Interrupts are hardware interrupts, while traps are software-invoked interrupts. Occurrences of hardware interrupts usually disable other hardware interrupts, but this is not true for traps. If you need to disallow hardware interrupts until a trap is served, you need to explicitly clear the interrupt flag. And usually the interrupt flag on the computer affects (hardware) interrupts as opposed to traps. This means that clearing this flag will not prevent traps. Unlike traps, interrupts should preserve the previous state of the CPU.
close you project then open xcode go to file -> open search your project and open it . this worked for me
if you did change the httpd.conf file located under conf_files folder, don't use windows notepad, you need a unix text editor, try TED pad, after making any changes to your httpd.conf file save it. ps: if you use a dos/windows editor you will end up with an "Error in Apache file changed" message. so do be careful.... Salam
In the .css try
.jumbotron {_x000D_
background-color:red !important; _x000D_
}
_x000D_
You can unload a ClassLoader but you cannot unload specific classes. More specifically you cannot unload classes created in a ClassLoader that's not under your control.
If possible, I suggest using your own ClassLoader so you can unload.
I faced this same issue on CentOS 7 years later
Posting hoping that it may help others...
Steps:
FIRST, configure the php-fpm settings:
-> systemctl stop php-fpm.service
-> cd /etc/php-fpm.d
-> ls -hal
(should see a www.conf file)
-> cp www.conf www.conf.backup
(back file up just in case)
-> vi www.conf
-> :/listen =
(to get to the line we need to change)
-> i
(to enter VI's text insertion mode)
-> change from listen = 127.0.0.1:9000
TO listen = /var/run/php-fpm/php-fpm.sock
-> Esc
then :/listen.owner
(to find it) then i
(to change)
-> UNCOMMENT the listen.owner = nobody
AND listen.group = nobody
lines
-> Hit Esc
then type :/user =
then i
-> change user = apache
TO user = nginx
-> AND change group = apache
TO group = nginx
-> Hit Esc
then :wq
(to save and quit)
-> systemctl start php-fpm.service
(now you will have a php-fpm.sock file)
SECOND, you configure your server {}
block in your /etc/nginx/nginx.conf
file. Then run:systemctl restart nginx.service
FINALLY, create a new .php file in your /usr/share/nginx/html directory for your Nginx server to serve up via the internet browser as a test.
-> vi /usr/share/nginx/html/mytest.php
-> type o
-> <?php echo date("Y/m/d-l"); ?>
(PHP page will print date and day in browser)
-> Hit Esc
-> type :wq
(to save and quite VI editor)
-> open up a browser and go to: http://yourDomainOrIPAddress/mytest.php
(you should see the date and day printed)
Handles either type of line break
str.replace(new RegExp('\r?\n','g'), '<br />');
You can simply kill docker cli process by sending SEGKILL. If you started the container with
docker run -it some/container
You can get it's pid
ps -aux | grep docker
user 1234 0.3 0.6 1357948 54684 pts/2 Sl+ 15:09 0:00 docker run -it some/container
let's say it's 1234, you can "detach" it with
kill -9 1234
It's somewhat of a hack but it works!
If you could get the data as a generic tuple when you read it in or retrieved it, it would be a lot easier; then you would just have to write a Sort function that compares the desired column of the tuple, and you have a single dimension array of tuples.
I got here with an MS Access problem.
Backticks are good for MySQL, but they create weird errors, like "Invalid Query Name: Query1" in MS Access, for MS Access only, use square brackets:
It should look like this
SELECT Customer.[Customer ID], Customer.[Full Name] ...
The necessary variable is inventory_hostname
.
- name: Install this only for local dev machine
pip: name=pyramid
when: inventory_hostname == "local"
It is somewhat hidden in the documentation at the bottom of this section.
I encountered this error after editing a web part (.aspx) page in SharePoint Designer 2013. When I looked at the code in SPD, an H1 element near the top of the page was highlighted yellow. Hovering over that indicated that SharePoint:AjaxDelta was not closed before the H1. Adding the </SharePoint:AjaxDelta>
fixed it.
Weird because it appeared SPD introduced the error after I was working on listview web parts or a page viewer web part elsewhere on the page.
You need to change your code to find the row relative to the button which was clicked. Try this:
$(".use-address").click(function() {
var id = $(this).closest("tr").find(".nr").text();
$("#resultas").append(id);
});
I believe this is an old question, and the Traffic was introduced by Github in 2014. Here is the link to the description of Traffic, that tells you the views on your repositories.
My problem was caused by OneDrive. OneDrive was syncing the folder my batch file lived in, and that seems to prevent Task Scheduler from executing it. (Doesn't anyone at MS test this kind of thing?)
Anyway by moving my batch file to a folder that wasn't in OneDrive the batch file could be started by Task Scheduler.
req.session.destroy();
The above did not work for me so I did this.
req.session.cookie.expires = new Date().getTime();
By setting the expiration of the cookie to the current time, the session expired on its own.
I had a very similar problem with a console program I develop under VS2010 (upgraded from VS2008 under XP) My prog uses EnLib to do some logging. The error was fired because EntLib had not the permission to register a new event source.
So I started once my compiled prog as an Administrator : it registered the event source. Then I went back developping and debugging from inside VS without problem.
(you may also refer to http://www.blackwasp.co.uk/EventLog_3.aspx, it helped me
You will need to use any javascript html calendar widget.
try this calendar view widget, just copy-paste some code shown in example there and thats it what you want.
Here is the link to Jquery Mobile date box - JQM datebox
If you have the input stream (see Joe's answer) also consider ioutils.toString( inputstream ).
http://commons.apache.org/io/api-1.4/org/apache/commons/io/IOUtils.html#toString(java.io.InputStream)
There is a documentation in SLf4J site to resolve this. I followed that and added slf4j-simple-1.6.1.jar to my aplication along with slf4j-api-1.6.1.jar which i already had.This solved my problem
Try BeanComparator from Apache Commons.
import org.apache.commons.beanutils.BeanComparator;
BeanComparator fieldComparator = new BeanComparator("fruitName");
Collections.sort(fruits, fieldComparator);
My recommendation is to solve problems that you're interested in, writing code that might be useful to you.
Java is a huge box. It's got a lot of computer science inside: graphics, scientific computing, relational databases, user interfaces for desktop and web, messaging and queuing, multi-threading, security, and more. Each area has their own "beginner problem". Which one do you mean?
How do you define "beginner problem"? Maybe you're having trouble because you aren't narrowing your search enough.
If your imagination is lacking, your best bet is to Google something like "java beginner practice problems" and investigate what you get back.
Or start with Sun's on-line Java tutorial and work you way all the way through it. You'll know a fair amount about Java when you're done.
'self' is only a reference to the object. 'del self' is deleting the 'self' reference from the local namespace of the kill function, instead of the actual object.
To see this for yourself, look at what happens when these two functions are executed:
>>> class A():
... def kill_a(self):
... print self
... del self
... def kill_b(self):
... del self
... print self
...
>>> a = A()
>>> b = A()
>>> a.kill_a()
<__main__.A instance at 0xb771250c>
>>> b.kill_b()
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "<stdin>", line 7, in kill_b
UnboundLocalError: local variable 'self' referenced before assignment
For changing the language of the file browser:
As an alternate to what ZimSystem mentioned (override the CSS), a more elegant solution is suggested by the bootstrap docs: build your custom bootstrap styles by adding languages in SCSS
Read about it here: https://getbootstrap.com/docs/4.0/components/forms/#file-browser
Note: you need to have the lang attribute properly set in your document for this to work
For updating the value on file selection:
You could do it with inline js like this:
<label class="custom-file">
<input type="file" id="myfile" class="custom-file-input" onchange="$(this).next().after().text($(this).val().split('\\').slice(-1)[0])">
<span class="custom-file-control"></span>
</label>
Note: the .split('\\').slice(-1)[0]
part removes the C:\fakepath\ prefix
Solution in ES6/TypeScript:
let d = new Date;
console.log(d, [`${d.getFullYear()}`, `0${d.getMonth()}`.substr(-2), `0${d.getDate()}`.substr(-2)].join("-"));
I also stuck on this issue. But I solved simply by defining the foreign key as unsigned integer
.
Find the below example-
CREATE TABLE parent (
id int(10) UNSIGNED NOT NULL,
PRIMARY KEY (id)
) ENGINE=INNODB;
CREATE TABLE child (
id int(10) UNSIGNED NOT NULL,
parent_id int(10) UNSIGNED DEFAULT NULL,
FOREIGN KEY (parent_id) REFERENCES parent(id) ON DELETE CASCADE
) ENGINE=INNODB;
This example uses memoization, basically storing values in a table (dictionary in this case) so you can look them up later instead of recalculating them.
Here we use a simple class with a __call__
method to calculate factorials (through a callable object) instead of a factorial function that contains a static variable (as that's not possible in Python).
class Factorial:
def __init__(self):
self.cache = {}
def __call__(self, n):
if n not in self.cache:
if n == 0:
self.cache[n] = 1
else:
self.cache[n] = n * self.__call__(n-1)
return self.cache[n]
fact = Factorial()
Now you have a fact
object which is callable, just like every other function. For example
for i in xrange(10):
print("{}! = {}".format(i, fact(i)))
# output
0! = 1
1! = 1
2! = 2
3! = 6
4! = 24
5! = 120
6! = 720
7! = 5040
8! = 40320
9! = 362880
And it is also stateful.
This is solution without jquery.
Add Calendar and TextBox in WebForm -> Source of WebForm has this:
<asp:Calendar ID="Calendar1" runat="server" OnSelectionChanged="DateChange">
</asp:Calendar>
<asp:TextBox ID="TextBox1" runat="server"></asp:TextBox>
Create methods in cs file of WebForm:
protected void Page_Load(object sender, EventArgs e)
{
TextBox1.Text = DateTime.Today.ToShortDateString()+'.';
}
protected void DateChange(object sender, EventArgs e)
{
TextBox1.Text = Calendar1.SelectedDate.ToShortDateString() + '.';
}
Method DateChange is connected with Calendar event SelectionChanged. It looks like this: DatePicker Image
Instead of handcranking your models try using something like the Json2csharp.com website. Paste In an example JSON response, the fuller the better and then pull in the resultant generated classes. This, at least, takes away some moving parts, will get you the shape of the JSON in csharp giving the serialiser an easier time and you shouldnt have to add attributes.
Just get it working and then make amendments to your class names, to conform to your naming conventions, and add in attributes later.
EDIT: Ok after a little messing around I have successfully deserialised the result into a List of Job (I used Json2csharp.com to create the class for me)
public class Job
{
public string id { get; set; }
public string position_title { get; set; }
public string organization_name { get; set; }
public string rate_interval_code { get; set; }
public int minimum { get; set; }
public int maximum { get; set; }
public string start_date { get; set; }
public string end_date { get; set; }
public List<string> locations { get; set; }
public string url { get; set; }
}
And an edit to your code:
List<Job> model = null;
var client = new HttpClient();
var task = client.GetAsync("http://api.usa.gov/jobs/search.json?query=nursing+jobs")
.ContinueWith((taskwithresponse) =>
{
var response = taskwithresponse.Result;
var jsonString = response.Content.ReadAsStringAsync();
jsonString.Wait();
model = JsonConvert.DeserializeObject<List<Job>>(jsonString.Result);
});
task.Wait();
This means you can get rid of your containing object. Its worth noting that this isn't a Task related issue but rather a deserialisation issue.
EDIT 2:
There is a way to take a JSON object and generate classes in Visual Studio. Simply copy the JSON of choice and then Edit> Paste Special > Paste JSON as Classes. A whole page is devoted to this here:
http://blog.codeinside.eu/2014/09/08/Visual-Studio-2013-Paste-Special-JSON-And-Xml/
You can do it in a single line
var res = listA.Where(n => !listB.Contains(n));
This is not the fastest way to do it: in case listB
is relatively long, this should be faster:
var setB = new HashSet(listB);
var res = listA.Where(n => !setB.Contains(n));
Here are my solutions. Their advantages are : easy-understanding code, works for all characters. Enjoy.
Solution 1 :
public static void main(String[] args) {
String str = "CC%";
String result = "";
char[] messChar = str.toCharArray();
for (int i = 0; i < messChar.length; i++) {
result += Integer.toBinaryString(messChar[i]) + " ";
}
System.out.println(result);
}
prints :
1000011 1000011 100101
Solution 2 :
Possibility to choose the number of displayed bits per char.
public static String toBinary(String str, int bits) {
String result = "";
String tmpStr;
int tmpInt;
char[] messChar = str.toCharArray();
for (int i = 0; i < messChar.length; i++) {
tmpStr = Integer.toBinaryString(messChar[i]);
tmpInt = tmpStr.length();
if(tmpInt != bits) {
tmpInt = bits - tmpInt;
if (tmpInt == bits) {
result += tmpStr;
} else if (tmpInt > 0) {
for (int j = 0; j < tmpInt; j++) {
result += "0";
}
result += tmpStr;
} else {
System.err.println("argument 'bits' is too small");
}
} else {
result += tmpStr;
}
result += " "; // separator
}
return result;
}
public static void main(String args[]) {
System.out.println(toBinary("CC%", 8));
}
prints :
01000011 01000011 00100101
Visual representation of the 3-item recursive solution: http://www.docdroid.net/ea0s/generatepermutations.pdf.html
Breakdown:
Here's how I successfully upgraded from v0.8.18
to v0.10.20
without any other requirements like brew etc, (type these commands in the terminal):
sudo npm cache clean -f
(force) clear you npm cachesudo npm install -g n
install n (this might take a while)sudo n stable
upgrade to the current stable versionNote that sudo
might prompt your password.
