Normally it is quite good to do:
echo isset($_GET['id']) ? $_GET['id'] : 'wtf';
This is so when assigning the var to other variables you can do defaults all in one breath instead of constantly using if
statements to just give them a default value if they are not set.
SELECT * from employees
WHERE NOT EXISTS (SELECT name FROM eotm_dyn)
Never returns any records unless eotm_dyn
is empty. You need to some kind of criteria on SELECT name FROM eotm_dyn
like
SELECT * from employees
WHERE NOT EXISTS (
SELECT name FROM eotm_dyn WHERE eotm_dyn.employeeid = employees.employeeid
)
assuming that the two tables are linked by a foreign key relationship. At this point you could use a variety of other options including a LEFT JOIN. The optimizer will typically handle them the same in most cases, however.
If you have data that has HTML tags and you want to display it so that a person can SEE the tags, use HttpServerUtility::HtmlEncode.
If you have data that has HTML tags in it and you want the user to see the tags rendered, then display the text as is. If the text represents an entire web page, use an IFRAME for it.
If you have data that has HTML tags and you want to strip out the tags and just display the unformatted text, use a regular expression.
Convert from human readable date to epoch:
long epoch = new java.text.SimpleDateFormat("MM/dd/yyyyHH:mm:ss").parse("01/01/1970 01:00:00").getTime() / 1000;
Convert from epoch to human readable date:
String date = new java.text.SimpleDateFormat("MM/dd/yyyyHH:mm:ss").format(new java.util.Date (epoch*1000));
For other language converter: https://www.epochconverter.com
Just throw any RuntimeException
from a method marked as @Transactional
.
By default all RuntimeException
s rollback transaction whereas checked exceptions don't. This is an EJB legacy. You can configure this by using rollbackFor()
and noRollbackFor()
annotation parameters:
@Transactional(rollbackFor=Exception.class)
This will rollback transaction after throwing any exception.
viewNoteDateMonth.text = [[displayDate objectAtIndex:2] uppercaseString];
You can also use lowercaseString and capitalizedString
The RestTemplate getForObject()
method does not support setting headers. The solution is to use the exchange()
method.
So instead of restTemplate.getForObject(url, String.class, param)
(which has no headers), use
HttpHeaders headers = new HttpHeaders();
headers.set("Header", "value");
headers.set("Other-Header", "othervalue");
...
HttpEntity entity = new HttpEntity(headers);
ResponseEntity<String> response = restTemplate.exchange(
url, HttpMethod.GET, entity, String.class, param);
Finally, use response.getBody()
to get your result.
This question is similar to this question.
In order to reduce crc32 to taking the reminder you need to:
In code this is:
func CRC32 (file []byte) uint32 {
for i , v := range(file) {
file[i] = bits.Reverse8(v)
}
for i := 0; i < 4; i++ {
file[i] ^= 0xFF
}
// Add padding
file = append(file, []byte{0, 0, 0, 0}...)
newReminder := bits.Reverse32(reminderIEEE(file))
return newReminder ^ 0xFFFFFFFF
}
where reminderIEEE is the pure reminder on GF(2)[x]
rm should remove the symbolic link.
skrall@skrall-desktop:~$ mkdir bar
skrall@skrall-desktop:~$ ln -s bar foo
skrall@skrall-desktop:~$ ls -l foo
lrwxrwxrwx 1 skrall skrall 3 2008-10-16 16:22 foo -> bar
skrall@skrall-desktop:~$ rm foo
skrall@skrall-desktop:~$ ls -l foo
ls: cannot access foo: No such file or directory
skrall@skrall-desktop:~$ ls -l bar
total 0
skrall@skrall-desktop:~$
wxWidgets is worth checking out. It is well supported on Ruby via wxRuby. For an example app, have a look at wxRIDE. See it compared to other toolkits. You might also want to check out Anvil, which is a sort of Rails-ish framework for working with wx. It looks moribund now, though.
You could use screen
, detach and reattach
This is how you should setup Eclipse Debugger for remote debugging:
Eclipse Settings:
1.Click the Run Button
2.Select the Debug Configurations
3.Select the “Remote Java Application”
4.New Configuration
For JBoss:
1.Change the /path/toJboss/jboss-eap-6.1/bin/standalone.conf
in your vm as follows:
Uncomment the following line by removing the #:
JAVA_OPTS="$JAVA_OPTS -agentlib:jdwp=transport=dt_socket,address=8787,server=y,suspend=n"
For Tomcat :
In catalina.bat file :
Step 1:
CATALINA_OPTS="-Xdebug -Xrunjdwp:transport=dt_socket,address=8000,server=y,suspend=n"
Step 2:
JPDA_OPTS="-agentlib:jdwp=transport=dt_socket,address=8000,server=y,suspend=n"
Step 3: Run Tomcat from command prompt like below:
catalina.sh jpda start
Then you need to set breakpoints in the Java classes you desire to debug.
if you want to get the whole period:
from sqlalchemy import and_, func
query = DBSession.query(User).filter(and_(func.date(User.birthday) >= '1985-01-17'),\
func.date(User.birthday) <= '1988-01-17'))
That means range: 1985-01-17 00:00 - 1988-01-17 23:59
Gradle Scripts ->
build.gradle (Module: app) ->
minSdkVersion (Your min sdk version)
Let's say you have 25 objects and want one process to handle any one objects click event. You could write 25 delegates or use a loop to handle the click event.
public form1()
{
foreach (Panel pl in Container.Components)
{
pl.Click += Panel_Click;
}
}
private void Panel_Click(object sender, EventArgs e)
{
// Process the panel clicks here
int index = Panels.FindIndex(a => a == sender);
...
}
Try this. It's very easy:
driver.getPageSource().contains("text to search");
This really worked for me in Selenium WebDriver.
The adb tool can be found in sdk/platform-tools/
If you don't see this directory in your SDK, launch the SDK Manager and install "Android SDK Platform-tools"
Also update your PATH environment variable to include the platform-tools/ directory, so you can execute adb from any location.
You are missing the std namespace reference in the cc file. You should also call nom.c_str()
because there is no implicit conversion from std::string
to const char *
expected by ifstream
's constructor.
Polygone::Polygone(std::string nom) {
std::ifstream fichier (nom.c_str(), std::ifstream::in);
// ...
}
array_pop(explode("/", "http://vimeo.com/1234567"));
will return the last element of the example url
Whilst it is NOT possible to use HTML to format your email body you can add line breaks as has been previously suggested.
If you are able to use javascript then "encodeURIComponent()" might be of use like below...
var formattedBody = "FirstLine \n Second Line \n Third Line";
var mailToLink = "mailto:[email protected]?body=" + encodeURIComponent(formattedBody);
window.location.href = mailToLink;
I've tried everything suggested here but didn't work for me. So in case I can help anyone with a similar issue, every single tutorial I've checked is not updated to work with version 4.
Here is what I've done to make it work
import React from 'react';
import App from './App';
import ReactDOM from 'react-dom';
import {
HashRouter,
Route
} from 'react-router-dom';
ReactDOM.render((
<HashRouter>
<div>
<Route path="/" render={()=><App items={temasArray}/>}/>
</div>
</HashRouter >
), document.getElementById('root'));
That's the only way I have managed to make it work without any errors or warnings.
In case you want to pass props to your component for me the easiest way is this one:
<Route path="/" render={()=><App items={temasArray}/>}/>
I imagine that trygetvalue is doing something more like:
if(myDict.ReallyOptimisedVersionofContains(someKey))
{
someVal = myDict[someKey];
return true;
}
return false;
So hopefully no try/catch anywhere.
I think it is just a method of convenience really. I generally use it as it saves a line of code or two.
If you want to reset the selected options
$('select option:selected').removeAttr('selected');
If you actually want to remove the options (although I don't think you mean this).
$('select').empty();
Substitute select
for the most appropriate selector in your case (this may be by id or by CSS class). Using as is will reset all <select>
elements on the page
Here are the READY TO USE METHODS:
To invoke a method, without Arguments:
public static void callMethodByName(Object object, String methodName) throws IllegalAccessException, InvocationTargetException, NoSuchMethodException {
object.getClass().getDeclaredMethod(methodName).invoke(object);
}
To invoke a method, with Arguments:
public static void callMethodByName(Object object, String methodName, int i, String s) throws IllegalAccessException, InvocationTargetException, NoSuchMethodException {
object.getClass().getDeclaredMethod(methodName, int.class, String.class).invoke(object, i, s);
}
Use the above methods as below:
package practice;
import java.io.IOException;
import java.lang.reflect.InvocationTargetException;
public class MethodInvoke {
public static void main(String[] args) throws ClassNotFoundException, NoSuchMethodException, SecurityException, IllegalAccessException, IllegalArgumentException, InvocationTargetException, IOException {
String methodName1 = "methodA";
String methodName2 = "methodB";
MethodInvoke object = new MethodInvoke();
callMethodByName(object, methodName1);
callMethodByName(object, methodName2, 1, "Test");
}
public static void callMethodByName(Object object, String methodName) throws IllegalAccessException, InvocationTargetException, NoSuchMethodException {
object.getClass().getDeclaredMethod(methodName).invoke(object);
}
public static void callMethodByName(Object object, String methodName, int i, String s) throws IllegalAccessException, InvocationTargetException, NoSuchMethodException {
object.getClass().getDeclaredMethod(methodName, int.class, String.class).invoke(object, i, s);
}
void methodA() {
System.out.println("Method A");
}
void methodB(int i, String s) {
System.out.println("Method B: "+"\n\tParam1 - "+i+"\n\tParam 2 - "+s);
}
}
Output:
Method A Method B: Param1 - 1 Param 2 - Test
my solution works as follows:
import UIKit
class LoginViewController: UIViewController, NSURLConnectionDataDelegate {
@IBOutlet var usernameTextField: UITextField
@IBOutlet var passwordTextField: UITextField
@IBAction func login(sender: AnyObject) {
var url = NSURL(string: "YOUR_URL")
var request = NSURLRequest(URL: url)
var connection = NSURLConnection(request: request, delegate: self, startImmediately: true)
}
func connection(connection:NSURLConnection!, willSendRequestForAuthenticationChallenge challenge:NSURLAuthenticationChallenge!) {
if challenge.previousFailureCount > 1 {
} else {
let creds = NSURLCredential(user: usernameTextField.text, password: passwordTextField.text, persistence: NSURLCredentialPersistence.None)
challenge.sender.useCredential(creds, forAuthenticationChallenge: challenge)
}
}
func connection(connection:NSURLConnection!, didReceiveResponse response: NSURLResponse) {
let status = (response as NSHTTPURLResponse).statusCode
println("status code is \(status)")
// 200? Yeah authentication was successful
}
override func viewDidLoad() {
super.viewDidLoad()
}
override func didReceiveMemoryWarning() {
super.didReceiveMemoryWarning()
}
}
You can use this class as the implementation of a ViewController. Connect your fields to the IBOutlet annotated vars and your Button to the IBAction annotated function.
