ANDROID_HOME, which also points to the SDK installation directory, is deprecated. If you continue to use it, the following rules apply: If ANDROID_HOME is defined and contains a valid SDK installation, its value is used instead of the value in ANDROID_SDK_ROOT. If ANDROID_HOME is not defined, the value in ANDROID_SDK_ROOT is used. If ANDROID_HOME is defined but does not exist or does not contain a valid SDK installation, the value in ANDROID_SDK_ROOT is used instead.

There was another question that was closed as being a duplicate of this one, but if you read it closely, it's subtly different. So in case someone (like me) actually wants to split a list into a given number of almost equally sized sublists, then read on.

I simply ported the algorithm described here to Java.

@Test
public void shouldPartitionListIntoAlmostEquallySizedSublists() {

    List<String> list = Arrays.asList("a", "b", "c", "d", "e", "f", "g");
    int numberOfPartitions = 3;

    List<List<String>> split = IntStream.range(0, numberOfPartitions).boxed()
            .map(i -> list.subList(
                    partitionOffset(list.size(), numberOfPartitions, i),
                    partitionOffset(list.size(), numberOfPartitions, i + 1)))
            .collect(toList());

    assertThat(split, hasSize(numberOfPartitions));
    assertEquals(list.size(), split.stream().flatMap(Collection::stream).count());
    assertThat(split, hasItems(Arrays.asList("a", "b", "c"), Arrays.asList("d", "e"), Arrays.asList("f", "g")));
}

private static int partitionOffset(int length, int numberOfPartitions, int partitionIndex) {
    return partitionIndex * (length / numberOfPartitions) + Math.min(partitionIndex, length % numberOfPartitions);
}

Solved post but I'd like to mention my preferred solution. Namely, define a generic one-liner script eval_func.sh:

#!/bin/bash
source $1 && shift && "@a"

Then call any function within any script via:

./eval_func.sh <any script> <any function> <any args>...

An issue I ran into with the accepted solution is that when sourcing my function-containing script within another script, the arguments of the latter would be evaluated by the former, causing an error.

Your input fragment

public class SecondFragment extends Fragment  {


    EditText etext;
    Button btn;
    String etex;
    @Override
    public View onCreateView(LayoutInflater inflater, ViewGroup container, Bundle savedInstanceState) {
        View v = inflater.inflate(R.layout.secondfragment, container, false);
        etext = (EditText) v.findViewById(R.id.editText4);
        btn = (Button) v.findViewById(R.id.button);
        btn.setOnClickListener(mClickListener);
        return v;
    }

    View.OnClickListener mClickListener = new View.OnClickListener() {
        @Override
        public void onClick(View v) {


            etex = etext.getText().toString();
            FragmentTransaction transection = getFragmentManager().beginTransaction();
            Viewfragment mfragment = new Viewfragment();
            //using Bundle to send data
            Bundle bundle = new Bundle();
            bundle.putString("textbox", etex);
            mfragment.setArguments(bundle); //data being send to SecondFragment
            transection.replace(R.id.frame, mfragment);
            transection.isAddToBackStackAllowed();
            transection.addToBackStack(null);
            transection.commit();

        }
    };



}

your view fragment

public class Viewfragment extends Fragment {

    TextView txtv;
    public View onCreateView(LayoutInflater inflater, ViewGroup container, Bundle savedInstanceState) {
        View v = inflater.inflate(R.layout.viewfrag,container,false);
        txtv = (TextView)  v.findViewById(R.id.textView4);
        Bundle bundle=getArguments();
        txtv.setText(String.valueOf(bundle.getString("textbox")));
        return v;
    }


}

Here's how I'd do it

import java.util.ArrayList;
import java.util.Random;

public class Test {
    public static void main(String[] args) {
        int size = 20;

        ArrayList<Integer> list = new ArrayList<Integer>(size);
        for(int i = 1; i <= size; i++) {
            list.add(i);
        }

        Random rand = new Random();
        while(list.size() > 0) {
            int index = rand.nextInt(list.size());
            System.out.println("Selected: "+list.remove(index));
        }
    }
}

As the esteemed Mr Skeet has pointed out:
If n is the number of randomly selected numbers you wish to choose and N is the total sample space of numbers available for selection:

1. If n << N, you should just store the numbers that you have picked and check a list to see if the number selected is in it.
2. If n ~= N, you should probably use my method, by populating a list containing the entire sample space and then removing numbers from it as you select them.

Check this query in Athena for only one-space separated string (e.g. first name and middle name combination):

SELECT name, REVERSE( SUBSTR( REVERSE(name), 1, STRPOS(REVERSE(name), ' ') ) ) AS middle_name FROM name_table

If you expect to have two or more spaces, you can easily extend the above query.

Instead, you could git CtrlZ and retry the commit but this time add " -m " with a message in quotes after it, then it will commit without prompting you with that page.

\r is a carriage return character; it tells your terminal emulator to move the cursor at the start of the line.

The cursor is the position where the next characters will be rendered.

So, printing a \r allows to override the current line of the terminal emulator.

Tom Zych figured why the output of your program is o world while the \r is at the end of the line and you don't print anything after that:

When your program exits, the shell prints the command prompt. The terminal renders it where you left the cursor. Your program leaves the cursor at the start of the line, so the command prompt partly overrides the line you printed. This explains why you seen your command prompt followed by o world.

The online compiler you mention just prints the raw output to the browser. The browser ignores control characters, so the \r has no effect.

See https://en.wikipedia.org/wiki/Carriage_return

Here is a usage example of \r:

#include <stdio.h>
#include <unistd.h>

int main()
{
        char chars[] = {'-', '\\', '|', '/'};
        unsigned int i;

        for (i = 0; ; ++i) {
                printf("%c\r", chars[i % sizeof(chars)]);
                fflush(stdout);
                usleep(200000);
        }

        return 0;
}

It repeatedly prints the characters - \ | / at the same position to give the illusion of a rotating | in the terminal.

We make Webapps statefull by overriding HTTP stateless behaviour by using session objects.When we use session objets state is carried but we still use HTTP only.

Another way ..

<img ng-src="{{!video.playing ? 'img/icons/play-rounded-button-outline.svg' : 'img/icons/pause-thin-rounded-button.svg'}}" />

You could make use of the Javascript DOM API. In particular, look at the createElement() method.

You could create a re-usable function that will create an image like so...

function show_image(src, width, height, alt) {
    var img = document.createElement("img");
    img.src = src;
    img.width = width;
    img.height = height;
    img.alt = alt;

    // This next line will just add it to the <body> tag
    document.body.appendChild(img);
}

Then you could use it like this...

<button onclick=
    "show_image('http://google.com/images/logo.gif', 
                 276, 
                 110, 
                 'Google Logo');">Add Google Logo</button> 

See a working example on jsFiddle: http://jsfiddle.net/Bc6Et/

ul.menu li a:before, ul.menu li .item:before, ul.menu li .separator:before {
  content: "\2022";
  font-family: FontAwesome;
  margin-right: 10px;
  display: inline;
  vertical-align: middle;
  font-size: 1.6em;
  font-weight: normal;
}

Is present in your site's CSS, looks like it's coming from a compiled CSS file from within your application. Perhaps from a plugin. Changing the name of the "menu" class you are using should resolve the issue.

Visual for you - http://i.imgur.com/d533SQD.png

To expand on persistent's answer, and to provide more of the functionality of NUnit, you can do this:

public bool AssertThrows<TException>(
    Action action,
    Func<TException, bool> exceptionCondition = null)
    where TException : Exception
{
    try
    {
        action();
    }
    catch (TException ex)
    {
        if (exceptionCondition != null)
        {
            return exceptionCondition(ex);
        }
        return true;
    }
    catch
    {
        return false;
    }

    return false;
}

Examples:

// No exception thrown - test fails.
Assert.IsTrue(
    AssertThrows<InvalidOperationException>(
        () => {}));

// Wrong exception thrown - test fails.
Assert.IsTrue(
    AssertThrows<InvalidOperationException>(
        () => { throw new ApplicationException(); }));

// Correct exception thrown - test passes.
Assert.IsTrue(
    AssertThrows<InvalidOperationException>(
        () => { throw new InvalidOperationException(); }));

// Correct exception thrown, but wrong message - test fails.
Assert.IsTrue(
    AssertThrows<InvalidOperationException>(
        () => { throw new InvalidOperationException("ABCD"); },
        ex => ex.Message == "1234"));

// Correct exception thrown, with correct message - test passes.
Assert.IsTrue(
    AssertThrows<InvalidOperationException>(
        () => { throw new InvalidOperationException("1234"); },
        ex => ex.Message == "1234"));

You can pass a config object to axios like:

axios({
  method: 'post',
  url: '....',
  params: {'HTTP_CONTENT_LANGUAGE': self.language},
  headers: {'header1': value}
})

In LINQ you could do something like:

foreach (var data in from DataRow row in dataTable.Rows
                     from DataColumn col in dataTable.Columns
                          where
                              row[col] != null
                          select row[col])
{
    // do something with data
}

I know my code is little length and little time complexity but it's understandable so I tried this way.

I'm trying to develop prototype based function here and code also change.

Here,Distinct is my own prototype function.

<script>_x000D_
  var array = [{_x000D_
      "name": "Joe",_x000D_
      "age": 17_x000D_
    },_x000D_
    {_x000D_
      "name": "Bob",_x000D_
      "age": 17_x000D_
    },_x000D_
    {_x000D_
      "name": "Carl",_x000D_
      "age": 35_x000D_
    }_x000D_
  ]_x000D_
_x000D_
  Array.prototype.Distinct = () => {_x000D_
    var output = [];_x000D_
    for (let i = 0; i < array.length; i++) {_x000D_
      let flag = true;_x000D_
      for (let j = 0; j < output.length; j++) {_x000D_
        if (array[i].age == output[j]) {_x000D_
          flag = false;_x000D_
          break;_x000D_
        }_x000D_
      }_x000D_
      if (flag)_x000D_
        output.push(array[i].age);_x000D_
    }_x000D_
    return output;_x000D_
  }_x000D_
  //Distinct is my own function_x000D_
  console.log(array.Distinct());_x000D_
</script>

You can use Command prompt for VS 2010 and then select the path that your boost located. Use "bootstrap.bat", you can successfully install it.

This Code work for me :

fetch('http://localhost:8080')
  .then(response => response.json())
  .then(json => {
  this.setState({mystate: this.state.mystate.push.apply(this.state.mystate, json)})
})

You can try something like this:

long x = somevalue;

double y = Double.longBitsToDouble(x);

c.take(10)

and Spark newer version will show table nicely.

You can use the "vh" length unit for the min-height property of the element itself and its parents. It's supported since IE9:

<body class="full-height">
    <form id="form1">
    <div id="header">
        <a title="Home" href="index.html" />
    </div>

    <div id="menuwrapper">
        <div id="menu">
        </div>
    </div>

    <div id="content" class="full-height">
    </div>
</body>

CSS:

.full-height {
    min-height: 100vh;
    box-sizing: border-box;
}

You can use result emitted from previous Observable thanks to mergeMap (or his alias flatMap) operator like this:

 const one = Observable.of('https://api.github.com/users');
 const two = (c) => ajax(c);//ajax from Rxjs/dom library

 one.mergeMap(two).subscribe(c => console.log(c))

You can try this

alert(document.getElementById('listItem').firstChild.data)

This is what worked for me.

STEP 1 - First things first

// In the console
// First install jQuery
npm install --save jquery
// and jQuery Definition
npm install -D @types/jquery

STEP 2 - IMPORT

// Now, within any of the app files (ES2015 style)
import * as $ from 'jquery';
//
$('#elemId').width();

// OR

// CommonJS style - working with "require"
import $ = require('jquery')
//
$('#elemId').width();

#UPDATE - Feb - 2017

Lately, I'm writing code with ES6 instead of typescript and am able to import without * as $ in the import statement. This is what it looks like now:

import $ from 'jquery';
//
$('#elemId').width();

Good Luck.

GitHub Pages is GitHub’s official solution to this problem.

raw.githubusercontent makes all files use the text/plain MIME type, even if the file is a CSS or JavaScript file. So going to https://raw.githubusercontent.com/‹user›/‹repo›/‹branch›/‹filepath› will not be the correct MIME type but instead a plaintext file, and linking it via <link href="..."/> or <script src="..."></script> won’t work—the CSS won’t apply / the JS won’t run.

GitHub Pages hosts your repo at a special URL, so all you have to do is check-in your files and push. Note that in most cases, GitHub Pages requires you to commit to a special branch, gh-pages.

On your new site, which is usually https://‹user›.github.io/‹repo›, every file committed to the gh-pages branch (the most recent commit) is present at this url. So then you can link to your js file via <script src="https://‹user›.github.io/‹repo›/file.js"></script>, and this will be the correct MIME type.

Do you have build files?

Personally, my recommendation is to run this branch parallel to master. On the gh-pages branch, you can edit your .gitignore file to check in all the dist/build files you need for your site (e.g. if you have any minified/compiled files), while keeping them ignored on your master branch. This is useful because you typically don’t want to track changes in build files in your regular repo. Every time you want to update your hosted files, simply merge master into gh-pages, rebuild, commit, and then push.

