There can be corrupted jar file for which it may show error as "ZipFile invalid LOC header (bad signature)" You need to delete all jar files for which it shows the error and add this Dependency
<dependency>
<groupId>javax.servlet</groupId>
<artifactId>servlet-api</artifactId>
<version>3.0-alpha-1</version>
<scope>provided</scope>
</dependency>
For me, restarting Eclipse got rid of this error!
Workbooks.Open
does work too.
Workbooks.Open ActiveWorkbook.Path & "\Temp.csv", Local:=True
this works/is needed because i use Excel in germany and excel does use "," to separate .csv by default because i use an english installation of windows. even if you use the code below excel forces the "," separator.
Workbooks.Open ActiveWorkbook.Path & "\Test.csv", , , 6, , , , , ";"
and Workbooks.Open ActiveWorkbook.Path & "\Temp.csv", , , 4
+variants of this do not work(!)
why do they even have the delimiter parameter if it is blocked by the Local parameter ?! this makes no sense at all. but now it works.
I modified /etc/php.ini
[Date] ; Defines the default timezone used by the date functions ; http://php.net/date.timezone date.timezone =('Asia/kolkata')
and now working fine.
Vipin Pal
To extend the answer a little bit to support local images, just replace FILE_PATH_PLACEHOLDER
to your image path and check it out.
<p align="center">
<img src="FILE_PATH_PLACEHOLDER">
</p>
Try to set ENV PATH. Add PHP path in to ENV PATH.
In order for this extension to work, there are DLL files that must be available to the Windows system PATH. For information on how to do this, see the FAQ entitled "How do I add my PHP directory to the PATH on Windows". Although copying DLL files from the PHP folder into the Windows system directory also works (because the system directory is by default in the system's PATH), this is not recommended. This extension requires the following files to be in the PATH: libeay32.dll
Hadoop is essentially providing a mechanism to perform something similar to what @Ivella is suggesting.
Hadoop's HDFS (Distributed file system) is going to take your 20GB file and save it across the cluster in blocks of a fixed size. Lets say you configure the block size to be 128MB, the file would be split into 20x8x128MB blocks.
You would then run a map reduce program over this data, essentially counting the lines for each block (in the map stage) and then reducing these block line counts into a final line count for the entire file.
As for performance, in general the bigger your cluster, the better the performance (more wc's running in parallel, over more independent disks), but there is some overhead in job orchestration that means that running the job on smaller files will not actually yield quicker throughput than running a local wc
I had a same issue.
from PIL import Image
instead of
import Image
fixed the issue
Thanks, I used @str8up7od answer to create a function today which also checks if the input is empty:
function is_number(input) {
if(input === '')
return false;
let regex = new RegExp(/[^0-9]/, 'g');
return (input.match(regex) === null);
}
Nope, mod_rewrite
is an Apache module and has nothing to do with PHP.
To activate the module, the following line in httpd.conf
needs to be active:
LoadModule rewrite_module modules/mod_rewrite.so
to see whether it is already active, try putting a .htaccess
file into a web directory containing the line
RewriteEngine on
if this works without throwing a 500 internal server error, and the .htaccess
file gets parsed, URL rewriting works.
I'd say, it depends on your situation. For example, I work in local government, and we have lots of images like mugshots, etc. We don't have a high number of users, but we need to have good security and auditing around the data. The database is a better solution for us since it makes this easier and we aren't going to run into scaling problems.
I had exactly the same issue when downloading from S3 very large files.
The example solution from AWS docs just does not work:
var file = fs.createWriteStream(options.filePath);
file.on('close', function(){
if(self.logger) self.logger.info("S3Dataset file download saved to %s", options.filePath );
return callback(null,done);
});
s3.getObject({ Key: documentKey }).createReadStream().on('error', function(err) {
if(self.logger) self.logger.error("S3Dataset download error key:%s error:%@", options.fileName, error);
return callback(error);
}).pipe(file);
While this solution will work:
var file = fs.createWriteStream(options.filePath);
s3.getObject({ Bucket: this._options.s3.Bucket, Key: documentKey })
.on('error', function(err) {
if(self.logger) self.logger.error("S3Dataset download error key:%s error:%@", options.fileName, error);
return callback(error);
})
.on('httpData', function(chunk) { file.write(chunk); })
.on('httpDone', function() {
file.end();
if(self.logger) self.logger.info("S3Dataset file download saved to %s", options.filePath );
return callback(null,done);
})
.send();
The createReadStream
attempt just does not fire the end
, close
or error
callback for some reason. See here about this.
I'm using that solution also for writing down archives to gzip, since the first one (AWS example) does not work in this case either:
var gunzip = zlib.createGunzip();
var file = fs.createWriteStream( options.filePath );
s3.getObject({ Bucket: this._options.s3.Bucket, Key: documentKey })
.on('error', function (error) {
if(self.logger) self.logger.error("%@",error);
return callback(error);
})
.on('httpData', function (chunk) {
file.write(chunk);
})
.on('httpDone', function () {
file.end();
if(self.logger) self.logger.info("downloadArchive downloaded %s", options.filePath);
fs.createReadStream( options.filePath )
.on('error', (error) => {
return callback(error);
})
.on('end', () => {
if(self.logger) self.logger.info("downloadArchive unarchived %s", options.fileDest);
return callback(null, options.fileDest);
})
.pipe(gunzip)
.pipe(fs.createWriteStream(options.fileDest))
})
.send();
A simple pure-Python implementation would be:
import math
import re
from collections import Counter
WORD = re.compile(r"\w+")
def get_cosine(vec1, vec2):
intersection = set(vec1.keys()) & set(vec2.keys())
numerator = sum([vec1[x] * vec2[x] for x in intersection])
sum1 = sum([vec1[x] ** 2 for x in list(vec1.keys())])
sum2 = sum([vec2[x] ** 2 for x in list(vec2.keys())])
denominator = math.sqrt(sum1) * math.sqrt(sum2)
if not denominator:
return 0.0
else:
return float(numerator) / denominator
def text_to_vector(text):
words = WORD.findall(text)
return Counter(words)
text1 = "This is a foo bar sentence ."
text2 = "This sentence is similar to a foo bar sentence ."
vector1 = text_to_vector(text1)
vector2 = text_to_vector(text2)
cosine = get_cosine(vector1, vector2)
print("Cosine:", cosine)
Prints:
Cosine: 0.861640436855
The cosine formula used here is described here.
This does not include weighting of the words by tf-idf, but in order to use tf-idf, you need to have a reasonably large corpus from which to estimate tfidf weights.
You can also develop it further, by using a more sophisticated way to extract words from a piece of text, stem or lemmatise it, etc.
The <TouchableHighlight>
element is the source of the error. The <TouchableHighlight>
element must have a child element.
Try running the code like this:
render() {
const {height, width} = Dimensions.get('window');
return (
<View style={styles.container}>
<Image
style={{
height:height,
width:width,
}}
source={require('image!foo')}
resizeMode='cover'
/>
<TouchableHighlight style={styles.button}>
<Text> This text is the target to be highlighted </Text>
</TouchableHighlight>
</View>
);
}
Only the answers that push the value into the registry affect a permanent change (so the majority of answers on this thread, including the accepted answer, do not permanently affect the Path
).
The following function works for both Path
/ PSModulePath
and for User
/ System
types. It will also add the new path to the current session by default.
function AddTo-Path {
param (
[string]$PathToAdd,
[Parameter(Mandatory=$true)][ValidateSet('System','User')][string]$UserType,
[Parameter(Mandatory=$true)][ValidateSet('Path','PSModulePath')][string]$PathType
)
# AddTo-Path "C:\XXX" "PSModulePath" 'System'
if ($UserType -eq "System" ) { $RegPropertyLocation = 'HKLM:\System\CurrentControlSet\Control\Session Manager\Environment' }
if ($UserType -eq "User" ) { $RegPropertyLocation = 'HKCU:\Environment' } # also note: Registry::HKEY_LOCAL_MACHINE\ format
$PathOld = (Get-ItemProperty -Path $RegPropertyLocation -Name $PathType).$PathType
"`n$UserType $PathType Before:`n$PathOld`n"
$PathArray = $PathOld -Split ";" -replace "\\+$", ""
if ($PathArray -notcontains $PathToAdd) {
"$UserType $PathType Now:" # ; sleep -Milliseconds 100 # Might need pause to prevent text being after Path output(!)
$PathNew = "$PathOld;$PathToAdd"
Set-ItemProperty -Path $RegPropertyLocation -Name $PathType -Value $PathNew
Get-ItemProperty -Path $RegPropertyLocation -Name $PathType | select -ExpandProperty $PathType
if ($PathType -eq "Path") { $env:Path += ";$PathToAdd" } # Add to Path also for this current session
if ($PathType -eq "PSModulePath") { $env:PSModulePath += ";$PathToAdd" } # Add to PSModulePath also for this current session
"`n$PathToAdd has been added to the $UserType $PathType"
}
else {
"'$PathToAdd' is already in the $UserType $PathType. Nothing to do."
}
}
# Add "C:\XXX" to User Path (but only if not already present)
AddTo-Path "C:\XXX" "User" "Path"
# Just show the current status by putting an empty path
AddTo-Path "" "User" "Path"
There's no need to declare new variables in Python. If we're talking about variables in functions or modules, no declaration is needed. Just assign a value to a name where you need it: mymagic = "Magic"
. Variables in Python can hold values of any type, and you can't restrict that.
Your question specifically asks about classes, objects and instance variables though. The idiomatic way to create instance variables is in the __init__
method and nowhere else — while you could create new instance variables in other methods, or even in unrelated code, it's just a bad idea. It'll make your code hard to reason about or to maintain.
So for example:
class Thing(object):
def __init__(self, magic):
self.magic = magic
Easy. Now instances of this class have a magic
attribute:
thingo = Thing("More magic")
# thingo.magic is now "More magic"
Creating variables in the namespace of the class itself leads to different behaviour altogether. It is functionally different, and you should only do it if you have a specific reason to. For example:
class Thing(object):
magic = "Magic"
def __init__(self):
pass
Now try:
thingo = Thing()
Thing.magic = 1
# thingo.magic is now 1
Or:
class Thing(object):
magic = ["More", "magic"]
def __init__(self):
pass
thing1 = Thing()
thing2 = Thing()
thing1.magic.append("here")
# thing1.magic AND thing2.magic is now ["More", "magic", "here"]
This is because the namespace of the class itself is different to the namespace of the objects created from it. I'll leave it to you to research that a bit more.
The take-home message is that idiomatic Python is to (a) initialise object attributes in your __init__
method, and (b) document the behaviour of your class as needed. You don't need to go to the trouble of full-blown Sphinx-level documentation for everything you ever write, but at least some comments about whatever details you or someone else might need to pick it up.
if you have multiple packages with different classes then it will be confusing: try this:
import package_name_from_AndroidManifest.R;
It's not possible to retrieve data from RDBMS for user friends data for data which cross more than half a billion at a constant time so Facebook implemented this using a hash database (no SQL) and they opensourced the database called Cassandra.
So every user has its own key and the friends details in a queue; to know how cassandra works look at this:
You can use:
NOW() + INTERVAL 1 DAY
If you are only interested in the date, not the date and time then you can use CURDATE instead of NOW:
CURDATE() + INTERVAL 1 DAY
You can use the ternary operator notation:
<div id="homePage" ng-class="page.isSelected(1)? 'center' : 'left'">
The way that I have found best - and also to show in Allure report as fail - is to try-catch the findelement and in the catch block, set the assertTrue to false, like this:
try {
element = driver.findElement(By.linkText("Test Search"));
}catch(Exception e) {
assertTrue(false, "Test Search link was not displayed");
}
It looks like Java is trying to convert an empty string into a number. Do you have an empty line at the end of the series of numbers?
You could probably fix the code like this
String s = in.readLine();
int i = 0;
while (s != null) {
// Skip empty lines.
s = s.trim();
if (s.length() == 0) {
continue;
}
tall[i] = Integer.parseInt(s); // This is line 19.
System.out.println(tall[i]);
s = in.readLine();
i++;
}
in.close();
try following to see all instances of python
whereis python
which python
Then remove all instances using:
sudo apt autoremove python
repeat sudo apt autoremove python(for all versions) that should do it, then install Anaconda and manage Pythons however you like if you need to reinstall it.
