At work, I needed to log and block SSLv3 connections on ports 993 (IMAPS) and 995 (POP3S) using iptables. So, I combined Gert van Dijk's How to take down SSLv3 in your network using iptables firewall? (POODLE) with Prevok's answer and came up with this:

iptables -N SSLv3
iptables -A SSLv3 -j LOG --log-prefix "SSLv3 Client Hello detected: "
iptables -A SSLv3 -j DROP
iptables -A INPUT \
  -p tcp \! -f -m multiport --dports 993,995 \
  -m state --state ESTABLISHED -m u32 --u32 \
  "0>>22&0x3C@ 12>>26&0x3C@ 0 & 0xFFFFFF00=0x16030000 && \
   0>>22&0x3C@ 12>>26&0x3C@ 2 & 0xFF=0x01 && \
   0>>22&0x3C@ 12>>26&0x3C@ 7 & 0xFFFF=0x0300" \
  -j SSLv3

Explanation

1. To LOG and DROP, create a custom chain (e.g. SSLv3):

   iptables -N SSLv3
   iptables -A SSLv3 -j LOG --log-prefix "SSLv3 Client Hello detected: "
   iptables -A SSLv3 -j DROP
   

2. Then, redirect what you want to LOG and DROP to that chain (see -j SSLv3):

   iptables -A INPUT \
     -p tcp \! -f -m multiport --dports 993,995 \
     -m state --state ESTABLISHED -m u32 --u32 \
     "0>>22&0x3C@ 12>>26&0x3C@ 0 & 0xFFFFFF00=0x16030000 && \
      0>>22&0x3C@ 12>>26&0x3C@ 2 & 0xFF=0x01 && \
      0>>22&0x3C@ 12>>26&0x3C@ 7 & 0xFFFF=0x0300" \
     -j SSLv3
   

Note: mind the order of the rules. Those rules did not work for me until I put them above this one I had on my firewall script:

iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT

For this i looked into running LaTeX apps to generate a pdf. Although this option is likely to be far more complicated and heavy duty than the ones listed here.

Basically you need to look up ArrayList element based on name getName. Two approaches to this problem:

1- Don't use ArrayList, Use HashMap<String,AutionItem> where String would be name

2- Use getName to generate index and use index based addition into array list list.add(int index, E element). One way to generate index from name would be to use its hashCode and modulo by ArrayList current size (something similar what is used inside HashMap)

Initialise here..
 SharedPreferences msharedpref = getSharedPreferences("msh",
                    MODE_PRIVATE);
            Editor editor = msharedpref.edit();

store data...
editor.putString("id",uida); //uida is your string to be stored
editor.commit();
finish();


fetch...
SharedPreferences prefs = this.getSharedPreferences("msh", Context.MODE_PRIVATE);
        uida = prefs.getString("id", "");

I was looking for a solution to add an UIImage to my UIButton. The problem was just it displays the image bigger than needed. Just helped me with this:

_imageViewBackground = [[UIImageView alloc] initWithFrame:rectImageView];
_imageViewBackground.image = [UIImage imageNamed:@"gradientBackgroundPlain"];
[self addSubview:_imageViewBackground];
[self insertSubview:_imageViewBackground belowSubview:self.label];
_imageViewBackground.hidden = YES;

Every time I want to display my UIImageView I just set the var hidden to YES or NO. There might be other solutions but I got confused so many times with this stuff and this solved it and I didn't need to deal with internal stuff UIButton is doing in background.

Not in Linux at the moment, so can't double check, but I think it's:

rpm -ql ffmpeg

That should list all the files installed as part of the ffmpeg package.

If anyone has problems with using a custom dateformat for java.sql.Date, this is the simplest solution:

ObjectMapper mapper = new ObjectMapper();
SimpleModule module = new SimpleModule();
module.addSerializer(java.sql.Date.class, new DateSerializer());
mapper.registerModule(module);

(This SO-answer saved me a lot of trouble: https://stackoverflow.com/a/35212795/3149048 )

Jackson uses the SqlDateSerializer by default for java.sql.Date, but currently, this serializer doesn't take the dateformat into account, see this issue: https://github.com/FasterXML/jackson-databind/issues/1407 . The workaround is to register a different serializer for java.sql.Date as shown in the code example.

SELECT IDENT_CURRENT('Table')

You can use one of these examples:

SELECT * FROM Table 
WHERE ID = (
    SELECT IDENT_CURRENT('Table'))

SELECT * FROM Table
WHERE ID = (
    SELECT MAX(ID) FROM Table)

SELECT TOP 1 * FROM Table
ORDER BY ID DESC

But the first one will be more efficient because no index scan is needed (if you have index on Id column).

The second one solution is equivalent to the third (both of them need to scan table to get max id).

It seems like you can also use the patch command. Put the diff in the root of the repository and run patch from the command line.

patch -i yourcoworkers.diff

or

patch -p0 -i yourcoworkers.diff

You may need to remove the leading folder structure if they created the diff without using --no-prefix.

If so, then you can remove the parts of the folder that don't apply using:

patch -p1 -i yourcoworkers.diff

The -p(n) signifies how many parts of the folder structure to remove.

More information on creating and applying patches here.

You can also use

git apply yourcoworkers.diff --stat 

to see if the diff by default will apply any changes. It may say 0 files affected if the patch is not applied correctly (different folder structure).

Let's say I have code in the directory ~/local_dir/myNewApp, and I want to put it under 'https://svn.host/existing_path/myNewApp' (while being able to ignore some binaries, vendor libraries, etc.).

1. Create an empty folder in the repository svn mkdir https://svn.host/existing_path/myNewApp
2. Go to the parent directory of the project, cd ~/local_dir
3. Check out the empty directory over your local folder. Don't be afraid - the files you have locally will not be deleted. svn co https://svn.host/existing_path/myNewApp. If your folder has a different name locally than in the repository, you must specify it as an additional argument.
4. You can see that svn st will now show all your files as ?, which means that they are not currently under revision control
5. Perform svn add on files you want to add to the repository, and add others to svn:ignore. You may find some useful options with svn help add, for example --parents or --depth empty, when you want selectively add only some files/folders.
6. Commit with svn ci

A garbage collection fixed my problem:

git gc --aggressive --prune=now

Takes a while to complete, but every loose object and/or corrupted index was fixed.

If you can't use JodaTime, you can do the following:

Calendar startCalendar = new GregorianCalendar();
startCalendar.setTime(startDate);
Calendar endCalendar = new GregorianCalendar();
endCalendar.setTime(endDate);

int diffYear = endCalendar.get(Calendar.YEAR) - startCalendar.get(Calendar.YEAR);
int diffMonth = diffYear * 12 + endCalendar.get(Calendar.MONTH) - startCalendar.get(Calendar.MONTH);

Note that if your dates are 2013-01-31 and 2013-02-01, you get a distance of 1 month this way, which may or may not be what you want.

dependencies {
compile fileTree(dir: 'libs', include: ['*.jar'])
compile 'com.android.support:appcompat-v7:21.0.3'
compile 'com.android.support:recyclerview-v7:21.0.0'
}

Just make your dependencies like above in build.gradle file, worked for me.

You can try Out this Custom AGTableView

To Set a TableView Height Constraint Using storyboard or programmatically. (This class automatically fetch a height constraint and set content view height to yourtableview height).

class AGTableView: UITableView {

    fileprivate var heightConstraint: NSLayoutConstraint!

    override init(frame: CGRect, style: UITableViewStyle) {
        super.init(frame: frame, style: style)
        self.associateConstraints()
    }

    required public init?(coder aDecoder: NSCoder) {
        super.init(coder: aDecoder)
        self.associateConstraints()
    }

    override open func layoutSubviews() {
        super.layoutSubviews()

        if self.heightConstraint != nil {
            self.heightConstraint.constant = self.contentSize.height
        }
        else{
            self.sizeToFit()
            print("Set a heightConstraint to Resizing UITableView to fit content")
        }
    }

    func associateConstraints() {
        // iterate through height constraints and identify

        for constraint: NSLayoutConstraint in constraints {
            if constraint.firstAttribute == .height {
                if constraint.relation == .equal {
                    heightConstraint = constraint
                }
            }
        }
    }
}

Note If any problem to set a Height then yourTableView.layoutSubviews().

If you are using curl on Windows:

curl -H "Content-Type: application/xml" -d "<?xml version="""1.0""" encoding="""UTF-8""" standalone="""yes"""?><message><sender>Me</sender><content>Hello!</content></message>" http://localhost:8080/webapp/rest/hello

How about

session.query(MyUserClass).filter(MyUserClass.id.in_((123,456))).all()

edit: Without the ORM, it would be

session.execute(
    select(
        [MyUserTable.c.id, MyUserTable.c.name], 
        MyUserTable.c.id.in_((123, 456))
    )
).fetchall()

select() takes two parameters, the first one is a list of fields to retrieve, the second one is the where condition. You can access all fields on a table object via the c (or columns) property.

You need to specify the @Provider that @Produces(MediaType.APPLICATION_XML) from B.class
An add the package of your MessageBodyWriter<B.class> to your /WEB_INF/web.xml as:

<init-param>
<param-name>com.sun.jersey.config.property.packages</param-name>
<param-value>
your.providers.package
</param-value>
</init-param>

SQL Server databases use two files - an MDF file, known as the primary database file, which contains the schema and data, and a LDF file, which contains the logs. See wikipedia. A database may also use secondary database file, which normally uses a .ndf extension.

As John S. indicates, these file extensions are purely convention - you can use whatever you want, although I can't think of a good reason to do that.

More info on MSDN here and in Beginning SQL Server 2005 Administation (Google Books) here.

Checking that strings are integers is separate to comparing if one is greater or lesser than another. You should always compare number with number and string with string as the algorithm for dealing with mixed types not easy to remember.

'00100' < '1' // true

as they are both strings so only the first zero of '00100' is compared to '1' and because it's charCode is lower, it evaluates as lower.

However:

'00100' < 1 // false

as the RHS is a number, the LHS is converted to number before the comparision.

A simple integer check is:

function isInt(n) {
  return /^[+-]?\d+$/.test(n);
}

It doesn't matter if n is a number or integer, it will be converted to a string before the test.

If you really care about performance, then:

var isInt = (function() {
  var re = /^[+-]?\d+$/;

  return function(n) {
    return re.test(n);
  }
}());

Noting that numbers like 1.0 will return false. If you want to count such numbers as integers too, then:

var isInt = (function() {
  var re = /^[+-]?\d+$/;
  var re2 = /\.0+$/;

  return function(n) {
    return re.test((''+ n).replace(re2,''));
  }
}());

Once that test is passed, converting to number for comparison can use a number of methods. I don't like parseInt() because it will truncate floats to make them look like ints, so all the following will be "equal":

parseInt(2.9) == parseInt('002',10) == parseInt('2wewe')

and so on.

Once numbers are tested as integers, you can use the unary + operator to convert them to numbers in the comparision:

if (isInt(a) && isInt(b)) {
  if (+a < +b) {
    // a and b are integers and a is less than b
  }
}

Other methods are:

Number(a); // liked by some because it's clear what is happening
a * 1      // Not really obvious but it works, I don't like it

Current route properties are present in this.$route, this.$router is the instance of router object which gives the configuration of the router. You can get the current route query using this.$route.query

I have below 3 suggestion to this on JSX onClick Events -

1. Actually, we don't need to use .bind() or Arrow function in our code. You can simple use in your code.

2. You can also move onClick event from th(or ul) to tr(or li) to improve the performance. Basically you will have n number of "Event Listeners" for your n li element.

   So finally code will look like this:
   <ul onClick={this.onItemClick}>
       {this.props.items.map(item =>
              <li key={item.id} data-itemid={item.id}>
                  ...
              </li>
         )}
   </ul>
   

   // And you can access item.id in onItemClick method as shown below:

   onItemClick = (event) => {
      console.log(e.target.getAttribute("item.id"));
   }
   

3. I agree with the approach mention above for creating separate React Component for ListItem and List. This make code looks good however if you have 1000 of li then 1000 Event Listeners will be created. Please make sure you should not have much event listener.

   import React from "react";
   import ListItem from "./ListItem";
   export default class List extends React.Component {
   
       /**
       * This List react component is generic component which take props as list of items and also provide onlick
       * callback name handleItemClick
       * @param {String} item - item object passed to caller
       */
       handleItemClick = (item) => {
           if (this.props.onItemClick) {
               this.props.onItemClick(item);
           }
       }
   
       /**
       * render method will take list of items as a props and include ListItem component
       * @returns {string} - return the list of items
       */
       render() {
           return (
               <div>
                 {this.props.items.map(item =>
                     <ListItem key={item.id} item={item} onItemClick={this.handleItemClick}/>
                 )}
               </div>
           );
       }
   
   }
   
   
   import React from "react";
   
   export default class ListItem extends React.Component {
       /**
       * This List react component is generic component which take props as item and also provide onlick
       * callback name handleItemClick
       * @param {String} item - item object passed to caller
       */
       handleItemClick = () => {
           if (this.props.item && this.props.onItemClick) {
               this.props.onItemClick(this.props.item);
           }
       }
       /**
       * render method will take item as a props and print in li
       * @returns {string} - return the list of items
       */
       render() {
           return (
               <li key={this.props.item.id} onClick={this.handleItemClick}>{this.props.item.text}</li>
           );
       }
   }
   

You're referencing a DOM element when doing something like $('#lastName'). That's an element with id attribute "lastName". Why do that? You want to reference the value stored in a local variable, completely unrelated. Try this (assuming the assignment to formObject is in the same scope as the variable declarations) -

var formObject = {
    formObject: [
        {
            firstName:firstName,  // no need to quote variable names
            lastName:lastName
        },
        {
            phoneNumber:phoneNumber,
            address:address
        }
    ]
};

This seems very odd though: you're creating an object "formObject" that contains a member called "formObject" that contains an array of objects.

If you want to display single value access from database into textbox, please refer to the code below:

SqlConnection con=new SqlConnection("connection string");
SqlCommand cmd=new SqlConnection(SqlQuery,Con);
Con.Open();
TextBox1.Text=cmd.ExecuteScalar();
Con.Close();

or

SqlConnection con=new SqlConnection("connection string");
SqlCommand cmd=new SqlConnection(SqlQuery,Con);
Con.Open();
SqlDataReader dr=new SqlDataReadr();
dr=cmd.Executereader();
if(dr.read())
{
    TextBox1.Text=dr.GetValue(0).Tostring();
}
Con.Close();

I know this is a little late, but here's the solution I had to come up with for handling dates when you want to be timezone independent. Essentially it involves converting everything to UTC.

From Javascript to Server:

Send out dates as epoch values with the timezone offset removed.

var d = new Date(2015,0,1) // Jan 1, 2015
// Ajax Request to server ...
$.ajax({
  url: '/target',
  params: { date: d.getTime() - (d.getTimezoneOffset() * 60 * 1000) }
});

The server then recieves 1420070400000 as the date epoch.

