This may help you.
$today = date("m-d-Y H:i:s");
$thisMonth =date("m");
$thisYear = date("y");
$expectedDate = ($thisMonth+1)."-08-$thisYear 23:58:00";
if (strtotime($expectedDate) > strtotime($today)) {
echo "Expected date is greater then current date";
return ;
} else
{
echo "Expected date is lesser then current date";
}
Considering it hasn't been released yet, I'm assuming this is a question for ahead-of-time or you have a developer's build. As Benjamin mentioned, MAMP is the easiest way. However, if you want a native install, the process should be like 10.5. PHP comes installed on OS X by default (not always activated for some), just download the 32-bit version of MySQL, start Apache, and you should be good to go. You may have to tweak Apache for PHP or MySQL, depending on what builds are present. I didn't have to tweak anything to have it working.
There are no hard and fast rules, but the rule of thumb from a purely conceptual standpoint that I like to use can briefly be summed up like this: a URI path (by definition) represents a resource and query parameters are essentially modifiers on that resource. So far that likely doesn't help... With a REST API you have the major methods of acting upon a single resource using GET
, PUT
, and DELETE
. Therefore whether something should be represented in the path or as a parameter can be reduced to whether those methods make sense for the representation in question. Would you reasonably PUT
something at that path and would it be semantically sound to do so? You could of course PUT
something just about anywhere and bend the back-end to handle it, but you should be PUT
ing what amounts to a representation of the actual resource and not some needlessly contextualized version of it. For collections the same can be done with POST
. If you wanted to add to a particular collection what would be a URL that makes sense to POST
to.
This still leaves some gray areas as some paths could point to what amount to children of parent resources which is somewhat discretionary and dependent on their use. The one hard line that this draws is that any type of transitive representation should be done using a query parameter, since it would not have an underlying resource.
In response to the real world example given in the original question (Twitter's API), the parameters represent a transitive query that filters on the state of the resources (rather than a hierarchy). In that particular example it would be entirely unreasonable to add to the collection represented by those constraints, and further that query would not be able to be represented as a path that would make any sense in the terms of an object graph.
The adoption of this type of resource oriented perspective can easily map directly to the object graph of your domain model and drive the logic of your API to the point where everything works very cleanly and in a fairly self-documenting way once it snaps into clarity. The concept can also be made clearer by stepping away from systems that use traditional URL routing mapped on to a normally ill-fitting data model (i.e. an RDBMS). Apache Sling would certainly be a good place to start. The concept of object traversal dispatch in a system like Zope also provides a clearer analog.
The ISO is probably pre-pidded. You'll need to delete the key from the setup files. It should then ask you for a key during installation.
I found a much simpler alternative way to generating soap message. Given a Person Object:
import com.fasterxml.jackson.annotation.JsonInclude;
@JsonInclude(JsonInclude.Include.NON_NULL)
public class Person {
private String name;
private int age;
private String address; //setter and getters below
}
Below is a simple Soap Message Generator:
import com.fasterxml.jackson.databind.DeserializationFeature;
import com.fasterxml.jackson.databind.ObjectMapper;
import com.fasterxml.jackson.databind.SerializationFeature;
import com.fasterxml.jackson.datatype.jsr310.JavaTimeModule;
import lombok.extern.slf4j.Slf4j;
import org.apache.commons.lang3.StringUtils;
import com.fasterxml.jackson.dataformat.xml.XmlMapper;
@Slf4j
public class SoapGenerator {
protected static final ObjectMapper XML_MAPPER = new XmlMapper()
.enable(DeserializationFeature.READ_UNKNOWN_ENUM_VALUES_AS_NULL)
.configure(DeserializationFeature.FAIL_ON_UNKNOWN_PROPERTIES, false)
.configure(SerializationFeature.WRITE_DATES_AS_TIMESTAMPS, false)
.registerModule(new JavaTimeModule());
private static final String SOAP_BODY_OPEN = "<soap:Body>";
private static final String SOAP_BODY_CLOSE = "</soap:Body>";
private static final String SOAP_ENVELOPE_OPEN = "<soap:Envelope xmlns:soap=\"http://schemas.xmlsoap.org/soap/envelope/\">";
private static final String SOAP_ENVELOPE_CLOSE = "</soap:Envelope>";
public static String soapWrap(String xml) {
return SOAP_ENVELOPE_OPEN + SOAP_BODY_OPEN + xml + SOAP_BODY_CLOSE + SOAP_ENVELOPE_CLOSE;
}
public static String soapUnwrap(String xml) {
return StringUtils.substringBetween(xml, SOAP_BODY_OPEN, SOAP_BODY_CLOSE);
}
}
You can use by:
public static void main(String[] args) throws Exception{
Person p = new Person();
p.setName("Test");
p.setAge(12);
String xml = SoapGenerator.soapWrap(XML_MAPPER.writeValueAsString(p));
log.info("Generated String");
log.info(xml);
}
Just need to try this:
string smtpAddress = "smtp.gmail.com";
int portNumber = 587;
bool enableSSL = true;
string emailFrom = "companyemail";
string password = "password";
string emailTo = "Your email";
string subject = "Hello!";
string body = "Hello, Mr.";
MailMessage mail = new MailMessage();
mail.From = new MailAddress(emailFrom);
mail.To.Add(emailTo);
mail.Subject = subject;
mail.Body = body;
mail.IsBodyHtml = true;
using (SmtpClient smtp = new SmtpClient(smtpAddress, portNumber))
{
smtp.Credentials = new NetworkCredential(emailFrom, password);
smtp.EnableSsl = enableSSL;
smtp.Send(mail);
}
To my knowledge, there is sadly no CSS filter to colorise an element (perhaps with the use of some SVG filter magic, but I'm somewhat unfamiliar with that) and even if that wasn't the case, filters are basically only supported by webkit browsers.
With that said, you could still work around this and use a canvas
to modify your image. Basically, you can draw an image element onto a canvas and then loop through the pixels, modifying the respective RGBA values to the colour you want.
However, canvases do come with some restrictions. Most importantly, you have to make sure that the image src comes from the same domain as the page. Otherwise the browser won't allow you to read or modify the pixel data of the canvas.
Here's a JSFiddle changing the colour of the JSFiddle logo.
//Base64 source, but any local source will work_x000D_
var src = "data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAC0AAAAgCAYAAACGhPFEAAAABGdBTUEAALGPC/xhBQAABzhJREFUWAnNWAtwXFUZ/v9zs4GUJJu+k7tb5DFAGWO1aal1sJUiY3FQQaWidqgPLAMqYzd9CB073VodhCa7KziiFgWhzvAYQCiCD5yK4gOTDnZK2ymdZoruppu0afbu0pBs7p7f7yy96W662aw2QO/Mzj2P//Gd/5z/+89dprfzubnTN332Re+xiKawllxWucm+9O4eCi9xT8ctn45yKd3AXX1BPsu3XIiuY+K5kDmrUA7jORb5m2baLm7uscNrJr9eOF9Je8JAz9ySnFHlq9nEpG6CYx+RdJDQDtKymxT1iWZLFDUy0/kkfDUxzYVzV0hvHZLs946Gph+uBLCRmRDQdjTVwmw9DZCNMPi4KzqWbPX/sxwIu71vlrKq10HnZizwTSFZngj5f1NOx5s7bdB2LHWDEusBOD487LrX9qyd8qpnvJL3zGjqAh+pR4W4RVhu715Vv2U8PTWeQLn5YHvms4qsR4TpH/ImLfhfARvbPaGGrrjTtwjH5hFFfHcgkv5SOZ9mbvxIgwGaZl+8ULGcJ8zOsJa9R1r9B2d8v2eGb1KNieqBhLNz8ekyAoV3VAX985+FvSXEenF8lf9lA7DUUxa0HUl/RTG1EfOUQmUwwCtggDewiHmc1R+Ir/MfKJz/f9tTwn31Nf7qVxlHLR6qXwg7cHXqU/p4hPdUB6Lp55TiXwDYTsrpG12dbdY5t0WLrCSRSVjIItG0dqIAG2jHwlPTmvQdsL3Ajjg3nAq3zIgdS98ZiGV0MJZeWVJs2WNWIJK5hcLh0osuqVTxIAdi6X3w/0LFGoa+AtFMzo5kflix0gQLBiLOZmAYro84RcfSc3NKpFAcliM9eYDdjZ7QO/1mRc+CTapqFX+4lO9TQEPoUpz//anQ5FQphXdizB1QXXk/moOl/JUC7aLMDpQSHj02PdxbG9xybM60u47UjZ4bq290Zm451ky3HSi6kxTKJ9fXHQVvZJm1XTjutYsozw53T1L+2ufBGPMTe/c30M/mD3uChW+c+6tQttthuBnbqMBLKGbydI54/eFQ3b5CWa/dGMl8xFJ0D/rvg1Pjdxil+2XK5b6ZWD15lyfnvYOxTBYs9TrY5NbuUENRUo5EGtGyVUNtBwBfDjA/IDtTkiNRsdYD8O+NcVN2KUfXo3UnukvA6Z3I+mWeY++NpNoAwDvAv1Uiss7oiNBmYD+XraoO0NvnPVnvrbUsA4CcYusPgajzY2/cvN+KtOFl/6w/IWrvdTV/Ktla92KhkNcOxpwPCqm/IgLbEvteW1m4E2/d8iY9AZOXQ/7WxKq6nxq9YNT5OLF6DmAfTHT13EL3XjTk2csXk4bqX2OXWiQ73Jz49tS4N5d/oxoHLr14EzPfAf1IIlS/2oznIx1omLURhL5Qa1oxFuC8EeHb8U6I88bXCwGbuZ61jb2Jgz1XYUHb0b0vEHNWmHE9lNsjWrcmnMhNhYDNnCkmNJSFHFdzte82M1b04HgC6HrYbAPw1pFdNOc4GE334wz9qkihRAdK/0HBub/E1MkhJBiq6V8gq7Htm05OjN2C/z/jCP1xbAlCwcnsAsbdkGHF/trPIcoNrtbjFRNmoama6EgZ42SimRG5FjLHWakNwWjmirLyZpLpKH7TysghZ00OUHNTxFmK2yDNQSKlx7u0Q0GQeLtQdy4rY5zMzqVb/ccoJ/OQMEmoPWW3988to4NY8DxYf6WMDCW6ktuRvFqxmqewgguhdLCcwsic0DMA8lE7kvrYyFhBw446X2B/nRNo739/YnX9azKUXYCg9CtlvdAUyywuEB1p4gh9AzbPZc0mF8Z+sINgn0MIwiVgKcAG6rGlT86AMdqw2n8ppR63o+mveQXCFAxzX2BWD0P6pcT+g3uNlmEDV3JX4iOh1xICdWU2gGXOMXN5HfRhK4IoPxlfXQfmKf+Ajh1I+MEeHMcKzqvoxoZsHsoOXgP+fEkxbw1e2JhB0h2q9tc4OL/fAVdsdd3jnyhklmRo8qGBQXchIvMMKPW7Pt85/SM66CNmDw1mh75cHu6JWZFZxNLNSJTPIM5PuJquKEt3o6zmqyJZH4LTC7CIfTonO5Jr/B2jxIq6jW3OZVYVX4edDSD6e1BAXqwgl/I2miKp+ZayOkT0CjaJww21/2bhznio7uoiL2dQB8HdhoV++ri4AdUdtgfw789mRHspzulXzyCcI1BMVQXgL5LodnP7zFfE+N9/9yOUyedxTn/SFHWWj0ifAY1ANHUleOJRlPqdCUmbO85J1jjxUfkUkgVCsg1/uGw0n/fvFm67LT2NLTLfi98Cke8dpMGl3r9QxVRnPuPrWzaIUmsAtgas0okd6ETh7AYt5d7+BeCbhfKVcQ6CtwgJjjoiP3fdgVbcbY57/otBnxidfndvo6/67BtxUf4kztJsbMg0CJaU9QxN2FskhePQBWr7La6wvzRFarTtyoBgB4hm5M//aAMT2+/Vlfzp81/vywLMWSBN1QAAAABJRU5ErkJggg==";_x000D_
var canvas = document.getElementById("theCanvas");_x000D_
var ctx = canvas.getContext("2d");_x000D_
var img = new Image;_x000D_
_x000D_
//wait for the image to load_x000D_
img.onload = function() {_x000D_
//Draw the original image so that you can fetch the colour data_x000D_
ctx.drawImage(img,0,0);_x000D_
var imgData = ctx.getImageData(0, 0, canvas.width, canvas.height);_x000D_
_x000D_
/*_x000D_
imgData.data is a one-dimensional array which contains _x000D_
the respective RGBA values for every pixel _x000D_
in the selected region of the context _x000D_
(note i+=4 in the loop)_x000D_
*/_x000D_
_x000D_
for (var i = 0; i < imgData.data.length; i+=4) {_x000D_
imgData.data[i] = 255; //Red, 0-255_x000D_
imgData.data[i+1] = 255; //Green, 0-255_x000D_
imgData.data[i+2] = 255; //Blue, 0-255_x000D_
/* _x000D_
imgData.data[i+3] contains the alpha value_x000D_
which we are going to ignore and leave_x000D_
alone with its original value_x000D_
*/_x000D_
}_x000D_
ctx.clearRect(0, 0, canvas.width, canvas.height); //clear the original image_x000D_
ctx.putImageData(imgData, 0, 0); //paint the new colorised image_x000D_
}_x000D_
_x000D_
//Load the image!_x000D_
img.src = src;
_x000D_
body {_x000D_
background: green;_x000D_
}
_x000D_
<canvas id="theCanvas"></canvas>
_x000D_
You have to call next()
before you can start reading values from the first row. beforeFirst
puts the cursor before the first row, so there's no data to read.
No, it doesn't save you memory.
Also note that you don't have to import Math
at all. Everything in java.lang
is imported automatically.
A better example would be something like an ArrayList
import java.util.ArrayList;
....
ArrayList<String> i = new ArrayList<String>();
Note I'm importing the ArrayList
specifically. I could have done
import java.util.*;
But you generally want to avoid large wildcard imports to avoid the problem of collisions between packages.
<div class="row">
<div class="col-4 alert alert-primary">
1
</div>
<div class="col-8">
<div class="row">
<div class="col-6 alert alert-primary">
2
</div>
<div class="col-6 alert alert-primary">
3
</div>
<div class="col-6 alert alert-primary">
4
</div>
<div class="col-6 alert alert-primary">
5
</div>
</div>
</div>
</div>
<div class="row">
<div class="col-4 alert alert-primary">
6
</div>
<div class="col-4 alert alert-primary">
7
</div>
<div class="col-4 alert alert-primary">
8
</div>
</div>
Move semantics is about transferring resources rather than copying them when nobody needs the source value anymore.
