If you want to delete for example the last 3 commits, run the following command to remove the changes from the file system (working tree) and commit history (index) on your local branch:

git reset --hard HEAD~3

Then run the following command (on your local machine) to force the remote branch to rewrite its history:

git push --force

Congratulations! All DONE!

Some notes:

You can retrieve the desired commit id by running

git log

Then you can replace HEAD~N with <desired-commit-id> like this:

git reset --hard <desired-commit-id>

If you want to keep changes on file system and just modify index (commit history), use --soft flag like git reset --soft HEAD~3. Then you have chance to check your latest changes and keep or drop all or parts of them. In the latter case runnig git status shows the files changed since <desired-commit-id>. If you use --hard option, git status will tell you that your local branch is exactly the same as the remote one. If you don't use --hard nor --soft, the default mode is used that is --mixed. In this mode, git help reset says:

Resets the index but not the working tree (i.e., the changed files are preserved but not marked for commit) and reports what has not been updated.

Tensorflow is now supported on Python 3.6. Just make sure that the Python installation is 64 bit on a 64 bit machine and that pip is the latest (pip install --upgrade pip).

After that (pip install --upgrade tensorflow) works like a charm.

You can do this today in Java with the Red5 media server from Flash. If you want to also decode and encode video in Java, you can use the Xuggler project.

According to Dangerously Set innerHTML,

Improper use of the innerHTML can open you up to a cross-site scripting (XSS) attack. Sanitizing user input for display is notoriously error-prone, and failure to properly sanitize is one of the leading causes of web vulnerabilities on the internet.

Our design philosophy is that it should be "easy" to make things safe, and developers should explicitly state their intent when performing “unsafe” operations. The prop name dangerouslySetInnerHTML is intentionally chosen to be frightening, and the prop value (an object instead of a string) can be used to indicate sanitized data.

After fully understanding the security ramifications and properly sanitizing the data, create a new object containing only the key __html and your sanitized data as the value. Here is an example using the JSX syntax:

function createMarkup() {
    return {
       __html: 'First · Second'    };
 }; 

<div dangerouslySetInnerHTML={createMarkup()} /> 

Read more about it using below link:

documentation: React DOM Elements - dangerouslySetInnerHTML.

The linefeed character \n is not the line separator in certain operating systems (such as windows, where it's "\r\n") - my suggestion is that you use \r\n instead, then it'll both see the line-break with only \n and \r\n, I've never had any problems using it.

Also, you should look into using a StringBuilder instead of concatenating the String in the while-loop at BookCatalog.toString(), it is a lot more effective. For instance:

public String toString() {
        BookNode current = front;
        StringBuilder sb = new StringBuilder();
        while (current!=null){
            sb.append(current.getData().toString()+"\r\n ");
            current = current.getNext();
        }
        return sb.toString();
}

$http.delete method doesn't accept request body. You can try this workaround :

$http( angular.merge({}, config || {}, {
    method  : 'delete',
    url     : _url,
    data    : _data
}));

where in config you can pass config data like headers etc.

I think you'd want to look at colors.ListedColormap to generate your colormap, or if you just need a static colormap I've been working on an app that might help.

Here is an alternative to xml files to load your files as an object and access properties as an object in a very fast way.

• Attention, so that javascript can him and to interpret the content correctly it is necessary to save your files in the same format as your HTML page. If you use UTF 8 save your files in UTF8, etc.

XML works as a tree ok? instead of writing

     <property> value <property> 

write a simple file like this:

      Property1: value
      Property2: value
      etc.

Save your file .. Now call the function ....

    var objectfile = {};

function getfilecontent(url){
    var cli = new XMLHttpRequest();

    cli.onload = function(){
         if((this.status == 200 || this.status == 0) && this.responseText != null) {
        var r = this.responseText;
        var b=(r.indexOf('\n')?'\n':r.indexOf('\r')?'\r':'');
        if(b.length){
        if(b=='\n'){var j=r.toString().replace(/\r/gi,'');}else{var j=r.toString().replace(/\n/gi,'');}
        r=j.split(b);
        r=r.filter(function(val){if( val == '' || val == NaN || val == undefined || val == null ){return false;}return true;});
        r = r.map(f => f.trim());
        }
        if(r.length > 0){
            for(var i=0; i<r.length; i++){
                var m = r[i].split(':');
                if(m.length>1){
                        var mname = m[0];
                        var n = m.shift();
                        var ivalue = m.join(':');
                        objectfile[mname]=ivalue;
                }
            }
        }
        }
    }
cli.open("GET", url);
cli.send();
}

now you can get your values efficiently.

getfilecontent('mesite.com/mefile.txt');

window.onload = function(){

if(objectfile !== null){
alert (objectfile.property1.value);
}
}

It's just a small gift to contibute to the group. Thanks of your like :)

If you want to test the function on your PC locally, restart your browser with the following command (supported by all browsers except safari):

yournavigator.exe '' --allow-file-access-from-files

This is my personal approach.

class ColorType {
    static get RED () {
        return "red";
    }

    static get GREEN () {
        return "green";
    }

    static get BLUE () {
        return "blue";
    }
}

// Use case.
const color = Color.create(ColorType.RED);

This was previously asked on R-Help, so that's worth reviewing.

One suggestion there was to use readChar() and then do string manipulation on the result with strsplit() and substr(). You can see the logic involved in readChar is much less than read.table.

I don't know if memory is an issue here, but you might also want to take a look at the HadoopStreaming package. This uses Hadoop, which is a MapReduce framework designed for dealing with large data sets. For this, you would use the hsTableReader function. This is an example (but it has a learning curve to learn Hadoop):

str <- "key1\t3.9\nkey1\t8.9\nkey1\t1.2\nkey1\t3.9\nkey1\t8.9\nkey1\t1.2\nkey2\t9.9\nkey2\"
cat(str)
cols = list(key='',val=0)
con <- textConnection(str, open = "r")
hsTableReader(con,cols,chunkSize=6,FUN=print,ignoreKey=TRUE)
close(con)

The basic idea here is to break the data import into chunks. You could even go so far as to use one of the parallel frameworks (e.g. snow) and run the data import in parallel by segmenting the file, but most likely for large data sets that won't help since you will run into memory constraints, which is why map-reduce is a better approach.

Try moving that mysql.bak directory out of /var/lib/mysql to say /root/ or something. It seems like mysql is finding that and it may be causing that ERROR 1102 (42000): Incorrect database name 'mysql.bak' error.

I got this error after I accidentally published one website into the directory of another website. The two websites had different versions of .net. What fixed it for me was changing the application pool. To do that, in the IIS manager:

click the website => Advanced Settings... (on the right) => click to the right of Application Pool => a button with "..." should appear => select ".NET v4.5 Classic"

If that application pool doesn't work, try some of the others.

You should try to add asteriks (*) to the end.

gradle test --tests "com.a.b.c.*"

Try to use this , it works perfectly for me

  // 

   varb = new List<object>();

 // Example 

   varb.Add(new[] { float.Parse(GridView1.Rows[1].Cells[2].Text )});

 // JSON  + Serializ

public string Json()
        {  
            return (new JavaScriptSerializer()).Serialize(varb);
        }


//  Jquery SIDE 

  var datasets = {
            "Products": {
                label: "Products",
                data: <%= getJson() %> 
            }

First of all, there can be two reasons for this:

1. You have created your own VPC and forgot to enable Public DNS.

To solve this :

i) Go to AWS VPC console and select the VPC you have created.

ii) Then click on Actions and then enable DNS Resolution.

            OR

2. You have not enabled public ip-assign option in EC2 configuration.

Here you cannot change the setting; so create an ami image and then recreate the instance from that.

To restate what I think the OP's question really is:

If I'm building an application principally in Angular 1.x, and (implicitly) doing so in the era of Grunt/Gulp/Broccoli and Bower/NPM, and I maybe have a couple additional library dependencies, does Require add clear, specific value beyond what I get by using Angular without Require?

Or, put another way:

"Does vanilla Angular need Require to manage basic Angular component-loading effectively, if I have other ways of handling basic script-loading?"

And I believe the basic answer to that is: "not unless you've got something else going on, and/or you're unable to use newer, more modern tools."

Let's be clear at the outset: RequireJS is a great tool that solved some very important problems, and started us down the road that we're on, toward more scalable, more professional Javascript applications. Importantly, it was the first time many people encountered the concept of modularization and of getting things out of global scope. So, if you're going to build a Javascript application that needs to scale, then Require and the AMD pattern are not bad tools for doing that.

But, is there anything particular about Angular that makes Require/AMD a particularly good fit? No. In fact, Angular provides you with its own modularization and encapsulation pattern, which in many ways renders redundant the basic modularization features of AMD. And, integrating Angular modules into the AMD pattern is not impossible, but it's a bit... finicky. You'll definitely be spending time getting the two patterns to integrate nicely.

For some perspective from the Angular team itself, there's this, from Brian Ford, author of the Angular Batarang and now a member of the Angular core team:

I don't recommend using RequireJS with AngularJS. Although it's certainly possible, I haven't seen any instance where RequireJS was beneficial in practice.

So, on the very specific question of AngularJS: Angular and Require/AMD are orthogonal, and in places overlapping. You can use them together, but there's no reason specifically related to the nature/patterns of Angular itself.

But what about basic management of internal and external dependencies for scalable Javascript applications? Doesn't Require do something really critical for me there?

I recommend checking out Bower and NPM, and particularly NPM. I'm not trying to start a holy war about the comparative benefits of these tools. I merely want to say: there are other ways to skin that cat, and those ways may be even better than AMD/Require. (They certainly have much more popular momentum in late-2015, particularly NPM, combined with ES6 or CommonJS modules. See related SO question.)

What about lazy-loading?

Note that lazy-loading and lazy-downloading are different. Angular's lazy-loading doesn't mean you're pulling them direct from the server. In a Yeoman-style application with javascript automation, you're concatenating and minifying the whole shebang together into a single file. They're present, but not executed/instantiated until needed. The speed and bandwidth improvements you get from doing this vastly, vastly outweigh any alleged improvements from lazy-downloading a particular 20-line controller. In fact, the wasted network latency and transmission overhead for that controller is going to be an order of magnitude greater than the size of the controller itself.

But let's say you really do need lazy-downloading, perhaps for infrequently-used pieces of your application, such as an admin interface. That's a very legitimate case. Require can indeed do that for you. But there are also many other, potentially more flexible options that accomplish the same thing. And Angular 2.0 will apparently take care of this for us, built-in to the router. (Details.)

But what about during development on my local dev boxen?

How can I get all my dozens/hundreds of script files loaded without needing to attach them all to index.html manually?

Have a look at the sub-generators in Yeoman's generator-angular, or at the automation patterns embodied in generator-gulp-angular, or at the standard Webpack automation for React. These provide you a clean, scalable way to either: automatically attach the files at the time that components are scaffolded, or to simply grab them all automatically if they are present in certain folders/match certain glob-patterns. You never again need to think about your own script-loading once you've got the latter options.

Bottom-line?

Require is a great tool, for certain things. But go with the grain whenever possible, and separate your concerns whenever possible. Let Angular worry about Angular's own modularization pattern, and consider using ES6 modules or CommonJS as a general modularization pattern. Let modern automation tools worry about script-loading and dependency-management. And take care of async lazy-loading in a granular way, rather than by tangling it up with the other two concerns.

That said, if you're developing Angular apps but can't install Node on your machine to use Javascript automation tools for some reason, then Require may be a good alternate solution. And I've seen really elaborate setups where people want to dynamically load Angular components that each declare their own dependencies or something. And while I'd probably try to solve that problem another way, I can see the merits of the idea, for that very particular situation.

But otherwise... when starting from scratch with a new Angular application and flexibility to create a modern automation environment... you've got a lot of other, more flexible, more modern options.

(Updated repeatedly to keep up with the evolving JS scene.)

As provided in chosen explanation, git reset is good. But nowadays we often use sub-modules: repositories inside repositories. For example, you if you use ZF3 and jQuery in your project you most probably want them to be cloned from their original repositories. In such case git reset is not enough. We need to update submodules to that exact version that are defined in our repository:

git checkout master
git fetch origin master
git reset --hard origin/master
git pull

git submodule foreach git submodule update

git status

it is the same as you will come (cd) recursively to the working directory of each sub-module and will run:

git submodule update

And it's very different from

git checkout master
git pull

because sub-modules point not to branch but to the commit.

In that cases when you manually checkout some branch for 1 or more submodules you can run

git submodule foreach git pull

You need to specify what are the class invariants, i.e. properties which will always be true for an instance of the class (for example, the title of a book will never be null, or the size of a dog will always be > 0).

These invariants should be established during construction, and be preserved along the lifetime of the object, which means that methods shall not break the invariants. The constructors can set these invariants either by having compulsory arguments, or by setting default values:

class Book {
    private String title; // not nullable
    private String isbn;  // nullable

    // Here we provide a default value, but we could also skip the 
    // parameterless constructor entirely, to force users of the class to
    // provide a title
    public Book()
    {
        this("Untitled"); 
    }

    public Book(String title) throws IllegalArgumentException
    {
        if (title == null) 
            throw new IllegalArgumentException("Book title can't be null");
        this.title = title;
        // leave isbn without value
    }
    // Constructor with title and isbn
}

However, the choice of these invariants highly depends on the class you're writing, how you'll use it, etc., so there's no definitive answer to your question.

With fetch, we need to deal with two promises. With axios, we can directly access the JSON result inside the response object data property.

If you are reading unicode escaped chars from a file, then you will have a tough time doing that because the string will be read literally along with an escape for the back slash:

my_file.txt

Blah blah...
Column delimiter=;
Word delimiter=\u0020 #This is just unicode for whitespace

.. more stuff

Here, when you read line 3 from the file the string/line will have:

"Word delimiter=\u0020 #This is just unicode for whitespace"

and the char[] in the string will show:

{...., '=', '\\', 'u', '0', '0', '2', '0', ' ', '#', 't', 'h', ...}

Commons StringUnescape will not unescape this for you (I tried unescapeXml()). You'll have to do it manually as described here.

So, the sub-string "\u0020" should become 1 single char '\u0020'

But if you are using this "\u0020" to do String.split("... ..... ..", columnDelimiterReadFromFile) which is really using regex internally, it will work directly because the string read from file was escaped and is perfect to use in the regex pattern!! (Confused?)

Update Android emulator alone from SDK tool

In Swift 4:

Swift 4

override func viewDidLoad() {
    super.viewDidLoad()

    self.title = "Your title"
}

I hope it helps, regards!

From the site i found out the following things:

SQL SERVER – @@IDENTITY vs SCOPE_IDENTITY() vs IDENT_CURRENT – Retrieve Last Inserted Identity of Record March 25, 2007 by pinaldave

SELECT @@IDENTITY It returns the last IDENTITY value produced on a connection, regardless of the table that produced the value, and regardless of the scope of the statement that produced the value. @@IDENTITY will return the last identity value entered into a table in your current session. While @@IDENTITY is limited to the current session, it is not limited to the current scope. If you have a trigger on a table that causes an identity to be created in another table, you will get the identity that was created last, even if it was the trigger that created it.

SELECT SCOPE_IDENTITY() It returns the last IDENTITY value produced on a connection and by a statement in the same scope, regardless of the table that produced the value. SCOPE_IDENTITY(), like @@IDENTITY, will return the last identity value created in the current session, but it will also limit it to your current scope as well. In other words, it will return the last identity value that you explicitly created, rather than any identity that was created by a trigger or a user defined function.

