If any one having this issue in flutter after adding firebase storage. Do flutter clean and re run it, it will work

Faced the same Issue in MI devices and figured out the problem by following these Steps :

1) Go to Setting

2) Click on Additional Settings

3) Click on Developer Options

4) Click toggle of Install via USB to enable it

and the issue will be resolved.

clear project and then run. it will work

I was also stuck by this problem.But in my case I delete all .png images from drawable folder ,clean and rebuild application and then paste all .png images to my drawable, rebuild again. It worked fine for me.

Using some ES6 / ES2015:

If you don't like to create an extra function and remove the items 'inline'.

Object.keys(obj).forEach(k => (!obj[k] && obj[k] !== undefined) && delete obj[k]);

jsbin

Same, written as a function.

const removeEmpty = (obj) => {
  Object.keys(obj).forEach((k) => (!obj[k] && obj[k] !== undefined) && delete obj[k]);
  return obj;
};

jsbin

This function uses recursion to delete items from nested objects as well:

const removeEmpty = (obj) => {
  Object.keys(obj).forEach(k =>
    (obj[k] && typeof obj[k] === 'object') && removeEmpty(obj[k]) ||
    (!obj[k] && obj[k] !== undefined) && delete obj[k]
  );
  return obj;
};

jsbin

Same as function before but with ES7 / 2016 Object.entries:

const removeEmpty = (obj) => {
  Object.entries(obj).forEach(([key, val])  =>
    (val && typeof val === 'object') && removeEmpty(val) ||
    (val === null || val === "") && delete obj[key]
  );
  return obj;
};

Same as third example but in plain ES5:

function removeEmpty(obj) {
  Object.keys(obj).forEach(function(key) {
    (obj[key] && typeof obj[key] === 'object') && removeEmpty(obj[key]) ||
    (obj[key] === '' || obj[key] === null) && delete obj[key]
  });
  return obj;
};

jsbin

Numpty here used SQL authentication

instead of Windows (correct)

when adding the login to SQL Server, which also gives you this error if you are using Windows auth.

As mentioned in the comments to the question, the JDBC-ODBC Bridge is - as the name indicates - only a mechanism for the JDBC layer to "talk to" the ODBC layer. Even if you had a JDBC-ODBC Bridge on your Mac you would also need to have

• an implementation of ODBC itself, and
• an appropriate ODBC driver for the target database (ACE/Jet, a.k.a. "Access")

So, for most people, using JDBC-ODBC Bridge technology to manipulate ACE/Jet ("Access") databases is really a practical option only under Windows. It is also important to note that the JDBC-ODBC Bridge will be has been removed in Java 8 (ref: here).

There are other ways of manipulating ACE/Jet databases from Java, such as UCanAccess and Jackcess. Both of these are pure Java implementations so they work on non-Windows platforms. For details on how to use UCanAccess see

Manipulating an Access database from Java without ODBC

Data content is so variable, I think the best form is to define it as "ObjectNode" and next create his own class to parse:

Finally:

private ObjectNode data;

I experienced the same issue, it was related to security not being granted to part of the tables. review your user has access to the databases/ tables/views/functions etc used by the report.

In my case, I had to set the MultipleActiveResultSets to True in the connection string.
Then it appeared another error (the real one) about not being able to run 2 (SQL) commands at the same time over the same data context! (EF Core, Code first)
So the solution for me was to look for any other asynchronous command execution and turn them to synchronous, as I had just one DbContext for both commands.

I hope it helps you

Another way to encounter this error is from a dataset with unnamed columns. The error is thrown when the dataset is serialized into JSON.

This statement will result in error:

select @column1, @column2

Adding column names will prevent the error:

select @column1 as col1, @column2 as col2

As m.edmondson mentioned, "The remote host closed the connection." occurs when a user or browser cancels something, or the network connection drops etc. It doesn't necessarily have to be a file download however, just any request for any resource that results in a response to the client. Basically the error means that the response could not be sent because the server can no longer talk to the client(browser).

There are a number of steps that you can take in order to stop it happening. If you are manually sending something in the response with a Response.Write, Response.Flush, returning data from a web servivce/page method or something similar, then you should consider checking Response.IsClientConnected before sending the response. Also, if the response is likely to take a long time or a lot of server-side processing is required, you should check this periodically until the response.end if called. See the following for details on this property:

http://msdn.microsoft.com/en-us/library/system.web.httpresponse.isclientconnected.aspx

Alternatively, which I believe is most likely in your case, the error is being caused by something inside the framework. The following link may by of use:

http://blog.whitesites.com/fixing-The-remote-host-closed-the-connection-The-error-code-is-0x80070057__633882307305519259_blog.htm

The following stack-overflow post might also be of interest:

"The remote host closed the connection" in Response.OutputStream.Write

Using John W answer I created an implementation that correctly begin the timeout when the task starts its execution. I even write a unit test for it :)

However, it does not suit my needs since some IO operations do not interrupt when Future.cancel() is called (ie when Thread.interrupt() is called). Some examples of IO operation that may not be interrupted when Thread.interrupt() is called are Socket.connect and Socket.read (and I suspect most of IO operation implemented in java.io). All IO operations in java.nio should be interruptible when Thread.interrupt() is called. For example, that is the case for SocketChannel.open and SocketChannel.read.

Anyway if anyone is interested, I created a gist for a thread pool executor that allows tasks to timeout (if they are using interruptible operations...): https://gist.github.com/amanteaux/64c54a913c1ae34ad7b86db109cbc0bf

Just to add to the responses above. I had this same issue when i first started using ASP.Net MVC and i was doing a Response.Redirect during a controller action:

Response.Redirect("/blah", true);

Instead of returning a Response.Redirect action i should have been returning a RedirectAction:

return Redirect("/blah");

From the docs:

Note: When actions are enclosed in tasks (such as FutureTask) either explicitly or via methods such as submit, these task objects catch and maintain computational exceptions, and so they do not cause abrupt termination, and the internal exceptions are not passed to this method.

When you submit a Runnable, it'll get wrapped in a Future.

Your afterExecute should be something like this:

public final class ExtendedExecutor extends ThreadPoolExecutor {

    // ...

    protected void afterExecute(Runnable r, Throwable t) {
        super.afterExecute(r, t);
        if (t == null && r instanceof Future<?>) {
            try {
                Future<?> future = (Future<?>) r;
                if (future.isDone()) {
                    future.get();
                }
            } catch (CancellationException ce) {
                t = ce;
            } catch (ExecutionException ee) {
                t = ee.getCause();
            } catch (InterruptedException ie) {
                Thread.currentThread().interrupt();
            }
        }
        if (t != null) {
            System.out.println(t);
        }
    }
}

Check the Initial Catalog parameter in your connection string. It may be that your code is looking in the wrong database for the Projects object.

For example, if you have database syncing setup in such a way that only a subset of the master-database's tables are transferred, you can encounter this error if Linq to SQL is expecting all tables to be in the database pointed to by the connection string.

To have a cron executed on Sunday you can use either of these:

5 8 * * 0
5 8 * * 7
5 8 * * Sun

Where 5 8 stands for the time of the day when this will happen: 8:05.

In general, if you want to execute something on Sunday, just make sure the 5th column contains either of 0, 7 or Sun. You had 6, so it was running on Saturday.

The format for cronjobs is:

 +---------------- minute (0 - 59)
 |  +------------- hour (0 - 23)
 |  |  +---------- day of month (1 - 31)
 |  |  |  +------- month (1 - 12)
 |  |  |  |  +---- day of week (0 - 6) (Sunday=0 or 7)
 |  |  |  |  |
 *  *  *  *  *  command to be executed

You can always use crontab.guru as a editor to check your cron expressions.

Try adding:

<script src="https://ajax.googleapis.com/ajax/libs/angularjs/1.2.7/angular-resource.min.js">

and:

angular.module('MyApp', ['ngRoute','ngResource']);
function TwitterCtrl($scope,$resource){
}

You should call angular.module only once with all dependencies because with your current code, you're creating a new MyApp module overwriting the previous one.

From angular documentation:

Beware that using angular.module('myModule', []) will create the module myModule and overwrite any existing module named myModule. Use angular.module('myModule') to retrieve an existing module.

I am trying to obtain a handle on one of the views in the Action Bar

I will assume that you mean something established via android:actionLayout in your <item> element of your <menu> resource.

I have tried calling findViewById(R.id.menu_item)

To retrieve the View associated with your android:actionLayout, call findItem() on the Menu to retrieve the MenuItem, then call getActionView() on the MenuItem. This can be done any time after you have inflated the menu resource.

In Boto3, if you're checking for either a folder (prefix) or a file using list_objects. You can use the existence of 'Contents' in the response dict as a check for whether the object exists. It's another way to avoid the try/except catches as @EvilPuppetMaster suggests

import boto3
client = boto3.client('s3')
results = client.list_objects(Bucket='my-bucket', Prefix='dootdoot.jpg')
return 'Contents' in results

Ivo nailed it, but I'll mention that there is one dirty trick you can use, though I don't recommend it if you're going for style points: You can embed JavaScript code directly in your CoffeeScript by escaping it with backticks.

However, here's why this is usually a bad idea: The CoffeeScript compiler is unaware of those variables, which means they won't obey normal CoffeeScript scoping rules. So,

`foo = 'bar'`
foo = 'something else'

compiles to

foo = 'bar';
var foo = 'something else';

and now you've got yourself two foos in different scopes. There's no way to modify the global foo from CoffeeScript code without referencing the global object, as Ivy described.

Of course, this is only a problem if you make an assignment to foo in CoffeeScript—if foo became read-only after being given its initial value (i.e. it's a global constant), then the embedded JavaScript solution approach might be kinda sorta acceptable (though still not recommended).

Arduino sketches are written in C++.

Here is a typical construct you'll encounter:

LiquidCrystal lcd(12, 11, 5, 4, 3, 2);
...
lcd.begin(16, 2);
lcd.print("Hello, World!");

That's C++, not C.

Hence do yourself a favor and learn C++. There are plenty of books and online resources available.

Assuming that obj is a pre-constructed object (and not a JSON string), you can achieve this with the following:

Object.keys(obj).forEach(function(key){
   console.log(key + '=' + obj[key]);
});

We can add all the files and exclude the file which has to be removed by git reset.

git add .
git reset -- <file_name_to_exclude>

<script>var myVar = 15;</script>
<input id="EditBanner" type="button" value="Edit Image" onclick="EditBanner(myVar);"/>

The DELIMITER statement changes the standard delimiter which is semicolon ( ;) to another. The delimiter is changed from the semicolon( ;) to double-slashes //.

Why do we have to change the delimiter?

Because we want to pass the stored procedure, custom functions etc. to the server as a whole rather than letting mysql tool to interpret each statement at a time.

This is an older question, and there are many different ways to do this. The most complete answer, IMHO, is found here: https://gist.github.com/vielhuber/f2c6bdd1ed9024023fe4 . (Pasting and formatting the code here didn't work for me)

If you want to pause then use java.util.concurrent.TimeUnit:

TimeUnit.SECONDS.sleep(1);

To sleep for one second or

TimeUnit.MINUTES.sleep(1);

To sleep for a minute.

As this is a loop, this presents an inherent problem - drift. Every time you run code and then sleep you will be drifting a little bit from running, say, every second. If this is an issue then don't use sleep.

Further, sleep isn't very flexible when it comes to control.

For running a task every second or at a one second delay I would strongly recommend a ScheduledExecutorService and either scheduleAtFixedRate or scheduleWithFixedDelay.

For example, to run the method myTask every second (Java 8):

public static void main(String[] args) {
    final ScheduledExecutorService executorService = Executors.newSingleThreadScheduledExecutor();
    executorService.scheduleAtFixedRate(App::myTask, 0, 1, TimeUnit.SECONDS);
}

private static void myTask() {
    System.out.println("Running");
}

And in Java 7:

public static void main(String[] args) {
    final ScheduledExecutorService executorService = Executors.newSingleThreadScheduledExecutor();
    executorService.scheduleAtFixedRate(new Runnable() {
        @Override
        public void run() {
            myTask();
        }
    }, 0, 1, TimeUnit.SECONDS);
}

private static void myTask() {
    System.out.println("Running");
}

Just remember to fix multiple CSS inclusions in a bundle such as:

bundles.Add(new StyleBundle("~/Content/styles/jquery-ui")
    .Include("~/Content/css/path1/somestyle1.css", "~/Content/css/path2/somestyle2.css"));

You cannot just add new CssRewriteUrlTransform() to the end as you can with one CSS file as the method does not support it, so you have to use Include multiple times:

bundles.Add(new StyleBundle("~/Content/styles/jquery-ui")
    .Include("~/Content/css/path1/somestyle1.css", new CssRewriteUrlTransform())
    .Include("~/Content/css/path2/somestyle2.css", new CssRewriteUrlTransform()));

To better understand the volume instruction in dockerfile, let us learn the typical volume usage in mysql official docker file implementation.

VOLUME /var/lib/mysql

Reference: https://github.com/docker-library/mysql/blob/3362baccb4352bcf0022014f67c1ec7e6808b8c5/8.0/Dockerfile

The /var/lib/mysql is the default location of MySQL that store data files.

When you run test container for test purpose only, you may not specify its mounting point,e.g.

docker run mysql:8

then the mysql container instance will use the default mount path which is specified by the volume instruction in dockerfile. the volumes is created with a very long ID-like name inside the Docker root, this is called "unnamed" or "anonymous" volume. In the folder of underlying host system /var/lib/docker/volumes.

/var/lib/docker/volumes/320752e0e70d1590e905b02d484c22689e69adcbd764a69e39b17bc330b984e4

This is very convenient for quick test purposes without the need to specify the mounting point, but still can get best performance by using Volume for data store, not the container layer.

For a formal use, you will need to specify the mount path by using named volume or bind mount, e.g.

docker run  -v /my/own/datadir:/var/lib/mysql mysql:8

The command mounts the /my/own/datadir directory from the underlying host system as /var/lib/mysql inside the container.The data directory /my/own/datadir won't be automatically deleted, even the container is deleted.

Usage of the mysql official image (Please check the "Where to Store Data" section):

Reference: https://hub.docker.com/_/mysql/

If the interface works the way it did last I used it, you can select the region in Excel, copy it, open SQL Server and paste the data into the table as you would with Access.

Or you could setup an ODBC link between Excel and SQL Server.

Try something like the following if you want to use pure JavaScript:

document.getElementsByName('link')[0].placeholder='Type here to search';

Having done some more digging, I think my issue is something to do with the type of library I am building gtest into. When building gtest with CMake, if BUILD_SHARED_LIBS is un-checked, and I link my program against these .lib files I get the errors mentioned above. However, if BUILD_SHARED_LIBS is checked then I produce a set of .lib and .dll files. When now linking against these .lib files the program compiles, but when run complains that it can't find gtest.dll.

That is because you have to add -DGTEST_LINKED_AS_SHARED_LIBRARY=1 to compiler definitions in your project if you want to use gtest as a shared library.

You could also use the static libraries, provided you compiled it with gtest_force_shared_crt option on to eliminate errors you have seen.

I like the library but adding it to the project is a real pain. And you have no chance to do it right unless you dig (and hack) into the gtest cmake files. Shame. In particular I do not like the idea of adding gtest as a source. :)

Since WP 2.6.0 you can use plugins_url() method.