On the Server side, convert that epoch value to a datetime object:

DateTime d = new DateTime(1970, 1, 1, 0, 0, 0).AddMilliseconds(epoch);

At this point the date is just the date/time provided by the user as they provided it. Effectively it is UTC.

Going the other way:

When the server pulls data from the database, presumably in UTC, get the difference as an epoch (making sure that both date objects are either local or UTC):

long ms = (long)utcDate.Subtract(new DateTime(1970, 1, 1, 0, 0, 0, DateTimeKind.Utc)).TotalMilliseconds;

or

long ms = (long)localDate.Subtract(new DateTime(1970, 1, 1, 0, 0, 0, DateTimeKind.Local)).TotalMilliseconds;

When javascript receives this value, create a new date object. However, this date object is going to be assumed local time, so you need to offset it by the current timezone:

var epochValue = 1420070400000 // value pulled from server.
var utcDateVal = new Date(epochValue);
var actualDate = new Date(utcDateVal.getTime() + (utcDateVal.getTimezoneOffset() * 60 * 1000))

console.log(utcDateVal); // Wed Dec 31 2014 19:00:00 GMT-0500 (Eastern Standard Time)
console.log(actualDate); // Thu Jan 01 2015 00:00:00 GMT-0500 (Eastern Standard Time)

As far as I know, this should work for any time zone where you need to display dates that are timezone independent.

Using new api fetch:

const dataToSend = JSON.stringify({"email": "[email protected]", "password": "101010"});
let dataReceived = ""; 
fetch("", {
    credentials: "same-origin",
    mode: "same-origin",
    method: "post",
    headers: { "Content-Type": "application/json" },
    body: dataToSend
})
    .then(resp => {
        if (resp.status === 200) {
            return resp.json()
        } else {
            console.log("Status: " + resp.status)
            return Promise.reject("server")
        }
    })
    .then(dataJson => {
        dataReceived = JSON.parse(dataJson)
    })
    .catch(err => {
        if (err === "server") return
        console.log(err)
    })

console.log(`Received: ${dataReceived}`)                

You can just use numpy arrays. Look at the numpy for matlab users page for a detailed overview of the pros and cons of arrays w.r.t. matrices.

As I mentioned in the comment, having to use the dot() function or method for mutiplication of vectors is the biggest pitfall. But then again, numpy arrays are consistent. All operations are element-wise. So adding or subtracting arrays and multiplication with a scalar all work as expected of vectors.

Edit2: Starting with Python 3.5 and numpy 1.10 you can use the @ infix-operator for matrix multiplication, thanks to pep 465.

Edit: Regarding your comment:

1. Yes. The whole of numpy is based on arrays.

2. Yes. linalg.norm(v) is a good way to get the length of a vector. But what you get depends on the possible second argument to norm! Read the docs.

3. To normalize a vector, just divide it by the length you calculated in (2). Division of arrays by a scalar is also element-wise.

   An example in ipython:

   In [1]: import math
   
   In [2]: import numpy as np
   
   In [3]: a = np.array([4,2,7])
   
   In [4]: np.linalg.norm(a)
   Out[4]: 8.3066238629180749
   
   In [5]: math.sqrt(sum([n**2 for n in a]))
   Out[5]: 8.306623862918075
   
   In [6]: b = a/np.linalg.norm(a)
   
   In [7]: np.linalg.norm(b)
   Out[7]: 1.0
   

   Note that In [5] is an alternative way to calculate the length. In [6] shows normalizing the vector.

Python 3.6 will add literal string interpolation similar to Ruby's string interpolation. Starting with that version of Python (which is scheduled to be released by the end of 2016), you will be able to include expressions in "f-strings", e.g.

name = "Spongebob Squarepants"
print(f"Who lives in a Pineapple under the sea? {name}.")

Prior to 3.6, the closest you can get to this is

name = "Spongebob Squarepants"
print("Who lives in a Pineapple under the sea? %(name)s." % locals())

The % operator can be used for string interpolation in Python. The first operand is the string to be interpolated, the second can have different types including a "mapping", mapping field names to the values to be interpolated. Here I used the dictionary of local variables locals() to map the field name name to its value as a local variable.

The same code using the .format() method of recent Python versions would look like this:

name = "Spongebob Squarepants"
print("Who lives in a Pineapple under the sea? {name!s}.".format(**locals()))

There is also the string.Template class:

tmpl = string.Template("Who lives in a Pineapple under the sea? $name.")
print(tmpl.substitute(name="Spongebob Squarepants"))

Python3 was recently added to EPEL7 as Python34.

There is ongoing (currently) effort to make packaging guidelines about how to package things for Python3 in EPEL7.

See https://bugzilla.redhat.com/show_bug.cgi?id=1219411
and https://lists.fedoraproject.org/pipermail/python-devel/2015-July/000721.html

You can use Jinja's default:

- name: Create user
  user:
    name: "{{ my_variable | default('default_value') }}"

It can also be as simple as this.

@media (orientation: landscape) {

}

To reset the default settings I'm not sure, but if you're just trying to get a menu bar back then try right clicking on the anywhere on the toolbar area and clicking the toolbar you need.

EDIT:
Figured out how to reset the settings Click on the tools button on the top, click "Import and Export Settings" and then click "Reset All Settings". Then go through the wizard from there.

NOTE: This answer obviously defeats the purpose of SSL and should be used sparingly as a last resort.

For those having issues with scripts that download scripts that download scripts and want a quick fix, create a file called ~/.curlrc

With the contents

--insecure

This will cause curl to ignore SSL certificate problems by default.

Make sure you delete the file when done.

UPDATE

12 days later I got notified of an upvote on this answer, which made me go "Hmmm, did I follow my own advice remember to delete that .curlrc?", and discovered I hadn't. So that really underscores how easy it is to leave your curl insecure by following this method.

 var number = 200
 if (number >= 500 || number <= 600){
    alert("your message");
 }

A simple alternative is to let the C# environment increment the assembly version for you by setting the version attribute to major.minor.* (as described in the AssemblyInfo file template.)

You may be looking for a more comprehensive solution, though.

EDIT (Response to the question in a comment):

From AssemblyInfo.cs:

// Version information for an assembly consists of the following four values:
//
//      Major Version
//      Minor Version 
//      Build Number
//      Revision
//
// You can specify all the values or you can default the Build and Revision Numbers 
// by using the '*' as shown below:
// [assembly: AssemblyVersion("1.0.*")]

Here an improved answer of ShravankumarKumar. I created special classes for the pages so you can access words in the pdf based on the text rows and the word in that row.

using iTextSharp.text.pdf;
using iTextSharp.text.pdf.parser;

//create a list of pdf pages
var pages = new List<PdfPage>();

//load the pdf into the reader. NOTE: path can also be replaced with a byte array
using (PdfReader reader = new PdfReader(path))
{
    //loop all the pages and extract the text
    for (int i = 1; i <= reader.NumberOfPages; i++)
    {
        pages.Add(new PdfPage()
        {
           content = PdfTextExtractor.GetTextFromPage(reader, i)
        });
    }
}

//use linq to create the rows and words by splitting on newline and space
pages.ForEach(x => x.rows = x.content.Split('\n').Select(y => 
    new PdfRow() { 
       content = y,
       words = y.Split(' ').ToList()
    }
).ToList());

The custom classes

class PdfPage
{
    public string content { get; set; }
    public List<PdfRow> rows { get; set; }
}


class PdfRow
{
    public string content { get; set; }
    public List<string> words { get; set; }
}

Now you can get a word by row and word index.

string myWord = pages[0].rows[12].words[4];

Or use Linq to find the rows containing a specific word.

//find the rows in a specific page containing a word
var myRows = pages[0].rows.Where(x => x.words.Any(y => y == "myWord1")).ToList();

//find the rows in all pages containing a word
var myRows = pages.SelectMany(r => r.rows).Where(x => x.words.Any(y => y == "myWord2")).ToList();

In addition to above differences following are few more:

1. RV separates view creation and binding of data to view. In LV, you need to check if convertView is null or not for creating view, before binding data to it. So, in case of RV, view will be created only when it is needed but in case of LV, one can miss the check for convertview and will create view everytime.

2. Switching between Grid and List is more easy now with LayoutManager.

3. No need to notify and update all items, even if only single item is changed.

4. One had to implement view caching in case of LV. It is provided in RV by default. (There is difference between view caching n recycling.)

5. Very easy item animations in case of RV.

What helped me, was right clicking the 'IISExpress' icon, 'Show All applications'. Then selecting the website and I saw which aplicationhost.config it uses, and the the correction went perfectly.

Does exactly what you want.

System.IO.Directory.GetFiles

This is relatively simple in the specific case, but quite tricky in the general case.

HttpClient httpclient = new DefaultHttpClient();
HttpGet httpget = new HttpGet("http://stackoverflow.com/");
HttpResponse response = httpclient.execute(httpget);
HttpEntity entity = response.getEntity();
System.out.println(EntityUtils.getContentMimeType(entity));
System.out.println(EntityUtils.getContentCharSet(entity));

The answer depends on the Content-Type HTTP response header.

This header contains information about the payload and might define the encoding of textual data. Even if you assume text types, you may need to inspect the content itself in order to determine the correct character encoding. E.g. see the HTML 4 spec for details on how to do that for that particular format.

Once the encoding is known, an InputStreamReader can be used to decode the data.

This answer depends on the server doing the right thing - if you want to handle cases where the response headers don't match the document, or the document declarations don't match the encoding used, that's another kettle of fish.

This is called Fixed Header Scrolling. There are a number of documented approaches:

http://www.imaputz.com/cssStuff/bigFourVersion.html

You won't effectively pull this off without JavaScript ... especially if you want cross browser support.

There are a number of gotchyas with any approach you take, especially concerning cross browser/version support.

Edit:

Even if it's not the header you want to fix, but the first row of data, the concept is still the same. I wasn't 100% which you were referring to.

Additional thought I was tasked by my company to research a solution for this that could function in IE7+, Firefox, and Chrome.

After many moons of searching, trying, and frustration it really boiled down to a fundamental problem. For the most part, in order to gain the fixed header, you need to implement fixed height/width columns because most solutions involve using two separate tables, one for the header which will float and stay in place over the second table that contains the data.

//float this one right over second table
<table>
  <tr>
    <th>Header 1</th>
    <th>Header 2</th>
  </tr>
</table>

<table>
//Data
</table>

An alternative approach some try is utilize the tbody and thead tags but that is flawed too because IE will not allow you put a scrollbar on the tbody which means you can't limit its height (so stupid IMO).

<table>
  <thead style="do some stuff to fix its position">
  <tr>
    <th>Header 1</th>
    <th>Header 2</th>
  </tr>
  </thead>
  <tbody style="No scrolling allowed here!">
     Data here
  </tbody>
</table>

This approach has many issues such as ensures EXACT pixel widths because tables are so cute in that different browsers will allocate pixels differently based on calculations and you simply CANNOT (AFAIK) guarantee that the distribution will be perfect in all cases. It becomes glaringly obvious if you have borders within your table.

I took a different approach and said screw tables since you can't make this guarantee. I used divs to mimic tables. This also has issues of positioning the rows and columns (mainly because floating has issues, using in-line block won't work for IE7, so it really left me with using absolute positioning to put them in their proper places).

There is someone out there that made the Slick Grid which has a very similar approach to mine and you can use and a good (albeit complex) example for achieving this.

https://github.com/6pac/SlickGrid/wiki

When you allow the 9000 port to firewall on your desired operating System the following error "ERROR: Sonar server 'http://localhost:9000' can not be reached" will remove successfully.In ubuntu it is just like as by typing the following command in terminal "sudo ufw allow 9000/tcp" this error will removed from the Jenkins server by clicking on build now in jenkins.

I was running into the same problem, here is how I got it working..

open terminal:

mkdir testExpress
cd testExpress
npm install request

or

sudo npm install -g request // If you would like to globally install.

now don't use

node app.js or node test.js, you will run into this problem doing so. You can also print the problem that is being cause by using this command.. "node -p app.js"

The above command to start nodeJs has been deprecated. Instead use

npm start

You should see this..

[email protected] start /Users/{username}/testExpress
node ./bin/www

Open your web browser and check for localhost:3000

You should see Express install (Welcome to Express)

Inside catalina.bat set the port on which you wish to start the debugger

if not "%JPDA_ADDRESS%" == "" goto gotJpdaAddress
set JPDA_ADDRESS=9001

Then you can simply start the debugger with

catalina.bat jpda 

Now from Eclipse or IDEA select remote debugging and start start debugging by connecting to port 9001.

If you want the default colors of Android ICS, you just have to go to your Android SDK and look for this path: platforms\android-15\data\res\values\colors.xml.

Here you go:

<!-- For holo theme -->
    <drawable name="screen_background_holo_light">#fff3f3f3</drawable>
    <drawable name="screen_background_holo_dark">#ff000000</drawable>
    <color name="background_holo_dark">#ff000000</color>
    <color name="background_holo_light">#fff3f3f3</color>
    <color name="bright_foreground_holo_dark">@android:color/background_holo_light</color>
    <color name="bright_foreground_holo_light">@android:color/background_holo_dark</color>
    <color name="bright_foreground_disabled_holo_dark">#ff4c4c4c</color>
    <color name="bright_foreground_disabled_holo_light">#ffb2b2b2</color>
    <color name="bright_foreground_inverse_holo_dark">@android:color/bright_foreground_holo_light</color>
    <color name="bright_foreground_inverse_holo_light">@android:color/bright_foreground_holo_dark</color>
    <color name="dim_foreground_holo_dark">#bebebe</color>
    <color name="dim_foreground_disabled_holo_dark">#80bebebe</color>
    <color name="dim_foreground_inverse_holo_dark">#323232</color>
    <color name="dim_foreground_inverse_disabled_holo_dark">#80323232</color>
    <color name="hint_foreground_holo_dark">#808080</color>
    <color name="dim_foreground_holo_light">#323232</color>
    <color name="dim_foreground_disabled_holo_light">#80323232</color>
    <color name="dim_foreground_inverse_holo_light">#bebebe</color>
    <color name="dim_foreground_inverse_disabled_holo_light">#80bebebe</color>
    <color name="hint_foreground_holo_light">#808080</color>
    <color name="highlighted_text_holo_dark">#6633b5e5</color>
    <color name="highlighted_text_holo_light">#6633b5e5</color>
    <color name="link_text_holo_dark">#5c5cff</color>
    <color name="link_text_holo_light">#0000ee</color>

This for the Background:

<color name="background_holo_dark">#ff000000</color>
<color name="background_holo_light">#fff3f3f3</color>

You won't get the same colors if you look this up in Photoshop etc. because they are set up with Alpha values.

