On your own system, try

install.packages("foo", dependencies=...)

with the dependencies= argument is documented as

dependencies: logical indicating to also install uninstalled packages
      which these packages depend on/link to/import/suggest (and so
      on recursively).  Not used if ‘repos = NULL’.  Can also be a
      character vector, a subset of ‘c("Depends", "Imports",
      "LinkingTo", "Suggests", "Enhances")’.

      Only supported if ‘lib’ is of length one (or missing), so it
      is unambiguous where to install the dependent packages.  If
      this is not the case it is ignored, with a warning.

      The default, ‘NA’, means ‘c("Depends", "Imports",
      "LinkingTo")’.

      ‘TRUE’ means (as from R 2.15.0) to use ‘c("Depends",
      "Imports", "LinkingTo", "Suggests")’ for ‘pkgs’ and
      ‘c("Depends", "Imports", "LinkingTo")’ for added
      dependencies: this installs all the packages needed to run
      ‘pkgs’, their examples, tests and vignettes (if the package
      author specified them correctly).

so you probably want a value TRUE.

In your package, list what is needed in Depends:, see the Writing R Extensions manual which is pretty clear on this.

Breadth first is a queue, depth first is a stack.

For breadth first, add all children to the queue, then pull the head and do a breadth first search on it, using the same queue.

For depth first, add all children to the stack, then pop and do a depth first on that node, using the same stack.

Introduction

Hi

I was asked this question today in class, and it is a good question! I will explain here and hopefully get my more formal answer reviewed or corrected where it is wrong. :)

Previous Answers

The observation by @Assaf is also correct since binary tree traversal travels recursively to visit each node once.

But!, since it is a recursive algorithm, you often have to use more advanced methods to analyze run-time performance. When dealing with a sequential algorithm or one that uses for-loops, using summations will often be enough. So, what follows is a more detailed explanation of this analysis for those who are curious.

The Recurrence

As previously stated,

T(n) = 2*T(n/2) + 1

where T(n) is the number of operations executed in your traversal algorithm (in-order, pre-order, or post-order makes no difference.

Explanation of the Recurrence

There are two T(n) because inorder, preorder, and postorder traversals all call themselves on the left and right child node. So, think of each recursive call as a T(n). In other words, **left T(n/2) + right T(n/2) = 2 T(n/2) **. The "1" comes from any other constant time operations within the function, like printing the node value, et cetera. (It could honestly be a 1 or any constant number & the asymptotic run-time still computes to the same value. Explanation follows.).

Analysis

This recurrence actually can be analyzed using big theta using the masters' theorem. So, I will apply it here.

T(n) = 2*T(n/2) + constant

where constant is some constant (could be 1 or any other constant).

Using the Masters' Theorem , we have T(n) = a*T(n/b) + f(n).

So, a=2, b=2, f(n) = constant since f(n) = n^c = 1, then it follows that c = 0 since f(n) is a constant.

From here, we can see that a = 2 and b^c = 2 ^0 = 1. So, a>b^c or 2>2^0. So, c < logb(a) or 0 < log2(2)

From here we have T(n) = BigTheta(n^{logb(a)}) = BigTheta(n^1) = BigTheta(n)

If your not famliar with BigTheta(n), it is "similar" ( please bear with me :) ) to O(n) but it is a "tighter bound" or tighter approximation of the run-time. So, BigTheta(n) is both worst-case O(n), and best-case BigOmega(n) run-time.

I hope this helps. Take care.

You can use iterative inorder traversal: http://en.wikipedia.org/wiki/Tree_traversal#Iterative_Traversal with a simple check for kth element after poping a node out of the stack.

public class LeastCommonAncestor {

    private TreeNode root;

    private static class TreeNode {
        TreeNode left;
        TreeNode right;
        int item;

        TreeNode (TreeNode left, TreeNode right, int item) {
            this.left = left;
            this.right = right;
            this.item = item;
        }
    }

    public void createBinaryTree (Integer[] arr) {
        if (arr == null)  {
            throw new NullPointerException("The input array is null.");
        }

        root = new TreeNode(null, null, arr[0]);

        final Queue<TreeNode> queue = new LinkedList<TreeNode>();
        queue.add(root);

        final int half = arr.length / 2;

        for (int i = 0; i < half; i++) {
            if (arr[i] != null) {
                final TreeNode current = queue.poll();
                final int left = 2 * i + 1;
                final int right = 2 * i + 2;

                if (arr[left] != null) {
                    current.left = new TreeNode(null, null, arr[left]);
                    queue.add(current.left);
                }
                if (right < arr.length && arr[right] != null) {
                    current.right = new TreeNode(null, null, arr[right]);
                    queue.add(current.right);
                }
            }
        }
    }

    private static class LCAData {
        TreeNode lca;
        int count;

        public LCAData(TreeNode parent, int count) {
            this.lca = parent;
            this.count = count;
        }
    }


    public int leastCommonAncestor(int n1, int n2) {
        if (root == null) {
            throw new NoSuchElementException("The tree is empty.");
        }

        LCAData lcaData = new LCAData(null, 0);
       // foundMatch (root, lcaData, n1,  n2);

        /**
         * QQ: boolean was returned but never used by caller.
         */
        foundMatchAndDuplicate (root, lcaData, n1,  n2, new HashSet<Integer>());

        if (lcaData.lca != null) {
            return lcaData.lca.item;
        } else {
            /**
             * QQ: Illegal thrown after processing function.
             */
            throw new IllegalArgumentException("The tree does not contain either one or more of input data. ");
        }
    }

//    /**
//     * Duplicate n1, n1         Duplicate in Tree
//     *      x                           x               => succeeds
//     *      x                           1               => fails.
//     *      1                           x               => succeeds by throwing exception
//     *      1                           1               => succeeds
//     */
//    private boolean foundMatch (TreeNode node, LCAData lcaData, int n1, int n2) {
//        if (node == null) {
//            return false;
//        }
//
//        if (lcaData.count == 2) {
//            return false;
//        }
//
//        if ((node.item == n1 || node.item == n2) && lcaData.count == 1) {
//            lcaData.count++;
//            return true;
//        }
//
//        boolean foundInCurrent = false;
//        if (node.item == n1 || node.item == n2) {
//            lcaData.count++;
//            foundInCurrent = true;
//        }
//
//        boolean foundInLeft = foundMatch(node.left, lcaData, n1, n2);
//        boolean foundInRight = foundMatch(node.right, lcaData, n1, n2);
//
//        if ((foundInLeft && foundInRight) || (foundInCurrent && foundInRight) || (foundInCurrent && foundInLeft)) {
//            lcaData.lca = node;
//            return true; 
//        }
//        return foundInCurrent || (foundInLeft || foundInRight);
//    }


    private boolean foundMatchAndDuplicate (TreeNode node, LCAData lcaData, int n1, int n2, Set<Integer> set) {
        if (node == null) {
            return false;
        }

        // when both were found
        if (lcaData.count == 2) {
            return false;
        }

        // when only one of them is found
        if ((node.item == n1 || node.item == n2) && lcaData.count == 1) {
            if (!set.contains(node.item)) {
                lcaData.count++;
                return true;
            }
        }

        boolean foundInCurrent = false;  
        // when nothing was found (count == 0), or a duplicate was found (count == 1)
        if (node.item == n1 || node.item == n2) {
            if (!set.contains(node.item)) {
                set.add(node.item);
                lcaData.count++;
            }
            foundInCurrent = true;
        }

        boolean foundInLeft = foundMatchAndDuplicate(node.left, lcaData, n1, n2, set);
        boolean foundInRight = foundMatchAndDuplicate(node.right, lcaData, n1, n2, set);

        if (((foundInLeft && foundInRight) || 
                (foundInCurrent && foundInRight) || 
                    (foundInCurrent && foundInLeft)) &&
                        lcaData.lca == null) {
            lcaData.lca = node;
            return true; 
        }
        return foundInCurrent || (foundInLeft || foundInRight);
    }




    public static void main(String args[]) {
        /**
         * Binary tree with unique values.
         */
        Integer[] arr1 = {1, 2, 3, 4, null, 6, 7, 8, null, null, null, null, 9};
        LeastCommonAncestor commonAncestor = new LeastCommonAncestor();
        commonAncestor.createBinaryTree(arr1);

        int ancestor = commonAncestor.leastCommonAncestor(2, 4);
        System.out.println("Expected 2, actual " + ancestor);

        ancestor = commonAncestor.leastCommonAncestor(2, 7);
        System.out.println("Expected 1, actual " +ancestor);

        ancestor = commonAncestor.leastCommonAncestor(2, 6);
        System.out.println("Expected 1, actual " + ancestor);

        ancestor = commonAncestor.leastCommonAncestor(2, 1);
        System.out.println("Expected 1, actual " +ancestor);

        ancestor = commonAncestor.leastCommonAncestor(3, 8);
        System.out.println("Expected 1, actual " +ancestor);

        ancestor = commonAncestor.leastCommonAncestor(7, 9);
        System.out.println("Expected 3, actual " +ancestor);

        // duplicate request 
        try {
            ancestor = commonAncestor.leastCommonAncestor(7, 7);
        } catch (Exception e) {
            System.out.println("expected exception");
        }

        /**
         * Binary tree with duplicate values.
         */
        Integer[] arr2 = {1, 2, 8, 4, null, 6, 7, 8, null, null, null, null, 9};
        commonAncestor = new LeastCommonAncestor();
        commonAncestor.createBinaryTree(arr2);

        // duplicate requested
        ancestor = commonAncestor.leastCommonAncestor(8, 8);
        System.out.println("Expected 1, actual " + ancestor);

        ancestor = commonAncestor.leastCommonAncestor(4, 8);
        System.out.println("Expected 4, actual " +ancestor);

        ancestor = commonAncestor.leastCommonAncestor(7, 8);
        System.out.println("Expected 8, actual " +ancestor);

        ancestor = commonAncestor.leastCommonAncestor(2, 6);
        System.out.println("Expected 1, actual " + ancestor);

         ancestor = commonAncestor.leastCommonAncestor(8, 9);  
        System.out.println("Expected 8, actual " +ancestor); // failed.
    }
}

You need to do the combination of Kristo's answer and MSN's:

// Note: Using the pre-increment operator is preferred for iterators because
//       there can be a performance gain.
//
// Note: As long as you are iterating from beginning to end, without inserting
//       along the way you can safely save end once; otherwise get it at the
//       top of each loop.

std::list< item * >::iterator iter = items.begin();
std::list< item * >::iterator end  = items.end();

while (iter != end)
{
    item * pItem = *iter;

    if (pItem->update() == true)
    {
        other_code_involving(pItem);
        ++iter;
    }
    else
    {
        // BTW, who is deleting pItem, a.k.a. (*iter)?
        iter = items.erase(iter);
    }
}

Of course, the most efficient and SuperCool® STL savy thing would be something like this:

// This implementation of update executes other_code_involving(Item *) if
// this instance needs updating.
//
// This method returns true if this still needs future updates.
//
bool Item::update(void)
{
    if (m_needsUpdates == true)
    {
        m_needsUpdates = other_code_involving(this);
    }

    return (m_needsUpdates);
}

// This call does everything the previous loop did!!! (Including the fact
// that it isn't deleting the items that are erased!)
items.remove_if(std::not1(std::mem_fun(&Item::update)));

The solution i'm using is as follows and allows you to set the active class per php page.

Give each of your menu items a unique class, i use .nav-x (nav-about, here).

<li class="nav-item nav-about"> <a class="nav-link" href="about.php">About</a> </li>

At the top of each page (about.php here):

<!-- Navbar Active Class -->
<?php $activeClass = '.nav-about > a'; ?>

Elsewhere (header.php / index.php):

<style>
<?php echo $activeClass; ?> {
    color: #fff !important;
}
</style>

Simply change the .nav-about > a per page, .nav-forum > a, for example.

If you want different styling (colors etc) for each nav item, just attach the inline styling to that page instead of the index / header page.

The code from Alex works great. Just note that when you use request.getParameter you must use a request dispatcher

//Pass results back to the client
RequestDispatcher dispatcher =   getServletContext().getRequestDispatcher("TestPages/ServiceServlet.jsp");
dispatcher.forward(request, response);

After the configure step you probably have a makefile. Inside this makefile look for CFLAGS (or similar). puf -fPIC at the end and run make again. In other words -fPIC is a compiler option that has to be passed to the compiler somewhere.

You can't do that for a dynamically allocated array (or a pointer). For static arrays, you can use sizeof(array) to get the whole array size in bytes and divide it by the size of each element:

#define COUNTOF(x) (sizeof(x)/sizeof(*x))

To get the size of a dynamic array, you have to keep track of it manually and pass it around with it, or terminate it with a sentinel value (like '\0' in null terminated strings).

Update: I realized that your question is tagged C++ and not C. You should definitely consider using std::vector instead of arrays in C++ if you want to pass things around:

std::vector<int> v;
v.push_back(1);
v.push_back(2);
std::cout << v.size() << std::endl; // prints 2

git reset --hard <tag/branch/commit id>

Notes:

• git reset without the --hard option resets the commit history, but not the files. With the --hard option the files in working tree are also reset. (credited user)

• If you wish to commit that state so that the remote repository also points to the rolled back commit do: git push <reponame> -f (credited user)

I think that you need to step back and think about what a map, or associative array, really is. All it is is a way to store a value for a given key, and get that value back quickly and efficiently. You may also want to be able to iterate over the keys to retrieve every key value pair, or delete keys and their associated values.

Now, think about a data structure you use all the time in shell scripting, and even just in the shell without writing a script, that has these properties. Stumped? It's the filesystem.

Really, all you need to have an associative array in shell programming is a temp directory. mktemp -d is your associative array constructor:

prefix=$(basename -- "$0")
map=$(mktemp -dt ${prefix})
echo >${map}/key somevalue
value=$(cat ${map}/key)

If you don't feel like using echo and cat, you can always write some little wrappers; these ones are modelled off of Irfan's, though they just output the value rather than setting arbitrary variables like $value:

#!/bin/sh

prefix=$(basename -- "$0")
mapdir=$(mktemp -dt ${prefix})
trap 'rm -r ${mapdir}' EXIT

put() {
  [ "$#" != 3 ] && exit 1
  mapname=$1; key=$2; value=$3
  [ -d "${mapdir}/${mapname}" ] || mkdir "${mapdir}/${mapname}"
  echo $value >"${mapdir}/${mapname}/${key}"
}

get() {
  [ "$#" != 2 ] && exit 1
  mapname=$1; key=$2
  cat "${mapdir}/${mapname}/${key}"
}

put "newMap" "name" "Irfan Zulfiqar"
put "newMap" "designation" "SSE"
put "newMap" "company" "My Own Company"

value=$(get "newMap" "company")
echo $value

value=$(get "newMap" "name")
echo $value

edit: This approach is actually quite a bit faster than the linear search using sed suggested by the questioner, as well as more robust (it allows keys and values to contain -, =, space, qnd ":SP:"). The fact that it uses the filesystem does not make it slow; these files are actually never guaranteed to be written to the disk unless you call sync; for temporary files like this with a short lifetime, it's not unlikely that many of them will never be written to disk.

I did a few benchmarks of Irfan's code, Jerry's modification of Irfan's code, and my code, using the following driver program:

#!/bin/sh

mapimpl=$1
numkeys=$2
numvals=$3

. ./${mapimpl}.sh    #/ <- fix broken stack overflow syntax highlighting

for (( i = 0 ; $i < $numkeys ; i += 1 ))
do
    for (( j = 0 ; $j < $numvals ; j += 1 ))
    do
        put "newMap" "key$i" "value$j"
        get "newMap" "key$i"
    done
done

The results:

    $ time ./driver.sh irfan 10 5

    real    0m0.975s
    user    0m0.280s
    sys     0m0.691s

    $ time ./driver.sh brian 10 5

    real    0m0.226s
    user    0m0.057s
    sys     0m0.123s

    $ time ./driver.sh jerry 10 5

    real    0m0.706s
    user    0m0.228s
    sys     0m0.530s

    $ time ./driver.sh irfan 100 5

    real    0m10.633s
    user    0m4.366s
    sys     0m7.127s

    $ time ./driver.sh brian 100 5

    real    0m1.682s
    user    0m0.546s
    sys     0m1.082s

    $ time ./driver.sh jerry 100 5

    real    0m9.315s
    user    0m4.565s
    sys     0m5.446s

    $ time ./driver.sh irfan 10 500

    real    1m46.197s
    user    0m44.869s
    sys     1m12.282s

    $ time ./driver.sh brian 10 500

    real    0m16.003s
    user    0m5.135s
    sys     0m10.396s

    $ time ./driver.sh jerry 10 500

    real    1m24.414s
    user    0m39.696s
    sys     0m54.834s

    $ time ./driver.sh irfan 1000 5

    real    4m25.145s
    user    3m17.286s
    sys     1m21.490s

    $ time ./driver.sh brian 1000 5

    real    0m19.442s
    user    0m5.287s
    sys     0m10.751s

    $ time ./driver.sh jerry 1000 5

    real    5m29.136s
    user    4m48.926s
    sys     0m59.336s

Found a very hacky solution to this problem, but it works. I added a class to the link that is used to open the modal (With the data-target), then using Jquery, added a click event to that class that gets the data-target, finds the modal it is supposed to open, and then opens it via Javascript. Works just fine for me. I also added a mobile check on mine so that it only runs on mobile, but that's not required.

$('.forceOpen').click(function() {
  var id = $(this).attr('data-target');
  $('.modal').modal('hide');
  $(id).modal('show');
});

I made the connection using a different approach:

BasicAWSCredentials credentials = new BasicAWSCredentials(ACCESS_KEY, SECRET_KEY);
AmazonDynamoDBClient client = new AmazonDynamoDBClient(credentials).withRegion(Regions.US_EAST_1);
DynamoDB dynamoDB = new DynamoDB(client);

The access key and the secret key can be created in the Identity and Access Management console. I hope it helps...

All of the answers to this question are wrong in one way or another.

Wrong answer #1

IFS=', ' read -r -a array <<< "$string"

1: This is a misuse of $IFS. The value of the $IFS variable is not taken as a single variable-length string separator, rather it is taken as a set of single-character string separators, where each field that read splits off from the input line can be terminated by any character in the set (comma or space, in this example).

Actually, for the real sticklers out there, the full meaning of $IFS is slightly more involved. From the bash manual:

The shell treats each character of IFS as a delimiter, and splits the results of the other expansions into words using these characters as field terminators. If IFS is unset, or its value is exactly <space><tab><newline>, the default, then sequences of <space>, <tab>, and <newline> at the beginning and end of the results of the previous expansions are ignored, and any sequence of IFS characters not at the beginning or end serves to delimit words. If IFS has a value other than the default, then sequences of the whitespace characters <space>, <tab>, and <newline> are ignored at the beginning and end of the word, as long as the whitespace character is in the value of IFS (an IFS whitespace character). Any character in IFS that is not IFS whitespace, along with any adjacent IFS whitespace characters, delimits a field. A sequence of IFS whitespace characters is also treated as a delimiter. If the value of IFS is null, no word splitting occurs.

Basically, for non-default non-null values of $IFS, fields can be separated with either (1) a sequence of one or more characters that are all from the set of "IFS whitespace characters" (that is, whichever of <space>, <tab>, and <newline> ("newline" meaning line feed (LF)) are present anywhere in $IFS), or (2) any non-"IFS whitespace character" that's present in $IFS along with whatever "IFS whitespace characters" surround it in the input line.

For the OP, it's possible that the second separation mode I described in the previous paragraph is exactly what he wants for his input string, but we can be pretty confident that the first separation mode I described is not correct at all. For example, what if his input string was 'Los Angeles, United States, North America'?

IFS=', ' read -ra a <<<'Los Angeles, United States, North America'; declare -p a;
## declare -a a=([0]="Los" [1]="Angeles" [2]="United" [3]="States" [4]="North" [5]="America")

2: Even if you were to use this solution with a single-character separator (such as a comma by itself, that is, with no following space or other baggage), if the value of the $string variable happens to contain any LFs, then read will stop processing once it encounters the first LF. The read builtin only processes one line per invocation. This is true even if you are piping or redirecting input only to the read statement, as we are doing in this example with the here-string mechanism, and thus unprocessed input is guaranteed to be lost. The code that powers the read builtin has no knowledge of the data flow within its containing command structure.

You could argue that this is unlikely to cause a problem, but still, it's a subtle hazard that should be avoided if possible. It is caused by the fact that the read builtin actually does two levels of input splitting: first into lines, then into fields. Since the OP only wants one level of splitting, this usage of the read builtin is not appropriate, and we should avoid it.

3: A non-obvious potential issue with this solution is that read always drops the trailing field if it is empty, although it preserves empty fields otherwise. Here's a demo:

string=', , a, , b, c, , , '; IFS=', ' read -ra a <<<"$string"; declare -p a;
## declare -a a=([0]="" [1]="" [2]="a" [3]="" [4]="b" [5]="c" [6]="" [7]="")

Maybe the OP wouldn't care about this, but it's still a limitation worth knowing about. It reduces the robustness and generality of the solution.

This problem can be solved by appending a dummy trailing delimiter to the input string just prior to feeding it to read, as I will demonstrate later.

Wrong answer #2

string="1:2:3:4:5"
set -f                     # avoid globbing (expansion of *).
array=(${string//:/ })

Similar idea:

t="one,two,three"
a=($(echo $t | tr ',' "\n"))

(Note: I added the missing parentheses around the command substitution which the answerer seems to have omitted.)

Similar idea:

string="1,2,3,4"
array=(`echo $string | sed 's/,/\n/g'`)

These solutions leverage word splitting in an array assignment to split the string into fields. Funnily enough, just like read, general word splitting also uses the $IFS special variable, although in this case it is implied that it is set to its default value of <space><tab><newline>, and therefore any sequence of one or more IFS characters (which are all whitespace characters now) is considered to be a field delimiter.

This solves the problem of two levels of splitting committed by read, since word splitting by itself constitutes only one level of splitting. But just as before, the problem here is that the individual fields in the input string can already contain $IFS characters, and thus they would be improperly split during the word splitting operation. This happens to not be the case for any of the sample input strings provided by these answerers (how convenient...), but of course that doesn't change the fact that any code base that used this idiom would then run the risk of blowing up if this assumption were ever violated at some point down the line. Once again, consider my counterexample of 'Los Angeles, United States, North America' (or 'Los Angeles:United States:North America').