(protip: you can merge and rebuild in the same commit with these steps:)

$ git checkout gh-pages
$ git merge --no-ff --no-commit master  # prepare the merge but don’t commit it (as if there were a merge conflict)
$ npm run build                         # (or whatever your build process is)
$ git add .                             # stage the newly built files
$ git merge --continue                  # commit the merge
$ git push origin gh-pages

You need to have the testng.jar under classpath.

try C:\projectfred> java -cp "path-tojar/testng.jar:path_to_yourtest_classes" org.testng.TestNG testng.xml

Update:

Under linux I ran this command and it would be some thing similar on Windows either

test/bin# java -cp ".:../lib/*" org.testng.TestNG testng.xml

Directory structure:

/bin - All my test packages are under bin including testng.xml
/src - All source files are under src
/lib - All libraries required for the execution of tests are under this.

Once I compile all sources they go under bin directory. So, in the classpath I need to specify contents of bin directory and all the libraries like testng.xml, loggers etc over here. Also copy testng.xml to bin folder if you dont want to specify the full path where the testng.xml is available.

 /bin
    -- testng.xml
    -- testclasses
    -- Properties files if any.
 /lib
    -- testng.jar
    -- log4j.jar

Update:

Go to the folder MyProject and type run the java command like the way shown below:-

java -cp ".: C:\Program Files\jbdevstudio4\studio\plugins\*" org.testng.TestNG testng.xml

I believe the testng.xml file is under C:\Users\me\workspace\MyProject if not please give the full path for testng.xml file

Add bottom:100% to your #menu:hover ul li:hover ul rule

Demo 1

#menu:hover ul li:hover ul {
    position: absolute;
    margin-top: 1px;
    font: 10px;
    bottom: 100%; /* added this attribute */
}

Or better yet to prevent the submenus from having the same effect, just add this rule

Demo 2

#menu>ul>li:hover>ul { 
    bottom:100%;
}

Demo 3

source: http://jsfiddle.net/W5FWW/4/

And to get back the border you can add the following attribute

#menu>ul>li:hover>ul { 
    bottom:100%;
    border-bottom: 1px solid transparent
}

subscribe() -Invokes an execution of an Observable and registers Observer handlers for notifications it will emit. -Observable- representation of any set of values over any amount of time.

cin >> choice;
while(choice!=99) {
    cin>>gNum;
    cin >> choice
}

You don't need a break, in that case.

You can use IterableOf from Cactoos:

Iterable<String> names = new IterableOf<>(
  "Scott Fitzgerald", "Fyodor Dostoyevsky"
);

Then, you can turn it into a list using ListOf:

List<String> names = new ListOf<>(
  new IterableOf<>(
    "Scott Fitzgerald", "Fyodor Dostoyevsky"
  )
);

Or simply this:

List<String> names = new ListOf<>(
  "Scott Fitzgerald", "Fyodor Dostoyevsky"
);

Here you will get list of diffrent ways of applying the click event. You can select accordingly as suaitable or if your click is not working just try an alternative out of these.

$('.clickHere').click(function(){ 
     // this is flat click. this event will be attatched 
     //to element if element is available in 
     //dom at the time when JS loaded. 

  // do your stuff
});

$('.clickHere').on('click', function(){ 
    // same as first one

    // do your stuff
})

$(document).on('click', '.clickHere', function(){
          // this is diffrent type 
          //  of click. The click will be registered on document when JS 
          //  loaded and will delegate to the '.clickHere ' element. This is 
          //  called event delegation 
   // do your stuff
});

$('body').on('click', '.clickHere', function(){
   // This is same as 3rd 
   // point. Here we used body instead of document/

   // do your stuff
});

$('.clickHere').off().on('click', function(){ // 
    // deregister event listener if any and register the event again. This 
    // prevents the duplicate event resistration on same element. 
    // do your stuff
})

Try this;

Add-Content -path $logpath @"
$((get-date).tostring()) Error $keyPath $value
key $key expected: $policyValue
local value is:  $localValue
"@

Check - LSNRCTL> stat I got result like -

Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1522)))
STATUS of the LISTENER
------------------------
Alias                     LISTENER
Version                   TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Production 
Start Date                17-APR-2016 10:12:38 
Uptime                    0 days 10 hr. 6 min. 16 sec 
Trace Level               off 
Security                  ON: Local OS Authentication 
SNMP                      OFF
Listener Parameter File 
                        C:\product\11.2.0\dbhome_1\network\admin\listener.ora
Listener Log File        c:\app\admin\diag\tnslsnr\admin-PC\listener\alert\log.xml Listening
Endpoints Summary...  
  (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1522ipc)))
  (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1522)))
Services Summary... Service "CLRExtProc" has 1 instance(s).   Instance
 "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "orcl" has 1 instance(s).   Instance "orcl", status READY, has 1 handler(s) for this service... 
Service "orclXDB" has 1 instance(s). 
  Instance "orcl", status READY, has 1 handler(s) for this service...
The command completed successfully.

From above details - My port no is - 1522 and i am able to create connection using "orcl" instance - so i used port as 1522 and instance as "orcl" -- Now URL is -

DriverManager.getConnection("jdbc:oracle:thin:@localhost:1522:orcl", "SYS as SYSDBA","password");

It worked for me So please check LSNRCTL> stat in command prompt and configure your connection url accordingly.
Hope it will help Someone.

Tarc's answer is the best.

Much of the enum discussion is a red herring.

Compare this code snippet:-

int strategy;
strategy = 1;   
void some_function(void) 
{
}

which gives

error C2501: 'strategy' : missing storage-class or type specifiers
error C2086: 'strategy' : redefinition

with this one which compiles with no problem.

int strategy;
void some_function(void) 
{
    strategy = 1;   
}

The variable strategy needs to be set at declaration or inside a function etc. You cannot write arbitrary software - assignments in particular - at the global scope.

The fact that he used enum {RANDOM, IMMEDIATE, SEARCH} instead of int is only relevant to the extent that it has confused people that can't see beyond it. The redefinition error messages in the question show that this is what the author has done wrong.

So now you should be able to see why the first of the example below is wrong and the other three are okay.

Example 1. WRONG!

enum {RANDOM, IMMEDIATE, SEARCH} strategy;
strategy = IMMEDIATE;
void some_function(void) 
{
}

Example 2. RIGHT.

enum {RANDOM, IMMEDIATE, SEARCH} strategy = IMMEDIATE;
void some_function(void) 
{
}

Example 3. RIGHT.

enum {RANDOM, IMMEDIATE, SEARCH} strategy;
void some_function(void) 
{
    strategy = IMMEDIATE;
}

Example 4. RIGHT.

void some_function(void) 
{
    enum {RANDOM, IMMEDIATE, SEARCH} strategy;
    strategy = IMMEDIATE;
}

If you have a working program you should just be able to paste these snippets into your program and see that some compile and some do not.

Your original problem is that pip cannot write the logs to the folder.

IOError: [Errno 13] Permission denied: '/Users/markwalker/Library/Logs/pip.log'

You need to cd into a folder in which the process invoked can write like /tmp so a cd /tmp and re invoking the command will probably work but is not what you want.

BUT actually for this particular case (you not wanting to use sudo for installing python packages) and no need for global package installs you can use the --user flag like this :

pip install --user <packagename>

and it will work just fine.

I assume you have a one user python python installation and do not want to bother with reading about virtualenv (which is not very userfriendly) or pipenv.

As some people in the comments section have pointed out the next approach is not a very good idea unless you do not know what to do and got stuck:

Another approach for global packages like in your case you want to do something like :

chown -R $USER /Library/Python/2.7/site-packages/

or more generally

chown -R $USER <path to your global pip packages>

Itertools repeat combined with list extend.

from itertools import repeat
l = []
l.extend(repeat(x, 100))

Wireshark (or Tshark) is probably the defacto standard traffic inspection tool. It is unobtrusive and works without fiddling with port redirecting and proxying. It is very generic, though, as does not (AFAIK) provide any tooling specifically to monitor web service traffic - it's all tcp/ip and http.

You have probably already looked at tcpmon but I don't know of any other tool that does the sit-in-between thing.

The best way to get filetype-specific indentation is to use filetype plugin indent on in your vimrc. Then you can specify things like set sw=4 sts=4 et in .vim/ftplugin/c.vim, for example, without having to make those global for all files being edited and other non-C type syntaxes will get indented correctly, too (even lisps).

Don't waste your time trying to resolve this issue, this was made clear by the makers themselves. Instead of cv2.imshow() use this:

img = cv2.imread('path_to_image')
plt.imshow(img, cmap = 'gray', interpolation = 'bicubic')
plt.xticks([]), plt.yticks([])  # to hide tick values on X and Y axis
plt.show()

following statement cleans object using map function.

var arraytoclean = [{v:65, toberemoved:"gronf"}, {v:12, toberemoved:null}, {v:4}];
arraytoclean.map((x,i)=>x.toberemoved=undefined);
console.dir(arraytoclean);

From my experience, the http://www.facebook.com/sharer.php does not use meta tags. It uses the string you pass. See below.

http://www.facebook.com/sharer.php?s=100&p[title]=THIS IS MY TITLE&p[summary]=THIS IS MY SUMMARY&p[url]=http://www.MYURL.com&&p[images][0]=http://www.MYURL.com/img/IMAGEADDRESS

The meta tags work with Facebook's developer like/send buttons, as does the other Open Graph info. So if you use one of Facebook's actual elements like the comments and such, that will all tie into the Open Graph stuff.

UPDATE: There are two ways to use the sharer * note the ?s versus the ?u value in the query string
1 ==> STRING: http://www.facebook.com/sharer.php?s + content from above
~~> Will pull info from the string.
2 ==> URL: http://www.facebook.com/sharer.php?u=url where url equals an actual url
~~> Will scrape the page provided in the url value
~~> You can test test the values here: https://developers.facebook.com/tools/debug

Eg: n sub-category level for categories .Below table primary-key id is referred by foreign-key sub_category_id

get_categories(number){
 return this.http.post( url, body, {headers: headers, withCredentials:true})
      .map(t=>  {
          this.total = t.json();
          return total;
      }).share();
  );     
}

then

this.get_category(1).subscribe(t=> {
      this.callfunc();
});

For the folder name and drive, you can use:

echo %~dp0

You can get a lot more information using different modifiers:

%~I         - expands %I removing any surrounding quotes (")
%~fI        - expands %I to a fully qualified path name
%~dI        - expands %I to a drive letter only
%~pI        - expands %I to a path only
%~nI        - expands %I to a file name only
%~xI        - expands %I to a file extension only
%~sI        - expanded path contains short names only
%~aI        - expands %I to file attributes of file
%~tI        - expands %I to date/time of file
%~zI        - expands %I to size of file

The modifiers can be combined to get compound results:
%~dpI       - expands %I to a drive letter and path only
%~nxI       - expands %I to a file name and extension only
%~fsI       - expands %I to a full path name with short names only

This is a copy paste from the "for /?" command on the prompt. Hope it helps.

Related

Top 10 DOS Batch tips (Yes, DOS Batch...) shows batchparams.bat (link to source as a gist):

C:\Temp>batchparams.bat c:\windows\notepad.exe
%~1     =      c:\windows\notepad.exe
%~f1     =      c:\WINDOWS\NOTEPAD.EXE
%~d1     =      c:
%~p1     =      \WINDOWS\
%~n1     =      NOTEPAD
%~x1     =      .EXE
%~s1     =      c:\WINDOWS\NOTEPAD.EXE
%~a1     =      --a------
%~t1     =      08/25/2005 01:50 AM
%~z1     =      17920
%~$PATHATH:1     =
%~dp1     =      c:\WINDOWS\
%~nx1     =      NOTEPAD.EXE
%~dp$PATH:1     =      c:\WINDOWS\
%~ftza1     =      --a------ 08/25/2005 01:50 AM 17920 c:\WINDOWS\NOTEPAD.EXE

Answer is adding to @Sebas' answer - setting the collation of my local environment. Do not try this on production.

