Make the header looks like this for HttpClient in NG5:

let httpOptions = {
      headers: new HttpHeaders({
        'Content-Type': 'application/json',
        'apikey': this.apikey,
        'appkey': this.appkey,
      }),
      params: new HttpParams().set('program_id', this.program_id)
    };

You will be able to make api call with your localhost url, it works for me ..

• Please never forget your params columnd in the header: such as params: new HttpParams().set('program_id', this.program_id)

Spring Security can now leverage Spring MVC CORS support described in this blog post I wrote.

To make it work, you need to explicitly enable CORS support at Spring Security level as following, otherwise CORS enabled requests may be blocked by Spring Security before reaching Spring MVC.

If you are using controller level @CrossOrigin annotations, you just have to enable Spring Security CORS support and it will leverage Spring MVC configuration:

@EnableWebSecurity
public class WebSecurityConfig extends WebSecurityConfigurerAdapter {

    @Override
    protected void configure(HttpSecurity http) throws Exception {
        http.cors().and()...
    }
}

If you prefer using CORS global configuration, you can declare a CorsConfigurationSource bean as following:

@EnableWebSecurity
public class WebSecurityConfig extends WebSecurityConfigurerAdapter {

    @Override
    protected void configure(HttpSecurity http) throws Exception {
        http.cors().and()...
    }

    @Bean
    CorsConfigurationSource corsConfigurationSource() {
        UrlBasedCorsConfigurationSource source = new UrlBasedCorsConfigurationSource();
        source.registerCorsConfiguration("/**", new CorsConfiguration().applyPermitDefaultValues());
        return source;
    }
}

This approach supersedes the filter-based approach previously recommended.

You can find more details in the dedicated CORS section of Spring Security documentation.

Im using spring boot 2.1.0 and what worked for me was to

A. Add cors mappings by:

@Configuration
public class Config implements WebMvcConfigurer {
    @Override
    public void addCorsMappings(CorsRegistry registry) {
        registry.addMapping("/**").allowedOrigins("*");
    }
}

B. Add below configuration to my HttpSecurity for spring security

.cors().configurationSource(new CorsConfigurationSource() {

    @Override
    public CorsConfiguration getCorsConfiguration(HttpServletRequest request) {
        CorsConfiguration config = new CorsConfiguration();
        config.setAllowedHeaders(Collections.singletonList("*"));
        config.setAllowedMethods(Collections.singletonList("*"));
        config.addAllowedOrigin("*");
        config.setAllowCredentials(true);
        return config;
    }
})

Also in case of a Zuul proxy you can use this INSTEAD OF A and B (just use HttpSecurity.cors() to enable it in Spring security):

@Bean
public CorsFilter corsFilter() {
    final UrlBasedCorsConfigurationSource source = new UrlBasedCorsConfigurationSource();
    final CorsConfiguration config = new CorsConfiguration();
    config.setAllowCredentials(true);
    config.addAllowedOrigin("*");
    config.addAllowedHeader("*");
    config.addAllowedMethod("OPTIONS");
    config.addAllowedMethod("HEAD");
    config.addAllowedMethod("GET");
    config.addAllowedMethod("PUT");
    config.addAllowedMethod("POST");
    config.addAllowedMethod("DELETE");
    config.addAllowedMethod("PATCH");
    source.registerCorsConfiguration("/**", config);
    return new CorsFilter(source);
}

This may be not the full answer to your question, however if you are looking for way to disable csrf protection you can do:

@EnableWebSecurity
public class WebSecurityConfig extends WebSecurityConfigurerAdapter {

    @Override
    protected void configure(HttpSecurity http) throws Exception {
        http.authorizeRequests()
                .antMatchers("/web/admin/**").hasAnyRole(ADMIN.toString(), GUEST.toString())
                .anyRequest().permitAll()
                .and()
                .formLogin().loginPage("/web/login").permitAll()
                .and()
                .csrf().ignoringAntMatchers("/contact-email")
                .and()
                .logout().logoutUrl("/web/logout").logoutSuccessUrl("/web/").permitAll();
    }

    @Autowired
    public void configureGlobal(AuthenticationManagerBuilder auth) throws Exception {
        auth.inMemoryAuthentication()
                .withUser("admin").password("admin").roles(ADMIN.toString())
                .and()
                .withUser("guest").password("guest").roles(GUEST.toString());
    }

}

I have included full configuration but the key line is:

.csrf().ignoringAntMatchers("/contact-email")

Since I got here with my problem I will add this answer although it is not exactly relevant to the original question. When you are implementing an interface make sure you do not forget to add the type pointer on your member function declarations. Example:

type AnimalSounder interface {
    MakeNoise()
}

type Dog struct {
    Name string
    mean bool
    BarkStrength int
}

func (dog *Dog) MakeNoise() {
    //implementation
}

I forgot the *(dog Dog) part, I do not recommend it. Then you get into ugly trouble when calling MakeNoice on an AnimalSounder interface variable of type Dog.

Put your script in a file foo.py starting with

#!/usr/bin/python

Then give execute permission to that script using

chmod a+x foo.py

and use the full path of your foo.py file in your crontab.

See documentation of execve(2) which is handling the shebang.

How does it work?

When a JSF view (Facelets/JSP file) get built/restored, a JSF component tree will be produced. At that moment, the view build time, all binding attributes are evaluated (along with id attribtues and taghandlers like JSTL). When the JSF component needs to be created before being added to the component tree, JSF will check if the binding attribute returns a precreated component (i.e. non-null) and if so, then use it. If it's not precreated, then JSF will autocreate the component "the usual way" and invoke the setter behind binding attribute with the autocreated component instance as argument.

In effects, it binds a reference of the component instance in the component tree to a scoped variable. This information is in no way visible in the generated HTML representation of the component itself. This information is in no means relevant to the generated HTML output anyway. When the form is submitted and the view is restored, the JSF component tree is just rebuilt from scratch and all binding attributes will just be re-evaluated like described in above paragraph. After the component tree is recreated, JSF will restore the JSF view state into the component tree.

Component instances are request scoped!

Important to know and understand is that the concrete component instances are effectively request scoped. They're newly created on every request and their properties are filled with values from JSF view state during restore view phase. So, if you bind the component to a property of a backing bean, then the backing bean should absolutely not be in a broader scope than the request scope. See also JSF 2.0 specitication chapter 3.1.5:

3.1.5 Component Bindings

...

Component bindings are often used in conjunction with JavaBeans that are dynamically instantiated via the Managed Bean Creation facility (see Section 5.8.1 “VariableResolver and the Default VariableResolver”). It is strongly recommend that application developers place managed beans that are pointed at by component binding expressions in “request” scope. This is because placing it in session or application scope would require thread-safety, since UIComponent instances depends on running inside of a single thread. There are also potentially negative impacts on memory management when placing a component binding in “session” scope.

Otherwise, component instances are shared among multiple requests, possibly resulting in "duplicate component ID" errors and "weird" behaviors because validators, converters and listeners declared in the view are re-attached to the existing component instance from previous request(s). The symptoms are clear: they are executed multiple times, one time more with each request within the same scope as the component is been bound to.

And, under heavy load (i.e. when multiple different HTTP requests (threads) access and manipulate the very same component instance at the same time), you may face sooner or later an application crash with e.g. Stuck thread at UIComponent.popComponentFromEL, or Java Threads at 100% CPU utilization using richfaces UIDataAdaptorBase and its internal HashMap, or even some "strange" IndexOutOfBoundsException or ConcurrentModificationException coming straight from JSF implementation source code while JSF is busy saving or restoring the view state (i.e. the stack trace indicates saveState() or restoreState() methods and like).

Using binding on a bean property is bad practice

Regardless, using binding this way, binding a whole component instance to a bean property, even on a request scoped bean, is in JSF 2.x a rather rare use case and generally not the best practice. It indicates a design smell. You normally declare components in the view side and bind their runtime attributes like value, and perhaps others like styleClass, disabled, rendered, etc, to normal bean properties. Then, you just manipulate exactly that bean property you want instead of grabbing the whole component and calling the setter method associated with the attribute.

In cases when a component needs to be "dynamically built" based on a static model, better is to use view build time tags like JSTL, if necessary in a tag file, instead of createComponent(), new SomeComponent(), getChildren().add() and what not. See also How to refactor snippet of old JSP to some JSF equivalent?

Or, if a component needs to be "dynamically rendered" based on a dynamic model, then just use an iterator component (<ui:repeat>, <h:dataTable>, etc). See also How to dynamically add JSF components.

Composite components is a completely different story. It's completely legit to bind components inside a <cc:implementation> to the backing component (i.e. the component identified by <cc:interface componentType>. See also a.o. Split java.util.Date over two h:inputText fields representing hour and minute with f:convertDateTime and How to implement a dynamic list with a JSF 2.0 Composite Component?

Only use binding in local scope

However, sometimes you'd like to know about the state of a different component from inside a particular component, more than often in use cases related to action/value dependent validation. For that, the binding attribute can be used, but not in combination with a bean property. You can just specify an in the local EL scope unique variable name in the binding attribute like so binding="#{foo}" and the component is during render response elsewhere in the same view directly as UIComponent reference available by #{foo}. Here are several related questions where such a solution is been used in the answer:

• Validate input as required only if certain command button is pressed
• How to render a component only if another component is not rendered?
• JSF 2 dataTable row index without dataModel
• Primefaces dependent selectOneMenu and required="true"
• Validate a group of fields as required when at least one of them is filled
• How to change css class for the inputfield and label when validation fails?
• Getting JSF-defined component with Javascript

• Use an EL expression to pass a component ID to a composite component in JSF

  (and that's only from the last month...)

See also:

• How to use component binding in JSF right ? (request-scoped component in session scoped bean)
• View scope: java.io.NotSerializableException: javax.faces.component.html.HtmlInputText
• Binding attribute causes duplicate component ID found in the view

I think this is a bit cleaner pure CSS solution than Rens de Nobel's solution. Also this does not prevent from closing the dialog by clicking outside of it.

http://plnkr.co/edit/JCGVZQ?p=preview

Just add some CSS class to DIV container with .modal-dialog class to gain higher specificity than the bootstraps CSS, e.g. .centered.

HTML

<div class="modal fade bs-example-modal-lg" tabindex="-1" role="dialog" aria-labelledby="myLargeModalLabel">
  <div class="modal-dialog centered modal-lg">
    <div class="modal-content">
      ...
    </div>
  </div>
</div>

And make this .modal-dialog.centered container fixed and properly positioned.

CSS

.modal .modal-dialog.centered {
    position: fixed;
    bottom: 50%;
    right: 50%;
    transform: translate(50%, 50%);
}

Or even simpler using flexbox.

CSS

.modal {
    display: flex;
    align-items: center;
    justify-content: center;
}

To activate the cursor and select the columns you want to select use:

Windows: Alt+Shift+A

Mac: command + option + A

Linux-based OS: Alt+Shift+A

To deactivate, press the keys again.

This information was taken from DJ's Java Blog.

Besides de color, my problem was that I was setting the text using textlabel

bt.titleLabel?.text = title

and I solved changing to:

bt.setTitle(title, for: .normal)

I found a very nice solution on this site : http://weblogs.sqlteam.com/mladenp/archive/2014/01/10/simple-merging-of-pdf-documents-with-itextsharp-5-4-5.aspx

I update the method in this mode :

    public static bool MergePDFs(IEnumerable<string> fileNames, string targetPdf)
    {
        bool merged = true;
        using (FileStream stream = new FileStream(targetPdf, FileMode.Create))
        {
            Document document = new Document();
            PdfCopy pdf = new PdfCopy(document, stream);
            PdfReader reader = null;
            try
            {
                document.Open();
                foreach (string file in fileNames)
                {
                    reader = new PdfReader(file);
                    pdf.AddDocument(reader);
                    reader.Close();
                }
            }
            catch (Exception)
            {
                merged = false;
                if (reader != null)
                {
                    reader.Close();
                }
            }
            finally
            {
                if (document != null)
                {
                    document.Close();
                }
            }
        }
        return merged;
    }

compile function -

1. is called before the controller and link function.
2. In compile function, you have the original template DOM so you can make changes on original DOM before AngularJS creates an instance of it and before a scope is created
3. ng-repeat is perfect example - original syntax is template element, the repeated elements in HTML are instances
4. There can be multiple element instances and only one template element
5. Scope is not available yet
6. Compile function can return function and object
7. returning a (post-link) function - is equivalent to registering the linking function via the link property of the config object when the compile function is empty.
8. returning an object with function(s) registered via pre and post properties - allows you to control when a linking function should be called during the linking phase. See info about pre-linking and post-linking functions below.

syntax

function compile(tElement, tAttrs, transclude) { ... }

controller

1. called after the compile function
2. scope is available here
3. can be accessed by other directives (see require attribute)

pre - link

1. The link function is responsible for registering DOM listeners as well as updating the DOM. It is executed after the template has been cloned. This is where most of the directive logic will be put.

2. You can update the dom in the controller using angular.element but this is not recommended as the element is provided in the link function

3. Pre-link function is used to implement logic that runs when angular js has already compiled the child elements but before any of the child element's post link have been called

post-link

1. directive that only has link function, angular treats the function as a post link

2. post will be executed after compile, controller and pre-link funciton, so that's why this is considered the safest and default place to add your directive logic

jQuery allows you to change the default settings when you are attaching autocomplete to an input:

$('#autocomplete-form').autocomplete({
   maxHeight: 200, //you could easily change this maxHeight value
   lookup: array, //the array that has all of the autocomplete items
   onSelect: function(clicked_item){
      //whatever that has to be done when clicked on the item
   }
});

By my side, using Chrome navigator, I had to use DataView() to read an arrayBuffer

function _arrayBufferToBase64( tabU8A ) {
var binary = '';
let lecteur_de_donnees = new DataView(tabU8A);
var len = lecteur_de_donnees.byteLength;
var chaine = '';
var pos1;
for (var i = 0; i < len; i++) {
    binary += String.fromCharCode( lecteur_de_donnees.getUint8( i ) );
}
chaine = window.btoa( binary )
return chaine;}

A more general solution

axios({
  url: 'http://api.dev/file-download', //your url
  method: 'GET',
  responseType: 'blob', // important
}).then((response) => {
   const url = window.URL.createObjectURL(new Blob([response.data]));
   const link = document.createElement('a');
   link.href = url;
   link.setAttribute('download', 'file.pdf'); //or any other extension
   document.body.appendChild(link);
   link.click();
});

Check out the quirks at https://gist.github.com/javilobo8/097c30a233786be52070986d8cdb1743

Full credits to: https://gist.github.com/javilobo8

You must define the class before creating an instance of the class. Move the invocation of Something to the end of the script.

