the user just calls the script as-is, perl will not be built in. The user has to explicitly set WITH_PERL to a value other than "no" to have it built in.

$ cat defvar.sh
#!/bin/bash

WITH_PERL=${WITH_PERL:-no}

if [[ "$WITH_PERL" != no ]]; then
    echo "building with perl"
    # ./configure --enable=perl
else
    echo "not building with perl"
    # ./configure
fi

Build without Perl

$ ./defvar.sh
not building with perl

Build with Perl

$ WITH_PERL=yes ./defvar.sh
building with perl

Assuming you have a module file called Dummy-Name.psm1 which has a method called Function-Dumb()

Import-Module "Dummy-Name.psm1";
Get-Command -Module "Function-Dumb";
#
#
Function-Dumb;

I think you put the function in the $(document).ready....... The functions are always provided out the $(document).ready.......

SELECT CONVERT(NVARCHAR, LoginDate, 105)+' '+CONVERT(NVARCHAR, LoginDate, 108) AS LoginDate FROM YourTable

Output
-------------------
29-08-2013 13:55:48

I've used the TripAdvisor API before and its suited me well. It returns, per destination, a list of top-rated hotels, along with options to retrieve reviews, photos, nearby restaurants and a couple other useful things.

http://www.tripadvisor.com/help/what_type_of_tripadvisor_content_is_available

From the API page (available API content) :

* Hotel, attraction and restaurant ratings and reviews
* Top 10 lists of hotels, attractions and restaurants in a destination
* Traveler photos of a destination
* Travelers' Choice award badges for hotels and destinations

To expand upon @nstehr's answer, you could also use Yahoo Pipes to facilitate a more granular local search. Go to pipes.yahoo.com and do a search for existing hotel pipes and you'll get the idea..

You can also reset page number counter:

\setcounter{page}{1}

However, with this technique you get wrong page numbers in Acrobat in the top left page numbers field:

\maketitle: 1
\tableofcontents: 2
\setcounter{page}{1}
\section{Introduction}: 1
...

GET recipe

For this task you can use already available plugins and bootstrap extensions. Or you can make your own confirmation popup with just 3 lines of code. Check it out.

Say we have this links (note data-href instead of href) or buttons that we want to have delete confirmation for:

<a href="#" data-href="delete.php?id=23" data-toggle="modal" data-target="#confirm-delete">Delete record #23</a>

<button class="btn btn-default" data-href="/delete.php?id=54" data-toggle="modal" data-target="#confirm-delete">
    Delete record #54
</button>

Here #confirm-delete points to a modal popup div in your HTML. It should have an "OK" button configured like this:

<div class="modal fade" id="confirm-delete" tabindex="-1" role="dialog" aria-labelledby="myModalLabel" aria-hidden="true">
    <div class="modal-dialog">
        <div class="modal-content">
            <div class="modal-header">
                ...
            </div>
            <div class="modal-body">
                ...
            </div>
            <div class="modal-footer">
                <button type="button" class="btn btn-default" data-dismiss="modal">Cancel</button>
                <a class="btn btn-danger btn-ok">Delete</a>
            </div>
        </div>
    </div>
</div>

Now you only need this little javascript to make a delete action confirmable:

$('#confirm-delete').on('show.bs.modal', function(e) {
    $(this).find('.btn-ok').attr('href', $(e.relatedTarget).data('href'));
});

So on show.bs.modal event delete button href is set to URL with corresponding record id.

Demo: http://plnkr.co/edit/NePR0BQf3VmKtuMmhVR7?p=preview

POST recipe

I realize that in some cases there might be needed to perform POST or DELETE request rather then GET. It it still pretty simple without too much code. Take a look at the demo below with this approach:

// Bind click to OK button within popup
$('#confirm-delete').on('click', '.btn-ok', function(e) {

  var $modalDiv = $(e.delegateTarget);
  var id = $(this).data('recordId');

  $modalDiv.addClass('loading');
  $.post('/api/record/' + id).then(function() {
     $modalDiv.modal('hide').removeClass('loading');
  });
});

// Bind to modal opening to set necessary data properties to be used to make request
$('#confirm-delete').on('show.bs.modal', function(e) {
  var data = $(e.relatedTarget).data();
  $('.title', this).text(data.recordTitle);
  $('.btn-ok', this).data('recordId', data.recordId);
});

// Bind click to OK button within popup_x000D_
$('#confirm-delete').on('click', '.btn-ok', function(e) {_x000D_
_x000D_
  var $modalDiv = $(e.delegateTarget);_x000D_
  var id = $(this).data('recordId');_x000D_
_x000D_
  $modalDiv.addClass('loading');_x000D_
  setTimeout(function() {_x000D_
    $modalDiv.modal('hide').removeClass('loading');_x000D_
  }, 1000);_x000D_
_x000D_
  // In reality would be something like this_x000D_
  // $modalDiv.addClass('loading');_x000D_
  // $.post('/api/record/' + id).then(function() {_x000D_
  //   $modalDiv.modal('hide').removeClass('loading');_x000D_
  // });_x000D_
});_x000D_
_x000D_
// Bind to modal opening to set necessary data properties to be used to make request_x000D_
$('#confirm-delete').on('show.bs.modal', function(e) {_x000D_
  var data = $(e.relatedTarget).data();_x000D_
  $('.title', this).text(data.recordTitle);_x000D_
  $('.btn-ok', this).data('recordId', data.recordId);_x000D_
});

.modal.loading .modal-content:before {_x000D_
  content: 'Loading...';_x000D_
  text-align: center;_x000D_
  line-height: 155px;_x000D_
  font-size: 20px;_x000D_
  background: rgba(0, 0, 0, .8);_x000D_
  position: absolute;_x000D_
  top: 55px;_x000D_
  bottom: 0;_x000D_
  left: 0;_x000D_
  right: 0;_x000D_
  color: #EEE;_x000D_
  z-index: 1000;_x000D_
}

<script data-require="jquery@*" data-semver="2.0.3" src="//code.jquery.com/jquery-2.0.3.min.js"></script>_x000D_
<script data-require="bootstrap@*" data-semver="3.1.1" src="//netdna.bootstrapcdn.com/bootstrap/3.1.1/js/bootstrap.min.js"></script>_x000D_
<link data-require="[email protected]" data-semver="3.1.1" rel="stylesheet" href="//netdna.bootstrapcdn.com/bootstrap/3.1.1/css/bootstrap.min.css" />_x000D_
_x000D_
<div class="modal fade" id="confirm-delete" tabindex="-1" role="dialog" aria-labelledby="myModalLabel" aria-hidden="true">_x000D_
  <div class="modal-dialog">_x000D_
    <div class="modal-content">_x000D_
      <div class="modal-header">_x000D_
        <button type="button" class="close" data-dismiss="modal" aria-hidden="true">×</button>_x000D_
        <h4 class="modal-title" id="myModalLabel">Confirm Delete</h4>_x000D_
      </div>_x000D_
      <div class="modal-body">_x000D_
        <p>You are about to delete <b><i class="title"></i></b> record, this procedure is irreversible.</p>_x000D_
        <p>Do you want to proceed?</p>_x000D_
      </div>_x000D_
      <div class="modal-footer">_x000D_
        <button type="button" class="btn btn-default" data-dismiss="modal">Cancel</button>_x000D_
        <button type="button" class="btn btn-danger btn-ok">Delete</button>_x000D_
      </div>_x000D_
    </div>_x000D_
  </div>_x000D_
</div>_x000D_
<a href="#" data-record-id="23" data-record-title="The first one" data-toggle="modal" data-target="#confirm-delete">_x000D_
        Delete "The first one", #23_x000D_
    </a>_x000D_
<br />_x000D_
<button class="btn btn-default" data-record-id="54" data-record-title="Something cool" data-toggle="modal" data-target="#confirm-delete">_x000D_
  Delete "Something cool", #54_x000D_
</button>

Demo: http://plnkr.co/edit/V4GUuSueuuxiGr4L9LmG?p=preview

Bootstrap 2.3

Here is an original version of the code I made when I was answering this question for Bootstrap 2.3 modal.

$('#modal').on('show', function() {
    var id = $(this).data('id'),
        removeBtn = $(this).find('.danger');
    removeBtn.attr('href', removeBtn.attr('href').replace(/(&|\?)ref=\d*/, '$1ref=' + id));
});

Demo: http://jsfiddle.net/MjmVr/1595/

You can set environmental variables in Pycharm's run configurations menu.

