It tells taskkill that the next parameter something.exe is an image name, a.k.a executable name

C:\>taskkill /?

TASKKILL [/S system [/U username [/P [password]]]]
         { [/FI filter] [/PID processid | /IM imagename] } [/T] [/F]

Description:
    This tool is used to terminate tasks by process id (PID) or image name.

Parameter List:
    /S    system           Specifies the remote system to connect to.

    /U    [domain\]user    Specifies the user context under which the
                           command should execute.

    /P    [password]       Specifies the password for the given user
                           context. Prompts for input if omitted.

    /FI   filter           Applies a filter to select a set of tasks.
                           Allows "*" to be used. ex. imagename eq acme*

    /PID  processid        Specifies the PID of the process to be terminated.
                           Use TaskList to get the PID.

    /IM   imagename        Specifies the image name of the process
                           to be terminated. Wildcard '*' can be used
                           to specify all tasks or image names.

    /T                     Terminates the specified process and any
                           child processes which were started by it.

    /F                     Specifies to forcefully terminate the process(es).

    /?                     Displays this help message.

There's a JSON section in the PHP's documentation. You'll need PHP 5.2.0 though.

As of PHP 5.2.0, the JSON extension is bundled and compiled into PHP by default.

If you don't, here's the PECL library you can install.

<?php
    $arr = array ('a'=>1,'b'=>2,'c'=>3,'d'=>4,'e'=>5);

    echo json_encode($arr); // {"a":1,"b":2,"c":3,"d":4,"e":5}
?>

For only digits input use android:inputType="numberPassword" along with editText.setTransformationMethod(null); to remove auto-hiding of the number.

OR

android:inputType="phone"

For only digits input, I feel these couple ways are better than android:inputType="number". The limitation of mentioning "number" as inputType is that the keyboard allows to switch over to characters and also lets other special characters be entered. "numberPassword" inputType doesn't have those issues as the keyboard only shows digits. Even "phone" inputType works as the keyboard doesnt allow you to switch over to characters. But you can still enter couple special characters like +, /, N, etc.

android:inputType="numberPassword" with editText.setTransformationMethod(null);

inputType="phone"

inputType="number"

In my case, after some refactoring in EF6, my tests were failing with the same error message as the original poster but my solution had nothing to do with the DateTime fields.

I was just missing a required field when creating the entity. Once I added the missing field, the error went away. My entity does have two DateTime? fields but they weren't the problem.

The datasource is by default .\SQLEXPRESS (its the instance where databases are placed by default) or if u changed the name of the instance during installation of sql server so i advise you to do this :

connectionString="Data Source=.\\yourInstance(defaulT Data source is SQLEXPRESS);
       Initial Catalog=databaseName;
       User ID=theuser if u use it;
       Password=thepassword if u use it;
       integrated security=true(if u don t use user and pass; else change it false)"

Without to knowing your instance, I could help with this one. Hope it helped

instead of newdata you are using newdate in your predict code, verify once. and just use Coupon$estimate <- predict(model, Coupon) It will work.

To inactivate the non-desktop styles you just have to change 4 lines of code in the variables.less file. Set the screen width breakpoints in the variables.less file like this:

// Media queries breakpoints
// --------------------------------------------------

// Extra small screen / phone
// Note: Deprecated @screen-xs and @screen-phone as of v3.0.1
@screen-xs:                  1px;
@screen-xs-min:              @screen-xs;
@screen-phone:               @screen-xs-min;

// Small screen / tablet
// Note: Deprecated @screen-sm and @screen-tablet as of v3.0.1
@screen-sm:                  2px;
@screen-sm-min:              @screen-sm;
@screen-tablet:              @screen-sm-min;

// Medium screen / desktop
// Note: Deprecated @screen-md and @screen-desktop as of v3.0.1
@screen-md:                  3px;
@screen-md-min:              @screen-md;
@screen-desktop:             @screen-md-min;

// Large screen / wide desktop
// Note: Deprecated @screen-lg and @screen-lg-desktop as of v3.0.1
@screen-lg:                  9999px;
@screen-lg-min:              @screen-lg;
@screen-lg-desktop:          @screen-lg-min;

This sets the min-width on the desktop style media query lower so that it applies to all screen widths. Thanks to 2calledchaos for the improvement! Some base styles are defined in the mobile styles, so we need to be sure to include them.

Edit: chris notes that you can set these variables in the online less compiler on the bootstrap site

I also Had to filter based on the URL pattern(/{servicename}/api/stats/)in java code .

if (path.startsWith("/{servicename}/api/statistics/")) {
validatingAuthToken(((HttpServletRequest) request).getHeader("auth_token"));
filterChain.doFilter(request, response);            
}

But its bizarre, that servlet doesn't support url pattern other than (/*), This should be a very common case for servlet API's !

select name, value 
from( select name, value, ROW_NUMBER() OVER(PARTITION BY name ORDER BY value desc) as rn
from out_pumptable ) as a
where rn = 1

I had this error when running my application with Eclipse CDT on Linux x86.
To fix this:

1. In Eclipse:

   Run as -> Run configurations -> Environment

2. Set the path

   LD_LIBRARY_PATH=/my_lib_directory_path
   

i prefer to physically print my tables instead:

CONNECT_SERVER="https://196.168.1.1/"
CONNECT_API_KEY<-"hpphotosmartP9000:8273827"

data.frame = data.frame(1:1000, 1000:2)

connectServer <- Sys.getenv("CONNECT_SERVER")
apiKey <- Sys.getenv("CONNECT_API_KEY")

install.packages('print2print')

print2print::send2printer(connectServer, apiKey, data.frame)

It's been quite a while, but this may satisfy you :

Public MyVariable as Integer: MyVariable = 123

It's a bit ugly since you have to retype the variable name, but it's on one line.

Keep your private key, public key, known_hosts in same directory and try login as below:

ssh -I(small i) "hi.pem" ec2-user@ec2-**-***-**-***.us-west-2.compute.amazonaws.com

• Same directory in the sense, cd /Users/prince/Desktop. Now type ls command and you should see **.pem **.ppk known_hosts

Note: You have to try to login from the same directory or you'll get a permission denied error as it can't find the .pem file from your present directory.

If you want to be able to SSH from any directory, you can add the following to you ~/.ssh/config file...

Host your.server
HostName ec2-user@ec2-**-***-**-***.us-west-2.compute.amazonaws.com
User ec2-user
IdentityFile ~/.ec2/id_rsa-gsg-keypair
IdentitiesOnly yes

Now you can SSH to your server regardless of where the directory is by simply typing ssh your.server (or whatever name you place after "Host").

Set the Maximise property to False.

Regardless of the version, for your example, the <update> is:

{  $set: { lastLookedAt: Date.now() / 1000 }  }

However, depending on your version of MongoDB, the query will look different. Regardless of version, the key is that the empty condition {} will match any document. In the Mongo shell, or with any MongoDB client:

$version >= 3.2:

db.foo.updateMany( {}, <update> )

• {} is the condition (the empty condition matches any document)

3.2 > $version >= 2.2:

db.foo.update( {}, <update>, { multi: true } )

• {} is the condition (the empty condition matches any document)
• {multi: true} is the "update multiple documents" option

$version < 2.2:

db.foo.update( {}, <update>, false, true )

• {} is the condition (the empty condition matches any document)
• false is for the "upsert" parameter
• true is for the "multi" parameter (update multiple records)

For your first method change ws.Range("A") to ws.Range("A:A") which will search the entirety of column a, like so:

Sub Find_Bingo()

        Dim wb As Workbook
        Dim ws As Worksheet
        Dim FoundCell As Range
        Set wb = ActiveWorkbook
        Set ws = ActiveSheet

            Const WHAT_TO_FIND As String = "Bingo"

            Set FoundCell = ws.Range("A:A").Find(What:=WHAT_TO_FIND)
            If Not FoundCell Is Nothing Then
                MsgBox (WHAT_TO_FIND & " found in row: " & FoundCell.Row)
            Else
                MsgBox (WHAT_TO_FIND & " not found")
            End If
End Sub

For your second method, you are using Bingo as a variable instead of a string literal. This is a good example of why I add Option Explicit to the top of all of my code modules, as when you try to run the code it will direct you to this "variable" which is undefined and not intended to be a variable at all.

Additionally, when you are using With...End With you need a period . before you reference Cells, so Cells should be .Cells. This mimics the normal qualifying behavior (i.e. Sheet1.Cells.Find..)

Change Bingo to "Bingo" and change Cells to .Cells

With Sheet1
        Set FoundCell = .Cells.Find(What:="Bingo", After:=.Cells(1, 1), _
        LookIn:=xlValues, lookat:=xlPart, SearchOrder:=xlByRows, _
        SearchDirection:=xlNext, MatchCase:=False, SearchFormat:=False)
    End With

If Not FoundCell Is Nothing Then
        MsgBox ("""Bingo"" found in row " & FoundCell.Row)
Else
        MsgBox ("Bingo not found")
End If

Update

In my

With Sheet1
    .....
End With

The Sheet1 refers to a worksheet's code name, not the name of the worksheet itself. For example, say I open a new blank Excel workbook. The default worksheet is just Sheet1. I can refer to that in code either with the code name of Sheet1 or I can refer to it with the index of Sheets("Sheet1"). The advantage to using a codename is that it does not change if you change the name of the worksheet.

Continuing this example, let's say I renamed Sheet1 to Data. Using Sheet1 would continue to work, as the code name doesn't change, but now using Sheets("Sheet1") would return an error and that syntax must be updated to the new name of the sheet, so it would need to be Sheets("Data").

In the VB Editor you would see something like this:

Notice how, even though I changed the name to Data, there is still a Sheet1 to the left. That is what I mean by codename.

The Data worksheet can be referenced in two ways:

Debug.Print Sheet1.Name
Debug.Print Sheets("Data").Name

Both should return Data

More discussion on worksheet code names can be found here.

URL url = new URL("https://test.domain:443");   
String  keyStore = "server.p12"
String   keyStorePassword = "changeit";    
String  keyPassword = "changeit";    
String   KeyStoreType= "PKCS12";    
String   KeyManagerAlgorithm = "SunX509";    
String   SSLVersion = "SSLv3";    
public HttpURLConnection getHttpsURLConnection(URL url, String  keystore,
    String   keyStorePass,String  keyPassword, String  KeyStoreType
    ,String KeyManagerAlgorithm, String  SSLVersion)
    throws NoSuchAlgorithmException, KeyStoreException,
        CertificateException, FileNotFoundException, IOException,
        UnrecoverableKeyException, KeyManagementException {
    System.setProperty("javax.net.debug","ssl,handshake,record");

    SSLContext sslcontext = SSLContext.getInstance(SSLVersion);
    KeyManagerFactory kmf =  KeyManagerFactory.getInstance(KeyManagerAlgorithm);
    KeyStore ks = KeyStore.getInstance(KeyStoreType);
    ks.load(new FileInputStream(keystore), keyStorePass.toCharArray());
    kmf.init(ks, keyPassword.toCharArray());

     TrustManagerFactory tmf = TrustManagerFactory
            .getInstance(TrustManagerFactory.getDefaultAlgorithm());
    tmf.init(ks);
    TrustManager[] tm = tmf.getTrustManagers();

    sslcontext.init(kmf.getKeyManagers(), tm, null);
    SSLSocketFactory sslSocketFactory = sslcontext.getSocketFactory();
    HttpsURLConnection.setDefaultSSLSocketFactory(sslSocketFactory);
    HttpsURLConnection httpsURLConnection = ( HttpsURLConnection)uRL.openConnection();

    return httpsURLConnection;
}

I would recommend doing it like this to keep things in line with HTML5.

<meta charset="UTF-8">

EG:

<!DOCTYPE html>
<html lang="en">
<head>
    <meta charset="UTF-8">
    <meta name="viewport" content="width=device-width, initial-scale=1.0">
    <title>Document</title>
</head>
<body>
</body>
</html>

I've tryied all answers of this topic, but just this below worked fine on my project.

Angular 7 and AGM Core 1.0.0-beta.7

<agm-map [latitude]="lat" [longitude]="long" [zoom]="zoom" [fitBounds]="true">
  <agm-marker latitude="{{localizacao.latitude}}" longitude="{{localizacao.longitude}}" [agmFitBounds]="true"
    *ngFor="let localizacao of localizacoesTec">
  </agm-marker>
</agm-map>

The properties [agmFitBounds]="true" at agm-marker and [fitBounds]="true" at agm-map does the job

function chgAction( action_name )
{
    if( action_name=="aaa" ) {
        document.search-theme-form.action = "/AAA";
    }
    else if( action_name=="bbb" ) {
        document.search-theme-form.action = "/BBB";
    }
    else if( action_name=="ccc" ) {
        document.search-theme-form.action = "/CCC";
    }
}

And your form needs to have name in this case:

<form action="/"  accept-charset="UTF-8" method="post" name="search-theme-form" id="search-theme-form">

Beside the well-known (and already mentioned) System.currentTimeMillis() and System.nanoTime() there is also a neat library called perf4j which might be useful too, depending on your purpose of course.

