With some help from another person, we figured out it was an issue of ordering the source files within the HTML file. I learned that browsers accept the first usable format, and their seems to be an issue with the .m4v file, so I started with the .mp4, then .webm. Here's the order that works in Safari (even on my iPhone 5), Firefox, and Chrome:

<video width="100%" height="400" poster="assets/img/myVideo.jpg" controls="controls" preload="none">
      <!-- MP4 for Safari, IE9, iPhone, iPad, Android, and Windows Phone 7 -->
      <source type="video/mp4" src="assets/vid/PhysicsEtoys.mp4" />
      <!-- WebM/VP8 for Firefox4, Opera, and Chrome -->
      <source type="video/webm" src="assets/vid/PhysicsEtoys.webm" />
       <!-- M4V for Apple -->
      <source type="video/mp4" src="assets/vid/PhysicsEtoys.m4v" />
      <!-- Ogg/Vorbis for older Firefox and Opera versions -->
      <source type="video/ogg" src="assets/vid/PhysicsEtoys.ogv" />
      <!-- Subtitles -->
      <track kind="subtitles" src="assets/vid/subtitles.srt" srclang="en" />
      <track kind="subtitles" src="assets/vid/subtitles.vtt" srclang="en" />
      <!-- Flash fallback for non-HTML5 browsers without JavaScript -->
      <object width="100%" height="400" type="application/x-shockwave-flash" data="flashmediaelement.swf">
          <param name="movie" value="flashmediaelement.swf" />
          <param name="flashvars" value="controls=true&file=assets/vid/PhysicsEtoys.mp4" />
          <!-- Image as a last resort -->
          <img src="assets/img/myVideo.jpg" width="320" height="240" title="No video playback capabilities" />
      </object>
  </video>

Now, I'll have to re-check the encoding on the m4v file (perhaps an issue of Baseline vs Main, High, etc.).

Try checking the References section, and see if there is a warning icon over the library reference you included:

If you see it then go to the Project -> Properties -> Application and make sure that both libraries are targeting the same version of the .NET framework.

P.S. When this issue happens it can also be noticed from the Warnings section:

I have try all the way above, but each one has their shortness, and thanks to all you, I work out my own GifImage:

    using System;
    using System.Collections.Generic;
    using System.Linq;
    using System.Text;
    using System.Windows.Controls;
    using System.Windows;
    using System.Windows.Media.Imaging;
    using System.IO;
    using System.Windows.Threading;

    namespace IEXM.Components
    {
    public class GifImage : Image
    {
            #region gif Source, such as "/IEXM;component/Images/Expression/f020.gif"
            public string GifSource
            {
                    get { return (string)GetValue(GifSourceProperty); }
                    set { SetValue(GifSourceProperty, value); }
            }

            public static readonly DependencyProperty GifSourceProperty =
                    DependencyProperty.Register("GifSource", typeof(string),
                    typeof(GifImage), new UIPropertyMetadata(null, GifSourcePropertyChanged));

            private static void GifSourcePropertyChanged(DependencyObject sender,
                    DependencyPropertyChangedEventArgs e)
            {
                    (sender as GifImage).Initialize();
            }
            #endregion

            #region control the animate
            /// <summary>
            /// Defines whether the animation starts on it's own
            /// </summary>
            public bool IsAutoStart
            {
                    get { return (bool)GetValue(AutoStartProperty); }
                    set { SetValue(AutoStartProperty, value); }
            }

            public static readonly DependencyProperty AutoStartProperty =
                    DependencyProperty.Register("IsAutoStart", typeof(bool),
                    typeof(GifImage), new UIPropertyMetadata(false, AutoStartPropertyChanged));

            private static void AutoStartPropertyChanged(DependencyObject sender,
                    DependencyPropertyChangedEventArgs e)
            {
                    if ((bool)e.NewValue)
                            (sender as GifImage).StartAnimation();
                    else
                            (sender as GifImage).StopAnimation();
            }
            #endregion

            private bool _isInitialized = false;
            private System.Drawing.Bitmap _bitmap;
            private BitmapSource _source;

            [System.Runtime.InteropServices.DllImport("gdi32.dll")]
            public static extern bool DeleteObject(IntPtr hObject);

            private BitmapSource GetSource()
            {
                    if (_bitmap == null)
                    {
                            _bitmap = new System.Drawing.Bitmap(Application.GetResourceStream(
                                     new Uri(GifSource, UriKind.RelativeOrAbsolute)).Stream);
                    }

                    IntPtr handle = IntPtr.Zero;
                    handle = _bitmap.GetHbitmap();

                    BitmapSource bs = System.Windows.Interop.Imaging.CreateBitmapSourceFromHBitmap(
                            handle, IntPtr.Zero, Int32Rect.Empty, BitmapSizeOptions.FromEmptyOptions());
                    DeleteObject(handle);
                    return bs;
            }

            private void Initialize()
            {
            //        Console.WriteLine("Init: " + GifSource);
                    if (GifSource != null)
                            Source = GetSource();
                    _isInitialized = true;
            }

            private void FrameUpdatedCallback()
            {
                    System.Drawing.ImageAnimator.UpdateFrames();

                    if (_source != null)
                    {
                            _source.Freeze();
                    }

               _source = GetSource();

              //  Console.WriteLine("Working: " + GifSource);

                    Source = _source;
                    InvalidateVisual();
            }

            private void OnFrameChanged(object sender, EventArgs e)
            {
                    Dispatcher.BeginInvoke(DispatcherPriority.Normal, new Action(FrameUpdatedCallback));
            }

            /// <summary>
            /// Starts the animation
            /// </summary>
            public void StartAnimation()
            {
                    if (!_isInitialized)
                            this.Initialize();


             //   Console.WriteLine("Start: " + GifSource);

                    System.Drawing.ImageAnimator.Animate(_bitmap, OnFrameChanged);
            }

            /// <summary>
            /// Stops the animation
            /// </summary>
            public void StopAnimation()
            {
                    _isInitialized = false;
                    if (_bitmap != null)
                    {
                            System.Drawing.ImageAnimator.StopAnimate(_bitmap, OnFrameChanged);
                            _bitmap.Dispose();
                            _bitmap = null;
                    }
                    _source = null;
                    Initialize();
                    GC.Collect();
                    GC.WaitForFullGCComplete();

             //   Console.WriteLine("Stop: " + GifSource);
            }

            public void Dispose()
            {
                    _isInitialized = false;
                    if (_bitmap != null)
                    {
                            System.Drawing.ImageAnimator.StopAnimate(_bitmap, OnFrameChanged);
                            _bitmap.Dispose();
                            _bitmap = null;
                    }
                    _source = null;
                    GC.Collect();
                    GC.WaitForFullGCComplete();
               // Console.WriteLine("Dispose: " + GifSource);
            }
    }
}

Usage:

<localComponents:GifImage x:Name="gifImage" IsAutoStart="True" GifSource="{Binding Path=value}" />

As it would not cause memory leak and it animated the gif image own time line, you can try it.

You could directly inject the values into JavaScript:

//View.cshtml
<script type="text/javascript">
    var arrayOfArrays = JSON.parse('@Html.Raw(Model.Addresses)');
</script>

See JSON.parse, Html.Raw

Alternatively you can get the values via Ajax:

public ActionResult GetValues()
{
    // logic
    // Edit you don't need to serialize it just return the object

    return Json(new { Addresses: lAddressGeocodeModel });
}

<script type="text/javascript">
$(function() {
    $.ajax({
        type: 'POST',
        url: '@Url.Action("GetValues")',
        success: function(result) {
            // do something with result
        }
    });
});
</script>

See jQuery.ajax

You don't need to convert it at all:

% perl -e 'print "5.45" + 0.1;'
5.55

First, we must make a distinction between layers and tiers. Layers are the way to logically break code into components and tiers are the physical nodes to place the components on. This question explains it better: What's the difference between "Layers" and "Tiers"?

A two layer architecture is usually just a presentation layer and data store layer. These can be on 1 tier (1 machine) or 2 tiers (2 machines) to achieve better performance by distributing the work load.

A three layer architecture usually puts something between the presentation and data store layers such as a business logic layer or service layer. Again, you can put this into 1,2, or 3 tiers depending on how much money you have for hardware and how much load you expect.

Putting multiple machines in a tier will help with the robustness of the system by providing redundancy.

Below is a good example of a layered architecture:

_{(source: microsoft.com)}

A good reference for all of this can be found here on MSDN: http://msdn.microsoft.com/en-us/library/ms978678.aspx

I customized Tomcat DataSource in Spring-Boot 2.

Dependency versions:

• spring-boot: 2.1.9.RELEASE
• tomcat-jdbc: 9.0.20

May be it will be useful for somebody.

application.yml

spring:
    datasource:
        driver-class-name: org.postgresql.Driver
        type: org.apache.tomcat.jdbc.pool.DataSource
        url: jdbc:postgresql://${spring.datasource.database.host}:${spring.datasource.database.port}/${spring.datasource.database.name}
        database:
            host: localhost
            port: 5432
            name: rostelecom
        username: postgres
        password: postgres
        tomcat:
            validation-query: SELECT 1
            validation-interval: 30000           
            test-on-borrow: true
            remove-abandoned: true
            remove-abandoned-timeout: 480
            test-while-idle: true
            time-between-eviction-runs-millis: 60000
            log-validation-errors: true
            log-abandoned: true

Java

@Bean
@Primary
@ConfigurationProperties("spring.datasource.tomcat")
public PoolConfiguration postgresDataSourceProperties() {
    return new PoolProperties();
}

@Bean(name = "primaryDataSource")
@Primary
@Qualifier("primaryDataSource")
@ConfigurationProperties(prefix = "spring.datasource")
public DataSource primaryDataSource() {
    PoolConfiguration properties = postgresDataSourceProperties();
    return new DataSource(properties);
}

The main reason why it had been done is several DataSources in application and one of them it is necessary to mark as a @Primary.

CGSize maxSize = CGSizeMake(lbl.frame.size.width, CGFLOAT_MAX);
CGSize requiredSize = [lbl sizeThatFits:maxSize];
CGFloat height=requiredSize.height

Give A Try Like this

    result = spark.createDataFrame([('SpeciesId','int'), ('SpeciesName','string')],["col_name", "data_type"]); 
    for f in result.collect(): 
        print (f.col_name)

Doctrine now has Criteria which offers a single API for filtering collections with SQL and in PHP, depending on the context.

https://www.doctrine-project.org/projects/doctrine-orm/en/latest/reference/working-with-associations.html#filtering-collections

Update

This will achieve the result in the accepted answer, without getting everything from the database.

use Doctrine\Common\Collections\Criteria;

/**
 * @ORM\Entity
 */
class Member {
  // ...
  public function getCommentsFiltered($ids) {
    $criteria = Criteria::create()->where(Criteria::expr()->in("id", $ids));

    return $this->getComments()->matching($criteria); 
  }
}

1. Navigate to C:\Users\username\Documents\IISExpress\config
2. Open applicationhost.config with Visual Studio or your favorite text-editor.
3. Search for the word mimeMap, you should find lots of 'em.
4. Add the following line to the top of the list: .

Assuming that your table name is city and your existing Primary Key is pk_city, you should be able to do the following:

ALTER TABLE city
DROP CONSTRAINT pk_city;

ALTER TABLE city
ADD CONSTRAINT pk_city PRIMARY KEY (city_id, buildtime, time);

Make sure that there are no records where time is NULL, otherwise you won't be able to re-create the constraint.

I solve it by close safari inspector. Refer to my post. I also found sound sometimes when I run my app for testing, then I open safari with auto inspector on, after this, I do some action in my app then this issue triggered.

If you are inheriting UITableViewController, you can just init tableView again.

Objective C:

self.tableView = [[UITableView alloc] initWithFrame:CGRectZero style:UITableViewStyleGrouped];

Swift:

self.tableView = UITableView(frame: CGRect.zero, style: .grouped)

I know it’s totally stupid and you normally really shouldn’t use tables when not creating tables, but:

Table cells can align multiple lines of text vertically centered and even do this by default. So a solution which works quite fine could be something like this:

HTML:

<div class="box">
  <table class="textalignmiddle">
    <tr>
      <td>lorem ipsum ...</td>
    </tr>
  </table>
</div>

CSS (make the table item always fit to the box div):

.box {
  /* For example */
  height: 300px;
}

.textalignmiddle {
  width: 100%;
  height: 100%;
}

See here: http://www.cssdesk.com/LzpeV

I know it's been a while this has been posted, but with iOS 7.1, a few things have changed.

So far, if you are developing an App, you MUST have a valid SSL certificate recognized by Apple, otherwise you will get an error message on you iDevice. No more self-signed certificates. See here a list:

http://support.apple.com/kb/ht5012

Additionally, if you are here, it means that you are trying to make you iDevice resolve a name (to your https server), on a test or development environment.

Instead of using squid, which is a great application, you could simply run a very basic DNS server like dnsmasq. It will use your hosts file as a first line of name resolution, so, you can basically fool your iDevice there, saying that www.blah.com is 192.168.10.10.

The configuration file is as simple as 3 to 4 lines, and you can even configure its internal DHCP server if you want.

Here is mine:

listen-address=192.168.10.35

domain-needed

bogus-priv

no-dhcp-interface=eth0

local=/localnet/

Of course you have to configure networking on your iDevice to use that DNS (192.168.10.35 in my case), or just start using DHCP from that server anyway, after properly configured.

Additionally, if dnsmasq cannot resolve the name internally, it uses your regular DNS server (like 8.8.8.8) to resolve it for you. VERY simple, elegant, and solved my problems with iDevice App installation in-house.

By the way, solves many name resolution problems with regular macs (OS X) as well.

Now, my rant: bloody Apple. Making a device safe should not include castrating the operating system or the developers.

