You can do this with a custom action. You can add a refrence to your custom action under <InstallExecuteSequence>:

<InstallExecuteSequence>
...
  <Custom Action="FileCleaner" After='InstallFinalize'>
          Installed AND NOT UPGRADINGPRODUCTCODE</Custom>

Then you will also have to define your Action under <Product>:

<Product> 
...
  <CustomAction Id='FileCleaner' BinaryKey='FileCleanerEXE' 
                ExeCommand='' Return='asyncNoWait'  />

Where FileCleanerEXE is a binary (in my case a little c++ program that does the custom action) which is also defined under <Product>:

<Product> 
...
  <Binary Id="FileCleanerEXE" SourceFile="path\to\fileCleaner.exe" />

The real trick to this is the Installed AND NOT UPGRADINGPRODUCTCODE condition on the Custom Action, with out that your action will get run on every upgrade (since an upgrade is really an uninstall then reinstall). Which if you are deleting files is probably not want you want during upgrading.

On a side note: I recommend going through the trouble of using something like C++ program to do the action, instead of a batch script because of the power and control it provides -- and you can prevent the "cmd prompt" window from flashing while your installer runs.

There are a number of ways that you could do this, but the fastest might be to use IndexOf to find the index position of the letter you want to replace and then substring out the text before and after what you want to replace.

Update : From Angular v1.5, track by $index is now the standard syntax instead of using link as it gave me a ng-repeat dupes error.

I ran into this for a nested ng-repeat and the below worked.

<tbody>
    <tr ng-repeat="row in data track by $index">
    <td ng-repeat="field in headers track by $index">{{row[field.caption] }}</td>
</tr>

for macbook first i opened terminal then type

open /tmp

or in finder directory you directly enter command+shift+g then type /tmp in go to the folder.

it opens temp folder in finder. then i paste copied csv file into this folder.then again i go to postgres terminal and typed below command and then it is copied my csv data into db table

\copy recharge_operator FROM '/private/tmp/operator.csv' DELIMITER ',' CSV;

Replace double quotes with single ones:

INSERT
INTO    MY.LOGFILE
        (id,severity,category,logdate,appendername,message,extrainfo)
VALUES  (
       'dee205e29ec34',
       'FATAL',
       'facade.uploader.model',
       '2013-06-11 17:16:31',
       'LOGDB',
       NULL,
       NULL
       )

In SQL, double quotes are used to mark identifiers, not string constants.

It works if id value and name value are different:

<input type="password" class="form-control"name="password" id="mainpassword">
password: {     required: true,     } , 
cpassword: {required: true, equalTo: '#mainpassword' },

If you have WL server installed, pick it up from under
\Oracle\Middleware\wlserver_10.3\server\lib\mysql-connector-java-commercial-5.1.17-bin.jar

Otherwise, download it from:
http://www.java2s.com/Code/JarDownload/mysql/mysql-connector-java-5.1.17-bin.jar.zip

Another option if you're using vue cli 3 is to use a config file. Make a vue.config.js at the same level as your package.json and put a config like so:

module.exports = {
  devServer: {
    port: 3000
  }
}

Configuring it with the script:

npm run serve --port 3000

works great but if you have more config options I like doing it in a config file. You can find more info in the docs.

You can do it like this:

//HTML BUTTON
<button type="button" onclick="disableAll()">Disable</button>

//Jquery function
function disableAll() {
    //DISABLE ALL FIELDS THAT ARE NOT DISABLED
    $('form').find(':input:not(:disabled)').prop('disabled', true);

    //ENABLE ALL FIELDS THAT DISABLED
    //$('form').find(':input(:disabled)').prop('disabled', false);
}

I'm in agreement that using Dictionary is better running time performance then nested for loops (O(n) vs O(n^2)). However to address OP, here is a solution where a HashSet is used to prevent repeating the counting of integers already counted, such as integer 5 in example array.

static void Main(string[] args)
{              
    int[] A = { 10, 5, 10, 2, 2, 3, 4, 5, 5, 6, 7, 8, 9, 11, 12, 12 };

    var set = new HashSet<int>();
    for (int i = 0; i < A.Length - 1; i++) {
        int count = 0;
        for (int j = i; j < A.Length - 1; j++) {
            if (A[i] == A[j + 1] && !set.Contains(A[i]))
                count++;
        }
        set.Add(A[i]);
        if (count > 0) {
            Console.WriteLine("{0} occurs {1} times", A[i], count + 1);
            Console.ReadKey();
        }
    }
}

I was facing same issue so I have reinstall MySQL 8 with different Authentication Method "Use Legacy Authentication Method (Retain MySQL 5.x compatibility)" then work properly.

Choose Second Method of Authentication while installing.

Don't grant control to the user, it's totally unnecessay. Select permission on the database is enough. After you have created the login and the user on master (see above answers):

use YourDatabase
go
create user [YourDomain\YourUser] for login [YourDomain\YourUser] with default_schema=[dbo]
go
alter role [db_datareader] add member [YourDomain\YourUser]
go

I'm not sure exactly what you want, but I think it's along the lines of:

SELECT `Item`, `qty`-`BAL_QTY` as `qty` FROM ((SELECT Item, SUM(`QTY`) as qty FROM `master_table` GROUP BY `ITEM`) as A NATURAL JOIN `stock_table`) as B

aca definis los anchos

 float[] anchoDeColumnas= new float[] {10f, 20f, 30f, 10f};

aca se los insertas a la tabla que tiene las columnas

table.setWidths(anchoDeColumnas);

The browser will only detect your username if the IIS server is on the same domain and the security settings within your group policy allow it.

Otherwise you will have to provide it with credentials, but if it is not on the same domain, it will not be able to authenticate you.

Another option now may be HTML5 text to speech, which is in Chrome 33+ and many others.

Here is a sample:

var msg = new SpeechSynthesisUtterance('Hello World');
window.speechSynthesis.speak(msg);

With this, perhaps you do not need to use a web service at all.

If pip "says" six is installed but you're still getting:

ImportError: No module named six.moves

try re-installing six (worked for me):

pip uninstall six
pip install six

Take a look at ?legend and try this:

legend('topright', names(a)[-1] , 
   lty=1, col=c('red', 'blue', 'green',' brown'), bty='n', cex=.75)

Instead of using the placeholder text, you'll want to set the actual text property of the field to MM/YYYY, set the delegate of the text field and listen for this method:

- (BOOL)textField:(UITextField *)textField shouldChangeCharactersInRange:(NSRange)range replacementString:(NSString *)string {     // update the text of the label } 

Inside that method, you can figure out what the user has typed as they type, which will allow you to update the label accordingly.

SELECT (CASE WHEN ISSUE_DIVISION = ISSUE_DIVISION_2 THEN 1 ELSE 0 END) AS ISSUES
    --  <add any columns to outer select from inner query> 
  FROM
 (  -- your query here --
   select 'CARAT Issue Open' issue_comment, ...., ..., 
          substr(gcrs.stream_name,1,case when instr(gcrs.stream_name,' (')=0 then 100 else  instr(gcrs.stream_name,' (')-1 end) ISSUE_DIVISION,
          case when gcrs.STREAM_NAME like 'NON-GT%' THEN 'NON-GT' ELSE gcrs.STREAM_NAME END as ISSUE_DIVISION_2
     from ....
    where UPPER(ISSUE_STATUS) like '%OPEN%'
 )
 WHERE... -- optional --

I have found an excellent and relatively short explanation here.

A multipart request is a REST request containing several packed REST requests inside its entity.

Object Serialization uses the Serializable and Externalizable interfaces. A Java object is only serializable. if a class or any of its superclasses implements either the java.io.Serializable interface or its subinterface, java.io.Externalizable. Most of the java class are serializable.

• NotSerializableException: packageName.ClassName « To participate a Class Object in serialization process, The class must implement either Serializable or Externalizable interface.

Serializable Interface

Object Serialization produces a stream with information about the Java classes for the objects which are being saved. For serializable objects, sufficient information is kept to restore those objects even if a different (but compatible) version of the implementation of the class is present. The Serializable interface is defined to identify classes which implement the serializable protocol:

package java.io;

public interface Serializable {};

• The serialization interface has no methods or fields and serves only to identify the semantics of being serializable. For serializing/deserializing a class, either we can use default writeObject and readObject methods (or) we can overriding writeObject and readObject methods from a class.
• JVM will have complete control in serializing the object. use transient keyword to prevent the data member from being serialized.
• Here serializable objects is reconstructed directly from the stream without executing
• InvalidClassException « In deserialization process, if local class serialVersionUID value is different from the corresponding sender's class. then result's in conflict as java.io.InvalidClassException: com.github.objects.User; local class incompatible: stream classdesc serialVersionUID = 5081877, local class serialVersionUID = 50818771
• The values of the non-transient and non-static fields of the class get serialized.

Externalizable Interface

For Externalizable objects, only the identity of the class of the object is saved by the container; the class must save and restore the contents. The Externalizable interface is defined as follows:

package java.io;

public interface Externalizable extends Serializable
{
    public void writeExternal(ObjectOutput out)
        throws IOException;

    public void readExternal(ObjectInput in)
        throws IOException, java.lang.ClassNotFoundException;
}

• The Externalizable interface has two methods, an externalizable object must implement a writeExternal and readExternal methods to save/restore the state of an object.
• Programmer has to take care of which objects to be serialized. As a programmer take care of Serialization So, here transient keyword will not restrict any object in Serialization process.
• When an Externalizable object is reconstructed, an instance is created using the public no-arg constructor, then the readExternal method called. Serializable objects are restored by reading them from an ObjectInputStream.

• OptionalDataException « The fields MUST BE IN THE SAME ORDER AND TYPE as we wrote them out. If there is any mismatch of type from the stream it throws OptionalDataException.

  @Override public void writeExternal(ObjectOutput out) throws IOException {
      out.writeInt( id );
      out.writeUTF( role );
      out.writeObject(address);
  }
  @Override public void readExternal(ObjectInput in) throws IOException, ClassNotFoundException {
      this.id = in.readInt();
      this.address = (Address) in.readObject();
      this.role = in.readUTF();
  }
  

• The instance fields of the class which written (exposed) to ObjectOutput get serialized.

Example « implements Serializable

class Role {
    String role;
}
class User extends Role implements Serializable {

    private static final long serialVersionUID = 5081877L;
    Integer id;
    Address address;

    public User() {
        System.out.println("Default Constructor get executed.");
    }
    public User( String role ) {
        this.role = role;
        System.out.println("Parametarised Constructor.");
    }
}

class Address implements Serializable {

    private static final long serialVersionUID = 5081877L;
    String country;
}

Example « implements Externalizable

class User extends Role implements Externalizable {

    Integer id;
    Address address;
    // mandatory public no-arg constructor
    public User() {
        System.out.println("Default Constructor get executed.");
    }
    public User( String role ) {
        this.role = role;
        System.out.println("Parametarised Constructor.");
    }

    @Override
    public void writeExternal(ObjectOutput out) throws IOException {
        out.writeInt( id );
        out.writeUTF( role );
        out.writeObject(address);
    }
    @Override
    public void readExternal(ObjectInput in) throws IOException, ClassNotFoundException {
        this.id = in.readInt();
        this.address = (Address) in.readObject();
        this.role = in.readUTF();
    }
}

Example

public class CustomClass_Serialization {
    static String serFilename = "D:/serializable_CustomClass.ser";

    public static void main(String[] args) throws IOException {
        Address add = new Address();
        add.country = "IND";

        User obj = new User("SE");
        obj.id = 7;
        obj.address = add;

        // Serialization
        objects_serialize(obj, serFilename);
        objects_deserialize(obj, serFilename);

        // Externalization
        objects_WriteRead_External(obj, serFilename);
    }

    public static void objects_serialize( User obj, String serFilename ) throws IOException{
        FileOutputStream fos = new FileOutputStream( new File( serFilename ) );
        ObjectOutputStream objectOut = new ObjectOutputStream( fos );

        // java.io.NotSerializableException: com.github.objects.Address
        objectOut.writeObject( obj );
        objectOut.flush();
        objectOut.close();
        fos.close();

        System.out.println("Data Stored in to a file");
    }
    public static void objects_deserialize( User obj, String serFilename ) throws IOException{
        try {
            FileInputStream fis = new FileInputStream( new File( serFilename ) );
            ObjectInputStream ois = new ObjectInputStream( fis );
            Object readObject;
            readObject = ois.readObject();
            String calssName = readObject.getClass().getName();
            System.out.println("Restoring Class Name : "+ calssName); // InvalidClassException

            User user = (User) readObject;
            System.out.format("Obj[Id:%d, Role:%s] \n", user.id, user.role);

            Address add = (Address) user.address;
            System.out.println("Inner Obj : "+ add.country );
            ois.close();
        } catch (ClassNotFoundException e) {
            e.printStackTrace();
        }
    }

    public static void objects_WriteRead_External( User obj, String serFilename ) throws IOException {
        FileOutputStream fos = new FileOutputStream(new File( serFilename ));
        ObjectOutputStream objectOut = new ObjectOutputStream( fos );

        obj.writeExternal( objectOut );
        objectOut.flush();

        fos.close();

        System.out.println("Data Stored in to a file");

        try {
            // create a new instance and read the assign the contents from stream.
            User user = new User();

            FileInputStream fis = new FileInputStream(new File( serFilename ));
            ObjectInputStream ois = new ObjectInputStream( fis );

            user.readExternal(ois);

            System.out.format("Obj[Id:%d, Role:%s] \n", user.id, user.role);

            Address add = (Address) user.address;
            System.out.println("Inner Obj : "+ add.country );
            ois.close();
        } catch (ClassNotFoundException e) {
            e.printStackTrace();
        }
    }
}

@see

• What is Object Serialization
• Object Serialization: Frequently Asked Questions

I found that I can't successfully add the event listener unless I pass true like so:

componentDidMount = () => {
    window.addEventListener('scroll', this.handleScroll, true);
},

I want to add this answer because the DBCC CHECKIDENT-approach will product problems when you use schemas for tables. Use this to be sure:

DECLARE @Table AS NVARCHAR(500) = 'myschema.mytable';
DBCC CHECKIDENT (@Table, RESEED, 0);

If you want to check the success of the operation, use

SELECT IDENT_CURRENT(@Table);

which should output 0 in the example above.

Click on Wamp icon and open Apache/httpd.conf and search "#LoadModule rewrite_module modules/mod_rewrite.so". Remove # as below and save it

LoadModule rewrite_module modules/mod_rewrite.so

and restart all service.

This phpMyAdmin query is returning those rows, that are NOT null or empty or just whitespaces:

SELECT * FROM `table_name` WHERE NOT ((`column_name` IS NULL) OR (TRIM(`column_name`) LIKE ''))

if you want to select rows that are null/empty/just whitespaces just remove NOT.

In my case, the problem was another. I was trying convert lists of lists of int to array. The problem was that there was one list with a different length than others. If you want to prove it, you must do:

print([i for i,x in enumerate(list) if len(x) != 560])

In my case, the length reference was 560.

For this type error: UnexpectedTypeException ERROR: We are trying to use incorrect Hibernate validator annotation on any bean property. For this same issue for my Springboot project( validating type 'java.lang.Integer')

The solution that worked for me is using @NotNull for Integer.

By far the easiest way to echo in powershell, is just create the string object and let the pipeline output it:

$filesizecounter = 8096
"filesizecounter : $filesizecounter"

Of course, you do give up some flexibility when not using the Write-* methods.

Null Coalescing operator performs just two tasks: it checks whether the variable is set and whether it is null. Have a look at the following example:

<?php
# case 1:
$greeting = 'Hola';
echo $greeting ?? 'Hi There'; # outputs: 'Hola'

# case 2:
$greeting = null;
echo $greeting ?? 'Hi There'; # outputs: 'Hi There'

# case 3:
unset($greeting);
echo $greeting ?? 'Hi There'; # outputs: 'Hi There'

The above code example states that Null Coalescing operator treats a non-existing variable and a variable which is set to NULL in the same way.

