Programs & Examples On #Subitem

Solution With Less XAML and More C#

If you define the ListView in XAML:

<ListView x:Name="listView"/>

Then you can add columns and populate it in C#:

public Window()
{
    // Initialize
    this.InitializeComponent();

    // Add columns
    var gridView = new GridView();
    this.listView.View = gridView;
    gridView.Columns.Add(new GridViewColumn { 
        Header = "Id", DisplayMemberBinding = new Binding("Id") });
    gridView.Columns.Add(new GridViewColumn { 
        Header = "Name", DisplayMemberBinding = new Binding("Name") });

    // Populate list
    this.listView.Items.Add(new MyItem { Id = 1, Name = "David" });
}

See definition of MyItem below.

Solution With More XAML and less C#

However, it's easier to define the columns in XAML (inside the ListView definition):

<ListView x:Name="listView">
    <ListView.View>
        <GridView>
            <GridViewColumn Header="Id" DisplayMemberBinding="{Binding Id}"/>
            <GridViewColumn Header="Name" DisplayMemberBinding="{Binding Name}"/>
        </GridView>
    </ListView.View>
</ListView>

And then just populate the list in C#:

public Window()
{
    // Initialize
    this.InitializeComponent();

    // Populate list
    this.listView.Items.Add(new MyItem { Id = 1, Name = "David" });
}

See definition of MyItem below.

MyItem Definition

MyItem is defined like this:

public class MyItem
{
    public int Id { get; set; }

    public string Name { get; set; }
}

I didn't see anyone answer this correctly. So I'm posting it here. In order to get columns to show up you need to specify the following line.

lvRegAnimals.View = View.Details;

And then add your columns after that.

lvRegAnimals.Columns.Add("Id", -2, HorizontalAlignment.Left);
lvRegAnimals.Columns.Add("Name", -2, HorizontalAlignment.Left);
lvRegAnimals.Columns.Add("Age", -2, HorizontalAlignment.Left);

Hope this helps anyone else looking for this answer in the future.

Simple one, just do like this..

ListViewItem lvi = new ListViewItem(pet.Name);
    lvi.SubItems.Add(pet.Type);
    lvi.SubItems.Add(pet.Age);
    listView.Items.Add(lvi);

Option 2

<ul>
<li>Choice A</li>
<li>Choice B
  <ul>
    <li>Sub 1</li>
    <li>Sub 2</li>
  </ul>
</li>
</ul>

Nesting Lists - UL

Generally:

ListViewItem item = new ListViewItem("Column1Text")
   { Tag = optionalRefToSourceObject };

item.SubItems.Add("Column2Text");
item.SubItems.Add("Column3Text");
myListView.Items.Add(item);

Sorry, don't have enough rep, or would have commented on CraigTP's answer.

I found the solution from the 1st link - C# Editable ListView, quite easy to use. The general idea is to:

• identify the SubItem that was selected and overlay a TextBox with the SubItem's text over the SubItem
• give this TextBox focus
• change SubItem's text to that of TextBox's when TextBox loses focus

What a workaround for a seemingly simple operation :-|

You need to put the arguments to pass ("/select etc") in the second parameter of the Start method.

Spark >= 2.3.0

SPARK-22614 exposes range partitioning.

val partitionedByRange = df.repartitionByRange(42, $"k")

partitionedByRange.explain
// == Parsed Logical Plan ==
// 'RepartitionByExpression ['k ASC NULLS FIRST], 42
// +- AnalysisBarrier Project [_1#2 AS k#5, _2#3 AS v#6]
// 
// == Analyzed Logical Plan ==
// k: string, v: int
// RepartitionByExpression [k#5 ASC NULLS FIRST], 42
// +- Project [_1#2 AS k#5, _2#3 AS v#6]
//    +- LocalRelation [_1#2, _2#3]
// 
// == Optimized Logical Plan ==
// RepartitionByExpression [k#5 ASC NULLS FIRST], 42
// +- LocalRelation [k#5, v#6]
// 
// == Physical Plan ==
// Exchange rangepartitioning(k#5 ASC NULLS FIRST, 42)
// +- LocalTableScan [k#5, v#6]

SPARK-22389 exposes external format partitioning in the Data Source API v2.

Spark >= 1.6.0

In Spark >= 1.6 it is possible to use partitioning by column for query and caching. See: SPARK-11410 and SPARK-4849 using repartition method:

val df = Seq(
  ("A", 1), ("B", 2), ("A", 3), ("C", 1)
).toDF("k", "v")

val partitioned = df.repartition($"k")
partitioned.explain

// scala> df.repartition($"k").explain(true)
// == Parsed Logical Plan ==
// 'RepartitionByExpression ['k], None
// +- Project [_1#5 AS k#7,_2#6 AS v#8]
//    +- LogicalRDD [_1#5,_2#6], MapPartitionsRDD[3] at rddToDataFrameHolder at <console>:27
// 
// == Analyzed Logical Plan ==
// k: string, v: int
// RepartitionByExpression [k#7], None
// +- Project [_1#5 AS k#7,_2#6 AS v#8]
//    +- LogicalRDD [_1#5,_2#6], MapPartitionsRDD[3] at rddToDataFrameHolder at <console>:27
// 
// == Optimized Logical Plan ==
// RepartitionByExpression [k#7], None
// +- Project [_1#5 AS k#7,_2#6 AS v#8]
//    +- LogicalRDD [_1#5,_2#6], MapPartitionsRDD[3] at rddToDataFrameHolder at <console>:27
// 
// == Physical Plan ==
// TungstenExchange hashpartitioning(k#7,200), None
// +- Project [_1#5 AS k#7,_2#6 AS v#8]
//    +- Scan PhysicalRDD[_1#5,_2#6]

Unlike RDDs Spark Dataset (including Dataset[Row] a.k.a DataFrame) cannot use custom partitioner as for now. You can typically address that by creating an artificial partitioning column but it won't give you the same flexibility.

Spark < 1.6.0:

One thing you can do is to pre-partition input data before you create a DataFrame

import org.apache.spark.sql.types._
import org.apache.spark.sql.Row
import org.apache.spark.HashPartitioner

val schema = StructType(Seq(
  StructField("x", StringType, false),
  StructField("y", LongType, false),
  StructField("z", DoubleType, false)
))

val rdd = sc.parallelize(Seq(
  Row("foo", 1L, 0.5), Row("bar", 0L, 0.0), Row("??", -1L, 2.0),
  Row("foo", -1L, 0.0), Row("??", 3L, 0.6), Row("bar", -3L, 0.99)
))

val partitioner = new HashPartitioner(5) 

val partitioned = rdd.map(r => (r.getString(0), r))
  .partitionBy(partitioner)
  .values

val df = sqlContext.createDataFrame(partitioned, schema)

Since DataFrame creation from an RDD requires only a simple map phase existing partition layout should be preserved*:

assert(df.rdd.partitions == partitioned.partitions)

The same way you can repartition existing DataFrame:

sqlContext.createDataFrame(
  df.rdd.map(r => (r.getInt(1), r)).partitionBy(partitioner).values,
  df.schema
)

So it looks like it is not impossible. The question remains if it make sense at all. I will argue that most of the time it doesn't:

1. Repartitioning is an expensive process. In a typical scenario most of the data has to be serialized, shuffled and deserialized. From the other hand number of operations which can benefit from a pre-partitioned data is relatively small and is further limited if internal API is not designed to leverage this property.

   • joins in some scenarios, but it would require an internal support,
   • window functions calls with matching partitioner. Same as above, limited to a single window definition. It is already partitioned internally though, so pre-partitioning may be redundant,
   • simple aggregations with GROUP BY - it is possible to reduce memory footprint of the temporary buffers**, but overall cost is much higher. More or less equivalent to groupByKey.mapValues(_.reduce) (current behavior) vs reduceByKey (pre-partitioning). Unlikely to be useful in practice.
   • data compression with SqlContext.cacheTable. Since it looks like it is using run length encoding, applying OrderedRDDFunctions.repartitionAndSortWithinPartitions could improve compression ratio.

2. Performance is highly dependent on a distribution of the keys. If it is skewed it will result in a suboptimal resource utilization. In the worst case scenario it will be impossible to finish the job at all.

3. A whole point of using a high level declarative API is to isolate yourself from a low level implementation details. As already mentioned by @dwysakowicz and @RomiKuntsman an optimization is a job of the Catalyst Optimizer. It is a pretty sophisticated beast and I really doubt you can easily improve on that without diving much deeper into its internals.

Related concepts

Partitioning with JDBC sources:

JDBC data sources support predicates argument. It can be used as follows:

sqlContext.read.jdbc(url, table, Array("foo = 1", "foo = 3"), props)

It creates a single JDBC partition per predicate. Keep in mind that if sets created using individual predicates are not disjoint you'll see duplicates in the resulting table.

partitionBy method in DataFrameWriter:

Spark DataFrameWriter provides partitionBy method which can be used to "partition" data on write. It separates data on write using provided set of columns

val df = Seq(
  ("foo", 1.0), ("bar", 2.0), ("foo", 1.5), ("bar", 2.6)
).toDF("k", "v")

df.write.partitionBy("k").json("/tmp/foo.json")

This enables predicate push down on read for queries based on key:

val df1 = sqlContext.read.schema(df.schema).json("/tmp/foo.json")
df1.where($"k" === "bar")

but it is not equivalent to DataFrame.repartition. In particular aggregations like:

val cnts = df1.groupBy($"k").sum()

will still require TungstenExchange:

cnts.explain

// == Physical Plan ==
// TungstenAggregate(key=[k#90], functions=[(sum(v#91),mode=Final,isDistinct=false)], output=[k#90,sum(v)#93])
// +- TungstenExchange hashpartitioning(k#90,200), None
//    +- TungstenAggregate(key=[k#90], functions=[(sum(v#91),mode=Partial,isDistinct=false)], output=[k#90,sum#99])
//       +- Scan JSONRelation[k#90,v#91] InputPaths: file:/tmp/foo.json

bucketBy method in DataFrameWriter (Spark >= 2.0):

bucketBy has similar applications as partitionBy but it is available only for tables (saveAsTable). Bucketing information can used to optimize joins:

// Temporarily disable broadcast joins
spark.conf.set("spark.sql.autoBroadcastJoinThreshold", -1)

df.write.bucketBy(42, "k").saveAsTable("df1")
val df2 = Seq(("A", -1.0), ("B", 2.0)).toDF("k", "v2")
df2.write.bucketBy(42, "k").saveAsTable("df2")

// == Physical Plan ==
// *Project [k#41, v#42, v2#47]
// +- *SortMergeJoin [k#41], [k#46], Inner
//    :- *Sort [k#41 ASC NULLS FIRST], false, 0
//    :  +- *Project [k#41, v#42]
//    :     +- *Filter isnotnull(k#41)
//    :        +- *FileScan parquet default.df1[k#41,v#42] Batched: true, Format: Parquet, Location: InMemoryFileIndex[file:/spark-warehouse/df1], PartitionFilters: [], PushedFilters: [IsNotNull(k)], ReadSchema: struct<k:string,v:int>
//    +- *Sort [k#46 ASC NULLS FIRST], false, 0
//       +- *Project [k#46, v2#47]
//          +- *Filter isnotnull(k#46)
//             +- *FileScan parquet default.df2[k#46,v2#47] Batched: true, Format: Parquet, Location: InMemoryFileIndex[file:/spark-warehouse/df2], PartitionFilters: [], PushedFilters: [IsNotNull(k)], ReadSchema: struct<k:string,v2:double>

* By partition layout I mean only a data distribution. partitioned RDD has no longer a partitioner. ** Assuming no early projection. If aggregation covers only small subset of columns there is probably no gain whatsoever.

Create a new keypair: (go with the defaults)

ssh-keygen

Copy the public key to the server: (password for the last time)

ssh-copy-id [email protected]

From now on the server should recognize your key and not ask you for the password anymore:

ssh [email protected]

If you are using the NestJS framework, you can get code coverage using this command:

npm run test:cov

When I'm just testing a string to see if it is a GUID, I don't really want to create a Guid object that I don't need. So...

public static class GuidEx
{
    public static bool IsGuid(string value)
    {
        Guid x;
        return Guid.TryParse(value, out x);
    }
}

And here's how you use it:

string testMe = "not a guid";
if (GuidEx.IsGuid(testMe))
{
...
}

Here are a couple of ways to do that:

• The JavaScript Source: Navigation: Full Screen Window
• Javascript to open a full screen window

I'd suggest, provide a popup asking the user if s/he wants to go full screen and then call this javascript accordingly.

Method

$user = $stmt->fetch(PDO::FETCH_ASSOC);

returns a dictionary. You can simply get email and password:

$email = $user['email'];
$password = $user['password'];

Other method

$users = $stmt->fetchall(PDO::FETCH_ASSOC);

returns a list of a dictionary

In case anybody is interested, I wrote a solution for this using Prototype. In order to get the button to appear correctly, I had to specify extraPlugins: 'ajaxsave' from inside the CKEDITOR.replace() method call.

Here is the plugin.js:

CKEDITOR.plugins.add('ajaxsave',
{
    init: function(editor)
    {
    var pluginName = 'ajaxsave';

    editor.addCommand( pluginName,
    {
        exec : function( editor )
        {
            new Ajax.Request('ajaxsave.php',
            {
                method:     "POST",
                parameters: { filename: 'index.html', editor: editor.getData() },
                onFailure:  function() { ThrowError("Error: The server has returned an unknown error"); },
                on0:        function() { ThrowError('Error: The server is not responding. Please try again.'); },
                onSuccess:  function(transport) {

                    var resp = transport.responseText;

                    //Successful processing by ckprocess.php should return simply 'OK'. 
                    if(resp == "OK") {
                        //This is a custom function I wrote to display messages. Nicer than alert() 
                        ShowPageMessage('Changes have been saved successfully!');
                    } else {
                        ShowPageMessage(resp,'10');
                    }
                }
            });
        },

        canUndo : true
    });

    editor.ui.addButton('ajaxsave',
    {
        label: 'Save',
        command: pluginName,
        className : 'cke_button_save'
    });
    }
});

Here is a sample helper class which converts an Object and returns an Expando with all public properties of the given object.

    public static class dynamicHelper
        {
            public static ExpandoObject convertToExpando(object obj)
            {
                //Get Properties Using Reflections
                BindingFlags flags = BindingFlags.Public | BindingFlags.Instance;
                PropertyInfo[] properties = obj.GetType().GetProperties(flags);

                //Add Them to a new Expando
                ExpandoObject expando = new ExpandoObject();
                foreach (PropertyInfo property in properties)
                {
                    AddProperty(expando, property.Name, property.GetValue(obj));
                }

                return expando;
            }

            public static void AddProperty(ExpandoObject expando, string propertyName, object propertyValue)
            {
                //Take use of the IDictionary implementation
                var expandoDict = expando as IDictionary;
                if (expandoDict.ContainsKey(propertyName))
                    expandoDict[propertyName] = propertyValue;
                else
                    expandoDict.Add(propertyName, propertyValue);
            }
        }

Usage:

//Create Dynamic Object
dynamic expandoObj= dynamicHelper.convertToExpando(myObject);

//Add Custom Properties
dynamicHelper.AddProperty(expandoObj, "dynamicKey", "Some Value");

There doesn't seem to be a standardized default value. I have the feeling the default is 0, and the timeout event left totally dependent on browser and network settings.

For IE, there is a timeout property for XMLHTTPRequests here. It defaults to null, and it says the network stack is likely to be the first to time out (which will not generate an ontimeout event by the way).

Try this out.

int day = 0;
        int hh = 0;
        int mm = 0;
        try {
            SimpleDateFormat dateFormat = new SimpleDateFormat("dd-MMM-yyyy 'at' hh:mm aa");
            Date oldDate = dateFormat.parse(oldTime);
            Date cDate = new Date();
            Long timeDiff = cDate.getTime() - oldDate.getTime();
            day = (int) TimeUnit.MILLISECONDS.toDays(timeDiff);
            hh = (int) (TimeUnit.MILLISECONDS.toHours(timeDiff) - TimeUnit.DAYS.toHours(day));
            mm = (int) (TimeUnit.MILLISECONDS.toMinutes(timeDiff) - TimeUnit.HOURS.toMinutes(TimeUnit.MILLISECONDS.toHours(timeDiff)));



        } catch (ParseException e) {
            e.printStackTrace();
        }

        if (mm <= 60 && hh!= 0) {
            if (hh <= 60 && day != 0) {
                return day + " DAYS AGO";
            } else {
                return hh + " HOUR AGO";
            }
        } else {
            return mm + " MIN AGO";
        }

Only you want to set default value parameter. This calling third overloading method.

dt.Columns.Add("MyRow", type(System.Int32),0);

The compiler can't figure out what type to make the Dictionary, because it's not homogenous. You have values of different types. The only way to get around this is to make it a [String: Any], which will make everything clunky as all hell.

return [
    "title": title,
    "is_draft": isDraft,
    "difficulty": difficulty,
    "duration": duration,
    "cost": cost,
    "user_id": userId,
    "description": description,
    "to_sell": toSell,
    "images": [imageParameters, imageToDeleteParameters].flatMap { $0 }
] as [String: Any]

This is a job for a struct. It'll vastly simplify working with this data structure.

You can use the jps utility that is included in the JDK to find the process id of a Java process. The output will show you the name of the executable JAR file or the name of the main class.

Then use the Windows task manager to terminate the process. If you want to do it on the command line, use

TASKKILL /PID %PID%

It's almost correct.

Since the - is a javascript operator, you can't really have that in property names. If you were setting, border or something single-worded like that instead, your code would work just fine.

However, the thing you need to remember for padding-top, and for any hyphenated attribute name, is that in javascript, you remove the hyphen, and make the next letter uppercase, so in your case that'd be paddingTop.

There are some other exceptions. JavaScript has some reserved words, so you can't set float like that, for instance. Instead, in some browsers you need to use cssFloat and in others styleFloat. It is for discrepancies like this that it is recommended that you use a framework such as jQuery, that handles browser incompatibilities for you...

You are reinventing the wheel. Normal PowerShell scripts have parameters starting with -, like script.ps1 -server http://devserver

Then you handle them in param section in the beginning of the file.