SELECT IDENT_CURRENT(‘tablename’) It returns the last IDENTITY value produced in a table, regardless of the connection that created the value, and regardless of the scope of the statement that produced the value. IDENT_CURRENT is not limited by scope and session; it is limited to a specified table. IDENT_CURRENT returns the identity value generated for a specific table in any session and any scope.

IRB has a setting for this awful "feature", which you can customize.

Create a file called ~/.irbrc that includes the following line:

IRB.conf[:BACK_TRACE_LIMIT] = 100

This will allow you to see 100 stack frames in irb, at least. I haven't been able to find an equivalent setting for the non-interactive runtime.

Detailed information about IRB customization can be found in the Pickaxe book.

Here is some code I wrote to help us identify and correct untrusted CONSTRAINTs in a DATABASE. It generates the code to fix each issue.

    ;WITH Untrusted (ConstraintType, ConstraintName, ConstraintTable, ParentTable, IsDisabled, IsNotForReplication, IsNotTrusted, RowIndex) AS
(
    SELECT 
        'Untrusted FOREIGN KEY' AS FKType
        , fk.name AS FKName
        , OBJECT_NAME( fk.parent_object_id) AS FKTableName
        , OBJECT_NAME( fk.referenced_object_id) AS PKTableName 
        , fk.is_disabled
        , fk.is_not_for_replication
        , fk.is_not_trusted
        , ROW_NUMBER() OVER (ORDER BY OBJECT_NAME( fk.parent_object_id), OBJECT_NAME( fk.referenced_object_id), fk.name) AS RowIndex
    FROM 
        sys.foreign_keys fk 
    WHERE 
        is_ms_shipped = 0 
        AND fk.is_not_trusted = 1       

    UNION ALL

    SELECT 
        'Untrusted CHECK' AS KType
        , cc.name AS CKName
        , OBJECT_NAME( cc.parent_object_id) AS CKTableName
        , NULL AS ParentTable
        , cc.is_disabled
        , cc.is_not_for_replication
        , cc.is_not_trusted
        , ROW_NUMBER() OVER (ORDER BY OBJECT_NAME( cc.parent_object_id), cc.name) AS RowIndex
    FROM 
        sys.check_constraints cc 
    WHERE 
        cc.is_ms_shipped = 0
        AND cc.is_not_trusted = 1

)
SELECT 
    u.ConstraintType
    , u.ConstraintName
    , u.ConstraintTable
    , u.ParentTable
    , u.IsDisabled
    , u.IsNotForReplication
    , u.IsNotTrusted
    , u.RowIndex
    , 'RAISERROR( ''Now CHECKing {%i of %i)--> %s ON TABLE %s'', 0, 1' 
        + ', ' + CAST( u.RowIndex AS VARCHAR(64))
        + ', ' + CAST( x.CommandCount AS VARCHAR(64))
        + ', ' + '''' + QUOTENAME( u.ConstraintName) + '''' 
        + ', ' + '''' + QUOTENAME( u.ConstraintTable) + '''' 
        + ') WITH NOWAIT;'
    + 'ALTER TABLE ' + QUOTENAME( u.ConstraintTable) + ' WITH CHECK CHECK CONSTRAINT ' + QUOTENAME( u.ConstraintName) + ';' AS FIX_SQL
FROM Untrusted u
CROSS APPLY (SELECT COUNT(*) AS CommandCount FROM Untrusted WHERE ConstraintType = u.ConstraintType) x
ORDER BY ConstraintType, ConstraintTable, ParentTable;

The Host property will return the domain name you used when accessing the site. So, in your development environment, since you're requesting

http://localhost:950/m/pages/Searchresults.aspx?search=knife&filter=kitchen

It's returning localhost. You can break apart your URL like so:

Protocol: http
Host: localhost
Port: 950
PathAndQuery: /m/pages/SearchResults.aspx?search=knight&filter=kitchen

I've searched far and wide for a solution to this problem for a long time. Ideally we want to have the child greater than the parent, but without knowing the constraints of the parent in advance.

And I finally found a brilliant generic answer here. Copying it verbatim:

The idea here is: push the container to the exact middle of the browser window with left: 50%;, then pull it back to the left edge with negative -50vw margin.

.child-div {
  width: 100vw;
  position: relative;
  left: 50%;
  right: 50%;
  margin-left: -50vw;
  margin-right: -50vw;
}

Usually you would need it in Program.cs where you want to decide to run either Debug on Non-Debug code and that too mostly in Windows Services. So I created a readonly field IsDebugMode and set its value in static constructor as shown below.

static class Program
{

    #region Private variable
    static readonly bool IsDebugMode = false;
    #endregion Private variable

    #region Constrcutors
    static Program()
    {
 #if DEBUG
        IsDebugMode = true;
 #endif
    }
    #endregion

    #region Main

    /// <summary>
    /// The main entry point for the application.
    /// </summary>
    static void Main(string[] args)
    {

        if (IsDebugMode)
        {
            MyService myService = new MyService(args);
            myService.OnDebug();             
        }
        else
        {
            ServiceBase[] services = new ServiceBase[] { new MyService (args) };
            services.Run(args);
        }
    }

    #endregion Main        
}

use the include is the easiest way as per

http://www.vistax64.com/powershell/168315-get-childitem-filter-files-multiple-extensions.html

Yes, set the cell as a RANGE object one time and then use that RANGE object in your code:

Sub RangeExample()
Dim MyRNG As Range

Set MyRNG = Sheets("Sheet1").Cells(23, 4)

Debug.Print MyRNG.Value

End Sub

Alternately you can simply store the value of that cell in memory and reference the actual value, if that's all you really need. That variable can be Long or Double or Single if numeric, or String:

Sub ValueExample()
Dim MyVal As String

MyVal = Sheets("Sheet1").Cells(23, 4).Value

Debug.Print MyVal

End Sub

Format String Syntax.

https://docs.python.org/3/library/string.html#formatstrings

from math import pi
var1, var2, var3, var4 = pi, pi*2, pi*3, pi*4
'{:0.2f}, kg={:0.2f}, lb={:0.2f}, gal={:0.2f}'.format(var1, var2, var3, var4)

The output would be:

'3.14, kg=6.28, lb=9.42, gal=12.57'

I came up with a mix of defining a class like David's answer, but not requiring a Where class to go with it. It looks something like:

var resultsGroupings = resultsRecords.GroupBy(r => new { r.IdObj1, r.IdObj2, r.IdObj3})
                                    .Select(r => new ResultGrouping {
                                        IdObj1= r.Key.IdObj1,
                                        IdObj2= r.Key.IdObj2,
                                        IdObj3= r.Key.IdObj3,
                                        Results = r.ToArray(),
                                        Count = r.Count()
                                    });



private class ResultGrouping
        {
            public short IdObj1{ get; set; }
            public short IdObj2{ get; set; }
            public int IdObj3{ get; set; }

            public ResultCsvImport[] Results { get; set; }
            public int Count { get; set; }
        }

Where resultRecords is my initial list I'm grouping, and its a List<ResultCsvImport>. Note that the idea here to is that, I'm grouping by 3 columns, IdObj1 and IdObj2 and IdObj3

1) Your existing web.config: you have declared rewrite map .. but have not created any rules that will use it. RewriteMap on its' own does absolutely nothing.

2) Below is how you can do it (it does not utilise rewrite maps -- rules only, which is fine for small amount of rewrites/redirects):

This rule will do SINGLE EXACT rewrite (internal redirect) /page to /page.html. URL in browser will remain unchanged.

<system.webServer>
    <rewrite>
        <rules>
            <rule name="SpecificRewrite" stopProcessing="true">
                <match url="^page$" />
                <action type="Rewrite" url="/page.html" />
            </rule>
        </rules>
    </rewrite>
</system.webServer>

This rule #2 will do the same as above, but will do 301 redirect (Permanent Redirect) where URL will change in browser.

<system.webServer>
    <rewrite>
        <rules>
            <rule name="SpecificRedirect" stopProcessing="true">
                <match url="^page$" />
                <action type="Redirect" url="/page.html" />
            </rule>
        </rules>
    </rewrite>
</system.webServer>

Rule #3 will attempt to execute such rewrite for ANY URL if there are such file with .html extension (i.e. for /page it will check if /page.html exists, and if it does then rewrite occurs):

<system.webServer>
    <rewrite>
        <rules>
            <rule name="DynamicRewrite" stopProcessing="true">
                <match url="(.*)" />
                <conditions>
                    <add input="{REQUEST_FILENAME}\.html" matchType="IsFile" />
                </conditions>
                <action type="Rewrite" url="/{R:1}.html" />
            </rule>
        </rules>
    </rewrite>
</system.webServer>

for me it is daterangepicker worked by this :

     $('#host1field').daterangepicker({
                   locale: {
                            format: 'DD/MM/YYYY'
                            }
                 });

Use List<T>.Insert

While not relevant to your specific example, if performance is important also consider using LinkedList<T> because inserting an item to the start of a List<T> requires all items to be moved over. See When should I use a List vs a LinkedList.

If all you are doing is replacing the existing data, then you can do this

std::vector<int> data; // evil global :)

void CopyData(int *newData, size_t count)
{
   data.assign(newData, newData + count);
}

Try using this:-

mkdir -p dir;

NOTE:- This will also create any intermediate directories that don't exist; for instance,

Check out mkdir -p

or try this:-

if [[ ! -e $dir ]]; then
    mkdir $dir
elif [[ ! -d $dir ]]; then
    echo "$Message" 1>&2
fi

The cleanest, most efficient and paradigm-friendly solution in this case is to use a System.Windows.Forms.BindingSource as a proxy between your list of items (datasource) and your DataGridView:

var itemStates = new List<ItemState>();
var bindingSource1 = new System.Windows.Forms.BindingSource { DataSource = itemStates };
dataGridView1.DataSource = bindingSource1;

Then, when adding items, use Add() method of BindingSource instead of your list's Add() method:

for (var i = 0; i < 10; i++)
{
    bindingSource1.Add(new ItemState { Id = i.ToString() });
    System.Threading.Thread.Sleep(500);
}

This way you adding items to your list and notifying DataGridView about those additions with the same line of code. No need to reset DataGridView's DataSource every time you make a change to the list.

It also worth mentioning that you can drop a BindingSource onto your form directly in Visual Studio's Forms Designer and attach it as a data source to your DataGridView there as well, which saves you a line of code in the above example where I'm doing it manually.

[What you have is just an object, not a "json-object". JSON is a textual notation. What you've quoted is JavaScript code using an array initializer and an object initializer (aka, "object literal syntax").]

If you can rely on having ECMAScript5 features available, you can use the Object.keys function to get an array of the keys (property names) in an object. All modern browsers have Object.keys (including IE9+).

Object.keys(jsonData).forEach(function(key) {
    var value = jsonData[key];
    // ...
});

The rest of this answer was written in 2011. In today's world, A) You don't need to polyfill this unless you need to support IE8 or earlier (!), and B) If you did, you wouldn't do it with a one-off you wrote yourself or grabbed from an SO answer (and probably shouldn't have in 2011, either). You'd use a curated polyfill, possibly from es5-shim or via a transpiler like Babel that can be configured to include polyfills (which may come from es5-shim).

Here's the rest of the answer from 2011:

Note that older browsers won't have it. If not, this is one of the ones you can supply yourself:

if (typeof Object.keys !== "function") {
    (function() {
        var hasOwn = Object.prototype.hasOwnProperty;
        Object.keys = Object_keys;
        function Object_keys(obj) {
            var keys = [], name;
            for (name in obj) {
                if (hasOwn.call(obj, name)) {
                    keys.push(name);
                }
            }
            return keys;
        }
    })();
}

That uses a for..in loop (more info here) to loop through all of the property names the object has, and uses Object.prototype.hasOwnProperty to check that the property is owned directly by the object rather than being inherited.

(I could have done it without the self-executing function, but I prefer my functions to have names, and to be compatible with IE you can't use named function expressions [well, not without great care]. So the self-executing function is there to avoid having the function declaration create a global symbol.)

# prevent mime based attacks
Header set X-Content-Type-Options "nosniff"

This header prevents "mime" based attacks. This header prevents Internet Explorer from MIME-sniffing a response away from the declared content-type as the header instructs the browser not to override the response content type. With the nosniff option, if the server says the content is text/html, the browser will render it as text/html.

http://stopmalvertising.com/security/securing-your-website-with-.htaccess/.htaccess-http-headers.html

Your syntax is fine, it will return rows where LastAdDate lies within the last 6 months;

select cast('01-jan-1970' as datetime) as LastAdDate into #PubAdvTransData 
    union select GETDATE()
    union select NULL
    union select '01-feb-2010'

DECLARE @sp_Date DATETIME = DateAdd(m, -6, GETDATE())

SELECT * FROM #PubAdvTransData pat
     WHERE (pat.LastAdDate > @sp_Date)

>2010-02-01 00:00:00.000
>2010-04-29 21:12:29.920

Are you sure LastAdDate is of type DATETIME?

int() only works for strings that look like integers; it will fail for strings that look like floats. Use float() instead.

Suppose you have following lines of code

MyUrl = "www.google.com" #Your url goes here
urllib.urlretrieve(MyUrl)

If you are receiving following error message

AttributeError: module 'urllib' has no attribute 'urlretrieve'

Then you should try following code to fix the issue:

import urllib.request
MyUrl = "www.google.com" #Your url goes here
urllib.request.urlretrieve(MyUrl)

Since the question asks for an available data structure, a tree can be constructed from lists or arrays:

Object[] tree = new Object[2];
tree[0] = "Hello";
{
  Object[] subtree = new Object[2];
  subtree[0] = "Goodbye";
  subtree[1] = "";
  tree[1] = subtree;
}

instanceof can be used to determine whether an element is a subtree or a terminal node.

Difference between Mutable and Immutable objects

Definitions

Mutable object: Object that can be changed after creating it.
Immutable object: Object that cannot be changed after creating it.

In python if you change the value of the immutable object it will create a new object.

Mutable Objects

Here are the objects in Python that are of mutable type:

1. list
2. Dictionary
3. Set
4. bytearray
5. user defined classes

Immutable Objects

Here are the objects in Python that are of immutable type:

1. int
2. float
3. decimal
4. complex
5. bool
6. string
7. tuple
8. range
9. frozenset
10. bytes

Some Unanswered Questions

Questions: Is string an immutable type?
Answer: yes it is, but can you explain this: Proof 1:

a = "Hello"
a +=" World"
print a

Output

"Hello World"

In the above example the string got once created as "Hello" then changed to "Hello World". This implies that the string is of the mutable type. But it is not when we check its identity to see whether it is of a mutable type or not.

a = "Hello"
identity_a = id(a)
a += " World"
new_identity_a = id(a)
if identity_a != new_identity_a:
    print "String is Immutable"

Output

String is Immutable

Proof 2:

a = "Hello World"
a[0] = "M"

Output

TypeError 'str' object does not support item assignment

Questions: Is Tuple an immutable type?
Answer: yes, it is. Proof 1:

tuple_a = (1,)
tuple_a[0] = (2,)
print a

Output

'tuple' object does not support item assignment

Your sklearn version is too low, model_selection is imported by 0.18.1, so please update the sklearn version.

I found a nice one liner here >> http://www.pixelchef.net/remove-empty-lines-file-powershell. Just tested it out with several blanks lines including newlines only as well as lines with just spaces, just tabs, and combinations.

