SQLMenace said money is inexact. But you don't multiply/divide money by money! How much is 3 dollars times 50 cents? 150 dollarcents? You multiply/divide money by scalars, which should be decimal.

DECLARE
@mon1 MONEY,
@mon4 MONEY,
@num1 DECIMAL(19,4),
@num2 DECIMAL(19,4),
@num3 DECIMAL(19,4),
@num4 DECIMAL(19,4)

SELECT
@mon1 = 100,
@num1 = 100, @num2 = 339, @num3 = 10000

SET @mon4 = @mon1/@num2*@num3
SET @num4 = @num1/@num2*@num3

SELECT @mon4 AS moneyresult,
@num4 AS numericresult

Results in the correct result:

moneyresult           numericresult
--------------------- ---------------------------------------
2949.8525             2949.8525

money is good as long as you don't need more than 4 decimal digits, and you make sure your scalars - which do not represent money - are decimals.

You can simply use:

mvn --settings YourOwnSettings.xml clean install

or

mvn -s YourOwnSettings.xml clean install

Please also remember that ||= isn't an atomic operation and so, it isn't thread safe. As rule of thumb, don't use it for class methods.

Git Fetch

You download changes to your local branch from origin through fetch. Fetch asks the remote repo for all commits that others have made but you don't have on your local repo. Fetch downloads these commits and adds them to the local repository.

Git Merge

You can apply changes downloaded through fetch using the merge command. Merge will take the commits retrieved from fetch and try to add them to your local branch. The merge will keep the commit history of your local changes so that when you share your branch with push, Git will know how others can merge your changes.

Git Pull

Fetch and merge run together often enough that a command that combines the two, pull, was created. Pull does a fetch and then a merge to add the downloaded commits into your local branch.

You don't need --header "Content-Length: $LENGTH".

curl --request POST --data-binary "@template_entry.xml" $URL

Note that GET request does not support content body widely.

Also remember that POST request have 2 different coding schema. This is first form:

  $ nc -l -p 6666 &
  $ curl  --request POST --data-binary "@README" http://localhost:6666

POST / HTTP/1.1
User-Agent: curl/7.21.0 (x86_64-pc-linux-gnu) libcurl/7.21.0 OpenSSL/0.9.8o zlib/1.2.3.4 libidn/1.15 libssh2/1.2.6
Host: localhost:6666
Accept: */*
Content-Length: 9309
Content-Type: application/x-www-form-urlencoded
Expect: 100-continue

.. -*- mode: rst; coding: cp1251; fill-column: 80 -*-
.. rst2html.py README README.html
.. contents::

You probably request this:

-F/--form name=content
           (HTTP) This lets curl emulate a filled-in form in
              which a user has pressed the submit button. This
              causes curl to POST data using the Content- Type
              multipart/form-data according to RFC2388. This
              enables uploading of binary files etc. To force the
              'content' part to be a file, prefix the file name
              with an @ sign. To just get the content part from a
              file, prefix the file name with the symbol <. The
              difference between @ and < is then that @ makes a
              file get attached in the post as a file upload,
              while the < makes a text field and just get the
              contents for that text field from a file.

Make sure to enable the use of shortcodes in text widgets.

// To enable the use, add this in your *functions.php* file:
add_filter( 'widget_text', 'do_shortcode' );

// and then you can use it in any PHP file:  
<?php echo do_shortcode('[YOUR-SHORTCODE-NAME/TAG]'); ?>

Check the documentation for more.

I was trying to create a web application with spring boot and I got the same error. After inspecting I found that I was missing a dependency. So, be sure to add following dependency to your pom.xml file.

    <dependency>
        <groupId>org.springframework.boot</groupId>
        <artifactId>spring-boot-starter-web</artifactId>
    </dependency> 

In Android Studio 1.0 - 1.1b4, I found this to be the easiest way to remove a module:

1. Open settings.gradle found under Gradle Scripts

2. Delete module's name from the include statement

3. Sync Project with Gradle Files

4. Optionally, delete it manually from the project folder

Example

Old:

include ':app', ':greendao'

New:

include ':app'

You can't do it without a full CSV parser.

Use regular expression:

String s="your1string2contain3with4number";
int i=Integer.parseInt(s.replaceAll("[\\D]", ""))

output: i=1234;

If you need first number combination then you should try below code:

String s="abc123xyz456";
int i=((Number)NumberFormat.getInstance().parse(s)).intValue()

output: i=123;

Subquery giving dates. We are not linking with the model. So below query solves the problem.

If there are duplicate dates/model can be avoided by the following query.

select t.model, t.date
from doc t
inner join (select model, max(date) as MaxDate from doc  group by model)
tm on t.model = tm.model and t.date = tm.MaxDate

In My Aws Windows I Solved it and steps are

1. Open "C:\ProgramData\MySQL\MySQL Server 8.0"
2. Open My.ini
3. Find "[mysql]"
4. After "no-beep=" Brake Line and insert "default-character-set=utf8"
5. Find "[mysqld]"
6. Insert "collation-server = utf8_unicode_ci"
7. Insert "character-set-server = utf8"

example

...
# socket=MYSQL

port=3306

[mysql]
no-beep=
default-character-set=utf8
# default-character-set=

# SERVER SECTION
# ----------------------------------------------------------------------
# 
# The following options will be read by the MySQL Server. Make sure that
# you have installed the server correctly (see above) so it reads this 
# file.=
# 
# server_type=2
[mysqld]

collation-server = utf8_unicode_ci
character-set-server = utf8
# The next three options are mutually exclusive to SERVER_PORT below.
# skip-networking=
# enable-named-pipe=
# shared-memory=
...

* UPDATE *

I figured the best way to run some commands is to write a custom Dockerfile that does everything I want before the official CMD is ran from the image.

docker-compose.yaml:

version: '3'

# Can be used as an alternative to VBox/Vagrant
services:

  mongo:
    container_name: mongo
    image: mongo
    build:
      context: .
      dockerfile: deploy/local/Dockerfile.mongo
    ports:
      - "27017:27017"
    volumes:
      - ../.data/mongodb:/data/db

Dockerfile.mongo:

FROM mongo:3.2.12

RUN mkdir -p /fixtures

COPY ./fixtures /fixtures

RUN (mongod --fork --syslog && \
     mongoimport --db wcm-local --collection clients --file /fixtures/clients.json && \
     mongoimport --db wcm-local --collection configs --file /fixtures/configs.json && \
     mongoimport --db wcm-local --collection content --file /fixtures/content.json && \
     mongoimport --db wcm-local --collection licenses --file /fixtures/licenses.json && \
     mongoimport --db wcm-local --collection lists --file /fixtures/lists.json && \
     mongoimport --db wcm-local --collection properties --file /fixtures/properties.json && \
     mongoimport --db wcm-local --collection videos --file /fixtures/videos.json)

This is probably the cleanest way to do it.

* OLD WAY *

I created a shell script with my commands. In this case I wanted to start mongod, and run mongoimport but calling mongod blocks you from running the rest.

docker-compose.yaml:

version: '3'

services:
  mongo:
    container_name: mongo
    image: mongo:3.2.12
    ports:
      - "27017:27017"
    volumes:
      - ./fixtures:/fixtures
      - ./deploy:/deploy
      - ../.data/mongodb:/data/db
    command: sh /deploy/local/start_mongod.sh

start_mongod.sh:

mongod --fork --syslog && \
mongoimport --db wcm-local --collection clients --file /fixtures/clients.json && \
mongoimport --db wcm-local --collection configs --file /fixtures/configs.json && \
mongoimport --db wcm-local --collection content --file /fixtures/content.json && \
mongoimport --db wcm-local --collection licenses --file /fixtures/licenses.json && \
mongoimport --db wcm-local --collection lists --file /fixtures/lists.json && \
mongoimport --db wcm-local --collection properties --file /fixtures/properties.json && \
mongoimport --db wcm-local --collection videos --file /fixtures/videos.json && \
pkill -f mongod && \
sleep 2 && \
mongod

So this forks mongo, does monogimport and then kills the forked mongo which is detached, and starts it up again without detaching. Not sure if there is a way to attach to a forked process but this does work.

NOTE: If you strictly want to load some initial db data this is the way to do it:

mongo_import.sh

#!/bin/bash
# Import from fixtures

# Used in build and docker-compose mongo (different dirs)
DIRECTORY=../deploy/local/mongo_fixtures
if [[ -d "/fixtures" ]]; then
    DIRECTORY=/fixtures
fi
echo ${DIRECTORY}

mongoimport --db wcm-local --collection clients --file ${DIRECTORY}/clients.json && \
mongoimport --db wcm-local --collection configs --file ${DIRECTORY}/configs.json && \
mongoimport --db wcm-local --collection content --file ${DIRECTORY}/content.json && \
mongoimport --db wcm-local --collection licenses --file ${DIRECTORY}/licenses.json && \
mongoimport --db wcm-local --collection lists --file ${DIRECTORY}/lists.json && \
mongoimport --db wcm-local --collection properties --file ${DIRECTORY}/properties.json && \
mongoimport --db wcm-local --collection videos --file ${DIRECTORY}/videos.json

mongo_fixtures/*.json files were created via mongoexport command.

docker-compose.yaml

version: '3'

services:
  mongo:
    container_name: mongo
    image: mongo:3.2.12
    ports:
      - "27017:27017"
    volumes:
      - mongo-data:/data/db:cached
      - ./deploy/local/mongo_fixtures:/fixtures
      - ./deploy/local/mongo_import.sh:/docker-entrypoint-initdb.d/mongo_import.sh


volumes:
  mongo-data:
    driver: local

It works; just thought this would be helpful to someone in the future.

If you are working with MAMP, as a security measure, the $cfg['Servers'][$i]['AllowNoPassword'] = true; usually will be missing in the config.inc.php file so if you want to use phpMyAdmin without a password for root then simply add it preferably after the $cfg['Servers'][$i]['AllowDeny']['rules'] = array(); statement.

Then Restart your server just to be sure and you will be good to go.

I also like to build locators from up to bottom like:

//div[contains(@class,'btn-group')][./button[contains(.,'Arcade Reader')]]/button[@name='settings']

It's pretty simple, as we just search btn-group with button[contains(.,'Arcade Reader')] and get it's button[@name='settings']

That's just another option to build xPath locators

What is the profit of searching wrapper element: you can return it by method (example in java) and just build selenium constructions like:

getGroupByName("Arcade Reader").find("button[name='settings']");
getGroupByName("Arcade Reader").find("button[name='delete']");

or even simplify more

getGroupButton("Arcade Reader", "delete").click();

If you are using the batch conversion, in the window click "options" in the "Batch conversion settings-output format" and tick the two boxes "save transparent color" (one under "PNG" and the other under "ICO").

np.max is just an alias for np.amax. This function only works on a single input array and finds the value of maximum element in that entire array (returning a scalar). Alternatively, it takes an axis argument and will find the maximum value along an axis of the input array (returning a new array).

>>> a = np.array([[0, 1, 6],
                  [2, 4, 1]])
>>> np.max(a)
6
>>> np.max(a, axis=0) # max of each column
array([2, 4, 6])

The default behaviour of np.maximum is to take two arrays and compute their element-wise maximum. Here, 'compatible' means that one array can be broadcast to the other. For example:

>>> b = np.array([3, 6, 1])
>>> c = np.array([4, 2, 9])
>>> np.maximum(b, c)
array([4, 6, 9])

But np.maximum is also a universal function which means that it has other features and methods which come in useful when working with multidimensional arrays. For example you can compute the cumulative maximum over an array (or a particular axis of the array):

>>> d = np.array([2, 0, 3, -4, -2, 7, 9])
>>> np.maximum.accumulate(d)
array([2, 2, 3, 3, 3, 7, 9])

This is not possible with np.max.

You can make np.maximum imitate np.max to a certain extent when using np.maximum.reduce:

>>> np.maximum.reduce(d)
9
>>> np.max(d)
9

Basic testing suggests the two approaches are comparable in performance; and they should be, as np.max() actually calls np.maximum.reduce to do the computation.

We encountered this issue on a Tomcat running from a jre directory that was (almost fully) removed after an automatic jre update, so that the running jre could no longer find jre.../lib/security/cacerts because it no longer existed.

Restarting Tomcat (after changing the configuration to run from the different jre location) fixed the problem.

If you want to update / add single style in DOM Element style attribute you can use this function:

function setCssTextStyle(el, style, value) {
  var result = el.style.cssText.match(new RegExp("(?:[;\\s]|^)(" +
      style.replace("-", "\\-") + "\\s*:(.*?)(;|$))")),
    idx;
  if (result) {
    idx = result.index + result[0].indexOf(result[1]);
    el.style.cssText = el.style.cssText.substring(0, idx) +
      style + ": " + value + ";" +
      el.style.cssText.substring(idx + result[1].length);
  } else {
    el.style.cssText += " " + style + ": " + value + ";";
  }
}

style.cssText is supported for all major browsers.

Use case example:

var elem = document.getElementById("elementId");
setCssTextStyle(elem, "margin-top", "10px !important");

Here is link to demo

I am not expert, but this may work as well,

dat <- dat[2:nrow(dat), ]

setTimeout( function ( ) { alert( "moo" ); }, 10000 ); //displays msg in 10 seconds

I saw next comment about this

It's also helpful to place the badge inline if you want to apply your own CSS to it. But do remember that you agreed to show Google's Terms and conditions when you registered for an API key - so don't hide it, please. And while it is possible to make the badge disappear completely with CSS, we wouldn't recommend it.

