The quantile()
function will do much of what you probably want, but since the question was ambiguous, I will provide an alternate answer that does something slightly different from quantile()
.
ecdf(infert$age)(infert$age)
will generate a vector of the same length as infert$age
giving the proportion of infert$age
that is below each observation. You can read the ecdf
documentation, but the basic idea is that ecdf()
will give you a function that returns the empirical cumulative distribution. Thus ecdf(X)(Y)
is the value of the cumulative distribution of X at the points in Y. If you wanted to know just the probability of being below 30 (thus what percentile 30 is in the sample), you could say
ecdf(infert$age)(30)
The main difference between this approach and using the quantile()
function is that quantile()
requires that you put in the probabilities to get out the levels, and this requires that you put in the levels to get out the probabilities.
In case you need the answer to be a member of the input numpy array:
Just to add that the percentile function in numpy by default calculates the output as a linear weighted average of the two neighboring entries in the input vector. In some cases people may want the returned percentile to be an actual element of the vector, in this case, from v1.9.0 onwards you can use the "interpolation" option, with either "lower", "higher" or "nearest".
import numpy as np
x=np.random.uniform(10,size=(1000))-5.0
np.percentile(x,70) # 70th percentile
2.075966046220879
np.percentile(x,70,interpolation="nearest")
2.0729677997904314
The latter is an actual entry in the vector, while the former is a linear interpolation of two vector entries that border the percentile
The opposite of the ==
compare operator is !=
.
I searched and searched and finally found that ie needs to know the map size. Set the map size to match the div size.
map = new GMap2(document.getElementById("map_canvas2"), { size: new GSize(850, 600) });
<div id="map_canvas2" style="width: 850px; height: 600px">
</div>
Lists of bytes are subscriptable (at least in Python 3.6). This way you can retrieve the decimal value of each byte individually.
>>> intlist = [64, 4, 26, 163, 255]
>>> bytelist = bytes(intlist) # b'@x04\x1a\xa3\xff'
>>> for b in bytelist:
... print(b) # 64 4 26 163 255
>>> [b for b in bytelist] # [64, 4, 26, 163, 255]
>>> bytelist[2] # 26
placeholder
attributeYou're looking for the placeholder
attribute. Use it like any other attribute inside your ASP.net control:
<asp:textbox id="txtWithHint" placeholder="hint" runat="server"/>
Don't bother about your IDE (i.e. Visual Studio) maybe not knowing the attribute. Attributes which are not registered with ASP.net are passed through and rendered as is. So the above code (basically) renders to:
<input type="text" placeholder="hint"/>
placeholder
in resourcesA fine way of applying the hint to the control is using resources. This way you may have localized hints. Let's say you have an index.aspx file, your App_LocalResources/index.aspx.resx file contains
<data name="WithHint.placeholder">
<value>hint</value>
</data>
and your control looks like
<asp:textbox id="txtWithHint" meta:resourcekey="WithHint" runat="server"/>
the rendered result will look the same as the one in the chapter above.
Like any other attribute you can add the placeholder
to the AttributeCollection
:
txtWithHint.Attributes.Add("placeholder", "hint");
When you set the Drawable of an ImageView by using the setBackgroundDrawable
method, the image will always be scaled. Parameters as adjustViewBounds
or different ScaleTypes
will just be ignored. The only solution to keep the aspect ratio I found, is to resize the ImageView
after loading your drawable. Here is the code snippet I used:
// bmp is your Bitmap object
int imgHeight = bmp.getHeight();
int imgWidth = bmp.getWidth();
int containerHeight = imageView.getHeight();
int containerWidth = imageView.getWidth();
boolean ch2cw = containerHeight > containerWidth;
float h2w = (float) imgHeight / (float) imgWidth;
float newContainerHeight, newContainerWidth;
if (h2w > 1) {
// height is greater than width
if (ch2cw) {
newContainerWidth = (float) containerWidth;
newContainerHeight = newContainerWidth * h2w;
} else {
newContainerHeight = (float) containerHeight;
newContainerWidth = newContainerHeight / h2w;
}
} else {
// width is greater than height
if (ch2cw) {
newContainerWidth = (float) containerWidth;
newContainerHeight = newContainerWidth / h2w;
} else {
newContainerWidth = (float) containerHeight;
newContainerHeight = newContainerWidth * h2w;
}
}
Bitmap copy = Bitmap.createScaledBitmap(bmp, (int) newContainerWidth, (int) newContainerHeight, false);
imageView.setBackgroundDrawable(new BitmapDrawable(copy));
LayoutParams params = new LayoutParams(LayoutParams.WRAP_CONTENT, LayoutParams.WRAP_CONTENT);
imageView.setLayoutParams(params);
imageView.setMaxHeight((int) newContainerHeight);
imageView.setMaxWidth((int) newContainerWidth);
In the code snippet above is bmp the Bitmap object that is to be shown and imageView is the ImageView
object
An important thing to note is the change of the layout parameters. This is necessary because setMaxHeight
and setMaxWidth
will only make a difference if the width and height are defined to wrap the content, not to fill the parent. Fill parent on the other hand is the desired setting at the beginning, because otherwise containerWidth
and containerHeight
will both have values equal to 0.
So, in your layout file you will have something like this for your ImageView:
...
<ImageView android:id="@+id/my_image_view"
android:layout_width="fill_parent"
android:layout_height="fill_parent"/>
...
A bit decent web application consists of a mix of design patterns. I'll mention only the most important ones.
The core (architectural) design pattern you'd like to use is the Model-View-Controller pattern. The Controller is to be represented by a Servlet which (in)directly creates/uses a specific Model and View based on the request. The Model is to be represented by Javabean classes. This is often further dividable in Business Model which contains the actions (behaviour) and Data Model which contains the data (information). The View is to be represented by JSP files which have direct access to the (Data) Model by EL (Expression Language).
Then, there are variations based on how actions and events are handled. The popular ones are:
Request (action) based MVC: this is the simplest to implement. The (Business) Model works directly with HttpServletRequest
and HttpServletResponse
objects. You have to gather, convert and validate the request parameters (mostly) yourself. The View can be represented by plain vanilla HTML/CSS/JS and it does not maintain state across requests. This is how among others Spring MVC, Struts and Stripes works.
Component based MVC: this is harder to implement. But you end up with a simpler model and view wherein all the "raw" Servlet API is abstracted completely away. You shouldn't have the need to gather, convert and validate the request parameters yourself. The Controller does this task and sets the gathered, converted and validated request parameters in the Model. All you need to do is to define action methods which works directly with the model properties. The View is represented by "components" in flavor of JSP taglibs or XML elements which in turn generates HTML/CSS/JS. The state of the View for the subsequent requests is maintained in the session. This is particularly helpful for server-side conversion, validation and value change events. This is how among others JSF, Wicket and Play! works.
As a side note, hobbying around with a homegrown MVC framework is a very nice learning exercise, and I do recommend it as long as you keep it for personal/private purposes. But once you go professional, then it's strongly recommended to pick an existing framework rather than reinventing your own. Learning an existing and well-developed framework takes in long term less time than developing and maintaining a robust framework yourself.
In the below detailed explanation I'll restrict myself to request based MVC since that's easier to implement.
First, the Controller part should implement the Front Controller pattern (which is a specialized kind of Mediator pattern). It should consist of only a single servlet which provides a centralized entry point of all requests. It should create the Model based on information available by the request, such as the pathinfo or servletpath, the method and/or specific parameters. The Business Model is called Action
in the below HttpServlet
example.
protected void service(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
try {
Action action = ActionFactory.getAction(request);
String view = action.execute(request, response);
if (view.equals(request.getPathInfo().substring(1)) {
request.getRequestDispatcher("/WEB-INF/" + view + ".jsp").forward(request, response);
}
else {
response.sendRedirect(view); // We'd like to fire redirect in case of a view change as result of the action (PRG pattern).
}
}
catch (Exception e) {
throw new ServletException("Executing action failed.", e);
}
}
Executing the action should return some identifier to locate the view. Simplest would be to use it as filename of the JSP. Map this servlet on a specific url-pattern
in web.xml
, e.g. /pages/*
, *.do
or even just *.html
.
In case of prefix-patterns as for example /pages/*
you could then invoke URL's like http://example.com/pages/register, http://example.com/pages/login, etc and provide /WEB-INF/register.jsp
, /WEB-INF/login.jsp
with the appropriate GET and POST actions. The parts register
, login
, etc are then available by request.getPathInfo()
as in above example.
When you're using suffix-patterns like *.do
, *.html
, etc, then you could then invoke URL's like http://example.com/register.do, http://example.com/login.do, etc and you should change the code examples in this answer (also the ActionFactory
) to extract the register
and login
parts by request.getServletPath()
instead.
The Action
should follow the Strategy pattern. It needs to be defined as an abstract/interface type which should do the work based on the passed-in arguments of the abstract method (this is the difference with the Command pattern, wherein the abstract/interface type should do the work based on the arguments which are been passed-in during the creation of the implementation).
public interface Action {
public String execute(HttpServletRequest request, HttpServletResponse response) throws Exception;
}
You may want to make the Exception
more specific with a custom exception like ActionException
. It's just a basic kickoff example, the rest is all up to you.
Here's an example of a LoginAction
which (as its name says) logs in the user. The User
itself is in turn a Data Model. The View is aware of the presence of the User
.
public class LoginAction implements Action {
public String execute(HttpServletRequest request, HttpServletResponse response) throws Exception {
String username = request.getParameter("username");
String password = request.getParameter("password");
User user = userDAO.find(username, password);
if (user != null) {
request.getSession().setAttribute("user", user); // Login user.
return "home"; // Redirect to home page.
}
else {
request.setAttribute("error", "Unknown username/password. Please retry."); // Store error message in request scope.
return "login"; // Go back to redisplay login form with error.
}
}
}
The ActionFactory
should follow the Factory method pattern. Basically, it should provide a creational method which returns a concrete implementation of an abstract/interface type. In this case, it should return an implementation of the Action
interface based on the information provided by the request. For example, the method and pathinfo (the pathinfo is the part after the context and servlet path in the request URL, excluding the query string).
public static Action getAction(HttpServletRequest request) {
return actions.get(request.getMethod() + request.getPathInfo());
}
The actions
in turn should be some static/applicationwide Map<String, Action>
which holds all known actions. It's up to you how to fill this map. Hardcoding:
actions.put("POST/register", new RegisterAction());
actions.put("POST/login", new LoginAction());
actions.put("GET/logout", new LogoutAction());
// ...
Or configurable based on a properties/XML configuration file in the classpath: (pseudo)
for (Entry entry : configuration) {
actions.put(entry.getKey(), Class.forName(entry.getValue()).newInstance());
}
Or dynamically based on a scan in the classpath for classes implementing a certain interface and/or annotation: (pseudo)
for (ClassFile classFile : classpath) {
if (classFile.isInstanceOf(Action.class)) {
actions.put(classFile.getAnnotation("mapping"), classFile.newInstance());
}
}
Keep in mind to create a "do nothing" Action
for the case there's no mapping. Let it for example return directly the request.getPathInfo().substring(1)
then.
Those were the important patterns so far.
To get a step further, you could use the Facade pattern to create a Context
class which in turn wraps the request and response objects and offers several convenience methods delegating to the request and response objects and pass that as argument into the Action#execute()
method instead. This adds an extra abstract layer to hide the raw Servlet API away. You should then basically end up with zero import javax.servlet.*
declarations in every Action
implementation. In JSF terms, this is what the FacesContext
and ExternalContext
classes are doing. You can find a concrete example in this answer.
Then there's the State pattern for the case that you'd like to add an extra abstraction layer to split the tasks of gathering the request parameters, converting them, validating them, updating the model values and execute the actions. In JSF terms, this is what the LifeCycle
is doing.
Then there's the Composite pattern for the case that you'd like to create a component based view which can be attached with the model and whose behaviour depends on the state of the request based lifecycle. In JSF terms, this is what the UIComponent
represent.
This way you can evolve bit by bit towards a component based framework.
A combination of previous 2 answers did the trick. Thanks. A new class which inherits from Button. Note: updateImages() should be called before showing the button.
import javafx.event.EventHandler;
import javafx.scene.control.Button;
import javafx.scene.image.Image;
import javafx.scene.image.ImageView;
import javafx.scene.input.MouseEvent;
public class ImageButton extends Button {
public void updateImages(final Image selected, final Image unselected) {
final ImageView iv = new ImageView(selected);
this.getChildren().add(iv);
iv.setOnMousePressed(new EventHandler<MouseEvent>() {
public void handle(MouseEvent evt) {
iv.setImage(unselected);
}
});
iv.setOnMouseReleased(new EventHandler<MouseEvent>() {
public void handle(MouseEvent evt) {
iv.setImage(selected);
}
});
super.setGraphic(iv);
}
}
@marknadal's solution wasn't grabbing hyphenated properties for me (e.g. max-width
), but changing the first for
loop in css2json()
made it work, and I suspect performs fewer iterations:
for (var i = 0; i < css.length; i += 1) {
s[css[i]] = css.getPropertyValue(css[i]);
}
Loops via length
rather than in,
retrieves via getPropertyValue()
rather than toLowerCase().
You need to use backtick instead of single quotes:
Single quote - 'Business Name'
- Wrong
Backtick - `Business Name`
- Correct
Cross-browser rotate for any element. Works in IE7 and IE8. In IE7 it looks like not working in JSFiddle but in my project worked also in IE7
var elementToRotate = $('#rotateMe');
var degreeOfRotation = 33;
var deg = degreeOfRotation;
var deg2radians = Math.PI * 2 / 360;
var rad = deg * deg2radians ;
var costheta = Math.cos(rad);
var sintheta = Math.sin(rad);
var m11 = costheta;
var m12 = -sintheta;
var m21 = sintheta;
var m22 = costheta;
var matrixValues = 'M11=' + m11 + ', M12='+ m12 +', M21='+ m21 +', M22='+ m22;
elementToRotate.css('-webkit-transform','rotate('+deg+'deg)')
.css('-moz-transform','rotate('+deg+'deg)')
.css('-ms-transform','rotate('+deg+'deg)')
.css('transform','rotate('+deg+'deg)')
.css('filter', 'progid:DXImageTransform.Microsoft.Matrix(sizingMethod=\'auto expand\','+matrixValues+')')
.css('-ms-filter', 'progid:DXImageTransform.Microsoft.Matrix(SizingMethod=\'auto expand\','+matrixValues+')');
Edit 13/09/13 15:00 Wrapped in a nice and easy, chainable, jquery plugin.
