your startDate is first-day-of-month, In this case we can use

var endDate = moment(startDate).add(1, 'months').subtract(1, 'days');

Hope this helps!!

Do you mean compile it to JAR? NetBeans does that automatically, just do "clean and build" and look in the "dist" subdirectory of your project. There will be the JAR with "lib" folder containing the required libraries. These JAR + lib are enough to run the application.

If you disable "Compile on save" in the project properties, then it is no longer necessary to do "clean and build", simply "build" will suffice in most cases. This will save time if you want to change just a bit of the code and rebuild the JAR. However, note that NetBeans sometimes fails to handle dependencies and binary compatibility properly, which will lead to a faulty JAR throwing "no such method" or other obscure exceptions. Therefore, if you made a lot of changes since the last full rebuild and even remotely unsure that it will still work even if some classes aren't recompiled, then you must still do a full "clean and build" in order to get a perfectly working JAR.

To match either / or end of content, use (/|\z)

This only applies if you are not using multi-line matching (i.e. you're matching a single URL, not a newline-delimited list of URLs).

To put that with an updated version of what you had:

/(\S+?)/(\d{4}-\d{2}-\d{2})-(\d+)(/|\z)

Note that I've changed the start to be a non-greedy match for non-whitespace ( \S+? ) rather than matching anything and everything ( .* )

I suggest to have array of buffers and concat to resulting buffer only once at the end. Its easy to do manually, or one could use node-buffers

Another way, borrows a bit from Linkify but allows you to customize your handling.

Custom Span Class:

public class ClickSpan extends ClickableSpan {

    private OnClickListener mListener;

    public ClickSpan(OnClickListener listener) {
        mListener = listener;
    }

    @Override
    public void onClick(View widget) {
       if (mListener != null) mListener.onClick();
    }

    public interface OnClickListener {
        void onClick();
    }
}

Helper function:

public static void clickify(TextView view, final String clickableText, 
    final ClickSpan.OnClickListener listener) {

    CharSequence text = view.getText();
    String string = text.toString();
    ClickSpan span = new ClickSpan(listener);

    int start = string.indexOf(clickableText);
    int end = start + clickableText.length();
    if (start == -1) return;

    if (text instanceof Spannable) {
        ((Spannable)text).setSpan(span, start, end, Spanned.SPAN_EXCLUSIVE_EXCLUSIVE);
    } else {
        SpannableString s = SpannableString.valueOf(text);
        s.setSpan(span, start, end, Spanned.SPAN_EXCLUSIVE_EXCLUSIVE);
        view.setText(s);
    }

    MovementMethod m = view.getMovementMethod();
    if ((m == null) || !(m instanceof LinkMovementMethod)) {
        view.setMovementMethod(LinkMovementMethod.getInstance());
    }
}

Usage:

 clickify(textView, clickText,new ClickSpan.OnClickListener()
     {
        @Override
        public void onClick() {
            // do something
        }
    });

var express = require('express');    
var app = express();
    app.set('port', Config.port || 8881);
    var server = app.listen(app.get('port'), function() {
        console.log('Express server listening on port ' + server.address().port); 
    });

Express server listening on port 8881

For this html:

<div class="outer">
     <div class="inner"></div>
</div>

This selector should work:

$('.outer > .inner')

Here's a better way of doing things:

import java.util.ArrayList;
import java.util.Random;

public class facultyquotes
{
    private ArrayList<String> quotes;
    private String quote1;
    private String quote2;
    private String quote3;
    private String quote4;
    private String quote5;
    private String quote6;
    private String quote7;
    private String quote8;
    private String quote9;
    private String quote10;
    private String quote11;
    private String quote12;
    private String quote13;
    private String quote14;
    private String quote15;
    private String quote16;
    private String quote17;
    private String quote18;
    private String quote19;
    private String quote20;
    private String quote21;
    private String quote22;
    private String quote23;
    private String quote24;
    private String quote25;
    private String quote26;
    private String quote27;
    private String quote28;
    private String quote29;
    private String quote30;
    private int n;
    Random random;

    String teacher;


    facultyquotes()
    {
        quotes=new ArrayList<>();
        random=new Random();
        n=random.nextInt(3) + 0;
        quote1="life is hard";
        quote2="trouble shall come to an end";
        quote3="never give lose and never get lose";
        quote4="gamble with the devil and win";
        quote5="If you don’t build your dream, someone else will hire you to help them build theirs.";
        quote6="The first step toward success is taken when you refuse to be a captive of the environment in which you first find yourself.";
        quote7="When I dare to be powerful – to use my strength in the service of my vision, then it becomes less and less important whether I am afraid.";
        quote8="Whenever you find yourself on the side of the majority, it is time to pause and reflect";
        quote9="Great minds discuss ideas; average minds discuss events; small minds discuss people.";
        quote10="I have not failed. I’ve just found 10,000 ways that won’t work.";
        quote11="If you don’t value your time, neither will others. Stop giving away your time and talents. Value what you know & start charging for it.";
        quote12="A successful man is one who can lay a firm foundation with the bricks others have thrown at him.";
        quote13="No one can make you feel inferior without your consent.";
        quote14="Let him who would enjoy a good future waste none of his present.";
        quote15="Live as if you were to die tomorrow. Learn as if you were to live forever.";
        quote16="Twenty years from now you will be more disappointed by the things that you didn’t do than by the ones you did do.";
        quote17="The difference between a successful person and others is not a lack of strength, not a lack of knowledge, but rather a lack of will.";
        quote18="Success is about creating benefit for all and enjoying the process. If you focus on this & adopt this definition, success is yours.";
        quote19="I used to want the words ‘She tried’ on my tombstone. Now I want ‘She did it.";
        quote20="It is our choices, that show what we truly are, far more than our abilities.";
        quote21="You have to learn the rules of the game. And then you have to play better than anyone else.";
        quote22="The successful warrior is the average man, with laser-like focus.";
        quote23="Develop success from failures. Discouragement and failure are two of the surest stepping stones to success.";
        quote24="If you don’t design your own life plan, chances are you’ll fall into someone else’s plan. And guess what they have planned for you? Not much.";
        quote25="The question isn’t who is going to let me; it’s who is going to stop me.";
        quote26="If you genuinely want something, don’t wait for it – teach yourself to be impatient.";
        quote27="Don’t let the fear of losing be greater than the excitement of winning.";
        quote28="But man is not made for defeat. A man can be destroyed but not defeated.";
        quote29="There is nothing permanent except change.";
        quote30="You cannot shake hands with a clenched fist.";

        quotes.add(quote1);
        quotes.add(quote2);
        quotes.add(quote3);
        quotes.add(quote4);
        quotes.add(quote5);
        quotes.add(quote6);
        quotes.add(quote7);
        quotes.add(quote8);
        quotes.add(quote9);
        quotes.add(quote10);
        quotes.add(quote11);
        quotes.add(quote12);
        quotes.add(quote13);
        quotes.add(quote14);
        quotes.add(quote15);
        quotes.add(quote16);
        quotes.add(quote17);
        quotes.add(quote18);
        quotes.add(quote19);
        quotes.add(quote20);
        quotes.add(quote21);
        quotes.add(quote22);
        quotes.add(quote23);
        quotes.add(quote24);
        quotes.add(quote25);
        quotes.add(quote26);
        quotes.add(quote27);
        quotes.add(quote28);
        quotes.add(quote29);
        quotes.add(quote30);
    }

    public void setTeacherandQuote(String teacher)
    {
        this.teacher=teacher;
    }

    public void printRandomQuotes()
    {
        System.out.println(quotes.get(n++)+"  ~ "+ teacher);  
    }

    public void printAllQuotes()
    {
        for (String i : quotes)
        {
            System.out.println(i.toString());
        }
    }
}

Complete solution for mysql current month and current year, which makes use of indexing properly as well :)

-- Current month
SELECT id, timestampfield 
  FROM table1
 WHERE timestampfield >= DATE_SUB(CURRENT_DATE, INTERVAL DAYOFMONTH(CURRENT_DATE)-1 DAY)
   AND timestampfield <=  LAST_DAY(CURRENT_DATE);

-- Current year
SELECT id, timestampfield 
  FROM table1
 WHERE timestampfield >= DATE_SUB(CURRENT_DATE, INTERVAL DAYOFYEAR(CURRENT_DATE)-1 DAY)
   AND timestampfield <=  LAST_DAY(CURRENT_DATE);

You can accomplish what you want with either:

docker run -t -d <image-name>

or

docker run -i -d <image-name>

or

docker run -it -d <image-name>

The command parameter as suggested by other answers (i.e. tail -f /dev/null) is completely optional, and is NOT required to get your container to stay running in the background.

Also note the Docker documentation suggests that combining -i and -t options will cause it to behave like a shell.

See:

https://docs.docker.com/engine/reference/run/#foreground

Add to app.module.ts

import {MatIconModule} from '@angular/material/icon';

& link in your global index.html.

Sounds like you'd be better served by a singleton rather than a bunch of static methods

class Singleton
{
  /**
   * 
   * @var Singleton
   */
  private static $instance;

  private function __construct()
  {
    // Your "heavy" initialization stuff here
  }

  public static function getInstance()
  {
    if ( is_null( self::$instance ) )
    {
      self::$instance = new self();
    }
    return self::$instance;
  }

  public function someMethod1()
  {
    // whatever
  }

  public function someMethod2()
  {
    // whatever
  }
}

And then, in usage

// As opposed to this
Singleton::someMethod1();

// You'd do this
Singleton::getInstance()->someMethod1();

In my case, it's because the files already exist in the repository and I'm trying to ignore it.

These are the things I did to fix the issue:

• Copy the files to a temporary folder
• Remove them from my project folder.
• Commit the changes which remove those files from the repository
• Re-added those files to my project folder

By then, any changes I made on those files were ignored.

I think you can't ignore files that already exist on the repository.

Disabling and Enabling All Foreign Keys

CREATE PROCEDURE pr_Disable_Triggers_v2
    @disable BIT = 1
AS
    DECLARE @sql VARCHAR(500)
        ,   @tableName VARCHAR(128)
        ,   @tableSchema VARCHAR(128)

    -- List of all tables
    DECLARE triggerCursor CURSOR FOR
        SELECT  t.TABLE_NAME AS TableName
            ,   t.TABLE_SCHEMA AS TableSchema
        FROM    INFORMATION_SCHEMA.TABLES t
        ORDER BY t.TABLE_NAME, t.TABLE_SCHEMA

    OPEN    triggerCursor
    FETCH NEXT FROM triggerCursor INTO @tableName, @tableSchema
    WHILE ( @@FETCH_STATUS = 0 )
    BEGIN

        SET @sql = 'ALTER TABLE ' + @tableSchema + '.[' + @tableName + '] '
        IF @disable = 1
            SET @sql = @sql + ' DISABLE TRIGGER ALL'
        ELSE
            SET @sql = @sql + ' ENABLE TRIGGER ALL'

        PRINT 'Executing Statement - ' + @sql
        EXECUTE ( @sql )

        FETCH NEXT FROM triggerCursor INTO @tableName, @tableSchema

    END

    CLOSE triggerCursor
    DEALLOCATE triggerCursor

First, the foreignKeyCursor cursor is declared as the SELECT statement that gathers the list of foreign keys and their table names. Next, the cursor is opened and the initial FETCH statement is executed. This FETCH statement will read the first row's data into the local variables @foreignKeyName and @tableName. When looping through a cursor, you can check the @@FETCH_STATUS for a value of 0, which indicates that the fetch was successful. This means the loop will continue to move forward so it can get each successive foreign key from the rowset. @@FETCH_STATUS is available to all cursors on the connection. So if you are looping through multiple cursors, it is important to check the value of @@FETCH_STATUS in the statement immediately following the FETCH statement. @@FETCH_STATUS will reflect the status for the most recent FETCH operation on the connection. Valid values for @@FETCH_STATUS are:

0 = FETCH was successful
-1 = FETCH was unsuccessful
-2 = the row that was fetched is missing

Inside the loop, the code builds the ALTER TABLE command differently depending on whether the intention is to disable or enable the foreign key constraint (using the CHECK or NOCHECK keyword). The statement is then printed as a message so its progress can be observed and then the statement is executed. Finally, when all rows have been iterated through, the stored procedure closes and deallocates the cursor.

see Disabling Constraints and Triggers from MSDN Magazine

Here is how TextAngular (WYSISYG Editor) is doing it. I also found this to be the most consistent answer, which is NO REGEX.

@license textAngular
Author : Austin Anderson
License : 2013 MIT
Version 1.5.16
// turn html into pure text that shows visiblity
function stripHtmlToText(html)
{
    var tmp = document.createElement("DIV");
    tmp.innerHTML = html;
    var res = tmp.textContent || tmp.innerText || '';
    res.replace('\u200B', ''); // zero width space
    res = res.trim();
    return res;
}

Though I haven't personally tested, I have good reason to believe that the above stated AT COMMAND solution will work for XP, 2000 and Server 2003. Per my and Bryant's testing, we've identified that the same approach does not work with Vista or Windows Server 2008 -- most probably due to added security and the /interactive switch being deprecated.

However, I came across this article which demonstrates the use of PSTools from SysInternals (which was acquired by Microsoft in July, 2006.) I launched the command line via the following and suddenly I was running under the Local Admin Account like magic:

psexec -i -s cmd.exe

PSTools works well. It's a lightweight, well-documented set of tools which provides an appropriate solution to my problem.

Many thanks to those who offered help.

It depends on what you need the result for.

If you are sure that there's going to be only 1 row, use implicit cursor:

DECLARE
   v_foo foobar.foo%TYPE;
   v_bar foobar.bar%TYPE;
BEGIN
   SELECT foo,bar FROM foobar INTO v_foo, v_bar;
   -- Print the foo and bar values
   dbms_output.put_line('foo=' || v_foo || ', bar=' || v_bar);
EXCEPTION
   WHEN NO_DATA_FOUND THEN
     -- No rows selected, insert your exception handler here
   WHEN TOO_MANY_ROWS THEN
     -- More than 1 row seleced, insert your exception handler here
END;

If you want to select more than 1 row, you can use either an explicit cursor:

DECLARE
   CURSOR cur_foobar IS
     SELECT foo, bar FROM foobar;

   v_foo foobar.foo%TYPE;
   v_bar foobar.bar%TYPE;
BEGIN
   -- Open the cursor and loop through the records
   OPEN cur_foobar;
   LOOP
      FETCH cur_foobar INTO v_foo, v_bar;
      EXIT WHEN cur_foobar%NOTFOUND;
      -- Print the foo and bar values
      dbms_output.put_line('foo=' || v_foo || ', bar=' || v_bar);
   END LOOP;
   CLOSE cur_foobar;
END;

or use another type of cursor:

BEGIN
   -- Open the cursor and loop through the records
   FOR v_rec IN (SELECT foo, bar FROM foobar) LOOP       
   -- Print the foo and bar values
   dbms_output.put_line('foo=' || v_rec.foo || ', bar=' || v_rec.bar);
   END LOOP;
END;

I went through the answers here and elsewhere and still had issues. It turned that (like the op), I was running in kubernetes, and the app was fine, but kubernetes had an issue.

