The #define is part of the preprocessor language for C and C++. When they're used in code, the compiler just replaces the #define statement with what ever you want. For example, if you're sick of writing for (int i=0; i<=10; i++) all the time, you can do the following:

#define fori10 for (int i=0; i<=10; i++)

// some code...

fori10 {
    // do stuff to i
}

If you want something more generic, you can create preprocessor macros:

#define fori(x) for (int i=0; i<=x; i++)
// the x will be replaced by what ever is put into the parenthesis, such as
// 20 here
fori(20) {
    // do more stuff to i
}

It's also very useful for conditional compilation (the other major use for #define) if you only want certain code used in some particular build:

// compile the following if debugging is turned on and defined
#ifdef DEBUG
// some code
#endif

Most compilers will allow you to define a macro from the command line (e.g. g++ -DDEBUG something.cpp), but you can also just put a define in your code like so:

#define DEBUG

Some resources:

1. Wikipedia article
2. C++ specific site
3. Documentation on GCC's preprocessor
4. Microsoft reference
5. C specific site (I don't think it's different from the C++ version though)

The best way to fix this:

Renew the certificate. This can be done for free using Greenlock which issues certificates via Let's Encrypt™ v2

A less insecure way to fix this:

'use strict';

var request = require('request');
var agentOptions;
var agent;

agentOptions = {
  host: 'www.example.com'
, port: '443'
, path: '/'
, rejectUnauthorized: false
};

agent = new https.Agent(agentOptions);

request({
  url: "https://www.example.com/api/endpoint"
, method: 'GET'
, agent: agent
}, function (err, resp, body) {
  // ...
});

By using an agent with rejectUnauthorized you at least limit the security vulnerability to the requests that deal with that one site instead of making your entire node process completely, utterly insecure.

Other Options

If you were using a self-signed cert you would add this option:

agentOptions.ca = [ selfSignedRootCaPemCrtBuffer ];

For trusted-peer connections you would also add these 2 options:

agentOptions.key = clientPemKeyBuffer;
agentOptions.cert = clientPemCrtSignedBySelfSignedRootCaBuffer;

Bad Idea

It's unfortunate that process.env.NODE_TLS_REJECT_UNAUTHORIZED = '0'; is even documented. It should only be used for debugging and should never make it into in sort of code that runs in the wild. Almost every library that runs atop https has a way of passing agent options through. Those that don't should be fixed.

Here is a single line that will create (or overwrite) the file:

File.Create("C:\my files\2010\SomeFileName.txt").Dispose()

Note: calling Dispose() ensures that the reference to the file is closed.

Sometimes you still need to use FirstOrDefault if you have to do different tests. If the Key component of your dictionnary is nullable, you can do this:

thisTag = _tags.FirstOrDefault(t => t.Key.SubString(1,1) == 'a');
if(thisTag.Key != null) { ... }

Using FirstOrDefault, the returned KeyValuePair's key and value will both be null if no match is found.

If you only need two decimal places, simplest way is..

SELECT CAST(12 AS DECIMAL(16,2))

OR

SELECT CAST('12' AS DECIMAL(16,2))

Output

12.00

Perhaps it is late for the party. But there is an alternative solution for this is to use ApiMultipartFormFormatter plugin.

This plugin helps you to receive the multipart/formdata content as ASP.NET Core does.

In the github page, demo is already provided.

I ran in to this error today. Running Win 8.1 and VS 2013. Suddenly my projects could not run anymore and i got the message "Unable to launch the IIS Express Web server" and no further information.

After a while I found out that all the projects that the IIS Express could not start all were running .net 3.5. Projects running later versions did start ok.

The solution for me was to remove .net 3.5 (from control panel -> turn windows features on/off), restart windows and the add .net 3.5 again.

The conflict message:

CONFLICT (delete/modify): res/layout/dialog_item.xml deleted in dialog and modified in HEAD

means that res/layout/dialog_item.xml was deleted in the 'dialog' branch you are merging, but was modified in HEAD (in the branch you are merging to).

So you have to decide whether

• remove file using "git rm res/layout/dialog_item.xml"

or

• accept version from HEAD (perhaps after editing it) with "git add res/layout/dialog_item.xml"

Then you finalize merge with "git commit".

Note that git will warn you that you are creating a merge commit, in the (rare) case where it is something you don't want. Probably remains from the days where said case was less rare.

origin is the default alias to the URL of your remote repository.

The trunc() function truncates a date to the specified time period; so trunc(sysdate,'mm') would return the beginning of the current month. You can then use the add_months() function to get the beginning of the previous month, something like this:

select count(distinct switch_id)   
  from [email protected]  
 where dealer_name =  'XXXX'    
   and creation_date >= add_months(trunc(sysdate,'mm'),-1) 
   and creation_date < trunc(sysdate, 'mm')

As a little side not you're not explicitly converting to a date in your original query. Always do this, either using a date literal, e.g. DATE 2012-08-31, or the to_date() function, for example to_date('2012-08-31','YYYY-MM-DD'). If you don't then you are bound to get this wrong at some point.

You would not use sysdate - 15 as this would provide the date 15 days before the current date, which does not seem to be what you are after. It would also include a time component as you are not using trunc().

Just as a little demonstration of what trunc(<date>,'mm') does:

select sysdate
     , case when trunc(sysdate,'mm') > to_date('20120901 00:00:00','yyyymmdd hh24:mi:ss')
             then 1 end as gt
     , case when trunc(sysdate,'mm') < to_date('20120901 00:00:00','yyyymmdd hh24:mi:ss')
             then 1 end as lt
     , case when trunc(sysdate,'mm') = to_date('20120901 00:00:00','yyyymmdd hh24:mi:ss')
             then 1 end as eq
  from dual
       ;

SYSDATE                   GT         LT         EQ
----------------- ---------- ---------- ----------
20120911 19:58:51                                1

Office 365 use two servers, smtp server and protect extended sever.

First server is smtp.office365.com (property Host of smtp client) and second server is STARTTLS/smtp.office365.com (property TargetName of smtp client). Another thing is must put Usedefaultcredential =false before set networkcredentials.

    client.UseDefaultCredentials = False
    client.Credentials = New NetworkCredential("[email protected]", "Password")
    client.Host = "smtp.office365.com"
    client.EnableSsl = true
    client.TargetName = "STARTTLS/smtp.office365.com"
    client.Port = 587

    client.Send(mail)

If you're running MacOS and have recently upgraded to Catalina, you may need to run brew services restart redis as suggested in this issue.

What I used is

var enviar = document.getElementById("enviar");
enviar.type = "submit"; 

Just because everything else didn´t work.

If you installed ES using the RPM/DEB packages as provided (as you seem to have), you can adjust this by editing the init script (/etc/init.d/elasticsearch on RHEL/CentOS). If you have a look in the file you'll see a block with the following:

export ES_HEAP_SIZE
export ES_HEAP_NEWSIZE
export ES_DIRECT_SIZE
export ES_JAVA_OPTS
export JAVA_HOME

To adjust the size, simply change the ES_HEAP_SIZE line to the following:

export ES_HEAP_SIZE=xM/xG

(where x is the number of MB/GB of RAM that you would like to allocate)

Example:

export ES_HEAP_SIZE=1G

Would allocate 1GB.

Once you have edited the script, save and exit, then restart the service. You can check if it has been correctly set by running the following:

ps aux | grep elasticsearch

And checking for the -Xms and -Xmx flags in the java process that returns:

/usr/bin/java -Xms1G -Xmx1G

Hope this helps :)

Here's a more interesting implementation of multi line lambdas. It's not possible to achieve because of how python use indents as a way to structure code.

But luckily for us, indent formatting can be disabled using arrays and parenthesis.

As some already pointed out, you can write your code as such:

lambda args: (expr1, expr2,... exprN)

In theory if you're guaranteed to have evaluation from left to right it would work but you still lose values being passed from one expression to an other.

One way to achieve that which is a bit more verbose is to have

lambda args: [lambda1, lambda2, ..., lambdaN]

Where each lambda receives arguments from the previous one.

def let(*funcs):
    def wrap(args):
        result = args                                                                                                                                                                                                                         
        for func in funcs:
            if not isinstance(result, tuple):
                result = (result,)
            result = func(*result)
        return result
    return wrap

This method let you write something that is a bit lisp/scheme like.

So you can write things like this:

let(lambda x, y: x+y)((1, 2))

A more complex method could be use to compute the hypotenuse

lst = [(1,2), (2,3)]
result = map(let(
  lambda x, y: (x**2, y**2),
  lambda x, y: (x + y) ** (1/2)
), lst)

This will return a list of scalar numbers so it can be used to reduce multiple values to one.

Having that many lambda is certainly not going to be very efficient but if you're constrained it can be a good way to get something done quickly then rewrite it as an actual function later.

// you need to have a list of data that you want the spinner to display
List<String> spinnerArray =  new ArrayList<String>();
spinnerArray.add("item1");
spinnerArray.add("item2");

ArrayAdapter<String> adapter = new ArrayAdapter<String>(
    this, android.R.layout.simple_spinner_item, spinnerArray);

adapter.setDropDownViewResource(android.R.layout.simple_spinner_dropdown_item);
Spinner sItems = (Spinner) findViewById(R.id.spinner1);
sItems.setAdapter(adapter);

also to find out what is selected you could do something like this

String selected = sItems.getSelectedItem().toString();
if (selected.equals("what ever the option was")) {
}

I'm guessing that you want something like

SELECT tab1.a, tab2.b, tab3.c, tab4.d
  FROM table1 tab1 
       JOIN table2 tab2 ON (tab1.fg = tab2.fg)
       LEFT OUTER JOIN table4 tab4 ON (tab1.ss = tab4.ss)
       LEFT OUTER JOIN table3 tab3 ON (tab4.xya = tab3.xya and tab3.desc = 'XYZ')
       LEFT OUTER JOIN table5 tab5 on (tab4.kk = tab5.kk AND
                                       tab3.dd = tab5.dd)

So, what output does this code produce?

fruits = [ 'apple', 'pear', 'carrot', 'banana' ]

found = False
try:
     for i in range(len(fruit)):
         if fruits[i] == 'apple':
             found = true
except:
     pass

if found:
    print "Found an apple"
else:
    print "No apples in list"

Now imagine the try-except block is hundreds of lines of calls to a complex object hierarchy, and is itself called in the middle of large program's call tree. When the program goes wrong, where do you start looking?

In Rails 3

Adding Rails.env = ActiveSupport::StringInquirer.new('production') into the application.rb and rails s will work same as rails server -e production

module BlacklistAdmin
  class Application < Rails::Application

    config.encoding = "utf-8"
    Rails.env = ActiveSupport::StringInquirer.new('production')

    config.filter_parameters += [:password]
  end
end

I was having same problem and I resolved the issue. Earlier css was overflow:hidden; z-index:999999;

I change it to overflow:visible;

Try below code if you want to use php loop to display

<span>
  <select name="birth_month">
    <?php for( $m=1; $m<=12; ++$m ) { 
      $month_label = date('F', mktime(0, 0, 0, $m, 1));
    ?>
      <option value="<?php echo $month_label; ?>"><?php echo $month_label; ?></option>
    <?php } ?>
  </select> 
</span>
<span>
  <select name="birth_day">
    <?php 
      $start_date = 1;
      $end_date   = 31;
      for( $j=$start_date; $j<=$end_date; $j++ ) {
        echo '<option value='.$j.'>'.$j.'</option>';
      }
    ?>
  </select>
</span>
<span>
  <select name="birth_year">
    <?php 
      $year = date('Y');
      $min = $year - 60;
      $max = $year;
      for( $i=$max; $i>=$min; $i-- ) {
        echo '<option value='.$i.'>'.$i.'</option>';
      }
    ?>
  </select>
</span>

You should be able to simply let PIL get the filetype from extension, i.e. use:

j.save("C:/Users/User/Desktop/mesh_trans.bmp")

Objective-C is not Java. In Objective-C exceptions are what they are called. Exceptions! Don’t use them for error handling. It’s not their proposal. Just check the length of the string before using characterAtIndex and everything is fine....

Epoch time (i.e. Unix Epoch time) is nearly always the number of seconds that have expired since 1st Jan 1970 00:00:00 (UTC time), not the number of milliseconds which some of the answers here have implied.

https://en.wikipedia.org/wiki/Unix_time

Therefore, if you have been given a Unix Epoch time value it will probably be in seconds, and will look something like 1547035195. If you want to make this human readable in JavaScript, you need to convert the value to milliseconds, and pass that value into the Date(value) constructor, e.g.:

const unixEpochTimeMS = 1547035195 * 1000;
const d = new Date(unixEpochTimeMS);
// Careful, the string output here can vary by implementation...
const strDate = d.toLocaleString();

You don't need to do the d.setUTCMilliseconds(0) step in the accepted answer because the JavaScript Date(value) constructor takes a UTC value in milliseconds (not a local time).

https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Date#Syntax

Also note that you should avoid using the Date(...) constructor that takes a string datetime representation, this is not recommended (see the link above).

As a specialisation of Greg's answer, you can even use extended slice syntax. eg. If you wanted to delete items 0 and 2:

>>> a= [0, 1, 2, 3, 4]
>>> del a[0:3:2]
>>> a
[1, 3, 4]

This doesn't cover any arbitrary selection, of course, but it can certainly work for deleting any two items.

Ctrl + Break works, but only if the Build window is active. Also, interrupting the build will sometimes leave a corrupted .obj file that will have to be manually deleted in order for the build to proceed.

While creating setup for www.spotdekho.com in new windows10 machine, I was unable to run command "nodemon web.js" due same error

"Error: Cannot find module '../build/Release/bson'"

Got it fixed by below steps :

1. Create folder "Release" inside "node_modules\bson\build\" location
2. Copy bson.js from "node_modules\bson\browser_build\"
3. Paste bson.js inside "node_modules\bson\build\Release" folder.

This will resolve the issue.

PS : I am using mongoose version 4.8.8 .

Thanks :) , hope it helps someone .

On a mac you have to set keybinding yourself. Simply go to

Sublime --> Preference --> Key Binding - User  

and input the following:

{ "keys": ["shift+command+m"], "command": "goto_definition" }

This will enable keybinding of Shift + Command + M to enable goto definition. You can set the keybinding to anything you would like of course.

event.key === "Delete"

More recent and much cleaner: use event.key. No more arbitrary number codes!

NOTE: The old properties (.keyCode and .which) are Deprecated.

document.addEventListener('keydown', function(event) {
    const key = event.key; // const {key} = event; ES6+
    if (key === "Delete") {
        // Do things
    }
});

Mozilla Docs

Supported Browsers

Declare them before the while loop.

