Since unpaidMembers
is a dictionary it always returns two values when called with .items()
- (key, value). You may want to keep your data as a list of tuples [(name, email, lastname), (name, email, lastname)..]
.
Looking at this official google link: Youtube Live encoder settings, bitrates and resolutions they have this table:
240p 360p 480p 720p 1080p
Resolution 426 x 240 640 x 360 854x480 1280x720 1920x1080
Video Bitrates
Maximum 700 Kbps 1000 Kbps 2000 Kbps 4000 Kbps 6000 Kbps
Recommended 400 Kbps 750 Kbps 1000 Kbps 2500 Kbps 4500 Kbps
Minimum 300 Kbps 400 Kbps 500 Kbps 1500 Kbps 3000 Kbps
It would appear as though this is the case, although the numbers dont sync up to the google table above:
// the bitrates, video width and file names for this clip
bitrates: [
{ url: "bbb-800.mp4", width: 480, bitrate: 800 }, //360p video
{ url: "bbb-1200.mp4", width: 720, bitrate: 1200 }, //480p video
{ url: "bbb-1600.mp4", width: 1080, bitrate: 1600 } //720p video
],
For those like @sha1 wondering why the OP's code doesn't work -
OP's logic for deleting player at server side is in the handler for DelPlayer
event,
and the code that emits this event (DelPlayer
) is in inside disconnected
event callback of client.
The server side code that emits this disconnected
event is inside the disconnect
event callback which is fired when the socket loses connection. Since the socket already lost connection, disconnected
event doesn't reach the client.
Accepted solution executes the logic on disconnect
event at server side, which is fired when the socket disconnects, hence works.
You have to add the following dependency to your build:
<dependency>
<groupId>org.openrdf.sesame</groupId>
<artifactId>sesame-rio-api</artifactId>
<version>2.7.2</version>
</dependency>
Furthermore i would suggest to take a deep look into the documentation about how to use the lib.
There's an easy way to do that. Very easy. Since I noticed that
$scope.yourModel = [];
removes all $scope.yourModel array list you can do like this
function deleteAnObjectByKey(objects, key) {
var clonedObjects = Object.assign({}, objects);
for (var x in clonedObjects)
if (clonedObjects.hasOwnProperty(x))
if (clonedObjects[x].id == key)
delete clonedObjects[x];
$scope.yourModel = clonedObjects;
}
The $scope.yourModel will be updated with the clonedObjects.
Hope that helps.
Try this function, it's similar to your code but it's a dynamic range.
def unique(a):
k=0
while k < len(a):
if a[k] in a[k+1:]:
a.pop(k)
else:
k=k+1
return a
Pattern are always preferable for restriction, try oninput
and min
occur 1 for inputting only numbers from 1 onwards
<input type="text" min="1" oninput="this.value=this.value.replace(/[^0-9]/g,'');"
value=${var} >
2018 edit: I think this answer has some interesting info, but for any practical applications you should use Joe's answer instead.
A simple way to create a unique ID in JavaScript is to use the Date object:
var uniqid = Date.now();
That gives you the total milliseconds elapsed since January 1st 1970, which is a unique value every time you call that.
The problem with that value now is that you cannot use it as an element's ID, since in HTML, IDs need to start with an alphabetical character. There is also the problem that two users doing an action at the exact same time might result in the same ID. We could lessen the probability of that, and fix our alphabetical character problem, by appending a random letter before the numerical part of the ID.
var randLetter = String.fromCharCode(65 + Math.floor(Math.random() * 26));
var uniqid = randLetter + Date.now();
This still has a chance, however slim, of colliding though. Your best bet for a unique id is to keep a running count, increment it every time, and do all that in a single place, ie, on the server.
Your sample array has 3 levels. Because the first level has only [0]
, you can hardcode your access into it and avoid an extra function/construct call.
array_walk_recursive() is handy and versatile, but for this task may be overkill and certainly a bit more convoluted in terms of readability.
array_walk_recursive($array, function($leafvalue)use(&$flat){$flat[] = $leafvalue;});
var_export($flat);
If this was my code, I'd be using array_column() because it is direct and speaks literally about the action being performed.
var_export(array_column($array[0], 'plan'));
Of course a couple of `foreach() loops will perform very efficiently because language constructs generally perform more efficiently than function calls.
foreach ($array[0] as $plans) {
foreach ($plans as $value) {
$flat[] = $value;
}
}
var_export($flat);
Finally, as a funky alternative (which I can't imagine actually putting to use unless I was writing code for someone whom I didn't care for) I'll offer an array_merge_recursive() call with a splat operator (...
).
var_export(array_merge_recursive(...$array[0])['plan']);
Your original plan sounds fine to me. You'll probably find more browser quirks dealing with dynamically managing the <source>
elements, as indicated here by the W3 spec note:
Dynamically modifying a source element and its attribute when the element is already inserted in a video or audio element will have no effect. To change what is playing, just use the src attribute on the media element directly, possibly making use of the canPlayType() method to pick from amongst available resources. Generally, manipulating source elements manually after the document has been parsed is an unncessarily[sic] complicated approach.
http://dev.w3.org/html5/spec/Overview.html#the-source-element
(I know this is old but I wanted to post this for people like me who stumble upon it in the future) I personally just use this python code to decode base64 strings:
print open("FILE-WITH-STRING", "rb").read().decode("base64")
So you can run it in a bash script like this:
python -c 'print open("FILE-WITH-STRING", "rb").read().decode("base64")' > outputfile
file -i outputfile
twneale has also pointed out an even simpler solution: base64 -d
So you can use it like this:
cat "FILE WITH STRING" | base64 -d > OUTPUTFILE
#Or You Can Do This
echo "STRING" | base64 -d > OUTPUTFILE
That will save the decoded string to outputfile
and then attempt to identify file-type using either the file
tool or you can try TrID. The following command will decode the string into a file and then use TrID to automatically identify the file's type and add the extension.
echo "STRING" | base64 -d > OUTPUTFILE; trid -ce OUTPUTFILE
This works in Swift <3.0:
myTextField.attributedPlaceholder =
NSAttributedString(string: "placeholder text", attributes: [NSForegroundColorAttributeName : UIColor.redColor()])
Tested in iOS 8.2 and iOS 8.3 beta 4.
Swift 3:
myTextfield.attributedPlaceholder =
NSAttributedString(string: "placeholder text", attributes: [NSForegroundColorAttributeName : UIColor.red])
Swift 4:
myTextfield.attributedPlaceholder =
NSAttributedString(string: "placeholder text", attributes: [NSAttributedStringKey.foregroundColor: UIColor.red])
Swift 4.2:
myTextfield.attributedPlaceholder =
NSAttributedString(string: "placeholder text", attributes: [NSAttributedString.Key.foregroundColor: UIColor.red])
this modified code should work
p = ggplot(mydataf, aes(x = foo)) +
geom_bar(aes(y = (..count..)/sum(..count..))) +
scale_y_continuous(formatter = 'percent')
if your data has NAs and you dont want them to be included in the plot, pass na.omit(mydataf) as the argument to ggplot.
hope this helps.
A thread safe SystemClock
using ThreadLocal<T>
works great for me.
ThreadLocal<T>
is available in the .Net Framework v4.0 and higher.
/// <summary>
/// Provides access to system time while allowing it to be set to a fixed <see cref="DateTime"/> value.
/// </summary>
/// <remarks>
/// This class is thread safe.
/// </remarks>
public static class SystemClock
{
private static readonly ThreadLocal<Func<DateTime>> _getTime =
new ThreadLocal<Func<DateTime>>(() => () => DateTime.Now);
/// <inheritdoc cref="DateTime.Today"/>
public static DateTime Today
{
get { return _getTime.Value().Date; }
}
/// <inheritdoc cref="DateTime.Now"/>
public static DateTime Now
{
get { return _getTime.Value(); }
}
/// <inheritdoc cref="DateTime.UtcNow"/>
public static DateTime UtcNow
{
get { return _getTime.Value().ToUniversalTime(); }
}
/// <summary>
/// Sets a fixed (deterministic) time for the current thread to return by <see cref="SystemClock"/>.
/// </summary>
public static void Set(DateTime time)
{
if (time.Kind != DateTimeKind.Local)
time = time.ToLocalTime();
_getTime.Value = () => time;
}
/// <summary>
/// Resets <see cref="SystemClock"/> to return the current <see cref="DateTime.Now"/>.
/// </summary>
public static void Reset()
{
_getTime.Value = () => DateTime.Now;
}
}
Usage example:
[TestMethod]
public void Today()
{
SystemClock.Set(new DateTime(2015, 4, 3));
DateTime expectedDay = new DateTime(2015, 4, 2);
DateTime yesterday = SystemClock.Today.AddDays(-1D);
Assert.AreEqual(expectedDay, yesterday);
SystemClock.Reset();
}
For Android 6.0 at least, the ARM Translation thing is apparently unnecessary.
Just grab an x86 + Android 6.0 package (nano is fine) from OpenGApps and install by dragging-and-dropping and telling it to flash.
It seems the ARM translation thing was previously required, before the x86 package was available. You might still need the ARM translation if you want to install ARM-only apps though.
Talking about static variables, this is a little bit like closure variant:
var once = function() {
if(once.done) return;
console.log('Doing this once!');
once.done = true;
};
once(); once();
You could then reset a function if you wish:
once.done = false;
value="0" will set defualt value for @Html.TextBoxfor
its case sensitive "v" should be capital
Below is working example:
@Html.TextBoxFor(m => m.Nights,
new { @min = "1", @max = "10", @type = "number", @id = "Nights", @name = "Nights", Value = "1" })
I know this is an old thread, but there is a nice library to do this:
Example from the docs:
public void MyTest {
@Rule
public final SystemOutRule systemOutRule = new SystemOutRule().enableLog();
@Test
public void overrideProperty() {
System.out.print("hello world");
assertEquals("hello world", systemOutRule.getLog());
}
}
It will also allow you to trap System.exit(-1)
and other things that a command line tool would need to be tested for.
For me, I just had to type "yes" at the prompt which asks "Are you sure you want to continue connecting (yes/no)?" rather than just pressing Enter.
I came up with this function, which basically behaves similarly to one in the answer by Alex:
-(NSString*)trimLastSpace:(NSString*)str{
int i = str.length - 1;
for (; i >= 0 && [str characterAtIndex:i] == ' '; i--);
return [str substringToIndex:i + 1];
}
whitespaceCharacterSet
besides space itself includes also tab character, which in my case could not appear. So i guess a plain comparison could suffice.
Assuming fairly simple usage (no escaping of the delimiter, for example), you can use grep:
$ echo "1:2:3:4:5" | grep -oE "[^:]+$"
5
Breakdown - find all the characters not the delimiter ([^:]) at the end of the line ($). -o only prints the matching part.
Alternate solution. I prefer this for the brevity and code simplicity.
(function () {
alert("I am here");
})();
This is an anonymous function, where the name is not specified. What happens here is that, the function is defined and executed together. Add this to the beginning or end of the body, depending on if it is to be executed before loading the page or soon after all the HTML elements are loaded.
You can use Pandas:
import pandas as pd
pd.Series(your_array).to_json(orient='values')
#parent_div_1, #parent_div_2, #parent_div_3 {
width: 100px;
height: 100px;
border: 1px solid red;
margin-right: 10px;
float: left;
}
.child_div_1 {
float: left;
margin-right: 5px;
}
Check working example at http://jsfiddle.net/c6242/1/
The Integer.toString(size)
call converts into the char representation of your integer, i.e. the char '5'
. The ASCII representation of that character is the value 65.
You need to parse the string back to an integer value first, e.g. by using Integer.parseInt
, to get back the original int value.
As a bottom line, for a signed/unsigned conversion, it is best to leave String
out of the picture and use bit manipulation as @JB suggests.
The document.write method is very limited. You can only use it before the page has finished loading. You can't use it to update the contents of a loaded page.
What you probably want is innerHTML.
grep command for only matching and perl
grep -o -P 'th.*? ' filename
Select multiple lines by clicking first line then holding shift and clicking last line. Then press:
CTRL+SHIFT+L
or on MAC: CMD+SHIFT+L (as per comments)
Alternatively you can select lines and go to SELECTION MENU >> SPLIT INTO LINES.
Now you can edit multiple lines, move cursors etc. for all selected lines.
Using the request module solved the issue.