You formaction for multiple submit button in one form example

 <input type="submit" name="" class="btn action_bg btn-sm loadGif" value="Add Address" title="" formaction="/addAddress"> 
 <input type="submit" name="" class="btn action_bg btn-sm loadGif" value="update Address" title="" formaction="/updateAddress"> 

    def giveText(num):
    pairs={1:'one',2:'two',3:'three',4:'four',5:'five',6:'six',7:'seven',8:'eight',9:'nine',10:'ten',
    11:'eleven',12:'twelve',13:'thirteen',14:'fourteen',15:'fifteen',16:'sixteen',17:'seventeen',18:'eighteen',19:'nineteen',20:'twenty',
    30:'thirty',40:'fourty',50:'fifty',60:'sixty',70:'seventy',80:'eighty',90:'ninety',0:''} # this and above 2 lines are actually single line
    return pairs[num]

def toText(num,unit):
    n=int(num)# this line can be removed
    ans=""
    if n <=20:
        ans= giveText(n)
    else:
        ans= giveText(n-(n%10))+" "+giveText((n%10))
    ans=ans.strip()
    if len(ans)>0:
        return " "+ans+" "+unit
    else:
        return " "

num="99,99,99,999"# use raw_input()
num=num.replace(",","")# to remove ','
try:
    num=str(int(num)) # to check valid number
except:
    print "Invalid"
    exit()

while len(num)<9: # i want fix length so no need to check it again
    num="0"+num

ans=toText( num[0:2],"Crore")+toText(num[2:4],"Lakh")+toText(num[4:6],"Thousand")+toText(num[6:7],"Hundred")+toText(num[7:9],"")
print ans.strip()

colon is using in for-each loop, Try this example,

import java.util.*;

class ForEachLoop
{
       public static void main(String args[])
       {`enter code here`
       Integer[] iray={1,2,3,4,5};
       String[] sray={"ENRIQUE IGLESIAS"};
       printME(iray);
       printME(sray);

       }
       public static void printME(Integer[] i)
       {           
                  for(Integer x:i)
                  {
                    System.out.println(x);
                  }
       }
       public static void printME(String[] i)
       {
                   for(String x:i)
                   {
                   System.out.println(x);
                   }
       }
}

You might want to override the touchesBegan:withEvent: method of the UIView (or subclass) that contains your UIImageView subview.

Within this method, test if any of the UITouch touches fall inside the bounds of the UIImageView instance (let's say it is called imageView).

That is, does the CGPoint element [touch locationInView] intersect with with the CGRect element [imageView bounds]? Look into the function CGRectContainsPoint to run this test.

You can call the btnTest_Click just like any other function.

The most basic form would be this:

btnTest_Click(this, null);

Breaking news: I've added another answer that uses an Observable rather than an EventEmitter. I recommend that answer over this one. And actually, using an EventEmitter in a service is bad practice.

Original answer: (don't do this)

Put the EventEmitter into a service, which allows the ObservingComponent to directly subscribe (and unsubscribe) to the event:

import {EventEmitter} from 'angular2/core';

export class NavService {
  navchange: EventEmitter<number> = new EventEmitter();
  constructor() {}
  emit(number) {
    this.navchange.emit(number);
  }
  subscribe(component, callback) {
    // set 'this' to component when callback is called
    return this.navchange.subscribe(data => call.callback(component, data));
  }
}

@Component({
  selector: 'obs-comp',
  template: 'obs component, index: {{index}}'
})
export class ObservingComponent {
  item: number;
  subscription: any;
  constructor(private navService:NavService) {
   this.subscription = this.navService.subscribe(this, this.selectedNavItem);
  }
  selectedNavItem(item: number) {
    console.log('item index changed!', item);
    this.item = item;
  }
  ngOnDestroy() {
    this.subscription.unsubscribe();
  }
}

@Component({
  selector: 'my-nav',
  template:`
    <div class="nav-item" (click)="selectedNavItem(1)">item 1 (click me)</div>
  `,
})
export class Navigation {
  constructor(private navService:NavService) {}
  selectedNavItem(item: number) {
    console.log('selected nav item ' + item);
    this.navService.emit(item);
  }
}

If you try the Plunker, there are a few things I don't like about this approach:

• ObservingComponent needs to unsubscribe when it is destroyed
• we have to pass the component to subscribe() so that the proper this is set when the callback is called

Update: An alternative that solves the 2nd bullet is to have the ObservingComponent directly subscribe to the navchange EventEmitter property:

constructor(private navService:NavService) {
   this.subscription = this.navService.navchange.subscribe(data =>
     this.selectedNavItem(data));
}

If we subscribe directly, then we wouldn't need the subscribe() method on the NavService.

To make the NavService slightly more encapsulated, you could add a getNavChangeEmitter() method and use that:

getNavChangeEmitter() { return this.navchange; }  // in NavService

constructor(private navService:NavService) {  // in ObservingComponent
   this.subscription = this.navService.getNavChangeEmitter().subscribe(data =>
     this.selectedNavItem(data));
}

use like this :-

gridview1.DataSource = ds.Tables[0]; <-- Use index or your table name which you want to bind
gridview1.DataBind();

I hope it helps!!

There is not a program but you can make a batch file and run a command like that :

powershell "start-process 'C:\Program Files (x86)\IIS Express\iisexpress.exe' -workingdirectory 'C:\Program Files (x86)\IIS Express\' -windowstyle Hidden"

I work on normalize.css.

The main differences are:

1. Normalize.css preserves useful defaults rather than "unstyling" everything. For example, elements like sup or sub "just work" after including normalize.css (and are actually made more robust) whereas they are visually indistinguishable from normal text after including reset.css. So, normalize.css does not impose a visual starting point (homogeny) upon you. This may not be to everyone's taste. The best thing to do is experiment with both and see which gels with your preferences.

2. Normalize.css corrects some common bugs that are out of scope for reset.css. It has a wider scope than reset.css, and also provides bug fixes for common problems like: display settings for HTML5 elements, the lack of font inheritance by form elements, correcting font-size rendering for pre, SVG overflow in IE9, and the button styling bug in iOS.

3. Normalize.css doesn't clutter your dev tools. A common irritation when using reset.css is the large inheritance chain that is displayed in browser CSS debugging tools. This is not such an issue with normalize.css because of the targeted stylings.

4. Normalize.css is more modular. The project is broken down into relatively independent sections, making it easy for you to potentially remove sections (like the form normalizations) if you know they will never be needed by your website.

5. Normalize.css has better documentation. The normalize.css code is documented inline as well as more comprehensively in the GitHub Wiki. This means you can find out what each line of code is doing, why it was included, what the differences are between browsers, and more easily run your own tests. The project aims to help educate people on how browsers render elements by default, and make it easier for them to be involved in submitting improvements.

I've written in greater detail about this in an article about normalize.css

I ran into the same issue today, try running ur container with this command.

docker run --name mariadbtest -p 3306:3306 -e MYSQL_ROOT_PASSWORD=mypass -d mariadb/server:10.3

Since you add .. after cmake, it will jump up and up (just like cd ..) in the directory. But if you want to run cmake under the same folder with CMakeLists.txt, please use . instead of ...

Declaring the field as 'final' will ensure that the field is a constant and cannot change. The difference comes in the usage of 'static' keyword.

Declaring a field as static means that it is associated with the type and not with the instances. i.e. only one copy of the field will be present for all the objects and not individual copy for each object. Due to this, the static fields can be accessed through the class name.

As you can see, your requirement that the field should be constant is achieved in both cases (declaring the field as 'final' and as 'static final').

Similar question is private final static attribute vs private final attribute

Hope it helps

You are on the right track. Since you said you can't modify the global settings, then the next best thing is to apply the JsonConverter attribute on an as-needed basis, as you suggested. It turns out Json.Net already has a built-in IsoDateTimeConverter that lets you specify the date format. Unfortunately, you can't set the format via the JsonConverter attribute, since the attribute's sole argument is a type. However, there is a simple solution: subclass the IsoDateTimeConverter, then specify the date format in the constructor of the subclass. Apply the JsonConverter attribute where needed, specifying your custom converter, and you're ready to go. Here is the entirety of the code needed:

class CustomDateTimeConverter : IsoDateTimeConverter
{
    public CustomDateTimeConverter()
    {
        base.DateTimeFormat = "yyyy-MM-dd";
    }
}

If you don't mind having the time in there also, you don't even need to subclass the IsoDateTimeConverter. Its default date format is yyyy'-'MM'-'dd'T'HH':'mm':'ss.FFFFFFFK (as seen in the source code).

int? here = (list.ElementAtOrDefault(2) != 0 ? list[2]:(int?) null);

hier is a result where you didnt have to bother with encoding. I used it in my network class and send binary objects as string with it.

        public static byte[] String2ByteArray(string str)
        {
            char[] chars = str.ToArray();
            byte[] bytes = new byte[chars.Length * 2];

            for (int i = 0; i < chars.Length; i++)
                Array.Copy(BitConverter.GetBytes(chars[i]), 0, bytes, i * 2, 2);

            return bytes;
        }

        public static string ByteArray2String(byte[] bytes)
        {
            char[] chars = new char[bytes.Length / 2];

            for (int i = 0; i < chars.Length; i++)
                chars[i] = BitConverter.ToChar(bytes, i * 2);

            return new string(chars);
        }

Implement the return statement like the example below! You should be good. I hope it helps someone..

class Example(object):
    def the_example(self):
        itsProblem = "problem"
        return itsProblem 


theExample = Example()
print theExample.the_example()

The solution is:

pylab.savefig('foo.png')

JSONArray objects have a function getJSONObject(int index), you can loop through all of the JSONObjects by writing a simple for-loop:

JSONArray array;
for(int n = 0; n < array.length(); n++)
{
    JSONObject object = array.getJSONObject(n);
    // do some stuff....
}

It's available in the HTTP referer header. You can get it in a servlet as follows:

String referrer = request.getHeader("referer"); // Yes, with the legendary misspelling.

You, however, need to realize that this is a client-controlled value and can thus be spoofed to something entirely different or even removed. Thus, whatever value it returns, you should not use it for any critical business processes in the backend, but only for presentation control (e.g. hiding/showing/changing certain pure layout parts) and/or statistics.

For the interested, background about the misspelling can be found in Wikipedia.

As per PHP Documentation,

What does thread safety mean when downloading PHP?

Thread Safety means that binary can work in a multithreaded webserver context, such as Apache 2 on Windows. Thread Safety works by creating a local storage copy in each thread, so that the data won't collide with another thread.

So what do I choose? If you choose to run PHP as a CGI binary, then you won't need thread safety, because the binary is invoked at each request. For multithreaded webservers, such as IIS5 and IIS6, you should use the threaded version of PHP.

Following Libraries are not thread safe. They are not recommended for use in a multi-threaded environment.

• SNMP (Unix)
• mSQL (Unix)
• IMAP (Win/Unix)
• Sybase-CT (Linux, libc5)

Simply grab a reference to the target view controller in prepareForSegue: method and pass any objects you need to there. Here's an example...

- (void)prepareForSegue:(UIStoryboardSegue *)segue sender:(id)sender
{
    // Make sure your segue name in storyboard is the same as this line
    if ([[segue identifier] isEqualToString:@"YOUR_SEGUE_NAME_HERE"])
    {
        // Get reference to the destination view controller
        YourViewController *vc = [segue destinationViewController];

        // Pass any objects to the view controller here, like...
        [vc setMyObjectHere:object];
    }
}

REVISION: You can also use performSegueWithIdentifier:sender: method to activate the transition to a new view based on a selection or button press.

For instance, consider I had two view controllers. The first contains three buttons and the second needs to know which of those buttons has been pressed before the transition. You could wire the buttons up to an IBAction in your code which uses performSegueWithIdentifier: method, like this...

// When any of my buttons are pressed, push the next view
- (IBAction)buttonPressed:(id)sender
{
    [self performSegueWithIdentifier:@"MySegue" sender:sender];
}

// This will get called too before the view appears
- (void)prepareForSegue:(UIStoryboardSegue *)segue sender:(id)sender
{
    if ([[segue identifier] isEqualToString:@"MySegue"]) {

        // Get destination view
        SecondView *vc = [segue destinationViewController];

        // Get button tag number (or do whatever you need to do here, based on your object
        NSInteger tagIndex = [(UIButton *)sender tag];

        // Pass the information to your destination view
        [vc setSelectedButton:tagIndex];
    }
}

EDIT: The demo application I originally attached is now six years old, so I've removed it to avoid any confusion.

You can do that to enable search in ng-keypress enter for input text and in ng-click for the icon:

<input type="text" ng-model="searchText" ng-keypress="keyEnter(this,$event)" />
<button ng-click="check(searchText)">Check!</button>

in the controller
$scope.search = function (searchText) {
        console.log(searchText);
    }
    $scope.keyEnter = function (serachText,$event) {
        var keyCode = $event.which || $event.keyCode;
        if (keyCode === 13) {//KeyCode for Enter key
           console.log(searchText);
        }
    }

Simply Set the Time Zone and Get Back According

new Date().toLocaleString("en-US", {timeZone: "America/New_York"})