Easy and best solution is the following.
index.html

<form action="submit.php" method="POST">
   <input type="text" name="name" value="" />
   <input type="text" name="email" value="" />
   <textarea type="text" name="message"></textarea>
   <div class="g-recaptcha" data-sitekey="Insert Your Site Key"></div>
   <input type="submit" name="submit" value="SUBMIT">
</form>

submit.php

<?php
if(isset($_POST['submit']) && !empty($_POST['submit'])){
  if(isset($_POST['g-recaptcha-response']) && !empty($_POST['g-recaptcha-response'])){
    //your site secret key
    $secret = 'InsertSiteSecretKey';
    //get verify response data
    $verifyResponse = file_get_contents('https://www.google.com/recaptcha/api/siteverify?secret='.$secret.'&response='.$_POST['g-recaptcha-response']);
    $responseData = json_decode($verifyResponse);
    if($responseData->success){
        //contact form submission code goes here

        $succMsg = 'Your contact request have submitted successfully.';
    }else{
        $errMsg = 'Robot verification failed, please try again.';
    }
  }else{
    $errMsg = 'Please click on the reCAPTCHA box.';
  }
}
?>

I have found this reference and full tutorial from here - Using new Google reCAPTCHA with PHP

why dont you add a "source" column to each of the queries with a static value like

select 'source 1' as Source, column1, column2...
from table1

UNION ALL

select 'source 2' as Source, column1, column2...
from table2

In case of Java 8 we can also use IntStream to reverse the array of integers as:

int[] sample = new int[]{1,2,3,4,5};
int size = sample.length;
int[] reverseSample = IntStream.range(0,size).map(i -> sample[size-i-1])
                      .toArray(); //Output: [5, 4, 3, 2, 1]

This worked perfectly for me : sValue = sValue.trim().replaceAll("\\s+", " ");

If you do not have access to the TestRunner type information in the calling assembly (it sounds like you may not), you can call the method like this:

Assembly assembly = Assembly.LoadFile(@"C:\dyn.dll");
Type     type     = assembly.GetType("TestRunner");
var      obj      = Activator.CreateInstance(type);

// Alternately you could get the MethodInfo for the TestRunner.Run method
type.InvokeMember("Run", 
                  BindingFlags.Default | BindingFlags.InvokeMethod, 
                  null,
                  obj,
                  null);

If you have access to the IRunnable interface type, you can cast your instance to that (rather than the TestRunner type, which is implemented in the dynamically created or loaded assembly, right?):

  Assembly assembly  = Assembly.LoadFile(@"C:\dyn.dll");
  Type     type      = assembly.GetType("TestRunner");
  IRunnable runnable = Activator.CreateInstance(type) as IRunnable;
  if (runnable == null) throw new Exception("broke");
  runnable.Run();

Keep in mind that SQL strings can not be larger than 4000 bytes, while Pl/SQL can have strings as large as 32767 bytes. see below for an example of inserting a large string via an anonymous block which I believe will do everything you need it to do.

note I changed the varchar2(32000) to CLOB

set serveroutput ON 
CREATE TABLE testclob 
  ( 
     id NUMBER, 
     c  CLOB, 
     d  VARCHAR2(4000) 
  ); 

DECLARE 
    reallybigtextstring CLOB := '123'; 
    i                   INT; 
BEGIN 
    WHILE Length(reallybigtextstring) <= 60000 LOOP 
        reallybigtextstring := reallybigtextstring 
                               || '000000000000000000000000000000000'; 
    END LOOP; 

    INSERT INTO testclob 
                (id, 
                 c, 
                 d) 
    VALUES     (0, 
                reallybigtextstring, 
                'done'); 

    dbms_output.Put_line('I have finished inputting your clob: ' 
                         || Length(reallybigtextstring)); 
END; 

/ 
SELECT * 
FROM   testclob; 


 "I have finished inputting your clob: 60030"

As per source code

function ReactComponent(props, context) {
  this.props = props;
  this.context = context;
}

you must pass props every time you have props and you don't put them into this.props manually.

Why is 21 the default port for FTP? Or 80 the default for HTTP? It is a convention.

SHA1 and a salt should suffice (depending, naturally, on whether you are coding something for Fort Knox or a login system for your shopping list) for the foreseeable future. If SHA1 isn't good enough for you, use SHA256.

The idea of a salt is to throw the hashing results off balance, so to say. It is known, for example, that the MD5-hash of an empty string is d41d8cd98f00b204e9800998ecf8427e. So, if someone with good enough a memory would see that hash and know that it's the hash of an empty string. But if the string is salted (say, with the string "MY_PERSONAL_SALT"), the hash for the 'empty string' (i.e. "MY_PERSONAL_SALT") becomes aeac2612626724592271634fb14d3ea6, hence non-obvious to backtrace. What I'm trying to say, that it's better to use any salt, than not to. Therefore, it's not too much of an importance to know which salt to use.

There are actually websites that do just this - you can feed it a (md5) hash, and it spits out a known plaintext that generates that particular hash. If you would get access to a database that stores plain md5-hashes, it would be trivial for you to enter the hash for the admin to such a service, and log in. But, if the passwords were salted, such a service would become ineffective.

Also, double-hashing is generally regarded as bad method, because it diminishes the result space. All popular hashes are fixed-length. Thus, you can have only a finite values of this fixed length, and the results become less varied. This could be regarded as another form of salting, but I wouldn't recommend it.

In my opinion you should not load and use plugins you don't have to. This particular jQuery plugin doesn't give you anything since directly using the JavaScript sessionStorage object is exactly the same level of complexity. Nor, does the plugin provide some easier way to interact with other jQuery functionality. In addition the practice of using a plugin discourages a deep understanding of how something works. sessionStorage should be used only if its understood. If its understood, then using the jQuery plugin is actually MORE effort.

Consider using sessionStorage directly: https://developer.mozilla.org/en-US/docs/Web/Guide/API/DOM/Storage#sessionStorage

The npm module anyid provides flexible API to generate various kinds of string ID / code.

To generate random string in A-Za-z0-9 using 48 random bytes:

const id = anyid().encode('Aa0').bits(48 * 8).random().id();
// G4NtiI9OYbSgVl3EAkkoxHKyxBAWzcTI7aH13yIUNggIaNqPQoSS7SpcalIqX0qGZ

To generate fixed length alphabet only string filled by random bytes:

const id = anyid().encode('Aa').length(20).random().id();
// qgQBBtDwGMuFHXeoVLpt

Internally it uses crypto.randomBytes() to generate random.

PHPMailerAutoload needs to be in the same folder as class.phpmailer.php

This is the PHPMailerAutoload code that I assume this:

 $filename = dirname(__FILE__).DIRECTORY_SEPARATOR.'class.'.strtolower($classname).'.php';

Above (Pre-SQL12) we see examples like this:-

SELECT
    T1.id, SUM(T2.id) AS CumSum
FROM 
    #TMP T1
    JOIN #TMP T2 ON T2.id < = T1.id
GROUP BY
    T1.id

More efficient...

SELECT
    T1.id, SUM(T2.id) + T1.id AS CumSum
FROM 
    #TMP T1
    JOIN #TMP T2 ON T2.id < T1.id
GROUP BY
    T1.id

Please try this. Maybe this could help you. It works for me.

string sValue = (range.Cells[_row, _column] as Microsoft.Office.Interop.Excel.Range).Value2.ToString();
//_row,_column your column & row number 
//eg: string sValue = (sheet.Cells[i + 9, 12] as Microsoft.Office.Interop.Excel.Range).Value2.ToString();
//sValue has your value

Calling conventions defines how parameters are passed in the registers when calling or being called by other program. And the best source of these convention is in the form of ABI standards defined for each these hardware. For ease of compilation, the same ABI is also used by userspace and kernel program. Linux/Freebsd follow the same ABI for x86-64 and another set for 32-bit. But x86-64 ABI for Windows is different from Linux/FreeBSD. And generally ABI does not differentiate system call vs normal "functions calls". Ie, here is a particular example of x86_64 calling conventions and it is the same for both Linux userspace and kernel: http://eli.thegreenplace.net/2011/09/06/stack-frame-layout-on-x86-64/ (note the sequence a,b,c,d,e,f of parameters):

Performance is one of the reasons for these ABI (eg, passing parameters via registers instead of saving into memory stacks)

For ARM there is various ABI:

http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.subset.swdev.abi/index.html

https://developer.apple.com/library/ios/documentation/Xcode/Conceptual/iPhoneOSABIReference/iPhoneOSABIReference.pdf

ARM64 convention:

http://infocenter.arm.com/help/topic/com.arm.doc.ihi0055b/IHI0055B_aapcs64.pdf

For Linux on PowerPC:

http://refspecs.freestandards.org/elf/elfspec_ppc.pdf

http://www.0x04.net/doc/elf/psABI-ppc64.pdf

And for embedded there is the PPC EABI:

http://www.freescale.com/files/32bit/doc/app_note/PPCEABI.pdf

This document is good overview of all the different conventions:

http://www.agner.org/optimize/calling_conventions.pdf

php artisan help migrate

You will see the option:

--path[=PATH] The path to the migrations files to be executed

By the way, you can probably indicate the root folder of the file that you want to migrate:

php artisan migrate --path=/database/migrations/sample.php

Or, You can create a new folder in migrations, then migrate all the migration files you want inside it:

php artisan migrate --path=/database/migrations/new_folder

Most compilers I've used will at least warn on the if assignment without further syntax sugar, so I don't buy that argument. That said, I've used both professionally and have no preference for either. The == NULL is definitely clearer though in my opinion.

You will need to use semicolon as delimiter while specifying the jar and class file path in windows. This solved the issue.
Assuming the class file is under C:.

java -cp ".;C:\testng.jar" org.testng.TestNG testing.xml

You can create your view directly from the Layout Inflater, you only need to use the name of your layout XML file and the ID of the layout in file.

Your XML file should have an ID like this:

<?xml version="1.0" encoding="utf-8"?>
<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
              android:id="@+id/dialog_layout_root"
              android:orientation="vertical"
              android:layout_width="fill_parent"
              android:layout_height="wrap_content"
              android:padding="10dp"
              />

And then you can set your layout on the builder with the following code:

LayoutInflater inflater = getLayoutInflater();
View dialoglayout = inflater.inflate(R.layout.dialog_layout, null);
AlertDialog.Builder builder = new AlertDialog.Builder(this);
builder.setView(dialoglayout);
builder.show();

If you are using RxJS 6.0.0:

import { from } from 'rxjs';
const observable = from(promise);

Depending on your needs, like if you want to allow the data to eventually expire or set limitations on how many records to store, you could also look at https://github.com/jmdobry/angular-cache which allows you to define if the cache sits in memory, localStorage, or sessionStorage.

$(window).scroll( function() { 
 var scrolled_val = $(document).scrollTop().valueOf();
 alert(scrolled_val+ ' = scroll value');
});

This is another way of getting the value of scroll.

This happened to me when I tried to use my older code in new android with androidx implementations. change your XML definition to;

<androidx.appcompat.widget.Toolbar
            android:id="@+id/toolbar"
            android:layout_width="match_parent"
            android:layout_height="?attr/actionBarSize"
            android:background="@color/colorPrimary"
            android:theme="@style/ThemeOverlay.AppCompat.ActionBar"
            app:titleTextColor="@android:color/white" />

then in your java code;

import androidx.appcompat.widget.Toolbar;

For a dynamic approach, if your labels are always in front of your text areas:

$(object).prev("label").text(charsleft);

put it in double quotes

echo "\t";

See: http://php.net/language.types.string#language.types.string.syntax.double

This answer should work for Windows users that have had trouble getting this working with Visual Studio with any of the other answers.

1. Download the dirent.h file from the github page. But is better to just use the Raw dirent.h file and follow my steps below (it is how I got it to work).

   Github page for dirent.h for Windows: Github page for dirent.h

   Raw Dirent File: Raw dirent.h File

2. Go to your project and Add a new Item (Ctrl+Shift+A). Add a header file (.h) and name it dirent.h.

3. Paste the Raw dirent.h File code into your header.

4. Include "dirent.h" in your code.

5. Put the below void filefinder() method in your code and call it from your main function or edit the function how you want to use it.

   #include <stdio.h>
   #include <string.h>
   #include "dirent.h"
   
   string path = "C:/folder"; //Put a valid path here for folder
   
   void filefinder()
   {
       DIR *directory = opendir(path.c_str());
       struct dirent *direntStruct;
   
       if (directory != NULL) {
           while (direntStruct = readdir(directory)) {
               printf("File Name: %s\n", direntStruct->d_name); //If you are using <stdio.h>
               //std::cout << direntStruct->d_name << std::endl; //If you are using <iostream>
           }
       }
       closedir(directory);
   }
   

Navigate to your play page:

https://play.google.com/store/apps/details?id=com.yourpackage

Using a standard HTTP GET. Now the following jQuery finds important info for you:

Current Version

$("[itemprop='softwareVersion']").text()

What's new

$(".recent-change").each(function() { all += $(this).text() + "\n"; })

Now that you can extract these information manually, simply make a method in your app that executes this for you.

public static String[] getAppVersionInfo(String playUrl) {
    HtmlCleaner cleaner = new HtmlCleaner();
    CleanerProperties props = cleaner.getProperties();
    props.setAllowHtmlInsideAttributes(true);
    props.setAllowMultiWordAttributes(true);
    props.setRecognizeUnicodeChars(true);
    props.setOmitComments(true);
    try {
        URL url = new URL(playUrl);
        URLConnection conn = url.openConnection();
        TagNode node = cleaner.clean(new InputStreamReader(conn.getInputStream()));
        Object[] new_nodes = node.evaluateXPath("//*[@class='recent-change']");
        Object[] version_nodes = node.evaluateXPath("//*[@itemprop='softwareVersion']");

        String version = "", whatsNew = "";
        for (Object new_node : new_nodes) {
            TagNode info_node = (TagNode) new_node;
            whatsNew += info_node.getAllChildren().get(0).toString().trim()
                    + "\n";
        }
        if (version_nodes.length > 0) {
            TagNode ver = (TagNode) version_nodes[0];
            version = ver.getAllChildren().get(0).toString().trim();
        }
        return new String[]{version, whatsNew};
    } catch (IOException | XPatherException e) {
        e.printStackTrace();
        return null;
    }
}

Uses HtmlCleaner

the best way I can think of is using processing there are a few introductions on the net like displaying serial data, arduino graph and arduino radar
Since Arduino is based on processing its not that hard to learn

I had the same issue and the following fixed my issue:

1. Set the registry: npm config set registry "http://registry.npmjs.org/"
2. Removed the entry in hosts file (using Windows 7) => C:\Windows\System32\drivers\etc\hosts

You should not need to add this back in. This was removed purposefully. The documentation has changed somewhat and the CSS class that is necessary ("nav-stacked") is only mentioned under the pills component, but should work for tabs as well.