(gc file.txt) | ? {$_.trim() -ne "" } | set-content file.txt

See the original for some notes about the code. Nice :)

The following works for me:

class Fruits: pass

banana = Fruits()

banana.color = 'yellow'
banana.value = 30

import pickle

filehandler = open("Fruits.obj","wb")
pickle.dump(banana,filehandler)
filehandler.close()

file = open("Fruits.obj",'rb')
object_file = pickle.load(file)
file.close()

print(object_file.color, object_file.value, sep=', ')
# yellow, 30

I don't know why you are dividing by 100 but here my assumption int a;

int b = (int) Math.ceil( ((double)a) / 100);

or

int b = (int) Math.ceil( a / 100.0);

I know replaceAll method is much easier but I wanted to post this as well.

public static String removeExtraSpace(String input) {
    input= input.trim();
    ArrayList <String> x= new ArrayList<>(Arrays.asList(input.split("")));
    for(int i=0; i<x.size()-1;i++) {
        if(x.get(i).equals(" ") && x.get(i+1).equals(" ")) { 
            x.remove(i); 
            i--; 
        }
    }
    String word="";
    for(String each: x) 
        word+=each;
    return word;
}

AFAIK the files in the assets directory don't get unpacked. Instead, they are read directly from the APK (ZIP) file.

So, you really can't make stuff that expects a file accept an asset 'file'.

Instead, you'll have to extract the asset and write it to a seperate file, like Dumitru suggests:

  File f = new File(getCacheDir()+"/m1.map");
  if (!f.exists()) try {

    InputStream is = getAssets().open("m1.map");
    int size = is.available();
    byte[] buffer = new byte[size];
    is.read(buffer);
    is.close();


    FileOutputStream fos = new FileOutputStream(f);
    fos.write(buffer);
    fos.close();
  } catch (Exception e) { throw new RuntimeException(e); }

  mapView.setMapFile(f.getPath());

If you are saving this information in a database, its wrong to escape HTML using a client-side script, this should be done in the server. Otherwise its easy to bypass your XSS protection.

To make my point clear, here is a exemple using one of the answers:

Lets say you are using the function escapeHtml to escape the Html from a comment in your blog and then posting it to your server.

var entityMap = {
    "&": "&",
    "<": "&lt;",
    ">": "&gt;",
    '"': '&quot;',
    "'": '&#39;',
    "/": '&#x2F;'
  };

  function escapeHtml(string) {
    return String(string).replace(/[&<>"'\/]/g, function (s) {
      return entityMap[s];
    });
  }

The user could:

• Edit the POST request parameters and replace the comment with javascript code.
• Overwrite the escapeHtml function using the browser console.

If the user paste this snippet in the console it would bypass the XSS validation:

function escapeHtml(string){
   return string
}

Load url helper in controller

$this->load->helper('url');

Use content:

#Library {
    height: 70px;
    width: 120px;
}

#Library:hover {
    content: url('http://www.furrytalk.com/wp-content/uploads/2010/05/2.jpg');
    height: 70px;
    width: 120px;
}

JSFiddle

For me none of the above answers worked so I am adding what worked for me. I first installed the files mentioned in the accepted answer and when that not worked, I downloaded files from this link and it started working.

So I think 2012 distribution is also needed (I am using window7 home basic 64 FYI).

Modern browsers implement something known as back-forward cache (BFCache). When you hit back/forward button the actual page is not reloaded (and the scripts are never re-run).

If you have to do something in case of user hitting back/forward keys - listen for BFCache pageshow and pagehide events:

window.addEventListener("pageshow", () => {
  // update hidden input field
});

See more details for Gecko and WebKit implementations.

(optional) Install git for windows (https://git-scm.com/) to get git bash. Git bash is much more similar to Linux terminal than Windows cmd.

Install Anaconda 3

https://www.anaconda.com/download/

It should set itself into Windows PATH. Restart your PC. Then pip should work in your cmd

Then in cmd (or git bash), run command

pip install openpyxl

You can cast it to a list, insert the item, then cast it back to a tuple.

a = ('Product', '500.00', '1200.00')
a = list(a)
a.insert(3, 'foobar')
a = tuple(a)
print a

>> ('Product', '500.00', '1200.00', 'foobar')

Different people who come to this question mean different things by a popup box. I highly recommend reading the Temporary Views documentation. My answer is largely a summary of this and other related documentation.

Alert (show me an example)

Alerts display a title and an optional message. The user must acknowledge it (a one-button alert) or make a simple choice (a two-button alert) before going on. You create an alert with a UIAlertController.

It is worth quoting the documentation's warning and advice about creating unnecessary alerts.

Notes:

• See also Alert Views, but starting in iOS 8 UIAlertView was deprecated. You should use UIAlertController to create alerts now.
• iOS Fundamentals: UIAlertView and UIAlertController (tutorial)

Action Sheet (show me an example)

Action Sheets give the user a list of choices. They appear either at the bottom of the screen or in a popover depending on the size and orientation of the device. As with alerts, a UIAlertController is used to make an action sheet. Before iOS 8, UIActionSheet was used, but now the documentation says:

Important: UIActionSheet is deprecated in iOS 8. (Note that UIActionSheetDelegate is also deprecated.) To create and manage action sheets in iOS 8 and later, instead use UIAlertController with a preferredStyle of UIAlertControllerStyleActionSheet.

Modal View (show me an example)

A modal view is a self-contained view that has everything it needs to complete a task. It may or may not take up the full screen. To create a modal view, use a UIPresentationController with one of the Modal Presentation Styles.

See also

• Presenting View Controllers from Other View Controllers
• Modal Contexts

Popover (show me an example)

A Popover is a view that appears when a user taps on something and disappears when tapping off it. It has an arrow showing the control or location from where the tap was made. The content can be just about anything you can put in a View Controller. You make a popover with a UIPopoverPresentationController. (Before iOS 8, UIPopoverController was the recommended method.)

In the past popovers were only available on the iPad, but starting with iOS 8 you can also get them on an iPhone (see here, here, and here).

See also

• View Controllers: Popovers

Notifications

Notifications are sounds/vibrations, alerts/banners, or badges that notify the user of something even when the app is not running in the foreground.

See also

• Local and Remote Notification Programming Guide
• Simple, interactive notifications in iOS 8

A note about Android Toasts

In Android, a Toast is a short message that displays on the screen for a short amount of time and then disappears automatically without disrupting user interaction with the app.

People coming from an Android background want to know what the iOS version of a Toast is. Some examples of these questions can he found here, here, here, and here. The answer is that there is no equivalent to a Toast in iOS. Various workarounds that have been presented include:

• Make your own with a subclassed UIView
• Import a third party project that mimics a Toast
• Use a buttonless Alert with a timer

However, my advice is to stick with the standard UI options that already come with iOS. Don't try to make your app look and behave exactly the same as the Android version. Think about how to repackage it so that it looks and feels like an iOS app.

getActivity().onBackPressed does the all you need. It automatically calls the onBackPressed method in parent activity.

When installing SQL Express, you'll usually get a named instance called SQLExpress, which as others have said you can connect to with localhost\SQLExpress.

If you're looking to get a 'default' instance, which doesn't have a name, you can do that as well. If you put MSSQLServer as the name when installing, it will create a default instance which you can connect to by just specifying 'localhost'.

See here for details... MSDN Instance Configuration

You can set this at boot by adding the "elevator" parameter to the kernel cmdline (such as in grub.cfg)

Example:

elevator=deadline

This will make "deadline" the default I/O scheduler for all block devices.

If you'd like to query or change the scheduler after the system has booted, or would like to use a different scheduler for a specific block device, I recommend installing and use the tool ioschedset to make this easy.

https://github.com/kata198/ioschedset

If you're on Archlinux it's available in aur:

https://aur.archlinux.org/packages/ioschedset

Some example usage:

# Get i/o scheduler for all block devices
[username@hostname ~]$ io-get-sched
sda:    bfq
sr0:    bfq

# Query available I/O schedulers
[username@hostname ~]$ io-set-sched --list
mq-deadline kyber bfq none

# Set sda to use "kyber"
[username@hostname ~]$ io-set-sched kyber /dev/sda
Must be root to set IO Scheduler. Rerunning under sudo...

[sudo] password for username:
+ Successfully set sda to 'kyber'!

# Get i/o scheduler for all block devices to assert change
[username@hostname ~]$ io-get-sched
sda:    kyber
sr0:    bfq

# Set all block devices to use 'deadline' i/o scheduler
[username@hostname ~]$ io-set-sched deadline
Must be root to set IO Scheduler. Rerunning under sudo...

+ Successfully set sda to 'deadline'!
+ Successfully set sr0 to 'deadline'!

# Get the current block scheduler just for sda
[username@hostname ~]$ io-get-sched sda
sda:    mq-deadline

Usage should be self-explanatory. The tools are standalone and only require bash.

Hope this helps!

EDIT: Disclaimer, these are scripts I wrote.

Working solution for Windows:

Control Panel > User Accounts > Credential Manager > Generic Credentials

One-liners, though shunned by the creators, have their place.

This one solves the lazy evaluation problem by letting you, optionally, pass functions to be evaluated if necessary:

func FullTernary(e bool, a, b interface{}) interface{} {
    if e {
        if reflect.TypeOf(a).Kind() == reflect.Func {
            return a.(func() interface{})()
        }
        return a
    }
    if reflect.TypeOf(b).Kind() == reflect.Func {
        return b.(func() interface{})()
    }
    return b
}

func demo() {
    a := "hello"
    b := func() interface{} { return a + " world" }
    c := func() interface{} { return func() string { return "bye" } }
    fmt.Println(FullTernary(true, a, b).(string)) // cast shown, but not required
    fmt.Println(FullTernary(false, a, b))
    fmt.Println(FullTernary(true, b, a))
    fmt.Println(FullTernary(false, b, a))
    fmt.Println(FullTernary(true, c, nil).(func() string)())
}

Output

hello
hello world
hello world
hello
bye

• Functions passed in must return an interface{} to satisfy the internal cast operation.
• Depending on the context, you might choose to cast the output to a specific type.
• If you wanted to return a function from this, you would need to wrap it as shown with c.

The standalone solution here is also nice, but could be less clear for some uses.

use Illuminate\Database\Eloquent\Builder;

$query = Customers::with('orders');
$query = $query->whereHas('orders', function (Builder $query) use ($request) {
     $query = $query->where('orders.customer_id', 'NULL') 
});
    $query = $query->get();

You can set the image to be background image and have a transparent foreground image.

Using org.json library:

try {
     JSONObject jsonObject = new JSONObject("{\"phonetype\":\"N95\",\"cat\":\"WP\"}");
}catch (JSONException err){
     Log.d("Error", err.toString());
}

I tried "ManiIOT"'s solution and it worked surprisingly. I've added another role (Compute Admin Role) for my google user account from IAM admin. Then stopped and restarted the VM. Afterwards 'sudo passwd' let me to generate a new password for the user.

So here are steps.

1. Go to IAM & Admin
2. Select IAM
3. Find your user name service account (basically your google account) and click Edit-member
4. Add another role --> select 'Compute Engine' - 'Compute Admin'
5. Restart your Compute VM
6. open SSH shell and run the command 'sudo passwd'
7. enter a brand new password. Voilà!

Another useful property of the cross product is that its magnitude is related to the sine of the angle between the two vectors:

| a x b | = |a| . |b| . sine(theta)

or

sine(theta) = | a x b | / (|a| . |b|)

So, in implementation 1 above, if a and b are known in advance to be unit vectors then the result of that function is exactly that sine() value.

psql --pset=format=FORMAT

Great for executing queries from command line, e.g.

psql --pset=format=unaligned -c "select bandanavalue from bandana where bandanakey = 'atlassian.confluence.settings';"

#!/bin/bash

aline="$(head -n 1 file.txt)"
set -- $aline
colNum=$#

#set -x
while read line; do
  set -- $line
  for i in $(seq $colNum); do
    eval col$i="\"\$col$i \$$i\""
  done
done < file.txt

for i in $(seq $colNum); do
  eval echo \${col$i}
done

another version with set eval

Here is a complete example showing how to use the ** operator to pass values from a dictionary as keyword arguments.

>>> def f(x=2):
...     print(x)
... 
>>> new_x = {'x': 4}
>>> f()        #    default value x=2
2
>>> f(x=3)     #   explicit value x=3
3
>>> f(**new_x) # dictionary value x=4 
4

The following worked for me:

html { height: 100vh; }

body {
  top: 0;
  left: 0;
  right: 0;
  bottom: 0;
  width: 100vw;
}

/* this is the container you want to take the visible viewport  */
/* make sure this is top-level in body */
#your-app-container {
  height: 100%;
}

The body will take the visible viewport height and #your-app-container with height: 100% will make that container take the visible viewport height.

You can't do this: {this.state.arrayFromJson} As your error suggests what you are trying to do is not valid. You are trying to render the whole array as a React child. This is not valid. You should iterate through the array and render each element. I use .map to do that.

I am pasting a link from where you can learn how to render elements from an array with React.

http://jasonjl.me/blog/2015/04/18/rendering-list-of-elements-in-react-with-jsx/

Hope it helps!

The EFCore examples on MSDN show that you can do some quite complex things with Include and ThenInclude.

This is a good example of how complex you can get (this is all one chained statement!):

viewModel.Instructors = await _context.Instructors

      .Include(i => i.OfficeAssignment)

      .Include(i => i.CourseAssignments)
        .ThenInclude(i => i.Course)
            .ThenInclude(i => i.Enrollments)
                .ThenInclude(i => i.Student)

      .Include(i => i.CourseAssignments)
        .ThenInclude(i => i.Course)
            .ThenInclude(i => i.Department)

      .AsNoTracking()
      .OrderBy(i => i.LastName)
      .ToListAsync();

You can have multiple Include calls - even after ThenInclude and it kind of 'resets' you back to the level of the top level entity (Instructors).

You can even repeat the same 'first level' collection (CourseAssignments) multiple times followed by separate ThenIncludes commands to get to different child entities.

Note your actual query must be tagged onto the end of the Include or ThenIncludes chain. The following does NOT work:

var query = _context.Instructors.AsQueryable();
query.Include(i => i.OfficeAssignment);

var first10Instructors = query.Take(10).ToArray();

Would strongly recommend you set up logging and make sure your queries aren't out of control if you're including more than one or two things. It's important to see how it actually works - and you'll notice each separate 'include' is typically a new query to avoid massive joins returning redundant data.

AsNoTracking can greatly speed things up if you're not intending on actually editing the entities and resaving.

EFCore 5 made some changes to the way queries for multiple sets of entities are sent to the server. There are new options for Split Queries which can make certain queries of this type far more efficient with fewer joins, but make sure to understand the limitations.

UPDATE table_name 
  SET column_name=CASE 
WHEN column_name in ('value1', 'value2',.....) 
  THEN 'update_value' 
WHEN column_name in ('value1', 'value2',.....) 
  THEN 'update_value' 
END

table_name = The name of table on which you want to perform operation.

column_name = The name of Column/Field of which value you want to set.

update_value = The value you want to set of column_name

On windows if you have a 5 button mouse, you can use forward and back in lieu of ALT+Left and ALT+Right.

