Thanks to biggates and steakpi. As answer of question Dreamonic, I made a little changes to make all headers clickable (not only title string and gluphs) and took off underline from link. To force an icons appear on same line I added h4 at the end of CSS instructions. Here is the modified code:
<div class="panel-group" id="accordion">
<div class="panel panel-default">
<div class="panel-heading">
<a class="accordion-toggle collapsed" data-toggle="collapse" data-parent="#accordion" href="#collapseOne">
<h4 class="panel-title">Collapsible Group Item #1</h4>
</a>
</div>
<div id="collapseOne" class="panel-collapse collapse">
<div class="panel-body">
Anim pariatur cliche reprehenderit, enim eiusmod high life accusamus terry richardson ad squid. 3 wolf moon officia aute, non cupidatat skateboard dolor brunch. Food truck quinoa nesciunt laborum eiusmod. Brunch 3 wolf moon tempor, sunt aliqua put a bird on it squid single-origin coffee nulla assumenda shoreditch et. Nihil anim keffiyeh helvetica, craft beer labore wes anderson cred nesciunt sapiente ea proident. Ad vegan excepteur butcher vice lomo. Leggings occaecat craft beer farm-to-table, raw denim aesthetic synth nesciunt you probably haven't heard of them accusamus labore sustainable VHS.
</div>
</div>
</div>
<div class="panel panel-default">
<div class="panel-heading">
<a class="accordion-toggle collapsed" data-toggle="collapse" data-parent="#accordion" href="#collapseTwo">
<h4 class="panel-title">Collapsible Group Item #2</h4>
</a>
</div>
<div id="collapseTwo" class="panel-collapse collapse">
<div class="panel-body">
Anim pariatur cliche reprehenderit, enim eiusmod high life accusamus terry richardson ad squid. 3 wolf moon officia aute, non cupidatat skateboard dolor brunch. Food truck quinoa nesciunt laborum eiusmod. Brunch 3 wolf moon tempor, sunt aliqua put a bird on it squid single-origin coffee nulla assumenda shoreditch et. Nihil anim keffiyeh helvetica, craft beer labore wes anderson cred nesciunt sapiente ea proident. Ad vegan excepteur butcher vice lomo. Leggings occaecat craft beer farm-to-table, raw denim aesthetic synth nesciunt you probably haven't heard of them accusamus labore sustainable VHS.
</div>
</div>
</div>
<div class="panel panel-default">
<div class="panel-heading">
<a class="accordion-toggle collapsed" data-toggle="collapse" data-parent="#accordion" href="#collapseThree">
<h4 class="panel-title">Collapsible Group Item #3</h4>
</a>
</div>
<div id="collapseThree" class="panel-collapse collapse">
<div class="panel-body">
Anim pariatur cliche reprehenderit, enim eiusmod high life accusamus terry richardson ad squid. 3 wolf moon officia aute, non cupidatat skateboard dolor brunch. Food truck quinoa nesciunt laborum eiusmod. Brunch 3 wolf moon tempor, sunt aliqua put a bird on it squid single-origin coffee nulla assumenda shoreditch et. Nihil anim keffiyeh helvetica, craft beer labore wes anderson cred nesciunt sapiente ea proident. Ad vegan excepteur butcher vice lomo. Leggings occaecat craft beer farm-to-table, raw denim aesthetic synth nesciunt you probably haven't heard of them accusamus labore sustainable VHS.
</div>
</div>
</div>
</div>
And the modified CSS:
.panel-heading .accordion-toggle h4:after {
/* symbol for "opening" panels */
font-family: 'Glyphicons Halflings';
content: "\e114";
float: right;
color: grey;
overflow: no-display;
}
.panel-heading .accordion-toggle.collapsed h4:after {
/* symbol for "collapsed" panels */
content: "\e080";
}
a.accordion-toggle{
text-decoration: none;
}
Before you start reinventing the wheel with one of these answers, check out the Material Card widget. It also allows you to define a global style via the app theme directly:
This comes from the official site of Chome-devtools and it helps. Here i quote:
- Queuing If a request is queued it indicated that:
- The request was postponed by the rendering engine because it's considered lower priority than critical resources (such as scripts/styles). This often happens with images.
- The request was put on hold to wait for an unavailable TCP socket that's about to free up.
- The request was put on hold because the browser only allows six TCP connections per origin on HTTP 1. Time spent making disk cache entries (typically very quick.)
- Stalled/Blocking Time the request spent waiting before it could be sent. It can be waiting for any of the reasons described for Queueing. Additionally, this time is inclusive of any time spent in proxy negotiation.
The usage info:
Usage: brew switch <formula> <version>
Example:
brew switch mysql 5.5.29
You can find the versions installed on your system with info
.
brew info mysql
And to see the available versions to install, you can provide a dud version number, as brew will helpfully respond with the available version numbers:
brew switch mysql 0
Update (15.10.2014):
The brew versions
command has been removed from brew, but, if you do wish to use this command first run brew tap homebrew/boneyard
.
The recommended way to install an old version is to install from the homebrew/versions
repo as follows:
$ brew tap homebrew/versions
$ brew install mysql55
For detailed info on all the ways to install an older version of a formula read this answer.
If anyone wants to get the count with based on multiple conditions than here is a sample custom query
@Query("select count(sl) from SlUrl sl where sl.user =?1 And sl.creationDate between ?2 And ?3")
long countUrlsBetweenDates(User user, Date date1, Date date2);
If you have loads of re-directs to create, having loads of virtual directories over the places is a nightmare to maintain. You could try using ISAPI redirect an IIS extension. Then all you re-directs are managed in one place.
http://www.isapirewrite.com/docs/
It allows also you to match patterns based on reg ex expressions etc. I've used where I've had to re-direct 100's of pages and its saved a lot of time.
You needed to do it like this:
<h2 style="text-align: center;font-family: Tahoma">TITLE</h2>
_x000D_
Hope it helped.
<layer-list xmlns:android="http://schemas.android.com/apk/res/android">
<item>
<rotate
android:fromDegrees="45"
android:pivotX="135%"
android:pivotY="1%"
android:toDegrees="45">
<shape android:shape="rectangle">
<stroke
android:width="-60dp"
android:color="@android:color/transparent" />
<solid android:color="@color/orange" />
</shape>
</rotate>
</item>
</layer-list>
I have fixed the problem with starting the service with startService(intent)
instead of Context.startForeground()
and calling startForegound()
immediately after super.OnCreate()
. Additionally, if you starting service on boot, you can start Activity that starts service on the boot broadcast. Although it is not a permanent solution, it works.
Note to new readers: This answer is old and and not terribly practical - it's just "clever" because it uses Array stuff to get String things done. When I wrote "less process" I definitely meant "less code" because, as others have noted in subsequent answers, it performs like a pig. So don't use it if speed matters to you.
I'd put this function onto the String object directly. Instead of creating an array, filling it, and joining it with an empty char, just create an array of the proper length, and join it with your desired string. Same result, less process!
String.prototype.repeat = function( num )
{
return new Array( num + 1 ).join( this );
}
alert( "string to repeat\n".repeat( 4 ) );
I tried joonty's answer, but I also got the
exec: 1: not found
error. This is what works best for me (confirmed to work in zsh also):
#!/bin/bash
LOG_FILE=/tmp/both.log
exec > >(tee ${LOG_FILE}) 2>&1
echo "this is stdout"
chmmm 77 /makeError
The file /tmp/both.log afterwards contains
this is stdout
chmmm command not found
The /tmp/both.log is appended unless you remove the -a from tee.
Hint: >(...)
is a process substitution. It lets the exec
to the tee
command as if it were a file.
You must declare your MyComponentComponent in the same module of your AppComponent.
import { AppComponent } from '...';
import { MyComponentComponent } from '...';
@NgModule({
declarations: [ AppComponent, MyComponentComponent ],
bootstrap: [ AppComponent ]
})
export class AppModule {}
Aside from the one being ANSI and speed etc., there is a very important difference that always matters to me; more than ANSI and speed. The number of bugs I have fixed due to this important overlook is large. I look for this during code reviews all the time.
-- Arrange
create table Employee (EmployeeId int);
insert into dbo.Employee values (1);
insert into dbo.Employee values (2);
insert into dbo.Employee values (3);
-- Act
declare @employeeId int;
select @employeeId = e.EmployeeId from dbo.Employee e;
-- Assert
-- This will print 3, the last EmployeeId from the query (an arbitrary value)
-- Almost always, this is not what the developer was intending.
print @employeeId;
Almost always, that is not what the developer is intending. In the above, the query is straight forward but I have seen queries that are quite complex and figuring out whether it will return a single value or not, is not trivial. The query is often more complex than this and by chance it has been returning single value. During developer testing all is fine. But this is like a ticking bomb and will cause issues when the query returns multiple results. Why? Because it will simply assign the last value to the variable.
Now let's try the same thing with SET
:
-- Act
set @employeeId = (select e.EmployeeId from dbo.Employee e);
You will receive an error:
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
That is amazing and very important because why would you want to assign some trivial "last item in result" to the @employeeId
. With select
you will never get any error and you will spend minutes, hours debugging.
Perhaps, you are looking for a single Id and SET
will force you to fix your query. Thus you may do something like:
-- Act
-- Notice the where clause
set @employeeId = (select e.EmployeeId from dbo.Employee e where e.EmployeeId = 1);
print @employeeId;
Cleanup
drop table Employee;
In conclusion, use:
SET
: When you want to assign a single value to a variable and your variable is for a single value.SELECT
: When you want to assign multiple values to a variable. The variable may be a table, temp table or table variable etc. For a web design I was recently given I had to solve the centered and unknown amount of text in a fixed circle issue and I thought I'd share the solution here for other people looking into circle/text combos.
The main issue I had was text would often break the bounds of the circle. To solve this I ended up using 4 divs. One rectangular container that specified the max (fixed) boundaries of the circle. Inside that would be the div that draws the circle with its width and height set to 100% so changing the size of the parent changes the size of the actual circle. Inside that would be another rectangular div which, using %'s, would create a text boundary area preventing any text leaving the circle (for the most part) Then finally the actual div for the text and vertical centering.
It makes more sense as code:
/* Main Container - this controls the size of the circle */_x000D_
.circle_container_x000D_
{_x000D_
width : 128px;_x000D_
height : 128px;_x000D_
margin : 0;_x000D_
padding : 0;_x000D_
/* border : 1px solid red; */_x000D_
}_x000D_
_x000D_
/* Circle Main draws the actual circle */_x000D_
.circle_main_x000D_
{_x000D_
width : 100%;_x000D_
height : 100%;_x000D_
border-radius : 50%;_x000D_
border : 2px solid black; /* can alter thickness and colour of circle on this line */_x000D_
margin : 0;_x000D_
padding : 0;_x000D_
}_x000D_
_x000D_
/* Circle Text Container - constrains text area to within the circle */_x000D_
.circle_text_container_x000D_
{_x000D_
/* area constraints */_x000D_
width : 70%;_x000D_
height : 70%;_x000D_
max-width : 70%;_x000D_
max-height : 70%;_x000D_
margin : 0;_x000D_
padding : 0;_x000D_
_x000D_
/* some position nudging to center the text area */_x000D_
position : relative;_x000D_
left : 15%;_x000D_
top : 15%;_x000D_
_x000D_
/* preserve 3d prevents blurring sometimes caused by the text centering in the next class */_x000D_
transform-style : preserve-3d;_x000D_
_x000D_
/*border : 1px solid green;*/_x000D_
}_x000D_
_x000D_
/* Circle Text - the appearance of the text within the circle plus vertical centering */_x000D_
.circle_text_x000D_
{_x000D_
/* change font/size/etc here */_x000D_
font: 11px "Tahoma", Arial, Serif; _x000D_
text-align : center;_x000D_
_x000D_
/* vertical centering technique */_x000D_
position : relative;_x000D_
top : 50%;_x000D_
transform : translateY(-50%);_x000D_
}
_x000D_
<div class="circle_container">_x000D_
<div class="circle_main">_x000D_
<div class="circle_text_container">_x000D_
<div class = "circle_text">_x000D_
Here is an example of some text in my circle._x000D_
</div>_x000D_
</div>_x000D_
</div>_x000D_
</div>
_x000D_
You can uncomment the border colours on the container divs to see how it constrains.
Things to be aware of: You can still break the bounds of the circle if you put too much text in or use words/unbroken text that are too long. It's still not a good fit for completely unknown text (such as user input) but works best when you know vaguely what the largest amount of text you'll need to store is and set your circle size and font sizes accordingly. You can set the text container div to hide any overflow of course, but that may just look "broken" and is no replacement for actually accounting for max size properly in your design.
