Different Means of Exiting

os._exit():

• Exit the process without calling the cleanup handlers.

exit(0):

• a clean exit without any errors / problems.

exit(1):

• There was some issue / error / problem and that is why the program is exiting.

sys.exit():

• When the system and python shuts down; it means less memory is being used after the program is run.

quit():

• Closes the python file.

Summary

Basically they all do the same thing, however, it also depends on what you are doing it for.

I don't think you left anything out and I would recommend getting used to quit() or exit().

You would use sys.exit() and os._exit() mainly if you are using big files or are using python to control terminal.

Otherwise mainly use exit() or quit().

Your first example which uses Enumerable.Repeat:

private string Tabs(uint numTabs)
{
    IEnumerable<string> tabs = Enumerable.Repeat(
                                 "\t", (int) numTabs);
    return (numTabs > 0) ? 
            tabs.Aggregate((sum, next) => sum + next) : ""; 
} 

can be rewritten more compactly with String.Concat:

private string Tabs(uint numTabs)
{       
    return String.Concat(Enumerable.Repeat("\t", (int) numTabs));
}

1. What exactly doesn't work?
2. Why are you using a 2d array?

3. If you must use a 2d array:

   int numOfPairs = 10;  String[][] array = new String[numOfPairs][2]; for(int i = 0; i < array.length; i++){     for(int j = 0; j < array[i].length; j++){         array[i] = new String[2];         array[i][0] = "original word";         array[i][1] = "rearranged word";     }    } 

Does this give you a hint?

Right click on the application, Props -> Compatibility -> Check the Run the program as administrator

If you go to Preferences (e.g. Window?Preferences) and view General?Keys

and then search for “Next Tab” and “Previous Tab”, you can remap them.

If you install eslint under your local project, you should have a directory /node_modules/eslint/conf/ and under that directory a file eslint.json. You could edit the file and modify "no-console" entry with the value "off" (although 0 value is supported too):

"rules": {
    "no-alert": "off",
    "no-array-constructor": "off",
    "no-bitwise": "off",
    "no-caller": "off",
    "no-case-declarations": "error",
    "no-catch-shadow": "off",
    "no-class-assign": "error",
    "no-cond-assign": "error",
    "no-confusing-arrow": "off",
    "no-console": "off",
    ....

I hope this "configuration" could help you.

Shortcut

\d for show all tables

\d tablename to describe table

\? for more shortcuts for redshift

This error message can also be caused by SELinux. Check if SELinux is enabled with getenforce

You need to adjust SELinux to use your port and restart.

I.E.

semanage port -a -t http_port_t -p tcp 9080 2>/dev/null || semanage port -m -t http_port_t -p tcp 9080

I myself wondered how I could change the color of the modal-header.

In my solution to the problem I attempted to follow in the path of how my interpretation of the Bootstrap vision was. I added marker classes to tell what the modal dialog box does.

modal-success, modal-info, modal-warning and modal-error tells what they do and you don't trap your self by suddenly having a color you can't use in every situation if you change some of the modal classes in bootstrap. Of course if you make your own theme you should change them.

.modal-success {
  background-image: -webkit-gradient(linear, 0 0, 0 100%, from(#dff0d8), to(#c8e5bc));
  background-image: -webkit-linear-gradient(#dff0d8 0%, #c8e5bc 100%);
  background-image: -moz-linear-gradient(#dff0d8 0%, #c8e5bc 100%);
  background-image: -o-linear-gradient(#dff0d8 0%, #c8e5bc 100%);
  background-image: linear-gradient(#dff0d8 0%, #c8e5bc 100%);
  background-repeat: repeat-x;
  filter: progid:DXImageTransform.Microsoft.gradient(startColorstr='#ffdff0d8',     endColorstr='#ffc8e5bc', GradientType=0);
  border-color: #b2dba1;
  border-radius: 6px 6px 0 0;
}

In my solution I actually just copied the styling from alert-success in bootstrap and added the border-radius to keep the rounded corners.

A plunk demonstration of my solution to this problem

Another example to illustrate the __declspec keyword:

When you are writing a Windows Kernel Driver, sometimes you want to write your own prolog/epilog code sequences using inline assembler code, so you could declare your function with the naked attribute.

__declspec( naked ) int func( formal_parameters ) {}

Or

#define Naked __declspec( naked )
Naked int func( formal_parameters ) {}

Please refer to naked (C++)

Your solutions don't seem to be working for me, I have the following code. How to put link into the last two divs.

<html xmlns="http://www.w3.org/1999/xhtml" xmlns:v="urn:schemas-microsoft-com:vml" xmlns:o="urn:schemas-microsoft-com:office:office">

<style>
/* Import */
@import url(https://fonts.googleapis.com/css?family=Quicksand:300,400);
* {
  font-family: "Quicksand", sans-serif; 
  font-weight: bold; 
  text-align: center;  
  text-transform: uppercase; 
  -webkit-transition: all 0.25s ease; 
  -moz-transition: all 0.25s ease; 
  -ms-transition: all 0.25s ease; 
  -o-transition: all 0.025s ease; 
}

/* Colors */

#ora {
  background-color: #e67e22; 
}

#red {
  background-color: #e74c3c; 
}

#orab {
  background-color: white; 
  border: 5px solid #e67e22; 
}

#redb {
  background-color: white; 
  border: 5px solid #e74c3c; 
}
/* End of Colors */

.B {
  width: 240px; 
  height: 55px; 
  margin: auto; 
  line-height: 45px; 
  display: inline-block; 
  box-sizing: border-box; 
  -webkit-box-sizing: border-box; 
  -moz-box-sizing: border-box; 
  -ms-box-sizing: border-box; 
  -o-box-sizing: border-box; 
} 

#orab:hover {
  background-color: #e67e22; 
}

#redb:hover {
  background-color: #e74c3c; 
}
#whib:hover {
  background-color: #ecf0f1; 
}

/* End of Border

.invert:hover {
  -webkit-filter: invert(1);
  -moz-filter: invert(1);
  -ms-filter: invert(1);
  -o-filter: invert(1);
}
</style>
<h1>Flat and Modern Buttons</h1>
<h2>Border Stylin'</h2> 

<div class="B bo" id="orab">See the movies list</div></a>
<div class="B bo" id="redb">Avail a free rental day</div>

</html>

validator package:

There seems to be a nice package by Yonatan Matalon called UrlUtil. Quoting its API:

isValidWebPageAddress(java.lang.String address, boolean validateSyntax, 
                      boolean validateExistance) 
Checks if the given address is a valid web page address.

Sun's approach - check the network address

Sun's Java site offers connect attempt as a solution for validating URLs.

Other regex code snippets:

There are regex validation attempts at Oracle's site and weberdev.com.

In SQL Server 2012, 2014:

USE mydb
GO

ALTER ROLE db_datareader ADD MEMBER MYUSER
GO
ALTER ROLE db_datawriter ADD MEMBER MYUSER
GO

In SQL Server 2008:

use mydb
go

exec sp_addrolemember db_datareader, MYUSER 
go
exec sp_addrolemember db_datawriter, MYUSER 
go

To also assign the ability to execute all Stored Procedures for a Database:

GRANT EXECUTE TO MYUSER;

To assign the ability to execute specific stored procedures:

GRANT EXECUTE ON dbo.sp_mystoredprocedure TO MYUSER;

One method is to do it without JavaScript and this is something like this:

    <textarea style="overflow: visible" />

I am installing pyfuzzybut is is not in PyPI; it returns the message: No matching distribution found for pyfuzzy.

I tried the accepted answer

pip install  --no-index --find-links=file:///Users/victor/Downloads/pyfuzzy-0.1.0 pyfuzzy

But it does not work either and returns the following error:

Ignoring indexes: https://pypi.python.org/simple Collecting pyfuzzy Could not find a version that satisfies the requirement pyfuzzy (from versions: ) No matching distribution found for pyfuzzy

At last , I have found a simple good way there: https://pip.pypa.io/en/latest/reference/pip_install.html

Install a particular source archive file.
$ pip install ./downloads/SomePackage-1.0.4.tar.gz
$ pip install http://my.package.repo/SomePackage-1.0.4.zip

So the following command worked for me:

pip install ../pyfuzzy-0.1.0.tar.gz.

Hope it can help you.

It can be usefull. Bindings dose not always work.

<select id="product" class="form-control" name="product" required
        ng-model="issue.productId"
        ng-change="getProductVersions()"
        ng-options="p.id as p.shortName for p in products">
</select>

For example. You fill options list source model from rest-service. Selected value was known befor filling list and was set. After executing rest-request with $http list option be done. But selected option is not set. By unknown reasons AngularJS in shadow $digest executing not bind selected as it shuold be. I gotta use JQuery to set selected. It`s important! Angular in shadow add prefix to value of attr "value" for generated by ng-repeat optinos. For int it is "number:".

$scope.issue.productId = productId;
function activate() {
   $http.get('/product/list')
     .then(function (response) {
       $scope.products = response.data;

       if (productId) {
           console.log("" + $("#product option").length);//for clarity                       
           $timeout(function () {
               console.log("" + $("#product option").length);//for clarity
               $('#product').val('number:'+productId);
               //$scope.issue.productId = productId;//not work at all
           }, 200);
       }
   });
}

You can use property dangerouslySetInnerHTML, like this

const Component = React.createClass({_x000D_
  iframe: function () {_x000D_
    return {_x000D_
      __html: this.props.iframe_x000D_
    }_x000D_
  },_x000D_
_x000D_
  render: function() {_x000D_
    return (_x000D_
      <div>_x000D_
        <div dangerouslySetInnerHTML={ this.iframe() } />_x000D_
      </div>_x000D_
    );_x000D_
  }_x000D_
});_x000D_
_x000D_
const iframe = '<iframe src="https://www.example.com/show?data..." width="540" height="450"></iframe>'; _x000D_
_x000D_
ReactDOM.render(_x000D_
  <Component iframe={iframe} />,_x000D_
  document.getElementById('container')_x000D_
);

<script src="https://cdnjs.cloudflare.com/ajax/libs/react/15.1.0/react.min.js"></script>_x000D_
<script src="https://cdnjs.cloudflare.com/ajax/libs/react/15.1.0/react-dom.min.js"></script>_x000D_
<div id="container"></div>

also, you can copy all attributes from the string(based on the question, you get iframe as a string from a server) which contains <iframe> tag and pass it to new <iframe> tag, like that

/**_x000D_
 * getAttrs_x000D_
 * returns all attributes from TAG string_x000D_
 * @return Object_x000D_
 */_x000D_
const getAttrs = (iframeTag) => {_x000D_
  var doc = document.createElement('div');_x000D_
  doc.innerHTML = iframeTag;_x000D_
_x000D_
  const iframe = doc.getElementsByTagName('iframe')[0];_x000D_
  return [].slice_x000D_
    .call(iframe.attributes)_x000D_
    .reduce((attrs, element) => {_x000D_
      attrs[element.name] = element.value;_x000D_
      return attrs;_x000D_
    }, {});_x000D_
}_x000D_
_x000D_
const Component = React.createClass({_x000D_
  render: function() {_x000D_
    return (_x000D_
      <div>_x000D_
        <iframe {...getAttrs(this.props.iframe) } />_x000D_
      </div>_x000D_
    );_x000D_
  }_x000D_
});_x000D_
_x000D_
const iframe = '<iframe src="https://www.example.com/show?data..." width="540" height="450"></iframe>'; _x000D_
_x000D_
ReactDOM.render(_x000D_
  <Component iframe={iframe} />,_x000D_
  document.getElementById('container')_x000D_
);

<script src="https://cdnjs.cloudflare.com/ajax/libs/react/15.1.0/react.min.js"></script>_x000D_
<script src="https://cdnjs.cloudflare.com/ajax/libs/react/15.1.0/react-dom.min.js"></script>_x000D_
<div id="container"><div>

Try something like

SELECT
    CASE var
        WHEN xyz THEN col1
        WHEN zyx THEN col2
        ELSE col7
    END AS col1,
    ...

In other words, use a conditional expression to select the value, then rename the column.

Alternately, you could build up some sort of dynamic SQL hack to share the query tail; I've done this with iBatis before.

Java script plays on browser where java code is server side thing so you can't simply do this.

What you can do is submit the calculated variable from javascript to server by form-submission, or using URL parameter or using AJAX calls and then you can make it available on server

HTML

<input type="hidden" id="hiddenField"/>

make sure this fields lays under <form>

Javascript

document.getElementById("hiddenField").value=yourCalculatedVariable;

on server you would get this as a part of request

There is a list of Sqlite wrappers for .Net at http://www.sqlite.org/cvstrac/wiki?p=SqliteWrappers. From what I've heard http://sqlite.phxsoftware.com/ is quite good. This particular one lets you access Sqlite through ADO.Net just like any other database.

