You can use Async - Await:

async function axiosTest() {
  const response = await axios.get(url);
  const data = await response.json();  
}

Using only base, I wrote the following function.

Note:

1. Assumes Mon is day number 1 in the week
2. First week is week 1
3. Returns 0 if week is 52 from last year

Fine-tune to suit your needs.

findWeekNo <- function(myDate){
  # Find out the start day of week 1; that is the date of first Mon in the year
  weekday <- switch(weekdays(as.Date(paste(format(as.Date(myDate),"%Y"),"01-01", sep = "-"))),
                    "Monday"={1},
                    "Tuesday"={2},
                    "Wednesday"={3},
                    "Thursday"={4},
                    "Friday"={5},
                    "Saturday"={6},
                    "Sunday"={7}
  )

  firstMon <- ifelse(weekday==1,1, 9 - weekday )

  weekNo <- floor((as.POSIXlt(myDate)$yday - (firstMon-1))/7)+1
  return(weekNo)
}


findWeekNo("2017-01-15") # 2

Do a quick 'record macro' to see the color number associated with the color you're looking for (yellow highlight is 65535). Then erase the code and put

Sub Name()
Selection.Interior.Color = 65535 '(your number may be different depending on the above)
End Sub

When pip tells you that you already have protobuf, but PyCharm (or other) tells you that you don't have it, it means that pip and PyCharm are using a different Python interpreter. This is a very common issue, especially on a Mac, with no standard Python package management.

The best way to completely eliminate such issues is using a virtualenv per Python project, which is essentially a directory of Python packages and environment variable settings to isolate the Python environment of the project from everything else.

Create a virtualenv for your project like this:

cd project
virtualenv --distribute virtualenv -p /path/to/python/executable

This creates a directory called virtualenv inside your project. (Make sure to configure your VCS (for example Git) to ignore this directory.)

To install packages in this virtualenv, you need to activate the environment variable settings:

. virtualenv/bin/activate

Verify that pip will use the right Python executable inside the virtualenv, by running pip -V. It should tell you the Python library path used, which should be inside the virtualenv.

Now you can use pip to install protobuf as you did.

And finally, you need to make PyCharm use this virtualenv instead of the system libraries. Somewhere in the project settings you can configure an interpreter for the project, select the Python executable inside the virtualenv.

You can also use the openxlsx library to export multiple datasets to multiple sheets in a single workbook.The advantage of openxlsx over xlsx is that openxlsx removes the dependencies on java libraries.

Write a list of data.frames to individual worksheets using list names as worksheet names.

require(openxlsx)
list_of_datasets <- list("Name of DataSheet1" = dataframe1, "Name of Datasheet2" = dataframe2)
write.xlsx(list_of_datasets, file = "writeXLSX2.xlsx")

Try this :

   for match in re.finditer(r"\[P[^\]]*\](.*?)\[/P\]", subject):
        # match start: match.start()
        # match end (exclusive): match.end()
        # matched text: match.group()

You have in your module

import {Routes, RouterModule} from '@angular/router';

you have to export the module RouteModule

example:

@NgModule({
  imports: [RouterModule.forChild(routes)],
  exports: [RouterModule]
})

to be able to access the functionalities for all who import this module.

If you are using version 0.14.0 or higher of the gradle plugin, you should replace "runProguard" with "minifyEnabled" in your build.gradle files.

runProguard was renamed to minifyEnabled in version 0.14.0. For more info, See Android Build System

As a complement to other answers note that you can also put the lang attribute on various HTML tags inside a page. For example to give a hint to the spellchecker that the input text should be in english:

<input ... spellcheck="true" lang="en"> ...

See: https://developer.mozilla.org/en-US/docs/Web/HTML/Global_attributes/lang

Another syntax of doing the same thing is:

rails g migration AddUserToUpload user:belongs_to

Run this and it worked for me

adb reverse tcp:8081 tcp:8081

I have this issue from time-to-time and often it's because the project wasn't marked as a java project. You can change this by going to the properties for the project > Project Facets > and selecting java. You may then need to properly configure that project, but this is probably part of the problem

By default, it's not in your PATH. You need to use the "Visual Studio 2005 Command Prompt". Alternatively, you can run the vsvars32 batch file, which will set up your environment correctly.

Conveniently, the path to this is stored in the VS80COMNTOOLS environment variable.

The most basic way to iterate over a hash is as follows:

hash.each do |key, value|
  puts key
  puts value
end

cur_ques_details is already a JS object, you don't need to parse it

Below a full code using for loading JS and/or CSS

function loadScript(directory, files){
  var head = document.getElementsByTagName("head")[0]
  var done = false
  var extension = '.js'
  for (var file of files){ 
    var path = directory + file + extension 
    var script = document.createElement("script")
    script.src = path        
    script.type = "text/javascript"
    script.onload = script.onreadystatechange = function() {
        if ( !done && (!this.readyState ||
            this.readyState == "loaded" || this.readyState == "complete") ) {
            done = true
            script.onload = script.onreadystatechange = null   // cleans up a little memory:
            head.removeChild(script)  // to avoid douple loading
        }
  };
  head.appendChild(script) 
  done = false
 }
}

function loadStyle(directory, files){
  var head = document.getElementsByTagName("head")[0]
  var extension = '.css'
  for (var file of files){ 
   var path = directory + file + extension 
   var link = document.createElement("link")
   link.href = path        
   link.type = "text/css"
   link.rel = "stylesheet" 
   head.appendChild(link) 
 }
}

(() => loadScript('libraries/', ['listen','functions', 'speak', 'commands', 'wsBrowser', 'main'])) ();
(() => loadScript('scripts/', ['index'])) ();

(() => loadStyle('styles/', ['index'])) ();

in Swift 4.2 it is a property now.

override var prefersStatusBarHidden: Bool {
    return true
}

One way is to track where each index goes to by sorting the identity [0,1,2,..n]

This works for any number of lists.

Then move each item to its position. Using splices is best.

list1 = [3,2,4,1, 1]
list2 = ['three', 'two', 'four', 'one', 'one2']

index = list(range(len(list1)))
print(index)
'[0, 1, 2, 3, 4]'

index.sort(key = list1.__getitem__)
print(index)
'[3, 4, 1, 0, 2]'

list1[:] = [list1[i] for i in index]
list2[:] = [list2[i] for i in index]

print(list1)
print(list2)
'[1, 1, 2, 3, 4]'
"['one', 'one2', 'two', 'three', 'four']"

Note we could have iterated the lists without even sorting them:

list1_iter = (list1[i] for i in index)

You can set the value of the element to blank

document.getElementById('elementId').value='';

I tried a bunch of the answers here, even the "best" answer. They all came up short of what I specifically was after. So besides the past 12 hours of sitting in regex code for multiple programs and reading and testing these answers this is what I came up with which works EXACTLY like I want.

 find . -type f -name "*.*" | grep -o -E "\.[^\.]+$" | grep -o -E "[[:alpha:]]{2,16}" | awk '{print tolower($0)}' | sort -u

• Finds all files which may have an extension.
• Greps only the extension
• Greps for file extensions between 2 and 16 characters (just adjust the numbers if they don't fit your need). This helps avoid cache files and system files (system file bit is to search jail).
• Awk to print the extensions in lower case.
• Sort and bring in only unique values. Originally I had attempted to try the awk answer but it would double print items that varied in case sensitivity.

If you need a count of the file extensions then use the below code

find . -type f -name "*.*" | grep -o -E "\.[^\.]+$" | grep -o -E "[[:alpha:]]{2,16}" | awk '{print tolower($0)}' | sort | uniq -c | sort -rn

While these methods will take some time to complete and probably aren't the best ways to go about the problem, they work.

Update: Per @alpha_989 long file extensions will cause an issue. That's due to the original regex "[[:alpha:]]{3,6}". I have updated the answer to include the regex "[[:alpha:]]{2,16}". However anyone using this code should be aware that those numbers are the min and max of how long the extension is allowed for the final output. Anything outside that range will be split into multiple lines in the output.

Note: Original post did read "- Greps for file extensions between 3 and 6 characters (just adjust the numbers if they don't fit your need). This helps avoid cache files and system files (system file bit is to search jail)."

Idea: Could be used to find file extensions over a specific length via:

 find . -type f -name "*.*" | grep -o -E "\.[^\.]+$" | grep -o -E "[[:alpha:]]{4,}" | awk '{print tolower($0)}' | sort -u

Where 4 is the file extensions length to include and then find also any extensions beyond that length.

In my case, /storage/emulated/0/ corresponds to my device's root path. For example, when i take a photo with my phone's default camera application, the images are saved automatically /store/emulated/0/DCIM/Camera/mypicname.jpeg

For example, suppose that you want to store your pictures in /Pictures directory, namely in Pictures directory which exist in root directory. So you use the below code.

File storageDir = Environment.getExternalStoragePublicDirectory( Environment.DIRECTORY_PICTURES );

If you want to save the images in DCIM or Downloads directory, give the below arguments to the Environment.getExternalStoragePublicDirectory() method shown above.

Environment.DIRECTORY_DCIM
Environment.DIRECTORY_Downloads

Then specify your image name :

String imageFileName = "JPEG_" + timeStamp + "_";

Then create the file object as shown below. You specify the suffix as the 2nd argument.

File image = File.createTempFile(
            imageFileName,  // prefix
            ".jpg",         // suffix
            storageDir      // directory
);

As Ben said, you'll need to work with the UIView's layer, using a CATransform3D to perform the layer's rotation. The trick to get perspective working, as described here, is to directly access one of the matrix cells of the CATransform3D (m34). Matrix math has never been my thing, so I can't explain exactly why this works, but it does. You'll need to set this value to a negative fraction for your initial transform, then apply your layer rotation transforms to that. You should also be able to do the following:

Objective-C

UIView *myView = [[self subviews] objectAtIndex:0];
CALayer *layer = myView.layer;
CATransform3D rotationAndPerspectiveTransform = CATransform3DIdentity;
rotationAndPerspectiveTransform.m34 = 1.0 / -500;
rotationAndPerspectiveTransform = CATransform3DRotate(rotationAndPerspectiveTransform, 45.0f * M_PI / 180.0f, 0.0f, 1.0f, 0.0f);
layer.transform = rotationAndPerspectiveTransform;

Swift 5.0

if let myView = self.subviews.first {
    let layer = myView.layer
    var rotationAndPerspectiveTransform = CATransform3DIdentity
    rotationAndPerspectiveTransform.m34 = 1.0 / -500
    rotationAndPerspectiveTransform = CATransform3DRotate(rotationAndPerspectiveTransform, 45.0 * .pi / 180.0, 0.0, 1.0, 0.0)
    layer.transform = rotationAndPerspectiveTransform
}

which rebuilds the layer transform from scratch for each rotation.

A full example of this (with code) can be found here, where I've implemented touch-based rotation and scaling on a couple of CALayers, based on an example by Bill Dudney. The newest version of the program, at the very bottom of the page, implements this kind of perspective operation. The code should be reasonably simple to read.

The sublayerTransform you refer to in your response is a transform that is applied to the sublayers of your UIView's CALayer. If you don't have any sublayers, don't worry about it. I use the sublayerTransform in my example simply because there are two CALayers contained within the one layer that I'm rotating.

I don't think min/max validations attribute exist. I would use something like

[Range(1, Int32.MaxValue)]

for minimum value 1 and

[Range(Int32.MinValue, 10)]

for maximum value 10

I wanted to send email using SMTPLIB, its easier and it does not require local setup. After other answers were not directly helpful, This is what i did.

Open Outlook in a browser; Go to the top right corner, click the gear icon for Settings, Choose 'Options' from the appearing drop-down list. Go to 'Accounts', click 'Pop and Imap', You will see the option: "Let devices and apps use pop",

Choose Yes option and Save changes.

Here is the code there after; Edit where neccesary. Most Important thing is to enable POP and the server code herein;

import smtplib

body = 'Subject: Subject Here .\nDear ContactName, \n\n' + 'Email\'s BODY text' + '\nYour :: Signature/Innitials'
try:
    smtpObj = smtplib.SMTP('smtp-mail.outlook.com', 587)
except Exception as e:
    print(e)
    smtpObj = smtplib.SMTP_SSL('smtp-mail.outlook.com', 465)
#type(smtpObj) 
smtpObj.ehlo()
smtpObj.starttls()
smtpObj.login('[email protected]', "password") 
smtpObj.sendmail('[email protected]', '[email protected]', body) # Or recipient@outlook

smtpObj.quit()
pass

You can use flexbox for this.

ul {
    display: flex;
    align-items: center;
}

A detailed explanation of how to use flexbox can be found here.

For the question

How can i run a jar file in command prompt but with arguments

.

