This doesn't work for me, I want to to like jquery slideUp / slideDown function, I tried this code, but it only move the content wich stay at the same place after animation end, the view should have a 0dp height at start of slideDown and the view height (with wrap_content) after the end of the animation.

Question C: How do you detect whether or not two line segments intersect?

I have searched for the same topic, and I wasn't happy with the answers. So I have written an article that explains very detailed how to check if two line segments intersect with a lot of images. There is complete (and tested) Java-code.

Here is the article, cropped to the most important parts:

The algorithm, that checks if line segment a intersects with line segment b, looks like this:

What are bounding boxes? Here are two bounding boxes of two line segments:

If both bounding boxes have an intersection, you move line segment a so that one point is at (0|0). Now you have a line through the origin defined by a. Now move line segment b the same way and check if the new points of line segment b are on different sides of line a. If this is the case, check it the other way around. If this is also the case, the line segments intersect. If not, they don't intersect.

Question A: Where do two line segments intersect?

You know that two line segments a and b intersect. If you don't know that, check it with the tools I gave you in "Question C".

Now you can go through some cases and get the solution with 7th grade math (see code and interactive example).

Question B: How do you detect whether or not two lines intersect?

Let's say your point A = (x1, y1), point B = (x2, y2), C = (x_3, y_3), D = (x_4, y_4). Your first line is defined by AB (with A != B), and your second one by CD (with C != D).

function doLinesIntersect(AB, CD) {
    if (x1 == x2) {
        return !(x3 == x4 && x1 != x3);
    } else if (x3 == x4) {
        return true;
    } else {
        // Both lines are not parallel to the y-axis
        m1 = (y1-y2)/(x1-x2);
        m2 = (y3-y4)/(x3-x4);
        return m1 != m2;
    }
}

Question D: Where do two lines intersect?

Check with Question B if they intersect at all.

The lines a and b are defined by two points for each line. You can basically apply the same logic was used in Question A.

I have found that the following syntax works well for me.

find /usr/pcapps/ -mount -type f -size +1000000c | perl -lpe ' s{ }{\\ }g ' | xargs ls -l | sort +4nr | head -200

In this example, I am looking for the largest 200 files over 1,000,000 bytes in the filesystem mounted at "/usr/pcapps".

The Perl line-liner between "find" and "xargs" escapes/quotes each blank so "xargs" passes any filename with embedded blanks to "ls" as a single argument.

[a-zA-Z]{2}\d{6}

[a-zA-Z]{2} means two letters \d{6} means 6 digits

If you want only uppercase letters, then:

[A-Z]{2}\d{6}

Short and easy version:

1. First create this abstract class

public abstract class HorizontalSwipeListener implements View.OnTouchListener {

    private float firstX;
    private int minDistance;

    HorizontalSwipeListener(int minDistance) {
        this.minDistance = minDistance;
    }

    abstract void onSwipeRight();

    abstract void onSwipeLeft();

    @Override
    public boolean onTouch(View view, MotionEvent event) {

        switch (event.getAction()) {
            case MotionEvent.ACTION_DOWN:
                firstX = event.getX();
                return true;
            case MotionEvent.ACTION_UP:
                float secondX = event.getX();
                if (Math.abs(secondX - firstX) > minDistance) {
                    if (secondX > firstX) {
                        onSwipeLeft();
                    } else {
                        onSwipeRight();
                    }
                }
                return true;
        }
        return view.performClick();
    }

}

2.Then create a concrete class implementing what you need:

public class SwipeListener extends HorizontalSwipeListener {

    public SwipeListener() {
        super(200);
    }

    @Override
    void onSwipeRight() {
        System.out.println("right");
    }

    @Override
    void onSwipeLeft() {
        System.out.println("left");
    }

}

Here you go:

$( table ).delegate( '.tr_clone_add', 'click', function () {
    var thisRow = $( this ).closest( 'tr' )[0];
    $( thisRow ).clone().insertAfter( thisRow ).find( 'input:text' ).val( '' );
});

Live demo: http://jsfiddle.net/RhjxK/4/

Update: The new way of delegating events in jQuery is

$(table).on('click', '.tr_clone_add', function () { … });

I used two methods and I found one method useful over other. Here is my answer:

My input data:

crkmod_mpp = ['M13','M18','M19','M24']
testmod_mpp = ['M13','M14','M15','M16','M17','M18','M19','M20','M21','M22','M23','M24']

Method1: np.setdiff1d I like this approach over other because it preserves the position

test= list(np.setdiff1d(testmod_mpp,crkmod_mpp))
print(test)
['M15', 'M16', 'M22', 'M23', 'M20', 'M14', 'M17', 'M21']

Method2: Though it gives same answer as in Method1 but disturbs the order

test = list(set(testmod_mpp).difference(set(crkmod_mpp)))
print(test)
['POA23', 'POA15', 'POA17', 'POA16', 'POA22', 'POA18', 'POA24', 'POA21']

Method1 np.setdiff1d meets my requirements perfectly. This answer for information.

Download Microsoft Rdlc Report Designer for Visual Studio from this link. https://marketplace.visualstudio.com/items?itemName=ProBITools.MicrosoftRdlcReportDesignerforVisualStudio-18001

Microsoft explain the steps in details:

https://docs.microsoft.com/en-us/sql/reporting-services/application-integration/integrating-reporting-services-using-reportviewer-controls-get-started?view=sql-server-2017

The following steps summarizes the above article.

Adding the Report Viewer control to a new web project:

1. Create a new ASP.NET Empty Web Site or open an existing ASP.NET project.

2. Install the Report Viewer control NuGet package via the NuGet package manager console. From Visual Studio -> Tools -> NuGet Package Manager -> Package Manager Console

   Install-Package Microsoft.ReportingServices.ReportViewerControl.WebForms
   

3. Add a new .aspx page to the project and register the Report Viewer control assembly for use within the page.

   <%@ Register assembly="Microsoft.ReportViewer.WebForms, Version=15.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91" namespace="Microsoft.Reporting.WebForms" tagprefix="rsweb" %>
   

4. Add a ScriptManagerControl to the page.

5. Add the Report Viewer control to the page. The snippet below can be updated to reference a report hosted on a remote report server.

    <rsweb:ReportViewer ID="ReportViewer1" runat="server" ProcessingMode="Remote">
    <ServerReport ReportPath="" ReportServerUrl="" /></rsweb:ReportViewer>
   

The final page should look like the following.

<%@ Page Language="C#" AutoEventWireup="true" CodeBehind="WebForm1.aspx.cs" Inherits="Sample" %>

<%@ Register assembly="Microsoft.ReportViewer.WebForms, Version=15.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91" namespace="Microsoft.Reporting.WebForms" tagprefix="rsweb" %>

<!DOCTYPE html>

<html xmlns="https://www.w3.org/1999/xhtml">
<head runat="server">
    <meta http-equiv="X-UA-Compatible" content="IE=edge" /> 
    <title></title>
</head>
<body>
    <form id="form1" runat="server">
    <asp:ScriptManager runat="server"></asp:ScriptManager>        
       <rsweb:ReportViewer ID="ReportViewer1" runat="server" ProcessingMode="Remote">
           <ServerReport ReportServerUrl="https://AContosoDepartment/ReportServer" ReportPath="/LatestSales" />
    </rsweb:ReportViewer>
    </form>
</body>

Using np.ix_ is the most convenient way to do it (as answered by others), but here is another interesting way to do it:

>>> rows = [0, 1, 3]
>>> cols = [0, 2]

>>> a[rows].T[cols].T

array([[ 0,  2],
       [ 4,  6],
       [12, 14]])

PHPMailer uses Exceptions. Try to adopt the following code:

require_once '../class.phpmailer.php';

$mail = new PHPMailer(true); //defaults to using php "mail()"; the true param means it will throw exceptions on errors, which we need to catch

try {
  $mail->AddReplyTo('[email protected]', 'First Last');
  $mail->AddAddress('[email protected]', 'John Doe');
  $mail->SetFrom('[email protected]', 'First Last');
  $mail->AddReplyTo('[email protected]', 'First Last');
  $mail->Subject = 'PHPMailer Test Subject via mail(), advanced';
  $mail->AltBody = 'To view the message, please use an HTML compatible email viewer!'; // optional - MsgHTML will create an alternate automatically
  $mail->MsgHTML(file_get_contents('contents.html'));
  $mail->AddAttachment('images/phpmailer.gif');      // attachment
  $mail->AddAttachment('images/phpmailer_mini.gif'); // attachment
  $mail->Send();
  echo "Message Sent OK\n";
} catch (phpmailerException $e) {
  echo $e->errorMessage(); //Pretty error messages from PHPMailer
} catch (Exception $e) {
  echo $e->getMessage(); //Boring error messages from anything else!
}

The org.eclipse.m2e:lifecycle-mapping plugin doesn't exist actually. It should be used from the <build><pluginManagement> section of your pom.xml. That way, it's not resolved by Maven but can be read by m2e.

But a more practical solution to your problem would be to install the m2e build-helper connector in eclipse. You can install it from the Window > Preferences > Maven > Discovery > Open Catalog. That way build-helper-maven-plugin:add-sources would be called in eclipse without having you to change your pom.xml.

Using the Select Tag helpers to render a SELECT element

In your GET action, create an object of your view model, load the EmployeeList collection property and send that to the view.

public IActionResult Create()
{
    var vm = new MyViewModel();
    vm.EmployeesList = new List<Employee>
    {
        new Employee { Id = 1, FullName = "Shyju" },
        new Employee { Id = 2, FullName = "Bryan" }
    };
    return View(vm);
}

And in your create view, create a new SelectList object from the EmployeeList property and pass that as value for the asp-items property.

@model MyViewModel
<form asp-controller="Home" asp-action="Create">

    <select asp-for="EmployeeId" 
            asp-items="@(new SelectList(Model.EmployeesList,"Id","FullName"))">
        <option>Please select one</option>
    </select>

    <input type="submit"/>

</form>

And your HttpPost action method to accept the submitted form data.

[HttpPost]
public IActionResult Create(MyViewModel model)
{
   //  check model.EmployeeId 
   //  to do : Save and redirect
}

Or

If your view model has a List<SelectListItem> as the property for your dropdown items.

public class MyViewModel
{
    public int EmployeeId { get; set; }
    public string Comments { get; set; }
    public List<SelectListItem> Employees { set; get; }
}

And in your get action,

public IActionResult Create()
{
    var vm = new MyViewModel();
    vm.Employees = new List<SelectListItem>
    {
        new SelectListItem {Text = "Shyju", Value = "1"},
        new SelectListItem {Text = "Sean", Value = "2"}
    };
    return View(vm);
}

And in the view, you can directly use the Employees property for the asp-items.

@model MyViewModel
<form asp-controller="Home" asp-action="Create">

    <label>Comments</label>
    <input type="text" asp-for="Comments"/>

    <label>Lucky Employee</label>
    <select asp-for="EmployeeId" asp-items="@Model.Employees" >
        <option>Please select one</option>
    </select>

    <input type="submit"/>

</form>

The class SelectListItem belongs to Microsoft.AspNet.Mvc.Rendering namespace.

Make sure you are using an explicit closing tag for the select element. If you use the self closing tag approach, the tag helper will render an empty SELECT element!

The below approach will not work

<select asp-for="EmployeeId" asp-items="@Model.Employees" />

But this will work.

<select asp-for="EmployeeId" asp-items="@Model.Employees"></select>

Getting data from your database table using entity framework

The above examples are using hard coded items for the options. So i thought i will add some sample code to get data using Entity framework as a lot of people use that.

Let's assume your DbContext object has a property called Employees, which is of type DbSet<Employee> where the Employee entity class has an Id and Name property like this

public class Employee
{
   public int Id { set; get; }
   public string Name { set; get; }
}

You can use a LINQ query to get the employees and use the Select method in your LINQ expression to create a list of SelectListItem objects for each employee.

public IActionResult Create()
{
    var vm = new MyViewModel();
    vm.Employees = context.Employees
                          .Select(a => new SelectListItem() {  
                              Value = a.Id.ToString(),
                              Text = a.Name
                          })
                          .ToList();
    return View(vm);
}

Assuming context is your db context object. The view code is same as above.

Using SelectList

Some people prefer to use SelectList class to hold the items needed to render the options.

public class MyViewModel
{
    public int EmployeeId { get; set; }
    public SelectList Employees { set; get; }
}

Now in your GET action, you can use the SelectList constructor to populate the Employees property of the view model. Make sure you are specifying the dataValueField and dataTextField parameters.

public IActionResult Create()
{
    var vm = new MyViewModel();
    vm.Employees = new SelectList(GetEmployees(),"Id","FirstName");
    return View(vm);
}
public IEnumerable<Employee> GetEmployees()
{
    // hard coded list for demo. 
    // You may replace with real data from database to create Employee objects
    return new List<Employee>
    {
        new Employee { Id = 1, FirstName = "Shyju" },
        new Employee { Id = 2, FirstName = "Bryan" }
    };
}

Here I am calling the GetEmployees method to get a list of Employee objects, each with an Id and FirstName property and I use those properties as DataValueField and DataTextField of the SelectList object we created. You can change the hardcoded list to a code which reads data from a database table.

The view code will be same.

<select asp-for="EmployeeId" asp-items="@Model.Employees" >
    <option>Please select one</option>
</select>

Render a SELECT element from a list of strings.

Sometimes you might want to render a select element from a list of strings. In that case, you can use the SelectList constructor which only takes IEnumerable<T>

var vm = new MyViewModel();
var items = new List<string> {"Monday", "Tuesday", "Wednesday"};
vm.Employees = new SelectList(items);
return View(vm);

The view code will be same.

Setting selected options

Some times,you might want to set one option as the default option in the SELECT element (For example, in an edit screen, you want to load the previously saved option value). To do that, you may simply set the EmployeeId property value to the value of the option you want to be selected.

public IActionResult Create()
{
    var vm = new MyViewModel();
    vm.Employees = new List<SelectListItem>
    {
        new SelectListItem {Text = "Shyju", Value = "11"},
        new SelectListItem {Text = "Tom", Value = "12"},
        new SelectListItem {Text = "Jerry", Value = "13"}
    };
    vm.EmployeeId = 12;  // Here you set the value
    return View(vm);
}

This will select the option Tom in the select element when the page is rendered.

Multi select dropdown

If you want to render a multi select dropdown, you can simply change your view model property which you use for asp-for attribute in your view to an array type.

public class MyViewModel
{
    public int[] EmployeeIds { get; set; }
    public List<SelectListItem> Employees { set; get; }
}

This will render the HTML markup for the select element with the multiple attribute which will allow the user to select multiple options.

@model MyViewModel
<select id="EmployeeIds" multiple="multiple" name="EmployeeIds">
    <option>Please select one</option>
    <option value="1">Shyju</option>
    <option value="2">Sean</option>
</select>

Setting selected options in multi select

Similar to single select, set the EmployeeIds property value to the an array of values you want.

public IActionResult Create()
{
    var vm = new MyViewModel();
    vm.Employees = new List<SelectListItem>
    {
        new SelectListItem {Text = "Shyju", Value = "11"},
        new SelectListItem {Text = "Tom", Value = "12"},
        new SelectListItem {Text = "Jerry", Value = "13"}
    };
    vm.EmployeeIds= new int[] { 12,13} ;  
    return View(vm);
}

This will select the option Tom and Jerry in the multi select element when the page is rendered.

Using ViewBag to transfer the list of items

If you do not prefer to keep a collection type property to pass the list of options to the view, you can use the dynamic ViewBag to do so.(This is not my personally recommended approach as viewbag is dynamic and your code is prone to uncatched typo errors)

public IActionResult Create()
{       
    ViewBag.Employees = new List<SelectListItem>
    {
        new SelectListItem {Text = "Shyju", Value = "1"},
        new SelectListItem {Text = "Sean", Value = "2"}
    };
    return View(new MyViewModel());
}

and in the view

<select asp-for="EmployeeId" asp-items="@ViewBag.Employees">
    <option>Please select one</option>
</select>

Using ViewBag to transfer the list of items and setting selected option

It is same as above. All you have to do is, set the property (for which you are binding the dropdown for) value to the value of the option you want to be selected.

public IActionResult Create()
{       
    ViewBag.Employees = new List<SelectListItem>
    {
        new SelectListItem {Text = "Shyju", Value = "1"},
        new SelectListItem {Text = "Bryan", Value = "2"},
        new SelectListItem {Text = "Sean", Value = "3"}
    };

    vm.EmployeeId = 2;  // This will set Bryan as selected

    return View(new MyViewModel());
}

and in the view

<select asp-for="EmployeeId" asp-items="@ViewBag.Employees">
    <option>Please select one</option>
</select>

Grouping items

The select tag helper method supports grouping options in a dropdown. All you have to do is, specify the Group property value of each SelectListItem in your action method.

public IActionResult Create()
{
    var vm = new MyViewModel();

    var group1 = new SelectListGroup { Name = "Dev Team" };
    var group2 = new SelectListGroup { Name = "QA Team" };

    var employeeList = new List<SelectListItem>()
    {
        new SelectListItem() { Value = "1", Text = "Shyju", Group = group1 },
        new SelectListItem() { Value = "2", Text = "Bryan", Group = group1 },
        new SelectListItem() { Value = "3", Text = "Kevin", Group = group2 },
        new SelectListItem() { Value = "4", Text = "Alex", Group = group2 }
    };
    vm.Employees = employeeList;
    return View(vm);
}

There is no change in the view code. the select tag helper will now render the options inside 2 optgroup items.

For small tables DELETE is often faster and needs less aggressive locking (for heavy concurrent load):

DELETE FROM tbl;

With no WHERE condition.

For medium or bigger tables, go with TRUNCATE tbl, like @Greg posted.

Or you can apply HighlightBrushKey directly to the ListBox. Setter Property="Background" Value="Transparent" did NOT work. But I did have to set the Foreground to Black.

<ListBox  ... >
    <ListBox.ItemContainerStyle>
        <Style TargetType="ListBoxItem">
            <Style.Triggers>
                <Trigger Property="IsSelected" Value="True" >
                    <Setter Property="FontWeight" Value="Bold" />
                    <Setter Property="Background" Value="Transparent" />
                    <Setter Property="Foreground" Value="Black" />
                </Trigger>
            </Style.Triggers>
            <Style.Resources>
                <SolidColorBrush x:Key="{x:Static SystemColors.HighlightBrushKey}" Color="Transparent"/>
            </Style.Resources>
        </Style>                
    </ListBox.ItemContainerStyle>
</ListBox>

Python 3 handles strings a bit different. Originally there was just one type for strings: str. When unicode gained traction in the '90s the new unicode type was added to handle Unicode without breaking pre-existing code¹. This is effectively the same as str but with multibyte support.

