In addition to answer of @jww, I would like to say that the configuration in openssl-ca.cnf,
default_days = 1000 # How long to certify for
defines the default number of days the certificate signed by this root-ca will be valid. To set the validity of root-ca itself you should use '-days n' option in:
openssl req -x509 -days 3000 -config openssl-ca.cnf -newkey rsa:4096 -sha256 -nodes -out cacert.pem -outform PEM
Failing to do so, your root-ca will be valid for only the default one month and any certificate signed by this root CA will also have validity of one month.
I see you're having issues with the social share links. I had a similar issue at some point and found this question, but I don't see a complete answer for it. I hope my javascript resolution from below will help:
I had default sharing links that needed to be modified so that the URL that's being shared will have additional UTM parameters concatenated.
My example will be for the Facebook social share link, but it works for all the possible social sharing network links:
The URL that needed to be shared was:
https://mywebsitesite.com/blog/post-name
The default sharing link looked like:
$facebook_default = "https://www.facebook.com/sharer.php?u=https%3A%2F%2mywebsitesite.com%2Fblog%2Fpost-name%2F&t=hello"
I first DECODED it:
console.log( decodeURIComponent($facebook_default) );
=>
https://www.facebook.com/sharer.php?u=https://mywebsitesite.com/blog/post-name/&t=hello
Then I replaced the URL with the encoded new URL (with the UTM parameters concatenated):
console.log( decodeURIComponent($facebook_default).replace( window.location.href, encodeURIComponent(window.location.href+'?utm_medium=social&utm_source=facebook')) );
=>
https://www.facebook.com/sharer.php?u=https%3A%2F%mywebsitesite.com%2Fblog%2Fpost-name%2F%3Futm_medium%3Dsocial%26utm_source%3Dfacebook&t=2018
That's it!
Complete solution:
$facebook_default = $('a.facebook_default_link').attr('href');
$('a.facebook_default_link').attr( 'href', decodeURIComponent($facebook_default).replace( window.location.href, encodeURIComponent(window.location.href+'?utm_medium=social&utm_source=facebook')) );
I had the same error but in my case it was caused by mismatch in platform target settings. One library was set specifically to x86 while the main application was set to 'Any'...and then I moved my development to an x64 laptop.
As Joey pointed out, TortoiseSVN has a commandline syntax of its own. Unfortunately it is quite ugly, if you are used to svn
commands, and it ignores the current working directory, thus it is not very usable - except for scripting.
I have created a little Python program (tsvn
) which mimics the svn
commandline syntax as closely as possible and calls TortoiseSVN accordingly. Thus, the difference between calling the normal commandline tools and calling TortoiseSVN is reduced to a little letter t
at the beginning.
My tsvn
program is not yet complete but already useful. It can be found in the cheeseshop (https://pypi.python.org/pypi/tsvn/)
The solution was simply to comment the lines "work_mem=256MB" and "maintenance_work_mem=$3GB" in the file postgresql.conf and try to start the postgresql service. (start -> run -> services.msc) and look for the postgresql-[version] service then right click and start.
As mentioned above, BOOL is a signed char. bool - type from C99 standard (int).
BOOL - YES/NO. bool - true/false.
See examples:
bool b1 = 2;
if (b1) printf("REAL b1 \n");
if (b1 != true) printf("NOT REAL b1 \n");
BOOL b2 = 2;
if (b2) printf("REAL b2 \n");
if (b2 != YES) printf("NOT REAL b2 \n");
And result is
REAL b1
REAL b2
NOT REAL b2
Note that bool != BOOL. Result below is only ONCE AGAIN - REAL b2
b2 = b1;
if (b2) printf("ONCE AGAIN - REAL b2 \n");
if (b2 != true) printf("ONCE AGAIN - NOT REAL b2 \n");
If you want to convert bool to BOOL you should use next code
BOOL b22 = b1 ? YES : NO; //and back - bool b11 = b2 ? true : false;
So, in our case:
BOOL b22 = b1 ? 2 : NO;
if (b22) printf("ONCE AGAIN MORE - REAL b22 \n");
if (b22 != YES) printf("ONCE AGAIN MORE- NOT REAL b22 \n");
And so.. what we get now? :-)
You can add image to asp.net button. you dont need to use only image button or link button. When displaying button on browser, it is converting to html button as default. So you can use its "Style" properties for adding image. My example is below. I hope it works for you.
Style="background-image:url('Image/1.png');"
You can change image location with using
background-repeat
properties. So you can write a button like below:
<asp:Button ID="btnLogin" runat="server" Text="Login" Style="background-image:url('Image/1.png'); background-repeat:no-repeat"/>
Use bind_rows()
from the dplyr package:
bind_rows(list_of_dataframes, .id = "column_label")
You could use java-aes-crypto or Facebook's Conceal
java-aes-crypto
Quoting from the repo
A simple Android class for encrypting & decrypting strings, aiming to avoid the classic mistakes that most such classes suffer from.
Facebook's conceal
Quoting from the repo
Conceal provides easy Android APIs for performing fast encryption and authentication of data
Ones that are built using a recent webkit build, and Presto.
Safari 3.1 for webkit
Opera for Presto.
I'm pretty sure firefox will start supporting html5 partially in 3.1
All support is extremely partial. Check here for information on what is supported.
Make an object
$obj = json_decode(json_encode($need_to_json));
Show data from this $obj
$obj->{'needed'};
In case someone having a problem like i had. I was using the parenthesis with the return statement on the same line at which i had written the rest of the code. Also, i used map function and props so i got so many brackets. In this case, if you're new to React you can avoid the brackets around the props, because now everyone prefers to use the arrow functions. And in the map function you can also avoid the brackets around your function callback.
props.sample.map(function callback => (
));
like so. In above code sample you can see there is only opening parenthesis at the left of the function callback.
I had the same issue, my problem was that the firewall on the server wasn't open from the current ip address.
Actually, we really do not need to import any python library. We can separate the year, month, date using simple SQL. See the below example,
+----------+
| _c0|
+----------+
|1872-11-30|
|1873-03-08|
|1874-03-07|
|1875-03-06|
|1876-03-04|
|1876-03-25|
|1877-03-03|
|1877-03-05|
|1878-03-02|
|1878-03-23|
|1879-01-18|
I have a date column in my data frame which contains the date, month and year and assume I want to extract only the year from the column.
df.createOrReplaceTempView("res")
sqlDF = spark.sql("SELECT EXTRACT(year from `_c0`) FROM res ")
Here I'm creating a temporary view and store the year values using this single line and the output will be,
+-----------------------+
|year(CAST(_c0 AS DATE))|
+-----------------------+
| 1872|
| 1873|
| 1874|
| 1875|
| 1876|
| 1876|
| 1877|
| 1877|
| 1878|
| 1878|
| 1879|
| 1879|
| 1879|
doesnt directly answer your question. But helpful for those who want to start something after some time.
Future.delayed(Duration(seconds: 1), () {
print('yo hey');
});
You can use the assertThat
method and the Matchers that comes with JUnit.
Take a look at this link that describes a little bit about the JUnit Matchers.
Example:
public class BaseClass {
}
public class SubClass extends BaseClass {
}
Test:
import org.junit.Test;
import static org.hamcrest.CoreMatchers.instanceOf;
import static org.junit.Assert.assertThat;
/**
* @author maba, 2012-09-13
*/
public class InstanceOfTest {
@Test
public void testInstanceOf() {
SubClass subClass = new SubClass();
assertThat(subClass, instanceOf(BaseClass.class));
}
}
Use the following: Shift + Alt+(? or ?)
What about this :
substr($mystring.'/', 0, strpos($mystring, '/'))
Simply add a '/' to the end of mystring so you can be sure there is at least one ;)
Well, you pretty much gave yourself the answer. In your CSS give the containing element a min-width. If you have to support IE6 you can use the min-width-trick:
#container {
min-width:800px;
width: auto !important;
width:800px;
}
That will effectively give you 800px min-width in IE6 and any up-to-date browsers.
Very useful thing have applied today in my project. One div had to be aligned right, with no floating applied.
Applying code made my goal achieved:
.div {
margin-right: 0px;
margin-left: auto;
}
The apps UI only works for panels.
The best you can do is to draw a button yourself and put that into your spreadsheet. Than you can add a macro to it.
Go into "Insert > Drawing...", Draw a button and add it to the spreadsheet. Than click it and click "assign Macro...", then insert the name of the function you wish to execute there. The function must be defined in a script in the spreadsheet.
Alternatively you can also draw the button somewhere else and insert it as an image.
More info: https://developers.google.com/apps-script/guides/menus
If someone is looking for another option for Git Lab and the options above do not work, then we have another option. For a local installation of Git Lab server, we have found that the approach, below, allows us to include the package dependency. We generated and use an access token to do so.
$ npm install --save-dev https://git.yourdomain.com/userOrGroup/gitLabProjectName/repository/archive.tar.gz?private_token=InsertYourAccessTokenHere
Of course, if one is using an access key this way, it should have a limited set of permissions.
Good luck!
You should consider using a button for this. Links generally should be use for linking. Buttons can be used for other functionality you wish to add. Neals solution works, but its a workaround.
If you use a <button>
instead of a <a>
, your original code should work as expected.
Using EntityManager em;
public User getUserById(Long id) {
return em.getReference(User.class, id);
}
I'd strongly recommend using a library that automatically detects URLs in text and converts them to links. Try:
Both are under MIT license.
You can traverse each string in the list and even you can search in the whole generic using a single statement this makes searching easier.
public static void main(string[] args)
{
List names = new List();
names.Add(“Saurabh”);
names.Add("Garima");
names.Add(“Vivek”);
names.Add(“Sandeep”);
string stringResult = names.Find( name => name.Equals(“Garima”));
}
I think you need to add some context to your question. However, basic information about these things can be found here:
window.opener
https://developer.mozilla.org/en-US/docs/Web/API/Window.opener
I've used window.opener mostly when opening a new window that acted as a dialog which required user input, and needed to pass information back to the main window. However this is restricted by origin policy, so you need to ensure both the content from the dialog and the opener window are loaded from the same origin.
window.parent
https://developer.mozilla.org/en-US/docs/Web/API/Window.parent
I've used this mostly when working with IFrames that need to communicate with the window object that contains them.
window.top
https://developer.mozilla.org/en-US/docs/Web/API/Window.top
This is useful for ensuring you are interacting with the top level browser window. You can use it for preventing another site from iframing your website, among other things.
If you add some more detail to your question, I can supply other more relevant examples.
UPDATE:
There are a few ways you can handle your situation.
You have the following structure:
When Dialog 1 runs the code to open Dialog 2, after creating Dialog 2, have dialog 1 set a property on Dialog 2 that references the Dialog1 opener.
So if "childwindow" is you variable for the dialog 2 window object, and "window" is the variable for the Dialog 1 window object. After opening dialog 2, but before closing dialog 1 make an assignment similar to this:
childwindow.appMainWindow = window.opener
After making the assignment above, close dialog 1.
Then from the code running inside dialog2, you should be able to use
window.appMainWindow
to reference the main window, window object.
Hope this helps.
Reader they show at http://www.webqr.com/index.html works like a charm, but literaly, you need the one on the webpage, the github version it's really hard to make it work, however, it is possible. The best way to go is reverse-engineer the example shown at the webpage.
However, to edit and get the full potential out of it, it's not so easy. At some point I may post the stripped-down reverse-engineered QR reader, but in the meantime have some fun hacking the code.
Happy coding.
-- To Create or Replace a Table we must first silently Drop a Table that may not exist
DECLARE
table_not_exist EXCEPTION;
PRAGMA EXCEPTION_INIT (table_not_exist , -00942);
BEGIN
EXECUTE IMMEDIATE('DROP TABLE <SCHEMA>.<TABLE NAME> CASCADE CONSTRAINTS');
EXCEPTION WHEN table_not_exist THEN NULL;
END;
/
yourContext.Entry(yourEntity).Reload();
To understand the "encoding" attribute, you have to understand the difference between bytes and characters.
Think of bytes as numbers between 0 and 255, whereas characters are things like "a", "1" and "Ä". The set of all characters that are available is called a character set.
Each character has a sequence of one or more bytes that are used to represent it; however, the exact number and value of the bytes depends on the encoding used and there are many different encodings.
Most encodings are based on an old character set and encoding called ASCII which is a single byte per character (actually, only 7 bits) and contains 128 characters including a lot of the common characters used in US English.
For example, here are 6 characters in the ASCII character set that are represented by the values 60 to 65.
Extract of ASCII Table 60-65
+---------------------+
¦ Byte ¦ Character ¦
¦------+--------------¦
¦ 60 ¦ < ¦
¦ 61 ¦ = ¦
¦ 62 ¦ > ¦
¦ 63 ¦ ? ¦
¦ 64 ¦ @ ¦
¦ 65 ¦ A ¦
+---------------------+
In the full ASCII set, the lowest value used is zero and the highest is 127 (both of these are hidden control characters).
However, once you start needing more characters than the basic ASCII provides (for example, letters with accents, currency symbols, graphic symbols, etc.), ASCII is not suitable and you need something more extensive. You need more characters (a different character set) and you need a different encoding as 128 characters is not enough to fit all the characters in. Some encodings offer one byte (256 characters) or up to six bytes.
Over time a lot of encodings have been created. In the Windows world, there is CP1252, or ISO-8859-1, whereas Linux users tend to favour UTF-8. Java uses UTF-16 natively.
One sequence of byte values for a character in one encoding might stand for a completely different character in another encoding, or might even be invalid.
For example, in ISO 8859-1, â is represented by one byte of value 226
, whereas in UTF-8 it is two bytes: 195, 162
. However, in ISO 8859-1, 195, 162
would be two characters, Ã, ¢.
Think of XML as not a sequence of characters but a sequence of bytes.
