This can be done with MySQL, although it's highly unintuitive:

CREATE PROCEDURE p25 (OUT return_val INT)
BEGIN
  DECLARE a,b INT;
  DECLARE cur_1 CURSOR FOR SELECT s1 FROM t;
  DECLARE CONTINUE HANDLER FOR NOT FOUND
  SET b = 1;
  OPEN cur_1;
  REPEAT
    FETCH cur_1 INTO a;
    UNTIL b = 1
  END REPEAT;
  CLOSE cur_1;
  SET return_val = a;
END;//

Check out this guide: mysql-storedprocedures.pdf

// can be considered an alias to math.floor() for divisions with return value of type float. It operates as no-op for divisions with return value of type int.

import math
# let's examine `float` returns
# -------------------------------------
# divide
>>> 1.0 / 2
0.5
# divide and round down
>>> math.floor(1.0/2)
0.0
# divide and round down
>>> 1.0 // 2
0.0

# now let's examine `integer` returns
# -------------------------------------
>>> 1/2
0
>>> 1//2
0

In your case, breaking the hash algorithm is equivalent to finding a collision in the hash algorithm. That means you don't need to find the password itself (which would be a preimage attack), you just need to find an output of the hash function that is equal to the hash of a valid password (thus "collision"). Finding a collision using a birthday attack takes O(2^(n/2)) time, where n is the output length of the hash function in bits.

SHA-2 has an output size of 512 bits, so finding a collision would take O(2^256) time. Given there are no clever attacks on the algorithm itself (currently none are known for the SHA-2 hash family) this is what it takes to break the algorithm.

To get a feeling for what 2^256 actually means: currently it is believed that the number of atoms in the (entire!!!) universe is roughly 10^80 which is roughly 2^266. Assuming 32 byte input (which is reasonable for your case - 20 bytes salt + 12 bytes password) my machine takes ~0,22s (~2^-2s) for 65536 (=2^16) computations. So 2^256 computations would be done in 2^240 * 2^16 computations which would take

2^240 * 2^-2 = 2^238 ~ 10^72s ~ 3,17 * 10^64 years

Even calling this millions of years is ridiculous. And it doesn't get much better with the fastest hardware on the planet computing thousands of hashes in parallel. No human technology will be able to crunch this number into something acceptable.

So forget brute-forcing SHA-256 here. Your next question was about dictionary words. To retrieve such weak passwords rainbow tables were used traditionally. A rainbow table is generally just a table of precomputed hash values, the idea is if you were able to precompute and store every possible hash along with its input, then it would take you O(1) to look up a given hash and retrieve a valid preimage for it. Of course this is not possible in practice since there's no storage device that could store such enormous amounts of data. This dilemma is known as memory-time tradeoff. As you are only able to store so many values typical rainbow tables include some form of hash chaining with intermediary reduction functions (this is explained in detail in the Wikipedia article) to save on space by giving up a bit of savings in time.

Salts were a countermeasure to make such rainbow tables infeasible. To discourage attackers from precomputing a table for a specific salt it is recommended to apply per-user salt values. However, since users do not use secure, completely random passwords, it is still surprising how successful you can get if the salt is known and you just iterate over a large dictionary of common passwords in a simple trial and error scheme. The relationship between natural language and randomness is expressed as entropy. Typical password choices are generally of low entropy, whereas completely random values would contain a maximum of entropy.

The low entropy of typical passwords makes it possible that there is a relatively high chance of one of your users using a password from a relatively small database of common passwords. If you google for them, you will end up finding torrent links for such password databases, often in the gigabyte size category. Being successful with such a tool is usually in the range of minutes to days if the attacker is not restricted in any way.

That's why generally hashing and salting alone is not enough, you need to install other safety mechanisms as well. You should use an artificially slowed down entropy-enducing method such as PBKDF2 described in PKCS#5 and you should enforce a waiting period for a given user before they may retry entering their password. A good scheme is to start with 0.5s and then doubling that time for each failed attempt. In most cases users don't notice this and don't fail much more often than three times on average. But it will significantly slow down any malicious outsider trying to attack your application.

On my Macintosh systems, I find that "Adobe Reader" does a reasonably good job. I created an alias on my Desktop that points to the "Adobe Reader.app", and all I do is drop a pdf-file on the alias, which makes it the active document in Adobe Reader, and then from the File-menu, I choose "Save as Text...", give it a name and where to save it, click "Save", and I'm done.

If you're dealing with natural language text and need to replace a word, not just part of a string, you have to add a pinch of regular expressions to your gsub as a plain text substitution can lead to disastrous results:

'mislocated cat, vindicating'.gsub('cat', 'dog')
=> "mislodoged dog, vindidoging"

Regular expressions have word boundaries, such as \b which matches start or end of a word. Thus,

'mislocated cat, vindicating'.gsub(/\bcat\b/, 'dog')
=> "mislocated dog, vindicating"

In Ruby, unlike some other languages like Javascript, word boundaries are UTF-8-compatible, so you can use it for languages with non-Latin or extended Latin alphabets:

'???? ? ??????, ??? ??????'.gsub(/\b????\b/, '?????')
=> "????? ? ??????, ??? ??????"

The HTC devices have the PCSII.apk which allow them to select usb connect mode. For your device, you can set it manually:

Use SQLite Editor to open /data/data/com.android.providers.setting/databases/settings.db

open table secure

turn settings starting with mount_ums_ to 0, then restart devices.

UPDATE: If it still doesn't work, try turning on debug mode.

You need to seed the random number generator, from man 3 rand

If no seed value is provided, the rand() function is automatically seeded with a value of 1.

and

The srand() function sets its argument as the seed for a new sequence of pseudo-random integers to be returned by rand(). These sequences are repeatable by calling srand() with the same seed value.

e.g.

srand(time(NULL));

I have met the same issue today. After trying various method, I realize that just put the code of sizing inside $(window).load(function() {}) instead of document.ready would solve part of issue (if you are not ajaxing the page).

This worked for me:

const Routes = createStackNavigator({
Intro: {
    screen: Intro,
    navigationOptions: {
        header: null,
    }
}
},
    {
        initialRouteName: 'Intro',
    }
);

In java8 you no longer need to use Collections.sort method as LinkedList inherits the method sort from java.util.List, so adapting Fido's answer to Java8:

    LinkedList<String>list = new LinkedList<String>();
    list.add("abc");
    list.add("Bcd");
    list.add("aAb");

    list.sort( new Comparator<String>(){
    @Override
        public int compare(String o1,String o2){
            return Collator.getInstance().compare(o1,o2);
        }
    });

References:

http://docs.oracle.com/javase/8/docs/api/java/util/LinkedList.html

http://docs.oracle.com/javase/7/docs/api/java/util/List.html

I will go for Inner Join in this context. If I would have used contains, it would iterate 6 times despite if the fact that there are just one match.

var desiredNames = new[] { "Pankaj", "Garg" }; 

var people = new[]  
{  
    new { FirstName="Pankaj", Surname="Garg" },  
    new { FirstName="Marc", Surname="Gravell" },  
    new { FirstName="Jeff", Surname="Atwood" }  
}; 

var records = (from p in people join filtered in desiredNames on p.FirstName equals filtered  select p.FirstName).ToList(); 

Disadvantages of Contains

Suppose I have two list objects.

List 1      List 2
  1           12
  2            7
  3            8
  4           98
  5            9
  6           10
  7            6

Using Contains, it will search for each List 1 item in List 2 that means iteration will happen 49 times !!!

I had the same problem and I solved it by using an absolute import instead of a relative one.

for example in your case, you will write something like this:

from app.mymodule import myclass

You can see in the documentation.

Note that relative imports are based on the name of the current module. Since the name of the main module is always "__main__", modules intended for use as the main module of a Python application must always use absolute imports.

Try this:

vi.setBackgroundColor(Color.parseColor("#FFFF0000"));

Like that:

$ command >>output 2>>error

Hopefully this isn't a duplicate answer, but what I like to do is generate a sql statement within a sql statement that will allow me to search for the values I am looking for (not just the tables with those field names ( as it's usually necessary for me to then delete any info related to the id of the column name I am looking for):

  SELECT  'Select * from ' + t.name + ' where ' + c.name + ' = 148' AS SQLToRun
  FROM sys.columns c, c.name as ColName, t.name as TableName
  JOIN sys.tables t 
     ON c.object_id = t.object_id
  WHERE c.name LIKE '%ProjectID%'

Then I can copy and paste run my 1st column "SQLToRun"... then I replace the "Select * from ' with 'Delete from ' and it allows me to delete any references to that given ID! Write these results to file so you have them just in case.

NOTE**** Make sure you eliminate any bakup tables prior to running your your delete statement...

  SELECT  'Delete from ' + t.name + ' where ' + c.name + ' = 148' AS SQLToRun
  FROM sys.columns c, c.name as ColName, t.name as TableName
  JOIN sys.tables t 
     ON c.object_id = t.object_id
  WHERE c.name LIKE '%ProjectID%'

var mystr = "Doe";
mystr = "John " + mystr;

Wouldn't this work for you?

Try the following:

$('select').change(function(){
  alert($(this).children('option:selected').data('id'));
});

Your change subscriber subscribes to the change event of the select, so the this parameter is the select element. You need to find the selected child to get the data-id from.

Please see my answer here:

https://stackoverflow.com/a/24844618/2293304

It's a long and ugly, but reliable and efficient solution.

It resolves a few problems which are not addressed by the other answerers:

• It correctly handles symbolic links, including not calling shutil.rmtree() on a symbolic link (which will pass the os.path.isdir() test if it links to a directory).
• It handles read-only files nicely.

Hi if you are having dropdownlist like this

<select id="testID">
<option value="1">Value1</option>
<option value="2">Value2</option>
<option value="3">Value3</option>
<option value="4">Value4</option>
<option value="5">Value5</option>
<option value="6">Value6</option>
</select>
<input type="button" value="Get dropdown selected Value" onclick="getHTML();">

after giving id to dropdownlist you just need to add jquery code like this

function getHTML()
{
      var display=$('#testID option:selected').html();
      alert(display);
}

Check your git repo before committing

gitrepo/.git/hooks/commit-msg

if this file is not present in that location then you will get this error "missing Change-Id in commit message" .

To solve this just copy paste the commit hook in .git folder.

Granted, this isn't going to provide you anything truly meaningful unless the objects have properly overriden ToString() (or you're not really working with a generic list of objects and can bind to specific fields):

List<object> objList = new List<object>();

// Fill the list

someListBox.DataSource = objList;

Unfortunately, the Color class constructor in Flutter does not accept a simple hexadecimal string (like #bfeb91 in CSS).

Instead, it requires an integer like 0xFFBFEB91.

So here is we convert a hex string to an integer

A simple function

Give this function a hex string and it will return you a Color!

Color _getColorFromHex(String hexColor) {
  hexColor = hexColor.replaceAll("#", "");
  if (hexColor.length == 6) {
    hexColor = "FF" + hexColor;
  }
  if (hexColor.length == 8) {
    return Color(int.parse("0x$hexColor"));
  }
}

Use it like this

Text(
  'Hello World',
  style: TextStyle(backgroundColor: _getColorFromHex('ff00aa')), // or 'bfeb91', or 'ffbfeb91'
),

As a String extension

Leveraging the power of Dart extensions we can augment String with a function that returns a Color:

extension ColorExtension on String {
  toColor() {
    var hexColor = this.replaceAll("#", "");
    if (hexColor.length == 6) {
      hexColor = "FF" + hexColor;
    }
    if (hexColor.length == 8) {
      return Color(int.parse("0x$hexColor"));
    }
  }
}

Use it like this

Text(
  'Hello World',
  style: TextStyle(backgroundColor: '#bfeb91'.toColor()), // or 'bfeb91', or 'ffbfeb91'
),

I have created a pub-sub sample here:

http://www.syntaxsuccess.com/viewarticle/pub-sub-in-angular-2.0

The idea is to use RxJs Subjects to wire up an Observer and and Observables as a generic solution for emitting and subscribing to custom events. In my sample I use a customer object for demo purposes

this.pubSubService.Stream.emit(customer);

this.pubSubService.Stream.subscribe(customer => this.processCustomer(customer));

Here is a live demo as well: http://www.syntaxsuccess.com/angular-2-samples/#/demo/pub-sub

Use a process group so as to enable sending a signal to all the process in the groups. For that, you should attach a session id to the parent process of the spawned/child processes, which is a shell in your case. This will make it the group leader of the processes. So now, when a signal is sent to the process group leader, it's transmitted to all of the child processes of this group.

Here's the code:

import os
import signal
import subprocess

# The os.setsid() is passed in the argument preexec_fn so
# it's run after the fork() and before  exec() to run the shell.
pro = subprocess.Popen(cmd, stdout=subprocess.PIPE, 
                       shell=True, preexec_fn=os.setsid) 

os.killpg(os.getpgid(pro.pid), signal.SIGTERM)  # Send the signal to all the process groups

showhide.html

<!DOCTYPE html>
<html>
    <head>
      <script type="text/javascript">
        function showHide(switchTextDiv, showHideDiv)
        {
          var std = document.getElementById(switchTextDiv);
          var shd = document.getElementById(showHideDiv);
          if (shd.style.display == "block")
          {
            shd.style.display = "none";
            std.innerHTML = "<span style=\"display: block; background-color: yellow\">Show</span>"; 
          }
          else
          {
            if (shd.innerHTML.length <= 0)
            {
              shd.innerHTML = "<object width=\"100%\" height=\"100%\" type=\"text/html\" data=\"showhide_embedded.html\"></object>";
            }
            shd.style.display = "block";
            std.innerHTML = "<span style=\"display: block; background-color: yellow\">Hide</span>";
          }
        }
      </script>
    </head>
    <body>
      <a id="switchTextDiv1" href="javascript:showHide('switchTextDiv1', 'showHideDiv1')">
        <span style="display: block; background-color: yellow">Show</span>
      </a>
      <div id="showHideDiv1" style="display: none; width: 100%; height: 300px"></div>
    </body>
</html>

showhide_embedded.html

<!DOCTYPE html>
<html>
    <head>
      <script type="text/javascript"> 
        function load()
        {
          var ts = document.getElementById("theString");
          ts.scrollIntoView(true);
        }
      </script>
    </head>
    <body onload="load()">
      <pre>
        some text 1
        some text 2
        some text 3
        some text 4
        some text 5
        <span id="theString" style="background-color: yellow">some text 6 highlight</span>
        some text 7
        some text 8
        some text 9
      </pre>
    </body>
</html>

Probably the jstl libraries are missing from your classpath/not accessible by tomcat.