In C++03, objects are often copied, only to be destroyed or assigned-over before any code uses the value again. For example, when you return by value from a function—unless RVO kicks in—the value you're returning is copied to the caller's stack frame, and then it goes out of scope and is destroyed. This is just one of many examples: see pass-by-value when the source object is a temporary, algorithms like sort
that just rearrange items, reallocation in vector
when its capacity()
is exceeded, etc.
When such copy/destroy pairs are expensive, it's typically because the object owns some heavyweight resource. For example, vector<string>
may own a dynamically-allocated memory block containing an array of string
objects, each with its own dynamic memory. Copying such an object is costly: you have to allocate new memory for each dynamically-allocated blocks in the source, and copy all the values across. Then you need deallocate all that memory you just copied. However, moving a large vector<string>
means just copying a few pointers (that refer to the dynamic memory block) to the destination and zeroing them out in the source.
Bootstrap4:
Comes with .no-gutters
out of the box.
source: https://github.com/twbs/bootstrap/pull/21211/files
Bootstrap3:
Requires custom CSS.
Stylesheet:
.row.no-gutters {
margin-right: 0;
margin-left: 0;
& > [class^="col-"],
& > [class*=" col-"] {
padding-right: 0;
padding-left: 0;
}
}
Then to use:
<div class="row no-gutters">
<div class="col-xs-4">...</div>
<div class="col-xs-4">...</div>
<div class="col-xs-4">...</div>
</div>
It will:
// Store integer 182
int intValue = 182;
// Convert integer 182 as a hex in a string variable
string hexValue = intValue.ToString("X");
// Convert the hex string back to the number
int intAgain = int.Parse(hexValue, System.Globalization.NumberStyles.HexNumber);
from http://www.geekpedia.com/KB8_How-do-I-convert-from-decimal-to-hex-and-hex-to-decimal.html
Try to use Aspose.cells library (not free, but trial is enough to read), it is quite good
Install-package Aspose.cells
There is sample code:
using Aspose.Cells;
using System;
namespace ExcelReader
{
class Program
{
static void Main(string[] args)
{
// Replace path for your file
readXLS(@"C:\MyExcelFile.xls"); // or "*.xlsx"
Console.ReadKey();
}
public static void readXLS(string PathToMyExcel)
{
//Open your template file.
Workbook wb = new Workbook(PathToMyExcel);
//Get the first worksheet.
Worksheet worksheet = wb.Worksheets[0];
//Get cells
Cells cells = worksheet.Cells;
// Get row and column count
int rowCount = cells.MaxDataRow;
int columnCount = cells.MaxDataColumn;
// Current cell value
string strCell = "";
Console.WriteLine(String.Format("rowCount={0}, columnCount={1}", rowCount, columnCount));
for (int row = 0; row <= rowCount; row++) // Numeration starts from 0 to MaxDataRow
{
for (int column = 0; column <= columnCount; column++) // Numeration starts from 0 to MaxDataColumn
{
strCell = "";
strCell = Convert.ToString(cells[row, column].Value);
if (String.IsNullOrEmpty(strCell))
{
continue;
}
else
{
// Do your staff here
Console.WriteLine(strCell);
}
}
}
}
}
}
I am python novice so this may not be the most efficient method but, if I understand the intent of the question correctly, steps listed below worked for me.
>>> import numpy as np
>>> Data = np.random.random((100, 100, 1000, 2))
>>> result = np.empty(Data.shape[:-1], dtype=complex)
>>> result.real = Data[...,0]; result.imag = Data[...,1]
>>> print Data[0,0,0,0], Data[0,0,0,1], result[0,0,0]
0.0782889873474 0.156087854837 (0.0782889873474+0.156087854837j)
Normally i use a class for this:
public class ClassName
{
public string Col1 { get; set; }
public int Col2 { get; set; }
}
Now you can use a loop to fill a list and ToArray
if you really need an array:
ClassName[] allRecords = null;
string sql = @"SELECT col1,col2
FROM some table";
using (var command = new SqlCommand(sql, con))
{
con.Open();
using (var reader = command.ExecuteReader())
{
var list = new List<ClassName>();
while (reader.Read())
list.Add(new ClassName { Col1 = reader.GetString(0), Col2 = reader.GetInt32(1) });
allRecords = list.ToArray();
}
}
Note that i've presumed that the first column is a string
and the second an integer
. Just to demonstrate that C# is typesafe and how you use the DataReader.GetXY
methods.
Try manually start the service from Windows services, Start -> cmd.exe -> services.msc. Also try to configure the MySQL server to run on another port and try starting it again. Change the my.ini file to change the port number.
In http://bugs.jquery.com/ticket/1886 it becomes obvious that the jQuery devs have serious mental issues reg. functional programming inspired additions. Somehow it's good to have some fundamental things (like map) but not others (like reduce), unless it reduces jQuery's overall filesize. Go figure.
Helpfully, someone placed code to use the normal reduce function for jQuery arrays:
$.fn.reduce = [].reduce;
Now we can use a simple reduce function to create a summation:
//where X is a jQuery array
X.reduce(function(a,b){ return a + b; });
// (change "a" into parseFloat("a") if the first a is a string)
Lastly, as some older browsers hadn't yet implemented reduce, a polyfill can be taken from MDN (it's big but I guess it has the exact same behavior, which is desirable):
if ( 'function' !== typeof Array.prototype.reduce ) {
Array.prototype.reduce = function( callback /*, initialValue*/ ) {
'use strict';
if ( null === this || 'undefined' === typeof this ) {
throw new TypeError(
'Array.prototype.reduce called on null or undefined' );
}
if ( 'function' !== typeof callback ) {
throw new TypeError( callback + ' is not a function' );
}
var t = Object( this ), len = t.length >>> 0, k = 0, value;
if ( arguments.length >= 2 ) {
value = arguments[1];
} else {
while ( k < len && ! k in t ) k++;
if ( k >= len )
throw new TypeError('Reduce of empty array with no initial value');
value = t[ k++ ];
}
for ( ; k < len ; k++ ) {
if ( k in t ) {
value = callback( value, t[k], k, t );
}
}
return value;
};
}
On Windows, part of the mystery appears to be where npm installs the Grunt.cmd file. While on my Linux box, I just had to run sudo npm install -g grunt-cli, on my Windows 8 work laptop, Grunt was placed in the '.npm-global' directory: %USER_HOME%\.npm-global and I had to add that to the Path.
So on Windows my steps were:
npm install -g grunt-cli
figure out where the heck grunt.cmd was (I guess for some it is in %USER_HOME%\App_Data\Roaming)
Added the location to my Path environment variable. Opened a new cmd prompt and the grunt command ran fine.
Try this
if (document.documentElement.clientWidth < 767) {
// scripts
}
For More Reference click here
I'm doing it like this at the moment:
// Requires NuGet package Microsoft.Extensions.Configuration.Json
using Microsoft.Extensions.Configuration;
using System.IO;
namespace ImagesToMssql.AppsettingsJson
{
public static class AppSettingsJson
{
public static IConfigurationRoot GetAppSettings()
{
string applicationExeDirectory = ApplicationExeDirectory();
var builder = new ConfigurationBuilder()
.SetBasePath(applicationExeDirectory)
.AddJsonFile("appsettings.json");
return builder.Build();
}
private static string ApplicationExeDirectory()
{
var location = System.Reflection.Assembly.GetExecutingAssembly().Location;
var appRoot = Path.GetDirectoryName(location);
return appRoot;
}
}
}
And then I use this where I need to get the data from the appsettings.json file:
var appSettingsJson = AppSettingsJson.GetAppSettings();
// appSettingsJson["keyName"]
This worked for me
PHP 7.2
AddHandler application/x-httpd-ea-php72 .php .php7 .phtml
PHP 7.3
AddHandler application/x-httpd-ea-php73 .php
Another way simpler than me has worked with SQL Developer 4 in Windows 7
spool "path_to_file\\filename.txt"
query to execute
spool of
You have to execute it as a script, because if not only the query will be saved in the output file In the path name I use the double character "\" as a separator when working with Windows and SQL, The output file will display the query and the result.
in the line String str2[]=name.split(""); give an extra character in Array...
Let me explain by example
"Aditya".split("") would return [, A, d,i,t,y,a] You will have a extra character in your Array...
The "Aditya".split("") does not work as expected by saroj routray you will get an extra character in String => [, A, d,i,t,y,a].
I have modified it,see below code it work as expected
public static boolean isValidName(String inputString) {
String specialCharacters = " !#$%&'()*+,-./:;<=>?@[]^_`{|}~0123456789";
String[] strlCharactersArray = new String[inputString.length()];
for (int i = 0; i < inputString.length(); i++) {
strlCharactersArray[i] = Character
.toString(inputString.charAt(i));
}
//now strlCharactersArray[i]=[A, d, i, t, y, a]
int count = 0;
for (int i = 0; i < strlCharactersArray.length; i++) {
if (specialCharacters.contains( strlCharactersArray[i])) {
count++;
}
}
if (inputString != null && count == 0) {
return true;
} else {
return false;
}
}
You just need to put -y
with the install command.
For example: yum install <package_to_install> -y
I usually do it this way whenever I need a date/time string:
set dt=%DATE:~6,4%_%DATE:~3,2%_%DATE:~0,2%__%TIME:~0,2%_%TIME:~3,2%_%TIME:~6,2%
set dt=%dt: =0%
This is for the German date/time format (dd.mm.yyyy hh:mm:ss). Basically I concatenate the substrings and finally replace all spaces with zeros.
Short explanation of how substrings work:
%VARIABLE:~num_chars_to_skip,num_chars_to_keep%
So to get just the year from a date like "29.03.2018" use:
%DATE:~6,4%
^-----skip 6 characters
^---keep 4 characters
It can be done with a while
loop (foreach
doesn't support this):
my @arr = (1111, 2222, 3333);
while (my ($index, $element) = each(@arr))
{
# You may need to "use feature 'say';"
say "Index: $index, Element: $element";
}
Output:
Index: 0, Element: 1111
Index: 1, Element: 2222
Index: 2, Element: 3333
Perl version: 5.14.4
Here's a version for Integer
and Double
:
private static boolean isInteger(Double variable) {
if ( variable.equals(Math.floor(variable)) &&
!Double.isInfinite(variable) &&
!Double.isNaN(variable) &&
variable <= Integer.MAX_VALUE &&
variable >= Integer.MIN_VALUE) {
return true;
} else {
return false;
}
}
To convert Double
to Integer
:
Integer intVariable = variable.intValue();
You can solve this by having a long stripe that you show in steps, like a filmstrip. Then you can stop the film on any frame. Example below (fiddle available at http://jsfiddle.net/HPXq4/9/):
the markup:
<div class="thumbnail-wrapper">
<img src="blah.jpg">
</div>
the css:
.thumbnail-wrapper{
width:190px;
height:100px;
overflow:hidden;
position:absolute;
}
.thumbnail-wrapper img{
position:relative;
top:0;
}
the js:
var gifTimer;
var currentGifId=null;
var step = 100; //height of a thumbnail
$('.thumbnail-wrapper img').hover(
function(){
currentGifId = $(this)
gifTimer = setInterval(playGif,500);
},
function(){
clearInterval(gifTimer);
currentGifId=null;
}
);
var playGif = function(){
var top = parseInt(currentGifId.css('top'))-step;
var max = currentGifId.height();
console.log(top,max)
if(max+top<=0){
console.log('reset')
top=0;
}
currentGifId.css('top',top);
}
obviously, this can be optimized much further, but I simplified this example for readability
I made a function of the Trident D'Gao answer.
function print(obj) {
console.log(JSON.stringify(obj, null, 4));
}
How to use it
print(obj);
I had this same problem, but my call to $location was ALREADY within a digest. Calling $apply() just gave a $digest already in process error.
This trick worked (and be sure to inject $location
into your controller):
$timeout(function(){
$location...
},1);
Though no idea why this was necessary...
Lots of good suggestions provided by others here, but I don't see a good cross-platform summary. The following should be a good drop in for any Python program:
def isstring(s):
# if we use Python 3
if (sys.version_info[0] >= 3):
return isinstance(s, str)
# we use Python 2
return isinstance(s, basestring)
In this function, we use isinstance(object, classinfo)
to see if our input is a str
in Python 3 or a basestring
in Python 2.
What I found works in the form is str_replace('<br>', PHP_EOL, $textarea);
Amazon provides a policy generator tool:
https://awspolicygen.s3.amazonaws.com/policygen.html
After that, you can enter the policy requirements for the bucket on the AWS console:
I am on the feature branch and made refactorings. I want to merge the master changes now to my feature branch. I am far behind. Note I do not want to pull the master changes to my local because my feature branch have modules moved from one place to another. I found just performing below without pull does not work. it says "Already up to date."
//below does not get the latest from remote master to my local feature branch without git pull
git checkout master
git fetch
git checkout my-feature-branch
git merge master
This below works, note use git merge origin/master:
git checkout master
git fetch
git checkout my-feature-branch
git merge origin/master
Sorry I know this is an old one but still felt like helping out ^_^
Maybe it's the way I read this but assuming the excel sheet 1 is called "London" and has this information; B5="Marleybone" B6="Paddington" B7="Victoria" B8="Hammersmith". And the excel sheet 2 is called "Nottingham" and has this information; C5="Alverton" C6="Annesley" C7="Arnold" C8="Askham". Then I think this code below would work. ^_^
$xlCellTypeLastCell = 11
$startRow = 5
$excel = new-object -com excel.application
$wb = $excel.workbooks.open("C:\users\administrator\my_test.xls")
for ($i = 1; $i -le $wb.sheets.count; $i++)
{
$sh = $wb.Sheets.Item($i)
$endRow = $sh.UsedRange.SpecialCells($xlCellTypeLastCell).Row
$col = $col + $i - 1
$city = $wb.Sheets.Item($i).name
$rangeAddress = $sh.Cells.Item($startRow, $col).Address() + ":" + $sh.Cells.Item($endRow, $col).Address()
$sh.Range($rangeAddress).Value2 | foreach{
New-Object PSObject -Property @{City = $city; Area=$_}
}
}
$excel.Workbooks.Close()
This should be the output (without the commas):
City, Area
---- ----
London, Marleybone
London, Paddington
London, Victoria
London, Hammersmith
Nottingham, Alverton
Nottingham, Annesley
Nottingham, Arnold
Nottingham, Askham
I wanted it with date and the time but no seconds so I used this:
var dateWithoutSecond = new Date();
dateWithoutSecond.toLocaleTimeString([], {year: 'numeric', month: 'numeric', day: 'numeric', hour: '2-digit', minute: '2-digit'});
It produced the following output:
7/29/2020, 2:46 PM
Which was the exact thing I needed. Worked in FireFox.