You can link the globally installed gulp locally with

npm link gulp

The problem with using the PasswordBox is that it is not very MVVM friendly due to the fact that it works with SecureString and therefore requires a shim to bind it to a String. You also cannot use the clipboard. While all these things are there for a reason, you may not require that level of security. Here is an alternative approach that works with the clipboard, nothing fancy. You make the TextBox text and background transparent and bind the text to a TextBlock underneath it. This textblock converts characters to * using the converter specified.

<Window.Resources>
    <local:TextToPasswordCharConverter x:Key="TextToPasswordCharConverter" />
</Window.Resources>

<Grid Width="200">
    <TextBlock Margin="5,0,0,0" Text="{Binding Text, Converter={StaticResource TextToPasswordCharConverter}, UpdateSourceTrigger=PropertyChanged, Mode=OneWay}" FontFamily="Consolas" VerticalAlignment="Center" />
    <TextBox Foreground="Transparent" Text="{Binding Text, UpdateSourceTrigger=PropertyChanged}" FontFamily="Consolas" Background="Transparent" />
</Grid>

And here is the Value Converter:

class TextToPasswordCharConverter : IValueConverter
{
    public object Convert(object value, Type targetType, object parameter, CultureInfo culture)
    {
        return new String('*', value?.ToString().Length ?? 0);
    }

    public object ConvertBack(object value, Type targetType, object parameter, CultureInfo culture)
    {
        throw new NotImplementedException();
    }
}

Make sure your Text property on your viewmodel implements INotifyPropertyChanged

simple run in shell : sudo apt-get install --reinstall libexpat1
got same problem with libxcb - solved in this way - very fast :)

It is not possible with the default Link List web part, but there are resources describing how to extend Sharepoint server-side to add this functionality.

Share Point Links Open in New Window
Changing Link Lists in Sharepoint 2007

Remove the first / in the path. Also you don't need type="text/javascript" anymore in HTML5.

Comment to Skelly's really helpful workaround: in Bootstrap-sass 3.3.6, utilities.scss, line 19: .pull-left has float:left !important. Since that, I recommend to use !important in his CSS as well:

.dropdown-submenu.pull-left {
    float:none !important;
}

This one worked, double quotes when $user and $password are outside single quotes. Single quotes when inside a single quote statement.

mysql --user="$user" --password="$password" --database="$user" --execute='DROP DATABASE '$user'; CREATE DATABASE '$user';'

const and readonly are similar, but they are not exactly the same.

A const field is a compile-time constant, meaning that that value can be computed at compile-time. A readonly field enables additional scenarios in which some code must be run during construction of the type. After construction, a readonly field cannot be changed.

For instance, const members can be used to define members like:

struct Test
{
    public const double Pi = 3.14;
    public const int Zero = 0;
}

Since values like 3.14 and 0 are compile-time constants. However, consider the case where you define a type and want to provide some pre-fab instances of it. E.g., you might want to define a Color class and provide "constants" for common colors like Black, White, etc. It isn't possible to do this with const members, as the right hand sides are not compile-time constants. One could do this with regular static members:

public class Color
{
    public static Color Black = new Color(0, 0, 0);
    public static Color White = new Color(255, 255, 255);
    public static Color Red   = new Color(255, 0, 0);
    public static Color Green = new Color(0, 255, 0);
    public static Color Blue  = new Color(0, 0, 255);
    private byte red, green, blue;

    public Color(byte r, byte g, byte b) => (red, green, blue) = (r, g, b);
}

But then there is nothing to keep a client of Color from mucking with it, perhaps by swapping the Black and White values. Needless to say, this would cause consternation for other clients of the Color class. The "readonly" feature addresses this scenario.

By simply introducing the readonly keyword in the declarations, we preserve the flexible initialization while preventing client code from mucking around.

public class Color
{
    public static readonly Color Black = new Color(0, 0, 0);
    public static readonly Color White = new Color(255, 255, 255);
    public static readonly Color Red   = new Color(255, 0, 0);
    public static readonly Color Green = new Color(0, 255, 0);
    public static readonly Color Blue  = new Color(0, 0, 255);
    private byte red, green, blue;

    public Color(byte r, byte g, byte b) => (red, green, blue) = (r, g, b);
}

It is interesting to note that const members are always static, whereas a readonly member can be either static or not, just like a regular field.

It is possible to use a single keyword for these two purposes, but this leads to either versioning problems or performance problems. Assume for a moment that we used a single keyword for this (const) and a developer wrote:

public class A
{
    public static const C = 0;
}

and a different developer wrote code that relied on A:

public class B
{
    static void Main() => Console.WriteLine(A.C);
}

Now, can the code that is generated rely on the fact that A.C is a compile-time constant? I.e., can the use of A.C simply be replaced by the value 0? If you say "yes" to this, then that means that the developer of A cannot change the way that A.C is initialized -- this ties the hands of the developer of A without permission.

If you say "no" to this question then an important optimization is missed. Perhaps the author of A is positive that A.C will always be zero. The use of both const and readonly allows the developer of A to specify the intent. This makes for better versioning behavior and also better performance.

Developed this method:

You NEED a table that has an unique value that can be ordered.

If you want rows 10,000 to 25,000 and your Table has 40,000 rows, first you need to get the starting point and total rows:

int start = 40000 - 10000;

int total = 25000 - 10000;

And then pass these by code to the query:

SELECT * FROM 
(SELECT * FROM schema.mytable 
ORDER BY userId DESC fetch first {start} rows only ) AS mini 
ORDER BY mini.userId ASC fetch first {total} rows only

Based on the comments above, here is a simple test:

isunset() { [[ "${!1}" != 'x' ]] && [[ "${!1-x}" == 'x' ]] && echo 1; }
isset()   { [ -z "$(isunset "$1")" ] && echo 1; }

Example:

$ unset foo; [[ $(isunset foo) ]] && echo "It's unset" || echo "It's set"
It's unset
$ foo=     ; [[ $(isunset foo) ]] && echo "It's unset" || echo "It's set"
It's set
$ foo=bar  ; [[ $(isunset foo) ]] && echo "It's unset" || echo "It's set"
It's set

As of currently (September 2014) I would recommend using NSInteger/CGFloat when interacting with iOS API's etc if you are also building your app for arm64. This is because you will likely get unexpected results when you use the float, long and int types.

EXAMPLE: FLOAT/DOUBLE vs CGFLOAT

As an example we take the UITableView delegate method tableView:heightForRowAtIndexPath:.

In a 32-bit only application it will work fine if it is written like this:

-(float)tableView:(UITableView *)tableView heightForRowAtIndexPath:(NSIndexPath *)indexPath
{
    return 44;
}

float is a 32-bit value and the 44 you are returning is a 32-bit value. However, if we compile/run this same piece of code in a 64-bit arm64 architecture the 44 will be a 64-bit value. Returning a 64-bit value when a 32-bit value is expected will give an unexpected row height.

You can solve this issue by using the CGFloat type

-(CGFloat)tableView:(UITableView *)tableView heightForRowAtIndexPath:(NSIndexPath *)indexPath
{
    return 44;
}

This type represents a 32-bit float in a 32-bit environment and a 64-bit double in a 64-bit environment. Therefore when using this type the method will always receive the expected type regardless of compile/runtime environment.

The same is true for methods that expect integers. Such methods will expect a 32-bit int value in a 32-bit environment and a 64-bit long in a 64-bit environment. You can solve this case by using the type NSInteger which serves as an int or a long based on the compile/runtime environemnt.

You can do that using the gacutil tool. In its simplest form:

gacutil /i yourdll.dll

You find the Visual Studio Command Prompt in the start menu under Programs -> Visual Studio -> Visual Studio Tools.

Without a nicer solution, what I found to work is simply building my query string in the bean return:

public String submit() {
    // Do something
    return "/page2.xhtml?faces-redirect=true&id=" + id;
}

Not the most flexible of solutions, but seems to work how I want it to.

Also using this approach to clean up the process of building the query string: http://www.warski.org/blog/?p=185

a.hover:hover

document.oncontextmenu = function() {return false;}; //disable the browser context menu
$('selector-name')[0].oncontextmenu = function(){} //set jquery element context menu 

Shell calls to reverse (as mentioned above) are very good to debug these problems, but there are two critical conditions:

• you must supply arguments that matches whatever arguments the view needs,
• these arguments must match regexp patterns.

Yes, it's logical. Yes, it's also confusing because reverse will only throw the exception and won't give you any further hints.

An example of URL pattern:

url(r'^cookies/(?P<hostname>[^/]+)/(?P<url_id>\d+)/$', 'register_site.views.show_cookies', name='show_cookies'),

And then what happens in shell:

>>> from register_site.views import show_cookies
>>> reverse(show_cookies)
NoReverseMatch: Reverse for 'register_site.views.show_cookies' with arguments '()' and keyword arguments '{}' not found.

It doesn't work because I supplied no arguments.

>>> reverse('show_cookies', kwargs={'url_id':123,'hostname': 'aaa'})
'/cookies/aaa/123'

Now it worked, but...

>>> reverse('show_cookies', kwargs={'url_id':'x','hostname': 'www.dupa.com'})
NoReverseMatch: Reverse for 'show_cookies' with arguments '()' and keyword arguments '{'url_id': 'x', 'hostname': 'www.dupa.com'}' not found.

Now it didn't work because url_id didn't match the regexp (expected numeric, supplied string).

You can use reverse with both positional arguments and keyword arguments. The syntax is:

reverse(viewname, urlconf=None, args=None, kwargs=None, prefix=None, current_app=None)

As it comes to the url template tag, there's funny thing about it. Django documentation gives example of using quoted view name:

{% url 'news.views.year_archive' yearvar %}

So I used it in a similar way in my HTML template:

{% url 'show_cookies' hostname=u.hostname url_id=u.pk %}

But this didn't work for me. But the exception message gave me a hint of what could be wrong - note the double single quotes around view name:

Reverse for ''show_cookies'' with arguments...

It started to work when I removed the quotes:

{% url show_cookies hostname=u.hostname url_id=u.pk %}

And this is confusing.

For anything with requests to URLs you might want to check out requests. For JSON in particular:

>>> import requests
>>> r = requests.get('https://github.com/timeline.json')
>>> r.json()
[{u'repository': {u'open_issues': 0, u'url': 'https://github.com/...

This is a better code that will help you through.
With your database, but rather, I have used mysql not mysqli
Enjoy it.

<body>

<form action="" method="post">

  <input name="search" type="search" autofocus><input type="submit" name="button">

</form>

<table>
  <tr><td><b>First Name</td><td></td><td><b>Last Name</td></tr>

<?php

$con=mysql_connect('localhost', 'root', '');
$db=mysql_select_db('employee');


if(isset($_POST['button'])){    //trigger button click

  $search=$_POST['search'];

  $query=mysql_query("select * from employees where first_name like '%{$search}%' || last_name like '%{$search}%' ");

if (mysql_num_rows($query) > 0) {
  while ($row = mysql_fetch_array($query)) {
    echo "<tr><td>".$row['first_name']."</td><td></td><td>".$row['last_name']."</td></tr>";
  }
}else{
    echo "No employee Found<br><br>";
  }

}else{                          //while not in use of search  returns all the values
  $query=mysql_query("select * from employees");

  while ($row = mysql_fetch_array($query)) {
    echo "<tr><td>".$row['first_name']."</td><td></td><td>".$row['last_name']."</td></tr>";
  }
}

mysql_close();
?>

I recently had the requirement to use JNDI with an embedded Tomcat in Spring Boot.
Actual answers give some interesting hints to solve my task but it was not enough as probably not updated for Spring Boot 2.

Here is my contribution tested with Spring Boot 2.0.3.RELEASE.

Specifying a datasource available in the classpath at runtime

You have multiple choices :

• using the DBCP 2 datasource (you don't want to use DBCP 1 that is outdated and less efficient).
• using the Tomcat JDBC datasource.
• using any other datasource : for example HikariCP.

If you don't specify anyone of them, with the default configuration the instantiation of the datasource will throw an exception :

Caused by: javax.naming.NamingException: Could not create resource factory instance
        at org.apache.naming.factory.ResourceFactory.getDefaultFactory(ResourceFactory.java:50)
        at org.apache.naming.factory.FactoryBase.getObjectInstance(FactoryBase.java:90)
        at javax.naming.spi.NamingManager.getObjectInstance(NamingManager.java:321)
        at org.apache.naming.NamingContext.lookup(NamingContext.java:839)
        at org.apache.naming.NamingContext.lookup(NamingContext.java:159)
        at org.apache.naming.NamingContext.lookup(NamingContext.java:827)
        at org.apache.naming.NamingContext.lookup(NamingContext.java:159)
        at org.apache.naming.NamingContext.lookup(NamingContext.java:827)
        at org.apache.naming.NamingContext.lookup(NamingContext.java:159)
        at org.apache.naming.NamingContext.lookup(NamingContext.java:827)
        at org.apache.naming.NamingContext.lookup(NamingContext.java:173)
        at org.apache.naming.SelectorContext.lookup(SelectorContext.java:163)
        at javax.naming.InitialContext.lookup(InitialContext.java:417)
        at org.springframework.jndi.JndiTemplate.lambda$lookup$0(JndiTemplate.java:156)
        at org.springframework.jndi.JndiTemplate.execute(JndiTemplate.java:91)
        at org.springframework.jndi.JndiTemplate.lookup(JndiTemplate.java:156)
        at org.springframework.jndi.JndiTemplate.lookup(JndiTemplate.java:178)
        at org.springframework.jndi.JndiLocatorSupport.lookup(JndiLocatorSupport.java:96)
        at org.springframework.jndi.JndiObjectLocator.lookup(JndiObjectLocator.java:114)
        at org.springframework.jndi.JndiObjectTargetSource.getTarget(JndiObjectTargetSource.java:140)
        ... 39 common frames omitted
Caused by: java.lang.ClassNotFoundException: org.apache.tomcat.dbcp.dbcp2.BasicDataSourceFactory
        at java.net.URLClassLoader.findClass(URLClassLoader.java:381)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:424)
        at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:331)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:357)
        at java.lang.Class.forName0(Native Method)
        at java.lang.Class.forName(Class.java:264)
        at org.apache.naming.factory.ResourceFactory.getDefaultFactory(ResourceFactory.java:47)
        ... 58 common frames omitted

• To use Apache JDBC datasource, you don't need to add any dependency but you have to change the default factory class to org.apache.tomcat.jdbc.pool.DataSourceFactory.
  You can do it in the resource declaration : resource.setProperty("factory", "org.apache.tomcat.jdbc.pool.DataSourceFactory"); I will explain below where add this line.

• To use DBCP 2 datasource a dependency is required:

  <dependency> <groupId>org.apache.tomcat</groupId> <artifactId>tomcat-dbcp</artifactId> <version>8.5.4</version> </dependency>

Of course, adapt the artifact version according to your Spring Boot Tomcat embedded version.