Also, word splitting is normally followed by filename expansion (aka pathname expansion aka globbing), which, if done, would potentially corrupt words containing the characters *, ?, or [ followed by ] (and, if extglob is set, parenthesized fragments preceded by ?, *, +, @, or !) by matching them against file system objects and expanding the words ("globs") accordingly. The first of these three answerers has cleverly undercut this problem by running set -f beforehand to disable globbing. Technically this works (although you should probably add set +f afterward to reenable globbing for subsequent code which may depend on it), but it's undesirable to have to mess with global shell settings in order to hack a basic string-to-array parsing operation in local code.

Another issue with this answer is that all empty fields will be lost. This may or may not be a problem, depending on the application.

Note: If you're going to use this solution, it's better to use the ${string//:/ } "pattern substitution" form of parameter expansion, rather than going to the trouble of invoking a command substitution (which forks the shell), starting up a pipeline, and running an external executable (tr or sed), since parameter expansion is purely a shell-internal operation. (Also, for the tr and sed solutions, the input variable should be double-quoted inside the command substitution; otherwise word splitting would take effect in the echo command and potentially mess with the field values. Also, the $(...) form of command substitution is preferable to the old `...` form since it simplifies nesting of command substitutions and allows for better syntax highlighting by text editors.)

Wrong answer #3

str="a, b, c, d"  # assuming there is a space after ',' as in Q
arr=(${str//,/})  # delete all occurrences of ','

This answer is almost the same as #2. The difference is that the answerer has made the assumption that the fields are delimited by two characters, one of which being represented in the default $IFS, and the other not. He has solved this rather specific case by removing the non-IFS-represented character using a pattern substitution expansion and then using word splitting to split the fields on the surviving IFS-represented delimiter character.

This is not a very generic solution. Furthermore, it can be argued that the comma is really the "primary" delimiter character here, and that stripping it and then depending on the space character for field splitting is simply wrong. Once again, consider my counterexample: 'Los Angeles, United States, North America'.

Also, again, filename expansion could corrupt the expanded words, but this can be prevented by temporarily disabling globbing for the assignment with set -f and then set +f.

Also, again, all empty fields will be lost, which may or may not be a problem depending on the application.

Wrong answer #4

string='first line
second line
third line'

oldIFS="$IFS"
IFS='
'
IFS=${IFS:0:1} # this is useful to format your code with tabs
lines=( $string )
IFS="$oldIFS"

This is similar to #2 and #3 in that it uses word splitting to get the job done, only now the code explicitly sets $IFS to contain only the single-character field delimiter present in the input string. It should be repeated that this cannot work for multicharacter field delimiters such as the OP's comma-space delimiter. But for a single-character delimiter like the LF used in this example, it actually comes close to being perfect. The fields cannot be unintentionally split in the middle as we saw with previous wrong answers, and there is only one level of splitting, as required.

One problem is that filename expansion will corrupt affected words as described earlier, although once again this can be solved by wrapping the critical statement in set -f and set +f.

Another potential problem is that, since LF qualifies as an "IFS whitespace character" as defined earlier, all empty fields will be lost, just as in #2 and #3. This would of course not be a problem if the delimiter happens to be a non-"IFS whitespace character", and depending on the application it may not matter anyway, but it does vitiate the generality of the solution.

So, to sum up, assuming you have a one-character delimiter, and it is either a non-"IFS whitespace character" or you don't care about empty fields, and you wrap the critical statement in set -f and set +f, then this solution works, but otherwise not.

(Also, for information's sake, assigning a LF to a variable in bash can be done more easily with the $'...' syntax, e.g. IFS=$'\n';.)

Wrong answer #5

countries='Paris, France, Europe'
OIFS="$IFS"
IFS=', ' array=($countries)
IFS="$OIFS"

Similar idea:

IFS=', ' eval 'array=($string)'

This solution is effectively a cross between #1 (in that it sets $IFS to comma-space) and #2-4 (in that it uses word splitting to split the string into fields). Because of this, it suffers from most of the problems that afflict all of the above wrong answers, sort of like the worst of all worlds.

Also, regarding the second variant, it may seem like the eval call is completely unnecessary, since its argument is a single-quoted string literal, and therefore is statically known. But there's actually a very non-obvious benefit to using eval in this way. Normally, when you run a simple command which consists of a variable assignment only, meaning without an actual command word following it, the assignment takes effect in the shell environment:

IFS=', '; ## changes $IFS in the shell environment

This is true even if the simple command involves multiple variable assignments; again, as long as there's no command word, all variable assignments affect the shell environment:

IFS=', ' array=($countries); ## changes both $IFS and $array in the shell environment

But, if the variable assignment is attached to a command name (I like to call this a "prefix assignment") then it does not affect the shell environment, and instead only affects the environment of the executed command, regardless whether it is a builtin or external:

IFS=', ' :; ## : is a builtin command, the $IFS assignment does not outlive it
IFS=', ' env; ## env is an external command, the $IFS assignment does not outlive it

Relevant quote from the bash manual:

If no command name results, the variable assignments affect the current shell environment. Otherwise, the variables are added to the environment of the executed command and do not affect the current shell environment.

It is possible to exploit this feature of variable assignment to change $IFS only temporarily, which allows us to avoid the whole save-and-restore gambit like that which is being done with the $OIFS variable in the first variant. But the challenge we face here is that the command we need to run is itself a mere variable assignment, and hence it would not involve a command word to make the $IFS assignment temporary. You might think to yourself, well why not just add a no-op command word to the statement like the : builtin to make the $IFS assignment temporary? This does not work because it would then make the $array assignment temporary as well:

IFS=', ' array=($countries) :; ## fails; new $array value never escapes the : command

So, we're effectively at an impasse, a bit of a catch-22. But, when eval runs its code, it runs it in the shell environment, as if it was normal, static source code, and therefore we can run the $array assignment inside the eval argument to have it take effect in the shell environment, while the $IFS prefix assignment that is prefixed to the eval command will not outlive the eval command. This is exactly the trick that is being used in the second variant of this solution:

IFS=', ' eval 'array=($string)'; ## $IFS does not outlive the eval command, but $array does

So, as you can see, it's actually quite a clever trick, and accomplishes exactly what is required (at least with respect to assignment effectation) in a rather non-obvious way. I'm actually not against this trick in general, despite the involvement of eval; just be careful to single-quote the argument string to guard against security threats.

But again, because of the "worst of all worlds" agglomeration of problems, this is still a wrong answer to the OP's requirement.

Wrong answer #6

IFS=', '; array=(Paris, France, Europe)

IFS=' ';declare -a array=(Paris France Europe)

Um... what? The OP has a string variable that needs to be parsed into an array. This "answer" starts with the verbatim contents of the input string pasted into an array literal. I guess that's one way to do it.

It looks like the answerer may have assumed that the $IFS variable affects all bash parsing in all contexts, which is not true. From the bash manual:

IFS    The Internal Field Separator that is used for word splitting after expansion and to split lines into words with the read builtin command. The default value is <space><tab><newline>.

So the $IFS special variable is actually only used in two contexts: (1) word splitting that is performed after expansion (meaning not when parsing bash source code) and (2) for splitting input lines into words by the read builtin.

Let me try to make this clearer. I think it might be good to draw a distinction between parsing and execution. Bash must first parse the source code, which obviously is a parsing event, and then later it executes the code, which is when expansion comes into the picture. Expansion is really an execution event. Furthermore, I take issue with the description of the $IFS variable that I just quoted above; rather than saying that word splitting is performed after expansion, I would say that word splitting is performed during expansion, or, perhaps even more precisely, word splitting is part of the expansion process. The phrase "word splitting" refers only to this step of expansion; it should never be used to refer to the parsing of bash source code, although unfortunately the docs do seem to throw around the words "split" and "words" a lot. Here's a relevant excerpt from the linux.die.net version of the bash manual:

Expansion is performed on the command line after it has been split into words. There are seven kinds of expansion performed: brace expansion, tilde expansion, parameter and variable expansion, command substitution, arithmetic expansion, word splitting, and pathname expansion.

The order of expansions is: brace expansion; tilde expansion, parameter and variable expansion, arithmetic expansion, and command substitution (done in a left-to-right fashion); word splitting; and pathname expansion.

You could argue the GNU version of the manual does slightly better, since it opts for the word "tokens" instead of "words" in the first sentence of the Expansion section:

Expansion is performed on the command line after it has been split into tokens.

The important point is, $IFS does not change the way bash parses source code. Parsing of bash source code is actually a very complex process that involves recognition of the various elements of shell grammar, such as command sequences, command lists, pipelines, parameter expansions, arithmetic substitutions, and command substitutions. For the most part, the bash parsing process cannot be altered by user-level actions like variable assignments (actually, there are some minor exceptions to this rule; for example, see the various compatxx shell settings, which can change certain aspects of parsing behavior on-the-fly). The upstream "words"/"tokens" that result from this complex parsing process are then expanded according to the general process of "expansion" as broken down in the above documentation excerpts, where word splitting of the expanded (expanding?) text into downstream words is simply one step of that process. Word splitting only touches text that has been spit out of a preceding expansion step; it does not affect literal text that was parsed right off the source bytestream.

Wrong answer #7

string='first line
        second line
        third line'

while read -r line; do lines+=("$line"); done <<<"$string"

This is one of the best solutions. Notice that we're back to using read. Didn't I say earlier that read is inappropriate because it performs two levels of splitting, when we only need one? The trick here is that you can call read in such a way that it effectively only does one level of splitting, specifically by splitting off only one field per invocation, which necessitates the cost of having to call it repeatedly in a loop. It's a bit of a sleight of hand, but it works.

But there are problems. First: When you provide at least one NAME argument to read, it automatically ignores leading and trailing whitespace in each field that is split off from the input string. This occurs whether $IFS is set to its default value or not, as described earlier in this post. Now, the OP may not care about this for his specific use-case, and in fact, it may be a desirable feature of the parsing behavior. But not everyone who wants to parse a string into fields will want this. There is a solution, however: A somewhat non-obvious usage of read is to pass zero NAME arguments. In this case, read will store the entire input line that it gets from the input stream in a variable named $REPLY, and, as a bonus, it does not strip leading and trailing whitespace from the value. This is a very robust usage of read which I've exploited frequently in my shell programming career. Here's a demonstration of the difference in behavior:

string=$'  a  b  \n  c  d  \n  e  f  '; ## input string

a=(); while read -r line; do a+=("$line"); done <<<"$string"; declare -p a;
## declare -a a=([0]="a  b" [1]="c  d" [2]="e  f") ## read trimmed surrounding whitespace

a=(); while read -r; do a+=("$REPLY"); done <<<"$string"; declare -p a;
## declare -a a=([0]="  a  b  " [1]="  c  d  " [2]="  e  f  ") ## no trimming

The second issue with this solution is that it does not actually address the case of a custom field separator, such as the OP's comma-space. As before, multicharacter separators are not supported, which is an unfortunate limitation of this solution. We could try to at least split on comma by specifying the separator to the -d option, but look what happens:

string='Paris, France, Europe';
a=(); while read -rd,; do a+=("$REPLY"); done <<<"$string"; declare -p a;
## declare -a a=([0]="Paris" [1]=" France")

Predictably, the unaccounted surrounding whitespace got pulled into the field values, and hence this would have to be corrected subsequently through trimming operations (this could also be done directly in the while-loop). But there's another obvious error: Europe is missing! What happened to it? The answer is that read returns a failing return code if it hits end-of-file (in this case we can call it end-of-string) without encountering a final field terminator on the final field. This causes the while-loop to break prematurely and we lose the final field.

Technically this same error afflicted the previous examples as well; the difference there is that the field separator was taken to be LF, which is the default when you don't specify the -d option, and the <<< ("here-string") mechanism automatically appends a LF to the string just before it feeds it as input to the command. Hence, in those cases, we sort of accidentally solved the problem of a dropped final field by unwittingly appending an additional dummy terminator to the input. Let's call this solution the "dummy-terminator" solution. We can apply the dummy-terminator solution manually for any custom delimiter by concatenating it against the input string ourselves when instantiating it in the here-string:

a=(); while read -rd,; do a+=("$REPLY"); done <<<"$string,"; declare -p a;
declare -a a=([0]="Paris" [1]=" France" [2]=" Europe")

There, problem solved. Another solution is to only break the while-loop if both (1) read returned failure and (2) $REPLY is empty, meaning read was not able to read any characters prior to hitting end-of-file. Demo:

a=(); while read -rd,|| [[ -n "$REPLY" ]]; do a+=("$REPLY"); done <<<"$string"; declare -p a;
## declare -a a=([0]="Paris" [1]=" France" [2]=$' Europe\n')

This approach also reveals the secretive LF that automatically gets appended to the here-string by the <<< redirection operator. It could of course be stripped off separately through an explicit trimming operation as described a moment ago, but obviously the manual dummy-terminator approach solves it directly, so we could just go with that. The manual dummy-terminator solution is actually quite convenient in that it solves both of these two problems (the dropped-final-field problem and the appended-LF problem) in one go.

So, overall, this is quite a powerful solution. It's only remaining weakness is a lack of support for multicharacter delimiters, which I will address later.

Wrong answer #8

string='first line
        second line
        third line'

readarray -t lines <<<"$string"

(This is actually from the same post as #7; the answerer provided two solutions in the same post.)

The readarray builtin, which is a synonym for mapfile, is ideal. It's a builtin command which parses a bytestream into an array variable in one shot; no messing with loops, conditionals, substitutions, or anything else. And it doesn't surreptitiously strip any whitespace from the input string. And (if -O is not given) it conveniently clears the target array before assigning to it. But it's still not perfect, hence my criticism of it as a "wrong answer".

First, just to get this out of the way, note that, just like the behavior of read when doing field-parsing, readarray drops the trailing field if it is empty. Again, this is probably not a concern for the OP, but it could be for some use-cases. I'll come back to this in a moment.

Second, as before, it does not support multicharacter delimiters. I'll give a fix for this in a moment as well.

Third, the solution as written does not parse the OP's input string, and in fact, it cannot be used as-is to parse it. I'll expand on this momentarily as well.

For the above reasons, I still consider this to be a "wrong answer" to the OP's question. Below I'll give what I consider to be the right answer.

Right answer

Here's a naïve attempt to make #8 work by just specifying the -d option:

string='Paris, France, Europe';
readarray -td, a <<<"$string"; declare -p a;
## declare -a a=([0]="Paris" [1]=" France" [2]=$' Europe\n')

We see the result is identical to the result we got from the double-conditional approach of the looping read solution discussed in #7. We can almost solve this with the manual dummy-terminator trick:

readarray -td, a <<<"$string,"; declare -p a;
## declare -a a=([0]="Paris" [1]=" France" [2]=" Europe" [3]=$'\n')

The problem here is that readarray preserved the trailing field, since the <<< redirection operator appended the LF to the input string, and therefore the trailing field was not empty (otherwise it would've been dropped). We can take care of this by explicitly unsetting the final array element after-the-fact:

readarray -td, a <<<"$string,"; unset 'a[-1]'; declare -p a;
## declare -a a=([0]="Paris" [1]=" France" [2]=" Europe")

The only two problems that remain, which are actually related, are (1) the extraneous whitespace that needs to be trimmed, and (2) the lack of support for multicharacter delimiters.

The whitespace could of course be trimmed afterward (for example, see How to trim whitespace from a Bash variable?). But if we can hack a multicharacter delimiter, then that would solve both problems in one shot.

Unfortunately, there's no direct way to get a multicharacter delimiter to work. The best solution I've thought of is to preprocess the input string to replace the multicharacter delimiter with a single-character delimiter that will be guaranteed not to collide with the contents of the input string. The only character that has this guarantee is the NUL byte. This is because, in bash (though not in zsh, incidentally), variables cannot contain the NUL byte. This preprocessing step can be done inline in a process substitution. Here's how to do it using awk:

readarray -td '' a < <(awk '{ gsub(/, /,"\0"); print; }' <<<"$string, "); unset 'a[-1]';
declare -p a;
## declare -a a=([0]="Paris" [1]="France" [2]="Europe")

There, finally! This solution will not erroneously split fields in the middle, will not cut out prematurely, will not drop empty fields, will not corrupt itself on filename expansions, will not automatically strip leading and trailing whitespace, will not leave a stowaway LF on the end, does not require loops, and does not settle for a single-character delimiter.

Trimming solution

Lastly,

Regarding Diadistis response. This worked for me, except I had to use Floor to remove the fractional part of the division before the multiplication. So,

d = new DateTime((d.Ticks / TimeSpan.TicksPerSecond) * TimeSpan.TicksPerSecond);

becomes

d = new DateTime(Math.Floor(d.Ticks / TimeSpan.TicksPerSecond) * TimeSpan.TicksPerSecond);

I would have expected the division of two Long values to result in a Long, thus removing the decimal part, but it resolves it as a Double leaving the exact same value after the multiplication.

Eppsy

Visual Studio code is great for this - open a folder, right click both files and compare.

#include<iostream>
#include<conio.h>
#include<stdlib.h>
using namespace std;
void displayBinary(int n)
{
       char bistr[1000];
       itoa(n,bistr,2);       //2 means binary u can convert n upto base 36
       printf("%s",bistr);

}

int main()
{
    int n;
    cin>>n;
    displayBinary(n);
    getch();
    return 0;
}

0x7ffffff's answer is ok and definitely exhaustive.

As a plus, I suggest you to make an UIView extension, in this way:

public extension UIView {

  /**
  Fade in a view with a duration

  - parameter duration: custom animation duration
  */
  func fadeIn(duration duration: NSTimeInterval = 1.0) {
    UIView.animateWithDuration(duration, animations: {
        self.alpha = 1.0
    })
  }

  /**
  Fade out a view with a duration

  - parameter duration: custom animation duration
  */
  func fadeOut(duration duration: NSTimeInterval = 1.0) {
    UIView.animateWithDuration(duration, animations: {
        self.alpha = 0.0
    })
  }

}

Swift-3

/// Fade in a view with a duration
/// 
/// Parameter duration: custom animation duration
func fadeIn(withDuration duration: TimeInterval = 1.0) {
    UIView.animate(withDuration: duration, animations: {
        self.alpha = 1.0
    })
}

/// Fade out a view with a duration
///
/// - Parameter duration: custom animation duration
func fadeOut(withDuration duration: TimeInterval = 1.0) {
    UIView.animate(withDuration: duration, animations: {
        self.alpha = 0.0
    })
}

In this way you can do this wherever in your code:

let newImage = UIImage(named: "")
newImage.alpha = 0 // or newImage.fadeOut(duration: 0.0)
self.view.addSubview(newImage)
... 
newImage.fadeIn()

Code reuse is important!

The command mention in the description returns "SYSTEM" which indicated it takes the timezone of the server. Which is not useful for our query.

Following query will help to understand the timezone

SELECT TIMEDIFF(NOW(), UTC_TIMESTAMP) as GMT_TIME_DIFF;

Above query will give you the time interval with respect to Coordinated Universal Time(UTC). So you can easily analyze the timezone. if the database time zone is IST the output will be 5:30

UTC_TIMESTAMP

In MySQL, the UTC_TIMESTAMP returns the current UTC date and time as a value in 'YYYY-MM-DD HH:MM:SS' or YYYYMMDDHHMMSS.uuuuuu format depending on the usage of the function i.e. in a string or numeric context.

NOW()

NOW() function. MySQL NOW() returns the value of current date and time in 'YYYY-MM-DD HH:MM:SS' format or YYYYMMDDHHMMSS.uuuuuu format depending on the context (numeric or string) of the function. CURRENT_TIMESTAMP, CURRENT_TIMESTAMP(), LOCALTIME, LOCALTIME(), LOCALTIMESTAMP, LOCALTIMESTAMP() are synonyms of NOW().

Try to modify the eclipse.ini so that both Xms and Xmx are of the same value:

-Xms6000m
-Xmx6000m

This should force the Eclipse's VM to allocate 6GB of heap right from the beginning.

But be careful about either using the eclipse.ini or the command-line ./eclipse/eclipse -vmargs .... It should work in both cases but pick one and try to stick with it.

For someone using Android Studio 4.0 or above on MacOS 10.15.1 or above. Using command line blow:

# Deletes the Android Studio application
# Note that this may be different depending on what you named the application as, or whether you downloaded the preview version
rm -Rf /Applications/Android\ Studio.app
# Delete All Android Studio related preferences
# The asterisk here should target all folders/files beginning with the string before it
rm -Rf ~/Library/Preferences/Google/AndroidStudio*
# Deletes the Android Studio's plist file
rm -Rf ~/Library/Preferences/com.google.android.*
# Deletes the Android Emulator's plist file
rm -Rf ~/Library/Preferences/com.android.*
# Deletes mainly plugins (or at least according to what mine (Edric) contains)
rm -Rf ~/Library/Application\ Support/Google/AndroidStudio*
# Deletes all logs that Android Studio outputs
rm -Rf ~/Library/Logs/Google/AndroidStudio*
# Deletes Android Studio's caches
rm -Rf ~/Library/Caches/Google/AndroidStudio*
# Deletes older versions of Android Studio
rm -Rf ~/.AndroidStudio*

Difference

Library/Preferences/Google/AndroidStudio*

Library/Logs/Google/AndroidStudio*

Library/Caches/Google/AndroidStudio*

@Zelazny7's answer works, but if you want to keep ties you could do:

df[which(df$Amount == min(df$Amount)), ]

For example with the following data frame:

df <- data.frame(Name = c("A", "B", "C", "D", "E"), 
                 Amount = c(150, 120, 175, 160, 120))

df[which.min(df$Amount), ]
#   Name Amount
# 2    B    120

df[which(df$Amount == min(df$Amount)), ]
#   Name Amount
# 2    B    120
# 5    E    120

Edit: If there are NAs in the Amount column you can do:

df[which(df$Amount == min(df$Amount, na.rm = TRUE)), ]

To avoid doing indexing from inside lambda, like:

rval = dict(map(lambda kv : (kv[0], ' '.join(kv[1])), rval.iteritems()))

You can also do:

rval = dict(map(lambda(k,v) : (k, ' '.join(v)), rval.iteritems()))

I did this and it works for me. "content" is placesContent object. not the html content!

var placesContent = $('#placescontent');
$('#places').popover({
        trigger: "click",
        placement: "bottom",
        container: 'body',
        html : true,
        content : placesContent,
    });

$('#places').on('shown.bs.popover', function(){
  $('#addPlaceBtn').on('click', addPlace);
}

<div id="placescontent"><div id="addPlaceBtn">Add</div></div>

I have done it this way (example):

String query="SELECT count(t1.id) from t1, t2 where t1.id=t2.id and t2.email='"[email protected]"'";
int count=0;
try {
    ResultSet rs = DatabaseService.statementDataBase().executeQuery(query);
    while(rs.next())
        count=rs.getInt(1);
} catch (SQLException e) {
    e.printStackTrace();
} finally {
    //...
}

Those using a buffer or tree navigation plugin, like Buffergator or NERDTree, will need to toggle these splits before destroying the current buffer - else you'll send your splits into wonkyville

I use:

"" Buffer Navigation                                                                                                                                                                                        
" Toggle left sidebar: NERDTree and BufferGator                                                                                                                                                             
fu! UiToggle()                                                                                                                                                                                              
  let b = bufnr("%")                                                                                                                                                                                        
  execute "NERDTreeToggle | BuffergatorToggle"                                                                                                                                                              
  execute ( bufwinnr(b) . "wincmd w" )                                                                                                                                                                      
  execute ":set number!"                                                                                                                                                                                    
endf                                                                                                                                                                                                        
map  <silent> <Leader>w  <esc>:call UiToggle()<cr>   

Where "NERDTreeToggle" in that list is the same as typing :NERDTreeToggle. You can modify this function to integrate with your own configuration.