You need to add at least the following jar files in your WEB-INF/lib directory:

• jsf-impl.jar
• jsf-api.jar
• jstl.jar

Use below functions to encode bitmap into byte[] and vice versa

public static String encodeTobase64(Bitmap image) {
    Bitmap immagex = image;
    ByteArrayOutputStream baos = new ByteArrayOutputStream();
    immagex.compress(Bitmap.CompressFormat.PNG, 90, baos);
    byte[] b = baos.toByteArray();
    String imageEncoded = Base64.encodeToString(b, Base64.DEFAULT);
    return imageEncoded;
}

public static Bitmap decodeBase64(String input) {
    byte[] decodedByte = Base64.decode(input, 0);
    return BitmapFactory.decodeByteArray(decodedByte, 0, decodedByte.length);
}

Even though you define android:onClick = "DoIt" in XML, you need to make sure your activity (or view context) has public method defined with exact same name and View as parameter. Android wires your definitions with this implementation in activity. At the end, implementation will have same code which you wrote in anonymous inner class. So, in simple words instead of having inner class and listener attachement in activity, you will simply have a public method with implementation code.

From my expierience with win8.1 npm installs modules on C:\Users\[UserName]\AppData\Roaming\npm\node_modules but dumply searches them on C:\Users\[UserName]\node_modules.

One simple solution reference module in application by full path:

var jsonminify = require("C:/Users/Saulius/AppData/Roaming/npm/node_modules/jsonminify");

The shortest version I found is to use the --cat option of parallel like below. This version avoids using xargs, only relying on features of parallel:

cat files.txt | \
  parallel -n 500 --lb --pipe --cat rsync --files-from={} user@remote:/dir /dir -avPi

#### Arg explainer
# -n 500           :: split input into chunks of 500 entries
#
# --cat            :: create a tmp file referenced by {} containing the 500 
#                     entry content for each process
#
# user@remote:/dir :: the root relative to which entries in files.txt are considered
#
# /dir             :: local root relative to which files are copied

Sample content from files.txt:

/dir/file-1
/dir/subdir/file-2
....

Note that this doesn't use -j 50 for job count, that didn't work on my end here. Instead I've used -n 500 for record count per job, calculated as a reasonable number given the total number of records.

That is because of server SQL Mode - NO_ZERO_DATE.

From the reference: NO_ZERO_DATE - In strict mode, don't allow '0000-00-00' as a valid date. You can still insert zero dates with the IGNORE option. When not in strict mode, the date is accepted but a warning is generated.

you can specify fields like this:

LOAD XML LOCAL INFILE '/pathtofile/file.xml' 
INTO TABLE my_tablename(personal_number, firstname, ...); 

You can use the iterator that is returned by the begin() method of the map template:

std::map<K,V> myMap;
std::pair<K,V> firstEntry = *myMap.begin()

But remember that the std::map container stores its content in an ordered way. So the first entry is not always the first entry that has been added.

console.log specifically is a method for developers to write code to inconspicuously inform the developers what the code is doing. It can be used to alert you that there's an issue, but shouldn't take the place of an interactive debugger when it comes time to debug the code. Its asynchronous nature means that the logged values don't necessarily represent the value when the method was called.

In short: log errors with console.log (if available), then fix the errors using your debugger of choice: Firebug, WebKit Developer Tools (built-in to Safari and Chrome), IE Developer Tools or Visual Studio.

The "Base-Path" for Mysql is stored in /etc/my.cnf which is not updated when you do brew upgrade. Just open it and change the basedir value

For example, change this:

[mysqld]
basedir=/Users/3st/homebrew/Cellar/mysql/5.6.13

to point to the new version:

[mysqld]
basedir=/Users/3st/homebrew/Cellar/mysql/5.6.19

Restart mysql with:

mysql.server start

Include 'use strict'; as the first statement in a wrapping function, so it only affects that function. This prevents problems when concatenating scripts that aren't strict.

See Douglas Crockford's latest blog post Strict Mode Is Coming To Town.

Example from that post:

(function () {
   'use strict';
   // this function is strict...
}());

(function () {
   // but this function is sloppy...
}());

Update: In case you don't want to wrap in immediate function (e.g. it is a node module), then you can disable the warning.

For JSLint (per Zhami):

/*jslint node: true */

For JSHint:

/*jshint strict:false */

or (per Laith Shadeed)

/* jshint -W097 */

To disable any arbitrary warning from JSHint, check the map in JSHint source code (details in docs).

Update 2: JSHint supports node:boolean option. See .jshintrc at github.

/* jshint node: true */

//Get Only number from string
$string = "123 Hello Zahid";
$res = preg_replace("/[^0-9]/", "", $string);
echo $res."<br>";
//Result 123

The message is clear: you have a repeated column in the mapping. That means you mapped the same database column twice. And indeed, you have:

@Column(nullable=false)
private Long customerId;

and also:

@ManyToOne(optional=false)
@JoinColumn(name="customerId",referencedColumnName="id_customer")
private Customer customer;

(and the same goes for productId/product).

You shouldn't reference other entities by their ID, but by a direct reference to the entity. Remove the customerId field, it's useless. And do the same for productId. If you want the customer ID of a sale, you just need to do this:

sale.getCustomer().getId()

The short answer:

echo "some data for the file" >> fileName

However, echo doesn't deal with end of line characters (EOFs) in an ideal way. So, if you're gonna append more than one line, do it with printf:

printf "some data for the file\nAnd a new line" >> fileName

The >> and > operators are very useful for redirecting output of commands, they work with multiple other bash commands.

y_prob = model.predict(x) 
y_classes = y_prob.argmax(axis=-1)

As suggested here.

What about -mmin?

find /var/www/html/audio -daystart -maxdepth 1 -mmin +59 -type f -name "*.mp3" \
    -exec rm -f {} \;

From man find:

-mmin n
        File's data was last modified n minutes ago.

Also, make sure to test this first!

... -exec echo rm -f '{}' \;
          ^^^^ Add the 'echo' so you just see the commands that are going to get
               run instead of actual trying them first.

QPython

I use the QPython app. It's free and includes a code editor, an interactive interpreter and a package manager, allowing you to create and execute Python programs directly on your device.

I had the same problem because I was using port 80 instead of 8080 in the settings.xml proxy configuration

# Preface: File is json with contents: {'name': 'Android', 'status': 'ERROR'}

import boto3
import io

s3 = boto3.resource('s3')

obj = s3.Object('my-bucket', 'key-to-file.json')
data = io.BytesIO()
obj.download_fileobj(data)

# object is now a bytes string, Converting it to a dict:
new_dict = json.loads(data.getvalue().decode("utf-8"))

print(new_dict['status']) 
# Should print "Error"

Following two flags worked for me. They will clear all the previous activities and start a new one

  Intent intent = new Intent(getApplicationContext(), MyDetails.class);
  intent.addFlags(Intent.FLAG_ACTIVITY_CLEAR_TASK);
  intent.addFlags(Intent.FLAG_ACTIVITY_NEW_TASK);
  startActivity(intent);

Hope this helps.

what that worked for me:

go to the fodler

C:\Users\{YOUR PC USER NAME}\AppData\Local\Programs\Python\Python37-32\Lib\site-packages 

and either delete or change the name of the PIL folder and DONE.

had to do it after running

pip uninstall PIL

as other suggested yielded for me

WARNING: Skipping PIL as it is not installed.

But I am not sure about the consequences of removing that library so I will edit this post if I ever get into a problem because of that.

First of all, you need not do var r = this; as this in if statement refers to the context of the callback itself which since you are using arrow function refers to the React component context.

According to the docs:

history objects typically have the following properties and methods:

• length - (number) The number of entries in the history stack
• action - (string) The current action (PUSH, REPLACE, or POP)

• location - (object) The current location. May have the following properties:

  • pathname - (string) The path of the URL
  • search - (string) The URL query string
  • hash - (string) The URL hash fragment
  • state - (string) location-specific state that was provided to e.g. push(path, state) when this location was pushed onto the stack. Only available in browser and memory history.
• push(path, [state]) - (function) Pushes a new entry onto the history stack
• replace(path, [state]) - (function) Replaces the current entry on the history stack
• go(n) - (function) Moves the pointer in the history stack by n entries
• goBack() - (function) Equivalent to go(-1)
• goForward() - (function) Equivalent to go(1)
• block(prompt) - (function) Prevents navigation

So while navigating you can pass props to the history object like

this.props.history.push({
  pathname: '/template',
  search: '?query=abc',
  state: { detail: response.data }
})

or similarly for the Link component or the Redirect component

<Link to={{
      pathname: '/template',
      search: '?query=abc',
      state: { detail: response.data }
    }}> My Link </Link>

and then in the component which is rendered with /template route, you can access the props passed like

this.props.location.state.detail

Also keep in mind that, when using history or location objects from props you need to connect the component with withRouter.

As per the Docs:

withRouter

You can get access to the history object’s properties and the closest <Route>'s match via the withRouter higher-order component. withRouter will re-render its component every time the route changes with the same props as <Route> render props: { match, location, history }.

If you want a dynamically sized array, then you should make a list. Not only will you get the .Add() functionality, but as @frode-f explains, dynamic arrays are more memory efficient and a better practice anyway.

And it's so easy to use.

Instead of your array declaration, try this:

$outItems = New-Object System.Collections.Generic.List[System.Object]

Adding items is simple.

$outItems.Add(1)
$outItems.Add("hi")

And if you really want an array when you're done, there's a function for that too.

$outItems.ToArray()

I had a very close issue but in my case, it was Identifier 'e' has already been declared.

In my case caused because of using try {} catch (e) { var e = ... } where letter e is generated via minifier (uglifier).

So better solution could be use catch(ex){} (ex as an Excemption)

Hope somebody who searched with the similar question could find this question helpful.

GCC does

1. for -ve - > Arithmetic Shift

2. For +ve -> Logical Shift

onMeasure() is your opportunity to tell Android how big you want your custom view to be dependent the layout constraints provided by the parent; it is also your custom view's opportunity to learn what those layout constraints are (in case you want to behave differently in a match_parent situation than a wrap_content situation). These constraints are packaged up into the MeasureSpec values that are passed into the method. Here is a rough correlation of the mode values:

• EXACTLY means the layout_width or layout_height value was set to a specific value. You should probably make your view this size. This can also get triggered when match_parent is used, to set the size exactly to the parent view (this is layout dependent in the framework).
• AT_MOST typically means the layout_width or layout_height value was set to match_parent or wrap_content where a maximum size is needed (this is layout dependent in the framework), and the size of the parent dimension is the value. You should not be any larger than this size.
• UNSPECIFIED typically means the layout_width or layout_height value was set to wrap_content with no restrictions. You can be whatever size you would like. Some layouts also use this callback to figure out your desired size before determine what specs to actually pass you again in a second measure request.

The contract that exists with onMeasure() is that setMeasuredDimension() MUST be called at the end with the size you would like the view to be. This method is called by all the framework implementations, including the default implementation found in View, which is why it is safe to call super instead if that fits your use case.

Granted, because the framework does apply a default implementation, it may not be necessary for you to override this method, but you may see clipping in cases where the view space is smaller than your content if you do not, and if you lay out your custom view with wrap_content in both directions, your view may not show up at all because the framework doesn't know how large it is!

Generally, if you are overriding View and not another existing widget, it is probably a good idea to provide an implementation, even if it is as simple as something like this:

@Override
protected void onMeasure(int widthMeasureSpec, int heightMeasureSpec) {

    int desiredWidth = 100;
    int desiredHeight = 100;

    int widthMode = MeasureSpec.getMode(widthMeasureSpec);
    int widthSize = MeasureSpec.getSize(widthMeasureSpec);
    int heightMode = MeasureSpec.getMode(heightMeasureSpec);
    int heightSize = MeasureSpec.getSize(heightMeasureSpec);

    int width;
    int height;

    //Measure Width
    if (widthMode == MeasureSpec.EXACTLY) {
        //Must be this size
        width = widthSize;
    } else if (widthMode == MeasureSpec.AT_MOST) {
        //Can't be bigger than...
        width = Math.min(desiredWidth, widthSize);
    } else {
        //Be whatever you want
        width = desiredWidth;
    }

    //Measure Height
    if (heightMode == MeasureSpec.EXACTLY) {
        //Must be this size
        height = heightSize;
    } else if (heightMode == MeasureSpec.AT_MOST) {
        //Can't be bigger than...
        height = Math.min(desiredHeight, heightSize);
    } else {
        //Be whatever you want
        height = desiredHeight;
    }

    //MUST CALL THIS
    setMeasuredDimension(width, height);
}

Hope that Helps.

Socket connections in Android are the same as in Java: http://www.oracle.com/technetwork/java/socket-140484.html

Things you need to be aware of:

1. If phone goes to sleep your app will no longer execute, so socket will eventually timeout. You can prevent this with wake lock. This will eat devices battery tremendously - I know I wouldn't use that app.
2. If you do this constantly, even when your app is not active, then you need to use Service.
3. Activities and Services can be killed off by OS at any time, especially if they are part of an inactive app.