Hope this is useful to someone! HTML/CSS is not my main discipline so I'm sure it can be improved on!
Maven requires JDK to compile. In Eclipse you need to CHANGE/ REPLACE your JRE to the JDK path that your JAVA_HOME points to. Navigate to Window > Preferences > Java > Installed JREs.
Make sure that the maven-compiler-plugin in you pom.xml has the source and target of the java version in your JAVA_HOME
http://learn-automation.com/maven-no-compiler-is-provided-in-this-environment-selenium/
The same origin policy is applicable only for browser side programming languages. So if you try to post to a different server than the origin server using JavaScript, then the same origin policy comes into play but if you post directly from the form i.e. the action points to a different server like:
<form action="http://someotherserver.com">
and there is no javascript involved in posting the form, then the same origin policy is not applicable.
See wikipedia for more information
This is the definitive answer for a teradata node admin.
Go to your /etc/hosts
file and create a list of IP's or node names in a text file.
SMP007-1
SMP007-2
SMP007-3
Put the following script in a file.
#set a password across all nodes
printf "User ID: "
read MYUSERID
printf "New Password: "
read MYPASS
while read -r i; do
echo changing password on "$i"
ssh root@"$i" sudo echo "$MYUSERID":"$MYPASS" | chpasswd
echo password changed on "$i"
done< /usr/bin/setpwd.srvrs
Okay I know I've broken a cardinal security rule with ssh and root but I'll let you security folks deal with it.
Now put this in your /usr/bin
subdir along with your setpwd.srvrs
config file.
When you run the command it prompts you one time for the User ID
then one time for the password. Then the script traverses all nodes
in the setpwd.srvrs
file and does a passwordless ssh to each node,
then sets the password without any user interaction or secondary
password validation.
equals()
(javadoc) must define an equivalence relation (it must be reflexive, symmetric, and transitive). In addition, it must be consistent (if the objects are not modified, then it must keep returning the same value). Furthermore, o.equals(null)
must always return false.
hashCode()
(javadoc) must also be consistent (if the object is not modified in terms of equals()
, it must keep returning the same value).
The relation between the two methods is:
Whenever
a.equals(b)
, thena.hashCode()
must be same asb.hashCode()
.
If you override one, then you should override the other.
Use the same set of fields that you use to compute equals()
to compute hashCode()
.
Use the excellent helper classes EqualsBuilder and HashCodeBuilder from the Apache Commons Lang library. An example:
public class Person {
private String name;
private int age;
// ...
@Override
public int hashCode() {
return new HashCodeBuilder(17, 31). // two randomly chosen prime numbers
// if deriving: appendSuper(super.hashCode()).
append(name).
append(age).
toHashCode();
}
@Override
public boolean equals(Object obj) {
if (!(obj instanceof Person))
return false;
if (obj == this)
return true;
Person rhs = (Person) obj;
return new EqualsBuilder().
// if deriving: appendSuper(super.equals(obj)).
append(name, rhs.name).
append(age, rhs.age).
isEquals();
}
}
When using a hash-based Collection or Map such as HashSet, LinkedHashSet, HashMap, Hashtable, or WeakHashMap, make sure that the hashCode() of the key objects that you put into the collection never changes while the object is in the collection. The bulletproof way to ensure this is to make your keys immutable, which has also other benefits.
The same way you do it with "normal" state in React class components.
example:
function App() {
const [state, setState] = useState([]);
return (
<div>
<p>You clicked {state.join(" and ")}</p>
//destructuring
<button onClick={() => setState([...state, "again"])}>Click me</button>
//old way
<button onClick={() => setState(state.concat("again"))}>Click me</button>
</div>
);
}
Let say we are creating a drop down list of currency:
List _currency = ["INR", "USD", "SGD", "EUR", "PND"];
List<DropdownMenuItem<String>> _dropDownMenuCurrencyItems;
String _currentCurrency;
List<DropdownMenuItem<String>> getDropDownMenuCurrencyItems() {
List<DropdownMenuItem<String>> items = new List();
for (String currency in _currency) {
items.add(
new DropdownMenuItem(value: currency, child: new Text(currency)));
}
return items;
}
void changedDropDownItem(String selectedCurrency) {
setState(() {
_currentCurrency = selectedCurrency;
});
}
Add below code in body part:
new Row(children: <Widget>[
new Text("Currency: "),
new Container(
padding: new EdgeInsets.all(16.0),
),
new DropdownButton(
value: _currentCurrency,
items: _dropDownMenuCurrencyItems,
onChanged: changedDropDownItem,
)
])
In a nutshell, three easy rules to remember PECS:
<? extends T>
wildcard if you need to retrieve object of
type T
from a collection.<? super T>
wildcard if you need to put objects of type T
in
a collection.The main image manager in PIL
is PIL
's Image
module.
from PIL import Image
import math
foo = Image.open("path\\to\\image.jpg")
x, y = foo.size
x2, y2 = math.floor(x-50), math.floor(y-20)
foo = foo.resize((x2,y2),Image.ANTIALIAS)
foo.save("path\\to\\save\\image_scaled.jpg",quality=95)
You can add optimize=True
to the arguments of you want to decrease the size even more, but optimize only works for JPEG's and PNG's.
For other image extensions, you could decrease the quality of the new saved image.
You could change the size of the new image by just deleting a bit of code and defining the image size and you can only figure out how to do this if you look at the code carefully.
I defined this size:
x, y = foo.size
x2, y2 = math.floor(x-50), math.floor(y-20)
just to show you what is (almost) normally done with horizontal images. For vertical images you might do:
x, y = foo.size
x2, y2 = math.floor(x-20), math.floor(y-50)
. Remember, you can still delete that bit of code and define a new size.
This is due to the fact that your element is dynamically created. You should use event delegation to handle the event.
document.addEventListener('click',function(e){
if(e.target && e.target.id== 'brnPrepend'){
//do something
}
});
jquery makes it easier:
$(document).on('click','#btnPrepend',function(){//do something})
Here is an article about event delegation event delegation article
I've had this happen before with Spring @ResponseBody and it was because there was no accept header sent with the request. Accept header can be a pain to set with jQuery, but this worked for me source
$.postJSON = function(url, data, callback) {
return jQuery.ajax({
headers: {
'Accept': 'application/json',
'Content-Type': 'application/json'
},
'type': 'POST',
'url': url,
'data': JSON.stringify(data),
'dataType': 'json',
'success': callback
});
};
The Content-Type header is used by @RequestBody to determine what format the data being sent from the client in the request is. The accept header is used by @ResponseBody to determine what format to sent the data back to the client in the response. That's why you need both headers.
Try match
:
df <- data.frame(name=letters[1:4], value=c(rep(TRUE, 2), rep(FALSE, 2)))
target <- c("b", "c", "a", "d")
df[match(target, df$name),]
name value
2 b TRUE
3 c FALSE
1 a TRUE
4 d FALSE
It will work as long as your target
contains exactly the same elements as df$name
, and neither contain duplicate values.
From ?match
:
match returns a vector of the positions of (first) matches of its first argument
in its second.
Therefore match
finds the row numbers that matches target
's elements, and then we return df
in that order.
For swift 4
@IBOutlet weak var someView: UIView!
let gesture = UITapGestureRecognizer(target: self, action: #selector (self.someAction (_:)))
self.someView.addGestureRecognizer(gesture)
@objc func someAction(_ sender:UITapGestureRecognizer){
print("view was clicked")
}
As I can see the array is of String only.For each loop can be used to get individual element of the array and put them in local inner class for use.
Below is the code snippet for it :
//WorkAround
for (String color : colors ){
String pos = Character.toUpperCase(color.charAt(0)) + color.substring(1);
JMenuItem Jmi =new JMenuItem(pos);
Jmi.setIcon(new IconA(color));
Jmi.addActionListener(new ActionListener() {
@Override
public void actionPerformed(ActionEvent e) {
JMenuItem item = (JMenuItem) e.getSource();
IconA icon = (IconA) item.getIcon();
// HERE YOU USE THE String color variable and no errors!!!
Color kolorIkony = getColour(color);
textArea.setForeground(kolorIkony);
}
});
mnForeground.add(Jmi);
}
}
There is a very good article written by: Claudio Bernasconi's TechBlog here: When to use IEnumerable, ICollection, IList and List
Here some basics points about scenarios and functions:
You could use ROW_NUMBER()
with a ORDER BY
clause in sub-query and use this column in replacement of TOP N
. This can be explained step-by-step.
See the below table which have two columns NAME
and DT_CREATED
.
If you need to take only the first two dates irrespective of NAME
, you could use the below query. The logic has been written inside query
-- The number of records can be specified in WHERE clause
SELECT RNO,NAME,DT_CREATED
FROM
(
-- Generates numbers in a column in sequence in the order of date
SELECT ROW_NUMBER() OVER (ORDER BY DT_CREATED) AS RNO,
NAME,DT_CREATED
FROM DEMOTOP
)TAB
WHERE RNO<3;
RESULT
In some situations, we need to select TOP N
results respective to each NAME
. In such case we can use PARTITION BY
with an ORDER BY
clause in sub-query. Refer the below query.
-- The number of records can be specified in WHERE clause
SELECT RNO,NAME,DT_CREATED
FROM
(
--Generates numbers in a column in sequence in the order of date for each NAME
SELECT ROW_NUMBER() OVER (PARTITION BY NAME ORDER BY DT_CREATED) AS RNO,
NAME,DT_CREATED
FROM DEMOTOP
)TAB
WHERE RNO<3;
RESULT
It's simple code to convert that to all lower case.
Not so simple to convert "true" back to "True", however.
true.ToString().ToLower()
is what I use for xml output.
You can use find_all
in the following way to find every a
element that has an href
attribute, and print each one:
from BeautifulSoup import BeautifulSoup
html = '''<a href="some_url">next</a>
<span class="class"><a href="another_url">later</a></span>'''
soup = BeautifulSoup(html)
for a in soup.find_all('a', href=True):
print "Found the URL:", a['href']
The output would be:
Found the URL: some_url
Found the URL: another_url
Note that if you're using an older version of BeautifulSoup (before version 4) the name of this method is findAll
. In version 4, BeautifulSoup's method names were changed to be PEP 8 compliant, so you should use find_all
instead.
If you want all tags with an href
, you can omit the name
parameter:
href_tags = soup.find_all(href=True)
After Ctrl+End, you can do the Ctrl+A to select all in the buffer and then paste into Excel. Excel even put each Oracle column into its own column instead of squishing the whole row into one column. Nice..
Another option which has not been suggested here is to run the app you want to monitor in the Android emulator from the Android SDK. You can then easily capture the traffic with wireshark on the same machine.
This was the easiest option for me.
click()
to the QMainWindow custom slot you have created).Code example:
MainWindow.h
// ...
include "newwindow.h"
// ...
public slots:
void openNewWindow();
// ...
private:
NewWindow *mMyNewWindow;
// ...
}
MainWindow.cpp
// ...
MainWindow::MainWindow()
{
// ...
connect(mMyButton, SIGNAL(click()), this, SLOT(openNewWindow()));
// ...
}
// ...
void MainWindow::openNewWindow()
{
mMyNewWindow = new NewWindow(); // Be sure to destroy your window somewhere
mMyNewWindow->show();
// ...
}
This is an example on how display a custom new window. There are a lot of ways to do this.
Ask Tom on pagination and very, very useful analytic functions.
This is excerpt from that page:
select * from (
select /*+ first_rows(25) */
object_id,object_name,
row_number() over
(order by object_id) rn
from all_objects
)
where rn between :n and :m
order by rn;
See http://adamalbrecht.com/2013/12/12/creating-a-simple-modal-dialog-directive-in-angular-js/ for a simple way of doing modal dialog with Angular and without needing bootstrap
Edit: I've since been using ng-dialog from http://likeastore.github.io/ngDialog which is flexible and doesn't have any dependencies.
On Windows/Linux press Alt+F3.
You can check how this query works following this link.