I recently posted an answer to this question on UK postcodes for the R language. I discovered that the UK Government's regex pattern is incorrect and fails to properly validate some postcodes. Unfortunately, many of the answers here are based on this incorrect pattern.

I'll outline some of these issues below and provide a revised regular expression that actually works.

Note

My answer (and regular expressions in general):

• Only validates postcode formats.
• Does not ensure that a postcode legitimately exists.
  • For this, use an appropriate API! See Ben's answer for more info.

_{If you don't care about the bad regex and just want to skip to the answer, scroll down to the Answer section.}

The Bad Regex

The regular expressions in this section should not be used.

This is the failing regex that the UK government has provided developers (not sure how long this link will be up, but you can see it in their Bulk Data Transfer documentation):

^([Gg][Ii][Rr] 0[Aa]{2})|((([A-Za-z][0-9]{1,2})|(([A-Za-z][A-Ha-hJ-Yj-y][0-9]{1,2})|(([AZa-z][0-9][A-Za-z])|([A-Za-z][A-Ha-hJ-Yj-y][0-9]?[A-Za-z]))))[0-9][A-Za-z]{2})$

Problems

Problem 1 - Copy/Paste

See regex in use here.

As many developers likely do, they copy/paste code (especially regular expressions) and paste them expecting them to work. While this is great in theory, it fails in this particular case because copy/pasting from this document actually changes one of the characters (a space) into a newline character as shown below:

^([Gg][Ii][Rr] 0[Aa]{2})|((([A-Za-z][0-9]{1,2})|(([A-Za-z][A-Ha-hJ-Yj-y][0-9]{1,2})|(([AZa-z][0-9][A-Za-z])|([A-Za-z][A-Ha-hJ-Yj-y][0-9]?[A-Za-z]))))
[0-9][A-Za-z]{2})$

The first thing most developers will do is just erase the newline without thinking twice. Now the regex won't match postcodes with spaces in them (other than the GIR 0AA postcode).

To fix this issue, the newline character should be replaced with the space character:

^([Gg][Ii][Rr] 0[Aa]{2})|((([A-Za-z][0-9]{1,2})|(([A-Za-z][A-Ha-hJ-Yj-y][0-9]{1,2})|(([AZa-z][0-9][A-Za-z])|([A-Za-z][A-Ha-hJ-Yj-y][0-9]?[A-Za-z])))) [0-9][A-Za-z]{2})$
                                                                                                                                                     ^

Problem 2 - Boundaries

See regex in use here.

^([Gg][Ii][Rr] 0[Aa]{2})|((([A-Za-z][0-9]{1,2})|(([A-Za-z][A-Ha-hJ-Yj-y][0-9]{1,2})|(([AZa-z][0-9][A-Za-z])|([A-Za-z][A-Ha-hJ-Yj-y][0-9]?[A-Za-z])))) [0-9][A-Za-z]{2})$
^^                     ^ ^                                                                                                                                            ^^

The postcode regex improperly anchors the regex. Anyone using this regex to validate postcodes might be surprised if a value like fooA11 1AA gets through. That's because they've anchored the start of the first option and the end of the second option (independently of one another), as pointed out in the regex above.

What this means is that ^ (asserts position at start of the line) only works on the first option ([Gg][Ii][Rr] 0[Aa]{2}), so the second option will validate any strings that end in a postcode (regardless of what comes before).

Similarly, the first option isn't anchored to the end of the line $, so GIR 0AAfoo is also accepted.

^([Gg][Ii][Rr] 0[Aa]{2})|((([A-Za-z][0-9]{1,2})|(([A-Za-z][A-Ha-hJ-Yj-y][0-9]{1,2})|(([AZa-z][0-9][A-Za-z])|([A-Za-z][A-Ha-hJ-Yj-y][0-9]?[A-Za-z]))))[0-9][A-Za-z]{2})$

To fix this issue, both options should be wrapped in another group (or non-capturing group) and the anchors placed around that:

^(([Gg][Ii][Rr] 0[Aa]{2})|((([A-Za-z][0-9]{1,2})|(([A-Za-z][A-Ha-hJ-Yj-y][0-9]{1,2})|(([AZa-z][0-9][A-Za-z])|([A-Za-z][A-Ha-hJ-Yj-y][0-9]?[A-Za-z])))) [0-9][A-Za-z]{2}))$
^^                                                                                                                                                                      ^^

Problem 3 - Improper Character Set

See regex in use here.

^([Gg][Ii][Rr] 0[Aa]{2})|((([A-Za-z][0-9]{1,2})|(([A-Za-z][A-Ha-hJ-Yj-y][0-9]{1,2})|(([AZa-z][0-9][A-Za-z])|([A-Za-z][A-Ha-hJ-Yj-y][0-9]?[A-Za-z])))) [0-9][A-Za-z]{2})$
                                                                                       ^^

The regex is missing a - here to indicate a range of characters. As it stands, if a postcode is in the format ANA NAA (where A represents a letter and N represents a number), and it begins with anything other than A or Z, it will fail.

That means it will match A1A 1AA and Z1A 1AA, but not B1A 1AA.

To fix this issue, the character - should be placed between the A and Z in the respective character set:

^([Gg][Ii][Rr] 0[Aa]{2})|((([A-Za-z][0-9]{1,2})|(([A-Za-z][A-Ha-hJ-Yj-y][0-9]{1,2})|(([A-Za-z][0-9][A-Za-z])|([A-Za-z][A-Ha-hJ-Yj-y][0-9]?[A-Za-z])))) [0-9][A-Za-z]{2})$
                                                                                        ^

Problem 4 - Wrong Optional Character Set

See regex in use here.

^([Gg][Ii][Rr] 0[Aa]{2})|((([A-Za-z][0-9]{1,2})|(([A-Za-z][A-Ha-hJ-Yj-y][0-9]{1,2})|(([AZa-z][0-9][A-Za-z])|([A-Za-z][A-Ha-hJ-Yj-y][0-9]?[A-Za-z])))) [0-9][A-Za-z]{2})$
                                                                                                                                        ^

I swear they didn't even test this thing before publicizing it on the web. They made the wrong character set optional. They made [0-9] option in the fourth sub-option of option 2 (group 9). This allows the regex to match incorrectly formatted postcodes like AAA 1AA.

To fix this issue, make the next character class optional instead (and subsequently make the set [0-9] match exactly once):

^([Gg][Ii][Rr] 0[Aa]{2})|((([A-Za-z][0-9]{1,2})|(([A-Za-z][A-Ha-hJ-Yj-y][0-9]{1,2})|(([AZa-z][0-9][A-Za-z])|([A-Za-z][A-Ha-hJ-Yj-y][0-9][A-Za-z]?)))) [0-9][A-Za-z]{2})$
                                                                                                                                                ^

Problem 5 - Performance

Performance on this regex is extremely poor. First off, they placed the least likely pattern option to match GIR 0AA at the beginning. How many users will likely have this postcode versus any other postcode; probably never? This means every time the regex is used, it must exhaust this option first before proceeding to the next option. To see how performance is impacted check the number of steps the original regex took (35) against the same regex after having flipped the options (22).

The second issue with performance is due to the way the entire regex is structured. There's no point backtracking over each option if one fails. The way the current regex is structured can greatly be simplified. I provide a fix for this in the Answer section.

Problem 6 - Spaces

See regex in use here

This may not be considered a problem, per se, but it does raise concern for most developers. The spaces in the regex are not optional, which means the users inputting their postcodes must place a space in the postcode. This is an easy fix by simply adding ? after the spaces to render them optional. See the Answer section for a fix.

Answer

1. Fixing the UK Government's Regex

Fixing all the issues outlined in the Problems section and simplifying the pattern yields the following, shorter, more concise pattern. We can also remove most of the groups since we're validating the postcode as a whole (not individual parts):

See regex in use here

^([A-Za-z][A-Ha-hJ-Yj-y]?[0-9][A-Za-z0-9]? ?[0-9][A-Za-z]{2}|[Gg][Ii][Rr] ?0[Aa]{2})$

This can further be shortened by removing all of the ranges from one of the cases (upper or lower case) and using a case-insensitive flag. Note: Some languages don't have one, so use the longer one above. Each language implements the case-insensitivity flag differently.

See regex in use here.

^([A-Z][A-HJ-Y]?[0-9][A-Z0-9]? ?[0-9][A-Z]{2}|GIR ?0A{2})$

Shorter again replacing [0-9] with \d (if your regex engine supports it):

See regex in use here.

^([A-Z][A-HJ-Y]?\d[A-Z\d]? ?\d[A-Z]{2}|GIR ?0A{2})$

2. Simplified Patterns

Without ensuring specific alphabetic characters, the following can be used (keep in mind the simplifications from 1. Fixing the UK Government's Regex have also been applied here):

See regex in use here.

^([A-Z]{1,2}\d[A-Z\d]? ?\d[A-Z]{2}|GIR ?0A{2})$

And even further if you don't care about the special case GIR 0AA:

^[A-Z]{1,2}\d[A-Z\d]? ?\d[A-Z]{2}$

3. Complicated Patterns

I would not suggest over-verification of a postcode as new Areas, Districts and Sub-districts may appear at any point in time. What I will suggest potentially doing, is added support for edge-cases. Some special cases exist and are outlined in this Wikipedia article.

Here are complex regexes that include the subsections of 3. (3.1, 3.2, 3.3).

In relation to the patterns in 1. Fixing the UK Government's Regex:

See regex in use here

^(([A-Z][A-HJ-Y]?\d[A-Z\d]?|ASCN|STHL|TDCU|BBND|[BFS]IQQ|PCRN|TKCA) ?\d[A-Z]{2}|BFPO ?\d{1,4}|(KY\d|MSR|VG|AI)[ -]?\d{4}|[A-Z]{2} ?\d{2}|GE ?CX|GIR ?0A{2}|SAN ?TA1)$

And in relation to 2. Simplified Patterns:

See regex in use here

^(([A-Z]{1,2}\d[A-Z\d]?|ASCN|STHL|TDCU|BBND|[BFS]IQQ|PCRN|TKCA) ?\d[A-Z]{2}|BFPO ?\d{1,4}|(KY\d|MSR|VG|AI)[ -]?\d{4}|[A-Z]{2} ?\d{2}|GE ?CX|GIR ?0A{2}|SAN ?TA1)$

3.1 British Overseas Territories

The Wikipedia article currently states (some formats slightly simplified):

• AI-1111: Anguila
• ASCN 1ZZ: Ascension Island
• STHL 1ZZ: Saint Helena
• TDCU 1ZZ: Tristan da Cunha
• BBND 1ZZ: British Indian Ocean Territory
• BIQQ 1ZZ: British Antarctic Territory
• FIQQ 1ZZ: Falkland Islands
• GX11 1ZZ: Gibraltar
• PCRN 1ZZ: Pitcairn Islands
• SIQQ 1ZZ: South Georgia and the South Sandwich Islands
• TKCA 1ZZ: Turks and Caicos Islands
• BFPO 11: Akrotiri and Dhekelia
• ZZ 11 & GE CX: Bermuda (according to this document)
• KY1-1111: Cayman Islands (according to this document)
• VG1111: British Virgin Islands (according to this document)
• MSR 1111: Montserrat (according to this document)

An all-encompassing regex to match only the British Overseas Territories might look like this:

See regex in use here.

^((ASCN|STHL|TDCU|BBND|[BFS]IQQ|GX\d{2}|PCRN|TKCA) ?\d[A-Z]{2}|(KY\d|MSR|VG|AI)[ -]?\d{4}|(BFPO|[A-Z]{2}) ?\d{2}|GE ?CX)$

3.2 British Forces Post Office

Although they've been recently changed it to better align with the British postcode system to BF# (where # represents a number), they're considered optional alternative postcodes. These postcodes follow(ed) the format of BFPO, followed by 1-4 digits:

See regex in use here

^BFPO ?\d{1,4}$

3.3 Santa?

There's another special case with Santa (as mentioned in other answers): SAN TA1 is a valid postcode. A regex for this is very simply:

^SAN ?TA1$

A 100% pure Bash function that supports multi-character delimiters is:

function join_by { local d=$1; shift; local f=$1; shift; printf %s "$f" "${@/#/$d}"; }

For example,

join_by , a b c #a,b,c
join_by ' , ' a b c #a , b , c
join_by ')|(' a b c #a)|(b)|(c
join_by ' %s ' a b c #a %s b %s c
join_by $'\n' a b c #a<newline>b<newline>c
join_by - a b c #a-b-c
join_by '\' a b c #a\b\c
join_by '-n' '-e' '-E' '-n' #-e-n-E-n-n
join_by , #
join_by , a #a

The code above is based on the ideas by @gniourf_gniourf, @AdamKatz, and @MattCowell.

Alternatively, a simpler function that supports only a single character delimiter, would be:

function join_by { local IFS="$1"; shift; echo "$*"; }

For example,

join_by , a "b c" d #a,b c,d
join_by / var local tmp #var/local/tmp
join_by , "${FOO[@]}" #a,b,c

This solution is based on Pascal Pilz's original suggestion.

A detailed explanation of the solutions proposed here can be found in "How to join() array elements in a bash script", an article by meleu at dev.to.

```javascript
{ "some": "json" }
```

I tried using json but didn't like the way it looked. javascript looks a bit more pleasing to my eye.

You could wrap window.setTimeout like this, which I think is similar to what you were suggesting in the question:

var Timer = function(callback, delay) {
    var timerId, start, remaining = delay;

    this.pause = function() {
        window.clearTimeout(timerId);
        remaining -= Date.now() - start;
    };

    this.resume = function() {
        start = Date.now();
        window.clearTimeout(timerId);
        timerId = window.setTimeout(callback, remaining);
    };

    this.resume();
};

var timer = new Timer(function() {
    alert("Done!");
}, 1000);

timer.pause();
// Do some stuff...
timer.resume();

Because some database can throw an exception at dbContextTransaction.Commit() so better this:

using (var context = new BloggingContext()) 
{ 
  using (var dbContextTransaction = context.Database.BeginTransaction()) 
  { 
    try 
    { 
      context.Database.ExecuteSqlCommand( 
          @"UPDATE Blogs SET Rating = 5" + 
              " WHERE Name LIKE '%Entity Framework%'" 
          ); 

      var query = context.Posts.Where(p => p.Blog.Rating >= 5); 
      foreach (var post in query) 
      { 
          post.Title += "[Cool Blog]"; 
      } 

      context.SaveChanges(false); 

      dbContextTransaction.Commit(); 

      context.AcceptAllChanges();
    } 
    catch (Exception) 
    { 
      dbContextTransaction.Rollback(); 
    } 
  } 
} 

Use this easy scaling technique

img {
    max-width: 100%;
    height: auto;
}
@media {
  img { 
    width: auto; /* for ie 8 */
  }
}

With the introduction of (i|android|windows)phones, things have changed, and to get a correct and complete solution that works on any device is really time-consuming.

You can have a peek at https://realfavicongenerator.net/favicon_compatibility or http://caniuse.com/#search=favicon to get an idea on the best way to get something that works on any device.

You should have a look at http://realfavicongenerator.net/ to automate a large part of this work, and probably at https://github.com/audreyr/favicon-cheat-sheet to understand how it works (even if this latter resource hasn't been updated in a loooong time).

One complete solution requires to add to you header the following (with the corresponding pictures and files, of course) :

<link rel="shortcut icon" href="favicon.ico">
<link rel="apple-touch-icon" sizes="57x57" href="apple-touch-icon-57x57.png">
<link rel="apple-touch-icon" sizes="114x114" href="apple-touch-icon-114x114.png">
<link rel="apple-touch-icon" sizes="72x72" href="apple-touch-icon-72x72.png">
<link rel="apple-touch-icon" sizes="144x144" href="apple-touch-icon-144x144.png">
<link rel="apple-touch-icon" sizes="60x60" href="apple-touch-icon-60x60.png">
<link rel="apple-touch-icon" sizes="120x120" href="apple-touch-icon-120x120.png">
<link rel="apple-touch-icon" sizes="76x76" href="apple-touch-icon-76x76.png">
<link rel="apple-touch-icon" sizes="152x152" href="apple-touch-icon-152x152.png">
<link rel="apple-touch-icon" sizes="180x180" href="apple-touch-icon-180x180.png">
<link rel="icon" type="image/png" href="favicon-192x192.png" sizes="192x192">
<link rel="icon" type="image/png" href="favicon-160x160.png" sizes="160x160">
<link rel="icon" type="image/png" href="favicon-96x96.png" sizes="96x96">
<link rel="icon" type="image/png" href="favicon-16x16.png" sizes="16x16">
<link rel="icon" type="image/png" href="favicon-32x32.png" sizes="32x32">
<meta name="msapplication-TileColor" content="#ffffff">
<meta name="msapplication-TileImage" content="mstile-144x144.png">
<meta name="msapplication-config" content="browserconfig.xml">

In June 2016, RealFaviconGenerator claimed that the following 5 lines of code were supporting as many devices as the previous 18 lines:

<link rel="apple-touch-icon" sizes="180x180" href="/apple-touch-icon.png">
<link rel="icon" type="image/png" href="/favicon-32x32.png" sizes="32x32">
<link rel="icon" type="image/png" href="/favicon-16x16.png" sizes="16x16">
<link rel="manifest" href="/manifest.json">
<link rel="mask-icon" href="/safari-pinned-tab.svg" color="#5bbad5">
<meta name="theme-color" content="#ffffff">

All of these solutions are ugly because multiprocessing and pickling is broken and limited unless you jump outside the standard library.

If you use a fork of multiprocessing called pathos.multiprocesssing, you can directly use classes and class methods in multiprocessing's map functions. This is because dill is used instead of pickle or cPickle, and dill can serialize almost anything in python.

pathos.multiprocessing also provides an asynchronous map function… and it can map functions with multiple arguments (e.g. map(math.pow, [1,2,3], [4,5,6]))

See: What can multiprocessing and dill do together?

and: http://matthewrocklin.com/blog/work/2013/12/05/Parallelism-and-Serialization/

>>> import pathos.pools as pp
>>> p = pp.ProcessPool(4)
>>> 
>>> def add(x,y):
...   return x+y
... 
>>> x = [0,1,2,3]
>>> y = [4,5,6,7]
>>> 
>>> p.map(add, x, y)
[4, 6, 8, 10]
>>> 
>>> class Test(object):
...   def plus(self, x, y): 
...     return x+y
... 
>>> t = Test()
>>> 
>>> p.map(Test.plus, [t]*4, x, y)
[4, 6, 8, 10]
>>> 
>>> p.map(t.plus, x, y)
[4, 6, 8, 10]

And just to be explicit, you can do exactly want you wanted to do in the first place, and you can do it from the interpreter, if you wanted to.

>>> import pathos.pools as pp
>>> class someClass(object):
...   def __init__(self):
...     pass
...   def f(self, x):
...     return x*x
...   def go(self):
...     pool = pp.ProcessPool(4)
...     print pool.map(self.f, range(10))
... 
>>> sc = someClass()
>>> sc.go()
[0, 1, 4, 9, 16, 25, 36, 49, 64, 81]
>>> 

Get the code here: https://github.com/uqfoundation/pathos

TCP keepalive and HTTP keepalive are very different concepts. In TCP, the keepalive is the administrative packet sent to detect stale connection. In HTTP, keepalive means the persistent connection state.

This is from TCP specification,

Keep-alive packets MUST only be sent when no data or acknowledgement packets have been received for the connection within an interval. This interval MUST be configurable and MUST default to no less than two hours.

As you can see, the default TCP keepalive interval is too long for most applications. You might have to add keepalive in your application protocol.

Something like this?

var days = 7;
var date = new Date();
var res = date.setTime(date.getTime() + (days * 24 * 60 * 60 * 1000));
alert(res);

convert to date again:

date = new Date(res);
alert(date)

or alternatively:

date = new Date(res);

// hours part from the timestamp
var hours = date.getHours();

// minutes part from the timestamp
var minutes = date.getMinutes();

// seconds part from the timestamp
var seconds = date.getSeconds();

// will display time in 10:30:23 format
var formattedTime = date + '-' + hours + ':' + minutes + ':' + seconds;
alert(formattedTime)

You should probably try to decouple the fragment from the activity in case you want to use it somewhere else. You can do this by creating a interface that your activity implements.

So you would define an interface like the following:

Suppose for example you wanted to give the activity a String and have it return a Integer:

public interface MyStringListener{
    public Integer computeSomething(String myString);
}

This can be defined in the fragment or a separate file.

Then you would have your activity implement the interface.

public class MyActivity extends FragmentActivity implements MyStringListener{

  @Override
  public Integer computeSomething(String myString){
   /** Do something with the string and return your Integer instead of 0 **/ 
   return 0;
  }

}

Then in your fragment you would have a MyStringListener variable and you would set the listener in fragment onAttach(Activity activity) method.

public class MyFragment {

        private MyStringListener listener;

        @Override
        public void onAttach(Context context) {
            super.onAttach(context);
            try {
                listener = (MyStringListener) context;
            } catch (ClassCastException castException) {
                /** The activity does not implement the listener. */
            }
        }

    }

edit(17.12.2015):onAttach(Activity activity) is deprecated, use onAttach(Context context) instead, it works as intended

The first answer definitely works but it couples your current fragment with the host activity. Its good practice to keep the fragment decoupled from the host activity in case you want to use it in another acitivity.

Try /[^;]*/

That's a negating character class.

I have issues with the earlier suggested solutions:

• @anubhava's solution makes writing bash friendly configuration files very annoying very fast, and also - you may not want to always export your configuration.
• @Silas Paul solution breaks when you have variables that have spaces or other characters that work well in quoted values, but $() makes a mess out of.