You can try to put the cart before the horse and invoke procedures before they are defined, but it will be an ugly hack and you will have to roll your own as defined here:

Make function definition in a python file order independent

var request = require('request');
 function updateClient(postData){
            var clientServerOptions = {
                uri: 'http://'+clientHost+''+clientContext,
                body: JSON.stringify(postData),
                method: 'POST',
                headers: {
                    'Content-Type': 'application/json'
                }
            }
            request(clientServerOptions, function (error, response) {
                console.log(error,response.body);
                return;
            });
        }

For this to work, your server must be something like:

var express = require('express');
var bodyParser = require('body-parser');
var app = express();
app.use(bodyParser.urlencoded({ extended: false }));
app.use(bodyParser.json())

var port = 9000;

app.post('/sample/put/data', function(req, res) {
    console.log('receiving data ...');
    console.log('body is ',req.body);
    res.send(req.body);
});

// start the server
app.listen(port);
console.log('Server started! At http://localhost:' + port);

The following works for me in Firefox and Chrome. In Firefox it even works from file:///

models/course.js

export function Course() {
    this.id = '';
    this.name = '';
};

models/student.js

import { Course } from './course.js';

export function Student() {
    this.firstName = '';
    this.lastName = '';
    this.course = new Course();
};

index.html

<div id="myDiv">
</div>
<script type="module">
    import { Student } from './models/student.js';

    window.onload = function () {
        var x = new Student();
        x.course.id = 1;
        document.getElementById('myDiv').innerHTML = x.course.id;
    }
</script>

Recursive way(variant of Stefan answer)

 MergeList(Node nodeA, Node nodeB ){
        if(nodeA==null){return nodeB};
        if(nodeB==null){return nodeA};

    if(nodeB.data<nodeA.data){
        Node returnNode = MergeNode(nodeA,nodeB.next);
        nodeB.next = returnNode;
        retturn nodeB;
    }else{
        Node returnNode = MergeNode(nodeA.next,nodeB);
        nodeA.next=returnNode;
        return nodeA;
    }

Consider below linked list to visualize this

2>4 list A 1>3 list B

Almost same answer(non recursive) as Stefan but with little more comments/meaningful variable name. Also covered double linked list in comments if someone is interested

Consider the example

5->10->15>21 // List1

2->3->6->20 //List2

Node MergeLists(List list1, List list2) {
  if (list1 == null) return list2;
  if (list2 == null) return list1;

if(list1.head.data>list2.head.data){
  listB =list2; // loop over this list as its head is smaller
  listA =list1;
} else {
  listA =list2; // loop over this list
  listB =list1;
}


listB.currentNode=listB.head;
listA.currentNode=listA.head;

while(listB.currentNode!=null){

  if(listB.currentNode.data<listA.currentNode.data){
    Node insertFromNode = listB.currentNode.prev; 
    Node startingNode = listA.currentNode;
    Node temp = inserFromNode.next;
    inserFromNode.next = startingNode;
    startingNode.next=temp;

    startingNode.next.prev= startingNode; // for doubly linked list
    startingNode.prev=inserFromNode;  // for doubly linked list


    listB.currentNode= listB.currentNode.next;
    listA.currentNode= listA.currentNode.next;

  } 
  else
  {
    listB.currentNode= listB.currentNode.next;

  }

}

Try using cmake itself. In the build directory, run:

cmake --build .

It means the data type is derived (implied) from the context.

From http://msdn.microsoft.com/en-us/library/bb383973.aspx

Beginning in Visual C# 3.0, variables that are declared at method scope can have an implicit type var. An implicitly typed local variable is strongly typed just as if you had declared the type yourself, but the compiler determines the type. The following two declarations of i are functionally equivalent:

var i = 10; // implicitly typed
int i = 10; //explicitly typed

var is useful for eliminating keyboard typing and visual noise, e.g.,

MyReallyReallyLongClassName x = new MyReallyReallyLongClassName();

becomes

var x = new MyReallyReallyLongClassName();

but can be overused to the point where readability is sacrificed.

I have found it helpful to add a custom exec script to my utilities that do this.

utilities.js

const { exec } = require('child_process')

module.exports.exec = (command) => {
  const process = exec(command)

  process.stdout.on('data', (data) => {
    console.log('stdout: ' + data.toString())
  })

  process.stderr.on('data', (data) => {
    console.log('stderr: ' + data.toString())
  })

  process.on('exit', (code) => {
    console.log('child process exited with code ' + code.toString())
  })
}

app.js

const { exec } = require('./utilities.js')

exec('coffee -cw my_file.coffee')

To collect more useful resources here:

As mentioned before D3.js is definitely the best visualization library for charts. To use it in AngularJS I developed angular-chart. It is an easy to use directive which connects D3.js with the AngularJS 2-Way-DataBinding. This way the chart gets automatically updated whenever you change the configuration options and at the same time the charts saves its state (zoom level, ...) to make it available in the AngularJS world.

Check out the examples to get convinced.

$("#co").click(function(){
   $(this).css({"backgroundColor" : "blue"});
});

After research the issue is that webkit browsers does not fire change event on autocomplete. My solution was to get the autofill class that webkit adds and trigger change event by myself.

setTimeout(function() {
 if($('input:-webkit-autofill').length > 0) {
   //do some stuff
 }
},300)

Here is a link for the issue in chromium. https://bugs.chromium.org/p/chromium/issues/detail?id=636425

You can get around this even more easily with the Rebase extension, just use hg pull --rebase and your commits are automatically re-comitted to the pulled revision, avoiding the branching issue.

Es5 forEach:

Array.prototype.forEach.call(form.elements, function (inpt) {
       if(inpt.name === name) {
             inpt.parentNode.removeChild(inpt);
       }
});

Otherwise the lovely for:

var input;
for(var i = 0; i < form.elements.length; i++) {
     input = form.elements[i];

      // ok my nice work with input, also you have the index with i (in foreach too you can get the index as second parameter (foreach is a wrapper around for, that offer a function to be called at each iteration.
}

When app-support wanted to answer ad-hock queries from the production-server using SSMS (that weren't catered for via reporting) I requested they use nolock. That way the 'main' business is not affected.

It`s definitely better to use COMPOSITE UNIQUE KEY, as @GranadaCoder offered, a little bit tricky example though:

ALTER IGNORE TABLE table_name ADD UNIQUES INDEX idx_name(some_id, another_id, one_more_id);

The ++ class of operators are expressions with side effects. This is something generally not found in Python.

For the same reason an assignment is not an expression in Python, thus preventing the common if (a = f(...)) { /* using a here */ } idiom.

Lastly I suspect that there operator are not very consistent with Pythons reference semantics. Remember, Python does not have variables (or pointers) with the semantics known from C/C++.

Left Leaning Red-Black Trees. A significantly simplified implementation of red-black trees by Robert Sedgewick published in 2008 (~half the lines of code to implement). If you've ever had trouble wrapping your head around the implementation of a Red-Black tree, read about this variant.

Very similar (if not identical) to Andersson Trees.

import urllib.request
import requests
from bs4 import BeautifulSoup

        r = requests.get('https://icons8.com/icons/set/favicon')

If you try to connect to such a site, you will get an indent error.

import urllib.request
import requests
from bs4 import BeautifulSoup


r = requests.get('https://icons8.com/icons/set/favicon')

Python cares about indents

for mysql its length not len

SELECT MAX(LENGTH(Desc)) FROM table_name

for finding out that user is new or old , Get user IP .

create a table for IPs and their visits timestamp .

check IF IP does not exists OR time()-saved_timestamp > 60*60*24 (for 1 day) ,edit the IP's timestamp to time() (means now) and increase your view one .

else , do nothing .

FYI : user IP is stored in $_SERVER['REMOTE_ADDR'] variable

Just putting it into a config file somewhere is the way it's usually done. Just make sure you:

1. disallow database access from any servers outside your network,
2. take care not to accidentally show the password to users (in an error message, or through PHP files accidentally being served as HTML, etcetera.)

Multiple functions, but this will give you what you need (tested on SQL Server 2008)

Edit: The following works not only for a time type, but for a datetime as well.

SELECT SUBSTRING(CONVERT(varchar(20),StartTime,22), 10, 11) AS Start, SUBSTRING(CONVERT(varchar(20),EndTime,22), 10, 11) AS End FROM [TableA];

private DataTable CreateDataTable(IList<T> item)
{
    Type type = typeof(T);
    var properties = type.GetProperties();

    DataTable dataTable = new DataTable();
    foreach (PropertyInfo info in properties)
    {
        dataTable.Columns.Add(new DataColumn(info.Name, Nullable.GetUnderlyingType(info.PropertyType) ?? info.PropertyType));
    }

    foreach (T entity in item)
    {
        object[] values = new object[properties.Length];
        for (int i = 0; i < properties.Length; i++)
        {
            values[i] = properties[i].GetValue(entity);
        }

        dataTable.Rows.Add(values);
    }
    return dataTable;
}

java.time

The proper (and easy) way to do date/time validation using Java 8+ is to use the java.time.format.DateTimeFormatter class. Using a regex for validation isn't really ideal for dates. For the example case in this question:

DateTimeFormatter formatter = DateTimeFormatter.ofPattern("yyyy-MM-dd");

try {
    LocalDate date = formatter.parse(text, LocalDate::from);
} catch (DateTimeParseException e) {
    // Thrown if text could not be parsed in the specified format
}

This code will parse the text, validate that it is a valid date, and also return the date as a LocalDate object. Note that the DateTimeFormatter class has a number of static predefined date formats matching ISO standards if your use case matches any of them.

If you remember which branch was checked out before (e.g. master) you could simply

git checkout master

to get out of detached HEAD state.

Generally speaking: git checkout <branchname> will get you out of that.

If you don't remember the last branch name, try

git checkout -

This also tries to check out your last checked out branch.

One more solution, that hasn't been posted, yet:

String regex = "\\p{Digit}+"; // uses POSIX character class

span element is display:inline; by default you need to make it inline-block or block

Change your CSS to be like this

span.first_title {
    margin-top: 20px;
    margin-left: 12px;
    font-weight: bold;
    font-size:24px;
    color: #221461;
    /*The change*/
    display:inline-block; /*or display:block;*/
}

After enabling "SQL Server and Windows Authentication mode"(check above answers on how to), navigate to the following.

1. Computer Mangement(in Start Menu)
2. Services And Applications
3. SQL Server Configuration Manager
4. SQL Server Network Configuration
5. Protocols for MSSQLSERVER
6. Right click on TCP/IP and Enable it.

Finally restart the SQL Server.

I use two very useful JS functions: http://blog.bassta.bg/2013/05/rangetopercent-and-percenttorange/

function rangeToPercent(number, min, max){
   return ((number - min) / (max - min));
}

and

function percentToRange(percent, min, max) {
   return((max - min) * percent + min);
}

If you are like me and Photoshop is out of your price range or just overkill for what you need. Acorn 5 is a much cheaper version of Photoshop with a lot of the same features. One of those features being a color change option. You can import all of the basic image formats including SVG and PNG. The color editing software works great and allows for basic color selection, RBG selection, hex code, or even a color grabber if you do not know the color. These color features, plus a whole lot image editing features, is definitely worth the $30. The only downside is that is currently only available on Mac.

For jquery < 1.8 you can use :

$('#selectedId option').slice(index1,index2).remove()

to remove a especific range of the select options.

I have met the same problem as I install it globally, then I try to install it locally, and it work.

class Test {
    public function yo() {
        return 'yoes';
    }
}

$var = 'Test';

$obj = new $var();
echo $obj->yo(); //yoes

This seems to work:

<html>
<title>
iPad Sound Test  - Auto Play
</title>
</head>
<body>
<audio id="audio" src="mp3test.mp3" controls="controls" loop="loop">
</audio>
<script type="text/javascript"> 
    window.onload = function() {
        var audioPlayer = document.getElementById("audio");
        audioPlayer.load();
        audioPlayer.play();
    };
    </script> 

</body>
</html>

See it in action here: http://www.johncoles.co.uk/ipad/test/1.html (Archived)

As of iOS 4.2 this no-longer works. Sorry.

I ran into similar problems when accessing the project files from different computers via a shared folder. In my case clean + reabuild did not help. Had to delete the bin and objects folders from the output directory.

In addition to provided answers:

it seems like parent element (the one with overflow:hidden) must not be display:inline. Changing to display:inline-block worked for me.

.outer {_x000D_
  position: relative;_x000D_
  border: 1px dotted black;_x000D_
  padding: 5px;_x000D_
  overflow: hidden;_x000D_
}_x000D_
.inner {_x000D_
  position: absolute;_x000D_
  left: 50%;_x000D_
  margin-left: -20px;_x000D_
  top: 70%;_x000D_
  width: 40px;_x000D_
  height: 80px;_x000D_
  background: yellow;_x000D_
}

<span class="outer">_x000D_
  Some text_x000D_
  <span class="inner"></span>_x000D_
</span>_x000D_
<span class="outer" style="display:inline-block;">_x000D_
  Some text_x000D_
  <span class="inner"></span>_x000D_
</span>

the secure way is encrypt your sensitive data by AES and the encryption key is derivation by password-based key derivation function (PBE), the master password used to encrypt/decrypt the encrypt key for AES.

master password -> secure key-> encrypt data by the key

You can use pbkdf2

from PBKDF2 import PBKDF2
from Crypto.Cipher import AES
import os
salt = os.urandom(8)    # 64-bit salt
key = PBKDF2("This passphrase is a secret.", salt).read(32) # 256-bit key
iv = os.urandom(16)     # 128-bit IV
cipher = AES.new(key, AES.MODE_CBC, iv)

make sure to store the salt/iv/passphrase , and decrypt using same salt/iv/passphase

Weblogic used similar approach to protect passwords in config files

Not sure if you're talking about Coverflow (scroll through images) or Quicklook (preview files in lightbox), try editing your question.