This tutorial shows how to use the Bootstrap 3 setup properly to do vertical tabs:
tutsme-webdesign.info/bootstrap-3-toggable-tabs-and-pills

[Updated to adapt to modern pandas, which has isnull as a method of DataFrames..]

You can use isnull and any to build a boolean Series and use that to index into your frame:

>>> df = pd.DataFrame([range(3), [0, np.NaN, 0], [0, 0, np.NaN], range(3), range(3)])
>>> df.isnull()
       0      1      2
0  False  False  False
1  False   True  False
2  False  False   True
3  False  False  False
4  False  False  False
>>> df.isnull().any(axis=1)
0    False
1     True
2     True
3    False
4    False
dtype: bool
>>> df[df.isnull().any(axis=1)]
   0   1   2
1  0 NaN   0
2  0   0 NaN

[For older pandas:]

You could use the function isnull instead of the method:

In [56]: df = pd.DataFrame([range(3), [0, np.NaN, 0], [0, 0, np.NaN], range(3), range(3)])

In [57]: df
Out[57]: 
   0   1   2
0  0   1   2
1  0 NaN   0
2  0   0 NaN
3  0   1   2
4  0   1   2

In [58]: pd.isnull(df)
Out[58]: 
       0      1      2
0  False  False  False
1  False   True  False
2  False  False   True
3  False  False  False
4  False  False  False

In [59]: pd.isnull(df).any(axis=1)
Out[59]: 
0    False
1     True
2     True
3    False
4    False

leading to the rather compact:

In [60]: df[pd.isnull(df).any(axis=1)]
Out[60]: 
   0   1   2
1  0 NaN   0
2  0   0 NaN

I ran in the same situation and the script was correctly loading in safe mode. However, disabling all the Add-ons and other Firefox security features didn't help. One thing I tried, and this was the solution in my case, was to temporary disable the cache from the developer window for this particular request. After I saw this was the cause, I wiped out the cache for that site and everything started word normally.

Arslan, why do you want to force orientation pro grammatically, though there's already a way in manifest <activity android:name=".youractivityName" android:screenOrientation="portrait" />

Do you mean full calendar days, or groups of 24 hours?

For simply 24 hours, assuming you're using Python's datetime, then the timedelta object already has a days property:

days = (a - b).days

For calendar days, you'll need to round a down to the nearest day, and b up to the nearest day, getting rid of the partial day on either side:

roundedA = a.replace(hour = 0, minute = 0, second = 0, microsecond = 0)
roundedB = b.replace(hour = 0, minute = 0, second = 0, microsecond = 0)
days = (roundedA - roundedB).days

In dotnet core QueryHelpers.AddQueryString() will accept an IDictionary<string,string> of key-value pairs. To save a few memory allocs and CPU cycles you can use SortedList<,> instead of Dictionary<,>, with an appropriate capacity and items added in sort order...

var queryParams = new SortedList<string,string>(2);
queryParams.Add("abc", "val1");
queryParams.Add("def", "val2");

string requestUri = QueryHelpers.AddQueryString("https://localhost/api", queryParams);

For a non-angular general answer for those who land on this question from Google:

Every time you face this error its probably because of a memory leak or difference between how Node <= 10 and Node > 10 manage memory. Usually just increasing the memory allocated to Node will allow your program to run but may not actually solve the real problem and the memory used by the node process could still exceed the new memory you allocate. I'd advise profiling memory usage in your node process when it starts running or updating to node > 10.

I had a memory leak. Here is a great article on debugging memory leaks in node.

That said, to increase the memory, in the terminal where you run your Node process:

export NODE_OPTIONS="--max-old-space-size=8192"

where values of max-old-space-size can be: [2048, 4096, 8192, 16384] etc

[UPDATE] More examples for further clarity:

export NODE_OPTIONS="--max-old-space-size=5120" #increase to 5gb
export NODE_OPTIONS="--max-old-space-size=6144" #increase to 6gb
export NODE_OPTIONS="--max-old-space-size=7168" #increase to 7gb
export NODE_OPTIONS="--max-old-space-size=8192" #increase to 8gb

# and so on...

# formula:
export NODE_OPTIONS="--max-old-space-size=(X * 1024)" #increase to Xgb

# Note: it doesn't have to be multiples of 1024. 
# max-old-space-size can be any number of memory megabytes(MB) you have available.

Besides CMAKE_GENERATOR_PLATFORM variable, there is also the -A switch

cmake -G "Visual Studio 16 2019" -A Win32
cmake -G "Visual Studio 16 2019" -A x64

https://cmake.org/cmake/help/v3.16/generator/Visual%20Studio%2016%202019.html#platform-selection

  -A <platform-name>           = Specify platform name if supported by
                                 generator.

This worked for me:

var new_number = float.toFixed(2);

Example:

var my_float = 0.6666

my_float.toFixed(3) # => 0.667

You can also try to reset visual studio setting

1. Open Visual Studio Command Prompt

2. Enter command Devenv /ResetSettings

It will remove already saved TFS account and ask for credentials

Update on the Library/Formula/postgresql.rb line 8 to

http://ftp2.uk.postgresql.org/sites/ftp.postgresql.org/source/v8.4.6/postgresql-8.4.6.tar.bz2

And MD5 on line 9 to

fcc3daaf2292fa6bf1185ec45e512db6

Save and exit.

brew install postgres
initdb /usr/local/var/postgres

Now in this stage you might face the postgresql could not create shared memory segment error, to work around that update the /etc/sysctl.conf like this:

kern.sysv.shmall=65536
kern.sysv.shmmax=16777216

Try initdb /usr/local/var/postgres again, and it should run smooth.

To run postgresql on start

launchctl load -w /usr/local/Cellar/postgresql/8.4.6/org.postgresql.postgres.plist

Hope that helps :)

What Tyler Rinker says is correct:

AQ2 <- airquality
AQ2[is.na(AQ2)] <- 0

will do just this.

What you are originally doing is that you are taking from airquality all those rows (cases) that are complete. So, all the cases that do not have any NA's in them, and keep only those.

<?php
    // Sapan Mohanty
    // Skype:sapan.mohannty
    //***********************************
    $oldData = mysql_connect('localhost', 'DBUSER', 'DBPASS');
    echo mysql_error();
    $NewData = mysql_connect('localhost', 'DBUSER', 'DBPASS');
    echo mysql_error();
    mysql_select_db('OLDDBNAME', $oldData );
    mysql_select_db('NEWDBNAME', $NewData );
    $getAllTablesName    = "SELECT table_name FROM information_schema.tables WHERE table_type = 'base table'";
    $getAllTablesNameExe = mysql_query($getAllTablesName);
    //echo mysql_error();
    while ($dataTableName = mysql_fetch_object($getAllTablesNameExe)) {

        $oldDataCount       = mysql_query('select count(*) as noOfRecord from ' . $dataTableName->table_name, $oldData);
        $oldDataCountResult = mysql_fetch_object($oldDataCount);


        $newDataCount       = mysql_query('select count(*) as noOfRecord from ' . $dataTableName->table_name, $NewData);
        $newDataCountResult = mysql_fetch_object($newDataCount);

        if ( $oldDataCountResult->noOfRecord != $newDataCountResult->noOfRecord ) {
            echo "<br/><b>" . $dataTableName->table_name . "</b>";
            echo " | Old: " . $oldDataCountResult->noOfRecord;
            echo " | New: " . $newDataCountResult->noOfRecord;

            if ($oldDataCountResult->noOfRecord < $newDataCountResult->noOfRecord) {
                echo " | <font color='green'>*</font>";

            } else {
                echo " | <font color='red'>*</font>";
            }

            echo "<br/>----------------------------------------";

        }     

    }
    ?>

What worked for me was to create a new report from scratch.

This done and the new report working, I will compare the 2 .rdl files in Visual Studio. These are in XML format and I am hoping a quick WindDiff or something would reveal what the issue was.

An initial look shows there are 700 lines of code or a bit more difference between both files, with the larger of the 2 being the faulty file. A cursory look at the TablixHeader tags didn't reveal anything obvious.

But in my case it was a corrupted .rdl file. This was originally copied from a working report so in the process of removing what wasn't re-used, this could have corrupted it. However, other reports where this same process was done, the headers could repeat when the correct settings were made in Properties.

Hope this helps. If you've got a complex report, this isn't the quick fix but it works.

Perhaps comparing known good XML files to faulty ones on your end would make a good forum post. I'll be trying that on my end.

For .NET 2.0:

list.Find(delegate(Item i) { return i.Property == someValue; });

You're asking for a comparison between a procedural language and a functional language so I feel your question can be answered here: What is the difference between procedural programming and functional programming?

As to why MS created F# the answer is simply: Creating a functional language with access to the .Net library simply expanded their market base. And seeing how the syntax is nearly identical to OCaml, it really didn't require much effort on their part.

If you have a xml like below

<e:Envelope
    xmlns:d = "http://www.w3.org/2001/XMLSchema"
    xmlns:e = "http://schemas.xmlsoap.org/soap/envelope/"
    xmlns:wn0 = "http://systinet.com/xsd/SchemaTypes/"
    xmlns:i = "http://www.w3.org/2001/XMLSchema-instance">
    <e:Header>
        <Friends>
            <friend>
                <Name>Testabc</Name>
                <Age>12121</Age>
                <Phone>Testpqr</Phone>
            </friend>
        </Friends>
    </e:Header>
    <e:Body>
        <n0:ForAnsiHeaderOperResponse xmlns:n0 = "http://systinet.com/wsdl/com/magicsoftware/ibolt/localhost/ForAnsiHeader/ForAnsiHeaderImpl#ForAnsiHeaderOper?KExqYXZhL2xhbmcvU3RyaW5nOylMamF2YS9sYW5nL1N0cmluZzs=">
            <response i:type = "d:string">12--abc--pqr</response>
        </n0:ForAnsiHeaderOperResponse>
    </e:Body>
</e:Envelope>

and wanted to extract the below xml

<e:Header>
   <Friends>
      <friend>
         <Name>Testabc</Name>
         <Age>12121</Age>
         <Phone>Testpqr</Phone>
      </friend>
   </Friends>
</e:Header>

The below code helps to achieve the same

public static void main(String[] args) {

    File fXmlFile = new File("C://Users//abhijitb//Desktop//Test.xml");
    DocumentBuilderFactory dbf = DocumentBuilderFactory.newInstance();
    Document document;
    Node result = null;
    try {
        document = dbf.newDocumentBuilder().parse(fXmlFile);
        XPath xPath = XPathFactory.newInstance().newXPath();
        String xpathStr = "//Envelope//Header";
        result = (Node) xPath.evaluate(xpathStr, document, XPathConstants.NODE);
        System.out.println(nodeToString(result));
    } catch (SAXException | IOException | ParserConfigurationException | XPathExpressionException
            | TransformerException e) {
        e.printStackTrace();
    }
}

private static String nodeToString(Node node) throws TransformerException {
    StringWriter buf = new StringWriter();
    Transformer xform = TransformerFactory.newInstance().newTransformer();
    xform.setOutputProperty(OutputKeys.OMIT_XML_DECLARATION, "yes");
    xform.transform(new DOMSource(node), new StreamResult(buf));
    return (buf.toString());
}

Now if you want only the xml like below

<Friends>
   <friend>
      <Name>Testabc</Name>
      <Age>12121</Age>
      <Phone>Testpqr</Phone>
   </friend>
</Friends>

You need to change the

String xpathStr = "//Envelope//Header"; to String xpathStr = "//Envelope//Header/*";

To get an actual working example going that returns what one would expect:

var startdate = "20.03.2014";
var new_date = moment(startdate, "DD.MM.YYYY");
var thing = new_date.add(5, 'days').format('DD/MM/YYYY');
window.console.log(thing)

First off, see How Big can a Python Array Get? and Numpy, problem with long arrays

Second, the only real limit comes from the amount of memory you have and how your system stores memory references. There is no per-list limit, so Python will go until it runs out of memory. Two possibilities:

1. If you are running on an older OS or one that forces processes to use a limited amount of memory, you may need to increase the amount of memory the Python process has access to.
2. Break the list apart using chunking. For example, do the first 1000 elements of the list, pickle and save them to disk, and then do the next 1000. To work with them, unpickle one chunk at a time so that you don't run out of memory. This is essentially the same technique that databases use to work with more data than will fit in RAM.

String String_firstNumber = JOptionPane.showInputDialog("Input  Semisecond");
int Int_firstNumber = Integer.parseInt(firstNumber);

Now your Int_firstnumber contains integer value of String_fristNumber.

hope it helped

For complex splitting you could use a regex creating a match collection.