1. Open the Run Configuration selector in the top-right and cick Edit Configurations...

   

2. Find Environmental variables and click ...

   

3. Add or change variables, then click OK

   

You can access your environmental variables with os.environ

import os
print(os.environ['SOME_VAR'])

You can create like this and you can add action also like this....

import UIKit

let myButton = UIButton(frame: CGRect(x: 0, y: 0, width: 50, height: 50))

init(nibName nibNameOrNil: String!, bundle nibBundleOrNil: NSBundle!)
{       super.init(nibName: nibName, bundle: nibBundle) 
        myButton.targetForAction("tappedButton:", withSender: self)
}

func tappedButton(sender: UIButton!)
{ 
     println("tapped button")
}

I implemented it in the following way. I wanted a generic MakeRequest method that could call my API and receive content for the body of the request - and also deserialise the response into the desired type. I create a Dictionary<string, string> object to house the content to be submitted, and then set the HttpRequestMessage Content property with it:

Generic method to call the API:

    private static T MakeRequest<T>(string httpMethod, string route, Dictionary<string, string> postParams = null)
    {
        using (var client = new HttpClient())
        {
            HttpRequestMessage requestMessage = new HttpRequestMessage(new HttpMethod(httpMethod), $"{_apiBaseUri}/{route}");

            if (postParams != null)
                requestMessage.Content = new FormUrlEncodedContent(postParams);   // This is where your content gets added to the request body


            HttpResponseMessage response = client.SendAsync(requestMessage).Result;

            string apiResponse = response.Content.ReadAsStringAsync().Result;
            try
            {
                // Attempt to deserialise the reponse to the desired type, otherwise throw an expetion with the response from the api.
                if (apiResponse != "")
                    return JsonConvert.DeserializeObject<T>(apiResponse);
                else
                    throw new Exception();
            }
            catch (Exception ex)
            {
                throw new Exception($"An error ocurred while calling the API. It responded with the following message: {response.StatusCode} {response.ReasonPhrase}");
            }
        }
    }

Call the method:

    public static CardInformation ValidateCard(string cardNumber, string country = "CAN")
    { 
        // Here you create your parameters to be added to the request content
        var postParams = new Dictionary<string, string> { { "cardNumber", cardNumber }, { "country", country } };
        // make a POST request to the "cards" endpoint and pass in the parameters
        return MakeRequest<CardInformation>("POST", "cards", postParams);
    }

Another method that worked for me on Windows 7 that did not require administrative privileges:

Click on the Start menu, search for "environment," click "Edit environment variables for your account."

In the window that opens, select "PATH" under "User variables for username" and click the "Edit..." button. Add your new path to the end of the existing Path, separated by a semi-colon (%PATH%;C:\Python27;...;C:\NewPath). Click OK on all the windows, open a new CMD window, and test the new variable.

If you're wondering why this optimization was added to range.__contains__, and why it wasn't added to xrange.__contains__ in 2.7:

First, as Ashwini Chaudhary discovered, issue 1766304 was opened explicitly to optimize [x]range.__contains__. A patch for this was accepted and checked in for 3.2, but not backported to 2.7 because "xrange has behaved like this for such a long time that I don't see what it buys us to commit the patch this late." (2.7 was nearly out at that point.)

Meanwhile:

Originally, xrange was a not-quite-sequence object. As the 3.1 docs say:

Range objects have very little behavior: they only support indexing, iteration, and the len function.

This wasn't quite true; an xrange object actually supported a few other things that come automatically with indexing and len,^* including __contains__ (via linear search). But nobody thought it was worth making them full sequences at the time.

Then, as part of implementing the Abstract Base Classes PEP, it was important to figure out which builtin types should be marked as implementing which ABCs, and xrange/range claimed to implement collections.Sequence, even though it still only handled the same "very little behavior". Nobody noticed that problem until issue 9213. The patch for that issue not only added index and count to 3.2's range, it also re-worked the optimized __contains__ (which shares the same math with index, and is directly used by count).^** This change went in for 3.2 as well, and was not backported to 2.x, because "it's a bugfix that adds new methods". (At this point, 2.7 was already past rc status.)

So, there were two chances to get this optimization backported to 2.7, but they were both rejected.

_{* In fact, you even get iteration for free with indexing alone, but in 2.3 xrange objects got a custom iterator.}

_{** The first version actually reimplemented it, and got the details wrong—e.g., it would give you MyIntSubclass(2) in range(5) == False. But Daniel Stutzbach's updated version of the patch restored most of the previous code, including the fallback to the generic, slow _PySequence_IterSearch that pre-3.2 range.__contains__ was implicitly using when the optimization doesn't apply.}

The following will allow you to get at both the key and value at the same time.

foreach ($arr as $key => $value)
{
  echo($key);
}

1.THE USE OF {}:

It initialize the array with the values { }

2.The difference between String array=new String[]; and String array=new String[]{};

String array=new String[]; and String array=new String[]{}; both are invalid statement in java.

It will gives you an error that you are trying to assign String array to String datatype. More specifically error is like this Type mismatch: cannot convert from String[] to String

3.String array=new String[10]{}; got error why?

Wrong because you are defining an array of length 10 ([10]), then defining an array of length String[10]{} 0

If you are working with Angular router, the RouterLinkActive directive can be used really elegantly:

<ul class="navbar-nav">
  <li class="nav-item"><a class="nav-link" routerLink="home" routerLinkActive="active">Home</a></li>
  <li class="nav-item"><a class="nav-link" routerLink="gallery" routerLinkActive="active">Gallery</a></li>
  <li class="nav-item"><a class="nav-link" routerLink="pricing" routerLinkActive="active">Prices</a></li>
  <li class="nav-item"><a class="nav-link" routerLink="contact" routerLinkActive="active">Contact</a></li>
</ul>

I also face this issue, I tried a lot of solutions, but none really worked for me

Here's how I solved it;

A. Grant ownership of the domain document root directory (say my root directory is/var/www/nginx-demo) to the Nginx user (www-data) to avoid any permission issues:

sudo chown -R www-data: /var/www/nginx-demo

B. Confirm that your virtual host server block conforms to this standard (say I am using localhost as my server_name and my root as /var/www/nginx-demo/website)

server {
   listen 80;
   listen [::]:80;

   server_name localhost;

   root /var/www/nginx-demo/website;
   index index.html;

   location / {
            try_files $uri $uri/ =404;
   }
}

C. Test the Nginx configuration for correct syntax:

sudo nginx -t

If there are no errors in the configuration syntax the output will look like this:

nginx: the configuration file /etc/nginx/nginx.conf syntax is ok
nginx: configuration file /etc/nginx/nginx.conf test is successful

D. Restart the Nginx service for the changes to take effect:

sudo systemctl restart nginx

E. Hard refresh your website in your browser to avoid cached files with incorrect headers using the keyboard keys Ctrl + F5 or Ctrl + Fn + F5.

That's all.

I hope this helps.

See the below code (taken from this post)

Put this code in a Module in VBA (Developer Tab -> Visual Basic)

Dim TimerActive As Boolean
Sub StartTimer()
    Start_Timer
End Sub
Private Sub Start_Timer()
    TimerActive = True
    Application.OnTime Now() + TimeValue("00:01:00"), "Timer"
End Sub
Private Sub Stop_Timer()
    TimerActive = False
End Sub
Private Sub Timer()
    If TimerActive Then
        ActiveSheet.Cells(1, 1).Value = Time
        Application.OnTime Now() + TimeValue("00:01:00"), "Timer"
    End If
End Sub

You can invoke the "StartTimer" function when the workbook opens and have it repeat every minute by adding the below code to your workbooks Visual Basic "This.Workbook" class in the Visual Basic editor.

Private Sub Workbook_Open()
    Module1.StartTimer
End Sub

Now, every time 1 minute passes the Timer procedure will be invoked, and set cell A1 equal to the current time.

In PowerShell v3, have a look at the Invoke-WebRequest and Invoke-RestMethod e.g.:

$msg = Read-Host -Prompt "Enter message"
$encmsg = [System.Web.HttpUtility]::UrlEncode($msg)
Invoke-WebRequest -Uri "http://smsserver/SNSManager/msgSend.jsp?uid&to=smartsms:*+001XXXXXX&msg=$encmsg&encoding=windows-1255"

New escape string in PowerShell V3, quoted from New V3 Language Features:

Easier Reuse of Command Lines From Cmd.exe

The web is full of command lines written for Cmd.exe. These commands lines work often enough in PowerShell, but when they include certain characters, for example, a semicolon (;), a dollar sign ($), or curly braces, you have to make some changes, probably adding some quotes. This seemed to be the source of many minor headaches.