Additional note regarding step 3: stable
can be exchanged for latest
, lts
(long term support) or any specific version number such as 0.10.20
.
If the version number doesn't show up when typing node -v
, you might have to reboot.
These instructions are found here as well: davidwalsh.name/upgrade-nodejs
More info about the n package found here: npmjs.com/package/n
More info about Node.js' release schedule: github.com/nodejs/Release
Try to update your compiler, I'm using GCC 4.7 on Windows 7 Starter x86 with MinGW and it compiles fine with the same options both in C99 and C11.
Unfortunately, vars files do not have include statements.
You can either put all the vars into the definitions
dictionary, or add the variables as another dictionary in the same file.
If you don't want to have them in the same file, you can include them at the playbook level by adding the vars file at the start of the play:
---
- hosts: myhosts
vars_files:
- default_step.yml
or in a task:
---
- hosts: myhosts
tasks:
- name: include default step variables
include_vars: default_step.yml
You can do this with the hex codec. ie:
>>> s='000000000000484240FA063DE5D0B744ADBED63A81FAEA390000C8428640A43D5005BD44'
>>> s.decode('hex')
'\x00\x00\x00\x00\x00\x00HB@\xfa\x06=\xe5\xd0\xb7D\xad\xbe\xd6:\x81\xfa\xea9\x00\x00\xc8B\x86@\xa4=P\x05\xbdD'
Just to add to the answers, App Server Apache Geronimo 3.0 uses Tomcat 7 as the web server, and in that environment the file server.xml is located at
<%GERONIMO_HOME%>/var/catalina/server.xml
.
The configuration does take effect even when the Geronimo Console at Application Server->WebServer->TomcatWebConnector->maxPostSize
still displays 2097152 (the default value)
I have face this issue in post request. I have changed like this in axios header. It works fine.
axios.post('http://localhost/M-Experience/resources/GETrends.php',
{
firstName: this.name
},
{
headers: { 'Content-Type': 'application/x-www-form-urlencoded' }
});
This will help you.
debugger;
var today = new Date();
document.getElementById('date').innerHTML = today
First, you declared $db outside the function. If you want to use it inside the function, you should put this at the begining of your function code:
global $db;
And I guess, when you wrote:
if($result->num_rows){
return (mysqli_result($query, 0) == 1) ? true : false;
what you really wanted was:
if ($result->num_rows==1) { return true; } else { return false; }
Here you will find a better solution OLTP vs. OLAP
OLTP (On-line Transaction Processing) is involved in the operation of a particular system. OLTP is characterized by a large number of short on-line transactions (INSERT, UPDATE, DELETE). The main emphasis for OLTP systems is put on very fast query processing, maintaining data integrity in multi-access environments and an effectiveness measured by number of transactions per second. In OLTP database there is detailed and current data, and schema used to store transactional databases is the entity model (usually 3NF). It involves Queries accessing individual record like Update your Email in Company database.
OLAP (On-line Analytical Processing) deals with Historical Data or Archival Data. OLAP is characterized by relatively low volume of transactions. Queries are often very complex and involve aggregations. For OLAP systems a response time is an effectiveness measure. OLAP applications are widely used by Data Mining techniques. In OLAP database there is aggregated, historical data, stored in multi-dimensional schemas (usually star schema). Sometime query need to access large amount of data in Management records like what was the profit of your company in last year.
Might be useful to some : check for
pointer-events: none;
In the CSS. It prevents clicks from being caught by JS. I think it's relevant because the CSS might be the last place you'd look into in this kind of situation.
I think this regex pattern handle precisely what you want
/(http|https|ftp|ftps)\:\/\/[a-zA-Z0-9\-\.]+\.[a-zA-Z]{2,3}(\/\S*)?/
and this is an snippet example to extract Urls:
// The Regular Expression filter
$reg_exUrl = "/(http|https|ftp|ftps)\:\/\/[a-zA-Z0-9\-\.]+\.[a-zA-Z]{2,3}(\/\S*)?/";
// The Text you want to filter for urls
$text = "The text you want https://stackoverflow.com/questions/6038061/regular-expression-to-find-urls-within-a-string to filter goes here.";
// Check if there is a url in the text
preg_match_all($reg_exUrl, $text, $url,$matches);
var_dump($matches);
t
refers to the text mode. There is no difference between r
and rt
or w
and wt
since text mode is the default.
Documented here:
Character Meaning
'r' open for reading (default)
'w' open for writing, truncating the file first
'x' open for exclusive creation, failing if the file already exists
'a' open for writing, appending to the end of the file if it exists
'b' binary mode
't' text mode (default)
'+' open a disk file for updating (reading and writing)
'U' universal newlines mode (deprecated)
The default mode is 'r'
(open for reading text, synonym of 'rt'
).
Just add public properties to the user control.
You can add [Category("MyCategory")]
and [Description("A property that controls the wossname")]
attributes to make it nicer, but as long as it's a public property it should show up in the property panel.
The way I would do it is to leave the __ init__.py files empty, and do:
import lib.mod1.mod11
lib.mod1.mod11.mod12()
or
from lib.mod1.mod11 import mod12
mod12()
You may find that the mod1 dir is unnecessary, just have mod12.py in lib.
No you don't need to call the base destructor, a base destructor is always called for you by the derived destructor. Please see my related answer here for order of destruction.
To understand why you want a virtual destructor in the base class, please see the code below:
class B
{
public:
virtual ~B()
{
cout<<"B destructor"<<endl;
}
};
class D : public B
{
public:
virtual ~D()
{
cout<<"D destructor"<<endl;
}
};
When you do:
B *pD = new D();
delete pD;
Then if you did not have a virtual destructor in B, only ~B() would be called. But since you have a virtual destructor, first ~D() will be called, then ~B().
In SQL, the way to do this is to double the apostrophe:
'he doesn''t work for me'
If you are doing this programmatically, you should use an API that accepts parameters and escapes them for you, like prepared statements or similar, rather that escaping and using string concatenation to assemble a query.
You can use List as a classifier for many fields, but you need wrap null values into Optional:
Function<String, List> classifier = (item) -> List.of(
item.getFieldA(),
item.getFieldB(),
Optional.ofNullable(item.getFieldC())
);
Map<List, List<Item>> grouped = items.stream()
.collect(Collectors.groupingBy(classifier));
gvim version: 8.2
location of .gvimrc: %userprofile%/.gvimrc
" .gvimrc
colorscheme darkblue
Which color is allows me to choose?
Find your install directory and go to the directory of colors
.
in my case is:
%PROGRAMFILES(X86)%\Vim\vim82\colors
blue.vim
darkblue.vim
slate.vim
...
README.txt
I had this identical problem, I was using django-rest-knox for authentication tokens. It turns out that nothing was wrong with my fetch method which looked like this:
...
let headers = {"Content-Type": "application/json"};
if (token) {
headers["Authorization"] = `Token ${token}`;
}
return fetch("/api/instruments/", {headers,})
.then(res => {
...
I was running apache.
What solved this problem for me was changing WSGIPassAuthorization
to 'On'
in wsgi.conf
.
I had a Django app deployed on AWS EC2, and I used Elastic Beanstalk to manage my application, so in the django.config
, I did this:
container_commands:
01wsgipass:
command: 'echo "WSGIPassAuthorization On" >> ../wsgi.conf'
I am not sure if I understood the notion of addresses (I am assuming houseAddress here), but if you are looking for way a to print the ArrayList, here you go:
System.out.println(houseAddress.toString().replaceAll("\\[\\]", ""));
You just need a binary (with debugging symbols included) that is identical to the one that generated the core dump file. Then you can run gdb path/to/the/binary path/to/the/core/dump/file
to debug it.
When it starts up, you can use bt
(for backtrace) to get a stack trace from the time of the crash. In the backtrace, each function invocation is given a number. You can use frame number
(replacing number with the corresponding number in the stack trace) to select a particular stack frame.
You can then use list
to see code around that function, and info locals
to see the local variables. You can also use print name_of_variable
(replacing "name_of_variable" with a variable name) to see its value.
Typing help
within GDB will give you a prompt that will let you see additional commands.
you have to iterate gridview Rows
for (int count = 0; count < grd.Rows.Count; count++)
{
if (((CheckBox)grd.Rows[count].FindControl("yourCheckboxID")).Checked)
{
((Label)grd.Rows[count].FindControl("labelID")).Text
}
}
today is 2020-12-25, my VSC is 1.52.1, tried all above not very successful. Here is complete steps I did to add my existing local project to GitHub using VSC (Note: Do not create a corresponding repository at GitHub):
<your username>/<your new repository name>
. For example, my username is "myname" and my local folder is named "HelloWorld". So, it will be myname/HelloWorld
in the type-in box.You can type sudo install (name of script) /usr/local/bin/(what you want to type to execute said script)
ex: sudo install quickcommit.sh /usr/local/bin/quickcommit
enter password
now can run without .sh and in any directory
<customErrors defaultRedirect="~/404.aspx" mode="On">
<error statusCode="404" redirect="~/404.aspx"/>
</customErrors>
Code above is only for "Page Not Found Error-404" if file extension is known(.html,.aspx etc)
Beside it you also have set Customer Errors for extension not known or not correct as
.aspwx
or .vivaldo
. You have to add httperrors
settings in web.config
<httpErrors errorMode="Custom">
<error statusCode="404" prefixLanguageFilePath="" path="/404.aspx" responseMode="Redirect" />
</httpErrors>
<modules runAllManagedModulesForAllRequests="true"/>
it must be inside the <system.webServer>
</system.webServer>
You have to use the FormulaEvaluator, as shown here. This will return a value that is either the value present in the cell or the result of the formula if the cell contains such a formula :
FileInputStream fis = new FileInputStream("/somepath/test.xls");
Workbook wb = new HSSFWorkbook(fis); //or new XSSFWorkbook("/somepath/test.xls")
Sheet sheet = wb.getSheetAt(0);
FormulaEvaluator evaluator = wb.getCreationHelper().createFormulaEvaluator();
// suppose your formula is in B3
CellReference cellReference = new CellReference("B3");
Row row = sheet.getRow(cellReference.getRow());
Cell cell = row.getCell(cellReference.getCol());
if (cell!=null) {
switch (evaluator.evaluateFormulaCell(cell)) {
case Cell.CELL_TYPE_BOOLEAN:
System.out.println(cell.getBooleanCellValue());
break;
case Cell.CELL_TYPE_NUMERIC:
System.out.println(cell.getNumericCellValue());
break;
case Cell.CELL_TYPE_STRING:
System.out.println(cell.getStringCellValue());
break;
case Cell.CELL_TYPE_BLANK:
break;
case Cell.CELL_TYPE_ERROR:
System.out.println(cell.getErrorCellValue());
break;
// CELL_TYPE_FORMULA will never occur
case Cell.CELL_TYPE_FORMULA:
break;
}
}
if you need the exact contant (ie the formla if the cell contains a formula), then this is shown here.
Edit : Added a few example to help you.
first you get the cell (just an example)
Row row = sheet.getRow(rowIndex+2);
Cell cell = row.getCell(1);
If you just want to set the value into the cell using the formula (without knowing the result) :
String formula ="ABS((1-E"+(rowIndex + 2)+"/D"+(rowIndex + 2)+")*100)";
cell.setCellFormula(formula);
cell.setCellStyle(this.valueRightAlignStyleLightBlueBackground);
if you want to change the message if there is an error in the cell, you have to change the formula to do so, something like
IF(ISERR(ABS((1-E3/D3)*100));"N/A"; ABS((1-E3/D3)*100))
(this formula check if the evaluation return an error and then display the string "N/A", or the evaluation if this is not an error).
if you want to get the value corresponding to the formula, then you have to use the evaluator.
Hope this help,
Guillaume
Two other alternatives:
a combination of NULLIF
and NVL2
. You can only use this if emp_id
is NOT NULL
, which it is in your case:
select nvl2(nullif(emp_id,1),'False','True') from employee;
simple CASE
expression (Mt. Schneiders used a so-called searched CASE
expression)
select case emp_id when 1 then 'True' else 'False' end from employee;
One of the values you pass on to Ancestors
becomes None
at some point, it says, so check if otu
, tree
, tree[otu]
or tree[otu][0]
are None
in the beginning of the function instead of only checking tree[otu][0][0] == None
. But perhaps you should reconsider your path of action and the datatype in question to see if you could improve the structure somewhat.
With so many places where TransactionTooLargeException can happen-- here's one more new to Android 8--a crash when someone merely starts to type into an EditText if the content is too big.