$hn = "";
$pid = "";
$datereg = "";
$prefix = "";
$fname = "";
$lname = "";
$age = "";
$sex = "";

You are getting the notice because the variables are declared and assigned inside the loop.

function isEmptyOrSpaces(str){
    return str === null || str.match(/^[\s\n\r]*$/) !== null;
}

This should work too :

// strPath = "C:\\Dir\\File.bat" for example
std::string getFileName(const std::string& strPath)
{
    size_t iLastSeparator = 0;
    return strPath.substr((iLastSeparator = strPath.find_last_of("\\")) != std::string::npos ? iLastSeparator + 1 : 0, strPath.size() - strPath.find_last_of("."));
}

If you can use it, Qt provide QString (with split, trim etc), QFile, QPath, QFileInfo etc to manipulate files, filenames and directories. And of course it's also cross plaftorm.

Sorry, I solved my problem with the code above:

$("#captureImage").live("change", function() {
    if($("#captureImage:checked").val() !== undefined) {
        navigator.device.capture.captureImage(function(mediaFiles) {
            console.log("works");
        }, function(exception) {
            $("#captureImage").removeAttr('checked').checkboxradio('refresh');
            _callback.error(exception);
        }, {});
    }
});

The widely-used PCRE library can handle such situations (you won't achieve the the same with POSIX-compliant regex engines, though):

(\b\w+\b)\W+\1

The functions have different purposes. vector::insert allows you to insert an object at a specified position in the vector, whereas vector::push_back will just stick the object on the end. See the following example:

using namespace std;
vector<int> v = {1, 3, 4};
v.insert(next(begin(v)), 2);
v.push_back(5);
// v now contains {1, 2, 3, 4, 5}

You can use insert to perform the same job as push_back with v.insert(v.end(), value).

For rounding, you should probably use the C functions defined in math.h.

int roundedX = round(x);

Hold down Option and double click on round in Xcode and it will show you the man page with various functions for rounding different types.

Either you're not including jquery toolkit/lib, as some have suggested, or there is a conflict of sorts. To test: include jQuery and test like this:

console.log($);
console.log($ === jQuery);

If $ is not undefined, and $ === jQuery logs false, you definitely have a conflict on your hands. Replacing your $ with jQuery solves that, but that can be quite tedious (all that extra typing...). Generally I start my scripts with $jq = _$ = jQuery; to at least have a shorter reference to the jQuery object.
Of course, before you do that, check to see if you're not accidentally overriding variables that have been set beforehand: console.log($jq, _jQ, _$); whichever is not undefined should be left alone, of course

I'm using Kotlin here

Just adding the information in here, you can also create readable file outside Private Directory for the apps by doing this example

var teks="your teks"
var NamaFile="Text1.txt"
var strwrt:FileWriter
 strwrt=FileWriter(File("sdcard/${NamaFile}"))
            strwrt.write(teks)
            strwrt.close()

after that you can acces File Manager and look up on the Internal Storage. Text1.txt will be on there below all the folder.

Check out the device model / machine name, DO NOT use the point/pixel count in your code directly, it's hard code and meaningless for the device hardware, the device model is the only unique identifier for a type of device to match.

#import <sys/utsname.h>

NSString* deviceName()
{
    struct utsname systemInfo;
    uname(&systemInfo);

    return [NSString stringWithCString:systemInfo.machine
                          encoding:NSUTF8StringEncoding];
}

Result:

@"iPhone10,3" on iPhone X (CDMA)
@"iPhone10,6" on iPhone X (GSM)

Refer to this answer.

Full code implementation:

#import <sys/utsname.h>

NSString * GetDeviceModel(void)
{
    static dispatch_once_t onceToken;
    static NSString *strModelID = nil;

    dispatch_once(&onceToken, ^{
#if TARGET_IPHONE_SIMULATOR
        strModelID = NSProcessInfo.processInfo.environment[@"SIMULATOR_MODEL_IDENTIFIER"];
#else
        struct utsname systemInfo;

        uname(&systemInfo);
        strModelID = [NSString stringWithCString:systemInfo.machine encoding:NSUTF8StringEncoding];
#endif
    });

    return strModelID;
}

// See the `Hardware strings` in https://en.wikipedia.org/wiki/List_of_iOS_devices
BOOL IsiPhoneX(void)
{
    NSString *strModelID = GetDeviceModel();

    return [strModelID isEqualToString:@"iPhone10,3"] || [strModelID isEqualToString:@"iPhone10,6"];
}

BOOL IsNotchiPhone(void)
{
    NSArray<NSString *> *notchiModels = @[
        @"iPhone10,3", @"iPhone10,6", // iPhone X
        @"iPhone11,2", @"iPhone11,4", @"iPhone11,6", // iPhone XS (Max)
        @"iPhone11,8", // iPhone XR
        @"iPhone12,1", @"iPhone12,3", @"iPhone12,5", // iPhone 11 (Pro (Max))
        @"iPhone13,1", @"iPhone13,2", @"iPhone13,3", @"iPhone13,4", // iPhone 12 ([mini]|[Pro (Max)])
    ];

    return [notchiModels containsObject:GetDeviceModel()];
}

Do you want the JDK or the JRE? Anyways, I had this problem too, a few weeks ago. I followed the instructions here and it worked:

http://www.backtrack-linux.org/wiki/index.php/Java_Install

NOTE: Before installing Java make sure you kill Firefox.

root@bt:~# killall -9 /opt/firefox/firefox-bin

You can download java from the official website. (Download tar.gz version)

We first create the directory and place java there:

root@bt:~# mkdir /opt/java

root@bt:~# mv -f jre1.7.0_05/ /opt/java/

Final changes.

root@bt:~# update-alternatives --install /usr/bin/java java /opt/java/jre1.7.0_05/bin/java 1

root@bt:~# update-alternatives --set java /opt/java/jre1.7.0_05/bin/java

root@bt:~# export JAVA_HOME="/opt/java/jre1.7.0_05"

Adding the plugin to Firefox.

For Java 7 (32 bit)

root@bt:~# ln -sf $JAVA_HOME/lib/i386/libnpjp2.so /usr/lib/mozilla/plugins/

For Java 8 (64 bit)

root@bt:~# ln -sf $JAVA_HOME/jre/lib/amd64/libnpjp2.so /usr/lib/mozilla/plugins/

Testing the plugin.

root@bt:~# firefox http://java.com/en/download/testjava.jsp

There is a minimal amount of "default" buffer when you startup a 'screen' session within your 'putty session'. I use screens a lot in my work, so I can tell you that you will not have a combination of 'screen' buffer & 'putty' buffer within your 'screen' session.

Setting the default number of scrollback lines by adding defscrollback 10000 to your ~/.screenrc file is the correct solution.

By the way, I use "defscrollback 200000" in my ./screenrc file.

Simply i have import in appmodule.ts

import { HttpClientModule } from '@angular/common/http';
  imports: [
     BrowserModule,
     FormsModule,
     HttpClientModule  <<<this 
  ],

My problem resolved

If you want to change the permissions of an existing file, use chmod (change mode):

$itWorked = chmod ("/yourdir/yourfile", 0777);

If you want all new files to have certain permissions, you need to look into setting your umode. This is a process setting that applies a default modification to standard modes.

It is a subtractive one. By that, I mean a umode of 022 will give you a default permission of 755 (777 - 022 = 755).

But you should think very carefully about both these options. Files created with that mode will be totally unprotected from changes.

Max file size can be restricted to a single MVC Controller or even to an Action.
web.config <location> tag can be used for this:

<location path="YourAreaName/YourControllerName>/YourActionName>">
  <system.web>
    <!-- 15MB maxRequestLength for asp.net, in KB 15360 -->
    <httpRuntime maxRequestLength="15360" />
  </system.web>
  <system.webServer>
    <security>
      <requestFiltering>
        <!-- 15MB maxAllowedContentLength, for IIS, in bytes 15728640 -->
        <requestLimits maxAllowedContentLength="15728640" />
      </requestFiltering>
    </security>
  </system.webServer>
</location>

Or you can add these entries in area's own web.config.

If you have installed SQL Server, some of its services may block the port which XAMPP needs. I solved my problem by disabling SQL Server Reporting Services and now Apache starts without any problems.

Just open the services.msc, scroll down, and find SQL Server Reporting Services. Right click on it and click Stop.

position: fixed;
bottom: 0;
(if needs element in whole display and left align)
left:0;
width: 100%;

categories = ['sprots', 'news'];
categoriesList = ", ".join(categories)
print(categoriesList)

This is the output: sprots, news

Anaconda or Miniconda?

Choose Anaconda if you:

1. Are new to conda or Python.

2. Like the convenience of having Python and over 1,500 scientific packages automatically installed at once.

3. Have the time and disk space---a few minutes and 3 GB.

4. Do not want to individually install each of the packages you want to use.

Choose Miniconda if you:

1. Do not mind installing each of the packages you want to use individually.

2. Do not have time or disk space to install over 1,500 packages at once.

3. Want fast access to Python and the conda commands and you wish to sort out the other programs later.

Source

When you call the function in a static context, $this simply doesn't exist.

You would have to use this::xyz() instead.

To find out what context you're in when a function can be called both statically and in an object instance, a good approach is outlined in this question: How to tell whether I’m static or an object?

There is a weird case where if the element is set to display: inline the jQuery check for visibility fails.

Example:

CSS

#myspan {display: inline;}

jQuery

$('#myspan').show(); // Our element is `inline` instead of `block`
$('#myspan').is(":visible"); // This is false

To fix it you can hide the element in jQuery and than show/hide or toggle() should work fine.

$('#myspan').hide()
$('#otherElement').on('click', function() {
    $('#myspan').toggle();
});

var date = new Date();
var year = date.getFullYear();
var month = date.getMonth() + 1;
month = (month < 10 ? "0" : "") + month;
var hour = date.getHours();
hour = (hour < 10 ? "0" : "") + hour;
var day  = date.getDate();
day = (hour > 12 ? "" : "") + day - 1;
day = (day < 10 ? "0" : "") + day;
x = ":"
console.log( month + x + day + x + year )

It will display the date in the month, day, then the year

viewToAnimate.animate().alpha(1).setDuration(1000).setInterpolator(new DecelerateInterpolator()).withEndAction(new Runnable() {
    @Override
    public void run() {
        viewToAnimate.animate().alpha(0).setDuration(1000).setInterpolator(new AccelerateInterpolator()).start();
    }
}).start();

Anything using the managed environment (which includes anything written in C# and VB.NET) requires the .NET framework. You can simply redistribute your .EXE in that scenario, but they'll need to install the appropriate framework if they don't already have it.

class tweet_photos(models.Model):
upload_path='absolute path'
image=models.ImageField(upload_to=upload_path)
image_url = models.URLField(null=True, blank=True)
def save(self, *args, **kwargs):
    if self.image_url:
        import urllib, os
        from urlparse import urlparse
        file_save_dir = self.upload_path
        filename = urlparse(self.image_url).path.split('/')[-1]
        urllib.urlretrieve(self.image_url, os.path.join(file_save_dir, filename))
        self.image = os.path.join(file_save_dir, filename)
        self.image_url = ''
    super(tweet_photos, self).save()

I think scrollViewDidEndDecelerating is the one you want. Its UIScrollViewDelegates optional method:

- (void)scrollViewDidEndDecelerating:(UIScrollView *)scrollView

Tells the delegate that the scroll view has ended decelerating the scrolling movement.

UIScrollViewDelegate documentation

I used JSON-C for a work project and would recommend it. Lightweight and is released with open licensing.

Documentation is included in the distribution. You basically have *_add functions to create JSON objects, equivalent *_put functions to release their memory, and utility functions that convert types and output objects in string representation.

The licensing allows inclusion with your project. We used it in this way, compiling JSON-C as a static library that is linked in with the main build. That way, we don't have to worry about dependencies (other than installing Xcode).

JSON-C also built for us under OS X (x86 Intel) and Linux (x86 Intel) without incident. If your project needs to be portable, this is a good start.

Set to null. Then there are no references anymore and the object will become eligible for Garbage Collection. GC will automatically remove the object from the heap.

if you want put a input required if other is written:

   <input type='text'
   name='name'
   ng-model='person.name'/>

   <input type='text'
   ng-model='person.lastname'             
   ng-required='person.name' />  

Regards.

You need to pass it as an extra:

String easyPuzzle  = "630208010200050089109060030"+
                     "008006050000187000060500900"+
                     "09007010681002000502003097";

Intent i = new Intent(this, ToClass.class);
i.putExtra("epuzzle", easyPuzzle);
startActivity(i); 

Then extract it from your new activity like this:

Intent intent = getIntent();
String easyPuzzle = intent.getExtras().getString("epuzzle");

I would suggest using a StreamingResponseBody since with it the application can write directly to the response (OutputStream) without holding up the Servlet container thread. It is a good approach if you are downloading a file very large.

@GetMapping("download")
public StreamingResponseBody downloadFile(HttpServletResponse response, @PathVariable Long fileId) {

    FileInfo fileInfo = fileService.findFileInfo(fileId);
    response.setContentType(fileInfo.getContentType());
    response.setHeader(
        HttpHeaders.CONTENT_DISPOSITION, "attachment;filename=\"" + fileInfo.getFilename() + "\"");

    return outputStream -> {
        int bytesRead;
        byte[] buffer = new byte[BUFFER_SIZE];
        InputStream inputStream = fileInfo.getInputStream();
        while ((bytesRead = inputStream.read(buffer)) != -1) {
            outputStream.write(buffer, 0, bytesRead);
        }
    };
}

Ps.: When using StreamingResponseBody, it is highly recommended to configure TaskExecutor used in Spring MVC for executing asynchronous requests. TaskExecutor is an interface that abstracts the execution of a Runnable.

More info: https://medium.com/swlh/streaming-data-with-spring-boot-restful-web-service-87522511c071

This will solve the problem,

var blogPosts = (from p in dc.BlogPosts
             where p.BlogPostID == ID
             select p);
if(blogPosts.Any())
{
  var post = post.Single();
}

IMHO the best option is to use YAML's native block scalars. Specifically in this case, the folded style block.

By invoking sh -c you can pass arguments to your container as commands, but if you want to elegantly separate them with newlines, you'd want to use the folded style block, so that YAML will know to convert newlines to whitespaces, effectively concatenating the commands.

A full working example:

apiVersion: v1
kind: Pod
metadata:
  name: myapp
  labels:
    app: myapp
spec:
  containers:
  - name: busy
    image: busybox:1.28
    command: ["/bin/sh", "-c"]
    args:
    - >
      command_1 &&
      command_2 &&
      ... 
      command_n

With the following you can insert multiple values and also have default values but you're creating a new dictionary.

d = {**{ key: value }, **default_values}

I've tested it with the most voted answer and on average this is faster as it can be seen in the following example, .

Speed test comparing a for loop based method with a dict comprehension with unpack operator method.

if no copy (d = default_vals.copy()) is made on the first case then the most voted answer would be faster once we reach orders of magnitude of 10**5 and greater. Memory footprint of both methods are the same.

Wrap it in double quotes

alter user "dell-sys" with password 'Pass@133';

Notice that you will have to use the same case you used when you created the user using double quotes. Say you created "Dell-Sys" then you will have to issue exact the same whenever you refer to that user.

I think the best you do is to drop that user and recreate without illegal identifier characters and without double quotes so you can later refer to it in any case you want.