Example of use
$.fn.rotateElement = function(angle) {
var elementToRotate = this,
deg = angle,
deg2radians = Math.PI * 2 / 360,
rad = deg * deg2radians ,
costheta = Math.cos(rad),
sintheta = Math.sin(rad),
m11 = costheta,
m12 = -sintheta,
m21 = sintheta,
m22 = costheta,
matrixValues = 'M11=' + m11 + ', M12='+ m12 +', M21='+ m21 +', M22='+ m22;
elementToRotate.css('-webkit-transform','rotate('+deg+'deg)')
.css('-moz-transform','rotate('+deg+'deg)')
.css('-ms-transform','rotate('+deg+'deg)')
.css('transform','rotate('+deg+'deg)')
.css('filter', 'progid:DXImageTransform.Microsoft.Matrix(sizingMethod=\'auto expand\','+matrixValues+')')
.css('-ms-filter', 'progid:DXImageTransform.Microsoft.Matrix(SizingMethod=\'auto expand\','+matrixValues+')');
return elementToRotate;
}
$element.rotateElement(15);
JSFiddle: http://jsfiddle.net/RgX86/175/
Using dplyr 1.0.2 there are now two ways to do this, one is long hand and the other is using the verb across():
# create data
ID <- c(1,1,1,2,2,2,2,3,3)
Value <- c(2,3,5,2,5,8,17,3,5)
Event <- c(1,1,2,1,2,1,2,2,2)
group <- data.frame(Subject=ID, pt=Value, Event=Event)
Long hand the verb is max() but note the na.rm = TRUE which is useful for examples where there are NAs as in the closed question: Merge rows in a dataframe where the rows are disjoint and contain NAs:
group %>%
group_by(Subject) %>%
summarise(pt = max(pt, na.rm = TRUE),
Event = max(Event, na.rm = TRUE))
This is ok if there are only a few columns but if the table has many columns across() is useful. The examples for this verb are often with summarise(across(start_with... but in this example the columns don't start with the same characters. Either they could be changed or the positions listed:
group %>%
group_by(Subject) %>%
summarise(across(1:ncol(group)-1, max, na.rm = TRUE, .names = "{.col}"))
Note for the verb across() 1 refers to the first column after the first actual column so using ncol(group) won't work as that is too many columns (makes it position 4 rather than 3).
Very interesting question.
I don't see any difference w.r.t safety or versatility, since you can do the same thing with pointer or reference. I also don't think there is any visible difference in performance since references are implemented by pointers.
But I think using reference is better because it is consistent with the standard library. For example, chaining in iostream is done by reference rather than pointer.
Key class:
@Embeddable
@Access (AccessType.FIELD)
public class EntryKey implements Serializable {
public EntryKey() {
}
public EntryKey(final Long id, final Long version) {
this.id = id;
this.version = version;
}
public Long getId() {
return this.id;
}
public void setId(Long id) {
this.id = id;
}
public Long getVersion() {
return this.version;
}
public void setVersion(Long version) {
this.version = version;
}
public boolean equals(Object other) {
if (this == other)
return true;
if (!(other instanceof EntryKey))
return false;
EntryKey castOther = (EntryKey) other;
return id.equals(castOther.id) && version.equals(castOther.version);
}
public int hashCode() {
final int prime = 31;
int hash = 17;
hash = hash * prime + this.id.hashCode();
hash = hash * prime + this.version.hashCode();
return hash;
}
@Column (name = "ID")
private Long id;
@Column (name = "VERSION")
private Long operatorId;
}
Entity class:
@Entity
@Table (name = "YOUR_TABLE_NAME")
public class Entry implements Serializable {
@EmbeddedId
public EntryKey getKey() {
return this.key;
}
public void setKey(EntryKey id) {
this.id = id;
}
...
private EntryKey key;
...
}
How can I duplicate it with another Version?
You can detach entity which retrieved from provider, change the key of Entry and then persist it as a new entity.
As I mentioned in this answer, if the server runs on a port other than 80 (as might be common on a development/intranet machine) then HTTP_HOST
contains the port, while SERVER_NAME
does not.
$_SERVER['HTTP_HOST'] == 'localhost:8080'
$_SERVER['SERVER_NAME'] == 'localhost'
(At least that's what I've noticed in Apache port-based virtualhosts)
Note that HTTP_HOST
does not contain :443
when running on HTTPS (unless you're running on a non-standard port, which I haven't tested).
As others have noted, the two also differ when using IPv6:
$_SERVER['HTTP_HOST'] == '[::1]'
$_SERVER['SERVER_NAME'] == '::1'
You can also try this to determine the current global sql_mode
value:
SELECT @@GLOBAL.sql_mode;
or session sql_mode
value:
SELECT @@SESSION.sql_mode;
I also had the feeling that the SQL mode was indeed empty.
If you are looking to just repopulate the fields with the values that were posted in them, then just echo the post value back into the field, like so:
<input type="text" name="myField1" value="<?php echo isset($_POST['myField1']) ? $_POST['myField1'] : '' ?>" />
just use following code
c = np.matrix([[1, 2, 3], [4, 5, 6], [7, 8, 9]])
matrix([[1, 2, 3],
[4, 5, 6],
[7, 8, 9]])
Then it will give you
you can check shape and dimension of matrix by using following code
c.shape
c.ndim
This is a follow up to the answer given by @EricWoodruff.
You could use netInfo
's getExtraInfo()
to get wifi SSID.
if (WifiManager.NETWORK_STATE_CHANGED_ACTION.equals (action)) {
NetworkInfo netInfo = intent.getParcelableExtra (WifiManager.EXTRA_NETWORK_INFO);
if (ConnectivityManager.TYPE_WIFI == netInfo.getType ()) {
String ssid = info.getExtraInfo()
Log.d(TAG, "WiFi SSID: " + ssid)
}
}
If you are not using BroadcastReceiver check this answer to get SSID using Context
This is tested on Android Oreo 8.1.0
I had this problem too but the cause was different. I'm using VS2017 with F# 4.0.
Firstly, the console in Visual Studio does not give you enough details why the tests could not be found; it will just fail to the load the DLL with the tests. So use NUnit3console.exe on the command line as this gives you more details.
In my case, it was because the test adapter was looking for a newer version of the F# Core DLL (4.4.1.0) (F# 4.1) whereas I'm still using 4.4.0.0 (F# 4.0). So I just added this to the app.config of the test project:-
<dependentAssembly>
<assemblyIdentity name="FSharp.Core" publicKeyToken="b03f5f7f11d50a3a" culture="neutral" />
<bindingRedirect oldVersion="0.0.0.0-65535.65535.65535.65535" newVersion="4.4.0.0" />
</dependentAssembly>
i.e. redirect to the earlier F# core.
Normally i use a class for this:
public class ClassName
{
public string Col1 { get; set; }
public int Col2 { get; set; }
}
Now you can use a loop to fill a list and ToArray
if you really need an array:
ClassName[] allRecords = null;
string sql = @"SELECT col1,col2
FROM some table";
using (var command = new SqlCommand(sql, con))
{
con.Open();
using (var reader = command.ExecuteReader())
{
var list = new List<ClassName>();
while (reader.Read())
list.Add(new ClassName { Col1 = reader.GetString(0), Col2 = reader.GetInt32(1) });
allRecords = list.ToArray();
}
}
Note that i've presumed that the first column is a string
and the second an integer
. Just to demonstrate that C# is typesafe and how you use the DataReader.GetXY
methods.
There's the more general but perhaps not as helpful to you Wireshark.
One of the SO server sites might be better suited for your question. In fact, it's already been asked on SuperUser.
Keep in mind if you are wanting to test this component you will want to inject the window. Use the @Inject() function to inject the window object by naming it using a string token like detailed in this duplicate
For Kotlin Users
You just need to add ? with Intent in onActivityResult
as the data can be null
if user cancels the transaction or anything goes wrong. So we need to define data as nullable
in onActivityResult
Just replace onActivityResult
signature of SampleActivity with below:
override fun onActivityResult(requestCode: Int, resultCode: Int, data: Intent?)
I had this issue and realised that whilst I did have libxml2 installed, I didn't have the necessary development libraries required by the python package. Installing them solved the problem:
sudo apt-get install libxml2-dev libxslt1-dev
sudo pip install lxml
If using Visual Studio 2012 and later (which uses .NET regular expressions), you can remove trailing whitespace without removing blank lines by using the following regex
Replace (?([^\r\n])\s)+(\r?\n)
With $1
Some explanation
The reason you need the rather complicated expression is that the character class \s
matches spaces, tabs and newline characters, so \s+
will match a group of lines containing only whitespace. It doesn't help adding a $
termination to this regex, because this will still match a group of lines containing only whitespace and newline characters.
You may also want to know (as I did) exactly what the (?([^\r\n])\s)
expression means. This is an Alternation Construct, which effectively means match to the whitespace character class if it is not a carriage return or linefeed.
Alternation constructs normally have a true and false part,
(?( expression ) yes | no )
but in this case the false part is not specified.
It allows browsers to determine if they can handle the scripting/style language before making a request for the script or stylesheet (or, in the case of embedded script/style, identify which language is being used).
This would be much more important if there had been more competition among languages in browser space, but VBScript never made it beyond IE and PerlScript never made it beyond an IE specific plugin while JSSS was pretty rubbish to begin with.
The draft of HTML5 makes the attribute optional.
First of all, your variable "isLeapYear" is the same name as the method. That's just bad practice.
Second, you're not declaring "isLeapYear" as a variable.
Java is strongly typed so you need a
boolean isLeapYear;
in the beginning of your method.
This call:
System.out.println(boolean isLeapYear);
is just wrong. There are no declarations in method calls.
Once you have declared isLeapYear to be a boolean variable, you can call
System.out.println(isLeapYear);
UPDATE:
I just saw it's declared as a field. So just remove the line System.out.println(boolean isLeapYear);
You should understand that you can't call isLeapYear from the main() method. You cannot call a non static method from a static method with an instance.
If you want to call it, you need to add
booleanfun myBoolFun = new booleanfun();
System.out.println(myBoolFun.isLeapYear);
I really suggest you use Eclipse, it will let you know of such compilation errors on the fly and its much easier to learn that way.
Regarding tokens carrying information, JSON Web Tokens (http://jwt.io) is a brilliant technology. The main concept is to embed information elements (claims) into the token, and then signing the whole token so that the validating end can verify that the claims are indeed trustworthy.
I use this Java implementation: https://bitbucket.org/b_c/jose4j/wiki/Home
There is also a Spring module (spring-security-jwt), but I haven't looked into what it supports.
I think that you had intialized a 3d array but you are trying to access an array with 4 dimension.
In C++17, new functions std::to_chars and std::from_chars are introduced in header charconv.
std::to_chars is locale-independent, non-allocating, and non-throwing.
Only a small subset of formatting policies used by other libraries (such as std::sprintf) is provided.
From std::to_chars, same for std::from_chars.
The guarantee that std::from_chars can recover every floating-point value formatted by to_chars exactly is only provided if both functions are from the same implementation
// See en.cppreference.com for more information, including format control.
#include <cstdio>
#include <cstddef>
#include <cstdlib>
#include <cassert>
#include <charconv>
using Type = /* Any fundamental type */ ;
std::size_t buffer_size = /* ... */ ;
[[noreturn]] void report_and_exit(int ret, const char *output) noexcept
{
std::printf("%s\n", output);
std::exit(ret);
}
void check(const std::errc &ec) noexcept
{
if (ec == std::errc::value_too_large)
report_and_exit(1, "Failed");
}
int main() {
char buffer[buffer_size];
Type val_to_be_converted, result_of_converted_back;
auto result1 = std::to_chars(buffer, buffer + buffer_size, val_to_be_converted);
check(result1.ec);
*result1.ptr = '\0';
auto result2 = std::from_chars(buffer, result1.ptr, result_of_converted_back);
check(result2.ec);
assert(val_to_be_converted == result_of_converted_back);
report_and_exit(0, buffer);
}
Although it's not fully implemented by compilers, it definitely will be implemented.
When you want to have cross component interaction, then you need to know what are @Input , @Output , EventEmitter and Subjects.
If the relation between components is parent- child or vice versa we use @input & @output with event emitter..
@output emits an event and you need to emit using event emitter.
If it's not parent child relationship.. then you have to use subjects or through a common service.
DDL = Data Definition Language, any commands that provides structure and other information about your data
DML = Data Manipulation Language, there's only 3 of them, INSERT, UPDATE, DELETE. 4, if you will count SELECT * INTO x_tbl from tbl
of MSSQL (ANSI SQL: CREATE TABLE x_tbl AS SELECT * FROM tbl
)
Assuming TableA
as an entity of table TableA
, and TableADBEntities
as DB Entity class,
IQueryable<TableA> result;
using (var context = new TableADBEntities())
{
result = context.TableA.Select(s => s);
}
IQueryable<TableA> result;
using (var context = new TableADBEntities())
{
var qry = from s in context.TableA
select s;
result = qry.Select(s => s);
}
Native SQL can also be used as:
IList<TableA> resultList;
using (var context = new TableADBEntities())
{
resultList = context.TableA.SqlQuery("Select * from dbo.TableA").ToList();
}
Note: dbo
is a default schema owner in SQL Server. One can construct a SQL SELECT
query as per the database in the context.
set the height to 200
Set the Font
to a large variant (150+ px). As already mentioned, control the width using columns, and use a layout manager (or constraint) that will respect the preferred width & height.
import java.awt.*;
import javax.swing.*;
import javax.swing.border.EmptyBorder;
public class BigTextField {
public static void main(String[] args) {
Runnable r = new Runnable() {
@Override
public void run() {
// the GUI as seen by the user (without frame)
JPanel gui = new JPanel(new FlowLayout(5));
gui.setBorder(new EmptyBorder(2, 3, 2, 3));
// Create big text fields & add them to the GUI
String s = "Hello!";
JTextField tf1 = new JTextField(s, 1);
Font bigFont = tf1.getFont().deriveFont(Font.PLAIN, 150f);
tf1.setFont(bigFont);
gui.add(tf1);
JTextField tf2 = new JTextField(s, 2);
tf2.setFont(bigFont);
gui.add(tf2);
JTextField tf3 = new JTextField(s, 3);
tf3.setFont(bigFont);
gui.add(tf3);
gui.setBackground(Color.WHITE);
JFrame f = new JFrame("Big Text Fields");
f.add(gui);
// Ensures JVM closes after frame(s) closed and
// all non-daemon threads are finished
f.setDefaultCloseOperation(JFrame.DISPOSE_ON_CLOSE);
// See http://stackoverflow.com/a/7143398/418556 for demo.
f.setLocationByPlatform(true);
// ensures the frame is the minimum size it needs to be
// in order display the components within it
f.pack();
// should be done last, to avoid flickering, moving,
// resizing artifacts.
f.setVisible(true);
}
};
// Swing GUIs should be created and updated on the EDT
// http://docs.oracle.com/javase/tutorial/uiswing/concurrency/initial.html
SwingUtilities.invokeLater(r);
}
}
YUI 2 and 3 has a module stylesheet that will let you do just that (edit stylesheets on the fly with javascript). http://yuilibrary.com/yui/docs/stylesheet/. So I think it is possible. This is not the same as $(".some").css({...}) but really change/add/remove styles definition from stylesheet, just like the user asked.