I use #3. Same for long lists, tuples, etc. It doesn't require adding any extra spaces beyond the indentations. As always, be consistent.

mydict = {
    "key1": 1,
    "key2": 2,
    "key3": 3,
}

mylist = [
    (1, 'hello'),
    (2, 'world'),
]

nested = {
    a: [
        (1, 'a'),
        (2, 'b'),
    ],
    b: [
        (3, 'c'),
        (4, 'd'),
    ],
}

Similarly, here's my preferred way of including large strings without introducing any whitespace (like you'd get if you used triple-quoted multi-line strings):

data = (
    "iVBORw0KGgoAAAANSUhEUgAAABAAAAAQCAYAAAAf8/9hAAAABG"
    "l0RVh0U29mdHdhcmUAQWRvYmUgSW1hZ2VSZWFkeXHJZTwAAAEN"
    "xBRpFYmctaKCfwrBSCrRLuL3iEW6+EEUG8XvIVjYWNgJdhFjIX"
    "rz6pKtPB5e5rmq7tmxk+hqO34e1or0yXTGrj9sXGs1Ib73efh1"
    "AAAABJRU5ErkJggg=="
)

You can also run Chrome with JavaScript disabled by default by using the flag:

-disable-javascript

You would use this for example by running Chrome like this:

C:\Documents and Settings\%username%\Local Settings\Application Data\Google\Chrome" -disable-javascript

thanks php-b-grader !

below the generic function for window.open pass values using POST:

function windowOpenInPost(actionUrl,windowName, windowFeatures, keyParams, valueParams) 
{
    var mapForm = document.createElement("form");
    var milliseconds = new Date().getTime();
    windowName = windowName+milliseconds;
    mapForm.target = windowName;
    mapForm.method = "POST";
    mapForm.action = actionUrl;
    if (keyParams && valueParams && (keyParams.length == valueParams.length)){
        for (var i = 0; i < keyParams.length; i++){
        var mapInput = document.createElement("input");
            mapInput.type = "hidden";
            mapInput.name = keyParams[i];
            mapInput.value = valueParams[i];
            mapForm.appendChild(mapInput);

        }
        document.body.appendChild(mapForm);
    }


    map = window.open('', windowName, windowFeatures);
if (map) {
    mapForm.submit();
} else {
    alert('You must allow popups for this map to work.');
}}

It worked for me after adding the following dependency in pom,

<dependency>
 <groupId>org.hibernate</groupId>
 <artifactId>hibernate-validator</artifactId>
 <version>4.3.0.Final</version>
</dependency>

This works for MVC 5

@Html.ActionLink("LinkText", "ActionName", new { id = item.id }, new { @class = "btn btn-success" })

This is impossible as you cannot return from an asynchronous call inside a synchronous method.

In this case you need to pass a callback to foo that will receive the return value

function foo(address, fn){
  geocoder.geocode( { 'address': address}, function(results, status) {
     fn(results[0].geometry.location); 
  });
}

foo("address", function(location){
  alert(location); // this is where you get the return value
});

The thing is, if an inner function call is asynchronous, then all the functions 'wrapping' this call must also be asynchronous in order to 'return' a response.

If you have a lot of callbacks you might consider taking the plunge and use a promise library like Q.

In the default configuration of a SQL Server database, string comparisons are case-insensitive. If your database overrides this setting (through the use of an alternate collation), then you'll need to specify what sort of collation to use in your query.

SELECT * FROM myTable WHERE myField = 'sOmeVal' COLLATE SQL_Latin1_General_CP1_CI_AS

Note that the collation I provided is just an example (though it will more than likely function just fine for you). A more thorough outline of SQL Server collations can be found here.

If you want to examine elements inside a dataframe you should not be using ls() which only looks at the names of objects in the current workspace (or if used inside a function in the current environment). Rownames or elements inside such objects are not visible to ls() (unless of course you add an environment argument to the ls(.)-call). Try using grep() which is the workhorse function for pattern matching of character vectors:

result <- a[ grep("blue", a$x) , ]  # Note need to use `a$` to get at the `x`

If you want to use subset then consider the closely related function grepl() which returns a vector of logicals can be used in the subset argument:

subset(a, grepl("blue", a$x))
      x
2 blue1
3 blue2

Edit: Adding one "proper" use of glob2rx within subset():

result <- subset(a,  grepl(glob2rx("blue*") , x) )
result
      x
2 blue1
3 blue2

I don't think I actually understood glob2rx until I came back to this question. (I did understand the scoping issues that were ar the root of the questioner's difficulties. Anybody reading this should now scroll down to Gavin's answer and upvote it.)

There is a pretty library at http://256stuff.com/sources/md5/, with example of use. This is the simplest library for MD5.

In your_controller write this...

public function update_title() 
{   
    $data = array
      (
        'table_id' => $this->input->post('table_id'),
        'table_title' => $this->input->post('table_title')
      );

    $this->load->model('your_model'); // First load the model
    if($this->your_model->update_title($data)) // call the method from the controller
    {
        // update successful...
    }
    else
    {
        // update not successful...
    }

}

While in your_model...

public function update_title($data)
{
   $this->db->set('table_title',$data['title'])
         ->where('table_id',$data['table_id'])
        ->update('your_table');
}

This will works fine...

I recommend a clean shutdown with the exit(0) builtin rather than using sys.exit()

I'm not sure if this is good advice.

The very documentation mentioned reads:

The site module (which is imported automatically during startup, except if the -S command-line option is given) adds several constants to the built-in namespace. They are useful for the interactive interpreter shell and should not be used in programs.

Then:

exit(code=None)

Objects that when printed, print a message like “Use quit() or Ctrl-D (i.e. EOF) to exit”, and when called, raise SystemExit with the specified exit code.

If we compare it to sys.exit() documentation, it's using the same mechanism which is raising a SystemExit exception.

if you inherited this code, it could be that the dependencies and versions were locked and you have a ./npm-shrinkwrap.json file.

if your dependency is not listed in that file, it will never get installed with the npm install command.

you will need to manually install the packages and then run npm shrinkwrap to update the shrinkwrap file.

A component cannot update its own props unless they are arrays or objects (having a component update its own props even if possible is an anti-pattern), but can update its state and the props of its children.

For instance, a Dashboard has a speed field in its state, and passes it to a Gauge child thats displays this speed. Its render method is just return <Gauge speed={this.state.speed} />. When the Dashboard calls this.setState({speed: this.state.speed + 1}), the Gauge is re-rendered with the new value for speed.

Just before this happens, Gauge's componentWillReceiveProps is called, so that the Gauge has a chance to compare the new value to the old one.

This is how i registered my domain:

sudo letsencrypt --apache -d mydomain.com

Then it was possible to use the same command with additional domains and follow the instructions:

sudo letsencrypt --apache -d mydomain.com,x.mydomain.com,y.mydomain.com

If someone need to do it with one command after install, run this !

sed -i 's/<policy domain="coder" rights="none" pattern="PDF" \/>/<policy domain="coder" rights="read|write" pattern="PDF" \/>/g' /etc/ImageMagick-6/policy.xml

You can also use Uploadify, which is a great jQuery upload plugin, it let's you upload multiple files, and also style the file fields easily. http://www.uploadify.com

Just add the following rules to the parent element:

display: flex;
justify-content: center; /* align horizontal */
align-items: center; /* align vertical */

Here's a sample demo (Resize window to see the image align)

Browser support for Flexbox nowadays is quite good.

For cross-browser compatibility for display: flex and align-items, you can add the older flexbox syntax as well:

display: -webkit-box;
display: -webkit-flex;
display: -moz-box;
display: -ms-flexbox;
display: flex;
-webkit-flex-align: center;
-ms-flex-align: center;
-webkit-align-items: center;
align-items: center;

As Josh has stated above, you want to give each one the same name (letter, button, etc.) and all of them work. Then you want to surround all of these with a form tag:

<form name="myLetters" action="yourScript.php" method="POST">
<!-- Enter your values here with the following syntax: -->
<input type="radio" name="letter" value="A" /> A
<!-- Then add a submit value & close your form -->
<input type="submit" name="submit" value="Choose Letter!" />
</form>

Then, in the PHP script "yourScript.php" as defined by the action attribute, you can use:

$_POST['letter']

To get the value chosen.

http://www.allegro.cc/

http://en.wikipedia.org/wiki/Allegro_library

Using a custom attribute (implemented with a directive) is perhaps the cleanest way. Here's my version, based on @Josh and @sean's suggestions.

angular.module('mymodule', [])

// Click to navigate
// similar to <a href="#/partial"> but hash is not required, 
// e.g. <div click-link="/partial">
.directive('clickLink', ['$location', function($location) {
    return {
        link: function(scope, element, attrs) {
            element.on('click', function() {
                scope.$apply(function() {
                    $location.path(attrs.clickLink);
                });
            });
        }
    }
}]);

It has some useful features, but I'm new to Angular so there's probably room for improvement.

Just wondering if anyone still needs it to be done.

For them: you can use RoundedBitmapDrawable for your purpose.

Sample Code:

ImageView profilePic = (ImageView) findViewById(R.idimageView);

RoundedBitmapDrawable roundedBitmapDrawable = RoundedBitmapDrawableFactory.create(this.getResources(),bitmap);
roundedBitmapDrawable.setCircular(true);
profilePic.setImageDrawable(roundedBitmapDrawable);

where bitmap is the image you want to load in imageView.

Best Firefox Addon to disable CORS as of September 2016: https://github.com/fredericlb/Force-CORS/releases

You can even configure it by Referrers (Website).

As for your update, I was confused for the reasoning behind in. Dug a little deeper and found this gem:

• yoursite.com becomes yoursite.com/
• yoursite.com/ is a directory, so the welcome-file-list is scanned
• yoursite.com/CMS is the first welcome-file ("CMS" in the welcome-file-list), and there is a mapping of /CMS to the MyCMS servlet, so that servlet is accessed.

Source: http://wiki.metawerx.net/wiki/HowToUseAServletAsYourMainWebPage

So, the mapping then does make sense.

And one can now freely use ${pageContext.request.contextPath}/path/ as src/href for relative links!

This did the trick for me coming from Brackets and being used to ctrl+/ on the numpad.

[
    { "keys": ["ctrl+keypad_divide"], "command": "toggle_comment", "args": { "block": false } },
    { "keys": ["ctrl+shift+keypad_divide"], "command": "toggle_comment", "args": { "block": true } }
]

The warning indicates that you're not returning something at the end of your map arrow function in every case.

A better approach to what you're trying to accomplish is first using a .filter and then a .map, like this:

this.props.comments
  .filter(commentReply => commentReply.replyTo === comment.id)
  .map((commentReply, idx) => <CommentItem key={idx} className="SubComment"/>);

try this can you better fell comparing to another codes.

using namespace std;
int main() {
    int a[5]={4,6,3,5,9};
    for(int i=4;i>=0;i--) {
        cout<<"\n"<<a[i];
    }
}

You can create bitmap with captured image as below:

Bitmap bitmap = Bitmap.createScaledBitmap(capturedImage, width, height, true);

Here you can specify width and height of the bitmap that you want to set to your ImageView. The height and width you can set according to the screen dpi of the device also, by reading the screen dpi of different devices programmatically.

We released a package, roperators, to help with this kind of thing. You can read more about it here: https://happylittlescripts.blogspot.com/2018/09/make-your-r-code-nicer-with-roperators.html

install.packages('roperators')
require(roperators)

x <- 1:3
x %+=% 1; x
x %-=% 3; x
y <- c('a', 'b', 'c')
y %+=% 'text'; y
y %-=% 'text'; y

# etc

Consider you are designing a simple function, which gets an object of type Bird and calls its walk() method. There are two approaches you can think of:

1. This is my function, and I must be sure that it only accepts the Bird, or the code will not compile. If anyone wants to use my function, they must be aware that I only accept Birds
2. My function gets any objects and I just call the object's walk() method. So, if the object can walk() it is correct, if it can't my function will fail. So here it is not important the object is a Bird or anything else, it is important that it can walk() (This is duck typing)

It must be considered that the duck typing may be useful in some cases, for example Python uses duck typing a lot.

Useful reading

• There are good examples of duck typing for Java, Python, JavaScript etc at https://en.wikipedia.org/wiki/Duck_typing
• Here is also a good answer which describes the advantages of dynamic typing and also its disadvantages: What is the supposed productivity gain of dynamic typing?

Try closing Android Studio/Eclipse if it's open. It worked for me.

When it can be the same header for all requests or you dispose the client after each request you can use the DefaultRequestHeaders.Add option:

client.DefaultRequestHeaders.Add("apikey","xxxxxxxxx");      

Although this does not help you right away, there is an alternative that can work with both Unix (fcntl) and Windows (win32 api calls), called: portalocker

It describes itself as a cross-platform (posix/nt) API for flock-style file locking for Python. It basically maps fcntl to win32 api calls.

The original code at http://code.activestate.com/recipes/65203/ can now be installed as a separate package - https://pypi.python.org/pypi/portalocker

Without jQuery:

textContent:

var text = document.querySelector('.someClassname').textContent;

Markup:

var text = document.querySelector('.someClassname').innerHTML;

Markup including the matched element:

var text = document.querySelector('.someClassname').outerHTML;

though outerHTML may not be supported by all browsers of interest and document.querySelector requires IE 8 or higher.

Seems that EditText apply the hintTextColor only if the text is empty. So simple solution will be like this

Editable text = mEditText.getText();
mEditText.setText(null);
mEditText.setHintTextColor(color);
mEditText.setText(text);

If you have multiple fields, you can extend the EditText and write a method which executes this logic and use that method instead.

create LOGIN guest WITH PASSWORD='guest@123', CHECK_POLICY = OFF;

Be sure when you want to exceute the following

DENY VIEW ANY DATABASE TO guest;

ALTER AUTHORIZATION ON DATABASE::BiddingSystemDB TO guest

Selected Database should be Master

Here is SurlyDre's stored procedure modified so that foreign keys are ignored:

DROP PROCEDURE IF EXISTS `drop_all_tables`;

DELIMITER $$
CREATE PROCEDURE `drop_all_tables`()
BEGIN
    DECLARE _done INT DEFAULT FALSE;
    DECLARE _tableName VARCHAR(255);
    DECLARE _cursor CURSOR FOR
        SELECT table_name 
        FROM information_schema.TABLES
        WHERE table_schema = SCHEMA();
    DECLARE CONTINUE HANDLER FOR NOT FOUND SET _done = TRUE;

    SET FOREIGN_KEY_CHECKS = 0;

    OPEN _cursor;

    REPEAT FETCH _cursor INTO _tableName;

    IF NOT _done THEN
        SET @stmt_sql = CONCAT('DROP TABLE ', _tableName);
        PREPARE stmt1 FROM @stmt_sql;
        EXECUTE stmt1;
        DEALLOCATE PREPARE stmt1;
    END IF;

    UNTIL _done END REPEAT;

    CLOSE _cursor;
    SET FOREIGN_KEY_CHECKS = 1;
END$$

DELIMITER ;

call drop_all_tables(); 

DROP PROCEDURE IF EXISTS `drop_all_tables`;

.communicate() writes input (there is no input in this case so it just closes subprocess' stdin to indicate to the subprocess that there is no more input), reads all output, and waits for the subprocess to exit.