If you run

brew install mariadb
...
brew services start mariadb
==> Successfully started `mariadb` (label: homebrew.mxcl.mariadb)

 $(brew --prefix mariadb)/bin/mysqladmin -u root password newpass
/usr/local/opt/mariadb/bin/mysqladmin: connect to server at 'localhost' failed
error: 'Access denied for user 'root'@'localhost''

also login with root account fails:

mariadb -u root
ERROR 1698 (28000): Access denied for user 'root'@'localhost'

then default admin user is created same name as your MacOS account username, e.g. johnsmit.

To login as root, issue:

mariadb -u johnsmit
Welcome to the MariaDB monitor.  Commands end with ; or \g.
Your MariaDB connection id is 17
Server version: 10.4.11-MariaDB Homebrew

Copyright (c) 2000, 2018, Oracle, MariaDB Corporation Ab and others.

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

MariaDB [(none)]> exit
Bye

Python is upset because you are attempting to assign a value to something that can't be assigned a value.

((t[1])/length) * t[1] += string

When you use an assignment operator, you assign the value of what is on the right to the variable or element on the left. In your case, there is no variable or element on the left, but instead an interpreted value: you are trying to assign a value to something that isn't a "container".

Based on what you've written, you're just misunderstanding how this operator works. Just switch your operands, like so.

string += str(((t[1])/length) * t[1])

Note that I've wrapped the assigned value in str in order to convert it into a str so that it is compatible with the string variable it is being assigned to. (Numbers and strings can't be added together.)

Try this code,

public void ConnectToAccess()
{
    System.Data.OleDb.OleDbConnection conn = new 
        System.Data.OleDb.OleDbConnection();
    // TODO: Modify the connection string and include any
    // additional required properties for your database.
    conn.ConnectionString = @"Provider=Microsoft.Jet.OLEDB.4.0;" +
        @"Data source= C:\Documents and Settings\username\" +
        @"My Documents\AccessFile.mdb";
    try
    {
        conn.Open();
        // Insert code to process data.
    }
        catch (Exception ex)
    {
        MessageBox.Show("Failed to connect to data source");
    }
    finally
    {
        conn.Close();
    }
}

http://msdn.microsoft.com/en-us/library/5ybdbtte(v=vs.71).aspx

I have Samsung Galaxy S3 and it was not showing in the "Remote devices" tab nor in chrome://inspect. The device did show in Windows's Device Manager as GT-I9300, though. What worked for me was:

1. Plug the mobile phone to the front USB port
2. On my phone, click the notification about successful connection
3. Make sure the connection type is Camera (PTP)
4. On my Windows machine, download installer from https://github.com/koush/UniversalAdbDriver
5. Run it :)
6. Open cmd.exe
7. cd "C:\Program Files (x86)\ClockworkMod\Universal Adb Driver"
8. adb devices
9. Open Chrome in both mobile phone and Windows machine
10. On Windows's machine navigate to chrome://inspect - there, after a while you should see the target phone :)

I'm not sure if it affected the whole flow somehow, but at some point I've installed, and later uninstalled the drivers from Samsung: http://www.samsung.com/us/support/downloads/ > Mobile > Phones > Galaxy S > S III > Unlocked > http://www.samsung.com/us/support/owners/product/galaxy-s-iii-unlocked#downloads

If you look at the hive-site.xml file you will see something like this

<property>
   <name>hive.metastore.warehouse.dir</name>
   <value>/usr/hive/warehouse </value>
   <description>location of the warehouse directory</description>
 </property>

/usr/hive/warehouse is the default location for all managed tables. External tables may be stored at a different location.

describe formatted <table_name> is the hive shell command which can be use more generally to find the location of data pertaining to a hive table.

First of all, let's try to make your code a little simpler:

// No need to create a circle unless it is clearly necessary to
// demonstrate the problem

// Your Rect2f defines a default constructor, so let's use it for simplicity.
shared_ptr<Shape> rect(new Rect2f());

Okay, so now we see that the parentheses are clearly balanced. What else could it be? Let's check the following code snippet's error:

int main() {
    delete new T();
}

This may seem like weird usage, and it is, but I really hate memory leaks. However, the output does seem useful:

In function 'int main()':
Line 2: error: expected type-specifier before 'T'

Aha! Now we're just left with the error about the parentheses. I can't find what causes that; however, I think you are forgetting to include the file that defines Rect2f.

Fragment PHP (in console Cloud9):

echo "\n";
echo "1: first_srt=1\nsecnd_srt=2\n";
echo "\n";
echo '2: first_srt=1\nsecnd_srt=2\n';
echo "\n";
echo "==============\n";
echo "\n";

resulting output:

  1: first_srt=1
  secnd_srt=2

  2: first_srt=1\nsecnd_srt=2\n
  ==============

Difference between 1 and 2: " versus '

Try

SELECT @@VERSION 

or for SQL Server 2000 and above the following is easier to parse :)

SELECT SERVERPROPERTY('productversion')
     , SERVERPROPERTY('productlevel')
     , SERVERPROPERTY('edition')

From: http://support.microsoft.com/kb/321185

I was facing with this problem some time ago and I found java.util.LinkedList is best for my case. It has several methods, with different namings, but they're doing what is needed:

push()    -> LinkedList.addLast(); // Or just LinkedList.add();
pop()     -> LinkedList.pollLast();
shift()   -> LinkedList.pollFirst();
unshift() -> LinkedList.addFirst();

if (dr[dc.ColumnName].GetType().ToString() == "System.DateTime")

Yes, you can change the default shell from Explorer.exe to a specific application.

In Regedit, navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon. The current shell should be Explorer.exe. Change it to YourApp.exe. That will change the shell for all users who log on to the machine. If you only want to change it for a specific user, go to the same key in HKEY_CURRENT_USER instead.

With the two previous steps stated above, you're still missing the foreign key constraint. This should work:

  class AddUserReferenceToTester < ActiveRecord::Migration
      def change
          add_column :testers, :user_id, :integer, references: :users
      end
  end

Disable safari bounce scrolling effect:

html,
body {
  height: 100%;
  width: 100%;
  overflow: auto;
  position: fixed;
}  

I use ? (0x25B8) for the right arrow, often to show a collapsed list; and I pair it with ? (0x25BE) to show the list opened up. Both are unobtrusive.

After i tried Android official Autosizing TextView, i found if your Android version is prior to Android 8.0 (API level 26), you need use android.support.v7.widget.AppCompatTextView, and make sure your support library version is above 26.0.0. Example:

<android.support.v7.widget.AppCompatTextView
    android:layout_width="130dp"
    android:layout_height="32dp"
    android:maxLines="1"
    app:autoSizeMaxTextSize="22sp"
    app:autoSizeMinTextSize="12sp"
    app:autoSizeStepGranularity="2sp"
    app:autoSizeTextType="uniform" />

update:

According to @android-developer's reply, i check the AppCompatActivity source code, and found these two lines in onCreate

final AppCompatDelegate delegate = getDelegate(); delegate.installViewFactory();

and in AppCompatDelegateImpl's createView

    if (mAppCompatViewInflater == null) {
        mAppCompatViewInflater = new AppCompatViewInflater();
    }

it use AppCompatViewInflater inflater view, when AppCompatViewInflater createView it will use AppCompatTextView for "TextView".

public final View createView(){
    ...
    View view = null;
    switch (name) {
        case "TextView":
            view = new AppCompatTextView(context, attrs);
            break;
        case "ImageView":
            view = new AppCompatImageView(context, attrs);
            break;
        case "Button":
            view = new AppCompatButton(context, attrs);
            break;
    ...
}

In my project i don't use AppCompatActivity, so i need use <android.support.v7.widget.AppCompatTextView> in xml.

If you haven't restarted your SQL database Server after you make login changes, then make sure you do that. Start->Programs->Microsoft SQL Server -> Configuration tools -> SQL Server configuration manager -> Restart Server.

It looks like you only added the user to the server. You need to add them to the database too. Either open the database/Security/User/Add New User or open the server/Security/Logins/Properties/User Mapping.

Try:

select distinct T1.id
  from TABLE1 T1
 where not exists (select distinct T2.id
                     from TABLE2 T2
                    where T2.id = T1.id)

With sql oracle 11g+

How about this?

List<string> monValues = Application["mondayValues"] as List<string>;
int sum = monValues.ConvertAll(Convert.ToInt32).Sum();

All a Try-Catch does is allow your program to fail gracefully. In a catch statement, you generally try to log the error, and maybe roll back changes if you need to.

bool finished = false;

while(finished == false)
{
    try
    {
        //your code here
        finished = true
    }
    catch(exception ex)
    {
        log.error("there was an error, ex");
    }
}

One or more reasons are there for these error.

• Log in with your Gmail( or any other if ) in your local system.

• Also check for Less Secure App and Set it to "Turn On" here is the Link for GMAIL. https://www.google.com/settings/security/lesssecureapps

• check for EnableSsl in your Email code, and also set it to true.

  smtp.EnableSsl = true;
  

• Also check which port are you using currently. 25 is Global, but you can check it for others too like 587. check here. Does all SMTP communication happen over 25?

• IF YOU ARE ON REMOTE : Check the answer of Vlad Tamas above.

h5py provides a model of datasets and groups. The former is basically arrays and the latter you can think of as directories. Each is named. You should look at the documentation for the API and examples:

http://docs.h5py.org/en/latest/quick.html

A simple example where you are creating all of the data upfront and just want to save it to an hdf5 file would look something like:

In [1]: import numpy as np
In [2]: import h5py
In [3]: a = np.random.random(size=(100,20))
In [4]: h5f = h5py.File('data.h5', 'w')
In [5]: h5f.create_dataset('dataset_1', data=a)
Out[5]: <HDF5 dataset "dataset_1": shape (100, 20), type "<f8">

In [6]: h5f.close()

You can then load that data back in using: '

In [10]: h5f = h5py.File('data.h5','r')
In [11]: b = h5f['dataset_1'][:]
In [12]: h5f.close()

In [13]: np.allclose(a,b)
Out[13]: True

Definitely check out the docs:

http://docs.h5py.org

Writing to hdf5 file depends either on h5py or pytables (each has a different python API that sits on top of the hdf5 file specification). You should also take a look at other simple binary formats provided by numpy natively such as np.save, np.savez etc:

http://docs.scipy.org/doc/numpy/reference/routines.io.html

I use getActionCommand() to hear buttons. I apply the setActionCommand() to each button so that I can hear whenever an event is execute with event.getActionCommand("The setActionCommand() value of the button").

I use getSource() for JRadioButtons for example. I write methods that returns each JRadioButton so in my Listener Class I can specify an action each time a new JRadioButton is pressed. So for example:

public class SeleccionListener implements ActionListener, FocusListener {}

So with this I can hear button events and radioButtons events. The following are examples of how I listen each one:

public void actionPerformed(ActionEvent event) {
    if (event.getActionCommand().equals(GUISeleccion.BOTON_ACEPTAR)) {
        System.out.println("Aceptar pressed");
    }

In this case GUISeleccion.BOTON_ACEPTAR is a "public static final String" which is used in JButtonAceptar.setActionCommand(BOTON_ACEPTAR).

public void focusGained(FocusEvent focusEvent) {
    if (focusEvent.getSource().equals(guiSeleccion.getJrbDat())){
        System.out.println("Data radio button");
    }

In this one, I get the source of any JRadioButton that is focused when the user hits it. guiSeleccion.getJrbDat() returns the reference to the JRadioButton that is in the class GUISeleccion (this is a Frame)

What does void 0 mean?

void^[MDN] is a prefix keyword that takes one argument and always returns undefined.

Examples

void 0
void (0)
void "hello"
void (new Date())
//all will return undefined

What's the point of that?

It seems pretty useless, doesn't it? If it always returns undefined, what's wrong with just using undefined itself?

In a perfect world we would be able to safely just use undefined: it's much simpler and easier to understand than void 0. But in case you've never noticed before, this isn't a perfect world, especially when it comes to Javascript.

The problem with using undefined was that undefined is not a reserved word (it is actually a property of the global object ^[wtfjs]). That is, undefined is a permissible variable name, so you could assign a new value to it at your own caprice.

alert(undefined); //alerts "undefined"
var undefined = "new value";
alert(undefined) // alerts "new value"

Note: This is no longer a problem in any environment that supports ECMAScript 5 or newer (i.e. in practice everywhere but IE 8), which defines the undefined property of the global object as read-only (so it is only possible to shadow the variable in your own local scope). However, this information is still useful for backwards-compatibility purposes.

alert(window.hasOwnProperty('undefined')); // alerts "true"
alert(window.undefined); // alerts "undefined"
alert(undefined === window.undefined); // alerts "true"
var undefined = "new value";
alert(undefined); // alerts "new value"
alert(undefined === window.undefined); // alerts "false"

void, on the other hand, cannot be overidden. void 0 will always return undefined. undefined, on the other hand, can be whatever Mr. Javascript decides he wants it to be.

Why void 0, specifically?

Why should we use void 0? What's so special about 0? Couldn't we just as easily use 1, or 42, or 1000000 or "Hello, world!"?

And the answer is, yes, we could, and it would work just as well. The only benefit of passing in 0 instead of some other argument is that 0 is short and idiomatic.

Why is this still relevant?

Although undefined can generally be trusted in modern JavaScript environments, there is one trivial advantage of void 0: it's shorter. The difference is not enough to worry about when writing code but it can add up enough over large code bases that most code minifiers replace undefined with void 0 to reduce the number of bytes sent to the browser.

