It's often the good idea to rely on standard library provided solution:

private static void stackOverflow15554296()
    throws
        NoSuchAlgorithmException, NoSuchPaddingException,        
        InvalidKeyException, IllegalBlockSizeException,
        BadPaddingException
{

    // prepare key
    KeyGenerator keygen = KeyGenerator.getInstance("AES");
    SecretKey aesKey = keygen.generateKey();
    String aesKeyForFutureUse = Base64.getEncoder().encodeToString(
            aesKey.getEncoded()
    );

    // cipher engine
    Cipher aesCipher = Cipher.getInstance("AES/ECB/PKCS5Padding");

    // cipher input
    aesCipher.init(Cipher.ENCRYPT_MODE, aesKey);
    byte[] clearTextBuff = "Text to encode".getBytes();
    byte[] cipherTextBuff = aesCipher.doFinal(clearTextBuff);

    // recreate key
    byte[] aesKeyBuff = Base64.getDecoder().decode(aesKeyForFutureUse);
    SecretKey aesDecryptKey = new SecretKeySpec(aesKeyBuff, "AES");

    // decipher input
    aesCipher.init(Cipher.DECRYPT_MODE, aesDecryptKey);
    byte[] decipheredBuff = aesCipher.doFinal(cipherTextBuff);
    System.out.println(new String(decipheredBuff));
}

This prints "Text to encode".

Solution is based on Java Cryptography Architecture Reference Guide and https://stackoverflow.com/a/20591539/146745 answer.

@owlstead, regarding your request for "a cryptographically secure variant of one of the given answers," please see RNCryptor. It was designed to do exactly what you're requesting (and was built in response to the problems with the code listed here).

RNCryptor uses PBKDF2 with salt, provides a random IV, and attaches HMAC (also generated from PBKDF2 with its own salt. It support synchronous and asynchronous operation.

Consider using Encryptor4j of which I am the author.

First make sure you have Unlimited Strength Jurisdiction Policy files installed before your proceed so that you can use 256-bit AES keys.

Then do the following:

String password = "mysupersecretpassword"; 
Key key = KeyFactory.AES.keyFromPassword(password.toCharArray());
Encryptor encryptor = new Encryptor(key, "AES/CBC/PKCS7Padding", 16);

You can now use the encryptor to encrypt your message. You can also perform streaming encryption if you'd like. It automatically generates and prepends a secure IV for your convenience.

If it's a file that you wish to compress take a look at this answer Encrypting a large file with AES using JAVA for an even simpler approach.

Things to know in general:

1. Key != Password
   • SecretKeySpec expects a key, not a password. See below
2. It might be due to a policy restriction that prevents using 32 byte keys. See other answer on that

In your case

The problem is number 1: you are passing the password instead of the key.

AES only supports key sizes of 16, 24 or 32 bytes. You either need to provide exactly that amount or you derive the key from what you type in.

There are different ways to derive the key from a passphrase. Java provides a PBKDF2 implementation for such a purpose.

I used erickson's answer to paint a complete picture (only encryption, since the decryption is similar, but includes splitting the ciphertext):

SecureRandom random = new SecureRandom();
byte[] salt = new byte[16];
random.nextBytes(salt);

KeySpec spec = new PBEKeySpec("password".toCharArray(), salt, 65536, 256); // AES-256
SecretKeyFactory f = SecretKeyFactory.getInstance("PBKDF2WithHmacSHA1");
byte[] key = f.generateSecret(spec).getEncoded();
SecretKeySpec keySpec = new SecretKeySpec(key, "AES");

byte[] ivBytes = new byte[16];
random.nextBytes(ivBytes);
IvParameterSpec iv = new IvParameterSpec(ivBytes);

Cipher c = Cipher.getInstance("AES/CBC/PKCS5Padding");
c.init(Cipher.ENCRYPT_MODE, keySpec, iv);
byte[] encValue = c.doFinal(valueToEnc.getBytes());

byte[] finalCiphertext = new byte[encValue.length+2*16];
System.arraycopy(ivBytes, 0, finalCiphertext, 0, 16);
System.arraycopy(salt, 0, finalCiphertext, 16, 16);
System.arraycopy(encValue, 0, finalCiphertext, 32, encValue.length);

return finalCiphertext;

Other things to keep in mind:

• Always use a fully qualified Cipher name. AES is not appropriate in such a case, because different JVMs/JCE providers may use different defaults for mode of operation and padding. Use AES/CBC/PKCS5Padding. Don't use ECB mode, because it is not semantically secure.
• If you don't use ECB mode then you need to send the IV along with the ciphertext. This is usually done by prefixing the IV to the ciphertext byte array. The IV is automatically created for you and you can get it through cipherInstance.getIV().
• Whenever you send something, you need to be sure that it wasn't altered along the way. It is hard to implement a encryption with MAC correctly. I recommend you to use an authenticated mode like CCM or GCM.

All of these schemes, except AES and Blowfish, have known vulnerabilities and should not be used.
However, Blowfish has been replaced by Twofish.

For AES/CBC/PKCS7 encryption/decryption, Just Copy and paste the following code and replace SecretKey and IV with your own.

import java.io.UnsupportedEncodingException;
import java.security.InvalidAlgorithmParameterException;
import java.security.InvalidKeyException;
import java.security.NoSuchAlgorithmException;

import javax.crypto.BadPaddingException;
import javax.crypto.Cipher;
import javax.crypto.IllegalBlockSizeException;
import javax.crypto.NoSuchPaddingException;
import javax.crypto.spec.IvParameterSpec;
import javax.crypto.spec.SecretKeySpec;

import android.util.Base64;


public class CryptoHandler {

    String SecretKey = "xxxxxxxxxxxxxxxxxxxx";
    String IV = "xxxxxxxxxxxxxxxx";

    private static CryptoHandler instance = null;

    public static CryptoHandler getInstance() {

        if (instance == null) {
            instance = new CryptoHandler();
        }
        return instance;
    }

    public String encrypt(String message) throws NoSuchAlgorithmException,
            NoSuchPaddingException, IllegalBlockSizeException,
            BadPaddingException, InvalidKeyException,
            UnsupportedEncodingException, InvalidAlgorithmParameterException {

        byte[] srcBuff = message.getBytes("UTF8");
        //here using substring because AES takes only 16 or 24 or 32 byte of key 
        SecretKeySpec skeySpec = new 
        SecretKeySpec(SecretKey.substring(0,32).getBytes(), "AES");
        IvParameterSpec ivSpec = new 
        IvParameterSpec(IV.substring(0,16).getBytes());
        Cipher ecipher = Cipher.getInstance("AES/CBC/PKCS7Padding");
        ecipher.init(Cipher.ENCRYPT_MODE, skeySpec, ivSpec);
        byte[] dstBuff = ecipher.doFinal(srcBuff);
        String base64 = Base64.encodeToString(dstBuff, Base64.DEFAULT);
        return base64;
    }

    public String decrypt(String encrypted) throws NoSuchAlgorithmException,
            NoSuchPaddingException, InvalidKeyException,
            InvalidAlgorithmParameterException, IllegalBlockSizeException,
            BadPaddingException, UnsupportedEncodingException {

        SecretKeySpec skeySpec = new 
        SecretKeySpec(SecretKey.substring(0,32).getBytes(), "AES");
        IvParameterSpec ivSpec = new 
        IvParameterSpec(IV.substring(0,16).getBytes());
        Cipher ecipher = Cipher.getInstance("AES/CBC/PKCS7Padding");
        ecipher.init(Cipher.DECRYPT_MODE, skeySpec, ivSpec);
        byte[] raw = Base64.decode(encrypted, Base64.DEFAULT);
        byte[] originalBytes = ecipher.doFinal(raw);
        String original = new String(originalBytes, "UTF8");
        return original;
    }
}

If you are using MCRYPT_RIJNDAEL_128, try rtrim($output, "\0\3"). If the length of the string is less than 16, the decrypt function will return a string with length of 16 characters, adding 03 at the end.

You can easily check this, e.g. by trying:

$string = "TheString";
$decrypted_string = decrypt_function($stirng, $key);

echo bin2hex($decrypted_string)."=".bin2hex("TheString");

SHA is a hash function and AES is an encryption standard. Given an input you can use SHA to produce an output which is very unlikely to be produced from any other input. Also, some information is lost while applying the function so even if you knew how to produce an input yielding the same output, that input wouldn't likely be the same one used in the first place. On the other hand AES is meant to protect from disclosure to third parties any data sent between two parties sharing the same encryption key. This means that once you know the encryption key and the output (and the IV...) you can seamlessly get back to the original input. Please notice that SHA doesn't require anything but an input to be applied, while AES requires at least 3 thins: what you're encrypting/decrypting, an encryption key and the initialization vector (IV).

I know one aspect: Although CBC gives better security by changing the IV for each block, it's not applicable to randomly accessed encrypted content (like an encrypted hard disk).

So, use CBC (and the other sequential modes) for sequential streams and ECB for random access.

Using KeyGenerator would be the preferred method. As Duncan indicated, I would certainly give the key size during initialization. KeyFactory is a method that should be used for pre-existing keys.

OK, so lets get to the nitty-gritty of this. In principle AES keys can have any value. There are no "weak keys" as in (3)DES. Nor are there any bits that have a specific meaning as in (3)DES parity bits. So generating a key can be as simple as generating a byte array with random values, and creating a SecretKeySpec around it.

But there are still advantages to the method you are using: the KeyGenerator is specifically created to generate keys. This means that the code may be optimized for this generation. This could have efficiency and security benefits. It might be programmed to avoid a timing side channel attacks that would expose the key, for instance. Note that it may already be a good idea to clear any byte[] that hold key information as they may be leaked into a swap file (this may be the case anyway though).

Furthermore, as said, not all algorithms are using fully random keys. So using KeyGenerator would make it easier to switch to other algorithms. More modern ciphers will only accept fully random keys though; this is seen as a major benefit over e.g. DES.

Finally, and in my case the most important reason, it that the KeyGenerator method is the only valid way of handling AES keys within a secure token (smart card, TPM, USB token or HSM). If you create the byte[] with the SecretKeySpec then the key must come from memory. That means that the key may be put in the secure token, but that the key is exposed in memory regardless. Normally, secure tokens only work with keys that are either generated in the secure token or are injected by e.g. a smart card or a key ceremony. A KeyGenerator can be supplied with a provider so that the key is directly generated within the secure token.

As indicated in Duncan's answer: always specify the key size (and any other parameters) explicitly. Do not rely on provider defaults as this will make it unclear what your application is doing, and each provider may have its own defaults.

I've recently had to bump up against this again in my own project - and wanted to share the somewhat simpler code that I've been using, as this question and series of answers kept coming up in my searches.

I'm not going to get into the security concerns around how often to update things like your Salt and Initialization Vector - that's a topic for a security forum, and there are some great resources out there to look at. This is simply a block of code to implement AesManaged in C#.

using System;
using System.IO;
using System.Security.Cryptography;
using System.Text;

namespace Your.Namespace.Security {
    public static class Cryptography {
        #region Settings

        private static int _iterations = 2;
        private static int _keySize = 256;

        private static string _hash     = "SHA1";
        private static string _salt     = "aselrias38490a32"; // Random
        private static string _vector   = "8947az34awl34kjq"; // Random

        #endregion

        public static string Encrypt(string value, string password) {
            return Encrypt<AesManaged>(value, password);
        }
        public static string Encrypt<T>(string value, string password) 
                where T : SymmetricAlgorithm, new() {
            byte[] vectorBytes = GetBytes<ASCIIEncoding>(_vector);
            byte[] saltBytes = GetBytes<ASCIIEncoding>(_salt);
            byte[] valueBytes = GetBytes<UTF8Encoding>(value);

            byte[] encrypted;
            using (T cipher = new T()) {
                PasswordDeriveBytes _passwordBytes = 
                    new PasswordDeriveBytes(password, saltBytes, _hash, _iterations);
                byte[] keyBytes = _passwordBytes.GetBytes(_keySize / 8);

                cipher.Mode = CipherMode.CBC;

                using (ICryptoTransform encryptor = cipher.CreateEncryptor(keyBytes, vectorBytes)) {
                    using (MemoryStream to = new MemoryStream()) {
                        using (CryptoStream writer = new CryptoStream(to, encryptor, CryptoStreamMode.Write)) {
                            writer.Write(valueBytes, 0, valueBytes.Length);
                            writer.FlushFinalBlock();
                            encrypted = to.ToArray();
                        }
                    }
                }
                cipher.Clear();
            }
            return Convert.ToBase64String(encrypted);
        }

        public static string Decrypt(string value, string password) {
            return Decrypt<AesManaged>(value, password);
        }
        public static string Decrypt<T>(string value, string password) where T : SymmetricAlgorithm, new() {
            byte[] vectorBytes = GetBytes<ASCIIEncoding>(_vector);
            byte[] saltBytes = GetBytes<ASCIIEncoding>(_salt);
            byte[] valueBytes = Convert.FromBase64String(value);

            byte[] decrypted;
            int decryptedByteCount = 0;

            using (T cipher = new T()) {
                PasswordDeriveBytes _passwordBytes = new PasswordDeriveBytes(password, saltBytes, _hash, _iterations);
                byte[] keyBytes = _passwordBytes.GetBytes(_keySize / 8);

                cipher.Mode = CipherMode.CBC;

                try {
                    using (ICryptoTransform decryptor = cipher.CreateDecryptor(keyBytes, vectorBytes)) {
                        using (MemoryStream from = new MemoryStream(valueBytes)) {
                            using (CryptoStream reader = new CryptoStream(from, decryptor, CryptoStreamMode.Read)) {
                                decrypted = new byte[valueBytes.Length];
                                decryptedByteCount = reader.Read(decrypted, 0, decrypted.Length);
                            }
                        }
                    }
                } catch (Exception ex) {
                    return String.Empty;
                }

                cipher.Clear();
            }
            return Encoding.UTF8.GetString(decrypted, 0, decryptedByteCount);
        }

    }
}

The code is very simple to use. It literally just requires the following:

string encrypted = Cryptography.Encrypt(data, "testpass");
string decrypted = Cryptography.Decrypt(encrypted, "testpass");

By default, the implementation uses AesManaged - but you could actually also insert any other SymmetricAlgorithm. A list of the available SymmetricAlgorithm inheritors for .NET 4.5 can be found at:

http://msdn.microsoft.com/en-us/library/system.security.cryptography.symmetricalgorithm.aspx

As of the time of this post, the current list includes:

• AesManaged
• RijndaelManaged
• DESCryptoServiceProvider
• RC2CryptoServiceProvider
• TripleDESCryptoServiceProvider

To use RijndaelManaged with the code above, as an example, you would use:

string encrypted = Cryptography.Encrypt<RijndaelManaged>(dataToEncrypt, password);
string decrypted = Cryptography.Decrypt<RijndaelManaged>(encrypted, password);

I hope this is helpful to someone out there.

JSAES is a powerful implementation of AES in JavaScript. http://point-at-infinity.org/jsaes/

Check out this link it has a example code to encrypt/decrypt data using AES256CBC using EVP API.

https://github.com/saju/misc/blob/master/misc/openssl_aes.c

Also you can check the use of AES256 CBC in a detailed open source project developed by me at https://github.com/llubu/mpro

The code is detailed enough with comments and if you still need much explanation about the API itself i suggest check out this book Network Security with OpenSSL by Viega/Messier/Chandra (google it you will easily find a pdf of this..) read chapter 6 which is specific to symmetric ciphers using EVP API.. This helped me a lot actually understanding the reasons behind using various functions and structures of EVP.

and if you want to dive deep into the Openssl crypto library, i suggest download the code from the openssl website (the version installed on your machine) and then look in the implementation of EVP and aeh api implementation.

One more suggestion from the code you posted above i see you are using the api from aes.h instead use EVP. Check out the reason for doing this here OpenSSL using EVP vs. algorithm API for symmetric crypto nicely explained by Daniel in one of the question asked by me..

This is now no longer needed for Java 9, nor for any recent release of Java 6, 7, or 8. Finally! :)

Per JDK-8170157, the unlimited cryptographic policy is now enabled by default.

Specific versions from the JIRA issue:

• Java 9 (10, 11, etc..): Any official release!
• Java 8u161 or later (Available now)
• Java 7u171 or later (Only available through 'My Oracle Support')
• Java 6u181 or later (Only available through 'My Oracle Support')

Note that if for some odd reason the old behavior is needed in Java 9, it can be set using:

Security.setProperty("crypto.policy", "limited");

MD5, AES, no padding

import static javax.crypto.Cipher.DECRYPT_MODE;
import static javax.crypto.Cipher.ENCRYPT_MODE;
import static org.apache.commons.io.Charsets.UTF_8;
import java.security.InvalidKeyException;
import java.security.Key;
import java.security.MessageDigest;
import java.security.NoSuchAlgorithmException;
import java.util.Base64;
import javax.crypto.BadPaddingException;
import javax.crypto.Cipher;
import javax.crypto.IllegalBlockSizeException;
import javax.crypto.NoSuchPaddingException;
import javax.crypto.spec.SecretKeySpec;

public class PasswordUtils {

    private PasswordUtils() {}

    public static String encrypt(String text, String pass) {
        try {
            MessageDigest messageDigest = MessageDigest.getInstance("MD5");
            Key key = new SecretKeySpec(messageDigest.digest(pass.getBytes(UTF_8)), "AES");
            Cipher cipher = Cipher.getInstance("AES");
            cipher.init(ENCRYPT_MODE, key);

            byte[] encrypted = cipher.doFinal(text.getBytes(UTF_8));
            byte[] encoded = Base64.getEncoder().encode(encrypted);
            return new String(encoded, UTF_8);

        } catch (NoSuchAlgorithmException | NoSuchPaddingException | InvalidKeyException | IllegalBlockSizeException | BadPaddingException e) {
            throw new RuntimeException("Cannot encrypt", e);
        }
    }

    public static String decrypt(String text, String pass) {
        try {
            MessageDigest messageDigest = MessageDigest.getInstance("MD5");
            Key key = new SecretKeySpec(messageDigest.digest(pass.getBytes(UTF_8)), "AES");
            Cipher cipher = Cipher.getInstance("AES");
            cipher.init(DECRYPT_MODE, key);

            byte[] decoded = Base64.getDecoder().decode(text.getBytes(UTF_8));
            byte[] decrypted = cipher.doFinal(decoded);
            return new String(decrypted, UTF_8);

        } catch (NoSuchAlgorithmException | NoSuchPaddingException | InvalidKeyException | IllegalBlockSizeException | BadPaddingException e) {
            throw new RuntimeException("Cannot decrypt", e);
        }
    }
}

It is a not-often-acknowledged fact that the block size of a block cipher is also an important security consideration (though nowhere near as important as the key size).

