You can use the OfType operator. It ignores null values in the source sequence. Just use the same type as MyProperty and it won't filter out anything else.

// given:
// public T MyProperty { get; }
var nonNullItems = list.Select(x => x.MyProperty).OfType<T>();

I would advise against this though. If you want to pick non-null values, what can be more explicit than saying you want "the MyProperties from the list that are not null"?

Put parentheses around the "OR"s:

SELECT ads.*, location.county 
FROM ads
LEFT JOIN location ON location.county = ads.county_id
WHERE ads.published = 1 
AND ads.type = 13
AND
(
    ads.county_id = 2
    OR ads.county_id = 5
    OR ads.county_id = 7
    OR ads.county_id = 9
)

Or even better, use IN:

SELECT ads.*, location.county 
FROM ads
LEFT JOIN location ON location.county = ads.county_id
WHERE ads.published = 1 
AND ads.type = 13
AND ads.county_id IN (2, 5, 7, 9)

Is this what you are after? Just index the element and assign a new value.

A[2,1]=150

A
Out[345]: 
array([[ 1,  2,  3,  4],
       [ 5,  6,  7,  8],
       [ 9, 150, 11, 12],
       [13, 14, 15, 16]])

Code based on Tolli's answer.

#decorator, modyfies new_cls
def _singleton(new_cls):
    instance = new_cls()                                              #2
    def new(cls):
        if isinstance(instance, cls):                                 #4
            return instance
        else:
            raise TypeError("I can only return instance of {}, caller wanted {}".format(new_cls, cls))
    new_cls.__new__  = new                                            #3
    new_cls.__init__ = lambda self: None                              #5
    return new_cls


#decorator, creates new class
def singleton(cls):
    new_cls = type('singleton({})'.format(cls.__name__), (cls,), {} ) #1
    return _singleton(new_cls)


#metaclass
def meta_singleton(name, bases, attrs):
    new_cls = type(name, bases, attrs)                                #1
    return _singleton(new_cls)

Explanation:

1. Create new class, inheriting from given cls
   (it doesn't modify cls in case someone wants for example singleton(list))

2. Create instance. Before overriding __new__ it's so easy.

3. Now, when we have easily created instance, overrides __new__ using method defined moment ago.

4. The function returns instance only when it's what the caller expects, otherwise raises TypeError.
   The condition is not met when someone attempts to inherit from decorated class.

5. If __new__() returns an instance of cls, then the new instance’s __init__() method will be invoked like __init__(self[, ...]), where self is the new instance and the remaining arguments are the same as were passed to __new__().

   instance is already initialized, so function replaces __init__ with function doing nothing.

See it working online

Another option is to add another tag with flex: auto style in between your tags that you want to fill in the remaining space.

https://jsfiddle.net/tsey5qu4/

The HTML:

<div class="parent">
  <div class="left">Left</div>
  <div class="fill-remaining-space"></div>
  <div class="right">Right</div>
</div>

The CSS:

.fill-remaining-space {
  flex: auto;
}

This is equivalent to flex: 1 1 auto, which absorbs any extra space along the main axis.

In my case it happened for leaving some empty intent-filter inside the Activity tag

    <activity
            android:name=".MainActivity"
            android:label="@string/app_name"
            android:theme="@style/AppTheme.NoActionBar">

            <intent-filter>

            </intent-filter>

    </activity> 

So just removing them solved the problem.

    <activity
            android:name=".MainActivity"
            android:label="@string/app_name"
            android:theme="@style/AppTheme.NoActionBar">
    </activity> 

Putting div inside a td made it work for me.

<table width="100%">
    <tr><td><div style="font-size:2px; height:2px; vertical-align:middle;">&nbsp;</div></td></tr>

It prompted me for password.

It shouldn't.
If you have the right public/private key representing a user authorized to access project-x, then gitlab won't ask you for anything.

But that supposes that ssh -vT [email protected] is working first.

Try to disable SElinux or configuration virtualhost for SElinux

to configuration with SElinux https://muchbits.com/apache-selinux-vhosts.html

to disable SElinux https://linuxize.com/post/how-to-disable-selinux-on-centos-7/

just add intent-filter Tag inside your activity

for example ::

    <activity
        android:name=".activityName">
        <intent-filter>
            <category android:name="android.intent.category.LAUNCHER" />
        </intent-filter>
    </activity>

SQL injection can be a tricky problem but there are ways around it. Your risk is reduced your risk simply by using an ORM like Linq2Entities, Linq2SQL, NHibrenate. However you can have SQL injection problems even with them.

The main thing with SQL injection is user controlled input (as is with XSS). In the most simple example if you have a login form (I hope you never have one that just does this) that takes a username and password.

SELECT * FROM Users WHERE Username = '" + username + "' AND password = '" + password + "'"

If a user were to input the following for the username Admin' -- the SQL Statement would look like this when executing against the database.

SELECT * FROM Users WHERE Username = 'Admin' --' AND password = ''

In this simple case using a paramaterized query (which is what an ORM does) would remove your risk. You also have a the issue of a lesser known SQL injection attack vector and that's with stored procedures. In this case even if you use a paramaterized query or an ORM you would still have a SQL injection problem. Stored procedures can contain execute commands, and those commands themselves may be suceptable to SQL injection attacks.

CREATE PROCEDURE SP_GetLogin @username varchar(100), @password varchar(100) AS
DECLARE @sql nvarchar(4000)
SELECT @sql = ' SELECT * FROM users' +
              ' FROM Product Where username = ''' + @username + ''' AND password = '''+@password+''''

EXECUTE sp_executesql @sql

So this example would have the same SQL injection problem as the previous one even if you use paramaterized queries or an ORM. And although the example seems silly you'd be surprised as to how often something like this is written.

My recommendations would be to use an ORM to immediately reduce your chances of having a SQL injection problem, and then learn to spot code and stored procedures which can have the problem and work to fix them. I don't recommend using ADO.NET (SqlClient, SqlCommand etc...) directly unless you have to, not because it's somehow not safe to use it with parameters but because it's that much easier to get lazy and just start writing a SQL query using strings and just ignoring the parameters. ORMS do a great job of forcing you to use parameters because it's just what they do.

Next Visit the OWASP site on SQL injection https://www.owasp.org/index.php/SQL_Injection and use the SQL injection cheat sheet to make sure you can spot and take out any issues that will arise in your code. https://www.owasp.org/index.php/SQL_Injection_Prevention_Cheat_Sheet finally I would say put in place a good code review between you and other developers at your company where you can review each others code for things like SQL injection and XSS. A lot of times programmers miss this stuff because they're trying to rush out some feature and don't spend too much time on reviewing their code.

Following the suggestion by JiminP....

I made a jsFiddle that will "smoothly" transition between two spans in case anyone is interested in seeing this in action. You have two main options:

1. one span fades out at the same time as the other span is fading in
2. one span fades out followed by the other span fading in.

The first time you click the button, number 1 above will occur. The second time you click the button, number 2 will occur. (I did this so you can visually compare the two effects.)

Try it Out: http://jsfiddle.net/jWcLz/594/

Details:

Number 1 above (the more difficult effect) is accomplished by positioning the spans directly on top of each other via CSS with absolute positioning. Also, the jQuery animates are not chained together, so that they can execute at the same time.

HTML

<div class="onTopOfEachOther">
    <span id='a'>Hello</span>
    <span id='b' style="display: none;">Goodbye</span>
</div>

<br />
<br />

<input type="button" id="btnTest" value="Run Test" />

CSS

.onTopOfEachOther {
    position: relative;
}
.onTopOfEachOther span {
    position: absolute;
    top: 0px;
    left: 0px;
}

JavaScript

$('#btnTest').click(function() {        
    fadeSwitchElements('a', 'b');    
}); 

function fadeSwitchElements(id1, id2)
{
    var element1 = $('#' + id1);
    var element2 = $('#' + id2);

    if(element1.is(':visible'))
    {
        element1.fadeToggle(500);
        element2.fadeToggle(500);
    }
    else
    {
         element2.fadeToggle(500, function() {
            element1.fadeToggle(500);
        });   
    }    
}

I'm pretty sure you can't simply add on delete cascade to an existing foreign key constraint. You have to drop the constraint first, then add the correct version. In standard SQL, I believe the easiest way to do this is to

• start a transaction,
• drop the foreign key,
• add a foreign key with on delete cascade, and finally
• commit the transaction

Repeat for each foreign key you want to change.

But PostgreSQL has a non-standard extension that lets you use multiple constraint clauses in a single SQL statement. For example

alter table public.scores
drop constraint scores_gid_fkey,
add constraint scores_gid_fkey
   foreign key (gid)
   references games(gid)
   on delete cascade;

If you don't know the name of the foreign key constraint you want to drop, you can either look it up in pgAdminIII (just click the table name and look at the DDL, or expand the hierarchy until you see "Constraints"), or you can query the information schema.

select *
from information_schema.key_column_usage
where position_in_unique_constraint is not null

If this is in SQL Server, your syntax is correct; however, you need to reference the COUNT(*) as the Total Count from your nested query. This should give you what you need:

SELECT CASE WHEN TotalCount >0 THEN 'TRUE' ELSE 'FALSE' END FROM
(
  SELECT [Some Column], COUNT(*) TotalCount
  FROM INCIDENTS
  WHERE [Some Column] = 'Target Data'
  GROUP BY [Some Column]
) DerivedTable

Using this, you could assign TotalCount to a variable and then use an IF ELSE statement to execute your INSERT statements:

DECLARE @TotalCount int
SELECT @TotalCount = TotalCount FROM
(
  SELECT [Some Column], COUNT(*) TotalCount
  FROM INCIDENTS
  WHERE [Some Column] = 'Target Data'
  GROUP BY [Some Column]
) DerivedTable
IF @TotalCount > 0
    -- INSERT STATEMENT 1 GOES HERE
ELSE
    -- INSERT STATEMENT 2 GOES HERE

ubound(arr, 1) 

and

ubound(arr, 2) 

Most of the times there has been a problem with building the cache of the IDE, or something related.

Most probably, File -> Invalidate Caches / Restart, will resolve this problem, just let the IDE finalize it's caching.

A simple solution:

import multiprocessing

output=[]
data = range(0,10)

def f(x):
    return x**2

def handler():
    p = multiprocessing.Pool(64)
    r=p.map(f, data)
    return r

if __name__ == '__main__':
    output.append(handler())

print(output[0])

Output:

[0, 1, 4, 9, 16, 25, 36, 49, 64, 81]

Try figsize param in df.plot(figsize=(width,height)):

df = pd.DataFrame({"a":[1,2],"b":[1,2]})
df.plot(figsize=(3,3));

df = pd.DataFrame({"a":[1,2],"b":[1,2]})
df.plot(figsize=(5,3));

The size in figsize=(5,3) is given in inches per (width, height)

https://pandas.pydata.org/pandas-docs/stable/reference/api/pandas.DataFrame.plot.html

The answer is: you can't only through sms, i have tried that approach before.

You could fetch the base station IDs, but this won't help you a lot without the location of the base station itself and this informations are really hard to retrieve from the providers.

I have looked through the 3 apps you have listed in your question:

1. The App uses WiFi and GPRS location service, quite the same approach as Google uses on the phone. phonesavvy maybe has a base station location database or uses a database retrieved e.g. from OpenStreetMap or some similar crowd-based project.
2. The app analyzes just the number for country code and city code. No location there.
3. Dito.

1. Wrap the element inside a div container as a row like your form here or something like that.
2. Set css attribute:
   • width: 30%; (or anything you want)
   • margin: auto; Please take a look on following picture for more detail.

The filter function wasn't working for me at all; maybe the more recent version of jquery doesn't perform as the version used in above code. Regardless; I used:

    var black = $('.black');
    var white = $('.white');

The selector will find every element classed under black or white. Button functions stay as stated above:

    $('#showBlackButton').click(function() {
           black.show();
           white.hide();
    });

    $('#showWhiteButton').click(function() {
           white.show();
           black.hide();
    });

You can make a generator that returns everything that isn't removed:

def newlist(somelist):
    for element in somelist:
        do_action(element)
        if not check(element):
            yield element

There's no need for hacks or overflow. There's a pseudo-element for the dropdown arrow on IE:

select::-ms-expand {
    display: none;
}

I hope this will help somebody, I solved the problem like this

There was a problem because the database was not open. Command startup opens the database.

This you can solve with command alter database open in some case with alter database open resetlogs

$ sqlplus / sysdba

SQL> startup
ORACLE instance started.

Total System Global Area 1073741824 bytes
Fixed Size          8628936 bytes
Variable Size         624952632 bytes
Database Buffers      436207616 bytes
Redo Buffers            3952640 bytes
Database mounted.
Database opened.

SQL> conn user/pass123
Connected.

Most solutions for getting the IP address via t-sql fall into these two camps:

1. Run ipconfig.exe via xp_cmdshell and parse the output

2. Query DMV sys.dm_exec_connections

I'm not a fan of option #1. Enabling xp_cmdshell has security drawbacks, and there's lots of parsing involved anyway. That's cumbersome. Option #2 is elegant. And it's a pure t-sql solution, which I almost always prefer. Here are two sample queries for option #2:

SELECT c.local_net_address
FROM sys.dm_exec_connections AS c
WHERE c.session_id = @@SPID;

SELECT TOP(1) c.local_net_address
FROM sys.dm_exec_connections AS c
WHERE c.local_net_address IS NOT NULL;

Sometimes, neither of the above queries works, though. Query #1 returns NULL if you're connected over Shared Memory (logged in and running SSMS on the SQL host). Query #2 may return nothing if there are no connections using a non-Shared Memory protocol. This scenario is likely when connected to a newly installed SQL instance. The solution? Force a connection over TCP/IP. To do this, create a new connection in SSMS and use the "tcp:" prefix with the server name. Then re-run either query and you'll get the IP address.

The solution of Rob Stevenson-Legget is slow because he doesn't bind his values but he uses string.Format( ).

When you ask Oracle to execute a sql statement it starts with calculating the has value of this statement. After that it looks in a hash table whether it already knows this statement. If it already knows it statement it can retrieve its execution path from this hash table and execute this statement really fast because Oracle has executed this statement before. This is called the library cache and it doesn't work properly if you don't bind your sql statements.

For example don't do:

int n;

    for (n = 0; n < 100000; n ++)
    {
      mycommand.CommandText = String.Format("INSERT INTO [MyTable] ([MyId]) VALUES({0})", n + 1);
      mycommand.ExecuteNonQuery();
    }

but do:

      OracleParameter myparam = new OracleParameter();
      int n;

      mycommand.CommandText = "INSERT INTO [MyTable] ([MyId]) VALUES(?)";
      mycommand.Parameters.Add(myparam);

      for (n = 0; n < 100000; n ++)
      {
        myparam.Value = n + 1;
        mycommand.ExecuteNonQuery();
      }

Not using parameters can also cause sql injection.

I came up with another solution, which I don't love but gets the job done.