Try this query:

DELETE WorkRecord2, Employee 
FROM WorkRecord2 
INNER JOIN Employee ON (tbl_name.EmployeeRun=tbl_name.EmployeeNo)
WHERE tbl_name.Company = '1' 
AND tbl_name.Date = '2013-05-06';

I really needed this in C# and found Center MessageBox C#

Here's a nicely formatted version

using System;
using System.Windows.Forms;
using System.Text;
using System.Drawing;
using System.Runtime.InteropServices;   

public class MessageBoxEx
{
    private static IWin32Window _owner;
    private static HookProc _hookProc;
    private static IntPtr _hHook;

    public static DialogResult Show(string text)
    {
        Initialize();
        return MessageBox.Show(text);
    }

    public static DialogResult Show(string text, string caption)
    {
        Initialize();
        return MessageBox.Show(text, caption);
    }

    public static DialogResult Show(string text, string caption, MessageBoxButtons buttons)
    {
        Initialize();
        return MessageBox.Show(text, caption, buttons);
    }

    public static DialogResult Show(string text, string caption, MessageBoxButtons buttons, MessageBoxIcon icon)
    {
        Initialize();
        return MessageBox.Show(text, caption, buttons, icon);
    }

    public static DialogResult Show(string text, string caption, MessageBoxButtons buttons, MessageBoxIcon icon, MessageBoxDefaultButton defButton)
    {
        Initialize();
        return MessageBox.Show(text, caption, buttons, icon, defButton);
    }

    public static DialogResult Show(string text, string caption, MessageBoxButtons buttons, MessageBoxIcon icon, MessageBoxDefaultButton defButton, MessageBoxOptions options)
    {
        Initialize();
        return MessageBox.Show(text, caption, buttons, icon, defButton, options);
    }

    public static DialogResult Show(IWin32Window owner, string text)
    {
        _owner = owner;
        Initialize();
        return MessageBox.Show(owner, text);
    }

    public static DialogResult Show(IWin32Window owner, string text, string caption)
    {
        _owner = owner;
        Initialize();
        return MessageBox.Show(owner, text, caption);
    }

    public static DialogResult Show(IWin32Window owner, string text, string caption, MessageBoxButtons buttons)
    {
        _owner = owner;
        Initialize();
        return MessageBox.Show(owner, text, caption, buttons);
    }

    public static DialogResult Show(IWin32Window owner, string text, string caption, MessageBoxButtons buttons, MessageBoxIcon icon)
    {
        _owner = owner;
        Initialize();
        return MessageBox.Show(owner, text, caption, buttons, icon);
    }

    public static DialogResult Show(IWin32Window owner, string text, string caption, MessageBoxButtons buttons, MessageBoxIcon icon, MessageBoxDefaultButton defButton)
    {
        _owner = owner;
        Initialize();
        return MessageBox.Show(owner, text, caption, buttons, icon, defButton);
    }

    public static DialogResult Show(IWin32Window owner, string text, string caption, MessageBoxButtons buttons, MessageBoxIcon icon, MessageBoxDefaultButton defButton, MessageBoxOptions options)
    {
        _owner = owner;
        Initialize();
        return MessageBox.Show(owner, text, caption, buttons, icon,
                               defButton, options);
    }

    public delegate IntPtr HookProc(int nCode, IntPtr wParam, IntPtr lParam);

    public delegate void TimerProc(IntPtr hWnd, uint uMsg, UIntPtr nIDEvent, uint dwTime);

    public const int WH_CALLWNDPROCRET = 12;

    public enum CbtHookAction : int
    {
        HCBT_MOVESIZE = 0,
        HCBT_MINMAX = 1,
        HCBT_QS = 2,
        HCBT_CREATEWND = 3,
        HCBT_DESTROYWND = 4,
        HCBT_ACTIVATE = 5,
        HCBT_CLICKSKIPPED = 6,
        HCBT_KEYSKIPPED = 7,
        HCBT_SYSCOMMAND = 8,
        HCBT_SETFOCUS = 9
    }

    [DllImport("user32.dll")]
    private static extern bool GetWindowRect(IntPtr hWnd, ref Rectangle lpRect);

    [DllImport("user32.dll")]
    private static extern int MoveWindow(IntPtr hWnd, int X, int Y, int nWidth, int nHeight, bool bRepaint);

    [DllImport("User32.dll")]
    public static extern UIntPtr SetTimer(IntPtr hWnd, UIntPtr nIDEvent, uint uElapse, TimerProc lpTimerFunc);

    [DllImport("User32.dll")]
    public static extern IntPtr SendMessage(IntPtr hWnd, int Msg, IntPtr wParam, IntPtr lParam);

    [DllImport("user32.dll")]
    public static extern IntPtr SetWindowsHookEx(int idHook, HookProc lpfn, IntPtr hInstance, int threadId);

    [DllImport("user32.dll")]
    public static extern int UnhookWindowsHookEx(IntPtr idHook);

    [DllImport("user32.dll")]
    public static extern IntPtr CallNextHookEx(IntPtr idHook, int nCode, IntPtr wParam, IntPtr lParam);

    [DllImport("user32.dll")]
    public static extern int GetWindowTextLength(IntPtr hWnd);

    [DllImport("user32.dll")]
    public static extern int GetWindowText(IntPtr hWnd, StringBuilder text, int maxLength);

    [DllImport("user32.dll")]
    public static extern int EndDialog(IntPtr hDlg, IntPtr nResult);

    [StructLayout(LayoutKind.Sequential)]
    public struct CWPRETSTRUCT
    {
        public IntPtr lResult;
        public IntPtr lParam;
        public IntPtr wParam;
        public uint message;
        public IntPtr hwnd;
    } ;

    static MessageBoxEx()
    {
        _hookProc = new HookProc(MessageBoxHookProc);
        _hHook = IntPtr.Zero;
    }

    private static void Initialize()
    {
        if (_hHook != IntPtr.Zero)
        {
            throw new NotSupportedException("multiple calls are not supported");
        }

        if (_owner != null)
        {
            _hHook = SetWindowsHookEx(WH_CALLWNDPROCRET, _hookProc, IntPtr.Zero, AppDomain.GetCurrentThreadId());
        }
    }

    private static IntPtr MessageBoxHookProc(int nCode, IntPtr wParam, IntPtr lParam)
    {
        if (nCode < 0)
        {
            return CallNextHookEx(_hHook, nCode, wParam, lParam);
        }

        CWPRETSTRUCT msg = (CWPRETSTRUCT)Marshal.PtrToStructure(lParam, typeof(CWPRETSTRUCT));
        IntPtr hook = _hHook;

        if (msg.message == (int)CbtHookAction.HCBT_ACTIVATE)
        {
            try
            {
                CenterWindow(msg.hwnd);
            }
            finally
            {
                UnhookWindowsHookEx(_hHook);
                _hHook = IntPtr.Zero;
            }
        }

        return CallNextHookEx(hook, nCode, wParam, lParam);
    }

    private static void CenterWindow(IntPtr hChildWnd)
    {
        Rectangle recChild = new Rectangle(0, 0, 0, 0);
        bool success = GetWindowRect(hChildWnd, ref recChild);

        int width = recChild.Width - recChild.X;
        int height = recChild.Height - recChild.Y;

        Rectangle recParent = new Rectangle(0, 0, 0, 0);
        success = GetWindowRect(_owner.Handle, ref recParent);

        Point ptCenter = new Point(0, 0);
        ptCenter.X = recParent.X + ((recParent.Width - recParent.X) / 2);
        ptCenter.Y = recParent.Y + ((recParent.Height - recParent.Y) / 2);


        Point ptStart = new Point(0, 0);
        ptStart.X = (ptCenter.X - (width / 2));
        ptStart.Y = (ptCenter.Y - (height / 2));

        ptStart.X = (ptStart.X < 0) ? 0 : ptStart.X;
        ptStart.Y = (ptStart.Y < 0) ? 0 : ptStart.Y;

        int result = MoveWindow(hChildWnd, ptStart.X, ptStart.Y, width,
                                height, false);
    }

}

Listing Out only directories

print("\nWe are listing out only the directories in current directory -")
directories_in_curdir = filter(os.path.isdir, os.listdir(os.curdir))
print(directories_in_curdir)

Listing Out only files in current directory

files = filter(os.path.isfile, os.listdir(os.curdir))
print("\nThe following are the list of all files in the current directory -")
print(files)

You can add full text to an existing instance by changing the SQL Server program in Programs and Features. Follow the steps below. You might need the original disk or ISO for the installation to complete. (Per HotN's comment: If you have SQL Server Express, make sure it is SQL Server Express With Advanced Services.)

Directions:

1. Open the Programs and Features control panel.
2. Select Microsoft SQL Server 2012 and click Change.
3. When prompted to Add/Repair/Remove, select Add.
4. Advance through the wizard until the Feature Selection screen. Then select Full-Text Search.

5. On the Installation Type screen, select the appropriate SQL Server instance.

6. Advance through the rest of the wizard.

Source (with screenshots): http://www.techrepublic.com/blog/networking/adding-sql-full-text-search-to-an-existing-sql-server/5546

I actually used to check window.parent and it worked for me, but lately window is a cyclic object and always has a parent key, iframe or no iframe.

As the comments suggest hard comparing with window.parent works. Not sure if this will work if iframe is exactly the same webpage as parent.

window === window.parent;

Use the following code

<span id="sptext" runat="server"></span>

Java Script

document.getElementById('<%=sptext'%>).innerHTML='change text';

C#

sptext.innerHTML

If you keep grabbing bits from your data, you might want to use a bitfield. You'll just have to set up a struct and load it with only ones and zeroes:

struct bitfield{
    unsigned int bit : 1
}
struct bitfield *bitstream;

then later on load it like this (replacing char with int or whatever data you are loading):

long int i;
int j, k;
unsigned char c, d;

bitstream=malloc(sizeof(struct bitfield)*charstreamlength*sizeof(char));
for (i=0; i<charstreamlength; i++){
    c=charstream[i];
    for(j=0; j < sizeof(char)*8; j++){
        d=c;
        d=d>>(sizeof(char)*8-j-1);
        d=d<<(sizeof(char)*8-1);
        k=d;
        if(k==0){
            bitstream[sizeof(char)*8*i + j].bit=0;
        }else{
            bitstream[sizeof(char)*8*i + j].bit=1;
        }
    }
}

Then access elements:

bitstream[bitpointer].bit=...

or

...=bitstream[bitpointer].bit

All of this is assuming are working on i86/64, not arm, since arm can be big or little endian.

Assign NOW() to a variable then update the datetime with variable:

update_date_time=now()

now update like this

UPDATE table SET datetime =update_date_time;

correct the syntax, as per your requirement

Use Match() function in excel VBA to check whether the value exists in an array.

Sub test()
    Dim x As Long

    vars1 = Array("Abc", "Xyz", "Examples")
    vars2 = Array("Def", "IJK", "MNO")

    If IsNumeric(Application.Match(Range("A1").Value, vars1, 0)) Then
        x = 1
    ElseIf IsNumeric(Application.Match(Range("A1").Value, vars2, 0)) Then
        x = 1
    End If

    MsgBox x
End Sub

To get started with WCF, it might be easiest to just use the default SOAP format and HTTP POST (rather than GET) for the web-service bindings. The easiest HTTP binding to get working is "basicHttpBinding". Here is an example of what the ServiceContract/OperationContract might look like for your login service:

[ServiceContract(Namespace="http://mycompany.com/LoginService")]
public interface ILoginService
{
    [OperationContract]
    string Login(string username, string password);
}

The implementation of the service could look like this:

public class LoginService : ILoginService
{
    public string Login(string username, string password)
    {
        // Do something with username, password to get/create sessionId
        // string sessionId = "12345678";
        string sessionId = OperationContext.Current.SessionId;

        return sessionId;
    }
}

You can host this as a windows service using a ServiceHost, or you can host it in IIS like a normal ASP.NET web (service) application. There are a lot of tutorials out there for both of these.

The WCF service config might look like this:

<?xml version="1.0" encoding="utf-8" ?>
<configuration>


    <system.serviceModel>
        <behaviors>
            <serviceBehaviors>
                <behavior name="LoginServiceBehavior">
                    <serviceMetadata />
                </behavior>
            </serviceBehaviors>
        </behaviors>

        <services>
            <service name="WcfTest.LoginService"
                     behaviorConfiguration="LoginServiceBehavior" >
                <host>
                    <baseAddresses>
                        <add baseAddress="http://somesite.com:55555/LoginService/" />
                    </baseAddresses>
                </host>
                <endpoint name="LoginService"
                          address=""
                          binding="basicHttpBinding"
                          contract="WcfTest.ILoginService" />

                <endpoint name="LoginServiceMex"
                          address="mex"
                          binding="mexHttpBinding"
                          contract="IMetadataExchange" />
            </service>
        </services>
    </system.serviceModel>
</configuration>

(The MEX stuff is optional for production, but is needed for testing with WcfTestClient.exe, and for exposing the service meta-data).

You'll have to modify your Java code to POST a SOAP message to the service. WCF can be a little picky when inter-operating with non-WCF clients, so you'll have to mess with the POST headers a little to get it to work. Once you get this running, you can then start to investigate security for the login (might need to use a different binding to get better security), or possibly using WCF REST to allow for logins with a GET rather than SOAP/POST.

Here is an example of what the HTTP POST should look like from the Java code. There is a tool called "Fiddler" that can be really useful for debugging web-services.

POST /LoginService HTTP/1.1
Content-Type: text/xml; charset=utf-8
SOAPAction: "http://mycompany.com/LoginService/ILoginService/Login"
Host: somesite.com:55555
Content-Length: 216
Expect: 100-continue
Connection: Keep-Alive

<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">
<s:Body>
<Login xmlns="http://mycompany.com/LoginService">
<username>Blah</username>
<password>Blah2</password>
</Login>
</s:Body>
</s:Envelope>

UPDATE table
SET A = IF(A > 0 AND A < 1, 1, IF(A > 1 AND A < 2, 2, A))
WHERE A IS NOT NULL;

you might want to use CEIL() if A is always a floating point value > 0 and <= 2

I'm assuming you're using express, given the logs you have in your question. The key is to set the timeout property on server (the following sets the timeout to one second, use whatever value you want):

var server = app.listen(app.get('port'), function() {
  debug('Express server listening on port ' + server.address().port);
});
server.timeout = 1000;

If you're not using express and are only working with vanilla node, the principle is the same. The following will not return data:

var http = require('http');
var server = http.createServer(function (req, res) {
  setTimeout(function() {
    res.writeHead(200, {'Content-Type': 'text/plain'});
    res.end('Hello World\n');
  }, 200);
}).listen(1337, '127.0.0.1');

server.timeout = 20;
console.log('Server running at http://127.0.0.1:1337/');

So this has been quite painful for something that should be trivial. Here is what I did:

Use xcassets

I decided to use .xcassets versus the .xib for launch. I deleted the .xib. If you have images.xcassets already in your project then great, otherwise you can add one from File>New>file:

Create a Launch Image Set

Now create at a minimum a launchimage set and icon set in your .xcassets file by right clicking in the navigator area.

Update the App Icons and Launch Images Settings

Then I made sure that the "Apps icon and image sets" in my target are as below.

Very Important: Make sure the "Launch screen file" setting is blank.

Add the Images

Last but not least, the terminology used by Apple for the device selection is confusing. Initially I thought that since I am deploying for iOS8 only (iPhone Portrait), I can do this and just put in the iPhone 6 and iPhone 6+ launch images:

I quickly realized that is not the way this works and I was getting a warning: "An iPhone Retina (4-inch) launch image for iOS 7.0 and later is required."

So I had to select the iPhone under iOS 7.0 and later as well and add an Image for the iPhone 5s.

So to find out which boxes to check on the right, do not ask the question: What is my minimum iOS and device and device orientation but rather ask:

What devices out there can support my minimum iOS? Now What is the minimum iOS supported on those devices? And make sure you check all of those boxes. So for me, I am targeting iPhone 5s, 6 and 6 Plus at 8.0 but given that iPhone 5s can exist with 7.0, I need to check the 7.0 box as well to show the image placeholder. In other words, the (iOS) check box on the right shows you the minimum iOS version available for that device and you need to click it to show the image placeholder and put an image regardless of whether you are deploying at this iOS version or not.

Hope this helps somebody.

TLDR Answer

Given an email address like...

[email protected]

The length limits are as follows:

• Entire Email Address (aka: "The Path"): i.e., [email protected] -- 256 characters maximum.
• Local-Part: i.e., me -- 64 character maximum.
• Domain: i.e., example.com -- 254 characters maximum.

Source

SMTP originally defined what a path was in RFC821, published August 1982, which is an official Internet Standard (most RFC's are only proposals). To quote it...