Update for API Level 19:

<resources>
    <drawable name="screen_background_light">#ffffffff</drawable>
    <drawable name="screen_background_dark">#ff000000</drawable>
    <drawable name="status_bar_closed_default_background">#ff000000</drawable>
    <drawable name="status_bar_opened_default_background">#ff000000</drawable>
    <drawable name="notification_item_background_color">#ff111111</drawable>
    <drawable name="notification_item_background_color_pressed">#ff454545</drawable>
    <drawable name="search_bar_default_color">#ff000000</drawable>
    <drawable name="safe_mode_background">#60000000</drawable>
    <!-- Background drawable that can be used for a transparent activity to
         be able to display a dark UI: this darkens its background to make
         a dark (default theme) UI more visible. -->
    <drawable name="screen_background_dark_transparent">#80000000</drawable>
    <!-- Background drawable that can be used for a transparent activity to
         be able to display a light UI: this lightens its background to make
         a light UI more visible. -->
    <drawable name="screen_background_light_transparent">#80ffffff</drawable>
    <color name="safe_mode_text">#80ffffff</color>
    <color name="white">#ffffffff</color>
    <color name="black">#ff000000</color>
    <color name="transparent">#00000000</color>
    <color name="background_dark">#ff000000</color>
    <color name="background_light">#ffffffff</color>
    <color name="bright_foreground_dark">@android:color/background_light</color>
    <color name="bright_foreground_light">@android:color/background_dark</color>
    <color name="bright_foreground_dark_disabled">#80ffffff</color>
    <color name="bright_foreground_light_disabled">#80000000</color>
    <color name="bright_foreground_dark_inverse">@android:color/bright_foreground_light</color>
    <color name="bright_foreground_light_inverse">@android:color/bright_foreground_dark</color>
    <color name="dim_foreground_dark">#bebebe</color>
    <color name="dim_foreground_dark_disabled">#80bebebe</color>
    <color name="dim_foreground_dark_inverse">#323232</color>
    <color name="dim_foreground_dark_inverse_disabled">#80323232</color>
    <color name="hint_foreground_dark">#808080</color>
    <color name="dim_foreground_light">#323232</color>
    <color name="dim_foreground_light_disabled">#80323232</color>
    <color name="dim_foreground_light_inverse">#bebebe</color>
    <color name="dim_foreground_light_inverse_disabled">#80bebebe</color>
    <color name="hint_foreground_light">#808080</color>
    <color name="highlighted_text_dark">#9983CC39</color>
    <color name="highlighted_text_light">#9983CC39</color>
    <color name="link_text_dark">#5c5cff</color>
    <color name="link_text_light">#0000ee</color>
    <color name="suggestion_highlight_text">#177bbd</color>

    <drawable name="stat_notify_sync_noanim">@drawable/stat_notify_sync_anim0</drawable>
    <drawable name="stat_sys_download_done">@drawable/stat_sys_download_done_static</drawable>
    <drawable name="stat_sys_upload_done">@drawable/stat_sys_upload_anim0</drawable>
    <drawable name="dialog_frame">@drawable/panel_background</drawable>
    <drawable name="alert_dark_frame">@drawable/popup_full_dark</drawable>
    <drawable name="alert_light_frame">@drawable/popup_full_bright</drawable>
    <drawable name="menu_frame">@drawable/menu_background</drawable>
    <drawable name="menu_full_frame">@drawable/menu_background_fill_parent_width</drawable>
    <drawable name="editbox_dropdown_dark_frame">@drawable/editbox_dropdown_background_dark</drawable>
    <drawable name="editbox_dropdown_light_frame">@drawable/editbox_dropdown_background</drawable>

    <drawable name="dialog_holo_dark_frame">@drawable/dialog_full_holo_dark</drawable>
    <drawable name="dialog_holo_light_frame">@drawable/dialog_full_holo_light</drawable>

    <drawable name="input_method_fullscreen_background">#fff9f9f9</drawable>
    <drawable name="input_method_fullscreen_background_holo">@drawable/screen_background_holo_dark</drawable>
    <color name="input_method_navigation_guard">#ff000000</color>

    <!-- For date picker widget -->
    <drawable name="selected_day_background">#ff0092f4</drawable>

    <!-- For settings framework -->
    <color name="lighter_gray">#ddd</color>
    <color name="darker_gray">#aaa</color>

    <!-- For security permissions -->
    <color name="perms_dangerous_grp_color">#33b5e5</color>
    <color name="perms_dangerous_perm_color">#33b5e5</color>
    <color name="shadow">#cc222222</color>
    <color name="perms_costs_money">#ffffbb33</color>

    <!-- For search-related UIs -->
    <color name="search_url_text_normal">#7fa87f</color>
    <color name="search_url_text_selected">@android:color/black</color>
    <color name="search_url_text_pressed">@android:color/black</color>
    <color name="search_widget_corpus_item_background">@android:color/lighter_gray</color>

    <!-- SlidingTab -->
    <color name="sliding_tab_text_color_active">@android:color/black</color>
    <color name="sliding_tab_text_color_shadow">@android:color/black</color>

    <!-- keyguard tab -->
    <color name="keyguard_text_color_normal">#ffffff</color>
    <color name="keyguard_text_color_unlock">#a7d84c</color>
    <color name="keyguard_text_color_soundoff">#ffffff</color>
    <color name="keyguard_text_color_soundon">#e69310</color>
    <color name="keyguard_text_color_decline">#fe0a5a</color>

    <!-- keyguard clock -->
    <color name="lockscreen_clock_background">#ffffffff</color>
    <color name="lockscreen_clock_foreground">#ffffffff</color>
    <color name="lockscreen_clock_am_pm">#ffffffff</color>
    <color name="lockscreen_owner_info">#ff9a9a9a</color>

    <!-- keyguard overscroll widget pager -->
    <color name="kg_multi_user_text_active">#ffffffff</color>
    <color name="kg_multi_user_text_inactive">#ff808080</color>
    <color name="kg_widget_pager_gradient">#ffffffff</color>

    <!-- FaceLock -->
    <color name="facelock_spotlight_mask">#CC000000</color>

    <!-- For holo theme -->
      <drawable name="screen_background_holo_light">#fff3f3f3</drawable>
      <drawable name="screen_background_holo_dark">#ff000000</drawable>
    <color name="background_holo_dark">#ff000000</color>
    <color name="background_holo_light">#fff3f3f3</color>
    <color name="bright_foreground_holo_dark">@android:color/background_holo_light</color>
    <color name="bright_foreground_holo_light">@android:color/background_holo_dark</color>
    <color name="bright_foreground_disabled_holo_dark">#ff4c4c4c</color>
    <color name="bright_foreground_disabled_holo_light">#ffb2b2b2</color>
    <color name="bright_foreground_inverse_holo_dark">@android:color/bright_foreground_holo_light</color>
    <color name="bright_foreground_inverse_holo_light">@android:color/bright_foreground_holo_dark</color>
    <color name="dim_foreground_holo_dark">#bebebe</color>
    <color name="dim_foreground_disabled_holo_dark">#80bebebe</color>
    <color name="dim_foreground_inverse_holo_dark">#323232</color>
    <color name="dim_foreground_inverse_disabled_holo_dark">#80323232</color>
    <color name="hint_foreground_holo_dark">#808080</color>
    <color name="dim_foreground_holo_light">#323232</color>
    <color name="dim_foreground_disabled_holo_light">#80323232</color>
    <color name="dim_foreground_inverse_holo_light">#bebebe</color>
    <color name="dim_foreground_inverse_disabled_holo_light">#80bebebe</color>
    <color name="hint_foreground_holo_light">#808080</color>
    <color name="highlighted_text_holo_dark">#6633b5e5</color>
    <color name="highlighted_text_holo_light">#6633b5e5</color>
    <color name="link_text_holo_dark">#5c5cff</color>
    <color name="link_text_holo_light">#0000ee</color>

    <!-- Group buttons -->
    <eat-comment />
    <color name="group_button_dialog_pressed_holo_dark">#46c5c1ff</color>
    <color name="group_button_dialog_focused_holo_dark">#2699cc00</color>

    <color name="group_button_dialog_pressed_holo_light">#ffffffff</color>
    <color name="group_button_dialog_focused_holo_light">#4699cc00</color>

    <!-- Highlight colors for the legacy themes -->
    <eat-comment />
    <color name="legacy_pressed_highlight">#fffeaa0c</color>
    <color name="legacy_selected_highlight">#fff17a0a</color>
    <color name="legacy_long_pressed_highlight">#ffffffff</color>

    <!-- General purpose colors for Holo-themed elements -->
    <eat-comment />

    <!-- A light Holo shade of blue -->
    <color name="holo_blue_light">#ff33b5e5</color>
    <!-- A light Holo shade of gray -->
    <color name="holo_gray_light">#33999999</color>
    <!-- A light Holo shade of green -->
    <color name="holo_green_light">#ff99cc00</color>
    <!-- A light Holo shade of red -->
    <color name="holo_red_light">#ffff4444</color>
    <!-- A dark Holo shade of blue -->
    <color name="holo_blue_dark">#ff0099cc</color>
    <!-- A dark Holo shade of green -->
    <color name="holo_green_dark">#ff669900</color>
    <!-- A dark Holo shade of red -->
    <color name="holo_red_dark">#ffcc0000</color>
    <!-- A Holo shade of purple -->
    <color name="holo_purple">#ffaa66cc</color>
    <!-- A light Holo shade of orange -->
    <color name="holo_orange_light">#ffffbb33</color>
    <!-- A dark Holo shade of orange -->
    <color name="holo_orange_dark">#ffff8800</color>
    <!-- A really bright Holo shade of blue -->
    <color name="holo_blue_bright">#ff00ddff</color>
    <!-- A really bright Holo shade of gray -->
    <color name="holo_gray_bright">#33CCCCCC</color>

    <drawable name="notification_template_icon_bg">#3333B5E5</drawable>
    <drawable name="notification_template_icon_low_bg">#0cffffff</drawable>

    <!-- Keyguard colors -->
    <color name="keyguard_avatar_frame_color">#ffffffff</color>
    <color name="keyguard_avatar_frame_shadow_color">#80000000</color>
    <color name="keyguard_avatar_nick_color">#ffffffff</color>
    <color name="keyguard_avatar_frame_pressed_color">#ff35b5e5</color>

    <color name="accessibility_focus_highlight">#80ffff00</color>
</resources>

<input type ="text" id="txtComputer">

css

input[type="text"]
{
    font-size:24px;
}

I think the better answer for this questions is

array_diff() 

because it Compares array against one or more other arrays and returns the values in array that are not present in any of the other arrays.

Whereas

array_intersect() returns an array containing all the values of array that are present in all the arguments. Note that keys are preserved.

I'd suggest trying to avoid using return/exit if you don't have to. Some people will devoutly tell you to NEVER do it, but sometimes it just makes sense. However if you can structure you checks so that you don't have to enter into them, I think it makes it easier for people to follow your code later.

I'm using Ubuntu 19.10, I too had the same issue what I just did is deleting all virtual devices and create a new one.

Unexpected end of input means that the parser has ended prematurely. For example, it might be expecting "abcd...wxyz" but only sees "abcd...wxy.

This can be a typo error somewhere, or it could be a problem you get when encodings are mixed across different parts of the application.

One example: consider you are receiving data from a native app using chrome.runtime.sendNativeMessage:

chrome.runtime.sendNativeMessage('appname', {toJSON:()=>{return msg}}, (data)=>{
    console.log(data);
});

Now before your callback is called, the browser would attempt to parse the message using JSON.parse which can give you "unexpected end of input" errors if the supplied byte length does not match the data.

Taking it further you could even parse on the fly

e.g.

& "my.exe" | %{
    if ($_ -match 'OK')
    { Write-Host $_ -f Green }
    else if ($_ -match 'FAIL|ERROR')
    { Write-Host $_ -f Red }
    else 
    { Write-Host $_ }
}

Sometimes you still need to use FirstOrDefault if you have to do different tests. If the Key component of your dictionnary is nullable, you can do this:

thisTag = _tags.FirstOrDefault(t => t.Key.SubString(1,1) == 'a');
if(thisTag.Key != null) { ... }

Using FirstOrDefault, the returned KeyValuePair's key and value will both be null if no match is found.

You could use an image submit button:

<input type="image" src="images/login.jpg" alt="Submit Form" />

No need to write own css, there is an library called "Bootstrap css" by calling that in your HTML head section, we can achieve many stylings,Here is an example: If you want to provide two column in a row, you can simply do the following:

<link rel="stylesheet" href="https://maxcdn.bootstrapcdn.com/bootstrap/3.3.7/css/bootstrap.min.css">_x000D_
_x000D_
<div class="row">_x000D_
  <div class="col-md-6">Content</div>_x000D_
  <div class="col-md-6">Content</div>_x000D_
</div>

Here md stands for medium device,,you can use col-sm-6 for smaller devices and col-xs-6 for extra small devices

When you want to run an executable file from the Command prompt, (cmd.exe), or a batch file, it will:

• Search the current working directory for the executable file.
• Search all locations specified in the %PATH% environment variable for the executable file.

If the file isn't found in either of those options you will need to either:

1. Specify the location of your executable.
2. Change the working directory to that which holds the executable.
3. Add the location to %PATH% by apending it, (recommended only with extreme caution).

You can see which locations are specified in %PATH% from the Command prompt, Echo %Path%.

Because of your reported error we can assume that Mobile.exe is not in the current directory or in a location specified within the %Path% variable, so you need to use 1., 2. or 3..

Examples for 1.

C:\directory_path_without_spaces\My-App\Mobile.exe

or:

"C:\directory path with spaces\My-App\Mobile.exe"

Alternatively you may try:

Start C:\directory_path_without_spaces\My-App\Mobile.exe

or

Start "" "C:\directory path with spaces\My-App\Mobile.exe"

Where "" is an empty title, (you can optionally add a string between those doublequotes).

Examples for 2.

CD /D C:\directory_path_without_spaces\My-App
Mobile.exe

or

CD /D "C:\directory path with spaces\My-App"
Mobile.exe

You could also use the /D option with Start to change the working directory for the executable to be run by the start command

Start /D C:\directory_path_without_spaces\My-App Mobile.exe

or

Start "" /D "C:\directory path with spaces\My-App" Mobile.exe

I had the same problem. In my case it arises, because the lookup-table "country" has an existing record with countryId==0 and a primitive primary key and I try to save a User with a countryID==0. Change the primary key of country to Integer. Now Hibernate can identify new records.

For the recommendation of using wrapper classes as primary key see this stackoverflow question

I'll try to keep this short, I've done this a few months ago for a game I was trying to build, it does a UDP "Client-Server" connection that acts like TCP, you can send (message) (message + object) using this. I've done some testing with it and it works just fine, feel free to modify it if needed.

Never faced this problem before (not worked much on email, I avoid it like the plague) but you could try declaring the bullet with the unicode code point (different notation for CSS than for HTML): content: '\2022'. (you need to use the hex number, not the 8226 decimal one)

Then, in case you use something that picks up those characters and HTML-encodes them into entities (which won't work for CSS strings), I guess it will ignore that.

a is defined locally in the function, and can't be used outside the function. If you want to return a char array from the function, you'll need to allocate it dynamically:

char *a = malloc(1000);

And at some point call free on the returned pointer.