Null Coalescing operator is an improvement over the ternary operator. Have a look at the following code snippet comparing the two:

<?php /* example: checking for the $_POST field that goes by the name of 'fullname'*/
# in ternary operator
echo "Welcome ", (isset($_POST['fullname']) && !is_null($_POST['fullname']) ? $_POST['fullname'] : 'Mr. Whosoever.'); # outputs: Welcome Mr. Whosoever.
# in null coalecing operator
echo "Welcome ", ($_POST['fullname'] ?? 'Mr. Whosoever.'); # outputs: Welcome Mr. Whosoever.

So, the difference between the two is that Null Coalescing operator operator is designed to handle undefined variables better than the ternary operator. Whereas, the ternary operator is a shorthand for if-else.

Null Coalescing operator is not meant to replace ternary operator, but in some use cases like in the above example, it allows you to write clean code with less hassle.

Credits: http://dwellupper.io/post/6/php7-null-coalescing-operator-usage-and-examples

My solution:

edit: I've added even a better solution at the end, using Modern Obj-C

1.
Put names as keys in an array.
Make sure the indexes are the appropriate enums, and in the right order (otherwise exception).
note: names is a property synthesized as *_names*;

code was not checked for compilation, but I used the same technique in my app.

typedef enum {
  JSON,
  XML,
  Atom,
  RSS
} FormatType;

+ (NSArray *)names
{
    static NSMutableArray * _names = nil;
    static dispatch_once_t onceToken;
    dispatch_once(&onceToken, ^{
        _names = [NSMutableArray arrayWithCapacity:4];
        [_names insertObject:@"JSON" atIndex:JSON];
        [_names insertObject:@"XML" atIndex:XML];
        [_names insertObject:@"Atom" atIndex:Atom];
        [_names insertObject:@"RSS" atIndex:RSS];
    });

    return _names;
}

+ (NSString *)nameForType:(FormatType)type
{
    return [[self names] objectAtIndex:type];
}

//

2.
Using Modern Obj-C you we can use a dictionary to tie descriptions to keys in the enum.
Order DOES NOT matter.

typedef NS_ENUM(NSUInteger, UserType) {
    UserTypeParent = 0,
    UserTypeStudent = 1,
    UserTypeTutor = 2,
    UserTypeUnknown = NSUIntegerMax
};  

@property (nonatomic) UserType type;

+ (NSDictionary *)typeDisplayNames
{
    return @{@(UserTypeParent) : @"Parent",
             @(UserTypeStudent) : @"Student",
             @(UserTypeTutor) : @"Tutor",
             @(UserTypeUnknown) : @"Unknown"};
}

- (NSString *)typeDisplayName
{
    return [[self class] typeDisplayNames][@(self.type)];
}

Usage (in a class instance method):

NSLog(@"%@", [self typeDisplayName]);

I've seen those terms used interchangeably, but there are different ways of implementing it:

1. Send a cookie on the first response and then look for it on subsequent ones. The cookie says which real server to send to.
   Bad if you have to support cookie-less browsers
2. Partition based on the requester's IP address.
   Bad if it isn't static or if many come in through the same proxy.
3. If you authenticate users, partition based on user name (it has to be an HTTP supported authentication mode to do this).
4. Don't require state.
   Let clients hit any server (send state to the client and have them send it back)
   This is not a sticky session, it's a way to avoid having to do it.

I would suspect that sticky might refer to the cookie way, and that affinity might refer to #2 and #3 in some contexts, but that's not how I have seen it used (or use it myself)

Barn's answer worked for me with modification because my column is not compressed. The quick and dirty solution:

select * from my_table
where dbms_lob.instr(my_UNcompressed_blob, utl_raw.cast_to_raw('MY_SEARCH_STRING'))>0;

In java 8 , It's really easy to get timestamp in UTC by using java 8 java.time.Instant library :

Instant.now();

That few word of code will return the UTC Timestamp.

For modern browsers, use toLocaleString:

var num = 1.345;
num.toLocaleString(undefined, { maximumFractionDigits: 2, minimumFractionDigits: 2 });

Specify a locale tag as first parameter to control the decimal separator. For a dot, use for example English U.S. locale:

num.toLocaleString("en-US", { maximumFractionDigits: 2, minimumFractionDigits: 2 });

which gives:

1.35

Most countries in Europe use a comma as decimal separator, so if you for example use Swedish/Sweden locale:

num.toLocaleString("sv-SE", { maximumFractionDigits: 2, minimumFractionDigits: 2 });

it will give:

1,35

All the random methods end up calling random.random() so the best way is to call it directly:

[int(1000*random.random()) for i in xrange(10000)]

For example,

• random.randint calls random.randrange.
• random.randrange has a bunch of overhead to check the range before returning istart + istep*int(self.random() * n).

NumPy is much faster still of course.

Based on Justin's answer above I came up with this:

    /// <summary>
    /// Converts Enum Value to different Enum Value (by Value Name) See https://stackoverflow.com/a/31993512/6500501.
    /// </summary>
    /// <typeparam name="TEnum">The type of the enum to convert to.</typeparam>
    /// <param name="source">The source enum to convert from.</param>
    /// <returns></returns>
    /// <exception cref="InvalidOperationException"></exception>
    public static TEnum ConvertTo<TEnum>(this Enum source)
    {
        try
        {
            return (TEnum) Enum.Parse(typeof(TEnum), source.ToString(), ignoreCase: true);
        }
        catch (ArgumentException aex)
        {
            throw new InvalidOperationException
            (
                $"Could not convert {source.GetType().ToString()} [{source.ToString()}] to {typeof(TEnum).ToString()}", aex
            );
        }
    }

As with most things you should pick which to use based on the context and what is conceptually the correct way to go. A switch is really saying "pick one of these based on this variables value" but an if statement is just a series of boolean checks.

As an example, if you were doing:

int value = // some value
if (value == 1) {
    doThis();
} else if (value == 2) {
    doThat();
} else {
    doTheOther();
}

This would be much better represented as a switch as it then makes it immediately obviously that the choice of action is occurring based on the value of "value" and not some arbitrary test.

Also, if you find yourself writing switches and if-elses and using an OO language you should be considering getting rid of them and using polymorphism to achieve the same result if possible.

Finally, regarding switch taking longer to type, I can't remember who said it but I did once read someone ask "is your typing speed really the thing that affects how quickly you code?" (paraphrased)

Alternatively, you can give the "full location" to the database in your queries a la:

SELECT photo_id FROM [my database name].photogallery;

If using one more often than others, use USE. Even if you do, you can still use the database.table syntax.

This seems to be the fastest solution I could come up with, and is faster than os.walk and a lot faster than any glob solution.

• It will also give you a list of all nested subfolders at basically no cost.
• You can search for several different extensions.
• You can also choose to return either full paths or just the names for the files by changing f.path to f.name (do not change it for subfolders!).

Args: dir: str, ext: list.
Function returns two lists: subfolders, files.

See below for a detailed speed anaylsis.

def run_fast_scandir(dir, ext):    # dir: str, ext: list
    subfolders, files = [], []

    for f in os.scandir(dir):
        if f.is_dir():
            subfolders.append(f.path)
        if f.is_file():
            if os.path.splitext(f.name)[1].lower() in ext:
                files.append(f.path)


    for dir in list(subfolders):
        sf, f = run_fast_scandir(dir, ext)
        subfolders.extend(sf)
        files.extend(f)
    return subfolders, files


subfolders, files = run_fast_scandir(folder, [".jpg"])

In case you need the file size, you can also create a sizes list and add f.stat().st_size like this for a display of MiB:

sizes.append(f"{f.stat().st_size/1024/1024:.0f} MiB")

Speed analysis

for various methods to get all files with a specific file extension inside all subfolders and the main folder.

tl;dr:

• fast_scandir clearly wins and is twice as fast as all other solutions, except os.walk.
• os.walk is second place slighly slower.
• using glob will greatly slow down the process.
• None of the results use natural sorting. This means results will be sorted like this: 1, 10, 2. To get natural sorting (1, 2, 10), please have a look at https://stackoverflow.com/a/48030307/2441026

fast_scandir    took  499 ms. Found files: 16596. Found subfolders: 439
os.walk         took  589 ms. Found files: 16596
find_files      took  919 ms. Found files: 16596
glob.iglob      took  998 ms. Found files: 16596
glob.glob       took 1002 ms. Found files: 16596
pathlib.rglob   took 1041 ms. Found files: 16596
os.walk-glob    took 1043 ms. Found files: 16596

Tests were done with W7x64, Python 3.8.1, 20 runs. 16596 files in 439 (partially nested) subfolders.
find_files is from https://stackoverflow.com/a/45646357/2441026 and lets you search for several extensions.
fast_scandir was written by myself and will also return a list of subfolders. You can give it a list of extensions to search for (I tested a list with one entry to a simple if ... == ".jpg" and there was no significant difference).

# -*- coding: utf-8 -*-
# Python 3


import time
import os
from glob import glob, iglob
from pathlib import Path


directory = r"<folder>"
RUNS = 20


def run_os_walk():
    a = time.time_ns()
    for i in range(RUNS):
        fu = [os.path.join(dp, f) for dp, dn, filenames in os.walk(directory) for f in filenames if
                  os.path.splitext(f)[1].lower() == '.jpg']
    print(f"os.walk\t\t\ttook {(time.time_ns() - a) / 1000 / 1000 / RUNS:.0f} ms. Found files: {len(fu)}")


def run_os_walk_glob():
    a = time.time_ns()
    for i in range(RUNS):
        fu = [y for x in os.walk(directory) for y in glob(os.path.join(x[0], '*.jpg'))]
    print(f"os.walk-glob\ttook {(time.time_ns() - a) / 1000 / 1000 / RUNS:.0f} ms. Found files: {len(fu)}")


def run_glob():
    a = time.time_ns()
    for i in range(RUNS):
        fu = glob(os.path.join(directory, '**', '*.jpg'), recursive=True)
    print(f"glob.glob\t\ttook {(time.time_ns() - a) / 1000 / 1000 / RUNS:.0f} ms. Found files: {len(fu)}")


def run_iglob():
    a = time.time_ns()
    for i in range(RUNS):
        fu = list(iglob(os.path.join(directory, '**', '*.jpg'), recursive=True))
    print(f"glob.iglob\t\ttook {(time.time_ns() - a) / 1000 / 1000 / RUNS:.0f} ms. Found files: {len(fu)}")


def run_pathlib_rglob():
    a = time.time_ns()
    for i in range(RUNS):
        fu = list(Path(directory).rglob("*.jpg"))
    print(f"pathlib.rglob\ttook {(time.time_ns() - a) / 1000 / 1000 / RUNS:.0f} ms. Found files: {len(fu)}")


def find_files(files, dirs=[], extensions=[]):
    # https://stackoverflow.com/a/45646357/2441026

    new_dirs = []
    for d in dirs:
        try:
            new_dirs += [ os.path.join(d, f) for f in os.listdir(d) ]
        except OSError:
            if os.path.splitext(d)[1].lower() in extensions:
                files.append(d)

    if new_dirs:
        find_files(files, new_dirs, extensions )
    else:
        return


def run_fast_scandir(dir, ext):    # dir: str, ext: list
    # https://stackoverflow.com/a/59803793/2441026

    subfolders, files = [], []

    for f in os.scandir(dir):
        if f.is_dir():
            subfolders.append(f.path)
        if f.is_file():
            if os.path.splitext(f.name)[1].lower() in ext:
                files.append(f.path)


    for dir in list(subfolders):
        sf, f = run_fast_scandir(dir, ext)
        subfolders.extend(sf)
        files.extend(f)
    return subfolders, files



if __name__ == '__main__':
    run_os_walk()
    run_os_walk_glob()
    run_glob()
    run_iglob()
    run_pathlib_rglob()


    a = time.time_ns()
    for i in range(RUNS):
        files = []
        find_files(files, dirs=[directory], extensions=[".jpg"])
    print(f"find_files\t\ttook {(time.time_ns() - a) / 1000 / 1000 / RUNS:.0f} ms. Found files: {len(files)}")


    a = time.time_ns()
    for i in range(RUNS):
        subf, files = run_fast_scandir(directory, [".jpg"])
    print(f"fast_scandir\ttook {(time.time_ns() - a) / 1000 / 1000 / RUNS:.0f} ms. Found files: {len(files)}. Found subfolders: {len(subf)}")

Operators first() and take(1) aren't the same.

The first() operator takes an optional predicate function and emits an error notification when no value matched when the source completed.

For example this will emit an error:

import { EMPTY, range } from 'rxjs';
import { first, take } from 'rxjs/operators';

EMPTY.pipe(
  first(),
).subscribe(console.log, err => console.log('Error', err));

... as well as this:

range(1, 5).pipe(
  first(val => val > 6),
).subscribe(console.log, err => console.log('Error', err));

While this will match the first value emitted:

range(1, 5).pipe(
  first(),
).subscribe(console.log, err => console.log('Error', err));

On the other hand take(1) just takes the first value and completes. No further logic is involved.

range(1, 5).pipe(
  take(1),
).subscribe(console.log, err => console.log('Error', err));

Then with empty source Observable it won't emit any error:

EMPTY.pipe(
  take(1),
).subscribe(console.log, err => console.log('Error', err));

Jan 2019: Updated for RxJS 6

Please find answer:

public class Customer {

    public static void main(String[] args) {
        Customer customer=new Customer();
        customer.business();
    }

    public void business(){
        System.out.println("Hi Harry");
    }
}

There's no longer any need to submit a new build or modify Info.plist; instead, follow these steps using an Admin or App Manager account:

1. Go to the iOS tab at the top left of TestFlight and click the yellow triangle next to the warning to provide this information within iTunes Connect:

2. Click the "Provide Export Compliance Information" link in the popup:

Though, if you do choose to modify Info.plist, you'll never need to deal with this popup again.

Use executeUpdate() to issue data manipulation statements. executeQuery() is only meant for SELECT queries (i.e. queries that return a result set).

The simplest possible solution I found was:

In your markup:

<a [href]="location.path()">Reload</a>

and in your component typescript file:

constructor(
        private location: Location
  ) { }

This was happening for me because I had fromArrayName instead of formArrayName somewhere

This seems to be answered - #include <fstream>.

The message means :-

incomplete type - the class has not been defined with a full class. The compiler has seen statements such as class ifstream; which allow it to understand that a class exists, but does not know how much memory the class takes up.

The forward declaration allows the compiler to make more sense of :-

void BindInput( ifstream & inputChannel ); 

It understands the class exists, and can send pointers and references through code without being able to create the class, see any data within the class, or call any methods of the class.

The has initializer seems a bit extraneous, but is saying that the incomplete object is being created.

With the following function you are just sending the pure ICMP packets using socket_create. I got the following code from a user note there. N.B. You must run the following as root.

Although you can't put this in a standard web page you can run it as a cron job and populate a database with the results.

So it's best suited if you need to monitor a site.

function twitterIsUp() {
    return ping('twitter.com');
}

function ping ($host, $timeout = 1) {
    /* ICMP ping packet with a pre-calculated checksum */
    $package = "\x08\x00\x7d\x4b\x00\x00\x00\x00PingHost";
    $socket = socket_create(AF_INET, SOCK_RAW, 1);
    socket_set_option($socket, SOL_SOCKET, SO_RCVTIMEO, array('sec' => $timeout, 'usec' => 0));
    socket_connect($socket, $host, null);

    $ts = microtime(true);
    socket_send($socket, $package, strLen($package), 0);
    if (socket_read($socket, 255)) {    
        $result = microtime(true) - $ts;
    } else {
        $result = false;
    }
    socket_close($socket);

    return $result;
}

The folder containing your Anaconda installation contains a subfolder called conda-meta with json files for all installed packages, including one for Anaconda itself. Look for anaconda-<version>-<build>.json.

My file is called anaconda-5.0.1-py27hdb50712_1.json, and at the bottom is more info about the version:

"installed_by": "Anaconda2-5.0.1-Windows-x86_64.exe", 
"link": { "source": "C:\\ProgramData\\Anaconda2\\pkgs\\anaconda-5.0.1-py27hdb50712_1" }, 
"name": "anaconda", 
"platform": "win", 
"subdir": "win-64", 
"url": "https://repo.continuum.io/pkgs/main/win-64/anaconda-5.0.1-py27hdb50712_1.tar.bz2", 
"version": "5.0.1"

(Slightly edited for brevity.)

The output from conda -V is the conda version.

