This is almost identical to how Karl Shifflet demonstrated a RelayCommand, where Execute fires a predetermined Action<T>. A top-notch solution, if you ask me.

public class RelayCommand : ICommand
{
    private readonly Predicate<object> _canExecute;
    private readonly Action<object> _execute;

    public RelayCommand(Predicate<object> canExecute, Action<object> execute)
    {
        _canExecute = canExecute;
        _execute = execute;
    }

    public event EventHandler CanExecuteChanged
    {
        add => CommandManager.RequerySuggested += value;
        remove => CommandManager.RequerySuggested -= value;
    }

    public bool CanExecute(object parameter)
    {
        return _canExecute(parameter);
    }

    public void Execute(object parameter)
    {
        _execute(parameter);
    }
}

This could then be used as...

public class MyViewModel
{
    private ICommand _doSomething;
    public ICommand DoSomethingCommand
    {
        get
        {
            if (_doSomething == null)
            {
                _doSomething = new RelayCommand(
                    p => this.CanDoSomething,
                    p => this.DoSomeImportantMethod());
            }
            return _doSomething;
        }
    }
}

Read more:
Josh Smith (introducer of RelayCommand): Patterns - WPF Apps With The MVVM Design Pattern

"ViewModel" implies MVVM. If you're doing MVVM you shouldn't be passing views into your view models. Typically you do something like this in your XAML:

<Button Content="Edit" 
        Command="{Binding EditCommand}"
        CommandParameter="{Binding ViewModelItem}" >

And then this in your view model:

private ViewModelItemType _ViewModelItem;
public ViewModelItemType ViewModelItem
{
    get
    {
        return this._ViewModelItem;
    }
    set
    {
        this._ViewModelItem = value;
        RaisePropertyChanged(() => this.ViewModelItem);
    }
}

public ICommand EditCommand { get { return new RelayCommand<ViewModelItemType>(OnEdit); } }
private void OnEdit(ViewModelItemType itemToEdit)
{
    ... do something here...
}

Obviously this is just to illustrate the point, if you only had one property to edit called ViewModelItem then you wouldn't need to pass it in as a command parameter.

String result = String.format("%0" + messageDigest.length + "s", hexString.toString())

That's the shortest solution given what you already have. If you could convert the byte array to a numeric value, String.format can convert it to a hex string at the same time.

The trouble looks like the image isn't square and the browser adjusts as such. After rotation ensure the dimensions are retained by changing the image margin.

.imagetest img {
  transform: rotate(270deg);
  ...
  margin: 10px 0px;
}

The amount will depend on the difference in height x width of the image. You may also need to add display:inline-block; or display:block to get it to recognize the margin parameter.

Above two answers are correct but didn't work for me.

1. I kept on seeing blank like below for docker container ls
2. then I tried, docker container ls -a and after that it showed all the process previously exited and running.
3. Then docker stop <container id> or docker container stop <container id> didn't work
4. then I tried docker rm -f <container id> and it worked.
5. Now at this I tried docker container ls -a and this process wasn't present.

All values of column A that are not present in column B will have a red background. Hope that it helps as starting point.

Sub highlight_missings()
Dim i As Long, lastA As Long, lastB As Long
Dim compare As Variant
Range("A:A").ClearFormats
lastA = Range("A65536").End(xlUp).Row
lastB = Range("B65536").End(xlUp).Row

For i = 2 To lastA
    compare = Application.Match(Range("a" & i), Range("B2:B" & lastB), 0)
        If IsError(compare) Then
            Range("A" & i).Interior.ColorIndex = 3
        End If
Next i
End Sub

The thread's a little old. But from the title I thought it had promise for my needs. Unfortunately, my structure didn't lend itself easily to the nth-of-type solution. Here's a Thymeleaf solution.

.back-red {
  background-color:red;
}
.back-green {
  background-color:green;
}


<div class="container">
    <div class="row" th:with="employees=${{'emp-01', 'emp-02', 'emp-03', 'emp-04', 'emp-05', 'emp-06', 'emp-07', 'emp-08', 'emp-09', 'emp-10', 'emp-11', 'emp-12'}}">
        <div class="col-md-4 col-sm-6 col-xs-12" th:each="i:${#numbers.sequence(0, #lists.size(employees))}" th:classappend'(${i} % 2) == 0?back-red:back-green"><span th:text="${emplyees[i]}"></span></div>
    </div>
</div>

upstream defines a cluster that you can proxy requests to. It's commonly used for defining either a web server cluster for load balancing, or an app server cluster for routing / load balancing.

I had a similar issue and found this thread. Replace didn't work for me, and going by the parent was difficult for my situation. Inner Html replaced the children, which wasn't what I wanted either. Using outerHTML got the job done. Hope this helps someone else!

currEl = <div>hello</div>
newElem = <span>Goodbye</span>
currEl.outerHTML = newElem
# currEl = <span>Goodbye</span>

1. Open your .jrxml file in iReport Designer.
2. Open the Report Inspector (Window -> Report Inspector).
3. Right-click your report name on the top of the inspector and then click "Compile Report".

You can also Preview your report so it's automatically compiled.

The original post requested for code which prints some rows (if they are true for some condition) plus the following row. My implementation would be this:

text = """1 sfasdf
asdfasdf
2 sfasdf
asdfgadfg
1 asfasdf
sdfasdgf
"""

text = text.splitlines()
rows_to_print = {}

for line in range(len(text)):
    if text[line][0] == '1':
        rows_to_print = rows_to_print | {line, line + 1}

rows_to_print = sorted(list(rows_to_print))

for i in rows_to_print:
    print(text[i])

If you want buffers to work like tabs, check out the tabline plugin.

That uses a single window, and adds a line on the top to simulate the tabs (just showing the list of buffers). This came out a long time ago when tabs were only supported in GVim but not in the command line vim. Since it is only operating with buffers, everything integrates well with the rest of vim.

Subversion implicitly has the remote repository associated with it at all times. Git, on the other hand, allows many "remotes", each of which represents a single remote place you can push to or pull from.

You need to add a remote for the GitHub repository to your local repository, then use git push ${remote} or git pull ${remote} to push and pull respectively - or the GUI equivalents.

Pro Git discusses remotes here: http://git-scm.com/book/ch2-5.html

The GitHub help also discusses them in a more "task-focused" way here: http://help.github.com/remotes/

Once you have associated the two you will be able to push or pull branches.

Its given on OFFICIAL MYSQL website.

SET GLOBAL general_log = 'ON';

You can also use custom path:

[mysqld]
# Set Slow Query Log
long_query_time = 1
slow_query_log = 1
slow_query_log_file = "C:/slowquery.log"

#Set General Log
log = "C:/genquery.log"

Starting with python 2.6 and python 3 you can use bytearrays which are mutable (can be changed element-wise unlike strings):

s = "abcdefg"
b_s = bytearray(s)
b_s[1] = "Z"
s = str(b_s)
print s
aZcdefg

edit: Changed str to s

edit2: As Two-Bit Alchemist mentioned in the comments, this code does not work with unicode.

I see std::weak_ptr<T> as a handle to a std::shared_ptr<T>: It allows me to get the std::shared_ptr<T> if it still exists, but it will not extend its lifetime. There are several scenarios when such point of view is useful:

// Some sort of image; very expensive to create.
std::shared_ptr< Texture > texture;

// A Widget should be able to quickly get a handle to a Texture. On the
// other hand, I don't want to keep Textures around just because a widget
// may need it.

struct Widget {
    std::weak_ptr< Texture > texture_handle;
    void render() {
        if (auto texture = texture_handle.get(); texture) {
            // do stuff with texture. Warning: `texture`
            // is now extending the lifetime because it
            // is a std::shared_ptr< Texture >.
        } else {
            // gracefully degrade; there's no texture.
        }
    }
};

Another important scenario is to break cycles in data structures.

// Asking for trouble because a node owns the next node, and the next node owns
// the previous node: memory leak; no destructors automatically called.
struct Node {
    std::shared_ptr< Node > next;
    std::shared_ptr< Node > prev;
};

// Asking for trouble because a parent owns its children and children own their
// parents: memory leak; no destructors automatically called.
struct Node {
    std::shared_ptr< Node > parent;
    std::shared_ptr< Node > left_child;
    std::shared_ptr< Node > right_child;
};

// Better: break dependencies using a std::weak_ptr (but not best way to do it;
// see Herb Sutter's talk).
struct Node {
    std::shared_ptr< Node > next;
    std::weak_ptr< Node > prev;
};

// Better: break dependencies using a std::weak_ptr (but not best way to do it;
// see Herb Sutter's talk).
struct Node {
    std::weak_ptr< Node > parent;
    std::shared_ptr< Node > left_child;
    std::shared_ptr< Node > right_child;
};

Herb Sutter has an excellent talk that explains the best use of language features (in this case smart pointers) to ensure Leak Freedom by Default (meaning: everything clicks in place by construction; you can hardly screw it up). It is a must watch.

You can use $(!!) to recompute (not re-use) the output of the last command.

The !! on its own executes the last command.

$ echo pierre
pierre
$ echo my name is $(!!)
echo my name is $(echo pierre)
my name is pierre

PHP 5.4 has a function called http_response_code, so if you're using PHP 5.4 you can just do:

http_response_code(500);

I've written a polyfill for this function (Gist) if you're running a version of PHP under 5.4.

To answer your follow-up question, the HTTP 1.1 RFC says:

The reason phrases listed here are only recommendations -- they MAY be replaced by local equivalents without affecting the protocol.

That means you can use whatever text you want (excluding carriage returns or line feeds) after the code itself, and it'll work. Generally, though, there's usually a better response code to use. For example, instead of using a 500 for no record found, you could send a 404 (not found), and for something like "conditions failed" (I'm guessing a validation error), you could send something like a 422 (unprocessable entity).

Well that is Because of

you are only able to encrypt data in blocks of 128 bits or 16 bytes. That's why you are getting that IllegalBlockSizeException exception. and the one way is to encrypt that data Directly into the String.

look this. Try and u will be able to resolve this

public static String decrypt(String encryptedData) throws Exception {

    Key key = generateKey();
    Cipher c = Cipher.getInstance(ALGO);
    c.init(Cipher.DECRYPT_MODE, key);
    String decordedValue = new BASE64Decoder().decodeBuffer(encryptedData).toString().trim();
    System.out.println("This is Data to be Decrypted" + decordedValue);
    return decordedValue;
}

hope that will help.

INADDR_ANY instructs listening socket to bind to all available interfaces. It's the same as trying to bind to inet_addr("0.0.0.0"). For completeness I'll also mention that there is also IN6ADDR_ANY_INIT for IPv6 and it's the same as trying to bind to :: address for IPv6 socket.

#include <netinet/in.h>

struct in6_addr addr = IN6ADDR_ANY_INIT;

Also, note that when you bind IPv6 socket to to IN6ADDR_ANY_INIT your socket will bind to all IPv6 interfaces, and should be able to accept connections from IPv4 clients as well (though IPv6-mapped addresses).

Do you have to use window.open? What about using window.location="http://example.com"?

You need to apply the logo class to the image...then float the ul

Codepen Demo

HTML

<img class="logo" src="http://i.imgur.com/hCrQkJi.png">

CSS

.navigation-bar ul {
  padding: 0px;
  margin: 0px;
  text-align: center;
  float: left;
  background: white;
}

I have been working on an open source project that allows you to hot replace classes over and above what hot swap allows: https://github.com/fakereplace/fakereplace

It may or may not work for you, but any feedback is appreciated

Per the Javadoc:

Returns the value of a request parameter as a String, or null if the parameter does not exist.

Do note that it is possible to submit an empty parameter - such that the parameter exists, but has no value. For example, I could include &log=&somethingElse into the URL to enable logging, without needing to specify &log=true. In this case, the value will be an empty String ("").

Sorry EMS, but I actually just got another response from the matplotlib mailling list (Thanks goes out to Benjamin Root).

The code I am looking for is adjusting the savefig call to:

fig.savefig('samplefigure', bbox_extra_artists=(lgd,), bbox_inches='tight')
#Note that the bbox_extra_artists must be an iterable

This is apparently similar to calling tight_layout, but instead you allow savefig to consider extra artists in the calculation. This did in fact resize the figure box as desired.

import matplotlib.pyplot as plt
import numpy as np

plt.gcf().clear()
x = np.arange(-2*np.pi, 2*np.pi, 0.1)
fig = plt.figure(1)
ax = fig.add_subplot(111)
ax.plot(x, np.sin(x), label='Sine')
ax.plot(x, np.cos(x), label='Cosine')
ax.plot(x, np.arctan(x), label='Inverse tan')
handles, labels = ax.get_legend_handles_labels()
lgd = ax.legend(handles, labels, loc='upper center', bbox_to_anchor=(0.5,-0.1))
text = ax.text(-0.2,1.05, "Aribitrary text", transform=ax.transAxes)
ax.set_title("Trigonometry")
ax.grid('on')
fig.savefig('samplefigure', bbox_extra_artists=(lgd,text), bbox_inches='tight')

This produces:

[edit] The intent of this question was to completely avoid the use of arbitrary coordinate placements of arbitrary text as was the traditional solution to these problems. Despite this, numerous edits recently have insisted on putting these in, often in ways that led to the code raising an error. I have now fixed the issues and tidied the arbitrary text to show how these are also considered within the bbox_extra_artists algorithm.

Lets say ClassOne is defined as:

public class ClassOne
{
    protected $arg1;
    protected $arg2;

    //Contructor
    public function __construct($arg1, $arg2)
    {
        $this->arg1 = $arg1;
        $this->arg2 = $arg2;
    }

    public function echoArgOne
    {
        echo $this->arg1;
    }

}

Using PHP Reflection;

$str = "One";
$className = "Class".$str;
$class = new \ReflectionClass($className);

Create a new Instance:

$instance = $class->newInstanceArgs(["Banana", "Apple")]);

Call a method:

$instance->echoArgOne();
//prints "Banana"

Use a variable as a method:

$method = "echoArgOne";
$instance->$method();

//prints "Banana"

Using Reflection instead of just using the raw string to create an object gives you better control over your object and easier testability (PHPUnit relies heavily on Reflection)

Post.find().sort({date:-1}, function(err, posts){
});

Should work as well

EDIT:

You can also try using this if you get the error sort() only takes 1 Argument :

Post.find({}, {
    '_id': 0,    // select keys to return here
}, {sort: '-date'}, function(err, posts) {
    // use it here
});

db2 connect to MY_INSTACE_DB with myuser -- connect to db2    
db2 "select TABNAME from syscat.tables where tabschema = 'mySchema' with ur"
db2 terminate -- end connection

The 1*y method works in Numpy too:

>>> import numpy as np
>>> x = np.array([4, 3, 2, 1])
>>> y = 2 >= x
>>> y
array([False, False,  True,  True], dtype=bool)
>>> 1*y                      # Method 1
array([0, 0, 1, 1])
>>> y.astype(int)            # Method 2
array([0, 0, 1, 1]) 

If you are asking for a way to convert Python lists from Boolean to int, you can use map to do it:

>>> testList = [False, False,  True,  True]
>>> map(lambda x: 1 if x else 0, testList)
[0, 0, 1, 1]
>>> map(int, testList)
[0, 0, 1, 1]

Or using list comprehensions:

>>> testList
[False, False, True, True]
>>> [int(elem) for elem in testList]
[0, 0, 1, 1]

Copy the below code to a batch file and execute. Below requires Winzip to be installed/accessible from your machine. Do change variables as per your need.