Try this
Check this How do i get the gmt time in php
date_default_timezone_set("UTC");
echo date("Y-m-d H:i:s", time());
This one works for me:
Arrays.asList(YourEnum.values()).toString().contains("valueToCheck");
I tried reading from input1.txt which was inside one of my packages together with the class which was trying to read it.
The following works:
String fileName = FileTransferClient.class.getResource("input1.txt").getPath();
System.out.println(fileName);
BufferedReader bufferedTextIn = new BufferedReader(new FileReader(fileName));
The most important part was to call getPath()
if you want the correct path name in String format. DO NOT USE toString()
because it will add some extra formatting text which will TOTALLY MESS UP the fileName (you can try it and see the print out).
Spent 2 hours debugging this... :(
CSS3 allows this sort of thing and it looks like this:
body {
background-image: url(images/bgtop.png), url(images/bg.png);
background-repeat: repeat-x, repeat;
}
The current versions of all the major browsers now support it, however if you need to support IE8 or below, then the best way you can work around it is to have extra divs:
<body>
<div id="bgTopDiv">
content here
</div>
</body>
body{
background-image: url(images/bg.png);
}
#bgTopDiv{
background-image: url(images/bgTop.png);
background-repeat: repeat-x;
}
Like answered before, you should use:
Object value = field.get(objectInstance);
Another way, which is sometimes prefered, is calling the getter dynamically. example code:
public static Object runGetter(Field field, BaseValidationObject o)
{
// MZ: Find the correct method
for (Method method : o.getMethods())
{
if ((method.getName().startsWith("get")) && (method.getName().length() == (field.getName().length() + 3)))
{
if (method.getName().toLowerCase().endsWith(field.getName().toLowerCase()))
{
// MZ: Method found, run it
try
{
return method.invoke(o);
}
catch (IllegalAccessException e)
{
Logger.fatal("Could not determine method: " + method.getName());
}
catch (InvocationTargetException e)
{
Logger.fatal("Could not determine method: " + method.getName());
}
}
}
}
return null;
}
Also be aware that when your class inherits from another class, you need to recursively determine the Field. for instance, to fetch all Fields of a given class;
for (Class<?> c = someClass; c != null; c = c.getSuperclass())
{
Field[] fields = c.getDeclaredFields();
for (Field classField : fields)
{
result.add(classField);
}
}
If you want to delete a specific extension recursively, use this:
For /R "C:\Users\Desktop\saleh" %G IN (*.ppt) do del "%G"
I'd recommend reading the header directly from the driver, not through Spark. Two reasons for this: 1) It's a single line. There's no advantage to a distributed approach. 2) We need this line in the driver, not the worker nodes.
It goes something like this:
// Ridiculous amount of code to read one line.
val uri = new java.net.URI(filename)
val conf = sc.hadoopConfiguration
val fs = hadoop.fs.FileSystem.get(uri, conf)
val path = new hadoop.fs.Path(filename)
val stream = fs.open(path)
val source = scala.io.Source.fromInputStream(stream)
val header = source.getLines.head
Now when you make the RDD you can discard the header.
val csvRDD = sc.textFile(filename).filter(_ != header)
Then we can make an RDD from one column, for example:
val idx = header.split(",").indexOf(columnName)
val columnRDD = csvRDD.map(_.split(",")(idx))
read it in the docs.
If you return anything but an int
or None
it will be printed to stderr
.
To get just stderr while discarding stdout do:
output=$(python foo.py 2>&1 >/dev/null)
using (DataContext dc = new DataContext())
{
var q = from t in dc.TableTests
group t by t.SerialNumber
into g
select new
{
SerialNumber = g.Key,
uid = (from t2 in g select t2.uid).Max()
};
}
Try this
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
<style type="text/css">
body {
margin-left: 50px;
margin-top: 50px;
margin-right: 50px;
margin-bottom: 50px;
}
.rotate {
font-family: Arial, Helvetica, sans-serif;
font-size: 16px;
-webkit-transform: rotate(-10deg);
-moz-transform: rotate(-10deg);
-o-transform: rotate(-10deg);
-ms-transform: rotate(-10deg);
-sand-transform: rotate(10deg);
display: block;
position: fixed;
}
</style>
</head>
<body>
<div class="rotate">Alpesh</div>
</body>
</html>
The reason is because you are using the transform property twice. Due to CSS rules with the cascade, the last declaration wins if they have the same specificity. As both transform declarations are in the same rule set, this is the case.
What it is doing is this:
See http://jsfiddle.net/Lx76Y/ and open it in the debugger to see the first declaration overwritten
As the translate is overwriting the rotate, you have to combine them in the same declaration instead: http://jsfiddle.net/Lx76Y/1/
To do this you use a space separated list of transforms:
#rotatedtext {
transform-origin: left;
transform: translate(50%, 50%) rotate(90deg) ;
}
Remember that they are specified in a chain, so the translate is applied first, then the rotate after that.
Other than the append
function, if by "multiple values" you mean another list, you can simply concatenate them like so.
>>> a = [1,2,3]
>>> b = [4,5,6]
>>> a + b
[1, 2, 3, 4, 5, 6]
Have a look at Yahoo! tips: https://developer.yahoo.com/performance/rules.html#expires.
There are also tips by Google: https://developers.google.com/speed/docs/insights/LeverageBrowserCaching
MarvinS.-
Try:
$.ajax({
url: uri+'?js',
success: function(data) {
var imgAttr = $("img", data).attr('src');
var htmlCode = $(data).html();
$('#imgSrc').html(imgAttr);
$('#fullHtmlOutput').html(htmlCode);
}
});
This should load the whole html block from data into #fullHtmlOutput and the src of the image into #imgSrc.
Responding because this answer came up first for search when I was having the same issue:
[08S01][unixODBC][FreeTDS][SQL Server]Unable to connect: Adaptive Server is unavailable or does not exist
MSSQL named instances have to be configured properly without setting the port. (documentation on the freetds config says set instance or port NOT BOTH)
freetds.conf
[Name]
host = Server.com
instance = instance_name
#port = port is found automatically, don't define explicitly
tds version = 8.0
client charset = UTF-8
And in odbc.ini just because you can set Port, DON'T when you are using a named instance.
Further to the answer from ktbos:
I modified the mysqld.cnf file and mysql failed to start. It turned out that I was modifying the wrong file!
So be sure the file you modify contains segment tags like [mysqld_safe] and [mysqld]. Under the latter I did as suggested and added the line:
validate_password_policy=LOW
This worked perfectly to resolve my issue of not requiring special characters within the password.
I use this small extension in Swift 5, which keeps it simple and easy to check for any object that is member of UIView.
extension UIView {
var isVisible: Bool {
guard let _ = self.window else {
return false
}
return true
}
}
Then, I just use it as a simple if statement check...
if myView.isVisible {
// do something
}
I hope it helps! :)
Don't use while True and break statements. It's bad programming.
Imagine you come to debug someone else's code and you see a while True on line 1 and then have to trawl your way through another 200 lines of code with 15 break statements in it, having to read umpteen lines of code for each one to work out what actually causes it to get to the break. You'd want to kill them...a lot.
The condition that causes a while loop to stop iterating should always be clear from the while loop line of code itself without having to look elsewhere.
Phil has the "correct" solution, as it has a clear end condition right there in the while loop statement itself.
TLS (Transport Level Security) is the slightly broader term that has replaced SSL (Secure Sockets Layer) in securing HTTP communications. So what you are being asked to do is enable SSL.
Try shoes. Unfortunately, I have not had a chance to work with it yet, but I have an upcoming project where I plan to use it. It is cross-platform. Also the API looks very Rubyish so I would give it a try.
To trim a list in place without creating copies of it, use del
:
>>> t = [1, 2, 3, 4, 5]
>>> # delete elements starting from index 4 to the end
>>> del t[4:]
>>> t
[1, 2, 3, 4]
>>> # delete elements starting from index 5 to the end
>>> # but the list has only 4 elements -- no error
>>> del t[5:]
>>> t
[1, 2, 3, 4]
>>>
What does it mean?
It means that you should not try to use the same iterator in two threads. If you have two threads that need to iterate over the keys, values or entries, then they each should create and use their own iterators.
What happens if I try to iterate the map with two threads at the same time?
It is not entirely clear what would happen if you broke this rule. You could just get confusing behavior, in the same way that you do if (for example) two threads try to read from standard input without synchronizing. You could also get non-thread-safe behavior.
But if the two threads used different iterators, you should be fine.
What happens if I put or remove a value from the map while iterating it?
That's a separate issue, but the javadoc section that you quoted adequately answers it. Basically, the iterators are thread-safe, but it is not defined whether you will see the effects of any concurrent insertions, updates or deletions reflected in the sequence of objects returned by the iterator. In practice, it probably depends on where in the map the updates occur.
Find complete example of Spring Mvc Validation
import org.springframework.validation.Errors;
import org.springframework.validation.ValidationUtils;
import org.springframework.validation.Validator;
import com.technicalkeeda.bean.Login;
public class LoginValidator implements Validator {
public boolean supports(Class aClass) {
return Login.class.equals(aClass);
}
public void validate(Object obj, Errors errors) {
Login login = (Login) obj;
ValidationUtils.rejectIfEmptyOrWhitespace(errors, "userName",
"username.required", "Required field");
ValidationUtils.rejectIfEmptyOrWhitespace(errors, "userPassword",
"userpassword.required", "Required field");
}
}
public class LoginController extends SimpleFormController {
private LoginService loginService;
public LoginController() {
setCommandClass(Login.class);
setCommandName("login");
}
public void setLoginService(LoginService loginService) {
this.loginService = loginService;
}
@Override
protected ModelAndView onSubmit(Object command) throws Exception {
Login login = (Login) command;
loginService.add(login);
return new ModelAndView("loginsucess", "login", login);
}
}
It is really easy to do a bulk insert in Laravel with or without the query builder. You can use the following official approach.
Entity::upsert([
['name' => 'Pierre Yem Mback', 'city' => 'Eseka', 'salary' => 10000000],
['name' => 'Dial rock 360', 'city' => 'Yaounde', 'salary' => 20000000],
['name' => 'Ndibou La Menace', 'city' => 'Dakar', 'salary' => 40000000]
], ['name', 'city'], ['salary']);
Use
ax.xaxis.tick_top()
to place the tick marks at the top of the image. The command
ax.set_xlabel('X LABEL')
ax.xaxis.set_label_position('top')
affects the label, not the tick marks.
import matplotlib.pyplot as plt
import numpy as np
column_labels = list('ABCD')
row_labels = list('WXYZ')
data = np.random.rand(4, 4)
fig, ax = plt.subplots()
heatmap = ax.pcolor(data, cmap=plt.cm.Blues)
# put the major ticks at the middle of each cell
ax.set_xticks(np.arange(data.shape[1]) + 0.5, minor=False)
ax.set_yticks(np.arange(data.shape[0]) + 0.5, minor=False)
# want a more natural, table-like display
ax.invert_yaxis()
ax.xaxis.tick_top()
ax.set_xticklabels(column_labels, minor=False)
ax.set_yticklabels(row_labels, minor=False)
plt.show()
ThreadLocal
is useful, when you want to have some state that should not be shared amongst different threads, but it should be accessible from each thread during its whole lifetime.
As an example, imagine a web application, where each request is served by a different thread. Imagine that for each request you need a piece of data multiple times, which is quite expensive to compute. However, that data might have changed for each incoming request, which means that you can't use a plain cache. A simple, quick solution to this problem would be to have a ThreadLocal
variable holding access to this data, so that you have to calculate it only once for each request. Of course, this problem can also be solved without the use of ThreadLocal
, but I devised it for illustration purposes.
That said, have in mind that ThreadLocal
s are essentially a form of global state. As a result, it has many other implications and should be used only after considering all the other possible solutions.
Abstract classes are not required to implement the methods. So even though it implements an interface, the abstract methods of the interface can remain abstract. If you try to implement an interface in a concrete class (i.e. not abstract) and you do not implement the abstract methods the compiler will tell you: Either implement the abstract methods or declare the class as abstract.