Here's some JS Coverflow implementations:

• MooFlow - Coverflow for MooTools
• Coverflow in JS proof of concept
• Coverflow using JS and CSS Transforms (Webkit only)

In my opinion using a BroadcastReceiver is a cleaner way to cancel a Notification:

In AndroidManifest.xml:

<receiver 
    android:name=.NotificationCancelReceiver" >
    <intent-filter android:priority="999" >
         <action android:name="com.example.cancel" />
    </intent-filter>
</receiver>

In java File:

Intent cancel = new Intent("com.example.cancel");
PendingIntent cancelP = PendingIntent.getBroadcast(context, 0, cancel, PendingIntent.FLAG_CANCEL_CURRENT);

NotificationCompat.Action actions[] = new NotificationCompat.Action[1];

NotificationCancelReceiver

public class NotificationCancelReceiver extends BroadcastReceiver {
    @Override
    public void onReceive(Context context, Intent intent) {
        //Cancel your ongoing Notification
    };
}

Try this first

npm install --save-dev @angular-devkit/build-angular

If some error come again for missing packages try

npm install

Well, you can try this (when running the quoted, the input to the first question should quoted with '):

"""
print("What's your name? ")
myName = input()
print("It's nice to meet you " + myName)
print("Number of characters is ")
print(len(myName))
age = input("What's your age? ")
print("You will be " + str(int(age)+1) + " next year.")

"""
a = input()
print(a)
print(a*5)

Whatever enclosed between """ will be commented.

If you are looking for single-line comments then it's #.

The above solution work perfectly but if you are using Fullscreen activity(translucent status bar) then these solutions might not work. so for fullscreen use this code inside your onCreate function on your Activity.

if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.KITKAT) {
        Window w = getWindow();
        w.setFlags(WindowManager.LayoutParams.FLAG_LAYOUT_IN_SCREEN , WindowManager.LayoutParams.FLAG_LAYOUT_IN_SCREEN );
        getWindow().setFlags(WindowManager.LayoutParams.FLAG_TRANSLUCENT_NAVIGATION, WindowManager.LayoutParams.TYPE_STATUS_BAR);
    }

Example:

  protected void onCreate(Bundle savedInstanceState) {
    if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.KITKAT) {
        Window w = getWindow();
        w.setFlags(WindowManager.LayoutParams.FLAG_LAYOUT_IN_SCREEN , WindowManager.LayoutParams.FLAG_LAYOUT_IN_SCREEN );
        getWindow().setFlags(WindowManager.LayoutParams.FLAG_TRANSLUCENT_NAVIGATION, WindowManager.LayoutParams.TYPE_STATUS_BAR);
    }
    
    super.onCreate(savedInstanceState);

I don't use nested classes much, but I do use them now and then. Especially when I define some kind of data type, and I then want to define a STL functor designed for that data type.

For example, consider a generic Field class that has an ID number, a type code and a field name. If I want to search a vector of these Fields by either ID number or name, I might construct a functor to do so:

class Field
{
public:
  unsigned id_;
  string name_;
  unsigned type_;

  class match : public std::unary_function<bool, Field>
  {
  public:
    match(const string& name) : name_(name), has_name_(true) {};
    match(unsigned id) : id_(id), has_id_(true) {};
    bool operator()(const Field& rhs) const
    {
      bool ret = true;
      if( ret && has_id_ ) ret = id_ == rhs.id_;
      if( ret && has_name_ ) ret = name_ == rhs.name_;
      return ret;
    };
    private:
      unsigned id_;
      bool has_id_;
      string name_;
      bool has_name_;
  };
};

Then code that needs to search for these Fields can use the match scoped within the Field class itself:

vector<Field>::const_iterator it = find_if(fields.begin(), fields.end(), Field::match("FieldName"));

Use the built-in function dir().

You could do:

var list = new[] { o, o1 }.ToList();

There are lots of ways of skinning this cat, but basically they'll all use type inference somewhere - which means you've got to be calling a generic method (possibly as an extension method). Another example might be:

public static List<T> CreateList<T>(params T[] elements)
{
     return new List<T>(elements);
}

var list = CreateList(o, o1);

You get the idea :)

In my case, the issue was with my Xcode build scheme. When you run react-native run-ios you may see something like,

• info Found Xcode workspace "myproject.xcworkspace"*

• info Building (using "xcodebuild -workspace myproject.xcworkspace -configuration Debug -scheme myproject -destination id=xxxxxxxx-xxxxx-xxxxx-xxxx-xxxxxxxxx -derivedDataPath build/myproject")*

In this case, there should be a scheme named myproject in your ios configurations. The way I fixed it is,

Double clicked on myproject.xcworkspace in ios directory (to open workspace with Xcode)

Navigate into Product > Scheme > Manage Schemes...

Created a Scheme appropriately with name myproject (this name is case-sensitive)

Ran react-native run-ios in project directory

You need to properly decode the source text. Most likely the source text is in UTF-8 format, not ASCII.

Because you do not provide any context or code for your question it is not possible to give a direct answer.

I suggest you study how unicode and character encoding is done in Python:

http://docs.python.org/2/howto/unicode.html

Straightforward and One-liner answer.

function flatten_array(array $array)
{
    return iterator_to_array(
         new \RecursiveIteratorIterator(new \RecursiveArrayIterator($array)));
}

Usage:

$array = [
    'name' => 'Allen Linatoc',
    'profile' => [
        'age' => 21,
        'favourite_games' => [ 'Call of Duty', 'Titanfall', 'Far Cry' ]
    ]
];

print_r( flatten_array($array) );

Output (in PsySH):

Array
(
    [name] => Allen Linatoc
    [age] => 21
    [0] => Call of Duty
    [1] => Titanfall
    [2] => Far Cry
)

Now it's pretty up to you now how you'll handle the keys. Cheers

EDIT (2017-03-01)

Quoting Nigel Alderton's concern/issue:

Just to clarify, this preserves keys (even numeric ones) so values that have the same key are lost. For example $array = ['a',['b','c']] becomes Array ([0] => b, [1] => c ). The 'a' is lost because 'b' also has a key of 0

Quoting Svish's answer:

Just add false as second parameter ($use_keys) to the iterator_to_array call

why not use lambda?

auto no_space = [](char ch) -> bool {
  return !std::isspace<char>(ch, std::locale::classic());
};
auto ltrim = [](std::string& s) -> std::string& {
  s.erase(s.begin(), std::find_if(s.begin(), s.end(), no_space));
  return s;
};
auto rtrim = [](std::string& s) -> std::string& {
  s.erase(std::find_if(s.rbegin(), s.rend(), no_space).base(), s.end());
  return s;
};
auto trim_copy = [](std::string s) -> std::string& { return ltrim(rtrim(s)); };
auto trim = [](std::string& s) -> std::string& { return ltrim(rtrim(s)); };

After modifying the References in the Web.config file as mentioned above, we resolved the references.

I was facing similar issue.

For us we have reference Microsoft.Data.Edm.dll and OData.dll and other assemblies from Program Files:

C:\Program Files (x86)\Microsoft WCF Data Services\5.0
                          \bin\.NETFramework\Microsoft.Data.Edm.dll

and

C:\Program Files (x86)\Microsoft WCF Data Services\5.0
                        \bin\.NETFramework\Microsoft.Data.OData.dll

and version was 5.6.4.

Once I change the reference of both assemblies to C:\....Project\packages\Microsoft.Data.Edm.5.6.0 , the issue was resolved

In Support Library 27.1.0 and later, Google has introduced new methods requireContext() and requireActivity() methods.

Eg:ContextCompat.getColor(requireContext(), R.color.soft_gray)

More info here

@Ahmed

Below is code that specifies fields from a named range for insertion into MS Access. The nice thing about this code is that you can name your fields in Excel whatever the hell you want (If you use * then the fields have to match exactly between Excel and Access) as you can see I have named an Excel column "Haha" even though the Access column is called "dte".

Sub test()
    dbWb = Application.ActiveWorkbook.FullName
    dsh = "[" & Application.ActiveSheet.Name & "$]" & "Data2"  'Data2 is a named range


sdbpath = "C:\Users\myname\Desktop\Database2.mdb"
sCommand = "INSERT INTO [main] ([dte], [test1], [values], [values2]) SELECT [haha],[test1],[values],[values2] FROM [Excel 8.0;HDR=YES;DATABASE=" & dbWb & "]." & dsh

Dim dbCon As New ADODB.Connection
Dim dbCommand As New ADODB.Command

dbCon.Open "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" & sdbpath & "; Jet OLEDB:Database Password=;"
dbCommand.ActiveConnection = dbCon

dbCommand.CommandText = sCommand
dbCommand.Execute

dbCon.Close


End Sub

Using node I have a collection of stuff @stuff and access it like this:

- each stuff in stuffs
  p
    = stuff.sentence

I've grabbed the entries() method of formData from @moison answer and from MDN it's said that :

The FormData.entries() method returns an iterator allowing to go through all key/value pairs contained in this object. The key of each pair is a USVString object; the value either a USVString, or a Blob.

but the only issue is that mobile browser (android and safari are not supported ) and IE and Safari desktop too

but basically here is my approach :

let theForm =  document.getElementById("contact"); 

theForm.onsubmit = function(event) {
    event.preventDefault();

    let rawData = new FormData(theForm);
    let data = {};

   for(let pair of rawData.entries()) {
     data[pair[0]] = pair[1]; 
    }
    let contactData = JSON.stringify(data);
    console.warn(contactData);
    //here you can send a post request with content-type :'application.json'

};

the code can be found here

For Visual Studio 2015 the connection string is:

"Data Source=(localdb)\MSSQLLocalDB;AttachDbFilename=|DataDirectory|Database1.mdf;Integrated Security=True"

A string in Javascript is already a character array.

You can simply access any character in the array as you would any other array.

var s = "overpopulation";
alert(s[0]) // alerts o.

UPDATE

As is pointed out in the comments below, the above method for accessing a character in a string is part of ECMAScript 5 which certain browsers may not conform to.

An alternative method you can use is charAt(index).

var s = "overpopulation";
    alert(s.charAt(0)) // alerts o.

Make sure you have jQuery UI base and the color picker widget included on your page (as well as a copy of jQuery 1.3):

<link rel="stylesheet" href="http://dev.jquery.com/view/tags/ui/latest/themes/flora/flora.all.css" type="text/css" media="screen" title="Flora (Default)">

<script type="text/javascript" src="http://dev.jquery.com/view/tags/ui/latest/ui/ui.core.js"></script>

<script type="text/javascript" src="http://dev.jquery.com/view/tags/ui/latest/ui/ui.colorpicker.js"></script>

If you have those included, try posting your source so we can see what's going on.

A better approach to creating constants in Python is to take inspiration from the excellent attrs library, which helps Python programmers create classes without boilerplate. The short-con package does the same for constants by providing a convenience wrapper around attr.make_class. [Disclaimer: I am the author of short-con.]

Values can be declared explicitly via either a dict or kwargs: These examples do the same thing. The constants() function supports all features of the library, and cons() is a helper for simple kwarg-based usage.

from short_con import constants, cons

Pieces = constants('Pieces', dict(king = 0, queen = 9, rook = 5, bishop = 3, knight = 3, pawn = 1))
Pieces = cons('Pieces', king = 0, queen = 9, rook = 5, bishop = 3, knight = 3, pawn = 1)

For situations when the values are the same as (or can be derived from) the attribute names, usage is even more compact. Just supply names as a space-delimited string, list, or tuple.

NAMES = 'KING QUEEN ROOK BISHOP KNIGHT PAWN'
xs = NAMES.split()

Pieces = constants('Pieces', NAMES)      # All of these do the same thing.
Pieces = constants('Pieces', xs)
Pieces = constants('Pieces', tuple(xs))

The name-based usages support a few stylistic conventions: uppercase or lowercase attribute names, along with enum-style values.

The underlying values are directly accessible, unlike constants created by the built-in enum library:

Pieces.QUEEN        # short-con usage
Pieces.QUEEN.value  # enum library usage

And the object is directly iterable and convertible to other collections:

for name, value in Pieces:
    print(name, value)

d = dict(Pieces)
tups = list(Pieces)

In my case, this error occurred because I was typing the commit message and my notebook turned off.

I did these steps to fix the error:

• git checkout -b backup-branch # Create a backup branch
• git reset --hard HEAD~4 # Reset to the commit where everything works well. In my case, I had to back 4 commits in the head, that is until my head be at the point before I was typing the commit message. Before doing this step, copy the hash of the commits you will reset, in my case I copied the hash of the 4 last commits
• git cherry-pick <commit-hash> # Cherry pick the reseted commits (in my case are 4 commits, so I did this step 4 times) from the old branch to the new branch.
• git push origin backup-branch # Push the new branch to be sure everything works well
• git branch -D your-branch # Delete the branch locally ('your-branch' is the branch with problem)
• git push origin :your-branch # Delete the branch from remote
• git branch -m backup-branch your-branch # Rename the backup branch to have the name of the branch that had the problem
• git push origin your-branch # Push the new branch
• git push origin :backup-branch # Delete the backup branch from remote

If under Windows and user Git for Windows and the manager for managing the credentials (aka Git-Credential-Manager-for-Windows Link) the problem is that there is no easy way to switch amongst users when pushing to GitHub over https using OAuth tokens.

The reason is that the token is stored as:

• Internet Address: git:https://github.com
• Username: Personal Access Token
• Password: OAuth_Token

Variations of the URL in Internet Address don't work, for example:

• git:https://[email protected]
• git:https://github.com/username
• ...

The solution: namespaces. This is found in the details for the configuration of the Git-Credential-Manager-for-Windows:

• https://github.com/Microsoft/Git-Credential-Manager-for-Windows/blob/master/Docs/Configuration.md

Quoting from it:

namespace

Sets the namespace for stored credentials.