• To use HikariCP, add the required dependency if not already present in your configuration (it may be if you rely on persistence starters of Spring Boot) such as :

  <dependency> <groupId>com.zaxxer</groupId> <artifactId>HikariCP</artifactId> <version>3.1.0</version> </dependency>

and specify the factory that goes with in the resource declaration:

resource.setProperty("factory", "com.zaxxer.hikari.HikariJNDIFactory");

Datasource configuration/declaration

You have to customize the bean that creates the TomcatServletWebServerFactory instance.
Two things to do :

• enabling the JNDI naming which is disabled by default

• creating and add the JNDI resource(s) in the server context

For example with PostgreSQL and a DBCP 2 datasource, do that :

@Bean
public TomcatServletWebServerFactory tomcatFactory() {
    return new TomcatServletWebServerFactory() {
        @Override
        protected TomcatWebServer getTomcatWebServer(org.apache.catalina.startup.Tomcat tomcat) {
            tomcat.enableNaming(); 
            return super.getTomcatWebServer(tomcat);
        }

        @Override 
        protected void postProcessContext(Context context) {

            // context
            ContextResource resource = new ContextResource();
            resource.setName("jdbc/myJndiResource");
            resource.setType(DataSource.class.getName());
            resource.setProperty("driverClassName", "org.postgresql.Driver");

            resource.setProperty("url", "jdbc:postgresql://hostname:port/dbname");
            resource.setProperty("username", "username");
            resource.setProperty("password", "password");
            context.getNamingResources()
                   .addResource(resource);          
        }
    };
}

Here the variants for Tomcat JDBC and HikariCP datasource.

In postProcessContext() set the factory property as explained early for Tomcat JDBC ds :

    @Override 
    protected void postProcessContext(Context context) {
        ContextResource resource = new ContextResource();       
        //...
        resource.setProperty("factory", "org.apache.tomcat.jdbc.pool.DataSourceFactory");
        //...
        context.getNamingResources()
               .addResource(resource);          
    }
};

and for HikariCP :

    @Override 
    protected void postProcessContext(Context context) {
        ContextResource resource = new ContextResource();       
        //...
        resource.setProperty("factory", "com.zaxxer.hikari.HikariDataSource");
        //...
        context.getNamingResources()
               .addResource(resource);          
    }
};

Using/Injecting the datasource

You should now be able to lookup the JNDI ressource anywhere by using a standard InitialContext instance :

InitialContext initialContext = new InitialContext();
DataSource datasource = (DataSource) initialContext.lookup("java:comp/env/jdbc/myJndiResource");

You can also use JndiObjectFactoryBean of Spring to lookup up the resource :

JndiObjectFactoryBean bean = new JndiObjectFactoryBean();
bean.setJndiName("java:comp/env/jdbc/myJndiResource");
bean.afterPropertiesSet();
DataSource object = (DataSource) bean.getObject();

To take advantage of the DI container you can also make the DataSource a Spring bean :

@Bean(destroyMethod = "")
public DataSource jndiDataSource() throws IllegalArgumentException, NamingException {
    JndiObjectFactoryBean bean = new JndiObjectFactoryBean();
    bean.setJndiName("java:comp/env/jdbc/myJndiResource");
    bean.afterPropertiesSet();
    return (DataSource) bean.getObject();
}

And so you can now inject the DataSource in any Spring beans such as :

@Autowired
private DataSource jndiDataSource;

Note that many examples on the internet seem to disable the lookup of the JNDI resource on startup :

bean.setJndiName("java:comp/env/jdbc/myJndiResource");
bean.setProxyInterface(DataSource.class);
bean.setLookupOnStartup(false);
bean.afterPropertiesSet(); 

But I think that it is helpless as it invokes just after afterPropertiesSet() that does the lookup !

I think something like this would give you the current CultureInfo:

CultureInfo currentCulture = Thread.CurrentThread.CurrentCulture;

Is that what you're looking for?

$mylabel.text( $mylabel.text().replace('-', '') );

Since text() gets the value, and text( "someValue" ) sets the value, you just place one inside the other.

Would be the equivalent of doing:

var newValue = $mylabel.text().replace('-', '');
$mylabel.text( newValue );

EDIT:

I hope I understood the question correctly. I'm assuming $mylabel is referencing a DOM element in a jQuery object, and the string is in the content of the element.

If the string is in some other variable not part of the DOM, then you would likely want to call the .replace() function against that variable before you insert it into the DOM.

Like this:

var someVariable = "-123456";
$mylabel.text( someVariable.replace('-', '') );

or a more verbose version:

var someVariable = "-123456";
someVariable = someVariable.replace('-', '');
$mylabel.text( someVariable );

Though alluded to in other comments I thought I'd spell it out a bit for those using the "Controller As" syntax:

<div ng-controller="MyController as ctrl">

<form name="ctrl.myForm">
    ...inputs
    Dirty? {{ctrl.myForm.$dirty}}

    <button ng-click="ctrl.saveChanges()">Save</button>
</form>

</div>

Then you can access the FormController in your code like:

function MyController () {
    var vm = this;
    vm.saveChanges = saveChanges;

    function saveChanges() {

       if(vm.myForm.$valid) { 
            // Save to db or whatever.
            vm.myForm.$setPristine();
       }
}

Try like this.

<div style="overflow-y: scroll; height:400px;">

Static data members declarations in the class declaration are not definition of them. To define them you should do this in the .CPP file to avoid duplicated symbols.

The only data you can declare and define is integral static constants. (Values of enums can be used as constant values as well)

You might want to rewrite your code as:

class test {
public:
  const static unsigned char X = 1;
  const static unsigned char Y = 2;
  ...
  test();
};

test::test() {
}

If you want to have ability to modify you static variables (in other words when it is inappropriate to declare them as const), you can separate you code between .H and .CPP in the following way:

.H :

class test {
public:

  static unsigned char X;
  static unsigned char Y;

  ...

  test();
};

.CPP :

unsigned char test::X = 1;
unsigned char test::Y = 2;

test::test()
{
  // constructor is empty.
  // We don't initialize static data member here, 
  // because static data initialization will happen on every constructor call.
}

I would like to add my cents to the top answer in that if the language supports something like generator, bfs can be done co-recursively.

To begin with, @Tanzelax's answer reads:

Breadth-first traversal traditionally uses a queue, not a stack. The nature of a queue and a stack are pretty much opposite, so trying to use the call stack (which is a stack, hence the name) as the auxiliary storage (a queue) is pretty much doomed to failure

Indeed, ordinary function call's stack won't behave like a normal stack. But generator function will suspend the execution of function so it gives us the chance to yield next level of nodes' children without delving into deeper descendants of the node.

The following code is recursive bfs in Python.

def bfs(root):
  yield root
  for n in bfs(root):
    for c in n.children:
      yield c

The intuition here is:

1. bfs first will return the root as first result
2. suppose we already have the bfs sequence, the next level of elements in bfs is the immediate children of previous node in the sequence
3. repeat the above two procedures

If your table columns contains duplicate data and If you directly apply row_ number() and create PARTITION on column, there is chance to have result in duplicated row and with row number value.

To remove duplicate row, you need one more INNER query in from clause which eliminates duplicate rows and then it will give output to it's foremost outer FROM clause where you can apply PARTITION and ROW_NUMBER ().

As like below example:

SELECT DATE, STATUS, TITLE, ROW_NUMBER() OVER (PARTITION BY DATE, STATUS, TITLE ORDER BY QUANTITY ASC) AS Row_Num
FROM (
     SELECT DISTINCT <column names>...
) AS tbl

You can try like this. It works for me

$("#MISSION_ID").select2();

On hide/show or ajax request, we have to reinitialize the select2 plugin

For example:

$("#offialNumberArea").show();
$("#eventNameArea").hide();

$('.selectCriteria').change(function(){
    var thisVal = $(this).val();
    if(thisVal == 'sailor'){
        $("#offialNumberArea").show();
        $("#eventNameArea").hide();
    }
    else
    {
        $("#offialNumberArea").hide();
        $("#eventNameArea").show();
        $("#MISSION_ID").select2();
    }
});