It's related to the AutoFillManager (new in API 26) and the following code in StartSessionLocked()
:
mSessionId = mService.startSession(mContext.getActivityToken(),
mServiceClient.asBinder(), id, bounds, value, mContext.getUserId(),
mCallback != null, flags, mContext.getOpPackageName());
If I understand correctly, this calls the autofill service-- passing the AutofillManagerClient within the binder. And when the EditText has a lot of content, it seems to cause the TTLE.
A few things may mitigate it (or did as I was testing anyway): Add android:importantForAutofill="noExcludeDescendants"
in the EditText's xml layout declaration. Or in code:
EditText et = myView.findViewById(R.id.scriptEditTextView);
if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.O) {
et.setImportantForAutofill(View.IMPORTANT_FOR_AUTOFILL_NO_EXCLUDE_DESCENDANTS);
}
A 2nd awful, terrible workaround might also be to override the performClick()
and onWindowFocusChanged()
methods to catch the error in a TextEdit subclass itself. But I don't think that's wise really...
For iOS 7 I use this,
-(void)tableView:(UITableView *)tableView willDisplayHeaderView:(UIView *)view forSection:(NSInteger)section
{
UITableViewHeaderFooterView *header = (UITableViewHeaderFooterView *)view;
header.textLabel.font = [UIFont boldSystemFontOfSize:10.0f];
header.textLabel.textColor = [UIColor orangeColor];
}
Here is Swift 3.0 version with header resizing
override func tableView(_ tableView: UITableView, willDisplayHeaderView view: UIView, forSection section: Int) {
if let header = view as? UITableViewHeaderFooterView {
header.textLabel!.font = UIFont.systemFont(ofSize: 24.0)
header.textLabel!.textColor = UIColor.orange
}
}
Consider the case statement as well which is compatible with most sh-based shells:
case $str in
/*)
echo 1
;;
*)
echo 0
;;
esac
Working Example:
You can use the DOM scrollIntoView
method to make a component visible in the view.
For this, while rendering the component just give a reference ID for the DOM element using ref
attribute. Then use the method scrollIntoView
on componentDidMount
life cycle. I am just putting a working sample code for this solution. The following is a component rendering each time a message received. You should write code/methods for rendering this component.
class ChatMessage extends Component {
scrollToBottom = (ref) => {
this.refs[ref].scrollIntoView({ behavior: "smooth" });
}
componentDidMount() {
this.scrollToBottom(this.props.message.MessageId);
}
render() {
return(
<div ref={this.props.message.MessageId}>
<div>Message content here...</div>
</div>
);
}
}
Here this.props.message.MessageId
is the unique ID of the particular chat message passed as props
You can also just enter the website and:
The same limitation applies here: the folder must contain at least one file inside it.
Here is my simple approach.
$values = array();
foreach($workouts_id as $value){
$_value = "(".$value.",".$plan_id.")";
array_push($values,$_value);
}
$values_ = implode(",",$values);
$sql = "INSERT INTO plan_days(id,name) VALUES" . $values_."";
$stmt = $this->conn->prepare($sql);
$stmt->execute();
I think if you don't consider the VM, it is Integer.MaxValue
mvn validate clean install | egrep -v "(^\[INFO\])"
or
mvn validate clean install | egrep -v "(^\[INFO\]|^\[DEBUG\])"
mvn validate clean install | findstr /V /R "^\[INFO\] ^\[DEBUG\]"
The answer to this question is, perhaps surprisingly, never, or more realistically, only when you are forced to for interoperability with legacy code. This is the recommendation in Effective Java, 3rd Edition by Joshua Bloch:
There is no reason to use Java serialization in any new system you write
Oracle's chief architect, Mark Reinhold, is on record as saying removing the current Java serialization mechanism is a long-term goal.
Java provides as part of the language a serialization scheme you can opt in to, by using the Serializable
interface. This scheme however has several intractable flaws and should be treated as a failed experiment by the Java language designers.
Instead, use a serialization scheme that you can explicitly control. Such as Protocol Buffers, JSON, XML, or your own custom scheme.
simplest cross browser solution is
<img draggable="false" ondragstart="return false;" src="..." />
problem with
img {
-moz-user-select: none;
-webkit-user-select: none;
-ms-user-select: none;
user-select: none;
-webkit-user-drag: none;
user-drag: none;
-webkit-touch-callout: none;
}
is that it is not working in firefox
<body>
<table>
<tr><td colspan="2" rowspan="2">1</td><td colspan="4">2</td></tr>
<tr><td>3</td><td>3</td><td>3</td><td>3</td></tr>
<tr><td colspan="2">1</td><td>3</td><td>3</td><td>3</td><td>3</td></tr>
</table>
</body>
It sounds as if the only problem here is that the default editor that is launched is vi
or vim
, with which you're not familiar. (As quick tip, to exit that editor without saving changes, hit Esc a few times and then type :, q, ! and Enter.)
There are several ways to set up your default editor, and you haven't indicated which operating system you're using, so it's difficult to recommend one in particular. I'd suggest using:
git config --global core.editor "name-of-your-editor"
... which sets a global git preference for a particular editor. Alternatively you can set the $EDITOR
environment variable.
Use:
dateTimePicker.Value.ToString("yyyy/MM/dd")
Refer to the following link:
http://www.vbdotnetforums.com/schedule-time/15001-datetimepicker-format.html
d-block d-md-none
to hide on medium, large and extra large devices.
d-none d-md-block
to hide on small and extra-small devices.
Note that you can also inline by replacing d-*-block
with d-*-inline-block
Old answer: Bootstrap 4 Alpha
You can use the classes .hidden-*-up
to hide on a given size and larger devices
.hidden-md-up
to hide on medium, large and extra large devices.
The same goes with .hidden-*-down
to hide on a given size and smaller devices
.hidden-md-down
to hide on medium, small and extra-small devices
visible-* is no longer an option with bootstrap 4
To display only on medium devices, you can combine the two:
hidden-sm-down
andhidden-xl-up
The valid sizes are:
xs
for phones in portrait mode (<34em)sm
for phones in landscape mode (=34em)md
for tablets (=48em)lg
for desktops (=62em)xl
for desktops (=75em)This was as of Bootstrap 4, alpha 5 (January 2017). More details here: http://v4-alpha.getbootstrap.com/layout/responsive-utilities/
On Bootstrap 4.3.x: https://getbootstrap.com/docs/4.3/utilities/display/
Quoting from http://dev.mysql.com/doc/refman/5.1/en/create-table.html
{INDEX|KEY}
So KEY
is an INDEX
;)
A faster way is to use javascript directly, eg.
var parent = $(innerdiv.get(0).parentNode.parentNode.parentNode);
This runs significantly faster on my browser than chaining jQuery .parent()
calls.
I had this problem and was able to resolve it with the declaration below.
$.fn.bootstrapBtn = $.fn.button.noConflict();
Thanks all person who try to help in this post
I have ubuntu 13.10 and my chrome version is 34.0
For my situation this works
1.open developer tools in chrome(or use right click on your page and then select inspect element)
2.go to "Network" tab
3.find your ajax request in "Name Path" column
4.click on the specific ajax link
now you should see a new Panel in front of you request
in this panel select "Response" tab
When i use a new eclipse version and try to use the previous workspace which i used with old eclipse version, this error occured.
Here is how i solve the problem:
Right click my project on Package Explorer -> Properties -> Java Build Path -> Libraries -> I see an error(Cross Sign) on JRE System Library. Because the path cannot be found. -> Double click the JRE System Library -> Select the option "Workspace Default JRE" -> Finish -> OK. -> BUM IT IS WORKING
FYI.
An alternative to Ctrl+A, Ctrl+K is Ctrl+E, Ctrl+U.
class Element
{
public string Company;
public string TypeOfInvestment;
public decimal Worth;
}
class Program
{
static void Main(string[] args)
{
List<Element> elements = new List<Element>()
{
new Element { Company = "JPMORGAN CHASE",TypeOfInvestment = "Stocks", Worth = 96983 },
new Element { Company = "AMER TOWER CORP",TypeOfInvestment = "Securities", Worth = 17141 },
new Element { Company = "ORACLE CORP",TypeOfInvestment = "Assets", Worth = 59372 },
new Element { Company = "PEPSICO INC",TypeOfInvestment = "Assets", Worth = 26516 },
new Element { Company = "PROCTER & GAMBL",TypeOfInvestment = "Stocks", Worth = 387050 },
new Element { Company = "QUASLCOMM INC",TypeOfInvestment = "Bonds", Worth = 196811 },
new Element { Company = "UTD TECHS CORP",TypeOfInvestment = "Bonds", Worth = 257429 },
new Element { Company = "WELLS FARGO-NEW",TypeOfInvestment = "Bank Account", Worth = 106600 },
new Element { Company = "FEDEX CORP",TypeOfInvestment = "Stocks", Worth = 103955 },
new Element { Company = "CVS CAREMARK CP",TypeOfInvestment = "Securities", Worth = 171048 },
};
//Group by on multiple column in LINQ (Query Method)
var query = from e in elements
group e by new{e.TypeOfInvestment,e.Company} into eg
select new {eg.Key.TypeOfInvestment, eg.Key.Company, Points = eg.Sum(rl => rl.Worth)};
foreach (var item in query)
{
Console.WriteLine(item.TypeOfInvestment.PadRight(20) + " " + item.Points.ToString());
}
//Group by on multiple column in LINQ (Lambda Method)
var CompanyDetails =elements.GroupBy(s => new { s.Company, s.TypeOfInvestment})
.Select(g =>
new
{
company = g.Key.Company,
TypeOfInvestment = g.Key.TypeOfInvestment,
Balance = g.Sum(x => Math.Round(Convert.ToDecimal(x.Worth), 2)),
}
);
foreach (var item in CompanyDetails)
{
Console.WriteLine(item.TypeOfInvestment.PadRight(20) + " " + item.Balance.ToString());
}
Console.ReadLine();
}
}
Here is another solution which uses any/2
map(select(any(.Names[]; contains("data"))|not)|.Id)[]
with the sample data and the -r
option it produces
cb94e7a42732b598ad18a8f27454a886c1aa8bbba6167646d8f064cd86191e2b
a4b7e6f5752d8dcb906a5901f7ab82e403b9dff4eaaeebea767a04bac4aada19
basically i use this in one of our apps: we want to overlay a playicon over a frame of a video:
Image playbutton;
try
{
playbutton = Image.FromFile(/*somekindofpath*/);
}
catch (Exception ex)
{
return;
}
Image frame;
try
{
frame = Image.FromFile(/*somekindofpath*/);
}
catch (Exception ex)
{
return;
}
using (frame)
{
using (var bitmap = new Bitmap(width, height))
{
using (var canvas = Graphics.FromImage(bitmap))
{
canvas.InterpolationMode = InterpolationMode.HighQualityBicubic;
canvas.DrawImage(frame,
new Rectangle(0,
0,
width,
height),
new Rectangle(0,
0,
frame.Width,
frame.Height),
GraphicsUnit.Pixel);
canvas.DrawImage(playbutton,
(bitmap.Width / 2) - (playbutton.Width / 2),
(bitmap.Height / 2) - (playbutton.Height / 2));
canvas.Save();
}
try
{
bitmap.Save(/*somekindofpath*/,
System.Drawing.Imaging.ImageFormat.Jpeg);
}
catch (Exception ex) { }
}
}
Why don't you simply move the code you have in the ApiController calls - DocumentsController to a class that you can call from both your HomeController and DocumentController. Pull this out into a class you call from both controllers. This stuff in your question:
// All code to find the files are here and is working perfectly...
It doesn't make sense to call a API Controller from another controller on the same website.
This will also simplify the code when you come back to it in the future you will have one common class for finding the files and doing that logic there...
This is a simple script I used in Python but it can be easily adapted. Nothing fancy though.
def occurance(arr):
results = []
for n in arr:
data = {}
data["point"] = n
data["count"] = 0
for i in range(0, len(arr)):
if n == arr[i]:
data["count"] += 1
results.append(data)
return results
What about -mmin
?
find /var/www/html/audio -daystart -maxdepth 1 -mmin +59 -type f -name "*.mp3" \
-exec rm -f {} \;
From man find:
-mmin n File's data was last modified n minutes ago.
Also, make sure to test this first!
... -exec echo rm -f '{}' \; ^^^^ Add the 'echo' so you just see the commands that are going to get run instead of actual trying them first.
Looks like you're missing the SEPARATOR keyword in the GROUP_CONCAT function.
GROUP_CONCAT(artists.artistname SEPARATOR '----')
The way you've written it, you're concatenating artists.artistname
with the '----'
string using the default comma separator.
Use parseInt()
.
var num = 2.9
console.log(parseInt(num, 10)); // 2
You can also use |
.
var num = 2.9
console.log(num | 0); // 2
If you have the authority to edit the pages to be opened, you can href to 'A' page and in the A page you can put link to B page in onpageload attribute of body tag.
Do the move and the modify in separate commits.
You can do it this simple way :
A1 = Mahi
A2 = NULL(blank)
Select A2 Right click on cell --> Format cells --> change to TEXT
Then put the date in A2 (A2 =31/07/1990)
Then concatenate it will work. No need of any formulae.