ALTER DATABASE databasename CHARACTER SET utf8 COLLATE utf8_unicode_ci;

ALTER TABLE tablename CONVERT TO CHARACTER SET utf8 COLLATE utf8_unicode_ci;

Source of this solution

I found JXDatePicker as a better solution to this. It gives what you need and very easy to use.

import java.text.SimpleDateFormat;
import java.util.Calendar;
import javax.swing.JFrame;
import javax.swing.JPanel;
import org.jdesktop.swingx.JXDatePicker;

public class DatePickerExample extends JPanel {

    public static void main(String[] args) {
        JFrame frame = new JFrame("JXPicker Example");
        JPanel panel = new JPanel();

        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        frame.setBounds(400, 400, 250, 100);

        JXDatePicker picker = new JXDatePicker();
        picker.setDate(Calendar.getInstance().getTime());
        picker.setFormats(new SimpleDateFormat("dd.MM.yyyy"));

        panel.add(picker);
        frame.getContentPane().add(panel);

        frame.setVisible(true);
    }
}

I'd start with something like this (and if there is something wrong with my code, I'd of course appreciate any comment):

public class ItemsList extends ListActivity {

private ItemsAdapter adapter;

@Override
protected void onCreate(Bundle savedInstanceState) {
    super.onCreate(savedInstanceState);

    setContentView(R.layout.items_list);

    this.adapter = new ItemsAdapter(this, R.layout.items_list_item, ItemManager.getLoadedItems());
    setListAdapter(this.adapter);
}

private class ItemsAdapter extends ArrayAdapter<Item> {

    private Item[] items;

    public ItemsAdapter(Context context, int textViewResourceId, Item[] items) {
        super(context, textViewResourceId, items);
        this.items = items;
    }

    @Override
    public View getView(int position, View convertView, ViewGroup parent) {
        View v = convertView;
        if (v == null) {
            LayoutInflater vi = (LayoutInflater)getSystemService(Context.LAYOUT_INFLATER_SERVICE);
            v = vi.inflate(R.layout.items_list_item, null);
        }

        Item it = items[position];
        if (it != null) {
            ImageView iv = (ImageView) v.findViewById(R.id.list_item_image);
            if (iv != null) {
                iv.setImageDrawable(it.getImage());
            }
        }

        return v;
    }
}

@Override
protected void onListItemClick(ListView l, View v, int position, long id) {
    this.adapter.getItem(position).click(this.getApplicationContext());
}
}

E.g. extending ArrayAdapter with own type of Items (holding information about your pictures) and overriden getView() method, that prepares view for items within list. There is also method add() on ArrayAdapter to add items to the end of the list.

R.layout.items_list is simple layout with ListView

R.layout.items_list_item is layout representing one item in list

This is a optimized version of the function which removes dependency on BitConverter function and makes it compatible with NETMF (.NET Micro Framework)

public static DateTime GetNetworkTime()
{
    const string ntpServer = "pool.ntp.org";
    var ntpData = new byte[48];
    ntpData[0] = 0x1B; //LeapIndicator = 0 (no warning), VersionNum = 3 (IPv4 only), Mode = 3 (Client Mode)

    var addresses = Dns.GetHostEntry(ntpServer).AddressList;
    var ipEndPoint = new IPEndPoint(addresses[0], 123);
    var socket = new Socket(AddressFamily.InterNetwork, SocketType.Dgram, ProtocolType.Udp);

    socket.Connect(ipEndPoint);
    socket.Send(ntpData);
    socket.Receive(ntpData);
    socket.Close();

    ulong intPart = (ulong)ntpData[40] << 24 | (ulong)ntpData[41] << 16 | (ulong)ntpData[42] << 8 | (ulong)ntpData[43];
    ulong fractPart = (ulong)ntpData[44] << 24 | (ulong)ntpData[45] << 16 | (ulong)ntpData[46] << 8 | (ulong)ntpData[47];

    var milliseconds = (intPart * 1000) + ((fractPart * 1000) / 0x100000000L);
    var networkDateTime = (new DateTime(1900, 1, 1)).AddMilliseconds((long)milliseconds);

    return networkDateTime;
}

Modern string formatting:

"{} and {}".format("string", 1)

I've been dealing with a very similar problem and have been able to achieve what I was looking for, even though I'm using SQL Server 2000. I know it is an old question, but think its valid to post here the solution since there should be others like me that use old versions and still need help.

Here's the trick: SQL Server won't accept passing a table to a UDF, nor you can pass a T-SQL query so the function creates a temp table or even calls a stored procedure to do that. So, instead, I've created a reserved table, which I called xtList. This will hold the list of values (1 column, as needed) to work with.

CREATE TABLE [dbo].[xtList](
    [List] [varchar](1000) NULL
) ON [PRIMARY]

Then, a stored procedure to populate the list. This is not strictly necessary, but I think is very usefull and best practice.

-- =============================================
-- Author:      Zark Khullah
-- Create date: 20/06/2014
-- =============================================
CREATE PROCEDURE [dbo].[xpCreateList]
    @ListQuery varchar(2000)
AS
BEGIN
    SET NOCOUNT ON;

  DELETE FROM xtList

  INSERT INTO xtList
    EXEC(@ListQuery)
END

Now, just deal with the list in any way you want, using the xtList. You can use in a procedure (for executing several T-SQL commands), scalar functions (for retrieving several strings) or multi-statement table-valued functions (retrieves the strings but like it was inside a table, 1 string per row). For any of that, you'll need cursors:

DECLARE @Item varchar(100)
DECLARE cList CURSOR DYNAMIC
  FOR (SELECT * FROM xtList WHERE List is not NULL)
  OPEN cList

FETCH FIRST FROM cList INTO @Item
WHILE @@FETCH_STATUS = 0 BEGIN

  << desired action with values >>

FETCH NEXT FROM cList INTO @Item
END
CLOSE cList
DEALLOCATE cList

The desired action would be as follows, depending on which type of object created:

Stored procedures

-- =============================================
-- Author:      Zark Khullah
-- Create date: 20/06/2014
-- =============================================
CREATE PROCEDURE [dbo].[xpProcreateExec]
(
    @Cmd varchar(8000),
    @ReplaceWith varchar(1000)
)
AS
BEGIN
  DECLARE @Query varchar(8000)

  << cursor start >>
    SET @Query = REPLACE(@Cmd,@ReplaceWith,@Item)
    EXEC(@Query)
  << cursor end >>
END

/* EXAMPLES

  (List A,B,C)

  Query = 'SELECT x FROM table'
    with EXEC xpProcreateExec(Query,'x') turns into
  SELECT A FROM table
  SELECT B FROM table
  SELECT C FROM table

  Cmd = 'EXEC procedure ''arg''' --whatchout for wrong quotes, since it executes as dynamic SQL
    with EXEC xpProcreateExec(Cmd,'arg') turns into
  EXEC procedure 'A'
  EXEC procedure 'B'
  EXEC procedure 'C'

*/

Scalar functions

-- =============================================
-- Author:      Zark Khullah
-- Create date: 20/06/2014
-- =============================================
CREATE FUNCTION [dbo].[xfProcreateStr]
(
    @OriginalText varchar(8000),
    @ReplaceWith varchar(1000)
)
RETURNS varchar(8000)
AS
BEGIN
    DECLARE @Result varchar(8000)

  SET @Result = ''
  << cursor start >>
    SET @Result = @Result + REPLACE(@OriginalText,@ReplaceWith,@Item) + char(13) + char(10)
  << cursor end >>

    RETURN @Result
END

/* EXAMPLE

  (List A,B,C)

  Text = 'Access provided for user x'
    with "SELECT dbo.xfProcreateStr(Text,'x')" turns into
  'Access provided for user A
  Access provided for user B
  Access provided for user C'

*/

Multi-statement table-valued functions

-- =============================================
-- Author:      Zark Khullah
-- Create date: 20/06/2014
-- =============================================
CREATE FUNCTION [dbo].[xfProcreateInRows]
(
    @OriginalText varchar(8000),
    @ReplaceWith varchar(1000)
)
RETURNS 
@Texts TABLE 
(
    Text varchar(2000)
)
AS
BEGIN
  << cursor start >>
      INSERT INTO @Texts VALUES(REPLACE(@OriginalText,@ReplaceWith,@Item))
  << cursor end >>
END

/* EXAMPLE

  (List A,B,C)

  Text = 'Access provided for user x'
    with "SELECT * FROM dbo.xfProcreateInRow(Text,'x')" returns rows
  'Access provided for user A'
  'Access provided for user B'
  'Access provided for user C'

*/

If you are using springboot then jackson is added by default,

So the version of jackson you are adding manualy is probably conflicting with the one spring boot adds,

Try to delete the jackson dependencies from your pom,

If you need to override the version spring boots add, then you need to exclude it first and then add your own

You can create a MemoryStream from a String and use that in any third-party function that requires a stream. In this case, MemoryStream, with the help of UTF8.GetBytes, provides the functionality of Java's StringStream.

From String examples

String content = "stuff";
using (MemoryStream stream = new MemoryStream(System.Text.Encoding.UTF8.GetBytes(content)))
{
    Print(stream); //or whatever action you need to perform with the stream
    stream.Seek(0, SeekOrigin.Begin); //If you need to use the same stream again, don't forget to reset it.
    UseAgain(stream);
}

To String example

stream.Seek(0, SeekOrigin.Begin);
string s;
using (var readr = new StreamReader(stream))
{
    s = readr.ReadToEnd();
}
//and don't forget to dispose the stream if you created it

UPDLOCK is used when you want to lock a row or rows during a select statement for a future update statement. The future update might be the very next statement in the transaction.

Other sessions can still see the data. They just cannot obtain locks that are incompatiable with the UPDLOCK and/or HOLDLOCK.

You use UPDLOCK when you wan to keep other sessions from changing the rows you have locked. It restricts their ability to update or delete locked rows.

You use HOLDLOCK when you want to keep other sessions from changing any of the data you are looking at. It restricts their ability to insert, update, or delete the rows you have locked. This allows you to run the query again and see the same results.

I wanted to share one way to do the radio button (and entire HTML form) without using the @Html.RadioButtonFor helper, although I think @Html.RadioButtonFor is probably the better and newer way (for one thing, it's strongly typed, so is closely linked to theModelProperty). Nevertheless, here's an old-fashioned, different way you can do it:

    <form asp-action="myActionMethod" method="post">
        <h3>Do you like pizza?</h3>
        <div class="checkbox">
            <label>
                <input asp-for="likesPizza"/> Yes
            </label>
        </div>
    </form>

This code can go in a myView.cshtml file, and also uses classes to get the radio-button (checkbox) formatting.

You might also want to look at the subprocess module, which was built to replace the whole family of Python popen-type calls.

import subprocess
output = subprocess.check_output("cat /etc/services", shell=True)

The advantage it has is that there is a ton of flexibility with how you invoke commands, where the standard in/out/error streams are connected, etc.

    JSONArray ja = new JSONArray(json);
    JSONObject ob = ja.getJSONObject(0);
    String nh = ob.getString("status");

[ { "status" : "true" } ]

where 'json' is a String and status is the key from which i will get value

You have to go to the "Pricing" menu. Even if the availability date is in the past, sometimes you have to set it again for today's date. Apple doesn't tell you to do this, but I found that the app goes live after resetting the dates again, especially if there's been app rejections in the past. I guess it messes up with the dates. Looks like sometimes if you do nothing and just follow the instructions, the app will never go live.

If swfobject won't suffice, or you need to create something a little more bespoke, try this:

var hasFlash = false;
try {
    hasFlash = Boolean(new ActiveXObject('ShockwaveFlash.ShockwaveFlash'));
} catch(exception) {
    hasFlash = ('undefined' != typeof navigator.mimeTypes['application/x-shockwave-flash']);
}

It works with 7 and 8.

If you're looking for the path of a specific app, a quick and dirty solution is to just grep the bugreport:

$ adb bugreport | grep 'dir=/data/app' 

I don't know that this will provide an exhaustive list, so it may help to run the app first.

The following allows for the ordering of objects by key OR by a key within an object.

In template you can do something like:

    <li ng-repeat="(k,i) in objectList | orderObjectsBy: 'someKey'">

Or even:

    <li ng-repeat="(k,i) in objectList | orderObjectsBy: 'someObj.someKey'">

The filter:

app.filter('orderObjectsBy', function(){
 return function(input, attribute) {
    if (!angular.isObject(input)) return input;

    // Filter out angular objects.
    var array = [];
    for(var objectKey in input) {
      if (typeof(input[objectKey])  === "object" && objectKey.charAt(0) !== "$")
        array.push(input[objectKey]);
    }

    var attributeChain = attribute.split(".");

    array.sort(function(a, b){

      for (var i=0; i < attributeChain.length; i++) {
        a = (typeof(a) === "object") && a.hasOwnProperty( attributeChain[i]) ? a[attributeChain[i]] : 0;
        b = (typeof(b) === "object") && b.hasOwnProperty( attributeChain[i]) ? b[attributeChain[i]] : 0;
      }

      return parseInt(a) - parseInt(b);
    });

    return array;
 }
})

@media all and (orientation:portrait) {
/* Style adjustments for portrait mode goes here */
}

@media all and (orientation:landscape) {
  /* Style adjustments for landscape mode goes here */
}

but it still looks like you have to experiment

With react-router v2.8.1 (probably other 2.x.x versions as well, but I haven't tested it) you can use this implementation to do a Router redirect.

import { Router } from 'react-router';

export default class Foo extends Component {

  static get contextTypes() {
    return {
      router: React.PropTypes.object.isRequired,
    };
  }

  handleClick() {
    this.context.router.push('/some-path');
  }
}

I was in need of copying the data from one workbook to another using VBA. The requirement was as mentioned below 1. On pressing an Active X button open the dialogue to select the file from which the data needs to be copied. 2. On clicking OK the value should get copied from a cell / range to currently working workbook.

I did not want to use the open function because it opens the workbook which will be annoying

Below is the code that I wrote in the VBA. Any improvement or new alternative is welcome.

