EasyPHP is very good :

• lightweight & portable : no windows service (like wamp)
• easy to configure (all configuration files in the same folder : httpd.conf, php.ini & my.ini)
• auto restarts apache when you edit httpd.conf

WAMP or UWAMP are good choices if you need to test with multiples versions of PHP and Apache.

But you can also use multiple versions of PHP with EasyPHP (by downloading the PHP version you need on php.net, and loading this version by editing httpd.conf) :

LoadModule php4_module "${path}/php4/php4apache2_2.dll"

It might be too late to answer this but I just had the problem and I kept installing and uninstalling, it turns out the the problem happens when you're installing pandas to a version of python and trying to run the program using another python version

So to start off, run:

which python
python --version
which pip

make sure both are aligned, most probably, python is 2.7 and pip is working on 3.x or pip is coming from anaconda's python version which is highly likely to be 3.x as well

Incase of python redirects to 2.7, and pip redirects to pip3, install pandas using pip install pandas and use python3 file_name.py to run the program.

Using junit4 and Hamcrest you get a concise method of comparing arrays. It also gives details of where the error is in the failure trace.

import static org.junit.Assert.*
import static org.hamcrest.CoreMatchers.*;

//...

assertThat(result, is(new int[] {56, 100, 2000}));

Failure Trace output:

java.lang.AssertionError: 
   Expected: is [<56>, <100>, <2000>]
   but: was [<55>, <100>, <2000>]

An easier way to get the machine epsilon for a given float type is to use np.finfo():

print(np.finfo(float).eps)
# 2.22044604925e-16

print(np.finfo(np.float32).eps)
# 1.19209e-07

import codecs

decode_hex = codecs.getdecoder("hex_codec")

# for an array
msgs = [decode_hex(msg)[0] for msg in msgs]

# for a string
string = decode_hex(string)[0]

My recommendation would be instead of declaring it in the json stylus to put it in the scss so that everything is compiled and in one place.

1)install bootstrap with npm

 npm install bootstrap

2) Declare bootstrap npm in the css with our styles

Create _bootstrap-custom.scss:

  // Required
  @import "bootstrap-custom-required";


  // Optional
  @import "~bootstrap/scss/root";
  @import "~bootstrap/scss/grid";
  @import "~bootstrap/scss/tables";

    ...
    ..
    .

3) Within the styles.scss we insert

@import "bootstrap-custom";

so we will have all our core compiled and in one place

Example for CoffeeScript:

test = (str, callback) ->
  data = "Input values"
  $.ajax
    type: "post"
    url: "http://www.mydomain.com/ajaxscript"
    data: data
    success: callback

test (data, textStatus, xhr) ->
  alert data + "\t" + textStatus

When you download the connector/NET choose Select Platform = .NET & Mono (not windows!)

Java supports^* covariant return types for overridden methods. This means an overridden method may have a more specific return type. That is, as long as the new return type is assignable to the return type of the method you are overriding, it's allowed.

For example:

class ShapeBuilder {
    ...
    public Shape build() {
    ....
}

class CircleBuilder extends ShapeBuilder{
    ...
    @Override
    public Circle build() {
    ....
}

This is specified in section 8.4.5 of the Java Language Specification:

Return types may vary among methods that override each other if the return types are reference types. The notion of return-type-substitutability supports covariant returns, that is, the specialization of the return type to a subtype.

A method declaration d1 with return type R1 is return-type-substitutable for another method d2 with return type R2, if and only if the following conditions hold:

• If R1 is void then R2 is void.

• If R1 is a primitive type, then R2 is identical to R1.

• If R1 is a reference type then:

  • R1 is either a subtype of R2 or R1 can be converted to a subtype of R2 by unchecked conversion (§5.1.9), or

  • R1 = |R2|

("|R2|" refers to the erasure of R2, as defined in §4.6 of the JLS.)

^{* Prior to Java 5, Java had invariant return types, which meant the return type of a method override needed to exactly match the method being overridden.}

This is pretty much what the generic method Value() is for. You get exactly the behavior you want if you combine it with nullable value types and the ?? operator:

width = jToken.Value<double?>("width") ?? 100;

What about using something like mod_proxy? Then it looks to your browser like the requests are going to the same server, but they're really being forwarded to another server.

This functionality has been added to the IDE now (working Pycharm 2018.3)

Just click the EnvFile tab in the run configuration, click Enable EnvFile and click the + icon to add an env file

Update: Essentially the same as the answer by @imguelvargasf but the the plugin was enabled by default for me.

To disable UAC go to Start>Control Panel>User Accounts there you will find an option Turn User Account Control on or off just click on it and uncheck User Account Control to help protect your computer click OK.

Please refer to this link : https://community.apachefriends.org/f/viewtopic.php?f=16&t=45364

1. Set var step=1 as global variable by putting it above the function call
2. put semicolons

It will look like this

<head>
<script type="text/javascript">
var image1 = new Image()
image1.src = "images/pentagg.jpg"
var image2 = new Image()
image2.src = "images/promo.jpg"
</script>
</head>
<body>
<p><img src="images/pentagg.jpg" width="500" height="300" name="slide" /></p>
<script type="text/javascript">
        var step=1;
        function slideit()
        {
            document.images.slide.src = eval("image"+step+".src");
            if(step<2)
                step++;
            else
                step=1;
            setTimeout("slideit()",2500);
        }
        slideit();
</script>
</body>

res = request.GET['paymentid'] will raise a KeyError if paymentid is not in the GET data.

Your sample php code checks to see if paymentid is in the POST data, and sets $payID to '' otherwise:

$payID = isset($_POST['paymentid']) ? $_POST['paymentid'] : ''

The equivalent in python is to use the get() method with a default argument:

payment_id = request.POST.get('payment_id', '')

while debugging, this is what I see in the response.GET: <QueryDict: {}>, request.POST: <QueryDict: {}>

It looks as if the problem is not accessing the POST data, but that there is no POST data. How are you are debugging? Are you using your browser, or is it the payment gateway accessing your page? It would be helpful if you shared your view.

Once you are managing to submit some post data to your page, it shouldn't be too tricky to convert the sample php to python.

Or if it's from a database context you can use

@Html.DropDownListFor(model => model.MyOption, db.MyOptions.Select(x => new SelectListItem { Text = x.Name, Value = x.Id.ToString() }))

Just an observation I just made while building naive code on OSX with cmake:

cmake ... -DBUILD_SHARED_LIBS=OFF ...

creates .so files

while

cmake ... -DBUILD_SHARED_LIBS=ON ...

creates .dynlib files.

Perhaps this helps anyone.

You can use the -p parameter, which is documented as:

-p, --parents

no error if existing, make parent directories as needed

So:

mkdir -p "$BACKUP_DIR/$client/$year/$month/$day"

You can use cookies if the data is small enough and does not present a security concern. The same HttpContext.Current based approach should work.

Request and response HTTP headers can also be used to pass information between service calls.

Machine learning: It explores the study and construction of algorithms that can learn from and make predictions on data.Such algorithms operate by building a model from example inputs in order to make data-driven predictions or decisions expressed as outputs,rather than following strictly static program instructions.

Supervised learning: It is the machine learning task of inferring a function from labeled training data.The training data consist of a set of training examples. In supervised learning, each example is a pair consisting of an input object (typically a vector) and a desired output value (also called the supervisory signal). A supervised learning algorithm analyzes the training data and produces an inferred function, which can be used for mapping new examples.

The computer is presented with example inputs and their desired outputs, given by a "teacher", and the goal is to learn a general rule that maps inputs to outputs.Specifically, a supervised learning algorithm takes a known set of input data and known responses to the data (output), and trains a model to generate reasonable predictions for the response to new data.

Unsupervised learning: It is learning without a teacher. One basic thing that you might want to do with data is to visualize it. It is the machine learning task of inferring a function to describe hidden structure from unlabeled data. Since the examples given to the learner are unlabeled, there is no error or reward signal to evaluate a potential solution. This distinguishes unsupervised learning from supervised learning. Unsupervised learning uses procedures that attempt to find natural partitions of patterns.

With unsupervised learning there is no feedback based on the prediction results, i.e., there is no teacher to correct you.Under the Unsupervised learning methods no labeled examples are provided and there is no notion of the output during the learning process. As a result, it is up to the learning scheme/model to find patterns or discover the groups of the input data

You should use unsupervised learning methods when you need a large amount of data to train your models, and the willingness and ability to experiment and explore, and of course a challenge that isn’t well solved via more-established methods.With unsupervised learning it is possible to learn larger and more complex models than with supervised learning.Here is a good example on it

.

xCode version 11.2.1 is necessary for building app in iPad 13.2.3, When I directly try to upgrade from xcode 11.1 to 11.2.1 through App Store it get struck, So after some research , I found a solution to upgrade by removing the existing xcode from the system

So here I am adding the steps to upgrade after uninstalling existing xcode.

1. Go to Applications and identify Xcode and drag it to trash.
2. Empty trash to permenently delete Xcode.
3. Now go to ~/Library/Developer/ folder and remove the contents completely Use sudo rm -rf ~/Library/Developer/ to avoid any permission issue while deleting
4. Lastly remove any cache directory associated with xcode in the path ~/Library/Caches/com.apple.dt.Xcode sudo rm -rf ~/Library/Caches/com.apple.dt.Xcode/*
5. After completing the above steps you can easly install xcode from App Store, which will install the current latest version of xcode

Note: Please take a backup of your existing projects before making the above changes

Okay, most things should be clear so far... the tricky part is the SQL: if it is not in reality running in another thread or process in it’s entirety, the SQL-execution has to be broken down into individual steps (by an SQL processor made for asynchronous execution!), where the non-blocking ones are executed, and the blocking ones (e.g. the sleep) actually can be transferred to the kernel (as an alarm interrupt/event) and put on the event list for the main loop.

That means, e.g. the interpretation of the SQL, etc. is done immediately, but during the wait (stored as an event to come in the future by the kernel in some kqueue, epoll, ... structure; together with the other IO operations) the main loop can do other things and eventually check if something happened of those IOs and waits.

So, to rephrase it again: the program is never (allowed to get) stuck, sleeping calls are never executed. Their duty is done by the kernel (write something, wait for something to come over the network, waiting for time to elapse) or another thread or process. – The Node process checks if at least one of those duties is finished by the kernel in the only blocking call to the OS once in each event-loop-cycle. That point is reached, when everything non-blocking is done.

Clear? :-)

I don’t know Node. But where does the c.query come from?

There is delete, delete_all, destroy, and destroy_all.

The docs are: older docs and Rails 3.0.0 docs

delete doesn't instantiate the objects, while destroy does. In general, delete is faster than destroy.

Since Gradle 4.9, the command line arguments can be passed with --args. For example, if you want to launch the application with command line arguments foo --bar, you can use

gradle run --args='foo --bar'

See Also Gradle Application Plugin

How to upgrade Gradle wrapper

Use NSLog() like this:

NSLog(@"The code runs through here!");

Or like this - with placeholders:

float aFloat = 5.34245;
NSLog(@"This is my float: %f \n\nAnd here again: %.2f", aFloat, aFloat);

In NSLog() you can use it like + (id)stringWithFormat:(NSString *)format, ...

float aFloat = 5.34245;
NSString *aString = [NSString stringWithFormat:@"This is my float: %f \n\nAnd here again: %.2f", aFloat, aFloat];

You can add other placeholders, too:

float aFloat = 5.34245;
int aInteger = 3;
NSString *aString = @"A string";
NSLog(@"This is my float: %f \n\nAnd here is my integer: %i \n\nAnd finally my string: %@", aFloat, aInteger, aString);

sometimes if the same pid is running after reboot tomcat will not start

my pid file was at apache-tomcat/temp/tomcat.pid

 change file apache-tomcat/bin/catalina.sh about line 386 
 from "ps -p $PID >/dev/null 2>&1"
 to "ps -fp $PID |grep catalina >/dev/null 2>&1"

excerpt from catalina.sh file

 if [ ! -z "$CATALINA_PID" ]; then
    if [ -f "$CATALINA_PID" ]; then
      if [ -s "$CATALINA_PID" ]; then
        echo "Existing PID file found during start."
        if [ -r "$CATALINA_PID" ]; then
          PID=`cat "$CATALINA_PID"`
          ps -fp $PID |grep catalina >/dev/null 2>&1  #this line
          if [ $? -eq 0 ] ; then
            echo "Tomcat appears to still be running with PID $PID. Start aborted."
            echo "If the following process is not a Tomcat process, remove the PID file and try again:"
            ps -f -p $PID
            exit 1
          else
            echo "Removing/clearing stale PID file."
            rm -f "$CATALINA_PID" >/dev/null 2>&1
            if [ $? != 0 ]; then
              if [ -w "$CATALINA_PID" ]; then
                cat /dev/null > "$CATALINA_PID"
              else
                echo "Unable to remove or clear stale PID file. Start aborted."
                exit 1
              fi
            fi
          fi
        else
          echo "Unable to read PID file. Start aborted."

Basically, ajax request as well as synchronous request sends your document cookies automatically. So, you need to set your cookie to document, not to request. However, your request is cross-domain, and things became more complicated. Basing on this answer, additionally to set document cookie, you should allow its sending to cross-domain environment:

type: "GET",    
url: "http://example.com",
cache: false,
// NO setCookies option available, set cookie to document
//setCookies: "lkfh89asdhjahska7al446dfg5kgfbfgdhfdbfgcvbcbc dfskljvdfhpl",
crossDomain: true,
dataType: 'json',
xhrFields: {
    withCredentials: true
},
success: function (data) {
    alert(data);
});

var d = new Date();
var v = new Date();
v.setMinutes(d.getMinutes()+20);

Another possibility is that setting dataType: json causes JQuery to send the Content-Type: application/json header. This is considered a non-standard header by CORS, and requires a CORS preflight request. So a few things to try:

1) Try configuring your server to send the proper preflight responses. This will be in the form of additional headers like Access-Control-Allow-Methods and Access-Control-Allow-Headers.

2) Drop the dataType: json setting. JQuery should request Content-Type: application/x-www-form-urlencoded by default, but just to be sure, you can replace dataType: json with contentType: 'application/x-www-form-urlencoded'

Try This Code, it will capitalize first character of all words.

- set addTextChangedListener for EditText view

edt_text.addTextChangedListener(watcher);

- Add TextWatcher

TextWatcher watcher = new TextWatcher() {
    int mStart = 0;

    @Override
    public void beforeTextChanged(CharSequence s, int start, int count, int after) {
    }

    @Override
    public void onTextChanged(CharSequence s, int start, int before, int count) {
        mStart = start + count;
    }

    @Override
    public void afterTextChanged(Editable s) {
        String input = s.toString();
        String capitalizedText;
        if (input.length() < 1)
            capitalizedText = input;
        else if (input.length() > 1 && input.contains(" ")) {
            String fstr = input.substring(0, input.lastIndexOf(" ") + 1);
            if (fstr.length() == input.length()) {
                capitalizedText = fstr;
            } else {
                String sstr = input.substring(input.lastIndexOf(" ") + 1);
                sstr = sstr.substring(0, 1).toUpperCase() + sstr.substring(1);
                capitalizedText = fstr + sstr;
            }
        } else
            capitalizedText = input.substring(0, 1).toUpperCase() + input.substring(1);

        if (!capitalizedText.equals(edt_text.getText().toString())) {
            edt_text.addTextChangedListener(new TextWatcher() {
                @Override
                public void beforeTextChanged(CharSequence s, int start, int count, int after) {

                }

                @Override
                public void onTextChanged(CharSequence s, int start, int before, int count) {

                }

                @Override
                public void afterTextChanged(Editable s) {
                    edt_text.setSelection(mStart);
                    edt_text.removeTextChangedListener(this);
                }
            });
            edt_text.setText(capitalizedText);
        }
    }
};

If you want to convert an int which is in the range 0-9 to a char, you may usually write something like this:

int x;
char c = '0' + x;

Now, if you want a character string, just add a terminating '\0' char:

char s[] = {'0' + x, '\0'};

Note that:

1. You must be sure that the int is in the 0-9 range, otherwise it will fail,
2. It works only if character codes for digits are consecutive. This is true in the vast majority of systems, that are ASCII-based, but this is not guaranteed to be true in all cases.