To help address this scenario, we added a new way to “escape” the parsing of command lines. If you use a magic parameter --%, we stop our normal parsing of your command line and switch to something much simpler. We don’t match quotes. We don’t stop at semicolon. We don’t expand PowerShell variables. We do expand environment variables if you use Cmd.exe syntax (e.g. %TEMP%). Other than that, the arguments up to the end of the line (or pipe, if you are piping) are passed as is. Here is an example:

PS> echoargs.exe --% %USERNAME%,this=$something{weird}
Arg 0 is <jason,this=$something{weird}>

you can use servlet filter chain, but instead use the original one, you can create your own request yourownrequests extends HttpServletRequestWrapper.

swift solution

yourlabel.text = yourvariable

or self is use for when you are in async {brackets} or in some Extension

DispatchQueue.main.async{
    self.yourlabel.text = "typestring"
}

To add a prefix to all files and folders in the current directory using util-linux's rename (as opposed to prename, the perl variant from Debian and certain other systems), you can do:

rename '' <prefix> *

This finds the first occurrence of the empty string (which is found immediately) and then replaces that occurrence with your prefix, then glues on the rest of the file name to the end of that. Done.

For suffixes, you need to use the perl version or use find.

One good way to further your Python knowledge is to dig into the source code of the libraries, platforms, and frameworks you use already.

For example if you're building a site on Django, many questions that might stump you can be answered by looking at how Django implements the feature in question.

This way you'll continue to pick up new idioms, coding styles, and Python tricks. (Some will be good and some will be bad.)

And when you see something Pythony that you don't understand in the source, hop over to the #python IRC channel and you'll find plenty of "language lawyers" happy to explain.

An accumulation of these little clarifications over years leads to a much deeper understanding of the language and all of its ins and outs.

This link should get you started. Long story short, a div that has been styled to look like a scrollbar is used to catch click-and-drag events. Wired up to these events are methods that scroll the contents of another div which is set to an arbitrary height and typically has a css rule of overflow:scroll (there are variants on the css rules but you get the idea).

I'm all about the learning experience -- but after you've learned how it works, I recommend using a library (of which there are many) to do it. It's one of those "don't reinvent" things...

If obj Is Nothing Then
    ' need to initialize obj: '
    Set obj = ...
Else
    ' obj already set / initialized. '
End If

Or, if you prefer it the other way around:

If Not obj Is Nothing Then
    ' obj already set / initialized. '
Else
    ' need to initialize obj: '
    Set obj = ...
End If

For Windows you can try below solution

Copy your gradle-->bin path and add it to system environment variable path.

In my case gradle path is

C:\Users\username\.gradle\wrapper\dists\gradle-3.3-all\55gk2rcmfc6p2dg9u9ohc3hw9\gradle-3.3\bin

This solution worked for me.

I had the same issue. It was related to the Build Settings -> Code Signing Identity -> Release which was set to iOS Developer. If has to be set to iOS Distribution in order for Xcode upload to work.

You could also use GNU screen which just about every Linux/Unix system should have.

If you are on Ubuntu/Debian, its enhanced variant byobu is rather nice too.

I ran into this same issue. Someone had logged onto my computer and used their TFS credentials. I'm running VS2012, Windows 7, and the network admins have Credential Manager disabled.

Run this command from a command window with the same user your running visual studio as.

rundll32.exe keymgr.dll,KRShowKeyMgr

You'll see a popup with all your stored credentials. Remove the one for your TFS server.

Note: You will need to restart visual studio because it caches the tfs credentials.

$articles =DB::table('articles')
                ->join('categories','articles.id', '=', 'categories.id')
                ->join('user', 'articles.user_id', '=', 'user.id')
                ->select('articles.id','articles.title','articles.body','user.user_name', 'categories.category_name')
                ->get();
return view('myarticlesview',['articles'=>$articles]);

try

location = url;

function url() {_x000D_
    location = 'https://example.com';_x000D_
}

<input type="button" value="Inline" _x000D_
onclick="location='https://example.com'" />_x000D_
_x000D_
<input type="button" value="URL()" _x000D_
onclick="url()" />

I know this is an old post and you marked the question as answered. I was looking for the same thing recently and I found the histedit extension very useful. The process is explained here:

http://knowledgestockpile.blogspot.com/2010/12/changing-commit-message-of-revision-in.html

For me, this worked:

_.map(_.toPairs(data), d => _.fromPairs([d]));

It turns

{"a":"b", "c":"d", "e":"f"} 

into

[{"a":"b"}, {"c":"d"}, {"e":"f"}]

if you are using lodash

_.words('This, is : my - test,line:').join(' ')

This Example

_.words('"This., -/ is #! an $ % ^ & * example ;: {} of a = -_ string with `~)() punctuation"').join(' ')

<div style="width: 100%; overflow: scroll;"><table class="table table-striped table-bordered" style="font-size:12px">

<location path="ControllerName/ActionName">
    <system.web>
        <httpRuntime executionTimeout="1000"/>
    </system.web>
</location>

Probably it is better to set such values in web.config instead of controller. Hardcoding of configurable options is considered harmful.

Try out Ctrl + z But it will kill the process, not suspend it.

all above answers is correct but however

a = [];
len(list1) - 1 # where 0 - 1 = -1

to be more precisely

a = [];
index = len(a) - 1 if a else None;

if index == None : raise Exception("Empty Array")

since arrays is starting with 0

Use cl scr on the Sql* command line tool to clear all the matter on the screen.

In SQL, anything you evaluate / compute with NULL results into UNKNOWN

This is why SELECT * FROM MyTable WHERE MyColumn != NULL or SELECT * FROM MyTable WHERE MyColumn <> NULL gives you 0 results.

To provide a check for NULL values, isNull function is provided.

Moreover, you can use the IS operator as you used in the third query.

Hope this helps.

Try using sprintf:

unsigned long x=1000000;
char buffer[21];
sprintf(buffer,"%lu", x);

Edit:

Notice that you have to allocate a buffer in advance, and have no idea how long the numbers will actually be when you do so. I'm assuming 32bit longs, which can produce numbers as big as 10 digits.

See Carl Smotricz's answer for a better explanation of the issues involved.

Confirmed with an Apple Engineer in the Swift lab this morning at WWDC that there currently aren't any #pragma or equivalent at the moment, they consider this a bug, and it will arrive soon, so I am guessing beta 2, I hope.

Anyway, it's on it's way.

Xcode now supports //MARK:, //TODO: and //FIXME landmarks to annotate your code and lists them in the jump bar

Do not write tests for private methods. This defeats the point of unit tests.

• You should be testing the public API of your class
• You should NOT be testing the implimentation details of your class

Example

class SomeClass {

  public addNumber(a: number, b: number) {
      return a + b;
  }
}

The test for this method should not need to change if later the implementation changes but the behaviour of the public API remains the same.

class SomeClass {

  public addNumber(a: number, b: number) {
      return this.add(a, b);
  }

  private add(a: number, b: number) {
       return a + b;
  }
}

Don't make methods and properties public just in order to test them. This usually means that either:

1. You are trying to test implementation rather than API (public interface).
2. You should move the logic in question into its own class to make testing easier.

If you have the directory name in myDirectoryPath,

import java.io.File;
...
  File dir = new File(myDirectoryPath);
  File[] directoryListing = dir.listFiles();
  if (directoryListing != null) {
    for (File child : directoryListing) {
      // Do something with child
    }
  } else {
    // Handle the case where dir is not really a directory.
    // Checking dir.isDirectory() above would not be sufficient
    // to avoid race conditions with another process that deletes
    // directories.
  }

clearfix is the same as overflow:hidden. Both clear floated children of the parent, but clearfix will not cut off the element which overflow to it's parent. It also works in IE8 & above.

There is no need to define "." in content & .clearfix. Just write like this:

.clr:after {
    clear: both;
    content: "";
    display: block;
}

HTML

<div class="parent clr"></div>

Read these links for more

http://css-tricks.com/snippets/css/clear-fix/,

What methods of ‘clearfix’ can I use?

Just make sure that the controller name is the same as yours DeliveryController if you renamed it (it will not change automatically!). if you rename the project name too you should delete the reference to this project from the Bin folder. Don't forget to specify the method get or post.

In Swift 4

Use this snippet:

    let delayInSec = 1.0
    DispatchQueue.main.asyncAfter(deadline: .now() + delayInSec) {
       // code here
       print("It works")
    }

I installed mod_rewrite to fix the issue. Below link provides an installation guide:- http://www.iasptk.com/enable-apache-mod_rewrite-ubuntu-14-04-lts/

Your listener.ora is misconfigured. There is no orcl service.