Blowfish (and most other block ciphers of the same era, like 3DES and IDEA) have a 64 bit block size, which is considered insufficient for the large file sizes which are common these days (the larger the file, and the smaller the block size, the higher the probability of a repeated block in the ciphertext - and such repeated blocks are extremely useful in cryptanalysis).

AES, on the other hand, has a 128 bit block size. This consideration alone is justification to use AES instead of Blowfish.

Try this, a simpler solution.

byte[] salt = "ThisIsASecretKey".getBytes();
Key key = new SecretKeySpec(salt, 0, 16, "AES");

Cipher cipher = Cipher.getInstance("AES");

Try with below code it`s working for me.

AES Encryption

public static String getEncryptedString(String value) {
        try {
          byte[] key = your Key in byte array;
          byte[] input = sault in byte array

            return Base64.encodeToString(encrypt(value.getBytes("UTF-8"), key, input), Base64.DEFAULT);
        } catch (UnsupportedEncodingException e) {
            return "";
        }
    }


 public static byte[] encrypt(byte[] data, byte[] key, byte[] ivs) {
        try {
            Cipher cipher = Cipher.getInstance("AES/CBC/PKCS5Padding");
            SecretKeySpec secretKeySpec = new SecretKeySpec(key, "AES");
            byte[] finalIvs = new byte[16];
            int len = ivs.length > 16 ? 16 : ivs.length;
            System.arraycopy(ivs, 0, finalIvs, 0, len);
            IvParameterSpec ivps = new IvParameterSpec(finalIvs);
            cipher.init(Cipher.ENCRYPT_MODE, secretKeySpec, ivps);
            return cipher.doFinal(data);
        } catch (Exception e) {
            e.printStackTrace();
        }
        return null;
    }

AES DECRYPTION

 public static String decrypt(String encrypted) throws NoSuchAlgorithmException, NoSuchPaddingException, InvalidKeyException, InvalidAlgorithmParameterException, IllegalBlockSizeException, BadPaddingException, UnsupportedEncodingException {

            byte[] key = your Key in byte array;
            byte[] input = sault in byte array


            SecretKeySpec skeySpec = new SecretKeySpec(key, "AES");
            IvParameterSpec ivSpec = new IvParameterSpec(input);
            Cipher ecipher = Cipher.getInstance("AES/CBC/PKCS5Padding");
            ecipher.init(Cipher.DECRYPT_MODE, skeySpec, ivSpec);
            byte[] raw = Base64.decode(encrypted, Base64.DEFAULT);
            byte[] originalBytes = ecipher.doFinal(raw);
            String original = new String(originalBytes, "UTF8");
            return original;
        }

public class AesCryptoService
{
    private static byte[] Key = Encoding.ASCII.GetBytes(@"qwr{@^h`h&_`50/ja9!'dcmh3!uw<&=?");
    private static byte[] IV = Encoding.ASCII.GetBytes(@"9/\~V).A,lY&=t2b");


    public static string EncryptStringToBytes_Aes(string plainText)
    {
        if (plainText == null || plainText.Length <= 0)
            throw new ArgumentNullException("plainText");
        if (Key == null || Key.Length <= 0)
            throw new ArgumentNullException("Key");
        if (IV == null || IV.Length <= 0)
            throw new ArgumentNullException("IV");
        byte[] encrypted;


        using (AesCryptoServiceProvider aesAlg = new AesCryptoServiceProvider())
        {
            aesAlg.Key = Key;
            aesAlg.IV = IV;
            aesAlg.Mode = CipherMode.CBC;
            aesAlg.Padding = PaddingMode.PKCS7;

            ICryptoTransform encryptor = aesAlg.CreateEncryptor(aesAlg.Key, aesAlg.IV);

            using (MemoryStream msEncrypt = new MemoryStream())
            {
                using (CryptoStream csEncrypt = new CryptoStream(msEncrypt, encryptor, CryptoStreamMode.Write))
                {
                    using (StreamWriter swEncrypt = new StreamWriter(csEncrypt))
                    {
                        swEncrypt.Write(plainText);
                    }
                    encrypted = msEncrypt.ToArray();
                }
            }
        }
        
        return Convert.ToBase64String(encrypted);
    }


    
    public static string DecryptStringFromBytes_Aes(string Text)
    {
        if (Text == null || Text.Length <= 0)
            throw new ArgumentNullException("cipherText");
        if (Key == null || Key.Length <= 0)
            throw new ArgumentNullException("Key");
        if (IV == null || IV.Length <= 0)
            throw new ArgumentNullException("IV");

        string plaintext = null;
        byte[] cipherText = Convert.FromBase64String(Text.Replace(' ', '+'));

        using (AesCryptoServiceProvider aesAlg = new AesCryptoServiceProvider())
        {
            aesAlg.Key = Key;
            aesAlg.IV = IV;
            aesAlg.Mode = CipherMode.CBC;
            aesAlg.Padding = PaddingMode.PKCS7;


            ICryptoTransform decryptor = aesAlg.CreateDecryptor(aesAlg.Key, aesAlg.IV);

            using (MemoryStream msDecrypt = new MemoryStream(cipherText))
            {
                using (CryptoStream csDecrypt = new CryptoStream(msDecrypt, decryptor, CryptoStreamMode.Read))
                {
                    using (StreamReader srDecrypt = new StreamReader(csDecrypt))
                    {
                        plaintext = srDecrypt.ReadToEnd();
                    }
                }
            }

        }

        return plaintext;
    }
}

Official document of Crypto++ AES is a good start. And from my archive, a basic implementation of AES is as follows:

Please refer here with more explanation, I recommend you first understand the algorithm and then try to understand each line step by step.

#include <iostream>
#include <iomanip>

#include "modes.h"
#include "aes.h"
#include "filters.h"

int main(int argc, char* argv[]) {

    //Key and IV setup
    //AES encryption uses a secret key of a variable length (128-bit, 196-bit or 256-   
    //bit). This key is secretly exchanged between two parties before communication   
    //begins. DEFAULT_KEYLENGTH= 16 bytes
    CryptoPP::byte key[ CryptoPP::AES::DEFAULT_KEYLENGTH ], iv[ CryptoPP::AES::BLOCKSIZE ];
    memset( key, 0x00, CryptoPP::AES::DEFAULT_KEYLENGTH );
    memset( iv, 0x00, CryptoPP::AES::BLOCKSIZE );

    //
    // String and Sink setup
    //
    std::string plaintext = "Now is the time for all good men to come to the aide...";
    std::string ciphertext;
    std::string decryptedtext;

    //
    // Dump Plain Text
    //
    std::cout << "Plain Text (" << plaintext.size() << " bytes)" << std::endl;
    std::cout << plaintext;
    std::cout << std::endl << std::endl;

    //
    // Create Cipher Text
    //
    CryptoPP::AES::Encryption aesEncryption(key, CryptoPP::AES::DEFAULT_KEYLENGTH);
    CryptoPP::CBC_Mode_ExternalCipher::Encryption cbcEncryption( aesEncryption, iv );

    CryptoPP::StreamTransformationFilter stfEncryptor(cbcEncryption, new CryptoPP::StringSink( ciphertext ) );
    stfEncryptor.Put( reinterpret_cast<const unsigned char*>( plaintext.c_str() ), plaintext.length() );
    stfEncryptor.MessageEnd();

    //
    // Dump Cipher Text
    //
    std::cout << "Cipher Text (" << ciphertext.size() << " bytes)" << std::endl;

    for( int i = 0; i < ciphertext.size(); i++ ) {

        std::cout << "0x" << std::hex << (0xFF & static_cast<CryptoPP::byte>(ciphertext[i])) << " ";
    }

    std::cout << std::endl << std::endl;

    //
    // Decrypt
    //
    CryptoPP::AES::Decryption aesDecryption(key, CryptoPP::AES::DEFAULT_KEYLENGTH);
    CryptoPP::CBC_Mode_ExternalCipher::Decryption cbcDecryption( aesDecryption, iv );

    CryptoPP::StreamTransformationFilter stfDecryptor(cbcDecryption, new CryptoPP::StringSink( decryptedtext ) );
    stfDecryptor.Put( reinterpret_cast<const unsigned char*>( ciphertext.c_str() ), ciphertext.size() );
    stfDecryptor.MessageEnd();

    //
    // Dump Decrypted Text
    //
    std::cout << "Decrypted Text: " << std::endl;
    std::cout << decryptedtext;
    std::cout << std::endl << std::endl;

    return 0;
}

For installation details :

• How do I install Crypto++ in Visual Studio 2010 Windows 7?
• *nix environment
• For Ubuntu I did:

sudo apt-get install libcrypto++-dev libcrypto++-doc libcrypto++-utils

Something like this:

var option = document.createElement("option");
option.text = "Text";
option.value = "myvalue";
var select = document.getElementById("id-to-my-select-box");
select.appendChild(option);

 var url = Regex.Match(url, @"(http:|https:)\/\/(.*?)\/");

INPUT = "https://stackoverflow.com/questions/";

OUTPUT = "https://stackoverflow.com/";

Ok for the adapter FragmentStatePagerAdapter I fund a solution :

in your FragmentActivity :

ActionBar mActionBar = getSupportActionBar(); 
mActionBar.addTab(mActionBar.newTab().setText("TAB1").setTabListener(this).setTag(Fragment.instantiate(this, MyFragment1.class.getName())));
mActionBar.addTab(mActionBar.newTab().setText("TAB2").setTabListener(this).setTag(Fragment.instantiate(this, MyFragment2.class.getName())));
mActionBar.addTab(mActionBar.newTab().setText("TAB3").setTabListener(this).setTag(Fragment.instantiate(this, MyFragment3.class.getName())));

viewPager = (STViewPager) super.findViewById(R.id.viewpager);
mPagerAdapter = new MyPagerAdapter(getSupportFragmentManager(), mActionBar);
viewPager.setAdapter(this.mPagerAdapter);

and create a methode in your class FragmentActivity - So that method give you access to your Fragment, you just need to give it the position of the fragment you want:

public Fragment getActiveFragment(int position) {
String name = MyPagerAdapter.makeFragmentName(position);
return getSupportFragmentManager().findFragmentByTag(name);
}

in your Adapter :

public class MyPagerAdapter extends FragmentStatePagerAdapter {

private final ActionBar actionBar;
private final FragmentManager fragmentManager;

public MyPagerAdapter(FragmentManager fragmentManager, com.actionbarsherlock.app.ActionBarActionBar mActionBar) {super(fragmentManager);
this.actionBar = mActionBar;
this.fragmentManager = fragmentManager;
}

@Override
public Fragment getItem(int position) {
getSupportFragmentManager().beginTransaction().add(mTchatDetailsFragment, makeFragmentName(position)).commit();
return (Fragment)this.actionBar.getTabAt(position);
}

@Override
public int getCount() {
return this.actionBar.getTabCount();
}

@Override
public CharSequence getPageTitle(int position) {
return this.actionBar.getTabAt(position).getText();
}

private static String makeFragmentName(int viewId, int index) {
return "android:fragment:" + index;
}

}

Why didn't it work for you using Deferred Objects? Unless I misunderstood something this may work for you.

/* AJAX success handler */
var echo = function() {
    console.log('Pass1');
};

var pass = function() {
  $.when(
    /* AJAX requests */
    $.post("/echo/json/", { delay: 1 }, echo),
    $.post("/echo/json/", { delay: 2 }, echo),
    $.post("/echo/json/", { delay: 3 }, echo)
  ).then(function() {
    /* Run after all AJAX */
    console.log('Pass2');
  });
};?

See it here.

UPDATE

Based on your input it seems what your quickest alternative is to use synchronous requests. You can set the property async to false in your $.ajax requests to make them blocking. This will hang your browser until the request is finished though.

Notice I don't recommend this and I still consider you should fix your code in an event-based workflow to not depend on it.

This issue usually appears when one of your variables has no value or when you forget to add "!" to force this variable to store nil until it is set.

In your case the problem is here:

var delegate: AppDelegate

It should be defined as var delegate: AppDelegate! to make it an optional that stores nil and do not unwrap the variable until the value is used.

It is sad that Xcode highlights the whole class as an error instead of highlighting the particular line of code that caused it, so it takes a while to figure it out.

Making changes as below and redeploying on server content type as

Response.ContentType = "application/octet-stream";

This worked for me.

Response.Clear(); 
Response.AddHeader("Content-Disposition", "attachment; filename=" + file.Name); 
Response.AddHeader("Content-Length", file.Length.ToString()); 
Response.ContentType = "application/octet-stream"; 
Response.WriteFile(file.FullName); 
Response.End();

First of all, always use re.compile() before performing any RegEx operation in a loop because it works faster than normal operation.

so for your problem first compile the pattern and then perform action on it.

import re
DATA = "Hey, you - what are you doing here!?"
reg_tok = re.compile("[\w']+")
print reg_tok.findall(DATA)

You can do this using cross apply

SELECT c.BalanceDue AS BalanceDue
FROM Invoices
cross apply (select (InvoiceTotal - PaymentTotal - CreditTotal) as BalanceDue) as c
WHERE  c.BalanceDue  > 0;

Have a look at config.sample.inc.php: you will find examples of the configuration directives that you should copy to your config.inc.php (copy the missing ones). Then, have a look at examples/create_tables.sql which will help you create the missing tables.

The complete documentation for this is available at http://docs.phpmyadmin.net/en/latest/setup.html#phpmyadmin-configuration-storage.

if you want to combine the 4 bytes into a single int you need to do

int i= (rno[0]<<24)&0xff000000|
       (rno[1]<<16)&0x00ff0000|
       (rno[2]<< 8)&0x0000ff00|
       (rno[3]<< 0)&0x000000ff;

I use 3 special operators | is the bitwise logical OR & is the logical AND and << is the left shift

in essence I combine the 4 8-bit bytes into a single 32 bit int by shifting the bytes in place and ORing them together

I also ensure any sign promotion won't affect the result with & 0xff

From the code that you have provided, not knowing the language that you are programming in. The variable capital is null. When you are trying to read the property length, the system cant as it is trying to deference a null variable. You need to define capital.

Solved myself. Done some small structural changes also. Route from Component1 to Component2 is done by a single <router-outlet>. Component2 to Comonent3 and Component4 is done by multiple <router-outlet name= "xxxxx"> The resulting contents are :

Component1.html

<nav>
    <a routerLink="/two" class="dash-item">Go to 2</a>
</nav>
    <router-outlet></router-outlet>

Component2.html

 <a [routerLink]="['/two', {outlets: {'nameThree': ['three']}}]">In Two...Go to 3 ...       </a>
 <a [routerLink]="['/two', {outlets: {'nameFour': ['four']}}]">   In Two...Go to 4 ...</a>

 <router-outlet name="nameThree"></router-outlet>
 <router-outlet name="nameFour"></router-outlet>

The '/two' represents the parent component and ['three']and ['four'] represents the link to the respective children of component2 . Component3.html and Component4.html are the same as in the question.

router.module.ts

const routes: Routes = [
{
    path: '',
    redirectTo: 'one',
    pathMatch: 'full'
},
{
    path: 'two',
    component: ClassTwo, children: [

        {
            path: 'three',
            component: ClassThree,
            outlet: 'nameThree'
        },
        {
            path: 'four',
            component: ClassFour,
            outlet: 'nameFour'
        }
    ]
},];

To add some clarification here, when you create your service, the service class uses the default 'wsdlLocation', which was inserted into it when the class was built from the wsdl. So if you have a service class called SomeService, and you create an instance like this:

SomeService someService = new SomeService();

If you look inside SomeService, you will see that the constructor looks like this:

public SomeService() {
        super(__getWsdlLocation(), SOMESERVICE_QNAME);
}

So if you want it to point to another URL, you just use the constructor that takes a URL argument (there are 6 constructors for setting qname and features as well). For example, if you have set up a local TCP/IP monitor that is listening on port 9999, and you want to redirect to that URL:

URL newWsdlLocation = new URL("http://theServerName:9999/somePath");
SomeService someService = new SomeService(newWsdlLocation);

and that will call this constructor inside the service:

public SomeService(URL wsdlLocation) {
    super(wsdlLocation, SOMESERVICE_QNAME);
}

You could do this :

hr {_x000D_
  border: 1px solid red;_x000D_
}

<hr />_x000D_
This s a test_x000D_
<hr />

Override onDestroy of the Activity and Dismiss your Dialog & make it null

protected void onDestroy ()
    {
        if(mProgressDialog != null)
            if(mProgressDialog.isShowing())
                mProgressDialog.dismiss();
        mProgressDialog= null;
    }

Worth knowing:

If you are running an ENTRYPOINT script ... the script will work with the shebang

#!/bin/bash -x

But will stop the container from stopping with

#!/bin/bash -xe

Basic :

CREATE TABLE table1 (
    columnA INTEGER NOT NULL,
    columnB INTEGER NOT NULL,
    PRIMARY KEY (columnA, columnB)
);

If your columns are foreign keys of other tables (common case) :

CREATE TABLE table1 (
    table2_id INTEGER NOT NULL,
    table3_id INTEGER NOT NULL,
    FOREIGN KEY (table2_id) REFERENCES table2(id),
    FOREIGN KEY (table3_id) REFERENCES table3(id),
    PRIMARY KEY (table2_id, table3_id)
);

CREATE TABLE table2 (
    id INTEGER NOT NULL,
    PRIMARY KEY id
);

CREATE TABLE table3 (
    id INTEGER NOT NULL,
    PRIMARY KEY id
);

Ok I'll share this option. This is a pretty performant option - it uses an array internally - and reuses entries. It's thread safe - and you can retrieve the contents as a List.

static class FixedSizeCircularReference<T> {
    T[] entries

    FixedSizeCircularReference(int size) {
        this.entries = new Object[size] as T[]
        this.size = size
    }
    int cur = 0
    int size

    synchronized void add(T entry) {
        entries[cur++] = entry
        if (cur >= size) {
            cur = 0
        }
    }

    List<T> asList() {
        int c = cur
        int s = size
        T[] e = entries.collect() as T[]
        List<T> list = new ArrayList<>()
        int oldest = (c == s - 1) ? 0 : c
        for (int i = 0; i < e.length; i++) {
            def entry = e[oldest + i < s ? oldest + i : oldest + i - s]
            if (entry) list.add(entry)
        }
        return list
    }
}

I got this from using a custom component inside a <Card.Text> section of a <Card> component in React. None of my components were in p tags

The latest version of Genymotion (2.10.0 onwards) now allows you to install GApps from the emulator toolbar:

Click the GApps button the toolbar

Accept the Terms and Conditions

Your download of google apps will then begin

Once the download is complete simply restart the virtual device!