@ECHO OFF
SET winzip_path="C:\Program Files\WinZip"
SET source_path="C:\Test"
SET output_path="C:\Output\"
SET log_file="C:\Test\unzip_log.txt"
SET file_name="*.zip"

cd %source_path%
echo Executing for %source_path% > %log_file%

FOR /f "tokens=*" %%G IN ('dir %file_name% /b') DO (
echo Processing : %%G
echo File_Name : %%G >> %log_file%
%winzip_path%\WINZIP32.EXE -e %%G %output_path%
)

PAUSE

corrected:

SELECT u_name AS user_name FROM users WHERE u_name = 'john';

For anyone who is trying to do it without modifying your ViewModels AND not loading all your records from the database.

Repository

    public List<Order> GetOrderPage(int page, int itemsPerPage, out int totalCount)
    {
        List<Order> orders = new List<Order>();
        using (DatabaseContext db = new DatabaseContext())
        {
            orders = (from o in db.Orders
                      orderby o.Date descending //use orderby, otherwise Skip will throw an error
                      select o)
                      .Skip(itemsPerPage * page).Take(itemsPerPage)
                      .ToList();
            totalCount = db.Orders.Count();//return the number of pages
        }
        return orders;//the query is now already executed, it is a subset of all the orders.
    }

Controller

    public ActionResult Index(int? page)
    {
        int pagenumber = (page ?? 1) -1; //I know what you're thinking, don't put it on 0 :)
        OrderManagement orderMan = new OrderManagement(HttpContext.ApplicationInstance.Context);
        int totalCount = 0;
        List<Order> orders = orderMan.GetOrderPage(pagenumber, 5, out totalCount);
        List<OrderViewModel> orderViews = new List<OrderViewModel>();
        foreach(Order order in orders)//convert your models to some view models.
        {
            orderViews.Add(orderMan.GenerateOrderViewModel(order));
        }
        //create staticPageList, defining your viewModel, current page, page size and total number of pages.
        IPagedList<OrderViewModel> pageOrders = new StaticPagedList<OrderViewModel>(orderViews, pagenumber + 1, 5, totalCount);
        return View(pageOrders);
    }

View

@using PagedList.Mvc;
@using PagedList; 

@model IPagedList<Babywatcher.Core.Models.OrderViewModel>

@{
    ViewBag.Title = "Index";
}

<h2>Index</h2>
<div class="container-fluid">
    <p>
        @Html.ActionLink("Create New", "Create")
    </p>
    @if (Model.Count > 0)
    {


        <table class="table">
          <tr>
            <th>
                @Html.DisplayNameFor(model => model.First().orderId)
            </th>
            <!--rest of your stuff-->
        </table>

    }
    else
    {
        <p>No Orders yet.</p>
    }
    @Html.PagedListPager(Model, page => Url.Action("Index", new { page }))
</div>

Bonus

Do above first, then perhaps use this!

Since this question is about (view) models, I'm going to give away a little solution for you that will not only be useful for paging, but for the rest of your application if you want to keep your entities separate, only used in the repository, and have the rest of the application deal with models (which can be used as view models).

Repository

In your order repository (in my case), add a static method to convert a model:

public static OrderModel ConvertToModel(Order entity)
{
    if (entity == null) return null;
    OrderModel model = new OrderModel
    {
        ContactId = entity.contactId,
        OrderId = entity.orderId,
    }
    return model;
}

Below your repository class, add this:

public static partial class Ex
{
    public static IEnumerable<OrderModel> SelectOrderModel(this IEnumerable<Order> source)
    {
        bool includeRelations = source.GetType() != typeof(DbQuery<Order>);
        return source.Select(x => new OrderModel
        {
            OrderId = x.orderId,
            //example use ConvertToModel of some other repository
            BillingAddress = includeRelations ? AddressRepository.ConvertToModel(x.BillingAddress) : null,
            //example use another extension of some other repository
            Shipments = includeRelations && x.Shipments != null ? x.Shipments.SelectShipmentModel() : null
        });
    }
}

And then in your GetOrderPage method:

    public IEnumerable<OrderModel> GetOrderPage(int page, int itemsPerPage, string searchString, string sortOrder, int? partnerId,
        out int totalCount)
    {
        IQueryable<Order> query = DbContext.Orders; //get queryable from db
        .....//do your filtering, sorting, paging (do not use .ToList() yet)

        return queryOrders.SelectOrderModel().AsEnumerable();
        //or, if you want to include relations
        return queryOrders.Include(x => x.BillingAddress).ToList().SelectOrderModel();
        //notice difference, first ToList(), then SelectOrderModel().
    }

Let me explain:

The static ConvertToModel method can be accessed by any other repository, as used above, I use ConvertToModel from some AddressRepository.

The extension class/method lets you convert an entity to a model. This can be IQueryable or any other list, collection.

Now here comes the magic: If you have executed the query BEFORE calling SelectOrderModel() extension, includeRelations inside the extension will be true because the source is NOT a database query type (not an linq-to-sql IQueryable). When this is true, the extension can call other methods/extensions throughout your application for converting models.

Now on the other side: You can first execute the extension and then continue doing LINQ filtering. The filtering will happen in the database eventually, because you did not do a .ToList() yet, the extension is just an layer of dealing with your queries. Linq-to-sql will eventually know what filtering to apply in the Database. The inlcudeRelations will be false so that it doesn't call other c# methods that SQL doesn't understand.

It looks complicated at first, extensions might be something new, but it's really useful. Eventually when you have set this up for all repositories, simply an .Include() extra will load the relations.

Just put in the function using GLOBAL keyword:

 global $site_url;

The Predicate will always return a boolean, by definition.

Predicate<T> is basically identical to Func<T,bool>.

Predicates are very useful in programming. They are often used to allow you to provide logic at runtime, that can be as simple or as complicated as necessary.

For example, WPF uses a Predicate<T> as input for Filtering of a ListView's ICollectionView. This lets you write logic that can return a boolean determining whether a specific element should be included in the final view. The logic can be very simple (just return a boolean on the object) or very complex, all up to you.

Here is the solution Using Predefined words in NLTK toolkit NLTK has nltk.corpus package in that we have package called words and it contains more than 2Lakhs English words you can simply use all into your program.

Once creating your matrix convert it into a character array and perform this code

import nltk
from nltk.corpus import words
from collections import Counter

def possibleWords(input, charSet):
    for word in input:
        dict = Counter(word)
        flag = 1
        for key in dict.keys():
            if key not in charSet:
                flag = 0
        if flag == 1 and len(word)>5: #its depends if you want only length more than 5 use this otherwise remove that one. 
            print(word)


nltk.download('words')
word_list = words.words()
# prints 236736
print(len(word_list))
charSet = ['h', 'e', 'l', 'o', 'n', 'v', 't']
possibleWords(word_list, charSet)

Output:

eleven
eleventh
elevon
entente
entone
ethene
ethenol
evolve
evolvent
hellhole
helvell
hooven
letten
looten
nettle
nonene
nonent
nonlevel
notelet
novelet
novelette
novene
teenet
teethe
teevee
telethon
tellee
tenent
tentlet
theelol
toetoe
tonlet
toothlet
tootle
tottle
vellon
velvet
velveteen
venene
vennel
venthole
voeten
volent
volvelle
volvent
voteen

I hope you get it.

Simply use this one:

select * from t1 where to_date(date_column)='8/3/2010'

If it's in a class, you can use getattr:

class MyClass(object):
    def install(self):
          print "In install"

method_name = 'install' # set by the command line options
my_cls = MyClass()

method = None
try:
    method = getattr(my_cls, method_name)
except AttributeError:
    raise NotImplementedError("Class `{}` does not implement `{}`".format(my_cls.__class__.__name__, method_name))

method()

or if it's a function:

def install():
       print "In install"

method_name = 'install' # set by the command line options
possibles = globals().copy()
possibles.update(locals())
method = possibles.get(method_name)
if not method:
     raise NotImplementedError("Method %s not implemented" % method_name)
method()

You can start IPython from within ipdb.

Induce the ipdb debugger¹:

import idpb; ipdb.set_trace()

Enter IPython from within in the ipdb> console²:

from IPython import embed; embed()

Return to the ipdb> console from within IPython:

exit

If you're lucky enough to be using Emacs, things can be made even more convenient.

This requires using M-x shell. Using yasnippet and bm, define the following snippet. This will replace the text ipdb in the editor with the set-trace line. After inserting the snippet, the line will be highlighted so that it is easily noticeable and navigable. Use M-x bm-next to navigate.

# -*- mode: snippet -*-
# name: ipdb
# key: ipdb
# expand-env: ((yas-after-exit-snippet-hook #'bm-toggle))
# --
import ipdb; ipdb.set_trace()

¹ All on one line for easy deletion. Since imports only happen once, this form ensures ipdb will be imported when you need it with no extra overhead.

² You can save yourself some typing by importing IPython within your .pdbrc file:

try:
    from IPython import embed
except:
    pass

This allows you to simply call embed() from within ipdb (of course, only when IPython is installed).

This assumes you know the position of the element in the ListView :

  View element = listView.getListAdapter().getView(position, null, null);

Then you should be able to call getLeft() and getTop() to determine the elements on screen position.

I did some benchmarking and it turns out that dict is faster than both list and set for large data sets, running python 2.7.3 on an i7 CPU on linux:

• python -mtimeit -s 'd=range(10**7)' '5*10**6 in d'

  10 loops, best of 3: 64.2 msec per loop

• python -mtimeit -s 'd=dict.fromkeys(range(10**7))' '5*10**6 in d'

  10000000 loops, best of 3: 0.0759 usec per loop

• python -mtimeit -s 'from sets import Set; d=Set(range(10**7))' '5*10**6 in d'

  1000000 loops, best of 3: 0.262 usec per loop

As you can see, dict is considerably faster than list and about 3 times faster than set. In some applications you might still want to choose set for the beauty of it, though. And if the data sets are really small (< 1000 elements) lists perform pretty well.

I know this is an old thread but I was digging into the jQuery UI source code and built upon Rowan's answer which was closer to what I had been looking for. Only I needed the carrots as I felt it was important to have a visual indicator of possible submenus. From looking at the source code (both .js and .css) I came up with this that allows the carrot be visiable without messing with design (height) and also alowing menu to appear vertical below the parent item.

In the jquery-ui.js do a search to find $.widget( "ui.menu") and change postition to:

position: {
my: "center top",
at: "center bottom"
}

And in your css add:

#nav > .ui-menu:after {
    content: ".";
    display: block;
    clear: both;
    visibility: hidden;
    line-height: 0;
    height: 0;
}

#nav > .ui-menu > .ui-menu-item {
    display: inline-block;
    float: left;

    margin: 0;
    padding: 3px;

    width: auto;
}

.ui-menu .ui-menu-item a {
    padding: 0;
}

.ui-menu .ui-menu-icon{
    position: relative;
    left: 1px;
    top: 6px;
}

End Result will be a jQuery UI Menu horizontal with sub menus being displayed veriticaly below the parent menu item.

In the example a string is executed as code using the exec function.

import sys
import StringIO

# create file-like string to capture output
codeOut = StringIO.StringIO()
codeErr = StringIO.StringIO()

code = """
def f(x):
    x = x + 1
    return x

print 'This is my output.'
"""

# capture output and errors
sys.stdout = codeOut
sys.stderr = codeErr

exec code

# restore stdout and stderr
sys.stdout = sys.__stdout__
sys.stderr = sys.__stderr__

print f(4)

s = codeErr.getvalue()

print "error:\n%s\n" % s

s = codeOut.getvalue()

print "output:\n%s" % s

codeOut.close()
codeErr.close()

Itertools has a function just for that:

import itertools
it = itertools.repeat(e,n)

Of course itertools gives you a iterator instead of a list. [e] * n gives you a list, but, depending on what you will do with those sequences, the itertools variant can be much more efficient.

The first step would be to add

position: 'absolute',

then if you want the element full width, add

left: 0,
right: 0,

then, if you want to put the element in the bottom, add

bottom: 0,
// don't need set top: 0

if you want to position the element at the top, replace bottom: 0 by top: 0

add this code in .htaccess (as an alternative of php.ini / ini_set function):

<IfModule mod_php5.c>
php_flag log_errors on 
php_value error_log ./path_to_MY_PHP_ERRORS.log
# php_flag display_errors on 
</IfModule>

* as commented: this is for Apache-type servers, and not for Nginx or others.

Give http://www.privateshell.com/ a shot.

I ended up here after attempting to follow Ryan Bate's tutorial on deploying to AWS EC2 with rubber. Here is what happened for me: We created a new app using "

rails new blog -d postgresql

Obviosuly this creates a new app with pg as the database, but the database was not made yet. With sqlite, you just run rake db:migrate, however with pg you need to create the pg database first. Ryan did not do this step. The command is rake db:create:all, then we can run rake db:migrate

The second part is changing the database.yml file. The default for the username when the file is generated is 'appname'. However, chances are your role for postgresql admin is something different (at least it was for me). I changed it to my name (see above advice about creating a role name) and I was good to go.

Hope this helps.

The most Pythonic way is to use the len(). Keep in mind that the '\' character in escape sequences is not counted and can be dangerous if not used correctly.

>>> len('foo')
3
>>> len('\foo')
3
>>> len('\xoo')
  File "<stdin>", line 1
SyntaxError: (unicode error) 'unicodeescape' codec can't decode bytes in position 0-1: truncated \xXX escape

It can be very useful when flattening a hierarchy and/or mapping objects. Instead of:

if (Model.Model2 == null
  || Model.Model2.Model3 == null
  || Model.Model2.Model3.Model4 == null
  || Model.Model2.Model3.Model4.Name == null)
{
  mapped.Name = "N/A"
}
else
{
  mapped.Name = Model.Model2.Model3.Model4.Name;
}

It can be written like (same logic as above)

mapped.Name = Model.Model2?.Model3?.Model4?.Name ?? "N/A";

DotNetFiddle.Net Working Example.

(the ?? or null-coalescing operator is different than the ? or null conditional operator).

