After modifying the References in the Web.config file as mentioned above, we resolved the references.

I was facing similar issue.

For us we have reference Microsoft.Data.Edm.dll and OData.dll and other assemblies from Program Files:

C:\Program Files (x86)\Microsoft WCF Data Services\5.0
                          \bin\.NETFramework\Microsoft.Data.Edm.dll

and

C:\Program Files (x86)\Microsoft WCF Data Services\5.0
                        \bin\.NETFramework\Microsoft.Data.OData.dll

and version was 5.6.4.

Once I change the reference of both assemblies to C:\....Project\packages\Microsoft.Data.Edm.5.6.0 , the issue was resolved

Just insert $this->load->database(); in your model:

function order_summary_insert($data){
    $this->load->database();
    $this->db->insert('Customer_Orders',$data);
}

Add bellow line in build.gradle:

compile 'com.commit451:PhotoView:1.2.4'

or

compile 'com.github.chrisbanes:PhotoView:1.3.0'

In Java file:

PhotoViewAttacher photoAttacher;
photoAttacher= new PhotoViewAttacher(Your_Image_View);
photoAttacher.update();

Here's a solution that I've come up with. I paired up the LocationStrategy with the Router events. Using the LocationStrategy to set a boolean to know when a user's currently traversing through the browser history. This way, I don't have to store a bunch of URL and y-scroll data (which doesn't work well anyway, since each data is replaced based on URL). This also solves the edge case when a user decides to hold the back or forward button on a browser and goes back or forward multiple pages rather than just one.

P.S. I've only tested on the latest version of IE, Chrome, FireFox, Safari, and Opera (as of this post).

Hope this helps.

export class AppComponent implements OnInit {
  isPopState = false;

  constructor(private router: Router, private locStrat: LocationStrategy) { }

  ngOnInit(): void {
    this.locStrat.onPopState(() => {
      this.isPopState = true;
    });

    this.router.events.subscribe(event => {
      // Scroll to top if accessing a page, not via browser history stack
      if (event instanceof NavigationEnd && !this.isPopState) {
        window.scrollTo(0, 0);
        this.isPopState = false;
      }

      // Ensures that isPopState is reset
      if (event instanceof NavigationEnd) {
        this.isPopState = false;
      }
    });
  }
}

In reply to Dimitrys answer but using Ajax.BeginForm the following works at least with MVC >5 (4 not tested).

1. write a model as shown in the other answers,

2. In the "parent view" you will probably use a table to show the data. Model should be an ienumerable. I assume, the model has an id-property. Howeverm below the template, a placeholder for the modal and corresponding javascript

   <table>
   @foreach (var item in Model)
   {
       <tr> <td id="[email protected]"> 
           @Html.Partial("dataRowView", item)
       </td> </tr>
   }
   </table>
   
   <div class="modal fade" id="editor-container" tabindex="-1" 
        role="dialog" aria-labelledby="editor-title">
       <div class="modal-dialog modal-lg" role="document">
           <div class="modal-content" id="editor-content-container"></div>
       </div>
   </div> 
   
   <script type="text/javascript">
       $(function () {
           $('.editor-container').click(function () {
               var url = "/area/controller/MyEditAction";  
               var id = $(this).attr('data-id');  
               $.get(url + '/' + id, function (data) {
                   $('#editor-content-container').html(data);
                   $('#editor-container').modal('show');
               });
           });
       });
   
       function success(data,status,xhr) {
           $('#editor-container').modal('hide');
           $('#editor-content-container').html("");
       }
   
       function failure(xhr,status,error) {
           $('#editor-content-container').html(xhr.responseText);
           $('#editor-container').modal('show');
       }
   </script>
   

note the "editor-success-id" in data table rows.

3. The dataRowView is a partial containing the presentation of an model's item.

   @model ModelView
   @{
       var item = Model;
   }
   <div class="row">
           // some data 
           <button type="button" class="btn btn-danger editor-container" data-id="@item.Id">Edit</button>
   </div>
   

4. Write the partial view that is called by clicking on row's button (via JS $('.editor-container').click(function () ... ).

   @model Model
   <div class="modal-header">
       <button type="button" class="close" data-dismiss="modal" aria-label="Close">
           <span aria-hidden="true">&times;</span>
       </button>
       <h4 class="modal-title" id="editor-title">Title</h4>
   </div>
   @using (Ajax.BeginForm("MyEditAction", "Controller", FormMethod.Post,
                       new AjaxOptions
                       {
                           InsertionMode = InsertionMode.Replace,
                           HttpMethod = "POST",
                           UpdateTargetId = "editor-success-" + @Model.Id,
                           OnSuccess = "success",
                           OnFailure = "failure",
                       }))
   {
       @Html.ValidationSummary()
       @Html.AntiForgeryToken()
       @Html.HiddenFor(model => model.Id)
       <div class="modal-body">
           <div class="form-horizontal">
               // Models input fields
           </div>
       </div>
       <div class="modal-footer">
           <button type="button" class="btn btn-default" data-dismiss="modal">Cancel</button>
           <button type="submit" class="btn btn-primary">Save</button>
       </div>
   }
   

This is where magic happens: in AjaxOptions, UpdateTargetId will replace the data row after editing, onfailure and onsuccess will control the modal.

This is, the modal will only close when editing was successful and there have been no errors, otherwise the modal will be displayed after the ajax-posting to display error messages, e.g. the validation summary.

But how to get ajaxform to know if there is an error? This is the controller part, just change response.statuscode as below in step 5:

5. the corresponding controller action method for the partial edit modal

   [HttpGet]
   public async Task<ActionResult> EditPartData(Guid? id)
   {
       // Find the data row and return the edit form
       Model input = await db.Models.FindAsync(id);
       return PartialView("EditModel", input);
   }
   
   [HttpPost, ValidateAntiForgeryToken]
   public async Task<ActionResult> MyEditAction([Bind(Include =
      "Id,Fields,...")] ModelView input)
   {
       if (TryValidateModel(input))
       {  
           // save changes, return new data row  
           // status code is something in 200-range
           db.Entry(input).State = EntityState.Modified;
           await db.SaveChangesAsync();
           return PartialView("dataRowView", (ModelView)input);
       }
   
       // set the "error status code" that will redisplay the modal
       Response.StatusCode = 400;
       // and return the edit form, that will be displayed as a 
       // modal again - including the modelstate errors!
       return PartialView("EditModel", (Model)input);
   }
   

This way, if an error occurs while editing Model data in a modal window, the error will be displayed in the modal with validationsummary methods of MVC; but if changes were committed successfully, the modified data table will be displayed and the modal window disappears.

Note: you get ajaxoptions working, you need to tell your bundles configuration to bind jquery.unobtrusive-ajax.js (may be installed by NuGet):

        bundles.Add(new ScriptBundle("~/bundles/jqueryajax").Include(
                    "~/Scripts/jquery.unobtrusive-ajax.js"));

Ctrl+Shift+F formats the selected line(s) or the whole source code if you haven't selected any line(s) as per the formatter specified in your Eclipse, while Ctrl+I gives proper indent to the selected line(s) or the current line if you haven't selected any line(s).

Regarding tokens carrying information, JSON Web Tokens (http://jwt.io) is a brilliant technology. The main concept is to embed information elements (claims) into the token, and then signing the whole token so that the validating end can verify that the claims are indeed trustworthy.

I use this Java implementation: https://bitbucket.org/b_c/jose4j/wiki/Home

There is also a Spring module (spring-security-jwt), but I haven't looked into what it supports.

If the WAMP icon is Orange then one of the services has not started.

In your case it looks like MySQL has not started as you are getting the message that indicates there is no server running and therefore listening for requests.

Look at the mysql log and if that tells you nothing look at the Windows event log, in the Windows -> Applications section. Error messages in there are pretty good at identifying the cause of MySQL failing to start.

Sometimes this is caused by a my.ini file from another install being picked up by WAMPServers MySQL, normally in the \windows or \windows\system32 folders. Do a search for 'my.ini' and 'my.cnf' and if you find one of these anywhere outside of the \wamp.... folder structure then delete it, or at least rename it so it wont be found. Then restart the MySQL service.

The initial post mentioned buttons. You can also replace the input tags with buttons.

<button type="submit" name="product" value="Tea">Tea</button>
<button type="submit" name="product" value="Coffee">Coffee</button>

The name and value attributes are required to submit the value when the form is submitted (the id attribute is not necessary in this case). The attribute type=submit specifies that clicking on this button causes the form to be submitted.

When the server is handling the submitted form, $_POST['product'] will contain the value "Tea" or "Coffee" depending on which button was clicked.

If you want you can also require the user to confirm before submitting the form (useful when you are implementing a delete button for example).

<button type="submit" name="product" value="Tea" onclick="return confirm('Are you sure you want tea?');">Tea</button>
<button type="submit" name="product" value="Coffee" onclick="return confirm('Are you sure you want coffee?');">Coffee</button>

Use the -J compression option for xz. And remember to man tar :)

tar cfJ <archive.tar.xz> <files>

Edit 2015-08-10:

If you're passing the arguments to tar with dashes (ex: tar -cf as opposed to tar cf), then the -f option must come last, since it specifies the filename (thanks to @A-B-B for pointing that out!). In that case, the command looks like:

tar -cJf <archive.tar.xz> <files>

Native JSON support has been included in PHP since 5.2 in the form of methods json_encode() and json_decode(). You would use the first to output a PHP variable in JSON.

many answers above, i will try a different way:

if you are looking for bitwise operations use only one of the marks like:

3 & 1 //==1 - and 4 | 1 //==5 - or

In lieu of a python goto equivalent I use the break statement in the following fashion for quick tests of my code. This assumes you have structured code base. The test variable is initialized at the start of your function and I just move the "If test: break" block to the end of the nested if-then block or loop I want to test, modifying the return variable at the end of the code to reflect the block or loop variable I'm testing.

def x:
  test = True
  If y:
     # some code
     If test:
            break
  return something

There is pre-mentioned OperationId in your query which should not be there as it is auto increamented

Insert table(OperationID,OpDescription,FilterID)
values (20,'Hierachy Update',1)

so your query will be

Insert table(OpDescription,FilterID)
values ('Hierachy Update',1)

Or you can use like this. This may be faster.

int iFindNo = 14;
int j = dataGridView1.Rows.Count-1;
int iRowIndex = -1;
for (int i = 0; i < Convert.ToInt32(dataGridView1.Rows.Count/2) +1; i++)
{
    if (Convert.ToInt32(dataGridView1.Rows[i].Cells[0].Value) == iFindNo)
    {
        iRowIndex = i;
        break;
    }
    if (Convert.ToInt32(dataGridView1.Rows[j].Cells[0].Value) == iFindNo)
    {
        iRowIndex = j;
        break;
    }
    j--;
}
if (iRowIndex != -1)
    MessageBox.Show("Index is " + iRowIndex.ToString());
else
    MessageBox.Show("Index not found." );

Simple but it does work:

printf "%-50s%s\n" "$PROC_NAME~" "~[$STATUS]" | tr ' ~' '- '

Example of usage:

while read PROC_NAME STATUS; do  
    printf "%-50s%s\n" "$PROC_NAME~" "~[$STATUS]" | tr ' ~' '- '
done << EOT 
JBoss DOWN
GlassFish UP
VeryLongProcessName UP
EOT

Output to stdout:

JBoss -------------------------------------------- [DOWN]
GlassFish ---------------------------------------- [UP]
VeryLongProcessName ------------------------------ [UP]

Use std::greater as the comparison function:

std::priority_queue<int, std::vector<int>, std::greater<int> > my_min_heap;

A better regex to use to check if a string is HTML is:

/^/

For example:

/^/.test('') // true
/^/.test('foo bar baz') //true
/^/.test('<p>fizz buzz</p>') //true

In fact, it's so good, that it'll return true for every string passed to it, which is because every string is HTML. Seriously, even if it's poorly formatted or invalid, it's still HTML.

If what you're looking for is the presence of HTML elements, rather than simply any text content, you could use something along the lines of:

/<\/?[a-z][\s\S]*>/i.test()

It won't help you parse the HTML in any way, but it will certainly flag the string as containing HTML elements.

Nothing worked for me but following thing was awesome:

1) Open

httpd-xampp.conf

which is at

/opt/lampp/etc/extra/

2) Find <Directory "/opt/lampp/phpmyadmin">

3) Now just add Require all granted before

4) So the code will look like this
<Directory "/opt/lampp/phpmyadmin"> AllowOverride AuthConfig Limit Order allow,deny Allow from all Require all granted </Directory>

5) Now finally Restart the xampp with this command /opt/lampp/lampp restart

That's it and you are Done!

It also work with xampp. :)

Here is how I know if one list is a subset of another one, the sequence matters to me in my case.

def is_subset(list_long,list_short):
    short_length = len(list_short)
    subset_list = []
    for i in range(len(list_long)-short_length+1):
        subset_list.append(list_long[i:i+short_length])
    if list_short in subset_list:
        return True
    else: return False

There's a really good paper by Microsoft Research called To Blob or Not To Blob.

Their conclusion after a large number of performance tests and analysis is this:

• if your pictures or document are typically below 256KB in size, storing them in a database VARBINARY column is more efficient

• if your pictures or document are typically over 1 MB in size, storing them in the filesystem is more efficient (and with SQL Server 2008's FILESTREAM attribute, they're still under transactional control and part of the database)

• in between those two, it's a bit of a toss-up depending on your use

If you decide to put your pictures into a SQL Server table, I would strongly recommend using a separate table for storing those pictures - do not store the employee photo in the employee table - keep them in a separate table. That way, the Employee table can stay lean and mean and very efficient, assuming you don't always need to select the employee photo, too, as part of your queries.

For filegroups, check out Files and Filegroup Architecture for an intro. Basically, you would either create your database with a separate filegroup for large data structures right from the beginning, or add an additional filegroup later. Let's call it "LARGE_DATA".

Now, whenever you have a new table to create which needs to store VARCHAR(MAX) or VARBINARY(MAX) columns, you can specify this file group for the large data:

 CREATE TABLE dbo.YourTable
     (....... define the fields here ......)
     ON Data                   -- the basic "Data" filegroup for the regular data
     TEXTIMAGE_ON LARGE_DATA   -- the filegroup for large chunks of data

Check out the MSDN intro on filegroups, and play around with it!

May be useful for someone.. In Run as if you are getting only java application (No spring bootapp).. then probably you need to install "Spring Tools (aka Spring IDE and Spring Tool Suite)" through Eclipse market place. After successful installation and restart of Eclipse.. now you can see in Run as "Spring Boot app".

Change this key in the Info.plist

I changed from

<key>JVMVersion</key>
<string>1.6*</string>

to

<key>JVMVersion</key>
<string>1.8*</string>

and it worked fine now..

Edited:
Per the official statement as mentioned above by hasternet and aried3r, the solution by Antonio Jose is correct.

Thanks!

Depending on the hibernate flush mode that you are using (AUTO is the default) save may or may not write your changes to the DB straight away. When you call saveAndFlush you are enforcing the synchronization of your model state with the DB.

If you use flush mode AUTO and you are using your application to first save and then select the data again, you will not see a difference in bahvior between save() and saveAndFlush() because the select triggers a flush first. See the documention.

You're probably just getting a stack overflow here. The array is too big to fit in your program's stack address space.

If you allocate the array on the heap you should be fine, assuming your machine has enough memory.

int* array = new int[1000000];

But remember that this will require you to delete[] the array. A better solution would be to use std::vector<int> and resize it to 1000000 elements.

As far as the client certificate approach goes, it would not be terribly difficult to implement while still allowing the users without client certificates in.