To pass arguments to the jar file at the time of execution

java -jar myjar.jar arg1 arg2

In the main() method of "Main-Class" [mentioned in the manifest.mft file]of your JAR file. you can retrieve them like this:

String arg1 = args[0];
String arg2 = args[1];

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">

<html>
<head>
    <title>Untitled</title>

<script type="text/javascript"><!--

function getVal(e) {
    var targ;
    if (!e) var e = window.event;
    if (e.target) targ = e.target;
    else if (e.srcElement) targ = e.srcElement;
    if (targ.nodeType == 3) // defeat Safari bug
        targ = targ.parentNode;

    alert(targ.innerHTML);
}

onload = function() {
    var t = document.getElementById("main").getElementsByTagName("td");
    for ( var i = 0; i < t.length; i++ )
        t[i].onclick = getVal;
}

</script>



<body>

<table id="main"><tr>
    <td>1</td>
    <td>2</td>
    <td>3</td>
    <td>4</td>
</tr><tr>
    <td>5</td>
    <td>6</td>
    <td>7</td>
    <td>8</td>
</tr><tr>
    <td>9</td>
    <td>10</td>
    <td>11</td>
    <td>12</td>
</tr></table>

</body>
</html>

function count(){
    var c= 0;
    for(var p in this) if(this.hasOwnProperty(p))++c;
    return c;
}

var O={a: 1, b: 2, c: 3};

count.call(O);

What you need to do

To allow receiving & sending cookies by a CORS request successfully, do the following.

Back-end (server): Set the HTTP header Access-Control-Allow-Credentials value to true. Also, make sure the HTTP headers Access-Control-Allow-Origin and Access-Control-Allow-Headers are set and not with a wildcard *.

Recommended Cookie settings per Chrome and Firefox update in 2021: SameSite=None and Secure. See MDN documentation

For more info on setting CORS in express js read the docs here

Front-end (client): Set the XMLHttpRequest.withCredentials flag to true, this can be achieved in different ways depending on the request-response library used:

• jQuery 1.5.1 xhrFields: {withCredentials: true}

• ES6 fetch() credentials: 'include'

• axios: withCredentials: true

Or

Avoid having to use CORS in combination with cookies. You can achieve this with a proxy.

If you for whatever reason don't avoid it. The solution is above.

It turned out that Chrome won't set the cookie if the domain contains a port. Setting it for localhost (without port) is not a problem. Many thanks to Erwin for this tip!

If you want to delete lines 5 through 10 and 12:

sed -e '5,10d;12d' file

This will print the results to the screen. If you want to save the results to the same file:

sed -i.bak -e '5,10d;12d' file

This will back the file up to file.bak, and delete the given lines.

Note: Line numbers start at 1. The first line of the file is 1, not 0.

Put script at the end of body tag.

<html>
    <body>
        .........
        <script src="main.js"></script>
    </body>
</html>

Raw HTML is actually perfectly valid in markdown. For instance:

Normal *markdown* paragraph.

<p class="myclass">This paragraph has a class "myclass"</p>

Just make sure the HTML is not inside a code block.

I am trying with the below. This seems to be working fine. Are there any limitations to this approach? Please confirm.

var now=new Date();                         // Sun Apr 02 2017 2:00:00 GMT+1000 (AEST)
var gmtRe = /GMT([\-\+]?\d{4})/;
var tz = gmtRe.exec(now)[1];               // +1000
var hour=tz/100;                           // 10
var min=tz%100;                            // 0
now.setHours(now.getHours()-hour);
now.setMinutes(now.getMinutes()-min);      // Sat Apr 01 2017 16:00:00 GMT

Try this I am also not 100 % sure

        for( int i = 0 ;i< dt.Rows.Count; i++)
        {
           If(dt.Rows[i].Product_id == 2)
           {
              dt.Rows[i].Columns["Product_name"].ColumnName = "cde";
           }
        }

Consider following code

<ul id="myTask">
  <li>Coding</li>
  <li>Answering</li>
  <li>Getting Paid</li>
</ul>

Now, here goes the difference

// Remove the myTask item when clicked.
$('#myTask').children().click(function () {
  $(this).remove()
});

Now, what if we add a myTask again?

$('#myTask').append('<li>Answer this question on SO</li>');

Clicking this myTask item will not remove it from the list, since it doesn't have any event handlers bound. If instead we'd used .on, the new item would work without any extra effort on our part. Here's how the .on version would look:

$('#myTask').on('click', 'li', function (event) {
  $(event.target).remove()
});

Summary:

The difference between .on() and .click() would be that .click() may not work when the DOM elements associated with the .click() event are added dynamically at a later point while .on() can be used in situations where the DOM elements associated with the .on() call may be generated dynamically at a later point.

Hi I know this was asked a while ago but I've just figured this out and it might help someone else. Not sure if this is exactly what you're looking for but this is how I call a stored proc and view the output using SQL Developer.
In SQL Developer when viewing the proc, right click and choose 'Run' or select Ctrl+F11 to bring up the Run PL/SQL window. This creates a template with the input and output params which you need to modify. My proc returns a sys_refcursor. The tricky part for me was declaring a row type that is exactly equivalent to the select stmt / sys_refcursor being returned by the proc:

DECLARE
  P_CAE_SEC_ID_N NUMBER;
  P_FM_SEC_CODE_C VARCHAR2(200);
  P_PAGE_INDEX NUMBER;
  P_PAGE_SIZE NUMBER;
  v_Return sys_refcursor;
  type t_row is record (CAE_SEC_ID NUMBER,FM_SEC_CODE VARCHAR2(7),rownum number, v_total_count number);
  v_rec t_row;

BEGIN
  P_CAE_SEC_ID_N := NULL;
  P_FM_SEC_CODE_C := NULL;
  P_PAGE_INDEX := 0;
  P_PAGE_SIZE := 25;

  CAE_FOF_SECURITY_PKG.GET_LIST_FOF_SECURITY(
    P_CAE_SEC_ID_N => P_CAE_SEC_ID_N,
    P_FM_SEC_CODE_C => P_FM_SEC_CODE_C,
    P_PAGE_INDEX => P_PAGE_INDEX,
    P_PAGE_SIZE => P_PAGE_SIZE,
    P_FOF_SEC_REFCUR => v_Return
  );
  -- Modify the code to output the variable
  -- DBMS_OUTPUT.PUT_LINE('P_FOF_SEC_REFCUR = ');
  loop
    fetch v_Return into v_rec;
    exit when v_Return%notfound;
    DBMS_OUTPUT.PUT_LINE('sec_id = ' || v_rec.CAE_SEC_ID || 'sec code = ' ||v_rec.FM_SEC_CODE);
  end loop;

END;

Pure js alternative to window.open

let a= document.createElement('a');
a.target= '_blank';
a.href= 'https://support.wwf.org.uk/';
a.click();

here is working example (stackoverflow snippets not allow to opening)

Type in the command shell:

 df -h 

or

df -m

or

df -k

It will show the list of free disk spaces for each mount point.

You can show/view single column also.

Type:

df -m |awk '{print $3}'

Note: Here 3 is the column number. You can choose which column you need.

You could use Universal Encoding Detector, but be aware that it will just give you best guess, not the actual encoding, because it's impossible to know encoding of a string "abc" for example. You will need to get encoding information elsewhere, eg HTTP protocol uses Content-Type header for that.

If you are working with MVC C#, this is the way to deal with printers and serial ports for dropdowns.

using System.Collections.Generic;
using System.Linq;
using System.IO.Ports;
using System.Drawing.Printing;

    public class Miclass
    {
        private void AllViews()
        {
            List<PortClass> ports = new List<PortClass>();
            List<Printersclass> Printersfor = new List<Printersclass>();
            string[] portnames = SerialPort.GetPortNames();
            /*PORTS*/
            for (int i = 0; i < portnames.Count(); i++)
            {
                ports.Add(new PortClass() { Name = portnames[i].Trim(), Desc = portnames[i].Trim() });
            }
            /*PRINTER*/
            for (int i = 0; i < PrinterSettings.InstalledPrinters.Count; i++)
            {
                Printersfor.Add(new Printersclass() { Name = PrinterSettings.InstalledPrinters[i].Trim(), Desc = PrinterSettings.InstalledPrinters[i].Trim() });
            }
        }
    }
    public class PortClass
    {
        public string Name { get; set; }
        public string Desc { get; set; }

        public override string ToString()
        {
            return string.Format("{0} ({1})", Name, Desc);
        }
    }
    public class Printersclass
    {
        public string Name { get; set; }
        public string Desc { get; set; }

        public override string ToString()
        {
            return string.Format("{0} ({1})", Name, Desc);
        }
    }

April 2015 Update

Since this question has been around a while, and some new conventions have come into play, I feel that I should mention the .live method has been depreciated.

In its place, the .on method has now been introduced.

Their documentation is quite useful in explaining how it works;

The .on() method attaches event handlers to the currently selected set of elements in the jQuery object. As of jQuery 1.7, the .on() method provides all functionality required for attaching event handlers. For help in converting from older jQuery event methods, see .bind(), .delegate(), and .live().

So, in order for you to target the 'input focused' event, you can use this in a script. Something like:

$('input').on("focus", function(){
   //do some stuff
});

This is quite robust and even allows you to use the TAB key as well.

Did you import it? Importing matplotlib is not enough.

>>> import matplotlib
>>> matplotlib.pyplot
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
AttributeError: 'module' object has no attribute 'pyplot'

but

>>> import matplotlib.pyplot
>>> matplotlib.pyplot

works.

pyplot is a submodule of matplotlib and not immediately imported when you import matplotlib.

The most common form of importing pyplot is

import matplotlib.pyplot as plt

Thus, your statements won't be too long, e.g.

plt.plot([1,2,3,4,5])

instead of

matplotlib.pyplot.plot([1,2,3,4,5])

And: pyplot is not a function, it's a module! So don't call it, use the functions defined inside this module instead. See my example above

In Java when you are making an object from a class like Person p = new Person();, p is actually an address of a memory location which is pointing to a type of Person.

When use a statemenet to print p you will see an address. The new key word makes a new memory location containing all the instance variables and methods which are included in class Person and p is the reference variable pointing to that memory location.

Another way to handle this that removes any need for includes at all is to use the autoload feature. Including everything your script needs "Just in Case" can impede performance. If your includes are all class or interface definitions, and you want to load them only when needed, you can overload the __autoload() function with your own code to find the appropriate class file and load it only when it's called. Here is the example from the manual:

function __autoload($class_name) {
    require_once $class_name . '.php';
}

$obj  = new MyClass1();
$obj2 = new MyClass2(); 

As long as you set your include_path variables accordingly, you never need to include a class file again.

While using Django with postgres 10.6, logging was enabled by default, and I was able to simply do:

tail -f /var/log/postgresql/*

Ubuntu 18.04, django 2+, python3+

In JavaScript everything is an object (or may at least be treated as an object), except primitives (booleans, null, numbers, strings and the value undefined (and symbol in ES6)):

console.log(typeof true);           // boolean
console.log(typeof 0);              // number
console.log(typeof "");             // string
console.log(typeof undefined);      // undefined
console.log(typeof null);           // object
console.log(typeof []);             // object
console.log(typeof {});             // object
console.log(typeof function () {}); // function

As you can see objects, arrays and the value null are all considered objects (null is a reference to an object which doesn't exist). Functions are distinguished because they are a special type of callable objects. However they are still objects.

On the other hand the literals true, 0, "" and undefined are not objects. They are primitive values in JavaScript. However booleans, numbers and strings also have constructors Boolean, Number and String respectively which wrap their respective primitives to provide added functionality:

console.log(typeof new Boolean(true)); // object
console.log(typeof new Number(0));     // object
console.log(typeof new String(""));    // object

As you can see when primitive values are wrapped within the Boolean, Number and String constructors respectively they become objects. The instanceof operator only works for objects (which is why it returns false for primitive values):

console.log(true instanceof Boolean);              // false
console.log(0 instanceof Number);                  // false
console.log("" instanceof String);                 // false
console.log(new Boolean(true) instanceof Boolean); // true
console.log(new Number(0) instanceof Number);      // true
console.log(new String("") instanceof String);     // true

As you can see both typeof and instanceof are insufficient to test whether a value is a boolean, a number or a string - typeof only works for primitive booleans, numbers and strings; and instanceof doesn't work for primitive booleans, numbers and strings.

Fortunately there's a simple solution to this problem. The default implementation of toString (i.e. as it's natively defined on Object.prototype.toString) returns the internal [[Class]] property of both primitive values and objects:

function classOf(value) {
    return Object.prototype.toString.call(value);
}

console.log(classOf(true));              // [object Boolean]
console.log(classOf(0));                 // [object Number]
console.log(classOf(""));                // [object String]
console.log(classOf(new Boolean(true))); // [object Boolean]
console.log(classOf(new Number(0)));     // [object Number]
console.log(classOf(new String("")));    // [object String]

The internal [[Class]] property of a value is much more useful than the typeof the value. We can use Object.prototype.toString to create our own (more useful) version of the typeof operator as follows:

function typeOf(value) {
    return Object.prototype.toString.call(value).slice(8, -1);
}

console.log(typeOf(true));              // Boolean
console.log(typeOf(0));                 // Number
console.log(typeOf(""));                // String
console.log(typeOf(new Boolean(true))); // Boolean
console.log(typeOf(new Number(0)));     // Number
console.log(typeOf(new String("")));    // String

Hope this article helped. To know more about the differences between primitives and wrapped objects read the following blog post: The Secret Life of JavaScript Primitives

Here are the results I got with ipython's timeit function:

from datetime import date
today = date.today()

timeit[Model.objects.filter(date_created__year=today.year, date_created__month=today.month, date_created__day=today.day)]
1000 loops, best of 3: 652 us per loop

timeit[Model.objects.filter(date_created__gte=today)]
1000 loops, best of 3: 631 us per loop

timeit[Model.objects.filter(date_created__startswith=today)]
1000 loops, best of 3: 541 us per loop

timeit[Model.objects.filter(date_created__contains=today)]
1000 loops, best of 3: 536 us per loop

contains seems to be faster.