You can use fuser to get what you want to be done.
In order to obtain the process ids of the tasks running on a port you can do:
fuser <<target_port>>/tcp
Let's say the port is 8888, the command becomes:
fuser 8888/tcp
And to kill a process that is running on a port, simply add -k switch.
fuser <<target_port>>/tcp -k
Example (port is 8888):
fuser 8888/tcp -k
That's it! It will close the process listening on the port. I usually do this before running my server application.
||=
is called a conditional assignment operator.
It basically works as =
but with the exception that if a variable has already been assigned it will do nothing.
First example:
x ||= 10
Second example:
x = 20
x ||= 10
In the first example x
is now equal to 10. However, in the second example x
is already defined as 20. So the conditional operator has no effect. x
is still 20 after running x ||= 10
.
Like lucius said, it's not possible to have a C array property. Using an NSArray
is the way to go. An array only stores objects, so you'd have to use NSNumber
s to store your ints. With the new literal syntax, initialising it is very easy and straight-forward:
NSArray *doubleDigits = @[ @1, @2, @3, @4, @5, @6, @7, @8, @9, @10 ];
Or:
NSMutableArray *doubleDigits = [NSMutableArray array];
for (int n = 1; n <= 10; n++)
[doubleDigits addObject:@(n)];
For more information: NSArray Class Reference, NSNumber Class Reference, Literal Syntax
Yes, but none of them will manage to produce readable enough code to worth the effort. You will spend more time trying to read the decompiled source with assembler blocks inside, than rewriting your old app from scratch.
Removes everything between &
and ;
which all such symbols have. if you juts want to get rid of them.
text.replace(/&.*;/g,'');
The easiest function
To read the sms I wrote a function that returns a Conversation object:
class Conversation(val number: String, val message: List<Message>)
class Message(val number: String, val body: String, val date: Date)
fun getSmsConversation(context: Context, number: String? = null, completion: (conversations: List<Conversation>?) -> Unit) {
val cursor = context.contentResolver.query(Telephony.Sms.CONTENT_URI, null, null, null, null)
val numbers = ArrayList<String>()
val messages = ArrayList<Message>()
var results = ArrayList<Conversation>()
while (cursor != null && cursor.moveToNext()) {
val smsDate = cursor.getString(cursor.getColumnIndexOrThrow(Telephony.Sms.DATE))
val number = cursor.getString(cursor.getColumnIndexOrThrow(Telephony.Sms.ADDRESS))
val body = cursor.getString(cursor.getColumnIndexOrThrow(Telephony.Sms.BODY))
numbers.add(number)
messages.add(Message(number, body, Date(smsDate.toLong())))
}
cursor?.close()
numbers.forEach { number ->
if (results.find { it.number == number } == null) {
val msg = messages.filter { it.number == number }
results.add(Conversation(number = number, message = msg))
}
}
if (number != null) {
results = results.filter { it.number == number } as ArrayList<Conversation>
}
completion(results)
}
Using:
getSmsConversation(this){ conversations ->
conversations.forEach { conversation ->
println("Number: ${conversation.number}")
println("Message One: ${conversation.message[0].body}")
println("Message Two: ${conversation.message[1].body}")
}
}
Or get only conversation of specific number:
getSmsConversation(this, "+33666494128"){ conversations ->
conversations.forEach { conversation ->
println("Number: ${conversation.number}")
println("Message One: ${conversation.message[0].body}")
println("Message Two: ${conversation.message[1].body}")
}
}
babel-polyfill allows you to use the full set of ES6 features beyond syntax changes. This includes features such as new built-in objects like Promises and WeakMap, as well as new static methods like Array.from or Object.assign.
Without babel-polyfill, babel only allows you to use features like arrow functions, destructuring, default arguments, and other syntax-specific features introduced in ES6.
https://www.quora.com/What-does-babel-polyfill-do
https://hackernoon.com/polyfills-everything-you-ever-wanted-to-know-or-maybe-a-bit-less-7c8de164e423
git reset --hard can help you if you want to throw away everything since your last commit
I have figured it out lol. for the button do .setBounds(0, 0, 220, 30) The .setBounds layout is like this (int x, int y, int width, int height)
The Future interface from the java.lang.concurrent
package is designed to provide access to results calculated in another thread.
Take a look at FutureTask and ExecutorService for a ready-made way of doing this kind of thing.
I'd strongly recommend reading Java Concurrency In Practice to anyone interested in concurrency and multithreading. It obviously concentrates on Java, but there is plenty of meat for anybody working in other languages too.
First of all, the code you wrote isn't portable, even if you get it to work. Why use OS-specific functions when there is a perfectly platform-independent way of doing it? Here's a version that uses just a single header file and is portable to any platform that implements the C standard library.
#include <stdio.h>
int main(int argc, char **argv)
{
FILE* sourceFile;
FILE* destFile;
char buf[50];
int numBytes;
if(argc!=3)
{
printf("Usage: fcopy source destination\n");
return 1;
}
sourceFile = fopen(argv[1], "rb");
destFile = fopen(argv[2], "wb");
if(sourceFile==NULL)
{
printf("Could not open source file\n");
return 2;
}
if(destFile==NULL)
{
printf("Could not open destination file\n");
return 3;
}
while(numBytes=fread(buf, 1, 50, sourceFile))
{
fwrite(buf, 1, numBytes, destFile);
}
fclose(sourceFile);
fclose(destFile);
return 0;
}
EDIT: The glibc reference has this to say:
In general, you should stick with using streams rather than file descriptors, unless there is some specific operation you want to do that can only be done on a file descriptor. If you are a beginning programmer and aren't sure what functions to use, we suggest that you concentrate on the formatted input functions (see Formatted Input) and formatted output functions (see Formatted Output).
If you are concerned about portability of your programs to systems other than GNU, you should also be aware that file descriptors are not as portable as streams. You can expect any system running ISO C to support streams, but non-GNU systems may not support file descriptors at all, or may only implement a subset of the GNU functions that operate on file descriptors. Most of the file descriptor functions in the GNU library are included in the POSIX.1 standard, however.
PostgreSQL has a guide on how to best populate a database initially, and they suggest using the COPY command for bulk loading rows. The guide has some other good tips on how to speed up the process, like removing indexes and foreign keys before loading the data (and adding them back afterwards).
Arrays are always passed by reference if you use a[]
or *a
:
int* printSquares(int a[], int size, int e[]) {
for(int i = 0; i < size; i++) {
e[i] = i * i;
}
return e;
}
int* printSquares(int *a, int size, int e[]) {
for(int i = 0; i < size; i++) {
e[i] = i * i;
}
return e;
}
Here's my C code for resolving a collision between a sphere and a non-axis aligned box. It relies on a couple of my own library routines, but it may prove useful to some. I'm using it in a game and it works perfectly.
float physicsProcessCollisionBetweenSelfAndActorRect(SPhysics *self, SPhysics *actor)
{
float diff = 99999;
SVector relative_position_of_circle = getDifference2DBetweenVectors(&self->worldPosition, &actor->worldPosition);
rotateVector2DBy(&relative_position_of_circle, -actor->axis.angleZ); // This aligns the coord system so the rect becomes an AABB
float x_clamped_within_rectangle = relative_position_of_circle.x;
float y_clamped_within_rectangle = relative_position_of_circle.y;
LIMIT(x_clamped_within_rectangle, actor->physicsRect.l, actor->physicsRect.r);
LIMIT(y_clamped_within_rectangle, actor->physicsRect.b, actor->physicsRect.t);
// Calculate the distance between the circle's center and this closest point
float distance_to_nearest_edge_x = relative_position_of_circle.x - x_clamped_within_rectangle;
float distance_to_nearest_edge_y = relative_position_of_circle.y - y_clamped_within_rectangle;
// If the distance is less than the circle's radius, an intersection occurs
float distance_sq_x = SQUARE(distance_to_nearest_edge_x);
float distance_sq_y = SQUARE(distance_to_nearest_edge_y);
float radius_sq = SQUARE(self->physicsRadius);
if(distance_sq_x + distance_sq_y < radius_sq)
{
float half_rect_w = (actor->physicsRect.r - actor->physicsRect.l) * 0.5f;
float half_rect_h = (actor->physicsRect.t - actor->physicsRect.b) * 0.5f;
CREATE_VECTOR(push_vector);
// If we're at one of the corners of this object, treat this as a circular/circular collision
if(fabs(relative_position_of_circle.x) > half_rect_w && fabs(relative_position_of_circle.y) > half_rect_h)
{
SVector edges;
if(relative_position_of_circle.x > 0) edges.x = half_rect_w; else edges.x = -half_rect_w;
if(relative_position_of_circle.y > 0) edges.y = half_rect_h; else edges.y = -half_rect_h;
push_vector = relative_position_of_circle;
moveVectorByInverseVector2D(&push_vector, &edges);
// We now have the vector from the corner of the rect to the point.
float delta_length = getVector2DMagnitude(&push_vector);
float diff = self->physicsRadius - delta_length; // Find out how far away we are from our ideal distance
// Normalise the vector
push_vector.x /= delta_length;
push_vector.y /= delta_length;
scaleVector2DBy(&push_vector, diff); // Now multiply it by the difference
push_vector.z = 0;
}
else // Nope - just bouncing against one of the edges
{
if(relative_position_of_circle.x > 0) // Ball is to the right
push_vector.x = (half_rect_w + self->physicsRadius) - relative_position_of_circle.x;
else
push_vector.x = -((half_rect_w + self->physicsRadius) + relative_position_of_circle.x);
if(relative_position_of_circle.y > 0) // Ball is above
push_vector.y = (half_rect_h + self->physicsRadius) - relative_position_of_circle.y;
else
push_vector.y = -((half_rect_h + self->physicsRadius) + relative_position_of_circle.y);
if(fabs(push_vector.x) < fabs(push_vector.y))
push_vector.y = 0;
else
push_vector.x = 0;
}
diff = 0; // Cheat, since we don't do anything with the value anyway
rotateVector2DBy(&push_vector, actor->axis.angleZ);
SVector *from = &self->worldPosition;
moveVectorBy2D(from, push_vector.x, push_vector.y);
}
return diff;
}
There is an implementation in my TypeScript utilities based on JavaScript GUID generators.
Here is the code:
class Guid {_x000D_
static newGuid() {_x000D_
return 'xxxxxxxx-xxxx-4xxx-yxxx-xxxxxxxxxxxx'.replace(/[xy]/g, function(c) {_x000D_
var r = Math.random() * 16 | 0,_x000D_
v = c == 'x' ? r : (r & 0x3 | 0x8);_x000D_
return v.toString(16);_x000D_
});_x000D_
}_x000D_
}_x000D_
_x000D_
// Example of a bunch of GUIDs_x000D_
for (var i = 0; i < 100; i++) {_x000D_
var id = Guid.newGuid();_x000D_
console.log(id);_x000D_
}
_x000D_
Please note the following:
C# GUIDs are guaranteed to be unique. This solution is very likely to be unique. There is a huge gap between "very likely" and "guaranteed" and you don't want to fall through this gap.
JavaScript-generated GUIDs are great to use as a temporary key that you use while waiting for a server to respond, but I wouldn't necessarily trust them as the primary key in a database. If you are going to rely on a JavaScript-generated GUID, I would be tempted to check a register each time a GUID is created to ensure you haven't got a duplicate (an issue that has come up in the Chrome browser in some cases).
Best way in my opinion.
$.fn.findByContentText = function (text) {
return $(this).contents().filter(function () {
return $(this).text().trim() == text.trim();
});
};
To summarize the below posts a bit:
If all you care about is if at least one matching row is in the DB then use exists
as it is the most efficient way of checking this: it will return true as soon as it finds at least one matching row whereas count
, etc will find all matching rows.
If you actually need to use the data for processing or if the query has side effects, or if you need to know the actual total number of rows then checking the ROWCOUNT
or count
is probably the best way on hand.
Just looking at the message it sounds like one or more of the components that you reference, or one or more of their dependencies is not registered properly.
If you know which component it is you can use regsvr32.exe to register it, just open a command prompt, go to the directory where the component is and type regsvr32 filename.dll
(assuming it's a dll), if it works, try to run the code again otherwise come back here with the error.
If you don't know which component it is, try re-installing/repairing the GIS software (I assume you've installed some GIS software that includes the component you're trying to use).
This is the most common way -- it really depends on what you are doing exactly: (To explain, the example below will remove the last 10 characters which is what you asked for, however if there are some business rules that are driving your need to find a specific location you should use those to retrieve the directory location, not find the location of something else and modify it.)
// remove last 10 characters from a string
str_directory = str_directory.Substring(0,str_directory.Length-10);
In simple words
$.ajax("info.txt").done(function(data) {
alert(data);
}).fail(function(data){
alert("Try again champ!");
});
if its get the info.text then it will alert and whatever function you add or if any how unable to retrieve info.text from the server then alert or error function.