Other Time-zones are as Following

var world_timezones =
[
    'Europe/Andorra',
    'Asia/Dubai',
    'Asia/Kabul',
    'Europe/Tirane',
    'Asia/Yerevan',
    'Antarctica/Casey',
    'Antarctica/Davis',
    'Antarctica/DumontDUrville', 
    'Antarctica/Mawson',
    'Antarctica/Palmer',
    'Antarctica/Rothera',
    'Antarctica/Syowa',
    'Antarctica/Troll',
    'Antarctica/Vostok',
    'America/Argentina/Buenos_Aires',
    'America/Argentina/Cordoba',
    'America/Argentina/Salta',
    'America/Argentina/Jujuy',
    'America/Argentina/Tucuman',
    'America/Argentina/Catamarca',
    'America/Argentina/La_Rioja',
    'America/Argentina/San_Juan',
    'America/Argentina/Mendoza',
    'America/Argentina/San_Luis',
    'America/Argentina/Rio_Gallegos',
    'America/Argentina/Ushuaia',
    'Pacific/Pago_Pago',
    'Europe/Vienna',
    'Australia/Lord_Howe',
    'Antarctica/Macquarie',
    'Australia/Hobart',
    'Australia/Currie',
    'Australia/Melbourne',
    'Australia/Sydney',
    'Australia/Broken_Hill',
    'Australia/Brisbane',
    'Australia/Lindeman',
    'Australia/Adelaide',
    'Australia/Darwin',
    'Australia/Perth',
    'Australia/Eucla',
    'Asia/Baku',
    'America/Barbados',
    'Asia/Dhaka',
    'Europe/Brussels',
    'Europe/Sofia',
    'Atlantic/Bermuda',
    'Asia/Brunei',
    'America/La_Paz',
    'America/Noronha',
    'America/Belem',
    'America/Fortaleza',
    'America/Recife',
    'America/Araguaina',
    'America/Maceio',
    'America/Bahia',
    'America/Sao_Paulo',
    'America/Campo_Grande',
    'America/Cuiaba',
    'America/Santarem',
    'America/Porto_Velho',
    'America/Boa_Vista',
    'America/Manaus',
    'America/Eirunepe',
    'America/Rio_Branco',
    'America/Nassau',
    'Asia/Thimphu',
    'Europe/Minsk',
    'America/Belize',
    'America/St_Johns',
    'America/Halifax',
    'America/Glace_Bay',
    'America/Moncton',
    'America/Goose_Bay',
    'America/Blanc-Sablon',
    'America/Toronto',
    'America/Nipigon',
    'America/Thunder_Bay',
    'America/Iqaluit',
    'America/Pangnirtung',
    'America/Atikokan',
    'America/Winnipeg',
    'America/Rainy_River',
    'America/Resolute',
    'America/Rankin_Inlet',
    'America/Regina',
    'America/Swift_Current',
    'America/Edmonton',
    'America/Cambridge_Bay',
    'America/Yellowknife',
    'America/Inuvik',
    'America/Creston',
    'America/Dawson_Creek',
    'America/Fort_Nelson',
    'America/Vancouver',
    'America/Whitehorse',
    'America/Dawson',
    'Indian/Cocos',
    'Europe/Zurich',
    'Africa/Abidjan',
    'Pacific/Rarotonga',
    'America/Santiago',
    'America/Punta_Arenas',
    'Pacific/Easter',
    'Asia/Shanghai',
    'Asia/Urumqi',
    'America/Bogota',
    'America/Costa_Rica',
    'America/Havana',
    'Atlantic/Cape_Verde',
    'America/Curacao',
    'Indian/Christmas',
    'Asia/Nicosia',
    'Asia/Famagusta',
    'Europe/Prague',
    'Europe/Berlin',
    'Europe/Copenhagen',
    'America/Santo_Domingo',
    'Africa/Algiers',
    'America/Guayaquil',
    'Pacific/Galapagos',
    'Europe/Tallinn',
    'Africa/Cairo',
    'Africa/El_Aaiun',
    'Europe/Madrid',
    'Africa/Ceuta',
    'Atlantic/Canary',
    'Europe/Helsinki',
    'Pacific/Fiji',
    'Atlantic/Stanley',
    'Pacific/Chuuk',
    'Pacific/Pohnpei',
    'Pacific/Kosrae',
    'Atlantic/Faroe',
    'Europe/Paris',
    'Europe/London',
    'Asia/Tbilisi',
    'America/Cayenne',
    'Africa/Accra',
    'Europe/Gibraltar',
    'America/Godthab',
    'America/Danmarkshavn',
    'America/Scoresbysund',
    'America/Thule',
    'Europe/Athens',
    'Atlantic/South_Georgia',
    'America/Guatemala',
    'Pacific/Guam',
    'Africa/Bissau',
    'America/Guyana',
    'Asia/Hong_Kong',
    'America/Tegucigalpa',
    'America/Port-au-Prince',
    'Europe/Budapest',
    'Asia/Jakarta',
    'Asia/Pontianak',
    'Asia/Makassar',
    'Asia/Jayapura',
    'Europe/Dublin',
    'Asia/Jerusalem',
    'Asia/Kolkata',
    'Indian/Chagos',
    'Asia/Baghdad',
    'Asia/Tehran',
    'Atlantic/Reykjavik',
    'Europe/Rome',
    'America/Jamaica',
    'Asia/Amman',
    'Asia/Tokyo',
    'Africa/Nairobi',
    'Asia/Bishkek',
    'Pacific/Tarawa',
    'Pacific/Enderbury',
    'Pacific/Kiritimati',
    'Asia/Pyongyang',
    'Asia/Seoul',
    'Asia/Almaty',
    'Asia/Qyzylorda',
    'Asia/Qostanay', 
    'Asia/Aqtobe',
    'Asia/Aqtau',
    'Asia/Atyrau',
    'Asia/Oral',
    'Asia/Beirut',
    'Asia/Colombo',
    'Africa/Monrovia',
    'Europe/Vilnius',
    'Europe/Luxembourg',
    'Europe/Riga',
    'Africa/Tripoli',
    'Africa/Casablanca',
    'Europe/Monaco',
    'Europe/Chisinau',
    'Pacific/Majuro',
    'Pacific/Kwajalein',
    'Asia/Yangon',
    'Asia/Ulaanbaatar',
    'Asia/Hovd',
    'Asia/Choibalsan',
    'Asia/Macau',
    'America/Martinique',
    'Europe/Malta',
    'Indian/Mauritius',
    'Indian/Maldives',
    'America/Mexico_City',
    'America/Cancun',
    'America/Merida',
    'America/Monterrey',
    'America/Matamoros',
    'America/Mazatlan',
    'America/Chihuahua',
    'America/Ojinaga',
    'America/Hermosillo',
    'America/Tijuana',
    'America/Bahia_Banderas',
    'Asia/Kuala_Lumpur',
    'Asia/Kuching',
    'Africa/Maputo',
    'Africa/Windhoek',
    'Pacific/Noumea',
    'Pacific/Norfolk',
    'Africa/Lagos',
    'America/Managua',
    'Europe/Amsterdam',
    'Europe/Oslo',
    'Asia/Kathmandu',
    'Pacific/Nauru',
    'Pacific/Niue',
    'Pacific/Auckland',
    'Pacific/Chatham',
    'America/Panama',
    'America/Lima',
    'Pacific/Tahiti',
    'Pacific/Marquesas',
    'Pacific/Gambier',
    'Pacific/Port_Moresby',
    'Pacific/Bougainville',
    'Asia/Manila',
    'Asia/Karachi',
    'Europe/Warsaw',
    'America/Miquelon',
    'Pacific/Pitcairn',
    'America/Puerto_Rico',
    'Asia/Gaza',
    'Asia/Hebron',
    'Europe/Lisbon',
    'Atlantic/Madeira',
    'Atlantic/Azores',
    'Pacific/Palau',
    'America/Asuncion',
    'Asia/Qatar',
    'Indian/Reunion',
    'Europe/Bucharest',
    'Europe/Belgrade',
    'Europe/Kaliningrad',
    'Europe/Moscow',
    'Europe/Simferopol',
    'Europe/Kirov',
    'Europe/Astrakhan',
    'Europe/Volgograd',
    'Europe/Saratov',
    'Europe/Ulyanovsk',
    'Europe/Samara',
    'Asia/Yekaterinburg',
    'Asia/Omsk',
    'Asia/Novosibirsk',
    'Asia/Barnaul',
    'Asia/Tomsk',
    'Asia/Novokuznetsk',
    'Asia/Krasnoyarsk',
    'Asia/Irkutsk',
    'Asia/Chita',
    'Asia/Yakutsk',
    'Asia/Khandyga',
    'Asia/Vladivostok',
    'Asia/Ust-Nera',
    'Asia/Magadan',
    'Asia/Sakhalin',
    'Asia/Srednekolymsk',
    'Asia/Kamchatka',
    'Asia/Anadyr',
    'Asia/Riyadh',
    'Pacific/Guadalcanal',
    'Indian/Mahe',
    'Africa/Khartoum',
    'Europe/Stockholm',
    'Asia/Singapore',
    'America/Paramaribo',
    'Africa/Juba',
    'Africa/Sao_Tome',
    'America/El_Salvador',
    'Asia/Damascus',
    'America/Grand_Turk',
    'Africa/Ndjamena',
    'Indian/Kerguelen',
    'Asia/Bangkok',
    'Asia/Dushanbe',
    'Pacific/Fakaofo',
    'Asia/Dili',
    'Asia/Ashgabat',
    'Africa/Tunis',
    'Pacific/Tongatapu',
    'Europe/Istanbul',
    'America/Port_of_Spain',
    'Pacific/Funafuti',
    'Asia/Taipei',
    'Europe/Kiev',
    'Europe/Uzhgorod',
    'Europe/Zaporozhye',
    'Pacific/Wake',
    'America/New_York',
    'America/Detroit',
    'America/Kentucky/Louisville',
    'America/Kentucky/Monticello',
    'America/Indiana/Indianapolis',
    'America/Indiana/Vincennes',
    'America/Indiana/Winamac',
    'America/Indiana/Marengo',
    'America/Indiana/Petersburg',
    'America/Indiana/Vevay',
    'America/Chicago',
    'America/Indiana/Tell_City',
    'America/Indiana/Knox',
    'America/Menominee',
    'America/North_Dakota/Center',
    'America/North_Dakota/New_Salem',
    'America/North_Dakota/Beulah',
    'America/Denver',
    'America/Boise',
    'America/Phoenix',
    'America/Los_Angeles',
    'America/Anchorage',
    'America/Juneau',
    'America/Sitka',
    'America/Metlakatla',
    'America/Yakutat',
    'America/Nome',
    'America/Adak',
    'Pacific/Honolulu',
    'America/Montevideo',
    'Asia/Samarkand',
    'Asia/Tashkent',
    'America/Caracas',
    'Asia/Ho_Chi_Minh',
    'Pacific/Efate',
    'Pacific/Wallis',
    'Pacific/Apia',
    'Africa/Johannesburg'
];

This answer is deprecated - XCode 12 has deprecated the Legacy Build System, it will be removed in a further release

I'm using XCode 11.4 Can't build old project

Xcode => File => Project Settings => Build System => Legacy Build System

On Linux you can use clock_gettime():

clock_gettime(CLOCK_PROCESS_CPUTIME_ID, &start); // get initial time-stamp

// ... do stuff ... //

clock_gettime(CLOCK_PROCESS_CPUTIME_ID, &end);   // get final time-stamp

double t_ns = (double)(end.tv_sec - start.tv_sec) * 1.0e9 +
              (double)(end.tv_nsec - start.tv_nsec);
                                                 // subtract time-stamps and
                                                 // multiply to get elapsed
                                                 // time in ns

Possibly a duplicate answer but quite useful for me. You can implement the method given below in RecyclerView.Adapter<RecyclerView.ViewHolder> and can use this method as per your requirements, I hope it will work for you

public void removeItem(@NonNull Object object) {
        mDataSetList.remove(object);
        notifyDataSetChanged();
    }

Use the .values() method:

>>> Blog.objects.values()
[{'id': 1, 'name': 'Beatles Blog', 'tagline': 'All the latest Beatles news.'}],
>>> Blog.objects.values('id', 'name')
[{'id': 1, 'name': 'Beatles Blog'}]

Note: the result is a QuerySet which mostly behaves like a list, but isn't actually an instance of list. Use list(Blog.objects.values(…)) if you really need an instance of list.

The problem is that you used the select option, this is where you went wrong. Select signifies that a textbox or textArea has a focus. What you need to do is use change. "Fires when a new choice is made in a select element", also used like blur when moving away from a textbox or textArea.

function start(){
      document.getElementById("activitySelector").addEventListener("change", addActivityItem, false);
      }

function addActivityItem(){
      //option is selected
      alert("yeah");
}

window.addEventListener("load", start, false);

The difference can be found in the links already provided but which one to use usually comes down to the "Principle of Least Knowledge". Only allow the least visibility that is needed.

For anyone interested and using a newer rails and the Devise gem: Devise's "trackable" option includes a column for current/last_sign_in_ip in the users table.

If you want to access the variables some sort of dynamic you may use reflection. However Reflection works not for local variables. It is only applyable for class attributes.

A rough quick and dirty example is this:

public class T {
    public Integer n1;
    public Integer n2;
    public Integer n3;

    public void accessAttributes() throws IllegalArgumentException, SecurityException, IllegalAccessException,
            NoSuchFieldException {

        for (int i = 1; i < 4; i++) {
            T.class.getField("n" + i).set(this, 5);
        }
    }
}

You need to improve this code in various ways it is only an example. This is also not considered to be good code.

Of course this will generate each pair twice as each for loop will go through every item of the list.

You could use some itertools magic here to generate all possible combinations:

import itertools
for a, b in itertools.combinations(mylist, 2):
    compare(a, b)

itertools.combinations will pair each element with each other element in the iterable, but only once.

You could still write this using index-based item access, equivalent to what you are used to, using nested for loops:

for i in range(len(mylist)):
    for j in range(i + 1, len(mylist)):
        compare(mylist[i], mylist[j])

Of course this may not look as nice and pythonic but sometimes this is still the easiest and most comprehensible solution, so you should not shy away from solving problems like that.

from PIL import Image

im = Image.open('whatever.png')
width, height = im.size

According to the documentation.

There is the question whether we want to differentiate between cases:

1. "phone" : "" = the value is empty

2. "phone" : null = the value for "phone" was not set yet

If we want differentiate I would use null for this. Otherwise we would need to add a new field like "isAssigned" or so. This is an old Database issue.

you could also grep the line out and then cut it like for instance:

grep 'text' filename | cut -c 1-5

For Centos 7 Use below command to install Python Development Package

Python 2.7

sudo yum install python-dev

Python 3.4

sudo yum install python34-devel

Still if your problem not solved then try installing below packages -

sudo yum install libffi-devel

sudo yum install openssl-devel

Either connect to node instance and use shutdown command or if you are on ubuntu you can try to restart redis server through init.d:

/etc/init.d/redis-server restart

or stop/start it:

/etc/init.d/redis-server stop
/etc/init.d/redis-server start

On Mac

redis-cli shutdown

The below function gives distance between two geocoordinates in miles

create function [dbo].[fnCalcDistanceMiles] (@Lat1 decimal(8,4), @Long1 decimal(8,4), @Lat2 decimal(8,4), @Long2 decimal(8,4))
returns decimal (8,4) as
begin
declare @d decimal(28,10)
-- Convert to radians
set @Lat1 = @Lat1 / 57.2958
set @Long1 = @Long1 / 57.2958
set @Lat2 = @Lat2 / 57.2958
set @Long2 = @Long2 / 57.2958
-- Calc distance
set @d = (Sin(@Lat1) * Sin(@Lat2)) + (Cos(@Lat1) * Cos(@Lat2) * Cos(@Long2 - @Long1))
-- Convert to miles
if @d <> 0
begin
set @d = 3958.75 * Atan(Sqrt(1 - power(@d, 2)) / @d);
end
return @d
end 

The below function gives distance between two geocoordinates in kilometres

CREATE FUNCTION dbo.fnCalcDistanceKM(@lat1 FLOAT, @lat2 FLOAT, @lon1 FLOAT, @lon2 FLOAT)
RETURNS FLOAT 
AS
BEGIN

    RETURN ACOS(SIN(PI()*@lat1/180.0)*SIN(PI()*@lat2/180.0)+COS(PI()*@lat1/180.0)*COS(PI()*@lat2/180.0)*COS(PI()*@lon2/180.0-PI()*@lon1/180.0))*6371
END

The below function gives distance between two geocoordinates in kilometres using Geography data type which was introduced in sql server 2008

DECLARE @g geography;
DECLARE @h geography;
SET @g = geography::STGeomFromText('LINESTRING(-122.360 47.656, -122.343 47.656)', 4326);
SET @h = geography::STGeomFromText('POINT(-122.34900 47.65100)', 4326);
SELECT @g.STDistance(@h);

Usage:

select [dbo].[fnCalcDistanceKM](13.077085,80.262675,13.065701,80.258916)

Reference: Ref1,Ref2

To read the values from keybord and insert element into array

# enter 0 when exit the insert element
echo "Enter the numbers"
read n
while [ $n -ne 0 ]
do
    x[$i]=`expr $n`
    read n
    let i++
done

#display the all array elements
echo "Array values ${x[@]}"
echo "Array values ${x[*]}"

# To find the array length
length=${#x[*]}
echo $length

Just for curiosity and to compare with Saint Hill's answer.

If you need to process heavy data you should not use JVM in client mode. Client mode is not made for optimizations.

Let's compare results of @Saint Hill benchmarks using a JVM in Client mode and Server mode.

Core2Quad Q6600 G0 @ 2.4GHz
JavaSE 1.7.0_40

See also: Real differences between "java -server" and "java -client"?