A[A==NDV]=numpy.nan

A==NDV will produce a boolean array that can be used as an index for A

You can call a service from your controller that returns a promise and then use it in your controller. And further use $emit or $broadcast to inform other controllers about it. In my case, I had to make http calls through my service, so I did something like this :

function ParentController($scope, testService) {
    testService.getList()
        .then(function(data) {
            $scope.list = testService.list;
        })
        .finally(function() {
            $scope.$emit('listFetched');
        })


    function ChildController($scope, testService) {
        $scope.$on('listFetched', function(event, data) {
            // use the data accordingly
        })
    }

and my service looks like this

    app.service('testService', ['$http', function($http) {

        this.list = [];

        this.getList = function() {
            return $http.get(someUrl)
                .then(function(response) {
                    if (typeof response.data === 'object') {
                        list = response.data.results;

                        return response.data;
                    } else {
                        // invalid response
                        return $q.reject(response.data);
                    }

                }, function(response) {
                    // something went wrong
                    return $q.reject(response.data);
                });

        }

    }])

Pure datetime solution, does not depend on language or DATEFORMAT, no strings

SELECT
    DATEADD(year, [year]-1900, DATEADD(month, [month]-1, DATEADD(day, [day]-1, 0)))
FROM
    dbo.Table

If you just want to check the type, you can use jQuery's .is() function,

Like in my case I used below,

if($("#id").is("select")) {
 alert('Select'); 
else if($("#id").is("input")) {
 alert("input");
}

As alluded to by Eric, you can use environ with ComputerName argument like so:

MsgBox Environ("USERNAME")

Some additional information that might be helpful for you to know:

1. The arguments are not case sensitive.
2. There is a slightly faster performing string version of the Environ function. To invoke it, use a dollar sign. (Ex: Environ$("username")) This will net you a small performance gain.
3. You can retrieve all System Environment Variables using this function. (Not just username.) A common use is to get the "ComputerName" value to see which computer the user is logging onto from.
4. I don't recommend it for most situations, but it can be occasionally useful to know that you can also access the variables with an index. If you use this syntax the the name of argument and the value are returned. In this way you can enumerate all available variables. Valid values are 1 - 255.

    Sub EnumSEVars()
        Dim strVar As String
        Dim i As Long
        For i = 1 To 255
            strVar = Environ$(i)
            If LenB(strVar) = 0& Then Exit For
            Debug.Print strVar
        Next
    End Sub

You should probably consider using css3 for this though it does include the use of vendor prefixes.

I've knocked up a quick fiddle to demo but the crux is this.

<style>
.3col
{
    -webkit-column-count: 3;
    -webkit-column-gap: 10px;
    -moz-column-count: 3;
    -moz-column-gap: 10px;
    column-count:3;
    column-gap:10px;
}
</style>
<div class="3col">
<p>col1</p>
<p>col2</p>
<p>col3</p>
</div>

After reading the accepted answer's comments, I tried the robocopy command, which worked for me (using the standard command prompt from Windows 7 64 bits SP 1):

robocopy source_dir dest_dir /s /e

pretty sure you just want the plain old replace function. use like this:

myString.replace('username1','');

i suppose if you want to remove the trailing comma do this instead:

myString.replace('username1,','');

edit:

here is your site specific code:

jQuery("#post_like_list-510").text().replace(...) 

try this one ,

n=int(raw_input("Enter length of the list"))
l1=[]
for i in range(n):
    a=raw_input()
    if(a.isdigit()):
        l1.insert(i,float(a)) #statement1
    else:
        l1.insert(i,a)        #statement2

If the element of the list is just a number the statement 1 will get executed and if it is a string then statement 2 will be executed. In the end you will have an list l1 as you needed.

It means that you wrote to some variables on the stack in an illegal way, most likely as the result of a Buffer overflow.

My solution for it:

export default class Modal {
    private static _instance : Modal = new Modal();

    constructor () {
        if (Modal._instance) 
            throw new Error("Use Modal.instance");
        Modal._instance = this;
    }

    static get instance () {
        return Modal._instance;
    }
}

The good way to draw a Drawable on a canvas is not decoding it yourself but leaving it to the system to do so:

Drawable d = getResources().getDrawable(R.drawable.foobar, null);
d.setBounds(left, top, right, bottom);
d.draw(canvas);

This will work with all kinds of drawables, not only bitmaps. And it also means that you can re-use that same drawable again if only the size changes.

Sample text:

Clinton said
Bush used crayons
Reagan forgot

Just omitting a Bush match:

$ perl -ne 'print if /^(Clinton|Reagan)/' textfile
Clinton said
Reagan forgot

Or if you really want to specify:

$ perl -ne 'print if /^(?!Bush)(Clinton|Reagan)/' textfile
Clinton said
Reagan forgot

Matplotlib doesn't work with pixels directly, but rather physical sizes and DPI. If you want to display a figure with a certain pixel size, you need to know the DPI of your monitor. For example this link will detect that for you.

If you have an image of 3841x7195 pixels it is unlikely that you monitor will be that large, so you won't be able to show a figure of that size (matplotlib requires the figure to fit in the screen, if you ask for a size too large it will shrink to the screen size). Let's imagine you want an 800x800 pixel image just for an example. Here's how to show an 800x800 pixel image in my monitor (my_dpi=96):

plt.figure(figsize=(800/my_dpi, 800/my_dpi), dpi=my_dpi)

So you basically just divide the dimensions in inches by your DPI.

If you want to save a figure of a specific size, then it is a different matter. Screen DPIs are not so important anymore (unless you ask for a figure that won't fit in the screen). Using the same example of the 800x800 pixel figure, we can save it in different resolutions using the dpi keyword of savefig. To save it in the same resolution as the screen just use the same dpi:

plt.savefig('my_fig.png', dpi=my_dpi)

To to save it as an 8000x8000 pixel image, use a dpi 10 times larger:

plt.savefig('my_fig.png', dpi=my_dpi * 10)

Note that the setting of the DPI is not supported by all backends. Here, the PNG backend is used, but the pdf and ps backends will implement the size differently. Also, changing the DPI and sizes will also affect things like fontsize. A larger DPI will keep the same relative sizes of fonts and elements, but if you want smaller fonts for a larger figure you need to increase the physical size instead of the DPI.

Getting back to your example, if you want to save a image with 3841 x 7195 pixels, you could do the following:

plt.figure(figsize=(3.841, 7.195), dpi=100)
( your code ...)
plt.savefig('myfig.png', dpi=1000)

Note that I used the figure dpi of 100 to fit in most screens, but saved with dpi=1000 to achieve the required resolution. In my system this produces a png with 3840x7190 pixels -- it seems that the DPI saved is always 0.02 pixels/inch smaller than the selected value, which will have a (small) effect on large image sizes. Some more discussion of this here.

For renaming your index you can use Elasticsearch Snapshot module.

First you have to take snapshot of your index.while restoring it you can rename your index.

    POST /_snapshot/my_backup/snapshot_1/_restore
    {
     "indices": "jal",
     "ignore_unavailable": "true",
     "include_global_state": false,
     "rename_pattern": "jal",
     "rename_replacement": "jal1"
     }

rename_replacement :-New indexname in which you want backup your data.

Firewall might be the cause, just try disabling it In my case it was due to the firewall. I tried all these suggestions in the answers and none of them worked for me. Finally I disabled the firewall It worked for me.

See the answer at: http://omappedia.org/wiki/Android_eMMC_Booting#Modifying_.IMG_Files

First you need to "uncompress" userdata.img with simg2img, then you can mount it via the loop device.

Several answers are here but nobody has posted usefull code.

Here is my code that detects all encodings that Microsoft detects in Framework 4 in the StreamReader class.

Obviously you must call this function immediately after opening the stream before reading anything else from the stream because the BOM are the first bytes in the stream.

This function requires a Stream that can seek (for example a FileStream). If you have a Stream that cannot seek you must write a more complicated code that returns a Byte buffer with the bytes that have already been read but that are not BOM.

/// <summary>
/// UTF8    : EF BB BF
/// UTF16 BE: FE FF
/// UTF16 LE: FF FE
/// UTF32 BE: 00 00 FE FF
/// UTF32 LE: FF FE 00 00
/// </summary>
public static Encoding DetectEncoding(Stream i_Stream)
{
    if (!i_Stream.CanSeek || !i_Stream.CanRead)
        throw new Exception("DetectEncoding() requires a seekable and readable Stream");

    // Try to read 4 bytes. If the stream is shorter, less bytes will be read.
    Byte[] u8_Buf = new Byte[4];
    int s32_Count = i_Stream.Read(u8_Buf, 0, 4);
    if (s32_Count >= 2)
    {
        if (u8_Buf[0] == 0xFE && u8_Buf[1] == 0xFF)
        {
            i_Stream.Position = 2;
            return new UnicodeEncoding(true, true);
        }

        if (u8_Buf[0] == 0xFF && u8_Buf[1] == 0xFE)
        {
            if (s32_Count >= 4 && u8_Buf[2] == 0 && u8_Buf[3] == 0)
            {
                i_Stream.Position = 4;
                return new UTF32Encoding(false, true);
            }
            else
            {
                i_Stream.Position = 2;
                return new UnicodeEncoding(false, true);
            }
        }

        if (s32_Count >= 3 && u8_Buf[0] == 0xEF && u8_Buf[1] == 0xBB && u8_Buf[2] == 0xBF)
        {
            i_Stream.Position = 3;
            return Encoding.UTF8;
        }

        if (s32_Count >= 4 && u8_Buf[0] == 0 && u8_Buf[1] == 0 && u8_Buf[2] == 0xFE && u8_Buf[3] == 0xFF)
        {
            i_Stream.Position = 4;
            return new UTF32Encoding(true, true);
        }
    }

    i_Stream.Position = 0;
    return Encoding.Default;
}

function notEmpty(value){
  return (typeof value !== 'undefined' && value.trim().length);
}

it will also check white spaces (' ') along with following:

• null ,undefined ,NaN ,empty ,string ("") ,0 ,false

There is another error with the forwars=d slash.

if we get this : def get_x(r): return path/'train'/r['fname']
is the same as def get_x(r): return path + 'train' + r['fname']

data-dismiss makes the current modal window force close

data-toggle opens up a new modal with the href content inside it

<a data-dismiss="modal" data-toggle="modal" href="#lost">Click</a>

or

<a data-dismiss="modal" onclick="call the new div here">Click</a>

do let us know if it works.

• You might also want to take a look around the Modal Documentation

import datetime
a = datetime.datetime.today().year

or even (as Lennart suggested)

a = datetime.datetime.now().year

or even

a = datetime.date.today().year

• In some cases, function pointers are required to use functions that are in a shared library (.DLL or .so). This includes performing stuff across languages, where oftentimes a DLL interface is provided.
• Making compilers
• Making scientific calculators, where you have an array or vector or string map of function pointers?
• Trying to modify video memory directly - making your own graphics package
• Making an API!
• Data structures - node link pointers for special trees you are making

There are Lots of reasons for pointers. Having C name mangling especially is important in DLLs if you want to maintain cross-language compatibility.

You could also go into XCode -> Preferences, select the Indentation tab, and turn on Line Wrapping.

That way, you won't have to type anything extra, and it will work for the stuff you already wrote. :-)

One annoying thing though is...

if (you're long on indentation
    && short on windows) {
            then your code will
                end up squished
                     against th
                         e side
                             li
                              k
                              e

                              t
                              h
                              i
                              s
}

Use SpecialCells to delete only the rows that are visible after autofiltering:

ActiveSheet.Range("$A$1:$I$" & lines).SpecialCells _
    (xlCellTypeVisible).EntireRow.Delete

If you have a header row in your range that you don't want to delete, add an offset to the range to exclude it:

ActiveSheet.Range("$A$1:$I$" & lines).Offset(1, 0).SpecialCells _
    (xlCellTypeVisible).EntireRow.Delete

#include <stdio.h>
#include <time.h>

int main ()
{
   time_t seconds;

   seconds = time(NULL);
   printf("Seconds since January 1, 1970 = %ld\n", seconds);

   return(0);
}

And will get similar result:
Seconds since January 1, 1970 = 1476107865

You need to understand CommonJS, which is a pattern to define modules. You shouldn't abuse GLOBAL scope that's always a bad thing to do, instead you can use the 'exports' token, like this:

// circle.js

var PI = 3.14; // PI will not be accessible from outside this module

exports.area = function (r) {
  return PI * r * r;
};

exports.circumference = function (r) {
  return 2 * PI * r;
};

And the client code that will use our module:

// client.js

var circle = require('./circle');
console.log( 'The area of a circle of radius 4 is '
           + circle.area(4));

This code was extracted from node.js documentation API:

http://nodejs.org/docs/v0.3.2/api/modules.html

Also, if you want to use something like Rails or Sinatra, I recommend Express (I couldn't post the URL, shame on Stack Overflow!)