Ranges from -9,223,372,036,854,775,808 to +9,223,372,036,854,775,807.

It will start from -9,223,372,036,854,775,808

Long.MIN_VALUE.

You can't do it with client side script only... you could make an AJAX call to some server side code that will send an email...

/*link*/
$q.when(scope.regions).then(function(result) {
    console.log(result);
});

var Regions = $resource('mocks/regions.json');
$scope.regions = Regions.query().$promise.then(function(response) {
    return response;
});

I had a similar problem, for me I had to create a new user with name that I needed, in your case you should create some like this:

USE [master]

GO

/****** Object:  Login [Manoj_2]    Script Date: 9/5/2019 12:16:14 PM ******/
CREATE LOGIN [Manoj_2] FROM WINDOWS WITH DEFAULT_DATABASE=[master],
DEFAULT_LANGUAGE=[us_english]

GO

ALTER SERVER ROLE [sysadmin] ADD MEMBER [Manoj_2]
GO

Since the other posts say everything (and I stumbled upon this post while looking for the following).
Here is a way how to execute a python script from another python script:

Python 2:

execfile("somefile.py", global_vars, local_vars)

Python 3:

with open("somefile.py") as f:
    code = compile(f.read(), "somefile.py", 'exec')
    exec(code, global_vars, local_vars)

and you can supply args by providing some other sys.argv

Here's some tested code using Java's URL class. I'd recommend do a better job than I do here of handling the exceptions or passing them up the call stack, though.

public static void main(String[] args) {
    URL url;
    InputStream is = null;
    BufferedReader br;
    String line;

    try {
        url = new URL("http://stackoverflow.com/");
        is = url.openStream();  // throws an IOException
        br = new BufferedReader(new InputStreamReader(is));

        while ((line = br.readLine()) != null) {
            System.out.println(line);
        }
    } catch (MalformedURLException mue) {
         mue.printStackTrace();
    } catch (IOException ioe) {
         ioe.printStackTrace();
    } finally {
        try {
            if (is != null) is.close();
        } catch (IOException ioe) {
            // nothing to see here
        }
    }
}

You can also use the AddRange method

listBox1.Items.AddRange(myList.ToArray());

The reason is the browser can not understand it and try to somehow translate it to what it can understand and in this case into a hexadecimal value!...

chucknorris starts with c which is recognised character in hexadecimal, also it's converting all unrecognised characters into 0!

So chucknorris in hexadecimal format becomes: c00c00000000, all other characters become 0 and c remains where they are...

Now they get divided by 3 for RGB(red, green, blue)... R: c00c, G: 0000, B:0000...

But we know valid hexadecimal for RGB is just 2 characters, means R: c0, G: 00, B:00

So the real result is:

bgcolor="#c00000";

I also added the steps in the image as a quick reference for you:

Reply to abccd and Question to anyone:

The command: C:\Python34\Scripts>py -3 -m pip install pandas executed just fine. Unfortunately, I can't import Pandas.

Directory path: C:\users\myname\downloads\miniconda3\lib\site-packages

My Question: How is it that Pandas' dependency packages(numpy, python-dateutil, pytz, six) also having the same above directory path are able to import just fine but Pandas does not?

import pandas

Traceback (most recent call last):
  File "<pyshell#9>", line 1, in <module>
    import pandas
ImportError: No module named 'pandas'

I finally got Pandas reinstalled and imported with the help of the following web pages: *http://pandas.pydata.org/pandas-docs/stable/pandas.pdf (Pages 403 and 404 of 2215 ... 2.2.2 Installing Pandas with Miniconda) *https://conda.io/docs/user-guide/install/download.html *https://conda.io/docs/user-guide/getting-started.html

After installing Miniconda, I created a new environment area to get Pandas reinstalled and imported. This new environment included the current Python version 3.6.3. I could not import Pandas using Python 3.4.4.

<form method='post' id='userform' action='thisform.php'> <tr>
    <td>Trouble Type</td>
    <td>
    <input type='checkbox' name='checkboxvar[]' value='Option One'>1<br>
    <input type='checkbox' name='checkboxvar[]' value='Option Two'>2<br>
    <input type='checkbox' name='checkboxvar[]' value='Option Three'>3
    </td> </tr> </table> <input type='submit' class='buttons'> </form>

<?php 
if (isset($_POST['checkboxvar'])) 
{
    print_r($_POST['checkboxvar']); 
}
?>

You pass the form name as an array and then you can access all checked boxes using the var itself which would then be an array.

To echo checked options into your email you would then do this:

echo implode(',', $_POST['checkboxvar']); // change the comma to whatever separator you want

Please keep in mind you should always sanitize your input as needed.

For the record, official docs on this exist: http://php.net/manual/en/faq.html.php#faq.html.arrays

These articles seem to suggest that checking for 1.5 or 1.6 prefix should work, as it follows proper version naming convention.

Sun Technical Articles

• J2SE SDK/JRE Version String Naming Convention
• Version 1.5.0 or 5.0?
  • "J2SE also keeps the version number 1.5.0 (or 1.5) in some places that are visible only to developers, or where the version number is parsed by programs"
    • "java.version system property"
• Version 1.6.0 Used by Developers
  • "Java SE keeps the version number 1.6.0 (or 1.6) in some places that are visible only to developers, or where the version number is parsed by programs."
    • "java.version system property"

In addition to given answer, it's worth noting that compiler is not required to initialize constexpr variable at compile time, knowing that the difference between constexpr and static constexpr is that to use static constexpr you ensure the variable is initialized only once.

Following code demonstrates how constexpr variable is initialized multiple times (with same value though), while static constexpr is surely initialized only once.

In addition the code compares the advantage of constexpr against const in combination with static.

#include <iostream>
#include <string>
#include <cassert>
#include <sstream>

const short const_short = 0;
constexpr short constexpr_short = 0;

// print only last 3 address value numbers
const short addr_offset = 3;

// This function will print name, value and address for given parameter
void print_properties(std::string ref_name, const short* param, short offset)
{
    // determine initial size of strings
    std::string title = "value \\ address of ";
    const size_t ref_size = ref_name.size();
    const size_t title_size = title.size();
    assert(title_size > ref_size);

    // create title (resize)
    title.append(ref_name);
    title.append(" is ");
    title.append(title_size - ref_size, ' ');

    // extract last 'offset' values from address
    std::stringstream addr;
    addr << param;
    const std::string addr_str = addr.str();
    const size_t addr_size = addr_str.size();
    assert(addr_size - offset > 0);

    // print title / ref value / address at offset
    std::cout << title << *param << " " << addr_str.substr(addr_size - offset) << std::endl;
}

// here we test initialization of const variable (runtime)
void const_value(const short counter)
{
    static short temp = const_short;
    const short const_var = ++temp;
    print_properties("const", &const_var, addr_offset);

    if (counter)
        const_value(counter - 1);
}

// here we test initialization of static variable (runtime)
void static_value(const short counter)
{
    static short temp = const_short;
    static short static_var = ++temp;
    print_properties("static", &static_var, addr_offset);

    if (counter)
        static_value(counter - 1);
}

// here we test initialization of static const variable (runtime)
void static_const_value(const short counter)
{
    static short temp = const_short;
    static const short static_var = ++temp;
    print_properties("static const", &static_var, addr_offset);

    if (counter)
        static_const_value(counter - 1);
}

// here we test initialization of constexpr variable (compile time)
void constexpr_value(const short counter)
{
    constexpr short constexpr_var = constexpr_short;
    print_properties("constexpr", &constexpr_var, addr_offset);

    if (counter)
        constexpr_value(counter - 1);
}

// here we test initialization of static constexpr variable (compile time)
void static_constexpr_value(const short counter)
{
    static constexpr short static_constexpr_var = constexpr_short;
    print_properties("static constexpr", &static_constexpr_var, addr_offset);

    if (counter)
        static_constexpr_value(counter - 1);
}

// final test call this method from main()
void test_static_const()
{
    constexpr short counter = 2;

    const_value(counter);
    std::cout << std::endl;

    static_value(counter);
    std::cout << std::endl;

    static_const_value(counter);
    std::cout << std::endl;

    constexpr_value(counter);
    std::cout << std::endl;

    static_constexpr_value(counter);
    std::cout << std::endl;
}

Possible program output:

value \ address of const is               1 564
value \ address of const is               2 3D4
value \ address of const is               3 244

value \ address of static is              1 C58
value \ address of static is              1 C58
value \ address of static is              1 C58

value \ address of static const is        1 C64
value \ address of static const is        1 C64
value \ address of static const is        1 C64

value \ address of constexpr is           0 564
value \ address of constexpr is           0 3D4
value \ address of constexpr is           0 244

value \ address of static constexpr is    0 EA0
value \ address of static constexpr is    0 EA0
value \ address of static constexpr is    0 EA0

As you can see yourself constexpr is initilized multiple times (address is not the same) while static keyword ensures that initialization is performed only once.

The margins vary depending on the printer. In Windows GDI, you call the following functions to get the built-in margins, the "no-print zone":

GetDeviceCaps(hdc, PHYSICALWIDTH);
GetDeviceCaps(hdc, PHYSICALHEIGHT);
GetDeviceCaps(hdc, PHYSICALOFFSETX);
GetDeviceCaps(hdc, PHYSICALOFFSETY);

Printing right to the edge is called a "bleed" in the printing industry. The only laser printer I ever knew to print right to the edge was the Xerox 9700: 120 ppm, $500K in 1980.

If above solutions are not working, try to change your remove git url.

git remote -v

git remote set-url origin

So what will happen if two threads attack a volatile primitive variable at same time?

Usually each one can increment the value. However sometime, both will update the value at the same time and instead of incrementing by 2 total, both thread increment by 1 and only 1 is added.

Does this mean that whosoever takes lock on it, that will be setting its value first.

There is no lock. That is what synchronized is for.

And in if meantime, some other thread comes up and read old value while first thread was changing its value, then doesn't new thread will read its old value?

Yes,

What is the difference between Atomic and volatile keyword?

AtomicXxxx wraps a volatile so they are basically same, the difference is that it provides higher level operations such as CompareAndSwap which is used to implement increment.

AtomicXxxx also supports lazySet. This is like a volatile set, but doesn't stall the pipeline waiting for the write to complete. It can mean that if you read a value you just write you might see the old value, but you shouldn't be doing that anyway. The difference is that setting a volatile takes about 5 ns, bit lazySet takes about 0.5 ns.

I wanted to do this, and with my USB hardware I couldn't. I wrote a hacky way how to do it here:

http://pintant.cat/2012/05/12/power-off-usb-device/ .

In a short way: I used a USB relay to open/close the V_CC of another USB cable...

(1) UPDATE 2019: ES7 Version

class Singleton {
    static instance;

    constructor() {
        if (instance) {
            return instance;
        }

        this.instance = this;
    }

    foo() {
        // ...
    }
}

console.log(new Singleton() === new Singleton());

(2) ES6 Version

class Singleton {
    constructor() {
        const instance = this.constructor.instance;
        if (instance) {
            return instance;
        }

        this.constructor.instance = this;
    }

    foo() {
        // ...
    }
}

console.log(new Singleton() === new Singleton());

Best solution found: http://code.google.com/p/jslibs/wiki/JavascriptTips#Singleton_pattern

function MySingletonClass () {

  if (arguments.callee._singletonInstance) {
    return arguments.callee._singletonInstance;
  }

  arguments.callee._singletonInstance = this;

  this.Foo = function () {
    // ...
  };
}

var a = new MySingletonClass();
var b = MySingletonClass();
console.log( a === b ); // prints: true

For those who want the strict version:

(function (global) {
  "use strict";
  var MySingletonClass = function () {

    if (MySingletonClass.prototype._singletonInstance) {
      return MySingletonClass.prototype._singletonInstance;
    }

    MySingletonClass.prototype._singletonInstance = this;

    this.Foo = function() {
      // ...
    };
  };

var a = new MySingletonClass();
var b = MySingletonClass();
global.result = a === b;

} (window));

console.log(result);

Because, at least in HTML 4.01 and XHTML 1(.1), the type attribute for <script> elements is required.

In HTML 5, type is no longer required.

In fact, while you should use text/javascript in your HTML source, many servers will send the file with Content-type: application/javascript. Read more about these MIME types in RFC 4329.

Notice the difference between RFC 4329, that marked text/javascript as obsolete and recommending the use of application/javascript, and the reality in which some browsers freak out on <script> elements containing type="application/javascript" (in HTML source, not the HTTP Content-type header of the file that gets send). Recently, there was a discussion on the WHATWG mailing list about this discrepancy (HTML 5's type defaults to text/javascript), read these messages with subject Will you consider about RFC 4329?

Assuming by "special" you mean non-word characters, then that is pretty easy.

str = str.replace(/[_\W]+/g, "-")

In C language, objects with static storage duration have to be initialized with constant expressions, or with aggregate initializers containing constant expressions.

A "large" object is never a constant expression in C, even if the object is declared as const.

Moreover, in C language, the term "constant" refers to literal constants (like 1, 'a', 0xFF and so on), enum members, and results of such operators as sizeof. Const-qualified objects (of any type) are not constants in C language terminology. They cannot be used in initializers of objects with static storage duration, regardless of their type.

For example, this is NOT a constant

const int N = 5; /* `N` is not a constant in C */

The above N would be a constant in C++, but it is not a constant in C. So, if you try doing

static int j = N; /* ERROR */

you will get the same error: an attempt to initialize a static object with a non-constant.

This is the reason why, in C language, we predominantly use #define to declare named constants, and also resort to #define to create named aggregate initializers.

1. To start the timer use console.time("myTimer");
2. Optional: To print the elapsed time, use console.timeLog("myTimer");
3. Finally, to stop the timer and print the final time: console.timeEnd("myTimer");

You can read more about this on MDN and in the Node.js documentation.

Available on Chrome, Firefox, Opera and NodeJS. (not on Edge or Internet Explorer).

It can be used to use features which will appear in newer versions while having an older release of Python.

For example

>>> from __future__ import print_function

will allow you to use print as a function:

>>> print('# of entries', len(dictionary), file=sys.stderr)

Just one example to prove that handling time is the huge mess described, and that you can never be complacent. In several spots on this page leap-seconds have been ignored.

Several years ago, the Android operating system used GPS satellites to get a UTC time reference, but ignored the fact that GPS satellites do not use leap-seconds. No one noticed until there was confusion on New Year's Eve, when the Apple phone users and Android phone users did their count-downs about 15 seconds apart.

I think it has since been fixed, but you never know when these 'minor details' will come back to haunt you.

There is a library at https://sourceforge.net/projects/stochunit/ for handling selection of ranges.

StochIntegerSelector randomIntegerSelector = new StochIntegerSelector();
randomIntegerSelector.setMin(-1);
randomIntegerSelector.setMax(1);
Integer selectInteger = randomIntegerSelector.selectInteger();

It has edge inclusion/preclusion.

Please note that the solutions based on sys.exit() or any Exception may not work in a multi-threaded environment.

Since exit() ultimately “only” raises an exception, it will only exit the process when called from the main thread, and the exception is not intercepted. (doc)

This answer from Alex Martelli for more details.

Instead of removeClass and addClass, you can also do it like this:

$('.IsBestAnswer').toggleClass('IsBestAnswer bestanswer');

In your MakeFile or CMakeLists.txt you can set CMAKE_CXX_FLAGS as below:

set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -I/path/to/your/folder")

    public static function normalizeUrl(string $url) {
        $parts = parse_url($url);
        return $parts['scheme'] .
            '://' .
            $parts['host'] .
            implode('/', array_map('rawurlencode', explode('/', $parts['path'])));

    }

If its a SOAP 1.1 service then you will also need to include a SOAPAction HTTP header field:

http://www.w3.org/TR/2000/NOTE-SOAP-20000508/#_Toc478383528

input:-webkit-autofill {
  border: none;
  border-radius: .3rem;
  caret-color: #fff; /* Pour le I quand on édite */
  color: #fff;
  background: #292a2d;
  /* webkit autofill */
  -webkit-text-fill-color: #fff; /* Surcharge la font color d'autofill */
  -webkit-background-clip: text; /* Supprime le background autofill, utile pour le border radius */
  box-shadow: 0 0 0 50px #292a2d inset; /* Ajoute un fake background à base d'ombrage aplatit */
}

In case you are using bundler, you need to add something like this to your Gemfile:

gem 'redcarpet', :git => 'git://github.com/tanoku/redcarpet.git'

And in case there is .gemspec file, it should be able to fetch and install the gem when running bundle install.

UPD. As indicated in comments, for Bundler to function properly you also need to add the following to config.ru:

require "bundler" 
Bundler.setup(:default)

In order to convert string to char

 String str = "abcd";
char arr [] = new char[len]; // len is the length of the array
arr = str.toCharArray();

If you need a fully qualified domain name and have no HTTP request, on Linux, you could use:

var child_process = require("child_process");

child_process.exec("hostname -f", function(err, stdout, stderr) {
  var hostname = stdout.trim();
});

No siblings solution:

var x = $('#xxx').parent().html();
alert(x);

Universal solution:

// no cloning necessary    
var x = $('#xxx').wrapAll('<div>').parent().html(); 
alert(x);

Fiddle here: http://jsfiddle.net/ezmilhouse/Mv76a/

I'm not aware of any way to programmatically create these URLs, but the existing username space (www.facebook.com/something) works on fb.me also (e.g. http://fb.me/facebook )

An alternate option for a single file is to "replace" the current version of the file with the older revision:

svn rm file.ext
svn cp svn://host/path/to/file/on/repo/file.ext@<REV> file.ext
svn ci

This has the added feature that the unwanted changes do not show up in the log for this file (i.e. svn log file.ext).

private void button26_Click(object sender, EventArgs e)
{
    System.Diagnostics.ProcessStartInfo proc = new System.Diagnostics.ProcessStartInfo();
    proc.FileName = @"C:\windows\system32\cmd.exe";
    proc.Arguments = "/c ping -t " + tx1.Text + " ";
    System.Diagnostics.Process.Start(proc);
    tx1.Focus();
}

private void button27_Click(object sender, EventArgs e)
{
    System.Diagnostics.ProcessStartInfo proc = new System.Diagnostics.ProcessStartInfo();
    proc.FileName = @"C:\windows\system32\cmd.exe";
    proc.Arguments = "/c ping  " + tx2.Text + " ";
    System.Diagnostics.Process.Start(proc);
    tx2.Focus();
}

Try importing this in build.gradle dependencies

compile group: 'com.googlecode.json-simple', name: 'json-simple', version: '1.1'

autoscroll will be defined and modified in the controller:

<span ng-class= "autoscroll?'class_if_true':'class_if_false'"></span>

Add multiple classes based on condition by:

<span ng-class= "autoscroll?'first second third':'classes_if_false'"></span>

Look at the filter function.