You should also see a warning at this line: char b = "blah";: you're trying to assign a string literal to a char.

Limiting the visibility of inheritance will make code not able to see that some class inherits another class: Implicit conversions from the derived to the base won't work, and static_cast from the base to the derived won't work either.

Only members/friends of a class can see private inheritance, and only members/friends and derived classes can see protected inheritance.

public inheritance

1. IS-A inheritance. A button is-a window, and anywhere where a window is needed, a button can be passed too.

   class button : public window { };
   

protected inheritance

1. Protected implemented-in-terms-of. Rarely useful. Used in boost::compressed_pair to derive from empty classes and save memory using empty base class optimization (example below doesn't use template to keep being at the point):

   struct empty_pair_impl : protected empty_class_1 
   { non_empty_class_2 second; };
   
   struct pair : private empty_pair_impl {
     non_empty_class_2 &second() {
       return this->second;
     }
   
     empty_class_1 &first() {
       return *this; // notice we return *this!
     }
   };
   

private inheritance

1. Implemented-in-terms-of. The usage of the base class is only for implementing the derived class. Useful with traits and if size matters (empty traits that only contain functions will make use of the empty base class optimization). Often containment is the better solution, though. The size for strings is critical, so it's an often seen usage here

   template<typename StorageModel>
   struct string : private StorageModel {
   public:
     void realloc() {
       // uses inherited function
       StorageModel::realloc();
     }
   };
   

public member

1. Aggregate

   class pair {
   public:
     First first;
     Second second;
   };
   

2. Accessors

   class window {
   public:
       int getWidth() const;
   };
   

protected member

1. Providing enhanced access for derived classes

   class stack {
   protected:
     vector<element> c;
   };
   
   class window {
   protected:
     void registerClass(window_descriptor w);
   };
   

private member

1. Keep implementation details

   class window {
   private:
     int width;
   };
   

Note that C-style casts purposely allows casting a derived class to a protected or private base class in a defined and safe manner and to cast into the other direction too. This should be avoided at all costs, because it can make code dependent on implementation details - but if necessary, you can make use of this technique.

For Debian distro we can override the setting via defaults

/etc/default/tomcat6

Set the JAVA_HOME pointing to the java version you want.

JAVA_HOME=/usr/lib/jvm/java-7-openjdk-amd64

I needed to print important warning about skipped tests exactly when PyTest muted literally everything.

I didn't want to fail a test to send a signal, so I did a hack as follow:

def test_2_YellAboutBrokenAndMutedTests():
    import atexit
    def report():
        print C_patch.tidy_text("""
In silent mode PyTest breaks low level stream structure I work with, so
I cannot test if my functionality work fine. I skipped corresponding tests.
Run `py.test -s` to make sure everything is tested.""")
    if sys.stdout != sys.__stdout__:
        atexit.register(report)

The atexit module allows me to print stuff after PyTest released the output streams. The output looks as follow:

============================= test session starts ==============================
platform linux2 -- Python 2.7.3, pytest-2.9.2, py-1.4.31, pluggy-0.3.1
rootdir: /media/Storage/henaro/smyth/Alchemist2-git/sources/C_patch, inifile: 
collected 15 items 

test_C_patch.py .....ssss....s.

===================== 10 passed, 5 skipped in 0.15 seconds =====================
In silent mode PyTest breaks low level stream structure I work with, so
I cannot test if my functionality work fine. I skipped corresponding tests.
Run `py.test -s` to make sure everything is tested.
~/.../sources/C_patch$

Message is printed even when PyTest is in silent mode, and is not printed if you run stuff with py.test -s, so everything is tested nicely already.

You can do:

 int[] arr = {0,1,2,3,0,1};
 string results = string.Join("",arr.Select(i => i.ToString()).ToArray());

That gives you your results.

I would recommend to use css, but php to use to set some class or id for the element, in order to make it generated dynamically.

Create a new toolbar and add the commands

• Edit.SelectionComment
• Edit.SelectionUncomment

Select your custom tookbar to show it.

You will then see the icons as mention by moriartyn

It can also be fixed by putting the correct settings.xml file into the ~/.m2/ directory.

Actually Facebook has already provided a mechanism to subscribe to authentication events.

In your case you are using "status: true" which means that FB object will request Facebook for user's login status.

FB.init({
    appId  : '<?php echo $conf['fb']['appid']; ?>',
    status : true, // check login status
    cookie : true, // enable cookies to allow the server to access the session
    xfbml  : true  // parse XFBML
});

By calling "FB.getLoginStatus()" you are running the same request again.

Instead you could use FB.Event.subscribe to subscribe to auth.statusChange or auth.authResponseChange event BEFORE you call FB.init

FB.Event.subscribe('auth.statusChange', function(response) {
    if(response.status == 'connected') {
        runFbInitCriticalCode();
    }
});

FB.init({
    appId  : '<?php echo $conf['fb']['appid']; ?>',
    status : true, // check login status
    cookie : true, // enable cookies to allow the server to access the session
    xfbml  : true  // parse XFBML
});

Most likely, when using "status: false" you can run any code right after FB.init, because there will be no asynchronous calls.

I'm not 100% sure what you're getting at since usually you will pass in your SQL queries (parameterized or not) to the JdbcTemplate, in which case you would just log those. If you have PreparedStatements and you don't know which one is being executed, the toString method should work fine. But while we're on the subject, there's a nice Jdbc logger package here which will let you automatically log your queries as well as see the bound parameters each time. Very useful. The output looks something like this:

executing PreparedStatement: 'insert into ECAL_USER_APPT
(appt_id, user_id, accepted, scheduler, id) values (?, ?, ?, ?, null)'
     with bind parameters: {1=25, 2=49, 3=1, 4=1} 

for i in iterator:
    try:
        # Do something.
        pass
    except:
        # Continue to next iteration.
        continue

Place the Utils.objectToJson(entity); call before session closing.

Or you can try to set fetch mode and play with code like this

Session s = ...
DetachedCriteria dc = DetachedCriteria.forClass(MyEntity.class).add(Expression.idEq(id));
dc.setFetchMode("innerTable", FetchMode.EAGER);
Criteria c = dc.getExecutableCriteria(s);
MyEntity a = (MyEntity)c.uniqueResult();

_ has 3 main conventional uses in Python:

1. To hold the result of the last executed expression(/statement) in an interactive interpreter session (see docs). This precedent was set by the standard CPython interpreter, and other interpreters have followed suit

2. For translation lookup in i18n (see the gettext documentation for example), as in code like

   raise forms.ValidationError(_("Please enter a correct username"))
   

3. As a general purpose "throwaway" variable name:

   1. To indicate that part of a function result is being deliberately ignored (Conceptually, it is being discarded.), as in code like:

      label, has_label, _ = text.partition(':')
      

   2. As part of a function definition (using either def or lambda), where the signature is fixed (e.g. by a callback or parent class API), but this particular function implementation doesn't need all of the parameters, as in code like:

      def callback(_):
          return True
      

      [For a long time this answer didn't list this use case, but it came up often enough, as noted here, to be worth listing explicitly.]

   This use case can conflict with the translation lookup use case, so it is necessary to avoid using _ as a throwaway variable in any code block that also uses it for i18n translation (many folks prefer a double-underscore, __, as their throwaway variable for exactly this reason).

   Linters often recognize this use case. For example year, month, day = date() will raise a lint warning if day is not used later in the code. The fix, if day is truly not needed, is to write year, month, _ = date(). Same with lambda functions, lambda arg: 1.0 creates a function requiring one argument but not using it, which will be caught by lint. The fix is to write lambda _: 1.0. An unused variable is often hiding a bug/typo (e.g. set day but use dya in the next line).

Ensure your WAMP Server (or XAMP) is working, i.e. the wamp icon should be green.

Would that work for you?

public class Main {

public static void main(String[] args) {
    Random r = new Random(System.currentTimeMillis());
    System.out.println(r.nextInt(100000) * 0.000001);
}

}

result e.g. 0.019007

My requirements included:

• must honor the dataContracts
• must deserialize dates in the format received in service
• must handle colelctions
• must target 3.5
• must NOT add an external dependency, especially not Newtonsoft (I'm creating a distributable package myself)
• must not be deserialized by hand

My solution in the end was to use SimpleJson(https://github.com/facebook-csharp-sdk/simple-json).

Although you can install it via a nuget package, I included just that single SimpleJson.cs file (with the MIT license) in my project and referenced it.

I hope this helps someone.

Why use int at all?

Apple uses int because for a loop control variable (which is only used to control the loop iterations) int datatype is fine, both in datatype size and in the values it can hold for your loop. No need for platform dependent datatype here. For a loop control variable even a 16-bit int will do most of the time.

Apple uses NSInteger for a function return value or for a function argument because in this case datatype [size] matters, because what you are doing with a function is communicating/passing data with other programs or with other pieces of code; see the answer to When should I be using NSInteger vs int? in your question itself...

they [Apple] use NSInteger (or NSUInteger) when passing a value as an argument to a function or returning a value from a function.

It is Safari specific, at least at time of writing, being introduced in Safari 9.0. From the "What's new in Safari?" documentation for Safari 9.0:

Viewport Changes

Viewport meta tags using "width=device-width" cause the page to scale down to fit content that overflows the viewport bounds. You can override this behavior by adding "shrink-to-fit=no" to your meta tag as shown below. The added value will prevent the page from scaling to fit the viewport.

<meta name="viewport" content="width=device-width, initial-scale=1.0, shrink-to-fit=no">

In short, adding this to the viewport meta tag restores pre-Safari 9.0 behaviour.

Example

Here's a worked visual example which shows the difference upon loading the page in the two configurations.

The red section is the width of the viewport and the blue section is positioned outside the initial viewport (eg left: 100vw). Note how in the first example the page is zoomed to fit when shrink-to-fit=no is omitted (thus showing the out-of-viewport content) and the blue content remains off screen in the latter example.

The code for this example can be found at https://codepen.io/davidjb/pen/ENGqpv.

Without shrink-to-fit specified

With shrink-to-fit=no

Use this one:

ArrayList<String> x = new ArrayList(Arrays.asList("abc", "mno"));

I did it this way: Just add the event to any control, set the control's tag, and add a conditional to handle the tooltip for the appropriate control/tag.

private void Info_MouseHover(object sender, EventArgs e)
{
    Control senderObject = sender as Control;
    string hoveredControl = senderObject.Tag.ToString();

    // only instantiate a tooltip if the control's tag contains data
    if (hoveredControl != "")
    {
        ToolTip info = new ToolTip
        {
            AutomaticDelay = 500
        };

        string tooltipMessage = string.Empty;

        // add all conditionals here to modify message based on the tag 
        // of the hovered control
        if (hoveredControl == "save button")
        {
            tooltipMessage = "This button will save stuff.";
        }

        info.SetToolTip(senderObject, tooltipMessage);
    }
}

long startTime = System.currentTimeMillis();
// code goes here
long finishTime = System.currentTimeMillis();
long elapsedTime = finishTime - startTime; // elapsed time in milliseconds

Is there any difference?

Yes. A Timeout executes a certain amount of time after setTimeout() is called; an Interval executes a certain amount of time after the previous interval fired.

You will notice the difference if your doStuff() function takes a while to execute. For example, if we represent a call to setTimeout/setInterval with ., a firing of the timeout/interval with * and JavaScript code execution with [-----], the timelines look like:

Timeout:

.    *  .    *  .    *  .    *  .
     [--]    [--]    [--]    [--]

Interval:

.    *    *    *    *    *    *
     [--] [--] [--] [--] [--] [--]

The next complication is if an interval fires whilst JavaScript is already busy doing something (such as handling a previous interval). In this case, the interval is remembered, and happens as soon as the previous handler finishes and returns control to the browser. So for example for a doStuff() process that is sometimes short ([-]) and sometimes long ([-----]):

.    *    *    •    *    •    *    *
     [-]  [-----][-][-----][-][-]  [-]

• represents an interval firing that couldn't execute its code straight away, and was made pending instead.

So intervals try to ‘catch up’ to get back on schedule. But, they don't queue one on top of each other: there can only ever be one execution pending per interval. (If they all queued up, the browser would be left with an ever-expanding list of outstanding executions!)

.    *    •    •    x    •    •    x
     [------][------][------][------]

x represents an interval firing that couldn't execute or be made pending, so instead was discarded.

If your doStuff() function habitually takes longer to execute than the interval that is set for it, the browser will eat 100% CPU trying to service it, and may become less responsive.

Which do you use and why?

Chained-Timeout gives a guaranteed slot of free time to the browser; Interval tries to ensure the function it is running executes as close as possible to its scheduled times, at the expense of browser UI availability.

I would consider an interval for one-off animations I wanted to be as smooth as possible, whilst chained timeouts are more polite for ongoing animations that would take place all the time whilst the page is loaded. For less demanding uses (such as a trivial updater firing every 30 seconds or something), you can safely use either.

In terms of browser compatibility, setTimeout predates setInterval, but all browsers you will meet today support both. The last straggler for many years was IE Mobile in WinMo <6.5, but hopefully that too is now behind us.

Are there any Windows-based collaborators on your project?

Because if there are, the Git-for-Windows GUI seems awkward, difficult, unfriendly.

Mercurial-on-Windows, by contrast, is a no-brainer.

Yes, it is possible.

try:
   ...
except FirstException:
   handle_first_one()

except SecondException:
   handle_second_one()

except (ThirdException, FourthException, FifthException) as e:
   handle_either_of_3rd_4th_or_5th()

except Exception:
   handle_all_other_exceptions()

See: http://docs.python.org/tutorial/errors.html

The "as" keyword is used to assign the error to a variable so that the error can be investigated more thoroughly later on in the code. Also note that the parentheses for the triple exception case are needed in python 3. This page has more info: Catch multiple exceptions in one line (except block)

You can like this...

document.getElementById('my-image').ondragstart = function() { return false; };

See it working (or not working, rather)

It seems you are using jQuery.

$('img').on('dragstart', function(event) { event.preventDefault(); });

You need to declare disconnectFunc as a function pointer, not a void pointer. You also need to call it as a function (with parentheses), and no "*" is needed.

There are multiple ways of applying aggregate functions to multiple columns.