By default the GCM uses the 'git' namespace for all stored credentials, setting this configuration value allows for control of the namespace used globally, or per host.

git config --global credential.namespace name

Now, store your credential in the Windows Credential Manager as:

• Internet Address: git.username:https://github.com
• Username: Personal Access Token
• Password: OAuth_Token

Notice that we have changed: git -> git.username (where you change username to your actual username or for the sake of it, to whatever you may want as unique identifier)

Now, inside the repository where you want to use the specific entry, execute:

git config credential.namespace git.username

(Again ... replace username with your desired value)

Your .git/config will now contain:

[credential]
    namespace = git.username

Et voilá! The right credential will be pulled from the Windows Credential Store.

This, of course, doesn't change which user/e-mail is pushing. For that you have to configure the usual user.name and user.email

Assuming your example text is representative of all the text, one line would consume about 75 bytes on my machine:

In [3]: sys.getsizeof('usedfor zipper fasten_coat')
Out[3]: 75

Doing some rough math:

75 bytes * 8,000,000 lines / 1024 / 1024 = ~572 MB

So roughly 572 meg to store the strings alone for one of these files. Once you start adding in additional, similarly structured and sized files, you'll quickly approach your virtual address space limits, as mentioned in @ShadowRanger's answer.

If upgrading your python isn't feasible for you, or if it only kicks the can down the road (you have finite physical memory after all), you really have two options: write your results to temporary files in-between loading in and reading the input files, or write your results to a database. Since you need to further post-process the strings after aggregating them, writing to a database would be the superior approach.

You will need to kill the port by trying to use the following command on the terminal

$ sudo killall -9 nodejs

if you dont wanna use DISTINCT use GROUP BY

 SELECT * FROM myTABLE GROUP BY EmailAddress

Yes: sc.getConf().getAll()

Which uses the method:

SparkConf.getAll()

as accessed by

SparkContext.sc.getConf()

Note the Underscore: that makes this tricky. I had to look at the spark source code to figure it out ;)

But it does work:

In [4]: sc.getConf().getAll()
Out[4]:
[(u'spark.master', u'local'),
 (u'spark.rdd.compress', u'True'),
 (u'spark.serializer.objectStreamReset', u'100'),
 (u'spark.app.name', u'PySparkShell')]

In order to forcefully let the namenode leave safemode, following command should be executed:

 bin/hadoop dfsadmin -safemode leave

You are getting Unknown command error for your command as -safemode isn't a sub-command for hadoop fs, but it is of hadoop dfsadmin.

Also after the above command, I would suggest you to once run hadoop fsck so that any inconsistencies crept in the hdfs might be sorted out.

Update:

Use hdfs command instead of hadoop command for newer distributions. The hadoop command is being deprecated:

hdfs dfsadmin -safemode leave

hadoop dfsadmin has been deprecated and so is hadoop fs command, all hdfs related tasks are being moved to a separate command hdfs.

Mod(x,1) is the easiest way I think.

Use GSON library for that. Here is the sample code

List<String> foo = new ArrayList<String>();
foo.add("A");
foo.add("B");
foo.add("C");

String json = new Gson().toJson(foo );

Here is the maven dependency for Gson

<dependencies>
    <!--  Gson: Java to Json conversion -->
    <dependency>
        <groupId>com.google.code.gson</groupId>
        <artifactId>gson</artifactId>
        <version>2.2.2</version>
        <scope>compile</scope>
    </dependency>
</dependencies>

Or you can directly download jar from here and put it in your class path

http://code.google.com/p/google-gson/downloads/detail?name=gson-1.0.jar&can=4&q=

To send Json to client you can use spring or in simple servlet add this code

response.getWriter().write(json);

As far as I know the permission system in Linux is set up in such a way to prevent exactly what you are trying to accomplish.

I think the best you can do is to give your Linux user a custom unzip one-liner to run on the prompt:

unzip zip_name.zip && chmod +x script_name.sh

If there are multiple scripts that you need to give execute permission to, write a grant_perms.sh as follows:

#!/bin/bash
# file: grant_perms.sh

chmod +x script_1.sh
chmod +x script_2.sh
...
chmod +x script_n.sh

(You can put the scripts all on one line for chmod, but I found separate lines easier to work with in vim and with shell script commands.)

And now your unzip one-liner becomes:

unzip zip_name.zip && source grant_perms.sh

Note that since you are using source to run grant_perms.sh, it doesn't need execute permission

I also recommend to use SerializationUtils tool. I want to make a ajust on a wrong comment by @Abilash. The SerializationUtils.serialize() method is not restricted to 1024 bytes, contrary to another answer here.

public static byte[] serialize(Object object) {
    if (object == null) {
        return null;
    }
    ByteArrayOutputStream baos = new ByteArrayOutputStream(1024);
    try {
        ObjectOutputStream oos = new ObjectOutputStream(baos);
        oos.writeObject(object);
        oos.flush();
    }
    catch (IOException ex) {
        throw new IllegalArgumentException("Failed to serialize object of type: " + object.getClass(), ex);
    }
    return baos.toByteArray();
}

At first sight, you may think that new ByteArrayOutputStream(1024) will only allow a fixed size. But if you take a close look at the ByteArrayOutputStream, you will figure out the the stream will grow if necessary:

This class implements an output stream in which the data is written into a byte array. The buffer automatically grows as data is written to it. The data can be retrieved using toByteArray() and toString().

if you are using mozilla firefox than just install an add-on called firebug.

In your page press f12 in mozilla and firebug will open.

go for the net tab in firebug and in this tab go in the xhr tab. and reload your page. you will get 5 options in xhr Params Headers Response HTML and Cookies

so by going in response and html you can see which response you are getting after your ajax call.

Please let me know if you have any issue.

Use GitZip online tool. It allows to download a sub-directory of a github repository as a zip file. No git commands needed!

The storage engine (MyISAM) DOES support repair table. You should be able to repair it.

If the repair fails then it's a sign that the table is very corrupted, you have no choice but to restore it from backups.

If you have other systems (e.g. non-production with same software versions and schema) with an identical table then you might be able to fix it with some hackery (copying the frm an MYI files, followed by a repair).

In essence, the trick is to avoid getting broken tables in the first place. This means always shutting your db down cleanly, never having it crash and never having hardware or power problems. In practice this isn't very likely, so if durability matters you may want to consider a more crash-safe storage engine.

export is a Bash builtin, echo is an executable in your $PATH. So export is interpreted by Bash as is, without spawning a new process.

You need to get Bash to interpret your command, which you can pass as a string with the -c option:

bash -c "export foo=bar; echo \$foo"

ALSO:

Each invocation of bash -c starts with a fresh environment. So something like:

bash -c "export foo=bar"
bash -c "echo \$foo"

will not work. The second invocation does not remember foo.

Instead, you need to chain commands separated by ; in a single invocation of bash -c:

bash -c "export foo=bar; echo \$foo"

Haha, I have been stuck at that point a while ago as well, so I am glad I can help you out with a solution, that worked for me at least :)

What you want to do is define a new style within values/styles.xml so it looks like this

<resources>
    <style name = "AppTheme" parent = "android:Theme.Holo.Light.DarkActionBar">
        <!-- Customize your theme here. -->
    </style>

    <style name = "NoActionBar" parent = "@android:style/Theme.Holo.Light">
        <item name = "android:windowActionBar">false</item>
        <item name = "android:windowNoTitle">true</item>
    </style>

</resources>

Only the NoActionBar style is intresting for you. At last you have to set is as your application's theme in the AndroidManifest.xml so it looks like this

<application
    android:allowBackup = "true"
    android:icon = "@drawable/ic_launcher"
    android:label = "@string/app_name"
    android:theme = "@style/NoActionBar"   <!--This is the important line-->
    >
    <activity
    [...]

I hope this helps, if not, let me know.

Yes, according to RFC 3696 apostrophes are valid as long as they come before the @ symbol.

Try to run dos2unix on your windows imported files first

So apparently there are multiple versions of easy_install and pip. It seems to be a big mess. Anyway, this is what I did to install Django for Python 2.7 on Ubuntu 12.10:

$ sudo easy_install-2.7 pip
Searching for pip
Best match: pip 1.1
Adding pip 1.1 to easy-install.pth file
Installing pip-2.7 script to /usr/local/bin

Using /usr/lib/python2.7/dist-packages
Processing dependencies for pip
Finished processing dependencies for pip

$ sudo pip-2.7 install django
Downloading/unpacking django
  Downloading Django-1.5.1.tar.gz (8.0Mb): 8.0Mb downloaded
  Running setup.py egg_info for package django

    warning: no previously-included files matching '__pycache__' found under directory '*'
    warning: no previously-included files matching '*.py[co]' found under directory '*'
Installing collected packages: django
  Running setup.py install for django
    changing mode of build/scripts-2.7/django-admin.py from 644 to 755

    warning: no previously-included files matching '__pycache__' found under directory '*'
    warning: no previously-included files matching '*.py[co]' found under directory '*'
    changing mode of /usr/local/bin/django-admin.py to 755
Successfully installed django
Cleaning up...

$ python
Python 2.7.3 (default, Sep 26 2012, 21:51:14) 
[GCC 4.7.2] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import django
>>> 

This code works for me just fine as of mongoDB v4.2 and mongoose 5.9.9:

const Ids = ['id1','id2','id3']
const results = await Model.find({ _id: Ids})

and the Ids can be of type ObjectId or String

If you are on linux and using apache2 server then we may need to override apache2.conf file also beside changes on .htaccess file. Find apache2 configuration file on /etc/apache2/apache2.conf .

Search Directory /var/www/ Change AllowOverride None -> AllowOverride All

<Directory /var/www/>
    Options Indexes FollowSymLinks
    AllowOverride All
    Require all granted
</Directory

I have searched a lot for a solution in which I can compare two array of objects with different attribute names (something like a left outer join). I came up with this solution. Here I used Lodash. I hope this will help you.

var Obj1 = [
    {id:1, name:'Sandra'},
    {id:2, name:'John'},   
];

var Obj2 = [
    {_id:2, name:'John'},
    {_id:4, name:'Bobby'}
];

var Obj3 = lodash.differenceWith(Obj1, Obj2, function (o1, o2) {
    return o1['id'] === o2['_id']
});

console.log(Obj3);
//  {id:1, name:'Sandra'}

Note that there is a distinction between traditional "beta testing" which is done by professional QA engineers, and "public beta testing" which is releasing your product to the public before it's ready : )

You can do "beta testing" -- loading to specific iPhones/iPods your testers will be using. You can't do "public beta testing" -- pre-releasing to the public.

SELECT *
FROM pg_settings
WHERE name = 'port';

Take care to strip out newlines from any string you pass to setData(). Otherwise an exception gets thrown.

Also note that even if you do that, then subsequently get that data again using getData(), CKEditor puts the line breaks back in.

GET Request with JSON Query Param

package com.rest.jersey.jerseyclient;
import com.sun.jersey.api.client.Client;
import com.sun.jersey.api.client.ClientResponse;
import com.sun.jersey.api.client.WebResource;

public class JerseyClientGET {

    public static void main(String[] args) {
        try {               

            String BASE_URI="http://vaquarkhan.net:8080/khanWeb";               
            Client client = Client.create();    
            WebResource webResource = client.resource(BASE_URI);

            ClientResponse response = webResource.accept("application/json").get(ClientResponse.class);

            /*if (response.getStatus() != 200) {
               throw new RuntimeException("Failed : HTTP error code : "
                + response.getStatus());
            }
*/
            String output = webResource.path("/msg/sms").queryParam("search","{\"name\":\"vaquar\",\"surname\":\"khan\",\"ext\":\"2020\",\"age\":\"34\""}").get(String.class);
            //String output = response.getEntity(String.class);

            System.out.println("Output from Server .... \n");
            System.out.println(output);                         

        } catch (Exception e) {

            e.printStackTrace();    
        }    
    }    
}

Post Request :

package com.rest.jersey.jerseyclient;

import com.rest.jersey.dto.KhanDTOInput;
import com.sun.jersey.api.client.Client;
import com.sun.jersey.api.client.ClientResponse;
import com.sun.jersey.api.client.WebResource;
import com.sun.jersey.api.client.config.ClientConfig;
import com.sun.jersey.api.client.config.DefaultClientConfig;
import com.sun.jersey.api.json.JSONConfiguration;

public class JerseyClientPOST {

    public static void main(String[] args) {
        try {

            KhanDTOInput khanDTOInput = new KhanDTOInput("vaquar", "khan", "20", "E", null, "2222", "8308511500");                      

            ClientConfig clientConfig = new DefaultClientConfig();

            clientConfig.getFeatures().put( JSONConfiguration.FEATURE_POJO_MAPPING, Boolean.TRUE);

            Client client = Client.create(clientConfig);

               // final HTTPBasicAuthFilter authFilter = new HTTPBasicAuthFilter(username, password);
               // client.addFilter(authFilter);
               // client.addFilter(new LoggingFilter());

            //
            WebResource webResource = client
                    .resource("http://vaquarkhan.net:12221/khanWeb/messages/sms/api/v1/userapi");

              ClientResponse response = webResource.accept("application/json")
                .type("application/json").put(ClientResponse.class, khanDTOInput);


            if (response.getStatus() != 200) {
                throw new RuntimeException("Failed : HTTP error code :" + response.getStatus());
            }

            String output = response.getEntity(String.class);

            System.out.println("Server response .... \n");
            System.out.println(output);

        } catch (Exception e) {

            e.printStackTrace();

        }    
    }    
}

OpenJDK is a reference model and open source, while Oracle JDK is an implementation of the OpenJDK and is not open source. Oracle JDK is more stable than OpenJDK.

OpenJDK is released under GPL v2 license whereas Oracle JDK is licensed under Oracle Binary Code License Agreement.

OpenJDK and Oracle JDK have almost the same code, but Oracle JDK has more classes and some bugs fixed.

So if you want to develop enterprise/commercial software I would suggest to go for Oracle JDK, as it is thoroughly tested and stable.