Explanation: In function login you create your request with NSURL, NSURLRequest and NSURLConnection. Essential here is the delegate which references to this class (self). For receiving the delegates calls you need to
I have a sample like this on vuejs version: v2.5.2
<form action="url" method="post" enctype="multipart/form-data">
<div class="col-md-6">
<input type="file" class="image_0" name="FilesFront" ref="FilesFront" />
</div>
<div class="col-md-6">
<input type="file" class="image_1" name="FilesBack" ref="FilesBack" />
</div>
</form>
<script>
Vue.component('v-bl-document', {
template: '#document-item-template',
props: ['doc'],
data: function () {
return {
document: this.doc
};
},
methods: {
submit: function () {
event.preventDefault();
var data = new FormData();
var _doc = this.document;
Object.keys(_doc).forEach(function (key) {
data.append(key, _doc[key]);
});
var _refs = this.$refs;
Object.keys(_refs).forEach(function (key) {
data.append(key, _refs[key].files[0]);
});
debugger;
$.ajax({
type: "POST",
data: data,
url: url,
cache: false,
contentType: false,
processData: false,
success: function (result) {
//do something
},
});
}
}
});
</script>
One way to programmatically "click" the button, if you have access to the source, is to simply call the button's OnClick event handler (or Execute the ICommand associated with the button, if you're doing things in the more WPF-y manner).
Why are you doing this? Are you doing some sort of automated testing, for example, or trying to perform the same action that the button performs from a different section of code?
I am also facing same issue in Hortonworks
At the time I restart the Ambari agents and servers then the issue has been resolved.
systemctl stop ambari-agent
systemctl stop ambari-server
Source :Full Article With Resolution
systemctl start ambari-agent
systemctl start ambari-server
I just had this problem.
In my case, the problem was due to problems when downloading the packages for GCC. The mingw-get program thought it finished the download, but it didn't.
I wanted to upgrade GCC, so I used mingw-get to get the newer version. For some reason, mingw-get thought the download for a particular file was finished, but it wasn't. When it went to extract the file, I guess it issued an error (which I didn't even bother to look -- I just ran "mingw-get update && mingw-get install mingw32-gcc" and left it there).
To solve, I removed gcc by doing "mingw-get remove mingw32-gcc" and also removed the package file (the one mingw-get didn't fully download), which was in the mingw cache folder ("C:\MinGW\var\cache\mingw-get\packages" in my system), then ran the install command again. It download and installed the missing parts of GCC (it had not fully downloaded the package gcc-core).
That solved my problem.
Interestingly enough, mingw-get was smart enough to continue the download of gcc-core even after me having deleted the package file in the cache folder, and also removed the package mingw32-gcc.
I think the more fundamental problem was that since gcc-core files were not installed, cc1 wasn't there. And gcc uses cc1. I guess that, when gcc tried to start cc1, it used CreateProcess somewhere passing the path of cc1, which was not the path of an existing file. Thus the error message.
A subset of Java 8 is supported now on Android Studio. Just make the Source and Target Compatibility adjustments from the window below:
File --> Project Structure
More information is given in the below link.
https://developer.android.com/studio/write/java8-support.html
You can over that by using GROUP BY
like this:
SELECT ID, Email, ProductName, ProductModel
FROM Products
GROUP BY Email
Active record method or_where
is to be used:
$this->db->select("*")
->from("table_name")
->where("first", $first)
->or_where("second", $second);
No one of these answers gave me the solution, only worked with this:
mySpinner.post(new Runnable() {
@Override
public void run() {
mySpinner.setSelection(position);
}
});
In the eclipse Version: 2019-09 R (4.13.0) on windows Go to Window > preferences > Appearance Select the required theme for dark theme to choose Dark and click on Ok.
They're equivalent. The access is the same.
The import is just a convention to save you from having to type the fully-resolved class name each time. You can write all your Java without using import, as long as you're a fast touch typer.
But there's no difference in efficiency or class loading.
This can be done using an attribute selector.
[class~='list']:last-of-type {
background: #000;
}
The class~
selects a specific whole word. This allows your list item to have multiple classes if need be, in various order. It'll still find the exact class "list" and apply the style to the last one.
See a working example here: http://codepen.io/chasebank/pen/ZYyeab
Read more on attribute selectors:
http://css-tricks.com/attribute-selectors/ http://www.w3schools.com/css/css_attribute_selectors.asp
To answer your question I look at it this way practically: a lot of programmers (not all) invoke namespace std. Therefore one should be in the habit of NOT using things that impinge or use the same names as what is in the namespace std. That is a great deal granted, but not so much compared to the number of possible coherent words and pseudonyms that can be come up with strictly speaking.
I mean really... saying "don't rely on this being present" is just setting you up to rely on it NOT being present. You are constantly going to have issues borrowing code snippets and constantly repairing them. Just keep your user-defined and borrowed stuff in limited scope as they should be and be VERY sparing with globals (honestly globals should almost always be a last resort for purposes of "compile now, sanity later"). Truly I think it is bad advice from your teacher because using std will work for both "cout" and "std::cout" but NOT using std will only work for "std::cout". You will not always be fortunate enough to write all your own code.
NOTE: Don't focus too much on efficiency issues until you actually learn a little about how compilers work. With a little experience coding you don't have to learn that much about them before you realize how much they are able to generalize good code into something something simple. Every bit as simple as if you wrote the whole thing in C. Good code is only as complex as it needs to be.
Python 3
class MyClass(object):
= New-style classclass MyClass:
= New-style class (implicitly inherits from object
)Python 2
class MyClass(object):
= New-style classclass MyClass:
= OLD-STYLE CLASSExplanation:
When defining base classes in Python 3.x, you’re allowed to drop the object
from the definition. However, this can open the door for a seriously hard to track problem…
Python introduced new-style classes back in Python 2.2, and by now old-style classes are really quite old. Discussion of old-style classes is buried in the 2.x docs, and non-existent in the 3.x docs.
The problem is, the syntax for old-style classes in Python 2.x is the same as the alternative syntax for new-style classes in Python 3.x. Python 2.x is still very widely used (e.g. GAE, Web2Py), and any code (or coder) unwittingly bringing 3.x-style class definitions into 2.x code is going to end up with some seriously outdated base objects. And because old-style classes aren’t on anyone’s radar, they likely won’t know what hit them.
So just spell it out the long way and save some 2.x developer the tears.
if your array looks like
array = [
{:name => "Hitesh" , :age => 27 , :place => "xyz"} ,
{:name => "John" , :age => 26 , :place => "xtz"} ,
{:name => "Anil" , :age => 26 , :place => "xsz"}
]
And you Want To know if some value is already present in your array. Use Find Method
array.find {|x| x[:name] == "Hitesh"}
This will return object if Hitesh is present in name otherwise return nil
You can use inbuilt library pickle
This library allows you to save any object in python to a file
This library will maintain the format as well
import pickle
with open('/content/list_1.txt', 'wb') as fp:
pickle.dump(list_1, fp)
you can also read the list back as an object using same library
with open ('/content/list_1.txt', 'rb') as fp:
list_1 = pickle.load(fp)
reference : Writing a list to a file with Python
$(( ( RANDOM % 10 ) + 1 ))
EDIT. Changed brackets into parenthesis according to the comment. http://web.archive.org/web/20150206070451/http://islandlinux.org/howto/generate-random-numbers-bash-scripting
Here is a quick summary of the segues and an example for each type.
Show - Pushes the destination view controller onto the navigation stack, sliding overtop from right to left, providing a back button to return to the source - or if not embedded in a navigation controller it will be presented modally
Example: Navigating inboxes/folders in Mail
Show Detail - For use in a split view controller, replaces the detail/secondary view controller when in an expanded 2 column interface, otherwise if collapsed to 1 column it will push in a navigation controller
Example: In Messages, tapping a conversation will show the conversation details - replacing the view controller on the right when in a two column layout, or push the conversation when in a single column layout
Present Modally - Presents a view controller in various animated fashions as defined by the Presentation option, covering the previous view controller - most commonly used to present a view controller that animates up from the bottom and covers the entire screen on iPhone, or on iPad it's common to present it as a centered box that darkens the presenting view controller
Example: Selecting Touch ID & Passcode in Settings
Popover Presentation - When run on iPad, the destination appears in a popover, and tapping anywhere outside of this popover will dismiss it, or on iPhone popovers are supported as well but by default it will present the destination modally over the full screen
Example: Tapping the + button in Calendar
Custom - You may implement your own custom segue and have control over its behavior
The deprecated segues are essentially the non-adaptive equivalents of those described above. These segue types were deprecated in iOS 8: Push, Modal, Popover, Replace.
For more info, you may read over the Using Segues documentation which also explains the types of segues and how to use them in a Storyboard. Also check out Session 216 Building Adaptive Apps with UIKit from WWDC 2014. They talked about how you can build adaptive apps using these new Adaptive Segues, and they built a demo project that utilizes these segues.
If you are in event context, in jQuery, you can retrieve the selected option element using :
$(this).find('option:selected')
like this :
$('dropdown_selector').change(function() {
//Use $option (with the "$") to see that the variable is a jQuery object
var $option = $(this).find('option:selected');
//Added with the EDIT
var value = $option.val();//to get content of "value" attrib
var text = $option.text();//to get <option>Text</option> content
});
Edit
As mentioned by PossessWithin, My answer just answer to the question : How to select selected "Option".
Next, to get the option value, use option.val()
.
Put an int
which is your id into the new Intent
.
Intent intent = new Intent(FirstActivity.this, SecondActivity.class);
Bundle b = new Bundle();
b.putInt("key", 1); //Your id
intent.putExtras(b); //Put your id to your next Intent
startActivity(intent);
finish();
Then grab the id in your new Activity
:
Bundle b = getIntent().getExtras();
int value = -1; // or other values
if(b != null)
value = b.getInt("key");
IntPtr GetIntPtr(Byte[] byteBuf)
{
IntPtr ptr = Marshal.AllocHGlobal(byteBuf.Length);
for (int i = 0; i < byteBuf.Length; i++)
{
Marshal.WriteByte(ptr, i, byteBuf[i]);
}
return ptr;
}
You can't delete the app , but you can unpublish it . By doing so , it won't be available in play store but the user having your application will still be able to use your app .
Steps to follow to un-publish your app : To unpublish your app on the Google Play store:
echo $'Create the snapshots\nSnapshot created\n'
This can be done from the command line. This will create a column for your image with a NOT NULL
property.
CREATE TABLE `test`.`pic` (
`idpic` INTEGER UNSIGNED NOT NULL AUTO_INCREMENT,
`caption` VARCHAR(45) NOT NULL,
`img` LONGBLOB NOT NULL,
PRIMARY KEY(`idpic`)
)
TYPE = InnoDB;
From here
Ummm, How about this.
Copy your cells.
Open Notepad.
Paste.
Look no quotes, no inverted commas, and retains special characters, which is what the OP asked for. Its also delineated by carriage returns, same as the attached pict which the OP didn't mention as a bad thing (or a good thing).