Take a look at AlarmManager, if you need scheduled execution of your code.

Do you need to run your code and receive data even if user does not use the app any more (i.e. app is inactive)?

What you've seen is what you get - and it's exactly what you asked for, here:

(ppc, c) => new { productproductcategory = ppc, category = c}

That's a lambda expression returning an anonymous type with those two properties.

In your CategorizedProducts, you just need to go via those properties:

CategorizedProducts catProducts = query.Select(
      m => new { 
             ProdId = m.productproductcategory.product.Id, 
             CatId = m.category.CatId, 
             // other assignments 
           });

Assuming you use VS Express and C#. The icon is set in the project properties page. To open it right click on the project name in the solution explorer. in the page that opens, there is an Application tab, in this tab you can set the icon.

Many answers are already there, I just need to identify one difference which is not there.

for loop is fail-safe while foreach loop is fail-fast.

Fail-fast iteration throws ConcurrentModificationException if iteration and modification are done at the same time in object.

However, fail-safe iteration keeps the operation safe from failing even if the iteration goes in infinite loop.

public class ConcurrentModification {
    public static void main(String[] args) {
        List<String> str = new ArrayList<>();

        for(int i=0; i<1000; i++){
            str.add(String.valueOf(i));
        }

        /**
         * this for loop is fail-safe. It goes into infinite loop but does not fail. 
         */
        for(int i=0; i<str.size(); i++){
            System.out.println(str.get(i));
            str.add(i+ "  " + "10");
        }

        /**
         * throws ConcurrentModificationexception 
        for(String st: str){
            System.out.println(st);
            str.add("10");
        }
        */

        /* throws ConcurrentModificationException 
         Iterator<String> itr = str.iterator();
        while(itr.hasNext()) {
            System.out.println(itr.next());
            str.add("10");
        }*/
    }
} 

Hope this helps to understand the difference between for and foreach loop through different angle.

I found a good blog to go through the differences between fail-safe and fail-fast, if anyone interested:

If possible, use NumberUtils in Apache Commons Lang - plenty of great utilities there.

https://commons.apache.org/proper/commons-lang/javadocs/api-3.1/org/apache/commons/lang3/math/NumberUtils.html#max(int[])

NumberUtils.max(int[])

A way to write a common subset of HTML and XHTML

In the hope of greater portability.

In HTML, <script> is magic escapes everything until </script> appears.

So you can write:

<script>x = '<br/>';

and <br/> won't be considered a tag.

This is why strings such as:

x = '</scripts>'

must be escaped like:

x = '</scri' + 'pts>'

See: Why split the <script> tag when writing it with document.write()?

But XML (and thus XHTML, which is a "subset" of XML, unlike HTML), doesn't have that magic: <br/> would be seen as a tag.

<![CDATA[ is the XHTML way to say:

don't parse any tags until the next ]]>, consider it all a string

The // is added to make the CDATA work well in HTML as well.

In HTML <![CDATA[ is not magic, so it would be run by JavaScript. So // is used to comment it out.

The XHTML also sees the //, but will observe it as an empty comment line which is not a problem:

//

That said:

• compliant browsers should recognize if the document is HTML or XHTML from the initial doctype <!DOCTYPE html> vs <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.1//EN" "http://www.w3.org/TR/xhtml11/DTD/xhtml11.dtd">
• compliant websites could rely on compliant browsers, and coordinate doctype with a single valid script syntax

But that violates the golden rule of the Internet:

don't trust third parties, or your product will break

Dim psValue As String = "1,5,12,34,123,12"
psValue = psValue.Substring(0, psValue.LastIndexOf(","))

output:

1,5,12,34,123

This worked for me, can also be "borrowed" from the design view, make changes -> right click -> generate change script.

BEGIN TRANSACTION
GO
ALTER TABLE dbo.YOURTABLE ADD
    YOURCOLUMN bit NOT NULL CONSTRAINT DF_YOURTABLE_YOURCOLUMN DEFAULT 0
GO
COMMIT

I show below an iterative solution. A recursive solution would be more compact, but since we don't know the length of the lists, recursion runs the risk of stack overflow.

The basic idea is similar to the merge step in merge sort; we keep a pointer corresponding to each input list; at each iteration, we advance the pointer corresponding to the smaller element. However, there's one crucial difference where most people get tripped. In merge sort, since we use a result array, the next position to insert is always the index of the result array. For a linked list, we need to keep a pointer to the last element of the sorted list. The pointer may jump around from one input list to another depending on which one has the smaller element for the current iteration.

With that, the following code should be self-explanatory.

public ListNode mergeTwoLists(ListNode l1, ListNode l2) {
    if (l1 == null) {
        return l2;
    }
    if (l2 == null) {
        return l1;
    }
    ListNode first = l1;
    ListNode second = l2;
    ListNode head = null;
    ListNode last = null;

    while (first != null && second != null) {
        if (first.val < second.val) {
            if (last != null) {
                last.next = first;
            }
            last = first;
            first = first.next;
        } else {
            if (last != null) {
                last.next = second;
            }
            last = second;
            second = second.next;
        }
        if (head == null) {
            head = last;
        }
    }

    if (first == null) {
        last.next = second;
    }
    if (second == null) {
        last.next = first;
    }

    return head;
}

string input = "America.USA"
string output = input.Substring(input.IndexOf('.') + 1);

This iterator form is 10-15% faster than using integer indexing:

# python2 only
if str is bytes:
    from itertools import izip as zip

def is_sorted(l):
    return all(a <= b for a, b in zip(l, l[1:]))

Place ojdbc6.jar in your project resources folder of eclipse. then add the following dependency code in your pom.xml

<dependency>
<groupId> oracle </groupId>
 <artifactId>ojdbc6</artifactId>
 <version>11.2.0</version>
  <scope>system</scope>
  <systemPath>${project.basedir}/src/main/resources/ojdbc6.jar</systemPath>
</dependency>

Sometimes changing document.body.innerHTML breaks some JS scripts on page. Here is version, that only changes content of text elements:

function replace(element, from, to) {
    if (element.childNodes.length) {
        element.childNodes.forEach(child => replace(child, from, to));
    } else {
        const cont = element.textContent;
        if (cont) element.textContent = cont.replace(from, to);
    }
};

replace(document.body, new RegExp("hello", "g"), "hi");

You can do this using two approaches:

1. Using Application class

2. Using Shared Preferences

3. Using Application class

Example:

class SessionManager extends Application{

  String sessionKey;

  setSessionKey(String key){
    this.sessionKey=key;
  }

  String getSessisonKey(){
    return this.sessionKey;
  }
}

You can use above class to implement login in your MainActivity as below. Code will look something like this:

@override 
public void onCreate (Bundle savedInstanceState){
  // you will this key when first time login is successful.
  SessionManager session= (SessionManager)getApplicationContext();
  String key=getSessisonKey.getKey();
  //Use this key to identify whether session is alive or not.
}

This method will work for temporary storage. You really do not any idea when operating system is gonna kill the application, because of low memory. When your application is in background and user is navigating through other application which demands more memory to run, then your application will be killed since operating system given more priority to foreground processes than background. Hence your application object will be null before user logs out. Hence for this I recommend to use second method Specified above.

2. Using shared preferences.

   String MYPREF="com.your.application.session"
   
   SharedPreferences pref= context.getSharedPreferences(MyPREF,MODE_PRIVATE);
   
   //Insert key as below:
   
   Editot editor= pref.edit();
   
   editor.putString("key","value");
   
   editor.commit();
   
   //Get key as below.
   
   SharedPreferences sharedPref = getActivity().getPreferences(Context.MODE_PRIVATE);
   
   String key= getResources().getString("key");
   

You need then a wrapping element with the bg image and in it the content element with the bg color:

<div id="Wrapper">
  <div id="Content">
    <!-- content here -->
  </div>
</div>

and the css:

#Wrapper{
    background:url(../img/bg/diagonalnoise.png); 
    width:300px; 
    height:300px;
}

#Content{
    background-color:rgba(248,247,216,0.7); 
    width:100%; 
    height:100%;
}

LENGTH() returns the length of the string measured in bytes.
CHAR_LENGTH() returns the length of the string measured in characters.

This is especially relevant for Unicode, in which most characters are encoded in two bytes. Or UTF-8, where the number of bytes varies. For example:

select length(_utf8 '€'), char_length(_utf8 '€')
--> 3, 1

As you can see the Euro sign occupies 3 bytes (it's encoded as 0xE282AC in UTF-8) even though it's only one character.

TL;DR

Just returning response()->json($promotion) won't solve the issue in this question. $promotion is an Eloquent object, which Laravel will automatically json_encode for the response. The json encoding is failing because of the img property, which is a PHP stream resource, and cannot be encoded.

Details

Whatever you return from your controller, Laravel is going to attempt to convert to a string. When you return an object, the object's __toString() magic method will be invoked to make the conversion.

Therefore, when you just return $promotion from your controller action, Laravel is going to call __toString() on it to convert it to a string to display.

On the Model, __toString() calls toJson(), which returns the result of json_encode. Therefore, json_encode is returning false, meaning it is running into an error.

Your dd shows that your img attribute is a stream resource. json_encode cannot encode a resource, so this is probably causing the failure. You should add your img attribute to the $hidden property to remove it from the json_encode.

class Promotion extends Model
{
    protected $hidden = ['img'];

    // rest of class
}

I know it's waaay late, but it did take me 2 minutes to write this optimized and improved version of AgileJon's answer:

var key, obj, prop, owns = Object.prototype.hasOwnProperty;

for (key in validation_messages ) {

    if (owns.call(validation_messages, key)) {

        obj = validation_messages[key];

        for (prop in obj ) {

            // using obj.hasOwnProperty might cause you headache if there is
            // obj.hasOwnProperty = function(){return false;}
            // but owns will always work 
            if (owns.call(obj, prop)) {
                console.log(prop, "=", obj[prop]);
            }

        }

    }

}

SELECT  DISTINCT *
FROM    people
WHERE   names = 'Smith'
ORDER BY
        names
LIMIT 10

The servlet container's implementation of HttpServlet.service() method will automatically forward to doGet() or doPost() as necessary, so you shouldn't need to override the service method.

Swift 2 and below

let date = NSDate()
var dateFormatter = NSDateFormatter()
dateFormatter.dateFormat = "MM-dd-yyyy"
var dateString = dateFormatter.stringFromDate(date)
println(dateString)

And in Swift 3 and higher this would now be written as:

let date = Date()
let dateFormatter = DateFormatter()
dateFormatter.dateFormat = "MM-dd-yyyy"
var dateString = dateFormatter.string(from: date)

If you have start-stop-daemon

start-stop-daemon --start --quiet -u username -g usergroup --exec command ...

Your syntax is fine, it will return rows where LastAdDate lies within the last 6 months;

select cast('01-jan-1970' as datetime) as LastAdDate into #PubAdvTransData 
    union select GETDATE()
    union select NULL
    union select '01-feb-2010'

DECLARE @sp_Date DATETIME = DateAdd(m, -6, GETDATE())

SELECT * FROM #PubAdvTransData pat
     WHERE (pat.LastAdDate > @sp_Date)

>2010-02-01 00:00:00.000
>2010-04-29 21:12:29.920

Are you sure LastAdDate is of type DATETIME?

One more efficient implementation

int i, j;

/* new length of modified array */
int NewLength = 1;

for(i=1; i< Length; i++){

   for(j=0; j< NewLength ; j++)
   {

      if(array[i] == array[j])
      break;
   }

   /* if none of the values in index[0..j] of array is not same as array[i],
      then copy the current value to corresponding new position in array */

  if (j==NewLength )
      array[NewLength++] = array[i];
}

In this implementation there is no need for sorting the array. Also if a duplicate element is found, there is no need for shifting all elements after this by one position.

The output of this code is array[] with size NewLength

Here we are starting from the 2nd elemt in array and comparing it with all the elements in array up to this array. We are holding an extra index variable 'NewLength' for modifying the input array. NewLength variabel is initialized to 0.

Element in array[1] will be compared with array[0]. If they are different, then value in array[NewLength] will be modified with array[1] and increment NewLength. If they are same, NewLength will not be modified.

So if we have an array [1 2 1 3 1], then

In First pass of 'j' loop, array[1] (2) will be compared with array0, then 2 will be written to array[NewLength] = array[1] so array will be [1 2] since NewLength = 2

In second pass of 'j' loop, array[2] (1) will be compared with array0 and array1. Here since array[2] (1) and array0 are same loop will break here. so array will be [1 2] since NewLength = 2

and so on

The closest equivalent are the Windows Scheduled Tasks (Control Panel -> Scheduled Tasks), though they are a far, far cry from cron.

The biggest difference (to me) is that they require a user to be logged into the Windows box, and a user account (with password and all), which makes things a nightmare if your local security policy requires password changes periodically. I also think it is less flexible than cron as far as setting intervals for items to run.

There are already great answers about the advantages of using list initialization, however my personal rule of thumb is NOT to use curly braces whenever possible, but instead make it dependent on the conceptual meaning:

• If the object I'm creating conceptually holds the values I'm passing in the constructor (e.g. containers, POD structs, atomics, smart pointers etc.), then I'm using the braces.
• If the constructor resembles a normal function call (it performs some more or less complex operations that are parametrized by the arguments) then I'm using the normal function call syntax.
• For default initialization I always use curly braces.
  For one, that way I'm always sure that the object gets initialized irrespective of whether it e.g. is a "real" class with a default constructor that would get called anyway or a builtin / POD type. Second it is - in most cases - consistent with the first rule, as a default initialized object often represents an "empty" object.