If source is an object variable, instanceof is a way of checking to see if it is a Button or not.

Have a look at this answer: Encrypt and decrypt with AES and Base64 encoding

I have tried above solutions but none worked with version 4x.

What i want to achieve is: clear all options but don't touch the placeholder. This code works for me.

selector.find('option:not(:first)').remove().trigger('change');

There's really no need to read line-by-line. You can get the whole thing like this:

import urllib
txt = urllib.urlopen(target_url).read()

I needed something similar, and came up with using the :before (or :after) pseudoclasses:

#mydiv {
   background-color: #fbb;
   margin-top: 100px;
   position: relative;
}
#mydiv:before {
   content: "";
   background-color: #bfb;
   top: -100px;
   height: 100px;
   width: 100%;
   position: absolute;
}

JSFiddle

I'm not sure what some of the answers are talking about, but I need to put this answer here for when I search in Google next time. Keywords: "How to load a UIView from a nib" or "How to load a UIView from an NSBundle."

Here's the code almost 100% straight up from the Apress Beginning iPhone 3 book (page 247, "Using The New Table View Cell"):

- (void)viewDidLoad {
    [super viewDidLoad];
    NSArray *bundle = [[NSBundle mainBundle] loadNibNamed:@"Blah"
                                                 owner:self options:nil];
    Blah *blah;
    for (id object in bundle) {
        if ([object isKindOfClass:[Blah class]]) {
            blah = (Blah *)object;
            break;
        }
    }   
    assert(blah != nil && "blah can't be nil");
    [self.view addSubview: blah];
} 

This supposes you have a UIView subclass called Blah, a nib called Blah which contains a UIView which has its class set to Blah.

Category: NSObject+LoadFromNib

#import "NSObject+LoadFromNib.h"

@implementation NSObject (LoadFromNib)

+ (id)loadFromNib:(NSString *)name classToLoad:(Class)classToLoad {
    NSArray *bundle = [[NSBundle mainBundle] loadNibNamed:name owner:self options:nil];
    for (id object in bundle) {
        if ([object isKindOfClass:classToLoad]) {
            return object;
        }
    }
    return nil;
}

@end

Swift Extension

extension UIView {
    class func loadFromNib<T>(withName nibName: String) -> T? {
        let nib  = UINib.init(nibName: nibName, bundle: nil)
        let nibObjects = nib.instantiate(withOwner: nil, options: nil)
        for object in nibObjects {
            if let result = object as? T {
                return result
            }
        }
        return nil
    }
}

And an example in use:

class SomeView: UIView {
    class func loadFromNib() -> SomeView? {
        return self.loadFromNib(withName: "SomeView")
    }
}

You don't need the CELL() part of your formulas:

=INDIRECT(ADDRESS(B1,B2))

or

=OFFSET($A$1, B1-1,B2-1)

will both work. Note that both INDIRECT and OFFSET are volatile functions. Volatile functions can slow down calculation because they are calculated at every single recalculation.

Just tested it myself and here's how I approached it. Pretty straight forward, let me know if you need any clarification

HTML

<div id="map_canvas" style="width:700px; height:500px; margin-left:80px;" ></div>
<button onclick="displayMap()">Show Map</button>

CSS

<style type="text/css">
#map_canvas {display:none;}
</style>

Javascript

<script>
function displayMap()
{
    document.getElementById( 'map_canvas' ).style.display = "block";
    initialize();
}
function initialize()
{
    // create the map
    var myOptions = {
        zoom: 14,
        center: new google.maps.LatLng( 0.0, 0.0 ),
        mapTypeId: google.maps.MapTypeId.ROADMAP
    }
    map = new google.maps.Map( document.getElementById( "map_canvas" ),myOptions );
}
</script>

Like most things "it depends". It's not right or wrong/good or bad in and of itself to store data in columns or JSON. It depends on what you need to do with it later. What is your predicted way of accessing this data? Will you need to cross reference other data?

Other people have answered pretty well what the technical trade-off are.

Not many people have discussed that your app and features evolve over time and how this data storage decision impacts your team.

Because one of the temptations of using JSON is to avoid migrating schema and so if the team is not disciplined, it's very easy to stick yet another key/value pair into a JSON field. There's no migration for it, no one remembers what it's for. There is no validation on it.

My team used JSON along side traditional columns in postgres and at first it was the best thing since sliced bread. JSON was attractive and powerful, until one day we realized that flexibility came at a cost and it's suddenly a real pain point. Sometimes that point creeps up really quickly and then it becomes hard to change because we've built so many other things on top of this design decision.

Overtime, adding new features, having the data in JSON led to more complicated looking queries than what might have been added if we stuck to traditional columns. So then we started fishing certain key values back out into columns so that we could make joins and make comparisons between values. Bad idea. Now we had duplication. A new developer would come on board and be confused? Which is the value I should be saving back into? The JSON one or the column?

The JSON fields became junk drawers for little pieces of this and that. No data validation on the database level, no consistency or integrity between documents. That pushed all that responsibility into the app instead of getting hard type and constraint checking from traditional columns.

Looking back, JSON allowed us to iterate very quickly and get something out the door. It was great. However after we reached a certain team size it's flexibility also allowed us to hang ourselves with a long rope of technical debt which then slowed down subsequent feature evolution progress. Use with caution.

Think long and hard about what the nature of your data is. It's the foundation of your app. How will the data be used over time. And how is it likely TO CHANGE?

I'm not sure if you want to find duplicate files or just compare two single files. If the latter, the above approach (filecmp) is better, if the former, the following approach is better.

There are lots of duplicate files detection questions here. Assuming they are not very small and that performance is important, you can

• Compare file sizes first, discarding all which doesn't match
• If file sizes match, compare using the biggest hash you can handle, hashing chunks of files to avoid reading the whole big file

Here's is an answer with Python implementations (I prefer the one by nosklo, BTW)

Short answer: I think tgbaggio is right. You hit HDFS throughput limits on your executors.

I think the answer here may be a little simpler than some of the recommendations here.

The clue for me is in the cluster network graph. For run 1 the utilization is steady at ~50 M bytes/s. For run 3 the steady utilization is doubled, around 100 M bytes/s.

From the cloudera blog post shared by DzOrd, you can see this important quote:

I’ve noticed that the HDFS client has trouble with tons of concurrent threads. A rough guess is that at most five tasks per executor can achieve full write throughput, so it’s good to keep the number of cores per executor below that number.

So, let's do a few calculations see what performance we expect if that is true.

Run 1: 19 GB, 7 cores, 3 executors

• 3 executors x 7 threads = 21 threads
• with 7 cores per executor, we expect limited IO to HDFS (maxes out at ~5 cores)
• effective throughput ~= 3 executors x 5 threads = 15 threads

Run 3: 4 GB, 2 cores, 12 executors

• 2 executors x 12 threads = 24 threads
• 2 cores per executor, so hdfs throughput is ok
• effective throughput ~= 12 executors x 2 threads = 24 threads

If the job is 100% limited by concurrency (the number of threads). We would expect runtime to be perfectly inversely correlated with the number of threads.

ratio_num_threads = nthread_job1 / nthread_job3 = 15/24 = 0.625
inv_ratio_runtime = 1/(duration_job1 / duration_job3) = 1/(50/31) = 31/50 = 0.62

So ratio_num_threads ~= inv_ratio_runtime, and it looks like we are network limited.

This same effect explains the difference between Run 1 and Run 2.

Run 2: 19 GB, 4 cores, 3 executors

• 3 executors x 4 threads = 12 threads
• with 4 cores per executor, ok IO to HDFS
• effective throughput ~= 3 executors x 4 threads = 12 threads

Comparing the number of effective threads and the runtime:

ratio_num_threads = nthread_job2 / nthread_job1 = 12/15 = 0.8
inv_ratio_runtime = 1/(duration_job2 / duration_job1) = 1/(55/50) = 50/55 = 0.91

It's not as perfect as the last comparison, but we still see a similar drop in performance when we lose threads.

Now for the last bit: why is it the case that we get better performance with more threads, esp. more threads than the number of CPUs?

A good explanation of the difference between parallelism (what we get by dividing up data onto multiple CPUs) and concurrency (what we get when we use multiple threads to do work on a single CPU) is provided in this great post by Rob Pike: Concurrency is not parallelism.

The short explanation is that if a Spark job is interacting with a file system or network the CPU spends a lot of time waiting on communication with those interfaces and not spending a lot of time actually "doing work". By giving those CPUs more than 1 task to work on at a time, they are spending less time waiting and more time working, and you see better performance.

I had the same problem, Here is my code before modification :

package com.asagaama

import org.apache.spark.SparkContext
import org.apache.spark.SparkConf
import org.apache.spark.rdd.RDD

/**
  * Created by asagaama on 16/02/2017.
  */
object Word {

  def countWords(sc: SparkContext) = {
    // Load our input data
    val input = sc.textFile("/Users/Documents/spark/testscase/test/test.txt")
    // Split it up into words
    val words = input.flatMap(line => line.split(" "))
    // Transform into pairs and count
    val counts = words.map(word => (word, 1)).reduceByKey { case (x, y) => x + y }
    // Save the word count back out to a text file, causing evaluation.
    counts.saveAsTextFile("/Users/Documents/spark/testscase/test/result.txt")
  }

  def main(args: Array[String]) = {
    val conf = new SparkConf().setAppName("wordCount")
    val sc = new SparkContext(conf)
    countWords(sc)
  }

}

And after replacing :

val conf = new SparkConf().setAppName("wordCount")

With :

val conf = new SparkConf().setAppName("wordCount").setMaster("local[*]")

It worked fine !

You may be adding the onclick handler as inline markup:

<input id="addreport" type="button" value="Add New Report" onclick="openAdd()" />

If so, the jquery .off() or .unbind() won't work. You need to add the original event handler in jquery as well:

$("#addreport").on("click", "", function (e) {
   openAdd();
});

Then the jquery has a reference to the event handler and can remove it:

$("#addreport").off("click")

VoidKing mentions this a little more obliquely in a comment above.

Try this:

Dim s = "RAJAN"
Dim firstChar = s(0)

You can even do this:

Dim firstChar = "RAJAN"(0)

You need to call the

$.parseJSON();

For example:

...
success: function(data){
       var json = $.parseJSON(data); // create an object with the key of the array
       alert(json.html); // where html is the key of array that you want, $response['html'] = "<a>something..</a>";
    },
    error: function(data){
       var json = $.parseJSON(data);
       alert(json.error);
    } ...

see this in http://api.jquery.com/jQuery.parseJSON/

if you still have the problem of slashes: search for security.magicquotes.disabling.php or: function.stripslashes.php

Note:

This answer here is for those who try to use $.ajax with the dataType property set to json and even that got the wrong response type. Defining the header('Content-type: application/json'); in the server may correct the problem, but if you are returning text/html or any other type, the $.ajax method should convert it to json. I make a test with older versions of jQuery and only after version 1.4.4 the $.ajax force to convert any content-type to the dataType passed. So if you have this problem, try to update your jQuery version.

The following are other solutions offered elsewhere:

If on a Windows Host:

<?
    $f = 'f:/www/docs';
    $obj = new COM ( 'scripting.filesystemobject' );
    if ( is_object ( $obj ) )
    {
        $ref = $obj->getfolder ( $f );
        echo 'Directory: ' . $f . ' => Size: ' . $ref->size;
        $obj = null;
    }
    else
    {
        echo 'can not create object';
    }
?>

Else, if on a Linux Host:

<?
    $f = './path/directory';
    $io = popen ( '/usr/bin/du -sk ' . $f, 'r' );
    $size = fgets ( $io, 4096);
    $size = substr ( $size, 0, strpos ( $size, "\t" ) );
    pclose ( $io );
    echo 'Directory: ' . $f . ' => Size: ' . $size;
?>

$('#mainn').text(function (_,txt) {
    return txt.slice(0, -1);
});

demo --> http://jsfiddle.net/d72ML/8/

After reading your comment on my previous answer I thought I might put this as a separate answer.

Although I appreciate your approach of trying to do it manually to get a better grasp on jQuery I do still emphasise the merit in using existing frameworks.

That said, here is a solution. I've modified some of your css and and HTML just to make it easier for me to work with

WORKING JS FIDDLE - http://jsfiddle.net/HsEne/15/

This is the jQuery

$(document).ready(function(){
$('.sp').first().addClass('active');
$('.sp').hide();    
$('.active').show();

    $('#button-next').click(function(){

    $('.active').removeClass('active').addClass('oldActive');    
                   if ( $('.oldActive').is(':last-child')) {
        $('.sp').first().addClass('active');
        }
        else{
        $('.oldActive').next().addClass('active');
        }
    $('.oldActive').removeClass('oldActive');
    $('.sp').fadeOut();
    $('.active').fadeIn();


    });

       $('#button-previous').click(function(){
    $('.active').removeClass('active').addClass('oldActive');    
           if ( $('.oldActive').is(':first-child')) {
        $('.sp').last().addClass('active');
        }
           else{
    $('.oldActive').prev().addClass('active');
           }
    $('.oldActive').removeClass('oldActive');
    $('.sp').fadeOut();
    $('.active').fadeIn();
    });




});

So now the explanation.
Stage 1
1) Load the script on document ready.

2) Grab the first slide and add a class 'active' to it so we know which slide we are dealing with.

3) Hide all slides and show active slide. So now slide #1 is display block and all the rest are display:none;

Stage 2 Working with the button-next click event.
1) Remove the current active class from the slide that will be disappearing and give it the class oldActive so we know that it is on it's way out.

2) Next is an if statement to check if we are at the end of the slideshow and need to return to the start again. It checks if oldActive (i.e. the outgoing slide) is the last child. If it is, then go back to the first child and make it 'active'. If it's not the last child, then just grab the next element (using .next() ) and give it class active.

3) We remove the class oldActive because it's no longer needed.

4) fadeOut all of the slides

5) fade In the active slides

Step 3

Same as in step two but using some reverse logic for traversing through the elements backwards.

It's important to note there are thousands of ways you can achieve this. This is merely my take on the situation.

The reason behind this is that the pygame window operates at 60 fps (frames per second) and when you press the key for just like 1 sec it updates 60 frames as per the loop of the event block.

clock = pygame.time.Clock()
flag = true
while flag :
    clock.tick(60)

Note that if you have animation in your project then the number of images will define the number of values in tick(). Let's say you have a character and it requires 20 sets images for walking and jumping then you have to make tick(20) to move the character the right way.

You haven't actually asked a question, but assuming you have one, this could be your answer...

Assuming all characters, except the "Special Characters" are allowed you can write

String regex = "^[^<>'\"/;`%]*$";

Dont know whether I should put this as answer or not...

I used @Zeeshan0026's solution to draw the path...and the problem was that if I draw path once, and then I do try to draw path once again, both two paths show and this continues...paths showing even when markers were deleted... while, ideally, old paths' shouldn't be there once new path is drawn / markers are deleted..

going through some other question over SO, I had the following solution

I add the following function in Zeeshan's class

 public void clearRoute(){

         for(Polyline line1 : polylines)
         {
             line1.remove();
         }

         polylines.clear();

     }

in my map activity, before drawing the path, I called this function.. example usage as per my app is

private Route rt;

rt.clearRoute();

            if (src == null) {
                Toast.makeText(getApplicationContext(), "Please select your Source", Toast.LENGTH_LONG).show();
            }else if (Destination == null) {
                Toast.makeText(getApplicationContext(), "Please select your Destination", Toast.LENGTH_LONG).show();
            }else if (src.equals(Destination)) {
                Toast.makeText(getApplicationContext(), "Source and Destinatin can not be the same..", Toast.LENGTH_LONG).show();
            }else{

                rt.drawRoute(mMap, MapsMainActivity.this, src,
                        Destination, false, "en");
            }

you can use rt.clearRoute(); as per your requirements.. Hoping that it will save a few minutes of someone else and will help some beginner in solving this issue..