Not really sure why a simple answer, that delivers the desired results, gets me a negative mark.
Just use Array#sample
:
[:foo, :bar].sample # => :foo, or :bar :-)
It is available in Ruby 1.9.1+. To be also able to use it with an earlier version of Ruby, you could require "backports/1.9.1/array/sample"
.
Note that in Ruby 1.8.7 it exists under the unfortunate name choice
; it was renamed in later version so you shouldn't use that.
Although not useful in this case, sample
accepts a number argument in case you want a number of distinct samples.
I'm using Xcode 6 beta 5 on a Swift project, for an iOS 7 app.
Here is what I did, and it works:
info.plist:
The HTML tags that you want to edit is called the DOM (Document object manipulate), you can edit the DOM with many functions in the document global object.
The best example that would work on almost any browser is the document.getElementById
, it's search for html tag with that id set as an attribute.
There is another option which is easier but works only on modern browsers (IE8+), the querySelector function, it's will find the first element with the matched selector (CSS selectors).
Examples for both options:
<script>_x000D_
var name = prompt("What's your name?");_x000D_
var lengthOfName = name.length_x000D_
</script>_x000D_
<body>_x000D_
<p id="a"></p>_x000D_
<p id="b"></p>_x000D_
<script>_x000D_
document.getElementById('a').innerHTML = name;_x000D_
document.querySelector('#b').innerHTML = name.length;</script>_x000D_
</body>
_x000D_
This stratify
parameter makes a split so that the proportion of values in the sample produced will be the same as the proportion of values provided to parameter stratify
.
For example, if variable y
is a binary categorical variable with values 0
and 1
and there are 25% of zeros and 75% of ones, stratify=y
will make sure that your random split has 25% of 0
's and 75% of 1
's.
Why not just use $('#msform').hide()
? Behind the scene jQuery's hide
and show
just set display: none
or display: block
.
hide()
will not change the style if already hidden.
based on the comment below, you are removing all style with removeAttr("style")
, in which case call hide()
immediately after that.
e.g.
$("#msform").removeAttr("style").hide();
The reverse of this is of course show()
as in
$("#msform").show();
Or, more interestingly, toggle()
, which effective flips between hide()
and show()
based on the current state.
To answer you first question:
Yes, it means that 1 byte allocates for 1 character. Look at this example
SQL> conn / as sysdba
Connected.
SQL> create table test (id number(10), v_char varchar2(10));
Table created.
SQL> insert into test values(11111111111,'darshan');
insert into test values(11111111111,'darshan')
*
ERROR at line 1:
ORA-01438: value larger than specified precision allows for this column
SQL> insert into test values(11111,'darshandarsh');
insert into test values(11111,'darshandarsh')
*
ERROR at line 1:
ORA-12899: value too large for column "SYS"."TEST"."V_CHAR" (actual: 12,
maximum: 10)
SQL> insert into test values(111,'Darshan');
1 row created.
SQL>
And to answer your next one:
The difference between varchar2
and varchar
:
VARCHAR
can store up to 2000 bytes
of characters while VARCHAR2
can store up to 4000 bytes
of characters.VARCHAR
then it will occupy space for NULL values
, In case of VARCHAR2
datatype it will not
occupy any space.if you want to encode or decode an array from or to JSON you can use these functions
$myJSONString = json_encode($myArray);
$myArray = json_decode($myString);
json_encode will result in a JSON string, built from an (multi-dimensional) array. json_decode will result in an Array, built from a well formed JSON string
with json_decode you can take the results from the API and only output what you want, for example:
echo $myArray['payload']['ign'];
For Java:
X, exactly n times: X{n}
X, at least n times: X{n,}
X, at least n but not more than m times: X{n,m}
Try this
Installing with Anaconda
conda create --name tensorflow python=3.5
activate tensorflow
conda install jupyter
conda install scipy
pip install tensorflow
or
pip install tensorflow-gpu
It is important to add python=3.5 at the end of the first line, because it will install Python 3.5.
PHP-FPM is a service that spawns new PHP processes when needed, usually through a fast-cgi module like nginx. You can tell (with a margin of error) by just checking the init.d script e.g. "sudo /etc/init.d/php-fpm status"
What port or unix file socket is being used is up to the configuration, but often is just TCP port 9000. i.e. 127.0.0.1:9000
The best way to tell if it is running correctly is to have nginx running, and setup a virtual host that will fast-cgi pass to PHP-FPM, and just check it with wget or a browser.
Suppose your "Don't Check" list is on Sheet2 in cells A1:A100
, say, and your current client IDs are in Sheet1 in Column A.
What you would do is:
Conditional Formatting
> New Rule
> Use a Formula to determine which cells to format
=ISNUMBER(MATCH($A1,Sheet2!$A$1:$A$100,0))
and select how you want those rows formattedAnd that should do the trick.
use this command php artisan migrate --path=/database/migrations/my_migration.php
it worked for me..
As the error says Failed to find build Tools revision 23.0.1 This means that in your project you have used buildToolsVersion "23.0.3" So,You need to download the exact same version this makes the error disappear
**Step 1:** GO to Tools and click SDK Manager **Step 2:** you can see SDK Platforms ,SDK Tools and SDK update Sites **Step3:** Click SDK Tools and click show package details **Step 4:** Select the version that you have mentioned in your Project These Steps has solved my issue.
If NEW_TABLE already exists then ...
insert into new_table
select * from old_table
/
If you want to create NEW_TABLE based on the records in OLD_TABLE ...
create table new_table as
select * from old_table
/
If the purpose is to create a new but empty table then use a WHERE clause with a condition which can never be true:
create table new_table as
select * from old_table
where 1 = 2
/
Remember that CREATE TABLE ... AS SELECT creates only a table with the same projection as the source table. The new table does not have any constraints, triggers or indexes which the original table might have. Those still have to be added manually (if they are required).
Both will works perfectly in mysqli_fetch_array in while loops
while($row = mysqli_fetch_array($result,MYSQLI_BOTH)) {
$posts[] = $row['post_id'].$row['post_title'].$row['content'];
}
(OR)
while($row = mysqli_fetch_array($result,MYSQLI_ASSOC)) {
$posts[] = $row['post_id'].$row['post_title'].$row['content'];
}
mysqli_fetch_array() - has second argument $resulttype.
MYSQLI_ASSOC: Fetch associative array
MYSQLI_NUM: Fetch numeric array
MYSQLI_BOTH: Fetch both associative and numeric array.
This should do the job:
const createQueryParams = params =>
Object.keys(params)
.map(k => `${k}=${encodeURI(params[k])}`)
.join('&');
Example:
const params = { name : 'John', postcode: 'W1 2DL'}
const queryParams = createQueryParams(params)
Result:
name=John&postcode=W1%202DL
Can also export functions from dll and import from the exe, it is more tricky at first but in the end is much easier than calling LoadLibrary/GetProcAddress. See MSDN.
When creating the project with the VS wizard there's a check box in the dll that let you export functions.
Then, in the exe application you only have to #include a header from the dll with the proper definitions, and add the dll project as a dependency to the exe application.
Check this other question if you want to investigate this point further Exporting functions from a DLL with dllexport.
You can use this selector to undermouse object and then manipulate it as a jQuery object:
$(':hover').last();
When converting SVG to transparent PNG, don't forget to put this BEFORE $imagick->readImageBlob()
:
$imagick->setBackgroundColor(new ImagickPixel('transparent'));
I meet this problem and find there are some Chinese characters in my path. After change these characters into English , the problem solved.
From this document, this DTU percent is determined by this query:
SELECT end_time,
(SELECT Max(v)
FROM (VALUES (avg_cpu_percent), (avg_data_io_percent),
(avg_log_write_percent)) AS
value(v)) AS [avg_DTU_percent]
FROM sys.dm_db_resource_stats;
looks like the max of avg_cpu_percent
, avg_data_io_percent
and avg_log_write_percent
Reference:
I made a wider input field by using either span4 or span6 as class.
<input type="text" class="span6 input-large search-query">
This way you don't need the additional custom css, mentioned earlier.
CleanProject - Cleans Visual Studio Solutions
How many times have you wanted to send a project to a friend or upload it to a web site like MSDN Code Gallery only to find that your zip file has lots of stuff that you don't need to send in it making the file larger than it needs to be.
bin folder obj folder TestResults folder Resharper folders And then if you forget about removing Source Control bindings whoever gets your project will be prompted about that. As someone who does this process a great deal I decided to share with you my code for cleaning a project.
None of the suggested solutions worked for me but this did.
Something is blocking the execution of the query. Most likely another query updating, inserting or deleting from one of the tables in your query. You have to find out what that is:
SHOW PROCESSLIST;
Once you locate the blocking process, find its id
and run :
KILL {id};
Re-run your initial query.
Yes you can handle with the catch operator like this and show alert as you want but firstly you have to import Rxjs
for the same like this way
import {Observable} from 'rxjs/Rx';
return this.http.request(new Request(this.requestoptions))
.map((res: Response) => {
if (res) {
if (res.status === 201) {
return [{ status: res.status, json: res }]
}
else if (res.status === 200) {
return [{ status: res.status, json: res }]
}
}
}).catch((error: any) => {
if (error.status === 500) {
return Observable.throw(new Error(error.status));
}
else if (error.status === 400) {
return Observable.throw(new Error(error.status));
}
else if (error.status === 409) {
return Observable.throw(new Error(error.status));
}
else if (error.status === 406) {
return Observable.throw(new Error(error.status));
}
});
}
also you can handel error (with err block) that is throw by catch block while .map
function,
like this -
...
.subscribe(res=>{....}
err => {//handel here});
as required for any status without checking particluar one you can try this: -
return this.http.request(new Request(this.requestoptions))
.map((res: Response) => {
if (res) {
if (res.status === 201) {
return [{ status: res.status, json: res }]
}
else if (res.status === 200) {
return [{ status: res.status, json: res }]
}
}
}).catch((error: any) => {
if (error.status < 400 || error.status ===500) {
return Observable.throw(new Error(error.status));
}
})
.subscribe(res => {...},
err => {console.log(err)} );
Firebug as Firefox (FF) extension is currently (as per 01/2017) the only way to debug direct javascript responses from AJAX calls. Unfortunately, it's development is discontinued. And since Firefox 50, the Firebug also cannot be installed anymore due to compatability issues :-( They kind of emulated FF developer tools UI to recall Firebug UI in some way.
Unfortunatelly, FF native developer tools are not able to debug javascript returned directly by AJAX calls. Same applies to Chrome devel. tools.
I must have disabled upgrades of FF due to this issue, since I badly need to debug JS from XHR calls on current project. So not good news here - let's hope the feature to debug direct JS responses will be incorporated into FF/Chrome developer tools soon.