If you just need a 1-pole low-pass filter, it's

xfilt = filter(a, [1 a-1], x);

where a = T/τ, T = the time between samples, and τ (tau) is the filter time constant.

Here's the corresponding high-pass filter:

xfilt = filter([1-a a-1],[1 a-1], x);

If you need to design a filter, and have a license for the Signal Processing Toolbox, there's a bunch of functions, look at fvtool and fdatool.

Just to make this absolutely clear for all:

A .MDF file is “typically” a SQL Server data file however it is important to note that it does NOT have to be.

This is because .MDF is nothing more than a recommended/preferred notation but the extension itself does not actually dictate the file type.

To illustrate this, if someone wanted to create their primary data file with an extension of .gbn they could go ahead and do so without issue.

To qualify the preferred naming conventions:

• .mdf - Primary database data file.
• .ndf - Other database data files i.e. non Primary.
• .ldf - Log data file.

I shun redundant delegate declarations.

private void mCoolObject_CoolEvent(object sender, CoolObjectEventArgs args)
{
    if (InvokeRequired)
    {
        Invoke(new Action<object, CoolObjectEventArgs>(mCoolObject_CoolEvent), sender, args);
        return;
    }
    // do the dirty work of my method here
}

For non-events, you can use the System.Windows.Forms.MethodInvoker delegate or System.Action.

EDIT: Additionally, every event has a corresponding EventHandler delegate so there's no need at all to redeclare one.

@Joe Philllips

SQlDataReader.IsDBNull(int index) requires the ordinal number of the column. Is there a way to check for nulls using Column Name, and not it's Ordinal Number?

1. primitive type variable like string,number are always pass as pass by value.

2. Array and Object is passed as pass by reference or pass by value based on these two condition.

   • if you are changing value of that Object or array with new Object or Array then it is pass by Value.

     object1 = {item: "car"}; array1=[1,2,3];

   here you are assigning new object or array to old one.you are not changing the value of property of old object.so it is pass by value.

   • if you are changing a property value of an object or array then it is pass by Reference.

     object1.key1= "car"; array1[0]=9;

   here you are changing a property value of old object.you are not assigning new object or array to old one.so it is pass by reference.

Code

    function passVar(object1, object2, number1) {

        object1.key1= "laptop";
        object2 = {
            key2: "computer"
        };
        number1 = number1 + 1;
    }

    var object1 = {
        key1: "car"
    };
    var object2 = {
        key2: "bike"
    };
    var number1 = 10;

    passVar(object1, object2, number1);
    console.log(object1.key1);
    console.log(object2.key2);
    console.log(number1);

Output: -
    laptop
    bike
    10

Try using Replace to see if it will work for you. The problem as I see it which has been mentioned a few times above is the CDate function is choking on the periods. You can use replace to change them to slashes. To answer your question about a Function in vba that can parse any date format, there is not any you have very limited options.

Dim current as Date, highest as Date, result() as Date 
For Each itemDate in DeliveryDateArray
    Dim tempDate As String
    itemDate = IIf(Trim(itemDate) = "", "0", itemDate) 'Added per OP's request.
    tempDate = Replace(itemDate, ".", "/")
    current = Format(CDate(tempDate),"dd/mm/yyyy")
    if current > highest then 
        highest = current 
    end if 
    ' some more operations an put dates into result array 
Next itemDate 
'After activating final sheet... 
Range("A1").Resize(UBound(result), 1).Value = Application.Transpose(result) 

.val() always works with textarea elements.

.text() works sometimes and fails other times! It's not reliable (tested in Chrome 33)

What's best is that .val() works seamlessly with other form elements too (like input) whereas .text() fails.

Another quick test for a string to have something in it but space.

if [[ -n "${str// /}" ]]; then
    echo "It is not empty!"
fi

"-n" means non-zero length string.

Then the first two slashes mean match all of the following, in our case space(s). Then the third slash is followed with the replacement (empty) string and closed with "}". Note the difference from the usual regular expression syntax.

You can read more about string manipulation in bash shell scripting here.

Surely typing /usr/sbin/apache2 -v into the shell is the best and quickest way to go, by the way here's another option, just in case there's PHP too in your server and you're interested into gathering Apache version (and much more infos) in quick programmatical steps.

Just make an info.php file in your Apache web root folder (or whatever you like) and write these inside it:

<?php
    phpinfo();
?>

Now go to yoursite.com/info.php (or localhost/info.php for local machines).

You'll see your Apache version in PHP Variables section, here's an example:

phpinfo() example dump page

Also, please notice that these steps obviously apply to any web server with PHP integration, so it's not limited to Apache and once created that page could be handy while developing (just don't forget to remove it on production environments!!)

See "Is there a way to define variables of two types in for loop?" for another way involving nesting multiple for loops. The advantage of the other way over Georg's "struct trick" is that it (1) allows you to have a mixture of static and non-static local variables and (2) it allows you to have non-copyable variables. The downside is that it is far less readable and may be less efficient.

I suggest doing it in two steps:

# set fixed value to 'c2' where the condition is met
df.loc[df['c1'] == 'Value', 'c2'] = 10

# copy value from 'c3' to 'c2' where the condition is NOT met
df.loc[df['c1'] != 'Value', 'c2'] = df[df['c1'] != 'Value', 'c3']

You can adapt the solution you linked in How to sort ArrayList<Long> in Java in decreasing order? by wrapping it in a lambda:

.sorted((f1, f2) -> Long.compare(f2.lastModified(), f1.lastModified())

note that f2 is the first argument of Long.compare, not the second, so the result will be reversed.

You can use date filter to convert in date and display in specific format.

In .ts file (typescript):

let dateString = '1968-11-16T00:00:00' 
let newDate = new Date(dateString);

In HTML:

{{dateString |  date:'MM/dd/yyyy'}}

Below are some formats which you can implement :

Backend:

public todayDate = new Date();

HTML :

<select>
<option value=""></option>
<option value="MM/dd/yyyy">[{{todayDate | date:'MM/dd/yyyy'}}]</option>
<option value="EEEE, MMMM d, yyyy">[{{todayDate | date:'EEEE, MMMM d, yyyy'}}]</option>
<option value="EEEE, MMMM d, yyyy h:mm a">[{{todayDate | date:'EEEE, MMMM d, yyyy h:mm a'}}]</option>
<option value="EEEE, MMMM d, yyyy h:mm:ss a">[{{todayDate | date:'EEEE, MMMM d, yyyy h:mm:ss a'}}]</option>
<option value="MM/dd/yyyy h:mm a">[{{todayDate | date:'MM/dd/yyyy h:mm a'}}]</option>
<option value="MM/dd/yyyy h:mm:ss a">[{{todayDate | date:'MM/dd/yyyy h:mm:ss a'}}]</option>
<option value="MMMM d">[{{todayDate | date:'MMMM d'}}]</option>   
<option value="yyyy-MM-ddTHH:mm:ss">[{{todayDate | date:'yyyy-MM-ddTHH:mm:ss'}}]</option>
<option value="h:mm a">[{{todayDate | date:'h:mm a'}}]</option>
<option value="h:mm:ss a">[{{todayDate | date:'h:mm:ss a'}}]</option>      
<option value="EEEE, MMMM d, yyyy hh:mm:ss a">[{{todayDate | date:'EEEE, MMMM d, yyyy hh:mm:ss a'}}]</option>
<option value="MMMM yyyy">[{{todayDate | date:'MMMM yyyy'}}]</option> 
</select>

I like the simple solution using windows functions:

select t.*
from (select student.*, su.subname, max(mark) over (partition by subid) as maxmark
      from marks m join
           students st
           on m.stid = st.stid join
           subject su
           on m.subid = su.subid
     ) t
where t.mark = maxmark

Or, alternatively:

select t.*
from (select student.*, su.subname, rank(mark) over (partition by subid order by mark desc) as markseqnum
      from marks m join
           students st
           on m.stid = st.stid join
           subject su
           on m.subid = su.subid
     ) t
where markseqnum = 1

In Android, a Toast is a short message that displays on the screen for a short amount of time and then disappears automatically without disrupting user interaction with the app.

So a lot of people coming from an Android background want to know what the iOS version of a Toast is. Besides the current question, other similar questions can be found here, here, and here. The answer is that there is no exact equivalent to a Toast in iOS. Various workarounds that have been presented, though, including

• making your own Toast with a UIView (see here, here, here, and here)
• importing a third party project that mimics a Toast (see here, here, here, and here)
• using a buttonless Alert with a timer (see here)

However, my advice is to stick with the standard UI options that already come with iOS. Don't try to make your app look and behave exactly the same as the Android version. Think about how to repackage it so that it looks and feels like an iOS app. See the following link for some choices.

• Overview of the standard iOS options for temporarily displaying information to a user.

Consider redesigning the UI in a way that conveys the same information. Or, if the information is very important, then an Alert might be the answer.

You can and should have the users's password encrypted:

ALTER USER username WITH ENCRYPTED PASSWORD 'password';

As of 2018 and beyond, you have a more modern option which is to incorporate async/await in your ReactJS application. A promise-based HTTP client library such as axios can be used. The sample code is given below:

import axios from 'axios';
...
class Login extends Component {
    constructor(props, context) {
        super(props, context);
        this.onLogin = this.onLogin.bind(this);
        ...
    }
    async onLogin() {
        const { email, password } = this.state;
        try {
           const response = await axios.post('/login', { email, password });
           console.log(response);
        } catch (err) {
           ...
        }
    }
    ...
}

Checkout this wiki, specifically the section Restrictions on valid host names

Hostnames are composed of series of labels concatenated with dots, as are all domain names. For example, "en.wikipedia.org" is a hostname. Each label must be between 1 and 63 characters long, and the entire hostname (including the delimiting dots but not a trailing dot) has a maximum of 253 ASCII characters.

The Internet standards (Requests for Comments) for protocols mandate that component hostname labels may contain only the ASCII letters 'a' through 'z' (in a case-insensitive manner), the digits '0' through '9', and the hyphen ('-'). The original specification of hostnames in RFC 952, mandated that labels could not start with a digit or with a hyphen, and must not end with a hyphen. However, a subsequent specification (RFC 1123) permitted hostname labels to start with digits. No other symbols, punctuation characters, or white space are permitted.

That's the RHEL release version.

You can see the kernel version by typing uname -r. It'll be 2.6.something.

For Swift 4.2, that code still works fine

 var mnemonic: [String] =  ["abandon",   "amount",   "liar", "buyer"]
    var myJsonString = ""
    do {
        let data =  try JSONSerialization.data(withJSONObject:mnemonic, options: .prettyPrinted)
       myJsonString = NSString(data: data, encoding: String.Encoding.utf8.rawValue) as! String
    } catch {
        print(error.localizedDescription)
    }
    return myJsonString

Since you're comparing numbers, you can use an arithmetic expression, which allows for simpler handling of parameters and comparison:

wget -q --tries=10 --timeout=20 --spider http://google.com
if (( $? != 0 )); then
    echo "Sorry you are Offline"
    exit 1
fi

Notice how instead of -ne, you can just use !=. In an arithmetic context, we don't even have to prepend $ to parameters, i.e.,

var_a=1
var_b=2
(( var_a < var_b )) && echo "a is smaller"

works perfectly fine. This doesn't appply to the $? special parameter, though.

Further, since (( ... )) evaluates non-zero values to true, i.e., has a return status of 0 for non-zero values and a return status of 1 otherwise, we could shorten to

if (( $? )); then

but this might confuse more people than the keystrokes saved are worth.

The (( ... )) construct is available in Bash, but not required by the POSIX shell specification (mentioned as possible extension, though).

This all being said, it's better to avoid $? altogether in my opinion, as in Cole's answer and Steven's answer.

Well, x.parentNode returns the HEAD element, so you are inserting the script just before the head tag. Maybe that's the problem.

Try x.parentNode.appendChild() instead.

You have to understand that Python represents all its data as objects. Some of these objects like lists and dictionaries are mutable, meaning you can change their content without changing their identity. Other objects like integers, floats, strings and tuples are objects that can not be changed. An easy way to understand that is if you have a look at an objects ID.

Below you see a string that is immutable. You can not change its content. It will raise a TypeError if you try to change it. Also, if we assign new content, a new object is created instead of the contents being modified.

>>> s = "abc"
>>>id(s)
4702124
>>> s[0] 
'a'
>>> s[0] = "o"
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
TypeError: 'str' object does not support item assignment
>>> s = "xyz"
>>>id(s)
4800100
>>> s += "uvw"
>>>id(s)
4800500

You can do that with a list and it will not change the objects identity

>>> i = [1,2,3]
>>>id(i)
2146718700
>>> i[0] 
1
>>> i[0] = 7
>>> id(i)
2146718700

To read more about Python's data model you could have a look at the Python language reference:

• Python 2 datamodel
• Python 3 datamodel

You don't say what shell you are using, but they generally don't support regular expressions that way, although there are common *nix CLI tools (grep, sed, etc) that do.

What shells like bash do support is globbing, which uses some similiar characters (eg, *) but is not the same thing.

Newer versions of bash do have a regular expression operator, =~:

for x in `ls`; do 
    if [[ $x =~ .+\..* ]]; then 
        echo $x; 
    fi; 
done

Try trimming the string to make sure there is no extra white space:

Cursor c = db.rawQuery("SELECT * FROM tbl1 WHERE TRIM(name) = '"+name.trim()+"'", null);

Also use c.moveToFirst() like @thinksteep mentioned.

This is a complete code for select statements.

SQLiteDatabase db = this.getReadableDatabase();
Cursor c = db.rawQuery("SELECT column1,column2,column3 FROM table ", null);
if (c.moveToFirst()){
    do {
        // Passing values 
        String column1 = c.getString(0);
        String column2 = c.getString(1);
        String column3 = c.getString(2); 
        // Do something Here with values
    } while(c.moveToNext());
}
c.close();
db.close();

Different order make it works :)

<mvc:resources mapping="/resources/**" location="/resources/" />
<mvc:annotation-driven />

I found a simple difference that hasn't been addressed in this thread.

If you're doing all the ScrollToCarat() calls as part of your form's Load() event, it doesn't work. I just added my ScrollToCarat() call to my form's Activated() event, and it works fine.

Edit

It's important to only do this scrolling the first time form's Activated event is fired (not on subsequent activations), or it will scroll every time your form is activated, which is something you probably don't want.

So if you're only trapping the Activated() event to scroll your text when your program loads, then you can just unsubscribe to the event inside the event handler itself, thusly:

Activated -= new System.EventHandler(this.Form1_Activated);

If you have other things you need to do each time your form is activated, you can set a bool to true the first time your Activated() event is fired, so you don't scroll on subsequent activations, but can still do the other things you need to do.

Also, if your TextBox is on a tab that isn't the SelectedTab, ScrollToCarat() will have no effect. So you need at least make it the selected tab while you're scrolling. You can wrap the code in a YourTab.SuspendLayout(); and YourTab.ResumeLayout(false); pair if your form flickers when you do this.

End of edit

Hope this helps!

DataTable dt = new DataTable();
foreach (DataRow dr in dt.Rows)
{
    if (dr["Column_Name"] == DBNull.Value)
    {
        //Do something
    }
    else
    {
        //Do something
    }
}

At last this post helps me on iOS: http://www.excellentwebworld.com/phonegap-open-a-link-in-safari-or-external-browser/.

Open "CDVwebviewDelegate.m" file and search "shouldStartLoadWithRequest", then add this code to the beginning of the function:

if([[NSString stringWithFormat:@"%@",request.URL] rangeOfString:@"file"].location== NSNotFound) {
    [[UIApplication sharedApplication] openURL:[request URL]];
    return NO;
}

While using navigator.app.loadUrl("http://google.com", {openExternal : true}); for Android is OK.

Via Cordova 3.3.0.

You can also use like below code.

<button style="position: absolute; right: 0;">Button</button>

If your Service is started by your app then actually your service is running on main process. so when app is killed service will also be stopped. So what you can do is, send broadcast from onTaskRemoved method of your service as follows:

 Intent intent = new Intent("com.android.ServiceStopped");
 sendBroadcast(intent);

and have an broadcast receiver which will again start a service. I have tried it. service restarts from all type of kills.

Don't know about android but in POJ I use

public final class MyJSONObject extends JSONObject {
    public MyJSONObject(URL url) throws IOException {
        super(getServerData(url));
    }
    static String getServerData(URL url) throws IOException {
        HttpURLConnection con = (HttpURLConnection) url.openConnection();
        BufferedReader ir = new BufferedReader(new InputStreamReader(con.getInputStream()));
        String text = ir.lines().collect(Collectors.joining("\n"));
        return (text);
    }
}

EDIT - related to 2.3.0 (2016-12-07)

NOTE: to get solution for previous version, check the history of this post

Similar topic is discussed here Equivalent of $compile in Angular 2. We need to use JitCompiler and NgModule. Read more about NgModule in Angular2 here:

• Angular 2 RC5 - NgModules, Lazy Loading and AoT compilation

In a Nutshell

There is a working plunker/example (dynamic template, dynamic component type, dynamic module,JitCompiler, ... in action)

The principal is:
1) create Template
2) find ComponentFactory in cache - go to 7)
3) - create Component
4) - create Module
5) - compile Module
6) - return (and cache for later use) ComponentFactory
7) use Target and ComponentFactory to create an Instance of dynamic Component

Here is a code snippet (more of it here) - Our custom Builder is returning just built/cached ComponentFactory and the view Target placeholder consume to create an instance of the DynamicComponent

  // here we get a TEMPLATE with dynamic content === TODO
  var template = this.templateBuilder.prepareTemplate(this.entity, useTextarea);

  // here we get Factory (just compiled or from cache)
  this.typeBuilder
      .createComponentFactory(template)
      .then((factory: ComponentFactory<IHaveDynamicData>) =>
    {
        // Target will instantiate and inject component (we'll keep reference to it)
        this.componentRef = this
            .dynamicComponentTarget
            .createComponent(factory);

        // let's inject @Inputs to component instance
        let component = this.componentRef.instance;

        component.entity = this.entity;
        //...
    });

This is it - in nutshell it. To get more details.. read below

.