If you are using JPA 2.0, you can now use the orphanRemoval=true
attribute of the @xxxToMany
annotation to remove orphans.
Actually, CascadeType.DELETE_ORPHAN
has been deprecated in 3.5.2-Final.
The Visual Studio Development Server option applies only when you are running (testing) the Web project in Visual Studio. Production Web applications always run under IIS.
To specify the Web server for a Web site project
- In Solution Explorer, right-click the name of the Web site project for which you want to specify a Web server, and then click Property Pages.
- In the Property Pages dialog box, click the Start Options tab.
- Under Server, click Use custom server.
- In the Base URL box, type the URL that Visual Studio should start when running the current project.
Note: If you specify the URL of a remote server (for example, an IIS Web application on another computer), be sure that the remote server is running at least the .NET Framework version 2.0.
To specify the Web server for a Web application project
- In Solution Explorer, right-click the name of the Web application project for which you want to specify a Web server, and then click Properties.
- In the Properties window, click the Web tab.
- Under Servers, click Use Visual Studio Development Server or Use Local IIS Web server or Use Custom Web server.
- If you clicked Local IIS Web server or Use Custom Web Server, in the Base URL box, type the URL that Visual Studio should start when running the current project.
Note: If you clicked Use Custom Web Server and specify the URL of a remote server (for example, an IIS Web application on another computer), be sure that the remote server is running at least the .NET Framework version 2.0.
(Source: https://msdn.microsoft.com/en-us/library/ms178108.aspx)
We have this issue as well (or a variant).
Try the following:
1) Add a timeout to p.WaitForExit(nnnn); where nnnn is in milliseconds.
2) Put the ReadToEnd call before the WaitForExit call. This is what we've seen MS recommend.
If you just want to do a form POST to your own site using $.ajax()
(for example, to emulate an AJAX experience), then you can use the jQuery Form Plugin. However, if you need to do a form POST to a different domain, or to your own domain but using a different protocol (a non-secure http:
page posting to a secure https:
page), then you'll come upon cross-domain scripting restrictions that you won't be able to resolve with jQuery alone (more info). In such cases, you'll need to bring out the big guns: YQL. Put plainly, YQL is a web scraping language with a SQL-like syntax that allows you to query the entire internet as one large table. As it stands now, in my humble opinion YQL is the only [easy] way to go if you want to do cross-domain form POSTing using client-side JavaScript.
More specifically, you'll need to use YQL's Open Data Table containing an Execute block to make this happen. For a good summary on how to do this, you can read the article "Scraping HTML documents that require POST data with YQL". Luckily for us, YQL guru Christian Heilmann has already created an Open Data Table that handles POST data. You can play around with Christian's "htmlpost" table on the YQL Console. Here's a breakdown of the YQL syntax:
select *
- select all columns, similar to SQL, but in this case the columns are XML elements or JSON objects returned by the query. In the context of scraping web pages, these "columns" generally correspond to HTML elements, so if want to retrieve only the page title, then you would use select head.title
.from htmlpost
- what table to query; in this case, use the "htmlpost" Open Data Table (you can use your own custom table if this one doesn't suit your needs).url="..."
- the form's action
URI.postdata="..."
- the serialized form data.xpath="..."
- the XPath of the nodes you want to include in the response. This acts as the filtering mechanism, so if you want to include only <p>
tags then you would use xpath="//p"
; to include everything you would use xpath="//*"
.Click 'Test' to execute the YQL query. Once you are happy with the results, be sure to (1) click 'JSON' to set the response format to JSON, and (2) uncheck "Diagnostics" to minimize the size of the JSON payload by removing extraneous diagnostics information. The most important bit is the URL at the bottom of the page -- this is the URL you would use in a $.ajax()
statement.
Here, I'm going to show you the exact steps to do a cross-domain form POST via a YQL query using this sample form:
<form id="form-post" action="https://www.example.com/add/member" method="post">
<input type="text" name="firstname">
<input type="text" name="lastname">
<button type="button" onclick="doSubmit()">Add Member</button>
</form>
Your JavaScript would look like this:
function doSubmit() {
$.ajax({
url: '//query.yahooapis.com/v1/public/yql?q=select%20*%20from%20htmlpost%20where%0Aurl%3D%22' +
encodeURIComponent($('#form-post').attr('action')) + '%22%20%0Aand%20postdata%3D%22' +
encodeURIComponent($('#form-post').serialize()) +
'%22%20and%20xpath%3D%22%2F%2F*%22&format=json&env=store%3A%2F%2Fdatatables.org%2Falltableswithkeys&callback=',
dataType: 'json', /* Optional - jQuery autodetects this by default */
success: function(response) {
console.log(response);
}
});
}
The url
string is the query URL copied from the YQL Console, except with the form's encoded action
URI and serialized input data dynamically inserted.
NOTE: Please be aware of security implications when passing sensitive information over the internet. Ensure the page you are submitting sensitive information from is secure (https:
) and using TLS 1.x instead of SSL 3.0.
You can use stored procedure in this way..
DELIMITER |
CREATE PROCEDURE explode( pDelim VARCHAR(32), pStr TEXT)
BEGIN
DROP TABLE IF EXISTS temp_explode;
CREATE TEMPORARY TABLE temp_explode (id INT AUTO_INCREMENT PRIMARY KEY NOT NULL, word VARCHAR(40));
SET @sql := CONCAT('INSERT INTO temp_explode (word) VALUES (', REPLACE(QUOTE(pStr), pDelim, '\'), (\''), ')');
PREPARE myStmt FROM @sql;
EXECUTE myStmt;
END |
DELIMITER ;
example call:
SET @str = "The quick brown fox jumped over the lazy dog";
SET @delim = " ";
CALL explode(@delim,@str);
SELECT id,word FROM temp_explode;
Using the php cURL libraries will probably be the right way to go, as this library has more features than the simple file_get_contents(...)
.
An example:
<?php
$ch = curl_init();
$headers = array('HTTP_ACCEPT: Something', 'HTTP_ACCEPT_LANGUAGE: fr, en, da, nl', 'HTTP_CONNECTION: Something');
curl_setopt($ch, CURLOPT_URL, "http://localhost"); # URL to post to
curl_setopt($ch, CURLOPT_RETURNTRANSFER, 1 ); # return into a variable
curl_setopt($ch, CURLOPT_HTTPHEADER, $header ); # custom headers, see above
$result = curl_exec( $ch ); # run!
curl_close($ch);
?>
private int user_movie_matrix[][];Th
. should be `private int user_movie_matrix[][];
.
private int user_movie_matrix[][];
should be private static int user_movie_matrix[][];
cfiltering(numberOfUsers, numberOfMovies);
should be new cfiltering(numberOfUsers, numberOfMovies);
Whether or not the code works as intended after these changes is beyond the scope of this answer; there were several syntax/scoping errors.
The simplest solution would be open terminal
$ java -version
it shows the following
java version "1.6.0_65"
$ cd /System/Library/Frameworks/JavaVM.framework/Versions
$ ls -l
Below is the last line of output:
lrwxr-xr-x 1 root wheel 59 Feb 12 14:57 CurrentJDK -> /System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents
1.6.0.jdk would be the answer
change type="number" to type="tel"
The com.recoyxgroup.javascript.enum package allows you to properly define enum and flags enum classes, where:
{ _value: someNumber }
constantName
)someNumber
)E.prototype
.Wherever a specific enum is expected, the convention is to do E(v)
, like this:
const { FlagsEnum } from 'com.recoyxgroup.javascript.enum';
const Rights = FlagsEnum('Rights', [
'ADMINISTRATION',
'REVIEW',
]);
function fn(rights) {
rights = Rights(rights);
console.log('administration' in rights, 'review' in rights);
}
fn( ['administration', 'review'] ); // true true
fn( 'administration' ); // true false
fn( undefined ); // false false
var r = Rights.ADMINISTRATION;
console.log( r == 'administration' );
As you can see, you can still compare the value to a String.
Definitions can be more specific:
const E = FlagsEnum('E', [
['Q', 0x10],
['K', 'someB'],
['L', [0x40, 'someL']],
]);
FlagsEnum products > Instance properties/methods
I come here some years after, and I could fix it thanks to atrain's comment above. In my case, I was missing @Valid
in the API that receives the Object (a POJO in my case) that was annotated with @Size
. It solved the issue.
I did not need to add any extra annotation, such as @Valid
or @NotBlank
to the variable annotated with @Size
, just that constraint in the variable and what I mentioned in the API...
Pojo Class:
...
@Size(min = MIN_LENGTH, max = MAX_LENGTH);
private String exampleVar;
...
API Class:
...
public void exampleApiCall(@RequestBody @Valid PojoObject pojoObject){
...
}
Thanks and cheers
You haven't mentioned a language, so I'm going to give you some some hints how to do it with the straight Windows API in C.
First, open a connection to the printer with OpenPrinter
. Next, start a document with StartDocPrinter
having the pDatatype
field of the DOC_INFO_1
structure set to "RAW"
- this tells the printer driver not to encode anything going to the printer, but to pass it along unchanged. Use StartPagePrinter
to indicate the first page, WritePrinter
to send the data to the printer, and close it with EndPagePrinter
, EndDocPrinter
and ClosePrinter
when done.
If you want to use names, try a namedtuple:
from collections import namedtuple
Pair = namedtuple("Pair", ["first", "second"])
pairs = [Pair("a", 1), Pair("b", 2), Pair("c", 3)]
for pair in pairs:
print("First = {}, second = {}".format(pair.first, pair.second))
Assuming your byte1
is a byte(8bits), When you do a bitwise AND of a byte with 0xFF, you are getting the same byte.
So byte1
is the same as byte1 & 0xFF
Say byte1
is 01001101
, then byte1 & 0xFF = 01001101 & 11111111 = 01001101 = byte1
If byte1 is of some other type say integer of 4 bytes, bitwise AND with 0xFF leaves you with least significant byte(8 bits) of the byte1.
Make sure you have the latest values in your gradle files. As of this writing:
buildToolsVersion "21.1.2"
dependencies { classpath 'com.android.tools.build:gradle:1.1.0' }
Use a subquery in the where clause. For a delete query requirig a join, this example will delete rows that are unmatched in the joined table "docx_document" and that have a create date > 120 days in the "docs_documents" table.
delete from docs_documents d
where d.id in (
select a.id from docs_documents a
left join docx_document b on b.id = a.document_id
where b.id is null
and floor(sysdate - a.create_date) > 120
);
You can try returning the variable you wish to inspect. E.g. I have this function:
--Contencates seperate date and time strings and converts to a datetime. Date should be in format 25.03.2012. Time as 9:18:25.
ALTER FUNCTION [dbo].[ufn_GetDateTime] (@date nvarchar(11), @time nvarchar(11))
RETURNS datetime
AS
BEGIN
--select dbo.ufn_GetDateTime('25.03.2012.', '9:18:25')
declare @datetime datetime
declare @day_part nvarchar(3)
declare @month_part nvarchar(3)
declare @year_part nvarchar(5)
declare @point_ix int
set @point_ix = charindex('.', @date)
set @day_part = substring(@date, 0, @point_ix)
set @date = substring(@date, @point_ix, len(@date) - @point_ix)
set @point_ix = charindex('.', @date)
set @month_part = substring(@date, 0, @point_ix)
set @date = substring(@date, @point_ix, len(@date) - @point_ix)
set @point_ix = charindex('.', @date)
set @year_part = substring(@date, 0, @point_ix)
set @datetime = @month_part + @day_part + @year_part + ' ' + @time
return @datetime
END
When I run it.. I get: Msg 241, Level 16, State 1, Line 1 Conversion failed when converting date and/or time from character string.
Arghh!!
So, what do I do?
ALTER FUNCTION [dbo].[ufn_GetDateTime] (@date nvarchar(11), @time nvarchar(11))
RETURNS nvarchar(22)
AS
BEGIN
--select dbo.ufn_GetDateTime('25.03.2012.', '9:18:25')
declare @day_part nvarchar(3)
declare @point_ix int
set @point_ix = charindex('.', @date)
set @day_part = substring(@date, 0, @point_ix)
return @day_part
END
And I get '25'. So, I am off by one and so I change to..
set @day_part = substring(@date, 0, @point_ix + 1)
Voila! Now it works :)
i got tired of it always detaching so i just use a shell script to build it out for all my modules. i assume all submodules are on master: here is the script:
#!/bin/bash
echo "Good Day Friend, building all submodules while checking out from MASTER branch."
git submodule update
git submodule foreach git checkout master
git submodule foreach git pull origin master
execute it from your parent module
Yet another method, using StringTokenizer :
String s = "I want to walk my dog";
StringTokenizer tokenizer = new StringTokenizer(s);
while(tokenizer.hasMoreTokens()) {
System.out.println(tokenizer.nextToken());
}
You can't initialize arrays like this:
int cipher[Array_size][Array_size]=0;
The syntax for 2D arrays is:
int cipher[Array_size][Array_size]={{0}};
Note the curly braces on the right hand side of the initialization statement.
for 1D arrays:
int tomultiply[Array_size]={0};
No, I don't know one.
If you want to retain the original directory for some reason (ACLs, &c.), and instead really want to empty it, then you can do the following:
del /q destination\*
for /d %x in (destination\*) do @rd /s /q "%x"
This first removes all files from the directory, and then recursively removes all nested directories, but overall keeping the top-level directory as it is (except for its contents).
Note that within a batch file you need to double the %
within the for
loop:
del /q destination\*
for /d %%x in (destination\*) do @rd /s /q "%%x"
use the builtin: (no need for tkinter)
s = input('->>')
print(s) # what you just typed); now use if's
Approach 2 will always return a count that matches your result set.
I suggest you link the sub-query to your outer query though, to guarantee that the condition on your count matches the condition on the dataset.
SELECT
mt.my_row,
(SELECT COUNT(mt2.my_row) FROM my_table mt2 WHERE mt2.foo = mt.foo) as cnt
FROM my_table mt
WHERE mt.foo = 'bar';
Coupling = interaction / relationship between two modules... Cohesion = interaction between two elements within a module.
A software is consisting of many modules. Module consists of elements. Consider a module is a program. A function within a program is a element.
At run time, output of a program is used as input for another program. This is called module to module interaction or process to process communication. This is also called as Coupling.
Within a single program, output of a function is passed to another function. This is called interaction of elements within a module. This is also called as Cohesion.
Example:
Coupling = communication in between 2 different families... Cohesion = communication in between father-mother-child within a family.