Code: Here I am copying the A1:C4 content from a workbook to the A1:C4 of current workbook

    Private Sub CommandButton1_Click()
        Dim BackUp As String
        Dim cellCollection As New Collection
        Dim strSourceSheetName As String
        Dim strDestinationSheetName As String
        strSourceSheetName = "Sheet1" 'Mention the Source Sheet Name of Source Workbook
        strDestinationSheetName = "Sheet2" 'Mention the Destination Sheet Name of Destination Workbook


        Set cellCollection = GetCellsFromRange("A1:C4") 'Mention the Range you want to copy data from Source Workbook

        With Application.FileDialog(msoFileDialogOpen)
            .AllowMultiSelect = False
            .Show
            '.Filters.Add "Macro Enabled Xl", "*.xlsm;", 1

            For intWorkBookCount = 1 To .SelectedItems.Count
                Dim strWorkBookName As String
                strWorkBookName = .SelectedItems(intWorkBookCount)
                For cellCount = 1 To cellCollection.Count
                    On Error GoTo ErrorHandler
                    BackUp = Sheets(strDestinationSheetName).Range(cellCollection.Item(cellCount))
                    Sheets(strDestinationSheetName).Range(cellCollection.Item(cellCount)) = GetData(strWorkBookName, strSourceSheetName, cellCollection.Item(cellCount))
                    Dim strTempValue As String
                    strTempValue = Sheets(strDestinationSheetName).Range(cellCollection.Item(cellCount)).Value
                    If (strTempValue = "0") Then
                        strTempValue = BackUp
                    End If
Sheets(strDestinationSheetName).Range(cellCollection.Item(cellCount)) = strTempValue 
ErrorHandler:
                    If (Err.Number <> 0) Then
                            Sheets(strDestinationSheetName).Range(cellCollection.Item(cellCount)) = BackUp
                        Exit For
                    End If
                Next cellCount
            Next intWorkBookCount
        End With

    End Sub

    Function GetCellsFromRange(RangeInScope As String) As Collection
        Dim startCell As String
        Dim endCell As String
        Dim intStartColumn As Integer
        Dim intEndColumn As Integer
        Dim intStartRow As Integer
        Dim intEndRow As Integer
        Dim coll As New Collection

        startCell = Left(RangeInScope, InStr(RangeInScope, ":") - 1)
        endCell = Right(RangeInScope, Len(RangeInScope) - InStr(RangeInScope, ":"))
        intStartColumn = Range(startCell).Column
        intEndColumn = Range(endCell).Column
        intStartRow = Range(startCell).Row
        intEndRow = Range(endCell).Row

        For lngColumnCount = intStartColumn To intEndColumn
            For lngRowCount = intStartRow To intEndRow
                coll.Add (Cells(lngRowCount, lngColumnCount).Address(RowAbsolute:=False, ColumnAbsolute:=False))
            Next lngRowCount
        Next lngColumnCount

        Set GetCellsFromRange = coll
    End Function

    Function GetData(FileFullPath As String, SheetName As String, CellInScope As String) As String
        Dim Path As String
        Dim FileName As String
        Dim strFinalValue As String
        Dim doesSheetExist As Boolean

        Path = FileFullPath
        Path = StrReverse(Path)
        FileName = StrReverse(Left(Path, InStr(Path, "\") - 1))
        Path = StrReverse(Right(Path, Len(Path) - InStr(Path, "\") + 1))

        strFinalValue = "='" & Path & "[" & FileName & "]" & SheetName & "'!" & CellInScope
        GetData = strFinalValue
    End Function

I had exact same error message with IIS10 and Windows 10. I tried everything listed here (and other internet pages as well) but it did not fixed it. What solved the issue was to install .NET Core Hosting a second time (I choose "Repair" button).

I'm 100% confident this is what fixed it because I had to deploy the same website to other laptops as well (different brands but all Windows 10). The same error message (500.19) occurred and reinstalling bundle fixed it again.

If you use docker in your dev you can do this in another shell: docker attach running_node_app_container_name

That will show you STDOUT and STDERR.

Update: text-overflow: ellipsis is now supported as of Firefox 7 (released September 27th 2011). Yay! My original answer follows as a historical record.

Justin Maxwell has cross browser CSS solution. It does come with the downside however of not allowing the text to be selected in Firefox. Check out his guest post on Matt Snider's blog for the full details on how this works.

Note this technique also prevents updating the content of the node in JavaScript using the innerHTML property in Firefox. See the end of this post for a workaround.

CSS

.ellipsis {
    white-space: nowrap;
    overflow: hidden;
    text-overflow: ellipsis;
    -o-text-overflow: ellipsis;
    -moz-binding: url('assets/xml/ellipsis.xml#ellipsis');
}

ellipsis.xml file contents

<?xml version="1.0"?>
<bindings
  xmlns="http://www.mozilla.org/xbl"
  xmlns:xbl="http://www.mozilla.org/xbl"
  xmlns:xul="http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"
>
    <binding id="ellipsis">
        <content>
            <xul:window>
                <xul:description crop="end" xbl:inherits="value=xbl:text"><children/></xul:description>
            </xul:window>
        </content>
    </binding>
</bindings>

Updating node content

To update the content of a node in a way that works in Firefox use the following:

var replaceEllipsis(node, content) {
    node.innerHTML = content;
    // use your favorite framework to detect the gecko browser
    if (YAHOO.env.ua.gecko) {
        var pnode = node.parentNode,
            newNode = node.cloneNode(true);

        pnode.replaceChild(newNode, node);
    }
};

See Matt Snider's post for an explanation of how this works.

Another info: If you want use a Route Constraint, imagine that you want force that parameter has int datatype, then you need use this syntax:

[Route("v1/location/**{deviceOrAppid:int?}**", Name = "AddNewLocation")]

The ? character is put always before the last } character

For more information see: Optional URI Parameters and Default Values

I was able to get it to work by following these instructions.

• Download the sample code

• Unzip it to a new location

• Open ~\tesseract-samples-master\src\Tesseract.Samples.sln (I used Visual Studio 2017)

• Install the Tesseract NuGet package for that project (or uninstall/reinstall as I had to)

• Uncomment the last two meaningful lines in Tesseract.Samples.Program.cs: Console.Write("Press any key to continue . . . "); Console.ReadKey(true);

• Run (hit F5)

• You should get this windows console output

Swift 3.0 //Dismiss View Controller in swift

self.navigationController?.popViewController(animated: true)
dismiss(animated: true, completion: nil)

If notepad is already started, you should write:

// import the function in your class
[DllImport ("User32.dll")]
static extern int SetForegroundWindow(IntPtr point);

//...

Process p = Process.GetProcessesByName("notepad").FirstOrDefault();
if (p != null)
{
    IntPtr h = p.MainWindowHandle;
    SetForegroundWindow(h);
    SendKeys.SendWait("k");
}

GetProcessesByName returns an array of processes, so you should get the first one (or find the one you want).

If you want to start notepad and send the key, you should write:

Process p = Process.Start("notepad.exe");
p.WaitForInputIdle();
IntPtr h = p.MainWindowHandle;
SetForegroundWindow(h);
SendKeys.SendWait("k");

The only situation in which the code may not work is when notepad is started as Administrator and your application is not.

I found the best solution after many attempts for this problem.

youtube-dl --ignore-errors --format bestaudio --extract-audio --audio-format mp3 --audio-quality 160K --output "%(title)s.%(ext)s" --yes-playlist https://www.youtube.com/playlist?list={your-youtube-playlist-id}

If by "restart", you mean to start a new 4 second interval at this moment, then you must stop and restart the timer.

function myFn() {console.log('idle');}

var myTimer = setInterval(myFn, 4000);

// Then, later at some future time, 
// to restart a new 4 second interval starting at this exact moment in time
clearInterval(myTimer);
myTimer = setInterval(myFn, 4000);

You could also use a little timer object that offers a reset feature:

function Timer(fn, t) {
    var timerObj = setInterval(fn, t);

    this.stop = function() {
        if (timerObj) {
            clearInterval(timerObj);
            timerObj = null;
        }
        return this;
    }

    // start timer using current settings (if it's not already running)
    this.start = function() {
        if (!timerObj) {
            this.stop();
            timerObj = setInterval(fn, t);
        }
        return this;
    }

    // start with new or original interval, stop current interval
    this.reset = function(newT = t) {
        t = newT;
        return this.stop().start();
    }
}

Usage:

var timer = new Timer(function() {
    // your function here
}, 5000);


// switch interval to 10 seconds
timer.reset(10000);

// stop the timer
timer.stop();

// start the timer
timer.start();

Working demo: https://jsfiddle.net/jfriend00/t17vz506/

Using <summary> and <details>

Using <summary> and <details> elements is the simplest but see browser support as current IE is not supporting it. You can polyfill though (most are jQuery-based). Do note that unsupported browser will simply show the expanded version of course, so that may be acceptable in some cases.

/* Optional styling */_x000D_
summary::-webkit-details-marker {_x000D_
  color: blue;_x000D_
}_x000D_
summary:focus {_x000D_
  outline-style: none;_x000D_
}

<details>_x000D_
  <summary>Summary, caption, or legend for the content</summary>_x000D_
  Content goes here._x000D_
</details>

See also how to style the <details> element (HTML5 Doctor) (little bit tricky).

Pure CSS3

The :target selector has a pretty good browser support, and it can be used to make a single collapsible element within the frame.

.details,_x000D_
.show,_x000D_
.hide:target {_x000D_
  display: none;_x000D_
}_x000D_
.hide:target + .show,_x000D_
.hide:target ~ .details {_x000D_
  display: block;_x000D_
}

<div>_x000D_
  <a id="hide1" href="#hide1" class="hide">+ Summary goes here</a>_x000D_
  <a id="show1" href="#show1" class="show">- Summary goes here</a>_x000D_
  <div class="details">_x000D_
    Content goes here._x000D_
  </div>_x000D_
</div>_x000D_
<div>_x000D_
  <a id="hide2" href="#hide2" class="hide">+ Summary goes here</a>_x000D_
  <a id="show2" href="#show2" class="show">- Summary goes here</a>_x000D_
  <div class="details">_x000D_
    Content goes here._x000D_
  </div>_x000D_
</div>

You should use window.history and return a false so that the href is not navigated by the browser ( the default behavior ).

<a href="www.mypage.com" onclick="window.history.go(-1); return false;"> Link </a>

In Angular, there is the support elvis operator ?. to protect against a view render failure. They call it the safe navigation operator. Take the example below:

The current person name is {{nullObject?.name}}

Since it is trying to access name property of a null value, the whole view disappears and you can see the error inside the browser console. It works perfectly with long property paths such as a?.b?.c?.d. So I recommend you to use it everytime you need to access a property inside a template.

I've used HttpClient in .NET 4.0 applications on numerous occasions. If you are familiar with NuGet, you can do an Install-Package Microsoft.Net.Http to add it to your project. See the link below for further details.

http://nuget.org/packages/Microsoft.Net.Http

According to Key Bindings for Visual Studio Code there's:

Ctrl+Shift+L to select all occurrences of current selection

and

Ctrl+F2 to select all occurrences of current word

You can view the currently active keyboard shortcuts in VS Code in the Command Palette (View -> Command Palette) or in the Keyboard Shortcuts editor (File > Preferences > Keyboard Shortcuts).

select year(current_timestamp)

SQLFiddle demo

@Giuseppe, you may want to consider this for a flexible specification of the plots arrangement (modified from here):

library(ggplot2)
library(gridExtra)
library(grid)

grid_arrange_shared_legend <- function(..., nrow = 1, ncol = length(list(...)), position = c("bottom", "right")) {

  plots <- list(...)
  position <- match.arg(position)
  g <- ggplotGrob(plots[[1]] + theme(legend.position = position))$grobs
  legend <- g[[which(sapply(g, function(x) x$name) == "guide-box")]]
  lheight <- sum(legend$height)
  lwidth <- sum(legend$width)
  gl <- lapply(plots, function(x) x + theme(legend.position = "none"))
  gl <- c(gl, nrow = nrow, ncol = ncol)

  combined <- switch(position,
                     "bottom" = arrangeGrob(do.call(arrangeGrob, gl),
                                            legend,
                                            ncol = 1,
                                            heights = unit.c(unit(1, "npc") - lheight, lheight)),
                     "right" = arrangeGrob(do.call(arrangeGrob, gl),
                                           legend,
                                           ncol = 2,
                                           widths = unit.c(unit(1, "npc") - lwidth, lwidth)))
  grid.newpage()
  grid.draw(combined)

}

Extra arguments nrow and ncol control the layout of the arranged plots:

dsamp <- diamonds[sample(nrow(diamonds), 1000), ]
p1 <- qplot(carat, price, data = dsamp, colour = clarity)
p2 <- qplot(cut, price, data = dsamp, colour = clarity)
p3 <- qplot(color, price, data = dsamp, colour = clarity)
p4 <- qplot(depth, price, data = dsamp, colour = clarity)
grid_arrange_shared_legend(p1, p2, p3, p4, nrow = 1, ncol = 4)
grid_arrange_shared_legend(p1, p2, p3, p4, nrow = 2, ncol = 2)

It looks like you're just missing an opening double-quote. Try:

if Verbose:
   print("Building internam Index for %d tile(s) ..." % len(inputTiles), end=' ')

I think a better question is, why in a case where you're evaluating a boolean set of return values, would you NOT use true/false? I mean, you could probably have true/null, true/-1, other misc. Javascript "falsy" values to substitute, but why would you do that?