I have faced lot of problems with application crashes using OpenJDK, which are fixed just by switching to Oracle JDK

yet another fun case:

scrollview.superview.userInteractionEnabled must be true

I wasted 2+hrs chasing this just to figure out the parent is UIImageView which, naturally, has userInteractionEnabled == false

Simply type:

list(my_set)

This will turn a set in the form {'1','2'} into a list in the form ['1','2'].

if you hit this, and don't really want to try and handle adding a day in code, then let the DB do it..

myDate >= '20090101 00:00:00' AND myDate < DATEADD(day,1,'20090101 00:00:00')

If you do include the time portion: make sure it references midnight. Otherwise you can simply omit the time:

myDate >= '20090101' AND myDate < DATEADD(day,1,'20090101')

and not worry about it.

None of the above solutions worked for me, however instead I wrapped my content in a div (#outer-wrap) and then used the following CSS:

body {
   overflow: hidden;
}
#outer-wrap {
    -webkit-overflow-scrolling: touch;
     height: 100vh;
     overflow: auto;
}

Obviously only works in browsers that support viewport widths/heights of course.

You need to double check the PATH environment setting. C:\Program Files\Java\jdk-13 you currently have there is not correct. Please make sure you have the bin subdirectory for the latest JDK version at the top of the PATH list.

java.exe executable is in C:\Program Files\Java\jdk-13\bin directory, so that is what you need to have in PATH.

Use this tool to quickly verify or edit the environment variables on Windows. It allows to reorder PATH entries. It will also highlight invalid paths in red.

If you want your code to run on lower JDK versions as well, change the target bytecode version in the IDE. See this answer for the relevant screenshots.

See also this answer for the Java class file versions. What happens is that you build the code with Java 13 and 13 language level bytecode (target) and try to run it with Java 8 which is the first (default) Java version according to the PATH variable configuration.

The solution is to have Java 13 bin directory in PATH above or instead of Java 8. On Windows you may have C:\Program Files (x86)\Common Files\Oracle\Java\javapath added to PATH automatically which points to Java 8 now:

If it's the case, remove the highlighted part from PATH and then logout/login or reboot for the changes to have effect. You need to Restart as administrator first to be able to edit the System variables (see the button on the top right of the system variables column).

Just to elucidate a bit on @emsr's comment in @unwind's answer, if one is not fortunate enough to have a C++11 compiler (say GCC 4.2.1), and one wants to embed the newlines in the string (either char * or class string), one can write something like this:

const char *text =
  "This text is pretty long, but will be\n"
  "concatenated into just a single string.\n"
  "The disadvantage is that you have to quote\n"
  "each part, and newlines must be literal as\n"
  "usual.";

Very obvious, true, but @emsr's short comment didn't jump out at me when I read this the first time, so I had to discover this for myself. Hopefully, I've saved someone else a few minutes.

this is one of the ways you can use this function, it is when you want access a variable of another class and change the output based on that variable.

   override func prepare(for segue: UIStoryboardSegue, sender: Any?)  {
        let something = segue.destination as! someViewController
       something.aVariable = anotherVariable
   }

a = ['1', '2', '3']
ls = []
count = False

while ls != a :
    print(a[count])
    if a[count] != a[-1] :
        count = count + 1
    else :
        count = False

Restart while loop.

First you should know, how much memory is allocated when you define and allocate memory in below case.

   typedef struct person{
       char firstName[100], surName[51]
  } PERSON;
  PERSON *testPerson = (PERSON*) malloc(sizeof(PERSON));

1) The sizeof(PERSON) now returns 151 bytes (Doesn't include padding)

2) The memory of 151 bytes is allocated in heap.

3) To free, call free(testPerson).

but If you declare your structure as

  typedef struct person{
      char *firstName, *surName;
  } PERSON;
  PERSON *testPerson = (PERSON*) malloc(sizeof(PERSON));

then

1) The sizeof(PERSON) now returns 8 bytes (Doesn't include padding)

2) Need to allocate memory for firstName and surName by calling malloc() or calloc(). like

        testPerson->firstName = (char *)malloc(100);

3) To free, first free the members in the struct than free the struct. i.e, free(testPerson->firstName); free(testPerson->surName); free(testPerson);

onCreate(Bundle savedInstanceState) you will get the Bundle null when activity get starts first time and it will get in use when activity orientation get changed .......

http://www.gitshah.com/2011/03/how-to-handle-screen-orientation_28.html

Android provides another elegant way of achieving this. To achieve this, we have to override a method called onSaveInstanceState(). Android platform allows the users to save any instance state. Instance state can be saved in the Bundle. Bundle is passed as argument to the onSaveInstanceState method.

we can load the saved instance state from the Bundle passed as argument to the onCreate method. We can also load the saved instance state in onRestoreInstanceState method. But I will leave that for the readers to figure out.

Apache Commons

    for (Date dateIter = fromDate; !dateIter.after(toDate); dateIter = DateUtils.addDays(dateIter, 1)) {
        // ...
    }

CONVERT(varchar,GETDATE(),102)

I always use pseudo elements :before and :after for changing the appearance of checkboxes and radio buttons. it's works like a charm.

Refer this link for more info

CODEPEN

Steps

1. Hide the default checkbox using css rules like visibility:hidden or opacity:0 or position:absolute;left:-9999px etc.
2. Create a fake checkbox using :before element and pass either an empty or a non-breaking space '\00a0';
3. When the checkbox is in :checked state, pass the unicode content: "\2713", which is a checkmark;
4. Add :focus style to make the checkbox accessible.
5. Done

Here is how I did it.

.box {_x000D_
  background: #666666;_x000D_
  color: #ffffff;_x000D_
  width: 250px;_x000D_
  padding: 10px;_x000D_
  margin: 1em auto;_x000D_
}_x000D_
p {_x000D_
  margin: 1.5em 0;_x000D_
  padding: 0;_x000D_
}_x000D_
input[type="checkbox"] {_x000D_
  visibility: hidden;_x000D_
}_x000D_
label {_x000D_
  cursor: pointer;_x000D_
}_x000D_
input[type="checkbox"] + label:before {_x000D_
  border: 1px solid #333;_x000D_
  content: "\00a0";_x000D_
  display: inline-block;_x000D_
  font: 16px/1em sans-serif;_x000D_
  height: 16px;_x000D_
  margin: 0 .25em 0 0;_x000D_
  padding: 0;_x000D_
  vertical-align: top;_x000D_
  width: 16px;_x000D_
}_x000D_
input[type="checkbox"]:checked + label:before {_x000D_
  background: #fff;_x000D_
  color: #333;_x000D_
  content: "\2713";_x000D_
  text-align: center;_x000D_
}_x000D_
input[type="checkbox"]:checked + label:after {_x000D_
  font-weight: bold;_x000D_
}_x000D_
_x000D_
input[type="checkbox"]:focus + label::before {_x000D_
    outline: rgb(59, 153, 252) auto 5px;_x000D_
}

<div class="content">_x000D_
  <div class="box">_x000D_
    <p>_x000D_
      <input type="checkbox" id="c1" name="cb">_x000D_
      <label for="c1">Option 01</label>_x000D_
    </p>_x000D_
    <p>_x000D_
      <input type="checkbox" id="c2" name="cb">_x000D_
      <label for="c2">Option 02</label>_x000D_
    </p>_x000D_
    <p>_x000D_
      <input type="checkbox" id="c3" name="cb">_x000D_
      <label for="c3">Option 03</label>_x000D_
    </p>_x000D_
  </div>_x000D_
</div>

Much more stylish using :before and :after

body{_x000D_
  font-family: sans-serif;  _x000D_
}_x000D_
_x000D_
.container {_x000D_
    margin-top: 50px;_x000D_
    margin-left: 20px;_x000D_
    margin-right: 20px;_x000D_
}_x000D_
.checkbox {_x000D_
    width: 100%;_x000D_
    margin: 15px auto;_x000D_
    position: relative;_x000D_
    display: block;_x000D_
}_x000D_
_x000D_
.checkbox input[type="checkbox"] {_x000D_
    width: auto;_x000D_
    opacity: 0.00000001;_x000D_
    position: absolute;_x000D_
    left: 0;_x000D_
    margin-left: -20px;_x000D_
}_x000D_
.checkbox label {_x000D_
    position: relative;_x000D_
}_x000D_
.checkbox label:before {_x000D_
    content: '';_x000D_
    position: absolute;_x000D_
    left: 0;_x000D_
    top: 0;_x000D_
    margin: 4px;_x000D_
    width: 22px;_x000D_
    height: 22px;_x000D_
    transition: transform 0.28s ease;_x000D_
    border-radius: 3px;_x000D_
    border: 2px solid #7bbe72;_x000D_
}_x000D_
.checkbox label:after {_x000D_
  content: '';_x000D_
    display: block;_x000D_
    width: 10px;_x000D_
    height: 5px;_x000D_
    border-bottom: 2px solid #7bbe72;_x000D_
    border-left: 2px solid #7bbe72;_x000D_
    -webkit-transform: rotate(-45deg) scale(0);_x000D_
    transform: rotate(-45deg) scale(0);_x000D_
    transition: transform ease 0.25s;_x000D_
    will-change: transform;_x000D_
    position: absolute;_x000D_
    top: 12px;_x000D_
    left: 10px;_x000D_
}_x000D_
.checkbox input[type="checkbox"]:checked ~ label::before {_x000D_
    color: #7bbe72;_x000D_
}_x000D_
_x000D_
.checkbox input[type="checkbox"]:checked ~ label::after {_x000D_
    -webkit-transform: rotate(-45deg) scale(1);_x000D_
    transform: rotate(-45deg) scale(1);_x000D_
}_x000D_
_x000D_
.checkbox label {_x000D_
    min-height: 34px;_x000D_
    display: block;_x000D_
    padding-left: 40px;_x000D_
    margin-bottom: 0;_x000D_
    font-weight: normal;_x000D_
    cursor: pointer;_x000D_
    vertical-align: sub;_x000D_
}_x000D_
.checkbox label span {_x000D_
    position: absolute;_x000D_
    top: 50%;_x000D_
    -webkit-transform: translateY(-50%);_x000D_
    transform: translateY(-50%);_x000D_
}_x000D_
.checkbox input[type="checkbox"]:focus + label::before {_x000D_
    outline: 0;_x000D_
}

<div class="container"> _x000D_
  <div class="checkbox">_x000D_
     <input type="checkbox" id="checkbox" name="" value="">_x000D_
     <label for="checkbox"><span>Checkbox</span></label>_x000D_
  </div>_x000D_
_x000D_
  <div class="checkbox">_x000D_
     <input type="checkbox" id="checkbox2" name="" value="">_x000D_
     <label for="checkbox2"><span>Checkbox</span></label>_x000D_
  </div>_x000D_
</div>

One should NEVER treat "BLANK" and NULL as the same.

Back in the olden days before there was a SQL standard, Oracle made the design decision that empty strings in VARCHAR/ VARCHAR2 columns were NULL and that there was only one sense of NULL (there are relational theorists that would differentiate between data that has never been prompted for, data where the answer exists but is not known by the user, data where there is no answer, etc. all of which constitute some sense of NULL). By the time that the SQL standard came around and agreed that NULL and the empty string were distinct entities, there were already Oracle users that had code that assumed the two were equivalent. So Oracle was basically left with the options of breaking existing code, violating the SQL standard, or introducing some sort of initialization parameter that would change the functionality of potentially large number of queries. Violating the SQL standard (IMHO) was the least disruptive of these three options.

Oracle has left open the possibility that the VARCHAR data type would change in a future release to adhere to the SQL standard (which is why everyone uses VARCHAR2 in Oracle since that data type's behavior is guaranteed to remain the same going forward).

I know this is a very old question, but I've been asked by someone else something similar.

I don't have TeraData, but can't you do the following?

SELECT employee_number,
       course_code,
       MAX(course_completion_date)                                     AS max_course_date,
       MAX(course_completion_date) OVER (PARTITION BY employee_number) AS max_date
FROM employee_course_completion
WHERE course_code IN ('M910303', 'M91301R', 'M91301P')
GROUP BY employee_number, course_code

The GROUP BY now ensures one row per course per employee. This means that you just need a straight MAX() to get the max_course_date.

Before your GROUP BY was just giving one row per employee, and the MAX() OVER() was trying to give multiple results for that one row (one per course).

Instead, you now need the OVER() clause to get the MAX() for the employee as a whole. This is now legitimate because each individual row gets just one answer (as it is derived from a super-set, not a sub-set). Also, for the same reason, the OVER() clause now refers to a valid scalar value, as defined by the GROUP BY clause; employee_number.

Perhaps a short way of saying this would be that an aggregate with an OVER() clause must be a super-set of the GROUP BY, not a sub-set.

Create your query with a GROUP BY at the level that represents the rows you want, then specify OVER() clauses if you want to aggregate at a higher level.

When getting element by class name, don't forget the return value is an array; Hence this code:

document.getElementByClassName("dropdown-menu").scrollTop = 0

Would not work. Use code below instead.

document.getElementByClassName("dropdown-menu")[0].scrollTop = 0

I figured other people might encounter a similar problem as I did; so this should do the trick.

You can use int casting which allows the base specification.

int(b, 2)  # Convert a binary string to a decimal int.

how about doing it the way hooktube does it? they don't actually use the video URL for the html5 element, but the google video redirector url that calls upon that video. check out here's how they present some despacito random video...

<video id="player-obj" controls="" src="https://redirector.googlevideo.com/videoplayback?ratebypass=yes&amp;mt=1510077993----SKIPPED----amp;utmg=ytap1,,hd720"><source>Your browser does not support HTML5 video.</video>

the code is for the following video page https://hooktube.com/watch?v=72UO0v5ESUo

youtube to mp3 on the other hand has turned into extremely monetized monster that returns now download.html on half of video download requests... annoying...

the 2 links in this answer are to my personal experiences with both resources. how hooktube is nice and fresh and actually helps avoid censorship and geo restrictions.. check it out, it's pretty cool. and youtubeinmp4 is a popup monster now known as ConvertInMp4...