Imagine the system receiving the XML sees the bytes 195, 162
. How does it know what characters these are?
In order for the system to interpret those bytes as actual characters (and so display them or convert them to another encoding), it needs to know the encoding used in the XML.
Since most common encodings are compatible with ASCII, as far as basic alphabetic characters and symbols go, in these cases, the declaration itself can get away with using only the ASCII characters to say what the encoding is. In other cases, the parser must try and figure out the encoding of the declaration. Since it knows the declaration begins with <?xml
it is a lot easier to do this.
Finally, the version
attribute specifies the XML version, of which there are two at the moment (see Wikipedia XML versions. There are slight differences between the versions, so an XML parser needs to know what it is dealing with. In most cases (for English speakers anyway), version 1.0 is sufficient.
my solution below:
<View style={style.aboutContent}>
<Text style={[styles.text,{textAlign:'justify'}]}>
// text here
</Text>
</View>
style:
aboutContent:{
flex:8,
width:widthDevice-40,
alignItems:'center'
},
text:{
fontSize:widthDevice*0.04,
color:'#fff',
fontFamily:'SairaSemiCondensed-Medium'
},
result: [
Is you are in bash shell:
for i in {1..1000}
do
echo "Welcome $i times"
done
See Samples Environment for Microsoft Chart Controls:
The samples environment for Microsoft Chart Controls for .NET Framework contains over 200 samples for both ASP.NET and Windows Forms. The samples cover every major feature in Chart Controls for .NET Framework. They enable you to see the Chart controls in action as well as use the code as templates for your own web and windows applications.
Seems to be more business oriented, but may be of some value to science students and scientists.
I just wanted to add some code here for people in the future since I was trying to export JSON to a CSV document and download it.
I use $.getJSON
to pull json data from an external page, but if you have a basic array, you can just use that.
This uses Christian Landgren's code to create the csv data.
$(document).ready(function() {
var JSONData = $.getJSON("GetJsonData.php", function(data) {
var items = data;
const replacer = (key, value) => value === null ? '' : value; // specify how you want to handle null values here
const header = Object.keys(items[0]);
let csv = items.map(row => header.map(fieldName => JSON.stringify(row[fieldName], replacer)).join(','));
csv.unshift(header.join(','));
csv = csv.join('\r\n');
//Download the file as CSV
var downloadLink = document.createElement("a");
var blob = new Blob(["\ufeff", csv]);
var url = URL.createObjectURL(blob);
downloadLink.href = url;
downloadLink.download = "DataDump.csv"; //Name the file here
document.body.appendChild(downloadLink);
downloadLink.click();
document.body.removeChild(downloadLink);
});
});
Edit: It's worth noting that JSON.stringify
will escape quotes in quotes by adding \"
. If you view the CSV in excel, it doesn't like that as an escape character.
You can add .replace(/\\"/g, '""')
to the end of JSON.stringify(row[fieldName], replacer)
to display this properly in excel (this will replace \"
with ""
which is what excel prefers).
Full Line: let csv = items.map(row => header.map(fieldName => (JSON.stringify(row[fieldName], replacer).replace(/\\"/g, '""'))).join(','));
This can also happen if you have a solution containing the project open in Visual Studio, then use your source control software to change to an older commit that does not contain that project. Normally, this would be obvious as all the project files would disappear as well. But, if it's a new project with very few or no files at all, it could be puzzling to see that just this one file, AssemblyInfo.cs
, is missing. And, it's more likely you'd be messing about with an AssemblyInfo.cs
when a project is new, so might miss that another file or two is also missing.
The cure is to do any of the following:
AssemblyInfo.cs
and any other missing files from another commit, taking care to manage and save your .csproj
file so the referenced files don't vanish from the project—perhaps by adding and removing a random .cs
file to cause changes to need to be saved (since visual studio thinks the .csproj file has been saved when it hasn't).AssemblyInfo.cs
file manually. Just copy another project, and change the details, especially the GUID so it matches the one from the .sln
file.When working with Angular the recent update to Angular 8 introduced that a static
property inside @ViewChild()
is required as stated here and here. Then your code would require this small change:
@ViewChild('one') d1:ElementRef;
into
// query results available in ngOnInit
@ViewChild('one', {static: true}) foo: ElementRef;
OR
// query results available in ngAfterViewInit
@ViewChild('one', {static: false}) foo: ElementRef;
keep dividing by ten until you get zero, then just output the number of divisions.
int intLen(int x)
{
if(!x) return 1;
int i;
for(i=0; x!=0; ++i)
{
x /= 10;
}
return i;
}
If you want to get the week number with the year, Grant Shannon's solution using strftime works, but you need to make some corrections for the dates around january 1st. For instance, 2016-01-03 (yyyy-mm-dd) is week 53 of year 2015, not 2016. And 2018-12-31 is week 1 of 2019, not of 2018. This codes provides some examples and a solution. In column "yearweek" the years are sometimes wrong, in "yearweek2" they are corrected (rows 2 and 5).
library(dplyr)
library(lubridate)
# create a testset
test <- data.frame(matrix(data = c("2015-12-31",
"2016-01-03",
"2016-01-04",
"2018-12-30",
"2018-12-31",
"2019-01-01") , ncol=1, nrow = 6 ))
# add a colname
colnames(test) <- "date_txt"
# this codes provides correct year-week numbers
test <- test %>%
mutate(date = as.Date(date_txt, format = "%Y-%m-%d")) %>%
mutate(yearweek = as.integer(strftime(date, format = "%Y%V"))) %>%
mutate(yearweek2 = ifelse(test = day(date) > 7 & substr(yearweek, 5, 6) == '01',
yes = yearweek + 100,
no = ifelse(test = month(date) == 1 & as.integer(substr(yearweek, 5, 6)) > 51,
yes = yearweek - 100,
no = yearweek)))
# print the result
print(test)
date_txt date yearweek yearweek2
1 2015-12-31 2015-12-31 201553 201553
2 2016-01-03 2016-01-03 201653 201553
3 2016-01-04 2016-01-04 201601 201601
4 2018-12-30 2018-12-30 201852 201852
5 2018-12-31 2018-12-31 201801 201901
6 2019-01-01 2019-01-01 201901 201901
If you need to set the new value based on the old field value that is do something like:
update my_table set field_1 = field_1 + 1 where pk_field = some_value
use query expressions:
MyModel.objects.filter(pk=some_value).update(field1=F('field1') + 1)
This will execute update atomically that is using one update request to the database without reading it first.
I believe this "callback" jargon has been mistakenly used in a lot of places. My definition would be something like:
A callback function is a function that you pass to someone and let them call it at some point of time.
I think people just read the first sentence of the wiki definition:
a callback is a reference to executable code, or a piece of executable code, that is passed as an argument to other code.
I've been working with lots of APIs, see various of bad examples. Many people tend to name a function pointer (a reference to executable code) or anonymous functions(a piece of executable code) "callback", if they are just functions why do you need another name for this?
Actually only the second sentence in wiki definition reveals the differences between a callback function and a normal function:
This allows a lower-level software layer to call a subroutine (or function) defined in a higher-level layer.
so the difference is who you are going to pass the function and how your passed in function is going to be called. If you just define a function and pass it to another function and called it directly in that function body, don't call it a callback. The definition says your passed in function is gonna be called by "lower-level" function.
I hope people can stop using this word in ambiguous context, it can't help people to understand better only worse.
As csgillespie said. stringsAsFactors is default on TRUE, which converts any text to a factor. So even after deleting the text, you still have a factor in your dataframe.
Now regarding the conversion, there's a more optimal way to do so. So I put it here as a reference :
> x <- factor(sample(4:8,10,replace=T))
> x
[1] 6 4 8 6 7 6 8 5 8 4
Levels: 4 5 6 7 8
> as.numeric(levels(x))[x]
[1] 6 4 8 6 7 6 8 5 8 4
To show it works.
The timings :
> x <- factor(sample(4:8,500000,replace=T))
> system.time(as.numeric(as.character(x)))
user system elapsed
0.11 0.00 0.11
> system.time(as.numeric(levels(x))[x])
user system elapsed
0 0 0
It's a big improvement, but not always a bottleneck. It gets important however if you have a big dataframe and a lot of columns to convert.
Have you looked into the BluetoothAdapter
Android class? You set up one device as a server and the other as a client. It may be possible (although I haven't looked into it myself) to connect multiple clients to the server.
I have had success connecting a BlueTooth audio device to a phone while it also had this BluetoothAdapter
connection to another phone, but I haven't tried with three phones. At least this tells me that the Bluetooth radio can tolerate multiple simultaneous connections :)
This is a summary of what worked for me:
Define a new function (wrapped $.ajax
to simplify):
jQuery.postCORS = function(url, data, func) {
if(func == undefined) func = function(){};
return $.ajax({
type: 'POST',
url: url,
data: data,
dataType: 'json',
contentType: 'application/x-www-form-urlencoded',
xhrFields: { withCredentials: true },
success: function(res) { func(res) },
error: function() {
func({})
}
});
}
Usage:
$.postCORS("https://example.com/service.json",{ x : 1 },function(obj){
if(obj.ok) {
...
}
});
Also works with .done
,.fail
,etc:
$.postCORS("https://example.com/service.json",{ x : 1 }).done(function(obj){
if(obj.ok) {
...
}
}).fail(function(){
alert("Error!");
});
Server side (in this case where example.com is hosted), set these headers (added some sample code in PHP):
header('Access-Control-Allow-Origin: https://not-example.com');
header('Access-Control-Allow-Credentials: true');
header('Access-Control-Max-Age: 604800');
header("Content-type: application/json");
$array = array("ok" => $_POST["x"]);
echo json_encode($array);
This is the only way I know to truly POST cross-domain from JS.
JSONP converts the POST into GET which may display sensitive information at server logs.
I had a different scenario, but still landed on this answer.
I had imported my root project folder containing multiple Maven projects but also some other stuff used in this project.
IntelliJ recognised the Java files, but didn't resolve the Maven dependencies.
I fixed this by performing a right-click on each pom and then "Add as maven project"
Here's another solution that uses some of VBA's built in date functions and stores all the date data in an array for comparison, which may give better performance if you get a lot of data:
Public Sub MoveData(MonthNum As Integer, FromSheet As Worksheet, ToSheet As Worksheet)
Const DateCol = "A" 'column where dates are store
Const DestCol = "A" 'destination column where dates are stored. We use this column to find the last populated row in ToSheet
Const FirstRow = 2 'first row where date data is stored
'Copy range of values to Dates array
Dates = FromSheet.Range(DateCol & CStr(FirstRow) & ":" & DateCol & CStr(FromSheet.Range(DateCol & CStr(FromSheet.Rows.Count)).End(xlUp).Row)).Value
Dim i As Integer
For i = LBound(Dates) To UBound(Dates)
If IsDate(Dates(i, 1)) Then
If Month(CDate(Dates(i, 1))) = MonthNum Then
Dim CurrRow As Long
'get the current row number in the worksheet
CurrRow = FirstRow + i - 1
Dim DestRow As Long
'get the destination row
DestRow = ToSheet.Range(DestCol & CStr(ToSheet.Rows.Count)).End(xlUp).Row + 1
'copy row CurrRow in FromSheet to row DestRow in ToSheet
FromSheet.Range(CStr(CurrRow) & ":" & CStr(CurrRow)).Copy ToSheet.Range(DestCol & CStr(DestRow))
End If
End If
Next i
End Sub
The limitation of execl is that when executing a shell command or any other script that is not in the current working directory, then we have to pass the full path of the command or the script. Example:
execl("/bin/ls", "ls", "-la", NULL);
The workaround to passing the full path of the executable is to use the function execlp, that searches for the file (1st argument of execlp) in those directories pointed by PATH:
execlp("ls", "ls", "-la", NULL);
Look at the find command.
What you are looking for is something like
find . -name "*.xls" -type f -exec program
Post edit
find . -name "*.xls" -type f -exec xls2csv '{}' '{}'.csv;
will execute xls2csv file.xls file.xls.csv
Closer to what you want.
You should call .addAnnotatedClass(Message.class)
on your AnnotationConfiguration
.
If you want your entities to be auto-discovered, use EntityManager
(JPA)
Update: it appears you have listed the class in hibernate.cfg.xml. So auto-discovery is not necessary. Btw, try javax.persistence.Entity
require 'json/ext' # to use the C based extension instead of json/pure
puts {hash: 123}.to_json
With the Material Components Library you can use the LinearProgressIndicator
with the app:indicatorColor
attribute to change the color:
<com.google.android.material.progressindicator.LinearProgressIndicator
app:indicatorColor="@color/..."
app:trackThickness="..."
app:trackColor="@color/..."
/>
Note: it requires at least the version 1.3.0-alpha04
.
With the ProgressBar
you can override the color using:
<ProgressBar
android:theme="@style/CustomProgressBarTheme"
..>
with:
<style name="CustomProgressBarTheme">
<item name="colorAccent">@color/primaryDarkColor</item>
</style>
Here is another approach using getter and setter functions for the model.
@Component({
selector: 'input-language',
template: `
…
<input
type="text"
placeholder="Language"
[(ngModel)]="query"
/>
`,
})
export class InputLanguageComponent {
set query(value) {
this._query = value;
console.log('query set to :', value)
}
get query() {
return this._query;
}
}
I used tmux-powerline to fully pimp my tmux status bar. I was googling for a way to change to background of the status bar when your typing a tmux command. When I stumbled on this post I thought I should mention it for completeness.
Update: This project is in a maintenance mode and no future functionality is likely to be added. tmux-powerline, with all other powerline projects, is replaced by the new unifying powerline. However this project is still functional and can serve as a lightweight alternative for non-python users.