To install only from local you need 2 options:

• --find-links: where to look for dependencies. There is no need for the file:// prefix mentioned by others.
• --no-index: do not look in pypi indexes for missing dependencies (dependencies not installed and not in the --find-links path).

So you could run from any folder the following:

pip install --no-index --find-links /srv/pkg /path/to/mypackage-0.1.0.tar.gz

If your mypackage is setup properly, it will list all its dependencies, and if you used pip download to download the cascade of dependencies (ie dependencies of depencies etc), everything will work.

If you want to use the pypi index if it is accessible, but fallback to local wheels if not, you can remove --no-index and add --retries 0. You will see pip pause for a bit while it is try to check pypi for a missing dependency (one not installed) and when it finds it cannot reach it, will fall back to local. There does not seem to be a way to tell pip to "look for local ones first, then the index".

'SET' is forgotten

ALTER TABLE ONLY users ALTER COLUMN lang SET DEFAULT 'en_GB';

This could be used if you want to check that object is instance of List<T>, which is not empty:

if(object instanceof List){
    if(((List)object).size()>0 && (((List)object).get(0) instanceof MyObject)){
        // The object is of List<MyObject> and is not empty. Do something with it.
    }
}

the ideal way is to

{{ something|safe }}

than completely turning off auto escaping.

You can convert the value to a date using a formula like this, next to the cell:

=DATE(LEFT(A1,4),MID(A1,5,2),RIGHT(A1,2))

Where A1 is the field you need to convert.

Alternatively, you could use this code in VBA:

Sub ConvertYYYYMMDDToDate()
   Dim c As Range
   For Each c In Selection.Cells
       c.Value = DateSerial(Left(c.Value, 4), Mid(c.Value, 5, 2), Right(c.Value, 2))
       'Following line added only to enforce the format.
       c.NumberFormat = "mm/dd/yyyy"
   Next
End Sub

Just highlight any cells you want fixed and run the code.

Note as RJohnson mentioned in the comments, this code will error if one of your selected cells is empty. You can add a condition on c.value to skip the update if it is blank.

I use date.js. It handles this easily and takes care of all the leap-year nastiness.

The above works,(having an original document with mixed pages of 11' and 16' wide). However auto rotate needs to be off otherwise landscape pages are saved with page white top and bottom, so dont work in full screen view.

Solution is to re open the new PDF in acrobat and crop the first image (carefully to avoid white border), then select page range i.e. all, this then applies to all pages. job done !

I hade a csv file named FAR_T_SNSA.csv that i wanted to import in oracle database directly. For this i have done the following steps and it worked absolutely fine. Here are the steps that u vand follow out:

HOW TO IMPORT CSV FILE IN ORACLE DATABASE ?

1. Get a .csv format file that is to be imported in oracle database. Here this is named “FAR_T_SNSA.csv”

2. Create a table in sql with same column name as there were in .csv file. create table Billing ( iocl_id char(10), iocl_consumer_id char(10));

3. Create a Control file that contains sql*loder script. In notepad type the script as below and save this with .ctl extension, in selecting file type as All Types(*). Here control file is named as Billing. And the Script is as Follows:

   LOAD DATA
   INFILE 'D:FAR_T_SNSA.csv'
   INSERT INTO TABLE Billing
   FIELDS TERMINATED BY ',' OPTIONALLY ENCLOSED BY '"'
   TRAILING NULLCOLS
   (
   iocl_id,
   iocl_consumer_id
   )
   

4. Now in Command prompt run command:

   Sqlldr UserId/Password
   Control = “ControlFileName” 
   --------------------------------
   Here ControlFileName is Billing.
   

If you want to generate a number from 0 to 100, then your code would look like this:

(int)(Math.random() * 101);

To generate a number from 10 to 20 :

(int)(Math.random() * 11 + 10);

In the general case:

(int)(Math.random() * ((upperbound - lowerbound) + 1) + lowerbound);

(where lowerbound is inclusive and upperbound exclusive).

The inclusion or exclusion of upperbound depends on your choice. Let's say range = (upperbound - lowerbound) + 1 then upperbound is inclusive, but if range = (upperbound - lowerbound) then upperbound is exclusive.

Example: If I want an integer between 3-5, then if range is (5-3)+1 then 5 is inclusive, but if range is just (5-3) then 5 is exclusive.

private void showImage(ImageView img, String absolutePath) {
  
    BitmapFactory.Options options = new BitmapFactory.Options();
    options.inSampleSize = 8;
    Bitmap bitmapPicture = BitmapFactory.decodeFile(absolutePath);
    img.setImageBitmap(bitmapPicture);

}

You must use the global declaration when you wish to alter the value assigned to a global variable.

You do not need it to read from a global variable. Note that calling a method on an object (even if it alters the data within that object) does not alter the value of the variable holding that object (absent reflective magic).

If you want to check if a string is a number (I'm assuming it's a string since if it's a number, duh, you know it's one).

• Without regex and
• using Microsoft's code as much as possible

you could also do:

public static bool IsNumber(this string aNumber)
{
     BigInteger temp_big_int;
     var is_number = BigInteger.TryParse(aNumber, out temp_big_int);
     return is_number;
}

This will take care of the usual nasties:

• Minus (-) or Plus (+) in the beginning
• contains decimal character BigIntegers won't parse numbers with decimal points. (So: BigInteger.Parse("3.3") will throw an exception, and TryParse for the same will return false)
• no funny non-digits
• covers cases where the number is bigger than the usual use of Double.TryParse

You'll have to add a reference to System.Numerics and have using System.Numerics; on top of your class (well, the second is a bonus I guess :)

Unpack the source from a working directory and cd into the file directory as root. Use the commands ./configure then make and make install

Emulation may seem daunting but is actually quite easier than simulating.

Any processor typically has a well-written specification that describes states, interactions, etc.

If you did not care about performance at all, then you could easily emulate most older processors using very elegant object oriented programs. For example, an X86 processor would need something to maintain the state of registers (easy), something to maintain the state of memory (easy), and something that would take each incoming command and apply it to the current state of the machine. If you really wanted accuracy, you would also emulate memory translations, caching, etc., but that is doable.

In fact, many microchip and CPU manufacturers test programs against an emulator of the chip and then against the chip itself, which helps them find out if there are issues in the specifications of the chip, or in the actual implementation of the chip in hardware. For example, it is possible to write a chip specification that would result in deadlocks, and when a deadline occurs in the hardware it's important to see if it could be reproduced in the specification since that indicates a greater problem than something in the chip implementation.

Of course, emulators for video games usually care about performance so they don't use naive implementations, and they also include code that interfaces with the host system's OS, for example to use drawing and sound.

Considering the very slow performance of old video games (NES/SNES, etc.), emulation is quite easy on modern systems. In fact, it's even more amazing that you could just download a set of every SNES game ever or any Atari 2600 game ever, considering that when these systems were popular having free access to every cartridge would have been a dream come true.

It means that there is only one instance of "clock" in Hello, not one per each separate instance of the "Hello" class, or more-so, it means that there will be one commonly shared "clock" reference among all instances of the "Hello" class.

So if you were to do a "new Hello" anywhere in your code: A- in the first scenario (before the change, without using "static"), it would make a new clock every time a "new Hello" is called, but B- in the second scenario (after the change, using "static"), every "new Hello" instance would still share and use the initial and same "clock" reference first created.

Unless you needed "clock" somewhere outside of main, this would work just as well:

package hello;
public class Hello
{
    public static void main(String args[])
    {
      Clock clock=new Clock();
      clock.sayTime();    
    }
}

Custom made :) you can use dropdown hori/vertical offset properties to position the list currently, also try android:spinnerMode="dialog" it is cooler.

Layout

  <LinearLayout
        android:layout_marginBottom="20dp"
        android:layout_width="match_parent"
        android:layout_height="wrap_content"
        android:orientation="horizontal">
        <AutoCompleteTextView
            android:layout_weight="1"
            android:id="@+id/edit_ip"
            android:text="default value"
            android:layout_width="0dp"
            android:layout_height= "wrap_content"/>
        <Spinner
            android:layout_marginRight="20dp"
            android:layout_width="30dp"
            android:layout_height="50dp"
            android:id="@+id/spinner_ip"
            android:spinnerMode="dropdown"
            android:entries="@array/myarray"/>
 </LinearLayout>

Java

          //set auto complete
        final AutoCompleteTextView textView = (AutoCompleteTextView) findViewById(R.id.edit_ip);
        ArrayAdapter<String> adapter = new ArrayAdapter<String>(this, android.R.layout.simple_dropdown_item_1line, getResources().getStringArray(R.array.myarray));
        textView.setAdapter(adapter);
        //set spinner
        final Spinner spinner = (Spinner) findViewById(R.id.spinner_ip);
        spinner.setOnItemSelectedListener(new AdapterView.OnItemSelectedListener() {
            @Override
            public void onItemSelected(AdapterView<?> parent, View view, int position, long id) {
                textView.setText(spinner.getSelectedItem().toString());
                textView.dismissDropDown();
            }
            @Override
            public void onNothingSelected(AdapterView<?> parent) {
                textView.setText(spinner.getSelectedItem().toString());
                textView.dismissDropDown();
            }
        });

res/values/string

<string-array name="myarray">
    <item>value1</item>
    <item>value2</item>
</string-array>

Was that useful??

1. Verify current version of PHP Type in the following to see the current PHP version:

   php -v

   Should output something like:

   PHP 5.3.3 (cli) (built: Jul 9 2015 17:39:00) Copyright (c) 1997-2010 The PHP Group Zend Engine v2.3.0, Copyright (c) 1998-2010 Zend Technologies

2. Install the Remi and EPEL RPM repositories

If you haven’t already done so, install the Remi and EPEL repositories

wget https://dl.fedoraproject.org/pub/epel/epel-release-latest-6.noarch.rpm && rpm -Uvh epel-release-latest-6.noarch.rpm



wget http://rpms.famillecollet.com/enterprise/remi-release-6.rpm && rpm -Uvh remi-release-6*.rpm

Enable the REMI repository globally:

nano /etc/yum.repos.d/remi.repo

Under the section that looks like [remi] make the following changes:

[remi]
name=Remi's RPM repository for Enterprise Linux 6 - $basearch
#baseurl=http://rpms.remirepo.net/enterprise/6/remi/$basearch/
mirrorlist=http://rpms.remirepo.net/enterprise/6/remi/mirror
enabled=1
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-remi

Also, under the section that looks like [remi-php55] make the following changes:

[remi-php56]
name=Remi's PHP 5.6 RPM repository for Enterprise Linux 6 - $basearch
#baseurl=http://rpms.remirepo.net/enterprise/6/php56/$basearch/
mirrorlist=http://rpms.remirepo.net/enterprise/6/php56/mirror
# WARNING: If you enable this repository, you must also enable "remi"
enabled=1
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-remi

Type CTRL-O to save and CTRL-X to close the editor

3. Upgrade PHP 5.3 to PHP 5.6 Now we can upgrade PHP. Simply type in the following command:

   yum -y upgrade php*

Once the update has completed, let’s verify that you have PHP 5.6 installed:

php -v

Should see output similar to the following:

PHP 5.6.14 (cli) (built: Sep 30 2015 14:07:43) 
Copyright (c) 1997-2015 The PHP Group
Zend Engine v2.6.0, Copyright (c) 1998-2015 Zend Technologies

typeof is an operator to obtain a type known at compile-time (or at least a generic type parameter). The operand of typeof is always the name of a type or type parameter - never an expression with a value (e.g. a variable). See the C# language specification for more details.

GetType() is a method you call on individual objects, to get the execution-time type of the object.

Note that unless you only want exactly instances of TextBox (rather than instances of subclasses) you'd usually use:

if (myControl is TextBox)
{
    // Whatever
}

Or

TextBox tb = myControl as TextBox;
if (tb != null)
{
    // Use tb
}

Since the syntaxes are equivalent (in MySQL anyhow), I prefer the INSERT INTO table SET x=1, y=2 syntax, since it is easier to modify and easier to catch errors in the statement, especially when inserting lots of columns. If you have to insert 10 or 15 or more columns, it's really easy to mix something up using the (x, y) VALUES (1,2) syntax, in my opinion.

If portability between different SQL standards is an issue, then maybe INSERT INTO table (x, y) VALUES (1,2) would be preferred.

And if you want to insert multiple records in a single query, it doesn't seem like the INSERT INTO ... SET syntax will work, whereas the other one will. But in most practical cases, you're looping through a set of records to do inserts anyhow, though there could be some cases where maybe constructing one large query to insert a bunch of rows into a table in one query, vs. a query for each row, might have a performance improvement. Really don't know.

If dgv(11, dgv.CurrentRow.Index).Selected = True Then
    dgv.Rows.RemoveAt(dgv.CurrentRow.Index)
Else
    Exit Sub
End If

If concerned about schema changes this might work for you: 1. Run a 'DESCRIBE table' query on all tables involved. 2. Use the returned field names to dynamically construct a string of column names prefixed with your chosen alias.