In Python 3 there are two different types:

• The bytes type. This is just a sequence of bytes, Python doesn't know anything about how to interpret this as characters.
• The str type. This is also a sequence of bytes, but Python knows how to interpret those bytes as characters.
• The separate unicode type was dropped. str now supports unicode.

In Python 2 implicitly assuming an encoding could cause a lot of problems; you could end up using the wrong encoding, or the data may not have an encoding at all (e.g. it’s a PNG image).
Explicitly telling Python which encoding to use (or explicitly telling it to guess) is often a lot better and much more in line with the "Python philosophy" of "explicit is better than implicit".

This change is incompatible with Python 2 as many return values have changed, leading to subtle problems like this one; it's probably the main reason why Python 3 adoption has been so slow. Since Python doesn't have static typing² it's impossible to change this automatically with a script (such as the bundled 2to3).

• You can convert str to bytes with bytes('h€llo', 'utf-8'); this should produce b'H\xe2\x82\xacllo'. Note how one character was converted to three bytes.
• You can convert bytes to str with b'H\xe2\x82\xacllo'.decode('utf-8').

Of course, UTF-8 may not be the correct character set in your case, so be sure to use the correct one.

In your specific piece of code, nextline is of type bytes, not str, reading stdout and stdin from subprocess changed in Python 3 from str to bytes. This is because Python can't be sure which encoding this uses. It probably uses the same as sys.stdin.encoding (the encoding of your system), but it can't be sure.

You need to replace:

sys.stdout.write(nextline)

with:

sys.stdout.write(nextline.decode('utf-8'))

or maybe:

sys.stdout.write(nextline.decode(sys.stdout.encoding))

You will also need to modify if nextline == '' to if nextline == b'' since:

>>> '' == b''
False

Also see the Python 3 ChangeLog, PEP 358, and PEP 3112.

¹ There are some neat tricks you can do with ASCII that you can't do with multibyte character sets; the most famous example is the "xor with space to switch case" (e.g. chr(ord('a') ^ ord(' ')) == 'A') and "set 6th bit to make a control character" (e.g. ord('\t') + ord('@') == ord('I')). ASCII was designed in a time when manipulating individual bits was an operation with a non-negligible performance impact.

² Yes, you can use function annotations, but it's a comparatively new feature and little used.

Try this.

@Query("Select c from Registration c where c.place like '%'||:place||'%'")

Select cell B2 and click "Freeze Panes" this will freeze Row 1 and Column A.

For future reference, selecting Freeze Panes in Excel will freeze the rows above your selected cell and the columns to the left of your selected cell. For example, to freeze rows 1 and 2 and column A, you could select cell B3 and click Freeze Panes. You could also freeze columns A and B and row 1, by selecting cell C2 and clicking "Freeze Panes".

Visual Aid on Freeze Panes in Excel 2010 - http://www.dummies.com/how-to/content/how-to-freeze-panes-in-an-excel-2010-worksheet.html

Microsoft Reference Guide (More Complicated, but resourceful none the less) - http://office.microsoft.com/en-us/excel-help/freeze-or-lock-rows-and-columns-HP010342542.aspx

If you are running windows try this:

1. click start button on a keyboard
2. type task manager
3. right click and click run as administrator when the task manager opens
4. click on services then look for MySQL then
5. right click on it then click stop then close task manager and you are done.

to start it when you wand to use it, follow the same steps and click start this time

Well I did not think this was possible until I went and checked. In some previous version of Excel I could not do this. I am currently using Excel 2013.

This is what you want to do in a scatter plot:

1. right click on your data point

2. select "Format Data Labels" (note you may have to add data labels first)

3. put a check mark in "Values from Cells"
4. click on "select range" and select your range of labels you want on the points

UPDATE: Colouring Individual Labels

In order to colour the labels individually use the following steps:

1. select a label. When you first select, all labels for the series should get a box around them like the graph above.
2. Select the individual label you are interested in editing. Only the label you have selected should have a box around it like the graph below.
3. On the right hand side, as shown below, Select "TEXT OPTIONS".
4. Expand the "TEXT FILL" category if required.
5. Second from the bottom of the category list is "COLOR", select the colour you want from the pallet.

If you have the entire series selected instead of the individual label, text formatting changes should apply to all labels instead of just one.

You're declaring everything in the parent page. So the references to window and document are to the parent page's. If you want to do stuff to the iframe's, use iframe || iframe.contentWindow to access its window, and iframe.contentDocument || iframe.contentWindow.document to access its document.

There's a word for what's happening, possibly "lexical scope": What is lexical scope?

The only context of a scope is this. And in your example, the owner of the method is doc, which is the iframe's document. Other than that, anything that's accessed in this function that uses known objects are the parent's (if not declared in the function). It would be a different story if the function were declared in a different place, but it's declared in the parent page.

This is how I would write it:

(function () {
  var dom, win, doc, where, iframe;

  iframe = document.createElement('iframe');
  iframe.src = "javascript:false";

  where = document.getElementsByTagName('script')[0];
  where.parentNode.insertBefore(iframe, where);

  win = iframe.contentWindow || iframe;
  doc = iframe.contentDocument || iframe.contentWindow.document;

  doc.open();
  doc._l = (function (w, d) {
    return function () {
      w.vanishing_global = new Date().getTime();

      var js = d.createElement("script");
      js.src = 'test-vanishing-global.js?' + w.vanishing_global;

      w.name = "foobar";
      d.foobar = "foobar:" + Math.random();
      d.foobar = "barfoo:" + Math.random();
      d.body.appendChild(js);
    };
  })(win, doc);
  doc.write('<body onload="document._l();"></body>');
  doc.close();
})();

The aliasing of win and doc as w and d aren't necessary, it just might make it less confusing because of the misunderstanding of scopes. This way, they are parameters and you have to reference them to access the iframe's stuff. If you want to access the parent's, you still use window and document.

I'm not sure what the implications are of adding methods to a document (doc in this case), but it might make more sense to set the _l method on win. That way, things can be run without a prefix...such as <body onload="_l();"></body>

Have a look at either Left or Substring if you need to chop it up even more.

Google and the MySQL docs are a good place to start - you'll usually not get such a warm response if you've not even tried to help yourself before asking a question.

• Approach 6

/*Change units to "%", "px" or whatever*/_x000D_
_x000D_
#wrapper{_x000D_
  width: 50%;_x000D_
  height: 70vh;_x000D_
  background: rgba(0,0,0,.5);_x000D_
  position: absolute;_x000D_
  top: 0;_x000D_
  right: 0;_x000D_
  bottom: 0;_x000D_
  left: 0;_x000D_
  margin: auto;_x000D_
}_x000D_
#left{_x000D_
  width: 50%;_x000D_
  height: 50vh;_x000D_
  position: absolute;_x000D_
  top: 0;_x000D_
  bottom: 0;_x000D_
  left: 0;_x000D_
  margin: auto;_x000D_
  background: red;_x000D_
}_x000D_
#right{_x000D_
  width: 50%;_x000D_
  height: 50vh;_x000D_
  position: absolute;_x000D_
  top: 0;_x000D_
  bottom: 0;_x000D_
  right: 0;_x000D_
  margin: auto;_x000D_
  background: green;_x000D_
}_x000D_
.txt{_x000D_
  text-align: center;_x000D_
  line-height: 50vh;_x000D_
}

<div id="wrapper">_x000D_
   <div id="left" class="txt">Left</div>_x000D_
   <div id="right" class="txt">Right</div>_x000D_
</div>

    .container{ 
               width: 50%;  //Your container width here
               height: 50%; //Your container height here
               position: absolute; 
               top: 0; 
               right: 0;  
               bottom: 0; 
               left: 0; 
               margin: auto;
    }

You've already got some good answers, but I thought you might be interested in a bit of the background too.

Firstly you're missing the quotes. It should be:

"hello".encode("hex")

Secondly this codec hasn't been ported to Python 3.1. See here. It seems that they haven't yet decided whether or not these codecs should be included in Python 3 or implemented in a different way.

If you look at the diff file attached to that bug you can see the proposed method of implementing it:

import binascii
output = binascii.b2a_hex(input)

Let's say you stage a whole directory via git add <folder>, but you want to exclude a file from the staged list (i.e. the list that generates when running git status) and keep the modifications within the excluded file (you were working on something and it's not ready for commit, but you don't want to lose your work...). You could simply use:

git reset <file>

When you run git status, you will see that whatever file(s) you reset are unstaged and the rest of the files you added are still in the staged list.

Shift + Insert usually works throughout X11.

Vanilla JavaScript solution:-

document.querySelectorAll('.a.b')

Solved this issue by removing transform: translateY(50%); property.

v-flex does not have a display flex! Inspect v-flex in your browser and you will find out it is just a simple block div.

So, you should override it with display: flex in your HTML or CSS to make it work with justify-content.

It really depends on the implementation of the language being used! There is a common step in any implementation, though: your code is first compiled (translated) to intermediate code - something between your code and machine (binary) code - called bytecode (stored into .pyc files). Note that this is a one-time step that will not be repeated unless you modify your code.

And that bytecode is executed every time you are running the program. How? Well, when we run the program, this bytecode (inside a .pyc file) is passed as input to a Virtual Machine (VM)¹ - the runtime engine allowing our programs to be executed - that executes it.

Depending on the language implementation, the VM will either interpret the bytecode (in the case of CPython² implementation) or JIT-compile³ it (in the case of PyPy⁴ implementation).

Notes:

¹ an emulation of a computer system

² a bytecode interpreter; the reference implementation of the language, written in C and Python - most widely used

³ compilation that is being done during the execution of a program (at runtime)

⁴ a bytecode JIT compiler; an alternative implementation to CPython, written in RPython (Restricted Python) - often runs faster than CPython

body {
    background-image: url('../images/background.jpg');
    background-repeat: no-repeat;
    background-size: cover; /* will auto resize to fill the screen */
}

You can not run/execute an .exe file that is in the users local machine or through a site. The user must first download the exe file and then run the executable file.
So there is no possible way

The following code works only when the EXE is Present in the User's Machine.

<a href = "C:\folder_name\program.exe">

Syntax: (Triple dot ... ) --> Means we can add zero or more objects pass in an arguments or pass an array of type object.

public static void main(String[] args){}
public static void main(String... args){}

Definition: 1) The Object ... argument is just a reference to an array of Objects.

2) ('String []' or String ... ) It can able to handle any number of string objects. Internally it uses an array of reference type object.

i.e. Suppose we pass an Object array to the ... argument - will the resultant argument value be a two-dimensional array - because an Object[] is itself an Object:

3) If you want to call the method with a single argument and it happens to be an array, you have to explicitly wrap it in

another. method(new Object[]{array}); 
OR 
method((Object)array), which will auto-wrap.

Application: It majorly used when the number of arguments is dynamic(number of arguments know at runtime) and in overriding. General rule - In the method we can pass any types and any number of arguments. We can not add object(...) arguments before any specific arguments. i.e.

void m1(String ..., String s) this is a wrong approach give syntax error.
void m1(String s, String ...); This is a right approach. Must always give last order prefernces.   

You mean size() don't you?

#{MyBean.somelist.size()}

works for me (using JBoss Seam which has the Jboss EL extensions)

1. find out commit id

   git reflog

2. recover local branch you deleted by mistake

   git branch need-recover-branch-name commitId

3. push need-recover-branch-name again if you deleted remote branch too before

   git push origin need-recover-branch-name

Download it from here and extract LatoOFL.rar then go to TTF and open this font-face-generator click at Choose File choose font which you want to use and click at generate then download it and then go html file open it and you see the code like this

@font-face {
        font-family: "Lato Black";
        src: url('698242188-Lato-Bla.eot');
        src: url('698242188-Lato-Bla.eot?#iefix') format('embedded-opentype'),
        url('698242188-Lato-Bla.svg#Lato Black') format('svg'),
        url('698242188-Lato-Bla.woff') format('woff'),
        url('698242188-Lato-Bla.ttf') format('truetype');
        font-weight: normal;
        font-style: normal;
}
body{
    font-family: "Lato Black";
    direction: ltr;
}

change the src code and give the url where your this font directory placed, now you can use it at your website...

If you don't want to download it use this

<link type='text/css' href='http://fonts.googleapis.com/css?family=Lato:400,700' />

Please create a custom TextView and use it :

public class CustomTextView extends TextView {

    public CapitalizedTextView(Context context, AttributeSet attrs) {
        super(context, attrs);
    }

    @Override
    public void setText(CharSequence text, BufferType type) {
        if (text.length() > 0) {
            text = String.valueOf(text.charAt(0)).toUpperCase() + text.subSequence(1, text.length());
        }
        super.setText(text, type);
    }
}

This is one of the features missing from standard Scala that I have found so useful that I add it to my personal library. (You probably should have a personal library, too.) The code goes like so:

def printToFile(f: java.io.File)(op: java.io.PrintWriter => Unit) {
  val p = new java.io.PrintWriter(f)
  try { op(p) } finally { p.close() }
}

and it's used like this:

import java.io._
val data = Array("Five","strings","in","a","file!")
printToFile(new File("example.txt")) { p =>
  data.foreach(p.println)
}

I used apt-cache depends package to get all required packages in any case if the are already installed on system or not. So it will work always correct.
Because the command apt-cache works different, depending on language, you have to try this command on your system and adapt the command. apt-cache depends yourpackage
On an englisch system you get:

$ apt-cache depends yourpackage
node
  Depends: libax25
  Depends: libc6

On an german system you get: node

  Hängt ab von: libax25
  Hängt ab von: libc6

The englisch version with the term:
"Depends:"
You have to change the term "yourpackage" to your wish twice in this command, take care of this!

$ sudo apt-get --print-uris --yes -d --reinstall install yourpackage $(apt-cache depends yourpackage | grep "  Depends:" |  sed 's/  Depends://' | sed ':a;N;$!ba;s/\n//g') | grep ^\' | cut -d\' -f2 >downloads.list

And the german version with the term:
"Hängt ab von:"
You have to change the term "yourpackage" to your wish twice in this command, take care of this!
This text is used twice in this command, if you want to adapt it to your language take care of this!

$ sudo apt-get --print-uris --yes -d --reinstall install yourpackage $(apt-cache depends yourpackage | grep "Hängt ab von:" |  sed 's/  Hängt ab von://' | sed ':a;N;$!ba;s/\n//g') | grep ^\' | cut -d\' -f2 >downloads.list

You get the list of links in downloads.list
Check the list, go to your folder and run the list:

$ cd yourpathToYourFolder

$ wget --input-file downloads.list

All your required packages are in:

$ ls yourpathToYourFolder

Definitively, for any PHP project, you may want to use GuzzleHTTP for sending requests. Guzzle has very nice documentation you can check here. I just want to say that, you probably want to centralize the usage of the Client class of Guzzle in any component of your Laravel project (for example a trait) instead of being creating Client instances on several controllers and components of Laravel (as many articles and replies suggest).

I created a trait you can try to use, which allows you to send requests from any component of your Laravel project, just using it and calling to makeRequest.

namespace App\Traits;
use GuzzleHttp\Client;
trait ConsumesExternalServices
{
    /**
     * Send a request to any service
     * @return string
     */
    public function makeRequest($method, $requestUrl, $queryParams = [], $formParams = [], $headers = [], $hasFile = false)
    {
        $client = new Client([
            'base_uri' => $this->baseUri,
        ]);

        $bodyType = 'form_params';

        if ($hasFile) {
            $bodyType = 'multipart';
            $multipart = [];

            foreach ($formParams as $name => $contents) {
                $multipart[] = [
                    'name' => $name,
                    'contents' => $contents
                ];
            }
        }

        $response = $client->request($method, $requestUrl, [
            'query' => $queryParams,
            $bodyType => $hasFile ? $multipart : $formParams,
            'headers' => $headers,
        ]);

        $response = $response->getBody()->getContents();

        return $response;
    }
}

Notice this trait can even handle files sending.

If you want more details about this trait and some other stuff to integrate this trait to Laravel, check this article. Additionally, if interested in this topic or need major assistance, you can take my course which guides you in the whole process.

I hope it helps all of you.

Best wishes :)

I had the same problem. I changed the localhost parameter in the mysqli object to '127.0.0.1' instead of writing 'localhost'. It worked; I’m not sure how or why.

$db_connection = new mysqli("127.0.0.1","root","","db_name");

Hope it helps.

I had the same problem, this is my solution:

var functionsToCall = new Array();_x000D_
_x000D_
function f1() {_x000D_
    $.ajax({_x000D_
        type:"POST",_x000D_
        url: "/some/url",_x000D_
        success: function(data) {_x000D_
            doSomethingWith(data);_x000D_
            //When done, call the next function.._x000D_
            callAFunction("parameter");_x000D_
        }_x000D_
    });_x000D_
}_x000D_
_x000D_
function f2() {_x000D_
    /*...*/_x000D_
    callAFunction("parameter2");_x000D_
}_x000D_
function f3() {_x000D_
    /*...*/_x000D_
    callAFunction("parameter3");_x000D_
}_x000D_
function f4() {_x000D_
    /*...*/_x000D_
    callAFunction("parameter4");_x000D_
}_x000D_
function f5() {_x000D_
    /*...*/_x000D_
    callAFunction("parameter5");_x000D_
}_x000D_
function f6() {_x000D_
    /*...*/_x000D_
    callAFunction("parameter6");_x000D_
}_x000D_
function f7() {_x000D_
    /*...*/_x000D_
    callAFunction("parameter7");_x000D_
}_x000D_
function f8() {_x000D_
    /*...*/_x000D_
    callAFunction("parameter8");_x000D_
}_x000D_
function f9() {_x000D_
    /*...*/_x000D_
    callAFunction("parameter9");_x000D_
}_x000D_
    _x000D_
function callAllFunctionsSy(params) {_x000D_
 functionsToCall.push(f1);_x000D_
 functionsToCall.push(f2);_x000D_
 functionsToCall.push(f3);_x000D_
 functionsToCall.push(f4);_x000D_
 functionsToCall.push(f5);_x000D_
 functionsToCall.push(f6);_x000D_
 functionsToCall.push(f7);_x000D_
 functionsToCall.push(f8);_x000D_
 functionsToCall.push(f9);_x000D_
 functionsToCall.reverse();_x000D_
 callAFunction(params);_x000D_
}_x000D_
_x000D_
function callAFunction(params) {_x000D_
 if (functionsToCall.length > 0) {_x000D_
  var f=functionsToCall.pop();_x000D_
  f(params);_x000D_
 }_x000D_
}

change user to root

sodu su -

browse to etc

vi sudoers

look for root user in user priviledge section. you will get it like

root ALL=(ALL:ALL) ALL 

make same entry for your user name. if you username is 'myuser' then add

myuser ALL=(ALL:ALL) ALL

it will look like

root ALL=(ALL:ALL) ALL 

myuser ALL=(ALL:ALL) ALL 

save it. change root user to your user. now try the same where you were getting the sudoers issue

DECLARE @CMonth int=null
DECLARE @lCYear int=null

SET @lCYear=(SELECT  DATEPART(YEAR,GETDATE()))
SET @CMonth=(SELECT  DATEPART(MONTH,GETDATE()))

You can do that easily by DataGrip .