You could simply do

d % 1 == 0

to check if double d is a whole.

In addition to all the answers provided so far, another reason for causing this exception can happen when you are saving data from list to database using ADO.Net.

Many developers will mistakenly use for loop or foreach and leave the SqlCommand to execute outside the loop, to avoid that make sure that you have like this code sample for example:

public static void Save(List<myClass> listMyClass)
    {
        using (var Scope = new System.Transactions.TransactionScope())
        {
            if (listMyClass.Count > 0)
            {
                for (int i = 0; i < listMyClass.Count; i++)
                {
                    SqlCommand cmd = new SqlCommand("dbo.SP_SaveChanges", myConnection);
                    cmd.CommandType = CommandType.StoredProcedure;
                    cmd.Parameters.Clear();

                    cmd.Parameters.AddWithValue("@ID", listMyClass[i].ID);
                    cmd.Parameters.AddWithValue("@FirstName", listMyClass[i].FirstName);
                    cmd.Parameters.AddWithValue("@LastName", listMyClass[i].LastName);

                    try
                    {
                        myConnection.Open();
                        cmd.ExecuteNonQuery();
                    }
                    catch (SqlException sqe)
                    {
                        throw new Exception(sqe.Message);
                    }
                    catch (Exception ex)
                    {
                        throw new Exception(ex.Message);
                    }
                    finally
                    {
                        myConnection.Close();
                    }
                }
            }
            else
            {
                throw new Exception("List is empty");
            }

            Scope.Complete();
        }
    }

From the documentation of XPath ( http://www.w3.org/TR/xpath/#location-paths ):

child::* selects all element children of the context node

child::text() selects all text node children of the context node

child::node() selects all the children of the context node, whatever their node type

So I guess your answer is:

$doc/PRESENTEDIN/X/child::node()

And if you want a flatten array of all nested nodes:

$doc/PRESENTEDIN/X/descendant::node()

There are two not bad libs for parsing user agent strings:

• user-agent-utils - java only, reached end-of-life
• ua-parser - multilanguage, archived
• uap-java - java implementation of above, actively maintained

Lucas's answer about core dumps is good. In my .cshrc I have:

alias core 'ls -lt core; echo where | gdb -core=core -silent; echo "\n"'

to display the backtrace by entering 'core'. And the date stamp, to ensure I am looking at the right file :(.

Added: If there is a stack corruption bug, then the backtrace applied to the core dump is often garbage. In this case, running the program within gdb can give better results, as per the accepted answer (assuming the fault is easily reproducible). And also beware of multiple processes dumping core simultaneously; some OS's add the PID to the name of the core file.

In ASP.NET Core, use PasswordHasher<TUser>.
 _{• Namespace: Microsoft.AspNetCore.Identity
 • Assembly: Microsoft.Extensions.Identity.Core.dll (NuGet | Source)}

To hash a password, use HashPassword():

var hashedPassword = new PasswordHasher<object?>().HashPassword(null, password);

To verify a password, use VerifyHashedPassword():

var passwordVerificationResult = new PasswordHasher<object?>().VerifyHashedPassword(null, hashedPassword, password);
switch (passwordVerificationResult)
{
    case PasswordVerificationResult.Failed:
        Console.WriteLine("Password incorrect.");
        break;
    
    case PasswordVerificationResult.Success:
        Console.WriteLine("Password ok.");
        break;
    
    case PasswordVerificationResult.SuccessRehashNeeded:
        Console.WriteLine("Password ok but should be rehashed and updated.");
        break;
    
    default:
        throw new ArgumentOutOfRangeException();
}

Pros:

• Part of the .NET platform. Much safer and trustworthier than building your own crypto algorithm.
• Configurable iteration count and future compatibility (see PasswordHasherOptions).
• Took Timing Attack into consideration when verifying password (source), just like what PHP and Go did.

Cons:

• Hashed password format incompatible with those hashed by other libraries or in other languages.

You can use

moment(date,"currentFormat").format("requiredFormat");

This should be used when date is not ISO Format as it'll tell moment what our current format is.

The Main method is Static. You can not invoke a non-static method from a static method.

GetRandomBits()

is not a static method. Either you have to create an instance of Program

Program p = new Program();
p.GetRandomBits();

or make

GetRandomBits() static.

du -s -- * | sort -n

(this willnot show hidden (.dotfiles) files)

Use du -sm for Mb units etc. I always use

du -smc -- * | sort -n

because the total line (-c) will end up at the bottom for obvious reasons :)

PS:

• See comments for handling dotfiles
• I frequently use e.g. 'du -smc /home// | sort -n |tail' to get a feel of where exactly the large bits are sitting

You can declare a dictionary inside a dictionary by nesting the {} containers:

d = {'dict1': {'foo': 1, 'bar': 2}, 'dict2': {'baz': 3, 'quux': 4}}

And then you can access the elements using the [] syntax:

print d['dict1']           # {'foo': 1, 'bar': 2}
print d['dict1']['foo']    # 1
print d['dict2']['quux']   # 4

Given the above, if you want to add another dictionary to the dictionary, it can be done like so:

d['dict3'] = {'spam': 5, 'ham': 6}

or if you prefer to add items to the internal dictionary one by one:

d['dict4'] = {}
d['dict4']['king'] = 7
d['dict4']['queen'] = 8

Select-Object returns a custom PSObject with just the properties specified. Even with a single property, you don't get the ACTUAL variable; it is wrapped inside the PSObject.

Instead, do:

Get-Date | Select-Object -ExpandProperty DayOfWeek

That will get you the same result as:

(Get-Date).DayOfWeek

The difference is that if Get-Date returns multiple objects, the pipeline way works better than the parenthetical way as (Get-ChildItem), for example, is an array of items. This has changed in PowerShell v3 and (Get-ChildItem).FullPath works as expected and returns an array of just the full paths.

You will get an error if you try to close/disconnect outside of the method. The best solution is to close the connection in both callbacks in the method. The dummy code is here.

const newTodo = new Todo({text:'cook dinner'});

newTodo.save().then((docs) => {
  console.log('todo saved',docs);
  mongoose.connection.close();
},(e) => {
  console.log('unable to save');
});

I have encountered that problem myself and I made my launchers in a .bat so you could choose the version you want to launch.

The only problem is your .py must be in the python folder, but anyway here is the code:

For Python2

@echo off
title Python2 Launcher by KinDa
cls
echo Type the exact version of Python you use (eg. 23, 24, 25, 26)
set/p version=
cls
echo Type the file you want to launch without .py (eg. hello world, calculator)
set/p launch=
path = %PATH%;C:\Python%version%
cd C:\Python%version%
python %launch%.py
pause

For Python3

@echo off
title Python3 Launcher by KinDa
cls
echo Type the exact version of Python you use (eg. 31, 32, 33, 34)
set/p version=
cls
echo Type the file you want to launch without .py (eg. hello world, calculator)
set/p launch=
cls
set path = %PATH%:C:\Python%version%
cd C:\Python%version%
python %launch%.py
pause

Save them as .bat and follow the instructions inside.

$ git push origin develop:master

or, more generally

$ git push <remote> <local branch name>:<remote branch to push into>

To open a workbook as hidden in the existing instance of Excel, use following:

    Application.ScreenUpdating = False
    Workbooks.Open Filename:=FilePath, UpdateLinks:=True, ReadOnly:=True
    ActiveWindow.Visible = False
    ThisWorkbook.Activate
    Application.ScreenUpdating = True

Because of the infinite superiority of Python over Java, Python has not one, but two toString operations.

One is __str__, the other is __repr__

__str__ will return a human readable string. __repr__ will return an internal representation.

__repr__ can be invoked on an object by calling repr(obj) or by using backticks `obj`.

When printing lists as well as other container classes, the contained elements will be printed using __repr__.

Sorry, but--in my opinion--RichieHindle is completely right about saying that method...

It's a function which is a member of a class.

Here is the example of a function that becomes the member of the class. Since then it behaves as a method of the class. Let's start with the empty class and the normal function with one argument:

>>> class C:
...     pass
...
>>> def func(self):
...     print 'func called'
...
>>> func('whatever')
func called

Now we add a member to the C class, which is the reference to the function. After that we can create the instance of the class and call its method as if it was defined inside the class:

>>> C.func = func
>>> o = C()
>>> o.func()
func called

We can use also the alternative way of calling the method:

>>> C.func(o)
func called

The o.func even manifests the same way as the class method:

>>> o.func
<bound method C.func of <__main__.C instance at 0x000000000229ACC8>>

And we can try the reversed approach. Let's define a class and steal its method as a function:

>>> class A:
...     def func(self):
...         print 'aaa'
...
>>> a = A()
>>> a.func
<bound method A.func of <__main__.A instance at 0x000000000229AD08>>
>>> a.func()
aaa

So far, it looks the same. Now the function stealing:

>>> afunc = A.func
>>> afunc(a)
aaa    

The truth is that the method does not accept 'whatever' argument:

>>> afunc('whatever')
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
TypeError: unbound method func() must be called with A instance as first 
  argument (got str instance instead)

IMHO, this is not the argument against method is a function that is a member of a class.

Later found the Alex Martelli's answer that basically says the same. Sorry if you consider it duplication :)

[Edit] After reviewing the Mongoose documentation, it looks like you can send each query result as a separate chunk; the web server uses chunked transfer encoding by default so all you have to do is wrap an array around the items to make it a valid JSON object.

Roughly (untested):

app.get('/users/:email/messages/unread', function(req, res, next) {
  var firstItem=true, query=MessageInfo.find(/*...*/);
  res.writeHead(200, {'Content-Type': 'application/json'});
  query.each(function(docs) {
    // Start the JSON array or separate the next element.
    res.write(firstItem ? (firstItem=false,'[') : ',');
    res.write(JSON.stringify({ msgId: msg.fileName }));
  });
  res.end(']'); // End the JSON array and response.
});

Alternatively, as you mention, you can simply send the array contents as-is. In this case the response body will be buffered and sent immediately, which may consume a large amount of additional memory (above what is required to store the results themselves) for large result sets. For example:

// ...
var query = MessageInfo.find(/*...*/);
res.writeHead(200, {'Content-Type': 'application/json'});
res.end(JSON.stringify(query.map(function(x){ return x.fileName })));

I didn't see anyone answer this correctly. So I'm posting it here. In order to get columns to show up you need to specify the following line.

lvRegAnimals.View = View.Details;

And then add your columns after that.

lvRegAnimals.Columns.Add("Id", -2, HorizontalAlignment.Left);
lvRegAnimals.Columns.Add("Name", -2, HorizontalAlignment.Left);
lvRegAnimals.Columns.Add("Age", -2, HorizontalAlignment.Left);

Hope this helps anyone else looking for this answer in the future.

Go to Window → Preferences → Java → Installed JREs. Select the JRE you're using, click Edit, and there will be a line for Default VM Arguments which will apply to every execution. For instance, I use this on OS X to hide the icon from the dock, increase max memory and turn on assertions:

-Xmx512m -ea -Djava.awt.headless=true

Most important

Keep in mind that relative URLs are resolved from the URL of your stylesheet.

So it will work if folder images is inside the stylesheets folder.

From you description you would need to change it to either

url("../images/plaid.jpg")

or

url("/images/plaid.jpg") 

Additional 1

Also you cannot have no selector..

CSS is applied through selectors..

Additional 2

You should use either the shorthand background to pass multiple values like this

background: url("../images/plaid.jpg") no-repeat;

or the verbose syntax of specifying each property on its own

background-image: url("../images/plaid.jpg");
background-repeat:no-repeat;

I have the same problem and I solved it and the explanation is as follow:

If the Seaborn package is not installed in anaconda, you will not be able to update it, namely, if in the Terminal we type: conda update seaborn

it will fail showing: "PackageNotFoundError: Package not found: 'seaborn' Package 'seaborn' is not installed in /Users/yifan/anaconda"

Thus we need to install seaborn in anaconda first by typing in Terminal: conda install -c https://conda.anaconda.org/anaconda seaborn

Then the seaborn will be fetched and installed in the environment of anaconda, namely in my case, /Users/yifan/anaconda

Once this installation is done, we will be able to import seaborn in python.

