There is no way to delete or read the past history.

You could try going around it by emulating history in your own memory and calling history.pushState everytime window popstate event is emitted (which is proposed by the currently accepted Mike's answer), but it has a lot of disadvantages that will result in even worse UX than not supporting the browser history at all in your dynamic web app, because:

• popstate event can happen when user goes back ~2-3 states to the past
• popstate event can happen when user goes forward

So even if you try going around it by building virtual history, it's very likely that it can also lead into a situation where you have blank history states (to which going back/forward does nothing), or where that going back/forward skips some of your history states totally.

No,that would be a security issue.

window.location.replace('pageName.html');

similar behavior as an HTTP redirect

Read How to redirect to another webpage in JavaScript/jQuery?

It worked for me. No problems on using javascript:history.go(-1) on Google Chrome.

1. To use it, ensure that you should have history on that tab.
2. Add javascript:history.go(-1) on the enter URL space.
3. It shall work for a few seconds.

Just paste this into your line of codes:

<meta http-equiv="X-UA-Compatible" content="IE=Edge" />

Maybe it is not quite as elegant, but the following might also work. I suspect asynchronously this would not be a good solution.

$p = Start-Process myjob.bat -redirectstandardoutput $logtempfile -redirecterroroutput $logtempfile -wait
add-content $logfile (get-content $logtempfile)

There's also the function tags, a bit more flexible:

<%@ taglib uri="http://java.sun.com/jsp/jstl/functions" prefix="fn" %>
<c:if test="${fn:length(list) > 0}">

And here's the tag documentation.

Switch your false and true returns? I think if you put those as a function in the visibility area, then false will show it and true will not show it.

Here is the most reliable way to get the lat/long from zip code (i.e. postal code):

https://maps.googleapis.com/maps/api/geocode/json?key=YOUR_API_KEY&components=postal_code:97403

Please check the configuration file in the project, set ID and password there, so that you execute the package

You don't need to change the delimiter to display the right part of the string with cut.

The -f switch of the cut command is the n-TH element separated by your delimiter : :, so you can just type :

 grep puddle2_1557936 | cut -d ":" -f2

Another solutions (adapt it a bit) if you want fun :

Using grep :

grep -oP 'puddle2_1557936:\K.*' <<< 'puddle2_1557936:/home/rogers.williams/folderz/puddle2'                                                                        
/home/rogers.williams/folderz/puddle2

or still with look around regex

grep -oP '(?<=puddle2_1557936:).*' <<< 'puddle2_1557936:/home/rogers.williams/folderz/puddle2'                                                                    
/home/rogers.williams/folderz/puddle2

or with perl :

perl -lne '/puddle2_1557936:(.*)/ and print $1' <<< 'puddle2_1557936:/home/rogers.williams/folderz/puddle2'                                                      
/home/rogers.williams/folderz/puddle2

or using ruby (thanks to glenn jackman)

ruby -F: -ane '/puddle2_1557936/ and puts $F[1]' <<< 'puddle2_1557936:/home/rogers.williams/folderz/puddle2'
/home/rogers.williams/folderz/puddle2

or with awk :

awk -F'puddle2_1557936:' '{print $2}'  <<< 'puddle2_1557936:/home/rogers.williams/folderz/puddle2'
/home/rogers.williams/folderz/puddle2

or with python :

python -c 'import sys; print(sys.argv[1].split("puddle2_1557936:")[1])' 'puddle2_1557936:/home/rogers.williams/folderz/puddle2'
/home/rogers.williams/folderz/puddle2

or using only bash :

IFS=: read _ a <<< "puddle2_1557936:/home/rogers.williams/folderz/puddle2"
echo "$a"
/home/rogers.williams/folderz/puddle2

or using js in a shell :

js<<EOF
var x = 'puddle2_1557936:/home/rogers.williams/folderz/puddle2'
print(x.substr(x.indexOf(":")+1))
EOF
/home/rogers.williams/folderz/puddle2

or using php in a shell :

php -r 'preg_match("/puddle2_1557936:(.*)/", $argv[1], $m); echo "$m[1]\n";' 'puddle2_1557936:/home/rogers.williams/folderz/puddle2' 
/home/rogers.williams/folderz/puddle2

    var res = from element in list
              group element by element.F1
                  into groups
                  select groups.OrderBy(p => p.F2).First();

Be sure you are editing php.ini not php-development.ini or php-production.ini, php.ini file type is Configuration setting and when you edit it in editor it show .ini extension. You can find php.ini here: xampp/php/php

Then

upload_max_filesize = 128M
post_max_size = 128M
max_execution_time = 900
max_input_time = 50000000
memory_limit = 256M

Another way you can do this is by using the substitute function. Substitute "(", ")" and "," with spaces. e.g.

 =SUBSTITUTE(SUBSTITUTE(SUBSTITUTE(A1, "(", " "), ")", " "), ",", " ")

i get the solution. i've using cygwin and this is the problem the rsync command for Windows work only in windows shell and works in the windows powershell.