IF OBJECT_ID('tempdb..#spacetable') IS NOT NULL
DROP TABLE tempdb..#spacetable
create table #spacetable
(
database_name varchar(50) ,
total_size_data int,
space_util_data int,
space_data_left int,
percent_fill_data float,
total_size_data_log int,
space_util_log int,
space_log_left int,
percent_fill_log char(50),
[total db size] int,
[total size used] int,
[total size left] int
)
insert into #spacetable
EXECUTE master.sys.sp_MSforeachdb 'USE [?];
select x.[DATABASE NAME],x.[total size data],x.[space util],x.[total size data]-x.[space util] [space left data],
x.[percent fill],y.[total size log],y.[space util],
y.[total size log]-y.[space util] [space left log],y.[percent fill],
y.[total size log]+x.[total size data] ''total db size''
,x.[space util]+y.[space util] ''total size used'',
(y.[total size log]+x.[total size data])-(y.[space util]+x.[space util]) ''total size left''
from (select DB_NAME() ''DATABASE NAME'',
sum(size*8/1024) ''total size data'',sum(FILEPROPERTY(name,''SpaceUsed'')*8/1024) ''space util''
,case when sum(size*8/1024)=0 then ''divide by zero'' else
substring(cast((sum(FILEPROPERTY(name,''SpaceUsed''))*1.0*100/sum(size)) as CHAR(50)),1,6) end ''percent fill''
from sys.master_files where database_id=DB_ID(DB_NAME()) and type=0
group by type_desc ) as x ,
(select
sum(size*8/1024) ''total size log'',sum(FILEPROPERTY(name,''SpaceUsed'')*8/1024) ''space util''
,case when sum(size*8/1024)=0 then ''divide by zero'' else
substring(cast((sum(FILEPROPERTY(name,''SpaceUsed''))*1.0*100/sum(size)) as CHAR(50)),1,6) end ''percent fill''
from sys.master_files where database_id=DB_ID(DB_NAME()) and type=1
group by type_desc )y'
select * from #spacetable
order by database_name
drop table #spacetable
You are so close! All you need to do is select BOTH the home and its max date time, then join back to the topten
table on BOTH fields:
SELECT tt.*
FROM topten tt
INNER JOIN
(SELECT home, MAX(datetime) AS MaxDateTime
FROM topten
GROUP BY home) groupedtt
ON tt.home = groupedtt.home
AND tt.datetime = groupedtt.MaxDateTime
This worked for me in swift:
Create a subclass of UITableViewCell (make sure you link up your cell in the storyboard)
class MyTableCell:UITableViewCell{
override func layoutSubviews() {
super.layoutSubviews()
if(self.imageView?.image != nil){
let cellFrame = self.frame
let textLabelFrame = self.textLabel?.frame
let detailTextLabelFrame = self.detailTextLabel?.frame
let imageViewFrame = self.imageView?.frame
self.imageView?.contentMode = .ScaleAspectFill
self.imageView?.clipsToBounds = true
self.imageView?.frame = CGRectMake((imageViewFrame?.origin.x)!,(imageViewFrame?.origin.y)! + 1,40,40)
self.textLabel!.frame = CGRectMake(50 + (imageViewFrame?.origin.x)! , (textLabelFrame?.origin.y)!, cellFrame.width-(70 + (imageViewFrame?.origin.x)!), textLabelFrame!.height)
self.detailTextLabel!.frame = CGRectMake(50 + (imageViewFrame?.origin.x)!, (detailTextLabelFrame?.origin.y)!, cellFrame.width-(70 + (imageViewFrame?.origin.x)!), detailTextLabelFrame!.height)
}
}
}
In cellForRowAtIndexPath , dequeue the cell as your new cell type:
let cell = tableView.dequeueReusableCellWithIdentifier("MyCell", forIndexPath: indexPath) as! MyTableCell
Obviously change number values to suit your layout
The exception occurs due to this statement,
called_from.equalsIgnoreCase("add")
It seem that the previous statement
String called_from = getIntent().getStringExtra("called");
returned a null reference.
You can check whether the intent to start this activity contains such a key "called".
I was searching how to do something similar in WPF and I got this solution:
<ItemsControl ItemsSource="{Binding MyItems,Mode=OneWay}">
<ItemsControl.ItemsPanel>
<ItemsPanelTemplate>
<StackPanel Orientation="Vertical" />
</ItemsPanelTemplate>
</ItemsControl.ItemsPanel>
<ItemsControl.ItemTemplate>
<DataTemplate>
<RadioButton
Content="{Binding}"
Command="{Binding Path=DataContext.CustomCommand,
RelativeSource={RelativeSource Mode=FindAncestor,
AncestorType={x:Type ItemsControl}} }"
CommandParameter="{Binding}" />
</DataTemplate>
</ItemsControl.ItemTemplate>
I hope this works for somebody else. I have a data context which is set automatically to the ItemsControls, and this data context has two properties: MyItems
-which is a collection-, and one command 'CustomCommand'. Because of the ItemTemplate
is using a DataTemplate
, the DataContext
of upper levels is not directly accessible. Then the workaround to get the DC of the parent is use a relative path and filter by ItemsControl
type.
Unfortunately, C++ does not allow you to directly get a callable object referring to an object and one of its member functions. &Foo::doSomething
gives you a "pointer to member function" which refers to the member function but not the associated object.
There are two ways around this, one is to use std::bind
to bind the "pointer to member function" to the this
pointer. The other is to use a lambda that captures the this
pointer and calls the member function.
std::function<void(void)> f = std::bind(&Foo::doSomething, this);
std::function<void(void)> g = [this](){doSomething();};
I would prefer the latter.
With g++ at least binding a member function to this will result in an object three-pointers in size, assigning this to an std::function
will result in dynamic memory allocation.
On the other hand, a lambda that captures this
is only one pointer in size, assigning it to an std::function
will not result in dynamic memory allocation with g++.
While I have not verified this with other compilers, I suspect similar results will be found there.
What is meta_key
? Strip out all of the meta_value
conditionals, reduce, and you end up with this:
SELECT
*
FROM
meta_data
WHERE
(
(meta_key = 'lat')
)
AND
(
(meta_key = 'long')
)
GROUP BY
item_id
Since meta_key
can never simultaneously equal two different values, no results will be returned.
Based on comments throughout this question and answers so far, it sounds like you're looking for something more along the lines of this:
SELECT
*
FROM
meta_data
WHERE
(
(meta_key = 'lat')
AND
(
(meta_value >= '60.23457047672217')
OR
(meta_value <= '60.23457047672217')
)
)
OR
(
(meta_key = 'long')
AND
(
(meta_value >= '24.879140853881836')
OR
(meta_value <= '24.879140853881836')
)
)
GROUP BY
item_id
Note the OR
between the top-level conditionals. This is because you want records which are lat
or long
, since no single record will ever be lat
and long
.
I'm still not sure what you're trying to accomplish by the inner conditionals. Any non-null value will match those numbers. So maybe you can elaborate on what you're trying to do there. I'm also not sure about the purpose of the GROUP BY
clause, but that might be outside the context of this question entirely.
I am using below solution for IIS hosting in ASP.NET compatibility mode. Credits to Rodney Viana's MSDN blog.
Add following to your web.config under appSettings:
<add key="LogPath" value="C:\\logpath" />
<add key="LogRequestResponse" value="true" />
Replace your global.asax.cs with below (also fix namespace name):
using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Web.Security;
using System.Web.SessionState;
using System.Text;
using System.IO;
using System.Configuration;
namespace Yournamespace
{
public class Global : System.Web.HttpApplication
{
protected static bool LogFlag;
protected static string fileNameBase;
protected static string ext = "log";
// One file name per day
protected string FileName
{
get
{
return String.Format("{0}{1}.{2}", fileNameBase, DateTime.Now.ToString("yyyy-MM-dd"), ext);
}
}
protected void Application_Start(object sender, EventArgs e)
{
LogFlag = bool.Parse(ConfigurationManager.AppSettings["LogRequestResponse"].ToString());
fileNameBase = ConfigurationManager.AppSettings["LogPath"].ToString() + @"\C5API-";
}
protected void Session_Start(object sender, EventArgs e)
{
}
protected void Application_BeginRequest(object sender, EventArgs e)
{
if (LogFlag)
{
// Creates a unique id to match Rquests with Responses
string id = String.Format("Id: {0} Uri: {1}", Guid.NewGuid(), Request.Url);
FilterSaveLog input = new FilterSaveLog(HttpContext.Current, Request.Filter, FileName, id);
Request.Filter = input;
input.SetFilter(false);
FilterSaveLog output = new FilterSaveLog(HttpContext.Current, Response.Filter, FileName, id);
output.SetFilter(true);
Response.Filter = output;
}
}
protected void Application_AuthenticateRequest(object sender, EventArgs e)
{
}
protected void Application_Error(object sender, EventArgs e)
{
}
protected void Session_End(object sender, EventArgs e)
{
}
protected void Application_End(object sender, EventArgs e)
{
}
}
class FilterSaveLog : Stream
{
protected static string fileNameGlobal = null;
protected string fileName = null;
protected static object writeLock = null;
protected Stream sinkStream;
protected bool inDisk;
protected bool isClosed;
protected string id;
protected bool isResponse;
protected HttpContext context;
public FilterSaveLog(HttpContext Context, Stream Sink, string FileName, string Id)
{
// One lock per file name
if (String.IsNullOrWhiteSpace(fileNameGlobal) || fileNameGlobal.ToUpper() != fileNameGlobal.ToUpper())
{
fileNameGlobal = FileName;
writeLock = new object();
}
context = Context;
fileName = FileName;
id = Id;
sinkStream = Sink;
inDisk = false;
isClosed = false;
}
public void SetFilter(bool IsResponse)
{
isResponse = IsResponse;
id = (isResponse ? "Reponse " : "Request ") + id;
//
// For Request only read the incoming stream and log it as it will not be "filtered" for a WCF request
//
if (!IsResponse)
{
AppendToFile(String.Format("at {0} --------------------------------------------", DateTime.Now));
AppendToFile(id);
if (context.Request.InputStream.Length > 0)
{
context.Request.InputStream.Position = 0;
byte[] rawBytes = new byte[context.Request.InputStream.Length];
context.Request.InputStream.Read(rawBytes, 0, rawBytes.Length);
context.Request.InputStream.Position = 0;
AppendToFile(rawBytes);
}
else
{
AppendToFile("(no body)");
}
}
}
public void AppendToFile(string Text)
{
byte[] strArray = Encoding.UTF8.GetBytes(Text);
AppendToFile(strArray);
}
public void AppendToFile(byte[] RawBytes)
{
bool myLock = System.Threading.Monitor.TryEnter(writeLock, 100);
if (myLock)
{
try
{
using (FileStream stream = new FileStream(fileName, FileMode.OpenOrCreate, FileAccess.ReadWrite))
{
stream.Position = stream.Length;
stream.Write(RawBytes, 0, RawBytes.Length);
stream.WriteByte(13);
stream.WriteByte(10);
}
}
catch (Exception ex)
{
string str = string.Format("Unable to create log. Type: {0} Message: {1}\nStack:{2}", ex, ex.Message, ex.StackTrace);
System.Diagnostics.Debug.WriteLine(str);
System.Diagnostics.Debug.Flush();
}
finally
{
System.Threading.Monitor.Exit(writeLock);
}
}
}
public override bool CanRead
{
get { return sinkStream.CanRead; }
}
public override bool CanSeek
{
get { return sinkStream.CanSeek; }
}
public override bool CanWrite
{
get { return sinkStream.CanWrite; }
}
public override long Length
{
get
{
return sinkStream.Length;
}
}
public override long Position
{
get { return sinkStream.Position; }
set { sinkStream.Position = value; }
}
//
// For WCF this code will never be reached
//
public override int Read(byte[] buffer, int offset, int count)
{
int c = sinkStream.Read(buffer, offset, count);
return c;
}
public override long Seek(long offset, System.IO.SeekOrigin direction)
{
return sinkStream.Seek(offset, direction);
}
public override void SetLength(long length)
{
sinkStream.SetLength(length);
}
public override void Close()
{
sinkStream.Close();
isClosed = true;
}
public override void Flush()
{
sinkStream.Flush();
}
// For streamed responses (i.e. not buffered) there will be more than one Response (but the id will match the Request)
public override void Write(byte[] buffer, int offset, int count)
{
sinkStream.Write(buffer, offset, count);
AppendToFile(String.Format("at {0} --------------------------------------------", DateTime.Now));
AppendToFile(id);
AppendToFile(buffer);
}
}
}
It should create log file in the folder LogPath with request and response XML.
This is what a constant expression in Java looks like:
package com.mycompany.mypackage;
public class MyLinks {
// constant expression
public static final String GUESTBOOK_URL = "/guestbook";
}
You can use it with annotations as following:
import com.mycompany.mypackage.MyLinks;
@WebServlet(urlPatterns = {MyLinks.GUESTBOOK_URL})
public class GuestbookServlet extends HttpServlet {
// ...