You can also assign default values to your params, read them from console if not available or stop script execution:

 param (
    [string]$server = "http://defaultserver",
    [Parameter(Mandatory=$true)][string]$username,
    [string]$password = $( Read-Host "Input password, please" )
 )

Inside the script you can simply

write-output $server

since all parameters become variables available in script scope.

In this example, the $server gets a default value if the script is called without it, script stops if you omit the -username parameter and asks for terminal input if -password is omitted.

Update: You might also want to pass a "flag" (a boolean true/false parameter) to a PowerShell script. For instance, your script may accept a "force" where the script runs in a more careful mode when force is not used.

The keyword for that is [switch] parameter type:

 param (
    [string]$server = "http://defaultserver",
    [string]$password = $( Read-Host "Input password, please" ),
    [switch]$force = $false
 )

Inside the script then you would work with it like this:

if ($force) {
  //deletes a file or does something "bad"
}

Now, when calling the script you'd set the switch/flag parameter like this:

.\yourscript.ps1 -server "http://otherserver" -force

If you explicitly want to state that the flag is not set, there is a special syntax for that

.\yourscript.ps1 -server "http://otherserver" -force:$false

Links to relevant Microsoft documentation (for PowerShell 5.0; tho versions 3.0 and 4.0 are also available at the links):

• about_Scripts
• about_Functions
• about_Functions_Advanced_Parameters

I had this concern when working on a Rails application with Docker.

My most preferred approach is to generally not use quotes. This includes not using quotes for:

• variables like ${RAILS_ENV}
• values separated by a colon (:) like postgres-log:/var/log/postgresql
• other strings values

I, however, use double-quotes for integer values that need to be converted to strings like:

• docker-compose version like version: "3.8"
• port numbers like "8080:8080"

However, for special cases like booleans, floats, integers, and other cases, where using double-quotes for the entry values could be interpreted as strings, please do not use double-quotes.

Here's a sample docker-compose.yml file to explain this concept:

version: "3"

services:
  traefik:
    image: traefik:v2.2.1
    command:
      - --api.insecure=true # Don't do that in production
      - --providers.docker=true
      - --providers.docker.exposedbydefault=false
      - --entrypoints.web.address=:80
    ports:
      - "80:80"
      - "8080:8080"
    volumes:
      - /var/run/docker.sock:/var/run/docker.sock:ro

That's all.

I hope this helps

You can read files in raw/res using getResources().openRawResource(R.raw.myfilename).

BUT there is an IDE limitation that the file name you use can only contain lower case alphanumeric characters and dot. So file names like XYZ.txt or my_data.bin will not be listed in R.

Caucho Quercus can run PHP code on the jvm.

One potential big difference between sleep/interrupt and wait/notify is that

• calling interrupt() during sleep() always throws an exception (e.g. InterruptedException), whereas
• calling notify() during wait() does not.

Generating an exception when not needed is inefficient. If you have threads communicating with each other at a high rate, then it would be generating a lot of exceptions if you were calling interrupt all the time, which is a total waste of CPU.

The accepted answer does not work for databases that have large numbers of tables, e.g. Drupal databases. Instead, see the script here: https://stackoverflow.com/a/12917793/1507877 which does work on MySQL 5.5. CAUTION: Around line 11, there is a "WHERE table_schema = SCHEMA();" This should instead be "WHERE table_schema = 'INSERT NAME OF DB INTO WHICH IMPORT WILL OCCUR';"

The ZXing project provides a standalone barcode reader application which — via Android's intent mechanism — can be called by other applications who wish to integrate barcode scanning.

The easiest way to do this is to call the ZXing SCAN Intent from your application, like this:

public Button.OnClickListener mScan = new Button.OnClickListener() {
    public void onClick(View v) {
        Intent intent = new Intent("com.google.zxing.client.android.SCAN");
        intent.putExtra("SCAN_MODE", "QR_CODE_MODE");
        startActivityForResult(intent, 0);
    }
};

public void onActivityResult(int requestCode, int resultCode, Intent intent) {
    if (requestCode == 0) {
        if (resultCode == RESULT_OK) {
            String contents = intent.getStringExtra("SCAN_RESULT");
            String format = intent.getStringExtra("SCAN_RESULT_FORMAT");
            // Handle successful scan
        } else if (resultCode == RESULT_CANCELED) {
            // Handle cancel
        }
    }
}

Pressing the button linked to mScan would launch directly into the ZXing barcode scanner screen (or crash if ZXing isn't installed). Once a barcode has been recognised, you'll receive the result in your Activity, here in the contents variable.

To avoid the crashing and simplify things for you, ZXing have provided a utility class which you could integrate into your application to make the installation of ZXing smoother, by redirecting the user to the Android Market if they don't have it installed already.

Finally, if you want to integrate barcode scanning directly into your application without relying on having the separate ZXing application installed, well then it's an open source project and you can do so! :)

Edit: Somebody edited this guide into this answer (it sounds a bit odd, I can't vouch as to its accuracy, and I'm not sure why they're using Eclipse in 2015):

Step by step to setup zxing 3.2.1 in eclipse

1. Download zxing-master.zip from "https://github.com/zxing/zxing"
2. Unzip zxing-master.zip, Use eclipse to import "android" project in zxing-master
3. Download core-3.2.1.jar from "http://repo1.maven.org/maven2/com/google/zxing/core/3.2.1/"
4. Create "libs" folder in "android" project and paste cor-3.2.1.jar into the libs folder
5. Click on project: choose "properties" -> "Java Compiler" to change level to 1.7. Then click on "Android" change "Project build target" to android 4.4.2+, because using 1.7 requires compiling with Android 4.4
6. If "CameraConfigurationUtils.java" don't exist in "zxing-master/android/app/src/main/java/com/google/zxing/client/android/camera/". You can copy it from "zxing-master/android-core/src/main/java/com/google/zxing/client/android/camera/" and paste to your project.
7. Clean and build project. If your project show error about "switch - case", you should change them to "if - else".
8. Completed. Clean and build project. You can click on "Proprties" > "Android" > click on "Is Libraries" to use for your project.

To get the cell value, you need to read it directly from DataGridView1 using e.RowIndex and e.ColumnIndex properties.

Eg:

Private Sub DataGridView1_CellContentClick(ByVal sender As System.Object, ByVal e As System.Windows.Forms.DataGridViewCellEventArgs) Handles DataGridView1.CellContentClick
   Dim value As Object = DataGridView1.Rows(e.RowIndex).Cells(e.ColumnIndex).Value

   If IsDBNull(value) Then 
      TextBox1.Text = "" ' blank if dbnull values
   Else
      TextBox1.Text = CType(value, String)
   End If
End Sub

If you've decided that:

• the thing you need to do is lock on the current object; and
• you want to lock it with granularity smaller than a whole method;

then I don't see the a taboo over synchronizezd(this).

Some people deliberately use synchronized(this) (instead of marking the method synchronized) inside the whole contents of a method because they think it's "clearer to the reader" which object is actually being synchronized on. So long as people are making an informed choice (e.g. understand that by doing so they're actually inserting extra bytecodes into the method and this could have a knock-on effect on potential optimisations), I don't particularly see a problem with this. You should always document the concurrent behaviour of your program, so I don't see the "'synchronized' publishes the behaviour" argument as being so compelling.

As to the question of which object's lock you should use, I think there's nothing wrong with synchronizing on the current object if this would be expected by the logic of what you're doing and how your class would typically be used. For example, with a collection, the object that you would logically expect to lock is generally the collection itself.

This will return default size of text on button in pixels.

Kotlin

val size = Button(this).textSize

Java

float size = new Button(this).getTextSize();

This configuration to your nginx.conf should help you.

https://gist.github.com/baskaran-md/e46cc25ccfac83f153bb

server {
    listen       80;
    server_name  localhost;

    location / {
        root   html;
        index  index.html index.htm;
    }

    error_page  404     /404.html;
    error_page  403     /403.html;

    # To allow POST on static pages
    error_page  405     =200 $uri;

    # ...
}

Your empList is object type but you are trying to push strings

Try this

this.empList.push({this.name,this.empoloyeeID});

Query for REBUILD/REORGANIZE Indexes

• 30%<= Rebuild
• 5%<= Reorganize
• 5%> do nothing

Query:

SELECT OBJECT_NAME(ind.OBJECT_ID) AS TableName, 
ind.name AS IndexName, indexstats.index_type_desc AS IndexType, 
indexstats.avg_fragmentation_in_percent,
'ALTER INDEX ' + QUOTENAME(ind.name)  + ' ON ' +QUOTENAME(object_name(ind.object_id)) + 
CASE    WHEN indexstats.avg_fragmentation_in_percent>30 THEN ' REBUILD ' 
        WHEN indexstats.avg_fragmentation_in_percent>=5 THEN 'REORGANIZE'
        ELSE NULL END as [SQLQuery]  -- if <5 not required, so no query needed
FROM sys.dm_db_index_physical_stats(DB_ID(), NULL, NULL, NULL, NULL) indexstats 
INNER JOIN sys.indexes ind ON ind.object_id = indexstats.object_id 
    AND ind.index_id = indexstats.index_id 
WHERE 
--indexstats.avg_fragmentation_in_percent , e.g. >10, you can specify any number in percent 
ind.Name is not null 
ORDER BY indexstats.avg_fragmentation_in_percent DESC

Output

TableName      IndexName            IndexType              avg_fragmentation_in_percent SQLQuery
--------------------------------------------------------------------------------------- ------------------------------------------------------
Table1         PK_Table1            CLUSTERED INDEX        75                           ALTER INDEX [PK_Table1] ON [Table1] REBUILD 
Table1         IX_Table1_col1_col2  NONCLUSTERED INDEX     66,6666666666667             ALTER INDEX [IX_Table1_col1_col2] ON [Table1] REBUILD 
Table2         IX_Table2_           NONCLUSTERED INDEX     10                           ALTER INDEX [IX_Table2_] ON [Table2] REORGANIZE
Table2         IX_Table2_           NONCLUSTERED INDEX     3                            NULL

You can use the keys function from the underscore.js library to get the keys, then the sort() array method to sort them:

var sortedKeys = _.keys(dict).sort();

The keys function in the underscore's source code:

// Retrieve the names of an object's properties.
// Delegates to **ECMAScript 5**'s native `Object.keys`
_.keys = nativeKeys || function(obj) {
    if (obj !== Object(obj)) throw new TypeError('Invalid object');
    var keys = [];
    for (var key in obj) if (_.has(obj, key)) keys.push(key);
    return keys;
};    

// Shortcut function for checking if an object has a given property directly
// on itself (in other words, not on a prototype).
_.has = function(obj, key) {
    return hasOwnProperty.call(obj, key);
};

Try Case

SELECT   stock.name,
      CASE 
         WHEN stock.quantity <20 THEN 'Buy urgent'
         ELSE 'There is enough'
      END
FROM stock

I'd use something like:

dim customer = (from c in xmldoc...<Customer> 
                where c.<ID>.Value=22 
                select c).SingleOrDefault 

Edit:

missed the c# tag, sorry......the example is in VB.NET

All you have to do is In your bLoanButton_Click , add a line to rebind the Grid to the SqlDataSource :

protected void bLoanButton_Click(object sender, EventArgs e)
{

//your same code
........

GridView1.DataBind();


}

regards

dt.AsEnumerable()
    .GroupBy(r => new { Col1 = r["Col1"], Col2 = r["Col2"] })
    .Select(g =>
    {
        var row = dt.NewRow();

        row["PK"] = g.Min(r => r.Field<int>("PK"));
        row["Col1"] = g.Key.Col1;
        row["Col2"] = g.Key.Col2;

        return row;

    })
    .CopyToDataTable();

There is a danger with using the <input type="text" pattern="\d*"> to bring up the numeric keyboard. On firefox and chrome, the regular expression contained within the pattern causes the browser to validate the input to that expression. errors will occur if it doesn't match the pattern or is left blank. Be aware of unintended actions in other browsers.

I want share my experience. A few days ago I have to update 21 million records in table with 76 million records. My colleague suggested the next variant. For example, we have the next table 'Persons':

Id | FirstName | LastName | Email            | JobTitle
1  | John      |  Doe     | [email protected]     | Software Developer
2  | John1     |  Doe1    | [email protected]     | Software Developer
3  | John2     |  Doe2    | [email protected]     | Web Designer

Task: Update persons to the new Job Title: 'Software Developer' -> 'Web Developer'.

1. Create Temporary Table 'Persons_SoftwareDeveloper_To_WebDeveloper (Id INT Primary Key)'

2. Select into temporary table persons which you want to update with the new Job Title:

INSERT INTO Persons_SoftwareDeveloper_To_WebDeveloper SELECT Id FROM
Persons WITH(NOLOCK) --avoid lock 
WHERE JobTitle = 'Software Developer' 
OPTION(MAXDOP 1) -- use only one core

Depends on rows count, this statement will take some time to fill your temporary table, but it would avoid locks. In my situation it took about 5 minutes (21 million rows).

3. The main idea is to generate micro sql statements to update database. So, let's print them:

DECLARE @i INT, @pagesize INT, @totalPersons INT
    SET @i=0
    SET @pagesize=2000
    SELECT @totalPersons = MAX(Id) FROM Persons

    while @i<= @totalPersons
    begin
    Print '
    UPDATE persons 
      SET persons.JobTitle = ''ASP.NET Developer''
      FROM  Persons_SoftwareDeveloper_To_WebDeveloper tmp
      JOIN Persons persons ON tmp.Id = persons.Id
      where persons.Id between '+cast(@i as varchar(20)) +' and '+cast(@i+@pagesize as varchar(20)) +' 
        PRINT ''Page ' + cast((@i / @pageSize) as varchar(20))  + ' of ' + cast(@totalPersons/@pageSize as varchar(20))+'
     GO
     '
     set @i=@i+@pagesize
    end

After executing this script you will receive hundreds of batches which you can execute in one tab of MS SQL Management Studio.

4. Run printed sql statements and check for locks on table. You always can stop process and play with @pageSize to speed up or speed down updating(don't forget to change @i after you pause script).

5. Drop Persons_SoftwareDeveloper_To_AspNetDeveloper. Remove temporary table.

Minor Note: This migration could take a time and new rows with invalid data could be inserted during migration. So, firstly fix places where your rows adds. In my situation I fixed UI, 'Software Developer' -> 'Web Developer'.

Bootstrap event for modal load was changed in Bootstrap 3

just use shown.bs.modal event:

$('.modal').on('shown.bs.modal', function() {
    $(this).find('iframe').attr('src','http://www.google.com')
})  

More can found on the event at the below link:

http://getbootstrap.com/javascript/

Both other answers are correct, but I thought it worth noting that the place where I got stuck was not realizing that you'll need order by the alias and make sure that the alias is the same for both the selects... so

select 'foo'
union
select item as `foo`
from myTable
order by `foo`

notice that I'm using single quotes in the first select but backticks for the others.

That will get you the sorting you need.

The MessageBox does produce a DialogResults

DialogResult r = MessageBox.Show("Some question here");

You can also specify the buttons easily enough. More documentation can be found at http://msdn.microsoft.com/en-us/library/ba2a6d06.aspx

This may help you: Colorized ruby output

setTimeout may help out here

$("#message_link").click(function(){
   setTimeout(function() {
       if (some_conditions...){
           $("#header").append("<div><img alt=\"Loader\"src=\"/images/ajax-loader.gif\"  /></div>");
       }
   }, 100);
});

That will cause the div to be appended ~100ms after the click event occurs, if some_conditions are met.

One can skip grep like this:

ls ~/Linux/Old/ -QI Tux.png | xargs -I{} mv ~/Linux/Old/{} ~/Linux/New/

The normalize function from the BBMisc package was the right tool for me since it can deal with NA values.

Here is how to use it:

Given the following dataset,

    ASR_API     <- c("CV",  "F",    "IER",  "LS-c", "LS-o")
    Human       <- c(NA,    5.8,    12.7,   NA, NA)
    Google      <- c(23.2,  24.2,   16.6,   12.1,   28.8)
    GoogleCloud <- c(23.3,  26.3,   18.3,   12.3,   27.3)
    IBM     <- c(21.8,  47.6,   24.0,   9.8,    25.3)
    Microsoft   <- c(29.1,  28.1,   23.1,   18.8,   35.9)
    Speechmatics    <- c(19.1,  38.4,   21.4,   7.3,    19.4)
    Wit_ai      <- c(35.6,  54.2,   37.4,   19.2,   41.7)
    dt     <- data.table(ASR_API,Human, Google, GoogleCloud, IBM, Microsoft, Speechmatics, Wit_ai)
> dt
   ASR_API Human Google GoogleCloud  IBM Microsoft Speechmatics Wit_ai
1:      CV    NA   23.2        23.3 21.8      29.1         19.1   35.6
2:       F   5.8   24.2        26.3 47.6      28.1         38.4   54.2
3:     IER  12.7   16.6        18.3 24.0      23.1         21.4   37.4
4:    LS-c    NA   12.1        12.3  9.8      18.8          7.3   19.2
5:    LS-o    NA   28.8        27.3 25.3      35.9         19.4   41.7

normalized values can be obtained like this:

> dtn <- normalize(dt, method = "standardize", range = c(0, 1), margin = 1L, on.constant = "quiet")
> dtn
   ASR_API      Human     Google GoogleCloud         IBM  Microsoft Speechmatics      Wit_ai
1:      CV         NA  0.3361245   0.2893457 -0.28468670  0.3247336  -0.18127203 -0.16032655
2:       F -0.7071068  0.4875320   0.7715885  1.59862532  0.1700986   1.55068347  1.31594762
3:     IER  0.7071068 -0.6631646  -0.5143923 -0.12409420 -0.6030768   0.02512682 -0.01746131
4:    LS-c         NA -1.3444981  -1.4788780 -1.16064578 -1.2680075  -1.24018782 -1.46198764
5:    LS-o         NA  1.1840062   0.9323361 -0.02919864  1.3762521  -0.15435044  0.32382788

where hand calculated method just ignores colmuns containing NAs:

> dt %>% mutate(normalizedHuman = (Human - mean(Human))/sd(Human)) %>% 
+ mutate(normalizedGoogle = (Google - mean(Google))/sd(Google)) %>% 
+ mutate(normalizedGoogleCloud = (GoogleCloud - mean(GoogleCloud))/sd(GoogleCloud)) %>% 
+ mutate(normalizedIBM = (IBM - mean(IBM))/sd(IBM)) %>% 
+ mutate(normalizedMicrosoft = (Microsoft - mean(Microsoft))/sd(Microsoft)) %>% 
+ mutate(normalizedSpeechmatics = (Speechmatics - mean(Speechmatics))/sd(Speechmatics)) %>% 
+ mutate(normalizedWit_ai = (Wit_ai - mean(Wit_ai))/sd(Wit_ai))
  ASR_API Human Google GoogleCloud  IBM Microsoft Speechmatics Wit_ai normalizedHuman normalizedGoogle
1      CV    NA   23.2        23.3 21.8      29.1         19.1   35.6              NA        0.3361245
2       F   5.8   24.2        26.3 47.6      28.1         38.4   54.2              NA        0.4875320
3     IER  12.7   16.6        18.3 24.0      23.1         21.4   37.4              NA       -0.6631646
4    LS-c    NA   12.1        12.3  9.8      18.8          7.3   19.2              NA       -1.3444981
5    LS-o    NA   28.8        27.3 25.3      35.9         19.4   41.7              NA        1.1840062
  normalizedGoogleCloud normalizedIBM normalizedMicrosoft normalizedSpeechmatics normalizedWit_ai
1             0.2893457   -0.28468670           0.3247336            -0.18127203      -0.16032655
2             0.7715885    1.59862532           0.1700986             1.55068347       1.31594762
3            -0.5143923   -0.12409420          -0.6030768             0.02512682      -0.01746131
4            -1.4788780   -1.16064578          -1.2680075            -1.24018782      -1.46198764
5             0.9323361   -0.02919864           1.3762521            -0.15435044       0.32382788

(normalizedHuman is made a list of NAs ...)

regarding the selection of specific columns for calculation, a generic method can be employed like this one:

data_vars <- df_full %>% dplyr::select(-ASR_API,-otherVarNotToBeUsed)
meta_vars <- df_full %>% dplyr::select(ASR_API,otherVarNotToBeUsed)
data_varsn <- normalize(data_vars, method = "standardize", range = c(0, 1), margin = 1L, on.constant = "quiet")
dtn <- cbind(meta_vars,data_varsn)

log4j does not support this directly.