A few times it has happened the same error between two linux boxes. and appears to be by incompatible versions of rsync

To disable all mouse click

var event = $(document).click(function(e) {
    e.stopPropagation();
    e.preventDefault();
    e.stopImmediatePropagation();
    return false;
});

// disable right click
$(document).bind('contextmenu', function(e) {
    e.stopPropagation();
    e.preventDefault();
    e.stopImmediatePropagation();
    return false;
});

to enable it again:

$(document).unbind('click');
$(document).unbind('contextmenu');

I just put this

$result = mb_convert_encoding($result,'UTF-8','UTF-8'); 
    $result = json_decode($result);

and it's working

With ps or similar tools you will only get the amount of memory pages allocated by that process. This number is correct, but:

• does not reflect the actual amount of memory used by the application, only the amount of memory reserved for it

• can be misleading if pages are shared, for example by several threads or by using dynamically linked libraries

If you really want to know what amount of memory your application actually uses, you need to run it within a profiler. For example, Valgrind can give you insights about the amount of memory used, and, more importantly, about possible memory leaks in your program. The heap profiler tool of Valgrind is called 'massif':

Massif is a heap profiler. It performs detailed heap profiling by taking regular snapshots of a program's heap. It produces a graph showing heap usage over time, including information about which parts of the program are responsible for the most memory allocations. The graph is supplemented by a text or HTML file that includes more information for determining where the most memory is being allocated. Massif runs programs about 20x slower than normal.

As explained in the Valgrind documentation, you need to run the program through Valgrind:

valgrind --tool=massif <executable> <arguments>

Massif writes a dump of memory usage snapshots (e.g. massif.out.12345). These provide, (1) a timeline of memory usage, (2) for each snapshot, a record of where in your program memory was allocated. A great graphical tool for analyzing these files is massif-visualizer. But I found ms_print, a simple text-based tool shipped with Valgrind, to be of great help already.

To find memory leaks, use the (default) memcheck tool of valgrind.

Here is how I would write a validator for MaxValue

public class MaxValueAttribute : ValidationAttribute
    {
        private readonly int _maxValue;

        public MaxValueAttribute(int maxValue)
        {
            _maxValue = maxValue;
        }

        public override bool IsValid(object value)
        {
            return (int) value <= _maxValue;
        }
    }

The MinValue Attribute should be fairly the same

For Eclipse Editor

For Single Line (Toggle Effect)

Comment : Ctrl+Shift+c

Uncomment: Ctrl+Shift+c

For Multiple Lines (Toggle Effect) (Select the lines you want to comment)

comment : Ctrl+Shift+c

Uncomment: Ctrl+Shift+c

It is for all html , css , jsp , java . It gives toggle effect.

There is a new tool called GitHub HTML Preview, which does exactly what you want. Just prepend http://htmlpreview.github.com/? to the URL of any HTML file, e.g. http://htmlpreview.github.com/?https://github.com/twbs/bootstrap/blob/gh-pages/2.3.2/index.html

Note: This tool is actually a github.io page and is not affiliated with github as a company.

You cannot concatenate multiple fields with a string. You need to select a field instand of all (*).

If you work with Visual Studio then it is pretty easy to get persistable settings. Right click on the project in Solution Explorer and choose Properties. Select the Settings tab and click on the hyperlink if settings doesn't exist.

Use the Settings tab to create application settings. Visual Studio creates the files Settings.settings and Settings.Designer.settings that contain the singleton class Settings inherited from ApplicationSettingsBase. You can access this class from your code to read/write application settings:

Properties.Settings.Default["SomeProperty"] = "Some Value";
Properties.Settings.Default.Save(); // Saves settings in application configuration file

This technique is applicable both for console, Windows Forms, and other project types.

Note that you need to set the scope property of your settings. If you select Application scope then Settings.Default.<your property> will be read-only.

Reference: How To: Write User Settings at Run Time with C# - Microsoft Docs

For any googlers like me, where..

.btn:focus {
    outline: none;
}

still didn't work in Google Chrome, the following should completely remove any button glow.

.btn:focus,.btn:active:focus,.btn.active:focus,
.btn.focus,.btn:active.focus,.btn.active.focus {
    outline: none;
}

Swift 5 version

The answers given here are either outdated or incorrect because they don't take into account the following:

1. The pixel size of the image can differ from its point size that is returned by image.size.width/image.size.height.
2. There can be various layouts used by pixel components in the image, such as BGRA, ABGR, ARGB etc. or may not have an alpha component at all, such as BGR and RGB. For example, UIView.drawHierarchy(in:afterScreenUpdates:) method can produce BGRA images.
3. Color components can be premultiplied by the alpha for all pixels in the image and need to be divided by alpha in order to restore the original color.
4. For memory optimization used by CGImage, the size of a pixel row in bytes can be greater than the mere multiplication of the pixel width by 4.

The code below is to provide a universal Swift 5 solution to get the UIColor of a pixel for all such special cases. The code is optimized for usability and clarity, not for performance.

public extension UIImage {

    var pixelWidth: Int {
        return cgImage?.width ?? 0
    }

    var pixelHeight: Int {
        return cgImage?.height ?? 0
    }

    func pixelColor(x: Int, y: Int) -> UIColor {
        assert(
            0..<pixelWidth ~= x && 0..<pixelHeight ~= y,
            "Pixel coordinates are out of bounds")

        guard
            let cgImage = cgImage,
            let data = cgImage.dataProvider?.data,
            let dataPtr = CFDataGetBytePtr(data),
            let colorSpaceModel = cgImage.colorSpace?.model,
            let componentLayout = cgImage.bitmapInfo.componentLayout
        else {
            assertionFailure("Could not get a pixel of an image")
            return .clear
        }

        assert(
            colorSpaceModel == .rgb,
            "The only supported color space model is RGB")
        assert(
            cgImage.bitsPerPixel == 32 || cgImage.bitsPerPixel == 24,
            "A pixel is expected to be either 4 or 3 bytes in size")

        let bytesPerRow = cgImage.bytesPerRow
        let bytesPerPixel = cgImage.bitsPerPixel/8
        let pixelOffset = y*bytesPerRow + x*bytesPerPixel