Yes, you can even change it by triggering an event

<input type='text' name='pass'  onclick="(this.type='password')" />


<input type="text" placeholder="date" onfocusin="(this.type='date')" onfocusout="(this.type='text')">

The way to keep SELECT dbo.fCalculateEstimateDate(647) call working is:

ALTER function [dbo].[fCalculateEstimateDate] (@vWorkOrderID numeric)
Returns varchar(100)  AS
   Declare @Result varchar(100)
   SELECT @Result = [dbo].[fCalculateEstimateDate_v2] (@vWorkOrderID,DEFAULT)
   Return @Result
Begin
End

CREATE function [dbo].[fCalculateEstimateDate_v2] (@vWorkOrderID numeric,@ToDate DateTime=null)
Returns varchar(100)  AS
Begin
  <Function Body>
End

Here is the shortest solution (One Liner) ES6:

Math.max(...values.map(o => o.y));

$hash_type$salt$password

If the hash does not use a salt, then there is no $ sign for that. The actual hash in your case is after the 2nd $

The reason for this is, so you can have many types of hashes with different salts and feeds that string into a function that knows how to match it with some other value.

For Windows, here's a link to an example batch file that only allows changes to the log message (not other properties):

http://ayria.livejournal.com/33438.html

Basically copy the code below into a text file and name it pre-revprop-change.bat and save it in the \hooks subdirectory for your repository.

@ECHO OFF
:: Set all parameters. Even though most are not used, in case you want to add
:: changes that allow, for example, editing of the author or addition of log messages.
set repository=%1
set revision=%2
set userName=%3
set propertyName=%4
set action=%5

:: Only allow the log message to be changed, but not author, etc.
if /I not "%propertyName%" == "svn:log" goto ERROR_PROPNAME

:: Only allow modification of a log message, not addition or deletion.
if /I not "%action%" == "M" goto ERROR_ACTION

:: Make sure that the new svn:log message is not empty.
set bIsEmpty=true
for /f "tokens=*" %%g in ('find /V ""') do (
set bIsEmpty=false
)
if "%bIsEmpty%" == "true" goto ERROR_EMPTY

goto :eof

:ERROR_EMPTY
echo Empty svn:log messages are not allowed. >&2
goto ERROR_EXIT

:ERROR_PROPNAME
echo Only changes to svn:log messages are allowed. >&2
goto ERROR_EXIT

:ERROR_ACTION
echo Only modifications to svn:log revision properties are allowed. >&2
goto ERROR_EXIT

:ERROR_EXIT
exit /b 1

Worked for me below code:

DateTime date = DateTime.Parse(this.Text, CultureInfo.CreateSpecificCulture("fr-FR"));

Namespace

using System.Globalization;

If I were you, I would set the scale of the BigDecimal so that I dont end up on lengthy numbers. The integer 2 in the BigDecimal initialization below sets the scale.

Since you have lots of mismatch of data type, I have changed it accordingly to adjust.

class Payment   
{
      BigDecimal itemCost=new BigDecimal(BigInteger.ZERO,  2);
      BigDecimal totalCost=new BigDecimal(BigInteger.ZERO,  2);

     public BigDecimal calculateCost(int itemQuantity,BigDecimal itemPrice)
       { 
           BigDecimal   itemCost = itemPrice.multiply(new BigDecimal(itemQuantity)); 
             return totalCost.add(itemCost); 
       }
  }

BigDecimals are Object , not primitives, so make sure you initialize itemCost and totalCost , otherwise it can give you nullpointer while you try to add on totalCost or itemCost

String fname = ((EditText)findViewById(R.id.txtFirstName)).getText().toString();
String lname = ((EditText)findViewById(R.id.txtLastName)).getText().toString();
((EditText)findViewById(R.id.txtFullName)).setText(fname + " "+lname);

To say it differently: When you insert a key-value-pair into a HashMap where the key already exists (in a sense hashvalue() gives the same value und equal() is true, but the two objects can still differ in several ways), the key isn't replaced but the value is overwritten. The key is just used to get the hashvalue() and find the value in the table with it. Since HashSet uses the keys of a HashMap and sets arbitrary values which don't really matter (to the user) as a result the Elements of the Set aren't replaced either.

no need to use user and password as part of the URL

you can try this

byte[] encodedBytes = Base64.encodeBase64("user:passwd".getBytes());

String USER_PASS = new String(encodedBytes);

HttpUriRequest request = RequestBuilder.get(url).addHeader("Authorization", USER_PASS).build();

I know this post is realy old but now that some time and ant versions passed there is a way to do this with basic ant features and i thought i should share it.

It's done via a recursive macrodef that calls nested tasks (even other macros may be called). The only convention is to use a fixed variable name (element here).

<project name="iteration-test" default="execute" xmlns="antlib:org.apache.tools.ant" xmlns:if="ant:if" xmlns:unless="ant:unless">

    <macrodef name="iterate">
        <attribute name="list" />
        <element name="call" implicit="yes" />
        <sequential>
            <local name="element" />
            <local name="tail" />
            <local name="hasMoreElements" />
            <!-- unless to not get a error on empty lists -->
            <loadresource property="element" unless:blank="@{list}" >
                <concat>@{list}</concat>
                <filterchain>
                    <replaceregex pattern="([^;]*).*" replace="\1" />
                </filterchain>
            </loadresource>
            <!-- call the tasks that handle the element -->
            <call />

            <!-- recursion -->
            <condition property="hasMoreElements">
                <contains string="@{list}" substring=";" />
            </condition>

            <loadresource property="tail" if:true="${hasMoreElements}">
                <concat>@{list}</concat>
                <filterchain>
                    <replaceregex pattern="[^;]*;(.*)" replace="\1" />
                </filterchain>
            </loadresource>

            <iterate list="${tail}" if:true="${hasMoreElements}">
                <call />
            </iterate>
        </sequential>
    </macrodef>

    <target name="execute">
        <fileset id="artifacts.fs" dir="build/lib">
            <include name="*.jar" />
            <include name="*.war" />
        </fileset>

        <pathconvert refid="artifacts.fs" property="artifacts.str" />

        <echo message="$${artifacts.str}: ${artifacts.str}" />
        <!-- unless is required for empty lists to not call the enclosed tasks -->
        <iterate list="${artifacts.str}" unless:blank="${artifacts.str}">
            <echo message="I see:" />
            <echo message="${element}" />
        </iterate>
        <!-- local variable is now empty -->
        <echo message="${element}" />
    </target>
</project>

The key features needed where:

• http://ant.apache.org/manual/ifunless.html introduced in ant 1.9.1 (credits to ant conditional if within a macrodef)
• substrings, many thanks to How to pull out a substring in Ant
• the inline macrodef element.

I didnt manage to make the delimiter variabel, but this may not be a major downside.

I don't understand where the first "result with sample data" is coming from, but the problem in the console app is that you're using SelectMany to look at each item in each group.

I think you just want:

List<ResultLine> result = Lines
    .GroupBy(l => l.ProductCode)
    .Select(cl => new ResultLine
            {
                ProductName = cl.First().Name,
                Quantity = cl.Count().ToString(),
                Price = cl.Sum(c => c.Price).ToString(),
            }).ToList();

The use of First() here to get the product name assumes that every product with the same product code has the same product name. As noted in comments, you could group by product name as well as product code, which will give the same results if the name is always the same for any given code, but apparently generates better SQL in EF.

I'd also suggest that you should change the Quantity and Price properties to be int and decimal types respectively - why use a string property for data which is clearly not textual?

There is always dry-run:

git push --dry-run

It will do everything except for the actually sending of the data.

If you want a more graphical view you have a bunch of options.

Tig and the gitk script that come with git both display the current branch of your local copy and the branch of the remote or origin.

So any commits you make that are after the origin are the commits that will be pushed.

Open gitk from shell while in the branch you want to push by typing gitk&, then to see the difference between what is on the remote and what you are about to push to the remote, select your local unpushed commit and right-click on the remote and choose "Diff this -> selected":

Refining upon the answers found here:

little trick

getCurrentScript and getCurrentScriptPath

I came up with the following:

//Thanks to https://stackoverflow.com/a/27369985/5175935
var getCurrentScript = function () {

    if ( document.currentScript && ( document.currentScript.src !== '' ) )
        return document.currentScript.src;
    var scripts = document.getElementsByTagName( 'script' ),
        str = scripts[scripts.length - 1].src;
    if ( str !== '' )
        return src;
    //Thanks to https://stackoverflow.com/a/42594856/5175935
    return new Error().stack.match(/(https?:[^:]*)/)[0];

};

//Thanks to https://stackoverflow.com/a/27369985/5175935
var getCurrentScriptPath = function () {
    var script = getCurrentScript(),
        path = script.substring( 0, script.lastIndexOf( '/' ) );
    return path;
};

As far as I know, it doesn't matter which one you use. They're equivalent in the eyes of the compiler. Use whichever one you prefer. I normally use class.

In my case, I had the wrong @Transactional imported.

The correct one is:

import org.springframework.transaction.annotation.Transactional;

and not

import javax.transaction.Transactional;

I had the exact same issue, after rightly have configured in Mac OSX host a SharedFolder with Auto-Mount enabled. On the Guest OS, it is also required to install VirtualBox Guest Additions. For the case of Windows, it is:

VBoxWindowsAdditions.exe

Right after this installation, i could perfectly view the shared folder content under This PC and Network ("\VBOXSVR\Installers").

Have a look at the "Jetty" web server Jetty. Superb piece of Open Source software that would seem to meet all your requirments.

If you insist on rolling your own then have a look at the "httpMessage" class.

You have to perform the GridView1.Columns[i].Visible = false; after the grid has been databound.

You can get value of id,name or value in this way. class name my_class

 var id_value = $('.my_class').$(this).attr('id'); //get id value
 var name_value = $('.my_class').$(this).attr('name'); //get name value
 var value = $('.my_class').$(this).attr('value'); //get value any input or tag

You need use patches.

import matplotlib.pyplot as plt
import matplotlib.patches as patches

fig2 = plt.figure()
ax2 = fig2.add_subplot(111, aspect='equal')

ax2.add_patch(
     patches.Rectangle(
        (0.1, 0.1),
        0.5,
        0.5,
        fill=False      # remove background
     ) ) 
fig2.savefig('rect2.png', dpi=90, bbox_inches='tight')

You need to use a ServerSocket. You can find an explanation here.

adb shell pm list packages will give you a list of all installed package names.

You can then use dumpsys | grep -A18 "Package \[my.package\]" to grab the package information such as version identifiers etc

The simplest way to do this is with the onto option to rebase. Suppose that the branch which current finishes at a is called mybranch and this is the branch that you want to move c-f onto.

# checkout mybranch
git checkout mybranch

# reset it to f (currently includes a)
git reset --hard f

# rebase every commit after b and transplant it onto a
git rebase --onto a b

You say loop .. so if you want to do this for a dir instead of the current document;

Dim sFile As Variant
Dim oShell: Set oShell = CreateObject("Shell.Application")
Dim oDir:   Set oDir = oShell.Namespace("c:\foo")

For Each sFile In oDir.Items
   Debug.Print oDir.GetDetailsOf(sFile, XXX) 
Next

Where XXX is an attribute column index, 9 for Author for example. To list available indexes for your reference you can replace the for loop with;

for i = 0 To 40
   debug.? i, oDir.GetDetailsOf(oDir.Items, i)
Next

Quickly for a single file/attribute:

Const PROP_COMPUTER As Long = 56

With CreateObject("Shell.Application").Namespace("C:\HOSTDIRECTORY")
    MsgBox .GetDetailsOf(.Items.Item("FILE.NAME"), PROP_COMPUTER)
End With

Another "trick" for generating the column list is simply to drag the "Columns" node from Object Explorer onto a query window.

Here is another way to display PDF inside Div by using Iframe like below.

<div>_x000D_
  <iframe src="/pdf/test.pdf" style="width:100%;height:700px;"></iframe>_x000D_
</div>_x000D_
<div>_x000D_
  <!-- I agree button -->_x000D_
</div>

On linux ubuntu 20.04 I needed few steps,downgrade node first to apropriate version,remove node_modules,run yarn install and finally run sudo yarn add [email protected] --force.Node version 10.0.0. Only working way for me.

You can use "RunasDate" to solve this.

Use System.currentTimeMillis() or System.nanoTime().

From here:

The Content-Length entity-header field indicates the size of the entity-body, in decimal number of OCTETs, sent to the recipient or, in the case of the HEAD method, the size of the entity-body that would have been sent had the request been a GET.

   Content-Length    = "Content-Length" ":" 1*DIGIT

An example is

   Content-Length: 3495

Applications SHOULD use this field to indicate the transfer-length of the message-body, unless this is prohibited by the rules in section 4.4.

Any Content-Length greater than or equal to zero is a valid value. Section 4.4 describes how to determine the length of a message-body if a Content-Length is not given.

Note that the meaning of this field is significantly different from the corresponding definition in MIME, where it is an optional field used within the "message/external-body" content-type. In HTTP, it SHOULD be sent whenever the message's length can be determined prior to being transferred, unless this is prohibited by the rules in section 4.4.

My interpretation is that this means the length "on the wire", i.e. the length of the *encoded" content

Either you use a framework or you write your own server with nodejs.