It can also be used out side of assignment operators with Action. Instead of

Action<TValue> myAction = null;

if (myAction != null)
{
  myAction(TValue);
}

It can be simplified to:

myAction?.Invoke(TValue);

DotNetFiddle Example:

using System;

public class Program
{
  public static void Main()
  {
    Action<string> consoleWrite = null;

    consoleWrite?.Invoke("Test 1");

    consoleWrite = (s) => Console.WriteLine(s);

    consoleWrite?.Invoke("Test 2");
  }
}

Result:

Test 2

There is no portable way to do this, but select() might be a good way. See http://c-faq.com/osdep/readavail.html for more possible solutions.

Although already answered, and author's intent is to create a front controller type app but I am posting literal rule for problem asked. if someone having the problem for same.

RewriteEngine On
RewriteRule ^([^/]+)/([^/]+)/([\d]+)$ $1?id=$3 [L]

Above should work for url picture.php/Some-text-goes-here/51. without using a index.php as a redirect app.

The TensorFlow Convolution example gives an overview about the difference between SAME and VALID :

• For the SAME padding, the output height and width are computed as:

  out_height = ceil(float(in_height) / float(strides[1]))
  out_width  = ceil(float(in_width) / float(strides[2]))
  

And

• For the VALID padding, the output height and width are computed as:

  out_height = ceil(float(in_height - filter_height + 1) / float(strides[1]))
  out_width  = ceil(float(in_width - filter_width + 1) / float(strides[2]))
  

jasmine.DEFAULT_TIMEOUT_INTERVAL = 100000;

Keeping this in the block solved my issue.

it('', () => {
 jasmine.DEFAULT_TIMEOUT_INTERVAL = 100000;
});

I have wasted 3 days
ultimately solved a graph question
used for
finding shortest distance
using BFS

Want to share the experience.

When the (undirected for me) graph has
fixed distance (1, 6, etc.) for edges

#1
We can use BFS to find shortest path simply by traversing it
then, if required, multiply with fixed distance (1, 6, etc.)

#2
As noted above
with BFS
the very 1st time an adjacent node is reached, it is shortest path

#3
It does not matter what queue you use
   deque/queue(c++) or
   your own queue implementation (in c language)
   A circular queue is unnecessary

#4
Number of elements required for queue is N+1 at most, which I used
(dint check if N works)
here, N is V, number of vertices.

#5
Wikipedia BFS will work, and is sufficient.
    https://en.wikipedia.org/wiki/Breadth-first_search#Pseudocode

I have lost 3 days trying all above alternatives, verifying & re-verifying again and again above
they are not the issue.
(Try to spend time looking for other issues, if you dint find any issues with above 5).

More explanation from the comment below:

      A
     /  \
  B       C
 /\       /\
D  E     F  G

Assume above is your graph
graph goes downwards
For A, the adjacents are B & C
For B, the adjacents are D & E
For C, the adjacents are F & G

say, start node is A

1. when you reach A, to, B & C the shortest distance to B & C from A is 1

2. when you reach D or E, thru B, the shortest distance to A & D is 2 (A->B->D)

similarly, A->E is 2 (A->B->E)

also, A->F & A->G is 2

So, now instead of 1 distance between nodes, if it is 6, then just multiply the answer by 6
example,
if distance between each is 1, then A->E is 2 (A->B->E = 1+1)
if distance between each is 6, then A->E is 12 (A->B->E = 6+6)

yes, bfs may take any path
but we are calculating for all paths

if you have to go from A to Z, then we travel all paths from A to an intermediate I, and since there will be many paths we discard all but shortest path till I, then continue with shortest path ahead to next node J
again if there are multiple paths from I to J, we only take shortest one
example,
assume,
A -> I we have distance 5
(STEP) assume, I -> J we have multiple paths, of distances 7 & 8, since 7 is shortest
we take A -> J as 5 (A->I shortest) + 8 (shortest now) = 13
so A->J is now 13
we repeat now above (STEP) for J -> K and so on, till we get to Z

Read this part, 2 or 3 times, and draw on paper, you will surely get what i am saying, best of luck

The tomcat manual says:

Copy the web application archive file into directory $CATALINA_HOME/webapps/. When Tomcat is started, it will automatically expand the web application archive file into its unpacked form, and execute the application that way.

#define private public

All the previous posts are correct. There's more than one way to skin a cat. Here is another way to do the same thing: (just replace "what_ever_you_want_to_convert" with your string and run it in Oracle:

    set serveroutput on;
    DECLARE
    v_str VARCHAR2(1000);
    BEGIN
    --Create encoded value
    v_str := utl_encode.text_encode
    ('what_ever_you_want_to_convert','WE8ISO8859P1', UTL_ENCODE.BASE64);
    dbms_output.put_line(v_str);
    --Decode the value..
    v_str := utl_encode.text_decode
    (v_str,'WE8ISO8859P1', UTL_ENCODE.BASE64);
    dbms_output.put_line(v_str);
    END;
    /

source

You don't have to use jQuery. Plain JavaScript will do. I wouldn't recommend any library that ports XML standards onto JavaScript, and I was frustrated that no other solution existed for this so I wrote my own library.

I adapted regex to work with JSON.

First, stringify the JSON object. Then, you need to store the starts and lengths of the matched substrings. For example:

"matched".search("ch") // yields 3

For a JSON string, this works exactly the same (unless you are searching explicitly for commas and curly brackets in which case I'd recommend some prior transform of your JSON object before performing regex (i.e. think :, {, }).

Next, you need to reconstruct the JSON object. The algorithm I authored does this by detecting JSON syntax by recursively going backwards from the match index. For instance, the pseudo code might look as follows:

find the next key preceding the match index, call this theKey
then find the number of all occurrences of this key preceding theKey, call this theNumber
using the number of occurrences of all keys with same name as theKey up to position of theKey, traverse the object until keys named theKey has been discovered theNumber times
return this object called parentChain

With this information, it is possible to use regex to filter a JSON object to return the key, the value, and the parent object chain.

You can see the library and code I authored at http://json.spiritway.co/

SELECT table1.id 
FROM table1 
LEFT JOIN table2 ON table1.id = table2.user_one
WHERE table2.user_one is NULL

Try this one:

$('body').tooltip({
    selector: '[rel=tooltip]'
});

I use a recursive function to build complex SQL queries. This technique can generally be used to build large strings while maintaining code readability.

# Utility function to recursively resolve SQL statements.
# CAUTION: Use this function carefully, Pass correct SQL parameters {},
# TODO: This should never happen but check for infinite loops
def resolveSQL(sql_seed, sqlparams):
    sql = sql_seed % (sqlparams)
    if sql == sql_seed:
        return ' '.join([x.strip() for x in sql.split()])
    else:
        return resolveSQL(sql, sqlparams)

P.S.: Have a look at the awesome python-sqlparse library to pretty print SQL queries if needed.

Simpler:

ScriptManager.RegisterStartupScript(this.Page, this.Page.GetType(), "DoPostBack", "__doPostBack(sender, e)", true);

You can do it the simple way:

string pathToHTMLFile = @"C:\temp\someFile.html";
string htmlString = File.ReadAllText(pathToHTMLFile);

Or you could stream it in with FileStream/StreamReader:

using (FileStream fs = File.Open(pathToHTMLFile, FileMode.Open, FileAccess.ReadWrite))
{
    using (StreamReader sr = new StreamReader(fs))
    {
        htmlString = sr.ReadToEnd();
    }
}

This latter method allows you to open the file while still permitting others to perform Read/Write operations on the file. I can't imagine an HTML file being very big, but it has the added benefit of streaming the file instead of capturing it as one large chunk like the first method.

It's possible you forgot a sheet1 each time somewhere before the columns.count, or it will count the activesheet columns and not the sheet1's.

Also, shouldn't it be xltoleft instead of xltoright? (Ok it is very late here, but I think I know my right from left) I checked it, you must write xltoleft.

lastColumn = Sheet1.Cells(1, sheet1.Columns.Count).End(xlToleft).Column

Google already published a guide on optimization of PHP and the conclusion was:

No getter and setter Optimizing PHP

And no, you must not use magic methods. For PHP, Magic Method are evil. Why?

1. They are hard to debug.
2. There is a negative performance impact.
3. They require writing more code.

PHP is not Java, C++, or C#. PHP is different and plays with different roles.

I wrote a bash script that should automate the process written by Yakov Fain below. It can be called like ./removeComponent myComponentName This has only been tested with Angular 6

#!/bin/bash
if [ "$#" -ne 1 ]; then
    echo "Input a component to delete"
    exit 1
fi

# finds folder with component name and deletes
find . -type d -name $1 | xargs rm -rf

# removes lines referencing the component from app.module.ts
grep -v $1 app.module.ts > temp
mv temp app.module.ts

componentName=$1
componentName+="Component"

grep -v -i $componentName app.module.ts > temp
mv temp app.module.ts

Use a language that guarantees tail-call optimisation. Or use iteration. Alternatively, get cute with decorators.

Look at how Runtime.getRuntime().exec() passes the String command to the ProcessBuilder. It uses a tokenizer and explodes the command into individual tokens, then invokes exec(String[] cmdarray, ......) which constructs a ProcessBuilder.

If you construct the ProcessBuilder with an array of strings instead of a single one, you'll get to the same result.

The ProcessBuilder constructor takes a String... vararg, so passing the whole command as a single String has the same effect as invoking that command in quotes in a terminal:

shell$ "command with args"

The fully-qualified name is opbtained as follows:

String fqn = YourClass.class.getName();

But you need to read a classpath resource. So use

InputStream in = YourClass.getResourceAsStream("resource.txt");

Converting the String to JsonNode using ObjectMapper object :

ObjectMapper mapper = new ObjectMapper();

// For text string
JsonNode = mapper.readValue(mapper.writeValueAsString("Text-string"), JsonNode.class)

// For Array String
JsonNode = mapper.readValue("[\"Text-Array\"]"), JsonNode.class)

// For Json String 
String json = "{\"id\" : \"1\"}";
ObjectMapper mapper = new ObjectMapper();
JsonFactory factory = mapper.getFactory();
JsonParser jsonParser = factory.createParser(json);
JsonNode node = mapper.readTree(jsonParser);

Check the below links for responsive table:

http://css-tricks.com/responsive-data-tables/

http://zurb.com/playground/responsive-tables

http://zurb.com/playground/projects/responsive-tables/index.html

If you are mocking the behavior (with something like doNothing()) there should really be no need to call to verify*(). That said, here's my stab at re-writing your test method:

@PrepareForTest({InternalUtils.class})
@RunWith(PowerMockRunner.class)
public class InternalServiceTest { //Note the renaming of the test class.
   public void testProcessOrder() {
        //Variables
        InternalService is = new InternalService();
        Order order = mock(Order.class);

        //Mock Behavior
        when(order.isSuccessful()).thenReturn(true);
        mockStatic(Internalutils.class);
        doNothing().when(InternalUtils.class); //This is the preferred way
                                               //to mock static void methods.
        InternalUtils.sendEmail(anyString(), anyString(), anyString(), anyString());

        //Execute
        is.processOrder(order);            

        //Verify
        verifyStatic(InternalUtils.class); //Similar to how you mock static methods
                                           //this is how you verify them.
        InternalUtils.sendEmail(anyString(), anyString(), anyString(), anyString());
   }
}

I grouped into four sections to better highlight what is going on:

1. Variables

I choose to declare any instance variables / method arguments / mock collaborators here. If it is something used in multiple tests, consider making it an instance variable of the test class.

2. Mock Behavior

This is where you define the behavior of all of your mocks. You're setting up return values and expectations here, prior to executing the code under test. Generally speaking, if you set the mock behavior here you wouldn't need to verify the behavior later.

3. Execute

Nothing fancy here; this just kicks off the code being tested. I like to give it its own section to call attention to it.

4. Verify

This is when you call any method starting with verify or assert. After the test is over, you check that the things you wanted to have happen actually did happen. That is the biggest mistake I see with your test method; you attempted to verify the method call before it was ever given a chance to run. Second to that is you never specified which static method you wanted to verify.

Additional Notes

This is mostly personal preference on my part. There is a certain order you need to do things in but within each grouping there is a little wiggle room. This helps me quickly separate out what is happening where.

I also highly recommend going through the examples at the following sites as they are very robust and can help with the majority of the cases you'll need:

• https://github.com/powermock/powermock/wiki/Mockito (PowerMock Overview / Examples)
• http://site.mockito.org/mockito/docs/current/org/mockito/Mockito.html (Mockito Overview / Examples)

From JQuery Documentation

The jqXHR objects returned by $.ajax() as of jQuery 1.5 implement the Promise interface, giving them all the properties, methods, and behavior of a Promise (see Deferred object for more information). These methods take one or more function arguments that are called when the $.ajax() request terminates. This allows you to assign multiple callbacks on a single request, and even to assign callbacks after the request may have completed. (If the request is already complete, the callback is fired immediately.) Available Promise methods of the jqXHR object include:

jqXHR.done(function( data, textStatus, jqXHR ) {});

An alternative construct to the success callback option, refer to deferred.done() for implementation details.

jqXHR.fail(function( jqXHR, textStatus, errorThrown ) {});

An alternative construct to the error callback option, the .fail() method replaces the deprecated .error() method. Refer to deferred.fail() for implementation details.

jqXHR.always(function( data|jqXHR, textStatus, jqXHR|errorThrown ) { }); 

(added in jQuery 1.6) An alternative construct to the complete callback option, the .always() method replaces the deprecated .complete() method.

In response to a successful request, the function's arguments are the same as those of .done(): data, textStatus, and the jqXHR object. For failed requests the arguments are the same as those of .fail(): the jqXHR object, textStatus, and errorThrown. Refer to deferred.always() for implementation details.

jqXHR.then(function( data, textStatus, jqXHR ) {}, function( jqXHR, textStatus, errorThrown ) {});

Incorporates the functionality of the .done() and .fail() methods, allowing (as of jQuery 1.8) the underlying Promise to be manipulated. Refer to deferred.then() for implementation details.

Deprecation Notice: The jqXHR.success(), jqXHR.error(), and jqXHR.complete() callbacks are removed as of jQuery 3.0. You can use jqXHR.done(), jqXHR.fail(), and jqXHR.always() instead.

You can add border to the UIImageView, and then change the size of the UIimageView according to the image size:

#import <QuartzCore/QuartzCore.h>


// adding border to the imageView
[imageView.layer setBorderColor: [[UIColor whiteColor] CGColor]];
[imageView.layer setBorderWidth: 2.0];

// resize the imageView to fit the image size
CGSize size = [image size];
float factor = size.width / self.frame.size.width;
if (factor < size.height / self.frame.size.height) {
    factor = size.height / self.frame.size.height;
}

CGRect rect = CGRectMake(0, 0, size.width/factor, size.height/factor);
imageView.frame = rect;

Make sure you to set the origin of the imageView to the center

The files are using some sort of template engine in which curly braces indicate variables being generated by that templating engine, the files creating such variables must be present elsewhere with the more or less same name as the tpl file name. Here are some of templates engine mostly used.