For ExpressJs router:

router.post('/login', async(req, res) => {
    return res.send({redirect: '/yoururl'});
})

Client-side:

    success: function (response) {
        if (response.redirect) {
            window.location = response.redirect
        }
    },

If you are having a code structure of something like:

SELECT 151
RETURN -151

Then use:

SELECT 151
ROLLBACK
RETURN -151

According to the manual, in CPython id() is the actual memory address of the variable. If you want it in hex format, call hex() on it.

x = 5
print hex(id(x))

this will print the memory address of x.

For this (and most plotting) I would not rely on the Pandas wrappers to matplotlib. Instead, just use matplotlib directly:

import matplotlib.pyplot as plt
plt.scatter(df['col_name_1'], df['col_name_2'])
plt.show() # Depending on whether you use IPython or interactive mode, etc.

and remember that you can access a NumPy array of the column's values with df.col_name_1.values for example.

I ran into trouble using this with Pandas default plotting in the case of a column of Timestamp values with millisecond precision. In trying to convert the objects to datetime64 type, I also discovered a nasty issue: < Pandas gives incorrect result when asking if Timestamp column values have attr astype >.

If the sites are on separate domains, the calling page can't access the height of the iframe due to cross-browser domain restrictions. If you have access to both sites, you may be able to use the [document domain hack].1 Then anroesti's links should help.

If you have Ruby(1.9+)

ruby -e 'Dir["*"].each{|x| File.rename(x,"PRE_"+x) }'

There are two ways you can do this. One is the one already mentioned, i.e.:

php -f filename.php

The second option is making the script executable (chmod +x filename.php) and adding the following line to the top of your .php file:

#!/path/to/php

I'm not sure though if a webserver likes this, so if you also want to use the .php file in a website, that might not be the best idea. Still, if you're just writing some kind of script, it is easier to type ./path/to/phpfile.php than having to type php -f /path/to/phpfile.php every time.

Believe me, I've tried so hard to find a decent IDE for Android developement but I failed. I used Visual Studio for many years, and it is so hard for me to get use to the way Eclipse doing things.

However, the new IntelliJ supports for Android development, it's the closest you can get.

Assign position:relative to .outside, and then position:absolute; bottom:0; to your .inside.

Like so:

.outside {
    position:relative;
}
.inside {
    position: absolute;
    bottom: 0;
}

find ./ -type f -name "*.php" -o -name "*.html" -printf '%P\n' |xargs tar -I 'pigz -9' -cf target.tgz

for multicore or just for one core:

find ./ -type f -name "*.php" -o -name "*.html" -printf '%P\n' |xargs tar -czf target.tgz

I have found something strange here about word-wrap only works with width property of CSS properly.

#ONLYwidth {_x000D_
  width: 200px;_x000D_
}_x000D_
_x000D_
#wordwrapWITHOUTWidth {_x000D_
  word-wrap: break-word;_x000D_
}_x000D_
_x000D_
#wordwrapWITHWidth {_x000D_
  width: 200px;_x000D_
  word-wrap: break-word;_x000D_
}

<b>This is the example of word-wrap only using width property</b>_x000D_
<p id="ONLYwidth">827938828ey823876te37257e5t328er6367r5erd663275e65r532r6s3624e5645376er563rdr753624e544341763r567r4e56r326r5632r65sr32dr32udr56r634r57rd63725</p>_x000D_
<br/>_x000D_
<b>This is the example of word-wrap without width property</b>_x000D_
<p id="wordwrapWITHOUTWidth">827938828ey823876te37257e5t328er6367r5erd663275e65r532r6s3624e5645376er563rdr753624e544341763r567r4e56r326r5632r65sr32dr32udr56r634r57rd63725</p>_x000D_
<br/>_x000D_
<b>This is the example of word-wrap with width property</b>_x000D_
<p id="wordwrapWITHWidth">827938828ey823876te37257e5t328er6367r5erd663275e65r532r6s3624e5645376er563rdr753624e544341763r567r4e56r326r5632r65sr32dr32udr56r634r57rd63725</p>

Here is a working demo that I have prepared about it. http://jsfiddle.net/Hss5g/2/

Username you get like this:

var userName = HttpContext.Current.Request.LogonUserIdentity?.Name;

Despite the existence of =begin and =end, the normal and a more correct way to comment is to use #'s on each line. If you read the source of any ruby library, you will see that this is the way multi-line comments are done in almost all cases.

A Unix timestamp is simply the number of seconds since January the first 1970, so to add 24 hours to a Unix timestamp we just add the number of seconds in 24 hours. (24 * 60 *60)

time() + 24*60*60;

let MAX : UInt32 = 9
let MIN : UInt32 = 1 
func randomNumber()
{
   var random_number = Int(arc4random_uniform(MAX) + MIN)
   print ("random = ", random_number);    
}

$.ajax({
    dataType: "json",
    type: "POST",
    url: "/Home/AutocompleteID",
    data: data,
    success: function (data) {
        $('#search').html('');
        $('#search').append(data[0].Scheme_Code);
        $('#search').append(data[0].Scheme_Name);
    }
});

You should define the __unicode__ method on your model, and the template will call it automatically when you reference the instance.

This option was introduced in order to remove the need to deploy very large PIAs (Primary Interop Assemblies) for interop.

It simply embeds the managed bridging code used that allows you to talk to unmanaged assemblies, but instead of embedding it all it only creates the stuff you actually use in code.

Read more in Scott Hanselman's blog post about it and other VS improvements here.

As for whether it is advised or not, I'm not sure as I don't need to use this feature. A quick web search yields a few leads:

• Check your Embed Interop Types flag when doing Visual Studio extensibility work
• The Pain of deploying Primary Interop Assemblies

The only risk of turning them all to false is more deployment concerns with PIA files and a larger deployment if some of those files are large.

There are a few options available for you depending on the library in question, how it's written, and what level of accuracy you're looking for. Let's review the options, in roughly descending order of desirability.

Maybe It Exists Already

Always check DefinitelyTyped (https://github.com/DefinitelyTyped/DefinitelyTyped) first. This is a community repo full of literally thousands of .d.ts files and it's very likely the thing you're using is already there. You should also check TypeSearch (https://microsoft.github.io/TypeSearch/) which is a search engine for NPM-published .d.ts files; this will have slightly more definitions than DefinitelyTyped. A few modules are also shipping their own definitions as part of their NPM distribution, so also see if that's the case before trying to write your own.

Maybe You Don't Need One

TypeScript now supports the --allowJs flag and will make more JS-based inferences in .js files. You can try including the .js file in your compilation along with the --allowJs setting to see if this gives you good enough type information. TypeScript will recognize things like ES5-style classes and JSDoc comments in these files, but may get tripped up if the library initializes itself in a weird way.

Get Started With --allowJs

If --allowJs gave you decent results and you want to write a better definition file yourself, you can combine --allowJs with --declaration to see TypeScript's "best guess" at the types of the library. This will give you a decent starting point, and may be as good as a hand-authored file if the JSDoc comments are well-written and the compiler was able to find them.

Get Started with dts-gen

If --allowJs didn't work, you might want to use dts-gen (https://github.com/Microsoft/dts-gen) to get a starting point. This tool uses the runtime shape of the object to accurately enumerate all available properties. On the plus side this tends to be very accurate, but the tool does not yet support scraping the JSDoc comments to populate additional types. You run this like so:

npm install -g dts-gen
dts-gen -m <your-module>

This will generate your-module.d.ts in the current folder.

Hit the Snooze Button

If you just want to do it all later and go without types for a while, in TypeScript 2.0 you can now write

declare module "foo";

which will let you import the "foo" module with type any. If you have a global you want to deal with later, just write

declare const foo: any;

which will give you a foo variable.

This is a more idiomatic alternative to the artificial state variable solutions:

$("#button_id").one('click', DoSomething);

function DoSomething() {
  // do something.

  $("#button_id").one('click', DoSomething);
}

One will only execute once (until attached again). More info here: http://docs.jquery.com/Events/one

The catch without any arguments is simply eating the exception and is of no use. What if a fatal error occurs? There's no way to know what happened if you use catch without argument.

A catch statement should catch more specific Exceptions like FileNotFoundException and then at the very end you should catch Exception which would catch any other exception and log them.

Well, although it's not actually possible to change the title attribute, it is possible to show a tooltip completely from css. You can check a working version out at http://jsfiddle.net/HzH3Z/5/.

What you can do is style the label:after selector and give it display:none, and set it's content from css. You can then change the display attribute to display:block on label:hover:after, and it will show. Like this:

label:after{
    content: "my tooltip";
    padding: 2px;
    display:none;
    position: relative;
    top: -20px;
    right: -30px;
    width: 150px;
    text-align: center;
    background-color: #fef4c5;
    border: 1px solid #d4b943;
    -moz-border-radius: 2px;
    -webkit-border-radius: 2px;
    -ms-border-radius: 2px;
    border-radius: 2px;
}
label:hover:after{
    display: block;
}

What do you want to do with the attribute? Is it an html attribute or something of your own?

Most of the time you can simply address it as a property: want to set a title on an element? element.title = "foo" will do it.

For your own custom JS attributes the DOM is naturally extensible (aka expando=true), the simple upshot of which is that you can do element.myCustomFlag = foo and subsequently read it without issue.

Use the method bellow to remove the contents of a directory, not the directory itself:

import os
import shutil

def remove_contents(path):
    for c in os.listdir(path):
        full_path = os.path.join(path, c)
        if os.path.isfile(full_path):
            os.remove(full_path)
        else:
            shutil.rmtree(full_path)

Try the strict equality comparison:

if(1 === true)
    document.write("oh!!! that's true");  //**this is not displayed**

The == operator does conversion from one type to another, the === operator doesn't.

I prefer this:

public enum Color {

   White,

   Green,

   Blue,

   Purple,

   Orange,

   Red
}

then:

//cast enum to int
int color = Color.Blue.ordinal();

The accepted answer is deprecated in version 28 so here is the solution that I am using in my project.

Returns connection type. false: no Internet Connection; true: mobile data || wifi

public static boolean isNetworkConnected(Context context) { 
    boolean result = false; 
    ConnectivityManager cm = (ConnectivityManager) context.getSystemService(Context.CONNECTIVITY_SERVICE);
    if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.M) {
        if (cm != null) {
            NetworkCapabilities capabilities = cm.getNetworkCapabilities(cm.getActiveNetwork());
            if (capabilities != null) {
                if (capabilities.hasTransport(NetworkCapabilities.TRANSPORT_WIFI)) {
                    result = true;
                } else if (capabilities.hasTransport(NetworkCapabilities.TRANSPORT_CELLULAR)) {
                    result = true;
                }
            }
        }
    } else {
        if (cm != null) {
            NetworkInfo activeNetwork = cm.getActiveNetworkInfo();
            if (activeNetwork != null) {
                // connected to the internet
                if (activeNetwork.getType() == ConnectivityManager.TYPE_WIFI) {
                    result = true;
                } else if (activeNetwork.getType() == ConnectivityManager.TYPE_MOBILE) {
                    result = true;
                }
            }
        }
    }
    return result;
}

You should add the code in project level gradle file for generating apk overwriting over errors

To do without reinstalling spyder in all environments follow official reference here.

In summary (tested with conda):

• Spyder should be installed in the base environment

From the system prompt:

• Create an new environment. Note that depending on how you create it (conda, virtualenv) the environment folder will be located at different place on your system)

• Activate the environment (e.g., conda activate [yourEnvName])

• Install spyder-kernels inside the environment (e.g., conda install spyder-kernels)

• Find and copy the path for the python executable inside the environment. Finding this path can be done using from the prompt this command python -c "import sys; print(sys.executable)"

• Deactivate the environment (i.e., return to base conda deactivate)

• run spyder (spyder3)

• Finally in spyder Tool menu go to Preferences > Python Interpreter > Use the following interpreter and paste the environment python executable path

• Restart the ipython console

PS: in spyder you should see at the bottom something like this

Voila

plt.axis('off')
plt.savefig(file_path, bbox_inches="tight", pad_inches = 0)

plt.savefig has those options in itself, just need to set axes off before

For xml formatted with attributes...

data.xml:

<building_data>
<building address="some address" lat="28.902914" lng="-71.007235" />
<building address="some address" lat="48.892342" lng="-75.0423423" />
<building address="some address" lat="58.929753" lng="-79.1236987" />
</building_data>

php code:

$reader = new XMLReader();

if (!$reader->open("data.xml")) {
    die("Failed to open 'data.xml'");
}

while($reader->read()) {
  if ($reader->nodeType == XMLReader::ELEMENT && $reader->name == 'building') {
    $address = $reader->getAttribute('address');
    $latitude = $reader->getAttribute('lat');
    $longitude = $reader->getAttribute('lng');
}

$reader->close();

A good solution that can work is go to files > and check the reallocate all files

[i for i in enumerate(['a','b','c'])]

Result:

[(0, 'a'), (1, 'b'), (2, 'c')]

As you've tagged this jQuery ...