The exception EOFError is raised in the child process by raw_input() (it expected data but got EOF (no data)).

p.stdout.read() hangs forever because it tries to read all output from the child at the same time as the child waits for input (raw_input()) that causes a deadlock.

To avoid the deadlock you need to read/write asynchronously (e.g., by using threads or select) or to know exactly when and how much to read/write, for example:

from subprocess import PIPE, Popen

p = Popen(["python", "-u", "1st.py"], stdin=PIPE, stdout=PIPE, bufsize=1)
print p.stdout.readline(), # read the first line
for i in range(10): # repeat several times to show that it works
    print >>p.stdin, i # write input
    p.stdin.flush() # not necessary in this case
    print p.stdout.readline(), # read output

print p.communicate("n\n")[0], # signal the child to exit,
                               # read the rest of the output, 
                               # wait for the child to exit

Note: it is a very fragile code if read/write are not in sync; it deadlocks.

Beware of block-buffering issue (here it is solved by using "-u" flag that turns off buffering for stdin, stdout in the child).

bufsize=1 makes the pipes line-buffered on the parent side.

JAVA 8 and Above Answer (Using Lambda Expressions)

In Java 8, Lambda expressions were introduced to make this even easier! Instead of creating a Comparator() object with all of it's scaffolding, you can simplify it as follows: (Using your object as an example)

Collections.sort(list, (ActiveAlarm a1, ActiveAlarm a2) -> a1.timeStarted-a2.timeStarted);

or even shorter:

Collections.sort(list, Comparator.comparingInt(ActiveAlarm ::getterMethod));

That one statement is equivalent to the following:

Collections.sort(list, new Comparator<ActiveAlarm>() {
    @Override
    public int compare(ActiveAlarm a1, ActiveAlarm a2) {
        return a1.timeStarted - a2.timeStarted;
    }
});

Think of Lambda expressions as only requiring you to put in the relevant parts of the code: the method signature and what gets returned.

Another part of your question was how to compare against multiple fields. To do that with Lambda expressions, you can use the .thenComparing() function to effectively combine two comparisons into one:

Collections.sort(list, (ActiveAlarm a1, ActiveAlarm a2) -> a1.timeStarted-a2.timeStarted             
       .thenComparing ((ActiveAlarm a1, ActiveAlarm a2) -> a1.timeEnded-a2.timeEnded)
);

The above code will sort the list first by timeStarted, and then by timeEnded (for those records that have the same timeStarted).

One last note: It is easy to compare 'long' or 'int' primitives, you can just subtract one from the other. If you are comparing objects ('Long' or 'String'), I suggest you use their built-in comparison. Example:

Collections.sort(list, (ActiveAlarm a1, ActiveAlarm a2) -> a1.name.compareTo(a2.name) );

EDIT: Thanks to Lukas Eder for pointing me to .thenComparing() function.

NullPointerException with JSP can also happen if:

A getter returns a non-public inner class.

This code will fail if you remove Getters's access modifier or make it private or protected.

JAVA:

package com.myPackage;
public class MyClass{ 
    //: Must be public or you will get:
    //: org.apache.jasper.JasperException: 
    //: java.lang.NullPointerException
    public class Getters{
        public String 
        myProperty(){ return(my_property); }
    };;

    //: JSP EL can only access functions:
    private Getters _get;
    public  Getters  get(){ return _get; }

    private String 
    my_property;

    public MyClass(String my_property){
        super();
        this.my_property    = my_property;
        _get = new Getters();
    };;
};;

JSP

<%@ taglib uri   ="http://java.sun.com/jsp/jstl/core" prefix="c" %>
<%@ page import="com.myPackage.MyClass" %>
<%
    MyClass inst = new MyClass("[PROP_VALUE]");
    pageContext.setAttribute("my_inst", inst ); 
%><html lang="en"><body>
    ${ my_inst.get().myProperty() }
</body></html>

Open config file to edit :

git config --global --edit

Press Insert and remove the setting

and finally type :wq and Enter to save.

Three Step Process: First: open Terminal->$ whereis java it would give output like this: java: /usr/bin/java /usr/share/java /usr/share/man/man1/java.1.gz

Second: ls -l /usr/bin/java It would give output like this: lrwxrwxrwx 1 root root 22 Feb 9 10:59 /usr/bin/java -> /etc/alternatives/java

Third: ls -l /etc/alternatives/java output is the JDK path: lrwxrwxrwx 1 root root 46 Feb 9 10:59 /etc/alternatives/java -> /usr/lib/jvm/java-8-openjdk-amd64/jre/bin/java

Another alternative

I have two plots side by side and would like to adjust tick labels separately.

The above solutions were close however they were not working out for me. I found my solution from this matplotlib page.

ax.xaxis.set_tick_params(labelsize=20)

This did the trick and was straight to the point. For my use case, it was the plot on the right that needed to be adjusted. For the plot on the left since I was creating new tick labels I was able to adjust the font in the same process as seting the labels.

ie

ax1.set_xticklabels(ax1_x, fontsize=15)
ax1.set_yticklabels(ax1_y, fontsize=15)

thus I used for the right plot,

ax2.xaxis.set_tick_params(labelsize=24)
ax2.yaxis.set_tick_params(labelsize=24)

A minor subtlety... I know... but I hope this helps someone :)

Bonus points if anyone knows how to adjust the font size of the order of magnitude label.

SSIS (SQL Server Integration Services) is an upgrade of DTS (Data Transformation Services), which is a feature of the previous version of SQL Server. SSIS packages can be created in BIDS (Business Intelligence Development Studio). These can be used to merge data from heterogeneous data sources into SQL Server. They can also be used to populate data warehouses, to clean and standardize data, and to automate administrative tasks.

SQL Server Integration Services (SSIS) is a component of Microsoft SQL Server 2005. It replaces Data Transformation Services, which has been a feature of SQL Server since Version 7.0. Unlike DTS, which was included in all versions, SSIS is only available in the "Standard" and "Enterprise" editions. Integration Services provides a platform to build data integration and workflow applications. The primary use for SSIS is data warehousing as the product features a fast and flexible tool for data extraction, transformation, and loading (ETL).). The tool may also be used to automate maintenance of SQL Server databases, update multidimensional cube data, and perform other functions.

When a Derived class Object is assigned to Base class Object, all the members of derived class object is copied to base class object except the members which are not present in the base class. These members are Sliced away by the compiler. This is called Object Slicing.

Here is an Example:

#include<bits/stdc++.h>
using namespace std;
class Base
{
    public:
        int a;
        int b;
        int c;
        Base()
        {
            a=10;
            b=20;
            c=30;
        }
};
class Derived : public Base
{
    public:
        int d;
        int e;
        Derived()
        {
            d=40;
            e=50;
        }
};
int main()
{
    Derived d;
    cout<<d.a<<"\n";
    cout<<d.b<<"\n";
    cout<<d.c<<"\n";
    cout<<d.d<<"\n";
    cout<<d.e<<"\n";


    Base b = d;
    cout<<b.a<<"\n";
    cout<<b.b<<"\n";
    cout<<b.c<<"\n";
    cout<<b.d<<"\n";
    cout<<b.e<<"\n";
    return 0;
}

It will generate:

[Error] 'class Base' has no member named 'd'
[Error] 'class Base' has no member named 'e'

Here is example code for usage of java's built-in FIFO queue:

public static void main(String[] args) {
    Queue<Integer> myQ = new LinkedList<Integer>();
    myQ.add(1);
    myQ.add(6);
    myQ.add(3);
    System.out.println(myQ);   // 1 6 3
    int first = myQ.poll();    // retrieve and remove the first element
    System.out.println(first); // 1
    System.out.println(myQ);   // 6 3
}

From Federico Culloca's note:

Also you cannot use them inside tags

Means; you have to put the comment at the top or bottom of the file - all the places you really want to add comments are at least inside the top level layout tag

And even simpler using IN:

SELECT ads.*, location.county 
  FROM ads
  LEFT JOIN location ON location.county = ads.county_id
  WHERE ads.published = 1 
        AND ads.type = 13
        AND ads.county_id IN (2,5,7,9)

You can get fairly close with this template struct. However, you need to initialize with expressions that are pointers to T, rather than T; and so, though you can easily make a 'fake_constref_array' similarly, you won't be able to bind that to rvalues as done in the OP's example ('8');

#include <stdio.h>

template<class T, int N> 
struct fake_ref_array {
   T * ptrs[N];
  T & operator [] ( int i ){ return *ptrs[i]; }
};

int A,B,X[3];

void func( int j, int k)
{
  fake_ref_array<int,3> refarr = { &A, &B, &X[1] };
  refarr[j] = k;  // :-) 
   // You could probably make the following work using an overload of + that returns
   // a proxy that overloads *. Still not a real array though, so it would just be
   // stunt programming at that point.
   // *(refarr + j) = k  
}

int
main()
{
    func(1,7);  //B = 7
    func(2,8);     // X[1] = 8
    printf("A=%d B=%d X = {%d,%d,%d}\n", A,B,X[0],X[1],X[2]);
        return 0;
}

--> A=0 B=7 X = {0,8,0}

Is there a better way to implement this now with Recyclerview now?

Yes.

When you use a RecyclerView, you need to specify a LayoutManager that is responsible for laying out each item in the view. The LinearLayoutManager allows you to specify an orientation, just like a normal LinearLayout would.

To create a horizontal list with RecyclerView, you might do something like this:

LinearLayoutManager layoutManager
    = new LinearLayoutManager(this, LinearLayoutManager.HORIZONTAL, false);

RecyclerView myList = (RecyclerView) findViewById(R.id.my_recycler_view);
myList.setLayoutManager(layoutManager);

in general put a __iter__ method in your class and iterate through the object attributes or put this mixin class in your class.

class IterMixin(object):
    def __iter__(self):
        for attr, value in self.__dict__.iteritems():
            yield attr, value

Your class:

>>> class YourClass(IterMixin): pass
...
>>> yc = YourClass()
>>> yc.one = range(15)
>>> yc.two = 'test'
>>> dict(yc)
{'one': [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14], 'two': 'test'}

From Xcode v4.3, it is being installed as application. The simulator is available at

/Applications/Xcode.app/Contents/Developer/Platforms/iPhoneSimulator.platform/Developer/Applications/iOS\ Simulator.app/

TextBoxFor: It will render like text input html element corresponding to specified expression. In simple word it will always render like an input textbox irrespective datatype of the property which is getting bind with the control.

EditorFor: This control is bit smart. It renders HTML markup based on the datatype of the property. E.g. suppose there is a boolean property in model. To render this property in the view as a checkbox either we can use CheckBoxFor or EditorFor. Both will be generate the same markup.

What is the advantage of using EditorFor?

As we know, depending on the datatype of the property it generates the html markup. So suppose tomorrow if we change the datatype of property in the model, no need to change anything in the view. EditorFor control will change the html markup automatically.

sdas is being read as a variable. To input a string you need " "

Evidence that std::unordered_map uses a hash map in GCC stdlibc++ 6.4

This was mentioned at: https://stackoverflow.com/a/3578247/895245 but in the following answer: What data structure is inside std::map in C++? I have given further evidence of such for the GCC stdlibc++ 6.4 implementation by:

• GDB step debugging into the class
• performance characteristic analysis

Here is a preview of the performance characteristic graph described in that answer:

How to use a custom class and hash function with unordered_map

This answer nails it: C++ unordered_map using a custom class type as the key

Excerpt: equality:

struct Key
{
  std::string first;
  std::string second;
  int         third;

  bool operator==(const Key &other) const
  { return (first == other.first
            && second == other.second
            && third == other.third);
  }
};

Hash function:

namespace std {

  template <>
  struct hash<Key>
  {
    std::size_t operator()(const Key& k) const
    {
      using std::size_t;
      using std::hash;
      using std::string;

      // Compute individual hash values for first,
      // second and third and combine them using XOR
      // and bit shifting:

      return ((hash<string>()(k.first)
               ^ (hash<string>()(k.second) << 1)) >> 1)
               ^ (hash<int>()(k.third) << 1);
    }
  };

}

This works:

#include <iostream>
#include <math.h>
using namespace std;

int main ()
{
  char ch='a';
  double val = nan(&ch);
  if(isnan(val))
     cout << "isnan" << endl;

  return 0;
}

output: isnan

If you need to work with indices of a sequence, then yes - you use it... eg for the equivalent of numpy.argsort...:

>>> a = [6, 3, 1, 2, 5, 4]
>>> sorted(range(len(a)), key=a.__getitem__)
[2, 3, 1, 5, 4, 0]

Following on from kR105's reply above:

My problem was similar to that of the OP (Original Poster), only occurred outside a table, so the subclasses were not called from within the scope of the parent class (the table), but outside of it, so I had to ADD selectors, as kR105 mentioned.

Here was the problem: I had two boxes (divs), each with the same border-radius (HTML5), padding and margin, but needed to make them different colors. Rather than repeat those 3 parameters for each color class, I wanted a "superclass" to contain border-radius/padding/margin, then just individual "subclasses" to express their differences (double quotes around each as they're not really subclasses - see my later post). Here's how it worked out:

HTML:

<body>
  <div class="box box1"> Hello my color is RED </div>
  <div class="box box2"> Hello my color is BLUE </div>
</body>

CSS:

div.box {border-radius:20px 20px 20px 20px; padding:10px; margin:10px}
div.box1 {border:3px solid red; color:red}
div.box2 {border:3px solid blue; color:blue}

Hope someone finds this helpful.