=CONCATENATE(A1,A2)
mahi31/07/1990
(This works on the empty cells ie.,Before entering the DATE value to cell you need to make it as TEXT).
Five ways, 4 for bash and 1 addition for zsh:
type foobar &> /dev/null
hash foobar &> /dev/null
command -v foobar &> /dev/null
which foobar &> /dev/null
(( $+commands[foobar] ))
(zsh only)You can put any of them to your if
clause. According to my tests (https://www.topbug.net/blog/2016/10/11/speed-test-check-the-existence-of-a-command-in-bash-and-zsh/), the 1st and 3rd method are recommended in bash and the 5th method is recommended in zsh in terms of speed.
Suppose you have a function:
def sinus2d(x, y):
return np.sin(x) + np.sin(y)
and you want, for example, to see what it looks like in the range 0 to 2*pi. How would you do it? There np.meshgrid
comes in:
xx, yy = np.meshgrid(np.linspace(0,2*np.pi,100), np.linspace(0,2*np.pi,100))
z = sinus2d(xx, yy) # Create the image on this grid
and such a plot would look like:
import matplotlib.pyplot as plt
plt.imshow(z, origin='lower', interpolation='none')
plt.show()
So np.meshgrid
is just a convenience. In principle the same could be done by:
z2 = sinus2d(np.linspace(0,2*np.pi,100)[:,None], np.linspace(0,2*np.pi,100)[None,:])
but there you need to be aware of your dimensions (suppose you have more than two ...) and the right broadcasting. np.meshgrid
does all of this for you.
Also meshgrid allows you to delete coordinates together with the data if you, for example, want to do an interpolation but exclude certain values:
condition = z>0.6
z_new = z[condition] # This will make your array 1D
so how would you do the interpolation now? You can give x
and y
to an interpolation function like scipy.interpolate.interp2d
so you need a way to know which coordinates were deleted:
x_new = xx[condition]
y_new = yy[condition]
and then you can still interpolate with the "right" coordinates (try it without the meshgrid and you will have a lot of extra code):
from scipy.interpolate import interp2d
interpolated = interp2d(x_new, y_new, z_new)
and the original meshgrid allows you to get the interpolation on the original grid again:
interpolated_grid = interpolated(xx[0], yy[:, 0]).reshape(xx.shape)
These are just some examples where I used the meshgrid
there might be a lot more.
Here is how I configured my VS for C++ using g++ compiler and it works great including debugging options:
tasks.json file
{
"version": "0.1.0",
"command": "g++",
"isShellCommand": true,
// compiles and links with debugger information
"args": ["-g", "-o", "hello.exe", "hello.cpp"],
// without debugger information
// "args": ["-o", "hello.exe", "hello.cpp"],
"showOutput": "always"
}
launch.json file
{
"version": "0.2.0",
"configurations": [
{
"name": "C++ Launch (Windows)",
"type": "cppdbg",
"request": "launch",
"program": "${workspaceRoot}/hello.exe",
"MIMode": "gdb",
"miDebuggerPath": "C:\\MinGw\\bin\\gdb.exe",
"stopAtEntry": false,
"cwd": "${workspaceRoot}",
"externalConsole": false,
"visualizerFile": "${workspaceRoot}/my.natvis"
}
]
}
I also have 'C/C++ for Visual Studio Code' extension installed in VS Code
Here’s a better starts with function:
function mb_startsWith($str, $prefix, $encoding=null) {
if (is_null($encoding)) $encoding = mb_internal_encoding();
return mb_substr($str, 0, mb_strlen($prefix, $encoding), $encoding) === $prefix;
}
Integers (int
for short) are the numbers you count with 0, 1, 2, 3 ... and their negative counterparts ... -3, -2, -1 the ones without the decimal part.
So once you introduce a decimal point, your not really dealing with integers. You're dealing with rational numbers. The Python float or decimal types are what you want to represent or approximate these numbers.
You may be used to a language that automatically does this for you(Php). Python, though, has an explicit preference for forcing code to be explicit instead implicit.
If this is a SQL question, and I understand what you are asking, (it's not entirely clear), just add distinct to the query
Select Distinct * From TempTable
I wrote this a while ago to remind myself of what a closure is and how it works in JS.
A closure is a function that, when called, uses the scope in which it was declared, not the scope in which it was called. In javaScript, all functions behave like this. Variable values in a scope persist as long as there is a function that still points to them. The exception to the rule is 'this', which refers to the object that the function is inside when it is called.
var z = 1;
function x(){
var z = 2;
y(function(){
alert(z);
});
}
function y(f){
var z = 3;
f();
}
x(); //alerts '2'
There is a special identifier that one can use in a formula to mean all the variables, it is the .
identifier.
y <- c(1,4,6)
d <- data.frame(y = y, x1 = c(4,-1,3), x2 = c(3,9,8), x3 = c(4,-4,-2))
mod <- lm(y ~ ., data = d)
You can also do things like this, to use all variables but one (in this case x3 is excluded):
mod <- lm(y ~ . - x3, data = d)
Technically, .
means all variables not already mentioned in the formula. For example
lm(y ~ x1 * x2 + ., data = d)
where .
would only reference x3
as x1
and x2
are already in the formula.
In addition to the registers being used for mass operations, they are useful for their property of being preserved through a function call (call-preserved) in 32-bit calling convention. The ESI, EDI, EBX, EBP, ESP are call-preserved whereas EAX, ECX and EDX are not call-preserved. Call-preserved registers are respected by C library function and their values persist through the C library function calls.
Jeff Duntemann in his assembly language book has an example assembly code for printing the command line arguments. The code uses esi and edi to store counters as they will be unchanged by the C library function printf. For other registers like eax, ecx, edx, there is no guarantee of them not being used by the C library functions.
https://www.amazon.com/Assembly-Language-Step-Step-Programming/dp/0470497025
See section 12.8 How C sees Command-Line Arguments.
Note that 64-bit calling conventions are different from 32-bit calling conventions, and I am not sure if these registers are call-preserved or not.
This seemed to have worked for me!
Mat a_image = imread(argv[1]);
cvtColor(a_image, a_image, CV_BGR2GRAY);
GaussianBlur(a_image, a_image, Size(7,7), 1.5, 1.5);
threshold(a_image, a_image, 100, 255, CV_THRESH_BINARY);
Use the fnReloadAjax() by the DataTables.net author.
I'm copying the source code below - in case the original ever moves:
$.fn.dataTableExt.oApi.fnReloadAjax = function ( oSettings, sNewSource, fnCallback, bStandingRedraw )
{
if ( typeof sNewSource != 'undefined' && sNewSource != null )
{
oSettings.sAjaxSource = sNewSource;
}
this.oApi._fnProcessingDisplay( oSettings, true );
var that = this;
var iStart = oSettings._iDisplayStart;
var aData = [];
this.oApi._fnServerParams( oSettings, aData );
oSettings.fnServerData( oSettings.sAjaxSource, aData, function(json) {
/* Clear the old information from the table */
that.oApi._fnClearTable( oSettings );
/* Got the data - add it to the table */
var aData = (oSettings.sAjaxDataProp !== "") ?
that.oApi._fnGetObjectDataFn( oSettings.sAjaxDataProp )( json ) : json;
for ( var i=0 ; i<aData.length ; i++ )
{
that.oApi._fnAddData( oSettings, aData[i] );
}
oSettings.aiDisplay = oSettings.aiDisplayMaster.slice();
that.fnDraw();
if ( typeof bStandingRedraw != 'undefined' && bStandingRedraw === true )
{
oSettings._iDisplayStart = iStart;
that.fnDraw( false );
}
that.oApi._fnProcessingDisplay( oSettings, false );
/* Callback user function - for event handlers etc */
if ( typeof fnCallback == 'function' && fnCallback != null )
{
fnCallback( oSettings );
}
}, oSettings );
}
/* Example call to load a new file */
oTable.fnReloadAjax( 'media/examples_support/json_source2.txt' );
/* Example call to reload from original file */
oTable.fnReloadAjax();
I prefer to do it in a more direct fashion. It does not have the Rows but is still has the array of rows.
tblCrm.DefaultView.RowFilter = "customertype = 'new'";
qtytotal = 0;
for (int i = 0; i < tblCrm.DefaultView.Count; i++)
{
result = double.TryParse(tblCrm.DefaultView[i]["qty"].ToString(), out num);
if (result == false) num = 0;
qtytotal = qtytotal + num;
}
labQty.Text = qtytotal.ToString();
I understand you've solved your issue, but for others reading this thread, here is the answer: you have to increase the stack that your operating system allocates for the python process.
The way to do it, is operating system dependant. In linux, you can check with the command ulimit -s
your current value and you can increase it with ulimit -s <new_value>
Try doubling the previous value and continue doubling if it does not work, until you find one that does or run out of memory.
TLDR - In addition to the previous responses. There might be a problem with the version of the fastboot
command. Try to download the newest one via Android SDK Manager instead of default one available in the OS repository.
There is one more thing you can do to fix this issue. I had the similar problem when trying to flash Nexus Player. All the adb commands we working fine while in normal boot mode. However, after switching to fastboot mode I wasn't able to execute fastboot commands. My device was not visible in the output of the fastboot devices
command. I've set the right rules in /etc/udev/rules.d/11-android.rules file. The lsusb
command showed that the device has been pluged in.
The soultion was quite simple. I've downloaded the the fastboot
via Android Studio's SDK Manager instead of using the default one available in Ubuntu packages.
All you need is sdkmanager. Download the Android SDK Platform Tools and replace the default /usr/bin/fastboot with the new one.
With formulas, what you can do is:
D2
), add =COUNTA(A2:C2)
D4
in our example)D5
): =SUM(D2:D4)
>>> lis=[[180.0], [173.8], [164.2], [156.5], [147.2], [138.2]]
>>> [x[0] for x in lis]
[180.0, 173.8, 164.2, 156.5, 147.2, 138.2]
You can use show innodb status
(or show engine innodb status
for newer versions of mysql) to get a list of all the actions currently pending inside the InnoDB engine. Buried in the wall of output will be the transactions, and what internal process ID they're running under.
You won't be able to force a commit or rollback of those transactions, but you CAN kill the MySQL process running them, which does essentially boil down to a rollback. It kills the processes' connection and causes MySQL to clean up the mess its left.
Here's what you'd want to look for:
------------
TRANSACTIONS
------------
Trx id counter 0 140151
Purge done for trx's n:o < 0 134992 undo n:o < 0 0
History list length 10
LIST OF TRANSACTIONS FOR EACH SESSION:
---TRANSACTION 0 0, not started, process no 17004, OS thread id 140621902116624
MySQL thread id 10594, query id 10269885 localhost marc
show innodb status
In this case, there's just one connection to the InnoDB engine right now (my login, running the show
query). If that line were an actual connection/stuck transaction you'd want to terminate, you'd then do a kill 10594
.
A simple way using std::next_permutation
:
#include <iostream>
#include <algorithm>
#include <vector>
int main() {
int n, r;
std::cin >> n;
std::cin >> r;
std::vector<bool> v(n);
std::fill(v.end() - r, v.end(), true);
do {
for (int i = 0; i < n; ++i) {
if (v[i]) {
std::cout << (i + 1) << " ";
}
}
std::cout << "\n";
} while (std::next_permutation(v.begin(), v.end()));
return 0;
}
or a slight variation that outputs the results in an easier to follow order:
#include <iostream>
#include <algorithm>
#include <vector>
int main() {
int n, r;
std::cin >> n;
std::cin >> r;
std::vector<bool> v(n);
std::fill(v.begin(), v.begin() + r, true);
do {
for (int i = 0; i < n; ++i) {
if (v[i]) {
std::cout << (i + 1) << " ";
}
}
std::cout << "\n";
} while (std::prev_permutation(v.begin(), v.end()));
return 0;
}
A bit of explanation:
It works by creating a "selection array" (v
), where we place r
selectors, then we create all permutations of these selectors, and print the corresponding set member if it is selected in in the current permutation of v
.
You can implement it if you note that for each level r you select a number from 1 to n.
In C++, we need to 'manually' keep the state between calls that produces results (a combination): so, we build a class that on construction initialize the state, and has a member that on each call returns the combination while there are solutions: for instance
#include <iostream>
#include <iterator>
#include <vector>
#include <cstdlib>
using namespace std;
struct combinations
{
typedef vector<int> combination_t;
// initialize status
combinations(int N, int R) :
completed(N < 1 || R > N),
generated(0),
N(N), R(R)
{
for (int c = 1; c <= R; ++c)
curr.push_back(c);
}
// true while there are more solutions
bool completed;
// count how many generated
int generated;
// get current and compute next combination
combination_t next()
{
combination_t ret = curr;
// find what to increment
completed = true;
for (int i = R - 1; i >= 0; --i)
if (curr[i] < N - R + i + 1)
{
int j = curr[i] + 1;
while (i <= R-1)
curr[i++] = j++;
completed = false;
++generated;
break;
}
return ret;
}
private:
int N, R;
combination_t curr;
};
int main(int argc, char **argv)
{
int N = argc >= 2 ? atoi(argv[1]) : 5;
int R = argc >= 3 ? atoi(argv[2]) : 2;
combinations cs(N, R);
while (!cs.completed)
{
combinations::combination_t c = cs.next();
copy(c.begin(), c.end(), ostream_iterator<int>(cout, ","));
cout << endl;
}
return cs.generated;
}
test output:
1,2,
1,3,
1,4,
1,5,
2,3,
2,4,
2,5,
3,4,
3,5,
4,5,
If you simply want to add it without creating a new class try this:
// WPF
<ComboBox Name="language" Loaded="language_Loaded" />
// C# code
private void language_Loaded(object sender, RoutedEventArgs e)
{
List<String> language= new List<string>();
language.Add("English");
language.Add("Spanish");
language.Add("ect");
this.chartReviewComboxBox.ItemsSource = language;
}
I suggest an xml file with all your languages that you will support that way you do not have to be dependent on c# I would definitly create a class for languge like the above programmer suggest.