Twood, Visibility expression is the expressions you write on how you want the "visibility" to behave. So, if you would want to hide or show the textbox, you want to write this:

=IIf((CountRows("ScannerStatisticsData")=0),True,False)

This means, if the dataset is 0, you want to hide the textbox.

Finding the linked examples somewhat confusing, I worked out some code that demonstrates a working array insert into a test table (jkl_test). Here's the table:

create table jkl_test (id number(9));

Here is .Net code for a simple Console application that connects to Oracle using ODP.Net and inserts an array of 5 integers:

using Oracle.DataAccess.Client;

namespace OracleArrayInsertExample
{
    class Program
    {
        static void Main(string[] args)
        {
            // Open a connection using ODP.Net
            var connection = new OracleConnection("Data Source=YourDatabase; Password=YourPassword; User Id=YourUser");
            connection.Open();

            // Create an insert command
            var command = connection.CreateCommand();
            command.CommandText = "insert into jkl_test values (:ids)";

            // Set up the parameter and provide values
            var param = new OracleParameter("ids", OracleDbType.Int32);
            param.Value = new int[] { 22, 55, 7, 33, 11 };

            // This is critical to the process; in order for the command to 
            // recognize and bind arrays, an array bind count must be specified.
            // Set it to the length of the array.
            command.ArrayBindCount = 5;
            command.Parameters.Add(param);
            command.ExecuteNonQuery();
        }
    }
}

For MySql you can do something like the following:

select OrderNO, PartCode, Quantity from table a
join (select ID, MAX(DateEntered) from table group by OrderNO) b on a.ID = b.ID

There are problems with some data. Consider:

as.double(as.character("2.e")) # This results in 2

Another solution:

get_numbers <- function(X) {
    X[toupper(X) != tolower(X)] <- NA
    return(as.double(as.character(X)))
}

This question has been already answered in Unicode characters in Windows command line - how?

You missed one step -> you need to use Lucida console fonts in addition to executing chcp 65001 from cmd console.

Thank you guys for the help,

When I asked at first I didn't think it's even possible, but after your answers I googled and found this amazing tutorial:

http://blog.thomaslebrun.net/2011/11/html-5-how-to-customize-the-error-message-for-a-required-field/#.UsNN1BYrh2M

As of now:

• Only the creator of the channel can add a bot.
• Other administrators can't add bots to channels.
• Channel can be public or private (doesn't matter)
• bots can be added only as admins, not members.*

To add the bot to your channel:

• click on the channel name:

• click on admins:

• click on Add Admin:

• search for your bot like @your_bot_name, and click add:**

* In some platforms like mac native telegram client it may look like that you can add bot as a member, but at the end it won't work.
** the bot doesn't need to be in your contact list.

You can do that using count:

my_dict = {i:MyList.count(i) for i in MyList}

>>> print my_dict     #or print(my_dict) in python-3.x
{'a': 3, 'c': 3, 'b': 1}

Or using collections.Counter:

from collections import Counter

a = dict(Counter(MyList))

>>> print a           #or print(a) in python-3.x
{'a': 3, 'c': 3, 'b': 1}

"Unable to find valid certification path to requested target"

If you are getting this message, you probably are behind a Proxy on your company, which probably is signing all request certificates with your company root CA certificate, this certificate is trusted only inside your company, so Android Studio cannot validate any certificate signed with your company certificate as valid, so, you need to tell Android Studio to trust your company certificate, you do that by adding your company certificate to Android Studio truststore.

(I'm doing this on macOS, but should be similar on Linux or Windows)

• First, you need to save your company root CA certificate as a file: you can ask this certificate to your IT department, or download it yourself, here is how. Open your browser and open this url, for example, https://jcenter.bintray.com/ or https://search.maven.org/, click on the lock icon and then click on Show certificate

On the popup window, to save the root certificate as a file, make sure to select the top level of the certificates chain (the root cert) and drag the certificate image to a folder/directory on your disk drive. It should be saved as a file as, for example: my-root-ca-cert.cer, or my-root-ca-cert.pem

• Second, let's add this certificate to the accepted Server Certificates of Android Studio:

On Android Studio open Preferences -> Tools -> Server Certificates, on the box Accepted certificates click the plus icon (+), search the certificate you saved previously and click Apply and OK

• Third, you need to add the certificate to the Android Studio JDK truststore (Gradle use this JDK to build the project, so it's important):

In Android Studio open File -> Project Structure -> SDK Location -> JDK Location

Copy the path of JDK Location, and open the Terminal, and change your directory to that path, for example, execute:

cd /Applications/Android\ Studio.app/Contents/jre/jdk/Contents/Home/

(don't forget to scape the whitespace, "\ ")

Now, to import the certificate to the truststore, execute:

./bin/keytool -importcert -file /path/to/your/certificate/my-root-ca-cert.cer -keystore ./jre/lib/security/cacerts -storepass changeit -noprompt

• Finally, restart Android Studio, or better click File -> Invalidate Caches / Restart

Done, you should be able to build your project now.

Create vector, push_back element, then modify it as so:

struct subject {
    string name;
    int marks;
    int credits;
};


int main() {
    vector<subject> sub;

    //Push back new subject created with default constructor.
    sub.push_back(subject());

    //Vector now has 1 element @ index 0, so modify it.
    sub[0].name = "english";

    //Add a new element if you want another:
    sub.push_back(subject());

    //Modify its name and marks.
    sub[1].name = "math";
    sub[1].marks = 90;
}

You cant access a vector with [#] until an element exists in the vector at that index. This example populates the [#] and then modifies it afterward.

I've used this process to attach a 3rd party Jar to an Android project in IDEA.

• Copy the Jar to your libs/ directory
• Open Project Settings (Ctrl Alt Shift S)
• Under the Project Settings panel on the left, choose Modules
• On the larger right pane, choose the Dependencies tab
• Press the Add... button on the far right of the screen (if you have a smaller screen like me, you may have to drag resize to the right in order to see it)
• From the dropdown of Add options, choose "Library". A "Choose Libraries" dialog will appear.
• Press "New Library..."
• Choose a suitable title for the library
• Press "Attach Classes..."
• Choose the Jar from your libs/ directory, and press OK to dismiss

The library should now be recognised.

2018 Update

Now you can use just window.scrollTo({ top: 0, behavior: 'smooth' }) to get the page scrolled with a smooth effect.

const btn = document.getElementById('elem');_x000D_
_x000D_
btn.addEventListener('click', () => window.scrollTo({_x000D_
  top: 400,_x000D_
  behavior: 'smooth',_x000D_
}));

#x {_x000D_
  height: 1000px;_x000D_
  background: lightblue;_x000D_
}

<div id='x'>_x000D_
  <button id='elem'>Click to scroll</button>_x000D_
</div>

Older solutions

You can do something like this:

var btn = document.getElementById('x');_x000D_
_x000D_
btn.addEventListener("click", function() {_x000D_
  var i = 10;_x000D_
  var int = setInterval(function() {_x000D_
    window.scrollTo(0, i);_x000D_
    i += 10;_x000D_
    if (i >= 200) clearInterval(int);_x000D_
  }, 20);_x000D_
})

body {_x000D_
  background: #3a2613;_x000D_
  height: 600px;_x000D_
}

<button id='x'>click</button>

ES6 recursive approach:

const btn = document.getElementById('elem');_x000D_
_x000D_
const smoothScroll = (h) => {_x000D_
  let i = h || 0;_x000D_
  if (i < 200) {_x000D_
    setTimeout(() => {_x000D_
      window.scrollTo(0, i);_x000D_
      smoothScroll(i + 10);_x000D_
    }, 10);_x000D_
  }_x000D_
}_x000D_
_x000D_
btn.addEventListener('click', () => smoothScroll());

body {_x000D_
  background: #9a6432;_x000D_
  height: 600px;_x000D_
}

<button id='elem'>click</button>

This is an intuitive solution using the viewport command that just sets the minimum height to the viewport height minus the footer height.

html,body{
height: 100%
}
#nonFooter{
min-height: calc(100vh - 30px)
}

#footer {
height:30px;
margin: 0;
clear: both;
width:100%;
}

If you are using jailcoder, make sure you jailbreak your iphone successfully. Don't forget install AppSync for IOS in Cydia.

Check if condition == null; It will resolve the problem

I'm not sure if you want to find duplicate files or just compare two single files. If the latter, the above approach (filecmp) is better, if the former, the following approach is better.

There are lots of duplicate files detection questions here. Assuming they are not very small and that performance is important, you can

• Compare file sizes first, discarding all which doesn't match
• If file sizes match, compare using the biggest hash you can handle, hashing chunks of files to avoid reading the whole big file

Here's is an answer with Python implementations (I prefer the one by nosklo, BTW)

As the error messages stated, ngFor only supports Iterables such as Array, so you cannot use it for Object.

change

private extractData(res: Response) {
  let body = <Afdelingen[]>res.json();
  return body || {};       // here you are return an object
}

to

private extractData(res: Response) {
  let body = <Afdelingen[]>res.json().afdelingen;    // return array from json file
  return body || [];     // also return empty array if there is no data
}

public static void printPyramid(int number) {
    int size = 5;
    for (int k = 1; k <= size; k++) {
        for (int i = (size+2); i > k; i--) {
            System.out.print(" ");
        }
        for (int j = 1; j <= k; j++) {
            System.out.print(" *");
        }
        System.out.println();
    }
}

Quite simply the number is the precision of the timestamp, the fraction of a second held in the column:

SQL> create table t23
  2  (ts0 timestamp(0)
  3   , ts3 timestamp(3)
  4  , ts6 timestamp(6)
  5  )
  6  /

Table created.

SQL> insert into t23 values (systimestamp, systimestamp, systimestamp)
  2  /

1 row created.

SQL> select * from t23
  2  /

TS0
---------------------------------------------------------------------------
TS3
---------------------------------------------------------------------------
TS6
---------------------------------------------------------------------------
24-JAN-12 05.57.12 AM
24-JAN-12 05.57.12.003 AM
24-JAN-12 05.57.12.002648 AM


SQL> 

If we don't specify a precision then the timestamp defaults to six places.

SQL> alter table t23 add ts_def timestamp;

Table altered.

SQL> update t23      
  2  set ts_def = systimestamp
  3  /

1 row updated.

SQL> select * from t23
  2  /

TS0
---------------------------------------------------------------------------
TS3
---------------------------------------------------------------------------
TS6
---------------------------------------------------------------------------
TS_DEF
---------------------------------------------------------------------------
24-JAN-12 05.57.12 AM
24-JAN-12 05.57.12.003 AM
24-JAN-12 05.57.12.002648 AM
24-JAN-12 05.59.27.293305 AM


SQL> 

Note that I'm running on Linux so my TIMESTAMP column actually gives me precision to six places i.e. microseconds. This would also be the case on most (all?) flavours of Unix. On Windows the limit is three places i.e. milliseconds. (Is this still true of the most modern flavours of Windows - citation needed).

As might be expected, the documentation covers this. Find out more.

"when you create timestamp(9) this gives you nanos right"

Only if the OS supports it. As you can see, my OEL appliance does not:

SQL> alter table t23 add ts_nano timestamp(9)
  2  /

Table altered.

SQL> update t23 set ts_nano = systimestamp(9)
  2  /

1 row updated.

SQL> select * from t23
  2  /

TS0
---------------------------------------------------------------------------
TS3
---------------------------------------------------------------------------
TS6
---------------------------------------------------------------------------
TS_DEF
---------------------------------------------------------------------------
TS_NANO
---------------------------------------------------------------------------
24-JAN-12 05.57.12 AM
24-JAN-12 05.57.12.003 AM
24-JAN-12 05.57.12.002648 AM
24-JAN-12 05.59.27.293305 AM
24-JAN-12 08.28.03.990557000 AM


SQL> 

(Those trailing zeroes could be a coincidence but they aren't.)

You must have an empty line in your file.

You may want to wrap your parseInt calls in a "try" block:

try {
  tall[i++] = Integer.parseInt(s);
}
catch (NumberFormatException ex) {
  continue;
}

Or simply check for empty strings before parsing:

if (s.length() == 0) 
  continue;

Note that by initializing your index variable i inside the loop, it is always 0. You should move the declaration before the while loop. (Or make it part of a for loop.)

I solved the problem in this way:

1. sudo pip install conda
2. pip install google

and no more error.

The === options give me duplicated columns. So I use Seq instead.

val Lead_all = Leads.join(Utm_Master,
    Seq("Utm_Source","Utm_Medium","Utm_Campaign"),"left")

Of course, this only works when the names of the joining columns are the same.

You can use inspect module to get full source code for that. You have to use getsource() method for that from the inspect module. For example:

import inspect

def get_my_code():
    x = "abcd"
    return x

print(inspect.getsource(get_my_code))

You can check it out more options on the below link. retrieve your python code

A friend function is not a member function, so the problem is that you declare operator<< as a friend of A:

 friend ostream& operator<<(ostream&, A&);

then try to define it as a member function of the class logic

 ostream& logic::operator<<(ostream& os, A& a)
          ^^^^^^^

Are you confused about whether logic is a class or a namespace?

The error is because you've tried to define a member operator<< taking two arguments, which means it takes three arguments including the implicit this parameter. The operator can only take two arguments, so that when you write a << b the two arguments are a and b.

You want to define ostream& operator<<(ostream&, const A&) as a non-member function, definitely not as a member of logic since it has nothing to do with that class!

std::ostream& operator<<(std::ostream& os, const A& a)
{
  return os << a.number;
}

Another way (credit):

@For /F "tokens=2,3,4 delims=/ " %%A in ('Date /t') do @( 
    Set Month=%%A
    Set Day=%%B
    Set Year=%%C
)

@echo DAY = %Day%
@echo Month = %Month%
@echo Year = %Year%

Note that both my answers here are still reliant on the order of the day and month as determined by regional settings - not sure how to work around that.

Some links i found:

• Forum thread for amazon tutorial request
• Amazon Web Services
• Some sort of script for using the amazon eCommerce API
• another tutorial for amazon web-store-y stuff
• Amazon and ebay e-commerce API tutorials

If multiple clock are generated with different frequencies, then clock generation can be simplified if a procedure is called as concurrent procedure call. The time resolution issue, mentioned by Martin Thompson, may be mitigated a little by using different high and low time in the procedure. The test bench with procedure for clock generation is:

library ieee;
use ieee.std_logic_1164.all;

entity tb is
end entity;

architecture sim of tb is

  -- Procedure for clock generation
  procedure clk_gen(signal clk : out std_logic; constant FREQ : real) is
    constant PERIOD    : time := 1 sec / FREQ;        -- Full period
    constant HIGH_TIME : time := PERIOD / 2;          -- High time
    constant LOW_TIME  : time := PERIOD - HIGH_TIME;  -- Low time; always >= HIGH_TIME
  begin
    -- Check the arguments
    assert (HIGH_TIME /= 0 fs) report "clk_plain: High time is zero; time resolution to large for frequency" severity FAILURE;
    -- Generate a clock cycle
    loop
      clk <= '1';
      wait for HIGH_TIME;
      clk <= '0';
      wait for LOW_TIME;
    end loop;
  end procedure;

  -- Clock frequency and signal
  signal clk_166 : std_logic;
  signal clk_125 : std_logic;

begin

  -- Clock generation with concurrent procedure call
  clk_gen(clk_166, 166.667E6);  -- 166.667 MHz clock
  clk_gen(clk_125, 125.000E6);  -- 125.000 MHz clock

  -- Time resolution show
  assert FALSE report "Time resolution: " & time'image(time'succ(0 fs)) severity NOTE;

end architecture;

The time resolution is printed on the terminal for information, using the concurrent assert last in the test bench.

If the clk_gen procedure is placed in a separate package, then reuse from test bench to test bench becomes straight forward.

Waveform for clocks are shown in figure below.