I do like that:
interface XYZ {
x: number;
y: number;
z: number;
}
const a:XYZ = {x:1, y:2, z:3};
const { x, y, ...last } = a;
const { z, ...firstTwo} = a;
console.log(firstTwo, last);
There is a Refactor --> Rename Bug in Visual Studio 2012 that wrongly renamed the "id" inside the literal string value of the url parameter in my RouteConfig.cs. This caused a 403.14 on a fresh and otherwise correct setup in both Windows Server 2012 and Windows Server 2008 R2.
routes.MapRoute(
name: "Default",
url: "{controller}/{action}/{id}",
defaults: new { controller = "Home", action = "Index", id = UrlParameter.Optional }
);
was changed to
routes.MapRoute(
name: "Default",
url: "{controller}/{action}/{renamed_text}",
defaults: new { controller = "Home", action = "Index", id = UrlParameter.Optional }
);
I got the same error for pandas latest version. Then saw this warning
FutureWarning: 'pandas.tools.plotting.scatter_matrix' is deprecated, import 'pandas.plotting.scatter_matrix' instead.
This shall work for you.
When you do echo $array;
, PHP will simply echo 'Array' since it can't convert an array to a string. So The 'A' that you are actually getting is the first letter of Array, which is correct.
You might actually need
echo json_encode($array);
This should get you what you want.
EDIT : And obviously, you'd need to change your JS to work with JSON instead of just text (as pointed out by @genesis)
Right-click and export as HAR, then view it using Jan Odvarko's HAR Viewer
This helps in visualising the already captured HAR logs.
collect(Collectors.toList());
This is the call which you can use to convert any Stream to List.
more concretely:
List<String> myList = stream.collect(Collectors.toList());
from:
https://www.geeksforgeeks.org/collectors-tolist-method-in-java-with-examples/
Wrong answer - see EDIT at the end
Let me build on Alex's answer.
To prevent the creation of a data object if it doesn't exists, I would better do:
$.fn.hasData = function(key) {
var $this = $(this);
return $.hasData($this) && typeof $this.data(key) !== 'undefined';
};
Then, where $this
has no data object created, $.hasData
returns false
and it will not execute $this.data(key)
.
EDIT: function $.hasData(element)
works only if the data was set using $.data(element, key, value)
, not element.data(key, value)
. Due to that, my answer is not correct.
Why is this happening?
The entire ext/mysql
PHP extension, which provides all functions named with the prefix mysql_
, was officially deprecated in PHP v5.5.0 and removed in PHP v7.
It was originally introduced in PHP v2.0 (November 1997) for MySQL v3.20, and no new features have been added since 2006. Coupled with the lack of new features are difficulties in maintaining such old code amidst complex security vulnerabilities.
The manual has contained warnings against its use in new code since June 2011.
How can I fix it?
As the error message suggests, there are two other MySQL extensions that you can consider: MySQLi and PDO_MySQL, either of which can be used instead of ext/mysql
. Both have been in PHP core since v5.0, so if you're using a version that is throwing these deprecation errors then you can almost certainly just start using them right away—i.e. without any installation effort.
They differ slightly, but offer a number of advantages over the old extension including API support for transactions, stored procedures and prepared statements (thereby providing the best way to defeat SQL injection attacks). PHP developer Ulf Wendel has written a thorough comparison of the features.
Hashphp.org has an excellent tutorial on migrating from ext/mysql
to PDO.
I understand that it's possible to suppress deprecation errors by setting
error_reporting
inphp.ini
to excludeE_DEPRECATED
:error_reporting = E_ALL ^ E_DEPRECATED
What will happen if I do that?
Yes, it is possible to suppress such error messages and continue using the old ext/mysql
extension for the time being. But you really shouldn't do this—this is a final warning from the developers that the extension may not be bundled with future versions of PHP (indeed, as already mentioned, it has been removed from PHP v7). Instead, you should take this opportunity to migrate your application now, before it's too late.
Note also that this technique will suppress all E_DEPRECATED
messages, not just those to do with the ext/mysql
extension: therefore you may be unaware of other upcoming changes to PHP that would affect your application code. It is, of course, possible to only suppress errors that arise on the expression at issue by using PHP's error control operator—i.e. prepending the relevant line with @
—however this will suppress all errors raised by that expression, not just E_DEPRECATED
ones.
You are starting a new project.
There is absolutely no reason to use ext/mysql
—choose one of the other, more modern, extensions instead and reap the rewards of the benefits they offer.
You have (your own) legacy codebase that currently depends upon ext/mysql
.
It would be wise to perform regression testing: you really shouldn't be changing anything (especially upgrading PHP) until you have identified all of the potential areas of impact, planned around each of them and then thoroughly tested your solution in a staging environment.
Following good coding practice, your application was developed in a loosely integrated/modular fashion and the database access methods are all self-contained in one place that can easily be swapped out for one of the new extensions.
Spend half an hour rewriting this module to use one of the other, more modern, extensions; test thoroughly. You can later introduce further refinements to reap the rewards of the benefits they offer.
The database access methods are scattered all over the place and cannot easily be swapped out for one of the new extensions.
Consider whether you really need to upgrade to PHP v5.5 at this time.
You should begin planning to replace ext/mysql
with one of the other, more modern, extensions in order that you can reap the rewards of the benefits they offer; you might also use it as an opportunity to refactor your database access methods into a more modular structure.
However, if you have an urgent need to upgrade PHP right away, you might consider suppressing deprecation errors for the time being: but first be sure to identify any other deprecation errors that are also being thrown.
You are using a third party project that depends upon ext/mysql
.
Consider whether you really need to upgrade to PHP v5.5 at this time.
Check whether the developer has released any fixes, workarounds or guidance in relation to this specific issue; or, if not, pressure them to do so by bringing this matter to their attention. If you have an urgent need to upgrade PHP right away, you might consider suppressing deprecation errors for the time being: but first be sure to identify any other deprecation errors that are also being thrown.
It is absolutely essential to perform regression testing.
In searching silver bullet, found this question. For Ruby on Rails http://github.com/sstephenson/sprockets
One thing to note is that not all libraries will use the same meaning for pi, of course, so it never hurts to know what you're using. For example, the symbolic math library Sympy's representation of pi is not the same as math and numpy:
import math
import numpy
import scipy
import sympy
print(math.pi == numpy.pi)
> True
print(math.pi == scipy.pi)
> True
print(math.pi == sympy.pi)
> False
var a = [];
it is use for brackets for an array of simple values. eg.
var name=["a","b","c"]
var a={}
is use for value arrays and objects/properties also. eg.
var programmer = { 'name':'special', 'url':'www.google.com'}
By default the function returns FALSE (boolean) if the segment does not exist. There is an optional second parameter that permits you to set your own default value if the segment is missing. For example, this would tell the function to return the number zero in the event of failure: $product_id = $this->uri->segment(3, 0);
It helps avoid having to write code like this:
[if ($this->uri->segment(3) === FALSE)
{
$product_id = 0;
}
else
{
$product_id = $this->uri->segment(3);
}]
public static void main(String[] args)
{
String stringForTest = "Apple";
int requiredLengthAfterPadding = 8;
int inputStringLengh = stringForTest.length();
int diff = requiredLengthAfterPadding - inputStringLengh;
if (inputStringLengh < requiredLengthAfterPadding)
{
stringForTest = new String(new char[diff]).replace("\0", "0")+ stringForTest;
}
System.out.println(stringForTest);
}
You can attach a handler which would call as many others as you like:
<a href="#blah" id="myLink"/>
<script type="text/javascript">
function myOtherFunction() {
//do stuff...
}
document.getElementById( 'myLink' ).onclick = function() {
//do stuff...
myOtherFunction();
};
</script>
I have found a slightly different way implement pointers that is perhaps more general and easier to understand from a C perspective (and thus fits more into the format of the users example).
In JavaScript, like in C, array variables are actually just pointers to the array, so you can use an array as exactly the same as declaring a pointer. This way, all pointers in your code can be used the same way, despite what you named the variable in the original object.
It also allows one to use two different notations referring to the address of the pointer and what is at the address of the pointer.
Here is an example (I use the underscore to denote a pointer):
var _x = [ 10 ];
function foo(_a){
_a[0] += 10;
}
foo(_x);
console.log(_x[0]);
Yields
output: 20
Found the solution as below.... posting it as it could help somebody else too :)
DateFormat format = new SimpleDateFormat("yyyy-MM-dd hh:mm:ss");
Date date = format.parse("2014-04-24 11:15:00");
GregorianCalendar cal = new GregorianCalendar();
cal.setTime(date);
XMLGregorianCalendar xmlGregCal = DatatypeFactory.newInstance().newXMLGregorianCalendar(cal);
System.out.println(xmlGregCal);
Output:
2014-04-24T11:15:00.000+02:00
I think the bulletproof way is:
if (typeof $.cookie('token') === 'undefined'){
//no cookie
} else {
//have cookie
}
Checking the type of a null, empty or undefined var always returns 'undefined'
Edit: You can get there even easier:
if (!!$.cookie('token')) {
// have cookie
} else {
// no cookie
}
!!
will turn the falsy values to false. Bear in mind that this will turn 0
to false!
This is a way:
Using apktool
to decode:
$ apktool d -f {apkfile} -o {output folder}
Next, using JADX (at github.com/skylot/jadx)
$ jadx -d {output folder} {apkfile}
2 tools extract and decompiler to same output folder.
(Make sure to install react-router using npm!)
To use react-router, you do the following:
Create a file with routes defined using Route, IndexRoute components
Inject the Router (with 'r'!) component as the top-level component for your app, passing the routes defined in the routes file and a type of history (hashHistory, browserHistory)
Step 1 routes.js
import React from 'react';
import { Route, IndexRoute } from 'react-router';
/**
* Import all page components here
*/
import App from './components/App';
import MainPage from './components/MainPage';
import SomePage from './components/SomePage';
import SomeOtherPage from './components/SomeOtherPage';
/**
* All routes go here.
* Don't forget to import the components above after adding new route.
*/
export default (
<Route path="/" component={App}>
<IndexRoute component={MainPage} />
<Route path="/some/where" component={SomePage} />
<Route path="/some/otherpage" component={SomeOtherPage} />
</Route>
);
Step 2 entry point (where you do your DOM injection)
// You can choose your kind of history here (e.g. browserHistory)
import { Router, hashHistory as history } from 'react-router';
// Your routes.js file
import routes from './routes';
ReactDOM.render(
<Router routes={routes} history={history} />,
document.getElementById('your-app')
);
Step 3 The App component (props.children)
In the render for your App component, add {this.props.children}:
render() {
return (
<div>
<header>
This is my website!
</header>
<main>
{this.props.children}
</main>
<footer>
Your copyright message
</footer>
</div>
);
}
Step 4 Use Link for navigation
Anywhere in your component render function's return JSX value, use the Link component:
import { Link } from 'react-router';
(...)
<Link to="/some/where">Click me</Link>
SupressFinalize
tells the system that whatever work would have been done in the finalizer has already been done, so the finalizer doesn't need to be called. From the .NET docs:
Objects that implement the IDisposable interface can call this method from the IDisposable.Dispose method to prevent the garbage collector from calling Object.Finalize on an object that does not require it.
In general, most any Dispose()
method should be able to call GC.SupressFinalize()
, because it should clean up everything that would be cleaned up in the finalizer.
SupressFinalize
is just something that provides an optimization that allows the system to not bother queuing the object to the finalizer thread. A properly written Dispose()
/finalizer should work properly with or without a call to GC.SupressFinalize()
.
UPDATE:
compile 'com.android.volley:volley:1.0.0'
OLD ANSWER: You need the next in your build.gradle of your app module:
dependencies {
compile 'com.mcxiaoke.volley:library:1.0.19'
(Rest of your dependencies)
}
This is not the official repo but is a highly trusted one.
In Bash:
if [[ ( $g == 1 && $c == 123 ) || ( $g == 2 && $c == 456 ) ]]
use the following
It will return a true or false
theObject instanceof Object
According to ruby doc http://www.ruby-doc.org/core-1.9.3/Hash.html#method-i-key key(value) is the method to find the key on the base of value.