Side note, to check and list all discoverable environments where python is installed in anaconda, type in Terminal: conda info --envs

If you are not using SSMS then here is the syntax:

ALTER TABLE <table_name>
ADD <constraint_name> FOREIGN KEY 
(<column_name1> ,
<column_name2> )
REFERENCES <table_name>
(<column_name1> ,
<column_name2>)

http://infogoal.com/sql/sql-add-foreignkey.htm

What you may want to do is include a script on all pages that does the following ... 1. find the youtube-iframe : searching for it by width and height by title or by finding www.youtube.com in its source. You can do that by ... - looping through the window.frames by a for-in loop and then filter out by the properties

1. inject jscript in the iframe of the current page adding the onYoutubePlayerReady must-include-function http://shazwazza.com/post/Injecting-JavaScript-into-other-frames.aspx

2. Add the event listeners etc..

Hope this helps

I ended up doing the following and it works:

return DatabaseContext.Applications
     .Include("Children.ChildRelationshipType");

Very easy, just use the SQLCMD-syntax.

Remember to enable SQLCMD-mode in the SSMS, look under Query -> SQLCMD Mode

Try execute:

!!DIR
!!:GO

or maybe:
!!DIR "c:/temp"
!!:GO

For List<List<List<x>>> and so on, use

list.SelectMany(x => x.SelectMany(y => y)).ToList();

This has been posted in a comment, but it does deserves a separate reply in my opinion.

For storing a single row output into a variable from the select into query :

declare v_username varchare(20); SELECT username into v_username FROM users WHERE user_id = '7';

this will store the value of a single record into the variable v_username.

For storing multiple rows output into a variable from the select into query :

you have to use listagg function. listagg concatenate the resultant rows of a coloumn into a single coloumn and also to differentiate them you can use a special symbol. use the query as below SELECT listagg(username || ',' ) within group (order by username) into v_username FROM users;

You could use a javax.swing.ImageIcon and add it to a JLabel using setIcon() method, then add the JLabel to the JPanel.

declare it "static" like this:

static void MyClass::printInformation() { return; }

If you mean if you can do ctor chaining in C#, the answer is yes. The question has already been asked.

However it seems from the comments, it seems what you really intend to ask is 'Can I call an overloaded constructor from within another constructor with pre/post processing?'
Although C# doesn't have the syntax to do this, you could do this with a common initialization function (like you would do in C++ which doesn't support ctor chaining)

class A
{
  //ctor chaining
  public A() : this(0)
  {  
      Console.WriteLine("default ctor"); 
  }

  public A(int i)
  {  
      Init(i); 
  }

  // what you want
  public A(string s)
  {  
      Console.WriteLine("string ctor overload" );
      Console.WriteLine("pre-processing" );
      Init(Int32.Parse(s));
      Console.WriteLine("post-processing" );
  }

   private void Init(int i)
   {
      Console.WriteLine("int ctor {0}", i);
   }
}

If you'd like to use base graphics, you may have a look at this. An extract:

You can correct this with the res= argument to png, which specifies the number of pixels per inch. The smaller this number, the larger the plot area in inches, and the smaller the text relative to the graph itself.

This work for me

$('#mySelect option:contains(' + value + ')').attr('selected', 'selected');

The easiest way is to redirect the output of the echo by >>:

echo 'VNCSERVERS="1:root"' >> /etc/sysconfig/configfile
echo 'VNCSERVERARGS[1]="-geometry 1600x1200"' >> /etc/sysconfig/configfile

And, if you want to verify that you HAVEN'T broken your relationships and introduced orphans, once you have re-armed your checks, i.e.

ALTER TABLE foo CHECK CONSTRAINT ALL

or

ALTER TABLE foo CHECK CONSTRAINT FK_something

then you can run back in and do an update against any checked columns like so:

UPDATE myUpdatedTable SET someCol = someCol, fkCol = fkCol, etc = etc

And any errors at that point will be due to failure to meet constraints.

First off, a PetStore is not a farm.

Let's get past this though. You actually don't need access to the private members, you have everything you need in the public interface:

Animal_* getAnimal_(int i);
void addAnimal_(Animal_* newAnimal);

These are the methods you're given access to and these are the ones you should use.

I mean I did this Inheritance so I can add animals to my PetStore but now since sizeF is private how can I do that ??

Simple, you call addAnimal. It's public and it also increments sizeF.

Also, note that

PetStore()
{
 idF=0;
};

is equivalent to

PetStore() : Farm()
{
 idF=0;
};

i.e. the base constructor is called, base members are initialized.

If importing a database, you need to create one first with the same name, then select it and then IMPORT the existing database to it.

Hope it works for you!

The easiest way is to convert to a date:

SELECT *
FROM dbo.LogRequests
WHERE cast(dateX as date) = '2014-05-09';

Often, such expressions preclude the use of an index. However, according to various sources on the web, the above is sargable (meaning it will use an index), such as this and this.

I would be inclined to use the following, just out of habit:

SELECT *
FROM dbo.LogRequests
WHERE dateX >= '2014-05-09' and dateX < '2014-05-10';

Other solution is to remove the ubuntu bundler in my case i used:

sudo apt-get remove ruby-bundler 

That worked for me.

If the mouse over for all over the component is your option, you can directly is @hostListener to handle the events to perform the mouse over al below.

  import {HostListener} from '@angular/core';

  @HostListener('mouseenter') onMouseEnter() {
    this.hover = true;
    this.elementRef.nativeElement.addClass = 'edit';
  }

  @HostListener('mouseleave') onMouseLeave() {
    this.hover = false;
    this.elementRef.nativeElement.addClass = 'un-edit';
  }

Its available in @angular/core. I tested it in angular 4.x.x

Try inserting this clearing div before the last </div>

<div style="clear: both; line-height: 0;">&nbsp;</div>

Also, while installing Visual Studio 2013, ensure that you have checked "Web Developer Tools"

The datepicker('setDate') sets the date in the datepicket not in the input.

You should add the date and set it in the input.

var date2 = $('.pickupDate').datepicker('getDate');
var nextDayDate = new Date();
nextDayDate.setDate(date2.getDate() + 1);
$('input').val(nextDayDate);

Stopwatch is designed for this purpose and is one of the best ways to measure time execution in .NET.

var watch = System.Diagnostics.Stopwatch.StartNew();
// the code that you want to measure comes here
watch.Stop();
var elapsedMs = watch.ElapsedMilliseconds;

Do not use DateTime to measure time execution in .NET.

UPDATE:

As pointed out by @series0ne in the comments section: If you want a real precise measurement of the execution of some code, you will have to use the performance counters that's built into the operating system. The following answer contains a nice overview.

You can hijack your Android audio port using an Arduino board like this. Then, you have two options (as far as I'm concerned):

1) Buy another Arduino Shield that supports RFID. I haven't seen one that supports UHF so far.

2) Try to connect your Arduino hijack with a USB RFID reader and build some embedded hardware kit.

Right now, I'm working in the second option but with iPhone.

As for me I decided to use paddings. It is not exactly what you need, but may be useful in some cases.

table td {
    padding: 15px 0;
}

Worked for me:

      var first = regexLabelOut.replace(/,.*/g, "");

You could put it in an Excel sheet, idk if it'll be worth it for you if its needed for other things but storing info in excel sheets is a lot nicer because you can easily read and write at the same time with the

 'this gives you an excel app
 oExcel = CreateObject("Excel.Application")

 'this opens a work book of your choice, just set "Target" to a filepath
 oBook = oExcel.Workbooks.Open(Target)

 'how to read
 set readVar = oExcel.Cell(1,1).value
 'how to write
 oExcel.Cell(1,2).value = writeVar

 'Saves & Closes Book then ends excel
 oBook.Save
 oBook.Close
 oExcel.Quit

sorry if this answer isnt helpful, first time writing an answer and just thought this might be a nicer way for you

Just use this

$i=0;
foreach ($object as $key =>$value)
{
$i++;
}

the variable $i is number of keys.

You can use like this for check password contain at-least 1 Uppercase, 1 Lowercase, 1 Numeric and 1 special character :

$this->validate($request, [
'name' => 'required|min:3|max:50',
'email' => 'email',
'password' => 'required|confirmed|min:6|regex:/^(?=.*?[A-Z])(?=.*?[a-z])(?=.*?[0-9])(?=.*?[#?!@$%^&*-]).{6,}$/']);

How about this?

    enum class ErrorCodes : int{
          InvalidInput = 0
    };

    std::cout << ((int)error == 0 ? "InvalidInput" : "") << std::endl;

etc... I know this is a highly contrived example but I think it has application where applicable and needed and is certainly shorter than writing a script for it.

lets put it in this way:
actually Modulus operator does the same division but it does not care about the answer , it DOES CARE ABOUT reminder for example if you divide 7 to 5 ,
so , lets me take you through a simple example:
think 5 is a block, then for example we going to have 3 blocks in 15 (WITH Nothing Left) , but when that loginc comes to this kinda numbers {1,3,5,7,9,11,...} , here is where the Modulus comes out , so take that logic that i said before and apply it for 7 , so the answer gonna be that we have 1 block of 5 in 7 => with 2 reminds in our hand! that is the modulus!!!
but you were asking about 5 % 7 , right ?
so take the logic that i said , how many 7 blocks do we have in 5 ???? 0
so the modulus returns 0...
that's it ...

Passphrases can be added to an existing key or changed without regenerating the key pair:
Note This will work if keys doesn't had a passphrase, otherwise you'll get this: Enter old passphrase: then Bad passphrase

$ ssh-keygen -p
Enter file in which the key is (/Users/tekkub/.ssh/id_rsa):
Key has comment '/Users/tekkub/.ssh/id_rsa'
Enter new passphrase (empty for no passphrase):
Enter same passphrase again:
Your identification has been saved with the new passphrase.

If your key had passphrase then, There's no way to recover the passphrase for a pair of SSH keys. In that case you have to create a new pair of SSH keys.

1. Generating SSH keys

Finally, the latest node.js release v10.3.0 has natively supported fs promises.

const fsPromises = require('fs').promises; // or require('fs/promises') in v10.0.0
fsPromises.writeFile(ASIN + '.json', JSON.stringify(results))
  .then(() => {
    console.log('JSON saved');
  })
  .catch(er => {
    console.log(er);
  });

You can check the official documentation for more details. https://nodejs.org/api/fs.html#fs_fs_promises_api

NSCalendar *calendar = [NSCalendar currentCalendar];
NSDateComponents *components = [calendar components:(NSCalendarUnitYear | NSCalendarUnitMonth | NSCalendarUnitDay) fromDate:myNSDateInstance];
NSInteger year = [components year];
// NSInteger month = [components month];
NSString *yearStr = [NSString stringWithFormat:@"%ld", year];

I believe the simpler workaround would be to change the 'context' itself.

So, for example, instead of giving:

docker build -t hello-demo-app .

which sets the current directory as the context, let's say you wanted the parent directory as the context, just use:

docker build -t hello-demo-app ..

Either delete the selector or set it to the same color as your text appears normally.

Why not first apply the whole test, and then add individual tests for characters and numbers? Anyway, if you want to do it all in one regexp, use positive lookahead:

/^(?=.*[0-9])(?=.*[a-zA-Z])([a-zA-Z0-9]+)$/

the only one that worked for me:

function goBackAndRefresh() {
  window.history.go(-1);
  setTimeout(() => {
    location.reload();
  }, 0);
}

Solution :

1). Delete the C:\Users\username.gradle folder

2). Download http://downloads.gradle.org/distributions/gradle-2.2.1-all.zip

3). Create a new project in android studio.

4). When this time it stucks at gradle building, Force close the android studio.

5) Now go to C:\Users\username.gradle\wrapper\dists\gradle-2.2.1-all\c64ydeuardnfqctvr1gm30w53 (the end directory name may be different)

6) Delete gradle-2.2.1-all.zip.lck and other files from this directory.

7) Paste the new downloaded gradle-2.2.1-all.zip here.

8) Run the android studio. :)

When you stop building a project when the compiler is in the middle of something "important", this error could appear. In that case, building the project again and letting it finish normally makes this error disappear.

Here's how I did it.

• Make/Convert csv file to be seperated by tabs (\t) AND not enclosed by any quotes (sqlite interprets quotes literally - says old docs)

• Enter the sqlite shell of the db to which the data needs to be added

  sqlite> .separator "\t" ---IMPORTANT! should be in double quotes sqlite> .import afile.csv tablename-to-import-to

You can stop the image from overlapping it's edges by clipping the image and applying a wrapper element which sets the blur effect to 0 pixels. This is how it looks like:

HTML

<div id="wrapper">
  <div id="image"></div>
</div>

CSS

#wrapper {
  width: 1024px;
  height: 768px;

  border: 1px solid black;

  // 'blur(0px)' will prevent the wrapped image
  // from overlapping the border
  -webkit-filter: blur(0px);
  -moz-filter: blur(0px);
  -ms-filter: blur(0px);
  filter: blur(0px);
}

#wrapper #image {
  width: 1024px;
  height: 768px;

  background-image: url("../images/cats.jpg");
  background-size: cover;

  -webkit-filter: blur(10px);
  -moz-filter: blur(10px);
  -ms-filter: blur(10px);
  filter: blur(10px);

  // Position 'absolute' is needed for clipping
  position: absolute;
  clip: rect(0px, 1024px, 768px, 0px);
}

I came across a number of limitations related to prepared statement:

1. The prepared statements are cached only inside the same session (Postgres), so it will really work only with connection pooling
2. A lot of different prepared statements as proposed by @BalusC may cause the cache to overfill and previously cached statements will be dropped
3. The query has to be optimized and use indices. Sounds obvious, however e.g. the ANY(ARRAY...) statement proposed by @Boris in one of the top answers cannot use indices and query will be slow despite caching
4. The prepared statement caches the query plan as well and the actual values of any parameters specified in the statement are unavailable.