A simple fileserver may look like this:

import * as http from 'http';
import * as url from 'url';
import * as fs from 'fs';
import * as path from 'path';

var mimeTypes = {
     "html": "text/html",
     "jpeg": "image/jpeg",
     "jpg": "image/jpeg",
     "png": "image/png",
     "js": "text/javascript",
     "css": "text/css"};

http.createServer((request, response)=>{
    var pathname = url.parse(request.url).pathname;
    var filename : string;
    if(pathname === "/"){
        filename = "index.html";
    }
    else
        filename = path.join(process.cwd(), pathname);

    try{
        fs.accessSync(filename, fs.F_OK);
        var fileStream = fs.createReadStream(filename);
        var mimeType = mimeTypes[path.extname(filename).split(".")[1]];
        response.writeHead(200, {'Content-Type':mimeType});
        fileStream.pipe(response);
    }
    catch(e) {
            console.log('File not exists: ' + filename);
            response.writeHead(404, {'Content-Type': 'text/plain'});
            response.write('404 Not Found\n');
            response.end();
            return;
    }
    return;
    }
}).listen(5000);

Or you could just do it that way:

public String controllerMethod(@RequestParam(value="myParam[]") String[] myParams){
    ....
}

That works for example for forms like this:

<input type="checkbox" name="myParam[]" value="myVal1" />
<input type="checkbox" name="myParam[]" value="myVal2" />

This is the simplest solution :)

If you declare a class in module file instead of the simple object

File: UserModule.js

//User Module    
class User {
  constructor(){
    //enter code here
  }
  create(params){
    //enter code here
  }
}
class UserInfo {
  constructor(){
    //enter code here
  }
  getUser(userId){
    //enter code here
    return user;
  }
}

// export multi
module.exports = [User, UserInfo];

Main File: index.js

// import module like
const { User, UserInfo } = require("./path/to/UserModule");
User.create(params);
UserInfo.getUser(userId);

PECS (Producer extends and Consumer super)

mnemonic ? Get and Put principle.

This principle states that:

• Use an extends wildcard when you only get values out of a structure.
• Use a super wildcard when you only put values into a structure.
• And don’t use a wildcard when you both get and put.

Example in Java:

class Super {
        Number testCoVariance() {
            return null;
        }
        void testContraVariance(Number parameter) {
        } 
    }
    
    class Sub extends Super {
        @Override
        Integer testCoVariance() {
            return null;
        } //compiles successfully i.e. return type is don't care(Integer is subtype of Number)
        @Override
        void testContraVariance(Integer parameter) {
        } //doesn't support even though Integer is subtype of Number
    }

The Liskov Substitution Principle (LSP) states that “objects in a program should be replaceable with instances of their subtypes without altering the correctness of that program”.

Within the type system of a programming language, a typing rule

• covariant if it preserves the ordering of types (=), which orders types from more specific to more generic;
• contravariant if it reverses this ordering;
• invariant or nonvariant if neither of these applies.

Covariance and contravariance

• Read-only data types (sources) can be covariant;
• write-only data types (sinks) can be contravariant.
• Mutable data types which act as both sources and sinks should be invariant.

To illustrate this general phenomenon, consider the array type. For the type Animal we can make the type Animal[]

• covariant: a Cat[] is an Animal[];
• contravariant: an Animal[] is a Cat[];
• invariant: an Animal[] is not a Cat[] and a Cat[] is not an Animal[].

Java Examples:

Object name= new String("prem"); //works
List<Number> numbers = new ArrayList<Integer>();//gets compile time error

Integer[] myInts = {1,2,3,4};
Number[] myNumber = myInts;
myNumber[0] = 3.14; //attempt of heap pollution i.e. at runtime gets java.lang.ArrayStoreException: java.lang.Double(we can fool compiler but not run-time)

List<String> list=new ArrayList<>();
list.add("prem");
List<Object> listObject=list; //Type mismatch: cannot convert from List<String> to List<Object> at Compiletime  

more examples

Image src

bounded(i.e. heading toward somewhere) wildcard : There are 3 different flavours of wildcards:

• In-variance/Non-variance: ? or ? extends Object - Unbounded Wildcard. It stands for the family of all types. Use when you both get and put.
• Co-variance: ? extends T (the family of all types that are subtypes of T) - a wildcard with an upper bound. T is the upper-most class in the inheritance hierarchy. Use an extends wildcard when you only Get values out of a structure.
• Contra-variance: ? super T ( the family of all types that are supertypes of T) - a wildcard with a lower bound. T is the lower-most class in the inheritance hierarchy. Use a super wildcard when you only Put values into a structure.

Note: wildcard ? means zero or one time, represents an unknown type. The wildcard can be used as the type of a parameter, never used as a type argument for a generic method invocation, a generic class instance creation.(i.e. when used wildcard that reference not used in elsewhere in program like we use T)

 import java.util.ArrayList;
import java.util.List;

class Shape { void draw() {}}

class Circle extends Shape {void draw() {}}

class Square extends Shape {void draw() {}}

class Rectangle extends Shape {void draw() {}}

public class Test {

    public static void main(String[] args) {
        //? extends Shape i.e. can use any sub type of Shape, here Shape is Upper Bound in inheritance hierarchy
        List<? extends Shape> intList5 = new ArrayList<Shape>();
        List<? extends Shape> intList6 = new ArrayList<Cricle>();
        List<? extends Shape> intList7 = new ArrayList<Rectangle>();
        List<? extends Shape> intList9 = new ArrayList<Object>();//ERROR.


        //? super Shape i.e. can use any super type of Shape, here Shape is Lower Bound in inheritance hierarchy
        List<? super Shape> inList5 = new ArrayList<Shape>();
        List<? super Shape> inList6 = new ArrayList<Object>();
        List<? super Shape> inList7 = new ArrayList<Circle>(); //ERROR.

        //-----------------------------------------------------------
        Circle circle = new Circle();
        Shape shape = circle; // OK. Circle IS-A Shape

        List<Circle> circles = new ArrayList<>();
        List<Shape> shapes = circles; // ERROR. List<Circle> is not subtype of List<Shape> even when Circle IS-A Shape

        List<? extends Circle> circles2 = new ArrayList<>();
        List<? extends Shape> shapes2 = circles2; // OK. List<? extends Circle> is subtype of List<? extends Shape>


        //-----------------------------------------------------------
        Shape shape2 = new Shape();
        Circle circle2= (Circle) shape2; // OK. with type casting

        List<Shape> shapes3 = new ArrayList<>();
        List<Circle> circles3 = shapes3; //ERROR. List<Circle> is not subtype of  List<Shape> even Circle is subetype of Shape

        List<? super Shape> shapes4 = new ArrayList<>();
        List<? super Circle> circles4 = shapes4; //OK.
    }

    
    
    /*
     * Example for an upper bound wildcard (Get values i.e Producer `extends`)
     *
     * */
    public void testCoVariance(List<? extends Shape> list) {
        list.add(new Object());//ERROR
        list.add(new Shape()); //ERROR
        list.add(new Circle()); // ERROR
        list.add(new Square()); // ERROR
        list.add(new Rectangle()); // ERROR
        Shape shape= list.get(0);//OK so list act as produces only
    /*
     * You can't add a Shape,Circle,Square,Rectangle to a List<? extends Shape>
     * You can get an object and know that it will be an Shape
     */
    }
    
    
    /*
     * Example for  a lower bound wildcard (Put values i.e Consumer`super`)
     * */
    public void testContraVariance(List<? super Shape> list) {
        list.add(new Object());//ERROR
        list.add(new Shape());//OK
        list.add(new Circle());//OK
        list.add(new Square());//OK
        list.add(new Rectangle());//OK
        Shape shape= list.get(0); // ERROR. Type mismatch, so list acts only as consumer
        Object object= list.get(0); //OK gets an object, but we don't know what kind of Object it is.
        /*
         * You can add a Shape,Circle,Square,Rectangle to a List<? super Shape>
         * You can't get an Shape(but can get Object) and don't know what kind of Shape it is.
         */
    }
}

generics and examples

Covariance and contravariance determine compatibility based on types. In either case, variance is a directed relation. Covariance can be translated as "different in the same direction," or with-different, whereas contravariance means "different in the opposite direction," or against-different. Covariant and contravariant types are not the same, but there is a correlation between them. The names imply the direction of the correlation.

This situation calls for some preprocessor. Because if you write a function (static method) which picks the first not null value, it evaluates all items. It is problem if some items are method calls (may be time expensive method calls). And this methods are called even if any item before them is not null.

Some function like this

public static <T> T coalesce(T ...items) …

should be used but before compiling into byte code there should be a preprocessor which find usages of this „coalesce function“ and replaces it with construction like

a != null ? a : (b != null ? b : c)

Update 2014-09-02:

Thanks to Java 8 and Lambdas there is possibility to have true coalesce in Java! Including the crucial feature: particular expressions are evaluated only when needed – if earlier one is not null, then following ones are not evaluated (methods are not called, computation or disk/network operations are not done).

I wrote an article about it Java 8: coalesce – hledáme neNULLové hodnoty – (written in Czech, but I hope that code examples are understandable for everyone).

It seems like you're actually trying to extract a name vice simply find a match. If this is the case, having span indexes for your match is helpful and I'd recommend using re.finditer. As a shortcut, you know the name part of your regex is length 5 and the is valid is length 9, so you can slice the matching text to extract the name.

Note - In your example, it looks like s is string with line breaks, so that's what's assumed below.

## covert s to list of strings separated by line:
s2 = s.splitlines()

## find matches by line: 
for i, j in enumerate(s2):
    matches = re.finditer("name (.*) is valid", j)
    ## ignore lines without a match
    if matches:
        ## loop through match group elements
        for k in matches:
            ## get text
            match_txt = k.group(0)
            ## get line span
            match_span = k.span(0)
            ## extract username
            my_user_name = match_txt[5:-9]
            ## compare with original text
            print(f'Extracted Username: {my_user_name} - found on line {i}')
            print('Match Text:', match_txt)

navigate to the url http://jmeter.apache.org/download_jmeter.cgi-->download apache-jmeter-2.11.zip, which is under binaries.

this error is occurring since Apache jmeter.jar is missing in bin folder

Angular 7 Service:

    this.http.post(environment.urlRest + '/my-operation',body, { headers: headers, observe: 'response'});
    

    this.myService.myfunction().subscribe(
          (res: HttpResponse) => {
              console.log(res.headers.get('x-token'));
                }  ,
        error =>{
        }) 
    

I did it this way (you need to add a class text to <td> and put the text between a <span>:

HTML

<td class="text"><span>looooooong teeeeeeeeext</span></td>

SASS

.table td.text {
    max-width: 177px;
    span {
        white-space: nowrap;
        overflow: hidden;
        text-overflow: ellipsis;
        display: inline-block;
        max-width: 100%;
    }
}

CSS equivalent

.table td.text {
    max-width: 177px;
}
.table td.text span {
    white-space: nowrap;
    overflow: hidden;
    text-overflow: ellipsis;
    display: inline-block;
    max-width: 100%;
}

And it will still be mobile responsive (forget it with layout=fixed) and will keep the original behaviour.

PS: Of course 177px is a custom size (put whatever you need).

The way I figured this out was going through the example index.html/style.css that comes packaged with the Fancybox installation.

If you view the code that is used for the demo website and basically copy/paste, you'll be fine.

To get an inline Fancybox working, you will need to have this code present in your index.html file:

  <head>
    <link href="./fancybox/jquery.fancybox-1.3.4.css" rel="stylesheet" type="text/css" media="screen" />
    <script>!window.jQuery && document.write('<script src="jquery-1.4.3.min.js"><\/script>');</script>
    <script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1.4/jquery.min.js"></script>
    <script type="text/javascript" src="./fancybox/jquery.fancybox-1.3.4.pack.js"></script>
    <script type="text/javascript">
    $(document).ready(function() {

    $("#various1").fancybox({
            'titlePosition'     : 'inside',
            'transitionIn'      : 'none',
            'transitionOut'     : 'none'
        });
    });
    </script>
  </head>

 <body>

    <a id="various1" href="#inline1" title="Put a title here">Name of Link Here</a>
    <div style="display: none;">
        <div id="inline1" style="width:400px;height:100px;overflow:auto;">
                   Write whatever text you want right here!!
        </div>
    </div> 

</body>

Remember to be precise about what folders your script files are placed in and where you are pointing to in the Head tag; they must correspond.

@Adam: I think in your code snippet you should track the start position for m.find() because string replacement may change the offset after the last character matched.

public static void replaceAll(StringBuilder sb, Pattern pattern, String replacement) {
    Matcher m = pattern.matcher(sb);
    int start = 0;
    while (m.find(start)) {
        sb.replace(m.start(), m.end(), replacement);
        start = m.start() + replacement.length();
    }
}

In JavaScript Arrays and Objects are actually very similar, although on the outside they can look a bit different.

For an array:

var array = [];
array[0] = "hello";
array[1] = 5498;
array[536] = new Date();

As you can see arrays in JavaScript can be sparse (valid indicies don't have to be consecutive) and they can contain any type of variable! That's pretty convenient.

But as we all know JavaScript is strange, so here are some weird bits:

array["0"] === "hello"; // This is true
array["hi"]; // undefined
array["hi"] = "weird"; // works but does not save any data to array
array["hi"]; // still undefined!

This is because everything in JavaScript is an Object (which is why you can also create an array using new Array()). As a result every index in an array is turned into a string and then stored in an object, so an array is just an object that doesn't allow anyone to store anything with a key that isn't a positive integer.

So what are Objects?

Objects in JavaScript are just like arrays but the "index" can be any string.

var object = {};
object[0] = "hello"; // OK
object["hi"] = "not weird"; // OK

You can even opt to not use the square brackets when working with objects!

console.log(object.hi); // Prints 'not weird'
object.hi = "overwriting 'not weird'";

You can go even further and define objects like so:

var newObject = {
    a: 2,
};
newObject.a === 2; // true

Your code "for /f "tokens=* delims=" %%x in (a.txt) do echo %%x" will work on most Windows Operating Systems unless you have modified commands.

So you could instead "cd" into the directory to read from before executing the "for /f" command to follow out the string. For instance if the file "a.txt" is located at C:\documents and settings\%USERNAME%\desktop\a.txt then you'd use the following.

cd "C:\documents and settings\%USERNAME%\desktop"
for /f "tokens=* delims=" %%x in (a.txt) do echo %%x
echo.
echo.
echo.
pause >nul
exit

But since this doesn't work on your computer for x reason there is an easier and more efficient way of doing this. Using the "type" command.