// Include the request library for Node.js
var request = require('request');
// Basic Authentication credentials
var username = "vinod";
var password = "12345";
var authenticationHeader = "Basic " + new Buffer(username + ":" + password).toString("base64");
request(
{
url : "https://133-70-97-54-43.sample.com/feedSample/Query_Status_View/Query_Status/Output1?STATUS=Joined%20school",
headers : { "Authorization" : authenticationHeader }
},
function (error, response, body) {
console.log(body); } );
At the time when this question was asked there wasn't another function in Pandas to test equality, but it has been added a while ago: pandas.equals
You use it like this:
df1.equals(df2)
Some differenes to ==
are:
dtype
to be considered equal, see this stackoverflow questionfor 2 decimal places assuming that you want to keep trailing zeros
sprintf(5.5, fmt = '%#.2f')
which gives
[1] "5.50"
As @mpag mentions below, it seems R can sometimes give unexpected values with this and the round method e.g. sprintf(5.5550, fmt='%#.2f') gives 5.55, not 5.56
The problem is you either haven't closed your if
or you need an elseif
:
create procedure checando(
in nombrecillo varchar(30),
in contrilla varchar(30),
out resultado int)
begin
if exists (select * from compas where nombre = nombrecillo and contrasenia = contrilla) then
set resultado = 0;
elseif exists (select * from compas where nombre = nombrecillo) then
set resultado = -1;
else
set resultado = -2;
end if;
end;
when we call ASCII as 7 bit code, the left most bit is used as sign bit so with 7 bits we can write up to 127. that means from -126 to 127 because Max imam value of ASCII is 0 to 255. this can be only satisfied with the argument of 7 bit if last bit is considered as sign bit
an additional note:
if you have already added a remote ($git remote add origin ... ) and need to change that particular remote then do a remote remove first ($ git remote rm origin), before re-adding the new and improved repo URL (where "origin" was the name for the remote repo).
so to use the original example :
$ git remote add origin https://github.com/WEMP/project-slideshow.git
$ git remote rm origin
$ git remote add origin https://[email protected]/WEMP/project-slideshow.git
You can break the $.each()
loop at a particular iteration by making the callback function return false.
Returning non-false is the same as a continue
statement in a for loop; it will skip immediately to the next iteration.
Simply call list
on the generator.
lst = list(gen)
lst
Be aware that this affects the generator which will not return any further items.
You also cannot directly call list
in IPython, as it conflicts with a command for listing lines of code.
Tested on this file:
def gen():
yield 1
yield 2
yield 3
yield 4
yield 5
import ipdb
ipdb.set_trace()
g1 = gen()
text = "aha" + "bebe"
mylst = range(10, 20)
which when run:
$ python code.py
> /home/javl/sandbox/so/debug/code.py(10)<module>()
9
---> 10 g1 = gen()
11
ipdb> n
> /home/javl/sandbox/so/debug/code.py(12)<module>()
11
---> 12 text = "aha" + "bebe"
13
ipdb> lst = list(g1)
ipdb> lst
[1, 2, 3, 4, 5]
ipdb> q
Exiting Debugger.
There are debugger commands p
and pp
that will print
and prettyprint
any expression following them.
So you could use it as follows:
$ python code.py
> /home/javl/sandbox/so/debug/code.py(10)<module>()
9
---> 10 g1 = gen()
11
ipdb> n
> /home/javl/sandbox/so/debug/code.py(12)<module>()
11
---> 12 text = "aha" + "bebe"
13
ipdb> p list(g1)
[1, 2, 3, 4, 5]
ipdb> c
There is also an exec
command, called by prefixing your expression with !
, which forces debugger to take your expression as Python one.
ipdb> !list(g1)
[]
For more details see help p
, help pp
and help exec
when in debugger.
ipdb> help exec
(!) statement
Execute the (one-line) statement in the context of
the current stack frame.
The exclamation point can be omitted unless the first word
of the statement resembles a debugger command.
To assign to a global variable you must always prefix the
command with a 'global' command, e.g.:
(Pdb) global list_options; list_options = ['-l']
This function creates a temporary form, then send data using jQuery :
function postToIframe(data,url,target){
$('body').append('<form action="'+url+'" method="post" target="'+target+'" id="postToIframe"></form>');
$.each(data,function(n,v){
$('#postToIframe').append('<input type="hidden" name="'+n+'" value="'+v+'" />');
});
$('#postToIframe').submit().remove();
}
target is the 'name' attr of the target iFrame, and data is a JS object :
data={last_name:'Smith',first_name:'John'}
As seen on reddit:
$address = urlencode('1600 Pennsylvania Avenue, Washington, DC');
$json = json_decode(file_get_contents("http://where.yahooapis.com/geocode?q=$address&flags=J"));
print_r($json);
As th function is not using $this
at all, you can add a static
keyword just after public and then call
Functions::filter($_GET['params']);
Avoiding the creation of an object just for one method call
For proper error handling:
#!/bin/bash
set -Ee
trap "echo error" EXIT
test -e ${FILENAME} || exit
while read -r line
do
echo ${line}
done < ${FILENAME}
Assuming your dataframe is mydf:
mydf$task <- factor(mydf$task, levels = c("up", "down", "left", "right", "front", "back"))
Is there an easy way to view all methods which contain this comment? Some sort of menu option?
Yes, choose one of the following:
Go to Window ? Show View ? Tasks (Not TaskList). The new view will show up where the "Console" and "Problems" tabs are by default.
As mentioned elsewhere, you can see them next to the scroll bar as little blue rectangles if you have the source file in question open.
If you just want the // TODO Auto-generated method stub
messages (rather than all // TODO
messages) you should use the search function (Ctrl-F for ones in this file Search ? Java Search ? Search string for the ability to specify this workspace, that file, this project, etc.)
The loop in your code is only an over-simplified example, right?
It would be better to create the PreparedStatement
only once, and re-use it over and over again in the loop.
In situations where that is not possible (because it complicated the program flow too much), it is still beneficial to use a PreparedStatement
, even if you use it only once, because the server-side of the work (parsing the SQL and caching the execution plan), will still be reduced.
To address the situation that you want to re-use the Java-side PreparedStatement
, some JDBC drivers (such as Oracle) have a caching feature: If you create a PreparedStatement
for the same SQL on the same connection, it will give you the same (cached) instance.
About multi-threading: I do not think JDBC connections can be shared across multiple threads (i.e. used concurrently by multiple threads) anyway. Every thread should get his own connection from the pool, use it, and return it to the pool again.
rem This is the command line version
cscript "C:\Users\guest\Desktop\123\MyScript.vbs"
OR
rem This is the windowed version
wscript "C:\Users\guest\Desktop\123\MyScript.vbs"
You can also add the option //e:vbscript
to make sure the scripting engine will recognize your script as a vbscript.
Windows/DOS batch files doesn't require escaping \
like *nix.
You can still use "C:\Users\guest\Desktop\123\MyScript.vbs"
, but this requires the user has *.vbs
associated to wscript
.
I had to do: c:\Users\xxxx>c:/python27/scripts/pip install openpyxl
I had to save the openpyxl files in the scripts folder.
You can try with the following way,
<parent>
<groupId></groupId>
<artifactId></artifactId>
<version></version>
</parent>
So that the parent jar will be fetching from the repository.
Per @EthanB suggestion and @karim making a back filled rectangle, I just created a category for the UIButton to achieve this.
Just drop in the Category code: https://github.com/zmonteca/UIButton-PLColor
Usage:
[button setBackgroundColor:uiTextColor forState:UIControlStateDisabled];
Optional forStates to use:
UIControlStateNormal
UIControlStateHighlighted
UIControlStateDisabled
UIControlStateSelected
Suspended. The session is waiting for an event, such as I/O, to complete.
Indeed. The thing is that the 2008 R2 version is very tricky. The JTDs driver seems to work on some cases. In a certain server, the jTDS worked fine for an 2008 R2 instance. In another server, though, I had to use Microsoft's JBDC driver sqljdbc4.jar. But then, it would only work after setting the JRE environment to 1.6(or higher).
I used 1.5 for the other server, so I waisted a lot of time on this.
Tricky issue.
in your code, just after 'do while' statement, add this line..
`Wscript.sleep 10000`
This will let your script sleep for 10 secs and let your system take rest. Else your processor will be running this script million times a second and this will definitely load your processor.
To kill it, just goto taskmanager and kill wscript.exe or if it is not found, you will find cscript.exe, kill it pressing delete button. These would be present in process tab of your taskmanager.
Once you add that line in code, I dont think you need to kill this process. It will not load your CPU.
Have a great day.
It's a little ugly (due to the scaling up), but it works on most newer browsers:
input[type=checkbox]_x000D_
{_x000D_
/* Double-sized Checkboxes */_x000D_
-ms-transform: scale(2); /* IE */_x000D_
-moz-transform: scale(2); /* FF */_x000D_
-webkit-transform: scale(2); /* Safari and Chrome */_x000D_
-o-transform: scale(2); /* Opera */_x000D_
transform: scale(2);_x000D_
padding: 10px;_x000D_
}_x000D_
_x000D_
/* Might want to wrap a span around your checkbox text */_x000D_
.checkboxtext_x000D_
{_x000D_
/* Checkbox text */_x000D_
font-size: 110%;_x000D_
display: inline;_x000D_
}
_x000D_
<input type="checkbox" name="optiona" id="opta" checked />_x000D_
<span class="checkboxtext">_x000D_
Option A_x000D_
</span>_x000D_
<input type="checkbox" name="optionb" id="optb" />_x000D_
<span class="checkboxtext">_x000D_
Option B_x000D_
</span>_x000D_
<input type="checkbox" name="optionc" id="optc" />_x000D_
<span class="checkboxtext">_x000D_
Option C_x000D_
</span>
_x000D_
Try this:
package my_default;
import java.io.File;
import java.io.FileInputStream;
import java.io.FileOutputStream;
import java.util.Iterator;
import org.apache.poi.ss.usermodel.Cell;
import org.apache.poi.ss.usermodel.Row;
import org.apache.poi.xssf.usermodel.XSSFCell;
import org.apache.poi.xssf.usermodel.XSSFRow;
import org.apache.poi.xssf.usermodel.XSSFSheet;
import org.apache.poi.xssf.usermodel.XSSFWorkbook;
public class Test {
public static void main(String[] args) {
try {
// Create Workbook instance holding reference to .xlsx file
XSSFWorkbook workbook = new XSSFWorkbook();
// Get first/desired sheet from the workbook
XSSFSheet sheet = createSheet(workbook, "Sheet 1", false);
// XSSFSheet sheet = workbook.getSheetAt(1);//Don't use this line
// because you get Sheet index (1) is out of range (no sheets)
//Write some information in the cells or do what you want
XSSFRow row1 = sheet.createRow(0);
XSSFCell r1c2 = row1.createCell(0);
r1c2.setCellValue("NAME");
XSSFCell r1c3 = row1.createCell(1);
r1c3.setCellValue("AGE");
//Save excel to HDD Drive
File pathToFile = new File("D:\\test.xlsx");
if (!pathToFile.exists()) {
pathToFile.createNewFile();
}
FileOutputStream fos = new FileOutputStream(pathToFile);
workbook.write(fos);
fos.close();
System.out.println("Done");
} catch (Exception e) {
e.printStackTrace();
}
}
private static XSSFSheet createSheet(XSSFWorkbook wb, String prefix, boolean isHidden) {
XSSFSheet sheet = null;
int count = 0;
for (int i = 0; i < wb.getNumberOfSheets(); i++) {
String sName = wb.getSheetName(i);
if (sName.startsWith(prefix))
count++;
}
if (count > 0) {
sheet = wb.createSheet(prefix + count);
} else
sheet = wb.createSheet(prefix);
if (isHidden)
wb.setSheetHidden(wb.getNumberOfSheets() - 1, XSSFWorkbook.SHEET_STATE_VERY_HIDDEN);
return sheet;
}
}
catch
is called except
in Python. other than that it's fine for such simple cases. There's the AttributeError
that can be used to check if an object has an attribute.
I have used a very simple solution. I have included a HTML element, that calls the method, in my Vue Component that I select, using Vanilla JS, and I trigger click!
In the Vue Component, I have included something like the following:
<span data-id="btnReload" @click="fetchTaskList()"><i class="fa fa-refresh"></i></span>
That I use using Vanilla JS:
const btnReload = document.querySelector('[data-id="btnReload"]');
btnReload.click();
For those using bootstrap 4 beta you can add max-width on your navbar link to have control on the size of your logo with img-fluid class on the image element.
<a class="navbar-brand" href="#" style="max-width: 30%;">
<img src="images/logo.png" class="img-fluid">
</a>
It can be a way to use functions to make other functions.
In javascript:
let add = function(x){
return function(y){
return x + y
};
};
Would allow us to call it like so:
let addTen = add(10);
When this runs the 10
is passed in as x
;
let add = function(10){
return function(y){
return 10 + y
};
};
which means we are returned this function:
function(y) { return 10 + y };
So when you call
addTen();
you are really calling:
function(y) { return 10 + y };
So if you do this:
addTen(4)
it's the same as:
function(4) { return 10 + 4} // 14
So our addTen()
always adds ten to whatever we pass in. We can make similar functions in the same way:
let addTwo = add(2) // addTwo(); will add two to whatever you pass in
let addSeventy = add(70) // ... and so on...
Now the obvious follow up question is why on earth would you ever want to do that? It turns what was an eager operation x + y
into one that can be stepped through lazily, meaning we can do at least two things
1. cache expensive operations
2. achieve abstractions in the functional paradigm.
Imagine our curried function looked like this:
let doTheHardStuff = function(x) {
let z = doSomethingComputationallyExpensive(x)
return function (y){
z + y
}
}
We could call this function once, then pass around the result to be used in lots of places, meaning we only do the computationally expensive stuff once:
let finishTheJob = doTheHardStuff(10)
finishTheJob(20)
finishTheJob(30)
We can get abstractions in a similar way.
You want the "popen" function. Here's an example of running the command "ls /etc" and outputing to the console.