In my experience, this ruleset can be applied much more consistently than using curly braces by default, but having to explicitly remember all the exceptions when they can't be used or have a different meaning than the "normal" function-call syntax with parenthesis (calls a different overload).

It e.g. fits nicely with standard library-types like std::vector:

vector<int> a{10,20};   //Curly braces -> fills the vector with the arguments

vector<int> b(10,20);   //Parentheses -> uses arguments to parametrize some functionality,                          
vector<int> c(it1,it2); //like filling the vector with 10 integers or copying a range.

vector<int> d{};      //empty braces -> default constructs vector, which is equivalent
                      //to a vector that is filled with zero elements

There is a similar problem.it is a tomcat digital signature.

$ gpg --verify apache-tomcat-9.0.16-windows-x64.zip.asc apache-tomcat-9.0.16-windows- 
x64.zip
gpg: Signature made 2019?02? 5?  0:32:50
gpg:                using RSA key A9C5DF4D22E99998D9875A5110C01C5A2F6059E7
gpg: Can't check signature: No public key

but then I use the RSA key it provided to receive the public key to verify.

$ gpg --receive-keys A9C5DF4D22E99998D9875A5110C01C5A2F6059E7
gpg: key 10C01C5A2F6059E7: 38 signatures not checked due to missing keys
gpg: key 10C01C5A2F6059E7: public key "Mark E D Thomas <[email protected]>" imported
gpg: no ultimately trusted keys found
gpg: Total number processed: 1
gpg:               imported: 1

Then successfully.

$ gpg --verify apache-tomcat-9.0.16-windows-x64.zip.asc
gpg: assuming signed data in 'apache-tomcat-9.0.16-windows-x64.zip'
gpg: Signature made 2019?02? 5?  0:32:50
gpg:                using RSA key A9C5DF4D22E99998D9875A5110C01C5A2F6059E7
gpg: Good signature from "Mark E D Thomas <[email protected]>" [unknown]
gpg: WARNING: This key is not certified with a trusted signature!
gpg:          There is no indication that the signature belongs to the owner.
Primary key fingerprint: A9C5 DF4D 22E9 9998 D987  5A51 10C0 1C5A 2F60 59E7

There is a hidden cost in removing elements from an ArrayList. Each time you delete an element, you need to move the elements to fill the "hole". On average, this will take N / 2 assignments for a list with N elements.

So removing M elements from an N element ArrayList is O(M * N) on average. An O(N) solution involves creating a new list. For example.

List data = ...;
List newData = new ArrayList(data.size()); 

for (Iterator i = data.iterator(); i.hasNext(); ) {
    Object element = i.next();

    if ((...)) {
        newData.add(element);
    }
}

If N is large, my guess is that this approach will be faster than the remove approach for values of M as small as 3 or 4.

But it is important to create newList large enough to hold all elements in list to avoid copying the backing array when it is expanded.

Dojo does, e.g. via JsonRestStore, see http://www.sitepen.com/blog/2008/06/13/restful-json-dojo-data/ .

Dictionary:

• It returns/throws Exception if we try to find a key which does not exist.

• It is faster than a Hashtable because there is no boxing and unboxing.

• Only public static members are thread safe.

• Dictionary is a generic type which means we can use it with any data type (When creating, must specify the data types for both keys and values).

  Example: Dictionary<string, string> <NameOfDictionaryVar> = new Dictionary<string, string>();

• Dictionay is a type-safe implementation of Hashtable, Keys and Values are strongly typed.

Hashtable:

• It returns null if we try to find a key which does not exist.

• It is slower than dictionary because it requires boxing and unboxing.

• All the members in a Hashtable are thread safe,

• Hashtable is not a generic type,

• Hashtable is loosely-typed data structure, we can add keys and values of any type.

According to the grammar in the CSP spec, you need to specify schemes as scheme:, not just scheme. So, you need to change the image source directive to:

img-src 'self' data:;

Is the standard procedure not working?

• make changes
• git stash save
• git branch xxx HEAD
• git checkout xxx
• git stash pop

Shorter:

• make changes
• git stash
• git checkout -b xxx
• git stash pop

The below code helps to get the details of elements from the specific form with the form id,

$('#formId input, #formId select').each(
    function(index){  
        var input = $(this);
        alert('Type: ' + input.attr('type') + 'Name: ' + input.attr('name') + 'Value: ' + input.val());
    }
);

The below code helps to get the details of elements from all the forms which are place in the loading page,

$('form input, form select').each(
    function(index){  
        var input = $(this);
        alert('Type: ' + input.attr('type') + 'Name: ' + input.attr('name') + 'Value: ' + input.val());
    }
);

The below code helps to get the details of elements which are place in the loading page even when the element is not place inside the tag,

$('input, select').each(
    function(index){  
        var input = $(this);
        alert('Type: ' + input.attr('type') + 'Name: ' + input.attr('name') + 'Value: ' + input.val());
    }
);

NOTE: We add the more element tag name what we need in the object list like as below,

Example: to get name of attribute "textarea",

$('input, select, textarea').each(
    function(index){  
        var input = $(this);
        alert('Type: ' + input.attr('type') + 'Name: ' + input.attr('name') + 'Value: ' + input.val());
    }
);

I posted my solution here.

This is a way to delete an array element without copying to another array - just in frame of the same array instance:

    public static void RemoveAt<T>(ref T[] arr, int index)
    {
        for (int a = index; a < arr.Length - 1; a++)
        {
            // moving elements downwards, to fill the gap at [index]
            arr[a] = arr[a + 1];
        }
        // finally, let's decrement Array's size by one
        Array.Resize(ref arr, arr.Length - 1);
    }

This is an old question, and I know its asking specifically about adding a script tag into the head, however based on the OPs explanation they actually just intend to execute some JS code which has been obtained via some other JS function.

This is much simpler than adding a script tag into the page.

Simply:

eval(decoded);

Eval will execute a string of JS in-line, without any need to add it to the DOM at all.

I don't think there's ever really a need to add an in-line script tag to the DOM after page load.

More info here: http://www.w3schools.com/jsref/jsref_eval.asp

Try Tixik.com and their API there. They have a very different data that big players, really good coverage mostly in Europe and good API conditions.

As mentioned in other answer, best solution is using

parse_url()

You need to use combination of parse_url() and parse_str().

The parse_url() parse URL and return its components that you can get query string using query key. Then you should use parse_str() that parse query string and return values into variable.

$url = "https://example.com/test/1234?basic=2&[email protected]";
parse_str(parse_url($url)['query'], $params);
echo $params['email']; // [email protected]

Also you can do this work using regex.

preg_match()

You can use preg_match() to get specific value of query string from URL.

preg_match("/&?email=([^&]+)/", $url, $matches);
echo $matches[1]; // [email protected]

preg_replace()

Also you can use preg_replace() to do this work in one line!

$email = preg_replace("/^https?:\/\/.*\?.*email=([^&]+).*$/", "$1", $url);
// [email protected]

You can simply put "." the dot sign. I've had a cmd application that was requiring the path and I was already in the needed directory and I used the dot symbol.

Hope it helps.

I want to thank the most upvoted answer for giving me the idea of my own problem basically the variation of it with arrow function and passing param from child component:

 class Parent extends React.Component {
  constructor(props) {
    super(props)
    // without bind, replaced by arrow func below
  }

  handler = (val) => {
    this.setState({
      someVar: val
    })
  }

  render() {
    return <Child handler = {this.handler} />
  }
}

class Child extends React.Component {
  render() {
    return <Button onClick = {() => this.props.handler('the passing value')}/ >
  }
}

Hope it helps someone.

The previous answers either suggest custom renderers or require you to keep track of the selected item either in your data objects or otherwise. This isn't really required, there is a way to link to the functioning of the ListView in a platform agnostic way. This can then be used to change the selected item in any way required. Colors can be modified, different parts of the cell shown or hidden depending on the selected state.

Let's add an IsSelected property to our ViewCell. There is no need to add it to the data object; the listview selects the cell, not the bound data.

public partial class SelectableCell : ViewCell {

  public static readonly BindableProperty IsSelectedProperty = BindableProperty.Create(nameof(IsSelected), typeof(bool), typeof(SelectableCell), false, propertyChanged: OnIsSelectedPropertyChanged);
  public bool IsSelected {
    get => (bool)GetValue(IsSelectedProperty);
    set => SetValue(IsSelectedProperty, value);
  }

  // You can omit this if you only want to use IsSelected via binding in XAML
  private static void OnIsSelectedPropertyChanged(BindableObject bindable, object oldValue, object newValue) {
    var cell = ((SelectableCell)bindable);
    // change color, visibility, whatever depending on (bool)newValue
  }

  // ...
}

To create the missing link between the cells and the selection in the list view, we need a converter (the original idea came from the Xamarin Forum):

public class IsSelectedConverter : IValueConverter {
  public object Convert(object value, Type targetType, object parameter, CultureInfo culture) =>
    value != null && value == ((ViewCell)parameter).View.BindingContext;

  public object ConvertBack(object value, Type targetType, object parameter, CultureInfo culture) =>
    throw new NotImplementedException();
}

We connect the two using this converter:

<ListView x:Name="ListViewName">
  <ListView.ItemTemplate>
    <DataTemplate>
      <local:SelectableCell x:Name="ListViewCell"
        IsSelected="{Binding SelectedItem, Source={x:Reference ListViewName}, Converter={StaticResource IsSelectedConverter}, ConverterParameter={x:Reference ListViewCell}}" />
    </DataTemplate>
  </ListView.ItemTemplate>
</ListView>

This relatively complex binding serves to check which actual item is currently selected. It compares the SelectedItem property of the list view to the BindingContext of the view in the cell. That binding context is the data object we actually bind to. In other words, it checks whether the data object pointed to by SelectedItem is actually the data object in the cell. If they are the same, we have the selected cell. We bind this into to the IsSelected property which can then be used in XAML or code behind to see if the view cell is in the selected state.

There is just one caveat: if you want to set a default selected item when your page displays, you need to be a bit clever. Unfortunately, Xamarin Forms has no page Displayed event, we only have Appearing and this is too early for setting the default: the binding won't be executed then. So, use a little delay:

protected override async void OnAppearing() {
  base.OnAppearing();

  Device.BeginInvokeOnMainThread(async () => {
    await Task.Delay(100);
    ListViewName.SelectedItem = ...;
  });
}

The definition of an inline function doesn't have to be in a header file but, because of the one definition rule (ODR) for inline functions, an identical definition for the function must exist in every translation unit that uses it.

The easiest way to achieve this is by putting the definition in a header file.

If you want to put the definition of a function in a single source file then you shouldn't declare it inline. A function not declared inline does not mean that the compiler cannot inline the function.

Whether you should declare a function inline or not is usually a choice that you should make based on which version of the one definition rules it makes most sense for you to follow; adding inline and then being restricted by the subsequent constraints makes little sense.

Short version: it's marking that hash as attached to the current package namespace (so that that package provides its class implementation).

Meteor is a framework built ontop of node.js. It uses node.js to deploy but has several differences.

The key being it uses its own packaging system instead of node's module based system. It makes it easy to make web applications using Node. Node can be used for a variety of things and on its own is terrible at serving up dynamic web content. Meteor's libraries make all of this easy.

You are looking for display:

document.getElementById("endTimeLabel").style.display = 'none';
document.getElementById("endTimeLabel").style.display = 'block';

Edit: You could also easily reuse your validation function.

HTML:

<span id="startDateLabel">Start date/time: </span>
<input id="startDateStr" name="startDateStr" size="8" onchange="if (!formatDate(this,'USA')) {this.value = '';}" />
<button id="startDateCalendarTrigger">...</button>
<input id="startDateTime" type="text" size="8" name="startTime" value="12:00 AM" onchange="validateHHMM(this.value, 'startTimeLabel');"/>
<label id="startTimeLabel" class="errorMsg">Time must be entered in the format HH:MM AM/PM</label><br />

<span id="endDateLabel">End date/time: </span>
<input id="endDateStr" name="endDateStr" size="8" onchange="if (!formatDate(this,'USA')) {this.value = '';}" />
<button id="endDateCalendarTrigger">...</button>

<input id="endDateTime" type="text" size="8" name="endTime" value="12:00 AM" onchange="validateHHMM(this.value, 'endTimeLabel');"/>
<label id="endTimeLabel" class="errorMsg">Time must be entered in the format HH:MM AM/PM</label>

Javascript:

function validateHHMM(value, message) {
    var isValid = /^(0?[1-9]|1[012])(:[0-5]\d) [APap][mM]$/.test(value);

    if (isValid) {
        document.getElementById(message).style.display = "none";
    }else {
        document.getElementById(message).style.display= "inline";
    }

    return isValid;
}

Live DEMO

In Future if anyone comes here using, Navigation Drawer Activity (provided by Studio in Activity Prompt window)

The answer is -

Use this before OnCreate() in MainActivity

int[][] state = new int[][] {
        new int[] {android.R.attr.state_checked}, // checked
        new int[] {-android.R.attr.state_checked}
};

int[] color = new int[] {
        Color.rgb(255,46,84),
        (Color.BLACK)
};

ColorStateList csl = new ColorStateList(state, color);

int[][] state2 = new int[][] {
        new int[] {android.R.attr.state_checked}, // checked
        new int[] {-android.R.attr.state_checked}
};

int[] color2 = new int[] {
        Color.rgb(255,46,84),
        (Color.GRAY)
};

ColorStateList csl2 = new ColorStateList(state2, color2);

and use this in onNavigationItemSelected() in MainActivity (you dont need to Write this function if you use Navigation Drawer activity, it will be added in MainActivity).