I use:
from site import addsitedir
Then, can use any relative directory !
addsitedir('..\lib')
; the two dots implies move (up) one directory first.
Remember that it all depends on what your current working directory your starting from. If C:\Joe\Jen\Becky, then addsitedir('..\lib') imports to your path C:\Joe\Jen\lib
C:\
|__Joe
|_ Jen
| |_ Becky
|_ lib
ID is an attribute, you can set it with the attr function:
$(element).attr('id', 'newID');
I'm not sure what you mean about adding IDs since an element can only have one identifier and this identifier must be unique.
ANother option could be to post the image to a webapp (possibly at a later moment), and have it OCR-processed there without the C++ -> Java port issues and possibly clogging the mobile CPU.
Quite old post, but it might help somebody new into git.
I will go with
git rebase master
If you want to pass multiple values to RS via a query string all you need to do is repeat the report parameter for each value.
For example; I have a RS column called COLS and this column expects one or more values.
&rp:COLS=1&rp:COLS=1&rp:COLS=5 etc..
or in a better way we can have like this
Let's say your primary key is an Integer and object you save is "ticket", then you can get it like this. When you save the object, id is always returned
//unboxing will occur here so that id here will be value type not the reference type. Now you can check id for 0 in case of save failure. like below:
int id = (Integer) session.save(ticket);
if(id==0)
your session.save call was not success.
else '
your call to session.save was successful.
Also note that "in" keyword does not work on arrays. It works on objects only.
propName in myObject
Array inclusion test is
myArray.includes('three');
You can't run this particular piece of code in the interactive interpreter. You'll need to save it into a file first so that you can pass the argument to it like this
$ python hello.py user338690
"Any CPU" means that when the program is started, the .NET Framework will figure out, based on the OS bitness, whether to run your program in 32 bits or 64 bits.
There is a difference between x86 and Any CPU: on a x64 system, your executable compiled for X86 will run as a 32-bit executable.
As far as your suspicions go, just go to the Visual Studio 2008 command line and run the following.
dumpbin YourProgram.exe /headers
It will tell you the bitness of your program, plus a whole lot more.
The efficient way to do that is just to cast to a generic Map as follows:
Properties props = new Properties();
Map<String, String> map = (Map)props;
This will convert a Map<Object, Object>
to a raw Map, which is "ok" for the compiler (only warning). Once we have a raw Map
it will cast to Map<String, String>
which it also will be "ok" (another warning). You can ignore them with annotation @SuppressWarnings({ "unchecked", "rawtypes" })
This will work because in the JVM the object doesn't really have a generic type. Generic types are just a trick that verifies things at compile time.
If some key or value is not a String it will produce a ClassCastException
error. With current Properties
implementation this is very unlikely to happen, as long as you don't use the mutable call methods from the super Hashtable<Object,Object>
of Properties
.
So, if don't do nasty things with your Properties instance this is the way to go.
You have to add the original repo as an upstream.
It is all well described here: https://help.github.com/articles/fork-a-repo
git remote add upstream https://github.com/octocat/Spoon-Knife.git
git fetch upstream
git merge upstream/master
git push origin master
Have you googled about it - insert update delete access vb.net, there are lots of reference about this.
Insert Update Delete Navigation & Searching In Access Database Using VB.NET
what could be the easier way to connect and manipulate the DB?
Use OleDBConnection class to make connection with DB
is it by using MS ACCESS 2003 or MS ACCESS 2007?
you can use any you want to use or your client will use on their machine.
it seems that you want to find some example of opereations fo the database. Here is an example of Access 2010 for your reference:
Example code snippet:
Imports System
Imports System.Data
Imports System.Data.OleDb
Public Class DBUtil
Private connectionString As String
Public Sub New()
Dim con As New OleDb.OleDbConnection
Dim dbProvider As String = "Provider=Microsoft.ace.oledb.12.0;"
Dim dbSource = "Data Source=d:\DB\Database11.accdb"
connectionString = dbProvider & dbSource
End Sub
Public Function GetCategories() As DataSet
Dim query As String = "SELECT * FROM Categories"
Dim cmd As New OleDbCommand(query)
Return FillDataSet(cmd, "Categories")
End Function
Public SubUpdateCategories(ByVal name As String)
Dim query As String = "update Categories set name = 'new2' where name = ?"
Dim cmd As New OleDbCommand(query)
cmd.Parameters.AddWithValue("Name", name)
Return FillDataSet(cmd, "Categories")
End Sub
Public Function GetItems() As DataSet
Dim query As String = "SELECT * FROM Items"
Dim cmd As New OleDbCommand(query)
Return FillDataSet(cmd, "Items")
End Function
Public Function GetItems(ByVal categoryID As Integer) As DataSet
'Create the command.
Dim query As String = "SELECT * FROM Items WHERE Category_ID=?"
Dim cmd As New OleDbCommand(query)
cmd.Parameters.AddWithValue("category_ID", categoryID)
'Fill the dataset.
Return FillDataSet(cmd, "Items")
End Function
Public Sub AddCategory(ByVal name As String)
Dim con As New OleDbConnection(connectionString)
'Create the command.
Dim insertSQL As String = "INSERT INTO Categories "
insertSQL &= "VALUES(?)"
Dim cmd As New OleDbCommand(insertSQL, con)
cmd.Parameters.AddWithValue("Name", name)
Try
con.Open()
cmd.ExecuteNonQuery()
Finally
con.Close()
End Try
End Sub
Public Sub AddItem(ByVal title As String, ByVal description As String, _
ByVal price As Decimal, ByVal categoryID As Integer)
Dim con As New OleDbConnection(connectionString)
'Create the command.
Dim insertSQL As String = "INSERT INTO Items "
insertSQL &= "(Title, Description, Price, Category_ID)"
insertSQL &= "VALUES (?, ?, ?, ?)"
Dim cmd As New OleDb.OleDbCommand(insertSQL, con)
cmd.Parameters.AddWithValue("Title", title)
cmd.Parameters.AddWithValue("Description", description)
cmd.Parameters.AddWithValue("Price", price)
cmd.Parameters.AddWithValue("CategoryID", categoryID)
Try
con.Open()
cmd.ExecuteNonQuery()
Finally
con.Close()
End Try
End Sub
Private Function FillDataSet(ByVal cmd As OleDbCommand, ByVal tableName As String) As DataSet
Dim con As New OleDb.OleDbConnection
Dim dbProvider As String = "Provider=Microsoft.ace.oledb.12.0;"
Dim dbSource = "Data Source=D:\DB\Database11.accdb"
connectionString = dbProvider & dbSource
con.ConnectionString = connectionString
cmd.Connection = con
Dim adapter As New OleDbDataAdapter(cmd)
Dim ds As New DataSet()
Try
con.Open()
adapter.Fill(ds, tableName)
Finally
con.Close()
End Try
Return ds
End Function
End Class
Refer these links:
Insert, Update, Delete & Search Values in MS Access 2003 with VB.NET 2005
INSERT, DELETE, UPDATE AND SELECT Data in MS-Access with VB 2008
How Add new record ,Update record,Delete Records using Vb.net Forms when Access as a back
Option one is using
this.setState(prevState => ({
arrayvar: [...prevState.arrayvar, newelement]
}))
Option 2:
this.setState({
arrayvar: this.state.arrayvar.concat([newelement])
})
I tried this code below and it's working fine
SELECT TimeTrackEmployee.StaffID
FROM dbo.tblGBSTimeCard AS GBSTimeCard INNER JOIN
TimeTrak.dbo.tblEmployee AS TimeTrackEmployee ON GBSTimeCard.[Employee Number] = TimeTrackEmployee.GBSStaffID
I suppose rgba()
would work here. After all, browser support for both box-shadow
and rgba()
is roughly the same.
/* 50% black box shadow */
box-shadow: 10px 10px 10px rgba(0, 0, 0, 0.5);
div {_x000D_
width: 200px;_x000D_
height: 50px;_x000D_
line-height: 50px;_x000D_
text-align: center;_x000D_
color: white;_x000D_
background-color: red;_x000D_
margin: 10px;_x000D_
}_x000D_
_x000D_
div.a {_x000D_
box-shadow: 10px 10px 10px #000;_x000D_
}_x000D_
_x000D_
div.b {_x000D_
box-shadow: 10px 10px 10px rgba(0, 0, 0, 0.5);_x000D_
}
_x000D_
<div class="a">100% black shadow</div>_x000D_
<div class="b">50% black shadow</div>
_x000D_
You can do
var color = System.Drawing.ColorTranslator.FromHtml("#FFFFFF");
Or this (you will need the System.Windows.Media
namespace)
var color = (Color)ColorConverter.ConvertFromString("#FFFFFF");
Declare object of EditText on top of class:
EditText myEditText;
Find EditText in onCreate Function and setOnFocusChangeListener of EditText:
myEditText = findViewById(R.id.yourEditTextNameInxml);
myEditText.setOnFocusChangeListener(new View.OnFocusChangeListener() {
@Override
public void onFocusChange(View view, boolean hasFocus) {
if (!hasFocus) {
Toast.makeText(this, "Focus Lose", Toast.LENGTH_SHORT).show();
}else{
Toast.makeText(this, "Get Focus", Toast.LENGTH_SHORT).show();
}
}
});
It works fine.
You can just do a cast
int val1 = 1;
float val2 = (float)val1;
or
decimal val3 = 3;
float val4 = (float)val3;
UUID is just a number. It has no meaning except you create on the server side of an Android app. Then the client connects using that same UUID.
For example, on the server side you can first run uuid = UUID.randomUUID() to generate a random number like fb36491d-7c21-40ef-9f67-a63237b5bbea. Then save that and then hard code that into your listener program like this:
UUID uuid = UUID.fromString("fb36491d-7c21-40ef-9f67-a63237b5bbea");
Your Android server program will listen for incoming requests with that UUID like this:
BluetoothServerSocket server = mBluetoothAdapter.listenUsingRfcommWithServiceRecord("anyName", uuid);
BluetoothSocket socket = server.accept();
You can adding a +
before the string without using parseInt and parseFloat and radix, Simply
sample:
var votevalue = +$('button').data('votevalue');
alert(typeof(votevalue));
How about
apply(df, 1, function(r) any(r %in% c("M017", "M018")))
The ith element will be TRUE
if the ith row contains one of the values, and FALSE
otherwise. Or, if you want just the row numbers, enclose the above statement in which(...)
.
This 
should work if you just use a simple title attribute.
on bootstrap popovers, just use data-html="true"
and use html in the data-content
attribute .
<div title="Hello 
World">hover here</div>
_x000D_
Use a semaphore with a count that is equal to the number of readers. Let each reader take one count of the semaphore in order to read, that way they can all read at the same time. Then let the writer take ALL the semaphore counts prior to writing. This causes the writer to wait for all reads to finish and then block out reads while writing.
Many developers include files by pointing to a remote URL, even if the file is within the local system. For example:
<php include("http://example.com/includes/example_include.php"); ?>
With allow_url_include disabled, this method does not work. Instead, the file must be included with a local path, and there are three methods of doing this:
By using a relative path, such as ../includes/example_include.php
.
By using an absolute path (also known as relative-from-root), such as /home/username/example.com/includes/example_include.php.
By using the PHP environment variable $_SERVER['DOCUMENT_ROOT']
, which returns the absolute path to the web root directory. This is by far the best (and most portable) solution. The following example shows the environment variable in action.
Example Include
<?php include($_SERVER['DOCUMENT_ROOT']."/includes/example_include.php"); ?>
Here is what I use. All of these are in the Central and have sources.
For Tomcat 7 (Java 7, Servlet 3.0)
Note - Servlet, JSP and EL APIs are provided in Tomcat. Only JSTL (if used) needs to be bundled with the web app.
<dependency>
<groupId>javax.servlet</groupId>
<artifactId>javax.servlet-api</artifactId>
<version>3.0.1</version>
<scope>provided</scope>
</dependency>
<dependency>
<groupId>javax.servlet.jsp</groupId>
<artifactId>jsp-api</artifactId>
<version>2.2</version>
<scope>provided</scope>
</dependency>
<dependency>
<groupId>javax.el</groupId>
<artifactId>javax.el-api</artifactId>
<version>2.2.4</version>
<scope>provided</scope>
</dependency>
<dependency>
<groupId>javax.servlet</groupId>
<artifactId>jstl</artifactId>
<version>1.2</version>
</dependency>
For Tomcat 8 (Java 8, Servlet 3.1)
<dependency>
<groupId>javax.servlet</groupId>
<artifactId>javax.servlet-api</artifactId>
<version>3.1.0</version>
<scope>provided</scope>
</dependency>
<dependency>
<groupId>javax.servlet.jsp</groupId>
<artifactId>javax.servlet.jsp-api</artifactId>
<version>2.3.0</version>
<scope>provided</scope>
</dependency>
<dependency>
<groupId>javax.el</groupId>
<artifactId>javax.el-api</artifactId>
<version>3.0.0</version>
<scope>provided</scope>
</dependency>
<dependency>
<groupId>javax.servlet</groupId>
<artifactId>jstl</artifactId>
<version>1.2</version>
</dependency>
For self-containing Maven project I usually installing all external jar dependencies into project's repository. For SQL Server JDBC driver you can do:
local-repo
in your Maven projectsqljdbc42.jar
into local-repo
folderlocal-repo
folder run mvn deploy:deploy-file -Dfile=sqljdbc42.jar -DartifactId=sqljdbc42 -DgroupId=com.microsoft.sqlserver -DgeneratePom=true -Dpackaging=jar -Dversion=6.0.7507.100 -Durl=file://.
to deploy JAR into local repository (stored together with your code in SCM)sqljdbc42.jar
and downloaded files can be deletedpom.xml
and add reference to project's local repository:
xml
<repositories>
<repository>
<id>parent-local-repository</id>
<name>Parent Local repository</name>
<layout>default</layout>
<url>file://${basedir}/local-repo</url>
<releases>
<enabled>true</enabled>
</releases>
<snapshots>
<enabled>true</enabled>
</snapshots>
</repository>
</repositories>
Now you can run your project everywhere without any additional configurations or installations.There is another asynchronous way use Blob and FileReader.
I didn't test the performance. But it is a different way of thinking.
function arrayBufferToBase64( buffer, callback ) {
var blob = new Blob([buffer],{type:'application/octet-binary'});
var reader = new FileReader();
reader.onload = function(evt){
var dataurl = evt.target.result;
callback(dataurl.substr(dataurl.indexOf(',')+1));
};
reader.readAsDataURL(blob);
}
//example:
var buf = new Uint8Array([11,22,33]);
arrayBufferToBase64(buf, console.log.bind(console)); //"CxYh"
I used something that resembles singleton pattern:
function myclass() = {
var instance = this;
this.Days = function() {
var days = ["Piatek", "Sobota", "Niedziela"];
return days;
}
this.EventTime = function(day, hours, minutes) {
this.Day = instance.Days()[day];
this.Hours = hours;
this.minutes = minutes;
this.TotalMinutes = day*24*60 + 60*hours + minutes;
}
}
According to bitbucket knowledgebase it may also be caused by the owner of the repository being over the plan limit.