#include <stdio.h>
#include <stdlib.h>
int main( int argc, char *argv[] )
{
FILE *fp;
char path[1035];
/* Open the command for reading. */
fp = popen("/bin/ls /etc/", "r");
if (fp == NULL) {
printf("Failed to run command\n" );
exit(1);
}
/* Read the output a line at a time - output it. */
while (fgets(path, sizeof(path), fp) != NULL) {
printf("%s", path);
}
/* close */
pclose(fp);
return 0;
}
I am able to get it working with the below command.
root@gitnew:# docker exec -it --user $(username) $(containername) /bin/bash
Looks like Facebook disabled passing parameters to the sharer.
We have changed the behavior of the sharer plugin to be consistent with other plugins and features on our platform.
The sharer will no longer accept custom parameters and facebook will pull the information that is being displayed in the preview the same way that it would appear on facebook as a post from the url OG meta tags.
Here's the URL to the post: https://developers.facebook.com/x/bugs/357750474364812/
You may run:
git log <SHA1>..HEAD --ancestry-path --merges
From comment of last commit in the output you may find original branch name
Example:
c---e---g--- feature
/ \
-a---b---d---f---h---j--- master
git log e..master --ancestry-path --merges
commit h
Merge: g f
Author: Eugen Konkov <>
Date: Sat Oct 1 00:54:18 2016 +0300
Merge branch 'feature' into master
Firebase: https://firebase.google.com/docs/cloud-messaging/
GCM(Deprecated): http://developer.android.com/google/gcm/index.html
I don't have much knowledge about C2DM. Use GCM, it's very easy to implement and configure.
Let me introduce my own approach called Yappi. It belongs to Runtime proxy|derived class generators, adding new functionality to an existing object or type, like Caste Project's Dynamic Proxy.
It allows to implement INotifyPropertyChanged once in base class, and then declare derived classes in following style, still supporting INotifyPropertyChanged for new properties:
public class Animal:Concept
{
protected Animal(){}
public virtual string Name { get; set; }
public virtual int Age { get; set; }
}
Complexity of derived class or proxy construction can be hidden behind the following line:
var animal = Concept.Create<Animal>.New();
And all INotifyPropertyChanged implementation work can be done like this:
public class Concept:INotifyPropertyChanged
{
//Hide constructor
protected Concept(){}
public static class Create<TConcept> where TConcept:Concept
{
//Construct derived Type calling PropertyProxy.ConstructType
public static readonly Type Type = PropertyProxy.ConstructType<TConcept, Implementation<TConcept>>(new Type[0], true);
//Create constructing delegate calling Constructor.Compile
public static Func<TConcept> New = Constructor.Compile<Func<TConcept>>(Type);
}
public event PropertyChangedEventHandler PropertyChanged;
protected void OnPropertyChanged(PropertyChangedEventArgs eventArgs)
{
var caller = PropertyChanged;
if(caller!=null)
{
caller(this, eventArgs);
}
}
//define implementation
public class Implementation<TConcept> : DefaultImplementation<TConcept> where TConcept:Concept
{
public override Func<TBaseType, TResult> OverrideGetter<TBaseType, TDeclaringType, TConstructedType, TResult>(PropertyInfo property)
{
return PropertyImplementation<TBaseType, TDeclaringType>.GetGetter<TResult>(property.Name);
}
/// <summary>
/// Overriding property setter implementation.
/// </summary>
/// <typeparam name="TBaseType">Base type for implementation. TBaseType must be TConcept, and inherits all its constraints. Also TBaseType is TDeclaringType.</typeparam>
/// <typeparam name="TDeclaringType">Type, declaring property.</typeparam>
/// <typeparam name="TConstructedType">Constructed type. TConstructedType is TDeclaringType and TBaseType.</typeparam>
/// <typeparam name="TResult">Type of property.</typeparam>
/// <param name="property">PropertyInfo of property.</param>
/// <returns>Delegate, corresponding to property setter implementation.</returns>
public override Action<TBaseType, TResult> OverrideSetter<TBaseType, TDeclaringType, TConstructedType, TResult>(PropertyInfo property)
{
//This code called once for each declared property on derived type's initialization.
//EventArgs instance is shared between all events for each concrete property.
var eventArgs = new PropertyChangedEventArgs(property.Name);
//get delegates for base calls.
Action<TBaseType, TResult> setter = PropertyImplementation<TBaseType, TDeclaringType>.GetSetter<TResult>(property.Name);
Func<TBaseType, TResult> getter = PropertyImplementation<TBaseType, TDeclaringType>.GetGetter<TResult>(property.Name);
var comparer = EqualityComparer<TResult>.Default;
return (pthis, value) =>
{//This code executes each time property setter is called.
if (comparer.Equals(value, getter(pthis))) return;
//base. call
setter(pthis, value);
//Directly accessing Concept's protected method.
pthis.OnPropertyChanged(eventArgs);
};
}
}
}
It is fully safe for refactoring, uses no reflection after type construction and fast enough.
There are two steps to fix this.
First edit phpMyAdmin/libraries/DatabaseInterface.class.php
Change:
if (PMA_MYSQL_INT_VERSION > 50503) {
$default_charset = 'utf8mb4';
$default_collation = 'utf8mb4_general_ci';
} else {
$default_charset = 'utf8';
$default_collation = 'utf8_general_ci';
}
To:
//if (PMA_MYSQL_INT_VERSION > 50503) {
// $default_charset = 'utf8mb4';
// $default_collation = 'utf8mb4_general_ci';
//} else {
$default_charset = 'utf8';
$default_collation = 'utf8_general_ci';
//}
Then delete this cookie from your browser "pma_collation_connection".
Or delete all Cookies.
Then restart your phpMyAdmin.
(It would be nice if phpMyAdmin allowed you to set the charset and collation per server in the config.inc.php)
In the end after trying many of these complicated solutions as I only needed to save/restore a single value in my Fragment (the content of an EditText), and although it might not be the most elegant solution, creating a SharedPreference and storing my state there worked for me
further to what @JohnTESlade has answered. Google's python style guide has some pretty neat recommendations,
Names to Avoid
\__double_leading_and_trailing_underscore__ names
(reserved by Python)Naming Convention
CapWords
for class names, but lower_with_under.py
for module names. Although there are many existing modules named CapWords.py
, this is now discouraged because it's confusing when the module happens to be named after a class. ("wait -- did I write import StringIO
or from StringIO import StringIO
?")Yes, below is a link of docs.Oracle where you can find complete list of escape characters in Java.
Escape characters are always preceded with "\" and used to perform some specific task like go to next line etc.
For more Details on Escape Character Refer following link:
https://docs.oracle.com/javase/tutorial/java/data/characters.html
Use this it's tested on python 2.7 and works fine it returns ping time in milliseconds if success and return False on fail.
import platform,subproccess,re
def Ping(hostname,timeout):
if platform.system() == "Windows":
command="ping "+hostname+" -n 1 -w "+str(timeout*1000)
else:
command="ping -i "+str(timeout)+" -c 1 " + hostname
proccess = subprocess.Popen(command, stdout=subprocess.PIPE)
matches=re.match('.*time=([0-9]+)ms.*', proccess.stdout.read(),re.DOTALL)
if matches:
return matches.group(1)
else:
return False
You could use something like (Linux):
svnadmin dump repositorypath | gzip > backupname.svn.gz
Since Windows does not support GZip it is just:
svnadmin dump repositorypath > backupname.svn
If you need permissions, you cannot use 'pip' with 'sudo'. You can do a trick, so that you can use 'sudo' and install package. Just place 'sudo python -m ...' in front of your pip command.
sudo python -m pip install --user -r package_name
If you can't find what process is running elasticsearch on windows machine you can try running in console:
netstat -a -n -o
Look for port elasticsearch is running, default is 9200
. Last column is PID for process that is using that port. You can shutdown it with simple command in console
taskkill /PID here_goes_PID /F
Mac OSX only
An easier way to get going (assuming you already have homebrew installed, which you should, if not, go do that first and let homebrew make your life better) is to just run the following command:
brew install chromedriver
That should put the chromedriver in your path and you should be all set.
Rename the solution's corresponding .SUO file. The SUO file contains the TFS status (online/offline), amongst a host of other goodies.
Do this only if the "right-click on the solution name right at the top of the Solution Explorer and select the Go Online option" fails (because e.g. you installed VS2015 preview).
Edit /etc/paths
. Then close the terminal and reopen it.
$ sudo vi /etc/paths
Note: each entry is seperated by line breaks.
/usr/local/bin
/usr/bin
/bin
/usr/sbin
/sbin
You most likely will want to use the FileInputStream class:
int character;
StringBuffer buffer = new StringBuffer("");
FileInputStream inputStream = new FileInputStream(new File("/home/jessy/file.txt"));
while( (character = inputStream.read()) != -1)
buffer.append((char) character);
inputStream.close();
System.out.println(buffer);
You will also want to catch some of the exceptions thrown by the read() method and FileInputStream constructor, but those are implementation details specific to your project.
The advantage of passing an owner handle is that the FolderBrowserDialog will not be modal to that window. This prevents the user from interacting with your main application window while the dialog is active.
jQuery .height
will return you the height of the element. It doesn't need CSS definition as it determines the computed height.
You can use .height()
, .innerHeight()
or outerHeight()
based on what you need.
.height()
- returns the height of element excludes padding, border and margin.
.innerHeight()
- returns the height of element includes padding but excludes border and margin.
.outerHeight()
- returns the height of the div including border but excludes margin.
.outerHeight(true)
- returns the height of the div including margin.
Check below code snippet for live demo. :)
$(function() {_x000D_
var $heightTest = $('#heightTest');_x000D_
$heightTest.html('Div style set as "height: 180px; padding: 10px; margin: 10px; border: 2px solid blue;"')_x000D_
.append('<p>Height (.height() returns) : ' + $heightTest.height() + ' [Just Height]</p>')_x000D_
.append('<p>Inner Height (.innerHeight() returns): ' + $heightTest.innerHeight() + ' [Height + Padding (without border)]</p>')_x000D_
.append('<p>Outer Height (.outerHeight() returns): ' + $heightTest.outerHeight() + ' [Height + Padding + Border]</p>')_x000D_
.append('<p>Outer Height (.outerHeight(true) returns): ' + $heightTest.outerHeight(true) + ' [Height + Padding + Border + Margin]</p>')_x000D_
});
_x000D_
div { font-size: 0.9em; }
_x000D_
<script src="https://ajax.googleapis.com/ajax/libs/jquery/1.11.1/jquery.min.js"></script>_x000D_
<div id="heightTest" style="height: 150px; padding: 10px; margin: 10px; border: 2px solid blue; overflow: hidden; ">_x000D_
</div>
_x000D_
In Centos 7 default filesystem is xfs.
xfs file system support only extend not reduce. So if you want to resize the filesystem use xfs_growfs rather than resize2fs.
xfs_growfs /dev/root_vg/root
Note: For ext4 filesystem use
resize2fs /dev/root_vg/root
Here you go.
DataTable defaultDataTable = defaultDataSet.Tables[0];
var list = (from x in defaultDataTable.AsEnumerable()
where x.Field<string>("column1") == something
select x.Field<string>("column2")).ToList();
If you need the first column
var list = (from x in defaultDataTable.AsEnumerable()
where x.Field<string>(1) == something
select x.Field<string>(1)).ToList();
When you read in the year month day hour minutes with something like nextInt()
it leaves rest of the line in the parser/buffer (even if it is blank) so when you call nextLine()
you are reading the rest of this first line.
I suggest you to use scan.next()
instead of scan.nextLine()
.
yet another solution which will set a valid position for each visible modal on window.resize
event and on show.bs.modal
:
(function ($) {
"use strict";
function centerModal() {
$(this).css('display', 'block');
var $dialog = $(this).find(".modal-dialog"),
offset = ($(window).height() - $dialog.height()) / 2,
bottomMargin = parseInt($dialog.css('marginBottom'), 10);
// Make sure you don't hide the top part of the modal w/ a negative margin if it's longer than the screen height, and keep the margin equal to the bottom margin of the modal
if(offset < bottomMargin) offset = bottomMargin;
$dialog.css("margin-top", offset);
}
$(document).on('show.bs.modal', '.modal', centerModal);
$(window).on("resize", function () {
$('.modal:visible').each(centerModal);
});
})(jQuery);
This answer is easy to understand
Replace original file
FILENAME='app/Providers/AuthServiceProvider.php'
sed '/THEPATTERNYOUARELOOKINGFOR/Q' $FILENAME >>${FILENAME}_temp
cat << 'EOL' >> ${FILENAME}_temp
HERE YOU COPY AND
PASTE MULTIPLE
LINES, ALSO YOU CAN
//WRITE COMMENTS
AND NEW LINES
AND SPECIAL CHARS LIKE $THISONE
EOL
grep -A 9999 'THEPATTERNYOUARELOOKINGFOR' $FILENAME >>${FILENAME}_temp
mv ${FILENAME}_temp $FILENAME
cat << EOL >> ${FILENAME}_temp
this variable will expand: $variable1
EOL
If you press CTRL + I it will just format tabs/whitespaces in code and pressing CTRL + SHIFT + F format all code that is format tabs/whitespaces and also divide code lines in a way that it is visible without horizontal scroll.