If you did in fact create your own self-signed Certification Authority, and issued client certs to each client service, you would have an easy way of authenticating those services.

Depending on the web server you are using, there should be a method to specify client authentication that will accept a client cert, but does not require one. For example, in Tomcat when specifying your https connector, you can set 'clientAuth=want', instead of 'true' or 'false'. You would then make sure to add your self signed CA certificate to your truststore (by default the cacerts file in the JRE you are using, unless you specified another file in your webserver configuration), so the only trusted certificates would be those issued off of your self signed CA.

On the server side, you would only allow access to the services you wish to protect if you are able to retrieve a client certificate from the request (not null), and passes any DN checks if you prefer any extra security. For the users without client certs, they would still be able to access your services, but will simply have no certificates present in the request.

In my opinion this is the most 'secure' way, but it certainly has its learning curve and overhead, so may not necessarily be the best solution for your needs.

If you prefer to use annotations to selectively silence rules, this is now possible using the @SuppressWarnings annotation, starting with Checkstyle 5.7 (and supported by the Checkstyle Maven Plugin 2.12+).

First, in your checkstyle.xml, add the SuppressWarningsHolder module to the TreeWalker:

<module name="TreeWalker">
    <!-- Make the @SuppressWarnings annotations available to Checkstyle -->
    <module name="SuppressWarningsHolder" />
</module>

Next, enable the SuppressWarningsFilter there (as a sibling to TreeWalker):

<!-- Filter out Checkstyle warnings that have been suppressed with the @SuppressWarnings annotation -->
<module name="SuppressWarningsFilter" />

<module name="TreeWalker">
...

Now you can annotate e.g. the method you want to exclude from a certain Checkstyle rule:

@SuppressWarnings("checkstyle:methodlength")
@Override
public boolean equals(Object obj) {
    // very long auto-generated equals() method
}

The checkstyle: prefix in the argument to @SuppressWarnings is optional, but I like it as a reminder where this warning came from. The rule name must be lowercase.

Lastly, if you're using Eclipse, it will complain about the argument being unknown to it:

Unsupported @SuppressWarnings("checkstyle:methodlength")

You can disable this Eclipse warning in the preferences if you like:

Preferences:
  Java
  --> Compiler
  --> Errors/Warnings
  --> Annotations
  --> Unhandled token in '@SuppressWarnings': set to 'Ignore'

git log --grep=<pattern>
    Limit the commits output to ones with log message that matches the 
    specified pattern (regular expression).

--git help log

Clear() set the Text property to nothing. So txtbox1.Text = Nothing does the same thing as clear. An empty string (also available through String.Empty) is not a null reference, but has no value of course.

If notifyItemChanged(int position), notifyItemInserted(int position) Use instead of each other This problem occurs when you want to update the item use notifyItemChanged and when you want to add the item use notifyItemInserted

I would use the padding attribute. This will allow you add a set number of pixels to either side of the element without the element loosing its span qualities:

• It won't become a block
• It will float as you expect

This method will only add to the padding however, so if you change the length of the content (from Categories to Tags, for example) the size of the content will change and the overall size of the element will change as well. But if you really want to set a rigid size, you should do as mentioned above and use a div.

See the box model for more details about the box model, content, padding, margin, etc.

On CentOS, you need the postgres dev packages:

sudo yum install python-devel postgresql-devel

That was the solution on CentOS 6 at least.

Benoit's solution works, but you really don't need to incur the overhead to draw a shape. Since colors can be drawables, just define a color in a /res/values/colors.xml file:

<?xml version="1.0" encoding="utf-8"?>
<resources>
    <color name="semitransparent_white">#77ffffff</color>
</resources>

And then use as such in your selector:

<?xml version="1.0" encoding="utf-8"?>
<selector xmlns:android="http://schemas.android.com/apk/res/android">
    <item
        android:state_pressed="true"
        android:drawable="@color/semitransparent_white" />
</selector>

Since it's essentially a double...

Divide by 60.0 and extract the integral part and the fractional part.

The integral part will be the whole number of minutes.

Multiply the fractional part by 60.0 again.

The result will be the remaining seconds.

It is maybe cheating, but it's works:

 @foreach (var yourEnum in Html.GetEnumSelectList<YourEnum>())
 {
     @yourEnum.Text
 }

You can call sortable on a <tbody> instead of on the individual rows.

<table>
    <tbody>
        <tr> 
            <td>1</td>
            <td>2</td>
        </tr>
        <tr>
            <td>3</td>
            <td>4</td> 
        </tr>
        <tr>
            <td>5</td>
            <td>6</td>
        </tr>  
    </tbody>    
</table>?

<script>
    $('tbody').sortable();
</script> 

$(function() {_x000D_
  $( "tbody" ).sortable();_x000D_
});

 _x000D_
table {_x000D_
    border-spacing: collapse;_x000D_
    border-spacing: 0;_x000D_
}_x000D_
td {_x000D_
    width: 50px;_x000D_
    height: 25px;_x000D_
    border: 1px solid black;_x000D_
}

 _x000D_
_x000D_
<link href="//code.jquery.com/ui/1.11.1/themes/smoothness/jquery-ui.css" rel="stylesheet">_x000D_
<script src="//code.jquery.com/jquery-1.11.1.js"></script>_x000D_
<script src="//code.jquery.com/ui/1.11.1/jquery-ui.js"></script>_x000D_
_x000D_
<table>_x000D_
    <tbody>_x000D_
        <tr>_x000D_
            <td>1</td>_x000D_
            <td>2</td>_x000D_
        </tr>_x000D_
        <tr>_x000D_
            <td>3</td>_x000D_
            <td>4</td>_x000D_
        </tr>_x000D_
        <tr> _x000D_
            <td>5</td>_x000D_
            <td>6</td>_x000D_
        </tr>_x000D_
        <tr>_x000D_
            <td>7</td>_x000D_
            <td>8</td>_x000D_
        </tr>_x000D_
        <tr>_x000D_
            <td>9</td> _x000D_
            <td>10</td>_x000D_
        </tr>  _x000D_
    </tbody>    _x000D_
</table>

If there is an object with 8 methods and you have a test where you want to call 7 real methods and stub one method you have two options:

1. Using a mock you would have to set it up by invoking 7 callRealMethod and stub one method
2. Using a spy you have to set it up by stubbing one method

The official documentation on doCallRealMethod recommends using a spy for partial mocks.

See also javadoc spy(Object) to find out more about partial mocks. Mockito.spy() is a recommended way of creating partial mocks. The reason is it guarantees real methods are called against correctly constructed object because you're responsible for constructing the object passed to spy() method.

Horizontal centering is as easy as:

text-align: center

Vertical centering when the container is a known height:

height: 100px;
line-height: 100px;
vertical-align: middle

Vertical centering when the container isn't a known height AND you can set the image in the background:

background: url(someimage) no-repeat center center;

From the HTML 4 specification:

ID and NAME tokens must begin with a letter ([A-Za-z]) and may be followed by any number of letters, digits ([0-9]), hyphens ("-"), underscores ("_"), colons (":"), and periods (".").

A common mistake is to use an ID that starts with a digit.

JavaScript does not have such declarations. It would be:

var cubes = ...

regardless

But you can do:

for(var i = 0; i < cubes.length; i++)
{
  for(var j = 0; j < cubes[i].length; j++)
  {

  }
}

Note that JavaScript allows jagged arrays, like:

[
  [1, 2, 3],
  [1, 2, 3, 4]
]

since arrays can contain any type of object, including an array of arbitrary length.

As noted by MDC:

"for..in should not be used to iterate over an Array where index order is important"

If you use your original syntax, there is no guarantee the elements will be visited in numeric order.

move c:\Sourcefoldernam\*.* e:\destinationFolder

^ This did not work for me for some reason

But when I tried using quotation marks, it suddenly worked:

move "c:\Sourcefoldernam\*.*" "e:\destinationFolder"

I think its because my directory had spaces in one of the folders. So if it doesn't work for you, try with quotation marks!

That looks like it might belong in the select statement:

SELECT id, col1, col2, col3, (CASE WHEN table3.col3 IS NULL THEN table2.col3 AS col4 ELSE table3.col3 as col4 END)
FROM table1
LEFT OUTER JOIN table2
ON table1.id = table2.id
LEFT OUTER JOIN table3
ON table1.id = table3.id

function stripTrailingSlash(text) {
    return text
        .split('/')
        .filter(Boolean)
        .join('/');
}

another solution.

Little bit off topic but say i want to remove all 2s from a list. Here's a very elegant way to do that.

void RemoveAll<T>(T item,List<T> list)
{
    while(list.Contains(item)) list.Remove(item);
}

With predicate:

void RemoveAll<T>(Func<T,bool> predicate,List<T> list)
{
    while(list.Any(predicate)) list.Remove(list.First(predicate));
}

+1 only to encourage you to leave your answer here for learning purposes. You're also right about it being off-topic, but I won't ding you for that because of there is significant value in leaving your examples here, again, strictly for learning purposes. I'm posting this response as an edit because posting it as a series of comments would be unruly.

Though your examples are short & compact, neither is elegant in terms of efficiency; the first is bad at O(n²), the second, absolutely abysmal at O(n³). Algorithmic efficiency of O(n²) is bad and should be avoided whenever possible, especially in general-purpose code; efficiency of O(n³) is horrible and should be avoided in all cases except when you know n will always be very small. Some might fling out their "premature optimization is the root of all evil" battle axes, but they do so naïvely because they do not truly understand the consequences of quadratic growth since they've never coded algorithms that have to process large datasets. As a result, their small-dataset-handling algorithms just run generally slower than they could, and they have no idea that they could run faster. The difference between an efficient algorithm and an inefficient algorithm is often subtle, but the performance difference can be dramatic. The key to understanding the performance of your algorithm is to understand the performance characteristics of the primitives you choose to use.

In your first example, list.Contains() and Remove() are both O(n), so a while() loop with one in the predicate & the other in the body is O(n²); well, technically O(m*n), but it approaches O(n²) as the number of elements being removed (m) approaches the length of the list (n).

Your second example is even worse: O(n³), because for every time you call Remove(), you also call First(predicate), which is also O(n). Think about it: Any(predicate) loops over the list looking for any element for which predicate() returns true. Once it finds the first such element, it returns true. In the body of the while() loop, you then call list.First(predicate) which loops over the list a second time looking for the same element that had already been found by list.Any(predicate). Once First() has found it, it returns that element which is passed to list.Remove(), which loops over the list a third time to yet once again find that same element that was previously found by Any() and First(), in order to finally remove it. Once removed, the whole process starts over at the beginning with a slightly shorter list, doing all the looping over and over and over again starting at the beginning every time until finally no more elements matching the predicate remain. So the performance of your second example is O(m*m*n), or O(n³) as m approaches n.

Your best bet for removing all items from a list that match some predicate is to use the generic list's own List<T>.RemoveAll(predicate) method, which is O(n) as long as your predicate is O(1). A for() loop technique that passes over the list only once, calling list.RemoveAt() for each element to be removed, may seem to be O(n) since it appears to pass over the loop only once. Such a solution is more efficient than your first example, but only by a constant factor, which in terms of algorithmic efficiency is negligible. Even a for() loop implementation is O(m*n) since each call to Remove() is O(n). Since the for() loop itself is O(n), and it calls Remove() m times, the for() loop's growth is O(n²) as m approaches n.

UPDATE: In iPhone OS 3.0 and later UITableViewCell now has a backgroundColor property that makes this really easy (especially in combination with the [UIColor colorWithPatternImage:] initializer). But I'll leave the 2.0 version of the answer here for anyone that needs it…

It's harder than it really should be. Here's how I did this when I had to do it:

You need to set the UITableViewCell's backgroundView property to a custom UIView that draws the border and background itself in the appropriate colors. This view needs to be able to draw the borders in 4 different modes, rounded on the top for the first cell in a section, rounded on the bottom for the last cell in a section, no rounded corners for cells in the middle of a section, and rounded on all 4 corners for sections that contain one cell.

Unfortunately I couldn't figure out how to have this mode set automatically, so I had to set it in the UITableViewDataSource's -cellForRowAtIndexPath method.

It's a real PITA but I've confirmed with Apple engineers that this is currently the only way.

Update Here's the code for that custom bg view. There's a drawing bug that makes the rounded corners look a little funny, but we moved to a different design and scrapped the custom backgrounds before I had a chance to fix it. Still this will probably be very helpful for you:

//
//  CustomCellBackgroundView.h
//
//  Created by Mike Akers on 11/21/08.
//  Copyright 2008 __MyCompanyName__. All rights reserved.
//

#import <UIKit/UIKit.h>

typedef enum  {
    CustomCellBackgroundViewPositionTop, 
    CustomCellBackgroundViewPositionMiddle, 
    CustomCellBackgroundViewPositionBottom,
    CustomCellBackgroundViewPositionSingle
} CustomCellBackgroundViewPosition;

@interface CustomCellBackgroundView : UIView {
    UIColor *borderColor;
    UIColor *fillColor;
    CustomCellBackgroundViewPosition position;
}

    @property(nonatomic, retain) UIColor *borderColor, *fillColor;
    @property(nonatomic) CustomCellBackgroundViewPosition position;
@end

//
//  CustomCellBackgroundView.m
//
//  Created by Mike Akers on 11/21/08.
//  Copyright 2008 __MyCompanyName__. All rights reserved.
//

#import "CustomCellBackgroundView.h"

static void addRoundedRectToPath(CGContextRef context, CGRect rect,
                                 float ovalWidth,float ovalHeight);

@implementation CustomCellBackgroundView
@synthesize borderColor, fillColor, position;

- (BOOL) isOpaque {
    return NO;
}

- (id)initWithFrame:(CGRect)frame {
    if (self = [super initWithFrame:frame]) {
        // Initialization code
    }
    return self;
}

- (void)drawRect:(CGRect)rect {
    // Drawing code
    CGContextRef c = UIGraphicsGetCurrentContext();
    CGContextSetFillColorWithColor(c, [fillColor CGColor]);
    CGContextSetStrokeColorWithColor(c, [borderColor CGColor]);

    if (position == CustomCellBackgroundViewPositionTop) {
        CGContextFillRect(c, CGRectMake(0.0f, rect.size.height - 10.0f, rect.size.width, 10.0f));
        CGContextBeginPath(c);
        CGContextMoveToPoint(c, 0.0f, rect.size.height - 10.0f);
        CGContextAddLineToPoint(c, 0.0f, rect.size.height);
        CGContextAddLineToPoint(c, rect.size.width, rect.size.height);
        CGContextAddLineToPoint(c, rect.size.width, rect.size.height - 10.0f);
        CGContextStrokePath(c);
        CGContextClipToRect(c, CGRectMake(0.0f, 0.0f, rect.size.width, rect.size.height - 10.0f));
    } else if (position == CustomCellBackgroundViewPositionBottom) {
        CGContextFillRect(c, CGRectMake(0.0f, 0.0f, rect.size.width, 10.0f));
        CGContextBeginPath(c);
        CGContextMoveToPoint(c, 0.0f, 10.0f);
        CGContextAddLineToPoint(c, 0.0f, 0.0f);
        CGContextStrokePath(c);
        CGContextBeginPath(c);
        CGContextMoveToPoint(c, rect.size.width, 0.0f);
        CGContextAddLineToPoint(c, rect.size.width, 10.0f);
        CGContextStrokePath(c);
        CGContextClipToRect(c, CGRectMake(0.0f, 10.0f, rect.size.width, rect.size.height));
    } else if (position == CustomCellBackgroundViewPositionMiddle) {
        CGContextFillRect(c, rect);
        CGContextBeginPath(c);
        CGContextMoveToPoint(c, 0.0f, 0.0f);
        CGContextAddLineToPoint(c, 0.0f, rect.size.height);
        CGContextAddLineToPoint(c, rect.size.width, rect.size.height);
        CGContextAddLineToPoint(c, rect.size.width, 0.0f);
        CGContextStrokePath(c);
        return; // no need to bother drawing rounded corners, so we return
    }