If you look further down the page it seems to also be possible to trig this error by using a too old git version (1.7 is needed at the moment).
Create List of Single Item Repeated n Times in Python
Depending on your use-case, you want to use different techniques with different semantics.
For immutable items, like None, bools, ints, floats, strings, tuples, or frozensets, you can do it like this:
[e] * 4
Note that this is usually only used with immutable items (strings, tuples, frozensets, ) in the list, because they all point to the same item in the same place in memory. I use this frequently when I have to build a table with a schema of all strings, so that I don't have to give a highly redundant one to one mapping.
schema = ['string'] * len(columns)
Multiplying a list gives us the same elements over and over. The need for this is rare:
[iter(iterable)] * 4
This is sometimes used to map an iterable into a list of lists:
>>> iterable = range(12)
>>> a_list = [iter(iterable)] * 4
>>> [[next(l) for l in a_list] for i in range(3)]
[[0, 1, 2, 3], [4, 5, 6, 7], [8, 9, 10, 11]]
We can see that a_list
contains the same range iterator four times:
>>> a_list
[<range_iterator object at 0x7fde73a5da20>, <range_iterator object at 0x7fde73a5da20>, <range_iterator object at 0x7fde73a5da20>, <range_iterator object at 0x7fde73a5da20>]
I've used Python for a long time now, and I have seen very few use-cases where I would do the above with mutable objects.
Instead, to get, say, a mutable empty list, set, or dict, you should do something like this:
list_of_lists = [[] for _ in columns]
The underscore is simply a throwaway variable name in this context.
If you only have the number, that would be:
list_of_lists = [[] for _ in range(4)]
The _
is not really special, but your coding environment style checker will probably complain if you don't intend to use the variable and use any other name.
Beware doing this with mutable objects, when you change one of them, they all change because they're all the same object:
foo = [[]] * 4
foo[0].append('x')
foo now returns:
[['x'], ['x'], ['x'], ['x']]
But with immutable objects, you can make it work because you change the reference, not the object:
>>> l = [0] * 4
>>> l[0] += 1
>>> l
[1, 0, 0, 0]
>>> l = [frozenset()] * 4
>>> l[0] |= set('abc')
>>> l
[frozenset(['a', 'c', 'b']), frozenset([]), frozenset([]), frozenset([])]
But again, mutable objects are no good for this, because in-place operations change the object, not the reference:
l = [set()] * 4
>>> l[0] |= set('abc')
>>> l
[set(['a', 'c', 'b']), set(['a', 'c', 'b']), set(['a', 'c', 'b']), set(['a', 'c', 'b'])]
May be you are using this checking :
if (Build.VERSION.SDK_INT < Build.VERSION_CODES.KITKAT) {
}
To resolve this you need to import android.provider.DocumentsContract
class.
To resolve this issue you'll need to set the build SDK version to 19 (4.4) or higher to have API level 19 symbols available while compiling.
First, use the SDK Manager to download API 19 if you don't have it yet. Then, configure your project to use API 19:
I found this answer from here
Thanks .
As the PHP.net manual suggests, take a read of this discussion.
One major difference is that echo
can take multiple parameters to output. E.g.:
echo 'foo', 'bar'; // Concatenates the 2 strings
print('foo', 'bar'); // Fatal error
If you're looking to evaluate the outcome of an output statement (as below) use print
. If not, use echo
.
$res = print('test');
var_dump($res); //bool(true)
Possible solutions is put your dependencies in src/main/resources then in your pom :
<dependency>
groupId ...
artifactId ...
version ...
<scope>system</scope>
<systemPath>${project.basedir}/src/main/resources/yourJar.jar</systemPath>
</dependency>
Note: system dependencies are not copied into resulted jar/war
(see How to include system dependencies in war built using maven)
Try redis, it is one of the cleanest and easiest solutions for applications to share data in a atomic way or if you have got some web server platform. Its very easy to setup, you will need a python redis client http://pypi.python.org/pypi/redis
It is “old-fashioned” way to specify ranges of revisions you wish to merge. With 1.5+ you can use:
svn merge HEAD url/of/trunk path/to/branch/wc
This one works for me
CREATE Function [dbo].[RemoveNumericCharacters](@Temp VarChar(1000))
Returns VarChar(1000)
AS
Begin
Declare @NumRange as varchar(50) = '%[0-9]%'
While PatIndex(@NumRange, @Temp) > 0
Set @Temp = Stuff(@Temp, PatIndex(@NumRange, @Temp), 1, '')
Return @Temp
End
and you can use it like so
SELECT dbo.[RemoveNumericCharacters](Name) FROM TARGET_TABLE
Codeslave asks "Shouldn't it always be "$ORACLE_ HOME/network/admin/tnsnames.ora"? The answer is no, it isn't. Consider these two invocations of tnsping on the same machine:
C:\Documents and Settings\me>D:\Oracle\10.2.0_DB\BIN\tnsping orcl
TNS Ping Utility for 32-bit Windows: Version 10.2.0.4.0 - Production on 09-OCT-2
008 14:30:12
Copyright (c) 1997, 2007, Oracle. All rights reserved.
Used parameter files:
D:\Oracle\10.2.0_DB\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = xxxx
)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = ORCL)))
OK (40 msec)
C:\Documents and Settings\me>tnsping orcl
TNS Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production on 09-OCT-2
008 14:30:21
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
D:\oracle\10.2.0_Client\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)
(HOST = XXXX)(PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = ORCL)))
OK (20 msec)
C:\Documents and Settings\me>
Note the two different parameter file locations, that are dependent on which tnsping executable you're running (and perhaps where it's being run from). For tnsnames-based oracle networking, using the TNS_ADMIN variable is the only way to ensure you're getting a consistent tnsnames.ora file. (NOTE: Windows-centric answer)
If you should need to replace the handle with something else entirely, rather than just restyling it:
$('.slider').append('<div class="my-handle ui-slider-handle"><svg height="18" width="14"><path d="M13,9 5,1 A 10,10 0, 0, 0, 5,17z"/></svg></div>');_x000D_
_x000D_
$('.slider').slider({_x000D_
range: "min",_x000D_
value: 10_x000D_
});
_x000D_
.slider .ui-state-default {_x000D_
background: none;_x000D_
}_x000D_
.slider.ui-slider .ui-slider-handle {_x000D_
width: 14px;_x000D_
height: 18px;_x000D_
margin-left: -5px;_x000D_
top: -4px;_x000D_
border: none;_x000D_
background: none;_x000D_
}_x000D_
.slider {_x000D_
height: 10px;_x000D_
}
_x000D_
<script src="https://ajax.googleapis.com/ajax/libs/jquery/1.9.1/jquery.min.js"></script>_x000D_
<script src="https://code.jquery.com/ui/1.9.1/jquery-ui.min.js"></script>_x000D_
<link href="https://code.jquery.com/ui/1.9.2/themes/base/jquery-ui.css" rel="stylesheet" />_x000D_
<div class="slider"></div>
_x000D_
I just made some tests in node.js v4.2.4 (but this is true in any javascript implementation):
> typeof NaN
'number'
> isNaN(NaN)
true
> isNaN("hello")
true
the surprise is the first one as type of NaN is "number", but that is how it is defined in javascript.
So the next test brings up unexpected result
> typeof Number("hello")
"number"
because Number("hello") is NaN
The following function makes results as expected:
function isNumeric(n){
return (typeof n == "number" && !isNaN(n));
}
I had the same problem but now here is how I solved it
Go to https://developers.facebook.com/
• Click on the Apps menu on the top bar.
• Select the respective app from the drop down.
• Click Settings from the table in the left side of the page
• Then under the Contact Email type in your email you would like to use
• Then click save settings button
• Go to 'Status & Review' from the table in the left side of the page.
• Do you want to make this app and all its live features available to the general public? - Select switch to set YES/NO value.
Bluetooth 4.0 Allows you in a Bluetooth piconet one master can communicate up to 7 active slaves, there can be some other devices up to 248 devices which sleeping.
Also you can use some slaves as bridge to participate with more devices.
CSS
If this doesn't work:
.modal-backdrop {
background-color: red;
}
try this:
.modal {
background-color: red !important;
}
I don't have an 11g instance available today but could you not use:
SELECT group_id,
LISTAGG(name, ',') WITHIN GROUP (ORDER BY name) AS names
FROM (
SELECT UNIQUE
group_id,
name
FROM demotable
)
GROUP BY group_id
for i in range(10):
print(i, end = ' ')
You can provide any delimiter to the end field (space, comma etc.)
This is for Python 3
Ultimately, this is completely platform-dependent. Unicode-support is, unfortunately, very poor in Standard C++. For GCC, you will have to make it a narrow string, as they use UTF-8, and Windows wants a wide string, and you must output to wcout
.
// GCC
std::cout << "?";
// Windoze
wcout << L"?";
The easiest might be:
Array(1, 2, 3) :+ 4
Actually, Array can be implcitly transformed in a WrappedArray
Here the code where you can delete file/image from folder.
var fs = require('fs');
Gallery.findById({ _id: req.params.id},function(err,data){
if (err) throw err;
fs.unlink('public/gallery/'+data.image_name);
});
I found that the cleanest way to do this is to create a custom TwigExtension and override its getGlobals()
method. Rather than using $_SESSION
, it's also better to use Symfony's Session
class since it handles automatically starting/stopping the session.
I've got the following extension in /src/AppBundle/Twig/AppExtension.php:
<?php
namespace AppBundle\Twig;
use Symfony\Component\HttpFoundation\Session\Session;
class AppExtension extends \Twig_Extension {
public function getGlobals() {
$session = new Session();
return array(
'session' => $session->all(),
);
}
public function getName() {
return 'app_extension';
}
}
Then add this in /app/config/services.yml:
services:
app.twig_extension:
class: AppBundle\Twig\AppExtension
public: false
tags:
- { name: twig.extension }
Then the session can be accessed from any view using:
{{ session.my_variable }}
You could build your form using FormBuilder as it let you more flexible way to configure form.
export class MyComp {
form: ControlGroup;
constructor(@Inject()fb: FormBuilder) {
this.form = fb.group({
foo: ['', MyValidators.regex(/^(?!\s|.*\s$).*$/)]
});
}
Then in your template :
<input type="text" ngControl="foo" />
<div *ngIf="!form.foo.valid">Please correct foo entry !</div>
You can also customize ng-invalid CSS class.
As there is actually no validators for regex, you have to write your own. It is a simple function that takes a control in input, and return null if valid or a StringMap if invalid.
export class MyValidators {
static regex(pattern: string): Function {
return (control: Control): {[key: string]: any} => {
return control.value.match(pattern) ? null : {pattern: true};
};
}
}
Hope that it help you.
As others have said, it is not possible to out of using post/redirect/get. But at the same time it is quite easy to do what you want to do server side.
In your POST page you simply validate the user input but do not act on it, instead you copy it into a SESSION array. You then redirect back to the main submission page again. Your main submission page starts by checking to see if the SESSION array that you are using exists, and if so copy it into a local array and unset it. From there you can act on it.
This way you only do all your main work once, achieving what you want to do.
I think it is linked with your RAM (or probably virtual memory) space and for the absolute maximum constrained to your OS version (e.g. 32 bit or 64 bit)
Using Java:
private WebDriver driver = new FirefoxDriver();
WebElement element = driver.findElement(By.id("<ElementID>"));//Enter ID for the element. You can use Name, xpath, cssSelector whatever you like
element.sendKeys(Keys.TAB);
element.sendKeys(Keys.ENTER);
Using C#:
private IWebDriver driver = new FirefoxDriver();
IWebElement element = driver.FindElement(By.Name("q"));
element.SendKeys(Keys.Tab);
element.SendKeys(Keys.Enter);
base but probably slow:
n <- 1
for(i in strsplit(as.character(before$type),'_and_')){
before[n, 'type_1'] <- i[[1]]
before[n, 'type_2'] <- i[[2]]
n <- n + 1
}
## attr type type_1 type_2
## 1 1 foo_and_bar foo bar
## 2 30 foo_and_bar_2 foo bar_2
## 3 4 foo_and_bar foo bar
## 4 6 foo_and_bar_2 foo bar_2
This works fine.
<?php
//date in mm/dd/yyyy format; or it can be in other formats as well
$birthDate = "12/17/1983";
//explode the date to get month, day and year
$birthDate = explode("/", $birthDate);
//get age from date or birthdate
$age = (date("md", date("U", mktime(0, 0, 0, $birthDate[0], $birthDate[1], $birthDate[2]))) > date("md")
? ((date("Y") - $birthDate[2]) - 1)
: (date("Y") - $birthDate[2]));
echo "Age is:" . $age;
?>
in appdelegate :
- (BOOL)application:(UIApplication *)application didFinishLaunchingWithOptions:(NSDictionary *)launchOptions
{
[[_window rootViewController]setModalPresentationStyle:UIModalPresentationCurrentContext];
return YES;
}
in you first view controller from where you have to load next view:
NextViewController *customvc = [[NextViewController alloc]init];
[self presentViewController:customvc animated:YES completion:^{
}];
in your nextViewController which is to be added transparent:
- (void)viewDidLoad
{
[super viewDidLoad];
self.view.backgroundColor = [UIColor clearColor];
UIView* backView = [[UIView alloc] initWithFrame:self.view.frame];
backView.backgroundColor = [[UIColor blackColor] colorWithAlphaComponent:0.6];
[self.view insertSubview:backView atIndex:0];
}
The below query will work perfect for both even or odd number of rows. In the subquery, we are finding the value(s) which has same number of rows before and after it. In case of odd rows the having clause will evaluate to 0 (same number of rows before and after cancels out the sign).
Similarly, for even rows the having clause evaluates to 1 for two rows (the center 2 rows) because they will (collectively) have same number of rows before and after.