GroupedData class provides a number of methods for the most common functions, including count, max, min, mean and sum, which can be used directly as follows:

• Python:

  df = sqlContext.createDataFrame(
      [(1.0, 0.3, 1.0), (1.0, 0.5, 0.0), (-1.0, 0.6, 0.5), (-1.0, 5.6, 0.2)],
      ("col1", "col2", "col3"))
  
  df.groupBy("col1").sum()
  
  ## +----+---------+-----------------+---------+
  ## |col1|sum(col1)|        sum(col2)|sum(col3)|
  ## +----+---------+-----------------+---------+
  ## | 1.0|      2.0|              0.8|      1.0|
  ## |-1.0|     -2.0|6.199999999999999|      0.7|
  ## +----+---------+-----------------+---------+
  

• Scala

  val df = sc.parallelize(Seq(
    (1.0, 0.3, 1.0), (1.0, 0.5, 0.0),
    (-1.0, 0.6, 0.5), (-1.0, 5.6, 0.2))
  ).toDF("col1", "col2", "col3")
  
  df.groupBy($"col1").min().show
  
  // +----+---------+---------+---------+
  // |col1|min(col1)|min(col2)|min(col3)|
  // +----+---------+---------+---------+
  // | 1.0|      1.0|      0.3|      0.0|
  // |-1.0|     -1.0|      0.6|      0.2|
  // +----+---------+---------+---------+
  

Optionally you can pass a list of columns which should be aggregated

df.groupBy("col1").sum("col2", "col3")

You can also pass dictionary / map with columns a the keys and functions as the values:

• Python

  exprs = {x: "sum" for x in df.columns}
  df.groupBy("col1").agg(exprs).show()
  
  ## +----+---------+
  ## |col1|avg(col3)|
  ## +----+---------+
  ## | 1.0|      0.5|
  ## |-1.0|     0.35|
  ## +----+---------+
  

• Scala

  val exprs = df.columns.map((_ -> "mean")).toMap
  df.groupBy($"col1").agg(exprs).show()
  
  // +----+---------+------------------+---------+
  // |col1|avg(col1)|         avg(col2)|avg(col3)|
  // +----+---------+------------------+---------+
  // | 1.0|      1.0|               0.4|      0.5|
  // |-1.0|     -1.0|3.0999999999999996|     0.35|
  // +----+---------+------------------+---------+
  

Finally you can use varargs:

• Python

  from pyspark.sql.functions import min
  
  exprs = [min(x) for x in df.columns]
  df.groupBy("col1").agg(*exprs).show()
  

• Scala

  import org.apache.spark.sql.functions.sum
  
  val exprs = df.columns.map(sum(_))
  df.groupBy($"col1").agg(exprs.head, exprs.tail: _*)
  

There are some other way to achieve a similar effect but these should more than enough most of the time.

See also:

• Multiple Aggregate operations on the same column of a spark dataframe

The following will do it:

which(colnames(df)=="B")

Short version: Yes it is faster, with less code!

String concatenation does a lot of work without knowing if it is needed or not (the traditional "is debugging enabled" test known from log4j), and should be avoided if possible, as the {} allows delaying the toString() call and string construction to after it has been decided if the event needs capturing or not. By having the logger format a single string the code becomes cleaner in my opinion.

You can provide any number of arguments. Note that if you use an old version of sljf4j and you have more than two arguments to {}, you must use the new Object[]{a,b,c,d} syntax to pass an array instead. See e.g. http://slf4j.org/apidocs/org/slf4j/Logger.html#debug(java.lang.String, java.lang.Object[]).

Regarding the speed: Ceki posted a benchmark a while back on one of the lists.

On your DBA account, give USERB the right to create a procedure using grant grant create any procedure to USERB

The procedure will look

CREATE OR REPLACE PROCEDURE USERB.USERB_PROCEDURE
--Must add the line below
AUTHID CURRENT_USER AS
  BEGIN
  --DO SOMETHING HERE
  END
END

GRANT EXECUTE ON USERB.USERB_PROCEDURE TO USERA

I know this is a very old question but I am hoping I could chip it a bit.

Here is an example

#!/bin/bash

default='default_value'
value=${1:-$default}

echo "value: [$value]"

save this as script.sh and make it executable. run it without params

./script.sh
> value: [default_value]

run it with param

./script.sh my_value
> value: [my_value]

I have 2 servers setup on docker, reverse proxy & web server. This error started happening for all my websites all of a sudden after 1 year. When setting up earlier, I generated a self signed certificate on the web server.

So, I had to generate the SSL certificate again and it started working...

openssl req -x509 -nodes -days 365 -newkey rsa:2048 -keyout ssl.key -out ssl.crt

See to enable clustering:

pm2 start npm --name "AppName" -i 0 -- run start

What do you think?

The simplest concept to understand, although maybe not the best, is you have three files changed and you want to stash one file.

If you do git stash to stash them all, git stash apply to bring them back again and then git checkout f.c on the file in question to effectively reset it.

When you want to unstash that file run do a git reset --hard and then run git stash apply again, taking advantage ofthe fact that git stash apply doesn't clear the diff from the stash stack.

For a dynamic approach, if your labels are always in front of your text areas:

$(object).prev("label").text(charsleft);

I'd like to demonstrate that if you convert to .Date that you don't need to worry about hours/mins/seconds etc:

    [Test]
    public void ConvertToDateWillHaveTwoDatesEqual()
    {
        DateTime d1 = new DateTime(2008, 1, 1);
        DateTime d2 = new DateTime(2008, 1, 2);
        Assert.IsTrue(d1 < d2);

        DateTime d3 = new DateTime(2008, 1, 1,7,0,0);
        DateTime d4 = new DateTime(2008, 1, 1,10,0,0);
        Assert.IsTrue(d3 < d4);
        Assert.IsFalse(d3.Date < d4.Date);
    }

How about using FONT tag?

Like:

H<font color="red">E</font>LLO.

Can't show example here, because this site doesn't allow font tag use.

Span style is fast and easy too.

 instance.__class__.__name__

example:

>>> class A():
    pass
>>> a = A()
>>> a.__class__.__name__
'A'

DHT nodes have unique identifiers, termed, Node ID. Node IDs are chosen at random from the same 160-bit space as BitTorrent info-hashes. Closeness is measured by comparing Node ID's routing tables, the closer the Node, the more detailed, resulting in optimal

What then makes them more optimal than it's predecessor "Kademlia" which used simple unsigned integers: distance(A,B) = |A xor B| Smaller values are closer. XOR. Besides not being secure, its logic was flawed.

If your client supports DHT, there are 8-bytes reserved in which contains 0x09 followed by a 2-byte payload with the UDP Port and DHT node. If the handshake is successful the above will continue.

SELECT  *
FROM    (
        SELECT  *
        FROM    users
        WHERE   1
        ORDER BY
                rand()
        LIMIT 20
        ) q
ORDER BY
        name

The closest thing C does to "computing p" in a way that's directly visible to applications is acos(-1) or similar. This is almost always done with polynomial/rational approximations for the function being computed (either in C, or by the FPU microcode).

However, an interesting issue is that computing the trigonometric functions (sin, cos, and tan) requires reduction of their argument modulo 2p. Since 2p is not a diadic rational (and not even rational), it cannot be represented in any floating point type, and thus using any approximation of the value will result in catastrophic error accumulation for large arguments (e.g. if x is 1e12, and 2*M_PI differs from 2p by e, then fmod(x,2*M_PI) differs from the correct value of 2p by up to 1e12*e/p times the correct value of x mod 2p. That is to say, it's completely meaningless.

A correct implementation of C's standard math library simply has a gigantic very-high-precision representation of p hard coded in its source to deal with the issue of correct argument reduction (and uses some fancy tricks to make it not-quite-so-gigantic). This is how most/all C versions of the sin/cos/tan functions work. However, certain implementations (like glibc) are known to use assembly implementations on some cpus (like x86) and don't perform correct argument reduction, leading to completely nonsensical outputs. (Incidentally, the incorrect asm usually runs about the same speed as the correct C code for small arguments.)

.button{
    background-image:url('/image/btn.png');
    background-repeat:no-repeat;
}

Read about using docstrings in your Python code.

As per the Python docstring conventions:

The docstring for a function or method should summarize its behavior and document its arguments, return value(s), side effects, exceptions raised, and restrictions on when it can be called (all if applicable). Optional arguments should be indicated. It should be documented whether keyword arguments are part of the interface.

There will be no golden rule, but rather provide comments that mean something to the other developers on your team (if you have one) or even to yourself when you come back to it six months down the road.

Note that all of the stringstream methods may involve locking around the use of the locale object for formatting. This may be something to be wary of if you're using this conversion from multiple threads...

See here for more. Convert a number to a string with specified length in C++

It is Purely swift notation an working for me

func tableView(tableView: UITableView, cellForRowAtIndexPath indexPath: NSIndexPath) -> UITableViewCell
    {
        var cellIdentifier:String = "CustomFields"
        var cell:CustomCell? = tableView.dequeueReusableCellWithIdentifier(cellIdentifier) as? CustomCell
        if (cell == nil)
        {
            var nib:Array = NSBundle.mainBundle().loadNibNamed("CustomCell", owner: self, options: nil)
            cell = nib[0] as? CustomCell
        }
        return cell!
    }

You want to do something like this instead:

<Button>
    <StackPanel>
        <Image Source="Pictures/apple.jpg" />
        <TextBlock>Disconnect from Server</TextBlock>
    </StackPanel>
</Button>

If you are using NodeJs for your server side, just add these to your route and you will be Ok

     res.header("Access-Control-Allow-Origin", "*");
     res.header("Access-Control-Allow-Headers", "Origin, X-Requested-With, Content-Type, Accept");

Your route will then look somehow like this

    router.post('/odin', function(req, res, next) {
      res.header("Access-Control-Allow-Origin", "*");
      res.header("Access-Control-Allow-Headers", "Origin, X-Requested-With, Content-Type, Accept");


    return res.json({Name: req.body.name, Phone: req.body.phone});
});

Client side for Ajax call

 var sendingData = {
   name: "Odinfono Emmanuel",
   phone: "1234567890"
}

<script>
  $(document).ready(function(){

    $.ajax({
        url: 'http://127.0.0.1:3000/odin',            
        method: 'POST',
        type: 'json',
        data: sendingData,
        success: function (response) {
            console.log(response);
        },
        error: function (error) {
            console.log(error);
        }
        });
    });
</script>

You should have something like this in your browser console as response

{ name: "Odinfono Emmanuel", phone: "1234567890"}

Enjoy coding....

You can add security provider by editing java.security with using following code with creating static block:

static {
    Security.addProvider(new BouncyCastleProvider());
}

If you are using maven project, then you will have to add dependency for BouncyCastleProvider as follows in pom.xml file of your project.

<dependency>
            <groupId>org.bouncycastle</groupId>
            <artifactId>bcprov-jdk15on</artifactId>
            <version>1.47</version>
</dependency>

If you are using normal java project, then you can add download bcprov-jdk15on-147.jar from the link given below and edit your classpath.

http://www.java2s.com/Code/Jar/b/Downloadbcprovextjdk15on147jar.htm

Additional Reason to use Foreign Keys: - Allows greater reuse of a database

Additional Reason to NOT use Foreign Keys: - You are trying to lock-in a customer into your tool by reducing reuse.

console.log().

Chrome, Safari, and IE 8+ come with built-in consoles (as part of a larger set of development tools). If you're using Firefox, getfirebug.com.

I use below codes for the exit of Tkinter window:

from tkinter import*
root=Tk()
root.bind("<Escape>",lambda q:root.destroy())
root.mainloop()

or

from tkinter import*
root=Tk()
Button(root,text="exit",command=root.destroy).pack()
root.mainloop()

or

from tkinter import*
root=Tk()
Button(root,text="quit",command=quit).pack()
root.mainloop()

or

from tkinter import*
root=Tk()
Button(root,text="exit",command=exit).pack()
root.mainloop()

Python 3

from urllib.error import HTTPError

Python 2

from urllib2 import HTTPError

Just catch HTTPError, handle it, and if it's not Error 404, simply use raise to re-raise the exception.

See the Python tutorial.

e.g. complete example for Pyhton 2

import urllib2
from urllib2 import HTTPError
try:
   urllib2.urlopen("some url")
except HTTPError as err:
   if err.code == 404:
       <whatever>
   else:
       raise

When you use Angular, try not to use the jquery library. Try using the features and the libraries that are produced for angular framework. If you want to use the jquery functions like find(), html(), closest() and etc.., I suggest using the pure js. example: querySelector(), innerHTML, parentElement and etc...

Actually, I believe this would be the fastest:

SELECT ProductID, ProductName 
    FROM Northwind..Products p  
          outer join Northwind..[Order Details] od on p.ProductId = od.ProductId)
WHERE od.ProductId is null

This is a basic example of an object "Article" with getters and setters:

  public class Article
    {

        public String title;
        public String link;
        public String description;

        public string getTitle()
        {
            return title;
        }

        public void setTitle(string value)
        {
            title = value;
        }

        public string getLink()
        {
            return link;
        }

        public void setLink(string value)
        {
            link = value;
        }
        public string getDescription()
        {
            return description;
        }

        public void setDescription(string value)
        {
            description = value;
        }
    }

You have a single quotes conflict, so use:

 echo "A,B,C" | sed "s/,/','/g"

If using bash, you can do too (<<< is a here-string):

sed "s/,/','/g" <<< "A,B,C"

but not

sed "s/,/','/g"  "A,B,C"

because sed expect file(s) as argument(s)

EDIT:

if you use ksh or any other ones :

echo string | sed ...

In my case nothing above worked untill I called requestFocus() AFTER my constructor has returned.

MyPanel panel = new MyPanel(...);
frame.add(panel);
panel.initFocus();

MyPanel.initFocus() would have:

myTextField.requestFocus();

And it works.

This function will round either be order of magnitude (right to left) or by digits the same way that format treats floating point decimal places (left to right:

def intround(n, p):
    ''' rounds an intger. if "p"<0, p is a exponent of 10; if p>0, left to right digits '''
    if p==0: return n
    if p>0:  
        ln=len(str(n))  
        p=p-ln+1 if n<0 else p-ln
    return (n + 5 * 10**(-p-1)) // 10**-p * 10**-p

>>> tgt=5555555
>>> d=2
>>> print('\t{} rounded to {} places:\n\t{} right to left \n\t{} left to right'.format(
        tgt,d,intround(tgt,-d), intround(tgt,d))) 

Prints

5555555 rounded to 2 places:
5555600 right to left 
5600000 left to right

You can also use Decimal class:

import decimal
import sys

def ri(i, prec=6):
    ic=long if sys.version_info.major<3 else int
    with decimal.localcontext() as lct:
        if prec>0:
            lct.prec=prec
        else:
            lct.prec=len(str(decimal.Decimal(i)))+prec  
        n=ic(decimal.Decimal(i)+decimal.Decimal('0'))
    return n

On Python 3 you can reliably use round with negative places and get a rounded integer:

def intround2(n, p):
    ''' will fail with larger floating point numbers on Py2 and require a cast to an int '''
    if p>0:
        return round(n, p-len(str(n))+1)
    else:
        return round(n, p)    

On Python 2, round will fail to return a proper rounder integer on larger numbers because round always returns a float:

>>> round(2**34, -5)
17179900000.0                     # OK
>>> round(2**64, -5)
1.84467440737096e+19              # wrong 

The other 2 functions work on Python 2 and 3

I think this is the best way:

this.stops.stream().filter(s -> Objects.equals(s.getStation().getName(), this.name)).findFirst().orElse(null);

Using the data points from the accepted answer you can use polynomial interpolation to obtain a formula.