@echo off
color a
cls
cd "C:\documents and settings\%USERNAME%\desktop"
type a.txt
echo.
echo.
pause >nul
exit

Or if you'd like them to select the file from which to write in the batch you could do the following.

@echo off
:A
color a
cls
echo Choose the file that you want to read.
echo.
echo.
tree
echo.
echo.
echo.
set file=
set /p file=File:
cls
echo Reading from %file%
echo.
type %file%
echo.
echo.
echo.
set re=
set /p re=Y/N?:
if %re%==Y goto :A
if %re%==y goto :A
exit

Christophe,

The default value on a column is only applied if you don't specify the column in the INSERT statement.

Since you're explicitiy listing the column in your insert statement, and explicity setting it to NULL, that's overriding the default value for that column

What you need to do is "if a null is passed into your sproc then don't attempt to insert for that column".

This is a quick and nasty example of how to do that with some dynamic sql.

Create a table with some columns with default values...

CREATE TABLE myTable (
    always VARCHAR(50),
    value1 VARCHAR(50) DEFAULT ('defaultcol1'),
    value2 VARCHAR(50) DEFAULT ('defaultcol2'),
    value3 VARCHAR(50) DEFAULT ('defaultcol3')
)

Create a SPROC that dynamically builds and executes your insert statement based on input params

ALTER PROCEDURE t_insert (
    @always VARCHAR(50),
    @value1 VARCHAR(50) = NULL,
    @value2 VARCHAR(50) = NULL,
    @value3 VARCAHR(50) = NULL
)
AS 
BEGIN
DECLARE @insertpart VARCHAR(500)
DECLARE @valuepart VARCHAR(500)

SET @insertpart = 'INSERT INTO myTable ('
SET @valuepart = 'VALUES ('

    IF @value1 IS NOT NULL
    BEGIN
        SET @insertpart = @insertpart + 'value1,'
        SET @valuepart = @valuepart + '''' + @value1 + ''', '
    END

    IF @value2 IS NOT NULL
    BEGIN
        SET @insertpart = @insertpart + 'value2,'
        SET @valuepart = @valuepart + '''' + @value2 + ''', '
    END

    IF @value3 IS NOT NULL
    BEGIN
        SET @insertpart = @insertpart + 'value3,'
        SET @valuepart = @valuepart + '''' + @value3 + ''', '
    END

    SET @insertpart = @insertpart + 'always) '
    SET @valuepart = @valuepart + + '''' + @always + ''')'

--print @insertpart + @valuepart
EXEC (@insertpart + @valuepart)
END

The following 2 commands should give you an example of what you want as your outputs...

EXEC t_insert 'alwaysvalue'
SELECT * FROM  myTable

EXEC t_insert 'alwaysvalue', 'val1'
SELECT * FROM  myTable

EXEC t_insert 'alwaysvalue', 'val1', 'val2', 'val3'
SELECT * FROM  myTable

I know this is a very convoluted way of doing what you need to do. You could probably equally select the default value from the InformationSchema for the relevant columns but to be honest, I might consider just adding the default value to param at the top of the procedure

There are 4 similar ways to prevent the page from jumping to the top without any JavaScript:

Option 1:

<a href="#0">Link</a>

Option 2:

<a href="#!">Link</a>

Option 3:

<a href="#/">Link</a>

Option 4 (Not recommended):

<a href="javascript:void(0);">Link</a>

But it's better to use event.preventDefault() if you are handing the click event in jQuery.

There is not a single function that will do that, because 0 is a valid number and you need to be able to catch when the string is not a valid number.

You will need to check the string first (probably with a regular expression) to see if it contains only numbers and numerical punctuation. You can then decide to return 0 if that is what your application needs or convert it to a double.

After looking up atof() and strtod() I should rephrase my statement to "there shouldn't be" instead of "there is not" ... hehe

$(document).ready( function() { YOUR CODE HERE } )

I had this issue and it was because the machine running the application isnt trusted for delegation on the domain by active directory. If it is a .net app running under an application pool identity DOMAIN_application.environment for example.. the identity can't make calls out to SQL unless the machine is trusted.

Using Java:

WebElement webElement = driver.findElement(By.xpath(""));//You can use xpath, ID or name whatever you like
webElement.sendKeys(Keys.TAB);
webElement.sendKeys(Keys.ENTER);

You can also use the 'sed' function that's part of ShellJS ...

 $ npm install [-g] shelljs


 require('shelljs/global');
 sed('-i', 'search_pattern', 'replace_pattern', file);

Visit ShellJs.org for more examples.

I know this is too old thread but why no one mentioned this

#!/usr/bin/python3
import asyncio 

loop = asyncio.get_event_loop()
try:
    loop.run_forever()
finally:
    loop.close()

First, what you are looking for is a column or bar diagram, not really a histogram. A histogram is made from a frequency distribution of a continuous variable that is separated into bins. Here you have a column against separate labels.

To make a bar diagram with matplotlib, use the matplotlib.pyplot.bar() method. Have a look at this page of the matplotlib documentation that explains very well with examples and source code how to do it.

If it is possible though, I would just suggest that for a simple task like this if you could avoid writing code that would be better. If you have any spreadsheet program this should be a piece of cake because that's exactly what they are for, and you won't have to 'reinvent the wheel'. The following is the plot of your data in Excel:

I just copied your data from the question, used the text import wizard to put it in two columns, then I inserted a column diagram.

1. You can use View.clearFocus().

2. Use View.requestFocus() called from onResume().

Obligatory jQuery solution. Finds and sets the title attribute to foo. Note this selects a single element since I'm doing it by id, but you could easily set the same attribute on a collection by changing the selector.

$('#element').attr( 'title', 'foo' );

Substrings with ${variablename:0:5} are a bash feature, not available in basic shells. Are you sure you're running this under bash? Check the shebang line (at the beginning of the script), and make sure it's #!/bin/bash, not #!/bin/sh. And make sure you don't run it with the sh command (i.e. sh scriptname), since that overrides the shebang.

The functions mentioned above execute no matter if it has completed in previous invocation or not, this one runs after every x seconds once the execution is complete

// IIFE
(function runForever(){
  // Do something here
  setTimeout(runForever, 5000)
})()

// Regular function with arguments
function someFunction(file, directory){
  // Do something here
  setTimeout(someFunction, 5000, file, directory)
  // YES, setTimeout passes any extra args to
  // function being called
}

E.g. ip 192.30.253.112 in warning:

$ git clone [email protected]:EXAMPLE.git
Cloning into 'EXAMPLE'...
Warning: Permanently added the RSA host key for IP address '192.30.253.112' to the list of known hosts.
remote: Enumerating objects: 135, done.
remote: Total 135 (delta 0), reused 0 (delta 0), pack-reused 135
Receiving objects: 100% (135/135), 9.49 MiB | 2.46 MiB/s, done.
Resolving deltas: 100% (40/40), done.

It's the ip if you nslookup github url:

$ nslookup github.com
Server:         127.0.0.53
Address:        127.0.0.53#53

Non-authoritative answer:
Name:   github.com
Address: 192.30.253.112
Name:   github.com
Address: 192.30.253.113

$ 

jQuery('input.disablePaste').keydown(function(event) {
    var forbiddenKeys = new Array('c', 'x', 'v');
    var keyCode = (event.keyCode) ? event.keyCode : event.which;
    var isCtrl;
    isCtrl = event.ctrlKey
    if (isCtrl) {
        for (i = 0; i < forbiddenKeys.length; i++) {
            if (forbiddenKeys[i] == String.fromCharCode(keyCode).toLowerCase()) {
                 return false;
            }
        }
    }
    return true;
});

Also, you can just set the ViewName:

return View("ViewName");

Full controller example:

public ActionResult SomeAction() {
    if (condition)
    {
        return View("CustomView");
    }else{
        return View();
    }
}

This works on MVC 5.

If You want to check only when scroll ended, in Vanilla JS, You can come up with a solution like this:

Super Super compact

var t
window.onresize = () => { clearTimeout(t) t = setTimeout(() => { resEnded() }, 500) }
function resEnded() { console.log('ended') }

All 3 possible combinations together (ES6)

var t
window.onresize = () => {
    resizing(this, this.innerWidth, this.innerHeight) //1
    if (typeof t == 'undefined') resStarted() //2
    clearTimeout(t); t = setTimeout(() => { t = undefined; resEnded() }, 500) //3
}

function resizing(target, w, h) {
    console.log(`Youre resizing: width ${w} height ${h}`)
}    
function resStarted() { 
    console.log('Resize Started') 
}
function resEnded() { 
    console.log('Resize Ended') 
}

echo "Enter Drive letter" 
set /p driveletter=

attrib -s -h -a /s /d  %driveletter%:\*.*

1. open task manager
2. select services tab
3. select the process( devenv.exe ) you want to kill and click services button
4. right on the process, select properties and disable it...

My icons had disappeared too. The registry fixes did not work for me either.

This is how I got them back:

1. install the latest version of TortoiseOverlays
2. restart explorer.exe

You can do this inside your $.post calls success callback like this

$.post('mail.php',{name:$('#name').val(),
                              email:$('#e-mail').val(),
                              phone:$('#phone').val(),
                              message:$('#message').val()},

            //return the data
            function(data){

              //hide the graphic
              $('.bar').css({display:'none'});
              $('.loader').append(data);

              //clear fields
              $('input[type="text"],textarea').val('');

            });

Also you can use postgres fdw system

https://www.postgresql.org/docs/9.5/postgres-fdw.html

You will be able to connect different db in postgres. After that, in one query, you can access tables that are in different databases.

UPDATE: I had some time on my hands, so ... I went ahead and fleshed out this idea. See below for the code.

Here's a bit of a crazy answer:

You could do what you're looking for -- essentially treat a two-dimensional array as a table with rows -- by writing a static method (perhaps an extension method) that takes a T[,] and returns an IEnumerable<T[]>. This would require copying each "row" of the underlying table into a new array, though.

A perhaps better (though more involved) approach would be to actually write a class that implements IList<T> as a wrapper around a single "row" of a two-dimensional array (you would probably set IsReadOnly to true and just implement the getter for the this[int] property and probably Count and GetEnumerator; everything else could throw a NotSupportedException). Then your static/extension method could return an IEnumerable<IList<T>> and provide deferred execution.

That way you could write code pretty much like what you have:

foreach (IList<string> row in table.GetRows()) // or something
{
    Console.WriteLine(row[0] + " " + row[1]);
}

Just a thought.

Implementation suggestion:

public static class ArrayTableHelper {
    public static IEnumerable<IList<T>> GetRows<T>(this T[,] table) {
        for (int i = 0; i < table.GetLength(0); ++i)
            yield return new ArrayTableRow<T>(table, i);
    }

    private class ArrayTableRow<T> : IList<T> {
        private readonly T[,] _table;
        private readonly int _count;
        private readonly int _rowIndex;

        public ArrayTableRow(T[,] table, int rowIndex) {
            if (table == null)
                throw new ArgumentNullException("table");

            if (rowIndex < 0 || rowIndex >= table.GetLength(0))
                throw new ArgumentOutOfRangeException("rowIndex");

            _table = table;
            _count = _table.GetLength(1);
            _rowIndex = rowIndex;
        }

        // I didn't implement the setter below,
        // but you easily COULD (and then set IsReadOnly to false?)
        public T this[int index] {
            get { return _table[_rowIndex, index]; }
            set { throw new NotImplementedException(); }
        }

        public int Count {
            get { return _count; }
        }

        bool ICollection<T>.IsReadOnly {
            get { return true; }
        }

        public IEnumerator<T> GetEnumerator() {
            for (int i = 0; i < _count; ++i)
                yield return this[i];
        }

        // omitted remaining IList<T> members for brevity;
        // you actually could implement IndexOf, Contains, etc.
        // quite easily, though
    }
}

...now I think I should give StackOverflow a break for the rest of the day ;)

I've had simmilar issue. change event was not good for me because i've needed to refresh some data when user clicks on option. After few trials i've got this solution:

$('select').on('click',function(ev){
    if(ev.offsetY < 0){
      //user click on option  
    }else{
      //dropdown is shown
    }
});

I agree that this is very ugly and you should stick with change event where you can, but this solved my problem.

I solved it using type = "text/babel"

<script src="js/reactjs/main.js" type = "text/babel"></script>

If you wanna go the modern way, you can do this:

const selectedOpts = [...field.options].filter((x) => x.selected);

The ... operator maps iterable (HTMLOptionsCollection) to the array.

If you're just interested in the values, you can add a map() call:

const selectedValues = [...field.options]
                     .filter((x) => x.selected)
                     .map((x)=>x.value);

In case you're using virtualenvwrapper (I highly recommend doing so), you can define different hooks (preactivate, postactivate, predeactivate, postdeactivate) using the scripts with the same names in $VIRTUAL_ENV/bin/. You need the postactivate hook.

$ workon myvenv

$ cat $VIRTUAL_ENV/bin/postactivate
#!/bin/bash
# This hook is run after this virtualenv is activated.
export DJANGO_DEBUG=True
export S3_KEY=mykey
export S3_SECRET=mysecret

$ echo $DJANGO_DEBUG
True

If you want to keep this configuration in your project directory, simply create a symlink from your project directory to $VIRTUAL_ENV/bin/postactivate.

$ rm $VIRTUAL_ENV/bin/postactivate
$ ln -s .env/postactivate $VIRTUAL_ENV/bin/postactivate

You could even automate the creation of the symlinks each time you use mkvirtualenv.