An more advanced clock generator can also be created in the procedure, which can adjust the period over time to match the requested frequency despite the limitation by time resolution. This is shown here:

-- Advanced procedure for clock generation, with period adjust to match frequency over time, and run control by signal
procedure clk_gen(signal clk : out std_logic; constant FREQ : real; PHASE : time := 0 fs; signal run : std_logic) is
  constant HIGH_TIME   : time := 0.5 sec / FREQ;  -- High time as fixed value
  variable low_time_v  : time;                    -- Low time calculated per cycle; always >= HIGH_TIME
  variable cycles_v    : real := 0.0;             -- Number of cycles
  variable freq_time_v : time := 0 fs;            -- Time used for generation of cycles
begin
  -- Check the arguments
  assert (HIGH_TIME /= 0 fs) report "clk_gen: High time is zero; time resolution to large for frequency" severity FAILURE;
  -- Initial phase shift
  clk <= '0';
  wait for PHASE;
  -- Generate cycles
  loop
    -- Only high pulse if run is '1' or 'H'
    if (run = '1') or (run = 'H') then
      clk <= run;
    end if;
    wait for HIGH_TIME;
    -- Low part of cycle
    clk <= '0';
    low_time_v := 1 sec * ((cycles_v + 1.0) / FREQ) - freq_time_v - HIGH_TIME;  -- + 1.0 for cycle after current
    wait for low_time_v;
    -- Cycle counter and time passed update
    cycles_v := cycles_v + 1.0;
    freq_time_v := freq_time_v + HIGH_TIME + low_time_v;
  end loop;
end procedure;

Again reuse through a package will be nice.

Won't running this in the background do it?

#!/bin/sh
while [ 1 ]; do
    echo "Hell yeah!" &
    sleep 15
done

This is about as efficient as it gets. The important part only gets executed every 15 seconds and the script sleeps the rest of the time (thus not wasting cycles).

I'm using the same approach, I suggest to write the singleton a little better:

public static MyApp getInstance() {

    if (instance == null) {
        synchronized (MyApp.class) {
            if (instance == null) {
                instance = new MyApp ();
            }
        }
    }

    return instance;
}

but I'm not using everywhere, I use getContext() and getApplicationContext() where I can do it!

Apparently now when you run a rolling-update with the --image argument the same as the existing container image, you must also specify an --image-pull-policy. The following command should force a pull of the image when it is the same as the container image:

kubectl rolling-update myapp --image=us.gcr.io/project-107012/myapp:5c3dda6b --image-pull-policy Always

After changing the parameter AllowOverride from None to All in /etc/apache2/apache2.conf (Debian 8), following this, the .htaccess file just must contain:

Options +MultiViews
AddHandler php5-script php
AddType text/html php

And it was enough to hide .php extension from files

SELECT FIELD FROM TABLE
ORDER BY 
  isnumeric(FIELD) desc, 
  CASE ISNUMERIC(test) 
    WHEN 1 THEN CAST(CAST(test AS MONEY) AS INT)
    ELSE NULL 
  END,
  FIELD

As per this link you need to cast to MONEY then INT to avoid ordering '$' as a number.

Use np.ravel (for a 1D view) or np.ndarray.flatten (for a 1D copy) or np.ndarray.flat (for an 1D iterator):

In [12]: a = np.array([[1,2,3], [4,5,6]])

In [13]: b = a.ravel()

In [14]: b
Out[14]: array([1, 2, 3, 4, 5, 6])

Note that ravel() returns a view of a when possible. So modifying b also modifies a. ravel() returns a view when the 1D elements are contiguous in memory, but would return a copy if, for example, a were made from slicing another array using a non-unit step size (e.g. a = x[::2]).

If you want a copy rather than a view, use

In [15]: c = a.flatten()

If you just want an iterator, use np.ndarray.flat:

In [20]: d = a.flat

In [21]: d
Out[21]: <numpy.flatiter object at 0x8ec2068>

In [22]: list(d)
Out[22]: [1, 2, 3, 4, 5, 6]

The stringr package provides the str_sub function, which is a bit easier to use than substr, especially if you want to extract right portions of your string :

R> str_sub("leftright",1,4)
[1] "left"
R> str_sub("leftright",-5,-1)
[1] "right"

Try executing below command,

java -help

It gives option as,

-version print product version and exit

java -version is the correct command to execute

Use .apply() to have the same access to arguments in function b, like this:

function a(){
    b.apply(null, arguments);
}
function b(){
   alert(arguments); //arguments[0] = 1, etc
}
a(1,2,3);?

You can test it out here.

get_the_post_thumbnail function returns html not url of featured image. You should use get_post_thumbnail_id to get post id of featured image and then use wp_get_attachment_image_src to get url of featured image.

Try this:

<?php
$args = array( 'post_type' => 'product', 'posts_per_page' => 80, 'product_cat' => 'profiler', 'orderby' => 'rand' );

$loop = new WP_Query( $args );
while ( $loop->have_posts() ) : $loop->the_post(); global $product; ?>
    <div class="dvThumb col-xs-4 col-sm-3 col-md-3 profiler-select profiler<?php echo the_title(); ?>" data-profile="<?php echo $loop->post->ID; ?>">
        <?php $featured_image = wp_get_attachment_image_src( get_post_thumbnail_id($loop->post->ID)); ?>
        <?php if($featured_image) { ?>
        <img src="<?php $featured_image[0]; ?>" data-id="<?php echo $loop->post->ID; ?>">
        <?php } ?>
        <p><?php the_title(); ?></p>
        <span class="price"><?php echo $product->get_price_html(); ?></span>
    </div>
<?php endwhile; ?>

Just found Light Bot. Program your robot to move around and perform tasks to complete a puzzle. Even includes subroutines. Program the bot by dragging tiles into slots. The game is very polished.

Update Lightbot is now the most recent version of the game, and has versions specifically designed for kids ages 4-8 or ages 9+ (with no upper limit) and also features kind of an if

screen of lightbot 1 http://www.lostateminor.com/wp-content/uploads/2008/10/light-bot.jpg

The AHK script is a great idea. Just for those interested I needed to change it a little bit to work for me:

SetTitleMatchMode,2         ;;; allows for a partial search 
#IfWinActive, .py           ;;; scope limiter to only python files
:b*:print ::print(){Left}   ;;; I forget what b* does
#IfWinActive                ;;; remove the scope limitation

I know it has been a while since this was asked, but I learned an alternative yesterday

We all know you can do:

if(o instanceof String) {   // etc

but what if you dont know exactly what type of class it needs to be? you cannot generically do:

if(o instanceof <Class variable>.getClass()) {   

as it gives a compile error.
Instead, here is an alternative - isAssignableFrom()

For example:

public static boolean isASubClass(Class classTypeWeWant, Object objectWeHave) {

    return classTypeWeWant.isAssignableFrom(objectWeHave.getClass())
}

Taken from the Java EE 6 SDK Installer, shows what SDK 6 contains besides JDK:

You can do this in a try and catch block:

try:
    if val is None:
        print("null")
except NameError:
    # throw an exception or do something else

Open .eclipseproduct in the product installation folder. Or open Configuration\config.ini and check property eclipse.buildId if exist.

you can simply pass the 2 commits to git diff like :

-> git diff 0da94be  59ff30c > my.patch
-> git apply my.patch

Python compiles the .py and saves files as .pyc so it can reference them in subsequent invocations.

There's no harm in deleting them, but they will save compilation time if you're doing lots of processing.

I got this warning by using Material UI components, then I test the component="div" as prop to the below code and everything became correct:

import Grid from '@material-ui/core/Grid';
import Typography from '@material-ui/core/Typography';

<Typography component="span">
  <Grid component="span">
    Lorem Ipsum
  </Grid>
</Typography>

Actually, this warning happens because in the Material UI the default HTML tag of Grid component is div tag and the default Typography HTML tag is p tag, So now the warning happens,

Warning: validateDOMnesting(...): <div> cannot appear as a descendant of <p>

I don't know where the hang comes from, but redirecting (or piping) commands into an interactive ssh is in general a recipe for problems. It is more robust to use the command-to-run-as-a-last-argument style and pass the script on the ssh command line:

ssh user@server 'DEP_ROOT="/home/matthewr/releases"
datestamp=$(date +%Y%m%d%H%M%S)
REL_DIR=$DEP_ROOT"/"$datestamp
if [ ! -d "$DEP_ROOT" ]; then
    echo "creating the root directory"
    mkdir $DEP_ROOT
fi
mkdir $REL_DIR'

(All in one giant '-delimited multiline command-line argument).

The pseudo-terminal message is because of your -t which asks ssh to try to make the environment it runs on the remote machine look like an actual terminal to the programs that run there. Your ssh client is refusing to do that because its own standard input is not a terminal, so it has no way to pass the special terminal APIs onwards from the remote machine to your actual terminal at the local end.

What were you trying to achieve with -t anyway?

Use the CONCAT function available in SQL Server 2012 onward.

SELECT CONCAT([FirstName], ' , ' , [LastName]) FROM YOURTABLE

You can easily restart your MySql service. This kicks the error off.

The destructor of A will run when its lifetime is over. If you want its memory to be freed and the destructor run, you have to delete it if it was allocated on the heap. If it was allocated on the stack this happens automatically (i.e. when it goes out of scope; see RAII). If it is a member of a class (not a pointer, but a full member), then this will happen when the containing object is destroyed.

class A
{
    char *someHeapMemory;
public:
    A() : someHeapMemory(new char[1000]) {}
    ~A() { delete[] someHeapMemory; }
};

class B
{
    A* APtr;
public:
    B() : APtr(new A()) {}
    ~B() { delete APtr; }
};

class C
{
    A Amember;
public:
    C() : Amember() {}
    ~C() {} // A is freed / destructed automatically.
};

int main()
{
    B* BPtr = new B();
    delete BPtr; // Calls ~B() which calls ~A() 
    C *CPtr = new C();
    delete CPtr;
    B b;
    C c;
} // b and c are freed/destructed automatically

In the above example, every delete and delete[] is needed. And no delete is needed (or indeed able to be used) where I did not use it.

auto_ptr, unique_ptr and shared_ptr etc... are great for making this lifetime management much easier:

class A
{
    shared_array<char> someHeapMemory;
public:
    A() : someHeapMemory(new char[1000]) {}
    ~A() { } // someHeapMemory is delete[]d automatically
};

class B
{
    shared_ptr<A> APtr;
public:
    B() : APtr(new A()) {}
    ~B() {  } // APtr is deleted automatically
};

int main()
{
    shared_ptr<B> BPtr = new B();
} // BPtr is deleted automatically

I'd refrain from using floats for this sort of thing; I'd rather use inline-block.

Some more points to consider:

• Inline styles are bad for maintainability
• You shouldn't have spaces in selector names
• You missed some important HTML tags, like <head> and <body>
• You didn't include a doctype

Here's a better way to format your document:

<!DOCTYPE html>
<html>
<head>
<title>Website Title</title>
<style type="text/css">
* {margin: 0; padding: 0;}
#container {height: 100%; width:100%; font-size: 0;}
#left, #middle, #right {display: inline-block; *display: inline; zoom: 1; vertical-align: top; font-size: 12px;}
#left {width: 25%; background: blue;}
#middle {width: 50%; background: green;}
#right {width: 25%; background: yellow;}
</style>
</head>
<body>
<div id="container">
    <div id="left">Left Side Menu</div>
    <div id="middle">Random Content</div>
    <div id="right">Right Side Menu</div>
</div>
</body>
</html>

Here's a jsFiddle for good measure.

You can use a property setter to raise an event whenever the value of a field is going to change.

You can have your own EventHandler delegate or you can use the famous System.EventHandler delegate.

Usually there's a pattern for this:

1. Define a public event with an event handler delegate (that has an argument of type EventArgs).
2. Define a protected virtual method called OnXXXXX (OnMyPropertyValueChanged for example). In this method you should check if the event handler delegate is null and if not you can call it (it means that there are one or more methods attached to the event delegation).
3. Call this protected method whenever you want to notify subscribers that something has changed.

Here's an example

private int _age;

//#1
public event System.EventHandler AgeChanged;

//#2
protected virtual void OnAgeChanged()
{ 
     if (AgeChanged != null) AgeChanged(this,EventArgs.Empty); 
}

public int Age
{
    get
    {
         return _age;
    }

    set
    {
         //#3
         _age=value;
         OnAgeChanged();
    }
 }

The advantage of this approach is that you let any other classes that want to inherit from your class to change the behavior if necessary.

If you want to catch an event in a different thread that it's being raised you must be careful not to change the state of objects that are defined in another thread which will cause a cross thread exception to be thrown. To avoid this you can either use an Invoke method on the object that you want to change its state to make sure that the change is happening in the same thread that the event has been raised or in case that you are dealing with a Windows Form you can use a BackgourndWorker to do things in a parallel thread nice and easy.

aView.frame = CGRectMake(100, 200, aView.frame.size.width, aView.frame.size.height);

Use:

import os
print os.sep

to see how separator looks on a current OS.
In your code you can use:

import os
path = os.path.join('folder_name', 'file_name')

Your solution is nearly correct. You could add DISTINCT:

SELECT
    people.pe_name,
    COUNT(distinct orders.ord_id) AS num_orders,
    COUNT(items.item_id) AS num_items
FROM
    people
    INNER JOIN orders ON (orders.pe_id = people.pe_id)
    INNER JOIN items ON items.pe_id = people.pe_id
GROUP BY
    people.pe_id;

If you're using Rails 3+, remove the gem from the Gemfile and run bundle install.

If you're using Rails 2, hopefully you've put the declaration in config/environment.rb. If so, removing it from there and running rake gems:install should do the trick.

Note that :

typeof $(this) is JQuery object.

and

typeof $(this)[0] is HTMLElement object

then : if you want to apply .val() on HTMLElement , you can add this extension .

HTMLElement.prototype.val=function(v){
   if(typeof v!=='undefined'){this.value=v;return this;}
   else{return this.value}
}

Then :

document.getElementById('myDiv').val() ==== $('#myDiv').val()

And

 document.getElementById('myDiv').val('newVal') ==== $('#myDiv').val('newVal')

????? INVERSE :

Conversely? if you want to add value property to jQuery object , follow those steps :

1. Download the full source code (not minified) i.e: example http://code.jquery.com/jquery-1.11.1.js .

2. Insert Line after L96 , add this code value:"" to init this new prop

3. Search on jQuery.fn.init , it will be almost Line 2747

4. Now , assign a value to value prop : (Before return statment add this.value=jQuery(selector).val())

Enjoy now : $('#myDiv').value

May be following is better to avoid the if statement:

global.logger || (global.logger = require('my_logger'));

Use Map to remove the duplicates. (For new readers)

var standardsList = [
    {"Grade": "Math K", "Domain": "Counting & Cardinality"},
    {"Grade": "Math K", "Domain": "Counting & Cardinality"},
    {"Grade": "Math K", "Domain": "Counting & Cardinality"},
    {"Grade": "Math K", "Domain": "Counting & Cardinality"},
    {"Grade": "Math K", "Domain": "Geometry"},
    {"Grade": "Math 1", "Domain": "Counting & Cardinality"},
    {"Grade": "Math 1", "Domain": "Counting & Cardinality"},
    {"Grade": "Math 1", "Domain": "Orders of Operation"},
    {"Grade": "Math 2", "Domain": "Geometry"},
    {"Grade": "Math 2", "Domain": "Geometry"}
];

var grades = new Map();
standardsList.forEach( function( item ) {
    grades.set(JSON.stringify(item), item);
});

console.log( [...grades.values()]);

/*
[
  { Grade: 'Math K', Domain: 'Counting & Cardinality' },
  { Grade: 'Math K', Domain: 'Geometry' },
  { Grade: 'Math 1', Domain: 'Counting & Cardinality' },
  { Grade: 'Math 1', Domain: 'Orders of Operation' },
  { Grade: 'Math 2', Domain: 'Geometry' }
]
*/

enable -n echo
echo -n "Some string..."

html code in my case

<ul class="navs">
   <li  id="tab1"><a href="index-2.html">home</a></li>
   <li id="tab2"><a href="about.html">about</a></li>

   <li id="tab3"><a href="project-02.html">Products</a></li>

   <li id="tab4"><a href="contact.html">contact</a></li>
 </ul>

and js code is

  $('.navs li a').click(function (e) {
        var $parent = $(this).parent();
        document.cookie = eraseCookie("tab");
        document.cookie = createCookie("tab", $parent.attr('id'),0);
 });

    $().ready(function () {
        var $activeTab = readCookie("tab");
        if (!$activeTab =="") {
        $('#tab1').removeClass('ActiveTab');
          }
       // alert($activeTab.toString());

        $('#'+$activeTab).addClass('active');
    });

function createCookie(name, value, days) {
    if (days) {
        var date = new Date();
        date.setTime(date.getTime() + (days * 24 * 60 * 60 * 1000));
        var expires = "; expires=" + date.toGMTString();
    }
    else var expires = "";

    document.cookie = name + "=" + value + expires + "; path=/";
}

function readCookie(name) {
    var nameEQ = name + "=";
    var ca = document.cookie.split(';');
    for (var i = 0; i < ca.length; i++) {
        var c = ca[i];
        while (c.charAt(0) == ' ') c = c.substring(1, c.length);
        if (c.indexOf(nameEQ) == 0) return c.substring(nameEQ.length, c.length);
    }
    return null;
}

function eraseCookie(name) {
    createCookie(name, "", -1);
}

In my case (macos, curl 7.54.0), I have below proxy set with ~/.bash_profile

$ env |grep -i proxy |cut -d = -f1|sort
FTP_PROXY
HTTPS_PROXY
HTTP_PROXY
NO_PROXY
PROXY
ftp_proxy
http_proxy
https_proxy
no_proxy

With unknown reason, this version of curl can't work with environment variables NO_PRXY and no_proxy properly, then I unset the proxy environment variables one by one, until to both HTTPS_PROXY and https_proxy.

unset HTTPS_PROXY
unset https_proxy

it starts working and can connect to internal urls

So I would recommend to unset all proxy variables if you have in your environment as temporary solution.

unset http_proxy https_proxy HTTP_PROXY HTTPS_PROXY

In case anyone is still looking for Helvetica Neue Condensed Bold, you essentially have two options.