I forgot to have my app start based on my port environment variable. So, kubernetes/helm was telling it to run on 8443 and to liveness probe that, but it was running on some other port (like 8123) from my application.properties.

The kubernetes events (get events) showed the live-ness probe was failing, so kubernetes was killing the pod/app every 30 seconds or so.

echo "Subject: test" | /usr/sbin/sendmail [email protected]

This enables you to do it within one command line without having to echo a text file. This answer builds on top of @mti2935's answer. So credit goes there.

If you are using Webdriver then the item you are looking for is Selected.

Often times in the render of the checkbox doesn't actually apply the attribute checked unless specified.

So what you would look for in Selenium Webdriver is this

isChecked = e.findElement(By.tagName("input")).Selected;

As there is no Selected in WebDriver Java API, the above code should be as follows:

isChecked = e.findElement(By.tagName("input")).isSelected();

.c1 {
    height: unset;
}

The unset value added in CSS3 also solves this problem and it's even more universal method than auto or initial because it sets to every CSS property its default value and additionally its default behawior relative to its parent.

Note that initial value breaks aforementioned behavior.

From MDN:

Like these two other CSS-wide keywords, it can be applied to any CSS property, including the CSS shorthand all. This keyword resets the property to its inherited value if it inherits from its parent or to its initial value if not.

In the "root" __init__.py you can also do a

import sys
sys.path.insert(1, '.')

which should make both modules importable.

If you want to compare to a string literal you need to put it in (single) quotes:

<xsl:if test="Count != 'N/A'">

try this

 lblMsg.Text = @"Your search result for <b style=""color:green;"">" + txtCode.Text.Trim() + "</b> ";

Use '!' before the pip:

! pip install opencv-python

I added this and it worked fine for me.

web.api

config.EnableCors();

Then you will call the model using cors:

In a controller you will add at the top for global scope or on each class. It's up to you.

 [EnableCorsAttribute("http://localhost:51003/", "*", "*")]

Also, when your pushing this data to Angular it wants to see the .cshtml file being called as well, or it will push the data but not populate your view.

(function () {
    "use strict";
    angular.module('common.services',
        ['ngResource'])
    .constant('appSettings',
    {
        serverPath: "http://localhost:51003/About"
    });
}());

//Replace URL with the appropriate path from production server.

I hope this helps anyone out, it took me a while to understand Entity Framework, and why CORS is so useful.

Give this a try:

$date = "2017-10-01";


function date_checker($input,$devider){
  $output = false;

  $input = explode($devider, $input);
  $year = $input[0];
  $month = $input[1];
  $day = $input[2];

  if (is_numeric($year) && is_numeric($month) && is_numeric($day)) {
    if (strlen($year) == 4 && strlen($month) == 2 && strlen($day) == 2) {
      $output = true;
    }
  }
  return $output;
}

if (date_checker($date, '-')) {
  echo "The function is working";
}else {
  echo "The function isNOT working";
}

worth adding a lower in there so you don't find yourself wondering why the JPG's aren't showing up in your list.

os.path.splitext(filename)[1][1:].strip().lower()

Solution by recursion

function count(arr, value) {
   if (arr.length === 1)    {
      return arr[0] === value ? 1 : 0;
   } else {
      return (arr.shift() === value ? 1 : 0) + count(arr, value);
   }
}

count([1,2,2,3,4,5,2], 2); // 3

You cannot "erase" from a file in-place unless you need to erase the end. Either be content with an overwrite of an "empty" value, or read the parts of the file you care about and write it to another file.

I know this is an old thread, but I like my own plugin that can cycle through whitespace modes (none, selection, and all) via a single shortcut. It also provides menu items under a View | Whitespace menu.

Hopefully people will find this useful - it is used by a lot of people :)

foreach (DataGridViewRow row in dataGridView1.Rows)
        {
            for (int i = 0; i < dataGridView1.Columns.Count; i++)
            {
                String header = dataGridView1.Columns[i].HeaderText;
                //String cellText = row.Cells[i].Text;
                DataGridViewColumn column = dataGridView1.Columns[i]; // column[1] selects the required column 
                column.AutoSizeMode = DataGridViewAutoSizeColumnMode.AllCells; // sets the AutoSizeMode of column defined in previous line
                int colWidth = column.Width; // store columns width after auto resize           
                colWidth += 50; // add 30 pixels to what 'colWidth' already is
                this.dataGridView1.Columns[i].Width = colWidth; // set the columns width to the value stored in 'colWidth'
            }
        }

If you search for an image base-64 converter, you can embed some small image texture files as code into your @import url('') section of code. It will look like a lot of code; but at least all your data is now stored locally - rather than having to call a separate resource to load the image.

Example link: http://www.base64-image.de/

When I take a file from my own inventory of a simple icon in PNG format, and convert it to base-64, it looks like this in my CSS:

url('data:image/png;base64,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')

With your texture images, you'll want to employ a similar process.

You may want to disable browser caching for all pages rendered by controllers (i.e. HTML pages), but keep caching in place for resources such as scripts, style sheets, and images. If you're using MVC4+ bundling and minification, you'll want to keep the default cache durations for scripts and stylesheets (very long durations, since the cache gets invalidated based on a change to a unique URL, not based on time).

In MVC4+, to disable browser caching across all controllers, but retain it for anything not served by a controller, add this to FilterConfig.RegisterGlobalFilters:

filters.Add(new DisableCache());

Define DisableCache as follows:

class DisableCache : ActionFilterAttribute
{
    public override void OnResultExecuting(ResultExecutingContext filterContext)
    {
        filterContext.HttpContext.Response.Cache.SetCacheability(HttpCacheability.NoCache);
    }
}

I changed your solution, so that it works in all modern browsers:

css snippet:

-webkit-transition: height 1s ease-in-out;
-moz-transition: height 1s ease-in-out;
-ms-transition: height 1s ease-in-out;
-o-transition: height 1s ease-in-out;
transition: height 1s ease-in-out;

js snippet:

    var clone = $('#this').clone()
                .css({'position':'absolute','visibility':'hidden','height':'auto'})
                .addClass('slideClone')
                .appendTo('body');

    var newHeight = $(".slideClone").height();
    $(".slideClone").remove();
    $('#this').css('height',newHeight + 'px');

here's the full example http://jsfiddle.net/RHPQd/

Searching SQL Database objects is possible with SQL Server Management Studio (SSMS) with the following methods, with SSMS Object Search: object explorer details or T-SQL scripts as explained in following:

• Different ways to search for SQL Server database objects
• SQL Server Find Anything in Object Explorer in SSMS
• Search text with wildcards

Darkest Dark is the best dark theme. It also comes with different toolbar icon shapes. Here's the link :

https://marketplace.eclipse.org/content/darkest-dark-theme

Hope you like it.

Here is a vbs script that was passed down to me:

Set servicelist = GetObject("winmgmts:").InstancesOf ("Win32_Service")

for each service in servicelist
    sname = lcase(service.name)
    If sname = "NameOfMyService" Then 
        msgbox(sname)
        service.delete ' the internal name of your service
    end if
next

In MS Windows the temporary directory is set by the environment variable TEMP. In XP, the temporary directory was set per-user as Local Settings\Temp.

If you change your TEMP environment variable to C:\temp, then you get the same when you run :

System.out.println(System.getProperty("java.io.tmpdir"));

I review your url in use:

https://www.facebook.com/sharer/sharer.php?s=100&p[title]=EXAMPLE&p[summary]=EXAMPLE&p[url]=EXAMPLE&p[images][0]=EXAMPLE

and see this differences:

1. The sharer URL not is same.
2. The strings are in different order. ( Do not know if this affects ).

I use this URL string:

http://www.facebook.com/sharer.php?s=100&p[url]=http://www.example.com/&p[images][0]=/images/image.jpg&p[title]=Title&p[summary]=Summary

In the "title" and "summary" section, I use the php function urlencode(); like this:

<?php echo urlencode($detail->title); ?>

And working fine for me.

Open up SQL Server Configuration Manager (search for it in the Start menu). Click on SQL Server Services. The instance name of SQL Server is in parenthesis inline with SQL Server service. If it says MSSQLSERVER, then it's the default instance. To connect to it in Management Studio, just type . (dot) OR (local) and click Connect. If the instance name is different, then use .\[instance name] to connect to it (for example if the instance name is SQL2008, connect to .\SQL2008).

Also make sure SQL Server and SQL Server Browser services are running, otherwise you won't be able to connect.

Edit:

Here's a screenshot of how it looks like on my machine. In this case, I have two instances installed: SQLExpress and SQL2008.

Note that I don't recommend a fixed IP for containers in Docker unless you're doing something that allows routing from outside to the inside of your container network (e.g. macvlan). DNS is already there for service discovery inside of the container network and supports container scaling. And outside the container network, you should use exposed ports on the host. With that disclaimer, here's the compose file you want:

version: '2'

services:
  mysql:
    container_name: mysql
    image: mysql:latest
    restart: always
    environment:
      - MYSQL_ROOT_PASSWORD=root
    ports:
     - "3306:3306"
    networks:
      vpcbr:
        ipv4_address: 10.5.0.5

  apigw-tomcat:
    container_name: apigw-tomcat
    build: tomcat/.
    ports:
     - "8080:8080"
     - "8009:8009"
    networks:
      vpcbr:
        ipv4_address: 10.5.0.6
    depends_on:
     - mysql

networks:
  vpcbr:
    driver: bridge
    ipam:
     config:
       - subnet: 10.5.0.0/16
         gateway: 10.5.0.1

Most people know by now that System.Reflection.Assembly.LoadWithPartialName is deprecated, but it turns out that Add-Type -AssemblyName Microsoft.VisualBasic does not behave much better than LoadWithPartialName:

Rather than make any attempt to parse your request in the context of your system, [Add-Type] looks at a static, internal table to translate the "partial name" to a "full name".

If your "partial name" doesn't appear in their table, your script will fail.

If you have multiple versions of the assembly installed on your computer, there is no intelligent algorithm to choose between them. You are going to get whichever one appears in their table, probably the older, outdated one.

If the versions you have installed are all newer than the obsolete one in the table, your script will fail.

Add-Type has no intelligent parser of "partial names" like .LoadWithPartialNames.

What Microsoft's .Net teams says you're actually supposed to do is something like this:

Add-Type -AssemblyName 'Microsoft.VisualBasic, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a'

Or, if you know the path, something like this:

Add-Type -Path 'C:\WINDOWS\Microsoft.Net\assembly\GAC_MSIL\Microsoft.VisualBasic\v4.0_10.0.0.0__b03f5f7f11d50a3a\Microsoft.VisualBasic.dll'

That long name given for the assembly is known as the strong name, which is both unique to the version and the assembly, and is also sometimes known as the full name.

But this leaves a couple questions unanswered:

1. How do I determine the strong name of what's actually being loaded on my system with a given partial name?

   [System.Reflection.Assembly]::LoadWithPartialName($TypeName).Location; [System.Reflection.Assembly]::LoadWithPartialName($TypeName).FullName;

These should also work:

Add-Type -AssemblyName $TypeName -PassThru | Select-Object -ExpandProperty Assembly | Select-Object -ExpandProperty FullName -Unique

2. If I want my script to always use a specific version of a .dll but I can't be certain of where it's installed, how do I determine what the strong name is from the .dll?

   [System.Reflection.AssemblyName]::GetAssemblyName($Path).FullName;

Or:

Add-Type $Path -PassThru | Select-Object -ExpandProperty Assembly | Select-Object -ExpandProperty FullName -Unique

3. If I know the strong name, how do I determine the .dll path?

   [Reflection.Assembly]::Load('Microsoft.VisualBasic, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a').Location;

4. And, on a similar vein, if I know the type name of what I'm using, how do I know what assembly it's coming from?

   [Reflection.Assembly]::GetAssembly([Type]).Location [Reflection.Assembly]::GetAssembly([Type]).FullName

5. How do I see what assemblies are available?

I suggest the GAC PowerShell module. Get-GacAssembly -Name 'Microsoft.SqlServer.Smo*' | Select Name, Version, FullName works pretty well.

6. How can I see the list that Add-Type uses?

This is a bit more complex. I can describe how to access it for any version of PowerShell with a .Net reflector (see the update below for PowerShell Core 6.0).

First, figure out which library Add-Type comes from:

Get-Command -Name Add-Type | Select-Object -Property DLL

Open the resulting DLL with your reflector. I've used ILSpy for this because it's FLOSS, but any C# reflector should work. Open that library, and look in Microsoft.Powershell.Commands.Utility. Under Microsoft.Powershell.Commands, there should be AddTypeCommand.

In the code listing for that, there is a private class, InitializeStrongNameDictionary(). That lists the dictionary that maps the short names to the strong names. There's almost 750 entries in the library I've looked at.

Update: Now that PowerShell Core 6.0 is open source. For that version, you can skip the above steps and see the code directly online in their GitHub repository. I can't guarantee that that code matches any other version of PowerShell, however.

Update 2: Powershell 7+ does not appear to have the hash table lookup any longer. Instead they use a LoadAssemblyHelper() method which the comments call "the closest approximation possible" to LoadWithPartialName. Basically, they do this:

loadedAssembly = Assembly.Load(new AssemblyName(assemblyName));

Now, the comments also say "users can just say Add-Type -AssemblyName Forms (instead of System.Windows.Forms)". However, that's not what I see in Powershell v7.0.3 on Windows 10 2004.