Smarty

Savant

Tinybutstrong

etc

With smarty being widely used.

Neither of the answers resolved the issue for me. Even after I had installed a new version of Tortoise SVN + Ccleaner.

Seems that there is a folder in AppData\Roaming\Subversion that contains all configuration of Tortoise SVN. You need to delete it all and restart Tortoise SVN.

Hope this helps someone as the ultimate solution.

instead of body type a list of elements you want.

The easiest way to convert an ISO-8859-1 string to UTF-8 string.

private static String convertIsoToUTF8(String example) throws UnsupportedEncodingException {
    return new String(example.getBytes("ISO-8859-1"), "utf-8");
}

If we want to convert an UTF-8 string to ISO-8859-1 string.

private static String convertUTF8ToISO(String example) throws UnsupportedEncodingException {
    return new String(example.getBytes("utf-8"), "ISO-8859-1");
}

Moreover, a method that converts an ISO-8859-1 string to UTF-8 string without using the constructor of class String.

public static String convertISO_to_UTF8_personal(String strISO_8859_1) {
    String res = "";
    int i = 0;
    for (i = 0; i < strISO_8859_1.length() - 1; i++) {
        char ch = strISO_8859_1.charAt(i);
        char chNext = strISO_8859_1.charAt(i + 1);
        if (ch <= 127) {
            res += ch;
        } else if (ch == 194 && chNext >= 128 && chNext <= 191) {
            res += chNext;
        } else if(ch == 195 && chNext >= 128 && chNext <= 191){
            int resNum = chNext + 64;
            res += (char) resNum;
        } else if(ch == 194){
            res += (char) 173;
        } else if(ch == 195){
            res += (char) 224;
        }
    }
    char ch = strISO_8859_1.charAt(i);
    if (ch <= 127 ){
        res += ch;
    }
    return res;
}

}

That method is based on enconding utf-8 to iso-8859-1 of this website. Encoding utf-8 to iso-8859-1

They all do different things, since matplotlib uses a hierarchical order in which a figure window contains a figure which may consist of many axes. Additionally, there are functions from the pyplot interface and there are methods on the Figure class. I will discuss both cases below.

pyplot interface

pyplot is a module that collects a couple of functions that allow matplotlib to be used in a functional manner. I here assume that pyplot has been imported as import matplotlib.pyplot as plt. In this case, there are three different commands that remove stuff:

plt.cla() clears an axes, i.e. the currently active axes in the current figure. It leaves the other axes untouched.

plt.clf() clears the entire current figure with all its axes, but leaves the window opened, such that it may be reused for other plots.

plt.close() closes a window, which will be the current window, if not specified otherwise.

Which functions suits you best depends thus on your use-case.

The close() function furthermore allows one to specify which window should be closed. The argument can either be a number or name given to a window when it was created using figure(number_or_name) or it can be a figure instance fig obtained, i.e., usingfig = figure(). If no argument is given to close(), the currently active window will be closed. Furthermore, there is the syntax close('all'), which closes all figures.

methods of the Figure class

Additionally, the Figure class provides methods for clearing figures. I'll assume in the following that fig is an instance of a Figure:

fig.clf() clears the entire figure. This call is equivalent to plt.clf() only if fig is the current figure.

fig.clear() is a synonym for fig.clf()

Note that even del fig will not close the associated figure window. As far as I know the only way to close a figure window is using plt.close(fig) as described above.

Give full path as input. Avoid relative paths.

 return File.Exists(FinalPath);

How about this:

times['days_since'] = max(list(df.index.values))  
times['days_since'] = times['days_since'] - times['months']  
times

Maybe have a look at this solution: https://codepen.io/quinlo/pen/YONMEa

//pop in the appropriate card icon when detected
cardnumber_mask.on("accept", function () {
    console.log(cardnumber_mask.masked.currentMask.cardtype);
    switch (cardnumber_mask.masked.currentMask.cardtype) {
        case 'american express':
            ccicon.innerHTML = amex;
            ccsingle.innerHTML = amex_single;
            swapColor('green');
            break;
        case 'visa':
            ccicon.innerHTML = visa;
            ccsingle.innerHTML = visa_single;
            swapColor('lime');
            break;
        case 'diners':
            ccicon.innerHTML = diners;
            ccsingle.innerHTML = diners_single;
            swapColor('orange');
            break;
        case 'discover':
            ccicon.innerHTML = discover;
            ccsingle.innerHTML = discover_single;
            swapColor('purple');
            break;
        case ('jcb' || 'jcb15'):
            ccicon.innerHTML = jcb;
            ccsingle.innerHTML = jcb_single;
            swapColor('red');
            break;
        case 'maestro':
            ccicon.innerHTML = maestro;
            ccsingle.innerHTML = maestro_single;
            swapColor('yellow');
            break;
        case 'mastercard':
            ccicon.innerHTML = mastercard;
            ccsingle.innerHTML = mastercard_single;
            swapColor('lightblue');

            break;
        case 'unionpay':
            ccicon.innerHTML = unionpay;
            ccsingle.innerHTML = unionpay_single;
            swapColor('cyan');
            break;
        default:
            ccicon.innerHTML = '';
            ccsingle.innerHTML = '';
            swapColor('grey');
            break;
    }

});

The declaration and initialization

char *array = "One good thing about music";

declares a pointer array and make it point to a constant array of 31 characters.

The declaration and initialization

char array[] = "One, good, thing, about, music";

declares an array of characters, containing 31 characters.

And yes, the size of the arrays is 31, as it includes the terminating '\0' character.

Laid out in memory, it will be something like this for the first:

+-------+     +------------------------------+
| array | --> | "One good thing about music" |
+-------+     +------------------------------+

And like this for the second:

+------------------------------+
| "One good thing about music" |
+------------------------------+

Arrays decays to pointers to the first element of an array. If you have an array like

char array[] = "One, good, thing, about, music";

then using plain array when a pointer is expected, it's the same as &array[0].

That mean that when you, for example, pass an array as an argument to a function it will be passed as a pointer.

Pointers and arrays are almost interchangeable. You can not, for example, use sizeof(pointer) because that returns the size of the actual pointer and not what it points to. Also when you do e.g. &pointer you get the address of the pointer, but &array returns a pointer to the array. It should be noted that &array is very different from array (or its equivalent &array[0]). While both &array and &array[0] point to the same location, the types are different. Using the arrat above, &array is of type char (*)[31], while &array[0] is of type char *.

For more fun: As many knows, it's possible to use array indexing when accessing a pointer. But because arrays decays to pointers it's possible to use some pointer arithmetic with arrays.

For example:

char array[] = "Foobar";  /* Declare an array of 7 characters */

With the above, you can access the fourth element (the 'b' character) using either

array[3]

or

*(array + 3)

And because addition is commutative, the last can also be expressed as

*(3 + array)

which leads to the fun syntax

3[array]

Yes, that is supported.

Check the documentation provided here for the supported keywords inside method names.

You can just define the method in the repository interface without using the @Query annotation and writing your custom query. In your case it would be as followed:

List<Inventory> findByIdIn(List<Long> ids);

I assume that you have the Inventory entity and the InventoryRepository interface. The code in your case should look like this:

The Entity

@Entity
public class Inventory implements Serializable {

  private static final long serialVersionUID = 1L;

  private Long id;

  // other fields
  // getters/setters

}

The Repository

@Repository
@Transactional
public interface InventoryRepository extends PagingAndSortingRepository<Inventory, Long> {

  List<Inventory> findByIdIn(List<Long> ids);

}

It's because the name column on the bar table does not have the UNIQUE constraint.

So imagine you have 2 rows on the bar table that contain the name 'ams' and you insert a row on baz with 'ams' on bar_fk, which row on bar would it be referring since there are two rows matching?

jQuery also has an excellent implementation that's incredibly easy to use. Here's how you could implement this functionality across browsers:

$(document).keypress(function(e){
    var checkWebkitandIE=(e.which==26 ? 1 : 0);
    var checkMoz=(e.which==122 && e.ctrlKey ? 1 : 0);

    if (checkWebkitandIE || checkMoz) $("body").append("<p>ctrl+z detected!</p>");
});

Tested in IE7,Firefox 3.6.3 & Chrome 4.1.249.1064

Another way of doing this is to use the keydown event and track the event.keyCode. However, since jQuery normalizes keyCode and charCode using event.which, their spec recommends using event.which in a variety of situations:

$(document).keydown(function(e){
if (e.keyCode==90 && e.ctrlKey)
    $("body").append("<p>ctrl+z detected!</p>");
});

while running:
    for elem,next_elem in zip(li, li[1:]+[li[0]]):
        ...

This function will return an integer sequence.

const integerRange = (start, end, n = start, arr = []) =>
  (n === end) ? [...arr, n]
    : integerRange(start, end, start < end ? n + 1 : n - 1, [...arr, n]);

$> integerRange(1, 1)
<- Array [ 1 ]

$> integerRange(1, 3)
<- Array(3) [ 1, 2, 3 ]

$> integerRange(3, -3)
<- Array(7) [ 3, 2, 1, 0, -1, -2, -3 ]

In short, the original purpose was to make a field which will be submitted with form's submit. Sometimes, there were need to store some information in hidden field(for example, id of user) and submit it with form's submit.

From HTML September 22, 1995 specification

An INPUT element with `TYPE=HIDDEN' represents a hidden field.The user does not interact with this field; instead, the VALUE attribute specifies the value of the field. The NAME and VALUE attributes are required.

I think the explanation of why exception is thrown is very clear with the answers provided here. I just wish to complement with the way I usually work with these collections. Because, some times, I use the collection more then once and have to test if null every time. To avoid that, I do the following:

    var returnArray = DoSomething() ?? Enumerable.Empty<int>();

    foreach (int i in returnArray)
    {
        // do some more stuff
    }

This way we can use the collection as much as we want without fear the exception and we don't polute the code with excessive conditional statements.

Using the null check operator ?. is also a great approach. But, in case of arrays (like the example in the question), it should be transformed into List before:

    int[] returnArray = DoSomething();

    returnArray?.ToList().ForEach((i) =>
    {
        // do some more stuff
    });

Latecomer to the party here. I'm extremely surprised none of the answers mention the simplest, fastest, most portable solution; the case statement.

case ${variable#[-+]} in
  *[!0-9]* | '') echo Not a number ;;
  * ) echo Valid number ;;
esac

The trimming of any sign before the comparison feels like a bit of a hack, but that makes the expression for the case statement so much simpler.

showing object information in matplotlib statusbar

Features

• no extra libraries needed
• clean plot
• no overlap of labels and artists
• supports multi artist labeling
• can handle artists from different plotting calls (like scatter, plot, add_patch)
• code in library style

Code

### imports
import matplotlib as mpl
import matplotlib.pylab as plt
import numpy as np


# https://stackoverflow.com/a/47166787/7128154
# https://matplotlib.org/3.3.3/api/collections_api.html#matplotlib.collections.PathCollection
# https://matplotlib.org/3.3.3/api/path_api.html#matplotlib.path.Path
# https://stackoverflow.com/questions/15876011/add-information-to-matplotlib-navigation-toolbar-status-bar
# https://stackoverflow.com/questions/36730261/matplotlib-path-contains-point
# https://stackoverflow.com/a/36335048/7128154
class StatusbarHoverManager:
    """
    Manage hover information for mpl.axes.Axes object based on appearing
    artists.

    Attributes
    ----------
    ax : mpl.axes.Axes
        subplot to show status information
    artists : list of mpl.artist.Artist
        elements on the subplot, which react to mouse over
    labels : list (list of strings) or strings
        each element on the top level corresponds to an artist.
        if the artist has items
        (i.e. second return value of contains() has key 'ind'),
        the element has to be of type list.
        otherwise the element if of type string
    cid : to reconnect motion_notify_event
    """
    def __init__(self, ax):
        assert isinstance(ax, mpl.axes.Axes)


        def hover(event):
            if event.inaxes != ax:
                return
            info = 'x={:.2f}, y={:.2f}'.format(event.xdata, event.ydata)
            ax.format_coord = lambda x, y: info
        cid = ax.figure.canvas.mpl_connect("motion_notify_event", hover)

        self.ax = ax
        self.cid = cid
        self.artists = []
        self.labels = []

    def add_artist_labels(self, artist, label):
        if isinstance(artist, list):
            assert len(artist) == 1
            artist = artist[0]

        self.artists += [artist]
        self.labels += [label]

        def hover(event):
            if event.inaxes != self.ax:
                return
            info = 'x={:.2f}, y={:.2f}'.format(event.xdata, event.ydata)
            for aa, artist in enumerate(self.artists):
                cont, dct = artist.contains(event)
                if not cont:
                    continue
                inds = dct.get('ind')
                if inds is not None:  # artist contains items
                    for ii in inds:
                        lbl = self.labels[aa][ii]
                        info += ';   artist [{:d}, {:d}]: {:}'.format(
                            aa, ii, lbl)
                else:
                    lbl = self.labels[aa]
                    info += ';   artist [{:d}]: {:}'.format(aa, lbl)
            self.ax.format_coord = lambda x, y: info

        self.ax.figure.canvas.mpl_disconnect(self.cid)
        self.cid = self.ax.figure.canvas.mpl_connect(
            "motion_notify_event", hover)



def demo_StatusbarHoverManager():
    fig, ax = plt.subplots()
    shm = StatusbarHoverManager(ax)

    poly = mpl.patches.Polygon(
        [[0,0], [3, 5], [5, 4], [6,1]], closed=True, color='green', zorder=0)
    artist = ax.add_patch(poly)
    shm.add_artist_labels(artist, 'polygon')

    artist = ax.scatter([2.5, 1, 2, 3], [6, 1, 1, 7], c='blue', s=10**2)
    lbls = ['point ' + str(ii) for ii in range(4)]
    shm.add_artist_labels(artist, lbls)

    artist = ax.plot(
        [0, 0, 1, 5, 3], [0, 1, 1, 0, 2], marker='o', color='red')
    lbls = ['segment ' + str(ii) for ii in range(5)]
    shm.add_artist_labels(artist, lbls)

    plt.show()


# --- main
if __name__== "__main__":
    demo_StatusbarHoverManager()

For anyone who lands here and all the other solutions did not work give this a try. I am using typescript + react and my problem was that I was associating the files in vscode as javascriptreact not typescriptreact so check your settings for the following entries.

   "files.associations": {
    "*.tsx": "typescriptreact",
    "*.ts": "typescriptreact"
  },

Apologized to post answer for very old thread but i believe my answer may help other.