How about:

 hasSiblings
 or isFollowedBySiblings (or isFolloedByItems, or isFollowedByOtherItems etc.)
 or moreItems

Although I think that even though you shouldn't make a habit of braking 'the rules' sometimes the best way to accomplish something may be to make an exception of the rule (Code Complete guidelines), and in your case, name the variable isNotLast

Try: $futureDate=date('Y-m-d',strtotime('+1 year',$startDate));

SET SCAN OFF is obsolete http://download-uk.oracle.com/docs/cd/B10501_01/server.920/a90842/apc.htm

With:

FILES = $(shell ls)

indented underneath all like that, it's a build command. So this expands $(shell ls), then tries to run the command FILES ....

If FILES is supposed to be a make variable, these variables need to be assigned outside the recipe portion, e.g.:

FILES = $(shell ls)
all:
        echo $(FILES)

Of course, that means that FILES will be set to "output from ls" before running any of the commands that create the .tgz files. (Though as Kaz notes the variable is re-expanded each time, so eventually it will include the .tgz files; some make variants have FILES := ... to avoid this, for efficiency and/or correctness.¹)

If FILES is supposed to be a shell variable, you can set it but you need to do it in shell-ese, with no spaces, and quoted:

all:
        FILES="$(shell ls)"

However, each line is run by a separate shell, so this variable will not survive to the next line, so you must then use it immediately:

        FILES="$(shell ls)"; echo $$FILES

This is all a bit silly since the shell will expand * (and other shell glob expressions) for you in the first place, so you can just:

        echo *

as your shell command.

Finally, as a general rule (not really applicable to this example): as esperanto notes in comments, using the output from ls is not completely reliable (some details depend on file names and sometimes even the version of ls; some versions of ls attempt to sanitize output in some cases). Thus, as l0b0 and idelic note, if you're using GNU make you can use $(wildcard) and $(subst ...) to accomplish everything inside make itself (avoiding any "weird characters in file name" issues). (In sh scripts, including the recipe portion of makefiles, another method is to use find ... -print0 | xargs -0 to avoid tripping over blanks, newlines, control characters, and so on.)

¹The GNU Make documentation notes further that POSIX make added ::= assignment in 2012. I have not found a quick reference link to a POSIX document for this, nor do I know off-hand which make variants support ::= assignment, although GNU make does today, with the same meaning as :=, i.e., do the assignment right now with expansion.

Note that VAR := $(shell command args...) can also be spelled VAR != command args... in several make variants, including all modern GNU and BSD variants as far as I know. These other variants do not have $(shell) so using VAR != command args... is superior in both being shorter and working in more variants.

The problem is with the TAB. From the tab's title I assume you first made a right click > "Select Rows - Limit 1000". But when you enter a different query in the opening tab, it won't show anything any more... Don't know why. Open a new tab for manual queries, then it will work.

Check out this link for more details.

To find files which are created in last one hour in current directory, you can use -amin

find . -amin -60 -type f

This will find files which are created with in last 1 hour.

RIGHT ( character_expression , integer_expression )

SELECT RIGHT(column, 4) FROM ...

Also a list of other string functions.

As others have said, in general you use @synthesize to have the compiler generate the getters and/ or settings for you, and @dynamic if you are going to write them yourself.

There is another subtlety not yet mentioned: @synthesize will let you provide an implementation yourself, of either a getter or a setter. This is useful if you only want to implement the getter for some extra logic, but let the compiler generate the setter (which, for objects, is usually a bit more complex to write yourself).

However, if you do write an implementation for a @synthesize'd accessor it must still be backed by a real field (e.g., if you write -(int) getFoo(); you must have an int foo; field). If the value is being produce by something else (e.g. calculated from other fields) then you have to use @dynamic.

I had this problem as I created a class "Response.cs" inside a folder named "Response". So VS was catching the new Response () as Folder/namespace.

So I changed the class name to StatusResponse.cs and called new StatusResponse().This solved the issue.

Context bindings in .NET 3.5 might be just what you're looking for. There are three out of the box: BasicHttpContextBinding, NetTcpContextBinding, and WSHttpContextBinding. Context protocol basically passes key-value pairs in the message header. Check out Managing State With Durable Services article on MSDN magazine.

Before The execution of following code, I assume you have created a database and a table (with columns Name (varchar), Age(INT) and Address(varchar)) inside that database. Also please update your SQL Server name , UserID, password, DBname and table name in the code below.

In the code. I have used VBScript and embedded it in HTML. Try it out!

<!DOCTYPE html>
<html>
<head>
<script type="text/vbscript">
<!--    

Sub Submit_onclick()
Dim Connection
Dim ConnString
Dim Recordset

Set connection=CreateObject("ADODB.Connection")
Set Recordset=CreateObject("ADODB.Recordset")
ConnString="DRIVER={SQL Server};SERVER=*YourSQLserverNameHere*;UID=*YourUserIdHere*;PWD=*YourpasswordHere*;DATABASE=*YourDBNameHere*"
Connection.Open ConnString

dim form1
Set form1 = document.Register

Name1 = form1.Name.value
Age1 = form1.Age.Value
Add1 = form1.address.value

connection.execute("INSERT INTO [*YourTableName*] VALUES ('"&Name1 &"'," &Age1 &",'"&Add1 &"')")

End Sub

//-->
</script>
</head>
<body>

<h2>Please Fill details</h2><br>
<p>
<form name="Register">
<pre>
<font face="Times New Roman" size="3">Please enter the log in credentials:<br>
Name:   <input type="text" name="Name">
Age:        <input type="text" name="Age">
Address:        <input type="text" name="address">
<input type="button" id ="Submit" value="submit" /><font></form> 
</p>
</pre>
</body>
</html>

Have you tried somethig like this?

.showme{display: none;}
.showhim:hover .showme{display : block;}
.hideme{display:block;}
.showhim:hover .hideme{display:none;}

<div class="showhim">HOVER ME
  <div class="showme">hai</div>
  <div class="hideme">bye</div>
</div>

I dont know any reason why it shouldn't be possible.

Solution with no extra packages:

var min = lst.OrderBy(i => i.StartDate).FirstOrDefault();
var max = lst.OrderBy(i => i.StartDate).LastOrDefault();

also you can wrap it into extension:

public static class LinqExtensions
{
    public static T MinBy<T, TProp>(this IEnumerable<T> source, Func<T, TProp> propSelector)
    {
        return source.OrderBy(propSelector).FirstOrDefault();
    }

    public static T MaxBy<T, TProp>(this IEnumerable<T> source, Func<T, TProp> propSelector)
    {
        return source.OrderBy(propSelector).LastOrDefault();
    }
}

and in this case:

var min = lst.MinBy(i => i.StartDate);
var max = lst.MaxBy(i => i.StartDate);

By the way... O(n^2) is not the best solution. Paul Betts gave fatster solution than my. But my is still LINQ solution and it's more simple and more short than other solutions here.

All the other answers about setting only the JAVA_HOME are not entirely right. Eclipse does namely not consult the JAVA_HOME. Look closer at the error message:

...in your current PATH

It literally said PATH, not JAVA_HOME.

Rightclick My Computer and choose Properties (or press Winkey+Pause), go to the tab Advanced, click the button Environment Variables, in the System Variables list at the bottom select Path (no, not Classpath), click Edit and add ;c:\path\to\jdk\bin to the end of the value.

Alternatively and if not present, you can also add JAVA_HOME environment variable and make use of it in the PATH. In the same dialogue click New and add JAVA_HOME with the value of c:\path\to\jdk. Then you can add ;%JAVA_HOME%\bin to end of the value of the Path setting.

Another easy method to solve this issue adding the style attribute:

$('.selector').attr('style', 'width:500px !important');

With using pathlib module, indentation isn't needed.

import pathlib
pathlib.Path("output.txt").write_text("Purchase Amount: {}" .format(TotalAmount))

As of python 3.6, f-strings is available.

pathlib.Path("output.txt").write_text(f"Purchase Amount: {TotalAmount}")

You can use ternary expression. There are two ways to do this:

<div ng-style="myVariable > 100 ? {'color': 'red'} : {'color': 'blue'}"></div>

or...

<div ng-style="{'color': (myVariable > 100) ? 'red' : 'blue' }"></div>

Very nice example using paste and substitute to typeset both symbols (mathplot) and variables at http://vis.supstat.com/2013/04/mathematical-annotation-in-r/

Here is a ggplot adaptation

library(ggplot2)
x_mean <- 1.5
x_sd <- 1.2
N <- 500

n <- ggplot(data.frame(x <- rnorm(N, x_mean, x_sd)),aes(x=x)) +
    geom_bar() + stat_bin() +
    labs(title=substitute(paste(
             "Histogram of random data with ",
             mu,"=",m,", ",
             sigma^2,"=",s2,", ",
             "draws = ", numdraws,", ",
             bar(x),"=",xbar,", ",
             s^2,"=",sde),
             list(m=x_mean,xbar=mean(x),s2=x_sd^2,sde=var(x),numdraws=N)))

print(n)

I had the same issue after changing the user which was running the MSSQLSERVER-Service

To solve incorrect SPNs with SQL Server I used this tool

http://www.microsoft.com/en-us/download/details.aspx?id=39046 - Microsoft® Kerberos Configuration Manager for SQL Server

In my case it worked pretty well.

Let me answer this question:
First of all, using annotations as our configure method is just a convenient method instead of coping the endless XML configuration file.

The @Idannotation is inherited from javax.persistence.Id, indicating the member field below is the primary key of current entity. Hence your Hibernate and spring framework as well as you can do some reflect works based on this annotation. for details please check javadoc for Id

The @GeneratedValue annotation is to configure the way of increment of the specified column(field). For example when using Mysql, you may specify auto_increment in the definition of table to make it self-incremental, and then use

@GeneratedValue(strategy = GenerationType.IDENTITY)

in the Java code to denote that you also acknowledged to use this database server side strategy. Also, you may change the value in this annotation to fit different requirements.

1. Define Sequence in database

For instance, Oracle has to use sequence as increment method, say we create a sequence in Oracle:

create sequence oracle_seq;

2. Refer the database sequence

Now that we have the sequence in database, but we need to establish the relation between Java and DB, by using @SequenceGenerator:

@SequenceGenerator(name="seq",sequenceName="oracle_seq")

sequenceName is the real name of a sequence in Oracle, name is what you want to call it in Java. You need to specify sequenceName if it is different from name, otherwise just use name. I usually ignore sequenceName to save my time.

3. Use sequence in Java

Finally, it is time to make use this sequence in Java. Just add @GeneratedValue:

@GeneratedValue(strategy=GenerationType.SEQUENCE, generator="seq")

The generator field refers to which sequence generator you want to use. Notice it is not the real sequence name in DB, but the name you specified in name field of SequenceGenerator.

4. Complete

So the complete version should be like this:

public class MyTable
{
    @Id
    @SequenceGenerator(name="seq",sequenceName="oracle_seq")        
    @GeneratedValue(strategy=GenerationType.SEQUENCE, generator="seq")               
    private Integer pid;
}

Now start using these annotations to make your JavaWeb development easier.

You can return "ResponseEntity" object. Using "ResponseEntity" object is very convenient both at the time of constructing the response object (that contains Response Body and HTTP Status Code) and at the time of getting information out of the response object.

Methods like getHeaders(), getBody(), getContentType(), getStatusCode() etc makes the work of reading the ResponseEntity object very easy.

You should be using ResponseEntity object with a http status code of 204(No Content), which is specifically to specify that the request has been processed properly and the response body is intentionally blank. Using appropriate Status Codes to convey the right information is very important, especially if you are making an API that is going to be used by multiple client applications.

The simplest method (inline, assuming a and b are two given arrays):

byte[] c = (new String(a, cch) + new String(b, cch)).getBytes(cch);

This, of course, works with more than two summands and uses a concatenation charset, defined somewhere in your code:

static final java.nio.charset.Charset cch = java.nio.charset.StandardCharsets.ISO_8859_1;

Or, in more simple form, without this charset:

byte[] c = (new String(a, "l1") + new String(b, "l1")).getBytes("l1");

But you need to suppress UnsupportedEncodingException which is unlikely to be thrown.

The fastest method:

public static byte[] concat(byte[] a, byte[] b) {
    int lenA = a.length;
    int lenB = b.length;
    byte[] c = Arrays.copyOf(a, lenA + lenB);
    System.arraycopy(b, 0, c, lenA, lenB);
    return c;
}

there is no need to js or jquery. to stop page reloading just specify the button type as 'button'. if you dont specify the button type, browser will set it to 'reset' or 'submit' witch cause to page reload.

 <button type='button'>submit</button> 

Raw queries are more vulnerable to SQL Injection. I will suggest using query() method instead.

public boolean Exists(String searchItem) {

    String[] columns = { COLUMN_NAME };
    String selection = COLUMN_NAME + " =?";
    String[] selectionArgs = { searchItem };
    String limit = "1";

    Cursor cursor = db.query(TABLE_NAME, columns, selection, selectionArgs, null, null, null, limit);
    boolean exists = (cursor.getCount() > 0);
    cursor.close();
    return exists;
}

Source: here

Sometimes you still need to use FirstOrDefault if you have to do different tests. If the Key component of your dictionnary is nullable, you can do this:

thisTag = _tags.FirstOrDefault(t => t.Key.SubString(1,1) == 'a');
if(thisTag.Key != null) { ... }

Using FirstOrDefault, the returned KeyValuePair's key and value will both be null if no match is found.

I just spent several hours on this stupid problem

First, change permissions using this in terminal

find htdocs -type f -exec chmod 664 {} + -o -type d -exec chmod 775 {} +

I don't know what the difference is between 664 and 775 I did both 775 like this Also htdocs needs the directory path for instance for me it was

/usr/local/apache2/htdocs 

find htdocs -type f -exec chmod 775 {} + -o -type d -exec chmod 775 {} +

This is the other dumb thing too

make sure that your image src link is your domain name for instance

src="http://www.fakedomain.com/images/photo.png"

Be sure to have

EnableSendfile off in httpd.conf file
EnableMMAP off in httpd.conf file

You edit those using pico in terminal

I also created a directory for images specifically so that when you type in the browser address bar domainname.com/images, you will get a list of photos which can be downloaded and need to be downloaded successfully to indicate image files that are working properly

<Directory /usr/local/apache2/htdocs/images>
AddType images/png .png
</Directory>

And those are the solutions I have tried, now I have functioning images... yay!!!

