The definition for DTO can be found on Martin Fowler's site. DTOs are used to transfer parameters to methods and as return types. A lot of people use those in the UI, but others inflate domain objects from them.

If we need only one column to be numeric

yyz$b <- as.numeric(as.character(yyz$b))

But, if all the columns needs to changed to numeric, use lapply to loop over the columns and convert to numeric by first converting it to character class as the columns were factor.

yyz[] <- lapply(yyz, function(x) as.numeric(as.character(x)))

Both the columns in the OP's post are factor because of the string "n/a". This could be easily avoided while reading the file using na.strings = "n/a" in the read.table/read.csv or if we are using data.frame, we can have character columns with stringsAsFactors=FALSE (the default is stringsAsFactors=TRUE)

Regarding the usage of apply, it converts the dataset to matrix and matrix can hold only a single class. To check the class, we need

lapply(yyz, class)

Or

sapply(yyz, class)

Or check

str(yyz)

Both functions and aliases can use parameters as others have shown here. Additionally, I would like to point out a couple of other aspects:

1. function runs in its own scope, alias shares scope

It may be useful to know this difference in cases you need to hide or expose something. It also suggests that a function is the better choice for encapsulation.

function tfunc(){
    GlobalFromFunc="Global From Func" # Function set global variable by default
    local FromFunc="onetwothree from func" # Set a local variable

}

alias talias='local LocalFromAlias="Local from Alias";  GlobalFromAlias="Global From Alias" # Cant hide a variable with local here '
# Test variables set by tfunc
tfunc # call tfunc
echo $GlobalFromFunc # This is visible
echo $LocalFromFunc # This is not visible
# Test variables set by talias
# call talias
talias
echo $GlobalFromAlias # This is invisible
echo $LocalFromAlias # This variable is unset and unusable 

Output:

bash-3.2$     # Test variables set by tfunc
bash-3.2$     tfunc # call tfunc
bash-3.2$     echo $GlobalFromFunc # This is visible
Global From Func
bash-3.2$     echo $LocalFromFunc # This is not visible

bash-3.2$     # Test variables set by talias
bash-3.2$     # call talias
bash-3.2$     talias
bash: local: can only be used in a function
bash-3.2$     echo $GlobalFromAlias # This is invisible
Global From Alias
bash-3.2$ echo $LocalFromAlias # This variable is unset and unusable

2. wrapper script is a better choice

It has happened to me several times that an alias or function can not be found when logging in via ssh or involving switching usernames or multi-user environment. There are tips and tricks with sourcing dot files, or this interesting one with alias: alias sd='sudo ' lets this subsequent alias alias install='sd apt-get install' work as expect (notice the extra space in sd='sudo '). However, a wrapper script works better than a function or alias in cases like this. The main advantage with a wrapper script is that it is visible/executable for under intended path (i.e. /usr/loca/bin/) where as a function/alias needs to be sourced before it is usable. For example, you put a function in a ~/.bash_profile or ~/.bashrc for bash, but later switch to another shell (i.e. zsh) then the function is not visible anymore. So, when you are in doubt, a wrapper script is always the most reliable and portable solution.

I did something quite simple. I did not want to change the windows 7 environment variable. So I directly edited the Cygwin.bat file.

@echo off
SETLOCAL
set HOME=C:\path\to\home
C:
chdir C:\apps\cygwin\bin
bash --login -i
ENDLOCAL

This just starts the local shell with this home directory; that is what I wanted. I am not going to remotely access this, so this worked for me.

BUILD_NUMBER is the current build number. You can use it in the command you execute for the job, or just use it in the script your job executes.

See the Jenkins documentation for the full list of available environment variables. The list is also available from within your Jenkins instance at http://hostname/jenkins/env-vars.html.

You may use gitignore for advanced gitignore file generation. It's fast, easy and cutting edge tags are automatically generated for you.

Use this link for most of jetbrains softwares (intelij, phpstorm...) jetbrains .gitignore file

[edit]

Below is the generated gitignore file for Jetbrains Softwares, this will prevent you from sharing sensitive informations (passwords, keystores, db passwords...) used by any of Jetbrains software to manage projects.

# Created by https://www.gitignore.io

### Intellij ###
# Covers JetBrains IDEs: IntelliJ, RubyMine, PhpStorm, AppCode, PyCharm

*.iml

## Directory-based project format:
.idea/
# if you remove the above rule, at least ignore the following:

# User-specific stuff:
# .idea/workspace.xml
# .idea/tasks.xml
# .idea/dictionaries

# Sensitive or high-churn files:
# .idea/dataSources.ids
# .idea/dataSources.xml
# .idea/sqlDataSources.xml
# .idea/dynamic.xml
# .idea/uiDesigner.xml

# Gradle:
# .idea/gradle.xml
# .idea/libraries

# Mongo Explorer plugin:
# .idea/mongoSettings.xml

## File-based project format:
*.ipr
*.iws

## Plugin-specific files:

# IntelliJ
/out/

# mpeltonen/sbt-idea plugin
.idea_modules/

# JIRA plugin
atlassian-ide-plugin.xml

# Crashlytics plugin (for Android Studio and IntelliJ)
com_crashlytics_export_strings.xml
crashlytics.properties
crashlytics-build.properties

Generated code is also well commented. hope it helps :)

Also you can use agg function,

df.groupby(['Name', 'Fruit'])['Number'].agg('sum')

The way I resolved it is by using Fragments. These are backwards compatible until API 4 by using the support library.

You make a "wrapper" layout with a FrameLayout in it.

Example:

<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
     android:layout_width="match_parent"
     android:layout_height="match_parent"
     android:orientation="vertical" >

     <FrameLayout xmlns:android="http://schemas.android.com/apk/res/android"
          android:id="@+id/fragment_container"
          android:layout_width="match_parent"
          android:layout_height="match_parent" />
</LinearLayout>

Then you make a FragmentActivity in wich you can replace the FrameLayout any time you want.

Example:

public class SampleFragmentActivity extends FragmentActivity
{

     @Override
 public void onCreate(Bundle savedInstanceState)
 {
    super.onCreate(savedInstanceState);
    setContentView(R.layout.wrapper);

    // Check that the activity is using the layout version with
    // the fragment_container FrameLayout
    if (findViewById(R.id.fragment_container) != null)
    {

        // However, if we're being restored from a previous state,
        // then we don't need to do anything and should return or else
        // we could end up with overlapping fragments.
        if (savedInstanceState != null)
        {
            return;
        }
        updateLayout();
     }
  }

  private void updateLayout()
  {
     Fragment fragment = new SampleFragment();
     fragment.setArguments(getIntent().getExtras());

     // replace original fragment by new fragment
     getSupportFragmentManager().beginTransaction().replace(R.id.fragment_container, fragment).commit();
  }

In the Fragment you inflate/replace you can use the onStart and onCreateView like you normaly would use the onCreate of an activity.

Example:

public class SampleFragment extends Fragment
{

    @Override
    public View onCreateView(LayoutInflater inflater, ViewGroup container, Bundle savedInstanceState)
    {
        return inflater.inflate(R.layout.yourActualLayout, container, false);
    }

    @Override
    public void onStart()
    {
        // do something with the components, or not!
        TextView text = (TextView) getActivity().findViewById(R.id.text1);

        super.onStart();
    }
}

I have a bit different issue, on server 2012 somehow i forgot to enable asp.net 4.5 so if you have this issue, double check that you enable it.

I was experiencing this issue today and solved it by calling python -m pytest from the root of my project directory.

Calling pytest from the same location still caused issues.

My Project dir is organized as:

api/
 - server/
  - tests/
      - test_routes.py
  - routes/
      - routes.py
 - app.py

The module routes was imported in my test_routes.py as: from server.routes.routes import Routes

Hope that helps!

I had a problem where I needed the default action only after some custom action (enable otherwise disabled input fields on a form) had concluded. I wrapped the default action (submit()) into an own, recursive function (dosubmit()).

var prevdef=true;
var dosubmit=function(){
    if(prevdef==true){
        //here we can do something else first//
        prevdef=false;
        dosubmit();
    }
    else{
        $(this).submit();//which was the default action
    }
};

$('input#somebutton').click(function(){dosubmit()});

You can use this with replacement of CGRectZero

CGRect.zero

This should do it (not tested):

animals[2...3] = []

Edit: and you need to make it a var, not a let, otherwise it's an immutable constant.

If it is just for searching then you may be able to use CONCATENATE_WS. This would allow wild card searching. There may be performance issues depending on the size of the table.

SELECT * 
FROM pages 
WHERE CONCAT_WS('', column1, column2, column3) LIKE '%keyword%'

You can simply put "." the dot sign. I've had a cmd application that was requiring the path and I was already in the needed directory and I used the dot symbol.

Hope it helps.

What you need is a split user-defined function. With that, the solution looks like

With SplitValues As
    (
    Select T.Name, Z.Position, Z.Value
        , Row_Number() Over ( Partition By T.Name Order By Z.Position ) As Num
    From Table As T
        Cross Apply dbo.udf_Split( T.Name, ' ' ) As Z
    )
Select Name
    , FirstName.Value
    , Case When ThirdName Is Null Then SecondName Else ThirdName End As LastName
From SplitValues As FirstName
    Left Join SplitValues As SecondName
        On S2.Name = S1.Name
            And S2.Num = 2
    Left Join SplitValues As ThirdName
        On S2.Name = S1.Name
            And S2.Num = 3
Where FirstName.Num = 1

Here's a sample split function:

Create Function [dbo].[udf_Split]
(   
    @DelimitedList nvarchar(max)
    , @Delimiter nvarchar(2) = ','
)
RETURNS TABLE 
AS
RETURN 
    (
    With CorrectedList As
        (
        Select Case When Left(@DelimitedList, Len(@Delimiter)) <> @Delimiter Then @Delimiter Else '' End
            + @DelimitedList
            + Case When Right(@DelimitedList, Len(@Delimiter)) <> @Delimiter Then @Delimiter Else '' End
            As List
            , Len(@Delimiter) As DelimiterLen
        )
        , Numbers As 
        (
        Select TOP( Coalesce(DataLength(@DelimitedList)/2,0) ) Row_Number() Over ( Order By c1.object_id ) As Value
        From sys.columns As c1
            Cross Join sys.columns As c2
        )
    Select CharIndex(@Delimiter, CL.list, N.Value) + CL.DelimiterLen As Position
        , Substring (
                    CL.List
                    , CharIndex(@Delimiter, CL.list, N.Value) + CL.DelimiterLen     
                    , CharIndex(@Delimiter, CL.list, N.Value + 1)                           
                        - ( CharIndex(@Delimiter, CL.list, N.Value) + CL.DelimiterLen ) 
                    ) As Value
    From CorrectedList As CL
        Cross Join Numbers As N
    Where N.Value <= DataLength(CL.List) / 2
        And Substring(CL.List, N.Value, CL.DelimiterLen) = @Delimiter
    )

I got this working : -

$.get('api.php', 'client=mikescafe', function(data) {
...
});

It sends via get the string ?client=mikescafe then collect this variable in api.php, and use it in your mysql statement.

If you really want to use PHP as your backend for socket.io ,here are what I found. Two socket.io php server side alternative.

https://github.com/walkor/phpsocket.io

https://github.com/RickySu/phpsocket.io

Exmaple codes for the first repository like this.

use PHPSocketIO\SocketIO;

// listen port 2021 for socket.io client
$io = new SocketIO(2021);
$io->on('connection', function($socket)use($io){
  $socket->on('chat message', function($msg)use($io){
    $io->emit('chat message', $msg);
  });
});

In case you don't have access to functools.partial, you could use a wrapper function for this, as well.

def target(lock):
    def wrapped_func(items):
        for item in items:
            # Do cool stuff
            if (... some condition here ...):
                lock.acquire()
                # Write to stdout or logfile, etc.
                lock.release()
    return wrapped_func

def main():
    iterable = [1, 2, 3, 4, 5]
    pool = multiprocessing.Pool()
    lck = multiprocessing.Lock()
    pool.map(target(lck), iterable)
    pool.close()
    pool.join()

This makes target() into a function that accepts a lock (or whatever parameters you want to give), and it will return a function that only takes in an iterable as input, but can still use all your other parameters. That's what is ultimately passed in to pool.map(), which then should execute with no problems.

I am starting out with python and I use id when I use the interactive shell to see whether my variables are assigned to the same thing or if they just look the same.

Every value is an id, which is a unique number related to where it is stored in the memory of the computer.

I have created an open-source hackable local testing server that you can get running in minutes. You can create new API's, define your own response and hack it in any ways you wish to.

Github Link : https://github.com/prabodhprakash/localTestingServer

If your variable data1$c is a factor, it's more efficient to change the labels of the factor levels than to create a new vector of characters:

levels(data1$c) <- sub("_", "-", levels(data1$c))


            a b   c
1  0.73945260 a A-B
2  0.75998815 b A-B
3  0.19576725 c A-B
4  0.85932140 d A-B
5  0.80717115 e A-C
6  0.09101492 f A-C
7  0.10183586 g A-C
8  0.97742424 h A-C
9  0.21364521 i A-C
10 0.02389782 j A-C

Change all "es6" and "es7" to "es" in your polyfills.ts and polyfills.ts (Optional).

• From: import 'core-js/es6/symbol';
• To: import 'core-js/es/symbol';

You just need to create an offset bypass to how far you want the backwards reading to go. So, we use getcwd() to get the path and explode (split into array) to fetch the data between $root and the ending of the path.

function getRoot($root = "public_html") {
    return explode($root, getcwd())[0].$root."/";
}

The question title is too wide and the author's need is more specific. In my case, I needed to extract all elements from nested list like in the example below:

Example:

input -> [1,2,[3,4]]
output -> [1,2,3,4]

The code below gives me the result, but I would like to know if anyone can create a simpler answer:

def get_elements_from_nested_list(l, new_l):
    if l is not None:
        e = l[0]
        if isinstance(e, list):
            get_elements_from_nested_list(e, new_l)
        else:
            new_l.append(e)
        if len(l) > 1:
            return get_elements_from_nested_list(l[1:], new_l)
        else:
            return new_l

Call of the method

l = [1,2,[3,4]]
new_l = []

get_elements_from_nested_list(l, new_l)

The \du command return:

Role name = postgres@implicit_files

And that command postgres=# \password postgres return error:

ERROR: role "postgres" does not exist.

But that postgres=# \password postgres@implicit_files run fine.

Also after sudo -u postgres createuser -s postgres the first variant also work.

Here goes a bunch of different ways to get the ID, including Scope_Identity:

https://stackoverflow.com/a/42655/1504882

In my case the actual process was different from the original started process.

Usually we bind the local-hosted services through the w3wp.exe process. In my case a custom process was used. Changing to that solved the problem.

One more thing, change from Release to Debug mode. In release mode PDB files are not getting updated with breakpoints details. So make sure you are debugging your application in Debug mode.

@MIP is right, but with newer versions of Safari, you will need to add sandbox attribute(HTML5) to give redirect access to the iFrame. There are a few specific values that can be added with a space between them.

Reference(you will need to scroll): https://developer.mozilla.org/en-US/docs/Web/HTML/Element/iframe

Ex:

<iframe sandbox="allow-top-navigation" src="http://google.com/"></iframe>

You are reinventing the wheel. Normal PowerShell scripts have parameters starting with -, like script.ps1 -server http://devserver

Then you handle them in param section in the beginning of the file.

You can also assign default values to your params, read them from console if not available or stop script execution:

 param (
    [string]$server = "http://defaultserver",
    [Parameter(Mandatory=$true)][string]$username,
    [string]$password = $( Read-Host "Input password, please" )
 )

Inside the script you can simply

write-output $server

since all parameters become variables available in script scope.