Among the proposed solutions I would choose the one that doesn't decrease the query performance and makes the less number of queries. This will be the #4 (batching few queries) from the @Don link or specifying NULL values for unneeded '?' marks as proposed by @Vladimir Dyuzhev

try:
    while True:
        p = ""
        a = input()
        while a != 0:
            l = a % 2
            b = a - l
            a = b / 2
            p = str(l) + p
        print(p)
except:
    print ("write 1 number")

Since the question on how to set fields mandatory pops up under each post, I wrote a small example on how to set fields as required:

public class ExampleDTO {
    @NotNull
    private String mandatoryParam;

    private String optionalParam;
    
    @DateTimeFormat(iso = ISO.DATE) //accept Dates only in YYYY-MM-DD
    @NotNull
    private LocalDate testDate;

    public String getMandatoryParam() {
        return mandatoryParam;
    }
    public void setMandatoryParam(String mandatoryParam) {
        this.mandatoryParam = mandatoryParam;
    }
    public String getOptionalParam() {
        return optionalParam;
    }
    public void setOptionalParam(String optionalParam) {
        this.optionalParam = optionalParam;
    }
    public LocalDate getTestDate() {
        return testDate;
    }
    public void setTestDate(LocalDate testDate) {
        this.testDate = testDate;
    }
}

//Add this to your rest controller class
@RequestMapping(value = "/test", method = RequestMethod.GET)
public String testComplexObject (@Valid ExampleDTO e){
    System.out.println(e.getMandatoryParam() + " " + e.getTestDate());
    return "Does this work?";
}

Remember, you're committing changes, not files.

For this reason, it's very rare that I don't use git add -p (or the magit equivalent) to add my changes.

This will replace all ? with ':

UPDATE dbo.authors    
SET    city = replace(city, '?', '''')
WHERE city LIKE '%?%'

If you need to update more than one column, you can either change city each time you execute to a different column name, or list the columns like so:

UPDATE dbo.authors    
SET    city = replace(city, '?', '''')
      ,columnA = replace(columnA, '?', '''')
WHERE city LIKE '%?%'
OR columnA LIKE '%?%'

When you say:

 #include <cstring>

the g++ compiler should put the <string.h> declarations it itself includes into the std:: AND the global namespaces. It looks for some reason as if it is not doing that. Try replacing one instance of strcpy with std::strcpy and see if that fixes the problem.

Here is an example from my code (for threaded pool, but just change class name and you'll have process pool):

def execute_run(rp): 
   ... do something 

pool = ThreadPoolExecutor(6)
for mat in TESTED_MATERIAL:
    for en in TESTED_ENERGIES:
        for ecut in TESTED_E_CUT:
            rp = RunParams(
                simulations, DEST_DIR,
                PARTICLE, mat, 960, 0.125, ecut, en
            )
            pool.submit(execute_run, rp)
pool.join()

Basically:

• pool = ThreadPoolExecutor(6) creates a pool for 6 threads
• Then you have bunch of for's that add tasks to the pool
• pool.submit(execute_run, rp) adds a task to pool, first arogument is a function called in in a thread/process, rest of the arguments are passed to the called function.
• pool.join waits until all tasks are done.

XDocument is from the LINQ to XML API, and XmlDocument is the standard DOM-style API for XML. If you know DOM well, and don't want to learn LINQ to XML, go with XmlDocument. If you're new to both, check out this page that compares the two, and pick which one you like the looks of better.

I've just started using LINQ to XML, and I love the way you create an XML document using functional construction. It's really nice. DOM is clunky in comparison.

if you want to run an update, delete, or insert statement, you should use the ExecuteNonQuery. ExecuteNonQuery returns the number of rows affected by the statement.

How to Set Count On

Simply commit the local changes and merge commit -a

Better you copy and move them to your own resources. Some resources might not be available on previous Android versions. Here is a link with all drawables available on each Android version thanks to @fiXedd

Add

actionBar.setHomeButtonEnabled(true);

and then add the following

@Override
public boolean onOptionsItemSelected(MenuItem menuItem)
{       
    switch (menuItem.getItemId()) {
        case android.R.id.home:
            onBackPressed();
            return true;
        default:
            return super.onOptionsItemSelected(menuItem);
    }
}

As suggested by naXa I've added a check on the itemId, to have it work correctly in case there are multiple buttons on the action bar.

AFAIK in JAVASCRIPT when a variable is declared but has not assigned value, its type is undefined. so we can check variable even if it would be an object holding some instance in place of value.

create a helper method for checking nullity that returns true and use it in your API.

helper function to check if variable is empty:

function isEmpty(item){
    if(item){
        return false;
    }else{
        return true;
    }
}

try-catch exceptional API call:

try {

    var pass, cpass, email, cemail, user; // only declared but contains nothing.

    // parametrs checking
    if(isEmpty(pass) || isEmpty(cpass) || isEmpty(email) || isEmpty(cemail) || isEmpty(user)){
        console.log("One or More of these parameter contains no vlaue. [pass] and-or [cpass] and-or [email] and-or [cemail] and-or [user]");
    }else{
        // do stuff
    }

} catch (e) {
    if (e instanceof ReferenceError) {
        console.log(e.message); // debugging purpose
        return true;
    } else {
        console.log(e.message); // debugging purpose
        return true;
    }
}

some test cases:

var item = ""; // isEmpty? true
var item = " "; // isEmpty? false
var item; // isEmpty? true
var item = 0; // isEmpty? true
var item = 1; // isEmpty? false
var item = "AAAAA"; // isEmpty? false
var item = NaN; // isEmpty? true
var item = null; // isEmpty? true
var item = undefined; // isEmpty? true

console.log("isEmpty? "+isEmpty(item));

some time joins on the table will be an overhead. lets say for OLAP. if i have two tables one is ORDERS table and other one is ORDER_DETAILS. For getting all the order details we have to join two tables this will make the query slower when no of rows in the tables increase lets say in millions or so.. left/right join is too slower than inner join. I Think if we add JSON string/Object in the respective ORDERS entry JOIN will be avoided. add report generation will be faster...

Well when you post, the browser only outputs $title - all your HTML tags and doctype go away. You need to include those in your insert.php file:

<!DOCTYPE html PUBLIC"-//W3C//DTD XHTML 1.0 Strict//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="content-type" content="text/html; charset=utf-8" />
<title>insert page</title></head>
<body>
<?php 

   $title = $_POST["title"];
   $price = $_POST["price"];

  echo $title;


 ?>  
</body>
</html>

git log -1 --format="%an %ae%n%cn %ce" a2c25061

The Pretty Formats section of the git show documentation contains

• format:<string>

The format:<string> format allows you to specify which information you want to show. It works a little bit like printf format, with the notable exception that you get a newline with %n instead of \n …

The placeholders are:

• %an: author name
• %ae: author email
• %cn: committer name
• %ce: committer email

print Cast('1/1/' + cast(datepart(yyyy, getdate()) as nvarchar(4)) as date)

There are a lot of different ways to look at this decision from development, IT, and business objectives, so don't feel bad if it seems overwhelming. But also - don't overthink scalability.

Think about your requirements.

I've engineered websites which have serviced over 8M uniques a day and delivered terabytes of video a week built on infrastructures starting at $250k in capital hardware unr by a huge $MM IT labor staff.

But I've also had smaller websites which were designed to generate $10-$20k per year, didn't have very high traffic, db or processing requirements, and I ran those off a $10/mo generic hosting account without compromise.

In the future, deployment will look more like Heroku than AWS, just because of progress. There is zero value in the IT knob-turning of scaling internet infrastructures which isn't increasingly automatable, and none of it has anything to do with the value of the product or service you are offering.

Also, keep in mind with a commercial website - scalability is what we often call a 'good problem to have' - although scalability issues with sites like Facebook and Twitter were very high-profile, they had zero negative effect on their success - the news might have even contributed to more signups (all press is good press).

If you have a service which is generating a 100k+ uniques a day and having scaling issues, I'd be glad to take it off your hands for you no matter what the language, db, platform, or infrastructure you are running on!

Scalability is a fixable implementation problem - not having customers is an existential issue.

64/32 bit error? I found this as a problem as my dev machine was 32bit and the production server 64bit. If so, you may need to call the 32bit runtime directly from the command line.

This link says it better (No 64bit JET driver): http://social.msdn.microsoft.com/forums/en-US/sqlintegrationservices/thread/da076e51-8149-4948-add1-6192d8966ead/

As many others have pointed out there is no first value in a dictionary. The sorting in them is arbitrary and you can't count on the sorting being the same every time you access the dictionary. However if you wanted to print the keys there a couple of ways to it:

for key, value in prices.items():
    print(key)

This method uses tuple assignment to access the key and the value. This handy if you need to access both the key and the value for some reason.

for key in prices.keys():
    print(key)

This will only gives access to the keys as the keys() method implies.

if you used:

jQuery.fn.exists = function(){return ($(this).length > 0);}
if ($(selector).exists()) { }

you would imply that chaining was possible when it is not.

This would be better

jQuery.exists = function(selector) {return ($(selector).length > 0);}
if ($.exists(selector)) { }

HTML, CSS, JS are all good as given in above answers. However they won't stop user from clicking the loader and visiting page. And if page time is large, it looks broken and defeats the purpose.

So in CSS consider adding

pointer-events: none;
cursor: default;

Also, instead of using gif files, if you are using fontawesome which everybody uses now a days, consider using in your html

<i class="fa fa-spinner fa-spin">

I'm partial to scikits.statsmodels. Here an example:

import statsmodels.api as sm
import numpy as np
import matplotlib.pyplot as plt

X = np.random.rand(100)
Y = X + np.random.rand(100)*0.1

results = sm.OLS(Y,sm.add_constant(X)).fit()

print results.summary()

plt.scatter(X,Y)

X_plot = np.linspace(0,1,100)
plt.plot(X_plot, X_plot*results.params[0] + results.params[1])

plt.show()

The only tricky part is sm.add_constant(X) which adds a columns of ones to X in order to get an intercept term.

     Summary of Regression Results
=======================================
| Dependent Variable:            ['y']|
| Model:                           OLS|
| Method:                Least Squares|
| Date:               Sat, 28 Sep 2013|
| Time:                       09:22:59|
| # obs:                         100.0|
| Df residuals:                   98.0|
| Df model:                        1.0|
==============================================================================
|                   coefficient     std. error    t-statistic          prob. |
------------------------------------------------------------------------------
| x1                      1.007       0.008466       118.9032         0.0000 |
| const                 0.05165       0.005138        10.0515         0.0000 |
==============================================================================
|                          Models stats                      Residual stats  |
------------------------------------------------------------------------------
| R-squared:                     0.9931   Durbin-Watson:              1.484  |
| Adjusted R-squared:            0.9930   Omnibus:                    12.16  |
| F-statistic:                1.414e+04   Prob(Omnibus):           0.002294  |
| Prob (F-statistic):        9.137e-108   JB:                        0.6818  |
| Log likelihood:                 223.8   Prob(JB):                  0.7111  |
| AIC criterion:                 -443.7   Skew:                     -0.2064  |
| BIC criterion:                 -438.5   Kurtosis:                   2.048  |
------------------------------------------------------------------------------

Jack M. is right. Do it this way:

>>> class City:
...     def __init__(self, city=None):
...         self.city = city
...     def __repr__(self):
...         if self.city:  return self.city
...         return ''
...
>>> c = City('Berlin')
>>> print c
Berlin
>>> c = City()
>>> print c

>>>

You can disable expandtab option from within Vim as below:

:set expandtab!

or

:set noet

PS: And set it back when you are done with inserting tab, with "set expandtab" or "set et"

PS: If you have tab set equivalent to 4 spaces in .vimrc (softtabstop), you may also like to set it to 8 spaces in order to be able to insert a tab by pressing tab key once instead of twice (set softtabstop=8).