Complete Class Code

see on github

Edit: here is part of code from mainactivity..

case R.id.mkrbtn_set_dest:
                    Destination = selmarker.getPosition();
                    destmarker = selmarker;
                    desShape = createRouteCircle(Destination, false);

                    if (src == null) {
                        Toast.makeText(getApplicationContext(),
                                "Please select your Source first...",
                                Toast.LENGTH_LONG).show();
                    } else if (src.equals(Destination)) {
                        Toast.makeText(getApplicationContext(),
                                "Source and Destinatin can not be the same..",
                                Toast.LENGTH_LONG).show();
                    } else {

                        if (isNetworkAvailable()) {
                            rt.drawRoute(mMap, MapsMainActivity.this, src,
                                    Destination, false, "en");
                            src = null;
                            Destination = null;

                        } else {
                            Toast.makeText(
                                    getApplicationContext(),
                                    "Internet Connection seems to be OFFLINE...!",
                                    Toast.LENGTH_LONG).show();

                        }

                    }

                    break;

Edit 2 as per comments

usage :

//variables as data members
GoogleMap mMap;
private Route rt;
static LatLng src;
static LatLng Destination;
//MapsMainActivity is my activity
//false for interim stops for traffic, google
// en language for html description returned

rt.drawRoute(mMap, MapsMainActivity.this, src,
                            Destination, false, "en");

You can use read-excel-file npm.

In that, you can specify JSON Schema to convert XLSX into JSON Format.

const readXlsxFile = require('read-excel-file/node');

const schema = {
    'Segment': {
        prop: 'Segment',
        type: String
    },
    'Country': {
        prop: 'Country',
        type: String
    },
    'Product': {
        prop: 'Product',
        type: String
    }
}

readXlsxFile('sample.xlsx', { schema }).then(({ rows, errors }) => {
    console.log(rows);
});

For any javadoc (not just the ones available for download) you can use the DownThemAll addon for Firefox with a suitable renaming mask, for example:

*subdirs*/*name*.*ext*

https://addons.mozilla.org/en-us/firefox/addon/downthemall/

https://www.downthemall.org/main/install-it/downthemall-3-0-7/

Edit: It's possible to use some older versions of the DownThemAll add-on with Pale Moon browser.

It's easy to copy a folder in a batch file.

 @echo off
 set src_folder = c:\whatever\*.*
 set dst_folder = c:\foo
 xcopy /S/E/U %src_folder% %dst_folder%

And you can add that batch file to your Windows login script pretty easily (assuming you have admin rights on the machine). Just go to the "User Manager" control panel, choose properties for your user, choose profile and set a logon script.

How you get to the user manager control panel depends on which version of Windows you run. But right clicking on My Computer and choosing manage and then choosing Local users and groups works for most versions.

The only sticky bit is "when the folder is updated". This sounds like a folder watcher, which you can't do in a batch file, but you can do pretty easily with .NET.

For me, On Android 9 (API 28), disabling Google Play Protect from play store app worked the trick, and i was able to get rid of the App not Installed error.

To disable Google Play Protect. Open "Play Store" application => tap on Menu button => select "Play Protect" option => Disable the options "Scan device for security threats".

You don't need --header "Content-Length: $LENGTH".

curl --request POST --data-binary "@template_entry.xml" $URL

Note that GET request does not support content body widely.

Also remember that POST request have 2 different coding schema. This is first form:

  $ nc -l -p 6666 &
  $ curl  --request POST --data-binary "@README" http://localhost:6666

POST / HTTP/1.1
User-Agent: curl/7.21.0 (x86_64-pc-linux-gnu) libcurl/7.21.0 OpenSSL/0.9.8o zlib/1.2.3.4 libidn/1.15 libssh2/1.2.6
Host: localhost:6666
Accept: */*
Content-Length: 9309
Content-Type: application/x-www-form-urlencoded
Expect: 100-continue

.. -*- mode: rst; coding: cp1251; fill-column: 80 -*-
.. rst2html.py README README.html
.. contents::

You probably request this:

-F/--form name=content
           (HTTP) This lets curl emulate a filled-in form in
              which a user has pressed the submit button. This
              causes curl to POST data using the Content- Type
              multipart/form-data according to RFC2388. This
              enables uploading of binary files etc. To force the
              'content' part to be a file, prefix the file name
              with an @ sign. To just get the content part from a
              file, prefix the file name with the symbol <. The
              difference between @ and < is then that @ makes a
              file get attached in the post as a file upload,
              while the < makes a text field and just get the
              contents for that text field from a file.

The ol, ul lists will work if you want you can also use a table with border: none in the css.

For squashing two commits, one of which was already pushed, on a single branch the following worked:

git rebase -i HEAD~2
    [ pick     older-commit  ]
    [ squash   newest-commit ]
git push --force

By default, this will include the commit message of the newest commit as a comment on the older commit.

Bulk insert in Node.js can be done using the below code. I have referred lots of blog for getting this work.

please refer this link as well. https://www.technicalkeeda.com/nodejs-tutorials/insert-multiple-records-into-mysql-using-nodejs

The working code.

  const educations = request.body.educations;
  let queryParams = [];
  for (let i = 0; i < educations.length; i++) {
    const education = educations[i];
    const userId = education.user_id;
    const from = education.from;
    const to = education.to;
    const instituteName = education.institute_name;
    const city = education.city;
    const country = education.country;
    const certificateType = education.certificate_type;
    const studyField = education.study_field;
    const duration = education.duration;

    let param = [
      from,
      to,
      instituteName,
      city,
      country,
      certificateType,
      studyField,
      duration,
      userId,
    ];

    queryParams.push(param);
  }

  let sql =
    "insert into tbl_name (education_from, education_to, education_institute_name, education_city, education_country, education_certificate_type, education_study_field, education_duration, user_id) VALUES ?";
  let sqlQuery = dbManager.query(sql, [queryParams], function (
    err,
    results,
    fields
  ) {
    let res;
    if (err) {
      console.log(err);
      res = {
        success: false,
        message: "Insertion failed!",
      };
    } else {
      res = {
        success: true,
        id: results.insertId,
        message: "Successfully inserted",
      };
    }

    response.send(res);
  });

Hope this will help you.

async await is here (ES7), so you can do this kind of things very easily now.

  var i;
  var j = 10;
  for (i = 0; i < j; i++) {
    await asycronouseProcess();
    alert(i);
  }

Remember, this works only if asycronouseProcess is returning a Promise

If asycronouseProcess is not in your control then you can make it return a Promise by yourself like this

function asyncProcess() {
  return new Promise((resolve, reject) => {
    asycronouseProcess(()=>{
      resolve();
    })
  })
}

Then replace this line await asycronouseProcess(); by await asyncProcess();

Understanding Promises before even looking into async await is must (Also read about support for async await)

You are correct, no harm is done and it's faster to just exit

There are various reasons for this:

• All desktop and server environments simply release the entire memory space on exit(). They are unaware of program-internal data structures such as heaps.

• Almost all free() implementations do not ever return memory to the operating system anyway.

• More importantly, it's a waste of time when done right before exit(). At exit, memory pages and swap space are simply released. By contrast, a series of free() calls will burn CPU time and can result in disk paging operations, cache misses, and cache evictions.

Regarding the possiblility of future code reuse justifing the certainty of pointless ops: that's a consideration but it's arguably not the Agile way. YAGNI!

Both find() and children() methods are used to filter the child of the matched elements, except the former is travels any level down, the latter is travels a single level down.

To simplify:

1. find() – search through the matched elements’ child, grandchild, great-grandchild... all levels down.
2. children() – search through the matched elements’ child only (single level down).

To reset your keyring.

1. Go into your home folder.

2. Press ctrl & h to show your hidden folders.

3. Now look in your .gnome2/keyrings directory.

4. Find the default.keyring file.

5. Move that file to a different folder.

6. Once done, reboot your computer.

When you are trying to sign in to your Google Account from your new device or application you have to unlock the CAPTCHA. To unlock the CAPTCHA go to https://www.google.com/accounts/DisplayUnlockCaptcha and then

And also make sure to allow less secure apps on

A histogram is a poor-man's density estimate. Note that in your call to hist() using default arguments, you get frequencies not probabilities -- add ,prob=TRUE to the call if you want probabilities.

As for the log axis problem, don't use 'x' if you do not want the x-axis transformed:

plot(mydata_hist$count, log="y", type='h', lwd=10, lend=2)

gets you bars on a log-y scale -- the look-and-feel is still a little different but can probably be tweaked.

Lastly, you can also do hist(log(x), ...) to get a histogram of the log of your data.

When you use a string literal the string can be interned, but when you use new String("...") you get a new string object.

In this example both string literals refer the same object:

String a = "abc"; 
String b = "abc";
System.out.println(a == b);  // true

Here, 2 different objects are created and they have different references:

String c = new String("abc");
String d = new String("abc");
System.out.println(c == d);  // false

In general, you should use the string literal notation when possible. It is easier to read and it gives the compiler a chance to optimize your code.

You did a great job of summarizing what's awesome about Node.js. My feeling is that Node.js is especially suited for applications where you'd like to maintain a persistent connection from the browser back to the server. Using a technique known as "long-polling", you can write an application that sends updates to the user in real time. Doing long polling on many of the web's giants, like Ruby on Rails or Django, would create immense load on the server, because each active client eats up one server process. This situation amounts to a tarpit attack. When you use something like Node.js, the server has no need of maintaining separate threads for each open connection.

This means you can create a browser-based chat application in Node.js that takes almost no system resources to serve a great many clients. Any time you want to do this sort of long-polling, Node.js is a great option.

It's worth mentioning that Ruby and Python both have tools to do this sort of thing (eventmachine and twisted, respectively), but that Node.js does it exceptionally well, and from the ground up. JavaScript is exceptionally well situated to a callback-based concurrency model, and it excels here. Also, being able to serialize and deserialize with JSON native to both the client and the server is pretty nifty.

I look forward to reading other answers here, this is a fantastic question.

It's worth pointing out that Node.js is also great for situations in which you'll be reusing a lot of code across the client/server gap. The Meteor framework makes this really easy, and a lot of folks are suggesting this might be the future of web development. I can say from experience that it's a whole lot of fun to write code in Meteor, and a big part of this is spending less time thinking about how you're going to restructure your data, so the code that runs in the browser can easily manipulate it and pass it back.

Here's an article on Pyramid and long-polling, which turns out to be very easy to set up with a little help from gevent: TicTacToe and Long Polling with Pyramid.

Just for future reference, copying all these extension files to Windows/System or Windows/System32 is unnecessary.

All that is required is a copy of the php.ini file you edit in the PHP dir to copied to the root Windows dir.

phpinfo will clearly explain the below: Configuration File (php.ini) Path C:\Windows

Logical sense will explain that php wants to load a config located in the Windows dir. :-)

You can store the array's elements in a row or column as follows:

>>> a = np.array([1, 2, 3])[:, None] # stores in rows
>>> a
array([[1],
       [2],
       [3]])

>>> b = np.array([1, 2, 3])[None, :] # stores in columns
>>> b
array([[1, 2, 3]])

I use the ffmpeg-python binding. You can find more information here.

import ffmpeg
(
    ffmpeg
    .input('/path/to/jpegs/*.jpg', pattern_type='glob', framerate=25)
    .output('movie.mp4')
    .run()
)

select distinct title, (
               select count(title) 
               from kmovies as sub 
               where sub.title=kmovies.title) as cnt 
from kmovies 
group by title 
order by cnt desc

Try this plugin JQuery UI Message box. He uses jQuery UI Dialog.

A functional approach:

a = [1,"A", 34, -123, "Hello", 12]
b = [0, 2, 5]

from operator import itemgetter

print(list(itemgetter(*b)(a)))
[1, 34, 12]

hope this may help you:

SELECT  CAST(LoginTime AS DATE)
         FROM    AuditTrail 

If you want to have some filters over this datetime or it's different parts, you can use built-in functions such as Year and Month

many answers are weird and don't really give result in milliseconds (but in seconds or anything else):

here what I use to get MS (MILLISECONDS):

Swift:

let startTime = NSDate().timeIntervalSince1970 * 1000

// your Swift code

let endTimeMinusStartTime = NSDate().timeIntervalSince1970 * 1000 - startTime
print("time code execution \(endTimeMinStartTime) ms")

Objective-C:

double startTime = [[NSDate date] timeIntervalSince1970] * 1000.0;

// your Objective-C code

double endTimeMinusStartTime = [[NSDate date] timeIntervalSince1970] * 1000.0 - startTime;
printf("time code execution %f ms\n", endTimeMinusStartTime );

REST vs. SOAP Web Services

I am seeing a lot of new web services are implemented using a REST style architecture these days rather than a SOAP one. Lets step back a second and explain what REST is.

What is a REST web service?

The acronym REST stands for representational state transfer, and this basically means that each unique URL is a representation of some object. You can get the contents of that object using an HTTP GET, to delete it, you then might use a POST, PUT, or DELETE to modify the object (in practice most of the services use a POST for this).

Who's using REST?

All of Yahoo's web services use REST, including Flickr and Delicious.

APIs use it, pubsub, bloglines, Technorati, and both eBay, and Amazon have web services for both REST and SOAP.

Who's using SOAP?

Google seams to be consistent in implementing their web services to use SOAP, with the exception of Blogger, which uses XML-RPC. You will find SOAP web services in lots of enterprise software as well.

REST vs. SOAP

As you may have noticed the companies I mentioned that are using REST APIs haven't been around for very long, and their APIs came out this year mostly. So REST is definitely the trendy way to create a web service, if creating web services could ever be trendy (lets face it you use soap to wash, and you rest when your tired). The main advantages of REST web services are:

• Lightweight - not a lot of extra XML markup Human Readable Results

• Easy to build - no toolkits required. SOAP also has some advantages:

Easy to consume - sometimes Rigid - type checking, adheres to a contract Development tools For consuming web services, its sometimes a toss up between which is easier. For instance Google's AdWords web service is really hard to consume (in ColdFusion anyway), it uses SOAP headers, and a number of other things that make it kind of difficult. On the converse, Amazon's REST web service can sometimes be tricky to parse because it can be highly nested, and the result schema can vary quite a bit based on what you search for.

Whichever architecture you choose make sure its easy for developers to access it, and well documented.

Freitag, P. (2005). "REST vs SOAP Web Services". Retrieved from http://www.petefreitag.com/item/431.cfm on June 13, 2010

You can use {} arround your variable, to separate it from what's after:

echo "{$test}y"

As reference, you can take a look to the Variable parsing - Complex (curly) syntax section of the PHP manual.

What I like to do is completely remove the control using Angular2 then it's reloaded when the next song has an audio path:

<audio id="audioplayer" *ngIf="song?.audio_path">

Then when I want to unload it in code I do this:

this.song = Object.assign({},this.song,{audio_path: null});

When the next song is assigned, the control gets completely recreated from scratch:

this.song = this.songOnDeck;

if you want to route to another page this.$router.push({path: '/pagename'})

if you want to route with params this.$router.push({path: '/pagename', param: {param1: 'value1', param2: value2})

Another option is to use uniqueResultOptional() method, which gives you Optional in result:

String hql="from DrawUnusedBalance where unusedBalanceDate= :today";
Query query=em.createQuery(hql);
query.setParameter("today",new LocalDate());

Optional<DrawUnusedBalance> drawUnusedBalance=query.uniqueResultOptional();

You need to be in the directory of the file and then type the following into the terminal

git checkout -- <file>

We had a very similar issue whereby a client's website was trying to connect to our Web API service and getting that same message. This started happening completely out of the blue when there had been no code changes or Windows updates on the server where IIS was running.