ROLE = {"customer" => 1, "designer" => 2, "admin" => 100}
ROLE.key(2)
it will return the "designer".
Tony is a pure genius. However to achieve even better auto-completion try setting the triggers to this:
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz =.(!+-*/~,[{@#$%^&
(specifically aranged in order of usage for faster performance :)
dump this into a more specific collection of just the ids you don't want
var notTheseBarIds = filterBars.Select(fb => fb.BarId);
then try this:
fooSelect = (from f in fooBunch
where !notTheseBarIds.Contains(f.BarId)
select f).ToList();
or this:
fooSelect = fooBunch.Where(f => !notTheseBarIds.Contains(f.BarId)).ToList();
I got this when I had the lib in my build path, but not in my deployment assembly. Also when I had a missing context.xml.
If that is the entire line, it very well might be because you are missing a ;
at the end of the line.
The easiest is using easy_install.
easy_install bs4
It will work if pip fails.
we can create nested cte.please see the below cte in example
;with cte_data as
(
Select * from [HumanResources].[Department]
),cte_data1 as
(
Select * from [HumanResources].[Department]
)
select * from cte_data,cte_data1
Mount a "volume" and copy the artifacts into there:
mkdir artifacts
docker run -i -v ${PWD}/artifacts:/artifacts ubuntu:14.04 sh << COMMANDS
# ... build software here ...
cp <artifact> /artifacts
# ... copy more artifacts into `/artifacts` ...
COMMANDS
Then when the build finishes and the container is no longer running, it has already copied the artifacts from the build into the artifacts
directory on the host.
Caveat: When you do this, you may run into problems with the user id of the docker user matching the user id of the current running user. That is, the files in /artifacts
will be shown as owned by the user with the UID of the user used inside the docker container. A way around this may be to use the calling user's UID:
docker run -i -v ${PWD}:/working_dir -w /working_dir -u $(id -u) \
ubuntu:14.04 sh << COMMANDS
# Since $(id -u) owns /working_dir, you should be okay running commands here
# and having them work. Then copy stuff into /working_dir/artifacts .
COMMANDS
What solves my problem: I am using 64 bit Windows 7, so I thought I could install 64 bit Wamp. After I Installed the 32-bit version the error does not appear. So something in the developing process at Wamp went wrong...
If your table is quite big better not use the statement:
alter table goods add column `id` int(10) unsigned primary KEY AUTO_INCREMENT;
because it makes a copy of all data in a temporary table, alter table and then copies it back. Better do it manually. Rename your table:
rename table goods to goods_old;
create new table with primary key and all necessary indexes:
create table goods (
id int(10) unsigned not null AUTO_INCREMENT
... other columns ...
primary key (id)
);
move all data from the old table into new, disabling keys and indexes to speed up copying:
-- USE THIS FOR MyISAM TABLES:
SET UNIQUE_CHECKS=0;
ALTER TABLE goods DISABLE KEYS;
INSERT INTO goods (... your column names ...) SELECT ... your column names FROM goods_old;
ALTER TABLE goods ENABLE KEYS;
SET UNIQUE_CHECKS=1;
-- USE THIS FOR InnoDB TABLES:
SET AUTOCOMMIT = 0; SET UNIQUE_CHECKS=0; SET FOREIGN_KEY_CHECKS=0;
INSERT INTO goods (... your column names ...) SELECT ... your column names FROM goods_old;
SET FOREIGN_KEY_CHECKS=1; SET UNIQUE_CHECKS=1; COMMIT; SET AUTOCOMMIT = 1;
It takes 2 000 seconds to add PK to a table with ~200 mln rows.
With MySQL Workbench you can use Data Export to dump just the table to a local SQL file (Data Only, Structure Only or Structure and Data) and then Data Import to load it into the other DB.
You can have multiple connections (different hosts, databases, users) open at the same time.
It's document.getElementById()
and not document.getElementByID()
. Check the casing for Id
.
working solution with flex-box
for posterity:
main points:
wrapper {
width: 80;
height: 80;
overflow: hidden;
align-items: center;
justify-content: center;
}
image {
width: min-content;
height: min-content;
}
You should check with SMTP.
That means you have to connect to that email's SMTP server.
After connecting to the SMTP server you should send these commands:
HELO somehostname.com
MAIL FROM: <[email protected]>
RCPT TO: <[email protected]>
If you get "<[email protected]> Relay access denied" that means this email is Invalid.
There is a simple PHP class. You can use it:
http://www.phpclasses.org/package/6650-PHP-Check-if-an-e-mail-is-valid-using-SMTP.html
When I do this, I get a very small square screen instead of a maxed screen. Yet, when I only use the FormWindowState.Maximized, it does give me a full screen. Why is that?
public partial class Testscherm : Form
{
public Testscherm()
{
this.WindowState = FormWindowState.Maximized;
this.MaximizeBox = false;
this.MinimizeBox = false;
this.MinimumSize = this.Size;
this.MaximumSize = this.Size;
this.FormBorderStyle = System.Windows.Forms.FormBorderStyle.FixedSingle;
InitializeComponent();
}
To further iterate on Mik's answer, you could also recursivey attach a parent to all nested objects.
var myApp = {
init: function() {
for (var i in this) {
if (typeof this[i] == 'object') {
this[i].init = this.init;
this[i].init();
this[i].parent = this;
}
}
return this;
},
obj1: {
obj2: {
notify: function() {
console.log(this.parent.parent.obj3.msg);
}
}
},
obj3: {
msg: 'Hello'
}
}.init();
myApp.obj1.obj2.notify();
Internet Explorer, Safari, Chrome and Opera users need to remember to explicidly set the line-height value in CSS. I do a stylesheet that sets the initial properites for all text boxes as follows.
<style>
TEXTAREA { line-height: 14px; font-size: 12px; font-family: arial }
</style>
You have a truncated array representation. Let's look at a full example:
>>> a = np.zeros((2, 3, 4))
>>> a
array([[[ 0., 0., 0., 0.],
[ 0., 0., 0., 0.],
[ 0., 0., 0., 0.]],
[[ 0., 0., 0., 0.],
[ 0., 0., 0., 0.],
[ 0., 0., 0., 0.]]])
Arrays in NumPy are printed as the word array
followed by structure, similar to embedded Python lists. Let's create a similar list:
>>> l = [[[ 0., 0., 0., 0.],
[ 0., 0., 0., 0.],
[ 0., 0., 0., 0.]],
[[ 0., 0., 0., 0.],
[ 0., 0., 0., 0.],
[ 0., 0., 0., 0.]]]
>>> l
[[[0.0, 0.0, 0.0, 0.0], [0.0, 0.0, 0.0, 0.0], [0.0, 0.0, 0.0, 0.0]],
[[0.0, 0.0, 0.0, 0.0], [0.0, 0.0, 0.0, 0.0], [0.0, 0.0, 0.0, 0.0]]]
The first level of this compound list l
has exactly 2 elements, just as the first dimension of the array a
(# of rows). Each of these elements is itself a list with 3 elements, which is equal to the second dimension of a
(# of columns). Finally, the most nested lists have 4 elements each, same as the third dimension of a
(depth/# of colors).
So you've got exactly the same structure (in terms of dimensions) as in Matlab, just printed in another way.
Some caveats:
Matlab stores data column by column ("Fortran order"), while NumPy by default stores them row by row ("C order"). This doesn't affect indexing, but may affect performance. For example, in Matlab efficient loop will be over columns (e.g. for n = 1:10 a(:, n) end
), while in NumPy it's preferable to iterate over rows (e.g. for n in range(10): a[n, :]
-- note n
in the first position, not the last).
If you work with colored images in OpenCV, remember that:
2.1. It stores images in BGR format and not RGB, like most Python libraries do.
2.2. Most functions work on image coordinates (x, y
), which are opposite to matrix coordinates (i, j
).
My answer is little late but simple; but may help someone in future; I did experiment with angular versions such as 4.4.3, 5.1+, 6.x, 7.x, 8.x, 9.x and 10.x using $event (latest at the moment)
Template:
<select (change)="onChange($event)">
<option *ngFor="let v of values" [value]="v.id">{{v.name}}</option>
</select>
TS
export class MyComponent {
public onChange(event): void { // event will give you full breif of action
const newVal = event.target.value;
console.log(newVal);
}
}
Using Google Finance as an example to retrieve the ticker's last close price and the updated date & time. You may visit YouTiming.com for the run-time execution.
The service:
MyApp.service('getData',
[
'$http',
function($http) {
this.getQuote = function(ticker) {
var _url = 'https://www.google.com/finance/info?q=' + ticker;
return $http.get(_url); //Simply return the promise to the caller
};
}
]
);
The controller:
MyApp.controller('StockREST',
[
'$scope',
'getData', //<-- the service above
function($scope, getData) {
var getQuote = function(symbol) {
getData.getQuote(symbol)
.success(function(response, status, headers, config) {
var _data = response.substring(4, response.length);
var _json = JSON.parse(_data);
$scope.stockQuoteData = _json[0];
// ticker: $scope.stockQuoteData.t
// last price: $scope.stockQuoteData.l
// last updated time: $scope.stockQuoteData.ltt, such as "7:59PM EDT"
// last updated date & time: $scope.stockQuoteData.lt, such as "Sep 29, 7:59PM EDT"
})
.error(function(response, status, headers, config) {
console.log('@@@ Error: in retrieving Google Finance stock quote, ticker = ' + symbol);
});
};
getQuote($scope.ticker.tick.name); //Initialize
$scope.getQuote = getQuote; //as defined above
}
]
);
The HTML:
<span>{{stockQuoteData.l}}, {{stockQuoteData.lt}}</span>
At the top of YouTiming.com home page, I have placed the notes for how to disable the CORS policy on Chrome and Safari.
Modifying, or more correctly, adding additional HTTP headers is a great code debugging tool if nothing else.
When a URL request returns a redirect or an image there is no html "page" to temporarily write the results of debug code to - at least not one that is visible in a browser.
One approach is to write the data to a local log file and view that file later. Another is to temporarily add HTTP headers reflecting the data and variables being debugged.
I regularly add extra HTTP headers like X-fubar-somevar: or X-testing-someresult: to test things out - and have found a lot of bugs that would have otherwise been very difficult to trace.
You can pass the tv_sec parameter to some of the formatting function. Have a look at gmtime, localtime(). Then look at snprintf.
You can do it like this:
In your main view controller:
func showModal() {
let modalViewController = ModalViewController()
modalViewController.modalPresentationStyle = .overCurrentContext
presentViewController(modalViewController, animated: true, completion: nil)
}
In your modal view controller:
class ModalViewController: UIViewController {
override func viewDidLoad() {
view.backgroundColor = UIColor.clearColor()
view.opaque = false
}
}
If you are working with a storyboard:
Just add a Storyboard Segue with Kind
set to Present Modally
to your modal view controller and on this view controller set the following values:
As Crashalot pointed out in his comment: Make sure the segue only uses Default
for both Presentation
and Transition
. Using Current Context
for Presentation
makes the modal turn black instead of remaining transparent.
var obj = db.Items.Where...
var orderBYItemId = obj.OrderByDescending(c => Convert.ToInt32(c.ID));
JFrame.dispose()
public void dispose()
Releases all of the native screen resources used by this Window, its subcomponents, and all of its owned children. That is, the resources for these Components will be destroyed, any memory they consume will be returned to the OS, and they will be marked as undisplayable. The Window and its subcomponents can be made displayable again by rebuilding the native resources with a subsequent call to pack or show. The states of the recreated Window and its subcomponents will be identical to the states of these objects at the point where the Window was disposed (not accounting for additional modifications between those actions).
Note: When the last displayable window within the Java virtual machine (VM) is disposed of, the VM may terminate. See AWT Threading Issues for more information.
System.exit()
public static void exit(int status)
Terminates the currently running Java Virtual Machine. The argument serves as a status code; by convention, a nonzero status code indicates abnormal termination. This method calls the exit method in class Runtime. This method never returns normally.
The call System.exit(n)
is effectively equivalent to the call:
Runtime.getRuntime().exit(n)
$route: This is used for deep-linking URLs to controllers and views (HTML partials) and watches $location.url() in order to map the path from an existing definition of route.