Adding more to Andreas' answer. I had the same problem with ES6 code, but I did not want to mutate the imports. That looked hacky. So I did this:
import myModule from '../myModule';
import dependency from '../dependency';
jest.mock('../dependency');
describe('myModule', () => {
it('calls the dependency with double the input', () => {
myModule(2);
});
});
And added file dependency.js in the " __ mocks __" folder parallel to file dependency.js. This worked for me. Also, this gave me the option to return suitable data from the mock implementation. Make sure you give the correct path to the module you want to mock.
You should create table2 first.
insert into table2(field1,field2,...) select field1,field2,.... from table1 where condition;
use the following rule for validating radio button group selection
myRadioGroupName : {required :true}
myRadioGroupName is the value you have given to name attribute
I'd recommend using Promise.all as mentioned above, but if you really feel like avoiding that approach, you can do a for or any other loop:
const arr = [1,2,3,4,5];
let resultingArr = [];
for (let i in arr){
await callAsynchronousOperation(i);
resultingArr.push(i + 1)
}
If you want to install Python 2.7 on Oracle Linux, you can proceed as follows:
Enable the Software Collection in /etc/yum.repos.d/public-yum-ol6.repo.
vim /etc/yum.repos.d/public-yum-ol6.repo
[public_ol6_software_collections]
name=Software Collection Library release 1.2 packages for Oracle Linux 6
(x86_64)
baseurl=[http://yum.oracle.com/repo/OracleLinux/OL6/SoftwareCollections12/x86_64/][1]
gpgkey=file:[///etc/pki/rpm-gpg/RPM-GPG-KEY-oracle][2]
gpgcheck=1
enabled=1 <==============change from 0 to 1
After making this change to the yum repository you can simply run the yum command to install the Python:
yum install gcc libffi libffi-devel python27 python27-python-devel openssl-devel python27-MySQL-python
edit bash_profile with follow variables:
vim ~/.bash_profile
PATH=$PATH:$HOME/bin:/opt/rh/python27/root/usr/bin export PATH
LD_LIBRARY_PATH=/opt/rh/python27/root/usr/lib64 export LD_LIBRARY_PATH
PKG_CONFIG_PATH=/opt/rh/python27/root/usr/lib64/pkgconfig export PKG_CONFIG_PATH
Now you can use python2.7 and pip for install Python modules:
/opt/rh/python27/root/usr/bin/pip install pynacl
/opt/rh/python27/root/usr/bin/python2.7 --version
CREATE TABLE book (
id INT AUTO_INCREMENT primary key NOT NULL,
accepted_terms BIT(1) NOT NULL,
accepted_privacy BIT(1) NOT NULL
) ENGINE=InnoDB DEFAULT CHARSET=latin1
If you are using Spring container and you want to initialize non-nullable bean field, lateinit
is better suited.
@Autowired
lateinit var myBean: MyBean
This solution is for Litespeed Server (Apache as well)
Add the following code in .htaccess
RewriteRule .* - [E=noabort:1]
RewriteRule .* - [E=noconntimeout:1]
It's running every minute of the hour 22 I guess. Try the following to run it every first minute of the hour 22:
0 22 * * * ....
I've managed to successfully install wkhtmltopdf-amd64 on my shared hosting account without root access.
Here's what i did:
Downloaded the relevant static binary v0.10.0 from here: http://code.google.com/p/wkhtmltopdf/downloads/list
EDIT: The above has moved to here
via ssh on my shared host typed the following:
$ wget {relavant url to binary from link above}
$ tar -xvf {filename of above wget'd file}
you'll then have the binary on your host and will be able to run it regardless of if its in the /usr/bin/ folder or not. (or at least i was able to)
To test:
$ ./wkhtmltopdf-amd64 http://www.example.com example.pdf
./
just to be sure.Worked for me anyway
This is probably what you need:
$text = str_replace(' ', '_', substr($text, 0, 10));
It is worth mentioning that one can check the characters in the string against Unicode categories - numbers, uppercase, lowercase, currencies and more. Here are two examples checking for numbers in a string using Linq:
var containsNumbers = s.Any(Char.IsNumber);
var isNumber = s.All(Char.IsNumber);
For clarity, the syntax above is a shorter version of:
var containsNumbers = s.Any(c=>Char.IsNumber(c));
var isNumber = s.All(c=>Char.IsNumber(c));
Link to unicode categories on MSDN:
The logic in the "one-liner" works fine. From personal experience, what has helped me is to assign the statements to variables (in their "True" form) and then use logical operators for the result:
A = year % 4 == 0
B = year % 100 == 0
C = year % 400 == 0
I used '==' in the B statement instead of "!=" and applied 'not' logical operator in the calculation:
leap = A and (not B or C)
This comes in handy with a larger set of conditions, and to simplify the boolean operation where applicable before writing a whole bunch of if statements.
I"m guessing i'm getting this error because the string is trying to substring a Null value. But wouldn't the ".length() > 0" part eliminate that issue?
No, calling itemdescription.length() when itemdescription is null would not generate a StringIndexOutOfBoundsException, but rather a NullPointerException since you would essentially be trying to call a method on null.
As others have indicated, StringIndexOutOfBoundsException indicates that itemdescription is not at least 38 characters long. You probably want to handle both conditions (I assuming you want to truncate):
final String value;
if (itemdescription == null || itemdescription.length() <= 0) {
value = "_";
} else if (itemdescription.length() <= 38) {
value = itemdescription;
} else {
value = itemdescription.substring(0, 38);
}
pstmt2.setString(3, value);
Might be a good place for a utility function if you do that a lot...
Caution: This answer was written in 2010 and technology moves fast. For a more recent solution, see @ctrl-alt-dileep's answer below.
Depending on your needs, you may wish to try the jQuery touch plugin; you can try an example here. It works fine to drag on my iPhone, whereas jQuery UI Draggable doesn't.
Alternatively, you can try this plugin, though that might require you to actually write your own draggable function.
As a sidenote: Believe it or not, we're hearing increasing buzz about how touch devices such as the iPad and iPhone is causing problems both for websites using :hover/onmouseover functions and draggable content.
If you're interested in the underlying solution for this, it's to use three new JavaScript events; ontouchstart, ontouchmove and ontouchend. Apple actually has written an article about their use, which you can find here. A simplified example can be found here. These events are used in both of the plugins I linked to.
This occurs when you specify the different name for repository table name and database table name. Please check your table name with database and repository.
What was asked for was to set:
the 'default', not some other color profile, and
'for all vim sessions', not simply for the current user.
The default colorscheme, "for all vim sessions", is not set simply by adding a line to your ~/.vimrc
, as all of the other answers here say, nor is the default set without the word 'default' being there.
So all of the other answers here, so far, get both of these wrong. (lol, how did that happen?)
The correct answer is:
Add a line to your system vim setup file in /etc/vim/
that says
colorscheme default
or using the abbreviation
colo default
but not capitalized as
colo Default
(I suggest using the full, un-abbreviated term 'colorscheme', so that when you look at this years later you'll be able to more easily figure out what that darn thing does. I would also put a comment above it like "Use default colors for vim"
.)
To append that correctly, first look at your /etc/vim/vimrc
file.
At the bottom of mine, I see these lines which include /etc/vim/vimrc.local
:
" Source a global configuration file if available
if filereadable("/etc/vim/vimrc.local")
source /etc/vim/vimrc.local
endif
So you can append this line to either of these two files.
I think the best solution is to append your line to /etc/vim/vimrc.local
like this:
colorscheme default
You can easily do that in bash with this line:
$ echo -e "\"Use default colors for vim:\ncolorscheme default" \
| sudo tee -a /etc/vim/vimrc.local
#
# NOTE: This doesn't work:
#
# $ sudo echo 'colorscheme default' >> /etc/vim/vimrc.local
#
# It's the same general idea, and simpler, but because sudo doesn't
# know how to handle pipes, it fails with a `Permission denied` error.
Also check that you have permission to globally read this file:
sudo chmod 644 /etc/vim/vimrc.local
With $ tail /etc/vim/vimrc.local
you should now see these lines:
"Use default colors for vim:
colorscheme default
The last 9 elements can be read from left to right using numlist[-9:], or from right to left using numlist[:-10:-1], as you want.
>>> a=range(17)
>>> print a
[0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16]
>>> print a[-9:]
[8, 9, 10, 11, 12, 13, 14, 15, 16]
>>> print a[:-10:-1]
[16, 15, 14, 13, 12, 11, 10, 9, 8]
Versions of sed
that support the -i
option for editing a file in place write to a temporary file and then rename the file.
Alternatively, you can just use ed
. For example, to change all occurrences of foo
to bar
in the file file.txt
, you can do:
echo ',s/foo/bar/g; w' | tr \; '\012' | ed -s file.txt
Syntax is similar to sed
, but certainly not exactly the same.
Even if you don't have a -i
supporting sed
, you can easily write a script to do the work for you. Instead of sed -i 's/foo/bar/g' file
, you could do inline file sed 's/foo/bar/g'
. Such a script is trivial to write. For example:
#!/bin/sh
IN=$1
shift
trap 'rm -f "$tmp"' 0
tmp=$( mktemp )
<"$IN" "$@" >"$tmp" && cat "$tmp" > "$IN" # preserve hard links
should be adequate for most uses.
See it in Activity Lifecycle (at Android Developers).
Called when the activity is first created. This is where you should do all of your normal static set up: create views, bind data to lists, etc. This method also provides you with a Bundle containing the activity's previously frozen state, if there was one. Always followed by onStart().
Called after your activity has been stopped, prior to it being started again. Always followed by onStart()
Called when the activity is becoming visible to the user. Followed by onResume() if the activity comes to the foreground.
Called when the activity will start interacting with the user. At this point your activity is at the top of the activity stack, with user input going to it. Always followed by onPause().
Called as part of the activity lifecycle when an activity is going into the background, but has not (yet) been killed. The counterpart to onResume(). When activity B is launched in front of activity A, this callback will be invoked on A. B will not be created until A's onPause() returns, so be sure to not do anything lengthy here.
Called when you are no longer visible to the user. You will next receive either onRestart(), onDestroy(), or nothing, depending on later user activity. Note that this method may never be called, in low memory situations where the system does not have enough memory to keep your activity's process running after its onPause() method is called.
The final call you receive before your activity is destroyed. This can happen either because the activity is finishing (someone called finish() on it, or because the system is temporarily destroying this instance of the activity to save space. You can distinguish between> these two scenarios with the isFinishing() method.
When the Activity first time loads the events are called as below:
onCreate()
onStart()
onResume()
When you click on Phone button the Activity goes to the background and the below events are called:
onPause()
onStop()
Exit the phone dialer and the below events will be called:
onRestart()
onStart()
onResume()
When you click the back button OR try to finish() the activity the events are called as below:
onPause()
onStop()
onDestroy()
The Android OS uses a priority queue to assist in managing activities running on the device. Based on the state a particular Android activity is in, it will be assigned a certain priority within the OS. This priority system helps Android identify activities that are no longer in use, allowing the OS to reclaim memory and resources. The following diagram illustrates the states an activity can go through, during its lifetime:
These states can be broken into three main groups as follows:
Active or Running - Activities are considered active or running if they are in the foreground, also known as the top of the activity stack. This is considered the highest priority activity in the Android Activity stack, and as such will only be killed by the OS in extreme situations, such as if the activity tries to use more memory than is available on the device as this could cause the UI to become unresponsive.
Paused - When the device goes to sleep, or an activity is still visible but partially hidden by a new, non-full-sized or transparent activity, the activity is considered paused. Paused activities are still alive, that is, they maintain all state and member information, and remain attached to the window manager. This is considered to be the second highest priority activity in the Android Activity stack and, as such, will only be killed by the OS if killing this activity will satisfy the resource requirements needed to keep the Active/Running Activity stable and responsive.
Stopped - Activities that are completely obscured by another activity are considered stopped or in the background. Stopped activities still try to retain their state and member information for as long as possible, but stopped activities are considered to be the lowest priority of the three states and, as such, the OS will kill activities in this state first to satisfy the resource requirements of higher priority activities.
*Sample activity to understand the life cycle**
import android.app.Activity;
import android.os.Bundle;
import android.util.Log;
public class MainActivity extends Activity {
String tag = "LifeCycleEvents";
/** Called when the activity is first created. */
@Override
public void onCreate(Bundle savedInstanceState) {
super.onCreate(savedInstanceState);
setContentView(R.layout.main);
Log.d(tag, "In the onCreate() event");
}
public void onStart()
{
super.onStart();
Log.d(tag, "In the onStart() event");
}
public void onRestart()
{
super.onRestart();
Log.d(tag, "In the onRestart() event");
}
public void onResume()
{
super.onResume();
Log.d(tag, "In the onResume() event");
}
public void onPause()
{
super.onPause();
Log.d(tag, "In the onPause() event");
}
public void onStop()
{
super.onStop();
Log.d(tag, "In the onStop() event");
}
public void onDestroy()
{
super.onDestroy();
Log.d(tag, "In the onDestroy() event");
}
}
The principal is the Random Class constructed with the same seed will generate the same pattern of numbers every time.
Hint: The STRINGIZE
macro above is cool, but if you make a mistake and its argument isn't a macro - you had a typo in the name, or forgot to #include
the header file - then the compiler will happily put the purported macro name into the string with no error.