You have the following options:

1. Replace the first occurrence

var text = "this is some sample text that i want to replace and this i WANT to replace as well.";_x000D_
var new_text = text.replace('want', 'dont want');_x000D_
// new_text is "this is some sample text that i dont want to replace and this i WANT to replace as well"_x000D_
console.log(new_text)

2. Replace all occurrences - case sensitive

var text = "this is some sample text that i want to replace and this i WANT to replace as well.";_x000D_
var new_text = text.replace(/want/g, 'dont want');_x000D_
// new_text is "this is some sample text that i dont want to replace and this i WANT to replace as well_x000D_
console.log(new_text)

3. Replace all occurrences - case insensitive

var text = "this is some sample text that i want to replace and this i WANT to replace as well.";_x000D_
var new_text = text.replace(/want/gi, 'dont want');_x000D_
// new_text is "this is some sample text that i dont want to replace and this i dont want to replace as well_x000D_
console.log(new_text)

More info -> here

The best way is to import the image first and then use it.

import React, { Component } from 'react';
import logo from '../logo.svg';
export default class Header extends Component {
  render() {
    return (
      <div className="row">
        <div className="logo">
          <img src={logo} width="100" height="50" />
        </div>
      </div>
    );
  }
} 

Chrome DevTools, Safari Inspector and Firebug support getEventListeners(node).

 <asp:GridView ID="GridView1" runat="server" PageSize="2" AutoGenerateColumns="false"
            AllowPaging="true" BackColor="White" BorderColor="#CC9966" BorderStyle="None"
            BorderWidth="1px" CellPadding="4" OnRowEditing="GridView1_RowEditing" OnRowUpdating="GridView1_RowUpdating"
            OnPageIndexChanging="GridView1_PageIndexChanging" OnRowCancelingEdit="GridView1_RowCancelingEdit"
            OnRowDeleting="GridView1_RowDeleting">
            <FooterStyle BackColor="#FFFFCC" ForeColor="#330099" />
            <RowStyle BackColor="White" ForeColor="#330099" />
            <SelectedRowStyle BackColor="#FFCC66" Font-Bold="True" ForeColor="#663399" />
            <PagerStyle BackColor="#FFFFCC" ForeColor="#330099" HorizontalAlign="Center" />
            <HeaderStyle BackColor="#990000" Font-Bold="True" ForeColor="#FFFFCC" />
            <Columns>
            <asp:TemplateField HeaderText="SerialNo">
            <ItemTemplate>
            <%# Container .DataItemIndex+1 %>.&nbsp
            </ItemTemplate>
            </asp:TemplateField>
                <asp:TemplateField HeaderText="RollNo">
                    <ItemTemplate>
                        <%--<asp:Label ID="lblrollno" runat="server" Text='<%#Eval ("RollNo")%>'></asp:Label>--%>
                        <asp:TextBox ID="txtrollno" runat="server" Text='<%#Eval ("RollNo")%>'></asp:TextBox>
                    </ItemTemplate>
                </asp:TemplateField>
                <asp:TemplateField HeaderText="SName">
                    <ItemTemplate>
                    <%--<asp:Label ID="lblsname" runat="server" Text='<%#Eval("SName")%>'></asp:Label>--%>
                        <asp:TextBox ID="txtsname" runat="server" Text='<%#Eval("SName")%>'> </asp:TextBox>
                    </ItemTemplate>
                </asp:TemplateField>
                <asp:TemplateField HeaderText="C">
                    <ItemTemplate>
                    <%-- <asp:Label ID="lblc" runat="server" Text='<%#Eval ("C") %>'></asp:Label>--%>
                        <asp:TextBox ID="txtc" runat="server" Text='<%#Eval ("C") %>'></asp:TextBox>
                    </ItemTemplate>
                </asp:TemplateField>
                <asp:TemplateField HeaderText="Cpp">
                    <ItemTemplate>
                    <%-- <asp:Label ID="lblcpp" runat="server" Text='<%#Eval ("Cpp")%>'></asp:Label>--%>
                       <asp:TextBox ID="txtcpp" runat="server" Text='<%#Eval ("Cpp")%>'> </asp:TextBox>
                    </ItemTemplate>
                </asp:TemplateField>
                <asp:TemplateField HeaderText="Java">
                    <ItemTemplate>
                       <%--  <asp:Label ID="lbljava" runat="server" Text='<%#Eval ("Java")%>'> </asp:Label>--%>
                        <asp:TextBox ID="txtjava" runat="server" Text='<%#Eval ("Java")%>'> </asp:TextBox>
                    </ItemTemplate>
                </asp:TemplateField>
                <asp:TemplateField HeaderText="Edit" ShowHeader="False">
                    <EditItemTemplate>
                        <asp:LinkButton ID="lnkbtnUpdate" runat="server" CausesValidation="true" Text="Update"
                            CommandName="Update"></asp:LinkButton>
                        <asp:LinkButton ID="lnkbtnCancel" runat="server" CausesValidation="false" Text="Cancel"
                            CommandName="Cancel"></asp:LinkButton>
                    </EditItemTemplate>
                    <ItemTemplate>
                        <asp:LinkButton ID="btnEdit" runat="server" CausesValidation="false" CommandName="Edit"
                            Text="Edit"></asp:LinkButton>
                    </ItemTemplate>
                </asp:TemplateField>
                <asp:CommandField HeaderText="Delete" ShowDeleteButton="True" ShowHeader="True" />
                <asp:CommandField HeaderText="Select" ShowSelectButton="True" ShowHeader="True" />
            </Columns>
        </asp:GridView>
        <table>
            <tr>
                <td>
                    <asp:Label ID="lblrollno" runat="server" Text="RollNo"></asp:Label>
                    <asp:TextBox ID="txtrollno" runat="server"></asp:TextBox>
                </td>
                <td>
                    <asp:Label ID="lblsname" runat="server" Text="SName"></asp:Label>
                    <asp:TextBox ID="txtsname" runat="server"></asp:TextBox>
                </td>
                <td>
                    <asp:Label ID="lblc" runat="server" Text="C"></asp:Label>
                    <asp:TextBox ID="txtc" runat="server"></asp:TextBox>
                </td>
                <td>
                    <asp:Label ID="lblcpp" runat="server" Text="Cpp"></asp:Label>
                    <asp:TextBox ID="txtcpp" runat="server"></asp:TextBox>
                </td>
                <td>
                    <asp:Label ID="lbljava" runat="server" Text="Java"></asp:Label>
                    <asp:TextBox ID="txtjava" runat="server"></asp:TextBox>
                </td>
            </tr>
            <tr>
                <td>
                    <asp:Button ID="Submit" runat="server" Text="Submit" OnClick="Submit_Click" />
                    <asp:Button ID="Reset" runat="server" Text="Reset" OnClick="Reset_Click" />
                </td>
            </tr>
        </table>

if a device has an SD card, you use:

Environment.getExternalStorageState() 

if you don't have an SD card, you use:

Environment.getDataDirectory()

if there is no SD card, you can create your own directory on the device locally.

    //if there is no SD card, create new directory objects to make directory on device
        if (Environment.getExternalStorageState() == null) {
                        //create new file directory object
            directory = new File(Environment.getDataDirectory()
                    + "/RobotiumTestLog/");
            photoDirectory = new File(Environment.getDataDirectory()
                    + "/Robotium-Screenshots/");
            /*
             * this checks to see if there are any previous test photo files
             * if there are any photos, they are deleted for the sake of
             * memory
             */
            if (photoDirectory.exists()) {
                File[] dirFiles = photoDirectory.listFiles();
                if (dirFiles.length != 0) {
                    for (int ii = 0; ii <= dirFiles.length; ii++) {
                        dirFiles[ii].delete();
                    }
                }
            }
            // if no directory exists, create new directory
            if (!directory.exists()) {
                directory.mkdir();
            }

            // if phone DOES have sd card
        } else if (Environment.getExternalStorageState() != null) {
            // search for directory on SD card
            directory = new File(Environment.getExternalStorageDirectory()
                    + "/RobotiumTestLog/");
            photoDirectory = new File(
                    Environment.getExternalStorageDirectory()
                            + "/Robotium-Screenshots/");
            if (photoDirectory.exists()) {
                File[] dirFiles = photoDirectory.listFiles();
                if (dirFiles.length > 0) {
                    for (int ii = 0; ii < dirFiles.length; ii++) {
                        dirFiles[ii].delete();
                    }
                    dirFiles = null;
                }
            }
            // if no directory exists, create new directory to store test
            // results
            if (!directory.exists()) {
                directory.mkdir();
            }
        }// end of SD card checking

add permissions on your manifest.xml

<uses-permission android:name="android.permission.WRITE_EXTERNAL_STORAGE" />

Happy coding..

Here is another example of subtracting two dates in C# ...

if ( DateTime.Now.Subtract(Convert.ToDateTime(objDateValueFromDatabase.CreatedOn)).TotalHours > 24 ) 
{ 
... 
} 

Make sure you really need to invert the matrix. This is often unnecessary and can be numerically unstable. When most people ask how to invert a matrix, they really want to know how to solve Ax = b where A is a matrix and x and b are vectors. It's more efficient and more accurate to use code that solves the equation Ax = b for x directly than to calculate A inverse then multiply the inverse by B. Even if you need to solve Ax = b for many b values, it's not a good idea to invert A. If you have to solve the system for multiple b values, save the Cholesky factorization of A, but don't invert it.

See Don't invert that matrix.

I use this property for hibernate in config xml

<property name="hibernate.connection.url">
jdbc:mysql://localhost:3306/bookshop?serverTimezone=UTC&amp;useSSL=false
</property>

without - serverTimezone=UTC - it doesn't work

Refresh would probably also make for much more readable code, depending on context.

man wget: -O file --output-document=file

wget "url" -O /tmp/cron_test/<file>

I think $PsHome has the information you're after?

PS .> $PsHome
C:\Windows\System32\WindowsPowerShell\v1.0

PS .> Get-Help about_automatic_variables

TOPIC
    about_Automatic_Variables ...

Here '~' refers to the root directory ,where Home is controller and Download_Excel_File is actionmethod

 <a href="~/Home/Download_Excel_File" />

Did you try passwd -d root? Most likely, this will do what you want.

You can also manually edit /etc/shadow: (Create a backup copy. Be sure that you can log even if you mess up, for example from a rescue system.) Search for "root". Typically, the root entry looks similar to

root:$X$SK5xfLB1ZW:0:0...

There, delete the second field (everything between the first and second colon):

root::0:0...

Some systems will make you put an asterisk (*) in the password field instead of blank, where a blank field would allow no password (CentOS 8 for example)

root:*:0:0...

Save the file, and try logging in as root. It should skip the password prompt. (Like passwd -d, this is a "no password" solution. If you are really looking for a "blank password", that is "ask for a password, but accept if the user just presses Enter", look at the manpage of mkpasswd, and use mkpasswd to create the second field for the /etc/shadow.)

• DataFrame.loc() : Select rows by index value
• DataFrame.iloc() : Select rows by rows number

example :

1. Select first 5 rows of a table, df1 is your dataframe

df1.iloc[:5]

2. Select first A, B rows of a table, df1 is your dataframe

df1.loc['A','B']

Here you are not fitting a normal distribution. Replacing sns.distplot(data) by sns.distplot(data, fit=norm, kde=False) should do the trick.

You can update a Hive partition by, for example:

ALTER TABLE logs PARTITION(year = 2012, month = 12, day = 18) 
SET LOCATION 'hdfs://user/darcy/logs/2012/12/18';

This command does not move the old data, nor does it delete the old data. It simply sets the partition to the new location.

To drop a partition, you can do

ALTER TABLE logs DROP IF EXISTS PARTITION(year = 2012, month = 12, day = 18);

Hope it helps!

As others have written, you can cast null to everything. Normally, you wouldn't need that, you can write:

String nullString = null;

without putting the cast there.

But there are occasions where such casts make sense:

a) if you want to make sure that a specific method is called, like:

void foo(String bar) {  ... }
void foo(Object bar) {  ... }

then it would make a difference if you type

foo((String) null) vs. foo(null)

b) if you intend to use your IDE to generate code; for example I am typically writing unit tests like:

@Test(expected=NullPointerException.class)
public testCtorWithNullWhatever() {
    new MyClassUnderTest((Whatever) null);
}

I am doing TDD; this means that the class "MyClassUnderTest" probably doesn't exist yet. By writing down that code, I can then use my IDE to first generate the new class; and to then generate a constructor accepting a "Whatever" argument "out of the box" - the IDE can figure from my test that the constructor should take exactly one argument of type Whatever.

For those who can not figure out this in instructions from this answer there:

Try to set padding value more then 0, if child divs have margin-top or margin-bottom you can replace it with padding

For example if you have

#childRightCol
{
    margin-top: 30px;
}
#childLeftCol
{
    margin-bottom: 20px;
}

it'll be better to replace it with:

#parent
{
    padding: 30px 0px 20px 0px;
}

Not sure its faster with VBA - the fastest way to do it in the normal Excel programm would be:

1. Ctrl-G
2. A1:X50 Enter
3. Delete

Unless you have to do this very often, entering and then triggering the VBAcode is more effort.

And in case you only want to delete formulas or values, you can insert Ctrl-G, Alt-S to select Goto Special and here select Formulas or Values.

