It took me a while to understand @user1996230's answer so I decided to provide a more explicit example. In the below example I make a proxy for an object loaded in another AppDomain and call a method on that object from another domain.

class ProxyObject : MarshalByRefObject
{
    private Type _type;
    private Object _object;

    public void InstantiateObject(string AssemblyPath, string typeName, object[] args)
    {
        assembly = Assembly.LoadFrom(AppDomain.CurrentDomain.BaseDirectory + AssemblyPath); //LoadFrom loads dependent DLLs (assuming they are in the app domain's base directory
        _type = assembly.GetType(typeName);
        _object = Activator.CreateInstance(_type, args); ;
    }

    public void InvokeMethod(string methodName, object[] args)
    {
        var methodinfo = _type.GetMethod(methodName);
        methodinfo.Invoke(_object, args);
    }
}

static void Main(string[] args)
{
    AppDomainSetup setup = new AppDomainSetup();
    setup.ApplicationBase = @"SomePathWithDLLs";
    AppDomain domain = AppDomain.CreateDomain("MyDomain", null, setup);
    ProxyObject proxyObject = (ProxyObject)domain.CreateInstanceFromAndUnwrap(typeof(ProxyObject).Assembly.Location,"ProxyObject");
    proxyObject.InstantiateObject("SomeDLL","SomeType", new object[] { "someArgs});
    proxyObject.InvokeMethod("foo",new object[] { "bar"});
}

In general, you need to use FormatMessage to convert from a Win32 error code to text.

From the MSDN documentation:

Formats a message string. The function requires a message definition as input. The message definition can come from a buffer passed into the function. It can come from a message table resource in an already-loaded module. Or the caller can ask the function to search the system's message table resource(s) for the message definition. The function finds the message definition in a message table resource based on a message identifier and a language identifier. The function copies the formatted message text to an output buffer, processing any embedded insert sequences if requested.

The declaration of FormatMessage:

DWORD WINAPI FormatMessage(
  __in      DWORD dwFlags,
  __in_opt  LPCVOID lpSource,
  __in      DWORD dwMessageId, // your error code
  __in      DWORD dwLanguageId,
  __out     LPTSTR lpBuffer,
  __in      DWORD nSize,
  __in_opt  va_list *Arguments
);

You can use the build job step from Jenkins Pipeline (Minimum Jenkins requirement: 2.130).

Here's the full API for the build step: https://jenkins.io/doc/pipeline/steps/pipeline-build-step/

How to use build:

• job: Name of a downstream job to build. May be another Pipeline job, but more commonly a freestyle or other project.
  • Use a simple name if the job is in the same folder as this upstream Pipeline job;
  • You can instead use relative paths like ../sister-folder/downstream
  • Or you can use absolute paths like /top-level-folder/nested-folder/downstream

Trigger another job using a branch as a param

At my company many of our branches include "/". You must replace any instances of "/" with "%2F" (as it appears in the URL of the job).

In this example we're using relative paths

    stage('Trigger Branch Build') {
        steps {
            script {
                    echo "Triggering job for branch ${env.BRANCH_NAME}"
                    BRANCH_TO_TAG=env.BRANCH_NAME.replace("/","%2F")
                    build job: "../my-relative-job/${BRANCH_TO_TAG}", wait: false
            }
        }
    }

Trigger another job using build number as a param

build job: 'your-job-name', 
    parameters: [
        string(name: 'passed_build_number_param', value: String.valueOf(BUILD_NUMBER)),
        string(name: 'complex_param', value: 'prefix-' + String.valueOf(BUILD_NUMBER))
    ]

Trigger many jobs in parallel

Source: https://jenkins.io/blog/2017/01/19/converting-conditional-to-pipeline/

More info on Parallel here: https://jenkins.io/doc/book/pipeline/syntax/#parallel

    stage ('Trigger Builds In Parallel') {
        steps {
            // Freestyle build trigger calls a list of jobs
            // Pipeline build() step only calls one job
            // To run all three jobs in parallel, we use "parallel" step
            // https://jenkins.io/doc/pipeline/examples/#jobs-in-parallel
            parallel (
                linux: {
                    build job: 'full-build-linux', parameters: [string(name: 'GIT_BRANCH_NAME', value: env.BRANCH_NAME)]
                },
                mac: {
                    build job: 'full-build-mac', parameters: [string(name: 'GIT_BRANCH_NAME', value: env.BRANCH_NAME)]
                },
                windows: {
                    build job: 'full-build-windows', parameters: [string(name: 'GIT_BRANCH_NAME', value: env.BRANCH_NAME)]
                },
                failFast: false)
        }
    }

Or alternatively:

    stage('Build A and B') {
            failFast true
            parallel {
                stage('Build A') {
                    steps {
                            build job: "/project/A/${env.BRANCH}", wait: true
                    }
                }
                stage('Build B') {
                    steps {
                            build job: "/project/B/${env.BRANCH}", wait: true
                    }
                }
            }
    }

Whenever I see addClass and removeClass I think why not just use toggleClass. In this case we can remove the .clickable class to avoid event bubbling, and to avoid the event from being fired on everything we click inside of the .clickable div.

$(document).on("click", ".close_button", function () { 
    $(this).closest(".grown").toggleClass("spot grown clickable");
});  

$(document).on("click", ".clickable", function () {
    $(this).toggleClass("spot grown clickable");
}); 

I also recommend a parent wrapper for your .clickable divs instead of using the document. I am not sure how you are adding them dynamically so didn't want to assume your layout for you.

http://jsfiddle.net/bplumb/ECQg5/2/

Happy Coding :)

For Angular 5 and above, we can use HttpInterceptor for generalizing the request and response operations. This helps us avoid duplicating:

1) Common headers

2) Specifying response type

3) Querying request

import { Injectable } from '@angular/core';
import {
  HttpRequest,
  HttpHandler,
  HttpEvent,
  HttpInterceptor,
  HttpResponse,
  HttpErrorResponse
} from '@angular/common/http';
import { Observable } from 'rxjs/Observable';
import 'rxjs/add/operator/do';

@Injectable()
export class AuthHttpInterceptor implements HttpInterceptor {

  requestCounter: number = 0;
  constructor() {
  }

  intercept(request: HttpRequest<any>, next: HttpHandler): Observable<HttpEvent<any>> {

    request = request.clone({
      responseType: 'json',
      setHeaders: {
        Authorization: `Bearer token_value`,
        'Content-Type': 'application/x-www-form-urlencoded; charset=UTF-8'
      }
    });

    return next.handle(request).do((event: HttpEvent<any>) => {
      if (event instanceof HttpResponse) {
        // do stuff with response if you want
      }
    }, (err: any) => {
      if (err instanceof HttpErrorResponse) {
        // do stuff with response error if you want
      }
    });
  }
}

We can use this AuthHttpInterceptor class as a provider for the HttpInterceptors:

import { BrowserModule } from '@angular/platform-browser';
import { NgModule } from '@angular/core';
import { AppComponent } from './app.component';
import { AppRoutingModule } from './app.routing-module';
import { AuthHttpInterceptor } from './services/auth-http.interceptor';
import { HttpClientModule, HTTP_INTERCEPTORS } from '@angular/common/http';
import { BrowserAnimationsModule } from '@angular/platform-browser/animations';

@NgModule({
  declarations: [
    AppComponent
  ],
  imports: [
    BrowserModule,
    AppRoutingModule,
    HttpClientModule,
    BrowserAnimationsModule,
  ],
  providers: [
    {
      provide: HTTP_INTERCEPTORS,
      useClass: AuthHttpInterceptor,
      multi: true
    }
  ],
  exports: [],
  bootstrap: [AppComponent]
})
export class AppModule {
}

I started using Notepad++ for Python very recently and I found this method very easy. Once you are ready to run the code,right-click on the tab of your code in Notepad++ window and select "Open Containing Folder in cmd". This will open the Command Prompt into the folder where the current program is stored. All you need to do now is to execute:

python

This was done on Notepad++ (Build 10 Jan 2015).

I can't add the screenshots, so here's a blog post with the screenshots - http://coder-decoder.blogspot.in/2015/03/using-notepad-in-windows-to-edit-and.html

It is not possible with the standard query operators - it is Language Integrated Query, not Language Integrated Update. But you could hide your update in extension methods.

public static class UpdateExtension
{
    public static IEnumerable<Car> ChangeColorTo(
       this IEnumerable<Car> cars, Color color)
    {
       foreach (Car car in cars)
       {
          car.Color = color;
          yield return car;
       }
    }
}

Now you can use it as follows.

cars.Where(car => car.Color == Color.Blue).ChangeColorTo(Color.Red);

I am trying to obtain a handle on one of the views in the Action Bar

I will assume that you mean something established via android:actionLayout in your <item> element of your <menu> resource.

I have tried calling findViewById(R.id.menu_item)

To retrieve the View associated with your android:actionLayout, call findItem() on the Menu to retrieve the MenuItem, then call getActionView() on the MenuItem. This can be done any time after you have inflated the menu resource.

this is trivially easy, why are so many people making such bad suggestions? @Bora was the closest, but this is the most robust

/***
 * returns the month in words for a given month number
 */
date("F", strtotime(date("Y")."-".$month."-01"));

this is the way to do it

The best way to set/get the value of a textarea is the .val(), .value method.

.text() internally uses the .textContent (or .innerText for IE) method to get the contents of a <textarea>. The following test cases illustrate how text() and .val() relate to each other:

var t = '<textarea>';
console.log($(t).text('test').val());             // Prints test
console.log($(t).val('too').text('test').val());  // Prints too
console.log($(t).val('too').text());              // Prints nothing
console.log($(t).text('test').val('too').val());  // Prints too

console.log($(t).text('test').val('too').text()); // Prints test

The value property, used by .val() always shows the current visible value, whereas text()'s return value can be wrong.

Ideone supports Python 2.6 and Python 3

For the simple case of just copying the last commit from branch wss to v2.1, you can simply grab the commit id (git log --oneline | head -n 1) and do:

git checkout v2.1
git merge <commit>

Just make sure to write the docker name correctly!

In my case, I wrote (notice the extra 'u'):

FROM ubunutu:16.04

The correct docker name is:

FROM ubuntu:16.04

I assume that you haven't set the TableName property of the DataTable, for example via constructor:

var tbl = new DataTable("dtImage");

If you don't provide a name, it will be automatically created with "Table1", the next table will get "Table2" and so on.

Then the solution would be to provide the TableName and then check with Contains(nameOfTable).

To clarify it: You'll get an ArgumentException if that DataTable already belongs to the DataSet (the same reference). You'll get a DuplicateNameException if there's already a DataTable in the DataSet with the same name(not case-sensitive).

http://msdn.microsoft.com/en-us/library/as4zy2kc.aspx

A simple solution is to make the scope variable object. Then access the content with {{ whatever-object.whatever-property }}. The variable is not updating because JavaScript pass Primitive type by value. Whereas Object are passed by reference which solves the problem.

Use :

FileInfo fInfo = new FileInfo('FilePath');
var fFirstTime = fInfo.CreationTime;
var fLastTime = fInfo.LastWriteTime;

by typing yes it wont charge taxes, by typing no it will charge taxes.

=IF(C39="Yes","0",IF(C39="no",PRODUCT(G36*0.0825)))

Couldn't get the w.Timeout code to work when pulled out the network cable, it just wasn't timing out, moved to using HttpWebRequest and does the job now.

HttpWebRequest request = (HttpWebRequest)WebRequest.Create(downloadUrl);
request.Timeout = 10000;
request.ReadWriteTimeout = 10000;
var wresp = (HttpWebResponse)request.GetResponse();

using (Stream file = File.OpenWrite(downloadFile))
{
    wresp.GetResponseStream().CopyTo(file);
}

I had the same doubt as you until I came across this book by the C++ Guru Scott Meyers. Refer the third Item in this book where he talks in details about using const.

Just follow this advice

1. If the word const appears to the left of the asterisk, what's pointed to is constant
2. If the word const appears to the right of the asterisk, the pointer itself is constant
3. If const appears on both sides, both are constant

Unless you're talking about base 16 numbers (for which there's a method to parse as Hex), you need to explicitly separate out the part that you are interested in, and then convert it. After all, what would be the semantics of something like 23e44e11d in base 10?

Regular expressions could do the trick if you know for sure that you only have one number. Java has a built in regular expression parser.

If, on the other hands, your goal is to concatenate all the digits and dump the alphas, then that is fairly straightforward to do by iterating character by character to build a string with StringBuilder, and then parsing that one.

I found the following algorithm provides a very good statistical distribution. Each input bit affects each output bit with about 50% probability. There are no collisions (each input results in a different output). The algorithm is fast except if the CPU doesn't have a built-in integer multiplication unit. C code, assuming int is 32 bit (for Java, replace >> with >>> and remove unsigned):

unsigned int hash(unsigned int x) {
    x = ((x >> 16) ^ x) * 0x45d9f3b;
    x = ((x >> 16) ^ x) * 0x45d9f3b;
    x = (x >> 16) ^ x;
    return x;
}

The magic number was calculated using a special multi-threaded test program that ran for many hours, which calculates the avalanche effect (the number of output bits that change if a single input bit is changed; should be nearly 16 on average), independence of output bit changes (output bits should not depend on each other), and the probability of a change in each output bit if any input bit is changed. The calculated values are better than the 32-bit finalizer used by MurmurHash, and nearly as good (not quite) as when using AES. A slight advantage is that the same constant is used twice (it did make it slightly faster the last time I tested, not sure if it's still the case).

You can reverse the process (get the input value from the hash) if you replace the 0x45d9f3b with 0x119de1f3 (the multiplicative inverse):

unsigned int unhash(unsigned int x) {
    x = ((x >> 16) ^ x) * 0x119de1f3;
    x = ((x >> 16) ^ x) * 0x119de1f3;
    x = (x >> 16) ^ x;
    return x;
}

For 64-bit numbers, I suggest to use the following, even thought it might not be the fastest. This one is based on splitmix64, which seems to be based on the blog article Better Bit Mixing (mix 13).

uint64_t hash(uint64_t x) {
    x = (x ^ (x >> 30)) * UINT64_C(0xbf58476d1ce4e5b9);
    x = (x ^ (x >> 27)) * UINT64_C(0x94d049bb133111eb);
    x = x ^ (x >> 31);
    return x;
}

For Java, use long, add L to the constant, replace >> with >>> and remove unsigned. In this case, reversing is more complicated:

uint64_t unhash(uint64_t x) {
    x = (x ^ (x >> 31) ^ (x >> 62)) * UINT64_C(0x319642b2d24d8ec3);
    x = (x ^ (x >> 27) ^ (x >> 54)) * UINT64_C(0x96de1b173f119089);
    x = x ^ (x >> 30) ^ (x >> 60);
    return x;
}

Update: You may also want to look at the Hash Function Prospector project, where other (possibly better) constants are listed.

Mouseover events bubble, so you can put a single listener on the body and wait for them to bubble up, then grab the event.target or event.srcElement:

function getTarget(event) {
    var el = event.target || event.srcElement;
    return el.nodeType == 1? el : el.parentNode;
}

<body onmouseover="doSomething(getTarget(event));">

If your local installation is running XAMPP on Windows , That's enough : you can open the file "\xampp\php\php.ini" to activate the php exstension by removing the beginning semicolon at the line ";extension=php_imap.dll". It should be:

;extension=php_imap.dll

to

extension=php_imap.dll

You may try the Open Source Active Python Setup which is a well done Python installer for Windows. You just have to desinstall your version and install it...