If you intend that the argument to STRINGIZE
is always a macro with a normal C value, then
#define STRINGIZE(A) ((A),STRINGIZE_NX(A))
will expand it once and check it for validity, discard that, and then expand it again into a string.
It took me a while to figure out why STRINGIZE(ENOENT)
was ending up as "ENOENT"
instead of "2"
... I hadn't included errno.h
.
It would be a security vulnerability if the client could request local file system files and then use JavaScript to figure out what's in them.
The only way around this is to build an extension in a browser. Firefox extensions and IE extensions can access local resources. Chrome is much more restrictive.
Well Curl could be a better option for json representation but in that case it would be difficult to understand the structure of json because its in command line. if you want to get your json on browser you simply remove all the XML Annotations like -
@XmlRootElement(name="person")
@XmlAccessorType(XmlAccessType.NONE)
@XmlAttribute
@XmlElement
from your model class and than run the same url, you have used for xml representation.
Make sure that you have jacson-databind dependency in your pom.xml
<dependency>
<groupId>com.fasterxml.jackson.core</groupId>
<artifactId>jackson-databind</artifactId>
<version>2.4.1</version>
</dependency>
The OP updated his question with several citations that he had found, namely in an article by Edward V. Berard titled, "Abstraction, Encapsulation, and Information Hiding". I am re-posting a slightly expanded and reformatted version of the OP's update, since it should be an answer in its own right.
(All citations are taken from the article mentioned above.)
Abstraction:
"One point of confusion regarding abstraction is its use as both process and an entity. Abstraction, as a process, denotes the extracting of the essential details about an item, or a group of items, while ignoring the inessential details. Abstraction, as an entity, denotes a model, a view, or some other focused representation for an actual item."
Information Hiding:
"Its interface or definition was chosen to reveal as little as possible about its inner workings." — [Parnas, 1972b]
"Abstraction can be […] used as a technique for identifying which information should be hidden."
"Confusion can occur when people fail to distinguish between the hiding of information, and a technique (e.g., abstraction) that is used to help identify which information is to be hidden."
Encapsulation:
"It […] refers to building a capsule, in the case a conceptual barrier, around some collection of things." — [Wirfs-Brock et al, 1990]
"As a process, encapsulation means the act of enclosing one or more items within a […] container. Encapsulation, as an entity, refers to a package or an enclosure that holds (contains, encloses) one or more items."
"If encapsulation was 'the same thing as information hiding,' then one might make the argument that 'everything that was encapsulated was also hidden.' This is obviously not true."
Conclusion:
"Abstraction, information hiding, and encapsulation are very different, but highly-related, concepts. One could argue that abstraction is a technique that help us identify which specific information should be visible, and which information should be hidden. Encapsulation is then the technique for packaging the information in such a way as to hide what should be hidden, and make visible what is intended to be visible."
If you find search and replace faster to use, you could use a regex replace like this:
Find (regex): (^|\G) {2}
(Instead of " {2}" <space>{2}
you can just write two spaces. Used it here for clarity.)
Replace with 4 spaces, or whatever you want, like \t
.
OR
makes sense (from readability point of view), when there are less values to be compared.
IN
is useful esp. when you have a dynamic source, with which you want values to be compared.
Another alternative is to use a JOIN
with a temporary table.
I don't think performance should be a problem, provided you have necessary indexes.
There are many ways to skip the first line. In addition to those said by Bakuriu, I would add:
with open(filename, 'r') as f:
next(f)
for line in f:
and:
with open(filename,'r') as f:
lines = f.readlines()[1:]
Honestly, with 8 objects max and 8 properties max per object, your best bet is to just traverse each object and make the comparisons directly. It'll be fast and it'll be easy.
If you're going to be using these types of comparisons often, then I agree with Jason about JSON serialization...but otherwise there's no need to slow down your app with a new library or JSON serialization code.
Just an observation I just made while building naive code on OSX with cmake:
cmake ... -DBUILD_SHARED_LIBS=OFF ...
creates .so files
while
cmake ... -DBUILD_SHARED_LIBS=ON ...
creates .dynlib files.
Perhaps this helps anyone.
Resolved this issue by using http(s)
when accessing the endpoint. The route I was accessing was not available over http
. So I would say verify the protocols for which the route is available.
I had to restart Android Studio for changing the sdk after installing a new one. Then Android Studio asked me for configuring my SDK and let me do it.
If you want them to be really equal (i.e. the same items and the same number of each item), I think that the simplest solution is to sort before comparing:
Enumerable.SequenceEqual(list1.OrderBy(t => t), list2.OrderBy(t => t))
Here is a solution that performs a bit better (about ten times faster), and only requires IEquatable
, not IComparable
:
public static bool ScrambledEquals<T>(IEnumerable<T> list1, IEnumerable<T> list2) {
var cnt = new Dictionary<T, int>();
foreach (T s in list1) {
if (cnt.ContainsKey(s)) {
cnt[s]++;
} else {
cnt.Add(s, 1);
}
}
foreach (T s in list2) {
if (cnt.ContainsKey(s)) {
cnt[s]--;
} else {
return false;
}
}
return cnt.Values.All(c => c == 0);
}
To handle any data type as key (for example nullable types as Frank Tzanabetis pointed out), you can make a version that takes a comparer for the dictionary:
public static bool ScrambledEquals<T>(IEnumerable<T> list1, IEnumerable<T> list2, IEqualityComparer<T> comparer) {
var cnt = new Dictionary<T, int>(comparer);
...
This worked for me
$("div").css({"left":"2000px"}).animate({"left":"0px"}, "slow");
They are pretty much the same thing. Thanks to the magic of C++, a struct can hold functions, use inheritance, created using "new" and so on just like a class
The only functional difference is that a class begins with private access rights, while a struct begins with public. This is the maintain backwards compatibility with C.
In practice, I've always used structs as data holders and classes as objects.
myString += Environment.NewLine;
myString = myString + Environment.NewLine;
simpler with linq:
public void KillProcessesAssociatedToFile(string file)
{
GetProcessesAssociatedToFile(file).ForEach(x =>
{
x.Kill();
x.WaitForExit(10000);
});
}
public List<Process> GetProcessesAssociatedToFile(string file)
{
return Process.GetProcesses()
.Where(x => !x.HasExited
&& x.Modules.Cast<ProcessModule>().ToList()
.Exists(y => y.FileName.ToLowerInvariant() == file.ToLowerInvariant())
).ToList();
}
Shortest example of code:
<p><span>Some text</span></p>
p {
position: relative;
pointer-events: none;
}
p::before {
content: "";
position: absolute;
pointer-events: auto;
}
p span {
display: contents;
pointer-events: auto;
}
const all_p = Array.from(document.querySelectorAll('p'));
for (let p of all_p) {
p.addEventListener("click", listener, false);
};
pointer-events
control detection of events, removing receiving events from target, but keep receiving from pseudo-elements make possible to click on ::before
and ::after
and you will always know what you are clicking on pseudo-element, however if you still need to click, you put all content in nested element (span
in example), but because we don't want to apply any additional styles, display: contents;
become very handy solution and it supported by most browsers. pointer-events: none;
as already mentioned in original post also widely supported.
The JavaScript part also used widely supported Array.from
and for...of
, however they are not necessary to use in code.
Sometimes the columns will have commas within themselves, such as:
"Some item", "Another Item", "Also, One more item"
In these cases, splitting on "," will break some columns. Maybe an easier way, but I just made my own method (as a bonus, handles spaces after commas and returns an IList):
private IList<string> GetColumns(string columns)
{
IList<string> list = new List<string>();
if (!string.IsNullOrWhiteSpace(columns))
{
if (columns[0] != '\"')
{
// treat as just one item
list.Add(columns);
}
else
{
bool gettingItemName = true;
bool justChanged = false;
string itemName = string.Empty;
for (int index = 1; index < columns.Length; index++)
{
justChanged = false;
if (subIndustries[index] == '\"')
{
gettingItemName = !gettingItemName;
justChanged = true;
}
if ((gettingItemName == false) &&
(justChanged == true))
{
list.Add(itemName);
itemName = string.Empty;
justChanged = false;
}
if ((gettingItemName == true) && (justChanged == false))
{
itemName += columns[index];
}
}
}
}
return list;
}
The typical solution to this is to write your own function to clone an object. If you are able to provide copy constructors and copy assignement operators, this may be as far as you need to go.
class Foo
{
public:
Foo();
Foo(const Foo& rhs) { /* copy construction from rhs*/ }
Foo& operator=(const Foo& rhs) {};
};
// ...
Foo orig;
Foo copy = orig; // clones orig if implemented correctly
Sometimes it is beneficial to provide an explicit clone()
method, especially for polymorphic classes.
class Interface
{
public:
virtual Interface* clone() const = 0;
};
class Foo : public Interface
{
public:
Interface* clone() const { return new Foo(*this); }
};
class Bar : public Interface
{
public:
Interface* clone() const { return new Bar(*this); }
};
Interface* my_foo = /* somehow construct either a Foo or a Bar */;
Interface* copy = my_foo->clone();
EDIT: Since Stack
has no member variables, there's nothing to do in the copy constructor or copy assignment operator to initialize Stack
's members from the so-called "right hand side" (rhs
). However, you still need to ensure that any base classes are given the opportunity to initialize their members.
You do this by calling the base class:
Stack(const Stack& rhs)
: List(rhs) // calls copy ctor of List class
{
}
Stack& operator=(const Stack& rhs)
{
List::operator=(rhs);
return * this;
};
Simple and crisp...:
private OnItemSelectedListener OnCatSpinnerCL = new AdapterView.OnItemSelectedListener() {
public void onItemSelected(AdapterView<?> parent, View view, int pos, long id) {
((TextView) parent.getChildAt(0)).setTextColor(Color.BLUE);
((TextView) parent.getChildAt(0)).setTextSize(5);
}
public void onNothingSelected(AdapterView<?> parent) {
}
};
Try below code
public enum SalaryHeadMasterEnum {
BASIC_PAY("basic pay"),
MEDICAL_ALLOWANCE("Medical Allowance");
private String name;
private SalaryHeadMasterEnum(String stringVal) {
name=stringVal;
}
public String toString(){
return name;
}
public static String getEnumByString(String code){
for(SalaryHeadMasterEnum e : SalaryHeadMasterEnum.values()){
if(e.name.equals(code)) return e.name();
}
return null;
}
}
Now you can use below code to retrieve the Enum by Value
SalaryHeadMasterEnum.getEnumByString("Basic Pay")
Use Below code to get ENUM as String
SalaryHeadMasterEnum.BASIC_PAY.name()
Use below code to get string Value for enum
SalaryHeadMasterEnum.BASIC_PAY.toString()
I would add an useful side note and a general suggestion to minimize JPG and PNG.
First of all, ImageMagick reads (or better "guess"...) the input jpeg compression level and so if you don't add -quality NN
at all, the output should use the same level as input. Sometimes could be an important feature. Otherwise the default level is -quality 92
(see www.imagemagick.org)
The suggestion is about a really awesome free tool ImageOptim, also for batch process.
You can get smaller jpgs (and pngs as well, especially after the use of the free ImageAlpha [not batch process] or the free Pngyu if you need batch process).
Not only, these tools are for Mac and Win and as Command Line (I suggest installing using Brew and then searching in Brew formulas).
Step 1
Add the file name(s) to your .gitignore
file.
Step 2
git filter-branch --force --index-filter \
'git rm -r --cached --ignore-unmatch YOURFILE' \
--prune-empty --tag-name-filter cat -- --all
Step 3
git push -f origin branch
A big thank you to @mu.
The operator you are looking for is Tilde (~), like Alessandro said, and here it is in the documentation:
~: Converts all operands into strings and concatenates them. {{ "Hello " ~ name ~ "!" }} would return (assuming name is 'John') Hello John!. – http://twig.sensiolabs.org/doc/templates.html#other-operators
And here is an example somewhere else in the docs:
{% set greeting = 'Hello' %}
{% set name = 'Fabien' %}
{{ greeting ~ name|lower }} {# Hello fabien #}
{# use parenthesis to change precedence #}
{{ (greeting ~ name)|lower }} {# hello fabien #}
For some people which might still see this question, there is another way on how to append another array element(s) in C. You can refer to this blog which shows a C code on how to append another element in your array
.
But you can also use memcpy()
function, to append element(s) of another array. You can use memcpy()
like this:
#include <stdio.h>
#include <string.h>
int main(void)
{
int first_array[10] = {45, 2, 48, 3, 6};
int scnd_array[] = {8, 14, 69, 23, 5};
// 5 is the number of the elements which are going to be appended
memcpy(a + 5, b, 5 * sizeof(int));
// loop through and print all the array
for (i = 0; i < 10; i++) {
printf("%d\n", a[i]);
}
}
Use this cmd to display the packages in your device (for windows users)
adb shell pm list packages
then you can delete completely the package with the following cmd
adb uninstall com.example.myapp
There is no such thing as the "empty character" ''
.
If you need a space character, that can be represented as a space: c[i] = ' '
or as its ASCII octal equivalent: c[i] = '\040'
. If you need a NUL character that's c[i] = '\0'
.
Apple lifted the restrictions on non-Objective C/C/C++ apps -- you just can't load code that isn't in the app bundle.
MonoTouch lets you use .NET languages -- C# is directly supported, but if you have Windows, you can make assemblies in any .NET language and use it.