1. First save your excel file as csv formate . Open the excel file then SaveAs as csv format
2. Go to datagrip then create the table structure according to the csv file . Suggested create the column name as the column name as Excel column
3. right click on the table name from the list of table name of your database then click of the import data from file . Then select the converted csv file .

.

User-specific settings should be written to HKCU\Software, machine-specific settings to HKLM\Software. Under these keys, structure [software vendor name]\[application name] (e.g. HKLM\Software\Microsoft\Internet Explorer) may be the most common, but that's just a convention, not a law of nature.

Many (most?) applications also add their uninstall entries to HKLM\Software\Microsoft\Windows\CurrentVersion\Uninstall\[app name], but again, not all applications do this.

These are the most important keys; however, contents of the registry do not have to represent the installed software exactly - maybe the application was installed once, but then was manually deleted, or maybe the uninstaller didn't remove all traces of it. If you want to be sure, check the filesystem to see if the application still exists where its registry entries say it is.

Edit:

If you're a member of the group Administrators, you can check the HKEY_USERS hive - each user's HKCU actually resides there (you'll need to know the user SID, or go through all of them).

Note: As @Brian Ensink says, "installed" is a bit of a vague concept - are we trying to find what the user could run? Some software doesn't even write to the Registry at all: search for "portable apps" to see apps that have been specifically modified to run directly from media (CD/USB) and not to leave any traces on the computer. We may also have to scan the disks, and network disks, and anything the user downloads, and world-accessible Windows shares in the Internet (yes, such things exist legitimately - \\live.sysinternals.com\tools comes to mind). In this direction, there's no real limit of what the user can run, unless prevented by system policies.

In Python 3.x, raw_input was renamed to input and the Python 2.x input was removed.

This means that, just like raw_input, input in Python 3.x always returns a string object.

To fix the problem, you need to explicitly make those inputs into integers by putting them in int:

x = int(input("Enter a number: "))
y = int(input("Enter a number: "))

Here is the complete code

#include <bits/stdc++.h>

using namespace std;

typedef unsigned char BYTE;

int main() {
  //method 1;
  std::vector<BYTE> data = {'H','E','L','L','O','1','2','3'};
  //string constructor accepts only const char
  std::string s((const char*)&(data[0]), data.size());
  std::cout << s << std::endl;

  //method 2
  std::string s2(data.begin(),data.end());
  std::cout << s2 << std::endl;

  //method 3
  std::string s3(reinterpret_cast<char const*>(&data[0]), data.size()) ;
  std::cout << s3 << std::endl;
 
  return 0;
}

There is an important bit that is not mentioned in the article to which you linked and that is flex-basis. By default flex-basis is auto.

From the spec:

If the specified flex-basis is auto, the used flex basis is the value of the flex item’s main size property. (This can itself be the keyword auto, which sizes the flex item based on its contents.)

Each flex item has a flex-basis which is sort of like its initial size. Then from there, any remaining free space is distributed proportionally (based on flex-grow) among the items. With auto, that basis is the contents size (or defined size with width, etc.). As a result, items with bigger text within are being given more space overall in your example.

If you want your elements to be completely even, you can set flex-basis: 0. This will set the flex basis to 0 and then any remaining space (which will be all space since all basises are 0) will be proportionally distributed based on flex-grow.

li {
    flex-grow: 1;
    flex-basis: 0;
    /* ... */
}

This diagram from the spec does a pretty good job of illustrating the point.

And here is a working example with your fiddle.

Update: I'm doing this with date.toISOString().substr(0, 10). Gives the same result as the accepted answer and has good support.

We bought a Rebex File Transfer Pack, and all is fine. The API is easy, we haven't any problem with comunications, proxy servers etc...

But I havent chance to compare it with another SFTP/FTPS component.

If you are asking if you can pair two devices without the user EVER approving the pairing, no it cannot be done, it is a security feature. If you are paired over Bluetooth there is no need to exchange data over NFC, just exchange data over the Bluetooth link.

I don't think you can circumvent Bluetooth security by passing an authentication packet over NFC, but I could be wrong.

The SQL solution wich combines "ROWS BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW" and "SUM" did exactly what i wanted to achieve. Thank you so much!

If it can help anyone, here was my case. I wanted to cumulate +1 in a column whenever a maker is found as "Some Maker" (example). If not, no increment but show previous increment result.

So this piece of SQL:

SUM( CASE [rmaker] WHEN 'Some Maker' THEN  1 ELSE 0 END) 
OVER 
(PARTITION BY UserID ORDER BY UserID,[rrank] ROWS BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW) AS Cumul_CNT

Allowed me to get something like this:

User 1  Rank1   MakerA      0  
User 1  Rank2   MakerB      0  
User 1  Rank3   Some Maker  1  
User 1  Rank4   Some Maker  2  
User 1  Rank5   MakerC      2
User 1  Rank6   Some Maker  3  
User 2  Rank1   MakerA      0  
User 2  Rank2   SomeMaker   1  

Explanation of above: It starts the count of "some maker" with 0, Some Maker is found and we do +1. For User 1, MakerC is found so we dont do +1 but instead vertical count of Some Maker is stuck to 2 until next row. Partitioning is by User so when we change user, cumulative count is back to zero.

I am at work, I dont want any merit on this answer, just say thank you and show my example in case someone is in the same situation. I was trying to combine SUM and PARTITION but the amazing syntax "ROWS BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW" completed the task.

Thanks! Groaker

If you use YSlow with Firebug and analyse your page performance, YSlow will certainly tell you what artifacts on your page are not gzip'd!

PHP has some nice built in functions for getting geographic location. Maybe have a look here: http://php.net/manual/en/ref.geoip.php

According to php manual, "This extension requires the GeoIP C library version 1.4.0 or higher to be installed. You can grab the latest version from » http://www.maxmind.com/app/c and compile it yourself."

You can not "attach" a SASS/SCSS file to an HTML document.

SASS/SCSS is a CSS preprocessor that runs on the server and compiles to CSS code that your browser understands.

There are client-side alternatives to SASS that can be compiled in the browser using javascript such as LESS CSS, though I advise you compile to CSS for production use.

It's as simple as adding 2 lines of code to your HTML file.

<link rel="stylesheet/less" type="text/css" href="styles.less" />
<script src="less.js" type="text/javascript"></script>

I found a way around this after 3-4 hours of googling. I have added the following

<startup selegacyv2runtimeactivationpolicy="true">
  <supportedruntime version="v4.0" sku=".NETFramework,Version=v4.0,Profile=Client" />
</startup>

If this doesn't solve your problem then--> In the Project References Right Click on DLL where you getting error --> Select Properties--> Check the Run-time Version --> If it is v2.0.50727 then we know the problem. The Problem is :- you are having 2.0 Version of respective DLL. Solution is:- You can delete the respective DLL from the Project references and then download the latest version of DLL's from the corresponding website and add the reference of the latest version DLL reference then it will work.

Jquery 3.0 has some breaking changes that remove certain methods due to conflicts. Your error is most likely due to one of these changes such as the removal of the .load() event.

Read more in the jQuery Core 3.0 Upgrade Guide

To fix this you either need to rewrite the code to be compatible with Jquery 3.0 or else you can use the JQuery Migrate plugin which restores the deprecated and/or removed APIs and behaviours.

What does const mean
First, realize that the semantics of a "const" keyword means different things to different people:

• read-only reference - Java final semantics - reference variable itself cannot be reassigned to point to another instance (memory location), but the instance itself is modifiable
• readable-only reference - C const pointer/reference semantics - means this reference cannot be used to modify the instance (e.g. cannot assign to instance variables, cannot invoke mutable methods) - affects the reference variable only, so a non-const reference pointing to the same instance could modify the instance
• immutable object - means the instance itself cannot be modified - applies to instance, so any non-const reference would not be allowed or could not be used to modify the instance
• some combination of the the above?
• others?

Why or Why Not const
Second, if you really want to dig into some of the "pro" vs "con" arguments, see the discussion under this request for enhancement (RFE) "bug". This RFE requests a "readable-only reference"-type "const" feature. Opened in 1999 and then closed/rejected by Sun in 2005, the "const" topic was vigorously debated:

http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4211070

While there are a lot of good arguments on both sides, some of the oft-cited (but not necessarily compelling or clear-cut) reasons against const include:

• may have confusing semantics that may be misused and/or abused (see the What does const mean above)
• may duplicate capability otherwise available (e.g. designing an immutable class, using an immutable interface)
• may be feature creep, leading to a need for other semantic changes such as support for passing objects by value

Before anyone tries to debate me about whether these are good or bad reasons, note that these are not my reasons. They are simply the "gist" of some of the reasons I gleaned from skimming the RFE discussion. I don't necessarily agree with them myself - I'm simply trying to cite why some people (not me) may feel a const keyword may not be a good idea. Personally, I'd love more "const" semantics to be introduced to the language in an unambiguous manner.

Possible Channel-Specific Issue

I had this issue (again) and it turned out I installed from the conda-forge channel; removing it and reinstalling from anaconda channel instead fixed it for me.

Update: I again had the same problem with a new env, this time I did install nb_conda_kernels from anaconda channel, but my jupyter_client was from the conda-forge channel. Uninstalling nb_conda_kernels and reinstalling updated that to a higher-priority channel.

So make sure you've installed from the correct channels :)

For example, like this:

const querystring = require('querystring');
const https = require('https');

var postData = querystring.stringify({
    'msg' : 'Hello World!'
});

var options = {
  hostname: 'posttestserver.com',
  port: 443,
  path: '/post.php',
  method: 'POST',
  headers: {
       'Content-Type': 'application/x-www-form-urlencoded',
       'Content-Length': postData.length
     }
};

var req = https.request(options, (res) => {
  console.log('statusCode:', res.statusCode);
  console.log('headers:', res.headers);

  res.on('data', (d) => {
    process.stdout.write(d);
  });
});

req.on('error', (e) => {
  console.error(e);
});

req.write(postData);
req.end();

+-------------------------------------------------------------------------------+
¦    METHOD    ¦            TRANSIENT          ¦            DETACHED            ¦
¦--------------+-------------------------------+--------------------------------¦
¦              ¦       sets id if doesn't      ¦   sets new id even if object   ¦
¦    save()    ¦     exist, persists to db,    ¦    already has it, persists    ¦
¦              ¦    returns attached object    ¦ to DB, returns attached object ¦
¦--------------+-------------------------------+--------------------------------¦
¦              ¦       sets id on object       ¦             throws             ¦
¦   persist()  ¦     persists object to DB     ¦       PersistenceException     ¦
¦              ¦                               ¦                                ¦
¦--------------+-------------------------------+--------------------------------¦
¦              ¦                               ¦                                ¦
¦   update()   ¦           Exception           ¦     persists and reattaches    ¦
¦              ¦                               ¦                                ¦
¦--------------+-------------------------------+--------------------------------¦
¦              ¦  copy the state of object in  ¦    copy the state of obj in    ¦
¦    merge()   ¦     DB, doesn't attach it,    ¦      DB, doesn't attach it,    ¦
¦              ¦    returns attached object    ¦     returns attached object    ¦
¦--------------+-------------------------------+--------------------------------¦
¦              ¦                               ¦                                ¦
¦saveOrUpdate()¦           as save()           ¦            as update()         ¦
¦              ¦                               ¦                                ¦
+-------------------------------------------------------------------------------+

This project https://github.com/FilipDeVos/sp_select has a stored procedure sp_select which allows for selecting from a temp table.

Usage:

exec sp_select 'tempDb..#myTempTable'

While debugging a stored procedure you can open a new tab and run this command to see the contents of the temp table.

Here's my ultimate answer to this.

Also apparently javascript's new Date(year, month, day) constructor doesn't account for leap seconds too.

// Parses an Excel Date ("serial") into a
// corresponding javascript Date in UTC+0 timezone.
//
// Doesn't account for leap seconds.
// Therefore is not 100% correct.
// But will do, I guess, since we're
// not doing rocket science here.
//
// https://www.pcworld.com/article/3063622/software/mastering-excel-date-time-serial-numbers-networkdays-datevalue-and-more.html
// "If you need to calculate dates in your spreadsheets,
//  Excel uses its own unique system, which it calls Serial Numbers".
//
lib.parseExcelDate = function (excelSerialDate) {
  // "Excel serial date" is just
  // the count of days since `01/01/1900`
  // (seems that it may be even fractional).
  //
  // The count of days elapsed
  // since `01/01/1900` (Excel epoch)
  // till `01/01/1970` (Unix epoch).
  // Accounts for leap years
  // (19 of them, yielding 19 extra days).
  const daysBeforeUnixEpoch = 70 * 365 + 19;

  // An hour, approximately, because a minute
  // may be longer than 60 seconds, see "leap seconds".
  const hour = 60 * 60 * 1000;

  // "In the 1900 system, the serial number 1 represents January 1, 1900, 12:00:00 a.m.
  //  while the number 0 represents the fictitious date January 0, 1900".
  // These extra 12 hours are a hack to make things
  // a little bit less weird when rendering parsed dates.
  // E.g. if a date `Jan 1st, 2017` gets parsed as
  // `Jan 1st, 2017, 00:00 UTC` then when displayed in the US
  // it would show up as `Dec 31st, 2016, 19:00 UTC-05` (Austin, Texas).
  // That would be weird for a website user.
  // Therefore this extra 12-hour padding is added
  // to compensate for the most weird cases like this
  // (doesn't solve all of them, but most of them).
  // And if you ask what about -12/+12 border then
  // the answer is people there are already accustomed
  // to the weird time behaviour when their neighbours
  // may have completely different date than they do.
  //
  // `Math.round()` rounds all time fractions
  // smaller than a millisecond (e.g. nanoseconds)
  // but it's unlikely that an Excel serial date
  // is gonna contain even seconds.
  //
  return new Date(Math.round((excelSerialDate - daysBeforeUnixEpoch) * 24 * hour) + 12 * hour);
};

Addition to Alex' answer:

JavaScript

$(function() {
    $('input[type="submit"]').prop('disabled', true);
    $('#check').on('input', function(e) {
        if(this.value.length === 6) {
            $('input[type="submit"]').prop('disabled', false);
        } else {
            $('input[type="submit"]').prop('disabled', true);
        }
    });
});

HTML

<input type="text" maxlength="6" id="check" data-minlength="6" /><br />
<input type="submit" value="send" />

JsFiddle

But: You should always remember to validate the user input on the server side again. The user could modify the local HTML or disable JavaScript.

To bind the data to ComboBox

List<ComboData> ListData = new List<ComboData>();
ListData.Add(new ComboData { Id = "1", Value = "One" });
ListData.Add(new ComboData { Id = "2", Value = "Two" });
ListData.Add(new ComboData { Id = "3", Value = "Three" });
ListData.Add(new ComboData { Id = "4", Value = "Four" });
ListData.Add(new ComboData { Id = "5", Value = "Five" });

cbotest.ItemsSource = ListData;
cbotest.DisplayMemberPath = "Value";
cbotest.SelectedValuePath = "Id";

cbotest.SelectedValue = "2";

ComboData looks like:

public class ComboData
{ 
  public int Id { get; set; } 
  public string Value { get; set; } 
}

(note that Id and Value have to be properties, not class fields)

When an element, such as a div is floated, its parent container no longer considers its height, i.e.

<div id="main">
  <div id="child" style="float:left;height:40px;"> Hi</div>
</div>

The parent container will not be be 40 pixels tall by default. This causes a lot of weird little quirks if you're using these containers to structure layout.

So the clearfix class that various frameworks use fixes this problem by making the parent container "acknowledge" the contained elements.

Day to day, I normally just use frameworks such as 960gs, Twitter Bootstrap for laying out and not bothering with the exact mechanics.

Can read more here

http://www.webtoolkit.info/css-clearfix.html

HttpClient webClient = new HttpClient();
Uri uri = new Uri("your url");
HttpResponseMessage response = await webClient.GetAsync(uri)
var jsonString = await response.Content.ReadAsStringAsync();
var objData = JsonConvert.DeserializeObject<List<CategoryModel>>(jsonString);

Process is to clean up and then reinstall with the following commands:

rm -rf /usr/local/Cellar /usr/local/.git && brew cleanup
ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install )"

Notes:

• Always check curl | bash (or ruby) commands before running them
• http://brew.sh/ (for installation notes)
• https://raw.githubusercontent.com/Homebrew/install/master/install (for clean up notes, see "Homebrew is already installed")

If you have user specific credentials ( i.e each developer might have different username/password ) then I would recommend using the gradle-properties-plugin.

1. Put defaults in gradle.properties
2. Each developer overrides with gradle-local.properties ( this should be git ignored ).

This is better than overriding using $USER_HOME/.gradle/gradle.properties because different projects might have same property names.

The solution provided by BBoy works fine. But in my case I had to use

e.Graphics.DrawImage(memoryImage, e.PageBounds);

This will print only the form. When I use MarginBounds it prints the entire screen even if the form is smaller than the monitor screen. PageBounds solved that issue. Thanks to BBoy!