The faster code is not really up to the language, is the compiler so you can see the ms-vb "compiler" that generates bloated, slower and redundant object code that is tied together inside an ".exe", but powerBasic generates too way better code. Object code made by a C and C++ compilers is generated in some phases (at least 2) but by design most Fortran compilers have at least 5 phases including high-level optimizations so by design Fortran will always have the capability to generate highly optimized code. So at the end is the compiler not the language you should ask for, the best compiler i know is the Intel Fortran Compiler because you can get it on LINUX and Windows and you can use VS as the IDE, if you're looking for a cheap tigh compiler you can always relay on OpenWatcom.

More info about this: http://ed-thelen.org/1401Project/1401-IBM-Systems-Journal-FORTRAN.html

There is of course some apache log files. Search in your apache configuration files for 'Log' keyword, you'll certainly find plenty of them. Depending on your OS and installation places may vary (in a Typical Linux server it would be /var/log/apache2/[access|error].log).

Having a 503 error in Apache usually means the proxied page/service is not available. I assume you're using tomcat and that means tomcat is either not responding to apache (timeout?) or not even available (down? crashed?). So chances are that it's a configuration error in the way to connect apache and tomcat or an application inside tomcat that is not even sending a response for apache.

Sometimes, in production servers, it can as well be that you get too much traffic for the tomcat server, apache handle more request than the proxyied service (tomcat) can accept so the backend became unavailable.

I would say to just grab the underlying RDD. In Scala:

df.rdd.isEmpty

in Python:

df.rdd.isEmpty()

That being said, all this does is call take(1).length, so it'll do the same thing as Rohan answered...just maybe slightly more explicit?

Anyway you need 'Year'.

In some engineering fields, you have fixed day and month and year can be variable. But that day and month are important for beginning calculation without considering which year you are. Your user, for example, only should select a day and a month and providing year is up to you.

You can create a custom combobox using this: Customizable ComboBox Drop-Down.

1- In VS create a user control.

2- See the code in the link above for impelemnting that control.

3- Create another user control and place in it 31 button or label and above them place a label to show months.

4- Place the control in step 3 in your custom combobox.

5- Place the control in setp 4 in step 1.

You now have a control with only days and months. You can use any year that you have in your database or ....

No, VBA does not have this functionality. You can use the technique of adding each item to a collection using the item as the key. Since a collection does not allow duplicate keys, the result is distinct values that you can copy to an array, if needed.

You may also want something more robust. See Distinct Values Function at http://www.cpearson.com/excel/distinctvalues.aspx

Distinct Values Function

A VBA Function that will return an array of the distinct values in a range or array of input values.

Excel has some manual methods, such as Advanced Filter, for getting a list of distinct items from an input range. The drawback of using such methods is that you must manually refresh the results when the input data changes. Moreover, these methods work only with ranges, not arrays of values, and, not being functions, cannot be called from worksheet cells or incorporated into array formulas. This page describes a VBA function called DistinctValues that accepts as input either a range or an array of data and returns as its result an array containing the distinct items from the input list. That is, the elements with all duplicates removed. The order of the input elements is preserved. The order of the elements in the output array is the same as the order in the input values. The function can be called from an array entered range on a worksheet (see this page for information about array formulas), or from in an array formula in a single worksheet cell, or from another VB function.

This API gives you the current time and several formats in JSON - https://market.mashape.com/parsify/format#time. Here's a sample response:

{
  "time": {
    "daysInMonth": 31,
    "millisecond": 283,
    "second": 42,
    "minute": 55,
    "hour": 1,
    "date": 6,
    "day": 3,
    "week": 10,
    "month": 2,
    "year": 2013,
    "zone": "+0000"
  },
  "formatted": {
    "weekday": "Wednesday",
    "month": "March",
    "ago": "a few seconds",
    "calendar": "Today at 1:55 AM",
    "generic": "2013-03-06T01:55:42+00:00",
    "time": "1:55 AM",
    "short": "03/06/2013",
    "slim": "3/6/2013",
    "hand": "Mar 6 2013",
    "handTime": "Mar 6 2013 1:55 AM",
    "longhand": "March 6 2013",
    "longhandTime": "March 6 2013 1:55 AM",
    "full": "Wednesday, March 6 2013 1:55 AM",
    "fullSlim": "Wed, Mar 6 2013 1:55 AM"
  },
  "array": [
    2013,
    2,
    6,
    1,
    55,
    42,
    283
  ],
  "offset": 1362534942283,
  "unix": 1362534942,
  "utc": "2013-03-06T01:55:42.283Z",
  "valid": true,
  "integer": false,
  "zone": 0
}

Try this one

DATE_ADD(datefield, INTERVAL 30 MINUTE)

You can use following code snippet

((ch.qos.logback.classic.Logger)LoggerFactory.getLogger(packageName)).setLevel(ch.qos.logback.classic.Level.toLevel(logLevel));

I got the same error in ReactJS function component, using ReactJS useState hook. The solution was to declare the type of useState at initialisation:

const [items , setItems] = useState<IItem[]>([]); // replace IItem[] with your own typing: string, boolean...

The issue is with this line

 xlo.Worksheets(1).Cells(2, 2) = TextBox1.Text

You have the textbox defined at some other location which you are not using here. Excel is unable to find the textbox object in the current sheet while this textbox was defined in xlw.

Hence replace this with

 xlo.Worksheets(1).Cells(2, 2) = worksheets("xlw").TextBox1.Text 

I faced same issue apply all possible solution but finally this solve my problem

export class AppRoutingModule {
constructor(private router: Router) {
    this.router.errorHandler = (error: any) => {
        this.router.navigate(['404']); // or redirect to default route
    }
  }
}

Hope this will help you.

I also faced the same issue. Just restarting my servers solved the issue.

You need a SMTP server to send your mail. If you have one available which does not require SMTP authentification (maybe your ISP's?) just edit the 'SMTP' ([mail function]) setting in your php.ini file.

If this is no option because your SMTP server requires authentification you won't be able to use the internal mail() function and have to use some 3rd party class which supports smtp auth. e.g. http://pear.php.net/package/Mail/

Here is the solution total html with php and database connections

   <!doctype html>
    <html lang="en">
    <head>
      <meta charset="UTF-8">
      <title>database connections</title>
    </head>
    <body>
      <?php
      $username = "database-username";
      $password = "database-password";
      $host = "localhost";

      $connector = mysql_connect($host,$username,$password)
          or die("Unable to connect");
        echo "Connections are made successfully::";
      $selected = mysql_select_db("test_db", $connector)
        or die("Unable to connect");

      //execute the SQL query and return records
      $result = mysql_query("SELECT * FROM table_one ");
      ?>
      <table border="2" style= "background-color: #84ed86; color: #761a9b; margin: 0 auto;" >
      <thead>
        <tr>
          <th>Employee_id</th>
          <th>Employee_Name</th>
          <th>Employee_dob</th>
          <th>Employee_Adress</th>
          <th>Employee_dept</th>
          <td>Employee_salary</td>
        </tr>
      </thead>
      <tbody>
        <?php
          while( $row = mysql_fetch_assoc( $result ) ){
            echo
            "<tr>
              <td>{$row\['employee_id'\]}</td>
              <td>{$row\['employee_name'\]}</td>
              <td>{$row\['employee_dob'\]}</td>
              <td>{$row\['employee_addr'\]}</td>
              <td>{$row\['employee_dept'\]}</td>
              <td>{$row\['employee_sal'\]}</td> 
            </tr>\n";
          }
        ?>
      </tbody>
    </table>
     <?php mysql_close($connector); ?>
    </body>
    </html>

1752 was the year of Britain switching from the Julian to the Gregorian calendar. I believe two weeks in September 1752 never happened as a result, which has implications for dates in that general area.