Vanilla node version as requested:
var http = require('http');
var url = require('url');
var path = require('path');
var fs = require('fs');
http.createServer(function(req, res) {
// parse url
var request = url.parse(req.url, true);
var action = request.pathname;
// disallow non get requests
if (req.method !== 'GET') {
res.writeHead(405, {'Content-Type': 'text/plain' });
res.end('405 Method Not Allowed');
return;
}
// routes
if (action === '/') {
res.writeHead(200, {'Content-Type': 'text/plain' });
res.end('Hello World \n');
return;
}
// static (note not safe, use a module for anything serious)
var filePath = path.join(__dirname, action).split('%20').join(' ');
fs.exists(filePath, function (exists) {
if (!exists) {
// 404 missing files
res.writeHead(404, {'Content-Type': 'text/plain' });
res.end('404 Not Found');
return;
}
// set the content type
var ext = path.extname(action);
var contentType = 'text/plain';
if (ext === '.gif') {
contentType = 'image/gif'
}
res.writeHead(200, {'Content-Type': contentType });
// stream the file
fs.createReadStream(filePath, 'utf-8').pipe(res);
});
}).listen(8080, '127.0.0.1');
You don't have to uninstall any higher version of sdk. just install jdk1.8.0_161 or don't if it is already install.
Now just set the JAVA_HOME
USER variable (not system variable) as shown in the below image.
This way you don't have to uninstall higher version and the problem get resolved.
Installing fiddler was causing me similar problem. Uninstalling fiddler and removing the fiddler proxy from the machine.config (from both Framework and Framework64) solved the problem.
Parse timespan to DateTime and then use Format ("hh:mm:tt"). For example.
TimeSpan ts = new TimeSpan(16, 00, 00);
DateTime dtTemp = DateTime.ParseExact(ts.ToString(), "HH:mm:ss", CultureInfo.InvariantCulture);
string str = dtTemp.ToString("hh:mm tt");
str
will be:
str = "04:00 PM"
in your server side the code looks like:
var request = require('request');
app.post('/add', function(req, res){
console.log(req.body);
request.post(
{
url:'http://localhost:6001/add',
json: {
unit_name:req.body.unit_name,
unit_price:req.body.unit_price
},
headers: {
'Content-Type': 'application/json'
}
},
function(error, response, body){
// console.log(error);
// console.log(response);
console.log(body);
res.send(body);
});
// res.send("body");
});
in receiving end server code looks like:
app.post('/add', function(req, res){
console.log('received request')
console.log(req.body);
let adunit = new AdUnit(req.body);
adunit.save()
.then(game => {
res.status(200).json({'adUnit':'AdUnit is added successfully'})
})
.catch(err => {
res.status(400).send('unable to save to database');
})
});
Schema is just two properties unit_name and unit_price.
I'm not aware of anything like a single table that lets you compare all of them in at one glance (I'm not sure such a table would even be feasible).
Of course the ISO standard document enumerates the complexity requirements in detail, sometimes in various rather readable tables, other times in less readable bullet points for each specific method.
Also the STL library reference at http://www.cplusplus.com/reference/stl/ provides the complexity requirements where appropriate.
A super short version, here, without position:absolute
in vanilla JavaScript. The main idea is to move the canvas' context to the right coordinates and draw a line. Uncomment click
handler and comment mousedown
& mousemove
handlers below to get a feel for how it is working.
<!DOCTYPE html>
<html>
<body>
<p style="margin: 50px">Just some padding in y direction</p>
<canvas id="myCanvas" width="300" height="300" style="background: #000; margin-left: 100px;">Your browser does not support the HTML5 canvas tag.</canvas>
<script>
const c = document.getElementById("myCanvas");
// c.addEventListener("click", penTool); // fires after mouse left btn is released
c.addEventListener("mousedown", setLastCoords); // fires before mouse left btn is released
c.addEventListener("mousemove", freeForm);
const ctx = c.getContext("2d");
function setLastCoords(e) {
const {x, y} = c.getBoundingClientRect();
lastX = e.clientX - x;
lastY = e.clientY - y;
}
function freeForm(e) {
if (e.buttons !== 1) return; // left button is not pushed yet
penTool(e);
}
function penTool(e) {
const {x, y} = c.getBoundingClientRect();
const newX = e.clientX - x;
const newY = e.clientY - y;
ctx.beginPath();
ctx.lineWidth = 5;
ctx.moveTo(lastX, lastY);
ctx.lineTo(newX, newY);
ctx.strokeStyle = 'white';
ctx.stroke();
ctx.closePath();
lastX = newX;
lastY = newY;
}
let lastX = 0;
let lastY = 0;
</script>
</body>
</html>
The question is very vague. As BoltClock says, media queries only know the dimensions of the device. However, you can use media queries in combination with descender selectors to perform adjustments.
.wide_container { width: 50em }
.narrow_container { width: 20em }
.my_element { border: 1px solid }
@media (max-width: 30em) {
.wide_container .my_element {
color: blue;
}
.narrow_container .my_element {
color: red;
}
}
@media (max-width: 50em) {
.wide_container .my_element {
color: orange;
}
.narrow_container .my_element {
color: green;
}
}
The only other solution requires JS.
Choose a database name in Initial Catalog
Data Source=HARIHARAN-PC\SQLEXPRESS;Initial Catalog=your database name;Integrated Security=True" ;
echo "<a href='#' style = \"font-color: #ff0000;\"> Movie List for {$key} 2013 </a>";
For those that are following the example on this GoogleMaps - MapWithMarker project, you may remove the marker by doing so
override fun onMapReady(googleMap: GoogleMap?) {
googleMap?.apply {
// Remove marker
clear()
val sydney = LatLng(-33.852, 151.211)
addMarker(
MarkerOptions()
.position(sydney)
.title("Marker in Sydney")
)
moveCamera(CameraUpdateFactory.newLatLng(sydney))
}
}
You can store this in a long
. A long
can store a value from -9223372036854775808
to 9223372036854775807
.
Just put the full directory location in the File object.
File file = new File("z:\\results.txt");
You should really use .test()
:
if (!re16digit.test(document.myform.CreditCardNumber.value)) {
alert("Please ... ");
}
You should also look around for implementations of (one or more of) the card number checksum algorithms. They're very simple.
This is from the Docker documentation itself, might be of help, simple and plain:
"The host directory is, by its nature, host-dependent. For this reason, you can’t mount a host directory from Dockerfile, the VOLUME instruction does not support passing a host-dir, because built images should be portable. A host directory wouldn’t be available on all potential hosts.".
Not true for the OP, but this error can be caused by using single quotation marks ('
) instead of double ("
) for strings.
The JSON spec requires double quotation marks for strings.
E.g:
JSON.parse(`{"myparam": 'myString'}`)
gives the error, whereas
JSON.parse(`{"myparam": "myString"}`)
does not. Note the quotation marks around myString
.
Go to Project-> right Click-> Select Properties -> project Facets -> modify the java version for your JDK version you are using.
An alternative that worked for me is to tell Maven to use http: instead of https: when using Maven Central by adding the following to settings.xml:
<settings>
.
.
.
<mirrors>
<mirror>
<id>central-no-ssl</id>
<name>Central without ssl</name>
<url>http://repo.maven.apache.org/maven2</url>
<mirrorOf>central</mirrorOf>
</mirror>
</mirrors>
.
.
.
</settings>
Your mileage may vary of course.
I found out that with HostGator you have to set files to CMOD 644 and Folders to 755. Since I did this based on their tech support it works with HostGator
You could also make the ajax call more generic, reusable, so you can call it from different CRUD(create, read, update, delete) tasks for example and treat the success cases from those calls.
makePostCall = function (url, data) { // here the data and url are not hardcoded anymore
var json_data = JSON.stringify(data);
return $.ajax({
type: "POST",
url: url,
data: json_data,
dataType: "json",
contentType: "application/json;charset=utf-8"
});
}
// and here a call example
makePostCall("index.php?action=READUSERS", {'city' : 'Tokio'})
.success(function(data){
// treat the READUSERS data returned
})
.fail(function(sender, message, details){
alert("Sorry, something went wrong!");
});
You need to use the TO_DATE
function.
SELECT TO_DATE('01/01/2004', 'MM/DD/YYYY') FROM DUAL;
This will give you the last day of the month:
function lastday($month = '', $year = '') {
if (empty($month)) {
$month = date('m');
}
if (empty($year)) {
$year = date('Y');
}
$result = strtotime("{$year}-{$month}-01");
$result = strtotime('-1 second', strtotime('+1 month', $result));
return date('Y-m-d', $result);
}
And the first Day:
function firstDay($month = '', $year = '')
{
if (empty($month)) {
$month = date('m');
}
if (empty($year)) {
$year = date('Y');
}
$result = strtotime("{$year}-{$month}-01");
return date('Y-m-d', $result);
}
I just wanted to know if the dictionary i was going to try to pull data from had data in it in the first place, this seems to be simplest way.
d = {}
bool(d)
#should return
False
d = {'hello':'world'}
bool(d)
#should return
True
Pandas has the itertuples
method to do exactly this:
list(df[['lat', 'long']].itertuples(index=False, name=None))
Your fns is a cellstr array. You need to index in to it with {} instead of () to get the single string out as char.
fns{i}
teststruct.(fns{i})
Indexing in to it with () returns a 1-long cellstr array, which isn't the same format as the char array that the ".(name)" dynamic field reference wants. The formatting, especially in the display output, can be confusing. To see the difference, try this.
name_as_char = 'a'
name_as_cellstr = {'a'}
You need to store all of the extra rows in the files in your dictionary, not just one of them:
dict1 = {row[0]: row[1:] for row in r}
...
dict2 = {row[0]: row[1:] for row in r}
Then, since the values in the dictionaries are lists, you need to just concatenate the lists together:
w.writerows([[key] + dict1.get(key, []) + dict2.get(key, []) for key in keys])
We have experienced similar issue, and the problem was MySQL used /tmp directory for its needs (it's default configuration). And /tmp was located on its own partition, that had too few space for big MySQL requests.
For more details take a look for this answer: https://stackoverflow.com/a/3716778/994302
None of these https://stackoverflow.com/a/7597360/808128 do work for me. Even "adding assembly referecene to system.web/compilation/assemblies section of the root web.config file". So the two ways remains for me: 1) to add a public wrap class for my assembly that Razor code can access to this assembly through this wrap; 2) just add assembly logic to a public class in the same assembly where the Razor's code is located.
Correct Solution is this
- (void)viewDidLoad
{
[super viewDidLoad];
[self.tableView registerNib:[UINib nibWithNibName:@"CustomCell" bundle:[NSBundle mainBundle]] forCellReuseIdentifier:@"CustomCell"];
}
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath{
UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:@"CustomCell"];
return cell;
}
On my Mac that I'm sure I'm not going to allow java anyplace other than a specific site, I was able to use Preferences->Java to bring up the Java control panel and turned the checking off. If DLink ever fixes their certificate, I'll turn it back on.
I got lucky and answered this in a comment to the question, but I'm posting a full answer for the sake of completeness and so we can mark this question as "Answered".
It depends on what you want to accomplish by sharing a controller; you can either share the same controller (though have different instances), or you can share the same controller instance.
Share a Controller
Two directives can use the same controller by passing the same method to two directives, like so:
app.controller( 'MyCtrl', function ( $scope ) {
// do stuff...
});
app.directive( 'directiveOne', function () {
return {
controller: 'MyCtrl'
};
});
app.directive( 'directiveTwo', function () {
return {
controller: 'MyCtrl'
};
});
Each directive will get its own instance of the controller, but this allows you to share the logic between as many components as you want.
Require a Controller
If you want to share the same instance of a controller, then you use require
.
require
ensures the presence of another directive and then includes its controller as a parameter to the link function. So if you have two directives on one element, your directive can require the presence of the other directive and gain access to its controller methods. A common use case for this is to require ngModel
.
^require
, with the addition of the caret, checks elements above directive in addition to the current element to try to find the other directive. This allows you to create complex components where "sub-components" can communicate with the parent component through its controller to great effect. Examples could include tabs, where each pane can communicate with the overall tabs to handle switching; an accordion set could ensure only one is open at a time; etc.
In either event, you have to use the two directives together for this to work. require
is a way of communicating between components.
Check out the Guide page of directives for more info: http://docs.angularjs.org/guide/directive
They are both going to have the same effect.
However, as pointed out in the comments: $(window).scrollTop()
is supported by more web browsers than $('html').scrollTop()
.
Try:
dmesg -T| grep -E -i -B100 'killed process'
Where -B100
signifies the number of lines before the kill happened.
Omit -T on Mac OS.