Cleaning up on deactivate

Remember that this wont clean up after itself. When you deactivate the virtualenv, the environment variable will persist. To clean up symmetrically you can add to $VIRTUAL_ENV/bin/predeactivate.

$ cat $VIRTUAL_ENV/bin/predeactivate
#!/bin/bash
# This hook is run before this virtualenv is deactivated.
unset DJANGO_DEBUG

$ deactivate

$ echo $DJANGO_DEBUG

Remember that if using this for environment variables that might already be set in your environment then the unset will result in them being completely unset on leaving the virtualenv. So if that is at all probable you could record the previous value somewhere temporary then read it back in on deactivate.

Setup:

$ cat $VIRTUAL_ENV/bin/postactivate
#!/bin/bash
# This hook is run after this virtualenv is activated.
if [[ -n $SOME_VAR ]]
then
    export SOME_VAR_BACKUP=$SOME_VAR
fi
export SOME_VAR=apple

$ cat $VIRTUAL_ENV/bin/predeactivate
#!/bin/bash
# This hook is run before this virtualenv is deactivated.
if [[ -n $SOME_VAR_BACKUP ]]
then
    export SOME_VAR=$SOME_VAR_BACKUP
    unset SOME_VAR_BACKUP
else
    unset SOME_VAR
fi

Test:

$ echo $SOME_VAR
banana

$ workon myenv

$ echo $SOME_VAR
apple

$ deactivate

$ echo $SOME_VAR
banana

There is always the easy way.

import numpy as np
print(np.matrix(A))

In the project path Terminal django_project#

sudo chown django:django *

Quite simply the number is the precision of the timestamp, the fraction of a second held in the column:

SQL> create table t23
  2  (ts0 timestamp(0)
  3   , ts3 timestamp(3)
  4  , ts6 timestamp(6)
  5  )
  6  /

Table created.

SQL> insert into t23 values (systimestamp, systimestamp, systimestamp)
  2  /

1 row created.

SQL> select * from t23
  2  /

TS0
---------------------------------------------------------------------------
TS3
---------------------------------------------------------------------------
TS6
---------------------------------------------------------------------------
24-JAN-12 05.57.12 AM
24-JAN-12 05.57.12.003 AM
24-JAN-12 05.57.12.002648 AM


SQL> 

If we don't specify a precision then the timestamp defaults to six places.

SQL> alter table t23 add ts_def timestamp;

Table altered.

SQL> update t23      
  2  set ts_def = systimestamp
  3  /

1 row updated.

SQL> select * from t23
  2  /

TS0
---------------------------------------------------------------------------
TS3
---------------------------------------------------------------------------
TS6
---------------------------------------------------------------------------
TS_DEF
---------------------------------------------------------------------------
24-JAN-12 05.57.12 AM
24-JAN-12 05.57.12.003 AM
24-JAN-12 05.57.12.002648 AM
24-JAN-12 05.59.27.293305 AM


SQL> 

Note that I'm running on Linux so my TIMESTAMP column actually gives me precision to six places i.e. microseconds. This would also be the case on most (all?) flavours of Unix. On Windows the limit is three places i.e. milliseconds. (Is this still true of the most modern flavours of Windows - citation needed).

As might be expected, the documentation covers this. Find out more.

"when you create timestamp(9) this gives you nanos right"

Only if the OS supports it. As you can see, my OEL appliance does not:

SQL> alter table t23 add ts_nano timestamp(9)
  2  /

Table altered.

SQL> update t23 set ts_nano = systimestamp(9)
  2  /

1 row updated.

SQL> select * from t23
  2  /

TS0
---------------------------------------------------------------------------
TS3
---------------------------------------------------------------------------
TS6
---------------------------------------------------------------------------
TS_DEF
---------------------------------------------------------------------------
TS_NANO
---------------------------------------------------------------------------
24-JAN-12 05.57.12 AM
24-JAN-12 05.57.12.003 AM
24-JAN-12 05.57.12.002648 AM
24-JAN-12 05.59.27.293305 AM
24-JAN-12 08.28.03.990557000 AM


SQL> 

(Those trailing zeroes could be a coincidence but they aren't.)

Using reduce, you can do this in one Array.prototype function. This will fetch all even numbers from an array.

var arr = [1,2,3,4,5,6,7,8];_x000D_
_x000D_
var brr = arr.reduce((c, n) => {_x000D_
  if (n % 2 !== 0) {_x000D_
    return c;_x000D_
  }_x000D_
  c.push(n);_x000D_
  return c;_x000D_
}, []);_x000D_
_x000D_
document.getElementById('mypre').innerHTML = brr.toString();

<h1>Get all even numbers</h1>_x000D_
<pre id="mypre"> </pre>

You can use the same method and generalize it for your objects, like this.

var arr = options.reduce(function(c,n){
  if(somecondition) {return c;}
  c.push(n);
  return c;
}, []);

arr will now contain the filtered objects.

If you just want the last date for each account, you'd use this:

var q = from n in table
        group n by n.AccountId into g
        select new {AccountId = g.Key, Date = g.Max(t=>t.Date)};

If you want the whole record:

var q = from n in table
        group n by n.AccountId into g
        select g.OrderByDescending(t=>t.Date).FirstOrDefault();

Refering to ?: Operator (C# Reference)

The conditional operator (?:) returns one of two values depending on the value of a Boolean expression. Following is the syntax for the conditional operator.

Refering to ?? Operator (C# Reference)

The ?? operator is called the null-coalescing operator and is used to define a default value for a nullable value types as well as reference types. It returns the left-hand operand if it is not null; otherwise it returns the right operand.

That means:

[Part 1]

return source ?? String.Empty;

[Part 2] is not applicable ...

This should technically be achievable using window.location.reload():

HTML:

<button (click)="refresh()">Refresh</button>

TS:

refresh(): void {
    window.location.reload();
}

Update:

Here is a basic StackBlitz example showing the refresh in action. Notice the URL on "/hello" path is retained when window.location.reload() is executed.

You can only have one return value whereas you can have multiple out parameters.

You only need to consider out parameters in those cases.

However, if you need to return more than one parameter from your method, you probably want to look at what you're returning from an OO approach and consider if you're better off return an object or a struct with these parameters. Therefore you're back to a return value again.

I had the same problem like you. Here's my error code.

@Component
public class GetExprsAndEnvId {
    @Value("hello")
    private String Mysecret;


    public GetExprsAndEnvId() {
        System.out.println("construct");
    }


    public void print(){
        System.out.println(this.Mysecret);
    }


    public String getMysecret() {
        return Mysecret;
    }

    public void setMysecret(String mysecret) {
        Mysecret = mysecret;
    }
}

This is no problem like this, but we need to use it like this:

@Autowired
private GetExprsAndEnvId getExprsAndEnvId;

not like this:

getExprsAndEnvId = new GetExprsAndEnvId();

Here, the field annotated with @Value is null because Spring doesn't know about the copy of GetExprsAndEnvId that is created with new and didn't know to how to inject values in it.

If you want to make them a lot bigger, like for multiple lines of input, you may want to use a textarea tag instead of the input tag. This allows you to put in number of rows and columns you want on your textarea without messing with css (e.g. <textarea rows="2" cols="25"></textarea>).

Text areas are resizable by default. If you want to disable that, just use the resize css rule:

#signin textarea {
    resize: none;
}

A simple solution to your question about default text that disappears when the user clicks is to use the placeholder attribute. This will work for <input> tags as well.

<textarea rows="2" cols="25" placeholder="This is the default text"></textarea>

This text will disappear when the user enters information rather than when they click, but that is common functionality for this kind of thing.

System.Environment has WorkingSet- a 64-bit signed integer containing the number of bytes of physical memory mapped to the process context.

If you want a lot of details there is System.Diagnostics.PerformanceCounter, but it will be a bit more effort to setup.

As an alternative to the other answers, you can also use this code if you want to return an IActionResult within an ASP.NET controller.

ASP.NET

 return Content(HttpStatusCode.Unauthorized, "My error message");

Update: ASP.NET Core

Above code does not work in ASP.NET Core, you can use one of these instead:

 return StatusCode((int)System.Net.HttpStatusCode.Unauthorized, "My error message");
 return StatusCode(Microsoft.AspNetCore.Http.StatusCodes.Status401Unauthorized, "My error message");
 return StatusCode(401, "My error message");

Apparently the reason phrase is pretty optional (Can an HTTP response omit the Reason-Phrase?)

It appears that in PHP you are obtaining the value of the submit button, not the select input. If you are using GET you will want to use $_GET['website_string'] or POST would be $_POST['website_string'].

You will probably want the following HTML:

<select name="website_string">
  <option value="" selected="selected"></option>
  <option value="abc">ABC</option>
  <option value="def">def</option>
  <option value="hij">hij</option>   
</select>
<input type="submit" />

With some PHP that looks like this:

<?php

$website_string = $_POST['website_string']; // or $_GET['website_string'];

?>

 # sed script to change "foo" to "bar" only on the first occurrence
 1{x;s/^/first/;x;}
 1,/foo/{x;/first/s///;x;s/foo/bar/;}
 #---end of script---

or, if you prefer: ^{Editor's note: works with GNU sed only.}

sed '0,/foo/s//bar/' file 

Source

The ist and 2nd answer are good but if anybody is looking for having a script or If you want dynamic i.e (db/username/password in variable) then here:

#!/bin/bash



DB="mydb"
USER="user1"
PASS="pass_bla"

mysql -uroot -prootpassword -e "CREATE DATABASE $DB CHARACTER SET utf8 COLLATE utf8_general_ci";
mysql -uroot -prootpassword -e "CREATE USER $USER@'127.0.0.1' IDENTIFIED BY '$PASS'";
mysql -uroot -prootpassword -e "GRANT SELECT, INSERT, UPDATE ON $DB.* TO '$USER'@'127.0.0.1'";

In case anyone is still looking for this, this solved the problem for us:

To whoever this may help, this saved my life...

IIS 7 was difficult for figuring out why i was getting the 401 - Unauthorized: Access is denied due to invalid credentials... until i did this...

1. Open IIS and select the website that is causing the 401
2. Open the "Authentication" property under the "IIS" header
3. Click the "Windows Authentication" item and click "Providers"
4. For me the issue was that Negotiate was above NTLM. I assume that there was some kind of handshake going on behind the scenes, but i was never really authenticated. I moved the NTLM to the top most spot, and BAM that fixed it.

Here is the link where this was found.

try using javascript for this! Seems like its the best and easiest way to do this. You'll get inbuilt funcn to execute a html code only after HTML page loads completely.

or else you may use state based programming where an event occurs at a particular state of the browser..

A straightforward approach would be the following:

string[] tokens = str.Split(' ');
string retVal = tokens[0] + " " + tokens[1];

Using google closure:

you can just use the ccsom module:

goog.require('goog.cssom');
var css_node = goog.cssom.addCssText('.cssClass { color: #F00; }');

The javascript code attempts to be cross browser when putting the css node into the document head.

There is a subtle difference in terms of conflict management. In case of conflicts, a pull request in Github will result in a merge commit on the destination branch. In Gitlab, when a conflict is found, the modifications made will be on a merge commit on the source branch.

See https://docs.gitlab.com/ee/user/project/merge_requests/resolve_conflicts.html

"GitLab resolves conflicts by creating a merge commit in the source branch that is not automatically merged into the target branch. This allows the merge commit to be reviewed and tested before the changes are merged, preventing unintended changes entering the target branch without review or breaking the build."

Personally, I prefer to use empty collections instead of null and have the algorithms work in a way that for the algorithm it does not matter if the collection is empty or not.

$() is the jQuery constructor function.

this is a reference to the DOM element of invocation.

So basically, in $(this), you are just passing the this in $() as a parameter so that you could call jQuery methods and functions.

put a int infront of the all the voxelCoord's...Like this below :

patch = numpyImage [int(voxelCoord[0]),int(voxelCoord[1])- int(voxelWidth/2):int(voxelCoord[1])+int(voxelWidth/2),int(voxelCoord[2])-int(voxelWidth/2):int(voxelCoord[2])+int(voxelWidth/2)]

ord and chr

Use column selection. Column selection is one of the unique features of Sublime2; it is used to give you multiple matched cursors (tutorial here). To get multiple cursors, do one of the following:

Mouse:

• Hold down the shift (Windows/Linux) or option key (Mac) while selecting a region with the mouse.

• Clicking middle mouse button (or scroll) will select as a column also.

Keyboard:

• Select the desired region.
• Type control+shift+L (Windows/Linux) or command+shift+L (Mac)

You now have multiple lines selected, so you could type a quotation mark at the beginning and end of each line. It would be better to take advantage of Sublime's capabilities, and just type ". When you do this, Sublime automatically quotes the selected text.

Type esc to exit multiple cursor mode.

If the object implements IDisposable, then yes, you should dispose it. The object could be hanging on to native resources (file handles, OS objects) that might not be freed immediately otherwise. This can lead to resource starvation, file-locking issues, and other subtle bugs that could otherwise be avoided.

See also Implementing a Dispose Method on MSDN.

You should explore SQL Server\Memory Manager performance counters.

it was your permalinks... you must have changed to labeled-name... switch back to default.

that worked for me.

You also need the change post-max-size.