Basically duplicate the child elements in such a way that the duplicates are not visible.

<div id="parent">
    <div class="width-calc">
        <div class="child1"></div>
        <div class="child2"></div>
    </div>

    <div class="child1"></div>
    <div class="child2"></div>
</div>

CSS:

.width-calc {
    height: 0;
    overflow: hidden;
}

If those child elements contain little markup, then the impact will be small.

As @stevebot said, do this:

https://<bucket-name>.s3.amazonaws.com/<key>

The one important thing I would like to add is that you either have to make your bucket objects all publicly accessible OR you can add a custom policy to your bucket policy. That custom policy could allow traffic from your network IP range or a different credential.

When calling the callback function, we could use it like below:

consumingFunction(callbackFunctionName)

Example:

// Callback function only know the action,
// but don't know what's the data.
function callbackFunction(unknown) {
  console.log(unknown);
}

// This is a consuming function.
function getInfo(thenCallback) {
  // When we define the function we only know the data but not
  // the action. The action will be deferred until excecuting.
  var info = 'I know now';
  if (typeof thenCallback === 'function') {
    thenCallback(info);    
  }
}

// Start.
getInfo(callbackFunction); // I know now

This is the Codepend with full example.

If you are using Java 6 or higher you can use wildcards of this form:

java -classpath ".;c:\mylibs\*;c:\extlibs\*" MyApp

If you would like to add all subdirectories: lib\a\, lib\b\, lib\c\, there is no mechanism for this in except:

java -classpath ".;c:\lib\a\*;c:\lib\b\*;c:\lib\c\*" MyApp

There is nothing like lib\*\* or lib\** wildcard for the kind of job you want to be done.

Just in case I trip over this error in 2 weeks again... My case: Checkout an existing project via git and pull in all dependencies via composer. Came down to the same error listed within the title of this post.

Solution:

composer dump-autoload
composer install --no-scripts

make sure everything works now as expected (no errors!)

composer update

Try str.replace():

string = "it is icy"
print string.replace("i", "")

We can also do the same using java 8.

public static<T> List<T> reverseList(List<T> list) {
        List<T> reverse = new ArrayList<>(list.size());

        list.stream()
                .collect(Collectors.toCollection(LinkedList::new))
                .descendingIterator()
                .forEachRemaining(reverse::add);

        return reverse;
    }

@Cris sorry .This is quote MSDN Microsoft

Methodology

In this experiment, two classes will be compared. The StreamReader and the FileStream class will be directed to read two files of 10K and 200K in their entirety from the application directory.

StreamReader (VB.NET)

sr = New StreamReader(strFileName)
Do
  line = sr.ReadLine()
Loop Until line Is Nothing
sr.Close()

FileStream (VB.NET)

Dim fs As FileStream
Dim temp As UTF8Encoding = New UTF8Encoding(True)
Dim b(1024) As Byte
fs = File.OpenRead(strFileName)
Do While fs.Read(b, 0, b.Length) > 0
    temp.GetString(b, 0, b.Length)
Loop
fs.Close()

Result

FileStream is obviously faster in this test. It takes an additional 50% more time for StreamReader to read the small file. For the large file, it took an additional 27% of the time.

StreamReader is specifically looking for line breaks while FileStream does not. This will account for some of the extra time.

Recommendations

Depending on what the application needs to do with a section of data, there may be additional parsing that will require additional processing time. Consider a scenario where a file has columns of data and the rows are CR/LF delimited. The StreamReader would work down the line of text looking for the CR/LF, and then the application would do additional parsing looking for a specific location of data. (Did you think String. SubString comes without a price?)

On the other hand, the FileStream reads the data in chunks and a proactive developer could write a little more logic to use the stream to his benefit. If the needed data is in specific positions in the file, this is certainly the way to go as it keeps the memory usage down.

FileStream is the better mechanism for speed but will take more logic.

Try + (instancetype)appearance of UITableView:

Objective-C:

[[UITableView appearance] setSeparatorColor:[UIColor blackColor]]; // set your desired colour in place of "[UIColor blackColor]"

Swift 3.0:

UITableView.appearance().separatorColor = UIColor.black // set your desired colour in place of "UIColor.black"

Note: Change will reflect to all tables used in application.

As the data you show are factors, it complicates things a little bit. @diliop's Answer approaches the problem by converting to nm to a character variable. To get back to the original factors a further step is required.

An alternative is to manipulate the levels of the factor in place.

> lev <- with(junk, levels(nm))
> lev[lev == "B"] <- "b"
> junk2 <- within(junk, levels(nm) <- lev)
> junk2
   nm val
1   A   a
2   b   b
3   C   c
4   D   d
5   A   e
6   b   f
7   C   g
8   D   h
9   A   i
10  b   j
11  C   k
12  D   l

That is quite simple and I often forget that there is a replacement function for levels().

Edit: As noted by @Seth in the comments, this can be done in a one-liner, without loss of clarity:

within(junk, levels(nm)[levels(nm) == "B"] <- "b")

Show More, Show Less (Only when needed) No JQuery

I needed this functionality for an RSS feed on our company's website. This is what I came up with:

// Create Variables_x000D_
var allOSB = [];_x000D_
var mxh = '';_x000D_
_x000D_
window.onload = function() {_x000D_
  // Set Variables_x000D_
  allOSB = document.getElementsByClassName("only-so-big");_x000D_
  _x000D_
  if (allOSB.length > 0) {_x000D_
    mxh = window.getComputedStyle(allOSB[0]).getPropertyValue('max-height');_x000D_
    mxh = parseInt(mxh.replace('px', ''));_x000D_
    _x000D_
    // Add read-more button to each OSB section_x000D_
    for (var i = 0; i < allOSB.length; i++) {_x000D_
      var el = document.createElement("button");_x000D_
      el.innerHTML = "Read More";_x000D_
      el.setAttribute("type", "button");_x000D_
      el.setAttribute("class", "read-more hid");_x000D_
      _x000D_
      insertAfter(allOSB[i], el);_x000D_
    }_x000D_
  }_x000D_
_x000D_
  // Add click function to buttons_x000D_
  var readMoreButtons = document.getElementsByClassName("read-more");_x000D_
  for (var i = 0; i < readMoreButtons.length; i++) {_x000D_
    readMoreButtons[i].addEventListener("click", function() { _x000D_
      revealThis(this);_x000D_
    }, false);_x000D_
  }_x000D_
  _x000D_
  // Update buttons so only the needed ones show_x000D_
  updateReadMore();_x000D_
}_x000D_
// Update on resize_x000D_
window.onresize = function() {_x000D_
  updateReadMore();_x000D_
}_x000D_
_x000D_
// show only the necessary read-more buttons_x000D_
function updateReadMore() {_x000D_
  if (allOSB.length > 0) {_x000D_
    for (var i = 0; i < allOSB.length; i++) {_x000D_
      if (allOSB[i].scrollHeight > mxh) {_x000D_
        if (allOSB[i].hasAttribute("style")) {_x000D_
          updateHeight(allOSB[i]);_x000D_
        }_x000D_
        allOSB[i].nextElementSibling.className = "read-more";_x000D_
      } else {_x000D_
        allOSB[i].nextElementSibling.className = "read-more hid";_x000D_
      }_x000D_
    }_x000D_
  }_x000D_
}_x000D_
_x000D_
function revealThis(current) {_x000D_
  var el = current.previousElementSibling;_x000D_
  if (el.hasAttribute("style")) {_x000D_
    current.innerHTML = "Read More";_x000D_
    el.removeAttribute("style");_x000D_
  } else {_x000D_
    updateHeight(el);_x000D_
    current.innerHTML = "Show Less";_x000D_
  }_x000D_
}_x000D_
_x000D_
function updateHeight(el) {_x000D_
  el.style.maxHeight = el.scrollHeight + "px";_x000D_
}_x000D_
_x000D_
// thanks to karim79 for this function_x000D_
// http://stackoverflow.com/a/4793630/5667951_x000D_
function insertAfter(referenceNode, newNode) {_x000D_
    referenceNode.parentNode.insertBefore(newNode, referenceNode.nextSibling);_x000D_
}

@import url('https://fonts.googleapis.com/css?family=Open+Sans:600');_x000D_
_x000D_
*,_x000D_
*:before,_x000D_
*:after {_x000D_
  box-sizing: border-box;_x000D_
}_x000D_
html,_x000D_
body {_x000D_
  height: 100%;_x000D_
  margin: 0;_x000D_
  padding: 0;_x000D_
  width: 100%;_x000D_
}_x000D_
body {_x000D_
  font-family: 'Open Sans', sans-serif;_x000D_
}_x000D_
h1 {_x000D_
  text-align: center;_x000D_
}_x000D_
.main-container {_x000D_
  margin: 30px auto;_x000D_
  max-width: 1000px;_x000D_
  padding: 20px;_x000D_
}_x000D_
.only-so-big p {_x000D_
  padding: 0;_x000D_
  margin: 0;_x000D_
}_x000D_
p {_x000D_
  font-size: 15px;_x000D_
  line-height: 20px;_x000D_
}_x000D_
hr {_x000D_
  background: #ccc;_x000D_
  display: block;_x000D_
  height: 1px;_x000D_
  width: 100%;_x000D_
}_x000D_
_x000D_
_x000D_
/*_x000D_
  NECESSARY SECTION_x000D_
*/_x000D_
.only-so-big {_x000D_
  background: rgba(178, 252, 255, .3);_x000D_
  height: 100%;_x000D_
  max-height: 100px;_x000D_
  overflow: hidden;_x000D_
  -webkit-transition: max-height .75s;_x000D_
  transition: max-height .75s;_x000D_
}_x000D_
_x000D_
.read-more {_x000D_
  background: none;_x000D_
  border: none;_x000D_
  color: #1199f9;_x000D_
  cursor: pointer;_x000D_
  font-size: 1em;_x000D_
  outline: none; _x000D_
}_x000D_
.read-more:hover {_x000D_
  text-decoration: underline;_x000D_
}_x000D_
.read-more:focus {_x000D_
  outline: none;_x000D_
}_x000D_
.read-more::-moz-focus-inner {_x000D_
  border: 0;_x000D_
}_x000D_
.hid {_x000D_
  display: none;_x000D_
}

<div class="main-container">_x000D_
      <h1>Controlling Different Content Size</h1>_x000D_
      <p>We're working with an RSS feed and have had issues with some being much larger than others (content wise). I only want to show the "Read More" button if it's needed.</p>_x000D_
      <div class="only-so-big">_x000D_
        <p>This is just a short guy. No need for the read more button.</p>_x000D_
      </div>_x000D_
      <hr>_x000D_
      <div class="only-so-big">_x000D_
        <p>This one has way too much content to show. Best be saving it for those who want to read everything in here.</p>_x000D_
        <p>Sed ut perspiciatis unde omnis iste natus error sit voluptatem accusantium doloremque laudantium, totam rem aperiam, eaque ipsa quae ab illo inventore veritatis et quasi architecto beatae vitae dicta sunt explicabo. Nemo enim ipsam voluptatem quia_x000D_
          voluptas sit aspernatur aut odit aut fugit, sed quia consequuntur magni dolores eos qui ratione voluptatem sequi nesciunt. Neque porro quisquam est, qui dolorem ipsum quia dolor sit amet, consectetur, adipisci velit, sed quia non numquam eius modi THE END!</p>_x000D_
      </div>_x000D_
      <hr>_x000D_
      <div class="only-so-big">_x000D_
        <p>Another small section with not a lot of content</p>_x000D_
      </div>_x000D_
      <hr>_x000D_
      <div class="only-so-big">_x000D_
        <p>Make Window smaller to show "Read More" button.<br> totam rem aperiam, eaque ipsa quae ab illo inventore veritatis et quasi architecto beatae vitae dicta sunt explicabo. Nemo enim ipsam voluptatem quia voluptas sit aspernatur aut odit aut fugit, sed?</p>_x000D_
      </div>_x000D_
    </div>

You can refer the below example to understand the working of re.match and re.search

a = "123abc"
t = re.match("[a-z]+",a)
t = re.search("[a-z]+",a)

re.match will return none, but re.search will return abc.

As an alternative to MailDefinition, have a look at RazorEngine https://github.com/Antaris/RazorEngine.

This looks like a better solution.

Attributted to...

how to send email wth email template c#

E.g

using RazorEngine;
using RazorEngine.Templating;
using System;

namespace RazorEngineTest
{
    class Program
    {
        static void Main(string[] args)
        {
    string template =
    @"<h1>Heading Here</h1>
Dear @Model.UserName,
<br />
<p>First part of the email body goes here</p>";

    const string templateKey = "tpl";

    // Better to compile once
    Engine.Razor.AddTemplate(templateKey, template);
    Engine.Razor.Compile(templateKey);

    // Run is quicker than compile and run
    string output = Engine.Razor.Run(
        templateKey, 
        model: new
        {
            UserName = "Fred"
        });

    Console.WriteLine(output);
        }
    }
}

Which outputs...

<h1>Heading Here</h1>
Dear Fred,
<br />
<p>First part of the email body goes here</p>

Heading Here

Dear Fred,

First part of the email body goes here

So basically you can do this:

fs.readFile(path.resolve(__dirname, 'settings.json'), 'UTF-8', callback);

Use resolve() instead of concatenating with '/' or '\' else you will run into cross-platform issues.

Note: __dirname is the local path of the module or included script. If you are writing a plugin which needs to know the path of the main script it is:

require.main.filename

or, to just get the folder name:

require('path').dirname(require.main.filename)

Combined pwd and getpass approach, based on other answers:

try:
  import pwd
except ImportError:
  import getpass
  pwd = None

def current_user():
  if pwd:
    return pwd.getpwuid(os.geteuid()).pw_name
  else:
    return getpass.getuser()

<input class="form-control search-query input_style" placeholder="Search…"  name="" title="Search for:" type="text">


.input_style
{
    padding-left:20px;
}

Installing postgres using apt-get does not create a user role or a database.

To create a superuser role and a database for your personal user account:

sudo -u postgres createuser -s $(whoami); createdb $(whoami)

You have to be very careful with the ThreadLocal pattern. There are some major down sides like Phil mentioned, but one that wasn't mentioned is to make sure that the code that sets up the ThreadLocal context isn't "re-entrant."

Bad things can happen when the code that sets the information gets run a second or third time because information on your thread can start to mutate when you didn't expect it. So take care to make sure the ThreadLocal information hasn't been set before you set it again.

In C++17, new functions std::to_chars and std::from_chars are introduced in header charconv.

std::to_chars is locale-independent, non-allocating, and non-throwing.

Only a small subset of formatting policies used by other libraries (such as std::sprintf) is provided.

From std::to_chars, same for std::from_chars.