Java 7+, commons.io

public final class ZipUtils {

    public static void zipFolder(final File folder, final File zipFile) throws IOException {
        zipFolder(folder, new FileOutputStream(zipFile));
    }

    public static void zipFolder(final File folder, final OutputStream outputStream) throws IOException {
        try (ZipOutputStream zipOutputStream = new ZipOutputStream(outputStream)) {
            processFolder(folder, zipOutputStream, folder.getPath().length() + 1);
        }
    }

    private static void processFolder(final File folder, final ZipOutputStream zipOutputStream, final int prefixLength)
            throws IOException {
        for (final File file : folder.listFiles()) {
            if (file.isFile()) {
                final ZipEntry zipEntry = new ZipEntry(file.getPath().substring(prefixLength));
                zipOutputStream.putNextEntry(zipEntry);
                try (FileInputStream inputStream = new FileInputStream(file)) {
                    IOUtils.copy(inputStream, zipOutputStream);
                }
                zipOutputStream.closeEntry();
            } else if (file.isDirectory()) {
                processFolder(file, zipOutputStream, prefixLength);
            }
        }
    }
}

If possible, for special things like this, I like to use CLR functions.

In this case:

[Microsoft.SqlServer.Server.SqlFunction]
    public static SqlDateTime DateOnly(SqlDateTime input)
    {
        if (!input.IsNull)
        {
            SqlDateTime dt = new SqlDateTime(input.Value.Year, input.Value.Month, input.Value.Day, 0, 0, 0);

            return dt;
        }
        else
            return SqlDateTime.Null;
    }

I've noticed bizarre behavior with Eclipse version 4.2.1 delivering me this error:

String cannot be resolved to a variable

With this Java code:

if (true)
    String my_variable = "somevalue";
    System.out.println("foobar");

You would think this code is very straight forward, the conditional is true, we set my_variable to somevalue. And it should print foobar. Right?

Wrong, you get the above mentioned compile time error. Eclipse is trying to prevent you from making a mistake by assuming that both statements are within the if statement.

If you put braces around the conditional block like this:

if (true){
    String my_variable = "somevalue"; }
    System.out.println("foobar");

Then it compiles and runs fine. Apparently poorly bracketed conditionals are fair game for generating compile time errors now.

I was struggling for a while with this as my work computer (with Windows 10) created the default user library on a network drive, which would slow down R and RStudio to an unusable state.

In case this helps someone, this is the easiest way I found, without requiring admin rights:

• make sure the directory you want to install your packages into exists. If you want to respect the convention, use: C:\Users\username\R\win-library\rversion (for example, something like: C:\Users\janebloggs\R\win-library\3.6)
• create a .Renviron file in your home directory (which might be on the network drive?), and in it, write one single line that defines the R_LIBS_USER variable to be your custom path:

R_LIBS_USER=C:\Users\janebloggs\R\win-library\3.6

(feel free to add comments too, with lines starting with #)

If a .Renviron file exists, R will read it at startup and use the variables as they are defined in there, before running the code in the .Rprofile. You can read about it in help(Startup).

Now it should be persistent between sessions!

You cannot supply system properties to the jarsigner.exe tool, unfortunately.

I have submitted defect 7177232, referencing @eckes' defect 7127374 and explaining why it was closed in error.

My defect is specifically about the impact on the jarsigner tool, but perhaps it will lead them to reopening the other defect and addressing the issue properly.

UPDATE: Actually, it turns out that you CAN supply system properties to the Jarsigner tool, it's just not in the help message. Use jarsigner -J-Djsse.enableSNIExtension=false

function invertSign($value)
{
    return -$value;
}

If the length is non zero, you can also

str[str.length() - 1] = '\0';

@Golmaal really answered this, I'm just being a bit more verbose.

<style type="text/css">
    #warning-message { display: none; }
    @media only screen and (orientation:portrait){
        #wrapper { display:none; }
        #warning-message { display:block; }
    }
    @media only screen and (orientation:landscape){
        #warning-message { display:none; }
    }
</style>

....

<div id="wrapper">
    <!-- your html for your website -->
</div>
<div id="warning-message">
    this website is only viewable in landscape mode
</div>

You have no control over the user moving the orientation however you can at least message them. This example will hide the wrapper if in portrait mode and show the warning message and then hide the warning message in landscape mode and show the portrait.

I don't think this answer is any better than @Golmaal , only a compliment to it. If you like this answer, make sure to give @Golmaal the credit.

Update

I've been working with Cordova a lot recently and it turns out you CAN control it when you have access to the native features.

Another Update

So after releasing Cordova it is really terrible in the end. It is better to use something like React Native if you want JavaScript. It is really amazing and I know it isn't pure web but the pure web experience on mobile kind of failed.

try

DOCS="/cygdrive/c/Users/my\ dir/Documents";

cd "$DOCS"

Just wanted to add my 2 cents. The MOST effective way to optimize the URL route generation in an MVC application is... not generate them at all.

Most of us more or less know how URLs are generated in our apps anyway, so simply using static Url.Content("~/Blahblah") instead of Url.Action() or Url.RouteUrl() where possible, beats all other methods by almost 20 times and even more.

PS. I've ran a benchmark of couple of thousand iterations and posted results on my blog if interested.

I wouldn't call those different kind of streams. The Stream class have CanRead and CanWrite properties that tell you if the particular stream can be read from and written to.

The major difference between different stream classes (such as MemoryStream vs FileStream) is the backing store - where the data is read from or where it's written to. It's kind of obvious from the name. A MemoryStream stores the data in memory only, a FileStream is backed by a file on disk, a NetworkStream reads data from the network and so on.

I did manage to figure it out:

$order_meta    = get_post_meta($order_id);
$email         = $order_meta["_shipping_email"][0] ?: $order_meta["_billing_email"][0];

I do know know for sure if the shipping email is part of the metadata, but if so I would rather have it than the billing email - at least for my purposes.

Like Zeeshan Ahmad's answer, I also think ts-node is the way to go. I would also add a shebang and make it executable, so you can just run it directly.

1. Install typescript and ts-node globally:

   npm install -g ts-node typescript
   

   or

   yarn global add ts-node typescript
   

2. Create a file hello with this content:

   #!/usr/bin/env ts-node-script
   
   import * as os from 'os'
   
   function hello(name: string) {
       return 'Hello, ' + name
   }
   const user = os.userInfo().username
   console.log(`Result: ${hello(user)}`)
   

   As you can see, line one has the shebang for ts-node

3. Run directly by just executing the file

   $ ./hello
   Result: Hello, root
   

Some notes:

• This does not seem to work with ES modules, as Dan Dascalescu has pointed out.
• See this issue discussing the best way to make a command line script with package linking, provided by Kaspar Etter. I have improved the shebang accordingly

Update 2020-04-06: Some changes after great input in the comments: Update shebang to use ts-node-script instead of ts-node, link to issues in ts-node.

<script>
    $(document).ready(function(){
        $('#connectBtn').click(function(e){
            e.preventDefault();
        })
    });
</script>

This will prevent the default action.

You can set string limit as below example:

<td>{{str_limit($biodata ->description, $limit = 20, $end = '...')}}</td>

It will display only the 20 letters including whitespaces and ends with ....

Example image

Electron + React Let your two first options be like this

<option hidden="true>Choose Tagging</option>
<option disabled="disabled" default="true">Choose Tagging</option>

First to display when closed Second to display first when the list opens

You don't need jQuery for this, as simple javascript will suffice:

alert(document.domain);

See it in action:

console.log("Output;");  
console.log(location.hostname);
console.log(document.domain);
alert(window.location.hostname)

console.log("document.URL : "+document.URL);
console.log("document.location.href : "+document.location.href);
console.log("document.location.origin : "+document.location.origin);
console.log("document.location.hostname : "+document.location.hostname);
console.log("document.location.host : "+document.location.host);
console.log("document.location.pathname : "+document.location.pathname);

for more details click here window.location

just append "http://" before domain name to get appropriate result.

What worked for me was just typing the command passive and ftp went into passive mode from active mode.

If you're simply outputting text, rather than any binary data, the following will work:

PrintWriter out = new PrintWriter("filename.txt");

Then, write your String to it, just like you would to any output stream:

out.println(text);

You'll need exception handling, as ever. Be sure to call out.close() when you've finished writing.

If you are using Java 7 or later, you can use the "try-with-resources statement" which will automatically close your PrintStream when you are done with it (ie exit the block) like so:

try (PrintWriter out = new PrintWriter("filename.txt")) {
    out.println(text);
}

You will still need to explicitly throw the java.io.FileNotFoundException as before.

If anyone is experiencing this same problem when reading a frame from a webcam:

Verify if your webcam is being used on another task and close it. This wil solve the problem.

I spent some time with this error when I realized my camera was online in a google hangouts group. Also, Make sure your webcam drivers are up to date

You can do following

FIDDLE

<div id="circle"></div>

CSS

#circle {
    width: 100px;
    height: 100px;
    background: red;
    -moz-border-radius: 50px;
    -webkit-border-radius: 50px;
    border-radius: 50px;
}

Other shape SOURCE

NSDictionary -> NSData:

NSData *myData = [NSKeyedArchiver archivedDataWithRootObject:myDictionary];

NSData -> NSDictionary:

NSDictionary *myDictionary = (NSDictionary*) [NSKeyedUnarchiver unarchiveObjectWithData:myData];

You can do following:

private Date getMeYesterday(){
     return new Date(System.currentTimeMillis()-24*60*60*1000);
}

Note: if you want further backward date multiply number of day with 24*60*60*1000 for example:

private Date getPreviousWeekDate(){
     return new Date(System.currentTimeMillis()-7*24*60*60*1000);
}

Similarly, you can get future date by adding the value to System.currentTimeMillis(), for example:

private Date getMeTomorrow(){
     return new Date(System.currentTimeMillis()+24*60*60*1000);
}

There are a few routes. One, the most simple, would involve making that into a form; when it submits you react to POST data and delete the image using unlink

DISCLAIMER: This is not secure. An attacker could use this code to delete any file on your server. You must expand on this demonstration code to add some measure of security, otherwise you can expect bad things.

Each image's display markup would contain a form something like this:

echo '<form method="post">';
  echo '<input type="hidden" value="'.$file.'" name="delete_file" />';
  echo '<input type="submit" value="Delete image" />';
echo '</form>';

...and at at the top of that same PHP file:

if (array_key_exists('delete_file', $_POST)) {
  $filename = $_POST['delete_file'];
  if (file_exists($filename)) {
    unlink($filename);
    echo 'File '.$filename.' has been deleted';
  } else {
    echo 'Could not delete '.$filename.', file does not exist';
  }
}
// existing code continues below...

You can elaborate on this by using javascript: instead of submitting the form, you could send an AJAX request. The server-side code would look rather similar to this.

Documentation and Related Reading

• unlink - http://php.net/manual/en/function.unlink.php
• $_POST - http://php.net/manual/en/reserved.variables.post.php
• file_exists - http://php.net/manual/en/function.file-exists.php
• array_key_exists - http://php.net/manual/en/function.array-key-exists.php
• "Using PHP With HTML Forms" - http://www.tizag.com/phpT/forms.php

Take it from someone who has tried it all three ways... just use a varchar(39)

The slightly less efficient storage far outweighs any benefit of having to convert it on insert/update and format it when showing it anywhere.

Given that your strings are all fixed-length (presumably at compile-time?), you can do the following:

char (*orderedIds)[ID_LEN+1]
    = malloc(variableNumberOfElements * sizeof(*orderedIds));

// Clear-up
free(orderedIds);

A more cumbersome, but more general, solution, is to assign an array of pointers, and psuedo-initialising them to point at elements of a raw backing array:

char *raw = malloc(variableNumberOfElements * (ID_LEN + 1));
char **orderedIds = malloc(sizeof(*orderedIds) * variableNumberOfElements);

// Set each pointer to the start of its corresponding section of the raw buffer.
for (i = 0; i < variableNumberOfElements; i++)
{
    orderedIds[i] = &raw[i * (ID_LEN+1)];
}

...

// Clear-up pointer array
free(orderedIds);
// Clear-up raw array
free(raw);

You need to update the date format:

select * from hockey_stats 
where game_date between '2012-03-11 00:00:00' and '2012-05-11 23:59:00' 
order by game_date desc;

I made a quick project in visual studio 2008 for a .net 3.5 C# windows form application and was able to create the following code. I found events for both the enter and leave methods.

In the InitializeComponent() function. I added the event handler using the Visual Studio designer.

this.button1.MouseLeave += new System.EventHandler( this.button1_MouseLeave );
this.button1.MouseEnter += new System.EventHandler( this.button1_MouseEnter );

In the button event handler methods set the background images.

/// <summary>
/// Handles the MouseEnter event of the button1 control.
/// </summary>
/// <param name="sender">The source of the event.</param>
/// <param name="e">The <see cref="System.EventArgs"/> instance containing the event data.</param>
private void button1_MouseEnter( object sender, EventArgs e )
{
      this.button1.BackgroundImage = ((System.Drawing.Image)(Properties.Resources.img2));
}

/// <summary>
/// Handles the MouseLeave event of the button1 control.
/// </summary>
/// <param name="sender">The source of the event.</param>
/// <param name="e">The <see cref="System.EventArgs"/> instance containing the event data.</param>
private void button1_MouseLeave( object sender, EventArgs e )
{
       this.button1.BackgroundImage = ((System.Drawing.Image)(Properties.Resources.img1));
}

The one-liner version in Python:

$ python -c "import sys; print(sum(int(l) for l in sys.stdin))"

Use not, for example:

return not myval

Spring Boot 1.4 Use this for Javascript HTML Json all compressions.

server.compression.enabled: true
server.compression.mime-types: application/json,application/xml,text/html,text/xml,text/plain,text/css,application/javascript

despite some comments, at some cases it's really necessary to access PHP functions at Javascript (e.g. the AJAX cases).