}
You can add "issue time" to token and maintain "last logout time" for each user on the server. When you check token validity, also check "issue time" be after "last logout time".
This can also happen when you forget to make a first commit.
I wrote a function to conveniently print things to the console.
// function for debugging stuff
function print(...x) {
console.log(JSON.stringify(x,null,4));
}
// how to call it
let obj = { a: 1, b: [2,3] };
print('hello',123,obj);
will output in console:
[
"hello",
123,
{
"a": 1,
"b": [
2,
3
]
}
]
You need a more specific expression. Try grep " OK$"
or grep "[0-9]* OK"
. You want to choose a pattern that matches what you want, but won't match what you don't want. That pattern will depend upon what your whole file contents might look like.
You can also do: grep -w "OK"
which will only match a whole word "OK", such as "1 OK" but won't match "1OK" or "OKFINE".
$ cat test.txt | grep -w "OK"
1 OK
2 OK
4 OK
I used the second solution of user147767
However, there is a typo here. It should be
curCssName.toUpperCase().indexOf(cssName.toUpperCase() + ':') < 0
not <= 0
I also changed this condition for:
!curCssName.match(new RegExp(cssName + "(-.+)?:"), "mi")
as sometimes we add a css property over jQuery, and it's added in a different way for different browsers (i.e. the border property will be added as "border" for Firefox, and "border-top", "border-bottom" etc for IE).
To disable UAC go to Start>Control Panel>User Accounts there you will find an option Turn User Account Control on or off just click on it and uncheck User Account Control to help protect your computer click OK.
Please refer to this link : https://community.apachefriends.org/f/viewtopic.php?f=16&t=45364
If you learn Python first and then Java. I think it plays the same role as __str__()
method in Python, it is a magic method like __dict__()
and __init__()
but to refer to a string representing the the object.
Here is how to do dump the database (with just the schema):
mysqldump -u root -p"passwd" --no-data --add-drop-database --databases my_db_name | sed 's#/[*]!40000 DROP DATABASE IF EXISTS my_db_name;#' >my_db_name.sql
If you also want the data, remove the --no-data
option.
You can use exec
:
exec("import myapp.commands.%s" % command)
toast("Your Message")
OR
toast(R.string.some_message)
Just add two methods in your BaseActivity
. Or create new BaseActivity
if you are not already using.
public class BaseActivity extends AppCompatActivity {
public void toast(String msg) {
Toast.makeText(this, msg, Toast.LENGTH_SHORT).show();
}
public void toast(@StringRes int msg) {
Toast.makeText(this, msg, Toast.LENGTH_SHORT).show();
}
}
and extend all your activities by BaseActivity
.
public class MainActivity extends BaseActivity
An Int
(or TinyInt
) aligned to an Enum
field would be my methodology.
First, if you have a single bit
field in a database, the row will still use a full byte, so as far as space savings, it only pays off if you have multiple bit
fields.
Second, strings/chars have a "magic value" feel to them, regardless of how obvious they may seem at design time. Not to mention, it lets people store just about any value they would not necessarily map to anything obvious.
Third, a numeric value is much easier (and better practice) to create a lookup table for, in order to enforce referential integrity, and can correlate 1-to-1 with an enum, so there is parity in storing the value in memory within the application or in the database.
=(B0+4)/($A$0)
$ means keep same (press a few times F4 after typing A4 to flip through combos quick!)
That's an easy one:
[aView convertPoint:localPosition toView:nil];
... converts a point in local coordinate space to window coordinates. You can use this method to calculate a view's origin in window space like this:
[aView.superview convertPoint:aView.frame.origin toView:nil];
2014 Edit: Looking at the popularity of Matt__C's comment it seems reasonable to point out that the coordinates...
I had same problem since updated platfrom-tool to version 24 and not sure for root cause...(current adb version is 1.0.36)
Also try adb kill-server
and adb start-server
but problem still happened
but when I downgrade adb version to 1.0.32 everything work will
Assuming you have Manage Jenkins > Configure Global Security > Enable Security and Jenkins Own User Database checked you would go to:
New Excel versions
=IF(ISNA(VLOOKUP(A1,B,B,1,FALSE)),"",A1)
Older Excel versions
=IF(ISNA(VLOOKUP(A1;B:B;1;FALSE));"";A1)
That is: "If the value of A1 exists in the B column, display it here. If it doesn't exist, leave it empty."
If you go to the Flat file connection manager under Advanced and Look at the "OutputColumnWidth" description's ToolTip It will tell you that Composit characters may use more spaces. So the "é" in "Société" most likely occupies more than one character.
EDIT: Here's something about it: http://en.wikipedia.org/wiki/Precomposed_character
It's better if you check visibility like this:
if($('#video-over').is(':visible'))
with open(filename, "rb") as f:#Needs to be in binary mode for the seek from the end to work
first = f.readline()
if f.read(1) == '':
return first
f.seek(-2, 2) # Jump to the second last byte.
while f.read(1) != b"\n": # Until EOL is found...
f.seek(-2, 1) # ...jump back the read byte plus one more.
last = f.readline() # Read last line.
return last
The above answer is a modified version of the above answers which handles the case that there is only one line in the file
Use Enum
's static method, GetNames
. It returns a string[]
, like so:
Enum.GetNames(typeof(DataSourceTypes))
If you want to create a method that does only this for only one type of enum
, and also converts that array to a List
, you can write something like this:
public List<string> GetDataSourceTypes()
{
return Enum.GetNames(typeof(DataSourceTypes)).ToList();
}
You will need Using System.Linq;
at the top of your class to use .ToList()
async public static Task<JObject> XMLtoNETAsync(XmlDocument ToConvert)
{
//Van XML naar JSON
string jsonText = await Task.Run(() => JsonConvert.SerializeXmlNode(ToConvert));
//Van JSON naar .net object
var o = await Task.Run(() => JObject.Parse(jsonText));
return o;
}
$("#datetimepicker4").datepicker({
dateFormat: 'mm/dd/yy',
changeMonth: true,
changeYear: true,
showOtherMonths: true,
selectOtherMonths: true,
pickTime: false,
format: 'YYYY-MM-DD'
});
You'll have to use the MySQLi extension if you don't want to execute a query twice:
if (mysqli_multi_query($link, $query))
{
$result1 = mysqli_store_result($link);
$result2 = null;
if (mysqli_more_results($link))
{
mysqli_next_result($link);
$result2 = mysqli_store_result($link);
}
// do something with both result sets.
if ($result1)
mysqli_free_result($result1);
if ($result2)
mysqli_free_result($result2);
}
You can use !=
operator to check for inequality. Moreover in python 2
there was <>
operator which used to do the same thing but it has been deprecated in python 3
I am the auhor of node-runnr . It have a very simple approach to create job. Also its very easy and clear to declare time and interval. For example, to execute a job at every 10min 20sec,
Runnr.addIntervalJob('10:20', function(){...}, 'myjob')
To do a job at 10am and 3pm daily,
Runnr.addDailyJob(['10:0:0', '15:0:0'], function(){...}, 'myjob')
Its that simple. For further detail: https://github.com/Saquib764/node-runnr
You will sometimes miss previous data if you try to install new version.. Please use the following in your terminal and I guarantee that mySql will start running in no time..
sudo /Applications/XAMPP/xamppfiles/bin/mysql.server start
Remember, it will ask for your Machine password and not mysql password..
PHP has a built in function called json_decode(). Just pass the JSON string into this function and it will convert it to the PHP equivalent string, array or object.
In order to pass it as a string from Javascript, you can convert it to JSON using
JSON.stringify(object);
or a library such as Prototype
If you're more comfortable PCRE regex syntax, which
you have [g]vim compiled with perl feature, test using
:ver and inspect features; if +perl is there you're good to go)
try search/replace using
:perldo s///
Example. Swap src and alt attributes in img tag:
<p class="logo"><a href="/"><img src="/caminoglobal_en/includes/themes/camino/images/header_logo.png" alt=""></a></p>
:perldo s/(src=".*?")\s+(alt=".*?")/$2 $1/
<p class="logo"><a href="/"><img alt="" src="/caminoglobal_en/includes/themes/camino/images/header_logo.png"></a></p>
I found the following to be a working solution::
npm install aws-sdk
Once you've installed the aws-sdk , use the following code replacing values with your where needed.
var AWS = require('aws-sdk');
var fs = require('fs');
var s3 = new AWS.S3();
// Bucket names must be unique across all S3 users
var myBucket = 'njera';
var myKey = 'jpeg';
//for text file
//fs.readFile('demo.txt', function (err, data) {
//for Video file
//fs.readFile('demo.avi', function (err, data) {
//for image file
fs.readFile('demo.jpg', function (err, data) {
if (err) { throw err; }
params = {Bucket: myBucket, Key: myKey, Body: data };
s3.putObject(params, function(err, data) {
if (err) {
console.log(err)
} else {
console.log("Successfully uploaded data to myBucket/myKey");
}
});
});
I found the complete tutorial on the subject here in case you're looking for references ::
<?php
// create a "numeric" array
$animals = array('monitor', 'cpu', 'mouse', 'ram', 'wifi', 'usb', 'pendrive');
//Normarl display
print_r($animals);
echo "<br/><br/>";
//If splice the array
//array_splice($animals, 2, 2);
unset($animals[3]); // you can unset the particular value
print_r($animals);
?>
I like to write a small plugin to make things cleaner:
$.fn.setClass = function(classes) {
this.attr('class', classes);
return this;
};
That way you can simply do
$('button').setClass('btn btn-primary');
I have a list of guidelines at http://soaprobe.blogspot.co.uk/2012/10/soa-rest-service-naming-guideline.html which we have used in prod. Guidelines are always debatable... I think consistency is sometimes more important than getting things perfect (if there is such a thing).
<TextBlock Text="{Binding Date, StringFormat='{}{0:MM/dd/yyyy a\\t h:mm tt}'}" />
will return you
04/07/2011 at 1:28 PM (-04)
One neat engine I came across is Angel-Engine. Info from the project site:
Some users (including me) have succesfully (without any major problems) compiled it under linux.
However this answer is simple, infact very simple and yea many have mentioned it that simply put the id of image into the following link https://drive.google.com/uc?export=view&id={fileId}
But however easy that is, I made a script to run in the console. Feed in an array of complete sharable links from google drive and get them converted into the above link. Then they can be simply used as static addresses.
array = ['https://drive.google.com/open?id=0B8kNn6zsgGEtUE5FaGNtcEthNWc','https://drive.google.com/open?id=0B8kNn6zsgGEtM2traVppYkhsV2s','https://drive.google.com/open?id=0B8kNn6zsgGEtNHgzT2x0MThJUlE']_x000D_
_x000D_
function separateDriveImageId(arr) {_x000D_
for (n=0;n<arr.length;n++){_x000D_
_x000D_
str = arr[n]_x000D_
_x000D_
for(i=0;i<str.length;i++){_x000D_
if( str.charAt(i)== '=' ){_x000D_
var num = i+1;_x000D_
var extrctdStrng = str.substr(num)_x000D_
_x000D_
}_x000D_
}_x000D_
console.log('https://drive.google.com/uc?export=view&id='+extrctdStrng)_x000D_
window.open('https://drive.google.com/uc?export=view&id='+extrctdStrng,'_blank')_x000D_
}_x000D_
_x000D_
_x000D_
}_x000D_
separateDriveImageId(array)
_x000D_
vector<string> getseq(char * db_file)
And if you want to print it on main() you should do it in a loop.
int main() {
vector<string> str_vec = getseq(argv[1]);
for(vector<string>::iterator it = str_vec.begin(); it != str_vec.end(); it++) {
cout << *it << endl;
}
}
On Windows XP -
rundll32.exe syssetup,SetupOobeBnk
This will reset the 30 day timer for activation back to 30 days so you can enter in the key normally.
To let SQL handle quote escape and everything else do this
BULK INSERT Test_CSV
FROM 'C:\MyCSV.csv'
WITH (
FORMAT='CSV'
--FIRSTROW = 2, --uncomment this if your CSV contains header, so start parsing at line 2
);
In regards to other answers, here is valuable info as well:
I keep seeing this in all answers: ROWTERMINATOR = '\n'
The \n
means LF and it is Linux style EOL
In Windows the EOL is made of 2 chars CRLF so you need ROWTERMINATOR = '\r\n'
Create your file then return a reference to it with the correct header to trigger the Save As - edit the following as needed. Put your CSV data into $csvdata.