In the outer query, we will avg out either the single value (in case of odd rows) or (2 values in case of even rows).
select avg(val) as median
from
(
select d1.val
from data d1 cross join data d2
group by d1.val
having abs(sum(sign(d1.val-d2.val))) in (0,1)
) sub
Note: In case your table has duplicate values, the above having clause should be changed to the below condition. In this case, there could be values outside of the original possibilities of 0,1. The below condition will make this condition dynamic and work in case of duplicates too.
having sum(case when d1.val=d2.val then 1 else 0 end)>=
abs(sum(sign(d1.val-d2.val)))
I had existing data in the first column and they were 0's. First I made the first column nullable. Then I set the data for the column to null. Then I set the column as an index. Then I made it a primary key with auto incrementing turned on. This is where I used another persons answer above:
ALTER TABLE `table_name` CHANGE COLUMN `colum_name` `colum_name` INT(11) NOT NULL AUTO_INCREMENT FIRST;
This Added numbers to all the rows of this table starting at one. If I ran the above code first it wasn't working because all the values were 0's. And making it an index was also required before making it auto incrementing. Next I made the column a primary key.
I ran into the same problem. One issue might be OpenCV is created for Python 2.7, not 3 (not all python 2.7 libraries will work in python 3 or greater). I also don't believe you can download OpenCV directly through PyCharm's package installer. I have found luck following the instructions: OpenCV Python. Specifically:
import cv2
, and assuming no errors print cv2.__version__
Alternatively, I have had luck using this package opencv-python, which you can straightforwardly install using pip with pip install opencv-python
Good luck!
you can use like this:
string Log_In_Val = (Convert.ToString(attenObj.Log_In) == "" ? "Null" + "," : "'" + Convert.ToString(attenObj.Log_In) + "',");
Try the following command and it should work out for you.
sed "s/\s/,/g" orignalFive.csv > editedFinal.csv
How about another, simpler approach:
require 'fileutils'
FileUtils.cmp(file1, file2)
I had an issue with Page.ClientScript.RegisterStartUpScript - I wasn't using an update panel, but the control was cached. This meant that I had to insert the script into a Literal (or could use a PlaceHolder) so when rendered from the cache the script is included.
A similar solution might work for you.
You should set the option:
local-infile=1
into your [mysql] entry of my.cnf file or call mysql client with the --local-infile option:
mysql --local-infile -uroot -pyourpwd yourdbname
You have to be sure that the same parameter is defined into your [mysqld] section too to enable the "local infile" feature server side.
It's a security restriction.
LOAD DATA LOCAL INFILE '/softwares/data/data.csv' INTO TABLE tableName;
string displayValue="03:00 AM";
This is a point in time , not a duration (TimeSpan).
So something is wrong with your basic design or assumptions.
If you do want to use it, you'll have to convert it to a DateTime (point in time) first. You can format a DateTime without the date part, that would be your desired string.
TimeSpan t1 = ...;
DateTime d1 = DateTime.Today + t1; // any date will do
string result = d1.ToString("hh:mm:ss tt");
storeTime variable can have value like
storeTime=16:00:00;
No, it can have a value of 4 o'clock but the representation is binary, a TimeSpan cannot record the difference between 16:00
and 4 pm
.
Another way using template reference variable and ViewChild, as proposed by Frelseren:
import { ViewChild } from '@angular/core';
@Component({
selector: 'my-app',
template: `
<div>
<input type="file" #fileInput/>
</div>
`
})
export class AppComponent {
@ViewChild("fileInput") fileInputVariable: any;
randomMethod() {
const files = this.fileInputVariable.nativeElement.files;
console.log(files);
}
}
The fundamental difference between include
and import
is that you must use import
to refer to declarations or definitions that are in a different target namespace and you must use include
to refer to declarations or definitions that are (or will be) in the same target namespace.
Source: https://web.archive.org/web/20070804031046/http://xsd.stylusstudio.com/2002Jun/post08016.htm
jQuery's id
selector only returns one result. The descendant
and multiple
selectors in the second and third statements are designed to select multiple elements. It's similar to:
Statement 1
var length = document.getElementById('a').length;
...Yields one result.
Statement 2
var length = 0;
for (i=0; i<document.body.childNodes.length; i++) {
if (document.body.childNodes.item(i).id == 'a') {
length++;
}
}
...Yields two results.
Statement 3
var length = document.getElementById('a').length + document.getElementsByTagName('div').length;
...Also yields two results.
First activity:
String food = (String)((Spinner)findViewById(R.id.food)).getSelectedItem();
RadioButton rb = (RadioButton) findViewById(R.id.rb);
Intent i = new Intent(this,secondActivity.class);
i.putExtra("food",food);
i.putExtra("rb",rb.isChecked());
Second activity:
String food = getIntent().getExtras().getString("food");
Boolean rb = getIntent().getExtras().getBoolean("rb");
The language specification says on p.64f
A construct of the form < T > ( ... ) => { ... } could be parsed as an arrow function expression with a type parameter or a type assertion applied to an arrow function with no type parameter. It is resolved as the former[..]
example:
// helper function needed because Backbone-couchdb's sync does not return a jqxhr
let fetched = <
R extends Backbone.Collection<any> >(c:R) => {
return new Promise(function (fulfill, reject) {
c.fetch({reset: true, success: fulfill, error: reject})
});
};
For me, it was because I was trying to pull a branch which was already deleted from Github.
Sorry to dig up an old question but in case someone stumbles onto this thread and wants a quicker solution.
Bulk inserting a unknown width file with \n row terminators into a temp table that is created outside of the EXEC statement.
DECLARE @SQL VARCHAR(8000)
IF OBJECT_ID('TempDB..#BulkInsert') IS NOT NULL
BEGIN
DROP TABLE #BulkInsert
END
CREATE TABLE #BulkInsert
(
Line VARCHAR(MAX)
)
SET @SQL = 'BULK INSERT #BulkInser FROM ''##FILEPATH##'' WITH (ROWTERMINATOR = ''\n'')'
EXEC (@SQL)
SELECT * FROM #BulkInsert
Further support that dynamic SQL within an EXEC statement has access to temp tables outside of the EXEC statement. http://sqlfiddle.com/#!3/d41d8/19343
DECLARE @SQL VARCHAR(8000)
IF OBJECT_ID('TempDB..#BulkInsert') IS NOT NULL
BEGIN
DROP TABLE #BulkInsert
END
CREATE TABLE #BulkInsert
(
Line VARCHAR(MAX)
)
INSERT INTO #BulkInsert
(
Line
)
SELECT 1
UNION SELECT 2
UNION SELECT 3
SET @SQL = 'SELECT * FROM #BulkInsert'
EXEC (@SQL)
Further support, written for MSSQL2000 http://technet.microsoft.com/en-us/library/aa175921(v=sql.80).aspx
Example at the bottom of the link
DECLARE @cmd VARCHAR(1000), @ExecError INT
CREATE TABLE #ErrFile (ExecError INT)
SET @cmd = 'EXEC GetTableCount ' +
'''pubs.dbo.authors''' +
'INSERT #ErrFile VALUES(@@ERROR)'
EXEC(@cmd)
SET @ExecError = (SELECT * FROM #ErrFile)
SELECT @ExecError AS '@@ERROR'
There is great way of executing SQL scripts from Java without reading them yourself as long as you don't mind having a dependency on Ant. In my opinion such a dependency is very well justified in your case. Here is sample code, where SQLExec class lives in ant.jar:
private void executeSql(String sqlFilePath) {
final class SqlExecuter extends SQLExec {
public SqlExecuter() {
Project project = new Project();
project.init();
setProject(project);
setTaskType("sql");
setTaskName("sql");
}
}
SqlExecuter executer = new SqlExecuter();
executer.setSrc(new File(sqlFilePath));
executer.setDriver(args.getDriver());
executer.setPassword(args.getPwd());
executer.setUserid(args.getUser());
executer.setUrl(args.getUrl());
executer.execute();
}
"Casting" is different than conversion. In this case, window.location.hash
will auto-convert a number to a string. But to avoid a TypeScript compile error, you can do the string conversion yourself:
window.location.hash = ""+page_number;
window.location.hash = String(page_number);
These conversions are ideal if you don't want an error to be thrown when page_number
is null
or undefined
. Whereas page_number.toString()
and page_number.toLocaleString()
will throw when page_number
is null
or undefined
.
When you only need to cast, not convert, this is how to cast to a string in TypeScript:
window.location.hash = <string>page_number;
// or
window.location.hash = page_number as string;
The <string>
or as string
cast annotations tell the TypeScript compiler to treat page_number
as a string at compile time; it doesn't convert at run time.
However, the compiler will complain that you can't assign a number to a string. You would have to first cast to <any>
, then to <string>
:
window.location.hash = <string><any>page_number;
// or
window.location.hash = page_number as any as string;
So it's easier to just convert, which handles the type at run time and compile time:
window.location.hash = String(page_number);
(Thanks to @RuslanPolutsygan for catching the string-number casting issue.)
Starting with Go 1.16, use os.ReadFile
to load the file to memory, use os.WriteFile
to write to a file from memory.
Be careful with the os.ReadFile
because it reads the whole file into memory.
package main
import "os"
func main() {
b, err := os.ReadFile("input.txt")
if err != nil {
log.Fatal(err)
}
// `data` contains everything your file does
// This writes it to the Standard Out
os.Stdout.Write(data)
// You can also write it to a file as a whole
err = os.WriteFile("destination.txt", b, 0644)
if err != nil {
log.Fatal(err)
}
}
You can do this in XAML easily enough:
<TextBlock>
Hello <Bold>my</Bold> faithful <Underline>computer</Underline>.<Italic>You rock!</Italic>
</TextBlock>
This may be prove helpful to few people -
// MARK: - KVO
var observedPaths: [String] = []
func observeKVO(keyPath: String) {
observedPaths.append(keyPath)
addObserver(self, forKeyPath: keyPath, options: [.old, .new], context: nil)
}
func unObserveKVO(keyPath: String) {
if let index = observedPaths.index(of: keyPath) {
observedPaths.remove(at: index)
}
removeObserver(self, forKeyPath: keyPath)
}
func unObserveAllKVO() {
for keyPath in observedPaths {
removeObserver(self, forKeyPath: keyPath)
}
}
override func observeValue(forKeyPath keyPath: String?, of object: Any?, change: [NSKeyValueChangeKey : Any]?, context: UnsafeMutableRawPointer?) {
if let keyPath = keyPath {
switch keyPath {
case #keyPath(camera.iso):
slider.value = camera.iso
default:
break
}
}
}
I had used KVO in this way in Swift 3. You can use this code with few changes.
If your compiler supports (at least part of) C++11 you could do something like:
for (auto& t : myMap)
std::cout << t.first << " "
<< t.second.first << " "
<< t.second.second << "\n";
For C++03 I'd use std::copy
with an insertion operator instead:
typedef std::pair<string, std::pair<string, string> > T;
std::ostream &operator<<(std::ostream &os, T const &t) {
return os << t.first << " " << t.second.first << " " << t.second.second;
}
// ...
std:copy(myMap.begin(), myMap.end(), std::ostream_iterator<T>(std::cout, "\n"));
I was having "(...) unable to handle this request. http error 500" and found out it was from a require_once that was working locally, on a windows machine, with backslash (\) as separator for directories but when i uploaded to my server it stopped working. I changed it to forward slash (/) and now is ok.
require_once ( 'cards\cards.php' ); // **http error 500**
require_once ( 'cards/cards.php' ); // OK
mysqlclient is a fork of MySQLdb and can serve as a drop-in replacement with Python 3.4 support. If you have trouble building it on Windows, you can download it from Christoph Gohlke's Unofficial Windows Binaries for Python Extension Packages
Functions mysql_
are not supported any longer and have been removed in PHP 7
. You must use mysqli_
instead. However it's not recommended method now. You should consider PDO
with better security solutions.
$result = mysqli_query($con, "SELECT option_value FROM wp_10_options WHERE option_name='homepage' LIMIT 1");
$row = mysqli_fetch_assoc($result);
echo $row['option_value'];
Addendum to @sjngm's answer:
They both also ignore whitespace:
var foo = " 3 "; console.log(parseInt(foo)); // 3 console.log(Number(foo)); // 3
It is not exactly correct. As sjngm wrote parseInt parses string to first number. It is true. But the problem is when you want to parse number separated with whitespace ie. "12 345". In that case parseInt("12 345")
will return 12
instead of 12345
.
So to avoid that situation you must trim whitespaces before parsing to number.
My solution would be:
var number=parseInt("12 345".replace(/\s+/g, ''),10);
Notice one extra thing I used in parseInt() function. parseInt("string",10)
will set the number to decimal format. If you would parse string like "08" you would get 0 because 8 is not a octal number.Explanation is here
Ctrl-w followed by H, J, K or L (capital) will move the current window to the far left
, bottom
, top
or right
respectively like normal cursor navigation.
The lower case equivalents move focus instead of moving the window.
SSIS Integration with Visual Studio 2017 available from Aug 2017.
SSIS designer is now available for Visual Studio 2017! ARCHIVE
I installed in July 2018 and appears working fine. See Download link
Java versions before version 7 allow for these three combinations of try-catch-finally...
try - catch
try - catch - finally
try - finally
finally
block will be always executed no matter of what's going on in the try
or/and catch
block. so if there is no catch
block, the exception won't be handled here.
However, you will still need an exception handler somewhere in your code - unless you want your application to crash completely of course. It depends on the architecture of your application exactly where that handler is.
- Java try block must be followed by either catch or finally block.
- For each try block there can be zero or more catch blocks, but only one finally block.
- The finally block will not be executed if program exits(either by calling System.exit() or by causing a fatal error that causes the process to abort).
You can do it without explicit loops by using stream iterators. I'm sure that it uses some kind of loop internally.
#include <string>
#include <iostream>
#include <istream>
#include <ostream>
#include <iterator>
int main()
{
// don't skip the whitespace while reading
std::cin >> std::noskipws;
// use stream iterators to copy the stream to a string
std::istream_iterator<char> it(std::cin);
std::istream_iterator<char> end;
std::string results(it, end);
std::cout << results;
}
I'm going to give you an example of how I read REST headers for my controllers. My controllers only accept application/json as a request type if I have data that needs to be read. I suspect that your problem is that you have an application/octet-stream that Spring doesn't know how to handle.
Normally my controllers look like this:
@Controller
public class FooController {
@Autowired
private DataService dataService;
@RequestMapping(value="/foo/", method = RequestMethod.GET)
@ResponseBody
public ResponseEntity<Data> getData(@RequestHeader String dataId){
return ResponseEntity.newInstance(dataService.getData(dataId);
}
Now there is a lot of code doing stuff in the background here so I will break it down for you.
ResponseEntity is a custom object that every controller returns. It contains a static factory allowing the creation of new instances. My Data Service is a standard service class.
The magic happens behind the scenes, because you are working with JSON, you need to tell Spring to use Jackson to map HttpRequest objects so that it knows what you are dealing with.