If you're not sure whether the object has been disposed or not, you should call the Dispose method itself rather than methods such as Close. While the framework doesn't guarantee that the Dispose method must run without exceptions even if the object had previously been disposed, it's a common pattern and to my knowledge implemented on all disposable objects in the framework.

The typical pattern for Dispose, as per Microsoft:

public void Dispose() 
{
    Dispose(true);

    // Use SupressFinalize in case a subclass
    // of this type implements a finalizer.
    GC.SuppressFinalize(this);      
}

protected virtual void Dispose(bool disposing)
{
    // If you need thread safety, use a lock around these 
    // operations, as well as in your methods that use the resource.
    if (!_disposed)
    {
        if (disposing) {
            if (_resource != null)
                _resource.Dispose();
                Console.WriteLine("Object disposed.");
        }

        // Indicate that the instance has been disposed.
        _resource = null;
        _disposed = true;   
    }
}

Notice the check on _disposed. If you were to call a Dispose method implementing this pattern, you could call Dispose as many times as you wanted without hitting exceptions.

The shortcut is: CTRL+shift+- ("shift+-" results in "_") After typing the shortcut, nano will let you to enter the line you wanna jump to, type in the line number, then press ENTR.

You would usually use map for that kind of thing.

buttonsListArr = initialArr.map(buttonInfo => (
  <Button ... key={buttonInfo[0]}>{buttonInfo[1]}</Button>
);

(key is a necessary prop whenever you do mapping in React. The key needs to be a unique identifier for the generated component)

As a side, I would use an object instead of an array. I find it looks nicer:

initialArr = [
  {
    id: 1,
    color: "blue",
    text: "text1"
  },
  {
    id: 2,
    color: "red",
    text: "text2"
  },
];

buttonsListArr = initialArr.map(buttonInfo => (
  <Button ... key={buttonInfo.id}>{buttonInfo.text}</Button>
);

It shouldn't matter if the word has an even or odd amount fo letters:

def is_palindrome(word):
    if word == word[::-1]:
        return True
    else:
        return False

The setState() operation is asynchronous and hence your console.log() will be executed before the setState() mutates the values and hence you see the result.

To solve it, log the value in the callback function of setState(), like:

setTimeout(() => {
    this.setState({dealersOverallTotal: total},
    function(){
       console.log(this.state.dealersOverallTotal, 'dealersOverallTotal1');
    });
}, 10)

I know this is ancient but what about...

4x4 example (actually 4x<anything>):

var matrix = [ [],[],[],[] ]

which can filled by:

for (var i=0; i<4; i++) {
   for (var j=0; j<4; j++) {
      matrix[i][j] = i*j;
   }
}

As you say, ordinal is a bit risky. Consider for example:

public enum Boolean {
    TRUE, FALSE
}

public class BooleanTest {
    @Test
    public void testEnum() {
        assertEquals(0, Boolean.TRUE.ordinal());
        assertEquals(1, Boolean.FALSE.ordinal());
    }
}

If you stored this as ordinals, you might have rows like:

> SELECT STATEMENT, TRUTH FROM CALL_MY_BLUFF

"Alice is a boy"      1
"Graham is a boy"     0

But what happens if you updated Boolean?

public enum Boolean {
    TRUE, FILE_NOT_FOUND, FALSE
}

This means all your lies will become misinterpreted as 'file-not-found'

Better to just use a string representation

Got it from here. It works for iOS 9

UIApplication *app = [UIApplication sharedApplication];
NSArray *eventArray = [app scheduledLocalNotifications];
for (int i=0; i<[eventArray count]; i++)
{
    UILocalNotification* oneEvent = [eventArray objectAtIndex:i];
    //Cancelling local notification
    [app cancelLocalNotification:oneEvent];
}

Shouldn't you have:

DELETE FROM tableA WHERE entitynum IN (...your select...)

Now you just have a WHERE with no comparison:

DELETE FROM tableA WHERE (...your select...)

So your final query would look like this;

DELETE FROM tableA WHERE entitynum IN (
    SELECT tableA.entitynum FROM tableA q
      INNER JOIN tableB u on (u.qlabel = q.entityrole AND u.fieldnum = q.fieldnum) 
    WHERE (LENGTH(q.memotext) NOT IN (8,9,10) OR q.memotext NOT LIKE '%/%/%')
      AND (u.FldFormat = 'Date')
)

It is bad form to use this in lock statements because it is generally out of your control who else might be locking on that object.

In order to properly plan parallel operations, special care should be taken to consider possible deadlock situations, and having an unknown number of lock entry points hinders this. For example, any one with a reference to the object can lock on it without the object designer/creator knowing about it. This increases the complexity of multi-threaded solutions and might affect their correctness.

A private field is usually a better option as the compiler will enforce access restrictions to it, and it will encapsulate the locking mechanism. Using this violates encapsulation by exposing part of your locking implementation to the public. It is also not clear that you will be acquiring a lock on this unless it has been documented. Even then, relying on documentation to prevent a problem is sub-optimal.

Finally, there is the common misconception that lock(this) actually modifies the object passed as a parameter, and in some way makes it read-only or inaccessible. This is false. The object passed as a parameter to lock merely serves as a key. If a lock is already being held on that key, the lock cannot be made; otherwise, the lock is allowed.

This is why it's bad to use strings as the keys in lock statements, since they are immutable and are shared/accessible across parts of the application. You should use a private variable instead, an Object instance will do nicely.

Run the following C# code as an example.

public class Person
{
    public int Age { get; set;  }
    public string Name { get; set; }

    public void LockThis()
    {
        lock (this)
        {
            System.Threading.Thread.Sleep(10000);
        }
    }
}

class Program
{
    static void Main(string[] args)
    {
        var nancy = new Person {Name = "Nancy Drew", Age = 15};
        var a = new Thread(nancy.LockThis);
        a.Start();
        var b = new Thread(Timewarp);
        b.Start(nancy);
        Thread.Sleep(10);
        var anotherNancy = new Person { Name = "Nancy Drew", Age = 50 };
        var c = new Thread(NameChange);
        c.Start(anotherNancy);
        a.Join();
        Console.ReadLine();
    }

    static void Timewarp(object subject)
    {
        var person = subject as Person;
        if (person == null) throw new ArgumentNullException("subject");
        // A lock does not make the object read-only.
        lock (person.Name)
        {
            while (person.Age <= 23)
            {
                // There will be a lock on 'person' due to the LockThis method running in another thread
                if (Monitor.TryEnter(person, 10) == false)
                {
                    Console.WriteLine("'this' person is locked!");
                }
                else Monitor.Exit(person);
                person.Age++;
                if(person.Age == 18)
                {
                    // Changing the 'person.Name' value doesn't change the lock...
                    person.Name = "Nancy Smith";
                }
                Console.WriteLine("{0} is {1} years old.", person.Name, person.Age);
            }
        }
    }

    static void NameChange(object subject)
    {
        var person = subject as Person;
        if (person == null) throw new ArgumentNullException("subject");
        // You should avoid locking on strings, since they are immutable.
        if (Monitor.TryEnter(person.Name, 30) == false)
        {
            Console.WriteLine("Failed to obtain lock on 50 year old Nancy, because Timewarp(object) locked on string \"Nancy Drew\".");
        }
        else Monitor.Exit(person.Name);

        if (Monitor.TryEnter("Nancy Drew", 30) == false)
        {
            Console.WriteLine("Failed to obtain lock using 'Nancy Drew' literal, locked by 'person.Name' since both are the same object thanks to inlining!");
        }
        else Monitor.Exit("Nancy Drew");
        if (Monitor.TryEnter(person.Name, 10000))
        {
            string oldName = person.Name;
            person.Name = "Nancy Callahan";
            Console.WriteLine("Name changed from '{0}' to '{1}'.", oldName, person.Name);
        }
        else Monitor.Exit(person.Name);
    }
}

Console output

'this' person is locked!
Nancy Drew is 16 years old.
'this' person is locked!
Nancy Drew is 17 years old.
Failed to obtain lock on 50 year old Nancy, because Timewarp(object) locked on string "Nancy Drew".
'this' person is locked!
Nancy Smith is 18 years old.
'this' person is locked!
Nancy Smith is 19 years old.
'this' person is locked!
Nancy Smith is 20 years old.
Failed to obtain lock using 'Nancy Drew' literal, locked by 'person.Name' since both are the same object thanks to inlining!
'this' person is locked!
Nancy Smith is 21 years old.
'this' person is locked!
Nancy Smith is 22 years old.
'this' person is locked!
Nancy Smith is 23 years old.
'this' person is locked!
Nancy Smith is 24 years old.
Name changed from 'Nancy Drew' to 'Nancy Callahan'.

I had problems with most of the tools in other answers as they are all very outdated.

If you need a solution that will "just work", pack a bare-bones version of php with your project in a WinRar SFX archive, set it to extract everything to a temporary directory and execute php your_script.php.

To run a basic script, the only files required are php.exe and php5.dll (or php5ts.dll depending on version).

To add extensions, pack them along with a php.ini file:

[PHP]
extension_dir = "."
extension=php_curl.dll
extension=php_xxxx.dll
...

I have found the following code to be the most consistent, performant, and simple.

var scripts = document.getElementsByTagName('script');
var thisScript = null;
var i = scripts.length;
while (i--) {
  if (scripts[i].src && (scripts[i].src.indexOf('yourscript.js') !== -1)) {
    thisScript = scripts[i];
    break;
  }
}
console.log(thisScript);

If the web service being invoked uses windows integrated security, creating a NetworkCredential from the current WindowsIdentity should be sufficient to allow the web service to use the current users windows login. However, if the web service uses a different security model, there isn't any way to extract a users password from the current identity ... that in and of itself would be insecure, allowing you, the developer, to steal your users passwords. You will likely need to provide some way for your user to provide their password, and keep it in some secure cache if you don't want them to have to repeatedly provide it.

Edit: To get the credentials for the current identity, use the following:

Uri uri = new Uri("http://tempuri.org/");
ICredentials credentials = CredentialCache.DefaultCredentials;
NetworkCredential credential = credentials.GetCredential(uri, "Basic");

If you want to change the format for all dates you can add a builder customizer. Here is an example of a bean that converts dates to ISO 8601:

@Bean
public Jackson2ObjectMapperBuilderCustomizer jsonCustomizer() {
    return new Jackson2ObjectMapperBuilderCustomizer() {
        @Override
        public void customize(Jackson2ObjectMapperBuilder builder) {
            builder.dateFormat(new ISO8601DateFormat());        
        }           
    };
}

@Jacob Dalton has mentioned this in a comment, but nobody seems to have mentioned in an answer that vim has to be compiled with clipboard support for any of the suggestions mentioned here to work. Mine wasn't configured that way on Mac OS X by default and I had to rebuild vim. Use this the command to find out whether you have it or not vim --version | grep 'clipboard'. +clipboard means you're good and the suggestions here will work for you, while -clipboard means you have to recompile and rebuild vim.

I read a csv with two columns from bucket s3, and the content of the file csv i put in pandas dataframe.

Example:

config.json

{
  "credential": {
    "access_key":"xxxxxx",
    "secret_key":"xxxxxx"
}
,
"s3":{
       "bucket":"mybucket",
       "key":"csv/user.csv"
   }
}

cls_config.json

#!/usr/bin/env python
# -*- coding: utf-8 -*-

import os
import json

class cls_config(object):

    def __init__(self,filename):

        self.filename = filename


    def getConfig(self):

        fileName = os.path.join(os.path.dirname(__file__), self.filename)
        with open(fileName) as f:
        config = json.load(f)
        return config

cls_pandas.py

#!/usr/bin/env python
# -*- coding: utf-8 -*-

import pandas as pd
import io

class cls_pandas(object):

    def __init__(self):
        pass

    def read(self,stream):

        df = pd.read_csv(io.StringIO(stream), sep = ",")
        return df

cls_s3.py

#!/usr/bin/env python
# -*- coding: utf-8 -*-

import boto3
import json

class cls_s3(object):

    def  __init__(self,access_key,secret_key):

        self.s3 = boto3.client('s3', aws_access_key_id=access_key, aws_secret_access_key=secret_key)

    def getObject(self,bucket,key):

        read_file = self.s3.get_object(Bucket=bucket, Key=key)
        body = read_file['Body'].read().decode('utf-8')
        return body

test.py

#!/usr/bin/env python
# -*- coding: utf-8 -*-

from cls_config import *
from cls_s3 import *
from cls_pandas import *

class test(object):

    def __init__(self):
        self.conf = cls_config('config.json')

    def process(self):

        conf = self.conf.getConfig()

        bucket = conf['s3']['bucket']
        key = conf['s3']['key']

        access_key = conf['credential']['access_key']
        secret_key = conf['credential']['secret_key']

        s3 = cls_s3(access_key,secret_key)
        ob = s3.getObject(bucket,key)

        pa = cls_pandas()
        df = pa.read(ob)

        print df

if __name__ == '__main__':
    test = test()
    test.process()

You can use rfind() or rindex()
^{Python2 links: rfind() rindex()}

>>> s = 'Hello StackOverflow Hi everybody'

>>> print( s.rfind('H') )
20

>>> print( s.rindex('H') )
20

>>> print( s.rfind('other') )
-1

>>> print( s.rindex('other') )
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
ValueError: substring not found

The difference is when the substring is not found, rfind() returns -1 while rindex() raises an exception ValueError (Python2 link: ValueError).

If you do not want to check the rfind() return code -1, you may prefer rindex() that will provide an understandable error message. Else you may search for minutes where the unexpected value -1 is coming from within your code...

Example: Search of last newline character

>>> txt = '''first line
... second line
... third line'''

>>> txt.rfind('\n')
22

>>> txt.rindex('\n')
22

Raystorm had a good answer. I'm not a big fan of Rules either. I do something similar, except that I create the following utility class to help readability and usability, which is one of the big plus'es of annotations in the first place.

Add this utility class:

import org.junit.Assert;

public abstract class ExpectedRuntimeExceptionAsserter {

    private String expectedExceptionMessage;

    public ExpectedRuntimeExceptionAsserter(String expectedExceptionMessage) {
        this.expectedExceptionMessage = expectedExceptionMessage;
    }

    public final void run(){
        try{
            expectException();
            Assert.fail(String.format("Expected a RuntimeException '%s'", expectedExceptionMessage));
        } catch (RuntimeException e){
            Assert.assertEquals("RuntimeException caught, but unexpected message", expectedExceptionMessage, e.getMessage());
        }
    }

    protected abstract void expectException();

}

Then for my unit test, all I need is this code:

@Test
public void verifyAnonymousUserCantAccessPrivilegedResourceTest(){
    new ExpectedRuntimeExceptionAsserter("anonymous user can't access privileged resource"){
        @Override
        protected void expectException() {
            throw new RuntimeException("anonymous user can't access privileged resource");
        }
    }.run(); //passes test; expected exception is caught, and this @Test returns normally as "Passed"
}

There is a more efficient way of doing this in Windows 7. SETX is installed by default and supports connecting to other systems.

To modify a remote system's global environment variables, you would use

setx /m /s HOSTNAME-GOES-HERE VariableNameGoesHere VariableValueGoesHere

This does not require restarting Windows Explorer.

The insert or replace query would insert a new record if id=1 does not already exist.