$fname = 'myCSV.csv';
$fp = fopen($fname,'wb');
fwrite($fp,$csvdata);
fclose($fp);
header('Content-type: application/csv');
header("Content-Disposition: inline; filename=".$fname);
readfile($fname);
How about something like
CREATE TABLE testRequest (
wardNo nchar(5),
BHTNo nchar(5),
testID nchar(5),
reqDateTime datetime,
PRIMARY KEY (wardNo, BHTNo, testID)
);
Have a look at this example
To display only running containers
docker ps
To show all containers (includes all states)
docker ps -a
To show the latest created container (includes all states)
docker ps -l
To show n last created containers (includes all states)
docker ps -n=-1
To display total file sizes
docker ps -s
In the new version of Docker, commands are updated, and some management commands are added:
docker container ls
List all the running containers.
docker container ls -a
1 additional caveat (besides the answer by kanaka/peter): if you use WSS, and the server certificate is not acceptable to the browser, you may not get any browser rendered dialog (like it happens for Web pages). This is because WebSockets is treated as a so-called "subresource", and certificate accept / security exception / whatever dialogs are not rendered for subresources.
You need no new functions nor new modules. You simply need to execute the module you're calling if you don't want to use namespace.
module.exports = function() {
this.sum = function(a,b) { return a+b };
this.multiply = function(a,b) { return a*b };
//etc
}
or in any other .js like myController.js :
instead of
var tools = require('tools.js')
which force us to use a namespace and call tools like tools.sum(1,2);
we can simply call
require('tools.js')();
and then
sum(1,2);
in my case I have a file with controllers ctrls.js
module.exports = function() {
this.Categories = require('categories.js');
}
and I can use Categories
in every context as public class after require('ctrls.js')()
if (($("#one").length > 0)){
alert('yes');
}
if (($("#two").length > 0)){
alert('yes');
}
if (($("#three").length > 0)){
alert('yes');
}
if (($("#four")).length == 0){
alert('no');
}
This is what you need :)
As You're getting values from textfield as jTextField3.getText();
.
As it is a textField
it will return you string format as its format says:
String getText()
Returns the text contained in this TextComponent.
So, convert your String
to Integer
as:
int jml = Integer.parseInt(jTextField3.getText());
instead of directly setting
int jml = jTextField3.getText();
use the xclip
which is command line interface to X selections
apt-get install xclip
echo "test xclip " > /tmp/test.xclip
xclip -i < /tmp/test.xclip
xclip -o > /tmp/test.xclip.out
cat /tmp/test.xclip.out # "test xclip"
enjoy.
if you use tab for autocomplete
php artisan migrate --path='./database/migrations/2019_12_31_115457_create_coworking_personal_memberships_table.php'
You should use the OO interface to matplotlib, rather than the state machine interface. Almost all of the plt.*
function are thin wrappers that basically do gca().*
.
plt.subplot
returns an axes
object. Once you have a reference to the axes object you can plot directly to it, change its limits, etc.
import matplotlib.pyplot as plt
ax1 = plt.subplot(131)
ax1.scatter([1, 2], [3, 4])
ax1.set_xlim([0, 5])
ax1.set_ylim([0, 5])
ax2 = plt.subplot(132)
ax2.scatter([1, 2],[3, 4])
ax2.set_xlim([0, 5])
ax2.set_ylim([0, 5])
and so on for as many axes as you want.
or better, wrap it all up in a loop:
import matplotlib.pyplot as plt
DATA_x = ([1, 2],
[2, 3],
[3, 4])
DATA_y = DATA_x[::-1]
XLIMS = [[0, 10]] * 3
YLIMS = [[0, 10]] * 3
for j, (x, y, xlim, ylim) in enumerate(zip(DATA_x, DATA_y, XLIMS, YLIMS)):
ax = plt.subplot(1, 3, j + 1)
ax.scatter(x, y)
ax.set_xlim(xlim)
ax.set_ylim(ylim)
For me.
Edit .gitattributes file.
add
*.dll binary
Then everything goes well.
Javascript is duck typed, so you can create a small structure.
function myFunction(value1,value2,value3)
{
var myObject = new Object();
myObject.value2 = somevalue2;
myObject.value3 = somevalue3;
return myObject;
}
var value = myFunction("1",value2,value3);
if(value.value2 && value.value3)
{
//Do some stuff
}
Since the static method 'GetAccessControl' seems to be missing from the present version of .Net core/Standard I had to modify @Bryce Wagner's answer (I went ahead and used more modern syntax):
public static class PermissionHelper
{
public static bool? CurrentUserHasWritePermission(string filePath)
=> new WindowsPrincipal(WindowsIdentity.GetCurrent())
.SelectWritePermissions(filePath)
.FirstOrDefault();
private static IEnumerable<bool?> SelectWritePermissions(this WindowsPrincipal user, string filePath)
=> from rule in filePath
.GetFileSystemSecurity()
.GetAccessRules(true, true, typeof(NTAccount))
.Cast<FileSystemAccessRule>()
let right = user.HasRightSafe(rule)
where right.HasValue
// Deny takes precedence over allow
orderby right.Value == false descending
select right;
private static bool? HasRightSafe(this WindowsPrincipal user, FileSystemAccessRule rule)
{
try
{
return user.HasRight(rule);
}
catch
{
return null;
}
}
private static bool? HasRight(this WindowsPrincipal user,FileSystemAccessRule rule )
=> rule switch
{
{ FileSystemRights: FileSystemRights fileSystemRights } when (fileSystemRights &
(FileSystemRights.WriteData | FileSystemRights.Write)) == 0 => null,
{ IdentityReference: { Value: string value } } when value.StartsWith("S-1-") &&
!user.IsInRole(new SecurityIdentifier(rule.IdentityReference.Value)) => null,
{ IdentityReference: { Value: string value } } when value.StartsWith("S-1-") == false &&
!user.IsInRole(rule.IdentityReference.Value) => null,
{ AccessControlType: AccessControlType.Deny } => false,
{ AccessControlType: AccessControlType.Allow } => true,
_ => null
};
private static FileSystemSecurity GetFileSystemSecurity(this string filePath)
=> new FileInfo(filePath) switch
{
{ Exists: true } fileInfo => fileInfo.GetAccessControl(),
{ Exists: false } fileInfo => (FileSystemSecurity)fileInfo.Directory.GetAccessControl(),
_ => throw new Exception($"Check the file path, {filePath}: something's wrong with it.")
};
}
#pragma mark
directives show up in Xcode in the menus for direct access to methods. They have no impact on the program at all.
For example, using it with Xcode 4 will make those items appear directly in the Jump Bar.
There is a special pragma mark -
which creates a line.
CodePro was recently released by Google with the Eclipse project. It is free and highly effective. The plugin has a 'Find Dead Code' feature with one/many entry point(s). Works pretty well.
.icon {
width: 48px;
height: 48px;
display: inline-block;
background: url(https://s3-us-west-2.amazonaws.com/s.cdpn.io/18515/heart.svg) no-repeat 50% 50%;
background-size: cover;
}
.icon-orange {
-webkit-filter: hue-rotate(40deg) saturate(0.5) brightness(390%) saturate(4);
filter: hue-rotate(40deg) saturate(0.5) brightness(390%) saturate(4);
}
.icon-yellow {
-webkit-filter: hue-rotate(70deg) saturate(100);
filter: hue-rotate(70deg) saturate(100);
}
Your scanf("%s", s);
is commented out. That means s is uninitialized, so when this line ln = strlen(s);
executes, you get a seg fault.
It always helps to initialize a pointer to NULL, and then test for null before using the pointer.
I got this problem with Mac OS Lion, after transfer OS/Data from an older machine to a new one.
Solved deleting the old eclipse folder (which I have in Applications folder) and copy eclipse folder again (same version, same unpacked zip file, no changes).
std::string trimmed(std::string str ) {
if(str.length() == 0 ) { return "" ; }
else if ( str == std::string(" ") ) { return "" ; }
else {
while(str.at(0) == ' ') { str.erase(0, 1);}
while(str.at(str.length()-1) == ' ') { str.pop_back() ; }
return str ;
}
}
You certainly are able to have multiple CTEs in a single query expression. You just need to separate them with a comma. Here is an example. In the example below, there are two CTEs. One is named CategoryAndNumberOfProducts
and the second is named ProductsOverTenDollars
.
WITH CategoryAndNumberOfProducts (CategoryID, CategoryName, NumberOfProducts) AS
(
SELECT
CategoryID,
CategoryName,
(SELECT COUNT(1) FROM Products p
WHERE p.CategoryID = c.CategoryID) as NumberOfProducts
FROM Categories c
),
ProductsOverTenDollars (ProductID, CategoryID, ProductName, UnitPrice) AS
(
SELECT
ProductID,
CategoryID,
ProductName,
UnitPrice
FROM Products p
WHERE UnitPrice > 10.0
)
SELECT c.CategoryName, c.NumberOfProducts,
p.ProductName, p.UnitPrice
FROM ProductsOverTenDollars p
INNER JOIN CategoryAndNumberOfProducts c ON
p.CategoryID = c.CategoryID
ORDER BY ProductName
Here is a way that removes the lines containing "YOURTEXT" completely:
.*YOURTEXT.*[\r]?[\n]
(replace YOURTEXT with your text)The given regular expression matches both Windows and Unix end of lines.
If your text contains characters that have a special meaning for regular expression, like the backslash, you will need to escape them.
If the above solution does not work for you it is may be possible to obtain the same result with the following pure nodejs code. The above did not work for me and resulted in a compilation exception when running 'npm install iconv' on OSX:
npm install iconv
npm WARN package.json [email protected] No README.md file found!
npm http GET https://registry.npmjs.org/iconv
npm http 200 https://registry.npmjs.org/iconv
npm http GET https://registry.npmjs.org/iconv/-/iconv-2.0.4.tgz
npm http 200 https://registry.npmjs.org/iconv/-/iconv-2.0.4.tgz
> [email protected] install /Users/markboyd/git/portal/app/node_modules/iconv
> node-gyp rebuild
gyp http GET http://nodejs.org/dist/v0.10.1/node-v0.10.1.tar.gz
gyp http 200 http://nodejs.org/dist/v0.10.1/node-v0.10.1.tar.gz
xcode-select: Error: No Xcode is selected. Use xcode-select -switch <path-to-xcode>, or see the xcode-select manpage (man xcode-select) for further information.
fs.readFileSync() returns a Buffer if no encoding is specified. And Buffer has a toString() method that will convert to UTF8 if no encoding is specified giving you the file's contents. See the nodejs documentation. This worked for me.
First check for an error (N/A value) and then try the comparisation against cvErr(). You are comparing two different things, a value and an error. This may work, but not always. Simply casting the expression to an error may result in similar problems because it is not a real error only the value of an error which depends on the expression.
If IsError(ActiveWorkbook.Sheets("Publish").Range("G4").offset(offsetCount, 0).Value) Then
If (ActiveWorkbook.Sheets("Publish").Range("G4").offset(offsetCount, 0).Value <> CVErr(xlErrNA)) Then
'do something
End If
End If
Slightly shorter version, without unnecessary second variable:
$csv = <<<'ENDLIST'
"12345","Computers","Acer","4","Varta","5.93","1","0.04","27-05-2013"
"12346","Computers","Acer","5","Decra","5.94","1","0.04","27-05-2013"
ENDLIST;
$arr = explode("\n", $csv);
foreach ($arr as &$line) {
$line = str_getcsv($line);
}
Tested on MYSQL Database
Solution 1:
SET FOREIGN_KEY_CHECKS = 0;
TRUNCATE table1;
Solution 2:
DELETE FROM table1;
ALTER TABLE table1 AUTO_INCREMENT = 1;
TRUNCATE table1;
This works for me. I hope, this will help you also. Thanks for asking this question.
onclick
may not be the best event to attach that action to. Anytime anyone clicks anywhere in the form, it will open the window.
<form action="..." ...
onsubmit="window.open('google.html', '_blank', 'scrollbars=no,menubar=no,height=600,width=800,resizable=yes,toolbar=no,status=no');return true;">
You could search for:
<li><a href="#">[^\n]+
And replace with:
$0</a>
Where $0
is the whole match. The exact semantics will depend on the language are you using though.
WARNING: You should avoid parsing HTML with regex. Here's why.