Here is my solution, which is still pretty terrible IMO - and doesn't solve the "export only to one child" problem addressed by Silas (though you can probably run it in a sub-shell to limit the scope):

source .conf-file
export $(cut -d= -f1 < .conf-file)

Renaming a column in MySQL :

ALTER TABLE mytable CHANGE current_column_name new_column_name DATATYPE;

Here' an alternative

In Xcode 4 short cut to display and hide console is (command-shift-Y) , this will show the console and debugger below ur text edior in the same window.

Also make sure php is enabled by uncommenting the

LoadModule php5_module libexec/apache2/libphp5.so

line that comes right after

LoadModule rewrite_module libexec/apache2/mod_rewrite.so

Make sure both those lines in

/etc/apache2/httpd.conf

are uncommented.

The urls are different.

• http://localhost/AccountSvc/DataInquiry.asmx

vs.

• /acctinqsvc/portfolioinquiry.asmx

Resolve this issue first, as if the web server cannot resolve the URL you are attempting to POST to, you won't even begin to process the actions described by your request.

You should only need to create the WebRequest to the ASMX root URL, ie: http://localhost/AccountSvc/DataInquiry.asmx, and specify the desired method/operation in the SOAPAction header.

The SOAPAction header values are different.

• http://localhost/AccountSvc/DataInquiry.asmx/ + methodName

vs.

• http://tempuri.org/GetMyName

You should be able to determine the correct SOAPAction by going to the correct ASMX URL and appending ?wsdl

There should be a <soap:operation> tag underneath the <wsdl:operation> tag that matches the operation you are attempting to execute, which appears to be GetMyName.

There is no XML declaration in the request body that includes your SOAP XML.

You specify text/xml in the ContentType of your HttpRequest and no charset. Perhaps these default to us-ascii, but there's no telling if you aren't specifying them!

The SoapUI created XML includes an XML declaration that specifies an encoding of utf-8, which also matches the Content-Type provided to the HTTP request which is: text/xml; charset=utf-8

Hope that helps!

As of October 2014, you can just do something like the following (using JSONStream) - https://www.npmjs.org/package/JSONStream

var fs = require('fs'),
    JSONStream = require('JSONStream'),

var getStream() = function () {
    var jsonData = 'myData.json',
        stream = fs.createReadStream(jsonData, { encoding: 'utf8' }),
        parser = JSONStream.parse('*');
    return stream.pipe(parser);
}

getStream().pipe(MyTransformToDoWhateverProcessingAsNeeded).on('error', function (err) {
    // handle any errors
});

To demonstrate with a working example:

npm install JSONStream event-stream

data.json:

{
  "greeting": "hello world"
}

hello.js:

var fs = require('fs'),
    JSONStream = require('JSONStream'),
    es = require('event-stream');

var getStream = function () {
    var jsonData = 'data.json',
        stream = fs.createReadStream(jsonData, { encoding: 'utf8' }),
        parser = JSONStream.parse('*');
    return stream.pipe(parser);
};

getStream()
    .pipe(es.mapSync(function (data) {
        console.log(data);
    }));

$ node hello.js
// hello world

When using JUnit asserts, I always make the message nice and clear. It saves huge amounts of time debugging. Doing it this way avoids having to add a added dependency on hamcrest Matchers.

previousTokenValues[1] = "1378994409108";
currentTokenValues[1] = "1378994416509";

Long prev = Long.parseLong(previousTokenValues[1]);
Long curr = Long.parseLong(currentTokenValues[1]);
assertTrue("Previous (" + prev + ") should be greater than current (" + curr + ")", prev > curr);

Accessing it like this should work: #content[role="main"]

First

ps -ef

to list all processes. Note the the process number of the one you want to kill. Then

kill 1234

were you replace 1234 with the process number that you want.

Alternatively, if you are absolutely certain that there is only one process with a particular name, or you want to kill multiple processes which share the same name

killall processname

I solved this problem. You can use Support library and ViewPager. If you don't need swiping by gesture you can disable swiping. So here is some code to improve my solution:

public class TestFragment extends Fragment{
@Override
public View onCreateView(LayoutInflater inflater, ViewGroup container, Bundle savedInstanceState) {
    View v = inflater.inflate(R.layout.frag, container, false);
    final ArrayList<Fragment> list = new ArrayList<Fragment>();

    list.add(new TrFrag());
    list.add(new TrFrag());
    list.add(new TrFrag());

    ViewPager pager = (ViewPager) v.findViewById(R.id.pager);
    pager.setAdapter(new FragmentPagerAdapter(getChildFragmentManager()) {
        @Override
        public Fragment getItem(int i) {
            return list.get(i);
        }

        @Override
        public int getCount() {
            return list.size();
        }
    });
    return v;
}
}

P.S.It is ugly code for test, but it improves that it is possible.

P.P.S Inside fragment ChildFragmentManager should be passed to ViewPagerAdapter

I was facing same problem when I installed JRE by Oracle and solved this problem after my research.

I moved the environment path C:\Program Files (x86)\Common Files\Oracle\Java\javapath below H:\Program Files\Java\jdk-13.0.1\bin

Like this:

Path

H:\Program Files\Java\jdk-13.0.1\bin
C:\Program Files (x86)\Common Files\Oracle\Java\javapath

OR

Path

%JAVA_HOME%
%JRE_HOME%

In my case it was because the file was minified with wrong scope. Use Array!

app.controller('StoreController', ['$http', function($http) {
    ...
}]);

Coffee syntax:

app.controller 'StoreController', Array '$http', ($http) ->
  ...

You can enable SSL on XAMPP by creating self signed certificates and then installing those certificates. Type the below commands to generate and move the certificates to ssl folders.

openssl genrsa -des3 -out server.key 1024

openssl req -new -key server.key -out server.csr

cp server.key server.key.org

openssl rsa -in server.key.org -out server.key

openssl x509 -req -days 365 -in server.csr -signkey server.key -out server.crt

cp server.crt /opt/lampp/etc/ssl.crt/domainname.crt

cp server.key /opt/lampp/etc/ssl.key/domainname.key

(Use sudo with each command if you are not the super user)

Now, Check that mod_ssl is enabled in [XAMPP_HOME]/etc/httpd.conf:

LoadModule ssl_module modules/mod_ssl.so

Add a virtual host, in this example "localhost.domainname.com" by editing [XAMPP_HOME]/etc/extra/httpd-ssl.conf as follows:

<virtualhost 127.0.1.4:443>
    ServerName localhost.domainname.com
    ServerAlias localhost.domainname.com *.localhost.domainname.com
    ServerAdmin admin@localhost

    DocumentRoot "/opt/lampp/htdocs/"

    DirectoryIndex index.php

    ErrorLog /opt/lampp/logs/domainname.local.error.log
    CustomLog /opt/lampp/logs/domainname.local.access.log combined

    SSLEngine on
    SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL
    SSLCertificateFile /opt/lampp/etc/ssl.crt/domainname.crt
    SSLCertificateKeyFile /opt/lampp/etc/ssl.key/domainname.key

    <directory /opt/lampp/htdocs/>
            Options Indexes FollowSymLinks
            AllowOverride All
            Order allow,deny
            Allow from all
    </directory>
    BrowserMatch ".*MSIE.*" nokeepalive ssl-unclean-shutdown downgrade-1.0 force-response-1.0
</virtualhost>

Add the following entry to /etc/hosts:

127.0.1.4 localhost.domainname.com

Now, try installing the certificate/ try importing certificate to browser. I have checked this and this worked on Ubuntu.

Try this for getting form input text value to JavaScript object...

var fieldPair = {};
$("#form :input").each(function() {
    if($(this).attr("name").length > 0) {
        fieldPair[$(this).attr("name")] = $(this).val();
    }
});

console.log(fieldPair);

HTML5 Placeholder Attribute

You are likely wanting placeholder functionality:

<input name="Name" placeholder="Enter Your Name" />

Polyfill for Older Browsers

This will not work in some older browsers, but polyfills exist (some require jQuery, others don't) to patch that functionality.

"Screw it, I'll do it myself."

If you wanted to roll your own solution, you could use the onfocus and onblur events of your element to determine what its value should be:

<input name="Name" value="Enter Your Name"
       onfocus="(this.value == 'Enter Your Name') && (this.value = '')"
       onblur="(this.value == '') && (this.value = 'Enter Your Name')" />

Avoid Mixing HTML with JavaScript

You'll find that most of us aren't big fans of evaluating JavaScript from attributes like onblur and onfocus. Instead, it's more commonly encouraged to bind this logic up purely with JavaScript. Granted, it's a bit more verbose, but it keeps a nice separation between your logic and your markup:

var nameElement = document.forms.myForm.Name;

function nameFocus( e ) {
  var element = e.target || window.event.srcElement;
  if (element.value == "Enter Your Name") element.value = "";
}

function nameBlur( e ) {
  var element = e.target || window.event.srcElement;
  if (element.value == "") element.value = "Enter Your Name";
}

if ( nameElement.addEventListener ) {
  nameElement.addEventListener("focus", nameFocus, false);
  nameElement.addEventListener("blur", nameBlur, false);
} else if ( nameElement.attachEvent ) {
  nameElement.attachEvent("onfocus", nameFocus);
  nameElement.attachEvent("onblur", nameBlur);
}

Demo: http://jsbin.com/azehum/2/edit

The easies way i know of is this

function stipTrailingSlash(str){
   if(srt.charAt(str.length-1) == "/"){ str = str.substr(0, str.length - 1);}
   return str
}

This will then check for a / on the end and if its there remove it if its not will return your string as it was

Just one thing that i cant comment on yet @ThiefMaster wow you dont care about memory do you lol runnign a substr just for an if?

Fixed the calucation for zero-based index on the string.

Even if you use exceptions, it still output errors.
You have to set $MailerDebug to False wich should look like this

$mail = new PHPMailer();
$mail->MailerDebug = false;

Set showInLegend to false.

series: [{
            showInLegend: false,
            name: 'Series',
            data: value                
        }]

I had to add both manager-gui and manager-script roles for it to work, in version 9.

After getting the access to MangerApp, while trying to upload .war file, I got the exception

org.apache.tomcat.util.http.fileupload.FileUploadBase$IOFileUploadException

which I was able to solve using the answer of this post

To get access for Host Manager, check this post

Use String.valueOf():

int sdRate=5;
//text_Rate is a TextView
text_Rate.setText(String.valueOf(sdRate)); //no more errors

I read a csv with two columns from bucket s3, and the content of the file csv i put in pandas dataframe.

Example:

config.json

{
  "credential": {
    "access_key":"xxxxxx",
    "secret_key":"xxxxxx"
}
,
"s3":{
       "bucket":"mybucket",
       "key":"csv/user.csv"
   }
}

cls_config.json

#!/usr/bin/env python
# -*- coding: utf-8 -*-

import os
import json

class cls_config(object):

    def __init__(self,filename):

        self.filename = filename


    def getConfig(self):

        fileName = os.path.join(os.path.dirname(__file__), self.filename)
        with open(fileName) as f:
        config = json.load(f)
        return config

cls_pandas.py

#!/usr/bin/env python
# -*- coding: utf-8 -*-

import pandas as pd
import io

class cls_pandas(object):

    def __init__(self):
        pass

    def read(self,stream):

        df = pd.read_csv(io.StringIO(stream), sep = ",")
        return df

cls_s3.py

#!/usr/bin/env python
# -*- coding: utf-8 -*-

import boto3
import json

class cls_s3(object):

    def  __init__(self,access_key,secret_key):

        self.s3 = boto3.client('s3', aws_access_key_id=access_key, aws_secret_access_key=secret_key)

    def getObject(self,bucket,key):

        read_file = self.s3.get_object(Bucket=bucket, Key=key)
        body = read_file['Body'].read().decode('utf-8')
        return body

test.py

#!/usr/bin/env python
# -*- coding: utf-8 -*-

from cls_config import *
from cls_s3 import *
from cls_pandas import *

class test(object):

    def __init__(self):
        self.conf = cls_config('config.json')

    def process(self):

        conf = self.conf.getConfig()

        bucket = conf['s3']['bucket']
        key = conf['s3']['key']

        access_key = conf['credential']['access_key']
        secret_key = conf['credential']['secret_key']

        s3 = cls_s3(access_key,secret_key)
        ob = s3.getObject(bucket,key)

        pa = cls_pandas()
        df = pa.read(ob)

        print df

if __name__ == '__main__':
    test = test()
    test.process()

public class NumberFormatExceptionExample {
private static final String str = "123.234";
public static void main(String[] args){
float i = Float.valueOf(str); //Float.parseFloat(str);
System.out.println("Value parsed :"+i);
}
}

This should resolve the problem.

Can anyone suggest how should we handle this when the string comes in 35,000.00

Background

Invariant's answer is a good resource for how everything was started and what was the state of JavaFX on embedded and mobile in beginning of 2014. But, a lot has changed since then and the users who stumble on this thread do not get the updated information.

Most of my points are related to Invariant's answer, so I would suggest to go through it first.

Current Status of JavaFX on Mobile / Embedded

UPDATE

JavaFXPorts has been deprecated. Gluon Mobile now uses GraalVM underneath. There are multiple advantages of using GraalVM. Please check this blogpost from Gluon. The IDE plugins have been updated to use Gluon Client plugins which leverages GraalVM to AOT compile applications for Android/iOS.

Old answer with JavaFXPorts

Some bad news first:

• RoboVM is dead
• Oracle killed JavaFX on Embedded Devices

Now, some good news:

• JavaFX still runs on Android, iOS and most of the Embedded devices
• JavaFXPorts SDK for android, iOS and embedded devices can be downloaded from here
• JavaFXPorts project is still thriving and it is easier than ever to run JavaFX on mobile devices, all thanks to the IDE plugins that is built on top of these SDKs and gets you started in a few minutes without the hassle of installing any SDK
• JavaFX 3D is now supported on mobile devices
• GluonVM to replace RoboVM enabling Java 9 support for mobile developers. Yes, you heard it right.
• Mobile Project has been launched by Oracle to support JDK on all major mobile platforms. It should support JavaFX as well ;)

How to get started

If you are not the DIY kind, I would suggest to install the IDE plugin on your favourite IDE and get started.

Most of the documentation on how to get started can be found here and some of the samples can be found here.

On supporting browsers, you can use DOM elements' classList property.

$(element)[0].classList

It is an array-like object listing all of the classes the element has.

If you need to support old browser versions that don't support the classList property, the linked MDN page also includes a shim for it - although even the shim won't work on Internet Explorer versions below IE 8.

If you want to create a garage and fill it up with new cars that can be accessed later, use this code:

for (int i = 0; i < garage.length; i++)
     garage[i] = new Car("argument");

Also, the cars are later accessed using:

garage[0];
garage[1];
garage[2];
etc.

I tried many solutions for this, and this is the one that worked for me :

1.commit/save container to new image :

1. ++ commit the container:
   # docker stop
   # docker commit CONTAINER_NAME
   # docker save --output IMAGE_NAME.tar IMAGE_NAME:TAG
   
   

ps:"Our container CONTAINER_NAME has a mounted volume at '/var/home'" ( you have to inspect your container to specify its volume path : # docker inspect CONTAINER_NAME )

2. ++ save its volume : we will use an ubuntu image to do the thing.
   # mkdir backup
   # docker run --rm --volumes-from CONTAINER_NAME -v ${pwd}/backup:/backup ubuntu bash -c “cd /var/home && tar cvf /backup/volume_backup.tar .”
   
   

Now when you look at ${pwd}/backup , you will find our volume under tar format.
Until now, we have our conatainer's image 'IMAGE_NAME.tar' and its volume 'volume_backup.tar'.

Now you can , recreate the same old container on a new host.

I was about to go mental trying to fix this, for me the issue was that Cloudflare had cached the php file and kept making me download it.

The fix for me was to purge the cache on Cloudflare.

Here goes:

DECLARE @var nvarchar(max) = 'Man''s best friend';

You will note that the ' is escaped by doubling it to ''.

Since the string delimiter is ' and not ", there is no need to escape ":

DECLARE @var nvarchar(max) = '"My Name is Luca" is a great song';

The second example in the MSDN page on DECLARE shows the correct syntax.

In python, this concatenates with blank lines between files (the , suppresses adding an extra trailing blank line):

print '\n'.join(open(f).read() for f in filenames),

Here is the ugly python one-liner that can be called from the shell and prints the output to a file:

python -c "from sys import argv; print '\n'.join(open(f).read() for f in argv[1:])," File*.txt > finalfile.txt

Try this...

var key = words.Where(x => x.IsKey == true);

This is a Python3 function for converting any text file into the one with UTF-8 encoding. (without using unnecessary packages)

def correctSubtitleEncoding(filename, newFilename, encoding_from, encoding_to='UTF-8'):
    with open(filename, 'r', encoding=encoding_from) as fr:
        with open(newFilename, 'w', encoding=encoding_to) as fw:
            for line in fr:
                fw.write(line[:-1]+'\r\n')

You can use it easily in a loop to convert a list of files.

You can use

  long startTime = date.getTime() * 1000000;;
  long estimatedTime = System.nanoTime() - startTime;

To get time in nano.

Java Docs

Cross join will help to join multiple tables with no common fields.But be careful while joining as this join will give cartesian resultset of two tables. QUERY:

SELECT 
   table1.columnA
 , table2,columnA
FROM table1 
CROSS JOIN table2

Alternative way to join on some condition that is always true like

SELECT 
   table1.columnA
 , table2,columnA
FROM table1 
INNER JOIN table2 ON 1=1

But this type of query should be avoided for performance as well as coding standards.

Newer versions of pip (8 or later) can directly use the --prefix option:

pip install --prefix=$PREFIX_PATH package_name

where $PREFIX_PATH is the installation prefix where lib, bin and other top-level folders are placed.

I was facing some problem from SQL PLUS Command Promt.

So I resolve this issue from windows CMD ,I follow such steps--->

1: open CMD (Windows)

2: type show pdbs;

   now u have to unmount the data base which is mounted

3: type alter pluggable database database_Name open;

4: type show pdbs;(for cross check)

It works for me

For Spring 5.2+ this works for me:

@PostMapping("/foo")
ResponseEntity<Void> foo(@PathVariable UUID fooId) {
    return fooService.findExam(fooId)
            .map(uri -> ResponseEntity.noContent().<Void>build())
            .orElse(ResponseEntity.notFound().build());
}

the bottom cell will grow as you enter more text ... setting the table width will help too

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">

<head>
</head>
<body>
<table id="content" style="min-height:525px; height:525px; width:100%; border:0px; margin:0; padding:0; border-collapse:collapse;">
<tr><td style="height:10px; background-color:#900;">Upper</td></tr>
<tr><td style="min-height:515px; height:515px; background-color:#909;">lower<br/>
</td></tr>
</table>
</body>
</html>

String str = "saveMe"
compareString(str)

def compareString(String str){
  def str2 = "saveMe"

  // using single quotes
  println 'single quote string class' + 'String.class'.class
  println str + ' == ' + str2 + " ? " + (str == str2)
  println ' str = ' +  '$str' //  interpolation not supported

  // using double quotes, Interpolation supported
  println "double quoted string with interpolation " + "GString.class $str".class
  println "double quoted string without interpolation " + "String.class".class
  println "$str equals $str2 ? " + str.equals(str2) 
  println '$str == $str2 ? ' + "$str==$str2"
  println '${str == str2} ? ' + "${str==str2} ? "

  println '$str equalsIgnoreCase $str2 ? ' + str.equalsIgnoreCase(str2)   

  println '''
  triple single quoted Multi-line string, Interpolation not supported $str ${str2}
  Groovy has also an operator === that can be used for objects equality
  === is equivalent to o1.is(o2)
  '''
  println '''
  triple quoted string 
  '''
  println 'triple single quoted string ' + '''' string '''.class

  println """ 
  triple double quoted Multi-line string, Interpolation is supported $str == ${str2}
  just like double quoted strings with the addition that they are multiline
  '\${str == str2} ? ' ${str == str2} 
  """
  println 'triple double quoted string ' + """ string """.class
} 

output:

single quote string classclass java.lang.String
saveMe == saveMe ? true
str = $str
double quoted string with interpolation class org.codehaus.groovy.runtime.GStringImpl
double quoted string without interpolation class java.lang.String
saveMe equals saveMe ? true
$str == $str2 ? saveMe==saveMe
${str == str2} ? true ? 
$str equalsIgnoreCase $str2 ? true 

triple single quoted Multi-line string, Interpolation not supported $str ${str2}
Groovy has also an operator === that can be used for objects equality
=== is equivalent to o1.is(o2)


triple quoted string 

triple single quoted string class java.lang.String

triple double quoted Multi-line string, Interpolation is supported saveMe == saveMe
just like double quoted strings with the addition that they are multiline
'${str == str2} ? ' true 

triple double quoted string class java.lang.String

On StackOverflow, pressing the up-vote button is AJAX whereas typing in your question or answer and seeing it appear in the real-time preview window below it is JavaScript (JQuery).

This means that the difference between AJAX and Javascript is that AJAX allows you to communicate with the server without doing a page refresh (i.e. going to a new page) whereas JavaScript (JQuery) allows you to embed logic and behaviour on your page. Of course, with this logic you create AJAX as well.

The error message tells you exactly what's wrong. The Python interpreter needs to know the encoding of the non-ASCII character.

If you want to return U+00A3 then you can say

return u'\u00a3'

which represents this character in pure ASCII by way of a Unicode escape sequence. If you want to return a byte string containing the literal byte 0xA3, that's

return b'\xa3'

(where in Python 2 the b is implicit; but explicit is better than implicit).

The linked PEP in the error message instructs you exactly how to tell Python "this file is not pure ASCII; here's the encoding I'm using". If the encoding is UTF-8, that would be

# coding=utf-8

or the Emacs-compatible

# -*- encoding: utf-8 -*-

If you don't know which encoding your editor uses to save this file, examine it with something like a hex editor and some googling. The Stack Overflow character-encoding tag has a tag info page with more information and some troubleshooting tips.

In so many words, outside of the 7-bit ASCII range (0x00-0x7F), Python can't and mustn't guess what string a sequence of bytes represents. https://tripleee.github.io/8bit#a3 shows 21 possible interpretations for the byte 0xA3 and that's only from the legacy 8-bit encodings; but it could also very well be the first byte of a multi-byte encoding. But in fact, I would guess you are actually using Latin-1, so you should have

# coding: latin-1

as the first or second line of your source file. Anyway, without knowledge of which character the byte is supposed to represent, a human would not be able to guess this, either.

A caveat: coding: latin-1 will definitely remove the error message (because there are no byte sequences which are not technically permitted in this encoding), but might produce completely the wrong result when the code is interpreted if the actual encoding is something else. You really have to know the encoding of the file with complete certainty when you declare the encoding.

You can use header files.

Good practice.