        if componentLayout.count == 4 {
            let components = (
                dataPtr[pixelOffset + 0],
                dataPtr[pixelOffset + 1],
                dataPtr[pixelOffset + 2],
                dataPtr[pixelOffset + 3]
            )

            var alpha: UInt8 = 0
            var red: UInt8 = 0
            var green: UInt8 = 0
            var blue: UInt8 = 0

            switch componentLayout {
            case .bgra:
                alpha = components.3
                red = components.2
                green = components.1
                blue = components.0
            case .abgr:
                alpha = components.0
                red = components.3
                green = components.2
                blue = components.1
            case .argb:
                alpha = components.0
                red = components.1
                green = components.2
                blue = components.3
            case .rgba:
                alpha = components.3
                red = components.0
                green = components.1
                blue = components.2
            default:
                return .clear
            }

            // If chroma components are premultiplied by alpha and the alpha is `0`,
            // keep the chroma components to their current values.
            if cgImage.bitmapInfo.chromaIsPremultipliedByAlpha && alpha != 0 {
                let invUnitAlpha = 255/CGFloat(alpha)
                red = UInt8((CGFloat(red)*invUnitAlpha).rounded())
                green = UInt8((CGFloat(green)*invUnitAlpha).rounded())
                blue = UInt8((CGFloat(blue)*invUnitAlpha).rounded())
            }

            return .init(red: red, green: green, blue: blue, alpha: alpha)

        } else if componentLayout.count == 3 {
            let components = (
                dataPtr[pixelOffset + 0],
                dataPtr[pixelOffset + 1],
                dataPtr[pixelOffset + 2]
            )

            var red: UInt8 = 0
            var green: UInt8 = 0
            var blue: UInt8 = 0

            switch componentLayout {
            case .bgr:
                red = components.2
                green = components.1
                blue = components.0
            case .rgb:
                red = components.0
                green = components.1
                blue = components.2
            default:
                return .clear
            }

            return .init(red: red, green: green, blue: blue, alpha: UInt8(255))

        } else {
            assertionFailure("Unsupported number of pixel components")
            return .clear
        }
    }

}

public extension UIColor {

    convenience init(red: UInt8, green: UInt8, blue: UInt8, alpha: UInt8) {
        self.init(
            red: CGFloat(red)/255,
            green: CGFloat(green)/255,
            blue: CGFloat(blue)/255,
            alpha: CGFloat(alpha)/255)
    }

}

public extension CGBitmapInfo {

    enum ComponentLayout {

        case bgra
        case abgr
        case argb
        case rgba
        case bgr
        case rgb

        var count: Int {
            switch self {
            case .bgr, .rgb: return 3
            default: return 4
            }
        }

    }

    var componentLayout: ComponentLayout? {
        guard let alphaInfo = CGImageAlphaInfo(rawValue: rawValue & Self.alphaInfoMask.rawValue) else { return nil }
        let isLittleEndian = contains(.byteOrder32Little)

        if alphaInfo == .none {
            return isLittleEndian ? .bgr : .rgb
        }
        let alphaIsFirst = alphaInfo == .premultipliedFirst || alphaInfo == .first || alphaInfo == .noneSkipFirst

        if isLittleEndian {
            return alphaIsFirst ? .bgra : .abgr
        } else {
            return alphaIsFirst ? .argb : .rgba
        }
    }

    var chromaIsPremultipliedByAlpha: Bool {
        let alphaInfo = CGImageAlphaInfo(rawValue: rawValue & Self.alphaInfoMask.rawValue)
        return alphaInfo == .premultipliedFirst || alphaInfo == .premultipliedLast
    }

}

I just got to similar problem and Joe White's solution seems to me simple and clean. I reused it and defined it as an attached property of Window

public class WindowBehavior
{
    private static readonly Type OwnerType = typeof (WindowBehavior);

    #region HideCloseButton (attached property)

    public static readonly DependencyProperty HideCloseButtonProperty =
        DependencyProperty.RegisterAttached(
            "HideCloseButton",
            typeof (bool),
            OwnerType,
            new FrameworkPropertyMetadata(false, new PropertyChangedCallback(HideCloseButtonChangedCallback)));

    [AttachedPropertyBrowsableForType(typeof(Window))]
    public static bool GetHideCloseButton(Window obj) {
        return (bool)obj.GetValue(HideCloseButtonProperty);
    }

    [AttachedPropertyBrowsableForType(typeof(Window))]
    public static void SetHideCloseButton(Window obj, bool value) {
        obj.SetValue(HideCloseButtonProperty, value);
    }

    private static void HideCloseButtonChangedCallback(DependencyObject d, DependencyPropertyChangedEventArgs e)
    {
        var window = d as Window;
        if (window == null) return;

        var hideCloseButton = (bool)e.NewValue;
        if (hideCloseButton && !GetIsHiddenCloseButton(window)) {
            if (!window.IsLoaded) {
                window.Loaded += HideWhenLoadedDelegate;
            }
            else {
                HideCloseButton(window);
            }
            SetIsHiddenCloseButton(window, true);
        }
        else if (!hideCloseButton && GetIsHiddenCloseButton(window)) {
            if (!window.IsLoaded) {
                window.Loaded -= ShowWhenLoadedDelegate;
            }
            else {
                ShowCloseButton(window);
            }
            SetIsHiddenCloseButton(window, false);
        }
    }