In this example, the $server gets a default value if the script is called without it, script stops if you omit the -username parameter and asks for terminal input if -password is omitted.

Update: You might also want to pass a "flag" (a boolean true/false parameter) to a PowerShell script. For instance, your script may accept a "force" where the script runs in a more careful mode when force is not used.

The keyword for that is [switch] parameter type:

 param (
    [string]$server = "http://defaultserver",
    [string]$password = $( Read-Host "Input password, please" ),
    [switch]$force = $false
 )

Inside the script then you would work with it like this:

if ($force) {
  //deletes a file or does something "bad"
}

Now, when calling the script you'd set the switch/flag parameter like this:

.\yourscript.ps1 -server "http://otherserver" -force

If you explicitly want to state that the flag is not set, there is a special syntax for that

.\yourscript.ps1 -server "http://otherserver" -force:$false

Links to relevant Microsoft documentation (for PowerShell 5.0; tho versions 3.0 and 4.0 are also available at the links):

• about_Scripts
• about_Functions
• about_Functions_Advanced_Parameters

I am using vim to edit my .bashrc file but you code use a gui editor such as gedit.

Steps:

Kindly subsitute /path/to/golang/projects below with your actual path location where you will store your golang projects.

Open .bashrc file in vim that is vim ~/.bashrc. Then add below lines at the end of the file.

# Setup Golang Development Environment ::
export GOROOT=/usr/local/go
export PATH=$PATH:$GOROOT/bin
 
# Third party go libraries will live under "~/golib" directory
export GOPATH="$HOME/golib"
export PATH="$PATH:$GOPATH/bin"
 
# Where your golang project code lives
export GOPATH=$GOPATH:/path/to/golang/projects

Save the file and type source ~/.bashrc to refresh your terminal session. Now try getting a package e.g. go get github.com/pilu/fresh and check your ~/golib/bin directory it should have fresh package in it.

Navigate to your /path/to/golang/projects and create three folders in there i.e. bin,src and pkg

Now place your project folder inside /path/to/golang/projects/src e.g. /path/to/golang/projects/src/myfancygolangprojectand you should be good to go. Put all your golang codebase in there mate.

You should do:

git commit . -m "save arezzo files"

Don't forget to enable tcp/ip connections in SQL SERVER Configuration tools

I compiled a few functions in a simple solution to cover all cases, with prompt fallback if needed.

window.copyToClipboard = function(text) {
  // Internet Explorer specific
  if (window.clipboardData && window.clipboardData.setData) {
    return clipboardData.setData("Text", text);
  }

  // All other modern browsers
  target = document.createElement("textarea");
  target.style.position = "absolute";
  target.style.left = "-9999px";
  target.style.top = "0";
  target.textContent = text;
  document.body.appendChild(target);
  target.focus();
  target.setSelectionRange(0, target.value.length);

  // Copy the selection of fall back to prompt
  try {
    document.execCommand("copy");
    target.remove();
    console.log('Copied to clipboard: "'+text+'"');
  }
  catch(e) {
    console.log("Can't copy string on this browser. Try to use Chrome, Firefox or Opera.")
    window.prompt("Copy to clipboard: Ctrl+C, Enter", text);
  }
}

Test it here: https://jsfiddle.net/jv0avz65/

Here's one other css only method that works pretty well and is based on this: http://zerosixthree.se/vertical-align-anything-with-just-3-lines-of-css/

sass:

.modal {
    height: 100%;

    .modal-dialog {
        top: 50% !important;
        margin-top:0;
        margin-bottom:0;
    }

    //keep proper transitions on fade in
    &.fade .modal-dialog {
        transform: translateY(-100%) !important;
    }
    &.in .modal-dialog {
        transform: translateY(-50%) !important;
    }
}

if you don't want to create a UDF in VBA or you can't, this could be an alternative.

=Cell("Filename",A1) this will give you the full file name, and from this you could get the user name with something like this:

=Mid(A1,Find("\",A1,4)+1;Find("\";A1;Find("\";A1;4))-2)

This Formula runs only from a workbook saved earlier.

You must start from 4th position because of the first slash from the drive.

You can also use time library:

import time

start = time.time()

# your code

# end

print(f'Time: {time.time() - start}')

A lot of people use (click) option so I will share this too.

<button (click)="function1()" (click)="function2()">Button</button>

I like the idea of seting tomcat6 memory based on available server memory (it is cool because I don't have to change the setup after hardware upgrade). Here is my (a bit extended memory setup):

export CATALINA_OPTS="-Xmx`cat /proc/meminfo | grep MemTotal | awk '{ print $2*0.75 } '`k -Xms`cat /proc/meminfo | grep MemTotal | awk '{ print $2*0.75 } '`k -XX:NewSize=`cat /proc/meminfo | grep MemTotal | awk '{ print $2*0.15 } '`k -XX:MaxNewSize=`cat /proc/meminfo | grep MemTotal | awk '{ print $2*0.15 } '`k -XX:PermSize=`cat /proc/meminfo | grep MemTotal | awk '{ print $2*0.15 } '`k -XX:MaxPermSize=`cat /proc/meminfo | grep MemTotal | awk '{ print $2*0.15 } '`k"

Put it to: "{tomcat}/bin/startup.sh" (e.g. "/usr/share/tomcat6/bin" for Ubuntu 10.10)

Yes oracle is :

select * from user_tables

That is if you only want objects owned by the logged in user/schema otherwise you can use all_tables or dba_tables which includes system tables.

I'm not sure it's a good idea to use a GoTo but if you do want to use it, you can do something like this:

Select Case parameter 
    Case "userID"
        ' does something here.
    Case "packageID"
        ' does something here.
    Case "mvrType" 
        If otherFactor Then 
            ' does something here. 
        Else 
            GoTo caseElse
        End If 
    Case Else
caseElse:
        ' does some processing... 
End Select

As I said, although it works, GoTo is not good practice, so here are some alternative solutions:

Using elseif...

If parameter = "userID" Then
    ' does something here.
ElseIf parameter = "packageID" Then
    ' does something here.
ElseIf parameter = "mvrType" AndAlso otherFactor Then
    ' does something here.
Else
    'does some processing...
End If

Using a boolean value...

Dim doSomething As Boolean

Select Case parameter
Case "userID"
     ' does something here.
Case "packageID"
     ' does something here.
Case "mvrType"
     If otherFactor Then
          ' does something here. 
     Else
          doSomething = True
     End If
Case Else
     doSomething = True
End Select

If doSomething Then
     ' does some processing... 
End If

Instead of setting a boolean variable you could also call a method directly in both cases...

Json.Net prefers to use the default (parameterless) constructor on an object if there is one. If there are multiple constructors and you want Json.Net to use a non-default one, then you can add the [JsonConstructor] attribute to the constructor that you want Json.Net to call.

[JsonConstructor]
public Result(int? code, string format, Dictionary<string, string> details = null)
{
    ...
}

It is important that the constructor parameter names match the corresponding property names of the JSON object (ignoring case) for this to work correctly. You do not necessarily have to have a constructor parameter for every property of the object, however. For those JSON object properties that are not covered by the constructor parameters, Json.Net will try to use the public property accessors (or properties/fields marked with [JsonProperty]) to populate the object after constructing it.

If you do not want to add attributes to your class or don't otherwise control the source code for the class you are trying to deserialize, then another alternative is to create a custom JsonConverter to instantiate and populate your object. For example:

class ResultConverter : JsonConverter
{
    public override bool CanConvert(Type objectType)
    {
        return (objectType == typeof(Result));
    }

    public override object ReadJson(JsonReader reader, Type objectType, object existingValue, JsonSerializer serializer)
    {
        // Load the JSON for the Result into a JObject
        JObject jo = JObject.Load(reader);

        // Read the properties which will be used as constructor parameters
        int? code = (int?)jo["Code"];
        string format = (string)jo["Format"];

        // Construct the Result object using the non-default constructor
        Result result = new Result(code, format);

        // (If anything else needs to be populated on the result object, do that here)

        // Return the result
        return result;
    }

    public override bool CanWrite
    {
        get { return false; }
    }

    public override void WriteJson(JsonWriter writer, object value, JsonSerializer serializer)
    {
        throw new NotImplementedException();
    }
}

Then, add the converter to your serializer settings, and use the settings when you deserialize:

JsonSerializerSettings settings = new JsonSerializerSettings();
settings.Converters.Add(new ResultConverter());
Result result = JsonConvert.DeserializeObject<Result>(jsontext, settings);

I think you can use typeahead.js. There are typescript definitions for it. so it'll be easy to use it i guess if you are using typescript for development.

Open a connection to your server first (SQL IDE) from the home screen. Then use the context menu in the schema tree to run a query that simply selects rows from the selected table. The LIMIT attached to that is to avoid reading too many rows by accident. This limit can be switched off (or adjusted) in the preferences dialog.

This quick way to select rows is however not very flexible. Normally you would run a query (File / New Query Tab) in the editor with additional conditions, like a sort order:

As others have pointed out modulus is based on remainder system.

I think an easier way to think about modulus is what remains after a dividend (number to be divided) has been fully divided by a divisor. So if we think about 5%7, when you divide 5 by 7, 7 can go into 5 only 0 times and when you subtract 0 (7*0) from 5 (just like we learnt back in elementary school), then the remainder would be 5 ( the mod). See the illustration below.

   0
  ______
7) 5    
__-0____
   5

With the same logic, -5 mod 7 will be -5 ( only 0 7s can go in -5 and -5-0*7 = -5). With the same token -5 mod -7 will also be -5. A few more interesting cases:

5 mod (-3) = 2 i.e. 5 - (-3*-1)

(-5) mod (-3) = -2 i.e. -5 - (-3*1) = -5+3

I know this posting is old, but I had the same problem, WAMP would not go online (green) while SKYPE was running. I simply closed SKYPE, ran WAMP and then reloaded SKYPE. I have not verified this, but I think SKYPE port corrected to allow for WAMP settings. At least I have not experienced any problems doing it this way

To pass the ellipses on, you have to convert them to a va_list and use that va_list in your second function. Specifically;

void format_string(char *fmt,va_list argptr, char *formatted_string);


void debug_print(int dbg_lvl, char *fmt, ...) 
{    
 char formatted_string[MAX_FMT_SIZE];

 va_list argptr;
 va_start(argptr,fmt);
 format_string(fmt, argptr, formatted_string);
 va_end(argptr);
 fprintf(stdout, "%s",formatted_string);
}

just run these command

sudo apt-get install phpmyadmin php-mbstring php-gettext

sudo service apache2 restart

Or you can follow this post...

Check This Post

You can reset the plot by doing this:

dev.off()

Go to Menu Tool -> SQL Output, Run the PL/SQL statement, the output will show on SQL Output panel.

Check if IIS server installed the URL rewrite feature.
If it is not installed then make sure your web.config file don't have the URL rewrite related configuration

<!-- Make sure don't have below config, if server have not installed url rewrite feature. -->
<rewrite>
  <rules>
    <rule name="Fail bad requests">
      <match url=".*"/> ...

Some time we copied the config from legacy server and straight away deploy to brand new server, then we may encounter such kind of 500 issue.

YES it is almost possible to forced you have to call to methods in the same order and at the same time this ones are:

System.gc ();
System.runFinalization ();

even if is just one object to clean the use of this two methods at the same time force the garbage collector to use the finalise() method of unreachable object freeing the memory assigned and doing what the finalize() method states.

HOWEVER it is a terrible practice to use the garbage collector because the use of it could introduce an over load to the software that may be even worst than on the memory, the garbage collector has his own thread which is not possible to control plus depending on the algorithm used by the gc could take more time and is consider very inefficient, you should check your software if it worst with the help of the gc because it is definitely broke, a good solution must not depend on the gc.

NOTE: just to keep on mind this will works only if in the finalize method is not a reassignment of the object, if this happens the object will keep alive an it will have a resurrection which is technically possible.

Countdown of user input

Interface Screenshot

import React, { Component } from 'react';
import './App.css';

class App extends Component {
  constructor() {
    super();
    this.state = {
      hours: 0,
      minutes: 0,
      seconds:0
    }
    this.hoursInput = React.createRef();
    this.minutesInput= React.createRef();
    this.secondsInput = React.createRef();
  }

  inputHandler = (e) => {
    this.setState({[e.target.name]: e.target.value});
  }

  convertToSeconds = ( hours, minutes,seconds) => {
    return seconds + minutes * 60 + hours * 60 * 60;
  }

  startTimer = () => {
    this.timer = setInterval(this.countDown, 1000);
  }

  countDown = () => {
    const  { hours, minutes, seconds } = this.state;
    let c_seconds = this.convertToSeconds(hours, minutes, seconds);

    if(c_seconds) {

      // seconds change
      seconds ? this.setState({seconds: seconds-1}) : this.setState({seconds: 59});

      // minutes change
      if(c_seconds % 60 === 0 && minutes) {
        this.setState({minutes: minutes -1});
      }

      // when only hours entered
      if(!minutes && hours) {
        this.setState({minutes: 59});
      }

      // hours change
      if(c_seconds % 3600 === 0 && hours) {
        this.setState({hours: hours-1});
      }

    } else {
      clearInterval(this.timer);
    }
  }


  stopTimer = () => {
    clearInterval(this.timer);
  }

  resetTimer = () => {
    this.setState({
      hours: 0,
      minutes: 0,
      seconds: 0
    });
    this.hoursInput.current.value = 0;
    this.minutesInput.current.value = 0;
    this.secondsInput.current.value = 0;
  }


  render() {
    const { hours, minutes, seconds } = this.state;

    return (
      <div className="App">
         <h1 className="title"> (( React Countdown )) </h1>
         <div className="inputGroup">
            <h3>Hrs</h3>
            <input ref={this.hoursInput} type="number" placeholder={0}  name="hours"  onChange={this.inputHandler} />
            <h3>Min</h3>
            <input  ref={this.minutesInput} type="number"  placeholder={0}   name="minutes"  onChange={this.inputHandler} />
            <h3>Sec</h3>
            <input   ref={this.secondsInput} type="number"  placeholder={0}  name="seconds"  onChange={this.inputHandler} />
         </div>
         <div>
            <button onClick={this.startTimer} className="start">start</button>
            <button onClick={this.stopTimer}  className="stop">stop</button>
            <button onClick={this.resetTimer}  className="reset">reset</button>
         </div>
         <h1> Timer {hours}: {minutes} : {seconds} </h1>
      </div>

    );
  }
}

export default App;

I use to work on UNIX-like machines, but recently I have had to do some work with Java on a Windows 7 machine. I have had that problem and this is the I've solved it. It has worked right for me so I hope it can be used for whoever who may have this problem in the future.

These steps are exposed considering a default Java installation on drive C. You should change what it is necessary in case your installation is not a default one.

Change Java default VM on Windows 7

Suppose we have installed Java 8 but for whatever reason we want to keep with Java 7.