Use AdapterDataObserver in custom RecyclerView
Kotlin:
RecyclerViewEnum.kt
enum class RecyclerViewEnum {
LOADING,
NORMAL,
EMPTY_STATE
}
RecyclerViewEmptyLoadingSupport.kt
class RecyclerViewEmptyLoadingSupport : RecyclerView {
var stateView: RecyclerViewEnum? = RecyclerViewEnum.LOADING
set(value) {
field = value
setState()
}
var emptyStateView: View? = null
var loadingStateView: View? = null
constructor(context: Context) : super(context) {}
constructor(context: Context, attrs: AttributeSet) : super(context, attrs) {}
constructor(context: Context, attrs: AttributeSet, defStyle: Int) : super(context, attrs, defStyle) {}
private val dataObserver = object : AdapterDataObserver() {
override fun onChanged() {
onChangeState()
}
override fun onItemRangeRemoved(positionStart: Int, itemCount: Int) {
super.onItemRangeRemoved(positionStart, itemCount)
onChangeState()
}
override fun onItemRangeInserted(positionStart: Int, itemCount: Int) {
super.onItemRangeInserted(positionStart, itemCount)
onChangeState()
}
}
override fun setAdapter(adapter: RecyclerView.Adapter<*>?) {
super.setAdapter(adapter)
adapter?.registerAdapterDataObserver(dataObserver)
dataObserver.onChanged()
}
fun onChangeState() {
if (adapter?.itemCount == 0) {
emptyStateView?.visibility = View.VISIBLE
loadingStateView?.visibility = View.GONE
[email protected] = View.GONE
} else {
emptyStateView?.visibility = View.GONE
loadingStateView?.visibility = View.GONE
[email protected] = View.VISIBLE
}
}
private fun setState() {
when (this.stateView) {
RecyclerViewEnum.LOADING -> {
loadingStateView?.visibility = View.VISIBLE
[email protected] = View.GONE
emptyStateView?.visibility = View.GONE
}
RecyclerViewEnum.NORMAL -> {
loadingStateView?.visibility = View.GONE
[email protected] = View.VISIBLE
emptyStateView?.visibility = View.GONE
}
RecyclerViewEnum.EMPTY_STATE -> {
loadingStateView?.visibility = View.GONE
[email protected] = View.GONE
emptyStateView?.visibility = View.VISIBLE
}
}
}
}
layout.xml
<?xml version="1.0" encoding="utf-8"?>
<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
android:layout_width="match_parent"
android:layout_height="wrap_content"
android:orientation="vertical">
<LinearLayout
android:id="@+id/emptyView"
android:layout_width="match_parent"
android:layout_height="match_parent"
android:background="@color/white"
android:gravity="center"
android:orientation="vertical">
<TextView
android:id="@+id/emptyLabelTv"
android:layout_width="match_parent"
android:layout_height="wrap_content"
android:text="empty" />
</LinearLayout>
<LinearLayout
android:id="@+id/loadingView"
android:layout_width="match_parent"
android:layout_height="match_parent"
android:background="@color/white"
android:gravity="center"
android:orientation="vertical">
<ProgressBar
android:id="@+id/progressBar"
android:layout_width="45dp"
android:layout_height="45dp"
android:layout_gravity="center"
android:indeterminate="true"
android:theme="@style/progressBarBlue" />
</LinearLayout>
<com.peeyade.components.recyclerView.RecyclerViewEmptyLoadingSupport
android:id="@+id/recyclerView"
android:layout_width="match_parent"
android:layout_height="match_parent" />
</LinearLayout>
in activity use this way:
recyclerView?.apply {
layoutManager = GridLayoutManager(context, 2)
emptyStateView = emptyView
loadingStateView = loadingView
adapter = adapterGrid
}
// you can set LoadingView or emptyView manual
recyclerView.stateView = RecyclerViewEnum.EMPTY_STATE
recyclerView.stateView = RecyclerViewEnum.LOADING
The way I've done this, which is a bit convoluted, is as follows:
That's worked for me! If there's a better way I'd love to know it!
This is really a set of configurations for your editor to understand Laravel.
If you want to configure it all manually, here is the repo. This is for both VS code and PhpStorm.
Or if you want you can download this package.(I created) recommended to install it globally.
And then just run andylaravel setupIDE
. this will configure everything for you according to the fist repo.
if you are using C#, why not using Environment.NewLine
? (i assume you use some file writer objects... just pass it the Environment.NewLine
and it will handle the right terminators.
One of the best semi solutions is to copy %1
into a variable and then use delayed expansion, as delayedExp. is always safe against any content.
set "param1=%~1"
setlocal EnableDelayedExpansion
if "!param1!"=="" ( echo it is empty )
rem ... or use the DEFINED keyword now
if defined param1 echo There is something
The advantage of this is that dealing with param1 is absolutly safe.
And the setting of param1 will work in many cases, like
test.bat hello"this is"a"test
test.bat you^&me
But it still fails with strange contents like
test.bat ^&"&
It detects if %1
is empty, but for some content it can't fetch the content.
This can be also be useful to distinguish between an empty %1
and one with ""
.
It uses the ability of the CALL
command to fail without aborting the batch file.
@echo off
setlocal EnableDelayedExpansion
set "arg1="
call set "arg1=%%1"
if defined arg1 goto :arg_exists
set "arg1=#"
call set "arg1=%%1"
if "!arg1!" EQU "#" (
echo arg1 exists, but can't assigned to a variable
REM Try to fetch it a second time without quotes
(call set arg1=%%1)
goto :arg_exists
)
echo arg1 is missing
exit /b
:arg_exists
echo arg1 exists, perhaps the content is '!arg1!'
If you want to be 100% bullet proof to fetch the content, you could read How to receive even the strangest command line parameters?
I actually check all bash scripts in current dir for syntax errors WITHOUT running them using find
tool:
Example:
find . -name '*.sh' -exec bash -n {} \;
If you want to use it for a single file, just edit the wildcard with the name of the file.
I think you've picked a bad example with System.Threading.Thread.Sleep
Point of an async
Task is to let it execute in background without locking the main thread, such as doing a DownloadFileAsync
System.Threading.Thread.Sleep
isn't something that is "being done", it just sleeps, and therefore your next line is reached after 5 seconds ...
Read this article, I think it is a great explanation of async
and await
concept: http://msdn.microsoft.com/en-us/library/vstudio/hh191443.aspx
Why do I need the descriptor class?
It gives you extra control over how attributes work. If you're used to getters and setters in Java, for example, then it's Python's way of doing that. One advantage is that it looks to users just like an attribute (there's no change in syntax). So you can start with an ordinary attribute and then, when you need to do something fancy, switch to a descriptor.
An attribute is just a mutable value. A descriptor lets you execute arbitrary code when reading or setting (or deleting) a value. So you could imagine using it to map an attribute to a field in a database, for example – a kind of ORM.
Another use might be refusing to accept a new value by throwing an exception in __set__
– effectively making the "attribute" read only.
What is
instance
andowner
here? (in__get__
). What is the purpose of these parameters?
This is pretty subtle (and the reason I am writing a new answer here - I found this question while wondering the same thing and didn't find the existing answer that great).
A descriptor is defined on a class, but is typically called from an instance. When it's called from an instance both instance
and owner
are set (and you can work out owner
from instance
so it seems kinda pointless). But when called from a class, only owner
is set – which is why it's there.
This is only needed for __get__
because it's the only one that can be called on a class. If you set the class value you set the descriptor itself. Similarly for deletion. Which is why the owner
isn't needed there.
How would I call/use this example?
Well, here's a cool trick using similar classes:
class Celsius:
def __get__(self, instance, owner):
return 5 * (instance.fahrenheit - 32) / 9
def __set__(self, instance, value):
instance.fahrenheit = 32 + 9 * value / 5
class Temperature:
celsius = Celsius()
def __init__(self, initial_f):
self.fahrenheit = initial_f
t = Temperature(212)
print(t.celsius)
t.celsius = 0
print(t.fahrenheit)
(I'm using Python 3; for python 2 you need to make sure those divisions are / 5.0
and / 9.0
). That gives:
100.0
32.0
Now there are other, arguably better ways to achieve the same effect in python (e.g. if celsius were a property, which is the same basic mechanism but places all the source inside the Temperature class), but that shows what can be done...
You have conditions that are mutually exclusive - if meta_key is 'first_name', it can't also be 'yearofpassing'. Most likely you need your AND's to be OR's:
$result = mysql_query("SELECT user_id FROM wp_usermeta
WHERE (meta_key = 'first_name' AND meta_value = '$us_name')
OR (meta_key = 'yearofpassing' AND meta_value = '$us_yearselect')
OR (meta_key = 'u_city' AND meta_value = '$us_reg')
OR (meta_key = 'us_course' AND meta_value = '$us_course')")
Universal method
public static <K, V> Map<K, V> listAsMap(Collection<V> sourceList, ListToMapConverter<K, V> converter) {
Map<K, V> newMap = new HashMap<K, V>();
for (V item : sourceList) {
newMap.put( converter.getKey(item), item );
}
return newMap;
}
public static interface ListToMapConverter<K, V> {
public K getKey(V item);
}
You can have any length, but of course, there can be a memory issue on the computer if the String input is too long. The output is always 32 characters.
This is typical programming practice for defining variables that are member variables. So when you're using them later, you don't need to see where they're defined to know their scope. This is also great if you already know the scope and you're using something like intelliSense, you can start with m_
and a list of all your member variables are shown. Part of Hungarian notation, see the part about scope in the examples here.
var test = {'red':'#FF0000', 'blue':'#0000FF'};_x000D_
delete test.blue; // or use => delete test['blue'];_x000D_
console.log(test);
_x000D_
this deletes test.blue
Recommended, without jQuery:
Give your <input>
an ID and refer to that. Also, remove the checked=""
part of the <input>
tag if you want the checkbox to start out unticked. Then it's:
document.getElementById("my-checkbox").checked = true;
Pure JavaScript, with no Element ID (#1):
var inputs = document.getElementsByTagName('input');
for(var i = 0; i<inputs.length; i++){
if(typeof inputs[i].getAttribute === 'function' && inputs[i].getAttribute('name') === 'copyNewAddrToBilling'){
inputs[i].checked = true;
break;
}
}
Pure Javascript, with no Element ID (#2):
document.querySelectorAll('.text input[name="copyNewAddrToBilling"]')[0].checked = true;
document.querySelector('.text input[name="copyNewAddrToBilling"]').checked = true;
Note that the querySelectorAll
and querySelector
methods are supported in these browsers: IE8+, Chrome 4+, Safari 3.1+, Firefox 3.5+ and all mobile browsers.
If the element may be missing, you should test for its existence, e.g.:
var input = document.querySelector('.text input[name="copyNewAddrToBilling"]');
if (!input) { return; }
With jQuery:
$('.text input[name="copyNewAddrToBilling"]').prop('checked', true);
This is how I made it without extra css or jquery:
<div class="form-group">
<div class="input-group">
<label class="sr-only" for="extra3">Extra name 3</label>
<input type="text" id="extra3" class="form-control" placeholder="Extra name">
<span class="input-group-addon">
<label class="checkbox-inline">
Mandatory? <input type="checkbox" id="inlineCheckbox5" value="option1">
</label>
</span>
<span class="input-group-addon">
<label class="checkbox-inline">
Per person? <input type="checkbox" id="inlineCheckbox6" value="option2">
</label>
</span>
<span class="input-group-addon">
To be paid?
<select>
<option value="online">Online</option>
<option value="on spot">On Spot</option>
</select>
</span>
</div>
</div>
found this:
-- Print contents of `tbl`, with indentation.
-- `indent` sets the initial level of indentation.
function tprint (tbl, indent)
if not indent then indent = 0 end
for k, v in pairs(tbl) do
formatting = string.rep(" ", indent) .. k .. ": "
if type(v) == "table" then
print(formatting)
tprint(v, indent+1)
elseif type(v) == 'boolean' then
print(formatting .. tostring(v))
else
print(formatting .. v)
end
end
end
from here https://gist.github.com/ripter/4270799
works pretty good for me...
to solve this problem you have to store result data before use it
$numRecords->execute();
$numRecords->store_result();
that's all
Assuming you're not writing a rubygem, Gemfile.lock should be in your repository. It's used as a snapshot of all your required gems and their dependencies. This way bundler doesn't have to recalculate all the gem dependencies each time you deploy, etc.
From cowboycoded's comment below:
If you are working on a gem, then DO NOT check in your Gemfile.lock. If you are working on a Rails app, then DO check in your Gemfile.lock.
Here's a nice article explaining what the lock file is.
You can write this query to get column name and all details without using INFORMATION_SCHEMA in MySql :
SHOW COLUMNS FROM database_Name.table_name;
You could use an <a>
tag with different styles:
a:link { }
a:visited { }
a:hover { }
a:active { }
I'd recommend using that in conjunction with CSS sprites: https://css-tricks.com/css-sprites/
Assuming a Windows installation, do please refer to this:
http://www.oracle-base.com/articles/misc/ManualOracleUninstall.php
- Uninstall all Oracle components using the Oracle Universal Installer (OUI).
- Run regedit.exe and delete the HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE key. This contains registry entires for all Oracle products.
- Delete any references to Oracle services left behind in the following part of the registry:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Ora*
It should be pretty obvious which ones relate to Oracle.- Reboot your machine.
- Delete the "C:\Oracle" directory, or whatever directory is your ORACLE_BASE.
- Delete the "C:\Program Files\Oracle" directory.
- Empty the contents of your "C:\temp" directory.
- Empty your recycle bin.
Calling additional attention to some great comments that were left here:
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\ORACLE
key from the registry.%ORACLE_HOME%
.%PATH%
.This set of instructions happens to match an almost identical process that I had reverse-engineered myself over the years after a few messed-up Oracle installs, and has almost always met the need.
Note that even if the OUI is no longer available or doesn't work, simply following the remaining steps should still be sufficient.
(Revision #7 reverted as to not misquote the original source, and to not remove credit to the other comments that contributed to the answer. Further edits are appreciated (and then please remove this comment), if a way can be found to maintain these considerations.)
Array.prototype.slice=function(start,end){
let res=[];
start=start||0;
end=end||this.length
for(let i=start;i<end;i++){
res.push(this[i])
}
return res;
}
when you do:
Array.prototype.slice.call(arguments)
arguments
becomes the value of this
in slice
,and then slice
returns an array
See: Python Sound ("Bell")
This helped me when i wanted to do the same.
All credits go to gbc
Have you tried :
import sys
sys.stdout.write('\a')
sys.stdout.flush()
That works for me here on Mac OS 10.5
Actually, I think your original attempt works also with a little modification:
print('\a')
(You just need the single quotes around the character sequence).
Yes it is possible. You need one ON for each join table.
LEFT JOIN ab
ON ab.sht = cd.sht
LEFT JOIN aa
ON aa.sht = cd.sht
Incidentally my personal formatting preference for complex SQL is described in http://bentilly.blogspot.com/2011/02/sql-formatting-style.html. If you're going to be writing a lot of this, it likely will help.
You will need to add quotes around the path to your babel file as below
"./node_modules/.bin/babel" --help
I am not sure if you can grab that IP from code that runs on the local machine.
You can however build code that runs on a website, say in JSP, and then use something that returns the IP of where the request came from:
request.getRemoteAddr()
Or simply use already-existing services that do this, then parse the answer from the service to find out the IP.
Use a webservice like AWS and others
import java.net.*;
import java.io.*;
URL whatismyip = new URL("http://checkip.amazonaws.com");
BufferedReader in = new BufferedReader(new InputStreamReader(
whatismyip.openStream()));
String ip = in.readLine(); //you get the IP as a String
System.out.println(ip);
You can use sheet.addMergedRegion(rowFrom,rowTo,colFrom,colTo);
example sheet.addMergedRegion(new CellRangeAddress(1,1,1,4));
will merge from B2 to E2. Remember it is zero based indexing (ex. POI version 3.12).
for detail refer BusyDeveloper's Guide
just go to google docs and paste this as a formula, where URL is a link to your img
=image("URL", 1)
afterwards, from google docs options, download for excel and you'll have your image on the cell EDIT Per comments, you dont need to keep the image URL alive that long, just long enough for the excel to download it. Then it will stay embedded on the file.