The guarantee that std::from_chars can recover every floating-point value formatted by to_chars exactly is only provided if both functions are from the same implementation

 // See en.cppreference.com for more information, including format control.
#include <cstdio>
#include <cstddef>
#include <cstdlib>
#include <cassert>
#include <charconv>

using Type =  /* Any fundamental type */ ;
std::size_t buffer_size = /* ... */ ;

[[noreturn]] void report_and_exit(int ret, const char *output) noexcept 
{
    std::printf("%s\n", output);
    std::exit(ret);
}
void check(const std::errc &ec) noexcept
{
    if (ec ==  std::errc::value_too_large)
        report_and_exit(1, "Failed");
}
int main() {
    char buffer[buffer_size];        
    Type val_to_be_converted, result_of_converted_back;

    auto result1 = std::to_chars(buffer, buffer + buffer_size,  val_to_be_converted);
    check(result1.ec);
    *result1.ptr = '\0';

    auto result2 = std::from_chars(buffer, result1.ptr, result_of_converted_back);
    check(result2.ec);

    assert(val_to_be_converted == result_of_converted_back);
    report_and_exit(0, buffer);
}

Although it's not fully implemented by compilers, it definitely will be implemented.

I had the same problem. I tried installing Visual Studio 2010 SP1 but it didn't worked.

Finally I get Microsoft.Web.Infrastructure.dll from the colleague. You can find the dll into your friends PC where the project is perfectly working. Try to search dll into Temp/Temporary ASP.NET Files. Go to Temp using %temp% into run window.

After getting dll into your pc, just add reference to your project and it will work.

We have found Jsmooth to be well-working and easily scriptable with ant under Linux. You may want to use one-jar (also easily scriptable with ant under Linux) to collect a multifile application in a single jar first.

We primarily needed the easy deployment of the EXE combined with the "hey, you need Java version X, go here to download" facilities.

(but what you most likely need is the "Runnable jar" / "Executable jar" facility in standard Java).

As Tyler points out, there's no way to do what you require "directly and reliably", since a given FD may correspond to 0 filenames (in various cases) or > 1 (multiple "hard links" is how the latter situation is generally described). If you do still need the functionality with all the limitations (on speed AND on the possibility of getting 0, 2, ... results rather than 1), here's how you can do it: first, fstat the FD -- this tells you, in the resulting struct stat, what device the file lives on, how many hard links it has, whether it's a special file, etc. This may already answer your question -- e.g. if 0 hard links you will KNOW there is in fact no corresponding filename on disk.

If the stats give you hope, then you have to "walk the tree" of directories on the relevant device until you find all the hard links (or just the first one, if you don't need more than one and any one will do). For that purpose, you use readdir (and opendir &c of course) recursively opening subdirectories until you find in a struct dirent thus received the same inode number you had in the original struct stat (at which time if you want the whole path, rather than just the name, you'll need to walk the chain of directories backwards to reconstruct it).

If this general approach is acceptable, but you need more detailed C code, let us know, it won't be hard to write (though I'd rather not write it if it's useless, i.e. you cannot withstand the inevitably slow performance or the possibility of getting != 1 result for the purposes of your application;-).

If "logout from all devices" option is acceptable (in most cases it is):

• Add the token version field to the user record.
• Add the value in this field to the claims stored in the JWT.
• Increment the version every time the user logs out.
• When validating the token compare its version claim to the version stored in the user record and reject if it is not the same.

A db trip to get the user record in most cases is required anyway so this does not add much overhead to the validation process. Unlike maintaining a blacklist, where DB load is significant due to the necessity to use a join or a separate call, clean old records and so on.

app-routing.module.ts

const routes: Routes = [
  { path: 'products', component: ProductsComponent },
  { path: 'product/:id', component: ProductDetailsComponent },
  { path: '', redirectTo: '/products', pathMatch: 'full' },
];

In controller you can navigate like this,

this.router.navigate(['/products', productId]);

It will land you to path like this: http://localhost:4200/products/product-id

Ref

this should work

$.validator.addMethod("endDate", function(value, element) {_x000D_
            var startDate = $('#date_open').val();_x000D_
            return Date.parse(startDate) <= Date.parse(value) || value == "";_x000D_
        }, "* End date must be after start date");

Use the pdfpages package.

\usepackage{pdfpages}

To include all the pages in the PDF file:

\includepdf[pages=-]{myfile.pdf}

To include just the first page of a PDF:

\includepdf[pages={1}]{myfile.pdf}

Run texdoc pdfpages in a shell to see the complete manual for pdfpages.

If the table is already populated it is not possible to change a column to IDENTITY column or convert it to non IDENTITY column. You would need to export all the data out then you can change column type to IDENTITY or vice versa and then import data back. I know it is painful process but I believe there is no alternative except for using sequence as mentioned in this post.

use screensplitr on jailbrocken iphone/ipod touch it works

I created a container and set it the desired height of the view port (depending on the number of charts or chart specific sizes):

.graph-container {
width: 100%;
height: 30vh;
}

To be dynamic to screen sizes I set the container as follows:

*Small media devices specific styles*/
@media screen and (max-width: 800px) {
.graph-container {
        display: block;
        float: none;
        width: 100%;
        margin-top: 0px;
        margin-right:0px;
        margin-left:0px;
        height: auto;
    }
}

Of course very important (as have been referred to numerous times) set the following option properties of your chart:

options:{
    maintainAspectRatio: false,
    responsive: true,
}

Login to both your SQL Box and your client and type:

ipconfig /flushdns
nbtstat -R

If that doesn't work, renew your DHCP on your client machine... This work for 2 PCs in our office.

For future reference you can work out computed styles via an inspector

Version A (efficient push):

• push:
  • enqueue in queue1
• pop:
  • while size of queue1 is bigger than 1, pipe dequeued items from queue1 into queue2
  • dequeue and return the last item of queue1, then switch the names of queue1 and queue2

Version B (efficient pop):

• push:
  • enqueue in queue2
  • enqueue all items of queue1 in queue2, then switch the names of queue1 and queue2
• pop:
  • deqeue from queue1

For those using newer versions Chart.js, you can set a label by setting the callback for tooltips.callbacks.label in options.

Example of this would be:

var chartOptions = {
    tooltips: {
        callbacks: {
            label: function (tooltipItem, data) {
                return 'label';
            }
        }
    }
}

For static declaration I think you could use:

T myarray[100] = {0};

For dynamic declaration I suggest the same way: memset

I believe this would work. It takes const char*'s as a parameter.

//params find and replace cannot be NULL
void FindAndReplace( std::string& source, const char* find, const char* replace )
{
   //ASSERT(find != NULL);
   //ASSERT(replace != NULL);
   size_t findLen = strlen(find);
   size_t replaceLen = strlen(replace);
   size_t pos = 0;

   //search for the next occurrence of find within source
   while ((pos = source.find(find, pos)) != std::string::npos)
   {
      //replace the found string with the replacement
      source.replace( pos, findLen, replace );

      //the next line keeps you from searching your replace string, 
      //so your could replace "hello" with "hello world" 
      //and not have it blow chunks.
      pos += replaceLen; 
   }
}

If you are using JAX-WS on JDK6, use the following properties:

com.sun.xml.internal.ws.connect.timeout  
com.sun.xml.internal.ws.request.timeout

To replace a character at a specified position :

public static String replaceCharAt(String s, int pos, char c) {
   return s.substring(0,pos) + c + s.substring(pos+1);
}

TL;DR: Use StandardError instead for general exception catching. When the original exception is re-raised (e.g. when rescuing to log the exception only), rescuing Exception is probably okay.

Exception is the root of Ruby's exception hierarchy, so when you rescue Exception you rescue from everything, including subclasses such as SyntaxError, LoadError, and Interrupt.

Rescuing Interrupt prevents the user from using CTRLC to exit the program.

Rescuing SignalException prevents the program from responding correctly to signals. It will be unkillable except by kill -9.

Rescuing SyntaxError means that evals that fail will do so silently.

All of these can be shown by running this program, and trying to CTRLC or kill it:

loop do
  begin
    sleep 1
    eval "djsakru3924r9eiuorwju3498 += 5u84fior8u8t4ruyf8ihiure"
  rescue Exception
    puts "I refuse to fail or be stopped!"
  end
end

Rescuing from Exception isn't even the default. Doing

begin
  # iceberg!
rescue
  # lifeboats
end

does not rescue from Exception, it rescues from StandardError. You should generally specify something more specific than the default StandardError, but rescuing from Exception broadens the scope rather than narrowing it, and can have catastrophic results and make bug-hunting extremely difficult.

If you have a situation where you do want to rescue from StandardError and you need a variable with the exception, you can use this form:

begin
  # iceberg!
rescue => e
  # lifeboats
end

which is equivalent to:

begin
  # iceberg!
rescue StandardError => e
  # lifeboats
end

One of the few common cases where it’s sane to rescue from Exception is for logging/reporting purposes, in which case you should immediately re-raise the exception:

begin
  # iceberg?
rescue Exception => e
  # do some logging
  raise # not enough lifeboats ;)
end

An issue I was having (may help someone) was simply that I was using a partial to load the Modal.

<li data-toggle="modal" data-target="#priceInfoModal">
<label>Listing Price</label>
<i class="fa fa-money"></i>
@Html.Partial("EditPartials/PriceInfo_Edit")
</li>

I had placed the partial call inside the same list item So data-target="#priceInfoModal" and div id="priceInfoModal" were in the same container causing me to not be able to close my modal

Also, if all you are trying to do is break up the main.go file into multiple files, then just name the other files "package main" as long as you only define the main function in one of those files, you are good to go.

Per Spring Data REST docs, if using application.properties, use this property to set your base path:

spring.data.rest.basePath=/api

But note that Spring uses relaxed binding, so this variation can be used:

spring.data.rest.base-path=/api

... or this one if you prefer:

spring.data.rest.base_path=/api

If using application.yml, you would use colons for key separators:

spring:
  data:
    rest:
      basePath: /api

(For reference, a related ticket was created in March 2018 to clarify the docs.)

You may try to inherit property from the base class:

var width = 2;_x000D_
var interval = setInterval(function () {_x000D_
    var element = document.getElementById('box');_x000D_
    width += 0.0625;_x000D_
    element.style.width = width + 'em';_x000D_
    if (width >= 7) clearInterval(interval);_x000D_
}, 50);

.box {_x000D_
    /* Set property */_x000D_
    width:4em;_x000D_
    height:2em;_x000D_
    background-color:#d42;_x000D_
    position:relative;_x000D_
}_x000D_
.box:after {_x000D_
    /* Inherit property */_x000D_
    width:inherit;_x000D_
    content:"";_x000D_
    height:1em;_x000D_
    background-color:#2b4;_x000D_
    position:absolute;_x000D_
    top:100%;_x000D_
}

<div id="box" class="box"></div>

[cell setSelectionStyle:UITableViewCellSelectionStyleGray];

Make sure you have used the above line to use the selection effect

In VS2008, the doc entry that seems the most useful is:

Windows Presentation Foundation Building a WPF Application (WPF)

ms-help://MS.VSCC.v90/MS.MSDNQTR.v90.en/wpf_conceptual/html/a58696fd-bdad-4b55-9759-136dfdf8b91c.htm

ApplicationDefinition Identifies the XAML markup file that contains the application definition (a XAML markup file whose root element is Application). ApplicationDefinition is mandatory when Install is true and OutputType is winexe. A WPF application and, consequently, an MSBuild project can only have one ApplicationDefinition.

Page Identifies a XAML markup file whose content is converted to a binary format and compiled into an assembly. Page items are typically implemented in conjunction with a code-behind class.

The most common Page items are XAML files whose top-level elements are one of the following:

Window (System.Windows..::.Window).

Page (System.Windows.Controls..::.Page).

PageFunction (System.Windows.Navigation..::.PageFunction<(Of <(T>)>)).

ResourceDictionary (System.Windows..::.ResourceDictionary).

FlowDocument (System.Windows.Documents..::.FlowDocument).

UserControl (System.Windows.Controls..::.UserControl).

Resource Identifies a resource file that is compiled into an application assembly. As mentioned earlier, UICulture processes Resource items.

Content Identifies a content file that is distributed with an application. Metadata that describes the content file is compiled into the application (using AssemblyAssociatedContentFileAttribute).

This is quite a misleading status. It should be called "reading and filtering data".

This means that MySQL has some data stored on the disk (or in memory) which is yet to be read and sent over. It may be the table itself, an index, a temporary table, a sorted output etc.

If you have a 1M records table (without an index) of which you need only one record, MySQL will still output the status as "sending data" while scanning the table, despite the fact it has not sent anything yet.

Also ensure that "client tools" are selected in the install options. However if SQL Managment Studio 2008 exists then it is likely that you installed the express edition.

React Router V5

If you want the pathName as a string ('/' or 'users'), you can use the following:

  // React Hooks: React Router DOM
  let history = useHistory();
  const location = useLocation();
  const pathName = location.pathname;

One solution would be to divide your table into 20 columns of 5% width each, then use colspan on each real column to get the desired width, like this:

<html>_x000D_
<body bgcolor="#14B3D9">_x000D_
<table width="100%" border="1" bgcolor="#ffffff">_x000D_
    <colgroup>_x000D_
        <col width="5%"><col width="5%">_x000D_
        <col width="5%"><col width="5%">_x000D_
        <col width="5%"><col width="5%">_x000D_
        <col width="5%"><col width="5%">_x000D_
        <col width="5%"><col width="5%">_x000D_
        <col width="5%"><col width="5%">_x000D_
        <col width="5%"><col width="5%">_x000D_
        <col width="5%"><col width="5%">_x000D_
        <col width="5%"><col width="5%">_x000D_
        <col width="5%"><col width="5%">_x000D_
    </colgroup>_x000D_
    <tr>_x000D_
        <td colspan=5>25</td>_x000D_
        <td colspan=10>50</td>_x000D_
        <td colspan=5>25</td>_x000D_
    </tr>_x000D_
    <tr>_x000D_
        <td colspan=10>50</td>_x000D_
        <td colspan=6>30</td>_x000D_
        <td colspan=4>20</td>_x000D_
    </tr>_x000D_
</table>_x000D_
</body>_x000D_
</html>

JSFIDDLE

I had this problem because I hadn't given iTunes permissions to run on the computer. (I don't use iTunes for music, so I had foolishly just hit "decline" in annoyance whenever the EULA dialog box came up.)

Notice that "cex" does change things when the plot is made with text. For example, the plot of an agglomerative hierarchical clustering:

library(cluster)
data(votes.repub)
agn1 <- agnes(votes.repub, metric = "manhattan", stand = TRUE)
plot(agn1, which.plots=2)

will produce a plot with normal sized text:

and plot(agn1, which.plots=2, cex=0.5) will produce this one:

# file? will only return true for files
File.file?(filename)

and

# Will also return true for directories - watch out!
File.exist?(filename)

if you want to do it with pure HTML solution ,you can delete the border in the table if you want...or you can add align="center" attribute to your img tag like this:

<img align="center" width="100%" height="100%" src="http://dummyimage.com/68x68/000/fff" />

see the fiddle : http://jsfiddle.net/Lk2Rh/27/

but still it better to handling this with CSS, i suggest you that.