TL&DR

Observe a plunker and come back to read details in case some snippet requires more explanation

.

Detailed explanation - Angular2 RC6++ & runtime components

Below description of this scenario, we will

1. create a module PartsModule:NgModule (holder of small pieces)
2. create another module DynamicModule:NgModule, which will contain our dynamic component (and reference PartsModule dynamically)
3. create dynamic Template (simple approach)
4. create new Component type (only if template has changed)
5. create new RuntimeModule:NgModule. This module will contain the previously created Component type
6. call JitCompiler.compileModuleAndAllComponentsAsync(runtimeModule) to get ComponentFactory
7. create an Instance of the DynamicComponent - job of the View Target placeholder and ComponentFactory
8. assign @Inputs to new instance (switch from INPUT to TEXTAREA editing), consume @Outputs

NgModule

We need an NgModules.

While I would like to show a very simple example, in this case, I would need three modules (in fact 4 - but I do not count the AppModule). Please, take this rather than a simple snippet as a basis for a really solid dynamic component generator.

There will be one module for all small components, e.g. string-editor, text-editor (date-editor, number-editor...)

@NgModule({
  imports:      [ 
      CommonModule,
      FormsModule
  ],
  declarations: [
      DYNAMIC_DIRECTIVES
  ],
  exports: [
      DYNAMIC_DIRECTIVES,
      CommonModule,
      FormsModule
  ]
})
export class PartsModule { }

Where DYNAMIC_DIRECTIVES are extensible and are intended to hold all small parts used for our dynamic Component template/type. Check app/parts/parts.module.ts

The second will be module for our Dynamic stuff handling. It will contain hosting components and some providers.. which will be singletons. Therefor we will publish them standard way - with forRoot()

import { DynamicDetail }          from './detail.view';
import { DynamicTypeBuilder }     from './type.builder';
import { DynamicTemplateBuilder } from './template.builder';

@NgModule({
  imports:      [ PartsModule ],
  declarations: [ DynamicDetail ],
  exports:      [ DynamicDetail],
})

export class DynamicModule {

    static forRoot()
    {
        return {
            ngModule: DynamicModule,
            providers: [ // singletons accross the whole app
              DynamicTemplateBuilder,
              DynamicTypeBuilder
            ], 
        };
    }
}

Check the usage of the forRoot() in the AppModule

Finally, we will need an adhoc, runtime module.. but that will be created later, as a part of DynamicTypeBuilder job.

The forth module, application module, is the one who keeps declares compiler providers:

...
import { COMPILER_PROVIDERS } from '@angular/compiler';    
import { AppComponent }   from './app.component';
import { DynamicModule }    from './dynamic/dynamic.module';

@NgModule({
  imports:      [ 
    BrowserModule,
    DynamicModule.forRoot() // singletons
  ],
  declarations: [ AppComponent],
  providers: [
    COMPILER_PROVIDERS // this is an app singleton declaration
  ],

Read (do read) much more about NgModule there:

• Angular 2 RC5 - NgModules, Lazy Loading and AoT compilation
• Angular Modules documentation

A template builder

In our example we will process detail of this kind of entity

entity = { 
    code: "ABC123",
    description: "A description of this Entity" 
};

To create a template, in this plunker we use this simple/naive builder.

The real solution, a real template builder, is the place where your application can do a lot

// plunker - app/dynamic/template.builder.ts
import {Injectable} from "@angular/core";

@Injectable()
export class DynamicTemplateBuilder {

    public prepareTemplate(entity: any, useTextarea: boolean){
      
      let properties = Object.keys(entity);
      let template = "<form >";
      let editorName = useTextarea 
        ? "text-editor"
        : "string-editor";
        
      properties.forEach((propertyName) =>{
        template += `
          <${editorName}
              [propertyName]="'${propertyName}'"
              [entity]="entity"
          ></${editorName}>`;
      });
  
      return template + "</form>";
    }
}

A trick here is - it builds a template which uses some set of known properties, e.g. entity. Such property(-ies) must be part of dynamic component, which we will create next.

To make it a bit more easier, we can use an interface to define properties, which our Template builder can use. This will be implemented by our dynamic Component type.

export interface IHaveDynamicData { 
    public entity: any;
    ...
}

A ComponentFactory builder

Very important thing here is to keep in mind:

our component type, build with our DynamicTypeBuilder, could differ - but only by its template (created above). Components' properties (inputs, outputs or some protected) are still same. If we need different properties, we should define different combination of Template and Type Builder

So, we are touching the core of our solution. The Builder, will 1) create ComponentType 2) create its NgModule 3) compile ComponentFactory 4) cache it for later reuse.

An dependency we need to receive:

// plunker - app/dynamic/type.builder.ts
import { JitCompiler } from '@angular/compiler';
    
@Injectable()
export class DynamicTypeBuilder {

  // wee need Dynamic component builder
  constructor(
    protected compiler: JitCompiler
  ) {}

And here is a snippet how to get a ComponentFactory:

// plunker - app/dynamic/type.builder.ts
// this object is singleton - so we can use this as a cache
private _cacheOfFactories:
     {[templateKey: string]: ComponentFactory<IHaveDynamicData>} = {};
  
public createComponentFactory(template: string)
    : Promise<ComponentFactory<IHaveDynamicData>> {    
    let factory = this._cacheOfFactories[template];

    if (factory) {
        console.log("Module and Type are returned from cache")
       
        return new Promise((resolve) => {
            resolve(factory);
        });
    }
    
    // unknown template ... let's create a Type for it
    let type   = this.createNewComponent(template);
    let module = this.createComponentModule(type);
    
    return new Promise((resolve) => {
        this.compiler
            .compileModuleAndAllComponentsAsync(module)
            .then((moduleWithFactories) =>
            {
                factory = _.find(moduleWithFactories.componentFactories
                                , { componentType: type });

                this._cacheOfFactories[template] = factory;

                resolve(factory);
            });
    });
}

Above we create and cache both Component and Module. Because if the template (in fact the real dynamic part of that all) is the same.. we can reuse

And here are two methods, which represent the really cool way how to create a decorated classes/types in runtime. Not only @Component but also the @NgModule

protected createNewComponent (tmpl:string) {
  @Component({
      selector: 'dynamic-component',
      template: tmpl,
  })
  class CustomDynamicComponent  implements IHaveDynamicData {
      @Input()  public entity: any;
  };
  // a component for this particular template
  return CustomDynamicComponent;
}
protected createComponentModule (componentType: any) {
  @NgModule({
    imports: [
      PartsModule, // there are 'text-editor', 'string-editor'...
    ],
    declarations: [
      componentType
    ],
  })
  class RuntimeComponentModule
  {
  }
  // a module for just this Type
  return RuntimeComponentModule;
}

Important:

our component dynamic types differ, but just by template. So we use that fact to cache them. This is really very important. Angular2 will also cache these.. by the type. And if we would recreate for the same template strings new types... we will start to generate memory leaks.

ComponentFactory used by hosting component

Final piece is a component, which hosts the target for our dynamic component, e.g. <div #dynamicContentPlaceHolder></div>. We get a reference to it and use ComponentFactory to create a component. That is in a nutshell, and here are all the pieces of that component (if needed, open plunker here)

Let's firstly summarize import statements:

import {Component, ComponentRef,ViewChild,ViewContainerRef}   from '@angular/core';
import {AfterViewInit,OnInit,OnDestroy,OnChanges,SimpleChange} from '@angular/core';

import { IHaveDynamicData, DynamicTypeBuilder } from './type.builder';
import { DynamicTemplateBuilder }               from './template.builder';

@Component({
  selector: 'dynamic-detail',
  template: `
<div>
  check/uncheck to use INPUT vs TEXTAREA:
  <input type="checkbox" #val (click)="refreshContent(val.checked)" /><hr />
  <div #dynamicContentPlaceHolder></div>  <hr />
  entity: <pre>{{entity | json}}</pre>
</div>
`,
})
export class DynamicDetail implements AfterViewInit, OnChanges, OnDestroy, OnInit
{ 
    // wee need Dynamic component builder
    constructor(
        protected typeBuilder: DynamicTypeBuilder,
        protected templateBuilder: DynamicTemplateBuilder
    ) {}
    ...

We just receive, template and component builders. Next are properties which are needed for our example (more in comments)

// reference for a <div> with #dynamicContentPlaceHolder
@ViewChild('dynamicContentPlaceHolder', {read: ViewContainerRef}) 
protected dynamicComponentTarget: ViewContainerRef;
// this will be reference to dynamic content - to be able to destroy it
protected componentRef: ComponentRef<IHaveDynamicData>;

// until ngAfterViewInit, we cannot start (firstly) to process dynamic stuff
protected wasViewInitialized = false;

// example entity ... to be recieved from other app parts
// this is kind of candiate for @Input
protected entity = { 
    code: "ABC123",
    description: "A description of this Entity" 
  };

In this simple scenario, our hosting component does not have any @Input. So it does not have to react to changes. But despite of that fact (and to be ready for coming changes) - we need to introduce some flag if the component was already (firstly) initiated. And only then we can start the magic.

Finally we will use our component builder, and its just compiled/cached ComponentFacotry. Our Target placeholder will be asked to instantiate the Component with that factory.

protected refreshContent(useTextarea: boolean = false){
  
  if (this.componentRef) {
      this.componentRef.destroy();
  }
  
  // here we get a TEMPLATE with dynamic content === TODO
  var template = this.templateBuilder.prepareTemplate(this.entity, useTextarea);

  // here we get Factory (just compiled or from cache)
  this.typeBuilder
      .createComponentFactory(template)
      .then((factory: ComponentFactory<IHaveDynamicData>) =>
    {
        // Target will instantiate and inject component (we'll keep reference to it)
        this.componentRef = this
            .dynamicComponentTarget
            .createComponent(factory);

        // let's inject @Inputs to component instance
        let component = this.componentRef.instance;

        component.entity = this.entity;
        //...
    });
}

small extension

Also, we need to keep a reference to compiled template.. to be able properly destroy() it, whenever we will change it.

// this is the best moment where to start to process dynamic stuff
public ngAfterViewInit(): void
{
    this.wasViewInitialized = true;
    this.refreshContent();
}
// wasViewInitialized is an IMPORTANT switch 
// when this component would have its own changing @Input()
// - then we have to wait till view is intialized - first OnChange is too soon
public ngOnChanges(changes: {[key: string]: SimpleChange}): void
{
    if (this.wasViewInitialized) {
        return;
    }
    this.refreshContent();
}

public ngOnDestroy(){
  if (this.componentRef) {
      this.componentRef.destroy();
      this.componentRef = null;
  }
}

done

That is pretty much it. Do not forget to Destroy anything what was built dynamically (ngOnDestroy). Also, be sure to cache dynamic types and modules if the only difference is their template.

Check it all in action here

to see previous versions (e.g. RC5 related) of this post, check the history

Schema::table is to modify an existing table, use Schema::create to create new.

if you use next tool: https://github.com/nomad/shenzhen

then this task is very easy:

which ipa 1>/dev/null 2>&1 || echo 'no shenzhen. to install use: sudo gem install shenzhen --no-ri --no-rdoc'
ipa build --verbose --scheme "${schemeName}"

source

Here is a manual way to invalidate the cache for all files on CloudFront via AWS

Seems a banal solution but I usually put simply a TextView in the front of the spinner. The whole Xml looks like this. (hey guys, don't shoot me, I know that some of you don't like this kind of marriage):

<FrameLayout
    android:id="@+id/selectTypesLinear"
    android:layout_width="match_parent"
    android:layout_height="match_parent"
    android:orientation="horizontal" >

    <Spinner
        android:id="@+id/spinnerExercises"
        android:layout_width="match_parent"
        android:layout_height="match_parent"
        android:entries="@array/exercise_spinner_entries"
        android:prompt="@string/exercise_spinner_prompt"
     />                         
    <TextView
        android:id="@+id/spinnerSelectText"
        android:layout_width="match_parent"
        android:layout_height="match_parent"
        android:text="Hey! Select this guy!"
        android:gravity="center"
        android:background="#FF000000" />


</FrameLayout>

Then I hide the TextView when an Item was selected. Obviously the background color of the TextView should be the same as the Spinner. Works on Android 4.0. Don't know on older versions.

Yes. Because the Spinner calls setOnItemSelectedListener at the beginning, the hiding of the textview could be a little bit tricky, but can be done this way:

    Boolean controlTouched;

    exerciseSpinner.setOnTouchListener(new OnTouchListener() {


        @Override
        public boolean onTouch(View v, MotionEvent event) {
            controlTouched = true; // I touched it but but not yet selected an Item.
            return false;
        }

    });
    exerciseSpinner.setOnItemSelectedListener(new OnItemSelectedListener() {

        @Override
        public void onItemSelected(AdapterView<?> arg0, View arg1,
                int arg2, long arg3) {
            if (controlTouched) { // Are you sure that I touched it with my fingers and not someone else  ?
                spinnerSelText.setVisibility(View.GONE);
            }
        }

        @Override
        public void onNothingSelected(AdapterView<?> arg0) {
        }

    });

Use arrows or hjkl to get to one of the bracketing expressions, then v to select visual (i.e. selecting) mode, then % to jump to the other bracket.

That way you haven't installed pip, you installed just the easy_install i.e. setuptools.

First you should remove all the packages you installed with easy_install using (see uninstall):

easy_install -m PackageName

This includes pip if you installed it using easy_install pip.

After this you remove the setuptools following the instructions from here:

If setuptools package is found in your global site-packages directory, you may safely remove the following file/directory:

setuptools-*.egg

If setuptools is installed in some other location such as the user site directory (eg: ~/.local, ~/Library/Python or %APPDATA%), then you may safely remove the following files:

pkg_resources.py
easy_install.py
setuptools/
setuptools-*.egg-info/

You can pass your arguments using this encodeURIComponent function so you don't have to worry about passing any special characters.

data: "param1=getAccNos&param2="+encodeURIComponent('Dolce & Gabbana') 

OR

var someValue = 'Dolce & Gabbana';
data: "param1=getAccNos&param2="+encodeURIComponent(someValue)

https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/encodeURIComponent

I see two ways:

First you make a control socket like this:

 ssh -oControlMaster=yes -oControlPath=~/.ssh/ssh-%r-%h-%p <yourip>

and run your commands

 ssh -oControlMaster=no -oControlPath=~/.ssh/ssh-%r-%h-%p <yourip> -t <yourcommand>

This way you can write an ssh command without actually reconnecting to the server.

The second would be to dynamically generate the script, scping it and running.

I know this post is old, but i ran in the same problem, and i solved it by simply changing my configuration from Java 11 down to Java 8.

I checked and it worked for me.

<div class="collapse navbar-collapse" id="bs-example-navbar-collapse-1" style="margin-top:100px;"><!--style with margin-top according to your need-->
        <ul class="nav navbar-nav navbar-right">
            <li><a href="#">About</a></li>
            <li><a href="#">Services</a></li>
            <li><a href="#">Contact</a></li>
        </ul>
    </div>

Note: the following is nowadays largely obsolete thanks to strict mode, and hasOwnProperty. The correct solution is to use strict mode and to check for the presence of a property using obj.hasOwnProperty. This answer predates both these things, at least as widely implemented (yes, it is that old). Take the following as a historical note.

Bear in mind that undefined is (unfortunately) not a reserved word in JavaScript if you’re not using strict mode. Therefore, someone (someone else, obviously) could have the grand idea of redefining it, breaking your code.

A more robust method is therefore the following:

if (typeof(x.attribute) !== 'undefined')

On the flip side, this method is much more verbose and also slower. :-/

A common alternative is to ensure that undefined is actually undefined, e.g. by putting the code into a function which accepts an additional parameter, called undefined, that isn’t passed a value. To ensure that it’s not passed a value, you could just call it yourself immediately, e.g.:

(function (undefined) {
    … your code …
    if (x.attribute !== undefined)
        … mode code …
})();

You could use cjson, that claims to be up to 250 times faster than pure-python implementations, given that you have "some long complicated JSON file" and you will probably need to run it several times (decoders fail and report the first error they encounter only).

For what you are trying to do, instead of PreparedStatement you can use Statement. Your code may be modified as-

String sql = "SELECT column_name from information_schema.columns where table_name='suppliers';";

Statement s  = connection.createStatement();
ResultSet rs = s.executeQuery(sql);

Hope this helps.

For the background color - the fill property can be accessed like so:

svgElement.style.fill = '#fff';

To set the border color, do the same for the stroke property.

Please refer to the W3C reference on SVG, as it's a broad issue.

I would strongly suggest you start using jQuery. Your code would look like:

$(function() {
    $('form[name="myform"]').submit(function(e) {
        var username = $('form[name="myform"] input[name="username"]').val();
        if ( username == '') {
            e.preventDefault();
            $('#errors').text('*Please enter a username*');
        }
    });
});

We can mute it in this way (device and simulator need different values):

Add the Name OS_ACTIVITY_MODE and the Value ${DEBUG_ACTIVITY_MODE} and check it (in Product -> Scheme -> Edit Scheme -> Run -> Arguments -> Environment).

Add User-Defined Setting DEBUG_ACTIVITY_MODE, then add Any iOS Simulator SDK for Debug and set it's value to disable (in Project -> Build settings -> + -> User-Defined Setting)

If you use auto-layout.

button.titleLabel?.adjustsFontSizeToFitWidth = true
button.titleLabel?.numberOfLines = 2

I had an error with an array getting the max and the min so my solution was:

int max = Arrays.stream(arrayWithInts).max().getAsInt();
int min = Arrays.stream(arrayWithInts).min().getAsInt();

Functions based on mach_absolute_time are good for short measurements.
But for long measurements important caveat is that they stop ticking while device is asleep.