# Returns an error
Add-Type -AssemblyName Forms

# Returns an error
[System.Reflection.Assembly]::Load([System.Reflection.AssemblyName]::new('Forms'))

# Works fine
Add-Type -AssemblyName System.Windows.Forms

# Works fine
[System.Reflection.Assembly]::Load([System.Reflection.AssemblyName]::new('System.Windows.Forms'))

So the comments appear to be a bit of a mystery.

I don't know exactly what the logic is in Assembly.Load(AssemblyName) when there is no version or public key token specified. I would expect that this has many of the same problems that LoadWithPartialName does like potentially loading the wrong version of the assembly if you have multiple installed.

There are no PHP interpreters that I know of for Android or IOS (or WebOS or BlackBerryOS).

If you want to run a web site as an app on a mobile device or tablet as a native application, all functionality needs to be in Javascript and wrapped with a library like PhoneGap or Titanium. Android and IOS web apps are both able to use local storage databases where data can be kept until a network connection is made. Any server-side logic would require a call out to your web server and an active internet connection on the device.

"Not Possible". You can use a function instead of the stored procedure.

The above code didn't work for me. The following approach worked.

Create an Intent object with appropriate info and then check if the Intent is callable or not using the following function:

private boolean isCallable(Intent intent) {  
        List<ResolveInfo> list = getPackageManager().queryIntentActivities(intent,   
        PackageManager.MATCH_DEFAULT_ONLY);  
        return list.size() > 0;  
}

On instances of object you also have the:

__class__

attribute. Here is a sample taken from Python 3.3 console

>>> str = "str"
>>> str.__class__
<class 'str'>
>>> i = 2
>>> i.__class__
<class 'int'>
>>> class Test():
...     pass
...
>>> a = Test()
>>> a.__class__
<class '__main__.Test'>

Beware that in python 3.x and in New-Style classes (aviable optionally from Python 2.6) class and type have been merged and this can sometime lead to unexpected results. Mainly for this reason my favorite way of testing types/classes is to the isinstance built in function.

This kind of depends on what you want to do with the results. If you're just after the numbers, a set-based option would be a numbers table - which comes in handy for all sorts of things.

For MSSQL 2005+, you can use a recursive CTE to generate a numbers table inline:

;WITH Numbers (N) AS (
    SELECT 1 UNION ALL
    SELECT 1 + N FROM Numbers WHERE N < 500 
)
SELECT N FROM Numbers
OPTION (MAXRECURSION 500)

This data is JSON! You can deserialize it using the built-in json module if you're on Python 2.6+, otherwise you can use the excellent third-party simplejson module.

import json    # or `import simplejson as json` if on Python < 2.6

json_string = u'{ "id":"123456789", ... }'
obj = json.loads(json_string)    # obj now contains a dict of the data

parseInt(yourNumber)=== parseFloat(yourNumber)

The type attribute is used to define the MIME type within the HTML document. Depending on what DOCTYPE you use, the type value is required in order to validate the HTML document.

The language attribute lets the browser know what language you are using (Javascript vs. VBScript) but is not necessarily essential and, IIRC, has been deprecated.

You need to use the various Bootstrap 4 centering methods...

• Use text-center for inline elements.
• Use justify-content-center for flexbox elements (ie; form-inline)

https://codeply.com/go/Am5LvvjTxC

Also, to offset the column, the col-sm-* must be contained within a .row, and the .row must be in a container...

<section id="cover">
    <div id="cover-caption">
        <div id="container" class="container">
            <div class="row">
                <div class="col-sm-10 offset-sm-1 text-center">
                    <h1 class="display-3">Welcome to Bootstrap 4</h1>
                    <div class="info-form">
                        <form action="" class="form-inline justify-content-center">
                            <div class="form-group">
                                <label class="sr-only">Name</label>
                                <input type="text" class="form-control" placeholder="Jane Doe">
                            </div>
                            <div class="form-group">
                                <label class="sr-only">Email</label>
                                <input type="text" class="form-control" placeholder="[email protected]">
                            </div>
                            <button type="submit" class="btn btn-success ">okay, go!</button>
                        </form>
                    </div>
                    <br>

                    <a href="#nav-main" class="btn btn-secondary-outline btn-sm" role="button">?</a>
                </div>
            </div>
        </div>
    </div>
</section>

I think you hit the same issue as discussed in this post. You forgot to escape your \ character.

You may find it more readable to reverse your logic and use an else statement with an empty if.

if($some_variable === 'uk' || $another_variable === 'in'){}

else {
    // This occurs when neither of the above are true
}

To enable GZIP compression, you need to modify the configuration of the embedded Tomcat instance. To do so, you declare a EmbeddedServletContainerCustomizer bean in your Java configuration and then register a TomcatConnectorCustomizer with it.

For example:

@Bean
public EmbeddedServletContainerCustomizer servletContainerCustomizer() {
    return new EmbeddedServletContainerCustomizer() {
        @Override
        public void customize(ConfigurableEmbeddedServletContainerFactory factory) {
            ((TomcatEmbeddedServletContainerFactory) factory).addConnectorCustomizers(new TomcatConnectorCustomizer() {
                @Override
                public void customize(Connector connector) {
                    AbstractHttp11Protocol httpProtocol = (AbstractHttp11Protocol) connector.getProtocolHandler();
                    httpProtocol.setCompression("on");
                    httpProtocol.setCompressionMinSize(64);
                }
            });
        }
    };
}

See the Tomcat documentation for more details on the various compression configuration options that are available.

You say that you want to selectively enable compression. Depending on your selection criteria, then the above approach may be sufficient. It enables you to control compression by the request's user-agent, the response's size, and the response's mime type.

If this doesn't meet your needs then I believe you will have to perform the compression in your controller and return a byte[] response with a gzip content-encoding header.

Some improved version with max lvl to go down in directory and option to exclude folders:

using System;
using System.IO;

class MainClass {
  public static void Main (string[] args) {

    var dir = @"C:\directory\to\print";
    PrintDirectoryTree(dir, 2, new string[] {"folder3"});
  }


  public static void PrintDirectoryTree(string directory, int lvl, string[] excludedFolders = null, string lvlSeperator = "")
  {
    excludedFolders = excludedFolders ?? new string[0];

    foreach (string f in Directory.GetFiles(directory))
    {
        Console.WriteLine(lvlSeperator+Path.GetFileName(f));
    } 

    foreach (string d in Directory.GetDirectories(directory))
    {
        Console.WriteLine(lvlSeperator + "-" + Path.GetFileName(d));

        if(lvl > 0 && Array.IndexOf(excludedFolders, Path.GetFileName(d)) < 0)
        {
          PrintDirectoryTree(d, lvl-1, excludedFolders, lvlSeperator+"  ");
        }
    }
  }
}

input directory:

-folder1
  file1.txt
  -folder2
    file2.txt
    -folder5
      file6.txt
  -folder3
    file3.txt
  -folder4
    file4.txt
    file5.txt

output of the function (content of folder5 is excluded due to lvl limit and content of folder3 is excluded because it is in excludedFolders array):

-folder1
  file1.txt
  -folder2
    file2.txt
    -folder5
  -folder3
  -folder4
    file4.txt
    file5.txt

I faced the same issue with a Foundation menu. align-self: center; didn't work for me.

My solution was to wrap the image with a <div style="display: inline-table;">...</div>

An .xsd file is called an XML schema. Via an XML schema, we may require a certain structure in a given XML - which elements in which order, how many times, with which attributes, how they are nested, etc. If we have a schema for our XML input, we can verify that it contains the data we need it to contain, and nothing else, with a few lines invoking a schema validator.

Maybe this will help for beginners

<!doctype html>
<html lang="en" ng-app>
  <head>
    <meta charset="utf-8">
    <title></title>
    <link rel="icon" href="favicon.ico">
    <link rel="stylesheet" href="custom.css">
  </head>
  <body>
    <div ng-include src="'view/01.html'"></div>
    <div ng-include src="'view/02.html'"></div>
    <script src="angular.min.js"></script>
  </body>
</html>

If you have a named container then it can be started by running

docker container start container_name

where container_name is name of the container that must be given at the time of creating container. You can replace container_name with the container id in case the container is not named. The container ID can be found by running:

docker ps -a

This should work

SELECT EXTRACTVALUE(column_name, '/DCResponse/ContextData/Decision') FROM traptabclob;

I have assumed the ** were just for highlighting?

This Android library handles the case changes in KitKat(including the oldere versions - 2.1+):
https://github.com/iPaulPro/aFileChooser

Use the String path = FileUtils.getPath(context, uri) to convert the returned Uri to a path string useable on all OS version. See more about it here: https://stackoverflow.com/a/20559175/860488

defer can only be used in <script> tag for external script inclusion. Hence it is advised to be used in the <script>-tags in the <head>-section.

Use a Queue

Queue<String> qe=new LinkedList<String>();

qe.add("a");
qe.add("b");
qe.add("c");
qe.add("d");

System.out.println(qe.poll()); //returns a
System.out.println(qe.poll()); //returns b
System.out.println(qe.poll()); //returns c
System.out.println(qe.poll()); //returns d

There's five simple methods of a Queue

• element() -- Retrieves, but does not remove, the head of this queue.

• offer(E o) -- Inserts the specified element into this queue, if
  possible.

• peek() -- Retrieves, but does not remove, the head of this queue, returning null if this queue is empty.

• poll() -- Retrieves and removes the head of this queue, or null if this queue is empty.

• remove() -- Retrieves and removes the head of this queue.

There is nothing wrong with your code. It should list all of the files and directories directly contained by the nominated directory.

The problem is most likely one of the following:

• The "." directory is not what you expect it to be. The "." pathname actually means the "current directory" or "working directory" for the JVM. You can verify what directory "." actually is by printing out dir.getCanonicalPath().

• You are misunderstanding what dir.listFiles() returns. It doesn't return all objects in the tree beneath dir. It only returns objects (files, directories, symlinks, etc) that are directly in dir.

The ".classpath" file suggests that you are looking at an Eclipse project directory, and Eclipse projects are normally configured with the Java files in a subdirectory such as "./src". I wouldn't expect to see any Java source code in the "." directory.

Can anyone explain to me why src isn't the current folder?"

Assuming that you are launching an application in Eclipse, then the current folder defaults to the project directory. You can change the default current directory via one of the panels in the Launcher configuration wizard.

Store their UserId and a RememberMeToken. When they login with remember me checked generate a new RememberMeToken (which invalidate any other machines which are marked are remember me).

When they return look them up by the remember me token and make sure the UserId matches.

I think this issue following model class wrong import.

    import org.springframework.data.annotation.Id;

Normally, it should be:

    import javax.persistence.Id;

If you're working with ES6 You can use a set:

function arrayHas( array, element ) {
    const s = new Set(array);
    return s.has(element)
}

This should be more performant than just about any other method

NPlot is a pretty good simple open source 2D plotting API. Unfortunately, the web site is down. I don't know if this is just temporary or not. I haven't heard of any bad news. It may come back up.

http://www.nplot.com

Here is an article describing it:

http://aspnet.4guysfromrolla.com/articles/072507-1.aspx

The previous article uses VB.NET, but obviously this will work with C#.

Again, not sure why nplot's site is not currently working but it is a somewhat popular plotting API that I've used in the past. I post it for your information and in case of the likely event nplot will be back up soon. :)

Edit:

Thanks to a Hosam Aly, it looks like the SourceForge project can still be accessed here:

http://sourceforge.net/projects/nplot

I found the same issue and tried everything. I have two different apps, one in objective-C and one in swift - both have the same problem. The error message comes in the debugger and the screen goes black after the first photo. This only happens in iOS >= 8.0, obviously it is a bug.

I found a difficult workaround. Shut off the camera controls with imagePicker.showsCameraControls = false and create your own overlayView that has the missing buttons. There are various tutorials around how to do this. The strange error message stays, but at least the screen doesn't go black and you have a working app.

Use Val(txtPrice.text)

I would also allow only number and the dot char by inserting some validation code in the key press event of the price text box.

You found the way: create a function instead of an alias. The C shell has a mechanism for doing arguments to aliases, but bash and the Korn shell don't, because the function mechanism is more flexible and offers the same capability.

another way to do is get the UriInfo instead of all the QueryParam

Then you will be able to get the queryParam as per needed in your code

@GET
@Path("/query")
public Response getUsers(@Context UriInfo info) {

    String param_1 = info.getQueryParameters().getFirst("param_1");
    String param_2 = info.getQueryParameters().getFirst("param_2");


    return Response ;

}

No, this is not supported in MySQL stored routine syntax.

Feel free to submit a feature request at bugs.mysql.com.

You can also try these:

<div>some <span class="blink">text</span> are <span class="blink">blinking</span></div>
<button onclick="startBlink()">blink</button>
<button onclick="stopBlink()">no blink</button>

<script>
  function startBlink(){
    window.blinker = setInterval(function(){
        if(window.blink){
           $('.blink').css('color','blue');
           window.blink=false;
         }
        else{
            $('.blink').css('color','white');
            window.blink = true;
        }
    },500);
  }

  function stopBlink(){
    if(window.blinker) clearInterval(window.blinker);
  } 
</script>

  <div class="item">
  <img src="yamahdi1.jpg" alt="pepsi" width="50" height="58">
  <img src="yamahdi.jpg" alt="pepsi" width="50" height="58">
  <div class="item-overlay top"></div>

css:

.item img {

  -moz-transition: all 0.3s;
  -webkit-transition: all 0.3s;
  transition: all 0.3s;
}
.item img:hover {
  -moz-transform: scale(1.1);
  -webkit-transform: scale(1.1);
  transform: scale(1.1);
}

Just in case if for example you need to put a min date, the last 3 months and max date next 3 months

$('#id_your_date').datepicker({ 
   maxDate: '+3m',
   minDate: '-3m'
 });

Have you tried using the WebClient class?

you should be able to use

string result = "";
using (var client = new WebClient())
{
    client.Headers[HttpRequestHeader.ContentType] = "application/json"; 
    result = client.UploadString(url, "POST", json);
}
Console.WriteLine(result);

Documentation at

http://msdn.microsoft.com/en-us/library/system.net.webclient%28v=vs.110%29.aspx

http://msdn.microsoft.com/en-us/library/d0d3595k%28v=vs.110%29.aspx

And you can use %stylesheets% (assetic feature) tag:

{% stylesheets
    "@MainBundle/Resources/public/colorbox/colorbox.css"
    "%kerner.root_dir%/Resources/css/main.css"
%}
<link type="text/css" rel="stylesheet" media="all" href="{{ asset_url }}" />
{% endstylesheets %}

You can write path to css as parameter (%parameter_name%).