Margin is space outside the box; padding is space inside the box. It's hard to see the difference with a white fill, but with a colored fill you can see it fine.
Very old question, but in case someone else stumbles across it, I would recommend trying:
$j("html, body").stop(true, true).animate({
scrollTop: $j('#main').offset().top
}, 300);
numba
module for speed up.On big datasets (500k >
) pd.cut
can be quite slow for binning data.
I wrote my own function in numba
with just in time compilation, which is roughly 16x
faster:
from numba import njit
@njit
def cut(arr):
bins = np.empty(arr.shape[0])
for idx, x in enumerate(arr):
if (x >= 0) & (x < 1):
bins[idx] = 1
elif (x >= 1) & (x < 5):
bins[idx] = 2
elif (x >= 5) & (x < 10):
bins[idx] = 3
elif (x >= 10) & (x < 25):
bins[idx] = 4
elif (x >= 25) & (x < 50):
bins[idx] = 5
elif (x >= 50) & (x < 100):
bins[idx] = 6
else:
bins[idx] = 7
return bins
cut(df['percentage'].to_numpy())
# array([5., 5., 7., 5.])
Optional: you can also map it to bins as strings:
a = cut(df['percentage'].to_numpy())
conversion_dict = {1: 'bin1',
2: 'bin2',
3: 'bin3',
4: 'bin4',
5: 'bin5',
6: 'bin6',
7: 'bin7'}
bins = list(map(conversion_dict.get, a))
# ['bin5', 'bin5', 'bin7', 'bin5']
Speed comparison:
# create dataframe of 8 million rows for testing
dfbig = pd.concat([df]*2000000, ignore_index=True)
dfbig.shape
# (8000000, 1)
%%timeit
cut(dfbig['percentage'].to_numpy())
# 38 ms ± 616 µs per loop (mean ± std. dev. of 7 runs, 10 loops each)
%%timeit
bins = [0, 1, 5, 10, 25, 50, 100]
labels = [1,2,3,4,5,6]
pd.cut(dfbig['percentage'], bins=bins, labels=labels)
# 215 ms ± 9.76 ms per loop (mean ± std. dev. of 7 runs, 10 loops each)
ORDER BY column OFFSET 0 ROWS
Surprisingly makes it work, what a strange feature.
A bigger example with a CTE as a way to temporarily "store" a long query to re-order it later:
;WITH cte AS (
SELECT .....long select statement here....
)
SELECT * FROM
(
SELECT * FROM
( -- necessary to nest selects for union to work with where & order clauses
SELECT * FROM cte WHERE cte.MainCol= 1 ORDER BY cte.ColX asc OFFSET 0 ROWS
) first
UNION ALL
SELECT * FROM
(
SELECT * FROM cte WHERE cte.MainCol = 0 ORDER BY cte.ColY desc OFFSET 0 ROWS
) last
) as unionized
ORDER BY unionized.MainCol desc -- all rows ordered by this one
OFFSET @pPageSize * @pPageOffset ROWS -- params from stored procedure for pagination, not relevant to example
FETCH FIRST @pPageSize ROWS ONLY -- params from stored procedure for pagination, not relevant to example
So we get all results ordered by MainCol
But the results with MainCol = 1
get ordered by ColX
And the results with MainCol = 0
get ordered by ColY
It's a bad idea to count the td
elements to get the number of columns in your table, because td
elements can span multiple columns with colspan
.
Here's a simple solution using jquery:
var length = 0;_x000D_
$("tr:first").find("td,th").each(function(){_x000D_
var colspan = $(this).attr("colspan");_x000D_
if(typeof colspan !== "undefined" && colspan > 0){_x000D_
length += parseInt(colspan);_x000D_
}else{_x000D_
length += 1;_x000D_
}_x000D_
});_x000D_
_x000D_
$("div").html("number of columns: "+length);
_x000D_
<script src="https://cdnjs.cloudflare.com/ajax/libs/jquery/3.3.1/jquery.min.js"></script>_x000D_
<table>_x000D_
<tr>_x000D_
<td>single</td>_x000D_
<td colspan="2">double</td>_x000D_
<td>single</td>_x000D_
<td>single</td>_x000D_
</tr>_x000D_
</table>_x000D_
<div></div>
_x000D_
For a plain Javascript solution, see Emilio's answer.
Try this Javascript (jquery) code. Its an ajax request to an external URL. Use the callback function to fire any code:
<script type="text/javascript">
$(function() {
$('form').submit(function(){
$.post('http://example.com/upload', function() {
window.location = 'http://google.com';
});
return false;
});
});
</script>
The beauty of C++, like C, is that the sized of these things are implementation-defined, so there's no correct answer without your specifying the compiler you're using. Are those two the same? Yes. "long long" is a synonym for "long long int", for any compiler that will accept both.
Travesal is O(n) for any order - because you are hitting each node once. Lookup is where it can be less than O(n) IF the tree has some sort of organizing schema (ie binary search tree).
Following code create a sequence random number between [1,m] that was not generated before.
public class NewClass {
public List<Integer> keys = new ArrayList<Integer>();
public int rand(int m) {
int n = (int) (Math.random() * m + 1);
if (!keys.contains(n)) {
keys.add(n);
return n;
} else {
return rand(m);
}
}
public static void main(String[] args) {
int m = 4;
NewClass ne = new NewClass();
for (int i = 0; i < 4; i++) {
System.out.println(ne.rand(m));
}
System.out.println("list: " + ne.keys);
}
}
If MySQLdb's now distributed in a way that requires setuptools
, your choices are either to download the latter (e.g. from here) or refactor MySQLdb's setup.py to bypass setuptools
(maybe just importing setup
and Extension
from plain distutils
instead might work, but you may also need to edit some of the setup_*.py
files in the same directory).
Depending on how your site's Python installation is configured, installing extensions for your own individual use without requiring sysadm rights may be hard, but it's never truly impossible if you have shell access. You'll need to tweak your Python's sys.path to start with a directory of your own that's your personal equivalent of the system-wide site pacages directory, e.g. by setting PYTHONPATH
persistently in your own environment, and then manually place in said personal directory what normal installs would normally place in site-packages (and/or subdirectories thereof).
In Rails 3.2.18, :decimal turns into :integer when using SQLServer, but it works fine in SQLite. Switching to :float solved this issue for us.
The lesson learned is "always use homogeneous development and deployment databases!"
You can use a challenge response scheme. Say the client and server both know a secret S. Then the server can be sure that the client knows the password (without giving it away) by:
Edit:
There is an issue here with the freshness of R and the fact that HTTP is stateless. This can be handled by having the server create a secret, call it Q, that only the server knows. Then the protocol goes like this:
To note, since H(R,Q) cannot be forged by the client, H(R,Q) acts as a cookie (and could therefore be implemented actually as a cookie).
Another Edit:
The previous edit to the protocol is incorrect as anyone who has observed H(R,Q) seems to be able to replay it with the correct hash. The server has to remember which R's are no longer fresh. I'm CW'ing this answer so you guys can edit away at this and work out something good.
I would recommend that start using mysqli_() and stop using mysql_()
Check the following page: LINK
Warning This extension was deprecated in PHP 5.5.0, and it was removed in PHP 7.0.0. Instead, the MySQLi or PDO_MySQL extension should be used. See also MySQL: choosing an API guide and related FAQ for more information. Alternatives to this function include: mysqli_affected_rows() PDOStatement::rowCount()
Delete the repository folder from "C:\Users\usename.m2" and create again or update maven project.
The filename should go at the end of the path to the directory. That is, it should be the full path to the file. You are doing this from a command line, and you have a working directory for that command line (on your local machine), this is the directory that your file will be downloaded to. The final argument in your command is only what you want the name of the file to be. So, first, change directory to where you want the file to land. I'm doing this from git bash on a Windows machine, so it looks like this:
cd C:\Users\myUserName\Downloads
Now that I have my working directory where I want the file to go:
scp -i 'c:\Users\myUserName\.ssh\AWSkeyfile.pem' [email protected]:/home/ec2-user/IwantThisFile.tar IgotThisFile.tar
Or, in your case:
cd /local/path/where/you/want/the/file/to/land
scp [email protected]:/local/machine/path/to/directory/filename filename
char c1 = (char)97; //c1 = 'a'
int i = 98;
char c2 = (char)i; //c2 = 'b'
New, improved answer to an old, frequently asked question...
How could I get its parent? Result should be the
store
node.
parent::
or ancestor::
axisMost answers here select the title
and then traverse up to the targeted parent or ancestor (store
) element. A simpler, direct approach is to select parent or ancestor element directly in the first place, obviating the need to traverse to a parent::
or ancestor::
axes:
//*[book/title = "50"]
Should the intervening elements vary in name:
//*[*/title = "50"]
Or, in name and depth:
//*[.//title = "50"]
In Android Studios 2.1.1, the command-line Options is under "Build, Execution, Deployment">"Compiler"
No one has yet pointed out that ForEach<T> results in compile time type checking where the foreach keyword is runtime checked.
Having done some refactoring where both methods were used in the code, I favor .ForEach, as I had to hunt down test failures / runtime failures to find the foreach problems.
For Apache 2.4.9
in addition, look at the httpd-vhosts.conf file in C:\wamp\bin\apache\apache2.4.9\conf\extra
<VirtualHost *:80>
ServerName localhost
ServerAlias localhost
DocumentRoot C:/wamp/www
<Directory "C:/wamp/www/">
Options Indexes FollowSymLinks MultiViews
AllowOverride all
Require local
</Directory>
</VirtualHost>
Change to:
<VirtualHost *:80>
ServerName localhost
ServerAlias localhost
DocumentRoot C:/wamp/www
<Directory "C:/wamp/www/">
Options Indexes FollowSymLinks MultiViews
AllowOverride all
Require all granted
</Directory>
</VirtualHost>
changing from "Require local" to "Require all granted" solved the error 403 in my local network
itoa
or itof
functions because they are non-standard and therefore not portable.Use string streams
#include <sstream> //include this to use string streams
#include <string>
int main()
{
int number = 1234;
std::ostringstream ostr; //output string stream
ostr << number; //use the string stream just like cout,
//except the stream prints not to stdout but to a string.
std::string theNumberString = ostr.str(); //the str() function of the stream
//returns the string.
//now theNumberString is "1234"
}
Note that you can use string streams also to convert floating-point numbers to string, and also to format the string as you wish, just like with cout
std::ostringstream ostr;
float f = 1.2;
int i = 3;
ostr << f << " + " i << " = " << f + i;
std::string s = ostr.str();
//now s is "1.2 + 3 = 4.2"
You can use stream manipulators, such as std::endl
, std::hex
and functions std::setw()
, std::setprecision()
etc. with string streams in exactly the same manner as with cout
Do not confuse std::ostringstream
with std::ostrstream
. The latter is deprecated
Use boost lexical cast. If you are not familiar with boost, it is a good idea to start with a small library like this lexical_cast. To download and install boost and its documentation go here. Although boost isn't in C++ standard many libraries of boost get standardized eventually and boost is widely considered of the best C++ libraries.
Lexical cast uses streams underneath, so basically this option is the same as the previous one, just less verbose.
#include <boost/lexical_cast.hpp>
#include <string>
int main()
{
float f = 1.2;
int i = 42;
std::string sf = boost::lexical_cast<std::string>(f); //sf is "1.2"
std::string si = boost::lexical_cast<std::string>(i); //sf is "42"
}
The most lightweight option, inherited from C, is the functions atoi
(for integers (alphabetical to integer)) and atof
(for floating-point values (alphabetical to float)). These functions take a C-style string as an argument (const char *
) and therefore their usage may be considered a not exactly good C++ practice. cplusplus.com has easy-to-understand documentation on both atoi and atof including how they behave in case of bad input. However the link contains an error in that according to the standard if the input number is too large to fit in the target type, the behavior is undefined.
#include <cstdlib> //the standard C library header
#include <string>
int main()
{
std::string si = "12";
std::string sf = "1.2";
int i = atoi(si.c_str()); //the c_str() function "converts"
double f = atof(sf.c_str()); //std::string to const char*
}
Use string streams (this time input string stream, istringstream
). Again, istringstream is used just like cin
. Again, do not confuse istringstream
with istrstream
. The latter is deprecated.