The update query would only oudate id=1 if it aready exist, it would not create a new record if it didn't exist.

Compare also the difference between {} and set() with a single word argument.

>>> a = set('aardvark')
>>> a
{'d', 'v', 'a', 'r', 'k'} 
>>> b = {'aardvark'}
>>> b
{'aardvark'}

but both a and b are sets of course.

Here is one way to “untrack” any files that are would otherwise be ignored under the current set of exclude patterns:

(GIT_INDEX_FILE=some-non-existent-file \
git ls-files --exclude-standard --others --directory --ignored -z) |
xargs -0 git rm --cached -r --ignore-unmatch --

This leaves the files in your working directory but removes them from the index.

The trick used here is to provide a non-existent index file to git ls-files so that it thinks there are no tracked files. The shell code above asks for all the files that would be ignored if the index were empty and then removes them from the actual index with git rm.

After the files have been “untracked”, use git status to verify that nothing important was removed (if so adjust your exclude patterns and use git reset -- path to restore the removed index entry). Then make a new commit that leaves out the “crud”.

The “crud” will still be in any old commits. You can use git filter-branch to produce clean versions of the old commits if you really need a clean history (n.b. using git filter-branch will “rewrite history”, so it should not be undertaken lightly if you have any collaborators that have pulled any of your historical commits after the “crud” was first introduced).

Simply install the 32-bit version of the program, instead of the 64-bit version.

This is much safer than installing packages that are not intended for the distribution at hand.

I got this suggestion from the Google Earth installation instructions for Ubuntu 14.04. Google Earth used to employ ia32-libs under 64-bit Ubuntu 12.04.

Quoting webupd8.org:

The ia32-libs package is no longer available in Ubuntu, starting with Ubuntu 13.10. The package was superseded by multiarch support so you don't need it any more, but some 64bit packages (which are actually 32bit applications) still depend on this package and because of this, they can't be installed in Ubuntu 14.04 or 13.10, 64bit. [...]

The "fix" or more specifically the correct way of installing these apps which depend on ia32-libs is to simply install the 32bit package on Ubuntu 64bit. Of course, that will install quite a few 32bit packages, but that's how multiarch works.

The problem with some programs (like Google Earth) is that the 32-bit package does not support multiarch. Consequently, some 32-bit dependencies need to be installed manually to make the 32-bit version of the program run on Ubuntu 64-bit.

sudo dpkg --add-architecture i386 # only needed once
sudo apt-get update
sudo apt-get install libfontconfig1:i386 libx11-6:i386 libxrender1:i386 libxext6:i386 libgl1-mesa-glx:i386 libglu1-mesa:i386 libglib2.0-0:i386 libsm6:i386

In Xamarin.Android

For Fragment:

this.Activity.RunOnUiThread(() => { yourtextbox.Text="Hello"; });

For Activity:

RunOnUiThread(() => { yourtextbox.Text="Hello"; });

Happy coding :-)

Environment.GetCommandLineArgs()[0]

Your onCreate() method has several huge flaws:

1) onCreate prepares your Activity - so nothing that you do here will be made visible to the user until this method finishes! For example - you will never be able to alter a TextView's text here more than ONE time as only the last change will be drawn and thus visible to the user!

2) Keep in mind that an Android program will - by default - run in ONE thread only! Thus: never use Thread.sleep() or Thread.wait() in your main thread which is responsible for your UI! (read "Keep your App Responsive" for further information!)

What your initialization of your Activity does is:

• for no reason you create a new TextView object t!
• you pick your layout's TextView in the variable t later.
• you set the text of t (but keep in mind: it will be displayed only after onCreate() finishes and the main event loop of your application runs!)
• you wait for 10 seconds within your onCreate method - this must never be done as it stops all UI activity and will definitely force an ANR (Application Not Responding, see link above!)
• then you set another text - this one will be displayed as soon as your onCreate() method finishes and several other Activity lifecycle methods have been processed!

The solution:

1. Set text only once in onCreate() - this must be the first text that should be visible.

2. Create a Runnable and a Handler

   private final Runnable mUpdateUITimerTask = new Runnable() {
       public void run() {
           // do whatever you want to change here, like:
           t.setText("Second text to display!");
       }
   };
   private final Handler mHandler = new Handler();
   

3. install this runnable as a handler, possible in onCreate() (but read my advice below):

   // run the mUpdateUITimerTask's run() method in 10 seconds from now
   mHandler.postDelayed(mUpdateUITimerTask, 10 * 1000);
   

Advice: be sure you know an Activity's lifecycle! If you do stuff like that in onCreate()this will only happen when your Activity is created the first time! Android will possibly keep your Activity alive for a longer period of time, even if it's not visible! When a user "starts" it again - and it is still existing - you will not see your first text anymore!

=> Always install handlers in onResume() and disable them in onPause()! Otherwise you will get "updates" when your Activity is not visible at all! In your case, if you want to see your first text again when it is re-activated, you must set it in onResume(), not onCreate()!

Importing large sql file to MySql via command line

1. first download file .
2. paste file on home.
3. use following command in your terminals(CMD)
4. Syntax: mysql -u username -p databsename < file.sql

Example: mysql -u root -p aanew < aanew.sql

In my case(my machine is ubuntu 16), I append /etc/resolvconf/resolv.conf.d/base file by adding below ns lines.

nameserver 8.8.8.8
nameserver 4.2.2.1
nameserver 2001:4860:4860::8844
nameserver 2001:4860:4860::8888

then run the update script,

resolvconf -u

java.exe is the console app while javaw.exe is windows app (console-less). You can't have Console with javaw.exe.

According to the docs, #Rails.env wraps RAILS_ENV:

    # File vendor/rails/railties/lib/initializer.rb, line 55
     def env
       @_env ||= ActiveSupport::StringInquirer.new(RAILS_ENV)
     end

But, look at specifically how it's wrapped, using ActiveSupport::StringInquirer:

Wrapping a string in this class gives you a prettier way to test for equality. The value returned by Rails.env is wrapped in a StringInquirer object so instead of calling this:

Rails.env == "production"

you can call this:

Rails.env.production?

So they aren't exactly equivalent, but they're fairly close. I haven't used Rails much yet, but I'd say #Rails.env is certainly the more visually attractive option due to using StringInquirer.

I could not get the previous answer to work. I did the following to get the index of the tab by name:

var index = $('#tabs a[href="#simple-tab-2"]').parent().index();
$('#tabs').tabs('select', index);

Not all formats store their frame count or total duration - and even if they do, the file might be incomplete - so ffmpeg doesn't detect either of them accurately by default.

Instead, try seeking to the end of the file and read the time, then count the current time while you go.

Alternatively, you can try AVFormatContext->nb_index_entries or the detected duration, which should work on fine at least undamaged AVI/MOV, or the library FFMS2, which is probably too slow to bother with for a progress bar.

Primary key mainly prevent duplication and shows the uniqueness of columns Foreign key mainly shows relationship on two tables

I was getting the same error and was able to solve it by updating my numpy installation to 1.8.0:

pip install -U numpy

You can do a casting. For example, if exists one method with this definition, and you know that this method is returning a List:

Collection<String> getStrings();

And after invoke it, you need the first element, you can do it like this:

List<String> listString = (List) getStrings();
String firstElement = (listString.isEmpty() ? null : listString.get(0));

I don't think location.LatLng is working, however this works:

results[0].geometry.location.lat(), results[0].geometry.location.lng()

Found it while exploring Get Lat Lon source code.

During the installation you got a message Composer successfully installed to: ... this indicates where Composer was installed. But you might also search for the file composer.phar on your system.

Then simply:

1. Delete the file composer.phar.
2. Delete the Cache Folder:
   • Linux: /home/<user>/.composer
   • Windows: C:\Users\<username>\AppData\Roaming\Composer

That's it.

Adm-zip has problems just compressing an existing archive https://github.com/cthackers/adm-zip/issues/64 as well as corruption with compressing binary files.

I've also ran into compression corruption issues with node-zip https://github.com/daraosn/node-zip/issues/4

node-archiver is the only one that seems to work well to compress but it doesn't have any uncompress functionality.

I would use a Canvas that I add to the JPanel, and draw the image on the Canvas. But Canvas is a quite heavy object, sine it is from awt.

I don't know about underline, but for bold and italic there is "bolditalic". There is no mention of underline here: http://developer.android.com/reference/android/widget/TextView.html#attr_android:textStyle

Mind you that to use the mentioned bolditalic you need to, and I quote from that page

Must be one or more (separated by '|') of the following constant values.

so you'd use bold|italic

You could check this question for underline: Can I underline text in an android layout?

Streams Java 8

Along with forEach method that accepts a lambda expression we have also got stream APIs, in Java 8.

Iterate over entries (Using forEach and Streams):

sample.forEach((k,v) -> System.out.println(k + "=" + v)); 
sample.entrySet().stream().forEachOrdered((entry) -> {
            Object currentKey = entry.getKey();
            Object currentValue = entry.getValue();
            System.out.println(currentKey + "=" + currentValue);
        });
sample.entrySet().parallelStream().forEach((entry) -> {
            Object currentKey = entry.getKey();
            Object currentValue = entry.getValue();
            System.out.println(currentKey + "=" + currentValue);
        });

The advantage with streams is they can be parallelized easily and can be useful when we have multiple CPUs at disposal. We simply need to use parallelStream() in place of stream() above. With parallel streams it makes more sense to use forEach as forEachOrdered would make no difference in performance. If we want to iterate over keys we can use sample.keySet() and for values sample.values().

Why forEachOrdered and not forEach with streams ?

Streams also provide forEach method but the behaviour of forEach is explicitly nondeterministic where as the forEachOrdered performs an action for each element of this stream, in the encounter order of the stream if the stream has a defined encounter order. So forEach does not guarantee that the order would be kept. Also check this for more.

Try this one in Java

for (int i = 6, k = 0; i > 0 && k < 6; i--, k++) {
    for (int j = 0; j < i; j++) {
        System.out.print(" ");
    }
    for (int j = 0; j < k; j++) {
        System.out.print("*");
    }
    for (int j = 1; j < k; j++) {
        System.out.print("*");
    }
    System.out.println();
}

Error:(30, 13) Failed to resolve: com.google.firebase:firebase-auth:9.6.1

If you ever get this error and you are using Android studio 2.2 that comes with firebase component integrated in it which has libraries version 9.6.0 by default and you are adding the latest dependencies like 9.6.1 . You might need to downgrade com.google.firebase:firebase-auth:9.6.1 to com.google.firebase:firebase-auth:9.6.0

Or check the library version of your pre-installed firebase and make sure it is of the same version with the new library you are trying to add or added to your project.

This might be an alternative solution. Paste the following code into the new module:

Public Function ModDate()
ModDate = 
Format(FileDateTime(ThisWorkbook.FullName), "m/d/yy h:n ampm") 
End Function

Before saving your module, make sure to save your Excel file as Excel Macro-Enabled Workbook.

Paste the following code into the cell where you want to display the last modification time:

=ModDate()

I'd also like to recommend an alternative to Excel allowing you to add creation and last modification time easily. Feel free to check on RowShare and this article I wrote: https://www.rowshare.com/blog/en/2018/01/10/Displaying-Last-Modification-Time-in-Excel

I have an answer for you Yes, It is possible.

Go to

SQL Server Management Studio > select Database > click on attach

Then select and add .mdf and .ldf file. Click on OK.

Following the documentation of fopen:

``a'' Open for writing. The file is created if it does not exist. The stream is positioned at the end of the file. Subsequent writes to the file will always end up at the then cur- rent end of file, irrespective of any intervening fseek(3) or similar.

So if you pFile2=fopen("myfile2.txt", "a"); the stream is positioned at the end to append automatically. just do:

FILE *pFile;
FILE *pFile2;
char buffer[256];

pFile=fopen("myfile.txt", "r");
pFile2=fopen("myfile2.txt", "a");
if(pFile==NULL) {
    perror("Error opening file.");
}
else {
    while(fgets(buffer, sizeof(buffer), pFile)) {
        fprintf(pFile2, "%s", buffer);
    }
}
fclose(pFile);
fclose(pFile2);

If you are using the 'pylab' for interactive plotting you can set the labelsize at creation time with pylab.ylabel('Example', fontsize=40).

If you use pyplot programmatically you can either set the fontsize on creation with ax.set_ylabel('Example', fontsize=40) or afterwards with ax.yaxis.label.set_size(40).

I copied a master.mdf und mastlog.ldf from another Computer (luckily, we have a lot of Clients with the same configuration, otherwise template data would be perhaps necessary). I backed up the damaged master.mdf and mastlog.mdf. After that I replaced the bad ones with the ones from another Computer. And it worked. I needed to start the MSSQLSERVER Service of course. But, after that I had Problem that the user was already existing but orphaned (error code 15023), I executed the query

USE Database_name EXEC sp_change_users_login 'Auto_Fix', 'username'

after that, everything was working smoothly. Hope this helps you and many thanks for this thread, saved me :)

getActionCommand()

Returns the command string associated with this action. This string allows a "modal" component to specify one of several commands, depending on its state. For example, a single button might toggle between "show details" and "hide details". The source object and the event would be the same in each case, but the command string would identify the intended action.

IMO, this is useful in case you a single command-component to fire different commands based on it's state, and using this method your handler can execute the right lines of code.

JTextField has JTextField#setActionCommand(java.lang.String) method that you can use to set the command string used for action events generated by it.

getSource()

Returns: The object on which the Event initially occurred.

We can use getSource() to identify the component and execute corresponding lines of code within an action-listener. So, we don't need to write a separate action-listener for each command-component. And since you have the reference to the component itself, you can if you need to make any changes to the component as a result of the event.

If the event was generated by the JTextField then the ActionEvent#getSource() will give you the reference to the JTextField instance itself.

This works for me:

Receive

import socket
import struct

MCAST_GRP = '224.1.1.1'
MCAST_PORT = 5007
IS_ALL_GROUPS = True

sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM, socket.IPPROTO_UDP)
sock.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
if IS_ALL_GROUPS:
    # on this port, receives ALL multicast groups
    sock.bind(('', MCAST_PORT))
else:
    # on this port, listen ONLY to MCAST_GRP
    sock.bind((MCAST_GRP, MCAST_PORT))
mreq = struct.pack("4sl", socket.inet_aton(MCAST_GRP), socket.INADDR_ANY)

sock.setsockopt(socket.IPPROTO_IP, socket.IP_ADD_MEMBERSHIP, mreq)

while True:
  # For Python 3, change next line to "print(sock.recv(10240))"
  print sock.recv(10240)

Send

import socket

MCAST_GRP = '224.1.1.1'
MCAST_PORT = 5007
# regarding socket.IP_MULTICAST_TTL
# ---------------------------------
# for all packets sent, after two hops on the network the packet will not 
# be re-sent/broadcast (see https://www.tldp.org/HOWTO/Multicast-HOWTO-6.html)
MULTICAST_TTL = 2

sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM, socket.IPPROTO_UDP)
sock.setsockopt(socket.IPPROTO_IP, socket.IP_MULTICAST_TTL, MULTICAST_TTL)

# For Python 3, change next line to 'sock.sendto(b"robot", ...' to avoid the
# "bytes-like object is required" msg (https://stackoverflow.com/a/42612820)
sock.sendto("robot", (MCAST_GRP, MCAST_PORT))

It is based off the examples from http://wiki.python.org/moin/UdpCommunication which didn't work.