    // At this point the clip rect is set to only draw the appropriate
    // corners, so we fill and stroke a rounded rect taking the entire rect

    CGContextBeginPath(c);
    addRoundedRectToPath(c, rect, 10.0f, 10.0f);
    CGContextFillPath(c);  

    CGContextSetLineWidth(c, 1);  
    CGContextBeginPath(c);
    addRoundedRectToPath(c, rect, 10.0f, 10.0f);  
    CGContextStrokePath(c); 
}


- (void)dealloc {
    [borderColor release];
    [fillColor release];
    [super dealloc];
}


@end

static void addRoundedRectToPath(CGContextRef context, CGRect rect,
                                float ovalWidth,float ovalHeight)

{
    float fw, fh;

    if (ovalWidth == 0 || ovalHeight == 0) {// 1
        CGContextAddRect(context, rect);
        return;
    }

    CGContextSaveGState(context);// 2

    CGContextTranslateCTM (context, CGRectGetMinX(rect),// 3
                           CGRectGetMinY(rect));
    CGContextScaleCTM (context, ovalWidth, ovalHeight);// 4
    fw = CGRectGetWidth (rect) / ovalWidth;// 5
    fh = CGRectGetHeight (rect) / ovalHeight;// 6

    CGContextMoveToPoint(context, fw, fh/2); // 7
    CGContextAddArcToPoint(context, fw, fh, fw/2, fh, 1);// 8
    CGContextAddArcToPoint(context, 0, fh, 0, fh/2, 1);// 9
    CGContextAddArcToPoint(context, 0, 0, fw/2, 0, 1);// 10
    CGContextAddArcToPoint(context, fw, 0, fw, fh/2, 1); // 11
    CGContextClosePath(context);// 12

    CGContextRestoreGState(context);// 13
}

You could use the rename(1) command:

rename 's/(.*)$/new.$1/' original.filename

Edit: If rename isn't available and you have to rename more than one file, shell scripting can really be short and simple for this. For example, to rename all *.jpg to prefix_*.jpg in the current directory:

for filename in *.jpg; do mv "$filename" "prefix_$filename"; done;

Answer: NO

Here's Why ... I think a key reason for having stored procs in a database is that you're executing SP code in the same process as the SQL engine. This makes sense for database engines designed to work as a network connected service but the imperative for SQLite is much less given that it runs as a DLL in your application process rather than in a separate SQL engine process. So it makes more sense to implement all your business logic including what would have been SP code in the host language.

You can however extend SQLite with your own user defined functions in the host language (PHP, Python, Perl, C#, Javascript, Ruby etc). You can then use these custom functions as part of any SQLite select/update/insert/delete. I've done this in C# using DevArt's SQLite to implement password hashing.

white-space: nowrap;: Will never break text, will keep other defaults

white-space: pre;: Will never break text, will keep multiple spaces after one another as multiple spaces, will break if explicitly written to break(pressing enter in html etc)

Just wrap the float, boolean, int or similar in an NSNumber.

For structs, I don't know of a handy solution, but you could make a separate ObjC class that owns such a struct.

Unfortunately, URLEncoder.encode() does not produce valid percent-encoding (as specified in RFC 3986).

URLEncoder.encode() encodes everything just fine, except space is encoded to "+". All the Java URI encoders that I could find only expose public methods to encode the query, fragment, path parts etc. - but don't expose the "raw" encoding. This is unfortunate as fragment and query are allowed to encode space to +, so we don't want to use them. Path is encoded properly but is "normalized" first so we can't use it for 'generic' encoding either.

Best solution I could come up with:

return URLEncoder.encode(raw, "UTF-8").replaceAll("\\+", "%20");

If replaceAll() is too slow for you, I guess the alternative is to roll your own encoder...

EDIT: I had this code in here first which doesn't encode "?", "&", "=" properly:

//don't use - doesn't properly encode "?", "&", "="
new URI(null, null, null, raw, null).toString().substring(1);

To change color of a cell:

$(document).on('click', '#table tbody td', function (event) {


    var selected = $(this).hasClass("obstacle");
    $("#table tbody td").removeClass("obstacle");
    if (!selected)
        $(this).addClass("obstacle");

});

Using all built-ins..

tuple(map(sum, zip(a, b)))

The jQuery UI sortable plugin provides drag-and-drop reordering. A save button can extract the IDs of each item to create a comma-delimited string of those IDs, added to a hidden textbox. The textbox is returned to the server using an async postback.

This fiddle example reorders table elements, but does not save them to a database.

The sortable plugin takes one line of code to turn any list into a sortable list. If you care to use them, it also provides CSS and images to provide a visual impact to sortable list (see the example that I linked to). Developers, however, must provide code to retrieve items in their new order. I embed unique IDs of each item in the list as an HTML attribute and then retrieve those IDs via jQuery.

For example:

// ----- code executed when the document loads
$(function() {
    wireReorderList();
});

function wireReorderList() {
    $("#reorderExampleItems").sortable();
    $("#reorderExampleItems").disableSelection();
}

function saveOrderClick() {
    // ----- Retrieve the li items inside our sortable list
    var items = $("#reorderExampleItems li");

    var linkIDs = [items.size()];
    var index = 0;

    // ----- Iterate through each li, extracting the ID embedded as an attribute
    items.each(
        function(intIndex) {
            linkIDs[index] = $(this).attr("ExampleItemID");
            index++;
        });

    $get("<%=txtExampleItemsOrder.ClientID %>").value = linkIDs.join(",");
}

If you're trying to create a single jar that contains your application and its required libraries, there are two ways (that I know of) to do that. The first is One-Jar, which uses a special classloader to allow the nesting of jars. The second is UberJar, (or Shade), which explodes the included libraries and puts all the classes in the top-level jar.

I should also mention that UberJar and Shade are plugins for Maven1 and Maven2 respectively. As mentioned below, you can also use the assembly plugin (which in reality is much more powerful, but much harder to properly configure).

I'm a bit of a beginner and struggled getting this to work today.

Below is the class that I ended up with. It works but I was wondering how imperfect my solution is. Anyway, I was hoping some of you more experienced folk might be willing to have a look at my IO class and give me some tips. Cheers!

public class HighScore {
    File data = new File(Environment.getExternalStorageDirectory().getAbsolutePath() + File.separator);
    File file = new File(data, "highscore.txt");
    private int highScore = 0;

    public int readHighScore() {
        try {
            BufferedReader br = new BufferedReader(new FileReader(file));
            try {
                highScore = Integer.parseInt(br.readLine());
                br.close();
            } catch (NumberFormatException | IOException e) {
                e.printStackTrace();
            }
        } catch (FileNotFoundException e) {
            try {
                file.createNewFile();
            } catch (IOException ioe) {
                ioe.printStackTrace();
            }
            e.printStackTrace();
        }
        return highScore;
    }

    public void writeHighScore(int highestScore) {
        try {
            BufferedWriter bw = new BufferedWriter(new FileWriter(file));
            bw.write(String.valueOf(highestScore));
            bw.close();
        } catch (IOException e) {
            e.printStackTrace();
        }
    }
}

    jQuery("#input").live('change', function() {
        // since we check more than once against the value, place it in a var.
        var inputvalue = $("#input").attr("value");

        // if it's value **IS NOT** ""
        if(inputvalue !== "") {
            jQuery(this).css('outline', 'solid 1px red'); 
        }   

        // else if it's value **IS** ""
        else if(inputvalue === "") {
            alert('empty'); 
        }

    });

Your code was compiled with Java Version 1.8 while it is being executed with Java Version 1.7 or below.

In your case it seems that two different Java installations are used, the newer to compile and the older to execute your code.

Try recompiling your code with Java 1.7 or upgrade your Java Plugin.

You can try running a simple web server based on Twisted

I've been using something like this. Just set up a simple HTML page with an textinput. Make sure that the textinput always has focus. When you scan a barcode with your barcode scanner you will receive the code and after that a 'enter'. Realy simple then; just capture the incoming keystrokes and when the 'enter' comes in you can use AJAX to handle your code.

Do you really need that plugin? You can just animate the scrollTop property:

$("#nav ul li a[href^='#']").on('click', function(e) {

   // prevent default anchor click behavior
   e.preventDefault();

   // store hash
   var hash = this.hash;

   // animate
   $('html, body').animate({
       scrollTop: $(hash).offset().top
     }, 300, function(){

       // when done, add hash to url
       // (default click behaviour)
       window.location.hash = hash;
     });

});

fiddle

I've thought long and hard about this and finally ended up with the solution I'll describe below. It's a pretty big step up in complexity but if you do make this step, you'll end up with what you are really after, which is deterministic results for future requests.

Your example of an item being deleted is only the tip of the iceberg. What if you are filtering by color=blue but someone changes item colors in between requests? Fetching all items in a paged manner reliably is impossible... unless... we implement revision history.

I've implemented it and it's actually less difficult than I expected. Here's what I did:

• I created a single table changelogs with an auto-increment ID column
• My entities have an id field, but this is not the primary key
• The entities have a changeId field which is both the primary key as well as a foreign key to changelogs.
• Whenever a user creates, updates or deletes a record, the system inserts a new record in changelogs, grabs the id and assigns it to a new version of the entity, which it then inserts in the DB
• My queries select the maximum changeId (grouped by id) and self-join that to get the most recent versions of all records.
• Filters are applied to the most recent records
• A state field keeps track of whether an item is deleted
• The max changeId is returned to the client and added as a query parameter in subsequent requests
• Because only new changes are created, every single changeId represents a unique snapshot of the underlying data at the moment the change was created.
• This means that you can cache the results of requests that have the parameter changeId in them forever. The results will never expire because they will never change.
• This also opens up exciting feature such as rollback / revert, synching client cache etc. Any features that benefit from change history.

Use encode() function along with hardcoded String value given in a single quote.

Ex:

file.write(answers[i] + '\n'.encode())

OR

line.split(' +++$+++ '.encode())

word-break:break-all :

word to continue to border then break in newline.

word-wrap:break-word :

At first , word wrap in newline then continue to border.

Example :

div {_x000D_
   border: 1px solid red;_x000D_
   width: 200px;_x000D_
}_x000D_
_x000D_
span {_x000D_
  background-color: yellow;_x000D_
}_x000D_
_x000D_
.break-all {_x000D_
  word-break:break-all;_x000D_
 }_x000D_
.break-word {_x000D_
  word-wrap:break-word;  _x000D_
}

<b>word-break:break-all</b>_x000D_
_x000D_
<div class="break-all">_x000D_
  This text is styled with_x000D_
  <span>soooooooooooooooooooooooooome</span> of the text_x000D_
  formatting properties._x000D_
</div>_x000D_
_x000D_
<b> word-wrap:break-word</b>_x000D_
_x000D_
<div class="break-word">_x000D_
  This text is styled with_x000D_
  <span>soooooooooooooooooooooooooome</span> of the text_x000D_
  formatting properties._x000D_
</div>

SELECT * 
FROM table_name
WHERE table_name.the_date > DATE_SUB(CURDATE(), INTERVAL 1 DAY)

You can also use Requestify, a really cool and very simple HTTP client I wrote for nodeJS + it supports caching.

Just do the following for GET method request:

var requestify = require('requestify');

requestify.get('http://example.com/api/resource')
  .then(function(response) {
      // Get the response body (JSON parsed or jQuery object for XMLs)
      response.getBody();
  }
);

For anyone using entity framework core ending up here. This is how you do it.

# Powershell / Package manager console
Script-Migration

# Cli 
dotnet ef migrations script

You can use the -From and -To parameter to generate an update script to update a database to a specific version.

Script-Migration -From 20190101011200_Initial-Migration -To 20190101021200_Migration-2

https://docs.microsoft.com/en-us/ef/core/managing-schemas/migrations/#generate-sql-scripts

There are several options to this command.

The from migration should be the last migration applied to the database before running the script. If no migrations have been applied, specify 0 (this is the default).

The to migration is the last migration that will be applied to the database after running the script. This defaults to the last migration in your project.

An idempotent script can optionally be generated. This script only applies migrations if they haven't already been applied to the database. This is useful if you don't exactly know what the last migration applied to the database was or if you are deploying to multiple databases that may each be at a different migration.

EDIT: I found this link. Hope it helps. http://viralpatel.net/blogs/2011/02/clearable-textbox-jquery.html

You have mentioned you want it on the right of the input text. So, the best way would be to create an image next to the input box. If you are looking something inside the box, you can use background image but you may not be able to write a script to clear the box.

So, insert and image and write a JavaScript code to clear the textbox.

bobince's answer will let you know in which cases "height: XX%;" will or won't work.

If you want to create an element with a set ratio (height: % of it's own width), the best way to do that is by effectively setting the height using padding-bottom. Example for square:

<div class="square-container">
  <div class="square-content">
    <!-- put your content in here -->
  </div>
</div>

.square-container {  /* any display: block; element */
  position: relative;
  height: 0;
  padding-bottom: 100%; /* of parent width */
}
.square-content {
  position: absolute;
  left: 0;
  top: 0;
  height: 100%;
  width: 100%;
}

The square container will just be made of padding, and the content will expand to fill the container. Long article from 2009 on this subject: http://alistapart.com/article/creating-intrinsic-ratios-for-video

Here is another way to remove non-alphabetic characters using an iTVF. First, you need a pattern-based string splitter. Here is one taken from Dwain Camp's article:

-- PatternSplitCM will split a string based on a pattern of the form 
-- supported by LIKE and PATINDEX 
-- 
-- Created by: Chris Morris 12-Oct-2012 
CREATE FUNCTION [dbo].[PatternSplitCM]
(
       @List                VARCHAR(8000) = NULL
       ,@Pattern            VARCHAR(50)
) RETURNS TABLE WITH SCHEMABINDING 
AS 

RETURN
    WITH numbers AS (
        SELECT TOP(ISNULL(DATALENGTH(@List), 0))
            n = ROW_NUMBER() OVER(ORDER BY (SELECT NULL))
        FROM
        (VALUES (0),(0),(0),(0),(0),(0),(0),(0),(0),(0)) d (n),
        (VALUES (0),(0),(0),(0),(0),(0),(0),(0),(0),(0)) e (n),
        (VALUES (0),(0),(0),(0),(0),(0),(0),(0),(0),(0)) f (n),
        (VALUES (0),(0),(0),(0),(0),(0),(0),(0),(0),(0)) g (n)
    )

    SELECT
        ItemNumber = ROW_NUMBER() OVER(ORDER BY MIN(n)),
        Item = SUBSTRING(@List,MIN(n),1+MAX(n)-MIN(n)),
        [Matched]
    FROM (
        SELECT n, y.[Matched], Grouper = n - ROW_NUMBER() OVER(ORDER BY y.[Matched],n)
        FROM numbers
        CROSS APPLY (
            SELECT [Matched] = CASE WHEN SUBSTRING(@List,n,1) LIKE @Pattern THEN 1 ELSE 0 END
        ) y
    ) d
    GROUP BY [Matched], Grouper

Now that you have a pattern-based splitter, you need to split the strings that match the pattern:

[a-z]

and then concatenate them back to get the desired result:

SELECT *
FROM tbl t
CROSS APPLY(
    SELECT Item + ''
    FROM dbo.PatternSplitCM(t.str, '[a-z]')
    WHERE Matched = 1
    ORDER BY ItemNumber
    FOR XML PATH('')
) x (a)

SAMPLE

Result:

| Id |              str |              a |
|----|------------------|----------------|
|  1 |    test“te d'abc |     testtedabc |
|  2 |            anr¤a |           anra |
|  3 |  gs-re-C“te d'ab |     gsreCtedab |
|  4 |         M‚fe, DF |          MfeDF |
|  5 |           R™temd |          Rtemd |
|  6 |          ™jad”ji |          jadji |
|  7 |      Cje y ret¢n |       Cjeyretn |
|  8 |        J™kl™balu |        Jklbalu |
|  9 |       le“ne-iokd |       leneiokd |
| 10 |   liode-Pyr‚n‚ie |    liodePyrnie |
| 11 |         V„s G”ta |          VsGta |
| 12 |        Sƒo Paulo |        SoPaulo |
| 13 |  vAstra gAtaland | vAstragAtaland |
| 14 |  ¥uble / Bio-Bio |     ubleBioBio |
| 15 | U“pl™n/ds VAsb-y |    UplndsVAsby |

This simple solution worked for me when I needed to prevent the user from entering empty strings into an EditText. You can of course add more characters:

InputFilter textFilter = new InputFilter() {

@Override

public CharSequence filter(CharSequence c, int arg1, int arg2,

    Spanned arg3, int arg4, int arg5) {

    StringBuilder sbText = new StringBuilder(c);

    String text = sbText.toString();

    if (text.contains(" ")) {    
        return "";   
    }    
    return c;   
    }   
};

private void setTextFilter(EditText editText) {

    editText.setFilters(new InputFilter[]{textFilter});

}

This is very easy with Google Guava:

for(final String token :
    Splitter
        .fixedLength(4)
        .split("Thequickbrownfoxjumps")){
    System.out.println(token);
}

Output:

Theq
uick
brow
nfox
jump
s

Or if you need the result as an array, you can use this code:

String[] tokens =
    Iterables.toArray(
        Splitter
            .fixedLength(4)
            .split("Thequickbrownfoxjumps"),
        String.class
    );

Reference:

• Splitter.fixedLength()
• Splitter.split()
• Iterables.toArray()

Note: Splitter construction is shown inline above, but since Splitters are immutable and reusable, it's a good practice to store them in constants:

private static final Splitter FOUR_LETTERS = Splitter.fixedLength(4);

// more code

for(final String token : FOUR_LETTERS.split("Thequickbrownfoxjumps")){
    System.out.println(token);
}

1. Inside your lib file

2. Create a folder called colors.

3. Inside the colors folder create a dart file and name it color.

4. Paste this code inside it

   const MaterialColor primaryOrange = MaterialColor(
       _orangePrimaryValue,
       <int, Color>{
           50: Color(0xFFFF9480),
           100: Color(0xFFFF9480),
           200: Color(0xFFFF9480),
           300: Color(0xFFFF9480),
           400: Color(0xFFFF9480),
           500: Color(0xFFFF9480),
           600: Color(0xFFFF9480),
           700: Color(0xFFFF9480),
           800: Color(0xFFFF9480),
           900: Color(0xFFFF9480),
       },
   );
   const int _orangePrimaryValue = 0xFFFF9480;
   

5. Go to your main.dart file and place this code in your theme

   theme:ThemeData(
       primarySwatch: primaryOrange,
   ),
   

6. Import the color folder in your main.dart like this import 'colors/colors.dart';

I had a same problem with scrolling in chrome. So i removed this lines of codes from my style file.

html{height:100%;}
body{height:100%;}

Now i can play with scroll and it works:

var pos = 500;
$("html,body").animate({ scrollTop: pos }, "slow");

Another way to do this on Ubuntu: use umake.

umake nodejs

installed the latest current version v11.14.0.

Plus:

• update to latest version with just one command

Minus:

• needs umake installed

For the more curious, I have also found that adding

border: 5px solid white

or any other variant of your liking, to make it blend in, works superbly.

If you are using TypeScript, it is a better approach to let the compiler check for nulls and undefineds (or the possibility thereof), rather than checking for them at run-time. (If you do want to check at run-time, then as many answers indicate, just use value == null).

Use the compile option strictNullChecks to tell the compiler to choke on possible null or undefined values. If you set this option, and then there is a situation where you do want to allow null and undefined, you can define the type as Type | null | undefined.

If you are able to use NOW() this would be simplest form:

SELECT * FROM `fab_scheduler` WHERE eventdate>=(NOW() - INTERVAL 1 DAY)) AND eventdate<NOW() ORDER BY eventdate DESC;

With MySQL 5.6+ query abowe should do. Depending on sql server, You may be required to use CURRDATE() instead of NOW() - which is alias for DATE(NOW()) and will return only date part of datetime data type;

I came across this issue twice once in upgrading to 3.2.18 from 3.2.1 and 4.3.5 from 3.2.8. In both cases, this error is because of different version of spring modules

a = ['it']
b = ['was']
c = ['annoying']

a.extend(b)
a.extend(c)

# a now equals ['it', 'was', 'annoying']

polyfill* :

Array.prototype.any=function(){
    return (this.some)?this.some(...arguments):this.filter(...arguments).reduce((a,b)=> a || b)
};

If you want to call it as Ruby , that it means .any not .any(), use :

Object.defineProperty( Array.prototype, 'any', {
  get: function ( ) { return (this.some)?this.some(function(e){return e}):this.filter(function(e){return e}).reduce((a,b)=> a || b) }
} ); 

__

`* : https://en.wikipedia.org/wiki/Polyfill

if you build an MVC project, its included by default. otherwise, what Nick said.

There is a single quote in $submitsubject or $submit_message

Why is this a problem?

The single quote char terminates the string in MySQL and everything past that is treated as a sql command. You REALLY don't want to write your sql like that. At best, your application will break intermittently (as you're observing) and at worst, you have just introduced a huge security vulnerability.

Imagine if someone submitted '); DROP TABLE private_messages; in submit message.

Your SQL Command would be:

INSERT INTO private_messages (to_id, from_id, time_sent, subject, message) 
        VALUES('sender_id', 'id', now(),'subjet','');

DROP TABLE private_messages;

Instead you need to properly sanitize your values.

AT A MINIMUM you must run each value through mysql_real_escape_string() but you should really be using prepared statements.

If you were using mysql_real_escape_string() your code would look like this:

if($_POST['submit_message']){

if($_POST['form_subject']==""){
    $submit_subject="(no subject)";
}else{
    $submit_subject=mysql_real_escape_string($_POST['form_subject']); 
}
$submit_message=mysql_real_escape_string($_POST['form_message']);
$sender_id = mysql_real_escape_string($_POST['sender_id']);

Here is a great article on prepared statements and PDO.

Everything you write in your own stylesheet is overwriting the user agent styles - that's the point of writing your own stylesheet.

I have a similar problem with IIS 7, Win 7 Enterprise Pack. I have changed the application Pool as in @Kirk answer :

Change the Application Pool mode to one that has Classic pipeline enabled".but no luck for me.

Adding one more step worked for me. I have changed the my website's .NET Frameworkis v2.0 to .NET Frameworkis v4.0. in ApplicationPool

char buffer [50];

unsigned long a = 5;

int n=sprintf (buffer, "%lu", a);

How To Read XML Data into a DataSet by Using Visual C# .NET contains some details. Basically, you can use the overloaded DataSet method ReadXml to get the data into a DataSet. Your XML data will be in the first DataTable there.

There is also a DataTable.ReadXml method.

To make it into a one liner you can try something like:

svn status | cut -d ' ' -f 8 | xargs svn revert

You would normally use -stringWithFormat here.

NSString *myString = [NSString stringWithFormat:@"%@%@%@", @"some text", stringVariable, @"some more text"];

You could use a subselect:

SELECT row 
FROM table 
WHERE id=(
    SELECT max(id) FROM table
    )

Note that if the value of max(id) is not unique, multiple rows are returned.

If you only want one such row, use @MichaelMior's answer,

SELECT row from table ORDER BY id DESC LIMIT 1

It is good to understand with a Venn diagramm.

here is the link to the source. There is a good description.

I was googling about how to convert an int to char, that got me here. But my question was to convert for example int of 6 to char of '6'. For those who came here like me, this is how to do it:

int num = 6;
num.ToString().ToCharArray()[0];

Try this:

fname = "feed.txt"

num_lines = 0
num_words = 0
num_chars = 0

with open(fname, 'r') as f:
    for line in f:
        words = line.split()

        num_lines += 1
        num_words += len(words)
        num_chars += len(line)

Back to your code:

fname = "feed.txt"
fname = open('feed.txt', 'r')

what's the point of this? fname is a string first and then a file object. You don't really use the string defined in the first line and you should use one variable for one thing only: either a string or a file object.

for line in feed:
    lines = line.split('\n')

line is one line from the file. It does not make sense to split('\n') it.

I thought it would be interesting to explore the benefits of using a genexp, so here's my take.

The example in the question uses square brackets to create a temporary list, and so is equivalent to:

file.writelines( list( "%s\n" % item for item in list ) )

Which needlessly constructs a temporary list of all the lines that will be written out, this may consume significant amounts of memory depending on the size of your list and how verbose the output of str(item) is.

Drop the square brackets (equivalent to removing the wrapping list() call above) will instead pass a temporary generator to file.writelines():

file.writelines( "%s\n" % item for item in list )

This generator will create newline-terminated representation of your item objects on-demand (i.e. as they are written out). This is nice for a couple of reasons:

• Memory overheads are small, even for very large lists
• If str(item) is slow there's visible progress in the file as each item is processed

This avoids memory issues, such as:

In [1]: import os

In [2]: f = file(os.devnull, "w")

In [3]: %timeit f.writelines( "%s\n" % item for item in xrange(2**20) )
1 loops, best of 3: 385 ms per loop

In [4]: %timeit f.writelines( ["%s\n" % item for item in xrange(2**20)] )
ERROR: Internal Python error in the inspect module.
Below is the traceback from this internal error.

Traceback (most recent call last):
...
MemoryError

(I triggered this error by limiting Python's max. virtual memory to ~100MB with ulimit -v 102400).

Putting memory usage to one side, this method isn't actually any faster than the original:

In [4]: %timeit f.writelines( "%s\n" % item for item in xrange(2**20) )
1 loops, best of 3: 370 ms per loop

In [5]: %timeit f.writelines( ["%s\n" % item for item in xrange(2**20)] )
1 loops, best of 3: 360 ms per loop

(Python 2.6.2 on Linux)

It's much easier to do like this:

if(!$('#foo').hasClass('bar')) { 
  ...
}

The ! in front of the criteria means false, works in most programming languages.

You can change the actual width/height attributes like this:

var theImg = document.getElementById('theImgId');
theImg.height = 150;
theImg.width = 150;

Separate with commas:

http://localhost:8080/MovieDB/GetJson?name=Actor1,Actor2,Actor3&startDate=20120101&endDate=20120505

or:

http://localhost:8080/MovieDB/GetJson?name=Actor1&name=Actor2&name=Actor3&startDate=20120101&endDate=20120505

or:

http://localhost:8080/MovieDB/GetJson?name[0]=Actor1&name[1]=Actor2&name[2]=Actor3&startDate=20120101&endDate=20120505

Either way, your method signature needs to be:

@RequestMapping(value = "/GetJson", method = RequestMethod.GET) 
public void getJson(@RequestParam("name") String[] ticker, @RequestParam("startDate") String startDate, @RequestParam("endDate") String endDate) {
   //code to get results from db for those params.
 }

I've seen those terms used interchangeably, but there are different ways of implementing it:

1. Send a cookie on the first response and then look for it on subsequent ones. The cookie says which real server to send to.
   Bad if you have to support cookie-less browsers
2. Partition based on the requester's IP address.
   Bad if it isn't static or if many come in through the same proxy.
3. If you authenticate users, partition based on user name (it has to be an HTTP supported authentication mode to do this).
4. Don't require state.
   Let clients hit any server (send state to the client and have them send it back)
   This is not a sticky session, it's a way to avoid having to do it.

I would suspect that sticky might refer to the cookie way, and that affinity might refer to #2 and #3 in some contexts, but that's not how I have seen it used (or use it myself)

you can use setAccessibilityIdentifier method for any subclass of UIView

UIImageView *image ;
[image setAccessibilityIdentifier:@"file name"] ;

NSString *file_name = [image accessibilityIdentifier] ;

SELECT tab.*,
    row_number() OVER () as rnum
  FROM tab;

Here's the relevant section in the docs.

P.S. This, in fact, fully matches the answer in the referenced question.

Here is another example based on Kat's and Bakudan's examples, but making it a just a bit more generic.

function getParams ()
{
    var result = {};
    var tmp = [];

    location.search
        .substr (1)
        .split ("&")
        .forEach (function (item)
        {
            tmp = item.split ("=");
            result [tmp[0]] = decodeURIComponent (tmp[1]);
        });

    return result;
}

location.getParams = getParams;

console.log (location.getParams());
console.log (location.getParams()["returnurl"]);

To easily check for problems with tabs/spaces you can actually do this:

python -m tabnanny yourfile.py

or you can just set up your editor correctly of course :-)

I would like to make a addon for tiago's answer:

Suppose you're hiding element using ng-show and adding a required attribute on the same:

<div ng-show="false">
    <input required name="something" ng-model="name"/>
</div>

will throw an error something like :

An invalid form control with name='' is not focusable

This is because you just cannot impose required validation on hidden elements. Using ng-required makes it easier to conditionally apply required validation which is just awesome!!

In my case I refactored code and put the creation of the Dialog in a separate class. I only handed over the clicked View because a View contains a context object already. This led to the same error message although all ran on the MainThread.

I then switched to handing over the Activity as well and used its context in the dialog creation -> Everything works now.

    fun showDialogToDeletePhoto(baseActivity: BaseActivity, clickedParent: View, deletePhotoClickedListener: DeletePhotoClickedListener) {
        val dialog = AlertDialog.Builder(baseActivity) // <-- here
   .setTitle(baseActivity.getString(R.string.alert_delete_picture_dialog_title))
...
}

I , can't format the code snippet properly, sorry :(

In 2013, with all the HTML5 stuff, you can just omit the 'action' attribute to self-submit a form

<form>

Actually, the Form Submission subsection of the current HTML5 draft does not allow action="" (empty attribute). It is against the specification.

From this other Stack Overflow answer.

If you define

    #!/bin/bash
        fun1(){
          echo "Fun1 from file1 $1"
        }
fun1 Hello
. file2 
fun1 Hello
exit 0

in file1(chmod 750 file1) and file2

   fun1(){
      echo "Fun1 from file2 $1"
    }
    fun2(){
      echo "Fun1 from file1 $1"
    }

and run ./file2 you'll get Fun1 from file1 Hello Fun1 from file2 Hello Surprise!!! You overwrite fun1 in file1 with fun1 from file2... So as not to do so you must

declare -f pr_fun1=$fun1
. file2
unset -f fun1
fun1=$pr_fun1
unset -f pr_fun1
fun1 Hello

it's save your previous definition for fun1 and restore it with the previous name deleting not needed imported one. Every time you import functions from another file you may remember two aspects:

1. you may overwrite existing ones with the same names(if that the thing you want you must preserve them as described above)
2. import all content of import file(functions and global variables too) Be careful! It's dangerous procedure

The previous answer from Andreas_D is good. I'm just going to add that wherever you are displaying the output there will be a font and a character encoding and it may not support some characters.