CLIENT MODE:

len =      2:    111k charAt(i),  105k cbuff[i],   62k new[i],   17k field access.   (chars/ms) 
len =      4:    285k charAt(i),  166k cbuff[i],  114k new[i],   43k field access.   (chars/ms) 
len =      6:    315k charAt(i),  230k cbuff[i],  162k new[i],   69k field access.   (chars/ms) 
len =      8:    333k charAt(i),  275k cbuff[i],  181k new[i],   85k field access.   (chars/ms) 
len =     12:    342k charAt(i),  342k cbuff[i],  222k new[i],  117k field access.   (chars/ms) 
len =     16:    363k charAt(i),  347k cbuff[i],  275k new[i],  152k field access.   (chars/ms) 
len =     20:    363k charAt(i),  392k cbuff[i],  289k new[i],  180k field access.   (chars/ms) 
len =     24:    375k charAt(i),  428k cbuff[i],  311k new[i],  205k field access.   (chars/ms) 
len =     28:    378k charAt(i),  474k cbuff[i],  341k new[i],  233k field access.   (chars/ms) 
len =     32:    376k charAt(i),  492k cbuff[i],  340k new[i],  251k field access.   (chars/ms) 
len =     64:    374k charAt(i),  551k cbuff[i],  374k new[i],  367k field access.   (chars/ms) 
len =    128:    385k charAt(i),  624k cbuff[i],  415k new[i],  509k field access.   (chars/ms) 
len =    256:    390k charAt(i),  675k cbuff[i],  436k new[i],  619k field access.   (chars/ms) 
len =    512:    394k charAt(i),  703k cbuff[i],  439k new[i],  695k field access.   (chars/ms) 
len =   1024:    395k charAt(i),  718k cbuff[i],  462k new[i],  742k field access.   (chars/ms) 
len =   2048:    396k charAt(i),  725k cbuff[i],  471k new[i],  767k field access.   (chars/ms) 
len =   4096:    396k charAt(i),  727k cbuff[i],  459k new[i],  780k field access.   (chars/ms) 
len =   8192:    397k charAt(i),  712k cbuff[i],  446k new[i],  772k field access.   (chars/ms) 

SERVER MODE:

len =      2:     86k charAt(i),   41k cbuff[i],   46k new[i],   80k field access.   (chars/ms) 
len =      4:    571k charAt(i),  250k cbuff[i],   97k new[i],  222k field access.   (chars/ms) 
len =      6:    666k charAt(i),  333k cbuff[i],  125k new[i],  315k field access.   (chars/ms) 
len =      8:    800k charAt(i),  400k cbuff[i],  181k new[i],  380k field access.   (chars/ms) 
len =     12:    800k charAt(i),  521k cbuff[i],  260k new[i],  545k field access.   (chars/ms) 
len =     16:    800k charAt(i),  592k cbuff[i],  296k new[i],  640k field access.   (chars/ms) 
len =     20:    800k charAt(i),  666k cbuff[i],  408k new[i],  800k field access.   (chars/ms) 
len =     24:    800k charAt(i),  705k cbuff[i],  452k new[i],  800k field access.   (chars/ms) 
len =     28:    777k charAt(i),  736k cbuff[i],  368k new[i],  933k field access.   (chars/ms) 
len =     32:    800k charAt(i),  780k cbuff[i],  571k new[i],  969k field access.   (chars/ms) 
len =     64:    800k charAt(i),  901k cbuff[i],  800k new[i],  1306k field access.   (chars/ms) 
len =    128:    1084k charAt(i),  888k cbuff[i],  633k new[i],  1620k field access.   (chars/ms) 
len =    256:    1122k charAt(i),  966k cbuff[i],  729k new[i],  1790k field access.   (chars/ms) 
len =    512:    1163k charAt(i),  1007k cbuff[i],  676k new[i],  1910k field access.   (chars/ms) 
len =   1024:    1179k charAt(i),  1027k cbuff[i],  698k new[i],  1954k field access.   (chars/ms) 
len =   2048:    1184k charAt(i),  1043k cbuff[i],  732k new[i],  2007k field access.   (chars/ms) 
len =   4096:    1188k charAt(i),  1049k cbuff[i],  742k new[i],  2031k field access.   (chars/ms) 
len =   8192:    1157k charAt(i),  1032k cbuff[i],  723k new[i],  2048k field access.   (chars/ms) 

CONCLUSION:

As you can see, server mode is much faster.

?"[" pretty much covers the various ways of accessing elements of things.

Under usage it lists these:

x[i]
x[i, j, ... , drop = TRUE]
x[[i, exact = TRUE]]
x[[i, j, ..., exact = TRUE]]
x$name
getElement(object, name)

x[i] <- value
x[i, j, ...] <- value
x[[i]] <- value
x$i <- value

The second item is sufficient for your purpose

Under Arguments it points out that with [ the arguments i and j can be numeric, character or logical

So these work:

data[1,1]
data[1,"V1"]

As does this:

data$V1[1]

and keeping in mind a data frame is a list of vectors:

data[[1]][1]
data[["V1"]][1]

will also both work.

So that's a few things to be going on with. I suggest you type in the examples at the bottom of the help page one line at a time (yes, actually type the whole thing in one line at a time and see what they all do, you'll pick up stuff very quickly and the typing rather than copypasting is an important part of helping to commit it to memory.)

There is no clean way to do this and like @Nick mentioned above it might just be easier to use the old school way of loops as then you can control this. But if you want to stick with what you got there is one way you could handle this. I'm sure I will get some heat for this one. But...

One way you could do what you want without an if statement is to raise an error and wrap your loop with a try/catch block:

try{
$(sentences).each(function() {
    var s = this;
    alert(s);
    $(words).each(function(i) {
        if (s.indexOf(this) > -1)
        {
            alert('found ' + this);
            throw "Exit Error";
        }
    });
});
}
catch (e)
{
    alert(e)
}

Ok, let the thrashing begin.

Note in 2018: readAsBinaryString is outdated. For use cases where previously you'd have used it, these days you'd use readAsArrayBuffer (or in some cases, readAsDataURL) instead.

readAsBinaryString says that the data must be represented as a binary string, where:

...every byte is represented by an integer in the range [0..255].

JavaScript originally didn't have a "binary" type (until ECMAScript 5's WebGL support of Typed Array* (details below) -- it has been superseded by ECMAScript 2015's ArrayBuffer) and so they went with a String with the guarantee that no character stored in the String would be outside the range 0..255. (They could have gone with an array of Numbers instead, but they didn't; perhaps large Strings are more memory-efficient than large arrays of Numbers, since Numbers are floating-point.)

If you're reading a file that's mostly text in a western script (mostly English, for instance), then that string is going to look a lot like text. If you read a file with Unicode characters in it, you should notice a difference, since JavaScript strings are UTF-16** (details below) and so some characters will have values above 255, whereas a "binary string" according to the File API spec wouldn't have any values above 255 (you'd have two individual "characters" for the two bytes of the Unicode code point).

If you're reading a file that's not text at all (an image, perhaps), you'll probably still get a very similar result between readAsText and readAsBinaryString, but with readAsBinaryString you know that there won't be any attempt to interpret multi-byte sequences as characters. You don't know that if you use readAsText, because readAsText will use an encoding determination to try to figure out what the file's encoding is and then map it to JavaScript's UTF-16 strings.

You can see the effect if you create a file and store it in something other than ASCII or UTF-8. (In Windows you can do this via Notepad; the "Save As" as an encoding drop-down with "Unicode" on it, by which looking at the data they seem to mean UTF-16; I'm sure Mac OS and *nix editors have a similar feature.) Here's a page that dumps the result of reading a file both ways:

<!DOCTYPE HTML>
<html>
<head>
<meta http-equiv="Content-type" content="text/html;charset=UTF-8">
<title>Show File Data</title>
<style type='text/css'>
body {
    font-family: sans-serif;
}
</style>
<script type='text/javascript'>

    function loadFile() {
        var input, file, fr;

        if (typeof window.FileReader !== 'function') {
            bodyAppend("p", "The file API isn't supported on this browser yet.");
            return;
        }

        input = document.getElementById('fileinput');
        if (!input) {
            bodyAppend("p", "Um, couldn't find the fileinput element.");
        }
        else if (!input.files) {
            bodyAppend("p", "This browser doesn't seem to support the `files` property of file inputs.");
        }
        else if (!input.files[0]) {
            bodyAppend("p", "Please select a file before clicking 'Load'");
        }
        else {
            file = input.files[0];
            fr = new FileReader();
            fr.onload = receivedText;
            fr.readAsText(file);
        }

        function receivedText() {
            showResult(fr, "Text");

            fr = new FileReader();
            fr.onload = receivedBinary;
            fr.readAsBinaryString(file);
        }

        function receivedBinary() {
            showResult(fr, "Binary");
        }
    }

    function showResult(fr, label) {
        var markup, result, n, aByte, byteStr;

        markup = [];
        result = fr.result;
        for (n = 0; n < result.length; ++n) {
            aByte = result.charCodeAt(n);
            byteStr = aByte.toString(16);
            if (byteStr.length < 2) {
                byteStr = "0" + byteStr;
            }
            markup.push(byteStr);
        }
        bodyAppend("p", label + " (" + result.length + "):");
        bodyAppend("pre", markup.join(" "));
    }

    function bodyAppend(tagName, innerHTML) {
        var elm;

        elm = document.createElement(tagName);
        elm.innerHTML = innerHTML;
        document.body.appendChild(elm);
    }

</script>
</head>
<body>
<form action='#' onsubmit="return false;">
<input type='file' id='fileinput'>
<input type='button' id='btnLoad' value='Load' onclick='loadFile();'>
</form>
</body>
</html>

If I use that with a "Testing 1 2 3" file stored in UTF-16, here are the results I get:

Text (13):

54 65 73 74 69 6e 67 20 31 20 32 20 33

Binary (28):

ff fe 54 00 65 00 73 00 74 00 69 00 6e 00 67 00 20 00 31 00 20 00 32 00 20 00 33 00

As you can see, readAsText interpreted the characters and so I got 13 (the length of "Testing 1 2 3"), and readAsBinaryString didn't, and so I got 28 (the two-byte BOM plus two bytes for each character).

* XMLHttpRequest.response with responseType = "arraybuffer" is supported in HTML 5.

** "JavaScript strings are UTF-16" may seem like an odd statement; aren't they just Unicode? No, a JavaScript string is a series of UTF-16 code units; you see surrogate pairs as two individual JavaScript "characters" even though, in fact, the surrogate pair as a whole is just one character. See the link for details.

For Kramdown, you can use {:refdef: style="text-align: center;"} to align center

{:refdef: style="text-align: center;"}
![example](https://upload.wikimedia.org/wikipedia/en/a/a9/Example.jpg){: width="50%" .shadow}
{: refdef}
{:refdef: style="text-align: center;"}
*Fig.1: This is an example image. [Source](https://upload.wikimedia.org/wikipedia/en/a/a9/Example.jpg)*
{: refdef}

Your JRE_HOME does not need to point to the "bin" directory. Just set it to C:\Program Files\Java\jre1.8.0_25

The other answers have covered the direct question well, but you may also be interested in using set -e. With that, any command that fails (outside of specific contexts like if tests) will cause the script to abort. For certain scripts, it's very useful.

This one worked for me (in 2021):

tar -xf test.zip

This will unzip the test in the current directory.

Try to give the full path to your csv file

open('/users/gcameron/Desktop/map/data.csv')

The python process is looking for file in the directory it is running from.

Just right click on a table and select "backup". The popup will show various options, including "Format", select "plain" and you get plain SQL.

pgAdmin is just using pg_dump to create the dump, also when you want plain SQL.

It uses something like this:

pg_dump --user user --password --format=plain --table=tablename --inserts --attribute-inserts etc.

This thread is old but was the first one to come up so I thought id share my solution too. Apart from having named routes in your routes.php file. This error can also occur when you have duplicate URLs in your routes file, but with different names, the error can be misleading in this scenario. Example

Route::any('official/form/reject-form', 'FormStatus@rejectForm')->name('reject-form');  


Route::any('official/form/accept-form', 'FormStatus@acceptForm')->name('accept-form');

Changing one of the names solves the problem. Copy pasting and fatigue will get you to this problem :).

To store another value in select options:

$("#select").append('<option value="4">another</option>')

String send = 
    "<?xml version=\"1.0\" encoding=\"utf-8\"?>\n" +
    "<soap:Envelope xmlns:soap=\"http://schemas.xmlsoap.org/soap/envelope/\" xmlns:xsi=\"http://www.w3.org/2001/XMLSchema-instance\" xmlns:xsd=\"http://www.w3.org/2001/XMLSchema\">\n" +
    "        <soap:Body>\n" +
    "        </soap:Body>\n" +
    "</soap:Envelope>";

private static String getResponse(String send) throws Exception {
    String url = "https://api.comscore.com/KeyMeasures.asmx"; //endpoint
    String result = "";
    String username="user_name";
    String password="pass_word";
    String[] command = {"curl", "-u", username+":"+password ,"-X", "POST", "-H", "Content-Type: text/xml", "-d", send, url};
    ProcessBuilder process = new ProcessBuilder(command); 
    Process p;
    try {
        p = process.start();
        BufferedReader reader =  new BufferedReader(new InputStreamReader(p.getInputStream()));
        StringBuilder builder = new StringBuilder();
        String line = null;
        while ( (line = reader.readLine()) != null) {
                builder.append(line);
                builder.append(System.getProperty("line.separator"));
        }
        result = builder.toString();
    }
    catch (IOException e)
    {   System.out.print("error");
        e.printStackTrace();
    }

    return result;
}

Create function like below

  String.prototype.replaceAt = function (index, char) {
      if(char=='') {
          return this.slice(0,index)+this.substr(index+1 + char.length);
      } else {
          return this.substr(0, index) + char + this.substr(index + char.length);
      }
  }

To replace give character like below

  var a="12346";
  a.replaceAt(4,'5');

and to remove character at definite index, give second parameter as empty string

a.replaceAt(4,'');

To delete records from a table that have a datetime value in Date_column older than 30 days use this query:

USE Database_name;
DELETE FROM Table_name
WHERE Date_column < GETDATE() - 30

...or this:

USE Database_name;
DELETE FROM Table_name
WHERE Date_column < DATEADD(dd,-30,GETDATE())

To delete records from a table that have a datetime value in Date_column older than 12 hours:

USE Database_name;
DELETE FROM Table_name
WHERE Date_column < DATEADD(hh,-12,GETDATE())

To delete records from a table that have a datetime value in Date_column older than 15 minutes:

USE Database_name;
DELETE FROM Table_name
WHERE Date_column < DATEADD(mi,-15,GETDATE())

From: http://zarez.net/?p=542

use "-e" to specify the sed-expression

cat input.txt | sed -e 's/foo/bar/g'

max(files, key = os.path.getctime)

is quite incomplete code. What is files? It probably is a list of file names, coming out of os.listdir().

But this list lists only the filename parts (a. k. a. "basenames"), because their path is common. In order to use it correctly, you have to combine it with the path leading to it (and used to obtain it).

Such as (untested):

def newest(path):
    files = os.listdir(path)
    paths = [os.path.join(path, basename) for basename in files]
    return max(paths, key=os.path.getctime)

You can use white-space:pre-wrap on the tooltip. This will make the tooltip respect new lines. Lines will still wrap if they are longer than the default max-width of the container.

.tooltip-inner {
    white-space:pre-wrap;
}

http://jsfiddle.net/chad/TSZSL/52/

If you want to prevent text from wrapping, do the following instead.