As you do not want a configuration file, you most likely use programmatic configuration. I would suggest that you look into scanning all the system properties, and explicitly program what you want based on this.

$('#div').scroll(function () {
   if ($(this).scrollTop() + $(this).innerHeight() >= $(this)[0].scrollHeight-1) {

     //fire your event


    }
}

let storyBoard: UIStoryboard = UIStoryboard(name: "Main", bundle: nil)
let home = storyBoard.instantiateViewController(withIdentifier: "HOMEVC") as! HOMEVC
navigationController?.pushViewController(home, animated: true);

Note that, for PIPE being any command or sequence of commands, then:

if PIPE ; then
  # do one thing if PIPE returned with zero status ($?=0)
else 
  # do another thing if PIPE returned with non-zero status ($?!=0), e.g. error
fi 

For the record, [ expr ] is a shell builtin^† shorthand for test expr.

Since grep returns with status 0 in case of a match, and non-zero status in case of no matches, you can use:

if grep -lq '^MYSQL_ROLE=master' ; then 
  # do one thing 
else 
  # do another thing
fi 

Note the use of -l which only cares about the file having at least one match (so that grep returns as soon as it finds one match, without needlessly continuing to parse the input file.)

^†on some platforms [ expr ] is not a builtin, but an actual executable /bin/[ (whose last argument will be ]), which is why [ expr ] should contain blanks around the square brackets, and why it must be followed by one of the command list separators (;, &&, ||, |, &, newline)

You have a version conflict, please verify whether compiled version and JVM of Tomcat version are same. you can do it by examining tomcat startup .bat , looking for JAVA_HOME

You were on the right track with response.getOutputStream(), but you're not using its output anywhere in your code. Essentially what you need to do is to stream the PDF file's bytes directly to the output stream and flush the response. In Spring you can do it like this:

@RequestMapping(value="/getpdf", method=RequestMethod.POST)
public ResponseEntity<byte[]> getPDF(@RequestBody String json) {
    // convert JSON to Employee 
    Employee emp = convertSomehow(json);

    // generate the file
    PdfUtil.showHelp(emp);

    // retrieve contents of "C:/tmp/report.pdf" that were written in showHelp
    byte[] contents = (...);

    HttpHeaders headers = new HttpHeaders();
    headers.setContentType(MediaType.APPLICATION_PDF);
    // Here you have to set the actual filename of your pdf
    String filename = "output.pdf";
    headers.setContentDispositionFormData(filename, filename);
    headers.setCacheControl("must-revalidate, post-check=0, pre-check=0");
    ResponseEntity<byte[]> response = new ResponseEntity<>(contents, headers, HttpStatus.OK);
    return response;
}

Notes:

• use meaningful names for your methods: naming a method that writes a PDF document showHelp is not a good idea
• reading a file into a byte[]: example here
• I'd suggest adding a random string to the temporary PDF file name inside showHelp() to avoid overwriting the file if two users send a request at the same time

I'm not 100% entirely sure how you want to "grab" the values. But if you want to iterate over the checkboxes you can use .each like so:

("input[@name='user_group[]']").each( function() {
    alert($(this).val());
});

Of course a better selector is available:

$(':checkbox')

Here is the right anwser:

ADD_EXECUTABLE(your_executable ${source_files})

TARGET_LINK_LIBRARIES( your_executable
pthread
)

equivalent to

-lpthread

I have edited the "Best answer" code, though I found a useful thing that was missing. This is will also track the ip of a user if they are using a Proxy or simply if the server has nginx installed as a proxy reverser.

I added this code to his script at the top of the function:

function getRealIpAddr()
{
    if (!empty($_SERVER['HTTP_CLIENT_IP']))   //check ip from share internet
    {
      $ip=$_SERVER['HTTP_CLIENT_IP'];
    }
    elseif (!empty($_SERVER['HTTP_X_FORWARDED_FOR']))   //to check ip is pass from proxy
    {
      $ip=$_SERVER['HTTP_X_FORWARDED_FOR'];
    }
    else
    {
      $ip=$_SERVER['REMOTE_ADDR'];
    }
    return $ip;
}
$adresseip = getRealIpAddr();

Afther that I edited his code.

Find the line that says the following:

// get the user name if it is logged, or the visitors IP (and add the identifier)

    $uvon = isset($_SESSION['nume']) ? $_SESSION['nume'] : $_SERVER['SERVER_ADDR']. $vst_id;

and replace it with this:

$uvon = isset($_SESSION['nume']) ? $_SESSION['nume'] : $adresseip. $vst_id;

This will work.

Here is the full code if anything happens:

<?php

function getRealIpAddr()
{
    if (!empty($_SERVER['HTTP_CLIENT_IP']))   //check ip from share internet
    {
      $ip=$_SERVER['HTTP_CLIENT_IP'];
    }
    elseif (!empty($_SERVER['HTTP_X_FORWARDED_FOR']))   //to check ip is pass from proxy
    {
      $ip=$_SERVER['HTTP_X_FORWARDED_FOR'];
    }
    else
    {
      $ip=$_SERVER['REMOTE_ADDR'];
    }
    return $ip;
}
$adresseip = getRealIpAddr();

// Script Online Users and Visitors - http://coursesweb.net/php-mysql/
if(!isset($_SESSION)) session_start();        // start Session, if not already started

$filetxt = 'userson.txt';  // the file in which the online users /visitors are stored
$timeon = 120;             // number of secconds to keep a user online
$sep = '^^';               // characters used to separate the user name and date-time
$vst_id = '-vst-';        // an identifier to know that it is a visitor, not logged user

/*
 If you have an user registration script,
 replace $_SESSION['nume'] with the variable in which the user name is stored.
 You can get a free registration script from:  http://coursesweb.net/php-mysql/register-login-script-users-online_s2
*/

// get the user name if it is logged, or the visitors IP (and add the identifier)

    $uvon = isset($_SESSION['nume']) ? $_SESSION['nume'] : $_SERVER['SERVER_ADDR']. $vst_id;

$rgxvst = '/^([0-9\.]*)'. $vst_id. '/i';         // regexp to recognize the line with visitors
$nrvst = 0;                                       // to store the number of visitors

// sets the row with the current user /visitor that must be added in $filetxt (and current timestamp)

    $addrow[] = $uvon. $sep. time();

// check if the file from $filetxt exists and is writable

    if(is_writable($filetxt)) {
      // get into an array the lines added in $filetxt
      $ar_rows = file($filetxt, FILE_IGNORE_NEW_LINES | FILE_SKIP_EMPTY_LINES);
      $nrrows = count($ar_rows);

            // number of rows

  // if there is at least one line, parse the $ar_rows array

      if($nrrows>0) {
        for($i=0; $i<$nrrows; $i++) {
          // get each line and separate the user /visitor and the timestamp
          $ar_line = explode($sep, $ar_rows[$i]);
      // add in $addrow array the records in last $timeon seconds
          if($ar_line[0]!=$uvon && (intval($ar_line[1])+$timeon)>=time()) {
            $addrow[] = $ar_rows[$i];
          }
        }
      }
    }

$nruvon = count($addrow);                   // total online
$usron = '';                                    // to store the name of logged users
// traverse $addrow to get the number of visitors and users
for($i=0; $i<$nruvon; $i++) {
 if(preg_match($rgxvst, $addrow[$i])) $nrvst++;       // increment the visitors
 else {
   // gets and stores the user's name
   $ar_usron = explode($sep, $addrow[$i]);
   $usron .= '<br/> - <i>'. $ar_usron[0]. '</i>';
 }
}
$nrusr = $nruvon - $nrvst;              // gets the users (total - visitors)

// the HTML code with data to be displayed
$reout = '<div id="uvon"><h4>Online: '. $nruvon. '</h4>Visitors: '. $nrvst. '<br/>Users: '. $nrusr. $usron. '</div>';

// write data in $filetxt
if(!file_put_contents($filetxt, implode("\n", $addrow))) $reout = 'Error: Recording file not exists, or is not writable';

// if access from <script>, with GET 'uvon=showon', adds the string to return into a JS statement
// in this way the script can also be included in .html files
if(isset($_GET['uvon']) && $_GET['uvon']=='showon') $reout = "document.write('$reout');";

echo $reout;             // output /display the result

Haven't tested this on the Sql script yet.

I'd seriously recommend installing MacVim via MacPorts (sudo port install MacVim).

When installed, MacPorts automatically updates your profile to include /opt/local/bin in your path, and so when mvim is installed as /opt/local/bin/mvim during the install of MacVim you'll find it ready to use straight away.

When you install the MacVim port the MacVim.app bundle is installed in /Applications/MacPorts for you too.

A good thing about going the MacPorts route is that you'll also be able to install git too (sudo port install git-core) and many many other ports. Highly recommended.

<?xml version="1.0" encoding="utf-8" ?>
<configuration>
  <appSettings>
    <add key="xyz" value="123" />    
  </appSettings>
</configuration>

Considering your previous example:

inventory file:

[db]
10.112.83.37

group_vars/all

data_base_url=jdbc:oracle:thin:@{{ db }}:1521/ssdenwdb

template file:

oracle_url = {{ data_base_url }}

You might want to replace your group_vars/all with

data_base_url="jdbc:oracle:thin:@{{ groups['db'][0] }}:1521/ssdenwdb"

This is a pretty clean way I guess and tricky

class A(object):
    def __init__(self, e, f, g):

        self.__dict__.update({k: v for k,v in locals().items() if k!='self'})
    def bc(self):
        print(self.f)


k = A(e=5, f=6, g=12)
k.bc() # >>>6

Simply change parent align :)

Try this one on parent properties:

text-align:center

This is how I've implemented this in my project.

function array_map_associative(callable $callback, $array) {
    /* map original array keys, and call $callable with $key and value of $key from original array. */
    return array_map(function($key) use ($callback, $array){
        return $callback($key, $array[$key]);
    }, array_keys($array));
}

C is not object oriented programming (OOP) language. So you can not use properties in OOP. Eg. There is no .length property in C. So you need to use loops for your task.

Within Crystal, you can do it by creating a formula that uses the ToNumber function. It might be a good idea to code for the possibility that the field might include non-numeric data - like so:

If NumericText ({field}) then ToNumber ({field}) else 0

Alternatively, you might find it easier to convert the field's datatype within the query used in the report.

They are bit shift operator which exists in many mainstream programming languages, << is the left shift and >> is the right shift, they can be demonstrated as the following table, assume an integer only take 1 byte in memory.

| operate | bit value | octal value |                       description                        |
| ------- | --------- | ----------- | -------------------------------------------------------- |
|         | 00000100  |           4 |                                                          |
| 4 << 2  | 00010000  |          16 | move all bits to left 2 bits, filled with 0 at the right |
| 16 >> 2 | 00000100  |           4 | move all bits to right 2 bits, filled with 0 at the left |

Map can also be used, but sometimes hard to read when you have lots of things going on.

map{ print "element $_\n" }   @array; 

Try this. I am using Jupyter notebook (OS: Ubuntu 16.04 LTS on Google Cloud Platform + on Windows). Executed following command in the Jupyter notebook to install opencv:

!pip install opencv-contrib-python    #working on both Windows and Ubuntu

After successful installation you will get following message:

Successfully installed opencv-contrib-python-4.1.0.25

Now restart the kernel and try to import opencv as:

import cv2

The same command can be used to installed opencv on Windows as well.

SOLUTION 2: try following commands to install opencv: For Ubuntu: Run following command from terminal:

sudo apt-get install libsm6 libxrender1 libfontconfig1

Restart Jupyter notebook kernel and execute following command:

!pip install opencv-contrib-python

NOTE: You can run all the above commands from the terminal as well without using '!'.

Here is the same problem.

You need to set table-layout:fixed and a suitable width on the table element, as well as overflow:hidden and white-space: nowrap on the table cells.

Examples

Fixed width columns

The width of the table has to be the same (or smaller) than the fixed width cell(s).

With one fixed width column:

* {
  box-sizing: border-box;
}
table {
  table-layout: fixed;
  border-collapse: collapse;
  width: 100%;
  max-width: 100px;
}
td {
  background: #F00;
  padding: 20px;
  overflow: hidden;
  white-space: nowrap;
  width: 100px;
  border: solid 1px #000;
}

<table>
  <tbody>
    <tr>
      <td>
        This_is_a_terrible_example_of_thinking_outside_the_box.
      </td>
    </tr>
    <tr>
      <td>
        This_is_a_terrible_example_of_thinking_outside_the_box.
      </td>
    </tr>
  </tbody>
</table>

With multiple fixed width columns:

* {
  box-sizing: border-box;
}
table {
  table-layout: fixed;
  border-collapse: collapse;
  width: 100%;
  max-width: 200px;
}
td {
  background: #F00;
  padding: 20px;
  overflow: hidden;
  white-space: nowrap;
  width: 100px;
  border: solid 1px #000;
}

<table>
  <tbody>
    <tr>
      <td>
        This_is_a_terrible_example_of_thinking_outside_the_box.
      </td>
      <td>
        This_is_a_terrible_example_of_thinking_outside_the_box.
      </td>
    </tr>
    <tr>
      <td>
        This_is_a_terrible_example_of_thinking_outside_the_box.
      </td>
      <td>
        This_is_a_terrible_example_of_thinking_outside_the_box.
      </td>
    </tr>
  </tbody>
</table>

Fixed and fluid width columns

A width for the table must be set, but any extra width is simply taken by the fluid cell(s).

With multiple columns, fixed width and fluid width:

* {
  box-sizing: border-box;
}
table {
  table-layout: fixed;
  border-collapse: collapse;
  width: 100%;
}
td {
  background: #F00;
  padding: 20px;
  border: solid 1px #000;
}
tr td:first-child {
  overflow: hidden;
  white-space: nowrap;
  width: 100px;
}

<table>
  <tbody>
    <tr>
      <td>
        This_is_a_terrible_example_of_thinking_outside_the_box.
      </td>
      <td>
        This_is_a_terrible_example_of_thinking_outside_the_box.
      </td>
    </tr>
    <tr>
      <td>
        This_is_a_terrible_example_of_thinking_outside_the_box.
      </td>
      <td>
        This_is_a_terrible_example_of_thinking_outside_the_box.
      </td>
    </tr>
  </tbody>
</table>

In your code behind, set the window's DataContext to the dictionary. In your XAML, you can write:

<ListView ItemsSource="{Binding}" />

This will bind the ListView to the dictionary.