You can use a turn-around and just deploy the application into tomcat server: just copy/paste under the webapps folder. Once tomcat is started, it will create a folder with the app name and you can access the contents directly

The most easy to build, easy to use implementation I have found is made by theguardianproject team: https://github.com/guardianproject/android-ffmpeg

The simple solution is to just remap coordinates from the original to the final image, copying pixels from one coordinate space to the other, rounding off as necessary -- which may result in some pixels being copied several times adjacent to each other, and other pixels being skipped, depending on whether you're stretching or shrinking (or both) in either dimension. Make sure your copying iterates through the destination space, so all pixels are covered there even if they're painted more than once, rather than thru the source which may skip pixels in the output.

The better solution involves calculating the corresponding source coordinate without rounding, and then using its fractional position between pixels to compute an appropriate average of the (typically) four pixels surrounding that location. This is essentially a filtering operation, so you lose some resolution -- but the result looks a LOT better to the human eye; it does a much better job of retaining small details and avoids creating straight-line artifacts which humans find objectionable.

Note that the same basic approach can be used to remap flat images onto any other shape, including 3D surface mapping.

Java 8 way:

You can use computeIfPresent method and supply it a mapping function, which will be called to compute a new value based on existing one.

For example,

Map<String, Integer> words = new HashMap<>();
words.put("hello", 3);
words.put("world", 4);
words.computeIfPresent("hello", (k, v) -> v + 1);
System.out.println(words.get("hello"));

Alternatevely, you could use merge method, where 1 is the default value and function increments existing value by 1:

words.merge("hello", 1, Integer::sum);

In addition, there is a bunch of other useful methods, such as putIfAbsent, getOrDefault, forEach, etc.

@jjnguy's answer is correct in most circumstances. You won't ever see a null String in the argument array (or a null array) if main is called by running the application is run from the command line in the normal way.

However, if some other part of the application calls a main method, it is conceivable that it might pass a null argument or null argument array.

However(2), this is clearly a highly unusual use-case, and it is an egregious violation of the implied contract for a main entry-point method. Therefore, I don't think you should bother checking for null argument values in main. In the unlikely event that they do occur, it is acceptable for the calling code to get a NullPointerException. After all, it is a bug in the caller to violate the contract.

Try the following

Dictionary<int, DateTime> existingItems = 
    (from ObjType ot in TableObj).ToDictionary(x => x.Key);

Or the fully fledged type inferenced version

var existingItems = TableObj.ToDictionary(x => x.Key);

It depends on the format you want the date to be shown as.

Static date format

If you want to display a static format, which is the same for all locales (for instance ISO 8601 for an Atom feed), you should use Twig's date filter:

{{ game.gameDate|date('Y-m-d\\TH:i:sP') }}

Which will allways return a datetime in the following format:

2014-05-02T08:55:41Z

The format strings accepted by the date filter are the same as you would use for PHP's date() function. (the only difference is that, as far as I know, you can't use the predefined constants which can be used in the PHP date() function)

Localized dates (and times)

However, since you want to render it in the browser, you'll likely want to show it in a human-readable format, localised for the user's language and location. Instead of doing the localization yourself, you can use the Intl Extension for this (which makes use of PHP's IntlDateFormatter). It provides a filter localizeddate which will output the date and time using a localized format.

localizeddate( date_format, time_format [, locale ] )

Arguments for localizeddate:

• date_format: One of the format strings (see below)
• time_format: One of the format strings (see below)
• locale: (optional) Use this to override the configured locale. Leave this argument out to use the default locale, which can be configured in Symfony's configuration.

(there are more, see the docs for the complete list of possible arguments)

For date_format and time_format you can use one of the following strings:

• 'none' if you don't want to include this element
• 'short' for the most abbreviated style (12/13/52 or 3:30pm in an English locale)
• 'medium' for the medium style (Jan 12, 1952 in an English locale)
• 'long' for the long style (January 12, 1952 or 3:30:32pm in an English locale)
• 'full' for the completely specified style (Tuesday, April 12, 1952 AD or 3:30:42pm PST in an English locale)

Example

So, for instance, if you want to display the date in a format equivalent to February 6, 2014 at 10:52 AM, use the following line in your Twig template:

{{ game.gameDate|localizeddate('long', 'short') }}

However, if you use a different locale, the result will be localized for that locale:

• 6 februari 2014 10:52 for the nl locale;
• 6 février 2014 10:52 for the fr locale;
• 6. Februar 2014 10:52 for the de locale; etc.

As you can see, localizeddate does not only translate the month names but also uses the local notations. The English notation puts the date after the month, where Dutch, French and German notations put it before the month. English and German month names start with an uppercase letter, whereas Dutch and French month names are lowercase. And German dates have a dot appended.

Installation / setting the locale

Installation instructions for the Intl extension can be found in this seperate answer.

Here is a more general Dictionary implementation inspired by this from @dmck

    interface IDictionary<T> {
      add(key: string, value: T): void;
      remove(key: string): void;
      containsKey(key: string): boolean;
      keys(): string[];
      values(): T[];
    }

    class Dictionary<T> implements IDictionary<T> {

      _keys: string[] = [];
      _values: T[] = [];

      constructor(init?: { key: string; value: T; }[]) {
        if (init) {
          for (var x = 0; x < init.length; x++) {
            this[init[x].key] = init[x].value;
            this._keys.push(init[x].key);
            this._values.push(init[x].value);
          }
        }
      }

      add(key: string, value: T) {
        this[key] = value;
        this._keys.push(key);
        this._values.push(value);
      }

      remove(key: string) {
        var index = this._keys.indexOf(key, 0);
        this._keys.splice(index, 1);
        this._values.splice(index, 1);

        delete this[key];
      }

      keys(): string[] {
        return this._keys;
      }

      values(): T[] {
        return this._values;
      }

      containsKey(key: string) {
        if (typeof this[key] === "undefined") {
          return false;
        }

        return true;
      }

      toLookup(): IDictionary<T> {
        return this;
      }
    }

Since you mentioned reflection in your question;

boolean isArray = myArray.getClass().isArray();
boolean isCollection = Collection.class.isAssignableFrom(myList.getClass());
boolean isMap = Map.class.isAssignableFrom(myMap.getClass());

I believe this would also work:

select count(distinct switch_id)   
  from [email protected]  
 where 
   dealer_name =  'XXXX'    
   and (creation_date BETWEEN add_months(trunc(sysdate,'mm'),-1) and  trunc(sysdate, 'mm'))

It has the advantage of using BETWEEN which is the way the OP used his date selection criteria.

Use DATE(NOW()) to compare dates

DATE(NOW()) will give you the date part of current date and DATE(duedate) will give you the date part of the due date. then you can easily compare the dates

So you can compare it like

DATE(NOW()) = DATE(duedate)

OR

DATE(duedate) = CURDATE() 

See here

NomeN has answered correctly, but this answer wouldn't be of much use for beginners like me because we will have another problem to solve and we wouldn't know how to use RegEx in there. So I am adding a bit of explanation to this. The answer is

search: (\w+\\.someMethod\\(\\))

replace: ((TypeName)$1)

Here:

In search:

• First and last (, ) depicts a group in regex

• \w depicts words (alphanumeric + underscore)

• + depicts one or more (ie one or more of alphanumeric + underscore)

• . is a special character which depicts any character (ie .+ means one or more of any character). Because this is a special character to depict a . we should give an escape character with it, ie \.

• someMethod is given as it is to be searched.

• The two parenthesis (, ) are given along with escape character because they are special character which are used to depict a group (we will discuss about group in next point)

In replace:

• It is given ((TypeName)$1), here $1 depicts the group. That is all the characters that are enclosed within the first and last parenthesis (, ) in the search field

• Also make sure you have checked the 'Regular expression' option in find an replace box

you can get distance and time using google Map API Google Map API

just pass downloaded JSON to this method you will get real time Distance and Time between two latlong's

void parseJSONForDurationAndKMS(String json) throws JSONException {

    Log.d(TAG, "called parseJSONForDurationAndKMS");
    JSONObject jsonObject = new JSONObject(json);
    String distance;
    String duration;
    distance = jsonObject.getJSONArray("routes").getJSONObject(0).getJSONArray("legs").getJSONObject(0).getJSONObject("distance").getString("text");
    duration = jsonObject.getJSONArray("routes").getJSONObject(0).getJSONArray("legs").getJSONObject(0).getJSONObject("duration").getString("text");

    Log.d(TAG, "distance : " + distance);
    Log.d(TAG, "duration : " + duration);

    distanceBWLats.setText("Distance : " + distance + "\n" + "Duration : " + duration);


}

I found a short cut rather than going through vs code appData/webCompiler, I added it as a dependency to my project with this cmd npm i caniuse-lite browserslist. But you might install it globally to avoid adding it to each project.

After installation, you could remove it from your project package.json and do npm i.

Update:

In case, Above solution didn't fix it. You could run npm update, as this would upgrade deprecated/outdated packages.

Note:

After you've run the npm update, there may be missing dependencies. Trace the error and install the missing dependencies. Mine was nodemon, which I fix by npm i nodemon -g

dat <- data.frame(x1 = c(1,2,3, NA, 5), x2 = c(100, NA, 300, 400, 500))

na.omit(dat)
  x1  x2
1  1 100
3  3 300
5  5 500

To properly answer this qustion you need to consider PHP internals or the target that PHP is built for.

To answer this from a typical Linux perspective on x86...

Sizes of types in C: https://usrmisc.wordpress.com/2012/12/27/integer-sizes-in-c-on-32-bit-and-64-bit-linux/

Types used in PHP for variables: http://php.net/manual/en/internals2.variables.intro.php

Strings are always 2GB as the length is always 32bits and a bit is wasted because it uses int rather than uint. int is impractical for lengths over 2GB as it requires a cast to avoid breaking arithmetic or "than" comparisons. The extra bit is likely being used for overflow checks.

Strangely, hash keys might internally support 4GB as uint is used although I have never put this to the test. PHP hash keys have a +1 to the length for a trailing null byte which to my knowledge gets ignored so it may need to be unsigned for that edge case rather than to allow longer keys.

A 32bit system may impose more external limits.

check this Twig Reference.

You can do it that simple:

{% if (a or b) %}
    ...
{% endif %}

Try this:

String status = "The status of my combobox is " + comboBoxTest.text;

In this case , this code

{<td><span onClick={this.toggle()}>Details</span></td>}

causes toggle function to call immediately and re render it again and again thus making infinite calls.

so passing only the reference to that toggle method will solve the problem.

so ,

{<td><span onClick={this.toggle}>Details</span></td>}

will be the solution code.

If you want to use the () , you should use an arrow function like this

{<td><span onClick={()=> this.toggle()}>Details</span></td>}

In case you want to pass parameters you should choose the last option and you can pass parameters like this

{<td><span onClick={(arg)=>this.toggle(arg)}>Details</span></td>}

In the last case it doesn't call immediately and don't cause the re render of the function, hence avoiding infinite calls.

^{Note: This is an updated answer. Comments below refer to an old version which messed around with keycodes.}

JavaScript

Try it yourself on JSFiddle.

You can filter the input values of a text <input> with the following setInputFilter function (supports Copy+Paste, Drag+Drop, keyboard shortcuts, context menu operations, non-typeable keys, the caret position, different keyboard layouts, and all browsers since IE 9):

// Restricts input for the given textbox to the given inputFilter function.
function setInputFilter(textbox, inputFilter) {
  ["input", "keydown", "keyup", "mousedown", "mouseup", "select", "contextmenu", "drop"].forEach(function(event) {
    textbox.addEventListener(event, function() {
      if (inputFilter(this.value)) {
        this.oldValue = this.value;
        this.oldSelectionStart = this.selectionStart;
        this.oldSelectionEnd = this.selectionEnd;
      } else if (this.hasOwnProperty("oldValue")) {
        this.value = this.oldValue;
        this.setSelectionRange(this.oldSelectionStart, this.oldSelectionEnd);
      } else {
        this.value = "";
      }
    });
  });
}

You can now use the setInputFilter function to install an input filter:

setInputFilter(document.getElementById("myTextBox"), function(value) {
  return /^\d*\.?\d*$/.test(value); // Allow digits and '.' only, using a RegExp
});

See the JSFiddle demo for more input filter examples. Also note that you still must do server side validation!

TypeScript

Here is a TypeScript version of this.

function setInputFilter(textbox: Element, inputFilter: (value: string) => boolean): void {
    ["input", "keydown", "keyup", "mousedown", "mouseup", "select", "contextmenu", "drop"].forEach(function(event) {
        textbox.addEventListener(event, function(this: (HTMLInputElement | HTMLTextAreaElement) & {oldValue: string; oldSelectionStart: number | null, oldSelectionEnd: number | null}) {
            if (inputFilter(this.value)) {
                this.oldValue = this.value;
                this.oldSelectionStart = this.selectionStart;
                this.oldSelectionEnd = this.selectionEnd;
            } else if (Object.prototype.hasOwnProperty.call(this, 'oldValue')) {
                this.value = this.oldValue;
                if (this.oldSelectionStart !== null &&
                    this.oldSelectionEnd !== null) {
                    this.setSelectionRange(this.oldSelectionStart, this.oldSelectionEnd);
                }
            } else {
                this.value = "";
            }
        });
    });
}

jQuery

There is also a jQuery version of this. See this answer.