With the help of delegate the same thing can be achieved.

public class MyClass
{
    private static Action NonStaticDelegate;

    public void NonStaticMethod()
    {
        Console.WriteLine("Non-Static!");
    }

    public static void CaptureDelegate()
    {
        MyClass temp = new MyClass();
        MyClass.NonStaticDelegate = new Action(temp.NonStaticMethod);
    }

    public static void RunNonStaticMethod()
    {
        if (MyClass.NonStaticDelegate != null)
        {
            // This will run the non-static method.
            //  Note that you still needed to create an instance beforehand
            MyClass.NonStaticDelegate();
        }
    }
}

I’ve been struggling with this for a while now. Dycey’s solution is correct in that specifying the src multiple times outputs the same thing in your css file. However, this seems to break in OSX Firefox 23 (probably other versions too, but I don’t have time to test).

The cross-browser @font-face solution from Font Squirrel looks like this:

@font-face {
    font-family: 'fontname';
    src: url('fontname.eot');
    src: url('fontname.eot?#iefix') format('embedded-opentype'),
         url('fontname.woff') format('woff'),
         url('fontname.ttf') format('truetype'),
         url('fontname.svg#fontname') format('svg');
    font-weight: normal;
    font-style: normal;
}

To produce the src property with the comma-separated values, you need to write all of the values on one line, since line-breaks are not supported in Sass. To produce the above declaration, you would write the following Sass:

@font-face
  font-family: 'fontname'
  src: url('fontname.eot')
  src: url('fontname.eot?#iefix') format('embedded-opentype'), url('fontname.woff') format('woff'), url('fontname.ttf') format('truetype'), url('fontname.svg#fontname') format('svg')
  font-weight: normal
  font-style: normal

I think it seems silly to write out the path a bunch of times, and I don’t like overly long lines in my code, so I worked around it by writing this mixin:

=font-face($family, $path, $svg, $weight: normal, $style: normal)
  @font-face
    font-family: $family
    src: url('#{$path}.eot')
    src: url('#{$path}.eot?#iefix') format('embedded-opentype'), url('#{$path}.woff') format('woff'), url('#{$path}.ttf') format('truetype'), url('#{$path}.svg##{$svg}') format('svg')
    font-weight: $weight
    font-style: $style

Usage: For example, I can use the previous mixin to setup up the Frutiger Light font like this:

+font-face('frutigerlight', '../fonts/frutilig-webfont', 'frutigerlight')

On ubuntu you can add this PPA Repository and use it to install python 3.7: https://launchpad.net/~jonathonf/+archive/ubuntu/python-3.7

Or a different PPA that provides several Python versions is Deadsnakes: https://launchpad.net/~deadsnakes/+archive/ubuntu/ppa

See also here: https://askubuntu.com/questions/865554/how-do-i-install-python-3-6-using-apt-get (I know it says 3.6 in the url, but the deadsnakes ppa also contains 3.7 so you can use it for 3.7 just the same)

If you want "official" you'd have to install it from the sources from the site, get the code (which you already downloaded) and do this:

tar -xf Python-3.7.0.tar.xz
cd Python-3.7.0
./configure
make
sudo make install        <-- sudo is required.

This might take a while

For auto reload and clear cache after 3 second you can do it easily using javascript setInterval function. Here is simple code

$(document).ready(function() {_x000D_
  setInterval(function() {_x000D_
    cache_clear()_x000D_
  }, 3000);_x000D_
});_x000D_
_x000D_
function cache_clear() {_x000D_
  window.location.reload(true);_x000D_
  // window.location.reload(); use this if you do not remove cache_x000D_
}

<script src="https://ajax.googleapis.com/ajax/libs/jquery/1.11.0/jquery.min.js"></script>_x000D_
<p>Auto reload page and clear cache</p>

and you can also use meta for this

<meta http-equiv="Refresh" content="5">

If the machine you are on is part of the AD domain, it should have its name servers set to the AD name servers (or hopefully use a DNS server path that will eventually resolve your AD domains). Using your example of dc=domain,dc=com, if you look up domain.com in the AD name servers it will return a list of the IPs of each AD Controller. Example from my company (w/ the domain name changed, but otherwise it's a real example):

    mokey 0 /home/jj33 > nslookup example.ad
    Server:         172.16.2.10
    Address:        172.16.2.10#53

    Non-authoritative answer:
    Name:   example.ad
    Address: 172.16.6.2
    Name:   example.ad
    Address: 172.16.141.160
    Name:   example.ad
    Address: 172.16.7.9
    Name:   example.ad
    Address: 172.19.1.14
    Name:   example.ad
    Address: 172.19.1.3
    Name:   example.ad
    Address: 172.19.1.11
    Name:   example.ad
    Address: 172.16.3.2

Note I'm actually making the query from a non-AD machine, but our unix name servers know to send queries for our AD domain (example.ad) over to the AD DNS servers.

I'm sure there's a super-slick windowsy way to do this, but I like using the DNS method when I need to find the LDAP servers from a non-windows server.

if you are using angularjs you can write your own directive. I had the same problem whith bootstrapSwitch. I have to call $("[name='my-checkbox']").bootstrapSwitch(); in javascript but my html input object was not created at that time. So I write an own directive and create the input element with <input type="checkbox" checkbox-switch>

In the directive I compile the element to get access via javascript an execute the jquery command (like your .combobox() command). Very important is to remove the attribute. Otherwise this directive will call itself and you have build a loop

app.directive("checkboxSwitch", function($compile) {
return {
    link: function($scope, element) {
        var input = element[0];
        input.removeAttribute("checkbox-switch");
        var inputCompiled = $compile(input)($scope.$parent);
        inputCompiled.bootstrapSwitch();
    }
}
});

An another way, you can do it easily with CMD on Windows

Put your installed version (mine is 11).

cd C:\Program Files\PostgreSQL\11\bin\

and run simple query

psql -U <postgre_username> -d <db_name> < <C:\path\data_dump.sql>

enter password then wait the final console message.

To find any file location

1. In windows start menu Search box
2. type in svcutil.exe
3. Wait for results to populate
4. Right click on svcutil.exe and Select 'Open file location'
5. Copy Windows explorer path

sort("ID") does not seem to be working now, seems deprecated as per sort doc, so use sort_values("ID") instead to sort after duplicate filter, as following:

df[df.ID.duplicated(keep=False)].sort_values("ID")

The docs says:

The session-timeout element defines the default session timeout interval for all sessions created in this web application. The specified timeout must be expressed in a whole number of minutes. If the timeout is 0 or less, the container ensures the default behaviour of sessions is never to time out. If this element is not specified, the container must set its default timeout period.

I will add this here in case someone will be as lucky as me.

When reviewing the sp_who2 list of processes note the processes that run not only for the effected database but also for master. In my case the issue that was blocking the database was related to a stored procedure that started a xp_cmdshell.

Check if you have any processes in KILL/RollBack state for master database

SELECT *
FROM sys.sysprocesses
WHERE cmd = 'KILLED/ROLLBACK'

If you have the same issue, just the KILL command will probably not help. You can restarted the SQL server, or better way is to find the cmd.exe under windows processes on SQL server OS and kill it.

I think this what you are expecting...

var currTimestamp = Date.now(), //1482905176396
    utcDateString = (new Date(currTimestamp)).toUTCString(); //"Wed, 28 Dec 2016 06:06:50 GMT"

Now,

new Date(utcDateString).getTime(); //This will give you UTC Timestamp in JavaScript

There is no need to use extra columns or VBA if you only want to add the character for display purposes.

As this post suggests, all you need to do is:

1. Select the cell(s) you would like to apply the formatting to
2. Click on the Home tab
3. Click on Number
4. Select Custom
5. In the Type text box, enter your desired formatting by placing the number zero inside whatever characters you want.

Example of such text for formatting:

• If you want the cell holding value 120.00 to read $120K, type $0K

You must use the global declaration when you wish to alter the value assigned to a global variable.

You do not need it to read from a global variable. Note that calling a method on an object (even if it alters the data within that object) does not alter the value of the variable holding that object (absent reflective magic).

If the path you want is the one to the workbook running the macro, and that workbook has been saved, then

ThisWorkbook.Path

is what you would use.

The correct approach is to use preprocessing

For example

th:field="*{__${myVar}__}"

Spring is a light weight and open source framework created by Rod Johnson in 2003. Spring is a complete and a modular framework, Spring framework can be used for all layer implementations for a real time application or spring can be used for the development of particular layer of a real time application.

Struts is an open-source web application framework for developing Java EE web applications. It uses and extends the Java Servlet API to encourage developers to adopt a model–view–controller (MVC) architecture. It was originally created by Craig McClanahan and donated to the Apache Foundation in May, 2000.

Listed below is the comparison chart of difference between Spring and Strut Framework

try this:

return $this->db->query("
     SELECT * FROM myTable 
     WHERE trans_id IN ( SELECT trans_id FROM myTable WHERE code='B') 
     AND code!='B'
     ")->result_array();

Is not active record but is codeigniter's way http://codeigniter.com/user_guide/database/examples.html see Standard Query With Multiple Results (Array Version) section

You can use eval() for this purpose

>>> url = "'http address'"
>>> eval(url)
'http address'

while eval() poses risk , i think in this context it is safe.

Buttons

Buttons are simple to disable as disabled is a button property which is handled by the browser:

<input type="submit" class="btn" value="My Input Submit" disabled/>
<input type="button" class="btn" value="My Input Button" disabled/>
<button class="btn" disabled>My Button</button>

To disable these with a custom jQuery function, you'd simply make use of fn.extend():

// Disable function
jQuery.fn.extend({
    disable: function(state) {
        return this.each(function() {
            this.disabled = state;
        });
    }
});

// Disabled with:
$('input[type="submit"], input[type="button"], button').disable(true);

// Enabled with:
$('input[type="submit"], input[type="button"], button').disable(false);

JSFiddle disabled button and input demo.

Otherwise you'd make use of jQuery's prop() method:

$('button').prop('disabled', true);
$('button').prop('disabled', false);

Anchor Tags

It's worth noting that disabled isn't a valid property for anchor tags. For this reason, Bootstrap uses the following styling on its .btn elements:

.btn.disabled, .btn[disabled] {
    cursor: default;
    background-image: none;
    opacity: 0.65;
    filter: alpha(opacity=65);
    -webkit-box-shadow: none;
    -moz-box-shadow: none;
    box-shadow: none;
    color: #333;
    background-color: #E6E6E6;
}

Note how the [disabled] property is targeted as well as a .disabled class. The .disabled class is what is needed to make an anchor tag appear disabled.

<a href="http://example.com" class="btn">My Link</a>

Of course, this will not prevent links from functioning when clicked. The above link will take us to http://example.com. To prevent this, we can add in a simple piece of jQuery code to target anchor tags with the disabled class to call event.preventDefault():

$('body').on('click', 'a.disabled', function(event) {
    event.preventDefault();
});

We can toggle the disabled class by using toggleClass():

jQuery.fn.extend({
    disable: function(state) {
        return this.each(function() {
            var $this = $(this);
            $this.toggleClass('disabled', state);
        });
    }
});

// Disabled with:
$('a').disable(true);

// Enabled with:
$('a').disable(false);

JSFiddle disabled link demo.

Combined

We can then extend the previous disable function made above to check the type of element we're attempting to disable using is(). This way we can toggleClass() if it isn't an input or button element, or toggle the disabled property if it is:

// Extended disable function
jQuery.fn.extend({
    disable: function(state) {
        return this.each(function() {
            var $this = $(this);
            if($this.is('input, button, textarea, select'))
              this.disabled = state;
            else
              $this.toggleClass('disabled', state);
        });
    }
});

// Disabled on all:
$('input, button, a').disable(true);

// Enabled on all:
$('input, button, a').disable(false);

Full combined JSFiddle demo.

It's worth further noting that the above function will also work on all input types.

Check Calendar class. It has add method (and some others) to allow time manipulation.

Something like this should work:

Calendar cal = Calendar.getInstance(); // creates calendar
cal.setTime(new Date());               // sets calendar time/date
cal.add(Calendar.HOUR_OF_DAY, 1);      // adds one hour
cal.getTime();                         // returns new date object plus one hour

Check API for more.

You can accomplish using my library Expansive. Also available on nuget here.

It was designed with this as a primary use-case.

Moderate Example (using AppSettings as default source for token expansion)

In app.config:

<configuration>
    <appSettings>
        <add key="Domain" value="mycompany.com"/>
        <add key="ServerName" value="db01.{Domain}"/>
    </appSettings>
    <connectionStrings>
        <add name="Default" connectionString="server={ServerName};uid=uid;pwd=pwd;Initial Catalog=master;" provider="System.Data.SqlClient" />
    </connectionStrings>
</configuration>

Use the .Expand() extension method on the string to be expanded:

var connectionString = ConfigurationManager.ConnectionStrings["Default"].ConnectionString;
connectionString.Expand() // returns "server=db01.mycompany.com;uid=uid;pwd=pwd;Initial Catalog=master;"

or

Use the Dynamic ConfigurationManager wrapper "Config" as follows (Explicit call to Expand() not necessary):

var serverName = Config.AppSettings.ServerName;
// returns "db01.mycompany.com"

var connectionString = Config.ConnectionStrings.Default;
// returns "server=db01.mycompany.com;uid=uid;pwd=pwd;Initial Catalog=master;"

Advanced Example 1 (using AppSettings as default source for token expansion)

In app.config:

<configuration>
    <appSettings>
        <add key="Environment" value="dev"/>
        <add key="Domain" value="mycompany.com"/>
        <add key="UserId" value="uid"/>
        <add key="Password" value="pwd"/>
        <add key="ServerName" value="db01-{Environment}.{Domain}"/>
        <add key="ReportPath" value="\\{ServerName}\SomeFileShare"/>
    </appSettings>
    <connectionStrings>
        <add name="Default" connectionString="server={ServerName};uid={UserId};pwd={Password};Initial Catalog=master;" provider="System.Data.SqlClient" />
    </connectionStrings>
</configuration>

Use the .Expand() extension method on the string to be expanded:

var connectionString = ConfigurationManager.ConnectionStrings["Default"].ConnectionString;
connectionString.Expand() // returns "server=db01-dev.mycompany.com;uid=uid;pwd=pwd;Initial Catalog=master;"

For Subversion 1.7 and above, the server doesn't provide a footer that indicates the server version. But you can run the following command to gain the version from the response headers

$ curl -s -D - http://svn.server.net/svn/repository
HTTP/1.1 401 Authorization Required
Date: Wed, 09 Jan 2013 03:01:43 GMT
Server: Apache/2.2.9 (Unix) DAV/2 SVN/1.7.4

Note that this also works on Subversion servers where you don't have authorization to access.

#pragma mark directives show up in Xcode in the menus for direct access to methods. They have no impact on the program at all.

For example, using it with Xcode 4 will make those items appear directly in the Jump Bar.

There is a special pragma mark - which creates a line.