According to the spec:
The Content-Length entity-header field indicates the size of the entity-body, in decimal number of OCTETs, sent to the recipient or, in the case of the HEAD method, the size of the entity-body that would have been sent had the request been a GET.
Content-Length = "Content-Length" ":" 1*DIGIT
An example is
Content-Length: 3495
Applications SHOULD use this field to indicate the transfer-length of the message-body, unless this is prohibited by the rules in section 4.4.
Any Content-Length greater than or equal to zero is a valid value. Section 4.4 describes how to determine the length of a message-body if a Content-Length is not given.
Note that the meaning of this field is significantly different from the corresponding definition in MIME, where it is an optional field used within the "message/external-body" content-type. In HTTP, it SHOULD be sent whenever the message's length can be determined prior to being transferred, unless this is prohibited by the rules in section 4.4.
In python the with
keyword is used when working with unmanaged resources (like file streams). It is similar to the using
statement in VB.NET and C#. It allows you to ensure that a resource is "cleaned up" when the code that uses it finishes running, even if exceptions are thrown. It provides 'syntactic sugar' for try/finally
blocks.
From Python Docs:
The
with
statement clarifies code that previously would usetry...finally
blocks to ensure that clean-up code is executed. In this section, I’ll discuss the statement as it will commonly be used. In the next section, I’ll examine the implementation details and show how to write objects for use with this statement.The
with
statement is a control-flow structure whose basic structure is:with expression [as variable]: with-block
The expression is evaluated, and it should result in an object that supports the context management protocol (that is, has
__enter__()
and__exit__()
methods).
Update fixed VB callout per Scott Wisniewski's comment. I was indeed confusing with
with using
.
I checked your XAML, it works fine - e.g. both labels have a gray foreground.
My guess is that you have some style which is affecting the way it looks...
Try moving your XAML to a brand-new window and see for yourself... Then, check if you have any themes or styles (in the Window.Resources
for instance) which might be affecting the labels...
Here is a quick example:
public class One {
/**
* @param args
*/
public static void main(String[] args) {
double a = 4.56777;
System.out.println( new Float( Math.round(a)) );
}
}
the result and output will be: 5.0
the closest upper bound Float to the starting value of double a = 4.56777
in this case the use of round is recommended since it takes in double
values and provides whole long
values
Regards
A color value has more than one dimension, so there is no intrinsic way to compare two colors. You have to determine for your use case the meaning of the colors and thereby how to best compare them.
Most likely you want to compare the hue, saturation and/or lightness properties of the colors as oppposed to the red/green/blue components. If you are having trouble figuring out how you want to compare them, take some pairs of sample colors and compare them mentally, then try to justify/explain to yourself why they are similar/different.
Once you know which properties/components of the colors you want to compare, then you need to figure out how to extract that information from a color.
Most likely you will just need to convert the color from the common RedGreenBlue representation to HueSaturationLightness, and then calculate something like
avghue = (color1.hue + color2.hue)/2
distance = abs(color1.hue-avghue)
This example would give you a simple scalar value indicating how far the gradient/hue of the colors are from each other.
In my case I was using different port. Default is 5432. I was using 5433. This worked for me:
$ psql -f update_table.sql -d db_name -U db_user_name -h 127.0.0.1 -p 5433
Math.sqrt(Math.abs(variable))
Couldn't be more simple can it ?
I've read all the comments. It's interesting to notice what happens when you print out this:
printf("\nInteger = %d\n", EOF); //OUTPUT = -1
printf("Decimal = %d\n", EOF); //OUTPUT = -1
printf("Octal = %o\n", EOF); //OUTPUT = 37777777777
printf("Hexadecimal = %x\n", EOF); //OUTPUT = ffffffff
printf("Double and float = %f\n", EOF); //OUTPUT = 0.000000
printf("Long double = %Lf\n", EOF); //OUTPUT = 0.000000
printf("Character = %c\n", EOF); //OUTPUT = nothing
As we can see here, EOF is NOT a character (whatsoever).
My solution was to remove the Eclipse ADT plugin via menu "Help > About Eclipse SDK > Installation Details". Eclipse will restart.
Next go to Menu "Help > Install New Software", then add the ADT plugin url "https://dl-ssl.google.com/android/eclipse" (or select the existing link from the dropdown).
This will re-install the latest ADT, including the DDMS files.
Basic Solution for Laravel 8 is
use Illuminate\Support\Facades\Http;
$response = Http::get('http://example.com');
I had conflict between "GuzzleHTTP sending requests" and "Illuminate\Http\Request;" don't ask me why... [it's here to be searchable]
So looking for 1sec i found in Laravel 8 Doc...
https://laravel.com/docs/8.x/http-client#making-requests
as you can see
https://laravel.com/docs/8.x/http-client#introduction
Laravel provides an expressive, minimal API around the Guzzle HTTP client, allowing you to quickly make outgoing HTTP requests to communicate with other web applications. Laravel's wrapper around Guzzle is focused on its most common use cases and a wonderful developer experience.
It worked for me very well, have fun and if helpful point up!
Installing version 1.1.8 of enum34 worked for me.
I was able to fix this by adding enum34 = "==1.1.8" to pyproject.toml. Apparently enum34 had a feature in v1.1.8 that avoided this error, but this regressed in v1.1.9+. This is just a workaround though. The better solution would be for packages to use environment markers so you don't have to install enum34 at all unless needed.
SPAN class code. Stylesheet:
<link rel="stylesheet" type="text/css" href="http://cdn.webrupee.com/font">
Now use the below mentioned code to type Indian Rupee symbol,
<span class="WebRupee">Rs.</span>
Once the popular font families will be updated to Unicode 6.0.0, then you will be able to type Indian Rupee Symbol by typing ₹ in HTML editor.
You could also use the apache library and do this:
StringUtils.split(test, "|");
If you are using iTerm this command will open a new tab:
osascript -e 'tell application "iTerm" to activate' -e 'tell application "System Events" to tell process "iTerm" to keystroke "t" using command down'
urllib
is a standard library, you do not have to install it. Simply import urllib
I think it's easy way... but I don't know how I can pass the result variable directly then I create a local char array as temp and return it.
char* substr(char *buff, uint8_t start,uint8_t len, char* substr)
{
strncpy(substr, buff+start, len);
substr[len] = 0;
return substr;
}
use maven dependency
<dependency>
<groupId>org.apache.commons</groupId>
<artifactId>commons-io</artifactId>
<version>1.3.2</version>
</dependency>
or download commons-io.1.3.2.jar to your lib folder
That error means that the compiler is not able to find the definition of the type of your struct before the declaration of the array of structs, since you're saying you have the definition of the struct in a header file and the error is in nbody.c
then you should check if you're including correctly the header file.
Check your #include
's and make sure the definition of the struct is done before declaring any variable of that type.
If you want to run a script without modifying the default script execution policy, you can use the bypass switch when launching Windows PowerShell.
powershell [-noexit] -executionpolicy bypass -File <Filename>
The first day of the previous month is always 1, to get the last day of the previous month, use 0 with DateSerial:
''Today is 20/03/2013 in dd/mm/yyyy
DateSerial(Year(Date),Month(Date),0) = 28/02/2013
DateSerial(Year(Date),1,0) = 31/12/2012
You can get the first day from the above like so:
LastDay = DateSerial(Year(Date),Month(Date),0)
FirstDay = LastDay-Day(LastDay)+1
See also: How to caculate last business day of month in VBScript
As Per documentation of moment js,
There is Precise Range plugin, written by Rob Dawson, can be used to display exact, human-readable representations of date/time ranges, url :http://codebox.org.uk/pages/moment-date-range-plugin
moment("2014-01-01 12:00:00").preciseDiff("2015-03-04 16:05:06");
// 1 year 2 months 3 days 4 hours 5 minutes 6 seconds
moment.preciseDiff("2014-01-01 12:00:00", "2014-04-20 12:00:00");
// 3 months 19 days
You need to set the password for root@localhost
to be blank. There are two ways:
The MySQL SET PASSWORD
command:
SET PASSWORD FOR root@localhost=PASSWORD('');
Using the command-line mysqladmin
tool:
mysqladmin -u root -pType_in_your_current_password_here password ''
There is an issue that if you close the dialog it will execute the onCloseCallback function. This is a better design.
function jAlert2(outputMsg, titleMsg, onCloseCallback) {
if (!titleMsg)
titleMsg = 'Alert';
if (!outputMsg)
outputMsg = 'No Message to Display.';
$("<div></div>").html(outputMsg).dialog({
title: titleMsg,
resizable: false,
modal: true,
buttons: {
"OK": onCloseCallback,
"Cancel": function() {
$( this ).dialog( "destroy" );
}
},
});
To my knowledge, there is sadly no CSS filter to colorise an element (perhaps with the use of some SVG filter magic, but I'm somewhat unfamiliar with that) and even if that wasn't the case, filters are basically only supported by webkit browsers.
With that said, you could still work around this and use a canvas
to modify your image. Basically, you can draw an image element onto a canvas and then loop through the pixels, modifying the respective RGBA values to the colour you want.
However, canvases do come with some restrictions. Most importantly, you have to make sure that the image src comes from the same domain as the page. Otherwise the browser won't allow you to read or modify the pixel data of the canvas.
Here's a JSFiddle changing the colour of the JSFiddle logo.
//Base64 source, but any local source will work_x000D_
var src = "data:image/png;base64,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";_x000D_
var canvas = document.getElementById("theCanvas");_x000D_
var ctx = canvas.getContext("2d");_x000D_
var img = new Image;_x000D_
_x000D_
//wait for the image to load_x000D_
img.onload = function() {_x000D_
//Draw the original image so that you can fetch the colour data_x000D_
ctx.drawImage(img,0,0);_x000D_
var imgData = ctx.getImageData(0, 0, canvas.width, canvas.height);_x000D_
_x000D_
/*_x000D_
imgData.data is a one-dimensional array which contains _x000D_
the respective RGBA values for every pixel _x000D_
in the selected region of the context _x000D_
(note i+=4 in the loop)_x000D_
*/_x000D_
_x000D_
for (var i = 0; i < imgData.data.length; i+=4) {_x000D_
imgData.data[i] = 255; //Red, 0-255_x000D_
imgData.data[i+1] = 255; //Green, 0-255_x000D_
imgData.data[i+2] = 255; //Blue, 0-255_x000D_
/* _x000D_
imgData.data[i+3] contains the alpha value_x000D_
which we are going to ignore and leave_x000D_
alone with its original value_x000D_
*/_x000D_
}_x000D_
ctx.clearRect(0, 0, canvas.width, canvas.height); //clear the original image_x000D_
ctx.putImageData(imgData, 0, 0); //paint the new colorised image_x000D_
}_x000D_
_x000D_
//Load the image!_x000D_
img.src = src;
_x000D_
body {_x000D_
background: green;_x000D_
}
_x000D_
<canvas id="theCanvas"></canvas>
_x000D_
As of Laravel 5.6, if you have this kind of structure and you want to include another blade file inside a subfolder,
|--- views
|------- parentFolder (Folder)
|---------- name.blade.php (Blade File)
|---------- childFolder (Folder)
|-------------- mypage.blade.php (Blade File)
name.blade.php
<html>
@include('parentFolder.childFolder.mypage')
</html>
For anyone having the problem of the API being called more than once while downloading a fairly large file using the method in the accepted answer, please set response buffering to true System.Web.HttpContext.Current.Response.Buffer = true;
This makes sure that the entire binary content is buffered on the server side before it is sent to the client. Otherwise you will see multiple request being sent to the controller and if you do not handle it properly, the file will become corrupt.
Optional.stream
has been added to JDK 9. This enables you to do the following, without the need of any helper method:
Optional<Other> result =
things.stream()
.map(this::resolve)
.flatMap(Optional::stream)
.findFirst();
Yes, this was a small hole in the API, in that it's somewhat inconvenient to turn an Optional<T>
into a zero-or-one length Stream<T>
. You could do this:
Optional<Other> result =
things.stream()
.map(this::resolve)
.flatMap(o -> o.isPresent() ? Stream.of(o.get()) : Stream.empty())
.findFirst();
Having the ternary operator inside the flatMap
is a bit cumbersome, though, so it might be better to write a little helper function to do this:
/**
* Turns an Optional<T> into a Stream<T> of length zero or one depending upon
* whether a value is present.