 NavigationView nav = (NavigationView) findViewById(R.id.nav_view);
    nav.setItemTextColor(csl);
    nav.setItemIconTintList(csl2);
    nav.setItemBackgroundResource(R.color.white);

Tip - add this code before If else Condition in onNavigationItemSelected()

Stop the MySQL process.

Start the MySQL process with the --skip-grant-tables option.

Start the MySQL console client with the -u root option.

List all the users;

SELECT * FROM mysql.user;

Reset password;

UPDATE mysql.user SET Password=PASSWORD('[password]') WHERE User='[username]';

But DO NOT FORGET to

Stop the MySQL process

Start the MySQL Process normally (i.e. without the --skip-grant-tables option)

when you are finished. Otherwise, your database's security could be compromised.

Try this from the command line to change the git config details.

git config --global --replace-all user.name "Your New Name"

git config --global --replace-all user.email "Your new email"

There are various ways of changing the status bar color.

1) Using the styles.xml. You can use the android:statusBarColor attribute to do this the easy but static way.

Note: You can also use this attribute with the Material theme.

<?xml version="1.0" encoding="utf-8"?>
<resources>
    <style name="AppTheme" parent="AppTheme.Base">
        <item name="android:statusBarColor">@android:color/transparent</item>
    </style>
</resources>

2) You can get it done dynamically using the setStatusBarColor(int) method in the Window class. But remember that this method is only available for API 21 or higher. So be sure to check that, or your app will surely crash in lower devices.

Here is a working example of this method.

if (Build.VERSION.SDK_INT >= 21) {
            Window window = getWindow();
            window.addFlags(WindowManager.LayoutParams.FLAG_DRAWS_SYSTEM_BAR_BACKGROUNDS);
            window.clearFlags(WindowManager.LayoutParams.FLAG_TRANSLUCENT_STATUS);
            window.setStatusBarColor(getResources().getColor(R.color.primaryDark));
}

where primaryDark is the 700 tint of the primary color I am using in my app. You can define this color in the colors.xml file.

Do give it a try and let me know if you have any questions. Hope it helps.

Try to declare UseHttpGet over your method.

[ScriptMethod(UseHttpGet = true)]
public string HelloWorld()
{
    return "Hello World";
}

It seems that your question is quite answered, but i have an approach that may simplify you case:

I had a similar issue trying to return string data from mysql, even configuring both database and php to return strings formatted to utf-8. The only way i got the error was actually returning them from the database.

Finally, sailing through the web i found a really easy way to deal with it:

Giving that you can save all those types of string data in your mysql in different formats and collations, what you only need to do is, right at your php connection file, set the collation to utf-8, like this:

$connection = new mysqli($server, $user, $pass, $db);
$connection->set_charset("utf8");

Wich means that first you save the data in any format or collation and you convert it only at the return to your php file.

Hope it was helpful!

Actually, I do like mark instruction but little differently. I've added C:\Program Files (x86)\GnuWin32\bin\ to the Path variable, and try to run it with type awk using cmd.

Hope it works.

Both John Conde's and ryeballar's answers are correct and will work.

If you want to get too geeky:

• John's has the downside that it has to make two decisions per $digest loop (it has to decide whether to add/remove center and it has to decide whether to add/remove left), when clearly only one is needed.

• Ryeballar's relies on the ternary operator which is probably going to be removed at some point (because the view should not contain any logic). (We can't be sure it will indeed be removed and it probably won't be any time soon, but if there is a more "safe" solution, why not ?)

So, you can do the following as an alternative:

ng-class="{true:'center',false:'left'}[page.isSelected(1)]"

Use the New Java File classes in Java >=7.

Create the below method and import the necessary libs.

public static void copyFile( File from, File to ) throws IOException {
    Files.copy( from.toPath(), to.toPath() );
} 

Use the created method as below within main:

File dirFrom = new File(fileFrom);
File dirTo = new File(fileTo);

try {
        copyFile(dirFrom, dirTo);
} catch (IOException ex) {
        Logger.getLogger(TestJava8.class.getName()).log(Level.SEVERE, null, ex);
}

NB:- fileFrom is the file that you want to copy to a new file fileTo in a different folder.

Credits - @Scott: Standard concise way to copy a file in Java?

Intl.NumberFormat

var number = 3500;
alert(new Intl.NumberFormat().format(number));
// ? "3,500" if in US English locale

or phpjs.com/functions/number_format

The octothorpe/number-sign/hashmark has a special significance in an URL, it normally identifies the name of a section of a document. The precise term is that the text following the hash is the anchor portion of an URL. If you use Wikipedia, you will see that most pages have a table of contents and you can jump to sections within the document with an anchor, such as:

https://en.wikipedia.org/wiki/Alan_Turing#Early_computers_and_the_Turing_test

https://en.wikipedia.org/wiki/Alan_Turing identifies the page and Early_computers_and_the_Turing_test is the anchor. The reason that Facebook and other Javascript-driven applications (like my own Wood & Stones) use anchors is that they want to make pages bookmarkable (as suggested by a comment on that answer) or support the back button without reloading the entire page from the server.

In order to support bookmarking and the back button, you need to change the URL. However, if you change the page portion (with something like window.location = 'http://raganwald.com';) to a different URL or without specifying an anchor, the browser will load the entire page from the URL. Try this in Firebug or Safari's Javascript console. Load http://minimal-github.gilesb.com/raganwald. Now in the Javascript console, type:

window.location = 'http://minimal-github.gilesb.com/raganwald';

You will see the page refresh from the server. Now type:

window.location = 'http://minimal-github.gilesb.com/raganwald#try_this';

Aha! No page refresh! Type:

window.location = 'http://minimal-github.gilesb.com/raganwald#and_this';

Still no refresh. Use the back button to see that these URLs are in the browser history. The browser notices that we are on the same page but just changing the anchor, so it doesn't reload. Thanks to this behaviour, we can have a single Javascript application that appears to the browser to be on one 'page' but to have many bookmarkable sections that respect the back button. The application must change the anchor when a user enters different 'states', and likewise if a user uses the back button or a bookmark or a link to load the application with an anchor included, the application must restore the appropriate state.

So there you have it: Anchors provide Javascript programmers with a mechanism for making bookmarkable, indexable, and back-button-friendly applications. This technique has a name: It is a Single Page Interface.

p.s. There is a fourth benefit to this technique: Loading page content through AJAX and then injecting it into the current DOM can be much faster than loading a new page. In addition to the speed increase, further tricks like loading certain portions in the background can be performed under the programmer's control.

p.p.s. Given all of that, the 'bang' or exclamation mark is a further hint to Google's web crawler that the exact same page can be loaded from the server at a slightly different URL. See Ajax Crawling. Another technique is to make each link point to a server-accessible URL and then use unobtrusive Javascript to change it into an SPI with an anchor.

Here's the key link again: The Single Page Interface Manifesto

I recommend against using the jQuery code that was accepted as the answer. While it does not insert the string to decode into the page, it does cause things such as scripts and HTML elements to get created. This is way more code than we need. Instead, I suggest using a safer, more optimized function.

var decodeEntities = (function() {
  // this prevents any overhead from creating the object each time
  var element = document.createElement('div');

  function decodeHTMLEntities (str) {
    if(str && typeof str === 'string') {
      // strip script/html tags
      str = str.replace(/<script[^>]*>([\S\s]*?)<\/script>/gmi, '');
      str = str.replace(/<\/?\w(?:[^"'>]|"[^"]*"|'[^']*')*>/gmi, '');
      element.innerHTML = str;
      str = element.textContent;
      element.textContent = '';
    }

    return str;
  }

  return decodeHTMLEntities;
})();

http://jsfiddle.net/LYteC/4/

To use this function, just call decodeEntities("&") and it will use the same underlying techniques as the jQuery version will—but without jQuery's overhead, and after sanitizing the HTML tags in the input. See Mike Samuel's comment on the accepted answer for how to filter out HTML tags.

This function can be easily used as a jQuery plugin by adding the following line in your project.

jQuery.decodeEntities = decodeEntities;

Documentation on UISwitch says:

[mySwitch setOn:NO]; 

In Interface Builder, select your switch and in the Attributes inspector you'll find State which can be set to on or off.

its just a warning use:

error_reporting(0);

it shows when we do not initialize array and direct assigning value to indexes.

somefunction{
$raja[0]="this";
$raja[1]="that";
}

instead :

somefunction{
$raja=array(0=>'this',1='that');
//or
$raja=array("this","that");
}

it just notification, do not generate any output error or any unexpected output.

    using System;
    using System.IO.Ports;
    using System.Threading;

    namespace SerialReadTest
    {
        class SerialRead
        {
            static void Main(string[] args)
            {
        Console.WriteLine("Serial read init");
        SerialPort port = new SerialPort("COM6", 115200, Parity.None, 8, StopBits.One);
        port.Open();
        while(true){
          Console.WriteLine(port.ReadLine());
        }

    }
}
}

only working solution for me:

put it on the bottom of build.gradle

com.google.gms.googleservices.GoogleServicesPlugin.config.disableVersionCheck = true

As an additional answer (or to compound on the existing answers) you could write an extension method to accomplish this for you within the DirectoryInfo class. Here is a sample that I wrote fairly quickly that could be embellished to provide directory names or other criteria for modification, etc:

using System;
using System.Collections.Generic;
using System.IO;
using System.Linq;
using System.Text;

namespace DocumentDistributor.Library
{
    public static class myExtensions
    {
        public static string[] GetFileNamesWithoutFileExtensions(this DirectoryInfo di)
        {
            FileInfo[] fi = di.GetFiles();
            List<string> returnValue = new List<string>();

            for (int i = 0; i < fi.Length; i++)
            {
                returnValue.Add(Path.GetFileNameWithoutExtension(fi[i].FullName)); 
            }

            return returnValue.ToArray<string>();
         }
    }
}

Edit: I also think this method could probably be simplified or awesome-ified if it used LINQ to achieve the construction of the array, but I don't have the experience in LINQ to do it quickly enough for a sample of this kind.

Edit 2 (almost 4 years later): Here is the LINQ-ified method I would use:

public static class myExtensions
{
    public static IEnumerable<string> GetFileNamesWithoutExtensions(this DirectoryInfo di)
    {
        return di.GetFiles()
            .Select(x => Path.GetFileNameWithoutExtension(x.FullName));
    }
}

Adding to the above-accepted answer so that it helps those who are using tensorflow 2.0

import tensorflow as tf

# some data
c1 = tf.constant([[1, 1, 1], [2, 2, 2]], dtype=tf.float32)
c2 = tf.constant([[2, 2, 2], [3, 3, 3]], dtype=tf.float32)
c3 = tf.constant([[3, 3, 3], [4, 4, 4]], dtype=tf.float32)

# bake layers x1, x2, x3
x1 = tf.keras.layers.Dense(10)(c1)
x2 = tf.keras.layers.Dense(10)(c2)
x3 = tf.keras.layers.Dense(10)(c3)

# merged layer y1
y1 = tf.keras.layers.Concatenate(axis=1)([x1, x2])

# merged layer y2
y2 = tf.keras.layers.Concatenate(axis=1)([y1, x3])

# print info
print("-"*30)
print("x1", x1.shape, "x2", x2.shape, "x3", x3.shape)
print("y1", y1.shape)
print("y2", y2.shape)
print("-"*30)

Result:

------------------------------
x1 (2, 10) x2 (2, 10) x3 (2, 10)
y1 (2, 20)
y2 (2, 30)
------------------------------

Alternate solution

Create a column that will store the month:

data['month'] = data['date'].dt.month

Create a column that will store the year:

data['year'] = data['date'].dt.year

You are having this problem because you are attempting to console log app.address() before the connection has been made. You just have to be sure to console log after the connection is made, i.e. in a callback or after an event signaling that the connection has been made.

Fortunately, the 'listening' event is emitted by the server after the connection is made so just do this:

var express = require('express');
var http = require('http');

var app = express();
var server = http.createServer(app);

app.get('/', function(req, res) {
    res.send("Hello World!");
});

server.listen(3000, 'localhost');
server.on('listening', function() {
    console.log('Express server started on port %s at %s', server.address().port, server.address().address);
});

This works just fine in nodejs v0.6+ and Express v3.0+.

Try this way

UIActivityIndicatorView *activityIndicator = [[UIActivityIndicatorView alloc]initWithActivityIndicatorStyle:UIActivityIndicatorViewStyleGray];
    activityIndicator.frame = CGRectMake(10.0, 0.0, 40.0, 40.0);
    activityIndicator.center = super_view.center;
    [super_view addSubview: activityIndicator];

[activityIndicator startAnimating];

Very Easy way is to use toLocaleString() function

tot = Rs.1402598 //Result : Rs.1402598

tot.toLocaleString() //Result : Rs.1,402,598

Updated : 23/01/2021

The Variable Should be in number format. Example :

Number(tot).toLocaleString() //Result : Rs.1,402,598

You mean, like this:

grep -o '.\{0,20\}test_pattern.\{0,20\}' file

?

That will print up to twenty characters on either side of test_pattern. The \{0,20\} notation is like *, but specifies zero to twenty repetitions instead of zero or more.The -o says to show only the match itself, rather than the entire line.

Per the documentation, scipy.io.wavfile.read(somefile) returns a tuple of two items: the first is the sampling rate in samples per second, the second is a numpy array with all the data read from the file:

from scipy.io import wavfile
samplerate, data = wavfile.read('./output/audio.wav')

In the context of ASP.Net a Web API is a Controller whose base class is ApiController and does not use Views. A Web Service is a class derived from WebService and has automatic WSDL generation. By default it is a SOAP api, but you can also use JSON by adding a ScriptServiceAttribute.

Java date libraries are notoriously broken. I would advise to use Joda Time. It will take care of leap year, time zone and so on for you.