.tooltip-inner {
    white-space:pre;
    max-width:none;
}

http://jsfiddle.net/chad/TSZSL/53/

Neither of these will work with a \n in the html, they must actually be actual newlines. Alternatively, you can use encoded newlines 
, but that's probably even less desirable than using <br>'s.

  func tableView(_ tableView: UITableView, editActionsForRowAt indexPath: IndexPath) -> [UITableViewRowAction]? {

        // action one
        let editAction = UITableViewRowAction(style: .default, title: "Edit", handler: { (action, indexPath) in
            print("Edit tapped")

            self.myArray.add(indexPath.row)
        })
        editAction.backgroundColor = UIColor.blue

        // action two
        let deleteAction = UITableViewRowAction(style: .default, title: "Delete", handler: { (action, indexPath) in
            print("Delete tapped")

            self.myArray.removeObject(at: indexPath.row)
            self.myTableView.deleteRows(at: [indexPath], with: UITableViewRowAnimation.automatic)

        })
        deleteAction.backgroundColor = UIColor.red
        // action three
        let shareAction = UITableViewRowAction(style: .default, title: "Share", handler: { (action , indexPath)in
             print("Share Tapped")
        })
        shareAction.backgroundColor = UIColor .green
        return [editAction, deleteAction, shareAction]
    }

Current working version as of Oct 2020, updated to use maven-antrun-plugin 3.0.0.

        <plugin>
            <groupId>org.apache.maven.plugins</groupId>
            <artifactId>maven-antrun-plugin</artifactId>
            <version>3.0.0</version>
            <executions>
                <execution>
                    <id>prepare</id>
                    <phase>package</phase>
                    <configuration>
                        <target>
                            <unzip src="target/shaded-jar/shade-test.jar"
                                   dest="target/unpacked-shade/"/>
                        </target>
                    </configuration>
                    <goals>
                        <goal>run</goal>
                    </goals>
                </execution>
            </executions>
        </plugin>

If anyone is looking to do it in Java 8 streams below is the example.

import java.util.HashMap;
import java.util.Map;

public class CompareTwoMaps {

    public static void main(String[] args) {

        Map<String, String> a = new HashMap<>();
        a.put("foo", "bar" + "bar");
        a.put("zoo", "bar" + "bar");

        Map<String, String> b = new HashMap<>();
        b.put(new String("foo"), "bar" + "bar");
        b.put(new String("zoo"), "bar" + "bar");

        System.out.println("result = " + areEqual(a, b));
    }

    private static boolean areEqual(Map<String, String> first, Map<String, String> second) {
        return first.entrySet().stream()
                .allMatch(e -> e.getValue().equals(second.get(e.getKey())));
    }
}

You can escape % using %% for XML parser, but it is shown twice in device.

To show it once, try following format: \%%

For Example

<string name="zone_50">Fat Burning (50\%% to 60\%%)</string> 

is shown as Fat Burning (50% to 60%) in device

This is the shortest way:

myString = Regex.Replace(myString, @"[;,\t\r ]|[\n]{2}", "\n");

The problem for me was that I had

[formControlName]=""

Instead of

formControlName=""

As the other answers indicate, there is not a way to use sed portably across OS X and Linux without making backup files. So, I instead used this Ruby one-liner to do so:

ruby -pi -e "sub(/ $/, '')" ./config/locales/*.yml

In my case, I needed to call it from a rake task (i.e., inside a Ruby script), so I used this additional level of quoting:

sh %q{ruby -pi -e "sub(/ $/, '')" ./config/locales/*.yml}

Did you set the bind option to allow remote access on the redis server?

Before (file /etc/redis/redis.conf)

bind 127.0.0.1

After

bind 0.0.0.0

and run sudo service redis-server restart to restart the server. If that's not the problem, you might want to check any firewalls that might block the access.

Important: If you don't use a firewall (iptables, ufw..) to control who connects to the port in use, ANYONE can connect to this Redis instance. Without using Redis' AUTH that means anyone can access/change/delete your data. Be safe!

You would have to tune it according to your environment.

Sometimes it's more useful to increase the size of the backlog (acceptCount) instead of the maximum number of threads.

Say, instead of

<Connector ... maxThreads="500" acceptCount="50"

you use

<Connector ... maxThreads="300" acceptCount="150"

you can get much better performance in some cases, cause there would be less threads disputing the resources and the backlog queue would be consumed faster.

In any case, though, you have to do some benchmarks to really know what is best.

set meta tag in head as

 <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1" /> 

use the link http://www.i18nqa.com/debug/utf8-debug.html to replace the symbols character you want.

then use str_replace like

    $find = array('“', '’', '…', '—', '–', '‘', 'é', 'Â', '•', 'Ëœ', 'â€'); // en dash
                        $replace = array('“', '’', '…', '—', '–', '‘', 'é', '', '•', '˜', '”');
$content = str_replace($find, $replace, $content);

Its the method i use and help alot. Thanks!

Crossframe-Scripting is not possible when the two frames have different domains -> Security.

See this: http://javascript.about.com/od/reference/a/frame3.htm

Now to answer your question: there is no solution or work around, you simply should check your website-design why there must be two frames from different domains that changes the url of the other one.

for MacOS user (if High Sierra or higher version) use this:

sudo chown -R $(whoami) $(brew --prefix)/*

The same way you declare any other variable, just use the bit type:

DECLARE @MyVar bit
Set @MyVar = 1  /* True */
Set @MyVar = 0  /* False */

SELECT * FROM [MyTable] WHERE MyBitColumn = @MyVar

For my this is best solution.

function strip_tags_content($string) { 
    // ----- remove HTML TAGs ----- 
    $string = preg_replace ('/<[^>]*>/', ' ', $string); 
    // ----- remove control characters ----- 
    $string = str_replace("\r", '', $string);
    $string = str_replace("\n", ' ', $string);
    $string = str_replace("\t", ' ', $string);
    // ----- remove multiple spaces ----- 
    $string = trim(preg_replace('/ {2,}/', ' ', $string));
    return $string; 

}

I recommend you to use an unordered list for your image gallery.

You should use my code unless you want the image to gain instantly 50% opacity after you hover out. You will have a smoother transition.

#photos li {
    opacity: .5;
    transition: opacity .5s ease-out;
    -moz-transition: opacity .5s ease-out;
    -webkit-transition: opacity .5s ease-out;
    -o-transition: opacity .5s ease-out;
}

#photos li:hover {
    opacity: 1;
}

You may want to have a look at https://isocpp.org/wiki/faq/pointers-to-members#fnptr-vs-memfnptr-types, especially [33.1] Is the type of "pointer-to-member-function" different from "pointer-to-function"?

It could be that I'm late to answer, but this command made me learn a lot about gcloud SDK

gcloud alpha interactive

It's easier to discover by yourself that you'll need gcloud config set project my-project.

However, what I like about gcloud is tab complication, so if you configure your gcloud config with configurations (I know it sounds weird but run this command gcloud config configurations list) you can easily switch between your own projects that you usually work:

The alias that I use is: alias gcca="gcloud config configurations activate" and it works fine with zsh gcloud plugin.

EDIT: To configure one of configurations I usually do this

gcloud config configurations create [CUSTOM_NAME]
gcloud auth login # you can also manually set
gcloud config set project [gcp-project-id]
gcloud config set compute/zone europe-west3-c
gcloud config set compute/region europe-west3

You can use ENV variables too but I like when it's configured this way...

Try

var fu1 = document.getElementById("FileUpload1").value;

• Your formatting pattern fails to match the input string, as noted by other Answers.
• Your input format is terrible.
• You are using troublesome old date-time classes that were supplanted years ago by the java.time classes.

ISO 8601

Instead a format such as yours, use ISO 8601 standard formats for exchanging date-time values as text.

The java.time classes use the standard ISO 8601 formats by default when parsing/generating strings.

Proper time zone name

Specify a proper time zone name in the format of continent/region, such as America/Montreal, Africa/Casablanca, or Pacific/Auckland. Never use the 3-4 letter abbreviation such as EST or IST as they are not true time zones, not standardized, and not even unique(!).

Your IST could mean Iceland Standard Time, India Standard Time, Ireland Standard Time, or others. The java.time classes are left to merely guessing, as there is no logical solution to this ambiguity.

java.time

The modern approach uses the java.time classes.

Define a formatting pattern to match your input strings.

String input = "Sat Jun 01 12:53:10 IST 2013";
DateTimeFormatter f = DateTimeFormatter.ofPattern( "EEE MMM dd HH:mm:ss z uuuu" , Locale.US );
ZonedDateTime zdt = ZonedDateTime.parse( input , f );

zdt.toString(): 2013-06-01T12:53:10Z[Atlantic/Reykjavik]

If your input was not intended for Iceland, you should pre-parse the string to adjust to a proper time zone name. For example, if you are certain the input was intended for India, change IST to Asia/Kolkata.

String input = "Sat Jun 01 12:53:10 IST 2013".replace( "IST" , "Asia/Kolkata" );
DateTimeFormatter f = DateTimeFormatter.ofPattern( "EEE MMM dd HH:mm:ss z uuuu" , Locale.US );
ZonedDateTime zdt = ZonedDateTime.parse( input , f );

zdt.toString(): 2013-06-01T12:53:10+05:30[Asia/Kolkata]

About java.time

The java.time framework is built into Java 8 and later. These classes supplant the troublesome old legacy date-time classes such as java.util.Date, Calendar, & SimpleDateFormat.

The Joda-Time project, now in maintenance mode, advises migration to the java.time classes.

To learn more, see the Oracle Tutorial. And search Stack Overflow for many examples and explanations. Specification is JSR 310.

You may exchange java.time objects directly with your database. Use a JDBC driver compliant with JDBC 4.2 or later. No need for strings, no need for java.sql.* classes.

Where to obtain the java.time classes?

• Java SE 8, Java SE 9, Java SE 10, and later
  • Built-in.
  • Part of the standard Java API with a bundled implementation.
  • Java 9 adds some minor features and fixes.
• Java SE 6 and Java SE 7
  • Much of the java.time functionality is back-ported to Java 6 & 7 in ThreeTen-Backport.
• Android
  • Later versions of Android bundle implementations of the java.time classes.
  • For earlier Android (<26), the ThreeTenABP project adapts ThreeTen-Backport (mentioned above). See How to use ThreeTenABP….

The ThreeTen-Extra project extends java.time with additional classes. This project is a proving ground for possible future additions to java.time. You may find some useful classes here such as Interval, YearWeek, YearQuarter, and more.

I find that image mapping works pretty well. If you have any headers or footers that are images make sure that you apply a bgcolor="fill in the blank" because outlook in most cases wont load the image and you will be left with a transparent header. If you at least designate a color that works with the over all feel of the email it will be less of a shock for the user. Never try and use any styling sheets. Or CSS at all! Just avoid it.

Depending if you're copying content from a word or shared google Doc be sure to (command+F) Find all the (') and (") and replace them within your editing software (especially dreemweaver) because they will show up as code and it's just not good.

ALT is your best friend. use the ALT tag to add in text to all your images. Because odds are they are not going to load right. And that ALT text is what gets people to click the (see images) button. Also define your images Width, Height and make the boarder 0 so you dont get weird lines around your image.

Consider editing all images within Photoshop with a 15px boarder on each side (make background transparent and save as a PNG 24) of image. Sometimes the email clients do not read any padding styles that you apply to the images so it avoids any weird formatting!

Also i found the line under links particularly annoying so if you apply < style="text-decoration:none; color:#whatever color you want here!" > it will remove the line and give you the desired look.

There is alot that can really mess with the over all look and feel.

You need to define height of ul or your div and set overflow equals to auto as below:

<ul style="width: 300px; height: 200px; overflow: auto">
  <li>text</li>
  <li>text</li>

Perhaps you need to read about interactive usage of Matplotlib. However, if you are going to build an app, you should be using the API and embedding the figures in the windows of your chosen GUI toolkit (see examples/embedding_in_tk.py, etc).

If none of the above answers works for you, try the following: Get the "org.eclipse.equinox.simpleconfigurator" and the "org.eclipse.update" folders found under the "eclipse\configuration" from a working Eclipse instance (can be the stock Eclipse downloaded from their website) and replace them in your Eclipse installation directory. This fixed it for me.

You need to apply following changes:

1. Update php.ini (Find right ini file from phpinfo();) and increase post_max_size and upload_max_filesize to size you want:

   sed -i "s/post_max_size =.*/post_max_size = 200M/g" /etc/php5/fpm/php.ini
   sed -i "s/upload_max_filesize =.*/upload_max_filesize = 200M/g" /etc/php5/fpm/php.ini```
   

2. Update NginX settings for your website and add client_max_body_size value in your location, http, or server context.

   location / {
       client_max_body_size 200m;
       ...
   }
   

3. Restart NginX and PHP-FPM:

   service nginx restart
   service php5-fpm restart
   

NOTE: Sometime (In my case almost every time) you need to kill php-fpm process if it didn't refresh by service command properly. To do that you can get list of processes (ps -elf | grep php-fpm) and kill one by one (kill -9 12345) or use following command to do it for you:

ps -elf | grep php-fpm | grep -v grep | awk '{ print $4 }' | xargs kill -9

The for-each loop was introduced in Java 1.5 and is used with collections (and to be pedantic, arrays, and anything implementing the Iterable<E> interface ... which the article notes):

http://download.oracle.com/javase/1,5.0/docs/guide/language/foreach.html

sudo PATH="$PATH:/usr/local/bin" npm install -g <package-name>

On windows 7, find

C:\Users\Simion\AppData\Roaming\Sublime Text 2\Packages\Color Scheme - Default

Find your color scheme file, open it, and find lineHighlight.
Ex:

<key>lineHighlight</key>
<string>#ccc</string>

replace #ccc with your preferred background color.

That only means that an undefined column or parameter name was detected. The errror that DB2 gives should point what that may be:

DB2 SQL Error: SQLCODE=-206, SQLSTATE=42703, SQLERRMC=[THE_UNDEFINED_COLUMN_OR_PARAMETER_NAME], DRIVER=4.8.87

Double check your table definition. Maybe you just missed adding something.

I also tried google-ing this problem and saw this:

http://www.coderanch.com/t/515475/JDBC/databases/sql-insert-statement-giving-sqlcode

You can better understand ClassCastException and casting once you realize that the JVM cannot guess the unknown. If B is an instance of A it has more class members and methods on the heap than A. The JVM cannot guess how to cast A to B since the mapping target is larger, and the JVM will not know how to fill the additional members.

But if A was an instance of B, it would be possible, because A is a reference to a complete instance of B, so the mapping will be one-to-one.

What about:

• Peter Müller
• François Hollande
• Patrick O'Brian
• Silvana Koch-Mehrin

Validating names is a difficult issue, because valid names are not only consisting of the letters A-Z.

At least you should use the Unicode property for letters and add more special characters. A first approach could be e.g.:

String regx = "^[\\p{L} .'-]+$";

\\p{L} is a Unicode Character Property that matches any kind of letter from any language

You can try:

string s1 = Regex.Replace(s, "[^A-Za-z0-9 -]", "");

Where s is your string.

You have to put a period at the end of the external domain so it doesn't think you mean customer1.mycompanydomain.com.localdomain;

So just change:

customer1.com IN CNAME customer1.mycompanydomain.com

To

customer1.com IN CNAME customer1.mycompanydomain.com.

It sounds like you're looking for applicationHost.config, which is located in C:\Windows\System32\inetsrv\config.

Yes, it's an XML file, and yes, editing the file by hand will affect the IIS config after a restart. You can think of IIS Manager as a GUI front-end for editing applicationHost.config and web.config.

when your add permission in manifest then in eclipse go to project and clic

1. click on project
2. click on clean project that's all

k on clean project

jQuery("select#cboDays option[value='Wednesday']").attr("selected", "selected");

If your application has minimum sdk version 16 then you can use finishAffinity()

Finish this activity as well as all activities immediately below it in the current task that have the same affinity.