To work out whether it is Java or your display that is a problem, do this:

    for(int i=0;i<str.length();i++) {
        char ch = str.charAt(i);
        System.out.println(i+" : "+ch+" "+Integer.toHexString(ch)+((ch=='\ufffd') ? " Unknown character" : ""));
    }

Java will have mapped any characters it cannot understand to 0xfffd the official character for unknown characters. If you see a '?' in the output, but it is not mapped to 0xfffd, it is your display font or encoding that is the problem, not Java.

You can always refer to resources in your application directly by their JNDI name as configured in the container, but if you do so, essentially you are wiring the container-specific name into your code. This has some disadvantages, for example, if you'll ever want to change the name later for some reason, you'll need to update all the references in all your applications, and then rebuild and redeploy them.

<resource-ref> introduces another layer of indirection: you specify the name you want to use in the web.xml, and, depending on the container, provide a binding in a container-specific configuration file.

So here's what happens: let's say you want to lookup the java:comp/env/jdbc/primaryDB name. The container finds that web.xml has a <resource-ref> element for jdbc/primaryDB, so it will look into the container-specific configuration, that contains something similar to the following:

<resource-ref>
  <res-ref-name>jdbc/primaryDB</res-ref-name>
  <jndi-name>jdbc/PrimaryDBInTheContainer</jndi-name>
</resource-ref>

Finally, it returns the object registered under the name of jdbc/PrimaryDBInTheContainer.

The idea is that specifying resources in the web.xml has the advantage of separating the developer role from the deployer role. In other words, as a developer, you don't have to know what your required resources are actually called in production, and as the guy deploying the application, you will have a nice list of names to map to real resources.

As dowski suggested, you could use WMI to get printer properties. The following code displays all properties for a given printer name. Among them you will find: PrinterStatus, Comment, Location, DriverName, PortName, etc.

using System.Management;

...

string printerName = "YourPrinterName";
string query = string.Format("SELECT * from Win32_Printer WHERE Name LIKE '%{0}'", printerName);

using (ManagementObjectSearcher searcher = new ManagementObjectSearcher(query))
using (ManagementObjectCollection coll = searcher.Get())
{
    try
    {
        foreach (ManagementObject printer in coll)
        {
            foreach (PropertyData property in printer.Properties)
            {
                Console.WriteLine(string.Format("{0}: {1}", property.Name, property.Value));
            }
        }
    }
    catch (ManagementException ex)
    {
        Console.WriteLine(ex.Message);
    }
}

I had the same problem with bootstrap. I solved with both outline and box-shadow

.btn:focus, .btn.focus {
    outline: none !important;
    box-shadow: 0 0 0 0 rgba(0, 123, 255, 0) !important; // or none
}

Microsoft SQL Date Formats

CONVERT(DateTime, DateField, 104)

You can use the start command to do much the same thing as ShellExecute. For example

 start "" http://www.stackoverflow.com

This will launch whatever browser is the default browser, so won't necessarily launch Internet Explorer.

You could also use the <figure> element to link a heading to your list like this:

<figure>
    <figcaption>My favorite fruits</figcaption>    
       <ul>
          <li>Banana</li>
          <li>Orange</li>
          <li>Chocolate</li>
       </ul>
</figure>

Source: https://www.w3.org/TR/2017/WD-html53-20171214/single-page.html#the-li-element (Example 162)

SearchDialog or SearchWidget ?

When it comes to implement a search functionality there are two suggested approach by official Android Developer Documentation.
You can either use a SearchDialog or a SearchWidget.
I am going to explain the implementation of Search functionality using SearchWidget.

How to do it with Search widget ?

I will explain search functionality in a RecyclerView using SearchWidget. It's pretty straightforward.

Just follow these 5 Simple steps

1) Add searchView item in the menu

You can add SearchView can be added as actionView in menu using

app:useActionClass = "android.support.v7.widget.SearchView" .

<menu xmlns:android="http://schemas.android.com/apk/res/android"
   xmlns:app="http://schemas.android.com/apk/res-auto"
   xmlns:tools="http://schemas.android.com/tools"
   tools:context="rohksin.com.searchviewdemo.MainActivity">
   <item
       android:id="@+id/searchBar"
       app:showAsAction="always"
       app:actionViewClass="android.support.v7.widget.SearchView"
   />
</menu>

2) Set up SerchView Hint text, listener etc

You should initialize SearchView in the onCreateOptionsMenu(Menu menu) method.

  @Override
  public boolean onCreateOptionsMenu(Menu menu) {
     // Inflate the menu; this adds items to the action bar if it is present.
        getMenuInflater().inflate(R.menu.menu_main, menu);

        MenuItem searchItem = menu.findItem(R.id.searchBar);

        SearchView searchView = (SearchView) searchItem.getActionView();
        searchView.setQueryHint("Search People");
        searchView.setOnQueryTextListener(this);
        searchView.setIconified(false);

        return true;
   }

3) Implement SearchView.OnQueryTextListener in your Activity

OnQueryTextListener has two abstract methods

1. onQueryTextSubmit(String query)
2. onQueryTextChange(String newText

So your Activity skeleton would look like this

YourActivity extends AppCompatActivity implements SearchView.OnQueryTextListener{

     public boolean onQueryTextSubmit(String query)

     public boolean onQueryTextChange(String newText) 

}

4) Implement SearchView.OnQueryTextListener

You can provide the implementation for the abstract methods like this

public boolean onQueryTextSubmit(String query) {

    // This method can be used when a query is submitted eg. creating search history using SQLite DB

    Toast.makeText(this, "Query Inserted", Toast.LENGTH_SHORT).show();
    return true;
}

@Override
public boolean onQueryTextChange(String newText) {

    adapter.filter(newText);
    return true;
}

5) Write a filter method in your RecyclerView Adapter.

Most important part. You can write your own logic to perform search.
Here is mine. This snippet shows the list of Name which contains the text typed in the SearchView

public void filter(String queryText)
{
    list.clear();

    if(queryText.isEmpty())
    {
       list.addAll(copyList);
    }
    else
    {

       for(String name: copyList)
       {
           if(name.toLowerCase().contains(queryText.toLowerCase()))
           {
              list.add(name);
           }
       }

    }

   notifyDataSetChanged();
}

Relevant link:

Full working code on SearchView with an SQLite database in this Music App

Atomic property can be accessed by only one thread at a time. It is thread safe. Default is atomic .Please note that there is no keyword atomic

Nonatomic means multiple thread can access the item .It is thread unsafe

So one should be very careful while using atomic .As it affect the performance of your code

Simplest solution for me is using watchdog's tool watchmedo

From https://pypi.python.org/pypi/watchdog I now have a process that looks up the sql files in a directory and executes them if necessary.

watchmedo shell-command \
--patterns="*.sql" \
--recursive \
--command='~/Desktop/load_files_into_mysql_database.sh' \
.

After generation of woff files, you have to define font-family, which can be used later in all your css styles. Below is the code to define font families (for normal, bold, bold-italic, italic) typefaces. It is assumed, that there are 4 *.woff files (for mentioned typefaces), placed in fonts subdirectory.

In CSS code:

@font-face {
    font-family: "myfont";
    src: url("fonts/awesome-font.woff") format('woff');
}

@font-face {
    font-family: "myfont";
    src: url("fonts/awesome-font-bold.woff") format('woff');
    font-weight: bold;
}

@font-face {
    font-family: "myfont";
    src: url("fonts/awesome-font-boldoblique.woff") format('woff');
    font-weight: bold;
    font-style: italic;
}

@font-face {
    font-family: "myfont";
    src: url("fonts/awesome-font-oblique.woff") format('woff');
    font-style: italic;
}

After having that definitions, you can just write, for example,

In HTML code:

<div class="mydiv">
    <b>this will be written with awesome-font-bold.woff</b>
    <br/>
    <b><i>this will be written with awesome-font-boldoblique.woff</i></b>
    <br/>
    <i>this will be written with awesome-font-oblique.woff</i>
    <br/>
    this will be written with awesome-font.woff
</div>

In CSS code:

.mydiv {
    font-family: myfont
}

The good tool for generation woff files, which can be included in CSS stylesheets is located here. Not all woff files work correctly under latest Firefox versions, and this generator produces 'correct' fonts.

If you don't want to reformat the part of the line that you don't chop off, the best solution I can think of is written in my answer in:

How to print all the columns after a particular number using awk?

It chops what is before the given field number N, and prints all the rest of the line, including field number N and maintaining the original spacing (it does not reformat). It doesn't mater if the string of the field appears also somewhere else in the line.

Define a function:

fromField () { 
awk -v m="\x01" -v N="$1" '{$N=m$N; print substr($0,index($0,m)+1)}'
}

And use it like this:

$ echo "  bat   bi       iru   lau bost   " | fromField 3
iru   lau bost   
$ echo "  bat   bi       iru   lau bost   " | fromField 2
bi       iru   lau bost 

Output maintains everything, including trailing spaces

In you particular case:

svn status | grep '\!' | fromField 2 > removedProjs

If your file/stream does not contain new-line characters in the middle of the lines (you could be using a different Record Separator), you can use:

awk -v m="\x0a" -v N="3" '{$N=m$N ;print substr($0, index($0,m)+1)}'

The first case will fail only in files/streams that contain the rare hexadecimal char number 1

smtp port and socketFactory has to be change

    String to = "[email protected]";
    String subject = "subject"
    String msg ="email text...."
    final String from ="[email protected]"
    final  String password ="senderPassword"


    Properties props = new Properties();  
    props.setProperty("mail.transport.protocol", "smtp");     
    props.setProperty("mail.host", "smtp.gmail.com");  
    props.put("mail.smtp.auth", "true");  
    props.put("mail.smtp.port", "465");  
    props.put("mail.debug", "true");  
    props.put("mail.smtp.socketFactory.port", "465");  
    props.put("mail.smtp.socketFactory.class","javax.net.ssl.SSLSocketFactory");  
    props.put("mail.smtp.socketFactory.fallback", "false");  
    Session session = Session.getDefaultInstance(props,  
    new javax.mail.Authenticator() {
       protected PasswordAuthentication getPasswordAuthentication() {  
       return new PasswordAuthentication(from,password);  
   }  
   });  

   //session.setDebug(true);  
   Transport transport = session.getTransport();  
   InternetAddress addressFrom = new InternetAddress(from);  

   MimeMessage message = new MimeMessage(session);  
   message.setSender(addressFrom);  
   message.setSubject(subject);  
   message.setContent(msg, "text/plain");  
   message.addRecipient(Message.RecipientType.TO, new InternetAddress(to));  

   transport.connect();  
   Transport.send(message);  
   transport.close();
   }  

hope it will work for you..

If you're using Python 2.5, this won't work, but for people using 2.6 or 2.7, try

from __future__ import print_function

print("abcd", end='')
print("efg")

results in

abcdefg

For those using 3.x, this is already built-in.

In Android Studio 1.2.1.1

Just copy the image and paste the image into the app > res > drawable folder and it will shows you "Choose Destination Directory" popup screen as shown below screen

Now you can select option whatever resolution you want to place and if you want to view the those image into the folders then simply right click on the drawable folder > select copy paths option and open it. It will help you.

The delete operator deallocates memory and calls the destructor for a single object created with new.

The delete [] operator deallocates memory and calls destructors for an array of objects created with new [].

Using delete on a pointer returned by new [] or delete [] on a pointer returned by new results in undefined behavior.

I have a feeling that if you have a corporate phone, your corporation IT might also be blocking USB Debugging. I've tried all the different connection modes and the USB Debugging option remains firmly greyed out.

I'm trying to get in to enable the BATTERY_STATS for GSam Monitor Pro, but I think it's disable through the Airwatch MDM software my company makes me use. They pay for it so I guess I'm stuck.

Try this function for get root directory path:

get_template_directory_uri();

I've found using cmd works well as an alternative, especially when you need to pipe the output from the called application (espeically when it doesn't have built in logging, unlike msbuild)

cmd /C "$msbuild $args" >> $outputfile

private - encapsulations in class/scope/struct ect'.

internal - encapsulation in assemblies.

I think, the difference is in usage patterns.

I would prefer .on over .click because the former can use less memory and work for dynamically added elements.

Consider the following html:

<html>
    <button id="add">Add new</button>
    <div id="container">
        <button class="alert">alert!</button>
    </div>
</html>

where we add new buttons via

$("button#add").click(function() {
    var html = "<button class='alert'>Alert!</button>";
    $("button.alert:last").parent().append(html);
});

and want "Alert!" to show an alert. We can use either "click" or "on" for that.

When we use click

$("button.alert").click(function() {
    alert(1);
});

with the above, a separate handler gets created for every single element that matches the selector. That means

1. many matching elements would create many identical handlers and thus increase memory footprint
2. dynamically added items won't have the handler - ie, in the above html the newly added "Alert!" buttons won't work unless you rebind the handler.

When we use .on

$("div#container").on('click', 'button.alert', function() {
    alert(1);
});

with the above, a single handler for all elements that match your selector, including the ones created dynamically.

...another reason to use .on

As Adrien commented below, another reason to use .on is namespaced events.

If you add a handler with .on("click", handler) you normally remove it with .off("click", handler) which will remove that very handler. Obviously this works only if you have a reference to the function, so what if you don't ? You use namespaces:

$("#element").on("click.someNamespace", function() { console.log("anonymous!"); });

with unbinding via

$("#element").off("click.someNamespace");

My case was to print horizontal (landscape) summary section - so:

}).then((canvas) => {
  const img = canvas.toDataURL('image/jpg');
  new jsPDF({
        orientation: 'l', // landscape
        unit: 'pt', // points, pixels won't work properly
        format: [canvas.width, canvas.height] // set needed dimensions for any element
  });
  pdf.addImage(img, 'JPEG', 0, 0, canvas.width, canvas.height);
  pdf.save('your-filename.pdf');
});

.headerDivider {
     border-left:1px solid #38546d; 
     border-right:1px solid #16222c; 
     height:80px;
     position:absolute;
     right:249px;
     top:10px; 
}

<div class="headerDivider"></div>

You can use it like this:

$(document).ready(function(){

    setTimeout("swapImages()",1000);

    function swapImages(){

        var active = $('.active'); 
        var next = ($('.active').next().length > 0) ? $('.active').next() : $('#siteNewsHead img:first');

        active.removeClass('active');
        next.addClass('active');
        setTimeout("swapImages()",1000);
}

});

I noticed that you can also get errors if you don't specify the angles correctly, even when using glm::rotate(Model, angle_in_degrees, glm::vec3(x, y, z)) you still might run into problems. The fix I found for this was specifying the type as glm::rotate(Model, (glm::mediump_float)90, glm::vec3(x, y, z)) instead of just saying glm::rotate(Model, 90, glm::vec3(x, y, z))

Or just write the second argument, the angle in radians (previously in degrees), as a float with no cast needed such as in:

glm::mat4 rotationMatrix = glm::rotate(glm::mat4(1.0f), 3.14f, glm::vec3(1.0));

You can add glm::radians() if you want to keep using degrees. And add the includes:

#include "glm/glm.hpp"
#include "glm/gtc/matrix_transform.hpp"

You should use the OpenFileDialog class like this

Dim fd As OpenFileDialog = New OpenFileDialog() 
Dim strFileName As String

fd.Title = "Open File Dialog"
fd.InitialDirectory = "C:\"
fd.Filter = "All files (*.*)|*.*|All files (*.*)|*.*"
fd.FilterIndex = 2
fd.RestoreDirectory = True

If fd.ShowDialog() = DialogResult.OK Then
   strFileName = fd.FileName
End If

Then you can use the File class.