...a reverse-path, specifies who the mail is from.

...a forward-path, which specifies who the mail is to.

RFC2821, published in April 2001, is the Obsoleted Standard that defined our present maximum values for local-parts, domains, and paths. A new Draft Standard, RFC5321, published in October 2008, keeps the same limits. In between these two dates, RFC3696 was published, on February 2004. It mistakenly cites the maximum email address limit as 320-characters, but this document is "Informational" only, and states: "This memo provides information for the Internet community. It does not specify an Internet standard of any kind." So, we can disregard it.

To quote RFC2821, the modern, accepted standard as confirmed in RFC5321...

4.5.3.1.1. Local-part

The maximum total length of a user name or other local-part is 64 characters.

4.5.3.1.2. Domain

The maximum total length of a domain name or number is 255 characters.

4.5.3.1.3. Path

The maximum total length of a reverse-path or forward-path is 256 characters (including the punctuation and element separators).

You'll notice that I indicate a domain maximum of 254 and the RFC indicates a domain maximum of 255. It's a matter of simple arithmetic. A 255-character domain, plus the "@" sign, is a 256-character path, which is the max path length. An empty or blank name is invalid, though, so the domain actually has a maximum of 254.

Not exactly the same as NUnit's Value (or TestCase) attributes, but MSTest has the DataSource attribute, which allows you to do a similar thing.

You can hook it up to database or XML file - it is not as straightforward as NUnit's feature, but it does the job.

I would like to share my thoughts as well, since I've bumped into the same issue.

Well, just answering the question would be:

1 - Add an extenssion to the observable collection class like this:

namespace YourNameSpace
{
    public static class ObservableCollectionExtension
    {
        public static void OrderByReference<T>(this ObservableCollection<T> collection, List<T> comparison)
        {
            for (int i = 0; i < comparison.Count; i++)
            {
                if (!comparison.ElementAt(i).Equals(collection.ElementAt(i)))
                    collection.Move(collection.IndexOf(comparison[i]), i);
            }
        }
        
        public static void InsertInPlace<T>(this ObservableCollection<T> collection, List<T> comparison, T item)
        {
            int index = comparison.IndexOf(item);
            comparison.RemoveAt(index);
            collection.OrderByReference(comparison);
            collection.Insert(index, item);
        }
    }
}

2 - Then use it like this:

_animals.OrderByReference(_animals.OrderBy(x => x).ToList());

This changes your ObservableCollection, you can use linq and it doesn't change the bindings!

Extra:

I've extended @Marco and @Contango answers to my own liking. First I thought of using a list directly as the comparison, so you would have this:

public static void OrderByReference<T>(this ObservableCollection<T> collection, List<T> comparison)
{
    for (int i = 0; i < comparison.Count; i++)
    {
        collection.Move(collection.IndexOf(comparison[i]), i);
    }
}

And using like this:

YourObservableCollection.OrderByReference(YourObservableCollection.DoYourLinqOrdering().ToList());

Then I've thought, since this always move everything and triggers the move in the ObservableCollection why not compare if the object is already in there, and this brings what I've put in the begining with the Equals comparator.

Adding the object to the correct place also sounded good, but I wanned a simple way to do it. So I've came up with that:

public static void InsertInPlace<T>(this ObservableCollection<T> collection, List<T> comparison, T item)
{
    collection.Insert(comparison.IndexOf(item), item);
}

You send a list with the new object where you want and also this new object, so you need to create a list, then add this new object, like this:

var YourList = YourObservableCollection.ToList();
var YourObject = new YourClass { ..... };
YourList.Add(YourObject);
YourObservableCollection.InsertInPlace(YourList.DoYourLinqOrdering().ToList(), YourObject);

But since the ObservableCollection could be in a different order than the list because of the selection in the "DoYourLinqOrdering()" (this would happen if the collection wasn't previously ordered) I've added the first extession (OrderByReference) in the insert as you can see in the begining of the answer. It will not take long if it doesn't need to move the itens arround, so I did't saw a problem in using it.

As performance goes, I've compared the methods by checking the time it takes for each to finish, so not ideal, but anyway, I've tested an observable collection with 20000 itens. For the OrderByReference I didn't saw great difference in the performance by adding the Equal object checker, but if not all itens need to be moved it is faster and it doesn't fire unecessary Move events on the collecitonChanged, so thats something. For the InsertInPlace is the same thing, if the ObservableCollection is already sorted, just checking if the objects are in the right place is faster than moving all the itens around, so there was not a huge difference in time if it is just passing through the Equals statement and you get the benefit of being sure everything is where it should be.

Be aware that if you use this extession with objects that dont mach or with a list that have more or less objects you will get an ArgumentOutOfRangeException or some other unexpect behaviour.

Hopes this helps somebody!

Removing print statements can also fix the problem.

Apart from loading images, this error also happens when your code is printing continuously at a high rate, which is causing the error "IOPub data rate exceeded". E.g. if you have a print statement in a for loop somewhere that is being called over 1000 times.

building on an answer from another posting.. I've come up with a more generic way to build out a list, utilizing dynamic retrieval with Json.NET version 12.x

using Newtonsoft.Json;

static class JsonObj
{
    /// <summary>
    /// Deserializes a json file into an object list
    /// Author: Joseph Poirier 2/26/2019
    /// </summary>
    /// <typeparam name="T"></typeparam>
    /// <param name="fileName"></param>
    /// <returns></returns>
    public static List<T> DeSerializeObject<T>(string fileName)
    {
        List<T> objectOut = new List<T>();

        if (string.IsNullOrEmpty(fileName)) { return objectOut; }

        try
        {
            // reading in full file as text
            string ss = File.ReadAllText(fileName);

            // went with <dynamic> over <T> or <List<T>> to avoid error..
            //  unexpected character at line 1 column 2
            var output = JsonConvert.DeserializeObject<dynamic>(ss);

            foreach (var Record in output)
            {
                foreach (T data in Record)
                {
                    objectOut.Add(data);
                }
            }
        }
        catch (Exception ex)
        {
            //Log exception here
            Console.Write(ex.Message);
        }

        return objectOut;
    }
}

call to process

{
        string fname = "../../Names.json"; // <- your json file path

        // for alternate types replace string with custom class below
        List<string> jsonFile = JsonObj.DeSerializeObject<string>(fname);
}

or this call to process

{
        string fname = "../../Names.json"; // <- your json file path

        // for alternate types replace string with custom class below
        List<string> jsonFile = new List<string>();
        jsonFile.AddRange(JsonObj.DeSerializeObject<string>(fname));
}

Perhaps the best two browser techs for this are Canvas, with Flash as a back up.

We tried VML on IE as backup for Canvas, but it was much slower than Flash. SVG was slower then all the rest.

With jSignature ( http://willowsystems.github.com/jSignature/ ) we used Canvas as primary, with fallback to Flash-based Canvas emulator (FlashCanvas) for IE8 and less. Id' say worked very well for us.

I stumbled upon another solution, which is quite nice.

Basically, only do step 2 from the blog posted mentioned, and define a custom ObjectMapper as a Spring @Component. (Things started working when I just removed all the AnnotationMethodHandlerAdapter stuff from step 3.)

@Component
@Primary
public class CustomObjectMapper extends ObjectMapper {
    public CustomObjectMapper() {
        setSerializationInclusion(JsonInclude.Include.NON_NULL); 
        configure(DeserializationFeature.FAIL_ON_UNKNOWN_PROPERTIES, false); 
    }
}

Works as long as the component is in a package scanned by Spring. (Using @Primary is not mandatory in my case, but why not make things explicit.)

For me there are two benefits compared to the other approach:

• This is simpler; I can just extend a class from Jackson and don't need to know about highly Spring-specific stuff like Jackson2ObjectMapperBuilder.
• I want to use the same Jackson configs for deserialising JSON in another part of my app, and this way it's very simple: new CustomObjectMapper() instead of new ObjectMapper().

Your arrayList:

ArrayList<String> yourArray = new ArrayList<>();

Write this code from where you want intent:

Intent newIntent = new Intent(this, NextActivity.class);
newIntent.putExtra("name",yourArray);
startActivity(newIntent);

In Next Activity:

ArrayList<String> myArray = new ArrayList<>();

Write this code in onCreate:

myArray =(ArrayList<String>)getIntent().getSerializableExtra("name");

Here is some ways, as far as I know now.

• Android Studio 3.3.2 (testing is OK)

method: 1

just following steps of the official docs, as bellow link shows

https://developer.android.com/studio/intro/studio-config#jdk

method: 2

following steps of the screen shortcuts, as bellow shows

method: 3

following steps of the screen shortcut, as bellow shows

I'm using the following to execute commands on the remote from my local computer:

ssh -i ~/.ssh/$GIT_PRIVKEY user@$IP "bash -s" < localpath/script.sh $arg1 $arg2

As the thread mentioned in the comment, get-command in powershell can also work it out. For example, you can type get-command npm and the output is as below:

Most of the time, the best solution is using distinct() from dplyr, as has already been suggested.

However, here's another approach that uses the slice() function from dplyr.

# Generate fake data for the example
  library(dplyr)
  set.seed(123)
  df <- data.frame(
    x = sample(0:1, 10, replace = T),
    y = sample(0:1, 10, replace = T),
    z = 1:10
  )

# In each group of rows formed by combinations of x and y
# retain only the first row

    df %>%
      group_by(x, y) %>%
      slice(1)

Difference from using the distinct() function

The advantage of this solution is that it makes it explicit which rows are retained from the original dataframe, and it can pair nicely with the arrange() function.

Let's say you had customer sales data and you wanted to retain one record per customer, and you want that record to be the one from their latest purchase. Then you could write:

customer_purchase_data %>%
   arrange(desc(Purchase_Date)) %>%
   group_by(Customer_ID) %>%
   slice(1)

I had a similar problem to solve, here is a simple solution of how to pass variables to template files, the trick is to write the template file taking advantage of the variable. You need to create a dictionary (list is also possible), which holds the set of variables corresponding to each of the file. Then within the template file access them.

see below:

the template file: test_file.j2
# {{ ansible_managed }} created by [email protected]

{% set dkey  = (item | splitext)[0]  %}
{% set fname = test_vars[dkey].name  %}
{% set fip   = test_vars[dkey].ip    %}
{% set fport = test_vars[dkey].port  %}
filename: {{ fname }}
ip address: {{ fip }}
port: {{ fport }}

the playbook

---
#
# file: template_test.yml
# author: [email protected]
#
# description: playbook to demonstrate passing variables to template files
#
# this playbook will create 3 files from a single template, with different
# variables passed for each of the invocation
#
# usage:
# ansible-playbook -i "localhost," template_test.yml

- name: template variables testing
  hosts: all
  gather_facts: false

  vars:
    ansible_connection: local
    dest_dir: "/tmp/ansible_template_test/"
    test_files:
      - file_01.txt
      - file_02.txt
      - file_03.txt
    test_vars:
      file_01:
        name: file_01.txt
        ip: 10.0.0.1
        port: 8001
      file_02:
        name: file_02.txt
        ip: 10.0.0.2
        port: 8002
      file_03:
        name: file_03.txt
        ip: 10.0.0.3
        port: 8003

  tasks:
    - name: copy the files
      template:
        src: test_file.j2
        dest: "{{ dest_dir }}/{{ item }}"
      with_items:
        - "{{ test_files }}"

The following steps fix the problem for Visual Studio 2015 and Visual Studio 2017:

• Close VS.
• Navigate to the folder of the solution and delete the hidden .vs folder.
• Restart VS.
• Hit F5 and IIS Express should load as normal, allowing you to debug.

Note: Based on my experience and others in the comments, this problem seems to be caused by moving a project between workstations, environments, or versions of Visual Studio. There must be some environment specific information contained in the .vs folder.

seems you need to link with the obj file that implements tolayer5()

Update: your function declaration doesn't match the implementation:

      void tolayer5(int AorB, struct msg msgReceived)
      void tolayer5(int, char data[])

So compiler would treat them as two different functions (you are using c++). and it cannot find the implementation for the one you called in main().

If you have a number, for example 65, and if you want to get the corresponding ASCII character, you can use the chr function, like this

>>> chr(65)
'A'

similarly if you have 97,

>>> chr(97)
'a'

EDIT: The above solution works for 8 bit characters or ASCII characters. If you are dealing with unicode characters, you have to specify unicode value of the starting character of the alphabet to ord and the result has to be converted using unichr instead of chr.

>>> print unichr(ord(u'\u0B85'))
?

>>> print unichr(1 + ord(u'\u0B85'))
?

NOTE: The unicode characters used here are of the language called "Tamil", my first language. This is the unicode table for the same http://www.unicode.org/charts/PDF/U0B80.pdf

One important note, the solution mentioned above will not work on local host, you have to upload your code to server and then it will work. I was getting no error, than bad request, the problem was I was using localhost (test.dev,myproject.git). Both solution above work, the solution that uses SSL cert is recommended.

1. Go to https://curl.haxx.se/docs/caextract.html, download the latest cacert.pem. Store is somewhere (not in public folder - but will work regardless)

2. Use this code

".$result; //echo "
Path:".$_SERVER['DOCUMENT_ROOT'] . "/ssl/cacert.pem"; // this is for troubleshooting only ?>

3. Upload the code to live server and test.

Put it in a separate, custom header.

Overloading the standard HTTP headers is probably going to cause more confusion than it's worth, and will violate the principle of least surprise. It might also lead to interoperability problems for your API client programmers who want to use off-the-shelf tool kits that can only deal with the standard form of typical HTTP headers (such as Authorization).

There is no "canonical" way to do the matrix in C++, STL does not provide classes like "matrix". However there are some 3rd party libraries that do. You are encouraged to use them or write your own implementation. You can try my implementation derived from some public implementation found on the internet.