You do this by specifying this inside your <mvc:annotation-driven>
block of your config
<mvc:annotation-driven>
<mvc:message-converters>
<bean class="org.springframework.http.converter.json.MappingJackson2HttpMessageConverter">
<property name="objectMapper" ref="objectMapper" />
</bean>
</mvc:message-converters>
</mvc:annotation-driven>
ObjectMapper is simply an extension of com.fasterxml.jackson.databind.ObjectMapper
and is what Jackson uses to actually map your request from JSON into an object.
I suspect you are getting your exception because you haven't specified a mapper that can read an Octet-Stream into an object, or something that Spring can handle. If you are trying to do a file upload, that is something else entirely.
So my request that gets sent to my controller looks something like this simply has an extra header called dataId
.
If you wanted to change that to a request parameter and use @RequestParam String dataId
to read the ID out of the request your request would look similar to this:
contactId : {"fooId"}
This request parameter can be as complex as you like. You can serialize an entire object into JSON, send it as a request parameter and Spring will serialize it (using Jackson) back into a Java Object ready for you to use.
Example In Controller:
@RequestMapping(value = "/penguin Details/", method = RequestMethod.GET)
@ResponseBody
public DataProcessingResponseDTO<Pengin> getPenguinDetailsFromList(
@RequestParam DataProcessingRequestDTO jsonPenguinRequestDTO)
Request Sent:
jsonPengiunRequestDTO: {
"draw": 1,
"columns": [
{
"data": {
"_": "toAddress",
"header": "toAddress"
},
"name": "toAddress",
"searchable": true,
"orderable": true,
"search": {
"value": "",
"regex": false
}
},
{
"data": {
"_": "fromAddress",
"header": "fromAddress"
},
"name": "fromAddress",
"searchable": true,
"orderable": true,
"search": {
"value": "",
"regex": false
}
},
{
"data": {
"_": "customerCampaignId",
"header": "customerCampaignId"
},
"name": "customerCampaignId",
"searchable": true,
"orderable": true,
"search": {
"value": "",
"regex": false
}
},
{
"data": {
"_": "penguinId",
"header": "penguinId"
},
"name": "penguinId",
"searchable": false,
"orderable": true,
"search": {
"value": "",
"regex": false
}
},
{
"data": {
"_": "validpenguin",
"header": "validpenguin"
},
"name": "validpenguin",
"searchable": true,
"orderable": true,
"search": {
"value": "",
"regex": false
}
},
{
"data": {
"_": "",
"header": ""
},
"name": "",
"searchable": false,
"orderable": false,
"search": {
"value": "",
"regex": false
}
}
],
"order": [
{
"column": 0,
"dir": "asc"
}
],
"start": 0,
"length": 10,
"search": {
"value": "",
"regex": false
},
"objectId": "30"
}
which gets automatically serialized back into an DataProcessingRequestDTO object before being given to the controller ready for me to use.
As you can see, this is quite powerful allowing you to serialize your data from JSON to an object without having to write a single line of code. You can do this for @RequestParam
and @RequestBody
which allows you to access JSON inside your parameters or request body respectively.
Now that you have a concrete example to go off, you shouldn't have any problems once you change your request type to application/json
.
I was facing same issue not able to post form without ajax. but found solution , hope it can help and someones time.
<form name="paymentitrform" id="paymentitrform" class="payment"
method="post"
action="abc.php">
<input name="email" value="" placeholder="email" />
<input type="hidden" name="planamount" id="planamount" value="0">
<input type="submit" onclick="form_submit() " value="Continue Payment" class="action"
name="planform">
</form>
You can submit post form, from bootstrap modal using below javascript/jquery code : call the below function onclick of input submit button
function form_submit() {
document.getElementById("paymentitrform").submit();
}
for Google Maps v3, you need to trigger the resize event differently:
google.maps.event.trigger(map, "resize");
See the documentation for the resize event (you'll need to search for the word 'resize'): http://code.google.com/apis/maps/documentation/v3/reference.html#event
Update
This answer has been here a long time, so a little demo might be worthwhile & although it uses jQuery, there's no real need to do so.
$(function() {
var mapOptions = {
zoom: 8,
center: new google.maps.LatLng(-34.397, 150.644)
};
var map = new google.maps.Map($("#map-canvas")[0], mapOptions);
// listen for the window resize event & trigger Google Maps to update too
$(window).resize(function() {
// (the 'map' here is the result of the created 'var map = ...' above)
google.maps.event.trigger(map, "resize");
});
});
_x000D_
html,
body {
height: 100%;
}
#map-canvas {
min-width: 200px;
width: 50%;
min-height: 200px;
height: 80%;
border: 1px solid blue;
}
_x000D_
<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>
<script src="https://maps.googleapis.com/maps/api/js?v=3.exp&dummy=.js"></script>
Google Maps resize demo
<div id="map-canvas"></div>
_x000D_
UPDATE 2018-05-22
With a new renderer release in version 3.32 of Maps JavaScript API the resize event is no longer a part of Map
class.
The documentation states
When the map is resized, the map center is fixed
The full-screen control now preserves center.
There is no longer any need to trigger the resize event manually.
source: https://developers.google.com/maps/documentation/javascript/new-renderer
google.maps.event.trigger(map, "resize");
doesn't have any effect starting from version 3.32
string Output = Regex.Replace(Input, @"([ a-zA-Z0-9&, _]|^\s)", "");
Here all the special characters except space, comma, and ampersand are replaced. You can also omit space, comma and ampersand by the following regular expression.
string Output = Regex.Replace(Input, @"([ a-zA-Z0-9_]|^\s)", "");
Where Input is the string which we need to replace the characters.
For an uglier version of unshift
use splice
:
TheArray.splice(0, 0, TheNewObject);
Well, here is my "answer". It uses the fact that String.Split can be told hold many items it should split to (which I found lacking in the other answers):
string theString = "Some Very Large String Here";
var array = theString.Split(new [] { ' ' }, 2); // return at most 2 parts
// note: be sure to check it's not an empty array
string firstElem = array[0];
// note: be sure to check length first
string restOfArray = array[1];
This is very similar to the Substring
method, just by a different means.
You need to do a while loop to get the result from the SQL query, like this:
require_once('db.php');
$sql="SELECT * FROM modul1open WHERE idM1O>=(SELECT FLOOR( MAX( idM1O ) * RAND( ) )
FROM modul1open) ORDER BY idM1O LIMIT 1";
$result = mysql_query($sql);
while($row = mysql_fetch_array($result, MYSQL_ASSOC)) {
// If you want to display all results from the query at once:
print_r($row);
// If you want to display the results one by one
echo $row['column1'];
echo $row['column2']; // etc..
}
Also I would strongly recommend not using mysql_* since it's deprecated. Instead use the mysqli
or PDO
extension. You can read more about that here.
Unfortunately in HTML 5 the 'pattern' attribute is linked to only 4-5 attributes. However if you are willing to use a "text" field instead and convert to number later, this might help you;
This limits an input from 1 character (numberic) to 3.
<input name=quantity type=text pattern='[0-9]{1,3}'>
The CSS basically allows for confirmation with an "Thumbs up" or "Down".
docker-compose down --rmi all
and then restart your computer
class Foo (object):
# ^class name #^ inherits from object
bar = "Bar" #Class attribute.
def __init__(self):
# #^ The first variable is the class instance in methods.
# # This is called "self" by convention, but could be any name you want.
#^ double underscore (dunder) methods are usually special. This one
# gets called immediately after a new instance is created.
self.variable = "Foo" #instance attribute.
print self.variable, self.bar #<---self.bar references class attribute
self.bar = " Bar is now Baz" #<---self.bar is now an instance attribute
print self.variable, self.bar
def method(self, arg1, arg2):
#This method has arguments. You would call it like this: instance.method(1, 2)
print "in method (args):", arg1, arg2
print "in method (attributes):", self.variable, self.bar
a = Foo() # this calls __init__ (indirectly), output:
# Foo bar
# Foo Bar is now Baz
print a.variable # Foo
a.variable = "bar"
a.method(1, 2) # output:
# in method (args): 1 2
# in method (attributes): bar Bar is now Baz
Foo.method(a, 1, 2) #<--- Same as a.method(1, 2). This makes it a little more explicit what the argument "self" actually is.
class Bar(object):
def __init__(self, arg):
self.arg = arg
self.Foo = Foo()
b = Bar(a)
b.arg.variable = "something"
print a.variable # something
print b.Foo.variable # Foo
I had the same issue when converting databases from Access to MySQL (using vb.net to communicate with the database).
I needed to assess if a field (field type varchar(1)) was null.
This statement worked for my scenario:
SELECT * FROM [table name] WHERE [field name] = ''
$('.parent-div').children(':first').before("<div class='child-div'>some text</div>");
You can do it in a better way (up to 50 % faster than modulo operator):
odd: x & 1 even: !(x & 1)
Reference: High Performance JavaScript, 8. ->Bitwise Operators
Try putting a +
before R.xyz
. That should start showing additional folders, e.g.:
+ R.raw.beep.mp3
Delete Temp files by run > %temp%
And Open VS2015 by run as admin,
it works for me.
You need to find reference of existing Fragment and remove that fragment using below code. You need add/commit fragment using one tag ex. "TAG_FRAGMENT".
Fragment fragment = getSupportFragmentManager().findFragmentByTag(TAG_FRAGMENT);
if(fragment != null)
getSupportFragmentManager().beginTransaction().remove(fragment).commit();
That is it.
Try to edit your my.cf and comment the original sql_mode and add sql_mode = "".
vi /etc/mysql/my.cnf
sql_mode = ""
save and quit...
service mysql restart
YES? Have a look a meteor. Links:
http://meteor.com/screencast and http://net.tutsplus.com/tutorials/javascript-ajax/whats-this-meteor-thing/
I don't understand how it is done. But Nettuts+ put this thing in the javascript-ajax section, maybe magic happens.
It also shows some way to connect and insert to MongoDB with JS, like this:
Products.insert({Name : "Hammer", Price : 4.50, InStock : true});
Products.insert({Name : "Wrench", Price : 2.70, InStock : true});
Products.insert({Name : "Screw Driver", Price : 3.00, InStock : false});
Products.insert({Name : "Drill", Price : 5.25, InStock : true});
To use vertical-align
properly, you should do it on table
tag. But there is a way to make other html tags to behave as a table by assigning them a css of display:table
to your parent, and display:table-cell
on your child. Then vertical-align:bottom
will work on that child.
HTML:
??????<div class="parent">
<div class="child">
This text is vertically aligned to bottom.
</div>
</div>????????????????????????
CSS:
?.parent {
width: 300px;
height: 50px;
display:? table;
border: 1px solid red;
}
.child {
display: table-cell;
vertical-align: bottom;
}?
Here is a live example: link demo
I have a small utility function to convert all possible values into Boolean.
private boolean convertToBoolean(String value) {
boolean returnValue = false;
if ("1".equalsIgnoreCase(value) || "yes".equalsIgnoreCase(value) ||
"true".equalsIgnoreCase(value) || "on".equalsIgnoreCase(value))
returnValue = true;
return returnValue;
}
Adding images to the drawable folder is pretty simple. Just follow these steps:
Your image will be saved inside drawable and you can use it.
select * from my_table where my_field Like '[a-z][a-z]%'
From the post above, I think the best way is
width: 100%
margin-left: auto
and margin-right: auto
, or for table make it align="center"
.Hope this will help.
svn revert will undo any local changes you've made
You may find this fast snippet useful in not so much long time intervals:
from datetime import datetime as dttm
time_ago = dttm(2017, 3, 1, 1, 1, 1, 1348)
delta = dttm.now() - time_ago
days = delta.days # can be converted into years which complicates a bit…
hours, minutes, seconds = map(int, delta.__format__('').split('.')[0].split(' ')[-1].split(':'))
tested on Python v.3.8.6
There is a optimized code for case when function needs to equals to empty arrays (and returning false in that case)
const objectsEqual = (o1, o2) => {
if (o2 === null && o1 !== null) return false;
return o1 !== null && typeof o1 === 'object' && Object.keys(o1).length > 0 ?
Object.keys(o1).length === Object.keys(o2).length &&
Object.keys(o1).every(p => objectsEqual(o1[p], o2[p]))
: (o1 !== null && Array.isArray(o1) && Array.isArray(o2) && !o1.length &&
!o2.length) ? true : o1 === o2;
}
You simply need to use semilogy instead of plot:
from pylab import *
import matplotlib.pyplot as pyplot
a = [ pow(10,i) for i in range(10) ]
fig = pyplot.figure()
ax = fig.add_subplot(2,1,1)
line, = ax.semilogy(a, color='blue', lw=2)
show()
Or use the FileInfo as suggested in In C# check that filename is possibly valid (not that it exists).
I was trying to set the log_statement
in some postgres config file but in fact the file was not read by our postgres.
I confirmed that using the request :
select *
from pg_settings
[...]
log_statement none # That was not the value i was expected for !!!
I use this way https://stackoverflow.com/a/41912295/2294168
command: postgres -c config_file=/etc/postgresql.conf
if x
is a vector with raw scores then scale(x)
is a vector with standardized scores.
Or manually: (x-mean(x))/sd(x)
I would say angular.copy(source);
in your situation is unnecessary if later on you do not use is it without a destination angular.copy(source, [destination]);
.
If a destination is provided, all of its elements (for arrays) or properties (for objects) are deleted and then all elements/properties from the source are copied to it.
according jdk source code from javasourcecode.org, HashSet use HashMap as its inside implementation, the code about put method of HashSet is below :
public V put(K key, V value) {
if (key == null)
return putForNullKey(value);
int hash = hash(key.hashCode());
int i = indexFor(hash, table.length);
for (Entry<K,V> e = table[i]; e != null; e = e.next) {
Object k;
if (e.hash == hash && ((k = e.key) == key || key.equals(k))) {
V oldValue = e.value;
e.value = value;
e.recordAccess(this);
return oldValue;
}
}
modCount++;
addEntry(hash, key, value, i);
return null;
}
The rule is firstly check the hash, then check the reference and then call equals method of the object will be putted in.
I think you are looking for this function:
http://doc.qt.io/qt-5/qdatetime.html#toTime_t
uint QDateTime::toTime_t () const
Returns the datetime as the number of seconds that have passed since 1970-01-01T00:00:00, > Coordinated Universal Time (Qt::UTC).
On systems that do not support time zones, this function will behave as if local time were Qt::UTC.
See also setTime_t().