My system is... Linux 2.6.31-15-generic #50-Ubuntu SMP Tue Nov 10 14:54:29 UTC 2009 i686 GNU/Linux Python 2.6.4

This is what you need!

function onGeneratedRow(columnsResult)
{
    var jsonData = {};
    columnsResult.forEach(function(column) 
    {
        var columnName = column.metadata.colName;
        jsonData[columnName] = column.value;
    });
    viewData.employees.push(jsonData);
 }

No, not directly in the std::list template itself. You can however use std::find algorithm like that:

std::list<int> my_list;
//...
int some_value = 12;
std::list<int>::iterator iter = std::find (my_list.begin(), my_list.end(), some_value);
// now variable iter either represents valid iterator pointing to the found element,
// or it will be equal to my_list.end()

According to the Facebook documentation it's not possible to get all the fans of a page:

Although you can't get a list of all the fans of a Facebook Page, you can find out whether a specific person has liked a Page.

You are doing

Object o = prestListView.getItemAtPosition(position);
String str=(String)o;//As you are using Default String Adapter

The o that you get back is not a String, but a prestationEco so you get a CCE when doing the (String)o

You can create your own extension method to do this:

public static bool Contains(this string source, string toCheck, StringComparison comp)
  {
    return source != null && toCheck != null && source.IndexOf(toCheck, comp) >= 0;
  }

And then call:

 mystring.Contains(myStringToCheck, StringComparison.OrdinalIgnoreCase);

1) you are calling it wrong way try:

$(input[name="searchBar"]).val('hi')

2) if it doesn't work call your .js file at the end of the page or trigger your function on document.ready event

$(document).ready(function() {
  $(input[name="searchBar"]).val('hi');
});

Don't try and get too clever and combine pivoting strategies. If you combined median of 3 with random pivot by picking the median of the first, last and a random index in the middle, then you'll still be vulnerable to many of the distributions which send median of 3 quadratic (so its actually worse than plain random pivot)

E.g a pipe organ distribution (1,2,3...N/2..3,2,1) first and last will both be 1 and the random index will be some number greater than 1, taking the median gives 1 (either first or last) and you get an extermely unbalanced partitioning.

I solved this error by add below user-permission in AndroidManifest.xml

 <uses-permission android:name="android.permission.SYSTEM_ALERT_WINDOW" />

Also, Initialize Alert dialog with Activity Name:

AlertDialog.Builder builder = new AlertDialog.Builder(YourActivity.this);

For More Details, visit==> How to create Alert Dialog in Android

Log4js is one of the most popular logging library for nodejs application.

It supports many cool features:

1. Coloured console logging
2. Replacement of node's console.log functions (optional)
3. File appender, with log rolling based on file size
4. SMTP, GELF, hook.io, Loggly appender
5. Multiprocess appender (useful when you've got worker processes)
6. A logger for connect/express servers
7. Configurable log message layout/patterns
8. Different log levels for different log categories (make some parts of your app log as DEBUG, others only ERRORS, etc.)

Example:

1. Installation: npm install log4js

2. Configuration (./config/log4js.json):

   {"appenders": [
       {
           "type": "console",
           "layout": {
               "type": "pattern",
               "pattern": "%m"
           },
           "category": "app"
       },{
           "category": "test-file-appender",
           "type": "file",
           "filename": "log_file.log",
           "maxLogSize": 10240,
           "backups": 3,
           "layout": {
               "type": "pattern",
               "pattern": "%d{dd/MM hh:mm} %-5p %m"
           }
       }
   ],
   "replaceConsole": true }
   

3. Usage:

   var log4js = require( "log4js" );
   log4js.configure( "./config/log4js.json" );
   var logger = log4js.getLogger( "test-file-appender" );
   // log4js.getLogger("app") will return logger that prints log to the console
   logger.debug("Hello log4js");// store log in file
   

I don't think it actually does much, it looks like it's just a cache for string literals. If you have multiple Strings who's values are the same, they'll all point to the same string literal in the string pool.

String s1 = "Arul"; //case 1 
String s2 = "Arul"; //case 2 

In case 1, literal s1 is created newly and kept in the pool. But in case 2, literal s2 refer the s1, it will not create new one instead.

if(s1 == s2) System.out.println("equal"); //Prints equal. 

String n1 = new String("Arul"); 
String n2 = new String("Arul"); 
if(n1 == n2) System.out.println("equal"); //No output.  

http://p2p.wrox.com/java-espanol/29312-string-pooling.html

In order to eliminate this error, you have to fo to the wp-config file and add these lines of code

define('WP_DEBUG_DISPLAY', false);
@ini_set('display_errors',0);

As others have pointed out, the cd command needs to start with a percentage sign:

%cd SwitchFrequencyAnalysis

Difference between % and !

Google Colab seems to inherit these syntaxes from Jupyter (which inherits them from IPython). Jake VanderPlas explains this IPython behaviour here. You can see the excerpt below.

If you play with IPython's shell commands for a while, you might notice that you cannot use !cd to navigate the filesystem:

In [11]: !pwd 
/home/jake/projects/myproject

In [12]: !cd ..

In [13]: !pwd 
/home/jake/projects/myproject 

The reason is that shell commands in the notebook are executed in a temporary subshell. If you'd like to change the working directory in a more enduring way, you can use the %cd magic command:

In [14]: %cd ..
/home/jake/projects

Another way to look at this: you need % because changing directory is relevant to the environment of the current notebook but not to the entire server runtime.

In general, use ! if the command is one that's okay to run in a separate shell. Use % if the command needs to be run on the specific notebook.

It can be helpful to add TRACING to the json serializer so you can see what's up when things go wrong.

Define an ITraceWriter implementation to show their debug output like:

class TraceWriter : Newtonsoft.Json.Serialization.ITraceWriter
{
    public TraceLevel LevelFilter {
        get {
            return TraceLevel.Error;
        }
    }

    public void Trace(TraceLevel level, string message, Exception ex)
    {
        Console.WriteLine("JSON {0} {1}: {2}", level, message, ex);
    }
}

Then in your WebApiConfig do:

    config.Formatters.JsonFormatter.SerializerSettings.TraceWriter = new TraceWriter();

(maybe wrap it in an #if DEBUG)

This is not possible from HTML on. The closest what you can get is the accept-charset attribute of the <form>. Only MSIE browser adheres that, but even then it is doing it wrong (e.g. CP1252 is actually been used when it says that it has sent ISO-8859-1). Other browsers are fully ignoring it and they are using the charset as specified in the Content-Type header of the response. Setting the character encoding right is basically fully the responsiblity of the server side. The client side should just send it back in the same charset as the server has sent the response in.

To the point, you should really configure the character encoding stuff entirely from the server side on. To overcome the inability to edit URIEncoding attribute, someone here on SO wrote a (complex) filter: Detect the URI encoding automatically in Tomcat. You may find it useful as well (note: I haven't tested it).

Update: Noted should be that the meta tag as given in your question is ignored when the content is been transferred over HTTP. Instead, the HTTP response Content-Type header will be used to determine the content type and character encoding. You can determine the HTTP header with for example Firebug, in the Net panel.

I'm using jquery datepicker to select date. My directive read date and convert it to json date format (in milliseconds) store in ng-model data while display formatted date.and reverse if ng-model have json date (in millisecond) my formatter display in my format as jquery datepicker.

Html Code:

<input type="text" jqdatepicker  ng-model="course.launchDate" required readonly />

Angular Directive:

myModule.directive('jqdatepicker', function ($filter) {
    return {
        restrict: 'A',
        require: 'ngModel',
         link: function (scope, element, attrs, ngModelCtrl) {
            element.datepicker({
                dateFormat: 'dd/mm/yy',
                onSelect: function (date) {   
                    var ar=date.split("/");
                    date=new Date(ar[2]+"-"+ar[1]+"-"+ar[0]);
                    ngModelCtrl.$setViewValue(date.getTime());            
                    scope.$apply();
                }
            });
            ngModelCtrl.$formatters.unshift(function(v) {
            return $filter('date')(v,'dd/MM/yyyy'); 
            });

        }
    };
});

The thread module does work simultaneously unlike multiprocess, but the timing is a bit off. The code below prints a "1" and a "2". These are called by different functions respectively. I did notice that when printed to the console, they would have slightly different timings.

from threading import Thread

def one():
    while(1 == num):
        print("1")
        time.sleep(2)
    
def two():
    while(1 == num):
        print("2")
        time.sleep(2)


p1 = Thread(target = one)
p2 = Thread(target = two)

p1.start()
p2.start()

Output: (Note the space is for the wait in between printing)

1
2

2
1

12
   
21

12
   
1
2

Not sure if there is a way to correct this, or if it matters at all. Just something I noticed.

You can easily find and remove bin and obj folders in Far Manager.

1. Navigate to you solution and press Alt+F7

2. In search setting dialog:

   • Type "bin,obj" in field "A file mask or several file masks"
   • Check option "Search for folders"
   • Press Enter

3. After the search is done, switch view to "Panel".

4. Select all files (with Ctrl+A) and delete folders (press "Shift+Del")

Hope it helps someone.

You can find out by measuring memory usage size after calling garbage collector multiple times:

Runtime runtime = Runtime.getRuntime();

while(true) {
    ...
    if(System.currentTimeMillis() % 4000 == 0){
        System.gc();
        float usage = (float) (runtime.totalMemory() - runtime.freeMemory()) / 1024 / 1024;
        System.out.println("Used memory: " + usage + "Mb");
    }

}

If the output numbers were equal, there is no memory leak in your application, but if you saw difference between the numbers of memory usage (increasing numbers), there is memory leak in your project. For example:

Used memory: 14.603279Mb
Used memory: 14.737213Mb
Used memory: 14.772224Mb
Used memory: 14.802681Mb
Used memory: 14.840599Mb
Used memory: 14.900841Mb
Used memory: 14.942261Mb
Used memory: 14.976143Mb

Note that sometimes it takes some time to release memory by some actions like streams and sockets. You should not judge by first outputs, You should test it in a specific amount of time.

The lookup function returns an array of matching elements. You could check if the length is zero. Note the change to only look up the elements once and reuse the results as needed.

var elem = $("#btext" + i);
if (elem.length != 0) {
   elem.text("Branch " + i);
}

Also, have you tried just using the text function -- if no element exists, it will do nothing.

$("#btext" + i).text("Branch " + i);

File file = new File(selectedFilePath);
boolean deleted = file.delete();

where selectedFilePath is the path of the file you want to delete - for example:

/sdcard/YourCustomDirectory/ExampleFile.mp3

NOTE: The original answer below should work for any version of Visual Studio up through Visual Studio 2012. Visual Studio 2013 does not appear to have a Test Results window any more. Instead, if you need test-specific output you can use @Stretch's suggestion of Trace.Write() to write output to the Output window.

The Console.Write method does not write to the "console" -- it writes to whatever is hooked up to the standard output handle for the running process. Similarly, Console.Read reads input from whatever is hooked up to the standard input.

When you run a unit test through Visual Studio 2010, standard output is redirected by the test harness and stored as part of the test output. You can see this by right-clicking the Test Results window and adding the column named "Output (StdOut)" to the display. This will show anything that was written to standard output.

You could manually open a console window, using P/Invoke as sinni800 says. From reading the AllocConsole documentation, it appears that the function will reset stdin and stdout handles to point to the new console window. (I'm not 100% sure about that; it seems kind of wrong to me if I've already redirected stdout for Windows to steal it from me, but I haven't tried.)

In general, though, I think it's a bad idea; if all you want to use the console for is to dump more information about your unit test, the output is there for you. Keep using Console.WriteLine the way you are, and check the output results in the Test Results window when it's done.

Copied from http://technet.microsoft.com/en-us/library/cc750354.aspx

What's FAT?

FAT may sound like a strange name for a file system, but it's actually an acronym for File Allocation Table. Introduced in 1981, FAT is ancient in computer terms. Because of its age, most operating systems, including Microsoft Windows NT®, Windows 98, the Macintosh OS, and some versions of UNIX, offer support for FAT.

The FAT file system limits filenames to the 8.3 naming convention, meaning that a filename can have no more than eight characters before the period and no more than three after. Filenames in a FAT file system must also begin with a letter or number, and they can't contain spaces. Filenames aren't case sensitive.

What About VFAT?

Perhaps you've also heard of a file system called VFAT. VFAT is an extension of the FAT file system and was introduced with Windows 95. VFAT maintains backward compatibility with FAT but relaxes the rules. For example, VFAT filenames can contain up to 255 characters, spaces, and multiple periods. Although VFAT preserves the case of filenames, it's not considered case sensitive.

When you create a long filename (longer than 8.3) with VFAT, the file system actually creates two different filenames. One is the actual long filename. This name is visible to Windows 95, Windows 98, and Windows NT (4.0 and later). The second filename is called an MS-DOS® alias. An MS-DOS alias is an abbreviated form of the long filename. The file system creates the MS-DOS alias by taking the first six characters of the long filename (not counting spaces), followed by the tilde [~] and a numeric trailer. For example, the filename Brien's Document.txt would have an alias of BRIEN'~1.txt.

An interesting side effect results from the way VFAT stores its long filenames. When you create a long filename with VFAT, it uses one directory entry for the MS-DOS alias and another entry for every 13 characters of the long filename. In theory, a single long filename could occupy up to 21 directory entries. The root directory has a limit of 512 files, but if you were to use the maximum length long filenames in the root directory, you could cut this limit to a mere 24 files. Therefore, you should use long filenames very sparingly in the root directory. Other directories aren't affected by this limit.

You may be wondering why we're discussing VFAT. The reason is it's becoming more common than FAT, but aside from the differences I mentioned above, VFAT has the same limitations. When you tell Windows NT to format a partition as FAT, it actually formats the partition as VFAT. The only time you'll have a true FAT partition under Windows NT 4.0 is when you use another operating system, such as MS-DOS, to format the partition.

FAT32

FAT32 is actually an extension of FAT and VFAT, first introduced with Windows 95 OEM Service Release 2 (OSR2). FAT32 greatly enhances the VFAT file system but it does have its drawbacks.

The greatest advantage to FAT32 is that it dramatically increases the amount of free hard disk space. To illustrate this point, consider that a FAT partition (also known as a FAT16 partition) allows only a certain number of clusters per partition. Therefore, as your partition size increases, the cluster size must also increase. For example, a 512-MB FAT partition has a cluster size of 8K, while a 2-GB partition has a cluster size of 32K.

This may not sound like a big deal until you consider that the FAT file system only works in single cluster increments. For example, on a 2-GB partition, a 1-byte file will occupy the entire cluster, thereby consuming 32K, or roughly 32,000 times the amount of space that the file should consume. This rule applies to every file on your hard disk, so you can see how much space can be wasted.

Converting a partition to FAT32 reduces the cluster size (and overcomes the 2-GB partition size limit). For partitions 8 GB and smaller, the cluster size is reduced to a mere 4K. As you can imagine, it's not uncommon to gain back hundreds of megabytes by converting a partition to FAT32, especially if the partition contains a lot of small files.

Note: This section of the quote/ article (1999) is out of date. Updated info quote below.

As I mentioned, FAT32 does have limitations. Unfortunately, it isn't compatible with any operating system other than Windows 98 and the OSR2 version of Windows 95. However, Windows 2000 will be able to read FAT32 partitions.