• I hope this help.

i created a custom dialog API. check it out here https://github.com/MarkMyWord03/CustomDialog. It supports message and confirmation box. input and option dialog just like in joptionpane will be implemented soon.

Sample Error Dialog from CUstomDialog API: CustomDialog Error Message

You need to add your source files with git add or the GUI equivalent so that Git will begin tracking them.

Use git status to see what Git thinks about the files in any given directory.

I got it working by selecting the original layout I had in the W / H selection. Storyboard is working as expected and the error is gone.

Be also sure that you are developing for iOS 8.0. Check that from the project's general settings.

This is where you should press.

I had to add the webkit prefix for safari (but flex not flexbox):

display:-webkit-flex

You should use OpenSSL over mcrypt as it's actively developed and maintained. It provides better security, maintainability and portability. Secondly it performs AES encryption/decryption much faster. It uses PKCS7 padding by default, but you can specify OPENSSL_ZERO_PADDING if you need it. To use with a 32-byte binary key, you can specify aes-256-cbc which is much obvious than MCRYPT_RIJNDAEL_128.

Here is the code example using Mcrypt:

Unauthenticated AES-256-CBC encryption library written in Mcrypt with PKCS7 padding.

/**
 * This library is unsafe because it does not MAC after encrypting
 */
class UnsafeMcryptAES
{
    const CIPHER = MCRYPT_RIJNDAEL_128;

    public static function encrypt($message, $key)
    {
        if (mb_strlen($key, '8bit') !== 32) {
            throw new Exception("Needs a 256-bit key!");
        }
        $ivsize = mcrypt_get_iv_size(self::CIPHER);
        $iv = mcrypt_create_iv($ivsize, MCRYPT_DEV_URANDOM);

        // Add PKCS7 Padding
        $block = mcrypt_get_block_size(self::CIPHER);
        $pad = $block - (mb_strlen($message, '8bit') % $block, '8bit');
        $message .= str_repeat(chr($pad), $pad);

        $ciphertext = mcrypt_encrypt(
            MCRYPT_RIJNDAEL_128,
            $key,
            $message,
            MCRYPT_MODE_CBC,
            $iv
        );

        return $iv . $ciphertext;
    }

    public static function decrypt($message, $key)
    {
        if (mb_strlen($key, '8bit') !== 32) {
            throw new Exception("Needs a 256-bit key!");
        }
        $ivsize = mcrypt_get_iv_size(self::CIPHER);
        $iv = mb_substr($message, 0, $ivsize, '8bit');
        $ciphertext = mb_substr($message, $ivsize, null, '8bit');

        $plaintext = mcrypt_decrypt(
            MCRYPT_RIJNDAEL_128,
            $key,
            $ciphertext,
            MCRYPT_MODE_CBC,
            $iv
        );

        $len = mb_strlen($plaintext, '8bit');
        $pad = ord($plaintext[$len - 1]);
        if ($pad <= 0 || $pad > $block) {
            // Padding error!
            return false;
        }
        return mb_substr($plaintext, 0, $len - $pad, '8bit');
    }
}

And here is the version written using OpenSSL:

/**
 * This library is unsafe because it does not MAC after encrypting
 */
class UnsafeOpensslAES
{
    const METHOD = 'aes-256-cbc';

    public static function encrypt($message, $key)
    {
        if (mb_strlen($key, '8bit') !== 32) {
            throw new Exception("Needs a 256-bit key!");
        }
        $ivsize = openssl_cipher_iv_length(self::METHOD);
        $iv = openssl_random_pseudo_bytes($ivsize);

        $ciphertext = openssl_encrypt(
            $message,
            self::METHOD,
            $key,
            OPENSSL_RAW_DATA,
            $iv
        );

        return $iv . $ciphertext;
    }

    public static function decrypt($message, $key)
    {
        if (mb_strlen($key, '8bit') !== 32) {
            throw new Exception("Needs a 256-bit key!");
        }
        $ivsize = openssl_cipher_iv_length(self::METHOD);
        $iv = mb_substr($message, 0, $ivsize, '8bit');
        $ciphertext = mb_substr($message, $ivsize, null, '8bit');

        return openssl_decrypt(
            $ciphertext,
            self::METHOD,
            $key,
            OPENSSL_RAW_DATA,
            $iv
        );
    }
}

Source: If You're Typing the Word MCRYPT Into Your PHP Code, You're Doing It Wrong.

<html>
<head>
<style type="text/css">
#wrapper{ width:100%; float:left; height:auto; border:1px solid #5694cf;}
</style>
</head>
<div id="wrapper">
<object data="http://partners.adobe.com/public/developer/en/acrobat/PDFOpenParameters.pdf" width="100%" height="100%">
<p>Your web browser doesn't have a PDF Plugin. Instead you can <a href="http://partners.adobe.com/public/developer/en/acrobat/PDFOpenParameters.pdf"> Click
here to download the PDF</a></p>
</object>
</div>
</html>

Get started quickly

You simply type vim into the terminal to open it and start a new file.

You can pass a filename as an option and it will open that file, e.g. vim main.c. You can open multiple files by passing multiple file arguments.

Vim has different modes, unlike most editors you have probably used. You begin in NORMAL mode, which is where you will spend most of your time once you become familiar with vim.

To return to NORMAL mode after changing to a different mode, press Esc. It's a good idea to map your Caps Lock key to Esc, as it's closer and nobody really uses the Caps Lock key.

The first mode to try is INSERT mode, which is entered with a for append after cursor, or i for insert before cursor.

To enter VISUAL mode, where you can select text, use v. There are many other variants of this mode, which you will discover as you learn more about vim.

To save your file, ensure you're in NORMAL mode and then enter the command :w. When you press :, you will see your command appear in the bottom status bar. To save and exit, use :x. To quit without saving, use :q. If you had made a change you wanted to discard, use :q!.

Configure vim to your liking

You can edit your ~/.vimrc file to configure vim to your liking. It's best to look at a few first (here's mine) and then decide which options suits your style.

This is how mine looks:

To get the file explorer on the left, use NERDTree. For the status bar, use vim-airline. Finally, the color scheme is solarized.

Further learning

You can use man vim for some help inside the terminal. Alternatively, run vimtutor which is a good hands-on starting point.

It's a good idea to print out a Vim Cheatsheet and keep it in front of you while you're learning vim.

Good luck!

Keep your private key, public key, known_hosts in same directory and try login as below:

ssh -I(small i) "hi.pem" ec2-user@ec2-**-***-**-***.us-west-2.compute.amazonaws.com

• Same directory in the sense, cd /Users/prince/Desktop. Now type ls command and you should see **.pem **.ppk known_hosts

Note: You have to try to login from the same directory or you'll get a permission denied error as it can't find the .pem file from your present directory.

If you want to be able to SSH from any directory, you can add the following to you ~/.ssh/config file...

Host your.server
HostName ec2-user@ec2-**-***-**-***.us-west-2.compute.amazonaws.com
User ec2-user
IdentityFile ~/.ec2/id_rsa-gsg-keypair
IdentitiesOnly yes

Now you can SSH to your server regardless of where the directory is by simply typing ssh your.server (or whatever name you place after "Host").

You can find the difference by converting the date in seconds and take time interval since 1970 for this and then you can find the difference between two dates.

Notification notification = new Notification.Builder(MainActivity.this)
        .setContentTitle("New Message")
        .setContentText("You've received new messages.")
        .setSmallIcon(R.drawable.ic_notify_status)
        .setChannelId(CHANNEL_ID)
        .build();  

Right code will be :

Notification.Builder notification=new Notification.Builder(this)

with dependency 26.0.1 and new updated dependencies such as 28.0.0.

Some users use this code in the form of this :

Notification notification=new NotificationCompat.Builder(this)//this is also wrong code.

So Logic is that which Method you will declare or initilize then the same methode on Right side will be use for Allocation. if in Leftside of = you will use some method then the same method will be use in right side of = for Allocation with new.

Try this code...It will sure work

We see this a lot with OAuth2 integrations. We provide API services to our Customers, and they'll naively try to put their private key into an AJAX call. This is really poor security. And well-coded API Gateways, backends for frontend, and other such proxies, do not allow this. You should get this error.

I will quote @aspillers comment and change a single word: "Access-Control-Allow-Origin is a header sent in a server response which indicates IF the client is allowed to see the contents of a result".

ISSUE: The problem is that a developer is trying to include their private key inside a client-side (browser) JavaScript request. They will get an error, and this is because they are exposing their client secret.

SOLUTION: Have the JavaScript web application talk to a backend service that holds the client secret securely. That backend service can authenticate the web app to the OAuth2 provider, and get an access token. Then the web application can make the AJAX call.

I think I have a solution to what the originator of this inquiry wanted in simple form. It works for me and actually it is the reason I came on here to begin with. I believe just using parentheses around the column like '%text%' in combination with ORs will do it.

select * from tableName
where (sameColumnName like '%findThis%' or sameColumnName like '%andThis%' or 
sameColumnName like '%thisToo%' or sameColumnName like '%andOneMore%') 

I think the easiest way is to divide two integers and increase by one :

int r = list.Count() / 10;
r += (list.Count() % 10 == 0 ? 0 : 1);

No need of libraries or functions.

edited with the right code.

_{Both the two most upvoted answers are wrong. It should have nothing to do with "store different/multiple languages". You can support Spanish characters like ñ and English, with just common varchar field and Latin1_General_CI_AS COLLATION, e.g.}

Short Version
You should use NVARCHAR/NCHAR whenever the ENCODING, which is determined by COLLATION of the field, doesn't support the characters needed.
Also, depending on the SQL Server version, you can use specific COLLATIONs, like Latin1_General_100_CI_AS_SC_UTF8 which is available since SQL Server 2019. Setting this collation on a VARCHAR field (or entire table/database), will use UTF-8 ENCODING for storing and handling the data on that field, allowing fully support UNICODE characters, and hence any languages embraced by it.

To FULLY UNDERSTAND:
_{To fully understand what I'm about to explain, it's mandatory to have the concepts of UNICODE, ENCODING and COLLATION all extremely clear in your head. If you don't, then first take a look below at my humble and simplified explanation on "What is UNICODE, ENCODING, COLLATION and UTF-8, and how they are related" section and supplied documentation links. Also, everything I say here is specific to Microsoft SQL Server, and how it stores and handles data in char/nchar and varchar/nvarchar fields.}

Let's say we wanna store a peculiar text on our MSSQL Server database. It could be an Instagram comment as "I love stackoverflow! ".
The plain English part would be perfectly supported even by ASCII, but since there are also an emoji, which is a character specified in the UNICODE standard, we need an ENCODING that supports this Unicode character.

MSSQL Server uses the COLLATION to determine what ENCODING is used on char/nchar/varchar/nvarchar fields. So, differently than a lot think, COLLATION is not only about sorting and comparing data, but also about ENCODING, and by consequence: how our data will be stored!

So, HOW WE KNOW WHAT IS THE ENCODING USED BY OUR COLLATION? With this:

SELECT COLLATIONPROPERTY( 'Latin1_General_CI_AI' , 'CodePage' ) AS [CodePage]
--returns 1252

This simple SQL returns the Windows Code Page for a COLLATION. A Windows Code Page is nothing more than another mapping to ENCODINGs. For the Latin1_General_CI_AI COLLATION it returns the Windows Code Page code 1252 , that maps to Windows-1252 ENCODING.
So, for a varchar column, with Latin1_General_CI_AI COLLATION, this field will handle its data using the Windows-1252 ENCODING, and only correctly store characters supported by this encoding.

If we check the Windows-1252 ENCODING specification Character List for Windows-1252, we will find out that this encoding won't support our emoji character. And if we still try it out:

OK, SO HOW CAN WE SOLVE THIS?? Actually, it depends, and that is GOOD!

NCHAR/NVARCHAR

Before SQL Server 2019 all we had was NCHAR and NVARCHAR fields. Some say they are UNICODE fields. THAT IS WRONG!. Again, it depends on the field's COLLATION and also SQLServer Version. Microsoft's "nchar and nvarchar (Transact-SQL)" documentation specifies perfectly:

Starting with SQL Server 2012 (11.x), when a Supplementary Character (SC) enabled collation is used, these data types store the full range of Unicode character data and use the UTF-16 character encoding. If a non-SC collation is specified, then these data types store only the subset of character data supported by the UCS-2 character encoding.

In other words, if we use SQL Server older that 2012, like SQL Server 2008 R2 for example, the ENCODING for those fields will use UCS-2 ENCODING which support a subset of UNICODE. But if we use SQL Server 2012 or newer, and define a COLLATION that has Supplementary Character enabled, than with our field will use the UTF-16 ENCODING, that fully supports UNICODE.

BUT WHAIT, THERE IS MORE! WE CAN USE UTF-8 NOW!!

CHAR/VARCHAR

Starting with SQL Server 2019, WE CAN USE CHAR/VARCHAR fields and still fully support UNICODE using UTF-8 ENCODING!!!

From Microsoft's "char and varchar (Transact-SQL)" documentation:

Starting with SQL Server 2019 (15.x), when a UTF-8 enabled collation is used, these data types store the full range of Unicode character data and use the UTF-8 character encoding. If a non-UTF-8 collation is specified, then these data types store only a subset of characters supported by the corresponding code page of that collation.

Again, in other words, if we use SQL Server older that 2019, like SQL Server 2008 R2 for example, we need to check the ENCODING using the method explained before. But if we use SQL Server 2019 or newer, and define a COLLATION like Latin1_General_100_CI_AS_SC_UTF8, then our field will use UTF-8 ENCODING which is by far the most used and efficient encoding that supports all the UNICODE characters.

Bonus Information:

Regarding the OP's observation on "I have seen that most of the European languages (German, Italian, English, ...) are fine in the same database in VARCHAR columns", I think it's nice to know why it is:

For the most common COLLATIONs, like the default ones as Latin1_General_CI_AI or SQL_Latin1_General_CP1_CI_AS the ENCODING will be Windows-1252 for varchar fields. If we take a look on it's documentation, we can see that it supports:

English, Irish, Italian, Norwegian, Portuguese, Spanish, Swedish. Plus also German, Finnish and French. And Dutch except the ? character

But as I said before, it's not about language, it's about what characters do you expect to support/store, as shown in the emoji example, or some sentence like "The electric resistance of a lithium battery is 0.5O" where we have again plain English, and a Greek letter/character "omega" (which is the symbol for resistance in ohms), which won't be correctly handled by Windows-1252 ENCODING.

Conclusion:

So, there it is! When use char/nchar and varchar/nvarchar depends on the characters that you want to support, and also the version of your SQL Server that will determines which COLLATIONs and hence the ENCODINGs you have available.

What is UNICODE, ENCODING, COLLATION and UTF-8, and how they are related
_{Note: all the explanations below are simplifications. Please, refer to the supplied documentation links to know all the details about those concepts.}

• UNICODE - Is a standard, a convention, that aims to regulate all the characters in a unified and organized table. In this table, every character has an unique number. This number is commonly called character's code point.
  UNICODE IS NOT AN ENCODING!