The non-greedy regex modifiers are like their greedy counter-parts but with a ? immediately following them:

*  - zero or more
*? - zero or more (non-greedy)
+  - one or more
+? - one or more (non-greedy)
?  - zero or one
?? - zero or one (non-greedy)

In my case the problem was caused by my passing a null InputStream to the ObjectMapper.readValue call:

ObjectMapper objectMapper = ...
InputStream is = null; // The code here was returning null.
Foo foo = objectMapper.readValue(is, Foo.class)

I am guessing that this is the most common reason for this exception.

Here's an extract from a .gitignore on a recent project I was working on. I've extracted the ones that I believe are related to Visual Studio, including the compilation outputs; it's a cross platform project, so there are various other ignore rules for files produced by other build systems, and I can't guarantee that I separated them out exactly.

*.dll
*.exe
*.exp
*.ilk
*.lib
*.ncb
*.log
*.pdb
*.vcproj.*.user
[Dd]ebug
[Rr]elease

Perhaps this question should be Community Wiki, so we can all edit together one master list with comments about which files should be ignored for which types of project?

another possible solution, just using media queries

@media screen and (min-width:1px) and (max-width:767px) {
    .footer {
    }
}
/* no style for smaller or else it goes weird.*/
@media screen and (min-width:768px) and (max-width:991px) {
    .footer{
        bottom: 0;
        width: 100%;
        position: absolute;
    }
}
@media screen and (min-width:992px) and (max-width:1199px) {
    .footer{
        bottom: 0;
        width: 100%;
        position: absolute;
    }
}
@media screen and (min-width:1120px){
    .footer{
        bottom: 0;
        width: 100%;
        position: absolute;
    }
}

What's happening is that since the the TextView is filling the whole width of the inner LinearLayout it is already in the horizontal center of the layout. When you use android:layout_gravity it places the widget, as a whole, in the gravity specified. Instead of placing the whole widget center what you're really trying to do is place the content in the center which can be accomplished with android:gravity="center_horizontal" and the android:layout_gravity attribute can be removed.

To add my 2 cents, if you want to update your data source with the new value of your Control, you need to call UpdateSource() instead of UpdateTarget():

((TextBox)sender).GetBindingExpression(ComboBox.TextProperty).UpdateSource();

Alternate solution to doing shallow clone (git clone --depth=1 <URL>) would be, if remote side supports it, to use --remote option of git archive:

$ git archive --format=tar --remote=<repository URL> HEAD | tar xf -

Or, if remote repository in question is browse-able using some web interface like gitweb or GitHub, then there is a chance that it has 'snapshot' feature, and you can download latest version (without versioning information) from web interface.

To reset the IDs of my User table, I use the following SQL query. It's been said above that this will ruin any relationships you may have with any other tables.

ALTER TABLE `users` DROP `id`;
ALTER TABLE `users` AUTO_INCREMENT = 1;
ALTER TABLE `users` ADD `id` int UNSIGNED NOT NULL AUTO_INCREMENT PRIMARY KEY FIRST;

A code example for drake's answer to use nan_to_num:

>>> import numpy as np
>>> A = np.array([[1, 2, 3], [0, 3, np.NaN]])
>>> A = np.nan_to_num(A)
>>> A
array([[ 1.,  2.,  3.],
       [ 0.,  3.,  0.]])

Closing the current Metro Bundler and restarting by resetting the cache worked for me

npm start -- --reset-cache

There are two main ways that you can do this. One of them is the standard CakePHP way, and the other is using a custom join.

It's worth pointing out that this advice is for CakePHP 2.x, not 3.x.

The CakePHP Way

You would create a relationship with your User model and Messages Model, and use the containable behavior:

class User extends AppModel {
    public $actsAs = array('Containable');
    public $hasMany = array('Message');
}

class Message extends AppModel {
    public $actsAs = array('Containable');
    public $belongsTo = array('User');
}

You need to change the messages.from column to be messages.user_id so that cake can automagically associate the records for you.

Then you can do this from the messages controller:

$this->Message->find('all', array(
    'contain' => array('User')
    'conditions' => array(
        'Message.to' => 4
    ),
    'order' => 'Message.datetime DESC'
));

The (other) CakePHP way

I recommend using the first method, because it will save you a lot of time and work. The first method also does the groundwork of setting up a relationship which can be used for any number of other find calls and conditions besides the one you need now. However, cakePHP does support a syntax for defining your own joins. It would be done like this, from the MessagesController:

$this->Message->find('all', array(
    'joins' => array(
        array(
            'table' => 'users',
            'alias' => 'UserJoin',
            'type' => 'INNER',
            'conditions' => array(
                'UserJoin.id = Message.from'
            )
        )
    ),
    'conditions' => array(
        'Message.to' => 4
    ),
    'fields' => array('UserJoin.*', 'Message.*'),
    'order' => 'Message.datetime DESC'
));

Note, I've left the field name messages.from the same as your current table in this example.

Using two relationships to the same model

Here is how you can do the first example using two relationships to the same model:

class User extends AppModel {
    public $actsAs = array('Containable');
    public $hasMany = array(
        'MessagesSent' => array(
            'className'  => 'Message',
            'foreignKey' => 'from'
         )
    );
    public $belongsTo = array(
        'MessagesReceived' => array(
            'className'  => 'Message',
            'foreignKey' => 'to'
         )
    );
}

class Message extends AppModel {
    public $actsAs = array('Containable');
    public $belongsTo = array(
        'UserFrom' => array(
            'className'  => 'User',
            'foreignKey' => 'from'
        )
    );
    public $hasMany = array(
        'UserTo' => array(
            'className'  => 'User',
            'foreignKey' => 'to'
        )
    );
}

Now you can do your find call like this:

$this->Message->find('all', array(
    'contain' => array('UserFrom')
    'conditions' => array(
        'Message.to' => 4
    ),
    'order' => 'Message.datetime DESC'
));

I had the exact same problem. Running mvn clean install instead of mvn clean compile resolved it. The difference only occurs when using multi-maven-project since the project dependencies are uploaded to the local repository by using install.

You can use display:inline-block instead of float and vertical-align:middle with this CSS:

.col-lg-4, .col-lg-8 {
    float:none;
    display:inline-block;
    vertical-align:middle;
    margin-right:-4px;
}

The demo http://bootply.com/94402

http://asktom.oracle.com/tkyte/Misc/DateDiff.html - link dead as of 2012-01-30

Looks like this is the resource:

http://asktom.oracle.com/pls/asktom/ASKTOM.download_file?p_file=6551242712657900129

echo file_get_contents('http://localhost/web/a.php'); //Best Example

import jxl.Sheet;
import jxl.Workbook;
import jxl.read.biff.BiffException;

String FilePath = "/home/lahiru/Desktop/Sample.xls";
FileInputStream fs = new FileInputStream(FilePath);
Workbook wb = Workbook.getWorkbook(fs);

String <variable> = sh.getCell("A2").getContents();

The folder containing your Anaconda installation contains a subfolder called conda-meta with json files for all installed packages, including one for Anaconda itself. Look for anaconda-<version>-<build>.json.

My file is called anaconda-5.0.1-py27hdb50712_1.json, and at the bottom is more info about the version:

"installed_by": "Anaconda2-5.0.1-Windows-x86_64.exe", 
"link": { "source": "C:\\ProgramData\\Anaconda2\\pkgs\\anaconda-5.0.1-py27hdb50712_1" }, 
"name": "anaconda", 
"platform": "win", 
"subdir": "win-64", 
"url": "https://repo.continuum.io/pkgs/main/win-64/anaconda-5.0.1-py27hdb50712_1.tar.bz2", 
"version": "5.0.1"

(Slightly edited for brevity.)

The output from conda -V is the conda version.

Interface is the class that contains an abstract method that cannot create any object.Since Interface cannot create the object and its not a pure class, Its no worth implementing it.

Only call time pass-by-reference is removed. So change:

call_user_func($func, &$this, &$client ...

To this:

call_user_func($func, $this, $client ...

&$this should never be needed after PHP4 anyway period.

If you absolutely need $client to be passed by reference, update the function ($func) signature instead (function func(&$client) {)

Just using a class to only hide some...based on https://stackoverflow.com/a/17541916/1815624

/* HIDE RADIO */_x000D_
.hiddenradio [type=radio] { _x000D_
  position: absolute;_x000D_
  opacity: 0;_x000D_
  width: 0;_x000D_
  height: 0;_x000D_
}_x000D_
_x000D_
/* IMAGE STYLES */_x000D_
.hiddenradio [type=radio] + img {_x000D_
  cursor: pointer;_x000D_
}_x000D_
_x000D_
/* CHECKED STYLES */_x000D_
.hiddenradio [type=radio]:checked + img {_x000D_
  outline: 2px solid #f00;_x000D_
}

<div class="hiddenradio">_x000D_
<label>_x000D_
  <input type="radio" name="test" value="small" checked>_x000D_
  <img src="http://placehold.it/40x60/0bf/fff&text=A">_x000D_
</label>_x000D_
_x000D_
<label>_x000D_
  <input type="radio" name="test" value="big">_x000D_
  <img src="http://placehold.it/40x60/b0f/fff&text=B">_x000D_
</label>_x000D_
</div>_x000D_
_x000D_
<div class="">_x000D_
<label>_x000D_
  <input type="radio" name="test" value="small" checked>_x000D_
  <img src="http://placehold.it/40x60/0bf/fff&text=A">_x000D_
</label>_x000D_
_x000D_
<label>_x000D_
  <input type="radio" name="test" value="big">_x000D_
  <img src="http://placehold.it/40x60/b0f/fff&text=B">_x000D_
</label>_x000D_
</div>

Beginner

Introductory, no previous programming experience

• C++ Primer * (Stanley Lippman, Josée Lajoie, and Barbara E. Moo) (updated for C++11) Coming at 1k pages, this is a very thorough introduction into C++ that covers just about everything in the language in a very accessible format and in great detail. The fifth edition (released August 16, 2012) covers C++11. [Review]

  ^{* Not to be confused with C++ Primer Plus (Stephen Prata), with a significantly less favorable review.}

• Programming: Principles and Practice Using C++ (Bjarne Stroustrup, 2nd Edition - May 25, 2014) (updated for C++11/C++14) An introduction to programming using C++ by the creator of the language. A good read, that assumes no previous programming experience, but is not only for beginners.

Introductory, with previous programming experience

• A Tour of C++ (Bjarne Stroustrup) (2nd edition for C++17) The “tour” is a quick (about 180 pages and 14 chapters) tutorial overview of all of standard C++ (language and standard library, and using C++11) at a moderately high level for people who already know C++ or at least are experienced programmers. This book is an extended version of the material that constitutes Chapters 2-5 of The C++ Programming Language, 4th edition.

• Accelerated C++ (Andrew Koenig and Barbara Moo, 1st Edition - August 24, 2000) This basically covers the same ground as the C++ Primer, but does so on a fourth of its space. This is largely because it does not attempt to be an introduction to programming, but an introduction to C++ for people who've previously programmed in some other language. It has a steeper learning curve, but, for those who can cope with this, it is a very compact introduction to the language. (Historically, it broke new ground by being the first beginner's book to use a modern approach to teaching the language.) Despite this, the C++ it teaches is purely C++98. [Review]

Best practices

• Effective C++ (Scott Meyers, 3rd Edition - May 22, 2005) This was written with the aim of being the best second book C++ programmers should read, and it succeeded. Earlier editions were aimed at programmers coming from C, the third edition changes this and targets programmers coming from languages like Java. It presents ~50 easy-to-remember rules of thumb along with their rationale in a very accessible (and enjoyable) style. For C++11 and C++14 the examples and a few issues are outdated and Effective Modern C++ should be preferred. [Review]

• Effective Modern C++ (Scott Meyers) This is basically the new version of Effective C++, aimed at C++ programmers making the transition from C++03 to C++11 and C++14.

• Effective STL (Scott Meyers) This aims to do the same to the part of the standard library coming from the STL what Effective C++ did to the language as a whole: It presents rules of thumb along with their rationale. [Review]

Intermediate

• More Effective C++ (Scott Meyers) Even more rules of thumb than Effective C++. Not as important as the ones in the first book, but still good to know.

• Exceptional C++ (Herb Sutter) Presented as a set of puzzles, this has one of the best and thorough discussions of the proper resource management and exception safety in C++ through Resource Acquisition is Initialization (RAII) in addition to in-depth coverage of a variety of other topics including the pimpl idiom, name lookup, good class design, and the C++ memory model. [Review]

• More Exceptional C++ (Herb Sutter) Covers additional exception safety topics not covered in Exceptional C++, in addition to discussion of effective object-oriented programming in C++ and correct use of the STL. [Review]

• Exceptional C++ Style (Herb Sutter) Discusses generic programming, optimization, and resource management; this book also has an excellent exposition of how to write modular code in C++ by using non-member functions and the single responsibility principle. [Review]

• C++ Coding Standards (Herb Sutter and Andrei Alexandrescu) “Coding standards” here doesn't mean “how many spaces should I indent my code?” This book contains 101 best practices, idioms, and common pitfalls that can help you to write correct, understandable, and efficient C++ code. [Review]

• C++ Templates: The Complete Guide (David Vandevoorde and Nicolai M. Josuttis) This is the book about templates as they existed before C++11. It covers everything from the very basics to some of the most advanced template metaprogramming and explains every detail of how templates work (both conceptually and at how they are implemented) and discusses many common pitfalls. Has excellent summaries of the One Definition Rule (ODR) and overload resolution in the appendices. A second edition covering C++11, C++14 and C++17 has been already published. [Review]

• C++ 17 - The Complete Guide (Nicolai M. Josuttis) This book describes all the new features introduced in the C++17 Standard covering everything from the simple ones like 'Inline Variables', 'constexpr if' all the way up to 'Polymorphic Memory Resources' and 'New and Delete with overaligned Data'. [Review]

• C++ in Action (Bartosz Milewski). This book explains C++ and its features by building an application from ground up. [Review]

• Functional Programming in C++ (Ivan Cukic). This book introduces functional programming techniques to modern C++ (C++11 and later). A very nice read for those who want to apply functional programming paradigms to C++.

• Professional C++ (Marc Gregoire, 5th Edition - Feb 2021) Provides a comprehensive and detailed tour of the C++ language implementation replete with professional tips and concise but informative in-text examples, emphasizing C++20 features. Uses C++20 features, such as modules and std::format throughout all examples.

Advanced

• Modern C++ Design (Andrei Alexandrescu) A groundbreaking book on advanced generic programming techniques. Introduces policy-based design, type lists, and fundamental generic programming idioms then explains how many useful design patterns (including small object allocators, functors, factories, visitors, and multi-methods) can be implemented efficiently, modularly, and cleanly using generic programming. [Review]

• C++ Template Metaprogramming (David Abrahams and Aleksey Gurtovoy)

• C++ Concurrency In Action (Anthony Williams) A book covering C++11 concurrency support including the thread library, the atomics library, the C++ memory model, locks and mutexes, as well as issues of designing and debugging multithreaded applications. A second edition covering C++14 and C++17 has been already published. [Review]

• Advanced C++ Metaprogramming (Davide Di Gennaro) A pre-C++11 manual of TMP techniques, focused more on practice than theory. There are a ton of snippets in this book, some of which are made obsolete by type traits, but the techniques, are nonetheless useful to know. If you can put up with the quirky formatting/editing, it is easier to read than Alexandrescu, and arguably, more rewarding. For more experienced developers, there is a good chance that you may pick up something about a dark corner of C++ (a quirk) that usually only comes about through extensive experience.

Reference Style - All Levels

• The C++ Programming Language (Bjarne Stroustrup) (updated for C++11) The classic introduction to C++ by its creator. Written to parallel the classic K&R, this indeed reads very much like it and covers just about everything from the core language to the standard library, to programming paradigms to the language's philosophy. [Review] Note: All releases of the C++ standard are tracked in the question "Where do I find the current C or C++ standard documents?".

• C++ Standard Library Tutorial and Reference (Nicolai Josuttis) (updated for C++11) The introduction and reference for the C++ Standard Library. The second edition (released on April 9, 2012) covers C++11. [Review]

• The C++ IO Streams and Locales (Angelika Langer and Klaus Kreft) There's very little to say about this book except that, if you want to know anything about streams and locales, then this is the one place to find definitive answers. [Review]

C++11/14/17/… References:

• The C++11/14/17 Standard (INCITS/ISO/IEC 14882:2011/2014/2017) This, of course, is the final arbiter of all that is or isn't C++. Be aware, however, that it is intended purely as a reference for experienced users willing to devote considerable time and effort to its understanding. The C++17 standard is released in electronic form for 198 Swiss Francs.

• The C++17 standard is available, but seemingly not in an economical form – directly from the ISO it costs 198 Swiss Francs (about $200 US). For most people, the final draft before standardization is more than adequate (and free). Many will prefer an even newer draft, documenting new features that are likely to be included in C++20.

• Overview of the New C++ (C++11/14) (PDF only) (Scott Meyers) (updated for C++14) These are the presentation materials (slides and some lecture notes) of a three-day training course offered by Scott Meyers, who's a highly respected author on C++. Even though the list of items is short, the quality is high.

• The C++ Core Guidelines (C++11/14/17/…) (edited by Bjarne Stroustrup and Herb Sutter) is an evolving online document consisting of a set of guidelines for using modern C++ well. The guidelines are focused on relatively higher-level issues, such as interfaces, resource management, memory management and concurrency affecting application architecture and library design. The project was announced at CppCon'15 by Bjarne Stroustrup and others and welcomes contributions from the community. Most guidelines are supplemented with a rationale and examples as well as discussions of possible tool support. Many rules are designed specifically to be automatically checkable by static analysis tools.

• The C++ Super-FAQ (Marshall Cline, Bjarne Stroustrup and others) is an effort by the Standard C++ Foundation to unify the C++ FAQs previously maintained individually by Marshall Cline and Bjarne Stroustrup and also incorporating new contributions. The items mostly address issues at an intermediate level and are often written with a humorous tone. Not all items might be fully up to date with the latest edition of the C++ standard yet.

• cppreference.com (C++03/11/14/17/…) (initiated by Nate Kohl) is a wiki that summarizes the basic core-language features and has extensive documentation of the C++ standard library. The documentation is very precise but is easier to read than the official standard document and provides better navigation due to its wiki nature. The project documents all versions of the C++ standard and the site allows filtering the display for a specific version. The project was presented by Nate Kohl at CppCon'14.