When we use ngRoute, the route is configured with $routeProvider and when we use ui-router, the route is configured with $stateProvider and $urlRouterProvider.
<div ng-view></div>
$routeProvider
.when('/contact/', {
templateUrl: 'app/views/core/contact/contact.html',
controller: 'ContactCtrl'
});
<div ui-view>
<div ui-view='abc'></div>
<div ui-view='abc'></div>
</div>
$stateProvider
.state("contact", {
url: "/contact/",
templateUrl: '/app/Aisel/Contact/views/contact.html',
controller: 'ContactCtrl'
});
str.Substring(str.Length - 5)
I'm a big fan of Business Rules Engines, since it can help you make your life much easier as a programmer. One of the first experiences I've had while working on a Data Warehouse project was to find Stored Procedures containing complicated CASE structures stretching over entire pages. It was a nightmare to debug, since it was very difficult to understand the logic applied in such long CASE structures, and to determine if you have an overlapping between a rule at page 1 of the code and another from page 5. Overall, we had more than 300 such rules embedded in the code.
When we've received a new development requirement, for something called Accounting Destination, which was involving treating more than 3000 rules, i knew something had to change. Back then I've been working on a prototype which later on become the parent of what now is a Custom Business Rule engine, capable of handling all SQL standard operators. Initially we've been using Excel as an authoring tool and , later on, we've created an ASP.net application which will allow the Business Users to define their own business rules, without the need of writing code. Now the system works fine, with very few bugs, and contains over 7000 rules for calculating this Accounting Destination. I don't think such scenario would have been possible by just hard-coding. And the users are pretty happy that they can define their own rules without IT becoming their bottleneck.
Still, there are limits to such approach:
More details on this topic can be found on a post I've written: http://dwhbp.com/post/2011/10/30/Implementing-a-Business-Rule-Engine.aspx
Overall, the biggest advantage of using a Business Rule Engines is that it allows the users to take back control over the Business Rule definitions and authoring, without the need of going to the IT department each time they need to modify something. It also the reduces the workload over IT development teams, which can now focus on building stuff with more added value.
Cheers,
Nicolae
Maybe not so common solution but for me restarting the IDE worked just fine. I use Android Studio 2.2.3.
grep $PATTERN *
would be sufficient. By default, grep would skip all subdirectories. However, if you want to grep through them, grep -r $PATTERN *
is the case.
For a more generic and extensible way check mergedict. It uses singledispatch
and can merge values based on its types.
Example:
from mergedict import MergeDict
class SumDict(MergeDict):
@MergeDict.dispatch(int)
def merge_int(this, other):
return this + other
d2 = SumDict({'a': 1, 'b': 'one'})
d2.merge({'a':2, 'b': 'two'})
assert d2 == {'a': 3, 'b': 'two'}
I'm probably coming a bit too late with this answer, but the accepted answer only works for checking whether a "hard-coded string" is a part of the search string.
For dynamic search, you would have to do this:
SET searchString=abcd1234
SET key=cd123
CALL SET keyRemoved=%%searchString:%key%=%%
IF NOT "x%keyRemoved%"=="x%searchString%" (
ECHO Contains.
)
Note: You can take the two variables as arguments.
For whatever reason, marking WebDAVModule as "remove" in my web.config wasn't enough to fix the problem in my case.
I've found another approach that did solve the problem. If you're in the same boat, try this:
This prevents WebDAV from rejecting verbs that it doesn't support, thus allowing a PUT to flow through to your RESTful handler unmolested.
SQL Statement:
SELECT * FROM employee WHERE employeeName LIKE 'A%';
Result:
Number of Records: 4
employeeID employeeName employeeName Address City PostalCode Country
1 Alam Wipro Delhi Delhi 11005 India
2 Aditya Wipro Delhi Delhi 11005 India
3 Alok HCL Delhi Delhi 11005 India
4 Ashok IBM Delhi Delhi 11005 India
Using directive it becomes easy and can be used throughout the application
HTML
<input type="text" placeholder="Enter value" numbersOnly>
As .keyCode()
and .which()
are deprecated, codes are checked using .key()
Referred from
Directive:
@Directive({
selector: "[numbersOnly]"
})
export class NumbersOnlyDirective {
@Input() numbersOnly:boolean;
navigationKeys: Array<string> = ['Backspace']; //Add keys as per requirement
constructor(private _el: ElementRef) { }
@HostListener('keydown', ['$event']) onKeyDown(e: KeyboardEvent) {
if (
// Allow: Delete, Backspace, Tab, Escape, Enter, etc
this.navigationKeys.indexOf(e.key) > -1 ||
(e.key === 'a' && e.ctrlKey === true) || // Allow: Ctrl+A
(e.key === 'c' && e.ctrlKey === true) || // Allow: Ctrl+C
(e.key === 'v' && e.ctrlKey === true) || // Allow: Ctrl+V
(e.key === 'x' && e.ctrlKey === true) || // Allow: Ctrl+X
(e.key === 'a' && e.metaKey === true) || // Cmd+A (Mac)
(e.key === 'c' && e.metaKey === true) || // Cmd+C (Mac)
(e.key === 'v' && e.metaKey === true) || // Cmd+V (Mac)
(e.key === 'x' && e.metaKey === true) // Cmd+X (Mac)
) {
return; // let it happen, don't do anything
}
// Ensure that it is a number and stop the keypress
if (e.key === ' ' || isNaN(Number(e.key))) {
e.preventDefault();
}
}
}
you have to do like this in your project level gradle file
allprojects {
repositories {
jcenter()
maven { url "http://dl.appnext.com/" }
maven { url "https://maven.google.com" }
}
}
It formats the string as two uppercase hexadecimal characters.
In more depth, the argument "X2"
is a "format string" that tells the ToString()
method how it should format the string. In this case, "X2" indicates the string should be formatted in Hexadecimal.
byte.ToString()
without any arguments returns the number in its natural decimal representation, with no padding.
Microsoft documents the standard numeric format strings which generally work with all primitive numeric types' ToString()
methods. This same pattern is used for other types as well: for example, standard date/time format strings can be used with DateTime.ToString()
.
If all other options have failed, trying recreating the data import task and/or the connection manager. If you've made any changes since the task was originally created, this can sometimes do the trick. I know it's the equivalent of rebooting, but, hey, if it works, it works.
Another thing worth mentioning: while the answer above works just fine when our task is in the background, the only way I could make it work if our task (made of service + some activities) was in the foreground (i.e. one of our activities visible to user) was like this:
Intent intent = new Intent(storedActivity, MyActivity.class);
intent.setAction(Intent.ACTION_VIEW);
intent.setFlags(Intent.FLAG_ACTIVITY_NEW_TASK);
intent.setFlags(Intent.FLAG_ACTIVITY_REORDER_TO_FRONT);
storedActivity.startActivity(intent);
I do not know whether ACTION_VIEW or FLAG_ACTIVITY_NEW_TASK are of any actual use here. The key to succeeding was
storedActivity.startActivity(intent);
and of course FLAG_ACTIVITY_REORDER_TO_FRONT for not instantiating the activity again. Best of luck!
use this
final int childCount = mainL.getChildCount();
for (int i = 0; i < childCount; i++) {
View element = mainL.getChildAt(i);
// EditText
if (element instanceof EditText) {
EditText editText = (EditText)element;
System.out.println("ELEMENTS EditText getId=>"+editText.getId()+ " getTag=>"+element.getTag()+
" getText=>"+editText.getText());
}
// CheckBox
if (element instanceof CheckBox) {
CheckBox checkBox = (CheckBox)element;
System.out.println("ELEMENTS CheckBox getId=>"+checkBox.getId()+ " getTag=>"+checkBox.getTag()+
" getText=>"+checkBox.getText()+" isChecked=>"+checkBox.isChecked());
}
// DatePicker
if (element instanceof DatePicker) {
DatePicker datePicker = (DatePicker)element;
System.out.println("ELEMENTS DatePicker getId=>"+datePicker.getId()+ " getTag=>"+datePicker.getTag()+
" getDayOfMonth=>"+datePicker.getDayOfMonth());
}
// Spinner
if (element instanceof Spinner) {
Spinner spinner = (Spinner)element;
System.out.println("ELEMENTS Spinner getId=>"+spinner.getId()+ " getTag=>"+spinner.getTag()+
" getSelectedItemId=>"+spinner.getSelectedItemId()+
" getSelectedItemPosition=>"+spinner.getSelectedItemPosition()+
" getTag(key)=>"+spinner.getTag(spinner.getSelectedItemPosition()));
}
}
The answers listed are partial according to me. I have linked below two examples of how to do this in Angular and with JQuery.
This solution has the following features:
JQuery: http://plnkr.co/edit/VZ0o2FJQHTmOMfSPRqpH?p=preview
$("input").blur(function() {
if ($(this).attr("data-selected-all")) {
//Remove atribute to allow select all again on focus
$(this).removeAttr("data-selected-all");
}
});
$("input").click(function() {
if (!$(this).attr("data-selected-all")) {
try {
$(this).selectionStart = 0;
$(this).selectionEnd = $(this).value.length + 1;
//add atribute allowing normal selecting post focus
$(this).attr("data-selected-all", true);
} catch (err) {
$(this).select();
//add atribute allowing normal selecting post focus
$(this).attr("data-selected-all", true);
}
}
});
Angular: http://plnkr.co/edit/llcyAf?p=preview
var app = angular.module('app', []);
//add select-all-on-click to any input to use directive
app.directive('selectAllOnClick', [function() {
return {
restrict: 'A',
link: function(scope, element, attrs) {
var hasSelectedAll = false;
element.on('click', function($event) {
if (!hasSelectedAll) {
try {
//iOS, Safari, thows exception on Chrome etc
this.selectionStart = 0;
this.selectionEnd = this.value.length + 1;
hasSelectedAll = true;
} catch (err) {
//Non iOS option if not supported, e.g. Chrome
this.select();
hasSelectedAll = true;
}
}
});
//On blur reset hasSelectedAll to allow full select
element.on('blur', function($event) {
hasSelectedAll = false;
});
}
};
}]);
dirty size improvement of Bekim Bacaj answer
div { border: 1px solid ; margin: 5px }
_x000D_
<div id="source" onclick="destination.appendChild(this)">click me</div>_x000D_
<div id="destination" >...</div>
_x000D_
The other answers detail the reason for the error. A possible cause (to check) may be your class has a variable and method with the same name, which you then call. Python accesses the variable as a callable - with ()
.
e.g. Class A defines self.a
and self.a()
:
>>> class A:
... def __init__(self, val):
... self.a = val
... def a(self):
... return self.a
...
>>> my_a = A(12)
>>> val = my_a.a()
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
TypeError: 'int' object is not callable
>>>
Member functions that do not modify the class instance should be declared as const
:
int getId() const {
return id;
}
string getName() const {
return name;
}
Anytime you see "discards qualifiers", it's talking about const
or volatile
.
Application Server:
Application server maintains the application logic and
serves the web pages in response to user request.
That means application server can do both application logic maintanence and web page serving.
Web Server:
Web server just serves the web pages and it cannot enforce any application logic.
Final conclusion is: Application server also contains the web server.
For further Reference : http://www.javaworld.com/javaqa/2002-08/01-qa-0823-appvswebserver.html
You'll probably find you're setting the date to Feb 31, 2009 (if today is Jan 31) and Javascript automagically rolls that into the early part of March.
Check the day of the month, I'd expect it to be 1, 2 or 3. If it's not the same as before you added a month, roll back by one day until the month changes again.
That way, the day "last day of Jan" becomes "last day of Feb".
EDIT:
Ronald, based on your comments to other answers, you might want to steer clear of edge-case behavior such as "what happens when I try to make Feb 30" or "what happens when I try to make 2009/13/07 (yyyy/mm/dd)" (that last one might still be a problem even for my solution, so you should test it).
Instead, I would explicitly code for the possibilities. Since you don't care about the day of the month (you just want the year and month to be correct for next month), something like this should suffice:
var now = new Date();
if (now.getMonth() == 11) {
var current = new Date(now.getFullYear() + 1, 0, 1);
} else {
var current = new Date(now.getFullYear(), now.getMonth() + 1, 1);
}
That gives you Jan 1 the following year for any day in December and the first day of the following month for any other day. More code, I know, but I've long since grown tired of coding tricks for efficiency, preferring readability unless there's a clear requirement to do otherwise.