1- Start a cmd as administrator

2- Go to C:\ProgramData\Oracle\Java

3- Rename the current directory javapath to javapath_<version_it_refers_to>. E.g.: rename javapath javapath_1.8

4- Create a javapath_<version_you_want_by_default> directory. E.g.: mkdir javapath_1.7

5- cd into it and create the following links:

cd javapath_1.7
mklink java.exe "C:\Program Files\Java\jre7\bin\java.exe"
mklink javaw.exe "C:\Program Files\Java\jre7\bin\javaw.exe"
mklink javaws.exe "C:\Program Files\Java\jre7\bin\javaws.exe"

6- cd out and create a directory link javapath pointing to the desired javapath. E.g.: mklink /D javapath javapath_1.7

7- Open the register and change the key HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Runtime Environment\CurrentVersion to have the value 1.7

At this point if you execute java -version you should see that you are using java version 1.7:

java version "1.7.0_71"
Java(TM) SE Runtime Environment (build 1.7.0_71-b14)
Java HotSpot(TM) 64-Bit Server VM (build 24.71-b01, mixed mode)

8- Finally it is a good idea to create the environment variable JAVA_HOME. To do that I create a directory link named CurrentVersion in C:\Program Files\Java pointing to the Java version I'm interested in. E.g.:

cd C:\Program Files\Java\
mklink /D CurrentVersion .\jdk1.7.0_71

9- And once this is done:

• Right click My Computer and select Properties.
• On the Advanced tab, select Environment Variables, and then edit/create JAVA_HOME to point to where the JDK software is located, in that case, C:\Program Files\Java\CurrentVersion

Here's a function I wrote which works similarly to the Unix time command:

function time {
    Param(
        [Parameter(Mandatory=$true)]
        [string]$command,
        [switch]$quiet = $false
    )
    $start = Get-Date
    try {
        if ( -not $quiet ) {
            iex $command | Write-Host
        } else {
            iex $command > $null
        }
    } finally {
        $(Get-Date) - $start
    }
}

Source: https://gist.github.com/bender-the-greatest/741f696d965ed9728dc6287bdd336874

Given some SVG:

<div id="main">
  <svg id="octocat" xmlns="http://www.w3.org/2000/svg" width="400px" height="400px" viewBox="-60 0 420 330" style="fill:#fff;stroke: #000; stroke-opacity: 0.1">
    <path id="puddle" d="m296.94 295.43c0 20.533-47.56 37.176-106.22 37.176-58.67 0-106.23-16.643-106.23-37.176s47.558-37.18 106.23-37.18c58.66 0 106.22 16.65 106.22 37.18z"/>
    <path class="shadow-legs" d="m161.85 331.22v-26.5c0-3.422-.619-6.284-1.653-8.701 6.853 5.322 7.316 18.695 7.316 18.695v17.004c6.166.481 12.534.773 19.053.861l-.172-16.92c-.944-23.13-20.769-25.961-20.769-25.961-7.245-1.645-7.137 1.991-6.409 4.34-7.108-12.122-26.158-10.556-26.158-10.556-6.611 2.357-.475 6.607-.475 6.607 10.387 3.775 11.33 15.105 11.33 15.105v23.622c5.72.98 11.71 1.79 17.94 2.4z"/>
    <path class="shadow-legs" d="m245.4 283.48s-19.053-1.566-26.16 10.559c.728-2.35.839-5.989-6.408-4.343 0 0-19.824 2.832-20.768 25.961l-.174 16.946c6.509-.025 12.876-.254 19.054-.671v-17.219s.465-13.373 7.316-18.695c-1.034 2.417-1.653 5.278-1.653 8.701v26.775c6.214-.544 12.211-1.279 17.937-2.188v-24.113s.944-11.33 11.33-15.105c0-.01 6.13-4.26-.48-6.62z"/>
    <path id="cat" d="m378.18 141.32l.28-1.389c-31.162-6.231-63.141-6.294-82.487-5.49 3.178-11.451 4.134-24.627 4.134-39.32 0-21.073-7.917-37.931-20.77-50.759 2.246-7.25 5.246-23.351-2.996-43.963 0 0-14.541-4.617-47.431 17.396-12.884-3.22-26.596-4.81-40.328-4.81-15.109 0-30.376 1.924-44.615 5.83-33.94-23.154-48.923-18.411-48.923-18.411-9.78 24.457-3.733 42.566-1.896 47.063-11.495 12.406-18.513 28.243-18.513 47.659 0 14.658 1.669 27.808 5.745 39.237-19.511-.71-50.323-.437-80.373 5.572l.276 1.389c30.231-6.046 61.237-6.256 80.629-5.522.898 2.366 1.899 4.661 3.021 6.879-19.177.618-51.922 3.062-83.303 11.915l.387 1.36c31.629-8.918 64.658-11.301 83.649-11.882 11.458 21.358 34.048 35.152 74.236 39.484-5.704 3.833-11.523 10.349-13.881 21.374-7.773 3.718-32.379 12.793-47.142-12.599 0 0-8.264-15.109-24.082-16.292 0 0-15.344-.235-1.059 9.562 0 0 10.267 4.838 17.351 23.019 0 0 9.241 31.01 53.835 21.061v32.032s-.943 11.33-11.33 15.105c0 0-6.137 4.249.475 6.606 0 0 28.792 2.361 28.792-21.238v-34.929s-1.142-13.852 5.663-18.667v57.371s-.47 13.688-7.551 18.881c0 0-4.723 8.494 5.663 6.137 0 0 19.824-2.832 20.769-25.961l.449-58.06h4.765l.453 58.06c.943 23.129 20.768 25.961 20.768 25.961 10.383 2.357 5.663-6.137 5.663-6.137-7.08-5.193-7.551-18.881-7.551-18.881v-56.876c6.801 5.296 5.663 18.171 5.663 18.171v34.929c0 23.6 28.793 21.238 28.793 21.238 6.606-2.357.474-6.606.474-6.606-10.386-3.775-11.33-15.105-11.33-15.105v-45.786c0-17.854-7.518-27.309-14.87-32.3 42.859-4.25 63.426-18.089 72.903-39.591 18.773.516 52.557 2.803 84.873 11.919l.384-1.36c-32.131-9.063-65.692-11.408-84.655-11.96.898-2.172 1.682-4.431 2.378-6.755 19.25-.80 51.38-.79 82.66 5.46z"/>
    <path id="face" d="m258.19 94.132c9.231 8.363 14.631 18.462 14.631 29.343 0 50.804-37.872 52.181-84.585 52.181-46.721 0-84.589-7.035-84.589-52.181 0-10.809 5.324-20.845 14.441-29.174 15.208-13.881 40.946-6.531 70.147-6.531 29.07-.004 54.72-7.429 69.95 6.357z"/>
    <path id="eyes" d="m160.1 126.06 c0 13.994-7.88 25.336-17.6 25.336-9.72 0-17.6-11.342-17.6-25.336 0-13.992 7.88-25.33 17.6-25.33 9.72.01 17.6 11.34 17.6 25.33z m94.43 0 c0 13.994-7.88 25.336-17.6 25.336-9.72 0-17.6-11.342-17.6-25.336 0-13.992 7.88-25.33 17.6-25.33 9.72.01 17.6 11.34 17.6 25.33z"/>
    <path id="pupils" d="m154.46 126.38 c0 9.328-5.26 16.887-11.734 16.887s-11.733-7.559-11.733-16.887c0-9.331 5.255-16.894 11.733-16.894 6.47 0 11.73 7.56 11.73 16.89z m94.42 0 c0 9.328-5.26 16.887-11.734 16.887s-11.733-7.559-11.733-16.887c0-9.331 5.255-16.894 11.733-16.894 6.47 0 11.73 7.56 11.73 16.89z"/>
    <circle id="nose" cx="188.5" cy="148.56" r="4.401"/>
    <path id="mouth" d="m178.23 159.69c-.26-.738.128-1.545.861-1.805.737-.26 1.546.128 1.805.861 1.134 3.198 4.167 5.346 7.551 5.346s6.417-2.147 7.551-5.346c.26-.738 1.067-1.121 1.805-.861s1.121 1.067.862 1.805c-1.529 4.324-5.639 7.229-10.218 7.229s-8.68-2.89-10.21-7.22z"/>
    <path id="octo" d="m80.641 179.82 c0 1.174-1.376 2.122-3.07 2.122-1.693 0-3.07-.948-3.07-2.122 0-1.175 1.377-2.127 3.07-2.127 1.694 0 3.07.95 3.07 2.13z m8.5 4.72 c0 1.174-1.376 2.122-3.07 2.122-1.693 0-3.07-.948-3.07-2.122 0-1.175 1.377-2.127 3.07-2.127 1.694 0 3.07.95 3.07 2.13z m5.193 6.14 c0 1.174-1.376 2.122-3.07 2.122-1.693 0-3.07-.948-3.07-2.122 0-1.175 1.377-2.127 3.07-2.127 1.694 0 3.07.95 3.07 2.13z m4.72 7.08 c0 1.174-1.376 2.122-3.07 2.122-1.693 0-3.07-.948-3.07-2.122 0-1.175 1.377-2.127 3.07-2.127 1.694 0 3.07.95 3.07 2.13z m5.188 6.61 c0 1.174-1.376 2.122-3.07 2.122-1.693 0-3.07-.948-3.07-2.122 0-1.175 1.377-2.127 3.07-2.127 1.694 0 3.07.95 3.07 2.13z m7.09 5.66 c0 1.174-1.376 2.122-3.07 2.122-1.693 0-3.07-.948-3.07-2.122 0-1.175 1.377-2.127 3.07-2.127 1.694 0 3.07.95 3.07 2.13z m9.91 3.78 c0 1.174-1.376 2.122-3.07 2.122-1.693 0-3.07-.948-3.07-2.122 0-1.175 1.377-2.127 3.07-2.127 1.694 0 3.07.95 3.07 2.13z m9.87 0 c0 1.174-1.376 2.122-3.07 2.122-1.693 0-3.07-.948-3.07-2.122 0-1.175 1.377-2.127 3.07-2.127 1.694 0 3.07.95 3.07 2.13z m10.01 -1.64 c0 1.174-1.376 2.122-3.07 2.122-1.693 0-3.07-.948-3.07-2.122 0-1.175 1.377-2.127 3.07-2.127 1.694 0 3.07.95 3.07 2.13z"/>
    <path id="drop" d="m69.369 186.12l-3.066 10.683s-.8 3.861 2.84 4.546c3.8-.074 3.486-3.627 3.223-4.781z"/>
  </svg>
</div>

Using jQuery, for instance, you could do:

var _currentFill = "#f00"; // red
$svg = $("#octocat");
$("#face", $svg).attr('style', "fill:"+_currentFill); })

I provided a coloring book demo as an answer to another stackoverflow question: http://bl.ocks.org/4545199. Tested on Safari, Chrome, and Firefox.

pip3 not pip. You can create an alias like you did with python3 if you like.

You can access individual elements with the array [] operator:

<c:out value="${attachments[0].id}" />

This will work for arrays and lists. It won't work for maps and sets. In that case you must put the key of the element inside the brackets.

Try this out. The basic strategy is to sort the particular column independently and remember the original row of the entry. The rest of the code will cycle through the sorted column data and swap out the rows in the array. The tricky part is remembing to update the original column as the swap portion will effectively alter the original column.

        public class Pair<T> {
            public int Index;
            public T Value;
            public Pair(int i, T v) {
                Index = i;
                Value = v;
            }
        }
        static IEnumerable<Pair<T>> Iterate<T>(this IEnumerable<T> source) {
            int index = 0;
            foreach ( var cur in source) {
                yield return new Pair<T>(index,cur);
                index++;
            }
        }
        static void Sort2d(string[][] source, IComparer comp, int col) {
            var colValues = source.Iterate()
                .Select(x => new Pair<string>(x.Index,source[x.Index][col])).ToList();
            colValues.Sort((l,r) => comp.Compare(l.Value, r.Value));
            var temp = new string[source[0].Length];
            var rest = colValues.Iterate();
            while ( rest.Any() ) {
                var pair = rest.First();
                var cur = pair.Value;
                var i = pair.Index;
                if (i == cur.Index ) {
                    rest = rest.Skip(1);
                    continue;
                }

                Array.Copy(source[i], temp, temp.Length);
                Array.Copy(source[cur.Index], source[i], temp.Length);
                Array.Copy(temp, source[cur.Index], temp.Length);
                rest = rest.Skip(1);
                rest.Where(x => x.Value.Index == i).First().Value.Index = cur.Index;
            }
        }

        public static void Test1() {
            var source = new string[][] 
            {
                new string[]{ "foo", "bar", "4" },
                new string[] { "jack", "dog", "1" },
                new string[]{ "boy", "ball", "2" },
                new string[]{ "yellow", "green", "3" }
            };
            Sort2d(source, StringComparer.Ordinal, 2);
        }

Found one possible helper:

https://github.com/theironcook/Backbone.ModelBinder

and for people who don't want to get in contact with forms at all: https://github.com/powmedia/backbone-forms

I will take a closer look at the first link and than give some feedback :)

As strings are immutable in Python, just create a new string which includes the value at the desired index.

Assuming you have a string s, perhaps s = "mystring"

You can quickly (and obviously) replace a portion at a desired index by placing it between "slices" of the original.

s = s[:index] + newstring + s[index + 1:]

You can find the middle by dividing your string length by 2 len(s)/2

If you're getting mystery inputs, you should take care to handle indices outside the expected range

def replacer(s, newstring, index, nofail=False):
    # raise an error if index is outside of the string
    if not nofail and index not in range(len(s)):
        raise ValueError("index outside given string")

    # if not erroring, but the index is still not in the correct range..
    if index < 0:  # add it to the beginning
        return newstring + s
    if index > len(s):  # add it to the end
        return s + newstring

    # insert the new string between "slices" of the original
    return s[:index] + newstring + s[index + 1:]

This will work as

replacer("mystring", "12", 4)
'myst12ing'

Add XML comments to the publicly visible types and members of course :)

///<Summary>
/// Gets the answer
///</Summary>
public int MyMethod()
{
   return 42;
}

You need these <summary> type comments on all members - these also show up in the intellisense popup menu.

The reason you get this warning is because you've set your project to output documentation xml file (in the project settings). This is useful for class libraries (.dll assemblies) which means users of your .dll are getting intellisense documentation for your API right there in visual studio.

I recommend you get yourself a copy of the GhostDoc Visual Studio AddIn.. Makes documenting much easier.

A BLOB is a Binary Large OBject. It is used to store large quantities of binary data in a database.

You can use it to store any kind of binary data that you want, includes images, video, or any other kind of binary data that you wish to store.

Different DBMSes treat BLOBs in different ways; you should read the documentation of the databases you are interested in to see how (and if) they handle BLOBs.

Use below code for passing string from one jsp to another jsp

A.jsp

   <% String userid="Banda";%>
    <form action="B.jsp" method="post">
    <%
    session.setAttribute("userId", userid);
        %>
        <input type="submit"
                            value="Login">
    </form>

B.jsp

    <%String userid = session.getAttribute("userId").toString(); %>
    Hello<%=userid%>

Yes, you can use a script like this to generate another script

SET NOCOUNT ON;
DECLARE @NewRole varchar(100), @SourceRole varchar(100);

-- Change as needed
SELECT @SourceRole = 'Giver', @NewRole = 'Taker';

SELECT
    state_desc + ' ' + permission_name + ' ON ' + OBJECT_NAME(major_id) + ' TO ' + @NewRole
FROM
    sys.database_permissions
WHERE
    grantee_principal_id = DATABASE_PRINCIPAL_ID(@SourceRole) AND
    -- 0 = DB,  1 = object/column, 3 = schema. 1 is normally enough
    class <= 3

This is taken from my answer here

From Angular 6.1, you can now avoid the hassle and pass extraOptions to your RouterModule.forRoot() as a second parameter and can specify scrollPositionRestoration: enabled to tell Angular to scroll to top whenever the route changes.

By default you will find this in app-routing.module.ts:

const routes: Routes = [
  {
    path: '...'
    component: ...
  },
  ...
];

@NgModule({
  imports: [
    RouterModule.forRoot(routes, {
      scrollPositionRestoration: 'enabled', // Add options right here
    })
  ],
  exports: [RouterModule]
})
export class AppRoutingModule { }

Angular Official Docs

You can use Selenium Emulation in WebDriver:

selenium = new WebDriverBackedSelenium(driver,url);
selenium.windowMaximize();

This doesn't say how to "fix" the problem - that's already been done in other answers; it exists to draw out the details and applicable documentation references.