For more complex scenarios, this would be a subset of techniques behind the MVVM pattern.

public class GPSService extends Service implements GoogleApiClient.ConnectionCallbacks, GoogleApiClient.OnConnectionFailedListener, com.google.android.gms.location.LocationListener {
    private LocationRequest mLocationRequest;
    private GoogleApiClient mGoogleApiClient;
    private static final String LOGSERVICE = "#######";

    @Override
    public void onCreate() {
        super.onCreate();
        buildGoogleApiClient();
        Log.i(LOGSERVICE, "onCreate");

    }

    @Override
    public int onStartCommand(Intent intent, int flags, int startId) {
        Log.i(LOGSERVICE, "onStartCommand");

        if (!mGoogleApiClient.isConnected())
            mGoogleApiClient.connect();
        return START_STICKY;
    }


    @Override
    public void onConnected(Bundle bundle) {
        Log.i(LOGSERVICE, "onConnected" + bundle);

        Location l = LocationServices.FusedLocationApi.getLastLocation(mGoogleApiClient);
        if (l != null) {
            Log.i(LOGSERVICE, "lat " + l.getLatitude());
            Log.i(LOGSERVICE, "lng " + l.getLongitude());

        }

        startLocationUpdate();
    }

    @Override
    public void onConnectionSuspended(int i) {
        Log.i(LOGSERVICE, "onConnectionSuspended " + i);

    }

    @Override
    public void onLocationChanged(Location location) {
        Log.i(LOGSERVICE, "lat " + location.getLatitude());
        Log.i(LOGSERVICE, "lng " + location.getLongitude());
        LatLng mLocation = (new LatLng(location.getLatitude(), location.getLongitude()));
        EventBus.getDefault().post(mLocation);

    }

    @Override
    public void onDestroy() {
        super.onDestroy();
        Log.i(LOGSERVICE, "onDestroy - Estou sendo destruido ");

    }

    @Nullable
    @Override
    public IBinder onBind(Intent intent) {
        return null;
    }

    @Override
    public void onConnectionFailed(ConnectionResult connectionResult) {
        Log.i(LOGSERVICE, "onConnectionFailed ");

    }

    private void initLocationRequest() {
        mLocationRequest = new LocationRequest();
        mLocationRequest.setInterval(5000);
        mLocationRequest.setFastestInterval(2000);
        mLocationRequest.setPriority(LocationRequest.PRIORITY_HIGH_ACCURACY);

    }

    private void startLocationUpdate() {
        initLocationRequest();

        if (ActivityCompat.checkSelfPermission(this, Manifest.permission.ACCESS_FINE_LOCATION) != PackageManager.PERMISSION_GRANTED && ActivityCompat.checkSelfPermission(this, Manifest.permission.ACCESS_COARSE_LOCATION) != PackageManager.PERMISSION_GRANTED) {
            // TODO: Consider calling
            //    ActivityCompat#requestPermissions
            // here to request the missing permissions, and then overriding
            //   public void onRequestPermissionsResult(int requestCode, String[] permissions,
            //                                          int[] grantResults)
            // to handle the case where the user grants the permission. See the documentation
            // for ActivityCompat#requestPermissions for more details.
            return;
        }
        LocationServices.FusedLocationApi.requestLocationUpdates(mGoogleApiClient, mLocationRequest, this);
    }

    private void stopLocationUpdate() {
        LocationServices.FusedLocationApi.removeLocationUpdates(mGoogleApiClient, this);

    }

    protected synchronized void buildGoogleApiClient() {
        mGoogleApiClient = new GoogleApiClient.Builder(this)
                .addOnConnectionFailedListener(this)
                .addConnectionCallbacks(this)
                .addApi(LocationServices.API)
                .build();
    }

}

The values are sent in the request body, in the format that the content type specifies.

Usually the content type is application/x-www-form-urlencoded, so the request body uses the same format as the query string:

parameter=value&also=another

When you use a file upload in the form, you use the multipart/form-data encoding instead, which has a different format. It's more complicated, but you usually don't need to care what it looks like, so I won't show an example, but it can be good to know that it exists.

The reasons why (including the data in the leaf level of the index) have been nicely explained. The reason that you give two shakes about this, is that when you run your query, if you don't have the additional columns included (new feature in SQL 2005) the SQL Server has to go to the clustered index to get the additional columns which takes more time, and adds more load to the SQL Server service, the disks, and the memory (buffer cache to be specific) as new data pages are loaded into memory, potentially pushing other more often needed data out of the buffer cache.

You can use onChange: http://www.w3schools.com/TAGS/tag_Select.asp

Copied from http://www.faqs.org/docs/htmltut/forms/_SELECT_onChange.html onChange designates a JavaScript to run when the user chooses one of the options. This means that an action is initiated immediately when the user chooses an item, not when a "submit" button is pressed.

For Unix

grep "ARCHITECTURE" $ORACLE_HOME/inventory/ContentsXML/oraclehomeproperties.xml

And the output is:

<PROPERTY NAME="ARCHITECTURE" VAL="64"/> 

For Windows

findstr "ARCHITECTURE" %ORACLE_HOME%\inventory\ContentsXML\oraclehomeproperties.xml

And the output can be:

<PROPERTY NAME="ARCHITECTURE" VAL="64"/>

I had the same problem yesterday, but I did it in a very clean way which works for both client side and server side validation.

Condition: Based on the value of other property in the model, you want to make another property required. Here is the code:

public class RequiredIfAttribute : RequiredAttribute
{
  private String PropertyName { get; set; }
  private Object DesiredValue { get; set; }

  public RequiredIfAttribute(String propertyName, Object desiredvalue)
  {
    PropertyName = propertyName;
    DesiredValue = desiredvalue;
  }

  protected override ValidationResult IsValid(object value, ValidationContext context)
  {
    Object instance = context.ObjectInstance;
    Type type = instance.GetType();
    Object proprtyvalue = type.GetProperty(PropertyName).GetValue(instance, null);
    if (proprtyvalue.ToString() == DesiredValue.ToString())
    {
      ValidationResult result = base.IsValid(value, context);
      return result;
    }
    return ValidationResult.Success;
  }
}

PropertyName is the property on which you want to make your condition
DesiredValue is the particular value of the PropertyName (property) for which your other property has to be validated for required

Say you have the following:

public enum UserType
{
  Admin,
  Regular
}

public class User
{
  public UserType UserType {get;set;}

  [RequiredIf("UserType",UserType.Admin,
              ErrorMessageResourceName="PasswordRequired", 
              ErrorMessageResourceType = typeof(ResourceString))]
  public string Password { get; set; }
}

At last but not the least, register adapter for your attribute so that it can do client side validation (I put it in global.asax, Application_Start)

DataAnnotationsModelValidatorProvider.RegisterAdapter(typeof(RequiredIfAttribute),
                                                      typeof(RequiredAttributeAdapter));

EDITED

Some people was complaining that the client side fires no matter what or it does not work. So I modified the above code to do conditional client side validation with Javascript as well. For this case you don't need to register adapter

 public class RequiredIfAttribute : ValidationAttribute, IClientValidatable
    {
        private String PropertyName { get; set; }
        private Object DesiredValue { get; set; }
        private readonly RequiredAttribute _innerAttribute;

        public RequiredIfAttribute(String propertyName, Object desiredvalue)
        {
            PropertyName = propertyName;
            DesiredValue = desiredvalue;
            _innerAttribute = new RequiredAttribute();
        }

        protected override ValidationResult IsValid(object value, ValidationContext context)
        {
            var dependentValue = context.ObjectInstance.GetType().GetProperty(PropertyName).GetValue(context.ObjectInstance, null);

            if (dependentValue.ToString() == DesiredValue.ToString())
            {
                if (!_innerAttribute.IsValid(value))
                {
                    return new ValidationResult(FormatErrorMessage(context.DisplayName), new[] { context.MemberName });
                }
            }
            return ValidationResult.Success;
        }

        public IEnumerable<ModelClientValidationRule> GetClientValidationRules(ModelMetadata metadata, ControllerContext context)
        {
            var rule = new ModelClientValidationRule
            {
                ErrorMessage = ErrorMessageString,
                ValidationType = "requiredif",
            };
            rule.ValidationParameters["dependentproperty"] = (context as ViewContext).ViewData.TemplateInfo.GetFullHtmlFieldId(PropertyName);
            rule.ValidationParameters["desiredvalue"] = DesiredValue is bool ? DesiredValue.ToString().ToLower() : DesiredValue;

            yield return rule;
        }
    }

And finally the javascript ( bundle it and renderit...put it in its own script file)

$.validator.unobtrusive.adapters.add('requiredif', ['dependentproperty', 'desiredvalue'], function (options) {
    options.rules['requiredif'] = options.params;
    options.messages['requiredif'] = options.message;
});

$.validator.addMethod('requiredif', function (value, element, parameters) {
    var desiredvalue = parameters.desiredvalue;
    desiredvalue = (desiredvalue == null ? '' : desiredvalue).toString();
    var controlType = $("input[id$='" + parameters.dependentproperty + "']").attr("type");
    var actualvalue = {}
    if (controlType == "checkbox" || controlType == "radio") {
        var control = $("input[id$='" + parameters.dependentproperty + "']:checked");
        actualvalue = control.val();
    } else {
        actualvalue = $("#" + parameters.dependentproperty).val();
    }
    if ($.trim(desiredvalue).toLowerCase() === $.trim(actualvalue).toLocaleLowerCase()) {
        var isValid = $.validator.methods.required.call(this, value, element, parameters);
        return isValid;
    }
    return true;
});

You need obviously the unobstrusive validate jQuery to be included as requirement

Bootstrap 4

Create a responsive navbar sidebar "drawer" in Bootstrap 4?
Bootstrap horizontal menu collapse to sidemenu

Bootstrap 3

I think what you're looking for is generally known as an "off-canvas" layout. Here is the standard off-canvas example from the official Bootstrap docs: http://getbootstrap.com/examples/offcanvas/

The "official" example uses a right-side sidebar the toggle off and on separately from the top navbar menu. I also found these off-canvas variations that slide in from the left and may be closer to what you're looking for..

http://www.bootstrapzero.com/bootstrap-template/off-canvas-sidebar http://www.bootstrapzero.com/bootstrap-template/facebook

I call *args "star args" or "varargs" and **kwargs "keyword args".

Another way of solving this is to use the DictReader class, which "skips" the header row and uses it to allowed named indexing.

Given "foo.csv" as follows:

FirstColumn,SecondColumn
asdf,1234
qwer,5678

Use DictReader like this:

import csv
with open('foo.csv') as f:
    reader = csv.DictReader(f, delimiter=',')
    for row in reader:
        print(row['FirstColumn'])  # Access by column header instead of column number
        print(row['SecondColumn'])

Use <f:convertDateTime>. You can nest this in any input and output component. Pattern rules are same as java.text.SimpleDateFormat.

<h:outputText value="#{someBean.dateField}" >
    <f:convertDateTime pattern="dd.MM.yyyy HH:mm" />
</h:outputText>

Try this:

module Util
module MyUtil



    def self.redondear_up(suma,cantidad, decimales=0)

        unless suma.present?
            return nil
        end


        if suma>0
            resultado= (suma.to_f/cantidad)
            return resultado.round(decimales)
        end


        return nil


    end

end 
end 

If you use the Bootstrap Collapse class sometimes {!! $text !!} is not worked for me but {{ html_entity_decode($text) }} is worked for me.

This is what worked for me on CentOS, first install:

sudo yum install postgresql postgresql-devel python-devel

On Ubuntu just use the equivilent apt-get packages.

sudo apt-get install postgresql postgresql-dev python-dev

And now include the path to your postgresql binary dir with you pip install, this should work for either Debain or RHEL based Linux:

sudo PATH=$PATH:/usr/pgsql-9.3/bin/ pip install psycopg2

Make sure to include the correct path. Thats all :)

I got similar results:

2 * (i * i): 0.458765943 s, n=119860736
2 * i * i: 0.580255126 s, n=119860736

I got the SAME results if both loops were in the same program, or each was in a separate .java file/.class, executed on a separate run.

Finally, here is a javap -c -v <.java> decompile of each:

     3: ldc           #3                  // String 2 * (i * i):
     5: invokevirtual #4                  // Method java/io/PrintStream.print:(Ljava/lang/String;)V
     8: invokestatic  #5                  // Method java/lang/System.nanoTime:()J
     8: invokestatic  #5                  // Method java/lang/System.nanoTime:()J
    11: lstore_1
    12: iconst_0
    13: istore_3
    14: iconst_0
    15: istore        4
    17: iload         4
    19: ldc           #6                  // int 1000000000
    21: if_icmpge     40
    24: iload_3
    25: iconst_2
    26: iload         4
    28: iload         4
    30: imul
    31: imul
    32: iadd
    33: istore_3
    34: iinc          4, 1
    37: goto          17

vs.

     3: ldc           #3                  // String 2 * i * i:
     5: invokevirtual #4                  // Method java/io/PrintStream.print:(Ljava/lang/String;)V
     8: invokestatic  #5                  // Method java/lang/System.nanoTime:()J
    11: lstore_1
    12: iconst_0
    13: istore_3
    14: iconst_0
    15: istore        4
    17: iload         4
    19: ldc           #6                  // int 1000000000
    21: if_icmpge     40
    24: iload_3
    25: iconst_2
    26: iload         4
    28: imul
    29: iload         4
    31: imul
    32: iadd
    33: istore_3
    34: iinc          4, 1
    37: goto          17

FYI -

java -version
java version "1.8.0_121"
Java(TM) SE Runtime Environment (build 1.8.0_121-b13)
Java HotSpot(TM) 64-Bit Server VM (build 25.121-b13, mixed mode)

You can use the C# dynamic type to make things easier. This technique also makes re-factoring simpler as it does not rely on magic-strings.

JSON

The JSON string below is a simple response from an HTTP API call, and it defines two properties: Id and Name.

{"Id": 1, "Name": "biofractal"}

C#

Use JsonConvert.DeserializeObject<dynamic>() to deserialize this string into a dynamic type then simply access its properties in the usual way.

dynamic results = JsonConvert.DeserializeObject<dynamic>(json);
var id = results.Id;
var name= results.Name;

If you specify the type of the results variable as dynamic, instead of using the var keyword, then the property values will correctly deserialize, e.g. Id to an int and not a JValue (thanks to GFoley83 for the comment below).

Note: The NuGet link for the Newtonsoft assembly is http://nuget.org/packages/newtonsoft.json.

Package: You can also add the package with nuget live installer, with your project opened just do browse package and then just install it install, unistall, update, it will just be added to your project under Dependencies/NuGet

I think the easiest way here is to preload the json or load it once on$dirty and then the filter search will take care of the rest. This'll save you the extra http calls and its much faster with preloaded data. Memory will hurt, but its worth it.

Understand this has been solved, but the solution provided above might not work in all situation.

For my case,

<div style="height: 490px; position:relative; overflow:hidden">
    <div id="map-canvas"></div>
</div>

    ffmpeg -i movie.mp4 -vf trim=3:8 cut.mp4

Drop everything except from second 3 to second 8.

TL;DR answer - There is no real solution besides "delete app and reinstall".

This answer is not satisfactory for many situations, when you have an existing database that needs to not get deleted within the app.

Lukasz and plivesey are the only ones with solutions that don't require delete, but neither worked for me.

Please check: http://man7.org/linux/man-pages/man5/proc.5.html

address           perms offset  dev   inode       pathname
00400000-00452000 r-xp 00000000 08:02 173521      /usr/bin/dbus-daemon

The address field is the address space in the process that the mapping occupies.

The perms field is a set of permissions:

 r = read
 w = write
 x = execute
 s = shared
 p = private (copy on write)

The offset field is the offset into the file/whatever;

dev is the device (major:minor);

inode is the inode on that device.0 indicates that no inode is associated with the memoryregion, as would be the case with BSS (uninitialized data).

The pathname field will usually be the file that is backing the mapping. For ELF files, you can easily coordinate with the offset field by looking at the Offset field in the ELF program headers (readelf -l).

Under Linux 2.0, there is no field giving pathname.

I liked Shoresh's answer to use set functionality to remove columns when you don't know the location, however this didn't work for my purpose as I need to keep the original column order (which has arbitrary column labels).

I got this to work though by using IndexedSet from the boltons package.

I also needed to re-add multiple column labels, so for a more general case I used the following code:

from boltons.setutils import IndexedSet
cols = list(IndexedSet(df.columns.tolist()) - set(['mean', 'std']))
cols[0:0] =['mean', 'std']
df = df[cols]

Hope this is useful to anyone searching this thread for a general solution.

The common convention would be to put it in a .sh file that looks like this -

#!/bin/bash
java -cp  ".;./supportlibraries/Framework_Core.jar;... etc

Note that '\' become '/'.

You could execute as

sh myfile.sh

or set the x bit on the file

chmod +x myfile.sh

and then just call

myfile.sh

Open a separate terminal and start adb with logcat. On my (linux) system;

~/android-studio/sdk/platform-tools/adb logcat

 <Label x:Name="datetimeofmsg" 
           HorizontalAlignment="Left" Margin="4.286,55,0,0" 
           VerticalAlignment="Top" Background="{x:Null}" 
           FontWeight="Bold" Width="61.714" Height="20" Foreground="White">
        <Label.Content>
            <AccessText TextWrapping="Wrap"/>
        </Label.Content>
    </Label>

I wrote this a while ago to remind myself of what a closure is and how it works in JS.

A closure is a function that, when called, uses the scope in which it was declared, not the scope in which it was called. In javaScript, all functions behave like this. Variable values in a scope persist as long as there is a function that still points to them. The exception to the rule is 'this', which refers to the object that the function is inside when it is called.

var z = 1;
function x(){
    var z = 2; 
    y(function(){
      alert(z);
    });
}
function y(f){
    var z = 3;
    f();
}
x(); //alerts '2' 

You could do this:

InputStream in = new ByteArrayInputStream(string.getBytes("UTF-8"));

Note the UTF-8 encoding. You should specify the character set that you want the bytes encoded into. It's common to choose UTF-8 if you don't specifically need anything else. Otherwise if you select nothing you'll get the default encoding that can vary between systems. From the JavaDoc:

The behavior of this method when this string cannot be encoded in the default charset is unspecified. The CharsetEncoder class should be used when more control over the encoding process is required.

I'm surprised that no one seems to have pointed out that one can pass a dictionary of keyed argument parameters, that satisfy the formal parameters, like so.

>>> def func(a='a', b='b', c='c', **kwargs):
...    print 'a:%s, b:%s, c:%s' % (a, b, c)
... 
>>> func()
a:a, b:b, c:c
>>> func(**{'a' : 'z', 'b':'q', 'c':'v'})
a:z, b:q, c:v
>>> 

IF you're able to build your app from a PC, but you don't recall the password, here's what you can do to retrieve the password:

Method 1:

In your build.gradle, add println MYAPP_RELEASE_KEY_PASSWORD as below:

signingConfigs {
    release {
        if (project.hasProperty('MYAPP_RELEASE_STORE_FILE')) {
            storeFile file(MYAPP_RELEASE_STORE_FILE)
            storePassword MYAPP_RELEASE_STORE_PASSWORD
            keyAlias MYAPP_RELEASE_KEY_ALIAS
            keyPassword MYAPP_RELEASE_KEY_PASSWORD
            println MYAPP_RELEASE_KEY_PASSWORD
        }
    }
}

After that, run cd android && ./gradlew assembleRelease

Method 2:

Run keytool -list -v -keystore your <.keystore file path> e.g. keytool -list -v -keystore ./app/my-app-key.keystore.

It will ask for you to Enter keystore password: Just press enter key here. and you will be able to find mapped to Alias name:

Then, run grep -rn "<your alias name>" . in your terminal and you will be able to see your signing.json file as below:

./app/build/intermediates/signing_config/release/out/signing-config.json

The file will have your password in json format with key "mKeyPassword":" < your password > "

<strong> and <em> add extra semantic meaning to your document. It just so happens that they also give a bold and italic style to your text.

You could of course override their styling with CSS.