More about this variant: http://symfony.com/doc/current/cookbook/assetic/asset_management.html

If you don't want to convert.Just use;

 bool _status = status == "1" ? true : false;

Perhaps you will return the values as you want.

Just figured it out-click anywhere in the table, then go to the tabs at the top of the page and select Options-from there you'll see a Change Data Source selection.

public static Stream ToStream(this Image image)
{
     var stream = new MemoryStream();

     image.Save(stream, image.RawFormat);
     stream.Position = 0;

     return stream;
 }

Here is how I do it:

app.directive('example', function() {

    return function(scope, element, attrs) {
        angular.element(document).ready(function() {
                //MANIPULATE THE DOM
        });
    };

});

Detach is unnecessary.

The answer (as of 2013) is simple:

$('#parentNode').append($('#childNode'));

According to http://api.jquery.com/append/

You can also select an element on the page and insert it into another:

$('.container').append($('h2'));

If an element selected this way is inserted into a single location elsewhere in the DOM, it will be moved into the target (not cloned).

Note: Egg packaging has been superseded by Wheel packaging.

Same concept as a .jar file in Java, it is a .zip file with some metadata files renamed .egg, for distributing code as bundles.

Specifically: The Internal Structure of Python Eggs

A "Python egg" is a logical structure embodying the release of a specific version of a Python project, comprising its code, resources, and metadata. There are multiple formats that can be used to physically encode a Python egg, and others can be developed. However, a key principle of Python eggs is that they should be discoverable and importable. That is, it should be possible for a Python application to easily and efficiently find out what eggs are present on a system, and to ensure that the desired eggs' contents are importable.

The .egg format is well-suited to distribution and the easy uninstallation or upgrades of code, since the project is essentially self-contained within a single directory or file, unmingled with any other projects' code or resources. It also makes it possible to have multiple versions of a project simultaneously installed, such that individual programs can select the versions they wish to use.

This is what worked for me:

python -m site --user-site

spin12.setLayoutParams(new LinearLayout.LayoutParams(200, 120));

spin12 is your spinner and 200,120 is width and height for your spinner.

You can deploy your angular application on github using angular-cli-ghpages

check out the link to find how to deploy using this cli.

the deployed website will be stored in some branch in github typically

gh-pages

use can clone the git branch and use it like static website in your server

@Ahmed

Below is code that specifies fields from a named range for insertion into MS Access. The nice thing about this code is that you can name your fields in Excel whatever the hell you want (If you use * then the fields have to match exactly between Excel and Access) as you can see I have named an Excel column "Haha" even though the Access column is called "dte".

Sub test()
    dbWb = Application.ActiveWorkbook.FullName
    dsh = "[" & Application.ActiveSheet.Name & "$]" & "Data2"  'Data2 is a named range


sdbpath = "C:\Users\myname\Desktop\Database2.mdb"
sCommand = "INSERT INTO [main] ([dte], [test1], [values], [values2]) SELECT [haha],[test1],[values],[values2] FROM [Excel 8.0;HDR=YES;DATABASE=" & dbWb & "]." & dsh

Dim dbCon As New ADODB.Connection
Dim dbCommand As New ADODB.Command

dbCon.Open "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" & sdbpath & "; Jet OLEDB:Database Password=;"
dbCommand.ActiveConnection = dbCon

dbCommand.CommandText = sCommand
dbCommand.Execute

dbCon.Close


End Sub

Select view>>Output to open output window.

In the output window, you can see the result

Another option is replacing double quotes with single quotes if you don't mind whatever it is. But I don't mention this one:

<option value='"asd'>test</option>

I mention this one:

<option value="'asd">test</option>

In my case I used this solution.

Don’t overthink what a Namespace is.

Namespace is basically just a Class prefix (like directory in Operating System) to ensure the Class path uniqueness.

Also just to make things clear, the use statement is not doing anything only aliasing your Namespaces so you can use shortcuts or include Classes with the same name but different Namespace in the same file.

E.g:

// You can do this at the top of your Class
use Symfony\Component\Debug\Debug;

if ($_SERVER['APP_DEBUG']) {
    // So you can utilize the Debug class it in an elegant way
    Debug::enable();
    // Instead of this ugly one
    // \Symfony\Component\Debug\Debug::enable();
}

If you want to know how PHP Namespaces and autoloading (the old way as well as the new way with Composer) works, you can read the blog post I just wrote on this topic: https://enterprise-level-php.com/2017/12/25/the-magic-behind-autoloading-php-files-using-composer.html

You can use Environment.GetCommandLineArgs() to obtain the arguments and Environment.CommandLine to obtain the actual command line as entered.

Also, you can use Assembly.GetEntryAssembly() or Process.GetCurrentProcess().

However, when debugging, you should be careful as this final example may give your debugger's executable name (depending on how you attach the debugger) rather than your executable, as may the other examples.

Another oh-so-easy mistake, which was the source of the problem for me: I’d written my own shouldComponentUpdate method, which didn’t check the new state change I’d added.

Late to the game maybe but I stumbled upon this semantics issue while trying to make a REST API.

To expand a little on Wrikken's answer, I think you could use either 409 Conflict or 403 Forbidden depending on the situation - in short, use a 403 error when the user can do absolutely nothing to resolve the conflict and complete the request (e.g. they can't send a DELETE request to explicitly remove the resource), or use 409 if something could possibly be done.

10.4.4 403 Forbidden

The server understood the request, but is refusing to fulfill it. Authorization will not help and the request SHOULD NOT be repeated. If the request method was not HEAD and the server wishes to make public why the request has not been fulfilled, it SHOULD describe the reason for the refusal in the entity. If the server does not wish to make this information available to the client, the status code 404 (Not Found) can be used instead.

Nowadays, someone says "403" and a permissions or authentication issue comes to mind, but the spec says that it's basically the server telling the client that it's not going to do it, don't ask it again, and here's why the client shouldn't.

As for PUT vs. POST... POST should be used to create a new instance of a resource when the user has no means to or shouldn't create an identifier for the resource. PUT is used when the resource's identity is known.

9.6 PUT

...

The fundamental difference between the POST and PUT requests is reflected in the different meaning of the Request-URI. The URI in a POST request identifies the resource that will handle the enclosed entity. That resource might be a data-accepting process, a gateway to some other protocol, or a separate entity that accepts annotations. In contrast, the URI in a PUT request identifies the entity enclosed with the request -- the user agent knows what URI is intended and the server MUST NOT attempt to apply the request to some other resource. If the server desires that the request be applied to a different URI,

it MUST send a 301 (Moved Permanently) response; the user agent MAY then make its own decision regarding whether or not to redirect the request.

For IE 7 & 8 (and other browsers without CSS3 support not including IE6) you can use the following to get the 2nd and 3rd children:

2nd Child:

td:first-child + td

3rd Child:

td:first-child + td + td

Then simply add another + td for each additional child you wish to select.

If you want to support IE6 that can be done too! You simply need to use a little javascript (jQuery in this example):

$(function() {
    $('td:first-child').addClass("firstChild");
    $(".table-class tr").each(function() {
        $(this).find('td:eq(1)').addClass("secondChild");
        $(this).find('td:eq(2)').addClass("thirdChild");
    });
});

Then in your css you simply use those class selectors to make whatever changes you like:

table td.firstChild { /*stuff here*/ }
table td.secondChild { /*stuff to apply to second td in each row*/ }

You can write a script that only return the IP like:

/sbin/ifconfig eth0 | grep 'inet addr' | cut -d: -f2 | awk '{print $1}'

For MAC:

ifconfig | grep "inet " | grep -v 127.0.0.1 | cut -d\  -f2

Or for linux system

hostname -i | awk '{print $3}' # Ubuntu 

hostname -i # Debian

here's a simple one

    private boolean isFirst = true;
private void setAdapter() {
    final ArrayList<String> spinnerArray = new ArrayList<String>();     
    spinnerArray.add("Select your option");
    spinnerArray.add("Option 1");
    spinnerArray.add("Option 2");
    spin.setOnItemSelectedListener(new AdapterView.OnItemSelectedListener() {
        @Override
        public void onItemSelected(AdapterView<?> parentView, View selectedItemView, int position, long id) {
            TextView tv = (TextView)selectedItemView;
            String res = tv.getText().toString().trim();
            if (res.equals("Option 1")) {
            //do Something
        } else if (res.equals("Option 2")) {
            //do Something else
        }
        }

        @Override
        public void onNothingSelected(AdapterView<?> parentView) { }

    });

    ArrayAdapter<String> adapter = new ArrayAdapter<String>(this, R.layout.my_spinner_style,spinnerArray) {
         public View getView(int position, View convertView, ViewGroup parent) {
             View v = super.getView(position, convertView, parent);
             int height = (int) TypedValue.applyDimension(TypedValue.COMPLEX_UNIT_DIP, 25, getResources().getDisplayMetrics());                  
             ((TextView) v).setTypeface(tf2);
             ((TextView) v).getLayoutParams().height = height;
             ((TextView) v).setGravity(Gravity.CENTER);
             ((TextView) v).setTextSize(TypedValue.COMPLEX_UNIT_SP, 19);
             ((TextView) v).setTextColor(Color.WHITE);
             return v;
         }

         public View getDropDownView(int position, View convertView,
                 ViewGroup parent) {
             if (isFirst) {
                 isFirst = false;
                 spinnerArray.remove(0);
             }
             View v = super.getDropDownView(position, convertView, parent);                  
             ((TextView) v).setTextColor(Color.argb(255, 70, 70, 70));
             ((TextView) v).setTypeface(tf2);
             ((TextView) v).setGravity(Gravity.CENTER);
             return v;
         }
     };
     spin.setAdapter(adapter);
}

In the most simple terms extends is used to inherit from a class and implements is used to apply an interface in your class

extends:

public class Bicycle {
    //properties and methods
}
public class MountainBike extends Bicycle {
    //new properties and methods
}

implements:

public interface Relatable {
    //stuff you want to put
}
public class RectanglePlus implements Relatable {
    //your class code
}

if you still have confusion read this: https://docs.oracle.com/javase/tutorial/java/IandI/subclasses.html https://docs.oracle.com/javase/tutorial/java/IandI/usinginterface.html

Specifications:

• Web Sockets API

Articles:

• HTML5 WebSocket and WebJneering

Tutorial:

• HTML5 Rocks - WebSockets

Libraries:

• Check this SO post html5 websocket need server?, it links to https://kaazing.com/download

An empty array is defined by omitting values, like so:

v=[[],[]]
a=[]
b=[1,2]
a.push(b)
b==a[0]

I don't fully understand what you really mean by initializing an array?

Here's an example:

class Environment {

    // you can declare private, public and protected variables in constructor signature 
    constructor(
        private id: string,
        private name: string
    ) { 
        alert( this.id );
    }
}


let environments = new Environment('a','b');

// creating and initializing array of Environment objects
let envArr: Array<Environment> = [ 
        new Environment('c','v'), 
        new Environment('c','v'), 
        new Environment('g','g'), 
        new Environment('3','e') 
  ];

Try it here : https://www.typescriptlang.org/play/index.html

I have been reading through most of the answers here and many of the comments, and I didn't see any reference to the one instance that I could think of where i++ is more efficient than ++i (and perhaps surprisingly --i was more efficient than i--). That is for C compilers for the DEC PDP-11!

The PDP-11 had assembly instructions for pre-decrement of a register and post-increment, but not the other way around. The instructions allowed any "general-purpose" register to be used as a stack pointer. So if you used something like *(i++) it could be compiled into a single assembly instruction, while *(++i) could not.

This is obviously a very esoteric example, but it does provide the exception where post-increment is more efficient(or I should say was, since there isn't much demand for PDP-11 C code these days).

1. Close Anaconda/Spyder
2. Open command prompt and run the below command
3. conda update --all
4. Start the app again and this time it should work.

Note - You need not have to uninstall/reinstall anything.

Based on the existing answers, here's a step-by-step guide to sending automated e-mails over SMTP, using a GMail account, from the command line, without disclosing the password.

Requirements

First, install the following software packages:

• Expect
• OpenSSL
• Core Utils (base64)

These instructions assume a Linux operating system, but should be reasonably easy to port to Windows (via Cygwin or native equivalents), or other operating system.

Authentication

Save the following shell script as authentication.sh:

#!/bin/bash

# Asks for a username and password, then spits out the encoded value for
# use with authentication against SMTP servers.

echo -n "Email (shown): "
read email
echo -n "Password (hidden): "
read -s password
echo

TEXT="\0$email\0$password"

echo -ne $TEXT | base64

Make it executable and run it as follows:

chmod +x authentication.sh
./authentication.sh

When prompted, provide your e-mail address and password. This will look something like:

Email (shown): [email protected]
Password (hidden): 
AGJvYkBnbWFpbC5jb20AYm9iaXN0aGViZXN0cGVyc29uZXZlcg==

Copy the last line (AGJ...==), as this will be used for authentication.

Notification

Save the following expect script as notify.sh (note the first line refers to the expect program):

#!/usr/bin/expect

set address "[lindex $argv 0]"
set subject "[lindex $argv 1]"
set ts_date "[lindex $argv 2]"
set ts_time "[lindex $argv 3]"

set timeout 10
spawn openssl s_client -connect smtp.gmail.com:465 -crlf -ign_eof 

expect "220" {
  send "EHLO localhost\n"

  expect "250" {
    send "AUTH PLAIN YOUR_AUTHENTICATION_CODE\n"

    expect "235" {
      send "MAIL FROM: <YOUR_EMAIL_ADDRESS>\n"

      expect "250" {
        send "RCPT TO: <$address>\n"

        expect "250" {
          send "DATA\n"

          expect "354" {
            send "Subject: $subject\n\n"
            send "Email sent on $ts_date at $ts_time.\n"
            send "\n.\n"

            expect "250" {
                send "quit\n"
            }
          }
        }
      }
    }
  }
}

Make the following changes:

1. Paste over YOUR_AUTHENTICATION_CODE with the authentication code generated by the authentication script.
2. Change YOUR_EMAIL_ADDRESS with the e-mail address used to generate the authentication code.
3. Save the file.