When using String.replaceAll or any of the applicable Matcher replacers, pay attention to the replacement string and how it is handled:

Note that backslashes (\) and dollar signs ($) in the replacement string may cause the results to be different than if it were being treated as a literal replacement string. Dollar signs may be treated as references to captured subsequences as described above, and backslashes are used to escape literal characters in the replacement string.

As pointed out by isnot2bad in a comment, Matcher.quoteReplacement may be useful here:

Returns a literal replacement String for the specified String. .. The String produced will match the sequence of characters in s treated as a literal sequence. Slashes (\) and dollar signs ($) will be given no special meaning.

It means maven is not able to download artifacts from repository. Following steps will help you:

1. Go to repository browser and check if artifact exist.
2. Check settings.xml to see if proper respository is specified.
3. Check proxy settings.

There are a couple of things that need to be adjusted in your layout:

1. You are nesting col elements within form-group elements. This should be the other way around (the form-group should be within the col-sm-xx element).

2. You should always use a row div for each new "row" in your design. In your case, you would need at least 5 rows (Username, Password and co, Title/First/Last name, email, Language). Otherwise, your problematic .col-sm-12 is still on the same row with the above 3 .col-sm-4 resulting in a total of columns greater than 12, and causing the overlap problem.

Here is a fixed demo.

And an excerpt of what the problematic section HTML should become:

<fieldset>
    <legend>Personal Information</legend>
    <div class='row'>
        <div class='col-sm-4'>    
            <div class='form-group'>
                <label for="user_title">Title</label>
                <input class="form-control" id="user_title" name="user[title]" size="30" type="text" />
            </div>
        </div>
        <div class='col-sm-4'>
            <div class='form-group'>
                <label for="user_firstname">First name</label>
                <input class="form-control" id="user_firstname" name="user[firstname]" required="true" size="30" type="text" />
            </div>
        </div>
        <div class='col-sm-4'>
            <div class='form-group'>
                <label for="user_lastname">Last name</label>
                <input class="form-control" id="user_lastname" name="user[lastname]" required="true" size="30" type="text" />
            </div>
        </div>
    </div>
    <div class='row'>
        <div class='col-sm-12'>
            <div class='form-group'>

                <label for="user_email">Email</label>
                <input class="form-control required email" id="user_email" name="user[email]" required="true" size="30" type="text" />
            </div>
        </div>
    </div>
</fieldset>

I saw that someone was wondering how to do it for another controller.

In my case I had all of my email templates in the Views/Email folder, but you could modify this to pass in the controller in which you have views associated for.

public static string RenderViewToString(Controller controller, string viewName, object model)
    {
        var oldController = controller.RouteData.Values["controller"].ToString();

        if (controller.GetType() != typeof(EmailController))
            controller.RouteData.Values["controller"] = "Email";

        var oldModel = controller.ViewData.Model;
        controller.ViewData.Model = model;
        try
        {
            using (var sw = new StringWriter())
            {
                var viewResult = ViewEngines.Engines.FindView(controller.ControllerContext, viewName,
                                                                           null);

                var viewContext = new ViewContext(controller.ControllerContext, viewResult.View, controller.ViewData, controller.TempData, sw);
                viewResult.View.Render(viewContext, sw);

                //Cleanup
                controller.ViewData.Model = oldModel;
                controller.RouteData.Values["controller"] = oldController;

                return sw.GetStringBuilder().ToString();
            }
        }
        catch (Exception ex)
        {
            Elmah.ErrorSignal.FromCurrentContext().Raise(ex);

            throw ex;
        }
    }

Essentially what this does is take a controller, such as AccountController and modify it to think it's an EmailController so that the code will look in the Views/Email folder. It's necessary to do this because the FindView method doesn't take a straight up path as a parameter, it wants a ControllerContext.

Once done rendering the string, it returns the AccountController back to its initial state to be used by the Response object.

Jlordo approach covers specific situation. If you try to build an abstract method out of it, you can face a difficulty to check if 'textFrom' is before 'textTo'. Otherwise method can return a match for some other occurance of 'textFrom' in text.

Here is a ready-to-go abstract method that covers this disadvantage:

  /**
   * Get text between two strings. Passed limiting strings are not 
   * included into result.
   *
   * @param text     Text to search in.
   * @param textFrom Text to start cutting from (exclusive).
   * @param textTo   Text to stop cuutting at (exclusive).
   */
  public static String getBetweenStrings(
    String text,
    String textFrom,
    String textTo) {

    String result = "";

    // Cut the beginning of the text to not occasionally meet a      
    // 'textTo' value in it:
    result =
      text.substring(
        text.indexOf(textFrom) + textFrom.length(),
        text.length());

    // Cut the excessive ending of the text:
    result =
      result.substring(
        0,
        result.indexOf(textTo));

    return result;
  }

Use two single-quotes

SQL> SELECT 'D''COSTA' name FROM DUAL;

NAME
-------
D'COSTA

Alternatively, use the new (10g+) quoting method:

SQL> SELECT q'$D'COSTA$' NAME FROM DUAL;

NAME
-------
D'COSTA

You can create a jQuery function to unload Bootstrap CSS files at the size of 768px, and load it back when resized to lower width. This way you can design a mobile website without touching the desktop version, by using col-xs-* only

function resize() {
if ($(window).width() > 767) {
$('link[rel=stylesheet][href~="bootstrap.min.css"]').prop('disabled', true);
$('link[rel=stylesheet][href~="bootstrap-theme.min.css"]').prop('disabled', true);
}   
else {
$('link[rel=stylesheet][href~="bootstrap.min.css"]').prop('disabled', false);
$('link[rel=stylesheet][href~="bootstrap-theme.min.css"]').prop('disabled', false);
}
}

and

$(document).ready(function() {
$(window).resize(resize);
resize();   

if ($(window).width() > 767) {
$('link[rel=stylesheet][href~="bootstrap.min.css"]').prop('disabled', true);
$('link[rel=stylesheet][href~="bootstrap-theme.min.css"]').prop('disabled', true);
}
});

To plot multiple graphs on the same figure you will have to do:

from numpy import *
import math
import matplotlib.pyplot as plt

t = linspace(0, 2*math.pi, 400)
a = sin(t)
b = cos(t)
c = a + b

plt.plot(t, a, 'r') # plotting t, a separately 
plt.plot(t, b, 'b') # plotting t, b separately 
plt.plot(t, c, 'g') # plotting t, c separately 
plt.show()

Swift 3.x - 5.x

The Best Example is to Create a Local Logfile with an Extension .txt that can visible and show in the "Files App" with current date and Time as a File Name

just add this code in info.plist enable these two features

  UIFileSharingEnabled
  LSSupportsOpeningDocumentsInPlace

and this Function Below

var logfileName : String = ""

func getTodayString() -> String{

    let date = Date()
    let calender = Calendar.current
    let components = calender.dateComponents([.year,.month,.day,.hour,.minute,.second], from: date)

    let year = components.year
    let month = components.month
    let day = components.day
    let hour = components.hour
    let minute = components.minute
    let second = components.second

    let today_string = String(year!) + "-" + String(month!) + "-" + String(day!) + "-" + String(hour!)  + "" + String(minute!) + "" +  String(second!)+".txt"

    return today_string

}

func LogCreator(){
    logfileName = getTodayString()

    print("LogCreator: Logfile Generated Named: \(logfileName)")

    let file = logfileName //this is the file. we will write to and read from it

    let text = "some text" //just a text

    if let dir = FileManager.default.urls(for: .documentDirectory, in: .userDomainMask).first {

        let fileURL = dir.appendingPathComponent(file)
        let documentPath = NSSearchPathForDirectoriesInDomains(.documentDirectory,.userDomainMask, true)[0]
        print("LogCreator: The Logs are Stored at location \(documentPath)")


        //writing
        do {
            try text.write(to: fileURL, atomically: false, encoding: .utf8)
        }
        catch {/* error handling here */}

        //reading
        do {
            let text2 = try String(contentsOf: fileURL, encoding: .utf8)
            print("LogCreator: The Detail log are :-\(text2)")
        }
        catch {/* error handling here */}
    }
}


  [1]: https://i.stack.imgur.com/4eg12.png

I don't like to suggest it, but if you must try - first call

gmap.fitBounds(bounds);

Then create a new Thread/AsyncTask, have it sleep for 20-50ms or so and then call

gmap.setZoom( Math.max(6, gmap.getZoom()) );

from the UI thread (use a handler or the onPostExecute method for AsyncTask).

I don't know if it works, just a suggestion. Other than that you'd have to somehow calculate the zoom level from your points yourself, check if it's too low, correct it and then just call gmap.setZoom(correctedZoom)

Math.Round(inputValue, 2, MidpointRounding.AwayFromZero)

I wanted this:

MapVC is a Map in full screen.

When I press a button, it opens PopupVC (not in full screen) above the map.

When I press a button in PopupVC, it returns to MapVC, and then I want to execute viewDidAppear.

I did this:

MapVC.m: in the button action, a segue programmatically, and set delegate

- (void) buttonMapAction{
   PopupVC *popvc = [self.storyboard instantiateViewControllerWithIdentifier:@"popup"];
   popvc.delegate = self;
   [self presentViewController:popvc animated:YES completion:nil];
}

- (void)dismissAndPresentMap {
  [self dismissViewControllerAnimated:NO completion:^{
    NSLog(@"dismissAndPresentMap");
    //When returns of the other view I call viewDidAppear but you can call to other functions
    [self viewDidAppear:YES];
  }];
}

PopupVC.h: before @interface, add the protocol

@protocol PopupVCProtocol <NSObject>
- (void)dismissAndPresentMap;
@end

after @interface, a new property

@property (nonatomic,weak) id <PopupVCProtocol> delegate;

PopupVC.m:

- (void) buttonPopupAction{
  //jump to dismissAndPresentMap on Map view
  [self.delegate dismissAndPresentMap];
}

Fastest Way to Clone an Array

I made this very plain utility function to test the time that it takes to clone an array. It is not 100% reliable however it can give you a bulk idea as for how long it takes to clone an existing array:

function clone(fn) {
  const arr = [...Array(1000000)];
  console.time('timer');
  fn(arr);
  console.timeEnd('timer');
}

And tested different approach:

1)   5.79ms -> clone(arr => Object.values(arr));
2)   7.23ms -> clone(arr => [].concat(arr));
3)   9.13ms -> clone(arr => arr.slice());
4)  24.04ms -> clone(arr => { const a = []; for (let val of arr) { a.push(val); } return a; });
5)  30.02ms -> clone(arr => [...arr]);
6)  39.72ms -> clone(arr => JSON.parse(JSON.stringify(arr)));
7)  99.80ms -> clone(arr => arr.map(i => i));
8) 259.29ms -> clone(arr => Object.assign([], arr));
9) Maximum call stack size exceeded -> clone(arr => Array.of(...arr));

UPDATE:

1. Tests were made back in 2018, so today most likely you'll get different result with current browsers.
2. Out of all of those, the only way to deep clone an array is by using JSON.parse(JSON.stringify(arr)).
   
   That said, do not use the above if your array might include functions as it will return null.
   Thank you @GilEpshtain for this update.

basically i use this in one of our apps: we want to overlay a playicon over a frame of a video:

Image playbutton;
try
{
    playbutton = Image.FromFile(/*somekindofpath*/);
}
catch (Exception ex)
{
    return;
}

Image frame;
try
{
    frame = Image.FromFile(/*somekindofpath*/);
}
catch (Exception ex)
{
    return;
}

using (frame)
{
    using (var bitmap = new Bitmap(width, height))
    {
        using (var canvas = Graphics.FromImage(bitmap))
        {
            canvas.InterpolationMode = InterpolationMode.HighQualityBicubic;
            canvas.DrawImage(frame,
                             new Rectangle(0,
                                           0,
                                           width,
                                           height),
                             new Rectangle(0,
                                           0,
                                           frame.Width,
                                           frame.Height),
                             GraphicsUnit.Pixel);
            canvas.DrawImage(playbutton,
                             (bitmap.Width / 2) - (playbutton.Width / 2),
                             (bitmap.Height / 2) - (playbutton.Height / 2));
            canvas.Save();
        }
        try
        {
            bitmap.Save(/*somekindofpath*/,
                        System.Drawing.Imaging.ImageFormat.Jpeg);
        }
        catch (Exception ex) { }
    }
}

Well i am trying to open a .vbs within a batch file without having to click open but the answer to this question is ...

SET APPDATA=%CD%

start (your file here without the brackets with a .vbs if it is a vbd file)

What about this?

return ((num + "").charAt(0) == '-');

This is what I used to close all open forms (except for the main form)

    private void CloseOpenForms()
    {

           // Close all open forms - except for the main form.  (This is usually OpenForms[0].
           // Closing a form decrmements the OpenForms count
           while (Application.OpenForms.Count > 1)
           {
               Application.OpenForms[Application.OpenForms.Count-1].Close();
           }
    }

Oracle provides a utility called tnsping:

R:\>tnsping someconnection

TNS Ping Utility for 32-bit Windows: Version 9.0.1.3.1 - Production on 27-AUG-20
08 10:38:07

Copyright (c) 1997 Oracle Corporation.  All rights reserved.

Used parameter files:
C:\Oracle92\network\ADMIN\sqlnet.ora
C:\Oracle92\network\ADMIN\tnsnames.ora

TNS-03505: Failed to resolve name

R:\>


R:\>tnsping entpr01

TNS Ping Utility for 32-bit Windows: Version 9.0.1.3.1 - Production on 27-AUG-20
08 10:39:22

Copyright (c) 1997 Oracle Corporation.  All rights reserved.

Used parameter files:
C:\Oracle92\network\ADMIN\sqlnet.ora
C:\Oracle92\network\ADMIN\tnsnames.ora

Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (COMMUNITY = **)
 (PROTOCOL = TCP) (Host = ****) (Port = 1521))) (CONNECT_DATA = (SID = ENTPR0
1)))
OK (40 msec)

R:\>

This should show what file you're using. The utility sits in the Oracle bin directory.

There is a bot that echoes your chat id upon starting a conversation.

Just search for @chatid_echo_bot and tap /start. It will echo your chat id.

Another option is @getidsbot which gives you much more information. This bot also gives information about a forwarded message (from user, to user, chad ids, etc) if you forward the message to the bot.

You can solve this by simply adding class to modal-header

<div class="modal-header bg-primary text-white">

Open the dll with a hex editor, like HxD

If the there is a "dt" on the 9th line it is 64bit.

If there is an "L." on the 9th line it is 32bit.

This is only one point where hibernate makes more problems than it solves. In my case there are many objects with the same identifier 0, because they are new and don't have one. The db generates them. Somewhere I have read that 0 signals Id not set. The intuitive way to persist them is iterating over them and saying hibernate to save the objects. But You can't do that - "Of course You should know that hibernate works this and that way, therefore You have to.." So now I can try to change Ids to Long instead of long and look if it then works. In the end it's easier to do it with a simple mapper by your own, because hibernate is just an additional intransparent burden. Another example: Trying to read parameters from one database and persist them in another forces you to do nearly all work manually. But if you have to do it anyway, using hibernate is just additional work.

if the response is like this

"GetDataResult": "[{\"UserID\":1,\"DeviceID\":\"d1254\",\"MobileNO\":\"056688\",\"Pak1\":true,\"pak2\":true,\"pak3\":false,\"pak4\":true,\"pak5\":true,\"pak6\":false,\"pak7\":false,\"pak8\":true,\"pak9\":false,\"pak10\":true,\"pak11\":false,\"pak12\":false}]"

you can parse like this

JSONObject jobj=new JSONObject(response);
        String c = jobj.getString("GetDataResult");         
        JSONArray jArray = new JSONArray(c);
        deviceId=jArray.getJSONObject(0).getString("DeviceID");

here the JsonArray size is 1.Otherwise you should use for loop for getting values.