WolframAlpha Input: interpolating polynomial {{1,.63},{2,.82}, {3,1}, {4,1.13}, {5,1.5}, {6, 2}, {7,3}}

Formula: 0.00223611x^6 - 0.0530417x^5 + 0.496319x^4 - 2.30479x^3 + 5.51644x^2 - 6.16717x + 3.14

And use in Groovy code:

import java.math.*
def convert = {x -> (0.00223611*x**6 - 0.053042*x**5 + 0.49632*x**4 - 2.30479*x**3 + 5.5164*x**2 - 6.167*x + 3.14).setScale(2, RoundingMode.HALF_UP) }
(1..7).each { i -> println(convert(i)) }

Thread.interrupt() method sets internal 'interrupt status' flag. Usually that flag is checked by Thread.interrupted() method.

By convention, any method that exists via InterruptedException have to clear interrupt status flag.

Edit #3:

The Navigation Drawer pattern is officially described in the Android documentation!

Check out the following links:

• Design docs can be found here.
• Developer docs can be found here.

Edit #2:

Roman Nurik (an Android design engineer at Google) has confirmed that the recommended behavior is to not move the Action Bar when opening the drawer (like the YouTube app). See this Google+ post.

Edit #1:

I answered this question a while ago, but I'm back to re-emphasize that Prixing has the best fly-out menu out there... by far. It's absolutely beautiful, perfectly smooth, and it puts Facebook, Google+, and YouTube to shame. EverNote is pretty good too... but still not as perfect as Prixing. Check out this series of posts on how the flyout menu was implemented (from none other than the head developer at Prixing himself!).

Original Answer:

Adam Powell and Richard Fulcher talk about this at 49:47 - 52:50 in the Google I/O talk titled "Navigation in Android".

To summarize their answer, as of the date of this posting the slide out navigation menu is not officially part of the Android application design standard. As you have probably discovered, there's currently no native support for this feature, but there was talk about making this an addition to an upcoming revision of the support package.

With regards to the YouTube and G+ apps, it does seem odd that they behave differently. My best guess is that the reason the YouTube app fixes the position of the action bar is,

1. One of the most important navigational options for users using the YouTube app is search, which is performed in the SearchView in the action bar. It would make sense to make the action bar static in this regard, since it would allow the user to always have the option to search for new videos.

2. The G+ app uses a ViewPager to display its content, so making the pull out menu specific to the layout content (i.e. everything under the action bar) wouldn't make much sense. Swiping is supposed to provide a means of navigating between pages, not a means of global navigation. This might be why they decided to do it differently in the G+ app than they did in the YouTube app.

   On another note, check out the Google Play app for another version of the "pull out menu" (when you are at the left most page, swipe left and a pull out, "half-page" menu will appear).

You're right in that this isn't very consistent behavior, but it doesn't seem like there is a 100% consensus within the Android team on how this behavior should be implemented yet. I wouldn't be surprised if in the future the apps are updated so that the navigation in both apps are identical (they seemed very keen on making navigation consistent across all Google-made apps in the talk).

take look at this example

class Person
{
    public int ID { get; set; }
    public string FirstName { get; set; }
    public string LastName { get; set; }
    public string Phone { get; set; }
}

class Pet
{
    public string Name { get; set; }
    public Person Owner { get; set; }
}

public static void LeftOuterJoinExample()
{
    Person magnus = new Person {ID = 1, FirstName = "Magnus", LastName = "Hedlund"};
    Person terry = new Person {ID = 2, FirstName = "Terry", LastName = "Adams"};
    Person charlotte = new Person {ID = 3, FirstName = "Charlotte", LastName = "Weiss"};
    Person arlene = new Person {ID = 4, FirstName = "Arlene", LastName = "Huff"};

    Pet barley = new Pet {Name = "Barley", Owner = terry};
    Pet boots = new Pet {Name = "Boots", Owner = terry};
    Pet whiskers = new Pet {Name = "Whiskers", Owner = charlotte};
    Pet bluemoon = new Pet {Name = "Blue Moon", Owner = terry};
    Pet daisy = new Pet {Name = "Daisy", Owner = magnus};

    // Create two lists.
    List<Person> people = new List<Person> {magnus, terry, charlotte, arlene};
    List<Pet> pets = new List<Pet> {barley, boots, whiskers, bluemoon, daisy};

    var query = from person in people
        where person.ID == 4
        join pet in pets on person equals pet.Owner  into personpets
        from petOrNull in personpets.DefaultIfEmpty()
        select new { Person=person, Pet = petOrNull}; 



    foreach (var v in query )
    {
        Console.WriteLine("{0,-15}{1}", v.Person.FirstName + ":", (v.Pet == null ? "Does not Exist" : v.Pet.Name));
    }
}

// This code produces the following output:
//
// Magnus:        Daisy
// Terry:         Barley
// Terry:         Boots
// Terry:         Blue Moon
// Charlotte:     Whiskers
// Arlene:

now you are able to include elements from the left even if that element has no matches in the right, in our case we retrived Arlene even he has no matching in the right

here is the reference

How to: Perform Left Outer Joins (C# Programming Guide)

Here is a very simple answer to this(only one line).

You can do that after you added the 'n' column into your df as follows.

import pandas as pd
df = pd.DataFrame({'l':['a','b','c','d'], 'v':[1,2,1,2]})
df['n'] = 0

df
    l   v   n
0   a   1   0
1   b   2   0
2   c   1   0
3   d   2   0

# here you can add the below code and it should work.
df = df[list('nlv')]
df

    n   l   v
0   0   a   1
1   0   b   2
2   0   c   1
3   0   d   2



However, if you have words in your columns names instead of letters. It should include two brackets around your column names. 

import pandas as pd
df = pd.DataFrame({'Upper':['a','b','c','d'], 'Lower':[1,2,1,2]})
df['Net'] = 0
df['Mid'] = 2
df['Zsore'] = 2

df

    Upper   Lower   Net Mid Zsore
0   a       1       0   2   2
1   b       2       0   2   2
2   c       1       0   2   2
3   d       2       0   2   2

# here you can add below line and it should work 
df = df[list(('Mid','Upper', 'Lower', 'Net','Zsore'))]
df

   Mid  Upper   Lower   Net Zsore
0   2   a       1       0   2
1   2   b       2       0   2
2   2   c       1       0   2
3   2   d       2       0   2

In the new Pipeline flow, following image may help ..

Use the ALLOW_PAGE_LOCKS clause of ALTER/CREATE INDEX:

ALTER INDEX indexname ON tablename SET (ALLOW_PAGE_LOCKS = OFF);

pygame is not distributed via pip. See this link which provides windows binaries ready for installation.

1. Install python
2. Make sure you have python on your PATH
3. Download the appropriate wheel from this link
4. Install pip using this tutorial

5. Finally, use these commands to install pygame wheel with pip

   • Python 2 (usually called pip)

     • pip install file.whl

   • Python 3 (usually called pip3)

     • pip3 install file.whl

Another tutorial for installing pygame for windows can be found here. Although the instructions are for 64bit windows, it can still be applied to 32bit

Look at the link, there is an answer for your question.

Sending Email in Android using JavaMail API without using the default/built-in app

String dt = Date.Now.ToString("yyyy-MM-dd");

Now you got this for dt, 2010-09-09

Yes, that is safe and recommended.

The only caveat from the page you referred is that you can't be modifying configuration of the mapper once it is shared; but you are not changing configuration so that is fine. If you did need to change configuration, you would do that from the static block and it would be fine as well.

EDIT: (2013/10)

With 2.0 and above, above can be augmented by noting that there is an even better way: use ObjectWriter and ObjectReader objects, which can be constructed by ObjectMapper. They are fully immutable, thread-safe, meaning that it is not even theoretically possible to cause thread-safety issues (which can occur with ObjectMapper if code tries to re-configure instance).

You can use a tool I wrote that bypasses the limit.

It saves the Tweets in a JSON format.

https://github.com/pauldotknopf/twitter-dump

Personally, I got around this in a slightly different way - I had a pivot table querying an SQL server source and I was using the timeline slicer to restrict the results to a date range - I then wanted to summarise the pivot results in another table.

I selected the 'source' pivot table and created a named range called 'SourcePivotData'.

Create your summary pivot tables using the named range as a source.

In the worksheet events for the source pivot table, I put the following code:

Private Sub Worksheet_PivotTableUpdate(ByVal Target As PivotTable)

'Update the address of the named range
ThisWorkbook.Names("SourcePivotData").RefersTo = "='" & Target.TableRange1.Worksheet.Name & "'!" & Target.TableRange1.AddressLocal

'Refresh any pivot tables that use this as a source
Dim pt As PivotTable
Application.DisplayAlerts = False
For Each pt In Sheet2.PivotTables
    pt.PivotCache.Refresh
Next pt
Application.DisplayAlerts = True

End Sub

Works nicely for me! :)

"Web Page Editor (optional)" package from the Eclipse Galileo/Helios update site has the following very minor quirks in a JSP editor:

• Auto-commenting in Java code fragments does not work (Ctrl /); [fixed in Helios SR2]
• [present in Galileo, fixed in Eclipse Helios SR1] If a Java code fragment has errors that are already fixed, the editor does not remove the error marks until you modify the erroneous place or close/reopen the file being edited;

This was valid at Dec 7, 2010.

I recently had a similar problem and I found that I need to decrease the list index by one.

So instead of:

if l[i]==0:

You can try:

if l[i-1]==0:

Because the list indices start at 0 and your range will go just one above that.

To return a value when using try/catch you can use a temporary variable, e.g.

public static double add(String[] values) {
    double sum = 0.0;
    try {
        int length = values.length;
        double arrayValues[] = new double[length];
        for(int i = 0; i < length; i++) {
            arrayValues[i] = Double.parseDouble(values[i]);
            sum += arrayValues[i];
        }
    } catch(NumberFormatException e) {
        e.printStackTrace();
    } catch(RangeException e) {
        throw e;
    } finally {
        System.out.println("Thank you for using the program!");
    }
    return sum;
}

Else you need to have a return in every execution path (try block or catch block) that has no throw.

Putting an answer , as my reputation aint enough to comment. But dont look at this as an answer, just a additional info, as myself, had some problems with both footer, and positioning.

When setting up the page, so that my footer always stays at the bottom, with position absolute, and main container/wrapper with relative position.

I then found some issues with my text content, and a menu inside the same content(white part of page between header and footer), when setting these to absolute, footer no longer stays down.

Postitioning is, as you say a complex theme.

My solution, to the content I wanted in 'absolute' positon in my webpage, and not be pushed to the side, when in example opening a drop down menu, was to actually give it postition relative, and putting it 35em below my drop down menu. (35em is the heigth of my dropdown menu, when fully extended)

Then, Top:-35em, for the content that before was pushed to the side. And then adding margin-bottom:-35em. This way, the content is "below" my drop down menu, but visually it is side by side with my drop down menu! And the white space below down to the footer, is with only 10em margin, as it was before starting to play around with this. So my solution to this was like this :

 html, body {
    margin:0;
    padding:0;
    height:100%;

}
h1 {
    margin:0;
}
    #webpage {
    position:relative;
    min-height:100%;
    margin:0;
    overflow:auto;
}
     #header {
    height:5em;
    width:100%;
    padding:0;
    margin:0;
}
     #text {
    position:relative;
   margin-bottom:-32em;
    padding-top:2em;
    padding-right:2em;
    padding-bottom:10em;
    background-repeat:no-repeat;
    width:70%;
    padding-left:auto;
    margin-left:auto;
    margin-right:auto;
    right:10em;
    float:right;
    top:-32em;
      }
#dropdown {

position:absolute;
    left:0;
    width:20%;
    clear:both;
    display:block;
    position:relative;
    top:1em;
    height:35em;

}
    #footer {
    position:absolute;
    width:100%;
    right:0;
    bottom:0;
    height:5em;
    margin:0;
     margin-top:5em;
}

I see your question is answered good, but after alot of troubleing I found this to be a very good solution, and a way to understand better how positioning works.. When I place my text content, below my drop down menu, it doesn't push my text to the side. If I changed the text to position absolute, the footer did not stay in place. As I can believe this is an issue for more people then me, I add this here. What in fact happends, is I put the text, 35ems, below my drop down.

Then, I visually put it right next to eachother, with relative position, and top:-35em;, and evening out the huge space below, with margin:-35em;

negative values are underestimated at times, very good functionality, when one understands these positions better!

Natually, fixed position, also seemed logic for my footer, but I do really want the footer to go below the viewport, if the text, or content, is longer than the viewport. And to stay at the bottom, if there is little content on the page.

This setupp fixed that very nicely, and remember to use 'em', not 'px' for a more fluid/dynamic page layout! :)

(there may be better solutions, but this works for me cross platforms, as well as devices).

String a = new String("foo");
String b = new String("foo");
System.out.println(a == b); // prints false
System.out.println(a.equals(b)); // prints true

Make sure you understand why. It's because the == comparison only compares references; the equals() method does a character-by-character comparison of the contents.

When you call new for a and b, each one gets a new reference that points to the "foo" in the string table. The references are different, but the content is the same.

In my case, the issue was that I was running two other SQL Server instances which were (or at least one of them was) causing a conflict.

The solution was simply to stop the other SQL Server instance and its accompanying SQL Server Agent.

While I'm at it, I'll also recommend making sure Named Pipes is enabled in your server's protocol settings

This works for me:

File file = ...;
byte[] data = new byte[(int) file.length()];
try {
    new FileInputStream(file).read(data);
} catch (Exception e) {
    e.printStackTrace();
}

This will definitely work. Orange outline won't show up anymore.. Common for all tags:

*:focus {
    outline: none;
   }

Specific to some tag, ex: input tag

input:focus{
   outline:none;
  }

There are various ways in which you can declare an array in Java:

float floatArray[]; // Initialize later
int[] integerArray = new int[10];
String[] array = new String[] {"a", "b"};

You can find more information in the Sun tutorial site and the JavaDoc.

My most preferred way is,

var objectKeysArray = Object.keys(yourJsonObj)
objectKeysArray.forEach(function(objKey) {
    var objValue = yourJsonObj[objKey]
})

Here is simple sample from android developer.

Basically, you can write a file in the internal storage like this :

String FILENAME = "hello_file";
String string = "hello world!";

FileOutputStream fos = openFileOutput(FILENAME, Context.MODE_PRIVATE);
fos.write(string.getBytes());
fos.close();

No you don't need to call the base destructor, a base destructor is always called for you by the derived destructor. Please see my related answer here for order of destruction.

To understand why you want a virtual destructor in the base class, please see the code below:

class B
{
public:
    virtual ~B()
    {
        cout<<"B destructor"<<endl;
    }
};


class D : public B
{
public:
    virtual ~D()
    {
        cout<<"D destructor"<<endl;
    }
};

When you do:

B *pD = new D();
delete pD;

Then if you did not have a virtual destructor in B, only ~B() would be called. But since you have a virtual destructor, first ~D() will be called, then ~B().