For example (note the angle brackets are retained for the e-mail address):

send "AUTH PLAIN AGJvYkBnbWFpbC5jb20AYm9iaXN0aGViZXN0cGVyc29uZXZlcg==\n"
send "MAIL FROM: <[email protected]>\n"

Lastly, make the notify script executable as follows:

chmod +x notify.sh

Send E-mail

Send an e-mail from the command line as follows:

./notify.sh [email protected] "Command Line" "March 14" "15:52"

This error can be seen for a number of reasons:

1. As mentioned above, starting the parenthesis on a new line.

Error:

render() {
  return  
  (
    <div>I am demo data</div>
  )
}

Correct way to implement render:

render() {
  return (
    <div>I am demo html</div>
  );
}

In the above example, the semicolon at the end of the return statement will not make any difference.

2. It can also be caused due to the wrong brackets used in the routing:

Error:

export default () => {
  <BrowserRouter>
    <Switch>
      <Route exact path='/' component={ DemoComponent } />
    </Switch>
  </BrowserRouter>
}

Correct way:

export default () => (
  <BrowserRouter>
    <Switch>
      <Route exact path='/' component={ DemoComponent } />
    </Switch>
  </BrowserRouter>
)

In the error example, we have used curly braces but we have to use round brackets instead. This also gives the same error.

try this command for name and changes number of line

git show --stat <commit-hash>

only show file names

git show --stat --name-only  <commit-hash>

for get last commit hash then try this command

git log -1

last commit with show files name and file status modify,create or delete

 git log -1 --oneline --name-status <commit-hash>

or for all

git log

for more advanced git log information read this article

https://devhints.io/git-log-format

https://devhints.io/git-log

String myText = "   Hello     World   ";
myText = myText.trim().replace(/ +(?= )/g,'');


// Output: "Hello World"

Review the pom.xml file inside of target/checkout/. Chances are, the pom.xml in your trunk or master branch does not have the distributionManagement tag.

Create a file called MoveFiles.bat with the syntax

move c:\Sourcefoldernam\*.* e:\destinationFolder

then schedule a task to run that MoveFiles.bat every 10 hours.

With C#6.0 you also have a new way of formatting date when using string interpolation e.g.

$"{DateTime.Now:yyyy-MM-dd HH:mm:ss}"

Can't say its any better, but it is slightly cleaner if including the formatted DateTime in a longer string.

More about string interpolation.

The solution is straightforward.

Make sure that the database connector can be reached by your classpath when running (not compiling) the program, e.g.:

java -classpath .;c:\path\to\mysql-connector-java-5.1.39.jar YourMainClass 

Also, if you're using an old version of Java (pre JDBC 4.0), before you do DriverManager.getConnection this line is required:

Class.forName("your.jdbc.driver.TheDriver"); // this line is not needed for modern Java

You don't need to use linq since List<T> provides the methods to do this:

int index = lst.FindLastIndex(c => c.Number == textBox6.Text);
if(index != -1)
{
    lst[index] = new Class1() { ... };
}

The correct fix is to add the property in the type definition as explained in @Nitzan Tomer's answer. If that's not an option though:

(Hacky) Workaround 1

You can assign the object to a constant of type any, then call the 'non-existing' property.

const newObj: any = oldObj;
return newObj.someProperty;

You can also cast it as any:

return (oldObj as any).someProperty;

This fails to provide any type safety though, which is the point of TypeScript.

(Hacky) Workaround 2

Another thing you may consider, if you're unable to modify the original type, is extending the type like so:

interface NewType extends OldType {
  someProperty: string;
}

Now you can cast your variable as this NewType instead of any. Still not ideal but less permissive than any, giving you more type safety.

return (oldObj as NewType).someProperty;

I want to extend MattMitchell's answer by saying you can create an extension method for this functionality:

public static IsEmptyOrWhitespace(this string value) {
    return String.IsEmptyOrWhitespace(value);
}

This makes it possible to call:

string strValue;
if (strValue.IsEmptyOrWhitespace())
     // do stuff

To me this is a lot cleaner than calling the static String function, while still being NullReference safe!

First, you need to configure your computer to get a static IP from your router. Instructions for how to do this can be found: here

For example, let's say you picked the IP address 192.168.1.102. After the above step is completed, you should be able to get to the website on your local machine by going to both http://localhost and http://192.168.1.102, since your computer will now always have that IP address on your network.

If you look up your IP address (such as http://www.ip-adress.com/), the IP you see is actually the IP of your router. When your friend accesses your website, you'll give him this IP. However, you need to tell your router that when it gets a request for a webpage, forward that request to your server. This is done through port forwarding.

Two examples of how to do this can be found here and here, although the exact screens you see will vary depending on the manufacturer of your router (Google for exact instructions, if needed).

For the Linksys router I have, I enter http://192.168.1.1/, enter my username/password, Applications & Gaming tab > Port Range Forward. Enter the application name (whatever you want to call it), start port (80), end port (80), protocol (TCP), ip address (using the above example, you would enter 192.168.1.102, which is the static IP you assigned your server), and be sure to check to enable the forwarding. Restart your router and the changes should take effect.

Having done all that, your friend should now be able to access your webpage by going to his web browser on his machine and entering http://IP.address.of.your.computer (the same one you see when you go here ).

As mentioned earlier, the IP address assigned to you by your ISP will eventually change whether you sign offline or not. I strongly recommend using DynDns, which is absolutely free. You can choose a hostname at their domain (such as cuga.kicks-ass.net) and your friend can then always access your website by simply going to http://cuga.kicks-ass.net in his browser. Here is their site again: DynDns

I hope this helps.

There are 3 ways to pass data from Parent to Children

1. Through shareable service : you should store into a service the data you would like to share with the children

2. Through Children Router Resolver if you have to receive different data

   this.data = this.route.snaphsot.data['dataFromResolver'];
   

3. Through Parent Router Resolver if your have to receive the same data from parent

   this.data = this.route.parent.snaphsot.data['dataFromResolver'];
   

Note1: You can read about resolver here. There is also an example of resolver and how to register the resolver into the module and then retrieve data from resolver into the component. The resolver registration is the same on the parent and child.

Note2: You can read about ActivatedRoute here to be able to get data from router

Windows batch log file name in 2018-02-08_14.32.06.34.log format:

setlocal
set d=%DATE:~-4%-%DATE:~4,2%-%DATE:~7,2%
set t=%time::=.% 
set t=%t: =%
set logfile="%d%_%t%.log"

ping localhost -n 11>%1/%logfile%
endlocal

You're declaring (some of) your event handlers incorrectly:

$('.menuOption').click(function( event ){ // <---- "event" parameter here

    event.preventDefault();
    var categories = $(this).attr('rel');
    $('.pages').hide();
    $(categories).fadeIn();


});

You need "event" to be a parameter to the handlers. WebKit follows IE's old behavior of using a global symbol for "event", but Firefox doesn't. When you're using jQuery, that library normalizes the behavior and ensures that your event handlers are passed the event parameter.

edit — to clarify: you have to provide some parameter name; using event makes it clear what you intend, but you can call it e or cupcake or anything else.

Note also that the reason you probably should use the parameter passed in from jQuery instead of the "native" one (in Chrome and IE and Safari) is that that one (the parameter) is a jQuery wrapper around the native event object. The wrapper is what normalizes the event behavior across browsers. If you use the global version, you don't get that.

In the beaten-up MVC pattern, the Servlet is "C" - controller.

Its main job is to do initial request evaluation and then dispatch the processing based on the initial evaluation to the specific worker. One of the worker's responsibilities may be to setup some presentation layer beans and forward the request to the JSP page to render HTML. So, for this reason alone, you need to pass the request object to the service layer.

I would not, though, start writing raw Servlet classes. The work they do is very predictable and boilerplate, something that framework does very well. Fortunately, there are many available, time-tested candidates ( in the alphabetical order ): Apache Wicket, Java Server Faces, Spring to name a few.

'''

If the python version you installed is 3.6.1, you can print strings and a variable through
a single line of code.
For example the first string is "I have", the second string is "US
Dollars" and the variable, **card.price** is equal to 300, we can write
the code this way:

'''

print("I have", card.price, "US Dollars")

#The print() function outputs strings to the screen.  
#The comma lets you concatenate and print strings and variables together in a single line of code.

JSON is simpler and faster than PHP's serialization format and should be used unless:

• You're storing deeply nested arrays: json_decode(): "This function will return false if the JSON encoded data is deeper than 127 elements."
• You're storing objects that need to be unserialized as the correct class
• You're interacting with old PHP versions that don't support json_decode

Most compact with Java 8:

map.entrySet().forEach(System.out::println);

CASE might help you out:

SELECT t.first_name,
       t.last_name,
       t.employid,
       t.status
  FROM employeetable t
 WHERE t.status = (CASE WHEN status_flag = STATUS_ACTIVE THEN 'A'
                        WHEN status_flag = STATUS_INACTIVE THEN 'T'
                        ELSE null END)
   AND t.business_unit = (CASE WHEN source_flag = SOURCE_FUNCTION THEN 'production'
                               WHEN source_flag = SOURCE_USER THEN 'users'
                               ELSE null END)
   AND t.first_name LIKE firstname
   AND t.last_name LIKE lastname
   AND t.employid LIKE employeeid;

The CASE statement evaluates multiple conditions to produce a single value. So, in the first usage, I check the value of status_flag, returning 'A', 'T' or null depending on what it's value is, and compare that to t.status. I do the same for the business_unit column with a second CASE statement.

> and < is a character entity reference for the > and < character in HTML.

It is not possible to use the less than (<) or greater than (>) signs in your file, because the browser will mix them with tags.

for these difficulties you can use entity names(>) and entity numbers(<).

You can also try the find command. If you only want files in the current directory:

find . -d 1 -prune -ls

Run a command on each of them?

find . -d 1 -prune -exec echo {} \;

Count lines, but only in files?

find . -d 1 -prune -type f -exec wc -l {} \;

It looks like you are trying to do this?

Iterate and mutate an array using Array.prototype.splice

var pre = document.getElementById('out');

function log(result) {
  pre.appendChild(document.createTextNode(result + '\n'));
}

var review = ['a', 'b', 'c', 'b', 'a'];

review.forEach(function(item, index, object) {
  if (item === 'a') {
    object.splice(index, 1);
  }
});

log(review);

<pre id="out"></pre>

Which works fine for simple case where you do not have 2 of the same values as adjacent array items, other wise you have this problem.

var pre = document.getElementById('out');

function log(result) {
  pre.appendChild(document.createTextNode(result + '\n'));
}

var review = ['a', 'a', 'b', 'c', 'b', 'a', 'a'];

review.forEach(function(item, index, object) {
  if (item === 'a') {
    object.splice(index, 1);
  }
});

log(review);

<pre id="out"></pre>

So what can we do about this problem when iterating and mutating an array? Well the usual solution is to work in reverse. Using ES3 while but you could use for sugar if preferred

var pre = document.getElementById('out');

function log(result) {
  pre.appendChild(document.createTextNode(result + '\n'));
}

var review = ['a' ,'a', 'b', 'c', 'b', 'a', 'a'],
  index = review.length - 1;

while (index >= 0) {
  if (review[index] === 'a') {
    review.splice(index, 1);
  }

  index -= 1;
}

log(review);

<pre id="out"></pre>

Ok, but you wanted to use ES5 iteration methods. Well and option would be to use Array.prototype.filter but this does not mutate the original array but creates a new one, so while you can get the correct answer it is not what you appear to have specified.

We could also use ES5 Array.prototype.reduceRight, not for its reducing property by rather its iteration property, i.e. iterate in reverse.

var pre = document.getElementById('out');

function log(result) {
  pre.appendChild(document.createTextNode(result + '\n'));
}

var review = ['a', 'a', 'b', 'c', 'b', 'a', 'a'];

review.reduceRight(function(acc, item, index, object) {
  if (item === 'a') {
    object.splice(index, 1);
  }
}, []);

log(review);

<pre id="out"></pre>

Or we could use ES5 Array.protoype.indexOf like so.

var pre = document.getElementById('out');

function log(result) {
  pre.appendChild(document.createTextNode(result + '\n'));
}

var review = ['a', 'a', 'b', 'c', 'b', 'a', 'a'],
  index = review.indexOf('a');

while (index !== -1) {
  review.splice(index, 1);
  index = review.indexOf('a');
}

log(review);

<pre id="out"></pre>

But you specifically want to use ES5 Array.prototype.forEach, so what can we do? Well we need to use Array.prototype.slice to make a shallow copy of the array and Array.prototype.reverse so we can work in reverse to mutate the original array.

var pre = document.getElementById('out');

function log(result) {
  pre.appendChild(document.createTextNode(result + '\n'));
}

var review = ['a', 'a', 'b', 'c', 'b', 'a', 'a'];

review.slice().reverse().forEach(function(item, index, object) {
  if (item === 'a') {
    review.splice(object.length - 1 - index, 1);
  }
});

log(review);

<pre id="out"></pre>

Finally ES6 offers us some further alternatives, where we do not need to make shallow copies and reverse them. Notably we can use Generators and Iterators. However support is fairly low at present.

var pre = document.getElementById('out');

function log(result) {
  pre.appendChild(document.createTextNode(result + '\n'));
}

function* reverseKeys(arr) {
  var key = arr.length - 1;

  while (key >= 0) {
    yield key;
    key -= 1;
  }
}

var review = ['a', 'a', 'b', 'c', 'b', 'a', 'a'];

for (var index of reverseKeys(review)) {
  if (review[index] === 'a') {
    review.splice(index, 1);
  }
}

log(review);

<pre id="out"></pre>

Something to note in all of the above is that, if you were stripping NaN from the array then comparing with equals is not going to work because in Javascript NaN === NaN is false. But we are going to ignore that in the solutions as it it yet another unspecified edge case.

So there we have it, a more complete answer with solutions that still have edge cases. The very first code example is still correct but as stated, it is not without issues.

The same happened for me with eslint module. EsLinter throw Parsing error: Invalid left-hand side in assignment expression for await in second if statement.

if (condition_one) {
  let result = await myFunction()
}

if (condition_two) {
  let result = await myFunction() // eslint parsing error
}

As strange as it sounds what fixed this error was to add ; semicolon at the end of line where await occurred.

if (condition_one) {
  let result = await myFunction();
}

if (condition_two) {
  let result = await myFunction();
}

Overall just add display:block; to your span. You can leave your html unchanged.