It's impossible to say without seeing your actual code. Likely the reason is a code path through your function that doesn't execute a return statement. When the code goes down that path, the function ends with no value returned, and so returns None.

Updated: It sounds like your code looks like this:

def b(self, p, data): 
    current = p 
    if current.data == data: 
        return True 
    elif current.data == 1:
        return False 
    else: 
        self.b(current.next, data)

That else clause is your None path. You need to return the value that the recursive call returns:

    else:
        return self.b(current.next, data)

BTW: using recursion for iterative programs like this is not a good idea in Python. Use iteration instead. Also, you have no clear termination condition.

Apache PDFBox http://pdfbox.apache.org/

PDFMerger This application will take a list of pdf documents and merge them, saving the result in a new document.

usage: java -jar pdfbox-app-x.y.z.jar PDFMerger "Source PDF files (2 ..n)" "Target PDF file"

Just for the kicks.

Since I wasnt able to create linked server and since just connecting to production server was not enough to use INSERT INTO i did the following:

• created a backup of production server database
• restored the database on my test server
• executed the insert into statements

Its a backdoor solution, but since i had problems it worked for me.

Since i have created empty tables using SCRIPT TABLE AS / CREATE in order to transfer all the keys and indexes I couldnt use SELECT INTO. SELECT INTO only works if the tables do not exist on the destination location but it does not copy keys and indexes, so you have to do that manualy. The downside of using INSERT INTO statement is that you have to manualy provide with all the column names, plus it might give you some problems if some foreign key constraints fail.

Thanks to all anwsers, there are some great solutions but i have decided to accept marc_s anwser.

Change the img-class responsive to:

.img-responsive, x:-moz-any-link {
display: block;
max-width: 100%;
width: auto;
height: auto;

I've used most of them and can tell you that the best method is to test directly to each client. Once you are comfortable with sending you can send tests of your emails to gmail and if the design doesn't break then it's pretty safe on modern email clients.

You can check what is supported on which client here:

http://www.email-standards.org

They are formatting String. The Java specific syntax is given in java.util.Formatter.

The general syntax is as follows:

   %[argument_index$][flags][width][.precision]conversion

%02d performs decimal integer conversion d, formatted with zero padding (0 flag), with width 2. Thus, an int argument whose value is say 7, will be formatted into "07" as a String.

You may also see this formatting string in e.g. String.format.

Commonly used formats

These are just some commonly used formats and doesn't cover the syntax exhaustively.

Zero padding for numbers

System.out.printf("Agent %03d to the rescue!", 7);
// Agent 007 to the rescue!

Width for justification

You can use the - flag for left justification; otherwise it'll be right justification.

for (Map.Entry<Object,Object> prop : System.getProperties().entrySet()) {
    System.out.printf("%-30s : %50s%n", prop.getKey(), prop.getValue());
}

This prints something like:

java.version                   :                                 1.6.0_07
java.vm.name                   :               Java HotSpot(TM) Client VM
java.vm.vendor                 :                    Sun Microsystems Inc.
java.vm.specification.name     :       Java Virtual Machine Specification
java.runtime.name              :          Java(TM) SE Runtime Environment
java.vendor.url                :                     http://java.sun.com/

For more powerful message formatting, you can use java.text.MessageFormat. %n is the newline conversion (see below).

Hexadecimal conversion

System.out.println(Integer.toHexString(255));
// ff

System.out.printf("%d is %<08X", 255);
// 255 is 000000FF

Note that this also uses the < relative indexing (see below).

Floating point formatting

System.out.printf("%+,010.2f%n", 1234.567);
System.out.printf("%+,010.2f%n", -66.6666);
// +01,234.57
// -000066.67

For more powerful floating point formatting, use DecimalFormat instead.

%n for platform-specific line separator

System.out.printf("%s,%n%s%n", "Hello", "World");
// Hello,
// World

%% for an actual %-sign

System.out.printf("It's %s%% guaranteed!", 99.99);
// It's 99.99% guaranteed!

Note that the double literal 99.99 is autoboxed to Double, on which a string conversion using toString() is defined.

n$ for explicit argument indexing

System.out.printf("%1$s! %1$s %2$s! %1$s %2$s %3$s!",
    "Du", "hast", "mich"
);
// Du! Du hast! Du hast mich!

< for relative indexing

System.out.format("%s?! %<S?!?!?", "Who's your daddy");
// Who's your daddy?! WHO'S YOUR DADDY?!?!?

Related questions

• Why is String’s format(Object… args) defined as a static method?
• escaping formatting characters in java String.format
• Is it better practice to use String.format over string Concatenation in Java?
• Should I use Java’s String.format() if performance is important?
• Understanding the $ in Java’s format strings
• java decimal String format
• difference between system.out.printf and String.format
• What classes do you use to make string templates? -- MessageFormat with example

This is a lexicographical ordering. It just puts things in dictionary order.

ul li + li:before
{
    content:url(imgs/separator.gif);
}

Let me clarify what you're talking about: you want to test Foo in a testcase, which calls external method uses_some_other_method. Instead of calling the actual method, you want to mock the return value.

class Foo:
    def method_1():
       results = uses_some_other_method()
    def method_n():
       results = uses_some_other_method()

Suppose the above code is in foo.py and uses_some_other_method is defined in module bar.py. Here is the unittest:

import unittest
import mock

from foo import Foo


class TestFoo(unittest.TestCase):

    def setup(self):
        self.foo = Foo()

    @mock.patch('foo.uses_some_other_method')
    def test_method_1(self, mock_method):
        mock_method.return_value = 3
        self.foo.method_1(*args, **kwargs)

        mock_method.assert_called_with(*args, **kwargs)

If you want to change the return value every time you passed in different arguments, mock provides side_effect.

In Angular 2 you can do 3 types of bindings:

• [property]="expression" -> Any html property can link to an
  expression. In this case, if expression changes property will update, but this doesn't work the other way.
• (event)="expression" -> When event activates execute expression.
• [(ngModel)]="property" -> Binds the property from js (or ts) to html. Any update on this property will be noticeable everywhere.

An expression can be a value, an attribute or a method. For example: '4', 'controller.var', 'getValue()'

Example here

/var/lib/tomcat5.5/webapps/spaghetti/WEB-INF/lib/jsp-api-6.0.16.jar
/var/lib/tomcat5.5/webapps/spaghetti/WEB-INF/lib/servlet-api-6.0.16.jar

You should not have any server-specific libraries in the /WEB-INF/lib. Leave them in the appserver's own library. It would only lead to collisions in the classpath. Get rid of all appserver-specific libraries in /WEB-INF/lib (and also in JRE/lib and JRE/lib/ext if you have placed any of them there).

A common cause that the appserver-specific libraries are included in the webapp's library is that starters think that it is the right way to fix compilation errors of among others the javax.servlet classes not being resolveable. Putting them in webapp's library is the wrong solution. You should reference them in the classpath during compilation, i.e. javac -cp /path/to/server/lib/servlet.jar and so on, or if you're using an IDE, you should integrate the server in the IDE and associate the web project with the server. The IDE will then automatically take server-specific libraries in the classpath (buildpath) of the webapp project.

Hopefully people will find this answer as there are many, many posts about this on the web. Many people suggested it was an .htaccess problem, and for me it was. However, I had been looking in the .htaccess in the root, not in the .htaccess in the wp-admin folder. Normally, I work on this site in particular through terminal services, so when it booted me and I couldn't log back in, I was trying to access it from my home computer (and it's IP).

Silly me forgot the IP restriction I had placed in the wp-admin .htaccess file.

AuthName "Protected"
AuthType Basic
<Limit GET POST>
order deny,allow
deny from all
allow from 11.11.11.11
</Limit> 

If you have something like this in your wp-admin .htaccess files, that would easily explain why all the sites you work on ceased to function at the same time. Internet providers occasionally rotate IPs so that nobody is running a server from home without paying for it.

var arrofobject = [{"id":"197","category":"Damskie"},{"id":"198","category":"M\u0119skie"}];

$.each(arrofobject, function(index, val) {
    console.log(val.category);
});

var props = t.GetProperties().Where(
                prop => Attribute.IsDefined(prop, typeof(MyAttribute)));

This avoids having to materialize any attribute instances (i.e. it is cheaper than GetCustomAttribute[s]().

To reset the height of the div, just try

$("#someDiv").height('auto');

Use the following:

type file.txt | findstr /v ERROR | findstr /v REFERENCE

This has the advantage of using standard tools in the Windows OS, rather than having to find and install sed/awk/perl and such.

See the following transcript for it in operation:

C:\>type file.txt
Good Line of data
bad line of C:\Directory\ERROR\myFile.dll
Another good line of data
bad line: REFERENCE
Good line

C:\>type file.txt | findstr /v ERROR | findstr /v REFERENCE
Good Line of data
Another good line of data
Good line

The first thing you should do with date variables is confirm that R reads it as a Date. To do this, for the variable (i.e. vector/column) called Date, in the data frame called EPL2011_12, input

class(EPL2011_12$Date)

The output should read [1] "Date". If it doesn't, you should format it as a date by inputting

EPL2011_12$Date <- as.Date(EPL2011_12$Date, "%d-%m-%y")

Note that the hyphens in the date format ("%d-%m-%y") above can also be slashes ("%d/%m/%y"). Confirm that R sees it as a Date. If it doesn't, try a different formatting command

EPL2011_12$Date <- format(EPL2011_12$Date, format="%d/%m/%y")

Once you have it in Date format, you can use the subset command, or you can use brackets

WhateverYouWant <- EPL2011_12[EPL2011_12$Date > as.Date("2014-12-15"),]

Instead of appending element you can just do.

 document.getElementById("p").textContent += " this has just been added";

document.getElementById("p").textContent += " this has just been added";

<p id ="p">This is some text</p>

That's works for me accurately

let template = null;
    $('.modal').on('show.bs.modal', function(event) {
      template = $(this).html();
    });

    $('.modal').on('hidden.bs.modal', function(e) {
      $(this).html(template);
    });

First, make sure that the source page and the target page are both served through the file URI scheme. You can't force an http page to open a file page (but it works the other way around).

Next, your script that calls window.open() should be invoked by a user-initiated event, such as clicks, keypresses and the like. Simply calling window.open() won't work.

You can test this right here in this question page. Run these in Chrome's JavaScript console:

// Does nothing
window.open('http://google.com');

// Click anywhere within this page and the new window opens
$(document.body).unbind('click').click(function() { window.open('http://google.com'); });

// This will open a new window, but it would be blank
$(document.body).unbind('click').click(function() { window.open('file:///path/to/a/local/html/file.html'); });

You can also test if this works with a local file. Here's a sample HTML file that simply loads jQuery:

<html>
    <head>
        <script type="text/javascript" src="https://ajax.googleapis.com/ajax/libs/jquery/1.5.0/jquery.min.js"></script>
    </head>
    <body>
        <h5>Feel the presha</h5>
        <h3>Come play my game, I'll test ya</h3>
        <h1>Psycho- somatic- addict- insane!</h1>
    </body>
</html>

Then open Chrome's JavaScript console and run the statements above. The 3rd one will now work.

$("textarea[maxlength]").on("keydown paste", function (evt) {
            if ($(this).val().length > $(this).prop("maxlength")) {
                if (evt.type == "paste") {
                    $(this).val($(this).val().substr(0, $(this).prop("maxlength")));
                } else {
                    if ([8, 37, 38, 39, 40, 46].indexOf(evt.keyCode) == -1) {
                        evt.returnValue = false;
                        evt.preventDefault();
                    }
                }
            }
        });

I had a similar error, My Class is

public class ServerInfo
{
    public string Text { get; set; }
    public string Value { get; set; }
    public string PortNo { get; set; }

    public override string ToString()
    {
        return Text;
    }
}

But what I did, I casted my class to the SelectedItem property of the ComboBox. So, i'll have all of the class properties of the selected item.

// Code above
ServerInfo emailServer = (ServerInfo)cbServerName.SelectedItem;

mailClient.ServerName = emailServer.Value;
mailClient.ServerPort = emailServer.PortNo;

I hope this helps someone! Cheers!

As artfulrobot said in his answer:

git diff --name-status [SHA1 [SHA2]]

My example:

git diff --name-status 78a09k12067c24d8f117886c4723ccf111af4997 
4b95d595812211553070046bf2ebd807c0862cca
M       views/layouts/default.ctp
M       webroot/css/theme.css
A       webroot/img/theme/logo.png

If you want to pass custom Controller to a form_for while rendering a partial form you can use this:

<%= render 'form', :locals => {:controller => 'my_controller', :action => 'my_action'}%>

and then in the form partial use this local variable like this:

<%= form_for(:post, :url => url_for(:controller => locals[:controller], :action => locals[:action]), html: {class: ""} ) do |f| -%>

You need to call the AddAddress function once for each E-Mail address you want to send to. There are only two arguments for this function: recipient_email_address and recipient_name. The recipient name is optional and will not be used if not present.

$mailer->AddAddress('[email protected]', 'First Name');
$mailer->AddAddress('[email protected]', 'Second Name');
$mailer->AddAddress('[email protected]', 'Third Name');

You could use an array to store the recipients and then use a for loop. I hope it helps.

For reference : Why does angularjs include an empty option in select?

The empty option is generated when a value referenced by ng-model doesn't exist in a set of options passed to ng-options. This happens to prevent accidental model selection: AngularJS can see that the initial model is either undefined or not in the set of options and don't want to decide model value on its own.

In short: the empty option means that no valid model is selected (by valid I mean: from the set of options). You need to select a valid model value to get rid of this empty option.

Change your code like this

var MyApp=angular.module('MyApp1',[])
MyApp.controller('MyController', function($scope) {
  $scope.feed = {};

  //Configuration
  $scope.feed.configs = [
    {'name': 'Config 1',
     'value': 'config1'},
    {'name': 'Config 2',
     'value': 'config2'},
    {'name': 'Config 3',
     'value': 'config3'}
  ];
  //Setting first option as selected in configuration select
  $scope.feed.config = $scope.feed.configs[0].value;
});

<script src="https://ajax.googleapis.com/ajax/libs/angularjs/1.2.23/angular.min.js"></script>
<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>
<div ng-app="MyApp1">
  <div ng-controller="MyController">
    <input type="text" ng-model="feed.name" placeholder="Name" />
    <!-- <select ng-model="feed.config">
<option ng-repeat="template in configs">{{template.name}}</option>
</select> -->
    <select ng-model="feed.config" ng-options="template.value as template.name for template in feed.configs">
    </select>
  </div>
</div>

Working JSFiddle Demo

UPDATE (Dec 31, 2015)

If You don't want to set a default value and want to remove blank option,

<select ng-model="feed.config" ng-options="template.value as template.name for template in feed.configs">
      <option value="" selected="selected">Choose</option>
</select>

And in JS no need to initialize value.

$scope.feed.config = $scope.feed.configs[0].value;

The answer of ADTC works fine, but I've find another solution, so I post it here if someone wants something different.

I think ADTC's solution is better, but mine's also works.

Here is the other solution I found

select p.name
from   person p
where  instr(p.name,chr(8211)) > 0; --contains the character chr(8211) 
                                    --at least 1 time

Thank you.