There is a function to get time since boot. It doesn't stop while sleeping. Also, gettimeofday is not monotonic, but in my experiments I've always see that boot time changes when system time changes, so I think it should work fine.

func timeSinceBoot() -> TimeInterval
{
    var bootTime = timeval()
    var currentTime = timeval()
    var timeZone = timezone()

    let mib = UnsafeMutablePointer<Int32>.allocate(capacity: 2)
    mib[0] = CTL_KERN
    mib[1] = KERN_BOOTTIME
    var size = MemoryLayout.size(ofValue: bootTime)

    var timeSinceBoot = 0.0

    gettimeofday(&currentTime, &timeZone)

    if sysctl(mib, 2, &bootTime, &size, nil, 0) != -1 && bootTime.tv_sec != 0 {
        timeSinceBoot = Double(currentTime.tv_sec - bootTime.tv_sec)
        timeSinceBoot += Double(currentTime.tv_usec - bootTime.tv_usec) / 1000000.0
    }
    return timeSinceBoot
}

And since iOS 10 and macOS 10.12 we can use CLOCK_MONOTONIC:

if #available(OSX 10.12, *) {
    var uptime = timespec()
    if clock_gettime(CLOCK_MONOTONIC_RAW, &uptime) == 0 {
        return Double(uptime.tv_sec) + Double(uptime.tv_nsec) / 1000000000.0
    }
}

To sum it up:

• Date.timeIntervalSinceReferenceDate — changes when system time changes, not monotonic
• CFAbsoluteTimeGetCurrent() — not monotonic, may go backward
• CACurrentMediaTime() — stops ticking when device is asleep
• timeSinceBoot() — doesn't sleep, but might be not monotonic
• CLOCK_MONOTONIC — doesn't sleep, monotonic, supported since iOS 10

All of the answers (at the time of this writing) assume each of Redis, MongoDB, and perhaps an SQL-based relational database are essentially the same tool: "store data". They don't consider data models at all.

MongoDB: Complex Data

MongoDB is a document store. To compare with an SQL-driven relational database: relational databases simplify to indexed CSV files, each file being a table; document stores simplify to indexed JSON files, each file being a document, with multiple files grouped together.

JSON files are similar in structure to XML and YAML files, and to dictionaries as in Python, so think of your data in that sort of hierarchy. When indexing, the structure is the key: A document contains named keys, which contain either further documents, arrays, or scalar values. Consider the below document.

{
  _id:  0x194f38dc491a,
  Name:  "John Smith",
  PhoneNumber:
    Home: "555 999-1234",
    Work: "555 999-9876",
    Mobile: "555 634-5789"
  Accounts:
    - "379-1111"
    - "379-2574"
    - "414-6731"
}

The above document has a key, PhoneNumber.Mobile, which has value 555 634-5789. You can search through a collection of documents where the key, PhoneNumber.Mobile, has some value; they're indexed.

It also has an array of Accounts which hold multiple indexes. It is possible to query for a document where Accounts contains exactly some subset of values, all of some subset of values, or any of some subset of values. That means you can search for Accounts = ["379-1111", "379-2574"] and not find the above; you can search for Accounts includes ["379-1111"] and find the above document; and you can search for Accounts includes any of ["974-3785","414-6731"] and find the above and whatever document includes account "974-3785", if any.

Documents go as deep as you want. PhoneNumber.Mobile could hold an array, or even a sub-document (PhoneNumber.Mobile.Work and PhoneNumber.Mobile.Personal). If your data is highly structured, documents are a large step up from relational databases.

If your data is mostly flat, relational, and rigidly structured, you're better off with a relational database. Again, the big sign is whether your data models best to a collection of interrelated CSV files or a collection of XML/JSON/YAML files.

For most projects, you'll have to compromise, accepting a minor work-around in some small areas where either SQL or Document Stores don't fit; for some large, complex projects storing a broad spread of data (many columns; rows are irrelevant), it will make sense to store some data in one model and other data in another model. Facebook uses both SQL and a graph database (where data is put into nodes, and nodes are connected to other nodes); Craigslist used to use MySQL and MongoDB, but had been looking into moving entirely onto MongoDB. These are places where the span and relationship of the data faces significant handicaps if put under one model.

Redis: Key-Value

Redis is, most basically, a key-value store. Redis lets you give it a key and look up a single value. Redis itself can store strings, lists, hashes, and a few other things; however, it only looks up by name.

Cache invalidation is one of computer science's hard problems; the other is naming things. That means you'll use Redis when you want to avoid hundreds of excess look-ups to a back-end, but you'll have to figure out when you need a new look-up.

The most obvious case of invalidation is update on write: if you read user:Simon:lingots = NOTFOUND, you might SELECT Lingots FROM Store s INNER JOIN UserProfile u ON s.UserID = u.UserID WHERE u.Username = Simon and store the result, 100, as SET user:Simon:lingots = 100. Then when you award Simon 5 lingots, you read user:Simon:lingots = 100, SET user:Simon:lingots = 105, and UPDATE Store s INNER JOIN UserProfile u ON s.UserID = u.UserID SET s.Lingots = 105 WHERE u.Username = Simon. Now you have 105 in your database and in Redis, and can get user:Simon:lingots without querying the database.

The second case is updating dependent information. Let's say you generate chunks of a page and cache their output. The header shows the player's experience, level, and amount of money; the player's Profile page has a block that shows their statistics; and so forth. The player gains some experience. Well, now you have several templates:Header:Simon, templates:StatsBox:Simon, templates:GrowthGraph:Simon, and so forth fields where you've cached the output of a half-dozen database queries run through a template engine. Normally, when you display these pages, you say:

$t = GetStringFromRedis("templates:StatsBox:" + $playerName);
if ($t == null) {
  $t = BuildTemplate("StatsBox.tmpl",
                     GetStatsFromDatabase($playerName));
  SetStringInRedis("Templates:StatsBox:" + $playerName, $t);
}
print $t;

Because you just updated the results of GetStatsFromDatabase("Simon"), you have to drop templates:*:Simon out of your key-value cache. When you try to render any of these templates, your application will churn away fetching data from your database (PostgreSQL, MongoDB) and inserting it into your template; then it will store the result in Redis and, hopefully, not bother making database queries and rendering templates the next time it displays that block of output.

Redis also lets you do publisher-subscribe message queues and such. That's another topic entirely. Point here is Redis is a key-value cache, which differs from a relational database or a document store.

Conclusion

Pick your tools based on your needs. The largest need is usually data model, as that determines how complex and error-prone your code is. Specialized applications will lean on performance, places where you write everything in a mixture of C and Assembly; most applications will just handle the generalized case and use a caching system such as Redis or Memcached, which is a lot faster than either a high-performance SQL database or a document store.

This is the bad practice but you can use this technique to close modal by calling close button in javascript. This will close modal after 3 seconds.

<!DOCTYPE html>
<html lang="en">
<head>
<title>Bootstrap Example</title>
<meta charset="utf-8">
<meta name="viewport" content="width=device-width, initial-scale=1">
<link rel="stylesheet" href="https://maxcdn.bootstrapcdn.com/bootstrap/3.3.7/css/bootstrap.min.css">
<script src="https://ajax.googleapis.com/ajax/libs/jquery/1.12.4/jquery.min.js"></script>
<script src="https://maxcdn.bootstrapcdn.com/bootstrap/3.3.7/js/bootstrap.min.js"></script>

<script>
window.onload=function()
{
setInterval(function(){ 

$("#closemodal").click();
}, 3000);

}
</script> 
</head>
<body>

   <div class="container">
 <h2>Modal Example</h2>
<!-- Trigger the modal with a button -->
<button type="button" class="btn btn-info btn-lg" data-toggle="modal"   data-target="#myModal">Open Modal</button>

<!-- Modal -->
<div class="modal fade" id="myModal" role="dialog">
<div class="modal-dialog">

    <!-- Modal content-->
  <div class="modal-content">
    <div class="modal-header">
      <button type="button" class="close" data-dismiss="modal">&times;</button>
      <h4 class="modal-title">Modal Header</h4>
    </div>
    <div class="modal-body">
      <p>Some text in the modal.</p>
    </div>
    <div class="modal-footer">
      <button type="button" class="btn btn-default" data-dismiss="modal" id="closemodal">Close</button>
    </div>
  </div>

</div>
</div>

 </div>

</body>
</html>

TL;DR

1- To modify current URL and add / inject it (the new modified URL) as a new URL entry to history list, use pushState:

window.history.pushState({}, document.title, "/" + "my-new-url.html");

2- To replace current URL without adding it to history entries, use replaceState:

window.history.replaceState({}, document.title, "/" + "my-new-url.html");

3- Depending on your business logic, pushState will be useful in cases such as:

• you want to support the browser's back button

• you want to create a new URL, add/insert/push the new URL to history entries, and make it current URL

• allowing users to bookmark the page with the same parameters (to show the same contents)

• to programmatically access the data through the stateObj then parse from the anchor

As I understood from your comment, you want to clean your URL without redirecting again.

Note that you cannot change the whole URL. You can just change what comes after the domain's name. This means that you cannot change www.example.com/ but you can change what comes after .com/

www.example.com/old-page-name => can become =>  www.example.com/myNewPaage20180322.php

Background

We can use:

1- The pushState() method if you want to add a new modified URL to history entries.

2- The replaceState() method if you want to update/replace current history entry.

.replaceState() operates exactly like .pushState() except that .replaceState() modifies the current history entry instead of creating a new one. Note that this doesn't prevent the creation of a new entry in the global browser history.

.replaceState() is particularly useful when you want to update the state object or URL of the current history entry in response to some user action.

Code

To do that I will use The pushState() method for this example which works similarly to the following format:

var myNewURL = "my-new-URL.php";//the new URL
window.history.pushState("object or string", "Title", "/" + myNewURL );

Feel free to replace pushState with replaceState based on your requirements.

You can substitute the paramter "object or string" with {} and "Title" with document.title so the final statment will become:

window.history.pushState({}, document.title, "/" + myNewURL );

Results

The previous two lines of code will make a URL such as:

https://domain.tld/some/randome/url/which/will/be/deleted/

To become:

https://domain.tld/my-new-url.php

Action

Now let's try a different approach. Say you need to keep the file's name. The file name comes after the last / and before the query string ?.

http://www.someDomain.com/really/long/address/keepThisLastOne.php?name=john

Will be:

http://www.someDomain.com/keepThisLastOne.php

Something like this will get it working:

 //fetch new URL
 //refineURL() gives you the freedom to alter the URL string based on your needs. 
var myNewURL = refineURL();

//here you pass the new URL extension you want to appear after the domains '/'. Note that the previous identifiers or "query string" will be replaced. 
window.history.pushState("object or string", "Title", "/" + myNewURL );


//Helper function to extract the URL between the last '/' and before '?' 
//If URL is www.example.com/one/two/file.php?user=55 this function will return 'file.php' 
 //pseudo code: edit to match your URL settings  

   function refineURL()
{
    //get full URL
    var currURL= window.location.href; //get current address
    
    //Get the URL between what's after '/' and befor '?' 
    //1- get URL after'/'
    var afterDomain= currURL.substring(currURL.lastIndexOf('/') + 1);
    //2- get the part before '?'
    var beforeQueryString= afterDomain.split("?")[0];  
 
    return beforeQueryString;     
}

UPDATE:

For one liner fans, try this out in your console/firebug and this page URL will change:

    window.history.pushState("object or string", "Title", "/"+window.location.href.substring(window.location.href.lastIndexOf('/') + 1).split("?")[0]);

This page URL will change from:

http://stackoverflow.com/questions/22753052/remove-url-parameters-without-refreshing-page/22753103#22753103

To

http://stackoverflow.com/22753103#22753103

Note: as Samuel Liew indicated in the comments below, this feature has been introduced only for HTML5.

An alternative approach would be to actually redirect your page (but you will lose the query string `?', is it still needed or the data has been processed?).

window.location.href =  window.location.href.split("?")[0]; //"http://www.newurl.com";

Note 2:

Firefox seems to ignore window.history.pushState({}, document.title, ''); when the last argument is an empty string. Adding a slash ('/') worked as expected and removed the whole query part of the url string. Chrome seems to be fine with an empty string.

Nothing dangerous about this. In fact, it is beautiful. You can add default value if that is desirable, for example:

CODE

int x = x1 ?? x2 ?? x3 ?? x4 ?? 0;

On Linux, with NuGet CLI, the commands are similar. To install my.nupkg, run

nuget add -Source some/directory my.nupkg

Then run dotnet restore from that directory

dotnet restore --source some/directory Project.sln

or add that directory as a NuGet source

nuget sources Add -Name MySource -Source some/directory

and then tell msbuild to use that directory with /p:RestoreAdditionalSources=MySource or /p:RestoreSources=MySource. The second switch will disable all other sources, which is good for offline scenarios, for example.

When you cherry-pick, it creates a new commit with a new SHA. If you do:

git cherry-pick -x <sha>

then at least you'll get the commit message from the original commit appended to your new commit, along with the original SHA, which is very useful for tracking cherry-picks.

I rarely employ cursors, but I just discovered one other item that can bite you here, the scope of the cursor name.

If the database CURSOR_DEFAULT is global, you will get the "cursor already exists" error if you declare a cursor in a stored procedure with a particular name (eg "cur"), and while that cursor is open you call another stored procedure which declares and opens a cursor with the same name (eg "cur"). The error will occur in the nested stored procedure when it attempts to open "cur".

Run this bit of sql to see your CURSOR_DEFAULT:

select is_local_cursor_default from sys.databases where name = '[your database name]'

If this value is "0" then how you name your nested cursor matters!

I've installed and use VB6 for legacy projects many times on Windows 7.

What I have done and never came across any issues, is to install VB6, ignore the errors and then proceed to install the latest service pack, currently SP6.

Download here: http://www.microsoft.com/en-us/download/details.aspx?id=5721

Bonus: Also once you install it and realize that scrolling doesn't work, use the below: http://www.joebott.com/vb6scrollwheel.htm

What I've done is a bit manual, but I:

1. Merged the branches normally; Reverted the merge with revert;
2. Checked out all my files to HEAD~1, that is, their state in the merge commit;
3. Rebased my commits to hide this hackery from the commit history.

Ugly? Yes. Easy to remember? Also yes.

Daniel Kutik's answer is correct, but it can be even more safe, with database renaming.

So, the truly safe way is:

1. Create new database with the different encoding and name
2. Dump your database
3. Restore dump to the new DB
4. Test that your application runs correctly with the new DB
5. Rename old DB to something meaningful
6. Rename new DB
7. Test application again
8. Drop the old database

In case of emergency, just rename DBs back

You will be able to get the current iteration's index for the map method through its 2nd parameter.

Example:

const list = [ 'h', 'e', 'l', 'l', 'o'];
list.map((currElement, index) => {
  console.log("The current iteration is: " + index);
  console.log("The current element is: " + currElement);
  console.log("\n");
  return currElement; //equivalent to list[index]
});

Output:

The current iteration is: 0 <br>The current element is: h

The current iteration is: 1 <br>The current element is: e

The current iteration is: 2 <br>The current element is: l

The current iteration is: 3 <br>The current element is: l 

The current iteration is: 4 <br>The current element is: o

See also: https://developer.mozilla.org/docs/Web/JavaScript/Reference/Global_Objects/Array/map

Parameters

callback - Function that produces an element of the new Array, taking three arguments:

1) currentValue
The current element being processed in the array.

2) index
The index of the current element being processed in the array.

3) array
The array map was called upon.

As JavaScript is a client-side language and PHP is a server-side language you would need to physically push the variable to the PHP script, by either including the variable on the page load of the PHP script (script.php?var=test), which really has nothing to do with JavaScript, or by passing the variable to the PHP via an AJAX/AHAH call each time the variable is changed.

If you did want to go down the second path, you'd be looking at XMLHttpRequest, or my preference, jQuerys Ajax calls: http://docs.jquery.com/Ajax

There are two commands which will work in this situation,

root>git reset --hard HEAD~1

root>git push -f

For more git commands refer this page

It is a good idea to create a dll class library that contain all common functionality. Each solution can reference this dll indepently regardless of other solutions.

Infact , this is how our sources are organized in my work (and I believe in many other places).

By the way , Solution can't explicitly depend on another solution.

Statically typed languages like C++, Java and Dynamically typed languages like Python differ only in terms of the execution of the type of the variable. Statically typed languages have static data type for the variable, here the data type is checked during compiling so debugging is much simpler...whereas Dynamically typed languages don't do the same, the data type is checked which executing the program and hence the debugging is bit difficult.

Moreover they have a very small difference and can be related with strongly typed and weakly typed languages. A strongly typed language doesn't allow you to use one type as another eg. C and C++ ...whereas weakly typed languages allow eg.python

Write below code in your MainActivity.java file instead of your code.

public class MainActivity extends Activity implements OnClickListener {

    @Override
    protected void onCreate(Bundle savedInstanceState) {
        super.onCreate(savedInstanceState);
        setContentView(R.layout.activity_main);

        Button mBtn1 = (Button) findViewById(R.id.mBtn1);
        mBtn1.setOnClickListener(this);
    }

    @Override
    public boolean onCreateOptionsMenu(Menu menu) {
        // Inflate the menu; this adds items to the action bar if it is present.
        getMenuInflater().inflate(R.menu.activity_main, menu);
        return true;
    }

    @Override
    public void onClick(View v) {
        Log.i("clicks","You Clicked B1");
        Intent i=new Intent(MainActivity.this, MainActivity2.class);
        startActivity(i);
    }
}

And Declare MainActivity2 into your Androidmanifest.xml file using below code.

<activity
    android:name=".MainActivity2"
    android:label="@string/title_activity_main">
</activity>

The problem I was having is my css media queries and my IF statement in Jquery clashing. They were both set to 700px but one would think it's hit 700px before the other.

To get around this I created a empty Div right at the top of my HTML(outside my main container)

<div id="max-width"></div>

In css I set this div to display none

 #max-width {
        display: none;
    }

In my JS created a function

var hasSwitched = function () {
    var maxWidth = parseInt($('#max-width').css('max-width'), 10);
    return !isNaN(maxWidth);
};

So in my IF statement instead of saying if (hasSwitched<700) perform the following code, I did the following

if (!hasSwitched()) { Your code

}

else{ your code

}

By doing this CSS tells Jquery when it's hit 700px. So css and jquery are both synchronized... rather than having a couple of pixels difference. Do give this a try peeps it shall definitely not disappoint.

To get this same logic working for IE8 I used the Respond.js plugin(which also definitely works) It lets you use media queries for IE8. Only thing that wasn't supported was the viewport width and viewport height... hence my reason to try get my css and JS working together. Hope this helps you guys

you need to place the opening brace after main , not before it

#include <stdio.h>
#include <stdlib.h>
#include <time.h>

int main(void)
{

ko.applyBindings accepts a second parameter that is a DOM element to use as the root.

This would let you do something like:

<div id="one">
  <input data-bind="value: name" />
</div>

<div id="two">
  <input data-bind="value: name" />
</div>

<script type="text/javascript">
  var viewModelA = {
     name: ko.observable("Bob")
  };

  var viewModelB = {
     name: ko.observable("Ted")
  };

  ko.applyBindings(viewModelA, document.getElementById("one"));
  ko.applyBindings(viewModelB, document.getElementById("two"));
</script>

So, you can use this technique to bind a viewModel to the dynamic content that you load into your dialog. Overall, you just want to be careful not to call applyBindings multiple times on the same elements, as you will get multiple event handlers attached.