1. fonts.com: License the real font as a webfont from fonts.com. Free (with a badge), $10/month for 250k pageviews and $100/month for 2.5M pageviews. You can download the font to your desktop with the most expensive plan (but if you're on a Mac you already have it).
2. myfonts.com / fontspring.com: Buy a pretty close alternative like Nimbus Sans Novus D from MyFont ($160 for unlimited pageviews), or Franklin Gothic FS Demi Condensed, from fontspring.com (about $21.95, flat one time fee with unlimited pageviews). In both cases you also get to download the font for your desktop so you can use it in Photoshop for comps.

A very cheap compromise is to buy Franklin from fontspring and then use "HelveticaNeue-CondensedBold" as the preferred font in your CSS.

h2 {"HelveticaNeue-CondensedBold", "FranklinGothicFSDemiCondensed", Arial, sans-serif;}

Then if a Mac user loads your site they see Helvetica Neue, but if they're on another platform they see Franklin.

UPDATE: I discovered a much closer match to Helvetica Neue Condensed Bold is Nimbus Sans Novus D Condensed bold. In fact, it is also derived from Helvetica. You can get it at MyFonts.com for $20 (desktop) and $20 (web, 10k pageviews). Web with unlimited pageviews is $160. I have used this font throughout (i.e. NOT exploiting the Mac's built in "NimbusSansNovusDBoldCondensed" at all) because it leads to a design that is more uniform across browsers. Built in HN and Nimbus Sans are very similar in all respects but point size. Nimbus needs a few extra points to get an identical size match.

you can use directly (blur) event in input tag.

<div>
   <input [value] = "" (blur) = "result = $event.target.value" placeholder="Type Something">
   {{result}}
</div>

and you will get output in "result"

This works for MVC 5:

<a href="@Url.Action("ActionName", "ControllerName", new { paramName1 = item.paramValue1, paramName2 = item.paramValue2 })" >
    Link text
</a>

As explained here by Filip - http://www.filipekberg.se/2011/10/02/adding-properties-and-methods-to-an-expandoobject-dynamicly/

You can add a method too at runtime.

x.Add("Shout", new Action(() => { Console.WriteLine("Hellooo!!!"); }));
x.Shout();

In my company, we write software for the Avionics and Defense market, and we always include a default statement, because ALL cases in a switch statement must be explicitly handled (even if it is just a comment saying 'Do nothing'). We cannot afford the software just to misbehave or simply crash on unexpected (or even what we think impossible) values.

It can be discussed that a default case is not always necessary, but by always requiring it, it is easily checked by our code analyzers.

The following code works fine for me, using the StreamReader class:

  using (var reader = new StreamReader(fileName, defaultEncodingIfNoBom, true))
  {
      reader.Peek(); // you need this!
      var encoding = reader.CurrentEncoding;
  }

The trick is to use the Peek call, otherwise, .NET has not done anything (and it hasn't read the preamble, the BOM). Of course, if you use any other ReadXXX call before checking the encoding, it works too.

If the file has no BOM, then the defaultEncodingIfNoBom encoding will be used. There is also a StreamReader without this overload method (in this case, the Default (ANSI) encoding will be used as defaultEncodingIfNoBom), but I recommand to define what you consider the default encoding in your context.

I have tested this successfully with files with BOM for UTF8, UTF16/Unicode (LE & BE) and UTF32 (LE & BE). It does not work for UTF7.

Assuming that pwd is just an example, this is how you can do it:

import subprocess

p = subprocess.Popen("pwd", stdout=subprocess.PIPE)
result = p.communicate()[0]
print result

See the subprocess documentation for another example and more information.

BYTE* is probably a typedef for unsigned char*, but I can't say for sure. It would help if you tell us what BYTE is.

If BYTE* is unsigned char*, you can convert it to an std::string using the std::string range constructor, which will take two generic Iterators.

const BYTE* str1 = reinterpret_cast<const BYTE*> ("Hello World");
int len = strlen(reinterpret_cast<const char*>(str1));
std::string str2(str1, str1 + len);

That being said, are you sure this is a good idea? If BYTE is unsigned char it may contain non-ASCII characters, which can include NULLs. This will make strlen give an incorrect length.

Check your code behind file name and Inherits property on the @Page directive, make sure they both match.

The simplest method is:

int[] ints = new [] { 10, 20, 10, 34, 113 };

List<int> lst = ints.ToList();

or

List<int> lst = new List<int>();
lst.AddRange(ints);

sudo mv /filename /etc/init.d/
sudo chmod +x /etc/init.d/filename 
sudo update-rc.d filename defaults 

Script should now start on boot. Note that this method also works with both hard links and symbolic links (ln).

Edit

At this point in the boot process PATH isn't set yet, so it is critical that absolute paths are used throughout. BUT, as pointed out in the comments by Steve HHH, explicitly declaring the full file path (/etc/init.d/filename) for the update-rc.d command is not valid in most versions of Linux. Per the manpage for update-rc.d, the second parameter is a script located in /etc/init.d/*. Updated above code to reflect this.

Another Edit

Also as pointed out in the comments (by Charles Brandt), /filename must be an init style script. A good template was also provided - https://github.com/fhd/init-script-template.

Another link to another article just to avoid possible link rot (although it would be saddening if GitHub died) - http://www.linux.com/learn/tutorials/442412-managing-linux-daemons-with-init-scripts

yetAnother Edit

As pointed out in the comments (by Russell Yan), This works only on default mode of update-rc.d.

According to manual of update-rc.d, it can run on two modes, "the machines using the legacy mode will have a file /etc/init.d/.legacy-bootordering", in which case you have to pass sequence and runlevel configuration through command line arguments.

The equivalent argument set for the above example is

sudo update-rc.d filename start 20 2 3 4 5 . stop 20 0 1 6 .

Form approach

As scoota269 says, you should use onSubmit instead, cause pressing enter on a textbox will most likey trigger a form submit (if inside a form)

<form action="#" onsubmit="handle">
    <input type="text" name="txt" />
</form>

<script>
    function handle(e){
        e.preventDefault(); // Otherwise the form will be submitted

        alert("FORM WAS SUBMITTED");
    }
</script>

Textbox approach

If you want to have an event on the input-field then you need to make sure your handle() will return false, otherwise the form will get submitted.

<form action="#">
    <input type="text" name="txt" onkeypress="handle(event)" />
</form>

<script>
    function handle(e){
        if(e.keyCode === 13){
            e.preventDefault(); // Ensure it is only this code that runs

            alert("Enter was pressed was presses");
        }
    }
</script>

Hope this will help some how in your case, I suffered with the exact same problem, and just used localstorage to share the data between parent window and iframe. So in parent window you can:

localStorage.setItem("url", myUrl);

And in code where iframe source is just get this data from localstorage:

localStorage.getItem('url');

Saved me a lot of time. As far as i can see the only condition is access to the parent page code. Hope this will help someone.

arrayList.toArray(new Custom[0]);

http://download.oracle.com/javase/7/docs/api/java/util/ArrayList.html#toArray%28java.lang.Object[]%29

Dirk has explained how to plot the density function over the histogram. But sometimes you might want to go with the stronger assumption of a skewed normal distribution and plot that instead of density. You can estimate the parameters of the distribution and plot it using the sn package:

> sn.mle(y=c(rep(65, times=5), rep(25, times=5), rep(35, times=10), rep(45, times=4)))
$call
sn.mle(y = c(rep(65, times = 5), rep(25, times = 5), rep(35, 
    times = 10), rep(45, times = 4)))

$cp
    mean     s.d. skewness 
41.46228 12.47892  0.99527 

This probably works better on data that is more skew-normal:

 <div class='block1'>
    <p  style="float:left">text</p>
    <div class='block2' style="float:right">block2</div>
    <p  style="float:left; clear:left">text2</p>

 </div>

You can clear:both or clear:left depending on the exact context. Also, you will have to play around with width to get it to work correctly...

This could be useful

class func createAttributedStringFrom (string1 : String ,strin2 : String, attributes1 : Dictionary<String, NSObject>, attributes2 : Dictionary<String, NSObject>) -> NSAttributedString{

let fullStringNormal = (string1 + strin2) as NSString
let attributedFullString = NSMutableAttributedString(string: fullStringNormal as String)

attributedFullString.addAttributes(attributes1, range: fullStringNormal.rangeOfString(string1))
attributedFullString.addAttributes(attributes2, range: fullStringNormal.rangeOfString(strin2))
return attributedFullString
}

Just use which sounds better. I'd use the first approach, though, because it seems to have fewer operations.

has_key has been deprecated in Python 3.0. Alternatively you can use 'in'

graph={'A':['B','C'],
   'B':['C','D']}

print('A' in graph)
>> True

print('E' in graph)
>> False

Consider the Switch Function as an alternative to multiple IIf() expressions. It will return the value from the first expression/value pair where the expression evaluates as True, and ignore any remaining pairs. The concept is similar to the SELECT ... CASE approach you referenced but which is not available in Access SQL.

If you want to display a calculated field as commission:

SELECT
    Switch(
        OpeningBalance < 5001, 20,
        OpeningBalance < 10001, 30,
        OpeningBalance < 20001, 40,
        OpeningBalance >= 20001, 50
        ) AS commission
FROM YourTable;

If you want to store that calculated value to a field named commission:

UPDATE YourTable
SET commission =
    Switch(
        OpeningBalance < 5001, 20,
        OpeningBalance < 10001, 30,
        OpeningBalance < 20001, 40,
        OpeningBalance >= 20001, 50
        );

Either way, see whether you find Switch() easier to understand and manage. Multiple IIf()s can become mind-boggling as the number of conditions grows.

I'm not sure how they're functionally different. My current batch of OS X browsers don't show any difference.

I would assume they are all functionally the same due to legacy HTML attribute handling. Back in the day, any flag (Boolean) attribute need only be present, sans value, eg

<input readonly>
<option selected>

When XHTML came along, this syntax wasn't valid and values were required. Whilst the W3 specified using the attribute name as the value, I'm guessing most browser vendors decided to simply check for attribute existence.

If your using a new version of larval 7 >= you can use from your homested directory vagrant provision

give your boxes the class foo (or whatever) and add the css

.foo{
    float: left;
}

AssertionError is an Unchecked Exception which rises explicitly by programmer or by API Developer to indicate that assert statement fails.

assert(x>10);

Output:

AssertionError

If x is not greater than 10 then you will get runtime exception saying AssertionError.

Try this code.

XSSFWorkbook workbook = new XSSFWorkbook(new File(result));
    XSSFSheet sheet = workbook.getSheetAt(0);

    // Iterate through each rows one by one
    Iterator<Row> rowIterator = sheet.iterator();
    while (rowIterator.hasNext()) {
        Row row = rowIterator.next();
        // For each row, iterate through all the columns
        Iterator<Cell> cellIterator = row.cellIterator();

        while (cellIterator.hasNext()) {
            Cell cell = cellIterator.next();
            switch (cell.getCellType()) {
            case Cell.CELL_TYPE_NUMERIC:
                if (cell.getNumericCellValue() != 0) {
                    //Get date
                    Date date = row.getCell(0).getDateCellValue();



                    //Get datetime
                    cell.getDateCellValue()


                    System.out.println(date.getTime());
                }
                break;
            }
        }
    }

Hope is help.

Color.parseColor("#rrggbb")

instead of #rrggbb you should be using hex values 0 to F for rr, gg and bb:

e.g. Color.parseColor("#000000") or Color.parseColor("#FFFFFF")

Source

From documentation:

public static int parseColor (String colorString):

Parse the color string, and return the corresponding color-int. If the string cannot be parsed, throws an IllegalArgumentException exception. Supported formats are: #RRGGBB #AARRGGBB 'red', 'blue', 'green', 'black', 'white', 'gray', 'cyan', 'magenta', 'yellow', 'lightgray', 'darkgray', 'grey', 'lightgrey', 'darkgrey', 'aqua', 'fuschia', 'lime', 'maroon', 'navy', 'olive', 'purple', 'silver', 'teal'

So I believe that if you are using #rrggbb you are getting IllegalArgumentException in your logcat

Source

Alternative:

Color mColor = new Color();
mColor.red(redvalue);
mColor.green(greenvalue);
mColor.blue(bluevalue);
li.setBackgroundColor(mColor);

Source

Just came here to share what was happening to me.
You don't need to specify the parent, states work in an document oriented way so, instead of specifying parent: app, you could just change the state to app.index

.config(function($stateProvider, $urlRouterProvider){
    $urlRouterProvider.otherwise("/index.html");

$stateProvider.state('app', {
  abstract: true,
  templateUrl: "tpl.menu.html"
});

$stateProvider.state('app.index', {
    url: '/',
    templateUrl: "tpl.index.html"
});

$stateProvider.state('app.register', {
    url: "/register",
    templateUrl: "tpl.register.html"
});

EDIT Warning, if you want to go deep in the nesting, the full path must me specified. For example, you can't have a state like

app.cruds.posts.create

without having a

app
app.cruds
app.cruds.posts

or angular will throw an exception saying it can't figure out the rout. To solve that you can define abstract states

.state('app', {
     url: "/app",
     abstract: true
})
.state('app.cruds', {
     url: "/app/cruds",
     abstract: true
})
.state('app/cruds/posts', {
     url: "/app/cruds/posts",
     abstract: true
})

SELECT column1 FROM table WHERE column1 not like '%[0-9]%'

Removing the '^' did it for me. I'm looking at a varchar field and when I included the ^ it excluded all of my non-numerics which is exactly what I didn't want. So, by removing ^ I only got non-numeric values back.

the answers suggesting to use cast, FYI, the cast method in spark 1.4.1 is broken.

for example, a dataframe with a string column having value "8182175552014127960" when casted to bigint has value "8182175552014128100"

    df.show
+-------------------+
|                  a|
+-------------------+
|8182175552014127960|
+-------------------+

    df.selectExpr("cast(a as bigint) a").show
+-------------------+
|                  a|
+-------------------+
|8182175552014128100|
+-------------------+

We had to face a lot of issue before finding this bug because we had bigint columns in production.

If you are interested in only selecting one column this will work.

df[["item1"]].to_dict("records")

The below will NOT work and produces a TypeError: unsupported type: . I believe this is because it is trying to convert a series to a dict and not a Data Frame to a dict.

df["item1"].to_dict("records")

I had a requirement to only select one column and convert it to a list of dicts with the column name as the key and was stuck on this for a bit so figured I'd share.

I know this is a late entry but I have created a simple upload directive. Which you can get working in no time!