Just for the fun of it, another way without using any extra variable would be:
var arr = [1, 2, 3, 4, 5, 6, 7, 8, 9];_x000D_
_x000D_
// swap index 0 and 2_x000D_
arr[arr.length] = arr[0]; // copy idx1 to the end of the array_x000D_
arr[0] = arr[2]; // copy idx2 to idx1_x000D_
arr[2] = arr[arr.length-1]; // copy idx1 to idx2_x000D_
arr.length--; // remove idx1 (was added to the end of the array)_x000D_
_x000D_
_x000D_
console.log( arr ); // -> [3, 2, 1, 4, 5, 6, 7, 8, 9]
_x000D_
You will need to repeat your call to strtol
inside your loops where you are asking the user to try again. In fact, if you make the loop a do { ... } while(...);
instead of while, you don't get a the same sort of repeat things twice behaviour.
You should also format your code so that it's possible to see where the code is inside a loop and not.
You can't use an initialization-list for a struct
after it's been initialized. You've already default-initialized the two Customer
structs when you declared the array customerRecords
. Therefore you're going to have either use member-access syntax to set the value of the non-static data members, initialize the structs using a list of initialization lists when you declare the array itself, or you can create a constructor for your struct and use the default operator=
member function to initialize the array members.
So either of the following could work:
Customer customerRecords[2];
customerRecords[0].uid = 25;
customerRecords[0].name = "Bob Jones";
customerRecords[1].uid = 25;
customerRecords[1].namem = "Jim Smith";
Or if you defined a constructor for your struct like:
Customer::Customer(int id, string input_name): uid(id), name(input_name) {}
You could then do:
Customer customerRecords[2];
customerRecords[0] = Customer(25, "Bob Jones");
customerRecords[1] = Customer(26, "Jim Smith");
Or you could do the sequence of initialization lists that Tuomas used in his answer. The reason his initialization-list syntax works is because you're actually initializing the Customer
structs at the time of the declaration of the array, rather than allowing the structs to be default-initialized which takes place whenever you declare an aggregate data-structure like an array.
What you need to do is this:
int[] list1 = new int[4] { 1, 2, 3, 4};
int[] list2 = new int[4] { 5, 6, 7, 8};
int[] list3 = new int[4] { 1, 3, 2, 1 };
int[] list4 = new int[4] { 5, 4, 3, 2 };
int[][] lists = new int[][] { list1 , list2 , list3 , list4 };
Another alternative would be to create a List<int[]>
type:
List<int[]> data=new List<int[]>(){list1,list2,list3,list4};
For people who find this via search engines, you do not need VBA. You can just:
1.) select the query or table with your mouse
2.) click export data from the ribbon
3.) click excel from the export subgroup
4.) follow the wizard to select the output file and location.
There must be more to a Python dictionary than a table lookup on hash(). By brute experimentation I found this hash collision:
>>> hash(1.1)
2040142438
>>> hash(4504.1)
2040142438
Yet it doesn't break the dictionary:
>>> d = { 1.1: 'a', 4504.1: 'b' }
>>> d[1.1]
'a'
>>> d[4504.1]
'b'
Sanity check:
>>> for k,v in d.items(): print(hash(k))
2040142438
2040142438
Possibly there's another lookup level beyond hash() that avoids collisions between dictionary keys. Or maybe dict() uses a different hash.
(By the way, this in Python 2.7.10. Same story in Python 3.4.3 and 3.5.0 with a collision at hash(1.1) == hash(214748749.8)
.)
A quick hack that may suit your needs..
Take off the frame of the box and manually position the two legends next to each other. Something like this..
ax1.legend(loc = (.75,.1), frameon = False)
ax2.legend( loc = (.75, .05), frameon = False)
Where the loc tuple is left-to-right and bottom-to-top percentages that represent the location in the chart.
My solution is simple. I am using [href] instead of [routerLink]. I have tried all solutions for [routerLink]. None of them works in my case.
Here is my solution:
<a [href]="getPlanUrl()" target="_blank">My Plan Name</a>
Then write the getPlanUrl
function in the TS file.
On localhost you should consider context path.
function wsURL(path) {
var protocol = (location.protocol === 'https:') ? 'wss://' : 'ws://';
var url = protocol + location.host;
if(location.hostname === 'localhost') {
url += '/' + location.pathname.split('/')[1]; // add context path
}
return url + path;
}
How about:
Dir["/path/to/directory/*.rb"].each {|file| require file }
There are a few libraries that help out here. For cmdline tools I sometimes use colorama.
e.g.
from colorama import init, Fore, Back, Style
init()
def cprint(msg, foreground = "black", background = "white"):
fground = foreground.upper()
bground = background.upper()
style = getattr(Fore, fground) + getattr(Back, bground)
print(style + msg + Style.RESET_ALL)
cprint("colorful output, wohoo", "red", "black")
But instead of using strings, you might want to use an enum and/or add a few checks. Not the prettiest solution, but works on osx/linux and windows and is easy to use.
Other threads about this topic and cross-platform support: e.g. here.
Assume the following code:
import torch
import numpy as np
a = torch.tensor([1, 2, 3, 4, 5])
The following three calls have the exact same effect:
res_1 = a.unsqueeze(0)
res_2 = a.view(1, 5)
res_3 = a[np.newaxis,:]
res_1.shape == res_2.shape == res_3.shape == (1,5) # Returns true
Notice that for any of the resulting tensors, if you modify the data in them, you are also modifying the data in a, because they don't have a copy of the data, but reference the original data in a.
res_1[0,0] = 2
a[0] == res_1[0,0] == 2 # Returns true
The other way of doing it would be using the resize_
in place operation:
a.shape == res_1.shape # Returns false
a.reshape_((1, 5))
a.shape == res_1.shape # Returns true
Be careful of using resize_
or other in-place operation with autograd
. See the following discussion: https://pytorch.org/docs/stable/notes/autograd.html#in-place-operations-with-autograd
Just try the following coding...very simple to generate CSV with the values of HTML Tables. No browser issues will come
<!DOCTYPE html>
<html>
<head>
<script src="http://ajax.googleapis.com/ajax/libs/jquery/1.11.3/jquery.min.js"></script>
<script src="http://www.csvscript.com/dev/html5csv.js"></script>
<script>
$(document).ready(function() {
$('table').each(function() {
var $table = $(this);
var $button = $("<button type='button'>");
$button.text("Export to CSV");
$button.insertAfter($table);
$button.click(function() {
CSV.begin('table').download('Export.csv').go();
});
});
})
</script>
</head>
<body>
<div id='PrintDiv'>
<table style="width:100%">
<tr>
<td>Jill</td>
<td>Smith</td>
<td>50</td>
</tr>
<tr>
<td>Eve</td>
<td>Jackson</td>
<td>94</td>
</tr>
<tr>
<td>John</td>
<td>Doe</td>
<td>80</td>
</tr>
</table>
</div>
</body>
</html>
Just use BlueM/tree php class for make tree of a self-relation table in mysql.
Tree and Tree\Node are PHP classes for handling data that is structured hierarchically using parent ID references. A typical example is a table in a relational database where each record’s “parent” field references the primary key of another record. Of course, Tree cannot only use data originating from a database, but anything: you supply the data, and Tree uses it, regardless of where the data came from and how it was processed. read more
Here is an example of using BlueM/tree:
<?php
require '/path/to/vendor/autoload.php'; $db = new PDO(...); // Set up your database connection
$stm = $db->query('SELECT id, parent, title FROM tablename ORDER BY title');
$records = $stm->fetchAll(PDO::FETCH_ASSOC);
$tree = new BlueM\Tree($records);
...
You have to do this for each File:
public static void deleteFolder(File folder) {
File[] files = folder.listFiles();
if(files!=null) { //some JVMs return null for empty dirs
for(File f: files) {
if(f.isDirectory()) {
deleteFolder(f);
} else {
f.delete();
}
}
}
folder.delete();
}
Then call
deleteFolder(outputFolder);
Since you're using PHP, you will probably need to use the CURLOPT_PORT
option, like so:
curl_setopt($ch, CURLOPT_PORT, 11740);
Bear in mind, you may face problems with SELinux:
Get fields where a timestamp is greater than date in postgresql:
SELECT * from yourtable
WHERE your_timestamp_field > to_date('05 Dec 2000', 'DD Mon YYYY');
Subtract minutes from timestamp in postgresql:
SELECT * from yourtable
WHERE your_timestamp_field > current_timestamp - interval '5 minutes'
Subtract hours from timestamp in postgresql:
SELECT * from yourtable
WHERE your_timestamp_field > current_timestamp - interval '5 hours'
Here is my version. Features:
script:
#!/bin/bash
# $1 - cmd
# $2 - args
# return: 0 - no error, running; 1 - error, not running
function isRunning() {
for i in $(pidof $1); do
cat /proc/$i/cmdline | tr '\000' ' ' | grep -F -e "$2" 1>&2> /dev/null
if [ $? -eq 0 ]; then
return 0
fi
done
return 1
}
isRunning java "-Djava.util.logging.config.file=logging.properties"
if [ $? -ne 0 ]; then
echo "not running, starting..."
fi
You can try the this class to displays an image read from a URL within a JFrame.
public class ShowImageFromURL {
public static void show(String urlLocation) {
Image image = null;
try {
URL url = new URL(urlLocation);
URLConnection conn = url.openConnection();
conn.setRequestProperty("User-Agent", "Mozilla/5.0");
conn.connect();
InputStream urlStream = conn.getInputStream();
image = ImageIO.read(urlStream);
JFrame frame = new JFrame();
JLabel lblimage = new JLabel(new ImageIcon(image));
frame.getContentPane().add(lblimage, BorderLayout.CENTER);
frame.setSize(image.getWidth(null) + 50, image.getHeight(null) + 50);
frame.setVisible(true);
} catch (IOException e) {
System.out.println("Something went wrong, sorry:" + e.toString());
e.printStackTrace();
}
}
}
Ref : https://gist.github.com/aslamanver/92af3ac67406cfd116b7e4e177156926
Note that Python classes are also callable.
To get functions (and by functions we mean standard functions and lambdas) use:
import types
def is_func(obj):
return isinstance(obj, (types.FunctionType, types.LambdaType))
def f(x):
return x
assert is_func(f)
assert is_func(lambda x: x)
With latest version of windows (e.g. Windows 10, other servers), type/search for "Developers Command prompt.." It will pop up the relevant command prompt for the Visual Studio version.
e.g. Developer Command Prompt for VS 2015
More here https://msdn.microsoft.com/en-us/library/ms229859(v=vs.110).aspx
Look here http://docs.oracle.com/javase/6/docs/api/java/awt/Font.html#deriveFont%28float%29
JComponent has a setFont() method. You will control the font there, not on the String.