#include <sstream>
#include <string>
int main()
{
std::string inputString = "1234 12.3 44";
std::istringstream istr(inputString);
int i1, i2;
float f;
istr >> i1 >> f >> i2;
//i1 is 1234, f is 12.3, i2 is 44
}
Use boost lexical cast.
#include <boost/lexical_cast.hpp>
#include <string>
int main()
{
std::string sf = "42.2";
std::string si = "42";
float f = boost::lexical_cast<float>(sf); //f is 42.2
int i = boost::lexical_cast<int>(si); //i is 42
}
In case of a bad input, lexical_cast
throws an exception of type boost::bad_lexical_cast
I am not sure and not really trust $_SERVER['HTTP_HOST']
because it depend on header from client. In another way, if a domain requested by client is not mine one, they will not getting into my site because DNS and TCP/IP protocol point it to the correct destination. However I don't know if possible to hijack the DNS, network or even Apache server. To be safe, I define host name in environment and compare it with $_SERVER['HTTP_HOST']
.
Add SetEnv MyHost domain.com
in .htaccess file on root and add ths code in Common.php
if (getenv('MyHost')!=$_SERVER['HTTP_HOST']) {
header($_SERVER['SERVER_PROTOCOL'].' 400 Bad Request');
exit();
}
I include this Common.php file in every php page. This page doing anything required for each request like session_start()
, modify session cookie and reject if post method come from different domain.
Using a simple link for an action such as removing a record looks dangerous to me : what if a crawler is trying to index your pages ? It will ignore any javascript and follow every link, probably not a good thing.
You'd better use a form with method="POST".
And then you will have an event "OnSubmit" to do exactly what you want...
I followed https://www.mysysadmintips.com/windows/clients/761-move-android-studio-avd-folder-to-a-new-location.
Start copying a folder "C:\Users\user\.android\avd" to "D:\Android\.android\avd" (or something else).
Close Android Studio and running emulators.
Press Win + Break
and open Advanced System Settings
. Then press Environment Variables
. Add a user variable ANDROID_SDK_HOME
. (I didn't experiment with ANDROID_AVD_HOME
.) In Variable value
field write D:\Android
. If you also moved SDK to another folder, change ANDROID_HOME
(I forgot to change it and some emulators didn't launch, see https://stackoverflow.com/a/57408085/2914140).
Wait until the folder will finish copying and start Android Studio.
Open Android Virtual Device Manager
and see a list of emulators. If you don't see emulators and they existed, then probably you entered wrong path into user variable value in step 3. In this case close AS, change the variable and open AS again.
Start any emulator. It will try to restore it's state, but it sometimes fails. A black screen can appear instead of Android wallpaper.
In this case you can:
a. Restart your emulator. To do this close running emulator, then in AVD Manager click Cold Boot Now
.
b. If this didn't help, open emulator settings, found in file "D:\Android\.android\avd\Pixel_API_27.ini".
Change a path to a new AVD folder. Restart the emulator.
You can do it without having to create a real Hibernate mapping. Try this:
SELECT * FROM Employee e, Team t WHERE e.Id_team=t.Id_team
You can use an array and unpack it inside the select:
cols = ['_2','_4','_5']
df.select(*cols).show()
You have to use parseInt() to convert
For eg.
var z = parseInt(x) + parseInt(y);
use parseFloat() if you want to handle float value.
In Activit.XML add the code
<EditText
android:layout_width="match_parent"
android:layout_height="wrap_content"
android:inputType="textPersonName"
android:ems="10"
android:id="@+id/editText"
android:hint="Informe o usuário"
android:backgroundTint="@android:color/transparent"/>
Where BackgroundTint=color
for your desired colour
Deleting the file will also remove the content. See remove file.
Nothing against the other answers, but I found the brief explanation in the docs more easily understandable than the examples in them:
func append
func append(slice []Type, elems ...Type) []Type
The append built-in function appends elements to the end of a slice. If it has sufficient capacity, the destination is resliced to accommodate the new elements. If it does not, a new underlying array will be allocated. Append returns the updated slice. It is therefore necessary to store the result of append, often in the variable holding the slice itself:slice = append(slice, elem1, elem2) slice = append(slice, anotherSlice...)
As a special case, it is legal to append a string to a byte slice, like this:
slice = append([]byte("hello "), "world"...)
To give gradient color to UIView (swift 4.2)
func makeGradientLayer(`for` object : UIView, startPoint : CGPoint, endPoint : CGPoint, gradientColors : [Any]) -> CAGradientLayer {
let gradient: CAGradientLayer = CAGradientLayer()
gradient.colors = gradientColors
gradient.locations = [0.0 , 1.0]
gradient.startPoint = startPoint
gradient.endPoint = endPoint
gradient.frame = CGRect(x: 0, y: 0, w: object.frame.size.width, h: object.frame.size.height)
return gradient
}
How to use
let start : CGPoint = CGPoint(x: 0.0, y: 1.0)
let end : CGPoint = CGPoint(x: 1.0, y: 1.0)
let gradient: CAGradientLayer = makeGradientLayer(for: cell, startPoint: start, endPoint: end, gradientColors: [
UIColor(red:0.92, green:0.07, blue:0.4, alpha:1).cgColor,
UIColor(red:0.93, green:0.11, blue:0.14, alpha:1).cgColor
])
self.vwTemp.layer.insertSublayer(gradient, at: 0)
You can implement this functionality like this
Firstly, using the ls command pointed to the targeted directory. Later using find command filter the result from it.
From your case, it sounds like - always the filename starts with a word
file***.txt
ls /some/path/here | find . -name 'file*.txt' (* represents some wild card search)
I think you're looking for the stat
function (perldoc -f stat
)
In particular, the 9th field (10th, index #9) of the returned list is the last modify time of the file in seconds since the epoch.
So:
my $last_modified = (stat($fh))[9];
From http://www.epochconverter.com/
SELECT DATEDIFF(s, '1970-01-01 00:00:00', GETUTCDATE())
My bad, SELECT unix_timestamp(time) Time format: YYYY-MM-DD HH:MM:SS or YYMMDD or YYYYMMDD. More on using timestamps with MySQL:
http://www.epochconverter.com/programming/mysql-from-unixtime.php
Try with this combination of Lambda expressions:
employees.ToList().ForEach(emp =>
{
collection.AddRange(emp.Departments);
emp.Departments.ToList().ForEach(dept => dept.SomeProperty = null);
});
I had the similar issue using Flurl.Http:
Flurl.Http.FlurlHttpException: Call failed. Cannot send a content-body with this verb-type. GET http://******:8301/api/v1/agents/**** ---> System.Net.ProtocolViolationException: Cannot send a content-body with this verb-type.
The problem was I used .WithHeader("Content-Type", "application/json")
when creating IFlurlRequest.
Seems you are using outdated version of django.. Simply update django and try again.. Following command will update your django version..
pip install --upgrade django
Per @EthanB suggestion and @karim making a back filled rectangle, I just created a category for the UIButton to achieve this.
Just drop in the Category code: https://github.com/zmonteca/UIButton-PLColor
Usage:
[button setBackgroundColor:uiTextColor forState:UIControlStateDisabled];
Optional forStates to use:
UIControlStateNormal
UIControlStateHighlighted
UIControlStateDisabled
UIControlStateSelected
I was just able to successfully trigger builds on commit using the Hooks option in Bitbucket to a Jenkins instance with the following steps (similar as link):
The endpoint did not require inserting the basic HTTP auth in the URL despite using authentication, I did not use the Module Name field and the Project Name was entered case sensitive including a space in my test case. The build did not always trigger immediately but relatively fast. One other thing you may consider is disabling the "Prevent Cross Site Request Forgery exploits" option in "Configure Global Security" for testing as I've experienced all sorts of API difficulties from existing integrations when this option was enabled.
Some good answers already make use of calendar but the effect of setting the locale hasn't been mentioned yet.
Calendar set month names according to the current locale, for exemple in French:
import locale
import calendar
locale.setlocale(locale.LC_ALL, 'fr_FR')
assert calendar.month_name[1] == 'janvier'
assert calendar.month_abbr[1] == 'jan'
If you plan on using setlocale
in your code, make sure to read the tips and caveats and extension writer sections from the documentation. The example shown here is not representative of how it should be used. In particular, from these two sections:
It is generally a bad idea to call setlocale() in some library routine, since as a side effect it affects the entire program […]
Extension modules should never call setlocale() […]
You can try @Rule
annotation. Here is the example from the docs:
public static class UsesExternalResource {
Server myServer = new Server();
@Rule public ExternalResource resource = new ExternalResource() {
@Override
protected void before() throws Throwable {
myServer.connect();
};
@Override
protected void after() {
myServer.disconnect();
};
};
@Test public void testFoo() {
new Client().run(myServer);
}
}
You just need to create FileResource
class extending ExternalResource
.
Full Example
import static org.junit.Assert.*;
import org.junit.Rule;
import org.junit.Test;
import org.junit.rules.ExternalResource;
public class TestSomething
{
@Rule
public ResourceFile res = new ResourceFile("/res.txt");
@Test
public void test() throws Exception
{
assertTrue(res.getContent().length() > 0);
assertTrue(res.getFile().exists());
}
}
import java.io.BufferedReader;
import java.io.File;
import java.io.FileOutputStream;
import java.io.FileReader;
import java.io.IOException;
import java.io.InputStream;
import java.io.InputStreamReader;
import java.nio.charset.Charset;
import org.junit.rules.ExternalResource;
public class ResourceFile extends ExternalResource
{
String res;
File file = null;
InputStream stream;
public ResourceFile(String res)
{
this.res = res;
}
public File getFile() throws IOException
{
if (file == null)
{
createFile();
}
return file;
}
public InputStream getInputStream()
{
return stream;
}
public InputStream createInputStream()
{
return getClass().getResourceAsStream(res);
}
public String getContent() throws IOException
{
return getContent("utf-8");
}
public String getContent(String charSet) throws IOException
{
InputStreamReader reader = new InputStreamReader(createInputStream(),
Charset.forName(charSet));
char[] tmp = new char[4096];
StringBuilder b = new StringBuilder();
try
{
while (true)
{
int len = reader.read(tmp);
if (len < 0)
{
break;
}
b.append(tmp, 0, len);
}
reader.close();
}
finally
{
reader.close();
}
return b.toString();
}
@Override
protected void before() throws Throwable
{
super.before();
stream = getClass().getResourceAsStream(res);
}
@Override
protected void after()
{
try
{
stream.close();
}
catch (IOException e)
{
// ignore
}
if (file != null)
{
file.delete();
}
super.after();
}
private void createFile() throws IOException
{
file = new File(".",res);
InputStream stream = getClass().getResourceAsStream(res);
try
{
file.createNewFile();
FileOutputStream ostream = null;
try
{
ostream = new FileOutputStream(file);
byte[] buffer = new byte[4096];
while (true)
{
int len = stream.read(buffer);
if (len < 0)
{
break;
}
ostream.write(buffer, 0, len);
}
}
finally
{
if (ostream != null)
{
ostream.close();
}
}
}
finally
{
stream.close();
}
}
}
For a completely stateless utility class in Java, I suggest the class be declared public
and final
, and have a private constructor to prevent instantiation. The final
keyword prevents sub-classing and can improve efficiency at runtime.
The class should contain all static
methods and should not be declared abstract
(as that would imply the class is not concrete and has to be implemented in some way).
The class should be given a name that corresponds to its set of provided utilities (or "Util" if the class is to provide a wide range of uncategorized utilities).
The class should not contain a nested class unless the nested class is to be a utility class as well (though this practice is potentially complex and hurts readability).
Methods in the class should have appropriate names.
Methods only used by the class itself should be private.
The class should not have any non-final/non-static class fields.
The class can also be statically imported by other classes to improve code readability (this depends on the complexity of the project however).
Example:
public final class ExampleUtilities {
// Example Utility method
public static int foo(int i, int j) {
int val;
//Do stuff
return val;
}
// Example Utility method overloaded
public static float foo(float i, float j) {
float val;
//Do stuff
return val;
}
// Example Utility method calling private method
public static long bar(int p) {
return hid(p) * hid(p);
}
// Example private method
private static long hid(int i) {
return i * 2 + 1;
}
}
Perhaps most importantly of all, the documentation for each method should be precise and descriptive. Chances are methods from this class will be used very often and its good to have high quality documentation to complement the code.
Since Docker 1.5 you can now expose a range of ports to other linked containers using:
The Dockerfile EXPOSE command:
EXPOSE 7000-8000
or The Docker run command:
docker run --expose=7000-8000
Or instead you can publish a range of ports to the host machine via Docker run command:
docker run -p 7000-8000:7000-8000
You've almost done it. However setting flex: 0 0 <basis>
declaration to the columns would prevent them from growing/shrinking; And the <basis>
parameter would define the width of columns.
In addition, you could use CSS3 calc()
expression to specify the height
of columns with the respect to the height of the header.