<b> and <i> on the other hand only apply font styling and should no longer be used. (Because you're supposed to format with CSS, and if the text was actually important then you would probably make it "strong" or "emphasised" anyway!)

Hope that makes sense.

I detected the peaks using a local maximum filter. Here is the result on your first dataset of 4 paws:

I also ran it on the second dataset of 9 paws and it worked as well.

Here is how you do it:

import numpy as np
from scipy.ndimage.filters import maximum_filter
from scipy.ndimage.morphology import generate_binary_structure, binary_erosion
import matplotlib.pyplot as pp

#for some reason I had to reshape. Numpy ignored the shape header.
paws_data = np.loadtxt("paws.txt").reshape(4,11,14)

#getting a list of images
paws = [p.squeeze() for p in np.vsplit(paws_data,4)]


def detect_peaks(image):
    """
    Takes an image and detect the peaks usingthe local maximum filter.
    Returns a boolean mask of the peaks (i.e. 1 when
    the pixel's value is the neighborhood maximum, 0 otherwise)
    """

    # define an 8-connected neighborhood
    neighborhood = generate_binary_structure(2,2)

    #apply the local maximum filter; all pixel of maximal value 
    #in their neighborhood are set to 1
    local_max = maximum_filter(image, footprint=neighborhood)==image
    #local_max is a mask that contains the peaks we are 
    #looking for, but also the background.
    #In order to isolate the peaks we must remove the background from the mask.

    #we create the mask of the background
    background = (image==0)

    #a little technicality: we must erode the background in order to 
    #successfully subtract it form local_max, otherwise a line will 
    #appear along the background border (artifact of the local maximum filter)
    eroded_background = binary_erosion(background, structure=neighborhood, border_value=1)

    #we obtain the final mask, containing only peaks, 
    #by removing the background from the local_max mask (xor operation)
    detected_peaks = local_max ^ eroded_background

    return detected_peaks


#applying the detection and plotting results
for i, paw in enumerate(paws):
    detected_peaks = detect_peaks(paw)
    pp.subplot(4,2,(2*i+1))
    pp.imshow(paw)
    pp.subplot(4,2,(2*i+2) )
    pp.imshow(detected_peaks)

pp.show()

All you need to do after is use scipy.ndimage.measurements.label on the mask to label all distinct objects. Then you'll be able to play with them individually.

Note that the method works well because the background is not noisy. If it were, you would detect a bunch of other unwanted peaks in the background. Another important factor is the size of the neighborhood. You will need to adjust it if the peak size changes (the should remain roughly proportional).

Print first four characters:

printf("%.4s\n", "A string that is more than 8 chars");

See this link for more information (check .precision -section)

Use the IdentityFile parameter in your ~/.ssh/config:

Host github.com
    HostName github.com
    IdentityFile ~/.ssh/github.rsa
    User petdance

I think it should be the case. To erase the character, you should use replace(".", "") instead.

Here is a bit improved version of shekwi's query.
It generates the primary key constraint and is able to handle temporary tables:

with pkey as
(
    select cc.conrelid, format(E',
    constraint %I primary key(%s)', cc.conname,
        string_agg(a.attname, ', ' 
            order by array_position(cc.conkey, a.attnum))) pkey
    from pg_catalog.pg_constraint cc
        join pg_catalog.pg_class c on c.oid = cc.conrelid
        join pg_catalog.pg_attribute a on a.attrelid = cc.conrelid 
            and a.attnum = any(cc.conkey)
    where cc.contype = 'p'
    group by cc.conrelid, cc.conname
)
select format(E'create %stable %s%I\n(\n%s%s\n);\n',
    case c.relpersistence when 't' then 'temporary ' else '' end,
    case c.relpersistence when 't' then '' else n.nspname || '.' end,
    c.relname,
    string_agg(
        format(E'\t%I %s%s',
            a.attname,
            pg_catalog.format_type(a.atttypid, a.atttypmod),
            case when a.attnotnull then ' not null' else '' end
        ), E',\n'
        order by a.attnum
    ),
    (select pkey from pkey where pkey.conrelid = c.oid)) as sql
from pg_catalog.pg_class c
    join pg_catalog.pg_namespace n on n.oid = c.relnamespace
    join pg_catalog.pg_attribute a on a.attrelid = c.oid and a.attnum > 0
    join pg_catalog.pg_type t on a.atttypid = t.oid
where c.relname = :table_name
group by c.oid, c.relname, c.relpersistence, n.nspname;

Use table_name parameter to specify the name of the table.

If using Visual Studio 2012 and later (which uses .NET regular expressions), you can remove trailing whitespace without removing blank lines by using the following regex

Replace (?([^\r\n])\s)+(\r?\n)

With $1

Some explanation

The reason you need the rather complicated expression is that the character class \s matches spaces, tabs and newline characters, so \s+ will match a group of lines containing only whitespace. It doesn't help adding a $ termination to this regex, because this will still match a group of lines containing only whitespace and newline characters.

You may also want to know (as I did) exactly what the (?([^\r\n])\s) expression means. This is an Alternation Construct, which effectively means match to the whitespace character class if it is not a carriage return or linefeed.

Alternation constructs normally have a true and false part,

(?( expression ) yes | no )

but in this case the false part is not specified.

Using the class:

import android.provider.MediaStore.Video.Thumbnails;

We can get two preview thumbnail sizes from the video:

Thumbnails.MICRO_KIND for 96 x 96

Thumbnails.MINI_KIND for 512 x 384 px

This is a code example:

String filePath = "/sdcard/DCIM/Camera/my_video.mp4"; //change the location of your file!

ImageView imageview_mini = (ImageView)findViewById(R.id.thumbnail_mini);
ImageView imageview_micro = (ImageView)findViewById(R.id.thumbnail_micro);

Bitmap bmThumbnail;

//MICRO_KIND, size: 96 x 96 thumbnail
bmThumbnail = ThumbnailUtils.createVideoThumbnail(filePath, Thumbnails.MICRO_KIND);
imageview_micro.setImageBitmap(bmThumbnail);
     
// MINI_KIND, size: 512 x 384 thumbnail 
bmThumbnail = ThumbnailUtils.createVideoThumbnail(filePath, Thumbnails.MINI_KIND);
imageview_mini.setImageBitmap(bmThumbnail);

$(document).ready(function() {
    $('#id').focus();
});

If you need a lambda to remember state between calls, I would recommend either a function declared in the local namespace or a class with an overloaded __call__. Now that all my cautions against what you are trying to do is out of the way, we can get to an actual answer to your query.

If you really need to have your lambda to have some memory between calls, you can define it like:

f = lambda o, ns = {"flag":True}: [ns["flag"] or o.name, ns.__setitem__("flag", ns["flag"] and o.name)][0]

Then you just need to pass f to filter(). If you really need to, you can get back the value of flag with the following:

f.__defaults__[0]["flag"]

Alternatively, you can modify the global namespace by modifying the result of globals(). Unfortunately, you cannot modify the local namespace in the same way as modifying the result of locals() doesn't affect the local namespace.

The one place I've run across it is in containers which allocate a contiguous buffer and then fill it with objects as required. As mentioned, std::vector might do this, and I know some versions of MFC CArray and/or CList did this (because that's where I first ran across it). The buffer over-allocation method is a very useful optimization, and placement new is pretty much the only way to construct objects in that scenario. It is also used sometimes to construct objects in memory blocks allocated outside of your direct code.

I have used it in a similar capacity, although it doesn't come up often. It's a useful tool for the C++ toolbox, though.

My soluthion:

var $dateInput = $('#dateInput');

$dateInput.datepicker({
    onSelect: function(f,d,i){
        if(d !== i.lastVal){
            $dateInput.trigger("change");
        }
    }
}).data('datepicker');

$dateInput.on("change", function () {
   //your code
});

not() is a function in xpath (as opposed to an operator), so

//a[not(contains(@id, 'xx'))]

I know the answer has been accepted already. But, just in case anyone using Maven wants to achieve the same thing, just set the finalName in the maven build to whatever name you want to give and do a maven -> update project

<build>
    <finalName><any-name></finalName>
    <plugins><provide-plugins-needed></plugins>
<build>

After not finding anything to get around "Object must implement IConvertible" exception when using Zyphrax's answer (except for implementing the interface).. I tried something a little bit unconventional and worked for my situation.

Using the Newtonsoft.Json nuget package...

var castedObject = JsonConvert.DeserializeObject(JsonConvert.SerializeObject(myObject), myType);

This way you only need to free the structure because the fields are arrays with static sizes which will be allocated as part of the structure. This is also the reason that the addresses you see match: the array is the first thing in that structure. If you declared the fields as char * you would have to manually malloc and free them as well.

Starting from Laravel 5.3 you can simply use :

if ($mentor->isNotEmpty()) {
//do something.
}

Documentation https://laravel.com/docs/5.5/collections#method-isnotempty

Not sure if this is still relevant, but I use this way

Public bEnableEvents As Boolean
Public bclickok As Boolean
Public booRestoreErrorChecking As Boolean   'put this at the top of the module

 Private Declare Function apiGetComputerName Lib "kernel32" Alias _
"GetComputerNameA" (ByVal lpBuffer As String, nSize As Long) As Long
Private Declare Function apiGetUserName Lib "advapi32.dll" Alias _
"GetUserNameA" (ByVal lpBuffer As String, nSize As Long) As Long

Function GetUserID() As String
' Returns the network login name
On Error Resume Next
Dim lngLen As Long, lngX As Long
Dim strUserName As String
strUserName = String$(254, 0)
lngLen = 255
lngX = apiGetUserName(strUserName, lngLen)
If lngX <> 0 Then
    GetUserID = Left$(strUserName, lngLen - 1)
Else
    GetUserID = ""
End If
Exit Function
End Function

This next bit I save file as PDF, but can change to suit

Public Sub SaveToDesktop()
Dim LoginName As String
LoginName = UCase(GetUserID)

ChDir "C:\Users\" & LoginName & "\Desktop\"
Debug.Print LoginName
ActiveSheet.ExportAsFixedFormat Type:=xlTypePDF, Filename:= _
    "C:\Users\" & LoginName & "\Desktop\MyFileName.pdf", Quality:=xlQualityStandard, _
    IncludeDocProperties:=True, IgnorePrintAreas:=False, OpenAfterPublish:= _
    True
End Sub

I ran across this while on a hunt for answers myself after attempting to follow a guide using pm2. The goal is to automatically start a node.js application on a server. Some guides call out using pm2 startup systemd, which is the path that leads to the question of using systemctl on Ubuntu 14.04. Instead, use pm2 startup ubuntu.

Source: https://www.digitalocean.com/community/tutorials/how-to-set-up-a-node-js-application-for-production-on-ubuntu-14-04

There's a KVC Object Operator that offers a more elegant solution uniquearray = [yourarray valueForKeyPath:@"@distinctUnionOfObjects.self"]; Here's an NSArray category.

You can't change the build output folder name with the current configuration options.

Moreover, you shouldn't. This is a part of the philosophy behind create-react-app: they say Convention over Configuration.

If you really need to rename your folder, I see two options:

1. Right after the build process finishes, write a command that copies the build folder content to another folder you want. For example you can try the copyfiles npm package, or anything similar.

2. You could try to eject create-react-app and tweak the configuration.

   If you aren’t satisfied with the build tool and configuration choices, you can eject at any time. This command will remove the single build dependency from your project.

   Instead, it will copy all the configuration files and the transitive dependencies (Webpack, Babel, ESLint, etc) right into your project so you have full control over them. All of the commands except eject will still work, but they will point to the copied scripts so you can tweak them. At this point you’re on your own.

   However, it is important to note that this is a one-way operation. Once you eject, you can’t go back! You loose all future updates.

Therefore, I'd recommend you to not use a custom folder naming, if possible. Try to stick with the default naming. If not an option, try #1. If it still doesn't work for your specific use-case and you're really out of options - explore #2. Good luck!

None of these worked for me in Ubuntu 16.4.

The simplest approach is to encapsulate the two values together into a type which has both the image and the file. Then build an ArrayList of that and shuffle it.

That improves encapsulation as well, giving you the property that you'll always have the same number of files as images automatically.

An alternative if you really don't like that idea would be to write the shuffle code yourself (there are plenty of examples of a modified Fisher-Yates shuffle in Java, including several on Stack Overflow I suspect) and just operate on both lists at the same time. But I'd strongly recommend going with the "improve encapsulation" approach.

You should learn about EAFP vs LBYL.

from sys import stdin, stdout
def main(infile=stdin, outfile=stdout):
    if isinstance(infile, basestring):
        infile=open(infile,'r')
    if isinstance(outfile, basestring):
        outfile=open(outfile,'w')
    for lineno, line in enumerate(infile, 1):
        line = line.strip()
         try:
             print >>outfile, int(line,16)
         except ValueError:
             return "Bad value at line %i: %r" % (lineno, line)

if __name__ == "__main__":
    from sys import argv, exit
    exit(main(*argv[1:]))

Found this in another thread that helped me: Use xp_cmdshell and sqlcmd Is it possible to execute a text file from SQL query? - by Gulzar Nazim

EXEC xp_cmdshell  'sqlcmd -S ' + @DBServerName + ' -d  ' + @DBName + ' -i ' + @FilePathName

Firstly, using on* attributes to add event handlers is a very outdated way of achieving what you want. As you've tagged your question with jQuery, here's a jQuery implementation:

<div id="foo">hello world!</div>
<img src="zoom.png" id="image" />

$('#image').click(function() {
    $('#foo').css({
        'background-color': 'red',
        'color': 'white',
        'font-size': '44px'
    });
});

A more efficient method is to put those styles into a class, and then add that class onclick, like this:

$('#image').click(function() {
  $('#foo').addClass('myClass');
});

.myClass {
  background-color: red;
  color: white;
  font-size: 44px;
}

<script src="https://ajax.googleapis.com/ajax/libs/jquery/3.2.1/jquery.min.js"></script>
<div id="foo">hello world!</div>
<img src="https://i.imgur.com/9zbkKVz.png?1" id="image" />

Here's a plain Javascript implementation of the above for those who require it:

document.querySelector('#image').addEventListener('click', () => {
  document.querySelector('#foo').classList.add('myClass');
}); 

.myClass {
  background-color: red;
  color: white;
  font-size: 44px;
}

<div id="foo">hello world!</div>
<img src="https://i.imgur.com/9zbkKVz.png?1" id="image" />

First, repeat this mantra for a little while: "unused memory is wasted memory". The Linux kernel keeps around huge amounts of file metadata and files that were requested, until something that looks more important pushes that data out. It's why you can run:

find /home -type f -name '*.mp3'
find /home -type f -name '*.aac'

and have the second find instance run at ridiculous speed.

Linux only leaves a little bit of memory 'free' to handle spikes in memory usage without too much effort.

Second, you want to find the processes that are eating all your memory; in top use the M command to sort by memory use. Feel free to ignore the VIRT column, that just tells you how much virtual memory has been allocated, not how much memory the process is using. RES reports how much memory is resident, or currently in ram (as opposed to swapped to disk or never actually allocated in the first place, despite being requested).

But, since RES will count e.g. /lib/libc.so.6 memory once for nearly every process, it isn't exactly an awesome measure of how much memory a process is using. The SHR column reports how much memory is shared with other processes, but there is no guarantee that another process is actually sharing -- it could be sharable, just no one else wants to share.

The smem tool is designed to help users better gage just how much memory should really be blamed on each individual process. It does some clever work to figure out what is really unique, what is shared, and proportionally tallies the shared memory to the processes sharing it. smem may help you understand where your memory is going better than top will, but top is an excellent first tool.

Responsive CSS option to center a button vertically and horizontally without being concerned with parent element size (using data attribute hooks for clarity and separation concerns):

HTML

<div data-element="card">
  <div data-container="button"><button>CTA...</button></div>
</div>

CSS

[data-container="button"] {
  position: absolute;
  top: 50%;
  text-align: center;
  width: 100%;
}

Fiddle: https://jsfiddle.net/crrollyson/zebo1z8f/

Use onunload.

For jQuery, I think this works like so:

$(window).unload(function() { 
  alert("Unloading"); 
  return falseIfYouWantToButBeCareful();
});

My Thought,

Implicit Wait : If wait is set, it will wait for specified amount of time for each findElement/findElements call. It will throw an exception if action is not complete.

Explicit Wait : If wait is set, it will wait and move on to next step when the provided condition becomes true else it will throw an exception after waiting for specified time. Explicit wait is applicable only once wherever specified.

Is there something that prevents you from merging all revisions on trunk since the last merge?

svn merge -rLastRevisionMergedFromTrunkToBranch:HEAD url/of/trunk path/to/branch/wc

should work just fine. At least if you want to merge all changes on trunk to your branch.

In the future one would use left: unset; for unsetting the value of left.

As of today 4 nov 2014 unset is only supported in Firefox.

Read more about unset in MDN.

My guess is we'll be able to use it around year 2022 when IE 11 is properly phased out.

Install the CSS Usage add-on for Firebug and run it on that page. It will tell you which styles are being used and not used by that page.

1. Declare the variable
2. Set it by your command and add dynamic parts like use parameter values of sp(here @IsMonday and @IsTuesday are sp params)

3. execute the command

   declare  @sql varchar (100)
   set @sql ='select * from #td1'
   
   if (@IsMonday+@IsTuesday !='')
   begin
   set @sql= @sql+' where PickupDay in ('''+@IsMonday+''','''+@IsTuesday+''' )'
   end
   exec( @sql)
   

A pt is 1/72th of an inch and is a useless measure for anything that is rendered on a device which doesn't calculate the DPI correctly. This makes it a reasonable choice for printing and a dreadful choice for use on screen.

A px is a pixel, which will map on to a screen pixel in most cases.

CSS provides a bunch of other units, and which one you should choose depends on what you are setting the size of.

A pixel is great if you need to size something to match an image, or if you want a thin border.

Percentages are great for font sizes as, if you use them consistently, you get font sizes proportional to the user's preference.

Ems are great when you want an element to size itself based on the font size (so a paragraph might get wider if the font size is larger)

… and so on.