<input type="file" multiple ng-simple-upload web-api-url="/api/post"
       callback-fn="myCallback" />

ng-simple-upload more on Github with an example using Web API.

foreach (new DirectoryIterator('/path/to/directory') as $fileInfo) {
    if(!$fileInfo->isDot()) {
        unlink($fileInfo->getPathname());
    }
}

OK, when you clone your repo, you have all branches there...

If you just do git branch, they are kind of hidden...

So if you'd like to see all branches name, just simply add --all flag like this:

git branch --all or git branch -a

If you just checkout to the branch, you get all you need.

But how about if the branch created by someone else after you clone?

In this case, just do:

git fetch

and check all branches again...

If you like to fetch and checkout at the same time, you can do:

git fetch && git checkout your_branch_name

Also created the image below for you to simplify what I said:

I hope this will be even more elegant way of doing it.

a = [1,2,3,4,5,6]
zip(a[::2], a[1::2])

[(1, 2), (3, 4), (5, 6)]

A fixed point number just means that there are a fixed number of digits after the decimal point. A floating point number allows for a varying number of digits after the decimal point.

For example, if you have a way of storing numbers that requires exactly four digits after the decimal point, then it is fixed point. Without that restriction it is floating point.

Often, when fixed point is used, the programmer actually uses an integer and then makes the assumption that some of the digits are beyond the decimal point. For example, I might want to keep two digits of precision, so a value of 100 means actually means 1.00, 101 means 1.01, 12345 means 123.45, etc.

Floating point numbers are more general purpose because they can represent very small or very large numbers in the same way, but there is a small penalty in having to have extra storage for where the decimal place goes.

I solved it upgrading the lxml version with:

pip install --upgrade lxml

In Chrome, go to options (Customize and Control, the 3 dots/bars at top right) ---> More Tools ---> save page as

save page as  
filename     : any_name.html 
save as type : webpage complete.

Then you will get any_name.html and any_name folder.

$blue_keys = array_search("blue", array_keys($a));

http://php.net/manual/en/function.array-keys.php

Isn't it Simple as this,

txtbox1.BorderColor = System.Drawing.Color.Red;

Not having a compiler by me right now, I'll answer by asking a question:

Have you tried this? Does it work?

long key = -1L;
PreparedStatement statement = connection.prepareStatement();
statement.executeUpdate(YOUR_SQL_HERE, PreparedStatement.RETURN_GENERATED_KEYS);
ResultSet rs = statement.getGeneratedKeys();
if (rs != null && rs.next()) {
    key = rs.getLong(1);
}

Disclaimer: Obviously, I haven't compiled this, but you get the idea.

PreparedStatement is a subinterface of Statement, so I don't see a reason why this wouldn't work, unless some JDBC drivers are buggy.

CSS Flexbox is well supported these days. Go here for a good tutorial on flexbox.

This works fine in all newer browsers:

#container {_x000D_
  display:         flex;_x000D_
  flex-wrap:       wrap;_x000D_
  justify-content: center;_x000D_
}_x000D_
_x000D_
.block {_x000D_
  width:              150px;_x000D_
  height:             150px;_x000D_
  background-color:   #cccccc;_x000D_
  margin:             10px;        _x000D_
}

<div id="container">_x000D_
  <div class="block">1</div>    _x000D_
  <div class="block">2</div>    _x000D_
  <div class="block">3</div>    _x000D_
  <div class="block">4</div>    _x000D_
  <div class="block">5</div>        _x000D_
</div>

Some may ask why not use display: inline-block? For simple things it is fine, but if you got complex code within the blocks, the layout may not be correctly centered anymore. Flexbox is more stable than float left.

The best source of information is the official Python tutorial on list comprehensions. List comprehensions are nearly the same as for loops (certainly any list comprehension can be written as a for-loop) but they are often faster than using a for loop.

Look at this longer list comprehension from the tutorial (the if part filters the comprehension, only parts that pass the if statement are passed into the final part of the list comprehension (here (x,y)):

>>> [(x, y) for x in [1,2,3] for y in [3,1,4] if x != y]
[(1, 3), (1, 4), (2, 3), (2, 1), (2, 4), (3, 1), (3, 4)]

It's exactly the same as this nested for loop (and, as the tutorial says, note how the order of for and if are the same).

>>> combs = []
>>> for x in [1,2,3]:
...     for y in [3,1,4]:
...         if x != y:
...             combs.append((x, y))
...
>>> combs
[(1, 3), (1, 4), (2, 3), (2, 1), (2, 4), (3, 1), (3, 4)]

The major difference between a list comprehension and a for loop is that the final part of the for loop (where you do something) comes at the beginning rather than at the end.

On to your questions:

What type must object be in order to use this for loop structure?

An iterable. Any object that can generate a (finite) set of elements. These include any container, lists, sets, generators, etc.

What is the order in which i and j are assigned to elements in object?

They are assigned in exactly the same order as they are generated from each list, as if they were in a nested for loop (for your first comprehension you'd get 1 element for i, then every value from j, 2nd element into i, then every value from j, etc.)

Can it be simulated by a different for loop structure?

Yes, already shown above.

Can this for loop be nested with a similar or different structure for loop? And how would it look?

Sure, but it's not a great idea. Here, for example, gives you a list of lists of characters:

[[ch for ch in word] for word in ("apple", "banana", "pear", "the", "hello")]

I know the question is about Macs, but I got here searching the answer for Ubuntu, so I guess my answer could be useful to someone.

Easy way to do it: AltF3.

How about a list?

mystring.split(",")

It might help if you could explain what kind of info we are looking at. Maybe some background info also?

EDIT:

I had a thought you might want the info in groups of two?

then try:

re.split(r"\d*,\d*", mystring)

and also if you want them into tuples

[(pair[0], pair[1]) for match in re.split(r"\d*,\d*", mystring) for pair in match.split(",")]

in a more readable form:

mylist = []
for match in re.split(r"\d*,\d*", mystring):
    for pair in match.split(",")
        mylist.append((pair[0], pair[1]))

The other answers are right. Assuming your examples reflect the full range of possibilities what you want is DECIMAL(3, 1). Or, DECIMAL(14, 1) will allow a total of 14 digits. It's your job to think about what's enough.

ok very simple first go to 1. res-valuse and open colors.xml 2.copy 1 of the defined text their for example #FF4081 and change name for instance i changed to white and change its value for instance i changed to #FFFFFF for white value like this

<color name="White">#FFFFFF</color>

then inside your button add this line

 b3.setTextColor(ContextCompat.getColor(getApplicationContext(), R.color.White));

ok b3 is the name of my button so changed of the name of ur button all others will be same if u use white color if you change different color then change white to the name of your color but first you have define that color in colors.xml like i explained in pont 2

This solution meets the following criteria

1. Percentage width is allowed on parent
2. Works after window resize
3. Content underneath header is never inaccessible

As far as I'm aware, this criteria cannot be met without Javascript (unfortunately).

This solution uses jQuery, but could also be easily converted to vanilla JS:

function fixedHeader(){_x000D_
  $(this).width($("#wrapper").width());_x000D_
  $("#header-filler").height($("#header-fixed").outerHeight());_x000D_
}_x000D_
_x000D_
$(window).resize(function() {_x000D_
  fixedHeader();_x000D_
});_x000D_
_x000D_
fixedHeader();

#header-fixed{_x000D_
  position: fixed;_x000D_
  background-color: white;_x000D_
  top: 0;_x000D_
}_x000D_
#header-filler{_x000D_
  width: 100%;_x000D_
}

<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>_x000D_
<div id="wrapper">_x000D_
<div id="header-fixed">_x000D_
  This is a nifty header! works even when resizing the window causing a line break_x000D_
</div>_x000D_
<div id="header-filler"></div>_x000D_
_x000D_
[start fluff]<br>_x000D_
a<br>a<br>a<br>a<br>a<br>a<br>a<br>a<br>a<br>a<br>_x000D_
a<br>a<br>a<br>a<br>a<br>a<br>a<br>a<br>a<br>a<br>_x000D_
a<br>a<br>a<br>a<br>a<br>a<br>a<br>a<br>a<br>a<br>_x000D_
[end fluff]_x000D_
_x000D_
</div>

You can also do it this way to reference the previous branch implicitly:

git checkout mainline
git pull
git merge -
git push

For me it worked using flexbox, which is in my opinion the cleanest solution.

Add a css class around the parent div / element with :

.parent {
display: flex;
}

and for the button use:

.button {
justify-content: center;
}

You should use a parent div, otherwise the button doesn't 'know' what the middle of the page / element is.

If this is not working, try :

#wrapper {
    display:flex;
    justify-content: center;
}

If you want to cut the whitespaces before and behind the word, but keep the middle ones.
You could use:

word = '  Hello World  '
stripped = word.strip()
print(stripped)

Use regex.test() if all you want is a boolean result:

console.log(/^([a-z0-9]{5,})$/.test('abc1')); // false_x000D_
_x000D_
console.log(/^([a-z0-9]{5,})$/.test('abc12')); // true_x000D_
_x000D_
console.log(/^([a-z0-9]{5,})$/.test('abc123')); // true

...and you could remove the () from your regexp since you've no need for a capture.

Following the documentation of fopen:

``a'' Open for writing. The file is created if it does not exist. The stream is positioned at the end of the file. Subsequent writes to the file will always end up at the then cur- rent end of file, irrespective of any intervening fseek(3) or similar.

So if you pFile2=fopen("myfile2.txt", "a"); the stream is positioned at the end to append automatically. just do:

FILE *pFile;
FILE *pFile2;
char buffer[256];

pFile=fopen("myfile.txt", "r");
pFile2=fopen("myfile2.txt", "a");
if(pFile==NULL) {
    perror("Error opening file.");
}
else {
    while(fgets(buffer, sizeof(buffer), pFile)) {
        fprintf(pFile2, "%s", buffer);
    }
}
fclose(pFile);
fclose(pFile2);

For those that still have problems, you have to download the language file your want from here:

https://github.com/jquery/jquery-ui/tree/master/ui/i18n

and then include it in your page like this for example(italian language):

<script type="text/javascript" src="/scripts/jquery.ui.datepicker-it.js"></script>

then use zilverdistel's code :D

Try this, You have to call both methods to reload view, as this one works for me,

-Objective-C

[self viewDidLoad]; 
[self viewWillAppear:YES];

-Swift

self.viewDidLoad()
self.viewWillAppear(true)

On Fedora 22, you need to do this instead:

sudo dnf install python-devel
sudo dnf install openldap-devel

I want share my experience. A few days ago I have to update 21 million records in table with 76 million records. My colleague suggested the next variant. For example, we have the next table 'Persons':

Id | FirstName | LastName | Email            | JobTitle
1  | John      |  Doe     | [email protected]     | Software Developer
2  | John1     |  Doe1    | [email protected]     | Software Developer
3  | John2     |  Doe2    | [email protected]     | Web Designer

Task: Update persons to the new Job Title: 'Software Developer' -> 'Web Developer'.

1. Create Temporary Table 'Persons_SoftwareDeveloper_To_WebDeveloper (Id INT Primary Key)'

2. Select into temporary table persons which you want to update with the new Job Title:

INSERT INTO Persons_SoftwareDeveloper_To_WebDeveloper SELECT Id FROM
Persons WITH(NOLOCK) --avoid lock 
WHERE JobTitle = 'Software Developer' 
OPTION(MAXDOP 1) -- use only one core

Depends on rows count, this statement will take some time to fill your temporary table, but it would avoid locks. In my situation it took about 5 minutes (21 million rows).

3. The main idea is to generate micro sql statements to update database. So, let's print them:

DECLARE @i INT, @pagesize INT, @totalPersons INT
    SET @i=0
    SET @pagesize=2000
    SELECT @totalPersons = MAX(Id) FROM Persons

    while @i<= @totalPersons
    begin
    Print '
    UPDATE persons 
      SET persons.JobTitle = ''ASP.NET Developer''
      FROM  Persons_SoftwareDeveloper_To_WebDeveloper tmp
      JOIN Persons persons ON tmp.Id = persons.Id
      where persons.Id between '+cast(@i as varchar(20)) +' and '+cast(@i+@pagesize as varchar(20)) +' 
        PRINT ''Page ' + cast((@i / @pageSize) as varchar(20))  + ' of ' + cast(@totalPersons/@pageSize as varchar(20))+'
     GO
     '
     set @i=@i+@pagesize
    end

After executing this script you will receive hundreds of batches which you can execute in one tab of MS SQL Management Studio.

4. Run printed sql statements and check for locks on table. You always can stop process and play with @pageSize to speed up or speed down updating(don't forget to change @i after you pause script).

5. Drop Persons_SoftwareDeveloper_To_AspNetDeveloper. Remove temporary table.

Minor Note: This migration could take a time and new rows with invalid data could be inserted during migration. So, firstly fix places where your rows adds. In my situation I fixed UI, 'Software Developer' -> 'Web Developer'.

That will only work for small numbers and I'm guessing it's also implementation-dependent. Python uses the same object instance for small numbers (iirc <256), but this changes for bigger numbers.

>>> a = 2104214124
>>> b = 2104214124
>>> a == b
True
>>> a is b
False

So you should always use == to compare numbers.

C# solution:

    public int solution(int[] A)
    {
        int result = 1;

        // write your code in Java SE 8
        foreach(int num in A)
        {
            if (num == result)
               result++;

            while (A.Contains(result))
                result++;
        }

        return result;
    }

The error occur mainly becuase the array isnt found. Just check if you have mapped to the correct array. Check the array name or declaration.

In JavaScript this always refers to the “owner” of the function we're executing, or rather, to the object that a function is a method of. When we define our faithful function doSomething() in a page, its owner is the page, or rather, the window object (or global object) of JavaScript.

How does the "this" keyword work?

string.IsNullOrEmpty(Request.QueryString["aspxerrorpath"]) //true -> there is no value

Will return if there is a value

for a simple csv one map() and a join() are enough:

var csv = test_array.map(function(d){
    return d.join();
}).join('\n');

/* Results in 
name1,2,3
name2,4,5
name3,6,7
name4,8,9
name5,10,11

This method also allows you to specify column separator other than a comma in the inner join. for example a tab: d.join('\t')

On the other hand if you want to do it properly and enclose strings in quotes "", then you can use some JSON magic:

var csv = test_array.map(function(d){
   return JSON.stringify(d);
})
.join('\n') 
.replace(/(^\[)|(\]$)/mg, ''); // remove opening [ and closing ] brackets from each line 

/* would produce
"name1",2,3
"name2",4,5
"name3",6,7
"name4",8,9
"name5",10,11

if you have array of objects like :

var data = [
  {"title": "Book title 1", "author": "Name1 Surname1"},
  {"title": "Book title 2", "author": "Name2 Surname2"},
  {"title": "Book title 3", "author": "Name3 Surname3"},
  {"title": "Book title 4", "author": "Name4 Surname4"}
];

// use
var csv = data.map(function(d){
    return JSON.stringify(Object.values(d));
})
.join('\n') 
.replace(/(^\[)|(\]$)/mg, '');

You need to set the scope of the dependency to 'provided' in your POM.

http://maven.apache.org/guides/introduction/introduction-to-dependency-mechanism.html#Dependency_Scope

<dependency>  
  <groupId>javax.servlet</groupId>
  <artifactId>servlet-api</artifactId>
  <version>2.4</version>
  <scope>provided</scope>
</dependency>

Then everything will be fine.

the mime type might not be text/csv some systems can read/save them different. (for example sometimes IE sends .csv files as application/vnd.ms-excel) so you best bet would be to build an array of allowed values and test against that, then find all possible values to test against.