In our case it turned out that the calling website was using a version of .Net that only supported TLS 1.0 and for some reason the server where our IIS was running stopped appeared to have stopped accepting TLS 1.0 calls. To diagnose that we had to explicitly enable TLS via the registry on the IIS's server and then restart that server. These are the reg keys:

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS
    1.0\Client] "DisabledByDefault"=dword:00000000 "Enabled"=dword:00000001

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS
    1.0\Server] "DisabledByDefault"=dword:00000000 "Enabled"=dword:00000001

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS
    1.1\Client] "DisabledByDefault"=dword:00000000 "Enabled"=dword:00000001

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS
    1.1\Server] "DisabledByDefault"=dword:00000000 "Enabled"=dword:00000001

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS
    1.2\Client] "DisabledByDefault"=dword:00000000 "Enabled"=dword:00000001

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS
    1.2\Server] "DisabledByDefault"=dword:00000000 "Enabled"=dword:00000001

If that doesn't do it, you could also experiment with adding the entry for SSL 2.0:


    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 2.0\Client]
    "DisabledByDefault"=dword:00000000
    "Enabled"=dword:00000001

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 2.0\Server]
    "DisabledByDefault"=dword:00000000
    "Enabled"=dword:00000001

My answer to another question here has this powershell script that we used to add the entries:

NOTE: Enabling old security protocols is not a good idea, the right answer in our case was to get the client website to update it's code to use TLS 1.2, but the registry entries above can help diagnose the issue in the first place.

This answer attempts to address inputs with an absolute value in the range of 2147483648₁₀ (2³¹) – 9007199254740991₁₀ (2⁵³-1).

In JavaScript, numbers are stored in 64-bit floating point representation, but bitwise operations coerce them to 32-bit integers in two's complement format, so any approach which uses bitwise operations restricts the range of output to -2147483648₁₀ (-2³¹) – 2147483647₁₀ (2³¹-1).

However, if bitwise operations are avoided and the 64-bit floating point representation is preserved by using only mathematical operations, we can reliably convert any safe integer to 64-bit two's complement binary notation by sign-extending the 53-bit twosComplement:

function toBinary (value) {
  if (!Number.isSafeInteger(value)) {
    throw new TypeError('value must be a safe integer');
  }

  const negative = value < 0;
  const twosComplement = negative ? Number.MAX_SAFE_INTEGER + value + 1 : value;
  const signExtend = negative ? '1' : '0';

  return twosComplement.toString(2).padStart(53, '0').padStart(64, signExtend);
}

function format (value) {
  console.log(value.toString().padStart(64));
  console.log(value.toString(2).padStart(64));
  console.log(toBinary(value));
}

format(8);
format(-8);
format(2**33-1);
format(-(2**33-1));
format(2**53-1);
format(-(2**53-1));
format(2**52);
format(-(2**52));
format(2**52+1);
format(-(2**52+1));

.as-console-wrapper{max-height:100%!important}

For older browsers, polyfills exist for the following functions and values:

• Number.isSafeInteger()
• Number.isInteger()
• Number.MAX_SAFE_INTEGER
• String.prototype.padStart()

As an added bonus, you can support any radix (2–36) if you perform the two's complement conversion for negative numbers in ?64 / log₂(radix)? digits by using BigInt:

function toRadix (value, radix) {
  if (!Number.isSafeInteger(value)) {
    throw new TypeError('value must be a safe integer');
  }

  const digits = Math.ceil(64 / Math.log2(radix));
  const twosComplement = value < 0
    ? BigInt(radix) ** BigInt(digits) + BigInt(value)
    : value;

  return twosComplement.toString(radix).padStart(digits, '0');
}

console.log(toRadix(0xcba9876543210, 2));
console.log(toRadix(-0xcba9876543210, 2));
console.log(toRadix(0xcba9876543210, 16));
console.log(toRadix(-0xcba9876543210, 16));
console.log(toRadix(0x1032547698bac, 2));
console.log(toRadix(-0x1032547698bac, 2));
console.log(toRadix(0x1032547698bac, 16));
console.log(toRadix(-0x1032547698bac, 16));

.as-console-wrapper{max-height:100%!important}

If you are interested in my old answer that used an ArrayBuffer to create a union between a Float64Array and a Uint16Array, please refer to this answer's revision history.

As mentioned in comments above, the general case is a pain. It is fairly easy if all items are hashable or all items are sortable. However I have recently had to try solve the general case. Here is my solution. I realised after posting that this is a duplicate to a solution above that I missed on the first pass. Anyway, if you use slices rather than list.remove() you can compare immutable sequences.

def sequences_contain_same_items(a, b):
    for item in a:
        try:
            i = b.index(item)
        except ValueError:
            return False
        b = b[:i] + b[i+1:]
    return not b

For those looking for answers for SQL Server 2016+. Use the built-in STRING_SPLIT function

Eg:

DECLARE @tags NVARCHAR(400) = 'clothing,road,,touring,bike'  

SELECT value  
FROM STRING_SPLIT(@tags, ',')  
WHERE RTRIM(value) <> '';  

Reference: https://msdn.microsoft.com/en-nz/library/mt684588.aspx

If you want to run a specific migration, do

$ rake db:migrate:up VERSION=20080906120000

If you want to run migrations multiple times, do

# use the STEP parameter if you need to go more than one version back
$ rake db:migrate:redo STEP=3

If you want to run a single migration multiple times, do

# this is super useful
$ rake db:migrate:redo VERSION=20080906120000

(you can find the version number in the filename of your migration)

Edit: You can also simply rename your migration file, Eg:

20151013131830_my_migration.rb -> 20151013131831_my_migration.rb

Then migrate normally, this will treat the migration as a new one (usefull if you want to migrate on a remote environment (such as staging) on which you have less control.

Edit 2: You can also just nuke the migration entry in the database. Eg:

rails_c> q = "delete from schema_migrations where version = '20151013131830'"
rails_c> ActiveRecord::Base.connection.execute(q)

rake db:migrate will then rerun the up method of the nuked migrations.

Use

var jsDate = $('#your_datepicker_id').datepicker('getDate');
if (jsDate !== null) { // if any date selected in datepicker
    jsDate instanceof Date; // -> true
    jsDate.getDate();
    jsDate.getMonth();
    jsDate.getFullYear();
}

As Darren commented, Apache don't understand php.ini relative paths in Windows.

To fix it, change the relative paths in your php.ini to absolute paths.

extension_dir="C:\full\path\to\php\ext\dir"

Simply add these to your ggplot:

+ scale_x_continuous(expand = c(0, 0), limits = c(0, NA)) + 
  scale_y_continuous(expand = c(0, 0), limits = c(0, NA))

Example

df <- data.frame(x = 1:5, y = 1:5)
p <- ggplot(df, aes(x, y)) + geom_point()
p <- p + expand_limits(x = 0, y = 0)
p # not what you are looking for


p + scale_x_continuous(expand = c(0, 0), limits = c(0,NA)) + 
  scale_y_continuous(expand = c(0, 0), limits = c(0, NA))

Lastly, take great care not to unintentionally exclude data off your chart. For example, a position = 'dodge' could cause a bar to get left off the chart entirely (e.g. if its value is zero and you start the axis at zero), so you may not see it and may not even know it's there. I recommend plotting data in full first, inspect, then use the above tip to improve the plot's aesthetics.

You may have inadvertently used a private key for a public key.

My simple solution:

npm install --save-dev babel-plugin-transform-runtime
npm install --save-dev babel-plugin-transform-async-to-generator

.babelrc

{
  "presets": [
    ["latest", {
      "es2015": {
        "loose": true
      }
    }],
    "react",
    "stage-0"
  ],
  "plugins": [
    "transform-runtime",
    "transform-async-to-generator"
  ]
}

A covered query is a query where all the columns in the query's result set are pulled from non-clustered indexes.

A query is made into a covered query by the judicious arrangement of indexes.

A covered query is often more performant than a non-covered query in part because non-clustered indexes have more rows per page than clustered indexes or heap indexes, so fewer pages need to be brought into memory in order to satisfy the query. They have more rows per page because only part of the table row is part of the index row.

A covering index is an index which is used in a covered query. There is no such thing as an index which, in and of itself, is a covering index. An index may be a covering index with respect to query A, while at the same time not being a covering index with respect to query B.

var str = 'hol';
var data = 'hola mundo';
if (data.length >= str.length && data.substring(0, str.length) == str)
    return true;
else
    return false;

I have a blog and I had a lot of trouble finding out how to resize my embedded gist. Post manager only allows you to write text, place images and embed HTML code. Blog layout is responsive itself. It's built with Wix. However, embedded HTML is not. I read a lot about how it's impossible to resize components inside body of generated iFrames. So, here is my suggestion:

If you only have one component inside your iFrame, i.e. your gist, you can resize only the gist. Forget about the iFrame.

I had problems with viewport, specific layouts to different user agents and this is what solved my problem:

<script language="javascript" type="text/javascript" src="https://gist.github.com/roliveiravictor/447f994a82238247f83919e75e391c6f.js"></script>

<script language="javascript" type="text/javascript">

function windowSize() {
  let gist = document.querySelector('#gist92442763');

  let isMobile = {
    Android: function() {
        return /Android/i.test(navigator.userAgent)
    },
    BlackBerry: function() {
        return /BlackBerry/i.test(navigator.userAgent)
    },
    iOS: function() {
        return /iPhone|iPod/i.test(navigator.userAgent)
    },
    Opera: function() {
        return /Opera Mini/i.test(navigator.userAgent)
    },
    Windows: function() {
        return /IEMobile/i.test(navigator.userAgent) || /WPDesktop/i.test(navigator.userAgent)
    },
    any: function() {
        return (isMobile.Android() || isMobile.BlackBerry() || isMobile.iOS() || isMobile.Opera() || isMobile.Windows());
    }
};

  if(isMobile.any()) {
    gist.style.width = "36%";
    gist.style.WebkitOverflowScrolling = "touch"
    gist.style.position = "absolute"
  } else {
    gist.style.width = "auto !important";
  }
}

windowSize();

window.addEventListener('onresize', function() {
    windowSize();
});

</script>

<style type="text/css">

.gist-data {
  max-height: 300px;
}

.gist-meta {
  display: none;
}

</style>

The logic is to set gist (or your component) css based on user agent. Make sure to identify your component first, before applying to query selector. Feel free to take a look how responsiveness is working.

Just use the interface provided by MySql's GUI Tool (SQLyog):

Click on User manager:

Now, if you want to grant access FOR ANY OTHER REMOTE PC, just make sure that, just like in the underneath picture, the Host field value is % (which is the wildcard)

It's not really a performance question at all, since arrays and objects work very differently (or are supposed to, at least). Arrays have a continuous index 0..n, while objects map arbitrary keys to arbitrary values. If you want to supply specific keys, the only choice is an object. If you don't care about the keys, an array it is.

If you try to set arbitrary (numeric) keys on an array, you really have a performance loss, since behaviourally the array will fill in all indexes in-between:

> foo = [];
  []
> foo[100] = 'a';
  "a"
> foo
  [undefined, undefined, undefined, ..., "a"]

_{(Note that the array does not actually contain 99 undefined values, but it will behave this way since you're [supposed to be] iterating the array at some point.)}

The literals for both options should make it very clear how they can be used:

var arr = ['foo', 'bar', 'baz'];     // no keys, not even the option for it
var obj = { foo : 'bar', baz : 42 }; // associative by its very nature

It's a SQL Compact database. You need to define what you mean by "Open". You can open it via code with the SqlCeConnection so you can write your own tool/app to access it.

Visual Studio can also open the files directly if was created with the right version of SQL Compact.

There are also some third-party tools for manipulating them.

Jon Tan has done this with his site - http://jontangerine.com/ Everything including images has been declared in ems. Everything. This is how the desired effect is achieved. Text zoom and screen zoom yield almost the exact same result.

function SaveBlobAs(blob, file_name) {
    if (typeof navigator.msSaveBlob == "function")
        return navigator.msSaveBlob(blob, file_name);

    var saver = document.createElementNS("http://www.w3.org/1999/xhtml", "a");
    var blobURL = saver.href = URL.createObjectURL(blob), 
        body = document.body;

    saver.download = file_name;

    body.appendChild(saver);
    saver.dispatchEvent(new MouseEvent("click"));
    body.removeChild(saver);
    URL.revokeObjectURL(blobURL);
}

std::string str(buffer, buffer + length);

Or, if the string already exists:

str.assign(buffer, buffer + length);

Edit: I'm still not completely sure I understand the question. But if it's something like what JoshG is suggesting, that you want up to length characters, or until a null terminator, whichever comes first, then you can use this:

std::string str(buffer, std::find(buffer, buffer + length, '\0'));

Here is a code, which makes the same, but with response headers:

import socket
def patch_requests():
    old_readline = socket._fileobject.readline
    if not hasattr(old_readline, 'patched'):
        def new_readline(self, size=-1):
            res = old_readline(self, size)
            print res,
            return res
        new_readline.patched = True
        socket._fileobject.readline = new_readline
patch_requests()

I spent a lot of time searching for this, so I'm leaving it here, if someone needs.

To simply combine them you can place them all together like this:

=SUBSTITUTE(SUBSTITUTE(SUBSTITUTE(SUBSTITUTE(SUBSTITUTE(SUBSTITUTE(SUBSTITUTE(A2,"_AB","_"),"_CD","_"),"_EF","_"),"_40K",""),"_60K",""),"_S_","_"),"_","-")

(note that this may pass the older Excel limit of 7 nested statements. I'm testing in Excel 2010

Another way to do it is by utilizing Left and Right functions.

This assumes that the changing data on the end is always present and is 8 characters long

=SUBSTITUTE(LEFT(A2,LEN(A2)-8),"_","-")

This will achieve the same resulting string

If the string doesn't always end with 8 characters that you want to strip off you can search for the "_S" and get the current location. Try this:

=SUBSTITUTE(LEFT(A2,FIND("_S",A2,1)),"_","-")

Perhaps you try to reset your intellisense cache. I've had a similar issue in visual studio 2012 when working in a large project with many partial class definitions. Reducing the partials solved the problem partially, clearing the intellisense cache also - for a while.

Answer for MYSQL USERS:

ALTER TABLE ChildTableName 
DROP FOREIGN KEY `fk_table`;
ALTER TABLE ChildTableName 
ADD CONSTRAINT `fk_t1_t2_tt`
  FOREIGN KEY (`parentTable`)
  REFERENCES parentTable (`columnName`)
  ON DELETE CASCADE
  ON UPDATE CASCADE;

Cast the operands to floats:

float ans = (float)a / (float)b;

data.userID = "10";

If you just want to throw the contents of the file onto the screen you can try using PHP.

<?php
    $myfilename = "mytextfile.txt";
    if(file_exists($myfilename)){
      echo file_get_contents($myfilename);
    }
?>

Instead of using the placeholder text, you'll want to set the actual text property of the field to MM/YYYY, set the delegate of the text field and listen for this method:

- (BOOL)textField:(UITextField *)textField shouldChangeCharactersInRange:(NSRange)range replacementString:(NSString *)string {     // update the text of the label } 

Inside that method, you can figure out what the user has typed as they type, which will allow you to update the label accordingly.

Use simple FileStream.Read then print it with Convert.ToString(b, 2)

Remember also CHOWN or chgrp your website folder. Try myusername# chown -R myusername:_www uploads

You can't forward-declare a function in Python. If you have logic executing before you've defined functions, you've probably got a problem anyways. Put your action in an if __name__ == '__main__' at the end of your script (by executing a function you name "main" if it's non-trivial) and your code will be more modular and you'll be able to use it as a module if you ever need to.

Also, replace that list comprehension with a generator express (i.e., print "\n".join(str(bla) for bla in sorted(mylist, cmp=cmp_configs)))

Also, don't use cmp, which is deprecated. Use key and provide a less-than function.

According to the state machine diagram on the JSON website, only escaped double-quote characters are allowed, not single-quotes. Single quote characters do not need to be escaped:

Update - More information for those that are interested:

Douglas Crockford does not specifically say why the JSON specification does not allow escaped single quotes within strings. However, during his discussion of JSON in Appendix E of JavaScript: The Good Parts, he writes:

JSON's design goals were to be minimal, portable, textual, and a subset of JavaScript. The less we need to agree on in order to interoperate, the more easily we can interoperate.