The other disadvantage is that your disk utilities and antivirus software must be FAT32-aware. Otherwise, they could interpret the new file structure as an error and try to correct it, thus destroying data in the process.

Finally, I should mention that converting to FAT32 is a one-way process. Once you've converted to FAT32, you can't convert the partition back to FAT16. Therefore, before converting to FAT32, you need to consider whether the computer will ever be used in a dual-boot environment. I should also point out that although other operating systems such as Windows NT can't directly read a FAT32 partition, they can read it across the network. Therefore, it's no problem to share information stored on a FAT32 partition with other computers on a network that run older operating systems.

Updated mentioned in comment by Doktor-J (assimilated to update out of date answer in case comment is ever lost):

I'd just like to point out that most modern operating systems (WinXP/Vista/7/8, MacOS X, most if not all Linux variants) can read FAT32, contrary to what the second-to-last paragraph suggests.

The original article was written in 1999, and being posted on a Microsoft website, probably wasn't concerned with non-Microsoft operating systems anyways.

The operating systems "excluded" by that paragraph are probably the original Windows 95, Windows NT 4.0, Windows 3.1, DOS, etc.

I think Todd is correct, but I think there's one other thing you should consider. You can reliably get the home directory from the JVM at runtime, and then you can create files objects relative to that location. It's not that much more trouble, and it's something you'll appreciate if you ever move to another computer or operating system.

File homedir = new File(System.getProperty("user.home"));
File fileToRead = new File(homedir, "java/ex.txt");

A key is just a normal index. A way over simplification is to think of it like a card catalog at a library. It points MySQL in the right direction.

A unique key is also used for improved searching speed, but it has the constraint that there can be no duplicated items (there are no two x and y where x is not y and x == y).

The manual explains it as follows:

A UNIQUE index creates a constraint such that all values in the index must be distinct. An error occurs if you try to add a new row with a key value that matches an existing row. This constraint does not apply to NULL values except for the BDB storage engine. For other engines, a UNIQUE index permits multiple NULL values for columns that can contain NULL. If you specify a prefix value for a column in a UNIQUE index, the column values must be unique within the prefix.

A primary key is a 'special' unique key. It basically is a unique key, except that it's used to identify something.

The manual explains how indexes are used in general: here.

In MSSQL, the concepts are similar. There are indexes, unique constraints and primary keys.

Untested, but I believe the MSSQL equivalent is:

CREATE TABLE tmp (
  id int NOT NULL PRIMARY KEY IDENTITY,
  uid varchar(255) NOT NULL CONSTRAINT uid_unique UNIQUE,
  name varchar(255) NOT NULL,
  tag int NOT NULL DEFAULT 0,
  description varchar(255),
);

CREATE INDEX idx_name ON tmp (name);
CREATE INDEX idx_tag ON tmp (tag);

Edit: the code above is tested to be correct; however, I suspect that there's a much better syntax for doing it. Been a while since I've used SQL server, and apparently I've forgotten quite a bit :).

Here is an example, you can modify the method to accept a string parameter. Then just save the image object with image.Save(...).

public Image LoadImage()
{
    //data:image/gif;base64,
    //this image is a single pixel (black)
    byte[] bytes = Convert.FromBase64String("R0lGODlhAQABAIAAAAAAAAAAACH5BAAAAAAALAAAAAABAAEAAAICTAEAOw==");

    Image image;
    using (MemoryStream ms = new MemoryStream(bytes))
    {
        image = Image.FromStream(ms);
    }

    return image;
}

It is possible to get an exception A generic error occurred in GDI+. when the bytes represent a bitmap. If this is happening save the image before disposing the memory stream (while still inside the using statement).

Another best way to find Java folder path is to use alternatives command in Fedora Linux (I know its for Ubuntu but I hit this post from google just by its headline). Just want to share incase people like me looking for answers for fedora flavour.

To display all information regarding java

alternatives --display java

For anybody coming here looking for Visual studio 2012:

Download and Install Reference Assistant for Visual Studio 11

Later you can do:

Json stands for JavaScript Object Notation really all json is are javascript objects so your array is in json form already. To write it out in a div you could do a bunch of things one of the easiest I think would be:

 objectDiv.innerHTML = filter;

where objectDiv is the div you want selected from the DOM using jquery. If you wanted to list parts of the array out you could access them since it is a javascript object like so:

 objectDiv.innerHTML = filter.dvals.valueToDisplay; //brand or count depending.

edit: anything you want to be a string but is not currently (which is rare javascript treats almost everything as a string) just use the toString() function built in. so line above if you needed it would be filter.dvals.valueToDisplay.toString();

second edit to clarify: this answer is in response to the OP's comments and not completely to his original question.

So If you present a view controller it will not show in navigation controller. It will just take complete screen. For this case you have to create another navigation controller and add your nextViewController as root for this and present this new navigationController.

Another way is to just push the view controller.

self.presentViewController(nextViewController, animated:true, completion:nil)

For more info check Apple documentation:- https://developer.apple.com/library/ios/documentation/UIKit/Reference/UIViewController_Class/#//apple_ref/doc/uid/TP40006926-CH3-SW96

Building on Piotr Tomasik's elegant solution: if you want to have a bit of spacing between the button label and image as well, then include that in your edge insets as follows (copying my code here that works perfectly for me):

    CGFloat spacing          = 3;
    CGFloat insetAmount      = 0.5 * spacing;

    // First set overall size of the button:
    button.contentEdgeInsets = UIEdgeInsetsMake(0, insetAmount, 0, insetAmount);
    [button sizeToFit];

    // Then adjust title and image insets so image is flipped to the right and there is spacing between title and image:
    button.titleEdgeInsets   = UIEdgeInsetsMake(0, -button.imageView.frame.size.width - insetAmount, 0,  button.imageView.frame.size.width  + insetAmount);
    button.imageEdgeInsets   = UIEdgeInsetsMake(0, button.titleLabel.frame.size.width + insetAmount, 0, -button.titleLabel.frame.size.width - insetAmount);

Thanks Piotr for your solution!

Erik

You could use std::numeric_limits<size_t>::max() for elements that was not found. It is a valid value, but it is impossible to create container with such max index. If std::vector has size equal to std::numeric_limits<size_t>::max(), then maximum allowed index will be (std::numeric_limits<size_t>::max()-1), since elements counted from 0.

ID provides a unique indentifier for the element, in case you want to manipulate it in JavaScript. The class attribute can be used to treat a group of HTML elements the same, particularly in regards to fonts, colors and other style properties...

This works on firefox 3.6.x and IE:

    function copyToClipboardCrossbrowser(s) {           
        s = document.getElementById(s).value;               

        if( window.clipboardData && clipboardData.setData )
        {
            clipboardData.setData("Text", s);
        }           
        else
        {
            // You have to sign the code to enable this or allow the action in about:config by changing
            //user_pref("signed.applets.codebase_principal_support", true);
            netscape.security.PrivilegeManager.enablePrivilege('UniversalXPConnect');

            var clip = Components.classes["@mozilla.org/widget/clipboard;1"].createInstance(Components.interfaces.nsIClipboard);
            if (!clip) return;

            // create a transferable

            var trans = Components.classes["@mozilla.org/widget/transferable;1"].createInstance(Components.interfaces.nsITransferable);
            if (!trans) return;

            // specify the data we wish to handle. Plaintext in this case.
            trans.addDataFlavor('text/unicode');

            // To get the data from the transferable we need two new objects
            var str = new Object();
            var len = new Object();

            var str = Components.classes["@mozilla.org/supports-string;1"].createInstance(Components.interfaces.nsISupportsString);

            str.data= s;        

            trans.setTransferData("text/unicode",str, str.data.length * 2);

            var clipid=Components.interfaces.nsIClipboard;              
            if (!clip) return false;
            clip.setData(trans,null,clipid.kGlobalClipboard);      
        }
    }

Here is an easier way you can write the time format (hh:mm:ss tt) and display them separately if you wish.

string time = DateTime.Now.Hour.ToString("00") + ":" + DateTime.Now.Minute.ToString("00") + ":" + DateTime.Now.Second.ToString("00") + DateTime.Now.ToString(" tt");

or just simply:

 DateTime.Now.ToString("hh:mm:ss tt")

<?php
/**
 * Singleton patter in php
 **/
trait SingletonTrait {
   protected static $inst = null;

  /**
   * call this method to get instance
   **/
   public static function getInstance(){
      if (static::$inst === null){
         static::$inst = new static();
      }
      return static::$inst;
  }

  /**
   * protected to prevent clonning 
   **/
  protected function __clone(){
  }

  /**
   * protected so no one else can instance it 
   **/
  protected function __construct(){
  }
}

to use:

/**
 *  example of class definitions using SingletonTrait
 */
class DBFactory {
  /**
   * we are adding the trait here 
   **/
   use SingletonTrait;

  /**
   * This class will have a single db connection as an example
   **/
  protected $db;


 /**
  * as an example we will create a PDO connection
  **/
  protected function __construct(){
    $this->db = 
        new PDO('mysql:dbname=foodb;port=3305;host=127.0.0.1','foouser','foopass');
  }
}
class DBFactoryChild extends DBFactory {
  /**
   * we repeating the inst so that it will differentiate it
   * from UserFactory singleton
   **/
   protected static $inst = null;
}


/**
 * example of instanciating the classes
 */
$uf0 = DBFactoryChild::getInstance();
var_dump($uf0);
$uf1 = DBFactory::getInstance();
var_dump($uf1);
echo $uf0 === $uf1;

respose:

object(DBFactoryChild)#1 (0) {
}
object(DBFactory)#2 (0) {
}

If you are using PHP 5.4: trait its an option, so you don't have to waste the inheritance hierarchy in order to have the Singleton pattern

and also notice that whether you use traits or extends Singleton class one loose end was to create singleton of child classes if you dont add the following line of code:

   protected static $inst = null;

in the child class

the unexpected result will be:

object(DBFactoryChild)#1 (0) {
}
object(DBFactoryChild)#1 (0) {
}

One simple way to do that is:

String url = "http://test.com/Services/rest/{id}/Identifier"

UriComponents uriComponents = UriComponentsBuilder.fromUriString(url).build();
uriComponents = uriComponents.expand(Collections.singletonMap("id", "1234"));

and then adds the query params.

Simple workaround is to open the file and simply press save button in Excel (no need to change the format). once saved in excel it will start to work and you should be able to see its sheets in the DFT.

BalusC gave a good description about the problem but it lacks a good end to end code that users can pick and test it for themselves.

Best practice is to always store date-time in UTC timezone in DB. Sql timestamp type does not have timezone info.

When writing datetime value to sql db

    //Convert the time into UTC and build Timestamp object.
    Timestamp ts = Timestamp.valueOf(LocalDateTime.now(ZoneId.of("UTC")));
    //use setTimestamp on preparedstatement
    preparedStatement.setTimestamp(1, ts);

When reading the value back from DB into java,

1. Read it as it is in java.sql.Timestamp type.
2. Decorate the DateTime value as time in UTC timezone using atZone method in LocalDateTime class.

3. Then, change it to your desired timezone. Here I am changing it to Toronto timezone.

   ResultSet resultSet = preparedStatement.executeQuery();
   resultSet.next();
   Timestamp timestamp = resultSet.getTimestamp(1);
   ZonedDateTime timeInUTC = timestamp.toLocalDateTime().atZone(ZoneId.of("UTC"));
   LocalDateTime timeInToronto = LocalDateTime.ofInstant(timeInUTC.toInstant(), ZoneId.of("America/Toronto"));
   

request.getContextPath()- returns root path of your application, while ../ - returns parent directory of a file.

You use request.getContextPath(), as it will always points to root of your application. If you were to move your jsp file from one directory to another, nothing needs to be changed. Now, consider the second approach. If you were to move your jsp files from one folder to another, you'd have to make changes at every location where you are referring your files.

Also, better approach of using request.getContextPath() will be to set 'request.getContextPath()' in a variable and use that variable for referring your path.

<c:set var="context" value="${pageContext.request.contextPath}" />
<script src="${context}/themes/js/jquery.js"></script>

PS- This is the one reason I can figure out. Don't know if there is any more significance to it.

I just added simple view to WindowManager with the following steps:

1. Create one layout file to show(dummy_layout in my case)
2. Add permission in manifest and dynamically.

// 1. Show view
private void showCustomPopupMenu()
{
    windowManager = (WindowManager)getSystemService(WINDOW_SERVICE);
    // LayoutInflater layoutInflater = (LayoutInflater)getSystemService(Context.LAYOUT_INFLATER_SERVICE);
    // View view = layoutInflater.inflate(R.layout.dummy_layout, null);
    ViewGroup valetModeWindow = (ViewGroup) View.inflate(this, R.layout.dummy_layout, null);
    int LAYOUT_FLAG;
    if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.O) {
        LAYOUT_FLAG = WindowManager.LayoutParams.TYPE_APPLICATION_OVERLAY;
    } else {
        LAYOUT_FLAG = WindowManager.LayoutParams.TYPE_PHONE;
    }
    WindowManager.LayoutParams params=new WindowManager.LayoutParams(
        WindowManager.LayoutParams.WRAP_CONTENT,
        WindowManager.LayoutParams.WRAP_CONTENT,
        LAYOUT_FLAG,
        WindowManager.LayoutParams.FLAG_NOT_FOCUSABLE,
        PixelFormat.TRANSLUCENT);

    params.gravity= Gravity.CENTER|Gravity.CENTER;
    params.x=0;
    params.y=0;
    windowManager.addView(valetModeWindow, params);
}

// 2. Get permissions by asking
if (!Settings.canDrawOverlays(this)) {
    Intent intent = new Intent(Settings.ACTION_MANAGE_OVERLAY_PERMISSION, Uri.parse("package:" + getPackageName()));
    startActivityForResult(intent, 1234);
}

With this you can add a view to WM.

Tested in Pie.

There is a much easier way to do without adding the CSS files and all the other methods suggested. But you have to do it every time you start the Jupiter notebook.

Go to inspect in your browser and click on the element selection icon and then click on the box. And at the bottom of the page, you will be seeing the styling option for CSS where you can easily change the font-size.

• A leading slash tells the browser to start at the root directory.
• If you don't have the leading slash, you're referencing from the current directory.
• If you add two dots before the leading slash, it means you're referencing the parent of the current directory.