    #region Win32 imports

    private const int GWL_STYLE = -16;
    private const int WS_SYSMENU = 0x80000;
    [DllImport("user32.dll", SetLastError = true)]
    private static extern int GetWindowLong(IntPtr hWnd, int nIndex);
    [DllImport("user32.dll")]
    private static extern int SetWindowLong(IntPtr hWnd, int nIndex, int dwNewLong);

    #endregion

    private static readonly RoutedEventHandler HideWhenLoadedDelegate = (sender, args) => {
        if (sender is Window == false) return;
        var w = (Window)sender;
        HideCloseButton(w);
        w.Loaded -= HideWhenLoadedDelegate;
    };

    private static readonly RoutedEventHandler ShowWhenLoadedDelegate = (sender, args) => {
        if (sender is Window == false) return;
        var w = (Window)sender;
        ShowCloseButton(w);
        w.Loaded -= ShowWhenLoadedDelegate;
    };

    private static void HideCloseButton(Window w) {
        var hwnd = new WindowInteropHelper(w).Handle;
        SetWindowLong(hwnd, GWL_STYLE, GetWindowLong(hwnd, GWL_STYLE) & ~WS_SYSMENU);
    }

    private static void ShowCloseButton(Window w) {
        var hwnd = new WindowInteropHelper(w).Handle;
        SetWindowLong(hwnd, GWL_STYLE, GetWindowLong(hwnd, GWL_STYLE) | WS_SYSMENU);
    }

    #endregion

    #region IsHiddenCloseButton (readonly attached property)

    private static readonly DependencyPropertyKey IsHiddenCloseButtonKey =
        DependencyProperty.RegisterAttachedReadOnly(
            "IsHiddenCloseButton",
            typeof (bool),
            OwnerType,
            new FrameworkPropertyMetadata(false));

    public static readonly DependencyProperty IsHiddenCloseButtonProperty =
        IsHiddenCloseButtonKey.DependencyProperty;

    [AttachedPropertyBrowsableForType(typeof(Window))]
    public static bool GetIsHiddenCloseButton(Window obj) {
        return (bool)obj.GetValue(IsHiddenCloseButtonProperty);
    }

    private static void SetIsHiddenCloseButton(Window obj, bool value) {
        obj.SetValue(IsHiddenCloseButtonKey, value);
    }

    #endregion

}

Then in XAML you just set it like this:

<Window 
    x:Class="WafClient.Presentation.Views.SampleWindow"
    xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
    xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
    xmlns:u="clr-namespace:WafClient.Presentation.Behaviors"
    ResizeMode="NoResize"
    u:WindowBehavior.HideCloseButton="True">
    ...
</Window>

Date arithmetic is not needed if you just want to display the same timestamp in different timezones:

$format = "M d, Y h:ia";
$timestamp = gmdate($format);

date_default_timezone_set("UTC");
$utc_datetime = date($format, $timestamp);

date_default_timezone_set("America/Guayaquil");
$local_datetime = date($format, $timestamp);

As of jQuery 1.5, there is a headers hash you can pass in as follows:

$.ajax({
    url: "/test",
    headers: {"X-Test-Header": "test-value"}
});

From http://api.jquery.com/jQuery.ajax:

headers (added 1.5): A map of additional header key/value pairs to send along with the request. This setting is set before the beforeSend function is called; therefore, any values in the headers setting can be overwritten from within the beforeSend function.

I placed a TextView on top of the Spinner, same size and background as the Spinner, so that I would have more control over what it looked like before the user clicks on it. With the TextView there, I could also use the TextView to flag when the user has started interacting.

My Kotlin code looks something like this:

private var mySpinnerHasBeenTapped = false

private fun initializeMySpinner() {

    my_hint_text_view.setOnClickListener {
        mySpinnerHasBeenTapped = true //turn flag to true
        my_spinner.performClick() //call spinner click
    }

    //Basic spinner setup stuff
    val myList = listOf("Leonardo", "Michelangelo", "Rafael", "Donatello")
    val dataAdapter: ArrayAdapter<String> = ArrayAdapter<String>(this, android.R.layout.simple_spinner_dropdown_item, myList)
    my_spinner.adapter = dataAdapter

    my_spinner.onItemSelectedListener = object : OnItemSelectedListener {

        override fun onItemSelected(parent: AdapterView<*>?, view: View, position: Int, id: Long) {

            if (mySpinnerHasBeenTapped) { //code below will only run after the user has clicked
                my_hint_text_view.visibility = View.GONE //once an item has been selected, hide the textView
                //Perform action here
            }
        }

        override fun onNothingSelected(parent: AdapterView<*>?) {
            //Do nothing
        }
    }
}

Layout file looks something like this, with the important part being that the Spinner and TextView share the same width, height, and margins:

        <FrameLayout
            android:layout_width="match_parent"
            android:layout_height="wrap_content">

            <Spinner
                android:id="@+id/my_spinner"
                android:layout_width="match_parent"
                android:layout_height="35dp"
                android:layout_marginStart="10dp"
                android:layout_marginEnd="10dp"
                android:background="@drawable/bg_for_spinners"

                android:paddingStart="8dp"
                android:paddingEnd="30dp"
                android:singleLine="true" />

            <TextView
                android:id="@+id/my_hint_text_view"
                android:layout_width="match_parent"
                android:layout_height="35dp"                
                android:layout_marginStart="10dp"
                android:layout_marginEnd="10dp"
                android:background="@drawable/bg_for_spinners"

                android:paddingStart="8dp"
                android:paddingEnd="30dp"
                android:singleLine="true"
                android:gravity="center_vertical"
                android:text="*Select A Turtle"
                android:textColor="@color/green_ooze"
                android:textSize="16sp" />

        </FrameLayout>

I'm sure the other solutions work where you ignore the first onItemSelected call, but I really don't like the idea of assuming it will always be called.