Yes it is correct in Java there are several steps to make an array of objects:

1. Declaring and then Instantiating (Create memory to store '4' objects):

   A[ ] arr = new A[4];
   

2. Initializing the Objects (In this case you can Initialize 4 objects of class A)

   arr[0] = new A();
   arr[1] = new A();
   arr[2] = new A();
   arr[3] = new A();
   

   or

   for( int i=0; i<4; i++ )
     arr[i] = new A();
   

Now you can start calling existing methods from the objects you just made etc.

For example:

  int x = arr[1].getNumber();

or

  arr[1].setNumber(x);

Use the to_datetime function, specifying a format to match your data.

raw_data['Mycol'] =  pd.to_datetime(raw_data['Mycol'], format='%d%b%Y:%H:%M:%S.%f')

From a Microsoft's script:

DECLARE @dbname nvarchar(128)
SET @dbname = N'Senna'

IF (EXISTS (SELECT name 
FROM master.dbo.sysdatabases 
WHERE ('[' + name + ']' = @dbname 
OR name = @dbname)))

-- code mine :)
PRINT 'db exists'

There are some easy steps to make Dump file of your Tables,Users and Procedures:

Goto sqlplus or any sql*plus connect by your username or password

1. Now type host it looks like SQL>host.
2. Now type "exp" means export.
3. It ask u for username and password give the username and password of that user of which you want to make a dump file.
4. Now press Enter.
5. Now option blinks for Export file: EXPDAT.DMP>_ (Give a path and file name to where you want to make a dump file e.g e:\FILENAME.dmp) and the press enter
6. Select the option "Entire Database" or "Tables" or "Users" then press Enter
7. Again press Enter 2 more times table data and compress extent
8. Enter the name of table like i want to make dmp file of table student existing so type student and press Enter
9. Enter to quit now your file at your given path is dump file now import that dmp file to get all the table data.

You can see the difference with the following example:

<a href="http://www.google.co.uk/" onclick="return (confirm('Follow this link?'))">Google</a>

Clicking "Okay" returns true, and the link is followed. Clicking "Cancel" returns false and doesn't follow the link. If javascript is disabled the link is followed normally.

The first one is the correct one, and IMHO the more efficient one, since the second 'solution' instantiates a new string instance.

You are declaring a local variable, not a class variable. To set an instance variable (attribute), use

class Example(object):
    def the_example(self):
        self.itsProblem = "problem"  # <-- remember the 'self.'

theExample = Example()
theExample.the_example()
print(theExample.itsProblem)

To set a class variable (a.k.a. static member), use

class Example(object):
    def the_example(self):
        Example.itsProblem = "problem"
        # or, type(self).itsProblem = "problem"
        # depending what you want to do when the class is derived.

As of the latest Bootstrap (3.1.x), the way to achieve a fluid layout it to use .container-fluid class.

See Bootstrap grid for reference

This worked for me. Simplest solution by far.

If you are using GitHub for Windows and getting this error, the problem might be that you are trying to run the command in the wrong shell or mode. If you are trying to do git push origin master in the regular command prompt or PowerShell, this is the problem.

You need to do it in a git shell. Simply open Github for Windows, right click, and select "Open Shell Here". It looks like a regular PowerShell window, but it's not, which makes it really confusing for newbies to git, like myself.

I hope others find this useful.

#if !defined(MANUF) || !defined(SERIAL) || !defined(MODEL)

You can try this:-

string values = "";
foreach(ListItem item in myCBL.Items){
if(item.Selected)
{
values += item.Value.ToString() + ",";  
}
}
values = values.TrimEnd(',');  //To eliminate comma in last.

The tail program can do this:

ls -lart | tail -n +2

The -n +2 means “start passing through on the second line of output”.

A good seed generation for me is:

Random rand = new Random(Guid.NewGuid().GetHashCode());

It is very random. The seed is always different because the seed is also random generated.

from IPython.display import HTML

HTML('''<script>
code_show=true; 
function code_toggle() {
 if (code_show){
 $('div.input').hide();
 } else {
 $('div.input').show();
 }
 code_show = !code_show
} 
$( document ).ready(code_toggle);
</script>
<form action="javascript:code_toggle()"><input type="submit" value="Click here to toggle on/off the raw code."></form>''')

UPDATE a
SET a.column1 = b.column2
FROM myTable a 
INNER JOIN myTable b
on a.myID = b.myID

in order for both "a" and "b" to work, both aliases must be defined

Just reorder or make sure, the (DOM or HTML) is loaded before the JavaScript.

Yes, this is possible. One of the main pros for using Swing is the ease with which the abstract controls can be created and manipulates.

Here is a quick and dirty way to extend the existing JButton class to draw a circle to the right of the text.

package test;

import java.awt.Color;
import java.awt.Container;
import java.awt.Dimension;
import java.awt.FlowLayout;
import java.awt.Graphics;

import javax.swing.JButton;
import javax.swing.JFrame;

public class MyButton extends JButton {

    private static final long serialVersionUID = 1L;

    private Color circleColor = Color.BLACK;

    public MyButton(String label) {
        super(label);
    }

    @Override
    protected void paintComponent(Graphics g) {
        super.paintComponent(g);

        Dimension originalSize = super.getPreferredSize();
        int gap = (int) (originalSize.height * 0.2);
        int x = originalSize.width + gap;
        int y = gap;
        int diameter = originalSize.height - (gap * 2);

        g.setColor(circleColor);
        g.fillOval(x, y, diameter, diameter);
    }

    @Override
    public Dimension getPreferredSize() {
        Dimension size = super.getPreferredSize();
        size.width += size.height;
        return size;
    }

    /*Test the button*/
    public static void main(String[] args) {
        MyButton button = new MyButton("Hello, World!");

        JFrame frame = new JFrame();
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        frame.setSize(400, 400);

        Container contentPane = frame.getContentPane();
        contentPane.setLayout(new FlowLayout());
        contentPane.add(button);

        frame.setVisible(true);
    }

}

Note that by overriding paintComponent that the contents of the button can be changed, but that the border is painted by the paintBorder method. The getPreferredSize method also needs to be managed in order to dynamically support changes to the content. Care needs to be taken when measuring font metrics and image dimensions.

For creating a control that you can rely on, the above code is not the correct approach. Dimensions and colours are dynamic in Swing and are dependent on the look and feel being used. Even the default Metal look has changed across JRE versions. It would be better to implement AbstractButton and conform to the guidelines set out by the Swing API. A good starting point is to look at the javax.swing.LookAndFeel and javax.swing.UIManager classes.

http://docs.oracle.com/javase/8/docs/api/javax/swing/LookAndFeel.html

http://docs.oracle.com/javase/8/docs/api/javax/swing/UIManager.html

Understanding the anatomy of LookAndFeel is useful for writing controls: Creating a Custom Look and Feel

None of the above worked for me - the problem lay in my Sourcetree Preferences. In the Network tab, I had a setting there for 'Default usernames for URLs which do not include one:'. The username was incorrect where I had entered it incorrectly previously - I had set it to my email rather than username. I highlighted the entries and clicked Remove for both. Then I returned to my repository page and clicked Push again. On pushing, it asked me for full username and password, which I was able to enter correctly - the push then finally worked.

It seems that ARM64 was created by Apple and AARCH64 by the others, most notably GNU/GCC guys.

After some googling I found this link:

The LLVM 64-bit ARM64/AArch64 Back-Ends Have Merged

So it makes sense, iPad calls itself ARM64, as Apple is using LLVM, and Edge uses AARCH64, as Android is using GNU GCC toolchain.

As mentioned, the difference is primarily the size of the underlying variables, which in each case get larger to allow more characters to be represented.

However, fonts, encoding and things are wickedly complicated (unnecessarily?), so a big link is needed to fill in more detail:

http://www.cs.tut.fi/~jkorpela/chars.html#ascii

Don't expect to understand it all, but if you don't want to have problems later it's worth learning as much as you can, as early as you can (or just getting someone else to sort it out for you).

Paul.

Sheet.getPhysicalNumberOfRows() does not involve some empty rows. If you want to loop for all rows, do not use this to know the loop size.

First off, Xvfb doesn't read configuration from xorg.conf. Xvfb is a variant of the KDrive X servers and like all members of that family gets its configuration from the command line.

It is true that XRandR and Xinerama are mutually exclusive, but in the case of Xvfb there's no Xinerama in the first place. You can enable the XRandR extension by starting Xvfb using at least the following command line options

Xvfb +extension RANDR [further options]

try to replace the text/javascript to text/html then save the note and reload browser then bring it back to text/javascript.. I don't know but for unknown reason this one works with me.. I am searching and copy-pasting and I just accidentally undo what I am typing then boom kablooey it worked 0.O by the way I am just noob.. sorry I just thought it could help though..

I've the same problem in a win 2008 IIS server, I've solved the problem adding this configuration in the web.config:

<system.web>
    <httpRuntime executionTimeout="3600" maxRequestLength="102400" 
     appRequestQueueLimit="100" requestValidationMode="2.0"
     requestLengthDiskThreshold="10024000"/>
</system.web>

The requestLengthDiskThreshold by default is 80000 bytes so it's too small for my application. requestLengthDiskThreshold is measured in bytes and maxRequestLength is expressed in Kbytes.

The problem is present if the application is using a System.Web.UI.HtmlControls.HtmlInputFile server component. Increasing the requestLengthDiskThreshold is necessary to solve it.

From my understanding, size_t is an unsigned integer whose bit size is large enough to hold a pointer of the native architecture.

So:

sizeof(size_t) >= sizeof(void*)

Without examples of the dataset of staging this is a shot in the dark, but have you tried something like this?

update PRODUCTION p,
       staging s
set p.name = s.name  
    p.count = s.count
where p.id = s.id

This would work assuming the id column matches on both tables.

The operators && and || are short-circuiting, meaning they will not evaluate their right-hand expression if the value of the left-hand expression is enough to determine the result.

I had a slightly augmented issue. I needed to rename a machine and then RE-JOIN a domain it was already a member of and could not find where to do that but its seems very close to what is here. The individual solutions above don't do it but with some togetherness... If you try to rename, you get denied. If you rename and then rejoin, you get an account already exists error. You need to bail from the domain by joining a workgroup and then you can run the rename and join in one command.

$Chops = Get-Credential 
# Or bring in a stored credential
$NewComputerName = "WhoImGonnaBe" 
# or value from CSV
$MyDomainName = "MyDomain"
Add-Computer -WorkgroupName NotADomain -force -DomainCredential $Chops
Add-Computer -DomainName $MyDomainName -Computername $ENV:Computername -NewName $NewComputerName -DomainCredential $Chops -Force -Restart
#  If running locally you really only need the -NewName and can omit the -Computername

Right-click My Computer -> Manage -> Services Choose "Services" under the "Services and Application" from right pane Then search for the "mysql" Service. When you find it, double click to start that service.

Now you should be able to run and login to PhpMyAdmin

Here is how I do it by using HashSet

        HashSet<String> hs = new HashSet<string>(new String[] { "Pluto", "Earth", "Neptune" });
        String[] arr =
        {
            "Pluto",
            "Earth",
            "Neptune",
            "Jupiter",
            "Saturn",
            "Mercury",
            "Pluto",
            "Earth",
            "Neptune",
            "Jupiter",
            "Saturn",
            "Mercury",
            // etc.
        };
        ICollection<String> coll = arr;

        String[] arrStrFiltered = coll.Where(str => hs.Contains(str)).ToArray();

HashSet is basically almost to O(1) so your complexity remains O(n).

As this has already been properly answered, I'd just add the following site as a reference:

Unicode Table

You can search for "check", for example.

As requested, I decided to extend my comment on forefinger's answer to a full-fledged answer. Although his answer is correct, it is needlessly complex. Furthermore all current answers use signed ints to represent the values. This is dangerous, as right-shifting of negative values is implementation-defined (i.e. not portable) and left-shifting can lead to undefined behavior (see this question).

By right-shifting the desired bit into the least significant bit position, masking can be done with 1. No need to compute a new mask value for each bit.

(n >> k) & 1

As a complete program, computing (and subsequently printing) an array of single bit values:

#include <stdio.h>
#include <stdlib.h>

int main(int argc, char** argv)
{
    unsigned
        input = 0b0111u,
        n_bits = 4u,
        *bits = (unsigned*)malloc(sizeof(unsigned) * n_bits),
        bit = 0;

    for(bit = 0; bit < n_bits; ++bit)
        bits[bit] = (input >> bit) & 1;

    for(bit = n_bits; bit--;)
        printf("%u", bits[bit]);
    printf("\n");

    free(bits);
}

Assuming that you want to calculate all bits as in this case, and not a specific one, the loop can be further changed to

for(bit = 0; bit < n_bits; ++bit, input >>= 1)
    bits[bit] = input & 1;

This modifies input in place and thereby allows the use of a constant width, single-bit shift, which may be more efficient on some architectures.

Pinal Dave explains this well in his blog.

http://blog.sqlauthority.com/2009/07/01/sql-server-difference-between-line-feed-n-and-carriage-return-r-t-sql-new-line-char/

DECLARE @NewLineChar AS CHAR(2) = CHAR(13) + CHAR(10)
PRINT ('SELECT FirstLine AS FL ' + @NewLineChar + 'SELECT SecondLine AS SL')

from the man page

linux$ man -S 5 crontab

   cron(8) examines cron entries once every minute.

   The time and date fields are:

          field          allowed values
          -----          --------------
          minute         0-59
          hour           0-23
          day of month   1-31
          month          1-12 (or names, see below)
          day of week    0-7 (0 or 7 is Sun, or use names)
   ...
   # run five minutes after midnight, every day
   5 0 * * *       $HOME/bin/daily.job >> $HOME/tmp/out 2>&1
   ...

It is good to note the special "nicknames" that can be used (documented in the man page), particularly "@reboot" which has no time and date alternative.