We can use both std::advance as well as std::next, but there's a difference between the two.
advance
modifies its argument and returns nothing. So it can be used as:
vector<int> v;
v.push_back(1);
v.push_back(2);
auto itr = v.begin();
advance(itr, 1); //modifies the itr
cout << *itr<<endl //prints 2
next
returns a modified copy of the iterator:
vector<int> v;
v.push_back(1);
v.push_back(2);
cout << *next(v.begin(), 1) << endl; //prints 2
It is standard matplotlib.pyplot:
...
import matplotlib.pyplot as plt
plt.ylim(10, 40)
Or simpler, as mwaskom comments below:
ax.set(ylim=(10, 40))
I finally found this link:
https://blogs.perficient.com/microsoft/2011/06/powershell-count-property-returns-nothing/
Well, it turns out that this is a quirk caused precisely because there was only one file in the directory. Some searching revealed that in this case, PowerShell returns a scalar object instead of an array. This object doesn’t have a count property, so there isn’t anything to retrieve.
The solution -- force PowerShell to return an array with the @
symbol:
Write-Host @( Get-ChildItem c:\MyFolder ).Count;
Step 1: Here is one simple example. You have to create a SQL file from the dump file using SQLFILE
option.
Step 2: Grep for CREATE USER
in the generated SQL file (here tables.sql)
Example here:
$ impdp directory=exp_dir dumpfile=exp_user1_all_tab.dmp logfile=imp_exp_user1_tab sqlfile=tables.sql
Import: Release 11.2.0.3.0 - Production on Fri Apr 26 08:29:06 2013
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
Username: / as sysdba
Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA Job "SYS"."SYS_SQL_FILE_FULL_01" successfully completed at 08:29:12
$ grep "CREATE USER" tables.sql
CREATE USER "USER1" IDENTIFIED BY VALUES 'S:270D559F9B97C05EA50F78507CD6EAC6AD63969E5E;BBE7786A5F9103'
Lot of datapump options explained here http://www.acehints.com/p/site-map.html
(UPDATED with examples for Bootstrap v4, v3 and v3)
Examples of forms with validation classes for the past few major versions of Bootstrap.
Bootstrap v4
See the live version on codepen
<div class="container">
<form>
<div class="form-group row">
<label for="inputEmail" class="col-sm-2 col-form-label text-success">Email</label>
<div class="col-sm-7">
<input type="email" class="form-control is-valid" id="inputEmail" placeholder="Email">
</div>
</div>
<div class="form-group row">
<label for="inputPassword" class="col-sm-2 col-form-label text-danger">Password</label>
<div class="col-sm-7">
<input type="password" class="form-control is-invalid" id="inputPassword" placeholder="Password">
</div>
<div class="col-sm-3">
<small id="passwordHelp" class="text-danger">
Must be 8-20 characters long.
</small>
</div>
</div>
</form>
</div>
Bootstrap v3
See the live version on codepen
<form role="form">
<div class="form-group has-warning">
<label class="control-label" for="inputWarning">Input with warning</label>
<input type="text" class="form-control" id="inputWarning">
<span class="help-block">Something may have gone wrong</span>
</div>
<div class="form-group has-error">
<label class="control-label" for="inputError">Input with error</label>
<input type="text" class="form-control" id="inputError">
<span class="help-block">Please correct the error</span>
</div>
<div class="form-group has-info">
<label class="control-label" for="inputError">Input with info</label>
<input type="text" class="form-control" id="inputError">
<span class="help-block">Username is taken</span>
</div>
<div class="form-group has-success">
<label class="control-label" for="inputSuccess">Input with success</label>
<input type="text" class="form-control" id="inputSuccess" />
<span class="help-block">Woohoo!</span>
</div>
</form>
Bootstrap v2
See the live version on jsfiddle
The .error
, .success
, .warning
and .info
classes are appended to the .control-group
. This is standard Bootstrap markup and styling in v2. Just follow that and you're in good shape. Of course you can go beyond with your own styles to add a popup or "inline flash" if you prefer, but if you follow Bootstrap convention and hang those validation classes on the .control-group
it will stay consistent and easy to manage (at least since you'll continue to have the benefit of Bootstrap docs and examples)
<form class="form-horizontal">
<div class="control-group warning">
<label class="control-label" for="inputWarning">Input with warning</label>
<div class="controls">
<input type="text" id="inputWarning">
<span class="help-inline">Something may have gone wrong</span>
</div>
</div>
<div class="control-group error">
<label class="control-label" for="inputError">Input with error</label>
<div class="controls">
<input type="text" id="inputError">
<span class="help-inline">Please correct the error</span>
</div>
</div>
<div class="control-group info">
<label class="control-label" for="inputInfo">Input with info</label>
<div class="controls">
<input type="text" id="inputInfo">
<span class="help-inline">Username is taken</span>
</div>
</div>
<div class="control-group success">
<label class="control-label" for="inputSuccess">Input with success</label>
<div class="controls">
<input type="text" id="inputSuccess">
<span class="help-inline">Woohoo!</span>
</div>
</div>
</form>
1. Open a terminal and login to mysql like this:
el@apollo:~$ mysql -u root -p
Enter password:
Welcome to the MySQL monitor. Commands end with ; or \g.
mysql>
2. Take a look to see if you have any procedures:
mysql> show procedure status;
+-----------+---------------+-----------+---------+---------------------+---------------------+---------------+---------+----------------------+----------------------+--------------------+
| Db | Name | Type | Definer | Modified | Created | Security_type | Comment | character_set_client | collation_connection | Database Collation |
+-----------+---------------+-----------+---------+---------------------+---------------------+---------------+---------+----------------------+----------------------+--------------------+
| yourdb | sp_user_login | PROCEDURE | root@% | 2013-12-06 14:10:25 | 2013-12-06 14:10:25 | DEFINER | | utf8 | utf8_general_ci | latin1_swedish_ci |
+-----------+---------------+-----------+---------+---------------------+---------------------+---------------+---------+----------------------+----------------------+--------------------+
1 row in set (0.01 sec)
I have one defined, you probably have none to start out.
3. Change to the database, delete it.
mysql> use yourdb;
Database changed
mysql> drop procedure if exists sp_user_login;
Query OK, 0 rows affected (0.01 sec)
mysql> show procedure status;
Empty set (0.00 sec)
4. Ok so now I have no stored procedures defined. Make the simplest one:
mysql> delimiter //
mysql> create procedure foobar()
-> begin select 'hello'; end//
Query OK, 0 rows affected (0.00 sec)
The // will communicate to the terminal when you are done entering commands for the stored procedure. the stored procedure name is foobar. it takes no parameters and should return "hello".
5. See if it's there, remember to set back your delimiter!:
mysql> show procedure status;
->
->
Gotcha! Why didn't this work? You set the delimiter to //
remember? Set it back to ;
6. Set the delimiter back and look at the procedure:
mysql> delimiter ;
mysql> show procedure status;
+-----------+--------+-----------+----------------+---------------------+---------------------+---------------+---------+----------------------+----------------------+--------------------+
| Db | Name | Type | Definer | Modified | Created | Security_type | Comment | character_set_client | collation_connection | Database Collation |
+-----------+--------+-----------+----------------+---------------------+---------------------+---------------+---------+----------------------+----------------------+--------------------+
| yourdb | foobar | PROCEDURE | root@localhost | 2013-12-06 14:27:23 | 2013-12-06 14:27:23 | DEFINER | | utf8 | utf8_general_ci | latin1_swedish_ci |
+-----------+--------+-----------+----------------+---------------------+---------------------+---------------+---------+----------------------+----------------------+--------------------+
1 row in set (0.00 sec)
7. Run it:
mysql> call foobar();
+-------+
| hello |
+-------+
| hello |
+-------+
1 row in set (0.00 sec)
Query OK, 0 rows affected (0.00 sec)
Hello world complete, lets overwrite it with something better.
8. Drop foobar, redefine it to accept a parameter, and re run it:
mysql> drop procedure foobar;
Query OK, 0 rows affected (0.00 sec)
mysql> show procedure status;
Empty set (0.00 sec)
mysql> delimiter //
mysql> create procedure foobar (in var1 int)
-> begin select var1 + 2 as result;
-> end//
Query OK, 0 rows affected (0.00 sec)
mysql> delimiter ;
mysql> call foobar(5);
+--------+
| result |
+--------+
| 7 |
+--------+
1 row in set (0.00 sec)
Query OK, 0 rows affected (0.00 sec)
Nice! We made a procedure that takes input, modifies it, and does output. Now lets do an out variable.
9. Remove foobar, Make an out variable, run it:
mysql> delimiter ;
mysql> drop procedure foobar;
Query OK, 0 rows affected (0.00 sec)
mysql> delimiter //
mysql> create procedure foobar(out var1 varchar(100))
-> begin set var1="kowalski, what's the status of the nuclear reactor?";
-> end//
Query OK, 0 rows affected (0.00 sec)
mysql> delimiter ;
mysql> call foobar(@kowalski_status);
Query OK, 0 rows affected (0.00 sec)
mysql> select @kowalski_status;
+-----------------------------------------------------+
| @kowalski_status |
+-----------------------------------------------------+
| kowalski, what's the status of the nuclear reactor? |
+-----------------------------------------------------+
1 row in set (0.00 sec)
10. Example of INOUT usage in MySQL:
mysql> select 'ricksays' into @msg;
Query OK, 1 row affected (0.00 sec)
mysql> delimiter //
mysql> create procedure foobar (inout msg varchar(100))
-> begin
-> set msg = concat(@msg, " never gonna let you down");
-> end//
mysql> delimiter ;
mysql> call foobar(@msg);
Query OK, 0 rows affected (0.00 sec)
mysql> select @msg;
+-----------------------------------+
| @msg |
+-----------------------------------+
| ricksays never gonna let you down |
+-----------------------------------+
1 row in set (0.00 sec)
Ok it worked, it joined the strings together. So you defined a variable msg, passed in that variable into stored procedure called foobar, and @msg was written to by foobar.
Now you know how to make stored procedures with delimiters. Continue this tutorial here, start in on variables within stored procedures: http://net.tutsplus.com/tutorials/an-introduction-to-stored-procedures/
public class FirstJavaProgram {
public static void main(String[] args)
{
int a[]={1,2,3,45,6,6};
// Method 1: this is simple way to print array
for(int i=0;i<a.length;i++)
{
System.out.print(a[i]+" ");
}
// Method 2: Enhanced For loop
for(int i:a)
{
System.out.print(i+" ");
}
}
}
You have to replace string line
QString line = in.readLine();
into while:
QFile file("/home/hamad/lesson11.txt");
if(!file.open(QIODevice::ReadOnly)) {
QMessageBox::information(0, "error", file.errorString());
}
QTextStream in(&file);
while(!in.atEnd()) {
QString line = in.readLine();
QStringList fields = line.split(",");
model->appendRow(fields);
}
file.close();
This is the best way for me:
cat filename.tsv |
while read FILENAME
do
sudo find /PATH_FROM/ -name "$FILENAME" -maxdepth 4 -exec cp '{}' /PATH_TO/ \; ;
done
I find a nice and tidy Wave game engine few days ago. It uses C# and have Windows Phone and Windows Store converters as well which makes it a great replacement of XNA for me
If the HTML is not XML you can't do it with etree. But even then, you don't have to use an external library for parsing a HTML table. In python 3 you can reach your goal with HTMLParser
from html.parser
. I've the code of the simple derived HTMLParser class here in a github repo.
You can use that class (here named HTMLTableParser
) the following way:
import urllib.request
from html_table_parser import HTMLTableParser
target = 'http://www.twitter.com'
# get website content
req = urllib.request.Request(url=target)
f = urllib.request.urlopen(req)
xhtml = f.read().decode('utf-8')
# instantiate the parser and feed it
p = HTMLTableParser()
p.feed(xhtml)
print(p.tables)
The output of this is a list of 2D-lists representing tables. It looks maybe like this:
[[[' ', ' Anmelden ']],
[['Land', 'Code', 'Für Kunden von'],
['Vereinigte Staaten', '40404', '(beliebig)'],
['Kanada', '21212', '(beliebig)'],
...
['3424486444', 'Vodafone'],
[' Zeige SMS-Kurzwahlen für andere Länder ']]]
Just to add on these answers is that, mod_php is the oldest and slowest method available in HTTPD server to use PHP. It is not recommended, unless you are running old versions of Apache HTTPD and PHP. php-fpm and proxy_cgi are the preferred methods.
Use this instead:
$('#save').click(function () {
$('#mytable').find('input[type="checkbox"]:checked') //...
});
Let me explain you what the selector does:
input[type="checkbox"]
means that this will match each <input />
with type attribute type
equals to checkbox
After that: :checked
will match all checked checkboxes.
You can loop over these checkboxes with:
$('#save').click(function () {
$('#mytable').find('input[type="checkbox"]:checked').each(function () {
//this is the current checkbox
});
});
Here is demo in JSFiddle.
And here is a demo which solves exactly your problem http://jsfiddle.net/DuE8K/1/.
$('#save').click(function () {
$('#mytable').find('tr').each(function () {
var row = $(this);
if (row.find('input[type="checkbox"]').is(':checked') &&
row.find('textarea').val().length <= 0) {
alert('You must fill the text area!');
}
});
});
Because the answer is no longer valid with a more stable version of angular, I am posting a newer solution.
PHP Page: session.php
if (!isset($_SESSION))
{
session_start();
}
$_SESSION['variable'] = "hello world";
$sessions = array();
$sessions['variable'] = $_SESSION['variable'];
header('Content-Type: application/json');
echo json_encode($sessions);
Send back only the session variables you want in Angular not all of them don't want to expose more than what is needed.
JS All Together
var app = angular.module('StarterApp', []);
app.controller("AppCtrl", ['$rootScope', 'Session', function($rootScope, Session) {
Session.then(function(response){
$rootScope.session = response;
});
}]);
app.factory('Session', function($http) {
return $http.get('/session.php').then(function(result) {
return result.data;
});
});
HTML
Inside your html you can reference your session
<html ng-app="StarterApp">
<body ng-controller="AppCtrl">
{{ session.variable }}
</body>
You can follow these steps to modify your java class:
I have Used it as follow and it is working perfectly.
import React from 'react';
import * as moment from 'moment'
exports default class MyComponent extends React.Component {
render() {
<div>
{moment(dateToBeFormate).format('DD/MM/YYYY')}
</div>
}
}
del list[:]
Will delete the values of that list variable
del list
Will delete the variable itself from memory
I have just tested the following pipeline and it works
parallel firstBranch: {
stage ('Starting Test')
{
build job: 'test1', parameters: [string(name: 'Environment', value: "$env.Environment")]
}
}, secondBranch: {
stage ('Starting Test2')
{
build job: 'test2', parameters: [string(name: 'Environment', value: "$env.Environment")]
}
}
This Job named 'trigger-test' accepts one parameter named 'Environment'
Job 'test1' and 'test2' are simple jobs:
Example for 'test1'
On execution, I am able to see both stages running in the same time