Take the following folder structure

notice:

• the ROOT checkmark is green,
• the second checkmark is orange,
• the third checkmark is purple,
• the forth checkmark is yellow

Now in the index.html.en file you'll want to put the following markup

<p>
    <span>src="check_mark.png"</span>
    <img src="check_mark.png" />
    <span>I'm purple because I'm referenced from this current directory</span>
</p>

<p>
    <span>src="/check_mark.png"</span>
    <img src="/check_mark.png" />
    <span>I'm green because I'm referenced from the ROOT directory</span>
</p>

<p>
    <span>src="subfolder/check_mark.png"</span>
    <img src="subfolder/check_mark.png" />
    <span>I'm yellow because I'm referenced from the child of this current directory</span>
</p>

<p>
    <span>src="/subfolder/check_mark.png"</span>
    <img src="/subfolder/check_mark.png" />
    <span>I'm orange because I'm referenced from the child of the ROOT directory</span>
</p>

<p>
    <span>src="../subfolder/check_mark.png"</span>
    <img src="../subfolder/check_mark.png" />
    <span>I'm purple because I'm referenced from the parent of this current directory</span>
</p>

<p>
    <span>src="subfolder/subfolder/check_mark.png"</span>
    <img src="subfolder/subfolder/check_mark.png" />
    <span>I'm [broken] because there is no subfolder two children down from this current directory</span>
</p>

<p>
    <span>src="/subfolder/subfolder/check_mark.png"</span>
    <img src="/subfolder/subfolder/check_mark.png" />
    <span>I'm purple because I'm referenced two children down from the ROOT directory</span>
</p>

Now if you load up the index.html.en file located in the second subfolder
http://example.com/subfolder/subfolder/

This will be your output

Another way would be adding __getitem__, __setitem__ function

def __getitem__(self, key):
    return getattr(self, key)

You can use self[key] to access now.

upgraded MaxU's answer with MultiIndex support

def explode(df, lst_cols, fill_value='', preserve_index=False):
    """
    usage:
        In [134]: df
        Out[134]:
           aaa  myid        num          text
        0   10     1  [1, 2, 3]  [aa, bb, cc]
        1   11     2         []            []
        2   12     3     [1, 2]      [cc, dd]
        3   13     4         []            []

        In [135]: explode(df, ['num','text'], fill_value='')
        Out[135]:
           aaa  myid num text
        0   10     1   1   aa
        1   10     1   2   bb
        2   10     1   3   cc
        3   11     2
        4   12     3   1   cc
        5   12     3   2   dd
        6   13     4
    """
    # make sure `lst_cols` is list-alike
    if (lst_cols is not None
        and len(lst_cols) > 0
        and not isinstance(lst_cols, (list, tuple, np.ndarray, pd.Series))):
        lst_cols = [lst_cols]
    # all columns except `lst_cols`
    idx_cols = df.columns.difference(lst_cols)
    # calculate lengths of lists
    lens = df[lst_cols[0]].str.len()
    # preserve original index values    
    idx = np.repeat(df.index.values, lens)
    res = (pd.DataFrame({
                col:np.repeat(df[col].values, lens)
                for col in idx_cols},
                index=idx)
             .assign(**{col:np.concatenate(df.loc[lens>0, col].values)
                            for col in lst_cols}))
    # append those rows that have empty lists
    if (lens == 0).any():
        # at least one list in cells is empty
        res = (res.append(df.loc[lens==0, idx_cols], sort=False)
                  .fillna(fill_value))
    # revert the original index order
    res = res.sort_index()
    # reset index if requested
    if not preserve_index:        
        res = res.reset_index(drop=True)

    # if original index is MultiIndex build the dataframe from the multiindex
    # create "exploded" DF
    if isinstance(df.index, pd.MultiIndex):
        res = res.reindex(
            index=pd.MultiIndex.from_tuples(
                res.index,
                names=['number', 'color']
            )
    )
    return res

idTABLE.parentElement.innerHTML =  '<span>123 element</span> 456';

while this works, it's still recommended to use getElementById: Do DOM tree elements with ids become global variables?

replaceChild would work fine if you want to go to the trouble of building up your replacement, element by element, using document.createElement and appendChild, but I don't see the point.

Following code worked for me:

public function jsonSerialize()
{
    return get_object_vars($this);
}

You should downgrade to pgadmin3. It Worked for me on windows 10.1 with postrgreSQL 9.6.

Here a single line Solution:

((LinearLayout.LayoutParams) yourLinearLayout.getLayoutParams()).marginToAdd = ((int)(Resources.getSystem().getDisplayMetrics().density * yourDPValue));

I managed to reproduce this error by doing the following.

Connection 1 (leave running for a couple of minutes)

CREATE DATABASE TESTING123
GO

USE TESTING123;

SELECT NEWID() AS X INTO FOO
FROM sys.objects s1,sys.objects s2,sys.objects s3,sys.objects s4 ,sys.objects s5 ,sys.objects s6

Connections 2 and 3

set lock_timeout 5;

ALTER DATABASE TESTING123 SET SINGLE_USER WITH ROLLBACK IMMEDIATE;

There's nothing here explaining the use of multiple variables, so I'll chuck it in just incase someone needs it in the future.

You need to concatenate multiple variables:

header('Location: http://linkhere.com?var1='.$var1.'&var2='.$var2.'&var3'.$var3);

I know this is a really old thread, but it shows up at the top in Google, so here's another option.

This one is pure CSS, and doesn't require any extra HTML.

box-shadow: inset 0 0 0 1000px rgba(0,0,0,.2);

There are a surprising number of uses for the box-shadow feature.

Try the scrollTo plugin.

try a negative margin.

margin-top: -10px; /* as an example */

Try this:

created_at.strftime('%FT%T')

It's a time formatting function which provides you a way to present the string representation of the date. (http://ruby-doc.org/core-2.2.1/Time.html#method-i-strftime).

From APIdock:

%Y%m%d           => 20071119                  Calendar date (basic)
%F               => 2007-11-19                Calendar date (extended)
%Y-%m            => 2007-11                   Calendar date, reduced accuracy, specific month
%Y               => 2007                      Calendar date, reduced accuracy, specific year
%C               => 20                        Calendar date, reduced accuracy, specific century
%Y%j             => 2007323                   Ordinal date (basic)
%Y-%j            => 2007-323                  Ordinal date (extended)
%GW%V%u          => 2007W471                  Week date (basic)
%G-W%V-%u        => 2007-W47-1                Week date (extended)
%GW%V            => 2007W47                   Week date, reduced accuracy, specific week (basic)
%G-W%V           => 2007-W47                  Week date, reduced accuracy, specific week (extended)
%H%M%S           => 083748                    Local time (basic)
%T               => 08:37:48                  Local time (extended)
%H%M             => 0837                      Local time, reduced accuracy, specific minute (basic)
%H:%M            => 08:37                     Local time, reduced accuracy, specific minute (extended)
%H               => 08                        Local time, reduced accuracy, specific hour
%H%M%S,%L        => 083748,000                Local time with decimal fraction, comma as decimal sign (basic)
%T,%L            => 08:37:48,000              Local time with decimal fraction, comma as decimal sign (extended)
%H%M%S.%L        => 083748.000                Local time with decimal fraction, full stop as decimal sign (basic)
%T.%L            => 08:37:48.000              Local time with decimal fraction, full stop as decimal sign (extended)
%H%M%S%z         => 083748-0600               Local time and the difference from UTC (basic)
%T%:z            => 08:37:48-06:00            Local time and the difference from UTC (extended)
%Y%m%dT%H%M%S%z  => 20071119T083748-0600      Date and time of day for calendar date (basic)
%FT%T%:z         => 2007-11-19T08:37:48-06:00 Date and time of day for calendar date (extended)
%Y%jT%H%M%S%z    => 2007323T083748-0600       Date and time of day for ordinal date (basic)
%Y-%jT%T%:z      => 2007-323T08:37:48-06:00   Date and time of day for ordinal date (extended)
%GW%V%uT%H%M%S%z => 2007W471T083748-0600      Date and time of day for week date (basic)
%G-W%V-%uT%T%:z  => 2007-W47-1T08:37:48-06:00 Date and time of day for week date (extended)
%Y%m%dT%H%M      => 20071119T0837             Calendar date and local time (basic)
%FT%R            => 2007-11-19T08:37          Calendar date and local time (extended)
%Y%jT%H%MZ       => 2007323T0837Z             Ordinal date and UTC of day (basic)
%Y-%jT%RZ        => 2007-323T08:37Z           Ordinal date and UTC of day (extended)
%GW%V%uT%H%M%z   => 2007W471T0837-0600        Week date and local time and difference from UTC (basic)
%G-W%V-%uT%R%:z  => 2007-W47-1T08:37-06:00    Week date and local time and difference from UTC (extended)

diff a1.txt a2.txt | grep '> ' | sed 's/> //' > a3.txt

I tried almost all the answers in this thread, but none was complete. After few trails above one worked for me. diff will give you difference but with some unwanted special charas. where you actual difference lines starts with '> '. so next step is to grep lines starts with '> 'and followed by removing the same with sed.

Also ran into this error message, but the root cause was of a different flavor from those referenced in the other answers here.

Generic answer: Make sure that once hibernate loads an entity, no code changes the primary key value in that object in any way. When hibernate flushes all changes back to the database, it throws this exception because the primary key changed. If you don't do it explicitly, look for places where this may happen unintentionally, perhaps on related entities that only have LAZY loading configured.

In my case, I am using a mapping framework (MapStruct) to update an entity. In the process, also other referenced entities were being updates as mapping frameworks tend to do that by default. I was later replacing the original entity with new one (in DB terms, changed the value of the foreign key to reference a different row in the related table), the primary key of the previously-referenced entity was already updated, and hibernate attempted to persist this update on flush.

There is a null coalescing operator (??), but it would not handle empty strings.

If you were only interested in dealing with null strings, you would use it like

string output = somePossiblyNullString ?? "0";

For your need specifically, there is the conditional operator bool expr ? true_value : false_value that you can use to simplify if/else statement blocks that set or return a value.

string output = string.IsNullOrEmpty(someString) ? "0" : someString;

if you want to concatenate the string representation of the values of two variables, use the + sign :

var var1 = 1;
var var2 = "bob";
var var3 = var2 + var1;//=bob1

But if you want to keep the two in only one variable, but still be able to access them later, you could make an object container:

function Container(){
   this.variables = [];
}
Container.prototype.addVar = function(var){
   this.variables.push(var);
}
Container.prototype.toString = function(){
   var result = '';
   for(var i in this.variables)
       result += this.variables[i];
   return result;
}

var var1 = 1;
var var2 = "bob";
var container = new Container();
container.addVar(var2);
container.addVar(var1);
container.toString();// = bob1

the advantage is that you can get the string representation of the two variables, bit you can modify them later :

container.variables[0] = 3;
container.variables[1] = "tom";
container.toString();// = tom3

Without itertools as a flattened list:

[(list1[i], list2[j]) for i in range(len(list1)) for j in range(len(list2))]

or in Python 2:

[(list1[i], list2[j]) for i in xrange(len(list1)) for j in xrange(len(list2))]

I was recently working with IPFS and worked this out. A curl example for IPFS to upload a file looks like this:

curl -i -H "Content-Type: multipart/form-data; boundary=CUSTOM" -d $'--CUSTOM\r\nContent-Type: multipart/octet-stream\r\nContent-Disposition: file; filename="test"\r\n\r\nHello World!\n--CUSTOM--' "http://localhost:5001/api/v0/add"

The basic idea is that each part (split by string in boundary with --) has it's own headers (Content-Type in the second part, for example.) The FormData object manages all this for you, so it's a better way to accomplish our goals.

This translates to fetch API like this:

const formData = new FormData()
formData.append('blob', new Blob(['Hello World!\n']), 'test')

fetch('http://localhost:5001/api/v0/add', {
  method: 'POST',
  body: formData
})
.then(r => r.json())
.then(data => {
  console.log(data)
})

Here is complete example using NLog

using NLog;
using System;
using System.Windows;

namespace MyApp
{
    /// <summary>
    /// Interaction logic for App.xaml
    /// </summary>
    public partial class App : Application
    {
        private static Logger logger = LogManager.GetCurrentClassLogger();

        public App()
        {
            var currentDomain = AppDomain.CurrentDomain;
            currentDomain.UnhandledException += CurrentDomain_UnhandledException;
        }

        private void CurrentDomain_UnhandledException(object sender, UnhandledExceptionEventArgs e)
        {
            var ex = (Exception)e.ExceptionObject;
            logger.Error("UnhandledException caught : " + ex.Message);
            logger.Error("UnhandledException StackTrace : " + ex.StackTrace);
            logger.Fatal("Runtime terminating: {0}", e.IsTerminating);
        }        
    }


}

This is what i am using . change @screen-md-max for other sizes

/* Pull left in lg resolutions */
@media (min-width: @screen-md-max) {
    .pull-xs-right {
        float: right !important;
    }
    .pull-xs-left {
        float: left !important;
    }

    .radio-inline.pull-xs-left  + .radio-inline.pull-xs-left ,
    .checkbox-inline.pull-xs-left  + .checkbox-inline.pull-xs-left  {
        margin-left: 0;
    }
    .radio-inline.pull-xs-left, .checkbox-inline.pull-xs-left{
        margin-right: 10px;
    }
}

new Date(2015,1,3,15,30).toLocaleString()

//=> 2015-02-03 15:30:00

Its an old question I know but I did stumble across it so for future reference you can now do this:

pip uninstall [options] <package> ...
pip uninstall [options] -r <requirements file> ...

-r, --requirement file

Uninstall all the packages listed in the given requirements file. This option can be used multiple times.

from the pip documentation version 8.1

stdout is the standard output stream in UNIX. See http://www.gnu.org/software/libc/manual/html_node/Standard-Streams.html#Standard-Streams. When running in a terminal, you will see data written to stdout in the terminal and you can redirect it as you choose.

Use the following script.

<SCRIPT TYPE="text/javascript">
<!--
    function submitenter(myfield,e)
    {
        var keycode;
        if (window.event) keycode = window.event.keyCode;
        else if (e) keycode = e.which;
        else return true;

        if (keycode == 13)
        {
            myfield.form.submit();
            return false;
        }
        else
            return true;
    }
//-->
</SCRIPT>

For each field that should submit the form when the user hits enter, call the submitenter function as follows.

<FORM ACTION="../cgi-bin/formaction.pl">
    name:     <INPUT NAME=realname SIZE=15><BR>
    password: <INPUT NAME=password TYPE=PASSWORD SIZE=10
       onKeyPress="return submitenter(this,event)"><BR>
<INPUT TYPE=SUBMIT VALUE="Submit">
</FORM>

Yes, NSDictionary supports fast enumeration. With Objective-C 2.0, you can do this:

// To print out all key-value pairs in the NSDictionary myDict
for(id key in myDict)
    NSLog(@"key=%@ value=%@", key, [myDict objectForKey:key]);

The alternate method (which you have to use if you're targeting Mac OS X pre-10.5, but you can still use on 10.5 and iPhone) is to use an NSEnumerator:

NSEnumerator *enumerator = [myDict keyEnumerator];
id key;
// extra parens to suppress warning about using = instead of ==
while((key = [enumerator nextObject]))
    NSLog(@"key=%@ value=%@", key, [myDict objectForKey:key]);

I am using Eclipse mars, Hibernate 5.2.1, Jdk7 and Oracle 11g.

I get the same error when I run Hibernate code generation tool. I guess it is a versions issue due to I have solved it through choosing Hibernate version (5.1 to 5.0) in the type frame in my Hibernate console configuration.

This is extreme overkill for your purpose, but here's what I use:

var numberReSnippet = "(?:NaN|-?(?:(?:\\d+|\\d*\\.\\d+)(?:[E|e][+|-]?\\d+)?|Infinity))";
var matchOnlyNumberRe = new RegExp("^("+ numberReSnippet + ")$");

To my knowledge, this matches all the variations on numbers that Java and JavaScript will ever throw at you, including "-Infinity", "1e-24" and "NaN". It also matches numbers you might type, such as "-.5".

As written, reSnippet is designed to be dropped into other regular expressions, so you can extract (or avoid) numbers. Despite all the parentheses, it contains no capturing groups. Thus "matchOnlyNumberRe" matches only strings that are numbers, and has a capturing group for the entire string.