#productShowcaseTitle {
flex: 0 0 100%; /* Let it fill the entire space horizontally */
height: 100px;
}
#productShowcaseDetail,
#productShowcaseThumbnailContainer {
height: calc(100% - 100px); /* excluding the height of the header */
}
#productShowcaseContainer {_x000D_
display: flex;_x000D_
flex-flow: row wrap;_x000D_
_x000D_
height: 600px;_x000D_
width: 580px;_x000D_
}_x000D_
_x000D_
#productShowcaseTitle {_x000D_
flex: 0 0 100%; /* Let it fill the entire space horizontally */_x000D_
height: 100px;_x000D_
background-color: silver;_x000D_
}_x000D_
_x000D_
#productShowcaseDetail {_x000D_
flex: 0 0 66%; /* ~ 2 * 33.33% */_x000D_
height: calc(100% - 100px); /* excluding the height of the header */_x000D_
background-color: lightgray;_x000D_
}_x000D_
_x000D_
#productShowcaseThumbnailContainer {_x000D_
flex: 0 0 34%; /* ~ 33.33% */_x000D_
height: calc(100% - 100px); /* excluding the height of the header */_x000D_
background-color: black;_x000D_
}
_x000D_
<div id="productShowcaseContainer">_x000D_
<div id="productShowcaseTitle"></div>_x000D_
<div id="productShowcaseDetail"></div>_x000D_
<div id="productShowcaseThumbnailContainer"></div>_x000D_
</div>
_x000D_
(Vendor prefixes omitted due to brevity)
Alternatively, if you could change your markup e.g. wrapping the columns by an additional <div>
element, it would be achieved without using calc()
as follows:
<div class="contentContainer"> <!-- Added wrapper -->
<div id="productShowcaseDetail"></div>
<div id="productShowcaseThumbnailContainer"></div>
</div>
#productShowcaseContainer {
display: flex;
flex-direction: column;
height: 600px; width: 580px;
}
.contentContainer { display: flex; flex: 1; }
#productShowcaseDetail { flex: 3; }
#productShowcaseThumbnailContainer { flex: 2; }
#productShowcaseContainer {_x000D_
display: flex;_x000D_
flex-direction: column;_x000D_
_x000D_
height: 600px;_x000D_
width: 580px;_x000D_
}_x000D_
_x000D_
.contentContainer {_x000D_
display: flex;_x000D_
flex: 1;_x000D_
}_x000D_
_x000D_
#productShowcaseTitle {_x000D_
height: 100px;_x000D_
background-color: silver;_x000D_
}_x000D_
_x000D_
#productShowcaseDetail {_x000D_
flex: 3;_x000D_
background-color: lightgray;_x000D_
}_x000D_
_x000D_
#productShowcaseThumbnailContainer {_x000D_
flex: 2;_x000D_
background-color: black;_x000D_
}
_x000D_
<div id="productShowcaseContainer">_x000D_
<div id="productShowcaseTitle"></div>_x000D_
_x000D_
<div class="contentContainer"> <!-- Added wrapper -->_x000D_
<div id="productShowcaseDetail"></div>_x000D_
<div id="productShowcaseThumbnailContainer"></div>_x000D_
</div>_x000D_
</div>
_x000D_
(Vendor prefixes omitted due to brevity)
We encountered this issue and discovered that the error was being thrown when using (IE in our case) the browser logged in as the process account, then changing the session log in through the application (SharePoint). I believe this scenario passes two authentication schemes:
The application hosted an *.asmx web service, that was being called on a load balanced server, initiating a web service call to itself using a WCF-like .NET3.5 binding.
Code that was used to call the web service:
public class WebServiceClient<T> : IDisposable
{
private readonly T _channel;
private readonly IClientChannel _clientChannel;
public WebServiceClient(string url)
: this(url, null)
{
}
/// <summary>
/// Use action to change some of the connection properties before creating the channel
/// </summary>
public WebServiceClient(string url,
Action<CustomBinding, HttpTransportBindingElement, EndpointAddress, ChannelFactory> init)
{
var binding = new CustomBinding();
binding.Elements.Add(
new TextMessageEncodingBindingElement(MessageVersion.Soap12, Encoding.UTF8));
var transport = url.StartsWith("https", StringComparison.InvariantCultureIgnoreCase)
? new HttpsTransportBindingElement()
: new HttpTransportBindingElement();
transport.AuthenticationScheme = System.Net.AuthenticationSchemes.Ntlm;
binding.Elements.Add(transport);
var address = new EndpointAddress(url);
var factory = new ChannelFactory<T>(binding, address);
factory.Credentials.Windows.AllowedImpersonationLevel = System.Security.Principal.TokenImpersonationLevel.Impersonation;
if (init != null)
{
init(binding, transport, address, factory);
}
this._clientChannel = (IClientChannel)factory.CreateChannel();
this._channel = (T)this._clientChannel;
}
/// <summary>
/// Use this property to call service methods
/// </summary>
public T Channel
{
get { return this._channel; }
}
/// <summary>
/// Use this porperty when working with
/// Session or Cookies
/// </summary>
public IClientChannel ClientChannel
{
get { return this._clientChannel; }
}
public void Dispose()
{
this._clientChannel.Dispose();
}
}
We discovered that if the session credential was the same as the browser's process account, then just NTLM was used and the call was successful. Otherwise it would result in this captured exception:
The HTTP request is unauthorized with client authentication scheme 'Ntlm'. The authentication header received from the server was 'Negotiate,NTLM'.
In the end, I am fairly certain that one of the authentication schemes would pass authentication while the other wouldn't, because it was not granted appropriate access.
I had this problem and it was because another script was deleting all of the tables and recreating them, but my table wasn't being recreated. I spent ages on this issue before I noticed that my table wasn't even visible on the page. Can you see your table before you initialize DataTables?
Essentially, the other script was doing:
let tables = $("table");
for (let i = 0; i < tables.length; i++) {
const table = tables[i];
if ($.fn.DataTable.isDataTable(table)) {
$(table).DataTable().destroy(remove);
$(table).empty();
}
}
And it should have been doing:
let tables = $("table.some-class-only");
... the rest ...
MongoDB needs data directory to store data.
Default path is /data/db
When you start MongoDB engine, it searches this directory which is missing in your case. Solution is create this directory and assign rwx
permission to user.
If you want to change the path of your data directory then you should specify it while starting mongod server like,
mongod --dbpath /data/<path> --port <port no>
This should help you start your mongod server with custom path and port.
Yes, a UITextView is what you're looking for. You'll have to deal with some things differently (like the return key) but you can add text to it, and it will allow you to scroll up and down if there's too much text inside.
This link has info about making a screen to enter data:
Bar
is guaranteed not to change the object it is being invoked on. See the section about const correctness in the C++ FAQ, for example.
Go to Menu-Tab -> Project -> Build -> Automatically(check this option). and than reopen a new project.
Here is a working example. I changed the code to output to a div instead of an alert box. Your issue was item.innerHTML
I believe. I use the jQuery html
function instead and that seemed to resolve the issue.
<table id='thisTable' class='disptable' style='margin-left:auto;margin-right:auto;' >
<tr>
<th>Fund</th>
<th>Organization</th>
<th>Access</th>
<th>Delete</th>
</tr>
<tr>
<td class='fund'>100000</td><td class='org'>10110</td><td>OWNED</td><td><a class='delbtn'ref='#'>X</a></td></tr>
<tr><td class='fund'>100000</td><td class='org'>67130</td><td>OWNED</td><td><a class='delbtn' href='#'>X</a></td></tr>
<tr><td class='fund'>170252</td><td class='org'>67130</td><td>OWNED</td><td><a class='delbtn' href='#'>X</a></td></tr>
<tr><td class='fund'>100000</td><td class='org'>67150</td><td>PENDING ACCESS</td><td><a class='delbtn' href='#'>X</a></td></tr>
<tr><td class='fund'>100000</td><td class='org'>67120</td><td>PENDING ACCESS</td><td><a class='delbtn' href='#'>X</a>
</td>
</tr>
</table>
<div id="output"></div>?
the javascript:
$('#thisTable tr').on('click', function(event) {
var tds = $(this).addClass('row-highlight').find('td');
var values = '';
tds.each(function(index, item) {
values = values + 'td' + (index + 1) + ':' + $(item).html() + '<br/>';
});
$("#output").html(values);
});
You can use MySQL DATE
function like below
For instance, if you want results between 2017-09-05 till 2017-09-09
SELECT DATE(timestamp_field) as date FROM stocks_annc WHERE DATE(timestamp_field) >= '2017-09-05' AND DATE(timestamp_field) <= '2017-09-09'
Make sure to wrap the dates within single quotation ''
Hope this helps.
You can't import classes from the default package. You should avoid using the default package except for very small example programs.
From the Java language specification:
It is a compile time error to import a type from the unnamed package.
Returns true if comes 'y', '1', 'true', 'on'or whatever you add in similar way
boolean getValue(String value) {
return ("Y".equals(value.toUpperCase())
|| "1".equals(value.toUpperCase())
|| "TRUE".equals(value.toUpperCase())
|| "ON".equals(value.toUpperCase())
);
}
Declare PtrSafe Function URLDownloadToFile Lib "urlmon" Alias "URLDownloadToFileA" _
(ByVal pCaller As Long, ByVal szURL As String, ByVal szFileName As String, _
ByVal dwReserved As Long, ByVal lpfnCB As Long) As Long
Sub Example()
DownloadFile$ = "someFile.ext" 'here the name with extension
URL$ = "http://some.web.address/" & DownloadFile 'Here is the web address
LocalFilename$ = "C:\Some\Path" & DownloadFile !OR! CurrentProject.Path & "\" & DownloadFile 'here the drive and download directory
MsgBox "Download Status : " & URLDownloadToFile(0, URL, LocalFilename, 0, 0) = 0
End Sub
I found the above when looking for downloading from FTP with username and address in URL. Users supply information and then make the calls.
This was helpful because our organization has Kaspersky AV which blocks active
FTP.exe, but not web connections. We were unable to develop in house with ftp.exe and this was our solution. Hope this helps other looking for info!
Use this:
<android.support.design.widget.TabLayout
android:id="@+id/patienthomescreen_tabs"
android:layout_width="match_parent"
android:layout_height="72sp"
app:tabGravity="fill"
app:tabMode="fixed"
app:tabIndicatorColor="@android:color/white"
app:tabSelectedTextColor="@color/green"/>
After in OnClickListener:
TabLayout tabLayout = (TabLayout) findViewById(R.id.patienthomescreen_tabs);
TabLayout.Tab tab = tabLayout.getTabAt(someIndex);
tab.select();
you need RequestOptions
let headers = new Headers({'Content-Type': 'application/json'});
headers.append('Authorization','Bearer ')
let options = new RequestOptions({headers: headers});
return this.http.post(APIname,body,options)
.map(this.extractData)
.catch(this.handleError);
for more check this link
var el = document.querySelector("yourElement");
window.scroll({top: el.offsetTop, behavior: 'smooth'});
I've tried to add style="width: auto !important"
and works great for me!
If you are still interested in a javascript api to select both date and time data, have a look at these projects which are forks of bootstrap datepicker:
The first fork is a big refactor on the parsing/formatting codebase and besides providing all views to select date/time using mouse/touch, it also has a mask option (by default) which lets the user to quickly type the date/time based on a pre-specified format.
I use XSD
in a batch script to generate .xsd
file and classes from XML
directly :
set XmlFilename=Your__Xml__Here
set WorkingFolder=Your__Xml__Path_Here
set XmlExtension=.xml
set XsdExtension=.xsd
set XSD="C:\Program Files (x86)\Microsoft SDKs\Windows\v8.1A\bin\NETFX 4.5.1\Tools\xsd.exe"
set XmlFilePath=%WorkingFolder%%XmlFilename%%XmlExtension%
set XsdFilePath=%WorkingFolder%%XmlFilename%%XsdExtension%
%XSD% %XmlFilePath% /out:%WorkingFolder%
%XSD% %XsdFilePath% /c /out:%WorkingFolder%
You get a recursion error because your attempt to access the self.__dict__
attribute inside __getattribute__
invokes your __getattribute__
again. If you use object
's __getattribute__
instead, it works:
class D(object):
def __init__(self):
self.test=20
self.test2=21
def __getattribute__(self,name):
if name=='test':
return 0.
else:
return object.__getattribute__(self, name)
This works because object
(in this example) is the base class. By calling the base version of __getattribute__
you avoid the recursive hell you were in before.
Ipython output with code in foo.py:
In [1]: from foo import *
In [2]: d = D()
In [3]: d.test
Out[3]: 0.0
In [4]: d.test2
Out[4]: 21
Update:
There's something in the section titled More attribute access for new-style classes in the current documentation, where they recommend doing exactly this to avoid the infinite recursion.
Also, to note - the Active Record Class also has a $this->db->where_in()
method.
See the manual on Type Juggling on possible casts.
The casts allowed are:
You would have to write a Mapper that does the casting from stdClass to another concrete class. Shouldn't be too hard to do.