Since all the players are numbered I would just use an ArrayList<Player>()

Something like

List<Player> players = new ArrayList<Player>();

System.out.printf("Give the number of the players ");
int number_of_players = scanner.nextInt();
scanner.nextLine(); // discard the rest of the line.

for(int k = 0;k < number_of_players; k++){
     System.out.printf("Give the name of player %d: ", k + 1);
     String name_of_player = scanner.nextLine();
     players.add(new Player(name_of_player,0)); //k=id and 0=score
}

for(Player player: players) {  
    System.out.println("Name of player in this round:" + player.getName());

All of these techniques are called 'Extended Inserts" in Postgres terminology, and as of the 24th of November 2016, it's still a ton faster than psychopg2's executemany() and all the other methods listed in this thread (which i tried before coming to this answer).

Here's some code which doesnt use cur.mogrify and is nice and simply to get your head around:

valueSQL = [ '%s', '%s', '%s', ... ] # as many as you have columns.
sqlrows = []
rowsPerInsert = 3 # more means faster, but with diminishing returns..
for row in getSomeData:
        # row == [1, 'a', 'yolo', ... ]
        sqlrows += row
        if ( len(sqlrows)/len(valueSQL) ) % rowsPerInsert == 0:
                # sqlrows == [ 1, 'a', 'yolo', 2, 'b', 'swag', 3, 'c', 'selfie' ]
                insertSQL = 'INSERT INTO "twitter" VALUES ' + ','.join(['(' + ','.join(valueSQL) + ')']*rowsPerInsert)
                cur.execute(insertSQL, sqlrows)
                con.commit()
                sqlrows = []
insertSQL = 'INSERT INTO "twitter" VALUES ' + ','.join(['(' + ','.join(valueSQL) + ')']*len(sqlrows))
cur.execute(insertSQL, sqlrows)
con.commit()

But it should be noted that if you can use copy_from(), you should use copy_from ;)

git remote prune origin, as suggested in the other answer, will remove all such stale branches. That's probably what you'd want in most cases, but if you want to just remove that particular remote-tracking branch, you should do:

git branch -d -r origin/coolbranch

(The -r is easy to forget...)

-r in this case will "List or delete (if used with -d) the remote-tracking branches." according to the Git documentation found here: https://git-scm.com/docs/git-branch

Dan Benjamin's Hivelogic article Installing Ruby, RubyGems, and Rails on Snow Leopard is the recommended place to go although the article is for 1.8, so here's a Ruby 1.9-specific install on Snow Leopard. Watch out for the 64-bit thing... either go all 64-bit 'fat' (as is - for example - Apache on OS X, which can cause problems with 32-bit libraries) or check any gems you're likely to use to make sure they're okay for 64-bit.

You can write a very elegant solution using a functional style.

class Object
  def hashify
    Hash[instance_variables.map { |v| [v.to_s[1..-1].to_sym, instance_variable_get v] }]
  end
end

I found the answer on GitHub for Swift2

https://github.com/Alamofire/Alamofire/issues/641

Alamofire.request(.GET, URLString, parameters: ["foo": "bar"])
    .responseJSON { request, response, result in
        switch result {
        case .Success(let JSON):
            print("Success with JSON: \(JSON)")

        case .Failure(let data, let error):
            print("Request failed with error: \(error)")

            if let data = data {
                print("Response data: \(NSString(data: data, encoding: NSUTF8StringEncoding)!)")
            }
        }
    }

Pure css way of trim multiline text with ellipsis

Adjust text container's hight, control line to break by -webkit-line-clamp: 2;

.block-ellipsis {
  display: block;
  display: -webkit-box;
  max-width: 100%;
  height: 30px;
  margin: 0 auto;
  font-size: 14px;
  line-height: 1;
  -webkit-line-clamp: 2;
  -webkit-box-orient: vertical;
  overflow: hidden;
  text-overflow: ellipsis;
}

You can only call instance method like do() (which is an illegal method name, incidentally) against an instance of the class:

public static void main(String[] args){
  new Foo().doSomething();
}

public void doSomething(){}

Alternatively, make doSomething() static as well, if that works for your design.

I've been in a situation like you (JPA/Hibernate sequence for non @Id field) and I ended up creating a trigger in my db schema that add a unique sequence number on insert. I just never got it to work with JPA/Hibernate

I've similar issue and resolved by creating custom class by extending with ListView.

ScrollableListView.java

import android.content.Context;
import android.util.AttributeSet;
import android.widget.ListView;

public class ScrollableListView extends ListView {

    public ScrollableListView (Context context, AttributeSet attrs) {
        super(context, attrs);
    }

    public ScrollableListView (Context context) {
        super(context);
    }

    public ScrollableListView (Context context, AttributeSet attrs, int defStyle) {
        super(context, attrs, defStyle);
    }

    @Override
    public void onMeasure(int widthMeasureSpec, int heightMeasureSpec) {
        int expandSpec = MeasureSpec.makeMeasureSpec(Integer.MAX_VALUE >> 2,
                MeasureSpec.AT_MOST);
        super.onMeasure(widthMeasureSpec, expandSpec);
    }
}

Usage:

<com.my.package.ScrollableListView
    android:id="@+id/listview"
    android:layout_width="match_parent"
    android:layout_height="wrap_content"/>

I know this is an old question.

Here's another option - attending to different platform requirements - Source

<link rel='shortcut icon' type='image/vnd.microsoft.icon' href='/favicon.ico'> <!-- IE -->
<link rel='apple-touch-icon' type='image/png' href='/icon.57.png'> <!-- iPhone -->
<link rel='apple-touch-icon' type='image/png' sizes='72x72' href='/icon.72.png'> <!-- iPad -->
<link rel='apple-touch-icon' type='image/png' sizes='114x114' href='/icon.114.png'> <!-- iPhone4 -->
<link rel='icon' type='image/png' href='/icon.114.png'> <!-- Opera Speed Dial, at least 144×114 px -->

This is the broadest approach I have found so far.

Ultimately the decision depends on your own needs. Ask yourself, who is your target audience?

UPDATE May 27, 2018: As expected, time goes by and things change. But there's good news too. I found a tool called Real Favicon Generator that generates all the required lines for the icon to work on all modern browsers and platforms. It doesn't handle backwards compatibility though.

A quick fix where nothing else works:

const a.b = 5 // error

const a['b'] = 5 // error if ts-lint rule no-string-literal is enabled

const B = 'b'
const a[B] = 5 // always works

Not good practice but provides a solution without needing to turn off no-string-literal

Maybe a syntax error in your case, you may change the line to:

directory = str(r"C:\Users\Josh\Desktop\20130216").replace('\\','\\\\')

which give you the right following output:

C:\\Users\\Josh\\Desktop\\20130216

I have overcome a similar problem with a Custom JsonDeSerializer. I tried to make it a bit generic but still not enough. It is a solution though that fits my needs.

First of all you need to implement a new JsonDeserializer for Map objects.

public class MapDeserializer<T, U> implements JsonDeserializer<Map<T, U>>

And the deserialize method will look similar to this:

public Map<T, U> deserialize(JsonElement json, Type typeOfT, JsonDeserializationContext context)
        throws JsonParseException {

        if (!json.isJsonObject()) {
            return null;
        }

        JsonObject jsonObject = json.getAsJsonObject();
        Set<Entry<String, JsonElement>> jsonEntrySet = jsonObject.entrySet();
        Map<T, U> deserializedMap = new HashMap<T, U>();

        for (Entry<java.lang.String, JsonElement> entry : jsonEntrySet) {
            try {
                U value = context.deserialize(entry.getValue(), getMyType());
                deserializedMap.put((T) entry.getKey(), value);
            } catch (Exception ex) {
                logger.info("Could not deserialize map.", ex);
            }
        }

        return deserializedMap;
    }

The con with this solution, is that my Map's key is always of Type "String". However by chaning some things someone can make it generic. In addition, i need to say, that the value's class should be passed in the constructor. So the method getMyType() in my code returns the type of the Map's values, which was passed in the constructor.

You can reference this post How do I write a custom JSON deserializer for Gson? in order to learn more about custom deserializers.

Get the last word in Kotlin:

String.substringAfterLast(" ")

This was already in a comment, but deserves its own answer: Without editing the config files: in mysql, as root, do

SET global general_log_file='/tmp/mysql.log'; 
SET global log_output = 'file';
SET global general_log = on;

Don't forget to turn it off afterwards:

SET global general_log = off;

An alternative solution is just to remove the 'dropdown-toggle' class from the anchor. After this clicking will no longer trigger the dropwon.js, so you may want to have the submenu to show on hover.

When you create local variables inside a function that are created on the stack, they most likely get overwritten in memory when exiting the function.

So code like this in most C++ implementations will not work:

char[] populateChar()
{
    char* ch = "wonet return me";
    return ch;
}

A fix is to create the variable that want to be populated outside the function or where you want to use it, and then pass it as a parameter and manipulate the function, example:

void populateChar(char* ch){
    strcpy(ch, "fill me, Will. This will stay", size); // This will work as long as it won't overflow it.
}

int main(){
    char ch[100]; // Reserve memory on the stack outside the function
    populateChar(ch); // Populate the array
}

A C++11 solution using std::move(ch) to cast lvalues to rvalues:

void populateChar(char* && fillme){
    fillme = new char[20];
    strcpy(fillme, "this worked for me");
}

int main(){
    char* ch;
    populateChar(std::move(ch));
    return 0;
}

Or this option in C++11:

char* populateChar(){
    char* ch = "test char";
    // Will change from lvalue to r value
    return std::move(ch);
}

int main(){
    char* ch = populateChar();
    return 0;
}

Swift 5:

When deal with collectionView. Reloading only 1 item or several items with animation. I try some different animation options when changing cell image, no difference, so I don't indicate animation name here.

UIView.animate(withDuration: 1.0) { [weak self] in
                guard let self = self else { return print("gotchya!") }
                self.collectionView.reloadItems(at: [indexPath])
            }

You want to use coalesce():

where coalesce(email, email2) like '%[email protected]%'

If you want to handle empty strings ('') versus NULL, a case works:

where (case when email is NULL or email = '' then email2 else email end) like '%[email protected]%'

And, if you are worried about the string really being just spaces:

where (case when email is NULL or ltrim(email) = '' then email2 else email end) like '%[email protected]%'

As an aside, the sample if statement is really saying "If email starts with a number larger than 0". This is because the comparison is to 0, a number. MySQL implicitly tries to convert the string to a number. So, '[email protected]' would fail, because the string would convert as 0. As would '[email protected]'. But, '[email protected]' and '[email protected]' would succeed.

the reserved word "in" is used to look inside an object that can be iterated over.

list_obj = ['a', 'b', 'c']
tuple_obj = ('a', 1, 2.0)
dict_obj = {'a': 1, 'b': 2.0}
obj_to_find = 'c'
if obj_to_find in list_obj:
    print('Object {0} is in {1}'.format(obj_to_find, list_obj))
obj_to_find = 2.0
if obj_to_find in tuple_obj:
    print('Object {0} is in {1}'.format(obj_to_find, tuple_obj))
obj_to_find = 'b'
if obj_to_find in dict_obj:
    print('Object {0} is in {1}'.format(obj_to_find, dict_obj))

Output:

Object c is in ['a', 'b', 'c']
Object 2.0 is in ('a', 1, 2.0)
Object b is in {'a': 1, 'b': 2.0}

However

cannot_iterate_over = 5.5
obj_to_find = 5.5
if obj_to_find in cannot_iterate_over:
    print('Object {0} is in {1}'.format(obj_to_find, cannot_iterate_over))

will throw

Traceback (most recent call last):
File "/home/jgranger/workspace/sandbox/src/csv_file_creator.py", line 43, in <module>
if obj_to_find in cannot_iterate_over:
TypeError: argument of type 'float' is not iterable

In your case, raw_input("> ") returns iterable object or it will throw TypeError

You can't, and you shouldn't.

Every other approach / alternative will only cause really bad user engagement.

That's my opinion.

\\. is the simple answer. Here is simple code for your help.

while (line != null) {
    //             
    String[] words = line.split("\\.");
    wr = "";
    mean = "";
    if (words.length > 2) {
        wr = words[0] + words[1];
        mean = words[2];

    } else {
        wr = words[0];
        mean = words[1];
    }
}

SMTP -> FROM SERVER:
SMTP -> FROM SERVER:
SMTP -> ERROR: EHLO not accepted from server:

that's typical of trying to connect to a SSL service with a client that's not using SSL

SMTP Error: Could not authenticate.

no suprise there having failed to start an SMTP conversation authentigation is not an option,.

phpmailer doesn't do implicit SSL (aka TLS on connect, SMTPS) Short of rewriting smtp.class.php to include support for it there it no way to do what you ask.

Use port 587 with explicit SSL (aka TLS, STARTTLS) instead.

Missing ; after var_dump($row)

If you already have a number of dates already highlighted and want to determine which date was last clicked then you'll need the following:

$('#startdate').data('datepicker').viewDate

viewDate returns a JavaScript date object so you'll need to handle it accordingly.

1. Go to http://www.nuget.org
2. Search for desired package. For example: Microsoft.Owin.Host.SystemWeb
3. Download the package by clicking the Download link on the left.
4. Do step 3 for the dependencies which are not already installed.
5. Store all downloaded packages in a custom folder. The default is c:\Package source.
6. Open Nuget Package Manager in Visual Studio and make sure you have an "Available package source" that points to the specified address in step 5; If not, simply add one by providing a custom name and address. Click OK.
7. At this point you should be able to install the package exactly the same way you would install an online package through the interface. You probably won't be able to install the package using NuGet console.

Consider the easy, lightweight Java library EasyFlow. From their docs:

With EasyFlow you can:

• implement complex logic but keep your code simple and clean
• handle asynchronous calls with ease and elegance
• avoid concurrency by using event-driven programming approach
• avoid StackOverflow error by avoiding recursion
• simplify design, programming and testing of complex java applications

Simple short answer is this:

xcopy /Y /I "$(SolutionDir)<my-src-path>" "$(SolutionDir)<my-dst-path>\"

I tried this and it worked :

git stash && git add . && git stash pop

git stash will only put all modified tracked files into separate stack, then left over files are untracked files. Then by doing git add . will stage all files untracked files, as required. Eventually, to get back all modified files from stack by doing git stash pop

Find parameters

The parameters find function takes are as follows:

1. conditions «Object».
2. [projection] «Object|String» optional fields to return, see Query.prototype.select()
3. [options] «Object» optional see Query.prototype.setOptions()
4. [callback] «Function»

How to limit

const Post = require('./models/Post');

Post.find(
  { published: true }, 
  null, 
  { sort: { 'date': 'asc' }, limit: 20 },
  function(error, posts) {
   if (error) return `${error} while finding from post collection`;

   return posts; // posts with sorted length of 20
  }
);

Extra Info

Mongoose allows you to query your collections in different ways like: Official Documentation

// named john and at least 18
MyModel.find({ name: 'john', age: { $gte: 18 }});

// executes, passing results to callback
MyModel.find({ name: 'john', age: { $gte: 18 }}, function (err, docs) {});

// executes, name LIKE john and only selecting the "name" and "friends" fields
MyModel.find({ name: /john/i }, 'name friends', function (err, docs) { })

// passing options
MyModel.find({ name: /john/i }, null, { skip: 10 })

// passing options and executes
MyModel.find({ name: /john/i }, null, { skip: 10 }, function (err, docs) {});

// executing a query explicitly
var query = MyModel.find({ name: /john/i }, null, { skip: 10 })
query.exec(function (err, docs) {});

// using the promise returned from executing a query
var query = MyModel.find({ name: /john/i }, null, { skip: 10 });
var promise = query.exec();
promise.addBack(function (err, docs) {});

I will add to the above answer that the reset function should also assign state like so:

reset() {
  this.state = initialState;
  this.setState(initialState);
}

The reason being that if your state picks up a property that wasn't in the initial state, that key/value won't be cleared out, as setState just updates existing keys. Assignment is not enough to get the component to re-render, so include the setState call as well -- you could even get away with this.setState({}) after the assignment.

Yes! In your settings.py define the following

LOGIN_REDIRECT_URL = '/your-path'

And have '/your-path' be a simple View that looks up self.request.user and does whatever logic it needs to return a HttpResponseRedirect object.

A better way might be to define a simple URL like '/simple' that does the lookup logic there. The URL looks more beautiful, saves you some work, etc.

$result = mysql_query($query) or die("Data not found."); 
$rows=array(); 
while($r=mysql_fetch_assoc($result))
{ 
$rows[]=$r;
}
header("Content-type:application/json"); 
echo json_encode($rows);

First, a short description of $on(), $broadcast() and $emit():

• .$on(name, listener) - Listens for a specific event by a given name
• .$broadcast(name, args) - Broadcast an event down through the $scope of all children
• .$emit(name, args) - Emit an event up the $scope hierarchy to all parents, including the $rootScope

Based on the following HTML (see full example here):

<div ng-controller="Controller1">
    <button ng-click="broadcast()">Broadcast 1</button>
    <button ng-click="emit()">Emit 1</button>
</div>

<div ng-controller="Controller2">
    <button ng-click="broadcast()">Broadcast 2</button>
    <button ng-click="emit()">Emit 2</button>
    <div ng-controller="Controller3">
        <button ng-click="broadcast()">Broadcast 3</button>
        <button ng-click="emit()">Emit 3</button>
        <br>
        <button ng-click="broadcastRoot()">Broadcast Root</button>
        <button ng-click="emitRoot()">Emit Root</button>
    </div>
</div>

The fired events will traverse the $scopes as follows:

• Broadcast 1 - Will only be seen by Controller 1 $scope
• Emit 1 - Will be seen by Controller 1 $scope then $rootScope
• Broadcast 2 - Will be seen by Controller 2 $scope then Controller 3 $scope
• Emit 2 - Will be seen by Controller 2 $scope then $rootScope
• Broadcast 3 - Will only be seen by Controller 3 $scope
• Emit 3 - Will be seen by Controller 3 $scope, Controller 2 $scope then $rootScope
• Broadcast Root - Will be seen by $rootScope and $scope of all the Controllers (1, 2 then 3)
• Emit Root - Will only be seen by $rootScope

JavaScript to trigger events (again, you can see a working example here):

app.controller('Controller1', ['$scope', '$rootScope', function($scope, $rootScope){
    $scope.broadcastAndEmit = function(){
        // This will be seen by Controller 1 $scope and all children $scopes 
        $scope.$broadcast('eventX', {data: '$scope.broadcast'});

        // Because this event is fired as an emit (goes up) on the $rootScope,
        // only the $rootScope will see it
        $rootScope.$emit('eventX', {data: '$rootScope.emit'});
    };
    $scope.emit = function(){
        // Controller 1 $scope, and all parent $scopes (including $rootScope) 
        // will see this event
        $scope.$emit('eventX', {data: '$scope.emit'});
    };

    $scope.$on('eventX', function(ev, args){
        console.log('eventX found on Controller1 $scope');
    });
    $rootScope.$on('eventX', function(ev, args){
        console.log('eventX found on $rootScope');
    });
}]);

Bash supports a concept called "Positional Parameters". These positional parameters represent arguments that are specified on the command line when a Bash script is invoked.