So perhaps he decided to only allow strings to be defined using double-quotes since this is one less rule that all JSON implementations must agree on. As a result, it is impossible for a single quote character within a string to accidentally terminate the string, because by definition a string can only be terminated by a double-quote character. Hence there is no need to allow escaping of a single quote character in the formal specification.

The texts produced by the toString methods strictly conform to the JSON syntax rules. The constructors are more forgiving in the texts they will accept:

...

• Strings may be quoted with ' (single quote).

This is confirmed by the JSONTokener source code. The nextString method accepts escaped single quote characters and treats them just like double-quote characters:

public String nextString(char quote) throws JSONException {
    char c;
    StringBuffer sb = new StringBuffer();
    for (;;) {
        c = next();
        switch (c) {

        ...

        case '\\':
            c = this.next();
            switch (c) {

            ...

            case '"':
            case '\'':
            case '\\':
            case '/':
                sb.append(c);
                break;
        ...

At the top of the method is an informative comment:

The formal JSON format does not allow strings in single quotes, but an implementation is allowed to accept them.

So some implementations will accept single quotes - but you should not rely on this. Many popular implementations are quite restrictive in this regard and will reject JSON that contains single quoted strings and/or escaped single quotes.

Finally to tie this back to the original question, jQuery.parseJSON first attempts to use the browser's native JSON parser or a loaded library such as json2.js where applicable (which on a side note is the library the jQuery logic is based on if JSON is not defined). Thus jQuery can only be as permissive as that underlying implementation:

parseJSON: function( data ) {
    ...

    // Attempt to parse using the native JSON parser first
    if ( window.JSON && window.JSON.parse ) {
        return window.JSON.parse( data );
    }

    ...

    jQuery.error( "Invalid JSON: " + data );
},

As far as I know these implementations only adhere to the official JSON specification and do not accept single quotes, hence neither does jQuery.

I had the same problem. In my /etc/mysql/my.cnf was no path more to mysqld.sock defined. So I started a search to find it with: find / -type s | grep mysqld.sock but it could not be found. I reinstalled mysql with: apt install mysql-server-5.7 (please check before execute the current sql-server-version).

This solved my problem.

Take a look on a free tool - Valentina Studio. Amazing product! IMO this is the best manager for SQLite for all platforms:

• http://www.valentina-db.com/en/valentina-studio-overview

Also it works on Mac OS X, you can install Valentina Studio (FREE) directly from Mac App Store:

• https://itunes.apple.com/us/app/valentina-studio/id604825918?ls=1&mt=12

You may try to define the following variable:

CWD="$(cd -P -- "$(dirname -- "${BASH_SOURCE[0]}")" && pwd -P)"

Or you can try the following function in Bash:

realpath () {
  [[ $1 = /* ]] && echo "$1" || echo "$PWD/${1#./}"
}

^{This function takes one argument. If the argument already has an absolute path, print it as it is, otherwise print $PWD variable + filename argument (without ./ prefix).}

Related:

• Bash script absolute path with OS X

• Get the source directory of a Bash script from within the script itself

You are correct that ** is the power function.

^ is bitwise XOR.

% is indeed the modulus operation, but note that for positive numbers, x % m = x whenever m > x. This follows from the definition of modulus. (Additionally, Python specifies x % m to have the sign of m.)

// is a division operation that returns an integer by discarding the remainder. This is the standard form of division using the / in most programming languages. However, Python 3 changed the behavior of / to perform floating-point division even if the arguments are integers. The // operator was introduced in Python 2.6 and Python 3 to provide an integer-division operator that would behave consistently between Python 2 and Python 3. This means:

| context                                | `/` behavior   | `//` behavior |
---------------------------------------------------------------------------
| floating-point arguments, Python 2 & 3 | float division | int divison   |
---------------------------------------------------------------------------
| integer arguments, python 2            | int division   | int division  |
---------------------------------------------------------------------------
| integer arguments, python 3            | float division | int division  |

For more details, see this question: Division in Python 2.7. and 3.3

You can use this code block for JFrame background color.

    JFrame frame = new JFrame("Frame BG color");
    frame.setLayout(null);
    
    frame.setSize(1000, 650);
    frame.getContentPane().setBackground(new Color(5, 65, 90));
    frame.setLocationRelativeTo(null);
    frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    frame.setResizable(false);
    frame.setVisible(true);

Not sure if this is the answer you were looking for, but it worked for me. After spinning my wheels in Windows Firewall, I went back into SQL Server Configuration Manager, checked SQL Server Network Configuration, in the protocols for the instance I was working with look at TCP/IP. By default it seems mine was set to disabled, which allowed for instance connections on the local machine but not using SSMS on another machine. Enabling TCP/IP did the trick for me.

http://technet.microsoft.com/en-us/library/hh231672.aspx

Maybe you are already using the system proxy setting - in this case unset all git proxies will work:

git config --global --unset http.proxy
git config --global --unset https.proxy

Whatever way you try above you need to test it by upload it to app connect like me to make sure it works and save your valuable time

Use System.currentTimeMillis() or System.nanoTime().

You're right that the SD Card directory is /sdcard but you shouldn't be hard coding it. Instead, make a call to Environment.getExternalStorageDirectory() to get the directory:

File sdDir = Environment.getExternalStorageDirectory();

If you haven't done so already, you will need to give your app the correct permission to write to the SD Card by adding the line below to your Manifest:

<uses-permission android:name="android.permission.WRITE_EXTERNAL_STORAGE" />

Another method (mentioned in this SO answer) will keep the history in the terminal and give you a very deep track record of the file itself:

git log --follow -p -- file

This will show the entire history of the file (including history beyond renames and with diffs for each change).

In other words, if the file named bar was once named foo, then git log -p bar (without the --follow option) will only show the file's history up to the point where it was renamed -- it won't show the file's history when it was known as foo. Using git log --follow -p bar will show the file's entire history, including any changes to the file when it was known as foo.

This code worked for me. Easy fix but probably not a preferred way.

public void onClick (View v) {
    createdDialog(0).show(); // Instead of showDialog(0);
}

protected Dialog createdDialog(int id) {
    // Your code
}

Good evening,

The previous clues to get SQLManagementStudio_x64_ENU.exe runing didn't work as stated for me. After a while of searching, trying, retrying again and again, I finally figured it out. When executing SQLManagementStudio_x64_ENU.exe on my Windows seven system, I kept runing into compatibility issues. The trick is to run SQLManagementStudio_x64_ENU.exe in compatibility mode with Windows XP SP2. Edit the installer properties and enable compatibility mode with XP (service pack 2), then you'll be able to access Mr Doug (answered Mar 4 at 15:09) resolution.

Cheers.

If you have the following:

public class A
{
}

public class B extends A
{
}

then B is a subclass of A, B inherits from A. The opposite would be superclass.

In the newer version of pandas, use:

pd.set_option('display.max_colwidth', None)

I think this should be a comment or an edit to ThinkingMedia's answer on this very question (Check free disk space for current partition in bash), but I am not allowed to comment (not enough rep) and my edit has been rejected (reason: "this should be a comment or an answer"). So please, powers of the SO universe, don't damn me for repeating and fixing someone else's "answer". But someone on the internet was wrong!™ and they wouldn't let me fix it.

The code

  df --output=avail -h "$PWD" | sed '1d;s/[^0-9]//g'

has a substantial flaw: Yes, it will output 50G free as 50 -- but it will also output 5.0M free as 50 or 3.4G free as 34 or 15K free as 15.

To create a script with the purpose of checking for a certain amount of free disk space you have to know the unit you're checking against. Remove it (as sed does in the example above) the numbers don't make sense anymore.

If you actually want it to work, you will have to do something like:

FREE=`df -k --output=avail "$PWD" | tail -n1`   # df -k not df -h
if [[ $FREE -lt 10485760 ]]; then               # 10G = 10*1024*1024k
     # less than 10GBs free!
fi;

Also for an installer to df -k $INSTALL_TARGET_DIRECTORY might make more sense than df -k "$PWD". Finally, please note that the --output flag is not available in every version of df / linux.

you can use this query

SELECT *
FROM INFORMATION_SCHEMA.COLUMNS
WHERE COLUMN_NAME like N'%[ColumnName]%' and TABLE_NAME = N'[TableName]'

I have great news: this will be in Compose 1.3!

I'm using it in the current RC (RC1) like this:

rng:
  build: rng
  extra_hosts:
    seed: 1.2.3.4
    tree: 4.3.2.1

My understanding of marshalling is different to the other answers.

Serialization:

To Produce or rehydrate a wire-format version of an object graph utilizing a convention.

Marshalling:

To Produce or rehydrate a wire-format version of an object graph by utilizing a mapping file, so that the results can be customized. The tool may start by adhering to a convention, but the important difference is the ability to customize results.

Contract First Development:

Marshalling is important within the context of contract first development.

• Its possible to make changes to an internal object graph, while keeping the external interface stable over time. This way all of the service subscribers won't have to be modified for every trivial change.
• Its possible to map the results across different languages. For example from the property name convention of one language ('property_name') to another ('propertyName').

Configure your package.json file

"test": "jest --coverage",

Now run:

yarn test

All the test will start running and you will get the report.

Before document/window ready add "extend" to jQuery :

$.extend(
{
    redirectPost: function(location, args)
    {
        var form = '';
        $.each( args, function( key, value ) {

            form += '<input type="hidden" name="'+value.name+'" value="'+value.value+'">';
            form += '<input type="hidden" name="'+key+'" value="'+value.value+'">';
        });
        $('<form action="'+location+'" method="POST">'+form+'</form>').submit();
    }
});

Use :

$.redirectPost("someurl.com", $("#SomeForm").serializeArray());

Note : this method cant post files .

SET foreign_key_checks = 0; DELETE FROM yourtable; SET foreign_key_checks = 1;

using (var context = new DataDb())
{
     var ctx = ((System.Data.Entity.Infrastructure.IObjectContextAdapter)context).ObjectContext;
     ctx.ExecuteStoreCommand("DELETE FROM [TableName] WHERE Name= {0}", Name);
}

or

using (var context = new DataDb())
{
     context.Database.ExecuteSqlCommand("TRUNCATE TABLE [TableName]");
}

Disclaimer: This is just a copy of a comment by bobbaluba made more visible for future visitors. It helped me more than any other answer.

You have to drop the ssh:// prefix when using git clone as an example

git clone [email protected]:owner/repo.git

If you implement explicitly, you will only be able to reference the interface members through a reference that is of the type of the interface. A reference that is the type of the implementing class will not expose those interface members.

If your implementing class is not public, except for the method used to create the class (which could be a factory or IoC container), and except for the interface methods (of course), then I don't see any advantage to explicitly implementing interfaces.

Otherwise, explicitly implementing interfaces makes sure that references to your concrete implementing class are not used, allowing you to change that implementation at a later time. "Makes sure", I suppose, is the "advantage". A well-factored implementation can accomplish this without explicit implementation.

The disadvantage, in my opinion, is that you will find yourself casting types to/from the interface in the implementation code that does have access to non-public members.

Like many things, the advantage is the disadvantage (and vice-versa). Explicitly implementing interfaces will ensure that your concrete class implementation code is not exposed.

imp system/system-password@SID file=directory-you-selected\FILE.dmp log=log-dir\oracle_load.log fromuser=infodba touser=infodba commit=Y

use this.getClass().getName() to get packageName.className and use this.getClass().getSimpleName() to get only class name

You can use the init files. Check the MySQL official documentation on How to Reset the Root Password (including comments for alternative solutions).

So basically using init files, you can add any SQL queries that you need for fixing your access (such as GRAND, CREATE, FLUSH PRIVILEGES, etc.) into init file (any file).

Here is my example of recovering root account:

echo "CREATE USER 'root'@'localhost' IDENTIFIED BY 'root';" > your_init_file.sql
echo "GRANT ALL PRIVILEGES ON *.* TO 'root'@'localhost' WITH GRANT OPTION;" >> your_init_file.sql 
echo "FLUSH PRIVILEGES;" >> your_init_file.sql

and after you've created your file, you can run:

killall mysqld
mysqld_safe --init-file=$PWD/your_init_file.sql

then to check if this worked, press Ctrl+Z and type: bg to run the process from the foreground into the background, then verify your access by:

mysql -u root -proot
mysql> show grants;
+-------------------------------------------------------------------------------------------------------------+
| Grants for root@localhost                                                                                   |
+-------------------------------------------------------------------------------------------------------------+
| GRANT USAGE ON *.* TO 'root'@'localhost' IDENTIFIED BY PASSWORD '*81F5E21E35407D884A6CD4A731AEBFB6AF209E1B' |

See also:

• No Password – No Problem at Everything MySQL
• Bug #28331: Unclear error message when CREATE USER fails due to duplicate key

You need to use the group(int) of your matcher - group(0) is the entire match, and group(1) is the first group you marked. In the example you specify, group(1) is what comes after "sentence".

If you want use RegEx in .NET,

Regex rx = new Regex(@"^([\w]+)(\-)*");
var match = rx.Match("thisis-thefirst");
var text = match.Groups[1].Value;
Assert.AreEqual("thisis", text);

I believe this is the most simple in all aspects unless you call the validate function be other means. With no/null/empty value to your first option is easier to validate. You could also eliminate the first option and start with the most popular card type.

<form name="myForm">
<select id="cardtype" name="cards">
<option value="">--- Please select ---</option>
<option value="mastercard" selected="selected">Mastercard</option>
<option value="maestro">Maestro</option>
<option value="solo">Solo (UK only)</option>
<option value="visaelectron">Visa Electron</option>
<option value="visadebit">Visa Debit</option>
</select><br />

<input type="submit" name="submit" class="button" value="SUBMIT" onmouseover="validate()"></form>

<script>
function validate() {
 if (document.myform.cards.value == "") {
    alert("Please select a card type");
    document.myForm.cards.focus();
}
</script>

import regex
text = 'ask her to call Mary back when she comes back'                           
p = r'(?i)(?s)call(.*?)back'
for match in regex.finditer(p, str(text)):
    print (match.group(1))

Output: Mary

Easiest way is to use --link, however the newer versions of docker are moving away from that and in fact that switch will be removed soon.

The link below offers a nice how too, on connecting two containers. You can skip the attach portion, since that is just a useful how to on adding items to images.

https://deis.com/blog/2016/connecting-docker-containers-1/

The part you are interested in is the communication between two containers. The easiest way, is to refer to the DB container by name from the webserver container.

Example:

you named the db container db1 and the webserver container web0. The containers should both be on the bridge network, which means the web container should be able to connect to the DB container by referring to it's name.

So if you have a web config file for your app, then for DB host you will use the name db1.

if you are using an older version of docker, then you should use --link.

Example:

Step 1: docker run --name db1 oracle/database:12.1.0.2-ee

then when you start the web app. use:

Step 2: docker run --name web0 --link db1 webapp/webapp:3.0

and the web app will be linked to the DB. However, as I said the --link switch will be removed soon.

I'd use docker compose instead, which will build a network for you. However; you will need to download docker compose for your system. https://docs.docker.com/compose/install/#prerequisites

an example setup is like this:

file name is base.yml

version: "2"
services:
  webserver:
    image: "moodlehq/moodle-php-apache:7.1
    depends_on:
      - db
    volumes:
      - "/var/www/html:/var/www/html"
      - "/home/some_user/web/apache2_faildumps.conf:/etc/apache2/conf-enabled/apache2_faildumps.conf"
    environment:
      MOODLE_DOCKER_DBTYPE: pgsql
      MOODLE_DOCKER_DBNAME: moodle
      MOODLE_DOCKER_DBUSER: moodle
      MOODLE_DOCKER_DBPASS: "m@0dl3ing"
      HTTP_PROXY: "${HTTP_PROXY}"
      HTTPS_PROXY: "${HTTPS_PROXY}"
      NO_PROXY: "${NO_PROXY}"
  db:
    image: postgres:9
    environment:
      POSTGRES_USER: moodle
      POSTGRES_PASSWORD: "m@0dl3ing"
      POSTGRES_DB: moodle
      HTTP_PROXY: "${HTTP_PROXY}"
      HTTPS_PROXY: "${HTTPS_PROXY}"
      NO_PROXY: "${NO_PROXY}"

this will name the network a generic name, I can't remember off the top of my head what that name is, unless you use the --name switch.