• ENCODING - Is a mapping between a character and a byte/bytes sequence. So a encoding is used to "transform" a character to bytes and also the other way around, from bytes to a character. Among the most popular ones are UTF-8, ISO-8859-1, Windows-1252 and ASCII. You can think of it as a "conversion table" (i really simplified here).

• COLLATION - That one is important. Even Microsoft's documentation doesn't let this clear as it should be. A Collation specifies how your data would be sorted, compared, AND STORED!. Yeah, I bet you was not expecting for that last one, right!? The collations on SQL Server determines too what would be the ENCODING used on that particular char/nchar/varchar/nvarchar field.

• ASCII ENCODING - Was one of the firsts encodings. It is both the character table (like an own tiny version of UNICODE) and its byte mappings. So it doesn't map a byte to UNICODE, but map a byte to its own character's table. Also, it always use only 7bits, and supported 128 different characters. It was enough to support all English letters upper and down cased, numbers, punctuation and some other limited number of characters. The problem with ASCII is that since it only used 7bits and almost every computer was 8bits at the time, there were another 128 possibilities of characters to be "explored", and everybody started to map this "available" bytes to its own table of characters, creating a lot of different ENCODINGs.

• UTF-8 ENCODING - This is another ENCODING, one of the most (if not the most) used ENCODING around. It uses variable byte width (one character can be from 1 to 6 bytes long, by specification) and fully supports all UNICODE characters.

• Windows-1252 ENCODING - Also one of the most used ENCODING, it's widely used on SQL Server. It's fixed-size, so every one character is always 1byte. It also supports a lot of accents, from various languages but doesn't support all existing, nor supports UNICODE. That's why your varchar field with a common collation like Latin1_General_CI_AS supports á,é,ñ characters, even that it isn't using a supportive UNICODE ENCODING.

Resources:
https://blog.greglow.com/2019/07/25/sql-think-that-varchar-characters-if-so-think-again/
https://medium.com/@apiltamang/unicode-utf-8-and-ascii-encodings-made-easy-5bfbe3a1c45a
https://www.johndcook.com/blog/2019/09/09/how-utf-8-works/
https://www.w3.org/International/questions/qa-what-is-encoding

https://en.wikipedia.org/wiki/List_of_Unicode_characters
https://www.fileformat.info/info/charset/windows-1252/list.htm

https://docs.microsoft.com/en-us/sql/t-sql/data-types/char-and-varchar-transact-sql?view=sql-server-ver15
https://docs.microsoft.com/en-us/sql/t-sql/data-types/nchar-and-nvarchar-transact-sql?view=sql-server-ver15
https://docs.microsoft.com/en-us/sql/t-sql/statements/windows-collation-name-transact-sql?view=sql-server-ver15
https://docs.microsoft.com/en-us/sql/t-sql/statements/sql-server-collation-name-transact-sql?view=sql-server-ver15
https://docs.microsoft.com/en-us/sql/relational-databases/collations/collation-and-unicode-support?view=sql-server-ver15#SQL-collations

SQL Server default character encoding
https://en.wikipedia.org/wiki/Windows_code_page

How about add this to your xaml:

<Separator/>

If you run into this problem with Visual Studio 2019 (VS2019), you can download the build tools from https://visualstudio.microsoft.com/downloads/. And, under Tools for Visual Studio 2019 and download Build Tools for Visual Studios 2019.

You can use the Background Panel class. It does the custom painting as explained above but gives you options to display the image scaled, tiled or normal size. It also explains how you can use a JLabel with an image as the content pane for the frame.

The ALL_DIRECTORIES data dictionary view will have information about all the directories that you have access to. That includes the operating system path

SELECT owner, directory_name, directory_path
  FROM all_directories

JS Code

    $("#submit").click(function() { 
    //get input field values
    var name            = $('#name').val(); 
    var email           = $('#email').val();
    var message         = $('#comment').val();
    var flag = true;
    /********validate all our form fields***********/
    /* Name field validation  */
    if(name==""){ 
        $('#name').css('border-color','red'); 
        flag = false;
    }
    /* email field validation  */
    if(email==""){ 
        $('#email').css('border-color','red'); 
        flag = false;
    } 
    /* message field validation */
    if(message=="") {  
       $('#comment').css('border-color','red'); 
        flag = false;
    }
    /********Validation end here ****/
    /* If all are ok then we send ajax request to email_send.php *******/
    if(flag) 
    {
        $.ajax({
            type: 'post',
            url: "email_send.php", 
            dataType: 'json',
            data: 'username='+name+'&useremail='+email+'&message='+message,
            beforeSend: function() {
                $('#submit').attr('disabled', true);
                $('#submit').after('<span class="wait">&nbsp;<img src="image/loading.gif" alt="" /></span>');
            },
            complete: function() {
                $('#submit').attr('disabled', false);
                $('.wait').remove();
            },  
            success: function(data)
            {
                if(data.type == 'error')
                {
                    output = '<div class="error">'+data.text+'</div>';
                }else{
                    output = '<div class="success">'+data.text+'</div>';
                    $('input[type=text]').val(''); 
                    $('#contactform textarea').val(''); 
                }

                $("#result").hide().html(output).slideDown();           
                }
        });
    }
});
//reset previously set border colors and hide all message on .keyup()
$("#contactform input, #contactform textarea").keyup(function() { 
    $("#contactform input, #contactform textarea").css('border-color',''); 
    $("#result").slideUp();
});

HTML Form

<div  class="cover">
<div id="result"></div>
<div id="contactform">
    <p class="contact"><label for="name">Name</label></p>
    <input id="name" name="name" placeholder="Yourname" type="text">

    <p class="contact"><label for="email">Email</label></p>
    <input id="email" name="email" placeholder="[email protected]" type="text">

    <p class="contact"><label for="comment">Your Message</label></p>
    <textarea name="comment" id="comment" tabindex="4"></textarea> <br>
    <input name="submit" id="submit" tabindex="5" value="Send Mail" type="submit" style="width:200px;">
</div>

PHP Code

if ($_SERVER['REQUEST_METHOD'] == 'POST') {

//check if its an ajax request, exit if not
if (!isset($_SERVER['HTTP_X_REQUESTED_WITH']) AND strtolower($_SERVER['HTTP_X_REQUESTED_WITH']) != 'xmlhttprequest') {

    //exit script outputting json data
    $output = json_encode(
            array(
                'type' => 'error',
                'text' => 'Request must come from Ajax'
    ));

    die($output);
}

//check $_POST vars are set, exit if any missing
if (!isset($_POST["username"]) || !isset($_POST["useremail"]) || !isset($_POST["message"])) {
    $output = json_encode(array('type' => 'error', 'text' => 'Input fields are empty!'));
    die($output);
}

//Sanitize input data using PHP filter_var().
$username = filter_var(trim($_POST["username"]), FILTER_SANITIZE_STRING);
$useremail = filter_var(trim($_POST["useremail"]), FILTER_SANITIZE_EMAIL);
$message = filter_var(trim($_POST["message"]), FILTER_SANITIZE_STRING);

//additional php validation
if (strlen($username) < 4) { // If length is less than 4 it will throw an HTTP error.
    $output = json_encode(array('type' => 'error', 'text' => 'Name is too short!'));
    die($output);
}
if (!filter_var($useremail, FILTER_VALIDATE_EMAIL)) { //email validation
    $output = json_encode(array('type' => 'error', 'text' => 'Please enter a valid email!'));
    die($output);
}
if (strlen($message) < 5) { //check emtpy message
    $output = json_encode(array('type' => 'error', 'text' => 'Too short message!'));
    die($output);
}

$to = "[email protected]"; //Replace with recipient email address
//proceed with PHP email.
$headers = 'From: ' . $useremail . '' . "\r\n" .
        'Reply-To: ' . $useremail . '' . "\r\n" .
        'X-Mailer: PHP/' . phpversion();

$sentMail = @mail($to, $subject, $message . '  -' . $username, $headers);
//$sentMail = true;
if (!$sentMail) {
    $output = json_encode(array('type' => 'error', 'text' => 'Could not send mail! Please contact administrator.'));
    die($output);
} else {
    $output = json_encode(array('type' => 'message', 'text' => 'Hi ' . $username . ' Thank you for your email'));
    die($output);
}

This page has a simpler example http://wearecoders.net/submit-form-without-page-refresh-with-php-and-ajax/

FileNameOnly = Dir(.SelectedItems(1))

be sure, that if the declarations for the pipe are done in one module, while you are using the pipe inside another module, you should provide correct imports/declarations at the current module under which is the class where you are using the pipe. In my case that was the reason for the pipe miss

To use IN, you must have a set, use this syntax instead:

SELECT * FROM Table1 WHERE Table1.principal NOT IN (SELECT principal FROM table2)

import os

def disk_stat(path):
    disk = os.statvfs(path)
    percent = (disk.f_blocks - disk.f_bfree) * 100 / (disk.f_blocks -disk.f_bfree + disk.f_bavail) + 1
    return percent


print disk_stat('/')
print disk_stat('/data')

As others have said, you can use the dependency:analyze goal to find which dependencies are used and declared, used and undeclared, or unused and declared. You may also find dependency:analyze-dep-mgt useful to look for mismatches in your dependencyManagement section.

You can simply remove unwanted direct dependencies from your POM, but if they are introduced by third-party jars, you can use the <exclusions> tags in a dependency to exclude the third-party jars (see the section titled Dependency Exclusions for details and some discussion). Here is an example excluding commons-logging from the Spring dependency:

<dependency>
  <groupId>org.springframework</groupId>
  <artifactId>spring</artifactId>
  <version>2.5.5</version>
  <exclusions>
    <exclusion>
      <groupId>commons-logging</groupId>
      <artifactId>commons-logging</artifactId>
    </exclusion>
  </exclusions> 
</dependency>

It some what depends on your definition of whitespace. I would generally call whitespace to be spaces, tabs, line breaks and carriage returns. If this is your definition you want to use a regex with \s to replace all whitespace charactors:

import re

def myCleaner(foo):
    print 'dirty: ', foo
    foo = re.sub(r'\s', '', foo)
    foo = foo[:-3]
    foo = foo.upper()
    print 'clean:', foo
    print

myCleaner("BS1 1AB")
myCleaner("bs11ab")
myCleaner("BS111ab")

You can call javascript functions from c# using Jering.Javascript.NodeJS, an open-source library by my organization:

string javascriptModule = @"
module.exports = (callback, x, y) => {  // Module must export a function that takes a callback as its first parameter
    var result = x + y; // Your javascript logic
    callback(null /* If an error occurred, provide an error object or message */, result); // Call the callback when you're done.
}";

// Invoke javascript
int result = await StaticNodeJSService.InvokeFromStringAsync<int>(javascriptModule, args: new object[] { 3, 5 });

// result == 8
Assert.Equal(8, result);

The library supports invoking directly from .js files as well. Say you have file C:/My/Directory/exampleModule.js containing:

module.exports = (callback, message) => callback(null, message);

You can invoke the exported function:

string result = await StaticNodeJSService.InvokeFromFileAsync<string>("C:/My/Directory/exampleModule.js", args: new[] { "test" });

// result == "test"
Assert.Equal("test", result);

I encountered this issue today. the issue has to do with the $config['base_url'] . I noticed htpp://www.domain.com and http://example.com was the issue. to fix , always set your base_url to http://www.example.com

You could ask your colleague to create a patch, which will collapse all the changes that have been made into a single file that you can apply to your own check out. This will update all of your files appropriately and then you can revert the changes on his side and check yours in.

This question is a bit tricky before Jan 2013 and matplotlib 1.3.1 (Aug 2013), which is the oldest stable version you can find on matpplotlib website. But after that it is quite trivial.

Because present version of matplotlib.pylab.scatter support assigning: array of colour name string, array of float number with colour map, array of RGB or RGBA.

this answer is dedicate to @Oxinabox's endless passion for correcting the 2013 version of myself in 2015.

you have two option of using scatter command with multiple colour in a single call.

1. as pylab.scatter command support use RGBA array to do whatever colour you want;

2. back in early 2013, there is no way to do so, since the command only support single colour for the whole scatter point collection. When I was doing my 10000-line project I figure out a general solution to bypass it. so it is very tacky, but I can do it in whatever shape, colour, size and transparent. this trick also could be apply to draw path collection, line collection....

the code is also inspired by the source code of pyplot.scatter, I just duplicated what scatter does without trigger it to draw.

the command pyplot.scatter return a PatchCollection Object, in the file "matplotlib/collections.py" a private variable _facecolors in Collection class and a method set_facecolors.

so whenever you have a scatter points to draw you can do this:

# rgbaArr is a N*4 array of float numbers you know what I mean
# X is a N*2 array of coordinates
# axx is the axes object that current draw, you get it from
# axx = fig.gca()

# also import these, to recreate the within env of scatter command 
import matplotlib.markers as mmarkers
import matplotlib.transforms as mtransforms
from matplotlib.collections import PatchCollection
import matplotlib.markers as mmarkers
import matplotlib.patches as mpatches


# define this function
# m is a string of scatter marker, it could be 'o', 's' etc..
# s is the size of the point, use 1.0
# dpi, get it from axx.figure.dpi
def addPatch_point(m, s, dpi):
    marker_obj = mmarkers.MarkerStyle(m)
    path = marker_obj.get_path()
    trans = mtransforms.Affine2D().scale(np.sqrt(s*5)*dpi/72.0)
    ptch = mpatches.PathPatch(path, fill = True, transform = trans)
    return ptch

patches = []
# markerArr is an array of maker string, ['o', 's'. 'o'...]
# sizeArr is an array of size float, [1.0, 1.0. 0.5...]

for m, s in zip(markerArr, sizeArr):
    patches.append(addPatch_point(m, s, axx.figure.dpi))

pclt = PatchCollection(
                patches,
                offsets = zip(X[:,0], X[:,1]),
                transOffset = axx.transData)

pclt.set_transform(mtransforms.IdentityTransform())
pclt.set_edgecolors('none') # it's up to you
pclt._facecolors = rgbaArr

# in the end, when you decide to draw
axx.add_collection(pclt)
# and call axx's parent to draw_idle()

You can write the where clause as:

where (case when (:stateCode = '') then (1)
            when (:stateCode != '') and (vw.state_cd in (:stateCode)) then 1
            else 0)
       end) = 1;

Alternatively, remove the case entirely:

where (:stateCode = '') or
      ((:stateCode != '') and vw.state_cd in (:stateCode));

Or, even better:

where (:stateCode = '') or vw.state_cd in (:stateCode)

If you want to apply the style even after getting struck-trough indication, you can use "!important" to enforce the style. It may not be a right solution but solve the problem.

I whould choose swing just because it's "native" for java.

Plus, have a look at http://swingx.java.net/.

Android studio offers you to analyse any apk file.