There are rumors that Apple is going to support other languages directly -- I keep hearing ruby, but they are just rumors.
I think Lua is being used for game logic on a lot of apps.
EDIT (in 2018): Generally you can use any language that you can get to compile for iOS or even install language interpreters. The main thing you cannot do is load code from the Internet that wasn't in the app bundle.
People do this all of the time anyway (see React Native apps loading JavaScript from servers), but, technically, it's not allowed. The main thing that will get you attention from Apple if you make some kind of App Store that loads whole App-like things.
EDIT (in 2020): from @Pylot in comments: I know this is a long time ago, but now at least technically you can load code that isn’t embedded in the app, as you can write with JavaScript using the webview. Not staying your answer is wrong or anything, I definitely agree with you. but I was looking for something and found this post on the way. Figured if anyone sees this it might help them out.
You can use the pluck
method:
Word_relation::where('word_one', $word_id)->pluck('word_two')->toArray();
For more info on what methods are available for using with collection, you can you can check out the Laravel Documentation.
After many answers that did not work, I finally found a solution when Anonymous access is Disabled on the IIS server. Our server is using Windows authentication, not Kerberos. This is thanks to this blog posting.
No changes were made to web.config.
On the server side, the .SVC file in the ISAPI folder uses MultipleBaseAddressBasicHttpBindingServiceHostFactory
The class attributes of the service are:
[BasicHttpBindingServiceMetadataExchangeEndpointAttribute]
[AspNetCompatibilityRequirements(RequirementsMode = AspNetCompatibilityRequirementsMode.Required)]
public class InvoiceServices : IInvoiceServices
{
...
}
On the client side, the key that made it work was the http binding security attributes:
EndpointAddress endpoint =
new EndpointAddress(new Uri("http://SharePointserver/_vti_bin/InvoiceServices.svc"));
BasicHttpBinding httpBinding = new BasicHttpBinding();
httpBinding.Security.Mode = BasicHttpSecurityMode.TransportCredentialOnly;
httpBinding.Security.Transport.ClientCredentialType = HttpClientCredentialType.Ntlm;
InvoiceServicesClient myClient = new InvoiceServicesClient(httpBinding, endpoint);
myClient.ClientCredentials.Windows.AllowedImpersonationLevel = System.Security.Principal.TokenImpersonationLevel.Impersonation;
(call service)
I hope this works for you!
I use this function in all my js projects
You call it: hideAndResetModals("#IdModalDialog")
You define if:
function hideAndResetModals(modalID)
{
$(modalID).modal('hide');
clearValidation(modalID); //You implement it if you need it. If not, you can remote this line
$(modalID).on('hidden.bs.modal', function ()
{
$(modalID).find('form').trigger('reset');
});
}
In onMapReady() Method
change the zoomLevel to any desired value.
float zoomLevel = (float) 18.0;
mMap.moveCamera(CameraUpdateFactory.newLatLngZoom(latLng, zoomLevel));
Looks like you are missing some Maven repos. Ask for your friend's .m2/settings.xml
, and you'll probably want to update the POM to include the repositories there.
--edit: after some quick googling, try adding this to your POM:
<repository>
<id>com.springsource.repository.bundles.release</id>
<name>SpringSource Enterprise Bundle Repository - SpringSource Bundle Releases</name>
<url>http://repository.springsource.com/maven/bundles/release</url>
</repository>
<repository>
<id>com.springsource.repository.bundles.external</id>
<name>SpringSource Enterprise Bundle Repository - External Bundle Releases</name>
<url>http://repository.springsource.com/maven/bundles/external</url>
</repository>
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
namespace ConvertToAnyBase
{
class Program
{
static void Main(string[] args)
{
var baseNumber = int.Parse(Console.ReadLine());
var number = int.Parse(Console.ReadLine());
string conversion = "";
while(number!=0)
{
conversion += Convert.ToString(number % baseNumber);
number = number / baseNumber;
}
var conversion2 = conversion.ToArray().Reverse();
Console.WriteLine(string.Join("", conversion2));
}
}
}
(at least) for Django 1.8:
If you use
if settings.DEBUG:
urlpatterns.append(url(r'^media/(?P<path>.*)$', 'django.views.static.serve', {'document_root': settings.MEDIA_ROOT}))
as described above, make sure that no "catch all" url pattern, directing to a default view, comes before that in urlpatterns = []. As .append will put the added scheme to the end of the list, it will of course only be tested if no previous url pattern matches. You can avoid that by using something like this where the "catch all" url pattern is added at the very end, independent from the if statement:
if settings.DEBUG:
urlpatterns.append(url(r'^media/(?P<path>.*)$', 'django.views.static.serve', {'document_root': settings.MEDIA_ROOT}))
urlpatterns.append(url(r'$', 'views.home', name='home')),
How are you running the file? Is it from the command line or from an IDE? The directory that your executable is in is not necessarily your working directory.
Try using the full path name in the fopen
and see if that fixes it. If so, then the problem is as described.
For example:
file = fopen("c:\\MyDirectory\\TestFile1.txt", "r");
file = fopen("/full/path/to/TestFile1.txt", "r");
Or open up a command window and navigate to the directory where your executable is, then run it manually.
As an aside, you can insert a simple (for Windows or Linux/UNIX/BSD/etc respectively):
system ("cd")
system("pwd")
before the fopen
to show which directory you're actually in.
This is an old thread but just in case anyone comes across it like I did. pi.FileName needs to be set to the file name (and possibly full path to file ) of the executable you want to use to open your file. The below code works for me to open a video file with VLC.
var path = files[currentIndex].fileName;
var pi = new ProcessStartInfo(path)
{
Arguments = Path.GetFileName(path),
UseShellExecute = true,
WorkingDirectory = Path.GetDirectoryName(path),
FileName = "C:\\Program Files (x86)\\VideoLAN\\VLC\\vlc.exe",
Verb = "OPEN"
};
Process.Start(pi)
Tigran's answer works but will use windows' default application to open your file, so using ProcessStartInfo may be useful if you want to open the file with an application that is not the default.
if list item view contains button or checkbox or imagebutton, the onitemclicklistener and onitemlongclicklistener not working due to it has own onclick listener.
set focusable as false
holder.button.setFocusable(false);
If you have the PATH in your .bashrc file and are still getting
conda: command not found
Your terminal might not be looking for the bash file.
Type
bash
in the terminal to insure you are in bash and then try:
conda --version
Edited on 1/2/15
C# 6 :
With C# 6 you can initialize auto-properties directly (finally!), there are now other answers in the thread that describe that.
C# 5 and below:
Though the intended use of the attribute is not to actually set the values of the properties, you can use reflection to always set them anyway...
public class DefaultValuesTest
{
public DefaultValuesTest()
{
foreach (PropertyDescriptor property in TypeDescriptor.GetProperties(this))
{
DefaultValueAttribute myAttribute = (DefaultValueAttribute)property.Attributes[typeof(DefaultValueAttribute)];
if (myAttribute != null)
{
property.SetValue(this, myAttribute.Value);
}
}
}
public void DoTest()
{
var db = DefaultValueBool;
var ds = DefaultValueString;
var di = DefaultValueInt;
}
[System.ComponentModel.DefaultValue(true)]
public bool DefaultValueBool { get; set; }
[System.ComponentModel.DefaultValue("Good")]
public string DefaultValueString { get; set; }
[System.ComponentModel.DefaultValue(27)]
public int DefaultValueInt { get; set; }
}
Underscore.js or Lodash
if (_.has(x, "y")) ...
:)
Your myCoolDiv
element isn't a child of the player container. It's a child of the div
you created as a wrapper for it (markerDiv
in the first part of the code). Which is why it fails, removeChild
only removes children, not descendants.
You'd want to remove that wrapper div, or not add it at all.
Here's the "not adding it at all" option:
var markerDiv = document.createElement("div");_x000D_
markerDiv.innerHTML = "<div id='MyCoolDiv' style='color: #2b0808'>123</div>";_x000D_
document.getElementById("playerContainer").appendChild(markerDiv.firstChild);_x000D_
// -------------------------------------------------------------^^^^^^^^^^^_x000D_
_x000D_
setTimeout(function(){ _x000D_
var myCoolDiv = document.getElementById("MyCoolDiv");_x000D_
document.getElementById("playerContainer").removeChild(myCoolDiv);_x000D_
}, 1500);
_x000D_
<div id="playerContainer"></div>
_x000D_
Or without using the wrapper (although it's quite handy for parsing that HTML):
var myCoolDiv = document.createElement("div");_x000D_
// Don't reall need this: myCoolDiv.id = "MyCoolDiv";_x000D_
myCoolDiv.style.color = "#2b0808";_x000D_
myCoolDiv.appendChild(_x000D_
document.createTextNode("123")_x000D_
);_x000D_
document.getElementById("playerContainer").appendChild(myCoolDiv);_x000D_
_x000D_
setTimeout(function(){ _x000D_
// No need for this, we already have it from the above:_x000D_
// var myCoolDiv = document.getElementById("MyCoolDiv");_x000D_
document.getElementById("playerContainer").removeChild(myCoolDiv);_x000D_
}, 1500);
_x000D_
<div id="playerContainer"></div>
_x000D_
You can remove all the dependencies by recursively uninstalling all of them and then delete the venv.
Edit including Isaac Turner commentary
source venv/bin/activate
pip freeze > requirements.txt
pip uninstall -r requirements.txt -y
deactivate
rm -r venv/
String taskLatLng = task.getTask_latlng().replaceAll( "\\(","").replaceAll("\\)","").replaceAll("lat/lng:", "").trim();
Many answers here. Here is my first consideration.
Without JavaScript, including the possibility Javascript is initially disabled by the user in his browser for security purposes, to be white listed by the user if the user trusts the site, DOM will not be usable because Javascript is off.
Programmatically, you are left with a backend server-side or frontend client-side consideration.
With the backend, you can use common denominator HTTP "User-Agent" request header and/or any possible proprietary HTTP request header issued by the browser to output browser specific HTML stuff.
With the client site, you may want to enforce Javascript to allow you to use DOM. If so, then you probably will want to first use the following in your HTML page:
<noscript>This site requires Javascript. Please turn on Javascript.</noscript>
While we are heading to a day with every web coder will be dependent on Javascript in some way (or not), today, to presume every user has javascript enabled would be design and product development QA mistake.
I've seen far too may sites who end up with a blank page or the site breaks down because it presumed every user has javascript enabled. No. For security purposes, they may have Javascript initially off and some browsers, like Chrome, will allow the user to white list the web site on a domain by domain basis. Edge is the only browser I am aware of where Microsoft made the decision to completely disable the user's ability to turn off Javascript. Edge doesn't offer a white listing concept hence it is one reason I don't personally use Edge.
Using the tag is a simple way to inform the user your site won't work without Javascript. Once the user turns it on and refreshes/reload the page, DOM is now available to use the techniques cited by the thread replies to detect chrome vs safari.
Ironically, I got here because I was updating by platform and google the same basic question; chrome vs sarafi. I didn't know Chrome creates a DOM object named "chrome" which is really all you need to detect "chrome" vs everything else.
var isChrome = typeof(chrome) === "object";
If true, you got Chrome, if false, you got some other browser.
Check to see if Safari create its own DOM object as well, if so, get the object name and do the same thing, for example:
var isSafari = (typeof(safari) === "object");
Hope these tips help.
This solution also removes values such as " "
:
const result = ['', null, 'foo', ' ', undefined, 'bar'].filter(el => {
return Boolean(el) && el.trim() !== '';
}).join(', ');
console.log(result); // => foo, bar
A hardware or software flag. In multi tasking systems , a semaphore is as variable with a value that indicates the status of a common resource.A process needing the resource checks the semaphore to determine the resources status and then decides how to proceed.
String localFormat = android.text.format.DateFormat.getBestDateTimePattern(Locale.getDefault(), "EEEE MMMM d");
return new SimpleDateFormat(localFormat, Locale.getDefault()).format(localMidnight);
will return a format based on device's language. Note that getBestDateTimePattern() returns "the best possible localized form of the given skeleton for the given locale"
if (CommonMethod.isNetworkAvailable(MainActivity.this)) {
if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.M) {
int permissionCheck = ContextCompat.checkSelfPermission(MainActivity.this,
android.Manifest.permission.CAMERA);
if (permissionCheck == PackageManager.PERMISSION_GRANTED) {
//showing dialog to select image
callFacebook();
Log.e("permission", "granted MarshMallow");
} else {
ActivityCompat.requestPermissions(MainActivity.this,
new String[]{android.Manifest.permission.READ_EXTERNAL_STORAGE,
android.Manifest.permission.WRITE_EXTERNAL_STORAGE, android.Manifest.permission.CAMERA}, 1);
}
} else {
Log.e("permission", "Not Required Less than MarshMallow Version");
callFacebook();
}
} else {
CommonMethod.showAlert("Internet Connectivity Failure", MainActivity.this);
}
Flotr2 and Envision are options. Flotr2 has a real time example on the doco page I linked. Envision is a bit tougher to get started with, so try Flotr2.
Another "trick" for generating the column list is simply to drag the "Columns" node from Object Explorer onto a query window.