Take a look at Enumerable#each_slice:

foo.each_slice(3).to_a
#=> [["1", "2", "3"], ["4", "5", "6"], ["7", "8", "9"], ["10"]]

If you create a dialog providing id's for the buttons,

$("#dialog").dialog({ buttons: [ {
 id: "dialogSave",
 text: "Save",
 click: function() { $(this).dialog("close"); }
},
{
 id: "dialogCancel",
 text: "Cancel",
 click: function() { $(this).dialog("close"); 
}
}]});       

we can disable button with the following code:

$("#dialogSave").button("option", "disabled", true);

If the value contains non-numeric characters, you can convert the value to an integer as follows:

SELECT CASE WHEN <column>~E'^\\d+$' THEN CAST (<column> AS INTEGER) ELSE 0 END FROM table;

The CASE operator checks the < column>, if it matches the integer pattern, it converts the rate into an integer, otherwise it returns 0

I think what you are looking for is:

startDate.setDate(startDate.getDate() + 1);

Also, you can have a look at Moment.js

A javascript date library for parsing, validating, manipulating, and formatting dates.

Meder Omuraliev suggested to use an event handler and set scrollTo(0,0). This is an example for Wassim-azirar. Bringing it all together, I assume this is the final solution.

We have 3 problems: the scrollbar, scrolling with mouse, and keyboard. This hides the scrollbar:

       html, body{overflow:hidden;}

Unfortunally, you can still scroll with the keyboard: To prevent this, we can:

    function keydownHandler(e) {
var evt = e ? e:event;
  var keyCode = evt.keyCode;

  if (keyCode==38 || keyCode==39 || keyCode==40 || keyCode==37){ //arrow keys
e.preventDefault()
scrollTo(0,0);
}
}

document.onkeydown=keydownHandler;

The scrolling with the mouse just naturally doesn't work after this code, so we have prevented the scrolling.

For example: https://jsfiddle.net/aL7pes70/1/

No built-in method. But you can implement one easily:

public static int getIndexOf(String[] strings, String item) {
    for (int i = 0; i < strings.length; i++) {
        if (item.equals(strings[i])) return i;
    }
    return -1;
}

SELECT table1.col_a, table1.col_b, table2.col_c 
  FROM table1 
  INNER JOIN table2 ON table1.col_a = table2.col_a

Here is a rough explanation of the concepts.

[ACK] is the acknowledgement that the previously sent data packet was received.

[FIN] is sent by a host when it wants to terminate the connection; the TCP protocol requires both endpoints to send the termination request (i.e. FIN).

So, suppose

• host A sends a data packet to host B
• and then host B wants to close the connection.
• Host B (depending on timing) can respond with [FIN,ACK] indicating that it received the sent packet and wants to close the session.
• Host A should then respond with a [FIN,ACK] indicating that it received the termination request (the ACK part) and that it too will close the connection (the FIN part).

However, if host A wants to close the session after sending the packet, it would only send a [FIN] packet (nothing to acknowledge) but host B would respond with [FIN,ACK] (acknowledges the request and responds with FIN).

Finally, some TCP stacks perform half-duplex termination, meaning that they can send [RST] instead of the usual [FIN,ACK]. This happens when the host actively closes the session without processing all the data that was sent to it. Linux is one operating system which does just this.

You can find a more detailed and comprehensive explanation here.

I'm not sure what you mean by a string that contains binary numbers. But for reversing a string (or any STL-compatible container), you can use std::reverse(). std::reverse() operates in place, so you may want to make a copy of the string first:

#include <algorithm>
#include <iostream>
#include <string>

int main()
{
    std::string foo("foo");
    std::string copy(foo);
    std::cout << foo << '\n' << copy << '\n';

    std::reverse(copy.begin(), copy.end());
    std::cout << foo << '\n' << copy << '\n';
}

There are two types of site-packages directories, global and per user.

1. Global site-packages ("dist-packages") directories are listed in sys.path when you run:

   python -m site
   

   For a more concise list run getsitepackages from the site module in Python code:

   python -c 'import site; print(site.getsitepackages())'
   

   Note: With virtualenvs getsitepackages is not available, sys.path from above will list the virtualenv's site-packages directory correctly, though. In Python 3, you may use the sysconfig module instead:

   python3 -c 'import sysconfig; print(sysconfig.get_paths()["purelib"])'
   

2. The per user site-packages directory (PEP 370) is where Python installs your local packages:

   python -m site --user-site
   

   If this points to a non-existing directory check the exit status of Python and see python -m site --help for explanations.

   Hint: Running pip list --user or pip freeze --user gives you a list of all installed per user site-packages.

Practical Tips

• <package>.__path__ lets you identify the location(s) of a specific package: (details)

  $ python -c "import setuptools as _; print(_.__path__)"
  ['/usr/lib/python2.7/dist-packages/setuptools']
  

• <module>.__file__ lets you identify the location of a specific module: (difference)

  $ python3 -c "import os as _; print(_.__file__)"
  /usr/lib/python3.6/os.py
  

• Run pip show <package> to show Debian-style package information:

  $ pip show pytest
  Name: pytest
  Version: 3.8.2
  Summary: pytest: simple powerful testing with Python
  Home-page: https://docs.pytest.org/en/latest/
  Author: Holger Krekel, Bruno Oliveira, Ronny Pfannschmidt, Floris Bruynooghe, Brianna Laugher, Florian Bruhin and others
  Author-email: None
  License: MIT license
  Location: /home/peter/.local/lib/python3.4/site-packages
  Requires: more-itertools, atomicwrites, setuptools, attrs, pathlib2, six, py, pluggy
  

In ANSI SQL, double quotes quote object names (e.g. tables) which allows them to contain characters not otherwise permitted, or be the same as reserved words (Avoid this, really).

Single quotes are for strings.

However, MySQL is oblivious to the standard (unless its SQL_MODE is changed) and allows them to be used interchangably for strings.

Moreover, Sybase and Microsoft also use square brackets for identifier quoting.

So it's a bit vendor specific.

Other databases such as Postgres and IBM actually adhere to the ansi standard :)

This turned out to NOT be a bower problem, though it showed up for me with bower.

It seems to be a node-which problem. If a file is in the path, but has the setuid/setgid bit set, which will not find it.

Here is a files with the s bit set: (unix 'which' will find it with no problems).

ls -al /usr/local/bin -rwxrwsr-- 110 root nmt 5535636 Jul 17 2012 git

Here is a node-which attempt:

> which.sync('git')
Error: not found: git

I change the permissions (chomd 755 git). Now node-which can find it.

> which.sync('git')
'/usr/local/bin/git'

Hope this helps.

def reverse(text):
    a=""
    l=len(text)
    while(l>=1):
        a+=text[l-1]
        l-=1
    return a

i just concatenated the string a with highest indexes of text (which keeps on decrementing by 1 each loop).

Byte[] Content = new BinaryReader(file.InputStream).ReadBytes(file.ContentLength);

You can do this be using a new Subject too:

Typescript:

let subject = new Subject();

get_categories(...) {
   this.http.post(...).subscribe( 
      (response) => {
         this.total = response.json();
         subject.next();
      }
   ); 

   return subject; // can be subscribed as well 
}

get_categories(...).subscribe(
   (response) => {
     // ...
   }
);

I tried replacing value with Value and it worked out. It has set the value in input tag now.

@Html.TextBoxFor(model => model.Destination, new { id = "txtPlace", Value= "3" })

I am currently using hooks.
Something like this:

import React, { useEffect } from 'react'


const AppBase = ({ }) => {

    useEffect(() => {
        // set el height and width etc.
    }, [])

    return (
        <div className="wrapper">
            <Sidebar />
            <div className="inner-wrapper">
                <ActionBar title="Title Here" />
                <BalanceBar balance={balance} />
                <div className="app-content">
                    <List items={items} />
                </div>
            </div>
        </div>
    );
}

export default AppBase

You can make bar a function making it a method.

Foo.bar = function(passvariable){  };

As a property it would just be assigned a string, data type or boolean

Foo.bar = "a place";

Use a CSS media query @media together with the CSS viewport units vw and vh to adapt to the aspect ratio of the viewport. This has the benefit of updating other properties, like font-size, too.

This fiddle demonstrates the fixed aspect ratio for the div, and the text matching its scale exactly.

Initial size is based on full width:

div {
  width: 100vw; 
  height: calc(100vw * 9 / 16);

  font-size: 10vw;

  /* align center */
  margin: auto;
  position: absolute;
  top: 0px; right: 0px; bottom: 0px; left: 0px;

  /* visual indicators */
  background:
    url(data:image/gif;base64,R0lGODlhAgAUAIABAB1ziv///yH5BAEAAAEALAAAAAACABQAAAIHhI+pa+EPCwA7) repeat-y center top,
    url(data:image/gif;base64,R0lGODlhFAACAIABAIodZP///yH5BAEAAAEALAAAAAAUAAIAAAIIhI8Zu+nIVgEAOw==) repeat-x left center,
    silver;
}

Then, when the viewport is wider than the desired aspect ratio, switch to height as base measure:

/* 100 * 16/9 = 177.778 */
@media (min-width: 177.778vh) {
  div {
    height: 100vh;
    width: calc(100vh * 16 / 9);

    font-size: calc(10vh * 16 / 9);
  }
}

This is very similar in vein to the max-width and max-height approach by @Danield, just more flexible.

I instinctively read it as "different from". "!=" hits me milliseconds after.

overflow: scroll;
-webkit-overflow-scrolling: touch;

On container you can set bounce effect inside element

Source: http://www.kylejlarson.com/blog/2011/fixed-elements-and-scrolling-divs-in-ios-5/

Add clickListener on button like this

    btUpdate.setOnClickListener(onclickListener)

add this code in your activity

 val onclickListener: View.OnClickListener = View.OnClickListener { view ->
        when (view.id) {
            R.id.btUpdate -> updateData()


        }
    }

The provider is bundled with PowerShell>=6.0.

If all you need is a way to install a package from a file, just grab the .msi installer for the latest version from the github releases page, copy it over to the machine, install it and use it.

You are providing a string representation of a dict to the DataFrame constructor, and not a dict itself. So this is the reason you get that error.

So if you want to use your code, you could do:

df = DataFrame(eval(data))

But better would be to not create the string in the first place, but directly putting it in a dict. Something roughly like:

data = []
for row in result_set:
    data.append({'value': row["tag_expression"], 'key': row["tag_name"]})

But probably even this is not needed, as depending on what is exactly in your result_set you could probably:

• provide this directly to a DataFrame: DataFrame(result_set)
• or use the pandas read_sql_query function to do this for you (see docs on this)

right-click on the project > Properties > Java Editor > Save Actions

If you are add more than argument ya dropdownlist in Asp.Net MVC. When you Edit record or pass value in view bag.

Use this it will be work:-

@Html.DropDownList("CurrencyID",null,String.Empty, new { @class = "form-control-mandatory" })

If you mean "web service" in SOAP/WSDL sense, you might want to look at Generating a WSDL using Python and SOAPpy

The % operator is for integers. You're looking for the fmod() function.

#include <cmath>

int main()
{
    double x = 6.3;
    double y = 2.0;
    double z = std::fmod(x,y);

}

$("#foo > div") 

selects all divs that are immediate descendants of #foo
once you have the set of children you can either use the size function:

$("#foo > div").size()

or you can use

$("#foo > div").length

Both will return you the same result

You must place the label after a caption in order to for label to store the table's number, not the chapter's number.

\begin{table}
\begin{tabular}{| p{5cm} | p{5cm} | p{5cm} |}
  -- cut --
\end{tabular}
\caption{My table}
\label{table:kysymys}
\end{table}

Table \ref{table:kysymys} on page \pageref{table:kysymys} refers to the ...

A form action set to a JavaScript function is not widely supported, I'm surprised it works in FireFox.

The best is to just set form action to your PHP script; if you need to do anything before submission you can just add to onsubmit

Edit turned out you didn't need any extra function, just a small change here:

function validateFormOnSubmit(theForm) {
    var reason = "";
    reason += validateName(theForm.name);
    reason += validatePhone(theForm.phone);
    reason += validateEmail(theForm.emaile);

    if (reason != "") {
        alert("Some fields need correction:\n" + reason);
    } else {
        simpleCart.checkout();
    }
    return false;
}

Then in your form:

<form action="#" onsubmit="return validateFormOnSubmit(this);">

Well, as most of the answers pointed out, you can include the jQuery file locally as well as use Google's CDN/Microsoft CDN servers. On choosing Google vs. Microsoft CDN go Google_CDN vs. Microsoft_CDN depending on your requirement.

Generally for intranet applications include jQuery file locally and never use the CDN method since for intranet, the LAN is 10x times faster than Internet. For Internet and public facing applications use a hybrid approach as suggested by cowgod elsewhere. Also don't forget to use the nice tool JS_Compressor to compress the extra JavaScript code you add to your jQuery library. It makes JavaScript really fast.

In short "How do I remove from a map while iterating it?"

• With old map impl: You can't
• With new map impl: almost as @KerrekSB suggested. But there are some syntax issues in what he posted.