At these cases you can use the mwsX library to use your PHP functions at Javascript.

mwsX library: https://github.com/loureirorg/mwsx

You need to use DateTime.ParseExact with format "dd/MM/yyyy"

DateTime dt=DateTime.ParseExact("24/01/2013", "dd/MM/yyyy", CultureInfo.InvariantCulture);

Its safer if you use d/M/yyyy for the format, since that will handle both single digit and double digits day/month. But that really depends if you are expecting single/double digit values.

Your date format day/Month/Year might be an acceptable date format for some cultures. For example for Canadian Culture en-CA DateTime.Parse would work like:

DateTime dt = DateTime.Parse("24/01/2013", new CultureInfo("en-CA"));

Or

System.Threading.Thread.CurrentThread.CurrentCulture = new CultureInfo("en-CA");
DateTime dt = DateTime.Parse("24/01/2013"); //uses the current Thread's culture

Both the above lines would work because the the string's format is acceptable for en-CA culture. Since you are not supplying any culture to your DateTime.Parse call, your current culture is used for parsing which doesn't support the date format. Read more about it at DateTime.Parse.

Another method for parsing is using DateTime.TryParseExact

DateTime dt;
if (DateTime.TryParseExact("24/01/2013", 
                            "d/M/yyyy", 
                            CultureInfo.InvariantCulture, 
                            DateTimeStyles.None,
    out dt))
{
    //valid date
}
else
{
    //invalid date
}

The TryParse group of methods in .Net framework doesn't throw exception on invalid values, instead they return a bool value indicating success or failure in parsing.

Notice that I have used single d and M for day and month respectively. Single d and M works for both single/double digits day and month. So for the format d/M/yyyy valid values could be:

• "24/01/2013"
• "24/1/2013"
• "4/12/2013" //4 December 2013
• "04/12/2013"

For further reading you should see: Custom Date and Time Format Strings

If really you can't use Defense Option 1: Prepared Statements (Parameterized Queries) or Defense Option 2: Stored Procedures, don't build your own tool, use the OWASP Enterprise Security API. From the OWASP ESAPI hosted on Google Code:

Don’t write your own security controls! Reinventing the wheel when it comes to developing security controls for every web application or web service leads to wasted time and massive security holes. The OWASP Enterprise Security API (ESAPI) Toolkits help software developers guard against security-related design and implementation flaws.

For more details, see Preventing SQL Injection in Java and SQL Injection Prevention Cheat Sheet.

Pay a special attention to Defense Option 3: Escaping All User Supplied Input that introduces the OWASP ESAPI project).

Elements are added to list using append():

>>> data = {'list': [{'a':'1'}]}
>>> data['list'].append({'b':'2'})
>>> data
{'list': [{'a': '1'}, {'b': '2'}]}

If you want to add element to a specific place in a list (i.e. to the beginning), use insert() instead:

>>> data['list'].insert(0, {'b':'2'})
>>> data
{'list': [{'b': '2'}, {'a': '1'}]}

After doing that, you can assemble JSON again from dictionary you modified:

>>> json.dumps(data)
'{"list": [{"b": "2"}, {"a": "1"}]}'

Does two lines count?

awk '{ sum += $1; }
     END { print sum; }' "$@"

You can then use it without the superfluous 'cat':

sum < FileWithColumnOfNumbers.txt
sum   FileWithColumnOfNumbers.txt

FWIW: on MacOS X, you can do it with a one-liner:

awk '{ sum += $1; } END { print sum; }' "$@"

It can matter if for instance you are using some sort icon font. I had this just now with:

<span class="fa fa-print fa-3x"><a href="some_link"></a></span>

Normally I would put the span inside the A but the styling wasn't taking effect until swapped it round.

In EF Core you no longer can execute "free" raw sql. You are required to define a POCO class and a DbSet for that class. In your case you will need to define Rank:

var ranks = DbContext.Ranks
   .FromSql("SQL_SCRIPT OR STORED_PROCEDURE @p0,@p1,...etc", parameters)
   .AsNoTracking().ToList();

As it will be surely readonly it will be useful to include the .AsNoTracking() call.

EDIT - Breaking change in EF Core 3.0:

DbQuery() is now obsolete, instead DbSet() should be used (again). If you have a keyless entity, i.e. it don't require primary key, you can use HasNoKey() method:

ModelBuilder.Entity<SomeModel>().HasNoKey()

More information can be found here

To write in the Visual Studio output window I used IVsOutputWindow and IVsOutputWindowPane. I included as members in my OutputWindow class which look like this :

public class OutputWindow : TextWriter
{
  #region Members

  private static readonly Guid mPaneGuid = new Guid("AB9F45E4-2001-4197-BAF5-4B165222AF29");
  private static IVsOutputWindow mOutputWindow = null;
  private static IVsOutputWindowPane mOutputPane = null;

  #endregion

  #region Constructor

  public OutputWindow(DTE2 aDte)
  {
    if( null == mOutputWindow )
    {
      IServiceProvider serviceProvider = 
      new ServiceProvider(aDte as Microsoft.VisualStudio.OLE.Interop.IServiceProvider);
      mOutputWindow = serviceProvider.GetService(typeof(SVsOutputWindow)) as IVsOutputWindow;
    }

    if (null == mOutputPane)
    {
      Guid generalPaneGuid = mPaneGuid;
      mOutputWindow.GetPane(ref generalPaneGuid, out IVsOutputWindowPane pane);

      if ( null == pane)
      {
        mOutputWindow.CreatePane(ref generalPaneGuid, "Your output window name", 0, 1);
        mOutputWindow.GetPane(ref generalPaneGuid, out pane);
      }
      mOutputPane = pane;
    }
  }

  #endregion

  #region Properties

  public override Encoding Encoding => System.Text.Encoding.Default;

  #endregion

  #region Public Methods

  public override void Write(string aMessage) => mOutputPane.OutputString($"{aMessage}\n");

  public override void Write(char aCharacter) => mOutputPane.OutputString(aCharacter.ToString());

  public void Show(DTE2 aDte)
  {
    mOutputPane.Activate();
    aDte.ExecuteCommand("View.Output", string.Empty);
  }

  public void Clear() => mOutputPane.Clear();

  #endregion
}

If you have a big text to write in output window you usually don't want to freeze the UI. In this purpose you can use a Dispatcher. To write something in output window using this implementation now you can simple do this:

Dispatcher mDispatcher = HwndSource.FromHwnd((IntPtr)mDte.MainWindow.HWnd).RootVisual.Dispatcher;

using (OutputWindow outputWindow = new OutputWindow(mDte))
{
  mDispatcher.BeginInvoke(DispatcherPriority.Normal, new Action(() =>
  {
    outputWindow.Write("Write what you want here");
  }));
}

HTML

<p>Gender</p>
<input type="radio" id="gender0" name="gender" value="Male">Male<br>
<input type="radio" id="gender1" name="gender" value="Female">Female<br>

JS

var gender = document.querySelector('input[name = "gender"]:checked').value;
document.writeln("You entered " + gender + " for your gender<br>");

The low level iterator manipulate code:

List<Money> myMoney = new List<Money>
{
    new Money{amount = 10, type = "US"},
    new Money{amount = 20, type = "US"}
};
using (var enumerator = myMoney.GetEnumerator())
{
    while (enumerator.MoveNext())
    {
        var element = enumerator.Current;
        Console.WriteLine(element.amount);
    }
}

Actually, all of those examples on the web wherein the common content/file type like "js", "css", "img", etc is been used as library name are misleading.

Real world examples

To start, let's look at how existing JSF implementations like Mojarra and MyFaces and JSF component libraries like PrimeFaces and OmniFaces use it. No one of them use resource libraries this way. They use it (under the covers, by @ResourceDependency or UIViewRoot#addComponentResource()) the following way:

<h:outputScript library="javax.faces" name="jsf.js" />
<h:outputScript library="primefaces" name="jquery/jquery.js" />
<h:outputScript library="omnifaces" name="omnifaces.js" />
<h:outputScript library="omnifaces" name="fixviewstate.js" />
<h:outputScript library="omnifaces.combined" name="[dynamicname].js" />
<h:outputStylesheet library="primefaces" name="primefaces.css" />
<h:outputStylesheet library="primefaces-aristo" name="theme.css" />
<h:outputStylesheet library="primefaces-vader" name="theme.css" />

It should become clear that it basically represents the common library/module/theme name where all of those resources commonly belong to.

Easier identifying

This way it's so much easier to specify and distinguish where those resources belong to and/or are coming from. Imagine that you happen to have a primefaces.css resource in your own webapp wherein you're overriding/finetuning some default CSS of PrimeFaces; if PrimeFaces didn't use a library name for its own primefaces.css, then the PrimeFaces own one wouldn't be loaded, but instead the webapp-supplied one, which would break the look'n'feel.

Also, when you're using a custom ResourceHandler, you can also apply more finer grained control over resources coming from a specific library when library is used the right way. If all component libraries would have used "js" for all their JS files, how would the ResourceHandler ever distinguish if it's coming from a specific component library? Examples are OmniFaces CombinedResourceHandler and GraphicResourceHandler; check the createResource() method wherein the library is checked before delegating to next resource handler in chain. This way they know when to create CombinedResource or GraphicResource for the purpose.

Noted should be that RichFaces did it wrong. It didn't use any library at all and homebrewed another resource handling layer over it and it's therefore impossible to programmatically identify RichFaces resources. That's exactly the reason why OmniFaces CombinedResourceHander had to introduce a reflection-based hack in order to get it to work anyway with RichFaces resources.

Your own webapp

Your own webapp does not necessarily need a resource library. You'd best just omit it.

<h:outputStylesheet name="css/style.css" />
<h:outputScript name="js/script.js" />
<h:graphicImage name="img/logo.png" />

Or, if you really need to have one, you can just give it a more sensible common name, like "default" or some company name.

<h:outputStylesheet library="default" name="css/style.css" />
<h:outputScript library="default" name="js/script.js" />
<h:graphicImage library="default" name="img/logo.png" />

Or, when the resources are specific to some master Facelets template, you could also give it the name of the template, so that it's easier to relate each other. In other words, it's more for self-documentary purposes. E.g. in a /WEB-INF/templates/layout.xhtml template file:

<h:outputStylesheet library="layout" name="css/style.css" />
<h:outputScript library="layout" name="js/script.js" />

And a /WEB-INF/templates/admin.xhtml template file:

<h:outputStylesheet library="admin" name="css/style.css" />
<h:outputScript library="admin" name="js/script.js" />

For a real world example, check the OmniFaces showcase source code.

Or, when you'd like to share the same resources over multiple webapps and have created a "common" project for that based on the same example as in this answer which is in turn embedded as JAR in webapp's /WEB-INF/lib, then also reference it as library (name is free to your choice; component libraries like OmniFaces and PrimeFaces also work that way):

<h:outputStylesheet library="common" name="css/style.css" />
<h:outputScript library="common" name="js/script.js" />
<h:graphicImage library="common" name="img/logo.png" />

Library versioning

Another main advantage is that you can apply resource library versioning the right way on resources provided by your own webapp (this doesn't work for resources embedded in a JAR). You can create a direct child subfolder in the library folder with a name in the \d+(_\d+)* pattern to denote the resource library version.

WebContent
 |-- resources
 |    `-- default
 |         `-- 1_0
 |              |-- css
 |              |    `-- style.css
 |              |-- img
 |              |    `-- logo.png
 |              `-- js
 |                   `-- script.js
 :

When using this markup:

<h:outputStylesheet library="default" name="css/style.css" />
<h:outputScript library="default" name="js/script.js" />
<h:graphicImage library="default" name="img/logo.png" />

This will generate the following HTML with the library version as v parameter:

<link rel="stylesheet" type="text/css" href="/contextname/javax.faces.resource/css/style.css.xhtml?ln=default&amp;v=1_0" />
<script type="text/javascript" src="/contextname/javax.faces.resource/js/script.js.xhtml?ln=default&amp;v=1_0"></script>
<img src="/contextname/javax.faces.resource/img/logo.png.xhtml?ln=default&amp;v=1_0" alt="" />

So, if you have edited/updated some resource, then all you need to do is to copy or rename the version folder into a new value. If you have multiple version folders, then the JSF ResourceHandler will automatically serve the resource from the highest version number, according to numerical ordering rules.

So, when copying/renaming resources/default/1_0/* folder into resources/default/1_1/* like follows:

WebContent
 |-- resources
 |    `-- default
 |         |-- 1_0
 |         |    :
 |         |
 |         `-- 1_1
 |              |-- css
 |              |    `-- style.css
 |              |-- img
 |              |    `-- logo.png
 |              `-- js
 |                   `-- script.js
 :

Then the last markup example would generate the following HTML:

<link rel="stylesheet" type="text/css" href="/contextname/javax.faces.resource/css/style.css.xhtml?ln=default&amp;v=1_1" />
<script type="text/javascript" src="/contextname/javax.faces.resource/js/script.js.xhtml?ln=default&amp;v=1_1"></script>
<img src="/contextname/javax.faces.resource/img/logo.png.xhtml?ln=default&amp;v=1_1" alt="" />

This will force the webbrowser to request the resource straight from the server instead of showing the one with the same name from the cache, when the URL with the changed parameter is been requested for the first time. This way the endusers aren't required to do a hard refresh (Ctrl+F5 and so on) when they need to retrieve the updated CSS/JS resource.

Please note that library versioning is not possible for resources enclosed in a JAR file. You'd need a custom ResourceHandler. See also How to use JSF versioning for resources in jar.