Let's say you have these lines of code:
test line one
test line two
test line three
test line four
Using Search and Replace Ctrl+H with Regex let's find this: ^
and replace it with "
, we'll have this:
"test line one
"test line two
"test line three
"test line four
Now let's search this: $
and replace it with "
, now we'll have this:
"test line one"
"test line two"
"test line three"
"test line four"
First of all, you are in a bad position now - having the task of writing tests for the code you did not originally create and without any changes - nightmare! Talk to your boss and explain, it is not possible to test the code without making it "testable". To make code testable you usually do some important changes;
Regarding private variables. You actually never should do that. Aiming to test private variables is the first sign that something wrong with the current design. Private variables are part of the implementation, tests should focus on behavior rather of implementation details.
Sometimes, private field are exposed to public access with some getter. I do that, but try to avoid as much as possible (mark in comments, like 'used for testing').
Since you have no possibility to change the code, I don't see possibility (I mean real possibility, not like Reflection hacks etc.) to check private variable.
A similar question is: Mapping a NumPy array in place. If you can find a ufunc for your f(), then you should use the out parameter.
When I was using the below command, I too was getting the same error:
node .function-hello.js
I changed my command to below command, it worked fine:
node .\function-hello.js
Why flex vs. display: inline-block
?
Why negative margin?
Either you use SCSS or CSS-in-JS for the edge cases (i.e. first element in column), or you set a default margin and get rid of the outer margin later.
https://codepen.io/zurfyx/pen/BaBWpja
<div class="outerContainer">
<div class="container">
<div class="elementContainer">
<div class="element">
</div>
</div>
...
</div>
</div>
:root {
--columns: 2;
--betweenColumns: 20px; /* This value is doubled when no margin collapsing */
}
.outerContainer {
overflow: hidden; /* Hide the negative margin */
}
.container {
background-color: grey;
display: flex;
flex-wrap: wrap;
margin: calc(-1 * var(--betweenColumns));
}
.elementContainer {
display: flex; /* To prevent margin collapsing */
width: calc(1/var(--columns) * 100% - 2 * var(--betweenColumns));
margin: var(--betweenColumns);
}
.element {
display: flex;
border: 1px solid red;
background-color: yellow;
width: 100%;
height: 42px;
}
This is the ternary conditional operator, which can be used anywhere, not just the print statement. It's sometimes just called "the ternary operator", but it's not the only ternary operator, just the most common one.
Here's a good example from Wikipedia demonstrating how it works:
A traditional if-else construct in C, Java and JavaScript is written:
if (a > b) { result = x; } else { result = y; }
This can be rewritten as the following statement:
result = a > b ? x : y;
Basically it takes the form:
boolean statement ? true result : false result;
So if the boolean statement is true, you get the first part, and if it's false you get the second one.
Try these if that still doesn't make sense:
System.out.println(true ? "true!" : "false.");
System.out.println(false ? "true!" : "false.");
If for
loops are on short supply, here's what I like to use:
$s = substr(str_shuffle(str_repeat("0123456789abcdefghijklmnopqrstuvwxyz", 5)), 0, 5);
user.no_of_logins += 1
session.commit()
Convert numbers to words:
Here is an example in which numbers have been converted into words using the dictionary.
string = input("Enter a string: ")
my_dict = {'0': 'zero', '1': 'one', '2': 'two', '3': 'three', '4': 'four', '5': 'five', '6': 'six', '7': 'seven', '8': 'eight', '9': 'nine'}
for item in string:
if item in my_dict.keys():
string = string.replace(item, my_dict[item])
print(string)
This solution I found seemed a little easier to follow then some of the other ones.
Taking:
p1 and p2 as the points for the line, and
c as the center point for the circle and r for the radius
I would solve for the equation of the line in slope-intercept form. However, I didn't want to have to deal with difficult equations with c
as a point, so I just shifted the coordinate system over so that the circle is at 0,0
p3 = p1 - c
p4 = p2 - c
By the way, whenever I subtract points from each other I am subtracting the x
's and then subtracting the y
's, and putting them into a new point, just in case someone didn't know.
Anyway, I now solve for the equation of the line with p3
and p4
:
m = (p4_y - p3_y) / (p4_x - p3) (the underscore is an attempt at subscript)
y = mx + b
y - mx = b (just put in a point for x and y, and insert the m we found)
Ok. Now I need to set these equations equal. First I need to solve the circle's equation for x
x^2 + y^2 = r^2
y^2 = r^2 - x^2
y = sqrt(r^2 - x^2)
Then I set them equal:
mx + b = sqrt(r^2 - x^2)
And solve for the quadratic equation (0 = ax^2 + bx + c
):
(mx + b)^2 = r^2 - x^2
(mx)^2 + 2mbx + b^2 = r^2 - x^2
0 = m^2 * x^2 + x^2 + 2mbx + b^2 - r^2
0 = (m^2 + 1) * x^2 + 2mbx + b^2 - r^2
Now I have my a
, b
, and c
.
a = m^2 + 1
b = 2mb
c = b^2 - r^2
So I put this into the quadratic formula:
(-b ± sqrt(b^2 - 4ac)) / 2a
And substitute in by values then simplify as much as possible:
(-2mb ± sqrt(b^2 - 4ac)) / 2a
(-2mb ± sqrt((-2mb)^2 - 4(m^2 + 1)(b^2 - r^2))) / 2(m^2 + 1)
(-2mb ± sqrt(4m^2 * b^2 - 4(m^2 * b^2 - m^2 * r^2 + b^2 - r^2))) / 2m^2 + 2
(-2mb ± sqrt(4 * (m^2 * b^2 - (m^2 * b^2 - m^2 * r^2 + b^2 - r^2))))/ 2m^2 + 2
(-2mb ± sqrt(4 * (m^2 * b^2 - m^2 * b^2 + m^2 * r^2 - b^2 + r^2)))/ 2m^2 + 2
(-2mb ± sqrt(4 * (m^2 * r^2 - b^2 + r^2)))/ 2m^2 + 2
(-2mb ± sqrt(4) * sqrt(m^2 * r^2 - b^2 + r^2))/ 2m^2 + 2
(-2mb ± 2 * sqrt(m^2 * r^2 - b^2 + r^2))/ 2m^2 + 2
(-2mb ± 2 * sqrt(m^2 * r^2 + r^2 - b^2))/ 2m^2 + 2
(-2mb ± 2 * sqrt(r^2 * (m^2 + 1) - b^2))/ 2m^2 + 2
This is almost as far as it will simplify. Finally, separate out to equations with the ±:
(-2mb + 2 * sqrt(r^2 * (m^2 + 1) - b^2))/ 2m^2 + 2 or
(-2mb - 2 * sqrt(r^2 * (m^2 + 1) - b^2))/ 2m^2 + 2
Then simply plug the result of both of those equations into the x
in mx + b
. For clarity, I wrote some JavaScript code to show how to use this:
function interceptOnCircle(p1,p2,c,r){
//p1 is the first line point
//p2 is the second line point
//c is the circle's center
//r is the circle's radius
var p3 = {x:p1.x - c.x, y:p1.y - c.y} //shifted line points
var p4 = {x:p2.x - c.x, y:p2.y - c.y}
var m = (p4.y - p3.y) / (p4.x - p3.x); //slope of the line
var b = p3.y - m * p3.x; //y-intercept of line
var underRadical = Math.pow((Math.pow(r,2)*(Math.pow(m,2)+1)),2)-Math.pow(b,2)); //the value under the square root sign
if (underRadical < 0){
//line completely missed
return false;
} else {
var t1 = (-2*m*b+2*Math.sqrt(underRadical))/(2 * Math.pow(m,2) + 2); //one of the intercept x's
var t2 = (-2*m*b-2*Math.sqrt(underRadical))/(2 * Math.pow(m,2) + 2); //other intercept's x
var i1 = {x:t1,y:m*t1+b} //intercept point 1
var i2 = {x:t2,y:m*t2+b} //intercept point 2
return [i1,i2];
}
}
I hope this helps!
P.S. If anyone finds any errors or has any suggestions, please comment. I am very new and welcome all help/suggestions.
For MYSQL
ALTER TABLE myTable MODIFY myColumn {DataType} NULL
This error occurs because you are using a normal string as a path. You can use one of the three following solutions to fix your problem:
1: Just put r
before your normal string it converts normal string to raw string:
pandas.read_csv(r"C:\Users\DeePak\Desktop\myac.csv")
2:
pandas.read_csv("C:/Users/DeePak/Desktop/myac.csv")
3:
pandas.read_csv("C:\\Users\\DeePak\\Desktop\\myac.csv")
No, prior to Oracle version 12.2, identifiers are not allowed to exceed 30 characters in length. See the Oracle SQL Language Reference.
However, from version 12.2 they can be up to 128 bytes long. (Note: bytes, not characters).
Not only does std::vector make a copy of whatever you're pushing back, but the definition of the collection states that it will do so, and that you may not use objects without the correct copy semantics within a vector. So, for example, you do not use auto_ptr in a vector.
I answered this question and no you do not need an arraylist or any other thing this was an assignment and I completed it so yes arrays can increase in size. Here is the link How to use Java Dynamic Array and here is the link for my question which i answered Java Dynamic arrays
Override setPrimaryItem()
in the FragmentPagerAdapter
subclass. I use this method, and it works well.
@Override
public void setPrimaryItem(ViewGroup container, int position, Object object) {
// This is what calls setMenuVisibility() on the fragments
super.setPrimaryItem(container, position, object);
if (object instanceof MyWhizBangFragment) {
MyWhizBangFragment fragment = (MyWhizBangFragment) object;
fragment.doTheThingYouNeedToDoOnBecomingVisible();
}
}
If you want a stack trace which looks very similar to how php formats the exception stack trace than use this function I wrote:
function debug_backtrace_string() {
$stack = '';
$i = 1;
$trace = debug_backtrace();
unset($trace[0]); //Remove call to this function from stack trace
foreach($trace as $node) {
$stack .= "#$i ".$node['file'] ."(" .$node['line']."): ";
if(isset($node['class'])) {
$stack .= $node['class'] . "->";
}
$stack .= $node['function'] . "()" . PHP_EOL;
$i++;
}
return $stack;
}
This will return a stack trace formatted like this:
#1 C:\Inetpub\sitename.com\modules\sponsors\class.php(306): filePathCombine()
#2 C:\Inetpub\sitename.com\modules\sponsors\class.php(294): Process->_deleteImageFile()
#3 C:\Inetpub\sitename.com\VPanel\modules\sponsors\class.php(70): Process->_deleteImage()
#4 C:\Inetpub\sitename.com\modules\sponsors\process.php(24): Process->_delete()
Not so long ago I made some trick to have enums properly displayed in QComboBox and to have definition of enum and string representations as one statement
#pragma once
#include <boost/unordered_map.hpp>
namespace enumeration
{
struct enumerator_base : boost::noncopyable
{
typedef
boost::unordered_map<int, std::wstring>
kv_storage_t;
typedef
kv_storage_t::value_type
kv_type;
kv_storage_t const & kv() const
{
return storage_;
}
LPCWSTR name(int i) const
{
kv_storage_t::const_iterator it = storage_.find(i);
if(it != storage_.end())
return it->second.c_str();
return L"empty";
}
protected:
kv_storage_t storage_;
};
template<class T>
struct enumerator;
template<class D>
struct enum_singleton : enumerator_base
{
static enumerator_base const & instance()
{
static D inst;
return inst;
}
};
}
#define QENUM_ENTRY(K, V, N) K, N storage_.insert(std::make_pair((int)K, V));
#define QBEGIN_ENUM(NAME, C) \
enum NAME \
{ \
C \
} \
}; \
} \
#define QEND_ENUM(NAME) \
}; \
namespace enumeration \
{ \
template<> \
struct enumerator<NAME>\
: enum_singleton< enumerator<NAME> >\
{ \
enumerator() \
{
//usage
/*
QBEGIN_ENUM(test_t,
QENUM_ENTRY(test_entry_1, L"number uno",
QENUM_ENTRY(test_entry_2, L"number dos",
QENUM_ENTRY(test_entry_3, L"number tres",
QEND_ENUM(test_t)))))
*/
Now you've got enumeration::enum_singleton<your_enum>::instance()
able to convert enums to strings. If you replace kv_storage_t
with boost::bimap
, you will also be able to do backward conversion.
Common base class for converter was introduced to store it in Qt object, because Qt objects couldn't be templates
From Activity#showDialog(int)
:
This method is deprecated.
Use the newDialogFragment
class withFragmentManager
instead; this is also available on older platforms through the Android compatibility package.
I ran across this error recently using a javascript library which changes the parameters of a function based on conditions.
You can test an object to see if it has the function. I would only do this in scenarios where you don't control what is getting passed to you.
if( param.indexOf != undefined ) {
// we have a string or other object that
// happens to have a function named indexOf
}
You can test this in your browser console:
> (3).indexOf == undefined;
true
> "".indexOf == undefined;
false
Let me show you another way that works 100%. I will also add some padding for the example.
<div class = "container">
<div class = "flex-pad-x">
<div class = "flex-pad-y">
<div class = "flex-pad-y">
<div class = "flex-grow-y">
Content Centered
</div>
</div>
</div>
</div>
</div>
.container {
position: fixed;
top: 0px;
left: 0px;
bottom: 0px;
right: 0px;
width: 100%;
height: 100%;
}
.flex-pad-x {
padding: 0px 20px;
height: 100%;
display: flex;
}
.flex-pad-y {
padding: 20px 0px;
width: 100%;
display: flex;
flex-direction: column;
}
.flex-grow-y {
flex-grow: 1;
display: flex;
justify-content: center;
align-items: center;
flex-direction: column;
}
As you can see we can achieve this with a few wrappers for control while utilising the flex-grow & flex-direction attribute.