Supposedly high-performance code which I adapted in JavaScript (article below):

function pointInTriangle (p, p0, p1, p2) {
  return (((p1.y - p0.y) * (p.x - p0.x) - (p1.x - p0.x) * (p.y - p0.y)) | ((p2.y - p1.y) * (p.x - p1.x) - (p2.x - p1.x) * (p.y - p1.y)) | ((p0.y - p2.y) * (p.x - p2.x) - (p0.x - p2.x) * (p.y - p2.y))) >= 0;
}

• pointInTriangle(p, p0, p1, p2) - for counter-clockwise triangles
• pointInTriangle(p, p0, p1, p2) - for clockwise triangles

Look in jsFiddle (performance test included), there's also winding checking in a separate function. Or press "Run code snippet" below

var ctx = $("canvas")[0].getContext("2d");_x000D_
var W = 500;_x000D_
var H = 500;_x000D_
_x000D_
var point = { x: W / 2, y: H / 2 };_x000D_
var triangle = randomTriangle();_x000D_
_x000D_
$("canvas").click(function(evt) {_x000D_
    point.x = evt.pageX - $(this).offset().left;_x000D_
    point.y = evt.pageY - $(this).offset().top;_x000D_
    test();_x000D_
});_x000D_
_x000D_
$("canvas").dblclick(function(evt) {_x000D_
    triangle = randomTriangle();_x000D_
    test();_x000D_
});_x000D_
_x000D_
document.querySelector('#performance').addEventListener('click', _testPerformance);_x000D_
_x000D_
test();_x000D_
_x000D_
function test() {_x000D_
    var result = checkClockwise(triangle.a, triangle.b, triangle.c) ? pointInTriangle(point, triangle.a, triangle.c, triangle.b) : pointInTriangle(point, triangle.a, triangle.b, triangle.c);_x000D_
    _x000D_
    var info = "point = (" + point.x + "," + point.y + ")\n";_x000D_
    info += "triangle.a = (" + triangle.a.x + "," + triangle.a.y + ")\n";_x000D_
    info += "triangle.b = (" + triangle.b.x + "," + triangle.b.y + ")\n";_x000D_
    info += "triangle.c = (" + triangle.c.x + "," + triangle.c.y + ")\n";_x000D_
    info += "result = " + (result ? "true" : "false");_x000D_
_x000D_
    $("#result").text(info);_x000D_
    render();_x000D_
}_x000D_
_x000D_
function _testPerformance () {_x000D_
 var px = [], py = [], p0x = [], p0y = [], p1x = [], p1y = [], p2x = [], p2y = [], p = [], p0 = [], p1 = [], p2 = [];_x000D_
    _x000D_
 for(var i = 0; i < 1000000; i++) {_x000D_
    p[i] = {x: Math.random() * 100, y: Math.random() * 100};_x000D_
    p0[i] = {x: Math.random() * 100, y: Math.random() * 100};_x000D_
    p1[i] = {x: Math.random() * 100, y: Math.random() * 100};_x000D_
    p2[i] = {x: Math.random() * 100, y: Math.random() * 100};_x000D_
  }_x000D_
  console.time('optimal: pointInTriangle');_x000D_
  for(var i = 0; i < 1000000; i++) {_x000D_
    pointInTriangle(p[i], p0[i], p1[i], p2[i]);_x000D_
  }_x000D_
  console.timeEnd('optimal: pointInTriangle');_x000D_
_x000D_
  console.time('original: ptInTriangle');_x000D_
  for(var i = 0; i < 1000000; i++) {_x000D_
   ptInTriangle(p[i], p0[i], p1[i], p2[i]);_x000D_
  }_x000D_
  console.timeEnd('original: ptInTriangle');_x000D_
}_x000D_
_x000D_
function pointInTriangle (p, p0, p1, p2) {_x000D_
 return (((p1.y - p0.y) * (p.x - p0.x) - (p1.x - p0.x) * (p.y - p0.y)) | ((p2.y - p1.y) * (p.x - p1.x) - (p2.x - p1.x) * (p.y - p1.y)) | ((p0.y - p2.y) * (p.x - p2.x) - (p0.x - p2.x) * (p.y - p2.y))) >= 0;_x000D_
}_x000D_
_x000D_
function ptInTriangle(p, p0, p1, p2) {_x000D_
    var s = (p0.y * p2.x - p0.x * p2.y + (p2.y - p0.y) * p.x + (p0.x - p2.x) * p.y);_x000D_
    var t = (p0.x * p1.y - p0.y * p1.x + (p0.y - p1.y) * p.x + (p1.x - p0.x) * p.y);_x000D_
_x000D_
    if (s <= 0 || t <= 0) return false;_x000D_
_x000D_
    var A = (-p1.y * p2.x + p0.y * (-p1.x + p2.x) + p0.x * (p1.y - p2.y) + p1.x * p2.y);_x000D_
    return (s + t) < A;_x000D_
}_x000D_
_x000D_
function render() {_x000D_
    ctx.fillStyle = "#CCC";_x000D_
    ctx.fillRect(0, 0, 500, 500);_x000D_
    drawTriangle(triangle.a, triangle.b, triangle.c);_x000D_
    drawPoint(point);_x000D_
}_x000D_
_x000D_
function checkClockwise(p0, p1, p2) {_x000D_
    var A = (-p1.y * p2.x + p0.y * (-p1.x + p2.x) + p0.x * (p1.y - p2.y) + p1.x * p2.y);_x000D_
    return A > 0;_x000D_
}_x000D_
_x000D_
function drawTriangle(p0, p1, p2) {_x000D_
    ctx.fillStyle = "#999";_x000D_
    ctx.beginPath();_x000D_
    ctx.moveTo(p0.x, p0.y);_x000D_
    ctx.lineTo(p1.x, p1.y);_x000D_
    ctx.lineTo(p2.x, p2.y);_x000D_
    ctx.closePath();_x000D_
    ctx.fill();_x000D_
    ctx.fillStyle = "#000";_x000D_
    ctx.font = "12px monospace";_x000D_
    ctx.fillText("1", p0.x, p0.y);_x000D_
    ctx.fillText("2", p1.x, p1.y);_x000D_
    ctx.fillText("3", p2.x, p2.y);_x000D_
}_x000D_
_x000D_
function drawPoint(p) {_x000D_
    ctx.fillStyle = "#F00";_x000D_
    ctx.beginPath();_x000D_
    ctx.arc(p.x, p.y, 5, 0, 2 * Math.PI);_x000D_
    ctx.fill();_x000D_
}_x000D_
_x000D_
function rand(min, max) {_x000D_
 return Math.floor(Math.random() * (max - min + 1)) + min;_x000D_
}_x000D_
_x000D_
function randomTriangle() {_x000D_
    return {_x000D_
        a: { x: rand(0, W), y: rand(0, H) },_x000D_
        b: { x: rand(0, W), y: rand(0, H) },_x000D_
        c: { x: rand(0, W), y: rand(0, H) }_x000D_
    };_x000D_
}

<script src="https://cdnjs.cloudflare.com/ajax/libs/jquery/1.9.1/jquery.min.js"></script>_x000D_
<button id="performance">Run performance test (open console)</button>_x000D_
<pre>Click: place the point._x000D_
Double click: random triangle.</pre>_x000D_
<pre id="result"></pre>_x000D_
<canvas width="500" height="500"></canvas>

Inspired by this: http://www.phatcode.net/articles.php?id=459

There are a couple ways you can do this. The simplest way to do so is to use the dockerfile ADD command like so:

ADD . /path/inside/docker/container

However, any changes made to this directory on the host after building the dockerfile will not show up in the container. This is because when building a container, docker compresses the directory into a .tar and uploads that context into the container permanently.

The second way to do this is the way you attempted, which is to mount a volume. Due to trying to be as portable as possible you cannot map a host directory to a docker container directory within a dockerfile, because the host directory can change depending on which machine you are running on. To map a host directory to a docker container directory you need to use the -v flag when using docker run, e.g.,:

# Run a container using the `alpine` image, mount the `/tmp`
# directory from your host into the `/container/directory`
# directory in your container, and run the `ls` command to
# show the contents of that directory.
docker run \
    -v /tmp:/container/directory \
    alpine \
    ls /container/directory

That way it's simpler, where you pass the image and then pass the format.

private static string ImageToBase64(Image image)
{
    var imageStream = new MemoryStream();
    try
    {           
        image.Save(imageStream, System.Drawing.Imaging.ImageFormat.Bmp);
        imageStream.Position = 0;
        var imageBytes = imageStream.ToArray();
        var ImageBase64 = Convert.ToBase64String(imageBytes);
        return ImageBase64;
    }
    catch (Exception ex)
    {
        return "Error converting image to base64!";
    }
    finally
    {
      imageStream.Dispose;
    }
}

To convert from integers < 256 to binary, use the chr function. So you're looking at doing the following.

newFileBytes=[123,3,255,0,100]
newfile=open(path,'wb')
newfile.write((''.join(chr(i) for i in newFileBytes)).encode('charmap'))

Just remember, if the field you want to make nullable is part of a primary key, you can't. Primary Keys cannot have null fields.

In Place of using this

MsgBox(json.SelectToken("Venue").SelectToken("ID"))

You can also use

MsgBox(json.SelectToken("Venue.ID"))

This solved it for me.

from selenium import webdriver
driver = webdriver.Firefox(executable_path=r'your\path\geckodriver.exe')
driver.get('http://inventwithpython.com')

Postman is the best application to test your APIs !

You can import or export your routes and let him remember all your body requests ! :)

EDIT : This comment is 5 yea's old and deprecated :D

Here's the new Postman App : https://www.postman.com/

You may be overcomplicating things, is there any reason you need the stringr package?

 df <- data.frame(Date = c("10/9/2009 0:00:00", "10/15/2009 0:00:00"))
 as.Date(df$Date, "%m/%d/%Y %H:%M:%S")

[1] "2009-10-09" "2009-10-15"

More generally and if you need the time component as well, use strptime:

strptime(df$Date, "%m/%d/%Y %H:%M:%S")

I'm guessing at what your actual data might look at from the partial results you give.

objdump -T *.so may also do the job

I just wanted to update this for the latest cool stuff in Rails 4.2, you can now do this inside any of your config/**/*.rb files:

config.x.whatever.you.want = 42

...and this will be available in your app as:

Rails.configuration.x.whatever.you.want

See more here: http://guides.rubyonrails.org/configuring.html#custom-configuration

I do not see how this problem is related to facebook AJAX. In fact the issue also occurs with JavaScript disabled and purely redirect based logins.

An example exchange with facebook:

1. GET <https://www.facebook.com/dialog/oauth?client_id=MY_APP_ID&scope=email&redirect_uri=MY_REDIRECT_URL> RESPONSE 302 Found Location: <https://www.facebook.com/connect/uiserver.php?[...]>  
2. GET <https://www.facebook.com/connect/uiserver.php?[...]> RESPONSE 302 Found MY_REDIRECT_URL?code=FB_CODE#_  
3. GET MY_REDIRECT_URL?code=FB_CODE#_  

Happens only with Firefox for me too.

I had this issue when I upgraded to v3.0.0.preview4, so a downgrade to a stable version fixed this.

admin:

takeown /r /f folder
cacls folder /c /G "ADMINNAME":F /T
rmdir /s folder

Works for anything including sys files

EDIT: I actually found the best way which also solves file path too long problem as well:

mkdir \empty
robocopy /mir \empty folder

brew install caskroom/cask/brew-cask
brew tap caskroom/versions
brew cask install sublime-text

Weird how I will struggle with this for days, post on StackOverflow, then figure out my own answer in 20 seconds.

[edited to reflect that the package name is now just sublime-text, not sublime-text3]

Actually, you should use the translate directive for such stuff instead.

<h1 translate="{{pageTitle}}"></h1>

The directive takes care of asynchronous execution and is also clever enough to unwatch translation ids on the scope if the translation has no dynamic values.

However, if there's no way around and you really have to use $translate service in the controller, you should wrap the call in a $translateChangeSuccess event using $rootScope in combination with $translate.instant() like this:

.controller('foo', function ($rootScope, $scope, $translate) {
  $rootScope.$on('$translateChangeSuccess', function () {
    $scope.pageTitle = $translate.instant('PAGE.TITLE');
  });
})

So why $rootScope and not $scope? The reason for that is, that in angular-translate's events are $emited on $rootScope rather than $broadcasted on $scope because we don't need to broadcast through the entire scope hierarchy.

Why $translate.instant() and not just async $translate()? When $translateChangeSuccess event is fired, it is sure that the needed translation data is there and no asynchronous execution is happening (for example asynchronous loader execution), therefore we can just use $translate.instant() which is synchronous and just assumes that translations are available.

Since version 2.8.0 there is also $translate.onReady(), which returns a promise that is resolved as soon as translations are ready. See the changelog.

dicts = {}
keys = range(4)
values = ["Hi", "I", "am", "John"]
for i in keys:
        dicts[i] = values[i]
print(dicts)

alternatively

In [7]: dict(list(enumerate(values)))
Out[7]: {0: 'Hi', 1: 'I', 2: 'am', 3: 'John'}

Have a look at jQuery, a cross-browser library that will make your life a lot easier.

var msg = 'abc';
$('#msg').val(msg);
$('#sp_100').attr('checked', 'checked');

App-Prefs:root=Privacy&path=LOCATION worked for me for getting to general location settings. Note: only works on a device.

For Fedora (can be useful for someone)

sudo dnf install zlib-1.2.8-10.fc24.i686 libgcc-6.1.1-2.fc24.i686

Use this code:

// Get current size of heap in bytes
long heapSize = Runtime.getRuntime().totalMemory(); 

// Get maximum size of heap in bytes. The heap cannot grow beyond this size.// Any attempt will result in an OutOfMemoryException.
long heapMaxSize = Runtime.getRuntime().maxMemory();

 // Get amount of free memory within the heap in bytes. This size will increase // after garbage collection and decrease as new objects are created.
long heapFreeSize = Runtime.getRuntime().freeMemory(); 

It was useful to me to know it.

You can use like this:

public static String executeHttpPost1(String url,
            HashMap<String, String> postParameters) throws UnsupportedEncodingException {
        // TODO Auto-generated method stub

        HttpClient client = getNewHttpClient();

        try{
        request = new HttpPost(url);

        }
        catch(Exception e){
            e.printStackTrace();
        }


        if(postParameters!=null && postParameters.isEmpty()==false){

            List<NameValuePair> nameValuePairs = new ArrayList<NameValuePair>(postParameters.size());
            String k, v;
            Iterator<String> itKeys = postParameters.keySet().iterator();
            while (itKeys.hasNext()) 
            {
                k = itKeys.next();
                v = postParameters.get(k);
                nameValuePairs.add(new BasicNameValuePair(k, v));
            }     

            UrlEncodedFormEntity urlEntity  = new  UrlEncodedFormEntity(nameValuePairs);
            request.setEntity(urlEntity);

        }
        try {


            Response = client.execute(request,localContext);
            HttpEntity entity = Response.getEntity();
            int statusCode = Response.getStatusLine().getStatusCode();
            Log.i(TAG, ""+statusCode);


            Log.i(TAG, "------------------------------------------------");





                try{
                    InputStream in = (InputStream) entity.getContent(); 
                    //Header contentEncoding = Response.getFirstHeader("Content-Encoding");
                    /*if (contentEncoding != null && contentEncoding.getValue().equalsIgnoreCase("gzip")) {
                        in = new GZIPInputStream(in);
                    }*/
                    BufferedReader reader = new BufferedReader(new InputStreamReader(in));
                    StringBuilder str = new StringBuilder();
                    String line = null;
                    while((line = reader.readLine()) != null){
                        str.append(line + "\n");
                    }
                    in.close();
                    response = str.toString();
                    Log.i(TAG, "response"+response);
                }
                catch(IllegalStateException exc){

                    exc.printStackTrace();
                }


        } catch(Exception e){

            Log.e("log_tag", "Error in http connection "+response);         

        }
        finally {

        }

        return response;
    }

You can use PHPunit default way of showing messages to debug your variables inside your test like this:

$this->assertTrue(false,$your_variable);

I would like to mention one case where you must use std::move() otherwise it will give an error. Case: If the return type of the function differs from the type of the local variable.

class Base { ... };
class Derived : public Base { ... };
...
std::unique_ptr<Base> Foo() {
     std::unique_ptr<Derived> derived(new Derived());
     return std::move(derived); //std::move() must
}

Reference: https://www.chromium.org/developers/smart-pointer-guidelines

Maybe my response quite late, but it covers API below and above 21 level.