This is work for me In Top Payment screen remove all back-stack activits,

@Override
public void onBackPressed() {
         finishAffinity();
        startActivity(new Intent(PaymentDoneActivity.this,Home.class));
    } 

http://developer.android.com/reference/android/app/Activity.html#finishAffinity%28%29

The first time I read this it was very helpful to me. Thank you.

Since then I gained some insight about the downside of creating indexes: if you write into a table (UPDATE or INSERT) with one index, you have actually two writing operations in the file system. One for the table data and another one for the index data (and the resorting of it (and - if clustered - the resorting of the table data)). If table and index are located on the same hard disk this costs more time. Thus a table without an index (a heap) , would allow for quicker write operations. (if you had two indexes you would end up with three write operations, and so on)

However, defining two different locations on two different hard disks for index data and table data can decrease/eliminate the problem of increased cost of time. This requires definition of additional file groups with according files on the desired hard disks and definition of table/index location as desired.

Another problem with indexes is their fragmentation over time as data is inserted. REORGANIZE helps, you must write routines to have it done.

In certain scenarios a heap is more helpful than a table with indexes,

e.g:- If you have lots of rivalling writes but only one nightly read outside business hours for reporting.

Also, a differentiation between clustered and non-clustered indexes is rather important.

Helped me:- What do Clustered and Non clustered index actually mean?

That's because the event onsubmit is triggered before the form is submitted.

Remove your onSubmit and output that JavaScript in your PHP script after you have processed the request. You are closing the window right now, and cancelling the request to your server.

Sure, You can customize the sort.

You need to give the Sort() a delegate to a comparison method which it will use to sort.

Using an anonymous method:

Array.Sort<int>( array,
delegate(int a, int b)
  {
    return b - a; //Normal compare is a-b
  }); 

Read more about it:

Sorting arrays
MSDN - Array.Sort Method (T[], Comparison)

I am wondering what's your purpose of doing the iframe print.

I met a similar problem a moment ago: use chrome's print preview to generate a PDF file of a iframe.

Finally I solved my problem with a trick:

$('#print').click(function() {_x000D_
    $('#noniframe').hide(); // hide other elements_x000D_
    window.print();         // now, only the iframe left_x000D_
    $('#noniframe').show(); // show other elements again._x000D_
});

To dynamically change the color of a text box goto properties, goto font/Color and set the following expression

=SWITCH(Fields!CurrentRiskLevel.Value = "Low", "Green",
Fields!CurrentRiskLevel.Value = "Moderate", "Blue",
Fields!CurrentRiskLevel.Value = "Medium", "Yellow",
Fields!CurrentRiskLevel.Value = "High", "Orange",
Fields!CurrentRiskLevel.Value = "Very High", "Red"
)

Same way for tolerance

=SWITCH(Fields!Tolerance.Value = "Low", "Red",
Fields!Tolerance.Value = "Moderate", "Orange",
Fields!Tolerance.Value = "Medium", "Yellow",
Fields!Tolerance.Value = "High", "Blue",
Fields!Tolerance.Value = "Very High", "Green")

type java -version in command prompt, it will give you the installed version of java on your system.

OkHttp is lightweight and powerful when combined with Retrofit as well. This works well for general Java use as well as on Android.

OkHttp: http://square.github.io/okhttp/

public static final MediaType JSON
    = MediaType.parse("application/json; charset=utf-8");

OkHttpClient client = new OkHttpClient();

String post(String url, String json) throws IOException {
  RequestBody body = RequestBody.create(JSON, json);
  Request request = new Request.Builder()
      .url(url)
      .post(body)
      .build();
  Response response = client.newCall(request).execute();
  return response.body().string();
}

Retrofit: http://square.github.io/retrofit/

public interface GitHubService {
  @GET("/users/{user}/repos")
  Call<List<Repo>> listRepos(@Path("user") String user);
}

Thanks to Gruff Bunny and Louis' comments, I found the source of the issue.

As I use Backbone.js too, I loaded a special build of Lodash compatible with Backbone and Underscore that disables some features. In this example:

var clone = _.clone(data, true);

data[1].values.d = 'x';

• with the Normal build: _.isEqual(data, clone) === false
• with the Underscore build: _.isEqual(data, clone) === true

I just replaced the Underscore build with the Normal build in my Backbone application and the application is still working. So I can now use the Lodash .clone with the expected behaviour.

Edit 2018: the Underscore build doesn't seem to exist anymore. If you are reading this in 2018, you could be interested by this documentation (Backbone and Lodash).

Because of double print function. I suggest you to use return instead of print inside the function definition.

def lyrics():
    return "The very first line"
print(lyrics())

OR

def lyrics():
    print("The very first line")
lyrics()

After using some of the solutions here for some time, I developed my own that works well for my MVVM setup. Note that it's not as dynamic as some of the other ones in a sense of still allowing users to enter erroneous characters, but it blocks them from pressing the button and thus doing anything. This goes well with my theme of graying out buttons when actions cannot be performed.

I have a TextBox that a user must enter a number of document pages to be printed:

<TextBox Text="{Binding NumberPagesToPrint, UpdateSourceTrigger=PropertyChanged}"/>

...with this binding property:

private string _numberPagesToPrint;
public string NumberPagesToPrint
{
    get { return _numberPagesToPrint; }
    set
    {
        if (_numberPagesToPrint == value)
        {
            return;
        }

        _numberPagesToPrint = value;
        OnPropertyChanged("NumberPagesToPrint");
    }
}

I also have a button:

<Button Template="{DynamicResource CustomButton_Flat}" Content="Set"
        Command="{Binding SetNumberPagesCommand}"/>

...with this command binding:

private RelayCommand _setNumberPagesCommand;
public ICommand SetNumberPagesCommand
{
    get
    {
        if (_setNumberPagesCommand == null)
        {
            int num;
            _setNumberPagesCommand = new RelayCommand(param => SetNumberOfPages(),
                () => Int32.TryParse(NumberPagesToPrint, out num));
        }

        return _setNumberPagesCommand;
    }
}

And then there's the method of SetNumberOfPages(), but it's unimportant for this topic. It works well in my case because I don't have to add any code into the View's code-behind file and it allows me to control behavior using the Command property.

From a comment:

I want to sort each set.

That's easy. For any set s (or anything else iterable), sorted(s) returns a list of the elements of s in sorted order:

>>> s = set(['0.000000000', '0.009518000', '10.277200999', '0.030810999', '0.018384000', '4.918560000'])
>>> sorted(s)
['0.000000000', '0.009518000', '0.018384000', '0.030810999', '10.277200999', '4.918560000']

Note that sorted is giving you a list, not a set. That's because the whole point of a set, both in mathematics and in almost every programming language,* is that it's not ordered: the sets {1, 2} and {2, 1} are the same set.

You probably don't really want to sort those elements as strings, but as numbers (so 4.918560000 will come before 10.277200999 rather than after).

The best solution is most likely to store the numbers as numbers rather than strings in the first place. But if not, you just need to use a key function:

>>> sorted(s, key=float)
['0.000000000', '0.009518000', '0.018384000', '0.030810999', '4.918560000', '10.277200999']

For more information, see the Sorting HOWTO in the official docs.

* See the comments for exceptions.

No need to get too complicated. If all you need is ² then use the unicode representation.

http://en.wikipedia.org/wiki/Unicode_subscripts_and_superscripts

(which is how I assume you got the ² to appear in your question. )

Here is a one-line function to pretty-print the routes in an Express app:

const getAppRoutes = (app) => app._router.stack.reduce(
  (acc, val) => acc.concat(
    val.route ? [val.route.path] :
      val.name === "router" ? val.handle.stack.filter(
        x => x.route).map(
          x => val.regexp.toString().match(/\/[a-z]+/)[0] + (
            x.route.path === '/' ? '' : x.route.path)) : []) , []).sort();

I agree. Once it is uploaded to somewhere the user's browser can access then it is pretty easy to get the size. As you need to wait for the image to load you'll want to hook into the onload event for img.

var width, height;

var img = document.createElement("img");
img.onload = function() {
    // `naturalWidth`/`naturalHeight` aren't supported on <IE9. Fallback to normal width/height
    // The natural size is the actual image size regardless of rendering.
    // The 'normal' width/height are for the **rendered** size.

    width  = img.naturalWidth  || img.width;
    height = img.naturalHeight || img.height; 

    // Do something with the width and height
}

// Setting the source makes it start downloading and eventually call `onload`
img.src = "http://your.website.com/userUploadedImage.jpg";

Your .htaccess is slightly off. Look at mine:

 RewriteEngine On
 RewriteBase /codeigniter  

  RewriteCond %{REQUEST_FILENAME} !-f
  RewriteCond %{REQUEST_FILENAME} !-d
  RewriteCond $1 !^(index\.php|images|robots\.txt|css|docs|js|system)
  RewriteRule ^(.*)$ /codeigniter/index.php?/$1 [L]

Notice "codeigniter" in two places.

after that, in your config:

base_url = "http://localhost/codeigniter"
index = ""

Change codeigniter to "ci" whereever appropriate

The most libraries offer escaping everything they can, including hundreds of symbols and thousands of non-ASCII characters which is not what you want in UTF-8 world.

Also, as Jeff Williams noted, there's no single “escape HTML” option, there are several contexts.

Assuming you never use unquoted attributes, and keeping in mind that different contexts exist, it've written my own version:

private static final long BODY_ESCAPE =
        1L << '&' | 1L << '<' | 1L << '>';
private static final long DOUBLE_QUOTED_ATTR_ESCAPE =
        1L << '"' | 1L << '&' | 1L << '<' | 1L << '>';
private static final long SINGLE_QUOTED_ATTR_ESCAPE =
        1L << '"' | 1L << '&' | 1L << '\'' | 1L << '<' | 1L << '>';

// 'quot' and 'apos' are 1 char longer than '#34' and '#39' which I've decided to use
private static final String REPLACEMENTS = "&#34;&amp;&#39;&lt;&gt;";
private static final int REPL_SLICES = /*  |0,   5,   10,  15, 19, 23*/
        5<<5 | 10<<10 | 15<<15 | 19<<20 | 23<<25;
// These 5-bit numbers packed into a single int
// are indices within REPLACEMENTS which is a 'flat' String[]

private static void appendEscaped(
        StringBuilder builder,
        CharSequence content,
        long escapes // pass BODY_ESCAPE or *_QUOTED_ATTR_ESCAPE here
) {
    int startIdx = 0, len = content.length();
    for (int i = 0; i < len; i++) {
        char c = content.charAt(i);
        long one;
        if (((c & 63) == c) && ((one = 1L << c) & escapes) != 0) {
        // -^^^^^^^^^^^^^^^   -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
        // |                  | take only dangerous characters
        // | java shifts longs by 6 least significant bits,
        // | e. g. << 0b110111111 is same as >> 0b111111.
        // | Filter out bigger characters

            int index = Long.bitCount(SINGLE_QUOTED_ATTR_ESCAPE & (one - 1));
            builder.append(content, startIdx, i /* exclusive */)
                    .append(REPLACEMENTS,
                            REPL_SLICES >>> 5*index & 31,
                            REPL_SLICES >>> 5*(index+1) & 31);
            startIdx = i + 1;
        }
    }
    builder.append(content, startIdx, len);
}

Consider copy-pasting from Gist without line length limit.

While iterating over a list or array with this method:

ar = [10, 11, 12]
for i in ar:
    theSum = theSum + ar[i]

You are actually getting the values of list or array sequentially in i variable. If you print the variable i inside the for loop. You will get following output:

10
11
12

However, in your code you are confusing i variable with index value of array. Therefore, while doing ar[i] will mean ar[10] for the first iteration. Which is of course index out of range throwing IndexError

Edit You can read this for better understanding of different methods of iterating over array or list in Python

I answered a similar question before on how to run a Docker container inside Docker.

To run docker inside docker is definitely possible. The main thing is that you run the outer container with extra privileges (starting with --privileged=true) and then install docker in that container.

Check this blog post for more info: Docker-in-Docker.

One potential use case for this is described in this entry. The blog describes how to build docker containers within a Jenkins docker container.

However, Docker inside Docker it is not the recommended approach to solve this type of problems. Instead, the recommended approach is to create "sibling" containers as described in this post

So, running Docker inside Docker was by many considered as a good type of solution for this type of problems. Now, the trend is to use "sibling" containers instead. See the answer by @predmijat on this page for more info.

Its so simple! You can go with your button click event, I used it with a button property Name: "btnClearImage"

// Note 1a:
// after clearing the picture box 
// you can also disable clear button 
// by inserting follwoing one line of code:

btnClearImage.Enabled = false   

// Note 1b:
// you should set your button Enabled property
// to "False"
// after that you will need to Insert 
// the following line to concerned event or button
// that load your image into picturebox1 
// code line is as follows:

btnClearImage.Enabled = true;

In general, the most appropriated way to avoid this problem, (also because of better Mockito integration in JUnit) is to use the Setter/Field Injection as described at https://www.baeldung.com/circular-dependencies-in-spring and at https://docs.spring.io/spring/docs/current/spring-framework-reference/html/beans.html

@Component("bean1")
@Scope("view")
public class Bean1 {
    private Bean2 bean2;

    @Autowired
    public void setBean2(Bean2 bean2) {
        this.bean2 = bean2;
    }
}

@Component("bean2")
@Scope("view")
public class Bean2 {
    private Bean1 bean1;

    @Autowired
    public void setBean1(Bean1 bean1) {
        this.bean1 = bean1;
    }
}

<div id="sample"></div>   
 <form>
        <fieldset>
            <legend>Add New Contact</legend>
            <input type="text" name="fullname" placeholder="First name and last name" required /> <br />
            <input type="email" name="email" placeholder="[email protected]" required /> <br />
            <input type="text" name="phone" placeholder="Personal phone number: mobile, home phone etc." required /> <br />
            <input type="submit" name="submit" id= "submitButton" class="button" value="Add Contact" onClick="" />
            <input type="button" name="cancel" class="button" value="Reset" />
        </fieldset>
    </form>

<script>

    $(document).ready(function(){
         $("#submitButton").click(function(){
            $("#sample").load(filenameofyourfunction?the the variable you need);
         });
    });

</script>

To add to advice already given, if you have a web app running through IIS that uses the DB, you may also need to stop (not recycle) the app pool for the app while you restore, then re-start. Stopping the app pool kills off active http connections and doesn't allow any more, which could otherwise end up allowing processes to be triggered that connect to and thereby lock the database. This is a known issue for example with the Umbraco Content Management System when restoring its database

This is designed for use when you have a shell script build step. Use only the first two lines to get the file name.

You can get the console log file (using bash magic) for the current build from a shell script this way and check it for some error string, failing the job if found:

logFilename=${JENKINS_HOME}/${JOB_URL:${#JENKINS_URL}}
logFilename=${logFilename//job\//jobs\/}builds/${BUILD_NUMBER}/log

grep "**Failure**" ${logFilename} ; exitCode=$?
[[ $exitCode -ne 1 ]] && exit 1

You have to build the file name by taking the JOB_URL, stripping off the leading host name part, adding in the path to JENKINS_HOME, replacing "/job/" to "/jobs/" to handle all nested folders, adding the current build number and the file name.

The grep returns 0 if the string is found and 2 if there is a file error. So a 1 means it found the error indication string. That makes the build fail.