This is from the iOS Text Programming Guide published by Apple here: https://developer.apple.com/library/ios/documentation/StringsTextFonts/Conceptual/TextAndWebiPhoneOS/KeyboardManagement/KeyboardManagement.html

Basically call "registerForKeyBoardNotifications" in your ViewDidLoad. Then every time the keyboard becomes active, "keyboardWasShown" is called. And every time the keyboard disappears, "keyboardWillBeHidden" is called.

// Call this method somewhere in your view controller setup code.
- (void)registerForKeyboardNotifications {
    [[NSNotificationCenter defaultCenter] addObserver:self selector:@selector(keyboardWasShown:) name:UIKeyboardDidShowNotification object:nil];
    [[NSNotificationCenter defaultCenter] addObserver:self selector:@selector(keyboardWillBeHidden:) name:UIKeyboardWillHideNotification object:nil];
}

// Called when the UIKeyboardDidShowNotification is sent.
- (void)keyboardWasShown:(NSNotification*)aNotification {
    NSLog(@"Keyboard is active.");
    NSDictionary* info = [aNotification userInfo];
    CGSize kbSize = [[info objectForKey:UIKeyboardFrameBeginUserInfoKey] CGRectValue].size;

    UIEdgeInsets contentInsets = UIEdgeInsetsMake(0.0, 0.0, kbSize.height, 0.0);
    scrollView.contentInset = contentInsets;
    scrollView.scrollIndicatorInsets = contentInsets;

    // If active text field is hidden by keyboard, scroll it so it's visible
    // Your app might not need or want this behavior.
    CGRect aRect = self.view.frame;
    aRect.size.height -= kbSize.height;
    if (!CGRectContainsPoint(aRect, activeField.frame.origin) ) {
        [self.scrollView scrollRectToVisible:activeField.frame animated:YES];
    }
}

// Called when the UIKeyboardWillHideNotification is sent
- (void)keyboardWillBeHidden:(NSNotification*)aNotification {
    NSLog(@"Keyboard is hidden");
    UIEdgeInsets contentInsets = UIEdgeInsetsZero;
    scrollView.contentInset = contentInsets;
    scrollView.scrollIndicatorInsets = contentInsets;
}

try this:

.test {
    position:absolute;
    background:blue;
    width:200px;
    height:200px;
    top:40px;
    transition:left 1s linear;
    left: 0;
}

it can be helpful

public static int vCodeApk(String path) {
    PackageManager pm = G.context.getPackageManager();
    PackageInfo info = pm.getPackageArchiveInfo(path, 0);
    return info.versionCode;
    //        Toast.makeText(this, "VersionCode : " + info.versionCode + ", VersionName : " + info.versionName, Toast.LENGTH_LONG).show();
}

G is my Application class :

public class G extends Application {

The Linux kernel is mostly written in C (and a bit of assembly language, I'd imagine), but some of the important userspace utilities (programs) are shell scripts written in the Bash scripting language. Beyond that, it's sort of hard to define "Linux" since you basically build a Linux system by picking bits and pieces you want and putting them together, and depending on what an individual Linux user wants, you can get pretty much any language involved. (As Paul said, Python and C++ play important roles)

It can also be done using backtracking by maintaining a visited array.

void foo(vector<vector<int> > &s,vector<int> &data,int go,int k,vector<int> &vis,int tot)
{

    vis[go]=1;
    data.push_back(go);
    if(data.size()==k)
    {
        s.push_back(data);
        vis[go]=0;
    data.pop_back();
        return;
    }

    for(int i=go+1;i<=tot;++i)
    {
       if(!vis[i])
       {
           foo(s,data,i,k,vis,tot);
       }
    }
    vis[go]=0;
    data.pop_back();
}


vector<vector<int> > Solution::combine(int n, int k) {
   vector<int> data;
   vector<int> vis(n+1,0);
   vector<vector<int> > sol;
   for(int i=1;i<=n;++i)
   {
       for(int i=1;i<=n;++i) vis[i]=0;
   foo(sol,data,i,k,vis,n);
   }
   return sol;

}

I think your best bet is going to be to convert those lists into something parcelable such as a string (or map?) to get it to the Activity. Then the Activity will have to convert it back to an array.

Implementing custom parcelables is a pain in the neck IMHO so I would avoid it if possible.

there is only one faster way to check if the file exists and if you have permission to read it the way is using C language wish is faster and can be used also in any version in C++

solution: in C there is a library errno.h which has an external (global) integer variable called errno which contains a number that can be used to recognize the type of error

    #include <stdio.h>
    #include <stdbool.h>
    #include <errno.h>

    bool isFileExist(char fileName[]) {
        FILE *fp = fopen(fileName, "r");
        if (fp) {
            fclose(fp);
            return true;
        }
        return errno != ENOENT;
    }

    bool isFileCanBeRead(char fileName[]) {
        FILE *fp = fopen(fileName, "r");
        if (fp) {
            fclose(fp);
            return true;
        }
        return errno != ENOENT && errno != EPERM;
    }

List is an interface like Set and has ArrayList and LinkedList as general purpose implementations.

We can create List as:

 List<String> arrayList = new ArrayList<>();
 List<String> linkedList = new LinkedList<>(); 

We can also create a fixed-size list as:

List<String> list = Arrays.asList("A", "B", "C");

We would almost always be using ArrayList opposed to LinkedList implementation:

1. LinkedList uses a lot of space for objects and performs badly when we have lots of elements.
2. Any indexed operation in LinkedList requires O(n) time compared to O(1) in ArrayList.
3. Check this link for more information.

The list created by Arrays.asList above can not be modified structurally but its elements can still be modified.

Java 8

As per doc, the method Collections.unmodifiableList returns an unmodifiable view of the specified list. We can get it like:

Collections.unmodifiableList(Arrays.asList("A", "B", "C"));

Java 9

In case we are using Java 9 then:

List<String> list = List.of("A", "B");

Java 10

In case we are at Java 10 then the method Collectors.unmodifiableList will return an instance of truly unmodifiable list introduced in Java 9. Check this answer for more info about the difference in Collections.unmodifiableList vs Collectors.unmodifiableList in Java 10.

Use:

sed -e **'s/^[ \t]*//'**  name_of_file_from_which_you_want_to_remove_space > 'name _file_where_you_want_to_store_output'

For example:

sed -e 's/^[ \t]*//'  file1.txt > output.txt

Note:

s/: Substitute command ~ replacement for pattern (^[ \t]*) on each addressed line

^[ \t]*: Search pattern ( ^ – start of the line; [ \t]* match one or more blank spaces including tab)

//: Replace (delete) all matched patterns

heres a step by step procedure (assuming you've already installed python):

1. first install chocolatey:

open terminal (Run as Administrator) and type in the command line:

C:/> @powershell -NoProfile -ExecutionPolicy Bypass -Command "iex ((new-object net.webclient).DownloadString('https://chocolatey.org/install.ps1'))" && SET PATH=%PATH%;%ALLUSERSPROFILE%\chocolatey\bin

it will take some time to get chocolatey installed on your machine. sit back n relax...

2. now install pip. type in terminal cinst easy.install pip

3. now type in terminal: pip install flask

YOU'RE DONE !!! Tested on Win 8.1 with Python 2.7

Remove

<dependency>
    <groupId>log4j</groupId>
    <artifactId>log4j</artifactId>
    <version>1.2.16</version>
</dependency> 

slf4j-log4j12 is the log4j binding for slf4j you dont need to add another log4j dependency.

Added
Provide the log4j configuration in log4j.properties and add it to your class path. There are sample configurations here

or you can change your binding to

<dependency>
    <groupId>org.slf4j</groupId>
    <artifactId>slf4j-simple</artifactId>
    <version>1.6.1</version>
</dependency>

if you are configuring slf4j due to some dependencies requiring it.

public void SomeMethod(List<DateTime> dates)
{
    // do something
}

Just adding a new line worked for me if you're to store the markdown in a JavaScript variable. like so

let markdown = `
    1. Apple
    2. Mango
     this is juicy
    3. Orange
`

def find_pos(chaine,x):

    for i in range(len(chaine)):
        if chaine[i] ==x :
            return 'yes',i 
    return 'no'

The Python Tutorial simply calls it 'the *-operator'. It performs unpacking of arbitrary argument lists.

Go to File->Other Settings->Preferences for New Projects->Build, Execution, Deployment->Build Tools->Gradle->Uncheck Offline work option.

This is a useful article which graphically shows the explanation of the reset command.

https://git-scm.com/docs/git-reset

Reset --hard can be quite dangerous as it overwrites your working copy without checking, so if you haven't commited the file at all, it is gone.

As for Source tree, there is no way I know of to undo commits. It would most likely use reset under the covers anyway

What is the package name of your class? If there is no package name, then most likely the solution is:

java -cp FileManagement Main

Q1:Could the time it takes for a transaction to execute make the associated process more likely to be flagged as a deadlock victim.

No. The SELECT is the victim because it had only read data, therefore the transaction has a lower cost associated with it so is chosen as the victim:

By default, the Database Engine chooses as the deadlock victim the session running the transaction that is least expensive to roll back. Alternatively, a user can specify the priority of sessions in a deadlock situation using the SET DEADLOCK_PRIORITY statement. DEADLOCK_PRIORITY can be set to LOW, NORMAL, or HIGH, or alternatively can be set to any integer value in the range (-10 to 10).

Q2. If I execute the select with a NOLOCK hint, will this remove the problem?

No. For several reasons:

• you should first try to eliminate the deadlock properly, by investigating the root cause
• dirty reads are inconsistent reads.
• the proper way to specify dirty reads is to use transaction isolation levels
• there is a much better solution: read committed snapshot.

Q3. I suspect that a datetime field that is checked as part of the WHERE clause in the select statement is causing the slow lookup time. Can I create an index based on this field? Is it advisable?

Probably. The cause of the deadlock is almost very likely to be a poorly indexed database.10 minutes queries are acceptable in such narrow conditions, that I'm 100% certain in your case is not acceptable.

With 99% confidence I declare that your deadlock is cased by a large table scan conflicting with updates. Start by capturing the deadlock graph to analyze the cause. You will very likely have to optimize the schema of your database. Before you do any modification, read this topic Designing Indexes and the sub-articles.

Java convert a String to decimal:

String dennis = "0.00000008880000";
double f = Double.parseDouble(dennis);
System.out.println(f);
System.out.println(String.format("%.7f", f));
System.out.println(String.format("%.9f", new BigDecimal(f)));
System.out.println(String.format("%.35f", new BigDecimal(f)));
System.out.println(String.format("%.2f", new BigDecimal(f)));

This prints:

8.88E-8
0.0000001
0.000000089
0.00000008880000000000000106383001366
0.00

Here's what I ended up with. It's a listing of all properties and methods, and I listed all parameters for each method. I didn't succeed on getting all of the values.

foreach(System.Reflection.AssemblyName an in System.Reflection.Assembly.GetExecutingAssembly().GetReferencedAssemblies()){                      
            System.Reflection.Assembly asm = System.Reflection.Assembly.Load(an.ToString());
            foreach(Type type in asm.GetTypes()){   
                //PROPERTIES
                foreach (System.Reflection.PropertyInfo property in type.GetProperties()){
                    if (property.CanRead){
                        Response.Write("<br>" + an.ToString() + "." + type.ToString() + "." + property.Name);       
                    }
                }
                //METHODS
                var methods = type.GetMethods();
                foreach (System.Reflection.MethodInfo method in methods){               
                    Response.Write("<br><b>" + an.ToString() + "."  + type.ToString() + "." + method.Name  + "</b>");   
                    foreach (System.Reflection.ParameterInfo param in method.GetParameters())
                    {
                        Response.Write("<br><i>Param=" + param.Name.ToString());
                        Response.Write("<br>  Type=" + param.ParameterType.ToString());
                        Response.Write("<br>  Position=" + param.Position.ToString());
                        Response.Write("<br>  Optional=" + param.IsOptional.ToString() + "</i>");
                    }
                }
            }
        }

just open terminal and type this command

sudo chmod 666 /var/run/docker.sock

1. Implement javax.servlet.Filter.
2. In doFilter() method, cast the incoming ServletRequest to HttpServletRequest.
3. Use HttpServletRequest#getRequestURI() to grab the path.
4. Use straightforward java.lang.String methods like substring(), split(), concat() and so on to extract the part of interest and compose the new path.
5. Use either ServletRequest#getRequestDispatcher() and then RequestDispatcher#forward() to forward the request/response to the new URL (server-side redirect, not reflected in browser address bar), or cast the incoming ServletResponse to HttpServletResponse and then HttpServletResponse#sendRedirect() to redirect the response to the new URL (client side redirect, reflected in browser address bar).
6. Register the filter in web.xml on an url-pattern of /* or /Check_License/*, depending on the context path, or if you're on Servlet 3.0 already, use the @WebFilter annotation for that instead.

Don't forget to add a check in the code if the URL needs to be changed and if not, then just call FilterChain#doFilter(), else it will call itself in an infinite loop.

Alternatively you can also just use an existing 3rd party API to do all the work for you, such as Tuckey's UrlRewriteFilter which can be configured the way as you would do with Apache's mod_rewrite.

Define the class before you use it:

class Something:
    def out(self):
        print("it works")

s = Something()
s.out()

You need to pass self as the first argument to all instance methods.

In an application level, here are something a developer can do:

From server side:

1. Check if load balancer(if you have),works correctly.

2. Turn slow TCP timeouts into 503 Fast Immediate response, if you load balancer work correctly, it should pick the working resource to serve, and it's better than hanging there with unexpected error massages.

Eg: If you are using node server, u can use toobusy from npm. Implementation something like:

var toobusy = require('toobusy');
app.use(function(req, res, next) {
  if (toobusy()) res.send(503, "I'm busy right now, sorry.");
  else next();
});

Why 503? Here are some good insights for overload: http://ferd.ca/queues-don-t-fix-overload.html

We can do some work in client side too:

1. Try to group calls in batch, reduce the traffic and total requests number b/w client and server.

2. Try to build a cache mid-layer to handle unnecessary duplicates requests.

For whatever reason, the Scanner class also issues this same exception if it encounters special characters it cannot read. Beyond using the hasNextLine() method before each call to nextLine(), make sure the correct encoding is passed to the Scanner constructor, e.g.:

Scanner scanner = new Scanner(new FileInputStream(filePath), "UTF-8");

use python version 3.6 or 3.7 but the important thing is you should install the python version of 64-bit.

This could be your connectors for MySQL which need to be updated, as MySQL8 changed the encryption of passwords - so older connectors are encrypting them incorrectly.

The maven repo for the java connector can be found here.
If you use flyway plugin, you should also consider updating it, too!