You also can do it using Data Export tool in dbForge Studio for MySQL.
It will allow you to select some or all tables and export them into CSV format.
Mutex
Mutexes are typically used to serialise access to a section of re-entrant code that cannot be executed concurrently by more than one thread. A mutex object only allows one thread into a controlled section, forcing other threads which attempt to gain access to that section to wait until the first thread has exited from that section.Proper use of a mutex is to protect a shared resource can have a dangerous unintended side effect. Any two RTOS tasks that operate at different priorities and coordinate via a mutex, create the opportunity for priority inversion. Mutex works in user space.
Semaphore
Semaphore is a signalling mechanism. Semaphore restricts the number of simultaneous users of a shared resource up to a maximum number. Threads can request access to the resource (decrementing the semaphore) and can signal that they have finished using the resource (incrementing the semaphore). It allows number of thread to access shared resources.The correct use of a semaphore is for signaling from one task to another.semaphores can also be used to signal from an interrupt service routine (ISR) to a task. Signaling a semaphore is a non-blocking RTOS behavior and thus ISR safe. Because this technique eliminates the error-prone need to disable interrupts at the task level.This works in kernel space.
try
var id;
var vname;
function ajaxCall(){
for(var q = 1; q<=10; q++){
$.ajax({
url: 'api.php',
data: 'id1='+q+'',
dataType: 'json',
success: function(data)
{
id = data[0];
vname = data[1];
printWithAjax();
}
});
}//end of the for statement
}//end of ajax call function
Old question but anyway !
Same thing happen to me this morning, everything was working fine for weeks before...... yes guess what ... I change my windows PC user account password yesterday night !!!!! (how stupid was I !!!)
So easy fix : IIS -> authentication -> Anonymous authentication -> edit and set the user and new PASSWORD !!!!!
Line Comment hold both: Cmd + /
Block Comment hold all three: Cmd + Alt + /
Line Comment hold both: Cmd + + =
Block Comment hold all three: Cmd + Alt + + =
Line Comment hold both: Ctrl + /
Block Comment hold all three: Ctrl + Shift + /
Same way to remove the comment block.
To Provide Method Documentation comment type /**
and press Enter just above the method name (
It will create a block comment with parameter list and return type like this
/**
* @param userId
* @return
*/
public int getSubPlayerCountForUser(String userId){}
This worked for me: (notice that java 8 is required)
String requestData = request.getReader().lines().collect(Collectors.joining());
UserJsonParser u = gson.fromJson(requestData, UserJsonParser.class);
UserJsonParse is a class that shows gson how to parse the json formant.
class is like that:
public class UserJsonParser {
private String username;
private String name;
private String lastname;
private String mail;
private String pass1;
//then put setters and getters
}
the json string that is parsed is like that:
$jsonData: { "username": "testuser", "pass1": "clave1234" }
The rest of values (mail, lastname, name) are set to null
You use pluginManagement
in a parent pom
to configure it in case any child pom
wants to use it, but not every child plugin wants to use it. An example can be that your super pom
defines some options for the maven Javadoc plugin.
Not each child pom
might want to use Javadoc, so you define those defaults in a pluginManagement
section. The child pom that wants to use the Javadoc plugin, just defines a plugin section and will inherit the configuration from the pluginManagement
definition in the parent pom
.
A lot of answers I see. This is mine, and I think quite useful if you are working on Mac.
I'm sure you know there are some "bundle" files (.app, .rtfd, .workflow, and so on). And looking at Finder's window they seem single files. But they are not. And $ ls
or $ find
see them as directories... So, unless you need list their contents as well, this works for me:
find . -not -name ".*" -not -name "." | egrep -v "\.rtfd/|\.app/|\.lpdf/|\.workflow/"
Of course this is for the working dir, and you could add other bundles' extensions (but always with a /
after them). Or any other extensions if not bundle's without the /
.
Rather interesting the ".lpdf/
" (multilingual pdf). It has normal ".pdf
" extension (!!) or none in Finder. This way you get (or it just counts 1 file) for this pdf
and not a bunch of stuff…
You cannot directly copy a table into a destination server database from a different database if source db is not in your linked servers. But one way is possible that, generate scripts (schema with data) of the desired table into one table temporarily in the source server DB, then execute the script in the destination server DB to create a table with your data. Finally use INSERT INTO [DESTINATION_TABLE] select * from [TEMPORARY_SOURCE_TABLE]. After getting the data into your destination table drop the temporary one.
I found this solution when I faced the same situation. Hope this helps you too.
The following works perfectly! I just used it, try it out.
date_format(date,'%Y-%c')
One more thing to add to the list as this is the first result that comes up with a google search of 'Error: [$injector:modulerr] angular':
If you have a mismatch between your app name in your 'index'html' and in your main javascript app definition this can also generate this error.
For example if your HTML looks like this:
</head>
<body ng-app="myWebSite">
<!-- My Web Site -->
<p>About my web site...</p>
etc ...
And your JavaScript looks like this (i.e has a typo on app name - myWebCite instead of myWebSite):
/** Main AngularJS Web Application */
var app = angular.module('myWebCite', [ 'ngRoute' ]);
/** Configure the Routes */
app.config(['$routeProvider', function ($routeProvider) {
etc ...
then the 'Error:[$injector:modulerr] angular' error will be generated also.
When we read the MS Excel's numeric cell value using Apache POI library, it read it as numeric. But sometime we want it to read as string (e.g. phone numbers, etc.). This is how I did it:
Insert a new column with first cell =CONCATENATE("!",D2). I assume D2 is cell id of your phone-number column. Drag new cell up to end.
Now if you read the cell using POI, it will read the formula instead of calculated value. Now do following:
Add another column
Select complete column created in step 1. and choose Edit->COPY
Go to top cell of column created in step 3. and Select Edit->Paste Special
In the opened window, Select "Values" radio button
Select "OK"
Now read using POI API ... after reading in Java ... just remove the first character i.e. "!"
I found this very difficult to get an answer to but eventually figured it out. So I will write the steps below.
Before you setup your connection string in code, ensure you actually can access your database. Start obviously by logging into the database server using SSMS (Sql Server Management Studio or it's equivalent in other databases) locally to ensure you have access using whatever details you intend to use.
Next (if needed), if you are trying to access the database on a separate server, ensure you can do likewise in SSMS. So setup SSMS on a computer and ensure you can access the server with the username and password to that database server.
If you don't get the above 2 right, you are simply wasting your time as you cant access the database. This can either be because the user you setup is wrong, doesn't have remote access enabled (if needed), or the ports are not opened (if needed), among many other reasons but these being the most common.
Once you have verified that you can access the database using SSMS. The next step, just for the sake of automating the process and avoiding mistakes, is to let the system do the work for you.
Now go into the web config, and magically, you will see nice clean working connection string there with all the details you need.
{ Below was part of an old post so you can ignore this, I leave it in for reference as its the most basic way to access the database from only code behind. Please scroll down and continue from step 2 below. }
Lets assume the above steps start you off with something like the following as your connection string in the code behind:
string conString = "Data Source=localhost;Initial Catalog=YourDataBaseName;Integrated Security=True;";
This step is very important. Make sure you have the above format of connection string working before taking the following steps. Make sure you actually can access your data using some form of sql command text which displays some data from a table in labels or text boses or whatever, as this is the simplest way to do a connection string.
Once you are sure the above style works its now time to take the next steps:
1. Export your string literal (the stuff in the quotes, including the quotes) to the following section of the web.config file (for multiple connection strings, just do multiple lines:
<configuration>
<connectionStrings>
<add name="conString" connectionString="Data Source=localhost;Initial Catalog=YourDataBaseName;Integrated Security=True;" providerName="System.Data.SqlClient" />
<add name="conString2" connectionString="Data Source=localhost;Initial Catalog=YourDataBaseName;Integrated Security=True;" providerName="System.Data.SqlClient" />
<add name="conString3" connectionString="Data Source=localhost;Initial Catalog=YourDataBaseName;Integrated Security=True;" providerName="System.Data.SqlClient" />
</connectionStrings>
</configuration>
{ The above was part of an old post, after doing the top 3 steps this whole process will be done for you, so you can ignore it. I just leave it here for my own reference. }
2. Now add the following line of code to the C# code behind, prefrably just under the class definition (i.e. not inside a method). This points to the root folder of your project. Essentially it is the project name. This is usually the location of the web.config file (in this case my project is called MyProject.
static Configuration rootWebConfig = WebConfigurationManager.OpenWebConfiguration("/MyProject");
3. Now add the following line of code to the C# code behind. This sets up a string constant to which you can refer in many places throughout your code should you need a conString in different methods.
const string CONSTRINGNAME = "conString";
4. Next add the following line of code to the C# code behind. This gets the connection string from the web.config file with the name conString (from the constant above)
ConnectionStringSettings conString = rootWebConfig.ConnectionStrings.ConnectionStrings[CONSTRINGNAME];
5. Finally, where you origionally would have had something similar to this line of code:
SqlConnection con = new SqlConnection(conString)
you will replace it with this line of code:
SqlConnection con = new SqlConnection(conString.ConnectionString)
After doing these 5 steps your code should work as it did before. Hense the reason you test the constring first in its origional format so you know if it is a problem with the connection string or if it is a problem with the code.
I am new to C#, ASP.Net and Sql Server. So I am sure there must be a better way to do this code. I also would appreicate feedback on how to improve these steps if possible. I have looked all over for something like this but I eventually figured it out after many weeks of hard work. Looking at it myself, I still think, there must be an easier way.
I hope this is helpful.
This is how you can do it-
HTML-
<div style="overflow:hidden; height:100%">
<div style="float:left">a<br>b</div>
<table cellpadding="0" cellspacing="0" style="height:100%;">
<tr><td>This is the content of a table that takes 100% height</td></tr>
</table>
</div>
CSS-
html,body
{
height:100%;
background-color:grey;
}
table
{
background-color:yellow;
}
See the DEMO
Update: Well, if you are not looking for applying 100% height to your parent containers, then here is a jQuery solution that should help you-
Script-
$(document).ready(function(){
var b= $(window).height(); //gets the window's height, change the selector if you are looking for height relative to some other element
$("#tab").css("height",b);
});
One thing to notice is the lack of any "Copyout" within git. That's because you already have a full copy in your local repo - your local repo being a clone
of your chosen upstream repo. So you have effectively a personal checkout
of everything, without putting some 'lock' on those files in the reference repo.
Git provides the SHA1 hash values as the mechanism for verifying that the copy you have of a file / directory tree / commit / repo is exactly the same as that used by whoever is able to declare things as "Master" within the hierarchy of trust. This avoids all those 'locks' that cause most SCM systems to choke (with the usual problems of private copies, big merges, and no real control or management of source code ;-) !
If you prefer splitting a CSV list in SQL, there's a different way to do it using Common Table Expressions (CTEs). See Efficient way to string split using CTE.
Maybe the uuid module?
_var has no meaning and only serves the purpose of making it easier to distinguish that the variable is a private member variable.
In C++, using the _var convention is bad form, because there are rules governing the use of the underscore in front of an identifier. _var is reserved as a global identifier, while _Var (underscore + capital letter) is reserved anytime. This is why in C++, you'll see people using the var_ convention instead.
Add column to your migration file and run this command.
php artisan migrate:refresh --path=/database/migrations/your_file_name.php
function getFileName(path, isExtension){
var fullFileName, fileNameWithoutExtension;
// replace \ to /
while( path.indexOf("\\") !== -1 ){
path = path.replace("\\", "/");
}
fullFileName = path.split("/").pop();
return (isExtension) ? fullFileName : fullFileName.slice( 0, fullFileName.lastIndexOf(".") );
}
OAuth 2.0 spec doesn't define the part. But there could be couple of options:
When resource server gets the token in the Authz Header then it calls the validate/introspect API on Authz server to validate the token. Here Authz server might validate it either from using DB Store or verifying the signature and certain attributes. As part of response, it decodes the token and sends the actual data of token along with remaining expiry time.