*/
static <T> Stream<T> streamopt(Optional<T> opt) {
if (opt.isPresent())
return Stream.of(opt.get());
else
return Stream.empty();
}
Optional<Other> result =
things.stream()
.flatMap(t -> streamopt(resolve(t)))
.findFirst();
Here, I've inlined the call to resolve()
instead of having a separate map()
operation, but this is a matter of taste.
Also worth noting window.scrollBy(dx,dy)
(ref)
A workaround of mine is to manipulate a model variable just for the ng-class toggling:
For example, I want to toggle class according to the state of my list:
1) Whenever my list is empty, I update my model:
$scope.extract = function(removeItemId) {
$scope.list= jQuery.grep($scope.list, function(item){return item.id != removeItemId});
if (!$scope.list.length) {
$scope.liststate = "empty";
}
}
2) Whenever my list is not empty, I set another state
$scope.extract = function(item) {
$scope.list.push(item);
$scope.liststate = "notempty";
}
3) When my list is not ever touched, I want to give another class (this is where the page is initiated):
$scope.liststate = "init";
3) I use this additional model on my ng-class:
ng-class="{'bg-empty': liststate == 'empty', 'bg-notempty': liststate == 'notempty', 'bg-init': liststate = 'init'}"
Check this also:
This problem occurs because the Web site does not have the Directory Browsing feature enabled, and the default document is not configured. To resolve this problem, use one of the following methods:
You can also try this:
var data= _.reverse(_.sortBy(res.locals.subscriptionList.items, ['type', 'name']));
For those only have one child in the container, you can use the table-cell
and vertical-align
approach which worked reliably for positioning a single div at the bottom of its parent.
Note that using table-footer-group
as other answers mentioned will break the height calculation of parent table
.
#container {_x000D_
display: table;_x000D_
width: 100%;_x000D_
height: 200px;_x000D_
}_x000D_
#item {_x000D_
display: table-cell;_x000D_
vertical-align: bottom;_x000D_
}
_x000D_
<div id="container">_x000D_
<div id="item">Single bottom item</div>_x000D_
</div>
_x000D_
If it's inside a closure, i'm pretty sure you can't.
Otherwise you just do functionName();
and hit return.
There's a few useful functions for dealing with errno
s. (Just to make it clear, these are built-in to libc
-- I'm just providing sample implementations because some people find reading code clearer than reading English.)
#include <string.h>
char *strerror(int errnum);
/* you can think of it as being implemented like this: */
static char strerror_buf[1024];
const char *sys_errlist[] = {
[EPERM] = "Operation not permitted",
[ENOENT] = "No such file or directory",
[ESRCH] = "No such process",
[EINTR] = "Interrupted system call",
[EIO] = "I/O error",
[ENXIO] = "No such device or address",
[E2BIG] = "Argument list too long",
/* etc. */
};
int sys_nerr = sizeof(sys_errlist) / sizeof(char *);
char *strerror(int errnum) {
if (0 <= errnum && errnum < sys_nerr && sys_errlist[errnum])
strcpy(strerror_buf, sys_errlist[errnum]);
else
sprintf(strerror_buf, "Unknown error %d", errnum);
return strerror_buf;
}
strerror
returns a string describing the error number you've passed to it. Caution, this is not thread- or interrupt-safe; it is free to rewrite the string and return the same pointer on the next invocation. Use strerror_r
if you need to worry about that.
#include <stdio.h>
void perror(const char *s);
/* you can think of it as being implemented like this: */
void perror(const char *s) {
fprintf(stderr, "%s: %s\n", s, strerror(errno));
}
perror
prints out the message you give it, plus a string describing the current errno
, to standard error.
If you're using latest spring boot (with jdbc starter and Hikari) you'll run into:
java.lang.IllegalArgumentException: jdbcUrl is required with driverClassName.
To solve this:
datasource.oracle.url=youroracleurl
@Primary
is mandatory!):@Bean
@Primary
@ConfigurationProperties("datasource.oracle")
public DataSourceProperties getDatasourceProperties() {
return new DataSourceProperties();
}
@Bean
@ConfigurationProperties("datasource.oracle")
public DataSource getDatasource() {
return getDatasourceProperties().initializeDataSourceBuilder()
.username("username")
.password("password")
.build();
}
Here is the question: Is it possible that I can set the default value without using attribute 'value'?
Nope: value
is the only way to set the default attribute.
Why don't you want to use it?
First you should read an explanation on the output of free
. Bottom line: you have at least 10.7 GB of memory readily usable by processes.
Then you should define what "memory usage" is for a process (it's not easy or unambiguous, trust me).
Then we might be able to help more :-)
I would prefere
if (!myStr.empty())
{
//do something
}
Also you don't have to write std::string a = "";
. You can just write std::string a;
- it will be empty by default
If you are in the fragment itself, you need to call this. Your fragment needs to be the fragment that is being called. Enter code:
getFragmentManager().beginTransaction().remove(yourFragment).commitAllowingStateLoss();
or if you are using supportLib
, then you need to call:
getSupportFragmentManager().beginTransaction().remove(yourFragment).commitAllowingStateLoss();
From Firefox 34 onwards you now have an option for Storage Inspector, which you can enable it from developer tools settings
Once there, you can enable the Storage
options under Default Firefox Developer tools
Updated 27-3-16
Firefox 48.0a1 now supports Cookies editing.
Updated 3-4-16
Firefox 48.0a1 now supports localStorage and sessionStorage editing.
Updated 02-08-16
Firefox 48 (stable release) and onward supports editing of all storage types, except IndexedDB
Assigning questionFrame.frame.size.height= screenSize.height * 0.30
will not reflect anything in the view. because it is a get-only property. If you want to change the frame of questionFrame you can use the below code.
questionFrame.frame = CGRect(x: 0, y: 0, width: 0, height: screenSize.height * 0.70)
I am looking for the same problem and here is what help me. Here is the jQuery version 3.1.0 and the load event is deprecated for use since jQuery version 1.8. The load event is removed from jQuery 3.0. Instead, you can use on method and bind the JavaScript load event:
$(window).on('load', function () {
alert("Window Loaded");
});
Ask first yourself: Is your file an internal component of your application? (That usually implies that it's packed inside your JAR, or WAR if it is a web-app; typically, it's some configuration file or static resource, read-only).
If the answer is yes, you don't want to specify an absolute path for the file. But you neither want to access it with a relative path (as your example), because Java assumes that path is relative to the "current directory". Usually the preferred way for this scenario is to load it relatively from the classpath.
Java provides you the classLoader.getResource() method for doing this. And Eclipse (in the normal setup) assumes src/
is to be in the root of your classpath, so that, after compiling, it copies everything to your output directory ( bin/
), the java files in compiled form ( .class
), the rest as is.
So, for example, if you place your file in src/Files/myfile.txt
, it will be copied at compile time to bin/Files/myfile.txt
; and, at runtime, bin/
will be in (the root of) your classpath. So, by calling getResource("/Files/myfile.txt")
(in some of its variants) you will be able to read it.
Edited: Further, if your file is conceptually tied to a java class (eg, some com.example.MyClass
has a MyClass.cfg
associated configuration file), you can use the getResource() method from the class and use a (resource) relative path: MyClass.getResource("MyClass.cfg")
. The file then will be searched in the classpath, but with the class package pre-appended. So that, in this scenario, you'll typically place your MyClass.cfg
and MyClass.java
files in the same directory.
Alternate form of the answer by @rumpel
with open(filename, 'w'): pass
From the Java EE documentation:
public abstract boolean unique
(Optional) Whether the property is a unique key. This is a shortcut for the UniqueConstraint annotation at the table level and is useful for when the unique key constraint is only a single field. This constraint applies in addition to any constraint entailed by primary key mapping and to constraints specified at the table level.
See doc
Can you show code which you use for setting date object? Anyway< you can use this code for intialisation of date:
new SimpleDateFormat("yyyy-MM-dd hh:mm:ss").parse("2011-01-01 00:00:00")
Update 2018...
card
has replaced the well
.
Bootstrap 4
<div class="card card-body bg-light">
Well
</div>
or, as two DIVs...
<div class="card bg-light">
<div class="card-body">
...
</div>
</div>
(Note: in Bootstrap 4 Alpha, these were known as card-block
instead of card-body
and bg-faded
instead of bg-light
)
You can label each line separately, in your case:
\begin{align}
\lambda_i + \mu_i = 0 \label{eq:1}\\
\mu_i \xi_i = 0 \label{eq:2}\\
\lambda_i [y_i( w^T x_i + b) - 1 + \xi_i] = 0 \label{eq:3}
\end{align}
Note that this only works for AMS environments that are designed for multiple equations (as opposed to multiline single equations).
First change the following parameters:
Tools -> Options -> Debugging -> Symbols -> Server -> Yes
Then press Ctrl+F5 and you will see amazing things.
If the content has more than 1 line, adding a bottom border won't help. In that case you'll have to use,
text-decoration: underline;
text-decoration-style: dotted;
If you want more breathing space in between the text and the line, simply use,
text-underline-position: under;
There is an command line application called "ShowVer" at CodeProject:
ShowVer.exe command-line VERSIONINFO display program
As usual the application comes with an exe and the source code (VisualC++ 6).
Out outputs all the meta data available:
On a German Win7 system the output for user32.dll is like this:
VERSIONINFO for file "C:\Windows\system32\user32.dll": (type:0)
Signature: feef04bd
StrucVersion: 1.0
FileVersion: 6.1.7601.17514
ProductVersion: 6.1.7601.17514
FileFlagsMask: 0x3f
FileFlags: 0
FileOS: VOS_NT_WINDOWS32
FileType: VFT_DLL
FileDate: 0.0
LangID: 040704B0
CompanyName : Microsoft Corporation
FileDescription : Multi-User Windows USER API Client DLL
FileVersion : 6.1.7601.17514 (win7sp1_rtm.101119-1850)
InternalName : user32
LegalCopyright : ® Microsoft Corporation. Alle Rechte vorbehalten.
OriginalFilename : user32
ProductName : Betriebssystem Microsoft« Windows«
ProductVersion : 6.1.7601.17514
Translation: 040704b0
Those are varargs
they are used to create a method that receive any number of arguments.
For instance PrintStream.printf method uses it, since you don't know how many would arguments you'll use.
They can only be used as final position of the arguments.
varargs
was was added on Java 1.5
For anyone still coming to this post, the other option is to simply omit the parentheses:
Sub SomeOtherSub(Stattyp As String)
'Daty and the other variables are defined here
CatSubProduktAreakum Stattyp, Daty + UBound(SubCategories) + 2
End Sub
The Call
keywords is only really in VBA for backwards compatibilty and isn't actually required.
If however, you decide to use the Call
keyword, then you have to change your syntax to suit.
'// With Call
Call Foo(Bar)
'// Without Call
Foo Bar
Both will do exactly the same thing.
That being said, there may be instances to watch out for where using parentheses unnecessarily will cause things to be evaluated where you didn't intend them to be (as parentheses do this in VBA) so with that in mind the better option is probably to omit the Call
keyword and the parentheses
My opinion is, Instead of storing images directly to the database, It is recommended to store the image location in the database. As we compare both options, Storing images in the database is safe for security purpose. Disadvantage are
If database is corrupted, no way to retrieve.
Retrieving image files from db is slow when compare to other option.
On the other hand, storing image file location in db will have following advantages.
It is easy to retrieve.
If more than one images are stored, we can easily retrieve image information.
Worth mentioning that there are many different solutions which offer two way binding and play really nicely.
I have had a pleasant experience with this model binder - https://github.com/theironcook/Backbone.ModelBinder. which gives sensible defaults yet a lot of custom jquery selector mapping of model attributes to input elements.
There is a more extended list of backbone extensions/plugins on github
SHA doesn't require anything but an input to be applied, while AES requires at least 3 things - what you're encrypting/decrypting, an encryption key, and the initialization vector.
After reviewing MySQL 5.7 changes, MySql stopped supporting zero values in date / datetime.
It's incorrect to use zeros in date or in datetime, just put null instead of zeros.
Missing a closing brace on a function definition will cause this error as I just discovered.
function whoIsAnIidiot() {
echo "you are for forgetting the closing brace just below this line !"
Which of course should be like this...
function whoIsAnIidiot() {
echo "not you for sure"
}
Easy way to fix this issue
Solution:
to install "microsoft.entityframeworkcore.sqlserver" with NuGet
PS: make sure you have using EF on the content "using Microsoft.EntityFrameworkCore;"
Maybe you should try it with -quality 100 -size "1024x1024", because resize often gives results that are ugly to view.