First, put IDs on your input buttons and remove the inline handlers:

<input type="number" id="input" />
<input type="button" id="stop" value="stop"/>
<input type="button" id="start" value="start"/>

Then keep all of your state and functions encapsulated in a closure:

EDIT updated for a cleaner implementation, that also addresses @Esailija's concerns about use of setInterval().

$(function() {
    var timer = null;
    var input = document.getElementById('input');

    function tick() {
        ++input.value;
        start();        // restart the timer
    };

    function start() {  // use a one-off timer
        timer = setTimeout(tick, 1000);
    };

    function stop() {
        clearTimeout(timer);
    };

    $('#start').bind("click", start); // use .on in jQuery 1.7+
    $('#stop').bind("click", stop);

    start();  // if you want it to auto-start
});

This ensures that none of your variables leak into global scope, and can't be modified from outside.

(Updated) working demo at http://jsfiddle.net/alnitak/Q6RhG/

It's the same way you run it from command line. Just put that "command line" into a ".bat" file.

So, if you use java -cp .;foo.jar Bar, put that into a .bat file as

@echo off

java -cp .;foo.jar Bar

Also, mod can be used like this:

int a = 7;
b = a % 2;

b would equal 1. Because 7 % 2 = 1.

Requests does not currently support asyncio and there are no plans to provide such support. It's likely that you could implement a custom "Transport Adapter" (as discussed here) that knows how to use asyncio.

If I find myself with some time it's something I might actually look into, but I can't promise anything.

This will update all the rows in that columns if safe mode is not enabled.

UPDATE table SET columnB = columnA;

If safe mode is enabled then you will need to use a where clause. I use primary key as greater than 0 basically all will be updated

UPDATE table SET columnB = columnA where table.column>0;

Just right click the Project -- Properties and select Resource on the left side menu.

You can now change the Text-file encoding to whatever you wish.

Change Minute to be 0. That's it :)

Note: you can check your "crons" in http://cronchecker.net/

Example

git diff master...feature

shows all the new commits of your current (possibly multi-commit) feature branch.

man git-diff documents that:

git diff A...B

is the same as:

git diff $(git merge-base A B) B

but the ... is easier to type and remember.

As mentioned by Dave, the special case of HEAD can be omitted. So:

git diff master...HEAD

is the same as:

git diff master...

which is enough if the current branch is feature.

Finally, remember that order matters! Doing git diff feature...master will show changes that are on master not on feature.

I wish more git commands would support that syntax, but I don't think they do. And some even have different semantics for ...: What are the differences between double-dot ".." and triple-dot "..." in Git commit ranges?

1. Proxies are classes that are created and loaded at runtime. There is no source code for these classes. I know that you are wondering how you can make them do something if there is no code for them. The answer is that when you create them, you specify an object that implements InvocationHandler, which defines a method that is invoked when a proxy method is invoked.

2. You create them by using the call

   Proxy.newProxyInstance(classLoader, interfaces, invocationHandler)
   

   The arguments are:

   1. classLoader. Once the class is generated, it is loaded with this class loader.
   2. interfaces. An array of class objects that must all be interfaces. The resulting proxy implements all of these interfaces.
   3. invocationHandler. This is how your proxy knows what to do when a method is invoked. It is an object that implements InvocationHandler. When a method from any of the supported interfaces, or hashCode, equals, or toString, is invoked, the method invoke is invoked on the handler, passing the Method object for the method to be invoked and the arguments passed.

   For more on this, see the documentation for the Proxy class.

3. Every implementation of a JVM after version 1.3 must support these. They are loaded into the internal data structures of the JVM in an implementation-specific way, but it is guaranteed to work.

My answer is late, but i want to add some information that is missed in all above answers.

1) If you want to select single value in chosen select.

$('#select-id').val("22").trigger('chosen:updated');

2) If you are using multiple chosen select, then may you need to set multiple values at single time.

$('#documents').val(["22", "25", "27"]).trigger('chosen:updated');

Information gathered from following links:
1) Chosen Docs
2) Chosen Github Discussion

Forever, by default, will put logs into a random file in ~/.forever/ folder.

You should run forever list to see the running processes and their corresponding log file.

Sample output

>>> forever list
info:    Forever processes running
data:        uid  command       script forever pid  logfile                         uptime
data:    [0] 6n71 /usr/bin/node app.js 2233    2239 /home/vagrant/.forever/6n71.log 0:0:0:1.590

However, it's probably best to specify with -l as mentioned by bryanmac.

Got the same error when tried to export a large Excel file (~150.000 rows) Fixed with the following code

Application xlApp = new Application();
xlApp.DefaultSaveFormat = XlFileFormat.xlOpenXMLWorkbook;

After looking into the Chart.Bar.js file I've managed to find the solution. I've used this function to generate a random color:

function getRandomColor() {
    var letters = '0123456789ABCDEF'.split('');
    var color = '#';
    for (var i = 0; i < 6; i++ ) {
        color += letters[Math.floor(Math.random() * 16)];
    }
    return color;
}

I've added it to the end of the file and i called this function right inside the "fillColor:" under

helpers.each(dataset.data,function(dataPoint,index){
                    //Add a new point for each piece of data, passing any required data to draw.

so now it looks like this:

helpers.each(dataset.data,function(dataPoint,index){
                    //Add a new point for each piece of data, passing any required data to draw.

                    datasetObject.bars.push(new this.BarClass({
                        value : dataPoint,
                        label : data.labels[index],
                        datasetLabel: dataset.label,
                        strokeColor : dataset.strokeColor,
                        fillColor : getRandomColor(),
                        highlightFill : dataset.highlightFill || dataset.fillColor,
                        highlightStroke : dataset.highlightStroke || dataset.strokeColor
                    }));
                },this);

and it works I get different color for each bar.

This is how I do it:

// 2056776401.50 = 2,056,776,401.50
function humanizeNumber(n) {
  n = n.toString()
  while (true) {
    var n2 = n.replace(/(\d)(\d{3})($|,|\.)/g, '$1,$2$3')
    if (n == n2) break
    n = n2
  }
  return n
}

Or, in CoffeeScript:

# 2056776401.50 = 2,056,776,401.50
humanizeNumber = (n) ->
  n = n.toString()
  while true
    n2 = n.replace /(\d)(\d{3})($|,|\.)/g, '$1,$2$3'
    if n == n2 then break else n = n2
  n

According to the php manual you can do this in two ways. It depends what you need to check.

If you want to check if the given key or index exists in the array use array_key_exists

<?php
$search_array = array('first' => 1, 'second' => 4);
if (array_key_exists('first', $search_array)) {
echo "The 'first' element is in the array";
 }
?>

If you want to check if a value exists in an array use in_array

 <?php
 $os = array("Mac", "NT", "Irix", "Linux");
if (in_array("Irix", $os)) {
echo "Got Irix";
}
?>

Set a start page.

When I had this problem, I went into the solution explorer, found the page I wanted to see first (in my case "Home.aspx), right clicked on it and selected "Set As Start Page." This fixed my issue (which sounded really similar to yours). This was in Visual Studio 2012 Professional and I ran it in Firefox.

The standalone declaration is a way of telling the parser to ignore any markup declarations in the DTD. The DTD is thereafter used for validation only.

As an example, consider the humble <img> tag. If you look at the XHTML 1.0 DTD, you see a markup declaration telling the parser that <img> tags must be EMPTY and possess src and alt attributes. When a browser is going through an XHTML 1.0 document and finds an <img> tag, it should notice that the DTD requires src and alt attributes and add them if they are not present. It will also self-close the <img> tag since it is supposed to be EMPTY. This is what the XML specification means by "markup declarations can affect the content of the document." You can then use the standalone declaration to tell the parser to ignore these rules.

Whether or not your parser actually does this is another question, but a standards-compliant validating parser (like a browser) should.

Note that if you do not specify a DTD, then the standalone declaration "has no meaning," so there's no reason to use it unless you also specify a DTD.

An easy solution is to have a boolean variable that the thread sets to true on regular intervals, and that is checked and set to false by the thread wanting to know the status. If the variable is false for to long then the thread is no longer considered active.

A more thread-safe way is to have a counter that is increased by the child thread, and the main thread compares the counter to a stored value and if the same after too long time then the child thread is considered not active.

Note however, there is no way in C++11 to actually kill or remove a thread that has hanged.

Edit How to check if a thread has cleanly exited or not: Basically the same technique as described in the first paragraph; Have a boolean variable initialized to false. The last thing the child thread does is set it to true. The main thread can then check that variable, and if true do a join on the child thread without much (if any) blocking.

Edit2 If the thread exits due to an exception, then have two thread "main" functions: The first one have a try-catch inside which it calls the second "real" main thread function. This first main function sets the "have_exited" variable. Something like this:

bool thread_done = false;

void *thread_function(void *arg)
{
    void *res = nullptr;

    try
    {
        res = real_thread_function(arg);
    }
    catch (...)
    {
    }

    thread_done = true;

    return res;
}

For me the issue was that the WSGI script wasn't executable.

sudo chmod a+x django.wsgi

or just

sudo chmod u+x django.wsgi

so long as you have the correct owner

Will take you to the master branch.

git checkout master

To switch to other branches do (ignore the square brackets, it's just for emphasis purposes)

git checkout [the name of the branch you want to switch to]

To create a new branch use the -b like this (ignore the square brackets, it's just for emphasis purposes)

git checkout -b [the name of the branch you want to create]

Many people use both 2.X and 3.X python. You can use pip -V to show default pip version.
If you have many python versions, and you want to install some packages through different pip, I advise this way:

sudo python2.X -m pip install some-package==0.16

alternatively, SQL%ROWCOUNT you can use this within the procedure without any need to declare a variable

You can do that with list-style-position: inside; on the ul element :

ul {
    list-style-position: inside;
}

See working fiddle

A gc-friendly piece of code:

public static<X> X[] arrayOfNotNull(X[] array) {
    for (int p=0, N=array.length; p<N; ++p) {
        if (array[p] == null) {
            int m=p; for (int i=p+1; i<N; ++i) if (array[i]!=null) ++m;
            X[] res = Arrays.copyOf(array, m);
            for (int i=p+1; i<N; ++i) if (array[i]!=null) res[p++] = array[i];
            return res;
        }
    }
    return array;
}

It returns the original array if it contains no nulls. It does not modify the original array.

Identifiers (including column names) that are not double-quoted are folded to lower case in PostgreSQL. Column names that were created with double-quotes and thereby retained upper-case letters (and/or other syntax violations) have to be double-quoted for the rest of their life:

"first_Name"

Values (string literals / constants) are enclosed in single quotes:

'xyz'

So, yes, PostgreSQL column names are case-sensitive (when double-quoted):

SELECT * FROM persons WHERE "first_Name" = 'xyz';

Read the manual on identifiers here.

My standing advice is to use legal, lower-case names exclusively so double-quoting is not needed.

There are certain common things between lock_guard and unique_lock and certain differences.

But in the context of the question asked, the compiler does not allow using a lock_guard in combination with a condition variable, because when a thread calls wait on a condition variable, the mutex gets unlocked automatically and when other thread/threads notify and the current thread is invoked (comes out of wait), the lock is re-acquired.

This phenomenon is against the principle of lock_guard. lock_guard can be constructed only once and destructed only once.

Hence lock_guard cannot be used in combination with a condition variable, but a unique_lock can be (because unique_lock can be locked and unlocked several times).

You can create your own shortcut for increase/Decrease Netbeans Fonts size

just goto Tools > Options > Keymaps than search zoom

click on three (...) dot and click Edit

press your_shortcut_keys ( what ever shortcut you want to set)

Service references are another example where partial classes are useful to separate generated code from user-created code.

You can "extend" the service classes without having them overwritten when you update the service reference.

http://www.mathworks.com/help/techdoc/ref/rand.html

n = 13 + (rand(1) * 7);

Not tested, but something like:

Dim sourceSheet As Worksheet
Dim destSheet As Worksheet

'' copy from the source
Workbooks.Open Filename:="c:\source.xls"
Set sourceSheet = Worksheets("source")
sourceSheet.Activate
sourceSheet.Cells.Select
Selection.Copy

'' paste to the destination
Workbooks.Open Filename:="c:\destination.xls"
Set destSheet = Worksheets("dest")
destSheet.Activate
destSheet.Cells.Select
destSheet.Paste

'' save & close
ActiveWorkbook.Save
ActiveWorkbook.Close

Note that this assumes the destination sheet already exists. It's pretty easy to create one if it doesn't.

Swift Version

The easiest method is to set the tableFooterView property:

override func viewDidLoad() {
    super.viewDidLoad()
    // This will remove extra separators from tableview
    self.tableView.tableFooterView = UIView(frame: CGRectZero)
}

I use this helper method to render components and return an component instance. Methods can be called on that instance.

static async renderComponentAt(componentClass, props, parentElementId){
         let componentId = props.id;
        if(!componentId){
            throw Error('Component has no id property. Please include id:"...xyz..." to component properties.');
        }

        let parentElement = document.getElementById(parentElementId);

        return await new Promise((resolve, reject) => {
            props.ref = (component)=>{
                resolve(component);
            };
            let element = React.createElement(componentClass, props, null);
            ReactDOM.render(element, parentElement);
        });
    }

$('#mytable tr').each(function() {
  // need this to skip the first row
  if ($(this).find("td:first").length > 0) {
    var cutomerId = $(this).find("td:first").html();
  }
});

transparent is the default for background-color

http://www.w3schools.com/cssref/pr_background-color.asp

public static void Each<T>(this IEnumerable<T> items, Action<T> action) {
foreach (var item in items) {
    action(item);
} }

... and call it thusly:

myList.Each(x => { x.Enabled = false; });

Here is what worked for me. I am using looped-back node module with Electron Js and faced this issue. After trying many things following worked for me.