Onto the next problem(s)

> SELECT COUNT(*) AS total FROM foo WHERE bar= 'value';

Problem

I've had the same issue before. After analyzing my code, I realized that attempting to reset the iterator inside of loops slightly increases the time complexity and it also makes the code a bit ugly.

Solution

Open the file and save the rows to a variable in memory.

# initialize list of rows
rows = []

# open the file and temporarily name it as 'my_file'
with open('myfile.csv', 'rb') as my_file:

    # set up the reader using the opened file
    myfilereader = csv.DictReader(my_file)

    # loop through each row of the reader
    for row in myfilereader:
        # add the row to the list of rows
        rows.append(row)

Now you can loop through rows anywhere in your scope without dealing with an iterator.

try

<select onchange="location=this.value">_x000D_
    <option value="unit_01.htm">Unit 1</option>_x000D_
    <option value="#5.2" selected >Bookmark 2</option>_x000D_
</select>

I had to refresh my DBModel. That solved it

if($_FILES['img_name']['name']!=""){
   echo "File Present";
}else{
  echo "Empty file";
}

Just order by count(*) desc and you'll get the highest (if you combine it with limit 1)

In your user settings add:

"C_Cpp.default.includePath":["path1","path2"]

You cannot write data's to asset/Raw folder, since it is packed(.apk) and not expandable in size.

If your application need to download dependency files from server, you can go for APK Expansion Files provided by android (http://developer.android.com/guide/market/expansion-files.html).

say your array is called arr

do

arr[arr.Length - 1]

Cover the offending elements with an invisible block, using a pseudo element: :before or :after

a:before {
//IE No click hack by covering the element.
  display:block;
  position:absolute;
  height:100%;
  width:100%;
  content:' ';
}

Thus you're click lands on the parent element. No good, if the parent is clickable, but works well otherwise.

If you have only one checkbox, you can do this easily with just ng-model:

<input type="checkbox" ng-model="checked"/>
<button ng-disabled="!checked"> Next </button>

And initialize $scope.checked in your Controller (default=false). The official doc discourages the use of ng-init in that case.

Dialect property is used by hibernate in following ways

1. To generate Optimized SQL queries.
2. If you have more than one DB then to talk with particular DB you want.
3. To set default values for hibernate configuration file properties based on the DB software we use even though they are not specifed in configuration file.

Better use int.TryParse to avoid exceptions;

var numbers = sNumbers
            .Split(',')
            .Where(x => int.TryParse(x, out _))
            .Select(int.Parse)
            .ToList();

Personally I like the navigationDrawer in Google Drive official app. It just works and works great. I agree that the navigation drawer shouldn't move the action bar because is the key point to open and close the navigation drawer.

If you are still trying to get that behavior I recently create a project Called SherlockNavigationDrawer and as you may expect is the implementation of the Navigation Drawer with ActionBarSherlock and works for pre Honeycomb devices. Check it:

SherlockNavigationDrawer github

For the record, I like Job's answer above but I'm curious about a solution just using the variable name by itself in a "do-nothing" statement:

void foo(int x) {
    x; /* unused */
    ...
}

Sure, this has drawbacks; for instance, without the "unused" note it looks like a mistake rather than an intentional line of code.

The benefit is that no DEFINE is needed and it gets rid of the warning.

Are there any performance, optimization, or other differences?

https://stackoverflow.com/a/38858040/395097 this answer is complete.

This answer is for - you already have an app which was targeting below 24, and now you are upgrading to targetSDKVersion >= 24.

In Android N, only the file uri exposed to 3rd party app is changed. (Not the way we were using it before). So change only the places where you are sharing the path with 3rd party app (Camera in my case)

In our app we were sending uri to Camera app, in that location we are expecting the camera app to store the captured image.

1. For android N, we generate new Content:// uri based url pointing to file.
2. We generate usual File api based path for the same (using older method).

Now we have 2 different uri for same file. #1 is shared with Camera app. If the camera intent is success, we can access the image from #2.

Hope this helps.

hashMaps can't have duplicate keys. That said, you can create a map with list values:

Map<Integer, List<String>>

However, using this approach will have performance implications.

Sharing a few functions which I created for dates:

Please note that I wanted to get time for a particular location (not just UTC time). If you want UTC time, just remove loc variable and .In(loc) function call.

func GetTimeStamp() string {
     loc, _ := time.LoadLocation("America/Los_Angeles")
     t := time.Now().In(loc)
     return t.Format("20060102150405")
}
func GetTodaysDate() string {
    loc, _ := time.LoadLocation("America/Los_Angeles")
    current_time := time.Now().In(loc)
    return current_time.Format("2006-01-02")
}

func GetTodaysDateTime() string {
    loc, _ := time.LoadLocation("America/Los_Angeles")
    current_time := time.Now().In(loc)
    return current_time.Format("2006-01-02 15:04:05")
}

func GetTodaysDateTimeFormatted() string {
    loc, _ := time.LoadLocation("America/Los_Angeles")
    current_time := time.Now().In(loc)
    return current_time.Format("Jan 2, 2006 at 3:04 PM")
}

func GetTimeStampFromDate(dtformat string) string {
    form := "Jan 2, 2006 at 3:04 PM"
    t2, _ := time.Parse(form, dtformat)
    return t2.Format("20060102150405")
}

This works everywhere including Safari 5 and Firefox 5 on OS X.

UPDATE: Fx Quantum (54) has no need for the replace, but Safari 11 is still not happy unless you convert as below

var date_test = new Date("2011-07-14 11:23:00".replace(/-/g,"/"));_x000D_
console.log(date_test);

FIDDLE

At https://github.com/BITPlan/com.bitplan.antlr you'll find an ANTLR java library with some useful helper classes and a few complete examples. It's ready to be used with maven and if you like eclipse and maven.

https://github.com/BITPlan/com.bitplan.antlr/blob/master/src/main/antlr4/com/bitplan/exp/Exp.g4

is a simple Expression language that can do multiply and add operations. https://github.com/BITPlan/com.bitplan.antlr/blob/master/src/test/java/com/bitplan/antlr/TestExpParser.java has the corresponding unit tests for it.

https://github.com/BITPlan/com.bitplan.antlr/blob/master/src/main/antlr4/com/bitplan/iri/IRIParser.g4 is an IRI parser that has been split into the three parts:

1. parser grammar
2. lexer grammar
3. imported LexBasic grammar

https://github.com/BITPlan/com.bitplan.antlr/blob/master/src/test/java/com/bitplan/antlr/TestIRIParser.java has the unit tests for it.

Personally I found this the most tricky part to get right. See http://wiki.bitplan.com/index.php/ANTLR_maven_plugin

https://github.com/BITPlan/com.bitplan.antlr/tree/master/src/main/antlr4/com/bitplan/expr

contains three more examples that have been created for a performance issue of ANTLR4 in an earlier version. In the meantime this issues has been fixed as the testcase https://github.com/BITPlan/com.bitplan.antlr/blob/master/src/test/java/com/bitplan/antlr/TestIssue994.java shows.

Good news everybody! Craigslist has actually released a bulk posting api now!

Enjoy

I think the beginning to the resolution to this issue is the fact that the use of the for loop or any other function or action can not be done in the class definition but needs to be included in a method/constructor/block definition inside of a class.

I tried this in my Angular project and it worked fine without jQuery.

<input type='text' ng-paste='preventPaste($event)'>

And in script part:

$scope.preventPaste = function(e){
   e.preventDefault();
   return false;
};

In non angular project, use 'onPaste' instead of 'ng-paste' and 'event' instesd of '$event'.

You can use this

function LinkCheck(url)
{
    var http = new XMLHttpRequest();
    http.open('HEAD', url, false);
    http.send();
    return http.status!=404;
}

Both lines have the same problem

T newT1 = "some text";
T newT2 = (string)t;

The compiler doesn't know that T is a string and so has no way of knowing how to assign that. But since you checked you can just force it with

T newT1 = "some text" as T;
T newT2 = t; 

you don't need to cast the t since it's already a string, also need to add the constraint

where T : class

Must be used convert, not cast:

SELECT
 CONVERT(varchar(50), N'æøåáälcçcédnoöruýtžš')
 COLLATE Cyrillic_General_CI_AI

(http://blog.sqlpositive.com/2010/03/using-convert-with-collate-to-strip-accents-from-unicode-strings/)

reminder that spring doesn't scan the world , it uses targeted scanning wich means everything under the package where springbootapplication is stored. therefore this error "Consider defining a bean of type 'package' in your configuration [Spring-Boot]" may appear because you have services interfaces in a different springbootapplication package .

Choreographer lets apps to connect themselves to the vsync, and properly time things to improve performance.

Android view animations internally uses Choreographer for the same purpose: to properly time the animations and possibly improve performance.

Since Choreographer is told about every vsync events, it can tell if one of the Runnables passed along by the Choreographer.post* apis doesn't finish in one frame's time, causing frames to be skipped.

In my understanding Choreographer can only detect the frame skipping. It has no way of telling why this happens.

The message "The application may be doing too much work on its main thread." could be misleading.

Revisited in 2015:

<img src="http://imageurl" style="width: auto; height: auto;max-width: 120px;max-height: 100px">

I've revisited it as all common browsers now have working auto suggested by Cherif above, so that works even better as you don't need to know if image is wider than taller.

older version: If you are limited by box of 120x100 for example you can do

<img src="http://image.url" height="100" style="max-width: 120px">

Your code can get messy fast when dealing with CSS3 transitions. I would recommend using a plugin such as jQuery Transit that handles the complexity of CSS3 animations/transitions.

Moreover, the plugin uses webkit-transform rather than webkit-transition, which allows for mobile devices to use hardware acceleration in order to give your web apps that native look and feel when the animations occur.

JS Fiddle Live Demo

Javascript:

$("#startTransition").on("click", function()
{

    if( $(".boxOne").is(":visible")) 
    {
        $(".boxOne").transition({ x: '-100%', opacity: 0.1 }, function () { $(".boxOne").hide(); });
        $(".boxTwo").css({ x: '100%' });
        $(".boxTwo").show().transition({ x: '0%', opacity: 1.0 });
        return;        
    }

    $(".boxTwo").transition({ x: '-100%', opacity: 0.1 }, function () { $(".boxTwo").hide(); });
    $(".boxOne").css({ x: '100%' });
    $(".boxOne").show().transition({ x: '0%', opacity: 1.0 });

});

Most of the hard work of getting cross-browser compatibility is done for you as well and it works like a charm on mobile devices.

You have to iterate through the document childNodes and getting the outerHTML content.

in VBA it looks like this

For Each e In document.ChildNodes
    Put ff, , e.outerHTML & vbCrLf
Next e

using this, allows you to get all elements of the web page including < !DOCTYPE > node if it exists

Depends where you store your crontab:

shell_exec('echo "'. $job .'" >> crontab');

I have changed the code of serge_gubenko and it works better

for (int i = 0; i < dataGrid.Items.Count; i++)
{
    string txt = searchTxt.Text;
    dataGrid.ScrollIntoView(dataGrid.Items[i]);
    DataGridRow row = (DataGridRow)dataGrid.ItemContainerGenerator.ContainerFromIndex(i);
    TextBlock cellContent = dataGrid.Columns[1].GetCellContent(row) as TextBlock;
    if (cellContent != null && cellContent.Text.ToLower().Equals(txt.ToLower()))
    {
        object item = dataGrid.Items[i];
        dataGrid.SelectedItem = item;
        dataGrid.ScrollIntoView(item);
        row.MoveFocus(new TraversalRequest(FocusNavigationDirection.Next));
        break;
    }
}

I'm going to give the short answer since everyone else gave the long one.

You'll get .select and .activate whenever you record macros and reuse them. When you .select a cell or sheet it just makes it active. From that point on whenever you use unqualified references like Range.Value they just use the active cell and sheet. This can also be problematic if you don't watch where your code is placed or a user clicks on the workbook.

So, you can eliminate these issues by directly referencing your cells. Which goes:

'create and set a range
Dim Rng As Excel.Range
Set Rng = Workbooks("Book1").Worksheets("Sheet1").Range("A1")
'OR
Set Rng = Workbooks(1).Worksheets(1).Cells(1, 1)

Or you could

'Just deal with the cell directly rather than creating a range
'I want to put the string "Hello" in Range A1 of sheet 1
Workbooks("Book1").Worksheets("Sheet1").Range("A1").value = "Hello"
'OR
Workbooks(1).Worksheets(1).Cells(1, 1).value = "Hello"

There are various combinations of these methods, but that would be the general idea expressed as shortly as possible for impatient people like me.

Correct rounding is likely desired.

Therefore math.Round() is your quick(!) friend. Approaches with fmt.Sprintf and strconv.Atois() were 2 orders of magnitude slower according to my tests with a matrix of float64 values that were intended to become correctly rounded int values.

package main
import (
    "fmt"
    "math"
)
func main() {
    var x float64 = 5.51
    var y float64 = 5.50
    var z float64 = 5.49
    fmt.Println(int(math.Round(x)))  // outputs "6"
    fmt.Println(int(math.Round(y)))  // outputs "6"
    fmt.Println(int(math.Round(z)))  // outputs "5"
}

math.Round() does return a float64 value but with int() applied afterwards, I couldn't find any mismatches so far.

At, i think Angular 8:

ActivatedRoute.params has been replaced by ActivatedRoute.paramMap ActivatedRoute.queryParams has been replaced by ActivatedRoute.queryParamMap

You could initialize them to None.

Try to check the length of the selector, if it returns you something then the element must exists else not.

if( $('#selector').length )         // use this if you are using id to check
{
     // it exists
}


if( $('.selector').length )         // use this if you are using class to check
{
     // it exists
}

Use the first if condition for id and the 2nd one for class.

For Windows users:

To add onto @CoderSpeed's answer above (CoderSpeed's answer). Create a batch file (.bat) with the commands you would usually enter on the CLI, e.g.:

cd "C:\Program Files\MongoDB\Server\4.0\bin" mongod.exe

Windows Script Host’s Run Method allows you run a program or script in invisible mode. Here is a sample Windows script code that launches a batch file named syncfiles.bat invisibly.