For example String.Format("{0:0,0}", 1); returns 01, for me is not valid

This works for me

19950000.ToString("#,#", CultureInfo.InvariantCulture));

output 19,950,000

http://example.com/ may resolve to a different VirtualHost than https://example.com/ (which, as the Host header is not sent, responds to the default for that IP), so the two are treated as separate domains and thus subject to crossdomain JS restrictions.

JSON callbacks may let you avoid this.

You need a special type of function known as a table valued function. Below is a somewhat long-winded example that builds a date dimension for a data warehouse. Note the returns clause that defines a table structure. You can insert anything into the table variable (@DateHierarchy in this case) that you want, including building a temporary table and copying the contents into it.

if object_id ('ods.uf_DateHierarchy') is not null
    drop function ods.uf_DateHierarchy
go

create function ods.uf_DateHierarchy (
       @DateFrom datetime
      ,@DateTo   datetime
) returns @DateHierarchy table (
        DateKey           datetime
       ,DisplayDate       varchar (20)
       ,SemanticDate      datetime
       ,MonthKey          int     
       ,DisplayMonth      varchar (10)
       ,FirstDayOfMonth   datetime
       ,QuarterKey        int
       ,DisplayQuarter    varchar (10)
       ,FirstDayOfQuarter datetime
       ,YearKey           int
       ,DisplayYear       varchar (10)
       ,FirstDayOfYear    datetime
) as begin
    declare @year            int
           ,@quarter         int
           ,@month           int
           ,@day             int
           ,@m1ofqtr         int
           ,@DisplayDate     varchar (20)
           ,@DisplayQuarter  varchar (10)
           ,@DisplayMonth    varchar (10)
           ,@DisplayYear     varchar (10)
           ,@today           datetime
           ,@MonthKey        int
           ,@QuarterKey      int
           ,@YearKey         int
           ,@SemanticDate    datetime
           ,@FirstOfMonth    datetime
           ,@FirstOfQuarter  datetime
           ,@FirstOfYear     datetime
           ,@MStr            varchar (2)
           ,@QStr            varchar (2)
           ,@Ystr            varchar (4)
           ,@DStr            varchar (2)
           ,@DateStr         varchar (10)


    -- === Previous ===================================================
    -- Special placeholder date of 1/1/1800 used to denote 'previous'
    -- so that naive date calculations sort and compare in a sensible
    -- order.
    --
    insert @DateHierarchy (
         DateKey
        ,DisplayDate
        ,SemanticDate
        ,MonthKey
        ,DisplayMonth
        ,FirstDayOfMonth
        ,QuarterKey
        ,DisplayQuarter
        ,FirstDayOfQuarter
        ,YearKey
        ,DisplayYear
        ,FirstDayOfYear
    ) values (
         '1800-01-01'
        ,'Previous'
        ,'1800-01-01'
        ,180001
        ,'Prev'
        ,'1800-01-01'
        ,18001
        ,'Prev'
        ,'1800-01-01'
        ,1800
        ,'Prev'
        ,'1800-01-01'
    )

    -- === Calendar Dates =============================================
    -- These are generated from the date range specified in the input
    -- parameters.
    --
    set @today = @Datefrom
    while @today <= @DateTo begin

        set @year = datepart (yyyy, @today)
        set @month = datepart (mm, @today)
        set @day = datepart (dd, @today)
        set @quarter = case when @month in (1,2,3) then 1
                            when @month in (4,5,6) then 2
                            when @month in (7,8,9) then 3
                            when @month in (10,11,12) then 4
                        end
        set @m1ofqtr = @quarter * 3 - 2 

        set @DisplayDate = left (convert (varchar, @today, 113), 11)
        set @SemanticDate = @today
        set @MonthKey = @year * 100 + @month
        set @DisplayMonth = substring (convert (varchar, @today, 113), 4, 8)
        set @Mstr = right ('0' + convert (varchar, @month), 2)
        set @Dstr = right ('0' + convert (varchar, @day), 2)
        set @Ystr = convert (varchar, @year)
        set @DateStr = @Ystr + '-' + @Mstr + '-01'
        set @FirstOfMonth = convert (datetime, @DateStr, 120)
        set @QuarterKey = @year * 10 + @quarter
        set @DisplayQuarter = 'Q' + convert (varchar, @quarter) + ' ' +
                                    convert (varchar, @year)
        set @QStr = right ('0' + convert (varchar, @m1ofqtr), 2)   
        set @DateStr = @Ystr + '-' + @Qstr + '-01' 
        set @FirstOfQuarter = convert (datetime, @DateStr, 120)
        set @YearKey = @year
        set @DisplayYear = convert (varchar, @year)
        set @DateStr = @Ystr + '-01-01'
        set @FirstOfYear = convert (datetime, @DateStr)


        insert @DateHierarchy (
             DateKey
            ,DisplayDate
            ,SemanticDate
            ,MonthKey
            ,DisplayMonth
            ,FirstDayOfMonth
            ,QuarterKey
            ,DisplayQuarter
            ,FirstDayOfQuarter
            ,YearKey
            ,DisplayYear
            ,FirstDayOfYear
        ) values (
             @today
            ,@DisplayDate
            ,@SemanticDate
            ,@Monthkey
            ,@DisplayMonth
            ,@FirstOfMonth
            ,@QuarterKey
            ,@DisplayQuarter
            ,@FirstOfQuarter
            ,@YearKey
            ,@DisplayYear
            ,@FirstOfYear
        )

        set @today = dateadd (dd, 1, @today)
    end

    -- === Specials ===================================================
    -- 'Ongoing', 'Error' and 'Not Recorded' set two years apart to
    -- avoid accidental collisions on 'Next Year' calculations.
    --
    insert @DateHierarchy (
         DateKey
        ,DisplayDate
        ,SemanticDate
        ,MonthKey
        ,DisplayMonth
        ,FirstDayOfMonth
        ,QuarterKey
        ,DisplayQuarter
        ,FirstDayOfQuarter
        ,YearKey
        ,DisplayYear
        ,FirstDayOfYear
    ) values (
         '9000-01-01'
        ,'Ongoing'
        ,'9000-01-01'
        ,900001
        ,'Ong.'
        ,'9000-01-01'
        ,90001
        ,'Ong.'
        ,'9000-01-01'
        ,9000
        ,'Ong.'
        ,'9000-01-01'
    )

    insert @DateHierarchy (
         DateKey
        ,DisplayDate
        ,SemanticDate
        ,MonthKey
        ,DisplayMonth
        ,FirstDayOfMonth
        ,QuarterKey
        ,DisplayQuarter
        ,FirstDayOfQuarter
        ,YearKey
        ,DisplayYear
        ,FirstDayOfYear
    ) values (
         '9100-01-01'
        ,'Error'
        ,null
        ,910001
        ,'Error'
        ,null
        ,91001
        ,'Error'
        ,null
        ,9100
        ,'Err'
        ,null
    )

    insert @DateHierarchy (
         DateKey
        ,DisplayDate
        ,SemanticDate
        ,MonthKey
        ,DisplayMonth
        ,FirstDayOfMonth
        ,QuarterKey
        ,DisplayQuarter
        ,FirstDayOfQuarter
        ,YearKey
        ,DisplayYear
        ,FirstDayOfYear
    ) values (
         '9200-01-01'
        ,'Not Recorded'
        ,null
        ,920001
        ,'N/R'
        ,null
        ,92001
        ,'N/R'
        ,null
        ,9200
        ,'N/R'
        ,null
    )

    return
end

go

Here is a code to draw a fill elipse, you can use the same method but replacing de xcenter and y center with radius

void drawFilledelipse(GLfloat x, GLfloat y, GLfloat xcenter,GLfloat ycenter) {
    int i;
    int triangleAmount = 20; //# of triangles used to draw circle

    //GLfloat radius = 0.8f; //radius
    GLfloat twicePi = 2.0f * PI;

    glBegin(GL_TRIANGLE_FAN);
    glVertex2f(x, y); // center of circle
    for (i = 0; i <= triangleAmount; i++) {
        glVertex2f(
            x + ((xcenter+1)* cos(i * twicePi / triangleAmount)),
            y + ((ycenter-1)* sin(i * twicePi / triangleAmount))
        );
    }
    glEnd();
}

It appears this can be done. I'm unable to determine the version of GCC that it was added, but it was sometime before June 2010.

Here's an example:

#pragma GCC diagnostic error "-Wuninitialized"
    foo(a);         /* error is given for this one */
#pragma GCC diagnostic push
#pragma GCC diagnostic ignored "-Wuninitialized"
    foo(b);         /* no diagnostic for this one */
#pragma GCC diagnostic pop
    foo(c);         /* error is given for this one */
#pragma GCC diagnostic pop
    foo(d);         /* depends on command line options */

Try this:

jQuery('body').after('<a id="Download" target="_blank">Click Here</a>');

var canvas = document.getElementById('canvasID');
var ctx = canvas.getContext('2d');

document.getElementById('Download').addEventListener('click', function() {
    downloadCanvas(this, 'canvas', 'test.png');
}, false);

function downloadCanvas(link, canvasId, filename) {
    link.href = document.getElementById(canvasId).toDataURL();
    link.Download = filename;
}

You can just put this code in console in firefox or chrom and after changed your canvas tag ID in this above script and run this script in console.

After the execute this code you will see the link as text "click here" at bottom of the html page. click on this link and open the canvas drawing as a PNG image in new window save the image.

Have you tried with the custom format "#,##0.##" ?

If you are a linux user Update node to a later version by running

sudo apt update

 sudo apt install build-essential checkinstall libssl-dev

curl -o- https://raw.githubusercontent.com/creationix/nvm/v0.35.1/install.sh | bash

nvm --version

nvm ls

nvm ls-remote

nvm install [version.number]

this should solve your problem

Strring temp="facebook",temp="whatsapp",temp="instagram",temp="googleplus",temp="share";

    if(temp.equals("facebook"))
    {
        Intent intent = getPackageManager().getLaunchIntentForPackage("com.facebook.katana");
        if (intent != null) {

            Intent shareIntent = new Intent(android.content.Intent.ACTION_SEND);
            shareIntent.setType("image/png");
            shareIntent.putExtra(Intent.EXTRA_STREAM, Uri.parse("file://" + "/sdcard/folder name/abc.png"));
            shareIntent.setFlags(Intent.FLAG_GRANT_READ_URI_PERMISSION);
            shareIntent.setPackage("com.facebook.katana");
            startActivity(shareIntent);

        }
        else
        {
            Toast.makeText(MainActivity.this, "Facebook require..!!", Toast.LENGTH_SHORT).show();
        }
    }
    if(temp.equals("whatsapp"))
    {

        try {
            File filePath = new File("/sdcard/folder name/abc.png");
            final ComponentName name = new ComponentName("com.whatsapp", "com.whatsapp.ContactPicker");
            Intent oShareIntent = new Intent();
            oShareIntent.setComponent(name);
            oShareIntent.setType("text/plain");
            oShareIntent.putExtra(android.content.Intent.EXTRA_TEXT, "Website : www.google.com");
            oShareIntent.putExtra(Intent.EXTRA_STREAM, Uri.fromFile(filePath));
            oShareIntent.setType("image/jpeg");
            oShareIntent.addFlags(Intent.FLAG_GRANT_READ_URI_PERMISSION);
            MainActivity.this.startActivity(oShareIntent);


        } catch (Exception e) {
            Toast.makeText(MainActivity.this, "WhatsApp require..!!", Toast.LENGTH_SHORT).show();
        }
    }
    if(temp.equals("instagram"))
    {
        Intent intent = getPackageManager().getLaunchIntentForPackage("com.instagram.android");
        if (intent != null)
        {
            File filePath =new File("/sdcard/folder name/"abc.png");
            Intent shareIntent = new Intent(android.content.Intent.ACTION_SEND);
            shareIntent.setType("image");
            shareIntent.putExtra(Intent.EXTRA_STREAM, Uri.parse("file://" + "/sdcard/Chitranagari/abc.png"));
            shareIntent.setPackage("com.instagram.android");
            startActivity(shareIntent);

        }
        else
        {
            Toast.makeText(MainActivity.this, "Instagram require..!!", Toast.LENGTH_SHORT).show();

        }
    }
    if(temp.equals("googleplus"))
    {

        try
        {

            Calendar c = Calendar.getInstance();
            SimpleDateFormat sdf = new SimpleDateFormat("dd-MM-yyyy hh:mm:ss");
            String strDate = sdf.format(c.getTime());
            Intent shareIntent = ShareCompat.IntentBuilder.from(MainActivity.this).getIntent();
            shareIntent.setType("text/plain");
            shareIntent.putExtra(Intent.EXTRA_TEXT, "Website : www.google.com");
            shareIntent.putExtra(Intent.EXTRA_STREAM, Uri.parse("file://" + "/sdcard/folder name/abc.png"));
            shareIntent.setPackage("com.google.android.apps.plus");
            shareIntent.setAction(Intent.ACTION_SEND);
            startActivity(shareIntent);
        }catch (Exception e)
        {
            e.printStackTrace();
            Toast.makeText(MainActivity.this, "Googleplus require..!!", Toast.LENGTH_SHORT).show();
        }
    }
    if(temp.equals("share")) {

        File filePath =new File("/sdcard/folder name/abc.png");  //optional //internal storage
        Intent shareIntent = new Intent();
        shareIntent.setAction(Intent.ACTION_SEND);
        shareIntent.putExtra(Intent.EXTRA_TEXT, "Website : www.google.com");
        shareIntent.putExtra(Intent.EXTRA_STREAM, Uri.fromFile(filePath));  //optional//use this when you want to send an image
        shareIntent.setType("image/jpeg");
        shareIntent.addFlags(Intent.FLAG_GRANT_READ_URI_PERMISSION);
        startActivity(Intent.createChooser(shareIntent, "send"));

    }

My mistake was that I was keeping the Javascript file ( tag) above the html declaration.

It worked by placing the js script tag at the bottom of the body inside the body. (I did not the script on load of the page.)

My Apache had something like this in httpd.conf. Just change the ErrorLog and CustomLog settings

<VirtualHost myvhost:80>
    ServerAdmin [email protected]
    DocumentRoot /opt/web
    ServerName myvhost
    ErrorLog logs/myvhost-error_log
    CustomLog logs/myvhost-access_log common
</VirtualHost>

Try to use datepicker/ timepicker instead of datetimepicker like:

replace:

$('#datetimepicker1').datetimepicker();

with:

$('#datetimepicker1').datepicker(); // or timepicker for time picker

Just to complete the existing answers, I'd suggest using select instead of nonblocking sockets. The point is that nonblocking sockets complicate stuff (except perhaps sending), so I'd say there is no reason to use them at all. If you regularly have the problem that your app is blocked waiting for IO, I would also consider doing the IO in a separate thread in the background.

If you have a Mac and TextMate - An easy alternative for formatting Javascript is:

1. Open the file with Textmate.
2. Click on > Bundles > JavaScript > Reformat Document
3. Crack open a beer.

One thing that confused me a little bit with this command is that if redis-cli fails to connect using the passed connection string it will still put you in the redis-cli shell, i.e:

redis-cli
Could not connect to Redis at 127.0.0.1:6379: Connection refused
not connected> 

You'll then need to exit to get yourself out of the shell. I wasn't paying much attention here and kept passing in new redis-cli commands wondering why the command wasn't using my passed connection string.

I have just recently been required to work on an application which involved the parsing of an XML document and I agree with Jon Galloway that the LINQ to XML based approach is, in my opinion, the best. I did however have to dig a little to find usable examples, so without further ado, here are a few!