From GCC map impl (note GXX_EXPERIMENTAL_CXX0X):

#ifdef __GXX_EXPERIMENTAL_CXX0X__
      // _GLIBCXX_RESOLVE_LIB_DEFECTS
      // DR 130. Associative erase should return an iterator.
      /**
       *  @brief Erases an element from a %map.
       *  @param  position  An iterator pointing to the element to be erased.
       *  @return An iterator pointing to the element immediately following
       *          @a position prior to the element being erased. If no such 
       *          element exists, end() is returned.
       *
       *  This function erases an element, pointed to by the given
       *  iterator, from a %map.  Note that this function only erases
       *  the element, and that if the element is itself a pointer,
       *  the pointed-to memory is not touched in any way.  Managing
       *  the pointer is the user's responsibility.
       */
      iterator
      erase(iterator __position)
      { return _M_t.erase(__position); }
#else
      /**
       *  @brief Erases an element from a %map.
       *  @param  position  An iterator pointing to the element to be erased.
       *
       *  This function erases an element, pointed to by the given
       *  iterator, from a %map.  Note that this function only erases
       *  the element, and that if the element is itself a pointer,
       *  the pointed-to memory is not touched in any way.  Managing
       *  the pointer is the user's responsibility.
       */
      void
      erase(iterator __position)
      { _M_t.erase(__position); }
#endif

Example with old and new style:

#include <iostream>
#include <map>
#include <vector>
#include <algorithm>

using namespace std;
typedef map<int, int> t_myMap;
typedef vector<t_myMap::key_type>  t_myVec;

int main() {

    cout << "main() ENTRY" << endl;

    t_myMap mi;
    mi.insert(t_myMap::value_type(1,1));
    mi.insert(t_myMap::value_type(2,1));
    mi.insert(t_myMap::value_type(3,1));
    mi.insert(t_myMap::value_type(4,1));
    mi.insert(t_myMap::value_type(5,1));
    mi.insert(t_myMap::value_type(6,1));

    cout << "Init" << endl;
    for(t_myMap::const_iterator i = mi.begin(); i != mi.end(); i++)
        cout << '\t' << i->first << '-' << i->second << endl;

    t_myVec markedForDeath;

    for (t_myMap::const_iterator it = mi.begin(); it != mi.end() ; it++)
        if (it->first > 2 && it->first < 5)
            markedForDeath.push_back(it->first);

    for(size_t i = 0; i < markedForDeath.size(); i++)
        // old erase, returns void...
        mi.erase(markedForDeath[i]);

    cout << "after old style erase of 3 & 4.." << endl;
    for(t_myMap::const_iterator i = mi.begin(); i != mi.end(); i++)
        cout << '\t' << i->first << '-' << i->second << endl;

    for (auto it = mi.begin(); it != mi.end(); ) {
        if (it->first == 5)
            // new erase() that returns iter..
            it = mi.erase(it);
        else
            ++it;
    }

    cout << "after new style erase of 5" << endl;
    // new cend/cbegin and lambda..
    for_each(mi.cbegin(), mi.cend(), [](t_myMap::const_reference it){cout << '\t' << it.first << '-' << it.second << endl;});

    return 0;
}

prints:

main() ENTRY
Init
        1-1
        2-1
        3-1
        4-1
        5-1
        6-1
after old style erase of 3 & 4..
        1-1
        2-1
        5-1
        6-1
after new style erase of 5
        1-1
        2-1
        6-1

Process returned 0 (0x0)   execution time : 0.021 s
Press any key to continue.

You need to first cast the instance to any because Function's type definition does not have a name property.

class MyClass {
  getName() {
    return (<any>this).constructor.name;
    // OR return (this as any).constructor.name;
  }
}

// From outside the class:
var className = (<any>new MyClass()).constructor.name;
// OR var className = (new MyClass() as any).constructor.name;
console.log(className); // Should output "MyClass"

// From inside the class:
var instance = new MyClass();
console.log(instance.getName()); // Should output "MyClass"

Update:

With TypeScript 2.4 (and potentially earlier) the code can be even cleaner:

class MyClass {
  getName() {
    return this.constructor.name;
  }
}

// From outside the class:
var className = (new MyClass).constructor.name;
console.log(className); // Should output "MyClass"

// From inside the class:
var instance = new MyClass();
console.log(instance.getName()); // Should output "MyClass"

You can use ECMAScript 6 WeakMap or Map:

• WeakMaps are key/value maps in which keys are objects.

Map objects are simple key/value maps. Any value (both objects and primitive values) may be used as either a key or a value.

Be aware that neither is widely supported, but you can use ECMAScript 6 Shim (requires native ECMAScript 5 or ECMAScript 5 Shim) to support Map, but not WeakMap (see why).

For converting any Jupyter notebook to PDF, please follow the below instructions:

(Be inside Jupyter notebook):

On Mac OS:

command + P --> you will get a print dialog box --> change destination as PDF --> Click print

On Windows:

Ctrl + P --> you will get a print dialog box --> change destination as PDF --> Click print

If the above steps doesn't generate full PDF of the Jupyter notebook (probably because Chrome, some times, don't print all the outputs because Jupyter make a scroll for big outputs),

Try performing below steps for removing the auto scroll in the menu:-

Credits: @ÂngeloPolotto

1. In your Jupyter Notebook, click Cell on top of the jupyter notebook

2. Next click All output --> Toggle scrolling for removing auto scroll.

Maybe too many years late, but nevertheless a theory to try.

The ratio of bounding rectangle of red logo region to the overall dimension of the bottle/can is different. In the case of Can, should be 1:1, whereas will be different in that of bottle (with or without cap). This should make it easy to distinguish between the two.

Update: The horizontal curvature of the logo region will be different between the Can and Bottle due their respective size difference. This could be specifically useful if your robot needs to pick up can/bottle, and you decide the grip accordingly.

Yes, but you'll need to run it at the database level.

Right-click the database in SSMS, select "Tasks", "Generate Scripts...". As you work through, you'll get to a "Scripting Options" section. Click on "Advanced", and in the list that pops up, where it says "Types of data to script", you've got the option to select Data and/or Schema.

echo $a | grep -bo cat | sed 's/:.*$//'

Here i have found some useful link, with live working example.

I have tried its working fine.

How to prevent Right Click option using jquery

$(document).bind("contextmenu", function (e) {
        e.preventDefault();
        alert("Right Click is Disabled");
    });

You'll have to check conflicting css files/properties for example you could have ".nav" custom style contents elsewhere try to disable your own css files and check if that works then check which file or custom style that makes the conflicts also make sure you are including the bootstrap.min.js in your code

The only one reason why you get some error like that, it's because your node version is not compatible with your node-sass version.

So, make sure to checkout the documentation at here: https://www.npmjs.com/package/node-sass

Or this image below will be help you, what the node version can use the node-sass version.

For an example, if you're using node version 12 on your windows ("maybe"), then you should have to install the node-sass version 4.12.

npm install [email protected]

Yeah, like that. So now you only need to install the node-sass version recommended by the node-sass team with the nodes installed on your computer.

Look at the following example code:

public class MyWorker
{
    public SharedData state;
    public void DoWork(SharedData someData)
    {
        this.state = someData;
        while (true) ;
    }

}

public class SharedData {
    X myX;
    public getX() { etc
    public setX(anX) { etc

}

public class Program
{
    public static void Main()
    {
        SharedData data = new SharedDate()
        MyWorker work1 = new MyWorker(data);
        MyWorker work2 = new MyWorker(data);
        Thread thread = new Thread(new ThreadStart(work1.DoWork));
        thread.Start();
        Thread thread2 = new Thread(new ThreadStart(work2.DoWork));
        thread2.Start();
    }
}

In this case, the thread class MyWorker has a variable state. We initialise it with the same object. Now you can see that the two workers access the same SharedData object. Changes made by one worker are visible to the other.

You have quite a few remaining issues. How does worker 2 know when changes have been made by worker 1 and vice-versa? How do you prevent conflicting changes? Maybe read: this tutorial.

Create two tables one after other, put second table in a div of fixed height and set the overflow property to auto. Also keep all the td's inside thead in second table empty.

<div>
    <table>
        <thead>
            <tr>
                <th>Head 1</th>
                <th>Head 2</th>
                <th>Head 3</th>
                <th>Head 4</th>
                <th>Head 5</th>
            </tr>
        </thead>
    </table>
</div>

<div style="max-height:500px;overflow:auto;">
    <table>
        <thead>
            <tr>
                <th></th>
                <th></th>
                <th></th>
                <th></th>
                <th></th>
            </tr>
        </thead>
        <tbody>
        <tr>
            <td>Content 1</td>
            <td>Content 2</td>
            <td>Content 3</td>
            <td>Content 4</td>
            <td>Content 5</td>
        </tr>
        </tbody>
    </table>    
</div>

int lcm = 1;
int y = 0;
boolean flag = false;
for(int i=2;i<=n;i++){
            if(lcm%i!=0){
                for(int j=i-1;j>1;j--){
                    if(i%j==0){
                        flag =true;
                        y = j;
                        break;
                    }
                }
                if(flag){
                    lcm = lcm*i/y;
                }
                else{
                    lcm = lcm*i;
                }
            }
            flag = false;
        }

here, first for loop is for getting every numbers starting from '2'. then if statement check whether the number(i) divides lcm if it does then it skip that no. and if it doesn't then next for loop is for finding a no. which can divides the number(i) if this happens we don't need that no. we only wants its extra factor. so here if the flag is true this means there already had some factors of no. 'i' in lcm. so we divide that factors and multiply the extra factor to lcm. If the number isn't divisible by any of its previous no. then when simply multiply it to the lcm.

Have implemented @Micah 's solution to generate a trendline with a few changes and thought I'd share:

• Coded as a function
• Option for a polynomial trendline (input order=2)
• Function can also just return the coefficient of determination (R^2, input Rval=True)
• More Numpy array optimisations

Code:

def trendline(xd, yd, order=1, c='r', alpha=1, Rval=False):
    """Make a line of best fit"""

    #Calculate trendline
    coeffs = np.polyfit(xd, yd, order)

    intercept = coeffs[-1]
    slope = coeffs[-2]
    power = coeffs[0] if order == 2 else 0

    minxd = np.min(xd)
    maxxd = np.max(xd)

    xl = np.array([minxd, maxxd])
    yl = power * xl ** 2 + slope * xl + intercept

    #Plot trendline
    plt.plot(xl, yl, c, alpha=alpha)

    #Calculate R Squared
    p = np.poly1d(coeffs)

    ybar = np.sum(yd) / len(yd)
    ssreg = np.sum((p(xd) - ybar) ** 2)
    sstot = np.sum((yd - ybar) ** 2)
    Rsqr = ssreg / sstot

    if not Rval:
        #Plot R^2 value
        plt.text(0.8 * maxxd + 0.2 * minxd, 0.8 * np.max(yd) + 0.2 * np.min(yd),
                 '$R^2 = %0.2f$' % Rsqr)
    else:
        #Return the R^2 value:
        return Rsqr

The error Event the onerror handler receives is a simple event not containing such information:

If the user agent was required to fail the WebSocket connection or the WebSocket connection is closed with prejudice, fire a simple event named error at the WebSocket object.

You may have better luck listening for the close event, which is a CloseEvent and indeed has a CloseEvent.code property containing a numerical code according to RFC 6455 11.7 and a CloseEvent.reason string property.

Please note however, that CloseEvent.code (and CloseEvent.reason) are limited in such a way that network probing and other security issues are avoided.

I was using Visual Studio Code in Mac and was trying to run the flutter code on my iPhone. The device was not showing up in the status bar. I fixed the issue by doing this in the Terminal:

rm -rf <flutter_repo_directory>/bin/cache
flutter doctor -v

This will basically clear all the cache data from the Flutter repository folder. So when you run flutter doctor it will download some files initially

Use prop() for updating the hidden property, and change() for handling the change event.

$('#check').change(function() {_x000D_
  $("#delete").prop("hidden", !this.checked);_x000D_
})

<script src="https://ajax.googleapis.com/ajax/libs/jquery/1.11.1/jquery.min.js"></script>_x000D_
<table>_x000D_
  <tr>_x000D_
    <td>_x000D_
      <input id="check" type="checkbox" name="del_attachment_id[]" value="<?php echo $attachment['link'];?>">_x000D_
    </td>_x000D_
_x000D_
    <td id="delete" hidden="true">_x000D_
      the file will be deleted from the newsletter_x000D_
    </td>_x000D_
  </tr>_x000D_
</table>

Note that if the user may be in multiple zones used in the query, you may probably want to add .distinct(). Otherwise you get one user multiple times:

users_in_zones = User.objects.filter(zones__in=[zone1, zone2, zone3]).distinct()

Humm, what? ssh is not something built in to Windows like in most *nix cases.

You'd probably want to use Putty to begin with. And: http://kb.siteground.com/how_to_generate_an_ssh_key_on_windows_using_putty/

To control the location of the title you may want to set a custom font as explained here (by twaddington): Link

Then to relocate the position of the text, in updateMeasureState() you would add p.baselineShift += (int) (p.ascent() * R); Similarly in updateDrawState() add tp.baselineShift += (int) (tp.ascent() * R); Where R is double between -1 and 1.

If you can get SSH to it you can an SSH Port-forwarded SVN server.

Use SSHs -L ( or -R , I forget, it always confuses me ) to make an ssh tunnel so that

127.0.0.1:3690 is really connecting to remote:3690 over the ssh tunnel, and then you can use it via

svn co svn://127.0.0.1/....

To do this I have an easy solution that works for me.

1. Create a new database with the new collation.
2. Export the data of the original data base in script mode.
3. Import the content to the new database using the script (rename the USE sentence to the new database).

However, you need to exercise caution if your database has triggers, procedures or similar - more that just data and tables.

All of the answers here are using window height, which is affected by the URL bar. Has everyone forgotten about screen height?

Here's my jQuery solution:

$(function(){

  var $w = $(window),
      $background = $('#background');

  // Fix background image jump on mobile
  if ((/Android|iPhone|iPad|iPod|BlackBerry/i).test(navigator.userAgent || navigator.vendor || window.opera)) {
    $background.css({'top': 'auto', 'bottom': 0});

    $w.resize(sizeBackground);
    sizeBackground();
  }

  function sizeBackground() {
     $background.height(screen.height);
  }
});

Adding the .css() part is changing the inevitably top-aligned absolute positioned element to bottom aligned, so there is no jump at all. Although, I suppose there's no reason not to just add that directly to the normal CSS.