Here are the Jasmine tests, so you can see what it does and doesn't handle:

describe("Number Regex", function() {
    var re = new RegExp("^("+ numberReSnippet + ")$");
    it("Matches Java and JavaScript numbers", function() {
        expect(re.test(         "1")).toBe(true);
        expect(re.test(       "0.2")).toBe(true);
        expect(re.test(     "0.4E4")).toBe(true);  // Java-style
        expect(re.test(       "-55")).toBe(true);
        expect(re.test(      "-0.6")).toBe(true);
        expect(re.test(  "-0.77E77")).toBe(true);
        expect(re.test(      "88E8")).toBe(true);
        expect(re.test(       "NaN")).toBe(true);
        expect(re.test(  "Infinity")).toBe(true);
        expect(re.test( "-Infinity")).toBe(true);
        expect(re.test(     "1e+24")).toBe(true);  // JavaScript-style
    });
    it("Matches fractions with a leading decimal point", function() {
        expect(re.test(        ".3")).toBe(true);
        expect(re.test(       "-.3")).toBe(true);
        expect(re.test(     ".3e-4")).toBe(true);
    });
    it("Doesn't match non-numbers", function() {
        expect(re.test(         ".")).toBe(false);
        expect(re.test(        "9.")).toBe(false);
        expect(re.test(          "")).toBe(false);
        expect(re.test(         "E")).toBe(false);
        expect(re.test(       "e24")).toBe(false);
        expect(re.test(   "1e+24.5")).toBe(false);
        expect(re.test("-.Infinity")).toBe(false);
    });
});

Did you import it? Importing matplotlib is not enough.

>>> import matplotlib
>>> matplotlib.pyplot
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
AttributeError: 'module' object has no attribute 'pyplot'

but

>>> import matplotlib.pyplot
>>> matplotlib.pyplot

works.

pyplot is a submodule of matplotlib and not immediately imported when you import matplotlib.

The most common form of importing pyplot is

import matplotlib.pyplot as plt

Thus, your statements won't be too long, e.g.

plt.plot([1,2,3,4,5])

instead of

matplotlib.pyplot.plot([1,2,3,4,5])

And: pyplot is not a function, it's a module! So don't call it, use the functions defined inside this module instead. See my example above

You can use the following snippet code:

#include<stdio.h>
int main(int argc, char *argv[]){
    unsigned int i;
    printf("decimal  hexadecimal\n");
    for (i = 0; i <= 256; i+=16)
        printf("%04d     0x%04X\n", i, i);
    return 0;
}

It prints both decimal and hexadecimal numbers in 4 places with zero padding.

Matheus de Oliveira created handy functions for JSON CRUD operations in postgresql. They can be imported using the \i directive. Notice the jsonb fork of the functions if jsonb if your data type.

9.3 json https://gist.github.com/matheusoliveira/9488951

9.4 jsonb https://gist.github.com/inindev/2219dff96851928c2282

string.Format is your friend.

String.Format("{0:0.00}", 123.4567);      // "123.46"

With moment you can parse the date string you have:

var dt = moment(myDate.date, "YYYY-MM-DD HH:mm:ss")

That's for UTC, you'll have to convert the time zone from that point if you so desire.

Then you can get the day of the week:

dt.format('dddd');

Double check projects .net versions. Projects that referenced each other with different .net versions causes problems.

From Solaris 11.2 onwards you can indeed do this with the netstat command. Have a look here. The -u switch is what you are looking for.

If you are on a lower version of Solaris then - as others have pointed out - the Solaris way of doing this is some kind of script wrapper around pfiles command. Beware though that pfiles command halts the process for a split second in order to inspect it. For 99.9% of processes this is unimportant. Unfortunately we have a process that will give a core dump if it is hit with a pfiles command so we are a bit cautious about using the command. Your situation may be totally different if you are in the 99.9%, meaning you can safely use the pfiles command.

WHILE EXISTS (SELECT * FROM TableName WHERE Value <> 'abc1' AND Parameter1 = 'abc' AND Parameter2 = 123)
BEGIN
UPDATE TOP (1000) TableName
SET Value = 'abc1'
WHERE Parameter1 = 'abc' AND Parameter2 = 123 AND Value <> 'abc1'
END

Another excellent plugin: http://documentcloud.github.com/visualsearch/

I'll use a common example in biology; reconstructing a genome by making DNA samples.

De-novo assembly

To construct a genome from short reads, it's necessary to construct a graph of those reads. We do it by breaking the reads into k-mers and assemble them into a graph.

We can reconstruct the genome by visiting each node once as in the diagram. This is known as Hamiltonian path.

Unfortunately, constructing such path is NP-hard. It's not possible to derive an efficient algorithm for solving it. Instead, in bioinformatics we construct a Eulerian cycle where an edge represents an overlap.

tl;dr: You don't have to remove the slashes, you have nested JSON, and hence have to decode the JSON twice: DEMO (note I used double slashes in the example, because the JSON is inside a JS string literal).

I assume that your actual JSON looks like

{"data":"{\n \"taskNames\" : [\n \"01 Jan\",\n \"02 Jan\",\n \"03 Jan\",\n \"04 Jan\",\n \"05 Jan\",\n \"06 Jan\",\n \"07 Jan\",\n \"08 Jan\",\n \"09 Jan\",\n \"10 Jan\",\n \"11 Jan\",\n \"12 Jan\",\n \"13 Jan\",\n \"14 Jan\",\n \"15 Jan\",\n \"16 Jan\",\n \"17 Jan\",\n \"18 Jan\",\n \"19 Jan\",\n \"20 Jan\",\n \"21 Jan\",\n \"22 Jan\",\n \"23 Jan\",\n \"24 Jan\",\n \"25 Jan\",\n \"26 Jan\",\n \"27 Jan\"]}"}

I.e. you have a top level object with one key, data. The value of that key is a string containing JSON itself. This is usually because the server side code didn't properly create the JSON. That's why you see the \" inside the string. This lets the parser know that " is to be treated literally and doesn't terminate the string.

So you can either fix the server side code, so that you don't double encode the data, or you have to decode the JSON twice, e.g.

var data = JSON.parse(JSON.parse(json).data));

This is a simple benchmark:

require 'benchmark'

"test123" =~ /1/
=> 4
Benchmark.measure{ 1000000.times { "test123" =~ /1/ } }
=>   0.610000   0.000000   0.610000 (  0.578133)

"test123"[/1/]
=> "1"
Benchmark.measure{ 1000000.times { "test123"[/1/] } }
=>   0.718000   0.000000   0.718000 (  0.750010)

irb(main):019:0> "test123".match(/1/)
=> #<MatchData "1">
Benchmark.measure{ 1000000.times { "test123".match(/1/) } }
=>   1.703000   0.000000   1.703000 (  1.578146)

So =~ is faster but it depends what you want to have as a returned value. If you just want to check if the text contains a regex or not use =~

There's an illegal character at index 16. I'd say it doesn't like the space in the path. You can percent encode special characters like spaces. Replace it with a %20 in this case.

The question I linked to above suggests using URLEncoder:

String thePath = "file://E:/Program Files/IBM/SDP/runtimes/base";
thePath = URLEncoder.encode(thePath, "UTF-8"); 

How I solved my problem.

I had

?useUnicode=true&characterEncoding=UTF-8

In my hibernate jdbc connection url and I changed the string datatype to longtext in database, which was varchar before.

Try (untested):

$.getJSON("data.php", function(data){
    $.each(data.justIn, function() {
        $.each(this, function(k, v) {
            alert(k + ' ' + v);
        });
    });
    $.each(data.recent, function() {
        $.each(this, function(k, v) {
            alert(k + ' ' + v);
        });
    });
    $.each(data.old, function() {
        $.each(this, function(k, v) {
            alert(k + ' ' + v);
        });
    });    
});

I figured, three separate loops since you'll probably want to treat each dataset differently (justIn, recent, old). If not, you can do:

$.getJSON("data.php", function(data){
    $.each(data, function(k, v) {
        alert(k + ' ' + v);
        $.each(v, function(k1, v1) {
            alert(k1 + ' ' + v1);
        });
    });
}); 

You can simply define the key to use directly when running the command:

ansible-playbook \
        \ # Super verbose output incl. SSH-Details:
    -vvvv \
        \ # The Server to target: (Keep the trailing comma!)
    -i "000.000.0.000," \
        \ # Define the key to use:
    --private-key=~/.ssh/id_rsa_ansible \
        \ # The `env` var is needed if `python` is not available:
    -e 'ansible_python_interpreter=/usr/bin/python3' \ # Needed if `python` is not available
        \ # Dry–Run:
    --check \
    deploy.yml

Copy/ Paste:

ansible-playbook -vvvv --private-key=/Users/you/.ssh/your_key deploy.yml

Answering exactly what was asked:

hash = {"_id"=>"4de7140772f8be03da000018"}
hash.transform_keys { |key| key[1..] }
# => {"id"=>"4de7140772f8be03da000018"}

The method transform_keys exists in the Hash class since Ruby version 2.5.

https://blog.bigbinary.com/2018/01/09/ruby-2-5-adds-hash-transform_keys-method.html

I am not sure if I fully understand your problem but since I had similar issue recently I will try to help you out.

Vendor bundle.

You should use CommonsChunkPlugin for that. in the configuration you specify the name of the chunk (e.g. vendor), and file name that will be generated (vendor.js).

new webpack.optimize.CommonsChunkPlugin("vendor", "vendor.js", Infinity),

Now important part, you have to now specify what does it mean vendor library and you do that in an entry section. One one more item to entry list with the same name as the name of the newly declared chunk (i.e. 'vendor' in this case). The value of that entry should be the list of all the modules that you want to move to vendor bundle. in your case it should look something like:

entry: {
    app: 'entry.js',
    vendor: ['jquery', 'jquery.plugin1']
}

JQuery as global

Had the same problem and solved it with ProvidePlugin. here you are not defining global object but kind of shurtcuts to modules. i.e. you can configure it like that:

new webpack.ProvidePlugin({
    $: "jquery"
})

And now you can just use $ anywhere in your code - webpack will automatically convert that to

require('jquery')

I hope it helped. you can also look at my webpack configuration file that is here

I love webpack, but I agree that the documentation is not the nicest one in the world... but hey.. people were saying same thing about Angular documentation in the begining :)

Edit:

To have entrypoint-specific vendor chunks just use CommonsChunkPlugins multiple times:

new webpack.optimize.CommonsChunkPlugin("vendor-page1", "vendor-page1.js", Infinity),
new webpack.optimize.CommonsChunkPlugin("vendor-page2", "vendor-page2.js", Infinity),

and then declare different extenral libraries for different files:

entry: {
    page1: ['entry.js'],
    page2: ['entry2.js'],
    "vendor-page1": [
        'lodash'
    ],
    "vendor-page2": [
        'jquery'
    ]
},

If some libraries are overlapping (and for most of them) between entry points then you can extract them to common file using same plugin just with different configuration. See this example.

On python 3.6 with django 2.0, decode on a byte literal does not works as expected. Yeah i get the right result when i print it, but the b'value' is still there even if you print it right.

This is what im encoding

uid': urlsafe_base64_encode(force_bytes(user.pk)),

This is what im decoding:

uid = force_text(urlsafe_base64_decode(uidb64))

This is what django 2.0 says :

urlsafe_base64_encode(s)[source]

Encodes a bytestring in base64 for use in URLs, stripping any trailing equal signs.

urlsafe_base64_decode(s)[source]

Decodes a base64 encoded string, adding back any trailing equal signs that might have been stripped.

This is my account_activation_email_test.html file

{% autoescape off %}
Hi {{ user.username }},

Please click on the link below to confirm your registration:

http://{{ domain }}{% url 'accounts:activate' uidb64=uid token=token %}
{% endautoescape %}

This is my console response:

Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Subject: Activate Your MySite Account From: webmaster@localhost To: [email protected] Date: Fri, 20 Apr 2018 06:26:46 -0000 Message-ID: <152420560682.16725.4597194169307598579@Dash-U>

Hi testuser,

Please click on the link below to confirm your registration:

http://127.0.0.1:8000/activate/b'MjU'/4vi-fasdtRf2db2989413ba/

as you can see uid = b'MjU'

expected uid = MjU

test in console:

$ python
Python 3.6.4 (default, Apr  7 2018, 00:45:33) 
[GCC 5.4.0 20160609] on linux
Type "help", "copyright", "credits" or "license" for more information.
>>> from django.utils.http import urlsafe_base64_encode, urlsafe_base64_decode
>>> from django.utils.encoding import force_bytes, force_text
>>> var1=urlsafe_base64_encode(force_bytes(3))
>>> print(var1)
b'Mw'
>>> print(var1.decode())
Mw
>>> 

After investigating it seems like its related to python 3. My workaround was quite simple:

'uid': user.pk,

i receive it as uidb64 on my activate function:

user = User.objects.get(pk=uidb64)

and voila:

Content-Transfer-Encoding: 7bit
Subject: Activate Your MySite Account
From: webmaster@localhost
To: [email protected]
Date: Fri, 20 Apr 2018 20:44:46 -0000
Message-ID: <152425708646.11228.13738465662759110946@Dash-U>


Hi testuser,

Please click on the link below to confirm your registration:

http://127.0.0.1:8000/activate/45/4vi-3895fbb6b74016ad1882/

now it works fine. :)

For now, use an EditText. Use android:inputType="number" to force it to be numeric. Convert the resulting string into an integer (e.g., Integer.parseInt(myEditText.getText().toString())).

In the future, you might consider a NumberPicker widget, once that becomes available (slated to be in Honeycomb).

def my_string = "some string"
println "here: " + my_string 

Not quite sure why the answer above needs to go into benchmarks, string buffers, tests, etc.

Try This:)

before:-

<servlet>
    <servlet-name>TestServlet</servlet-name>
    <servlet-class>TestServlet</servlet-class>  
</servlet>

After:-

 <servlet>
    <servlet-name>TestServlet</servlet-name>
    <servlet-class>operation.TestServlet</servlet-class>
 </servlet>

You can't close sockets on your server without owning those sockets hence you can't actually close the socket down without having code running in the process that owns the server socket.

However, there is another option which is telling the client to close its socket. Sending a RST TCP packet to the port the client is connecting on will cause the client to drop their connection. You can do that with RST scanning using nmap.

http://nmap.org/

The same as David's, but without attr()

$('<input>', {
    type: 'hidden',
    id: 'foo',
    name: 'foo',
    value: 'bar'
}).appendTo('form');

Just in case if anyone is interested in labeling horizontal barplot graph, I modified Sharon's answer as below:

def show_values_on_bars(axs, h_v="v", space=0.4):
    def _show_on_single_plot(ax):
        if h_v == "v":
            for p in ax.patches:
                _x = p.get_x() + p.get_width() / 2
                _y = p.get_y() + p.get_height()
                value = int(p.get_height())
                ax.text(_x, _y, value, ha="center") 
        elif h_v == "h":
            for p in ax.patches:
                _x = p.get_x() + p.get_width() + float(space)
                _y = p.get_y() + p.get_height()
                value = int(p.get_width())
                ax.text(_x, _y, value, ha="left")

    if isinstance(axs, np.ndarray):
        for idx, ax in np.ndenumerate(axs):
            _show_on_single_plot(ax)
    else:
        _show_on_single_plot(axs)

Two parameters explained:

h_v - Whether the barplot is horizontal or vertical. "h" represents the horizontal barplot, "v" represents the vertical barplot.

space - The space between value text and the top edge of the bar. Only works for horizontal mode.