Demo

You can do it with the following css:

p {
    font-size:24px; 
    font-weight: 300; 
    -webkit-font-smoothing: subpixel-antialiased; 
    margin-top:0px;
}

p span {
    font-size:16px; 
    font-style: italic; 
    margin-top:20px; 
    padding-left:10px; 
    display:inline-block;
}

have you tried eager loading?

@attachments = Job.includes(:attachments).find(1).attachments

Include #include <boost/version.hpp>

std::cout << "Using Boost "     
          << BOOST_VERSION / 100000     << "."  // major version
          << BOOST_VERSION / 100 % 1000 << "."  // minor version
          << BOOST_VERSION % 100                // patch level
          << std::endl;

Possible output: Using Boost 1.75.0

Tested with Boost 1.51.0 to 1.63, 1.71.0 and 1.75.0:

You miss the from clause

SELECT *  from TCCAWZTXD.TCC_COIL_DEMODATA WHERE CURRENT_INSERTTIME  BETWEEN(CURRENT_TIMESTAMP)-5 minutes AND CURRENT_TIMESTAMP

You can use foreach if the object you want to iterate over implements the IEnumerable interface. You need to use for if you can access the object only by index.

Don't change the DNS on the phone. Instead, connect with wifi to the local network and you are all set.

At my office, we have internal servers with internal DNS that are not exposed to the Internet. I just connect with iPhone to the office wifi and can then access them fine.

YMMV, but instead of configuring the phone DNS, it feels to me that just setting up local internal DNS and wifi is a cleaner and easier solution.

I was able to stream line this by using the built in support in Spring with it's ResourceHttpMessageConverter. This will set the content-length and content-type if it can determine the mime-type

@RequestMapping(value = "/files/{file_name}", method = RequestMethod.GET)
@ResponseBody
public FileSystemResource getFile(@PathVariable("file_name") String fileName) {
    return new FileSystemResource(myService.getFileFor(fileName)); 
}

You should exec:

dnf install gcc-c++

Of Course, abstract class can have a constructor.Generally class constructor is used to initialise fields.So, an abstract class constructor is used to initialise fields of the abstract class. You would provide a constructor for an abstract class if you want to initialise certain fields of the abstract class before the instantiation of a child-class takes place. An abstract class constructor can also be used to execute code that is relevant for every child class. This prevents code duplication.

We cannot create an instance of an abstract class,But we can create instances of classes those are derived from the abstract class. So, when an instance of derived class is created, the parent abstract class constructor is automatically called.

Reference :This Article

Flask-Restful 0.3.6 the Request Parsing recommend marshmallow

marshmallow is an ORM/ODM/framework-agnostic library for converting complex datatypes, such as objects, to and from native Python datatypes.

A simple marshmallow example is showing below.

from marshmallow import Schema, fields

class UserSchema(Schema):
    name = fields.Str()
    email = fields.Email()
    created_at = fields.DateTime()

from marshmallow import pprint

user = User(name="Monty", email="[email protected]")
schema = UserSchema()
result = schema.dump(user)
pprint(result)
# {"name": "Monty",
#  "email": "[email protected]",
#  "created_at": "2014-08-17T14:54:16.049594+00:00"}

The core features contain

Declaring Schemas
Serializing Objects (“Dumping”)
Deserializing Objects (“Loading”)
Handling Collections of Objects
Validation
Specifying Attribute Names
Specifying Serialization/Deserialization Keys
Refactoring: Implicit Field Creation
Ordering Output
“Read-only” and “Write-only” Fields
Specify Default Serialization/Deserialization Values
Nesting Schemas
Custom Fields

If you are looking for a quick and manual process with UI. I always use Mozilla Firefox to convert from PFX to P12. First import the certificate into the Firefox browser (Options > Privacy & Security > View Certificates... > Import...). Once installed, perform the export to create the P12 file by choosing the certificate name from the Certificate Manager and then click Backup... and enter the file name and then enter the password.

@Paul Cavacas, I had the same issue and I solved by setting the Input() decorator above the getter.

  @Input('allowDays')
  get in(): any {
    return this._allowDays;
  }

  //@Input('allowDays')
  // not working
  set in(val) {
    console.log('allowDays = '+val);
    this._allowDays = val;
  }

See this plunker: https://plnkr.co/edit/6miSutgTe9sfEMCb8N4p?p=preview

Inheritance is pretty enticing especially coming from procedural-land and it often looks deceptively elegant. I mean all I need to do is add this one bit of functionality to some other class, right? Well, one of the problems is that

inheritance is probably the worst form of coupling you can have

Your base class breaks encapsulation by exposing implementation details to subclasses in the form of protected members. This makes your system rigid and fragile. The more tragic flaw however is the new subclass brings with it all the baggage and opinion of the inheritance chain.

The article, Inheritance is Evil: The Epic Fail of the DataAnnotationsModelBinder, walks through an example of this in C#. It shows the use of inheritance when composition should have been used and how it could be refactored.

Easiest Solution... Drumm Roll... git version 2.10.1 (Apple Git-78)

1) git checkout -b localBranchNameThatDoesNotExistInRemote

2) Do your changes, and do a git commit 

3) git push origin localBranchNameThatDoesNotExistInRemote --force

N.B. - The branch you just created in your local environment, and the remote non-existing branch where you are trying to push, must have the same name.

The issue pointed in the comment is valid, so here is a different revision that's immune to that:

function show_alert() {
  if(!confirm("Do you really want to do this?")) {
    return false;
  }
  this.form.submit();
}

Have you tried Tools > Formula Auditing?

This happened to me when I installed Intellij IDEA 2017, go to menu Preferences -> Build, Execution, Deployment -> Debugger and disable the option: "Force Classic VM for JDK 1.3.x and earlier". This works to me.

css:

.navbar-header {
    float: left;
    padding: 15px;
    text-align: center;
    width: 100%;
}
.navbar-brand {float:none;}

html:

<nav class="navbar navbar-default" role="navigation">
  <div class="navbar-header">
    <a class="navbar-brand" href="#">Brand</a>
  </div>
</nav>

Try .replace(/ /g,"_");

Edit: or .split(' ').join('_') if you have an aversion to REs

Edit: John Resig said:

If you're searching and replacing through a string with a static search and a static replace it's faster to perform the action with .split("match").join("replace") - which seems counter-intuitive but it manages to work that way in most modern browsers. (There are changes going in place to grossly improve the performance of .replace(/match/g, "replace") in the next version of Firefox - so the previous statement won't be the case for long.)

you have defined the public dir in app root/public

app.use(express.static(__dirname + '/public')); 

so you have to use:

./css/main.css

You can simply use raw html tags like

foo <font color='red'>bar</font> foo

Be aware that this will not survive a conversion of the notebook to latex.

As there are some complaints about the deprecation of the proposed solution. They are totally valid and Scott has already answered the question with a more recent, i.e. CSS based approach. Nevertheless, this answer shows some general approach to use html tags within IPython to style markdown cell content beyond the available pure markdown capabilities.

If you are using Google App Engine or MongoDB as your backend, and you are using the djangoappengine library, there is a built in ListField that does exactly what you want. Further, it's easy to query the Listfield to find all objects that contain an element in the list.

You can do it without any interruption, with the new (Git 2.0 Q2 2014) setting gc.autodetach.

See commit 4c4ac4d and commit 9f673f9 (Nguy?n Thái Ng?c Duy, aka pclouds):

gc --auto takes time and can block the user temporarily (but not any less annoyingly).
Make it run in background on systems that support it.
The only thing lost with running in background is printouts. But gc output is not really interesting.
You can keep it in foreground by changing gc.autodetach.

Since that 2.0 release, there was a bug though: git 2.7 (Q4 2015) will make sure to not lose the error message.
See commit 329e6e8 (19 Sep 2015) by Nguy?n Thái Ng?c Duy (pclouds).
^{(Merged by Junio C Hamano -- gitster -- in commit 076c827, 15 Oct 2015)}

gc: save log from daemonized gc --auto and print it next time

While commit 9f673f9 (gc: config option for running --auto in background - 2014-02-08) helps reduce some complaints about 'gc --auto' hogging the terminal, it creates another set of problems.

The latest in this set is, as the result of daemonizing, stderr is closed and all warnings are lost. This warning at the end of cmd_gc() is particularly important because it tells the user how to avoid "gc --auto" running repeatedly.
Because stderr is closed, the user does not know, naturally they complain about 'gc --auto' wasting CPU.

Daemonized gc now saves stderr to $GIT_DIR/gc.log.
Following gc --auto will not run and gc.log printed out until the user removes gc.log.

You can use HttpPost, there are methods to add Header to the Request.

DefaultHttpClient httpclient = new DefaultHttpClient();
String url = "http://localhost";
HttpPost httpPost = new HttpPost(url);

httpPost.addHeader("header-name" , "header-value");

HttpResponse response = httpclient.execute(httpPost);

This is correct query for join 3 table with same id**

select a.empname,a.empsalary,b.workstatus,b.bonus,c.dateofbirth from employee a, Report b,birth c where a.empid=b.empid and a.empid=c.empid and b.empid='103';

employee first table. report second table. birth third table

Hi I think the SimpleXml is very useful . And with it I am using xpath;

$xml = simplexml_load_file("som_xml.xml");

$blocks  = $xml->xpath('//block'); //gets all <block/> tags
$blocks2 = $xml->xpath('//layout/block'); //gets all <block/> which parent are   <layout/>  tags

I use many xml configs and this helps me to parse them really fast. SimpleXml is written on C so it's very fast.

raw_input() was renamed to input() in Python 3.

From http://docs.python.org/dev/py3k/whatsnew/3.0.html

For those of you who are interested in getting the value adding a custom column name, this worked for me:

CAST(
    CASE WHEN EXISTS ( 
           SELECT * 
           FROM mytable 
           WHERE mytable.id = 1
    ) 
    THEN TRUE 
    ELSE FALSE 
    END AS bool) 
AS "nameOfMyColumn"

You can skip the double quotes from the column name in case you're not interested in keeping the case sensitivity of the name (in some clients).

I slightly tweaked @Chad's answer for this.

You could always write out the list of keys in addition to dumping the dict, and then reconstruct the OrderedDict by iterating through the list?

This is possible with simple JavaScript.

• In iFrame1, make a JavaScript function that is called in the body tag onload. I have it check a server side variable that I set, so it does not try to run the JavaScript function in iframe2 unless I have taken a specific action in iframe1. You could set this up as a function fired by a button press or however you want to in iframe1.
• Then in iframe2, you have the second function I list below. The function in iframe1 basically goes to the parent page and then uses the window.frames syntax to fire a JavaScript function in iframe2. Just make sure to use the id/name of iframe2 and not the src.

//function in iframe1
function refreshIframe2()
{
    if (<cfoutput>#didValidation#</cfoutput> == 1)
    {   
         parent.window.frames.iframe2.refreshPage();
    }
}

//function in iframe2
function refreshPage()
{   
    document.location.reload();
}

if (strpos($string, $word) === FALSE) {
   ... not found ...
}

Note that strpos() is case sensitive, if you want a case-insensitive search, use stripos() instead.

Also note the ===, forcing a strict equality test. strpos CAN return a valid 0 if the 'needle' string is at the start of the 'haystack'. By forcing a check for an actual boolean false (aka 0), you eliminate that false positive.

Of course, there is nothing that says the extension of a header file must be .h and the extension of a C source file must be .c. These are useful conventions.

E:\Temp> type my.interface
#ifndef MY_INTERFACE_INCLUDED
#define MYBUFFERSIZE 8
#define MY_INTERFACE_INCLUDED
#endif

E:\Temp> type my.source
#include <stdio.h>

#include "my.interface"

int main(void) {
    char x[MYBUFFERSIZE] = {0};
    x[0] = 'a';
    puts(x);
    return 0;
}

E:\Temp> gcc -x c my.source -o my.exe

E:\Temp> my
a

One example is when you write a parser function and pass it a source pointer to read from, if the function is supposed to push that pointer forward behind the last character which has been correctly recognized by the parser. Using a reference to a pointer makes it clear then that the function will move the original pointer to update its position.

In general, you use references to pointers if you want to pass a pointer to a function and let it move that original pointer to some other position instead of just moving a copy of it without affecting the original.

There are a number of ways you can do this:

1. Use Thread.join() in your main thread to wait in a blocking fashion for each Thread to complete, or
2. Check Thread.isAlive() in a polling fashion -- generally discouraged -- to wait until each Thread has completed, or
3. Unorthodox, for each Thread in question, call setUncaughtExceptionHandler to call a method in your object, and program each Thread to throw an uncaught Exception when it completes, or
4. Use locks or synchronizers or mechanisms from java.util.concurrent, or
5. More orthodox, create a listener in your main Thread, and then program each of your Threads to tell the listener that they have completed.

How to implement Idea #5? Well, one way is to first create an interface:

public interface ThreadCompleteListener {
    void notifyOfThreadComplete(final Thread thread);
}

then create the following class:

public abstract class NotifyingThread extends Thread {
  private final Set<ThreadCompleteListener> listeners
                   = new CopyOnWriteArraySet<ThreadCompleteListener>();
  public final void addListener(final ThreadCompleteListener listener) {
    listeners.add(listener);
  }
  public final void removeListener(final ThreadCompleteListener listener) {
    listeners.remove(listener);
  }
  private final void notifyListeners() {
    for (ThreadCompleteListener listener : listeners) {
      listener.notifyOfThreadComplete(this);
    }
  }
  @Override
  public final void run() {
    try {
      doRun();
    } finally {
      notifyListeners();
    }
  }
  public abstract void doRun();
}

and then each of your Threads will extend NotifyingThread and instead of implementing run() it will implement doRun(). Thus when they complete, they will automatically notify anyone waiting for notification.

Finally, in your main class -- the one that starts all the Threads (or at least the object waiting for notification) -- modify that class to implement ThreadCompleteListener and immediately after creating each Thread add itself to the list of listeners:

NotifyingThread thread1 = new OneOfYourThreads();
thread1.addListener(this); // add ourselves as a listener
thread1.start();           // Start the Thread

then, as each Thread exits, your notifyOfThreadComplete method will be invoked with the Thread instance that just completed (or crashed).

Note that better would be to implements Runnable rather than extends Thread for NotifyingThread as extending Thread is usually discouraged in new code. But I'm coding to your question. If you change the NotifyingThread class to implement Runnable then you have to change some of your code that manages Threads, which is pretty straightforward to do.