IE docker-compose --name setup1 up base.yml

NOTE: if you use the --name switch, you will need to use it when ever calling docker compose, so docker-compose --name setup1 down this is so you can have more then one instance of webserver and db, and in this case, so docker compose knows what instance you want to run commands against; and also so you can have more then one running at once. Great for CI/CD, if you are running test in parallel on the same server.

Docker compose also has the same commands as docker so docker-compose --name setup1 exec webserver do_some_command

best part is, if you want to change db's or something like that for unit test you can include an additional .yml file to the up command and it will overwrite any items with similar names, I think of it as a key=>value replacement.

Example:

db.yml

version: "2"
services:
  webserver:
    environment:
      MOODLE_DOCKER_DBTYPE: oci
      MOODLE_DOCKER_DBNAME: XE
  db:
    image: moodlehq/moodle-db-oracle

Then call docker-compose --name setup1 up base.yml db.yml

This will overwrite the db. with a different setup. When needing to connect to these services from each container, you use the name set under service, in this case, webserver and db.

I think this might actually be a more useful setup in your case. Since you can set all the variables you need in the yml files and just run the command for docker compose when you need them started. So a more start it and forget it setup.

NOTE: I did not use the --port command, since exposing the ports is not needed for container->container communication. It is needed only if you want the host to connect to the container, or application from outside of the host. If you expose the port, then the port is open to all communication that the host allows. So exposing web on port 80 is the same as starting a webserver on the physical host and will allow outside connections, if the host allows it. Also, if you are wanting to run more then one web app at once, for whatever reason, then exposing port 80 will prevent you from running additional webapps if you try exposing on that port as well. So, for CI/CD it is best to not expose ports at all, and if using docker compose with the --name switch, all containers will be on their own network so they wont collide. So you will pretty much have a container of containers.

UPDATE: After using features further and seeing how others have done it for CICD programs like Jenkins. Network is also a viable solution.

Example:

docker network create test_network

The above command will create a "test_network" which you can attach other containers too. Which is made easy with the --network switch operator.

Example:

docker run \
    --detach \
    --name db1 \
    --network test_network \
    -e MYSQL_ROOT_PASSWORD="${DBPASS}" \
    -e MYSQL_DATABASE="${DBNAME}" \
    -e MYSQL_USER="${DBUSER}" \
    -e MYSQL_PASSWORD="${DBPASS}" \
    --tmpfs /var/lib/mysql:rw \
    mysql:5

Of course, if you have proxy network settings you should still pass those into the containers using the "-e" or "--env-file" switch statements. So the container can communicate with the internet. Docker says the proxy settings should be absorbed by the container in the newer versions of docker; however, I still pass them in as an act of habit. This is the replacement for the "--link" switch which is going away. Once the containers are attached to the network you created you can still refer to those containers from other containers using the 'name' of the container. Per the example above that would be db1. You just have to make sure all containers are connected to the same network, and you are good to go.

For a detailed example of using network in a cicd pipeline, you can refer to this link: https://git.in.moodle.com/integration/nightlyscripts/blob/master/runner/master/run.sh

Which is the script that is ran in Jenkins for a huge integration tests for Moodle, but the idea/example can be used anywhere. I hope this helps others.

have you installed a user db2inst2, i think, i remember, that db2inst1 is very administrative

package com.your.package.spring.fix;

import java.io.UnsupportedEncodingException;
import java.net.URLDecoder;
import java.net.URLEncoder;

/**
 * @author Szilard_Jakab (JaKi)
 * Workaround for Spring 3 @ResponseBody issue - get incorrectly 
   encoded parameters     from the URL (in example @ JSON response)
 * Tested @ Spring 3.0.4
 */
public class RepairWrongUrlParamEncoding {
    private static String restoredParamToOriginal;

    /**
    * @param wrongUrlParam
    * @return Repaired url param (UTF-8 encoded)
    * @throws UnsupportedEncodingException
    */
    public static String repair(String wrongUrlParam) throws 
                                            UnsupportedEncodingException {
    /* First step: encode the incorrectly converted UTF-8 strings back to 
                  the original URL format
    */
    restoredParamToOriginal = URLEncoder.encode(wrongUrlParam, "ISO-8859-1");

    /* Second step: decode to UTF-8 again from the original one
    */
    return URLDecoder.decode(restoredParamToOriginal, "UTF-8");
    }
}

After I have tried lot of workaround for this issue.. I thought this out and it works fine.

you can call mysql_fetch_array() for no_of_row time

Most of what I write has already been covered by Pressacco, but this is specific to SpecFlow.

I was getting this message for the <specFlow> element and therefore I added a specflow.xsd file to the solution this answer (with some modifications to allow for the <plugins> element).

Thereafter I (like Pressacco), right clicked within the file buffer of app.config and selected properties, and within Schemas, I added "specflow.xsd" to the end. The entirety of Schemas now reads:

"C:\Program Files (x86)\Microsoft Visual Studio 12.0\xml\Schemas\1033\DotNetConfig.xsd" "C:\Program Files (x86)\Microsoft Visual Studio 12.0\xml\Schemas\EntityFrameworkConfig_6_1_0.xsd" "C:\Program Files (x86)\Microsoft Visual Studio 12.0\xml\Schemas\RazorCustomSchema.xsd" "specflow.xsd"

// THE LOOP THAT DO EVERYTHING!!!!!!!

My guess is that you have to also style the views that are generated from the menu information in your onCreateOptionsMenu(). The styling you applied so far is working, but I doubt that the menu items, when rendered with text use a style that is the same as the title part of the ActionBar.

You may want to look at Menu.getActionView() to get the view for the menu action and then adjust it accordingly.

I found JXDatePicker as a better solution to this. It gives what you need and very easy to use.

import java.text.SimpleDateFormat;
import java.util.Calendar;
import javax.swing.JFrame;
import javax.swing.JPanel;
import org.jdesktop.swingx.JXDatePicker;

public class DatePickerExample extends JPanel {

    public static void main(String[] args) {
        JFrame frame = new JFrame("JXPicker Example");
        JPanel panel = new JPanel();

        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        frame.setBounds(400, 400, 250, 100);

        JXDatePicker picker = new JXDatePicker();
        picker.setDate(Calendar.getInstance().getTime());
        picker.setFormats(new SimpleDateFormat("dd.MM.yyyy"));

        panel.add(picker);
        frame.getContentPane().add(panel);

        frame.setVisible(true);
    }
}

The easiest way I found, summarized in a few pictures:

You could skip a few steps (up to step 4) by simply navigating to chrome://settings/languages right away.

Recently, I explored the possibilities to parameterize the folder to scan through and the place where the result of recursive scan will be stored. At the end, I also did summarize the number of folders scanned and number of files inside as well. Sharing it with community in case it may help other developers.

    ##Script Starts
    #read folder to scan and file location to be placed

    $whichFolder = Read-Host -Prompt 'Which folder to Scan?'  
    $whereToPlaceReport = Read-Host -Prompt 'Where to place Report'
    $totalFolders = 1
    $totalFiles = 0

    Write-Host "Process started..."

    #IMP separator ? : used as a file in window cannot contain this special character in the file name

    #Get Foldernames into Variable for ForEach Loop
    $DFSFolders = get-childitem -path $whichFolder | where-object {$_.Psiscontainer -eq "True"} |select-object name ,fullName

    #Below Logic for Main Folder
    $mainFiles = get-childitem -path "C:\Users\User\Desktop" -file
    ("Folder Path" + "?" + "Folder Name" + "?" + "File Name " + "?"+ "File Length" )| out-file "$whereToPlaceReport\Report.csv" -Append

    #Loop through folders in main Directory
    foreach($file in $mainFiles)
    {

    $totalFiles = $totalFiles + 1
    ("C:\Users\User\Desktop" + "?" + "Main Folder" + "?"+ $file.name + "?" + $file.length ) | out-file "$whereToPlaceReport\Report.csv" -Append
    }


    foreach ($DFSfolder in $DFSfolders)
    {
    #write the folder name in begining
    $totalFolders = $totalFolders + 1

    write-host " Reading folder C:\Users\User\Desktop\$($DFSfolder.name)"
    #$DFSfolder.fullName | out-file "C:\Users\User\Desktop\PoC powershell\ok2.csv" -Append
    #For Each Folder obtain objects in a specified directory, recurse then filter for .sft file type, obtain the filename, then group, sort and eventually show the file name and total incidences of it.

    $files = get-childitem -path "$whichFolder\$($DFSfolder.name)" -recurse

    foreach($file in $files)
    {
    $totalFiles = $totalFiles + 1
    ($DFSfolder.fullName + "?" + $DFSfolder.name + "?"+ $file.name + "?" + $file.length ) | out-file "$whereToPlaceReport\Report.csv" -Append
    }

    }


    # If running in the console, wait for input before closing.
    if ($Host.Name -eq "ConsoleHost")
    {

    Write-Host "" 
    Write-Host ""
    Write-Host ""

    Write-Host  "                            **Summary**"  -ForegroundColor Red
    Write-Host  "                            ------------" -ForegroundColor Red

    Write-Host  "                           Total Folders Scanned = $totalFolders "  -ForegroundColor Green
    Write-Host  "                           Total Files   Scanned = $totalFiles "     -ForegroundColor Green

    Write-Host "" 
    Write-Host "" 
        Write-Host "I have done my Job,Press any key to exit" -ForegroundColor white
        $Host.UI.RawUI.FlushInputBuffer()   # Make sure buffered input doesn't "press a key" and skip the ReadKey().
        $Host.UI.RawUI.ReadKey("NoEcho,IncludeKeyUp") > $null
    }

##Output

##Bat Code to run above powershell command

@ECHO OFF
SET ThisScriptsDirectory=%~dp0
SET PowerShellScriptPath=%ThisScriptsDirectory%MyPowerShellScript.ps1
PowerShell -NoProfile -ExecutionPolicy Bypass -Command "& {Start-Process PowerShell -ArgumentList '-NoProfile -ExecutionPolicy Bypass -File ""%PowerShellScriptPath%""' -Verb RunAs}";

There are many ways to do this. To fix your current code using %-formatting, you need to pass in a tuple:

1. Pass it as a tuple:

   print("Total score for %s is %s" % (name, score))
   

A tuple with a single element looks like ('this',).

Here are some other common ways of doing it:

2. Pass it as a dictionary:

   print("Total score for %(n)s is %(s)s" % {'n': name, 's': score})
   

There's also new-style string formatting, which might be a little easier to read:

3. Use new-style string formatting:

   print("Total score for {} is {}".format(name, score))
   

4. Use new-style string formatting with numbers (useful for reordering or printing the same one multiple times):

   print("Total score for {0} is {1}".format(name, score))
   

5. Use new-style string formatting with explicit names:

   print("Total score for {n} is {s}".format(n=name, s=score))
   

6. Concatenate strings:

   print("Total score for " + str(name) + " is " + str(score))
   

The clearest two, in my opinion:

7. Just pass the values as parameters:

   print("Total score for", name, "is", score)
   

   If you don't want spaces to be inserted automatically by print in the above example, change the sep parameter:

   print("Total score for ", name, " is ", score, sep='')
   

   If you're using Python 2, won't be able to use the last two because print isn't a function in Python 2. You can, however, import this behavior from __future__:

   from __future__ import print_function
   

8. Use the new f-string formatting in Python 3.6:

   print(f'Total score for {name} is {score}')
   

If you are using webpack 4, the following code is tree shakable.

import { has } from 'lodash-es';

The points to note;

1. CommonJS modules are not tree shakable so you should definitely use lodash-es, which is the Lodash library exported as ES Modules, rather than lodash (CommonJS).

2. lodash-es's package.json contains "sideEffects": false, which notifies webpack 4 that all the files inside the package are side effect free (see https://webpack.js.org/guides/tree-shaking/#mark-the-file-as-side-effect-free).

3. This information is crucial for tree shaking since module bundlers do not tree shake files which possibly contain side effects even if their exported members are not used in anywhere.

Edit

As of version 1.9.0, Parcel also supports "sideEffects": false, threrefore import { has } from 'lodash-es'; is also tree shakable with Parcel. It also supports tree shaking CommonJS modules, though it is likely tree shaking of ES Modules is more efficient than CommonJS according to my experiment.

Using jQuery, scrollTop is used to set the vertical position of scollbar for any given element. there is also a nice jquery scrollTo plugin used to scroll with animation and different options (demos)

var myDiv = $("#div_id").get(0);
myDiv.scrollTop = myDiv.scrollHeight;

if you want to use jQuery's animate method to add animation while scrolling down, check the following snippet:

var myDiv = $("#div_id").get(0);
myDiv.animate({
    scrollTop: myDiv.scrollHeight
  }, 500);

Use ?:

<form action="?" method="post">

It will send the user back to the same page.

Use my custome class to check or request permisson

public class Permissons {

        //Request Permisson
        public static void Request_STORAGE(Activity act,int code)
        {

            ActivityCompat.requestPermissions(act, new
                    String[]{android.Manifest.permission.WRITE_EXTERNAL_STORAGE},code);
        }
        public static void Request_CAMERA(Activity act,int code)
        {
            ActivityCompat.requestPermissions(act, new
                    String[]{Manifest.permission.CAMERA},code);
        }
        public static void Request_FINE_LOCATION(Activity act,int code)
        {
            ActivityCompat.requestPermissions(act, new
                    String[]{Manifest.permission.ACCESS_FINE_LOCATION},code);
        }
        public static void Request_READ_SMS(Activity act,int code)
        {
            ActivityCompat.requestPermissions(act, new
                    String[]{Manifest.permission.READ_SMS},code);
        }
        public static void Request_READ_CONTACTS(Activity act,int code)
        {
            ActivityCompat.requestPermissions(act, new
                    String[]{Manifest.permission.READ_CONTACTS},code);
        }
        public static void Request_READ_CALENDAR(Activity act,int code)
        {
            ActivityCompat.requestPermissions(act, new
                    String[]{Manifest.permission.READ_CALENDAR},code);
        }
        public static void Request_RECORD_AUDIO(Activity act,int code)
        {
            ActivityCompat.requestPermissions(act, new
                    String[]{Manifest.permission.RECORD_AUDIO},code);
        }

        //Check Permisson
        public static boolean Check_STORAGE(Activity act)
        {
            int result = ContextCompat.checkSelfPermission(act,android.Manifest.permission.WRITE_EXTERNAL_STORAGE);
            return result == PackageManager.PERMISSION_GRANTED;
        }
        public static boolean Check_CAMERA(Activity act)
        {
            int result = ContextCompat.checkSelfPermission(act, Manifest.permission.CAMERA);
            return result == PackageManager.PERMISSION_GRANTED;
        }
        public static boolean Check_FINE_LOCATION(Activity act)
        {
            int result = ContextCompat.checkSelfPermission(act, Manifest.permission.ACCESS_FINE_LOCATION);
            return result == PackageManager.PERMISSION_GRANTED;
        }
        public static boolean Check_READ_SMS(Activity act)
        {
            int result = ContextCompat.checkSelfPermission(act, Manifest.permission.READ_SMS);
            return result == PackageManager.PERMISSION_GRANTED;
        }
        public static boolean Check_READ_CONTACTS(Activity act)
        {
            int result = ContextCompat.checkSelfPermission(act, Manifest.permission.READ_CONTACTS);
            return result == PackageManager.PERMISSION_GRANTED;
        }
        public static boolean Check_READ_CALENDAR(Activity act)
        {
            int result = ContextCompat.checkSelfPermission(act, Manifest.permission.READ_CALENDAR);
            return result == PackageManager.PERMISSION_GRANTED;
        }
        public static boolean Check_RECORD_AUDIO(Activity act)
        {
            int result = ContextCompat.checkSelfPermission(act, Manifest.permission.RECORD_AUDIO);
            return result == PackageManager.PERMISSION_GRANTED;
        }
    }

Example

if(!Permissons.Check_STORAGE(MainActivity.this))
{
   //if not permisson granted so request permisson with request code
   Permissons.Request_STORAGE(MainActivity.this,22);
}

NOTE: not for Windows

Using ren-1.0 the correct form is:

"ren *.*" "#2.jpg"

From man ren

The replacement pattern is another filename with embedded wildcard indexes, each of which consists of the character # followed by a digit from 1 to 9. In the new name of a matching file, the wildcard indexes are replaced by the actual characters that matched the referenced wildcards in the original filename.

and

Note that the shell normally expands the wildcards * and ?, which in the case of ren is undesirable. Thus, in most cases it is necessary to enclose the search pattern in quotes.