   # Run once after reboot.
   @reboot         /usr/local/sbin/run_only_once_after_reboot.sh

You can also use this trick to run your cron job multiple times per minute.

   # Run every minute at 0, 20, and 40 second intervals
   * * * * *       sleep 00; /usr/local/sbin/run_3times_per_minute.sh
   * * * * *       sleep 20; /usr/local/sbin/run_3times_per_minute.sh
   * * * * *       sleep 40; /usr/local/sbin/run_3times_per_minute.sh

To add a cron job, you can do one of three things:

1. add a command to a user's crontab, as shown above (and from the crontab, section 5, man page).

   • edit a user's crontab as root with crontab -e -u <username>
   • or edit the current user's crontab with just crontab -e
   • You can set the editor with the EDITOR environment variable
     • env EDITOR=nano crontab -e -u <username>
     • or set the value of EDITOR for your entire shell session
       1. export EDITOR=vim
       2. crontab -e
   • Make scripts executable with chmod a+x <file>

2. create a script/program as a cron job, and add it to the system's anacron /etc/cron.*ly directories

   • anacron /etc/cron.*ly directories:
     • /etc/cron.daily
     • /etc/cron.hourly
     • /etc/cron.monthly
     • /etc/cron.weekly
   • as in:
     • /etc/cron.daily/script_runs_daily.sh
     • chmod a+x /etc/cron.daily/script_runs_daily.sh -- make it executable
   • See also the anacron man page: man anacron
   • Make scripts executable with chmod a+x <file>
   • When do these cron.*ly script run?
     • For RHEL/CentOS 5.x, they are configured in /etc/crontab or /etc/anacrontab to run at a set time
     • RHEL/CentOS 6.x+ and Fedora 17+ Linux systems only define this in /etc/anacrontab, and define cron.hourly in /etc/cron.d/0hourly

3. Or, One can create system crontables in /etc/cron.d.

   • The previously described crontab syntax (with additionally providing a user to execute each job as) is put into a file, and the file is dropped into the /etc/cron.d directory.
   • These are easy to manage in system packaging (e.g. RPM packages), so may usually be application specific.
   • The syntax difference is that a user must be specified for the cron job after the time/date fields and before the command to execute.
   • The files added to /etc/cron.d do not need to be executable.
   • Here is an example job that is executed as the user someuser, and the use of /bin/bash as the shell is forced.

   File: /etc/cron.d/myapp-cron
   # use /bin/bash to run commands, no matter what /etc/passwd says
   SHELL=/bin/bash
   # Execute a nightly (11:00pm) cron job to scrub application records
   00 23 * * * someuser /opt/myapp/bin/scrubrecords.php

The 'sed' solutions mentioned earlier are nice but as mentioned not 100% secure

• You may have INSERT commands with data containing: ... CREATE TABLE...(whatever)...mytable...

• or even the exact string "CREATE TABLE `mytable`;" if you are storing DML commands for instance!

(and if the table is huge you don't want to check that manually)

I would verify the exact syntax of the dump version used, and have a more restrictive pattern search:

Avoid ".*" and use "^" to ensure we start at the begining of the line. And I'd prefer to grab the initial 'DROP'

All in all, this works better for me:

sed -n -e '/^DROP TABLE IF EXISTS \`mytable\`;/,/^UNLOCK TABLES;/p' mysql.dump > mytable.dump

Testing this Javascript:

var arr = [1234563995.721, 12345691212.718, 1234568421.5891, 12345677093.49284];

var sum = 0;
for( var i = 0; i < arr.length; i++ ) {
    sum += arr[i];
}

alert( "fMath(sum) = " + Math.round( sum * 1e12 ) / 1e12 );
alert( "fFixed(sum) = " + sum.toFixed( 5 ) );

Conclusion

Dont use Math.round( (## + ## + ... + ##) * 1e12) / 1e12

Instead, use ( ## + ## + ... + ##).toFixed(5) )

In IE 9, toFixed works very well.

This is my version, in C#, I was basically get most part from Brook's answer and modified it to fit my purpose

public static byte[] GetElementImage(this IWebElement element)
    {
        var screenShot = MobileDriver.Driver.GetScreenshot();
        using (var stream = new MemoryStream(screenShot.AsByteArray))
        {
            var screenBitmap = new Bitmap(stream);
            var elementBitmap = screenBitmap.Clone(
                new Rectangle(
                    element.Location.X,
                    element.Location.Y,
                    element.Size.Width,
                    element.Size.Height
                ),
                screenBitmap.PixelFormat
            );
            var converter = new ImageConverter();
            return (byte[]) converter.ConvertTo(elementBitmap, typeof(byte[]));
        }
    }

In your current code, what Dictionary.update() does is that it updates (update means the value is overwritten from the value for same key in passed in dictionary) the keys in current dictionary with the values from the dictionary passed in as the parameter to it (adding any new key:value pairs if existing) . A single flat dictionary does not satisfy your requirement , you either need a list of dictionaries or a dictionary with nested dictionaries.

If you want a list of dictionaries (where each element in the list would be a diciotnary of a entry) then you can make case_list as a list and then append case to it (instead of update) .

Example -

case_list = []
for entry in entries_list:
    case = {'key1': entry[0], 'key2': entry[1], 'key3':entry[2] }
    case_list.append(case)

Or you can also have a dictionary of dictionaries with the key of each element in the dictionary being entry1 or entry2 , etc and the value being the corresponding dictionary for that entry.

case_list = {}
for entry in entries_list:
    case = {'key1': value, 'key2': value, 'key3':value }
    case_list[entryname] = case  #you will need to come up with the logic to get the entryname.

I am running Angular 4 (v.4.0.0) and ng-bootstrap (Bootstrap 4). This code won't all be relevant but hoping people can pick and choose what works. It took me sometime to find a solution to get my items to justify right, collapse properly and to implement a dropdown off my google (using OAuth) profile picture.

<div id="header" class="header">
  <nav class="navbar navbar-toggleable-sm navbar-inverse bg-faded fixed-top">
    <button class="navbar-toggler navbar-toggler-right" type="button" data-toggle="collapse" data-target="#navbarSupportedContent"
      aria-controls="navbarSupportedContent" aria-expanded="false" aria-label="Toggle navigation">
    <span class="navbar-toggler-icon"></span>
  </button>
    <a class="navbar-brand" href="#">
          <img alt='Brand' src='../assets/images/logo-white.png' class='navbar-logo-img d-inline-block align-top '>
          <span class="navbar-logo-text">Oncoscape</span>
        </a>
    <div class="collapse navbar-collapse justify-content-end" id="navbarSupportedContent">
      <ul class="navbar-nav float-left">
        <a class="navbar-items nav-item nav-link active " *ngIf='authenticated' (click)='goDashboard()'>
          <span class="fa fa-dashboard"></span>Dashboard
        </a>
        <a class="nav-item nav-link navbar-items active" href="http://resources.sttrcancer.org/oncoscape-contact">
          <span class="fa fa-comments"></span>Feedback
        </a>
        <li class="nav-item dropdown">
          <a class="nav-link dropdown-toggle" id="navbarDropdownMenuLink" data-toggle="dropdown" aria-haspopup="true" aria-expanded="false">
            <img *ngIf='user && authenticated'  class="navbar-pic" src={{user.thumbnail}} alt="Smiley face">
          </a>
          <div *ngIf='user && authenticated' class="dropdown-menu " aria-labelledby="navbarDropdownMenuLink">
            <a class="dropdown-item" (click)="toProfile()">Account</a>
            <div class="dropdown-item">
              <app-login></app-login>
            </div>
          </div>
        </li>
      </ul>
    </div>
  </nav>
</div>
<router-outlet></router-outlet>

None of the above worked for me. This is what worked for me on Enzyme ^3.1.1:

input.instance().props.onChange(({ target: { value: '19:00' } }));

Here is the rest of the code for context:

const fakeHandleChangeValues = jest.fn();
  const fakeErrors = {
    errors: [{
      timePeriod: opHoursData[0].timePeriod,
      values: [{
        errorIndex: 2,
        errorTime: '19:00',
      }],
    }],
    state: true,
  };
const wrapper = mount(<AccessibleUI
    handleChangeValues={fakeHandleChangeValues}
    opHoursData={opHoursData}
    translations={translationsForRendering}
  />);
const input = wrapper.find('#input-2').at(0);
input.instance().props.onChange(({ target: { value: '19:00' } }));
expect(wrapper.state().error).toEqual(fakeErrors);

No, you're re-initializing x in every loop. Change to:

int[] tall = new int[28123];
int x = 0;

for (int j = 1;j<=28123;j++){
    tall[x] = j;
    x++;
}

Or, even better (since x is always equal to j-1):

int[] tall = new int[28123];

for (int j = 1;j<=28123;j++){
    tall[j-1] = j;
}

This worked great I just add the -a option to ping to resolve the hostname. Thanks https://stackoverflow.com/users/4447323/wombat

@echo off setlocal enabledelayedexpansion set OUTPUT_FILE=result.csv

>nul copy nul %OUTPUT_FILE%
echo HOSTNAME,LONGNAME,IPADDRESS,STATE >%OUTPUT_FILE%
for /f %%i in (testservers.txt) do (
    set SERVER_ADDRESS_I=UNRESOLVED
    set SERVER_ADDRESS_L=UNRESOLVED
    for /f "tokens=1,2,3" %%x in ('ping -n 1 -a %%i ^&^& echo SERVER_IS_UP') do (
    if %%x==Pinging set SERVER_ADDRESS_L=%%y
    if %%x==Pinging set SERVER_ADDRESS_I=%%z
        if %%x==SERVER_IS_UP (set SERVER_STATE=UP) else (set SERVER_STATE=DOWN)
    )
    echo %%i [!SERVER_ADDRESS_L::=!] !SERVER_ADDRESS_I::=! is !SERVER_STATE!
    echo %%i,!SERVER_ADDRESS_L::=!,!SERVER_ADDRESS_I::=!,!SERVER_STATE! >>%OUTPUT_FILE%
)

$_SERVER['PHP_SELF'] for the page name and $_GET['id'] for a specific parameter.

try print_r($_GET); to print out all the parameters.

for your request echo $_SERVER['PHP_SELF']."?id=".$_GET['id'];

return all the parameters echo $_SERVER['PHP_SELF']."?".$_SERVER['QUERY_STRING'];

I would be using laravel whereDoesntHave to achieve this.

Customer::whereDoesntHave('orders')->get();

Just add an onclick event to the button:

<button onclick="location.href = 'www.yoursite.com';" id="myButton" class="float-left submit-button" >Home</button>

But you shouldn't really have it inline like that, instead, put it in a JS block and give the button an ID:

<button id="myButton" class="float-left submit-button" >Home</button>

<script type="text/javascript">
    document.getElementById("myButton").onclick = function () {
        location.href = "www.yoursite.com";
    };
</script>

Here is an example code

import unicodedata    
raw_text = u"here $%6757 dfgdfg"
convert_text = unicodedata.normalize('NFKD', raw_text).encode('ascii','ignore')

Just a slight addition to the above solution if you are having problem with downloaded file's name...

Response.AddHeader("Content-Disposition", "attachment; filename=\"" + file.Name + "\"");

This will return the exact file name even if it contains spaces or other characters.

I was looking for the same feature today but couldn't do this in Notepad++. However, we have TextPad to our rescue. It worked for me.

In TextPad's replace dialog, turn on regex; then you could try replacing

<row id="1"/>

by

<row id="\i"/>

Have a look at this link for further amazing replace features of TextPad - http://sublimetext.userecho.com/topic/106519-generate-a-sequence-of-numbers-increment-replace/

have a look here for the full syntax: http://en.wikipedia.org/wiki/File_URI_scheme for unix-like systems it will be as @Alex said file:///your/file/here whereas for Windows systems would be file:///c|/path/to/file

Addition to @BalusC 's answer. You also need to set width of headers. In my case, below css can only apply to my table's column width.

.myTable td:nth-child(1),.myTable th:nth-child(1) {
   width: 20px;
}

Okay I was facing this problem for days. Was trying to import POI library and Simple JSON library, I tried all the proposed answers and solution nothing worked. In the end the solution for my case was quite simple

I just needed to add the following to my module-info.java file after putting the dependencies in my POM file :

 requires poi.ooxml;
 requires poi;
 requires json.simple;

so I think because my project was in a package in a module I had to do this to let the system knows that these imported libraries will be used. so simple put the library name after require in your module-info.java file

Hope it works for you

Here's the more generic answer:

If you are sure the method name is unique you can only filter by method name (this works for me)

phpunit --filter {TestMethodName}

However it is safer to specify the file path/reference as well

phpunit --filter {TestMethodName} {FilePath}

Example:

phpunit --filter testSaveAndDrop reference/to/escalation/EscalationGroupTest.php

Quick note: I've noticed that if I have a function named testSave and another function named testSaveAndDrop using command phpunit --filter testSave will also run testSaveAndDrop and any other function that starts with testSave*, it's weird!!

if status is of type Status enum, status.name() will give you its defined name.

Querying a simple subquery sorted descending, followed by sorting on the same column ascending does the trick.

SELECT * FROM 
    (SELECT TOP 200 * FROM [table] t2 ORDER BY t2.[column] DESC) t1
    ORDER BY t1.[column]

What you want to do is really important for unit testing. Basically you need to create a small local function in the view controller. Name the function anything, just include the performSegueWithIndentifier.

func localFunc() {
    println("we asked you to do it")
    performSegueWithIdentifier("doIt", sender: self)
}

Next change your utility class FBManager to include an initializer that takes an argument of a function and a variable to hold the ViewController's function that performs the segue.

public class UtilClass {

    var yourFunction : () -> ()

    init (someFunction: () -> ()) {
        self.yourFunction = someFunction
        println("initialized UtilClass")
    }

    public convenience init() {
        func dummyLog () -> () {
            println("no action passed")
        }
        self.init(dummyLog)
    }

    public func doThatThing() -> () {
        // the facebook login function
        println("now execute passed function")
        self.yourFunction()
        println("did that thing")
    }
}

(The convenience init allows you to use this in unit testing without executing the segue.)