Then you can simply update your maven pom with:

<dependency>
    <groupId>mysql</groupId>
    <artifactId>mysql-connector-java</artifactId>
    <version>8.0.17</version>
</dependency>

Or for others who use Gradle, you can update build.gradle with:

 buildscript {
    ext {
        ...
    }
    repositories {
        ...
        mavenCentral()
    }
    dependencies {
        classpath("org.springframework.boot:spring-boot-gradle-plugin:${springBootVersion}")
        classpath('mysql:mysql-connector-java:8.0.11')
    }
 }

With Git 2.15 (Q4 2017), "git branch" learned "-c/-C" to create a new branch by copying an existing one.

See commit c8b2cec (18 Jun 2017) by Ævar Arnfjörð Bjarmason (avar).
See commit 52d59cc, commit 5463caa (18 Jun 2017) by Sahil Dua (sahildua2305).
^{(Merged by Junio C Hamano -- gitster -- in commit 3b48045, 03 Oct 2017)}

branch: add a --copy (-c) option to go with --move (-m)

Add the ability to --copy a branch and its reflog and configuration, this uses the same underlying machinery as the --move (-m) option except the reflog and configuration is copied instead of being moved.

This is useful for e.g. copying a topic branch to a new version, e.g. work to work-2 after submitting the work topic to the list, while preserving all the tracking info and other configuration that goes with the branch, and unlike --move keeping the other already-submitted branch around for reference.

Note: when copying a branch, you remain on your current branch.
As Junio C Hamano explains, the initial implementation of this new feature was modifying HEAD, which was not good:

When creating a new branch B by copying the branch A that happens to be the current branch, it also updates HEAD to point at the new branch.
It probably was made this way because "git branch -c A B" piggybacked its implementation on "git branch -m A B",

This does not match the usual expectation.
If I were sitting on a blue chair, and somebody comes and repaints it to red, I would accept ending up sitting on a chair that is now red (I am also OK to stand, instead, as there no longer is my favourite blue chair).

But if somebody creates a new red chair, modelling it after the blue chair I am sitting on, I do not expect to be booted off of the blue chair and ending up on sitting on the new red one.

Now we no need to create custom ViewPager

A new ViewPager2 name View available in android

Vertical orientation support

• ViewPager2 supports vertical paging in addition to traditional horizontal paging. You can enable vertical paging for a ViewPager2 element by setting its android:orientation attribute

Using XML

<androidx.viewpager2.widget.ViewPager2
    xmlns:android="http://schemas.android.com/apk/res/android"
    android:id="@+id/pager"
    android:orientation="vertical" />

Using code

To disable swiping in viewpager2 use

viewPager2.setUserInputEnabled(false);

To enable swiping in viewpager2 Use

viewPager2.setUserInputEnabled(true);

for more information check this

• ViewPager2
• ViewPager2 under the Hood
• Hands on With ViewPager2

UPDATE

• Please check : Migrate from ViewPager to ViewPager2

• For complete example please check this Use of ViewPager2 in Android

You probably want something like this overload of String.Join:

String.Join<T> Method (String, IEnumerable<T>)

Docs:

http://msdn.microsoft.com/en-us/library/dd992421.aspx

In your example, you'd use

String.Join("", Client);

Please try like this : git clone --single-branch --branch <branchname> <url>

replace <branchname> with your branch and <url> with your url.

url will be like http://[email protected]:portno/yourrepo.git.

Best general purpose - Especially short arrays (1000 items or less) and coders that are unsure of what optimizations best suit their needs.

# $value can be any regex. be safe
if ( grep( /^$value$/, @array ) ) {
  print "found it";
}

It has been mentioned that grep passes through all values even if the first value in the array matches. This is true, however grep is still extremely fast for most cases. If you're talking about short arrays (less than 1000 items) then most algorithms are going to be pretty fast anyway. If you're talking about very long arrays (1,000,000 items) grep is acceptably quick regardless of whether the item is the first or the middle or last in the array.

Optimization Cases for longer arrays:

If your array is sorted, use a "binary search".

If the same array is repeatedly searched many times, copy it into a hash first and then check the hash. If memory is a concern, then move each item from the array into the hash. More memory efficient but destroys the original array.

If same values are searched repeatedly within the array, lazily build a cache. (as each item is searched, first check if the search result was stored in a persisted hash. if the search result is not found in the hash, then search the array and put the result in the persisted hash so that next time we'll find it in the hash and skip the search).

Note: these optimizations will only be faster when dealing with long arrays. Don't over optimize.

//create a variable that contain your button
Button button = (Button) findViewById(R.id.button);

    button.setOnClickListener(new OnClickListener(){
        @Override
        //On click function
        public void onClick(View view) {
            //Create the intent to start another activity
            Intent intent = new Intent(view.getContext(), AnotherActivity.class);
            startActivity(intent);
        }
    });

It should be possible using the command

sudo /etc/init.d/apache2 reload

I hope that helps.

If you need the transition to run infinitely, try the below example:

#box {_x000D_
  position: relative;_x000D_
  width: 100px;_x000D_
  height: 100px;_x000D_
  background-color: gray;_x000D_
  border: 5px solid black;_x000D_
  display: block;_x000D_
}_x000D_
_x000D_
#box:hover {_x000D_
  border-color: red;_x000D_
  animation-name: flash_border;_x000D_
  animation-duration: 2s;_x000D_
  animation-timing-function: linear;_x000D_
  animation-iteration-count: infinite;_x000D_
  -webkit-animation-name: flash_border;_x000D_
  -webkit-animation-duration: 2s;_x000D_
  -webkit-animation-timing-function: linear;_x000D_
  -webkit-animation-iteration-count: infinite;_x000D_
  -moz-animation-name: flash_border;_x000D_
  -moz-animation-duration: 2s;_x000D_
  -moz-animation-timing-function: linear;_x000D_
  -moz-animation-iteration-count: infinite;_x000D_
}_x000D_
_x000D_
@keyframes flash_border {_x000D_
  0% {_x000D_
    border-color: red;_x000D_
  }_x000D_
  50% {_x000D_
    border-color: black;_x000D_
  }_x000D_
  100% {_x000D_
    border-color: red;_x000D_
  }_x000D_
}_x000D_
_x000D_
@-webkit-keyframes flash_border {_x000D_
  0% {_x000D_
    border-color: red;_x000D_
  }_x000D_
  50% {_x000D_
    border-color: black;_x000D_
  }_x000D_
  100% {_x000D_
    border-color: red;_x000D_
  }_x000D_
}_x000D_
_x000D_
@-moz-keyframes flash_border {_x000D_
  0% {_x000D_
    border-color: red;_x000D_
  }_x000D_
  50% {_x000D_
    border-color: black;_x000D_
  }_x000D_
  100% {_x000D_
    border-color: red;_x000D_
  }_x000D_
}

<div id="box">roll over me</div>

EDIT: This is bad advice. Use "o", as above. "s" does the wrong thing.

I always use this:

dateTime.ToUniversalTime().ToString("s");

This is correct if your schema looks like this:

<xs:element name="startdate" type="xs:dateTime"/>

Which would result in:

<startdate>2002-05-30T09:00:00</startdate>

You can get more information here: http://www.w3schools.com/xml/schema_dtypes_date.asp

I am sure that you probably wanted the answer that @GSerg gave. There is also a worksheet function called rows that will give you the number of rows.

So, if you have a named data range called Data that has 7 rows, then =ROWS(Data) will show 7 in that cell.

delete.dirt <- function(DF, dart=c('NA')) {
  dirty_rows <- apply(DF, 1, function(r) !any(r %in% dart))
  DF <- DF[dirty_rows, ]
}

mydata <- delete.dirt(mydata)

Above function deletes all the rows from the data frame that has 'NA' in any column and returns the resultant data. If you want to check for multiple values like NA and ? change dart=c('NA') in function param to dart=c('NA', '?')

Get the value of your textboxes using val() and store them in a variable. Pass those values through $.post. In using the $.Post Submit button you can actually remove the form.

<script>

    username = $("#username").val(); 
    password = $("#password").val();

    $("#post-btn").click(function(){        
        $.post("process.php", { username:username, password:password } ,function(data){
            alert(data);
        });
    });
</script>

anaconda prompt -->pip install opencv-python

This has happened to me . Jquery version : 3.3. If you are looping through a list of objects, and want to add each object as a child of some parent dom element, then .html and .append will behave very different. .html will end up adding only the last object to the parent element, whereas .append will add all the list objects as children of the parent element.

Or

help(list.append)

if you're generally poking around.

The algorithms use iterator to the beginning and past the end of the sequence. That is, you want to call std::sort() something like this:

std::sort(std::begin(name), std::end(name));

In case you don't use C++11 and you don't have std::begin() and std::end(), they are easy to define yourself (obviously not in namespace std):

template <typename T, std::size_t Size>
T* begin(T (&array)[Size]) {
    return array;
}
template <typename T, std::size_t Size>
T* end(T (&array)[Size]) {
    return array + Size;
}

Some JavaScript engines can parse that format directly, which makes the task pretty easy:

function convertDate(inputFormat) {_x000D_
  function pad(s) { return (s < 10) ? '0' + s : s; }_x000D_
  var d = new Date(inputFormat)_x000D_
  return [pad(d.getDate()), pad(d.getMonth()+1), d.getFullYear()].join('/')_x000D_
}_x000D_
_x000D_
console.log(convertDate('Mon Nov 19 13:29:40 2012')) // => "19/11/2012"

This happens when the Server key and Sender ID parameters HTTP request do not match each other. Basically both server ID and Server key must belong to the same firebase project. Please refer to the below image. In case of mixing these parameters from deferent Firebase projects will cause error MismatchSenderId

In my case I was calling s3request.promise().then() incorreclty which caused two executions of the request happening when only one call was done.

What I mean is that I was iterating through 6 objects but 12 requests were made (you can check by logging in the console or debuging network in the browser)

Since the timestamp for the second, unwanted, request did not match the signture of the firs one this produced this issue.

$('#new_user_form').find('input').each(function(){
   //your code here
});

Instead of using <hr>, you can one of the border of the enclosing block and display it as a horizontal line.

Here is a sample code:

The HTML:

<div class="title_block">
    <h3>This is a header.</h3>
</div>
<p>Here is some sample paragraph text.<br>
This demonstrates that a horizontal line goes between the title and the paragraph.</p>

The CSS:

.title_block {
    border-bottom: 1px solid #ddd;
    padding-bottom: 5px;
    margin-bottom: 5px;
}

List of One Liners

Let's solve this problem for this array:

var array = ['A', 'B', 'C'];

1. Remove only the first: Use If you are sure that the item exist

array.splice(array.indexOf('B'), 1);

2. Remove only the last: Use If you are sure that the item exist

array.splice(array.lastIndexOf('B'), 1);

3. Remove all occurrences:

array = array.filter(v => v !== 'B'); 

Use jQuery's CSS selector syntax to select all div elements inside the element with id masterdiv. Then call empty() to clear the contents.

$('#masterdiv div').empty();

Using text('') or html('') will cause some string parsing to take place, which generally is a bad idea when working with the DOM. Try and use DOM manipulation methods that do not involve string representations of DOM objects wherever possible.

You are mixing the deprecated mysql extension with mysqli.

Try something like:

$sql = mysqli_query($success, "SELECT * FROM login WHERE username = '".$_POST['username']."' and password = '".md5($_POST['password'])."'");
$row = mysqli_num_rows($sql);

The difference between a non-lateral and a lateral join lies in whether you can look to the left hand table's row. For example:

select  *
from    table1 t1
cross join lateral
        (
        select  *
        from    t2
        where   t1.col1 = t2.col1 -- Only allowed because of lateral
        ) sub

This "outward looking" means that the subquery has to be evaluated more than once. After all, t1.col1 can assume many values.

By contrast, the subquery after a non-lateral join can be evaluated once:

select  *
from    table1 t1
cross join
        (
        select  *
        from    t2
        where   t2.col1 = 42 -- No reference to outer query
        ) sub

As is required without lateral, the inner query does not depend in any way on the outer query. A lateral query is an example of a correlated query, because of its relation with rows outside the query itself.

Don't ask what this has to do with that , but by right clicking the genymotion application file and changing to compatibility to Vista solved the problem!

Please note that in upcoming version of C# which is 8, the answers are not true.

All the reference types are non-nullable by default and you can actually do the following:

public string? MyNullableString; 
this.MyNullableString = null; //Valid

However,

public string MyNonNullableString; 
this.MyNonNullableString = null; //Not Valid and you'll receive compiler warning. 

The important thing here is to show the intent of your code. If the "intent" is that the reference type can be null, then mark it so otherwise assigning null value to non-nullable would result in compiler warning.

More info

Using the int value 1002 seems to work for PHP 5.3.0:

public static function createDB() {
    $dbHost="localhost";
    $dbName="project";
    $dbUser="admin";
    $dbPassword="whatever";
    $dbOptions=array(1002 => 'SET NAMES utf8',);
    return new DB($dbHost, $dbName, $dbUser, $dbPassword,$dbOptions);
}

function createConnexion() {
    return new PDO(
        "mysql:host=$this->dbHost;dbname=$this->dbName",
        $this->dbUser,
        $this->dbPassword,
        $this->dbOptions); 
}

<audio src="/music/good_enough.mp3" autoplay>
<p>If you are reading this, it is because your browser does not support the audio element.     </p>
<embed src="/music/good_enough.mp3" width="180" height="90" hidden="true" />
</audio>

Works for me just fine.

Use git clone with the --depth option set to 1 to create a shallow clone with a history truncated to the latest commit.

For example:

git clone --depth 1 https://github.com/user/repo.git

To also initialize and update any nested submodules, also pass --recurse-submodules and to clone them shallowly, also pass --shallow-submodules.

For example:

git clone --depth 1 --recurse-submodules --shallow-submodules https://github.com/user/repo.git

This code puts the above all together and restarts the current wpf app with admin privs:

if (IsAdministrator() == false)
{
    // Restart program and run as admin
    var exeName = System.Diagnostics.Process.GetCurrentProcess().MainModule.FileName;
    ProcessStartInfo startInfo = new ProcessStartInfo(exeName);
    startInfo.Verb = "runas";
    System.Diagnostics.Process.Start(startInfo);
    Application.Current.Shutdown();
    return;
}

private static bool IsAdministrator()
{
    WindowsIdentity identity = WindowsIdentity.GetCurrent();
    WindowsPrincipal principal = new WindowsPrincipal(identity);
    return principal.IsInRole(WindowsBuiltInRole.Administrator);
}


// To run as admin, alter exe manifest file after building.
// Or create shortcut with "as admin" checked.
// Or ShellExecute(C# Process.Start) can elevate - use verb "runas".
// Or an elevate vbs script can launch programs as admin.
// (does not work: "runas /user:admin" from cmd-line prompts for admin pass)

Update: The app manifest way is preferred:

Right click project in visual studio, add, new application manifest file, change the file so you have requireAdministrator set as shown in the above.

A problem with the original way: If you put the restart code in app.xaml.cs OnStartup, it still may start the main window briefly even though Shutdown was called. My main window blew up if app.xaml.cs init was not run and in certain race conditions it would do this.