Positional parameters are referred to by the names $0, $1, $2 ... and so on. $0 is the name of the script itself, $1 is the first argument to the script, $2 the second, etc. $* represents all of the positional parameters, except for $0 (i.e. starting with $1).

An example:

#!/bin/bash
FILE="$1"
externalprogram "$FILE" <other-parameters>

You can change the width and height to be 100%, but it won't cover the browser chrome or the OS shell.

Design decision is because HTML lives inside the browser window. Flash plugins aren't inside the window, so they can go full screen.

This makes sense, otherwise you could make img tags that covered the shell, or make h1 tags so the whole screen was a letter.

Let's not forget math.hypot:

dist = math.hypot(x2-x1, y2-y1)

Here's hypot as part of a snippet to compute the length of a path defined by a list of (x, y) tuples:

from math import hypot

pts = [
    (10,10),
    (10,11),
    (20,11),
    (20,10),
    (10,10),
    ]

# Py2 syntax - no longer allowed in Py3
# ptdiff = lambda (p1,p2): (p1[0]-p2[0], p1[1]-p2[1])
ptdiff = lambda p1, p2: (p1[0]-p2[0], p1[1]-p2[1])

diffs = (ptdiff(p1, p2) for p1, p2 in zip (pts, pts[1:]))
path = sum(hypot(*d) for d in  diffs)
print(path)

for a do - while loop containing try statements

loop = True
while loop:
    generic_stuff()
    try:
        questionable_stuff()
#       to break from successful completion
#       loop = False  
    except:
        optional_stuff()
#       to break from unsuccessful completion - 
#       the case referenced in the OP's question
        loop = False
   finally:
        more_generic_stuff()

alternatively, when there's no need for the 'finally' clause

while True:
    generic_stuff()
    try:
        questionable_stuff()
#       to break from successful completion
#       break  
    except:
        optional_stuff()
#       to break from unsuccessful completion - 
#       the case referenced in the OP's question
        break

Rohit's answer seems correct. However, be aware that AndroidStudio's "Instant Run" depends on not having static Context attributes in your code, as far as I know.

1) == evaluates reference equality in this case
2) im not too sure about the equals, but why not simply overriding the compare method and plant it inside MyClass?

To Extend on @Trevedhek answer,

In case the update has to be done with non-unique keys, 4 queries will be need

NOTE: This is not transaction-safe

This can be done using a temp table.

Step 1: Create a temp table keys and the columns you want to update

CREATE TEMPORARY TABLE  temp_table_users
(
    cod_user varchar(50)
    , date varchar(50)
    , user_rol varchar(50)
    ,  cod_office varchar(50)
) ENGINE=MEMORY

Step 2: Insert the values into the temp table

Step 3: Update the original table

UPDATE table_users t1
JOIN temp_table_users tt1 using(user_rol,cod_office)
SET 
t1.cod_office = tt1.cod_office
t1.date = tt1.date

Step 4: Drop the temp table

Your application (Eclipse) needs more memory and JVM is not allocating enough.You can increase the amount of memory JVM allocates by following the answers given here

And in the latest version of angular, you can simply do check router.isActive(routeNameAsString). For example see the example below:

 <div class="collapse navbar-collapse" id="navbarNav">
    <ul class="navbar-nav">
      <li class="nav-item" [class.active] = "router.isActive('/dashboard')">
        <a class="nav-link" href="#">??????? <span class="sr-only">(current)</span></a>
      </li>
      <li class="nav-item" [class.active] = "router.isActive(route.path)" *ngFor="let route of (routes$ | async)">
        <a class="nav-link" href="javascript:void(0)" *ngIf="route.childRoutes && route.childRoutes.length > 0"
          [matMenuTriggerFor]="menu">{{route.name}}</a>
        <a class="nav-link" href="{{route.path}}"
          *ngIf="!route.childRoutes || route.childRoutes.length === 0">{{route.name}}</a>
        <mat-menu #menu="matMenu">
          <span *ngIf="route.childRoutes && route.childRoutes.length > 0">
            <a *ngFor="let child of route.childRoutes" class="nav-link" href="{{route.path + child.path}}"
              mat-menu-item>{{child.name}}</a>
          </span>
        </mat-menu>
      </li>
    </ul>
    <span class="navbar-text mr-auto">
      <small>????</small> {{ (currentUser$ | async) ? (currentUser$ | async).firstName : '?????' }}
      {{ (currentUser$ | async) ? (currentUser$ | async).lastName : '??????' }}
    </span>
  </div>

And make sure you are not forgetting injecting router in your component.

I usually use one over the other based on the time complexities of the operations that I'd perform on that particular List.

|---------------------|---------------------|--------------------|------------|
|      Operation      |     ArrayList       |     LinkedList     |   Winner   |
|---------------------|---------------------|--------------------|------------|
|     get(index)      |       O(1)          |         O(n)       | ArrayList  |
|                     |                     |  n/4 steps in avg  |            |
|---------------------|---------------------|--------------------|------------|
|      add(E)         |       O(1)          |         O(1)       | LinkedList |
|                     |---------------------|--------------------|            |
|                     | O(n) in worst case  |                    |            |
|---------------------|---------------------|--------------------|------------|
|    add(index, E)    |       O(n)          |         O(n)       | LinkedList |
|                     |     n/2 steps       |      n/4 steps     |            |
|                     |---------------------|--------------------|            |
|                     |                     |  O(1) if index = 0 |            |
|---------------------|---------------------|--------------------|------------|
|  remove(index, E)   |       O(n)          |         O(n)       | LinkedList |
|                     |---------------------|--------------------|            |
|                     |     n/2 steps       |      n/4 steps     |            |
|---------------------|---------------------|--------------------|------------|
|  Iterator.remove()  |       O(n)          |         O(1)       | LinkedList |
|  ListIterator.add() |                     |                    |            |
|---------------------|---------------------|--------------------|------------|


|--------------------------------------|-----------------------------------|
|              ArrayList               |            LinkedList             |
|--------------------------------------|-----------------------------------|
|     Allows fast read access          |   Retrieving element takes O(n)   |
|--------------------------------------|-----------------------------------|
|   Adding an element require shifting | o(1) [but traversing takes time]  |
|       all the later elements         |                                   |
|--------------------------------------|-----------------------------------|
|   To add more elements than capacity |
|    new array need to be allocated    |
|--------------------------------------|

Rather than using direct tags, you can edit the css attribute for the color so that any tables you make will have the same color header text.

thead {
    color: #FFFFFF;
}

You could insert something like this:

personPlay = "B";

while (!personPlay.equals("R") && !personPlay.equals("P") && !personPlay.equals("S")) {

    //Get player's play from input-- note that this is 
    // stored as a string 
    System.out.println("Enter your play: "); 
    personPlay = scan.next();

    //Make player's play uppercase for ease of comparison 
    personPlay = personPlay.toUpperCase();

    if (!personPlay.equals("R") && !personPlay.equals("P") && !personPlay.equals("S"))
        System.out.println("Invalid move. Try again.");

}

To make the file public before uploading you can use the #withCannedAcl method of PutObjectRequest:

myAmazonS3Client.putObject(new PutObjectRequest('some-grails-bucket',  'somePath/someKey.jpg', new    File('/Users/ben/Desktop/photo.jpg')).withCannedAcl(CannedAccessControlList.PublicRead))

The return false is saying not to take the default action, which in the case of an <a href> is to follow the link. When you return false to the onclick, then the href will be ignored.

And another way:

<a href="javascript:history.back()">Go Back</a>

The percentage % sign followed by two hexadecimal numbers (UTF-8 character representation) typically denotes a string which has been encoded to be part of a URI. This ensures that characters that would otherwise have special meaning don't interfere. In your case %20 is immediately recognisable as a whitespace character - while not really having any meaning in a URI it is encoded in order to avoid breaking the string into multiple "parts".

Don't get me wrong, regex is the bomb! However any web technology worth caring about will already have tools available in it's library to handle standards like this for you. Why re-invent the wheel...?

var str = 'xPasswords%20do%20not%20match';
console.log( decodeURI(str) ); // "xPasswords do not match"

Javascript has both decodeURI and decodeURIComponent which differ slightly in respect to their encodeURI and encodeURIComponent counterparts - you should familiarise yourself with the documentation.

You are probably using an AMD/ATI graphics card. If so go to Catalyst Control Centre and switch Chrome to use only the Intel HD graphics (power saving). It is a problem with Chrome 18 and it is being fixed shortly (as advised by google six hours before this post)

It fixed after switched the graphics card in Catalyst, then restarted the computer.

The problem, as the Traceback says, comes from the line x[i+1] = x[i] + ( t[i+1] - t[i] ) * f( x[i], t[i] ). Let's replace it in its context:

• x is an array equal to [x0 * n], so its length is 1
• you're iterating from 0 to n-2 (n doesn't matter here), and i is the index. In the beginning, everything is ok (here there's no beginning apparently... :( ), but as soon as i + 1 >= len(x) <=> i >= 0, the element x[i+1] doesn't exist. Here, this element doesn't exist since the beginning of the for loop.

To solve this, you must replace x[i+1] = x[i] + ( t[i+1] - t[i] ) * f( x[i], t[i] ) by x.append(x[i] + ( t[i+1] - t[i] ) * f( x[i], t[i] )).

I will try to explain it shortly.

First, you may notice that now you should use ConstraintLayout as requested by google (see androix library).

In your android studio projet, you can provide screen-specific layouts by creating additional res/layout/ directories. One for each screen configuration that requires a different layout.

This means you have to use the directory qualifier in both cases :

• Android device support
• Android landscape or portrait mode

As a result, here is an exemple :

res/layout/main_activity.xml                # For handsets
res/layout-land/main_activity.xml           # For handsets in landscape
res/layout-sw600dp/main_activity.xml        # For 7” tablets
res/layout-sw600dp-land/main_activity.xml   # For 7” tablets in landscape

You can also use qualifier with res ressources files using dimens.xml.

res/values/dimens.xml                # For handsets
res/values-land/dimens.xml           # For handsets in landscape
res/values-sw600dp/dimens.xml        # For 7” tablets

res/values/dimens.xml

<resources>
    <dimen name="grid_view_item_height">70dp</dimen>
</resources>

res/values-land/dimens.xml

<resources>
    <dimen name="grid_view_item_height">150dp</dimen>
</resources>

your_item_grid_or_list_layout.xml

<androidx.constraintlayout.widget.ConstraintLayout
        android:id="@+id/constraintlayout"
        android:layout_width="match_parent"
        android:layout_height="wrap_content

    <ImageView
            android:id="@+id/image"
            android:layout_width="0dp"
            android:layout_height="@dimen/grid_view_item_height"
            android:layout_marginEnd="8dp"
            android:layout_marginStart="8dp"
            android:layout_marginTop="8dp"
            android:background="@drawable/border"
            android:src="@drawable/ic_menu_slideshow">

</androidx.constraintlayout.widget.ConstraintLayout>

Source : https://developer.android.com/training/multiscreen/screensizes

EXEC sp_helpuser

or

SELECT * FROM sysusers

Both of these select all the users of the current database (not the server).

The good way to get all the members from a group is to, make the DN of the group as the searchDN and pass the "member" as attribute to get in the search function. All of the members of the group can now be found by going through the attribute values returned by the search. The filter can be made generic like (objectclass=*).

If I understood your question, you want to merge branchB into branchA. To do so, first checkout branchA like below,

git checkout branchA

Then execute the below command to merge branchB into branchA:

git merge branchB

Here I am using iTextSharp dll for generating PDF file. I want to open PDF file instead of downloading it. So I am using below code which is working fine for me. Now pdf file is opening in browser ,now dowloading

        Document pdfDoc = new Document(PageSize.A4, 25, 10, 25, 10);
        PdfWriter pdfWriter = PdfWriter.GetInstance(pdfDoc, Response.OutputStream);
        pdfDoc.Open();
        Paragraph Text = new Paragraph("Hi , This is Test Content");
        pdfDoc.Add(Text);
        pdfWriter.CloseStream = false;
        pdfDoc.Close();
        Response.Buffer = true;
        Response.ContentType = "application/pdf";
        Response.Cache.SetCacheability(HttpCacheability.NoCache);
        Response.End();

If you want to download file, add below line, after this Response.ContentType = "application/pdf";

Response.AddHeader("content-disposition", "attachment;filename=Example.pdf");   

Color picker plugin for Interface Builder

There's a nice color picker from Panic which works well with IB: http://panic.com/~wade/picker/

Xcode plugin

This one gives you a GUI for choosing colors: http://www.youtube.com/watch?v=eblRfDQM0Go

Objective-C

UIColor *color = [UIColor colorWithRed:(160/255.0) green:(97/255.0) blue:(5/255.0) alpha:1.0];

Swift

let color = UIColor(red: 160/255, green: 97/255, blue: 5/255, alpha: 1.0)

Pods and libraries

There's a nice pod named MPColorTools: https://github.com/marzapower/MPColorTools

If you're just looking to re-do your view, I had the exact same issue. In the onResume function try putting this:

mView = new AndroidPinballView(getApplication());

This was also in my onCreate(), so putting this in the onResume worked for me :)

Uri myUri = Uri.parse("http://www.google.com");

Here's the doc http://developer.android.com/reference/android/net/Uri.html#parse%28java.lang.String%29

content doesn't support HTML, only text. You should probably use javascript, jQuery or something like that.

Another problem with your code is " inside a " block. You should mix ' and " (class='headingDetail').

If content did support HTML you could end up in an infinite loop where content is added inside content.

You should take a look at Batarang for AngularJS debugging

As for your issue:

Your scope variable is not directly attached to the modal correctly. Below is the adjusted code. You need to specify when the modal shows using ng-show

<!-- Confirmation Dialog -->
<div class="modal" modal="showModal" ng-show="showModal">
  <div class="modal-dialog">
    <div class="modal-content">
      <div class="modal-header">
        <button type="button" class="close" data-dismiss="modal" aria-hidden="true">×</button>
        <h4 class="modal-title">Delete confirmation</h4>
      </div>
      <div class="modal-body">
        <p>Are you sure?</p>
      </div>
      <div class="modal-footer">
        <button type="button" class="btn btn-default" data-dismiss="modal" ng-click="cancel()">No</button>
        <button type="button" class="btn btn-primary" ng-click="ok()">Yes</button>
      </div>
    </div>
  </div>
</div>
<!-- End of Confirmation Dialog -->

Installing requirements.txt file inside virtual env with Python 3:

I had the same issue. I was trying to install the requirements.txt file inside a virtual environment. I found the solution.

Initially, I created my virtualenv in this way:

virtualenv -p python3 myenv

Activate the environment using:

source myenv/bin/activate

Now I installed the requirements.txt file using:

pip3 install -r requirements.txt

Installation was successful and I was able to import the modules.

You could try the problems at RosettaCode, many of which lack Java solutions at the moment. The problems are of many different difficulties, but each has a solution already in another language which should help with the algorithmic side.

Go to a Packages/User, create (or edit) a .sublime-settings file named after the Syntax where you want to add the extensions, Ini.sublime-settings in your case, then write there something like this:

{
    "extensions":["cfg"]
}

And then restart Sublime Text

I had this noted from somewhere:

adding text-transform to input to remove it

input.button {
    text-indent:-9999px;
    text-transform:capitalize;
}

@John-Skeet gave me the clue to fix my own issue around this. As a younger programmer this small issue is easy to miss and hard to diagnose. So Im sharing it in the hopes it will help someone.

My issue was that I wanted to parse the following string contraining a time stamp from a JSON I have no influence over and put it in more useful variables. But I kept getting errors.

So given the following (pay attention to the string parameter inside ofPattern();

String str = "20190927T182730.000Z"

LocalDateTime fin;
fin = LocalDateTime.parse( str, DateTimeFormatter.ofPattern("yyyyMMdd'T'HHmmss.SSSZ") );

Error:

Exception in thread "main" java.time.format.DateTimeParseException: Text 
'20190927T182730.000Z' could not be parsed at index 19

The problem? The Z at the end of the Pattern needs to be wrapped in 'Z' just like the 'T' is. Change "yyyyMMdd'T'HHmmss.SSSZ" to "yyyyMMdd'T'HHmmss.SSS'Z'" and it works.

Removing the Z from the pattern alltogether also led to errors.

Frankly, I'd expect a Java class to have anticipated this.

You're missing *s in the last two terms of your expression, so R is interpreting (e.g.) 0.207 (log(DIAM93))^2 as an attempt to call a function named 0.207 ...

For example:

> 1 + 2*(3)
[1] 7
> 1 + 2 (3)

Error: attempt to apply non-function

Your (unreproducible) expression should read:

censusdata_20$AGB93 = WD * exp(-1.239 + 1.980 * log (DIAM93) + 
                              0.207* (log(DIAM93))^2  -
                              0.0281*(log(DIAM93))^3)

Mathematica is the only computer system I know of that allows juxtaposition to be used for multiplication ...

In my case, I was passsing all models 'Users' to column and it wasn't mapped correctly, so I just passed 'Users.Name' and it fixed it.

var data = db.ApplicationTranceLogs 
             .Include(q=>q.Users)
             .Include(q => q.LookupItems) 
             .Select(q => new { Id = q.Id, FormatDate = q.Date.ToString("yyyy/MM/dd"), ***Users = q.Users,*** ProcessType = q.ProcessType, CoreProcessId = q.CoreProcessId, Data = q.Data }) 
             .ToList();

var data = db.ApplicationTranceLogs 
             .Include(q=>q.Users).Include(q => q.LookupItems) 
             .Select(q => new { Id = q.Id, FormatDate = q.Date.ToString("yyyy/MM/dd"), ***Users = q.Users.Name***, ProcessType = q.ProcessType, CoreProcessId = q.CoreProcessId, Data = q.Data }) 
             .ToList();