We need the user agent sniffer because screen height on desktops would not be helpful.

Also, this is all assuming #background is a fixed-position element filling the window.

For the JavaScript purists (warning--untested):

var background = document.getElementById('background');

// Fix background image jump on mobile
if ((/Android|iPhone|iPad|iPod|BlackBerry/i).test(navigator.userAgent || navigator.vendor || window.opera)) {
  background.style.top = 'auto';
  background.style.bottom = 0;

  window.onresize = sizeBackground;
  sizeBackground();
}

function sizeBackground() {
  background.style.height = screen.height;
}

EDIT: Sorry that this does not directly answer your specific problem with more than one background. But this is one of the first results when searching for this problem of fixed backgrounds jumping on mobile.

You have a big misunderstanding of how the web works.

Basically, things happen this way:

• User (well, the browser) requests test.php from your server
• On the server, test.php runs, everything inside is executed, and a resulting HTML page (which includes your form) will be sent back to browser
• The browser displays the form, the user can interact with it.
• The user submits the form (to the URL defined in action, which is the same file in this case), so everything starts from the beginning (except the data in the form will also be sent). New request to the server, PHP runs, etc. That means the page will be refreshed.

You were trying to invoke test() from your onclick attribute. This technique is used to run a client-side script, which is in most cases Javascript (code will run on the user's browser). That has nothing to do with PHP, which is server-side, resides on your server and will only run if a request comes in. Please read Client-side Versus Server-side Coding for example.

If you want to do something without causing a page refresh, you have to use Javascript to send a request in the background to the server, let PHP do what it needs to do, and receive an answer from it. This technique is basically called AJAX, and you can find lots of great resources on it using Google (like Mozilla's amazing tutorial).

On Linux, you can use

date -d "-1 days" +"%a %d/%m/%Y"

Here is what I did recently in PHP on one of my bigger systems:

1. User inputs newsletter text and selects the recipients (which generates a query to retrieve the email addresses for later).

2. Add the newsletter text and recipients query to a row in mysql table called *email_queue*

   • (The table email_queue has the columns "to" "subject" "body" "priority")

3. I created another script, which runs every minute as a cron job. It uses the SwiftMailer class. This script simply:

   • during business hours, sends all email with priority == 0

   • after hours, send other emails by priority

Depending on the hosts settings, I can now have it throttle using standard swiftmailers plugins like antiflood and throttle...

$mailer->registerPlugin(new Swift_Plugins_AntiFloodPlugin(50, 30));

and

$mailer->registerPlugin(new Swift_Plugins_ThrottlerPlugin( 100, Swift_Plugins_ThrottlerPlugin::MESSAGES_PER_MINUTE ));

etc, etc..

I have expanded it way beyond this pseudocode, with attachments, and many other configurable settings, but it works very well as long as your server is setup correctly to send email. (Probably wont work on shared hosting, but in theory it should...) Swiftmailer even has a setting

$message->setReturnPath

Which I now use to track bounces...

Happy Trails! (Happy Emails?)

Fedora/Cent Os same trouble when used yum install and interrupt it with Ctrl+Z.

Use this command:

sudo cat /var/cache/dnf/*pid

if there any pid, you can manually remove it:

sudo nano /var/cache/dnf/*pid

crtl+x followed by Y and Enter to exit nano editor (you can use any editor you want to open).

If after, delete some tmp files that may still be there:

sudo systemd-tmpfiles --remove dnf.conf

I had some issues playing on Android Phone. After few tries I found out that when Data Saver is on there is no auto play:

There is no autoplay if Data Saver mode is enabled. If Data Saver mode is enabled, autoplay is disabled in Media settings.

Source

Note: As of 2015, all major browsers (including IE>=9) support String.prototype.trim(). This means that for most use cases simply doing str.trim() is the best way of achieving what the question asks.

Steven Levithan analyzed many different implementation of trim in Javascript in terms of performance.

His recommendation is:

function trim1 (str) {
    return str.replace(/^\s\s*/, '').replace(/\s\s*$/, '');
}

for "general-purpose implementation which is fast cross-browser", and

function trim11 (str) {
    str = str.replace(/^\s+/, '');
    for (var i = str.length - 1; i >= 0; i--) {
        if (/\S/.test(str.charAt(i))) {
            str = str.substring(0, i + 1);
            break;
        }
    }
    return str;
}

"if you want to handle long strings exceptionally fast in all browsers".

References

• blog.stevenlevithan.com -- Faster JavaScript Trim

well looking for a simpler variation I found this:

it's truly smart, and I guess you might want to add other browsers variations too although it worked for me both on Chrome and Firefox.

demo and credit => http://codepen.io/Ahrengot/pen/bKdLC

@keyframes fadeIn { _x000D_
  from { opacity: 0; } _x000D_
}_x000D_
_x000D_
.animate-flicker {_x000D_
    animation: fadeIn 1s infinite alternate;_x000D_
}

<h2 class="animate-flicker">Jump in the hole!</h2>

I personally would add a click handler to the child element that did nothing but stop the propagation of the click. So it would look something like:

$('.example > div').click(function (e) {
    e.stopPropagation();
});

Check this find code for Database use:

function numonly(root){
    >>var reet = root.value;
    var arr1 = reet.length;
    var ruut = reet.charAt(arr1-1);
    >>>if (reet.length > 0){
        var regex = /[0-9]|\./;
        if (!ruut.match(regex)){
            var reet = reet.slice(0, -1);
            $(root).val(reet);
        >>>>}
    }
}
//Then use the even handler onkeyup='numonly(this)'

/^0|[1-9]\d*$/

It Works , try out this :

InputStream in_s1 =   TopBrandData.class.getResourceAsStream("/assets/TopBrands.xml");

There is a much easier way to do without adding the CSS files and all the other methods suggested. But you have to do it every time you start the Jupiter notebook.

Go to inspect in your browser and click on the element selection icon and then click on the box. And at the bottom of the page, you will be seeing the styling option for CSS where you can easily change the font-size.

The accepted answer seems not work for me. My solution:

import time
utc_0 = int(time.mktime(datetime(1970, 01, 01).timetuple()))
def datetime2ts(dt):
    """Converts a datetime object to UTC timestamp"""
    return int(time.mktime(dt.utctimetuple())) - utc_0

You may have used built-in name 'list' for a variable in your code. If you are using Jupyter notebook, sometimes even if you change the name of that variable from 'list' to something different and rerun that cell, you may still get the error. In this case you need to restart the Kernal. In order to make sure that the name has change, click on the word 'list' when you are creating a list object and press Shift+Tab, and check if Docstring shows it as an empty list.

1. Windows firewall blocks the sql server. Even if you open the 1433 port from exceptions, in the client machine it sets the connection point to dynamic port. Add also the sql server to the exceptions.

"C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Binn\Sqlservr.exe"

More info

2. This page helped me to solve the problem. Especially

or if you feel brave, locate the alias in the registry and delete it there.

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSSQLServer\Client\ConnectTo\

A simple function (requires underscore.js) -- based off of @porneL answer

    String.prototype.shyBreakString = function(maxLength) {
        var shystring = [];
        _.each(this.split(' '), function(word){
            shystring.push(_.chop(word, maxLength).join('­'));
        });
        return shystring.join(' ');
    };

Are you sure you have a column DEPARTEMENT_CODE on your table PS_TBL_DEPARTMENT_DETAILS

More informations about your ERROR

ORA-00904: string: invalid identifier Cause: The column name entered is either missing or invalid. Action: Enter a valid column name. A valid column name must begin with a letter, be less than or equal to 30 characters, and consist of only alphanumeric characters and the special characters $, _, and #. If it contains other characters, then it must be enclosed in d double quotation marks. It may not be a reserved word.

Try WooCommerce Product Filter, plugin developed by Mihajlovicnenad.com. You can filter your products by any criteria. Also, it integrates with your Shop and archive pages perfectly. Here is a screenshot. And this is just one of the layouts, you can customize and make your own. Look at demo site. Thanks!

The easiest way is to click on the area left to the address bar and change location settings there. It allows to set location options even for file:///

Yes, I think hashing the file would be the best way if you have to compare several files and store hashes for later comparison. As hash can clash, a byte-by-byte comparison may be done depending on the use case.

Generally byte-by-byte comparison would be sufficient and efficient, which filecmp module already does + other things too.

See http://docs.python.org/library/filecmp.html e.g.

>>> import filecmp
>>> filecmp.cmp('file1.txt', 'file1.txt')
True
>>> filecmp.cmp('file1.txt', 'file2.txt')
False

Speed consideration: Usually if only two files have to be compared, hashing them and comparing them would be slower instead of simple byte-by-byte comparison if done efficiently. e.g. code below tries to time hash vs byte-by-byte

Disclaimer: this is not the best way of timing or comparing two algo. and there is need for improvements but it does give rough idea. If you think it should be improved do tell me I will change it.

import random
import string
import hashlib
import time

def getRandText(N):
    return  "".join([random.choice(string.printable) for i in xrange(N)])

N=1000000
randText1 = getRandText(N)
randText2 = getRandText(N)

def cmpHash(text1, text2):
    hash1 = hashlib.md5()
    hash1.update(text1)
    hash1 = hash1.hexdigest()

    hash2 = hashlib.md5()
    hash2.update(text2)
    hash2 = hash2.hexdigest()

    return  hash1 == hash2

def cmpByteByByte(text1, text2):
    return text1 == text2

for cmpFunc in (cmpHash, cmpByteByByte):
    st = time.time()
    for i in range(10):
        cmpFunc(randText1, randText2)
    print cmpFunc.func_name,time.time()-st

and the output is

cmpHash 0.234999895096
cmpByteByByte 0.0

Replace everything with the remote branch; but, only from the same commit your local branch is on:

git reset --hard origin/some-branch

OR, get the latest from the remote branch and replace everything:

git fetch origin some-branch
git reset --hard FETCH_HEAD

As an aside, if needed, you can wipe out untracked files & directories that you haven't committed yet:

git clean -fd

Shortened version of @AnttiHaapala:

json.dumps(dict_with_sets, default=lambda x: list(x) if isinstance(x, set) else x)

tl;dr

Use java.time.Instant class to parse text in standard ISO 8601 format, representing a moment in UTC.

Instant.parse( "2010-10-02T12:23:23Z" )

ISO 8601

That format is defined by the ISO 8601 standard for date-time string formats.

Both:

• java.time framework built into Java 8 and later (Tutorial)
• Joda-Time library

…use ISO 8601 formats by default for parsing and generating strings.

You should generally avoid using the old java.util.Date/.Calendar & java.text.SimpleDateFormat classes as they are notoriously troublesome, confusing, and flawed. If required for interoperating, you can convert to and fro.

java.time

Built into Java 8 and later is the new java.time framework. Inspired by Joda-Time, defined by JSR 310, and extended by the ThreeTen-Extra project.

Instant instant = Instant.parse( "2010-10-02T12:23:23Z" );  // `Instant` is always in UTC.

Convert to the old class.

java.util.Date date = java.util.Date.from( instant );  // Pass an `Instant` to the `from` method.

Time Zone

If needed, you can assign a time zone.

ZoneId zoneId = ZoneId.of( "America/Montreal" ); // Define a time zone rather than rely implicitly on JVM’s current default time zone.
ZonedDateTime zdt = ZonedDateTime.ofInstant( instant , zoneId );  // Assign a time zone adjustment from UTC.

Convert.

java.util.Date date = java.util.Date.from( zdt.toInstant() );  // Extract an `Instant` from the `ZonedDateTime` to pass to the `from` method.

Joda-Time

UPDATE: The Joda-Time project is now in maintenance mode. The team advises migration to the java.time classes.

Here is some example code in Joda-Time 2.8.

org.joda.time.DateTime dateTime_Utc = new DateTime( "2010-10-02T12:23:23Z" , DateTimeZone.UTC );  // Specifying a time zone to apply, rather than implicitly assigning the JVM’s current default.

Convert to old class. Note that the assigned time zone is lost in conversion, as j.u.Date cannot be assigned a time zone.

java.util.Date date = dateTime_Utc.toDate(); // The `toDate` method converts to old class.

Time Zone

If needed, you can assign a time zone.

DateTimeZone zone = DateTimeZone.forID( "America/Montreal" );
DateTime dateTime_Montreal = dateTime_Utc.withZone ( zone );

About java.time

The java.time framework is built into Java 8 and later. These classes supplant the troublesome old legacy date-time classes such as java.util.Date, Calendar, & SimpleDateFormat.

The Joda-Time project, now in maintenance mode, advises migration to the java.time classes.

To learn more, see the Oracle Tutorial. And search Stack Overflow for many examples and explanations. Specification is JSR 310.

You may exchange java.time objects directly with your database. Use a JDBC driver compliant with JDBC 4.2 or later. No need for strings, no need for java.sql.* classes.

Where to obtain the java.time classes?

• Java SE 8, Java SE 9, and later
  • Built-in.
  • Part of the standard Java API with a bundled implementation.
  • Java 9 adds some minor features and fixes.
• Java SE 6 and Java SE 7
  • Much of the java.time functionality is back-ported to Java 6 & 7 in ThreeTen-Backport.
• Android
  • Later versions of Android bundle implementations of the java.time classes.
  • For earlier Android (<26), the ThreeTenABP project adapts ThreeTen-Backport (mentioned above). See How to use ThreeTenABP….

The ThreeTen-Extra project extends java.time with additional classes. This project is a proving ground for possible future additions to java.time. You may find some useful classes here such as Interval, YearWeek, YearQuarter, and more.