The following kills all the processes created by this user:

kill  -9  -1

If you happen to be an iOS developer:

Check how many simulators that you have downloaded as they take up a lot of space:

Go to: ~/Library/Developer/Xcode/iOS DeviceSupport

Also delete old archived apps:

Go to: ~/Library/Developer/Xcode/Archives

I cleared 100GB doing this.

I figured out what it was! When I cleared the fields using the each() method, it also cleared the hidden field which the php needed to run:

if ($_POST['action'] == 'addRunner') 

I used the :not() on the selection to stop it from clearing the hidden field.

If you don't want to pollute your source code (after all this warning presents only with Microsoft compiler), add _CRT_SECURE_NO_WARNINGS symbol to your project settings via "Project"->"Properties"->"Configuration properties"->"C/C++"->"Preprocessor"->"Preprocessor definitions".

Also you can define it just before you include a header file which generates this warning. You should add something like this

#ifdef _MSC_VER
#define _CRT_SECURE_NO_WARNINGS
#endif

And just a small remark, make sure you understand what this warning stands for, and maybe, if you don't intend to use other compilers than MSVC, consider using safer version of functions i.e. strcpy_s instead of strcpy.

 if($("element_selector").attr('disabled') || $("element_selector").prop('disabled'))
 {

    // code when element is disabled

  }

On Windows, I prefer Ctrl + Alt + Down.

It selects the lines one by one and automatically starts the multi-line editor mode. It is a bit faster this way. If you have a lot of lines to edit then selecting the text and Ctrl + Shift + L is a better choice.

Just 2 things I think make it ALWAYS preferable to use a # Temp Table rather then a CTE are:

1. You can not put a primary key on a CTE so the data being accessed by the CTE will have to traverse each one of the indexes in the CTE's tables rather then just accessing the PK or Index on the temp table.

2. Because you can not add constraints, indexes and primary keys to a CTE they are more prone to bugs creeping in and bad data.

-onedaywhen yesterday

Here is an example where #table constraints can prevent bad data which is not the case in CTE's

DECLARE @BadData TABLE ( 
                       ThisID int
                     , ThatID int );
INSERT INTO @BadData
       ( ThisID
       , ThatID
       ) 
VALUES
       ( 1, 1 ),
       ( 1, 2 ),
       ( 2, 2 ),
       ( 1, 1 );

IF OBJECT_ID('tempdb..#This') IS NOT NULL
    DROP TABLE #This;
CREATE TABLE #This ( 
             ThisID int NOT NULL
           , ThatID int NOT NULL
                        UNIQUE(ThisID, ThatID) );
INSERT INTO #This
SELECT * FROM @BadData;
WITH This_CTE
     AS (SELECT *
           FROM @BadData)
     SELECT *
       FROM This_CTE;

haha, just found an interesting method to access the bottons

$("#dialog").dialog({

      buttons: {
        'Ok': function(e) { $(e.currentTarget).button('disable'); }

      }
 });

It seems you all don't know there is an event object in the arguments...

by the way, it just accesses the button from within the callback, in general cases, it is good to add an id for access

i would suggest the following way:

@PropertySource(ignoreResourceNotFound = true, value = "classpath:otherprops.properties")
@Controller
public class ClassA {
    @Value("${myName}")
    private String name;

    @RequestMapping(value = "/xyz")
    @ResponseBody
    public void getName(){
        System.out.println(name);
    }
}

Here your new properties file name is "otherprops.properties" and the property name is "myName". This is the simplest implementation to access properties file in spring boot version 1.5.8.

Simple use backticks (ES 6 feature)

SOLUTION 1

const Message = 'This is a message';

<Text>
{`
  Hi~
  ${Message}
`}
</Text>

SOLUTION 2 Add "\n" in Text

<Text>
Hi~{"\n"}
This is a message.
</Text>

If you just want to see the current working directory

import os
print(os.getcwd())

If you want to change the current working directory

os.chdir(path)

path is a string containing the required path to be moved. e.g.

path = "C:\\Users\\xyz\\Desktop\\move here"

Another clean option that I have found useful is pandas.DataFrame.mask which will "replace values where the condition is true."

Create the DataFrame:

In [2]: import pandas as pd

In [3]: df = pd.DataFrame({'a': [0, -1, 2], 'b': [-3, 2, 1]})

In [4]: df
Out[4]: 
   a  b
0  0 -3
1 -1  2
2  2  1

Replace negative numbers with 0:

In [5]: df.mask(df < 0, 0)
Out[5]: 
   a  b
0  0  0
1  0  2
2  2  1

Or, replace negative numbers with NaN, which I frequently need:

In [7]: df.mask(df < 0)
Out[7]: 
     a    b
0  0.0  NaN
1  NaN  2.0
2  2.0  1.0

try this:

files = ['file.jpeg','file.tar.gz','file.png','file.foo.bar','file.etc']
pen_ext = ['foo', 'tar', 'bar', 'etc']

for file in files: #1
    if (file.split(".")[-2] in pen_ext): #2
        ext =  file.split(".")[-2]+"."+file.split(".")[-1]#3
    else:
        ext = file.split(".")[-1] #4
    print (ext) #5

1. get all file name inside the list
2. splitting file name and check the penultimate extension, is it in the pen_ext list or not?
3. if yes then join it with the last extension and set it as the file's extension
4. if not then just put the last extension as the file's extension
5. and then check it out

Use Craken (rake centric cron jobs)

Update since Java 8: Java 8 uses a self-balanced tree for collision-handling, improving the worst case from O(n) to O(log n) for lookup. The use of a self-balanced tree was introduced in Java 8 as an improvement over chaining (used until java 7), which uses a linked-list, and has a worst case of O(n) for lookup (as it needs to traverse the list)

To answer the second part of your question, insertion is done by mapping a given element to a given index in the underlying array of the hashmap, however, when a collision occurs, all elements must still be preserved (stored in a secondary data-structure, and not just replaced in the underlying array). This is usually done by making each array-component (slot) be a secondary datastructure (aka bucket), and the element is added to the bucket residing on the given array-index (if the key does not already exist in the bucket, in which case it is replaced).

During lookup, the key is hashed to it's corresponding array-index, and search is performed for an element matching the (exact) key in the given bucket. Because the bucket does not need to handle collisions (compares keys directly), this solves the problem of collisions, but does so at the cost of having to perform insertion and lookup on the secondary datastructure. The key point is that in a hashmap, both the key and the value is stored, and so even if the hash collides, keys are compared directly for equality (in the bucket), and thus can be uniquely identified in the bucket.

Collission-handling brings the worst-case performance of insertion and lookup from O(1) in the case of no collission-handling to O(n) for chaining (a linked-list is used as secondary datastructure) and O(log n) for self-balanced tree.

References:

Java 8 has come with the following improvements/changes of HashMap objects in case of high collisions.

• The alternative String hash function added in Java 7 has been removed.

• Buckets containing a large number of colliding keys will store their entries in a balanced tree instead of a linked list after certain threshold is reached.

Above changes ensure performance of O(log(n)) in worst case scenarios (https://www.nagarro.com/en/blog/post/24/performance-improvement-for-hashmap-in-java-8)

EntityManager.persist() makes an entity persistent whereas EntityManager.flush() actually runs the query on your database.

So, when you call EntityManager.flush(), queries for inserting/updating/deleting associated entities are executed in the database. Any constraint failures (column width, data types, foreign key) will be known at this time.

The concrete behaviour depends on whether flush-mode is AUTO or COMMIT.

You can't remove API functions without breaking the API. If you would, many applications would no longer compile or run at all.

This is the reason that one reference gives:

Reading a line that overflows the array pointed to by s results in undefined behavior. The use of fgets() is recommended.

Chart.JS API has changed since this was posted and older examples did not seem to be working for me. here is an updated fiddle that works on the newer versions

HTML:

<body>
    <canvas id="canvas" height="450" width="600"></canvas>
    <img id="url" />
</body>

JS:

function done(){
  alert("haha");
  var url=myLine.toBase64Image();
  document.getElementById("url").src=url;
}

var options = {
  bezierCurve : false,
  animation: {
    onComplete: done
  }
};

var myLine = new 
   Chart(document.getElementById("canvas").getContext("2d"),
     {
        data:lineChartData,
        type:"line",
        options:options
      }
    );

http://jsfiddle.net/KSgV7/585/

I found a way for this on the net

It demands a little bit of work, because it has to be done table by table. But anyway, I could copy the tables, data and constraints into a MS SQL database.

Here is the link

http://www.codeproject.com/KB/database/migrate-mysql-to-mssql.aspx

Absolutely, yes you can. This link contains details about how you can achieve that: https://api.jquery.com/jquery.noconflict/.

Just for fun, here's a non-regex (more readable/maintainable for simpletons like me) solution:

string myString = "AB12";

if( Char.IsLetter(myString, 0) && 
    Char.IsLetter(myString, 1) && 
    Char.IsNumber(myString, 2) &&
    Char.IsNumber(myString, 3)) {
    // First two are letters, second two are numbers
}
else {
    // Validation failed
}

EDIT

It seems that I've misunderstood the requirements. The code below will ensure that the first two characters and last two characters of a string validate (so long as the length of the string is > 3)

string myString = "AB12";

if(myString.Length > 3) {    
    if( Char.IsLetter(myString, 0) && 
        Char.IsLetter(myString, 1) && 
        Char.IsNumber(myString, (myString.Length - 2)) &&
        Char.IsNumber(myString, (myString.Length - 1))) {
        // First two are letters, second two are numbers
      }
      else {
        // Validation failed
    }
}
else {
   // Validation failed
}

Basic Functionality

• Automatically saved local edit history is available with the Local History extension.
• Manually saved local edit history is available with the Checkpoints extension (this is the IntelliJ equivalent to adding tags to the local history).

Advanced Functionality

• None of the extensions mentioned above support edit history when a file is moved or renamed.
• The extensions above only support edit history. They do not support move/delete history, for example, like IntelliJ does.

Open Request

If you'd like to see this feature added natively, along with all of the advanced functionality, I'd suggest upvoting the open GitHub issue here.

Try something like this:

try {
    $w = New-Object net.WebClient
    $d = $w.downloadString('http://foo')
}
catch [Net.WebException] {
    Write-Host $_.Exception.ToString()
}

The exception is in the $_ variable. You might explore $_ like this:

try {
    $w = New-Object net.WebClient
    $d = $w.downloadString('http://foo')
}
catch [Net.WebException] {
    $_ | fl * -Force
}

I think it will give you all the info you need.

My rule: if there is some data that is not displayed, try to use -force.

Try this:

function explode(){
  alert("Boom!");
}
setTimeout(explode, 2000);

There are ready-made shortcuts (syntactic sugar) to the function wrapper @CMS answered with. (Below assuming that the context you want is this.tip.)

ECMAScript 2015 (all common browsers and smartphones, Node.js 5.0.0+)

For virtually all javascript development (in 2020) you can use fat arrow functions, which are part of the ECMAScript 2015 (Harmony/ES6/ES2015) specification.

An arrow function expression (also known as fat arrow function) has a shorter syntax compared to function expressions and lexically binds the this value [...].

(param1, param2, ...rest) => { statements }

In your case, try this:

if (this.options.destroyOnHide) {
    setTimeout(() => { this.tip.destroy(); }, 1000);
}

ECMAScript 5 (older browsers and smartphones, Node.js) and Prototype.js

If you target browser compatible with ECMA-262, 5th edition (ECMAScript 5) or Node.js, which (in 2020) means all common browsers as well as older browsers, you could use Function.prototype.bind. You can optionally pass any function arguments to create partial functions.

fun.bind(thisArg[, arg1[, arg2[, ...]]])

Again, in your case, try this:

if (this.options.destroyOnHide) {
    setTimeout(this.tip.destroy.bind(this.tip), 1000);
}

The same functionality has also been implemented in Prototype (any other libraries?).

Function.prototype.bind can be implemented like this if you want custom backwards compatibility (but please observe the notes).

jQuery

If you are already using jQuery 1.4+, there's a ready-made function for explicitly setting the this context of a function.

jQuery.proxy(): Takes a function and returns a new one that will always have a particular context.

$.proxy(function, context[, additionalArguments])

In your case, try this:

if (this.options.destroyOnHide) {
    setTimeout($.proxy(this.tip.destroy, this.tip), 1000);
}

Underscore.js, lodash

It's available in Underscore.js, as well as lodash, as _.bind(...)^1,2

bind Bind a function to an object, meaning that whenever the function is called, the value of this will be the object. Optionally, bind arguments to the function to pre-fill them, also known as partial application.