$mimes = array('application/vnd.ms-excel','text/plain','text/csv','text/tsv');
if(in_array($_FILES['file']['type'],$mimes)){
  // do something
} else {
  die("Sorry, mime type not allowed");
}

if you wished you could add a further check if mime is returned as text/plain you could run a preg_match to make sure it has enough commas in it to be a csv.

try doing:

<?xml version="1.0" encoding="utf-8"?>
<android.support.v7.widget.CardView xmlns:android="http://schemas.android.com/apk/res/android"
    android:layout_width="fill_parent"
    android:layout_height="wrap_content"
    xmlns:card_view="http://schemas.android.com/apk/res-auto"
    card_view:cardElevation="2dp"
    card_view:cardCornerRadius="5dp">

    <FrameLayout
        android:background="#FF0000"
        android:layout_width="4dp"
        android:layout_height="match_parent"/>

    <LinearLayout
        android:layout_width="fill_parent"
        android:layout_height="wrap_content"
        android:padding="16dp"
        android:orientation="vertical">

        <TextView
            style="@style/Base.TextAppearance.AppCompat.Headline"
            android:layout_width="fill_parent"
            android:layout_height="wrap_content"
            android:text="Title" />

        <TextView
            style="@style/Base.TextAppearance.AppCompat.Body1"
            android:layout_width="fill_parent"
            android:layout_height="wrap_content"
            android:text="Content here" />

    </LinearLayout>

</android.support.v7.widget.CardView>

this removes the padding from the cardview and adds a FrameLayout with a color. You then need to fix the padding in the LinearLayout then for the other fields

Update

If you want to preserve the card corner radius create card_edge.xml in drawable folder:

<?xml version="1.0" encoding="utf-8"?>
<shape xmlns:android="http://schemas.android.com/apk/res/android" >
    <solid android:color="#F00" />
    <size android:width="10dp"/>
    <padding android:bottom="0dp" android:left="0dp" android:right="0dp" android:top="0dp"/>
    <corners android:topLeftRadius="5dp" android:bottomLeftRadius="5dp"
        android:topRightRadius="0.1dp" android:bottomRightRadius="0.1dp"/>
</shape>

and in the frame layout use android:background="@drawable/card_edge"

If you're fetching a single item only then, you need use select before your FirstOrDefault()/SingleOrDefault(). And you can use anonymous object of the required properties.

var name = dbContext.MyTable.Select(x => new { x.UserId, x.Name }).FirstOrDefault(x => x.UserId == 1)?.Name;

Above query will be converted to this:

Select Top (1) UserId, Name from MyTable where UserId = 1;

For multiple items you can simply chain Select after Where:

var names = dbContext.MyTable.Where(x => x.UserId > 10).Select(x => x.Name);

Use anonymous object inside Select if you need more than one properties.

I use jadeclipse instead, because it can't work in 3.6/3.7 eclipse

Update site http://webobjects.mdimension.com/jadclipse/3.6/

Intallation http://5thcross.wordpress.com/2009/05/20/installing-jadclipse-in-eclipse/

The previous version, xlrd 1.2.0, may appear to work, but it could also expose you to potential security vulnerabilities. With that warning out of the way, if you still want to give it a go, type the following command:

pip install xlrd==1.2.0

// import
function get_difference(pre, mou) {
  return {
    x: mou.x - pre.x,
    y: mou.y - pre.y
  };
}

/*
if your panel is in a nested environment, which the parent container's width and height does not equa to document width 
and height, for example, in an element `canvas`, then edit it to

function oMousePos(e) {
  var rc = canvas.getBoundingClientRect();
  return {
    x: e.clientX - rc.left,
    y: e.clientY - rc.top,
  };
}
*/

function oMousePos(e) {
  return {
    x: e.clientX,
    y: e.clientY,
  };
}

function render_element(styles, el) {
  for (const [kk, vv] of Object.entries(styles)) {
    el.style[kk] = vv;
  }
}

class MoveablePanel {

  /*
  prevent an element from moving out of window
  */
  constructor(container, draggable, left, top) {
    this.container = container;
    this.draggable = draggable;
    this.left = left;
    this.top = top;
    let rect = container.getBoundingClientRect();
    this.width = rect.width;
    this.height = rect.height;
    this.status = false;

    // initial position of the panel, should not be changed
    this.original = {
      left: left,
      top: top
    };

    // current left and top postion
    // {this.left, this.top}

    // assign the panel to initial position
    // initalize in registration
    this.default();

    if (!MoveablePanel._instance) {
      MoveablePanel._instance = [];
    }
    MoveablePanel._instance.push(this);
  }

  mousedown(e) {
    this.status = true;
    this.previous = oMousePos(e)
  }

  mousemove(e) {
    if (!this.status) {
      return;
    }
    let pos = oMousePos(e);
    let vleft = this.left + pos.x - this.previous.x;
    let vtop = this.top + pos.y - this.previous.y;
    let kleft, ktop;

    if (vleft < 0) {
      kleft = 0;
    } else if (vleft > window.innerWidth - this.width) {
      kleft = window.innerWidth - this.width;
    } else {
      kleft = vleft;
    }

    if (vtop < 0) {
      ktop = 0;
    } else if (vtop > window.innerHeight - this.height) {
      ktop = window.innerHeight - this.height;
    } else {
      ktop = vtop;
    }
    this.container.style.left = `${kleft}px`;
    this.container.style.top = `${ktop}px`;
  }

  /*
  sometimes user move the cursor too fast which mouseleave is previous than mouseup
  to prevent moving too fast and break the control, mouseleave is handled the same as mouseup
  */

  mouseupleave(e) {
    if (!this.status) {
      return null;
    }
    this.status = false;
    let pos = oMousePos(e);
    let vleft = this.left + pos.x - this.previous.x;
    let vtop = this.top + pos.y - this.previous.y;

    if (vleft < 0) {
      this.left = 0;
    } else if (vleft > window.innerWidth - this.width) {
      this.left = window.innerWidth - this.width;
    } else {
      this.left = vleft;
    }

    if (vtop < 0) {
      this.top = 0;
    } else if (vtop > window.innerHeight - this.height) {
      this.top = window.innerHeight - this.height;
    } else {
      this.top = vtop;
    }

    this.show();
    return true;
  }

  default () {
    this.container.style.left = `${this.original.left}px`;
    this.container.style.top = `${this.original.top}px`;
  }

  /*
  panel with a higher z index will interupt drawing
  therefore if panel is not displaying, set it with a lower z index that canvas

  change index doesn't work, if panel is hiding, then we move it out
  hide: record current position, move panel out
  show: assign to recorded position

  notice this position has nothing to do panel drag movement
  they cannot share the same variable
  */

  hide() {
    // move to the right bottom conner
    this.container.style.left = `${window.screen.width}px`;
    this.container.style.top = `${window.screen.height}px`;
  }

  show() {
    this.container.style.left = `${this.left}px`;
    this.container.style.top = `${this.top}px`;
  }
}
// end of import

class DotButton{
    constructor(
        width_px, 
        styles, // mainly pos, padding and margin, e.g. {top: 0, left: 0, margin: 0},
        color, 
        color_hover,
        border, // boolean
        border_dismiss, // boolean: dismiss border when hover
    ){
        this.width = width_px;
        this.styles = styles;
        this.color = color;
        this.color_hover = color_hover;
        this.border = border;
        this.border_dismiss = border_dismiss;
    }

    create(_styles=null){
        var el = document.createElement('div');
        Object.keys(this.styles).forEach(kk=>{
            el.style[kk] = `${this.styles[kk]}px`;
        });
        if(_styles){
            Object.keys(_styles).forEach(kk=>{
                el.style[kk] = `${this.styles[kk]}px`;
            });
        }
        el.style.width = `${this.width}px`
        el.style.height = `${this.width}px`
        el.style.position = 'absolute';
        el.style.left = `${this.left_px}px`;
        el.style.top = `${this.top_px}px`;
        el.style.background = this.color;
        if(this.border){
            el.style.border = '1px solid'; 
        }
        el.style.borderRadius = `${this.width}px`;

        el.addEventListener('mouseenter', ()=>{
            el.style.background = this.color_hover;
            if(this.border_dismiss){
                el.style.border = `1px solid ${this.color_hover}`; 
            }
        });
        el.addEventListener('mouseleave', ()=>{
            el.style.background = this.color;
            if(this.border_dismiss){
                el.style.border = '1px solid'; 
            }
        });
        return el;
    }
}

function cursor_hover(el, default_cursor, to_cursor){
    el.addEventListener('mouseenter', function(){
        this.style.cursor = to_cursor;
    }.bind(el));


    el.addEventListener('mouseleave', function(){
        this.style.cursor = default_cursor;
    }.bind(el));
}

class FlexPanel extends MoveablePanel{
    constructor(
        parent_el,
        top_px,
        left_px,
        width_px, 
        height_px, 
        background,
        handle_width_px, 
        coner_vmin_ratio, 
        button_width_px, 
        button_margin_px, 
    ){
        super(
            (()=>{
                var el = document.createElement('div');
                render_element(
                    {
                        position: 'fixed', 
                        top: `${top_px}px`,
                        left: `${left_px}px`,
                        width: `${width_px}px`,
                        height: `${height_px}px`,
                        background: background, 
                    }, 
                    el,
                );
                return el;
            })(), // iife returns a container (panel el)
            new DotButton(button_width_px, {top: 0, right: 0, margin: button_margin_px}, 'green', 'lightgreen', false, false).create(), // draggable
            left_px, // left
            top_px, // top
        );

        this.draggable.addEventListener('mousedown', e => {
            e.preventDefault();
            this.mousedown(e);
        });

        this.draggable.addEventListener('mousemove', e => {
            e.preventDefault();
            this.mousemove(e);
        });

        this.draggable.addEventListener('mouseup', e => {
            e.preventDefault();
            this.mouseupleave(e);
        });

        this.draggable.addEventListener('mouseleave', e => {
            e.preventDefault();
            this.mouseupleave(e);
        });

        this.parent_el = parent_el;
        this.background = background;

        // parent
        this.width = width_px;
        this.height = height_px;

        this.handle_width_px = handle_width_px;
        this.coner_vmin_ratio = coner_vmin_ratio;

        this.panel_el = document.createElement('div');

        // styles that won't change 
        this.panel_el.style.position = 'absolute';
        this.panel_el.style.top = `${this.handle_width_px}px`;
        this.panel_el.style.left = `${this.handle_width_px}px`; 
        this.panel_el.style.background = this.background;
    
        this.handles = [
            this.handle_top,
            this.handle_left,
            this.handle_bottom,
            this.handle_right, 

            this.handle_lefttop,
            this.handle_topleft,
            this.handle_topright,
            this.handle_righttop, 
            this.handle_rightbottom, 
            this.handle_bottomright,
            this.handle_bottomleft,
            this.handle_leftbottom, 
        ] = Array.from({length: 12}, i => document.createElement('div'));

        this.handles.forEach(el=>{
            el.style.position = 'absolute';
        });

        this.handle_topleft.style.top = '0';
        this.handle_topleft.style.left = `${this.handle_width_px}px`;

        this.handle_righttop.style.right = '0';
        this.handle_righttop.style.top = `${this.handle_width_px}px`;

        this.handle_bottomright.style.bottom = '0';
        this.handle_bottomright.style.right = `${this.handle_width_px}px`;

        this.handle_leftbottom.style.left = '0';
        this.handle_leftbottom.style.bottom = `${this.handle_width_px}px`;


        this.handle_lefttop.style.left = '0';
        this.handle_lefttop.style.top = '0';

        this.handle_topright.style.top = '0';
        this.handle_topright.style.right = '0';

        this.handle_rightbottom.style.right = '0';
        this.handle_rightbottom.style.bottom = '0';

        this.handle_bottomleft.style.bottom = '0';
        this.handle_bottomleft.style.left = '0';

        this.update_ratio();

        [
            'ns-resize', // |
            'ew-resize', // -
            'ns-resize', // |
            'ew-resize', // -

            'nwse-resize', // \
            'nwse-resize', // \
            'nesw-resize', // /
            'nesw-resize', // /
            'nwse-resize', // \
            'nwse-resize', // \
            'nesw-resize', // /
            'nesw-resize', // /
        ].map((dd, ii)=>{
            cursor_hover(this.handles[ii], 'default', dd);
        });

        this.vtop = this.top;
        this.vleft = this.left;
        this.vwidth = this.width;
        this.vheight = this.height;

        this.update_ratio();

        this.handles.forEach(el=>{
            this.container.appendChild(el);
        });

        cursor_hover(this.draggable, 'default', 'move');

        this.panel_el.appendChild(this.draggable);
        this.container.appendChild(this.panel_el);
        this.parent_el.appendChild(this.container);

        [
            this.edgemousedown, 
            this.verticalmousemove,
            this.horizontalmousemove,
            this.nwsemousemove,
            this.neswmousemove,
            this.edgemouseupleave,
        ] = [
            this.edgemousedown.bind(this),
            this.verticalmousemove.bind(this),
            this.horizontalmousemove.bind(this),
            this.nwsemousemove.bind(this),
            this.neswmousemove.bind(this),
            this.edgemouseupleave.bind(this),
        ];

        this.handle_top.addEventListener('mousedown', e=>{this.edgemousedown(e, 'top')});
        this.handle_left.addEventListener('mousedown', e=>{this.edgemousedown(e, 'left')});
        this.handle_bottom.addEventListener('mousedown', e=>{this.edgemousedown(e, 'bottom')});
        this.handle_right.addEventListener('mousedown', e=>{this.edgemousedown(e, 'right')}); 
        this.handle_lefttop.addEventListener('mousedown', e=>{this.edgemousedown(e, 'lefttop')});
        this.handle_topleft.addEventListener('mousedown', e=>{this.edgemousedown(e, 'topleft')});
        this.handle_topright.addEventListener('mousedown', e=>{this.edgemousedown(e, 'topright')});
        this.handle_righttop.addEventListener('mousedown', e=>{this.edgemousedown(e, 'righttop')}); 
        this.handle_rightbottom.addEventListener('mousedown', e=>{this.edgemousedown(e, 'rightbottom')}); 
        this.handle_bottomright.addEventListener('mousedown', e=>{this.edgemousedown(e, 'bottomright')});
        this.handle_bottomleft.addEventListener('mousedown', e=>{this.edgemousedown(e, 'bottomleft')});
        this.handle_leftbottom.addEventListener('mousedown', e=>{this.edgemousedown(e, 'leftbottom')});

        this.handle_top.addEventListener('mousemove', this.verticalmousemove);
        this.handle_left.addEventListener('mousemove', this.horizontalmousemove);
        this.handle_bottom.addEventListener('mousemove', this.verticalmousemove);
        this.handle_right.addEventListener('mousemove', this.horizontalmousemove); 
        this.handle_lefttop.addEventListener('mousemove', this.nwsemousemove);
        this.handle_topleft.addEventListener('mousemove', this.nwsemousemove);
        this.handle_topright.addEventListener('mousemove', this.neswmousemove);
        this.handle_righttop.addEventListener('mousemove', this.neswmousemove); 
        this.handle_rightbottom.addEventListener('mousemove', this.nwsemousemove); 
        this.handle_bottomright.addEventListener('mousemove', this.nwsemousemove);
        this.handle_bottomleft.addEventListener('mousemove', this.neswmousemove);
        this.handle_leftbottom.addEventListener('mousemove', this.neswmousemove);

        this.handle_top.addEventListener('mouseup', e=>{this.verticalmousemove(e); this.edgemouseupleave()});
        this.handle_left.addEventListener('mouseup', e=>{this.horizontalmousemove(e); this.edgemouseupleave()});
        this.handle_bottom.addEventListener('mouseup', e=>{this.verticalmousemove(e); this.edgemouseupleave()});
        this.handle_right.addEventListener('mouseup', e=>{this.horizontalmousemove(e); this.edgemouseupleave()}); 
        this.handle_lefttop.addEventListener('mouseup', e=>{this.nwsemousemove(e); this.edgemouseupleave()});
        this.handle_topleft.addEventListener('mouseup', e=>{this.nwsemousemove(e); this.edgemouseupleave()});
        this.handle_topright.addEventListener('mouseup', e=>{this.neswmousemove(e); this.edgemouseupleave()});
        this.handle_righttop.addEventListener('mouseup', e=>{this.neswmousemove(e); this.edgemouseupleave()}); 
        this.handle_rightbottom.addEventListener('mouseup', e=>{this.nwsemousemove(e); this.edgemouseupleave()}); 
        this.handle_bottomright.addEventListener('mouseup', e=>{this.nwsemousemove(e); this.edgemouseupleave()});
        this.handle_bottomleft.addEventListener('mouseup', e=>{this.neswmousemove(e); this.edgemouseupleave()});
        this.handle_leftbottom.addEventListener('mouseup', e=>{this.neswmousemove(e); this.edgemouseupleave()});
    
        this.handle_top.addEventListener('mouseleave', this.edgemouseupleave);
        this.handle_left.addEventListener('mouseleave', this.edgemouseupleave);
        this.handle_bottom.addEventListener('mouseleave', this.edgemouseupleave);
        this.handle_right.addEventListener('mouseleave', this.edgemouseupleave);
        this.handle_lefttop.addEventListener('mouseleave', this.edgemouseupleave);
        this.handle_topleft.addEventListener('mouseleave', this.edgemouseupleave);
        this.handle_topright.addEventListener('mouseleave', this.edgemouseupleave);
        this.handle_righttop.addEventListener('mouseleave', this.edgemouseupleave);
        this.handle_rightbottom.addEventListener('mouseleave', this.edgemouseupleave);
        this.handle_bottomright.addEventListener('mouseleave', this.edgemouseupleave);
        this.handle_bottomleft.addEventListener('mouseleave', this.edgemouseupleave);
        this.handle_leftbottom.addEventListener('mouseleave', this.edgemouseupleave);
    }