Authz Server can encrpt/sign the token using private key and then publickey/cert can be given to Resource Server. When resource server gets the token, it either decrypts/verifies signature to verify the token. Takes the content out and processes the token. It then can either provide access or reject.
In Xcode 5 open the organizer (Window > Organizer) and select "Devices" at the top. Your plugged in device should show up on the left hand side. Drag the IPA file over to that device.
In Xcode 6 and Xcode 7 open Devices (Window > Devices). Again your device should show up in the left hand column. Drag the IPA file to the list of apps underneath "Installed Apps".
For iOS 9 devices, refer to this post on how to get the app running after doing this.
Answering only the first part. What is it?
Inversion of Control (IoC) means to create instances of dependencies first and latter instance of a class (optionally injecting them through constructor), instead of creating an instance of the class first and then the class instance creating instances of dependencies. Thus, inversion of control inverts the flow of control of the program. Instead of the callee controlling the flow of control (while creating dependencies), the caller controls the flow of control of the program.
{ }
-->
defines scope, so if(a==1) { int b = 10; }
says, you are defining int b, for {}- this scope. For
if(a==1)
int b =10;
there is no scope. And you will not be able to use b
anywhere.
Windows has two different settings in which priority is established. There is the metric value which you have already set in the adapter settings, and then there is the connection priority in the network connections settings.
To change the priority of the connections:
You ca also use Response.Write("alert('Error')");
If you wonder to get all values in the same list you can use the following code:
text = [u'sam', [['Test', [['one', [], []]], [(u'file.txt', ['id', 1, 0])]], ['Test2', [], [(u'file2.txt', ['id', 1, 2])]]], []]
def get_values(lVals):
res = []
for val in lVals:
if type(val) not in [list, set, tuple]:
res.append(val)
else:
res.extend(get_values(val))
return res
get_values(text)
I couldn't figure out how to do this in pure MS LINQ, so I wrote my own extension method to do it:
public static bool In<T>(this T objToCheck, params T[] values)
{
if (values == null || values.Length == 0)
{
return false; //early out
}
else
{
foreach (T t in values)
{
if (t.Equals(objToCheck))
return true; //RETURN found!
}
return false; //nothing found
}
}
The best what and easiest way to get nice var_dump is use xDebug (must have for any php dev) Debian way install
In console: apt-get install php-xdebug
after that you should open php.ini (depends on which stack you use) for it's /etc/php/7.0/fpm/php.ini
Search for display_errors
set same -> display_errors = On
Check html_errors
in same file a little bit below, it's also must be On
Save and exit
After open /etc/php/7.0/fpm/conf.d/20-xdebug.ini
And add to the end: ``` xdebug.cli_color=1
``` Save and exit.
A lot other available option and documentation for xdebug can be founded here.
Good luck and Have Fun !!!
If you will be processing all pages in order then simply remembering the last key value seen on the previous page and using TOP (25) ... WHERE Key > @last_key ORDER BY Key
can be the best performing method if suitable indexes exist to allow this to be seeked efficiently - or an API cursor if they don't.
For selecting an arbitary page the best solution for SQL Server 2005 - 2008 R2 is probably ROW_NUMBER
and BETWEEN
For SQL Server 2012+ you can use the enhanced ORDER BY clause for this need.
SELECT *
FROM MyTable
ORDER BY OrderingColumn ASC
OFFSET 50 ROWS
FETCH NEXT 25 ROWS ONLY
Though it remains to be seen how well performing this option will be.
If you want to remove EVERYTHING :
textarea {
border: none;
background-color: transparent;
resize: none;
outline: none;
}
Try this out:
grep -i 'killed process' /var/log/messages
Thank you guys for the help,
When I asked at first I didn't think it's even possible, but after your answers I googled and found this amazing tutorial:
copy will do this. Please check the php-manual. Simple Google search should answer your last two questions ;)
From jquery.com:
The jqXHR.success(), jqXHR.error(), and jqXHR.complete()
callback methods introduced injQuery 1.5 are deprecated
as of jQuery 1.8. To prepare your code for their eventual
removal, use jqXHR.done(), jqXHR.fail(), and jqXHR.always() instead.
If you want global handlers you can use:
.ajaxStart(), .ajaxStop(),
.ajaxComplete(), .ajaxError(),
.ajaxSuccess(), .ajaxSend()
As @Falanwe points out in a comment, doing something like this is incorrect:
int LastCount = mydict.Keys.ElementAt(mydict.Count -1);
You should not depend on the order of keys in a Dictionary. If you need ordering, you should use an OrderedDictionary, as suggested in this answer. The other answers on this page are interesting as well.
Here is another way:
df[[i for i in list(df.columns) if i != '<your column>']]
You just pass all columns to be shown except of the one you do not want.
Found lines that only starts with 6 spaces and finished with:
cat my_file.txt | grep
-e '^ .*(\.c$|\.cpp$|\.h$|\.log$|\.out$)' # .c or .cpp or .h or .log or .out
-e '^ .*[0-9]\{5,9\}$' # numers between 5 and 9 digist
> nolog.txt
Use the MultiValueDict's get
method. This is also present on standard dicts and is a way to fetch a value while providing a default if it does not exist.
is_private = request.POST.get('is_private', False)
Generally,
my_var = dict.get(<key>, <default>)
To elaborate a little more on answer #3 I'd do the following (NOTE: still does not support paste oprations through keyboard or mouse):
$('#txtNumeric').keypress(
function(event) {
//Allow only backspace and delete
if (event.keyCode != 46 && event.keyCode != 8) {
if (!parseInt(String.fromCharCode(event.which))) {
event.preventDefault();
}
}
}
);
Hi you can achieve your result with use of <marquee behavior="alternate"></marquee>
HTML
<div class="wrapper">
<marquee behavior="alternate"><span class="marquee">This is a marquee!</span></marquee>
</div>
CSS
.wrapper{
max-width: 400px;
background: green;
height: 40px;
text-align: right;
}
.marquee {
background: red;
white-space: nowrap;
-webkit-animation: rightThenLeft 4s linear;
}
see the demo:- http://jsfiddle.net/gXdMc/6/
let navHeight = self.navigationController?.navigationBar.frame.height;
let menuBtn = UIButton(type: .custom)
menuBtn.frame = CGRect(x: 0, y: 0, width: 45, height: navHeight!)
menuBtn.setImage(UIImage(named:"image_name")!.withRenderingMode(.alwaysTemplate), for: .normal)
menuBtn.tintColor = .black
Just define your variables in global.js outside a function scope:
// global.js
var global1 = "I'm a global!";
var global2 = "So am I!";
// other js-file
function testGlobal () {
alert(global1);
}
To make sure that this works you have to include/link to global.js before you try to access any variables defined in that file:
<html>
<head>
<!-- Include global.js first -->
<script src="/YOUR_PATH/global.js" type="text/javascript"></script>
<!-- Now we can reference variables, objects, functions etc.
defined in global.js -->
<script src="/YOUR_PATH/otherJsFile.js" type="text/javascript"></script>
</head>
[...]
</html>
You could, of course, link in the script tags just before the closing <body>-tag if you do not want the load of js-files to interrupt the initial page load.
You were setting BCC but then overwriting the variable with the FROM
$to = "[email protected]";
$subject .= "".$emailSubject."";
$headers .= "Bcc: ".$emailList."\r\n";
$headers .= "From: [email protected]\r\n" .
"X-Mailer: php";
$headers .= "MIME-Version: 1.0\r\n";
$headers .= "Content-Type: text/html; charset=ISO-8859-1\r\n";
$message = '<html><body>';
$message .= 'THE MESSAGE FROM THE FORM';
if (mail($to, $subject, $message, $headers)) {
$sent = "Your email was sent!";
} else {
$sent = ("Error sending email.");
}
try backgroundPosition:"(-20px 0)"
Just to double check are you referencing this the background position plugin?
Example of it on jsfiddle with the background position plugin.
There's also the pygame.freetype
module which is more modern, works with more fonts and offers additional functionality.
Create a font object with pygame.freetype.SysFont()
or pygame.freetype.Font
if the font is inside of your game directory.
You can render the text either with the render
method similarly to the old pygame.font.Font.render
or directly onto the target surface with render_to
.
import pygame
import pygame.freetype # Import the freetype module.
pygame.init()
screen = pygame.display.set_mode((800, 600))
GAME_FONT = pygame.freetype.Font("your_font.ttf", 24)
running = True
while running:
for event in pygame.event.get():
if event.type == pygame.QUIT:
running = False
screen.fill((255,255,255))
# You can use `render` and then blit the text surface ...
text_surface, rect = GAME_FONT.render("Hello World!", (0, 0, 0))
screen.blit(text_surface, (40, 250))
# or just `render_to` the target surface.
GAME_FONT.render_to(screen, (40, 350), "Hello World!", (0, 0, 0))
pygame.display.flip()
pygame.quit()
You only need to add your "mingw-install-directory"/bin/ to your Path in your System environment variables ... that's it !!
New syntax (either):
test = df.sort_values(['one'], ascending=[False])
test = df.sort_values(['one'], ascending=[0])
This will be enough to set the file size to 0:
> error.log
All credits to @Martijn Pieters in the comments:
You can use the function last_insert_rowid()
:
The
last_insert_rowid()
function returns theROWID
of the last row insert from the database connection which invoked the function. Thelast_insert_rowid()
SQL function is a wrapper around thesqlite3_last_insert_rowid()
C/C++ interface function.
First of all, you have to create some dynamic memory space. Then you can just strcat the two strings into it. Or you can use the c++ "string" class. The old-school C way:
char* catString = malloc(strlen(one)+strlen(two)+1);
strcpy(catString, one);
strcat(catString, two);
// use the string then delete it when you're done.
free(catString);
New C++ way
std::string three(one);
three += two;
df[['fips', 'row']] = df['row'].str.split(' ', n=1, expand=True)
Heres a another take on this problem, using recursion and without using mutable variables. Also, im not using setInterval
so theres no cleanup that has to be done.
Having this HTML
<section id="testimonials">
<h2>My testimonial spinner</h2>
<div class="testimonial">
<p>First content</p>
</div>
<div class="testimonial">
<p>Second content</p>
</div>
<div class="testimonial">
<p>Third content</p>
</div>
</section>
Using ES2016
Here you call the function recursively and update the arguments.
const testimonials = $('#testimonials')
.children()
.filter('div.testimonial');
const showTestimonial = index => {
testimonials.hide();
$(testimonials[index]).fadeIn();
return index === testimonials.length
? showTestimonial(0)
: setTimeout(() => { showTestimonial(index + 1); }, 10000);
}
showTestimonial(0); // id of the first element you want to show.
First of all, why is the map a HashMap<String, ArrayList<String>>
and not a HashMap<String, List<String>>
? Is there some reason why the value must be a specific implementation of interface List
(ArrayList
in this case)?
Arrays.asList
does not return a java.util.ArrayList
, so you can't assign the return value of Arrays.asList
to a variable of type ArrayList
.
Instead of:
allWords = Arrays.asList(strTemp.toLowerCase().split("\\s+"));
Try this:
allWords.addAll(Arrays.asList(strTemp.toLowerCase().split("\\s+")));
$myVar = $someVar ?? 42;
Is equivalent to :
$myVar = isset($someVar) ? $someVar : 42;
For constants, the behaviour is the same when using a constant that already exists :
define("FOO", "bar");
define("BAR", null);
$MyVar = FOO ?? "42";
$MyVar2 = BAR ?? "42";
echo $MyVar . PHP_EOL; // bar
echo $MyVar2 . PHP_EOL; // 42
However, for constants that don't exist, this is different :
$MyVar3 = IDONTEXIST ?? "42"; // Raises a warning
echo $MyVar3 . PHP_EOL; // IDONTEXIST
Warning: Use of undefined constant IDONTEXIST - assumed 'IDONTEXIST' (this will throw an Error in a future version of PHP)
Php will convert the non-existing constant to a string.
You can use constant("ConstantName")
that returns the value of the constant or null if the constant doesn't exist, but it will still raise a warning. You can prepended the function with the error control operator @
to ignore the warning message :
$myVar = @constant("IDONTEXIST") ?? "42"; // No warning displayed anymore
echo $myVar . PHP_EOL; // 42
You need to make your regular expression non-greedy, because by default, "(.*)"
will match all of "file path/level1/level2" xxx some="xxx"
.