Classics / Older

Note: Some information contained within these books may not be up-to-date or no longer considered best practice.

• The Design and Evolution of C++ (Bjarne Stroustrup) If you want to know why the language is the way it is, this book is where you find answers. This covers everything before the standardization of C++.

• Ruminations on C++ - (Andrew Koenig and Barbara Moo) [Review]

• Advanced C++ Programming Styles and Idioms (James Coplien) A predecessor of the pattern movement, it describes many C++-specific “idioms”. It's certainly a very good book and might still be worth a read if you can spare the time, but quite old and not up-to-date with current C++.

• Large Scale C++ Software Design (John Lakos) Lakos explains techniques to manage very big C++ software projects. Certainly, a good read, if it only was up to date. It was written long before C++ 98 and misses on many features (e.g. namespaces) important for large-scale projects. If you need to work in a big C++ software project, you might want to read it, although you need to take more than a grain of salt with it. The first volume of a new edition is released in 2019.

• Inside the C++ Object Model (Stanley Lippman) If you want to know how virtual member functions are commonly implemented and how base objects are commonly laid out in memory in a multi-inheritance scenario, and how all this affects performance, this is where you will find thorough discussions of such topics.

• The Annotated C++ Reference Manual (Bjarne Stroustrup, Margaret A. Ellis) This book is quite outdated in the fact that it explores the 1989 C++ 2.0 version - Templates, exceptions, namespaces and new casts were not yet introduced. Saying that however, this book goes through the entire C++ standard of the time explaining the rationale, the possible implementations, and features of the language. This is not a book to learn programming principles and patterns on C++, but to understand every aspect of the C++ language.

• Thinking in C++ (Bruce Eckel, 2nd Edition, 2000). Two volumes; is a tutorial style free set of intro level books. Downloads: vol 1, vol 2. Unfortunately they're marred by a number of trivial errors (e.g. maintaining that temporaries are automatically const), with no official errata list. A partial 3^rd party errata list is available at http://www.computersciencelab.com/Eckel.htm, but it is apparently not maintained.

• Scientific and Engineering C++: An Introduction to Advanced Techniques and Examples (John Barton and Lee Nackman) It is a comprehensive and very detailed book that tried to explain and make use of all the features available in C++, in the context of numerical methods. It introduced at the time several new techniques, such as the Curiously Recurring Template Pattern (CRTP, also called Barton-Nackman trick). It pioneered several techniques such as dimensional analysis and automatic differentiation. It came with a lot of compilable and useful code, ranging from an expression parser to a Lapack wrapper. The code is still available online. Unfortunately, the books have become somewhat outdated in the style and C++ features, however, it was an incredible tour-de-force at the time (1994, pre-STL). The chapters on dynamics inheritance are a bit complicated to understand and not very useful. An updated version of this classic book that includes move semantics and the lessons learned from the STL would be very nice.

EDIT: Below was the preferred solution in 2014. Nowadays you should use @include, as mentioned in the other answer.

In Laravel views the dot is used as folder separator. So for example I have this code

return View::make('auth.details', array('id' => $id));

which points to app/views/auth/details.blade.php

And to include a view inside a view you do like this:

file: layout.blade.php

<html>
  <html stuff>
  @yield('content')
</html>

file: hello.blade.php

@extends('layout')

@section('content')
  <html stuff>
@stop

The error occurs because the object's ID is set. Hibernate distinguishes between transient and detached objects and persist works only with transient objects. If persist concludes the object is detached (which it will because the ID is set), it will return the "detached object passed to persist" error. You can find more details here and here.

However, this only applies if you have specified the primary key to be auto-generated: if the field is configured to always be set manually, then your code works.

If you are running in a local server, such as wamp or xampp, make sure it's using the php.ini you think it is. These servers usually default to a php.ini that's not in your html docs folder.

The URL is relative to the location of the CSS file, so this should work for you:

url('../../images/image.jpg')

The relative URL goes two folders back, and then to the images folder - it should work for both cases, as long as the structure is the same.

From https://www.w3.org/TR/CSS1/#url:

Partial URLs are interpreted relative to the source of the style sheet, not relative to the document

Parsing argument based on standard input ( --key=value )

const argv = (() => {
    const arguments = {};
    process.argv.slice(2).map( (element) => {
        const matches = element.match( '--([a-zA-Z0-9]+)=(.*)');
        if ( matches ){
            arguments[matches[1]] = matches[2]
                .replace(/^['"]/, '').replace(/['"]$/, '');
        }
    });
    return arguments;
})();

Command example

node app.js --name=stackoverflow --id=10 another-argument --text="Hello World"

Result of argv: console.log(argv)

{
    name: "stackoverflow",
    id: "10",
    text: "Hello World"
}

Data Imported

[
    {
        "gameStatus": "1",
        "userId": "c02cfb18-ae66-430b-9524-67d9dd8f6a50",
        "created_at": "2018-12-20 11:32:04"
    },
    {
        "gameStatus": "0",
        "userId": "c02cfb18-ae66-430b-9524-67d9dd8f6a50",
        "created_at": "2018-12-19 18:08:24"
    },
    {
        "gameStatus": "2",
        "userId": "c02cfb18-ae66-430b-9524-67d9dd8f6a50",
        "created_at": "2018-12-19 18:35:40"
    },
    {
        "gameStatus": "0",
        "userId": "c02cfb18-ae66-430b-9524-67d9dd8f6a50",
        "created_at": "2018-12-19 10:42:53"
    },
    {
        "gameStatus": "2",
        "userId": "c02cfb18-ae66-430b-9524-67d9dd8f6a50",
        "created_at": "2018-12-20 10:54:09"
    },
    {
        "gameStatus": "0",
        "userId": "1a2fefb0-5ae2-47eb-82ff-d1b2cc27875a",
        "created_at": "2018-12-19 18:46:22"
    },
    {
        "gameStatus": "1",
        "userId": "7118ed61-d8d9-4098-a81b-484158806d21",
        "created_at": "2018-12-20 10:50:48"
    }
]

FOR Ascending order

arr.sort(function(a, b){
    var keyA = new Date(a.updated_at),
        keyB = new Date(b.updated_at);
    // Compare the 2 dates
    if(keyA < keyB) return -1;
    if(keyA > keyB) return 1;
    return 0;
});

Example for Asc Order

[
    {
        "gameStatus": "0",
        "userId": "c02cfb18-ae66-430b-9524-67d9dd8f6a50",
        "created_at": "2018-12-19 10:42:53"
    },
    {
        "gameStatus": "0",
        "userId": "c02cfb18-ae66-430b-9524-67d9dd8f6a50",
        "created_at": "2018-12-19 18:08:24"
    },
    {
        "gameStatus": "2",
        "userId": "c02cfb18-ae66-430b-9524-67d9dd8f6a50",
        "created_at": "2018-12-19 18:35:40"
    },
    {
        "gameStatus": "0",
        "userId": "1a2fefb0-5ae2-47eb-82ff-d1b2cc27875a",
        "created_at": "2018-12-19 18:46:22"
    },
    {
        "gameStatus": "1",
        "userId": "7118ed61-d8d9-4098-a81b-484158806d21",
        "created_at": "2018-12-20 10:50:48"
    },
    {
        "gameStatus": "2",
        "userId": "c02cfb18-ae66-430b-9524-67d9dd8f6a50",
        "created_at": "2018-12-20 10:54:09"
    },
    {
        "gameStatus": "1",
        "userId": "c02cfb18-ae66-430b-9524-67d9dd8f6a50",
        "created_at": "2018-12-20 11:32:04"
    }
]

FOR Descending order

arr.sort(function(a, b){
    var keyA = new Date(a.updated_at),
        keyB = new Date(b.updated_at);
    // Compare the 2 dates
    if(keyA > keyB) return -1;
    if(keyA < keyB) return 1;
    return 0;
});

Example for Desc Order

[
    {
        "gameStatus": "1",
        "userId": "c02cfb18-ae66-430b-9524-67d9dd8f6a50",
        "created_at": "2018-12-20 11:32:04"
    },
    {
        "gameStatus": "2",
        "userId": "c02cfb18-ae66-430b-9524-67d9dd8f6a50",
        "created_at": "2018-12-20 10:54:09"
    },
    {
        "gameStatus": "1",
        "userId": "7118ed61-d8d9-4098-a81b-484158806d21",
        "created_at": "2018-12-20 10:50:48"
    },
    {
        "gameStatus": "0",
        "userId": "1a2fefb0-5ae2-47eb-82ff-d1b2cc27875a",
        "created_at": "2018-12-19 18:46:22"
    },
    {
        "gameStatus": "2",
        "userId": "c02cfb18-ae66-430b-9524-67d9dd8f6a50",
        "created_at": "2018-12-19 18:35:40"
    },
    {
        "gameStatus": "0",
        "userId": "c02cfb18-ae66-430b-9524-67d9dd8f6a50",
        "created_at": "2018-12-19 18:08:24"
    },
    {
        "gameStatus": "0",
        "userId": "c02cfb18-ae66-430b-9524-67d9dd8f6a50",
        "created_at": "2018-12-19 10:42:53"
    }
]

Sometimes it's knowing what to ask. I didn't know as I am a developer who has taken on some DevOps work.

Apparently 'passwordless' or NOPASSWD login is a thing which you need to put in the /etc/sudoers file.

The answer to my question is at Ansible: best practice for maintaining list of sudoers.

The Ansible playbook code fragment looks like this from my problem:

- name: Make sure we have a 'wheel' group
  group:
    name: wheel
    state: present

- name: Allow 'wheel' group to have passwordless sudo
  lineinfile:
    dest: /etc/sudoers
    state: present
    regexp: '^%wheel'
    line: '%wheel ALL=(ALL) NOPASSWD: ALL'
    validate: 'visudo -cf %s'

- name: Add sudoers users to wheel group
  user:
    name=deployer
    groups=wheel
    append=yes
    state=present
    createhome=yes

- name: Set up authorized keys for the deployer user
  authorized_key: user=deployer key="{{item}}"
  with_file:
    - /home/railsdev/.ssh/id_rsa.pub

And the best part is that the solution is idempotent. It doesn't add the line

%wheel ALL=(ALL) NOPASSWD: ALL

to /etc/sudoers when the playbook is run a subsequent time. And yes...I was able to ssh into the server as "deployer" and run sudo commands without having to give a password.

concatenated_list = list_1 + list_2

Please read the example in rfc6749 sec 7.1 first.

The bearer token is a type of access token, which does NOT require PoP(proof-of-possession) mechanism.

PoP means kind of multi-factor authentication to make access token more secure. ref

Proof-of-Possession refers to Cryptographic methods that mitigate the risk of Security Tokens being stolen and used by an attacker. In contrast to 'Bearer Tokens', where mere possession of the Security Token allows the attacker to use it, a PoP Security Token cannot be so easily used - the attacker MUST have both the token itself and access to some key associated with the token (which is why they are sometimes referred to 'Holder-of-Key' (HoK) tokens).

Maybe it's not the case, but I would say,

• access token = payment methods
• bearer token = cash
• access token with PoP mechanism = credit card (signature or password will be verified, sometimes need to show your ID to match the name on the card)

BTW, there's a draft of "OAuth 2.0 Proof-of-Possession (PoP) Security Architecture" now.

Here is a quick way to do it in 2021 using the Anaconda Navigator. This is the most reliable way to do it, unless you want to create environments programmatically which I don't think is the case for most users:

1. Open Anaconda Navigator.
2. Click on Environments > Create and give a name to your environment. Be sure to change Python/R Kernel version if needed.

3. Go "Home" and click on "Install" under the Spyder box.

4. Click "Launch/Run"

There are still a few minor bugs when setting up your environment, most of them should be solved by restarting the Navigator.

If you find a bug, please help us posting it in the Anaconda Issues bug-tracker too! If you run into trouble creating the environment or if the environment was not correctly created you can double check what got installed: Clicking the "Environments" opens a management window showing installed packages. Search and select Spyder-related packages and then click on "Apply" to install them.

Schema is a way of categorising the objects in a database. It can be useful if you have several applications share a single database and while there is some common set of data that all application accesses.

border-collapse: separate !important; worked.

Thanks.

HTML

<table class="bordered">
    <thead>
        <tr>
            <th><label>Labels</label></th>
            <th><label>Labels</label></th>
            <th><label>Labels</label></th>
            <th><label>Labels</label></th>
            <th><label>Labels</label></th>
        </tr>
    </thead>

    <tbody>
        <tr>
            <td><label>Value</label></td>
            <td><label>Value</label></td>
            <td><label>Value</label></td>
            <td><label>Value</label></td>
            <td><label>Value</label></td>                            
        </tr>
    </tbody>                    
</table>

CSS

table {
    border-collapse: separate !important;
    border-spacing: 0;
    width: 600px;
    margin: 30px;
}
.bordered {
    border: solid #ccc 1px;
    -moz-border-radius: 6px;
    -webkit-border-radius: 6px;
    border-radius: 6px;
    -webkit-box-shadow: 0 1px 1px #ccc;
    -moz-box-shadow: 0 1px 1px #ccc;
    box-shadow: 0 1px 1px #ccc;
}
.bordered tr:hover {
    background: #ECECEC;    
    -webkit-transition: all 0.1s ease-in-out;
    -moz-transition: all 0.1s ease-in-out;
    transition: all 0.1s ease-in-out;
}
.bordered td, .bordered th {
    border-left: 1px solid #ccc;
    border-top: 1px solid #ccc;
    padding: 10px;
    text-align: left;
}
.bordered th {
    background-color: #ECECEC;
    background-image: -webkit-gradient(linear, left top, left bottom, from(#F8F8F8), to(#ECECEC));
    background-image: -webkit-linear-gradient(top, #F8F8F8, #ECECEC);
    background-image: -moz-linear-gradient(top, #F8F8F8, #ECECEC);    
    background-image: linear-gradient(top, #F8F8F8, #ECECEC);
    -webkit-box-shadow: 0 1px 0 rgba(255,255,255,.8) inset;
    -moz-box-shadow:0 1px 0 rgba(255,255,255,.8) inset;
    box-shadow: 0 1px 0 rgba(255,255,255,.8) inset;
    border-top: none;
    text-shadow: 0 1px 0 rgba(255,255,255,.5);
}
.bordered td:first-child, .bordered th:first-child {
    border-left: none;
}
.bordered th:first-child {
    -moz-border-radius: 6px 0 0 0;
    -webkit-border-radius: 6px 0 0 0;
    border-radius: 6px 0 0 0;
}
.bordered th:last-child {
    -moz-border-radius: 0 6px 0 0;
    -webkit-border-radius: 0 6px 0 0;
    border-radius: 0 6px 0 0;
}
.bordered th:only-child{
    -moz-border-radius: 6px 6px 0 0;
    -webkit-border-radius: 6px 6px 0 0;
    border-radius: 6px 6px 0 0;
}
.bordered tr:last-child td:first-child {
    -moz-border-radius: 0 0 0 6px;
    -webkit-border-radius: 0 0 0 6px;
    border-radius: 0 0 0 6px;
}
.bordered tr:last-child td:last-child {
    -moz-border-radius: 0 0 6px 0;
    -webkit-border-radius: 0 0 6px 0;
    border-radius: 0 0 6px 0;
} 

jsFiddle

You need to url-escape the ampersand. Use:

var wysiwyg_clean = wysiwyg.replace('&', '%26');

As Wolfram points out, this is nicely handled (along with all the other special characters) by encodeURIComponent.

Additional to Vasil's answer: If you have the values given as a Scala collection, you can write

val list = List(1,2,3,4,5)
val arr = Array[Int](list:_*)
println(arr.mkString)

But usually the toArray method is more handy:

val list = List(1,2,3,4,5)
val arr = list.toArray
println(arr.mkString)

composer dump-autoload
php artisan config:clear
php artisan cache:clear

This will surely work. If not then, you need to do

composer update

and then, the aforementioned commands.