Finally, where you have //todo: segue to the next view???, put something along the lines of:

self.yourFunction()

In your unit tests, you can simply invoke it as:

let f = UtilClass()
f.doThatThing()

where doThatThing is your fbsessionstatechange and UtilClass is FBManager.

For your actual code, just pass localFunc (no parenthesis) to the FBManager class.

You can't: DataFrame columns are Series, by definition. That said, if you make the dtype (the type of all the elements) datetime-like, then you can access the quantities you want via the .dt accessor (docs):

>>> df["TimeReviewed"] = pd.to_datetime(df["TimeReviewed"])
>>> df["TimeReviewed"]
205  76032930   2015-01-24 00:05:27.513000
232  76032930   2015-01-24 00:06:46.703000
233  76032930   2015-01-24 00:06:56.707000
413  76032930   2015-01-24 00:14:24.957000
565  76032930   2015-01-24 00:23:07.220000
Name: TimeReviewed, dtype: datetime64[ns]
>>> df["TimeReviewed"].dt
<pandas.tseries.common.DatetimeProperties object at 0xb10da60c>
>>> df["TimeReviewed"].dt.year
205  76032930    2015
232  76032930    2015
233  76032930    2015
413  76032930    2015
565  76032930    2015
dtype: int64
>>> df["TimeReviewed"].dt.month
205  76032930    1
232  76032930    1
233  76032930    1
413  76032930    1
565  76032930    1
dtype: int64
>>> df["TimeReviewed"].dt.minute
205  76032930     5
232  76032930     6
233  76032930     6
413  76032930    14
565  76032930    23
dtype: int64

If you're stuck using an older version of pandas, you can always access the various elements manually (again, after converting it to a datetime-dtyped Series). It'll be slower, but sometimes that isn't an issue:

>>> df["TimeReviewed"].apply(lambda x: x.year)
205  76032930    2015
232  76032930    2015
233  76032930    2015
413  76032930    2015
565  76032930    2015
Name: TimeReviewed, dtype: int64

I have tried to use AjaxableResponseMixin in my project, but had ended up with the following error message:

ImproperlyConfigured: No URL to redirect to. Either provide a url or define a get_absolute_url method on the Model.

That is because the CreateView will return a redirect response instead of returning a HttpResponse when you to send JSON request to the browser. So I have made some changes to the AjaxableResponseMixin. If the request is an ajax request, it will not call the super.form_valid method, just call the form.save() directly.

from django.http import JsonResponse
from django import forms
from django.db import models

class AjaxableResponseMixin(object):
    success_return_code = 1
    error_return_code = 0
    """
    Mixin to add AJAX support to a form.
    Must be used with an object-based FormView (e.g. CreateView)
    """
    def form_invalid(self, form):
        response = super(AjaxableResponseMixin, self).form_invalid(form)
        if self.request.is_ajax():
            form.errors.update({'result': self.error_return_code})
            return JsonResponse(form.errors, status=400)
        else:
            return response

    def form_valid(self, form):
        # We make sure to call the parent's form_valid() method because
        # it might do some processing (in the case of CreateView, it will
        # call form.save() for example).
        if self.request.is_ajax():
            self.object = form.save()
            data = {
                'result': self.success_return_code
            }
            return JsonResponse(data)
        else:
            response = super(AjaxableResponseMixin, self).form_valid(form)
            return response

class Product(models.Model):
    name = models.CharField('product name', max_length=255)

class ProductAddForm(forms.ModelForm):
    '''
    Product add form
    '''
    class Meta:
        model = Product
        exclude = ['id']


class PriceUnitAddView(AjaxableResponseMixin, CreateView):
    '''
    Product add view
    '''
    model = Product
    form_class = ProductAddForm

This worked for me for cardView and will work the same for listview inside adapter calss, within onBindViewHolder() function

holder.cardView.setOnLongClickListener(new View.OnLongClickListener() {
            @Override
            public boolean onLongClick(View v) {
                return false;
            }
        });

sumr is implemented in terms of foldRight:

 final def sumr(implicit A: Monoid[A]): A = F.foldRight(self, A.zero)(A.append) 

foldRight is not always tail recursive, so you can overflow the stack if the collection is too long. See Why foldRight and reduceRight are NOT tail recursive? for some more discussion of when this is or isn't true.

Just to offer you a different angle -

I find it's not a good idea to maintain public variables between function calls. Any variables you need to use should be stored in Subs and Functions and passed as parameters. Once the code is done running, you shouldn't expect the VBA Project to maintain the values of any variables.

The reason for this is that there is just a huge slew of things that can inadvertently reset the VBA Project while using the workbook. When this happens, any public variables get reset to 0.

If you need a value to be stored outside of your subs and functions, I highly recommend using a hidden worksheet with named ranges for any information that needs to persist.

If you have the need to keep the environment variables in a script you can put your command in a here document like this. Especially if you have lots of variables to set things look tidy this way.

# prepare a script e.g. for running maven
runmaven=/tmp/runmaven$$
# create the script with a here document 
cat << EOF > $runmaven
#!/bin/bash
# run the maven clean with environment variables set
export ANT_HOME=/usr/share/ant
export MAKEFLAGS=-j4
mvn clean install
EOF
# make the script executable
chmod +x $runmaven
# run it
sudo $runmaven
# remove it or comment out to keep
rm $runmaven

Use the namespace System.Net.Mail. Here is a link to the MSDN page

You can send emails using SmtpClient class.

I paraphrased the code sample, so checkout MSDNfor details.

MailMessage message = new MailMessage(
   "[email protected]",
   "[email protected]",
   "Subject goes here",
   "Body goes here");

SmtpClient client = new SmtpClient(server);
client.Send(message);

The best way to send many emails would be to put something like this in forloop and send away!

The problem here is that if there are too many data bars the labels will not show.

To fix this, under the "Chart Axis" properties set the Interval value to "=1". Then all the labels will be shown.

If you have the Windows SDK installed on your machine, you'll find the "Fusion Log Viewer" under Microsoft SDK\Tools (just type "Fusion" in the start menu on Vista or Windows 7/8). Launch it, click the Settings button, and select "Log bind failure" or "Log all binds".

If these buttons are disabled, go back to the start menu, right-click the Log Viewer, and select "Run as Administrator".

The original question specifically asked for Unix but multiple answers have touched on Windows, and as a result there is misleading information on windows. The default timer resolution on windows is 15.6ms you can verify here.

Using a slightly modified script from cod3monk3y I can show that windows timer resolution is ~15milliseconds by default. I'm using a tool available here to modify the resolution.

Script:

import time

# measure the smallest time delta by spinning until the time changes
def measure():
    t0 = time.time()
    t1 = t0
    while t1 == t0:
        t1 = time.time()
    return t1-t0

samples = [measure() for i in range(30)]

for s in samples:
    print(f'time delta: {s:.4f} seconds') 

These results were gathered on windows 10 pro 64-bit running python 3.7 64-bit.

I would say that when you have a language like Lisp with its support for macros, then you can build you own domain-specific abstractions, abstractions which often are much better than the general idiom solutions.

1.If I have something like Foo o = new Foo(); inside the method, does that mean that each time the timer ticks, I'm creating a new object and a new reference to that object?

Yes.

2.If I have string foo = null and then I just put something temporal in foo, is it the same as above?

If you are asking if the behavior is the same then yes.

3.Does the garbage collector ever delete the object and the reference or objects are continually created and stay in memory?

The memory used by those objects is most certainly collected after the references are deemed to be unused.

4.If I just declare Foo o; and not point it to any instance, isn't that disposed when the method ends?

No, since no object was created then there is no object to collect (dispose is not the right word).

5.If I want to ensure that everything is deleted, what is the best way of doing it

If the object's class implements IDisposable then you certainly want to greedily call Dispose as soon as possible. The using keyword makes this easier because it calls Dispose automatically in an exception-safe way.

Other than that there really is nothing else you need to do except to stop using the object. If the reference is a local variable then when it goes out of scope it will be eligible for collection.¹ If it is a class level variable then you may need to assign null to it to make it eligible before the containing class is eligible.

¹This is technically incorrect (or at least a little misleading). An object can be eligible for collection long before it goes out of scope. The CLR is optimized to collect memory when it detects that a reference is no longer used. In extreme cases the CLR can collect an object even while one of its methods is still executing!

Update:

Here is an example that demonstrates that the GC will collect objects even though they may still be in-scope. You have to compile a Release build and run this outside of the debugger.

static void Main(string[] args)
{
    Console.WriteLine("Before allocation");
    var bo = new BigObject();
    Console.WriteLine("After allocation");
    bo.SomeMethod();
    Console.ReadLine();
    // The object is technically in-scope here which means it must still be rooted.
}

private class BigObject
{
    private byte[] LotsOfMemory = new byte[Int32.MaxValue / 4];

    public BigObject()
    {
        Console.WriteLine("BigObject()");
    }

    ~BigObject()
    {
        Console.WriteLine("~BigObject()");
    }

    public void SomeMethod()
    {
        Console.WriteLine("Begin SomeMethod");
        GC.Collect();
        GC.WaitForPendingFinalizers();
        Console.WriteLine("End SomeMethod");
    }
}

On my machine the finalizer is run while SomeMethod is still executing!

more generally, this could also look like this:

import multiprocessing
def chunks(l, n):
    for i in range(0, len(l), n):
        yield l[i:i + n]

numberOfThreads = 4


if __name__ == '__main__':
    jobs = []
    for i, param in enumerate(params):
        p = multiprocessing.Process(target=f, args=(i,param))
        jobs.append(p)
    for i in chunks(jobs,numberOfThreads):
        for j in i:
            j.start()
        for j in i:
            j.join()

Of course, that way is quite cruel (since it waits for every process in a junk until it continues with the next chunk). Still it works well for approx equal run times of the function calls.

goto Mycomputer(This PC) -> rightclick ->select properties -> Advanced system settings -> environment variables-> in system variables click "New" button and write JAVA_HOME in variable name and path C:\Program Files\Java\jdk1.8.0_131 were jdk is present in variable value-> click ok.

close and reopen the command prompt after setting JAVA_HOME. Sometimes changes does not reflect in the cmd opened before setting the JAVA_HOME.

you can also set JAVA_HOME through terminal itself: SET JAVA_HOME="C:\Program Files (x86)\Java\jdk1.8.0_131"

After Saving $data->save(). all data is pushed inside $data. As this is an object and the current row is just saved recently inside $data. so last insertId will be found inside $data->id.

Response code will be:

return Response::json(array('success' => true, 'last_insert_id' => $data->id), 200);

You can use basename() and $_SERVER['PHP_SELF'] to get current page file name

echo basename($_SERVER['PHP_SELF']); /* Returns The Current PHP File Name */

An HttpOnly cookie means that it's not available to scripting languages like JavaScript. So in JavaScript, there's absolutely no API available to get/set the HttpOnly attribute of the cookie, as that would otherwise defeat the meaning of HttpOnly.

Just set it as such on the server side using whatever server side language the server side is using. If JavaScript is absolutely necessary for this, you could consider to just let it send some (ajax) request with e.g. some specific request parameter which triggers the server side language to create an HttpOnly cookie. But, that would still make it easy for hackers to change the HttpOnly by just XSS and still have access to the cookie via JS and thus make the HttpOnly on your cookie completely useless.

1. Normal Class: A Java class

2. Java Beans:

   • All properties private (use getters/setters)
   • A public no-argument constructor
   • Implements Serializable.

3. Pojo: Plain Old Java Object is a Java object not bound by any restriction other than those forced by the Java Language Specification. I.e., a POJO should not have to

   • Extend prespecified classes
   • Implement prespecified interface
   • Contain prespecified annotations

It's probably easiest to create your query object directly as:

  Test.find({
      $and: [
          { $or: [{a: 1}, {b: 1}] },
          { $or: [{c: 1}, {d: 1}] }
      ]
  }, function (err, results) {
      ...
  }

But you can also use the Query#and helper that's available in recent 3.x Mongoose releases:

  Test.find()
      .and([
          { $or: [{a: 1}, {b: 1}] },
          { $or: [{c: 1}, {d: 1}] }
      ])
      .exec(function (err, results) {
          ...
      });

Unfortunately, WebKit browsers do not support styling of <option> tags yet, except for color and background-color.

The most widely used cross browser solution is to use <ul> / <li> and style them using CSS. Frameworks like Bootstrap do this well.

window.history.back(); Sometimes it's an issue with javascript compatibility with ajax call or design-related challenges.

I would use this below function for go back with the refresh.

function GoBackWithRefresh(event) {
    if ('referrer' in document) {
        window.location = document.referrer;
        /* OR */
        //location.replace(document.referrer);
    } else {
        window.history.back();
    }
}

In your html, use:

<a href="#" onclick="GoBackWithRefresh();return false;">BACK</a>`

For more customization you can use history.js plugins.

If you are a linux user Update node to a later version by running

sudo apt update

 sudo apt install build-essential checkinstall libssl-dev

curl -o- https://raw.githubusercontent.com/creationix/nvm/v0.35.1/install.sh | bash

nvm --version

nvm ls

nvm ls-remote

nvm install [version.number]

this should solve your problem

1 += 2 is a syntax error (left-side must be a variable).

x += y is shorthand for x = x + y.

Windows 10 - TH2 and above:

(a.k.a. Version 1511, build 10586, release 2015-11-10)

At Command Prompt:

echo ^[[32m HI ^[[0m

Using the actual keys:   echo Ctrl+[[32m HI Ctrl+[[0mEnter

You should see a green "HI" below it.