Instead you can make your dot-star non-greedy, which will make it match as few characters as possible:
/location="(.*?)"/
Adding a ?
on a quantifier (?
, *
or +
) makes it non-greedy.
In my case it works like this:
...
<properties>
<main_dir>${project.parent.relativePath}/..</main_dir>
</properties>
...
<plugin>
<groupId>org.codehaus.mojo</groupId>
<artifactId>properties-maven-plugin</artifactId>
<version>1.0-alpha-1</version>
<executions>
<execution>
<phase>initialize</phase>
<goals>
<goal>read-project-properties</goal>
</goals>
<configuration>
<files>
<file>${main_dir}/maven_custom.properties</file>
</files>
</configuration>
</execution>
</executions>
</plugin>
Set the min SDK version in your project's AndroidManifest.xml file and in the toolbar search for "Sync Projects with Gradle Files" icon. It works for me.
Also look for your project's build.gradle file and update the min sdk version.
I use this simple, clean and effective method.
I place arguments in an array, 1 per line. This way it is very easy to read and edit. Then I use a simple trick of passing all arguments inside double quotes to a function with 1 single parameter. That flattens them, including arrays, to a single string, which I then execute using PS's 'Invoke-Expression'. This directive is specifically designed to convert a string to runnable command. Works well:
# function with one argument will flatten
# all passed-in entries into 1 single string line
Function Execute($command) {
# execute:
Invoke-Expression $command;
# if you have trouble try:
# Invoke-Expression "& $command";
# or if you need also output to a variable
# Invoke-Expression $command | Tee-Object -Variable cmdOutput;
}
# ... your main code here ...
# The name of your executable app
$app = 'my_app.exe';
# List of arguments:
# Notice the type of quotes - important !
# Those in single quotes are normal strings, like 'Peter'
$args = 'arg1',
'arg2',
$some_variable,
'arg4',
"arg5='with quotes'",
'arg6',
"arg7 \ with \ $other_variable",
'etc...';
# pass all arguments inside double quotes
Execute "$app $args";
My first try, in Python. O(2n):
def product(l):
product = 1
num_zeroes = 0
pos_zero = -1
# Multiply all and set positions
for i, x in enumerate(l):
if x != 0:
product *= x
l[i] = 1.0/x
else:
num_zeroes += 1
pos_zero = i
# Warning! Zeroes ahead!
if num_zeroes > 0:
l = [0] * len(l)
if num_zeroes == 1:
l[pos_zero] = product
else:
# Now set the definitive elements
for i in range(len(l)):
l[i] = int(l[i] * product)
return l
if __name__ == "__main__":
print("[0, 0, 4] = " + str(product([0, 0, 4])))
print("[3, 0, 4] = " + str(product([3, 0, 4])))
print("[1, 2, 3] = " + str(product([1, 2, 3])))
print("[2, 3, 4, 5, 6] = " + str(product([2, 3, 4, 5, 6])))
print("[2, 1, 2, 2, 3] = " + str(product([2, 1, 2, 2, 3])))
Output:
[0, 0, 4] = [0, 0, 0]
[3, 0, 4] = [0, 12, 0]
[1, 2, 3] = [6, 3, 2]
[2, 3, 4, 5, 6] = [360, 240, 180, 144, 120]
[2, 1, 2, 2, 3] = [12, 24, 12, 12, 8]
Here is complete code with example:
<?php
function is_domain($url)
{
$parse = parse_url($url);
if (isset($parse['host'])) {
$domain = $parse['host'];
} else {
$domain = $url;
}
return preg_match('/^(?!\-)(?:[a-zA-Z\d\-]{0,62}[a-zA-Z\d]\.){1,126}(?!\d+)[a-zA-Z\d]{1,63}$/', $domain);
}
echo is_domain('example.com'); //true
echo is_domain('https://example.com'); //true
echo is_domain('https://.example.com'); //false
echo is_domain('https://localhost'); //false
You need to enclose that in <%! %> as follows:
<%!
public String getQuarter(int i){
String quarter;
switch(i){
case 1: quarter = "Winter";
break;
case 2: quarter = "Spring";
break;
case 3: quarter = "Summer I";
break;
case 4: quarter = "Summer II";
break;
case 5: quarter = "Fall";
break;
default: quarter = "ERROR";
}
return quarter;
}
%>
You can then invoke the function within scriptlets or expressions:
<%
out.print(getQuarter(4));
%>
or
<%= getQuarter(17) %>
If you already have a config.json file then the final file should look something like this...
Here registry.myprivate.com
is the one which was giving me problems.
{
"auths": {
"https://index.docker.io/v1/": {
"auth": "xxxxxxxxxxxxxxxxxxxx=="
},
"registry.myprivate.com": {
"auth": "xxxxxxxxxxxxxxxxxxxx="
}
},
"HttpHeaders": {
"User-Agent": "Docker-Client/19.03.8 (linux)"
},
"insecure-registries" : ["registry.myprivate.com"]
}
To insert a sleep command you can use Thread.sleep(2000). So the code would be:
List<Integer> myCoords = new ArrayList<Integer>();
myCoords.add(10);
myCoords.add(20);
myCoords.add(30);
myCoords.add(40);
myCoords.add(50);
Iterator<Integer> myListIterator = someList.iterator();
while (myListIterator.hasNext()) {
Integer coord = myListIterator.next();
System.out.println(coord);
Thread.Sleep(2000);
}
This would output: 10 20 30 40 50
If you want the numbers after each other you could use: System.out.print(coord +" " ); and if you want to repeat the section you can put it in another while loop.
List<Integer> myCoords = new ArrayList<Integer>();
myCoords.add(10);
myCoords.add(20);
myCoords.add(30);
myCoords.add(40);
myCoords.add(50);
while(true)
Iterator<Integer> myListIterator = someList.iterator();
while (myListIterator.hasNext()) {
Integer coord = myListIterator.next();
System.out.print(coord + " ");
Thread.Sleep(2000);
}
}
This would output: 10 20 30 40 50 10 20 30 40 50 ... and never stop until you kill the program.
Edit: You do have to put the sleep command in a try catch block
Fail module works great! Thanks.
I had to define my fact before checking it, otherwise I'd get an undefined variable error.
And I had issues when doing setting the fact with quotes and without spaces.
This worked:
set_fact: flag="failed"
This threw errors:
set_fact: flag = failed
Simple to do it in XAML, and surprised that nobody posted this answer yet. In the following example, the Window
is defined in a ResourceLibrary
(notice the x:Key
), but you can also use this XAML binding on a standalone Page
-style WPF resource.
<Window x:Key="other_window"
Topmost="{Binding Source={x:Static Application.Current},Path=MainWindow.IsActive,Mode=OneWay}">
<TextBlock Text="OTHER WINDOW" />
</Window>
var objDiv = document.getElementById("divExample");
objDiv.scrollTop = objDiv.scrollHeight;
Here is a working example: http://jsfiddle.net/rVBzt/ (using jQuery)
<img id="tiger" src="https://twimg0-a.akamaihd.net/profile_images/2642324404/46d743534606515238a9a12cfb4b264a.jpeg">
<a id="toggle">click to toggle</a>
img {display: none;}
a {cursor: pointer; color: blue;}
$('#toggle').click(function() {
$('#tiger').toggle();
});
If you want the powershell errormessage for a cmdlet suppressed, but still want to catch the error, use "-erroraction 'silentlyStop'"
Use count()
:
sc=scorm.objects.filter(Header__id=qp.id)
if sc.count() > 0:
...
The advantage over e.g. len()
is, that the QuerySet is not yet evaluated:
count()
performs aSELECT COUNT(*)
behind the scenes, so you should always usecount()
rather than loading all of the record into Python objects and callinglen()
on the result.
Having this in mind, When QuerySets are evaluated can be worth reading.
If you use get()
, e.g. scorm.objects.get(pk=someid)
, and the object does not exists, an ObjectDoesNotExist
exception is raised:
from django.core.exceptions import ObjectDoesNotExist
try:
sc = scorm.objects.get(pk=someid)
except ObjectDoesNotExist:
print ...
Update:
it's also possible to use exists()
:
if scorm.objects.filter(Header__id=qp.id).exists():
....
Returns
True
if the QuerySet contains any results, andFalse
if not. This tries to perform the query in the simplest and fastest way possible, but it does execute nearly the same query as a normal QuerySet query.
Just an idea. I like to find an easy way out and try re use already available resources. if I were to sort files I would've just create a process and make syscal to "DIR [x:\Folders\SubFolders*.*] /s /b /on" and capture the output.
With system's DIR command you can sort by :
/O List by files in sorted order.
sortorder N By name (alphabetic) S By size (smallest first)
E By extension (alphabetic) D By date/time (oldest first)
G Group directories first - Prefix to reverse order
The /S switch includes sub folders
I AM NOT SURE IF D = By Date/Time is using LastModifiedDate or FileCreateDate. But if the needed sort order is already built-in in the DIR command, I will get that by calling syscall. And it's FAST. I am just the lazy guy ;)
After a little googling I found switch to sort by particular date/time:-
/t [[:]TimeField] : Specifies which time field to display or use for sorting. The following list describes each of the values you can use for TimeField.
Value Description
c : Creation
a : Last access
w : Last written
A ListView is a specialized ListBox (that is, it inherits from ListBox). It allows you to specify different views rather than a straight list. You can either roll your own view, or use GridView (think explorer-like "details view"). It's basically the multi-column listbox, the cousin of windows form's listview.
If you don't need the additional capabilities of ListView, you can certainly use ListBox if you're simply showing a list of items (Even if the template is complex).
textView.setGravity(Gravity.CENTER | Gravity.BOTTOM);
This will set gravity of your textview.
Maybe using Where() before First() can help you, as my problem has been solved in this case.
var documentRow = _dsACL.Documents.Where(o => o.ID == id).FirstOrDefault();
An alternative solution is using an external table: http://www.orafaq.com/node/848
Use this when you have to do this import very often and very fast.
SOLVED:
Because I had installed the Oracle Java 7 it had changed the default Java to Oracle Java 7, however it needed to be the Open JDK.
To fix, open up terminal and type
sudo update-alternatives --config java
This brings up a list of the different types of Java. Simply select the Open JDK.
A bit late for this, but this thread comes up in Google as a top result when searching for an overlay method.
You could simply use a background-blend-mode
.foo {
background-image: url(images/image1.png), url(images/image2.png);
background-color: violet;
background-blend-mode: screen multiply;
}
What this does is it takes the second image, and it blends it with the background colour by using the multiply blend mode, and then it blends the first image with the second image and the background colour by using the screen blend mode. There are 16 different blend modes that you could use to achieve any overlay.
multiply, screen, overlay, darken, lighten, color-dodge, color-burn, hard-light, soft-light, difference, exclusion, hue, saturation, color and luminosity.
On Linux run: whereis gradle
.
For me it was /usr/lib/gradle/1.10
.
Beginning PowerShell 5.0 New-Item
, Remove-Item
, and Get-ChildItem
have been enhanced to support creating and managing symbolic links. The ItemType parameter for New-Item
accepts a new value, SymbolicLink. Now you can create symbolic links in a single line by running the New-Item cmdlet.
New-Item -ItemType SymbolicLink -Path "C:\temp" -Name "calc.lnk" -Value "c:\windows\system32\calc.exe"
Be Carefull a SymbolicLink is different from a Shortcut, shortcuts are just a file. They have a size (A small one, that just references where they point) and they require an application to support that filetype in order to be used. A symbolic link is filesystem level, and everything sees it as the original file. An application needs no special support to use a symbolic link.
Anyway if you want to create a Run As Administrator shortcut using Powershell you can use
$file="c:\temp\calc.lnk"
$bytes = [System.IO.File]::ReadAllBytes($file)
$bytes[0x15] = $bytes[0x15] -bor 0x20 #set byte 21 (0x15) bit 6 (0x20) ON (Use –bor to set RunAsAdministrator option and –bxor to unset)
[System.IO.File]::WriteAllBytes($file, $bytes)
If anybody want to change something else in a .LNK file you can refer to official Microsoft documentation.