Such as
JButton b = new JButton();
b.setFont(b.getFont().deriveFont(18.0f));
For Swift 4.2 / Alamofire 4.7.3
Alamofire.upload(multipartFormData: { multipart in
multipart.append(fileData, withName: "payload", fileName: "someFile.jpg", mimeType: "image/jpeg")
multipart.append("comment".data(using: .utf8)!, withName :"comment")
}, to: "endPointURL", method: .post, headers: nil) { encodingResult in
switch encodingResult {
case .success(let upload, _, _):
upload.response { answer in
print("statusCode: \(answer.response?.statusCode)")
}
upload.uploadProgress { progress in
//call progress callback here if you need it
}
case .failure(let encodingError):
print("multipart upload encodingError: \(encodingError)")
}
}
Also you could take a look at CodyFire lib it makes API calls easier using Codable for everything. Example for Multipart call using CodyFire
//Declare your multipart payload model
struct MyPayload: MultipartPayload {
var attachment: Attachment //or you could use just Data instead
var comment: String
}
// Prepare payload for request
let imageAttachment = Attachment(data: UIImage(named: "cat")!.jpeg(.high)!,
fileName: "cat.jpg",
mimeType: .jpg)
let payload = MyPayload(attachment: imageAttachment, comment: "Some text")
//Send request easily
APIRequest("endpoint", payload: payload)
.method(.post)
.desiredStatus(.created) //201 CREATED
.onError { error in
switch error.code {
case .notFound: print("Not found")
default: print("Another error: " + error.description)
}
}.onSuccess { result in
print("here is your decoded result")
}
//Btw normally it should be wrapped into an extension
//so it should look even easier API.some.upload(payload).onError{}.onSuccess{}
You could take a look at all the examples in lib's readme
There is no real need to create a war to run it from Tomcat. You can follow these steps
Create a folder in webapps folder e.g. MyApp
Put your html and css in that folder and name the html file, which you want to be the starting page for your application, index.html
Start tomcat and point your browser to url "http://localhost:8080/MyApp". Your index.html page will pop up in the browser
Maven does this because your dependency is in a SNAPSHOT version and maven has no way to detect any changes made to that snapshot version in the repository. Release your artifact and change the version in pom.xml to that version and maven will no longer fetch the metadata file.
Try this: sudo systemctl start mongod
and to check whether its running use sudo systemctl status mongod
To find the directory where your executable is, you can use:
TCHAR szFilePath[_MAX_PATH];
::GetModuleFileName(NULL, szFilePath, _MAX_PATH);
During compilation with g++
via make
define LIBRARY_PATH
if it may not be appropriate to change the Makefile with the -L
option. I had put my extra library in /opt/lib
so I did:
$ export LIBRARY_PATH=/opt/lib/
and then ran make
for successful compilation and linking.
To run the program with a shared library define:
$ export LD_LIBRARY_PATH=/opt/lib/
before executing the program.
I have this same requirement - we want to put logs in a specific root directory that should exist within the environment.
public static readonly string DefaultLogFilePath = Environment.GetFolderPath(Environment.SpecialFolder.UserProfile);
If I want to combine this with a sub-directory, I should be able to use Path.Combine( ... )
.
The GetFolderPath
method has an overload for special folder options which allows you to control whether the specified path be created or simply verified.
Use below script
Object[] myNum = {10, 20, 30, 40};
List<Object> newArr = new ArrayList<>(Arrays.asList(myNum));
for just translating one char into another throughout a string, tr
is the best tool:
tr '\\' '/'
If you already define your view in your layout(xml) file, only want to change the weight programmatically, this way is better
LinearLayout.LayoutParams params = (LinearLayout.LayoutParams)
mButton.getLayoutParams();
params.weight = 1.0f;
mButton.setLayoutParams(params);
new a LayoutParams overwrites other params defined in you xml file like margins, or you need to specify all of them in LayoutParams.
With EL 2 (Expression Language 2) you can use this type of construct for your question:
#{formatBean.format(myBean.birthdate)}
Or you can add an alternate getter in your bean resulting in
#{myBean.birthdateString}
where getBirthdateString returns the proper text representation. Remember to annotate the get method as @Transient if it is an Entity.
They are the inverse of each other. JSON.stringify()
serializes a JS object into a JSON string, whereas JSON.parse()
will deserialize a JSON string into a JS object.
I was facing the same issue while executing the command mvn -version; however, I checked I had also set the mvn options in the environment variables setting, which gave me some Heap memory issue on the command prompt. So, I removed the maven options that I had set and then it worked fine for me.
I resolve the issue by restarting Docker.
char numeralChar = '4';
int numeral = (int) (numeralChar - '0');
According to this: http://www.devcha.com/2008/03/svn-directory-svn-containing-working.html
Check-out the folder "blabla" to a different location and then copy its .svn folder back into the original "blabla".
You can use a function with COALESCE.
CREATE FUNCTION [dbo].[GetAliasesById]
(
@userID int
)
RETURNS varchar(max)
AS
BEGIN
declare @output varchar(max)
select @output = COALESCE(@output + ', ', '') + alias
from UserAliases
where userid = @userID
return @output
END
GO
SELECT UserID, dbo.GetAliasesByID(UserID)
FROM UserAliases
GROUP BY UserID
GO
If you're trying to get access to a file, try the openFileOutput()
and openFileInput()
methods as described here. They automatically open input/output streams to the specified file in internal memory. This allows you to bypass the directory and File
objects altogether which is a pretty clean solution.
To install the prerequisites for GPU support in TensorFlow 2.1:
pip install tensorflow
.You can also choose between a dark or light ReCaptcha theme. I used this in one of my Angular 8 Apps
There are several issues:
getElementsByClassName()
.Example (untested):
<script type="text/javascript">
function hideTd(className){
var elements = document.getElementsByClassName(className);
for(var i = 0, length = elements.length; i < length; i++) {
if( elements[i].textContent == ''){
elements[i].style.display = 'none';
}
}
}
</script>
</head>
<body onload="hideTd('td');">
<table border="1">
<tr>
<td class="td">not empty</td>
</tr>
<tr>
<td class="td"></td>
</tr>
<tr>
<td class="td"></td>
</tr>
</table>
</body>
Note that getElementsByClassName()
is not available up to and including IE8.
Update:
Alternatively you can give the table an ID and use:
var elements = document.getElementById('tableID').getElementsByTagName('td');
to get all td
elements.
To hide the parent row, use the parentNode
property of the element:
elements[i].parentNode.style.display = "none";
i'm not sure what you're expecting this
to refer to in your example.. here's an alternative method:
<html>
<head>
<script src="http://code.jquery.com/jquery-1.6.4.min.js" type="text/javascript"></script>
<script type="text/javascript">
$(function () {
$.get("banner.html", function (data) {
$("#appendToThis").append(data);
});
});
</script>
</head>
<body>
<div id="appendToThis"></div>
</body>
</html>
Swift 3.0:
let userInterface = UIDevice.current.userInterfaceIdiom
if(userInterface == .pad){
//iPads
}else if(userInterface == .phone){
//iPhone
}else if(userInterface == .carPlay){
//CarPlay
}else if(userInterface == .tv){
//AppleTV
}
alias nginx.start='sudo nginx -c /etc/nginx/nginx.conf'
alias nginx.stop='sudo nginx -s stop'
alias nginx.reload='sudo nginx -s reload'
alias nginx.config='sudo nginx -t'
alias nginx.restart='nginx.config && nginx.stop && nginx.start'
alias nginx.errors='tail -250f /var/logs/nginx.error.log'
alias nginx.access='tail -250f /var/logs/nginx.access.log'
alias nginx.logs.default.access='tail -250f /var/logs/nginx.default.access.log'
alias nginx.logs.default-ssl.access='tail -250f /var/logs/nginx.default.ssl.log'
and then use commands "nginx.reload" etc..
For me, the problem was that my target profile by accident got set to ".Net Framework 4 Client profile". When I rebuilt the service in question using the ".Net Framework 4", the problem went away!
I too get this error sometimes when I dismiss dialog and finish activity from onPostExecute method. I guess sometimes activity gets finished before dialog successfully dismisses.
Simple, yet effective solution that works for me
@Override
protected void onPostExecute(MyResult result) {
try {
if ((this.mDialog != null) && this.mDialog.isShowing()) {
this.mDialog.dismiss();
}
} catch (final IllegalArgumentException e) {
// Handle or log or ignore
} catch (final Exception e) {
// Handle or log or ignore
} finally {
this.mDialog = null;
}
}
Adam's answer is quite fast, but I found that random.getrandbits(1)
to be quite a lot faster. If you really want a boolean instead of a long then
bool(random.getrandbits(1))
is still about twice as fast as random.choice([True, False])
Both solutions need to import random
If utmost speed isn't to priority then random.choice
definitely reads better
$ python -m timeit -s "import random" "random.choice([True, False])"
1000000 loops, best of 3: 0.904 usec per loop
$ python -m timeit -s "import random" "random.choice((True, False))"
1000000 loops, best of 3: 0.846 usec per loop
$ python -m timeit -s "import random" "random.getrandbits(1)"
1000000 loops, best of 3: 0.286 usec per loop
$ python -m timeit -s "import random" "bool(random.getrandbits(1))"
1000000 loops, best of 3: 0.441 usec per loop
$ python -m timeit -s "import random" "not random.getrandbits(1)"
1000000 loops, best of 3: 0.308 usec per loop
$ python -m timeit -s "from random import getrandbits" "not getrandbits(1)"
1000000 loops, best of 3: 0.262 usec per loop # not takes about 20us of this
Added this one after seeing @Pavel's answer
$ python -m timeit -s "from random import random" "random() < 0.5"
10000000 loops, best of 3: 0.115 usec per loop
You can use this
whereDate('date', '=', $date)
If you give whereDate then compare only date from datetime field.
TortoiseSVN contains a console svn client, but by default the corresponding option is not enabled during installation.
The svn.exe
executable is not standalone and it depends on some other files in the distribution but this should not be a problem in most cases.
Once installed you might need to add the folder containing svn.exe
to the system PATH
as described here so that it is available in your console. To check if it was already added by the installer open a new console and type echo %PATH%
. Use set
on its own to see all environmental variables.
If you are using jQuery then by using plugin formInteract, you just need to do this:
// Just keep the HTML as it is.
<input name="searchTxt" type="text" maxlength="512" id="searchTxt" class="searchField"/>
At bottom of the page just include this plugin file and write this code:
// Initialize one time at the bottom of the page.
var search= $("#searchTxt).formInteract();
search.getAjax("http://www.myurl.com/search/", function(rsp){
// Now do whatever you want to with your response
});
Or if using a parameterized URL then use this:
$.get("http://www.myurl.com/search/"+search.get().searchTxt, {}, function(rsp){
// Now do work with your response;
})
Here is the link to project https://bitbucket.org/ranjeet1985/forminteract
You can use this plugin for many purposes like getting the value of a form, putting values into a form, validation of forms and many more. You can see some example of code in the index.html file of the project.
Of course I am the author of this project and all are welcome to make it better.
To get the absolute path use this:
String path = HttpContext.Current.Server.MapPath("~/Data/data.html");
EDIT:
To get the Controller's Context remove .Current
from the above line. By using HttpContext
by itself it's easier to Test because it's based on the Controller's Context therefore more localized.
I realize now that I dislike how Server.MapPath
works (internally eventually calls HostingEnvironment.MapPath
) So I now recommend to always use HostingEnvironment.MapPath
because its static and not dependent on the context unless of course you want that...