Don't serialize FormData with POSTing to server. Do this:

this.uploadFileToUrl = function(file, title, text, uploadUrl){
    var payload = new FormData();

    payload.append("title", title);
    payload.append('text', text);
    payload.append('file', file);

    return $http({
        url: uploadUrl,
        method: 'POST',
        data: payload,
        //assign content-type as undefined, the browser
        //will assign the correct boundary for us
        headers: { 'Content-Type': undefined},
        //prevents serializing payload.  don't do it.
        transformRequest: angular.identity
    });
}

Then use it:

MyService.uploadFileToUrl(file, title, text, uploadUrl).then(successCallback).catch(errorCallback);

And if you do that very often, you could use a ViewSwitcher or a ViewFlipper to ease view substitution.

Android studio is based on Intellij Idea. In Intellij Idea you have to do the following from the GUI menu.

Build -> Rebuild Project

Use MaxMind GeoIP (or GeoIPLite if you are not ready to pay).

$gi = geoip_open('GeoIP.dat', GEOIP_MEMORY_CACHE);
$country = geoip_country_code_by_addr($gi, $_SERVER['REMOTE_ADDR']);
geoip_close($gi);

I think you already listed the best practice and that is NOT to use it unless REALLY necessary. I would strongly recommend looking at your code in more detail, using profiling tools potentially if needed to answer these questions first.

1. Do you have something in your code that is declaring items at a larger scope than needed
2. Is the memory usage really too high
3. Compare performance before and after using GC.Collect() to see if it really helps.

MYSQL_HOME variable value:C:\Program Files\MySQL\MySQL Server 5.0\bin %MYSQL_HOME%\bin

See the problem? This resolves to a path of C:\Program Files\MySQL\MySQL Server 5.0\bin\bin

All above information is correct, I'd also like to point out that the [AcceptVerbs()] annotation exists in both the System.Web.Mvc and System.Web.Http namespaces.

You want to use the System.Web.Http if it's a Web API controller.

If you have downloaded the AS + SDK bundle:

Assuming the defaults were left unchanged, you will find the SDK in C:\Users\%USERNAME%\AppData\Local\Android

If it is missing at this location, one of the following reasons apply: you have chosen a custom location, you missed to install the SDK at all, or (unlikely) they have changed the default install location.

Note #1: the AppData directory is hidden by default. If you have a standard Windows configuration, the C:\ path above should work "as is" (hit Win + R -> paste the path -> Enter).

Note #2: you will never find the SDK in the Android Studio directory unless you have explicitly put it in there. The reason is that those directories might be deleted after installing a newer version of Android Studio and you would have to re-install the SDK as well.

If you have retrieved the standalone SDK by some other means:

The SDK location may vary (from my experience), however (assuming the default configuration) you will most likely find it in C:\Program Files\Android or C:\Users\%USERNAME%

To increase the phpMyAdmin Session Timeout, open config.inc.php in the root phpMyAdmin directory and add this setting (anywhere).

$cfg['LoginCookieValidity'] = <your_new_timeout>;

Where <your_new_timeout> is some number larger than 1800.

Note:

Always keep on mind that a short cookie lifetime is all well and good for the development server. So do not do this on your production server.

According to MySQL 5.7 Reference Manual:

The default SQL mode in MySQL 5.7 includes these modes: ONLY_FULL_GROUP_BY, STRICT_TRANS_TABLES, NO_ZERO_IN_DATE, NO_ZERO_DATE, ERROR_FOR_DIVISION_BY_ZERO, NO_AUTO_CREATE_USER, and NO_ENGINE_SUBSTITUTION.

Since 0000-00-00 00:00:00 is not a valid DATETIME value, your database is broken. That is why MySQL 5.7 – which comes with NO_ZERO_DATE mode enabled by default – outputs an error when you try to perform a write operation.

You can fix your table updating all invalid values to any other valid one, like NULL:

UPDATE users SET created = NULL WHERE created < '0000-01-01 00:00:00'

Also, to avoid this problem, I recomend you always set current time as default value for your created-like fields, so they get automatically filled on INSERT. Just do:

ALTER TABLE users
ALTER created SET DEFAULT CURRENT_TIMESTAMP

This also works - it will remove all the folders called "a" and their contents:

rm -rf `find -type d -name a`

The following SQL Code will help you to calculate the median in MySQL using user defined variables.

create table employees(salary int);_x000D_
_x000D_
insert into employees values(8);_x000D_
insert into employees values(23);_x000D_
insert into employees values(45);_x000D_
insert into employees values(123);_x000D_
insert into employees values(93);_x000D_
insert into employees values(2342);_x000D_
insert into employees values(2238);_x000D_
_x000D_
select * from employees;_x000D_
_x000D_
Select salary from employees  order by salary;_x000D_
_x000D_
set @rowid=0;_x000D_
set @cnt=(select count(*) from employees);_x000D_
set @middle_no=ceil(@cnt/2);_x000D_
set @odd_even=null;_x000D_
_x000D_
select AVG(salary) from _x000D_
(select salary,@rowid:=@rowid+1 as rid, (CASE WHEN(mod(@cnt,2)=0) THEN @odd_even:=1 ELSE @odd_even:=0 END) as odd_even_status  from employees  order by salary) as tbl where tbl.rid=@middle_no or tbl.rid=(@middle_no+@odd_even);

If you are looking for detailed explanation, please refer this blog.

You can also refactor your code to use a generator. But this may not be a solution for all types of nested loops.

I had a similar problem with Ant build (started by hand from IDEA GUI). In my case there was the right solution to right click on the Ant task, choose properties and set a higher value to "Maximum heap space (Mb):" and "Maximum stack space (Mb):" input fields.

You're trying to do &(2), &(4) which won't work

#romtest {
  .detailed {
    th {
      &:nth-child(2) {//your styles here}
      &:nth-child(4) {//your styles here}
      &:nth-child(6) {//your styles here}
      }
  }
}

Well pandas use bitwise & | and each condition should be wrapped in a ()

For example following works

data_query = data[(data['year'] >= 2005) & (data['year'] <= 2010)]

But the same query without proper brackets does not

data_query = data[(data['year'] >= 2005 & data['year'] <= 2010)]

One line solution:

import os
os.system("wc -l  filename")  

My snippet:

>>> os.system('wc -l *.txt')

0 bar.txt
1000 command.txt
3 test_file.txt
1003 total

First create a real, permanent table as a template that has the required layout for the returned temporary table, using a naming convention that identifies it as a template and links it symbolically to the SP, eg tmp_SPName_Output. This table will never contain any data.

In the SP, use INSERT to load data into a temp table following the same naming convention, e.g. #SPName_Output which is assumed to exist. You can test for its existence and return an error if it does not.

Before calling the sp use this simple select to create the temp table:

SELECT TOP(0) * INTO #SPName_Output FROM tmp_SPName_Output;
EXEC SPName;
-- Now process records in #SPName_Output;

This has these distinct advantages:

• The temp table is local to the current session, unlike ##, so will not clash with concurrent calls to the SP from different sessions. It is also dropped automatically when out of scope.
• The template table is maintained alongside the SP, so if changes are made to the output (new columns added, for example) then pre-existing callers of the SP do not break. The caller does not need to be changed.
• You can define any number of output tables with different naming for one SP and fill them all. You can also define alternative outputs with different naming and have the SP check the existence of the temp tables to see which need to be filled.
• Similarly, if major changes are made but you want to keep backwards compatibility, you can have a new template table and naming for the later version but still support the earlier version by checking which temp table the caller has created.

In PHP 7 you can write it even shorter:

$age = $_GET['age'] ?? 27;

This means that the $age variable will be set to the age parameter if it is provided in the URL, or it will default to 27.

See all new features of PHP 7.

Use React Native Hyperlink (Native <A> tag):

Install:

npm i react-native-a

import:

import A from 'react-native-a'

Usage:

1. <A>Example.com</A>
2. <A href="example.com">Example</A>
3. <A href="https://example.com">Example</A>
4. <A href="example.com" style={{fontWeight: 'bold'}}>Example</A>

This function will be used get the data from url in form of HttpResponse object.

public HttpResponse getRespose(String url, String your_auth_code){
HttpClient client = new DefaultHttpClient();
HttpPost postForGetMethod = new HttpPost(url);
postForGetMethod.addHeader("Content-type", "Application/JSON");
postForGetMethod.addHeader("Authorization", your_auth_code);
return client.execute(postForGetMethod);
}

Above function is called here and we receive a String form of the json using the Apache library Class.And in following statements we try to make simple pojo out of the json we received.

String jsonString     =     
EntityUtils.toString(getResponse("http://echo.jsontest.com/title/ipsum/content/    blah","Your_auth_if_you_need_one").getEntity(), "UTF-8");
final GsonBuilder gsonBuilder = new GsonBuilder();
gsonBuilder.registerTypeAdapter(JsonJavaModel .class, new    CustomJsonDeserialiser());
final Gson gson = gsonBuilder.create();
JsonElement json = new JsonParser().parse(jsonString);
JsonJavaModel pojoModel = gson.fromJson(
                    jsonElementForJavaObject, JsonJavaModel.class);

This is a simple java model class for incomming json. public class JsonJavaModel{ String content; String title; } This is a custom deserialiser:

public class CustomJsonDeserialiserimplements JsonDeserializer<JsonJavaModel>         {

@Override
public JsonJavaModel deserialize(JsonElement json, Type type,
                                 JsonDeserializationContext arg2) throws    JsonParseException {
    final JsonJavaModel jsonJavaModel= new JsonJavaModel();
    JsonObject object = json.getAsJsonObject();

    try {
     jsonJavaModel.content = object.get("Content").getAsString()
     jsonJavaModel.title = object.get("Title").getAsString()

    } catch (Exception e) {

        e.printStackTrace();
    }
    return jsonJavaModel;
}

Include Gson library and org.apache.http.util.EntityUtils;

I know this is particularly old but I would add an answer I believe covers the information missing from the highest voted answer that could be very valuable to any who find this:

For each of the following methods connect them with a count if you need any input to be accepted. (Assuming we are using vocal definitions of integers rather than 0-255, etc.)

x.isdigit() works well for checking if x is an integer.

x.replace('-','').isdigit() works well for checking if x is a negative.(Check - in first position)

x.replace('.','').isdigit() works well for checking if x is a decimal.

x.replace(':','').isdigit() works well for checking if x is a ratio.

x.replace('/','',1).isdigit() works well for checking if x is a fraction.

I had a case very similar where I was posting in an each loop and then setting the html markup in some fields from numbers received from the ajax. I then needed to do a sum of the (now-updated) values of these fields and place in a total field.

Thus the problem was that I was trying to do a sum on all of the numbers but no data had arrived back yet from the async ajax calls. I needed to complete this functionality in a few functions to be able to reuse the code. My outer function awaits the data before I then go and do some stuff with the fully updated DOM.

    // 1st
    function Outer() {
        var deferreds = GetAllData();

        $.when.apply($, deferreds).done(function () {
            // now you can do whatever you want with the updated page
        });
    }

    // 2nd
    function GetAllData() {
        var deferreds = [];
        $('.calculatedField').each(function (data) {
            deferreds.push(GetIndividualData($(this)));
        });
        return deferreds;
    }

    // 3rd
    function GetIndividualData(item) {
        var def = new $.Deferred();
        $.post('@Url.Action("GetData")', function (data) {
            item.html(data.valueFromAjax);
            def.resolve(data);
        });
        return def;
    }

Why don't you style it out:

<canvas id="canvas" width="800" height="600" style="background: url('./images/image.jpg')">
  Your browser does not support the canvas element.
</canvas>

You add your ActionListener twice to button. So correct your code for button2 to

  JButton button2 = new JButton("hello agin2");
  panel.add(button2);
  button2.addActionListener (new Action2());//note the button2 here instead of button

Furthermore, perform your Swing operations on the correct thread by using EventQueue.invokeLater

Got here through google because i was looking for a good way to do things on the ui thread after being inside a Task.Run call - Using the following code you can use await to get back to the UI Thread again.

I hope this helps someone.

public static class UI
{
    public static DispatcherAwaiter Thread => new DispatcherAwaiter();
}

public struct DispatcherAwaiter : INotifyCompletion
{
    public bool IsCompleted => Application.Current.Dispatcher.CheckAccess();

    public void OnCompleted(Action continuation) => Application.Current.Dispatcher.Invoke(continuation);

    public void GetResult() { }

    public DispatcherAwaiter GetAwaiter()
    {
        return this;
    }
}

Usage:

... code which is executed on the background thread...
await UI.Thread;
... code which will be run in the application dispatcher (ui thread) ...

Check this one:

public static void main(String[] args) {
    String input = null;
    int number = 0;
    try {
        BufferedReader bufferedReader = new BufferedReader(new InputStreamReader(System.in));
        input = bufferedReader.readLine();
        number = Integer.parseInt(input);
    } catch (NumberFormatException ex) {
       System.out.println("Not a number !");
    } catch (IOException e) {
        e.printStackTrace();
    }
}

I had the same problem for days until I noticed (how could I look at it and not read the code :-(..) that config.inc.php is calling config-db.php

** MySql Server version: 5.7.5-m15
** Apache/2.4.10 (Ubuntu)
** phpMyAdmin 4.2.9.1deb0.1

/etc/phpmyadmin/config-db.php:

$dbuser='yourDBUserName';
$dbpass='';
$basepath='';
$dbname='phpMyAdminDBName';
$dbserver='';
$dbport='';
$dbtype='mysql';

Here you need to define your username, password, dbname and others that are showing empty' use default unless you changed their configuration. That solved the issue for me.
U hope it helps you.
latest.phpmyadmin.docs

Well, I can't see Tony's solution...so I have to handle it myself...

If you don't need version_key, you can just:

var UserSchema = new mongoose.Schema({
    nickname: String,
    reg_time: {type: Date, default: Date.now}
}, {
    versionKey: false // You should be aware of the outcome after set to false
});

Setting the versionKey to false means the document is no longer versioned.

This is problematic if the document contains an array of subdocuments. One of the subdocuments could be deleted, reducing the size of the array. Later on, another operation could access the subdocument in the array at it's original position.

Since the array is now smaller, it may accidentally access the wrong subdocument in the array.

The versionKey solves this by associating the document with the a versionKey, used by mongoose internally to make sure it accesses the right collection version.

More information can be found at: http://aaronheckmann.blogspot.com/2012/06/mongoose-v3-part-1-versioning.html

Starting with redis 2.6.0, you can run lua scripts, which execute atomically. I have never written one, but I think it would look something like this

EVAL "return redis.call('del', unpack(redis.call('keys', ARGV[1])))" 0 prefix:[YOUR_PREFIX e.g delete_me_*]

Warning: As the Redis document says, because of performance maters, keys command should not use for regular operations in production, this command is intended for debugging and special operations. read more

See the EVAL documentation.

Copying and pasting by user interactions emulation could be not reliable (for example, popup appears and it switches the focus). You may be interested in trying the commercial ByteScout PDF Extractor SDK that is specifically designed to extract data from PDF and it works from VBA. It is also capable of extracting data from invoices and tables as CSV using VB code.

Here is the VBA code for Excel to extract text from given locations and save them into cells in the Sheet1:

Private Sub CommandButton1_Click()

' Create TextExtractor object
' Set extractor = CreateObject("Bytescout.PDFExtractor.TextExtractor")
Dim extractor As New Bytescout_PDFExtractor.TextExtractor

extractor.RegistrationName = "demo"
extractor.RegistrationKey = "demo"

' Load sample PDF document
extractor.LoadDocumentFromFile ("c:\sample1.pdf")

' Get page count
pageCount = extractor.GetPageCount()

Dim wb As Workbook
Dim ws As Worksheet
Dim TxtRng  As Range

Set wb = ActiveWorkbook
Set ws = wb.Sheets("Sheet1")

For i = 0 To pageCount - 1
            RectLeft = 10
            RectTop = 10
            RectWidth = 100
            RectHeight = 100

            ' check the same text is extracted from returned coordinates
            extractor.SetExtractionArea RectLeft, RectTop, RectWidth, RectHeight
            ' extract text from given area
            extractedText = extractor.GetTextFromPage(i)

            ' insert rows
            ' Rows(1).Insert shift:=xlShiftDown
            ' write cell value
             Set TxtRng = ws.Range("A" & CStr(i + 2))
             TxtRng.Value = extractedText

Next

Set extractor = Nothing


End Sub

Disclosure: I am related to ByteScout

Here's an example that will center the content within the parent div. This also makes sure the overlay starts at the edge of the video, even when centered.