If options under Server Locations are grayed out, note the message in the section title: "Server must be published with no modules present". To publish the server, right click the name of the server in the Server window and select "Publish".

An alternative solution would be to use the Url helper object to set the href attribute of an <a> tag like:

<a href="@Url.Action("Details", "Product",new { id=item.ID }) )">Details</a>

Does not work fully (the hr line part) on all browsers, but here is the solution:

<select name="selector">_x000D_
  <option value="1">Option 1</option>_x000D_
  <option value="2">Option 2</option>_x000D_
  <option value="3">Option 3</option>_x000D_
  <option disabled><hr></option>_x000D_
  <option value="4">Option 4</option>_x000D_
  <option value="5">Option 5</option>_x000D_
  <option value="6">Option 6</option>_x000D_
</select>

Note: This was written and accepted back in the Rails 2 days; nowadays grosser's answer is the way to go.

Option 1: Probably the simplest way is to include your helper module in your controller:

class MyController < ApplicationController
  include MyHelper

  def xxxx
    @comments = []
    Comment.find_each do |comment|
      @comments << {:id => comment.id, :html => html_format(comment.content)}
    end
  end
end

Option 2: Or you can declare the helper method as a class function, and use it like so:

MyHelper.html_format(comment.content)

If you want to be able to use it as both an instance function and a class function, you can declare both versions in your helper:

module MyHelper
  def self.html_format(str)
    process(str)
  end

  def html_format(str)
    MyHelper.html_format(str)
  end
end

Hope this helps!

For me it was a ternary statement:

It was complaining about this line in particular, about the semicolon:

let num_coin = val.num_coin ? val.num_coin || 2;

I changed it to:

let num_coin = val.num_coin || 2;

If you want to further automate this, because you are checking your module into version control, and don't want to rely upon devs remembering to npm link, you can add this to your package.json "scripts" section:

"scripts": {
    "postinstall": "npm link ../somelocallib",
    "postupdate": "npm link ../somelocallib"
  }

This feels beyond hacky, but it seems to "work". Got the tip from this npm issue: https://github.com/npm/npm/issues/1558#issuecomment-12444454

I would do it this way, so you won't end up with duplicate entries if the script is run multiple times.

@echo off

SET NEWLINE=^& echo.

FIND /C /I "ns1.intranet.de" %WINDIR%\system32\drivers\etc\hosts
IF %ERRORLEVEL% NEQ 0 ECHO %NEWLINE%^62.116.159.4 ns1.intranet.de>>%WINDIR%\System32\drivers\etc\hosts

FIND /C /I "ns2.intranet.de" %WINDIR%\system32\drivers\etc\hosts
IF %ERRORLEVEL% NEQ 0 ECHO %NEWLINE%^217.160.113.37 ns2.intranet.de>>%WINDIR%\System32\drivers\etc\hosts

FIND /C /I "ns3.intranet.de" %WINDIR%\system32\drivers\etc\hosts
IF %ERRORLEVEL% NEQ 0 ECHO %NEWLINE%^89.146.248.4 ns3.intranet.de>>%WINDIR%\System32\drivers\etc\hosts

FIND /C /I "ns4.intranet.de" %WINDIR%\system32\drivers\etc\hosts
IF %ERRORLEVEL% NEQ 0 ECHO %NEWLINE%^74.208.254.4 ns4.intranet.de>>%WINDIR%\System32\drivers\etc\hosts

For Swift4 to get weekday from string

   func getDayOfWeek(today:String)->Int {
        let formatter  = DateFormatter()
        formatter.dateFormat = "yyyy-MM-dd"
        let todayDate = formatter.date(from: today)!
        let myCalendar = NSCalendar(calendarIdentifier: NSCalendar.Identifier.gregorian)!
        let myComponents = myCalendar.components(NSCalendar.Unit.weekday, from: todayDate)
        let weekDay = myComponents.weekday
        return weekDay!
    }

let weekday = getDayOfWeek(today: "2018-10-10")
print(weekday) // 4

This is a 3 years old question but I had the same problem today. I looked your edited solution but I think that it can sacrifice the performance because it has to make a double request. So if anyone needs another solution that doesn't imply to call the service twice then this is the way I did it:

<form id="export-csv-form" method="POST" action="/the/path/to/file">
    <input type="hidden" name="anyValueToPassTheServer" value="">
</form>

This form is just used to call the service and avoid to use a window.location(). After that you just simply have to make a form submit from jquery in order to call the service and get the file. It's pretty simple but this way you can make a download using a POST. I now that this could be easier if the service you're calling is a GET, but that's not my case.

I have try this my new code and it might be helpful to you, it works perfectly in google chromr

hr {
     color: #f00;
     background: #f00; 
     width: 75%; 
     height: 5px;
}

Update Swift 4.1

Here we create a struct to implement the Tuple usage and validate the OTP text length. That needs to be of 2 fields for this example.

struct ValidateOTP {
var code: String
var isValid: Bool }

func validateTheOTP() -> ValidateOTP {
    let otpCode = String(format: "%@%@", txtOtpField1.text!, txtOtpField2.text!)
    if otpCode.length < 2 {
        return ValidateOTP(code: otpCode, isValid: false)
    } else {
        return ValidateOTP(code: otpCode, isValid: true)
    }
}

Usage:

let isValidOTP = validateTheOTP()
    if isValidOTP.isValid { print(" valid OTP") } else {   self.alert(msg: "Please fill the valid OTP", buttons: ["Ok"], handler: nil)
    }

Hope it helps!

Thanks

mvn install "-Dsomeproperty=propety value"

In pom.xml:

<properties>
    <someproperty> ${someproperty} </someproperty>
</properties>

Referred from this question

Origanally answered here

On Android, there is Uri class in package android.net . Note that Uri is part of android.net, while URI is part of java.net .

Uri class has many functions to extract query key-value pairs.

Following function returns key-value pairs in the form of HashMap.

In Java:

Map<String, String> getQueryKeyValueMap(Uri uri){
    HashMap<String, String> keyValueMap = new HashMap();
    String key;
    String value;

    Set<String> keyNamesList = uri.getQueryParameterNames();
    Iterator iterator = keyNamesList.iterator();

    while (iterator.hasNext()){
        key = (String) iterator.next();
        value = uri.getQueryParameter(key);
        keyValueMap.put(key, value);
    }
    return keyValueMap;
}

In Kotlin:

fun getQueryKeyValueMap(uri: Uri): HashMap<String, String> {
        val keyValueMap = HashMap<String, String>()
        var key: String
        var value: String

        val keyNamesList = uri.queryParameterNames
        val iterator = keyNamesList.iterator()

        while (iterator.hasNext()) {
            key = iterator.next() as String
            value = uri.getQueryParameter(key) as String
            keyValueMap.put(key, value)
        }
        return keyValueMap
    }

Update:
As of Sep 2017 this method no longer works: --no-install was removed in pip 7

Use pip install -v, you can see all versions that available

root@node7:~# pip install web.py -v
Downloading/unpacking web.py
  Using version 0.37 (newest of versions: 0.37, 0.36, 0.35, 0.34, 0.33, 0.33, 0.32, 0.31, 0.22, 0.2)
  Downloading web.py-0.37.tar.gz (90Kb): 90Kb downloaded
  Running setup.py egg_info for package web.py
    running egg_info
    creating pip-egg-info/web.py.egg-info

To not install any package, use one of following solution:

root@node7:~# pip install --no-deps --no-install flask -v                                                                                                      
Downloading/unpacking flask
  Using version 0.10.1 (newest of versions: 0.10.1, 0.10, 0.9, 0.8.1, 0.8, 0.7.2, 0.7.1, 0.7, 0.6.1, 0.6, 0.5.2, 0.5.1, 0.5, 0.4, 0.3.1, 0.3, 0.2, 0.1)
  Downloading Flask-0.10.1.tar.gz (544Kb): 544Kb downloaded

or

root@node7:~# cd $(mktemp -d)
root@node7:/tmp/tmp.c6H99cWD0g# pip install flask -d . -v
Downloading/unpacking flask
  Using version 0.10.1 (newest of versions: 0.10.1, 0.10, 0.9, 0.8.1, 0.8, 0.7.2, 0.7.1, 0.7, 0.6.1, 0.6, 0.5.2, 0.5.1, 0.5, 0.4, 0.3.1, 0.3, 0.2, 0.1)
  Downloading Flask-0.10.1.tar.gz (544Kb): 4.1Kb downloaded

Tested with pip 1.0

root@node7:~# pip --version
pip 1.0 from /usr/lib/python2.7/dist-packages (python 2.7)

Fixed it...

Get-ChildItem C:\Windows\ -recurse -include @("*.txt*","*.pdf") |
Where-Object {$_.CreationTime -gt "01/01/2013" -and $_.CreationTime -lt "12/02/2014"} | 
Select-Object FullName, CreationTime, @{Name="Mbytes";Expression={$_.Length/1Kb}}, @{Name="Age";Expression={(((Get-Date) - $_.CreationTime).Days)}} | 
Export-Csv C:\search_TXT-and-PDF_files_01012013-to-12022014_sort.txt

I would check the DDL for the sequence in the schema. JPA Implementation is responsible only creation of the sequence with the correct allocation size. Therefore, if the allocation size is 50 then your sequence must have the increment of 50 in its DDL.

This case may typically occur with the creation of a sequence with allocation size 1 then later configured to allocation size 50 (or default) but the sequence DDL is not updated.

First off, RangeToHTML. The script calls it like a method, but it isn't. It's a popular function by MVP Ron de Bruin. Coincidentally, that links points to the exact source of the script you posted, before those few lines got b?u?t?c?h?e?r?e?d? modified.

On with Range.SpecialCells. This method operates on a range and returns only those cells that match the given criteria. In your case, you seem to be only interested in the visible text cells. Importantly, it operates on a Range, not on HTML text.

For completeness sake, I'll post a working version of the script below. I'd certainly advise to disregard it and revisit the excellent original by Ron the Bruin.

Sub Mail_Selection_Range_Outlook_Body()

Dim rng As Range
Dim OutApp As Object
Dim OutMail As Object

Set rng = Nothing
' Only send the visible cells in the selection.

Set rng = Sheets("Sheet1").Range("D4:D12").SpecialCells(xlCellTypeVisible)

If rng Is Nothing Then
    MsgBox "The selection is not a range or the sheet is protected. " & _
           vbNewLine & "Please correct and try again.", vbOKOnly
    Exit Sub
End If

With Application
    .EnableEvents = False
    .ScreenUpdating = False
End With

Set OutApp = CreateObject("Outlook.Application")
Set OutMail = OutApp.CreateItem(0)


With OutMail
    .To = ThisWorkbook.Sheets("Sheet2").Range("C1").Value
    .CC = ""
    .BCC = ""
    .Subject = "This is the Subject line"
    .HTMLBody = RangetoHTML(rng)
    ' In place of the following statement, you can use ".Display" to
    ' display the e-mail message.
    .Display
End With
On Error GoTo 0

With Application
    .EnableEvents = True
    .ScreenUpdating = True
End With

Set OutMail = Nothing
Set OutApp = Nothing
End Sub


Function RangetoHTML(rng As Range)
' By Ron de Bruin.
    Dim fso As Object
    Dim ts As Object
    Dim TempFile As String
    Dim TempWB As Workbook

    TempFile = Environ$("temp") & "/" & Format(Now, "dd-mm-yy h-mm-ss") & ".htm"

    'Copy the range and create a new workbook to past the data in
    rng.Copy
    Set TempWB = Workbooks.Add(1)
    With TempWB.Sheets(1)
        .Cells(1).PasteSpecial Paste:=8
        .Cells(1).PasteSpecial xlPasteValues, , False, False
        .Cells(1).PasteSpecial xlPasteFormats, , False, False
        .Cells(1).Select
        Application.CutCopyMode = False
        On Error Resume Next
        .DrawingObjects.Visible = True
        .DrawingObjects.Delete
        On Error GoTo 0
    End With

    'Publish the sheet to a htm file
    With TempWB.PublishObjects.Add( _
         SourceType:=xlSourceRange, _
         Filename:=TempFile, _
         Sheet:=TempWB.Sheets(1).Name, _
         Source:=TempWB.Sheets(1).UsedRange.Address, _
         HtmlType:=xlHtmlStatic)
        .Publish (True)
    End With

    'Read all data from the htm file into RangetoHTML
    Set fso = CreateObject("Scripting.FileSystemObject")
    Set ts = fso.GetFile(TempFile).OpenAsTextStream(1, -2)
    RangetoHTML = ts.ReadAll
    ts.Close
    RangetoHTML = Replace(RangetoHTML, "align=center x:publishsource=", _
                          "align=left x:publishsource=")

    'Close TempWB
    TempWB.Close savechanges:=False

    'Delete the htm file we used in this function
    Kill TempFile

    Set ts = Nothing
    Set fso = Nothing
    Set TempWB = Nothing
End Function

In addition to Amra's answer, you can find other snippets by typing

Ctrl + K, Ctrl + X

Which is mapped to Edit.InsertSnippet in my Visual Studio and shows you the full list of snippets available.

Also remember that you can configure your own snippets by using the Snippets Manager, which is available in the Tools menu, Code Snippets Manager.... Basically you create a file *.snippet and use the Import button in the Code Snippets Manager to add it to Visual Studio. For a full tutorial you can go to the docs; Walkthrough: Create a code snippet.

In Visual Studio Code snippets are handled slightly different than in Visual Studio. You can access all snippets by typing Ctrl + Shift + P and type in snippet. Two options should be available, Insert Snippet and Preferences: Configure User Snippets.

The former inserts a snippet from your list of snippets (using the Language Mode which you can see in the status bar), and with the latter you can create your own snippets for any Language Mode.