_.bind(function, object, [*arguments])

In your case, try this:

if (this.options.destroyOnHide) {
    setTimeout(_.bind(this.tip.destroy, this.tip), 1000);
}

bind jquery underscore.js ecmascript-5 prototypejs node.js

Look at Float.intBitsToFloat and Double.longBitsToDouble, which sort of explain how bits correspond to floating-point numbers. In particular, the bits of a normal float look something like

 s * 2^exp * 1.ABCDEFGHIJKLMNOPQRSTUVW

where A...W are 23 bits -- 0s and 1s -- representing a fraction in binary -- s is +/- 1, represented by a 0 or a 1 respectively, and exp is a signed 8-bit integer.

I'm a huge fan of Raphael and the development momentum seems to be going strong (version 0.85 was released late last week). Another big plus is that its developer, Dmitry Baranovskiy, is currently working on a Raphael charting plugin, g.raphael, which looks like its shaping up to be pretty slick (there are a few samples of the output from the early versions on Flickr).

However, just to throw another possible contender into the SVG library mix, Google's SVG Web looks very promising indeed (even though I'm not a big fan of Flash, which it uses to render in non-SVG compliant browsers). Probably one to watch, especially with the upcoming SVG Open conference.

Try std::find

vector<int>::iterator it = std::find(v.begin(), v.end(), 123);

if(it==v.end()){

    std::cout<<"Element not found";
}

My column names is as below

colnames(t)
[1] "Class"    "Sex"      "Age"      "Survived" "Freq" 

I want to change column name of Class and Sex

colnames(t)=c("STD","Gender","AGE","SURVIVED","FREQ")

func callForMenuView() {

    if(!isOpen)

    {
        isOpen = true

        let menuVC : MenuViewController = self.storyboard!.instantiateViewController(withIdentifier: "menu") as! MenuViewController
        self.view.addSubview(menuVC.view)
        self.addChildViewController(menuVC)
        menuVC.view.layoutIfNeeded()

        menuVC.view.frame=CGRect(x: 0 - UIScreen.main.bounds.size.width, y: 0, width: UIScreen.main.bounds.size.width-90, height: UIScreen.main.bounds.size.height);

        UIView.animate(withDuration: 0.3, animations: { () -> Void in
            menuVC.view.frame=CGRect(x: 0, y: 0, width: UIScreen.main.bounds.size.width-90, height: UIScreen.main.bounds.size.height);
    }, completion:nil)

    }else if(isOpen)
    {
        isOpen = false
      let viewMenuBack : UIView = view.subviews.last!

        UIView.animate(withDuration: 0.3, animations: { () -> Void in
            var frameMenu : CGRect = viewMenuBack.frame
            frameMenu.origin.x = -1 * UIScreen.main.bounds.size.width
            viewMenuBack.frame = frameMenu
            viewMenuBack.layoutIfNeeded()
            viewMenuBack.backgroundColor = UIColor.clear
        }, completion: { (finished) -> Void in
            viewMenuBack.removeFromSuperview()

        })
    }

var arr = [ 'a', 'b', 'c'];
arr.push('d'); // insert as last item

Just a shot in the dark(since you did not share the compiler initialization code with us): the way you retrieve the compiler causes the issue. Point your JRE to be inside the JDK as unlike jdk, jre does not provide any tools hence, results in NPE.

Consider using cellspacing and cellpadding attributes for table tag or border-spacing css property.

I work for a company with hundreds of developers who obviously need to check Kafka messages on a regular basis. Employees come and go and therefore we want to avoid the setup (dedicated SASL credentials, certificates, ACLs, ...) for each new employee.

Our platform teams operate a deployment of Kowl (https://github.com/cloudhut/kowl) so that everyone can access it without going through the usual setup. We also use it when developing locally using a docker-compose file.

Best current version, without need to deal with numeric search within NSString is to define macros (See original answer: Check iPhone iOS Version)

Those macros do exist in github, see: https://github.com/carlj/CJAMacros/blob/master/CJAMacros/CJAMacros.h

Like this:

#define SYSTEM_VERSION_EQUAL_TO(v)                  ([[[UIDevice currentDevice] systemVersion] compare:v options:NSNumericSearch] == NSOrderedSame)
#define SYSTEM_VERSION_GREATER_THAN(v)              ([[[UIDevice currentDevice] systemVersion] compare:v options:NSNumericSearch] == NSOrderedDescending)
#define SYSTEM_VERSION_GREATER_THAN_OR_EQUAL_TO(v)  ([[[UIDevice currentDevice] systemVersion] compare:v options:NSNumericSearch] != NSOrderedAscending)
#define SYSTEM_VERSION_LESS_THAN(v)                 ([[[UIDevice currentDevice] systemVersion] compare:v options:NSNumericSearch] == NSOrderedAscending)
#define SYSTEM_VERSION_LESS_THAN_OR_EQUAL_TO(v)     ([[[UIDevice currentDevice] systemVersion] compare:v options:NSNumericSearch] != NSOrderedDescending)

and use them like this:

if (SYSTEM_VERSION_LESS_THAN(@"5.0")) {
    // code here
}

if (SYSTEM_VERSION_GREATER_THAN_OR_EQUAL_TO(@"6.0")) {
    // code here
}

Outdated version below

to get OS version:

[[UIDevice currentDevice] systemVersion]

returns string, which can be turned into int/float via

-[NSString floatValue]
-[NSString intValue]

like this

Both values (floatValue, intValue) will be stripped due to its type, 5.0.1 will become 5.0 or 5 (float or int), for comparing precisely, you will have to separate it to array of INTs check accepted answer here: Check iPhone iOS Version

NSString *ver = [[UIDevice currentDevice] systemVersion];
int ver_int = [ver intValue];
float ver_float = [ver floatValue];

and compare like this

NSLog(@"System Version is %@",[[UIDevice currentDevice] systemVersion]);
NSString *ver = [[UIDevice currentDevice] systemVersion];
float ver_float = [ver floatValue];
if (ver_float < 5.0) return false;

For Swift 4.0 syntax

below example is just checking if the device is of iOS11 or greater version.

let systemVersion = UIDevice.current.systemVersion
if systemVersion.cgFloatValue >= 11.0 {
    //"for ios 11"
  }
else{
   //"ios below 11")
  }

I was confused between the two processes. I found this simple explaination about the difference between Emulators and Simulators

1. Simulator:
   Suppose you have written assembly program in a file and corresponding exe file is ready. The simulator is the pc software which reads the instructions from the exe and 'minmics' the operation of the processor.

2. Emulator:
   Emulator is a (PC software + a processor). The Processor can be plugged into the TARGET BOARD when you want to test the developed software in real time to check run time bugs. When not in use it can be unplugged. The Processor will have a parallel or JTAG interface with the PC for downloading the exe file for execution.

Hence, whereas the Simulator is slow in execution, Emulator will be able to give real time verification of the developed code. Generally you will test your developed code on simulator first and then go for checking on emulator.

source : http://www.dsprelated.com/groups/c6x/show/148.php

ARIA does not change functionality, it only changes the presented roles/properties to screen reader users. WebAIM’s WAVE toolbar identifies ARIA roles on the page.

Check that your singing identity IN YOUR TARGET properties is correct. This one over-rides what you have in your project properties.

Also: I dunno if this is true - but I wasn't getting emails detailing my binary rejections when I did the "ready for binary upload" from a PC - but I DID get an email when I did this on the MAC

To show more than one inputs inline without using "form-inline" class you can use the next code:

<div class="input-group">
    <input type="text" class="form-control" value="First input" />
    <span class="input-group-btn"></span>
    <input type="text" class="form-control" value="Second input" />
</div>

Then using CSS selectors:

/* To remove space between text inputs */
.input-group > .input-group-btn:empty {
    width: 0px;
}

Basically you have to insert an empty span tag with "input-group-btn" class between input tags.

If you want to see more examples of input groups and bootstrap-select groups take a look at this URL: http://jsfiddle.net/vkhusnulina/gze0Lcm0

Came across the same problem and googled out this post. None of the above worked for me. At last I converted my Unicode .xls to .xml (choose Save as ... XML Spreadsheet 2003) and it produced the correct character. Then I wrote code to parse the xml and extracted content for my use.

if you use android:scaleType="fitXY" then you must specify

android:layout_width="75dp" and android:layout_height="75dp"

if use wrap_content it will not stretch to what you need

<ImageView
android:layout_width="75dp"
android:layout_height="75dp"
android:id="@+id/listItemNoteImage"
android:src="@drawable/MyImage"
android:layout_alignParentTop="true"
android:layout_alignParentStart="true"
android:layout_marginStart="12dp"
android:scaleType="fitXY"/>

What about using the .click() function and the tag?

(Compressed version)

<a id="downloadtag" href="examplefolder/testfile.txt" hidden download></a>_x000D_
_x000D_
<button onclick="document.getElementById('downloadtag').click()">Download</button>

Now you can trigger it with js. It also doesn't open, as other examples, image and text files!

(js-function version)

function download(){_x000D_
document.getElementById('downloadtag').click();_x000D_
}

<!-- HTML -->_x000D_
<button onclick="download()">Download</button>_x000D_
<a id="downloadtag" href="coolimages/awsome.png" hidden download></a>

You can use font face like this:

@font-face {
  font-family:"Name-Of-Font";
  src: url("yourfont.ttf") format("truetype");
}

IE 8 doesn't have indexOf function, so I used jQuery inArray instead.

$('input').datepicker({
    beforeShowDay: function(date){
        var string = jQuery.datepicker.formatDate('yy-mm-dd', date);
        return [$.inArray(string, array) == -1];
    }
});

I believe the right answer is "it depends".

As others have pointed out, if the web application that is processing your request is naively receiving and echoing back the received payload or URL parameters (for GET requests) then it might be subject to code injection.

However, if the web application sanitizes and/or filters payload/parameters, it shouldn't be a problem.

It also depends on the user agent (e.g. browser), a customized user agent might inject code without user notice if it detects any in the request (don't know of any public one, but that is also possible).

Divisors do something spectacular: they divide completely. If you want to check the number of divisors for a number, n, it clearly is redundant to span the whole spectrum, 1...n. I have not done any in-depth research for this but I solved Project Euler's problem 12 on Triangular Numbers. My solution for the greater then 500 divisors test ran for 309504 microseconds (~0.3s). I wrote this divisor function for the solution.

int divisors (int x) {
    int limit = x;
    int numberOfDivisors = 1;

    for (int i(0); i < limit; ++i) {
        if (x % i == 0) {
            limit = x / i;
            numberOfDivisors++;
        }
    }

    return numberOfDivisors * 2;
}

To every algorithm, there is a weak point. I thought this was weak against prime numbers. But since triangular numbers are not print, it served its purpose flawlessly. From my profiling, I think it did pretty well.

Happy Holidays.

I disagree with the accepted answer here by Óscar López. That answer is inaccurate!

It is NOT @JoinColumn which indicates that this entity is the owner of the relationship. Instead, it is the @ManyToOne annotation which does this (in his example).

The relationship annotations such as @ManyToOne, @OneToMany and @ManyToMany tell JPA/Hibernate to create a mapping. By default, this is done through a seperate Join Table.

@JoinColumn

The purpose of @JoinColumn is to create a join column if one does not already exist. If it does, then this annotation can be used to name the join column.

MappedBy

The purpose of the MappedBy parameter is to instruct JPA: Do NOT create another join table as the relationship is already being mapped by the opposite entity of this relationship.

Remember: MappedBy is a property of the relationship annotations whose purpose is to generate a mechanism to relate two entities which by default they do by creating a join table. MappedBy halts that process in one direction.

The entity not using MappedBy is said to be the owner of the relationship because the mechanics of the mapping are dictated within its class through the use of one of the three mapping annotations against the foreign key field. This not only specifies the nature of the mapping but also instructs the creation of a join table. Furthermore, the option to suppress the join table also exists by applying @JoinColumn annotation over the foreign key which keeps it inside the table of the owner entity instead.

So in summary: @JoinColumn either creates a new join column or renames an existing one; whilst the MappedBy parameter works collaboratively with the relationship annotations of the other (child) class in order to create a mapping either through a join table or by creating a foreign key column in the associated table of the owner entity.

To illustrate how MapppedBy works, consider the code below. If MappedBy parameter were to be deleted, then Hibernate would actually create TWO join tables! Why? Because there is a symmetry in many-to-many relationships and Hibernate has no rationale for selecting one direction over the other.

We therefore use MappedBy to tell Hibernate, we have chosen the other entity to dictate the mapping of the relationship between the two entities.