You're trying to do &(2), &(4) which won't work

#romtest {
  .detailed {
    th {
      &:nth-child(2) {//your styles here}
      &:nth-child(4) {//your styles here}
      &:nth-child(6) {//your styles here}
      }
  }
}

Here's the solution you're looking for:

>>> foos = [1.0, 2.0, 3.0, 4.0, 5.0]
>>> bars = [1, 2, 3]
>>> [(x, bars) for x in foos]
[(1.0, [1, 2, 3]), (2.0, [1, 2, 3]), (3.0, [1, 2, 3]), (4.0, [1, 2, 3]), (5.0, [
1, 2, 3])]

I'd recommend using a list comprehension (the [(x, bars) for x in foos] part) over using map as it avoids the overhead of a function call on every iteration (which can be very significant). If you're just going to use it in a for loop, you'll get better speeds by using a generator comprehension:

>>> y = ((x, bars) for x in foos)
>>> for z in y:
...     print z
...
(1.0, [1, 2, 3])
(2.0, [1, 2, 3])
(3.0, [1, 2, 3])
(4.0, [1, 2, 3])
(5.0, [1, 2, 3])

The difference is that the generator comprehension is lazily loaded.

UPDATE In response to this comment:

Of course you know, that you don't copy bars, all entries are the same bars list. So if you modify any one of them (including original bars), you modify all of them.

I suppose this is a valid point. There are two solutions to this that I can think of. The most efficient is probably something like this:

tbars = tuple(bars)
[(x, tbars) for x in foos]

Since tuples are immutable, this will prevent bars from being modified through the results of this list comprehension (or generator comprehension if you go that route). If you really need to modify each and every one of the results, you can do this:

from copy import copy
[(x, copy(bars)) for x in foos]

However, this can be a bit expensive both in terms of memory usage and in speed, so I'd recommend against it unless you really need to add to each one of them.

Free JarCheck tool here

Its simple, just make sure the data type in your columns are the same. For e.g. I faced the same error, that and an another error:

Error in contrasts<-(*tmp*, value = contr.funs[1 + isOF[nn]]) : contrasts can be applied only to factors with 2 or more levels

So, I went back to my excel file or csv file, set a filter on the variable throwing me an error and checked if the distinct datatypes are the same. And... Oh! it had numbers and strings, so I converted numbers to string and it worked just fine for me.

Probably the best solution is to look at the threeparttable/threeparttablex packages.

What I tried and faster than clonning the repo:

1. pod setup
2. Ctrl +C after creating the master directory
3. Download .zip from https://github.com/CocoaPods/Specs master
4. Copy the content to ~/.cocoapods/repos
5. pod install --no-repo-update in my project folder

After that I finally could see the pods being installed

Good luck!

EDIT: The zip size is 144 MB (Jul 6 2017)

document.querySelectorAll(".your_class_name_here");

That will work in "modern" browsers that implement that method (IE8+).

function ReplaceContentInContainer(selector, content) {
  var nodeList = document.querySelectorAll(selector);
  for (var i = 0, length = nodeList.length; i < length; i++) {
     nodeList[i].innerHTML = content;
  }
}

ReplaceContentInContainer(".theclass", "HELLO WORLD");

If you want to provide support for older browsers, you could load a stand-alone selector engine like Sizzle (4KB mini+gzip) or Peppy (10K mini) and fall back to it if the native querySelector method is not found.

Is it overkill to load a selector engine just so you can get elements with a certain class? Probably. However, the scripts aren't all that big and you will may find the selector engine useful in many other places in your script.

If you could reload this, you might be able to use dtypes argument.

pd.read_csv(..., dtype={'COL_NAME':'str'})

If notepad is already started, you should write:

// import the function in your class
[DllImport ("User32.dll")]
static extern int SetForegroundWindow(IntPtr point);

//...

Process p = Process.GetProcessesByName("notepad").FirstOrDefault();
if (p != null)
{
    IntPtr h = p.MainWindowHandle;
    SetForegroundWindow(h);
    SendKeys.SendWait("k");
}

GetProcessesByName returns an array of processes, so you should get the first one (or find the one you want).

If you want to start notepad and send the key, you should write:

Process p = Process.Start("notepad.exe");
p.WaitForInputIdle();
IntPtr h = p.MainWindowHandle;
SetForegroundWindow(h);
SendKeys.SendWait("k");

The only situation in which the code may not work is when notepad is started as Administrator and your application is not.

For Windows, on the interpreter command line only (not the GUI)! Simply type: (Remember to use proper indentation with python):

import os
def clear():
    os.system('cls')

Every time you type clear() on the shell (command line), it will clear the screen on your shell. If you exit the shell, then you must redo the above to do it again as you open a new Python (command line) shell.

Note: Does not matter what version of Python you are using, explicitly (2.5, 2.7, 3.3 & 3.4).

Changing the current directory is not the way to deal with finding modules in Python.

Rather, see the docs for The Module Search Path for how Python finds which module to import.

Here is a relevant bit from Standard Modules section:

The variable sys.path is a list of strings that determines the interpreter’s search path for modules. It is initialized to a default path taken from the environment variable PYTHONPATH, or from a built-in default if PYTHONPATH is not set. You can modify it using standard list operations:

>>> import sys
>>> sys.path.append('/ufs/guido/lib/python')

In answer your original question about getting and setting the current directory:

>>> help(os.getcwd)

getcwd(...)
    getcwd() -> path

    Return a string representing the current working directory.

>>> help(os.chdir)

chdir(...)
    chdir(path)

    Change the current working directory to the specified path.

You can get a shorter version by using sys.path[0].

os.chdir(sys.path[0])

From http://docs.python.org/library/sys.html#sys.path

As initialized upon program startup, the first item of this list, path[0], is the directory containing the script that was used to invoke the Python interpreter

For databases:

SHOW CREATE DATABASE "DB_NAME_HERE";

In creating a Database (MySQL), default character set/collation is always LATIN, instead that you have selected a different one on initially creating your database

Dynamic Values (oh no! D;)

As npup explains in his answer, a simple css rule will only target the attribute value which means that this doesn't cover the actual value of the html node.

JAVASCRIPT TO THE RESCUE!

• Ugly workaround: http://jsfiddle.net/QmvHL/

Original Answer

Yes it's very possible, using css attribute selectors you can reference input's by their value in this sort of fashion:

input[value="United States"] { color: #F90; }?

• jsFiddle example

from the reference

• [att] Match when the element sets the "att" attribute, whatever the value of the attribute.

• [att=val] Match when the element's "att" attribute value is exactly "val".

• [att~=val] Represents an element with the att attribute whose value is a white space-separated list of words, one of which is exactly "val". If "val" contains white space, it will never represent anything (since the words are separated by spaces). If "val" is the empty string, it will never represent anything either.

• [att|=val] Represents an element with the att attribute, its value either being exactly "val" or beginning with "val" immediately followed by "-" (U+002D). This is primarily intended to allow language subcode matches (e.g., the hreflang attribute on the a element in HTML) as described in BCP 47 ([BCP47]) or its successor. For lang (or xml:lang) language subcode matching, please see the :lang pseudo-class.

• css attribute selectors reference

cPickle comes with the standard library… in python 2.x. You are on python 3.x, so if you want cPickle, you can do this:

>>> import _pickle as cPickle

However, in 3.x, it's easier just to use pickle.

No need to install anything. If something requires cPickle in python 3.x, then that's probably a bug.

A very common problem and I have used google collections and here is my code

public class FindByIdPredicate implements Predicate<IDObject> {

private Long entityId;

public FindByIdPredicate(final Long entityId) {
    this.entityId = entityId;

}

@Override
public boolean apply(final IDObject input) {
    return input.getId().equals(this.entityId);
}

/**
     * Pass in the Collection
 * @param Collection
 * @return IdObject if present or null
 */
public IDObject getEntity(final Collection<? extends IDObject> collection) {

    for (IDObject idObject : collection) {
        if (this.apply(idObject)) {
            return idObject;
        }
    }
    return null;

}

/**
 * @param Set
 * @return IdObject if present or null
 */
@SuppressWarnings("unchecked")
public <T> T getEntity(final Set<? extends IDObject> set) {

    for (IDObject idObject : set) {
        if (this.apply(idObject)) {
            return (T) idObject;
        }
    }
    return null;

}

}

Hope this helps

You're mixing up HTML with XHTML.

Usually a <!DOCTYPE> declaration is used to distinguish between versions of HTMLish languages (in this case, HTML or XHTML).

Different markup languages will behave differently. My favorite example is height:100%. Look at the following in a browser:

XHTML

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">
<head>
  <style type="text/css">
    table { height:100%;background:yellow; }
  </style>
</head>
<body>
  <table>
    <tbody>
      <tr><td>How tall is this?</td></tr>
    </tbody>
  </table>
</body>
</html>

... and compare it to the following: (note the conspicuous lack of a <!DOCTYPE> declaration)

HTML (quirks mode)

<html>
<head>
  <style type="text/css">
    table { height:100%;background:yellow; }
  </style>
</head>
<body>
  <table>
    <tbody>
      <tr><td>How tall is this?</td></tr>
    </tbody>
  </table>
</body>
</html>

You'll notice that the height of the table is drastically different, and the only difference between the 2 documents is the type of markup!

That's nice... now, what does <html xmlns="http://www.w3.org/1999/xhtml"> do?

That doesn't answer your question though. Technically, the xmlns attribute is used by the root element of an XHTML document: (according to Wikipedia)

The root element of an XHTML document must be html, and must contain an xmlns attribute to associate it with the XHTML namespace.

You see, it's important to understand that XHTML isn't HTML but XML - a very different creature. (ok, a kind of different creature) The xmlns attribute is just one of those things the document needs to be valid XML. Why? Because someone working on the standard said so ;) (you can read more about XML namespaces on Wikipedia but I'm omitting that info 'cause it's not actually relevant to your question!)

But then why is <html xmlns="http://www.w3.org/1999/xhtml"> fixing the CSS?

If structuring your document like so... (as you suggest in your comment)

<html xmlns="http://www.w3.org/1999/xhtml">
<!DOCTYPE html>
<html>
<head>
[...]

... is fixing your document, it leads me to believe that you don't know that much about CSS and HTML (no offense!) and that the truth is that without <html xmlns="http://www.w3.org/1999/xhtml"> it's behaving normally and with <html xmlns="http://www.w3.org/1999/xhtml"> it's not - and you just think it is, because you're used to writing invalid HTML and thus working in quirks mode.

The above example I provided is an example of that same problem; most people think height:100% should result in the height of the <table> being the whole window, and that the DOCTYPE is actually breaking their CSS... but that's not really the case; rather, they just don't understand that they need to add a html, body { height:100%; } CSS rule to achieve their desired effect.

ls = [x if (condition) else None for x in ls]

System.exit() can be used to run shutdown hooks before the program quits. This is a convenient way to handle shutdown in bigger programs, where all parts of the program can't (and shouldn't) be aware of each other. Then, if someone wants to quit, he can simply call System.exit(), and the shutdown hooks (if properly set up) take care of doing all necessary shutdown ceremonies such as closing files, releasing resources etc.

"This method never returns normally." means just that the method won't return; once a thread goes there, it won't come back.

Another, maybe more common, way to quit a program is to simply to reach the end of the main method. But if there are any non-daemon threads running, they will not be shut down and thus the JVM will not exit. Thus, if you have any such non-daemon threads, you need some other means (than the shutdown hooks) to shut down all non-daemon threads and release other resources. If there are no other non-daemon threads, returning from main will shut down the JVM and will call the shutdown hooks.

For some reason shutdown hooks seem to be an undervalued and misunderstood mechanism, and people are reinventing the wheel with all kind of proprietary custom hacks to quit their programs. I would encourage using shutdown hooks; it's all there in the standard Runtime that you'll be using anyway.

one could also use a fixed lengths vector and access it with indexing

int Lcs(string a, string b) 
{
    int x = a.size() + 1;
    int y = b.size() + 1;

    vector<vector<int>> L(x, vector<int>(y));

    for (int i = 1; i < x; i++)
    {
        for (int j = 1; j < y; j++)
        {
            L[i][j] = a[i - 1] == b[j - 1] ?
                L[i - 1][j - 1] + 1 :
                max(L[i - 1][j], L[i][j - 1]);
        }
    }

    return L[a.size()][b.size()];
}

wget from a linux box might also be a good option as there are switches to spider and change it's output.

EDIT: wget is also available on Windows: http://gnuwin32.sourceforge.net/packages/wget.htm

Answers above are shown how to remove an array and here is how to pull an object from an array.

Reference: https://docs.mongodb.com/manual/reference/operator/update/pull/

db.survey.update( // select your doc in moongo
    { }, // your query, usually match by _id
    { $pull: { results: { $elemMatch: { score: 8 , item: "B" } } } }, // item(s) to match from array you want to pull/remove
    { multi: true } // set this to true if you want to remove multiple elements.
)

</script> has to be broken up because otherwise it would end the enclosing <script></script> block too early. Really it should be split between the < and the /, because a script block is supposed (according to SGML) to be terminated by any end-tag open (ETAGO) sequence (i.e. </):

Although the STYLE and SCRIPT elements use CDATA for their data model, for these elements, CDATA must be handled differently by user agents. Markup and entities must be treated as raw text and passed to the application as is. The first occurrence of the character sequence "</" (end-tag open delimiter) is treated as terminating the end of the element's content. In valid documents, this would be the end tag for the element.

However in practice browsers only end parsing a CDATA script block on an actual </script> close-tag.

In XHTML there is no such special handling for script blocks, so any < (or &) character inside them must be &escaped; like in any other element. However then browsers that are parsing XHTML as old-school HTML will get confused. There are workarounds involving CDATA blocks, but it's easiest simply to avoid using these characters unescaped. A better way of writing a script element from script that works on either type of parser would be:

<script type="text/javascript">
    document.write('\x3Cscript type="text/javascript" src="foo.js">\x3C/script>');
</script>

To see if a dataframe is empty, I argue that one should test for the length of a dataframe's columns index:

if len(df.columns) == 0: 1

Reason:

According to the Pandas Reference API, there is a distinction between:

• an empty dataframe with 0 rows and 0 columns
• an empty dataframe with rows containing NaN hence at least 1 column

Arguably, they are not the same. The other answers are imprecise in that df.empty, len(df), or len(df.index) make no distinction and return index is 0 and empty is True in both cases.

Examples

Example 1: An empty dataframe with 0 rows and 0 columns

In [1]: import pandas as pd
        df1 = pd.DataFrame()
        df1
Out[1]: Empty DataFrame
        Columns: []
        Index: []

In [2]: len(df1.index)  # or len(df1)
Out[2]: 0

In [3]: df1.empty
Out[3]: True

Example 2: A dataframe which is emptied to 0 rows but still retains n columns

In [4]: df2 = pd.DataFrame({'AA' : [1, 2, 3], 'BB' : [11, 22, 33]})
        df2
Out[4]:    AA  BB
        0   1  11
        1   2  22
        2   3  33

In [5]: df2 = df2[df2['AA'] == 5]
        df2
Out[5]: Empty DataFrame
        Columns: [AA, BB]
        Index: []

In [6]: len(df2.index)  # or len(df2)
Out[6]: 0

In [7]: df2.empty
Out[7]: True

Now, building on the previous examples, in which the index is 0 and empty is True. When reading the length of the columns index for the first loaded dataframe df1, it returns 0 columns to prove that it is indeed empty.