1: When the parent "flex-direction" is a "row", its child "flex-grow" works horizontally. 2: When the parent "flex-direction" is "columns", its child "flex-grow" works vertically.
Hope this helps
Daniel
BEGIN TRY
INSERT INTO YourTable (col1, col2) VALUES (@val1, @val2)
END TRY
BEGIN CATCH
--print or insert into error log or return param or etc...
PRINT '@val1='+ISNULL(CONVERT(varchar,@val1),'')
PRINT '@val2='+ISNULL(CONVERT(varchar,@val2),'')
END CATCH
Since 2.3 version of Gson library the JsonArray class have a 'set' method.
Here's an simple example:
JsonArray array = new JsonArray();
array.add(new JsonPrimitive("Red"));
array.add(new JsonPrimitive("Green"));
array.add(new JsonPrimitive("Blue"));
array.remove(2);
array.set(0, new JsonPrimitive("Yelow"));
you need double quotes in all your three if
statements, eg.:
IF "%a%"=="2" (
@echo OFF &SETLOCAL ENABLEDELAYEDEXPANSION
cls
title ~USB Wizard~
echo What do you want to do?
echo 1.Enable/Disable USB Storage Devices.
echo 2.Enable/Disable Writing Data onto USB Storage.
echo 3.~Yet to come~.
set "a=%globalparam1%"
goto :aCheck
:aPrompt
set /p "a=Enter Choice: "
:aCheck
if "%a%"=="" goto :aPrompt
echo %a%
IF "%a%"=="2" (
title USB WRITE LOCK
echo What do you want to do?
echo 1.Apply USB Write Protection
echo 2.Remove USB Write Protection
::param1
set "param1=%globalparam2%"
goto :param1Check
:param1Prompt
set /p "param1=Enter Choice: "
:param1Check
if "!param1!"=="" goto :param1Prompt
if "!param1!"=="1" (
REG ADD HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies\ /v WriteProtect /t REG_DWORD /d 00000001
USB Write is Locked!
)
if "!param1!"=="2" (
REG ADD HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies\ /v WriteProtect /t REG_DWORD /d 00000000
USB Write is Unlocked!
)
)
pause
For OpenJDK 8 on Linux see: https://askubuntu.com/questions/755853/how-to-install-jdk-sources
The way that worked for me is:
src.zip
is a symbolic link pointing to a non-existing folder ...sudo apt-get install openjdk-8-source
this adds this folderlocate "src.zip"
Window --> Preferences --> Java --> "Installed JREs"
, edit and point to src.zip
(or open any JRE class like for example HashMap and attach source)You should now see the JavaDoc when opening JRE classes via Ctrl+Shift+t, previously this was not possible, Eclipse may have got a docs from the default URL on mouse over methods but this requires a stable internet connection.
mylist[c(5,7,9)]
should do it.
You want the sublists returned as sublists of the result list; you don't use [[]]
(or rather, the function is [[
) for that -- as Dason mentions in comments, [[
grabs the element.
Use the bash built-in variable SECONDS
. Each time you reference the variable it will return the elapsed time since the script invocation.
Example:
echo "Start $SECONDS"
sleep 10
echo "Middle $SECONDS"
sleep 10
echo "End $SECONDS"
Output:
Start 0
Middle 10
End 20
Yet another approach is ISNULL().
UPDATE [DATABASE].[dbo].[TABLE_NAME]
SET
[ABC] = ISNULL(@ABC, [ABC]),
[ABCD] = ISNULL(@ABCD, [ABCD])
The difference between ISNULL and COALESCE is the return type. COALESCE can also take more than 2 arguments, and use the first that is not null. I.e.
select COALESCE(null, null, 1, 'two') --returns 1
select COALESCE(null, null, null, 'two') --returns 'two'
The SQL Server Maximums are disclosed http://msdn.microsoft.com/en-us/library/ms143432.aspx (this is the 2008 version)
A SQL Query can be a varchar(max) but is shown as limited to 65,536 * Network Packet size, but even then what is most likely to trip you up is the 2100 parameters per query. If SQL chooses to parameterize the literal values in the in clause, I would think you would hit that limit first, but I havn't tested it.
Edit : Test it, even under forced parameteriztion it survived - I knocked up a quick test and had it executing with 30k items within the In clause. (SQL Server 2005)
At 100k items, it took some time then dropped with:
Msg 8623, Level 16, State 1, Line 1 The query processor ran out of internal resources and could not produce a query plan. This is a rare event and only expected for extremely complex queries or queries that reference a very large number of tables or partitions. Please simplify the query. If you believe you have received this message in error, contact Customer Support Services for more information.
So 30k is possible, but just because you can do it - does not mean you should :)
Edit : Continued due to additional question.
50k worked, but 60k dropped out, so somewhere in there on my test rig btw.
In terms of how to do that join of the values without using a large in clause, personally I would create a temp table, insert the values into that temp table, index it and then use it in a join, giving it the best opportunities to optimse the joins. (Generating the index on the temp table will create stats for it, which will help the optimiser as a general rule, although 1000 GUIDs will not exactly find stats too useful.)
Thanks for the tip Rodger.
For me it worked as below:
@echo off
start /d "" IEXPLORE.EXE www.google.com
start /d "" IEXPLORE.EXE www.yahoo.com
With the settings in Internet Explorer 8:
You may only want to know the execution time of parts of your script. The most flexible way to time parts or an entire script is to create 3 simple functions (procedural code given here but you could turn it into a class by putting class timer{} around it and making a couple of tweaks). This code works, just copy and paste and run:
$tstart = 0;
$tend = 0;
function timer_starts()
{
global $tstart;
$tstart=microtime(true); ;
}
function timer_ends()
{
global $tend;
$tend=microtime(true); ;
}
function timer_calc()
{
global $tstart,$tend;
return (round($tend - $tstart,2));
}
timer_starts();
file_get_contents('http://google.com');
timer_ends();
print('It took '.timer_calc().' seconds to retrieve the google page');
Floating point calculations are not exact - there is often round-off errors, and errors due to representation. (For example, 0.1 cannot be exactly represented in binary floating point.)
Because of this, directly comparing two floating point values for equality is usually not a good idea, because they can be different by a small amount, depending upon how they were computed.
The "delta", as it's called in the JUnit javadocs, describes the amount of difference you can tolerate in the values for them to be still considered equal. The size of this value is entirely dependent upon the values you're comparing. When comparing doubles, I typically use the expected value divided by 10^6.
Update: For a better approach, please refer to Blackus's answer in the same thread.
If you are not averse to using JavaScript and Regex, you can use the below solution to find all width
and height
properties in the style
attribute and replace
them with nothing.
//Get the value of style attribute based on element's Id
var originalStyle = document.getElementById('sample_id').getAttribute('style');
var regex = new RegExp(/(width:|height:).+?(;[\s]?|$)/g);
//Replace matches with null
var modStyle = originalStyle.replace(regex, "");
//Set the modified style value to element using it's Id
document.getElementById('sample_id').setAttribute('style', modStyle);
ALTER TABLE [dbo].[TableName]
ALTER COLUMN ColumnName VARCHAR(Max) NULL
The for
attribute shows that this label stands for related input field, or check box or radio button or any other data entering field associated with it.
for example
<li>
<label>{translate:blindcopy}</label>
<a class="" href="#" title="{translate:savetemplate}" onclick="" ><i class="fa fa-list" class="button" ></i></a>  
<input type="text" id="BlindCopy" name="BlindCopy" class="splitblindcopy" />
</li>
git push --tags production
Try this
frame$twohouses <- ifelse(frame$data>1, 2, 1)
frame
data twohouses
1 0 1
2 1 1
3 2 2
4 3 2
5 4 2
6 2 2
7 3 2
8 1 1
9 4 2
10 3 2
11 2 2
12 4 2
13 0 1
14 1 1
15 2 2
16 0 1
17 2 2
18 1 1
19 2 2
20 0 1
21 4 2
JAX-RS implementations automatically support marshalling/unmarshalling of classes based on discoverable JAXB annotations, but because your payload is declared as Object
, I think the created JAXBContext
misses the Department
class and when it's time to marshall it it doesn't know how.
A quick and dirty fix would be to add a XmlSeeAlso
annotation to your response class:
@XmlRootElement
@XmlSeeAlso({Department.class})
public class Response implements Serializable {
....
or something a little more complicated would be "to enrich" the JAXB context for the Response
class by using a ContextResolver
:
import javax.ws.rs.Produces;
import javax.ws.rs.core.MediaType;
import javax.ws.rs.ext.ContextResolver;
import javax.ws.rs.ext.Provider;
import javax.xml.bind.JAXBContext;
import javax.xml.bind.JAXBException;
@Provider
@Produces({ MediaType.APPLICATION_JSON, MediaType.APPLICATION_XML })
public class ResponseResolver implements ContextResolver<JAXBContext> {
private JAXBContext ctx;
public ResponseResolver() {
try {
this.ctx = JAXBContext.newInstance(
Response.class,
Department.class
);
} catch (JAXBException ex) {
throw new RuntimeException(ex);
}
}
public JAXBContext getContext(Class<?> type) {
return (type.equals(Response.class) ? ctx : null);
}
}
All the answers provided here uses normal function but these days most of our code uses arrow functions in ES6. I hope my answer will help readers on how to use arrow function when we do iteration over array of objects
let data = {
"messages": [{
"msgFrom": "13223821242",
"msgBody": "Hi there"
}, {
"msgFrom": "Bill",
"msgBody": "Hello!"
}]
}
Do .forEach on array using arrow function
data.messages.forEach((obj, i) => {
console.log("msgFrom", obj.msgFrom);
console.log("msgBody", obj.msgBody);
});
Do .map on array using arrow function
data.messages.map((obj, i) => {
console.log("msgFrom", obj.msgFrom);
console.log("msgBody", obj.msgBody);
});
If you are using TFS
Remove the NuGet.exe
and NuGet.targets
files from the solution's .nuget
folder. Make sure the files themselves are also removed from the solution workspace.
Retain the NuGet.Config
file to continue to bypass adding packages to source control.
Edit each project file (e.g., .csproj, .vbproj) in the solution and remove any references to the NuGet.targets
file. Open the project file(s) in the editor of your choice and remove the following settings:
<RestorePackages>true</RestorePackages>
...
<Import Project="$(SolutionDir)\.nuget\nuget.targets" />
...
<Target Name="EnsureNuGetPackageBuildImports" BeforeTargets="PrepareForBuild">
<PropertyGroup>
<ErrorText>This project references NuGet package(s) that are missing on this computer. Enable NuGet Package Restore to download them. For more information, see http://go.microsoft.com/fwlink/?LinkID=322105. The missing file is {0}.</ErrorText>
</PropertyGroup>
<Error Condition="!Exists('$(SolutionDir)\.nuget\NuGet.targets')" Text="$([System.String]::Format('$(ErrorText)', '$(SolutionDir)\.nuget\NuGet.targets'))" />
</Target>
If you are not using TFS
Remove the .nuget
folder from your solution. Make sure the folder itself is also removed from the solution workspace.
Edit each project file (e.g., .csproj, .vbproj) in the solution and remove any references to the NuGet.targets
file. Open the project file(s) in the editor of your choice and remove the following settings:
<RestorePackages>true</RestorePackages>
...
<Import Project="$(SolutionDir)\.nuget\nuget.targets" />
...
<Target Name="EnsureNuGetPackageBuildImports" BeforeTargets="PrepareForBuild">
<PropertyGroup>
<ErrorText>This project references NuGet package(s) that are missing on this computer. Enable NuGet Package Restore to download them. For more information, see http://go.microsoft.com/fwlink/?LinkID=322105. The missing file is {0}.</ErrorText>
</PropertyGroup>
<Error Condition="!Exists('$(SolutionDir)\.nuget\NuGet.targets')" Text="$([System.String]::Format('$(ErrorText)', '$(SolutionDir)\.nuget\NuGet.targets'))" />
</Target>
Reference: Migrating MSBuild-Integrated solutions to use Automatic Package Restore
String runtimeVersion = System.getProperty("java.runtime.version");
should return you a string along the lines of:
1.5.0_01-b08
That's the version of Java that Eclipse is using to run your code which is not necessarily the same version that's being used to run Eclipse itself.
You can use this code to bind click an element which is in iframe.
jQuery('.class_in_iframe',jQuery('[id="id_of_iframe"]')[0].contentWindow.document.body).on('click',function(){ _x000D_
console.log("triggered !!")_x000D_
});
_x000D_
var mystring = "this,is,a,test"
mystring.replace(/,/g, "newchar");
Use the global(g
) flag
R.color.red
is an ID (which is also an int
), but is not a color.
Use one of the following instead:
// If you're in an activity:
Button11.setBackgroundColor(getResources().getColor(R.color.red));
// OR, if you're not:
Button11.setBackgroundColor(Button11.getContext().getResources().getColor(R.color.red));
Or, alternatively:
Button11.setBackgroundColor(Color.RED); // From android.graphics.Color
Or, for more pro skills:
Button11.setBackgroundColor(0xFFFF0000); // 0xAARRGGBB
The problem is when we have incoming changes that will merge untracked file, git complains. These commands helped me:
git clean -dxf
git pull origin master
when you start in cygwin, you are in your $HOME, like in unix generally, which maps to c:/cygwin/home/$YOURNAME by default. So you could put everything there.
You can also access the c: drive from cygwin through /cygdrive/c/ (e.g. /cygdrive/c/Documents anb Settings/yourname/Desktop).