Here is an example of iterating over a pd.DataFrame grouped by the column atable. For this sample, "create" statements for an SQL database are generated within the for loop:

import pandas as pd

df1 = pd.DataFrame({
    'atable':     ['Users', 'Users', 'Domains', 'Domains', 'Locks'],
    'column':     ['col_1', 'col_2', 'col_a', 'col_b', 'col'],
    'column_type':['varchar', 'varchar', 'int', 'varchar', 'varchar'],
    'is_null':    ['No', 'No', 'Yes', 'No', 'Yes'],
})

df1_grouped = df1.groupby('atable')

# iterate over each group
for group_name, df_group in df1_grouped:
    print('\nCREATE TABLE {}('.format(group_name))

    for row_index, row in df_group.iterrows():
        col = row['column']
        column_type = row['column_type']
        is_null = 'NOT NULL' if row['is_null'] == 'NO' else ''
        print('\t{} {} {},'.format(col, column_type, is_null))

    print(");")

Please try this one works for me:

<ImageView android:id="@+id/image_view"     
  android:layout_width="wrap_content"  
  android:layout_height="wrap_content"  
  android:adjustViewBounds="true"  
  android:maxWidth="60dp" 
  android:layout_gravity="center" 
  android:maxHeight="60dp"  
  android:scaleType="fitCenter"  
  android:src="@drawable/icon"  
  /> 

For Google Chrome (Tested on ver. 62)

I was trying to keep a socket connection alive from the google chrome's fetch API to a remote express server and found the request headers have to match Node.JS's native <net.socket> connection settings.

I set the headers object on my client-side script with the following options:

/* ----- */
head = new headers();
head.append("Connnection", "keep-alive")
head.append("Keep-Alive", `timeout=${1*60*5}`) //in seconds, not milliseconds
/* apply more definitions to the header */
fetch(url, {
    method: 'OPTIONS',
    credentials: "include",
    body: JSON.stringify(data),
    cors: 'cors',
    headers: head, //could be object literal too
    cache: 'default'
 })
 .then(response=>{
    ....
  }).catch(err=>{...});

And on my express server I setup my router as follows:

 router.head('absolute or regex', (request, response, next)=>{
  req.setTimeout(1000*60*5, ()=>{
     console.info("socket timed out");
   });
  console.info("Proceeding down the middleware chain link...\n\n");
  next();
 });

 /*Keep the socket alive by enabling it on the server, with an optional 
  delay on the last packet sent 
 */
server.on('connection', (socket)=>socket.setKeepAlive(true, 10))

WARNING

Please use common sense and make sure the users you're keeping the socket connection open to is validated and serialized. It works for Firefox as well, but it's really vulnerable if you keep the TCP connection open for longer than 5 minutes.

I'm not sure how some of the lesser known browsers operate, but I'll append to this answer with the Microsoft browser details as well.

I don't think the standard HTML select will display HTML content. I'd suggest checking out Bootstrap select: http://silviomoreto.github.io/bootstrap-select/

It has several options for displaying icons or other HTML markup in the select.

<select id="mySelect" data-show-icon="true">
  <option data-content="<i class='glyphicon glyphicon-cutlery'></i>">-</option>
  <option data-subtext="<i class='glyphicon glyphicon-eye-open'></i>"></option>
  <option data-subtext="<i class='glyphicon glyphicon-heart-empty'></i>"></option>
  <option data-subtext="<i class='glyphicon glyphicon-leaf'></i>"></option>
  <option data-subtext="<i class='glyphicon glyphicon-music'></i>"></option>
  <option data-subtext="<i class='glyphicon glyphicon-send'></i>"></option>
  <option data-subtext="<i class='glyphicon glyphicon-star'></i>"></option>
</select>

Here is a demo: https://www.codeply.com/go/l6ClKGBmLS

workignHoursListView.setOnItemClickListener(new AdapterView.OnItemClickListener() {
    @Override
    public void onItemClick(AdapterView<?> parent,View view, int position, long id) {
        viewtype yourview=yourListViewId.getChildAt(position).findViewById(R.id.viewid);
    }
});

// convert datetime to unix epoch seconds
public static long ToUnixTime(DateTime date)
{
    var epoch = new DateTime(1970, 1, 1, 0, 0, 0, DateTimeKind.Utc);
    return Convert.ToInt64((date.ToUniversalTime() - epoch).TotalSeconds);
}

Should use ToUniversalTime() for the DateTime object.

Find config.inc file under C:\wamp\apps\phpmyadmin3.5.1 Inside this file find this one line

$cfg['Servers'][$i]['password'] =";

and replace it with

$cfg['Servers'][$i]['password'] = 'Type your root password here';

Short answer: dispatchTouchEvent() will be called first of all.

Short advice: should not override dispatchTouchEvent() since it's hard to control, sometimes it can slow down your performance. IMHO, I suggest overriding onInterceptTouchEvent().

Because most answers mention pretty clearly about the flow touch event on activity/ view group/ view, I only add more detail about code on these methods in ViewGroup (ignoring dispatchTouchEvent()):

onInterceptTouchEvent() will be called first, ACTION event will be called respectively down -> move -> up. There are 2 cases:

1. If you return false in 3 cases (ACTION_DOWN, ACTION_MOVE, ACTION_UP), it will consider as the parent won't need this touch event, so onTouch() of the parents never calls, but onTouch() of the children will call instead; however please notice:

   • The onInterceptTouchEvent() still continue to receive touch event, as long as its children don't call requestDisallowInterceptTouchEvent(true).
   • If there are no children receiving that event (it can happen in 2 cases: no children at the position the users touch, or there are children but it returns false at ACTION_DOWN), the parents will send that event back to onTouch() of the parents.

2. Vice versa, if you return true, the parent will steal this touch event immediately, and onInterceptTouchEvent() will stop immediately, instead onTouch() of the parents will be called as well as all onTouch() of children will receive the last action event - ACTION_CANCEL (thus, it means the parents stole touch event, and children cannot handle it from then on). The flow of onInterceptTouchEvent() return false is normal, but there is a little confusion with return true case, so I list it here:

   • Return true at ACTION_DOWN, onTouch() of the parents will receive ACTION_DOWN again and following actions (ACTION_MOVE, ACTION_UP).
   • Return true at ACTION_MOVE, onTouch() of the parents will receive next ACTION_MOVE (not the same ACTION_MOVE in onInterceptTouchEvent()) and following actions (ACTION_MOVE, ACTION_UP).
   • Return true at ACTION_UP, onTouch() of the parents will NOT called at all since it's too late for the parents to steal touch event.

One more thing important is ACTION_DOWN of the event in onTouch() will determine if the view would like to receive more action from that event or not. If the view returns true at ACTION_DOWN in onTouch(), it means the view is willing to receive more action from that event. Otherwise, return false at ACTION_DOWN in onTouch() will imply that the view won't receive any more action from that event.

I got it and explained in below:

//This table with two rows containing each row, one select in first td, and one input tags in second td and second input in third td;

<table id="tableID" class="table table-condensed">
       <thead>
          <tr>
             <th><label>From Group</lable></th>
             <th><label>To Group</lable></th>
             <th><label>Level</lable></th>

           </tr>
       </thead>
         <tbody>
           <tr id="rowCount">
             <td>
               <select >
                 <option value="">select</option>
                 <option value="G1">G1</option>
                 <option value="G2">G2</option>
                 <option value="G3">G3</option>
                 <option value="G4">G4</option>
               </select>
            </td>
            <td>
              <input type="text" id="" value="" readonly="readonly" />
            </td>
            <td>
              <input type="text" value=""  readonly="readonly" />
            </td>
         </tr>
         <tr id="rowCount">
          <td>
            <select >
              <option value="">select</option>
              <option value="G1">G1</option>
              <option value="G2">G2</option>
              <option value="G3">G3</option>
              <option value="G4">G4</option>
           </select>
         </td>
         <td>
           <input type="text" id="" value="" readonly="readonly" />
         </td>
         <td>
           <input type="text" value=""  readonly="readonly" />
         </td>
      </tr>
  </tbody>
</table>

  <button type="button" class="btn btn-default generate-btn search-btn white-font border-6 no-border" id="saveDtls">Save</button>


//call on click of Save button;
 $('#saveDtls').click(function(event) {

  var TableData = []; //initialize array;                           
  var data=""; //empty var;

  //Here traverse and  read input/select values present in each td of each tr, ;
  $("table#tableID > tbody > tr").each(function(row, tr) {

     TableData[row]={
        "fromGroup":  $('td:eq(0) select',this).val(),
        "toGroup": $('td:eq(1) input',this).val(),
        "level": $('td:eq(2) input',this).val()
 };

  //Convert tableData array to JsonData
  data=JSON.stringify(TableData)
  //alert('data'+data); 
  });
});

If I understand what you are asking, it is a regular expression like this:

^(8768|9875|2353)

This matches the three sets of digit strings at beginning of line only.

I ran into the same issue on Debian 9.2, this is what I did to overcome it.

Installation

sudo apt install curl
curl -sL https://deb.nodesource.com/setup_6.x | sudo bash -
sudo apt-get install -y nodejs
sudo apt-get install -y npm

Check installed versions

node --version
npm --version

Originally sourced from "How to install Node.js LTS on Debian 9 stretch" http://linuxbsdos.com/2017/06/26/how-to-install-node-js-lts-on-debian-9-stretch/

If you want to round it to lower, just cast it.

float my_float = 42.8f;
int my_int;
my_int = (int)my_float;          // => my_int=42

For other purpose, if you want to round it to nearest, you can make a little function or a define like this:

#define FLOAT_TO_INT(x) ((x)>=0?(int)((x)+0.5):(int)((x)-0.5))

float my_float = 42.8f;
int my_int;
my_int = FLOAT_TO_INT(my_float); // => my_int=43

Be careful, ideally you should verify float is between INT_MIN and INT_MAX before casting it.

Oracle database object names maximum length is 30 bytes.

Object Name Rules: http://docs.oracle.com/database/121/SQLRF/sql_elements008.htm

If you want all the bars to get the same color (fill), you can easily add it inside geom_bar.

ggplot(data=df, aes(x=c1+c2/2, y=c3)) + 
geom_bar(stat="identity", width=c2, fill = "#FF6666")

Add fill = the_name_of_your_var inside aes to change the colors depending of the variable :

c4 = c("A", "B", "C")
df = cbind(df, c4)
ggplot(data=df, aes(x=c1+c2/2, y=c3, fill = c4)) + 
geom_bar(stat="identity", width=c2)

Use scale_fill_manual() if you want to manually the change of colors.

ggplot(data=df, aes(x=c1+c2/2, y=c3, fill = c4)) + 
geom_bar(stat="identity", width=c2) + 
scale_fill_manual("legend", values = c("A" = "black", "B" = "orange", "C" = "blue"))

In Mac OS Catalina default interactive shell is zsh. To change shell to zsh from bash:

chsh -s /bin/zsh

Then you need to enter your Mac password. Quit the terminal and reopen it. To check whether it's changed successfully to ssh, issue the following command.

echo $SHELL

If the result is /bin/zsh, your task is completed.

To change it back to bash, issue the following command on terminal.

chsh -s /bin/bash

Verify it again using echo $SHELL. Then result should be /bin/bash.

string replace() function perfectly solves this problem:

string.replace(s, old, new[, maxreplace])

Return a copy of string s with all occurrences of substring old replaced by new. If the optional argument maxreplace is given, the first maxreplace occurrences are replaced.

>>> u'longlongTESTstringTEST'.replace('TEST', '?', 1)
u'longlong?stringTEST'

Note as of Symfony 3.3 EntityManager is depreciated. Use EntityManagerInterface instead.

namespace AppBundle\Service;

use Doctrine\ORM\EntityManagerInterface;

class Someclass {
    protected $em;

    public function __construct(EntityManagerInterface $entityManager)
    {
        $this->em = $entityManager;
    }

    public function somefunction() {
        $em = $this->em;
        ...
    }
}

Your dictionary's value type could be a List, or other class that holds multiple objects. Something like

Dictionary<int, List<string>> 

for a Dictionary that is keyed by ints and holds a List of strings.

A main consideration in choosing the value type is what you'll be using the Dictionary for, if you'll have to do searching or other operations on the values, then maybe think about using a data structure that helps you do what you want -- like a HashSet.

Most of the above examples use code - and they are very very good. I need not add to what they say, but the following is a simple explanation that makes use of analogies rather than code/technical terms.

Simple Explanation - Explanation using analogies

Abstract Method

Think George W Bush. He says to his soldiers: "Go fight in Iraq". And that's it. All he has specified is that fighting must be done. He does not specify how exactly that will happen. But I mean, you can't just go out and "fight": what does that mean exactly? do I fight with a B-52 or my derringer? Those specific details are left to someone else. This is an abstract method.

Virtual Method

David Petraeus is high up in the army. He has defined what fight means:

1. Find the enemy
2. Neutralise him.
3. Have a beer afterwards

The problem is that it is a very general method. It's a good method that works, but sometimes is not specific enough. Good thing for Petraeus is that his orders have leeway and scope - he has allowed others to change his definition of "fight", according to their particular requirements.

Private Job Bloggs reads Petraeus' order and is given permission to implement his own version of fight, according to his particular requirements:

1. Find enemy.
2. Shoot him in the head.
3. Go Home
4. Have beer.

Nouri al Maliki also receives the same orders from Petraeus. He is to fight also. But he is a politician, not an infantry man. Obviously he cannot go around shooting his politican enemies in the head. Because Petraeus has given him a virtual method, then Maliki can implement his own version of the fight method, according to his particular circumstances:

1. Find enemy.
2. Have him arrested with some BS trumped up charges.
3. Go Home
4. Have beer.

IN other words, a virtual method provides boilerplate instructions - but these are general instructions, which can be made more specific by people down the army heirarchy, according to their particular circumstances.

The difference between the two

• George Bush does not prove any implementation details. This must be provided by someone else. This is an abstract method.

• Petraeus on the other hand does provide implementation details but he has given permission for his subordinates to override his orders with their own version, if they can come up with something better.

hope that helps.

This might Help You

  SpannableStringBuilder ssBuilder;

        ssBuilder = new SpannableStringBuilder(" ");
        // working code ImageSpan image = new ImageSpan(textView.getContext(), R.drawable.image);
        Drawable image = ContextCompat.getDrawable(textView.getContext(), R.drawable.image);
        float scale = textView.getContext().getResources().getDisplayMetrics().density;
        int width = (int) (12 * scale + 0.5f);
        int height = (int) (18 * scale + 0.5f);
        image.setBounds(0, 0, width, height);
        ImageSpan imageSpan = new ImageSpan(image, ImageSpan.ALIGN_BASELINE);
        ssBuilder.setSpan(
                imageSpan, // Span to add
                0, // Start of the span (inclusive)
                1, // End of the span (exclusive)
                Spanned.SPAN_INCLUSIVE_EXCLUSIVE);// Do not extend the span when text add later

        ssBuilder.append(" " + text);
        ssBuilder = new SpannableStringBuilder(text);
        textView.setText(ssBuilder);

Particular example: use a BindingResult object as an argument for a validate method of a Validator inside a Controller.

Then, you can check this object looking for validation errors:

validator.validate(modelObject, bindingResult);  
if (bindingResult.hasErrors()) {  
    // do something  
}

Just add the CSS rule (and the slightly improved mark-up) posted below and you should get the result that you're after.

CSS

.blank_row
{
    height: 10px !important; /* overwrites any other rules */
    background-color: #FFFFFF;
}

HTML

<tr class="blank_row">
    <td colspan="3"></td>
</tr>

Since I have no idea what your current stylesheet looks like I added the !important property just in case. If possible, though, you should remove it as one rarely wants to rely on !important declarations in a stylesheet considering the big possibility that they will mess it up later on.

You need to add

#container
{
    display:inline-block;
    position:relative;
    background:rgb(255,100,0);
    margin:0px;
    width:40%;
    height:100px;
    margin-right:-4px;
}

because whenever you write display:inline-block it takes an additional margin-right:4px. So, you need to remove it.

I have the same error while using BitBucket. What I did was remove https from the URL of my repo and set the URL using HTTP.

git remote set-url origin http://[email protected]/mj/pt.git

For those using Sass, I have written a mixin for this purpose:

@mixin addSeparator($element, $separator, $padding) {
    #{$element+'+'+$element}:before {
        content: $separator;
        padding: 0 $padding;
    }
}

Example:

@include addSeparator('li', '|', 1em);

Which will give you this:

li+li:before {
  content: "|";
  padding: 0 1em;
}

I did the same thing that @Diode, the first answer, but i made the condition with a range of dates, i hope this example going to be useful for someone

e.g (the same code to example with array of dates)

var dateFrom = "02/06/2013";_x000D_
var dateTo = "02/09/2013";_x000D_
_x000D_
var d1 = dateFrom.split("/");_x000D_
var d2 = dateTo.split("/");_x000D_
_x000D_
var from = new Date(d1[2], parseInt(d1[1])-1, d1[0]);  // -1 because months are from 0 to 11_x000D_
var to   = new Date(d2[2], parseInt(d2[1])-1, d2[0]); _x000D_
_x000D_
_x000D_
_x000D_
var dates= ["02/06/2013", "02/07/2013", "02/08/2013", "02/09/2013", "02/07/2013", "02/10/2013", "02/011/2013"];_x000D_
_x000D_
dates.forEach(element => {_x000D_
   let parts = element.split("/");_x000D_
   let date= new Date(parts[2], parseInt(parts[1]) - 1, parts[0]);_x000D_
        if (date >= from && date < to) {_x000D_
           console.log('dates in range', date);_x000D_
        }_x000D_
})

JPA (from Java EE 5) is an excellent example of the (over)use of annotations. Java EE 6 will also introduce annotations in lot of new areas, such as RESTful webservices and new annotations for under each the good old Servlet API.

Here are several resources:

• Sun - The Java Persistence API
• Java EE 5 tutorial - JPA
• Introducing the Java EE 6 platform (check all three pages).

It is not only the configuration specifics which are to / can be taken over by annotations, but they can also be used to control the behaviour. You see this good back in the Java EE 6's JAX-RS examples.

Django querysets are lazy. That means a query will hit the database only when you specifically ask for the result.

So until you print or actually use the result of a query you can filter further with no database access.

As you can see below your code only executes one sql query to fetch only the last 10 items.