Code numbers can be found here:

• https://en.wikipedia.org/wiki/ANSI_escape_code#Colors

Notepad:

To save this into notepad, you can type ESC into it using: Alt+027 with the numpad, then the [32m part. Another trick when I was on a laptop, redirect the line above into a file to get started, then cut and paste:

echo echo ^[[32m HI ^[[0m >> batch_file.cmd

Here is what you are looking for:

String sDate = DateTime.Now.ToString();
DateTime datevalue = (Convert.ToDateTime(sDate.ToString()));

String dy = datevalue.Day.ToString();
String mn = datevalue.Month.ToString();
String yy = datevalue.Year.ToString();

OR

Alternatively, you can use split function to split string date into day, month and year here.

Hope, it will helps you... Cheers. !!

Object-Oriented Software Construction by Bertrand Meyer

See also here: http://sqlblog.com/blogs/alexander_kuznetsov/archive/2008/06/26/fun-with-dbcc-chekident.aspx

This is documented behavior, why do you run CHECKIDENT if you recreate the table, in that case skip the step or use TRUNCATE (if you don't have FK relationships)

A separate use case: when your text file is version controlled (in this case specifically under git although it applies to others too). If content is added to the end of the file, then the line that was previously the last line will have been edited to include a newline character. This means that blameing the file to find out when that line was last edited will show the text addition, not the commit before that you actually wanted to see.

You need the n flag. To count words use:

:%s/\i\+/&/gn   

and a particular word:

:%s/the/&/gn        

See count-items documentation section.

If you simply type in:

%s/pattern/pattern/g

then the status line will give you the number of matches in vi as well.

    string & replace(string & subj, string old, string neu)
    {
        size_t uiui = subj.find(old);
        if (uiui != string::npos)
        {
           subj.erase(uiui, old.size());
           subj.insert(uiui, neu);
        }
        return subj;
    }

I think this fits your requirement with few code!

import re
result=[x for x in re.split(',| ',your_string) if x!='']

this works fine for me.

I use this to download file

function cURLcheckBasicFunctions()
{
  if( !function_exists("curl_init") &&
      !function_exists("curl_setopt") &&
      !function_exists("curl_exec") &&
      !function_exists("curl_close") ) return false;
  else return true;
}

/*
 * Returns string status information.
 * Can be changed to int or bool return types.
 */
function cURLdownload($url, $file)
{
  if( !cURLcheckBasicFunctions() ) return "UNAVAILABLE: cURL Basic Functions";
  $ch = curl_init();
  if($ch)
  {

    $fp = fopen($file, "w");
    if($fp)
    {
      if( !curl_setopt($ch, CURLOPT_URL, $url) )
      {
        fclose($fp); // to match fopen()
        curl_close($ch); // to match curl_init()
        return "FAIL: curl_setopt(CURLOPT_URL)";
      }
      if ((!ini_get('open_basedir') && !ini_get('safe_mode')) || $redirects < 1) {
        curl_setopt($ch, CURLOPT_USERAGENT, '"Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.8.1.11) Gecko/20071204 Ubuntu/7.10 (gutsy) Firefox/2.0.0.11');
        curl_setopt($ch, CURLOPT_RETURNTRANSFER, 1);
        //curl_setopt($ch, CURLOPT_REFERER, 'http://domain.com/');
        if( !curl_setopt($ch, CURLOPT_HEADER, $curlopt_header)) return "FAIL: curl_setopt(CURLOPT_HEADER)";
        if( !curl_setopt($ch, CURLOPT_FOLLOWLOCATION, $redirects > 0)) return "FAIL: curl_setopt(CURLOPT_FOLLOWLOCATION)";
        if( !curl_setopt($ch, CURLOPT_FILE, $fp) ) return "FAIL: curl_setopt(CURLOPT_FILE)";
        if( !curl_setopt($ch, CURLOPT_MAXREDIRS, $redirects) ) return "FAIL: curl_setopt(CURLOPT_MAXREDIRS)";

        return curl_exec($ch);
    } else {
        curl_setopt($ch, CURLOPT_USERAGENT, '"Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.8.1.11) Gecko/20071204 Ubuntu/7.10 (gutsy) Firefox/2.0.0.11');
        curl_setopt($ch, CURLOPT_RETURNTRANSFER, 1);
        //curl_setopt($ch, CURLOPT_REFERER, 'http://domain.com/');
        if( !curl_setopt($ch, CURLOPT_FOLLOWLOCATION, false)) return "FAIL: curl_setopt(CURLOPT_FOLLOWLOCATION)";
        if( !curl_setopt($ch, CURLOPT_FILE, $fp) ) return "FAIL: curl_setopt(CURLOPT_FILE)";
        if( !curl_setopt($ch, CURLOPT_HEADER, true)) return "FAIL: curl_setopt(CURLOPT_HEADER)";
        if( !curl_setopt($ch, CURLOPT_RETURNTRANSFER, true)) return "FAIL: curl_setopt(CURLOPT_RETURNTRANSFER)";
        if( !curl_setopt($ch, CURLOPT_FORBID_REUSE, false)) return "FAIL: curl_setopt(CURLOPT_FORBID_REUSE)";
        curl_setopt($ch, CURLOPT_USERAGENT, '"Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.8.1.11) Gecko/20071204 Ubuntu/7.10 (gutsy) Firefox/2.0.0.11');
    }
      // if( !curl_setopt($ch, CURLOPT_FOLLOWLOCATION, true) ) return "FAIL: curl_setopt(CURLOPT_FOLLOWLOCATION)";
      // if( !curl_setopt($ch, CURLOPT_FILE, $fp) ) return "FAIL: curl_setopt(CURLOPT_FILE)";
      // if( !curl_setopt($ch, CURLOPT_HEADER, 0) ) return "FAIL: curl_setopt(CURLOPT_HEADER)";
      if( !curl_exec($ch) ) return "FAIL: curl_exec()";
      curl_close($ch);
      fclose($fp);
      return "SUCCESS: $file [$url]";
    }
    else return "FAIL: fopen()";
  }
  else return "FAIL: curl_init()";
}

In case of array like

result = [ '2015',  '2014',  '2013',  '2011' ],

it gets tricky if you are using escape sequence like:

result = [ \'2015\',  \'2014\',  \'2013\',  \'2011\' ].

Instead, good way to do it is to wrap the array with single quotes as follows:

result = "'"+result+"'";

The suggested command:

grep -Ir --exclude="*\.svn*" "pattern" *

is conceptually wrong, because --exclude works on the basename. Put in other words, it will skip only the .svn in the current directory.

I am using Angular 5.2.11, I like the solution provided by Gregor Doroschenko, however I noticed that the uploaded file is of zero bytes, I had to make a small change to get it to work for me.

postFile(fileToUpload: File): Observable<boolean> {
  const endpoint = 'your-destination-url';
  return this.httpClient
    .post(endpoint, fileToUpload, { headers: yourHeadersConfig })
    .map(() => { return true; })
    .catch((e) => this.handleError(e));
}

The following lines (formData) didn't work for me.

const formData: FormData = new FormData();
formData.append('fileKey', fileToUpload, fileToUpload.name);

https://github.com/amitrke/ngrke/blob/master/src/app/services/fileupload.service.ts

I am using windows 8. I had the same problem. I added the path "C:\MinGW\bin" to system environment variable named 'path' then it worked. May be, you can try the same. Hope it'll help!

[self.navigationController setDelegate:self];

Set the delegate to the root view controller.

CHARINDEX() searches for a substring within a larger string, and returns the position of the match, or 0 if no match is found

if CHARINDEX('ME',@mainString) > 0
begin
    --do something
end

Edit or from daniels answer, if you're wanting to find a word (and not subcomponents of words), your CHARINDEX call would look like:

CHARINDEX(' ME ',' ' + REPLACE(REPLACE(@mainString,',',' '),'.',' ') + ' ')

(Add more recursive REPLACE() calls for any other punctuation that may occur)

On Android Studio you can use Device File Explorer to view /data/data/my_app_package/cache.

Click View > Tool Windows > Device File Explorer or click the Device File Explorer button in the tool window bar to open the Device File Explorer.

Documentation

So, your goal is to search and replace?
According to the Official Visual Studio's keyboard shotcuts pdf, you can press Ctrl + H on Windows and Linux, or ??F on Mac to enable search and replace tool:

If you mean to disable the code, you just have to put <h1> in search, and replace to ####.

But if you want to use this regex instead, you may enable it in the icon: and use the regex: <h1>(.+?)<\/h1> and replace to: #### $1.

And as @tpartee suggested, here is some more information about Visual Studio's engine if you would like to learn more:

• Find and Replace Window (documentation)
• Quick Replace, Find and Replace Window (documentation)
• What flavor of Regex does Visual Studio Code use?

Just for those interested you can avoid writing custom function by passing NULL as last parameter (if you do not intend to do extra processing of returned data).
In this case default internal function is used.

Details
http://curl.haxx.se/libcurl/c/curl_easy_setopt.html#CURLOPTWRITEDATA

Example

#include <stdio.h>
#include <curl/curl.h>

int main(void)
{
    CURL *curl;
    FILE *fp;
    CURLcode res;
    char *url = "http://stackoverflow.com";
    char outfilename[FILENAME_MAX] = "page.html";
    curl = curl_easy_init();                                                                                                                                                                                                                                                           
    if (curl)
    {   
        fp = fopen(outfilename,"wb");
        curl_easy_setopt(curl, CURLOPT_URL, url);
        curl_easy_setopt(curl, CURLOPT_WRITEFUNCTION, NULL);
        curl_easy_setopt(curl, CURLOPT_WRITEDATA, fp);
        res = curl_easy_perform(curl);
        curl_easy_cleanup(curl);
        fclose(fp);
    }   
    return 0;
}

I have created dashed dotted line for EditText. Here you go. Create your new xml. e.g dashed_border.xml Code here:

<layer-list xmlns:android="http://schemas.android.com/apk/res/android">
<item
    android:bottom="1dp"
    android:left="-2dp"
    android:right="-2dp"
    android:top="-2dp">
    <shape android:shape="rectangle">
        <stroke
            android:width="2dp"
            android:color="#000000"
            android:dashGap="3dp"
            android:dashWidth="1dp" />

        <solid android:color="#00FFFFFF" />

        <padding
            android:bottom="10dp"
            android:left="10dp"
            android:right="10dp"
            android:top="10dp" />
    </shape>
</item></layer-list>

And use your new xml file in your EditText for example:

<EditText
    android:layout_width="match_parent"
    android:layout_height="wrap_content"
    android:background="@drawable/dashed_border"/>

Cheers! :)

This launches the Scheduled Tasks MMC Control Panel:

%SystemRoot%\system32\taskschd.msc /s

Older versions of windows had a splash screen for the MMC control panel and the /s switch would supress it. It's not needed but doesn't hurt either.

You could use the Description attribute, as Yuriy suggested. The following extension method makes it easy to get the description for a given value of the enum:

public static string GetDescription(this Enum value)
{
    Type type = value.GetType();
    string name = Enum.GetName(type, value);
    if (name != null)
    {
        FieldInfo field = type.GetField(name);
        if (field != null)
        {
            DescriptionAttribute attr = 
                   Attribute.GetCustomAttribute(field, 
                     typeof(DescriptionAttribute)) as DescriptionAttribute;
            if (attr != null)
            {
                return attr.Description;
            }
        }
    }
    return null;
}

You can use it like this:

public enum MyEnum
{
    [Description("Description for Foo")]
    Foo,
    [Description("Description for Bar")]
    Bar
}

MyEnum x = MyEnum.Foo;
string description = x.GetDescription();

//add this to your css
    .myClass{
          margin 0 auto;
          }

// add the class to the span tag( could add it to the div and not using a span  
// at all
    <div class="row">
   <div class="col-xs-1 center-block">
       <span class="myClass">aaaaaaaaaaaaaaaaaaaaaaaaaaa</span>
   </div>
 </div>

You can do it like what I did with my website:

background-repeat: no-repeat;

background-size: cover;

if we have multiple databases and we need to select all tables for a particular database we can use TABLE_SCHEMA to define database name as:

select table_name from information_schema.tables where TABLE_SCHEMA='dbname';

When you want to throw away a specific number of characters from the input stream manually.

A very common use case is using this to safely ignore newline characters since cin will sometimes leave newline characters that you will have to go over to get to the next line of input.

Long story short it gives you flexibility when handling stream input.

if (window.performance && window.performance.navigation.type == window.performance.navigation.TYPE_BACK_FORWARD) {
  alert('hello world');
}

This is the only one solution that worked for me (it's not a onepage website). It's working with Chrome, Firefox and Safari.

To expand on Pavlo's answer https://stackoverflow.com/a/34063808/1069914, you can have multiple child items justify-content: flex-start in their behavior but have the last item justify-content: flex-end

.container {
  height: 100px;
  border: solid 10px skyblue;
  display: flex;
  justify-content: flex-end;
}

.container > *:not(:last-child) {
    margin-right: 0;
    margin-left: 0;
}

/* set the second to last-child */
.container > :nth-last-child(2) {
    margin-right: auto;
    margin-left: 0;
}

.block {
  width: 50px;
  background: tomato;
  border: 1px solid black;
}

<div class="container">
    <div class="block"></div>
    <div class="block"></div>
    <div class="block"></div>
    <div class="block" style="width:150px">I should be at the end of the flex container (i.e. justify-content: flex-end)</div>
</div>

In casual code I've created lists with millions of elements. I believe that Python's implementation of lists are only bound by the amount of memory on your system.

In addition, the list methods / functions should continue to work despite the size of the list.