Minimal working example:

import java.util.Scanner;
import org.joda.time.DateTime;
import org.joda.time.Days;
import org.joda.time.LocalDate;
import org.joda.time.format.DateTimeFormat;
import org.joda.time.format.DateTimeFormatter;

public class DateTestCase {

    public static void main(String[] args) {

        System.out.print("Insert first date: ");
        Scanner s = new Scanner(System.in);
        String firstdate = s.nextLine();
        System.out.print("Insert second date: ");
        String seconddate = s.nextLine();

        // Formatter
        DateTimeFormatter dateStringFormat = DateTimeFormat
                .forPattern("dd MM yyyy");
        DateTime firstTime = dateStringFormat.parseDateTime(firstdate);
        DateTime secondTime = dateStringFormat.parseDateTime(seconddate);
        int days = Days.daysBetween(new LocalDate(firstTime),
                                    new LocalDate(secondTime)).getDays();
        System.out.println("Days between the two dates " + days);
    }
}

This maybe isn't as performant as the % answer, which prevents you from having to convert to a string first, but I haven't seen anyone post it yet, so here's another option that should work fine:

function isInteger(num) {
    return num.toString().indexOf('.') === -1;
}

There is far more efficient answer: just put the following instructions in the Form_Load:

Me.MinimumSize = New Size(Width, Height)
Me.MaximumSize = Me.MinimumSize

Use the combine function:

datetime.datetime.combine(date, time)

I spend a whole day organizing this information for my company since we are building a multi-lingual platform. If you find any issue, missing language, or incorrect charset please edit the list so it will be more useful in the future. Here is the complete list of all the language locales, names, and charsets.

For PHP array here is the link https://github.com/jerryurenaa/language-list/blob/main/language-list-array.php

for JSON here is the link https://github.com/jerryurenaa/language-list/blob/main/language-list-json.json

I searched many times for it, finally used custom timestamps like below:

$now = Carbon::now()->toDateTimeString();
Model::insert([
    ['name'=>'Foo', 'created_at'=>$now, 'updated_at'=>$now],
    ['name'=>'Bar', 'created_at'=>$now, 'updated_at'=>$now],
    ['name'=>'Baz', 'created_at'=>$now, 'updated_at'=>$now],
    ..................................
]);

For some reason, I need float property of a pseudo-element to be set to left or right for the image to appear. height and width of the pseudo-element should be both set but not in percentage. I'm on Firefox 67.

The given answer is far from complete. In fact, it is so far from complete that it tends to lead the reader to believe that this answer is OS dependent when it isn't. It also isn't something which is programming language dependent (as some commentators have suggested). I'm going to add more information in order to make this more clear. First, lets give the list of current new line variations (as in, what they've been since 1999):

• \r\n is only used on Windows Notepad, the DOS command line, most of the Windows API and in some (older) Windows apps.
• \n is used for all other systems, applications and the Internet.

You'll notice that I've put most Windows apps in the \n group which may be slightly controversial but before you disagree with this statement, please grab a UNIX formatted text file and try it in 10 web friendly Windows applications of your choice (which aren't listed in my exceptions above). What percentage of them handled it just fine? You'll find that they (practically) all implement auto detection of line endings or just use \n because, while Windows may use \r\n, the Internet uses \n. Therefore, it is best practice for applications to use \n alone if you want your output to be Internet friendly.

PHP also defines a newline character called PHP_EOL. This constant is set to the OS specific newline string for the machine PHP is running on (\r\n for Windows and \n for everything else). This constant is not very useful for webpages and should be avoided for HTML output or for writing most text to files. It becomes VERY useful when we move to command line output from PHP applications because it will allow your application to output to a terminal Window in a consistent manner across all supported OSes.

If you want your PHP applications to work from any server they are placed on, the two biggest things to remember are that you should always just use \n unless it is terminal output (in which case you use PHP_EOL) and you should also ALWAYS use / for your path separator (not \).

The even longer explanation:

An application may choose to use whatever line endings it likes regardless of the default OS line ending style. If I want my text editor to print a newline every time it encounters a period that is no harder than using the \n to represent a newline because I'm interpreting the text as I display it anyway. IOW, I'm fiddling around with measuring the width of each character so it knows where to display the next so it is very simple to add a statement saying that if the current char is a period then perform a newline action (or if it is a \n then display a period).

Aside from the null terminator, no character code is sacred and when you write a text editor or viewer you are in charge of translating the bits in your file into glyphs (or carriage returns) on the screen. The only thing that distinguishes a control character such as the newline from other characters is that most font sets don't include them (meaning they don't have a visual representation available).

That being said, if you are working at a higher level of abstraction then you probably aren't making your own textbox controls. If this is the case then you're stuck with whatever line ending that control makes available to you. Even in this case it is a simple matter to automatically detect the line ending style of any string and make the conversion before you load your text into the control and then undo it when you read from that control. Meaning, that if you're a desktop application dev and your application doesn't recognize \n as a newline then it isn't a very friendly application and you really have no excuse because it isn't hard to make it the right way. It also means that whomever wrote Notepad should be ashamed of himself because it really is very easy to do much better and so many people suffer through using it every day.

In my case, it was a missing line break that added unneeded parameters due to a bad copy and paste.

I followed a guide at https://pytorch.org/docs/stable/notes/windows.html#include-optional-components which looks like this when you copy it right here without any editing:

REM Make sure you have 7z and curl installed.

REM Download MKL files

curl https://s3.amazonaws.com/ossci-windows/mkl_2020.0.166.7z -k -O 7z x -aoa mkl_2020.0.166.7z -omkl

Output:

C:\Users\Admin>curl "https://s3.amazonaws.com/ossci-windows/mkl_2020.0.166.7z" -k -O 7z x
-aoa mkl_2020.0.166.7z -omkl   
% Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                               Dload  Upload   Total   Spent    Left  Speed 
100  103M  100  103M  0     0  5063k      0  0:00:21  0:00:21 --:--:-- 5629k
0     0    0     0    0     0      0      0 --:--:--  0:00:01 --:--:--     0curl: (6) Could not resolve host: 7z
0     0    0     0    0     0      0      0 --:--:--  0:00:01 --:--:--     0curl: (6) Could not resolve host: x 
curl: (6) Could not resolve host: mkl_2020.0.166.7z

There is actually a line break before "7z", with "7z" as the executable (and before, in addition to adding curl to your user PATH, you need to add 7z to the user PATH as well, for example with setx PATH "%PATH%;C:\Program Files\7-Zip\"):

REM Download MKL files

curl https://s3.amazonaws.com/ossci-windows/mkl_2020.0.166.7z -k -O

7z x -aoa mkl_2020.0.166.7z -omkl

WeasyPrint

pip install weasyprint  # No longer supports Python 2.x.

python
>>> import weasyprint
>>> pdf = weasyprint.HTML('http://www.google.com').write_pdf()
>>> len(pdf)
92059
>>> open('google.pdf', 'wb').write(pdf)

Your for loop looks good.

A possible while loop to accomplish the same thing:

int sum = 0;
int i = 1;
while (i <= 100) {
    sum += i;
    i++;
}
System.out.println("The sum is " + sum);

A possible do while loop to accomplish the same thing:

int sum = 0;
int i = 1;
do {
    sum += i;
    i++;
} while (i <= 100);
System.out.println("The sum is " + sum);

The difference between the while and the do while is that, with the do while, at least one iteration is sure to occur.

SELECT UPPER(firstname) FROM Person

SELECT LOWER(firstname) FROM Person

There is an important detail that has been omitted in the answer above.

MySQL imposes a limit of 65,535 bytes for the max size of each row. The size of a VARCHAR column is counted towards the maximum row size, while TEXT columns are assumed to be storing their data by reference so they only need 9-12 bytes. That means even if the "theoretical" max size of your VARCHAR field is 65,535 characters you won't be able to achieve that if you have more than one column in your table.

Also note that the actual number of bytes required by a VARCHAR field is dependent on the encoding of the column (and the content). MySQL counts the maximum possible bytes used toward the max row size, so if you use a multibyte encoding like utf8mb4 (which you almost certainly should) it will use up even more of your maximum row size.

Correction: Regardless of how MySQL computes the max row size, whether or not the VARCHAR/TEXT field data is ACTUALLY stored in the row or stored by reference depends on your underlying storage engine. For InnoDB the row format affects this behavior. (Thanks Bill-Karwin)

Reasons to use TEXT:

• If you want to store a paragraph or more of text
• If you don't need to index the column
• If you have reached the row size limit for your table

Reasons to use VARCHAR:

• If you want to store a few words or a sentence
• If you want to index the (entire) column
• If you want to use the column with foreign-key constraints

 <android.support.v7.widget.RecyclerView
        android:layout_width="wrap_content"
        android:layout_height="wrap_content"
        android:orientation="horizontal"
        app:layoutManager="android.support.v7.widget.LinearLayoutManager" />

you can access the children of a vuejs component with this.$children. if you want to use the query selector on the current component instance then this.$el.querySelector(...)

just doing a simple console.log(this) will show you all the properties of a vue component instance.

additionally if you know the element you want to access in your component, you can add the v-el:uniquename directive to it and access it via this.$els.uniquename

Immediately after the object is instantiatd, you can attach a property, say name, to the object and assign the string value you expect to it:

var myObj = new someClass();
myObj.name="myObj";

document.write(myObj.name);

Alternatively, the assignment can be made inside the codes of the class, i.e.

var someClass = function(P)
{ this.name=P;
  // rest of the class definition...
};

var myObj = new someClass("myObj");
document.write(myObj.name);

You can use this JavaScript function. Here you can display Redirection message to the user and redirected to the given URL.

<script type="text/javascript">   
    function Redirect() 
    {  
        window.location="http://www.newpage.com"; 
    } 
    document.write("You will be redirected to a new page in 5 seconds"); 
    setTimeout('Redirect()', 5000);   
</script>

ref.orderByChild("lead").startAt("Jack Nicholson").endAt("Jack Nicholson").listner....

This will work.

This stuff comes from ES file explorer

Just go into this app > settings

Then there is an option that says logging floating window, you just need to disable that and you will get rid of this infernal bubble for good

Just need to add: new SimpleDateFormat("bla bla bla", Locale.US)

public static void main(String[] args) throws ParseException {
    java.util.Date fecha = new java.util.Date("Mon Dec 15 00:00:00 CST 2014");
    DateFormat formatter = new SimpleDateFormat("EEE MMM dd HH:mm:ss Z yyyy", Locale.US);
    Date date;
    date = (Date)formatter.parse(fecha.toString());
    System.out.println(date);        

    Calendar cal = Calendar.getInstance();
    cal.setTime(date);
    String formatedDate = cal.get(Calendar.DATE) + "/" + 
            (cal.get(Calendar.MONTH) + 1) + 
            "/" +         cal.get(Calendar.YEAR);
    System.out.println("formatedDate : " + formatedDate);
}

You can try to use the options of --no-cache-dir together with -I to overwrite the cache of the previous version and install the new version. For example:

pip3 install --no-cache-dir -I tensorflow==1.1

Then use the following command to check the version of tensorflow:

python3 -c ‘import tensorflow as tf; print(tf.__version__)’

It should show the right version got installed.

You can use a Set implementation:

Some info from the JAVADoc:

A collection that contains no duplicate elements. More formally, sets contain no pair of elements e1 and e2 such that e1.equals(e2), and at most one null element. As implied by its name, this interface models the mathematical set abstraction.

Note: Great care must be exercised if mutable objects are used as set elements. The behavior of a set is not specified if the value of an object is changed in a manner that affects equals comparisons while the object is an element in the set. A special case of this prohibition is that it is not permissible for a set to contain itself as an element.`

These are the implementations:

• HashSet

  This class offers constant time performance for the basic operations (add, remove, contains and size), assuming the hash function disperses the elements properly among the buckets. Iterating over this set requires time proportional to the sum of the HashSet instance's size (the number of elements) plus the "capacity" of the backing HashMap instance (the number of buckets). Thus, it's very important not to set the initial capacity too high (or the load factor too low) if iteration performance is important.

  When iterating a HashSet the order of the yielded elements is undefined.

• LinkedHashSet

  Hash table and linked list implementation of the Set interface, with predictable iteration order. This implementation differs from HashSet in that it maintains a doubly-linked list running through all of its entries. This linked list defines the iteration ordering, which is the order in which elements were inserted into the set (insertion-order). Note that insertion order is not affected if an element is re-inserted into the set. (An element e is reinserted into a set s if s.add(e) is invoked when s.contains(e) would return true immediately prior to the invocation.)

  So, the output of the code above...

   Set<Integer> linkedHashSet = new LinkedHashSet<>();
   linkedHashSet.add(3);
   linkedHashSet.add(1);
   linkedHashSet.add(2);
  
   for (int i : linkedHashSet) {
       System.out.println(i);
   }
  

  ...will necessarily be

  3
  1
  2
  

• TreeSet

  This implementation provides guaranteed log(n) time cost for the basic operations (add, remove and contains). By default he elements returned on iteration are sorted by their "natural ordering", so the code above...

   Set<Integer> treeSet = new TreeSet<>();
   treeSet.add(3);
   treeSet.add(1);
   treeSet.add(2);
  
   for (int i : treeSet) {
       System.out.println(i);
   }
  

  ...will output this:

  1
  2
  3
  

  (You can also pass a Comparator instance to a TreeSet constructor, making it sort the elements in a different order.)

  Note that the ordering maintained by a set (whether or not an explicit comparator is provided) must be consistent with equals if it is to correctly implement the Set interface. (See Comparable or Comparator for a precise definition of consistent with equals.) This is so because the Set interface is defined in terms of the equals operation, but a TreeSet instance performs all element comparisons using its compareTo (or compare) method, so two elements that are deemed equal by this method are, from the standpoint of the set, equal. The behavior of a set is well-defined even if its ordering is inconsistent with equals; it just fails to obey the general contract of the Set interface.