Anonymous ftp logins are usually the username 'anonymous' with the user's email address as the password. Some servers parse the password to ensure it looks like an email address.
User: anonymous
Password: [email protected]
If you change the format of the cells to General then this will show the date value of a cell as behind the scenes Excel saves a date as the number of days since 01/01/1900
If your date is text and you need to convert it then DATEVALUE
will do this:
a sleaker way to match special chars:
/\W|_/g
\W Matches any character that is not a word character (alphanumeric & underscore).
Underscore is considered a special character so add boolean to either match a special character or _
For any newcomers, as of April 2015, Android now has a SortedList class in the support library, designed specifically to work with RecyclerView
. Here's the blog post about it.
I know this answer is coming years after the fact and there is already a great JSP answer by Will Hartung, but there is Facelets, they are even mentioned in the answers from the linked question in the original question.
Facelets SO tag description
Facelets is an XML-based view technology for the JavaServer Faces framework. Designed specifically for JSF, Facelets is intended to be a simpler and more powerful alternative to JSP-based views. Initially a separate project, the technology was standardized as part of JSF 2.0 and Java-EE 6 and has deprecated JSP. Almost all JSF 2.0 targeted component libraries do not support JSP anymore, but only Facelets.
Sadly the best plain tutorial description I found was on Wikipedia and not a tutorial site. In fact the section describing templates even does along the lines of what the original question was asking for.
Due to the fact that Java-EE 6 has deprecated JSP I would recommend going with Facelets despite the fact that it looks like there might be more required for little to no gain over JSP.
It will create a table and copy all the data from old table to new table
SELECT * INTO event_log_temp FROM event_log
And you can clear the old table data.
DELETE FROM event_log
You can easily validate an XML file or tree against an XML Schema (XSD) with the xmlschema Python package. It's pure Python, available on PyPi and doesn't have many dependencies.
Example - validate a file:
import xmlschema
xmlschema.validate('doc.xml', 'some.xsd')
The method raises an exception if the file doesn't validate against the XSD. That exception then contains some violation details.
If you want to validate many files you only have to load the XSD once:
xsd = xmlschema.XMLSchema('some.xsd')
for filename in filenames:
xsd.validate(filename)
If you don't need the exception you can validate like this:
if xsd.is_valid('doc.xml'):
print('do something useful')
Alternatively, xmlschema directly works on file objects and in memory XML trees (either created with xml.etree.ElementTree or lxml). Example:
import xml.etree.ElementTree as ET
t = ET.parse('doc.xml')
result = xsd.is_valid(t)
print('Document is valid? {}'.format(result))
I received this error when I had a config file with <?php
on the second line instead of the first.
I guess this is what you are looking for?
Added an example:
The html:
<div class="example-date">
<span class="day">31</span>
<span class="month">July</span>
<span class="year">2009</span>
</div>
The css:
.year
{
display:block;
-webkit-transform: rotate(-90deg);
-moz-transform: rotate(-90deg);
filter: progid:DXImageTransform.Microsoft.BasicImage(rotation=3); //For IE support
}
Alle examples are from the mentioned site.
A pure virtual function is usually not (but can be) implemented in a base class and must be implemented in a leaf subclass.
You denote that fact by appending the "= 0" to the declaration, like this:
class AbstractBase
{
virtual void PureVirtualFunction() = 0;
}
Then you cannot declare and instantiate a subclass without it implementing the pure virtual function:
class Derived : public AbstractBase
{
virtual void PureVirtualFunction() override { }
}
By adding the override
keyword, the compiler will ensure that there is a base class virtual function with the same signature.
My problem was my recycler view looked like this
<android.support.v7.widget.RecyclerView
android:id="@+id/chatview"
android:layout_width="0dp"
android:layout_height="0dp"
app:layout_constraintTop_toTopOf="parent"
app:layout_constraintLeft_toLeftOf="parent"
app:layout_constraintRight_toRightOf="parent">
</android.support.v7.widget.RecyclerView>
When it should have looked like this
<android.support.v7.widget.RecyclerView
android:id="@+id/chatview"
android:layout_width="395dp"
android:layout_height="525dp"
android:layout_marginTop="52dp"
app:layout_constraintTop_toTopOf="parent"
tools:layout_editor_absoluteX="8dp"></android.support.v7.widget.RecyclerView>
</android.support.constraint.ConstraintLayout>
In Chrome 8 the path is always 'C:\fakepath\' with the correct file name.
127.0.0.1 restricts access on every interface on port 8000 except development computer. change it to 0.0.0.0:8000 this will allow connection from curl.
You can press vi}
to select the block surrounded with {}
brackets where your cursor is currently located.
It doesn't really matter where you are inside that block (just make sure you are in the outermost one). Also you can change {
to anything that has a pair like )
or ]
.
Another solution that doesn't require changing your existing code:
import Queue # Python 2.x
#from queue import Queue # Python 3.x
from threading import Thread
def foo(bar):
print 'hello {0}'.format(bar)
return 'foo'
que = Queue.Queue() # Python 2.x
#que = Queue() # Python 3.x
t = Thread(target=lambda q, arg1: q.put(foo(arg1)), args=(que, 'world!'))
t.start()
t.join()
result = que.get()
print result
It can be also easily adjusted to a multi-threaded environment:
import Queue # Python 2.x
#from queue import Queue # Python 3.x
from threading import Thread
def foo(bar):
print 'hello {0}'.format(bar)
return 'foo'
que = Queue.Queue() # Python 2.x
#que = Queue() # Python 3.x
threads_list = list()
t = Thread(target=lambda q, arg1: q.put(foo(arg1)), args=(que, 'world!'))
t.start()
threads_list.append(t)
# Add more threads here
...
threads_list.append(t2)
...
threads_list.append(t3)
...
# Join all the threads
for t in threads_list:
t.join()
# Check thread's return value
while not que.empty():
result = que.get()
print result
I would like to use the concatenate
and ravel
of the numpy
as below
import numpy as np
l = [[1, 2, 3], [4, 5, 6], [7], [8, 9]]
out = np.concatenate(np.array(l)).ravel()
What you want to do is separate the content of the table from the header of the table.
You want only the <th>
elements to be scrolled.
You can easily define this separation in HTML with the <tbody>
and the <thead>
elements.
Now the header and the body of the table are still connected to each other, they will still have the same width (and same scroll properties). Now to let them not 'work' as a table anymore you can set the display: block
. This way <thead>
and <tbody>
are separated.
table tbody, table thead
{
display: block;
}
Now you can set the scroll to the body of the table:
table tbody
{
overflow: auto;
height: 100px;
}
And last, because the <thead>
doesn't share the same width as the body anymore, you should set a static width to the header of the table:
th
{
width: 72px;
}
You should also set a static width for <td>
. This solves the issue of the unaligned columns.
td
{
width: 72px;
}
<tr>
element, that includes the header row:
<tr>
<th>head1</th>
<th>head2</th>
<th>head3</th>
<th>head4</th>
</tr>
I hope this is what you meant.
Addendum
If you would like to have more control over the column widths, have them to vary in width between each other, and course keep the header and body columns aligned, you can use the following example:
table th:nth-child(1), td:nth-child(1) { min-width: 50px; max-width: 50px; }
table th:nth-child(2), td:nth-child(2) { min-width: 100px; max-width: 100px; }
table th:nth-child(3), td:nth-child(3) { min-width: 150px; max-width: 150px; }
table th:nth-child(4), td:nth-child(4) { min-width: 200px; max-width: 200px; }
public static class SerializerDeserializerExtensions
{
public static byte[] Serializer(this object _object)
{
byte[] bytes;
using (var _MemoryStream = new MemoryStream())
{
IFormatter _BinaryFormatter = new BinaryFormatter();
_BinaryFormatter.Serialize(_MemoryStream, _object);
bytes = _MemoryStream.ToArray();
}
return bytes;
}
public static T Deserializer<T>(this byte[] _byteArray)
{
T ReturnValue;
using (var _MemoryStream = new MemoryStream(_byteArray))
{
IFormatter _BinaryFormatter = new BinaryFormatter();
ReturnValue = (T)_BinaryFormatter.Deserialize(_MemoryStream);
}
return ReturnValue;
}
}
You can use it like below code.
DataTable _DataTable = new DataTable();
_DataTable.Columns.Add(new DataColumn("Col1"));
_DataTable.Columns.Add(new DataColumn("Col2"));
_DataTable.Columns.Add(new DataColumn("Col3"));
for (int i = 0; i < 10; i++) {
DataRow _DataRow = _DataTable.NewRow();
_DataRow["Col1"] = (i + 1) + "Column 1";
_DataRow["Col2"] = (i + 1) + "Column 2";
_DataRow["Col3"] = (i + 1) + "Column 3";
_DataTable.Rows.Add(_DataRow);
}
byte[] ByteArrayTest = _DataTable.Serializer();
DataTable dt = ByteArrayTest.Deserializer<DataTable>();
Inside the input tag you can add autoFocus={true} for anyone using jsx/react.
<input
type="email"
name="email"
onChange={e => setEmail(e.target.value)}
value={email}
placeholder={"Email..."}
autoFocus={true}
/>
Might be cleaner to use PrintWriter
and its method println
.
Just make sure you close the writer when you're done
ldd
to list shared libraries for each executable.To find the answer for all executables in the "/bin" directory:
find /bin -type f -perm /a+x -exec ldd {} \; \
| grep so \
| sed -e '/^[^\t]/ d' \
| sed -e 's/\t//' \
| sed -e 's/.*=..//' \
| sed -e 's/ (0.*)//' \
| sort \
| uniq -c \
| sort -n
Change "/bin" above to "/" to search all directories.
Output (for just the /bin directory) will look something like this:
1 /lib64/libexpat.so.0
1 /lib64/libgcc_s.so.1
1 /lib64/libnsl.so.1
1 /lib64/libpcre.so.0
1 /lib64/libproc-3.2.7.so
1 /usr/lib64/libbeecrypt.so.6
1 /usr/lib64/libbz2.so.1
1 /usr/lib64/libelf.so.1
1 /usr/lib64/libpopt.so.0
1 /usr/lib64/librpm-4.4.so
1 /usr/lib64/librpmdb-4.4.so
1 /usr/lib64/librpmio-4.4.so
1 /usr/lib64/libsqlite3.so.0
1 /usr/lib64/libstdc++.so.6
1 /usr/lib64/libz.so.1
2 /lib64/libasound.so.2
2 /lib64/libblkid.so.1
2 /lib64/libdevmapper.so.1.02
2 /lib64/libpam_misc.so.0
2 /lib64/libpam.so.0
2 /lib64/libuuid.so.1
3 /lib64/libaudit.so.0
3 /lib64/libcrypt.so.1
3 /lib64/libdbus-1.so.3
4 /lib64/libresolv.so.2
4 /lib64/libtermcap.so.2
5 /lib64/libacl.so.1
5 /lib64/libattr.so.1
5 /lib64/libcap.so.1
6 /lib64/librt.so.1
7 /lib64/libm.so.6
9 /lib64/libpthread.so.0
13 /lib64/libselinux.so.1
13 /lib64/libsepol.so.1
22 /lib64/libdl.so.2
83 /lib64/ld-linux-x86-64.so.2
83 /lib64/libc.so.6
Edit - Removed "grep -P"
WKWebView using Swift in iOS 8..
The whole ViewController.swift file now looks like this:
import UIKit
import WebKit
class ViewController: UIViewController {
@IBOutlet var containerView : UIView! = nil
var webView: WKWebView?
override func loadView() {
super.loadView()
self.webView = WKWebView()
self.view = self.webView!
}
override func viewDidLoad() {
super.viewDidLoad()
var url = NSURL(string:"http://www.kinderas.com/")
var req = NSURLRequest(URL:url)
self.webView!.loadRequest(req)
}
override func didReceiveMemoryWarning() {
super.didReceiveMemoryWarning()
}
}
Today date:
$( ".selector" ).datepicker( "setDate", new Date());
// Or on the init
$( ".selector" ).datepicker({ defaultDate: new Date() });
15 days from today:
$( ".selector" ).datepicker( "setDate", 15);
// Or on the init
$( ".selector" ).datepicker({ defaultDate: 15 });
values timestampdiff (16, char(
timestamp(current timestamp + 1 year + 2 month - 3 day)-
timestamp(current timestamp)))
1
=
422
values timestampdiff (16, char(
timestamp('2012-03-08-00.00.00')-
timestamp('2011-12-08-00.00.00')))
1
=
90
---------- EDIT BY galador
SELECT TIMESTAMPDIFF(16, CHAR(CURRENT TIMESTAMP - TIMESTAMP_FORMAT(CHDLM, 'YYYYMMDD'))
FROM CHCART00
WHERE CHSTAT = '05'
EDIT
As it has been pointed out by X-Zero, this function returns only an estimate. This is true. For accurate results I would use the following to get the difference in days between two dates a and b:
SELECT days (current date) - days (date(TIMESTAMP_FORMAT(CHDLM, 'YYYYMMDD')))
FROM CHCART00
WHERE CHSTAT = '05';
If you want to use the back button, check this out. https://stackoverflow.com/questions/116446/what-is-the-best-back-button-jquery-plugin
Use document.location.href to change the page location, place it in the function on a successful ajax run.
Swift 5 Just call this function and pass your view
public func setViewSettingWithBgShade(view: UIView)
{
view.layer.cornerRadius = 8
view.layer.borderWidth = 1
view.layer.borderColor = AppTextFieldBorderColor.cgColor
//MARK:- Shade a view
view.layer.shadowOpacity = 0.5
view.layer.shadowOffset = CGSize(width: 1.0, height: 1.0)
view.layer.shadowRadius = 3.0
view.layer.shadowColor = UIColor.black.cgColor
view.layer.masksToBounds = false
}
hopefully this will save images form your webcam
#include <opencv2/core/core.hpp>
#include <opencv2/highgui/highgui.hpp>
#include <opencv2/imgproc/imgproc.hpp>
#include <iostream>
using namespace std;
using namespace cv;
int main()
{
VideoCapture cap(0);
Mat save_img;
cap >> save_img;
char Esc = 0;
while (Esc != 27 && cap.isOpened()) {
bool Frame = cap.read(save_img);
if (!Frame || save_img.empty()) {
cout << "error: frame not read from webcam\n";
break;
}
namedWindow("save_img", CV_WINDOW_NORMAL);
imshow("imgOriginal", save_img);
Esc = waitKey(1);
}
imwrite("test.jpg",save_img);
}
I use a mixture of float and overflow-x:hidden. Minimal code, always works.
https://jsfiddle.net/9934sc4d/4/ - PLUS you don't need to clear your float!