Any comments welcome as this code works but may not be perfect and I would like to learn more about parsing XML for this project!

public void ParseXML(string filePath)  
{  
    // create document instance using XML file path
    XDocument doc = XDocument.Load(filePath);

    // get the namespace to that within of the XML (xmlns="...")
    XElement root = doc.Root;
    XNamespace ns = root.GetDefaultNamespace();

    // obtain a list of elements with specific tag
    IEnumerable<XElement> elements = from c in doc.Descendants(ns + "exampleTagName") select c;

    // obtain a single element with specific tag (first instance), useful if only expecting one instance of the tag in the target doc
    XElement element = (from c in doc.Descendants(ns + "exampleTagName" select c).First();

    // obtain an element from within an element, same as from doc
    XElement embeddedElement = (from c in element.Descendants(ns + "exampleEmbeddedTagName" select c).First();

    // obtain an attribute from an element
    XAttribute attribute = element.Attribute("exampleAttributeName");
}

With these functions I was able to parse any element and any attribute from an XML file no problem at all!

Tested in iphone. Just use this css on target element container and it will change the scrolling behaviour, which stops when finger leaves the screen.

-webkit-overflow-scrolling: auto

https://developer.mozilla.org/en-US/docs/Web/CSS/-webkit-overflow-scrolling

I came here looking for the answer to the same question. But I found a much better answer myself.

In the tables list, if you right-click on the table name there is a suite of CRUD script generation options in "Send to SQL Editor". You can select multiple tables and take the same approach too.

My version of MySQL Workbench: 5.2.37

The spread Syntax

You can use the spread syntax, an Array Initializer introduced in ECMAScript 2015 (ES6) standard:

var arr = [...str];

Examples

function a() {_x000D_
    return arguments;_x000D_
}_x000D_
_x000D_
var str = 'Hello World';_x000D_
_x000D_
var arr1 = [...str],_x000D_
    arr2 = [...'Hello World'],_x000D_
    arr3 = new Array(...str),_x000D_
    arr4 = a(...str);_x000D_
_x000D_
console.log(arr1, arr2, arr3, arr4);

The first three result in:

["H", "e", "l", "l", "o", " ", "W", "o", "r", "l", "d"]

The last one results in

{0: "H", 1: "e", 2: "l", 3: "l", 4: "o", 5: " ", 6: "W", 7: "o", 8: "r", 9: "l", 10: "d"}

Browser Support

Check the ECMAScript ES6 compatibility table.

Further reading

• MDN: Spread operator
• ECMAScript 2015 (ES6): 12.2.5 Array Initializer

spread is also referenced as "splat" (e.g. in PHP or Ruby or as "scatter" (e.g. in Python).

Demo

Try before buy

First, you don't need to define both of those locations. Just use classpath:config/properties/database.properties. In a WAR, WEB-INF/classes is a classpath entry, so it will work just fine.

After that, I think what you mean is you want to use Spring's schema-based configuration to create a configurer. That would go like this:

<context:property-placeholder location="classpath:config/properties/database.properties"/>

Note that you don't need to "ignoreResourceNotFound" anymore. If you need to define the properties separately using util:properties:

<context:property-placeholder properties-ref="jdbcProperties" ignore-resource-not-found="true"/>

There's usually not any reason to define them separately, though.

The difference between an operating system and a kernel:

The kernel is a part of an operating system. The operating system is the software package that communicates directly to the hardware and our application. The kernel is the lowest level of the operating system. The kernel is the main part of the operating system and is responsible for translating the command into something that can be understood by the computer. The main functions of the kernel are:

1. memory management
2. network management
3. device driver
4. file management
5. process management

I found it is better to use the command Serial.readString() to replace the Serial.read() to obtain the continuous I/O for Arduino.

You can use as_json method. It'll convert your object into hash.

But, that hash will come as a value to the name of that object as a key. In your case,

{'gift' => {'name' => 'book', 'price' => 15.95 }}

If you need a hash that's stored in the object use as_json(root: false). I think by default root will be false. For more info refer official ruby guide

http://api.rubyonrails.org/classes/ActiveModel/Serializers/JSON.html#method-i-as_json

You could do

telnet stackoverflow.com 80

And then paste

GET /questions HTTP/1.0
Host: stackoverflow.com


# add the 2 empty lines above but not this one

Here is a transcript

$ telnet stackoverflow.com 80
Trying 151.101.65.69...
Connected to stackoverflow.com.
Escape character is '^]'.
GET /questions HTTP/1.0
Host: stackoverflow.com

HTTP/1.1 200 OK
Content-Type: text/html; charset=utf-8
...

If none of the other answers work for you, and you received this error:

mysqld_safe Logging to '/var/log/mysql/error.log'.
mysqld_safe Directory '/var/run/mysqld' for UNIX socket file don't exists.
[1]+  Exit 1                  sudo mysqld_safe --skip-grant-tables

Follow the below commands step by step until you reset your password:

# Stop Your Server First
sudo service mysql stop

# Make MySQL service directory.
sudo mkdir /var/run/mysqld

# Give MySQL permission to work with the created directory
sudo chown mysql: /var/run/mysqld

# Start MySQL, without permission and network checking
sudo mysqld_safe --skip-grant-tables --skip-networking &

# Log in to your server without any password.
mysql -u root mysql


# Update the password for the root user:
UPDATE mysql.user SET authentication_string=PASSWORD('YourNewPasswordBuddy'), plugin='mysql_native_password' WHERE User='root' AND Host='localhost';

#if you omit (AND Host='localhost') section, it updates the root pass regardless of its host

FLUSH PRIVILEGES;
EXIT;

#kill mysqld_safe process
sudo service mysql restart

#Now you can use your new password to login to your Server
mysql -u root -p

#take note for remote access you should create a remote user and then grant all privileges to that remote user

You will have to modify the below line:

<li><a href="#" data-toggle="modal" data-target="modalRegister">Register</a></li>

modalRegister is the ID and hence requires a preceding # for ID reference in html.

So, the modified html code snippet would be as follows:

<li><a href="#" data-toggle="modal" data-target="#modalRegister">Register</a></li>

Use following interface to communicate between activity and fragment

public interface BundleListener {
    void update(Bundle bundle);
    Bundle getBundle();
}

Or use following this generic listener for two way communication using interface

 /**
 * Created by Qamar4P on 10/11/2017.
 */
public interface GenericConnector<T,E> {
    T getData();
    void updateData(E data);
    void connect(GenericConnector<T,E> connector);
}

fragment show method

public static void show(AppCompatActivity activity) {
        CustomValueDialogFragment dialog = new CustomValueDialogFragment();
        dialog.connector = (GenericConnector) activity;
        dialog.show(activity.getSupportFragmentManager(),"CustomValueDialogFragment");
    }

you can cast your context to GenericConnector in onAttach(Context) too

in your activity

CustomValueDialogFragment.show(this);

in your fragment

...
@Override
    public void onCreate(@Nullable Bundle savedInstanceState) {
        super.onCreate(savedInstanceState);
        connector.connect(new GenericConnector() {
            @Override
            public Object getData() {
                return null;
            }

            @Override
            public void updateData(Object data) {

            }

            @Override
            public void connect(GenericConnector connector) {

            }
        });
    }
...
    public static void show(AppCompatActivity activity, GenericConnector connector) {
            CustomValueDialogFragment dialog = new CustomValueDialogFragment();
            dialog.connector = connector;
            dialog.show(activity.getSupportFragmentManager(),"CustomValueDialogFragment");
        }

Note: Never use it like "".toString().toString().toString(); way.

Select SUBSTRING (convert(varchar,S0.OrderDateTime,100),1,3) from your Table Name

Please add the following dependencies to pom to resolve this issue.

<dependency>
  <groupId>org.slf4j</groupId>
  <artifactId>slf4j-simple</artifactId>
  <version>1.7.25</version>
  <scope>test</scope>
</dependency>

<dependency>
  <groupId>org.slf4j</groupId>
  <artifactId>slf4j-api</artifactId>
  <version>1.7.25</version>
</dependency>

Example:

contents of the ae.csv file:

"Date, xpto 14"
"code","number","year","C"
"blab","15885","2016","Y"
"aeea","15883","1982","E"
"xpto","15884","1986","B"
"jrgg","15885","1400","A"

CREATE TABLE Tabletmp (  
    rec VARCHAR(9) 
);

For put only column 3:

LOAD DATA INFILE '/local/ae.csv' 
INTO TABLE Tabletmp
FIELDS TERMINATED BY ','
ENCLOSED BY '"'
LINES TERMINATED BY '\r\n'
IGNORE 2 LINES
(@col1, @col2, @col3, @col4, @col5)
set rec = @col3;


select * from Tabletmp;
    2016
    1982
    1986
    1400

You can use invalidate() method to change toolbar state in any place. Example:

Toolbar toolbar = (Toolbar)findViewById(R.id.my_awesome_toolbar);
setSupportActionBar(toolbar);

toolbar.setNavigationIcon(R.mipmap.arrow_white);
toolbar.invalidate();       // restore toolbar

An array is a fixed collection of same-type data that are stored contiguously and that are accessible by an index (zero based).

A string is a sequence of characters.

Hence a String[] is a collection of Strings.

For example:

String foo = "Foo";  // one instance of String
String[] foos = new String[] { "Foo1", "Foo2", "Foo3" };
String firstFoo = foos[0];  // "Foo1"

Arrays (C# Programming Guide)

Edit: So obviously there's no direct way to convert a single String to an String[] or vice-versa. Though you can use String.Split to get a String[] from a String by using a separator(for example comma).

To "convert" a String[] to a String(the opposite) you can use String.Join. You need to specify how you want to join those strings(f.e. with comma).

Here's an example:

var foos = "Foo1,Foo2,Foo3";
var fooArray = foos.Split(',');  // now you have an array of 3 strings
foos = String.Join(",", fooArray); // now you have the same as in the first line

I was looking for a CSS-only solution and found this works for iOS browsers (tested safari and chrome).

It does not have the same behavior on desktop chrome, but the pain of selecting is not as great there because you have a lot more options as a user (double-click, ctrl-a, etc):

.select-all-on-touch {
    -webkit-user-select: all;
    user-select: all;
}

>>> s = pd.Series([1,2,3,4,np.NaN,5,np.NaN])
>>> s[~s.isnull()]
0    1
1    2
2    3
3    4
5    5

update or even better approach as @DSM suggested in comments, using pandas.Series.dropna():

>>> s.dropna()
0    1
1    2
2    3
3    4
5    5

you can use Self-Executing Anonymous Functions. this code will work:

<a href="#" onClick="(function(){
    alert('Hey i am calling');
    return false;
})();return false;">click here</a>

see JSfiddle

To fill a list with seperate instances of a class, you can use a for loop in the declaration of the list. The * multiply will link each copy to the same instance.

instancelist = [ MyClass() for i in range(29)]

and then access the instances through the index of the list.

instancelist[5].attr1 = 'whamma'

You can use drawables in

app:itemTextColor app:itemIconTint

then you can control the checked state and normal state using a drawable

<android.support.design.widget.NavigationView
            android:id="@+id/nav_view"
            android:layout_width="wrap_content"
            android:layout_height="match_parent"
            android:layout_gravity="start"
            app:itemHorizontalPadding="@dimen/margin_30"
            app:itemIconTint="@drawable/drawer_item_color"
            app:itemTextColor="@drawable/drawer_item_color"
            android:theme="@style/NavigationView"
            app:headerLayout="@layout/nav_header"
            app:menu="@menu/drawer_menu">

drawer_item_color.xml

<?xml version="1.0" encoding="utf-8"?>
<selector xmlns:android="http://schemas.android.com/apk/res/android">
    <item android:color="@color/selectedColor" android:state_checked="true" />
    <item android:color="@color/normalColor" />
</selector>

In jQuery 3 and perhaps earlier versions, the following simpler config also works for individual requests:

$.ajax(
        'https://foo.bar.com,
        {
            dataType: 'json',
            xhrFields: {
                withCredentials: true
            },
            success: successFunc
        }
    );

The full error I was getting in Firefox Dev Tools -> Network tab (in the Security tab for an individual request) was:

An error occurred during a connection to foo.bar.com.SSL peer was unable to negotiate an acceptable set of security parameters.Error code: SSL_ERROR_HANDSHAKE_FAILURE_ALERT

• Create a 'popup' directive and apply it to the container of the popup content
• In the directive, wrap the content in a absolute position div along with the mask div below it.
• It is OK to move the 2 divs in the DOM tree as needed from within the directive. Any UI code is OK in the directives, including the code to position the popup in center of screen.
• Create and bind a boolean flag to controller. This flag will control visibility.
• Create scope variables that bond to OK / Cancel functions etc.

Editing to add a high level example (non functional)

<div id='popup1-content' popup='showPopup1'>
  ....
  ....
</div>


<div id='popup2-content' popup='showPopup2'>
  ....
  ....
</div>



.directive('popup', function() {
  var p = {
      link : function(scope, iElement, iAttrs){
           //code to wrap the div (iElement) with a abs pos div (parentDiv)
          // code to add a mask layer div behind 
          // if the parent is already there, then skip adding it again.
         //use jquery ui to make it dragable etc.
          scope.watch(showPopup, function(newVal, oldVal){
               if(newVal === true){
                   $(parentDiv).show();
                 } 
              else{
                 $(parentDiv).hide();
                }
          });
      }


   }
  return p;
});

Use the synaptic packet manager in order to install yacc / lex. If you are feeling more comfortable doing this on the console just do:

sudo apt-get install bison flex

There are some very nice articles on the net on how to get started with those tools. I found the article from CodeProject to be quite good and helpful (see here). But you should just try and search for "introduction to lex", there are plenty of good articles showing up.

This worked for me with a string-array named shoes loaded from the projects resources:

Spinner              spinnerCountShoes = (Spinner)findViewById(R.id.spinner_countshoes);
ArrayAdapter<String> spinnerCountShoesArrayAdapter = new ArrayAdapter<String>(
                     this,
                     android.R.layout.simple_spinner_dropdown_item, 
                     getResources().getStringArray(R.array.shoes));
spinnerCountShoes.setAdapter(spinnerCountShoesArrayAdapter);

This is my resource file (res/values/arrays.xml) with the string-array named shoes:

<?xml version="1.0" encoding="utf-8"?>
<resources>
    <string-array name="shoes">
        <item>0</item>
        <item>5</item>
        <item>10</item>
        <item>100</item>
        <item>1000</item>
        <item>10000</item>
    </string-array>
</resources>

With this method it's easier to make it multilingual (if necessary).

JSON.parse is the right way to convert a string into an object but if the string that is parsed is not object or if the string is not correct then it will throw an error that will cause the rest of the code to break so it is ideal to wrap the JSON.parse function inside try-catch like

try{
   let obj = JSON.parse(string);
}catch(err){
   console.log(err);
}

You want this?

html,_x000D_
body {_x000D_
  margin: 0;_x000D_
  padding: 0;_x000D_
}_x000D_
_x000D_
.container {_x000D_
  display: grid;_x000D_
  grid-template-columns: 1fr 1fr;_x000D_
  grid-template-rows: 100vh;_x000D_
  grid-gap: 0px 0px;_x000D_
}_x000D_
_x000D_
.left_bg {_x000D_
  display: subgrid;_x000D_
  background-color: #3498db;_x000D_
  grid-column: 1 / 1;_x000D_
  grid-row: 1 / 1;_x000D_
  z-index: 0;_x000D_
}_x000D_
_x000D_
.right_bg {_x000D_
  display: subgrid;_x000D_
  background-color: #ecf0f1;_x000D_
  grid-column: 2 / 2;_x000D_
  grid_row: 1 / 1;_x000D_
  z-index: 0;_x000D_
}_x000D_
_x000D_
.text {_x000D_
  font-family: Raleway;_x000D_
  font-size: large;_x000D_
  text-align: center;_x000D_
}

<div class="container">_x000D_
  <!--everything on the page-->_x000D_
_x000D_
  <div class="left_bg">_x000D_
    <!--left background color of the page-->_x000D_
    <div class="text">_x000D_
      <!--left side text content-->_x000D_
      <p>Review my stuff</p>_x000D_
    </div>_x000D_
  </div>_x000D_
_x000D_
  <div class="right_bg">_x000D_
    <!--right background color of the page-->_x000D_
    <div class="text">_x000D_
      <!--right side text content-->_x000D_
      <p>Hire me!</p>_x000D_
    </div>_x000D_
  </div>_x000D_
</div>

Yes. You need to prefix the table name with "#" (hash) to create temporary tables.