Functions:

/**
 * Does something interesting
 *
 * @param Place   $where  Where something interesting takes place
 * @param integer $repeat How many times something interesting should happen
 * 
 * @throws Some_Exception_Class If something interesting cannot happen
 * @author Monkey Coder <[email protected]>
 * @return Status
 */ 

Classes:

/**
 * Short description for class
 *
 * Long description for class (if any)...
 *
 * @copyright  2006 Zend Technologies
 * @license    http://www.zend.com/license/3_0.txt   PHP License 3.0
 * @version    Release: @package_version@
 * @link       http://dev.zend.com/package/PackageName
 * @since      Class available since Release 1.2.0
 */ 

Sample File:

<?php

/**
 * Short description for file
 *
 * Long description for file (if any)...
 *
 * PHP version 5.6
 *
 * LICENSE: This source file is subject to version 3.01 of the PHP license
 * that is available through the world-wide-web at the following URI:
 * http://www.php.net/license/3_01.txt.  If you did not receive a copy of
 * the PHP License and are unable to obtain it through the web, please
 * send a note to [email protected] so we can mail you a copy immediately.
 *
 * @category   CategoryName
 * @package    PackageName
 * @author     Original Author <[email protected]>
 * @author     Another Author <[email protected]>
 * @copyright  1997-2005 The PHP Group
 * @license    http://www.php.net/license/3_01.txt  PHP License 3.01
 * @version    SVN: $Id$
 * @link       http://pear.php.net/package/PackageName
 * @see        NetOther, Net_Sample::Net_Sample()
 * @since      File available since Release 1.2.0
 * @deprecated File deprecated in Release 2.0.0
 */

/**
 * This is a "Docblock Comment," also known as a "docblock."  The class'
 * docblock, below, contains a complete description of how to write these.
 */
require_once 'PEAR.php';

// {{{ constants

/**
 * Methods return this if they succeed
 */
define('NET_SAMPLE_OK', 1);

// }}}
// {{{ GLOBALS

/**
 * The number of objects created
 * @global int $GLOBALS['_NET_SAMPLE_Count']
 */
$GLOBALS['_NET_SAMPLE_Count'] = 0;

// }}}
// {{{ Net_Sample

/**
 * An example of how to write code to PEAR's standards
 *
 * Docblock comments start with "/**" at the top.  Notice how the "/"
 * lines up with the normal indenting and the asterisks on subsequent rows
 * are in line with the first asterisk.  The last line of comment text
 * should be immediately followed on the next line by the closing asterisk
 * and slash and then the item you are commenting on should be on the next
 * line below that.  Don't add extra lines.  Please put a blank line
 * between paragraphs as well as between the end of the description and
 * the start of the @tags.  Wrap comments before 80 columns in order to
 * ease readability for a wide variety of users.
 *
 * Docblocks can only be used for programming constructs which allow them
 * (classes, properties, methods, defines, includes, globals).  See the
 * phpDocumentor documentation for more information.
 * http://phpdoc.org/tutorial_phpDocumentor.howto.pkg.html
 *
 * The Javadoc Style Guide is an excellent resource for figuring out
 * how to say what needs to be said in docblock comments.  Much of what is
 * written here is a summary of what is found there, though there are some
 * cases where what's said here overrides what is said there.
 * http://java.sun.com/j2se/javadoc/writingdoccomments/index.html#styleguide
 *
 * The first line of any docblock is the summary.  Make them one short
 * sentence, without a period at the end.  Summaries for classes, properties
 * and constants should omit the subject and simply state the object,
 * because they are describing things rather than actions or behaviors.
 *
 * Below are the tags commonly used for classes. @category through @version
 * are required.  The remainder should only be used when necessary.
 * Please use them in the order they appear here.  phpDocumentor has
 * several other tags available, feel free to use them.
 *
 * @category   CategoryName
 * @package    PackageName
 * @author     Original Author <[email protected]>
 * @author     Another Author <[email protected]>
 * @copyright  1997-2005 The PHP Group
 * @license    http://www.php.net/license/3_01.txt  PHP License 3.01
 * @version    Release: @package_version@
 * @link       http://pear.php.net/package/PackageName
 * @see        NetOther, Net_Sample::Net_Sample()
 * @since      Class available since Release 1.2.0
 * @deprecated Class deprecated in Release 2.0.0
 */
class Net_Sample
{
    // {{{ properties

    /**
     * The status of foo's universe
     * Potential values are 'good', 'fair', 'poor' and 'unknown'.
     * @var string $foo
     */
    public $foo = 'unknown';

    /**
     * The status of life
     * Note that names of private properties or methods must be
     * preceeded by an underscore.
     * @var bool $_good
     */
    private $_good = true;

    // }}}
    // {{{ setFoo()

    /**
     * Registers the status of foo's universe
     *
     * Summaries for methods should use 3rd person declarative rather
     * than 2nd person imperative, beginning with a verb phrase.
     *
     * Summaries should add description beyond the method's name. The
     * best method names are "self-documenting", meaning they tell you
     * basically what the method does.  If the summary merely repeats
     * the method name in sentence form, it is not providing more
     * information.
     *
     * Summary Examples:
     *   + Sets the label              (preferred)
     *   + Set the label               (avoid)
     *   + This method sets the label  (avoid)
     *
     * Below are the tags commonly used for methods.  A @param tag is
     * required for each parameter the method has.  The @return
     * and @access tags are mandatory.  The @throws tag is required if
     * the method uses exceptions.  @static is required if the method can
     * be called statically.  The remainder should only be used when
     * necessary.  Please use them in the order they appear here.
     * phpDocumentor has several other tags available, feel free to use
     * them.
     *
     * The @param tag contains the data type, then the parameter's
     * name, followed by a description.  By convention, the first noun in
     * the description is the data type of the parameter.  Articles like
     * "a", "an", and  "the" can precede the noun.  The descriptions
     * should start with a phrase.  If further description is necessary,
     * follow with sentences.  Having two spaces between the name and the
     * description aids readability.
     *
     * When writing a phrase, do not capitalize and do not end with a
     * period:
     *   + the string to be tested
     *
     * When writing a phrase followed by a sentence, do not capitalize the
     * phrase, but end it with a period to distinguish it from the start
     * of the next sentence:
     *   + the string to be tested. Must use UTF-8 encoding.
     *
     * Return tags should contain the data type then a description of
     * the data returned.  The data type can be any of PHP's data types
     * (int, float, bool, string, array, object, resource, mixed)
     * and should contain the type primarily returned.  For example, if
     * a method returns an object when things work correctly but false
     * when an error happens, say 'object' rather than 'mixed.'  Use
     * 'void' if nothing is returned.
     *
     * Here's an example of how to format examples:
     * <code>
     * require_once 'Net/Sample.php';
     *
     * $s = new Net_Sample();
     * if (PEAR::isError($s)) {
     *     echo $s->getMessage() . "\n";
     * }
     * </code>
     *
     * Here is an example for non-php example or sample:
     * <samp>
     * pear install net_sample
     * </samp>
     *
     * @param string $arg1 the string to quote
     * @param int    $arg2 an integer of how many problems happened.
     *                     Indent to the description's starting point
     *                     for long ones.
     *
     * @return int the integer of the set mode used. FALSE if foo
     *             foo could not be set.
     * @throws exceptionclass [description]
     *
     * @access public
     * @static
     * @see Net_Sample::$foo, Net_Other::someMethod()
     * @since Method available since Release 1.2.0
     * @deprecated Method deprecated in Release 2.0.0
     */
    function setFoo($arg1, $arg2 = 0)
    {
        /*
         * This is a "Block Comment."  The format is the same as
         * Docblock Comments except there is only one asterisk at the
         * top.  phpDocumentor doesn't parse these.
         */
        if ($arg1 == 'good' || $arg1 == 'fair') {
            $this->foo = $arg1;
            return 1;
        } elseif ($arg1 == 'poor' && $arg2 > 1) {
            $this->foo = 'poor';
            return 2;
        } else {
            return false;
        }
    }

    // }}}
}

// }}}

/*
 * Local variables:
 * tab-width: 4
 * c-basic-offset: 4
 * c-hanging-comment-ender-p: nil
 * End:
 */

?>

Source: PEAR Docblock Comment standards

In reply to @scott : Sometime JS go very fast... so...

var uniqueId = null,
    getUniqueName = function(prefix) {
        if (!uniqueId) uniqueId = (new Date()).getTime();
        return (prefix || 'id') + (uniqueId++);
    };

Linkage. Try this:

extern "C" void *print_message() {...

comboBox1.DataSource = Enum.GetValues(typeof(MyEnum));

comboBox1.SelectedIndex = (int)MyEnum.Something;

comboBox1.SelectedIndex = Convert.ToInt32(MyEnum.Something);

Both of these work for me are you sure there isn't something else wrong?

You can do:

string str = "Hello Marco !";
str = str.Substring(0, str.Length - 2);

Try with it

$color = \App\Color::take(1)->first();

Or try to check your mainActivity.xml you make sure that this one
xmlns:app="http://schemas.android.com/apk/res-auto"hereis included

You may have to use urlencode on the string 'http://google.com/?var=234&key=234'

A React Node is one of the following types:

• Boolean (which is ignored)
• null or undefined (which is ignored)
• Number
• String
• A React element (result of JSX)
• An array of any of the above, possibly a nested one

You can use the scales package just for this operation (without loading it with require or library)

scales::percent(m)

The whole reason you have a special Interface type-category in addition to abstract base classes in C#/Java is because C#/Java do not support multiple inheritance.

C++ supports multiple inheritance, and so a special type isn't needed. An abstract base class with no non-abstract (pure virtual) methods is functionally equivalent to a C#/Java interface.

If you're wondering specifically about the examples in the JUnit FAQ, such as the basic test template, I think the best practice being shown off there is that the class under test should be instantiated in your setUp method (or in a test method).

When the JUnit examples create an ArrayList in the setUp method, they all go on to test the behavior of that ArrayList, with cases like testIndexOutOfBoundException, testEmptyCollection, and the like. The perspective there is of someone writing a class and making sure it works right.

You should probably do the same when testing your own classes: create your object in setUp or in a test method, so that you'll be able to get reasonable output if you break it later.

On the other hand, if you use a Java collection class (or other library class, for that matter) in your test code, it's probably not because you want to test it--it's just part of the test fixture. In this case, you can safely assume it works as intended, so initializing it in the declaration won't be a problem.

For what it's worth, I work on a reasonably large, several-year-old, TDD-developed code base. We habitually initialize things in their declarations in test code, and in the year and a half that I've been on this project, it has never caused a problem. So there's at least some anecdotal evidence that it's a reasonable thing to do.

Use timer.scheduleAtFixedRate

public void scheduleAtFixedRate(TimerTask task,
                                long delay,
                                long period)

Schedules the specified task for repeated fixed-rate execution, beginning after the specified delay. Subsequent executions take place at approximately regular intervals, separated by the specified period.
In fixed-rate execution, each execution is scheduled relative to the scheduled execution time of the initial execution. If an execution is delayed for any reason (such as garbage collection or other background activity), two or more executions will occur in rapid succession to "catch up." In the long run, the frequency of execution will be exactly the reciprocal of the specified period (assuming the system clock underlying Object.wait(long) is accurate).

Fixed-rate execution is appropriate for recurring activities that are sensitive to absolute time, such as ringing a chime every hour on the hour, or running scheduled maintenance every day at a particular time. It is also appropriate for recurring activities where the total time to perform a fixed number of executions is important, such as a countdown timer that ticks once every second for ten seconds. Finally, fixed-rate execution is appropriate for scheduling multiple repeating timer tasks that must remain synchronized with respect to one another.

Parameters:

• task - task to be scheduled.
• delay - delay in milliseconds before task is to be executed.
• period - time in milliseconds between successive task executions.

Throws:

• IllegalArgumentException - if delay is negative, or delay + System.currentTimeMillis() is negative.
• IllegalStateException - if task was already scheduled or cancelled, timer was cancelled, or timer thread terminated.

Every object has a __dict__ variable containing all the variables and its values in it.

Try this

>>> hi_obj = hi()
>>> hi_obj.__dict__.keys()

mysql> SELECT CAST(4 AS DECIMAL(4,3));
+-------------------------+
| CAST(4 AS DECIMAL(4,3)) |
+-------------------------+
|                   4.000 |
+-------------------------+
1 row in set (0.00 sec)

mysql> SELECT CAST('4.5s' AS DECIMAL(4,3));
+------------------------------+
| CAST('4.5s' AS DECIMAL(4,3)) |
+------------------------------+
|                        4.500 |
+------------------------------+
1 row in set (0.00 sec)

mysql> SELECT CAST('a4.5s' AS DECIMAL(4,3));
+-------------------------------+
| CAST('a4.5s' AS DECIMAL(4,3)) |
+-------------------------------+
|                         0.000 |
+-------------------------------+
1 row in set, 1 warning (0.00 sec)

I usually use some #define and constants to make the calculation easy:

#define NANO_SECOND_MULTIPLIER  1000000  // 1 millisecond = 1,000,000 Nanoseconds
const long INTERVAL_MS = 500 * NANO_SECOND_MULTIPLIER;

Hence my code would look like this:

timespec sleepValue = {0};

sleepValue.tv_nsec = INTERVAL_MS;
nanosleep(&sleepValue, NULL);

You can use a CASE statement...however why don't you just create a table with an integer for ages between 0 and 150, a varchar for the written out age and then you can just join on that

Date long getTime() returns the number of milliseconds since January 1, 1970, 00:00:00 GMT represented by this Date object.

//test if date1 is before date2
if(date1.getTime() < date2.getTime()) {
....
}

Please set your form action attribute as below it will solve your problem.

<form name="addProductForm" id="addProductForm" action="javascript:;" enctype="multipart/form-data" method="post" accept-charset="utf-8">

jQuery code:

$(document).ready(function () {
    $("#addProductForm").submit(function (event) {

        //disable the default form submission
        event.preventDefault();
        //grab all form data  
        var formData = $(this).serialize();

        $.ajax({
            url: 'addProduct.php',
            type: 'POST',
            data: formData,
            async: false,
            cache: false,
            contentType: false,
            processData: false,
            success: function () {
                alert('Form Submitted!');
            },
            error: function(){
                alert("error in ajax form submission");
            }
        });

        return false;
    });
});

A little improved and wrapped into a manager solution.

Things to keep in mind. FragmentManager is not a singleton, it manages only Fragments within Activity, so in every activity it will be new. Also, this solution so far doesn't take ViewPager into account that calls setUserVisibleHint() method helping to control visiblity of Fragments.

Feel free to use following classes when dealing with this issue (uses Dagger2 injection). Call in Activity:

//inject FragmentBackstackStateManager instance to myFragmentBackstackStateManager
FragmentManager fragmentManager = getSupportFragmentManager(); 
myFragmentBackstackStateManager.apply(fragmentManager);

FragmentBackstackStateManager.java:

@Singleton
public class FragmentBackstackStateManager {

    private FragmentManager fragmentManager;

    @Inject
    public FragmentBackstackStateManager() {
    }

    private BackstackCallback backstackCallbackImpl = new BackstackCallback() {
        @Override
        public void onFragmentPushed(Fragment parentFragment) {
            parentFragment.onPause();
        }

        @Override
        public void onFragmentPopped(Fragment parentFragment) {
            parentFragment.onResume();
        }
    };

    public FragmentBackstackChangeListenerImpl getListener() {
        return new FragmentBackstackChangeListenerImpl(fragmentManager, backstackCallbackImpl);
    }

    public void apply(FragmentManager fragmentManager) {
        this.fragmentManager = fragmentManager;
        fragmentManager.addOnBackStackChangedListener(getListener());
    }
}

FragmentBackstackChangeListenerImpl.java:

public class FragmentBackstackChangeListenerImpl implements FragmentManager.OnBackStackChangedListener {

    private int lastBackStackEntryCount = 0;
    private final FragmentManager fragmentManager;
    private final BackstackCallback backstackChangeListener;

    public FragmentBackstackChangeListenerImpl(FragmentManager fragmentManager, BackstackCallback backstackChangeListener) {
        this.fragmentManager = fragmentManager;
        this.backstackChangeListener = backstackChangeListener;
        lastBackStackEntryCount = fragmentManager.getBackStackEntryCount();
    }

    private boolean wasPushed(int backStackEntryCount) {
        return lastBackStackEntryCount < backStackEntryCount;
    }

    private boolean wasPopped(int backStackEntryCount) {
        return lastBackStackEntryCount > backStackEntryCount;
    }

    private boolean haveFragments() {
        List<Fragment> fragmentList = fragmentManager.getFragments();
        return fragmentList != null && !fragmentList.isEmpty();
    }


    /**
     * If we push a fragment to backstack then parent would be the one before => size - 2
     * If we pop a fragment from backstack logically it should be the last fragment in the list, but in Android popping a fragment just makes list entry null keeping list size intact, thus it's also size - 2
     *
     * @return fragment that is parent to the one that is pushed to or popped from back stack
     */
    private Fragment getParentFragment() {
        List<Fragment> fragmentList = fragmentManager.getFragments();
        return fragmentList.get(Math.max(0, fragmentList.size() - 2));
    }

    @Override
    public void onBackStackChanged() {
        int currentBackStackEntryCount = fragmentManager.getBackStackEntryCount();
        if (haveFragments()) {
            Fragment parentFragment = getParentFragment();

            //will be null if was just popped and was last in the stack
            if (parentFragment != null) {
                if (wasPushed(currentBackStackEntryCount)) {
                    backstackChangeListener.onFragmentPushed(parentFragment);
                } else if (wasPopped(currentBackStackEntryCount)) {
                    backstackChangeListener.onFragmentPopped(parentFragment);
                }
            }
        }

        lastBackStackEntryCount = currentBackStackEntryCount;
    }
}

BackstackCallback.java:

public interface BackstackCallback {
    void onFragmentPushed(Fragment parentFragment);

    void onFragmentPopped(Fragment parentFragment);
}

We can pass string value to main method as argument without using commandline argument concept in java through Netbean

 package MainClass;
 import java.util.Scanner;
 public class CmdLineArgDemo {

static{
 Scanner readData = new Scanner(System.in);   
 System.out.println("Enter any string :");
 String str = readData.nextLine();
 String [] str1 = str.split(" ");
 // System.out.println(str1.length);
 CmdLineArgDemo.main(str1);
}  

   public static void main(String [] args){
      for(int i = 0 ; i<args.length;i++) {
        System.out.print(args[i]+" ");
      }
    }
  }

Output

Enter any string : 
Coders invent Digital World 
Coders invent Digital World

It worked for me instead using format .To work with time just use parse and toString() methods

String localTime="6:11"; LocalTime localTime = LocalTime.parse(localtime)

LocalTime lt = 6:11; localTime = lt.toString()

Here is a different method same thing but a little different

the difference is the content dot which is replaced with a \00A0 == whitespace

More on this http://www.jqui.net/tips-tricks/css-clearfix/

.clearfix:after { content: "\00A0"; display: block; clear: both; visibility: hidden; line-height: 0; height: 0;}
.clearfix{ display: inline-block;}
html[xmlns] .clearfix { display: block;}
* html .clearfix{ height: 1%;}
.clearfix {display: block}

Here is a compact version of it...

.clearfix:after { content: "\00A0"; display: block; clear: both; visibility: hidden; line-height: 0; height: 0;width:0;font-size: 0px}.clearfix{ display: inline-block;}html[xmlns] .clearfix { display: block;}* html .clearfix{ height: 1%;}.clearfix {display: block}

Call GoogleMap.setMyLocationEnabled(true) in your Activity, and add this 2 lines code in the Manifest:

<uses-permission android:name="android.permission.ACCESS_COARSE_LOCATION" />
<uses-permission android:name="android.permission.ACCESS_FINE_LOCATION" />

In case you were struggling to change linetypes, the following answer should be helpful. (This is an addition to the solution by Andy W.)

We will try to extend the learned pattern:

cols <- c("LINE1"="#f04546","LINE2"="#3591d1","BAR"="#62c76b")
line_types <- c("LINE1"=1,"LINE2"=3)
ggplot(data=data,aes(x=a)) + 
  geom_bar(stat="identity", aes(y=h,fill = "BAR"))+ #green
  geom_line(aes(y=b,group=1, colour="LINE1", linetype="LINE1"),size=0.5) +   #red
  geom_point(aes(y=b, colour="LINE1", fill="LINE1"),size=2) +           #red
  geom_line(aes(y=c,group=1,colour="LINE2", linetype="LINE2"),size=0.5) +   #blue 
  geom_point(aes(y=c,colour="LINE2", fill="LINE2"),size=2) +           #blue
  scale_colour_manual(name="Error Bars",values=cols, 
                  guide = guide_legend(override.aes=aes(fill=NA))) + 
  scale_linetype_manual(values=line_types)+
  scale_fill_manual(name="Bar",values=cols, guide="none") +
  ylab("Symptom severity") + xlab("PHQ-9 symptoms") +
  ylim(0,1.6) +
  theme_bw() +
  theme(axis.title.x = element_text(size = 15, vjust=-.2)) +
  theme(axis.title.y = element_text(size = 15, vjust=0.3))

However, what we get is the following result:

The problem is that the linetype is not merged in the main legend. Note that we did not give any name to the method scale_linetype_manual. The trick which works here is to give it the same name as what you used for naming scale_colour_manual. More specifically, if we change the corresponding line to the following we get the desired result:

scale_linetype_manual(name="Error Bars",values=line_types)

Now, it is easy to change the size of the line with the same idea.