.left-half{
width:200px;
float:left;
}
.right-half{
overflow-x:hidden;
}
You can perform a simple each
loop on the range from 1 to `x´:
(1..x).each do |i|
#...
end
At the time you emit the very first line,
Artist Title Price Genre Disc Sale Tax Cash
to achieve "alignment", you have to know "in advance" how wide each column will need to be (otherwise, alignment is impossible). Once you do know the needed width for each column (there are several possible ways to achieve that depending on where your data's coming from), then the setw
function mentioned in the other answer will help, or (more brutally;-) you could emit carefully computed number of extra spaces (clunky, to be sure), etc. I don't recommend tabs anyway as you have no real control on how the final output device will render those, in general.
Back to the core issue, if you have each column's value in a vector<T>
of some sort, for example, you can do a first formatting pass to determine the maximum width of the column, for example (be sure to take into account the width of the header for the column, too, of course).
If your rows are coming "one by one", and alignment is crucial, you'll have to cache or buffer the rows as they come in (in memory if they fit, otherwise on a disk file that you'll later "rewind" and re-read from the start), taking care to keep updated the vector of "maximum widths of each column" as the rows do come. You can't output anything (not even the headers!), if keeping alignment is crucial, until you've seen the very last row (unless you somehow magically have previous knowledge of the columns' widths, of course;-).
Well it seems that you are missing a reference to some library. I had the similar error solved it by adding a reference to the #pragma comment(lib, "windowscodecs.lib")
If you are using jdk1.7.0_04, upgrade to jdk1.7.0_21. The problem has been fixed in that update.
If you want to do generic rounding of floats, instead of just trimming the last character:
var float1 = 12345.00,
float2 = 12345.4567,
float3 = 12345.982;
var MoreMath = {
/**
* Rounds a value to the specified number of decimals
* @param float value The value to be rounded
* @param int nrDecimals The number of decimals to round value to
* @return float value rounded to nrDecimals decimals
*/
round: function (value, nrDecimals) {
var x = nrDecimals > 0 ? 10 * parseInt(nrDecimals, 10) : 1;
return Math.round(value * x) / x;
}
}
MoreMath.round(float1, 1) => 12345.0
MoreMath.round(float2, 1) => 12345.5
MoreMath.round(float3, 1) => 12346.0
EDIT: Seems like there exists a built in function for this, as Paolo points out. That solution is obviously much cleaner than mine. Use parseFloat followed by toFixed
Just look at this solution, make sure you've turned access on to less secure apps on your google account :javax.mail.MessagingException: Could not connect to SMTP host: localhost, port: 25
try to use this one.
$(document).ready(function(){
$.ajax({
url: "yourPageWhereToLoadData.php",
success: function(data){
$("#dialog").html(data);
}
});
$("#dialog").dialog(
{
bgiframe: true,
autoOpen: false,
height: 100,
modal: true
}
);
});
Copy code using clone and appendTo function :
Here is also working example jsfiddle
<!DOCTYPE html>
<html>
<head>
<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.3/jquery.min.js"></script>
</head>
<body>
<div id="copy"><a href="http://brightwaay.com">Here</a> </div>
<br/>
<div id="copied"></div>
<script type="text/javascript">
$(function(){
$('#copy').clone().appendTo('#copied');
});
</script>
</body>
</html>
Don't specify the column or value when inserting and the DEFAULT constaint's value will be substituted for the missing value.
I don't know how this would work in a single column table. I mean: it would, but it wouldn't be very useful.
To make sure all possible ways of line breaks (Windows, Mac and Unix) are replaced you should use:
string.Replace("\r\n", "\n").Replace('\r', '\n').Replace('\n', 'replacement');
and in this order, to not to make extra line breaks, when you find some combination of line ending chars.
I recently stumbled upon this great Gist that gives a working implementation of a drag sort ListView
, with no external dependencies needed.
Basically it consists on creating your custom Adapter extending ArrayAdapter
as an inner class to the activity containing your ListView
. On this adapter one then sets an onTouchListener
to your List Items that will signal the start of the drag.
In that Gist they set the listener to a specific part of the layout of the List Item (the "handle" of the item), so one does not accidentally move it by pressing any part of it. Personally, I preferred to go with an onLongClickListener
instead, but that is up to you to decide. Here an excerpt of that part:
public class MyArrayAdapter extends ArrayAdapter<String> {
private ArrayList<String> mStrings = new ArrayList<String>();
private LayoutInflater mInflater;
private int mLayout;
//constructor, clear, remove, add, insert...
@Override
public View getView(final int position, View convertView, ViewGroup parent) {
ViewHolder holder;
View view = convertView;
//inflate, etc...
final String string = mStrings.get(position);
holder.title.setText(string);
// Here the listener is set specifically to the handle of the layout
holder.handle.setOnTouchListener(new View.OnTouchListener() {
@Override
public boolean onTouch(View view, MotionEvent motionEvent) {
if (motionEvent.getAction() == MotionEvent.ACTION_DOWN) {
startDrag(string);
return true;
}
return false;
}
});
// change color on dragging item and other things...
return view;
}
}
This also involves adding an onTouchListener
to the ListView
, which checks if an item is being dragged, handles the swapping and invalidation, and stops the drag state. An excerpt of that part:
mListView.setOnTouchListener(new View.OnTouchListener() {
@Override
public boolean onTouch(View view, MotionEvent event) {
if (!mSortable) { return false; }
switch (event.getAction()) {
case MotionEvent.ACTION_DOWN: {
break;
}
case MotionEvent.ACTION_MOVE: {
// get positions
int position = mListView.pointToPosition((int) event.getX(),
(int) event.getY());
if (position < 0) {
break;
}
// check if it's time to swap
if (position != mPosition) {
mPosition = position;
mAdapter.remove(mDragString);
mAdapter.insert(mDragString, mPosition);
}
return true;
}
case MotionEvent.ACTION_UP:
case MotionEvent.ACTION_CANCEL:
case MotionEvent.ACTION_OUTSIDE: {
//stop drag state
stopDrag();
return true;
}
}
return false;
}
});
Finally, here is how the stopDrag
and startDrag
methods look like, which handle the enabling and disabling of the drag process:
public void startDrag(String string) {
mPosition = -1;
mSortable = true;
mDragString = string;
mAdapter.notifyDataSetChanged();
}
public void stopDrag() {
mPosition = -1;
mSortable = false;
mDragString = null;
mAdapter.notifyDataSetChanged();
}
(^(\d{2})|^(\d{4})|^(\d{5}))$
This expression takes the number of length 2,4 and 5. Valid Inputs are 12 1234 12345
I think you want
listb.pop()[0]
The expression listb.pop
is a valid python expression which results in a reference to the pop
method, but doesn't actually call that method. You need to add the open and close parentheses to call the method.
You could try the search feature in pip,
$ pip search yaml
which looks for packages in PyPI with yaml in the short description. That reveals various packages, including PyYaml, yamltools, and PySyck, among others (Note that PySyck docs recommend using PyYaml, since syck is out of date). Now you know a specific package name, you can install it:
$ pip install pyyaml
If you want to install python yaml system-wide in linux, you can also use a package manager, like aptitude
or yum
:
$ sudo apt-get install python-yaml
$ sudo yum install python-yaml
atoi can do that for you
Example:
char string[] = "1234";
int sum = atoi( string );
printf("Sum = %d\n", sum ); // Outputs: Sum = 1234
Create a .vbs
file with this code:
CreateObject("Wscript.Shell").Run "your_batch.bat",0,True
This .vbs
will run your_batch.bat
hidden.
Works fine for me.
In many environments (e.g. Heroku), and as a convention, you can set the environment variable PORT
to tell your web server what port to listen on.
So process.env.PORT || 3000
means: whatever is in the environment variable PORT, or 3000 if there's nothing there.
So you pass that to app.listen
, or to app.set('port', ...)
, and that makes your server able to accept a "what port to listen on" parameter from the environment.
If you pass 3000
hard-coded to app.listen()
, you're always listening on port 3000, which might be just for you, or not, depending on your requirements and the requirements of the environment in which you're running your server.
This cannot be done with the native javascript dialog box, but a lot of javascript libraries include more flexible dialogs. You can use something like jQuery UI's dialog box for this.
See also these very similar questions:
Here's an example, as demonstrated in this jsFiddle:
<html><head>
<script type="text/javascript" src="http://code.jquery.com/jquery-1.7.1.js"></script>
<script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jqueryui/1.8.16/jquery-ui.js"></script>
<link rel="stylesheet" type="text/css" href="/css/normalize.css">
<link rel="stylesheet" type="text/css" href="/css/result-light.css">
<link rel="stylesheet" type="text/css" href="http://ajax.googleapis.com/ajax/libs/jqueryui/1.8.17/themes/base/jquery-ui.css">
</head>
<body>
<a class="checked" href="http://www.google.com">Click here</a>
<script type="text/javascript">
$(function() {
$('.checked').click(function(e) {
e.preventDefault();
var dialog = $('<p>Are you sure?</p>').dialog({
buttons: {
"Yes": function() {alert('you chose yes');},
"No": function() {alert('you chose no');},
"Cancel": function() {
alert('you chose cancel');
dialog.dialog('close');
}
}
});
});
});
</script>
</body><html>
I dislike "Don't" answers, but... don't.
make
's variables are global and are supposed to be evaluated during makefile's "parsing" stage, not during execution stage.
In this case, as long as the variable local to a single target, follow @nobar's answer and make it a shell variable.
Target-specific variables, too, are considered harmful by other make implementations: kati, Mozilla pymake. Because of them, a target can be built differently depending on if it's built standalone, or as a dependency of a parent target with a target-specific variable. And you won't know which way it was, because you don't know what is already built.
Compatibility with older browsers can be a drag, so be adviced.
If that is not a problem then go ahead. Run the snippet. Go to full page view and resize. Center will resize itself with no changes to the left or right divs.
Change left and right values to meet your requirement.
Thank you.
Hope this helps.
#container {_x000D_
display: flex;_x000D_
}_x000D_
_x000D_
.column.left {_x000D_
width: 100px;_x000D_
flex: 0 0 100px;_x000D_
}_x000D_
_x000D_
.column.right {_x000D_
width: 100px;_x000D_
flex: 0 0 100px;_x000D_
}_x000D_
_x000D_
.column.center {_x000D_
flex: 1;_x000D_
text-align: center;_x000D_
}_x000D_
_x000D_
.column.left,_x000D_
.column.right {_x000D_
background: orange;_x000D_
text-align: center;_x000D_
}
_x000D_
<div id="container">_x000D_
<div class="column left">this is left</div>_x000D_
<div class="column center">this is center</div>_x000D_
<div class="column right">this is right</div>_x000D_
</div>
_x000D_
new FileOutputStream(f)
will create a file in most cases, but unfortunately you will get a FileNotFoundException
if the file exists but is a directory rather than a regular file, does not exist but cannot be created, or cannot be opened for any other reason
I other word there might be plenty of cases where you would get FileNotFoundException meaning "Could not create your file", but you would not be able to find the reason of why the file creation failed.
A solution is to remove any call to the File API and use the Files API instead as it provides much better error handling. Typically replace any new FileOutputStream(f)
with Files.newOutputStream(p)
.
In cases where you do need to use the File API (because you use an external interface using File for example), using Files.createFile(p)
is a good way to make sure your file is created properly and if not you would know why it didn't work. Some people commented above that this is redundant. It is true, but you get better error handling which might be necessary in some cases.
I think this way is better
const index = projects.findIndex(project => project.value==='jquery-ui');
projects[index].desc = "updated desc";
Based on ahuth's answer;
Function AryLen(ary() As Variant, Optional idx_dim As Long = 1) As Long
If (Not ary) = -1 Then
AryLen = 0
Else
AryLen = UBound(ary, idx_dim) - LBound(ary, idx_dim) + 1
End If
End Function
Check for an empty array; is_empty = AryLen(some_array)=0
daniele3004's answer is already pretty good.
Just a quick and dirty formula for people like me who mixes up run
and start
from time to time:
docker run [...]
= docker pull [...]
+ docker start [...]
CircularProgressBarBlue.xaml
<UserControl
x:Class="CircularProgressBarBlue"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
Background="Transparent"
Name="progressBar">
<UserControl.Resources>
<Storyboard x:Key="spinning" >
<DoubleAnimation
Storyboard.TargetName="SpinnerRotate"
Storyboard.TargetProperty="(RotateTransform.Angle)"
From="0"
To="360"
RepeatBehavior="Forever"/>
</Storyboard>
</UserControl.Resources>
<Grid
x:Name="LayoutRoot"
Background="Transparent"
HorizontalAlignment="Center"
VerticalAlignment="Center">
<Image Source="C:\SpinnerImage\BlueSpinner.png" RenderTransformOrigin="0.5,0.5" VerticalAlignment="Stretch" HorizontalAlignment="Stretch">
<Image.RenderTransform>
<RotateTransform
x:Name="SpinnerRotate"
Angle="0"/>
</Image.RenderTransform>
</Image>
</Grid>
CircularProgressBarBlue.xaml.cs
using System;
using System.Windows;
using System.Windows.Media.Animation;
/// <summary>
/// Interaction logic for CircularProgressBarBlue.xaml
/// </summary>
public partial class CircularProgressBarBlue
{
private Storyboard _sb;
public CircularProgressBarBlue()
{
InitializeComponent();
StartStoryBoard();
IsVisibleChanged += CircularProgressBarBlueIsVisibleChanged;
}
void CircularProgressBarBlueIsVisibleChanged(object sender, DependencyPropertyChangedEventArgs e)
{
if (_sb == null) return;
if (e != null && e.NewValue != null && (((bool)e.NewValue)))
{
_sb.Begin();
_sb.Resume();
}
else
{
_sb.Stop();
}
}
void StartStoryBoard()
{
try
{
_sb = (Storyboard)TryFindResource("spinning");
if (_sb != null)
_sb.Begin();
}
catch
{ }
}
}
You can use an ActionFilterAttribute
public class BasicAuthAttribute : ActionFilterAttribute
{
public string BasicRealm { get; set; }
protected NetworkCredential Nc { get; set; }
public BasicAuthAttribute(string user,string pass)
{
this.Nc = new NetworkCredential(user,pass);
}
public override void OnActionExecuting(ActionExecutingContext filterContext)
{
var req = filterContext.HttpContext.Request;
var auth = req.Headers["Authorization"].ToString();
if (!String.IsNullOrEmpty(auth))
{
var cred = System.Text.Encoding.UTF8.GetString(Convert.FromBase64String(auth.Substring(6)))
.Split(':');
var user = new {Name = cred[0], Pass = cred[1]};
if (user.Name == Nc.UserName && user.Pass == Nc.Password) return;
}
filterContext.HttpContext.Response.Headers.Add("WWW-Authenticate",
String.Format("Basic realm=\"{0}\"", BasicRealm ?? "Ryadel"));
filterContext.Result = new UnauthorizedResult();
}
}
and add the attribute to your controller
[BasicAuth("USR", "MyPassword")]
The most common reason for this message seems to be unzipping the eclipse zip file wrongly (for instance unzipping without recreating the directory structure). Therefore please unzip the zipped Eclipse again with a good unzip tool (like 7-zip) and make sure that the necessary sub directories are created during the extraction.