If you care about performance, it might be worthwhile to look into a library such as NumPy.

Easiest way i found -

1. Uninstall current version
2. Download the appropriate .msi installer (x64 or x86) for the desired version from https://nodejs.org/download/release/

Easiest solution is to use BuildConfig.

I use BuildConfig.VERSION_NAME in my application.

You can also use BuildConfig.VERSION_CODE to get version code.

This sql script gives the schema, table name and row count of each table in a database selected:

SELECT SCHEMA_NAME(schema_id) AS [SchemaName],
[Tables].name AS [TableName],
SUM([Partitions].[rows]) AS [TotalRowCount]
FROM sys.tables AS [Tables]
JOIN sys.partitions AS [Partitions]
ON [Tables].[object_id] = [Partitions].[object_id]
AND [Partitions].index_id IN ( 0, 1 )
-- WHERE [Tables].name = N'name of the table'
GROUP BY SCHEMA_NAME(schema_id), [Tables].name
order by [TotalRowCount] desc

Ref: https://blog.sqlauthority.com/2017/05/24/sql-server-find-row-count-every-table-database-efficiently/

Another way of doing this:

SELECT  o.NAME TABLENAME,
  i.rowcnt 
FROM sysindexes AS i
  INNER JOIN sysobjects AS o ON i.id = o.id 
WHERE i.indid < 2  AND OBJECTPROPERTY(o.id, 'IsMSShipped') = 0
ORDER BY i.rowcnt desc

You can use recursion in lambdas and defaultdict, no need to define names:

a = defaultdict((lambda f: f(f))(lambda g: lambda:defaultdict(g(g))))

Here's an example:

>>> a['new jersey']['mercer county']['plumbers']=3
>>> a['new jersey']['middlesex county']['programmers']=81
>>> a['new jersey']['mercer county']['programmers']=81
>>> a['new jersey']['middlesex county']['salesmen']=62
>>> a
defaultdict(<function __main__.<lambda>>,
        {'new jersey': defaultdict(<function __main__.<lambda>>,
                     {'mercer county': defaultdict(<function __main__.<lambda>>,
                                  {'plumbers': 3, 'programmers': 81}),
                      'middlesex county': defaultdict(<function __main__.<lambda>>,
                                  {'programmers': 81, 'salesmen': 62})})})

You probably do not want an explicit implementation of IEnumerable<T> (which is what you've shown).

The usual pattern is to use IEnumerable<T>'s GetEnumerator in the explicit implementation of IEnumerable:

class FooCollection : IEnumerable<Foo>, IEnumerable
{
    SomeCollection<Foo> foos;

    // Explicit for IEnumerable because weakly typed collections are Bad
    System.Collections.IEnumerator IEnumerable.GetEnumerator()
    {
        // uses the strongly typed IEnumerable<T> implementation
        return this.GetEnumerator();
    }

    // Normal implementation for IEnumerable<T>
    IEnumerator<Foo> GetEnumerator()
    {
        foreach (Foo foo in this.foos)
        {
            yield return foo;
            //nb: if SomeCollection is not strongly-typed use a cast:
            // yield return (Foo)foo;
            // Or better yet, switch to an internal collection which is
            // strongly-typed. Such as List<T> or T[], your choice.
        }

        // or, as pointed out: return this.foos.GetEnumerator();
    }
}

If you create data\db folder, firstly you must delete this folder then execute:

c:\mongodb\bin\mongo.exe 

I’m pretty sure you don’t add the mime type as a JPEG on file downloads:

header('Content-Type: image/png');

These headers have never failed me:

$quoted = sprintf('"%s"', addcslashes(basename($file), '"\\'));
$size   = filesize($file);

header('Content-Description: File Transfer');
header('Content-Type: application/octet-stream');
header('Content-Disposition: attachment; filename=' . $quoted); 
header('Content-Transfer-Encoding: binary');
header('Connection: Keep-Alive');
header('Expires: 0');
header('Cache-Control: must-revalidate, post-check=0, pre-check=0');
header('Pragma: public');
header('Content-Length: ' . $size);

GuideLines for Anonymous Class.

1. Anonymous class is declared and initialized simultaneously.

2. Anonymous class must extend or implement to one and only one class or interface resp.

3. As anonymouse class has no name, it can be used only once.

eg:

button.addActionListener(new ActionListener(){

            public void actionPerformed(ActionEvent arg0) {
        // TODO Auto-generated method stub

    }
});

The normal way of doing it is:

• You get the users from the database in controller.
• You send a collection of users to the View
• In the view to loop the list of users building the list.

You don't need a JsonResult or jQuery for this.

for swift 3/4

extension String {
    func toJSON() -> Any? {
        guard let data = self.data(using: .utf8, allowLossyConversion: false) else { return nil }
        return try? JSONSerialization.jsonObject(with: data, options: .mutableContainers)
    }
}

Example Usage:

 let dict = myString.toJSON() as? [String:AnyObject] // can be any type here

You can use the centos-sclo-rh-testing repo to install GCC v7 without having to compile it forever, also enable V7 by default and let you switch between different versions if required.

sudo yum install -y yum-utils centos-release-scl;
sudo yum -y --enablerepo=centos-sclo-rh-testing install devtoolset-7-gcc;
echo "source /opt/rh/devtoolset-7/enable" | sudo tee -a /etc/profile;
source /opt/rh/devtoolset-7/enable;
gcc --version;

You can't download the file directly via ajax.

You can put a link on the page with the URL to your file (returned from the ajax call) or another way is to use a hidden iframe and set the URL of the source of that iframe dynamically. This way you can download the file without refreshing the page.

Here is the code

$.ajax({
    url : "yourURL.php",
    type : "GET",
    success : function(data) {
        $("#iframeID").attr('src', 'downloadFileURL');
    }
});

I found out that "git show --stat" is the best out of all here, gives you a brief summary of the commit, what files did you add and modify without giving you whole bunch of stuff, especially if you changed a lot files.

Here's how I did it...

    public static ElementDefinitionImpl[] RemoveElementDefAt(
        ElementDefinition[] oldList,
        int removeIndex
    )
    {
        ElementDefinitionImpl[] newElementDefList = new ElementDefinitionImpl[ oldList.Length - 1 ];

        int offset = 0;
        for ( int index = 0; index < oldList.Length; index++ )
        {
            ElementDefinitionImpl elementDef = oldList[ index ] as ElementDefinitionImpl;
            if ( index == removeIndex )
            {
                //  This is the one we want to remove, so we won't copy it.  But 
                //  every subsequent elementDef will by shifted down by one.
                offset = -1;
            }
            else
            {
                newElementDefList[ index + offset ] = elementDef;
            }
        }
        return newElementDefList;
    }

I think the easiest way in the latest Android versions is by going to Design mode of an XML (not Text).

Then from the menu, select option - Create Landscape Variation. This will create a landscape xml without any hassle in a few seconds. The latest Android Studio version allows you to create a landscape view right away.

I hope this works for you.

You can use plt.subplots_adjust to change the spacing between the subplots Link

subplots_adjust(left=None, bottom=None, right=None, top=None, wspace=None, hspace=None)

left  = 0.125  # the left side of the subplots of the figure
right = 0.9    # the right side of the subplots of the figure
bottom = 0.1   # the bottom of the subplots of the figure
top = 0.9      # the top of the subplots of the figure
wspace = 0.2   # the amount of width reserved for blank space between subplots
hspace = 0.2   # the amount of height reserved for white space between subplots

You can use "system.properties.os", for example:

public class GetOs {

  public static void main (String[] args) {
    String s = 
      "name: " + System.getProperty ("os.name");
    s += ", version: " + System.getProperty ("os.version");
    s += ", arch: " + System.getProperty ("os.arch");
    System.out.println ("OS=" + s);
  }
}

// EXAMPLE OUTPUT: OS=name: Windows 7, version: 6.1, arch: amd64

Here are more details:

• http://docs.oracle.com/javase/tutorial/essential/environment/sysprop.html

Your choofdlog holds a FileName and FileNames (for multi-selection) containing the file paths, after the ShowDialog() returns.

You are looking to see if a single value is in an array. Use in_array.

However note that case is important, as are any leading or trailing spaces. Use var_dump to find out the length of the strings too, and see if they fit.

Here's how you convert a String to a char array:

String str = "someString"; 
char[] charArray = str.toCharArray();

I'd recommend that you use an IDE when programming, to easily see which methods a class contains (in this case you'd be able to find toCharArray()) and compile errors like the one you have above. You should also familiarize yourself with the documentation, which in this case would be this String documentation.

Also, always post which compile errors you're getting. In this case it was easy to spot, but when it isn't you won't be able to get any answers if you don't include it in the post.

I had the same problem (changing a parameter from the HTTP request in the Filter). I ended up by using a ThreadLocal<String>. In the Filter I have:

class MyFilter extends Filter {
    public static final ThreadLocal<String> THREAD_VARIABLE = new ThreadLocal<>();
    public void doFilter(HttpServletRequest request, HttpServletResponse response, FilterChain chain) {
        THREAD_VARIABLE.set("myVariableValue");
        chain.doFilter(request, response);
    }
}

In my request processor (HttpServlet, JSF controller or any other HTTP request processor), I get the current thread value back:

...
String myVariable = MyFilter.THREAD_VARIABLE.get();
...

Advantages:

• more versatile than passing HTTP parameters (you can pass POJO objects)
• slightly faster (no need to parse the URL to extract the variable value)
• more elegant thant the HttpServletRequestWrapper boilerplate
• the variable scope is wider than just the HTTP request (the scope you have when doing request.setAttribute(String,Object), i.e. you can access the variable in other filtrers.

Disadvantages:

• You can use this method only when the thread which process the filter is the same as the one which process the HTTP request (this is the case in all Java-based servers I know). Consequently, this will not work when
  • doing a HTTP redirect (because the browser does a new HTTP request and there is no way to guarantee that it will be processed by the same thread)
  • processing data in separate threads, e.g. when using java.util.stream.Stream.parallel, java.util.concurrent.Future, java.lang.Thread.
• You must be able to modify the request processor/application

Some side notes:

• The server has a Thread pool to process the HTTP requests. Since this is pool:

  1. a Thread from this thread pool will process many HTTP requests, but only one at a time (so you need either to cleanup you variable after usage or to define it for each HTTP request = pay attention to code such as if (value!=null) { THREAD_VARIABLE.set(value);} because you will reuse the value from the previous HTTP request when value is null : side effects are guaranteed).
  2. There is no guarantee that two requests will be processed by the same thread (it may be the case but you have no guarantee). If you need to keep user data from one request to another request, it would be better to use HttpSession.setAttribute()
• The JEE @RequestScoped internally uses a ThreadLocal, but using the ThreadLocal is more versatile: you can use it in non JEE/CDI containers (e.g. in multithreaded JRE applications)

Based on Haim's answer here's a simplified example if you're looking to compare values that exist in BOTH tables, otherwise if there's a row in one table but not the other it will also return it....

Took me a couple of hours to figure out. Here's a fully tested simply query for comparing "tbl_a" and "tbl_b"

SELECT ID, col
FROM
(
    SELECT
    tbl_a.ID, tbl_a.col FROM tbl_a
    UNION ALL
    SELECT
    tbl_b.ID, tbl_b.col FROM tbl_b
) t
WHERE ID IN (select ID from tbl_a) AND ID IN (select ID from tbl_b)
GROUP BY
ID, col
HAVING COUNT(*) = 1
 ORDER BY ID

So you need to add the extra "where in" clause:

WHERE ID IN (select ID from tbl_a) AND ID IN (select ID from tbl_b)

Also:

For ease of reading if you want to indicate the table names you can use the following:

SELECT tbl, ID, col
FROM
(
    SELECT
    tbl_a.ID, tbl_a.col, "name_to_display1" as "tbl" FROM tbl_a
    UNION ALL
    SELECT
    tbl_b.ID, tbl_b.col, "name_to_display2" as "tbl" FROM tbl_b
) t
WHERE ID IN (select ID from tbl_a) AND ID IN (select ID from tbl_b)
GROUP BY
ID, col
HAVING COUNT(*) = 1
 ORDER BY ID

I try to make the code a little bit understandable by naming the variables, I hope this can help

function getDistanceFromLatLonInKm(point1, point2) {

  const [lat1, lon1] = point1;
  const [lat2, lon2] = point2;
  const earthRadius = 6371;
  const dLat = convertDegToRad(lat2 - lat1);
  const dLon = convertDegToRad(lon2 - lon1);
  const squarehalfChordLength =
    Math.sin(dLat / 2) * Math.sin(dLat / 2) +
    Math.cos(convertDegToRad(lat1)) * Math.cos(convertDegToRad(lat2)) *
    Math.sin(dLon / 2) * Math.sin(dLon / 2);

  const angularDistance = 2 * Math.atan2(Math.sqrt(squarehalfChordLength), Math.sqrt(1 - squarehalfChordLength));
  const distance = earthRadius * angularDistance;
  return distance;

}

Simply convert int to NSString use :

  int x=10;

  NSString *strX=[NSString stringWithFormat:@"%d",x];

Dim MyString As String = "Hello World"
Dim YourString As String = "Hello World"
Console.WriteLine(String.Equals(MyString, YourString))

returns a bool True. This comparison is case-sensitive.

So in your example,

if String.Equals(string1, string2) and String.Equals(string3, string4) then
  ' do something
else
  ' do something else
end if

Try this:

Open PgAdmin -> Files -> Open pgpass.conf

You would get the path of pgpass.conf at the bottom of the window. Go to that location and open this file, you can find your password there.