An explanation: http://uneasysilence.com/archive/2007/08/12008/ (Internet Archive version)

Use the translateY CSS property to vertically center your text in it's container

<style>
.centertext{

    position: relative;
    top: 50%;
    transform: translateY(40%);

}
</style>

And then apply it to your containing DIV

  <div class="centertext">
        <font style="color:white; font-size:20px;">   Your Text Here </font>
  </div>

Adjust the translateY percentage to suit your needs. Hope this helps

With library(lubridate), numeric representations of date and time saved as the number of seconds since 1970-01-01 00:00:00 UTC, can be coerced into dates with as_datetime():

lubridate::as_datetime(1352068320)

[1] "2012-11-04 22:32:00 UTC"

You can just iterate over the data attributes like any other object to get keys and values, here's how to do it with $.each:

    $.each($('#myEl').data(), function(key, value) {
        console.log(key);
        console.log(value);
    });

Django 2.1.1 The primary answer got me halfway to answering my question. It did not help me save the result to a field in my actual model. In my case I wanted a textfield that a user could enter data into, then when a save occurred the data would be processed and the result put into a field in the model and saved. While the original answer showed how to get the value from the extra field, it did not show how to save it back to the model at least in Django 2.1.1

This takes the value from an unbound custom field, processes, and saves it into my real description field:

class WidgetForm(forms.ModelForm):
    extra_field = forms.CharField(required=False)

    def processData(self, input):
        # example of error handling
        if False:
            raise forms.ValidationError('Processing failed!')

        return input + " has been processed"

    def save(self, commit=True):
        extra_field = self.cleaned_data.get('extra_field', None)

        # self.description = "my result" note that this does not work

        # Get the form instance so I can write to its fields
        instance = super(WidgetForm, self).save(commit=commit)

        # this writes the processed data to the description field
        instance.description = self.processData(extra_field)

        if commit:
            instance.save()

        return instance

    class Meta:
        model = Widget
        fields = "__all__"

Warning: Never ever refer to w3schools for learning purposes. They have so many mistakes in their tutorials.

According to the mysqli_query documentation, the first parameter must be a connection string:

$link = mysqli_connect("localhost","root","","web_table");

mysqli_query($link,"INSERT INTO web_formitem (`ID`, `formID`, `caption`, `key`, `sortorder`, `type`, `enabled`, `mandatory`, `data`)
VALUES (105, 7, 'Tip izdelka (6)', 'producttype_6', 42, 5, 1, 0, 0)") 
or die(mysqli_error($link));

Note: Add backticks ` for column names in your insert query as some of your column names are reserved words.

You can use System.Diagnostics.Process.Start.

Or use the WinApi directly with something like the following, which will launch explorer.exe. You can use the fourth parameter to ShellExecute to give it a starting directory.

public partial class Window1 : Window
{
    public Window1()
    {
        ShellExecute(IntPtr.Zero, "open", "explorer.exe", "", "", ShowCommands.SW_NORMAL);
        InitializeComponent();
    }

    public enum ShowCommands : int
    {
        SW_HIDE = 0,
        SW_SHOWNORMAL = 1,
        SW_NORMAL = 1,
        SW_SHOWMINIMIZED = 2,
        SW_SHOWMAXIMIZED = 3,
        SW_MAXIMIZE = 3,
        SW_SHOWNOACTIVATE = 4,
        SW_SHOW = 5,
        SW_MINIMIZE = 6,
        SW_SHOWMINNOACTIVE = 7,
        SW_SHOWNA = 8,
        SW_RESTORE = 9,
        SW_SHOWDEFAULT = 10,
        SW_FORCEMINIMIZE = 11,
        SW_MAX = 11
    }

    [DllImport("shell32.dll")]
    static extern IntPtr ShellExecute(
        IntPtr hwnd,
        string lpOperation,
        string lpFile,
        string lpParameters,
        string lpDirectory,
        ShowCommands nShowCmd);
}

The declarations come from the pinvoke.net website.

Try this After open web.config file in application and add sample db connection in connectionStrings section like this

<connectionStrings>
<add name="yourconnectinstringName" connectionString="Data Source= DatabaseServerName; Integrated Security=true;Initial Catalog= YourDatabaseName; uid=YourUserName; Password=yourpassword; " providerName="System.Data.SqlClient"/>
</connectionStrings >

You can also use scipy.signal.welch to estimate the power spectral density using Welch’s method. Here is an comparison between np.fft.fft and scipy.signal.welch:

from scipy import signal
import numpy as np
import matplotlib.pyplot as plt

fs = 10e3
N = 1e5
amp = 2*np.sqrt(2)
freq = 1234.0
noise_power = 0.001 * fs / 2
time = np.arange(N) / fs
x = amp*np.sin(2*np.pi*freq*time)
x += np.random.normal(scale=np.sqrt(noise_power), size=time.shape)

# np.fft.fft
freqs = np.fft.fftfreq(time.size, 1/fs)
idx = np.argsort(freqs)
ps = np.abs(np.fft.fft(x))**2
plt.figure()
plt.plot(freqs[idx], ps[idx])
plt.title('Power spectrum (np.fft.fft)')

# signal.welch
f, Pxx_spec = signal.welch(x, fs, 'flattop', 1024, scaling='spectrum')
plt.figure()
plt.semilogy(f, np.sqrt(Pxx_spec))
plt.xlabel('frequency [Hz]')
plt.ylabel('Linear spectrum [V RMS]')
plt.title('Power spectrum (scipy.signal.welch)')
plt.show()

[

Try this, it will do the work:

log_file=$curr_dir/log_file.txt
exec > >(tee -a ${log_file} )
exec 2> >(tee -a ${log_file} >&2)

If you actually have set a root password and you've just lost/forgotten it:

1. Stop MySQL

2. Restart it manually with the skip-grant-tables option: mysqld_safe --skip-grant-tables

3. Now, open a new terminal window and run the MySQL client: mysql -u root

4. Reset the root password manually with this MySQL command: UPDATE mysql.user SET Password=PASSWORD('password') WHERE User='root'; If you are using MySQL 5.7 (check using mysql --version in the Terminal) then the command is:

   UPDATE mysql.user SET authentication_string=PASSWORD('password')  WHERE  User='root';
   

5. Flush the privileges with this MySQL command: FLUSH PRIVILEGES;

From http://www.tech-faq.com/reset-mysql-password.shtml

(Maybe this isn't what you need, Abs, but I figure it could be useful for people stumbling across this question in the future)

when I am testing "typeof obj === undefined", the alert(typeof obj) returning object, even though obj is undefined. Since obj is type of Object its returning Object, not undefined.

So after hours of testing I opted below technique.

if(document.getElementById(obj) !== null){
//do...
}else{
//do...
}

I am not sure why the first technique didn't work.But I get done my work using this.

You can use following formulas.

For Excel 2007 or later:

=IFERROR(VLOOKUP(D3,List!A:C,3,FALSE),"No Match")

For Excel 2003:

=IF(ISERROR(MATCH(D3,List!A:A, 0)), "No Match", VLOOKUP(D3,List!A:C,3,FALSE))

Note, that

• I'm using List!A:C in VLOOKUP and returns value from column ? 3
• I'm using 4th argument for VLOOKUP equals to FALSE, in that case VLOOKUP will only find an exact match, and the values in the first column of List!A:C do not need to be sorted (opposite to case when you're using TRUE).

Here is a simple example using the MVVM Light Messenger instead of an event. The view model sends a close message when a button is clicked:

    public MainViewModel()
    {
        QuitCommand = new RelayCommand(ExecuteQuitCommand);
    }

    public RelayCommand QuitCommand { get; private set; }

    private void ExecuteQuitCommand() 
    {
        Messenger.Default.Send<CloseMessage>(new CloseMessage());
    }

Then it is received in the code behind of the window.

    public Main()
    {   
        InitializeComponent();
        Messenger.Default.Register<CloseMessage>(this, HandleCloseMessage);
    }

    private void HandleCloseMessage(CloseMessage closeMessage)
    {
        Close();
    }

In file /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS5.1.sdk/SDKSettings.plist

change the CODE_SIGNING_REQUIRED YES

to

CODE_SIGNING_REQUIRED NO

Restart Xcode

Don't get the request stream, quite simply. GET requests don't usually have bodies (even though it's not technically prohibited by HTTP) and WebRequest doesn't support it - but that's what calling GetRequestStream is for, providing body data for the request.

Given that you're trying to read from the stream, it looks to me like you actually want to get the response and read the response stream from that:

WebRequest request = WebRequest.Create(get.AbsoluteUri + args);
request.Method = "GET";
using (WebResponse response = request.GetResponse())
{
    using (Stream stream = response.GetResponseStream())
    {
        XmlTextReader reader = new XmlTextReader(stream);
        ...
    }
}

Try:

SELECT convert(datetime, '23/07/2009', 103)

this is British/French standard.

After searching for an hour or two ,I've found a simple solution below.

const date = new Date(`${date from client} GMT`);

inside double ticks, there is a date from client side plust GMT.

I'm first time commenting, constructive criticism will be welcomed.

Use os.path.getsize(path) which will

Return the size, in bytes, of path. Raise OSError if the file does not exist or is inaccessible.

import os
os.path.getsize('C:\\Python27\\Lib\\genericpath.py')

Or use os.stat(path).st_size

import os
os.stat('C:\\Python27\\Lib\\genericpath.py').st_size 

Or use Path(path).stat().st_size (Python 3.4+)

from pathlib import Path
Path('C:\\Python27\\Lib\\genericpath.py').stat().st_size

best way I know

         window.onbeforeunload = function (e) {
            var e = e || window.event;
            var msg = "Do you really want to leave this page?"