Note that the geom_bar has not colour property anymore. (I did not try to fix this issue.) Also, adding geom_errorbar with colour attribute spoils the result. It would be great if somebody can come up with a better solution which resolves these two issues as well.

<a href="page.html" onclick="return false" style="cursor:default;">page link</a>

In case anyone else runs into this. I have a web site that was working fine on the desktop browser but I was getting 400 errors with Android devices.

It turned out to be the anti forgery token.

$.ajax({
        url: "/Cart/AddProduct/",
        data: {
            __RequestVerificationToken: $("[name='__RequestVerificationToken']").val(),
            productId: $(this).data("productcode")
        },

The problem was that the .Net controller wasn't set up correctly.

I needed to add the attributes to the controller:

    [AllowAnonymous]
    [IgnoreAntiforgeryToken]
    [DisableCors]
    [HttpPost]
    public async Task<JsonResult> AddProduct(int productId)
    {

The code needs review but for now at least I know what was causing it. 400 error not helpful at all.

Save the .py files before you build in sublime.Such as save the file on desktop or other document.

This can happen if you call

 .SingleOrDefault() 

on an IEnumerable with 2 or more elements.

The <Comment> tag contains two text nodes and two <br> nodes as children.

Your xpath expression was

//*[contains(text(),'ABC')]

To break this down,

1. * is a selector that matches any element (i.e. tag) -- it returns a node-set.
2. The [] are a conditional that operates on each individual node in that node set. It matches if any of the individual nodes it operates on match the conditions inside the brackets.
3. text() is a selector that matches all of the text nodes that are children of the context node -- it returns a node set.
4. contains is a function that operates on a string. If it is passed a node set, the node set is converted into a string by returning the string-value of the node in the node-set that is first in document order. Hence, it can match only the first text node in your <Comment> element -- namely BLAH BLAH BLAH. Since that doesn't match, you don't get a <Comment> in your results.

You need to change this to

//*[text()[contains(.,'ABC')]]

1. * is a selector that matches any element (i.e. tag) -- it returns a node-set.
2. The outer [] are a conditional that operates on each individual node in that node set -- here it operates on each element in the document.
3. text() is a selector that matches all of the text nodes that are children of the context node -- it returns a node set.
4. The inner [] are a conditional that operates on each node in that node set -- here each individual text node. Each individual text node is the starting point for any path in the brackets, and can also be referred to explicitly as . within the brackets. It matches if any of the individual nodes it operates on match the conditions inside the brackets.
5. contains is a function that operates on a string. Here it is passed an individual text node (.). Since it is passed the second text node in the <Comment> tag individually, it will see the 'ABC' string and be able to match it.

You can access columns by index, by name and some other ways:

dtResult.Rows(i)("columnName") = strVerse

You should probably make sure your DataTable has some columns first...

I solved this issue finally, it was because of some systems like skype and system processes take that port 80, you can make check using netstat -ao for port 80

Kindly find the following steps

1. After installing your Apache HTTP go to the bin folder using cmd

2. Install it as a service using httpd.exe -k install even when you see the error never mind

3. Now make sure the service is installed (even if not started) according to your os

4. Restart the system, then you will find the Apache service will be the first one to take the 80 port,

Congratulations the issue is solved.

A fast way of doing this is to reconstruct using numpy to slice the underlying arrays. See timings below.

mask = s.values != 1
pd.Series(s.values[mask], s.index[mask])

0
383    3.000000
737    9.000000
833    8.166667
dtype: float64

naive timing

Note: Use CSS counters to create nested numbering in a modern browser. See the accepted answer. The following is for historical interest only.

If the browser supports content and counter,

.foo {_x000D_
  counter-reset: foo;_x000D_
}_x000D_
.foo li {_x000D_
  list-style-type: none;_x000D_
}_x000D_
.foo li::before {_x000D_
  counter-increment: foo;_x000D_
  content: "1." counter(foo) " ";_x000D_
}

<ol class="foo">_x000D_
  <li>uno</li>_x000D_
  <li>dos</li>_x000D_
  <li>tres</li>_x000D_
  <li>cuatro</li>_x000D_
</ol>

I think you want this:

select *
from dbo.table
where DATALENGTH(column_name) = 3

Set AUTO_INCREMENT to PRIMARY KEY

C is meant to be a step above assembly language. The C if-statement is really just syntactical sugar for "branch-if-zero", so the idea of booleans as an independent datatype was a foreign concept at the time. (1)

Even now, C/C++ booleans are usually little more than an alias for a single byte data type. As such, it's really more of a purposing label than an independent datatype.

(1) Of course, modern compilers are a bit more advanced in their handling of if statements. This is from the standpoint of C as a new language.

android:fitsSystemWindows="true" only work on v21. We can set it in theme xml or in parent layout like LinearLayout or in CoordinateLayout . For below v21, We could not add this flag. Please create different values folder with different style.xml file as per your need.

I follow Kelsey's first set of steps to add the installer classes to my service project, but instead of creating an MSI or setup.exe installer I make the service self installing/uninstalling. Here's a bit of sample code from one of my services you can use as a starting point.

public static int Main(string[] args)
{
    if (System.Environment.UserInteractive)
    {
        // we only care about the first two characters
        string arg = args[0].ToLowerInvariant().Substring(0, 2);

        switch (arg)
        {
            case "/i":  // install
                return InstallService();

            case "/u":  // uninstall
                return UninstallService();

            default:  // unknown option
                Console.WriteLine("Argument not recognized: {0}", args[0]);
                Console.WriteLine(string.Empty);
                DisplayUsage();
                return 1;
        }
    }
    else
    {
        // run as a standard service as we weren't started by a user
        ServiceBase.Run(new CSMessageQueueService());
    }

    return 0;
}

private static int InstallService()
{
    var service = new MyService();

    try
    {
        // perform specific install steps for our queue service.
        service.InstallService();

        // install the service with the Windows Service Control Manager (SCM)
        ManagedInstallerClass.InstallHelper(new string[] { Assembly.GetExecutingAssembly().Location });
    }
    catch (Exception ex)
    {
        if (ex.InnerException != null && ex.InnerException.GetType() == typeof(Win32Exception))
        {
            Win32Exception wex = (Win32Exception)ex.InnerException;
            Console.WriteLine("Error(0x{0:X}): Service already installed!", wex.ErrorCode);
            return wex.ErrorCode;
        }
        else
        {
            Console.WriteLine(ex.ToString());
            return -1;
        }
    }

    return 0;
}

private static int UninstallService()
{
    var service = new MyQueueService();

    try
    {
        // perform specific uninstall steps for our queue service
        service.UninstallService();

        // uninstall the service from the Windows Service Control Manager (SCM)
        ManagedInstallerClass.InstallHelper(new string[] { "/u", Assembly.GetExecutingAssembly().Location });
    }
    catch (Exception ex)
    {
        if (ex.InnerException.GetType() == typeof(Win32Exception))
        {
            Win32Exception wex = (Win32Exception)ex.InnerException;
            Console.WriteLine("Error(0x{0:X}): Service not installed!", wex.ErrorCode);
            return wex.ErrorCode;
        }
        else
        {
            Console.WriteLine(ex.ToString());
            return -1;
        }
    }

    return 0;
}

40 methods in a single class is a bit much.

Would it make sense to move some of the functionality into other - suitably named - classes. Then it is much easier to make sense of.

When you have fewer, it is much easier to list them in a natural reading order. A frequent paradigm is to list things either before or after you need them , in the order you need them.

This usually means that main() goes on top or on bottom.

borrowed this shamely from here

Process process = new ProcessBuilder("C:\\PathToExe\\MyExe.exe","param1","param2").start();
InputStream is = process.getInputStream();
InputStreamReader isr = new InputStreamReader(is);
BufferedReader br = new BufferedReader(isr);
String line;

System.out.printf("Output of running %s is:", Arrays.toString(args));

while ((line = br.readLine()) != null) {
  System.out.println(line);
}

More information here

Other issues on how to pass commands here and here

Even in base Python you can do the computation in generic form

result = sum(x**2 for x in some_vector) ** 0.5

x ** 2 is surely not an hack and the computation performed is the same (I checked with cpython source code). I actually find it more readable (and readability counts).

Using instead x ** 0.5 to take the square root doesn't do the exact same computations as math.sqrt as the former (probably) is computed using logarithms and the latter (probably) using the specific numeric instruction of the math processor.

I often use x ** 0.5 simply because I don't want to add math just for that. I'd expect however a specific instruction for the square root to work better (more accurately) than a multi-step operation with logarithms.

I don't understand how can datenwolf`s index generation can be correct. But still I find his solution rather clear. This is what I get after some thinking:

inline void push_indices(vector<GLushort>& indices, int sectors, int r, int s) {
    int curRow = r * sectors;
    int nextRow = (r+1) * sectors;

    indices.push_back(curRow + s);
    indices.push_back(nextRow + s);
    indices.push_back(nextRow + (s+1));

    indices.push_back(curRow + s);
    indices.push_back(nextRow + (s+1));
    indices.push_back(curRow + (s+1));
}

void createSphere(vector<vec3>& vertices, vector<GLushort>& indices, vector<vec2>& texcoords,
             float radius, unsigned int rings, unsigned int sectors)
{
    float const R = 1./(float)(rings-1);
    float const S = 1./(float)(sectors-1);

    for(int r = 0; r < rings; ++r) {
        for(int s = 0; s < sectors; ++s) {
            float const y = sin( -M_PI_2 + M_PI * r * R );
            float const x = cos(2*M_PI * s * S) * sin( M_PI * r * R );
            float const z = sin(2*M_PI * s * S) * sin( M_PI * r * R );

            texcoords.push_back(vec2(s*S, r*R));
            vertices.push_back(vec3(x,y,z) * radius);
            push_indices(indices, sectors, r, s);
        }
    }
}

XAMPP Apache + MariaDB + PHP + Perl (X -any OS)

• After successful installation execute xampp-control.exe in XAMPP folder

• Start Apache and MySQL

• Open browser and in url type localhost or 127.0.0.1

• then you are welcomed with dashboard

By default your port is listing with 80.If you want you can change it to your desired port number in httpd.conf file.(If port 80 is already using with other app then you have to change it).

For example you changed port number 80 to 8090 then you can run as 'localhost:8090' or '127.0.0.1:8090'

Well, quick answer would to take a look at the 'scp' manpage, or perhaps rsync - depending exactly on what you need to copy. If you had to, you could even do tar-over-ssh:

tar cvf - | ssh server tar xf -

Here is your solution for the problem,

$letter = array();
for ($i = 'A'; $i !== 'ZZ'; $i++){
        if(ord($i) % 2 != 0)
           $letter[] .= $i;
}
print_r($letter);

You need to get the ASCII value for that character which will solve your problem.

Here is ord doc and working code.

For your requirement, you can do like this,

for ($i = 'A'; $i !== 'ZZ'; ord($i)+$x){
  $letter[] .= $i;
}
print_r($letter);

Here set $x as per your requirement.

Putting plot.tight_layout() after all changes on the graph, just before show() or savefig() will solve the problem.

The X-Frame-Options is defined in the Http Header and not in the <head> section of the page you want to use in the iframe.

Accepted values are: DENY, SAMEORIGIN and ALLOW-FROM "url"

Another vi command that'll do: :%s/.$// This removes the last character of each line in the file. The drawback to this search and replace command is that it doesn't care what the last character is, so be careful not to call it twice.

Your query ($myQuery) is failing and therefore not producing a query resource, but instead producing FALSE.

To reveal what your dynamically generated query looks like and reveal the errors, try this:

$result2 = mysql_query($myQuery) or die($myQuery."<br/><br/>".mysql_error());

The error message will guide you to the solution, which from your comment below is related to using ORDER BY on a field that doesn't exist in the table you're SELECTing from.

Here's a simple pure JavaScript solution that works for a target Number (value for scrollTop), target DOM element, or some special String cases:

/**
 * target - target to scroll to (DOM element, scrollTop Number, 'top', or 'bottom'
 * containerEl - DOM element for the container with scrollbars
 */
var scrollToTarget = function(target, containerEl) {
    // Moved up here for readability:
    var isElement = target && target.nodeType === 1,
        isNumber = Object.prototype.toString.call(target) === '[object Number]';

    if (isElement) {
        containerEl.scrollTop = target.offsetTop;
    } else if (isNumber) {
        containerEl.scrollTop = target;
    } else if (target === 'bottom') {
        containerEl.scrollTop = containerEl.scrollHeight - containerEl.offsetHeight;
    } else if (target === 'top') {
        containerEl.scrollTop = 0;
    }
};

And here are some examples of usage:

// Scroll to the top
var scrollableDiv = document.getElementById('scrollable_div');
scrollToTarget('top', scrollableDiv);

or

// Scroll to 200px from the top
var scrollableDiv = document.getElementById('scrollable_div');
scrollToTarget(200, scrollableDiv);

or

// Scroll to targetElement
var scrollableDiv = document.getElementById('scrollable_div');
var targetElement= document.getElementById('target_element');
scrollToTarget(targetElement, scrollableDiv);

I use these:

.right {display:table; margin:-18px 0 0 auto;}
.center {display:table; margin:-18px auto 0 auto;}

The best way to do this is with boolean masking:

In [56]: df
Out[56]:
     line_date  daysago  line_race  rating    raw  wrating
0   2007-03-31       62         11      56  1.000   56.000
1   2007-03-10       83         11      67  1.000   67.000
2   2007-02-10      111          9      66  1.000   66.000
3   2007-01-13      139         10      83  0.881   73.096
4   2006-12-23      160         10      88  0.793   69.787
5   2006-11-09      204          9      52  0.637   33.106
6   2006-10-22      222          8      66  0.582   38.408
7   2006-09-29      245          9      70  0.519   36.318
8   2006-09-16      258         11      68  0.486   33.063
9   2006-08-30      275          8      72  0.447   32.160
10  2006-02-11      475          5      65  0.165   10.698
11  2006-01-13      504          0      70  0.142    9.969
12  2006-01-02      515          0      64  0.135    8.627
13  2005-12-06      542          0      70  0.118    8.246
14  2005-11-29      549          0      70  0.114    7.963
15  2005-11-22      556          0      -1  0.110   -0.110
16  2005-11-01      577          0      -1  0.099   -0.099
17  2005-10-20      589          0      -1  0.093   -0.093
18  2005-09-27      612          0      -1  0.083   -0.083
19  2005-09-07      632          0      -1  0.075   -0.075
20  2005-06-12      719          0      69  0.049    3.360
21  2005-05-29      733          0      -1  0.045   -0.045
22  2005-05-02      760          0      -1  0.040   -0.040
23  2005-04-02      790          0      -1  0.034   -0.034
24  2005-03-13      810          0      -1  0.031   -0.031
25  2004-11-09      934          0      -1  0.017   -0.017

In [57]: df[df.line_race != 0]
Out[57]:
     line_date  daysago  line_race  rating    raw  wrating
0   2007-03-31       62         11      56  1.000   56.000
1   2007-03-10       83         11      67  1.000   67.000
2   2007-02-10      111          9      66  1.000   66.000
3   2007-01-13      139         10      83  0.881   73.096
4   2006-12-23      160         10      88  0.793   69.787
5   2006-11-09      204          9      52  0.637   33.106
6   2006-10-22      222          8      66  0.582   38.408
7   2006-09-29      245          9      70  0.519   36.318
8   2006-09-16      258         11      68  0.486   33.063
9   2006-08-30      275          8      72  0.447   32.160
10  2006-02-11      475          5      65  0.165   10.698

UPDATE: Now that pandas 0.13 is out, another way to do this is df.query('line_race != 0').

Really fast, really easy:

srand(time(NULL)); // Seed the time
int finalNum = rand()%(max-min+1)+min; // Generate the number, assign to variable.

And that is it. However, this is biased towards the lower end, but if you are using C++ TR1/C++11 you can do it using the random header to avoid that bias like so:

#include <random>

std::mt19937 rng(seed);
std::uniform_int_distribution<int> gen(min, max); // uniform, unbiased

int r = gen(rng);

But you can also remove the bias in normal C++ like this:

int rangeRandomAlg2 (int min, int max){
    int n = max - min + 1;
    int remainder = RAND_MAX % n;
    int x;
    do{
        x = rand();
    }while (x >= RAND_MAX - remainder);
    return min + x % n;
}

and that was gotten from this post.

It's explained in great detail in the docs, but I'll try to summarize:

• matching means git push will push all your local branches to the ones with the same name on the remote. This makes it easy to accidentally push a branch you didn't intend to.

• simple means git push will push only the current branch to the one that git pull would pull from, and also checks that their names match. This is a more intuitive behavior, which is why the default is getting changed to this.

This setting only affects the behavior of your local client, and can be overridden by explicitly specifying which branches you want to push on the command line. Other clients can have different settings, it only affects what happens when you don't specify which branches you want to push.

Solved 2019 - Hover on Touch

It now seems best to avoid using hover altogether with ios or touch in general. The below code applies your css as long as touch is maintained, and without other ios flyouts. Do this;

1. Jquery add: $("p").on("touchstart", function(e) { $(this).focus(); e.preventDefault(); });

2. CSS: replace p:hover with p:focus, and add p:active

Options;

• replace jquery p selector with any class etc

• to have the effect remain, keep p:hover as well, and add body{cursor:ponter;} so a tap anywhere ends it

• try click & mouseover events as well as touchstart in same code (but not tested)

• remove e.preventDefault(); to enable users to utilise ios flyouts eg copy

Notes

• only tested for text elements, ios may treat inputs etc differently

• only tested on iphone XR ios 12.1.12, and ipad 3 ios 9.3.5, using Safari or Chrome.

use substring function:

yourString.Substring(0, length);

The line that starts or ends the here-doc probably has some non-printable or whitespace characters (for example, carriage return) which means that the second "EOF" does not match the first, and doesn't end the here-doc like it should. This is a very common error, and difficult to detect with just a text editor. You can make non-printable characters visible for example with cat:

cat -A myfile.sh

Once you see the output from cat -A the solution will be obvious: remove the offending characters.