@media print {_x000D_
   a[href]:after {_x000D_
      display: none;_x000D_
      visibility: hidden;_x000D_
   }_x000D_
}

Work's perfect.

Upgrade to use API 23 (Android 6.0) or change back the appcompat-v7 to 22.2.2 version in Gradle. This work for me when add google play service

All I had to do was load localhost:80/phpmyadmin and then the browser figured it out. After that, localhost/phpmyadmin worked.

I had the same problem and resulted that was an "every day" error in the rails controller. I don't know why, but on production, puma runs the error again and again causing the message:

upstream timed out (110: Connection timed out) while reading response header from upstream

Probably because Nginx tries to get the data from puma again and again.The funny thing is that the error caused the timeout message even if I'm calling a different action in the controller, so, a single typo blocks all the app.

Check your log/puma.stderr.log file to see if that is the situation.

No longer works for spreadsheets Protected with Excel 2013 or later -- they improved the pw hash. So now need to unzip .xlsx and hack the internals.

You can use html5 tag to download the image directly

<?php
$file = "Bang.png"; //Let say If I put the file name Bang.png
echo "<a href='download.php?nama=".$file."' download>donload</a> ";
?>

For more information, check this link http://www.w3schools.com/tags/att_a_download.asp

localhost is a special hostname that almost always resolves to 127.0.0.1. If you ask someone else to connect to http://localhost they'll be connecting to their computer instead or yours.

To share your web server with someone else you'll need to find your IP address or your hostname and provide that to them instead. On windows you can find this with ipconfig /all on a command line.

You'll also need to make sure any firewalls you may have configured allow traffic on port 80 to connect to the WAMP server.

Processes only have a limited amount of stack space available - far less than the amount of memory available to malloc().

By using alloca() you dramatically increase your chances of getting a Stack Overflow error (if you're lucky, or an inexplicable crash if you're not).

I used RenderAction html helper for razor in layout.

@{
   Html.RenderAction("Action", "Controller");
 }

I needed it for simple string. So my action returns string and writes it down easy in view. But if you need complex data you can return PartialViewResult and model.

 public PartialViewResult Action()
    {
        var model = someList;
        return PartialView("~/Views/Shared/_maPartialView.cshtml", model);
    }

You just need to put your model begining of the partial view '_maPartialView.cshtml' that you created

@model List<WhatEverYourObjeIs>

Then you can use data in the model in that partial view with html.

Since you're comparing numbers, you can use an arithmetic expression, which allows for simpler handling of parameters and comparison:

wget -q --tries=10 --timeout=20 --spider http://google.com
if (( $? != 0 )); then
    echo "Sorry you are Offline"
    exit 1
fi

Notice how instead of -ne, you can just use !=. In an arithmetic context, we don't even have to prepend $ to parameters, i.e.,

var_a=1
var_b=2
(( var_a < var_b )) && echo "a is smaller"

works perfectly fine. This doesn't appply to the $? special parameter, though.

Further, since (( ... )) evaluates non-zero values to true, i.e., has a return status of 0 for non-zero values and a return status of 1 otherwise, we could shorten to

if (( $? )); then

but this might confuse more people than the keystrokes saved are worth.

The (( ... )) construct is available in Bash, but not required by the POSIX shell specification (mentioned as possible extension, though).

This all being said, it's better to avoid $? altogether in my opinion, as in Cole's answer and Steven's answer.

Basically you need to do two loops here. The one you are doing already is iterating each element in the 0th array element.

You have programs: [ {...}, {...} ] so programs[0] is { "name":"zonealarm", "price":"500" } So your loop is just going over that.

You could do an outer loop over the array

$.each(data.programs, function(index) {

    // then loop over the object elements
    $.each(data.programs[index], function(key, value) {
        console.log(key + ": " + value);
    }

}

You could fill the dependend cell (D2) by a User Defined Function (VBA Macro Function) that takes the value of the C2-Cell as input parameter, returning the current date as ouput.

Having C2 as input parameter for the UDF in D2 tells Excel that it needs to reevaluate D2 everytime C2 changes (that is if auto-calculation of formulas is turned on for the workbook).

EDIT:

Here is some code:

For the UDF:

    Public Function UDF_Date(ByVal data) As Date

        UDF_Date = Now()

    End Function

As Formula in D2:

=UDF_Date(C2)

You will have to give the D2-Cell a Date-Time Format, or it will show a numeric representation of the date-value.

And you can expand the formula over the desired range by draging it if you keep the C2 reference in the D2-formula relative.

Note: This still might not be the ideal solution because every time Excel recalculates the workbook the date in D2 will be reset to the current value. To make D2 only reflect the last time C2 was changed there would have to be some kind of tracking of the past value(s) of C2. This could for example be implemented in the UDF by providing also the address alonside the value of the input parameter, storing the input parameters in a hidden sheet, and comparing them with the previous values everytime the UDF gets called.

Addendum:

Here is a sample implementation of an UDF that tracks the changes of the cell values and returns the date-time when the last changes was detected. When using it, please be aware that:

• The usage of the UDF is the same as described above.

• The UDF works only for single cell input ranges.

• The cell values are tracked by storing the last value of cell and the date-time when the change was detected in the document properties of the workbook. If the formula is used over large datasets the size of the file might increase considerably as for every cell that is tracked by the formula the storage requirements increase (last value of cell + date of last change.) Also, maybe Excel is not capable of handling very large amounts of document properties and the code might brake at a certain point.