For what it's worth.

```{r eval=FALSE}

The document will display the code by default but will prevent the code block from being executed, and thus will also not display any results.

I found 2 reason for this issue:

1. Sometimes its because of multiple included libraries. For example you add

   compile 'com.nineoldandroids:library:2.4.0'

in your gradle and add another library that it also use "nineoldandroids" in it's gradle!

1. As Android Developer Official website said:

If you have built an Android app and received this error, then congratulations, you have a lot of code!

So, why?

The Dalvik Executable specification limits the total number of methods that can be referenced within a single DEX file to 65,536, including Android framework methods, library methods, and methods in your own code. Getting past this limit requires that you configure your app build process to generate more than one DEX file, known as a multidex configuration.

Then what should you do?

• Avoiding the 65K Limit - How?

  1. Review your app's direct and transitive dependencies - Ensure any large library dependency you include in your app is used in a manner that outweighs the amount of code being added to the application. A common anti-pattern is to include a very large library because a few utility methods were useful. Reducing your app code dependencies can often help you avoid the dex reference limit.
  2. Remove unused code with ProGuard - Configure the ProGuard settings for your app to run ProGuard and ensure you have shrinking enabled for release builds. Enabling shrinking ensures you are not shipping unused code with your APKs.
• Configuring Your App for Multidex with Gradle - How? 1.Change your Gradle build configuration to enable multidex.

put

multiDexEnabled true

in the defaultConfig, buildType, or productFlavor sections of your Gradle build file.

2.In your manifest add the MultiDexApplication class from the multidex support library to the application element.

<?xml version="1.0" encoding="utf-8"?>
<manifest xmlns:android="http://schemas.android.com/apk/res/android"
    package="com.example.android.multidex.myapplication">
<application
    ...
    android:name="android.support.multidex.MultiDexApplication">
    ...
</application>
</manifest>

Note: If your app uses extends the Application class, you can override the attachBaseContext() method and call MultiDex.install(this) to enable multidex. For more information, see the MultiDexApplication reference documentation.

Also this code may help you:

dexOptions {
    javaMaxHeapSize "4g"
}

Put in your gradle(android{ ... } ).

You can use the ternary operator easily:

{{ $usersType ? $usersType : '' }}

This is what's killing you:

task.Wait();

That's blocking the UI thread until the task has completed - but the task is an async method which is going to try to get back to the UI thread after it "pauses" and awaits an async result. It can't do that, because you're blocking the UI thread...

There's nothing in your code which really looks like it needs to be on the UI thread anyway, but assuming you really do want it there, you should use:

private async void Button_Click(object sender, RoutedEventArgs 
{
    Task<List<MyObject>> task = GetResponse<MyObject>("my url");
    var items = await task;
    // Presumably use items here
}

Or just:

private async void Button_Click(object sender, RoutedEventArgs 
{
    var items = await GetResponse<MyObject>("my url");
    // Presumably use items here
}

Now instead of blocking until the task has completed, the Button_Click method will return after scheduling a continuation to fire when the task has completed. (That's how async/await works, basically.)

Note that I would also rename GetResponse to GetResponseAsync for clarity.

I'm not convinced its a good idea to return image data in a REST service. It ties up your application server's memory and IO bandwidth. Much better to delegate that task to a proper web server that is optimized for this kind of transfer. You can accomplish this by sending a redirect to the image resource (as a HTTP 302 response with the URI of the image). This assumes of course that your images are arranged as web content.

Having said that, if you decide you really need to transfer image data from a web service you can do so with the following (pseudo) code:

@Path("/whatever")
@Produces("image/png")
public Response getFullImage(...) {

    BufferedImage image = ...;

    ByteArrayOutputStream baos = new ByteArrayOutputStream();
    ImageIO.write(image, "png", baos);
    byte[] imageData = baos.toByteArray();

    // uncomment line below to send non-streamed
    // return Response.ok(imageData).build();

    // uncomment line below to send streamed
    // return Response.ok(new ByteArrayInputStream(imageData)).build();
}

Add in exception handling, etc etc.

To allow from all:

#Require ip 127.0.0.1
#Require ip ::1
Require all granted

The simplest possible solution I found was:

In your markup:

<a [href]="location.path()">Reload</a>

and in your component typescript file:

constructor(
        private location: Location
  ) { }

Provide the following in the search dialog:

Find What: ^$\r\n
Replace With: (Leave it empty)

Click Replace All

$('form :input').change(function() {
    // Something has changed
});

Probably the best way is via the built-in struct module:

>>> import struct
>>> x = 1245427
>>> struct.pack('>BH', x >> 16, x & 0xFFFF)
'\x13\x00\xf3'
>>> struct.pack('>L', x)[1:]  # could do it this way too
'\x13\x00\xf3'

Alternatively -- and I wouldn't usually recommend this, because it's mistake-prone -- you can do it "manually" by shifting and the chr() function:

>>> x = 1245427
>>> chr((x >> 16) & 0xFF) + chr((x >> 8) & 0xFF) + chr(x & 0xFF)
'\x13\x00\xf3'

Out of curiosity, why do you only want three bytes? Usually you'd pack such an integer into a full 32 bits (a C unsigned long), and use struct.pack('>L', 1245427) but skip the [1:] step?

This is a shortcut for $(document).ready(), which is executed when the browser has finished loading the page (meaning here, "when the DOM is available"). See http://www.learningjquery.com/2006/09/introducing-document-ready. If you are trying to call example() before the browser has finished loading the page, it may not work.

You have to do two steps:

1. Put all your files (css,js,html code, etc.) into the public folder.
2. Use url({{ URL::asset('images/slides/2.jpg') }}) where images/slides/2.jpg is path of your content.

Similarly you can call js, css etc.

It is neccesary to provide Group Id and Artifact Id to download the jar file you need. If you want to search it just use * , * for these fields.

Here is what fixed the problem for me. I did not have to convert to Excel. Just modified the DataType when choosing the data source to "text stream" (Figure 1). You can also check the "Edit Mappings" dialog to verify the change to the size (Figure 2).

Figure 1

Figure 2

public static string GetCurrentWebsiteRoot()
{
    return HttpContext.Current.Request.Url.GetLeftPart(UriPartial.Authority);
}

Even adding responseType, I dealt with it for days with no success. Finally I got it. Make sure that in your backend script you don't define header as -("Content-Type: application/json);

Becuase if you turn it to text but backend asks for json, it will return an error...

For iOS 8.0,the answer is out of date.I found the media resource in the following path: ~/Library/Developer/CoreSimulator/Devices/[DeviceID]/data/Media/DCIM/100APPLE

imho there are two cases for branches that were forgot to close

Case 1: branch was not merged into default

in this case I update to the branch and do another commit with --close-branch, unfortunatly this elects the branch to become the new tip and hence before pushing it to other clones I make sure that the real tip receives some more changes and others don't get confused about that strange tip.

hg up myBranch
hg commit --close-branch

Case 2: branch was merged into default

This case is not that much different from case 1 and it can be solved by reproducing the steps for case 1 and two additional ones.

in this case I update to the branch changeset, do another commit with --close-branch and merge the new changeset that became the tip into default. the last operation creates a new tip that is in the default branch - HOORAY!

hg up myBranch
hg commit --close-branch
hg up default
hg merge myBranch

Hope this helps future readers.

Since GDB 7.5 you can use these native Convenience Functions:

$_memeq(buf1, buf2, length)
$_regex(str, regex)
$_streq(str1, str2)
$_strlen(str)

Seems quite less problematic than having to execute a "foreign" strcmp() on the process' stack each time the breakpoint is hit. This is especially true for debugging multithreaded processes.

Note your GDB needs to be compiled with Python support, which is not an issue with current linux distros. To be sure, you can check it by running show configuration inside GDB and searching for --with-python. This little oneliner does the trick, too:

$ gdb -n -quiet -batch -ex 'show configuration' | grep 'with-python'
             --with-python=/usr (relocatable)

For your demo case, the usage would be

break <where> if $_streq(x, "hello")

or, if your breakpoint already exists and you just want to add the condition to it

condition <breakpoint number> $_streq(x, "hello")

$_streq only matches the whole string, so if you want something more cunning you should use $_regex, which supports the Python regular expression syntax.

You don't specify which shell (there are many), so I am assuming Bourne Shell, that is I think your script starts with:

#!/bin/sh

Please remember to tag future questions with the shell type, as this will help the community answer your question.

You need to define your functions before you call them. Using ():

process_install()
{
    echo "Performing process_install() commands, using arguments [${*}]..."
}

process_exit()
{
    echo "Performing process_exit() commands, using arguments [${*}]..."
}

Then you can call your functions, just as if you were calling any command:

if [ "$choice" = "true" ]
then
    process_install foo bar
elif [ "$choice" = "false" ]
then
    process_exit baz qux

You may also wish to check for invalid choices at this juncture...

else
    echo "Invalid choice [${choice}]..."
fi

See it run with three different values of ${choice}.

Good luck!

You can use

Source.fromFile(fileName).getLines().mkString

however it should be noticed that getLines() removes all new line characters. If you want save formatting you should use

Source.fromFile(fileName).iter.mkString

With these two steps we can check if it LL(1) or not. Both of them have to be satisfied.

1.If we have the production:A->a1|a2|a3|a4|.....|an. Then,First(a(i)) intersection First(a(j)) must be phi(empty set)[a(i)-a subscript i.]

2.For every non terminal 'A',if First(A) contains epsilon Then First(A) intersection Follow(A) must be phi(empty set).

Supported by SQL Server 2005 and later versions

SELECT CONVERT(VARCHAR(10), GETDATE(), 101) 
       + ' ' + CONVERT(VARCHAR(8), GETDATE(), 108)

* See Microsoft's documentation to understand what the 101 and 108 style codes above mean.

Supported by SQL Server 2012 and later versions

SELECT FORMAT(GETDATE() , 'MM/dd/yyyy HH:mm:ss')

Result

Both of the above methods will return:

10/16/2013 17:00:20

Some of the other answers did not work for me: It was not possible to create the checkpoint while the db was online, because the transaction log was full (how ironic). However, after setting the database to emergency mode, I was able to shrink the log file:

alter database <database_name> set emergency;
use <database_name>;
checkpoint;
checkpoint;
alter database <database_name> set online;
dbcc shrinkfile(<database_name>_log, 200);

It is important to note (in case you came here by Google) that "TypeError: 'str' object is not callable" means only that a variable that was declared as String-type earlier is attempted to be used as a function (e.g. by adding parantheses in the end.)

You can get the exact same error message also, if you use any other built-in method as variable name.

import csv

hello = [['Me','You'],['293', '219'],['13','15']]
length = len(hello[0])

with open('test1.csv', 'wb') as testfile:
    csv_writer = csv.writer(testfile)
    for y in range(length):
        csv_writer.writerow([x[y] for x in hello])

will produce an output like this

Me You
293 219
13 15

Hope this helps

You're doing a LEFT OUTTER JOIN which indicates that you want every tuple from the table on the LEFT of the statement regardless of it has a matching record in the RIGHT table. This being the case, your results are being pruned from the RIGHT table but you're ending up with the same results as if you didn't include the AND at all within the ON clause.

Performing the AND in the WHERE clause causes the prune to happen after the LEFT JOIN takes place.

<!DOCTYPE html>
<html>
<body>
<label>Enter your Name here: </label><br>
<input type= text id="namehere" onchange="displayname()"><br>


<script>
function displayname() {
    document.getElementById("demo").innerHTML = 
document.getElementById("namehere").value;
}

</script>


<p id="demo"></p>

</body>
</html> 

If you came here looking for an answer to this question but not exactly the way the OP meant, ie how do you get multi-line CMD to work in a single line, I have a sort of dangerous answer for you.

Trying to use this with things that actually use piping, like say findstr is quite problematic. The same goes for dealing with elses. But if you just want a multi-line conditional command to execute directly from CMD and not via a batch file, this should do work well.

Let's say you have something like this in a batch that you want to run directly in command prompt:

@echo off
for /r %%T IN (*.*) DO (
    if /i "%%~xT"==".sln" (
        echo "%%~T" is a normal SLN file, and not a .SLN.METAPROJ or .SLN.PROJ file
        echo Dumping SLN file contents
        type "%%~T"
    )
)

Now, you could use the line-continuation carat (^) and manually type it out like this, but warning, it's tedious and if you mess up you can learn the joy of typing it all out again.

Well, it won't work with just ^ thanks to escaping mechanisms inside of parentheses shrug At least not as-written. You actually would need to double up the carats like so:

@echo off ^
More? for /r %T IN (*.sln) DO (^^
More? if /i "%~xT"==".sln" (^^
More? echo "%~T" is a normal SLN file, and not a .SLN.METAPROJ or .SLN.PROJ file^^
More? echo Dumping SLN file contents^^
More? type "%~T"))

Instead, you can be a dirty sneaky scripter from the wrong side of the tracks that don't need no carats by swapping them out for a single pipe (|) per continuation of a loop/expression:

@echo off
for /r %T IN (*.sln) DO if /i "%~xT"==".sln" echo "%~T" is a normal SLN file, and not a .SLN.METAPROJ or .SLN.PROJ file | echo Dumping SLN file contents | type "%~T"

Instead of using datetime.now you should be really using from django.utils.timezone import now

Reference:

• Documentation for django.utils.timezone.now

so go for something like this:

from django.utils.timezone import now


created_date = models.DateTimeField(default=now, editable=False)

I was following the replies, When editing /etc/group I also deleted this line:

ssl-cert:x:112:postgres

then, when trying to install postgresql, I got this error

Preconfiguring packages ...
dpkg: unrecoverable fatal error, aborting:
 syntax error: unknown group 'ssl-cert' in statoverride file
E: Sub-process /usr/bin/dpkg returned an error code (2)

Putting the "ssl-cert:x:112:postgres" line back in /etc/group seems to fix it (so I was able to install postgresql)

This worked for me.

$ echo 54657374696e672031203220330 | xxd -r -p
Testing 1 2 3$

-r tells it to convert hex to ascii as opposed to its normal mode of doing the opposite

-p tells it to use a plain format.

you could also solved it by adding lazy=false into into your *.hbm.xml file or you can init your object in Hibernate.init(Object) when you get object from db

So far as I know there's no single function which does this (maybe you were looking for the inverse of MapPath?). I'd love to know if such a function exists. Until then, I would just take the filename(s) returned by GetFiles, remove the path, and prepend the URL root. This can be done generically.

You may also want to have a look at httplib2, with examples. I find using httplib2 is more concise than using the built-in HTTP modules.

You have to close that application first. There is no way to delete it, if it's used by some application.

UnLock IT is a neat utility that helps you to take control of any file or folder when it is locked by some application or system. For every locked resource, you get a list of locking processes and can unlock it by terminating those processes. EMCO Unlock IT offers Windows Explorer integration that allows unlocking files and folders by one click in the context menu.

There's also Unlocker (not recommended, see Warning below), which is a free tool which helps locate any file locking handles running, and give you the option to turn it off. Then you can go ahead and do anything you want with those files.

Warning: The installer includes a lot of undesirable stuff. You're almost certainly better off with UnLock IT.

To resolve the Could not load file or assembly 'System.Web.Http' error use NuGet to install the Web API 2.1 WebHost.

In solution explorer in the references right click and select manage nuget packages. (if not there install nuget)

In the manage NuGet Packages window on the left side click online then in top right search for Web Host and install Microsoft ASP.NET Web API 2.1 Web Host. (Once installed the install button will change to a green check)

After that the project will reload and when it's build again the error will be resolved and the project will debug and run. The error will be gone and you may be 'The resource cannot be found. Just append the url ( ex from localhost:52088/ to localhost:52088api/products )

Your question was good and helped me.

Hope this answer helps!

Button 1 Button 2 Button 3

var reply_click = function() { 
     alert("Button clicked, id "+this.id+", text"+this.innerHTML); 
} 
document.getElementById('1').onclick = reply_click; 
document.getElementById('2').onclick = reply_click; 
document.getElementById('3').onclick = reply_click;

You may change the "columnName" type from TEXT to VARCHAR(MAX). TEXT column can't be used with "=".
see this topic

To handle right click from the mouse, you can use the 'oncontextmenu' event. Below is an example:

 document.body.oncontextmenu=function(event) {
     alert(" Right click! ");
 };

the above code alerts some text when right click is pressed. If you do not want the default menu of the browser to appear, you can add return false; At the end of the content of the function. Thanks.

Yes if you are using latest java which is version 8. Java8 make it possible to define anonymous functions which was impossible in previous versions.

Lets take example from java docs to get know how we can declare anonymous functions, classes

The following example, HelloWorldAnonymousClasses, uses anonymous classes in the initialization statements of the local variables frenchGreeting and spanishGreeting, but uses a local class for the initialization of the variable englishGreeting:

public class HelloWorldAnonymousClasses {

    interface HelloWorld {
        public void greet();
        public void greetSomeone(String someone);
    }

    public void sayHello() {

        class EnglishGreeting implements HelloWorld {
            String name = "world";
            public void greet() {
                greetSomeone("world");
            }
            public void greetSomeone(String someone) {
                name = someone;
                System.out.println("Hello " + name);
            }
        }

        HelloWorld englishGreeting = new EnglishGreeting();

        HelloWorld frenchGreeting = new HelloWorld() {
            String name = "tout le monde";
            public void greet() {
                greetSomeone("tout le monde");
            }
            public void greetSomeone(String someone) {
                name = someone;
                System.out.println("Salut " + name);
            }
        };

        HelloWorld spanishGreeting = new HelloWorld() {
            String name = "mundo";
            public void greet() {
                greetSomeone("mundo");
            }
            public void greetSomeone(String someone) {
                name = someone;
                System.out.println("Hola, " + name);
            }
        };
        englishGreeting.greet();