To add headers we should intercept every request and create new one with required headers.

So we need to override shouldInterceptRequest method called in both cases: 1. for API until level 21; 2. for API level 21+

    webView.setWebViewClient(new WebViewClient() {

        // Handle API until level 21
        @SuppressWarnings("deprecation")
        @Override
        public WebResourceResponse shouldInterceptRequest(WebView view, String url) {

            return getNewResponse(url);
        }

        // Handle API 21+
        @TargetApi(Build.VERSION_CODES.LOLLIPOP)
        @Override
        public WebResourceResponse shouldInterceptRequest(WebView view, WebResourceRequest request) {

            String url = request.getUrl().toString();

            return getNewResponse(url);
        }

        private WebResourceResponse getNewResponse(String url) {

            try {
                OkHttpClient httpClient = new OkHttpClient();

                Request request = new Request.Builder()
                        .url(url.trim())
                        .addHeader("Authorization", "YOU_AUTH_KEY") // Example header
                        .addHeader("api-key", "YOUR_API_KEY") // Example header
                        .build();

                Response response = httpClient.newCall(request).execute();

                return new WebResourceResponse(
                        null,
                        response.header("content-encoding", "utf-8"),
                        response.body().byteStream()
                );

            } catch (Exception e) {
                return null;
            }

        }
   });

If response type should be processed you could change

        return new WebResourceResponse(
                null, // <- Change here
                response.header("content-encoding", "utf-8"),
                response.body().byteStream()
        );

to

        return new WebResourceResponse(
                getMimeType(url), // <- Change here
                response.header("content-encoding", "utf-8"),
                response.body().byteStream()
        );

and add method

        private String getMimeType(String url) {
            String type = null;
            String extension = MimeTypeMap.getFileExtensionFromUrl(url);

            if (extension != null) {

                switch (extension) {
                    case "js":
                        return "text/javascript";
                    case "woff":
                        return "application/font-woff";
                    case "woff2":
                        return "application/font-woff2";
                    case "ttf":
                        return "application/x-font-ttf";
                    case "eot":
                        return "application/vnd.ms-fontobject";
                    case "svg":
                        return "image/svg+xml";
                }

                type = MimeTypeMap.getSingleton().getMimeTypeFromExtension(extension);
            }

            return type;
        }

A UDF will only return a value it won't allow you to change the properties of a cell/sheet/workbook. Move your code to a Worksheet_Change event or similar to change properties.

Eg

Private Sub worksheet_change(ByVal target As Range)
  target.Font.Bold = True
End Sub

This was already a month ago, but oh well.

I could be wrong, but for your question I get the feeling that bind_param isn't really the problem here. You always need to define some conditions, be it directly in the query string itself, of using bind_param to set the ? placeholders. That's not really an issue.

The problem I had using MySQLi SELECT * queries is the bind_result part. That's where it gets interesting. I came across this post from Jeffrey Way: http://jeff-way.com/2009/05/27/tricky-prepared-statements/(This link is no longer active). The script basically loops through the results and returns them as an array — no need to know how many columns there are, and you can still use prepared statements.

In this case it would look something like this:

$stmt = $mysqli->prepare(
  'SELECT * FROM tablename WHERE field1 = ? AND field2 = ?');
$stmt->bind_param('ss', $value, $value2);
$stmt->execute();

Then use the snippet from the site:

$meta = $stmt->result_metadata();

while ($field = $meta->fetch_field()) {
  $parameters[] = &$row[$field->name];
}

call_user_func_array(array($stmt, 'bind_result'), $parameters);

while ($stmt->fetch()) {
  foreach($row as $key => $val) {
    $x[$key] = $val;
  }
  $results[] = $x;
}

And $results now contains all the info from SELECT *. So far I found this to be an ideal solution.

If I remember correctly, you'll need to set the netbeans_jdkhome property in your netbeans config file. Should be in your etc/netbeans.conf file.

In a project, I actually have some heading fixed to the bottom of the screen on page load (it's a drawing app so the heading is at the bottom to give maximum space to the canvas element on wide viewport).

I needed the heading to become 'absolute' when it reaches the footer on scroll, since I don't want the heading over the footer (heading colour is same as footer background colour).

I took the oldest response on here (edited by Gearge Millo) and that code snippet worked for my use-case. With some playing around I got this working. Now the fixed heading sits beautifully above the footer once it reaches the footer.

Just thought I'd share my use-case and how it worked, and say thank you! The app: http://joefalconer.com/web_projects/drawingapp/index.html

    /* CSS */
    @media screen and (min-width: 1100px) {
        #heading {
            height: 80px;
            width: 100%;
            position: absolute;  /* heading is 'absolute' on page load. DOESN'T WORK if I have this on 'fixed' */
            bottom: 0;
        }
    }

    // jQuery
    // Stop the fixed heading from scrolling over the footer
    $.fn.followTo = function (pos) {
      var $this = this,
      $window = $(window);

      $window.scroll(function (e) {
        if ($window.scrollTop() > pos) {
          $this.css( { position: 'absolute', bottom: '-180px' } );
        } else {
          $this.css( { position: 'fixed', bottom: '0' } );
        }
      });
    };
    // This behaviour is only needed for wide view ports
    if ( $('#heading').css("position") === "absolute" ) {
      $('#heading').followTo(180);
    }

var script = (<HTMLScriptElement[]><any>document.getElementsByName(id))[0];    

window.location.href = window.location.href

The above answers are a bit annoying because they don't explain what you do inside the for loop after you ensure it's an object: YOU DON'T ACCESS IT DIRECTLY! You are actually only delivered the KEY that you need to apply to the OBJ:

var obj = {
  a: "foo",
  b: "bar",
  c: "foobar"
};

// We need to iterate the string keys (not the objects)
for(var someKey in obj)
{
  // We check if this key exists in the obj
  if (obj.hasOwnProperty(someKey))
  {
    // someKey is only the KEY (string)! Use it to get the obj:
    var myActualPropFromObj = obj[someKey]; // Since dynamic, use [] since the key isn't literally named "someKey"

    // NOW you can treat it like an obj
    var shouldBeBar = myActualPropFromObj.b;
  }
}

This is all ECMA5 safe. Even works in the lame JS versions like Rhino ;)

The new version 2.4 of Apache HTTP Server has a module called mod_proxy_wstunnel which is a websocket proxy.

http://httpd.apache.org/docs/2.4/mod/mod_proxy_wstunnel.html

According to MDN, <input type="search" /> is currently supported in all modern browsers:

<input type="search" value="Clear this." />

However, if you want different behavior that is consistent across browsers here are some light-weight alternatives that only require JavaScript:

Option 1 - Always display the 'x': (example here)

Array.prototype.forEach.call(document.querySelectorAll('.clearable-input>[data-clear-input]'), function(el) {
  el.addEventListener('click', function(e) {
    e.target.previousElementSibling.value = '';
  });
});

.clearable-input {
  position: relative;
  display: inline-block;
}
.clearable-input > input {
  padding-right: 1.4em;
}
.clearable-input > [data-clear-input] {
  position: absolute;
  top: 0;
  right: 0;
  font-weight: bold;
  font-size: 1.4em;
  padding: 0 0.2em;
  line-height: 1em;
  cursor: pointer;
}
.clearable-input > input::-ms-clear {
  display: none;
}

<p>Always display the 'x':</p>

<div class="clearable-input">
  <input type="text" />
  <span data-clear-input>&times;</span>
</div>

<div class="clearable-input">
  <input type="text" value="Clear this." />
  <span data-clear-input>&times;</span>
</div>

Option 2 - Only display the 'x' when hovering over the field: (example here)

Array.prototype.forEach.call(document.querySelectorAll('.clearable-input>[data-clear-input]'), function(el) {
  el.addEventListener('click', function(e) {
    e.target.previousElementSibling.value = '';
  });
});

.clearable-input {
  position: relative;
  display: inline-block;
}
.clearable-input > input {
  padding-right: 1.4em;
}
.clearable-input:hover > [data-clear-input] {
  display: block;
}
.clearable-input > [data-clear-input] {
  display: none;
  position: absolute;
  top: 0;
  right: 0;
  font-weight: bold;
  font-size: 1.4em;
  padding: 0 0.2em;
  line-height: 1em;
  cursor: pointer;
}
.clearable-input > input::-ms-clear {
  display: none;
}

<p>Only display the 'x' when hovering over the field:</p>

<div class="clearable-input">
  <input type="text" />
  <span data-clear-input>&times;</span>
</div>

<div class="clearable-input">
  <input type="text" value="Clear this." />
  <span data-clear-input>&times;</span>
</div>

Option 3 - Only display the 'x' if the input element has a value: (example here)

Array.prototype.forEach.call(document.querySelectorAll('.clearable-input'), function(el) {
  var input = el.querySelector('input');

  conditionallyHideClearIcon();
  input.addEventListener('input', conditionallyHideClearIcon);
  el.querySelector('[data-clear-input]').addEventListener('click', function(e) {
    input.value = '';
    conditionallyHideClearIcon();
  });

  function conditionallyHideClearIcon(e) {
    var target = (e && e.target) || input;
    target.nextElementSibling.style.display = target.value ? 'block' : 'none';
  }
});

.clearable-input {
  position: relative;
  display: inline-block;
}
.clearable-input > input {
  padding-right: 1.4em;
}
.clearable-input >[data-clear-input] {
  display: none;
  position: absolute;
  top: 0;
  right: 0;
  font-weight: bold;
  font-size: 1.4em;
  padding: 0 0.2em;
  line-height: 1em;
  cursor: pointer;
}
.clearable-input > input::-ms-clear {
  display: none;
}

<p>Only display the 'x' if the `input` element has a value:</p>

<div class="clearable-input">
  <input type="text" />
  <span data-clear-input>&times;</span>
</div>

<div class="clearable-input">
  <input type="text" value="Clear this." />
  <span data-clear-input>&times;</span>
</div>

You can export to PNG without alpha in Preview. Simply open your image, choose export, select PNG, uncheck Alpha, and click Save. Preview also support batch export if you open all your images at once.

UPDATE: 7/20/2018 - Added links and updated name for coverageReporters.

UPDATE: 8/14/2017 - This answer is totally outdated. Just look at the Jest docs now. They have official support and documentation about how to do this.

@hankhsiao has got a forked repo where Istanbul is working with Jest. Add this to your dev dependencies

 "devDependencies": {
     "jest-cli": "git://github.com/hankhsiao/jest.git"
 }

Also make sure coverage is enabled in your package.json jest entry and you can also specify formats you want. (The html is pretty bad ass).

 "jest": {
     "collectCoverage": true,
     "coverageReporters": ["json", "html"],
 }

See Jest documentation for coverageReporters (default is ["json", "lcov", "text"])

Or add --coverage when you invoke jest.

NEW ANSWER Use Glide library for this. This lib is also recommended by Google. See How to round an image with Glide library?

OLD ANSWER Just add that image in a cardView and set cardView's elevation on 0dp...will do the trick (in my case was a viewPager with images - just replace the viewPager with an ImageView):

<android.support.v7.widget.CardView
    android:layout_width="match_parent"
    android:layout_height="250dp"
    app:cardElevation="0dp">

    <android.support.v4.view.ViewPager
        xmlns:android="http://schemas.android.com/apk/res/android"
        android:id="@+id/viewPager"
        android:layout_width="match_parent"
        android:layout_height="match_parent" />

</android.support.v7.widget.CardView>

Found a likely answer in /jstillwell's posts here: https://github.com/stefanocudini/leaflet-gps/issues/15 basically this feature will not be supported (in Chrome only?) in the future, but only for HTTP sites. HTTPS will still be ok, and there are no plans to create an equivalent replacement for HTTP use.

You should stop using this metric, it is meaningless for the most part. Cohesion, coupling and complexity are more important metrics than lines of code.

The param ?v=1.123 indicates a query string, and the browser will therefore think it is a new path from, say, ?v=1.0. Thus causing it to load from file, not from cache. As you want.

And, the browser will assume that the source will stay the same next time you call ?v=1.123 and should cache it with that string. So it will remain cached, however your server is set up, until you move to ?v=1.124 or so on.

Don't escape the underscore. Might be causing some whackness.

I have seen this on Windows, with msysgit 1.7.2.3. You have to fix the path to bin/curl-ca-bundle.crt. I had to specify the absolute path, using back-slashes:

git config --system http.sslcainfo "C:\Program Files (x86)\git\bin\curl-ca-bundle.crt"

This will result in changes to [git-install-dir]/etc/gitconfig file, which may be edited directly, too.

(Original solutions found at http://github.com/blog/642-smart-http-support)

The C++ Standard defines the remove() function, which may or may not delete a folder, depending on implementation. If it doesn't you need to use an implementation specific function such as rmdir().

For whatever reason $('.panel-collapse').collapse({'toggle': true, 'parent': '#accordion'}); only seems to work the first time and it only works to expand the collapsible. (I tried to start with a expanded collapsible and it wouldn't collapse.)

It could just be something that runs once the first time you initialize collapse with those parameters.

You will have more luck using the show and hide methods.

Here is an example:

$(function() {

  var $active = true;

  $('.panel-title > a').click(function(e) {
    e.preventDefault();
  });

  $('.collapse-init').on('click', function() {
    if(!$active) {
      $active = true;
      $('.panel-title > a').attr('data-toggle', 'collapse');
      $('.panel-collapse').collapse('hide');
      $(this).html('Click to disable accordion behavior');
    } else {
      $active = false;
      $('.panel-collapse').collapse('show');
      $('.panel-title > a').attr('data-toggle','');
      $(this).html('Click to enable accordion behavior');
    }
  });

});

http://bootply.com/98201

Update

Granted KyleMit seems to have a way better handle on this then me. I'm impressed with his answer and understanding.

I don't understand what's going on or why the show seemed to be toggling in some places.

But After messing around for a while.. Finally came with the following solution:

$(function() {
  var transition = false;
  var $active = true;

  $('.panel-title > a').click(function(e) {
    e.preventDefault();
  });

  $('#accordion').on('show.bs.collapse',function(){
    if($active){
        $('#accordion .in').collapse('hide');
    }
  });

  $('#accordion').on('hidden.bs.collapse',function(){
    if(transition){
        transition = false;
        $('.panel-collapse').collapse('show');
    }
  });

  $('.collapse-init').on('click', function() {
    $('.collapse-init').prop('disabled','true');
    if(!$active) {
      $active = true;
      $('.panel-title > a').attr('data-toggle', 'collapse');
      $('.panel-collapse').collapse('hide');
      $(this).html('Click to disable accordion behavior');
    } else {
      $active = false;
      if($('.panel-collapse.in').length){
        transition = true;
        $('.panel-collapse.in').collapse('hide');       
      }
      else{
        $('.panel-collapse').collapse('show');
      }
      $('.panel-title > a').attr('data-toggle','');
      $(this).html('Click to enable accordion behavior');
    }
    setTimeout(function(){
        $('.collapse-init').prop('disabled','');
    },800);
  });
});

http://bootply.com/98239

require 'pathname'

Pathname.new('/opt/local/bin/ruby').basename
# => #<Pathname:ruby>

I haven't been a Windows user in a long time, but the Pathname rdoc says it has no issues with directory-name separators on Windows.