Or, if you are in a hackish mood, you could adapt the following code:
function arrayToObject(array $array, $className) {
return unserialize(sprintf(
'O:%d:"%s"%s',
strlen($className),
$className,
strstr(serialize($array), ':')
));
}
which pseudocasts an array to an object of a certain class. This works by first serializing the array and then changing the serialized data so that it represents a certain class. The result is unserialized to an instance of this class then. But like I said, it's hackish, so expect side-effects.
For object to object, the code would be
function objectToObject($instance, $className) {
return unserialize(sprintf(
'O:%d:"%s"%s',
strlen($className),
$className,
strstr(strstr(serialize($instance), '"'), ':')
));
}
This can be done using the numeric_limits in C++:
http://www.cplusplus.com/reference/limits/numeric_limits/
These are the methods you probably want to look at:
infinity() T Representation of positive infinity, if available.
quiet_NaN() T Representation of quiet (non-signaling) "Not-a-Number", if available.
signaling_NaN() T Representation of signaling "Not-a-Number", if available.
Set password that satisfies 7 MySql validation rules
eg:- d_VX>N("xn_BrD2y
Making validation criteria bit more simple will solve the issue
SET GLOBAL validate_password_length = 6;
SET GLOBAL validate_password_number_count = 0;
But recommended a Strong password is a correct solution
[v[0] for v in sorted(foo.items(), key=lambda(k,v): (v,k))]
If you want to take advantage of the 60FPS smoothness that the "transform" property offers, you can combine the two:
@keyframes changewidth {
from {
transform: scaleX(1);
}
to {
transform: scaleX(2);
}
}
div {
animation-duration: 0.1s;
animation-name: changewidth;
animation-iteration-count: infinite;
animation-direction: alternate;
}
More explanation on why transform offers smoother transitions here: https://medium.com/outsystems-experts/how-to-achieve-60-fps-animations-with-css3-db7b98610108
$mylabel.text( $mylabel.text().replace('-', '') );
Since text()
gets the value, and text( "someValue" )
sets the value, you just place one inside the other.
Would be the equivalent of doing:
var newValue = $mylabel.text().replace('-', '');
$mylabel.text( newValue );
EDIT:
I hope I understood the question correctly. I'm assuming $mylabel
is referencing a DOM element in a jQuery object, and the string is in the content of the element.
If the string is in some other variable not part of the DOM, then you would likely want to call the .replace()
function against that variable before you insert it into the DOM.
Like this:
var someVariable = "-123456";
$mylabel.text( someVariable.replace('-', '') );
or a more verbose version:
var someVariable = "-123456";
someVariable = someVariable.replace('-', '');
$mylabel.text( someVariable );
The most possible reason for it not to find the file is the path having spaces in. For example, it won't find "explorer /select,c:\space space\space.txt".
Just add double quotes before and after the path, like;
explorer /select,"c:\space space\space.txt"
or do the same in C# with
System.Diagnostics.Process.Start("explorer.exe","/select,\"c:\space space\space.txt\"");
<!DOCTYPE html>
<html>
<head></head>
<body>
<div style=" background-color: #00000088"> Hi there </div>
<!-- #00 would be r, 00 would be g, 00 would be b, 88 would be a. -->
</body>
</html>
including 4 sets of numbers would make it rgba, not cmyk, but either way would work (rgba= 00000088, cmyk= 0%, 0%, 0%, 50%)
I don't have the reputation for commenting on the first answer but wanted to add that I have added unit tests for the winning answer and have the following observations:
@FieldMatch(first="invalidFieldName1", second="validFieldName2")
private String stringField = "1";
private Integer integerField = new Integer(1)
private int intField = 1;
<div style="clear:both;"></div>
- may do the trick in some cases; not a "colspan" but may help achieve what you are looking for...
<div id="table">
<div class="table_row">
<div class="table_cell1"></div>
<div class="table_cell2"></div>
<div class="table_cell3"></div>
</div>
<div class="table_row">
<div class="table_cell1"></div>
<div class="table_cell2"></div>
<div class="table_cell3"></div>
</div>
<!-- clear:both will clear any float direction to default, and
prevent the previously defined floats from affecting other elements -->
<div style="clear:both;"></div>
<div class="table_row">
<!-- the float is cleared, you could have 4 divs (columns) or
just one with 100% width -->
<div class="table_cell123"></div>
</div>
</div>
Just use:
.getClass().getSimpleName();
Example:
StringBuilder randSB = new StringBuilder("just a String");
System.out.println(randSB.getClass().getSimpleName());
Output:
StringBuilder
sudo setfacl -m u:$USER:rwx /dev/kvm
Worked for me.
You may not have permission to dba_sequences. So you can always just do:
select * from user_sequences;
One approach is to strip object and functions from main object. And stringify the simpler form
function simpleStringify (object){
var simpleObject = {};
for (var prop in object ){
if (!object.hasOwnProperty(prop)){
continue;
}
if (typeof(object[prop]) == 'object'){
continue;
}
if (typeof(object[prop]) == 'function'){
continue;
}
simpleObject[prop] = object[prop];
}
return JSON.stringify(simpleObject); // returns cleaned up JSON
};
Simply by iterating over the list:
struct node *n = head;
while(n){
struct node *n1 = n;
n = n->next;
free(n1);
}
The proposed solutions I found so far do not cover more complex scenarios.
I needed to convert a query string like
https://random.url.com?Target=Offer&Method=findAll&filters%5Bhas_goals_enabled%5D%5BTRUE%5D=1&filters%5Bstatus%5D=active&fields%5B%5D=id&fields%5B%5D=name&fields%5B%5D=default_goal_name
into an object like:
{
"Target": "Offer",
"Method": "findAll",
"fields": [
"id",
"name",
"default_goal_name"
],
"filters": {
"has_goals_enabled": {
"TRUE": "1"
},
"status": "active"
}
}
OR:
https://random.url.com?Target=Report&Method=getStats&fields%5B%5D=Offer.name&fields%5B%5D=Advertiser.company&fields%5B%5D=Stat.clicks&fields%5B%5D=Stat.conversions&fields%5B%5D=Stat.cpa&fields%5B%5D=Stat.payout&fields%5B%5D=Stat.date&fields%5B%5D=Stat.offer_id&fields%5B%5D=Affiliate.company&groups%5B%5D=Stat.offer_id&groups%5B%5D=Stat.date&filters%5BStat.affiliate_id%5D%5Bconditional%5D=EQUAL_TO&filters%5BStat.affiliate_id%5D%5Bvalues%5D=1831&limit=9999
INTO:
{
"Target": "Report",
"Method": "getStats",
"fields": [
"Offer.name",
"Advertiser.company",
"Stat.clicks",
"Stat.conversions",
"Stat.cpa",
"Stat.payout",
"Stat.date",
"Stat.offer_id",
"Affiliate.company"
],
"groups": [
"Stat.offer_id",
"Stat.date"
],
"limit": "9999",
"filters": {
"Stat.affiliate_id": {
"conditional": "EQUAL_TO",
"values": "1831"
}
}
}
CODE:
var getParamsAsObject = function (query) {
query = query.substring(query.indexOf('?') + 1);
var re = /([^&=]+)=?([^&]*)/g;
var decodeRE = /\+/g;
var decode = function (str) {
return decodeURIComponent(str.replace(decodeRE, " "));
};
var params = {}, e;
while (e = re.exec(query)) {
var k = decode(e[1]), v = decode(e[2]);
if (k.substring(k.length - 2) === '[]') {
k = k.substring(0, k.length - 2);
(params[k] || (params[k] = [])).push(v);
}
else params[k] = v;
}
var assign = function (obj, keyPath, value) {
var lastKeyIndex = keyPath.length - 1;
for (var i = 0; i < lastKeyIndex; ++i) {
var key = keyPath[i];
if (!(key in obj))
obj[key] = {}
obj = obj[key];
}
obj[keyPath[lastKeyIndex]] = value;
}
for (var prop in params) {
var structure = prop.split('[');
if (structure.length > 1) {
var levels = [];
structure.forEach(function (item, i) {
var key = item.replace(/[?[\]\\ ]/g, '');
levels.push(key);
});
assign(params, levels, params[prop]);
delete(params[prop]);
}
}
return params;
};
Try it: tableView.reloadSections(IndexSet(integersIn: 0...0), with: .automatic) It helped me
[Update:] As the comments below point out, newer MS GUIDs are V4 and do not use the MAC address as part of the GUID generation (I haven't seen any indication of a V5 implementation from MS though, so if anyone has a link confirming that let me know). WIth V4 though, time is still a factor though, and the odds against duplication of GUIDs remains so small as to be irrelevant for any practical usage. You certainly would not be likely to ever generate a duplicate GUID from just a single system test such as the OP was trying to do.
Most of these answers are missing one vital point about Microsoft's GUID implementation. The first part of the GUID is based on a timestamp and another part is based on the MAC address of the network card (or a random number if no NIC is installed).
If I understand this correctly, it means that the only reliable way to duplicate a GUID would be to run simultainous GUID generations on multiple machines where the MAC addresses were the same AND where the clocks on both systems were at the same exact time when the generation occured (the timestamp is based on milliseconds if I understand it correctly).... even then there are a lot of other bits in the number that are random, so the odds are still vanishingly small.
For all practical purposes the GUIDs are universally unique.
There is a pretty good description of the MS GUID over at "The Old New Thing" blog
use this polyfill https://github.com/UziTech/js-date-format
var d = new Date("1/1/2014 10:00 am");
d.format("DDDD 'the' DS 'of' MMMM YYYY h:mm TT");
//output: Wednesday the 1st of January 2014 10:00 AM
The feature you are after is called Wildcard Subdomains. It allows you not have to setup DNS for each subdomain, and instead use apache rewrites for the redirection. You can find a nice tutorial here, but there are thousands of tutorials out there. Here is the necessary code from that tutorial:
<VirtualHost 111.22.33.55>
DocumentRoot /www/subdomain
ServerName www.domain.tld
ServerAlias *.domain.tld
</VirtualHost>
However as it required the use of VirtualHosts it must be set in the server's httpd.conf file, instead of a local .htaccess.
You can also use a nested for
loop like shown below
n = 3
arr = []
for x in range(n):
arr.append([])
for y in range(n):
arr[x].append([])
for z in range(n):
arr[x][y].append(0)
print(arr)
Try
String regex = "[0-9]+";
or
String regex = "\\d+";
As per Java regular expressions, the +
means "one or more times" and \d
means "a digit".
Note: the "double backslash" is an escape sequence to get a single backslash - therefore, \\d
in a java String gives you the actual result: \d
References:
Edit: due to some confusion in other answers, I am writing a test case and will explain some more things in detail.
Firstly, if you are in doubt about the correctness of this solution (or others), please run this test case:
String regex = "\\d+";
// positive test cases, should all be "true"
System.out.println("1".matches(regex));
System.out.println("12345".matches(regex));
System.out.println("123456789".matches(regex));
// negative test cases, should all be "false"
System.out.println("".matches(regex));
System.out.println("foo".matches(regex));
System.out.println("aa123bb".matches(regex));
Isn't it necessary to add
^
and$
to the regex, so it won't match "aa123bb" ?
No. In java, the matches
method (which was specified in the question) matches a complete string, not fragments. In other words, it is not necessary to use ^\\d+$
(even though it is also correct). Please see the last negative test case.
Please note that if you use an online "regex checker" then this may behave differently. To match fragments of a string in Java, you can use the find
method instead, described in detail here:
Difference between matches() and find() in Java Regex
Won't this regex also match the empty string,
""
?*
No. A regex \\d*
would match the empty string, but \\d+
does not. The star *
means zero or more, whereas the plus +
means one or more. Please see the first negative test case.
Isn't it faster to compile a regex Pattern?
Yes. It is indeed faster to compile a regex Pattern once, rather than on every invocation of matches
, and so if performance implications are important then a Pattern
can be compiled and used like this:
Pattern pattern = Pattern.compile(regex);
System.out.println(pattern.matcher("1").matches());
System.out.println(pattern.matcher("12345").matches());
System.out.println(pattern.matcher("123456789").matches());
Of course it would be more simple if you extend jQuery like this:
$.fn.addClassDelay = function(className,delay) {
var $addClassDelayElement = $(this), $addClassName = className;
$addClassDelayElement.addClass($addClassName);
setTimeout(function(){
$addClassDelayElement.removeClass($addClassName);
},delay);
};
after that you can use this function like addClass:
$('div').addClassDelay('clicked',1000);
If the other solutions don't work for you, try this:
Step 1: (if your installation is in webroot)
Replace
#RewriteBase /magento/
with
RewriteBase /
Step 2:
Add following lines (inclusive exclude admin because backend needs index.php internally)
RewriteCond %{THE_REQUEST} ^.*/index.php
RewriteRule ^(.*)index.php$ http://www.yourdomain.com/$1 [R=301,L]
RewriteRule ^index.php/(admin|user)($|/) - [L]
RewriteRule ^index.php/(.*) $1 [R=301,QSA,L]
right after
RewriteRule .* index.php [L]
This works for me
In case it is still not working, double check Magento configuration: System->Configuration->Web->Search Engine Optimization. Rewrites must be enabled.
Copied from Web Applications:
=QUERY(Responses!B1:I, "Select B where G contains '"&$B1&"'")