With CREATE TABLE statement
CREATE TABLE my_table (
id INT UNSIGNED NOT NULL AUTO_INCREMENT,
name VARCHAR(100) NOT NULL,
PRIMARY KEY (id)
) AUTO_INCREMENT = 100;
or with ALTER TABLE statement
ALTER TABLE my_table AUTO_INCREMENT = 200;
The line would be as shown below:
Dim x As Integer
x = dgvName.Rows(yourRowIndex).Cells(yourColumnIndex).Value
In our case, we receive an XML as a String
and need to get rid of the values that have some "special" characters, like &<>
etc. Basically someone can provide an XML to us in this form:
<notes>
<note>
<to>jenice & carl </to>
<from>your neighbor <; </from>
</note>
</notes>
So I need to find in that String
the values jenice & carl
and your neighbor <;
and properly escape &
and <
(otherwise this is an invalid xml if you later pass it to an engine that shall rename unnamed).
Doing this with regex is a rather dumb idea to begin with, but it's cheap and easy. So the brave ones that would like to do the same thing I did, here you go:
String xml = ...
Pattern p = Pattern.compile("<(.+)>(?!\\R<)(.+)</(\\1)>");
Matcher m = p.matcher(xml);
String result = m.replaceAll(mr -> {
if (mr.group(2).contains("&")) {
return "<" + m.group(1) + ">" + m.group(2) + "+ some change" + "</" + m.group(3) + ">";
}
return "<" + m.group(1) + ">" + mr.group(2) + "</" + m.group(3) + ">";
});
For me I tried following 2 steps which sadly did not work :
Instead, I tried to solve keychain certificate related another issue given here This certificate has an invalid issuer Apple Push Services
This certificate has an invalid issuer
Now go to xcode app. target ? Build Setting ? Provisioning Profile . Select value from 'automatic' to appropriate Provisioning profile . Bingo!!! profile mismatch issue is solved.
Use the PHP function serialize()
to convert arrays to strings. These strings can easily be stored in MySQL database. Using unserialize()
they can be converted to arrays again if needed.
Improving the solution to detect circle with circle collision detection given within the question:
float dx = circle1.x - circle2.x,
dy = circle1.y - circle2.y,
r = circle1.r + circle2.r;
return (dx * dx + dy * dy <= r * r);
It avoids the unnecessary "if with two returns" and the use of more variables than necessary.
Short answer: Yes, you need to rename .cpp files to c, so you can write C: https://msdn.microsoft.com/en-us/library/bb384838.aspx?f=255&MSPPError=-2147217396
From the link above:
By default, the Visual C++ compiler treats all files that end in .c as C source code, and all files that end in .cpp as C++ source code. To force the compiler to treat all files as C regardless of file name extension, use the /Tc compiler option.
That being said, I do not recommend learning C language in Visual Studio, why VS? It does have lots of features you are not going to use while learning C
You'll need to convert any RGB colors into the Lab color space to be able to compare them in the way that humans see them. Otherwise you'll be getting RGB colors that 'match' in some very strange ways.
The wikipedia link on Color Differences gives you an intro into the various Lab color space difference algorithms that have been defined over the years. The simplest that just checks the Euclidian distance of two lab colours, works but has a few flaws.
Conveniently there's a Java implementation of the more sophisticated CIEDE2000 algorithm in the OpenIMAJ project. Provide it your two sets of Lab colours and it'll give you back single distance value.
1.
first of all Port 80(or what ever you are using) and 443 must be allow for both TCP and UDP packets. To do this, create 2 inbound rules for TPC and UDP on Windows Firewall for port 80 and 443. (or you can disable your whole firewall for testing but permanent solution if allow inbound rule)
2.
You need to change the security setting on Apache to allow access from anywhere else, so edit your httpd.conf
file.
Change this section from :
# onlineoffline tag - don't remove
Order Deny,Allow
Deny from all
Allow from 127.0.0.1
Allow from ::1
Allow from localhost
To :
# onlineoffline tag - don't remove
Order Allow,Deny
Allow from all
if "Allow from all" line not work for your then use "Require all granted" then it will work for you.
In version 3 and > of WAMPServer there is a Virtual Hosts pre defined for localhost
so dont amend the httpd.conf
file at all, leave it as you found it.
Using the menus, edit the httpd-vhosts.conf
file.
It should look like this :
<VirtualHost *:80>
ServerName localhost
DocumentRoot D:/wamp/www
<Directory "D:/wamp/www/">
Options +Indexes +FollowSymLinks +MultiViews
AllowOverride All
Require local
</Directory>
</VirtualHost>
Amend it to
<VirtualHost *:80>
ServerName localhost
DocumentRoot D:/wamp/www
<Directory "D:/wamp/www/">
Options +Indexes +FollowSymLinks +MultiViews
AllowOverride All
Require all granted
</Directory>
</VirtualHost>
Note:if you are running wamp for other than port 80 then VirtualHost will be like VirtualHost *:86.(86 or port whatever you are using) instead of VirtualHost *:80
3. Dont forget to restart All Services of Wamp or Apache after making this change
There is no such thing as an int
in Javascript. All Numbers
are actually doubles behind the scenes* so you can't rely on the type system to issue a rounding order for you as you can in C or C#.
You don't need to worry about precision issues (since doubles correctly represent any integer up to 2^53) but you really are stuck with using Math.floor (or other equivalent tricks) if you want to round to the nearest integer.
*Most JS engines use native ints when they can but all in all JS numbers must still have double semantics.
You can use any bash looping constructs like FOR
, with is compatible to Linux and Mac.
https://tiswww.case.edu/php/chet/bash/bashref.html#Looping-Constructs
In your specific case you can define N
iterations, with N
is a number defining how many curl
executions you want.
for n in {1..N}; do curl <arguments>; done
ex:
for n in {1..20}; do curl -d @notification.json -H 'Content-Type: application/json' localhost:3000/dispatcher/notify; done
Thread.wait() call make sense inside a code that synchronizes on Thread.class object. I don't think it's what you meant.
You ask
How can I make a thread wait until it will be notified?
You can make only your current thread wait. Any other thread can be only gently asked to wait, if it agree.
If you want to wait for some condition, you need a lock object - Thread.class object is a very bad choice - it is a singleton AFAIK so synchronizing on it (except for Thread static methods) is dangerous.
Details for synchronization and waiting are already explained by Tom Hawtin.
java.lang.IllegalMonitorStateException
means you are trying to wait on object on which you are not synchronized - it's illegal to do so.
Well, late by 5 years and unsure if it helps :
I was trying to count the no. of rows in a SQL Server table using MS SQL Server Management Studio and ran into some overflow error, then I used the below :
select count_big(1) FROM [dbname].[dbo].[FactSampleValue];
The result :
24296650578 rows
The XPath spec. defines the string value of an element as the concatenation (in document order) of all of its text-node descendents.
This explains the "strange results".
"Better" results can be obtained using the expressions below:
//*[text() = 'qwerty']
The above selects every element in the document that has at least one text-node child with value 'qwerty'.
//*[text() = 'qwerty' and not(text()[2])]
The above selects every element in the document that has only one text-node child and its value is: 'qwerty'.
You need to add RouterModule
to imports
of every @NgModule()
where components use any component or directive from (in this case routerLink
and <router-outlet>
.
declarations: []
is to make components, directives, pipes, known inside the current module.
exports: []
is to make components, directives, pipes, available to importing modules. What is added to declarations
only is private to the module. exports
makes them public.
See also https://angular.io/api/router/RouterModule#usage-notes
ORDER BY article_rating, article_time DESC
will sort by article_time only if there are two articles with the same rating. From all I can see in your example, this is exactly what happens.
? primary sort secondary sort ?
1. 50 | This article rocks | Feb 4, 2009 3.
2. 35 | This article is pretty good | Feb 1, 2009 2.
3. 5 | This Article isn't so hot | Jan 25, 2009 1.
but consider:
? primary sort secondary sort ?
1. 50 | This article rocks | Feb 2, 2009 3.
1. 50 | This article rocks, too | Feb 4, 2009 4.
2. 35 | This article is pretty good | Feb 1, 2009 2.
3. 5 | This Article isn't so hot | Jan 25, 2009 1.
In your test, you are comparing the two TestParent
beans, not the single TestedChild
bean.
Also, Spring proxies your @Configuration
class so that when you call one of the @Bean
annotated methods, it caches the result and always returns the same object on future calls.
See here:
With the introduction of C# 6.0 and the syntax for Auto-Property Initializers, private setters are no longer needed for properties that are only set upon initialization, either inline or within the constructor.
These new syntaxes now compile:
Inline initialized property
public class MyClass1 {
public string MyProperty { get; } = "Aloha!"
}
Constructor initialized property
public class MyClass2 {
public string MyProperty { get; }
public MyClass2(string myProperty) {
MyProperty = myProperty;
}
}
There are a few pieces to doing this, assuming each list does not contain duplicates, Name is a unique identifier, and neither list is ordered.
First create an append extension method to get a single list:
static class Ext {
public static IEnumerable<T> Append(this IEnumerable<T> source,
IEnumerable<T> second) {
foreach (T t in source) { yield return t; }
foreach (T t in second) { yield return t; }
}
}
Thus can get a single list:
var oneList = list1.Append(list2);
Then group on name
var grouped = oneList.Group(p => p.Name);
Then can process each group with a helper to process one group at a time
public Person MergePersonGroup(IGrouping<string, Person> pGroup) {
var l = pGroup.ToList(); // Avoid multiple enumeration.
var first = l.First();
var result = new Person {
Name = first.Name,
Value = first.Value
};
if (l.Count() == 1) {
return result;
} else if (l.Count() == 2) {
result.Change = first.Value - l.Last().Value;
return result;
} else {
throw new ApplicationException("Too many " + result.Name);
}
}
Which can be applied to each element of grouped
:
var finalResult = grouped.Select(g => MergePersonGroup(g));
(Warning: untested.)
Updating state every second in the react class. Note the my index.js passes a function that return current time.
import React from "react";
class App extends React.Component {
constructor(props){
super(props)
this.state = {
time: this.props.time,
}
}
updateMe() {
setInterval(()=>{this.setState({time:this.state.time})},1000)
}
render(){
return (
<div className="container">
<h1>{this.state.time()}</h1>
<button onClick={() => this.updateMe()}>Get Time</button>
</div>
);
}
}
export default App;
Just make a rule for each case:
<div id="homePage" ng-class="{ 'center': page.isSelected(1) , 'left': !page.isSelected(1) }">
Or use the ternary operator:
<div id="homePage" ng-class="page.isSelected(1) ? 'center' : 'left'">
You can use the ljust
method on strings.
>>> name = 'John'
>>> name.ljust(15)
'John '
Note that if the name is longer than 15 characters, ljust
won't truncate it. If you want to end up with exactly 15 characters, you can slice the resulting string:
>>> name.ljust(15)[:15]
(2019) I used $('#'+id).removeAttr().off('click').on('click', function(){...});
I tried $('#'+id).off().on(...)
, but it wouldn't work to reset the onClick attribute every time it was called to be reset.
I use .on('click',function(){...});
to stay away from having to quote block all my javascript functions.
The O.P. could now use:
$(this).removeAttr('onclick').off('click').on('click', function(){
displayCalendar(document.prjectFrm[ia + 'dtSubDate'],'yyyy-mm-dd', this);
});
Where this came through for me is when my div was set with the onClick attribute set statically:
<div onclick = '...'>
Otherwise, if I only had a dynamically attached a listener to it, I would have used the $('#'+id).off().on('click', function(){...});
.
Without the off('click') my onClick listeners were being appended not replaced.
select regexp_replace('This is a test ' || chr(9) || ' foo ', '[[:space:]]', '') from dual;
REGEXP_REPLACE
--------------
Thisisatestfoo
std::copy
cannot be used to insert into an empty container. To do that, you need to use an insert_iterator like so:
std::set<double> input;
input.insert(5);
input.insert(6);
std::vector<double> output;
std::copy(input.begin(), input.end(), inserter(output, output.begin()));
WITH q AS
(
SELECT TOP 10 *
FROM messages
WHERE status = 0
ORDER BY
priority DESC
)
UPDATE q
SET status = 10
Please refer to the official Advanced Content Filter guide and plugin integration tutorial.
You'll find much more than this about this powerful feature. Also see config.extraAllowedContent that seems suitable for your needs.
In the same way you are trying to run cron.php, you can run another PHP script. You will have to do so via the CLI interface though.
#!/usr/bin/env php
<?php
# This file would be say, '/usr/local/bin/run.php'
// code
echo "this was run from CRON";
Then, add an entry to the crontab:
* * * * * /usr/bin/php -f /usr/local/bin/run.php &> /dev/null
If the run.php script had executable permissions, it could be listed directly in the crontab, without the /usr/bin/php part as well. The 'env php' part, in the script, would find the appropriate program to actually run the PHP code. So, for the 'executable' version - add executable permission to the file:
chmod +x /usr/local/bin/run.php
and then, add the following entry into crontab:
* * * * * /usr/local/bin/run.php &> /dev/null
The easiest way to do this, as noted by Umar is, for example
mysql> SET GLOBAL time_zone = 'America/New_York';
Using the named timezone is important for timezone that has a daylights saving adjustment. However, for some linux builds you may get the following response:
#1298 - Unknown or incorrect time zone
If you're seeing this, you may need to run a tzinfo_to_sql translation... it's easy to do, but not obvious. From the linux command line type in:
mysql_tzinfo_to_sql /usr/share/zoneinfo/|mysql -u root mysql -p
Provide your root password (MySQL root, not Linux root) and it will load any definitions in your zoneinfo into mysql. You can then go back and run your
mysql> SET GLOBAL time_zone = timezone;
I've managed to achieve it with minimal effort (just as simple as with ASP.NET Core).
For that I use OWIN Startup.cs
file and Microsoft.Owin.Security.Jwt
library.
In order for the app to hit Startup.cs
we need to amend Web.config
:
<configuration>
<appSettings>
<add key="owin:AutomaticAppStartup" value="true" />
...