You can create a file called player.h declare all functions that are need by other cpp files in that header file and include it when needed.

player.h

#ifndef PLAYER_H    // To make sure you don't declare the function more than once by including the header multiple times.
#define PLAYER_H

#include "stdafx.h"
#include <SFML/Graphics.hpp>

int playerSprite();

#endif

player.cpp

#include "player.h"  // player.h must be in the current directory. or use relative or absolute path to it. e.g #include "include/player.h"

int playerSprite(){
    sf::Texture Texture;
    if(!Texture.loadFromFile("player.png")){
        return 1;
    }
    sf::Sprite Sprite;
    Sprite.setTexture(Texture);
    return 0;
}

main.cpp

#include "stdafx.h"
#include <SFML/Graphics.hpp>
#include "player.h"            //Here. Again player.h must be in the current directory. or use relative or absolute path to it.

int main()
{
    // ...
    int p = playerSprite();  
    //...

Not such a good practice but works for small projects. declare your function in main.cpp

#include "stdafx.h"
#include <SFML/Graphics.hpp>
// #include "player.cpp"


int playerSprite();  // Here

int main()
{
    // ...   
    int p = playerSprite();  
    //...

After lots of research, I've come up with this answer, and I'm hereby putting it here as an answer for my own question, for reference:

1. Make sure that "Enable access for assistive devices" is checked in System Preferences>>Universal Access. It is required for the AppleScript to work. You may have to reboot after this change (it doesn't work otherwise on Mac OS X Server 10.4).

2. Create a R/W DMG. It must be larger than the result will be. In this example, the bash variable "size" contains the size in Kb and the contents of the folder in the "source" bash variable will be copied into the DMG:

   hdiutil create -srcfolder "${source}" -volname "${title}" -fs HFS+ \
         -fsargs "-c c=64,a=16,e=16" -format UDRW -size ${size}k pack.temp.dmg
   

3. Mount the disk image, and store the device name (you might want to use sleep for a few seconds after this operation):

   device=$(hdiutil attach -readwrite -noverify -noautoopen "pack.temp.dmg" | \
            egrep '^/dev/' | sed 1q | awk '{print $1}')
   

4. Store the background picture (in PNG format) in a folder called ".background" in the DMG, and store its name in the "backgroundPictureName" variable.

5. Use AppleScript to set the visual styles (name of .app must be in bash variable "applicationName", use variables for the other properties as needed):

   echo '
      tell application "Finder"
        tell disk "'${title}'"
              open
              set current view of container window to icon view
              set toolbar visible of container window to false
              set statusbar visible of container window to false
              set the bounds of container window to {400, 100, 885, 430}
              set theViewOptions to the icon view options of container window
              set arrangement of theViewOptions to not arranged
              set icon size of theViewOptions to 72
              set background picture of theViewOptions to file ".background:'${backgroundPictureName}'"
              make new alias file at container window to POSIX file "/Applications" with properties {name:"Applications"}
              set position of item "'${applicationName}'" of container window to {100, 100}
              set position of item "Applications" of container window to {375, 100}
              update without registering applications
              delay 5
              close
        end tell
      end tell
   ' | osascript
   

6. Finialize the DMG by setting permissions properly, compressing and releasing it:

   chmod -Rf go-w /Volumes/"${title}"
   sync
   sync
   hdiutil detach ${device}
   hdiutil convert "/pack.temp.dmg" -format UDZO -imagekey zlib-level=9 -o "${finalDMGName}"
   rm -f /pack.temp.dmg 
   

On Snow Leopard, the above applescript will not set the icon position correctly - it seems to be a Snow Leopard bug. One workaround is to simply call close/open after setting the icons, i.e.:

..
set position of item "'${applicationName}'" of container window to {100, 100}
set position of item "Applications" of container window to {375, 100}
close
open

You can use MutationObserver class.

MutationObserver provides developers a way to react to changes in a DOM. It is designed as a replacement for Mutation Events defined in the DOM3 Events specification.

Example (source)

// select the target node
var target = document.querySelector('#some-id');

// create an observer instance
var observer = new MutationObserver(function(mutations) {
  mutations.forEach(function(mutation) {
    console.log(mutation.type);
  });    
});

// configuration of the observer:
var config = { attributes: true, childList: true, characterData: true };

// pass in the target node, as well as the observer options
observer.observe(target, config);

// later, you can stop observing
observer.disconnect();

Just one line of coding is enough.. just try this out. and you can adjust even thicknes of icon-bar with this by adding pixels.

HTML

<div class="navbar-header">
  <button type="button" class="navbar-toggle collapsed" data-toggle="collapse" data-target="#defaultNavbar1" aria-expanded="false"><span class="sr-only">Toggle navigation</span>

  <span class="icon-bar"></span>
  <span class="icon-bar"></span>
  <span class="icon-bar"></span>

  </button>
  <a class="navbar-brand" href="#" <span class="icon-bar"></span><img class="img-responsive brand" src="img/brand.png">
  </a></div>

CSS

    .navbar-toggle, .icon-bar {
    border:1px solid orange;
}

BOOM...

Check out our jQuery-ClearSearch plugin. It's a configurable jQuery plugin - adapting it to your needs by styling the input field is straightforward. Just use it as follows:

<input class="clearable" type="text" placeholder="search">

<script type="text/javascript">
    $('.clearable').clearSearch();
</script>

? Example: http://jsfiddle.net/wldaunfr/FERw3/

        aspx code

            <asp:FileUpload ID="FileUpload1" runat="server" AllowMultiple="true" />
            <asp:Button ID="btnUpload" Text="Upload" runat="server" OnClick ="UploadMultipleFiles" accept ="image/gif, image/jpeg" />
            <hr />
            <asp:Label ID="lblSuccess" runat="server" ForeColor ="Green" />


    Code Behind:

protected void UploadMultipleFiles(object sender, EventArgs e)
{
     foreach (HttpPostedFile postedFile in FileUpload1.PostedFiles)
     {
          string fileName = Path.GetFileName(postedFile.FileName);
          postedFile.SaveAs(Server.MapPath("~/Uploads/") + fileName);
     }
     lblSuccess.Text = string.Format("{0} files have been uploaded successfully.", FileUpload1.PostedFiles.Count);
}

The format you need is:

'2007-01-01 10:00:00'

i.e. yyyy-MM-dd HH:mm:ss

If possible, however, use a parameterised query as this frees you from worrying about the formatting details.

Voilà:

body {
   background-color: #000; /*Default bg, similar to the background's base color*/
   background-image: url("bg.png");
   background-position: right bottom; /*Positioning*/
   background-repeat: no-repeat; /*Prevent showing multiple background images*/
}

The background properties can be combined together, in one background property. See also: https://developer.mozilla.org/en/CSS/background-position

Okay, since it already "leaked": You're missing zero, so the correct answer is 512 (511 is the greatest one, but it's 0 to 511, not 1 to 511).

By the way, an good followup exercise would be to generalize this:

How many different values can be represented in n binary digits (bits)?

I found the solution : it's the 9th byte of this key :

[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Connections] "DefaultConnectionSettings"=hex:3c,00,00,00,1f,00,00,00,05,00,00,00,00,00,00, 00,00,00,00,00,00,00,00,00,01,00,00,00,1f,00,00,00,68,74,74,70,3a,2f,2f,31, 34,34,2e,31,33,31,2e,32,32,32,2e,31,36,37,2f,77,70,61,64,2e,64,61,74,90,0e, 1e,66,d3,88,c5,01,01,00,00,00,8d,a8,4e,9e,00,00,00,00,00,00,00,00

It's a bitfield:

• 0x1: (Always 1)
• 0x2: Proxy enabled
• 0x4: "Use automatic configuration script" checked
• 0x8: "Automatically detect settings" checked

Mask 0x8 to turn it off, i.e., subtract 8 if it's higher than 8.

Thanks to Jamie on google groups.

Update

Based on the VBScript by WhoIsRich combined with details in this answer, here's a PowerShell script to amend these & related settings:

function Set-ProxySettings {
    [CmdletBinding()]
    param ( #could improve with parameter sets 
        [Parameter(Mandatory = $false)]
        [bool]$AutomaticDetect = $true
        ,
        [Parameter(Mandatory = $false)]
        [bool]$UseProxyForLAN = $false
        ,
        [Parameter(Mandatory = $false)]
        [AllowNull()][AllowEmptyString()]
        [string]$ProxyAddress = $null
        ,
        [Parameter(Mandatory = $false)]
        [int]$ProxyPort = 8080 #closest we have to a default port for proxies
        ,
        [AllowNull()][AllowEmptyString()]
        [bool]$UseAutomaticConfigurationScript = $false
    )
    begin {
        [string]$ProxyRegRoot = 'HKCU:\Software\Microsoft\Windows\CurrentVersion\Internet Settings'
        [string]$DefaultConnectionSettingsPath = (Join-Path $ProxyRegRoot 'Connections')
        [byte]$MaskProxyEnabled = 2
        [byte]$MaskUseAutomaticConfigurationScript = 4
        [byte]$MaskAutomaticDetect = 8
        [int]$ProxyConnectionSettingIndex = 8
    }
    process {
    #this setting is affected by multiple options, so fetch once here 
    [byte[]]$DefaultConnectionSettings = Get-ItemProperty -Path $DefaultConnectionSettingsPath -Name 'DefaultConnectionSettings' | Select-Object -ExpandProperty 'DefaultConnectionSettings'

    #region auto detect
    if($AutomaticDetect) { 
        Set-ItemProperty -Path $ProxyRegRoot -Name AutoDetect -Value 1
        $DefaultConnectionSettings[$ProxyConnectionSettingIndex] = $DefaultConnectionSettings[$ProxyConnectionSettingIndex] -bor $MaskAutomaticDetect
    } else {
        Set-ItemProperty -Path $ProxyRegRoot -Name AutoDetect -Value 0
        $DefaultConnectionSettings[$ProxyConnectionSettingIndex] = $DefaultConnectionSettings[$ProxyConnectionSettingIndex] -band (-bnot $MaskAutomaticDetect)
    }
    #endregion

    #region defined proxy
    if($UseProxyForLAN) {
        if(-not ([string]::IsNullOrWhiteSpace($ProxyAddress))) {
            Set-ItemProperty -Path $ProxyRegRoot -Name ProxyServer -Value ("{0}:{1}" -f $ProxyAddress,$ProxyPort)
        }
        Set-ItemProperty -Path $ProxyRegRoot -Name ProxyEnable -Value 1
        $DefaultConnectionSettings[$ProxyConnectionSettingIndex] = $DefaultConnectionSettings[$ProxyConnectionSettingIndex] -bor $MaskProxyEnabled
    } else {
        Set-ItemProperty -Path $ProxyRegRoot -Name ProxyEnable -Value 0        
        $DefaultConnectionSettings[$ProxyConnectionSettingIndex] = $DefaultConnectionSettings[$ProxyConnectionSettingIndex] -band (-bnot $MaskProxyEnabled)
    }
    #endregion

    #region config script
    if($UseAutomaticConfigurationScript){
        $DefaultConnectionSettings[$ProxyConnectionSettingIndex] = $DefaultConnectionSettings[$ProxyConnectionSettingIndex] -bor $MaskUseAutomaticConfigurationScript
    }else{
        $DefaultConnectionSettings[$ProxyConnectionSettingIndex] = $DefaultConnectionSettings[$ProxyConnectionSettingIndex] -band (-bnot $MaskUseAutomaticConfigurationScript) 
    }
    #endregion

    #persist the updates made above
    Set-ItemProperty -Path $DefaultConnectionSettingsPath -Name 'DefaultConnectionSettings' -Value $DefaultConnectionSettings
    }
}

For future reference Python is strongly typed. Unlike other dynamic languages, it will not automagically cast objects from one type or the other (say from str to int) so you must do this yourself. You'll like that in the long-run, trust me!

Try This. You need pass the authentication to let the server know its a valid user. You need to import these two packages and has to include a jersy jar. If you dont want to include jersy jar then import this package

import sun.misc.BASE64Encoder;

import com.sun.jersey.core.util.Base64;
import sun.net.www.protocol.http.HttpURLConnection;

and then,

String encodedAuthorizedUser = getAuthantication("username", "password");
URL url = new URL("Your Valid Jira URL");
HttpURLConnection httpCon = (HttpURLConnection) url.openConnection();
httpCon.setRequestProperty ("Authorization", "Basic " + encodedAuthorizedUser );

 public String getAuthantication(String username, String password) {
   String auth = new String(Base64.encode(username + ":" + password));
   return auth;
 }

Press F8 for temporarily freezing / unfreezing JS (with DevTools open).

This is very useful for debugging UI issues on elements that may lose focus if you click or press anything outside of that element. (Chrome 71.0.3578.98, Ubuntu 18.10)

Multimap<Integer, String> multimap = ArrayListMultimap.create();

multimap.put(1, "A");
multimap.put(1, "B");
multimap.put(1, "C");
multimap.put(1, "A");

multimap.put(2, "A");
multimap.put(2, "B");
multimap.put(2, "C");

multimap.put(3, "A");

System.out.println(multimap.get(1));
System.out.println(multimap.get(2));       
System.out.println(multimap.get(3));

Output is:

[A,B,C,A]
[A,B,C]
[A]

Note: we need to import library files.

http://www.java2s.com/Code/Jar/g/Downloadgooglecollectionsjar.htm

import com.google.common.collect.ArrayListMultimap;
import com.google.common.collect.Multimap;

or https://commons.apache.org/proper/commons-collections/download_collections.cgi

import org.apache.commons.collections.MultiMap;
import org.apache.commons.collections.map.MultiValueMap;

Select all text afected by this issue:

Window -> Character, click the icon next to hide the Character Window, Middle Western Features and select Left-to-right character direction.

You need to log in with the correct username and password. Does the user root have permission to access the database? or did you create a specific user to do this?

The other issue might be that you are not using a password when trying to log in.

Make sure to set cwd in the pm2 config to the correct directory for any calls to dotenv.config().

Example: Your index.js file is in /app/src, your .env file is in /app. Your index.js file has this

dotenv.config({path: "../.env"});

Your pm2 json config should have this: "cwd": "/app/src", "script": "index.js"

You could also use dotenv.config({path: path.join(__dirname, "../.env")}); to avoid the CWD issue. You will still have a problem if you move the .env or the index.js file relative to each other.

On Ubuntu Bionic 18.04, this works as desired:

$ echo -e "testing email via yourisp.com from command line\n\nsent on: $(date)" | mailx --append='FROM:Foghorn Leghorn <[email protected]>' -s "test cli email $(date)" -- [email protected]

Also try dojo.number which has built-in localization support. It is a much closer analog to Java's NumberFormat/DecimalFormat

Depending upon the design being produced, each of the below clearfix CSS solutions has its own benefits.

The clearfix does have useful applications but it has also been used as a hack. Before you use a clearfix perhaps these modern css solutions can be useful:

• css flexbox
• css grid

Modern Clearfix Solutions

Container with overflow: auto;

The simplest way to clear floated elements is using the style overflow: auto on the containing element. This solution works in every modern browsers.

<div style="overflow: auto;">
  <img
    style="float: right;"
    src="path/to/floated-element.png"
    width="500"
    height="500"
  > 
  <p>Your content here…</p>
</div>

One downside, using certain combinations of margin and padding on the external element can cause scrollbars to appear but this can be solved by placing the margin and padding on another parent containing element.

Using ‘overflow: hidden’ is also a clearfix solution, but will not have scrollbars, however using hidden will crop any content positioned outside of the containing element.

Note: The floated element is an img tag in this example, but could be any html element.

Clearfix Reloaded

Thierry Koblentz on CSSMojo wrote: The very latest clearfix reloaded. He noted that by dropping support for oldIE, the solution can be simplified to one css statement. Additionally, using display: block (instead of display: table) allows margins to collapse properly when elements with clearfix are siblings.

.container::after {
  content: "";
  display: block;
  clear: both;
}

This is the most modern version of the clearfix.

?

?

Older Clearfix Solutions

The below solutions are not necessary for modern browsers, but may be useful for targeting older browsers.

Note that these solutions rely upon browser bugs and therefore should be used only if none of the above solutions work for you.

They are listed roughly in chronological order.

"Beat That ClearFix", a clearfix for modern browsers

Thierry Koblentz' of CSS Mojo has pointed out that when targeting modern browsers, we can now drop the zoom and ::before property/values and simply use:

.container::after {
    content: "";
    display: table;
    clear: both;
}

This solution does not support for IE 6/7 …on purpose!

Thierry also offers: "A word of caution: if you start a new project from scratch, go for it, but don’t swap this technique with the one you have now, because even though you do not support oldIE, your existing rules prevent collapsing margins."

Micro Clearfix

The most recent and globally adopted clearfix solution, the Micro Clearfix by Nicolas Gallagher.

Known support: Firefox 3.5+, Safari 4+, Chrome, Opera 9+, IE 6+

.container::before, .container::after {
  content: "";
  display: table;
}
.container::after {
  clear: both;
}
.container {
  zoom: 1;
}

Overflow Property

This basic method is preferred for the usual case, when positioned content will not show outside the bounds of the container.

http://www.quirksmode.org/css/clearing.html - explains how to resolve common issues related to this technique, namely, setting width: 100% on the container.

.container {
  overflow: hidden;
  display: inline-block;
  display: block;
}

Rather than using the display property to set "hasLayout" for IE, other properties can be used for triggering "hasLayout" for an element.

.container {
  overflow: hidden;
  zoom: 1;
  display: block;
}

Another way to clear floats using the overflow property is to use the underscore hack. IE will apply the values prefixed with the underscore, other browsers will not. The zoom property triggers hasLayout in IE:

.container {
  overflow: hidden;
  _overflow: visible; /* for IE */
  _zoom: 1; /* for IE */
}

While this works... it is not ideal to use hacks.

PIE: Easy Clearing Method

This older "Easy Clearing" method has the advantage of allowing positioned elements to hang outside the bounds of the container, at the expense of more tricky CSS.

This solution is quite old, but you can learn all about Easy Clearing on Position Is Everything: http://www.positioniseverything.net/easyclearing.html

Element using "clear" property

The quick and dirty solution (with some drawbacks) for when you’re quickly slapping something together:

<br style="clear: both" /> <!-- So dirty! -->

Drawbacks

• It's not responsive and thus may not provide the desired effect if layout styles change based upon media queries. A solution in pure CSS is more ideal.
• It adds html markup without necessarily adding any semantic value.
• It requires a inline definition and solution for each instance rather than a class reference to a single solution of a “clearfix” in the css and class references to it in the html.
• It makes code difficult to work with for others as they may have to write more hacks to work around it.
• In the future when you need/want to use another clearfix solution, you won't have to go back and remove every <br style="clear: both" /> tag littered around the markup.

Something I'd like to add, since this is error 191 first question on google:

When redirecting to facebook instead of your own site for a signed request, you might experience this error if the user has secure browsing on and your app does redirect to facebook without SSL.

If the error is in PHP code, you can use error_reporting() function within your code to set to the report all.

However, this does not handle the situation when PHP crashes. Information about that is only available in server logs. Maybe you don't have access to those, but many hosting providers I've worked with have some way to let you access it. For example, the approach I like best is that it creates the error_log file in the current directory where .php resides. Try searching there or contact your hosting provider about this.

UPDATE
    T1
SET
    T1.Inci = T2.Inci 
FROM
    T1
INNER JOIN
    T2
ON
    T1.Brands = T2.Brands
AND
    T1.Category= T2.Category
AND
    T1.Date = T2.Date

I'm a little late to the game here, but the simple answer is to move the H4 AFTER the button div. This is a common issue when floating, always have your floats defined BEFORE the rest of the contents or you'll have that extra line-break problem.

<div class="panel-heading">
    <div class="btn-group pull-right">
        <a href="#" class="btn btn-default btn-sm">## Lock</a>
        <a href="#" class="btn btn-default btn-sm">## Delete</a>
        <a href="#" class="btn btn-default btn-sm">## Move</a>
    </div>
    <h4>Panel header</h4>
</div>

The issue here is that when your floats are defined after other items, the float's top will start at the last line-position of the element immediately before it. So, if the previous item wraps to line 3, your float will start at line 3 too.

Moving the float to the TOP of the list eliminates the issue because there are no previous elements to push it down and anything after the float will be rendered at the top line (assuming there is room on the line for all items)

Example of correct and incorrect ordering and the effects: http://www.bootply.com/HkDlNIKv9g

This is one approach using promisify and two help functions (to and toAll) to resolve the promise.

It does all actions asynchrounous.

const fs = require('fs');
const { promisify } = require('util');
const to = require('./to');
const toAll = require('./toAll');

const readDirAsync = promisify(fs.readdir);
const rmDirAsync = promisify(fs.rmdir);
const unlinkAsync = promisify(fs.unlink);

/**
    * @author Aécio Levy
    * @function removeDirWithFiles
    * @usage: remove dir with files
    * @param {String} path
    */
const removeDirWithFiles = async path => {
    try {
        const file = readDirAsync(path);
        const [error, files] = await to(file);
        if (error) {
            throw new Error(error)
        }
        const arrayUnlink = files.map((fileName) => {
            return unlinkAsync(`${path}/${fileName}`);
        });
        const [errorUnlink, filesUnlink] = await toAll(arrayUnlink);
        if (errorUnlink) {
            throw new Error(errorUnlink);
        }
        const deleteDir = rmDirAsync(path);
        const [errorDelete, result] = await to(deleteDir);
        if (errorDelete) {
            throw new Error(errorDelete);
        }
    } catch (err) {
        console.log(err)
    }
}; 

My personal preference is to put it in ~/opt/local/android-sdk-mac or /Developer/android-sdk-mac the latter being where Xcode and all the Apple Dev tools are held.

You can, using CSS variables (more precisely called CSS custom properties).

• Set your variable in your style attribute:
  style="--my-color-var: orange;"
• Use the variable in your stylesheet:
  background-color: var(--my-color-var);

Browser compatibility

Minimal example:

div {
  width: 100px;
  height: 100px;
  position: relative;
  border: 1px solid black;
}

div:after {
  background-color: var(--my-color-var);
  content: '';
  position: absolute;
  top: 0;
  bottom: 0;
  right: 0;
  left: 0;
}

<div style="--my-color-var: orange;"></div>

Your example:

.bubble {
  position: relative;
  width: 30px;
  height: 15px;
  padding: 0;
  background: #FFF;
  border: 1px solid #000;
  border-radius: 5px;
  text-align: center;
  background-color: var(--bubble-color);
}

.bubble:after {
  content: "";
  position: absolute;
  top: 4px;
  left: -4px;
  border-style: solid;
  border-width: 3px 4px 3px 0;
  border-color: transparent var(--bubble-color);
   display: block;
  width: 0;
  z-index: 1;
  
}

.bubble:before {
  content: "";
  position: absolute;
  top: 4px;
  left: -5px;
  border-style: solid;
  border-width: 3px 4px 3px 0;
  border-color: transparent #000;
  display: block;
  width: 0;
  z-index: 0;
}

<div class='bubble' style="--bubble-color: rgb(100,255,255);"> 100 </div>

Assuming that you are using Java 1.5, and that you cannot add Google Collections, I would do something very similar to what the Google guys did. This is a slight variation on Jon's comments.