        frenchGreeting.greetSomeone("Fred");
        spanishGreeting.greet();
    }

    public static void main(String... args) {
        HelloWorldAnonymousClasses myApp =
            new HelloWorldAnonymousClasses();
        myApp.sayHello();
    }            
}

Syntax of Anonymous Classes

Consider the instantiation of the frenchGreeting object:

    HelloWorld frenchGreeting = new HelloWorld() {
        String name = "tout le monde";
        public void greet() {
            greetSomeone("tout le monde");
        }
        public void greetSomeone(String someone) {
            name = someone;
            System.out.println("Salut " + name);
        }
    };

The anonymous class expression consists of the following:

• The new operator

• The name of an interface to implement or a class to extend. In this example, the anonymous class is implementing the interface HelloWorld.

• Parentheses that contain the arguments to a constructor, just like a normal class instance creation expression. Note: When you implement an interface, there is no constructor, so you use an empty pair of parentheses, as in this example.

• A body, which is a class declaration body. More specifically, in the body, method declarations are allowed but statements are not.

When you use an async function like

async () => {
    try {
        const response = await fetch(`https://www.reddit.com/r/${subreddit}.json`);
        const json = await response.json();
        setPosts(json.data.children.map(it => it.data));
    } catch (e) {
        console.error(e);
    }
}

it returns a promise and useEffect doesn't expect the callback function to return Promise, rather it expects that nothing is returned or a function is returned.

As a workaround for the warning you can use a self invoking async function.

useEffect(() => {
    (async function() {
        try {
            const response = await fetch(
                `https://www.reddit.com/r/${subreddit}.json`
            );
            const json = await response.json();
            setPosts(json.data.children.map(it => it.data));
        } catch (e) {
            console.error(e);
        }
    })();
}, []);

or to make it more cleaner you could define a function and then call it

useEffect(() => {
    async function fetchData() {
        try {
            const response = await fetch(
                `https://www.reddit.com/r/${subreddit}.json`
            );
            const json = await response.json();
            setPosts(json.data.children.map(it => it.data));
        } catch (e) {
            console.error(e);
        }
    };
    fetchData();
}, []);

the second solution will make it easier to read and will help you write code to cancel previous requests if a new one is fired or save the latest request response in state

Working codesandbox

I'd start by using glob:

from PIL import Image
import glob
image_list = []
for filename in glob.glob('yourpath/*.gif'): #assuming gif
    im=Image.open(filename)
    image_list.append(im)

then do what you need to do with your list of images (image_list).

Hypothetically, if search landed you on this question then you probably want this:

doReturn(someReturn).when(someObject).doSomething(argThat(argument -> argument.getName().equals("Bob")));

Why? Because like me you value time and you are not going to implement .equals just for the sake of the single test scenario.

And 99 % of tests fall apart with null returned from Mock and in a reasonable design you would avoid return null at all costs, use Optional or move to Kotlin. This implies that verify does not need to be used that often and ArgumentCaptors are just too tedious to write.

It sounds like something like the below will suit your needs:

With Sheets("Sheet1")
    .Rows( X & ":" & .Rows.Count).Delete
End With

Where X is a variable that = the row number ( 415 )

I used to think that MVC and MVVM are the same. Now because of the existence of Flux I can tell the difference:

In MVC, for each view in your app, you have a model and a controller, so I would call it view, view model, view controller. The pattern does not tell you how one view can communicate with another. Therefore, in different frameworks there are different implementations for that. For example there are implementations where controllers talk to each other whereas in other implementations there's another component that mediates between them. There are even implementations in which the view models communicate with each other, which is a break of the MVC pattern because the view model should only be accessed by the view controller.

In MVVM, you also have a view model for each component. The pattern does not specify how the heck the view should influence the view model, so usually most frameworks just include controller's functionality in the view model. However, MVVM does tell you that your view model's data should come from the model, which is the entire model that's not aware or custom to a specific view.

To demonstrate the difference, let's take Flux pattern. Flux pattern tells how different views in the app should communicate. Each view listens to a store and fires actions using the dispatcher. The dispatcher in turn tells all the stores about the action that was just made, and the stores update themselves. A store in Flux corresponds to the (general) model in MVVM. it's not custom to any specific view. So usually when people use React and Flux, each React component actually implements the MVVM pattern. When an action occurs, the view model calls the dispatcher, and finally it's getting updated according to the changes in the store, which is the model. You can't say that each component implements MVC because in MVC only the controller can update the view model. So MVVM can work with Flux together (MVVM handles the communication between the view and the view model, and Flux handles the communication between different views), whereas MVC can't work with Flux without breaking a key principle.

.on() is for jQuery version 1.7 and above. If you have an older version, use this:

$("#SomeId").live("click",function(){
    //do stuff;
});

The boxplot function returns the values used to do the plotting (which is actually then done by bxp():

bstats <- boxplot(count ~ spray, data = InsectSprays, col = "lightgray") 
#need to "waste" this plot
bstats$out <- NULL
bstats$group <- NULL
bxp(bstats)  # this will plot without any outlier points

I purposely did not answer the specific question because I consider it statistical malpractice to remove "outliers". I consider it acceptable practice to not plot them in a boxplot, but removing them just because they exceed some number of standard deviations or some number of inter-quartile widths is a systematic and unscientific mangling of the observational record.

You can also check Restlet which has full client-side capabilities, more REST oriented that lower-level libraries such as HttpURLConnection or Apache HTTP Client (which we can leverage as connectors).

Best regards, Jerome Louvel

They cause the compiler to emit the appropriate branch hints where the hardware supports them. This usually just means twiddling a few bits in the instruction opcode, so code size will not change. The CPU will start fetching instructions from the predicted location, and flush the pipeline and start over if that turns out to be wrong when the branch is reached; in the case where the hint is correct, this will make the branch much faster - precisely how much faster will depend on the hardware; and how much this affects the performance of the code will depend on what proportion of the time hint is correct.

For instance, on a PowerPC CPU an unhinted branch might take 16 cycles, a correctly hinted one 8 and an incorrectly hinted one 24. In innermost loops good hinting can make an enormous difference.

Portability isn't really an issue - presumably the definition is in a per-platform header; you can simply define "likely" and "unlikely" to nothing for platforms that do not support static branch hints.

Using Acrobat reader is not a good solution, especially command line attributes are not documented. Additionally Acrobat reader's window stays open after printing process. PDF files are well known by printer drivers, so you may find better tools, like 2Printer.exe or RawFilePrinter.exe. In my opinion RawFilePrinter has better support and clear licencing process (you pay donation once and you can redistribute RawFilePrinter in many project you like - even new versions work with previously purchased license)

RawFilePrinter.exe -p "c:\Users\Me\Desktop\mypdffile.pdf" "Canon Printer" 
IF %ERRORLEVEL% 1(
    echo "Error!"
)

Latest version to download: http://bigdotsoftware.pl/index.php/rawfileprinter

You can select dropdown option value by name

jQuery("#option_id").find("option:contains('Monday')").each(function()
{
 if( jQuery(this).text() == 'Monday' )
 {
  jQuery(this).attr("selected","selected");
  }
});

If you wanted to make your own (for semantic reasons or otherwise), see below for an example, though s/// should be all you need:

#!/usr/bin/perl -w    

use strict;     

   main();   

   sub main{    
      my $foo = "blahblahblah";          
      print '$foo: ' , replace("lah","ar",$foo) , "\n";  #$foo: barbarbar

   }        

   sub replace {
      my ($from,$to,$string) = @_;
      $string =~s/$from/$to/ig;                          #case-insensitive/global (all occurrences)

      return $string;
   }

A lot of overly-complicated answers here, perhaps because this is not easy to find in the iOS documentation. JosephH had it right above:

[[view window] endEditing:YES];

I just came across this problem when I replaced a failing disk. I had copied over the system files to the new disk, and was good about replacing the old disk's UUID entry with the new disk's UUID in fstab.

However I had not replaced the UUID in the grub.conf (sometimes menu.lst) file in /boot/grub. So check your grub.conf file, and if the "kernel" line has something like

kernel ... root=UUID=906eaa97-f66a-4d39-a39d-5091c7095987 

it likely has the old disk's UUID. Replace it with the new disk's UUID and run grub-install (if you're in a live CD rescue you may need to chroot or specify the grub directory).

All Elements

$('#tabla > tbody  > tr').each(function() {
    $(this).find("td:gt(0)").each(function(){
       alert($(this).html());
       });
});

Projections can be used to select only specific properties(columns) of an entity object.

From the docs

Spring Data Repositories usually return the domain model when using query methods. However, sometimes, you may need to alter the view of that model for various reasons. In this section, you will learn how to define projections to serve up simplified and reduced views of resources.

Define an interface with only the getters you want.

interface CustomObject {  
    String getA(); // Actual property name is A
    String getB(); // Actual property name is B 
}

Now return CustomObject from your repository like so :

public interface YOU_REPOSITORY_NAME extends JpaRepository<YOUR_ENTITY, Long> {
    CustomObject findByObjectName(String name);
}

Another case is http redirection. If your page redirects http requests to https, then may be your partial view tries to redirect by itself.

It causes same problem again. For this problem, you can reorganize your .net error pages or iis error pages configuration.

Just make sure you are redirecting requests to right error or not found page and make sure this error page contains non problematic partial. If your page supports only https, do not forward requests to error page without using https, if error page contains partial, this partials tries to redirect seperately from requested url, it causes problem.

For Python2.7(windows32) I installed only pywin32-223. And I wrote simple python`s code:

import win32api
import time
import win32con

# simulate the pressing-DOWN "ARROW key" of 200 times

for i in range(200):
   time.sleep(0.5)
   win32api.keybd_event(0x28, 0,0,0)
   time.sleep(.05)
   win32api.keybd_event(0x28,0 ,win32con.KEYEVENTF_KEYUP ,0)

It can be checked if you run the code and immediately go to the notepad window (where the text already exists) and place the cursor on the top line.

<!doctype html>
<html>
<body>
<p id = "myString">zyxtspqnmdba</p>
<p id = "orderedString"></p>
<script>
var myString = document.getElementById("myString").innerHTML;
orderString(myString);
function orderString(str) {
    var i = 0;
    var myArray = str.split("");
    while (i < str.length){
        var j = i + 1;
        while (j < str.length) {
            if (myArray[j] < myArray[i]){
                var temp = myArray[i];
                myArray[i] = myArray[j];
                myArray[j] = temp;
            }
            j++;
        }
        i++;
    }
    var newString = myArray.join("");
    document.getElementById("orderedString").innerHTML = newString;
}
</script>
</body>
</html>

I found this explanation from the Hibernate docs enlightening, because they contain a use case:

The usage and semantics of merge() seems to be confusing for new users. Firstly, as long as you are not trying to use object state loaded in one entity manager in another new entity manager, you should not need to use merge() at all. Some whole applications will never use this method.

Usually merge() is used in the following scenario:

• The application loads an object in the first entity manager
• the object is passed up to the presentation layer
• some modifications are made to the object
• the object is passed back down to the business logic layer
• the application persists these modifications by calling merge() in a second entity manager

Here is the exact semantic of merge():

• if there is a managed instance with the same identifier currently associated with the persistence context, copy the state of the given object onto the managed instance
• if there is no managed instance currently associated with the persistence context, try to load it from the database, or create a new managed instance
• the managed instance is returned
• the given instance does not become associated with the persistence context, it remains detached and is usually discarded

From: http://docs.jboss.org/hibernate/entitymanager/3.6/reference/en/html/objectstate.html

/^(?=.*\d)(?=.*[a-z])(?=.*[A-Z]).{8,}$/

You can use ScriptEngine, example:

public class Main {
    public static void main(String[] args) {
        StringBuffer javascript = null;
        ScriptEngine runtime = null;

        try {
            runtime = new ScriptEngineManager().getEngineByName("javascript");
            javascript = new StringBuffer();

            javascript.append("1 + 1");

            double result = (Double) runtime.eval(javascript.toString());

            System.out.println("Result: " + result);
        } catch (Exception ex) {
            System.out.println(ex.getMessage());
        }
    }
}

From the dplyr package you can also use the mutate_all() function in combination with toupper(). This will affect both character and factor classes.

library(dplyr)
df <- mutate_all(df, funs=toupper)

Alternatively you could use my service, https://astroip.co, it is a new Geolocation API:

$.get("https://api.astroip.co/?api_key=1725e47c-1486-4369-aaff-463cc9764026", function(response) {
    console.log(response.geo.city, response.geo.country);
});

AstroIP provides geolocation data together with security datapoints like proxy, TOR nodes and crawlers detection. The API also returns currency, timezones, ASN and company data.

It is a pretty new api with an average response time of 40ms from multiple regions around the world, which positions it in the handful list of super fast Geolocation APIs available.

Big free plan of up to 30,000 requests per month for free is available.

The number in parentheses in a type declaration is display width, which is unrelated to the range of values that can be stored in a data type. Just because you can declare Int(20) does not mean you can store values up to 10^20 in it:

[...] This optional display width may be used by applications to display integer values having a width less than the width specified for the column by left-padding them with spaces. ...

The display width does not constrain the range of values that can be stored in the column, nor the number of digits that are displayed for values having a width exceeding that specified for the column. For example, a column specified as SMALLINT(3) has the usual SMALLINT range of -32768 to 32767, and values outside the range allowed by three characters are displayed using more than three characters.

For a list of the maximum and minimum values that can be stored in each MySQL datatype, see here.

Below is the exact code you need to make your sheet look exactly as it is in the attached PDF:

try
        {
            Excel.Application application;
            Excel.Workbook workBook;
            Excel.Worksheet workSheet;
            object misValue = System.Reflection.Missing.Value;

            application = new Excel.ApplicationClass();
            workBook = application.Workbooks.Add(misValue);
            workSheet = (Excel.Worksheet)workBook.Worksheets.get_Item(1);

            int i = 1;
            workSheet.Cells[i, 2] = "MSS Close Sheet"; 
            WorkSheet.Cells[i, 2].Style.Font.Bold = true;               
            i++;
            workSheet.Cells[i, 2] = "MSS - " + dpsNoTextBox.Text;
            WorkSheet.Cells[i, 2].Style.Font.Bold = true;
            i++;
            workSheet.Cells[i, 2] = customerNameTextBox.Text;
            i++;                
            workSheet.Cells[i, 2] = "Opening Date : ";
            workSheet.Cells[i, 3] = openingDateTextBox.Value.ToShortDateString();
            i++;
            workSheet.Cells[i, 2] = "Closing Date : ";
            workSheet.Cells[i, 3] = closingDateTextBox.Value.ToShortDateString();
            i++;
            i++;
            i++;

            workSheet.Cells[i, 1] = "SL. No";
            workSheet.Cells[i, 2] = "Month";
            workSheet.Cells[i, 3] = "Amount Deposited";
            workSheet.Cells[i, 4] = "Fine";
            workSheet.Cells[i, 5] = "Cumulative Total";
            workSheet.Cells[i, 6] = "Profit + Cumulative Total";
            workSheet.Cells[i, 7] = "Profit @ " + profitRateComboBox.Text;
            WorkSheet.Cells[i, 1].EntireRow.Font.Bold = true;
            i++;



            /////////////////////////////////////////////////////////
            foreach (RecurringDeposit rd in RecurringDepositList)
            {
                workSheet.Cells[i, 1] = rd.SN.ToString();
                workSheet.Cells[i, 2] = rd.MonthYear;
                workSheet.Cells[i, 3] = rd.InstallmentSize.ToString();
                workSheet.Cells[i, 4] = "";
                workSheet.Cells[i, 5] = rd.CumulativeTotal.ToString();
                workSheet.Cells[i, 6] = rd.ProfitCumulative.ToString();
                workSheet.Cells[i, 7] = rd.Profit.ToString();
                i++;
            }
            //////////////////////////////////////////////////////


            ////////////////////////////////////////////////////////
            workSheet.Cells[i, 2] = "Total (" + RecurringDepositList.Count + " months installment)";
            WorkSheet.Cells[i, 2].Style.Font.Bold = true;
            workSheet.Cells[i, 3] = totalAmountDepositedTextBox.Value.ToString("0.00");
            i++;

            workSheet.Cells[i, 2] = "a) Total Amount Deposited";
            workSheet.Cells[i, 3] = totalAmountDepositedTextBox.Value.ToString("0.00");
            i++;

            workSheet.Cells[i, 2] = "b) Fine";
            workSheet.Cells[i, 3] = "";
            i++;

            workSheet.Cells[i, 2] = "c) Total Pft Paid";
            workSheet.Cells[i, 3] = totalProfitPaidTextBox.Value.ToString("0.00");
            i++;

            workSheet.Cells[i, 2] = "Sub Total";
            WorkSheet.Cells[i, 2].Style.Font.Bold = true;
            workSheet.Cells[i, 3] = (totalAmountDepositedTextBox.Value + totalProfitPaidTextBox.Value).ToString("0.00");
            i++;

            workSheet.Cells[i, 2] = "Deduction";
            WorkSheet.Cells[i, 2].Style.Font.Bold = true;
            i++;

            workSheet.Cells[i, 2] = "a) Excise Duty";
            workSheet.Cells[i, 3] = "0";
            i++;

            workSheet.Cells[i, 2] = "b) Income Tax on Pft. @ " + incomeTaxPercentageTextBox.Text;
            workSheet.Cells[i, 3] = "0";
            i++;

            workSheet.Cells[i, 2] = "c) Account Closing Charge ";
            workSheet.Cells[i, 3] = closingChargeCommaNumberTextBox.Value.ToString("0.00");
            i++;

            workSheet.Cells[i, 2] = "d) Outstanding on BAIM(FO) ";