@Entity
public class Driver {
    @ManyToMany(mappedBy = "drivers")
    private List<Cars> cars;
}

@Entity
public class Cars {
    @ManyToMany
    private List<Drivers> drivers;
}

Adding @JoinColumn(name = "driverID") in the owner class (see below), will prevent the creation of a join table and instead, create a driverID foreign key column in the Cars table to construct a mapping:

@Entity
public class Driver {
    @ManyToMany(mappedBy = "drivers")
    private List<Cars> cars;
}

@Entity
public class Cars {
    @ManyToMany
    @JoinColumn(name = "driverID")
    private List<Drivers> drivers;
}

git show <revhash>

Documentation here. Or if that doesn't work, try Google Code's GIT Documentation

But the thing is that the .chapter class is not dynamic you're declaring a height:1200px

so it's better to use background:cover and set with media queries specific height's for popular resolutions.

The current index is the value of $key. And for the other question, you can also use:

current($arr)

to get the first element of any array, assuming that you aren't using the next(), prev() or other functions to change the internal pointer of the array.

Look in this libraryes for php http://phptrends.com/category/70. Or use native from php http://www.php.net/manual/en/book.sockets.php .

Use regular expression no need to convert it to char array

if(Regex.IsMatch("yourString",".*?[a-zA-Z].*?"))
{
errorCounter++;
}

You can use Guid.Empty. It is a read-only instance of the Guid structure with the value of 00000000-0000-0000-0000-000000000000

you can also use these instead

var g = new Guid();
var g = default(Guid);

beware not to use Guid.NewGuid() because it will generate a new Guid.

use one of the options above which you and your team think it is more readable and stick to it. Do not mix different options across the code. I think the Guid.Empty is the best one since new Guid() might make us think it is generating a new guid and some may not know what is the value of default(Guid).

Run this command in your project folder. Use serve instead of build

node --max_old_space_size=8000 node_modules/@angular/cli/bin/ng serve  --prod --port=4202

Yes, you can script using the reg command. Example:

reg add HKCU\Software\SomeProduct
reg add HKCU\Software\SomeProduct /v Version /t REG_SZ /d v2.4.6

This would create key HKEY_CURRENT_USER\Software\SomeProduct, and add a String value "v2.4.6" named "Version" to that key.

reg /? has the details.

svn log -r {2009-09-17}:HEAD

where 2009-09-17 is the date you went on holiday. To see the changed files as well as the summary, add a -v option:

svn log -r {2009-09-17}:HEAD -v

I haven't used WebSVN but there will be a log viewer somewhere that does the equivalent of these commands under the hood.

For me it Worked after following the below steps

Step-1 Go to Devices and Simulator

Step-2 Deselect Show as run destination and Connect via network Options

Wait for Few seconds to Load the Xcode, If you want you can restart Xcode also.

Step-3 Follow the same steps and got to Devices and Simulators

Tick back both the options and it will be normal to install your app back.

function stylizeHighlightedString() {

    var text = window.getSelection();

    // For diagnostics
    var start = text.anchorOffset;
    var end = text.focusOffset - text.anchorOffset;

    range = window.getSelection().getRangeAt(0);

    var selectionContents = range.extractContents();
    var span = document.createElement("span");

    span.appendChild(selectionContents);

    span.style.backgroundColor = "yellow";
    span.style.color = "black";

    range.insertNode(span);
}

try this

function demoShow() {   
document.getElementById("but1").style.display="none";

}



<input type="button" value="click me" onclick="demoShow()" id="but" />

<input type="button" value="hide" id="but1" />

For people who are still getting error despite of passing absolute path, should check that if file has a valid name. For me I was trying to create a file with '/' in the file name. As soon as I removed '/', I was able to create the file.

JavaScript:

<script type="text/javascript">
    $(function() { 
        var url = window.location;
        $('ul.nav a').filter(function() {
            return this.href == url;
        }).parent().parent().parent().addClass('active');
    });   
</script>

CSS:

.active{
    color: #fff;
    background-color: #080808;
}

HTML:

<ul class="nav navbar-nav">
                        <li class="dropdown">
                            <a href="#" class="dropdown-toggle" data-toggle="dropdown" role="button" aria-expanded="true"><i class="glyphicon glyphicon-user icon-white"></i> MY ACCOUNT <span class="caret"></span></a>
                            <ul class="dropdown-menu" role="menu">
                                <li>
                                    <?php echo anchor('myaccount', 'HOME', 'title="HOME"'); ?>
                                </li>
                                <li>
                                    <?php echo anchor('myaccount/credithistory', 'CREDIT HISTORY', 'title="CREDIT HISTORY"'); ?>
                                </li>
                          </ul>
                     </li>
</ul>

Another approach!

string str = "12345";
bool containsOnlyDigits = true;
try { if(Convert.ToInt32(str) < 0){ containsOnlyDigits = false; } }
catch { containsOnlyDigits = false; }

Here, if the statement Convert.ToInt32(str) fails, then string does not contain digits only. Another possibility is that if the string has "-12345" which gets converted to -12345 successfully, then there is a check for verifying that the number converted is not less than zero.

How about the H2 console application?

I had this same problem, while I was trying to change prepend icon fill color on input focus, my code looked something like this:

<template #append>
    <b-input-group-text><strong class="text-danger">!</strong></b-input-group-text>
</template>
<b-form-input id="password_confirmation" v-model="form.password_confirmation" type="password" placeholder="Repeat password" autocomplete="new-password" />

The problem was that I'm using a vue-bootstrap slot to inject the prepend, so even if i change the location still get rendered after the input

Well my solution was to swipe their location, and add custom prepend and used ~ symbol, as css doesn't support previous sibling.

<div class="form-input-prepend">
    <svg-vue icon="common.lock" />
</div>
<b-form-input id="password_confirmation" v-model="form.password_confirmation" type="password" placeholder="Repeat password" autocomplete="new-password" />

Scss style

.form-control:focus ~ .form-input-prepend {
    svg path {
        fill: $accent;
    }
}

So just try to change its position, and if necessary use css order or position: absolute; to achieve what you want, and to avoid using javascript for this kind of needs.

"Necessity is the mother of invention." The most of important difference that I would like to point out is the outcome of my own experience of coding. Sometimes you need to pass objects to functions. In that case, if your object is of a very big class then passing it as an object will copy its state (which you might not want ..AND CAN BE BIG OVERHEAD) thus resulting in an overhead of copying object .while pointer is fixed 4-byte size (assuming 32 bit). Other reasons are already mentioned above...

Try this something like this:

var p_ids = document.forms[0].elements["p_id[]"];
alert(p_ids.length);
for (var i = 0, len = p_ids.length; i < len; i++) {
  alert(p_ids[i].value);
}

#include <stdio.h>

int main() {

  printf("gcc version: %d.%d.%d\n",__GNUC__,__GNUC_MINOR__,__GNUC_PATCHLEVEL__);
  return 0;
}

The popular GetLeftPart solution is not supported in the PCL version of Uri, unfortunately. GetComponents is, however, so if you need portability, this should do the trick:

uri.GetComponents(
    UriComponents.SchemeAndServer | UriComponents.UserInfo, UriFormat.Unescaped);

It's simple to convert the Unix timestamp into the desired format. Lets suppose _ts is the Unix timestamp in long

let date = NSDate(timeIntervalSince1970: _ts)

let dayTimePeriodFormatter = NSDateFormatter()
dayTimePeriodFormatter.dateFormat = "MMM dd YYYY hh:mm a"

 let dateString = dayTimePeriodFormatter.stringFromDate(date)

  print( " _ts value is \(_ts)")
  print( " _ts value is \(dateString)")

list1a=list[:5]
list1b=list[5:]

int g[] = {9,8};

This declares an object of type int[2], and initializes its elements to {9,8}

int (*j) = g;

This declares an object of type int *, and initializes it with a pointer to the first element of g.

The fact that the second declaration initializes j with something other than g is pretty strange. C and C++ just have these weird rules about arrays, and this is one of them. Here the expression g is implicitly converted from an lvalue referring to the object g into an rvalue of type int* that points at the first element of g.

This conversion happens in several places. In fact it occurs when you do g[0]. The array index operator doesn't actually work on arrays, only on pointers. So the statement int x = j[0]; works because g[0] happens to do that same implicit conversion that was done when j was initialized.

A pointer to an array is declared like this

int (*k)[2];

and you're exactly right about how this would be used

int x = (*k)[0];

(note how "declaration follows use", i.e. the syntax for declaring a variable of a type mimics the syntax for using a variable of that type.)

However one doesn't typically use a pointer to an array. The whole purpose of the special rules around arrays is so that you can use a pointer to an array element as though it were an array. So idiomatic C generally doesn't care that arrays and pointers aren't the same thing, and the rules prevent you from doing much of anything useful directly with arrays. (for example you can't copy an array like: int g[2] = {1,2}; int h[2]; h = g;)

Examples:

void foo(int c[10]); // looks like we're taking an array by value.
// Wrong, the parameter type is 'adjusted' to be int*

int bar[3] = {1,2};
foo(bar); // compile error due to wrong types (int[3] vs. int[10])?
// No, compiles fine but you'll probably get undefined behavior at runtime

// if you want type checking, you can pass arrays by reference (or just use std::array):
void foo2(int (&c)[10]); // paramater type isn't 'adjusted'
foo2(bar); // compiler error, cannot convert int[3] to int (&)[10]

int baz()[10]; // returning an array by value?
// No, return types are prohibited from being an array.

int g[2] = {1,2};
int h[2] = g; // initializing the array? No, initializing an array requires {} syntax
h = g; // copying an array? No, assigning to arrays is prohibited

Because arrays are so inconsistent with the other types in C and C++ you should just avoid them. C++ has std::array that is much more consistent and you should use it when you need statically sized arrays. If you need dynamically sized arrays your first option is std::vector.

Yes, there is a difference;

• throw ex resets the stack trace (so your errors would appear to originate from HandleException)

• throw doesn't - the original offender would be preserved.

  static void Main(string[] args)
  {
      try
      {
          Method2();
      }
      catch (Exception ex)
      {
          Console.Write(ex.StackTrace.ToString());
          Console.ReadKey();
      }
  }
  
  private static void Method2()
  {
      try
      {
          Method1();
      }
      catch (Exception ex)
      {
          //throw ex resets the stack trace Coming from Method 1 and propogates it to the caller(Main)
          throw ex;
      }
  }
  
  private static void Method1()
  {
      try
      {
          throw new Exception("Inside Method1");
      }
      catch (Exception)
      {
          throw;
      }
  }
  

if you are using localhost database, try port 3306

From the Mozilla Developer Network:

There is no way to stop or break a forEach() loop other than by throwing an exception. If you need such behavior, the forEach() method is the wrong tool.

Early termination may be accomplished with:

• A simple loop
• A for...of loop
• Array.prototype.every()
• Array.prototype.some()
• Array.prototype.find()
• Array.prototype.findIndex()

The other Array methods: every(), some(), find(), and findIndex() test the array elements with a predicate returning a truthy value to determine if further iteration is required.

Simple as this: <input type="text" name="email" value="e-mail..." onFocus="this.value=''">

In general, vim is a very powerful regular language editor (macros extend this but we'll ignore that for now). This is because vim's a thin layer on top of ed, and ed isn't much more than a line editor that speaks regex. Emacs has the advantage of being built on top of ELisp; lending it the ability to easily parse complex grammars and perform indentation tricks like the one you shared above.

To be honest, I've never been able to dive into the depths of emacs because it is simply delightful meditating within my vim cave. With that said, let's jump in.

Getting Started

Janus

For beginners, I highly recommend installing the readymade Janus plugin (fwiw, the name hails from a Star Trek episode featuring Janus Vim). If you want a quick shortcut to a vim IDE it's your best bang for your buck.

I've never used it much, but I've seen others use it happily and my current setup is borrowed heavily from an old Janus build.

Vim Pathogen

Otherwise, do some exploring on your own! I'd highly recommend installing vim pathogen if you want to see the universe of vim plugins.

It's a package manager of sorts. Once you install it, you can git clone packages to your ~/.vim/bundle directory and they're auto-installed. No more plugin installation, maintenance, or uninstall headaches!

You can run the following script from the GitHub page to install pathogen:

mkdir -p ~/.vim/autoload ~/.vim/bundle; \
curl -so ~/.vim/autoload/pathogen.vim \
    https://raw.github.com/tpope/vim-pathogen/HEAD/autoload/pathogen.vim

Helpful Links

Here are some links on extending vim I've found and enjoyed:

• Turning Vim Into A Modern Python IDE
• Vim As Python IDE
• OS X And Python (osx specific)
• Learn Vimscript The Hard Way (great book if you want to learn vimscript)

Parse int

parseInt(canvas.css("margin-left")); 

returns 0 for 0px

An old question but I recently needed to do an AS3>JS port, and for the sake of speed I wrote a simple AS3-style Dictionary object for JS:

http://jsfiddle.net/MickMalone1983/VEpFf/2/

If you didn't know, the AS3 dictionary allows you to use any object as the key, as opposed to just strings. They come in very handy once you've found a use for them.

It's not as fast as a native object would be, but I've not found any significant problems with it in that respect.