This worked for me:

for /d /r . %%d in (bin,obj) do @if exist "%%d" rd /s/q "%%d"

Based on this answer on superuser.com

I suggest that you make a .gitignore file that includes everything other than the assets folder (all the other files that are originally inside a unity project). Next, you should place all your game projects in one folder. Next, duplicate the .gitignore in every single project folder for your games. This will exclude the libraries and unnecessary folders inside your projects other than the assets. If you have any projects you don't want, then put them in a new .gitignore inside where your game projects are stored. Note: You can have multiple .gitignore's and .gitignore is based on relative paths. I hope that helped!

So I created an account just so I could help fix this problem that is plaguing a lot of people and where the fixes above aren't working.

If you get this error and nothing here helps. Try clicking the "Resume program play button" until the program finishes past the error. Then click in the console tab next to debug and read the red text.

I was getting that source code error even though my issue was trying to insert a value into a null Array. Step 1 Click the resume button

Step 2 Click the console tab and read the red text

My 2 cents here (even when there are a lot of cool/working responses)

I created this alias in my .gitconfig

[alias]
 ...
 conflicts = !git diff --name-only --diff-filter=U | grep -oE '[^/ ]+$'

which is going to show me just the names of the files with conflicts... not their whole path :)

I had a similar problem; the anchor text in my Bootstrap4 navbar wasn't centered. Simply added text-center in the anchor's class.

Complete example below. I just love the copy/paste :)

HTML

<div class="container">
    <div class="row">
        <div class="col-md-8 col-md-offset-2">
           <div class="panel panel-default">
              <div class="panel-body">
                  <form class="form-horizontal" method="" action="">

                     <div class="form-group">
                        <label class="col-md-4 control-label">Email</label>
                           <div class="col-md-6">
                               <input type="email" class="form-control" name="email" value="">
                           </div>
                     </div>
                     <div class="form-group">
                       <label class="col-md-4 control-label">Password</label>
                          <div class="col-md-6">
                              <input id="password-field" type="password" class="form-control" name="password" value="secret">
                              <span toggle="#password-field" class="fa fa-lg fa-eye field-icon toggle-password"></span>
                          </div>
                     </div>
                 </form>
              </div>
           </div>
      </div>
  </div>

CSS

.field-icon {
  float: right;
  margin-right: 8px;
  margin-top: -23px;
  position: relative;
  z-index: 2;
  cursor:pointer;
}

.container{
  padding-top:50px;
  margin: auto;
}

JS

$(".toggle-password").click(function() {
   $(this).toggleClass("fa-eye fa-eye-slash");
   var input = $($(this).attr("toggle"));
   if (input.attr("type") == "password") {
     input.attr("type", "text");
   } else {
     input.attr("type", "password");
   }
});

Try it here: https://codepen.io/anon/pen/ZoMQZP

If you have access to the NgModelController (you can only get access to it from a directive) then you can call

ngModel.$setViewValue("your new view value");
// or to keep the view value the same and just change it to dirty
ngModel.$setViewValue(ngModel.$viewValue);

Java 8 way:

"The quick brown fox jumped over the lazy dog."
        .chars()
        .mapToObj(i -> (char) i)
        .collect(Collectors.groupingBy(Object::toString, Collectors.counting()));

Easy Way:

function diff_hours(dt2, dt1) 
 {

  var diff =(dt2.getTime() - dt1.getTime()) / 1000;
  diff /= (60 * 60);
  return Math.abs(Math.round(diff));

 }


function diff_minutes(dt2, dt1) 
 {

  var diff =(dt2.getTime() - dt1.getTime()) / 1000;
  diff /= (60);
  return Math.abs(Math.round(diff));

 }

function diff_seconds(dt2, dt1) 
 {

  var diff =(dt2.getTime() - dt1.getTime()) / 1000;
  return Math.abs(Math.round(diff));

 }

function diff_miliseconds(dt2, dt1) 
 {

  var diff =(dt2.getTime() - dt1.getTime());
  return Math.abs(Math.round(diff));

 }


dt1 = new Date(2014,10,2);
dt2 = new Date(2014,10,3);
console.log(diff_hours(dt1, dt2));


dt1 = new Date("October 13, 2014 08:11:00");
dt2 = new Date("October 14, 2014 11:13:00");
console.log(diff_hours(dt1, dt2));

console.log(diff_minutes(dt1, dt2));

console.log(diff_seconds(dt1, dt2));

console.log(diff_miliseconds(dt1, dt2));

There are two methods you can use. Both require creating a user and a database.

By default psql connects to the database with the same name as the user. So there is a convention to make that the "user's database". And there is no reason to break that convention if your user only needs one database. We'll be using mydatabase as the example database name.

1. Using createuser and createdb, we can be explicit about the database name,

   $ sudo -u postgres createuser -s $USER
   $ createdb mydatabase
   $ psql -d mydatabase
   

   You should probably be omitting that entirely and letting all the commands default to the user's name instead.

   $ sudo -u postgres createuser -s $USER
   $ createdb
   $ psql
   

2. Using the SQL administration commands, and connecting with a password over TCP

   $ sudo -u postgres psql postgres
   

   And, then in the psql shell

   CREATE ROLE myuser LOGIN PASSWORD 'mypass';
   CREATE DATABASE mydatabase WITH OWNER = myuser;
   

   Then you can login,

   $ psql -h localhost -d mydatabase -U myuser -p <port>
   

   If you don't know the port, you can always get it by running the following, as the postgres user,

   SHOW port;
   

   Or,

   $ grep "port =" /etc/postgresql/*/main/postgresql.conf
   

Sidenote: the postgres user

I suggest NOT modifying the postgres user.

1. It's normally locked from the OS. No one is supposed to "log in" to the operating system as postgres. You're supposed to have root to get to authenticate as postgres.
2. It's normally not password protected and delegates to the host operating system. This is a good thing. This normally means in order to log in as postgres which is the PostgreSQL equivalent of SQL Server's SA, you have to have write-access to the underlying data files. And, that means that you could normally wreck havoc anyway.
3. By keeping this disabled, you remove the risk of a brute force attack through a named super-user. Concealing and obscuring the name of the superuser has advantages.

I'm using Anaconda3 on Windows 10. When you install it rembember to flag "add to Enviroment Variables".

Prerequisite: A notebook configuration file

Check to see if you have a notebook configuration file, jupyter_notebook_config.py. The default location for this file is your Jupyter folder located in your home directory:

• Windows: C:\\Users\\USERNAME\\.jupyter\\jupyter_notebook_config.py
• OS X: /Users/USERNAME/.jupyter/jupyter_notebook_config.py
• Linux: /home/USERNAME/.jupyter/jupyter_notebook_config.py

If you don't already have a Jupyter folder, or if your Jupyter folder doesn't contain a notebook configuration file, run the following command:

$ jupyter notebook --generate-config

This command will create the Jupyter folder if necessary, and create notebook configuration file, jupyter_notebook_config.py, in this folder.

By default, Jupyter Notebook only accepts connections from localhost.

Edit the jupyter_notebook_config.py file as following to accept all incoming connections:

c.NotebookApp.allow_origin = '*' #allow all origins

You'll also need to change the IPs that the notebook will listen on:

c.NotebookApp.ip = '0.0.0.0' # listen on all IPs

So when sending the message to telegram you use:

$token = <Enter Your Token Here>
$url = "https://api.telegram.org/bot".$token;

$chat_id = <The Chat Id Goes Here>;
$test = <Message goes Here>;

//sending Message normally without styling
$response = file_get_content($url."\sendMessage?chat_id=$chat_id&text=$text");

If our message has html tags in it we add "parse_mode" so that our url becomes:

$response = file_get_content($url."\sendMessage?chat_id=$chat_id&text=$text&parse_mode=html")

parse mode can be "HTML" or "markdown"

Even later, but this could be usefull too. There is the jQuery-backstretch-plugin you can use as a polyfill for background-size: cover. I guess it must be possible (and fairly simple) to grab the css-background-url property with jQuery and feed it to the jQuery-backstretch plugin. Good practice would be to test for background-size-support with modernizr and use this plugin as a fallback.

The backstretch-plugin was mentioned on SO here.The jQuery-backstretch-plugin-site is here.

In similar fashion you could make a jQuery-plugin or script that makes background-size work in your situation (background-size: 100%) and in IE8-. So to answer your question: Yes there is a way but atm there is no plug-and-play solution (ie you have to do some coding yourself).

(disclaimer: I didn't examine the backstretch-plugin thoroughly but it seems to do the same as background-size: cover)

This is about as late compared to the guy who said he was late as he was to the original answer, but in my case (MySQL via WAMP on Windows 7), I had to use:

--skip-lock-tables

Hashmaps can only use classes, not primitives. This page from programmerinterview.com might be of use in guiding you to finding the answer. To be honest, I haven't figured out the answer to this problem in detail myself.

Try something like this:

type: application/ms-excel

/**
 *  used to get file from server
 */

this.http.get(`${environment.apiUrl}`,{
          responseType: 'arraybuffer',headers:headers} 
         ).subscribe(response => this.downLoadFile(response, "application/ms-excel"));


    /**
     * Method is use to download file.
     * @param data - Array Buffer data
     * @param type - type of the document.
     */
    downLoadFile(data: any, type: string) {
        let blob = new Blob([data], { type: type});
        let url = window.URL.createObjectURL(blob);
        let pwa = window.open(url);
        if (!pwa || pwa.closed || typeof pwa.closed == 'undefined') {
            alert( 'Please disable your Pop-up blocker and try again.');
        }
    }

I have a work around for this problem. I have verified this fix in my own app(300K+ DAU), which can reduce at least 95% of this kind of crash, but still cannot 100% avoid this problem.

This problem happens even when you ensure to call startForeground() just after service started as Google documented. It may be because the service creation and initialization process already cost more than 5 seconds in many scenarios, then no matter when and where you call startForeground() method, this crash is unavoidable.

My solution is to ensure that startForeground() will be executed within 5 seconds after startForegroundService() method, no matter how long your service need to be created and initialized. Here is the detailed solution.

1. Do not use startForegroundService at the first place, use bindService() with auto_create flag. It will wait for the service initialization. Here is the code, my sample service is MusicService:

   final Context applicationContext = context.getApplicationContext();
   Intent intent = new Intent(context, MusicService.class);
   applicationContext.bindService(intent, new ServiceConnection() {
       @Override
       public void onServiceConnected(ComponentName name, IBinder binder) {
           if (binder instanceof MusicBinder) {
               MusicBinder musicBinder = (MusicBinder) binder;
               MusicService service = musicBinder.getService();
               if (service != null) {
                   // start a command such as music play or pause.
                   service.startCommand(command);
                   // force the service to run in foreground here.
                   // the service is already initialized when bind and auto_create.
                   service.forceForeground();
               }
           }
           applicationContext.unbindService(this);
       }
   
       @Override
       public void onServiceDisconnected(ComponentName name) {
       }
   }, Context.BIND_AUTO_CREATE);
   

2. Then here is MusicBinder implementation:

   /**
    * Use weak reference to avoid binder service leak.
    */
    public class MusicBinder extends Binder {
   
        private WeakReference<MusicService> weakService;
   
        /**
         * Inject service instance to weak reference.
         */
        public void onBind(MusicService service) {
            this.weakService = new WeakReference<>(service);
        }
   
        public MusicService getService() {
            return weakService == null ? null : weakService.get();
        }
    }
   

3. The most important part, MusicService implementation, forceForeground() method will ensure that startForeground() method is called just after startForegroundService():

   public class MusicService extends MediaBrowserServiceCompat {
   ...
       private final MusicBinder musicBind = new MusicBinder();
   ...
       @Override
       public IBinder onBind(Intent intent) {
           musicBind.onBind(this);
           return musicBind;
       }
   ...
       public void forceForeground() {
           // API lower than 26 do not need this work around.
           if (Build.VERSION.SDK_INT >= 26) {
               Intent intent = new Intent(this, MusicService.class);
               // service has already been initialized.
               // startForeground method should be called within 5 seconds.
               ContextCompat.startForegroundService(this, intent);
               Notification notification = mNotificationHandler.createNotification(this);
               // call startForeground just after startForegroundService.
               startForeground(Constants.NOTIFICATION_ID, notification);
           }
       }
   }
   

4. If you want to run the step 1 code snippet in a pending intent, such as if you want to start a foreground service in a widget (a click on widget button) without opening your app, you can wrap the code snippet in a broadcast receiver, and fire a broadcast event instead of start service command.

That is all. Hope it helps. Good luck.

mp3 music to wav

ffmpeg -i music.mp3 music.wav

truncate to fit video

ffmpeg -i music.wav -ss 0 -t 37 musicshort.wav

mix music and video

ffmpeg -i musicshort.wav -i movie.avi final_video.avi

If you are running your application just on localhost and it is not yet live, I believe it is very difficult to send mail using this.

Once you put your application online, I believe that this problem should be automatically solved. But i think ini_set() helps you to change the values in php.ini during run time.

I believe there are two answers. One using 'pure' Javascript with IIFE function to hide its auxiliary construction functions. And the other using a NodeJS module to also hide its auxiliary construction functions.

I will show only the example with a NodeJS module.

Class Vector2d.js:

/*

    Implement a class of type Vetor2d with three types of constructors.

*/

// If a constructor function is successfully executed,
// must have its value changed to 'true'.let global_wasExecuted = false;  
global_wasExecuted = false;   

//Tests whether number_value is a numeric type
function isNumber(number_value) {
    
    let hasError = !(typeof number_value === 'number') || !isFinite(number_value);

    if (hasError === false){
        hasError = isNaN(number_value);
    }

    return !hasError;
}

// Object with 'x' and 'y' properties associated with its values.
function vector(x,y){
    return {'x': x, 'y': y};
}

//constructor in case x and y are 'undefined'
function new_vector_zero(x, y){

    if (x === undefined && y === undefined){
        global_wasExecuted = true;
        return new vector(0,0);
    }
}

//constructor in case x and y are numbers
function new_vector_numbers(x, y){

    let x_isNumber = isNumber(x);
    let y_isNumber = isNumber(y);

    if (x_isNumber && y_isNumber){
        global_wasExecuted = true;
        return new vector(x,y);
    }
}

//constructor in case x is an object and y is any
//thing (he is ignored!)
function new_vector_object(x, y){

    let x_ehObject = typeof x === 'object';
    //ignore y type

    if (x_ehObject){

        //assigns the object only for clarity of code
        let x_object = x;

        //tests whether x_object has the properties 'x' and 'y'
        if ('x' in x_object && 'y' in x_object){

            global_wasExecuted = true;

            /*
            we only know that x_object has the properties 'x' and 'y',
            now we will test if the property values ??are valid,
            calling the class constructor again.            
            */
            return new Vector2d(x_object.x, x_object.y);
        }

    }
}


//Function that returns an array of constructor functions
function constructors(){
    let c = [];
    c.push(new_vector_zero);
    c.push(new_vector_numbers);
    c.push(new_vector_object);

    /*
        Your imagination is the limit!
        Create as many construction functions as you want.    
    */

    return c;
}

class Vector2d {

    constructor(x, y){

        //returns an array of constructor functions
        let my_constructors = constructors(); 

        global_wasExecuted = false;

        //variable for the return of the 'vector' function
        let new_vector;     

        //traverses the array executing its corresponding constructor function
        for (let index = 0; index < my_constructors.length; index++) {

            //execute a function added by the 'constructors' function
            new_vector = my_constructors[index](x,y);
            
            if (global_wasExecuted) {
            
                this.x = new_vector.x;
                this.y = new_vector.y;

                break; 
            };
        };
    }

    toString(){
        return `(x: ${this.x}, y: ${this.y})`;
    }

}

//Only the 'Vector2d' class will be visible externally
module.exports = Vector2d;  

The useVector2d.js file uses the Vector2d.js module:

const Vector = require('./Vector2d');

let v1 = new Vector({x: 2, y: 3});
console.log(`v1 = ${v1.toString()}`);

let v2 = new Vector(1, 5.2);
console.log(`v2 = ${v2.toString()}`);

let v3 = new Vector();
console.log(`v3 = ${v3.toString()}`);

Terminal output:

v1 = (x: 2, y: 3)
v2 = (x: 1, y: 5.2)
v3 = (x: 0, y: 0)

With this we avoid dirty code (many if's and switch's spread throughout the code), difficult to maintain and test. Each building function knows which conditions to test. Increasing and / or decreasing your building functions is now simple.