• If the name of a worksheet is changed all the tracking information of the therein contained cells is lost.

• The code might brake for cell-values for which conversion to string is non-deterministic.

• The code below is not tested and should be regarded only as proof of concept. Use it at your own risk.

  Public Function UDF_Date(ByVal inData As Range) As Date
  
      Dim wb As Workbook
      Dim dProps As DocumentProperties
      Dim pValue As DocumentProperty
      Dim pDate As DocumentProperty
      Dim sName As String
      Dim sNameDate As String
  
      Dim bDate As Boolean
      Dim bValue As Boolean
      Dim bChanged As Boolean
  
      bDate = True
      bValue = True
  
      bChanged = False
  
  
      Dim sVal As String
      Dim dDate As Date
  
      sName = inData.Address & "_" & inData.Worksheet.Name
      sNameDate = sName & "_dat"
  
      sVal = CStr(inData.Value)
      dDate = Now()
  
      Set wb = inData.Worksheet.Parent
  
      Set dProps = wb.CustomDocumentProperties
  
  On Error Resume Next
  
      Set pValue = dProps.Item(sName)
  
      If Err.Number <> 0 Then
          bValue = False
          Err.Clear
      End If
  
  On Error GoTo 0
  
      If Not bValue Then
          bChanged = True
          Set pValue = dProps.Add(sName, False, msoPropertyTypeString, sVal)
      Else
          bChanged = pValue.Value <> sVal
          If bChanged Then
              pValue.Value = sVal
          End If
      End If
  
  On Error Resume Next
  
      Set pDate = dProps.Item(sNameDate)
  
      If Err.Number <> 0 Then
          bDate = False
          Err.Clear
      End If
  
  On Error GoTo 0
  
      If Not bDate Then
          Set pDate = dProps.Add(sNameDate, False, msoPropertyTypeDate, dDate)
      End If
  
      If bChanged Then
          pDate.Value = dDate
      Else
          dDate = pDate.Value
      End If
  
  
      UDF_Date = dDate
   End Function
  

Make the insertion of the date conditional upon the range.

This has an advantage of not changing the dates unless the content of the cell is changed, and it is in the range C2:C2, even if the sheet is closed and saved, it doesn't recalculate unless the adjacent cell changes.

Adapted from this tip and @Paul S answer

Private Sub Worksheet_Change(ByVal Target As Range)
 Dim R1 As Range
 Dim R2 As Range
 Dim InRange As Boolean
    Set R1 = Range(Target.Address)
    Set R2 = Range("C2:C20")
    Set InterSectRange = Application.Intersect(R1, R2)

  InRange = Not InterSectRange Is Nothing
     Set InterSectRange = Nothing
   If InRange = True Then
     R1.Offset(0, 1).Value = Now()
   End If
     Set R1 = Nothing
     Set R2 = Nothing
 End Sub

$(function() {
        $("#select-image").selectable({
            selected: function( event, ui ) { 
                var $variable = $('.ui-selected').html(); 
                console.log($variable);
            }
        });
    });

or

$(function() {
        $("#select-image").selectable({
            selected: function( event, ui ) { 
                var $variable = $('.ui-selected').text(); 
                console.log($variable);
            }
        });
    });

or

$(function() {
        $("#select-image").selectable({
            selected: function( event, ui ) { 
                var $variable = $('.ui-selected').val(); 
                console.log($variable);
            }
        });
    });

The Kotlin answer:

val browserIntent = Intent(Intent.ACTION_VIEW, uri)
ContextCompat.startActivity(context, browserIntent, null)

I have added an extension on Uri to make this even easier

myUri.openInBrowser(context)

fun Uri?.openInBrowser(context: Context) {
    this ?: return // Do nothing if uri is null

    val browserIntent = Intent(Intent.ACTION_VIEW, this)
    ContextCompat.startActivity(context, browserIntent, null)
}

As a bonus, here is a simple extension function to safely convert a String to Uri.

"https://stackoverflow.com".asUri()?.openInBrowser(context)

fun String?.asUri(): Uri? {
    try {
        return Uri.parse(this)
    } catch (e: Exception) {}
    return null
}

As an aside, it is always a good practice (and possibly a solution for this type of issue) to delete a large number of rows by using batches:

WHILE EXISTS (SELECT 1 
              FROM   YourTable 
              WHERE  <yourCondition>) 
  DELETE TOP(10000) FROM YourTable 
  WHERE  <yourCondition>

The general theory can be found in wikipedia's article on Kademlia. The specific protocol specification used in bittorrent is here: http://wiki.theory.org/BitTorrentDraftDHTProtocol

E.g. ip 192.30.253.112 in warning:

$ git clone [email protected]:EXAMPLE.git
Cloning into 'EXAMPLE'...
Warning: Permanently added the RSA host key for IP address '192.30.253.112' to the list of known hosts.
remote: Enumerating objects: 135, done.
remote: Total 135 (delta 0), reused 0 (delta 0), pack-reused 135
Receiving objects: 100% (135/135), 9.49 MiB | 2.46 MiB/s, done.
Resolving deltas: 100% (40/40), done.

It's the ip if you nslookup github url:

$ nslookup github.com
Server:         127.0.0.53
Address:        127.0.0.53#53

Non-authoritative answer:
Name:   github.com
Address: 192.30.253.112
Name:   github.com
Address: 192.30.253.113

$ 

I think I just discovered a way to apply overlapping conditions in the expected way using VBA. After hours of trying out different approaches I found that what worked was changing the "Applies to" range for the conditional format rule, after every single one was created!