Here's how Startup.cs
should look:
using MyApp.Helpers;
using Microsoft.IdentityModel.Tokens;
using Microsoft.Owin;
using Microsoft.Owin.Security;
using Microsoft.Owin.Security.Jwt;
using Owin;
[assembly: OwinStartup(typeof(MyApp.App_Start.Startup))]
namespace MyApp.App_Start
{
public class Startup
{
public void Configuration(IAppBuilder app)
{
app.UseJwtBearerAuthentication(
new JwtBearerAuthenticationOptions
{
AuthenticationMode = AuthenticationMode.Active,
TokenValidationParameters = new TokenValidationParameters()
{
ValidAudience = ConfigHelper.GetAudience(),
ValidIssuer = ConfigHelper.GetIssuer(),
IssuerSigningKey = ConfigHelper.GetSymmetricSecurityKey(),
ValidateLifetime = true,
ValidateIssuerSigningKey = true
}
});
}
}
}
Many of you guys use ASP.NET Core nowadays, so as you can see it doesn't differ a lot from what we have there.
It really got me perplexed first, I was trying to implement custom providers, etc. But I didn't expect it to be so simple. OWIN
just rocks!
Just one thing to mention - after I enabled OWIN Startup NSWag
library stopped working for me (e.g. some of you might want to auto-generate typescript HTTP proxies for Angular app).
The solution was also very simple - I replaced NSWag
with Swashbuckle
and didn't have any further issues.
Ok, now sharing ConfigHelper
code:
public class ConfigHelper
{
public static string GetIssuer()
{
string result = System.Configuration.ConfigurationManager.AppSettings["Issuer"];
return result;
}
public static string GetAudience()
{
string result = System.Configuration.ConfigurationManager.AppSettings["Audience"];
return result;
}
public static SigningCredentials GetSigningCredentials()
{
var result = new SigningCredentials(GetSymmetricSecurityKey(), SecurityAlgorithms.HmacSha256);
return result;
}
public static string GetSecurityKey()
{
string result = System.Configuration.ConfigurationManager.AppSettings["SecurityKey"];
return result;
}
public static byte[] GetSymmetricSecurityKeyAsBytes()
{
var issuerSigningKey = GetSecurityKey();
byte[] data = Encoding.UTF8.GetBytes(issuerSigningKey);
return data;
}
public static SymmetricSecurityKey GetSymmetricSecurityKey()
{
byte[] data = GetSymmetricSecurityKeyAsBytes();
var result = new SymmetricSecurityKey(data);
return result;
}
public static string GetCorsOrigins()
{
string result = System.Configuration.ConfigurationManager.AppSettings["CorsOrigins"];
return result;
}
}
Another important aspect - I sent JWT Token via Authorization header, so typescript code looks for me as follows:
(the code below is generated by NSWag)
@Injectable()
export class TeamsServiceProxy {
private http: HttpClient;
private baseUrl: string;
protected jsonParseReviver: ((key: string, value: any) => any) | undefined = undefined;
constructor(@Inject(HttpClient) http: HttpClient, @Optional() @Inject(API_BASE_URL) baseUrl?: string) {
this.http = http;
this.baseUrl = baseUrl ? baseUrl : "https://localhost:44384";
}
add(input: TeamDto | null): Observable<boolean> {
let url_ = this.baseUrl + "/api/Teams/Add";
url_ = url_.replace(/[?&]$/, "");
const content_ = JSON.stringify(input);
let options_ : any = {
body: content_,
observe: "response",
responseType: "blob",
headers: new HttpHeaders({
"Content-Type": "application/json",
"Accept": "application/json",
"Authorization": "Bearer " + localStorage.getItem('token')
})
};
See headers part - "Authorization": "Bearer " + localStorage.getItem('token')
Naive Bayes: Naive Bayes comes under supervising machine learning which used to make classifications of data sets. It is used to predict things based on its prior knowledge and independence assumptions.
They call it naive because it’s assumptions (it assumes that all of the features in the dataset are equally important and independent) are really optimistic and rarely true in most real-world applications.
It is classification algorithm which makes the decision for the unknown data set. It is based on Bayes Theorem which describe the probability of an event based on its prior knowledge.
Below diagram shows how naive Bayes works
Formula to predict NB:
How to use Naive Bayes Algorithm ?
Let's take an example of how N.B woks
Step 1: First we find out Likelihood of table which shows the probability of yes or no in below diagram. Step 2: Find the posterior probability of each class.
Problem: Find out the possibility of whether the player plays in Rainy condition?
P(Yes|Rainy) = P(Rainy|Yes) * P(Yes) / P(Rainy)
P(Rainy|Yes) = 2/9 = 0.222
P(Yes) = 9/14 = 0.64
P(Rainy) = 5/14 = 0.36
Now, P(Yes|Rainy) = 0.222*0.64/0.36 = 0.39 which is lower probability which means chances of the match played is low.
For more reference refer these blog.
Refer GitHub Repository Naive-Bayes-Examples
I tried to call
startService(oIntent);
bindService(oIntent, mConnection, Context.BIND_AUTO_CREATE);
consequently and I could create a sticky service and bind to it. Detailed tutorial for Bound Service Example.
Even better when choosing the Assembly location. Filter most of the assemblies if you know all your implemented interfaces are within the same Assembly.DefinedTypes.
// We get the assembly through the base class
var baseAssembly = typeof(baseClass).GetTypeInfo().Assembly;
// we filter the defined classes according to the interfaces they implement
var typeList = baseAssembly.DefinedTypes.Where(type => type.ImplementedInterfaces.Any(inter => inter == typeof(IMyInterface))).ToList();
SQL Server may also return this error if the service account does not have permission to read the file being imported. Ensure that the service account has read access to the file location. For example:
icacls D:\ImportFiles /Grant "NT Service\MSSQLServer":(OI)(CI)R
Expanding on the answers given above, just ensure you set maxZoom option when initializing the map object.
Another alternative without the exception check:
UPDATE tablename
SET val1 = in_val1,
val2 = in_val2
WHERE val3 = in_val3;
IF ( sql%rowcount = 0 )
THEN
INSERT INTO tablename
VALUES (in_val1, in_val2, in_val3);
END IF;
Another resolution for this problem is to add z-index: 0;
to .modal-backdrop class in your bootstrap-dialog.css file if you don't want to modify bootstrap.css.
I had a similar question and found what I think to be the correct solution with View Composers
View Composers allow you to set variables every time a certain view is called, and they can be specific views, or entire view templates. Anyway, I know it's not a direct answer to the question (and 2 years too late) but it seems like a more graceful solution than setting variables within a view with blade.
View::composer(array('AdminViewPath', 'LoginView/subview'), function($view) {
$view->with(array('bodyClass' => 'admin'));
});
$ join -v 1 -t '' file1 file2
line2
line3
The -t
makes sure that it compares the whole line, if you had a space in some of the lines.
In the link you provided, thats not a loop in sql...
thats a loop in programming language
they are first getting list of all distinct districts, and then for each district executing query again.
Here's another data.table
solution, since which.max
does not work on characters
library(data.table)
group <- data.table(Subject=ID, pt=Value, Event=Event)
group[, .SD[order(pt, decreasing = TRUE) == 1], by = Subject]
echo "<a href='#' style = \"font-color: #ff0000;\"> Movie List for {$key} 2013 </a>";
Yes, assignment is supported for structs. However, there are problems:
struct S {
char * p;
};
struct S s1, s2;
s1.p = malloc(100);
s2 = s1;
Now the pointers of both structs point to the same block of memory - the compiler does not copy the pointed to data. It is now difficult to know which struct instance owns the data. This is why C++ invented the concept of user-definable assignment operators - you can write specific code to handle this case.
Before looking at the difference between java.lang.RuntimeException
and java.lang.Exception
classes, you must know the Exception
hierarchy. Both Exception
and Error
classes are derived from class Throwable
(which derives from the class Object
). And the class RuntimeException
is derived from class Exception
.
All the exceptions are derived either from Exception
or RuntimeException
.
All the exceptions which derive from RuntimeException
are referred to as unchecked exceptions. And all the other exceptions are checked exceptions. A checked exception must be caught somewhere in your code, otherwise, it will not compile. That is why they are called checked exceptions. On the other hand, with unchecked exceptions, the calling method is under no obligation to handle or declare it.
Therefore all the exceptions which compiler forces you to handle are directly derived from java.lang.Exception
and all the other which compiler does not force you to handle are derived from java.lang.RuntimeException
.
Following are some of the direct known subclasses of RuntimeException.
AnnotationTypeMismatchException,
ArithmeticException,
ArrayStoreException,
BufferOverflowException,
BufferUnderflowException,
CannotRedoException,
CannotUndoException,
ClassCastException,
CMMException,
ConcurrentModificationException,
DataBindingException,
DOMException,
EmptyStackException,
EnumConstantNotPresentException,
EventException,
IllegalArgumentException,
IllegalMonitorStateException,
IllegalPathStateException,
IllegalStateException,
ImagingOpException,
IncompleteAnnotationException,
IndexOutOfBoundsException,
JMRuntimeException,
LSException,
MalformedParameterizedTypeException,
MirroredTypeException,
MirroredTypesException,
MissingResourceException,
NegativeArraySizeException,
NoSuchElementException,
NoSuchMechanismException,
NullPointerException,
ProfileDataException,
ProviderException,
RasterFormatException,
RejectedExecutionException,
SecurityException,
SystemException,
TypeConstraintException,
TypeNotPresentException,
UndeclaredThrowableException,
UnknownAnnotationValueException,
UnknownElementException,
UnknownTypeException,
UnmodifiableSetException,
UnsupportedOperationException,
WebServiceException
A couple of different ways to solve the problem:
Just replace Environment.Exit with return. The compiler knows that return ends the method, but doesn't know that Environment.Exit does.
static void Main(string[] args) {
if(args.Length != 0) {
if(Byte.TryParse(args[0], out maxSize))
queue = new Queue(){MaxSize = maxSize};
else
return;
} else {
return;
}
Of course, you can really only get away with that because you're using 0 as your exit code in all cases. Really, you should return an int instead of using Environment.Exit. For this particular case, this would be my preferred method
static int Main(string[] args) {
if(args.Length != 0) {
if(Byte.TryParse(args[0], out maxSize))
queue = new Queue(){MaxSize = maxSize};
else
return 1;
} else {
return 2;
}
}
Initialize queue to null, which is really just a compiler trick that says "I'll figure out my own uninitialized variables, thank you very much". It's a useful trick, but I don't like it in this case - you have too many if branches to easily check that you're doing it properly. If you really wanted to do it this way, something like this would be clearer:
static void Main(string[] args) {
Byte maxSize;
Queue queue = null;
if(args.Length == 0 || !Byte.TryParse(args[0], out maxSize)) {
Environment.Exit(0);
}
queue = new Queue(){MaxSize = maxSize};
for(Byte j = 0; j < queue.MaxSize; j++)
queue.Insert(j);
for(Byte j = 0; j < queue.MaxSize; j++)
Console.WriteLine(queue.Remove());
}
Add a return statement after Environment.Exit. Again, this is more of a compiler trick - but is slightly more legit IMO because it adds semantics for humans as well (though it'll keep you from that vaunted 100% code coverage)
static void Main(String[] args) {
if(args.Length != 0) {
if(Byte.TryParse(args[0], out maxSize)) {
queue = new Queue(){MaxSize = maxSize};
} else {
Environment.Exit(0);
return;
}
} else {
Environment.Exit(0);
return;
}
for(Byte j = 0; j < queue.MaxSize; j++)
queue.Insert(j);
for(Byte j = 0; j < queue.MaxSize; j++)
Console.WriteLine(queue.Remove());
}
Added shortcut Ctrl+Shift+X C to Keybindings (Window -> Preferences -> filter for Keys) when 'Editing Java Source' for 'Remove Active Session'.
This actually does cause a problem because line endings are automatically modified dirtying files without making any changes to them. See this post for resolution.
You need an uppercase M
for the month part.
string strDate = DateTime.Now.ToString("MM/dd/yyyy");
Lowercase m
is for outputting (and parsing) a minute (such as h:mm
).
e.g. a full date time string might look like this:
string strDate = DateTime.Now.ToString("MM/dd/yyyy h:mm");
Notice the uppercase/lowercase mM
difference.
Also if you will always deal with the same datetime format string, you can make it easier by writing them as C# extension methods.
public static class DateTimeMyFormatExtensions
{
public static string ToMyFormatString(this DateTime dt)
{
return dt.ToString("MM/dd/yyyy");
}
}
public static class StringMyDateTimeFormatExtension
{
public static DateTime ParseMyFormatDateTime(this string s)
{
var culture = System.Globalization.CultureInfo.CurrentCulture;
return DateTime.ParseExact(s, "MM/dd/yyyy", culture);
}
}
EXAMPLE: Translating between DateTime/string
DateTime now = DateTime.Now;
string strNow = now.ToMyFormatString();
DateTime nowAgain = strNow.ParseMyFormatDateTime();
Note that there is NO way to store a custom DateTime
format information to use as default
as in .NET most string formatting depends on the currently set culture, i.e.
System.Globalization.CultureInfo.CurrentCulture.
The only easy way you can do is to roll a custom extension method.
Also, the other easy way would be to use a different "container" or "wrapper" class for your DateTime, i.e. some special class with explicit operator
defined that automatically translates to and from DateTime/string. But that is dangerous territory.
If you are having a problem with NULL values, use the COALESCE function to replace the NULL with the value of your choice. Your query would then look like this:
SELECT (COALESCE(field1, '') + '' + COALESCE(field2, '') + '' + COALESCE(field3,'')) FROM table1
Perhaps not the best options but just another way is to read the Windows Registry in the host machine, on elevated PowerShell prompt you can do something like this:
#Get SQL instance's Port number using Windows Registry:
$instName = (Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Microsoft SQL Server').InstalledInstances[0]
$tcpPort = (Get-ItemProperty "HKLM:\SOFTWARE\Microsoft\Microsoft SQL Server\$instName\MSSQLServer\SuperSocketNetLib\Tcp").TcpPort
Write-Host The SQL Instance: `"$instName`" is listening on `"$tcpPort`" "TcpPort."