If you know the shortname you can just type that and use Tab to expand the snippet. For inserting a C# property you have three snippets available, prop, propfull, and propg, for different purposes.

import UIKit

class ViewController: UIViewController {

    override func viewDidLoad() {
        super.viewDidLoad()
        // Do any additional setup after loading the view.

        let storyboard = UIStoryboard(name: "Main", bundle: nil)
        let controller = storyboard.instantiateViewController(withIdentifier: "AnotherViewController")
        self.navigationController?.pushViewController(controller, animated: true)

    }

}



import UIKit
class AnotherViewController: UIViewController {

    var name : String!

    deinit {
        print("Deint AnotherViewController")
    }

    override func viewDidLoad() {
        super.viewDidLoad()

        print(CFGetRetainCount(self))

        /*
            When you test please comment out or vice versa

         */

//        // Should not use unowned here. Because unowned is used where not deallocated. or gurranted object alive. If you immediate click back button app will crash here. Though there will no retain cycles
//        clouser(string: "") { [unowned self] (boolValue)  in
//            self.name = "some"
//        }
//


//
//        // There will be a retain cycle. because viewcontroller has a strong refference to this clouser and as well as clouser (self.name) has a strong refferennce to the viewcontroller. Deint AnotherViewController will not print
//        clouser(string: "") { (boolValue)  in
//            self.name = "some"
//        }
//
//


//        // no retain cycle here. because viewcontroller has a strong refference to this clouser. But clouser (self.name) has a weak refferennce to the viewcontroller. Deint AnotherViewController will  print. As we forcefully made viewcontroller weak so its now optional type. migh be nil. and we added a ? (self?)
//
//        clouser(string: "") { [weak self] (boolValue)  in
//            self?.name = "some"
//        }


        // no retain cycle here. because viewcontroller has a strong refference to this clouser. But clouser nos refference to the viewcontroller. Deint AnotherViewController will  print. As we forcefully made viewcontroller weak so its now optional type. migh be nil. and we added a ? (self?)

        clouser(string: "") {  (boolValue)  in
            print("some")
            print(CFGetRetainCount(self))

        }

    }


    func clouser(string: String, completion: @escaping (Bool) -> ()) {
        // some heavy task
        DispatchQueue.main.asyncAfter(deadline: .now() + 5.0) {
            completion(true)
        }

    }

}

If you do not sure about [unowned self] then use [weak self]

Yes, that is fully possible (i.e. I do exactly this); you just need to reference the right dll (System.ServiceProcess.dll) and add an installer class...

Here's an example:

[RunInstaller(true)]
public sealed class MyServiceInstallerProcess : ServiceProcessInstaller
{
    public MyServiceInstallerProcess()
    {
        this.Account = ServiceAccount.NetworkService;
    }
}

[RunInstaller(true)]
public sealed class MyServiceInstaller : ServiceInstaller
{
    public MyServiceInstaller()
    {
        this.Description = "Service Description";
        this.DisplayName = "Service Name";
        this.ServiceName = "ServiceName";
        this.StartType = System.ServiceProcess.ServiceStartMode.Automatic;
    }
}

static void Install(bool undo, string[] args)
{
    try
    {
        Console.WriteLine(undo ? "uninstalling" : "installing");
        using (AssemblyInstaller inst = new AssemblyInstaller(typeof(Program).Assembly, args))
        {
            IDictionary state = new Hashtable();
            inst.UseNewContext = true;
            try
            {
                if (undo)
                {
                    inst.Uninstall(state);
                }
                else
                {
                    inst.Install(state);
                    inst.Commit(state);
                }
            }
            catch
            {
                try
                {
                    inst.Rollback(state);
                }
                catch { }
                throw;
            }
        }
    }
    catch (Exception ex)
    {
        Console.Error.WriteLine(ex.Message);
    }
}

The best way to implement it using matplotlib.pyplot.bar(range, height, tick_label) where the range provides scalar values for the positioning of the corresponding bar in the graph. tick_label does the same work as xticks(). One can replace it with an integer also and use multiple plt.bar(integer, height, tick_label). For detailed information please refer the documentation.

import matplotlib.pyplot as plt

data = {'apple': 67, 'mango': 60, 'lichi': 58}
names = list(data.keys())
values = list(data.values())

#tick_label does the some work as plt.xticks()
plt.bar(range(len(data)),values,tick_label=names)
plt.savefig('bar.png')
plt.show()

Additionally the same plot can be generated without using range(). But the problem encountered was that tick_label just worked for the last plt.bar() call. Hence xticks() was used for labelling:

data = {'apple': 67, 'mango': 60, 'lichi': 58}
names = list(data.keys())
values = list(data.values())
plt.bar(0,values[0],tick_label=names[0])
plt.bar(1,values[1],tick_label=names[1])
plt.bar(2,values[2],tick_label=names[2])
plt.xticks(range(0,3),names)
plt.savefig('fruit.png')
plt.show()

In-place:

    public static void DistinctValues<T>(List<T> list)
    {
        list.Sort();

        int src = 0;
        int dst = 0;
        while (src < list.Count)
        {
            var val = list[src];
            list[dst] = val;

            ++dst;
            while (++src < list.Count && list[src].Equals(val)) ;
        }
        if (dst < list.Count)
        {
            list.RemoveRange(dst, list.Count - dst);
        }
    }

#include <cstdio>
#include <windows.h>
#include <tlhelp32.h>

/*!
\brief Check if a process is running
\param [in] processName Name of process to check if is running
\returns \c True if the process is running, or \c False if the process is not running
*/
bool IsProcessRunning(const wchar_t *processName)
{
    bool exists = false;
    PROCESSENTRY32 entry;
    entry.dwSize = sizeof(PROCESSENTRY32);

    HANDLE snapshot = CreateToolhelp32Snapshot(TH32CS_SNAPPROCESS, NULL);

    if (Process32First(snapshot, &entry))
        while (Process32Next(snapshot, &entry))
            if (!wcsicmp(entry.szExeFile, processName))
                exists = true;

    CloseHandle(snapshot);
    return exists;
}

The answer really depends on how you are doing the INSERT.

If you are specifying a SQL literal then you need to use the double-tick approach:

-- Direct insert
INSERT INTO Table1 (Column1) VALUES ('John''s')

-- Using a parameter, with a direct insert
DECLARE @Value varchar(50)
SET @Value = 'John''s'
INSERT INTO Table1 (Column1) VALUES (@Value)

-- Using a parameter, with dynamic SQL
DECLARE @Value varchar(50)
SET @Value = 'John''s'
EXEC sp_executesql 'INSERT INTO Table1 (Column1) VALUES (@p1)', '@p1 varchar(50)', @Value

If you are doing the INSERT from code, use parameters:

// Sample ADO.NET
using (SqlConnection conn = new SqlConnection(connectionString)) {
    conn.Open();
    using (SqlCommand command = conn.CreateCommand()) {
        command.CommandText = "INSERT INTO Table1 (Column1) VALUES (@Value)";

        command.Parameters.AddWithValue("@Value", "John's");

        command.ExecuteNonQuery();
    }
}

If your data contains user-input, direct or indirect, USE PARAMETERS. Parameters protect against SQL Injection attacks. Never ever build up dynamic SQL with user-input.

If "budget" has any NaN values but you don't want it to sum to NaN then try:

def fun (b, a):
    if math.isnan(b):
        return a
    else:
        return b + a

f = np.vectorize(fun, otypes=[float])

df['variance'] = f(df['budget'], df_Lp['actual'])

Run

git remote -v

and check whether your origin's URL has your co-worker's username hardcoded in there. If so, substitute it with your own:

git remote set-url origin <url-with-your-username>

Two lazy solutions

There are already excellent answers here and I'm no expert on this, but I am an expert in being lazy and to my expert eye these answers don't seem lazy enough.

First: return object from anonymous function

A very slight variation from T.J. Crowder, Henry Wrightson and Rafael Rocha answers:

var foo = (() => {

  // Paste in your original object
  const foo = {
    a: 5,
    b: 6,
  };
  
  // Use their properties
  foo.c = foo.a + foo.b;

  // Do whatever else you want

  // Finally, return object
  return foo;
})();

console.log(foo);

The slight advantage here is just pasting your original object as it was, without worrying about arguments etc. (IMHO the wrapper function becomes quite transparent this way).

Second: using setTimeout

This here may work, if you don't need foo.c right away:

var foo = {
  a: 5,
  b: 6,
  c: setTimeout(() => foo.c = foo.a + foo.b, 0)
};

// Though, at first, foo.c will be the integer returned by setTimeout
console.log(foo);
// But if this isn't an issue, the value will be updated when time comes in the event loop
setTimeout( () => console.log(foo), 0);

This is the demo how to trigger event

<!DOCTYPE html>
    <html>
    <head>
    <script src="https://ajax.googleapis.com/ajax/libs/jquery/1.12.4/jquery.min.js"></script>
    <script>
    $(document).ready(function(){
        $("input").select(function(){
            $("input").after(" Text marked!");
        });
        $("button").click(function(){
            $("input").trigger("select");
        });
    });
    </script>
    </head>
    <body>

    <input type="text" value="Hello World"><br><br>

    <button>Trigger the select event for the input field</button>

    </body>
    </html>

Let's say that you have:

#include <iostream>

double foo(double x)
{
  asm("# MyTag BEGIN"); // <- asm comment,
                        //    used later to locate piece of code
  double y = 2 * x + 1;

  asm("# MyTag END");

  return y;
}

int main()
{
  std::cout << foo(2);
}

To get assembly code using gcc you can do:

 g++ prog.cpp -c -S -o - -masm=intel | c++filt | grep -vE '\s+\.'

c++filt demangles symbols

grep -vE '\s+\.' removes some useless information

Now if you want to visualize the tagged part, simply use:

g++ prog.cpp -c -S -o - -masm=intel | c++filt | grep -vE '\s+\.' | grep "MyTag BEGIN" -A 20

With my computer I get:

    # MyTag BEGIN
# 0 "" 2
#NO_APP
    movsd   xmm0, QWORD PTR -24[rbp]
    movapd  xmm1, xmm0
    addsd   xmm1, xmm0
    addsd   xmm0, xmm1
    movsd   QWORD PTR -8[rbp], xmm0
#APP
# 9 "poub.cpp" 1
    # MyTag END
# 0 "" 2
#NO_APP
    movsd   xmm0, QWORD PTR -8[rbp]
    pop rbp
    ret
.LFE1814:
main:
.LFB1815:
    push    rbp
    mov rbp, rsp

A more friendly approach is to use: Compiler Explorer

All you have to do is to edit the httpd-xampp.conf

from Require local to Require all granted in the LocationMatch tag.

That's it!

Make sure that the directory containing the private key files is set to 700

chmod 700 ~/.ec2

You can set shadow to your view from storyboard also

I think the best method :)

int angle = 0;
imageView.setOnClickListener(new View.OnClickListener() {
        @Override
        public void onClick(View v) {
            angle = angle + 90;
            imageView.setRotation(angle);
        }
    });

Step 1: Build a checked/unchecked selector:

selector.xml

<?xml version="1.0" encoding="utf-8"?>
<selector xmlns:android="http://schemas.android.com/apk/res/android">
    <item android:color="@color/yellow" android:state_checked="true" />
    <item android:color="@color/white" android:state_checked="false" />
</selector>

Step 2: use the xml attribute app:itemTextColor within NavigationView widget for selecting the text color.

<android.support.design.widget.NavigationView
    android:id="@+id/nav_view"
    android:layout_width="wrap_content"
    android:layout_height="match_parent"
    android:layout_gravity="start"
    app:headerLayout="@layout/navigation_header_layout"
    app:itemTextColor="@drawable/selector"
    app:menu="@menu/navigation_menu" />

Step 3:
For some reason when you hit an item from the NavigationView menu, it doesn't consider this as a button check. So you need to manually get the selected item checked and clear the previously selected item. Use below listener to do that

@Override
public boolean onNavigationItemSelected(@NonNull MenuItem item) {

    int id = item.getItemId();

    // remove all colors of the items to the `unchecked` state of the selector
    removeColor(mNavigationView);

    // check the selected item to change its color set by the `checked` state of the selector
    item.setChecked(true);

    switch (item.getItemId()) {
      case R.id.dashboard:
          ...
    }

    drawerLayout.closeDrawer(GravityCompat.START);
    return true;
}

private void removeColor(NavigationView view) {
    for (int i = 0; i < view.getMenu().size(); i++) {
        MenuItem item = view.getMenu().getItem(i);
        item.setChecked(false);
    }
}

Step 4:
To change icon color, use the app:iconTint attribute in the NavigationView menu items, and set to the same selector.

<?xml version="1.0" encoding="utf-8"?>
<menu xmlns:android="http://schemas.android.com/apk/res/android"
    xmlns:app="http://schemas.android.com/apk/res-auto">
    <item
        android:id="@+id/nav_account"
        android:checked="true"
        android:icon="@drawable/ic_person_black_24dp"
        android:title="My Account"
        app:iconTint="@drawable/selector" />
    <item
        android:id="@+id/nav_settings"
        android:icon="@drawable/ic_settings_black_24dp"
        android:title="Settings"
        app:iconTint="@drawable/selector" />

    <item
        android:id="@+id/nav_logout"
        android:icon="@drawable/logout"
        android:title="Log Out"
        app:iconTint="@drawable/selector" />
</menu>

Result:

A simpler way is to do xcopy to make a copy of the entire directory structure using /s switch. help for /s says Copies directories and subdirectories except empty ones.

xcopy dirA dirB /S

where dirA is source with Empty folders. DirB will be the copy without empty folders

On Windows, you can use WMI (home page, cheeseshop):

def memory():
    import os
    from wmi import WMI
    w = WMI('.')
    result = w.query("SELECT WorkingSet FROM Win32_PerfRawData_PerfProc_Process WHERE IDProcess=%d" % os.getpid())
    return int(result[0].WorkingSet)

On Linux (from python cookbook http://code.activestate.com/recipes/286222/:

import os
_proc_status = '/proc/%d/status' % os.getpid()

_scale = {'kB': 1024.0, 'mB': 1024.0*1024.0,
          'KB': 1024.0, 'MB': 1024.0*1024.0}

def _VmB(VmKey):
    '''Private.
    '''
    global _proc_status, _scale
     # get pseudo file  /proc/<pid>/status
    try:
        t = open(_proc_status)
        v = t.read()
        t.close()
    except:
        return 0.0  # non-Linux?
     # get VmKey line e.g. 'VmRSS:  9999  kB\n ...'
    i = v.index(VmKey)
    v = v[i:].split(None, 3)  # whitespace
    if len(v) < 3:
        return 0.0  # invalid format?
     # convert Vm value to bytes
    return float(v[1]) * _scale[v[2]]


def memory(since=0.0):
    '''Return memory usage in bytes.
    '''
    return _VmB('VmSize:') - since


def resident(since=0.0):
    '''Return resident memory usage in bytes.
    '''
    return _VmB('VmRSS:') - since


def stacksize(since=0.0):
    '''Return stack size in bytes.
    '''
    return _VmB('VmStk:') - since