            // For IE and Firefox
            if (e) {
                e.returnValue = msg;
            }

            // For Safari / chrome
            return msg;
         };

have you tried:

.image_block{
text-align: center;
vertical-align: bottom;
}

MVC 4 example...

Note that you do not always have to pass parameter named ID

var message = model.UserName + " - thanks for taking yourtime to register on our glorious site. ";
return RedirectToAction("ThankYou", "Account", new { whatever = message });

And,

public ActionResult ThankYou(string whatever) {
        ViewBag.message = whatever;
        return View();
} 

Of course you can assign string to model fields instead of using ViewBag if that is your preference.

For portability you can say "${s#"${s%?}"}":

#!/bin/sh
m=bzzzM n=bzzzN
for s in \
    'vv'  'w'   ''    'uu  ' ' uu ' '  uu' / \
    'ab?' 'a?b' '?ab' 'ab??' 'a??b' '??ab' / \
    'cd#' 'c#d' '#cd' 'cd##' 'c##d' '##cd' / \
    'ef%' 'e%f' '%ef' 'ef%%' 'e%%f' '%%ef' / \
    'gh*' 'g*h' '*gh' 'gh**' 'g**h' '**gh' / \
    'ij"' 'i"j' '"ij' "ij'"  "i'j"  "'ij"  / \
    'kl{' 'k{l' '{kl' 'kl{}' 'k{}l' '{}kl' / \
    'mn$' 'm$n' '$mn' 'mn$$' 'm$$n' '$$mn' /
do  case $s in
    (/) printf '\n' ;;
    (*) printf '.%s. ' "${s#"${s%?}"}" ;;
    esac
done

Output:

.v. .w. .. . . . . .u. 
.?. .b. .b. .?. .b. .b. 
.#. .d. .d. .#. .d. .d. 
.%. .f. .f. .%. .f. .f. 
.*. .h. .h. .*. .h. .h. 
.". .j. .j. .'. .j. .j. 
.{. .l. .l. .}. .l. .l. 
.$. .n. .n. .$. .n. .n. 

A more functional approach would be by using dict.get

input_nums = [int(in_str) for in_str in input_str.split())
strikes = list(map(number_map.get, input_nums.split()))

One can observe that the conversion is a little clumsy, better would be to use the abstraction of function composition:

def compose2(f, g):
    return lambda x: f(g(x))

strikes = list(map(compose2(number_map.get, int), input_str.split()))

Example:

list(map(compose2(number_map.get, int), ["1", "2", "7"]))
Out[29]: [-3, -2, None]

Obviously in Python 3 you would avoid the explicit conversion to a list. A more general approach for function composition in Python can be found here.

(Remark: I came here from the Design of Computer Programs Udacity class, to write:)

def word_score(word):
    "The sum of the individual letter point scores for this word."
    return sum(map(POINTS.get, word))

This is what I used to copy some resource files: the copy-files is an empty target to ignore errors

 add_custom_target(copy-files ALL
    COMMAND ${CMAKE_COMMAND} -E copy_directory
    ${CMAKE_BINARY_DIR}/SOURCEDIRECTORY
    ${CMAKE_BINARY_DIR}/DESTINATIONDIRECTORY
    )

For me it started working after selecting "Remove additional files at destination" in File publish options under settings on the publish dialog.

Sometimes deleting the .lock file does not work. You can try this:

Remove RECENT_WORKSPACES line from eclipse/configuration/.settings/org.eclipse.ui.ide.prefs

For the more inexperienced, I have decided to add an example to demonstrate how to input and output an ArrayList of Integer arrays based on this question here.

    ArrayList<Integer[]> arrayList = new ArrayList<Integer[]>();
    while(n > 0)
    {
        int d = scan.nextInt();
       Integer temp[] = new Integer[d];
        for (int i = 0 ; i < d ; i++)
        {
            int t = scan.nextInt();
            temp[i]=Integer.valueOf(t);
        }
        arrayList.add(temp);
        n--;
    }//n is the size of the ArrayList that has been taken as a user input & d is the size 
    //of each individual array.

     //to print something  out from this ArrayList, we take in two 
    // values,index and index1 which is the number of the line we want and 
    // and the position of the element within that line (since the question
    // followed a 1-based numbering scheme, I did not change it here)

    System.out.println(Integer.valueOf(arrayList.get(index-1)[index1-1]));

Thanks to this answer on this question here, I got the correct answer. I believe this satisfactorily answers OP's question, albeit a little late and can serve as an explanation for those with less experience.

You can use data-* attribute to embed custom data. The data-* attributes gives us the ability to embed custom data attributes on all HTML elements.

jQuery .data() method allows you to get/set data of any type to DOM elements in a way that is safe from circular references and therefore from memory leaks.

jQuery .attr() method get/set attribute value for only the first element in the matched set.

Example:

<span id="test" title="foo" data-kind="primary">foo</span>

$("#test").attr("title");
$("#test").attr("data-kind");
$("#test").data("kind");
$("#test").data("value", "bar");

use sth like

<input type="text" name="yourName" placeholder="A new value" />

I was facing a problem like this in my local system but not in the live server. I also mentioned another solution on this page its before, but that was not working in localhost.so find a new solution of this, that is working in the localhost-WAMP Server.

cURL Error #:SSL certificate problem: unable to get local issuer certificate

sometimes system could not find your cacert.pem in your drive. so you can define this in your code where you are going to use CURL

Note that i am fulfilling all conditions for this like OPEN-SSL library active and other things.

check this code of CURL.

 $curl = curl_init();
 curl_setopt_array($curl, array(
            CURLOPT_URL =>$url,
            CURLOPT_HTTP_VERSION => CURL_HTTP_VERSION_1_1,
            CURLOPT_CUSTOMREQUEST => "GET",
            CURLOPT_RETURNTRANSFER=> true,
        ));
curl_setopt($curl, CURLOPT_CAINFO, "f:/wamp/bin/cacert.pem"); // <------ 
curl_setopt($curl, CURLOPT_CAPATH, "f:/wamp/bin/cacert.pem"); // <------
$response = json_decode(curl_exec($curl),true);
$err = curl_error($curl);
curl_close($curl);

but this solution may not work in live server. because of absolute path of cacert.pem

Linux server time and PHP time() difference time zone as follows:

<?php
    putenv("TZ=Asia/Kabul");
    $t = time();
    echo date('d/m/Y H:i:sa', $t);
?>

Just want to add one more way. Found it elsewhere, and is quite simple. Say I want to pass yes for all the prompts at command line for a command "execute_command", Then I would simply pipe yes to it.

yes | execute_command

This will use yes as the answer to all yes/no prompts.

The latest google api docs document how to write to a spreadsheet with python but it's a little difficult to navigate to. Here is a link to an example of how to append.

The following code is my first successful attempt at appending to a google spreadsheet.

import httplib2
import os

from apiclient import discovery
import oauth2client
from oauth2client import client
from oauth2client import tools

try:
    import argparse
    flags = argparse.ArgumentParser(parents=[tools.argparser]).parse_args()
except ImportError:
    flags = None

# If modifying these scopes, delete your previously saved credentials
# at ~/.credentials/sheets.googleapis.com-python-quickstart.json
SCOPES = 'https://www.googleapis.com/auth/spreadsheets'
CLIENT_SECRET_FILE = 'client_secret.json'
APPLICATION_NAME = 'Google Sheets API Python Quickstart'


def get_credentials():
    """Gets valid user credentials from storage.

    If nothing has been stored, or if the stored credentials are invalid,
    the OAuth2 flow is completed to obtain the new credentials.

    Returns:
        Credentials, the obtained credential.
    """
    home_dir = os.path.expanduser('~')
    credential_dir = os.path.join(home_dir, '.credentials')
    if not os.path.exists(credential_dir):
        os.makedirs(credential_dir)
    credential_path = os.path.join(credential_dir,
                                   'mail_to_g_app.json')

    store = oauth2client.file.Storage(credential_path)
    credentials = store.get()
    if not credentials or credentials.invalid:
        flow = client.flow_from_clientsecrets(CLIENT_SECRET_FILE, SCOPES)
        flow.user_agent = APPLICATION_NAME
        if flags:
            credentials = tools.run_flow(flow, store, flags)
        else: # Needed only for compatibility with Python 2.6
            credentials = tools.run(flow, store)
        print('Storing credentials to ' + credential_path)
    return credentials

def add_todo():
    credentials = get_credentials()
    http = credentials.authorize(httplib2.Http())
    discoveryUrl = ('https://sheets.googleapis.com/$discovery/rest?'
                    'version=v4')
    service = discovery.build('sheets', 'v4', http=http,
                              discoveryServiceUrl=discoveryUrl)

    spreadsheetId = 'PUT YOUR SPREADSHEET ID HERE'
    rangeName = 'A1:A'

    # https://developers.google.com/sheets/guides/values#appending_values
    values = {'values':[['Hello Saturn',],]}
    result = service.spreadsheets().values().append(
        spreadsheetId=spreadsheetId, range=rangeName,
        valueInputOption='RAW',
        body=values).execute()

if __name__ == '__main__':
    add_todo()

this method also encounter a deprecate warning:

org.junit.Assert.assertEquals(float expected,float actual) //deprecated

It is because currently junit prefer a third parameter rather than just two float variables input.