1 - From build menu choose analyse apk option and select apk file. 2 - This will result in you the classes.dex file and other files. 3 - Click on classes.dex which will give you the list of folders, packages, libraries and files. 4 - From and android studio settings install a plugin called "Dex to Jar" 5 - click on any activity file of your extracted project and choose dex to jar from the build menu.

This will result in you the actual code of your java file.

Cheers.

The correct answer is

Options -Indexes

You must have been thinking of

AllowOverride All

https://httpd.apache.org/docs/2.2/howto/htaccess.html

.htaccess files (or "distributed configuration files") provide a way to make configuration changes on a per-directory basis. A file, containing one or more configuration directives, is placed in a particular document directory, and the directives apply to that directory, and all subdirectories thereof.

If elements are always nearly sorted as in your example then builtin .sort() (timsort) should be fast:

>>> a = [1,1,2]
>>> b = [1,2,2]
>>> a.sort()
>>> b.sort()
>>> a == b
False

If you don't want to sort inplace you could use sorted().

In practice it might always be faster then collections.Counter() (despite asymptotically O(n) time being better then O(n*log(n)) for .sort()). Measure it; If it is important.

To combine both Nitzan's and Edwin's answers, I found that something like this works for me:

update = (e: React.FormEvent<EventTarget>): void => {
    let target = e.target as HTMLInputElement;
    this.props.login[target.name] = target.value;
}

Python is a dynamic, strongly typed, object oriented, multipurpose programming language, designed to be quick (to learn, to use, and to understand), and to enforce a clean and uniform syntax.

1. Python is dynamically typed: it means that you don't declare a type (e.g. 'integer') for a variable name, and then assign something of that type (and only that type). Instead, you have variable names, and you bind them to entities whose type stays with the entity itself. a = 5 makes the variable name a to refer to the integer 5. Later, a = "hello" makes the variable name a to refer to a string containing "hello". Static typed languages would have you declare int a and then a = 5, but assigning a = "hello" would have been a compile time error. On one hand, this makes everything more unpredictable (you don't know what a refers to). On the other hand, it makes very easy to achieve some results a static typed languages makes very difficult.
2. Python is strongly typed. It means that if a = "5" (the string whose value is '5') will remain a string, and never coerced to a number if the context requires so. Every type conversion in python must be done explicitly. This is different from, for example, Perl or Javascript, where you have weak typing, and can write things like "hello" + 5 to get "hello5".
3. Python is object oriented, with class-based inheritance. Everything is an object (including classes, functions, modules, etc), in the sense that they can be passed around as arguments, have methods and attributes, and so on.
4. Python is multipurpose: it is not specialised to a specific target of users (like R for statistics, or PHP for web programming). It is extended through modules and libraries, that hook very easily into the C programming language.
5. Python enforces correct indentation of the code by making the indentation part of the syntax. There are no control braces in Python. Blocks of code are identified by the level of indentation. Although a big turn off for many programmers not used to this, it is precious as it gives a very uniform style and results in code that is visually pleasant to read.
6. The code is compiled into byte code and then executed in a virtual machine. This means that precompiled code is portable between platforms.

Python can be used for any programming task, from GUI programming to web programming with everything else in between. It's quite efficient, as much of its activity is done at the C level. Python is just a layer on top of C. There are libraries for everything you can think of: game programming and openGL, GUI interfaces, web frameworks, semantic web, scientific computing...

The syntax of TINYINT data type is TINYINT(M),

where M indicates the maximum display width (used only if your MySQL client supports it).

The (m) indicates the column width in SELECT statements; however, it doesn't control the accepted range of numbers for that field.

A TINYINT is an 8-bit integer value, a BIT field can store between 1 bit, BIT(1), and 64 >bits, BIT(64). For a boolean values, BIT(1) is pretty common.

TINYINT()

To add to x4u answer, which gives you the floor of the binary log of a number, this function return the ceil of the binary log of a number :

public static int ceilbinlog(int number) // returns 0 for bits=0
{
    int log = 0;
    int bits = number;
    if ((bits & 0xffff0000) != 0) {
        bits >>>= 16;
        log = 16;
    }
    if (bits >= 256) {
        bits >>>= 8;
        log += 8;
    }
    if (bits >= 16) {
        bits >>>= 4;
        log += 4;
    }
    if (bits >= 4) {
        bits >>>= 2;
        log += 2;
    }
    if (1 << log < number)
        log++;
    return log + (bits >>> 1);
}

I have added var for all the variables in the corrosponding javascript. That solved the problem in IE.

Previous Code

billableStatus = 1 ;
var classStr = $(this).attr("id").split("_");  
date = currentWeekDates[classStr[2]]; // Required    

activityNameId = "initialRows_" + classStr[1] + "_projectActivityName";
activityId = $("#"+activityNameId).val();        

var projectNameId = "initialRows_" + classStr[1] + "_projectName" ;
projectName = $("#"+projectNameId).val();        

var timeshitEntryId = "initialRows_"+classStr[1]+"_"+classStr[2];     
timeshitEntry = $("#"+timeshitEntryId).val();   

New Code

var billableStatus = 1 ;
var classStr = $(this).attr("id").split("_");  
var date = currentWeekDates[classStr[2]]; // Required    

var activityNameId = "initialRows_" + classStr[1] + "_projectActivityName";
var activityId = $("#"+activityNameId).val();        

var projectNameId = "initialRows_" + classStr[1] + "_projectName" ;
var projectName = $("#"+projectNameId).val();        

var timeshitEntryId = "initialRows_"+classStr[1]+"_"+classStr[2];     
var timeshitEntry = $("#"+timeshitEntryId).val();   

Sessions are server-side files that contain user information, while Cookies are client-side files that contain user information. Sessions have a unique identifier that maps them to specific users. This identifier can be passed in the URL or saved into a session cookie.

Most modern sites use the second approach, saving the identifier in a Cookie instead of passing it in a URL (which poses a security risk). You are probably using this approach without knowing it, and by deleting the cookies you effectively erase their matching sessions as you remove the unique session identifier contained in the cookies.

If you don't need the DATETIME value in the rest of your code, it'd be more efficient, simple and secure to use an UPDATE query with a sub-select, something like

UPDATE products SET t=(SELECT f FROM products WHERE id=17) WHERE id=42;

or in case it's in the same row in a single table, just

UPDATE products SET t=f WHERE id=42;

Your count never equals the value 100 so your loop will continue until that is true

Replace your while clause with

def gukan(count):
    while count < 100:
      print(count)
      count=count+3;
gukan(0)

and this will fix your problem, the program is executing correctly given the conditions you have given it.

A little error checking goes a long way -- you can always test the value of errno or call perror() or strerror() to get more information about why the fopen() call failed.

Otherwise the suggestions about checking the path are probably correct... most likely you're not in the directory you think you are from the IDE and don't have the permissions you expect.

An easy, loop-free alternative is to use the horizontalalignment Text property as a keyword argument to xticks[1]. In the below, at the commented line, I've forced the xticks alignment to be "right".

n=5
x = np.arange(n)
y = np.sin(np.linspace(-3,3,n))
xlabels = ['Long ticklabel %i' % i for i in range(n)]
fig, ax = plt.subplots()
ax.plot(x,y, 'o-')

plt.xticks(
        [0,1,2,3,4],
        ["this label extends way past the figure's left boundary",
        "bad motorfinger", "green", "in the age of octopus diplomacy", "x"], 
        rotation=45,
        horizontalalignment="right")    # here
plt.show()

(yticks already aligns the right edge with the tick by default, but for xticks the default appears to be "center".)

[1] You find that described in the xticks documentation if you search for the phrase "Text properties".

Throwing an exception will be good especially if you want to clarify the error reason:

throw "Error Message"

This will generate a terminating error.

You just can put your query as a subquery:

SELECT avg(count)
  FROM 
    (
    SELECT COUNT (*) AS Count
      FROM Table T
     WHERE T.Update_time =
               (SELECT MAX (B.Update_time )
                  FROM Table B
                 WHERE (B.Id = T.Id))
    GROUP BY T.Grouping
    ) as counts

Edit: I think this should be the same:

SELECT count(*) / count(distinct T.Grouping)
  FROM Table T
 WHERE T.Update_time =
           (SELECT MAX (B.Update_time)
              FROM Table B
             WHERE (B.Id = T.Id))

Another intuitive way is :- Suppose we want to find Nth highest salary then

1) Sort Employee as per descending order of salary

2) Take first N records using rownum. So in this step Nth record here is Nth highest salary

3) Now sort this temporary result in ascending order. Thus Nth highest salary is now first record

4) Get first record from this temporary result.

It will be Nth highest salary.

select * from 
 (select * from 
   (select * from  
       (select * from emp order by sal desc)  
   where rownum<=:N )  
 order by sal )
where rownum=1;

In case there are repeating salaries then in innermost query distinct can be used.

select * from 
 (select * from 
   (select * from  
       (select distinct(sal) from emp order by 1 desc)  
   where rownum<=:N )  
 order by sal )
where rownum=1;

1. Under the "Account Name" Drop Box choose Browse. Type the user name that you used to log in to windows on the "Enter the object name to select" and then click "Check Names". Click "Ok".

2. Under "Password" just type the password that you used for windows login.

I created a function to get an array with the values ??for the fields and to join. This goes in the model:

  public function GetDataWhereExtenseJoin($table,$fields,$data) {
    //pega os campos passados para o select
    foreach($fields as $coll => $value){
        $this->db->select($value);
    }
    //pega a tabela
    $this->db->from($table);
    //pega os campos do join
    foreach($data as $coll => $value){
        $this->db->join($coll, $value);
    }
    //obtem os valores
    $query = $this->db->get();
    //retorna o resultado
    return $query->result();

}

This goes in the controller:

$data_field = array(
        'NameProduct' => 'product.IdProduct',
        'IdProduct' => 'product.NameProduct',
        'NameCategory' => 'category.NameCategory',
        'IdCategory' => 'category.IdCategory'
        );
    $data_join = array
                    ( 'product' => 'product_category.IdProduct = product.IdProduct',
                      'category' => 'product_category.IdCategory = category.IdCategory',
                      'product' => 'product_category.IdProduct = product.IdProduct'
                    );
    $product_category = $this->mmain->GetDataWhereExtenseJoin('product_category', $data_field, $data_join);

result:

echo '<pre>';
    print_r($product_category);
    die;

When using the for loop, the value of s is a Map.Entry element, meaning that you can get the key from s.key and the value from s.value

You can use attrchange jQuery plugin. The main function of the plugin is to bind a listener function on attribute change of HTML elements.

Code sample:

$("#myDiv").attrchange({
    trackValues: true, // set to true so that the event object is updated with old & new values
    callback: function(evnt) {
        if(evnt.attributeName == "display") { // which attribute you want to watch for changes
            if(evnt.newValue.search(/inline/i) == -1) {

                // your code to execute goes here...
            }
        }
    }
});

Use this code:

 HttpContext.Current.Server.MapPath("~")

Detailed Reference:

Server.MapPath specifies the relative or virtual path to map to a physical directory.

• Server.MapPath(".") returns the current physical directory of the file (e.g. aspx) being executed
• Server.MapPath("..") returns the parent directory
• Server.MapPath("~") returns the physical path to the root of the application
• Server.MapPath("/") returns the physical path to the root of the domain name (is not necessarily the same as the root of the application)

An example:

Let's say you pointed a web site application (http://www.example.com/) to

C:\Inetpub\wwwroot

and installed your shop application (sub web as virtual directory in IIS, marked as application) in

D:\WebApps\shop

For example, if you call Server.MapPath in following request:

http://www.example.com/shop/products/GetProduct.aspx?id=2342

then:

Server.MapPath(".") returns D:\WebApps\shop\products
Server.MapPath("..") returns D:\WebApps\shop
Server.MapPath("~") returns D:\WebApps\shop
Server.MapPath("/") returns C:\Inetpub\wwwroot
Server.MapPath("/shop") returns D:\WebApps\shop

If Path starts with either a forward (/) or backward slash (), the MapPath method returns a path as if Path were a full, virtual path.

If Path doesn't start with a slash, the MapPath method returns a path relative to the directory of the request being processed.

Note: in C#, @ is the verbatim literal string operator meaning that the string should be used "as is" and not be processed for escape sequences.

Footnotes

Server.MapPath(null) and Server.MapPath("") will produce this effect too.

g1 here is a DataFrame. It has a hierarchical index, though:

In [19]: type(g1)
Out[19]: pandas.core.frame.DataFrame

In [20]: g1.index
Out[20]: 
MultiIndex([('Alice', 'Seattle'), ('Bob', 'Seattle'), ('Mallory', 'Portland'),
       ('Mallory', 'Seattle')], dtype=object)

Perhaps you want something like this?

In [21]: g1.add_suffix('_Count').reset_index()
Out[21]: 
      Name      City  City_Count  Name_Count
0    Alice   Seattle           1           1
1      Bob   Seattle           2           2
2  Mallory  Portland           2           2
3  Mallory   Seattle           1           1

Or something like:

In [36]: DataFrame({'count' : df1.groupby( [ "Name", "City"] ).size()}).reset_index()
Out[36]: 
      Name      City  count
0    Alice   Seattle      1
1      Bob   Seattle      2
2  Mallory  Portland      2
3  Mallory   Seattle      1

Are you using virtualenv? If yes, deactivate the virtualenv. If you are not using, it is already installed widely (system level). Try to upgrade package.

pip install flake8 --upgrade

To remove borders between cells, while retaining the border around the table, add the attribute rules=none to the table tag.

There is no way in HTML to achieve the rendering specified in the last figure of the question. There are various tricky workarounds that are based on using some other markup structure.

@scottf

An enum is like a Singleton. The JVM creates the instance.

If you would create it by yourself with classes it could be look like that

public static class MyEnum {

    final public static MyEnum ONE;
    final public static MyEnum TWO;

    static {
        ONE = new MyEnum("1");
        TWO = new MyEnum("2");
    }

    final String enumValue;

    private MyEnum(String value){
        enumValue = value;    
    }

    @Override
    public String toString(){
        return enumValue;
    }


}

And could be used like that:

public class HelloWorld{

   public static class MyEnum {

       final public static MyEnum ONE;
       final public static MyEnum TWO;

       static {
          ONE = new MyEnum("1");
          TWO = new MyEnum("2");
       }

       final String enumValue;

       private MyEnum(String value){
           enumValue = value;    
       }

       @Override
       public String toString(){
           return enumValue;
       }


   }

    public static void main(String []args){

       System.out.println(MyEnum.ONE);
       System.out.println(MyEnum.TWO);

       System.out.println(MyEnum.ONE == MyEnum.ONE);

       System.out.println("Hello World");
    }
}

Just to keep it backward compatible I load Crockfords JSON-library from cloudflare CDN if no native JSON support is given (for simplicity using jQuery):

function winHasJSON(){
  json_data = JSON.stringify(obj);
  // ... (do stuff with json_data)
}
if(typeof JSON === 'object' && typeof JSON.stringify === 'function'){
  winHasJSON();
} else {
  $.getScript('//cdnjs.cloudflare.com/ajax/libs/json2/20121008/json2.min.js', winHasJSON)
}

Droiddraw is good. I have been using it since long and haven't faced any issues yet (though it crashes sometimes, but thats ok)

I had the same problem and found out that you have to escape spaces in the extra:

adb shell am broadcast -a com.whereismywifeserver.intent.TEST --es sms_body "test\ from\ adb"

So instead of "test from adb" it should be "test\ from\ adb"

This is a very tricky problem since, at least for Symfony 2.0 and Doctrine 2.1, it is not possible in any way to reopen the EntityManager after it closes.