    // box size change triggers corner handler size change
    update_ratio(){
        this.container.style.top = `${this.vtop}px`;
        this.container.style.left = `${this.vleft}px`;
        this.container.style.width = `${this.vwidth}px`;
        this.container.style.height = `${this.vheight}px`;

        this.panel_el.style.width = `${this.vwidth - 2 * this.handle_width_px}px`;
        this.panel_el.style.height = `${this.vheight - 2 * this.handle_width_px}px`;

        this.ratio = this.vwidth < this.vheight ? this.coner_vmin_ratio * this.vwidth : this.coner_vmin_ratio * this.vheight;
        [
            this.handle_top,
            this.handle_bottom, 
        ].forEach(el=>{
            el.style.width = `${this.vwidth - 2 * this.ratio}px`;
            el.style.height = `${this.handle_width_px}px`;
        });

        [
            this.handle_left,
            this.handle_right, 
        ].forEach(el=>{
            el.style.height = `${this.vheight - 2 * this.ratio}px`;
            el.style.width = `${this.handle_width_px}px`;
        });

        this.handle_top.style.top = `0`;
        this.handle_top.style.left = `${this.ratio}px`;

        this.handle_left.style.top = `${this.ratio}px`;
        this.handle_left.style.left = `0`;

        this.handle_bottom.style.bottom = `0`;
        this.handle_bottom.style.right = `${this.ratio}px`;

        this.handle_right.style.bottom = `${this.ratio}px`;
        this.handle_right.style.right = `0`;

        [
            this.handle_topright,
            this.handle_bottomleft,
        ].forEach(el=>{
            el.style.width = `${this.ratio}px`;
            el.style.height = `${this.handle_width_px}px`;
        });

        [
            this.handle_lefttop,
            this.handle_rightbottom,
        ].forEach(el=>{
            el.style.width = `${this.handle_width_px}px`;
            el.style.height = `${this.ratio}px`;
        });

        [
            this.handle_topleft,
            this.handle_bottomright,
        ].forEach(el=>{
            el.style.width = `${this.ratio - this.handle_width_px}px`;
            el.style.height = `${this.handle_width_px}px`;
        });

        [
            this.handle_righttop,
            this.handle_leftbottom,
        ].forEach(el=>{
            el.style.height = `${this.handle_width_px}px`;
            el.style.width = `${this.ratio - this.handle_width_px}px`;
        });
    }

    edgemousedown(e, flag){
        this.previous = oMousePos(e);
        this.flag = flag;
        this.drag = true;
    }

    verticalmousemove(e){
        if(this.drag){
            // -
            this.mouse = oMousePos(e);
            var ydif = this.mouse.y - this.previous.y;
            switch(this.flag){
                case 'top':
                    this.vtop = this.top + ydif;
                    this.vheight = this.height - ydif;

                    this.vleft = this.left;
                    this.vwidth = this.width;
                break;

                case 'bottom':
                    this.vheight = this.height + ydif;

                    this.vtop = this.top;
                    this.vleft = this.left;
                    this.vwidth = this.width;
                break;
            }
            this.update_ratio();
        }
    }

    horizontalmousemove(e){
        if(this.drag){
            // |
            this.mouse = oMousePos(e);
            var xdif = this.mouse.x - this.previous.x;
            switch(this.flag){
                case 'left':
                    this.vleft = this.left + xdif;
                    this.vwidth = this.width - xdif;

                    this.vtop = this.top;
                    this.vheight = this.height;
                break;

                case 'right':
                    this.vwidth = this.width + xdif;
                
                    this.vtop = this.top;
                    this.vleft = this.left;
                    this.vheight = this.height;
                break;
            }
            this.update_ratio();
        }
    }

    nwsemousemove(e){
        if(this.drag){
            // \
            this.mouse = oMousePos(e);
            var ydif = this.mouse.y - this.previous.y;
            var xdif = this.mouse.x - this.previous.x;
            switch(this.flag){
                case 'topleft':
                    this.vleft = this.left + xdif;
                    this.vtop = this.top + ydif;
                    this.vwidth = this.width - xdif;
                    this.vheight = this.height - ydif;
                break;

                case 'lefttop':
                    this.vleft = this.left + xdif;
                    this.vtop = this.top + ydif;
                    this.vwidth = this.width - xdif;
                    this.vheight = this.height - ydif;
                break;

                case 'bottomright':
                    this.vwidth = this.width + xdif;
                    this.vheight = this.height + ydif;

                    this.vtop = this.top;
                    this.vleft = this.left;
                break;

                case 'rightbottom':
                    this.vwidth = this.width + xdif;
                    this.vheight = this.height + ydif;

                    this.vtop = this.top;
                    this.vleft = this.left;
                break;
            }
            this.update_ratio();
        }
    }

    neswmousemove(e){
        if(this.drag){
            // /
            this.mouse = oMousePos(e);
            var ydif = this.mouse.y - this.previous.y;
            var xdif = this.mouse.x - this.previous.x;
            switch(this.flag){
                case 'topright':
                    this.vtop = this.top + ydif;
                    this.vwidth = this.width + xdif;
                    this.vheight = this.height - ydif;

                    this.vleft = this.left;
                break;

                case 'righttop':
                    this.vtop = this.top + ydif;
                    this.vwidth = this.width + xdif;
                    this.vheight = this.height - ydif;

                    this.vleft = this.left;
                break;

                case 'bottomleft':
                    this.vleft = this.left + xdif;
                    this.vwidth = this.width - xdif;
                    this.vheight = this.height + ydif;

                    this.vtop = this.top;
                break;

                case 'leftbottom':
                    this.vleft = this.left + xdif;
                    this.vwidth = this.width - xdif;
                    this.vheight = this.height + ydif;

                    this.vtop = this.top;
                break;
            }
            this.update_ratio();
        }
    }

    edgemouseupleave(){
        this.drag = false;
        this.top = this.vtop;
        this.left = this.vleft;
        this.width = this.vwidth;
        this.height = this.vheight;
    }

    mouseupleave(e){
        if(super.mouseupleave(e)){
            this.vtop = this.top;
            this.vleft = this.left;         
        }
    }
}


var fp = new FlexPanel(
    document.body, // parent div container
    20, // top margin
    20, // left margin
    200, // width 
    150, // height
    'lightgrey', // background
    20, // handle height when horizontal; handle width when vertical
    0.2, // edge up and left resize bar width : top resize bar width = 1 : 5
    35, // green move button width and height
    2, // button margin
);

/*
this method creates an element for you
which you don't need to pass in a selected element

to manipuate dom element
fp.container -> entire panel
fp.panel_el -> inside panel
*/

Achieving functionalities fully requires a lot of hard coding. Please refer to the documentation, it will show you how to use each class as element.

Many times I have been facing this problem, I have experienced ClassNotFoundException. if jar is not at physical location.

So make sure .jar file(mysql connector) in the physical location of WEB-INF lib folder. and make sure restarting Tomcat by using shutdown command in cmd. it should work.

Nc is a link to nmap-ncat.

It would be nice to use nmap-ncat in your puppet, because NC is a virtual name of nmap-ncat.

Puppet cannot understand the links/virtualnames

your puppet should be:

package {
  'nmap-ncat':
    ensure => installed;
}

Microsoft SQL Server 2005 Express Edition Service Pack 4 on Windows Server 2012 R2

Those steps are based on previous howto from https://stackoverflow.com/users/2385/eduardo-molteni

1. download SQLEXPR.EXE
2. run SQLEXPR.EXE
3. copy c:\generated_installation_dir to inst.bak
4. quit install
5. run inst.bak/setuip/sqlncli_x64.msi
6. run SQLEXPR.EXE
7. enjoy!

This works with Microsoft SQL Server 2005 Express Edition Service Pack 4 http://www.microsoft.com/en-us/download/details.aspx?id=184

You do not need to throw a checked exception. This is a bug within the control of the program, so you want to throw an unchecked exception. Use one of the unchecked exceptions already provided by the Java language, such as IllegalArgumentException, IllegalStateException or NullPointerException.

You may also want to get rid of the setter. You've already provided a way to initiate age through the constructor. Does it need to be updated once instantiated? If not, skip the setter. A good rule, do not make things more public than necessary. Start with private or default, and secure your data with final. Now everyone knows that Person has been constructed properly, and is immutable. It can be used with confidence.

Most likely this is what you really need:

class Person { 

  private final int age;   

  Person(int age) {    

    if (age < 0) 
       throw new IllegalArgumentException("age less than zero: " + age); 

    this.age = age;   
  }

  // setter removed

An important feature of a linked list (which I didn't read in another answer) is the concatenation of two lists. With an array this is O(n) (+ overhead of some reallocations) with a linked list this is only O(1) or O(2) ;-)

Important: For Java its LinkedList this is not true! See Is there a fast concat method for linked list in Java?

I faced the same problem,Eclipse splash screen for a second and it disappears.Then i noticed due to auto update of java there are two java version installed in my system. when i uninstalled one eclipse started working.

Thanks you..

Usually (in oop at least) you shape your object to behave the way you want. name in USERNAMES is not case insensitive, so USERNAMES needs to change:

class NameList(object):
    def __init__(self, names):
        self.names = names

    def __contains__(self, name): # implements `in`
        return name.lower() in (n.lower() for n in self.names)

    def add(self, name):
        self.names.append(name)

# now this works
usernames = NameList(USERNAMES)
print someone in usernames

The great thing about this is that it opens the path for many improvements, without having to change any code outside the class. For example, you could change the self.names to a set for faster lookups, or compute the (n.lower() for n in self.names) only once and store it on the class and so on ...

1. Go to phpinfo(), press ctrl+f, and type thread to check the value.
2. If it is enabled download the non thread safe version, otherwise download the thread safe version from here (zip).
3. Extract it, and rename the folder to php.
4. Go to your xampp folder rename the default php folder to something else.
5. Copy the extracted (renamed php) folder in xampp directory.
6. Copy the php.ini file from default/old php folder (That you renamed) and paste it into the new php folder.
7. Restart xampp server and you're good to go.

 showbookimage.setOnClickListener(new View.OnClickListener() {
            @Override
            public void onClick(View v) {

                // create intent with ACTION_IMAGE_CAPTURE action
                Intent intent = new Intent(MediaStore.ACTION_IMAGE_CAPTURE);
                /**
 Here REQUEST_IMAGE is the unique integer value you can pass it any integer
 **/
                // start camera activity
                startActivityForResult(intent, TAKE_PICTURE);
            }

            }

        );

then u can now give the image a file name as follows and then convert it into bitmap and later on to file

 private void createImageFile(Bitmap bitmap) throws IOException {
        // Create an image file name
        ByteArrayOutputStream bytes = new ByteArrayOutputStream();
        bitmap.compress(Bitmap.CompressFormat.JPEG, 40, bytes);
        String timeStamp = new SimpleDateFormat("yyyyMMdd_HHmmss").format(new Date());
        String imageFileName = "JPEG_" + timeStamp + "_";
        File storageDir = Environment.getExternalStoragePublicDirectory(
                Environment.DIRECTORY_PICTURES);
        File image = File.createTempFile(
                imageFileName,  /* prefix */
                ".jpg",         /* suffix */
                storageDir      /* directory */
        );
        FileOutputStream stream = new FileOutputStream(image);
        stream.write(bytes.toByteArray());
        stream.close();
        // Save a file: path for use with ACTION_VIEW intents
        mCurrentPhotoPath = "file:" + image.getAbsolutePath();
        fileUri = image.getAbsolutePath();
        Picasso.with(getActivity()).load(image).into(showbookimage);
    }
    @Override
    public void onActivityResult(int requestCode, int resultCode, Intent intent) {

        if (requestCode == TAKE_PICTURE && resultCode== Activity.RESULT_OK && intent != null){
            // get bundle
            Bundle extras = intent.getExtras();
            // get
            bitMap = (Bitmap) extras.get("data");
//            showbookimage.setImageBitmap(bitMap);
            try {
                createImageFile(bitMap);
            } catch (IOException e) {
                e.printStackTrace();
            }

        }
    }

use picasso for images to display rather fast

I don't think you can tell with the std::string class. However, if you really need this information, you could always derive a class from std::string and give the derived class the ability to tell if it had been changed since construction (or some other arbitrary time). Or better yet, just write a new class that wraps std::string since deriving from std::string may not be a good idea given the lack of a base class virtual destructor. That's probably more work, but more work tends to be needed for an optimal solution.

Of course, you can always just assume if it contains something other than "" then it has been "set", this won't detect it manually getting set to "" though.

Process Hacker has numerous ways of killing a process.

(Right-click the process, then go to Miscellaneous->Terminator.)

F7 F8 F9 for debugging

A better and optimised solution to display multiple validation messages for a single element would be like this.

<div ng-messages="myForm.file.$error" ng-show="myForm.file.$touched">
 <span class="error" ng-message="required"> <your message> </span>
 <span class="error" ng-message="size"> <your message> </span>
 <span class="error" ng-message="filetype"> <your message> </span>
</div>

Controller Code should be the one suggested by @ Ben Lesh

Use the special bash variable "$?" like so:

function_output=$(my_function)
function_return_value=$?

tail -f /path/to/glassfish/domains/YOURDOMAIN/logs/server.log

You can also upload log from admin console : http://yoururl:4848

The answer by @AKX works on the command line, but not within a batch file. Within a batch file, you need an extra %, like this:

@echo off
for /R TutorialSteps %%F in (*.py) do echo %%~nF

An alternative if you sometimes do not have spaces do not want to use the CASE statement

select REVERSE(RIGHT(REVERSE(YourColumn), LEN(YourColumn) - CHARINDEX(' ', REVERSE(YourColumn))))

This works in SQL Server, and according to my searching MySQL has the same functions

If you work with large vectors (size > 100,000) and want to delete lots of elements, I would recommend to do something like this:

int main(int argc, char** argv) {

    vector <int> vec;
    vector <int> vec2;

    for (int i = 0; i < 20000000; i++){
        vec.push_back(i);}

    for (int i = 0; i < vec.size(); i++)
    {
        if(vec.at(i) %3 != 0)
            vec2.push_back(i);
    }

    vec = vec2;
    cout << vec.size() << endl;
}

The code takes every number in vec that can't be divided by 3 and copies it to vec2. Afterwards it copies vec2 in vec. It is pretty fast. To process 20,000,000 elements this algorithm only takes 0.8 sec!

I did the same thing with the erase-method, and it takes lots and lots of time:

Erase-Version (10k elements)  : 0.04 sec
Erase-Version (100k elements) : 0.6  sec
Erase-Version (1000k elements): 56   sec
Erase-Version (10000k elements): ...still calculating (>30 min)

This answer is an update with a little more consideration for OOM and various other leaks.

Assumes you have a directory intended as the destination and a name String already defined.

    File destination = new File(directory.getPath() + File.separatorChar + filename);

    ByteArrayOutputStream bytes = new ByteArrayOutputStream();
    source.compress(Bitmap.CompressFormat.PNG, 100, bytes);

    FileOutputStream fo = null;
    try {
        destination.createNewFile();

        fo = new FileOutputStream(destination);
        fo.write(bytes.toByteArray());
    } catch (IOException e) {

    } finally {
        try {
            fo.close();
        } catch (IOException e) {}
    }

In my case, the file ~/.curlrc had a wrong proxy configured.