The third parameter is delta:

public static void assertEquals(double expected,double actual,double delta) //replacement

this is mostly used to deal with inaccurate Floating point calculations

for more information, please refer this problem: Meaning of epsilon argument of assertEquals for double values

Using regular for-loop without external libraries:

Convert int[] to Integer[]:

int[] primitiveArray = {1, 2, 3, 4, 5};
Integer[] objectArray = new Integer[primitiveArray.length];

for(int ctr = 0; ctr < primitiveArray.length; ctr++) {
    objectArray[ctr] = Integer.valueOf(primitiveArray[ctr]); // returns Integer value
}

Convert Integer[] to int[]:

Integer[] objectArray = {1, 2, 3, 4, 5};
int[] primitiveArray = new int[objectArray.length];

for(int ctr = 0; ctr < objectArray.length; ctr++) {
    primitiveArray[ctr] = objectArray[ctr].intValue(); // returns int value
}

In my case, I created a new ChildComponent in Parentcomponent whereas both in the same module but Parent is registered in a shared module so I created ChildComponent using CLI which registered Child in the current module but my parent was registered in the shared module.

So register the ChildComponent in Shared Module manually.

Float has 32 bit (4 bytes) with 8 places accuracy. Double has 64 bit (8 bytes) with 16 places accuracy.

If you need better accuracy, use Double instead of Float.

1. Why is this happening?

   The entire ext/mysql PHP extension, which provides all functions named with the prefix mysql_, was officially deprecated in PHP v5.5.0 and removed in PHP v7.

   It was originally introduced in PHP v2.0 (November 1997) for MySQL v3.20, and no new features have been added since 2006. Coupled with the lack of new features are difficulties in maintaining such old code amidst complex security vulnerabilities.

   The manual has contained warnings against its use in new code since June 2011.

2. How can I fix it?

   As the error message suggests, there are two other MySQL extensions that you can consider: MySQLi and PDO_MySQL, either of which can be used instead of ext/mysql. Both have been in PHP core since v5.0, so if you're using a version that is throwing these deprecation errors then you can almost certainly just start using them right away—i.e. without any installation effort.

   They differ slightly, but offer a number of advantages over the old extension including API support for transactions, stored procedures and prepared statements (thereby providing the best way to defeat SQL injection attacks). PHP developer Ulf Wendel has written a thorough comparison of the features.

   Hashphp.org has an excellent tutorial on migrating from ext/mysql to PDO.

3. I understand that it's possible to suppress deprecation errors by setting error_reporting in php.ini to exclude E_DEPRECATED:

   error_reporting = E_ALL ^ E_DEPRECATED
   

   What will happen if I do that?

   Yes, it is possible to suppress such error messages and continue using the old ext/mysql extension for the time being. But you really shouldn't do this—this is a final warning from the developers that the extension may not be bundled with future versions of PHP (indeed, as already mentioned, it has been removed from PHP v7). Instead, you should take this opportunity to migrate your application now, before it's too late.

   Note also that this technique will suppress all E_DEPRECATED messages, not just those to do with the ext/mysql extension: therefore you may be unaware of other upcoming changes to PHP that would affect your application code. It is, of course, possible to only suppress errors that arise on the expression at issue by using PHP's error control operator—i.e. prepending the relevant line with @—however this will suppress all errors raised by that expression, not just E_DEPRECATED ones.

What should you do?

• You are starting a new project.

  There is absolutely no reason to use ext/mysql—choose one of the other, more modern, extensions instead and reap the rewards of the benefits they offer.

• You have (your own) legacy codebase that currently depends upon ext/mysql.

  It would be wise to perform regression testing: you really shouldn't be changing anything (especially upgrading PHP) until you have identified all of the potential areas of impact, planned around each of them and then thoroughly tested your solution in a staging environment.

  • Following good coding practice, your application was developed in a loosely integrated/modular fashion and the database access methods are all self-contained in one place that can easily be swapped out for one of the new extensions.

    Spend half an hour rewriting this module to use one of the other, more modern, extensions; test thoroughly. You can later introduce further refinements to reap the rewards of the benefits they offer.

  • The database access methods are scattered all over the place and cannot easily be swapped out for one of the new extensions.

    Consider whether you really need to upgrade to PHP v5.5 at this time.

    You should begin planning to replace ext/mysql with one of the other, more modern, extensions in order that you can reap the rewards of the benefits they offer; you might also use it as an opportunity to refactor your database access methods into a more modular structure.

    However, if you have an urgent need to upgrade PHP right away, you might consider suppressing deprecation errors for the time being: but first be sure to identify any other deprecation errors that are also being thrown.

• You are using a third party project that depends upon ext/mysql.

  Consider whether you really need to upgrade to PHP v5.5 at this time.

  Check whether the developer has released any fixes, workarounds or guidance in relation to this specific issue; or, if not, pressure them to do so by bringing this matter to their attention. If you have an urgent need to upgrade PHP right away, you might consider suppressing deprecation errors for the time being: but first be sure to identify any other deprecation errors that are also being thrown.

  It is absolutely essential to perform regression testing.

There are two cases in which this error is raised.

1. You didn't declare the variable which is used
2. You didn't create the instances of the class

I really liked the answer of RichieHindle, however I liked the question as an exercise. Here's a brute force implementation using strings:)

import random
first = random.randint(1,9)
first = str(first)
n = 5

nrs = [str(random.randrange(10)) for i in range(n-1)]
for i in range(len(nrs))    :
    first += str(nrs[i])

print str(first)

TCO (Tail Call Optimization) is the process by which a smart compiler can make a call to a function and take no additional stack space. The only situation in which this happens is if the last instruction executed in a function f is a call to a function g (Note: g can be f). The key here is that f no longer needs stack space - it simply calls g and then returns whatever g would return. In this case the optimization can be made that g just runs and returns whatever value it would have to the thing that called f.

This optimization can make recursive calls take constant stack space, rather than explode.

Example: this factorial function is not TCOptimizable:

def fact(n):
    if n == 0:
        return 1
    return n * fact(n-1)

This function does things besides call another function in its return statement.

This below function is TCOptimizable:

def fact_h(n, acc):
    if n == 0:
        return acc
    return fact_h(n-1, acc*n)

def fact(n):
    return fact_h(n, 1)

This is because the last thing to happen in any of these functions is to call another function.

Another way to use key($array) in a foreach loop is by using next($array) at the end of the loop, just make sure each iteration calls the next() function (in case you have complex branching inside the loop)

Use git show, which also shows you the commit message, and defaults to the current commit when given no arguments.

void show() throws Exception
{
    throw new Exception("my.own.Exception");
}

As there is checked exception in show() method , which is not being handled in that method so we use throws keyword for propagating the Exception.

void show2() throws Exception //Why throws is necessary here ?
{
show();
}

Since you are using the show() method in show2() method and you have propagated the exception atleast you should be handling here. If you are not handling the Exception here , then you are using throws keyword. So that is the reason for using throws keyword at the method signature.

I spent some time trying to figure this out due to the update with DateTimePicker. You would enter in a format based off of moment.js documentation. You can use what other answers showed:

$('#datetimepicker').datetimepicker({ format: 'DD/MM/YYYY' });

Or you can use some of the localized formats moment.js provides to do just a date, such as:

$('#datetimepicker').datetimepicker({locale: 'fr', format: 'L' });

Using this, you are able to display only a time (LT) or date (L) based on locale. The documentation for datetimepicker wasn't clear to me that it automatically adapts to the input provided (date or only time) via moment.js format. Hope this helps for those still looking.