<div class="outer-container">
    <div class="inner-container">
        <div class="video-overlay">Bug Buck Bunny - Trailer</div>
        <video id="player" src="http://video.webmfiles.org/big-buck-bunny_trailer.webm" controls autoplay loop></video>
    </div>
</div>

with css as

.outer-container {
    border: 1px dotted black;
    width: 100%;
    height: 100%;
    text-align: center;
}
.inner-container {
    border: 1px solid black;
    display: inline-block;
    position: relative;
}
.video-overlay {
    position: absolute;
    left: 0px;
    top: 0px;
    margin: 10px;
    padding: 5px 5px;
    font-size: 20px;
    font-family: Helvetica;
    color: #FFF;
    background-color: rgba(50, 50, 50, 0.3);
}
video {
    width: 100%;
    height: 100%;
}

here's the jsfiddle https://jsfiddle.net/dyrepk2x/2/

Hope that helps :)

If you don't want to jQuery, here's the vanilla JavaScript:

///Mute
var video = document.getElementById("your-video-id");
video.muted= true;

//Unmute
var video = document.getElementById("your-video-id");
video.muted= false;

It will work for audio too, just put the element's id and it will work (and change the var name if you want, to 'media' or something suited for both audio/video as you like).

also it should be noted that turning on HttpOnly will break applets that require stateful access back to the jvm.

the Applet http requests will not use the jsessionid cookie and may get assigned to a different tomcat.

DEMO : http://jsfiddle.net/shfj70qp/

//dd/mm/yyyy 

var date = new Date();
var month = date.getMonth();
var day = date.getDate();
var year = date.getFullYear();

console.log(month+"/"+day+"/"+year);

Yes, Java doesn't have struct/value type yet. But, in the upcoming version of Java, we are going to get inline class which is similar to struct in C# and will help us write allocation free code.

inline class point { 
  int x;
  int y;
}

I had to do something like this but wanted to use a getter/setter for mine. In particular I wanted to return a long from a textfield. The other answers all worked well also, I just ended up adapting mine a little as my school project evolved.

long ms = [self.textfield.text longLongValue];
return ms;

I was in a predicament where I had a signed byte array (sbyte[]) as input to a Test class and I wanted to replace it with a normal byte array (byte[]) for simplicity. I arrived here from a Google search but Tom's answer wasn't useful to me.

I wrote a helper method to print out the initializer of a given byte[]:

public void PrintByteArray(byte[] bytes)
{
    var sb = new StringBuilder("new byte[] { ");
    foreach (var b in bytes)
    {
        sb.Append(b + ", ");
    }
    sb.Append("}");
    Console.WriteLine(sb.ToString());
}

You can use it like this:

var signedBytes = new sbyte[] { 1, 2, 3, -1, -2, -3, 127, -128, 0, };
var unsignedBytes = UnsignedBytesFromSignedBytes(signedBytes);
PrintByteArray(unsignedBytes);
// output:
// new byte[] { 1, 2, 3, 255, 254, 253, 127, 128, 0, }

The ouput is valid C# which can then just be copied into your code.

And just for completeness, here is the UnsignedBytesFromSignedBytes method:

// http://stackoverflow.com/a/829994/346561
public static byte[] UnsignedBytesFromSignedBytes(sbyte[] signed)
{
    var unsigned = new byte[signed.Length];
    Buffer.BlockCopy(signed, 0, unsigned, 0, signed.Length);
    return unsigned;
}

This is Similar to what Meritt has posted earlier. just posting the complete code

    string sJSON;
    Dictionary<string, string> aa1 = new Dictionary<string, string>();
    aa1.Add("one", "1"); aa1.Add("two", "2"); aa1.Add("three", "3");
    Console.Write("JSON form of Person object: ");

    sJSON = WriteFromObject(aa1);
    Console.WriteLine(sJSON);

    Dictionary<string, string> aaret = new Dictionary<string, string>();
    aaret = ReadToObject<Dictionary<string, string>>(sJSON);

    public static string WriteFromObject(object obj)
    {            
        byte[] json;
            //Create a stream to serialize the object to.  
        using (MemoryStream ms = new MemoryStream())
        {                
            // Serializer the object to the stream.  
            DataContractJsonSerializer ser = new DataContractJsonSerializer(obj.GetType());
            ser.WriteObject(ms, obj);
            json = ms.ToArray();
            ms.Close();
        }
        return Encoding.UTF8.GetString(json, 0, json.Length);

    }

    // Deserialize a JSON stream to object.  
    public static T ReadToObject<T>(string json) where T : class, new()
    {
        T deserializedObject = new T();
        using (MemoryStream ms = new MemoryStream(Encoding.UTF8.GetBytes(json)))
        {

            DataContractJsonSerializer ser = new DataContractJsonSerializer(deserializedObject.GetType());
            deserializedObject = ser.ReadObject(ms) as T;
            ms.Close();
        }
        return deserializedObject;
    }

<video id="myvideo">
  <source src="path/to/movie.mp4" />
</video>

<p onclick="toggleControls();">Toggle</p>

<script>
var video = document.getElementById("myvideo");

function toggleControls() {
  if (video.hasAttribute("controls")) {
     video.removeAttribute("controls")   
  } else {
     video.setAttribute("controls","controls")   
  }
}
</script>

See it working on jsFiddle: http://jsfiddle.net/dgLds/

As others have said, plt.savefig() or fig1.savefig() is indeed the way to save an image.

However I've found that in certain cases the figure is always shown. (eg. with Spyder having plt.ion(): interactive mode = On.) I work around this by forcing the closing of the figure window in my giant loop with plt.close(figure_object) (see documentation), so I don't have a million open figures during the loop:

import matplotlib.pyplot as plt
fig, ax = plt.subplots( nrows=1, ncols=1 )  # create figure & 1 axis
ax.plot([0,1,2], [10,20,3])
fig.savefig('path/to/save/image/to.png')   # save the figure to file
plt.close(fig)    # close the figure window

You should be able to re-open the figure later if needed to with fig.show() (didn't test myself).

Here's how you can do that (quick and dirty solution. If you really need this kind of behavior, you should either reconsider your design or override all IList<T> members and aggregate the source list):

using System;
using System.Collections.Generic;

namespace ConsoleApplication3
{
    public class ModifiableList<T> : List<T>
    {
        private readonly IList<T> pendingAdditions = new List<T>();
        private int activeEnumerators = 0;

        public ModifiableList(IEnumerable<T> collection) : base(collection)
        {
        }

        public ModifiableList()
        {
        }

        public new void Add(T t)
        {
            if(activeEnumerators == 0)
                base.Add(t);
            else
                pendingAdditions.Add(t);
        }

        public new IEnumerator<T> GetEnumerator()
        {
            ++activeEnumerators;

            foreach(T t in ((IList<T>)this))
                yield return t;

            --activeEnumerators;

            AddRange(pendingAdditions);
            pendingAdditions.Clear();
        }
    }

    class Program
    {
        static void Main(string[] args)
        {
            ModifiableList<int> ints = new ModifiableList<int>(new int[] { 2, 4, 6, 8 });

            foreach(int i in ints)
                ints.Add(i * 2);

            foreach(int i in ints)
                Console.WriteLine(i * 2);
        }
    }
}

UPDATE R 
SET R.status = '0' 
FROM dbo.ProductReviews AS R
INNER JOIN dbo.products AS P 
       ON R.pid = P.id 
WHERE R.id = '17190' 
  AND P.shopkeeper = '89137';

you can't access your drawables via a path, so if you want a human readable interface with your drawables that you can build programatically.

declare a HashMap somewhere in your class:

private static HashMap<String, Integer> images = null;

//Then initialize it in your constructor:

public myClass() {
  if (images == null) {
    images = new HashMap<String, Integer>();
    images.put("Human1Arm", R.drawable.human_one_arm);
    // for all your images - don't worry, this is really fast and will only happen once
  }
}

Now for access -

String drawable = "wrench";
// fill in this value however you want, but in the end you want Human1Arm etc
// access is fast and easy:
Bitmap wrench = BitmapFactory.decodeResource(getResources(), images.get(drawable));
canvas.drawColor(Color .BLACK);
Log.d("OLOLOLO",Integer.toString(wrench.getHeight()));
canvas.drawBitmap(wrench, left, top, null);

I've been looking into this problem further, and you simply need to grab all the appropriate DLL's from the same downloaded version of ODP.Net and put them in the same folder as your Exe file, because ODP.Net is fussy about not mixing version numbers.

I've explained how to do this here: http://splinter.com.au/using-the-new-odpnet-to-access-oracle-from-c Here's the gist of it though:

• Download ODP.Net
• Unzip the file
• Unzip all the JAR's in it
• Grab these dll's that were just unzipped:
  • oci.dll (renamed from 'oci.dll.dbl')
  • Oracle.DataAccess.dll
  • oraociicus11.dll
  • OraOps11w.dll
  • orannzsbb11.dll
  • oraocci11.dll
  • ociw32.dll (renamed from 'ociw32.dll.dbl')
• Put all the DLLs in the same folder as your C# Executable

With SQL Developer you should also find it without writing any query. Right click on your Connection/Propriety.

You should see the name on the left under something like "connection details" and should look like "Connectionname@servicename", or on the right, under the connection's details.

As others have mentioned, there is no official Go construct for this. The closest I can imagine would be a function that returns a slice. In this way, you can guarantee that no one will manipulate the elements of the original slice (as it is "hard-coded" into the array).

I have shortened your slice to make it...shorter...:

func GetLetterGoodness() []float32 {
    return []float32 { .0817,.0149,.0278,.0425,.1270,.0223 }
}

I wrote with parameters that are predefined

They are not "predefined" logically, somewhere inside your code. But as arguments of SP they have no default values and are required. To avoid passing those params explicitly you have to define default values in SP definition:

Alter Procedure [Test]
    @StartDate AS varchar(6) = NULL, 
    @EndDate AS varchar(6) = NULL
AS
...

NULLs or empty strings or something more sensible - up to you. It does not matter since you are overwriting values of those arguments in the first lines of SP.

Now you can call it without passing any arguments e.g. exec dbo.TEST

For-loops:

For-loop in C:

for(int x = 0; x<=3; x++)
{
    //Do something!
}

The same loop in 8086 assembler:

        xor cx,cx   ; cx-register is the counter, set to 0
loop1   nop         ; Whatever you wanna do goes here, should not change cx
        inc cx      ; Increment
        cmp cx,3    ; Compare cx to the limit
        jle loop1   ; Loop while less or equal

That is the loop if you need to access your index (cx). If you just wanna to something 0-3=4 times but you do not need the index, this would be easier:

        mov cx,4    ; 4 iterations
loop1   nop         ; Whatever you wanna do goes here, should not change cx
        loop loop1  ; loop instruction decrements cx and jumps to label if not 0

If you just want to perform a very simple instruction a constant amount of times, you could also use an assembler-directive which will just hardcore that instruction

times 4 nop

Do-while-loops

Do-while-loop in C:

int x=1;
do{
    //Do something!
}
while(x==1)

The same loop in assembler:

        mov ax,1
loop1   nop         ; Whatever you wanna do goes here
        cmp ax,1    ; Check wether cx is 1
        je loop1    ; And loop if equal

While-loops

While-loop in C:

while(x==1){
    //Do something
}

The same loop in assembler:

        jmp loop1   ; Jump to condition first
cloop1  nop         ; Execute the content of the loop
loop1   cmp ax,1    ; Check the condition
        je cloop1   ; Jump to content of the loop if met

For the for-loops you should take the cx-register because it is pretty much standard. For the other loop conditions you can take a register of your liking. Of course replace the no-operation instruction with all the instructions you wanna perform in the loop.

Write one table per join, like this:

select tab1.a,tab2.b,tab3.c,tab4.d 
from 
  table1 tab1
  inner join table2 tab2 on tab2.fg = tab1.fg
  left join table3 tab3 on tab3.xxx = tab1.xxx and tab3.desc = "XYZ"
  left join table4 tab4 on tab4.xya = tab3.xya and tab4.ss = tab3.ss
  left join table5 tab5 on tab5.dd = tab3.dd and tab5.kk = tab4.kk

Note that while my query contains actual left join, your query apparently doesn't. Since the conditions are in the where, your query should behave like inner joins. (Although I admit I don't know Informix, so maybe I'm wrong there).

The specfific Informix extension used in the question works a bit differently with regards to left joins. Apart from the exact syntax of the join itself, this is mainly in the fact that in Informix, you can specify a list of outer joined tables. These will be left outer joined, and the join conditions can be put in the where clause. Note that this is a specific extension to SQL. Informix also supports 'normal' left joins, but you can't combine the two in one query, it seems.

In Oracle this extension doesn't exist, and you can't put outer join conditions in the where clause, since the conditions will be executed regardless.

So look what happens when you move conditions to the where clause:

select tab1.a,tab2.b,tab3.c,tab4.d 
from 
  table1 tab1
  inner join table2 tab2 on tab2.fg = tab1.fg
  left join table3 tab3 on tab3.xxx = tab1.xxx
  left join table4 tab4 on tab4.xya = tab3.xya
  left join table5 tab5 on tab5.dd = tab3.dd and tab5.kk = tab4.kk
where
  tab3.desc = "XYZ" and
  tab4.ss = tab3.ss

Now, only rows will be returned for which those two conditions are true. They cannot be true when no row is found, so if there is no matching row in table3 and/or table4, or if ss is null in either of the two, one of these conditions is going to return false, and no row is returned. This effectively changed your outer join to an inner join, and as such changes the behavior significantly.

PS: left join and left outer join are the same. It means that you optionally join the second table to the first (the left one). Rows are returned if there is only data in the 'left' part of the join. In Oracle you can also right [outer] join to make not the left, but the right table the leading table. And there is and even full [outer] join to return a row if there is data in either table.

How did you pass object to method?

Are you doing new inside that method for object? If so, you have to use ref in method.

Following link give you better idea.

http://dotnetstep.blogspot.com/2008/09/passing-reference-type-byval-or-byref.html

You are just returning a memory address, it's allowed but probably an error.

Yes if you try to dereference that memory address you will have undefined behavior.

int * ref () {

 int tmp = 100;
 return &tmp;
}

int main () {

 int * a = ref();
 //Up until this point there is defined results
 //You can even print the address returned
 // but yes probably a bug

 cout << *a << endl;//Undefined results
}

If anyone is looking for in Kotlin

    val  uri = "tel:+800******"
    val call_customer_service = Intent(Intent.ACTION_CALL)
    call_customer_service.setData(Uri.parse(uri))
    startActivity(call_customer_service)

Like some other solutions it requires android.permission.CALL_PHONE permission.

I did it using this command:

syntax: adb push filename.extension /sdcard/0/

example: adb push UPDATE-SuperSU-v2.01.zip /sdcard/0/

Static classes can be useful in certain situations, but there is a potential to abuse and/or overuse them, like most language features.

As Dylan Smith already mentioned, the most obvious case for using a static class is if you have a class with only static methods. There is no point in allowing developers to instantiate such a class.