Ensure to run this PowerShell script in the Host Server (that hosts your SQL instance / SQL Server installation), which means you have to first RDP into the SQL Server/Box/VM, then run this code.
HTH
Error is something that most of the time you cannot handle it.
Exception was meant to give you an opportunity to do something with it. like try something else or write to the log.
try{
//connect to database 1
}
catch(DatabaseConnctionException err){
//connect to database 2
//write the err to log
}
I was able to solve the issue by running:
sudo systemctl start [email protected]
This issue still existed in my case even after,
flutter clean
(deletes build folder) and proper indentations in yaml file
It got fixed by itself, as it could be an issue related to Android Studio.
Fix 1) Restart the emulator in Cold Boot mode, In Android Studio, after clicking List Virtual Devices button, click Drop down arrow (last icon next to edit icon) => Choose Cold Boot Now option. If issue still exist, follow as below
Fix 2) After changing the emulator virtual device as a workaround,
For Example : From Nexus 6 to Pixel emulator
--happy coding!
I normally use the history object for this. It also does not reload the page.
Example:
history.pushState({}, '',
`/pagepath/path?query=${this.myQueryParam}`);
You can use cmd + ; for Mac or Ctrl + Alt + Shift + S for Windows/Linux to pull up the Project Structure dialog. In there, you can set the JDK location as well as the Android SDK location.
To get your JDK location, run /usr/libexec/java_home -v 1.7
in terminal. Send 1.7 for Java 7 or 1.8 for Java 8.
See this two links:
deny Element for authorization (ASP.NET Settings Schema) http://msdn.microsoft.com/en-us/library/vstudio/8aeskccd%28v=vs.100%29.aspx
allow Element for authorization (ASP.NET Settings Schema): http://msdn.microsoft.com/en-us/library/vstudio/acsd09b0%28v=vs.100%29.aspx
you should use conditional comments
<!--[if IE 9]>
<script type="text/javascript">
window.isIE9 = true;
</script>
<![endif]-->
You can then check for $window.isIE9 in your controllers.
If you're a minimalist like me. Say you only want to render a record with a list containing entries.
<div>
{data.map((record) => (
record.list.length > 0
? (<YourRenderComponent record={record} key={record.id} />)
: null
))}
</div>
No -P needed; -E is sufficient:
grep -E '(^|\s)abc(\s|$)'
or even without -E:
grep '\(^\|\s\)abc\(\s\|$\)'
You post JSON like this
$.ajax(url, {
data : JSON.stringify(myJSObject),
contentType : 'application/json',
type : 'POST',
...
if you pass an object as settings.data jQuery will convert it to query parameters and by default send with the data type application/x-www-form-urlencoded; charset=UTF-8, probably not what you want
I personally use
myVar === undefined
Warning: Please note that ===
is used over ==
and that myVar
has been previously declared (not defined).
I do not like typeof myVar === "undefined"
. I think it is long winded and unnecessary. (I can get the same done in less code.)
Now some people will keel over in pain when they read this, screaming: "Wait! WAAITTT!!! undefined
can be redefined!"
Cool. I know this. Then again, most variables in Javascript can be redefined. Should you never use any built-in identifier that can be redefined?
If you follow this rule, good for you: you aren't a hypocrite.
The thing is, in order to do lots of real work in JS, developers need to rely on redefinable identifiers to be what they are. I don't hear people telling me that I shouldn't use setTimeout
because someone can
window.setTimeout = function () {
alert("Got you now!");
};
Bottom line, the "it can be redefined" argument to not use a raw === undefined
is bogus.
(If you are still scared of undefined
being redefined, why are you blindly integrating untested library code into your code base? Or even simpler: a linting tool.)
Also, like the typeof
approach, this technique can "detect" undeclared variables:
if (window.someVar === undefined) {
doSomething();
}
But both these techniques leak in their abstraction. I urge you not to use this or even
if (typeof myVar !== "undefined") {
doSomething();
}
Consider:
var iAmUndefined;
To catch whether or not that variable is declared or not, you may need to resort to the in
operator. (In many cases, you can simply read the code O_o).
if ("myVar" in window) {
doSomething();
}
But wait! There's more! What if some prototype chain magic is happening…? Now even the superior in
operator does not suffice. (Okay, I'm done here about this part except to say that for 99% of the time, === undefined
(and ****cough**** typeof
) works just fine. If you really care, you can read about this subject on its own.)
function deleteEmpty(obj){
for(var k in obj)
if(k == "children"){
if(obj[k]){
deleteEmpty(obj[k]);
}else{
delete obj.children;
}
}
}
for(var i=0; i< a.children.length; i++){
deleteEmpty(a.children[i])
}
Okay, so you want to calculate a^b mod m
. First we'll take a naive approach and then see how we can refine it.
First, reduce a mod m
. That means, find a number a1
so that 0 <= a1 < m
and a = a1 mod m
. Then repeatedly in a loop multiply by a1
and reduce again mod m
. Thus, in pseudocode:
a1 = a reduced mod m
p = 1
for(int i = 1; i <= b; i++) {
p *= a1
p = p reduced mod m
}
By doing this, we avoid numbers larger than m^2
. This is the key. The reason we avoid numbers larger than m^2
is because at every step 0 <= p < m
and 0 <= a1 < m
.
As an example, let's compute 5^55 mod 221
. First, 5
is already reduced mod 221
.
1 * 5 = 5 mod 221
5 * 5 = 25 mod 221
25 * 5 = 125 mod 221
125 * 5 = 183 mod 221
183 * 5 = 31 mod 221
31 * 5 = 155 mod 221
155 * 5 = 112 mod 221
112 * 5 = 118 mod 221
118 * 5 = 148 mod 221
148 * 5 = 77 mod 221
77 * 5 = 164 mod 221
164 * 5 = 157 mod 221
157 * 5 = 122 mod 221
122 * 5 = 168 mod 221
168 * 5 = 177 mod 221
177 * 5 = 1 mod 221
1 * 5 = 5 mod 221
5 * 5 = 25 mod 221
25 * 5 = 125 mod 221
125 * 5 = 183 mod 221
183 * 5 = 31 mod 221
31 * 5 = 155 mod 221
155 * 5 = 112 mod 221
112 * 5 = 118 mod 221
118 * 5 = 148 mod 221
148 * 5 = 77 mod 221
77 * 5 = 164 mod 221
164 * 5 = 157 mod 221
157 * 5 = 122 mod 221
122 * 5 = 168 mod 221
168 * 5 = 177 mod 221
177 * 5 = 1 mod 221
1 * 5 = 5 mod 221
5 * 5 = 25 mod 221
25 * 5 = 125 mod 221
125 * 5 = 183 mod 221
183 * 5 = 31 mod 221
31 * 5 = 155 mod 221
155 * 5 = 112 mod 221
112 * 5 = 118 mod 221
118 * 5 = 148 mod 221
148 * 5 = 77 mod 221
77 * 5 = 164 mod 221
164 * 5 = 157 mod 221
157 * 5 = 122 mod 221
122 * 5 = 168 mod 221
168 * 5 = 177 mod 221
177 * 5 = 1 mod 221
1 * 5 = 5 mod 221
5 * 5 = 25 mod 221
25 * 5 = 125 mod 221
125 * 5 = 183 mod 221
183 * 5 = 31 mod 221
31 * 5 = 155 mod 221
155 * 5 = 112 mod 221
Therefore, 5^55 = 112 mod 221
.
Now, we can improve this by using exponentiation by squaring; this is the famous trick wherein we reduce exponentiation to requiring only log b
multiplications instead of b
. Note that with the algorithm that I described above, the exponentiation by squaring improvement, you end up with the right-to-left binary method.
a1 = a reduced mod m
p = 1
while (b > 0) {
if (b is odd) {
p *= a1
p = p reduced mod m
}
b /= 2
a1 = (a1 * a1) reduced mod m
}
Thus, since 55 = 110111 in binary
1 * (5^1 mod 221) = 5 mod 221
5 * (5^2 mod 221) = 125 mod 221
125 * (5^4 mod 221) = 112 mod 221
112 * (5^16 mod 221) = 112 mod 221
112 * (5^32 mod 221) = 112 mod 221
Therefore the answer is 5^55 = 112 mod 221
. The reason this works is because
55 = 1 + 2 + 4 + 16 + 32
so that
5^55 = 5^(1 + 2 + 4 + 16 + 32) mod 221
= 5^1 * 5^2 * 5^4 * 5^16 * 5^32 mod 221
= 5 * 25 * 183 * 1 * 1 mod 221
= 22875 mod 221
= 112 mod 221
In the step where we calculate 5^1 mod 221
, 5^2 mod 221
, etc. we note that 5^(2^k)
= 5^(2^(k-1)) * 5^(2^(k-1))
because 2^k = 2^(k-1) + 2^(k-1)
so that we can first compute 5^1
and reduce mod 221
, then square this and reduce mod 221
to obtain 5^2 mod 221
, etc.
The above algorithm formalizes this idea.
Btw you can also use the ui-sref attribute in your templates to pass objects
ui-sref="myState({ myParam: myObject })"
Actually I don't see any nulls:
given:
static void Main()
{
string[] testArray = new string[]
{
"aa",
"ab",
"ac",
"ad",
"ab",
"af"
};
Array.Sort(testArray, StringComparer.InvariantCulture);
Array.ForEach(testArray, x => Console.WriteLine(x));
}
I obtained:
To print the second line:
awk 'FNR == 2 {print}'
To print the second field:
awk '{print $2}'
To print the third field of the fifth line:
awk 'FNR == 5 {print $3}'
Here's an example with a header line and (redundant) field descriptions:
awk 'BEGIN {print "Name\t\tAge"} FNR == 5 {print "Name: "$3"\tAge: "$2}'
There are better ways to align columns than "\t\t" by the way.
Use exit
to stop as soon as you've printed the desired record if there's no reason to process the whole file:
awk 'FNR == 2 {print; exit}'
I've tried a select statement now with a PreparedStatement
, but it turned out that it was not faster than the Jdbc template. Maybe, as mezmo suggested, it automatically creates prepared statements.
Anyway, the reason for my sql SELECT
s being so slow was another one. In the WHERE
clause I always used the operator LIKE
, when all I wanted to do was finding an exact match. As I've found out LIKE
searches for a pattern and therefore is pretty slow.
I'm using the operator =
now and it's much faster.
Use SQL Server Management Objects (SMO) which understands GO separators. See my blog post here: http://weblogs.asp.net/jongalloway/Handling-_2200_GO_2200_-Separators-in-SQL-Scripts-2D00-the-easy-way
Sample code:
public static void Main()
{
string scriptDirectory = "c:\\temp\\sqltest\\";
string sqlConnectionString = "Integrated Security=SSPI;" +
"Persist Security Info=True;Initial Catalog=Northwind;Data Source=(local)";
DirectoryInfo di = new DirectoryInfo(scriptDirectory);
FileInfo[] rgFiles = di.GetFiles("*.sql");
foreach (FileInfo fi in rgFiles)
{
FileInfo fileInfo = new FileInfo(fi.FullName);
string script = fileInfo.OpenText().ReadToEnd();
using (SqlConnection connection = new SqlConnection(sqlConnectionString))
{
Server server = new Server(new ServerConnection(connection));
server.ConnectionContext.ExecuteNonQuery(script);
}
}
}
If that won't work for you, see Phil Haack's library which handles that: http://haacked.com/archive/2007/11/04/a-library-for-executing-sql-scripts-with-go-separators-and.aspx
Background images, ideally, are always done with CSS. All other images are done with html. This will span the whole background of your site.
body {
background: url('../images/cat.ong');
background-size: cover;
background-position: center;
background-attachment: fixed;
}
players
is a list which needs to be indexed by integers. You seem to be using it like a dictionary. Maybe you could use unpacking -- Something like:
name, score = player
(if the player
list is always a constant length).
There's not much more advice we can give you without knowing what query
is and how it works.
It's worth pointing out that the entire code you posted doesn't make a whole lot of sense. There's an IndentationError
on the second line. Also, your function is looping over some iterable, but unconditionally returning during the first iteration which isn't usually what you actually want to do.
Here is another solution using Jquery I find it a little easier and neater than inline JS sometimes.
<html>
<head>
<script src="//ajax.googleapis.com/ajax/libs/jquery/1.10.1/jquery.min.js"></script>
<script>
/* if you prefer to functionize and use onclick= rather then the .on bind
function hide_show(){
$(this).hide();
$("#hidden-div").show();
}
*/
$(function(){
$("#chkbtn").on('click',function() {
$(this).hide();
$("#hidden-div").show();
});
});
</script>
<style>
.hidden-div {
display:none
}
</style>
</head>
<body>
<div class="reform">
<form id="reform" action="action.php" method="post" enctype="multipart/form-data">
<input type="hidden" name="type" value="" />
<fieldset>
content here...
</fieldset>
<div class="hidden-div" id="hidden-div">
<fieldset>
more content here that is hidden until the button below is clicked...
</fieldset>
</form>
</div>
<span style="display:block; padding-left:640px; margin-top:10px;"><button id="chkbtn">Check Availability</button></span>
</div>
</body>
</html>
You can using the exists
if (pricePublicList.Exists(x => x.Size == 200))
{
//code
}
The following code works for me.