C# < 7.1

using default operator

var result = int.TryParse(foo, out var f) ? f : default(int?);

C# >= 7.1

using default literal

var result = int.TryParse(foo, out var f) ? f : default;

_{See C# language versioning to ascertain what language version your project supports}

Sources:

• var
• Int32.TryParse
• conditional operator
• default operator (explained in this stackoverflow post).
• nullable value type

Hope this coding will helps you :)

plot(x,y,xaxt = 'n')

axis(side=1,at=c(1,20,30,50),labels=c("1975","1980","1985","1990"))

As of Mac OS X Lion 10.7, Terminal includes exactly this functionality as a Service. As with most Services, these are disabled by default, so you'll need to enable this to make it appear in the Services menu.

System Preferences > Keyboard > Shortcuts > Services

Enable New Terminal at Folder. There's also New Terminal Tab at Folder, which will create a tab in the frontmost Terminal window (if any, else it will create a new window). These Services work in all applications, not just Finder, and they operate on folders as well as absolute pathnames selected in text.

You can even assign command keys to them.

Services appear in the Services submenu of each application menu, and within the contextual menu (Control-Click or Right-Click on a folder or pathname).

The New Terminal at Folder service will become active when you select a folder in Finder. You cannot simply have the folder open and run the service "in place". Go back to the parent folder, select the relevant folder, then activate the service via the Services menu or context menu.

In addition, Lion Terminal will open a new terminal window if you drag a folder (or pathname) onto the Terminal application icon, and you can also drag to the tab bar of an existing window to create a new tab.

Finally, if you drag a folder or pathname onto a tab (in the tab bar) and the foreground process is the shell, it will automatically execute a "cd" command. (Dragging into the terminal view within the tab merely inserts the pathname on its own, as in older versions of Terminal.)

You can also do this from the command line or a shell script:

open -a Terminal /path/to/folder

This is the command-line equivalent of dragging a folder/pathname onto the Terminal application icon.

On a related note, Lion Terminal also has new Services for looking up man pages: Open man page in Terminal displays the selected man page topic in a new terminal window, and Search man Pages in Terminal performs "apropos" on the selected text. The former also understands man page references ("open(2)"), man page command line arguments ("2 open") and man page URLs ("x-man-page://2/open").

I ended up doing this

typeof ($('#mySelector').data('events').click) == "object"

IIRC, the ConfigurationManager.RefreshSection requires a string parameter specifying the name of the Section to refresh :

ConfigurationManager.RefreshSection("connectionStrings");

I think that the ASP.NET application should automatically reload when the ConnectionStrings element is modified and the configuration does not need to be manually reloaded.

Add !important rule to display: table of your .v-center class.

.v-center {
    display:table !important;
    border:2px solid gray;
    height:300px;
}

Your display property is being overridden by bootstrap to display: block.

Example

From your screenshot it appears you have ReSharper installed.

Depending on the key binding options you chose when you installed it, some of your standard shortcuts may now be redirected to ReSharper commands. It's worth checking, for example Ctrl+E, C is used by R# for the code cleanup dialog.

OK - str to float.

package test;

import java.text.DecimalFormat;

public class TestPtz {
  public static void main(String[] args) {
    String preset0 = "0.09,0.20,0.09,0.07";
    String[] thisto = preset0.split(",");    
    float a = (Float.valueOf(thisto[0])).floatValue();
    System.out.println("[Original]: " + a);   
    a = (float) (a + 0.01);

    // Part 1 - for display / debug
    System.out.printf("[Local]: %.2f \n", a);
    // Part 2 - when value requires to be send as it is
    DecimalFormat df = new DecimalFormat();
    df.setMinimumFractionDigits(2);
    df.setMaximumFractionDigits(2);
    System.out.println("[Remote]: " + df.format(a));

  }
}

Output:

run:
[Original]: 0.09
[Local]: 0.10 
[Remote]: 0.10
BUILD SUCCESSFUL (total time: 0 seconds)

After some time with Google I asked on the ask ubuntu chat room.

A user there was king enough to help me find the solution I was looking for and i wanted to share so that any following suers running into this may find it:

grep -P "(^|\s)abc(\s|$)" gives the result I was looking for. -P is an experimental implementation of perl regexps.

grepping for abc and then using filters like grep -v '@abc' (this is far from perfect...) should also work, but my patch does something similar.

Please check the compatibility. I struggled with mvn 3.2.1 and jdk 1.6.0_37 for many hours. All variables were set but was not working. Finally I upgraded jdk to 1.8.0_60 and mvn 3.3.3 and that worked. Environment Variables as following:

JAVA_HOME=C:\ProgramFiles\Java\jdk1.8.0_60 
MVN_HOME=C:\ProgramFiles\apache-maven\apache-maven-3.3.3 
M2=%MVN_HOME%\bin extend system level Path- ;%M2%;%JAVA_HOME%\bin;

You can use AJAX for that. Whenever you scan a barcode, your scanner will act as if it is a keyboard typing into your input type="text" components. With JavaScript, capture the corresponding event, and send HTTP REQUEST and process responses accordingly.

Edit : for an in-depth understanding of the mental model of decorators, take a look at this awesome Pycon Talk. well worth the 30 minutes.

One way of thinking about decorators with arguments is

@decorator
def foo(*args, **kwargs):
    pass

translates to

foo = decorator(foo)

So if the decorator had arguments,

@decorator_with_args(arg)
def foo(*args, **kwargs):
    pass

translates to

foo = decorator_with_args(arg)(foo)

decorator_with_args is a function which accepts a custom argument and which returns the actual decorator (that will be applied to the decorated function).

I use a simple trick with partials to make my decorators easy

from functools import partial

def _pseudo_decor(fun, argument):
    def ret_fun(*args, **kwargs):
        #do stuff here, for eg.
        print ("decorator arg is %s" % str(argument))
        return fun(*args, **kwargs)
    return ret_fun

real_decorator = partial(_pseudo_decor, argument=arg)

@real_decorator
def foo(*args, **kwargs):
    pass

Update:

Above, foo becomes real_decorator(foo)

One effect of decorating a function is that the name foo is overridden upon decorator declaration. foo is "overridden" by whatever is returned by real_decorator. In this case, a new function object.

All of foo's metadata is overridden, notably docstring and function name.

>>> print(foo)
<function _pseudo_decor.<locals>.ret_fun at 0x10666a2f0>

functools.wraps gives us a convenient method to "lift" the docstring and name to the returned function.

from functools import partial, wraps

def _pseudo_decor(fun, argument):
    # magic sauce to lift the name and doc of the function
    @wraps(fun)
    def ret_fun(*args, **kwargs):
        # pre function execution stuff here, for eg.
        print("decorator argument is %s" % str(argument))
        returned_value =  fun(*args, **kwargs)
        # post execution stuff here, for eg.
        print("returned value is %s" % returned_value)
        return returned_value

    return ret_fun

real_decorator1 = partial(_pseudo_decor, argument="some_arg")
real_decorator2 = partial(_pseudo_decor, argument="some_other_arg")

@real_decorator1
def bar(*args, **kwargs):
    pass

>>> print(bar)
<function __main__.bar(*args, **kwargs)>

>>> bar(1,2,3, k="v", x="z")
decorator argument is some_arg
returned value is None

Late but wanted to add a new one with more keyframes ... here is an example on CodePen since there was an issue with the built-in code snippets:

.block{_x000D_
  display:inline-block;_x000D_
  padding:30px 50px;_x000D_
  background:#000;_x000D_
}_x000D_
.flash-me {_x000D_
  color:#fff;_x000D_
  font-size:40px;_x000D_
  -webkit-animation: flash linear 1.7s infinite;_x000D_
  animation: flash linear 1.7s infinite;_x000D_
}_x000D_
_x000D_
@-webkit-keyframes flash {_x000D_
  0% { opacity: 0; } _x000D_
  80% { opacity: 1; color:#fff; } _x000D_
  83% { opacity: 0; color:#fff; } _x000D_
  86% { opacity: 1; color:#fff;}  _x000D_
  89% { opacity: 0} _x000D_
  92% { opacity: 1; color:#fff;} _x000D_
  95% { opacity: 0; color:#fff;}_x000D_
  100% { opacity: 1; color:#fff;}_x000D_
}_x000D_
@keyframes flash {_x000D_
  0% { opacity: 0; } _x000D_
  80% { opacity: 1; color:#fff; } _x000D_
  83% { opacity: 0; color:#fff; } _x000D_
  86% { opacity: 1; color:#fff;}  _x000D_
  89% { opacity: 0} _x000D_
  92% { opacity: 1; color:#fff;} _x000D_
  95% { opacity: 0; color:#fff;}_x000D_
  100% { opacity: 1; color:#fff;}_x000D_
}

<span class="block">_x000D_
  <span class="flash-me">Flash Me Hard</span>_x000D_
</span>