To update the content of existing rows use the UPDATE statement:

UPDATE table_name SET table_column = 'test';

The Java 8 streams API lacks the features of getting the index of a stream element as well as the ability to zip streams together. This is unfortunate, as it makes certain applications (like the LINQ challenges) more difficult than they would be otherwise.

There are often workarounds, however. Usually this can be done by "driving" the stream with an integer range, and taking advantage of the fact that the original elements are often in an array or in a collection accessible by index. For example, the Challenge 2 problem can be solved this way:

String[] names = {"Sam", "Pamela", "Dave", "Pascal", "Erik"};

List<String> nameList =
    IntStream.range(0, names.length)
        .filter(i -> names[i].length() <= i)
        .mapToObj(i -> names[i])
        .collect(toList());

As I mentioned above, this takes advantage of the fact that the data source (the names array) is directly indexable. If it weren't, this technique wouldn't work.

I'll admit that this doesn't satisfy the intent of Challenge 2. Nonetheless it does solve the problem reasonably effectively.

EDIT

My previous code example used flatMap to fuse the filter and map operations, but this was cumbersome and provided no advantage. I've updated the example per the comment from Holger.

I've created a couple of map tutorials that will cover what you need

Animating the map describes howto create polylines based on a set of LatLngs. Using Google APIs on your map : Directions and Places describes howto use the Directions API and animate a marker along the path.

Take a look at these 2 tutorials and the Github project containing the sample app.

It contains some tips to make your code cleaner and more efficient:

• Using Google HTTP Library for more efficient API access and easy JSON handling.
• Using google-map-utils library for maps-related functions (like decoding the polylines)
• Animating markers

Ping is meant to be sent only from server to client, and browser should answer as soon as possible with Pong OpCode, automatically. So you have not to worry about that on higher level.

Although that not all browsers support standard as they suppose to, they might have some differences in implementing such mechanism, and it might even means there is no Pong response functionality. But personally I am using Ping / Pong, and never saw client that does not implement this type of OpCode and automatic response on low level client side implementation.

How do I read a string from input?

You can read a single, whitespace terminated word with std::cin like this:

#include<iostream>
#include<string>
using namespace std;

int main()
{
    cout << "Please enter a word:\n";

    string s;
    cin>>s;

    cout << "You entered " << s << '\n';
}

Note that there is no explicit memory management and no fixed-sized buffer that you could possibly overflow. If you really need a whole line (and not just a single word) you can do this:

#include<iostream>
#include<string>
using namespace std;

int main()
{
    cout << "Please enter a line:\n";

    string s;
    getline(cin,s);

    cout << "You entered " << s << '\n';
}

ASCII to int:

ord('a')

gives 97

And back to a string:

• in Python2: str(unichr(97))
• in Python3: chr(97)

gives 'a'

I have looked through multiple answers.\

1. The answer with setting maximum-scale=1 in meta tag works fine on iOS devices but disables the pinch to zoom functionality on Android devices.
2. The one with setting font-size: 16px; onfocus is too hacky for me.

So I wrote a JS function to dynamically change meta tag.

var iOS = navigator.platform && /iPad|iPhone|iPod/.test(navigator.platform);
if (iOS)
    document.head.querySelector('meta[name="viewport"]').content = "width=device-width, initial-scale=1, maximum-scale=1";
else
    document.head.querySelector('meta[name="viewport"]').content = "width=device-width, initial-scale=1";

In Linux it is %llu and in Windows it is %I64u

Although I have found it doesn't work in Windows 2000, there seems to be a bug there!

With your own Code and a Slight Change withou jQuery,

function testingAPI(){ 
    var key = "8a1c6a354c884c658ff29a8636fd7c18"; 
    var url = "https://api.fantasydata.net/nfl/v2/JSON/PlayerSeasonStats/2015";
    console.log(httpGet(url,key)); 
}


function httpGet(url,key){
    var xmlHttp = new XMLHttpRequest();
    xmlHttp.open( "GET", url, false );
    xmlHttp.setRequestHeader("Ocp-Apim-Subscription-Key",key);
    xmlHttp.send(null);
    return xmlHttp.responseText;
}

Thank You

Try this instead

$.unbind('scroll');

http://api.jquery.com/unbind/

Changing Command Execute Timeout in Management Studio:

Click on Tools -> Options

Select Query Execution from tree on left side and enter command timeout in "Execute Timeout" control.

Changing Command Timeout in Server:

In the object browser tree right click on the server which give you timeout and select "Properties" from context menu.

Now in "Server Properties -....." dialog click on "Connections" page in "Select a Page" list (on left side). On the right side you will get property

Remote query timeout (in seconds, 0 = no timeout):
[up/down control]

you can set the value in up/down control.

Old post but wanted to ensure newcomers are aware of Stored procedures.

My 10¢ worth here is that if you are able to write your SQL statement as a stored procedure, that in my view is the optimum approach. I ALWAYS use stored procs and never loop through records in my main code. For Example: SQL Table > SQL Stored Procedures > IIS/Dot.NET > Class.

When you use stored procedures, you can restrict the user to EXECUTE permission only, thus reducing security risks.

Your stored procedure is inherently paramerised, and you can specify input and output parameters.

The stored procedure (if it returns data via SELECT statement) can be accessed and read in the exact same way as you would a regular SELECT statement in your code.

It also runs faster as it is compiled on the SQL Server.

Did I also mention you can do multiple steps, e.g. update a table, check values on another DB server, and then once finally finished, return data to the client, all on the same server, and no interaction with the client. So this is MUCH faster than coding this logic in your code.

I had the same issue, but was quite easy to solve. Follow the next steps:

1) In the Virtual Machine (VMWare) settings:

• Set the USB compatibility to be 2.0 instead of 3.0
• Check the setting "Show all USB input devices"

2) Add the device into the list of allowed development devices in your Apple Developer's account. Without that step there is no way to use your device in Xcode.

Next some instructions: Register a single device

The commands are adduser and addgroup.

Here's a template for Docker you can use in busybox environments (alpine) as well as Debian-based environments (Ubuntu, etc.):

ENV USER=docker
ENV UID=12345
ENV GID=23456

RUN adduser \
    --disabled-password \
    --gecos "" \
    --home "$(pwd)" \
    --ingroup "$USER" \
    --no-create-home \
    --uid "$UID" \
    "$USER"

Note the following:

• --disabled-password prevents prompt for a password
• --gecos "" circumvents the prompt for "Full Name" etc. on Debian-based systems
• --home "$(pwd)" sets the user's home to the WORKDIR. You may not want this.
• --no-create-home prevents cruft getting copied into the directory from /etc/skel

The usage description for these applications is missing the long flags present in the code for adduser and addgroup.

The following long-form flags should work both in alpine as well as debian-derivatives:

adduser

BusyBox v1.28.4 (2018-05-30 10:45:57 UTC) multi-call binary.

Usage: adduser [OPTIONS] USER [GROUP]

Create new user, or add USER to GROUP

        --home DIR           Home directory
        --gecos GECOS        GECOS field
        --shell SHELL        Login shell
        --ingroup GRP        Group (by name)
        --system             Create a system user
        --disabled-password  Don't assign a password
        --no-create-home     Don't create home directory
        --uid UID            User id

One thing to note is that if --ingroup isn't set then the GID is assigned to match the UID. If the GID corresponding to the provided UID already exists adduser will fail.

addgroup

BusyBox v1.28.4 (2018-05-30 10:45:57 UTC) multi-call binary.

Usage: addgroup [-g GID] [-S] [USER] GROUP

Add a group or add a user to a group

        --gid GID  Group id
        --system   Create a system group

I discovered all of this while trying to write my own alternative to the fixuid project for running containers as the hosts UID/GID.

My entrypoint helper script can be found on GitHub.

The intent is to prepend that script as the first argument to ENTRYPOINT which should cause Docker to infer UID and GID from a relevant bind mount.

An environment variable "TEMPLATE" may be required to determine where the permissions should be inferred from.

(At the time of writing I don't have documentation for my script. It's still on the todo list!!)

my approach works without a library and with cropped maps. Means it works with just parts from a Mercator image. Maybe it helps somebody: https://stackoverflow.com/a/10401734/730823

I have found an FTP server and its working. I was successfully able to upload a file to this FTP server and then see file created by hitting same url. Visit here and read properly before use. Good luck...!

Edit: link is now dead, but the FTP server is still up! Connect with the username "anonymous" and an email address as a password: ftp://ftp.swfwmd.state.fl.us

BUT FIRST read this before using it

NSLocale* currentLocale = [NSLocale currentLocale];
[[NSDate date] descriptionWithLocale:currentLocale];  

or use

NSDateFormatter *dateFormatter=[[NSDateFormatter alloc] init]; 
[dateFormatter setDateFormat:@"yyyy-MM-dd HH:mm:ss"];
// or @"yyyy-MM-dd hh:mm:ss a" if you prefer the time with AM/PM 
NSLog(@"%@",[dateFormatter stringFromDate:[NSDate date]]);

SELECT last_value, increment_by from "other_schema".id_seq;

for adding a seq to a column where the schema is not public try this.

nextval('"other_schema".id_seq'::regclass)

I thought my issue was due to my machine.config per answers I found online but the culprit turned out to be in the project's web.config that was clearing out the DbProviderFactories.

<system.data>
  <DbProviderFactories>
    <clear />
       ...
  </DbProviderFactories>
</system.data>

Take a look at the answers provided for this question: Invalid value for size_t?. Also you can use std::find_if with std::distance to get the index.

std::vector<type>::iterator iter = std::find_if(vec.begin(), vec.end(), comparisonFunc);
size_t index = std::distance(vec.begin(), iter);
if(index == vec.size()) 
{
    //invalid
}

using something like:

import matplotlib.pyplot as plt
%matplotlib inline
plt.subplots(figsize=(18,8 ))
plt.subplot(1,3,1)
plt.subplot(1,3,2)
plt.subplot(1,3,3)

The output of the command

Try XmlSerialization

try this

[Serializable]
public class Task
{
    public string Name{get; set;}
    public string Location {get; set;}
    public string Arguments {get; set;}
    public DateTime RunWhen {get; set;}
}

public void WriteXMl(Task task)
{
    XmlSerializer serializer;
    serializer = new XmlSerializer(typeof(Task));

    MemoryStream stream = new MemoryStream();

    StreamWriter writer = new StreamWriter(stream, Encoding.Unicode);
    serializer.Serialize(writer, task);

    int count = (int)stream.Length;

     byte[] arr = new byte[count];
     stream.Seek(0, SeekOrigin.Begin);

     stream.Read(arr, 0, count);

     using (BinaryWriter binWriter=new BinaryWriter(File.Open(@"C:\Temp\Task.xml", FileMode.Create)))
     {
         binWriter.Write(arr);
     }
 }

 public Task GetTask()
 {
     StreamReader stream = new StreamReader(@"C:\Temp\Task.xml", Encoding.Unicode);
     return (Task)serializer.Deserialize(stream);
 }

One possible simplification would be to subclass AuthorizeAttribute:

public class RolesAttribute : AuthorizeAttribute
{
    public RolesAttribute(params string[] roles)
    {
        Roles = String.Join(",", roles);
    }
}

Usage:

[Roles("members", "admin")]

Semantically it is the same as Jim Schmehil's answer.

echo '\x12\x02'

will not be interpreted, and will literally write the string \x12\x02 (and append a newline) to the specified serial port. Instead use

echo -n ^R^B

which you can construct on the command line by typing CtrlVCtrlR and CtrlVCtrlB. Or it is easier to use an editor to type into a script file.

The stty command should work, unless another program is interfering. A common culprit is gpsd which looks for GPS devices being plugged in.

If you're trying to install tensorflow in anaconda and it isn't working, then you may need to downgrade python version because only 3.6.x is currently supported while anaconda has the latest version.

1. check python version: python --version

2. if version > 3.6.x then follow step 3, otherwise stop, the problem may be somewhere else

3. conda search python

4. conda install python=3.6.6

5. Check version again: python --version

6. If version is correct, install tensorflow (step 7)

7. pip install tensorflow

Most likely you don't want to deactivate this Header completely, but use SAMEORIGIN. If you are using the Java Configs (Spring Boot) and would like to allow the X-Frame-Options: SAMEORIGIN, then you would need to use the following.

For older Spring Security versions:

http
   .headers()
       .addHeaderWriter(new XFrameOptionsHeaderWriter(XFrameOptionsHeaderWriter.XFrameOptionsMode.SAMEORIGIN))

For newer versions like Spring Security 4.0.2:

http
   .headers()
      .frameOptions()
         .sameOrigin();

since I have no enough reputation to comment after the highest post, so I add here.

use '|' on linux platform to save disk space.

thx @Hariboo, add events/triggers/routints parameters

mysqldump -x -u [uname] -p[pass]  -C --databases db_name  --events --triggers --routines | sed -e 's/DEFINER[ ]*=[ ]*[^*]*\*/\*/ '  | awk '{ if (index($0,"GTID_PURGED")) { getline; while (length($0) > 0) { getline; } } else { print $0 } }'  | grep -iv 'set @@' | trickle -u 10240 mysql -u username -p -h localhost DATA-BASE-NAME

some issues/tips:

Error: ......not exist when using LOCK TABLES

# --lock-all-tables,-x , this parameter is to keep data consistency because some transaction may still be working like schedule.
# also you need check and confirm: grant all privileges on *.* to root@"%" identified by "Passwd";

ERROR 2006 (HY000) at line 866: MySQL server has gone away mysqldump: Got errno 32 on write

# set this values big enough on destination mysql server, like: max_allowed_packet=1024*1024*20
# use compress parameter '-C'
# use trickle to limit network bandwidth while write data to destination server

ERROR 1419 (HY000) at line 32730: You do not have the SUPER privilege and binary logging is enabled (you might want to use the less safe log_bin_trust_function_creators variable)

# set SET GLOBAL log_bin_trust_function_creators = 1;
# or use super user import data

ERROR 1227 (42000) at line 138: Access denied; you need (at least one of) the SUPER privilege(s) for this operation mysqldump: Got errno 32 on write

# add sed/awk to avoid some privilege issues

hope this help!