First add this interface to your codebase.

public interface IPredicate<T> { boolean apply(T type); }

Its implementers can answer when a certain predicate is true of a certain type. E.g. If T were User and AuthorizedUserPredicate<User> implements IPredicate<T>, then AuthorizedUserPredicate#apply returns whether the passed in User is authorized.

Then in some utility class, you could say

public static <T> Collection<T> filter(Collection<T> target, IPredicate<T> predicate) {
    Collection<T> result = new ArrayList<T>();
    for (T element: target) {
        if (predicate.apply(element)) {
            result.add(element);
        }
    }
    return result;
}

So, assuming that you have the use of the above might be

Predicate<User> isAuthorized = new Predicate<User>() {
    public boolean apply(User user) {
        // binds a boolean method in User to a reference
        return user.isAuthorized();
    }
};
// allUsers is a Collection<User>
Collection<User> authorizedUsers = filter(allUsers, isAuthorized);

If performance on the linear check is of concern, then I might want to have a domain object that has the target collection. The domain object that has the target collection would have filtering logic for the methods that initialize, add and set the target collection.

UPDATE:

In the utility class (let's say Predicate), I have added a select method with an option for default value when the predicate doesn't return the expected value, and also a static property for params to be used inside the new IPredicate.

public class Predicate {
    public static Object predicateParams;

    public static <T> Collection<T> filter(Collection<T> target, IPredicate<T> predicate) {
        Collection<T> result = new ArrayList<T>();
        for (T element : target) {
            if (predicate.apply(element)) {
                result.add(element);
            }
        }
        return result;
    }

    public static <T> T select(Collection<T> target, IPredicate<T> predicate) {
        T result = null;
        for (T element : target) {
            if (!predicate.apply(element))
                continue;
            result = element;
            break;
        }
        return result;
    }

    public static <T> T select(Collection<T> target, IPredicate<T> predicate, T defaultValue) {
        T result = defaultValue;
        for (T element : target) {
            if (!predicate.apply(element))
                continue;
            result = element;
            break;
        }
        return result;
    }
}

The following example looks for missing objects between collections:

List<MyTypeA> missingObjects = (List<MyTypeA>) Predicate.filter(myCollectionOfA,
    new IPredicate<MyTypeA>() {
        public boolean apply(MyTypeA objectOfA) {
            Predicate.predicateParams = objectOfA.getName();
            return Predicate.select(myCollectionB, new IPredicate<MyTypeB>() {
                public boolean apply(MyTypeB objectOfB) {
                    return objectOfB.getName().equals(Predicate.predicateParams.toString());
                }
            }) == null;
        }
    });

The following example, looks for an instance in a collection, and returns the first element of the collection as default value when the instance is not found:

MyType myObject = Predicate.select(collectionOfMyType, new IPredicate<MyType>() {
public boolean apply(MyType objectOfMyType) {
    return objectOfMyType.isDefault();
}}, collectionOfMyType.get(0));

UPDATE (after Java 8 release):

It's been several years since I (Alan) first posted this answer, and I still cannot believe I am collecting SO points for this answer. At any rate, now that Java 8 has introduced closures to the language, my answer would now be considerably different, and simpler. With Java 8, there is no need for a distinct static utility class. So if you want to find the 1st element that matches your predicate.

final UserService userService = ... // perhaps injected IoC
final Optional<UserModel> userOption = userCollection.stream().filter(u -> {
    boolean isAuthorized = userService.isAuthorized(u);
    return isAuthorized;
}).findFirst();

The JDK 8 API for optionals has the ability to get(), isPresent(), orElse(defaultUser), orElseGet(userSupplier) and orElseThrow(exceptionSupplier), as well as other 'monadic' functions such as map, flatMap and filter.

If you want to simply collect all the users which match the predicate, then use the Collectors to terminate the stream in the desired collection.

final UserService userService = ... // perhaps injected IoC
final List<UserModel> userOption = userCollection.stream().filter(u -> {
    boolean isAuthorized = userService.isAuthorized(u);
    return isAuthorized;
}).collect(Collectors.toList());

See here for more examples on how Java 8 streams work.

final

final can be used to mark a variable "unchangeable"

private final String name = "foo";  //the reference name can never change

final can also make a method not "overrideable"

public final String toString() {  return "NULL"; }

final can also make a class not "inheritable". i.e. the class can not be subclassed.

public final class finalClass {...}
public class classNotAllowed extends finalClass {...} // Not allowed

finally

finally is used in a try/catch statement to execute code "always"

lock.lock();
try {
  //do stuff
} catch (SomeException se) {
  //handle se
} finally {
  lock.unlock(); //always executed, even if Exception or Error or se
}

Java 7 has a new try with resources statement that you can use to automatically close resources that explicitly or implicitly implement java.io.Closeable or java.lang.AutoCloseable

finalize

finalize is called when an object is garbage collected. You rarely need to override it. An example:

protected void finalize() {
  //free resources (e.g. unallocate memory)
  super.finalize();
}

i saw people doing:

while (el.firstNode) {
    el.removeChild(el.firstNode);
}

then someone said using el.lastNode is faster

however I would think that this is the fastest:

var children = el.childNodes;
for (var i=children.length - 1; i>-1; i--) {
    el.removeNode(children[i]);
}

what do you think?

ps: this topic was a life saver for me. my firefox addon got rejected cuz i used innerHTML. Its been a habit for a long time. then i foudn this. and i actually noticed a speed difference. on load the innerhtml took awhile to update, however going by addElement its instant!

Get the current Windows username:

using System;

class Sample
{
    public static void Main()
    {
        Console.WriteLine();

        //  <-- Keep this information secure! -->
        Console.WriteLine("UserName: {0}", Environment.UserName);
    }
}

Setting the background color on UITableViewHeaderFooterView has been deprecated. Please use contentView.backgroundColor instead.

I was also getting the same error, the WCF was working properly for me when i was using it in the Dev Environment with my credentials, but when someone else was using it in TEST, it was throwing the same error. I did a lot of research, and then instead of doing config updates, handled an exception in the WCF method with the help of fault exception. Also the identity for the WCF needs to be set with the same credentials which are having access in the database, someone might have changed your authority. Please find below the code for the same:

 [ServiceContract]
public interface IService1
{
    [OperationContract]
    [FaultContract(typeof(ServiceData))]
    ForDataset GetCCDBdata();

    [OperationContract]
    [FaultContract(typeof(ServiceData))]
    string GetCCDBdataasXMLstring();


    //[OperationContract]
    //string GetData(int value);

    //[OperationContract]
    //CompositeType GetDataUsingDataContract(CompositeType composite);

    // TODO: Add your service operations here
}

  [DataContract]
public class ServiceData
{
    [DataMember]
    public bool Result { get; set; }
    [DataMember]
    public string ErrorMessage { get; set; }
    [DataMember]
    public string ErrorDetails { get; set; }
}

in your service1.svc.cs you can use this in the catch block:

 catch (Exception ex)
        {
            myServiceData.Result = false;
            myServiceData.ErrorMessage = "unforeseen error occured. Please try later.";
            myServiceData.ErrorDetails = ex.ToString();
            throw new FaultException<ServiceData>(myServiceData, ex.ToString());
        }

And use this in the Client application like below code:

  ConsoleApplicationWCFClient.CCDB_HIG_service.ForDataset ds = obj.GetCCDBdata();

            string str = obj.GetCCDBdataasXMLstring();

        }

        catch (FaultException<ConsoleApplicationWCFClient.CCDB_HIG_service.ServiceData> Fex)
      {
          Console.WriteLine("ErrorMessage::" + Fex.Detail.ErrorMessage + Environment.NewLine);
          Console.WriteLine("ErrorDetails::" + Environment.NewLine + Fex.Detail.ErrorDetails);
          Console.ReadLine();
      }

Just try this, it will help for sure to get the exact issue.

We also need to mention default schema for SQSERVER: dbo

<property name="hibernate.default_schema">dbo</property>

Tested with hibernate 4

This exception says that you are trying to deserialize the object "Address" from string "\"\"" instead of an object description like "{…}". The deserializer can't find a constructor of Address with String argument. You have to replace "" by {} to avoid this error.

"var" means the compiler will determine the explicit type of the variable, based on usage. For example,

var myVar = new Connection();

would give you a variable of type Connection.

Yes: call the toPandas method on your dataframe and you'll get an actual pandas dataframe !

Andreas Lundgren's answer worked and I was able to compile and run my app.

However, when I tried to run the project's associated JUnit tests I received the same error. Running

gradle -version

from Windows command prompt showed that gradle was still picking up the incorrect jdk. To fix it I had to set the JAVA_HOME environment variable to point to the correct jdk and restart IntelliJ.

For an updated answer you can build a forEach function in Python easily:

def forEach(list, function):
    for i, v in enumerate(list):
        function(v, i, list)

You could also adapt this to map, reduce, filter, and any other array functions from other languages or precedence you'd want to bring over. For loops are fast enough, but the boiler plate is longer than forEach or the other functions. You could also extend list to have these functions with a local pointer to a class so you could call them directly on lists as well.

Ignoring the smooth interpolation between points in your example graph (that would require doing some manual interpolation, or just have a higher resolution of your data), you can use pyplot.fill_between():

from matplotlib import pyplot as plt
import numpy as np

x = np.linspace(0, 30, 30)
y = np.sin(x/6*np.pi)
error = np.random.normal(0.1, 0.02, size=y.shape)
y += np.random.normal(0, 0.1, size=y.shape)

plt.plot(x, y, 'k-')
plt.fill_between(x, y-error, y+error)
plt.show()

See also the matplotlib examples.

With my pymongo version: 3.2.2 I had do the following

from bson.objectid import ObjectId
import pymongo

client = pymongo.MongoClient("localhost", 27017)
db = client.mydbname

db.ProductData.update_one({
  '_id': ObjectId(p['_id']['$oid'])
},{
  '$set': {
    'd.a': existing + 1
  }
}, upsert=False)

   double myAtof ( string &num){
      double tmp;
      sscanf ( num.c_str(), "%lf" , &tmp);
      return tmp;
   }

The answers did help, but I think a full implementation of this will help a lot of people.

using System;
using System.Collections.Generic;
using System.IO;
using System.Net;
using System.Text;

namespace Dom
{
    class Dom
    {
        public static string make_Sting_From_Dom(string reportname)
        {
            try
            {
                WebClient client = new WebClient();
                client.Credentials = CredentialCache.DefaultCredentials;
                // Retrieve resource as a stream               
                Stream data = client.OpenRead(new Uri(reportname.Trim()));
                // Retrieve the text
                StreamReader reader = new StreamReader(data);
                string htmlContent = reader.ReadToEnd();
                string mtch = "TILDE";
                bool b = htmlContent.Contains(mtch);

                if (b)
                {
                    int index = htmlContent.IndexOf(mtch);
                    if (index >= 0)
                        Console.WriteLine("'{0} begins at character position {1}",
                        mtch, index + 1);
                }
                // Cleanup
                data.Close();
                reader.Close();
                return htmlContent;
            }
            catch (Exception)
            {
                throw;
            }
        }

        static void Main(string[] args)
        {
            make_Sting_From_Dom("https://www.w3.org/TR/PNG/iso_8859-1.txt");
        }
    }
}

well since this is the first google hit for this problem:

function mb_tell(&$msg) {
    if(count($msg) == 0) {
        return 0;
    }
    //prev($msg);
    $kv = each($msg);
    if(!prev($msg)) {
        end($msg);

        print_r($kv);
        return ($kv[0]+1);
    }
    print_r($kv);
    return ($kv[0]);
}

In addition to testing using the "is" operator, you can decorate your methods to make sure that variables passed to it implement a particular interface, like so:

public static void BubbleSort<T>(ref IList<T> unsorted_list) where T : IComparable
{
     //Some bubbly sorting
}

I'm not sure which version of .Net this was implemented in so it may not work in your version.

Mustache pros:

• Very popular choice with a large, active community.
• Server side support in many languages, including Java.
• Logic-less templates do a great job of forcing you to separate presentation from logic.
• Clean syntax leads to templates that are easy to build, read, and maintain.

Mustache cons:

• A little too logic-less: basic tasks (e.g. label alternate rows with different CSS classes) are difficult.
• View logic is often pushed back to the server or implemented as a "lambda" (callable function).
• For lambdas to work on client and server, you must write them in JavaScript.

Handlebars pros:

• Logic-less templates do a great job of forcing you to separate presentation from logic.
• Clean syntax leads to templates that are easy to build, read, and maintain.
• Compiled rather than interpreted templates.
• Better support for paths than mustache (ie, reaching deep into a context object).
• Better support for global helpers than mustache.

Handlebars cons:

• Requires server-side JavaScript to render on the server.

Source: The client-side templating throwdown: mustache, handlebars, dust.js, and more

React Native documentation suggests using Linking:

Reference

Here is a very basic use case:

import { Linking } from 'react-native';

const url="https://google.com"

<Text onPress={() => Linking.openURL(url)}>
    {url}
</Text>

You can use either functional or class component notation, dealers choice.

With Swift 5 and iOS 12.3, you can use one the 4 following implementations in order to set the number of items per row in your UICollectionView while managing insets and size changes (including rotation).

#1. Subclassing UICollectionViewFlowLayout and using UICollectionViewFlowLayout's itemSize property

ColumnFlowLayout.swift:

import UIKit

class ColumnFlowLayout: UICollectionViewFlowLayout {

    let cellsPerRow: Int

    init(cellsPerRow: Int, minimumInteritemSpacing: CGFloat = 0, minimumLineSpacing: CGFloat = 0, sectionInset: UIEdgeInsets = .zero) {
        self.cellsPerRow = cellsPerRow
        super.init()

        self.minimumInteritemSpacing = minimumInteritemSpacing
        self.minimumLineSpacing = minimumLineSpacing
        self.sectionInset = sectionInset
    }

    required init?(coder aDecoder: NSCoder) {
        fatalError("init(coder:) has not been implemented")
    }

    override func prepare() {
        super.prepare()

        guard let collectionView = collectionView else { return }
        let marginsAndInsets = sectionInset.left + sectionInset.right + collectionView.safeAreaInsets.left + collectionView.safeAreaInsets.right + minimumInteritemSpacing * CGFloat(cellsPerRow - 1)
        let itemWidth = ((collectionView.bounds.size.width - marginsAndInsets) / CGFloat(cellsPerRow)).rounded(.down)
        itemSize = CGSize(width: itemWidth, height: itemWidth)
    }

    override func invalidationContext(forBoundsChange newBounds: CGRect) -> UICollectionViewLayoutInvalidationContext {
        let context = super.invalidationContext(forBoundsChange: newBounds) as! UICollectionViewFlowLayoutInvalidationContext
        context.invalidateFlowLayoutDelegateMetrics = newBounds.size != collectionView?.bounds.size
        return context
    }

}

CollectionViewController.swift:

import UIKit

class CollectionViewController: UICollectionViewController {

    let columnLayout = ColumnFlowLayout(
        cellsPerRow: 5,
        minimumInteritemSpacing: 10,
        minimumLineSpacing: 10,
        sectionInset: UIEdgeInsets(top: 10, left: 10, bottom: 10, right: 10)
    )

    override func viewDidLoad() {
        super.viewDidLoad()

        collectionView?.collectionViewLayout = columnLayout
        collectionView?.contentInsetAdjustmentBehavior = .always
        collectionView?.register(UICollectionViewCell.self, forCellWithReuseIdentifier: "Cell")
    }

    override func collectionView(_ collectionView: UICollectionView, numberOfItemsInSection section: Int) -> Int {
        return 59
    }

    override func collectionView(_ collectionView: UICollectionView, cellForItemAt indexPath: IndexPath) -> UICollectionViewCell {
        let cell = collectionView.dequeueReusableCell(withReuseIdentifier: "Cell", for: indexPath)
        cell.backgroundColor = UIColor.orange
        return cell
    }

}

#2. Using UICollectionViewFlowLayout's itemSize method

import UIKit

class CollectionViewController: UICollectionViewController {

    let margin: CGFloat = 10
    let cellsPerRow = 5

    override func viewDidLoad() {
        super.viewDidLoad()

        guard let collectionView = collectionView, let flowLayout = collectionViewLayout as? UICollectionViewFlowLayout else { return }

        flowLayout.minimumInteritemSpacing = margin
        flowLayout.minimumLineSpacing = margin
        flowLayout.sectionInset = UIEdgeInsets(top: margin, left: margin, bottom: margin, right: margin)

        collectionView.contentInsetAdjustmentBehavior = .always
        collectionView.register(UICollectionViewCell.self, forCellWithReuseIdentifier: "Cell")
    }

    override func viewWillLayoutSubviews() {
        guard let collectionView = collectionView, let flowLayout = collectionView.collectionViewLayout as? UICollectionViewFlowLayout else { return }
        let marginsAndInsets = flowLayout.sectionInset.left + flowLayout.sectionInset.right + collectionView.safeAreaInsets.left + collectionView.safeAreaInsets.right + flowLayout.minimumInteritemSpacing * CGFloat(cellsPerRow - 1)
        let itemWidth = ((collectionView.bounds.size.width - marginsAndInsets) / CGFloat(cellsPerRow)).rounded(.down)
        flowLayout.itemSize =  CGSize(width: itemWidth, height: itemWidth)
    }

    override func collectionView(_ collectionView: UICollectionView, numberOfItemsInSection section: Int) -> Int {
        return 59
    }

    override func collectionView(_ collectionView: UICollectionView, cellForItemAt indexPath: IndexPath) -> UICollectionViewCell {
        let cell = collectionView.dequeueReusableCell(withReuseIdentifier: "Cell", for: indexPath)
        cell.backgroundColor = UIColor.orange
        return cell
    }

    override func viewWillTransition(to size: CGSize, with coordinator: UIViewControllerTransitionCoordinator) {
        collectionView?.collectionViewLayout.invalidateLayout()
        super.viewWillTransition(to: size, with: coordinator)
    }

}

#3. Using UICollectionViewDelegateFlowLayout's collectionView(_:layout:sizeForItemAt:) method

import UIKit

class CollectionViewController: UICollectionViewController, UICollectionViewDelegateFlowLayout {

    let inset: CGFloat = 10
    let minimumLineSpacing: CGFloat = 10
    let minimumInteritemSpacing: CGFloat = 10
    let cellsPerRow = 5

    override func viewDidLoad() {
        super.viewDidLoad()

        collectionView?.contentInsetAdjustmentBehavior = .always
        collectionView?.register(UICollectionViewCell.self, forCellWithReuseIdentifier: "Cell")
    }

    func collectionView(_ collectionView: UICollectionView, layout collectionViewLayout: UICollectionViewLayout, insetForSectionAt section: Int) -> UIEdgeInsets {
        return UIEdgeInsets(top: inset, left: inset, bottom: inset, right: inset)
    }

    func collectionView(_ collectionView: UICollectionView, layout collectionViewLayout: UICollectionViewLayout, minimumLineSpacingForSectionAt section: Int) -> CGFloat {
        return minimumLineSpacing
    }

    func collectionView(_ collectionView: UICollectionView, layout collectionViewLayout: UICollectionViewLayout, minimumInteritemSpacingForSectionAt section: Int) -> CGFloat {
        return minimumInteritemSpacing
    }

    func collectionView(_ collectionView: UICollectionView, layout collectionViewLayout: UICollectionViewLayout, sizeForItemAt indexPath: IndexPath) -> CGSize {
        let marginsAndInsets = inset * 2 + collectionView.safeAreaInsets.left + collectionView.safeAreaInsets.right + minimumInteritemSpacing * CGFloat(cellsPerRow - 1)
        let itemWidth = ((collectionView.bounds.size.width - marginsAndInsets) / CGFloat(cellsPerRow)).rounded(.down)
        return CGSize(width: itemWidth, height: itemWidth)
    }

    override func collectionView(_ collectionView: UICollectionView, numberOfItemsInSection section: Int) -> Int {
        return 59
    }

    override func collectionView(_ collectionView: UICollectionView, cellForItemAt indexPath: IndexPath) -> UICollectionViewCell {
        let cell = collectionView.dequeueReusableCell(withReuseIdentifier: "Cell", for: indexPath)
        cell.backgroundColor = UIColor.orange
        return cell
    }

    override func viewWillTransition(to size: CGSize, with coordinator: UIViewControllerTransitionCoordinator) {
        collectionView?.collectionViewLayout.invalidateLayout()
        super.viewWillTransition(to: size, with: coordinator)
    }

}

#4. Subclassing UICollectionViewFlowLayout and using UICollectionViewFlowLayout's estimatedItemSize property

CollectionViewController.swift:

import UIKit

class CollectionViewController: UICollectionViewController {

    let items = [
        "Lorem ipsum dolor sit amet, consectetur adipiscing elit.",
        "Lorem ipsum dolor sit amet, consectetur.",
        "Lorem ipsum dolor sit amet.",
        "Lorem ipsum dolor sit amet, consectetur.",
        "Lorem ipsum dolor sit amet, consectetur adipiscing.",
        "Lorem ipsum.",
        "Lorem ipsum dolor sit amet.",
        "Lorem ipsum dolor sit.",
        "Lorem ipsum dolor sit amet, consectetur adipiscing.",
        "Lorem ipsum dolor sit amet, consectetur adipiscing elit.",
        "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor.",
        "Lorem ipsum dolor sit amet, consectetur."
    ]

    let columnLayout = FlowLayout(
        cellsPerRow: 3,
        minimumInteritemSpacing: 10,
        minimumLineSpacing: 10,
        sectionInset: UIEdgeInsets(top: 10, left: 10, bottom: 10, right: 10)
    )

    override func viewDidLoad() {
        super.viewDidLoad()

        collectionView?.collectionViewLayout = columnLayout
        collectionView?.contentInsetAdjustmentBehavior = .always
        collectionView?.register(Cell.self, forCellWithReuseIdentifier: "Cell")
    }

    override func collectionView(_ collectionView: UICollectionView, numberOfItemsInSection section: Int) -> Int {
        return items.count
    }

    override func collectionView(_ collectionView: UICollectionView, cellForItemAt indexPath: IndexPath) -> UICollectionViewCell {
        let cell = collectionView.dequeueReusableCell(withReuseIdentifier: "Cell", for: indexPath) as! Cell
        cell.label.text = items[indexPath.row]
        return cell
    }

    override func viewWillTransition(to size: CGSize, with coordinator: UIViewControllerTransitionCoordinator) {
        collectionView?.collectionViewLayout.invalidateLayout()
        super.viewWillTransition(to: size, with: coordinator)
    }