In [8]: len(df1.columns)
Out[8]: 0

In [9]: len(df2.columns)
Out[9]: 2

Critically, while the second dataframe df2 contains no data, it is not completely empty because it returns the amount of empty columns that persist.

Why it matters

Let's add a new column to these dataframes to understand the implications:

# As expected, the empty column displays 1 series
In [10]: df1['CC'] = [111, 222, 333]
         df1
Out[10]:    CC
         0 111
         1 222
         2 333
In [11]: len(df1.columns)
Out[11]: 1

# Note the persisting series with rows containing `NaN` values in df2
In [12]: df2['CC'] = [111, 222, 333]
         df2
Out[12]:    AA  BB   CC
         0 NaN NaN  111
         1 NaN NaN  222
         2 NaN NaN  333
In [13]: len(df2.columns)
Out[13]: 3

It is evident that the original columns in df2 have re-surfaced. Therefore, it is prudent to instead read the length of the columns index with len(pandas.core.frame.DataFrame.columns) to see if a dataframe is empty.

Practical solution

# New dataframe df
In [1]: df = pd.DataFrame({'AA' : [1, 2, 3], 'BB' : [11, 22, 33]})
        df
Out[1]:    AA  BB
        0   1  11
        1   2  22
        2   3  33

# This data manipulation approach results in an empty df
# because of a subset of values that are not available (`NaN`)
In [2]: df = df[df['AA'] == 5]
        df
Out[2]: Empty DataFrame
        Columns: [AA, BB]
        Index: []

# NOTE: the df is empty, BUT the columns are persistent
In [3]: len(df.columns)
Out[3]: 2

# And accordingly, the other answers on this page
In [4]: len(df.index)  # or len(df)
Out[4]: 0

In [5]: df.empty
Out[5]: True

# SOLUTION: conditionally check for empty columns
In [6]: if len(df.columns) != 0:  # <--- here
            # Do something, e.g. 
            # drop any columns containing rows with `NaN`
            # to make the df really empty
            df = df.dropna(how='all', axis=1)
        df
Out[6]: Empty DataFrame
        Columns: []
        Index: []

# Testing shows it is indeed empty now
In [7]: len(df.columns)
Out[7]: 0

Adding a new data series works as expected without the re-surfacing of empty columns (factually, without any series that were containing rows with only NaN):

In [8]: df['CC'] = [111, 222, 333]
         df
Out[8]:    CC
         0 111
         1 222
         2 333
In [9]: len(df.columns)
Out[9]: 1

There are 3 steps to remove index.php.

1. Make below changes in application/config.php file

   $config['base_url'] = 'http://'.$_SERVER['SERVER_NAME'].'/Your Ci folder_name';
   $config['index_page'] = '';
   $config['uri_protocol'] = 'AUTO';
   

2. Make .htaccess file in your root directory using below code

   RewriteEngine on
   RewriteCond $1 !^(index\.php|resources|robots\.txt)
   RewriteCond %{REQUEST_FILENAME} !-f
   RewriteCond %{REQUEST_FILENAME} !-d
   RewriteRule ^(.*)$ index.php/$1 [L,QSA]
   

3. Enable the rewrite engine (if not already enabled)

   i. First, initiate it with the following command:

   a2enmod rewrite
   

   ii. Edit the file /etc/apache2/sites-enabled/000-default

   Change all AllowOverride None to AllowOverride All.

   Note: In latest version you need to change in /etc/apache2/apache2.conf file

   iii. Restart your server with the following command:

   sudo /etc/init.d/apache2 restart
   

Not the most efficient one, but by far the most obvious way to do it is:

>>> a = [1, 2, 3, 4, 5]
>>> b = [9, 8, 7, 6, 5]
>>> set(a) & set(b)
{5}

if order is significant you can do it with list comprehensions like this:

>>> [i for i, j in zip(a, b) if i == j]
[5]

(only works for equal-sized lists, which order-significance implies).

Following code will be more helpful to compare two JsonObject, JsonArray, JsonPrimitive and JasonElements.

private boolean compareJson(JsonElement json1, JsonElement json2) {
        boolean isEqual = true;
        // Check whether both jsonElement are not null
        if (json1 != null && json2 != null) {

            // Check whether both jsonElement are objects
            if (json1.isJsonObject() && json2.isJsonObject()) {
                Set<Entry<String, JsonElement>> ens1 = ((JsonObject) json1).entrySet();
                Set<Entry<String, JsonElement>> ens2 = ((JsonObject) json2).entrySet();
                JsonObject json2obj = (JsonObject) json2;
                if (ens1 != null && ens2 != null) {
                    // (ens2.size() == ens1.size())
                    // Iterate JSON Elements with Key values
                    for (Entry<String, JsonElement> en : ens1) {
                        isEqual = isEqual && compareJson(en.getValue(), json2obj.get(en.getKey()));
                    }
                } else {
                    return false;
                }
            }

            // Check whether both jsonElement are arrays
            else if (json1.isJsonArray() && json2.isJsonArray()) {
                JsonArray jarr1 = json1.getAsJsonArray();
                JsonArray jarr2 = json2.getAsJsonArray();
                if (jarr1.size() != jarr2.size()) {
                    return false;
                } else {
                    int i = 0;
                    // Iterate JSON Array to JSON Elements
                    for (JsonElement je : jarr1) {
                        isEqual = isEqual && compareJson(je, jarr2.get(i));
                        i++;
                    }
                }
            }

            // Check whether both jsonElement are null
            else if (json1.isJsonNull() && json2.isJsonNull()) {
                return true;
            }

            // Check whether both jsonElement are primitives
            else if (json1.isJsonPrimitive() && json2.isJsonPrimitive()) {
                if (json1.equals(json2)) {
                    return true;
                } else {
                    return false;
                }
            } else {
                return false;
            }
        } else if (json1 == null && json2 == null) {
            return true;
        } else {
            return false;
        }
        return isEqual;
    }

Google recommend that you don't use any of them, source.

There is no need to use entity references like &mdash, &rdquo, or &#x263a, assuming the same encoding (UTF-8) is used for files and editors as well as among teams.

Is there a reason you can't simply use "?

don't have to use grep either

an example:

sed -n '/searchwords/{s/^\(.\{12\}\).*/\1/g;p}' file

In my experience, it's just a matter of iteration. Put your data and code wherever you think they go. Chances are, you'll be wrong anyway. But once you get a better idea of exactly how things are going to shape up, you're in a much better position to make these kinds of guesses.

As far as extension sources, we have a Code directory under trunk that contains a directory for python and a directory for various other languages. Personally, I'm more inclined to try putting any extension code into its own repository next time around.

With that said, I go back to my initial point: don't make too big a deal out of it. Put it somewhere that seems to work for you. If you find something that doesn't work, it can (and should) be changed.

I know similar code that the OP posted in this question from generic parsers. From a performance perspective, you should use Unsafe.As<TFrom, TResult>(ref TFrom source), which can be found in the System.Runtime.CompilerServices.Unsafe NuGet package. It avoids boxing for value types in these scenarios. I also think that Unsafe.As results in less machine code produced by the JIT than casting twice (using (TResult) (object) actualString), but I haven't checked that out.

public TResult ParseSomething<TResult>(ParseContext context)
{
    if (typeof(TResult) == typeof(string))
    {
        var token = context.ParseNextToken();
        string parsedString = token.ParseToDotnetString();
        return Unsafe.As<string, TResult>(ref parsedString);
    }
    else if (typeof(TResult) == typeof(int))
    {
        var token = context.ParseNextToken();
        int parsedInt32 = token.ParseToDotnetInt32();
        // This will not box which might be critical to performance
        return Unsafe.As<int, TResult>(ref parsedInt32); 
    }
    // other cases omitted for brevity's sake
}

Unsafe.As will be replaced by the JIT with efficient machine code instructions, as you can see in the official CoreFX repo:

Update: As suggested by a commenter (additional credit to How can I disable the spell checker on text inputs on the iPhone), use this to handle all desktop and mobile browsers.

<tag autocomplete="off" autocorrect="off" autocapitalize="off" spellcheck="false"/>

Original answer: Javascript cannot override user settings, so unless you use another mechanism other than textfields, this is not (or shouldn't be) possible.

You asked:

wouldn't it be easier to just accept JSON object through normal $_POST and then respond in JSON as well

From the Wikipedia on REST:

RESTful applications maximize the use of the pre-existing, well-defined interface and other built-in capabilities provided by the chosen network protocol, and minimize the addition of new application-specific features on top of it

From what (little) I've seen, I believe this is usually accomplished by maximizing the use of existing HTTP verbs, and designing a URL scheme for your service that is as powerful and self-evident as possible.

Custom data protocols (even if they are built on top of standard ones, such as SOAP or JSON) are discouraged, and should be minimized to best conform to the REST ideology.

SOAP RPC over HTTP, on the other hand, encourages each application designer to define a new and arbitrary vocabulary of nouns and verbs (for example getUsers(), savePurchaseOrder(...)), usually overlaid onto the HTTP 'POST' verb. This disregards many of HTTP's existing capabilities such as authentication, caching and content type negotiation, and may leave the application designer re-inventing many of these features within the new vocabulary.

The actual objects you are working with can be in any format. The idea is to reuse as much of HTTP as possible to expose your operations the user wants to perform on those resource (queries, state management/mutation, deletion).

You asked:

Am I missing something?

There is a lot more to know about REST and the URI syntax/HTTP verbs themselves. For example, some of the verbs are idempotent, others aren't. I didn't see anything about this in your question, so I didn't bother trying to dive into it. The other answers and Wikipedia both have a lot of good information.

Also, there is a lot to learn about the various network technologies built on top of HTTP that you can take advantage of if you're using a truly restful API. I'd start with authentication.

• Hit F12 to open Dev Tools
• Click the Sources tab
• On right-hand side, scroll down to "Event Listener Breakpoints", and expand tree
• Click on the events you want to listen for.
• Interact with the target element, if they fire you will get a break point in the debugger

Similarly, you can right click on the target element -> select "inspect element" Scroll down on the right side of the dev frame, at the bottom is 'event listeners'. Expand the tree to see what events are attached to the element. Not sure if this works for events that are handled through bubbling (I'm guessing not)

Another way of doing that, which can make sense depending on your server architecture/framework of choice, is to repeat the same argument over and over again. Something like this:

/appointments?users=id1&users=id2

In this case I recommend using the parameter name in singular:

/appointments?user=id1&user=id2

This is supported natively by frameworks such as Jersey (for Java). Take a look on this question for more details.

myList[0] gets the first item in the list. Since the list is empty there is no item to get and you get the IndexOutOfRangeException instead.

As other answers here have shown, in order to check if the list is empty you need to get the number of elements in the list (myList.Count) or use the LINQ method .Any() which will return true if there are any elements in the list.

One more option - mod_qos

Not simple to configure - but powerful.

http://opensource.adnovum.ch/mod_qos/

I don't think what your asking is possible.

See: Hover Item with JQuery

Basically, adding a class is the only way to accomplish this that I am aware of.

Probably it is belated answer, but I want to share with my findings. I found 2 new approaches to this problem that I have not found here in the answers:

Inner border through box-shadow css property

Yes, box-shadow is used to add box-shadows to the elements. But you can specify inset shadow, that would look like a inner border rather like a shadow. You just need to set horizontal and vertical shadows to 0px, and the "spread" property of the box-shadow to the width of the border you want to have. So for the 'inner' border of 10px you would write the following:

div{
    width:100px;
    height:100px;
    background-color:yellow;
    box-shadow:0px 0px 0px 10px black inset;
    margin-bottom:20px;
}

Here is jsFiddle example that illustrates the difference between box-shadow border and 'normal' border. This way your border and the box width are of total 100px including the border.

More about box-shadow:here

Border through outline css property

Here is another approach, but this way the border would be outside of the box. Here is an example. As follows from the example, you can use css outline property, to set the border that does not affect the width and height of the element. This way, the border width is not added to the width of an element.

div{
   width:100px;
   height:100px;
   background-color:yellow;
   outline:10px solid black;
}

More about outline: here

Add 24*3600 which is the number of seconds in 24Hours

Use workbench.editor.enablePreview: false to disable Preview mode completely.

Use workbench.editor.enablePreviewFromQuickOpen: false to disable Preview mode for the files open from quick open menu.

 //How to start another application from the current application
 Process runProg = new Process();
 runProg.StartInfo.FileName = pathToFile; //the path of the application
 runProg.StartInfo.Arguments = genArgs; //any arguments you want to pass
 runProg.StartInfo.CreateNoWindow = true;
 runProg.Start();

 //How to end the same application from the current application
 int IDstring = System.Convert.ToInt32(runProg.Id.ToString());
 Process tempProc = Process.GetProcessById(IDstring);
 tempProc.CloseMainWindow();
 tempProc.WaitForExit();

You can implement the interface with a class, then you can deal with initializing the members in the constructor:

class IXClass implements IX {
    a: string;
    b: any;
    c: AnotherType;

    constructor(obj: IX);
    constructor(a: string, b: any, c: AnotherType);
    constructor() {
        if (arguments.length == 1) {
            this.a = arguments[0].a;
            this.b = arguments[0].b;
            this.c = arguments[0].c;
        } else {
            this.a = arguments[0];
            this.b = arguments[1];
            this.c = arguments[2];
        }
    }
}

Another approach is to use a factory function:

function ixFactory(a: string, b: any, c: AnotherType): IX {
    return {
        a: a,
        b: b,
        c: c
    }
}

Then you can simply:

var ix: IX = null;
...

ix = new IXClass(...);
// or
ix = ixFactory(...);

Assuming one has installed a JDK in /opt/java/jdk1.8.0_144 then:

1. Install the alternative for javac

   $ sudo update-alternatives --install /usr/bin/javac javac /opt/java/jdk1.8.0_144/bin/javac 1
   

2. Check / update the alternatives config:

   $ sudo update-alternatives --config javac
   

If there is only a single alternative for javac you will get a message saying so, otherwise select the option for the new JDK.

To check everything is setup correctly then:

$ which javac
/usr/bin/javac

$ ls -l /usr/bin/javac
lrwxrwxrwx 1 root root 23 Sep  4 17:10 /usr/bin/javac -> /etc/alternatives/javac

$ ls -l /etc/alternatives/javac
lrwxrwxrwx 1 root root 32 Sep  4 17:10 /etc/alternatives/javac -> /opt/java/jdk1.8.0_144/bin/javac

And finally

$ javac -version
javac 1.8.0_144

Repeat for java, keytool, jar, etc as needed.