Reference

If the above does not work, you may consider trying this:

 1. edit pg_hba.conf to allow trust authorization temporarily
 2. Reload the config file (pg_ctl reload)
 3. Connect and issue ALTER ROLE / PASSWORD to set the new password
 4. edit pg_hba.conf again and restore the previous settings
 5. Reload the config file again

Use it for correct result

$dom = new DOMDocument();
$dom->loadHTML('<meta http-equiv="Content-Type" content="text/html; charset=utf-8">' . $profile);
echo $dom->saveHTML();
echo $profile;

This operation

mb_convert_encoding($profile, 'HTML-ENTITIES', 'UTF-8');

It is bad way, because special symbols like &lt ; , &gt ; can be in $profile, and they will not convert twice after mb_convert_encoding. It is the hole for XSS and incorrect HTML.

Just to add to the conversation, I have found a more elegant way to change the color of the box plot by iterating over the dictionary of the object itself

import numpy as np
import matplotlib.pyplot as plt

def color_box(bp, color):

    # Define the elements to color. You can also add medians, fliers and means
    elements = ['boxes','caps','whiskers']

    # Iterate over each of the elements changing the color
    for elem in elements:
        [plt.setp(bp[elem][idx], color=color) for idx in xrange(len(bp[elem]))]
    return

a = np.random.uniform(0,10,[100,5])    

bp = plt.boxplot(a)
color_box(bp, 'red')

Cheers!

@ts-expect-error

TS 3.9 introduces a new magic comment. @ts-expect-error will:

• have same functionality as @ts-ignore
• trigger an error, if actually no compiler error has been suppressed (= indicates useless flag)

if (false) {
  // @ts-expect-error: Let's ignore a single compiler error like this unreachable code 
  console.log("hello"); // compiles
}

// If @ts-expect-error didn't suppress anything at all, we now get a nice warning 
let flag = true;
// ...
if (flag) {
  // @ts-expect-error
  // ^~~~~~~~~~~~~~~^ error: "Unused '@ts-expect-error' directive.(2578)"
  console.log("hello"); 
}

Alternatives

@ts-ignore and @ts-expect-error can be used for all sorts of compiler errors. For type issues (like in OP), I recommend one of the following alternatives due to narrower error suppression scope:

? Use any type

// type assertion for single expression
delete ($ as any).summernote.options.keyMap.pc.TAB;

// new variable assignment for multiple usages
const $$: any = $
delete $$.summernote.options.keyMap.pc.TAB;
delete $$.summernote.options.keyMap.mac.TAB;

? Augment JQueryStatic interface

// ./global.d.ts
interface JQueryStatic {
  summernote: any;
}

// ./main.ts
delete $.summernote.options.keyMap.pc.TAB; // works

In other cases, shorthand module declarations or module augmentations for modules with no/extendable types are handy utilities. A viable strategy is also to keep not migrated code in .js and use --allowJs with checkJs: false.

your mail.php on config you declare host as smtp.mailgun.org and port is 587 while on env is different. you need to change your mail.php to

'host' => env('MAIL_HOST', 'mailtrap.io'),

'port' => env('MAIL_PORT', 2525),

if you desire to use mailtrap.Then run

php artisan config:cache

In addition to John's answer, and reading up on Lodash (which I had hitherto regarded as a "me-too" to Underscore.js), and seeing the performance tests, reading the source-code, and blog posts, the few points which make Lodash much superior to Underscore.js are these:

1. It's not about the speed, as it is about consistency of speed (?)

If you look into Underscore.js's source-code, you'll see in the first few lines that Underscore.js falls-back on the native implementations of many functions. Although in an ideal world, this would have been a better approach, if you look at some of the performance links given in these slides, it is not hard to draw the conclusion that the quality of those 'native implementations' vary a lot browser-to-browser. Firefox is damn fast in some of the functions, and in some Chrome dominates. (I imagine there would be some scenarios where Internet Explorer would dominate too). I believe that it's better to prefer a code whose performance is more consistent across browsers.

Do read the blog post earlier, and instead of believing it for its sake, judge for yourself by running the benchmarks. I am stunned right now, seeing a Lodash performing 100-150% faster than Underscore.js in even simple, native functions such as Array.every in Chrome!

2. The extras in Lodash are also quite useful.
3. As for Xananax's highly upvoted comment suggesting contribution to Underscore.js's code: It's always better to have GOOD competition, not only does it keep innovation going, but also drives you to keep yourself (or your library) in good shape.

Here is a list of differences between Lodash, and it's Underscore.js build is a drop-in replacement for your Underscore.js projects.

I created a small working example that copies a source folder to another destination folder in just a few steps (based on shift66's answer using ncp):

Step 1 - Install ncp module:

npm install ncp --save

Step 2 - create copy.js (modify the srcPath and destPath variables to whatever you need):

var path = require('path');
var ncp = require('ncp').ncp;

ncp.limit = 16;

var srcPath = path.dirname(require.main.filename); // Current folder
var destPath = '/path/to/destination/folder'; // Any destination folder

console.log('Copying files...');
ncp(srcPath, destPath, function (err) {
  if (err) {
    return console.error(err);
  }
  console.log('Copying files complete.');
});

Step 3 - run

node copy.js

Typical format of a URI for ASP .NET MVC is Controller/Action/Id where Id is an integer

I would suggest sending the date value as a parameter rather than as part of the route:

 mysite/Controller/Action?date=21-9-2009 10:20

If it's still giving you problems the date may contain characters that are not allowed in a URI and need to be encoded. Check out:

 encodeURIComponent(yourstring)

It is a method within Javascript.

On the Server Side:

public ActionResult ActionName(string date)
{
     DateTime mydate;
     DateTime.Tryparse(date, out mydate);
}

FYI, any url parameter can be mapped to an action method parameter as long as the names are the same.

SELECT ...
SELECT SLEEP(5);
SELECT ...

But what are you using this for? Are you trying to circumvent/reinvent mutexes or transactions?

Code Snippet

#include<bits/stdc++.h>
using namespace std;


int main ()
{
    ios::sync_with_stdio(false);

    string str="String Convert\n";

    for(int i=0; i<str.size(); i++)
    {
      str[i] = tolower(str[i]);
    }
    cout<<str<<endl;

    return 0;
}

I got the way to remove a style attribute with pure JavaScript just to let you know the way of pure JavaScript

var bodyStyle = document.body.style;
if (bodyStyle.removeAttribute)
    bodyStyle.removeAttribute('background-color');
else        
    bodyStyle.removeProperty('background-color');

As simple as you can use const adults = family.filter(({ age }) => age > 18 );

const family =[{"name":"Jack",  "age": 26},_x000D_
              {"name":"Jill",  "age": 22},_x000D_
              {"name":"James", "age": 5 },_x000D_
              {"name":"Jenny", "age": 2 }];_x000D_
_x000D_
const adults = family.filter(({ age }) => age > 18 );_x000D_
_x000D_
console.log(adults)

I have a couple of clarifications to add here:

1) The list shown (visible-phone, visible-tablet, etc.) is deprecated in Bootstrap 3. The new values are:

• visible-xs-*
• visible-sm-*
• visible-md-*
• visible-lg-*
• hidden-xs-*
• hidden-sm-*
• hidden-md-*
• hidden-lg-*

The asterisk translates to the following for each (I show only visible-xs-* below):

• visible-xs-block
• visible-xs-inline
• visible-xs-inline-block

2) When you use these classes, you don't add a period in front (as confusingly shown in part of the answer above).

For example:

<div class="visible-md-block col-md-6 text-right text-muted">
   <h5>Copyright &copy; 2014 Jazimov</h5>
</div>

3) You can use visible-* and hidden-* (for example, visible-xs and hidden-xs) but these have been deprecated in Bootstrap 3.2.0.

For more details and the latest specs, go here and search for "visible": http://getbootstrap.com/css/

Yes, you would have to change the window.location.href to the url of the file you would want to download.

window.location.href = 'http://www.com/path/to/file';

Try this its working for me.

private static async Task<object> Upload(string actionUrl)
{
    Image newImage = Image.FromFile(@"Absolute Path of image");
    ImageConverter _imageConverter = new ImageConverter();
    byte[] paramFileStream= (byte[])_imageConverter.ConvertTo(newImage, typeof(byte[]));

    var formContent = new MultipartFormDataContent
    {
        // Send form text values here
        {new StringContent("value1"),"key1"},
        {new StringContent("value2"),"key2" },
        // Send Image Here
        {new StreamContent(new MemoryStream(paramFileStream)),"imagekey","filename.jpg"}
    };

    var myHttpClient = new HttpClient();
    var response = await myHttpClient.PostAsync(actionUrl.ToString(), formContent);
    string stringContent = await response.Content.ReadAsStringAsync();

    return response;
}

You can store a reference to that timeout, and then call clearTimeout on that reference.

// in the example above, assign the result
var timeoutHandle = window.setTimeout(...);

// in your click function, call clearTimeout
window.clearTimeout(timeoutHandle);

// then call setTimeout again to reset the timer
timeoutHandle = window.setTimeout(...);

First example: No multiple threads. Both execute in single (existing) thread. No thread creation.

R1 r1 = new R1();
R2 r2 = new R2();

r1 and r2 are just two different objects of classes that implement the Runnable interface and thus implement the run() method. When you call r1.run() you are executing it in the current thread.

Second example: Two separate threads.

Thread t1 = new Thread(r1);
Thread t2 = new Thread(r2);

t1 and t2 are objects of the class Thread. When you call t1.start(), it starts a new thread and calls the run() method of r1 internally to execute it within that new thread.

Mine was different again. I was setting the user-agent like so:

    NSString *jScript = @"var meta = document.createElement('meta'); meta.setAttribute('name', 'viewport'); meta.setAttribute('content', 'width=device-width'); document.getElementsByTagName('head')[0].appendChild(meta);";
    WKUserScript *wkUScript = [[WKUserScript alloc] initWithSource:jScript injectionTime:WKUserScriptInjectionTimeAtDocumentEnd forMainFrameOnly:YES];

This was causing something on the web page to freak out and leak memory. Not sure why but removing this sorted the issue for me.

You need to pass some data into it. An empty dictionary, for example.

if __name__ == '__main__': DHT('a').showData()

However, in your example a parameter is not even needed. You can declare it by just:

def __init__(self):

Maybe you mean to set it from the data?

class DHT:
    def __init__(self, data):
        self.data['one'] = data['one']
        self.data['two'] = data['two']
        self.data['three'] = data['three']
    def showData(self):
        print(self.data)

if __name__ == '__main__': DHT({'one':2, 'two':4, 'three':5}).showData()

showData will print the data you just entered.

Try this:

return Redirect("http://www.website.com");

Modification of a Collection while iterating through that Collection using an Iterator is not permitted by most of the Collection classes. The Java library calls an attempt to modify a Collection while iterating through it a "concurrent modification". That unfortunately suggests the only possible cause is simultaneous modification by multiple threads, but that is not so. Using only one thread it is possible to create an iterator for the Collection (using Collection.iterator(), or an enhanced for loop), start iterating (using Iterator.next(), or equivalently entering the body of the enhanced for loop), modify the Collection, then continue iterating.

To help programmers, some implementations of those Collection classes attempt to detect erroneous concurrent modification, and throw a ConcurrentModificationException if they detect it. However, it is in general not possible and practical to guarantee detection of all concurrent modifications. So erroneous use of the Collection does not always result in a thrown ConcurrentModificationException.

The documentation of ConcurrentModificationException says:

This exception may be thrown by methods that have detected concurrent modification of an object when such modification is not permissible...

Note that this exception does not always indicate that an object has been concurrently modified by a different thread. If a single thread issues a sequence of method invocations that violates the contract of an object, the object may throw this exception...

Note that fail-fast behavior cannot be guaranteed as it is, generally speaking, impossible to make any hard guarantees in the presence of unsynchronized concurrent modification. Fail-fast operations throw ConcurrentModificationException on a best-effort basis.

Note that

• the exception may be throw, not must be thrown
• different threads are not required
• throwing the exception cannot be guaranteed
• throwing the exception is on a best-effort basis
• throwing the exception happens when the concurrent modification is detected, not when it is caused

The documentation of the HashSet, HashMap, TreeSet and ArrayList classes says this:

The iterators returned [directly or indirectly from this class] are fail-fast: if the [collection] is modified at any time after the iterator is created, in any way except through the iterator's own remove method, the Iterator throws a ConcurrentModificationException. Thus, in the face of concurrent modification, the iterator fails quickly and cleanly, rather than risking arbitrary, non-deterministic behavior at an undetermined time in the future.

Note that the fail-fast behavior of an iterator cannot be guaranteed as it is, generally speaking, impossible to make any hard guarantees in the presence of unsynchronized concurrent modification. Fail-fast iterators throw ConcurrentModificationException on a best-effort basis. Therefore, it would be wrong to write a program that depended on this exception for its correctness: the fail-fast behavior of iterators should be used only to detect bugs.

Note again that the behaviour "cannot be guaranteed" and is only "on a best-effort basis".

The documentation of several methods of the Map interface say this:

Non-concurrent implementations should override this method and, on a best-effort basis, throw a ConcurrentModificationException if it is detected that the mapping function modifies this map during computation. Concurrent implementations should override this method and, on a best-effort basis, throw an IllegalStateException if it is detected that the mapping function modifies this map during computation and as a result computation would never complete.

Note again that only a "best-effort basis" is required for detection, and a ConcurrentModificationException is explicitly suggested only for the non concurrent (non thread-safe) classes.

Debugging ConcurrentModificationException

So, when you see a stack-trace due to a ConcurrentModificationException, you can not immediately assume that the cause is unsafe multi-threaded access to a Collection. You must examine the stack-trace to determine which class of Collection threw the exception (a method of the class will have directly or indirectly thrown it), and for which Collection object. Then you must examine from where that object can be modified.