API:

//Constructor
var dict = new Dict(overwrite:Boolean);

//If overwrite, allows over-writing of duplicate keys,
//otherwise, will not add duplicate keys to dictionary.

dict.put(key, value);//Add a pair
dict.get(key);//Get value from key
dict.remove(key);//Remove pair by key
dict.clearAll(value);//Remove all pairs with this value
dict.iterate(function(key, value){//Send all pairs as arguments to this function:
    console.log(key+' is key for '+value);
});


dict.get(key);//Get value from key

In my case, the padding was because of the sectionHeader and sectionFooter heights, where storyboard allowed me to change it to minimum 1. So in viewDidLoad method:

tableView.sectionHeaderHeight = 0
tableView.sectionFooterHeight = 0

Do something like this:

if($request->hasFile('video')){

    $video=$request->file('video');
    $filename=str_random(20).".".$video->extension(); 
    $path = Storage::putFileAs(
            '/', $video, $filename
     );
    $data['video']=$filename;
 }

I have made a small batch script that can determine PowerShell version:

@echo off
for /f "tokens=2 delims=:" %%a in ('powershell -Command Get-Host ^| findstr /c:Version') do (echo %%a)

This simply extracts the version of PowerShell using Get-Host and searches the string Version

When the line with the version is found, it uses the for command to extract the version. In this case we are saying that the delimiter is a colon and search next the first colon, resulting in my case 5.1.18362.752.

 $('#some_select_box').click(function() {
     $(this).find('option:selected').remove();
 });

Using the find method.

If you are using Python3.

then you can use Print Function :

your_data = {"Purchase Amount": 'TotalAmount'}
print(your_data,  file=open('D:\log.txt', 'w'))

For python2

this is the example of Python Print String To Text File

def my_func():
    """
    this function return some value
    :return:
    """
    return 25.256


def write_file(data):
    """
    this function write data to file
    :param data:
    :return:
    """
    file_name = r'D:\log.txt'
    with open(file_name, 'w') as x_file:
        x_file.write('{} TotalAmount'.format(data))


def run():
    data = my_func()
    write_file(data)


run()

bash | curl http://your.url.here/script.txt

actual example:

juan@juan-MS-7808:~$ bash | curl https://raw.githubusercontent.com/JPHACKER2k18/markwe/master/testapp.sh


Oh, wow im alive


juan@juan-MS-7808:~$ 

I entirely agree that goto is poor poor coding, but no one has actually answered the question. There is in fact a goto module for Python (though it was released as an April fool joke and is not recommended to be used, it does work).

At the click on the image in System tray, you can verify if the frame is visible and then you have to set Visible = true or false

Complile a Java file to generate a class:

javac filename.java

Execute the generated class:

java filename

I am not expert, but this may work as well,

dat <- dat[2:nrow(dat), ]

Swift 4.1 and Swift 5. The updatetime method will called after every second and seconds will display on UIlabel.

     var timer: Timer?
     var totalTime = 60
    
     private func startOtpTimer() {
            self.totalTime = 60
            self.timer = Timer.scheduledTimer(timeInterval: 1.0, target: self, selector: #selector(updateTimer), userInfo: nil, repeats: true)
        }
    
    @objc func updateTimer() {
            print(self.totalTime)
            self.lblTimer.text = self.timeFormatted(self.totalTime) // will show timer
            if totalTime != 0 {
                totalTime -= 1  // decrease counter timer
            } else {
                if let timer = self.timer { 
                    timer.invalidate()
                    self.timer = nil
                }
            }
        }
    func timeFormatted(_ totalSeconds: Int) -> String {
        let seconds: Int = totalSeconds % 60
        let minutes: Int = (totalSeconds / 60) % 60
        return String(format: "%02d:%02d", minutes, seconds)
    }

I am trying to set a div to a certain percentage height in CSS

Percentage of what?

To set a percentage height, its parent element(*) must have an explicit height. This is fairly self-evident, in that if you leave height as auto, the block will take the height of its content... but if the content itself has a height expressed in terms of percentage of the parent you've made yourself a little Catch 22. The browser gives up and just uses the content height.

So the parent of the div must have an explicit height property. Whilst that height can also be a percentage if you want, that just moves the problem up to the next level.

If you want to make the div height a percentage of the viewport height, every ancestor of the div, including <html> and <body>, have to have height: 100%, so there is a chain of explicit percentage heights down to the div.

(*: or, if the div is positioned, the ‘containing block’, which is the nearest ancestor to also be positioned.)

Alternatively, all modern browsers and IE>=9 support new CSS units relative to viewport height (vh) and viewport width (vw):

div {
    height:100vh; 
}

See here for more info.

This is because you define your "doc" variable outside of your click event. The first time you click the button the doc variable contains a new jsPDF object. But when you click for a second time, this variable can't be used in the same way anymore. As it is already defined and used the previous time.

change it to:

$(function () {

    var specialElementHandlers = {
        '#editor': function (element,renderer) {
            return true;
        }
    };
 $('#cmd').click(function () {
        var doc = new jsPDF();
        doc.fromHTML(
            $('#target').html(), 15, 15, 
            { 'width': 170, 'elementHandlers': specialElementHandlers }, 
            function(){ doc.save('sample-file.pdf'); }
        );

    });  
});

and it will work.

I was facing the same issue in bitbucket, and this worked for me:

line1
##<2 white spaces><enter>
line2

Just pass a callback as argument like this:

function getMeta(url, callback) {_x000D_
    var img = new Image();_x000D_
    img.src = url;_x000D_
    img.onload = function() { callback(this.width, this.height); }_x000D_
}_x000D_
getMeta(_x000D_
  "http://snook.ca/files/mootools_83_snookca.png",_x000D_
  function(width, height) { alert(width + 'px ' + height + 'px') }_x000D_
);

Or with a constructor & linq with Select:

public class TargetType {
  public string Prop1 {get;set;}
  public string Prop1 {get;set;}

  // Constructor
  public TargetType(OrigType origType) {
    Prop1 = origType.Prop1;
    Prop2 = origType.Prop2;
  }
}

var origList = new List<OrigType>();
var targetList = origList.Select(s=> new TargetType(s)).ToList();  

The Linq line is more soft! ;-)

I have had luck using the socket object directly (rather than the TCP client). I create a Server object that looks something like this (I've edited some stuff such as exception handling out for brevity, but I hope that the idea comes across.)...

public class Server()
{
    private Socket sock;
    // You'll probably want to initialize the port and address in the
    // constructor, or via accessors, but to start your server listening
    // on port 8080 and on any IP address available on the machine...
    private int port = 8080;
    private IPAddress addr = IPAddress.Any;

    // This is the method that starts the server listening.
    public void Start()
    {
        // Create the new socket on which we'll be listening.
        this.sock = new Socket(
            addr.AddressFamily,
            SocketType.Stream,
            ProtocolType.Tcp);
        // Bind the socket to the address and port.
        sock.Bind(new IPEndPoint(this.addr, this.port));
        // Start listening.
        this.sock.Listen(this.backlog);
        // Set up the callback to be notified when somebody requests
        // a new connection.
        this.sock.BeginAccept(this.OnConnectRequest, sock);
    }

    // This is the method that is called when the socket recives a request
    // for a new connection.
    private void OnConnectRequest(IAsyncResult result)
    {
        // Get the socket (which should be this listener's socket) from
        // the argument.
        Socket sock = (Socket)result.AsyncState;
        // Create a new client connection, using the primary socket to
        // spawn a new socket.
        Connection newConn = new Connection(sock.EndAccept(result));
        // Tell the listener socket to start listening again.
        sock.BeginAccept(this.OnConnectRequest, sock);
    }
}

Then, I use a separate Connection class to manage the individual connection with the remote host. That looks something like this...

public class Connection()
{
    private Socket sock;
    // Pick whatever encoding works best for you.  Just make sure the remote 
    // host is using the same encoding.
    private Encoding encoding = Encoding.UTF8;

    public Connection(Socket s)
    {
        this.sock = s;
        // Start listening for incoming data.  (If you want a multi-
        // threaded service, you can start this method up in a separate
        // thread.)
        this.BeginReceive();
    }

    // Call this method to set this connection's socket up to receive data.
    private void BeginReceive()
    {
        this.sock.BeginReceive(
                this.dataRcvBuf, 0,
                this.dataRcvBuf.Length,
                SocketFlags.None,
                new AsyncCallback(this.OnBytesReceived),
                this);
    }

    // This is the method that is called whenever the socket receives
    // incoming bytes.
    protected void OnBytesReceived(IAsyncResult result)
    {
        // End the data receiving that the socket has done and get
        // the number of bytes read.
        int nBytesRec = this.sock.EndReceive(result);
        // If no bytes were received, the connection is closed (at
        // least as far as we're concerned).
        if (nBytesRec <= 0)
        {
            this.sock.Close();
            return;
        }
        // Convert the data we have to a string.
        string strReceived = this.encoding.GetString(
            this.dataRcvBuf, 0, nBytesRec);

        // ...Now, do whatever works best with the string data.
        // You could, for example, look at each character in the string
        // one-at-a-time and check for characters like the "end of text"
        // character ('\u0003') from a client indicating that they've finished
        // sending the current message.  It's totally up to you how you want
        // the protocol to work.

        // Whenever you decide the connection should be closed, call 
        // sock.Close() and don't call sock.BeginReceive() again.  But as long 
        // as you want to keep processing incoming data...

        // Set up again to get the next chunk of data.
        this.sock.BeginReceive(
            this.dataRcvBuf, 0,
            this.dataRcvBuf.Length,
            SocketFlags.None,
            new AsyncCallback(this.OnBytesReceived),
            this);

    }
}

You can use your Connection object to send data by calling its Socket directly, like so...

this.sock.Send(this.encoding.GetBytes("Hello to you, remote host."));

As I said, I've tried to edit the code here for posting, so I apologize if there are any errors in it.

This can be installed via conda with the command conda install -c anaconda python=3.7 as per https://anaconda.org/anaconda/python.

Though not all packages support 3.7 yet, running conda update --all may resolve some dependency failures.

git grep

Use git grep which is optimized for performance and aims to search through certain files.

By default it ignores binary files and it is honoring your .gitignore. If you're not working with Git structure, you can still use it by passing --no-index.

Example syntax:

git grep --no-index "some_pattern"

For more examples, see:

• How to exclude certain directories/files from git grep search.
• Check if all of multiple strings or regexes exist in a file

You need to set more fields then just border-width. The style basically puts the border on the page. Width controls the thickness, and color tells it what color to make the border.

border-style: solid; border-width:thin; border-color: #FFFFFF;

select date_format(str_to_date('31/12/2010', '%d/%m/%Y'), '%Y%m'); 

or

select date_format(str_to_date('12/31/2011', '%m/%d/%Y'), '%Y%m'); 

hard to tell from your example

Putting these lines at the starting of the code will tell your operating systems to look up the binary program needed for the execution of the python script i.e it is the python interpreter.

So it depends on your operating system where it keeps the python interpreter. As I have Ubuntu as operating system it keeps the python interpreter in /usr/bin/python so I have to write this line at the starting of my python script;

#!/usr/bin/python

After completing and saving your code

1. Start your command terminal

2. Make sure the script lies in your present working directory

3. Type chmod +x script_name.py

4. Now you can start the script by clicking the script. An alert box will appear; press "Run" or "Run in Terminal" in the alert box; or, at the terminal prompt, type ./script_name.py

Regression test - Is a type of software testing where we try to cover or check around the bug fix. The functionality around the bug fix should not get changed or altered due to the fix provided. Issues found in such process are called as regression issues.

Smoke Testing: Is a kind of testing done to decide whether to accept the build/software for further QA testing.

something is not right

Well, you are using jQuery to check for the presence of jQuery. If jQuery isn't loaded then $() won't even run at all and your callback won't execute, unless you're using another library and that library happens to share the same $() syntax.

Remove your $(document).ready() (use something like window.onload instead):

window.onload = function() {
    if (window.jQuery) {  
        // jQuery is loaded  
        alert("Yeah!");
    } else {
        // jQuery is not loaded
        alert("Doesn't Work");
    }
}

If you want force stop your thread: thread._Thread_stop() For me works very good.

I have the same issue. My url is as below

http://somesite/someapplication

Below doesnot work

<link rel="shortcut icon" type="image/x-icon" href="favicon.ico" />

I got it to work like below

<link rel="shortcut icon" type="image/x-icon" href="/someapplication/favicon.ico" />

By Java class, I am assuming you mean a Servlet class as setting session attribute in arbitrary Java class does not make sense.You can do something like this in your servlet's doGet/doPost methods

public void doGet(HttpServletRequest request, HttpServletResponse response) {

    HttpSession session = request.getSession();
    String username = (String)request.getAttribute("un");
    session.setAttribute("UserName", username);
}

When you are using GET Method the contract must be this.