}

FlowLayout.swift:

import UIKit

class FlowLayout: UICollectionViewFlowLayout {

    let cellsPerRow: Int

    required init(cellsPerRow: Int = 1, minimumInteritemSpacing: CGFloat = 0, minimumLineSpacing: CGFloat = 0, sectionInset: UIEdgeInsets = .zero) {
        self.cellsPerRow = cellsPerRow

        super.init()

        self.minimumInteritemSpacing = minimumInteritemSpacing
        self.minimumLineSpacing = minimumLineSpacing
        self.sectionInset = sectionInset
        estimatedItemSize = UICollectionViewFlowLayout.automaticSize
    }

    required init?(coder aDecoder: NSCoder) {
        fatalError("init(coder:) has not been implemented")
    }

    override func layoutAttributesForItem(at indexPath: IndexPath) -> UICollectionViewLayoutAttributes? {
        guard let layoutAttributes = super.layoutAttributesForItem(at: indexPath) else { return nil }
        guard let collectionView = collectionView else { return layoutAttributes }

        let marginsAndInsets = collectionView.safeAreaInsets.left + collectionView.safeAreaInsets.right + sectionInset.left + sectionInset.right + minimumInteritemSpacing * CGFloat(cellsPerRow - 1)
        layoutAttributes.bounds.size.width = ((collectionView.bounds.width - marginsAndInsets) / CGFloat(cellsPerRow)).rounded(.down)

        return layoutAttributes
    }

    override func layoutAttributesForElements(in rect: CGRect) -> [UICollectionViewLayoutAttributes]? {
        let superLayoutAttributes = super.layoutAttributesForElements(in: rect)!.map { $0.copy() as! UICollectionViewLayoutAttributes }
        guard scrollDirection == .vertical else { return superLayoutAttributes }

        let layoutAttributes = superLayoutAttributes.compactMap { layoutAttribute in
            return layoutAttribute.representedElementCategory == .cell ? layoutAttributesForItem(at: layoutAttribute.indexPath) : layoutAttribute
        }

        // (optional) Uncomment to top align cells that are on the same line
        /*
        let cellAttributes = layoutAttributes.filter({ $0.representedElementCategory == .cell })
        for (_, attributes) in Dictionary(grouping: cellAttributes, by: { ($0.center.y / 10).rounded(.up) * 10 }) {
            guard let max = attributes.max(by: { $0.size.height < $1.size.height }) else { continue }
            for attribute in attributes where attribute.size.height != max.size.height {
                attribute.frame.origin.y = max.frame.origin.y
            }
        }
         */

        // (optional) Uncomment to bottom align cells that are on the same line
        /*
        let cellAttributes = layoutAttributes.filter({ $0.representedElementCategory == .cell })
        for (_, attributes) in Dictionary(grouping: cellAttributes, by: { ($0.center.y / 10).rounded(.up) * 10 }) {
            guard let max = attributes.max(by: { $0.size.height < $1.size.height }) else { continue }
            for attribute in attributes where attribute.size.height != max.size.height {
                attribute.frame.origin.y += max.frame.maxY - attribute.frame.maxY
            }
        }
         */

        return layoutAttributes
    }

}

Cell.swift:

import UIKit

class Cell: UICollectionViewCell {

    let label = UILabel()

    override init(frame: CGRect) {
        super.init(frame: frame)

        label.numberOfLines = 0
        backgroundColor = .orange
        contentView.addSubview(label)

        label.translatesAutoresizingMaskIntoConstraints = false
        label.topAnchor.constraint(equalTo: contentView.layoutMarginsGuide.topAnchor).isActive = true
        label.leadingAnchor.constraint(equalTo: contentView.layoutMarginsGuide.leadingAnchor).isActive = true
        label.trailingAnchor.constraint(equalTo: contentView.layoutMarginsGuide.trailingAnchor).isActive = true
        label.bottomAnchor.constraint(equalTo: contentView.layoutMarginsGuide.bottomAnchor).isActive = true
    }

    required init?(coder aDecoder: NSCoder) {
        fatalError("init(coder:) has not been implemented")
    }

    override func preferredLayoutAttributesFitting(_ layoutAttributes: UICollectionViewLayoutAttributes) -> UICollectionViewLayoutAttributes {
        layoutIfNeeded()
        label.preferredMaxLayoutWidth = label.bounds.size.width
        layoutAttributes.bounds.size.height = contentView.systemLayoutSizeFitting(UIView.layoutFittingCompressedSize).height
        return layoutAttributes
    }

    // Alternative implementation
    /*
    override func preferredLayoutAttributesFitting(_ layoutAttributes: UICollectionViewLayoutAttributes) -> UICollectionViewLayoutAttributes {
        label.preferredMaxLayoutWidth = layoutAttributes.size.width - contentView.layoutMargins.left - contentView.layoutMargins.right
        layoutAttributes.bounds.size.height = contentView.systemLayoutSizeFitting(UIView.layoutFittingCompressedSize).height
        return layoutAttributes
    }
    */

}

I like the aliases too ... however, I've had issues with MySQLCOM for start ... it fails silently ... My workaround is akin to the others ... ~/.bash_aliases

alias mysqlstart='sudo /usr/local/mysql/support-files/mysql.server start'
alias mysqlstop='sudo /usr/local/mysql/support-files/mysql.server stop' 

If you would like to support all versions: Try this:

myTextView.setBackgroundColor(ContextCompat.getColor(this,R.color.mycolor)); 

MySQL: In general, make necessary changes par your requirement:

UPDATE
    shopping_cart sc
    LEFT JOIN
    package pc ON sc. package_id = pc.id    
SET
    sc. amount = pc.amount

If you are using java 8 the use of the internal Base64 encoder and decoder can be avoided by replacing

return new BASE64Encoder().encode(bytes);

with

return Base64.getEncoder().encodeToString(bytes);

and

return new BASE64Decoder().decodeBuffer(property);

with

return Base64.getDecoder().decode(property);

Note that this solution doesn't protect your data as the methods for decrypting are stored in the same place. It just makes it more difficult to break. Mainly it avoids to print it and show it to everybody by mistake.

The table normally contains multiple rows. Use a loop and use row.Field<string>(0) to access the value of each row.

foreach(DataRow row in dt.Rows)
{
    string file = row.Field<string>("File");
}

You can also access it via index:

foreach(DataRow row in dt.Rows)
{
    string file = row.Field<string>(0);
}

If you expect only one row, you can also use the indexer of DataRowCollection:

string file = dt.Rows[0].Field<string>(0); 

Since this fails if the table is empty, use dt.Rows.Count to check if there is a row:

if(dt.Rows.Count > 0)
    file = dt.Rows[0].Field<string>(0);

It's pretty simple. Pay attention and you'll get it right away! :)

You will create a html array, which will be then sent to php array. Your html code will look like this:

<input type="checkbox" name="check_list[1]" alt="Checkbox" value="checked">
<input type="checkbox" name="check_list[2]" alt="Checkbox" value="checked">
<input type="checkbox" name="check_list[3]" alt="Checkbox" value="checked">

Where [1] [2] [3] are the IDs of your messages, meaning that you will echo your $row['Report ID'] in their place.

Then, when you submit the form, your PHP array will look like this:

print_r($check_list)

[1] => checked [3] => checked

Depending on which were checked and which were not.

I'm sure you can continue from this point forward.

Here is the example in which you can easily find the way to use Post,GET method and use the same way to add other curd operations as well..

#libraries to include

import os
from flask import request, jsonify
from app import app, mongo
import logger
ROOT_PATH = os.environ.get('ROOT_PATH')<br>
@app.route('/get/questions/', methods=['GET', 'POST','DELETE', 'PATCH'])
    def question():
    # request.args is to get urls arguments 


    if request.method == 'GET':
        start = request.args.get('start', default=0, type=int)
        limit_url = request.args.get('limit', default=20, type=int)
        questions = mongo.db.questions.find().limit(limit_url).skip(start);
        data = [doc for doc in questions]
        return jsonify(isError= False,
                    message= "Success",
                    statusCode= 200,
                    data= data), 200

# request.form to get form parameter

    if request.method == 'POST':
        average_time = request.form.get('average_time')
        choices = request.form.get('choices')
        created_by = request.form.get('created_by')
        difficulty_level = request.form.get('difficulty_level')
        question = request.form.get('question')
        topics = request.form.get('topics')

    ##Do something like insert in DB or Render somewhere etc. it's up to you....... :)

For me when I created a file and saved it as python file, I was getting this error during importing. I had to create a filename with the type ".py" , like filename.py and then save it as a python file. post trying to import the file worked for me.

I have created some simple function you can use to convert time to any timezone :

function convertTimeToLocal($datetime,$timezone='Europe/Dublin') {
        $given = new DateTime($datetime, new DateTimeZone("UTC"));
        $given->setTimezone(new DateTimeZone($timezone));
        $output = $given->format("Y-m-d"); //can change as per your requirement
        return $output;
}

document.querySelectorAll() has several inconsistencies across browsers and is not supported in older browsers^{This probably won't cause any trouble anymore nowadays}. It has a very unintuitive scoping mechanism and some other not so nice features. Also with javascript you have a harder time working with the result sets of these queries, which in many cases you might want to do. jQuery provides functions to work on them like: filter(), find(), children(), parent(), map(), not() and several more. Not to mention the jQuery ability to work with pseudo-class selectors.

However, I would not consider these things as jQuery's strongest features but other things like "working" on the dom (events, styling, animation & manipulation) in a crossbrowser compatible way or the ajax interface.

If you only want the selector engine from jQuery you can use the one jQuery itself is using: Sizzle That way you have the power of jQuerys Selector engine without the nasty overhead.

EDIT: Just for the record, I'm a huge vanilla JavaScript fan. Nonetheless it's a fact that you sometimes need 10 lines of JavaScript where you would write 1 line jQuery.

Of course you have to be disciplined to not write jQuery like this:

$('ul.first').find('.foo').css('background-color', 'red').end().find('.bar').css('background-color', 'green').end();

This is extremely hard to read, while the latter is pretty clear:

$('ul.first')
   .find('.foo')
      .css('background-color', 'red')
.end()
   .find('.bar')
      .css('background-color', 'green')
.end();

The equivalent JavaScript would be far more complex illustrated by the pseudocode above:

1) Find the element, consider taking all element or only the first.

// $('ul.first')
// taking querySelectorAll has to be considered
var e = document.querySelector("ul.first");

2) Iterate over the array of child nodes via some (possibly nested or recursive) loops and check the class (classlist not available in all browsers!)

//.find('.foo')
for (var i = 0;i<e.length;i++){
     // older browser don't have element.classList -> even more complex
     e[i].children.classList.contains('foo');
     // do some more magic stuff here
}

3) apply the css style

// .css('background-color', 'green')
// note different notation
element.style.backgroundColor = "green" // or
element.style["background-color"] = "green"

This code would be at least two times as much lines of code you write with jQuery. Also you would have to consider cross-browser issues which will compromise the severe speed advantage (besides from the reliability) of the native code.

Disclaimer, I work at Aptana. I would point out there are some nice features for JS that you might not get so easily elsewhere. One is plugin-level integration of JS libraries that provide CodeAssist, samples, snippets and easy inclusion of the libraries files into your project; we provide the plugins for many of the more commonly used libraries, including YUI, jQuery, Prototype, dojo and EXT JS.

Second, we have a server-side JavaScript engine called Jaxer that not only lets you run any of your JS code on the server but adds file, database and networking functionality so that you don't have to use a scripting language but can write the entire app in JS.

You can find classes with any given annotation with ClassGraph, as well as searching for other criteria of interest, e.g. classes that implement a given interface. (Disclaimer, I am the author of ClassGraph.) ClassGraph can build an abstract representation of the entire class graph (all classes, annotations, methods, method parameters, and fields) in memory, for all classes on the classpath, or for classes in whitelisted packages, and you can query that class graph however you want. ClassGraph supports more classpath specification mechanisms and classloaders than any other scanner, and also works seamlessly with the new JPMS module system, so if you base your code on ClassGraph, your code will be maximally portable. See the API here.

Smoke tests are tests which aim is to check if everything was build correctly. I mean here integration, connections. So you check from technically point of view if you can make wider tests. You have to execute some test cases and check if the results are positive.

Sanity tests in general have the same aim - check if we can make further test. But in sanity test you focus on business value so you execute some test cases but you check the logic.

In general people say smoke tests for both above because they are executed in the same time (sanity after smoke tests) and their aim is similar.

print s % tuple(x)

instead of

print s % (x)

You've just published that private key, so now the whole world knows what it is. Hopefully that was just for testing.

EDIT: Others have noted that the openssl text header of the published key, -----BEGIN RSA PRIVATE KEY-----, indicates that it is PKCS#1. However, the actual Base64 contents of the key in question is PKCS#8. Evidently the OP copy and pasted the header and trailer of a PKCS#1 key onto the PKCS#8 key for some unknown reason. The sample code I've provided below works with PKCS#8 private keys.

Here is some code that will create the private key from that data. You'll have to replace the Base64 decoding with your IBM Base64 decoder.

public class RSAToy {

    private static final String BEGIN_RSA_PRIVATE_KEY = "-----BEGIN RSA PRIVATE KEY-----\n"
            + "MIIEuwIBADAN ...skipped the rest\n"
         // + ...   
         // + ... skipped the rest
         // + ...   
            + "-----END RSA PRIVATE KEY-----";

    public static void main(String[] args) throws Exception {

        // Remove the first and last lines

        String privKeyPEM = BEGIN_RSA_PRIVATE_KEY.replace("-----BEGIN RSA PRIVATE KEY-----\n", "");
        privKeyPEM = privKeyPEM.replace("-----END RSA PRIVATE KEY-----", "");
        System.out.println(privKeyPEM);

        // Base64 decode the data

        byte [] encoded = Base64.decode(privKeyPEM);

        // PKCS8 decode the encoded RSA private key

        PKCS8EncodedKeySpec keySpec = new PKCS8EncodedKeySpec(encoded);
        KeyFactory kf = KeyFactory.getInstance("RSA");
        PrivateKey privKey = kf.generatePrivate(keySpec);

        // Display the results

        System.out.println(privKey);
    }
}

You can pass environment variables to your containers with the -e flag.

An example from a startup script:

sudo docker run -d -t -i -e REDIS_NAMESPACE='staging' \ 
-e POSTGRES_ENV_POSTGRES_PASSWORD='foo' \
-e POSTGRES_ENV_POSTGRES_USER='bar' \
-e POSTGRES_ENV_DB_NAME='mysite_staging' \
-e POSTGRES_PORT_5432_TCP_ADDR='docker-db-1.hidden.us-east-1.rds.amazonaws.com' \
-e SITE_URL='staging.mysite.com' \
-p 80:80 \
--link redis:redis \  
--name container_name dockerhub_id/image_name

Or, if you don't want to have the value on the command-line where it will be displayed by ps, etc., -e can pull in the value from the current environment if you just give it without the =:

sudo PASSWORD='foo' docker run  [...] -e PASSWORD [...]

If you have many environment variables and especially if they're meant to be secret, you can use an env-file:

$ docker run --env-file ./env.list ubuntu bash

The --env-file flag takes a filename as an argument and expects each line to be in the VAR=VAL format, mimicking the argument passed to --env. Comment lines need only be prefixed with #

Here is how I did this, somewhat similar to the solutions above. Just make sure you call the loadDots() method after all images are downloaded.

    private int dotsCount;
    private TextView dotsTextView[];

    private void setupAdapter() {
        adapter = new SomeAdapter(getContext(), images);
        viewPager.setAdapter(adapter);
        viewPager.setCurrentItem(0);
        viewPager.addOnPageChangeListener(viewPagerPageChangeListener);
    }

    private final ViewPager.OnPageChangeListener viewPagerPageChangeListener = new ViewPager.OnPageChangeListener() {
        @Override
        public void onPageScrolled(int position, float positionOffset, int positionOffsetPixels) {}

        @Override
        public void onPageSelected(int position) {
            for (int i = 0; i < dotsCount; i++)
                dotsTextView[i].setTextColor(Color.GRAY);

            dotsTextView[position].setTextColor(Color.WHITE);
        }

        @Override
        public void onPageScrollStateChanged(int state) {}
    };

    protected void loadDots() {
        dotsCount = adapter.getCount();
        dotsTextView = new TextView[dotsCount];
        for (int i = 0; i < dotsCount; i++) {
            dotsTextView[i] = new TextView(getContext());
            dotsTextView[i].setText(R.string.dot);
            dotsTextView[i].setTextSize(45);
            dotsTextView[i].setTypeface(null, Typeface.BOLD);
            dotsTextView[i].setTextColor(android.graphics.Color.GRAY);
            mDotsLayout.addView(dotsTextView[i]);
        }
        dotsTextView[0].setTextColor(Color.WHITE);
    }

XML

<?xml version="1.0" encoding="utf-8"?>

<FrameLayout
    xmlns:android="http://schemas.android.com/apk/res/android"
    android:layout_width="match_parent"
    android:layout_height="wrap_content">

    <android.support.v4.view.ViewPager
        android:id="@+id/viewPager"
        android:layout_width="match_parent"
        android:layout_height="180dp"
        android:background="#00000000"/>


    <ImageView
        xmlns:android="http://schemas.android.com/apk/res/android"
        android:id="@+id/introImageView"
        android:layout_width="match_parent"
        android:layout_height="match_parent"/>

    <LinearLayout
        android:id="@+id/image_count"
        android:layout_width="match_parent"
        android:layout_height="match_parent"
        android:background="#00000000"
        android:gravity="center|bottom"
        android:orientation="horizontal"/>
</FrameLayout>

I'm disable on value:

<option disabled="disabled">value</option>

Use font-awesome stacked icons (alternative to bootstrap badges). Here are more examples: http://fontawesome.io/examples/

 .no-border {_x000D_
        border: none;_x000D_
        background-color: white;_x000D_
        outline: none;_x000D_
        cursor: pointer;_x000D_
    }_x000D_
.color-no-focus {_x000D_
        color: grey;_x000D_
    }_x000D_
  .hover:hover {_x000D_
        color: blue;_x000D_
    }_x000D_
 .white {_x000D_
        color: white;_x000D_
    }

<button type="button" (click)="doSomething()" _x000D_
class="hover color-no-focus no-border fa-stack fa-lg">_x000D_
<i class="color-focus fa fa-circle fa-stack-2x"></i>_x000D_
<span class="white fa-stack-1x">1</span>_x000D_
</button>_x000D_
<link href="https://maxcdn.bootstrapcdn.com/font-awesome/4.7.0/css/font-awesome.min.css" rel="stylesheet"/>

Run this command:-

rails g migration drop_table_name

then:

rake db:migrate

or if you are using MySql database then:

1. login with database
2. show databases;
3. show tables;
4. drop table_name;

It may be easier to use XPath to locate the nodes that you wish to delete. This stackoverflow thread might give you some ideas.

In your case you will find the four nodes that you want using this expression:

XmlDocument doc = new XmlDocument();
doc.Load(fileName);
XmlNodeList nodes = doc.SelectNodes("//Setting[@name='File1']");

This seems to be a common error. The solution is to:

• right-click project
• choose properties
• choose 'Java Compiler'
• unclick the first box saying 'Enable project specific settings'
• apply
• save
• run

Hope this helps in some cases.

Google Play services has two APIs you can use to streamline the SMS-based verification process

SMS Retriever API

Provides a fully automated user experience, without requiring the user to manually type verification codes and without requiring any extra app permissions and should be used when possible. It does, however, require you to place a custom hash code in the message body, so you must have control over server side as well.

• Message requirements - 11-digit hash code that uniquely identifies your app
• Sender requirements - None
• User interaction - None

Request SMS Verification in an Android App

Perform SMS Verification on a Server

SMS User Consent API

Does not require the custom hash code, however require the user to approve your app's request to access the message containing the verification code. In order to minimize the chances of surfacing the wrong message to the user, SMS User Consent will filter out messages from senders in the user's Contacts list.

• Message requirements - 4-10 digit alphanumeric code containing at least one number
• Sender requirements - Sender cannot be in the user's Contacts list
• User interaction - One tap to approve

The SMS User Consent API is part of Google Play Services. To use it you’ll need at least version 17.0.0 of these libraries:

implementation "com.google.android.gms:play-services-auth:17.0.0"
implementation "com.google.android.gms:play-services-auth-api-phone:17.1.0"

Step 1: Start listening for SMS messages

SMS User Consent will listen for incoming SMS messages that contain a one-time-code for up to five minutes. It won’t look at any messages that are sent before it’s started. If you know the phone number that will send the one-time-code, you can specify the senderPhoneNumber, or if you don’t null will match any number.

 smsRetriever.startSmsUserConsent(senderPhoneNumber /* or null */)

Step 2: Request consent to read a message

Once your app receives a message containing a one-time-code, it’ll be notified by a broadcast. At this point, you don’t have consent to read the message — instead you’re given an Intent that you can start to prompt the user for consent. Inside your BroadcastReceiver, you show the prompt using the Intent in the extras. When you start that intent, it will prompt the user for permission to read a single message. They’ll be shown the entire text that they will share with your app.

val consentIntent = extras.getParcelable<Intent>(SmsRetriever.EXTRA_CONSENT_INTENT)
startActivityForResult(consentIntent, SMS_CONSENT_REQUEST)

Step 3: Parse the one-time-code and complete SMS Verification

When the user clicks “Allow” — it’s time to actually read the message! Inside of onActivityResult you can get the full text of the SMS Message from the data:

val message = data.getStringExtra(SmsRetriever.EXTRA_SMS_MESSAGE)

You then parse the SMS message and pass the one-time-code to your backend!

In our case we were getting UnmarshalException because a wrong Java package was specified in the following. The issue was resolved once the right package was in place:

@Bean
public Unmarshaller tmsUnmarshaller() {
    final Jaxb2Marshaller jaxb2Marshaller = new Jaxb2Marshaller();
    jaxb2Marshaller
            .setPackagesToScan("java.package.to.generated.java.classes.for.xsd");
    return jaxb2Marshaller;
}

You can check out my project: JavaSysMon on GitHub. It provides process id and a bunch of other stuff (CPU usage, memory usage) cross-platform (presently Windows, Mac OSX, Linux and Solaris)

This might be late as I think most of us are using BS4. This article explained all the questions you asked in a detailed and simple manner also includes what to do when. The detailed guide to use bs4 or bootstrap

https://uxplanet.org/how-the-bootstrap-4-grid-works-a1b04703a3b7

Your SELECT statement isn't finding the data you're looking for. That is, there is no record in the ENROLLMENT table with the given STUDENT_ID and SECTION_ID. You may want to try putting some DBMS_OUTPUT.PUT_LINE statements before you run the query, printing the values of v_student_id and v_section_id. They may not be containing what you expect them to contain.