The caveat is that an overabundance of static methods may itself indicate a flaw in your design strategy. I find that when you are creating a static function, its a good to ask yourself -- would it be better suited as either a) an instance method, or b) an extension method to an interface. The idea here is that object behaviors are usually associated with object state, meaning the behavior should belong to the object. By using a static function you are implying that the behavior shouldn't belong to any particular object.

Polymorphic and interface driven design are hindered by overusing static functions -- they cannot be overriden in derived classes nor can they be attached to an interface. Its usually better to have your 'helper' functions tied to an interface via an extension method such that all instances of the interface have access to that shared 'helper' functionality.

One situation where static functions are definitely useful, in my opinion, is in creating a .Create() or .New() method to implement logic for object creation, for instance when you want to proxy the object being created,

public class Foo
{
    public static Foo New(string fooString)
    {
        ProxyGenerator generator = new ProxyGenerator();

        return (Foo)generator.CreateClassProxy
             (typeof(Foo), new object[] { fooString }, new Interceptor()); 
    }

This can be used with a proxying framework (like Castle Dynamic Proxy) where you want to intercept / inject functionality into an object, based on say, certain attributes assigned to its methods. The overall idea is that you need a special constructor because technically you are creating a copy of the original instance with special added functionality.

If you insist on having this trivial function in pure batch I suggest this:

@echo off

set x=somestring
set n=0
set m=255

:loop
if "!x:~%m%,1!" == "" (
    set /a "m>>=1"
    goto loop
) else (
    set /a n+=%m%+1
    set x=!x:~%m%!
    set x=!x:~1!
    if not "!x!" == "" goto loop
)

echo %n%

PS. You must have delayed variable expansion enabled to run this.

EDIT. Now I have made an improved version:

@echo off

set x=somestring
set n=0

for %%m in (4095 2047 1023 511 255 127 63 31 15 7 3 1 0) do (
    if not "!x:~%%m,1!" == "" (
        set /a n+=%%m+1
        set x=!x:~%%m!
        set x=!x:~1!
        if "!x!" == "" goto done
    )
)

:done
echo %n%

EDIT2. If you have a C compiler or something on your system you can create the programs you need and miss on the fly if they don't exist. This method is very general. Take string length as an example:

@echo off

set x=somestring

if exist strlen.exe goto comp
echo #include "string.h" > strlen.c
echo int main(int argc, char* argv[]) { return strlen(argv[1]); } >> strlen.c
CL strlen.c 

:comp
strlen "%x%"
set n=%errorlevel%
echo %n%

You have to set up PATH, INCLUDE and LIB appropriately. This too can be done on the fly from the batch script. Even if you don't know whether you've got a compiler or don't know where it is you can search for it in your script.

If you can't get anything else to work, open an interpreter in whichever version you choose (I prefer using iPython) and:

import subprocess

subprocess.call('python script.py -flags')

This uses whichever python version you are currently operating under. Works fine for a single script, but will quickly get out of hand if there are lots of scripts you run, in which case you can always make a batch file with all of these calls inside. Not the most elegant answer, but it works.

Is there a way to make aliases for different python version a la Linux?

This runs fine on Java 1.6

~ % javac RemoveListElementDemo.java
~ % java RemoveListElementDemo
~ % cat RemoveListElementDemo.java

import java.util.*;
public class RemoveListElementDemo {    
    private static final List<Integer> integerList;

    static {
        integerList = new ArrayList<Integer>();
        integerList.add(1);
        integerList.add(2);
        integerList.add(3);
    }

    public static void remove(Integer remove) {
        for(Integer integer : integerList) {
            if(integer.equals(remove)) {                
                integerList.remove(integer);
            }
        }
    }

    public static void main(String... args) {                
        remove(Integer.valueOf(2));

        Integer remove = Integer.valueOf(3);
        for(Integer integer : integerList) {
            if(integer.equals(remove)) {                
                integerList.remove(integer);
            }
        }
    }
}

~ %

decodeURI(window.location.search)
  .replace('?', '')
  .split('&')
  .map(param => param.split('='))
  .reduce((values, [ key, value ]) => {
    values[ key ] = value
    return values
  }, {})

You can't easily do this in a generic way: you can only convert an integer to a specific type of enum. As Nicholas has shown, this is a trivial cast if you only care about one kind of enum, but if you want to write a generic method that can handle different kinds of enums, things get a bit more complicated. You want a method along the lines of:

public static string GetEnumDescription<TEnum>(int value)
{
  return GetEnumDescription((Enum)((TEnum)value));  // error!
}

but this results in a compiler error that "int can't be converted to TEnum" (and if you work around this, that "TEnum can't be converted to Enum"). So you need to fool the compiler by inserting casts to object:

public static string GetEnumDescription<TEnum>(int value)
{
  return GetEnumDescription((Enum)(object)((TEnum)(object)value));  // ugly, but works
}

You can now call this to get a description for whatever type of enum is at hand:

GetEnumDescription<MyEnum>(1);
GetEnumDescription<YourEnum>(2);

If you are getting errors even after downloading the newest SDK and Android Studio, here is what I did:

1. Download the most recent SDK
2. Open file-Project structure (Ctrl + Alt + Shift + S)
3. In modules, select app
4. In the properties tab: Change compile SDK version to API 23 Android 6.0 marshmallow (latest)

I hope it helps someone so that he won't suffer like I did for these couple of days.

How about just a simple reset button?

<form>

  <input type="text" id="textfield1" size="5">
  <input type="text" id="textfield2" size="5">

  <input type="reset" value="Reset">

</form>

Here is a solution :

img {
   width: 100%;
   height: auto;
   object-fit: cover;
}

This will make sure the image always covers the entire parent (scaling down and up) and keeps the same aspect ratio.

The REST API of Instagram has been discontinued. But you can use GraphQL to get the desired data. Here you can find an overview: https://developers.facebook.com/docs/instagram-api

One of the solution is using the permutation to pre-compute all the permutations and stored in the ArrayList

Java 8 introduced a new method, ints(), in the java.util.Random class. The ints() method returns an unlimited stream of pseudorandom int values. You can limit the random numbers between a specified range by providing the minimum and the maximum values.

Random genRandom = new Random();
int num = genRandom.nextInt(arr.length);

With the help of generating the random number, You can iterate through the loop and swap with the current index with the random number.. That's how you can generate a random number with O(1) space complexity.

If you want to keep the constants in the React component, use statics property, like the example below. Otherwise, use the answer given by @Jim

var MyComponent = React.createClass({
    statics: {
        sizeToLetterMap: {
            small_square: 's',
            large_square: 'q',
            thumbnail: 't',
            small_240: 'm',
            small_320: 'n',
            medium_640: 'z',
            medium_800: 'c',
            large_1024: 'b',
            large_1600: 'h',
            large_2048: 'k',
            original: 'o'
        },
        someOtherStatic: 100
    },

    photoUrl: function (image, size_text) {
        var size = MyComponent.sizeToLetterMap[size_text];
    }

Try this:

app.component.ts

import {Component, OnInit, OnDestroy} from '@angular/core';
import {Router, NavigationEnd} from '@angular/router';
import {filter} from 'rxjs/operators';
import {Subscription} from 'rxjs';

@Component({
    selector: 'app-root',
    templateUrl: './app.component.html',
    styleUrls: ['./app.component.scss'],
})
export class AppComponent implements OnInit, OnDestroy {
    subscription: Subscription;

    constructor(private router: Router) {
    }

    ngOnInit() {
        this.subscription = this.router.events.pipe(
            filter(event => event instanceof NavigationEnd)
        ).subscribe(() => window.scrollTo(0, 0));
    }

    ngOnDestroy() {
        this.subscription.unsubscribe();
    }
}

This is working for me: Let's say I have this dependency

<dependency>
    <groupId>com.company.app</groupId>
    <artifactId>my-library</artifactId>
    <version>1.0</version>
    <scope>system</scope>
    <systemPath>${project.basedir}/lib/my-library.jar</systemPath>
</dependency>

Then, add the class-path for your system dependency manually like this

<Class-Path>libs/my-library-1.0.jar</Class-Path>

Full config:

<plugin>
    <groupId>org.apache.maven.plugins</groupId>
    <artifactId>maven-jar-plugin</artifactId>
    <version>2.4</version>
    <configuration>
        <archive>
            <manifestEntries>
                <Build-Jdk>${jdk.version}</Build-Jdk>
                <Implementation-Title>${project.name}</Implementation-Title>
                <Implementation-Version>${project.version}</Implementation-Version>
                <Specification-Title>${project.name} Library</Specification-Title>
                <Specification-Version>${project.version}</Specification-Version>
                <Class-Path>libs/my-library-1.0.jar</Class-Path>
            </manifestEntries>
            <manifest>
                <addClasspath>true</addClasspath>
                <mainClass>com.company.app.MainClass</mainClass>
                <classpathPrefix>libs/</classpathPrefix>
            </manifest>
        </archive>
    </configuration>
</plugin>
<plugin>
    <groupId>org.apache.maven.plugins</groupId>
    <artifactId>maven-dependency-plugin</artifactId>
    <version>2.5.1</version>
    <executions>
        <execution>
            <id>copy-dependencies</id>
            <phase>package</phase>
            <goals>
                <goal>copy-dependencies</goal>
            </goals>
            <configuration>
                <outputDirectory>${project.build.directory}/libs/</outputDirectory>
            </configuration>
        </execution>
    </executions>
</plugin>

I think the 2 sets of brackets makes it a bit confusing but I saw another usage in googles example, they used something similar, I hope this will help you understand better:

var app = window.app || (window.app = {});
console.log(app);
console.log(window.app);

so if windows.app is not defined, then window.app = {} is immediately executed, so window.app is assigned with {} during the condition evaluation, so the result is both app and window.app now become {}, so console output is:

Object {}
Object {}

Note: The answer below was written in 2010. Here many years later, both keyCode and which are deprecated in favor of key (for the logical key) and code (for the physical placement of the key). But note that IE doesn't support code, and its support for key is based on an older version of the spec so isn't quite correct. As I write this, the current Edge based on EdgeHTML and Chakra doesn't support code either, but Microsoft is rolling out its Blink- and V8- based replacement for Edge, which presumably does/will.

Some browsers use keyCode, others use which.

If you're using jQuery, you can reliably use which as jQuery standardizes things; More here.

If you're not using jQuery, you can do this:

var key = 'which' in e ? e.which : e.keyCode;

Or alternatively:

var key = e.which || e.keyCode || 0;

...which handles the possibility that e.which might be 0 (by restoring that 0 at the end, using JavaScript's curiously-powerful || operator).

Have you tried by setting the MIME type of your .m4v to "video/m4v" or "video/x-m4v" ?

Browsers might use the canPlayType method internally to check if a <source> is candidate to playback.

In Chrome, I have these results:

document.createElement("video").canPlayType("video/mp4"); // "maybe"
document.createElement("video").canPlayType("video/m4v"); // ""
document.createElement("video").canPlayType("video/x-m4v"); // "maybe"

redirect_to new_user_path(:id => 1, :contact_id => 3, :name => 'suleman')

Use pass for no-op:

if x == 0:
  pass
else:
  print "x not equal 0"

And here's another example:

def f():
  pass

Or:

class c:
  pass

I just did this

sudo a2enmod rewrite

then you have to restart the apache service by following command

sudo service apache2 restart

I have had good results with using a FORM tag since it works everywhere and you don't have to create temporarily files on server. The method works like this.

On the client side (page HTML) you create an invisible form like this

<form method="POST" action="/download.php" target="_blank" id="downloadForm">
    <input type="hidden" name="data" id="csv">
</form>

Then you add this Javascript code to your button:

$('#button').click(function() {
     $('#csv').val('---your data---');
     $('#downloadForm').submit();
}

The on the server-side you have the following PHP code in download.php:

<?php
header('Content-Type: text/csv');
header('Content-Description: File Transfer');
header('Content-Type: application/octet-stream');
header('Content-Disposition: attachment; filename=out.csv');
header('Content-Transfer-Encoding: binary');
header('Connection: Keep-Alive');
header('Expires: 0');
header('Cache-Control: must-revalidate, post-check=0, pre-check=0');
header('Pragma: public');
header('Content-Length: ' . strlen($data));

echo $_REQUEST['data'];
exit();

You can even create zip files of your data like this:

<?php

$file = tempnam("tmp", "zip");

$zip = new ZipArchive();
$zip->open($file, ZipArchive::OVERWRITE);
$zip->addFromString('test.csv', $_REQUEST['data']);
$zip->close();

header('Content-Type: application/zip');
header('Content-Length: ' . filesize($file));
header('Content-Disposition: attachment; filename="file.zip"');
readfile($file);
unlink($file); 

The best part is it does not leave any residual files on your server since everything is created and destroyed on the fly!

I had the same issue and i fixed it with the following:

The problem is that when you specify a file that only your app has access to (e.g. by calling getFileStreamPath("file");)

That is why i just made sure that the given file really exists and that EVERYONE has write access to it.

Intent intent = new Intent(android.provider.MediaStore.ACTION_IMAGE_CAPTURE);
File outFile = getFileStreamPath(Config.IMAGE_FILENAME);
outFile.createNewFile();
outFile.setWritable(true, false);
intent.putExtra(android.provider.MediaStore.EXTRA_OUTPUT,Uri.fromFile(outFile));
startActivityForResult(intent, 2);

This way, the camera app has write access to the given Uri and the OK button works fine :)

To set Maven Proxy :

Edit the proxies session in your ~/.m2/settings.xml file. If you cant find the file, create one.

<settings>
<proxies>
    <proxy>
        <id>httpproxy</id>
        <active>true</active>
        <protocol>http</protocol>
        <host>your-proxy-host</host>
        <port>your-proxy-port</port>
        <nonProxyHosts>local.net|some.host.com</nonProxyHosts>
    </proxy>
<proxy>
        <id>httpsproxy</id>
        <active>true</active>
        <protocol>https</protocol>
        <host>your-proxy-host</host>
        <port>your-proxy-port</port>
        <nonProxyHosts>local.net|some.host.com</nonProxyHosts>
    </proxy>

</proxies>
</settings>

or

Edit the proxies session in your {M2_HOME}/conf/settings.xml

Hope it Helps.. :)

Not sure it stands for anything special. It's just a convention that you supply an 'all' rule, and generally it's used to list all the sub-targets needed to build the entire project, hence the name 'all'. The only thing special about it is that often times people will put it in as the first target in the makefile, which means that just typing 'make' alone will do the same thing as 'make all'.

I'd probably use all.equal and which to get the information you want. It's not recommended to use all.equal in an if...else block for some reason, so we wrap it in isTRUE(). See ?all.equal for more:

foo <- function(A,B){
  if (!isTRUE(all.equal(A,B))){
    mismatches <- paste(which(A != B), collapse = ",")
    stop("error the A and B does not match at the following columns: ", mismatches )
  } else {
    message("Yahtzee!")
  }
}

And in use:

> foo(A,A)
Yahtzee!
> foo(A,B)
Yahtzee!
> foo(A,C)
Error in foo(A, C) : 
  error the A and B does not match at the following columns: 2,4

select count(*) from YourTable

My fix to this problem was to ensure I used the full path for all files names in the ps1 file.

You can use :nth-last-child(); in fact, besides :nth-last-of-type() I don't know what else you could use. I'm not sure what you mean by "dynamic", but if you mean whether the style applies to the new second last child when more children are added to the list, yes it will. Interactive fiddle.

ul li:nth-last-child(2)

Slightly shorter version, without unnecessary second variable:

$csv = <<<'ENDLIST'
"12345","Computers","Acer","4","Varta","5.93","1","0.04","27-05-2013"
"12346","Computers","Acer","5","Decra","5.94","1","0.04","27-05-2013"
ENDLIST;

$arr = explode("\n", $csv);
foreach ($arr as &$line) {
  $line = str_getcsv($line);
}