            workSheet.Cells[i, 3] = baimFOLowerTextBox.Value.ToString("0.00");
            i++;

            workSheet.Cells[i, 2] = "Total Deduction ";
            WorkSheet.Cells[i, 2].Style.Font.Bold = true;
            workSheet.Cells[i, 3] = (incomeTaxDeductionTextBox.Value + closingChargeCommaNumberTextBox.Value + baimFOTextBox.Value).ToString("0.00");
            i++;

            workSheet.Cells[i, 2] = "Client Paid ";
            WorkSheet.Cells[i, 2].Style.Font.Bold = true;
            workSheet.Cells[i, 3] = customerPayableNumberTextBox.Value.ToString("0.00");
            i++;

            workSheet.Cells[i, 2] = "e) Current Balance ";
            workSheet.Cells[i, 3] = currentBalanceCommaNumberTextBox.Value.ToString("0.00");
            workSheet.Cells[i, 5] = "Exp. Pft paid on MSS A/C(PL67054)";
            workSheet.Cells[i, 6] = plTextBox.Value.ToString("0.00");
            i++;

            workSheet.Cells[i, 2] = "e) Total Paid ";
            workSheet.Cells[i, 3] = customerPayableNumberTextBox.Value.ToString("0.00");
            workSheet.Cells[i, 5] = "IT on Pft (BDT16216)";
            workSheet.Cells[i, 6] = incomeTaxDeductionTextBox.Value.ToString("0.00");
            i++;

            workSheet.Cells[i, 2] = "Difference";
            WorkSheet.Cells[i, 2].Style.Font.Bold = true;
            workSheet.Cells[i, 3] = (currentBalanceCommaNumberTextBox.Value - customerPayableNumberTextBox.Value).ToString("0.00");
            workSheet.Cells[i, 5] = "Account Closing Charge";
            workSheet.Cells[i, 6] = closingChargeCommaNumberTextBox.Value;
            i++;

            ///////////////////////////////////////////////////////////////

            workBook.SaveAs("D:\\" + dpsNoTextBox.Text.Trim() + "-" + customerNameTextBox.Text.Trim() + ".xls", Excel.XlFileFormat.xlWorkbookNormal, misValue, misValue, misValue, misValue, Excel.XlSaveAsAccessMode.xlExclusive, misValue, misValue, misValue, misValue, misValue);
            workBook.Close(true, misValue, misValue);
            application.Quit();

            releaseObject(workSheet);
            releaseObject(workBook);
            releaseObject(application);

• git stash to save your uncommited changes
• git stash list to list your saved uncommited stashes
• git stash apply stash@{x} where x can be 0,1,2..no of stashes that you have made

with laravel pagination

file.component.ts file

    datasource: any = {
        data: []
    }

    loadData() {
        this.service.find(this.params).subscribe((res: any) => {
            this.datasource = res;
        });
    }

html file

   <tr *ngFor="let item of datasource.data; let i = index">
       <th>{{ datasource.from + i }}</th>
   </tr>

Many people on this thread and on google explain very well that attr_accessible specifies a whitelist of attributes that are allowed to be updated in bulk (all the attributes of an object model together at the same time) This is mainly (and only) to protect your application from "Mass assignment" pirate exploit.

This is explained here on the official Rails doc : Mass Assignment

attr_accessor is a ruby code to (quickly) create setter and getter methods in a Class. That's all.

Now, what is missing as an explanation is that when you create somehow a link between a (Rails) model with a database table, you NEVER, NEVER, NEVER need attr_accessor in your model to create setters and getters in order to be able to modify your table's records.

This is because your model inherits all methods from the ActiveRecord::Base Class, which already defines basic CRUD accessors (Create, Read, Update, Delete) for you. This is explained on the offical doc here Rails Model and here Overwriting default accessor (scroll down to the chapter "Overwrite default accessor")

Say for instance that: we have a database table called "users" that contains three columns "firstname", "lastname" and "role" :

SQL instructions :

CREATE TABLE users (
  firstname string,
  lastname string
  role string
);

I assumed that you set the option config.active_record.whitelist_attributes = true in your config/environment/production.rb to protect your application from Mass assignment exploit. This is explained here : Mass Assignment

Your Rails model will perfectly work with the Model here below :

class User < ActiveRecord::Base

end

However you will need to update each attribute of user separately in your controller for your form's View to work :

def update
    @user = User.find_by_id(params[:id])
    @user.firstname = params[:user][:firstname]
    @user.lastname = params[:user][:lastname]

    if @user.save
        # Use of I18 internationalization t method for the flash message
        flash[:success] = t('activerecord.successful.messages.updated', :model => User.model_name.human)
    end

    respond_with(@user)
end

Now to ease your life, you don't want to make a complicated controller for your User model. So you will use the attr_accessible special method in your Class model :

class User < ActiveRecord::Base

  attr_accessible :firstname, :lastname

end

So you can use the "highway" (mass assignment) to update :

def update
    @user = User.find_by_id(params[:id])

    if @user.update_attributes(params[:user])
        # Use of I18 internationlization t method for the flash message
        flash[:success] = t('activerecord.successful.messages.updated', :model => User.model_name.human)
    end

    respond_with(@user)
end

You didn't add the "role" attributes to the attr_accessible list because you don't let your users set their role by themselves (like admin). You do this yourself on another special admin View.

Though your user view doesn't show a "role" field, a pirate could easily send a HTTP POST request that include "role" in the params hash. The missing "role" attribute on the attr_accessible is to protect your application from that.

You can still modify your user.role attribute on its own like below, but not with all attributes together.

@user.role = DEFAULT_ROLE

Why the hell would you use the attr_accessor?

Well, this would be in the case that your user-form shows a field that doesn't exist in your users table as a column.

For instance, say your user view shows a "please-tell-the-admin-that-I'm-in-here" field. You don't want to store this info in your table. You just want that Rails send you an e-mail warning you that one "crazy" ;-) user has subscribed.

To be able to make use of this info you need to store it temporarily somewhere. What more easy than recover it in a user.peekaboo attribute ?

So you add this field to your model :

class User < ActiveRecord::Base

  attr_accessible :firstname, :lastname
  attr_accessor :peekaboo

end

So you will be able to make an educated use of the user.peekaboo attribute somewhere in your controller to send an e-mail or do whatever you want.

ActiveRecord will not save the "peekaboo" attribute in your table when you do a user.save because she don't see any column matching this name in her model.

An important point to be noted here is that if your key is an object of user-defined class in java then make it a point to override the equals method. Because the HashMap.get(Object key) method uses the equals method for matching the key value. If you do not override the equals method then it will try to find the value simply based on the reference of the key and not the actual value of key in which case it will always return a null.

I needed to copy a table from one database another database. For anyone using a GUI like Sequel Ace you can right click table and click 'copy create table syntax' and run that query (you can edit the query, e.g. change table name, remove foreign keys, add/remove columns if desired)

Using Base64 string in JSON will be very heavy. The parser has to do a lot of heavy lifting. Currently, Fresco only supports base supports Base64. Better you put something on Amazon Cloud or Firebase Cloud. And get an image as a URL. So that you can use Picasso or Glide for caching.

A @ViewScoped bean lives exactly as long as a JSF view. It usually starts with a fresh new GET request, or with a navigation action, and will then live as long as the enduser submits any POST form in the view to an action method which returns null or void (and thus navigates back to the same view). Once you refresh the page, or return a non-null string (even an empty string!) navigation outcome, then the view scope will end.

A @RequestScoped bean lives exactly as long a HTTP request. It will thus be garbaged by end of every request and recreated on every new request, hereby losing all changed properties.

A @ViewScoped bean is thus particularly more useful in rich Ajax-enabled views which needs to remember the (changed) view state across Ajax requests. A @RequestScoped one would be recreated on every Ajax request and thus fail to remember all changed view state. Note that a @ViewScoped bean does not share any data among different browser tabs/windows in the same session like as a @SessionScoped bean. Every view has its own unique @ViewScoped bean.

See also:

• How to choose the right bean scope?
• The benefits and pitfalls of @ViewScoped

Laravel 5.8

Controller

return back()->with('error', 'Incorrect username or password.');

Blade

  @if (Session::has('error'))
       <div class="alert alert-warning" role="alert">
           {{Session::get('error')}}
       </div>
  @endif

For this problem, as for many others involving non-trivial left joins such as left-joining on inner-joined tables, I find it convenient and somewhat more readable to split the query with a with clause. In your example,

with settings_for_char as (
  select setting_id, value from character_settings where character_id = 1
)
select
  settings.*,
  settings_for_char.value
from
  settings
  left join settings_for_char on settings_for_char.setting_id = settings.id;

That doesn't set the format of the string; it sets the format of the file. Even with that header, "hello" is a byte string, not a Unicode string. To make it Unicode, you're going to have to use u"hello" everywhere. The header is just a hint of what format to use when reading the .py file.

Please, Check this out, I hope it's help

<div class="row">
 <iframe class="col-lg-12 col-md-12 col-sm-12" src="http://www.w3schools.com">
 </iframe>
</div>

I am looking for this kind of solution for my self as well. I found reference in terms aggregation.

So, according to that following is the proper solution.

{
"aggs" : {
    "langs" : {
        "terms" : { "field" : "language",  
                    "size" : 500 }
    }
}}

But if you ran into following error:

"error": {
        "root_cause": [
            {
                "type": "illegal_argument_exception",
                "reason": "Fielddata is disabled on text fields by default. Set fielddata=true on [fastest_method] in order to load fielddata in memory by uninverting the inverted index. Note that this can however use significant memory. Alternatively use a keyword field instead."
            }
        ]}

In that case, you have to add "KEYWORD" in the request, like following:

   {
    "aggs" : {
        "langs" : {
            "terms" : { "field" : "language.keyword",  
                        "size" : 500 }
        }
    }}

Indexing in python starting from 0. You wrote [1:] this would not return you a first char in any case - this will return you a rest(except first char) of string.

If you have the following structure:

mylist = ['base', 'sample', 'test']

And want to get fist char for the first one string(item):

myList[0][0]
>>> b

If all first chars:

[x[0] for x in myList]
>>> ['b', 's', 't']    

If you have a text:

text = 'base sample test'
text.split()[0][0]
>>> b

In Program.cs, between:

static int Main(string[] agrs)
{

and the rest of your code, add:

#if DEBUG
    int rtn = Main2(args);
    Console.WriteLine("return " + rtn);
    Console.WriteLine("ENTER to continue.");
    Console.Read();
    return rtn;
}

static int Main2(string[] args)
{
#endif

from inside vim, use one of the following

open a new window below the current one:

:new filename.ext

open a new window beside the current one:

:vert new filename.ext

I ran into the exact same problem. Had to make a Web Socket call. I was able to accomplish this using Advanced Rest Client. I'm using ARC version : 12.1.3

I would suggest using String.format() if you need the value as a String in your code.

For example, you can use String.format() in the following way:

float myFloat = 2.001f;

String formattedString = String.format("%.02f", myFloat);

Try using printf function or the concatination operator

http://php.net/manual/en/function.printf.php

This solution will work regardless of the number of char variables you have:

char c1 = 'z';
char c2 = 'w';
std::string s1{c1};
std::string s12{c1, c2};

Hope this will help you .

Here is Html code:-

    <body>
    <div ng-controller="MyController" class="container">
      <h1>Modal example</h1>
      <button ng-click="open()" class="btn btn-primary">Test Modal</button>

      <modal title="Login form" visible="showModal">
        <form role="form">

        </form>
      </modal>
    </div>
</body>

AngularJs code:-

var mymodal = angular.module('mymodal', []);

mymodal.controller('MyController', function ($scope) {
    $scope.showModal = false;
    $scope.open = function(){
    $scope.showModal = !$scope.showModal;
    };
  });

mymodal.directive('modal', function () {
    return {
      template: '<div class="modal fade">' + 
          '<div class="modal-dialog">' + 
            '<div class="modal-content">' + 
              '<div class="modal-header">' + 
                '<button type="button" class="close" data-dismiss="modal" aria-hidden="true">&times;</button>' + 
                '<h4 class="modal-title">{{ title }}</h4>' + 
              '</div>' + 
              '<div class="modal-body" ng-transclude></div>' + 
            '</div>' + 
          '</div>' + 
        '</div>',
      restrict: 'E',
      transclude: true,
      replace:true,
      scope:true,
      link: function postLink(scope, element, attrs) {
        scope.title = attrs.title;

        scope.$watch(attrs.visible, function(value){
          if(value == true)
            $(element).modal('show');
          else
            $(element).modal('hide');
        });

        $(element).on('shown.bs.modal', function(){
          scope.$apply(function(){
            scope.$parent[attrs.visible] = true;
          });
        });

        $(element).on('hidden.bs.modal', function(){
          scope.$apply(function(){
            scope.$parent[attrs.visible] = false;
          });
        });
      }
    };
  });

Check this--jsfiddle

In order to download that driver you must have a license to SPSS. For those who do not, there is an open source tool that is very much like SPSS and will allow you to import SAV files and export them to CSV.

Here's the software

And here are the steps to export the data.

This method of selection is built-in and well covered in the Vim help. It covers XML tags and more.

See :help text-objects.

If you are dealing with a collection with a key (e.g. entries from a database) a quick (i.e. faster than the selected answer) solution would be

collection.OrderByDescending(c => c.Key).Take(3).OrderBy(c => c.Key);

Use this:

function AmexCardnumber(inputtxt) {
  var cardno = /^(?:3[47][0-9]{13})$/;
  return cardno.test(inputtxt);
}

function VisaCardnumber(inputtxt) {
  var cardno = /^(?:4[0-9]{12}(?:[0-9]{3})?)$/;
  return cardno.test(inputtxt);
}

function MasterCardnumber(inputtxt) {
  var cardno = /^(?:5[1-5][0-9]{14})$/;
  return cardno.test(inputtxt);
}

function DiscoverCardnumber(inputtxt) {
  var cardno = /^(?:6(?:011|5[0-9][0-9])[0-9]{12})$/;
  return cardno.test(inputtxt);
}

function DinerClubCardnumber(inputtxt) {
  var cardno = /^(?:3(?:0[0-5]|[68][0-9])[0-9]{11})$/;
  return cardno.test(inputtxt);
}

function JCBCardnumber(inputtxt) {
  var cardno = /^(?:(?:2131|1800|35\d{3})\d{11})$/;
  return cardno.test(inputtxt);
}

function IsValidCreditCardNumber(cardNumber) {

  var cardType = null;
  if (VisaCardnumber(cardNumber)) {
    cardType = "visa";
  } else if (MasterCardnumber(cardNumber)) {
    cardType = "mastercard";
  } else if (AmexCardnumber(cardNumber)) {
    cardType = "americanexpress";
  } else if (DiscoverCardnumber(cardNumber)) {
    cardType = "discover";
  } else if (DinerClubCardnumber(cardNumber)) {
    cardType = "dinerclub";
  } else if (JCBCardnumber(cardNumber)) {
    cardType = "jcb";
  }

  return cardType;
}

With recent builds of mongodb community edition, this is straightforward.

When you install via brew, it tells you what exactly to do. There is no need to create a new launch control file.

$ brew install mongodb
==> Downloading https://homebrew.bintray.com/bottles/mongodb-3.0.6.yosemite.bottle.tar.gz ### 100.0%
==> Pouring mongodb-3.0.6.yosemite.bottle.tar.gz
==> Caveats
To have launchd start mongodb at login:
  ln -sfv /usr/local/opt/mongodb/*.plist ~/Library/LaunchAgents
Then to load mongodb now:
  launchctl load ~/Library/LaunchAgents/homebrew.mxcl.mongodb.plist
Or, if you don't want/need launchctl, you can just run:
  mongod --config /usr/local/etc/mongod.conf
==> Summary
  /usr/local/Cellar/mongodb/3.0.6: 17 files, 159M

This Should Work:

import glob
extensions = ('*.txt', '*.mdown', '*.markdown')
for i in extensions:
    for files in glob.glob(i):
        print (files)

ConfigurationSettings.AppSettings is deprecated, see here:

http://msdn.microsoft.com/en-us/library/system.configuration.configurationsettings.appsettings.aspx

That said, it should still work.

Just a suggestion, but have you confirmed that your application configuration is the one your executable is using?

Try attaching a debugger and checking the following value:

AppDomain.CurrentDomain.SetupInformation.ConfigurationFile

And then opening the configuration file and verifying the section is there as you expected.

The URL structure you're referring to is called the REST endpoint, as opposed to the Web Site Endpoint.

Note: Since this answer was originally written, S3 has rolled out dualstack support on REST endpoints, using new hostnames, while leaving the existing hostnames in place. This is now integrated into the information provided, below.

If your bucket is really in the us-east-1 region of AWS -- which the S3 documentation formerly referred to as the "US Standard" region, but was subsequently officially renamed to the "U.S. East (N. Virginia) Region" -- then http://s3-us-east-1.amazonaws.com/bucket/ is not the correct form for that endpoint, even though it looks like it should be. The correct format for that region is either http://s3.amazonaws.com/bucket/ or http://s3-external-1.amazonaws.com/bucket/.¹

The format you're using is applicable to all the other S3 regions, but not US Standard US East (N. Virginia) [us-east-1].

S3 now also has dual-stack endpoint hostnames for the REST endpoints, and unlike the original endpoint hostnames, the names of these have a consistent format across regions, for example s3.dualstack.us-east-1.amazonaws.com. These endpoints support both IPv4 and IPv6 connectivity and DNS resolution, but are otherwise functionally equivalent to the existing REST endpoints.

If your permissions and configuration are set up such that the web site endpoint works, then the REST endpoint should work, too.

However... the two endpoints do not offer the same functionality.

Roughly speaking, the REST endpoint is better-suited for machine access and the web site endpoint is better suited for human access, since the web site endpoint offers friendly error messages, index documents, and redirects, while the REST endpoint doesn't. On the other hand, the REST endpoint offers HTTPS and support for signed URLs, while the web site endpoint doesn't.

Choose the correct type of endpoint (REST or web site) for your application:

http://docs.aws.amazon.com/AmazonS3/latest/dev/WebsiteEndpoints.html#WebsiteRestEndpointDiff

¹ s3-external-1.amazonaws.com has been referred to as the "Northern Virginia endpoint," in contrast to the "Global endpoint" s3.amazonaws.com. It was unofficially possible to get read-after-write consistency on new objects in this region if the "s3-external-1" hostname was used, because this would send you to a subset of possible physical endpoints that could provide that functionality. This behavior is now officially supported on this endpoint, so this is probably the better choice in many applications. Previously, s3-external-2 had been referred to as the "Pacific Northwest endpoint" for US-Standard, though it is now a CNAME in DNS for s3-external-1 so s3-external-2 appears to have no purpose except backwards-compatibility.