/*

If your delimiters are slash-based, escape it:

\/*

* means "0 or more of the previous repeatable pattern", which can be a single character, a character class or a group.

This is the right way to execute a .jar, and whatever one class in that .jar should have main() and the following are the parameters to it :

java -DLB="uk" -DType="CLIENT_IND" -jar com.fbi.rrm.rrm-batchy-1.5.jar

Another alternative would be to specify the list of libraries twice:

gcc prog.o libA.a libB.a libA.a libB.a -o prog.x

Doing this, you don't have to bother with the right sequence since the reference will be resolved in the second block.

The right answer is : $("#videoContainer")[0].pause();

From High Performance Android Apps book (page 157):

• what we see is equivalent of adb shell dumpsys cpuinfo command
• Numbers are showing CPU load over 1 minute, 5 minutes and 15 minutes (from the left)
• Colors are showing time spent by CPU in user space (green), kernel (red) and IO interrupt (blue)

You can do this too

Before you use this you must declare the DB facade in the controller Simply put this line for that

use Illuminate\Support\Facades\DB;

Now you can get a row using this

$getUserByEmail = DB::table('users')->where('email', $email)->first();

or by this too

$getUserByEmail = DB::select('SELECT * FROM users WHERE email = ?' , ['[email protected]']);

This one returns an array with only one item in it and while the first one returns an object. Keep that in mind.

Hope this helps.

-Go to the DESIGN part in activity_main.xml -In the drag drop pallet select appCompactivity -In appCompactivity Select RecyclerView -On Selection a dialog shall appear click OK -Your project app:gradle will automatically get updated

Try this:

return( (str).Remove(str.Length-1) );

You can parse the output of ifconfig

Logical nullish assignment, ES2020+ solution

New operators are currently being added to the browsers, ??=, ||=, and &&=. This post will focus on ??=.

This checks if left side is undefined or null, short-circuiting if already defined. If not, the right-side is assigned to the left-side variable.

Comparing Methods

// Using ??=
name ??= "Dave"

// Previously, ES2020
name = name ?? "Dave"

// Before that (not equivalent, but commonly used)
name = name || "Dave" // name ||= "Dave"

Basic Examples

let a       // undefined
let b = null
let c = false

a ??= true  // true
b ??= true  // true
c ??= true  // false

// Equivalent to
a = a ?? true

Object/Array Examples

let x = ["foo"]
let y = { foo: "fizz" }

x[0] ??= "bar"  // "foo"
x[1] ??= "bar"  // "bar"

y.foo ??= "buzz"  // "fizz"
y.bar ??= "buzz"  // "buzz"

x  // Array [ "foo", "bar" ]
y  // Object { foo: "fizz", bar: "buzz" }

??= Browser Support Jan 2021 - 81%

??= Mozilla Documentation

||= Mozilla Documentation

&&= Mozilla Documentation

I am going to be general and not specific to Java as DAO and ORM are used in all languages.

To understand DAO you first need to understand ORM (Object Relational Mapping). This means that if you have a table called "person" with columns "name" and "age", then you would create object-template for that table:

type Person {
name
age
}

Now with help of DAO instead of writing some specific queries, to fetch all persons, for what ever type of db you are using (which can be error-prone) instead you do:

list persons = DAO.getPersons();
...
person = DAO.getPersonWithName("John");
age = person.age;

You do not write the DAO abstraction yourself, instead it is usually part of some opensource project, depending on what language and framework you are using.

Now to the main question here. "..where it is used..". Well usually if you are writing complex business and domain specific code your life will be very difficult without DAO. Of course you do not need to use ORM and DAO provided, instead you can write your own abstraction and native queries. I have done that in the past and almost always regretted it later.

This only worked right for me when including strip.white = TRUE in the read.csv command.

(I found the solution here.)

pFile = fopen("file", "r");
fseek (pFile, 0, SEEK_END);
size=ftell (pFile);
if (size) {
  fseek(pFile, 0, SEEK_SET);
  do something...
}

fclose(pFile)

There is no keyboard shortcut for restoring the perspective directly AFAIK. To open the Window menu (where Reset Perspective resides), try Alt-W. If that does not work, I guess your Eclipse has hung for some reason. Another shortcut you might want to try is F10 (should open the main menu).

From the Java interface design FAQ by Philip Shaw:

Interface variables are static because Java interfaces cannot be instantiated in their own right; the value of the variable must be assigned in a static context in which no instance exists. The final modifier ensures the value assigned to the interface variable is a true constant that cannot be re-assigned by program code.

source

The answer for me was to also add this to my build.gradle file:

configurations.all {
  resolutionStrategy.eachDependency { details ->
      if (details.requested.group == 'com.android.support'
              && !details.requested.name.contains('multidex') ) {
          details.useVersion "26.1.0"
      }
  }
}

In my case, it was nessisary to enclose the resolution strategy in a configurations.all { .. } block. I placed the configurations.all block directly into my app/build.gradle file (ie configurations.all was not nested in anything else)

Another small tip: when going the batch file route, I like to be able to abort it in case I run it accidentally. So the batch file invokes the shutdown but leaves you at the command prompt afterwards.

@echo off
echo Shutting down in 10 seconds. Please type "shutdown /a" to abort.
cmd.exe /K shutdown /f /t 10 /r

Plus, since it's on a timer, you get about the same thrill as you do when hunting in The Oregon Trail.

I've found all solutions above can produce a false positive if a package is installed and then removed yet the installation package remains on the system.

To replicate: Install package apt-get install curl
Remove package apt-get remove curl

Now test above answers.

The following command seems to solve this condition:
dpkg-query -W -f='${Status}\n' curl | head -n1 | awk '{print $3;}' | grep -q '^installed$'

This will result in a definitive installed or not-installed

Renaming a column in MySQL :

ALTER TABLE mytable CHANGE current_column_name new_column_name DATATYPE;

If you use System.Diagnostics.Debug.WriteLine(...) instead of Console.WriteLine(), then you can see the results in the Output window of Visual Studio.

I use the following code to get the IMEI or use Secure.ANDROID_ID as an alternative, when the device doesn't have phone capabilities:

/**
 * Returns the unique identifier for the device
 *
 * @return unique identifier for the device
 */
public String getDeviceIMEI() {
    String deviceUniqueIdentifier = null;
    TelephonyManager tm = (TelephonyManager) this.getSystemService(Context.TELEPHONY_SERVICE);
    if (null != tm) {
        deviceUniqueIdentifier = tm.getDeviceId();
    }
    if (null == deviceUniqueIdentifier || 0 == deviceUniqueIdentifier.length()) {
        deviceUniqueIdentifier = Settings.Secure.getString(this.getContentResolver(), Settings.Secure.ANDROID_ID);
    }
    return deviceUniqueIdentifier;
}

Python lacks the tail recursion optimizations common in functional languages like lisp. In Python, recursion is limited to 999 calls (see sys.getrecursionlimit).

If 999 depth is more than you are expecting, check if the implementation lacks a condition that stops recursion, or if this test may be wrong for some cases.

I dare to say that in Python, pure recursive algorithm implementations are not correct/safe. A fib() implementation limited to 999 is not really correct. It is always possible to convert recursive into iterative, and doing so is trivial.

It is not reached often because in many recursive algorithms the depth tend to be logarithmic. If it is not the case with your algorithm and you expect recursion deeper than 999 calls you have two options:

1) You can change the recursion limit with sys.setrecursionlimit(n) until the maximum allowed for your platform:

sys.setrecursionlimit(limit):

Set the maximum depth of the Python interpreter stack to limit. This limit prevents infinite recursion from causing an overflow of the C stack and crashing Python.

The highest possible limit is platform-dependent. A user may need to set the limit higher when she has a program that requires deep recursion and a platform that supports a higher limit. This should be done with care, because a too-high limit can lead to a crash.

2) You can try to convert the algorithm from recursive to iterative. If recursion depth is bigger than allowed by your platform, it is the only way to fix the problem. There are step by step instructions on the Internet and it should be a straightforward operation for someone with some CS education. If you are having trouble with that, post a new question so we can help.

I just figured it out below:

$(".notice")
   .fadeIn( function() 
   {
      setTimeout( function()
      {
         $(".notice").fadeOut("fast");
      }, 2000);
   });

I will keep the post for other users!

In the html file there are three input boxes with userid,username,department respectively.

These inputboxes are used to get the input from the user.

The user can add any number of inputs to the page.

When clicking the button the script will enable the debugger mode.

In javascript, to enable the debugger mode, we have to add the following tag in the javascript.

/************************************************************************\

    Tools->Internet Options-->Advanced-->uncheck
    Disable script debugging(Internet Explorer)
    Disable script debugging(Other)

    <html xmlns="http://www.w3.org/1999/xhtml" >

    <head runat="server">

    <title>Dynamic Table</title>

    <script language="javascript" type="text/javascript">

    // <!CDATA[

    function CmdAdd_onclick() {

    var newTable,startTag,endTag;



    //Creating a new table

    startTag="<TABLE id='mainTable'><TBODY><TR><TD style=\"WIDTH: 120px\">User ID</TD>
    <TD style=\"WIDTH: 120px\">User Name</TD><TD style=\"WIDTH: 120px\">Department</TD></TR>"

    endTag="</TBODY></TABLE>"

    newTable=startTag;

    var trContents;

    //Get the row contents

    trContents=document.body.getElementsByTagName('TR');

    if(trContents.length>1)

    {

    for(i=1;i<trContents.length;i++)

    {

    if(trContents(i).innerHTML)

    {

    // Add previous rows

    newTable+="<TR>";

    newTable+=trContents(i).innerHTML;

    newTable+="</TR>";

    } 

    }

    }

    //Add the Latest row

    newTable+="<TR><TD style=\"WIDTH: 120px\" >" +
        document.getElementById('userid').value +"</TD>";

    newTable+="<TD style=\"WIDTH: 120px\" >" +
        document.getElementById('username').value +"</TD>";

    newTable+="<TD style=\"WIDTH: 120px\" >" +
        document.getElementById('department').value +"</TD><TR>";

    newTable+=endTag;

    //Update the Previous Table With New Table.

    document.getElementById('tableDiv').innerHTML=newTable;

    }

    // ]]>

    </script>

    </head>

    <body>

    <form id="form1" runat="server">

    <div>

    <br />

    <label>UserID</label> 

    <input id="userid" type="text" /><br />

    <label>UserName</label> 

    <input id="username" type="text" /><br />

    <label>Department</label> 

    <input id="department" type="text" />

    <center>

    <input id="CmdAdd" type="button" value="Add" onclick="return CmdAdd_onclick()" />
    </center>



    </div>

    <div id="tableDiv" style="text-align:center" >

    <table id="mainTable">

    <tr style="width:120px " >

    <td >User ID</td>

    <td>User Name</td>

    <td>Department</td>

    </tr>

    </table>

    </div>

    </form>

    </body>

    </html>

Simple!

System.IO.File.WriteAllText(path, text, Encoding.GetEncoding(28591));

Create an anchor:

<a name="anchor" id="anchor"></a> 

then link to it:

<a href="http://server/page.html#anchor">Link text</a>

Using Altair.

from altair import *
import pandas as pd

df = datasets.load_dataset('iris')
Chart(df).mark_point().encode(x='petalLength',y='sepalLength', color='species')

I created a project, JAR_Runnr, for precisely this. =)

http://projects.killerapplets.com/JAR_Runner/

Try

data _null_; 
   monyy = '05May2013'; 
   date = input(substr(strip(monyy),1,9),date9.);
   put date=date9.; 
   run;

Try using Environment.NewLine:

Gets the newline string defined for this environment.

Something like this ought to work:

textBox.AppendText("your new text" & Environment.NewLine)

The unload() method was deprecated in jQuery version 1.8.

so if you are using versions older than 1.8

then use -

$(window).unload(function(){
alert("Goodbye!");
});

and if you are using 1.8 and higher

then use -

window.onbeforeunload = function() {
    return "Bye now!";
};

hope this will work :-)

I think you're looking for sys.path

import sys
print (sys.path)

If you are working RESTfully, GET should be used for requests where you are only getting data, and POST should be used for requests where you are making something happen.

Some examples:

• GET the page showing a particular SO question

• POST a comment

• Send a POST request by clicking the "Add to cart" button.

ASP.NET Core

Routing is configured in the Configure method of the Startup class. To set the "homepage" simply add the following. This will cause users to be routed to the controller and action defined in the MapRoute method when/if they navigate to your site’s base URL, i.e., yoursite.com will route users to yoursite.com/foo/index:

app.UseMvc(routes =>
{
   routes.MapRoute(
   name: "default",
   template: "{controller=FooController}/{action=Index}/{id?}");
});

Pre-ASP.NET Core

Use the RegisterRoutes method located in either App_Start/RouteConfig.cs (MVC 3 and 4) or Global.asax.cs (MVC 1 and 2) as shown below. This will cause users to be routed to the controller and action defined in the MapRoute method if they navigate to your site’s base URL, i.e., yoursite.com will route the user to yoursite.com/foo/index:

public static void RegisterRoutes(RouteCollection routes)
{
    routes.IgnoreRoute("{resource}.axd/{*pathInfo}");

    // Here I have created a custom "Default" route that will route users to the "YourAction" method within the "FooController" controller.
    routes.MapRoute(
        name: "Default",
        url: "{controller}/{action}/{id}",
        defaults: new { controller = "FooController", action = "Index", id = UrlParameter.Optional }
    );
}

This works

    string str = "{ 'context_name': { 'lower_bound': 'value', 'pper_bound': 'value', 'values': [ 'value1', 'valueN' ] } }";
    JavaScriptSerializer j = new JavaScriptSerializer();
    object a = j.Deserialize(str, typeof(object));

Your html is completely wrong for starters, there should not be a div within your head section, nor after your body section. I suggest you look into correct html first before starting to work with favicons etc.

Uses Guava's static factory methods for Maps and is only 105 characters long.

private static final Map<Class<? extends Persistent>, PersistentHelper> class2helper = Maps.newHashMap();

We can use replace to change the values in 'mpg' to NA that corresponds to cyl==4.

mtcars %>%
     mutate(mpg=replace(mpg, cyl==4, NA)) %>%
     as.data.frame()

as far as we want to send all the form input fields which have name attribute, you can do this for all forms, regardless of the field names:

First Solution

function submitForm(form){
    var url = form.attr("action");
    var formData = {};
    $(form).find("input[name]").each(function (index, node) {
        formData[node.name] = node.value;
    });
    $.post(url, formData).done(function (data) {
        alert(data);
    });
}

Second Solution: in this solution you can create an array of input values:

function submitForm(form){
    var url = form.attr("action");
    var formData = $(form).serializeArray();
    $.post(url, formData).done(function (data) {
        alert(data);
    });
}

In my case, I had a OneToOne relation which I was using with @Column by mistake. I changed it to @JoinColumn and added @OneToOne annotation and it fixed the exception.