In [19]: import logging                                 
In [20]: l = logging.getLogger('django.db.backends')    
In [21]: l.setLevel(logging.DEBUG)                      
In [22]: l.addHandler(logging.StreamHandler())      
In [23]: User.objects.all().order_by('-id')[:10]          
(0.000) SELECT "auth_user"."id", "auth_user"."username", "auth_user"."first_name", "auth_user"."last_name", "auth_user"."email", "auth_user"."password", "auth_user"."is_staff", "auth_user"."is_active", "auth_user"."is_superuser", "auth_user"."last_login", "auth_user"."date_joined" FROM "auth_user" ORDER BY "auth_user"."id" DESC LIMIT 10; args=()
Out[23]: [<User: hamdi>]

In my opinion:

1. Table names should be plural.
2. Column names should be singular.
3. No.
4. Either CamelCase (my preferred) or underscore_separated for both table names and column names.

However, like it has been mentioned, any convention is better than no convention. No matter how you choose to do it, document it so that future modifications follow the same conventions.

In PowerShell 3 and above I use the Copy-Item with New-Item.

copy-item -Path $file -Destination (new-item -type directory -force ("C:\Folder\sub\sub\" + $newSub)) -force -ea 0

I haven't tried it in ver 2.

This is super old, but I figured I'd add my 2c. DATE_FORMAT does indeed return a string, but I was looking for the CAST function, in the situation that I already had a datetime string in the database and needed to pattern match against it:

http://dev.mysql.com/doc/refman/5.0/en/cast-functions.html

In this case, you'd use:

CAST(date_value AS char)

This answers a slightly different question, but the question title seems ambiguous enough that this might help someone searching.

Just do-

Select (Getdate()+360) As MyDate

There is no need to use dateadd function for adding or subtracting days from a given date. For adding years, months, hours you need the dateadd function.

Like you I also faced many problems implementing OCR in Android, but after much Googling I found the solution, and it surely is the best example of OCR.

Let me explain using step-by-step guidance.

First, download the source code from https://github.com/rmtheis/tess-two.

Import all three projects. After importing you will get an error. To solve the error you have to create a res folder in the tess-two project

First, just create res folder in tess-two by tess-two->RightClick->new Folder->Name it "res"

After doing this in all three project the error should be gone.

Now download the source code from https://github.com/rmtheis/android-ocr, here you will get best example.

Now you just need to import it into your workspace, but first you have to download android-ndk from this site:

http://developer.android.com/tools/sdk/ndk/index.html i have windows 7 - 32 bit PC so I have download http://dl.google.com/android/ndk/android-ndk-r9-windows-x86.zip this file

Now extract it suppose I have extract it into E:\Software\android-ndk-r9 so I will set this path on Environment Variable

Right Click on MyComputer->Property->Advance-System-Settings->Advance->Environment Variable-> find PATH on second below Box and set like path like below picture

done it

Now open cmd and go to on D:\Android Workspace\tess-two like below

If you have successfully set up environment variable of NDK then just type ndk-build just like above picture than enter you will not get any kind of error and all file will be compiled successfully:

Now download other source code also from https://github.com/rmtheis/tess-two , and extract and import it and give it name OCRTest, like in my PC which is in D:\Android Workspace\OCRTest

Import test-two in this and run OCRTest and run it; you will get the best example of OCR.

iOS 4 blocks will save you :)

featuresArray = [[unsortedFeaturesArray sortedArrayUsingComparator: ^(id a, id b)  
{
    DMSeatFeature *first = ( DMSeatFeature* ) a;
    DMSeatFeature *second = ( DMSeatFeature* ) b;

    if ( first.quality == second.quality )
        return NSOrderedSame;
    else
    {
        if ( eSeatQualityGreen  == m_seatQuality || eSeatQualityYellowGreen == m_seatQuality || eSeatQualityDefault  == m_seatQuality )
        {
            if ( first.quality < second.quality )
                return NSOrderedAscending;
            else
                return NSOrderedDescending;
        }
        else // eSeatQualityRed || eSeatQualityYellow
        {
            if ( first.quality > second.quality )
                return NSOrderedAscending;
            else
                return NSOrderedDescending;
        } 
    }
}] retain];

http://sokol8.blogspot.com/2011/04/sorting-nsarray-with-blocks.html a bit of description

Another one way:

Interface:

-(NSString *) stringByStrippingHTML:(NSString*)inputString;

Implementation

(NSString *) stringByStrippingHTML:(NSString*)inputString
{ 
NSAttributedString *attrString = [[NSAttributedString alloc] initWithData:[inputString dataUsingEncoding:NSUTF8StringEncoding] options:@{NSDocumentTypeDocumentAttribute: NSHTMLTextDocumentType,NSCharacterEncodingDocumentAttribute: @(NSUTF8StringEncoding)} documentAttributes:nil error:nil];
NSString *str= [attrString string]; 

//you can add here replacements as your needs:
    [str stringByReplacingOccurrencesOfString:@"[" withString:@""];
    [str stringByReplacingOccurrencesOfString:@"]" withString:@""];
    [str stringByReplacingOccurrencesOfString:@"\n" withString:@""];

    return str;
}

Realization

cell.exampleClass.text = [self stringByStrippingHTML:[exampleJSONParsingArray valueForKey: @"key"]];

or simple

NSString *myClearStr = [self stringByStrippingHTML:rudeStr];

I had the same problem on Visual Studio Code. For various reasons several python versions are installed on my computer. I was thus able to easily solve the problem by switching python interpreter.

If like me you have several versions of python on you machine, in Visual Studio Code, you can easily change the interpreter by clicking on the bottom left corner where it says Python...

When you first open a web/app project, do a Ctrl-F5, which is the shortcut for starting the application without debugging. Then when you subsequently hit F5 and launch the debugger, it will use that instance of IE. Then stop and start the debugging in Visual Studio instead of closing IE.

It works on my machines. I'm using the built in dev web server. Don't know if that makes a difference.

Firefox will also stay open so you can debug in either or both at the same time.

I ended up storing the images in base64 format myself. I translate them from their base64 value when called back from firebase.

In my case, the problem occurred when writing in Kotlin and using IDEA 2020.3. Despite proper entries in build.gradle.kts. It turned out that the problem was when generating test functions by IDEA IDE (Alt + Insert). It generates the following code:

@Test
   internal fun name () {
     TODO ("Not yet implemented")
   }

And the problem will be fixed after removing the "internal" modifier:

@Test
   fun name () {
     TODO ("Not yet implemented")
   }

            <?xml version="1.0" encoding="UTF-8"?>

            <!--
            Licensed to the Apache Software Foundation (ASF) under one
            or more contributor license agreements.  See the NOTICE file
            distributed with this work for additional information
            regarding copyright ownership.  The ASF licenses this file
            to you under the Apache License, Version 2.0 (the
            "License"); you may not use this file except in compliance
            with the License.  You may obtain a copy of the License at
                http://www.apache.org/licenses/LICENSE-2.0
            Unless required by applicable law or agreed to in writing,
            software distributed under the License is distributed on an
            "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
            KIND, either express or implied.  See the License for the
            specific language governing permissions and limitations
            under the License.
            -->

            <!--
             | This is the configuration file for Maven. It can be specified at two levels:
             |
             |  1. User Level. This settings.xml file provides configuration for a single user,
             |                 and is normally provided in ${user.home}/.m2/settings.xml.
             |
             |                 NOTE: This location can be overridden with the CLI option:
             |
             |                 -s /path/to/user/settings.xml
             |
             |  2. Global Level. This settings.xml file provides configuration for all Maven
             |                 users on a machine (assuming they're all using the same Maven
             |                 installation). It's normally provided in
             |                 ${maven.conf}/settings.xml.
             |
             |                 NOTE: This location can be overridden with the CLI option:
             |
             |                 -gs /path/to/global/settings.xml
             |
             | The sections in this sample file are intended to give you a running start at
             | getting the most out of your Maven installation. Where appropriate, the default
             | values (values used when the setting is not specified) are provided.
             |
             |-->
            <settings xmlns="http://maven.apache.org/SETTINGS/1.0.0"
                      xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
                      xsi:schemaLocation="http://maven.apache.org/SETTINGS/1.0.0 http://maven.apache.org/xsd/settings-1.0.0.xsd">
              <!-- localRepository
               | The path to the local repository maven will use to store artifacts.
               |
               | Default: ${user.home}/.m2/repository
              <localRepository>/path/to/local/repo</localRepository>
              -->

              <!-- interactiveMode
               | This will determine whether maven prompts you when it needs input. If set to false,
               | maven will use a sensible default value, perhaps based on some other setting, for
               | the parameter in question.
               |
               | Default: true
              <interactiveMode>true</interactiveMode>
              -->

              <!-- offline
               | Determines whether maven should attempt to connect to the network when executing a build.
               | This will have an effect on artifact downloads, artifact deployment, and others.
               |
               | Default: false
              <offline>false</offline>
              -->

              <!-- pluginGroups
               | This is a list of additional group identifiers that will be searched when resolving plugins by their prefix, i.e.
               | when invoking a command line like "mvn prefix:goal". Maven will automatically add the group identifiers
               | "org.apache.maven.plugins" and "org.codehaus.mojo" if these are not already contained in the list.
               |-->
              <pluginGroups>
                <!-- pluginGroup
                 | Specifies a further group identifier to use for plugin lookup.
                <pluginGroup>com.your.plugins</pluginGroup>
                -->
              </pluginGroups>

              <!-- proxies
               | This is a list of proxies which can be used on this machine to connect to the network.
               | Unless otherwise specified (by system property or command-line switch), the first proxy
               | specification in this list marked as active will be used.
               |-->
              <proxies>
                <!-- proxy
                 | Specification for one proxy, to be used in connecting to the network.
                 |
                <proxy>
                  <id>optional</id>
                  <active>false</active>
                  <protocol>http</protocol>
                  <username>proxyuser</username>
                  <password>proxypass</password>
                  <host>proxy.host.net</host>
                  <port>80</port>
                  <nonProxyHosts>local.net|some.host.com</nonProxyHosts>
                </proxy>
                -->
              </proxies>

              <!-- servers
               | This is a list of authentication profiles, keyed by the server-id used within the system.
               | Authentication profiles can be used whenever maven must make a connection to a remote server.
               |-->
              <servers>
                <!-- server
                 | Specifies the authentication information to use when connecting to a particular server, identified by
                 | a unique name within the system (referred to by the 'id' attribute below).
                 |
                 | NOTE: You should either specify username/password OR privateKey/passphrase, since these pairings are
                 |       used together.
                 |
                <server>
                  <id>deploymentRepo</id>
                  <username>repouser</username>
                  <password>repopwd</password>
                </server>
                -->

                <!-- Another sample, using keys to authenticate.
                <server>
                  <id>siteServer</id>
                  <privateKey>/path/to/private/key</privateKey>
                  <passphrase>optional; leave empty if not used.</passphrase>
                </server>
                -->
              </servers>

              <!-- mirrors
               | This is a list of mirrors to be used in downloading artifacts from remote repositories.
               |
               | It works like this: a POM may declare a repository to use in resolving certain artifacts.
               | However, this repository may have problems with heavy traffic at times, so people have mirrored
               | it to several places.
               |
               | That repository definition will have a unique id, so we can create a mirror reference for that
               | repository, to be used as an alternate download site. The mirror site will be the preferred
               | server for that repository.
               |-->
              <mirrors>
                <!-- mirror
                 | Specifies a repository mirror site to use instead of a given repository. The repository that
                 | this mirror serves has an ID that matches the mirrorOf element of this mirror. IDs are used
                 | for inheritance and direct lookup purposes, and must be unique across the set of mirrors.
                 |
                <mirror>
                  <id>mirrorId</id>
                  <mirrorOf>repositoryId</mirrorOf>
                  <name>Human Readable Name for this Mirror.</name>
                  <url>http://my.repository.com/repo/path</url>
                </mirror>
                 -->
              </mirrors>

              <!-- profiles
               | This is a list of profiles which can be activated in a variety of ways, and which can modify
               | the build process. Profiles provided in the settings.xml are intended to provide local machine-
               | specific paths and repository locations which allow the build to work in the local environment.
               |
               | For example, if you have an integration testing plugin - like cactus - that needs to know where
               | your Tomcat instance is installed, you can provide a variable here such that the variable is
               | dereferenced during the build process to configure the cactus plugin.
               |
               | As noted above, profiles can be activated in a variety of ways. One way - the activeProfiles
               | section of this document (settings.xml) - will be discussed later. Another way essentially
               | relies on the detection of a system property, either matching a particular value for the property,
               | or merely testing its existence. Profiles can also be activated by JDK version prefix, where a
               | value of '1.4' might activate a profile when the build is executed on a JDK version of '1.4.2_07'.
               | Finally, the list of active profiles can be specified directly from the command line.
               |
               | NOTE: For profiles defined in the settings.xml, you are restricted to specifying only artifact
               |       repositories, plugin repositories, and free-form properties to be used as configuration
               |       variables for plugins in the POM.
               |
               |-->
              <profiles>

              <profile>
                <id>maven-https</id>
                <activation>
                    <activeByDefault>true</activeByDefault>
                </activation>
                <repositories>
                    <repository>
                        <id>central</id>
                        <url>https://repo1.maven.org/maven2</url>
                        <snapshots>
                            <enabled>false</enabled>
                        </snapshots>
                    </repository>
                </repositories>
                <pluginRepositories>
                    <pluginRepository>
                        <id>central</id>
                        <url>https://repo1.maven.org/maven2</url>
                        <snapshots>
                            <enabled>false</enabled>
                        </snapshots>
                    </pluginRepository>
                </pluginRepositories> 
            </profile>

                <!-- profile
                 | Specifies a set of introductions to the build process, to be activated using one or more of the
                 | mechanisms described above. For inheritance purposes, and to activate profiles via <activatedProfiles/>
                 | or the command line, profiles have to have an ID that is unique.
                 |
                 | An encouraged best practice for profile identification is to use a consistent naming convention
                 | for profiles, such as 'env-dev', 'env-test', 'env-production', 'user-jdcasey', 'user-brett', etc.
                 | This will make it more intuitive to understand what the set of introduced profiles is attempting
                 | to accomplish, particularly when you only have a list of profile id's for debug.
                 |
                 | This profile example uses the JDK version to trigger activation, and provides a JDK-specific repo.
                <profile>
                  <id>jdk-1.4</id>
                  <activation>
                    <jdk>1.4</jdk>
                  </activation>
                  <repositories>
                    <repository>
                      <id>jdk14</id>
                      <name>Repository for JDK 1.4 builds</name>
                      <url>http://www.myhost.com/maven/jdk14</url>
                      <layout>default</layout>
                      <snapshotPolicy>always</snapshotPolicy>
                    </repository>

                  </repositories>
                </profile>
                -->

                <!--
                 | Here is another profile, activated by the system property 'target-env' with a value of 'dev',
                 | which provides a specific path to the Tomcat instance. To use this, your plugin configuration
                 | might hypothetically look like:
                 |
                 | ...
                 | <plugin>
                 |   <groupId>org.myco.myplugins</groupId>
                 |   <artifactId>myplugin</artifactId>
                 |
                 |   <configuration>
                 |     <tomcatLocation>${tomcatPath}</tomcatLocation>
                 |   </configuration>
                 | </plugin>
                 | ...
                 |
                 | NOTE: If you just wanted to inject this configuration whenever someone set 'target-env' to
                 |       anything, you could just leave off the <value/> inside the activation-property.
                 |
                <profile>
                  <id>env-dev</id>
                  <activation>
                    <property>
                      <name>target-env</name>
                      <value>dev</value>
                    </property>
                  </activation>
                  <properties>
                    <tomcatPath>/path/to/tomcat/instance</tomcatPath>
                  </properties>
                </profile>
                -->
              </profiles>

              <!-- activeProfiles
               | List of profiles that are active for all builds.
               |
              <activeProfiles>
                <activeProfile>alwaysActiveProfile</activeProfile>
                <activeProfile>anotherAlwaysActiveProfile</activeProfile>
              </activeProfiles>
              -->
            </settings>

For memory usage, the following will work,

long total = Runtime.getRuntime().totalMemory();
long used  = Runtime.getRuntime().totalMemory() - Runtime.getRuntime().freeMemory();

For CPU usage, you'll need to use an external application to measure it.

You can also do something like that:

<error-page>
    <error-code>403</error-code>
    <location>/403.html</location>
</error-page>

<error-page>
    <location>/error.html</location>
</error-page>

For error code 403 it will return the page 403.html, and for any other error code it will return the page error.html.

If you'd rather use xpath and that span is the only span below your div, use my example below. I'd recommend using CSS (see sircapsalot's post).

String kk = wd.findElement(By.xpath(//*[@id='customSelect_3']//span)).getText();

css example:

String kk = wd.findElement(By.cssSelector("div[id='customSelect_3'] span[class='selectLabel clear']")).getText();

You can use or_where() for that - example from the CI docs:

$this->db->where('name !=', $name);

$this->db->or_where('id >', $id); 

// Produces: WHERE name != 'Joe' OR id > 50

Once you have copied the plugins and features folder to eclipse (eg. c:\program files\eclipse (or whereever you installed it). You will see a features and plugins folder there already) you can check if hibernate has installed by going to Help > Software updates > installed software. If hibernate is not listed close eclipse and launch it again via a command window with this command "eclipse -clean".

In case someone is still looking for this like I was, then there is a module we can use called "stack-trace". It is really popular. NPM Link

Then walk through the trace.

  var stackTrace = require('stack-trace');
  .
  .
  .
  var trace = stackTrace.get();
  trace.map(function (item){ 
    console.log(new Date().toUTCString() + ' : ' +  item.toString() );  
  });

Or just simply print the trace:

var stackTrace = require('stack-trace');
.
.
.
var trace = stackTrace.get();
trace.toString();

Lots of ways to do this. The most reliable is find.

Dim rLastCell As Range

Set rLastCell = ws.Cells.Find(What:="*", After:=ws.Cells(1, 1), LookIn:=xlFormulas, LookAt:= _
xlPart, SearchOrder:=xlByColumns, SearchDirection:=xlPrevious, MatchCase:=False)

MsgBox ("The last used column is: " & rLastCell.Column)

If you want to find the last column used in a particular row you can use:

Dim lColumn As Long

lColumn = ws.Cells(1, Columns.Count).End(xlToLeft).Column

Using used range (less reliable):

Dim lColumn As Long

lColumn = ws.UsedRange.Columns.Count

Using used range wont work if you have no data in column A. See here for another issue with used range:

See Here regarding resetting used range.