//escape the double quotes in json string
String payload="{\"jsonrpc\":\"2.0\",\"method\":\"changeDetail\",\"params\":[{\"id\":11376}],\"id\":2}";
String requestUrl="https://git.eclipse.org/r/gerrit/rpc/ChangeDetailService";
sendPostRequest(requestUrl, payload);
method implementation:
public static String sendPostRequest(String requestUrl, String payload) {
try {
URL url = new URL(requestUrl);
HttpURLConnection connection = (HttpURLConnection) url.openConnection();
connection.setDoInput(true);
connection.setDoOutput(true);
connection.setRequestMethod("POST");
connection.setRequestProperty("Accept", "application/json");
connection.setRequestProperty("Content-Type", "application/json; charset=UTF-8");
OutputStreamWriter writer = new OutputStreamWriter(connection.getOutputStream(), "UTF-8");
writer.write(payload);
writer.close();
BufferedReader br = new BufferedReader(new InputStreamReader(connection.getInputStream()));
StringBuffer jsonString = new StringBuffer();
String line;
while ((line = br.readLine()) != null) {
jsonString.append(line);
}
br.close();
connection.disconnect();
return jsonString.toString();
} catch (Exception e) {
throw new RuntimeException(e.getMessage());
}
}
I prefer this syntax as it allows to set configuration parameters for the shell:
---
- name: an example
shell:
cmd: |
docker build -t current_dir .
echo "Hello World"
date
chdir: /home/vagrant/
Gradle looks for gradle.properties
files in these places:
GRADLE_USER_HOME
environment variable, which if not set defaults to USER_HOME/.gradle
)Properties from one file will override the properties from the previous ones (so file in gradle user home has precedence over the others, and file in sub-project has precedence over the one in project root).
Reference: https://gradle.org/docs/current/userguide/build_environment.html
you can use in your app.ts || main.ts file
import {enableProdMode} from '@angular/core';
enableProdMode();
bootstrap(....);
What exactly is CGI?
A means for a web server to get its data from a program (instead of, for instance, a file).
Whats the big deal with /cgi-bin/*.cgi?
No big deal. It is just a convention.
I don't know what is this cgi-bin directory on the server for. I don't know why they have *.cgi extensions.
The server has to know what to do with the file (i.e. treat it as a program to execute instead of something to simply serve up). Having a .html extension tells it to use a text/html content type. Having a .cgi extension tells it to run it as a program.
Keeping executables in a separate directory gives some added protection against executing incorrect files and/or serving up CGI programs as raw data in case the server gets misconfigured.
Why does Perl always comes in the way.
It doesn't. Perl was just big and popular at the same time as CGI.
I haven't used Perl CGI for years. I was using mod_perl for a long time, and tend towards PSGI/Plack with FastCGI these days.
This book is another great example CGI Programming with Perl Why not "CGI Programming with PHP/JSP/ASP".
CGI isn't very efficient. Better methods for talking to programs from webservers came along at around the same time as PHP. JSP and ASP are different methods for talking to programs.
CGI Programming in C this confuses me a lot. in C?? Seriously??
It is a programming language, why not?
When do I compile?
How does the program gets executed (because it will be a machine code, so it must execute as a independent process).
It doesn't have to execute as an independent process (you can write Apache modules in C), but the whole concept of CGI is that it launches an external process.
How does it communicate with the web server? IPC?
STDIN/STDOUT and environment variables — as defined in the CGI specification.
and interfacing with all the servers (in my example MATLAB & MySQL) using socket programming?
Using whatever methods you like and are supported.
They say that CGI is depreciated. Its no more in use. Is it so?
CGI is inefficient, slow and simple. It is rarely used, when it is used, it is because it is simple. If performance isn't a big deal, then simplicity is worth a lot.
What is its latest update?
1.1
The below query takes the first date for each work order (in a table of showing all status changes):
SELECT
WORKORDERNUM,
MIN(DATE)
FROM
WORKORDERS
WHERE
DATE >= to_date('2015-01-01','YYYY-MM-DD')
GROUP BY
WORKORDERNUM
I found a workaround.
This will get good results for edges and aliasing, whilst retaining a good color for the see-
All work perfectly :)
NSString *test = @"test";
unichar a;
int index = 5;
@try {
a = [test characterAtIndex:index];
}
@catch (NSException *exception) {
NSLog(@"%@", exception.reason);
NSLog(@"Char at index %d cannot be found", index);
NSLog(@"Max index is: %lu", [test length] - 1);
}
@finally {
NSLog(@"Finally condition");
}
Log:
[__NSCFConstantString characterAtIndex:]: Range or index out of bounds
Char at index 5 cannot be found
Max index is: 3
Finally condition
Please notice the function set.update()
. The documentation says:
Update a set with the union of itself and others.
I don't know this is correct format or not. but it can solved my problem with removing type="text/css" when insert css code in html/tpl file with php.
<style type="text/css"></style>
_x000D_
become
<style></style>
_x000D_
I was able to use AWS cli fully authenticated, so for me the issue was within terraform for sure. I tried all the steps above with no success. A reboot fixed it for me, there must be some a cache somewhere in terraform that was causing this issue.
You didn't mention what output format you need but reportlab is good at creating charts both in pdf and bitmap (e.g. png) format.
Here is a simple example of a barchart in png and pdf format:
from reportlab.graphics.shapes import Drawing
from reportlab.graphics.charts.barcharts import VerticalBarChart
d = Drawing(300, 200)
chart = VerticalBarChart()
chart.width = 260
chart.height = 160
chart.x = 20
chart.y = 20
chart.data = [[1,2], [3,4]]
chart.categoryAxis.categoryNames = ['foo', 'bar']
chart.valueAxis.valueMin = 0
d.add(chart)
d.save(fnRoot='test', formats=['png', 'pdf'])
alt text http://i40.tinypic.com/2j677tl.jpg
Note: the image has been converted to jpg by the image host.
You could check https://www.allmytweets.net/
This saves all the tweets.
Like this?
In LINQ:
var sortedList = originalList.OrderBy(foo => !foo.AVC)
.ToList();
Or in-place:
originalList.Sort((foo1, foo2) => foo2.AVC.CompareTo(foo1.AVC));
As Jon Skeet says, the trick here is knowing that false
is considered to be 'smaller' than true.
If you find that you are doing these ordering operations in lots of different places in your code, you might want to get your type Foo
to implement the IComparable<Foo>
and IComparable
interfaces.
I think you meant to do url[i] <- paste(...
instead of url[i] = paste(...
. If so replace =
with <-
.
Making use of CSS sprites and data uri gives extra interesting benefits like fast loading and less requests AND we get IE8 support by using image/base64:
HTML
<div class="div1"></div>
<div class="div2"></div>
CSS
.div1:after, .div2:after {
content: '';
display: block;
height: 80px;
width: 80px;
background-image: url(data:image/svg+xml,%3Csvg%20xmlns%3D%22http%3A%2F%2Fwww.w3.org%2F2000%2Fsvg%22%20version%3D%221.1%22%20height%3D%2280%22%20width%3D%22160%22%3E%0D%0A%20%20%3Ccircle%20cx%3D%2240%22%20cy%3D%2240%22%20r%3D%2238%22%20stroke%3D%22black%22%20stroke-width%3D%221%22%20fill%3D%22red%22%20%2F%3E%0D%0A%20%20%3Ccircle%20cx%3D%22120%22%20cy%3D%2240%22%20r%3D%2238%22%20stroke%3D%22black%22%20stroke-width%3D%221%22%20fill%3D%22blue%22%20%2F%3E%0D%0A%3C%2Fsvg%3E);
}
.div2:after {
background-position: -80px 0;
}
For IE8, change to this:
background-image: url(data:image/png;base64,data......);
To get a footer that sticks to the bottom of your viewport, give it a fixed position like this:
footer {
position: fixed;
height: 100px;
bottom: 0;
width: 100%;
}
Bootstrap includes this CSS in the Navbar > Placement section with the class fixed-bottom
. Just add this class to your footer element:
<footer class="fixed-bottom">
Bootstrap docs: https://getbootstrap.com/docs/4.4/utilities/position/#fixed-bottom
Another advanced method is called an ArrayIterator
. It’s part of a wider class
that exposes many accessible variables
and functions
. You are more likely to see this as part of PHP
classes and heavily object-oriented
projects.
$fnames = ["Muhammed", "Ali", "Fatimah", "Hasan", "Hussein"];
$arrObject = new ArrayObject($fnames);
$arrayIterator = $arrObject->getIterator();
while( $arrayIterator->valid() ){
echo $arrayIterator->current() . "<br />";
$arrayIterator->next();
}
You probably need to chdir to the correct directory before calling the script. This way you can ensure what directory your script is "in" before calling the shell command.
$old_path = getcwd();
chdir('/my/path/');
$output = shell_exec('./script.sh var1 var2');
chdir($old_path);
The Return View(model) returns you error because you don't fill the model with the values in your post method and the model data for the dropdown is empty. Please provide the Get method to explain further how to manage displaying the error. In order to the error to be shown you should use this:
[HttpPost]
public ActionResult form_edit(FormModels model)
{
if(ModelState.IsValid())
{
--- operations
return Redirect("OtherAction", "SomeController");
}
// here you can use a little trick
//fill the model property that holds the information for the dropdown with the data
// you haven't provided the get method but it should look something like this
model.Countries = ... some data goes here;
model.dd_value = ... some other data;
model.dd_text = ... other data;
ModelState.AddModelError("", "adfdghdghgdhgdhdgda");
return View(model);
}
and then in the view just use :
@model mvc_cs.Models.FormModels
@using ctrlr = mvc_cs.Controllers.FormController
@using (Html.BeginForm("form_edit", "Form", FormMethod.Post))
{
<table>
<tr>
<td>
@Html.ValidationSummary(true)
</td>
</tr>
<tr>
<th>
@Html.DisplayNameFor(model => model.content_name)
@Html.DropDownListFor(x => x.selectedvalue, new SelectList(Model.Countries, Model.dd_value, Model.dd_text), "-- Select Product--")
</th>
</tr>
</table>
<table>
<tr>
<td>
<input type="submit" value="Submit" />
</td>
</tr>
</table>
}
This should work okay.
If you just use RedirectToAction it will redirect you to the get method --> you will have no error but the view will be just reloaded and no error would be shown.
other way around is that you can pass the error not by ModelState.AddError, but with ViewData["error"] like this:
[HttpPost]
public ActionResult form_edit(FormModels model)
{
TempData["error"] = "someErrorMessage";
return RedirectToAction("form_Post", "Form");
}
[HttpGet]
public ActionResult form_edit()
{
do stuff here ----
ViewData["error"] = TempData["error"];
return View();
}
@model mvc_cs.Models.FormModels
@using ctrlr = mvc_cs.Controllers.FormController
@using (Html.BeginForm("form_edit", "Form", FormMethod.Post))
{
<table>
<tr>
<td>
<div>@ViewData["error"]</div>
</td>
</tr>
<tr>
<th>
@Html.DisplayNameFor(model => model.content_name)
@Html.DropDownListFor(x => x.selectedvalue, new SelectList(Model.Countries, Model.dd_value, Model.dd_text), "-- Select Product--")
</th>
</tr>
</table>
<table>
<tr>
<td>
<input type="submit" value="Submit" />
</td>
</tr>
</table>
}
Yes you can. You can even test it:
var i = 0;_x000D_
var timer = setInterval(function() {_x000D_
console.log(++i);_x000D_
if (i === 5) clearInterval(timer);_x000D_
console.log('post-interval'); //this will still run after clearing_x000D_
}, 200);
_x000D_
In this example, this timer clears when i
reaches 5.
This question and these answers are helpful. With them I was able to set my desired dark blue navigationBar
color with white title and button text.
But I also needed to change the clock, carrier, signal strength, etc. to white. Black just didn't contrast enough with the dark blue.
I may have overlooked that solution in one of the previous answers, but I was able to make that change by adding this line to my top level viewController
's viewDidLoad
:
[self.navigationController.navigationBar setBarStyle:UIStatusBarStyleLightContent];
If you are utilizing arrays too much then you should include cstring.h
because it has too many functions including finding substrings.
SELECT rowInt, Value,
COALESCE(
(
SELECT TOP 1 Value
FROM myTable mi
WHERE mi.rowInt > m.rowInt
ORDER BY
rowInt
), 0) - Value AS diff
FROM myTable m
ORDER BY
rowInt
Wouldn't this
"d+|D+"
do the job instead of the cumbersome:
"(?<=\\D)(?=\\d)|(?<=\\d)(?=\\D)"
?
Here is the Link for similar answers : http://sickprogrammersarea.blogspot.in/2014/03/technical-interview-questions-on-c_6.html
A smart pointer is an object that acts, looks and feels like a normal pointer but offers more functionality. In C++, smart pointers are implemented as template classes that encapsulate a pointer and override standard pointer operators. They have a number of advantages over regular pointers. They are guaranteed to be initialized as either null pointers or pointers to a heap object. Indirection through a null pointer is checked. No delete is ever necessary. Objects are automatically freed when the last pointer to them has gone away. One significant problem with these smart pointers is that unlike regular pointers, they don't respect inheritance. Smart pointers are unattractive for polymorphic code. Given below is an example for the implementation of smart pointers.
Example:
template <class X>
class smart_pointer
{
public:
smart_pointer(); // makes a null pointer
smart_pointer(const X& x) // makes pointer to copy of x
X& operator *( );
const X& operator*( ) const;
X* operator->() const;
smart_pointer(const smart_pointer <X> &);
const smart_pointer <X> & operator =(const smart_pointer<X>&);
~smart_pointer();
private:
//...
};
This class implement a smart pointer to an object of type X. The object itself is located on the heap. Here is how to use it:
smart_pointer <employee> p= employee("Harris",1333);
Like other overloaded operators, p will behave like a regular pointer,
cout<<*p;
p->raise_salary(0.5);
command = "ps -A | grep 'process_name'"
output = subprocess.check_output(["bash", "-c", command])