The only way I found to overcome this problem is to create your own DBAL Connection class, wrap the Doctrine one and provide exception handling (e.g. retrying several times before popping the exception out to the EntityManager). It is a bit hacky and I'm afraid it can cause some inconsistency in transactional environments (i.e. I'm not really sure of what happens if the failing query is in the middle of a transaction).

An example configuration to go for this way is:

doctrine:
  dbal:
    default_connection: default
    connections:
      default:
        driver:   %database_driver%
        host:     %database_host%
        user:     %database_user%
        password: %database_password%
        charset:  %database_charset%
        wrapper_class: Your\DBAL\ReopeningConnectionWrapper

The class should start more or less like this:

namespace Your\DBAL;

class ReopeningConnectionWrapper extends Doctrine\DBAL\Connection {
  // ...
}

A very annoying thing is that you have to override each method of Connection providing your exception-handling wrapper. Using closures can ease some pain there.

Hi you can do it this way

    temp = sp.coo_matrix((data, (row, col)), shape=(3, 59))
    temp1 = temp.tocsr()

    #Cosine similarity
    row_sums = ((temp1.multiply(temp1)).sum(axis=1))
    rows_sums_sqrt = np.array(np.sqrt(row_sums))[:,0]
    row_indices, col_indices = temp1.nonzero()
    temp1.data /= rows_sums_sqrt[row_indices]
    temp2 = temp1.transpose()
    temp3 = temp1*temp2

Here is the same style as in large datasets:

x = df[:5]
y = pd.DataFrame([['...']*df.shape[1]], columns=df.columns, index=['...'])
z = df[-5:]
frame = [x, y, z]
result = pd.concat(frame)

print(result)

Output:

                     date  temp
0     1981-01-01 00:00:00  20.7
1     1981-01-02 00:00:00  17.9
2     1981-01-03 00:00:00  18.8
3     1981-01-04 00:00:00  14.6
4     1981-01-05 00:00:00  15.8
...                   ...   ...
3645  1990-12-27 00:00:00    14
3646  1990-12-28 00:00:00  13.6
3647  1990-12-29 00:00:00  13.5
3648  1990-12-30 00:00:00  15.7
3649  1990-12-31 00:00:00    13

This works because Integer::min resolves to an implementation of the Comparator<Integer> interface.

The method reference of Integer::min resolves to Integer.min(int a, int b), resolved to IntBinaryOperator, and presumably autoboxing occurs somewhere making it a BinaryOperator<Integer>.

And the min() resp max() methods of the Stream<Integer> ask the Comparator<Integer> interface to be implemented.
Now this resolves to the single method Integer compareTo(Integer o1, Integer o2). Which is of type BinaryOperator<Integer>.

And thus the magic has happened as both methods are a BinaryOperator<Integer>.

To answer the second part of your question, to convert to binary you can use a format string and the ord function:

>>> byte = 'a'
>>> '{0:08b}'.format(ord(byte))
'01100001'

Note that the format pads with the right number of leading zeros, which seems to be your requirement. This method needs Python 2.6 or later.

I have just installed mongodb 3.4 with homebrew.(brew install mongodb) It looks for /data/db by default.

https://docs.mongodb.com/manual/tutorial/install-mongodb-on-os-x/

Yes, there are software algorithms for calculating sin too. Basically, calculating these kind of stuff with a digital computer is usually done using numerical methods like approximating the Taylor series representing the function.

Numerical methods can approximate functions to an arbitrary amount of accuracy and since the amount of accuracy you have in a floating number is finite, they suit these tasks pretty well.

I think flock is probably the easiest (and most memorable) variant. I use it in a cron job to auto-encode dvds and cds

# try to run a command, but fail immediately if it's already running
flock -n /var/lock/myjob.lock   my_bash_command

Use -w for timeouts or leave out options to wait until the lock is released. Finally, the man page shows a nice example for multiple commands:

   (
     flock -n 9 || exit 1
     # ... commands executed under lock ...
   ) 9>/var/lock/mylockfile

What if you need any database operation in SuperGirl you would inject it again into SuperGirl.

I think the main idea is using the same object reference in different classes. So what about this:

//There is no annotation about Spring in the abstract part.
abstract class SuperMan {


    private final DatabaseService databaseService;

    public SuperMan(DatabaseService databaseService) {
     this.databaseService = databaseService;
    }

    abstract void Fly();

    protected void doSuperPowerAction(Thing thing) {

        //busy code

        databaseService.save(thing);

    }
}

@Component
public class SuperGirl extends SuperMan {

private final DatabaseService databaseService;

@Autowired
public SuperGirl (DatabaseService databaseService) {
     super(databaseService);
     this.databaseService = databaseService;
    }

@Override
public void Fly() {
    //busy code
}

public doSomethingSuperGirlDoes() {

    //busy code

    doSuperPowerAction(thing)

}

In my opinion, inject once run everywhere :)

The colorbar has to have its own axes. However, you can create an axes that overlaps with the previous one. Then use the cax kwarg to tell fig.colorbar to use the new axes.

For example:

import numpy as np
import matplotlib.pyplot as plt

data = np.arange(100, 0, -1).reshape(10, 10)

fig, ax = plt.subplots()
cax = fig.add_axes([0.27, 0.8, 0.5, 0.05])

im = ax.imshow(data, cmap='gist_earth')
fig.colorbar(im, cax=cax, orientation='horizontal')
plt.show()

Here is how I did it by trial and error.

ScrollView - (the outer wrapper).

    LinearLayout (child-1).

        LinearLayout (child-1a).

        LinearLayout (child-1b).

Since ScrollView can have only one child, that child is a linear layout. Then all the other layout types occur in the first linear layout. I haven't tried to include a relative layout yet, but they drive me nuts so I will wait until my sanity returns.

Try this code:

Drawable thumb = ContextCompat.getDrawable(getActivity(), R.mipmap.cir_32);
mSeekBar.setThumb(thumb);

You can use a bool combination query with must/must_not which gives great performance and returns all records where the field is not null and not empty.

bool must_not is like "NOT AND" which means field!="", bool must exist means its !=null.

so effectively enabling: where field1!=null and field1!=""

GET  IndexName/IndexType/_search
{
    "query": {
        "bool": {
            "must": [{
                "bool": {
                    "must_not": [{
                        "term": { "YourFieldName": ""}
                    }]
                }
            }, {
                "bool": {
                    "must": [{
                      "exists" : { "field" : "YourFieldName" }
                    }]
                }
            }]
        }   
    }
}

ElasticSearch Version:

  "version": {
    "number": "5.6.10",
    "lucene_version": "6.6.1"
  }

Your current code:

ggplot(histogram, aes(f0, fill = utt)) + geom_histogram(alpha = 0.2)

is telling ggplot to construct one histogram using all the values in f0 and then color the bars of this single histogram according to the variable utt.

What you want instead is to create three separate histograms, with alpha blending so that they are visible through each other. So you probably want to use three separate calls to geom_histogram, where each one gets it's own data frame and fill:

ggplot(histogram, aes(f0)) + 
    geom_histogram(data = lowf0, fill = "red", alpha = 0.2) + 
    geom_histogram(data = mediumf0, fill = "blue", alpha = 0.2) +
    geom_histogram(data = highf0, fill = "green", alpha = 0.2) +

Here's a concrete example with some output:

dat <- data.frame(xx = c(runif(100,20,50),runif(100,40,80),runif(100,0,30)),yy = rep(letters[1:3],each = 100))

ggplot(dat,aes(x=xx)) + 
    geom_histogram(data=subset(dat,yy == 'a'),fill = "red", alpha = 0.2) +
    geom_histogram(data=subset(dat,yy == 'b'),fill = "blue", alpha = 0.2) +
    geom_histogram(data=subset(dat,yy == 'c'),fill = "green", alpha = 0.2)

which produces something like this:

Edited to fix typos; you wanted fill, not colour.

HTML in line styling example:

<td style='text-align:center; vertical-align:middle'></td> 

CSS file example:

td {
    text-align: center;
    vertical-align: middle;
}

Simulated Multiple Inheritance Pattern
http://www.codeproject.com/KB/architecture/smip.aspx

First off, EC2 and Elastic Compute Cloud are the same thing.

Next, AWS encompasses the range of Web Services that includes EC2 and Elastic Beanstalk. It also includes many others such as S3, RDS, DynamoDB, and all the others.

EC2

EC2 is Amazon's service that allows you to create a server (AWS calls these instances) in the AWS cloud. You pay by the hour and only what you use. You can do whatever you want with this instance as well as launch n number of instances.

Elastic Beanstalk

Elastic Beanstalk is one layer of abstraction away from the EC2 layer. Elastic Beanstalk will setup an "environment" for you that can contain a number of EC2 instances, an optional database, as well as a few other AWS components such as a Elastic Load Balancer, Auto-Scaling Group, Security Group. Then Elastic Beanstalk will manage these items for you whenever you want to update your software running in AWS. Elastic Beanstalk doesn't add any cost on top of these resources that it creates for you. If you have 10 hours of EC2 usage, then all you pay is 10 compute hours.

Running Wordpress

For running Wordpress, it is whatever you are most comfortable with. You could run it straight on a single EC2 instance, you could use a solution from the AWS Marketplace, or you could use Elastic Beanstalk.

What to pick?

In the case that you want to reduce system operations and just focus on the website, then Elastic Beanstalk would be the best choice for that. Elastic Beanstalk supports a PHP stack (as well as others). You can keep your site in version control and easily deploy to your environment whenever you make changes. It will also setup an Autoscaling group which can spawn up more EC2 instances if traffic is growing.

Here's the first result off of Google when searching for "elastic beanstalk wordpress": https://www.otreva.com/blog/deploying-wordpress-amazon-web-services-aws-ec2-rds-via-elasticbeanstalk/

you have done it the correct way using

curl_setopt($ch, CURLOPT_POSTFIELDS,$body);

but i notice your missing

curl_setopt($ch, CURLOPT_POST,1);

Why not loop through the inputs and then add onclick handlers to each?

You don't have to do this in HTML, but you can add a handler to each button like:

button.onclick = function(){ DoStuff(this.value); return false; } // return false; so that form does not submit

Then your function could "do stuff" according to whichever value you passed:

function DoStuff(val) {
    if( val === "Val 1" ) {
        // Do some stuff
    }
    // Do other stuff
}

Try this:

var scrollHeight = $(scrollable)[0] == document ? document.body.scrollHeight : $(scrollable)[0].scrollHeight;

Author of the topic asked how to clear the queue "efficiently", so I assume he wants better complexity than linear O(queue size). Methods served by David Rodriguez, anon have the same complexity: according to STL reference, operator = has complexity O(queue size). IMHO it's because each element of queue is reserved separately and it isn't allocated in one big memory block, like in vector. So to clear all memory, we have to delete every element separately. So the straightest way to clear std::queue is one line:

while(!Q.empty()) Q.pop();

Observations on an interesting Switch case trap --> fall through of switch

"The break statements are necessary because without them, statements in switch blocks fall through:" Java Doc's example

Snippet of consecutive case without break:

    char c = 'A';/* switch with lower case */;
    switch(c) {
        case 'a':
            System.out.println("a");
        case 'A':
            System.out.println("A");
            break;
    }

O/P for this case is:

A

But if you change value of c, i.e., char c = 'a';, then this get interesting.

O/P for this case is:

a A

Even though the 2nd case test fails, program goes onto print A, due to missing break which causes switch to treat the rest of the code as a block. All statements after the matching case label are executed in sequence.

The comp.lang.c FAQ deals with the question

"What's the correct declaration of main()?"

use inline-block instead of inline. Read more information here about the difference between inline and inline-block.

.inline { 
display: inline-block; 
border: 1px solid red; 
margin:10px;
}

DEMO

The git pull -X theirs answers may create an ugly merge commit, or issue an

error: Your local changes to the following files would be overwritten by merge:

If you want to simply ignore any local modifications to files from the repo, for example on a client that should always be a mirror of an origin, run this (replace master with the branch you want):

git fetch && git reset --hard origin/master

How does it work? git fetch does git pull but without merge. Then git reset --hard makes your working tree match the last commit. All of your local changes to files in the repo will be discarded, but new local files will be left alone.

if(!File.Exists(filename)) //No File? Create
{
    fs = File.Create(filename);
    fs.Close();
}
if(File.ReadAllBytes().Length >= 100*1024*1024) // (100mB) File to big? Create new
{
    string filenamebase = "myLogFile"; //Insert the base form of the log file, the same as the 1st filename without .log at the end
    if(filename.contains("-")) //Check if older log contained -x
    {
         int lognumber = Int32.Parse(filename.substring(filename.lastIndexOf("-")+1, filename.Length-4); //Get old number, Can cause exception if the last digits aren't numbers
         lognumber++; //Increment lognumber by 1
         filename = filenamebase + "-" + lognumber + ".log"; //Override filename
    }
    else 
    {
         filename = filenamebase + "-1.log"; //Override filename
    }
    fs = File.Create(filename);
    fs.Close();
}

Refer link:

http://www.codeproject.com/Questions/163337/How-to-write-in-log-Files-in-C

There are tons of sample code online as to how to do this.

Here is just one example of how to do this: http://geekswithblogs.net/dotNETvinz/archive/2009/04/30/creating-a-simple-registration-form-in-asp.net.aspx

you define the text boxes between the following tag:

<form id="form1" runat="server"> 

you create your textboxes and define them to runat="server" like so:

<asp:TextBox ID="TxtName" runat="server"></asp:TextBox>

define a button to process your logic like so (notice the onclick):

<asp:Button ID="Button1" runat="server" Text="Save" onclick="Button1_Click" />

in the code behind, you define what you want the server to do if the user clicks on the button by defining a method named

protected void Button1_Click(object sender, EventArgs e)

or you could just double click the button in the design view.