In your package.json file in the scripts add following lines:

  ... 
"scripts": {
        "start": "electron .",
        "rebuild": "electron-rebuild"
    
      },
...

And then run following command npm run rebuild

The best thing is probably to create a variable that holds your binaries:

binaries=code1 code2

Then use that in the all-target, to avoid repeating:

all: clean $(binaries)

Now, you can use this with the clean-target, too, and just add some globs to catch object files and stuff:

.PHONY: clean

clean:
    rm -f $(binaries) *.o

Note use of the .PHONY to make clean a pseudo-target. This is a GNU make feature, so if you need to be portable to other make implementations, don't use it.

@glglgl already explained why what you were trying to do was not working. Actually, if you are really aiming at defining a variable in a header, you can trick using some preprocessor directives:

file1.c:

#include <stdio.h>

#define DEFINE_I
#include "global.h"

int main()
{
    printf("%d\n",i);
    foo();
    return 0;
}

file2.c:

#include <stdio.h>
#include "global.h"

void foo()
{
    i = 54;
    printf("%d\n",i);
}

global.h:

#ifdef DEFINE_I
int i = 42;
#else
extern int i;
#endif

void foo();

In this situation, i is only defined in the compilation unit where you defined DEFINE_I and is declared everywhere else. The linker does not complain.

I have seen this a couple of times before where an enum was declared in a header, and just below was a definition of a char** containing the corresponding labels. I do understand why the author preferred to have that definition in the header instead of putting it into a specific source file, but I am not sure whether the implementation is so elegant.

It seems some what center of the screen. So I would like to do like this

body { 
     background: url('http://oi44.tinypic.com/33tjudk.jpg') no-repeat center center fixed;    
     background-size:cover; 
     text-align: 0 auto; // Make the play button horizontal center
}

#play_button {
    position:absolute;  // absolutely positioned
    transition: .5s ease;
    top: 50%;  // Makes vertical center
} 

Your syntax appears completely correct in:

mongoimport --db dbName --collection collectionName --file fileName.json

Make sure you are in the correct folder or provide the full path.

This works from my Windows 10's cmd.exe prompt

powershell -ExecutionPolicy Bypass -Command "Import-Module C:\Users\william\ps1\TravelBook; Get-TravelBook Hawaii"

This example shows

1. how to chain multiple commands
2. how to import module with module path
3. how to run a function defined in the module
4. No need for those fancy "&".

I started getting this error after changing from model-first to code-first. I have multiple threads updating a database where some might update the same row. I don't know why I didn't have a problem using model-first, assume that it uses a different concurrency default.

To handle it in one place knowing the conditions under which it might occur, I added the following overload to my DbContext class:

using System.Data.Entity.Core.Objects;
using System.Data.Entity.Infrastructure;

public class MyDbContext: DbContext {
...
        public int SaveChanges(bool refreshOnConcurrencyException, RefreshMode refreshMode = RefreshMode.ClientWins) {
            try {
                return SaveChanges();
            }
            catch (DbUpdateConcurrencyException ex) {
                foreach (DbEntityEntry entry in ex.Entries) {
                    if (refreshMode == RefreshMode.ClientWins)
                        entry.OriginalValues.SetValues(entry.GetDatabaseValues());
                    else
                        entry.Reload();
                }
                return SaveChanges();
            }
        }
}

Then called SaveChanges(true) wherever applicable.

Set them to public. That is, wherever you have the word "protected", change it for the word "public". If you need access control, put it inside, in front of the word 'get' or the word 'set'.

When passing by value:

void func(Object o);

and then calling

func(a);

you will construct an Object on the stack, and within the implementation of func it will be referenced by o. This might still be a shallow copy (the internals of a and o might point to the same data), so a might be changed. However if o is a deep copy of a, then a will not change.

When passing by reference:

void func2(Object& o);

and then calling

func2(a);

you will only be giving a new way to reference a. "a" and "o" are two names for the same object. Changing o inside func2 will make those changes visible to the caller, who knows the object by the name "a".

Another advantage of using the '[[' operator is that it works both with data.frame and data.table. So if the function has to be made running for both data.frame and data.table, and you want to extract a column from it as a vector then

data[["column_name"]] 

is best.

You can use margin-top: -50% to move the text all the way to the top of the div.

margin-top: -50%;

Depending on if your regex flavor supports it, I might use:

\b[A-Z]{2}\d{6}\b    # Ensure there are "word boundaries" on either side, or

(?<![A-Z])[A-Z]{2}\d{6}(?!\d) # Ensure there isn't a uppercase letter before
                              # and that there is not a digit after

Multiple column search with dataframe:

frame[frame.filename.str.match('*.'+MetaData+'.*') & frame.file_path.str.match('C:\test\test.txt')]

With the latest Firefox, I must use:

<script type="text/javascript">...</script>

Or else the script may not run properly.

Here's a slightly different way:

SELECT *
FROM UserProfile
WHERE PropertydefinitionID in (40, 53)
  AND (LEN(ISNULL(PropertyValue,'')) = 0)

If you are given this format it takes like a link to another page or another link.partial view majorly used for renduring the html files from one place to another.

git clone https://github.com/ORGANIZATION/repository.git (clone the repository)

cd repository (navigate to the repository)

git fetch origin 2600f4f928773d79164964137d514b85400b09b2

git checkout FETCH_HEAD

We're using Jira 6.2 and I use this query:

updatedDate > startOfDay(-1d) AND updatedDate < endOfDay(-1)

to return all of the issues that were updated from the previous day. You can combine with whichever queries you want to return the appropriate issues for the previous day.

• Failed validation: 403 Forbidden ("The server understood the request, but is refusing to fulfill it"). Contrary to popular opinion, RFC2616 doesn't say "403 is only intended for failed authentication", but "403: I know what you want, but I won't do that". That condition may or may not be due to authentication.
• Trying to add a duplicate: 409 Conflict ("The request could not be completed due to a conflict with the current state of the resource.")

You should definitely give a more detailed explanation in the response headers and/or body (e.g. with a custom header - X-Status-Reason: Validation failed).

the case above is for a new project. I hit upon this error while editing a fork of a well established library.

the typedef was included in the file I was editing but the struct wasn't.

The end result being that I was attempting to edit the struct in the wrong place.

If you run into this in a similar way look for other places where the struct is edited and try it there.

@VonC's answer to a duplicate question:

If, as commented, Paraminko does not support PPK key, the official solution, as seen here, would be to use PuTTYgen.

But you can also use the Python library CkSshKey to make that same conversion directly in your program.

See "Convert PuTTY Private Key (ppk) to OpenSSH (pem)"

import sys
import chilkat

key = chilkat.CkSshKey()

#  Load an unencrypted or encrypted PuTTY private key.

#  If  your PuTTY private key is encrypted, set the Password
#  property before calling FromPuttyPrivateKey.
#  If your PuTTY private key is not encrypted, it makes no diffference
#  if Password is set or not set.
key.put_Password("secret")

#  First load the .ppk file into a string:

keyStr = key.loadText("putty_private_key.ppk")

#  Import into the SSH key object:
success = key.FromPuttyPrivateKey(keyStr)
if (success != True):
    print(key.lastErrorText())
    sys.exit()

#  Convert to an encrypted or unencrypted OpenSSH key.

#  First demonstrate converting to an unencrypted OpenSSH key

bEncrypt = False
unencryptedKeyStr = key.toOpenSshPrivateKey(bEncrypt)
success = key.SaveText(unencryptedKeyStr,"unencrypted_openssh.pem")
if (success != True):
    print(key.lastErrorText())
    sys.exit()

To handle undefined variables as well as nulls, you can use substitute with deparse:

nullSafe <- function(x) {
  if (!exists(deparse(substitute(x))) || is.null(x)) {
    return(NA)
  } else {
    return(x)
  }
}

nullSafe(my.nonexistent.var)

If you have something like this:

t.has_key(ew)

change it to below for running on Python 3.X and above:

key = ew
if key not in t

Just run below command with admin access

npm install --global --production windows-build-tools

You have to drop the constraint before drop your table.

You can use those queries to find all FKs in your table and find the FKs in the tables in which your table is used.

Declare @SchemaName VarChar(200) = 'Your Schema name'
Declare @TableName VarChar(200) = 'Your Table Name'

-- Find FK in This table.
SELECT 
    ' IF  EXISTS (SELECT * FROM sys.foreign_keys WHERE object_id = 
OBJECT_ID(N''' + 
      '[' + OBJECT_SCHEMA_NAME(FK.parent_object_id) + '].[' + FK.name + ']'
+ ''') AND parent_object_id = OBJECT_ID(N''' + 
      '[' + OBJECT_SCHEMA_NAME(FK.parent_object_id) + '].[' + 
OBJECT_NAME(FK.parent_object_id) + ']' + ''')) ' +

    'ALTER TABLE ' +  OBJECT_SCHEMA_NAME(FK.parent_object_id) +
    '.[' + OBJECT_NAME(FK.parent_object_id) + 
    '] DROP CONSTRAINT ' + FK.name
    , S.name , O.name, OBJECT_NAME(FK.parent_object_id)
FROM sys.foreign_keys AS FK
INNER JOIN Sys.objects As O 
  ON (O.object_id = FK.parent_object_id )
INNER JOIN SYS.schemas AS S 
  ON (O.schema_id = S.schema_id)  
WHERE 
      O.name = @TableName
      And S.name = @SchemaName


-- Find the FKs in the tables in which this table is used
  SELECT 
    ' IF  EXISTS (SELECT * FROM sys.foreign_keys WHERE object_id =   
      OBJECT_ID(N''' + 
      '[' + OBJECT_SCHEMA_NAME(FK.parent_object_id) + '].[' + FK.name + ']'
  + ''') AND parent_object_id = OBJECT_ID(N''' + 
      '[' + OBJECT_SCHEMA_NAME(FK.parent_object_id) + '].[' + 
 OBJECT_NAME(FK.parent_object_id) + ']' + ''')) ' +

    ' ALTER TABLE ' +  OBJECT_SCHEMA_NAME(FK.parent_object_id) +
    '.[' + OBJECT_NAME(FK.parent_object_id) + 
    '] DROP CONSTRAINT ' + FK.name
    , S.name , O.name, OBJECT_NAME(FK.parent_object_id)
FROM sys.foreign_keys AS FK
INNER JOIN Sys.objects As O 
  ON (O.object_id = FK.referenced_object_id )
INNER JOIN SYS.schemas AS S 
  ON (O.schema_id = S.schema_id)  
WHERE 
      O.name = @TableName
      And S.name = @SchemaName 

Have you tried os.mkdir?

You might also try this little code snippet:

mypath = ...
if not os.path.isdir(mypath):
   os.makedirs(mypath)

makedirs creates multiple levels of directories, if needed.

Try this that works for me:

$('#bar').mousedown();

You can add a class declaration to the submit button of a form by doing the following:

<%= f.submit class: 'btn btn-default' %> <-- Note: there is no comma!

If you are altering a _form.html.erb partial of a scaffold and you want to keep the dynamic change of the button name between controller actions, DO NOT specify a name 'name'.

Without specifying a name and depending on the action the form is rendered the button will get the .class = "btn btn-default" (Bootstrap class)(or whatever .class you specify) with the following names:

• Update model_name

• Create model_name
  (where model_name the name of the scaffold's model)

http://www.cplusplus.com/reference/clibrary/cstring/strtok/

Take a look at this, and use whitespace characters as the delimiter. If you need more hints let me know.

From the website:

char * strtok ( char * str, const char * delimiters );

On a first call, the function expects a C string as argument for str, whose first character is used as the starting location to scan for tokens. In subsequent calls, the function expects a null pointer and uses the position right after the end of last token as the new starting location for scanning.

Once the terminating null character of str is found in a call to strtok, all subsequent calls to this function (with a null pointer as the first argument) return a null pointer.

Parameters

• str
  • C string to truncate.
  • Notice that this string is modified by being broken into smaller strings (tokens). Alternativelly [sic], a null pointer may be specified, in which case the function continues scanning where a previous successful call to the function ended.
• delimiters
  • C string containing the delimiter characters.
  • These may vary from one call to another.

Return Value

A pointer to the last token found in string. A null pointer is returned if there are no tokens left to retrieve.

Example

/* strtok example */
#include <stdio.h>
#include <string.h>

int main ()
{
  char str[] ="- This, a sample string.";
  char * pch;
  printf ("Splitting string \"%s\" into tokens:\n",str);
  pch = strtok (str," ,.-");
  while (pch != NULL)
  {
    printf ("%s\n",pch);
    pch = strtok (NULL, " ,.-");
  }
  return 0;
}