If you do NOT need the table later, go ahead & create it. Temporary Tables are very much like normal tables. However, it gets created in tempdb. Also, it is only accessible via the current session i.e. For EG: if another user tries to access the temp table created by you, he'll not be able to do so.

"##" (double-hash creates "Global" temp table that can be accessed by other sessions as well.

Refer the below link for the Basics of Temporary Tables: http://www.codeproject.com/Articles/42553/Quick-Overview-Temporary-Tables-in-SQL-Server-2005

If the content of your table is less than 5000 rows & does NOT contain data types such as nvarchar(MAX), varbinary(MAX), consider using Table Variables.

They are the fastest as they are just like any other variables which are stored in the RAM. They are stored in tempdb as well, not in RAM.

DECLARE @ItemBack1 TABLE
(
 column1 int,
 column2 int,
 someInt int,
 someVarChar nvarchar(50)
);

INSERT INTO @ItemBack1
SELECT column1, 
       column2, 
       someInt, 
       someVarChar 
  FROM table2
 WHERE table2.ID = 7;

More Info on Table Variables: http://odetocode.com/articles/365.aspx

If your system is Posix.2 compliant it should supply the printf utility:

$ printf "print 'zap'\nfor r in range(3): print 'rob'" | python
zap
rob
rob
rob

I think the reason that I have the same issue is a bug in the latest Docker for Mac beta, but buried in the comments there I was able to find a solution that worked for me & my team. We're using this for local development, where we need our containerized services to talk to a monolith as we work to replace it. This is probably not a production-viable solution.

On the host machine, alias a known available IP address to the loopback interface:

$ sudo ifconfig lo0 alias 10.200.10.1/24

Then add that IP with a hostname to your docker config. In my case, I'm using docker-compose, so I added this to my docker-compose.yml:

extra_hosts:
# configure your host to alias 10.200.10.1 to the loopback interface:
#       sudo ifconfig lo0 alias 10.200.10.1/24
- "relevant_hostname:10.200.10.1"

I then verified that the desired host service (a web server) was available from inside the container by attaching to a bash session, and using wget to request a page from the host's web server:

$ docker exec -it container_name /bin/bash
$ wget relevant_hostname/index.html
$ cat index.html

All you have to do is In your bLoanButton_Click , add a line to rebind the Grid to the SqlDataSource :

protected void bLoanButton_Click(object sender, EventArgs e)
{

//your same code
........

GridView1.DataBind();


}

regards

Android Studio keeps evolving so the responses above will eventually be no longer applicable. For the current version of Android Studio 1.2.1.1, there's a nice tutorial on testing at:

http://evgenii.com/blog/testing-activity-in-android-studio-tutorial-part-1/

If the issue is consistent and happened about 10-15 times in a row even after changing file permissions to 400 or 600, then it is most certainly something is wrong on the ec2 instance, so to make sure:

1. Check the logs when you try to ssh to the instance by adding -v at the end and see either it gives out anything specific.

2. Make sure you use the correct name for ssh, like Ubuntu. Perhaps that depends on Linux distribution and users you added and either you've given permission for "root user" ssh.

Then if nothing helps, follow the documentation here https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/TroubleshootingInstancesConnecting.html#TroubleshootingInstancesConnectingMindTerm to fix that. It helped in my case, and it happened because of messed up directories/files permissions.

This question has been answered sufficiently many times, but with C# 7.2 and the introduction of the Span type, there is a faster way to do this in unsafe code:

public static class StringSupport
{
    private static readonly int _charSize = sizeof(char);

    public static unsafe byte[] GetBytes(string str)
    {
        if (str == null) throw new ArgumentNullException(nameof(str));
        if (str.Length == 0) return new byte[0];

        fixed (char* p = str)
        {
            return new Span<byte>(p, str.Length * _charSize).ToArray();
        }
    }

    public static unsafe string GetString(byte[] bytes)
    {
        if (bytes == null) throw new ArgumentNullException(nameof(bytes));
        if (bytes.Length % _charSize != 0) throw new ArgumentException($"Invalid {nameof(bytes)} length");
        if (bytes.Length == 0) return string.Empty;

        fixed (byte* p = bytes)
        {
            return new string(new Span<char>(p, bytes.Length / _charSize));
        }
    }
}

Keep in mind that the bytes represent a UTF-16 encoded string (called "Unicode" in C# land).

Some quick benchmarking shows that the above methods are roughly 5x faster than their Encoding.Unicode.GetBytes(...)/GetString(...) implementations for medium sized strings (30-50 chars), and even faster for larger strings. These methods also seem to be faster than using pointers with Marshal.Copy(..) or Buffer.MemoryCopy(...).

In my case the error was appearing because I had uploaded the whole folder, containing the website files, into the container.

I solved it by moving all the files outside the folder, right into the container.

The fundamental issue with your code is that you mix two APIs. Unfortunately online resources are not great at pointing this out, but there are two semaphore APIs on UNIX-like systems:

• POSIX IPC API, which is a standard API
• System V API, which is coming from the old Unix world, but practically available almost all Unix systems

Looking at the code above you used semget() from the System V API and tried to post through sem_post() which comes from the POSIX API. It is not possible to mix them.

To decide which semaphore API you want you don't have so many great resources. The simple best is the "Unix Network Programming" by Stevens. The section that you probably interested in is in Vol #2.

These two APIs are surprisingly different. Both support the textbook style semaphores but there are a few good and bad points in the System V API worth mentioning:

• it builds on semaphore sets, so once you created an object with semget() that is a set of semaphores rather then a single one
• the System V API allows you to do atomic operations on these sets. so you can modify or wait for multiple semaphores in a set
• the SysV API allows you to wait for a semaphore to reach a threshold rather than only being non-zero. waiting for a non-zero threshold is also supported, but my previous sentence implies that
• the semaphore resources are pretty limited on every unixes. you can check these with the 'ipcs' command
• there is an undo feature of the System V semaphores, so you can make sure that abnormal program termination doesn't leave your semaphores in an undesired state

You can use str.zfill:

print(str(1).zfill(2))
print(str(10).zfill(2))
print(str(100).zfill(2))

prints:

01
10
100

You can set custom color using this-

check out this - click hear

XSSFWorkbook workbook = new XSSFWorkbook();

IndexedColorMap colorMap = workbook.getStylesSource().getIndexedColors();
Font tableHeadOneFontStyle = workbook.createFont();
        tableHeadOneFontStyle.setBold( true );
        tableHeadOneFontStyle.setColor( IndexedColors.BLACK.getIndex() );

XSSFCellStyle tableHeaderOneColOneStyle = workbook.createCellStyle();
        tableHeaderOneColOneStyle.setFont( tableHeadOneFontStyle );
        tableHeaderOneColOneStyle
                .setFillForegroundColor( new XSSFColor( new java.awt.Color( 255, 231, 153 ), colorMap ) );
        tableHeaderOneColOneStyle.setFillPattern( FillPatternType.SOLID_FOREGROUND );
        tableHeaderOneColOneStyle = setLeftRightBorderColor( tableHeaderOneColOneStyle );
        tableHeaderOneColOneStyle = alignCenter( tableHeaderOneColOneStyle );

You can't use {{}} when using angular directives for binding with ng-model but for binding non-angular attributes you would have to use {{}}..

Eg:

ng-show="my-model"
title = "{{my-model}}"

Try this: parseInt(jQuery.offset().top, 10)

Run this:

Rails.application.eager_load! 

Then

ActiveRecord::Base.descendants

To return a list of models/tables

Using AddDays(-1) worked for me until I tried to cross months. When I tried to subtract 2 days from 2017-01-01 the result was 2016-00-30. It could not handle the month change correctly (though the year seemed to be fine).

I used date = Convert.ToDateTime(date).Subtract(TimeSpan.FromDays(2)).ToString("yyyy-mm-dd"); and have no issues.

I don't recommend doing DOM manipulations inside a loop -- that can get expensive in large datasets. Instead, I would do something like this:

var elMainSelect = document.getElementById('mainSelect');

function selectOptionsCreate() {
  var frag = document.createDocumentFragment(),
    elOption;
  for (var i=12; i<101; ++i) {
    elOption = frag.appendChild(document.createElement('option'));
    elOption.text = i;
  }
  elMainSelect.appendChild(frag);
}

You can read more about DocumentFragment on MDN, but here's the gist of it:

It is used as a light-weight version of Document to store a segment of a document structure comprised of nodes just like a standard document. The key difference is that because the document fragment isn't part of the actual DOM's structure, changes made to the fragment don't affect the document, cause reflow, or incur any performance impact that can occur when changes are made.

Assuming that you made the necessary changes in your php.ini files:

You can resolve the issue by adding the following line in your nginx.conf file found in the following path:

/etc/nginx/nginx.conf

then edit the file using vim text editor as follows:

vi /etc/nginx/nginx.conf

and add client_max_body_size with a large enough value, for example:

client_max_body_size 20MB;

After that make sure you save using :xi or :wq

And then restart your nginx.

That's it.

Worked for me, hope this helps.

List<T>.Add adds a single element. Instead, use List<T>.AddRange to add multiple values.

Additionally, List<T>.AddRange takes an IEnumerable<T>, so you don't need to convert tripDetails into a List<TripDetails>, you can pass it directly, e.g.:

tripDetailsCollection.AddRange(tripDetails);

You need to construct it using req.headers.host + req.url. Of course if you are hosting in a different port and such you get the idea ;-)

Turns out that I just have to convert @column name testName to all small letters, since it was initially in camel case.

Although I was not able to use the official answer, the question was able to help me solve my problem by letting me know what to investigate.

Change:

@Column(name="testName")
private String testName;

To:

@Column(name="testname")
private String testName;

I found that Glassfish by default is looking at [Glassfish install location]\glassfish\domains[your domain]\ as the default working directory... you can drop the log4j.properties file in this location and initialize it in your code using PropertyConfigurator as previously mentioned...

Properties props = System.getProperties();
System.out.println("Current working directory is " + props.getProperty("user.dir"));
PropertyConfigurator.configure("log4j.properties");

There are a couple of ways to solve this. The least hackiest and almost what you want:

$client = new SoapClient(
    null,
    array(
        'location' => 'https://example.com/ExampleWebServiceDL/services/ExampleHandler',
        'uri' => 'http://example.com/wsdl',
        'trace' => 1,
        'use' => SOAP_LITERAL,
    )
);
$params = new \SoapVar("<Acquirer><Id>MyId</Id><UserId>MyUserId</UserId><Password>MyPassword</Password></Acquirer>", XSD_ANYXML);
$result = $client->Echo($params);

This gets you the following XML:

<?xml version="1.0" encoding="UTF-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="http://example.com/wsdl">
    <SOAP-ENV:Body>
        <ns1:Echo>
            <Acquirer>
                <Id>MyId</Id>
                <UserId>MyUserId</UserId>
                <Password>MyPassword</Password>
            </Acquirer>
        </ns1:Echo>
    </SOAP-ENV:Body>
</SOAP-ENV:Envelope>

That is almost exactly what you want, except for the namespace on the method name. I don't know if this is a problem. If so, you can hack it even further. You could put the <Echo> tag in the XML string by hand and have the SoapClient not set the method by adding 'style' => SOAP_DOCUMENT, to the options array like this:

$client = new SoapClient(
    null,
    array(
        'location' => 'https://example.com/ExampleWebServiceDL/services/ExampleHandler',
        'uri' => 'http://example.com/wsdl',
        'trace' => 1,
        'use' => SOAP_LITERAL,
        'style' => SOAP_DOCUMENT,
    )
);
$params = new \SoapVar("<Echo><Acquirer><Id>MyId</Id><UserId>MyUserId</UserId><Password>MyPassword</Password></Acquirer></Echo>", XSD_ANYXML);
$result = $client->MethodNameIsIgnored($params);

This results in the following request XML:

<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
    <SOAP-ENV:Body>
        <Echo>
            <Acquirer>
                <Id>MyId</Id>
                <UserId>MyUserId</UserId>
                <Password>MyPassword</Password>
            </Acquirer>
        </Echo>
    </SOAP-ENV:Body>
</SOAP-ENV:Envelope>

Finally, if you want to play around with SoapVar and SoapParam objects, you can find a good reference in this comment in the PHP manual: http://www.php.net/manual/en/soapvar.soapvar.php#104065. If you get that to work, please let me know, I failed miserably.

Yes, you either need to do this onload or in a <script> tag after the closing </body> tag, when the lc element is already found in the document's DOM tree.

IaaS, PaaS and SaaS are cloud computing service models.

• IaaS (Infrastructure as a Service), as the name suggests, provides you the computing infrastructure, physical or (quite often) virtual machines and other resources like virtual-machine disk image library, block and file-based storage, firewalls, load balancers, IP addresses, virtual local area networks etc.

  Examples: Amazon EC2, Windows Azure, Rackspace, Google Compute Engine.

• PaaS (Platform as a Service), as the name suggests, provides you computing platforms which typically includes operating system, programming language execution environment, database, web server etc.

  Examples: AWS Elastic Beanstalk, Windows Azure, Heroku, Force.com, Google App Engine, Apache Stratos.

• While in SaaS (Software as a Service) model you are provided with access to application software often referred to as "on-demand software". You don't have to worry about the installation, setup and running of the application. Service provider will do that for you. You just have to pay and use it through some client.

  Examples: Google Apps, Microsoft Office 365.

Few additional points regarding your question:

1. AWS (Amazon web services) is a complete suite which involves a whole bunch of useful web services. Most popular are EC2 and S3 and they belong to IaaS service model.

2. Although Hadoop is based on previous works by Google(GFS and MapReduce), it is not from Google. It is an Apache project. You can find more here. It is just a distributed computing platform and does not fall into any of these service models, IMHO.

3. Microsoft's Windows Azure is again an example of IaaS.

As far as popularity of these services is concerned, they all are popular. It's just that which one fits into your requirements better. For example, if you want to have a Hadoop cluster on which you would run MapReduce jobs, you will find EC2 a perfect fit, which is IaaS. On the other hand if you have some application, written in some language, and you want to deploy it over the cloud, you would choose something like Heroku, which is an example of PaaS.

in my opinion strstr() is better than strpos(). because strstr() is compatible with both PHP 4 AND PHP 5. but strpos() is only compatible with PHP 5. please note that part of servers have no PHP 5

You can also use "shouldReceiveTouch" method of UIGestureRecognizer

- (BOOL)gestureRecognizer:(UIGestureRecognizer *)gestureRecognizer shouldReceiveTouch:     (UITouch *)touch {
     UIView *view = touch.view; 
     NSLog(@"%d", view.tag); 
}    

Dont forget to set delegate of your gesture recognizer.