This worked for me in a small test:

sourceEncoding = "iso-8859-1"
targetEncoding = "utf-8"
source = open("source")
target = open("target", "w")

target.write(unicode(source.read(), sourceEncoding).encode(targetEncoding))

This example puts your JSON into proper format and does an existence check. I use jquery for convenience.

http://jsfiddle.net/nXFxC/

<!-- HTML -->
<span id="test">Hello</span><br>
<span id="test2">Hello</span>

//Javascript

$(document).ready(function(){
    var JSON = {"animals":[{"name":"cat"}, {"name":"dog"}]};

if(JSON.animals[1].name){      
$("#test").html("It exists");
}
if(!JSON.animals[2]){       
$("#test2").html("It doesn't exist");
}
});

You didn't select post_id in the subquery. You have to select it in the subquery like this:

SELECT wp_woocommerce_order_items.order_id As No_Commande
FROM  wp_woocommerce_order_items
LEFT JOIN 
    (
        SELECT meta_value As Prenom, post_id  -- <----- this
        FROM wp_postmeta
        WHERE meta_key = '_shipping_first_name'
    ) AS a
ON wp_woocommerce_order_items.order_id = a.post_id
WHERE  wp_woocommerce_order_items.order_id =2198 

An important comment from tmoschou:

As of Ansible 2.10, The documentation for ansible.builtin.copy says:
If you need variable interpolation in copied files, use the
ansible.builtin.template module. Using a variable in the content
field will result in unpredictable output.

For more details see this and an explanation

Original answer:

You could use the copy module, with the content parameter:

- copy: content="{{ your_json_feed }}" dest=/path/to/destination/file

The docs here: copy module

pkill NAMEofAPP

Non rooted marshmallow, termux & terminal emulator.

go to your project folder via cmd. run the following command

composer update

it will install the missing vendor folder and files in your project.

but in some cases, it gives an error like "Your configuration does not allow connection to ....." in cmd.

for that go to your composer.json file,

change "secure-http": true to "secure-http": false

but in some cases (as was in my case) you may not find such line in your file. for that do the following action:

change "config": {
        "preferred-install": "dist"
}

to

"config": {
    "preferred-install": "dist",
    "secure-http": false
}

and run again composer update command.

hope this will solve problem.

In Ubuntu i could run the following command:

  sudo apt install android-tools-adb

I was getting this error 2013 and none of the above preference changes did anything to fix the problem. I restarted mysql service and the problem went away.

It means XML is malformed or the response body is not XML document at all.

josonify works..but if you intend to just pass an array without the 'results' key, you can use json library from python. The following conversion works for me..

 import json

 @app.route('/test/json')
 def test_json():
 list = [
        {'a': 1, 'b': 2},
        {'a': 5, 'b': 10}
       ]
 return json.dumps(list))

What does the letter 'N' on a relationship line in an Entity Relationship diagram mean? Any number

M:N

M - ordinality - describes the minimum (ordinal vs mandatory)

N - cardinality - describes the miximum

1:N (n=0,1,2,3...) one to zero or more

M:N (m and n=0,1,2,3...) zero or more to zero or more (many to many)

1:1 one to one

Find more here: https://www.smartdraw.com/entity-relationship-diagram/

If you use Wordpress you can just use the wordpress build in function with the video id provided wp_get_attachment_metadata($videoID):

wp_get_attachment_metadata($videoID);

helped me a lot. thats why i'm posting it, although its just for wordpress users.

function getRangeDateString($timestamp) {
    if ($timestamp) {
        $currentTime=strtotime('today');
        // Reset time to 00:00:00
        $timestamp=strtotime(date('Y-m-d 00:00:00',$timestamp));
        $days=round(($timestamp-$currentTime)/86400);
        switch($days) {
            case '0';
                return 'Today';
                break;
            case '-1';
                return 'Yesterday';
                break;
            case '-2';
                return 'Day before yesterday';
                break;
            case '1';
                return 'Tomorrow';
                break;
            case '2';
                return 'Day after tomorrow';
                break;
            default:
                if ($days > 0) {
                    return 'In '.$days.' days';
                } else {
                    return ($days*-1).' days ago';
                }
                break;
        }
    }
}

On In Xcode 7

?<

or select Edit Scheme from Product > Scheme Menu

select Enable Zombie Objects form the Diagnostics tab

As alternative, if you prefer .xcconfig files you can read this article https://therealbnut.wordpress.com/2012/01/01/setting-xcode-4-0-environment-variables-from-a-script/

This error comes up when you try to clone a repository in a folder which still contains .git folder (Hidden folder).

If the earlier answers doesn't work then you can proceed with my answer. Hope it will solve your issue.

Open terminal & change the directory to the destination folder (where you want to clone).

Now type: ls -a

You may see a folder named .git.

You have to remove that folder by the following command: rm -rf .git

Now you are ready to clone your project.

$('#search_code').select2({
.
.
.
.
}).on("change", function (e) {
      var str = $("#s2id_search_code .select2-choice span").text();
      DOSelectAjaxProd(e.val, str);
});

You should execute script for install docker and launch it from command line:

brew install --cask docker
sudo -H pip3 install --upgrade pip3
open -a Docker
docker-compose ... 

after that docker-compose should work

Yes. For VB6, VBA (Excel), and VB.NET

Dir function loses focus easily when I handle and process files from other folders.

I've gotten better results with the component FileSystemObject.

Full example is given here:

http://www.xl-central.com/list-files-fso.html

Don't forget to set a reference in the Visual Basic Editor to Microsoft Scripting Runtime (by using Tools > References)

Give it a try!

The dynamic keyword is new to C# 4.0, and is used to tell the compiler that a variable's type can change or that it is not known until runtime. Think of it as being able to interact with an Object without having to cast it.

dynamic cust = GetCustomer();
cust.FirstName = "foo"; // works as expected
cust.Process(); // works as expected
cust.MissingMethod(); // No method found!

Notice we did not need to cast nor declare cust as type Customer. Because we declared it dynamic, the runtime takes over and then searches and sets the FirstName property for us. Now, of course, when you are using a dynamic variable, you are giving up compiler type checking. This means the call cust.MissingMethod() will compile and not fail until runtime. The result of this operation is a RuntimeBinderException because MissingMethod is not defined on the Customer class.

The example above shows how dynamic works when calling methods and properties. Another powerful (and potentially dangerous) feature is being able to reuse variables for different types of data. I'm sure the Python, Ruby, and Perl programmers out there can think of a million ways to take advantage of this, but I've been using C# so long that it just feels "wrong" to me.

dynamic foo = 123;
foo = "bar";

OK, so you most likely will not be writing code like the above very often. There may be times, however, when variable reuse can come in handy or clean up a dirty piece of legacy code. One simple case I run into often is constantly having to cast between decimal and double.

decimal foo = GetDecimalValue();
foo = foo / 2.5; // Does not compile
foo = Math.Sqrt(foo); // Does not compile
string bar = foo.ToString("c");

The second line does not compile because 2.5 is typed as a double and line 3 does not compile because Math.Sqrt expects a double. Obviously, all you have to do is cast and/or change your variable type, but there may be situations where dynamic makes sense to use.

dynamic foo = GetDecimalValue(); // still returns a decimal
foo = foo / 2.5; // The runtime takes care of this for us
foo = Math.Sqrt(foo); // Again, the DLR works its magic
string bar = foo.ToString("c");

Read more feature : http://www.codeproject.com/KB/cs/CSharp4Features.aspx

a possible solution in js

In case the WebSocket server initiative disconnects the ws link after a few minutes there no messages sent between the server and client.

1. client sends a custom ping message, to keep alive by using the keepAlive function

2. server ignore the ping message and response a custom pong message

var timerID = 0; 
function keepAlive() { 
    var timeout = 20000;  
    if (webSocket.readyState == webSocket.OPEN) {  
        webSocket.send('');  
    }  
    timerId = setTimeout(keepAlive, timeout);  
}  
function cancelKeepAlive() {  
    if (timerId) {  
        clearTimeout(timerId);  
    }  
}

I found this;

Excel VBA ComboBox Lists

from here;

vba- Can a combobox present more then one column on it's textbox part?

and this may help;

Populating ComboBoxes VBA

I added a sort of demo here;

Playing with populating boxes.xlsm

For gradle

compile('org.xxx:xxx:1.0-SNAPSHOT'){
    exclude module: 'log4j'
    exclude module: 'slf4j-log4j12'
}

Add this option: -std=c++11 while compiling your code

g++ -std=c++11 my_cpp_code.cpp

If you want to add SSL in your test environment, then you can use mkcert. Below I mentioned the GitHub URL.
https://github.com/FiloSottile/mkcert
And also below I mentioned sample nginx configuration for reverse proxy.

server {
        listen 80;
        server_name test.local;
        return 301 https://test.local$request_uri;
}
server {
  listen 443 ssl;
  server_name test.local;
  ssl_certificate /etc/nginx/ssl/test.local.pem;
  ssl_certificate_key /etc/nginx/ssl/test.local-key.pem;

   location / {
      proxy_set_header X-Real-IP $remote_addr;
      proxy_set_header X-Forwarded-For $remote_addr;
      proxy_set_header X-Client-Verify SUCCESS;
      proxy_set_header Host $http_host;
      proxy_set_header X-NginX-Proxy true;
      proxy_http_version 1.1;
      proxy_set_header Upgrade $http_upgrade;
      proxy_set_header Connection "upgrade";
      proxy_pass http://localhost:3000;
      proxy_redirect off;
      proxy_buffering off;
    }
}

Configure Fiddler as a 'reverse proxy' on Windows

(for Mac, see the link in Partizano's comment below)

I know there's already an answer suggesting this, however I want to provide the explanation and instructions for this that Telerik should have provided, and also cover some of the 'gotchas', so here goes:

What does it mean to configure Fiddler as a 'reverse proxy'?

• By default, Fiddler only monitors outgoing requests from the machine on which you're running Fiddler
• To monitor incoming requests, you need to configure Fiddler to work as a 'reverse proxy'
• What this means is that you need to set Fiddler up as a 'proxy' that will intercept incoming http requests that are sent to a specific port (8888) on the machine where you want to listen to the incoming requests. Fiddler will then forward those requests to the web server on the same machine by sending them to the usual port for http requests (usually port 80 or 443 for https). It's actually very quick and easy to do!
• The standard way to set this up with Fiddler is to get Fiddler to intercept all request sent to Port '8888' (since this won't normally be used by anything else, although you could just as easily use another port)
• You then need to use the registry editor to get Fiddler to forward any http requests that Fiddler receives on port 8888, so that they're forwarded to the standard http port (port 80, port 443 for an https request, or another custom port that your web server is set to listen on)

NOTE: For this to work, any request you want to intercept must be sent to port 8888

You do this by appending :8888 to your hostname, for example like this for an MVC route:

http://myhostname:8888/controller/action

Walkthrough

Ensure Fiddler can accept remote http requests on port 8888:

Run Fiddler as administrator Go to Tools > Fiddler Options > Connections, and ensure that 'Allow remote computers to connect' is checked, and 'Fiddler listens on port' is set to 8888:

Configure Fiddler to forward requests received on port 8888 to port 80

• Close Fiddler
• Start REGEDIT
• Create a new DWORD named ReverseProxyForPort inside HKEY_CURRENT_USER\SOFTWARE\Microsoft\Fiddler2.
  • Now set the DWORD value to the local port you'd like to re-route inbound traffic to (generally port 80 for a standard HTTP server)
• To do this, right-click the DWORD you created and select 'Modify'. Ensure 'Base' is set to 'Decimal' and enter '80' (or another port) as the 'Value data':

Ensure that port 8888 is opened on the firewall

• You must ensure that port 8888 is open to external requests (it won't be by default if your server is firewall-protected)

That's it! Fiddler should now be set up as a reverse proxy, to intercept all requests from port 8888 (so that you can view them in Fiddler), and it will then forward them to your web server to actually be handled.

Test a request

• Restart Fiddler
• To test that Fiddler is intercepting external requests, open a browser on the same machine where you've set up Fiddler as a reverse proxy. Navigate your browser to http://127.0.0.1:8888
• This tests making a basic request to to port 8888
• You should see the request intercepted by Fiddler
• Now you can test a request from another machine, for example by making a request from a browser on another machine like this (where 'remoteHostname' is a hostname on the machine where you've set up Fiddler as a reverse proxy) :

http://remoteHostname:8888/controller/action

• Alternatively, you can compose a request by using another instance of Fiddler on a remote machine, using a URL similar to the one above. This will allow you to make either a GET or a POST request.

IMPORTANT: Once you've finished viewing your request(s), go back to Tools > Fiddler Options > Connections and remove the 'Allow remote computers to connect' option, otherwise 3rd parties will be able to bounce traffic through your server

double priceG = Double.parseDouble(priceGal.getText().toString());

double valG = Double.parseDouble(volGal.toString());

double priceG = Double.parseDouble(priceGal.getText().toString());

double valG = Double.parseDouble(volGal.toString());

double priceG = Double.parseDouble(priceGal.getText().toString());

double valG = Double.parseDouble(volGal.toString());

it works. got to be repetitive.

This actually removes the contents from the list, but doesn't replace the old label with a new empty list:

del lst[:]

Here's an example:

lst1 = [1, 2, 3]
lst2 = lst1
del lst1[:]
print(lst2)

For the sake of completeness, the slice assignment has the same effect:

lst[:] = []

It can also be used to shrink a part of the list while replacing a part at the same time (but that is out of the scope of the question).

Note that doing lst = [] does not empty the list, just creates a new object and binds it to the variable lst, but the old list will still have the same elements, and effect will be apparent if it had other variable bindings.

To quickly add a Javadoc use following shortcut:

Windows: alt + shift + J

Mac: ? + Alt + J

Depending on selected context, a Javadoc will be printed. To create Javadoc written by OP, select corresponding method and hit the shotcut keys.

I'll try to keep this short, I've done this a few months ago for a game I was trying to build, it does a UDP "Client-Server" connection that acts like TCP, you can send (message) (message + object) using this. I've done some testing with it and it works just fine, feel free to modify it if needed.

An alternative way to code Brettski's answer, with which I otherwise agree entirely, might be

With New FileSystemObject
    If .FileExists(yourFilePath) Then
        .DeleteFile yourFilepath
    End If
End With

Same effect but fewer (well, none at all) variable declarations.

The FileSystemObject is a really useful tool and well worth getting friendly with. Apart from anything else, for text file writing it can actually sometimes be faster than the legacy alternative, which may surprise a few people. (In my experience at least, YMMV).

You could use the moment.js library.

Then simply:

var stringDate = '01-01-1970 00:03:44';
var momentDateObj = moment(stringDate);

Checkout their api also, helps with formatting, adding, subtracting (days, months, years, other moment objects).

I hope this helps.

Rhys

As early as possible in your application, require and configure dotenv.

require('dotenv').config()

If the image is part of the layout it might be "View.VISIBLE" but that doesn't mean it's within the confines of the visible screen. If that's what you're after; this will work:

Rect scrollBounds = new Rect();
scrollView.getHitRect(scrollBounds);
if (imageView.getLocalVisibleRect(scrollBounds)) {
    // imageView is within the visible window
} else {
    // imageView is not within the visible window
}

What is being returned is an anonymous type so create a new class with 2 fields

class BasicProjectInfo {
   string name;
   string id;
}

and return new BasicProjectInfo(pro.ProjectName, pro.ProjectId);. You method in this case will return a List<BasicProjectInfo>

<a href="mailto:[email protected]?subject=Request&body=Hi,%0DName:[your name] %0DGood day " target="_blank"></a>

Try adding %0D to break the line. This will definitely work.