• The most common cause is modification of the Collection within an enhanced for loop over the Collection. Just because you do not see an Iterator object in your source code does not mean there is no Iterator there! Fortunately, one of the statements of the faulty for loop will usually be in the stack-trace, so tracking down the error is usually easy.
• A trickier case is when your code passes around references to the Collection object. Note that unmodifiable views of collections (such as produced by Collections.unmodifiableList()) retain a reference to the modifiable collection, so iteration over an "unmodifiable" collection can throw the exception (the modification has been done elsewhere). Other views of your Collection, such as sub lists, Map entry sets and Map key sets also retain references to the original (modifiable) Collection. This can be a problem even for a thread-safe Collection, such as CopyOnWriteList; do not assume that thread-safe (concurrent) collections can never throw the exception.
• Which operations can modify a Collection can be unexpected in some cases. For example, LinkedHashMap.get() modifies its collection.
• The hardest cases are when the exception is due to concurrent modification by multiple threads.

Programming to prevent concurrent modification errors

When possible, confine all references to a Collection object, so its is easier to prevent concurrent modifications. Make the Collection a private object or a local variable, and do not return references to the Collection or its iterators from methods. It is then much easier to examine all the places where the Collection can be modified. If the Collection is to be used by multiple threads, it is then practical to ensure that the threads access the Collection only with appropriate synchonization and locking.

This simple filtering can be achieved in many ways with Python. The best approach is to use "list comprehensions" as follows:

>>> lst = ['a', 'ab', 'abc', 'bac']
>>> [k for k in lst if 'ab' in k]
['ab', 'abc']

Another way is to use the filter function. In Python 2:

>>> filter(lambda k: 'ab' in k, lst)
['ab', 'abc']

In Python 3, it returns an iterator instead of a list, but you can cast it:

>>> list(filter(lambda k: 'ab' in k, lst))
['ab', 'abc']

Though it's better practice to use a comprehension.

Here is the MySQL documentation on creating new user accounts.

In short, you create a user by running a CREATE USER statement:

CREATE USER "<username>" IDENTIFIED BY "<password>";

Once the user is created, you give him access to do things by using the GRANT statement.

pt is a derivation (abbreviation) of "point" which historically was used in print type faces where the size was commonly "measured" in "points" where 1 point has an approximate measurement of 1/72 of an inch, and thus a 72 point font would be 1 inch in size.

px is an abbreviation for "pixel" which is a simple "dot" on either a screen or a dot matrix printer or other printer or device which renders in a dot fashion - as opposed to old typewriters which had a fixed size, solid striker which left an imprint of the character by pressing on a ribbon, thus leaving an image of a fixed size.

Closely related to point are the terms "uppercase" and "lowercase" which historically had to do with the selection of the fixed typographical characters where the "captital" characters where placed in a box (case) above the non-captitalized characters which were place in a box below, and thus the "lower" case.

There were different boxes (cases) for different typographical fonts and sizes, but still and "upper" and "lower" case for each of those.

Another term is the "pica" which is a measure of one character in the font, thus a pica is 1/6 of an inch or 12 point units of measure (12/72) of measure.

Strickly speaking the measurement is on computers 4.233mm or 0.166in whereas the old point (American) is 1/72.27 of an inch and French is 4.512mm (0.177in.). Thus my statement of "approximate" regarding the measurements.

Further, typewriters as used in offices, had either and "Elite" or a "Pica" size where the size was 10 and 12 characters per inch repectivly.

Additionally, the "point", prior to standardization was based on the metal typographers "foot" size, the size of the basic footprint of one character, and varied somewhat in size.

Note that a typographical "foot" was originally from a deceased printers actual foot. A typographic foot contains 72 picas or 864 points.

As to CSS use, I prefer to use EM rather than px or pt, thus gaining the advantage of scaling without loss of relative location and size.

EDIT: Just for completeness you can think of EM (em) as an element of measure of one font height, thus 1em for a 12pt font would be the height of that font and 2em would be twice that height. Note that for a 12px font, 2em is 24 pixels. SO 10px is typically 0.63em of a standard font as "most" browsers base on 16px = 1em as a standard font size.

It can happen for a lot of reasons, but probably for an invalid char, so you can use JSON.stringify(obj); that will turn your object into a JSON but remember that it is a JQUERY expression.

Make sure these two requirements are satisfied:

1. Enable annotation processing,

   Preferences > Build, Execution, Deployment > Compiler > Annotation Processors > Enable annotation processing

2. Lombok plugin is installed and enabled for your project.

If you are sending multiple objects, it's often simplest to put them some kind of holder/collection like an Object[] or List. It saves you having to explicitly check for end of stream and takes care of transmitting explicitly how many objects are in the stream.

EDIT: Now that I formatted the code, I see you already have the messages in an array. Simply write the array to the object stream, and read the array on the server side.

Your "server read method" is only reading one object. If it is called multiple times, you will get an error since it is trying to open several object streams from the same input stream. This will not work, since all objects were written to the same object stream on the client side, so you have to mirror this arrangement on the server side. That is, use one object input stream and read multiple objects from that.

(The error you get is because the objectOutputStream writes a header, which is expected by objectIutputStream. As you are not writing multiple streams, but simply multiple objects, then the next objectInputStream created on the socket input fails to find a second header, and throws an exception.)

To fix it, create the objectInputStream when you accept the socket connection. Pass this objectInputStream to your server read method and read Object from that.

Here is the answer to the question here

Actually we have to get it from the sharable ContentProvider of Camera Application.

EDIT . Copying answer that worked for me

private String getRealPathFromURI(Uri contentUri) {
String[] proj = { MediaStore.Images.Media.DATA };
CursorLoader loader = new CursorLoader(mContext, contentUri, proj, null, null, null);
Cursor cursor = loader.loadInBackground();
int column_index = cursor.getColumnIndexOrThrow(MediaStore.Images.Media.DATA);
cursor.moveToFirst();
String result = cursor.getString(column_index);
cursor.close();
return result;

}

You could also use =COUNTA(A1:A200) which requires no conditions.

From Google Support:

COUNTA counts all values in a dataset, including those which appear more than once and text values (including zero-length strings and whitespace). To count unique values, use COUNTUNIQUE.

The answers are fine, but with Swift 4 you could simplify your code a bit:

let text = "Test string"
let substring = "string"

let substringRange = text.range(of: substring)!
let nsRange = NSRange(substringRange, in: text)

Be cautious, as the result of range function has to be unwrapped.

You could do this with an INSTEAD OF INSERT trigger on the table, that checks for the existance of the row and then updates/inserts depending on whether it exists already. There is an example of how to do this for SQL Server 2000+ on MSDN here:

CREATE TRIGGER IO_Trig_INS_Employee ON Employee
INSTEAD OF INSERT
AS
BEGIN
SET NOCOUNT ON
-- Check for duplicate Person. If no duplicate, do an insert.
IF (NOT EXISTS (SELECT P.SSN
      FROM Person P, inserted I
      WHERE P.SSN = I.SSN))
   INSERT INTO Person
      SELECT SSN,Name,Address,Birthdate
      FROM inserted
ELSE
-- Log attempt to insert duplicate Person row in PersonDuplicates table.
   INSERT INTO PersonDuplicates
      SELECT SSN,Name,Address,Birthdate,SUSER_SNAME(),GETDATE()
      FROM inserted
-- Check for duplicate Employee. If no duplicate, do an insert.
IF (NOT EXISTS (SELECT E.SSN
      FROM EmployeeTable E, inserted
      WHERE E.SSN = inserted.SSN))
   INSERT INTO EmployeeTable
      SELECT EmployeeID,SSN, Department, Salary
      FROM inserted
ELSE
--If duplicate, change to UPDATE so that there will not
--be a duplicate key violation error.
   UPDATE EmployeeTable
      SET EmployeeID = I.EmployeeID,
          Department = I.Department,
          Salary = I.Salary
   FROM EmployeeTable E, inserted I
   WHERE E.SSN = I.SSN
END

This is the complex (curly) syntax for string interpolation. From the manual:

Complex (curly) syntax

This isn't called complex because the syntax is complex, but because it allows for the use of complex expressions.

Any scalar variable, array element or object property with a string representation can be included via this syntax. Simply write the expression the same way as it would appear outside the string, and then wrap it in { and }. Since { can not be escaped, this syntax will only be recognised when the $ immediately follows the {. Use {\$ to get a literal {$. Some examples to make it clear:

<?php
// Show all errors
error_reporting(E_ALL);

$great = 'fantastic';

// Won't work, outputs: This is { fantastic}
echo "This is { $great}";

// Works, outputs: This is fantastic
echo "This is {$great}";
echo "This is ${great}";

// Works
echo "This square is {$square->width}00 centimeters broad."; 


// Works, quoted keys only work using the curly brace syntax
echo "This works: {$arr['key']}";


// Works
echo "This works: {$arr[4][3]}";

// This is wrong for the same reason as $foo[bar] is wrong  outside a string.
// In other words, it will still work, but only because PHP first looks for a
// constant named foo; an error of level E_NOTICE (undefined constant) will be
// thrown.
echo "This is wrong: {$arr[foo][3]}"; 

// Works. When using multi-dimensional arrays, always use braces around arrays
// when inside of strings
echo "This works: {$arr['foo'][3]}";

// Works.
echo "This works: " . $arr['foo'][3];

echo "This works too: {$obj->values[3]->name}";

echo "This is the value of the var named $name: {${$name}}";

echo "This is the value of the var named by the return value of getName(): {${getName()}}";

echo "This is the value of the var named by the return value of \$object->getName(): {${$object->getName()}}";

// Won't work, outputs: This is the return value of getName(): {getName()}
echo "This is the return value of getName(): {getName()}";
?>

Often, this syntax is unnecessary. For example, this:

$a = 'abcd';
$out = "$a $a"; // "abcd abcd";

behaves exactly the same as this:

$out = "{$a} {$a}"; // same

So the curly braces are unnecessary. But this:

$out = "$aefgh";

will, depending on your error level, either not work or produce an error because there's no variable named $aefgh, so you need to do:

$out = "${a}efgh"; // or
$out = "{$a}efgh";

I guess you hate to write more selectors and divide them by a comma?

.registration_form_right input:not([type="radio"]),  
.registration_form_right input:not([type="checkbox"])  
{  
}

and BTW this

not([type="radio" && type="checkbox"])  

looks to me more like "input which does not have both these types" :)

It is not an issue it is because of caching...

To overcome this add a timestamp to your endpoint call, e.g. axios.get('/api/products').

After timestamp it should be axios.get(/api/products?${Date.now()}.

It will resolve your 304 status code.

Instead of using local imports, you may import the entire module instead of the particular object. Then, in your app module, call mod_login.mod_login

app.py

from flask import Flask
import mod_login

# ...

do_stuff_with(mod_login.mod_login)

mod_login.py

from app import app

mod_login = something

I had the same problem while I was testing a project and it turned that running Fiddler was the cause for this error..!!

If you are using Fiddler to intercept the http request, shut it down ...

This is one of the many causes for such error.

To fix Fiddler you may need to Reset Fiddler Https Certificates.

I needed to replace white space in a string with spaces, but not duplicate spaces. e.g., I needed to convert something like the following:

"a b   c\r\n d\t\t\t e"

to

"a b c d e"

I used the following method

private static string RemoveWhiteSpace(string value)
{
    if (value == null) { return null; }
    var sb = new StringBuilder();

    var lastCharWs = false;
    foreach (var c in value)
    {
        if (char.IsWhiteSpace(c))
        {
            if (lastCharWs) { continue; }
            sb.Append(' ');
            lastCharWs = true;
        }
        else
        {
            sb.Append(c);
            lastCharWs = false;
        }
    }
    return sb.ToString();
}

Try this :

function method1(){
   // some code

}

function method2(){
   // some code
}

$.ajax({
   url:method1(),
   success:function(){
   method2();
}
})

You could use SqlMethods.Like(matchExpression,pattern)

var results = from c in db.costumers
              where SqlMethods.Like(c.FullName, "%"+FirstName+"%,"+LastName)
              select c;

The use of this method outside of LINQ to SQL will always throw a NotSupportedException exception.

var xInt = parseInt(x)

This will return either the integer value, or NaN.

Read more about parseInt here.

Yes,

int x=5;
System.out.println(++x);

will print 6 and

int x=5;
System.out.println(x++);

will print 5.

//this is updated version of code that i posted /* The isValidName Method will check whether the name passed as argument should not contain- 1.null value or space 2.any special character 3.Digits (0-9) Explanation--- Here str2 is String array variable which stores the the splited string of name that is passed as argument The count variable will count the number of special character occurs The method will return true if it satisfy all the condition */

public boolean isValidName(String name)
{
    String specialCharacters=" !#$%&'()*+,-./:;<=>?@[]^_`{|}~0123456789";
    String str2[]=name.split("");
    int count=0;
    for (int i=0;i<str2.length;i++)
    {
        if (specialCharacters.contains(str2[i]))
        {
            count++;
        }
    }       

    if (name!=null && count==0 )
    {
        return true;
    }
    else
    {
        return false;
    }
}

On the off chance it may help others I'll share a related anecdote.

I encountered this exact error (Invalid UTF-8 middle byte 0x3f) running a PowerShell script via the PowerShell Integrated Script Environment (ISE). The identical script, executed outside the ISE, works fine. The code uses the Confluence v3 and v5.x REST APIs and this error is logged on the Confluence v5.x server - presumably because the ISE somehow mucks with the request.

The datepicker('setDate') sets the date in the datepicket not in the input.

You should add the date and set it in the input.

var date2 = $('.pickupDate').datepicker('getDate');
var nextDayDate = new Date();
nextDayDate.setDate(date2.getDate() + 1);
$('input').val(nextDayDate);