Let’s say we have a file named syncfiles.bat in C:\Batch Files directory. Let’s launch it in hidden mode using Windows Scripting.

Copy the following lines to Notepad.

Set WshShell = CreateObject("WScript.Shell") WshShell.Run chr(34) & "C:\Batch Files\syncfiles.bat" & Chr(34), 0 Set WshShell = Nothing

Note: Replace the batch file name/path accordingly in the script according to your requirement. Save the file with .VBS extension, say launch_bat.vbs Edit the .BAT file name and path accordingly, and save the file. Double-click to run the launch_bat.vbs file, which in-turn launches the batch file syncfiles.bat invisibly.

Sourced from: Run .BAT files invisibly

$_SERVER['REMOTE_ADDR'] may not actually contain real client IP addresses, as it will give you a proxy address for clients connected through a proxy, for example. That may well be what you really want, though, depending what your doing with the IPs. Someone's private RFC1918 address may not do you any good if you're say, trying to see where your traffic is originating from, or remembering what IP the user last connected from, where the public IP of the proxy or NAT gateway might be the more appropriate to store.

There are several HTTP headers like X-Forwarded-For which may or may not be set by various proxies. The problem is that those are merely HTTP headers which can be set by anyone. There's no guarantee about their content. $_SERVER['REMOTE_ADDR'] is the actual physical IP address that the web server received the connection from and that the response will be sent to. Anything else is just arbitrary and voluntary information. There's only one scenario in which you can trust this information: you are controlling the proxy that sets this header. Meaning only if you know 100% where and how the header was set should you heed it for anything of importance.

Having said that, here's some sample code:

if (!empty($_SERVER['HTTP_CLIENT_IP'])) {
    $ip = $_SERVER['HTTP_CLIENT_IP'];
} elseif (!empty($_SERVER['HTTP_X_FORWARDED_FOR'])) {
    $ip = $_SERVER['HTTP_X_FORWARDED_FOR'];
} else {
    $ip = $_SERVER['REMOTE_ADDR'];
}

Editor's note: Using the above code has security implications. The client can set all HTTP header information (ie. $_SERVER['HTTP_...) to any arbitrary value it wants. As such it's far more reliable to use $_SERVER['REMOTE_ADDR'], as this cannot be set by the user.

From: http://roshanbh.com.np/2007/12/getting-real-ip-address-in-php.html

If you have a .css file which you don't wish to modify, neither change its extension to .scss (e.g. this file is from a forked project you don't maintain), you can always create a symlink and then import it into your .scss.

Creates a symlink:

ln -s path/to/css/file.css path/to/sass/files/_file.scss

Imports symlink file into a target .scss:

@import "path/to/sass/files/file";

Your target output .css file is going to hold contents from imported symlink .scss file, not a CSS import rule (mentioned by @yaz with highest comment votes). And you don't have duplicated files with different extensions, what means any update made inside initial .css file immediately gets imported into your target output.

Symbolic link (also symlink or soft link) is a special type of file that contains a reference to another file in the form of an absolute or relative path and that affects pathname resolution.
– http://en.wikipedia.org/wiki/Symbolic_link

You can put the data in a file and re-direct it like this:

$ cat file.sh
#!/bin/bash

read x
read y
echo $x
echo $y

Data for the script:

$ cat data.txt
2
3

Executing the script:

$ file.sh < data.txt
2
3

You could do something like this.

# Create temporary branch for your detached head
git branch tmp

# Go to master
git checkout master

# Merge in commits from previously detached head
git merge tmp

# Delete temporary branch
git branch -d tmp

Even simpler would be

git checkout master
git merge HEAD@{1}

but this has the slight danger that if you do make a mistake it can be a little harder to recover the commits made on the detached head.

Ok, this is actually four different question. I'll address them one by one:

are both equals for the compiler? (speed, perf...)

Yes. The pointer dereferenciation and decay from type int (*)[100][280] to int (*)[280] is always a noop to your CPU. I wouldn't put it past a bad compiler to generate bogus code anyways, but a good optimizing compiler should compile both examples to the exact same code.

is one of these solutions eating more memory than the other?

As a corollary to my first answer, no.

what is the more frequently used by developers?

Definitely the variant without the extra (*pointer) dereferenciation. For C programmers it is second nature to assume that any pointer may actually be a pointer to the first element of an array.

what is the best way, the 1st or the 2nd?

That depends on what you optimize for:

• Idiomatic code uses variant 1. The declaration is missing the outer dimension, but all uses are exactly as a C programmer expects them to be.

• If you want to make it explicit that you are pointing to an array, you can use variant 2. However, many seasoned C programmers will think that there's a third dimension hidden behind the innermost *. Having no array dimension there will feel weird to most programmers.

You can do it using -v (for --invert-match) option of grep as:

grep -v "unwanted_word" file | grep XXXXXXXX

grep -v "unwanted_word" file will filter the lines that have the unwanted_word and grep XXXXXXXX will list only lines with pattern XXXXXXXX.

EDIT:

From your comment it looks like you want to list all lines without the unwanted_word. In that case all you need is:

grep -v 'unwanted_word' file

You could Node's util.inspect(object) to print out object's structure.

It is especially helpful when your object has circular dependencies e.g.

$ node

var obj = {
   "name" : "John",
   "surname" : "Doe"
}
obj.self_ref = obj;

util = require("util");

var obj_str = util.inspect(obj);
console.log(obj_str);
// prints { name: 'John', surname: 'Doe', self_ref: [Circular] }

It that case JSON.stringify throws exception: TypeError: Converting circular structure to JSON

Sounds like you're just trying to do a classic two-column lookup. http://www.dailydoseofexcel.com/archives/2009/04/21/vlookup-on-two-columns/

Tons of solutions for this, most simple is probably the following (which doesn't require an array formula):

=SUMPRODUCT((Lookup!A:A=Param!A1)*(Lookup!B:B=Param!B1)*(Lookup!C:C))

To translate your specific example, you would use:

=SUMPRODUCT((A1:A3=A2)*(B1:B3="B")*(C1:C3))

Any changes you commit, like deleting all your project files, will still be in place after a pull. All a pull does is merge the latest changes from somewhere else into your own branch, and if your branch has deleted everything, then at best you'll get merge conflicts when upstream changes affect files you've deleted. So, in short, yes everything is up to date.

If you describe what outcome you'd like to have instead of "all files deleted", maybe someone can suggest an appropriate course of action.

Update:

GET THE MOST RECENT OF THE CODE ON MY SYSTEM

What you don't seem to understand is that you already have the most recent code, which is yours. If what you really want is to see the most recent of someone else's work that's on the master branch, just do:

git fetch upstream
git checkout upstream/master

Note that this won't leave you in a position to immediately (re)start your own work. If you need to know how to undo something you've done or otherwise revert changes you or someone else have made, then please provide details. Also, consider reading up on what version control is for, since you seem to misunderstand its basic purpose.

Straightforward and easy solution is:

docker build .
=> ....
=> Successfully built a3e628814c67
docker run -p 3000:3000 a3e628814c67

3000 - can be any port

a3e628814c68 - hash result given by success build command

NOTE: you should be within directory that contains Dockerfile.

Consider the following code:

error_reporting(E_STRICT);
class test {
    function test_arr(&$a) {
        var_dump($a);
    }
    function get_arr() {
        return array(1, 2);
    }
}

$t = new test;
$t->test_arr($t->get_arr());

This will generate the following output:

Strict Standards: Only variables should be passed by reference in `test.php` on line 14
array(2) {
  [0]=>
  int(1)
  [1]=>
  int(2)
}

The reason? The test::get_arr() method is not a variable and under strict mode this will generate a warning. This behavior is extremely non-intuitive as the get_arr() method returns an array value.

To get around this error in strict mode, either change the signature of the method so it doesn't use a reference:

function test_arr($a) {
    var_dump($a);
}

Since you can't change the signature of array_shift you can also use an intermediate variable:

$inter = get_arr();
$el = array_shift($inter);

Guess you just missed the find method in the docs:

my_array.find {|e| e.satisfies_condition? }

Functional Approach for ES6+

If you want to take a more functional approach to iterating over the Map object, you can do something like this

const myMap = new Map() 
myMap.forEach((value, key) => {
    console.log(value, key)
})

Here is the official documentation of ArrayList.get().

Anyway it is very simple, for example

ArrayList list = new ArrayList();
list.add("1");
list.add("2");
list.add("3");
String str = (String) list.get(0); // here you get "1" in str

import csv

with open('filepath/filename.csv', "rt", encoding='ascii') as infile:
    read = csv.reader(infile)
    for row in read :
        print (row)

This will solve your problem. Don't forget to give the encoding.

Your example code is wrong and will throw a SyntaxError. You seem to have confused the syntax of creating an object Object with creating an Array.

The correct syntax would be: var arr = [ "abc", "def", "ghi" ];

To remove an item from the array, based on its value, use the splice method:

arr.splice(arr.indexOf("def"), 1);

To remove it by index, just refer directly to it:

arr.splice(1, 1);

On a 64-bit system you have to make sure that both the Tomcat application and the JDK are the same architecture: either both are x86 or x64.

In case you want to change the Tomcat instance to x64 you might have to download the tomcat8.exe or tomcat9.exe and the tcnative-1.dll with the appropriate x64 versions. You can get those at http://svn.apache.org/viewvc/tomcat/.

Alternatively you can point Tomcat to the x86 JDK by changing the Java Virtual Machine path in the Tomcat config.

I created copy of my inet folder, to make a duplicate of the site. It showed 'access denied .../App_Data/viewstate/1/6/6/0 ... '. On checking it showed that app_data folder is having IIS_IUSER addes but does not have modify or write acess checked. Just check those boxes and the instance begin to run.

The Bootstrap team seems to have removed it. See here: https://github.com/twbs/bootstrap/issues/8922 . @Skelly's answer involves custom css which I didn't want to do so I used the grid system and nav-pills. It worked fine and looked great. The code looks like so:

<div class="row">

  <!-- Navigation Buttons -->
  <div class="col-md-3">
    <ul class="nav nav-pills nav-stacked" id="myTabs">
      <li class="active"><a href="#home" data-toggle="pill">Home</a></li>
      <li><a href="#profile" data-toggle="pill">Profile</a></li>
      <li><a href="#messages" data-toggle="pill">Messages</a></li>
    </ul>
  </div>

  <!-- Content -->
  <div class="col-md-9">
    <div class="tab-content">
      <div class="tab-pane active" id="home">Home</div>
      <div class="tab-pane" id="profile">Profile</div>
      <div class="tab-pane" id="messages">Messages</div>
    </div>
  </div>

</div>

You can see this in action here: http://bootply.com/81948

[Update] @SeanK gives the option of not having to enable the nav-pills through Javascript and instead using data-toggle="pill". Check it out here: http://bootply.com/96067. Thanks Sean.

I know this is an old question, but CMS's answer seems to have one tiny little flaw: it only works if currency format uses "." as decimal separator. For example, if you need to work with russian rubles, the string will look like this: "1 000,00 rub."

My solution is far less elegant than CMS's, but it should do the trick.

var currency = "1 000,00 rub."; //it works for US-style currency strings as well_x000D_
var cur_re = /\D*(\d+|\d.*?\d)(?:\D+(\d{2}))?\D*$/;_x000D_
var parts = cur_re.exec(currency);_x000D_
var number = parseFloat(parts[1].replace(/\D/,'')+'.'+(parts[2]?parts[2]:'00'));_x000D_
console.log(number.toFixed(2));

Assumptions:

• currency value uses decimal notation
• there are no digits in the string that are not a part of the currency value
• currency value contains either 0 or 2 digits in its fractional part *

The regexp can even handle something like "1,999 dollars and 99 cents", though it isn't an intended feature and it should not be relied upon.

Hope this will help someone.

Using

System.ComponentModel.DataAnnotations;

You can simply put that attribute in your model :

[DataType("decimal(18,5)")]

This error can happen because some MFC library (eg. mfc120.dll) from which the DLL is dependent is missing in windows/system32 folder.

This post really helped me to finally get what I want. So I just wanted to contribute my code here to help others. Here is my code with some explanation.

The following code:

double moneyWithDecimals = 5.50;
double moneyNoDecimals = 5.00;
System.out.println(jeroensFormat(moneyWithDecimals));
System.out.println(jeroensFormat(moneyNoDecimals));

Will return:

€ 5,-
€ 5,50

The actual jeroensFormat() method:

public String jeroensFormat(double money)//Wants to receive value of type double
{
        NumberFormat dutchFormat = NumberFormat.getCurrencyInstance();
        money = money;
        String twoDecimals = dutchFormat.format(money); //Format to string
        if(tweeDecimalen.matches(".*[.]...[,]00$")){
            String zeroDecimals = twoDecimals.substring(0, twoDecimals.length() -3);
                return zeroDecimals;
        }
        if(twoDecimals.endsWith(",00")){
            String zeroDecimals = String.format("€ %.0f,-", money);
            return zeroDecimals; //Return with ,00 replaced to ,-
        }
        else{ //If endsWith != ,00 the actual twoDecimals string can be returned
            return twoDecimals;
        }
}

The method displayJeroensFormat that calls the method jeroensFormat()

    public void displayJeroensFormat()//@parameter double:
    {
        System.out.println(jeroensFormat(10.5)); //Example for two decimals
        System.out.println(jeroensFormat(10.95)); //Example for two decimals
        System.out.println(jeroensFormat(10.00)); //Example for zero decimals
        System.out.println(jeroensFormat(100.000)); //Example for zero decimals
    }

Will have the following output:

€ 10,50
€ 10,95
€ 10,-
€ 100.000 (In Holland numbers bigger than € 999,- and wit no decimals don't have ,-)

This code uses your current currency. In my case that's Holland so the formatted string for me will be different than for someone in the US.

• Holland: 999.999,99
• US: 999,999.99

Just watch the last 3 characters of those numbers. My code has an if statement to check if the last 3 characters are equal to ",00". To use this in the US you might have to change that to ".00" if it doesn't work already.