I usually work with expandtab
set, but that's bad for makefiles. I recently added:
:autocmd FileType make set noexpandtab
to the end of my .vimrc file and it recognizes Makefile, makefile, and *.mk as makefiles and does not expand tabs. Presumably, you can extend this.
If we define dx = x2 - x1
and dy = y2 - y1
, then the normals are (-dy, dx)
and (dy, -dx)
.
Note that no division is required, and so you're not risking dividing by zero.
The best thing to do is use lambda as follows:
button = Tk.Button(master=frame, text='press', command=lambda: action(someNumber))
You can try:
node.offsetTop - window.scrollY
It works on Opera with viewport meta tag defined.
i find best solution in https://dzone.com/articles/get-last-record-in-each-mysql-group
select * from `data` where `id` in (select max(`id`) from `data` group by `name_id`)
Yes, I believe it should work and it can also be applied to other data types.
For class arrays though, if there are fewer items in the initializer list than elements in the array, the default constructor is used for the remaining elements. If no default constructor is defined for the class, the initializer list must be complete — that is, there must be one initializer for each element in the array.
A little late reply, but what I found in Notepad++ v7.8.6 is, on RMB (Right Mouse Button), on selection text, it gives an option called "Style token" where it shows "Using 1st/2nd/3rd/4th/5th style" to highlight the selected text in different pre-defined colors
Hope this helps some ppl, I got this error when i added the path and extension to "docref_root" "docref_ext" in my php.ini file, I then commented it out and it was ok, but cant get my help to work now.
Wikipedia does a comparison here.
From Cygwin's website:
- Cygwin is a Linux-like environment for Windows. It consists of two parts: A DLL (cygwin1.dll) which acts as a Linux API emulation layer providing substantial Linux API functionality.
- A collection of tools which provide Linux look and feel.
From Mingw's website:
MinGW ("Minimalistic GNU for Windows") is a collection of freely available and freely distributable Windows specific header files and import libraries combined with GNU toolsets that allow one to produce native Windows programs that do not rely on any 3rd-party C runtime DLLs
You should look at the specialisations of the numeric_limits<> template for a given type. Its in the header.
For an out-of-the-box working example, this is what I ended up using based on the previous answers.
using System.Reflection;
using System.Runtime.InteropServices;
label1.Text = "GUID: " + ((GuidAttribute)Attribute.GetCustomAttribute(Assembly.GetExecutingAssembly(), typeof(GuidAttribute), false)).Value.ToUpper();
Alternatively, this way allows you to use it from a static class:
/// <summary>
/// public GUID property for use in static class </summary>
/// <returns>
/// Returns the application GUID or "" if unable to get it. </returns>
static public string AssemblyGuid
{
get
{
object[] attributes = Assembly.GetEntryAssembly().GetCustomAttributes(typeof(GuidAttribute), false);
if (attributes.Length == 0) { return String.Empty; }
return ((System.Runtime.InteropServices.GuidAttribute)attributes[0]).Value.ToUpper();
}
}
We can achieve thread safety by using both ConcurrentHashMap and synchronisedHashmap. But there is a lot of difference if you look at their architecture.
It will maintain the lock at the object level. So if you want to perform any operation like put/get then you have to acquire the lock first. At the same time, other threads are not allowed to perform any operation. So at a time, only one thread can operate on this. So the waiting time will increase here. We can say that performance is relatively low when you are comparing with ConcurrentHashMap.
It will maintain the lock at the segment level. It has 16 segments and maintains the concurrency level as 16 by default. So at a time, 16 threads can be able to operate on ConcurrentHashMap. Moreover, read operation doesn't require a lock. So any number of threads can perform a get operation on it.
If thread1 wants to perform put operation in segment 2 and thread2 wants to perform put operation on segment 4 then it is allowed here. Means, 16 threads can perform update(put/delete) operation on ConcurrentHashMap at a time.
So that the waiting time will be less here. Hence the performance is relatively better than synchronisedHashmap.
$env:USERPROFILE = "C:\\Documents and Settings\\[USER]\\"
Alternate solution to doing shallow clone (git clone --depth=1 <URL>
) would be, if remote side supports it, to use --remote
option of git archive:
$ git archive --format=tar --remote=<repository URL> HEAD | tar xf -
Or, if remote repository in question is browse-able using some web interface like gitweb or GitHub, then there is a chance that it has 'snapshot' feature, and you can download latest version (without versioning information) from web interface.
You may simply want a UNIQUE CONSTRAINT. Especially if you already have a surrogate key. (example of an already existing surrogate key would be a single column that is an AUTO_INCREMENT )
Below is the sql code for a Unique Constraint
ALTER TABLE `MyDatabase`.`Provider`
ADD CONSTRAINT CK_Per_Place_Thing_Unique UNIQUE (person,place,thing)
;
I believe that join()
is just a convenience method. Try df1.merge(df2)
instead, which allows you to specify left_on
and right_on
:
In [30]: left.merge(right, left_on="key1", right_on="key2")
Out[30]:
key1 lval key2 rval
0 foo 1 foo 4
1 bar 2 bar 5
select convert(char(5), tbl_CustomerBooking.CheckInTime, 108) AS [time]
from tbl_CustomerBooking
@Zordid @Iambda answer is great, but I found that if I put
mHandler.postDelayed(mUpdateUITimerTask, 10 * 1000);
in the run() method and
mHandler.postDelayed(mUpdateUITimerTask, 0);
in the onCreate method make the thing keep updating.
<FORM Action="mailto:xyz?Subject=Test_Post" METHOD="POST">
mailto: protocol test:
<Br>Subject:
<INPUT name="Subject" value="Test Subject">
<Br>Body: 
<TEXTAREA name="Body">
kfdskfdksfkds
</TEXTAREA>
<BR>
<INPUT type="submit" value="Submit">
</FORM>
According to Documentation
git diff Shows changes between the working tree and the index or a tree, changes between the index and a tree, changes between two trees, changes resulting from a merge, changes between two blob objects, or changes between two files on disk.
In git diff
- There's a significant difference between two dots ..
and 3 dots ...
in the way we compare branches or pull requests in our repository. I'll give you an easy example which demonstrates it easily.
Example: Let's assume we're checking out new branch from master and pushing some code in.
G---H---I feature (Branch)
/
A---B---C---D master (Branch)
Two dots - If we want to show the diffs between all changes happened in the current time on both sides, We would use the git diff origin/master..feature
or just git diff origin/master
,output: ( H, I
against A, B, C, D
)
Three dots - If we want to show the diffs between the last common ancestor (A
), aka the check point we started our new branch ,we use git diff origin/master...feature
,output: (H, I
against A
).
I'd rather use the 3 dots in most circumstances.
It's really simple, just download the latest toolkit from Codeplex and add the extracted AjaxControlToolkit.dll
to your toolbox in Visual Studio by right clicking the toolbox and selecting 'choose items'. You will then have the controls in your Visual STudio toolbox and using them is just a matter of dragging and dropping them onto your form, of course don't forget to add a asp:ScriptManager
to every page that uses controls from the toolkit, or optionally include it in your master page only and your content pages will inherit the script manager.
Should be possible using two statements within one transaction, an insert and a delete:
BEGIN TRANSACTION;
INSERT INTO Table2 (<columns>)
SELECT <columns>
FROM Table1
WHERE <condition>;
DELETE FROM Table1
WHERE <condition>;
COMMIT;
This is the simplest form. If you have to worry about new matching records being inserted into table1 between the two statements, you can add an and exists <in table2>
.
Implementation:
// Promisify setTimeout
const pause = (ms, cb, ...args) =>
new Promise((resolve, reject) => {
setTimeout(async () => {
try {
resolve(await cb?.(...args))
} catch (error) {
reject(error)
}
}, ms)
})
Tests:
// Test 1
pause(1000).then(() => console.log('called'))
// Test 2
pause(1000, (a, b, c) => [a, b, c], 1, 2, 3).then(value => console.log(value))
// Test 3
pause(1000, () => {
throw Error('foo')
}).catch(error => console.error(error))
All you have to do is to delete the "0" in the cells that contain just that and try again. That should work.
To see the difference between:
Your working copy and staging area:
% git diff
Staging area and the latest commit:
% git diff --staged
Your working copy and commit 4ac0a6733:
% git diff 4ac0a6733
Commit 4ac0a6733 and the latest commit:
% git diff 4ac0a6733 HEAD
Commit 4ac0a6733 and commit 826793951
% git diff 4ac0a6733 826793951
For more explanation see the official documentation.
I think you should change that like so:
<input value={this.state.value} onChange={(e) => {this.handleChange(e)}}/>
That is in principle the same as onClick={this.handleClick.bind(this)}
as you did on the button.
So if you want to call handleChange()
when the button is clicked, than:
<button onClick={this.handleChange.bind(this)}>Change Input</button>
or
handleClick () {
this.setState({value: 'another random text'});
this.handleChange();
}
Using find
:
find . -maxdepth 1 -type f
Using the -maxdepth 1
option ensures that you only look in the current directory (or, if you replace the .
with some path, that directory). If you want a full recursive listing of all files in that and subdirectories, just remove that option.
if we use same page to add/edit via submit button like below
<input type="hidden" value="<?echo $_GET['edit_id'];?>" name="edit_id">
then we should not use
isset($_POST['edit_id'])
bcoz edit_id
is set all the time whether it is add or edit page , instead we should use check below condition
!empty($_POST['edit_id'])
and doesnt give any clues
Yes it does, unfortunately your code is ignoring all of those clues. Take a look at your exception handler:
catch (OleDbException ex)
{
MessageBox.Show(ex.Source);
conn.Close();
}
All you're examining is the source of the exception. Which, in this case, is "Microsoft Access Database Engine". You're not examining the error message itself, or the stack trace, or any inner exception, or anything useful about the exception.
Don't ignore the exception, it contains information about what went wrong and why.
There are various logging tools out there (NLog, log4net, etc.) which can help you log useful information about an exception. Failing that, you should at least capture the exception message, stack trace, and any inner exception(s). Currently you're ignoring the error, which is why you're not able to solve the error.
In your debugger, place a breakpoint inside the catch
block and examine the details of the exception. You'll find it contains a lot of information.
Try browser.execute_script
instead of selenium.GetEval
.
See this answer for example.
When I just run this as a page
<?php
echo '<script language="javascript">';
echo 'alert("message successfully sent")';
echo '</script>';
exit;
it works fine.
What version of PHP are you running?
Could you try echoing something else after: $testObject->split_for_sms($Chat);
Maybe it doesn't get to that part of the code? You could also try these with the other function calls to check where your program stops/is getting to.
Hope you get a bit further with this.
You can also zoom by using MKCoordinateRegion and setting its span latitude & longitude delta. Below is a quick reference and here is the iOS reference. It won't do anything fancy but should allow you to set zoom when it draws the map.