From the Python docs, set the PATH like you did as above.

You should arrange for Python’s installation directory to be added to the PATH of every command window as it starts. If you installed Python fairly recently then the command dir C:\py* will probably tell you where it is installed; the usual location is something like C:\Python27. Otherwise you will be reduced to a search of your whole disk

Use Tools ? Find or hit the Search button and look for “python.exe”. Supposing you discover that Python is installed in the C:\Python27 directory (the default at the time of writing), you should make sure that entering the command

Then execute the Python command using the full path name to make sure that works.

For Controllers, @SpringBootApplication(scanBasePackages = {"com.school.controllers"})

For Respositories, @EnableJpaRepositories(basePackages = {"com.school.repos"})

For Entities, @EntityScan(basePackages = {"com.school.models"})

This will slove

"Can't Autowire @Repository annotated interface"

problem as well as

Not an managed Type

problem. Sample configuration below

package com.school.boot;

import org.springframework.boot.SpringApplication;
import org.springframework.boot.autoconfigure.SpringBootApplication;
import org.springframework.boot.autoconfigure.domain.EntityScan;
import org.springframework.data.jpa.repository.config.EnableJpaRepositories;


@SpringBootApplication(scanBasePackages = {"com.school.controllers"})
@EnableJpaRepositories(basePackages = {"com.school.repos"})
@EntityScan(basePackages = {"com.school.models"})
public class SchoolApplication {

    public static void main(String[] args) {
        SpringApplication.run(SchoolApplication.class, args);
    }

}

NSString* NSStringWithoutSpace(NSString* string)
{
    return [string stringByReplacingOccurrencesOfString:@" " withString:@""];
}

What you are passing to GETNAME is the value of myInput, not the definition of myInput itself. The only way to do that is with a lambda expression, for example:

var nameofVar = GETNAME(() => myInput);

and indeed there are examples of that available. However! This reeks of doing something very wrong. I would propose you rethink why you need this. It is almost certainly not a good way of doing it, and forces various overheads (the capture class instance, and the expression tree). Also, it impacts the compiler: without this the compiler might actually have chosen to remove that variable completely (just using the stack without a formal local).

Perhaps you need a selected range in addition to cursor position. Here is a simple function, you don't even need jQuery:

function caretPosition(input) {
    var start = input[0].selectionStart,
        end = input[0].selectionEnd,
        diff = end - start;

    if (start >= 0 && start == end) {
        // do cursor position actions, example:
        console.log('Cursor Position: ' + start);
    } else if (start >= 0) {
        // do ranged select actions, example:
        console.log('Cursor Position: ' + start + ' to ' + end + ' (' + diff + ' selected chars)');
    }
}

Let's say you wanna call it on an input whenever it changes or mouse moves cursor position (in this case we are using jQuery .on()). For performance reasons, it may be a good idea to add setTimeout() or something like Underscores _debounce() if events are pouring in:

$('input[type="text"]').on('keyup mouseup mouseleave', function() {
    caretPosition($(this));
});

Here is a fiddle if you wanna try it out: https://jsfiddle.net/Dhaupin/91189tq7/

With HTML5 you can use button[formaction]:

<form action="Edit">
  <button type="submit">Submit</button> <!-- Will post to default action "Edit" -->
  <button type="submit" formaction="Validate">Validate</button> <!-- Will override default action and post to "Validate -->
</form>

I believe you are misinterpreting the JSON format for key values. You should store your string as

NSString *jsonString = @"{\"ID\":{\"Content\":268,\"type\":\"text\"},\"ContractTemplateID\":{\"Content\":65,\"type\":\"text\"}}";
NSData *data = [jsonString dataUsingEncoding:NSUTF8StringEncoding];
id json = [NSJSONSerialization JSONObjectWithData:data options:0 error:nil];

Now if you do following NSLog statement

NSLog(@"%@",[json objectForKey:@"ID"]);

Result would be another NSDictionary.

{
    Content = 268;
    type = text;
}

Hope this helps to get clear understanding.

I had a similar problem and google was sending me to this post. My solution was a bit different and less compact, but hopefully this can be useful to someone.

Showing your image with matplotlib.pyplot.imshow is generally a fast way to display 2D data. However this by default labels the axes with the pixel count. If the 2D data you are plotting corresponds to some uniform grid defined by arrays x and y, then you can use matplotlib.pyplot.xticks and matplotlib.pyplot.yticks to label the x and y axes using the values in those arrays. These will associate some labels, corresponding to the actual grid data, to the pixel counts on the axes. And doing this is much faster than using something like pcolor for example.

Here is an attempt at this with your data:

import matplotlib.pyplot as plt

# ... define 2D array hist as you did

plt.imshow(hist, cmap='Reds')
x = np.arange(80,122,2) # the grid to which your data corresponds
nx = x.shape[0]
no_labels = 7 # how many labels to see on axis x
step_x = int(nx / (no_labels - 1)) # step between consecutive labels
x_positions = np.arange(0,nx,step_x) # pixel count at label position
x_labels = x[::step_x] # labels you want to see
plt.xticks(x_positions, x_labels)
# in principle you can do the same for y, but it is not necessary in your case

First of all, the easiest way to run things at startup is to add them to the file /etc/rc.local.

Another simple way is to use @reboot in your crontab. Read the cron manpage for details.

However, if you want to do things properly, in addition to adding a script to /etc/init.d you need to tell ubuntu when the script should be run and with what parameters. This is done with the command update-rc.d which creates a symlink from some of the /etc/rc* directories to your script. So, you'd need to do something like:

update-rc.d yourscriptname start 2

However, real init scripts should be able to handle a variety of command line options and otherwise integrate to the startup process. The file /etc/init.d/README has some details and further pointers.

Just in case you are not sure the string starts with a word...

$input = ' Test me more ';
echo preg_replace('/(\s*)([^\s]*)(.*)/', '$2', $input); //Test

There are a few ways. One of the simplest is to create a my-paths.pth file (as described here). This is just a file with the extension .pth that you put into your system site-packages directory. On each line of the file you put one directory name, so you can put a line in there with /path/to/the/ and it will add that directory to the path.

You could also use the PYTHONPATH environment variable, which is like the system PATH variable but contains directories that will be added to sys.path. See the documentation.

Note that no matter what you do, sys.path contains directories not files. You can't "add a file to sys.path". You always add its directory and then you can import the file.

View randview = new View(getBaseContext());
randview = (View)findViewById(R.id.container);
randview.setBackgroundColor(Color.BLUE);

worked for me. thank you.

Update: I now consider this answer to be obsolete. I posted a new perfect solution further down.

If your makefile may be running on non-Cygwin Windows, uname may not be available. That's awkward, but this is a potential solution. You have to check for Cygwin first to rule it out, because it has WINDOWS in its PATH environment variable too.

ifneq (,$(findstring /cygdrive/,$(PATH)))
    UNAME := Cygwin
else
ifneq (,$(findstring WINDOWS,$(PATH)))
    UNAME := Windows
else
    UNAME := $(shell uname -s)
endif
endif

C++11

Problem

While the rules in C++03 about when you need typename and template are largely reasonable, there is one annoying disadvantage of its formulation

template<typename T>
struct A {
  typedef int result_type;

  void f() {
    // error, "this" is dependent, "template" keyword needed
    this->g<float>();

    // OK
    g<float>();

    // error, "A<T>" is dependent, "typename" keyword needed
    A<T>::result_type n1;

    // OK
    result_type n2; 
  }

  template<typename U>
  void g();
};

As can be seen, we need the disambiguation keyword even if the compiler could perfectly figure out itself that A::result_type can only be int (and is hence a type), and this->g can only be the member template g declared later (even if A is explicitly specialized somewhere, that would not affect the code within that template, so its meaning cannot be affected by a later specialization of A!).

Current instantiation

To improve the situation, in C++11 the language tracks when a type refers to the enclosing template. To know that, the type must have been formed by using a certain form of name, which is its own name (in the above, A, A<T>, ::A<T>). A type referenced by such a name is known to be the current instantiation. There may be multiple types that are all the current instantiation if the type from which the name is formed is a member/nested class (then, A::NestedClass and A are both current instantiations).

Based on this notion, the language says that CurrentInstantiation::Foo, Foo and CurrentInstantiationTyped->Foo (such as A *a = this; a->Foo) are all member of the current instantiation if they are found to be members of a class that is the current instantiation or one of its non-dependent base classes (by just doing the name lookup immediately).

The keywords typename and template are now not required anymore if the qualifier is a member of the current instantiation. A keypoint here to remember is that A<T> is still a type-dependent name (after all T is also type dependent). But A<T>::result_type is known to be a type - the compiler will "magically" look into this kind of dependent types to figure this out.

struct B {
  typedef int result_type;
};

template<typename T>
struct C { }; // could be specialized!

template<typename T>
struct D : B, C<T> {
  void f() {
    // OK, member of current instantiation!
    // A::result_type is not dependent: int
    D::result_type r1;

    // error, not a member of the current instantiation
    D::questionable_type r2;

    // OK for now - relying on C<T> to provide it
    // But not a member of the current instantiation
    typename D::questionable_type r3;        
  }
};

That's impressive, but can we do better? The language even goes further and requires that an implementation again looks up D::result_type when instantiating D::f (even if it found its meaning already at definition time). When now the lookup result differs or results in ambiguity, the program is ill-formed and a diagnostic must be given. Imagine what happens if we defined C like this

template<>
struct C<int> {
  typedef bool result_type;
  typedef int questionable_type;
};

A compiler is required to catch the error when instantiating D<int>::f. So you get the best of the two worlds: "Delayed" lookup protecting you if you could get in trouble with dependent base classes, and also "Immediate" lookup that frees you from typename and template.

Unknown specializations

In the code of D, the name typename D::questionable_type is not a member of the current instantiation. Instead the language marks it as a member of an unknown specialization. In particular, this is always the case when you are doing DependentTypeName::Foo or DependentTypedName->Foo and either the dependent type is not the current instantiation (in which case the compiler can give up and say "we will look later what Foo is) or it is the current instantiation and the name was not found in it or its non-dependent base classes and there are also dependent base classes.

Imagine what happens if we had a member function h within the above defined A class template

void h() {
  typename A<T>::questionable_type x;
}

In C++03, the language allowed to catch this error because there could never be a valid way to instantiate A<T>::h (whatever argument you give to T). In C++11, the language now has a further check to give more reason for compilers to implement this rule. Since A has no dependent base classes, and A declares no member questionable_type, the name A<T>::questionable_type is neither a member of the current instantiation nor a member of an unknown specialization. In that case, there should be no way that that code could validly compile at instantiation time, so the language forbids a name where the qualifier is the current instantiation to be neither a member of an unknown specialization nor a member of the current instantiation (however, this violation is still not required to be diagnosed).

Examples and trivia

You can try this knowledge on this answer and see whether the above definitions make sense for you on a real-world example (they are repeated slightly less detailed in that answer).

The C++11 rules make the following valid C++03 code ill-formed (which was not intended by the C++ committee, but will probably not be fixed)

struct B { void f(); };
struct A : virtual B { void f(); };

template<typename T>
struct C : virtual B, T {
  void g() { this->f(); }
};

int main() { 
  C<A> c; c.g(); 
}

This valid C++03 code would bind this->f to A::f at instantiation time and everything is fine. C++11 however immediately binds it to B::f and requires a double-check when instantiating, checking whether the lookup still matches. However when instantiating C<A>::g, the Dominance Rule applies and lookup will find A::f instead.

string = string.replace(/[&\/\\#,+()$~%.'":*?<>{}]/g,'_');

Alternatively, to change all characters except numbers and letters, try:

string = string.replace(/[^a-zA-Z0-9]/g,'_');

There is a fix for Flask issue #570 introduced recenty (flask 0.10) that causes this exception to be raised.

See https://github.com/mitsuhiko/flask/issues/796

So if you go to flask/app.py and comment out the 4 lines 948..951, this may help until the issue is resovled fully in a new version.

The diff of that change is here: http://github.com/mitsuhiko/flask/commit/661ee54bc2bc1ea0763ac9c226f8e14bb0beb5b1

VARCHAR means that it's a variable-length character, so it's only going to take as much space as is necessary. But if you knew something about the underlying structure, it may make sense to restrict VARCHAR to some maximum amount.

For instance, if you were storing comments from the user, you may limit the comment field to only 4000 characters; if so, it doesn't really make any sense to make the sql table have a field that's larger than VARCHAR(4000).

http://dev.mysql.com/doc/refman/5.0/en/char.html

I found the answer: I need to add a new application to the service components in my computer and then add the right DLL's.

Thanks! If anyone has the same problem, I'll be happy to help.

Installing GD :

For CentOS / RedHat / Fedora :

sudo yum install php-gd

For Debian/ubuntu :

sudo apt-get install php5-gd

Installing freetype :

For CentOS / RedHat / Fedora :

sudo yum install freetype*

For Debian/ubuntu :

sudo apt-get install freetype*

Don't forget to restart apache after that (if you are using apache):

CentOS / RedHat / Fedora :

sudo /etc/init.d/httpd restart

Or

sudo service httpd restart

Debian/ubuntu :

sudo /etc/init.d/apache2 restart

Or

sudo service apache2 restart

It's not doable with CSS2.1, but it is possible with CSS3 attribute substring-matching selectors (which are supported in IE7+):

div[class^="status-"], div[class*=" status-"]

Notice the space character in the second attribute selector. This picks up div elements whose class attribute meets either of these conditions:

• [class^="status-"] — starts with "status-"

• [class*=" status-"] — contains the substring "status-" occurring directly after a space character. Class names are separated by whitespace per the HTML spec, hence the significant space character. This checks any other classes after the first if multiple classes are specified, and adds a bonus of checking the first class in case the attribute value is space-padded (which can happen with some applications that output class attributes dynamically).

Naturally, this also works in jQuery, as demonstrated here.

The reason you need to combine two attribute selectors as described above is because an attribute selector such as [class*="status-"] will match the following element, which may be undesirable:

<div id='D' class='foo-class foo-status-bar bar-class'></div>

If you can ensure that such a scenario will never happen, then you are free to use such a selector for the sake of simplicity. However, the combination above is much more robust.

If you have control over the HTML source or the application generating the markup, it may be simpler to just make the status- prefix its own status class instead as Gumbo suggests.

I've finally solved this problem. It was driving me nuts. From a PC, go to Google Play. In my case I had conflicting email accounts and had to create a new email account. Then go to your phone settings. Go to accounts and then Google. Remove your existing email there and add the new one.

The phone will then synchronise and then everything works again. You can then update and download apps; which is what I couldn't do before because of this problem.

I have a .bat file on my quick task bar (windows) with:

taskkill /F /IM java.exe

It's very quick, but it may not be good in many situations!

if (StartDate1 > StartDate2) swap(StartDate, EndDate);

(StartDate1 <= EndDate2) and (StartDate2 <= EndDate1);

import pandas as pd
pd.set_option('display.max_columns', 100)
pd.set_option('display.width', 1000)

SentenceA = "William likes Piano and Piano likes William"
SentenceB = "Sara likes Guitar"
SentenceC = "Mamoosh likes Piano"
SentenceD = "William is a CS Student"
SentenceE = "Sara is kind"
SentenceF = "Mamoosh is kind"


bowA = SentenceA.split(" ")
bowB = SentenceB.split(" ")
bowC = SentenceC.split(" ")
bowD = SentenceD.split(" ")
bowE = SentenceE.split(" ")
bowF = SentenceF.split(" ")

# Creating a set consisted of all words

wordSet = set(bowA).union(set(bowB)).union(set(bowC)).union(set(bowD)).union(set(bowE)).union(set(bowF))
print("Set of all words is: ", wordSet)

# Initiating dictionary with 0 value for all BOWs

wordDictA = dict.fromkeys(wordSet, 0)
wordDictB = dict.fromkeys(wordSet, 0)
wordDictC = dict.fromkeys(wordSet, 0)
wordDictD = dict.fromkeys(wordSet, 0)
wordDictE = dict.fromkeys(wordSet, 0)
wordDictF = dict.fromkeys(wordSet, 0)

for word in bowA:
    wordDictA[word] += 1
for word in bowB:
    wordDictB[word] += 1
for word in bowC:
    wordDictC[word] += 1
for word in bowD:
    wordDictD[word] += 1
for word in bowE:
    wordDictE[word] += 1
for word in bowF:
    wordDictF[word] += 1

# Printing Term frequency

print("SentenceA TF: ", wordDictA)
print("SentenceB TF: ", wordDictB)
print("SentenceC TF: ", wordDictC)
print("SentenceD TF: ", wordDictD)
print("SentenceE TF: ", wordDictE)
print("SentenceF TF: ", wordDictF)

print(pd.DataFrame([wordDictA, wordDictB, wordDictB, wordDictC, wordDictD, wordDictE, wordDictF]))

OutPut:

   CS  Guitar  Mamoosh  Piano  Sara  Student  William  a  and  is  kind  likes
0   0       0        0      2     0        0        2  0    1   0     0      2
1   0       1        0      0     1        0        0  0    0   0     0      1
2   0       1        0      0     1        0        0  0    0   0     0      1
3   0       0        1      1     0        0        0  0    0   0     0      1
4   1       0        0      0     0        1        1  1    0   1     0      0
5   0       0        0      0     1        0        0  0    0   1     1      0
6   0       0        1      0     0        0        0  0    0   1     1      0

Following up on ios-lizard's idea:

I found out that the controls on the video are about 35 pixels. This is what I did:

$(this).on("click", function(event) {
    console.log("clicked");
    var offset = $(this).offset();
    var height = $(this).height();
    var y = (event.pageY - offset.top - height) * -1;
    if (y > 35) {
        this.paused ? this.play() : this.pause();
    }
});

Basically, it finds the position of the click relative to the element. I multiplied it by -1 to make it positive. If the value was greater than 35 (the height of the controls) that means that the user click somewhere else than the controls Therefore we pause or play the video.

$_ is an variable which iterates over each object/element passed from the previous | (pipe).

check pg_hba.conf

In case the authentication method is 'peer', the client's operating system user name/password must match the database user name and password. In that case, set the password for Linux user 'postgres' and the DB user 'postgres' to be the same.

see the documentation for details: https://www.postgresql.org/docs/9.1/auth-pg-hba-conf.html