[WebGet(UriTemplate = "/", BodyStyle = WebMessageBodyStyle.Bare, ResponseFormat = WebMessageFormat.Json)]
List<User> Get();

with this we have a json without the boot parameter

Aldo Flores @alduar http://alduar.blogspot.com

//Create our own namespaces for the output
XmlSerializerNamespaces ns = new XmlSerializerNamespaces();

//Add an empty namespace and empty value
ns.Add("", "");

//Create the serializer
XmlSerializer slz = new XmlSerializer(someType);

//Serialize the object with our own namespaces (notice the overload)
slz.Serialize(myXmlTextWriter, someObject, ns)

Example: Read json from file

/* test.json */
{
   "appDesc": {
      "description": "SomeDescription",
      "message": "SomeMessage"
   },
   "appName": {
      "description": "Home",
      "message": "Welcome",
      "imp":["awesome","best","good"]
   }
}


void readJson()
   {
      QString val;
      QFile file;
      file.setFileName("test.json");
      file.open(QIODevice::ReadOnly | QIODevice::Text);
      val = file.readAll();
      file.close();
      qWarning() << val;
      QJsonDocument d = QJsonDocument::fromJson(val.toUtf8());
      QJsonObject sett2 = d.object();
      QJsonValue value = sett2.value(QString("appName"));
      qWarning() << value;
      QJsonObject item = value.toObject();
      qWarning() << tr("QJsonObject of description: ") << item;

      /* in case of string value get value and convert into string*/
      qWarning() << tr("QJsonObject[appName] of description: ") << item["description"];
      QJsonValue subobj = item["description"];
      qWarning() << subobj.toString();

      /* in case of array get array and convert into string*/
      qWarning() << tr("QJsonObject[appName] of value: ") << item["imp"];
      QJsonArray test = item["imp"].toArray();
      qWarning() << test[1].toString();
   }

OUTPUT

QJsonValue(object, QJsonObject({"description": "Home","imp": ["awesome","best","good"],"message": "YouTube"}) ) 
"QJsonObject of description: " QJsonObject({"description": "Home","imp": ["awesome","best","good"],"message": "YouTube"}) 
"QJsonObject[appName] of description: " QJsonValue(string, "Home") 
"Home" 
"QJsonObject[appName] of value: " QJsonValue(array, QJsonArray(["awesome","best","good"]) ) 
"best" 

Example: Read json from string

Assign json to string as below and use the readJson() function shown before:

val =   
'  {
       "appDesc": {
          "description": "SomeDescription",
          "message": "SomeMessage"
       },
       "appName": {
          "description": "Home",
          "message": "Welcome",
          "imp":["awesome","best","good"]
       }
    }';

OUTPUT

QJsonValue(object, QJsonObject({"description": "Home","imp": ["awesome","best","good"],"message": "YouTube"}) ) 
"QJsonObject of description: " QJsonObject({"description": "Home","imp": ["awesome","best","good"],"message": "YouTube"}) 
"QJsonObject[appName] of description: " QJsonValue(string, "Home") 
"Home" 
"QJsonObject[appName] of value: " QJsonValue(array, QJsonArray(["awesome","best","good"]) ) 
"best" 

If your url is http://localhost:8080/context path?msisdn={msisdn}&email={email}

then

Map<String,Object> queryParams=new HashMap<>();
queryParams.put("msisdn",your value)
queryParams.put("email",your value)

works for resttemplate exchange method as described by you

Just access the Priority property of the object returned from the pipeline:

$var = (Get-WSManInstance -enumerate wmicimv2/win32_process).Priority

(This won't work if Get-WSManInstance returns multiple objects.²)

For the second question: to get two properties there are several options, problably the simplest is to have have one variable* containing an object with two separate properties:

$var = (Get-WSManInstance -enumerate wmicimv2/win32_process | select -first 1 Priority, ProcessID)

and then use, assuming only one process:

$var.Priority

and

$var.ProcessID

If there are multiple processes $var will be an array which you can index, so to get the properties of the first process (using the array literal syntax @(...) so it is always a collection¹):

$var = @(Get-WSManInstance -enumerate wmicimv2/win32_process | select -first 1 Priority, ProcessID)

and then use:

$var[0].Priority
$var[0].ProcessID

¹ PowerShell helpfully for the command line, but not so helpfully in scripts has some extra logic when assigning the result of a pipeline to a variable: if no objects are returned then set $null, if one is returned then that object is assigned, otherwise an array is assigned. Forcing an array returns an array with zero, one or more (respectively) elements.

² This changes in PowerShell V3 (at the time of writing in Release Candidate), using a member property on an array of objects will return an array of the value of those properties.

Make sure "Start In" does NOT end with a BACKSLASH.

You can try using JavaScript's Date Object

new Date(year,month).getFullYear()%4==0

This will return true or false.

In the bash shell, surround arithmetic expressions with $(( ... ))

$ echo $(( 7 / 3 ))
2

Although I think you are limited to integers.

Yet another method - create a filter function that returns True for all desired tags:

def my_filter(tag):
    return (tag.name == 'a' and
        tag.parent.name == 'li' and
        'test' in tag.parent['class'])

Then just call find_all with the argument:

for a in soup(my_filter): # or soup.find_all(my_filter)
    print a

I stole the logging code from virtualenv for a project of mine. Look in main() of virtualenv.py to see how it's initialized. The code is sprinkled with logger.notify(), logger.info(), logger.warn(), and the like. Which methods actually emit output is determined by whether virtualenv was invoked with -v, -vv, -vvv, or -q.

An easy way to do this with some jQuery and straight JavaScript, just view your console in Chrome or Firefox to see the output...

  var queries = {};
  $.each(document.location.search.substr(1).split('&'),function(c,q){
    var i = q.split('=');
    queries[i[0].toString()] = i[1].toString();
  });
  console.log(queries);

For completeness, the boost way would be to use boost::format

cout << boost::format("%s %s > %s") % a % b % c;

Take your pick. The boost solution has the advantage of type safety with the sprintf format (for those who find the << syntax a bit clunky).

For completely transparent color, use:

rbga(255,255,255,0)

A little more visible:

rbga(255,255,255,.3)

   .controller('pieChartController', ['$scope', '$http', '$httpParamSerializerJQLike', function($scope, $http, $httpParamSerializerJQLike) {
        var data = {
                TimeStamp : "2016-04-25 12:50:00"
        };
        $http({
            method: 'POST',
            url: 'serverutilizationreport',
            headers: {'Content-Type': 'application/x-www-form-urlencoded'},
            data: $httpParamSerializerJQLike(data),
        }).success(function () {});
    }
  ]);

Solution:

1. Start emulator (separately) and wait until it is fully loaded.
2. Open keylock.
3. Navigate to Eclipse and run your app.

Cause of the problem: Android emulator hasn't loaded all its libraries which handle the installing of a new application and due to that you run into java.io.IOException: EOF

That was causing me the problem.

I moved my project from "standard" hosting to Azure and get the same error when I try to open page with url-rewrite. I.e. rule is :

<add key="/iPod-eBook-Creator.html" value="/Product/ProductDetail?PRODUCT_UID=IPOD_EBOOK_CREATOR" />

try to open my_site/iPod-eBook-Creator.html and get this error (page my_site/Product/ProductDetail?PRODUCT_UID=IPOD_EBOOK_CREATOR can be opened without any problem).

I checked the fully site - never used .. to "level up"

It is important to understand that the transaction buffer is limited to 1 MB, regardless of device capabilities or app. This buffer is used with every API calls you make and is shared amongst all transactions an app is currently running.

I believe it also holds some specific object like parcels and such (Parcel.obtain()), so it's important to always match every obtain() with a recycle().

This error can easily happen on API calls returning a lot of data, even though the returned data is less than 1 MB (if other transactions are still running).

For example, the PackageManager.getInstalledApplication() call returns a list of all apps installed. Adding specific flags allows to retrieve a lot of extra data. Doing so is likely to fail, so it's recommended not to retrieve any extra data and retrieve those on a per-app basis.

However the call may still fail, so it's important to surround it with a catch and be able to retry if necessary.

As far as I know, there's no work-around to such issue except retrying and making sure to retrieve as little information as possible.

Your query should look like

UPDATE table_name
SET column1=value, column2=value2,...
WHERE some_column=some_value

You can check the below question for help

• SQL update query using joins?

Use 3 backslashes to escape spaces in names of directories:

scp user@host:/path/to/directory\\\ with\\\ spaces/file ~/Downloads

should copy to your Downloads directory the file from the remote directory called directory with spaces.

window.getSelection - vs - document.selection

This one works for me:

function getCaretCharOffset(element) {_x000D_
  var caretOffset = 0;_x000D_
_x000D_
  if (window.getSelection) {_x000D_
    var range = window.getSelection().getRangeAt(0);_x000D_
    var preCaretRange = range.cloneRange();_x000D_
    preCaretRange.selectNodeContents(element);_x000D_
    preCaretRange.setEnd(range.endContainer, range.endOffset);_x000D_
    caretOffset = preCaretRange.toString().length;_x000D_
  } _x000D_
_x000D_
  else if (document.selection && document.selection.type != "Control") {_x000D_
    var textRange = document.selection.createRange();_x000D_
    var preCaretTextRange = document.body.createTextRange();_x000D_
    preCaretTextRange.moveToElementText(element);_x000D_
    preCaretTextRange.setEndPoint("EndToEnd", textRange);_x000D_
    caretOffset = preCaretTextRange.text.length;_x000D_
  }_x000D_
_x000D_
  return caretOffset;_x000D_
}_x000D_
_x000D_
_x000D_
// Demo:_x000D_
var elm = document.querySelector('[contenteditable]');_x000D_
elm.addEventListener('click', printCaretPosition)_x000D_
elm.addEventListener('keydown', printCaretPosition)_x000D_
_x000D_
function printCaretPosition(){_x000D_
  console.log( getCaretCharOffset(elm), 'length:', this.textContent.trim().length )_x000D_
}

<div contenteditable>some text here <i>italic text here</i> some other text here <b>bold text here</b> end of text</div>

The calling line depends on event type, for key event use this:

getCaretCharOffsetInDiv(e.target) + ($(window.getSelection().getRangeAt(0).startContainer.parentNode).index());

for mouse event use this:

getCaretCharOffsetInDiv(e.target.parentElement) + ($(e.target).index())

on these two cases I take care for break lines by adding the target index

The best solution is not to use the same element for column and panel:

<div class="row">
    <div class="col-md-3">
        <div class="panel" id="gameplay-away-team">Away Team</div>
    </div>
    <div class="col-md-6">
        <div class="panel" id="gameplay-baseball-field">Baseball Field</div>
    </div>
    <div class="col-md-3">
        <div class="panel" id="gameplay-home-team">Home Team</div>
    </div>
</div>

and some more styles:

#gameplay-baseball-field {
  padding-right: 10px;
  padding-left: 10px;
}

To me, this is the biggest mistake in Sublime. Alt+F3 is hard to reach/remember, and Ctrl+Shift+G makes no sense considering Ctrl+D is "add next instance to selection".

Add this to your User Key Bindings (Preferences > Key Bindings):

{ "keys": ["ctrl+shift+d"], "command": "find_all_under" },

Now you can highlight something, press Ctrl+Shift+D, and it will add every other instance in the file to the selection.

@(new HtmlString(myString))

use this and it's gonna work:

 $('select[name=selValue]').selectpicker('val', 1);

Now I'm using this:

Dialoglar.Confirm = function (_title, _question, callback_OK) {
    var confirmArguments = arguments;
    bootbox.dialog({
        title: "<b>" + _title + "</b>",
        message: _question,
        buttons: {
            success: {
                label: "OK",
                className: "btn-success",
                callback: function () {
                    if (typeof(callback_OK) == "function") {                            callback_OK.apply(this,Array.prototype.slice.call(confirmArguments, 3));
                    }
                }
            },
            danger: {
                label: "Cancel",
                className: "btn-danger",
                callback: function () {
                    $(this).hide();
                }
            }
        }
    });
};

Here's a nice jQuery Tooltip:

https://jqueryui.com/tooltip/

To implement this, just follow these steps:

1. Add this code in your <head></head> tags:

   <script type="text/javascript" src="http://cdn.jquerytools.org/1.2.5/full/jquery.tools.min.js"></script>    
   <script type="text/javascript">
   $("[title]").tooltip();
   </script> 
   <style type="text/css"> 
   
   /* tooltip styling. by default the element to be styled is .tooltip  */
   .tooltip {
       display:none;
       background:transparent url(https://dl.dropboxusercontent.com/u/25819920/tooltip/black_arrow.png);
       font-size:12px;
       height:70px;
       width:160px;
       padding:25px;
       color:#fff;
   }
   </style> 
   

2. On the HTML elements that you want to have the tooltip, just add a title attribute to it. Whatever text is in the title attribute will be in the tooltip.