MKCoordinateRegion region;
region.center.latitude = {desired lat};
region.center.longitude = {desired lng};
region.span.latitudeDelta = 1;
region.span.longitudeDelta = 1;
mapView.region = region;
Edit 1:
MKCoordinateRegion region;
region.center.latitude = {desired lat};
region.center.longitude = {desired lng};
region.span.latitudeDelta = 1;
region.span.longitudeDelta = 1;
region = [mapView regionThatFits:region];
[mapView setRegion:region animated:TRUE];
This worked for me and also localised it:
$.datepicker.setDefaults( $.datepicker.regional[ "fr" ] );
$(function() {
$( "#txtDespatchDate" ).datepicker( );
$( "#txtDespatchDate" ).datepicker( "option", "dateFormat", "dd/mm/yy" );
$('#txtDespatchDate').datepicker('setDate', new Date());
});
VSCode comes with in-built color themes which can be used to change the colors of the editor and the terminal.
ctrl+k+t
in windows/ubuntu or cmd+k+t
on mac.ctrl+shift+p
in windows/ubuntu or cmd+shift+p
on mac and type color
. Select preferences: color theme
from the options, to select your favourite color.category:themes
to install your favourite themes. (If you need to sort the themes by installs search category:themes @sort:installs
)Edit - for manually editing colors in terminal
VSCode team have removed customizing colors from user settings page. Currently using the themes is the only way to customize terminal colors in VSCode. For more information check out issue #6766
Overloading a function in JavaScript can be done in many ways. All of them involve a single master function that either performs all the processes, or delegates to sub-functions/processes.
One of the most common simple techniques involves a simple switch:
function foo(a, b) {
switch (arguments.length) {
case 0:
//do basic code
break;
case 1:
//do code with `a`
break;
case 2:
default:
//do code with `a` & `b`
break;
}
}
A more elegant technique would be to use an array (or object if you're not making overloads for every argument count):
fooArr = [
function () {
},
function (a) {
},
function (a,b) {
}
];
function foo(a, b) {
return fooArr[arguments.length](a, b);
}
That previous example isn't very elegant, anyone could modify fooArr
, and it would fail if someone passes in more than 2 arguments to foo
, so a better form would be to use a module pattern and a few checks:
var foo = (function () {
var fns;
fns = [
function () {
},
function (a) {
},
function (a, b) {
}
];
function foo(a, b) {
var fnIndex;
fnIndex = arguments.length;
if (fnIndex > foo.length) {
fnIndex = foo.length;
}
return fns[fnIndex].call(this, a, b);
}
return foo;
}());
Of course your overloads might want to use a dynamic number of parameters, so you could use an object for the fns
collection.
var foo = (function () {
var fns;
fns = {};
fns[0] = function () {
};
fns[1] = function (a) {
};
fns[2] = function (a, b) {
};
fns.params = function (a, b /*, params */) {
};
function foo(a, b) {
var fnIndex;
fnIndex = arguments.length;
if (fnIndex > foo.length) {
fnIndex = 'params';
}
return fns[fnIndex].apply(this, Array.prototype.slice.call(arguments));
}
return foo;
}());
My personal preference tends to be the switch
, although it does bulk up the master function. A common example of where I'd use this technique would be a accessor/mutator method:
function Foo() {} //constructor
Foo.prototype = {
bar: function (val) {
switch (arguments.length) {
case 0:
return this._bar;
case 1:
this._bar = val;
return this;
}
}
}
As Mike Nakis said, echo off
only prevents the printing of commands, not results. To hide the result of a command add >nul
to the end of the line, and to hide errors add 2>nul
. For example:
Del /Q *.tmp >nul 2>nul
Like Krister Andersson said, the reason you get an error is your variable is expanding with spaces:
set INSTALL_PATH=C:\My App\Installer
if exist %INSTALL_PATH% (
Becomes:
if exist C:\My App\Installer (
Which means:
If "C:\My" exists, run "App\Installer" with "(" as the command line argument.
You see the error because you have no folder named "App". Put quotes around the path to prevent this splitting.
This is taken from the book - The Complete Reference by Ed Burns & Chris Schalk
h:commandButton vs h:button
What’s the difference between h:commandButton|h:commandLink and h:button|h:link ?
The latter two components were introduced in 2.0
to enable bookmarkable
JSF pages, when used in concert with the View Parameters feature.
There are 3 main differences between h:button|h:link and h:commandButton|h:commandLink.
First,
h:button|h:link
causes the browser to issue an HTTP GET request, whileh:commandButton|h:commandLink
does a form POST. This means that any components in the page that have values entered by the user, such as text fields, checkboxes, etc., will not automatically be submitted to the server when usingh:button|h:link
. To cause values to be submitted withh:button|h:link
, extra action has to be taken, using the “View Parameters” feature.The second main difference between the two kinds of components is that
h:button|h:link
has an outcome attribute to describe where to go next whileh:commandButton|h:commandLink
uses an action attribute for this purpose. This is because the former does not result in an ActionEvent in the event system, while the latter does.Finally, and most important to the complete understanding of this feature, the
h:button|h:link
components cause the navigation system to be asked to derive the outcome during the rendering of the page, and the answer to this question is encoded in the markup of the page. In contrast, theh:commandButton|h:commandLink
components cause the navigation system to be asked to derive the outcome on the POSTBACK from the page. This is a difference in timing. Rendering always happens before POSTBACK.
You just need to use these commands
sudo rm -rf /Library/Java/*
sudo rm -rf /Library/PreferencePanes/Java*
sudo rm -rf /Library/Internet\ Plug-Ins/Java*
The error message means that any method that calls showfile()
must either declare that it, in turn, throws IOException
, or the call must be inside a try
block that catches IOException
. When you call showfile()
, you do neither of these; for example, your filecontent
constructor neither declares IOException
nor contains a try
block.
The intent is that some method, somewhere, should contain a try
block, and catch and handle this exception. The compiler is trying to force you to handle the exception somewhere.
By the way, this code is (sorry to be so blunt) horrible. You don't close any of the files you open, the BufferedReader
always points to the first file, even though you seem to be trying to make it point to another, the loops contain off-by-one errors that will cause various exceptions, etc. When you do get this to compile, it will not work as you expect. I think you need to slow down a little.
Use:
$('#example').dataTable({
aLengthMenu: [
[25, 50, 100, 200, -1],
[25, 50, 100, 200, "All"]
],
iDisplayLength: -1
});
Or if using 1.10+
$('#example').dataTable({
paging: false
});
The option you should use is iDisplayLength:
$('#adminProducts').dataTable({
'iDisplayLength': 100
});
$('#table').DataTable({
"lengthMenu": [ [5, 10, 25, 50, -1], [5, 10, 25, 50, "All"] ]
});
It will Load by default all entries.
$('#example').dataTable({
aLengthMenu: [
[25, 50, 100, 200, -1],
[25, 50, 100, 200, "All"]
],
iDisplayLength: -1
});
Or if using 1.10+
$('#example').dataTable({
paging: false
});
If you want to load by default 25 not all do this.
$('#example').dataTable({
aLengthMenu: [
[25, 50, 100, 200, -1],
[25, 50, 100, 200, "All"]
],
});
All of these answers miss an important distinction. update() is used to (re)attach your object graph to a Session. The objects you pass it are the ones that are made managed.
merge() is actually not a (re)attachment API. Notice merge() has a return value? That's because it returns you the managed graph, which may not be the graph you passed it. merge() is a JPA API and its behavior is governed by the JPA spec. If the object you pass in to merge() is already managed (already associated with the Session) then that's the graph Hibernate works with; the object passed in is the same object returned from merge(). If, however, the object you pass into merge() is detached, Hibernate creates a new object graph that is managed and it copies the state from your detached graph onto the new managed graph. Again, this is all dictated and governed by the JPA spec.
In terms of a generic strategy for "make sure this entity is managed, or make it managed", it kind of depends on if you want to account for not-yet-inserted data as well. Assuming you do, use something like
if ( session.contains( myEntity ) ) {
// nothing to do... myEntity is already associated with the session
}
else {
session.saveOrUpdate( myEntity );
}
Notice I used saveOrUpdate() rather than update(). If you do not want not-yet-inserted data handled here, use update() instead...
d = dict.fromkeys(a, 0)
a
is the list, 0
is the default value. Pay attention not to set the default value to some mutable object (i.e. list or dict), because it will be one object used as value for every key in the dictionary (check here for a solution for this case). Numbers/strings are safe.
This is how you add jar files from external folders
1) Click on File and there you click on New and New Module
2) New Window appears ,,There you have to choose the Import .JAR/.AAR package .
3) Click on the path option at the top right corner of the window ...And give the whole path of the JAR file .
4)click on finish.
Now you have added the Jar file and You need to add it in the dependency for your application project
1)Right click on app folder and there you have to choose Open Module Settings or F4
2)Click on dependency at the top right corner of the current window .
3)Click on '+' symbol and choose 'Module Dependency' and It will show you the existed JAR files which you have included in your project ...
Choose the one you want and click 'OK/Finish'
Thank you
NSMutableParagraphStyle *paragraphStyle = NSMutableParagraphStyle.new;
paragraphStyle.alignment = NSTextAlignmentCenter;
NSAttributedString *attributedString =
[NSAttributedString.alloc initWithString:@"someText"
attributes:
@{NSParagraphStyleAttributeName:paragraphStyle}];
Swift 4.2
let paragraphStyle: NSMutableParagraphStyle = NSMutableParagraphStyle()
paragraphStyle.alignment = NSTextAlignment.center
let attributedString = NSAttributedString(string: "someText", attributes: [NSAttributedString.Key.paragraphStyle : paragraphStyle])
Are you after something like this:
<html>
<head>
<title>Z Test</title>
</head>
<body>
<div id="img_home"></div>
<button onclick="addimage()" type="button">Add an image</button>
<script>
function addimage() {
var img = new Image();
img.src = "https://www.google.com/images/srpr/logo4w.png"
img_home.appendChild(img);
}
</script>
</body>
Thanks for spotting this I was about to add strings thinking the same as you that they'd get added to end of collection. It appears the params are:
msg.to.Add(<MailAddress>) adds MailAddress to the end of the collection
msg.to.Add(<string>) add a list of emails to the collection
Slightly different actions depending on param type, I think this is pretty bad form i'd have prefered split methods AddStringList of something.
Through the Computer management console, navigate through Event Viewer > Windows Logs > System. Every services that change state will be logged here.
You'll see info like: The XXXX service entered the running state or The XXXX service entered the stopped state, etc.
After making changes to .profile, you need to execute the file, in order for the changes to take effect.
root@masternode# . ~/.profile
Once this is done, the echo command will work.