This turns out to be a very interesting question. With over a hundred properties being set, you'd think that you'd be allowed to type .clickable { onclick : "alert('hi!');" ; } in your CSS, and it'd work. It's intuitive, it makes so much sense. This would be amazingly useful in monkey-patching dynamically-generated massive UIs.
The problem:
The CSS police, in their infinite wisdom, have drawn a Chinese wall between presentation and behavior. Any HTML properly labeled on-whatever is intentionally not supported by CSS. (Full Properties Table)
The best way around this is to use jQuery, which sets up an interpreted engine in the background to execute what you were trying to do with the CSS anyway. See this page: Add Javascript Onclick To .css File.
Good luck.
A good place to start is the JavaDocs. They have this covered:
Thrown when an application attempts to use null in a case where an object is required. These include:
- Calling the instance method of a null object.
- Accessing or modifying the field of a null object.
- Taking the length of null as if it were an array.
- Accessing or modifying the slots of null as if it were an array.
- Throwing null as if it were a Throwable value.
Applications should throw instances of this class to indicate other illegal uses of the null object.
It is also the case that if you attempt to use a null reference with synchronized
, that will also throw this exception, per the JLS:
SynchronizedStatement: synchronized ( Expression ) Block
- Otherwise, if the value of the Expression is null, a
NullPointerException
is thrown.
So you have a NullPointerException
. How do you fix it? Let's take a simple example which throws a NullPointerException
:
public class Printer {
private String name;
public void setName(String name) {
this.name = name;
}
public void print() {
printString(name);
}
private void printString(String s) {
System.out.println(s + " (" + s.length() + ")");
}
public static void main(String[] args) {
Printer printer = new Printer();
printer.print();
}
}
Identify the null values
The first step is identifying exactly which values are causing the exception. For this, we need to do some debugging. It's important to learn to read a stacktrace. This will show you where the exception was thrown:
Exception in thread "main" java.lang.NullPointerException
at Printer.printString(Printer.java:13)
at Printer.print(Printer.java:9)
at Printer.main(Printer.java:19)
Here, we see that the exception is thrown on line 13 (in the printString
method). Look at the line and check which values are null by
adding logging statements or using a debugger. We find out that s
is null, and calling the length
method on it throws the exception. We can see that the program stops throwing the exception when s.length()
is removed from the method.
Trace where these values come from
Next check where this value comes from. By following the callers of the method, we see that s
is passed in with printString(name)
in the print()
method, and this.name
is null.
Trace where these values should be set
Where is this.name
set? In the setName(String)
method. With some more debugging, we can see that this method isn't called at all. If the method was called, make sure to check the order that these methods are called, and the set method isn't called after the print method.
This is enough to give us a solution: add a call to printer.setName()
before calling printer.print()
.
The variable can have a default value (and setName
can prevent it being set to null):
private String name = "";
Either the print
or printString
method can check for null, for example:
printString((name == null) ? "" : name);
Or you can design the class so that name
always has a non-null value:
public class Printer {
private final String name;
public Printer(String name) {
this.name = Objects.requireNonNull(name);
}
public void print() {
printString(name);
}
private void printString(String s) {
System.out.println(s + " (" + s.length() + ")");
}
public static void main(String[] args) {
Printer printer = new Printer("123");
printer.print();
}
}
See also:
If you tried to debug the problem and still don't have a solution, you can post a question for more help, but make sure to include what you've tried so far. At a minimum, include the stacktrace in the question, and mark the important line numbers in the code. Also, try simplifying the code first (see SSCCE).
Add this to your web.config
. You need to tell IIS what PUT
PATCH
DELETE
and OPTIONS
means. And which IHttpHandler
to invoke.
<configuation>
<system.webServer>
<handlers>
<remove name="ExtensionlessUrlHandler-ISAPI-4.0_32bit" />
<remove name="ExtensionlessUrlHandler-ISAPI-4.0_64bit" />
<remove name="ExtensionlessUrlHandler-Integrated-4.0" />
<add name="ExtensionlessUrlHandler-ISAPI-4.0_32bit" path="*." verb="GET,HEAD,POST,DEBUG,PUT,DELETE,PATCH,OPTIONS" modules="IsapiModule" scriptProcessor="%windir%\Microsoft.NET\Framework\v4.0.30319\aspnet_isapi.dll" preCondition="classicMode,runtimeVersionv4.0,bitness32" responseBufferLimit="0" />
<add name="ExtensionlessUrlHandler-ISAPI-4.0_64bit" path="*." verb="GET,HEAD,POST,DEBUG,PUT,DELETE,PATCH,OPTIONS" modules="IsapiModule" scriptProcessor="%windir%\Microsoft.NET\Framework64\v4.0.30319\aspnet_isapi.dll" preCondition="classicMode,runtimeVersionv4.0,bitness64" responseBufferLimit="0" />
<add name="ExtensionlessUrlHandler-Integrated-4.0" path="*." verb="GET,HEAD,POST,DEBUG,PUT,DELETE,PATCH,OPTIONS" type="System.Web.Handlers.TransferRequestHandler" preCondition="integratedMode,runtimeVersionv4.0" />
</handlers>
</system.webServer>
</configuration>
Also check you don't have WebDAV enabled.
*args
and **kwargs
: allow you to pass a variable number of arguments to a function.
*args
: is used to send a non-keyworded variable length argument list to the function:
def args(normal_arg, *argv):
print("normal argument:", normal_arg)
for arg in argv:
print("Argument in list of arguments from *argv:", arg)
args('animals', 'fish', 'duck', 'bird')
Will produce:
normal argument: animals
Argument in list of arguments from *argv: fish
Argument in list of arguments from *argv: duck
Argument in list of arguments from *argv: bird
**kwargs*
**kwargs
allows you to pass keyworded variable length of arguments to a function. You should use **kwargs
if you want to handle named arguments in a function.
def who(**kwargs):
if kwargs is not None:
for key, value in kwargs.items():
print("Your %s is %s." % (key, value))
who(name="Nikola", last_name="Tesla", birthday="7.10.1856", birthplace="Croatia")
Will produce:
Your name is Nikola.
Your last_name is Tesla.
Your birthday is 7.10.1856.
Your birthplace is Croatia.
This is what I ended up using inside my .bat file. Windows only of course.
set CURRENT_DIR=%cd%
mkdir ./directoryToExtractTo
cd ./directoryToExtractTo
jar xvf %CURRENT_DIR%\myJar.jar
cd %CURRENT_DIR%
You possibly do not have create permissions to the folder. So WinSCP fails to create a temporary file for the transfer.
You have two options:
Grant write permissions to the folder to the user or group you log in with (myuser
), or change the ownership of the folder to the user, or
Disable a transfer to temporary file.
In Preferences, go to Transfer > Endurance page and in Enable transfer resume/transfer to temporary file name for select Disable:
you can use this simple way
<select onchange="location = this.value;">
<option value="/finished">Finished</option>
<option value="/break">Break</option>
<option value="/issue">Issues</option>
<option value="/downtime">Downtime</option>
</select>
will redirect to route url you can direct to .html page or direct to some link just change value
in option.
String is an immutable class. This means that once you instantiate an instance of a string like so:
String str1 = "hello";
The object in memory cannot be altered. Instead you will have to create a new instance, copy the old String and append whatever else as in this example:
String str1 = "hello";
str1 = str1 + " world!";
What is really happening hear is that we are NOT updating the existing str1 object... we are reallocating new memory all together, copying the "hello" data and appending " world!" to the end, then settings the str1 reference to point to this new memory. So it really looks more like this under the hood:
String str1 = "hello";
String str2 = str1 + " world!";
str1 = str2;
So it follows that this "copy + paste and move stuff around in memory" process can be very expensive if done repitively especially recursively.
When you are in that situation of having to do things over and over utilize StringBuilder. It is mutable and can append strings to the end of the current one because it's back by an [growing array] (not 100% if that is the actual data structure, could be a list).
Note: eval() can be easily misused, let say that the request is intercepted by a third party and sends you not trusted code. Then with eval() you would be running this not trusted code. Refer here for the dangers of eval().
Inside the returned HTML/Ajax/JavaScript file, you will have a JavaScript tag. Give it an ID, like runscript. It's uncommon to add an id to these tags, but it's needed to reference it specifically.
<script type="text/javascript" id="runscript">
alert("running from main");
</script>
In the main window, then call the eval function by evaluating only that NEW block of JavaScript code (in this case, it's called runscript):
eval(document.getElementById("runscript").innerHTML);
And it works, at least in Internet Explorer 9 and Google Chrome.
This code will enumerate the graphics devices on the system (if multiple monitors are installed), and you can use that information to determine monitor affinity or automatic placement (some systems use a little side monitor for real-time displays while an app is running in the background, and such a monitor can be identified by size, screen colors, etc.):
// Test if each monitor will support my app's window
// Iterate through each monitor and see what size each is
GraphicsEnvironment ge = GraphicsEnvironment.getLocalGraphicsEnvironment();
GraphicsDevice[] gs = ge.getScreenDevices();
Dimension mySize = new Dimension(myWidth, myHeight);
Dimension maxSize = new Dimension(minRequiredWidth, minRequiredHeight);
for (int i = 0; i < gs.length; i++)
{
DisplayMode dm = gs[i].getDisplayMode();
if (dm.getWidth() > maxSize.getWidth() && dm.getHeight() > maxSize.getHeight())
{ // Update the max size found on this monitor
maxSize.setSize(dm.getWidth(), dm.getHeight());
}
// Do test if it will work here
}
No - there is the $.browser method, but it's deprecated and isn't used in the core.
Loads. jQuery is often chosen because it does AJAX and animations well, and is easily extensible. jQuery doesn't use it's own selector engine, it uses Sizzle, an incredibly fast selector engine.
No - it's quick, relatively small and easy to extend.
For me personally it's nice to know that as browsers include more stuff (classlist API for example) that jQuery will update to include it, meaning that my code runs as fast as possible all the time.
Read through the source if you are interested, http://code.jquery.com/jquery-1.4.3.js - you'll see that features are added based on the best case first, and gradually backported to legacy browsers - for example, a section of the parseJSON method from 1.4.3:
return window.JSON && window.JSON.parse ?
window.JSON.parse( data ) :
(new Function("return " + data))();
As you can see, if window.JSON exists, the browser uses the native JSON parser, if not, then it avoids using eval (because otherwise minfiers won't minify this bit) and sets up a function that returns the data. This idea of assuming modern techniques first, then degrading to older methods is used throughout meaning that new browsers get to use all the whizz bang features without sacrificing legacy compatibility.
If you're connecting to a named instance and UDP is not available when connecting to it, then you may need to specify the protocol as well.
Example: tcp:192.168.1.21\SQL2K5,1443
window.scrollTo(0,1);
this will help you but this javascript is may not work in all browsers
Alternatively, if you do not wish to push to a repository:
Export the container to a tarball
docker export <CONTAINER ID> > /home/export.tar
Move your tarball to new machine
Import it back
cat /home/export.tar | docker import - some-name:latest
For a more robust solution i use something like the following. That way the temp dir will always be deleted after the script exits.
The cleanup function is executed on the EXIT
signal. That guarantees that the cleanup function is always called, even if the script aborts somewhere.
#!/bin/bash
# the directory of the script
DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
# the temp directory used, within $DIR
# omit the -p parameter to create a temporal directory in the default location
WORK_DIR=`mktemp -d -p "$DIR"`
# check if tmp dir was created
if [[ ! "$WORK_DIR" || ! -d "$WORK_DIR" ]]; then
echo "Could not create temp dir"
exit 1
fi
# deletes the temp directory
function cleanup {
rm -rf "$WORK_DIR"
echo "Deleted temp working directory $WORK_DIR"
}
# register the cleanup function to be called on the EXIT signal
trap cleanup EXIT
# implementation of script starts here
...
Directory of bash script from here.
Bash traps.
For PHP 7 (May apply to previous versions as well), but I had to do this:
Add this to the bottom of /etc/apache2/apache2.conf
<FilesMatch \.php$>
SetHandler application/x-httpd-php
</FilesMatch>
Run this from the terminal:
sudo a2dismod mpm_event && sudo a2enmod mpm_prefork && sudo a2enmod php7
Then don't forget to restart Apache so it knows you changed stuff:
sudo service apache2 restart
This is a summary from: https://www.atlantic.net/community/howto/try-php7-lamp-ubuntu-14-04/
To list all local groups which have users assigned to them, use this command:
cut -d: -f1 /etc/group | sort
For more info- > Unix groups, Cut command, sort command
Yes, you can do almost that:
SELECT dbo.GetBusinessDays(a.opendate,a.closedate) as BusinessDays
FROM account a
WHERE...
The '-Wait' option seemed to block for me even though my process had finished.
I tried Adrian's solution and it works. But I used Wait-Process instead of relying on a side effect of retrieving the process handle.
So:
$proc = Start-Process $msbuild -PassThru
Wait-Process -InputObject $proc
if ($proc.ExitCode -ne 0) {
Write-Warning "$_ exited with status code $($proc.ExitCode)"
}
<input type="submit" value="Create" name="button"/>_x000D_
<input type="submit" value="Reset" name="button" />
_x000D_
write the following code in Controler.