Note: When JavaScript is disabled, it will fallback to the default browser/operating system tooltip.

You can not post to Facebook walls automatically without creating an application and using the templated feed publisher as Frank pointed out.

The only thing you can do is use the 'share' widgets that they provide, which require user interaction.

First Run;

CREATE PROCEDURE sp_First @columnname NVARCHAR(128)--128 = SQL Server Maximum Column Name Length
AS
BEGIN

    DECLARE @query NVARCHAR(MAX)

    SET @query = 'SELECT ' + @columnname + ' FROM Table_1'

    EXEC(@query)

END

Second Run;

EXEC sp_First 'COLUMN_Name'

Of course, the accepted answer of Arrays.equal( byte[] first, byte[] second ) is correct. I like to work at a lower level, but I was unable to find a low level efficient function to perform equality test ranges. I had to whip up my own, if anyone needs it:

public static boolean ArraysAreEquals(
 byte[] first,
 int firstOffset,
 int firstLength,
 byte[] second,
 int secondOffset,
 int secondLength
) {
    if( firstLength != secondLength ) {
        return false;
    }

    for( int index = 0; index < firstLength; ++index ) {
        if( first[firstOffset+index] != second[secondOffset+index]) {
            return false;
        }
    }

    return true;
}

Your port 80 is being used by the system.

1. In Windows “World Wide Publishing" Service is using this port and it's process is system which PID is 4 maximum time and stopping this service(“World Wide Publishing") will free the port 80 and you can connect Apache using this port. To stop the service go to the “Task manager –> Services tab”, right click the “World Wide Publishing Service” and stop.
2. If you don't find there then Then go to "Run > services.msc" and again find there and right click the “World Wide Publishing Service” and stop.
3. If you didn't find “World Wide Publishing Service” there then go to "Run>>resmon.exe>> Network Tab>>Listening Ports" and see which process is using port 80

And from "Overview>>CPU" just Right click on that process and click "End Process Tree". If that process is system that might be a critical issue.

The svnbook has a section on how Subversion allows you to revert the changes from a particular revision without affecting the changes that occured in subsequent revisions:

http://svnbook.red-bean.com/en/1.4/svn.branchmerge.commonuses.html#svn.branchmerge.commonuses.undo

I don't use Eclipse much, but in TortoiseSVN you can do this from the from the log dialogue; simply right-click on the revision you want to revert and select "Revert changes from this revision".

In the case that the files for which you want to revert "bad changes" had "good changes" in subsequent revisions, then the process is the same. The changes from the "bad" revision will be reverted leaving the changes from "good" revisions untouched, however you might get conflicts.

Um, anybody heard of Zend Guard, which does exactly what this person is asking. It encodes/obfuscates PHP code into "machine code".

Even better, try an OrderedDict (assuming you want something like a list). Closer to a list than a regular dict since the keys have an order just like list elements have an order. With a regular dict, the keys have an arbitrary order.

Note that this is available in Python 3 and 2.7. If you want to use with an earlier version of Python you can find installable modules to do that.

well it's deprecated in android M so you must make exception for android M and lower. Just add current theme on getColor function. You can get current theme with getTheme().

This will do the trick in fragment, you can replace getActivity() with getBaseContext(), yourContext, etc which hold your current context

if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.M) {
    yourTitle.setTextColor(getActivity().getResources().getColor(android.R.color.white, getActivity().getTheme()));
}else {
    yourTitle.setTextColor(getActivity().getResources().getColor(android.R.color.white));
}

*p.s : color is deprecated in M, but drawable is deprecated in L

I had to set

Container_height = Element1_height = Element2_height

.Container {
    position: relative;
}

.ElementOne, .Container ,.ElementTwo{
    width: 283px;
    height: 71px;
}

.ElementOne {
    position:absolute;
}

.ElementTwo{
    position:absolute;
}

Use can use z-index to set which one to be on top.

Extending Piotr's answer, if you also need a way to figure what to put in requirements.in, you can first use pip-chill to find the minimal set of required packages you have. By combining these tools, you can show the dependency reason why each package is installed. The full cycle looks like this:

1. Create virtual environment:
   $ python3 -m venv venv
2. Activate it:
   $ . venv/bin/activate
3. Install newest version of pip, pip-tools and pip-chill:
   (venv)$ pip install --upgrade pip
(venv)$ pip install pip-tools pip-chill
4. Build your project, install more pip packages, etc, until you want to save...
5. Extract minimal set of packages (ie, top-level without dependencies):
   (venv)$ pip-chill --no-version > requirements.in
6. Compile list of all required packages (showing dependency reasons):
   (venv)$ pip-compile requirements.in
7. Make sure the current installation is synchronized with the list:
   (venv)$ pip-sync

Here is my sudoku solver in python. It uses simple backtracking algorithm to solve the puzzle. For simplicity no input validations or fancy output is done. It's the bare minimum code which solves the problem.

Algorithm

1. Find all legal values of a given cell
2. For each legal value, Go recursively and try to solve the grid

Solution

It takes 9X9 grid partially filled with numbers. A cell with value 0 indicates that it is not filled.

Code

def findNextCellToFill(grid, i, j):
        for x in range(i,9):
                for y in range(j,9):
                        if grid[x][y] == 0:
                                return x,y
        for x in range(0,9):
                for y in range(0,9):
                        if grid[x][y] == 0:
                                return x,y
        return -1,-1

def isValid(grid, i, j, e):
        rowOk = all([e != grid[i][x] for x in range(9)])
        if rowOk:
                columnOk = all([e != grid[x][j] for x in range(9)])
                if columnOk:
                        # finding the top left x,y co-ordinates of the section containing the i,j cell
                        secTopX, secTopY = 3 *(i//3), 3 *(j//3) #floored quotient should be used here. 
                        for x in range(secTopX, secTopX+3):
                                for y in range(secTopY, secTopY+3):
                                        if grid[x][y] == e:
                                                return False
                        return True
        return False

def solveSudoku(grid, i=0, j=0):
        i,j = findNextCellToFill(grid, i, j)
        if i == -1:
                return True
        for e in range(1,10):
                if isValid(grid,i,j,e):
                        grid[i][j] = e
                        if solveSudoku(grid, i, j):
                                return True
                        # Undo the current cell for backtracking
                        grid[i][j] = 0
        return False

Testing the code

>>> input = [[5,1,7,6,0,0,0,3,4],[2,8,9,0,0,4,0,0,0],[3,4,6,2,0,5,0,9,0],[6,0,2,0,0,0,0,1,0],[0,3,8,0,0,6,0,4,7],[0,0,0,0,0,0,0,0,0],[0,9,0,0,0,0,0,7,8],[7,0,3,4,0,0,5,6,0],[0,0,0,0,0,0,0,0,0]]
>>> solveSudoku(input)
True
>>> input
[[5, 1, 7, 6, 9, 8, 2, 3, 4], [2, 8, 9, 1, 3, 4, 7, 5, 6], [3, 4, 6, 2, 7, 5, 8, 9, 1], [6, 7, 2, 8, 4, 9, 3, 1, 5], [1, 3, 8, 5, 2, 6, 9, 4, 7], [9, 5, 4, 7, 1, 3, 6, 8, 2], [4, 9, 5, 3, 6, 2, 1, 7, 8], [7, 2, 3, 4, 8, 1, 5, 6, 9], [8, 6, 1, 9, 5, 7, 4, 2, 3]]

The above one is very basic backtracking algorithm which is explained at many places. But the most interesting and natural of the sudoku solving strategies I came across is this one from here

It is very simple, just add a property:

public string Value {
  get { return textBox1.Text; }
  set { textBox1.Text = value; }
}

Using the Text property is a bit trickier, the UserControl class intentionally hides it. You'll need to override the attributes to put it back in working order:

[Browsable(true), EditorBrowsable(EditorBrowsableState.Always), Bindable(true)]
[DesignerSerializationVisibility(DesignerSerializationVisibility.Visible)]
public override string Text {
  get { return textBox1.Text; }
  set { textBox1.Text = value; }
}

This is a bit of an old post, but there is actually a way to do an onclick operator that calls a function instead of going anywhere in ASP.NET

helper.ActionLink("Choose", null, null, null, 
    new {@onclick = "Locations.Choose(" + location.Id + ")", @href="#"})

If you specify empty quotes or the like in the controller/action, it'll likely add a link to what you listed. You can do that, and do a return false in the onclick. You can read more about that at:

What's the effect of adding 'return false' to a click event listener?

If you're doing this onclick in an cshtml file, it'd be a bit cleaner to just specify the link yourself (a href...) instead of having the ActionLink handle it. If you're doing an HtmlHelper, like my example above is coming from, then I'd argue that calling ActionLink is an okay solution, or potentially better, is to use tagbuilder instead.

eq is used to compare integers use equal '=' instead , example:

if [ 'AAA' = 'ABC' ];
then 
    echo "the same" 
else 
    echo "not the same"
fi

good luck

open a website https://adviserinfo.sec.gov/compilation and click on button to download the file and even i want to close the pop up if it comes using python selenium

from selenium import webdriver
from selenium.webdriver.common.by import By
from selenium.webdriver.support.ui import WebDriverWait
from selenium.webdriver.support import expected_conditions as EC
import time
from selenium.webdriver.chrome.options import Options 

#For Mac - If you use windows change the chromedriver location
chrome_path = '/usr/local/bin/chromedriver'
driver = webdriver.Chrome(chrome_path)

chrome_options = webdriver.ChromeOptions()
chrome_options.add_argument("--disable-popup-blocking")

driver.maximize_window()
driver.get("https://adviserinfo.sec.gov/compilation")

# driver.get("https://adviserinfo.sec.gov/")
# tabName = driver.find_element_by_link_text("Investment Adviser Data")
# tabName.click()

time.sleep(3)

# report1 = driver.find_element_by_xpath("//div[@class='compilation-container ng-scope layout-column flex']//div[1]//div[1]//div[1]//div[2]//button[1]")

report1 = driver.find_element_by_xpath("//button[@analytics-label='IAPD - SEC Investment Adviser Report (GZIP)']")

# print(report1)
report1.click()

time.sleep(5)

driver.close()

You have to catch the error just as you're already doing for your save() call and since you're handling multiple errors here, you can try multiple calls sequentially in a single do-catch block, like so:

func deleteAccountDetail() {
    let entityDescription = NSEntityDescription.entityForName("AccountDetail", inManagedObjectContext: Context!)
    let request = NSFetchRequest()
    request.entity = entityDescription

    do {
        let fetchedEntities = try self.Context!.executeFetchRequest(request) as! [AccountDetail]

        for entity in fetchedEntities {
            self.Context!.deleteObject(entity)
        }

        try self.Context!.save()
    } catch {
        print(error)
    }
}

Or as @bames53 pointed out in the comments below, it is often better practice not to catch the error where it was thrown. You can mark the method as throws then try to call the method. For example:

func deleteAccountDetail() throws {
    let entityDescription = NSEntityDescription.entityForName("AccountDetail", inManagedObjectContext: Context!)
    let request = NSFetchRequest()

    request.entity = entityDescription

    let fetchedEntities = try Context.executeFetchRequest(request) as! [AccountDetail]

    for entity in fetchedEntities {
        self.Context!.deleteObject(entity)
    }

    try self.Context!.save()
}

Some times you may make silly mistakes like writing insert query on the same .sql file (in the same workspace/tab) so once you execute the insert query where your create query was written just above and already executed, it will again start executing along with the insert query.

This is the reason why we are getting the object name (table name) exists already, since it's getting executed for the second time.

So go to a separate tab to write the insert or drop or whatever queries you are about to execute.

Or else use comment lines preceding all queries in the same workspace like

CREATE -- …
-- Insert query
INSERT INTO -- …

I am always used DateDiff(day,date1,date2) to compare two date.

Checkout following example. Just copy that and run in Ms sql server. Also, try with change date by 31 dec to 30 dec and check result

BEGIN

declare @firstDate datetime
declare @secondDate datetime


declare @chkDay int

set @firstDate ='2010-12-31 15:13:48.593'
set @secondDate ='2010-12-31 00:00:00.000'

set @chkDay=Datediff(day,@firstDate ,@secondDate )

if @chkDay=0
    Begin
        Print 'Date is Same'
    end
else
    Begin
        Print 'Date is not Same'
    end
End

List<String> result = Arrays.asList("abc".split(""));

Such debugging is part of the development process and should not be the issue at runtime.

Methods don't trust other methods. They all trust you. That is the process of developing. Fix all bugs. Then methods don't have to "trust". There should be no doubt.

So, write it as it should be. Do not make methods check wether other methods are working correctly. That should be tested by the developer when they wrote that function. If you suspect a method to be not doing what you want, debug it.