HTML 5

HTML 5 has a native solution with <input type="number"> (see the specification), but note that browser support varies:

• Most browsers will only validate the input when submitting the form, and not when typing.
• Most mobile browsers don't support the step, min and max attributes.
• Chrome (version 71.0.3578.98) still allows the user to enter the characters e and E into the field. Also see this question.
• Firefox (version 64.0) and Edge (EdgeHTML version 17.17134) still allow the user to enter any text into the field.

Try it yourself on w3schools.com.

If you're using guava (and you should be, see effective java item #15):

ImmutableList<String> list = ImmutableList.copyOf(s.split(","));

//catch volume update
var volEvents = "change,input";
var volEventsArr = volEvents.split(",");
for(var i = 0;i<volknob.length;i++) {
    for(var k=0;k<volEventsArr.length;k++) {
    volknob[i].addEventListener(volEventsArr[k], function() {
        var cfa = document.getElementsByClassName('watch_televised');
        for (var j = 0; j<cfa.length; j++) {
            cfa[j].volume = this.value / 100;
        }
    });
}
}

using meta refresh in html

<meta http-equiv='refresh' content='1'>

using meta refresh in php

echo "<meta http-equiv='refresh' content='1'>"

Make sure, that all of your class methods (updateVelocity, updatePosition, ...) take at least one positional argument, which is canonically named self and refers to the current instance of the class.

When you call particle.updateVelocity(), the called method implicitly gets an argument: the instance, here particle as first parameter.

With Chart.js V2.0 you can to do the following:

websiteChart.config.data = some_new_data;
websiteChart.update();

For percise time measurements (like GetTickCount), also take a look at mach_absolute_time and this Apple Q&A: http://developer.apple.com/qa/qa2004/qa1398.html.

Are the items in the vector unique? If so, copy the vector, sort one of the copies with STL Sort then you can find which index each item had in the original vector.

If the vector is supposed to handle duplicate items, I think youre better of implementing your own sort routine.

One more example of a function to do this: (changing the time and interval formats however you like them according to this for function.date, and this for DateInterval):

(I've also written an alternate form of the below function.)

// Return adjusted time.

function addMinutesToTime( $dateTime, $plusMinutes ) {

    $dateTime = DateTime::createFromFormat( 'Y-m-d H:i', $dateTime );
    $dateTime->add( new DateInterval( 'PT' . ( (integer) $plusMinutes ) . 'M' ) );
    $newTime = $dateTime->format( 'Y-m-d H:i' );

    return $newTime;
}

$adjustedTime = addMinutesToTime( '2011-11-17 05:05', 59 );

echo '<h1>Adjusted Time: ' . $adjustedTime . '</h1>' . PHP_EOL . PHP_EOL;

There isn't a last() or first() method in a Collection interface. For getting the last method, you can either do get(size() - 1) on a List or reverse the List and do get(0). I don't see a need to have last() method in any Collection API unless you are dealing with Stacks or Queues

?you should do these steps :

1. the mother Element should be positioned(for EXP you can give it position:relative;)
2. the child Element should have positioned "Absolute" and values should set like this: top:0;buttom:0;right:0;left:0; (to be middle vertically)
3. for the child Element you should set "margin : auto" (to be middle vertically)
4. the child and mother Element should have "height"and"width" value
5. for mother Element => text-align:center (to be middle horizontally)

??simply here is the summery of those 5 steps:

.mother_Element {
    position : relative;
    height : 20%;
    width : 5%;
    text-align : center
    }
.child_Element {
    height : 1.2 em;
    width : 5%;
    margin : auto;
    position : absolute;
    top:0;
    bottom:0;
    left:0;
    right:0;
    }

I edited CrimsonX's code as it was not working with superclass types:

public static T FindChild<T>(DependencyObject depObj, string childName)
   where T : DependencyObject
{
    // Confirm obj is valid. 
    if (depObj == null) return null;

    // success case
    if (depObj is T && ((FrameworkElement)depObj).Name == childName)
        return depObj as T;

    for (int i = 0; i < VisualTreeHelper.GetChildrenCount(depObj); i++)
    {
        DependencyObject child = VisualTreeHelper.GetChild(depObj, i);

        //DFS
        T obj = FindChild<T>(child, childName);

        if (obj != null)
            return obj;
    }

    return null;
}

there is no need to set git ssl verification to set to false. It is caused when the system does not have the all CA authority certificates. Mostly people who have genuine SSL certificate missing the intermediate certificate.

Just adding the complete text of intermediate certificate (whole chain of missing CA and intermediate certificate) to

sudo gedit /etc/ssl/certs/ca-certificates.crt 

works without running the update-ca-certificates.

Same goes for manually generated certificates, just add the CA certificate text.

At the end : Push successful: Everything is up-to-date

put the following in the site's .htaccess file (in the /var/www/XXX):

Header set Access-Control-Allow-Origin "*"

instead of the .conf file.

You'll also want to use

AllowOverride All

in your .conf file for the domain so Apache looks at it.

1. Set var step=1 as global variable by putting it above the function call
2. put semicolons

It will look like this

<head>
<script type="text/javascript">
var image1 = new Image()
image1.src = "images/pentagg.jpg"
var image2 = new Image()
image2.src = "images/promo.jpg"
</script>
</head>
<body>
<p><img src="images/pentagg.jpg" width="500" height="300" name="slide" /></p>
<script type="text/javascript">
        var step=1;
        function slideit()
        {
            document.images.slide.src = eval("image"+step+".src");
            if(step<2)
                step++;
            else
                step=1;
            setTimeout("slideit()",2500);
        }
        slideit();
</script>
</body>

One of #a or #b needs to be not position:absolute, so that #box will grow to accommodate it.

So you can stop #a from being position:absolute, and still position #b over the top of it, like this:

 #box {_x000D_
        background-color: #000;_x000D_
        position: relative;     _x000D_
        padding: 10px;_x000D_
        width: 220px;_x000D_
    }_x000D_
    _x000D_
    .a {_x000D_
        width: 210px;_x000D_
        background-color: #fff;_x000D_
        padding: 5px;_x000D_
    }_x000D_
    _x000D_
    .b {_x000D_
        width: 100px; /* So you can see the other one */_x000D_
        position: absolute;_x000D_
        top: 10px; left: 10px;_x000D_
        background-color: red;_x000D_
        padding: 5px;_x000D_
    }_x000D_
    _x000D_
    #after {_x000D_
        background-color: yellow;_x000D_
        padding: 10px;_x000D_
        width: 220px;_x000D_
    }

    <div id="box">_x000D_
        <div class="a">Lorem</div>_x000D_
        <div class="b">Lorem</div>_x000D_
    </div>_x000D_
    <div id="after">Hello world</div>

(Note that I've made the widths different, so you can see one behind the other.)

Edit after Justine's comment: Then your only option is to specify the height of #box. This:

#box {
    /* ... */
    height: 30px;
}

works perfectly, assuming the heights of a and b are fixed. Note that you'll need to put IE into standards mode by adding a doctype at the top of your HTML

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN"
          "http://www.w3.org/TR/html4/strict.dtd">

before that works properly.

You cant do it on shared hosting , Add ticket to support of hosting for same ( otherwise you can look for dedicated server where you can manage anything )

As eaon21 and monkey said, source map files basically turn minified code into its unminified version for debugging.

You can find the .map files here. Just add them into the same directory as the minified js files and it'll stop complaining. The reason they get fetched is the

/*
//@ sourceMappingURL=angular.min.js.map
*/

at the end of angular.min.js. If you don't want to add the .map files you can remove those lines and it'll stop the fetch attempt, but if you plan on debugging it's always good to keep the source maps linked.

From MSDN:

Use of two sequential underscore characters ( __ ) at the beginning of an identifier, or a single leading underscore followed by a capital letter, is reserved for C++ implementations in all scopes. You should avoid using one leading underscore followed by a lowercase letter for names with file scope because of possible conflicts with current or future reserved identifiers.

This means that you can use a single underscore as a member variable prefix, as long as it's followed by a lower-case letter.

This is apparently taken from section 17.4.3.1.2 of the C++ standard, but I can't find an original source for the full standard online.

See also this question.

Using YYYY-MM-DD hh:mm:ss format :

var date = new Date('2011-06-29T16:52:48+00:00');
date.toString() // "Wed Jun 29 2011 09:52:48 GMT-0700 (PDT)"

For converting from the YYYY-MM-DD hh:mm:ss format, make sure your date follow the ISO 8601 format.

Year: 
    YYYY (eg 1997)    
Year and month: 
    YYYY-MM (eg 1997-07)
Complete date: 
    YYYY-MM-DD (eg 1997-07-16)
Complete date plus hours and minutes:
    YYYY-MM-DDThh:mmTZD (eg 1997-07-16T19:20+01:00)    
Complete date plus   hours, minutes and seconds:
    YYYY-MM-DDThh:mm:ssTZD (eg 1997-07-16T19:20:30+01:00)    
Complete date plus hours, minutes, seconds and a decimal fraction of a second
    YYYY-MM-DDThh:mm:ss.sTZD (eg 1997-07-16T19:20:30.45+01:00) where:

YYYY = four-digit year
MM   = two-digit month (01=January, etc.)
DD   = two-digit day of month (01 through 31)
hh   = two digits of hour (00 through 23) (am/pm NOT allowed)
mm   = two digits of minute (00 through 59)
ss   = two digits of second (00 through 59)
s    = one or more digits representing a decimal fraction of a second
TZD  = time zone designator (Z or +hh:mm or -hh:mm)

Important things to note

1. You must separate the date and the time by a T, a space will not work in some browsers
2. You must set the timezone using this format +hh:mm, using a string for a timezone (ex. : 'UTC') will not work in many browsers. +hh:mm represent the offset from the UTC timezone.

Your error is in UpdaterServiceManager in onCreate and showNotification method.

You are trying to show notification from Service using Activity Context. Whereas Every Service has its own Context, just use the that. You don't need to pass a Service an Activity's Context.I don't see why you need a specific Activity's Context to show Notification.

Put your createNotification method in UpdateServiceManager.class. And remove CreateNotificationActivity not from Service.

You cannot display an application window/dialog through a Context that is not an Activity. Try passing a valid activity reference

Even if you do not have the pid, you can trigger 'wait;' after triggering all background processes. For. eg. in commandfile.sh-

bteq < input_file1.sql > output_file1.sql &
bteq < input_file2.sql > output_file2.sql &
bteq < input_file3.sql > output_file3.sql &
wait

Then when this is triggered, as -

subprocess.call(['sh', 'commandfile.sh'])
print('all background processes done.')

This will be printed only after all the background processes are done.

1. What is the difference between Git and GitHub?

   Linus Torvalds would kill you for this. Git is the name of the version manager program he wrote. GitHub is a website on which there are source code repositories manageable by Git. Thus, GitHub is completely unrelated to the original Git tool.

2. Is git saving every repository locally (in the user's machine) and in GitHub?

   If you commit changes, it stores locally. Then, if you push the commits, it also sotres them remotely.

3. Can you use Git without GitHub? If yes, what would be the benefit for using GitHub?

   You can, but I'm sure you don't want to manually set up a git server for yourself. Benefits of GitHub? Well, easy to use, lot of people know it so others may find your code and follow/fork it to make improvements as well.

4. How does Git compare to a backup system such as Time Machine?

   Git is specifically designed and optimized for source code.

5. Is this a manual process, in other words if you don't commit you wont have a new version of the changes made?

   Exactly.

6. If are not collaborating and you are already using a backup system why would you use Git?

   See #4.

JButton#isEnabled changes the user interactivity of a component, that is, whether a user is able to interact with it (press it) or not.

When a JButton is pressed, it fires a actionPerformed event.

You are receiving Add button is pressed when you press the confirm button because the add button is enabled. As stated, it has nothing to do with the pressed start of the button.

Based on you code, if you tried to check the "pressed" start of the add button within the confirm button's ActionListener it would always be false, as the button will only be in the pressed state while the add button's ActionListeners are being called.

Based on all this information, I would suggest you might want to consider using a JCheckBox which you can then use JCheckBox#isSelected to determine if it has being checked or not.

Take a closer look at How to Use Buttons for more details

This is a small tweak on the other answers. If you have nested divs you can include more exciting content such as H1s in your popup.

CSS

div.appear {
    width: 250px; 
    border: #000 2px solid;
    background:#F8F8F8;
    position: relative;
    top: 5px;
    left:15px;
    display:none;
    padding: 0 20px 20px 20px;
    z-index: 1000000;
}
div.hover  {
    cursor:pointer;
    width: 5px;
}
div.hover:hover div.appear {
    display:block;
}

HTML

<div class="hover">
<img src="questionmark.png"/>
    <div class="appear">
       <h1>My popup</h1>Hitherto and whenceforth.
    </div>
</div>

The problem with these solutions is that everything after this in the page gets shifted when the popup is displayed, ie, the rest of the page jumps downwards to 'make space'. The only way I could fix this was by making position:absolute and removing the top and left CSS tags.