Use the -u flag to include a username, and curl will prompt for a password:

curl -u username http://example.com

You can also include the password in the command, but then your password will be visible in bash history:

curl -u username:password http://example.com

The following worked for me:

function changeOrientation(){
switch(window.orientation) {
case 0: // portrait, home bottom
case 180: // portrait, home top
 alert("portrait H: "+$(window).height()+" W: "+$(window).width());       
 break;
          case -90: // landscape, home left
          case 90: // landscape, home right
        alert("landscape H: "+$(window).height()+" W: "+$(window).width());
            break;
        }
    }

 window.onorientationchange = function() { 
            //Need at least 800 milliseconds
            setTimeout(changeOrientation, 1000);
        }

I needed the timeout because the value of window.orientation does not update right away

Actually I am preferring to use NEW_BROKER ,it is working fine on all cases:

ALTER DATABASE [dbname] SET NEW_BROKER WITH ROLLBACK IMMEDIATE;

I would define $Version as a string to start with

[string]$Version

and if it's a param you can use the code posted by Samselvaprabu or if you would rather not present your users with an error you can do something like

while (-not($version)){
    $version = Read-Host "Enter the version ya fool!"
}
$request += "/" + $version

Basically, with prepared statements the data coming in from a potential hacker is treated as data - and there's no way it can be intermixed with your application SQL and/or be interpreted as SQL (which can happen when data passed in is placed directly into your application SQL).

This is because prepared statements "prepare" the SQL query first to find an efficient query plan, and send the actual values that presumably come in from a form later - at that time the query is actually executed.

More great info here:

Prepared statements and SQL Injection

You can use <LinearLayout> to group elements horizontaly. Also you should use style to set margins, background and other properties. This will allow you not to repeat code for every label you use. Here is an example:

<LinearLayout
                    style="@style/FormItem"
                    android:layout_width="match_parent"
                    android:layout_height="wrap_content"
                    android:orientation="horizontal">
                <TextView
                        style="@style/FormLabel"
                        android:layout_width="wrap_content"
                        android:layout_height="@dimen/default_element_height"
                        android:text="@string/name_label"
                        />

                <EditText
                        style="@style/FormText.Editable"
                        android:id="@+id/cardholderName"
                        android:layout_width="wrap_content"
                        android:layout_height="@dimen/default_element_height"
                        android:layout_weight="1"
                        android:gravity="right|center_vertical"
                        android:hint="@string/card_name_hint"
                        android:imeOptions="actionNext"
                        android:singleLine="true"
                        />
            </LinearLayout>

Also you can create a custom view base on the layout above. Have you looked at Creating custom view ?

Swift 5

 func isValidEmailAddress(emailAddressString: String) -> Bool {

 var returnValue = true
 let emailRegEx = "[A-Z0-9a-z.-_]+@[A-Za-z0-9.-]+\\.[A-Za-z]{2,3}"

 do {
        let regex = try NSRegularExpression(pattern: emailRegEx)
        let nsString = emailAddressString as NSString
        let results = regex.matches(in: emailAddressString, range: NSRange(location: 0, length: nsString.length))

        if results.count == 0
        {
            returnValue = false
        }

    } catch let error as NSError {
        print("invalid regex: \(error.localizedDescription)")
        returnValue = false
    }

    return  returnValue
}

Then:

let validEmail = isValidEmailAddress(emailAddressString: "[email protected]")
print(validEmail)

No need to define a new interface when you can use an existing one: android.os.Handler.Callback. Pass an object of type Callback, and invoke callback's handleMessage(Message msg).

You could also use a StringVar variable, even if it's not strictly necessary:

v = StringVar()

e = Entry(master, textvariable=v)
e.pack()

v.set("a default value")
s = v.get()

For more information, see this page on effbot.org.

I believe you need something similar to the following:

<script type="text/javascript">
var count;
function increment(){
    count++;
}
</script>

...

and

<input type="button" onClick="increment()" value="Increment"/>

or

<input type="button" onClick="count++" value="Increment"/>

Unfortunately, I don't believe there really is a better way of doing this due to the nature of Java's handling of primitive types, boxing, arrays and generics. In particular:

• List<T>.toArray won't work because there's no conversion from Integer to int
• You can't use int as a type argument for generics, so it would have to be an int-specific method (or one which used reflection to do nasty trickery).

I believe there are libraries which have autogenerated versions of this kind of method for all the primitive types (i.e. there's a template which is copied for each type). It's ugly, but that's the way it is I'm afraid :(

Even though the Arrays class came out before generics arrived in Java, it would still have to include all the horrible overloads if it were introduced today (assuming you want to use primitive arrays).

It's possible if you are using PHP 5.3.0 or higher.

See Anonymous Functions in the manual.

In your case, you would define exampleMethod like this:

function exampleMethod($anonFunc) {
    //execute anonymous function
    $anonFunc();
}

What about this:

select{
  width: 150px;
  height: 30px;
  padding: 5px;
  color: green;
}
select option { color: black; }
select option:first-child{
  color: green;
}

<select>
  <option>one</option>
  <option>two</option>
</select>

http://jsbin.com/acucan/9

Method 1 :

rake db:migrate:up VERSION=20080906120000

Method 2:

In Rails Console 1. Copy paste the migration class in console (say add_name_to_user.rb) 2. Then in console, type the following

Sharding.run_on_all_shards{AddNameToUser.up}

It is done!!

Depending on the answer from KyungHun Jeon, but the appendChild expect a dom node, so add a index to jquery object to return the node: document.body.appendChild(form[0])

The opposite of the == compare operator is !=.

#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <stdbool.h>

unsigned char * utf8_reverse(const unsigned char *, int);
void assert_true(bool);

int main(void)
{
    unsigned char str[] = "mañana man~ana";
    unsigned char *ret = utf8_reverse(str,  strlen((const char *) str) + 1);

    printf("%s\n", ret);
    assert_true(0 == strncmp((const char *) ret, "ana~nam anañam", strlen("ana~nam anañam") + 1));

    free(ret);

    return EXIT_SUCCESS;
}

unsigned char * utf8_reverse(const unsigned char *str, int size)
{
    unsigned char *ret = calloc(size, sizeof(unsigned char*));
    int ret_size = 0;
    int pos = size - 2;
    int char_size = 0;

    if (str ==  NULL) {
        fprintf(stderr, "failed to allocate memory.\n");
        exit(EXIT_FAILURE);
    }

    while (pos > -1) {

        if (str[pos] < 0x80) {
            char_size = 1;
        } else if (pos > 0 && str[pos - 1] > 0xC1 && str[pos - 1] < 0xE0) {
            char_size = 2;
        } else if (pos > 1 && str[pos - 2] > 0xDF && str[pos - 2] < 0xF0) {
            char_size = 3;
        } else if (pos > 2 && str[pos - 3] > 0xEF && str[pos - 3] < 0xF5) {
            char_size = 4;
        } else {
            char_size = 1;
        }

        pos -= char_size;
        memcpy(ret + ret_size, str + pos + 1, char_size);
        ret_size += char_size;
    }    

    ret[ret_size] = '\0';

    return ret;
}

void assert_true(bool boolean)
{
    puts(boolean == true ? "true" : "false");
}

Here's a complete (yet simple) example of redirecting after X seconds, while updating a counter div:

<html>_x000D_
<body>_x000D_
    <div id="counter">5</div>_x000D_
    <script>_x000D_
        setInterval(function() {_x000D_
            var div = document.querySelector("#counter");_x000D_
            var count = div.textContent * 1 - 1;_x000D_
            div.textContent = count;_x000D_
            if (count <= 0) {_x000D_
                window.location.replace("https://example.com");_x000D_
            }_x000D_
        }, 1000);_x000D_
    </script>_x000D_
</body>_x000D_
</html>

The initial content of the counter div is the number of seconds to wait.

This is a complete program you can compile and run it.

import java.util.Scanner;

class Strlen{

    public static void main(String...args){
        Scanner sc = new Scanner(System.in);
        System.out.print("\nEnter Your Name =>" +"  ");
        String ab = sc.nextLine();
        System.out.println("\nName Length is:" +len(ab));
    }

    public static int len(String ab){
        char[] ac = ab.toCharArray();
        int i = 0, k = 0;

        try{
            for(i=0,k=0;ac[i]!='\0';i++)
                k++;
        }
        catch(Exception e){
        }
        return k;
    }

}

On top of the answers already given, to open a new tab the javascript command window.open() can be used.

For example:

# Opens a new tab
self.driver.execute_script("window.open()")

# Switch to the newly opened tab
self.driver.switch_to.window(self.driver.window_handles[1])

# Navigate to new URL in new tab
self.driver.get("https://google.com")
# Run other commands in the new tab here

You're then able to close the original tab as follows

# Switch to original tab
self.driver.switch_to.window(self.driver.window_handles[0])

# Close original tab
self.driver.close()

# Switch back to newly opened tab, which is now in position 0
self.driver.switch_to.window(self.driver.window_handles[0])

Or close the newly opened tab

# Close current tab
self.driver.close()

# Switch back to original tab
self.driver.switch_to.window(self.driver.window_handles[0])

Hope this helps.

If you are using Java 8, use the code below.

URLConnection connection = url.openConnection();
HttpURLConnection httpConn = (HttpURLConnection) connection;

String basicAuth = Base64.getEncoder().encodeToString((username+":"+password).getBytes(StandardCharsets.UTF_8));
httpConn.setRequestProperty ("Authorization", "Basic "+basicAuth);

In Xcode 4.2

• Project Name/Edit Scheme/Diagnostics/
• Enable Zombie Objects check box
• You're done

Although many year ago, clsocket seems a really nice small cross-platform (Windows, Linux, Mac OSX): https://github.com/DFHack/clsocket

if anyone else need the solution

@Override
public boolean onOptionsItemSelected(MenuItem item) {
    int id = item.getItemId();

    if (id == android.R.id.home) {
        onBackPressed();  return true;
    }

    return super.onOptionsItemSelected(item);
}

In C++20 you'll be able to do:

std::cout << std::format("{:03}", 25); // prints 025

In the meantime you can use the {fmt} library, std::format is based on.

Disclaimer: I'm the author of {fmt} and C++20 std::format.

Here's a simple, yet powerful example, using the apache class HierarchicalINIConfiguration:

HierarchicalINIConfiguration iniConfObj = new HierarchicalINIConfiguration(iniFile); 

// Get Section names in ini file     
Set setOfSections = iniConfObj.getSections();
Iterator sectionNames = setOfSections.iterator();

while(sectionNames.hasNext()){

 String sectionName = sectionNames.next().toString();

 SubnodeConfiguration sObj = iniObj.getSection(sectionName);
 Iterator it1 =   sObj.getKeys();

    while (it1.hasNext()) {
    // Get element
    Object key = it1.next();
    System.out.print("Key " + key.toString() +  " Value " +  
                     sObj.getString(key.toString()) + "\n");
}

Commons Configuration has a number of runtime dependencies. At a minimum, commons-lang and commons-logging are required. Depending on what you're doing with it, you may require additional libraries (see previous link for details).

I know this is old but this seems to work well for me in 2020...

Using the border-image CSS property I was able to quickly manipulate the borders for this fading purpose.

Note: I don't think border-image works well with border-radius... I seen someone saying that somewhere but for this purpose it works well.

1 Liner:

CSS

 .bbdr_rfade_1      { border: 4px solid; border-image: linear-gradient(90deg, rgba(60,74,83,0.90), rgba(60,74,83,.00)) 1; border-left:none; border-top:none; border-right:none;  }

HTML

<div class = 'bbdr_rfade_1'>Oh I am so going to not up-vote this guy...</div>

The best solution is maybe to calculate the size of each database file, using the sys.sysfiles view, considering a size of 8 KB for each page, as follows:

USE [myDatabase]
GO

SELECT
    [size] * 8
    , [filename]
FROM sysfiles

The [field] column represents the size of the file, in pages (MSDN Reference to sysfiles).

You would see there will be at least two files (MDF and LDF): the sum of these files will give you the correct size of the entire database...

Just use the *args parameter, which allows you to pass as many arguments as you want after your a,b,c. You would have to add some logic to map args->c,d,e,f but its a "way" of overloading.

def myfunc(a,b, *args, **kwargs):
   for ar in args:
      print ar
myfunc(a,b,c,d,e,f)

And it will print values of c,d,e,f

Similarly you could use the kwargs argument and then you could name your parameters.

def myfunc(a,b, *args, **kwargs):
      c = kwargs.get('c', None)
      d = kwargs.get('d', None)
      #etc
myfunc(a,b, c='nick', d='dog', ...)

And then kwargs would have a dictionary of all the parameters that are key valued after a,b

You can use Location as mentioned here.

Here's my code if the link opened on new tab

navBack() {
    let cur_path = this.location.path();
    this.location.back();
    if (cur_path === this.location.path())
     this.router.navigate(['/default-route']);    
  }

Required imports

import { Router } from '@angular/router';
import { Location } from '@angular/common';

Warning: If you are saving your keys under C:/User/username/.ssh ( the default place), make sure to back up your keys somewhere (eg your password manager).

After the most recent Windows 10 Update (version 1607), my .ssh folder was empty. This is where my keys have always been, but Windows decided to delete them when updating.

Thankfully I had backed up my keys... But... I bet some people will be reverting their PC's today.