Also make sure that the path to the unzipped Eclipse does not get very long. I've seen cases where Eclipse was unzipped into a deeply nested directory structure (to put it at some place into an SVN repository) and that led to the same error message.
If that still doesn't work, you may try launching eclipse.exe with administrative rights. That should not really be necessary, but maybe your access rights are somehow broken after the re-installation of Windows.
The best way is:
if ps -p $PID > /dev/null
then
echo "$PID is running"
# Do something knowing the pid exists, i.e. the process with $PID is running
fi
The problem with:
kill -0 $PID
is the exit code will be non-zero even if the pid is running and you dont have permission to kill it. For example:
kill -0 1
and
kill -0 $non-running-pid
have an indistinguishable (non-zero) exit code for a normal user, but the init process (PID 1) is certainly running.
The answers discussing kill and race conditions are exactly right if the body of the test is a "kill". I came looking for the general "how do you test for a PID existence in bash".
The /proc method is interesting, but in some sense breaks the spirit of the "ps" command abstraction, i.e. you dont need to go looking in /proc because what if Linus decides to call the "exe" file something else?
Use
npm uninstall <package_name>
Example to uninstall express
npm uninstall express
Because the bootstrap-select is a bootstrap component and therefore you need to include it in your code as you did for your V3
NOTE: this component only works in boostrap-4 since version 1.13.0
$('select').selectpicker();
_x000D_
<link rel="stylesheet" href="https://stackpath.bootstrapcdn.com/bootstrap/4.1.1/css/bootstrap.min.css">_x000D_
<link rel="stylesheet" href="https://cdnjs.cloudflare.com/ajax/libs/bootstrap-select/1.13.1/css/bootstrap-select.css" />_x000D_
<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>_x000D_
<script src="https://stackpath.bootstrapcdn.com/bootstrap/4.1.1/js/bootstrap.bundle.min.js"></script>_x000D_
<script src="https://cdnjs.cloudflare.com/ajax/libs/bootstrap-select/1.13.1/js/bootstrap-select.min.js"></script>_x000D_
_x000D_
_x000D_
_x000D_
<select class="selectpicker" multiple data-live-search="true">_x000D_
<option>Mustard</option>_x000D_
<option>Ketchup</option>_x000D_
<option>Relish</option>_x000D_
</select>
_x000D_
To help you with your problem I found this blog which talks about making laravel production optimized. Most of what you need to do to make your app fast would now be in the hands of how efficient your code is, your network capacity, CDN, caching, database.
Now I will talk about the issue:
Laravel is slow out of the box. There are ways to optimize it. You also have the option of using caching in your code, improving your server machine, yadda yadda yadda. But in the end Laravel is still slow.
Laravel uses a lot of symfony libraries and as you can see in techempower's benchmarks, symfony ranks very low (last to say the least). You can even find the laravel benchmark to be almost at the bottom.
A lot of auto-loading is happening in the background, things you might not even need gets loaded. So technically because laravel is easy to use, it helps you build apps fast, it also makes it slow.
But I am not saying Laravel is bad, it is great, great at a lot of things. But if you expect a high surge of traffic you will need a lot more hardware just to handle the requests. It would cost you a lot more. But if you are filthy rich then you can achieve anything with Laravel. :D
The usual trade-off:
Easy = Slow, Hard = Fast
I would consider C or Java to have a hard learning curve and a hard maintainability but it ranks very high in web frameworks.
Though not too related. I'm just trying to prove the point of easy = slow
:
Ruby has a very good reputation in maintainability and the easiness to learn it but it is also considered to be the slowest among python and php as shown here.
You can use this for header: Important: Put the following on your PHP pages that you want to include the content.
<?php
//at top:
require('header.php');
?>
<?php
// at bottom:
require('footer.php');
?>
You can also include a navbar globaly just use this instead:
<?php
// At top:
require('header.php');
?>
<?php
// At bottom:
require('footer.php');
?>
<?php
//Wherever navbar goes:
require('navbar.php');
?>
In header.php:
<!DOCTYPE html>
<html lang="en">
<head>
<meta charset="utf-8">
<meta name="viewport" content="width=device-width, initial-scale=1, shrink-to-fit=no">
</head>
<body>
Do Not close Body or Html tags!
Include html here:
<?php
//Or more global php here:
?>
Footer.php:
Code here:
<?php
//code
?>
Navbar.php:
<p> Include html code here</p>
<?php
//Include Navbar PHP code here
?>
The accepted answer still did not work for me
I used
git rm -r --cached .
git add .
git commit -m "fixing .gitignore"
Found the answer from here
PDFJet offers an open-source version of their library that should be able to handle any basic PDF generation task. It's a purely Java-based solution and it is stated to be compatible with Android. There is a commercial version with some additional features that does not appear to be too expensive.
The following takes any valid datetime value and returns the number of days in the associated month... it eliminates the ambiguity of both other answers...
// pass in any date as parameter anyDateInMonth
function daysInMonth(anyDateInMonth) {
return new Date(anyDateInMonth.getFullYear(),
anyDateInMonth.getMonth()+1,
0).getDate();}
This problem was solved by following steps -
You have empty $_POST
. If your web-server wants see data in json-format you need to read the raw input and then parse it with JSON decode.
You need something like that:
$json = file_get_contents('php://input');
$obj = json_decode($json);
Also you have wrong code for testing JSON-communication...
CURLOPT_POSTFIELDS
tells curl
to encode your parameters as application/x-www-form-urlencoded
. You need JSON-string here.
UPDATE
Your php code for test page should be like that:
$data_string = json_encode($data);
$ch = curl_init('http://webservice.local/');
curl_setopt($ch, CURLOPT_CUSTOMREQUEST, "POST");
curl_setopt($ch, CURLOPT_POSTFIELDS, $data_string);
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
curl_setopt($ch, CURLOPT_HTTPHEADER, array(
'Content-Type: application/json',
'Content-Length: ' . strlen($data_string))
);
$result = curl_exec($ch);
$result = json_decode($result);
var_dump($result);
Also on your web-service page you should remove one of the lines header('Content-type: application/json');
. It must be called only once.
If you are using python elasticsearch5 module or curl:
from python you do
es = elasticsearch5.Elasticsearch('my_host:my_port')
es.search(
index='my_index',
size=1,
sort='my_timestamp:desc'
)
If your documents are not inserted with any field that is of type datetime, then I don't believe you can get the N "most recent".
You do not specify your environment and version of Javascript (ECMAscript), and I realise this post was from 2009, but just for completeness, with the release of ECMA2018 we can now use the s
flag to cause .
to match '\n', see https://stackoverflow.com/a/36006948/141801
Thus:
let s = 'I am a string\nover several\nlines.';
console.log('String: "' + s + '".');
let r = /string.*several.*lines/s; // Note 's' modifier
console.log('Match? ' + r.test(s); // 'test' returns true
This is a recent addition and will not work in many current environments, for example Node v8.7.0 does not seem to recognise it, but it works in Chromium, and I'm using it in a Typescript test I'm writing and presumably it will become more mainstream as time goes by.
I did it this way. it's easy :)
Date d1 = jDateChooserFrom.getDate();
Date d2 = jDateChooserTo.getDate();
Calendar day1 = Calendar.getInstance();
day1.setTime(d1);
Calendar day2 = Calendar.getInstance();
day2.setTime(d2);
int from = day1.get(Calendar.DAY_OF_YEAR);
int to = day2.get(Calendar.DAY_OF_YEAR);
int difference = to-from;
DEMO : https://jsfiddle.net/ipsjolly/xygr065w/
$(function(){
$("#submit").click(function(){
alert($('input:radio:checked').val());
});
});
For example :
<div style="height:100px; width:100px; background:#000000"></div>
_x000D_
here.
you give css to div of height and width having 100px and background as black.
PS : try to avoid inline-css you can make external CSS and import in your html file.
you can refer here for CSS
hope this helps.
EDIT: Updated for jQuery 1.8
Since jQuery 1.8 browser specific transformations will be added automatically. jsFiddle Demo
var rotation = 0;
jQuery.fn.rotate = function(degrees) {
$(this).css({'transform' : 'rotate('+ degrees +'deg)'});
return $(this);
};
$('.rotate').click(function() {
rotation += 5;
$(this).rotate(rotation);
});
EDIT: Added code to make it a jQuery function.
For those of you who don't want to read any further, here you go. For more details and examples, read on. jsFiddle Demo.
var rotation = 0;
jQuery.fn.rotate = function(degrees) {
$(this).css({'-webkit-transform' : 'rotate('+ degrees +'deg)',
'-moz-transform' : 'rotate('+ degrees +'deg)',
'-ms-transform' : 'rotate('+ degrees +'deg)',
'transform' : 'rotate('+ degrees +'deg)'});
return $(this);
};
$('.rotate').click(function() {
rotation += 5;
$(this).rotate(rotation);
});
EDIT: One of the comments on this post mentioned jQuery Multirotation. This plugin for jQuery essentially performs the above function with support for IE8. It may be worth using if you want maximum compatibility or more options. But for minimal overhead, I suggest the above function. It will work IE9+, Chrome, Firefox, Opera, and many others.
Bobby... This is for the people who actually want to do it in the javascript. This may be required for rotating on a javascript callback.
Here is a jsFiddle.
If you would like to rotate at custom intervals, you can use jQuery to manually set the css instead of adding a class. Like this! I have included both jQuery options at the bottom of the answer.
HTML
<div class="rotate">
<h1>Rotatey text</h1>
</div>
CSS
/* Totally for style */
.rotate {
background: #F02311;
color: #FFF;
width: 200px;
height: 200px;
text-align: center;
font: normal 1em Arial;
position: relative;
top: 50px;
left: 50px;
}
/* The real code */
.rotated {
-webkit-transform: rotate(45deg); /* Chrome, Safari 3.1+ */
-moz-transform: rotate(45deg); /* Firefox 3.5-15 */
-ms-transform: rotate(45deg); /* IE 9 */
-o-transform: rotate(45deg); /* Opera 10.50-12.00 */
transform: rotate(45deg); /* Firefox 16+, IE 10+, Opera 12.10+ */
}
jQuery
Make sure these are wrapped in $(document).ready
$('.rotate').click(function() {
$(this).toggleClass('rotated');
});
Custom intervals
var rotation = 0;
$('.rotate').click(function() {
rotation += 5;
$(this).css({'-webkit-transform' : 'rotate('+ rotation +'deg)',
'-moz-transform' : 'rotate('+ rotation +'deg)',
'-ms-transform' : 'rotate('+ rotation +'deg)',
'transform' : 'rotate('+ rotation +'deg)'});
});
for(var key in object) {
console.log(object[key]);
}
There's no need to start idle transactions on the master. In postgresql-9.1 the most direct way to solve this problem is by setting
hot_standby_feedback = on
This will make the master aware of long-running queries. From the docs:
The first option is to set the parameter hot_standby_feedback, which prevents VACUUM from removing recently-dead rows and so cleanup conflicts do not occur.
Why isn't this the default? This parameter was added after the initial implementation and it's the only way that a standby can affect a master.
You give the name of your file, the path of the directory to search, and let it make the job.
private static String getPath(String drl, String whereIAm) {
File dir = new File(whereIAm); //StaticMethods.currentPath() + "\\src\\main\\resources\\" +
for(File e : dir.listFiles()) {
if(e.isFile() && e.getName().equals(drl)) {return e.getPath();}
if(e.isDirectory()) {
String idiot = getPath(drl, e.getPath());
if(idiot != null) {return idiot;}
}
}
return null;
}
The problem is the std namespace you are missing. cout
is in the std namespace.
Add using namespace std;
after the #include
I wasn't aware of a problem with setAttribute
in IE ? However you could directly set the expando property on the node itself:
hiddenInput.id = "uniqueIdentifier";
You can try viewport units (CSS3):
div {
height: 95vh;
width: 95vw;
}
I've solved this problem by configuring MySQL.
SET GLOBAL time_zone = '+3:00';
Probably you've found how to do it, but you can call
ListView.setItemsCanFocus(true)
and now your buttons will catch focus
Some advantages to the second option:
You can use this
inside onclick
to reference the anchor itself (doing the same in option 1 will give you window
instead).
You can set the href
to a non-JS compatible URL to support older browsers (or those that have JS disabled); browsers that support JavaScript will execute the function instead (to stay on the page you have to use onclick="return someFunction();"
and return false
from inside the function or onclick="return someFunction(); return false;"
to prevent default action).
I've seen weird stuff happen when using href="javascript:someFunction()"
and the function returns a value; the whole page would get replaced by just that value.
Pitfalls
Inline code:
Runs in document
scope as opposed to code defined inside <script>
tags which runs in window
scope; therefore, symbols may be resolved based on an element's name
or id
attribute, causing the unintended effect of attempting to treat an element as a function.
Is harder to reuse; delicate copy-paste is required to move it from one project to another.
Adds weight to your pages, whereas external code files can be cached by the browser.
Write the src tag for calling the js file as
<script type='text/javascript' src='../Users/myUserName/Desktop/myPage.js'></script>
This should work.