[HttpPost]
public ActionResult Login(string button)
{
switch (button)
{
case "Create":
return RedirectToAction("Deshboard", "Home");
break;
case "Reset":
return RedirectToAction("Login", "Home");
break;
}
return View();
}
You can use javascript's indexOf function.
var str1 = "ABCDEFGHIJKLMNOP";_x000D_
var str2 = "DEFG";_x000D_
if(str1.indexOf(str2) != -1){_x000D_
console.log(str2 + " found");_x000D_
}
_x000D_
Actually it's best to use:
IF DB_ID('dms') IS NOT NULL
--code mine :)
print 'db exists'
See https://docs.microsoft.com/en-us/sql/t-sql/functions/db-id-transact-sql and note that this does not make sense with the Azure SQL Database.
For the revised question of how to read in configuration parameters, I'd strongly recommend saving yourself some time and effort and use ConfigParser or (my preferred tool) ConfigObj.
They can do everything you need, they're easy to use, and someone else has already worried about how to get them to work properly!
new string (str.OrderBy(c => c).ToArray())
You can just use numpy arrays. Look at the numpy for matlab users page for a detailed overview of the pros and cons of arrays w.r.t. matrices.
As I mentioned in the comment, having to use the dot()
function or method for mutiplication of vectors is the biggest pitfall. But then again, numpy arrays are consistent. All operations are element-wise. So adding or subtracting arrays and multiplication with a scalar all work as expected of vectors.
Edit2: Starting with Python 3.5 and numpy 1.10 you can use the @
infix-operator for matrix multiplication, thanks to pep 465.
Edit: Regarding your comment:
Yes. The whole of numpy is based on arrays.
Yes. linalg.norm(v)
is a good way to get the length of a vector. But what you get depends on the possible second argument to norm! Read the docs.
To normalize a vector, just divide it by the length you calculated in (2). Division of arrays by a scalar is also element-wise.
An example in ipython:
In [1]: import math
In [2]: import numpy as np
In [3]: a = np.array([4,2,7])
In [4]: np.linalg.norm(a)
Out[4]: 8.3066238629180749
In [5]: math.sqrt(sum([n**2 for n in a]))
Out[5]: 8.306623862918075
In [6]: b = a/np.linalg.norm(a)
In [7]: np.linalg.norm(b)
Out[7]: 1.0
Note that In [5]
is an alternative way to calculate the length. In [6]
shows normalizing the vector.
I got this problem while adding an empty directory. Git doesn't allow to push an empty directory. Here is a simple solution.
Create the file .gitkeep inside of directory you want to push to remote and commit the "empty" directory from the command line:
touch your-directory/.gitkeep
git add your-directory/.gitkeep
git commit -m "Add empty directory"
Here is another gotcha, that took me awhile to see even after reading these posts. I was setting up a script to call my python bin scripts. I was getting the module not callable too.
My zig was that I was doing the following:
from mypackage.bin import myscript
...
myscript(...)
when my zag needed to do the following:
from mypackage.bin.myscript import myscript
...
myscript(...)
In summary, double check your package and module nesting.
What I am trying to do is have a scripts directory that does not have the *.py extension, and still have the 'bin' modules to be in mypackage/bin and these have my *.py extension. I am new to packaging, and trying to follow the standards as I am interpreting them. So, I have at the setup root:
setup.py
scripts/
script1
mypackage/
bin/
script1.py
subpackage1/
subpackage_etc/
If this is not compliant with standard, please let me know.
For some reason, I had to change the asset catalog location to "relative to project" for this to work.
I had also deleted the app from my phone and reinstalled, but it was probably the "relative to project" that did it.
You can easily do this by using UIAlertController
let alertController = UIAlertController(
title: "Your title", message: "Your message", preferredStyle: .alert)
let defaultAction = UIAlertAction(
title: "Close Alert", style: .default, handler: nil)
//you can add custom actions as well
alertController.addAction(defaultAction)
present(alertController, animated: true, completion: nil)
.
Reference: iOS Show Alert
Sheet1.Range("myrange").Rows.Count
/**
* Extension of TreeMap to provide default value getter/creator.
*
* NOTE: This class performs no null key or value checking.
*
* @author N David Brown
*
* @param <K> Key type
* @param <V> Value type
*/
public abstract class Hash<K, V> extends TreeMap<K, V> {
private static final long serialVersionUID = 1905150272531272505L;
/**
* Same as {@link #get(Object)} but first stores result of
* {@link #create(Object)} under given key if key doesn't exist.
*
* @param k
* @return
*/
public V getOrCreate(final K k) {
V v = get(k);
if (v == null) {
v = create(k);
put(k, v);
}
return v;
}
/**
* Same as {@link #get(Object)} but returns specified default value
* if key doesn't exist. Note that default value isn't automatically
* stored under the given key.
*
* @param k
* @param _default
* @return
*/
public V getDefault(final K k, final V _default) {
V v = get(k);
return v == null ? _default : v;
}
/**
* Creates a default value for the specified key.
*
* @param k
* @return
*/
abstract protected V create(final K k);
}
Example Usage:
protected class HashList extends Hash<String, ArrayList<String>> {
private static final long serialVersionUID = 6658900478219817746L;
@Override
public ArrayList<Short> create(Short key) {
return new ArrayList<Short>();
}
}
final HashList haystack = new HashList();
final String needle = "hide and";
haystack.getOrCreate(needle).add("seek")
System.out.println(haystack.get(needle).get(0));
The appearance of the tag is browser-dependent, but you can hide it, build your own interface and control the playback using Javascript.
Check XCode is installed or not.
gcc --version
ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
brew doctor
brew update
http://techsharehub.blogspot.com/2013/08/brew-command-not-found.html "click here for exact instruction updates"
If you are using an eclipse ide, download the mysql jdbc connector jar and point that jar to the build path. Project Java Build Path --> Libraries --> Add external jars. Connector can be obtained from http://dev.mysql.com/downloads/connector/j/
width: intrinsic; /* Safari/WebKit uses a non-standard name */
width: -moz-max-content; /* Firefox/Gecko */
width: -webkit-max-content; /* Chrome */
I liked paxdiablo's script, but wanted a version that ran indefinitely. This version runs ping until a connection is established and then prints a message saying so.
echo "Testing..."
PING_CMD="ping -t 3 -c 1 google.com > /dev/null 2>&1"
eval $PING_CMD
if [[ $? -eq 0 ]]; then
echo "Already connected."
else
echo -n "Waiting for connection..."
while true; do
eval $PING_CMD
if [[ $? -eq 0 ]]; then
echo
echo Connected.
break
else
sleep 0.5
echo -n .
fi
done
fi
I also have a Gist of this script which I'll update with fixes and improvements as needed.
M-x replace-string
RET ;
RET C-q C-j.
C-q for quoted-insert
,
C-j is a newline.
Cheers!
For casting varchar fields/values to number format can be little hack used:
SELECT (`PROD_CODE` * 1) AS `PROD_CODE` FROM PRODUCT`
String delimiter = ",";
StringBuilder sb = new StringBuilder();
for (Item i : list) {
sb.append(delimiter).append(i);
}
sb.toString().replaceFirst(delimiter, "");
Three years later, there is now a solution in Ruby 2.3: The squiggly heredoc.
class Subscription
def warning_message
<<~HEREDOC
Subscription expiring soon!
Your free trial will expire in #{days_until_expiration} days.
Please update your billing information.
HEREDOC
end
end
Blog post link: https://infinum.co/the-capsized-eight/articles/multiline-strings-ruby-2-3-0-the-squiggly-heredoc
The indentation of the least-indented line will be removed from each line of the content.
If you want use it, use runat="server"
for that table. After that use tablename.visible=False
in server side code.
If your system has systemctl
sudo systemctl reload nginx
If your system supports service
(using debian/ubuntu) try this
sudo service nginx reload
If not (using centos/fedora/etc) you can try the init script
sudo /etc/init.d/nginx reload
UPDATE: Suggest using Dataframes
, plus something like ... .write.mode(SaveMode.Overwrite) ...
.
Handy pimp:
implicit class PimpedStringRDD(rdd: RDD[String]) {
def write(p: String)(implicit ss: SparkSession): Unit = {
import ss.implicits._
rdd.toDF().as[String].write.mode(SaveMode.Overwrite).text(p)
}
}
For older versions try
yourSparkConf.set("spark.hadoop.validateOutputSpecs", "false")
val sc = SparkContext(yourSparkConf)
In 1.1.0 you can set conf settings using the spark-submit script with the --conf flag.
WARNING (older versions): According to @piggybox there is a bug in Spark where it will only overwrite files it needs to to write it's part-
files, any other files will be left unremoved.
@Query("SELECT distinct new com.model.referential.Asset(firefCode,firefDescription) FROM AssetClass ")
List<AssetClass> findDistinctAsset();
Create a dynamic view and get result from it.......
CREATE PROCEDURE dbo.usp_userwise_columns_value
(
@userid BIGINT
)
AS
BEGIN
DECLARE @maincmd NVARCHAR(max);
DECLARE @columnlist NVARCHAR(max);
DECLARE @columnname VARCHAR(150);
DECLARE @nickname VARCHAR(50);
SET @maincmd = '';
SET @columnname = '';
SET @columnlist = '';
SET @nickname = '';
DECLARE CUR_COLUMNLIST CURSOR FAST_FORWARD
FOR
SELECT columnname , nickname
FROM dbo.v_userwise_columns
WHERE userid = @userid
OPEN CUR_COLUMNLIST
IF @@ERROR <> 0
BEGIN
ROLLBACK
RETURN
END
FETCH NEXT FROM CUR_COLUMNLIST
INTO @columnname, @nickname
WHILE @@FETCH_STATUS = 0
BEGIN
SET @columnlist = @columnlist + @columnname + ','
FETCH NEXT FROM CUR_COLUMNLIST
INTO @columnname, @nickname
END
CLOSE CUR_COLUMNLIST
DEALLOCATE CUR_COLUMNLIST
IF NOT EXISTS (SELECT * FROM sys.views WHERE name = 'v_userwise_columns_value')
BEGIN
SET @maincmd = 'CREATE VIEW dbo.v_userwise_columns_value AS SELECT sjoid, CONVERT(BIGINT, ' + CONVERT(VARCHAR(10), @userid) + ') as userid , '
+ CHAR(39) + @nickname + CHAR(39) + ' as nickname, '
+ @columnlist + ' compcode FROM dbo.SJOTran '
END
ELSE
BEGIN
SET @maincmd = 'ALTER VIEW dbo.v_userwise_columns_value AS SELECT sjoid, CONVERT(BIGINT, ' + CONVERT(VARCHAR(10), @userid) + ') as userid , '
+ CHAR(39) + @nickname + CHAR(39) + ' as nickname, '
+ @columnlist + ' compcode FROM dbo.SJOTran '
END
EXECUTE sp_executesql @maincmd
END
-----------------------------------------------
SELECT * FROM dbo.v_userwise_columns_value
I think developers can do this for their own apps via iTunes Connect but this doesn't help you if you are looking for stats on other peoples apps.
148Apps also have some aggregate AppStore metrics on their web site that could be useful to you but, again, doesn't really give a low-level breakdown of numbers.
You could also scrape some stats from the RSS feeds generated by the iTunes Store RSS Generator but, again, this just gets currently popular apps rather than actual download numbers.
Old question, but I should note that the general task of parsing XLS files from javascript is tedious and difficult but not impossible.
I have basic parsers implemented in pure JS:
Both pages are HTML5 File API-driven XLS/XLSX parsers (you can drag-drop your file and it will print out the data in the cells in a comma-separated list). You can also generate JSON objects (assuming the first row is a header row).
The test suite http://oss.sheetjs.com/ shows a version that uses XHR to get and parse files.
About J Hardiman's answer, how about:
SELECT empName, projIDs=
REPLACE(
REPLACE(
(SELECT REPLACE(projID, ' ', '-somebody-puts-microsoft-out-of-his-misery-please-') AS [data()] FROM project_members WHERE empName=a.empName FOR XML PATH('')),
' ',
' / '),
'-somebody-puts-microsoft-out-of-his-misery-please-',
' ')
FROM project_members a WHERE empName IS NOT NULL GROUP BY empName
By the way, is the use of "Surname" a typo or am i not understanding a concept here?
Anyway, thanks a lot guys cuz it saved me quite some time :)
None of those work for me.
.fa-volume-down {
color: white;
width: 50% !important;
height: 50% !important;
margin-top: 8%;
margin-left: 7.5%;
font-size: 1em;
background-size: 120%;
}
you can try to put this in your php.ini:
ini_set("display_errors", "1");
error_reporting(E_ALL);
In php.ini file also you can set error_reporting();
import os
for root, dirs, files in os.walk(top, topdown=False):
for name in dirs:
print os.path.join(root, name)
Walk is a good built-in for what you are doing
There are no good reasons not to use them... unless orphaned rows aren't a big deal to you I guess.
vbCrLf
is a relic of Visual Basic 6 days. Though it works exactly the same as Environment.NewLine
, it has only been kept to make the .NET api feel more familiar to VB6 developers switching.
You can call the String.Replace() function to avoid concatenation of many single string values.
MsgBox ("first line \n second line.".Replace("\n", Environment.NewLine))
Or you can try ignoreElements()
as well
input[type='text'], input[type='password']
{
// my css
}
That is the correct way to do it. Sadly CSS is not a programming language.