Easy solution. In a data frame with 5 columns, If you want insert another column between 3 and 4...

tmp <- data[, 1:3]
tmp$example <- NA # or any value.
data <- cbind(tmp, data[, 4:5]

Here is my reason:

before:

var path = "D:\xxx\util.s"

which \u is a escape, I figured it out by using Codepen's analyze JS.

after:

var path = "D:\\xxx\\util.s"

and the error fixed

Duplicate question which basically says use ExecuteScalar() instead.

jsondata = '{"0001":{"FirstName":"John","LastName":"Mark","MiddleName":"Lewis","username":"johnlewis2","password":"2910"}}'
import json
import pandas as pd
jdata = json.loads(jsondata)
df = pd.DataFrame(jdata)
print df.T

This should look like this:.

         FirstName LastName MiddleName password    username
0001      John     Mark      Lewis     2910  johnlewis2

There are errors in your meta tag.

Yours:

<meta http-equiv="Content-Security-Policy" content="default-src *; style-src 'self' 'unsafe-inline'; script-src: 'self' 'unsafe-inline' 'unsafe-eval'>

Corrected:

<meta http-equiv="Content-Security-Policy" content="default-src *; style-src 'self' 'unsafe-inline'; script-src 'self' 'unsafe-inline' 'unsafe-eval'"/>

Note the colon after "script-src", and the end double-quote of the meta tag.

Find the PID of a process that uses a port on Windows (e.g. port: "9999")

netstat -aon | find "9999"

-a Displays all connections and listening ports.

-o Displays the owning process ID associated with each connection.

-n Displays addresses and port numbers in numerical form.

Output:

TCP    0.0.0.0:9999       0.0.0.0:0       LISTENING       15776

Then kill the process by PID

taskkill /F /PID 15776

/F - Specifies to forcefully terminate the process(es).

Note: You may need an extra permission (run from administrator) to kill some certain processes

Mainly If you are using Linux Based system Like 'Ubuntu' and this is only suggested for localhost user not for the server.

Follow all the steps mentioned in the previous answers. +

Check in Apache configuration for it. (AllowOverride All) If AllowOverride value is none then change it to All and restart apache again.

<Directory /var/www/>
    Options Indexes FollowSymLinks
    AllowOverride All
    Require all granted
</Directory>

Let me know if this step help anyone. As it can save you time if you find it earlier.

I am adding the exact lines from my htaccess file in localhost. for your reference

Around line number 110

<IfModule mod_rewrite.c>

############################################
## enable rewrites

Options +FollowSymLinks
RewriteEngine on

############################################
## you can put here your magento root folder
## path relative to web root

#RewriteBase /

RewriteEngine On
RewriteBase /
RewriteRule ^index\.php$ - [L]
RewriteCond %{REQUEST_FILENAME} !-f
RewriteCond %{REQUEST_FILENAME} !-d
RewriteRule . /index.php [L]

Images are for some user who understand easily from image the from the text:

import torch
>>>a = torch.Tensor([1,2,3,4,5])
>>>a.size()
torch.Size([5])
#use view to reshape

>>>b = a.view(1,a.shape[0])
>>>b
tensor([[1., 2., 3., 4., 5.]])
>>>b.size()
torch.Size([1, 5])
>>>b.type()
'torch.FloatTensor'

If you want force this behaviour on all of your figures try

...
\usepackage{float}
\floatplacement{figure}{H}
...

Use the find command,

find . -type f -name "*John*"

if you provide a bad path or a broken link, if the compiler cannot find the image, the picture box would display an X icon on its body.

PictureBox picture = new PictureBox
        {
            Name = "pictureBox",
            Size = new Size(100, 50),
            Location = new Point(14, 17),
            Image = Image.FromFile(@"c:\Images\test.jpg"),
            SizeMode = PictureBoxSizeMode.CenterImage
        };
p.Controls.Add(picture);

OR

PictureBox picture = new PictureBox
        {
            Name = "pictureBox",
            Size = new Size(100, 50),
            Location = new Point(14, 17),
            ImageLocation = @"c:\Images\test.jpg",
            SizeMode = PictureBoxSizeMode.CenterImage
        };
p.Controls.Add(picture);

i'm not sure where you put images in your folder structure but you can find the path as bellow

 picture.ImageLocation = Path.Combine(System.Windows.Forms.Application.StartupPath, "Resources\Images\1.jpg");

You may find this query useful:

SELECT * 
FROM sys.dm_exec_requests
WHERE DB_NAME(database_id) = 'YourDBName' 
AND blocking_session_id <> 0

    <android.support.v7.widget.AppCompatCheckBox
  android:id="@+id/checkBox"
  android:layout_width="match_parent"
  android:layout_height="wrap_content"
  android:layout_marginTop="10dp"
  android:layoutDirection="rtl"
  android:text="text" />`

This may also add to understanding of the difference between those two operators:

df <- data.frame(
      a = rnorm(10),
      b <- rnorm(10)
)

For the first element R has assigned values and proper name, while the name of the second element looks a bit strange.

str(df)
# 'data.frame': 10 obs. of  2 variables:
#  $ a             : num  0.6393 1.125 -1.2514 0.0729 -1.3292 ...
#  $ b....rnorm.10.: num  0.2485 0.0391 -1.6532 -0.3366 1.1951 ...

R version 3.3.2 (2016-10-31); macOS Sierra 10.12.1

If you would like to portably use the standard POSIX exit codes, see the exitstatus package on PyPI.

Install the package:

$ pip install exitstatus

Use in your code:

import sys
from exitstatus import ExitStatus

sys.exit(ExitStatus.success)

You can use the following

p{word-break: break-all;}

        <p>LoremipsumdolorLoremipsumdolorLoremipsumdolorLoremipsumdolorLoremipsumdolorLoremipsumdolorLoremipsumdolorLoremipsumdolorLoremipsumdolorLoremipsumdolorLoremipsumdolorLoremipsumdolorLoremipsumdolorLoremipsumdolorLoremipsumdolorLoremipsumdolorLoremipsumdolorLoremipsumdolorLoremipsumdolorLoremipsumdolorLoremipsumdolorLoremipsumdolorLoremipsumdolorLoremipsumdolorLoremipsumdolorLoremipsumdolorLoremipsumdolorLoremipsumdolorLoremipsumdolorLoremipsumdolorLoremipsumdolorLoremipsumdolorLoremipsumdolorLoremipsumdolorLoremipsumdolor</p>

You are suppose to use it like header(Location:../index.php) if it in another folder

Similar to the answer by @russian_spy :

<ul>
{% for choice in choices.items %} 
  <li>{{choice.0}} - {{choice.1}}</li>
{% endfor %}
</ul>

This might be suitable for breaking down more complex dictionaries.

Consider the following example: If you want to change a single CSS property(say, color to 'blue'), then the below statement works fine.

document.getElementById("ele_id").style.color="blue";

But, for changing multiple properies the more robust way is using Object.assign() or, object spread operator {...};

See below:

const ele=document.getElementById("ele_id");
const custom_style={
    display: "block",
    color: "red"
}

//Object.assign():
Object.assign(ele.style,custum_style);

Spread operator works similarly, just the syntax is a little different.

The script you downloaded lists the content of a specified folder. You probably put the unlink - call in one of the while-loops that list the files.

EDIT - Now that you posted your code:

echo '<a href="'.unlink($FileLink).'"><img src="images/icons/delete.gif"></a></td>';

Doing this calls the unlink-function each time the line is written, deleting your file. You have to write a link to a script that contains a delete function and pass some parameter that tells your script what to delete.

Example:

<a href="/path/to/script.php?delete='. $FileLink .'">delete</a>

You should not pass the path to a file this script and just delete it though, because malevolent being might use it to just delete everything or do other evil things.

1. Right click on the project and choose Open Module Settings.
2. Go to the Sources tab in your module.
3. Find your src folder.
4. Right click on it and mark it as Sources.

This solved the error in my case.

Simple way to differentiate UTF-8 and UTF-16 is to identify commonalities between them.

Other than sharing same unicode number for given character, each one is their own format.

UTF-8 try to represent, every unicode number given to character with one byte(If it is ASCII), else 2 two bytes, else 4 bytes and so on...

UTF-16 try to represent, every unicode number given to character with two byte to start with. If two bytes are not sufficient, then uses 4 bytes. IF that is also not sufficient, then uses 6 bytes.

Theoretically, UTF-16 is more space efficient, but in practical UTF-8 is more space efficient as most of the characters(98% of data) for processing are ASCII and UTF-8 try to represent them with single byte and UTF-16 try to represent them with 2 bytes.

Also, UTF-8 is superset of ASCII encoding. So every app that expects ASCII data would also accepted by UTF-8 processor. This is not true for UTF-16. UTF-16 could not understand ASCII, and this is big hurdle for UTF-16 adoption.

Another point to note is, all UNICODE as of now could be fit in 4 bytes of UTF-8 maximum(Considering all languages of world). This is same as UTF-16 and no real saving in space compared to UTF-8 ( https://stackoverflow.com/a/8505038/3343801 )

So, people use UTF-8 where ever possible.

Both the methods are defined in Object class. And both are in its simplest implementation. So when you need you want add some more implementation to these methods then you have override in your class.

For Ex: equals() method in object only checks its equality on the reference. So if you need compare its state as well then you can override that as it is done in String class.

v5.1 introduces the useful hook useLocation

https://reacttraining.com/blog/react-router-v5-1/#uselocation

import { Switch, useLocation } from 'react-router-dom'

function usePageViews() {
  let location = useLocation()

  useEffect(
    () => {
      ga.send(['pageview', location.pathname])
    },
    [location]
  )
}

function App() {
  usePageViews()
  return <Switch>{/* your routes here */}</Switch>
}

If you like eclipse style line (or block) duplicating using CTRL+ALT+UP or CTRL+UP+DOWN, below I post macros for this purpose:

Imports System
Imports EnvDTE
Imports EnvDTE80
Imports System.Diagnostics

Public Module DuplicateLineModule
    Sub DuplicateLineDown()
        Dim selection As TextSelection = DTE.ActiveDocument.Selection
        Dim lineNumber As Integer
        Dim line As String

        If selection.IsEmpty Then
            selection.StartOfLine(0)
            selection.EndOfLine(True)
        Else
            Dim top As Integer = selection.TopLine
            Dim bottom As Integer = selection.BottomLine

            selection.MoveToDisplayColumn(top, 0)
            selection.StartOfLine(0)

            selection.MoveToDisplayColumn(bottom, 0, True)
            selection.EndOfLine(True)
        End If

        lineNumber = selection.TopLine
        line = selection.Text

        selection.MoveToDisplayColumn(selection.BottomLine, 0)
        selection.EndOfLine()
        selection.Insert(vbNewLine & line)
    End Sub
    Sub DuplicateLineUp()
        Dim selection As TextSelection = DTE.ActiveDocument.Selection
        Dim lineNumber As Integer
        Dim line As String

        If selection.IsEmpty Then
            selection.StartOfLine(0)
            selection.EndOfLine(True)
        Else
            Dim top As Integer = selection.TopLine
            Dim bottom As Integer = selection.BottomLine

            selection.MoveToDisplayColumn(top, 0)
            selection.StartOfLine(0)

            selection.MoveToDisplayColumn(bottom, 0, True)
            selection.EndOfLine(True)
        End If

        lineNumber = selection.BottomLine
        line = selection.Text

        selection.MoveToDisplayColumn(selection.BottomLine, 0)
        selection.Insert(vbNewLine & line)
        selection.MoveToDisplayColumn(lineNumber, 0)
    End Sub
End Module

GNU awk 4.1

awk -niord '$0=chr("0x"RT)' RS=.. ORS=

Note that if you echo to this it will produce an extra null byte

$ echo 595a | awk -niord '$0=chr("0x"RT)' RS=.. ORS= | od -tx1c
0000000  59  5a  00
          Y   Z  \0

Instead use printf

$ printf 595a | awk -niord '$0=chr("0x"RT)' RS=.. ORS= | od -tx1c
0000000  59  5a
          Y   Z

Also note that GNU awk produces UTF-8 by default

$ printf a1 | awk -niord '$0=chr("0x"RT)' RS=.. ORS= | od -tx1
0000000 c2 a1

If you are dealing with characters outside of ASCII, and you are going to be Base64 encoding the resultant string, you can disable UTF-8 with -b

echo 5a | sha256sum | awk -bniord 'RT~/\w/,$0=chr("0x"RT)' RS=.. ORS=

Any constructor for any class as you know creates an object. So, the constructor should contain proper initialization code for its class. But if you have some class which extends another one (lets call it "parent") then constructor for the class cannot contain all the code needed for the initialization by definition (for example, you cannot define private fields of the parent). That's why constructor of the class has to call constructor of its parent. If you do not call it explicitly then the default parent constructor is called (which is without any parameter).

So, in your case, you can either implement default constructor in parent or directly call any constructor in the class.

Example in scala (useful in sbt file):

  import collection.JavaConverters._
  import java.net._

  def getIpAddress: String = {

    val enumeration = NetworkInterface.getNetworkInterfaces.asScala.toSeq

    val ipAddresses = enumeration.flatMap(p =>
      p.getInetAddresses.asScala.toSeq
    )

    val address = ipAddresses.find { address =>
      val host = address.getHostAddress
      host.contains(".") && !address.isLoopbackAddress
    }.getOrElse(InetAddress.getLocalHost)

    address.getHostAddress
  }

Or simply:

Date.now

From MDN documentation:

The Date.now() method returns the number of milliseconds elapsed since January 1, 1970

Available since ECMAScript 5.1

It's the same as was mentioned above (new Date().getTime()), but more shortcutted version.

You can just do this:

git remote add origin ssh://user@host:1234/srv/git/example

1234 is the ssh port being used

Here's more modern approach:

.parent {display: flow-root;} 

No more clearfixes.

p.s. Using overflow: hidden; hides the box-shadow so...

You should deploy "Client Profile" instead of "Full Framework" inside a corporation mostly in one case only: you want explicitly deny some .NET features are running on the client computers. The only real case is denying of ASP.NET on the client machines of the corporation, for example, because of security reasons or the existing corporate policy.

Saving of less than 8 MB on client computer can not be a serious reason of "Client Profile" deployment in a corporation. The risk of the necessity of the deployment of the "Full Framework" later in the corporation is higher than costs of 8 MB per client.

As it is already explained in other answers, const in C merely means that a variable is read-only. It is still a run-time value. However, you can use an enum as a real constant in C:

enum { NUM_TYPES = 4 };
static int types[NUM_TYPES] = { 
  1, 2, 3, 4
};

if (!$.trim($("element").val())) {

}