HashMap that also works with keys other than strings and integers with O(1) read complexity (depending on quality of your own hash-function).

You can make a simple hashMap yourself. What a hashMap does is storing items in a array using the hash as index/key. Hash-functions give collisions once in a while (not often, but they may do), so you have to store multiple items for an entry in the hashMap. That simple is a hashMap:

class IEqualityComparer {
    public function equals($x, $y) {
        throw new Exception("Not implemented!");
    }
    public function getHashCode($obj) {
        throw new Exception("Not implemented!");
    }
}

class HashMap {
    private $map = array();
    private $comparer;

    public function __construct(IEqualityComparer $keyComparer) {
        $this->comparer = $keyComparer;
    }

    public function has($key) {
        $hash = $this->comparer->getHashCode($key);

        if (!isset($this->map[$hash])) {
            return false;
        }

        foreach ($this->map[$hash] as $item) {
            if ($this->comparer->equals($item['key'], $key)) {
                return true;
            }
        }

        return false;
    }

    public function get($key) {
        $hash = $this->comparer->getHashCode($key);

        if (!isset($this->map[$hash])) {
            return false;
        }

        foreach ($this->map[$hash] as $item) {
            if ($this->comparer->equals($item['key'], $key)) {
                return $item['value'];
            }
        }

        return false;
    }

    public function del($key) {
        $hash = $this->comparer->getHashCode($key);

        if (!isset($this->map[$hash])) {
            return false;
        }

        foreach ($this->map[$hash] as $index => $item) {
            if ($this->comparer->equals($item['key'], $key)) {
                unset($this->map[$hash][$index]);
                if (count($this->map[$hash]) == 0)
                    unset($this->map[$hash]);

                return true;
            }
        }

        return false;
    }

    public function put($key, $value) {
        $hash = $this->comparer->getHashCode($key);

        if (!isset($this->map[$hash])) {
            $this->map[$hash] = array();
        }

        $newItem = array('key' => $key, 'value' => $value);        

        foreach ($this->map[$hash] as $index => $item) {
            if ($this->comparer->equals($item['key'], $key)) {
                $this->map[$hash][$index] = $newItem;
                return;
            }
        }

        $this->map[$hash][] = $newItem;
    }
}

For it to function you also need a hash-function for your key and a comparer for equality (if you only have a few items or for another reason don't need speed you can let the hash-function return 0; all items will be put in same bucket and you will get O(N) complexity)

Here is an example:

class IntArrayComparer extends IEqualityComparer {
    public function equals($x, $y) {
        if (count($x) !== count($y))
            return false;

        foreach ($x as $key => $value) {
            if (!isset($y[$key]) || $y[$key] !== $value)
                return false;
        }

        return true;
    }

    public function getHashCode($obj) {
        $hash = 0;
        foreach ($obj as $key => $value)
            $hash ^= $key ^ $value;

        return $hash;
    }
}

$hashmap = new HashMap(new IntArrayComparer());

for ($i = 0; $i < 10; $i++) {
    for ($j = 0; $j < 10; $j++) {
        $hashmap->put(array($i, $j), $i * 10 + $j);
    }
}

echo $hashmap->get(array(3, 7)) . "<br/>";
echo $hashmap->get(array(5, 1)) . "<br/>";

echo ($hashmap->has(array(8, 4))? 'true': 'false') . "<br/>";
echo ($hashmap->has(array(-1, 9))? 'true': 'false') . "<br/>";
echo ($hashmap->has(array(6))? 'true': 'false') . "<br/>";
echo ($hashmap->has(array(1, 2, 3))? 'true': 'false') . "<br/>";

$hashmap->del(array(8, 4));
echo ($hashmap->has(array(8, 4))? 'true': 'false') . "<br/>";

Which gives as output:

37
51
true
false
false
false
false

I was looking for the answer of the same question but for a while I found my own solution and I wanted to share it for other people who will need those codes in the future. Here is another solution without function.

Dim control As Boolean
Dim controlval As String
Dim resultval As String
Dim i as Integer

controlval = "A1B2C3D4"

For i = 1 To Len(controlval)
control = IsNumeric(Mid(controlval, i, 1))
If control = True Then resultval = resultval & Mid(controlval, i, 1)
Next i

resultval = 1234

The right answer for this question is "css reset".

* {
    margin: 0;
    padding: 0;
}

It removes all default margin and padding for every object on the page, no holds barred, regardless of browser.

Simply, App.config is an XML based file format that holds the Application Level Configurations.

Example:

<?xml version="1.0"?>
<configuration>
  <appSettings>
    <add key="key" value="test" />
  </appSettings>
</configuration>

You can access the configurations by using ConfigurationManager as shown in the piece of code snippet below:

var value = System.Configuration.ConfigurationManager.AppSettings["key"];
// value is now "test"

Note: ConfigurationSettings is obsolete method to retrieve configuration information.

var value = System.Configuration.ConfigurationSettings.AppSettings["key"];

HTML 4 does not make it explicit. The current HTML5 working draft specifies that the first submit button must be the default:

A form element's default button is the first submit button in tree order whose form owner is that form element.

If the user agent supports letting the user submit a form implicitly (for example, on some platforms hitting the "enter" key while a text field is focused implicitly submits the form), then doing so for a form whose default button has a defined activation behavior must cause the user agent to run synthetic click activation steps on that default button.

The easiest way to add a text to a JFrame:

JFrame window = new JFrame("JFrame with text"); 
window.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
window.setLayout(new BorderLayout());
window.add(new JLabel("Hello World"), BorderLayout.CENTER);
window.pack();
window.setVisible(true);
window.setLocationRelativeTo(null);

I also got this error recently when using Anaconda on a Mac machine.

Here is what I found:

1. After running python3 -m pip install PyMySql, pymysql module is under /Library/Python/3.7/site-packages
2. Anaconda wants this module to be under /opt/anaconda3/lib/python3.8/site-packages

Therefore, after copying pymysql module to the designated path, it runs correctly.

Firstly this is a very good question.

400 Bad Request - When a critical piece of information is missing from the request

e.g. The authorization header or content type header. Which is absolutely required by the server to understand the request. This can differ from server to server.

422 Unprocessable Entity - When the request body can't be parsed.

This is less severe than 400. The request has reached the server. The server has acknowledged the request has got the basic structure right. But the information in the request body can't be parsed or understood.

e.g. Content-Type: application/xml when request body is JSON.

Here's an article listing status codes and its use in REST APIs. https://metamug.com/article/status-codes-for-rest-api.php

The key difference is that Objects only support string and Symbol keys where as Maps support more or less any key type.

If I do obj[123] = true and then Object.keys(obj) then I will get ["123"] rather than [123]. A Map would preserve the type of the key and return [123] which is great. Maps also allow you to use Objects as keys. Traditionally to do this you would have to give objects some kind of unique identifier to hash them (I don't think I've ever seen anything like getObjectId in JS as part of the standard). Maps also guarantee preservation of order so are all round better for preservation and can sometimes save you needing to do a few sorts.

Between maps and objects in practice there are several pros and cons. Objects gain both advantages and disadvantages being very tightly integrated into the core of JavaScript which sets them apart from significantly Map beyond the difference in key support.

An immediate advantage is that you have syntactical support for Objects making it easy to access elements. You also have direct support for it with JSON. When used as a hash it's annoying to get an object without any properties at all. By default if you want to use Objects as a hash table they will be polluted and you will often have to call hasOwnProperty on them when accessing properties. You can see here how by default Objects are polluted and how to create hopefully unpolluted objects for use as hashes:

({}).toString
    toString() { [native code] }
JSON.parse('{}').toString
    toString() { [native code] }
(Object.create(null)).toString
    undefined
JSON.parse('{}', (k,v) => (typeof v === 'object' && Object.setPrototypeOf(v, null) ,v)).toString
    undefined

Pollution on objects is not only something that makes code more annoying, slower, etc but can also have potential consequences for security.

Objects are not pure hash tables but are trying to do more. You have headaches like hasOwnProperty, not being able to get the length easily (Object.keys(obj).length) and so on. Objects are not meant to purely be used as hash maps but as dynamic extensible Objects as well and so when you use them as pure hash tables problems arise.

Comparison/List of various common operations:

    Object:
       var o = {};
       var o = Object.create(null);
       o.key = 1;
       o.key += 10;
       for(let k in o) o[k]++;
       var sum = 0;
       for(let v of Object.values(m)) sum += v;
       if('key' in o);
       if(o.hasOwnProperty('key'));
       delete(o.key);
       Object.keys(o).length
    Map:
       var m = new Map();
       m.set('key', 1);
       m.set('key', m.get('key') + 10);
       m.foreach((k, v) => m.set(k, m.get(k) + 1));
       for(let k of m.keys()) m.set(k, m.get(k) + 1);
       var sum = 0;
       for(let v of m.values()) sum += v;
       if(m.has('key'));
       m.delete('key');
       m.size();

There are a few other options, approaches, methodologies, etc with varying ups and downs (performance, terse, portable, extendable, etc). Objects are a bit strange being core to the language so you have a lot of static methods for working with them.

Besides the advantage of Maps preserving key types as well as being able to support things like objects as keys they are isolated from the side effects that objects much have. A Map is a pure hash, there's no confusion about trying to be an object at the same time. Maps can also be easily extended with proxy functions. Object's currently have a Proxy class however performance and memory usage is grim, in fact creating your own proxy that looks like Map for Objects currently performs better than Proxy.

A substantial disadvantage for Maps is that they are not supported with JSON directly. Parsing is possible but has several hangups:

JSON.parse(str, (k,v) => {
    if(typeof v !== 'object') return v;
    let m = new Map();
    for(k in v) m.set(k, v[k]);
    return m;
});

The above will introduce a serious performance hit and will also not support any string keys. JSON encoding is even more difficult and problematic (this is one of many approaches):

// An alternative to this it to use a replacer in JSON.stringify.
Map.prototype.toJSON = function() {
    return JSON.stringify({
        keys: Array.from(this.keys()),
        values: Array.from(this.values())
    });
};

This is not so bad if you're purely using Maps but will have problems when you are mixing types or using non-scalar values as keys (not that JSON is perfect with that kind of issue as it is, IE circular object reference). I haven't tested it but chances are that it will severely hurt performance compared to stringify.

Other scripting languages often don't have such problems as they have explicit non-scalar types for Map, Object and Array. Web development is often a pain with non-scalar types where you have to deal with things like PHP merges Array/Map with Object using A/M for properties and JS merges Map/Object with Array extending M/O. Merging complex types is the devil's bane of high level scripting languages.

So far these are largely issues around implementation but performance for basic operations is important as well. Performance is also complex because it depends on engine and usage. Take my tests with a grain of salt as I cannot rule out any mistake (I have to rush this). You should also run your own tests to confirm as mine examine only very specific simple scenarios to give a rough indication only. According to tests in Chrome for very large objects/maps the performance for objects is worse because of delete which is apparently somehow proportionate to the number of keys rather than O(1):

Object Set Took: 146
Object Update Took: 7
Object Get Took: 4
Object Delete Took: 8239
Map Set Took: 80
Map Update Took: 51
Map Get Took: 40
Map Delete Took: 2

Chrome clearly has a strong advantage with getting and updating but the delete performance is horrific. Maps use a tiny amount more memory in this case (overhead) but with only one Object/Map being tested with millions of keys the impact of overhead for maps is not expressed well. With memory management objects also do seem to free earlier if I am reading the profile correctly which might be one benefit in favor of objects.

In Firefox for this particular benchmark it is a different story:

Object Set Took: 435
Object Update Took: 126
Object Get Took: 50
Object Delete Took: 2
Map Set Took: 63
Map Update Took: 59
Map Get Took: 33
Map Delete Took: 1

I should immediately point out that in this particular benchmark deleting from objects in Firefox is not causing any problems, however in other benchmarks it has caused problems especially when there are many keys just as in Chrome. Maps are clearly superior in Firefox for large collections.

However this is not the end of the story, what about many small objects or maps? I have done a quick benchmark of this but not an exhaustive one (setting/getting) of which performs best with a small number of keys in the above operations. This test is more about memory and initialization.

Map Create: 69    // new Map
Object Create: 34 // {}

Again these figures vary but basically Object has a good lead. In some cases the lead for Objects over maps is extreme (~10 times better) but on average it was around 2-3 times better. It seems extreme performance spikes can work both ways. I only tested this in Chrome and creation to profile memory usage and overhead. I was quite surprised to see that in Chrome it appears that Maps with one key use around 30 times more memory than Objects with one key.

For testing many small objects with all the above operations (4 keys):

Chrome Object Took: 61
Chrome Map Took: 67
Firefox Object Took: 54
Firefox Map Took: 139

In terms of memory allocation these behaved the same in terms of freeing/GC but Map used 5 times more memory. This test used 4 keys where as in the last test I only set one key so this would explain the reduction in memory overhead. I ran this test a few times and Map/Object are more or less neck and neck overall for Chrome in terms of overall speed. In Firefox for small Objects there is a definite performance advantage over maps overall.

This of course doesn't include the individual options which could vary wildly. I would not advice micro-optimizing with these figures. What you can get out of this is that as a rule of thumb, consider Maps more strongly for very large key value stores and objects for small key value stores.

Beyond that the best strategy with these two it to implement it and just make it work first. When profiling it is important to keep in mind that sometimes things that you wouldn't think would be slow when looking at them can be incredibly slow because of engine quirks as seen with the object key deletion case.

Like this:

<video width="300" height="200" autoplay="autoplay">
  <source src="video/supercoolvideo.mp4" type="video/mp4" />
</video>

controls is a boolean attribute:

Note: The values "true" and "false" are not allowed on boolean attributes. To represent a false value, the attribute has to be omitted altogether.

Here's the code I came up with to remove items selected by a user from a listbox It seems to work ok in a multiselect listbox (selectionmode prop is set to multiextended).:

Private Sub cmdRemoveList_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles cmdRemoveList.Click
    Dim knt As Integer = lstwhatever.SelectedIndices.Count
    Dim i As Integer
    For i = 0 To knt - 1
        lstwhatever.Items.RemoveAt(lstwhatever.SelectedIndex)
    Next
End Sub

I had this error aswell.

I am working in mysql workbench. When giving the values they have to be inside "". That solved it for me.

Just type mongod instead of ./mongod. It works for me.

If you would like nicely auto-formatted code. Try CTRL + A + K + F. While holding down CTRL hit a, then k, then f.

To Wrap TD text

First set table style

table{
    table-layout: fixed;
}

then set TD Style

td{
    word-wrap:break-word
}