This is my working example:

Sub ResetFormatting()
' ----------------------------------------------------------------------------------------
' Written by..: Julius Getz Mørk
' Purpose.....: If conditional formatting ranges are broken it might cause a huge increase
'               in duplicated formatting rules that in turn will significantly slow down
'               the spreadsheet.
'               This macro is designed to reset all formatting rules to default.
' ---------------------------------------------------------------------------------------- 

On Error GoTo ErrHandler

' Make sure we are positioned in the correct sheet
WS_PROMO.Select

' Disable Events
Application.EnableEvents = False

' Delete all conditional formatting rules in sheet
Cells.FormatConditions.Delete

' CREATE ALL THE CONDITIONAL FORMATTING RULES:

' (1) Make negative values red
With Cells(1, 1).FormatConditions.add(xlCellValue, xlLess, "=0")
    .Font.Color = -16776961
    .StopIfTrue = False
End With

' (2) Highlight defined good margin as green values
With Cells(1, 1).FormatConditions.add(xlCellValue, xlGreater, "=CP_HIGH_MARGIN_DEFINITION")
    .Font.Color = -16744448
    .StopIfTrue = False
End With

' (3) Make article strategy "D" red
With Cells(1, 1).FormatConditions.add(xlCellValue, xlEqual, "=""D""")
    .Font.Bold = True
    .Font.Color = -16776961
    .StopIfTrue = False
End With

' (4) Make article strategy "A" blue
With Cells(1, 1).FormatConditions.add(xlCellValue, xlEqual, "=""A""")
    .Font.Bold = True
    .Font.Color = -10092544
    .StopIfTrue = False
End With

' (5) Make article strategy "W" green
With Cells(1, 1).FormatConditions.add(xlCellValue, xlEqual, "=""W""")
    .Font.Bold = True
    .Font.Color = -16744448
    .StopIfTrue = False
End With

' (6) Show special cost in bold green font
With Cells(1, 1).FormatConditions.add(xlCellValue, xlNotEqual, "=0")
    .Font.Bold = True
    .Font.Color = -16744448
    .StopIfTrue = False
End With

' (7) Highlight duplicate heading names. There can be none.
With Cells(1, 1).FormatConditions.AddUniqueValues
    .DupeUnique = xlDuplicate
    .Font.Color = -16383844
    .Interior.Color = 13551615
    .StopIfTrue = False
End With

' (8) Make heading rows bold with yellow background
With Cells(1, 1).FormatConditions.add(Type:=xlExpression, Formula1:="=IF($B8=""H"";TRUE;FALSE)")
    .Font.Bold = True
    .Interior.Color = 13434879
    .StopIfTrue = False
End With

' Modify the "Applies To" ranges
Cells.FormatConditions(1).ModifyAppliesToRange Range("O8:P507")
Cells.FormatConditions(2).ModifyAppliesToRange Range("O8:O507")
Cells.FormatConditions(3).ModifyAppliesToRange Range("B8:B507")
Cells.FormatConditions(4).ModifyAppliesToRange Range("B8:B507")
Cells.FormatConditions(5).ModifyAppliesToRange Range("B8:B507")
Cells.FormatConditions(6).ModifyAppliesToRange Range("E8:E507")
Cells.FormatConditions(7).ModifyAppliesToRange Range("A7:AE7")
Cells.FormatConditions(8).ModifyAppliesToRange Range("B8:L507")


ErrHandler:
Application.EnableEvents = False

End Sub

you should try this:

-(CGFloat)dynamicLblHeight:(UILabel *)lbl
{
    CGFloat lblWidth = lbl.frame.size.width;
    CGRect lblTextSize = [lbl.text boundingRectWithSize:CGSizeMake(lblWidth, MAXFLOAT)
                                               options:NSStringDrawingUsesLineFragmentOrigin
                                            attributes:@{NSFontAttributeName:lbl.font}
                                               context:nil];
    return lblTextSize.size.height;
}

You can use readelf to explore the ELF headers. readelf -d will list the direct dependencies as NEEDED sections.

 $ readelf -d elfbin

Dynamic section at offset 0xe30 contains 22 entries:
  Tag        Type                         Name/Value
 0x0000000000000001 (NEEDED)             Shared library: [libssl.so.1.0.0]
 0x0000000000000001 (NEEDED)             Shared library: [libc.so.6]
 0x000000000000000c (INIT)               0x400520
 0x000000000000000d (FINI)               0x400758
 ...

Some good answers here but none cover the case of your start time being in a different day than your end time. If you need to straddle the day boundary, then something like this may help:

TimeSpan start = TimeSpan.Parse("22:00"); // 10 PM
TimeSpan end = TimeSpan.Parse("02:00");   // 2 AM
TimeSpan now = DateTime.Now.TimeOfDay;

if (start <= end)
{
    // start and stop times are in the same day
    if (now >= start && now <= end)
    {
        // current time is between start and stop
    }
}
else
{
    // start and stop times are in different days
    if (now >= start || now <= end)
    {
       // current time is between start and stop
    }
}

Note that in this example the time boundaries are inclusive and that this still assumes less than a 24-hour difference between start and stop.