Above code will display the following:

Hi,
Name:[your name] 
Good day

Regex.Matches(input, "true").Count

Thank you Joseph for your answer. However, in the method possiblyResizeChildOfContent(), the portion

else {
            // keyboard probably just became hidden
            frameLayoutParams.height = usableHeightSansKeyboard;
        }

was not working for me, as the lower portion of view became hidden. So I had to take a global variable restoreHeight, and in the constructor, I inserted the last line

restoreHeight = frameLayoutParams.height;

and then I replaced the former mentioned part with

else {
            // keyboard probably just became hidden
            frameLayoutParams.height = restoreHeight;
        }

But I have no idea why your code didn't work for me. It would be of great help, if someone can shed light on this.

I'm suspicious of the ActiveFileName property. According to the log4j javadoc, there isn't such a property on the TimeBasedRollingPolicy class. (No setActiveFileName or getActiveFileName methods.)

I don't know what specifying an unknown property would do, but it is possible that it will cause the containing object to be abandoned, and that could lead to the warnings that you saw.

Try leaving it out and seeing what happens.

Short Answer

Yes.

Explanation

It is a good practice since an element can be a part of different groups, and you may want specific elements to be a part of more than one group. The element can hold an infinite number of classes in HTML5, while in HTML4 you are limited by a specific length.

The following example will show you the use of multiple classes.

The first class makes the text color red.

The second class makes the background-color blue.

See how the DOM Element with multiple classes will behave, it will wear both CSS statements at the same time.

Result: multiple CSS statements in different classes will stack up.

You can read more about CSS Specificity.

CSS

.class1 {
    color:red;
}

.class2 {
    background-color:blue;
}

HTML

<div class="class1">text 1</div>
<div class="class2">text 2</div>
<div class="class1 class2">text 3</div>

Live demo

While the accepted answer isn't technically wrong, it doesn't answer the original question nor the follow up question in the comments, which was what I came here looking for. But I figured it out, so here goes.

If you want to find all Posts that have Users (and only the ones that have users) where the SQL would look like this:

SELECT * FROM posts INNER JOIN users ON posts.user_id = users.id

Which is semantically the same thing as the OP's original SQL:

SELECT * FROM posts, users WHERE posts.user_id = users.id

then this is what you want:

Posts.findAll({
  include: [{
    model: User,
    required: true
   }]
}).then(posts => {
  /* ... */
});

Setting required to true is the key to producing an inner join. If you want a left outer join (where you get all Posts, regardless of whether there's a user linked) then change required to false, or leave it off since that's the default:

Posts.findAll({
  include: [{
    model: User,
//  required: false
   }]
}).then(posts => {
  /* ... */
});

If you want to find all Posts belonging to users whose birth year is in 1984, you'd want:

Posts.findAll({
  include: [{
    model: User,
    where: {year_birth: 1984}
   }]
}).then(posts => {
  /* ... */
});

Note that required is true by default as soon as you add a where clause in.

If you want all Posts, regardless of whether there's a user attached but if there is a user then only the ones born in 1984, then add the required field back in:

Posts.findAll({
  include: [{
    model: User,
    where: {year_birth: 1984}
    required: false,
   }]
}).then(posts => {
  /* ... */
});

If you want all Posts where the name is "Sunshine" and only if it belongs to a user that was born in 1984, you'd do this:

Posts.findAll({
  where: {name: "Sunshine"},
  include: [{
    model: User,
    where: {year_birth: 1984}
   }]
}).then(posts => {
  /* ... */
});

If you want all Posts where the name is "Sunshine" and only if it belongs to a user that was born in the same year that matches the post_year attribute on the post, you'd do this:

Posts.findAll({
  where: {name: "Sunshine"},
  include: [{
    model: User,
    where: ["year_birth = post_year"]
   }]
}).then(posts => {
  /* ... */
});

I know, it doesn't make sense that somebody would make a post the year they were born, but it's just an example - go with it. :)

I figured this out (mostly) from this doc:

• http://docs.sequelizejs.com/en/latest/docs/models-usage/#eager-loading

change max_connections variable in postgresql.conf file located in /var/lib/pgsql/data or /usr/local/pgsql/data/

for counting:

$('.yourClass').length;

should work fine.

storing in a variable is as easy as:

var count = $('.yourClass').length;

Removing the name from your binding will make it apply to all endpoints, and should produce the desired results. As so:

<services>
  <service name="Service.IService">
    <clear />
    <endpoint binding="basicHttpBinding" contract="Service.IService" />
  </service>
</services>
<bindings>
  <basicHttpBinding>
    <binding maxBufferSize="2147483647" maxReceivedMessageSize="2147483647">
      <readerQuotas maxDepth="32" maxStringContentLength="2147483647"
        maxArrayLength="16348" maxBytesPerRead="4096" maxNameTableCharCount="16384" />
    </binding>
  </basicHttpBinding>
  <webHttpBinding>
    <binding maxBufferSize="2147483647" maxReceivedMessageSize="2147483647" />
  </webHttpBinding>
</bindings>

Also note that I removed the bindingConfiguration attribute from the endpoint node. Otherwise you would get an exception.

This same solution was found here : Problem with large requests in WCF

Microsoft Windows is the best platform for software development.

Reasoning: Microsoft spoils its developers with excellent and cheap development tools, the platform and its API's are well documented, the platform is evolving at a rappid rate which creates a lot of opportunities for developers, The OS has a large user base which is important for obvious commercial reasons, there is a big community of Windows developers, I haven't yet been fired for choosing Microsoft.

I know that this is an old subject, but I found the issue with xcode 12.3 and was related to an error while doing the CopyPlist of the main.Storyboard during compilation.

Actually, changing the build settings to "Legacy Build Setting" worked, but it is deprecated, so I discarded it because is a short term solution.

Check this:

With that setting, worked for me. Before I had "Copy plist".

#include<iostream>
using namespace std;

class A
{
    public:
        struct Assign
        {
            public:
                int a=10;
                float b=20.5;
            private:
                double c=30.0;
                long int d=40;
         };
         struct Assign ALT;
};

class B: public A
{
public:
    int x = 10;
private:
    float y = 20.8;
};

int main()
{
   B myobj;
   A obj;
   //cout<<myobj.a<<endl;
   //cout<<myobj.b<<endl;
   //cout<<obj.a<<endl;
   //cout<<obj.b<<endl;
   cout<<myobj.ALT.a<<endl;

    return 0;
}

    enter code here

To execute the stored procedures, use FromSql method which executes RAW SQL queries

e.g.

    var products= context.Products
        .FromSql("EXECUTE dbo.GetProducts")
        .ToList();

To use with parameters

    var productCategory= "Electronics";

    var product = context.Products
        .FromSql("EXECUTE dbo.GetProductByCategory {0}", productCategory)
        .ToList();

or

    var productCategory= new SqlParameter("productCategory", "Electronics");

    var product = context.Product
        .FromSql("EXECUTE dbo.GetProductByName  @productCategory", productCategory)
        .ToList();

There are certain limitations to execute RAW SQL queries or stored procedures. You can’t use it for INSERT/UPDATE/DELETE. if you want to execute INSERT, UPDATE, DELETE queries, use the ExecuteSqlCommand

    var categoryName = "Electronics";
    dataContext.Database
               .ExecuteSqlCommand("dbo.InsertCategory @p0", categoryName);

Regarding the format (mp4 or flv) decide which URL you want to use. Then use this tutorial to download the video and save it into a local directory.

Made a simple implementation of what I believe to be what you want to achieve. You can use the class later with the following arguments:

• int (milliseconds to wait until to run the code)
• bool (if true it returns instantly and runs the code after specified time on another thread)
• variable arguments (exactly what you'd feed to std::bind)

You can change std::chrono::milliseconds to std::chrono::nanoseconds or microseconds for even higher precision and add a second int and a for loop to specify for how many times to run the code.

Here you go, enjoy:

#include <functional>
#include <chrono>
#include <future>
#include <cstdio>

class later
{
public:
    template <class callable, class... arguments>
    later(int after, bool async, callable&& f, arguments&&... args)
    {
        std::function<typename std::result_of<callable(arguments...)>::type()> task(std::bind(std::forward<callable>(f), std::forward<arguments>(args)...));

        if (async)
        {
            std::thread([after, task]() {
                std::this_thread::sleep_for(std::chrono::milliseconds(after));
                task();
            }).detach();
        }
        else
        {
            std::this_thread::sleep_for(std::chrono::milliseconds(after));
            task();
        }
    }

};

void test1(void)
{
    return;
}

void test2(int a)
{
    printf("%i\n", a);
    return;
}

int main()
{
    later later_test1(1000, false, &test1);
    later later_test2(1000, false, &test2, 101);

    return 0;
}

Outputs after two seconds:

101

Did you try passwd -d root? Most likely, this will do what you want.

You can also manually edit /etc/shadow: (Create a backup copy. Be sure that you can log even if you mess up, for example from a rescue system.) Search for "root". Typically, the root entry looks similar to

root:$X$SK5xfLB1ZW:0:0...

There, delete the second field (everything between the first and second colon):

root::0:0...

Some systems will make you put an asterisk (*) in the password field instead of blank, where a blank field would allow no password (CentOS 8 for example)

root:*:0:0...

Save the file, and try logging in as root. It should skip the password prompt. (Like passwd -d, this is a "no password" solution. If you are really looking for a "blank password", that is "ask for a password, but accept if the user just presses Enter", look at the manpage of mkpasswd, and use mkpasswd to create the second field for the /etc/shadow.)

Thanks all for your replies. I wrote one myself. Please note that this uses jQuery.

Code snippet:

var myList = [_x000D_
  { "name": "abc", "age": 50 },_x000D_
  { "age": "25", "hobby": "swimming" },_x000D_
  { "name": "xyz", "hobby": "programming" }_x000D_
];_x000D_
_x000D_
// Builds the HTML Table out of myList._x000D_
function buildHtmlTable(selector) {_x000D_
  var columns = addAllColumnHeaders(myList, selector);_x000D_
_x000D_
  for (var i = 0; i < myList.length; i++) {_x000D_
    var row$ = $('<tr/>');_x000D_
    for (var colIndex = 0; colIndex < columns.length; colIndex++) {_x000D_
      var cellValue = myList[i][columns[colIndex]];_x000D_
      if (cellValue == null) cellValue = "";_x000D_
      row$.append($('<td/>').html(cellValue));_x000D_
    }_x000D_
    $(selector).append(row$);_x000D_
  }_x000D_
}_x000D_
_x000D_
// Adds a header row to the table and returns the set of columns._x000D_
// Need to do union of keys from all records as some records may not contain_x000D_
// all records._x000D_
function addAllColumnHeaders(myList, selector) {_x000D_
  var columnSet = [];_x000D_
  var headerTr$ = $('<tr/>');_x000D_
_x000D_
  for (var i = 0; i < myList.length; i++) {_x000D_
    var rowHash = myList[i];_x000D_
    for (var key in rowHash) {_x000D_
      if ($.inArray(key, columnSet) == -1) {_x000D_
        columnSet.push(key);_x000D_
        headerTr$.append($('<th/>').html(key));_x000D_
      }_x000D_
    }_x000D_
  }_x000D_
  $(selector).append(headerTr$);_x000D_
_x000D_
  return columnSet;_x000D_
}

<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>_x000D_
_x000D_
<body onLoad="buildHtmlTable('#excelDataTable')">_x000D_
  <table id="excelDataTable" border="1">_x000D_
  </table>_x000D_
</body>

It cannot be done. It is impossible.

You can delete the browser cache by setting these headers:

<?php
header("Expires: Tue, 01 Jan 2000 00:00:00 GMT");
header("Last-Modified: " . gmdate("D, d M Y H:i:s") . " GMT");
header("Cache-Control: no-store, no-cache, must-revalidate, max-age=0");
header("Cache-Control: post-check=0, pre-check=0", false);
header("Pragma: no-cache");
?>

You can also use INT_MAX:

http://www.cplusplus.com/reference/climits/

it's equivalent to using numeric_limits.

You pretty much can't set the value of found. Debugging optimized programs is rarely worth the trouble, the compiler can rearrange the code in ways that it'll in no way correspond to the source code (other than producing the same result), thus confusing debuggers to no end.

I believe you are looking for -maxdepth 1.

$.each(result, function(key, value) {
  console.log(key+ ':' + value);
});

Not sure what you meant, but you can permanently turn showing whitespaces on and off in Settings -> Editor -> General -> Appearance -> Show whitespaces.

Also, you can set it for a current file only in View -> Active Editor -> Show WhiteSpaces.

Edit:

Had some free time since it looks like a popular issue, I had written a plugin to inspect the code for such abnormalities. It is called Zero Width Characters locator and you're welcome to give it a try.

Calling /search/ should result in "you submitted nothing", but calling /search/?q= on the other hand should result in "you submitted u''"

Browsers have to add the q= even when it's empty, because they have to include all fields which are part of the form. Only if you do some DOM manipulation in Javascript (or a custom javascript submit action), you might get such a behavior, but only if the user has javascript enabled. So you should probably simply test for non-empty strings, e.g:

if request.GET.get('q'):
    message = 'You submitted: %r' % request.GET['q']
else:
    message = 'You submitted nothing!'

Xampp I guess you're using MySQL.

mysql_fetch_array($result);  

And make sure $result is not empty.

Actually Java does support associative arrays they are called dictionaries!

From python 3.5: merging and summing

Thanks to @tokeinizer_fsj that told me in a comment that I didn't get completely the meaning of the question (I thought that add meant just adding keys that eventually where different in the two dictinaries and, instead, i meant that the common key values should be summed). So I added that loop before the merging, so that the second dictionary contains the sum of the common keys. The last dictionary will be the one whose values will last in the new dictionary that is the result of the merging of the two, so I thing the problem is solved. The solution is valid from python 3.5 and following versions.

a = {
    "a": 1,
    "b": 2,
    "c": 3
}

b = {
    "a": 2,
    "b": 3,
    "d": 5
}

# Python 3.5

for key in b:
    if key in a:
        b[key] = b[key] + a[key]

c = {**a, **b}
print(c)

>>> c
{'a': 3, 'b': 5, 'c': 3, 'd': 5}

Reusable code

a = {'a': 1, 'b': 2, 'c': 3}
b = {'b': 3, 'c': 4, 'd': 5}


def mergsum(a, b):
    for k in b:
        if k in a:
            b[k] = b[k] + a[k]
    c = {**a, **b}
    return c


print(mergsum(a, b))

request.getRequestDispatcher(“url”) means the dispatch is relative to the current HTTP request.Means this is for chaining two servlets with in the same web application Example

RequestDispatcher reqDispObj = request.getRequestDispatcher("/home.jsp");

getServletContext().getRequestDispatcher(“url”) means the dispatch is relative to the root of the ServletContext.Means this is for chaining two web applications with in the same server/two different servers

Example

RequestDispatcher reqDispObj = getServletContext().getRequestDispatcher("/ContextRoot/home.jsp");

I would use:

public class Test {
    private static final Map<Integer, String> MY_MAP = createMap();

    private static Map<Integer, String> createMap() {
        Map<Integer, String> result = new HashMap<>();
        result.put(1, "one");
        result.put(2, "two");
        return Collections.unmodifiableMap(result);
    }
}

1. it avoids an anonymous class, which I personally consider to be a bad style, and avoid
2. it makes the creation of map more explicit
3. it makes map unmodifiable
4. as MY_MAP is constant, I would name it like constant

Release build did not work for me, however, I looked through my event viewer and Application log and saw that the Windows Service was throwing a security exception when it was trying to create an event log. I fixed this by adding the event source manually with administration access.

I followed this guide from Microsoft:

• open registry editor, run --> regedit
• Locate the following registry subkey: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog\Application
• Right-click the Application subkey, point to New, and then click Key.
• Type event source name used in your windows service for the key name.
• Close Registry Editor.