Example:

show_values_on_bars(sns_t, "h", 0.3)

MSYS has not been updated a long time, MSYS2 is more active, you can download from MSYS2, it has both mingw and cygwin fork package.

To install the MinGW-w64 toolchain (Reference):

1. Open MSYS2 shell from start menu
2. Run pacman -Sy pacman to update the package database
3. Re-open the shell, run pacman -Syu to update the package database and core system packages
4. Re-open the shell, run pacman -Su to update the rest
5. Install compiler:
   • For 32-bit target, run pacman -S mingw-w64-i686-toolchain
   • For 64-bit target, run pacman -S mingw-w64-x86_64-toolchain
6. Select which package to install, default is all
7. You may also need make, run pacman -S make

you cannot see the groupBy data directly by print statement but you can see by iterating over the group using for loop try this code to see the group by data

group = df.groupby('A') #group variable contains groupby data
for A,A_df in group: # A is your column and A_df is group of one kind at a time
  print(A)
  print(A_df)

you will get an output after trying this as a groupby result

I hope it helps

I try to keep my dependencies to a minimum, so I implemented this myself instead of going with EventToCommand of MVVMLight. Works for me so far, but feedback is welcome.

Xaml:

<i:Interaction.Behaviors>
    <beh:EventToCommandBehavior Command="{Binding DropCommand}" Event="Drop" PassArguments="True" />
</i:Interaction.Behaviors>

ViewModel:

public ActionCommand<DragEventArgs> DropCommand { get; private set; }

this.DropCommand = new ActionCommand<DragEventArgs>(OnDrop);

private void OnDrop(DragEventArgs e)
{
    // ...
}

EventToCommandBehavior:

/// <summary>
/// Behavior that will connect an UI event to a viewmodel Command,
/// allowing the event arguments to be passed as the CommandParameter.
/// </summary>
public class EventToCommandBehavior : Behavior<FrameworkElement>
{
    private Delegate _handler;
    private EventInfo _oldEvent;

    // Event
    public string Event { get { return (string)GetValue(EventProperty); } set { SetValue(EventProperty, value); } }
    public static readonly DependencyProperty EventProperty = DependencyProperty.Register("Event", typeof(string), typeof(EventToCommandBehavior), new PropertyMetadata(null, OnEventChanged));

    // Command
    public ICommand Command { get { return (ICommand)GetValue(CommandProperty); } set { SetValue(CommandProperty, value); } }
    public static readonly DependencyProperty CommandProperty = DependencyProperty.Register("Command", typeof(ICommand), typeof(EventToCommandBehavior), new PropertyMetadata(null));

    // PassArguments (default: false)
    public bool PassArguments { get { return (bool)GetValue(PassArgumentsProperty); } set { SetValue(PassArgumentsProperty, value); } }
    public static readonly DependencyProperty PassArgumentsProperty = DependencyProperty.Register("PassArguments", typeof(bool), typeof(EventToCommandBehavior), new PropertyMetadata(false));


    private static void OnEventChanged(DependencyObject d, DependencyPropertyChangedEventArgs e)
    {
        var beh = (EventToCommandBehavior)d;

        if (beh.AssociatedObject != null) // is not yet attached at initial load
            beh.AttachHandler((string)e.NewValue);
    }

    protected override void OnAttached()
    {
        AttachHandler(this.Event); // initial set
    }

    /// <summary>
    /// Attaches the handler to the event
    /// </summary>
    private void AttachHandler(string eventName)
    {
        // detach old event
        if (_oldEvent != null)
            _oldEvent.RemoveEventHandler(this.AssociatedObject, _handler);

        // attach new event
        if (!string.IsNullOrEmpty(eventName))
        {
            EventInfo ei = this.AssociatedObject.GetType().GetEvent(eventName);
            if (ei != null)
            {
                MethodInfo mi = this.GetType().GetMethod("ExecuteCommand", BindingFlags.Instance | BindingFlags.NonPublic);
                _handler = Delegate.CreateDelegate(ei.EventHandlerType, this, mi);
                ei.AddEventHandler(this.AssociatedObject, _handler);
                _oldEvent = ei; // store to detach in case the Event property changes
            }
            else
                throw new ArgumentException(string.Format("The event '{0}' was not found on type '{1}'", eventName, this.AssociatedObject.GetType().Name));
        }
    }

    /// <summary>
    /// Executes the Command
    /// </summary>
    private void ExecuteCommand(object sender, EventArgs e)
    {
        object parameter = this.PassArguments ? e : null;
        if (this.Command != null)
        {
            if (this.Command.CanExecute(parameter))
                this.Command.Execute(parameter);
        }
    }
}

ActionCommand:

public class ActionCommand<T> : ICommand
{
    public event EventHandler CanExecuteChanged;
    private Action<T> _action;

    public ActionCommand(Action<T> action)
    {
        _action = action;
    }

    public bool CanExecute(object parameter) { return true; }

    public void Execute(object parameter)
    {
        if (_action != null)
        {
            var castParameter = (T)Convert.ChangeType(parameter, typeof(T));
            _action(castParameter);
        }
    }
}

Try to format your date with the Z or z timezone flags:

new SimpleDateFormat("MM/dd/yyyy KK:mm:ss a Z").format(dateObj);

There is no concept of interface in C++,
You can simulate the behavior using an Abstract class.
Abstract class is a class which has atleast one pure virtual function, One cannot create any instances of an abstract class but You could create pointers and references to it. Also each class inheriting from the abstract class must implement the pure virtual functions in order that it's instances can be created.

Better Way to Provide Choice inside a django Model :

from django.db import models

class Student(models.Model):
    FRESHMAN = 'FR'
    SOPHOMORE = 'SO'
    JUNIOR = 'JR'
    SENIOR = 'SR'
    GRADUATE = 'GR'
    YEAR_IN_SCHOOL_CHOICES = [
        (FRESHMAN, 'Freshman'),
        (SOPHOMORE, 'Sophomore'),
        (JUNIOR, 'Junior'),
        (SENIOR, 'Senior'),
        (GRADUATE, 'Graduate'),
    ]
    year_in_school = models.CharField(
        max_length=2,
        choices=YEAR_IN_SCHOOL_CHOICES,
        default=FRESHMAN,
    )

Another way to do this without jQuery would be to use Greensock's TweenLite JS library.

Demo http://codepen.io/anon/pen/yNWwEJ

var display = document.getElementById("display");
var number = {param:0};
var duration = 1;

function count() {
  TweenLite.to(number, duration, {param:"+=20", roundProps:"param",
  onUpdate:update, onComplete:complete, ease:Linear.easeNone});
}

function update() {
  display.innerHTML = number.param;
}

function complete() {
  //alert("Complete");
}

count();

If you wish to log all output to a file AND output it to a text file then you can do the following. It's a bit hacky but it works:

import logging
debug = input("Debug or not")
if debug == "1":
    logging.basicConfig(level=logging.DEBUG, filename='./OUT.txt')
    old_print = print
    def print(string):
        old_print(string)
        logging.info(string)
print("OMG it works!")

EDIT: Note that this does not log errors unless you redirect sys.stderr to sys.stdout

EDIT2: A second issue is that you have to pass 1 argument unlike with the builtin function.

EDIT3: See the code before to write stdin and stdout to console and file with stderr only going to file

import logging, sys
debug = input("Debug or not")
if debug == "1":
    old_input = input
    sys.stderr.write = logging.info
    def input(string=""):
        string_in = old_input(string)
        logging.info("STRING IN " + string_in)
        return string_in
    logging.basicConfig(level=logging.DEBUG, filename='./OUT.txt')
    old_print = print
    def print(string="", string2=""):
        old_print(string, string2)
        logging.info(string)
        logging.info(string2)
print("OMG")
b = input()
print(a) ## Deliberate error for testing

You can also use System.lineSeparator():

String x = "Hello," + System.lineSeparator() + "there";

The project npm-install-peers will detect peers and install them.

As of v1.0.1 it doesn't support writing back to the package.json automatically, which would essentially solve our need here.

Please add your support to issue in flight: https://github.com/spatie/npm-install-peers/issues/4

referencing to @David answer:

When You want to do soo with another function, eg. html() like in my case, don't forget to add return in new function:

(function() {
    var ev = new $.Event('html'),
        orig = $.fn.html;
    $.fn.html = function() {
        $(this).trigger(ev);
        return orig.apply(this, arguments);
    }
})();

Check the Target framework. changed target framework from .NET framework 4.6.1 to .NET framework 4.6 has worked for me.

The task must be configured in two steps.

First you create a simple task that start at 0:00, every day. Then, you go in Advanced... (or similar depending on the operating system you are on) and select the Repeat every X minutes option for 24 hours.

The key here is to find the advanced properties. If you are using the XP wizard, it will only offer you to launch the advanced dialog once you created the task.

On more recent versions of Windows (7+ I think?):

1. Double click the task and a property window will show up.
2. Click the Triggers tab.
3. Double click the trigger details and the Edit Trigger window will show up.
4. Under Advanced settings panel, tick Repeat task every xxx minutes, and set Indefinitely if you need.
5. Finally, click ok.

you just have to change the name of your input filed because same name is required in parameter and input field name just replace this line Your code working fine

 <input type="file" name="file" />

It's maybe a better practice not to JS-scope the document's width but some sort of change made by css @media query. With this method you can be sure the JQuery function and css change happens at the same time.

css:

#isthin {
    display: inline-block;
    content: '';
    width: 1px;
    height: 1px;
    overflow: hidden;
}

@media only screen and (max-width: 990px) {
    #isthin {
        display: none;
    }
}

jquery:

$(window).ready(function(){
    isntMobile = $('#isthin').is(":visible");
    ...
});

$(window).resize(function(){
    isntMobile = $('#isthin').is(":visible");
    ...
});

This works! https://reacttraining.com/react-router/web/api/withRouter

import { withRouter } from 'react-router-dom';

class MyComponent extends React.Component {
  render () {
    this.props.history;
  }
}

withRouter(MyComponent);

It depends on the shell (and its configuration) in standard bash only the command is stored without the date and time (check .bash_history if there is any timestamp there).

To have bash store the timestamp you need to set HISTTIMEFORMAT before executing the commands, e.g. in .bashrc or .bash_profile. This will cause bash to store the timestamps in .bash_history (see the entries starting with #).

function GetURLParameter(parameter) {
        var url;
        var search;
        var parsed;
        var count;
        var loop;
        var searchPhrase;
        url = window.location.href;
        search = url.indexOf("?");
        if (search < 0) {
            return "";
        }
        searchPhrase = parameter + "=";
        parsed = url.substr(search+1).split("&");
        count = parsed.length;
        for(loop=0;loop<count;loop++) {
            if (parsed[loop].substr(0,searchPhrase.length)==searchPhrase) {
                return decodeURI(parsed[loop].substr(searchPhrase.length));
            }
        }
        return "";
    }

I came across this error message through a silly mistake. A classic example of Python giving you plenty of room to make a fool of yourself. Observe:

class DOH(object):
def __init__(self, property=None):
    self.property=property

def property():
    return property

x = DOH(1)
print(x.property())

Results

$ python3 t.py
Traceback (most recent call last):
  File "t.py", line 9, in <module>
    print(x.property())
TypeError: 'int' object is not callable

The problem here of course is that the function is overwritten with a property.

When setting the date, the date converts to milliseconds, so you need to convert it back to a date:

This method also take into consideration, new year change etc.

function addDays( date, days ) {
    var dateInMs = date.setDate(date.getDate() - days);
    return new Date(dateInMs);
}

var date_from = new Date();
var date_to = addDays( new Date(), parseInt(days) );

svn delete --keep-local the_file

I had this problem as well. I found out that having a $(document).ready function that included a $.cookie in a script tag inside body while having cookie js load in the head BELOW jquery as intended resulted in $(document).ready beeing processed before the cookie plugin could finish loading.

I moved the cookie plugin load script in the body before the $(document).ready script and the error disappeared :D

#import <QuickLook/QuickLook.h>
#import "ViewController.h"

@implementation ViewController

- (void)viewDidLoad
{
    [super viewDidLoad];

    QLPreviewController *preview = [[QLPreviewController alloc] init];
    preview.dataSource = self;

    [self addChildViewController:preview];
    [self.view addSubview:preview.view];
}

#pragma mark - QLPreviewControllerDataSource

- (NSInteger)numberOfPreviewItemsInPreviewController:(QLPreviewController *)previewController
{
    return 1;
}

- (id)previewController:(QLPreviewController *)previewController previewItemAtIndex:(NSInteger)idx
{
    NSURL *fileURL = [NSURL fileURLWithPath:[[NSBundle mainBundle] pathForResource:@"myanimated.gif" ofType:nil]];
    return fileURL;
}

@end

You can use Reflections framework for this

import static org.reflections.ReflectionUtils.*;
Set<Method> getters = ReflectionUtils.getAllMethods(someClass,
      withModifier(Modifier.PUBLIC), withPrefix("get"), withAnnotation(annotation));

Use the join method from the Array type.

a.value = [a, b, c, d, e, f];
var stringValueYouWant = a.join();

The join method will return a string that is the concatenation of all the array elements. It will use the first parameter you pass as a separator - if you don't use one, it will use the default separator, which is the comma.

You can use my script from CodePen by just wrapping all the content within a .levit-container DIV.

~function  () {
    function Smooth () {
        this.$container = document.querySelector('.levit-container');
        this.$placeholder = document.createElement('div');
    }

    Smooth.prototype.init = function () {
        var instance = this;

        setContainer.call(instance);
        setPlaceholder.call(instance);
        bindEvents.call(instance);
    }

    function bindEvents () {
        window.addEventListener('scroll', handleScroll.bind(this), false);
    }

    function setContainer () {
        var style = this.$container.style;

        style.position = 'fixed';
        style.width = '100%';
        style.top = '0';
        style.left = '0';
        style.transition = '0.5s ease-out';
    }

    function setPlaceholder () {
        var instance = this,
                $container = instance.$container,
                $placeholder = instance.$placeholder;

        $placeholder.setAttribute('class', 'levit-placeholder');
        $placeholder.style.height = $container.offsetHeight + 'px';
        document.body.insertBefore($placeholder, $container);
    }

    function handleScroll () {
        this.$container.style.transform = 'translateZ(0) translateY(' + (window.scrollY * (- 1)) + 'px)';
    }

    var smooth = new Smooth();
    smooth.init();
}();

https://codepen.io/acauamontiel/pen/zxxebb?editors=0010

SELECT @i:=@i+1 AS iterator, t.*
FROM tablename t,(SELECT @i:=0) foo

You can use display: inline-block.

Neither is better than the other, they do exactly the same thing. However, using .encode() and .decode() is the more common way to do it. It is also compatible with Python 2.

If you want to find a specific user's home directory, I don't believe you can do it directly.

When I've needed to do this before from Java I had to write some JNI native code that wrapped the UNIX getpwXXX() family of calls.

In Python version 3.6 and above you can use f-string to format result.

str = "hello world"
print(" ".join(f"{ord(i):08b}" for i in str))

01101000 01100101 01101100 01101100 01101111 00100000 01110111 01101111 01110010 01101100 01100100

• The left side of the colon, ord(i), is the actual object whose value will be formatted and inserted into the output. Using ord() gives you the base-10 code point for a single str character.

• The right hand side of the colon is the format specifier. 08 means width 8, 0 padded, and the b functions as a sign to output the resulting number in base 2 (binary).