Not in the traditional sense, but you can use classes for this, if you have access to the HTML. Consider this:
<p class="normal">Text</p>
<p class="active">Text</p>
and in your CSS file:
p.normal {
background-position : 150px 8px;
}
p.active {
background-position : 4px 8px;
}
That's the CSS way to do it.
Then there are CSS preprocessors like Sass. You can use conditionals there, which'd look like this:
$type: monster;
p {
@if $type == ocean {
color: blue;
} @else if $type == matador {
color: red;
} @else if $type == monster {
color: green;
} @else {
color: black;
}
}
Disadvantages are, that you're bound to pre-process your stylesheets, and that the condition is evaluated at compile time, not run time.
A newer feature of CSS proper are custom properties (a.k.a. CSS variables). They are evaluated at run time (in browsers supporting them).
With them you could do something along the line:
:root {
--main-bg-color: brown;
}
.one {
background-color: var(--main-bg-color);
}
.two {
background-color: black;
}
Finally, you can preprocess your stylesheet with your favourite server-side language. If you're using PHP, serve a style.css.php
file, that looks something like this:
p {
background-position: <?php echo (@$_GET['foo'] == 'bar')? "150" : "4"; ?>px 8px;
}
In this case, you will however have a performance impact, since caching such a stylesheet will be difficult.
What you want to do is a combination of part of 1 and all of 2.
You need to use the PowerMockito.mockStatic to enable static mocking for all static methods of a class. This means make it possible to stub them using the when-thenReturn syntax.
But the 2-argument overload of mockStatic you are using supplies a default strategy for what Mockito/PowerMock should do when you call a method you haven't explicitly stubbed on the mock instance.
From the javadoc:
Creates class mock with a specified strategy for its answers to interactions. It's quite advanced feature and typically you don't need it to write decent tests. However it can be helpful when working with legacy systems. It is the default answer so it will be used only when you don't stub the method call.
The default default stubbing strategy is to just return null, 0 or false for object, number and boolean valued methods. By using the 2-arg overload, you're saying "No, no, no, by default use this Answer subclass' answer method to get a default value. It returns a Long, so if you have static methods which return something incompatible with Long, there is a problem.
Instead, use the 1-arg version of mockStatic to enable stubbing of static methods, then use when-thenReturn to specify what to do for a particular method. For example:
import static org.mockito.Mockito.*;
import org.junit.Test;
import org.junit.runner.RunWith;
import org.mockito.invocation.InvocationOnMock;
import org.mockito.stubbing.Answer;
import org.powermock.api.mockito.PowerMockito;
import org.powermock.core.classloader.annotations.PrepareForTest;
import org.powermock.modules.junit4.PowerMockRunner;
class ClassWithStatics {
public static String getString() {
return "String";
}
public static int getInt() {
return 1;
}
}
@RunWith(PowerMockRunner.class)
@PrepareForTest(ClassWithStatics.class)
public class StubJustOneStatic {
@Test
public void test() {
PowerMockito.mockStatic(ClassWithStatics.class);
when(ClassWithStatics.getString()).thenReturn("Hello!");
System.out.println("String: " + ClassWithStatics.getString());
System.out.println("Int: " + ClassWithStatics.getInt());
}
}
The String-valued static method is stubbed to return "Hello!", while the int-valued static method uses the default stubbing, returning 0.
\p{L}
matches a single code point in the category "letter".
\p{N}
matches any kind of numeric character in any script.
Source: regular-expressions.info
If you're going to work with regular expressions a lot, I'd suggest bookmarking that site, it's very useful.
I recommend you use a try/catch to prevent some possible issues:
OOP:
var preloadImage = function (url) {
try {
var _img = new Image();
_img.src = url;
} catch (e) { }
}
Standard:
function preloadImage (url) {
try {
var _img = new Image();
_img.src = url;
} catch (e) { }
}
Also, while I love DOM, old stupid browsers may have problems with you using DOM, so avoid it altogether IMHO contrary to freedev's contribution. Image() has better support in old trash browsers.
The JDK (JAVA_HOME) used to launch Eclipse is not necessarily the one used to compiled your project.
To see what JRE you can select for your project, check the preferences:
General ? Java Installed JRE
By default, if you have not added any JRE, the only one declared will be the one used to launched Eclipse (which can be defined in your eclipse.ini).
You can add any other JRE you want, including one compatible with your project.
After that, you will need to check in your project properties (or in the general preferences) what JRE is used, with what compliance level:
(source: standartux.fr)
Very simple just Find:
<option value value=.*?>
and Click Replace
Default capacity of ArrayList is 10. Once the Capacity reaches its maximum capacity, Size of the ArrayList will be 16, once the capacity reaches its maximum capacity of 16, size of the ArrayList will be 25 and keep on increasing based on Data size.....
How? Here is the Answer and Formula
New capacity = (Current Capacity * 3/2) + 1
So, if the default capacity is 10, then
Current Capacity = 10
New capacity = (10 * 3/2) + 1
Output is 16
Flatten make explicit how you serialize a multidimensional tensor (tipically the input one). This allows the mapping between the (flattened) input tensor and the first hidden layer. If the first hidden layer is "dense" each element of the (serialized) input tensor will be connected with each element of the hidden array. If you do not use Flatten, the way the input tensor is mapped onto the first hidden layer would be ambiguous.
If you have the Apache common utilities in your project rather use the first one. Because its shorter and does exactly the same as the latter one. There won't be any difference between both methods but how it looks inside the source code.
Also a empty check using
listName.size() != 0
Is discouraged because all collection implementations have the
listName.isEmpty()
function that does exactly the same.
So all in all, if you have the Apache common utils in your classpath anyway, use
if (CollectionUtils.isNotEmpty(listName))
in any other case use
if(listName != null && listName.isEmpty())
You will not notice any performance difference. Both lines do exactly the same.
Probably the easiest thing to do would be to give your scrip tag an id
attribute.
Set sh1 = Worksheets(filenum(lngPosition)).Activate
You are getting Subscript out of range error
error becuase it cannot find that Worksheet.
Also please... please... please do not use .Select/.Activate/Selection/ActiveCell
You might want to see How to Avoid using Select in Excel VBA Macros.
Converting from dict to list is made easy in Python. Three examples:
>> d = {'a': 'Arthur', 'b': 'Belling'}
>> d.items()
[('a', 'Arthur'), ('b', 'Belling')]
>> d.keys()
['a', 'b']
>> d.values()
['Arthur', 'Belling']
I have fixed this issue by unchecking 'Connect Hardware Keyboard'. Please refer to the image below to fix this issue
I had the following error message Port 80 in use by "Unable to open process" with PID 4! Apache WILL NOT start without the configured ports free! You need to uninstall/disable/reconfigure the blocking application or reconfigure Apache and the Control Panel to listen on a different port Starting Check-Timer Control Panel Ready
opened the httpd.conf and changed the listen port from 80 to 1234 in both places
Listen 1234
Then go to Config for the xampp control panel and go to service and port setting and changed the port from 80 to 1234
That worked.
A general purpose way is to coerce the collation to DATABASE_DEFAULT. This removes hardcoding the collation name which could change.
It's also useful for temp table and table variables, and where you may not know the server collation (eg you are a vendor placing your system on the customer's server)
select
sone_field collate DATABASE_DEFAULT
from
table_1
inner join
table_2 on table_1.field collate DATABASE_DEFAULT = table_2.field
where whatever
Look for "Windows x86", it's the 32 bit version.
webpack.config.js
{
test: /\.(png|jpe?g|gif)$/i,
loader: 'file-loader',
options: {
name: '[name].[ext]',
},
}
anyfile.html
<img src={image_name.jpg} />
First and foremost, you should consider calling MimeTypeMap#getMimeTypeFromExtension()
, like this:
// url = file path or whatever suitable URL you want.
public static String getMimeType(String url) {
String type = null;
String extension = MimeTypeMap.getFileExtensionFromUrl(url);
if (extension != null) {
type = MimeTypeMap.getSingleton().getMimeTypeFromExtension(extension);
}
return type;
}
Just modify your WebAPIConfig.cs as bellow
Routes.MapHttpRoute(
name: "DefaultApi",
routeTemplate: "api/{controller}/{action}/{id}",
defaults: new { action = "get", id = RouteParameter.Optional });
Then implement your API as bellow
// GET: api/Controller_Name/Show/1
[ActionName("Show")]
[HttpGet]
public EventPlanner Id(int id){}
the easist way is to call the method
- (void)touchesBegan:(NSSet *)touches withEvent:(UIEvent *)event
{
if(![txtfld resignFirstResponder])
{
[txtfld resignFirstResponder];
}
else
{
}
[super touchesBegan:touches withEvent:event];
}
Try jQuery.inArray()
Here is a jsfiddle link using the same code : http://jsfiddle.net/yrshaikh/SUKn2/
The $.inArray() method is similar to JavaScript's native .indexOf() method in that it returns -1 when it doesn't find a match. If the first element within the array matches value, $.inArray() returns 0
Example Code :
<html>
<head>
<style>
div { color:blue; }
span { color:red; }
</style>
<script src="http://code.jquery.com/jquery-latest.js"></script>
</head>
<body>
<div>"John" found at <span></span></div>
<div>4 found at <span></span></div>
<div>"Karl" not found, so <span></span></div>
<div>
"Pete" is in the array, but not at or after index 2, so <span></span>
</div>
<script>
var arr = [ 4, "Pete", 8, "John" ];
var $spans = $("span");
$spans.eq(0).text(jQuery.inArray("John", arr));
$spans.eq(1).text(jQuery.inArray(4, arr));
$spans.eq(2).text(jQuery.inArray("Karl", arr));
$spans.eq(3).text(jQuery.inArray("Pete", arr, 2));
</script>
</body>
</html>
Output:
"John" found at 3 4 found at 0 "Karl" not found, so -1 "Pete" is in the array, but not at or after index 2, so -1
Similar answer to Gunnar, with more complete example: You can even transparently return the whole thing:
function dumpArguments(...args) {
for (var i = 0; i < args.length; i++)
console.log(args[i]);
return args;
}
dumpArguments("foo", "bar", true, 42, ["yes", "no"], { 'banana': true });
Output:
foo
bar
true
42
["yes","no"]
{"banana":true}
$uri = $_SERVER['REQUEST_URI'];
This will give you the requested directory and file name. If you use mod_rewrite, this is extremely useful because it tells you what page the user was looking at.
If you need the actual file name, you might want to try either $_SERVER['PHP_SELF']
, the magic constant __FILE__
, or $_SERVER['SCRIPT_FILENAME']
. The latter 2 give you the complete path (from the root of the server), rather than just the root of your website. They are useful for includes and such.
$_SERVER['PHP_SELF']
gives you the file name relative to the root of the website.
$relative_path = $_SERVER['PHP_SELF'];
$complete_path = __FILE__;
$complete_path = $_SERVER['SCRIPT_FILENAME'];
For a completely stateless utility class in Java, I suggest the class be declared public
and final
, and have a private constructor to prevent instantiation. The final
keyword prevents sub-classing and can improve efficiency at runtime.
The class should contain all static
methods and should not be declared abstract
(as that would imply the class is not concrete and has to be implemented in some way).
The class should be given a name that corresponds to its set of provided utilities (or "Util" if the class is to provide a wide range of uncategorized utilities).
The class should not contain a nested class unless the nested class is to be a utility class as well (though this practice is potentially complex and hurts readability).
Methods in the class should have appropriate names.
Methods only used by the class itself should be private.
The class should not have any non-final/non-static class fields.
The class can also be statically imported by other classes to improve code readability (this depends on the complexity of the project however).
Example:
public final class ExampleUtilities {
// Example Utility method
public static int foo(int i, int j) {
int val;
//Do stuff
return val;
}
// Example Utility method overloaded
public static float foo(float i, float j) {
float val;
//Do stuff
return val;
}
// Example Utility method calling private method
public static long bar(int p) {
return hid(p) * hid(p);
}
// Example private method
private static long hid(int i) {
return i * 2 + 1;
}
}
Perhaps most importantly of all, the documentation for each method should be precise and descriptive. Chances are methods from this class will be used very often and its good to have high quality documentation to complement the code.
sunDoesNotRecommendUnderscoresBecauseJavaVariableAndFunctionNamesTendToBeLongEnoughAsItIs(); as_others_have_said_consistency_is_the_important_thing_here_so_chose_whatever_you_think_is_more_readable();
Resolution I found;
Head to the following directory
%userprofile%\documents\IISExpress\Config directory
Delete all files within that folder. Restart visual studio and works like a charm.