Do not use WP_Query() or get_posts(). From the WooCommerce doc:

wc_get_products and WC_Product_Query provide a standard way of retrieving products that is safe to use and will not break due to database changes in future WooCommerce versions. Building custom WP_Queries or database queries is likely to break your code in future versions of WooCommerce as data moves towards custom tables for better performance.

You can retrieve the products you want like this:

$args = array(
    'category' => array( 'hoodies' ),
    'orderby'  => 'name',
);
$products = wc_get_products( $args );

WooCommerce documentation

Note: the category argument takes an array of slugs, not IDs.

You probably have allProviders typed as object[] as well. And property country does not exist on object. If you don't care about typing, you can declare both allProviders and countryProviders as Array<any>:

let countryProviders: Array<any>;
let allProviders: Array<any>;

If you do want static type checking. You can create an interface for the structure and use it:

interface Provider {
    region: string,
    country: string,
    locale: string,
    company: string
}

let countryProviders: Array<Provider>;
let allProviders: Array<Provider>;

Roughly, partial does something like this (apart from keyword args support etc):

def partial(func, *part_args):
    def wrapper(*extra_args):
        args = list(part_args)
        args.extend(extra_args)
        return func(*args)

    return wrapper

So, by calling partial(sum2, 4) you create a new function (a callable, to be precise) that behaves like sum2, but has one positional argument less. That missing argument is always substituted by 4, so that partial(sum2, 4)(2) == sum2(4, 2)

As for why it's needed, there's a variety of cases. Just for one, suppose you have to pass a function somewhere where it's expected to have 2 arguments:

class EventNotifier(object):
    def __init__(self):
        self._listeners = []

    def add_listener(self, callback):
        ''' callback should accept two positional arguments, event and params '''
        self._listeners.append(callback)
        # ...

    def notify(self, event, *params):
        for f in self._listeners:
            f(event, params)

But a function you already have needs access to some third context object to do its job:

def log_event(context, event, params):
    context.log_event("Something happened %s, %s", event, params)

So, there are several solutions:

A custom object:

class Listener(object):
   def __init__(self, context):
       self._context = context

   def __call__(self, event, params):
       self._context.log_event("Something happened %s, %s", event, params)


 notifier.add_listener(Listener(context))

Lambda:

log_listener = lambda event, params: log_event(context, event, params)
notifier.add_listener(log_listener)

With partials:

context = get_context()  # whatever
notifier.add_listener(partial(log_event, context))

Of those three, partial is the shortest and the fastest. (For a more complex case you might want a custom object though).

Using a separate thread to display a simple please wait message is overkill especially if you don't have much experience with threading.

A much simpler approach is to create a "Please wait" form and display it as a mode-less window just before the slow loading form. Once the main form has finished loading, hide the please wait form.

In this way you are using just the one main UI thread to firstly display the please wait form and then load your main form.

The only limitation to this approach is that your please wait form cannot be animated (such as a animated GIF) because the thread is busy loading your main form.

PleaseWaitForm pleaseWait=new PleaseWaitForm ();

// Display form modelessly
pleaseWait.Show();

//  ALlow main UI thread to properly display please wait form.
Application.DoEvents();

// Show or load the main form.
mainForm.ShowDialog();

{
    "files.useExperimentalFileWatcher" : true
}

in Code -> Preferences -> Settings

Tested with Visual Studio Code Version 1.26.1 on mac and win

Here is good example of the CRUD operation using fetch API:

“A practical ES6 guide on how to perform HTTP requests using the Fetch API” by Dler Ari https://link.medium.com/4ZvwCordCW

Here is the sample code I tried for PATCH or PUT

function update(id, data){
  fetch(apiUrl + "/" + id, {
    method: 'PATCH',
    body: JSON.stringify({
     data
    })
  }).then((response) => {
    response.json().then((response) => {
      console.log(response);
    })
  }).catch(err => {
    console.error(err)
  })

For DELETE:

function remove(id){
  fetch(apiUrl + "/" + id, {
    method: 'DELETE'
  }).then(() => {
     console.log('removed');
  }).catch(err => {
    console.error(err)
  });

For more info visit Using Fetch - Web APIs | MDN https://developer.mozilla.org/en-US/docs/Web/API/Fetch_API/Using_Fetch > Fetch_API.

After importing stored procedure, you can create object of stored procedure pass the parameter like function

using (var entity = new FunctionsContext())
{
   var DBdata = entity.GetFunctionByID(5).ToList<Functions>();
}

or you can also use SqlQuery

using (var entity = new FunctionsContext())
{
    var Parameter = new SqlParameter {
                     ParameterName = "FunctionId",
                     Value = 5
            };

    var DBdata = entity.Database.SqlQuery<Course>("exec GetFunctionByID @FunctionId ", Parameter).ToList<Functions>();
}

I was getting below error when trying to create a new component under a folder.

error: More than one module matches. Use skip-import option to skip importing the component into the closest module.

I have used below command and new component got created successfully under a folder.

 ng g c folderName/my_newComponent ---module ../app

In operating systems like Ubuntu python comes preinstalled. So the default version is python 2.7 you can confirm the version by typing below command in your terminal

python -V

if you installed it but didn't set default version you will see

python 2.7

in terminal. I will tell you how to set the default python version in Ubuntu.

A simple safe way would be to use an alias. Place this into ~/.bashrc or ~/.bash_aliases file:

alias python=python3

After adding the above in the file, run the command below:

source ~/.bash_aliases or source ~/.bashrc

now check python version again using python -V

if python version 3.x.x one, then the error is in your syntax like using print with parenthesis. change it to

test = input("enter the test")
print(test)

package will add packaged jar or war to your target folder, We can check it when, we empty the target folder (using mvn clean) and then run mvn package.
install will do all the things that package does, additionally it will add packaged jar or war in local repository as well. We can confirm it by checking in your .m2 folder.

I had the same error when I tried to migrate Drupal database to a new local apache server(I am using XAMPP on Windows machine). Actually I don't know the meaning of this error, but after trying steps below, I imported the database without errors. Hope this could help:

Changing php.ini at C:\xampp\php\php.ini

max_execution_time = 600
max_input_time = 600
memory_limit = 1024M
post_max_size = 1024M

Changing my.ini at C:\xampp\mysql\bin\my.ini

max_allowed_packet = 1024M

To only strip whitespaces (in my case spaces and tabs) from lines with at least one non-whitespace character (this way empty indented lines are not touched):

sed -i -r 's/([^ \t]+)[ \t]+$/\1/' "$file"

C99 standard on c >= '0' && c <= '9'

c >= '0' && c <= '9' (mentioned in another answer) works because C99 N1256 standard draft 5.2.1 "Character sets" says:

In both the source and execution basic character sets, the value of each character after 0 in the above list of decimal digits shall be one greater than the value of the previous.

ASCII is not guaranteed however.

You can use the function below which replaces the first occurrence of the word from right.

def replace_from_right(text: str, original_text: str, new_text: str) -> str:
    """ Replace first occurrence of original_text by new_text. """
    return text[::-1].replace(original_text[::-1], new_text[::-1], 1)[::-1]

Use the array_count_values function.

$countValues = array_count_values($myArray);

echo $countValues["Ben"];

Selecting a specific page from Project properties does not solve my problem.

In MVC 4 open App_Start/RouteConfig.cs

For example, if you want to change startup page to Login:

routes.MapRoute(
        "Default", // Route name
        "",        // URL with parameters
        new { controller = "Account", action = "Login"}  // Parameter defaults
    );

You can't have duplicate keys in a Map. You can rather create a Map<Key, List<Value>>, or if you can, use Guava's Multimap.

Multimap<Integer, String> multimap = ArrayListMultimap.create();
multimap.put(1, "rohit");
multimap.put(1, "jain");

System.out.println(multimap.get(1));  // Prints - [rohit, jain]

And then you can get the java.util.Map using the Multimap#asMap() method.

Just to add to the answers, I think the specific reason in this case, in addition to the misplaced no-repeat, is the space between url and (:

background-image: url ('/image/btn.png') no-repeat; /* Won't work */
background-image: url('/image/btn.png'); /* Should work */

From "Find duplicate rows with PostgreSQL" here's smart solution:

select * from (
  SELECT id,
  ROW_NUMBER() OVER(PARTITION BY column1, column2 ORDER BY id asc) AS Row
  FROM tbl
) dups
where 
dups.Row > 1

Try this code:

final String[] str = {"one","two","three","asdfgf"};
final RelativeLayout rl = (RelativeLayout) findViewById(R.id.rl);
final TextView[] tv = new TextView[10];

for (int i=0; i<str.length; i++)
{
    tv[i] = new TextView(this); 
    RelativeLayout.LayoutParams params=new RelativeLayout.LayoutParams
         ((int)LayoutParams.WRAP_CONTENT,(int)LayoutParams.WRAP_CONTENT);
    params.leftMargin = 50;
    params.topMargin  = i*50;
    tv[i].setText(str[i]);
    tv[i].setTextSize((float) 20);
    tv[i].setPadding(20, 50, 20, 50);
    tv[i].setLayoutParams(params);
    rl.addView(tv[i]);  
}

double total = 44;
String total2= new Double(total).toString();

this code works

The constructor is called when Angular "instanciates/constructs" the component. The ngOnInit method is a hook which represents the initialization part of the component lifecycle. A good practice is to use it only for service injection:

constructor(private 
    service1: Service1,
    service2: Service2
){};

Even if it is possible, you should not do some "work" inside. If you want to launch some action which have to occur at component "initialization", use ngOnInit:

ngOnInit(){
    service1.someWork();
};

Moreover, actions that involve input properties, coming from a parent component, can't be done in the contructor. They should be placed in ngOnInit method or another hook. It is the same for element related to the view (the DOM), for example, viewchild elements:

@Input itemFromParent: string;
@ViewChild('childView') childView;

constructor(){
    console.log(itemFromParent); // KO
    // childView is undefined here
};

ngOnInit(){
    console.log(itemFromParent); // OK
    // childView is undefined here, you can manipulate here
};

An example that uses RecursiveDirectoryIterator class, it's a convenient way to iterate recursively over filesystem.

$output = array();
foreach( new RecursiveIteratorIterator( 
    new RecursiveDirectoryIterator( 'path', FilesystemIterator::SKIP_DOTS | FilesystemIterator::UNIX_PATHS ) ) as $value ) {      
        if ( $value->isFile() ) {
            $output[] = array( $value->getMTime(), $value->getRealPath() );
        }
}

usort ( $output, function( $a, $b ) {
    return $a[0] > $b[0];
});

You can do this via a couple ways.

One is when you run your application, you can pass it a flag.

java -Dgate.home="http://gate.ac.uk/wiki/code-repository" your_application

Or set it programmatically in code before the piece of code that needs this property set. Java keeps a Properties object for System wide configuration.

Properties props = System.getProperties();
props.setProperty("gate.home", "http://gate.ac.uk/wiki/code-repository");

If you don't know the size of the browser you can simply center in CSS with the following code:

HTML code:

<div class="firstDiv">Some Text</div>  

CSS code:

 .firstDiv {
  width: 500px;

  position: fixed;
  top: 50%;
  left: 50%;
  transform: translate(-50%, -50%);

  background-color: #F1F1F1;
 }

This also helps in any unforeseen changes in the future.

Open Control Panel Administrative Tools Services Select Extended services tab

Find SQL Server(MSSQLSERVER) & SQL Server(SQLEXPRESS) Stop these services and Start again (from the start & stop button displayed above)

Done.

To set a default value to a column, try this:

ALTER TABLE tb_TableName
ALTER COLUMN Record_Status SET DEFAULT 'default value'

try this code

data.php

    <table border="1">
<tr>
    <th>NO.</th>
    <th>NAME</th>
    <th>Major</th>
</tr>
<?php
//connection to mysql
mysql_connect("localhost", "root", ""); //server , username , password
mysql_select_db("codelution");

//query get data
$sql = mysql_query("SELECT * FROM student ORDER BY id ASC");
$no = 1;
while($data = mysql_fetch_assoc($sql)){
    echo '
    <tr>
        <td>'.$no.'</td>
        <td>'.$data['name'].'</td>
        <td>'.$data['major'].'</td>
    </tr>
    ';
    $no++;
}
?>

code for excel file

export.php

<?php
// The function header by sending raw excel
header("Content-type: application/vnd-ms-excel");
// Defines the name of the export file "codelution-export.xls"
header("Content-Disposition: attachment; filename=codelution-export.xls");
// Add data table
include 'data.php';
?>

if mysqli version

$sql="SELECT * FROM user_details";
$result=mysqli_query($conn,$sql);
if(mysqli_num_rows($result) > 0)
{
    $no = 1;
            while($data = mysqli_fetch_assoc($result))
            {echo '
    <tr>
        <<td>'.$no.'</td>
        <td>'.$data['name'].'</td>
        <td>'.$data['major'].'</td>

    </tr>
    ';
    $no++;

http://codelution.com/development/web/easy-ways-to-export-data-from-mysql-to-excel-with-php/

Use parentheses to group the individual branches:

IF EXIST D:\RPS_BACKUP\backups_to_zip\ (goto zipexist) else goto zipexistcontinue

In your case the parser won't ever see the else belonging to the if because goto will happily accept everything up to the end of the command. You can see a similar issue when using echo instead of goto.

Also using parentheses will allow you to use the statements directly without having to jump around (although I wasn't able to rewrite your code to actually use structured programming techniques; maybe it's too early or it doesn't lend itself well to block structures as the code is right now).

import io, pygame, zipfile
archive = zipfile.ZipFile('images.zip', 'r')

# read bytes from archive
img_data = archive.read('img_01.png')

# create a pygame-compatible file-like object from the bytes
bytes_io = io.BytesIO(img_data)

img = pygame.image.load(bytes_io)

I was trying to figure this out for myself just now and thought this might be useful for anyone who comes across this question in the future.

How to Use Sockets in JavaScript/HTML?

There is no facility to use general-purpose sockets in JS or HTML. It would be a security disaster, for one.

There is WebSocket in HTML5. The client side is fairly trivial:

socket= new WebSocket('ws://www.example.com:8000/somesocket');
socket.onopen= function() {
    socket.send('hello');
};
socket.onmessage= function(s) {
    alert('got reply '+s);
};

You will need a specialised socket application on the server-side to take the connections and do something with them; it is not something you would normally be doing from a web server's scripting interface. However it is a relatively simple protocol; my noddy Python SocketServer-based endpoint was only a couple of pages of code.

In any case, it doesn't really exist, yet. Neither the JavaScript-side spec nor the network transport spec are nailed down, and no browsers support it.

You can, however, use Flash where available to provide your script with a fallback until WebSocket is widely available. Gimite's web-socket-js is one free example of such. However you are subject to the same limitations as Flash Sockets then, namely that your server has to be able to spit out a cross-domain policy on request to the socket port, and you will often have difficulties with proxies/firewalls. (Flash sockets are made directly; for someone without direct public IP access who can only get out of the network through an HTTP proxy, they won't work.)

Unless you really need low-latency two-way communication, you are better off sticking with XMLHttpRequest for now.

A Singleton (and this isn't tied to C#, it's an OO design pattern) is when you want to allow only ONE instance of a class to be created throughout your application. Useages would typically include global resources, although I will say from personal experience, they're very often the source of great pain.

You can use just forEach. No stream at all:

fruits.forEach(fruit -> fruit.setName(fruit.getName() + "s"));

This:

ORDER BY 1

...is known as an "Ordinal" - the number stands for the column based on the number of columns defined in the SELECT clause. In the query you provided, it means:

ORDER BY A.PAYMENT_DATE

It's not a recommended practice, because:

1. It's not obvious/explicit
2. If the column order changes, the query is still valid so you risk ordering by something you didn't intend

In your case, expand columns of that database in the object explorer. Drag the columns in to the query area.

And then just delete one or two columns which you don't want and then run it. I'm open to any suggestions easier than this.

I've noticed that if you set the theme in the AndroidManifest, it seems to get rid of that short time where you can see the action bar. So, try adding this to your manifest:

<android:theme="@android:style/Theme.NoTitleBar">

Just add it to your application tag to apply it app-wide.

There are a number of people with this difficulty. The prevailing answer is that you can't protect content from editing while allowing unhindered sorting. Your options are:

1) Allow editing and sorting :(

2) Apply protection and create buttons with code to sort using VBA. There are other posts explaining how to do this. I think there are two methods, either (1) get the code to unprotect the sheet, apply the sort, then re-protect the sheet, or (2) have the sheet protected using UserInterfaceOnly:=True.

3) Lorie's answer which does not allow users to select cells (https://stackoverflow.com/a/15390698/269953)

4) One solution that I haven't seen discussed is using VBA to provide some basic protection. For example, detect and revert changes using Worksheet_Change. It's far from an ideal solution however.

5) You could keep the sheet protected when the user is selecting the data and unprotected when the user has the header is selected. This leaves countless ways the users could mess up the data while also causing some usability issues, but at least reduces the odds of pesky co-workers thoughtlessly making unwanted changes.

Private Sub Worksheet_SelectionChange(ByVal Target As Range)
    If (Target.row = HEADER_ROW) Then
        wsMainTable.Unprotect Password:=PROTECTION_PASSWORD
    Else
        wsMainTable.Protect Password:=PROTECTION_PASSWORD, UserInterfaceOnly:=True
    End If
End Sub

Using map and lambda function can produce a list of hex values, which can be printed (or used for other purposes)

>>> s = 'Hello 1 2 3 \x01\x02\x03 :)'

>>> map(lambda c: hex(ord(c)), s)
['0x48', '0x65', '0x6c', '0x6c', '0x6f', '0x20', '0x31', '0x20', '0x32', '0x20', '0x33', '0x20', '0x1', '0x2', '0x3', '0x20', '0x3a', '0x29']

Are you looking for actual infinity or the minimal finite value? If the former, use

-numeric_limits<double>::infinity()

which only works if

numeric_limits<double>::has_infinity

Otherwise, you should use

numeric_limits<double>::lowest()

which was introduces in C++11.

If lowest() is not available, you can fall back to

-numeric_limits<double>::max()

which may differ from lowest() in principle, but normally doesn't in practice.

I have used POI.

If you use that, keep on eye those cell formatters: create one and use it several times instead of creating each time for cell, it isa huge memory consumption difference or large data.

An absolutely positioned element is actually positioned regarding a relative parent, or the nearest found relative parent. So the element with overflow: hidden should be between relative and absolute positioned elements:

<div class="relative-parent">
  <div class="hiding-parent">
    <div class="child"></div>
  </div>
</div>

.relative-parent {
  position:relative;
}
.hiding-parent {
  overflow:hidden;
}
.child {
  position:absolute; 
}

You're obviously not closing your file descriptors before opening new ones. Are you on windows or linux?

Update: Mercurial has added --amend which should be the preferred option now.

You can rollback the last commit (but only the last one) with hg rollback and then reapply it.

Important: this permanently removes the latest commit (or pull). So if you've done a hg update that commit is no longer in your working directory then it's gone forever. So make a copy first.

Other than that, you cannot change the repository's history (including commit messages), because everything in there is check-summed. The only thing you could do is prune the history after a given changeset, and then recreate it accordingly.

None of this will work if you have already published your changes (unless you can get hold of all copies), and you also cannot "rewrite history" that include GPG-signed commits (by other people).

import json

json_data = json.dumps({
  "result":[
    {
      "run":[
        {
          "action":"stop"
        },
        {
          "action":"start"
        },
        {
          "action":"start"
        }
      ],
      "find": "true"
    }
  ]
})

item_dict = json.loads(json_data)
print len(item_dict['result'][0]['run'])

Convert it in dict.

You cannot achieve the desired solution with CSS z-index either, as z-index is only relative to the parent element. So if you have parents A and B with respective children a and b, b's z-index is only relative to other children of B and a's z-index is only relative to other children of A.

The z-index of A and B are relative to each other if they share the same parent element, but all of the children of one will share the same relative z-index at this level.

Tail the log as a background job (&) and it will interleave with rspec output.

tail -f log/test.log &
bundle exec rspec

@ImportanceOfBeingErnest 's answer is good if you only want to change the linewidth inside the legend box. But I think it is a bit more complex since you have to copy the handles before changing legend linewidth. Besides, it can not change the legend label fontsize. The following two methods can not only change the linewidth but also the legend label text font size in a more concise way.

Method 1

import numpy as np
import matplotlib.pyplot as plt

# make some data
x = np.linspace(0, 2*np.pi)

y1 = np.sin(x)
y2 = np.cos(x)

# plot sin(x) and cos(x)
fig = plt.figure()
ax  = fig.add_subplot(111)
ax.plot(x, y1, c='b', label='y1')
ax.plot(x, y2, c='r', label='y2')

leg = plt.legend()
# get the individual lines inside legend and set line width
for line in leg.get_lines():
    line.set_linewidth(4)
# get label texts inside legend and set font size
for text in leg.get_texts():
    text.set_fontsize('x-large')

plt.savefig('leg_example')
plt.show()

Method 2

import numpy as np
import matplotlib.pyplot as plt

# make some data
x = np.linspace(0, 2*np.pi)

y1 = np.sin(x)
y2 = np.cos(x)

# plot sin(x) and cos(x)
fig = plt.figure()
ax  = fig.add_subplot(111)
ax.plot(x, y1, c='b', label='y1')
ax.plot(x, y2, c='r', label='y2')

leg = plt.legend()
# get the lines and texts inside legend box
leg_lines = leg.get_lines()
leg_texts = leg.get_texts()
# bulk-set the properties of all lines and texts
plt.setp(leg_lines, linewidth=4)
plt.setp(leg_texts, fontsize='x-large')
plt.savefig('leg_example')
plt.show()

The above two methods produce the same output image:

I just got this message and there is a very simple answer before trying the others. At the parent directory, type git init

This will initialize the directory for git. Then git add and git commit should work.

Here is the @Ygor solution in awk

awk 'c-->0;$0~s{if(b)for(c=b+1;c>1;c--)print r[(NR-c+1)%b];print;c=a}b{r[NR%b]=$0}' b=3 a=3 s="pattern" myfile

^{Note: Replace a and b variables with number of lines before and after.}

It's especially useful for system which doesn't support grep's -A, -B and -C parameters.