You can add additional check based on cell tower triangulation or Wifi Access Points info using Google Maps Geolocation API

The simplest way to get info about CellTowers

final TelephonyManager telephonyManager = (TelephonyManager) appContext.getSystemService(Context.TELEPHONY_SERVICE);
String networkOperator = telephonyManager.getNetworkOperator();
int mcc = Integer.parseInt(networkOperator.substring(0, 3));
int mnc = Integer.parseInt(networkOperator.substring(3));
String operatorName = telephonyManager.getNetworkOperatorName();
final GsmCellLocation cellLocation = (GsmCellLocation) telephonyManager.getCellLocation();
int cid = cellLocation.getCid();
int lac = cellLocation.getLac();

You can compare your results with site

To get info about Wifi Access Points

final WifiManager mWifiManager = (WifiManager) appContext.getApplicationContext().getSystemService(Context.WIFI_SERVICE);

if (mWifiManager != null && mWifiManager.getWifiState() == WifiManager.WIFI_STATE_ENABLED) {

    // register WiFi scan results receiver
    IntentFilter filter = new IntentFilter();
    filter.addAction(WifiManager.SCAN_RESULTS_AVAILABLE_ACTION);

    BroadcastReceiver broadcastReceiver = new BroadcastReceiver() {
            @Override
            public void onReceive(Context context, Intent intent) {
                List<ScanResult> results = mWifiManager.getScanResults();//<-result list
            }
        };

        appContext.registerReceiver(broadcastReceiver, filter);

        // start WiFi Scan
        mWifiManager.startScan();
}

Most of the answers here are more or less related to application programming. Here is an example from embedded systems programming. For example below is an excerpt from the reference manual of NXP's Kinetis KL13 series microcontroller, this code snippet is used to run bootloader, which resides in ROM, from firmware:

" To get the address of the entry point, the user application reads the word containing the pointer to the bootloader API tree at offset 0x1C of the bootloader's vector table. The vector table is placed at the base of the bootloader's address range, which for the ROM is 0x1C00_0000. Thus, the API tree pointer is at address 0x1C00_001C.

The bootloader API tree is a structure that contains pointers to other structures, which have the function and data addresses for the bootloader. The bootloader entry point is always the first word of the API tree. "

uint32_t runBootloaderAddress;
void (*runBootloader)(void * arg);
// Read the function address from the ROM API tree.
runBootloaderAddress = **(uint32_t **)(0x1c00001c);
runBootloader = (void (*)(void * arg))runBootloaderAddress;
// Start the bootloader.
runBootloader(NULL);

Configuration config = System.Web.Configuration.WebConfigurationManager.OpenWebConfiguration("~");
ConnectionStringsSection section = config.GetSection("connectionStrings") as ConnectionStringsSection;
//section.SectionInformation.UnprotectSection();
section.SectionInformation.ProtectSection("DataProtectionConfigurationProvider");
config.Save();

sudo nano /etc/nginx/nginx.conf

Then add a line in the http section

http {
    client_max_body_size 100M;
}

don't use MB only M.

systemctl restart nginx

then for php location

sudo gedit /etc/php5/fpm/php.ini

for nowdays maximum use php 7.0 or higher

sudo nano /etc/php/7.2/fpm/php.ini     //7.3,7.2 or 7.1 which php you use

check those increasing by your desire .

memory_limit = 128M 
post_max_size = 20M  
upload_max_filesize = 10M

restart php-fpm

service php-fpm restart 

You need to inherit from the base class.

Go to installed updates and just uninstall Internet Explorer 11 Windows update. It works for me.

For current window, you can use this:

var hash = window.location.hash.substr(1);

To get the hash value of the main window, use this:

var hash = window.top.location.hash.substr(1);

If you have a string with an URL/hash, the easiest method is:

var url = 'https://www.stackoverflow.com/questions/123/abc#10076097';
var hash = url.split('#').pop();

If you're using jQuery, use this:

var hash = $(location).attr('hash');

git checkout -b branch/name

git pull origin branch/name

I use this helper method to render components and return an component instance. Methods can be called on that instance.

static async renderComponentAt(componentClass, props, parentElementId){
         let componentId = props.id;
        if(!componentId){
            throw Error('Component has no id property. Please include id:"...xyz..." to component properties.');
        }

        let parentElement = document.getElementById(parentElementId);

        return await new Promise((resolve, reject) => {
            props.ref = (component)=>{
                resolve(component);
            };
            let element = React.createElement(componentClass, props, null);
            ReactDOM.render(element, parentElement);
        });
    }

maybe this is what u want?

<a href="#" id="bottle" onclick="document.location=this.id+'.html';return false;" >
    <img src="../images/bottle.jpg" alt="bottle" class="thumbnails" />
</a>

edit: keep in mind that anyone who does not have javascript enabled will not be able to navaigate to the image page....

The other response shows this, but essentially you just need to create a SqlParameter, set the Direction to Output, and add it to the SqlCommand's Parameters collection. Then execute the stored procedure and get the value of the parameter.

Using your code sample:

// SqlConnection and SqlCommand are IDisposable, so stack a couple using()'s
using (SqlConnection conn = new SqlConnection(connectionString))
using (SqlCommand cmd = new SqlCommand("sproc", conn))
{
   // Create parameter with Direction as Output (and correct name and type)
   SqlParameter outputIdParam = new SqlParameter("@ID", SqlDbType.Int)
   { 
      Direction = ParameterDirection.Output 
   };

   cmd.CommandType = CommandType.StoredProcedure;
   cmd.Parameters.Add(outputIdParam);

   conn.Open();
   cmd.ExecuteNonQuery();

   // Some various ways to grab the output depending on how you would like to
   // handle a null value returned from the query (shown in comment for each).

   // Note: You can use either the SqlParameter variable declared
   // above or access it through the Parameters collection by name:
   //   outputIdParam.Value == cmd.Parameters["@ID"].Value

   // Throws FormatException
   int idFromString = int.Parse(outputIdParam.Value.ToString());

   // Throws InvalidCastException
   int idFromCast = (int)outputIdParam.Value; 

   // idAsNullableInt remains null
   int? idAsNullableInt = outputIdParam.Value as int?; 

   // idOrDefaultValue is 0 (or any other value specified to the ?? operator)
   int idOrDefaultValue = outputIdParam.Value as int? ?? default(int); 

   conn.Close();
}

Be careful when getting the Parameters[].Value, since the type needs to be cast from object to what you're declaring it as. And the SqlDbType used when you create the SqlParameter needs to match the type in the database. If you're going to just output it to the console, you may just be using Parameters["@Param"].Value.ToString() (either explictly or implicitly via a Console.Write() or String.Format() call).

EDIT: Over 3.5 years and almost 20k views and nobody had bothered to mention that it didn't even compile for the reason specified in my "be careful" comment in the original post. Nice. Fixed it based on good comments from @Walter Stabosz and @Stephen Kennedy and to match the update code edit in the question from @abatishchev.

The simplest way is to read a character, and print it right after reading:

int c;
FILE *file;
file = fopen("test.txt", "r");
if (file) {
    while ((c = getc(file)) != EOF)
        putchar(c);
    fclose(file);
}

c is int above, since EOF is a negative number, and a plain char may be unsigned.

If you want to read the file in chunks, but without dynamic memory allocation, you can do:

#define CHUNK 1024 /* read 1024 bytes at a time */
char buf[CHUNK];
FILE *file;
size_t nread;

file = fopen("test.txt", "r");
if (file) {
    while ((nread = fread(buf, 1, sizeof buf, file)) > 0)
        fwrite(buf, 1, nread, stdout);
    if (ferror(file)) {
        /* deal with error */
    }
    fclose(file);
}

The second method above is essentially how you will read a file with a dynamically allocated array:

char *buf = malloc(chunk);

if (buf == NULL) {
    /* deal with malloc() failure */
}

/* otherwise do this.  Note 'chunk' instead of 'sizeof buf' */
while ((nread = fread(buf, 1, chunk, file)) > 0) {
    /* as above */
}

Your method of fscanf() with %s as format loses information about whitespace in the file, so it is not exactly copying a file to stdout.

urllib went through some changes in Python3 and can now be imported from the parse submodule

>>> from urllib.parse import quote  
>>> quote('"')                      
'%22'                               

Flurl [disclosure: I'm the author] supports building query strings via anonymous objects (among other ways):

var url = "http://www.some-api.com".SetQueryParams(new
{
    api_key = ConfigurationManager.AppSettings["SomeApiKey"],
    max_results = 20,
    q = "Don't worry, I'll get encoded!"
});

The optional Flurl.Http companion lib allows you to do HTTP calls right off the same fluent call chain, extending it into a full-blown REST client:

T result = await "https://api.mysite.com"
    .AppendPathSegment("person")
    .SetQueryParams(new { ap_key = "my-key" })
    .WithOAuthBearerToken("MyToken")
    .PostJsonAsync(new { first_name = firstName, last_name = lastName })
    .ReceiveJson<T>();

The full package is available on NuGet:

PM> Install-Package Flurl.Http

or just the stand-alone URL builder:

PM> Install-Package Flurl

I agree with the answer from Chris, but seeing this is a specific ASP.NET MVC question it would be better to use either Razor syntax:

<link rel="icon" href="@Url.Content("~/content/favicon.ico")"/>

Or traditionally

<link rel="icon" href="<%= Url.Content("~/content/favicon.ico") %>"/>

rather than

<link rel="icon" href="http://www.mydomain.com/content/favicon.ico"/>

This should do it

old_string = "this is going to have a full stop. some written sstuff!"
k = old_string.rfind(".")
new_string = old_string[:k] + ". - " + old_string[k+1:]

Split the strings and then use chain.from_iterable to combine them into a single list

>>> import itertools
>>> l = ['Facebook;Google+;MySpace', 'Apple;Android']
>>> l1 = [ x for x in itertools.chain.from_iterable( x.split(';') for x in l ) ]
>>> l1
['Facebook', 'Google+', 'MySpace', 'Apple', 'Android']

When i use these solution this error coming:

java -jar xxxxx.jar

no main manifest attribute, in xxxxx.jar

and solution is:

You have to change manifest directory:

<project folder>\src\main\java 

change java to resources

<project folder>\src\main\resources

For Laravel 5 I normally use:

<a href="{{ url('/path/uri') }}">Link Text</a>

I'm of the understanding that using the url() function is calling the same Facade as URL::to()

In my case I was missing the curly braces. I had @Value("foo.bar") String value instead of the correct form @Value("${foo.bar}") String value

Use 2 quotes:

"Samsung U600 24"""

First zip or gzip the folders:
Use the following command:

zip -r NameYouWantForZipFile.zip foldertozip/

or

tar -pvczf BackUpDirectory.tar.gz /path/to/directory

for gzip compression use SCP:

scp [email protected]:~/serverpath/public_html ~/Desktop

I've received this error from referencing services located on a WCFHost from my web tier. What worked for me may not apply to everyone, but I'm leaving this answer for those whom it may. The port number for my WCFHost was randomly updated by IIS, I simply had to update the end routes to the svc references in my web config. Problem solved.

422 Unprocessable Entity Explained Updated: March 6, 2017

What Is 422 Unprocessable Entity?

A 422 status code occurs when a request is well-formed, however, due to semantic errors it is unable to be processed. This HTTP status was introduced in RFC 4918 and is more specifically geared toward HTTP extensions for Web Distributed Authoring and Versioning (WebDAV).

There is some controversy out there on whether or not developers should return a 400 vs 422 error to clients (more on the differences between both statuses below). However, in most cases, it is agreed upon that the 422 status should only be returned if you support WebDAV capabilities.

A word-for-word definition of the 422 status code taken from section 11.2 in RFC 4918 can be read below.

The 422 (Unprocessable Entity) status code means the server understands the content type of the request entity (hence a 415(Unsupported Media Type) status code is inappropriate), and the syntax of the request entity is correct (thus a 400 (Bad Request) status code is inappropriate) but was unable to process the contained instructions.

The definition goes on to say:

For example, this error condition may occur if an XML request body contains well-formed (i.e., syntactically correct), but semantically erroneous, XML instructions.

400 vs 422 Status Codes

Bad request errors make use of the 400 status code and should be returned to the client if the request syntax is malformed, contains invalid request message framing, or has deceptive request routing. This status code may seem pretty similar to the 422 unprocessable entity status, however, one small piece of information that distinguishes them is the fact that the syntax of a request entity for a 422 error is correct whereas the syntax of a request that generates a 400 error is incorrect.

The use of the 422 status should be reserved only for very particular use-cases. In most other cases where a client error has occurred due to malformed syntax, the 400 Bad Request status should be used.

https://www.keycdn.com/support/422-unprocessable-entity/

1. set the classpath and compile

   javac -classpath "C:\Program Files\Java\jdk1.6.0_updateVersion\tools.jar" yourApp.java

2. create manifest.txt

   Main-Class: yourApp newline

3. create yourApp.jar

   jar cvf0m yourApp.jar manifest.txt yourApp.class

4. run yourApp.jar

   java -jar yourApp.jar

Ok the first issue with the div tag was easy enough: I just added a style="display:none;" to it and then before showing the dialog I added this in my dialog script:

$("#dialog").css("display", "inherit");

But for the post version I'm still out of luck.

0xe0434352 is the SEH code for a CLR exception. If you don't understand what that means, stop and read A Crash Course on the Depths of Win32™ Structured Exception Handling. So your process is not handling a CLR exception. Don't shoot the messenger, KERNELBASE.DLL is just the unfortunate victim. The perpetrator is MyApp.exe.

There should be a minidump of the crash in DrWatson folders with a full stack, it will contain everything you need to root cause the issue.

I suggest you wire up, in your myapp.exe code, AppDomain.UnhandledException and Application.ThreadException, as appropriate.

Another alternative to System.arraycopy:

String[] stringArray = Arrays.copyOf(objectArray, objectArray.length, String[].class);

Checkout zirafa/bootstrap-grid-only. It contains only the bootstrap grid and responsive utilities that you need (no reset or anything), and simplifies the complexity of working directly with the LESS files.

Give the optional argument a default value.

function date ($format, $timestamp='') {
}

If you want to create a garage and fill it up with new cars that can be accessed later, use this code:

for (int i = 0; i < garage.length; i++)
     garage[i] = new Car("argument");

Also, the cars are later accessed using:

garage[0];
garage[1];
garage[2];
etc.

The answer by @sbk is the way we should do it in spring-boot environment (apart from @Value("${classpath*:})), in my opinion. But in my scenario it was not working if the execute from standalone jar..may be I did something wrong.

But this can be another way of doing this,

InputStream is = this.getClass().getClassLoader().getResourceAsStream(<relative path of the resource from resource directory>);

Use explicit injection. No other approach will allow you for instance to run tests in parallel in the same JVM.

Patterns that use anything classloader wide like static log binder or messing with environmental thinks like logback.XML are bust when it comes to testing.

Consider the parallelized tests I mention , or consider the case where you want to intercept logging of component A whose construction is hidden behind api B. This latter case is easy to deal with if you are using a dependency injected loggerfactory from the top, but not if you inject Logger as there no seam in this assembly at ILoggerFactory.getLogger.

And its not all about unit testing either. Sometimes we want integration tests to emit logging. Sometimes we don't. Someone's we want some of the integration testing logging to be selectively suppressed, eg for expected errors that would otherwise clutter the CI console and confuse. All easy if you inject ILoggerFactory from the top of your mainline (or whatever di framework you might use)

So...

Either inject a reporter as suggested or adopt a pattern of injecting the ILoggerFactory. By explicit ILoggerFactory injection rather than Logger you can support many access/intercept patterns and parallelization.

While it seems the question was answered per the OP's request, none of the answers give a good way to get a datetime.date object instead of a datetime.datetime. So for those searching and finding this thread:

datetime.date has no .strptime method; use the one on datetime.datetime instead and then call .date() on it to receive the datetime.date object.

Like so:

>>> from datetime import datetime
>>> datetime.strptime('2014-12-04', '%Y-%m-%d').date()
datetime.date(2014, 12, 4)

Say you want to Zip all the folders(sub directories) in the current directory.

for root, dirs, files in os.walk("."):
    for sub_dir in dirs:
        zip_you_want = sub_dir+".zip"
        zip_process = zipfile.ZipFile(zip_you_want, "w", zipfile.ZIP_DEFLATED)
        zip_process.write(file_you_want_to_include)
        zip_process.close()

        print("Successfully zipped directory: {sub_dir}".format(sub_dir=sub_dir))

In contrast to SGB's answer, I prefer doing the regexp defining the actual format of my data and negating that. This allows me to define values like $DDD,DDD,DDD.DD In the OPs simple scenario, it would look like

SELECT * 
FROM table_with_column_to_search 
WHERE NOT REGEXP_LIKE(varchar_col_with_non_numerics, '^[0-9]+$');

which finds all non-positive integers. If you wau accept negatiuve integers also, it's an easy change, just add an optional leading minus.

SELECT * 
FROM table_with_column_to_search 
WHERE NOT REGEXP_LIKE(varchar_col_with_non_numerics, '^-?[0-9]+$');

accepting floating points...

SELECT * 
FROM table_with_column_to_search 
WHERE NOT REGEXP_LIKE(varchar_col_with_non_numerics, '^-?[0-9]+(\.[0-9]+)?$');

Same goes further with any format. Basically, you will generally already have the formats to validate input data, so when you will desire to find data that does not match that format ... it's simpler to negate that format than come up with another one; which in case of SGB's approach would be a bit tricky to do if you want more than just positive integers.

Given this is such a common issue, geronto-posting:

    if(UNIX AND NOT APPLE)
        set(LINUX TRUE)
    endif()

    # if(NOT LINUX) should work, too, if you need that
    if(LINUX) 
        message(STATUS ">>> Linux")
        # linux stuff here
    else()
        message(STATUS ">>> Not Linux")
        # stuff that should happen not on Linux 
    endif()

CMake boolean logic docs

CMake platform names, etc.