See also:

• JSF resource versioning
• JSF2 Static resource caching
• Structure for multiple JSF projects with shared code
• JSF 2.0 specification - Chapter 2.6 Resource Handling

In other languages you can label the loop and break from the labelled loop. Python Enhancement Proposal (PEP) 3136 suggested adding these to Python but Guido rejected it:

However, I'm rejecting it on the basis that code so complicated to require this feature is very rare. In most cases there are existing work-arounds that produce clean code, for example using 'return'. While I'm sure there are some (rare) real cases where clarity of the code would suffer from a refactoring that makes it possible to use return, this is offset by two issues:

1. The complexity added to the language, permanently. This affects not only all Python implementations, but also every source analysis tool, plus of course all documentation for the language.

2. My expectation that the feature will be abused more than it will be used right, leading to a net decrease in code clarity (measured across all Python code written henceforth). Lazy programmers are everywhere, and before you know it you have an incredible mess on your hands of unintelligible code.

So if that's what you were hoping for you're out of luck, but look at one of the other answers as there are good options there.

You have to include the jquery framework in your document head from a cdn for example:

<script src="//ajax.googleapis.com/ajax/libs/jquery/1.9.1/jquery.min.js" type="text/javascript"></script>

Then you have to include a own script for example:

(function( $ ) {

  $(document).ready(function(){
      $('input').click(function() {
          $(this).css('background-color', 'green');
      }
  });


  $(window).load(function() { 
  });

})( jQuery );

This part is a mapping of the $ to jQuery, so actually it is jQuery('selector').function();

(function( $ ) {

})( jQuery );

Here you can find die api of jquery where all functions are listed with examples and explanation: http://api.jquery.com/

Even better then @Tanjim Rahman answer you can using Spring Data JPA use the method T getOne(ID id)

Customer customerToUpdate = customerRepository.getOne(id);
customerToUpdate.setName(customerDto.getName);
customerRepository.save(customerToUpdate);

Is's better because getOne(ID id) gets you only a reference (proxy) object and does not fetch it from the DB. On this reference you can set what you want and on save() it will do just an SQL UPDATE statement like you expect it. In comparsion when you call find() like in @Tanjim Rahmans answer spring data JPA will do an SQL SELECT to physically fetch the entity from the DB, which you dont need, when you are just updating.

For IntelliJ IDEA 2017.2 I did the following to fix this issue: Go to your project structure Now go to SDKs under platform settings and click the green add button. Add your JDK path. In my case it was this path C:\Program Files\Java\jdk1.8.0_144 Now Just go Project under Project settings and select the project SDK.

after

brew install jmeter

then

open /usr/local/bin/jmeter

If you don't want to keep track of number of strings in array and want to iterate over them, just add NULL string in the end:

char *strings[]={ "one", "two", "three", NULL };

int i=0;
while(strings[i]) {
  printf("%s\n", strings[i]);
  //do something
  i++;
};

Not directly in the way you want to write that, no. One of the design tenets of Python is "Explicit is better than implicit" (see import this). This means that it's better to describe what you want rather than having the output format depend on some global formatting setting or something. You could of course format your code differently to make it look nicer:

print         '%.2f' % var1, \
      'kg =' ,'%.2f' % var2, \
      'lb =' ,'%.2f' % var3, \
      'gal =','%.2f' % var4, \
      'l'

You may have also put your console.log after an expectation that fails and is uncaught, so your log line never gets executed.

First access the children with: this.props.children, each child will then have its ref as a property on it.

a = '123' if b else '456'

Easy with recursion.

public static string GetStandardExcelColumnName(int columnNumberOneBased)
{
  int baseValue = Convert.ToInt32('A');
  int columnNumberZeroBased = columnNumberOneBased - 1;

  string ret = "";

  if (columnNumberOneBased > 26)
  {
    ret = GetStandardExcelColumnName(columnNumberZeroBased / 26) ;
  }

  return ret + Convert.ToChar(baseValue + (columnNumberZeroBased % 26) );
}

This might not work for everyone, but I updated node and it fixed the issue for me when none of the above did

I've written a Timer class based on CTT's answer. It can be used in the following way:

Timer timer = Timer();
timer.start();
/* perform task */
double duration = timer.stop();
timer.printTime(duration);

Here is its implementation:

#include <stdio.h>
#include <stdlib.h>
#include <sys/time.h>
using namespace std;

class Timer {
private:

    timeval startTime;

public:

    void start(){
        gettimeofday(&startTime, NULL);
    }

    double stop(){
        timeval endTime;
        long seconds, useconds;
        double duration;

        gettimeofday(&endTime, NULL);

        seconds  = endTime.tv_sec  - startTime.tv_sec;
        useconds = endTime.tv_usec - startTime.tv_usec;

        duration = seconds + useconds/1000000.0;

        return duration;
    }

    static void printTime(double duration){
        printf("%5.6f seconds\n", duration);
    }
};

I would say you have two options:

1. to get all parent divs styled with 100% height (including body and html)

2. to use absolute positioning for one of the parent divs (for example #content) and then all child divs set to height 100%

CREATE TABLE db1.table1 SELECT * FROM db2.table1

where db1 is the destination and db2 is the source

Bash is a Command Line Interface that was created over twenty-seven years ago by Brian Fox as a free software replacement for the Bourne Shell. A shell is a specific kind of Command Line Interface. Bash is "open source" which means that anyone can read the code and suggest changes. Since its beginning, it has been supported by a large community of engineers who have worked to make it an incredible tool. Bash is the default shell for Linux and Mac. For these reasons, Bash is the most used and widely distributed shell.

Windows has a different Command Line Interface, called Command Prompt. While this has many of the same features as Bash, Bash is much more popular. Because of the strength of the open source community and the tools they provide, mastering Bash is a better investment than mastering Command Prompt.

To use Bash on a Windows computer, we need to download and install a program called Git Bash. Git Bash (Is the Bash for windows) allows us to easily access Bash as well as another tool called Git, inside the Windows environment.

I think print() is slower than echo.

I like to use print() only for situations like:

 echo 'Doing some stuff... ';
 foo() and print("ok.\n") or print("error: " . getError() . ".\n");

When I had to solve this problem, I created a hard-coded data dictionary to map between numbers and their associated words. For example, the following might represent a few entries in the dictionary:

{1, "one"}
{2, "two"}
{30, "thirty"}

You really only need to worry about mapping numbers in the 10^0 (1,2,3, etc.) and 10^1 (10,20,30) positions because once you get to 100, you simply have to know when to use words like hundred, thousand, million, etc. in combination with your map. For example, when you have a number like 3,240,123, you get: three million two hundred forty thousand one hundred twenty three.

After you build your map, you need to work through each digit in your number and figure out the appropriate nomenclature to go with it.

try this, it works. (in the example below i have 3 cells for example.)

    func scrollViewDidEndDecelerating(scrollView: UIScrollView) {
    let visibleRect = CGRect(origin: self.collectionView.contentOffset, size: self.collectionView.bounds.size)
    let visiblePoint = CGPointMake(CGRectGetMidX(visibleRect), CGRectGetMidY(visibleRect))
    let visibleIndexPath = self.collectionView.indexPathForItemAtPoint(visiblePoint)
    if let v = visibleIndexPath {
        switch v.item {
        case 0: setImageDescription()
            break
        case 1: setImageConditions()
            break
        case 2: setImageResults()
            break
        default: break
        }
    }

I have added this answer only because the problem is explained based on more complex data pattern and I found it hard to understand here.

I created a fairly simple application. This error occurred inside Edit POST action. The action accepted ViewModel as an input parameter. The reason for using the ViewModel was to make some calculation before the record was saved.

Once the action passed through validation such as if(ModelState.IsValid), my wrongdoing was to project values from ViewModel into a completely new instance of Entity. I thought I'd have to create a new instance to store updated data and then saved such instance.

What I had realised later was that I had to read the record from database:

Student student = db.Students.Find(s => s.StudentID == ViewModel.StudentID);

and updated this object. Everything works now.

Call the recreate() method from where you want to recreate your activity . This method will destroy current instance of Activity with onDestroy() and then recreate activity with onCreate().

java.time

Since Java 1.8, you can achieve this without an extra library by using the java.time classes. See Tutorial.

DateTimeFormatter formatter = DateTimeFormatter.ofPattern("yyyy-MMM-dd");
formatter = formatter.withLocale( putAppropriateLocaleHere );  // Locale specifies human language for translating, and cultural norms for lowercase/uppercase and abbreviations and such. Example: Locale.US or Locale.CANADA_FRENCH
LocalDate date = LocalDate.parse("2005-nov-12", formatter);

The syntax is nearly the same though.

In addition to the extensions which are maintained and provided by the core PostgreSQL development team, there are extensions available from third parties. Notably, there is a site dedicated to that purpose: http://www.pgxn.org/

You have to change date class to timestamp.

String s=df.format(c.getTime());
java.util.Date parsedUtilDate = df.parse(s);  
java.sql.Timestamp timestamp = new java.sql.Timestamp(parsedUtilDate.getTime());

def train_val_test_split(X, y, train_size, val_size, test_size):
    X_train_val, X_test, y_train_val, y_test = train_test_split(X, y, test_size = test_size)
    relative_train_size = train_size / (val_size + train_size)
    X_train, X_val, y_train, y_val = train_test_split(X_train_val, y_train_val,
                                                      train_size = relative_train_size, test_size = 1-relative_train_size)
    return X_train, X_val, X_test, y_train, y_val, y_test

Here we split data 2 times with sklearn's train_test_split

sudo yum remove python-beautifulsoup

OR

sudo easy_install -m BeautifulSoup

can remove old version 3

Put the following in some global scope:

Number.prototype.getDecimals = function ( decDigCount ) {
   return this.toFixed(decDigCount);
}

and then try:

var a = 56.23232323;
a.getDecimals(2); // will return 56.23

Update

Note that toFixed() can only work for the number of decimals between 0-20 i.e. a.getDecimals(25) may generate a javascript error, so to accomodate that you may add some additional check i.e.

Number.prototype.getDecimals = function ( decDigCount ) {
   return ( decDigCount > 20 ) ? this : this.toFixed(decDigCount);
}

What levi said about passing it into the constructor is correct, but you could also use an object.

I think what Veverke is trying to say is that you could easily use the delete keyword on an object to achieve the same effect.

I think you're confused by the terminology; properties are components of the object that you can use as named indices (if you want to think of it that way).

Try something like this:

var obj = {
    "bob": "dole",
    "mr.": "peabody",
    "darkwing": "duck"
};

Then, you could just do this:

delete obj["bob"];

The structure of the object would then be this:

{
    "mr.": "peabody",
    "darkwing": "duck"
}

Which has the same effect.

I had a problem with runAllManagedModulesForAllRequests, code 0x80070021 and http error 500.19 and managed to solve it

With command prompt launched as Admnistrator, go to : C:\Windows\Microsoft.NET\Framework64\v4.0.30319>

execute

aspnet_regiis -i

bingo!

Go to apache-tomcat\conf folder add these lines in

tomcat-users.xml file

<role rolename="manager-gui"/>
<user username="admin" password="admin" roles="manager-gui"/>

and restart server

it works for me, just change: Provider=Microsoft.Jet.OLEDB.4.0 (VS2013)

OleDbConnection connection = new OleDbConnection(
"Provider=Microsoft.Jet.OLEDB.4.0;Data Source=Z:\\GENERAL\\OFMPTP_PD_SG.MDB");
DataSet DS = new DataSet();
connection.Open();

string query =
@"SELECT * from MONTHLYPROD";
OleDbDataAdapter DBAdapter = new OleDbDataAdapter();
DBAdapter.SelectCommand = new OleDbCommand(query, connection);
DBAdapter.Fill(DS);

Luis Montoya

Those who are looking for Kotlin solution can use this method,

Here I have shared full code, and also handled enabled status. Check If Application is Installed in Android Kotlin

fun isAppInstalled(packageName: String, context: Context): Boolean {
        return try {
            val packageManager = context.packageManager
            packageManager.getPackageInfo(packageName, 0)
            true
        } catch (e: PackageManager.NameNotFoundException) {
            false
        }
    }

Switch ruby version from 1.9 to 2.2 with rvm did the job for me

You're getting a linker error, so your extern is working (the compiler compiled a.c without a problem), but when it went to link the object files together at the end it couldn't resolve your extern -- void doSomething(int); wasn't actually found anywhere. Did you mess up the extern? Make sure there's actually a doSomething defined in b.c that takes an int and returns void, and make sure you remembered to include b.c in your file list (i.e. you're doing something like gcc a.c b.c, not just gcc a.c)

You can do something like this below:

//when the Add Field button is clicked
$("#add").click(function (e) {
//Append a new row of code to the "#items" div
  $("#items").append('<div><input type="text" name="input[]"><button  class="delete">Delete</button></div>');
});

For detailed tutorial http://voidtricks.com/jquery-add-remove-input-fields/

Here's how to do it, if you're using TypeScript Definition Manager!

npm install typings --global

Create typings/custom/window.d.ts:

interface Window {
  MyNamespace: any;
}

declare var window: Window;

Install your custom typing:

typings install file:typings/custom/window.d.ts --save --global

Done, use it‌! Typescript won't complain anymore:

window.MyNamespace = window.MyNamespace || {};

Take a look at CBFG and the Android port of the loading/rendering code. You should be able to drop the code into your project and use it straight away.

CBFG - http://www.codehead.co.uk/cbfg

Android loader - http://www.codehead.co.uk/cbfg/TexFont.java

In most project types, your async "up" and "down" will end at an async void event handler or returning a Task to your framework.

However, Console apps do not support this.

You can either just do a Wait on the returned task:

static void Main()
{
  MainAsync().Wait();
  // or, if you want to avoid exceptions being wrapped into AggregateException:
  //  MainAsync().GetAwaiter().GetResult();
}

static async Task MainAsync()
{
  ...
}

or you can use your own context like the one I wrote:

static void Main()
{
  AsyncContext.Run(() => MainAsync());
}

static async Task MainAsync()
{
  ...
}

More information for async Console apps is on my blog.