Maybe std::ostream_iterator
and std::ostringstream
:
#include <vector>
#include <string>
#include <algorithm>
#include <sstream>
#include <iterator>
#include <iostream>
int main()
{
std::vector<int> vec;
vec.push_back(1);
vec.push_back(4);
vec.push_back(7);
vec.push_back(4);
vec.push_back(9);
vec.push_back(7);
std::ostringstream oss;
if (!vec.empty())
{
// Convert all but the last element to avoid a trailing ","
std::copy(vec.begin(), vec.end()-1,
std::ostream_iterator<int>(oss, ","));
// Now add the last element with no delimiter
oss << vec.back();
}
std::cout << oss.str() << std::endl;
}
//get main activity
final Activity main_activity=getActivity();
//list view click listener
final ListView listView = (ListView) inflatedView.findViewById(R.id.listView_id);
listView.setOnItemClickListener(new AdapterView.OnItemClickListener() {
@Override
public void onItemClick(AdapterView<?> parent, View view, int position, long id) {
String stringText;
//in normal case
stringText= ((TextView)view).getText().toString();
//in case if listview has separate item layout
TextView textview=(TextView)view.findViewById(R.id.textview_id_of_listview_Item);
stringText=textview.getText().toString();
//show selected
Toast.makeText(main_activity, stringText, Toast.LENGTH_LONG).show();
}
});
//populate listview
i think you can use more than one class in a tag
for example:
<div class="whatever base"></div>
<div class="whatever2 base"></div>
so when you want to chage all div's color you can just change the .base
...i dont know how to inherit in CSS
Have you tried with the custom format "#,##0.##"
?
If you're using JQuery you can do:
$('#elementid').click();
Yow can use querySelectorAll to select all the classes and loop through them to assign the eventListener. The if condition checks if it contains the class name.
const arrClass = document.querySelectorAll(".className");
for (let i of arrClass) {
i.addEventListener("click", (e) => {
if (e.target.classList.contains("className")) {
console.log("Perfrom Action")
}
})
}
Off the top of my head:
GetType()
instead of typeof(Page)
in order to bind the script to your actual page class instead of the base class,Page.UniqueID
, which is not that meaningful since it's supposed to be used by named controls,PreRender
phase:protected void Page_PreRender(object sender, EventArgs e)
{
ScriptManager.RegisterStartupScript(this, GetType(), "YourUniqueScriptKey",
"alert('This pops up');", true);
}
I had two incompatible dependencies.
The below dependencies caused the error.
compile 'com.google.android.gms:play-services-fitness:8.3.0'
compile 'com.google.android.gms:play-services-wearable:8.4.0'
By changing the fitness dependency to version 8.4.0 I was able to run the app.
compile 'com.google.android.gms:play-services-fitness:8.4.0'
compile 'com.google.android.gms:play-services-wearable:8.4.0'
SYS_GUID
returns a GUID-- a globally unique ID. A SYS_GUID
is a RAW(16)
. It does not generate an incrementing numeric value.
If you want to create an incrementing numeric key, you'll want to create a sequence.
CREATE SEQUENCE name_of_sequence
START WITH 1
INCREMENT BY 1
CACHE 100;
You would then either use that sequence in your INSERT
statement
INSERT INTO name_of_table( primary_key_column, <<other columns>> )
VALUES( name_of_sequence.nextval, <<other values>> );
Or you can define a trigger that automatically populates the primary key value using the sequence
CREATE OR REPLACE TRIGGER trigger_name
BEFORE INSERT ON table_name
FOR EACH ROW
BEGIN
SELECT name_of_sequence.nextval
INTO :new.primary_key_column
FROM dual;
END;
If you are using Oracle 11.1 or later, you can simplify the trigger a bit
CREATE OR REPLACE TRIGGER trigger_name
BEFORE INSERT ON table_name
FOR EACH ROW
BEGIN
:new.primary_key_column := name_of_sequence.nextval;
END;
If you really want to use SYS_GUID
CREATE TABLE table_name (
primary_key_column raw(16) default sys_guid() primary key,
<<other columns>>
)
I stumbled upon this post recently and think that it needs an updated solution for the standard library's c++11 mutex (namely std::mutex).
I've pasted some code below (my first steps with a mutex - I learned concurrency on win32 with HANDLE, SetEvent, WaitForMultipleObjects etc).
Since it's my first attempt with std::mutex and friends, I'd love to see comments, suggestions and improvements!
#include <condition_variable>
#include <mutex>
#include <algorithm>
#include <thread>
#include <queue>
#include <chrono>
#include <iostream>
int _tmain(int argc, _TCHAR* argv[])
{
// these vars are shared among the following threads
std::queue<unsigned int> nNumbers;
std::mutex mtxQueue;
std::condition_variable cvQueue;
bool m_bQueueLocked = false;
std::mutex mtxQuit;
std::condition_variable cvQuit;
bool m_bQuit = false;
std::thread thrQuit(
[&]()
{
using namespace std;
this_thread::sleep_for(chrono::seconds(5));
// set event by setting the bool variable to true
// then notifying via the condition variable
m_bQuit = true;
cvQuit.notify_all();
}
);
std::thread thrProducer(
[&]()
{
using namespace std;
int nNum = 13;
unique_lock<mutex> lock( mtxQuit );
while ( ! m_bQuit )
{
while( cvQuit.wait_for( lock, chrono::milliseconds(75) ) == cv_status::timeout )
{
nNum = nNum + 13 / 2;
unique_lock<mutex> qLock(mtxQueue);
cout << "Produced: " << nNum << "\n";
nNumbers.push( nNum );
}
}
}
);
std::thread thrConsumer(
[&]()
{
using namespace std;
unique_lock<mutex> lock(mtxQuit);
while( cvQuit.wait_for(lock, chrono::milliseconds(150)) == cv_status::timeout )
{
unique_lock<mutex> qLock(mtxQueue);
if( nNumbers.size() > 0 )
{
cout << "Consumed: " << nNumbers.front() << "\n";
nNumbers.pop();
}
}
}
);
thrQuit.join();
thrProducer.join();
thrConsumer.join();
return 0;
}
In all modern browsers you can use
numberStr.padStart(2, "0");
https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/String/padStart
function zeroPad(numberStr) {_x000D_
return numberStr.padStart(2, "0");_x000D_
}_x000D_
_x000D_
var numbers = [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10];_x000D_
_x000D_
numbers.forEach(_x000D_
function(num) {_x000D_
var numString = num.toString();_x000D_
_x000D_
var paddedNum = zeroPad(numString);_x000D_
_x000D_
console.log(paddedNum);_x000D_
}_x000D_
);
_x000D_
A modified port of Mono is also entirely possible.
Without any plugins:
You just need to enable highlight: (Idea v.2016, 2017 and 2018, previous versions may have same or similar settings)
File -> Settings -> Editor -> Inspections -> Java -> Serialization issues -> Serializable class without 'serialVersionUID' - set flag and click 'OK'. (For Macs, Settings is under IntelliJ IDEA -> Preferences...)
Now, if your class implements Serializable
, you will see highlight and alt+Enter on class name will ask you to generate private static final long serialVersionUID
.
UPD: a faster way to find this setting - you might use hotkey Ctrl+Shift+A
(find action), type Serializable class without 'serialVersionUID'
- the first is the one.
$(document).ready(function(){
$('img').each(function(){
var maxWidth = 660;
var ratio = 0;
var img = $(this);
if(img.width() > maxWidth){
ratio = img.height() / img.width();
img.attr('width', maxWidth);
img.attr('height', (maxWidth*ratio));
}
});
});
that will do the magic trick for everyone using latest jquery. Be sure you set your selector right (I used $('img') but that can be different in your case). This only works for landscape mode. But if you look at it, only a few things have to be done to set it to portrait, aka, if img.height() > maxHeight) stuff
Your web app has servlet container specific libraries like servlet-api.jar
file in its /WEB-INF/lib
. This is not right. Remove them all. The /WEB-INF/lib
should contain only the libraries specific to the Web app, not to the servlet container. The servlet container (like Tomcat) is the one who should already provide the servlet container specific libraries. If you supply libraries from an arbitrary servlet container of a different make/version, you'll run into this kind of problems, as your web app wouldn't be able to run on a servlet container of a different make/version than those libraries originated from.
This is a pretty common starter's mistake when they encounter compile-time errors, as they haven't set up their IDE project right. See also How do I import the javax.servlet API in my Eclipse project?
=
is a padding character. If the input stream has length that is not a multiple of 3, the padding character will be added. This is required by decoder: if no padding present, the last byte would have an incorrect number of zero bits.
Better and deeper explanation here: https://base64tool.com/detect-whether-provided-string-is-base64-or-not/
Since you specifically ask for software solutions, and you are using C++, why not use operator overloading to make your own, safe datatypes? For example:
Instead of using uint32_t
(and double
, int64_t
etc), make your own SAFE_uint32_t
which contains a multiple (minimum of 3) of uint32_t. Overload all of the operations you want (* + - / << >> = == != etc) to perform, and make the overloaded operations perform independently on each internal value, ie don't do it once and copy the result. Both before and after, check that all of the internal values match. If values don't match, you can update the wrong one to the value with the most common one. If there is no most-common value, you can safely notify that there is an error.
This way it doesn't matter if corruption occurs in the ALU, registers, RAM, or on a bus, you will still have multiple attempts and a very good chance of catching errors. Note however though that this only works for the variables you can replace - your stack pointer for example will still be susceptible.
A side story: I ran into a similar issue, also on an old ARM chip. It turned out to be a toolchain which used an old version of GCC that, together with the specific chip we used, triggered a bug in certain edge cases that would (sometimes) corrupt values being passed into functions. Make sure your device doesn't have any problems before blaming it on radio-activity, and yes, sometimes it is a compiler bug =)
With bootstrap3-typeahead, I made it to work with the following code:
<input id="typeahead-input" type="text" data-provide="typeahead" />
<script type="text/javascript">
jQuery(document).ready(function() {
$('#typeahead-input').typeahead({
source: function (query, process) {
return $.get('search?q=' + query, function (data) {
return process(data.search_results);
});
}
});
})
</script>
The backend provides search service under the search
GET endpoint, receiving the query in the q
parameter, and returns a JSON in the format { 'search_results': ['resultA', 'resultB', ... ] }
. The elements of the search_results
array are displayed in the typeahead input.
You should do:
try:
value_index = my_list.index(value)
except:
value_index = -1;
If you are also using jQuery ui, in particular datepicker, you can use $.datepicker.parseDate(format, string)
to turn your date strings into a JavaScript Date
object, which you can then compare using the standard <
and >
You can use twiny to create 2 x-axis scales. For Example:
import numpy as np
import matplotlib.pyplot as plt
fig = plt.figure()
ax1 = fig.add_subplot(111)
ax2 = ax1.twiny()
a = np.cos(2*np.pi*np.linspace(0, 1, 60.))
ax1.plot(range(60), a)
ax2.plot(range(100), np.ones(100)) # Create a dummy plot
ax2.cla()
plt.show()
Ref: http://matplotlib.sourceforge.net/faq/howto_faq.html#multiple-y-axis-scales
Output:
Given this example url:
http://www.example.com/some-dir/yourpage.php?q=bogus&n=10
$_SERVER['REQUEST_URI']
will give you:
/some-dir/yourpage.php?q=bogus&n=10
Whereas $_GET['q']
will give you:
bogus
In other words, $_SERVER['REQUEST_URI']
will hold the full request path including the querystring. And $_GET['q']
will give you the value of parameter q
in the querystring.