Here is a very quick sample of code to insert into a table in the button click event (codebehind)

protected void Button1_Click(object sender, EventArgs e)
{
   string name = TxtName.Text; // Scrub user data

   string connString = ConfigurationManager.ConnectionStrings["yourconnstringInWebConfig"].ConnectionString;
   SqlConnection conn = null;
   try
   {
          conn = new SqlConnection(connString);
          conn.Open();

          using(SqlCommand cmd = new SqlCommand())
          {
                 cmd.Conn = conn;
                 cmd.CommandType = CommandType.Text;
                 cmd.CommandText = "INSERT INTO dummyTable(name) Values (@var)";
                 cmd.Parameters.AddWithValue("@var", name);
                 int rowsAffected = cmd.ExecuteNonQuery();
                 if(rowsAffected ==1)
                 {
                        //Success notification
                 }
                 else
                 {
                        //Error notification
                 }
          }
   }
   catch(Exception ex)
   {
          //log error 
          //display friendly error to user
   }
   finally
   {
          if(conn!=null)
          {
                 //cleanup connection i.e close 
          }
   }
}

For current datetime, you can use now() function in postgresql insert query.

You can also refer following link.

insert statement in postgres for data type timestamp without time zone NOT NULL,.

Code: for row in data:
Error message: TypeError: 'NoneType' object is not iterable

Which object is it complaining about? Choice of two, row and data. In for row in data, which needs to be iterable? Only data.

What's the problem with data? Its type is NoneType. Only None has type NoneType. So data is None.

You can verify this in an IDE, or by inserting e.g. print "data is", repr(data) before the for statement, and re-running.

Think about what you need to do next: How should "no data" be represented? Do we write an empty file? Do we raise an exception or log a warning or keep silent?

The middle letter of an odd-length word is irrelevant in determining whether the word is a palindrome. Just ignore it.

Hint: all you need is a slight tweak to the following line to make this work for all word lengths:

secondHalf = word[finalWordLength + 1:]

P.S. If you insist on handling the two cases separately, if len(word) % 2: ... would tell you that the word has an odd number of characters.

Adding a padding between the divs to simulate a gap might be a hack, but why not use something Bootstrap provides. It's called offsets. But again, you can define a class in your custom.css (you shouldn't edit the core stylesheet anyway) file and add something like .gap. However, .col-md-offset-* does the job most of the times for me, allowing me to precisely leave a gap between the divs.

As for vertical spacing, unfortunately, there isn't anything set built-in like that in Bootstrap 3, so you will have to invent your own custom class to do that. I'd usually do something like .top-buffer { margin-top:20px; }. This does the trick, and obviously, it doesn't have to be 20px, it can be anything you like.

    val = val < MIN ? MIN : ( val > MAX ? MAX : val);

You are writing if(true) so it will always show "Hello " message.

You should take decision on the basis of value of n returned.

Your JRE_HOME does not need to point to the "bin" directory. Just set it to C:\Program Files\Java\jre1.8.0_25

Putting ListView inside a ScrollView is never inspired. But if you want your posted XML-like behavior, there're 3 options to me:

1. Remove ScrollView: Removing your ScrollView, you may give the ListViews some specific size with respect to the total layout (either specific dp or layout_weight).

2. Replace ListViews with LinearLayouts: You may add the list-items by iterating through the item-list and add each item-view to the respective LinearLayout by inflating the view & setting the respective data (string, image etc.)

3. If you really need to put your ListViews inside the ScrollView, you must make your ListViews non-scrollable (Which is practically the same as the solution 2 above, but with ListView codes), otherwise the layout won't function as you expect.
   To make a ListView non-scrollable, you may read this SO post, where the precise solution to me is like the one below:

listView.setOnTouchListener(new OnTouchListener() {_x000D_
  public boolean onTouch(View v, MotionEvent event) {_x000D_
    return (event.getAction() == MotionEvent.ACTION_MOVE);_x000D_
  }_x000D_
});

From the Web Designer’s Guide to PNG Image Format

PNG-8 and PNG-24

There are two PNG formats: PNG-8 and PNG-24. The numbers are shorthand for saying "8-bit PNG" or "24-bit PNG." Not to get too much into technicalities — because as a web designer, you probably don’t care — 8-bit PNGs mean that the image is 8 bits per pixel, while 24-bit PNGs mean 24 bits per pixel.

To sum up the difference in plain English: Let’s just say PNG-24 can handle a lot more color and is good for complex images with lots of color such as photographs (just like JPEG), while PNG-8 is more optimized for things with simple colors, such as logos and user interface elements like icons and buttons.

Another difference is that PNG-24 natively supports alpha transparency, which is good for transparent backgrounds. This difference is not 100% true because Adobe products’ Save for Web command allows PNG-8 with alpha transparency.

The best way to understand is to simply think from top to bottom ( Large Desktops to Mobile Phones)

Firstly, as B3 is mobile first so if you use xs then the columns will be same from Large desktops to xs ( i recommend using xs or sm as this will keep everything the way you want on every screen size )

Secondly if you want to give different width to columns on different devices or resolutions, than you can add multiple classes e.g

the above will change the width according to the screen resolutions, REMEMBER i am keeping the total columns in each class = 12

I hope my answer would help!

Write a new class that holds all the values that you need and use the new class's object as the value in your HashMap

HashMap<String, MyObject>

class MyObject {
public String value1;
public int value2;
public List<String> value3;
}

You can use display: table-cell property as in the following code:

div {
     height: 100%;
     display: table-cell; 
     vertical-align: middle;
    }

<html>  
<head>  
<script language="javascript" type="text/javascript">  
function SetFocus(InputID)  
{  
   document.getElementById(InputID).focus();  
}  
</script>  
</head>  
<body onload="SetFocus('Box2')">  
<input id="Box1" size="30" /><br/>  
<input id="Box2" size="30" />  
</body>  
</html>  

Many people will suggest you use MERGE, but I caution you against it. By default, it doesn't protect you from concurrency and race conditions any more than multiple statements, but it does introduce other dangers:

http://www.mssqltips.com/sqlservertip/3074/use-caution-with-sql-servers-merge-statement/

Even with this "simpler" syntax available, I still prefer this approach (error handling omitted for brevity):

SET TRANSACTION ISOLATION LEVEL SERIALIZABLE;
BEGIN TRANSACTION;
UPDATE dbo.table SET ... WHERE PK = @PK;
IF @@ROWCOUNT = 0
BEGIN
  INSERT dbo.table(PK, ...) SELECT @PK, ...;
END
COMMIT TRANSACTION;

A lot of folks will suggest this way:

SET TRANSACTION ISOLATION LEVEL SERIALIZABLE;
BEGIN TRANSACTION;
IF EXISTS (SELECT 1 FROM dbo.table WHERE PK = @PK)
BEGIN
  UPDATE ...
END
ELSE
BEGIN
  INSERT ...
END
COMMIT TRANSACTION;

But all this accomplishes is ensuring you may need to read the table twice to locate the row(s) to be updated. In the first sample, you will only ever need to locate the row(s) once. (In both cases, if no rows are found from the initial read, an insert occurs.)

Others will suggest this way:

BEGIN TRY
  INSERT ...
END TRY
BEGIN CATCH
  IF ERROR_NUMBER() = 2627
    UPDATE ...
END CATCH

However, this is problematic if for no other reason than letting SQL Server catch exceptions that you could have prevented in the first place is much more expensive, except in the rare scenario where almost every insert fails. I prove as much here:

• http://www.mssqltips.com/sqlservertip/2632/checking-for-potential-constraint-violations-before-entering-sql-server-try-and-catch-logic/
• http://www.sqlperformance.com/2012/08/t-sql-queries/error-handling

Not sure what you think you gain by having a single statement; I don't think you gain anything. MERGE is a single statement but it still has to really perform multiple operations anyway - even though it makes you think it doesn't.

6 years later... I found this post and I liked more the numpy aproach:

import numpy as np
dates_array = np.array(['2013-01-01', '2013-01-15', '2013-01-30']).astype('datetime64[ns]')
truncated_dates = dates_array.astype('datetime64[D]')

cheers

For doing this you can use this

 title.setPaintFlags(title.getPaintFlags() | Paint.STRIKE_THRU_TEXT_FLAG);

and for remove you can use this

 title.setPaintFlags(title.getPaintFlags() & (~Paint.STRIKE_THRU_TEXT_FLAG));

Gradle 4.9+

gradle run --args='arg1 arg2'

This assumes your build.gradle is configured with the Application plugin. Your build.gradle should look similar to this:

plugins {
  // Implicitly applies Java plugin
  id: 'application'
}

application {
  // URI of your main class/application's entry point (required)
  mainClassName = 'org.gradle.sample.Main'
}

Pre-Gradle 4.9

Include the following in your build.gradle:

run {
    if (project.hasProperty("appArgs")) {
        args Eval.me(appArgs)
    }
}

Then to run: gradle run -PappArgs="['arg1', 'args2']"

You can use figure to create a new plot, for example, or use close after the first plot.

See oracle docs

public static boolean parseBoolean(String s) {
        return ((s != null) && s.equalsIgnoreCase("true"));
    }

__FILE__ is the filename with extension of the file containing the code being executed.

In foo.rb, __FILE__ would be "foo.rb".

If foo.rb were in the dir /home/josh then File.dirname(__FILE__) would return /home/josh.

Sounds like you're expecting size_t to be the same as unsigned long (possibly 64 bits) when it's actually an unsigned int (32 bits). Try using %zu in both cases.

I'm not entirely certain though.

Thanks a lot it was really very helpful.. I was able to run my TestNG classes using command line, but still I would like to wrap-up the things one last time as follows..

1) Set the classpath for the testng.jar in the environment variables
(either manually or via command line).

2) Create a new folder "MyTest".

3) Compile all your classes(testNG+java) and put them(.class files )
in a new folder "Mytest\bin".

4) Put your 'testng.xml' and '.properties' files to "Mytest\bin"
again.

5) Put all the .jar files (testng,selenium... etc) in a new folder
"Mytest\lib".

6) Browse to the folder "bin" via command line and run the command
java -cp "..\lib\*;" org.testng.TestNG testng.xml

this should run your testNG cases.

Simple solution: The sequence is really matter while including the auto complete libraries:

<link href="http://code.jquery.com/ui/1.10.2/themes/smoothness/jquery-ui.css" rel="Stylesheet"></link>
<script src='https://cdn.rawgit.com/pguso/jquery-plugin-circliful/master/js/jquery.circliful.min.js'></script>
<script src="http://code.jquery.com/ui/1.10.2/jquery-ui.js" ></script>

Based on Roberts answer, here is my function. This works for me if the element or its parent have been faded out via jQuery, can either get inner or outer dimensions and also returns the offset values.

/edit1: rewrote the function. it's now smaller and can be called directly on the object

/edit2: the function will now insert the clone just after the original element instead of the body, making it possible for the clone to maintain inherited dimensions.

$.fn.getRealDimensions = function (outer) {
    var $this = $(this);
    if ($this.length == 0) {
        return false;
    }
    var $clone = $this.clone()
        .show()
        .css('visibility','hidden')
        .insertAfter($this);        
    var result = {
        width:      (outer) ? $clone.outerWidth() : $clone.innerWidth(), 
        height:     (outer) ? $clone.outerHeight() : $clone.innerHeight(), 
        offsetTop:  $clone.offset().top, 
        offsetLeft: $clone.offset().left
    };
    $clone.remove();
    return result;
}

var dimensions = $('.hidden').getRealDimensions();

You don't need to necessarily use Objects, you can do it with normal multi-dimensional Arrays.

This is my solution without Objects:

// Javascript
const matrix = [];

matrix.key1 = [
  'value1',
  'value2',
];

matrix.key2 = [
  'value3',
];

which in PHP is equivalent to:

// PHP
$matrix = [
    "key1" => [
        'value1',
        'value2',
    ],
    "key2" => [
        'value3',
    ]
];

You're running the code before the DOM is loaded.

Try this:

Live example:

http://jsfiddle.net/FvMYz/

$(function() {    // Makes sure the code contained doesn't run until
                  //     all the DOM elements have loaded

    $('#colorselector').change(function(){
        $('.colors').hide();
        $('#' + $(this).val()).show();
    });

});

There are few changes I would like to notify. You can access request, JSON, error from response object from now on.

        let urlstring = "Add URL String here"
        let parameters: [String: AnyObject] = [
            "IdQuiz" : 102,
            "IdUser" : "iosclient",
            "User" : "iosclient",
            "List": [
                [
                    "IdQuestion" : 5,
                    "IdProposition": 2,
                    "Time" : 32
                ],
                [
                    "IdQuestion" : 4,
                    "IdProposition": 3,
                    "Time" : 9
                ]
            ]
        ]

        Alamofire.request(.POST, urlstring, parameters: parameters, encoding: .JSON).responseJSON { response in
            print(response.request)  // original URL request
            print(response.response) // URL response
            print(response.data)     // server data
            print(response.result)   // result of response serialization

            if let JSON = response.result.value {
                print("JSON: \(JSON)")
            }
            response.result.error
        }

Use:

/category[@name='Sport' and author/text()[1]='James Small']

or use:

/category[@name='Sport' and author[starts-with(.,'James Small')]]

It is a good rule to try to avoid using the // pseudo-operator whenever possible, because its evaluation can typically be very slow.

Also:

./somename

is equivalent to:

somename

so it is recommended to use the latter.

It's even easier to use parent > child selector relationship so the inner div do not need to have their css classes to be defined explicitly:

.display-table {_x000D_
    display: table; _x000D_
}_x000D_
.display-table > div { _x000D_
    display: table-row; _x000D_
}_x000D_
.display-table > div > div { _x000D_
    display: table-cell;_x000D_
    padding: 5px;_x000D_
}

<div class="display-table">_x000D_
    <div>_x000D_
        <div>0, 0</div>_x000D_
        <div>0, 1</div>_x000D_
    </div>_x000D_
    <div>_x000D_
        <div>1, 0</div>_x000D_
        <div>1, 1</div>_x000D_
    </div>_x000D_
</div>

Don't use string.replace("px", ""));

Use parseInt or parseFloat!

Yes, there is better. Check the stat or the fstat function

Have you tried (from a command line)

java -jar jbpm-installer-3.2.7.jar

or double clicking it with the mouse ?

Found this and this by googling.

Hope it helps

UITableView's selectRowAtIndexPath:animated:scrollPosition: should do the trick.

Just pass UITableViewScrollPositionNone for scrollPosition and the user won't see any movement.

You should also be able to manually run the action:

[theTableView.delegate tableView:theTableView didSelectRowAtIndexPath:indexPath]

after you selectRowAtIndexPath:animated:scrollPosition: so the highlight happens as well as any associated logic.

Swift You can use following function to open Settings App with Bluetooth Page

func openSettingsApp(){
    if let settings = NSURL(string: "prefs:root=Bluetooth") {
        UIApplication.sharedApplication().openURL(settings)
    }
}

Again this would not open the App's Settings. This would open settings app with Bluetooth as this is deep linking to bluetooth.

strdup and strndup are defined in POSIX compliant systems as:

char *strdup(const char *str);
char *strndup(const char *str, size_t len);

The strdup() function allocates sufficient memory for a copy of the string str, does the copy, and returns a pointer to it.

The pointer may subsequently be used as an argument to the function free.

If insufficient memory is available, NULL is returned and errno is set to ENOMEM.

The strndup() function copies at most len characters from the string str always null terminating the copied string.