I found a purely Javascript solution here that seems to work for major browsers for both PC and Mac. I tested it in BrowserStack for both platforms and it works like a dream. The Javascript solution posted in this thread by Jason D'Souza is really nice because it gives you a lot of information about the browser, but it has an issue identifying Edge which seems to look like Chrome to it. His code could probably be modified a bit with this solution to make it work for Edge too. Here is the snippet of code I found:

    var browser = (function (agent) {
    switch (true) {
        case agent.indexOf("edge") > -1: return "edge";
        case agent.indexOf("edg") > -1: return "chromium based edge (dev or canary)";
        case agent.indexOf("opr") > -1 && !!window.opr: return "opera";
        case agent.indexOf("chrome") > -1 && !!window.chrome: return "chrome";
        case agent.indexOf("trident") > -1: return "ie";
        case agent.indexOf("firefox") > -1: return "firefox";
        case agent.indexOf("safari") > -1: return "safari";
        default: return "other";
    }
})(window.navigator.userAgent.toLowerCase());
console.log(window.navigator.userAgent.toLowerCase() + "\n" + browser);

Simple functions,

function Encrypt(value) 
{
  var result="";
  for(i=0;i<value.length;i++)
  {
    if(i<value.length-1)
    {
        result+=value.charCodeAt(i)+10;
        result+="-";
    }
    else
    {
        result+=value.charCodeAt(i)+10;
    }
  }
  return result;
}
function Decrypt(value)
{
  var result="";
  var array = value.split("-");

  for(i=0;i<array.length;i++)
  {
    result+=String.fromCharCode(array[i]-10);
  }
  return result;
} 

Nested fragments are supported in android 4.2 and later

The Android Support Library also now supports nested fragments, so you can implement nested fragment designs on Android 1.6 and higher.

To nest a fragment, simply call getChildFragmentManager() on the Fragment in which you want to add a fragment. This returns a FragmentManager that you can use like you normally do from the top-level activity to create fragment transactions. For example, here’s some code that adds a fragment from within an existing Fragment class:

Fragment videoFragment = new VideoPlayerFragment();
FragmentTransaction transaction = getChildFragmentManager().beginTransaction();
transaction.add(R.id.video_fragment, videoFragment).commit();

To get more idea about nested fragments, please go through these tutorials
Part 1
Part 2
Part 3

and here is a SO post which discuss about best practices for nested fragments.

Requesting focus isn't enough to show the keyboard.

To get focus and show the keyboard you would write something like this:

if(myEditText.requestFocus()) {
    getWindow().setSoftInputMode(WindowManager.LayoutParams.SOFT_INPUT_STATE_ALWAYS_VISIBLE);
}

EDIT: Adding extra info to the answer after the checkLiganame method was added.

In the checkLiganame method you check if the cursor is null. The cursor will always return an object, so the check for null doesn't do anything. However the problem is in the line db.close();

When you close the database connection, the Cursor becomes invalid and most probably is nulled.

So close the database after you've fetched the value.

Instead of checking the cursor for null, you should check if the number of rows returned are more than 0: if(cursor.getCount() > 0) and then set your boolean to true if so.

EDIT2: So here's some code for how to make it work. EDIT3: Sorry wrong code I added... ;S

First off, you need to clear focus if another EditText gets focus. This can be done with myEditText.clearFocus(). Then in your onFocusChangeListener you shouldn't really care if first EditText has focus or not, so the onFocusChangeListener could look something like this:

public class MainActivity extends Activity implements OnFocusChangeListener {
    private EditText editText1, editText2;

    @Override
    protected void onCreate(Bundle savedInstanceState) {
        super.onCreate(savedInstanceState);
        setContentView(R.layout.activity_main);

        editText1 = (EditText) findViewById(R.id.editText1);
        editText1.setOnFocusChangeListener(this);
        editText2 = (EditText) findViewById(R.id.editText2);
        editText2.setOnFocusChangeListener(this);
    }

    @Override
    public void onFocusChange(View v, boolean hasFocus) {
        String liganame = editText1.getText().toString();

        if(liganame.length() == 0) {
            if(editText1.requestFocus()) {
                getWindow().setSoftInputMode(WindowManager.LayoutParams.SOFT_INPUT_STATE_ALWAYS_VISIBLE);
                editText2.clearFocus();
                Toast.makeText(MainActivity.this, "Dieser Liganame ist bereits vergeben", Toast.LENGTH_SHORT).show();
            }
        }
    }
}

Replace the first check if(liganame.length() == 0) with your own check, then it should work. Take note, that all the EditText views should have set their onFocusChangeListener to the same listener like I've done in the example.

***LOGIN script that doesnt link to a database or external file. Good for a global password -

Place on Login form page - place this at the top of the login page - above everything else***

<?php

if(isset($_POST['Login'])){

if(strtolower($_POST["username"])=="ChangeThis" && $_POST["password"]=="ChangeThis"){
session_start();
$_SESSION['logged_in'] = TRUE;
header("Location: ./YourPageAfterLogin.php");

}else {
$error= "Login failed !";
}
}
//print"version3<br>";
//print"username=".$_POST["username"]."<br>";
//print"password=".$_POST["username"];
?>

*Login on following pages - Place this at the top of every page that needs to be protected by login. this checks the session and if a user name and password has *

<?php
session_start();
if(!isset($_SESSION['logged_in']) OR $_SESSION['logged_in'] != TRUE){

header("Location: ./YourLoginPage.php");
}
?>

As others have said, there is no way to do a single line comment legally in XML that comments out multiple lines, but, there are ways to make commenting out segments of XML easier.

Looking at the example below, if you add '>' to line one, the XmlTag will be uncommented. Remove the '>' and it's commented out again. This is the simplest way that I've seen to quickly comment/uncomment XML without breaking things.

<!-- --
<XmlTag variable="0" />
<!-- -->

The added benefit is that you only manipulate the top comment, and the bottom comment can just sit there forever. This breaks compatibility with SGML and some XML parsers will barf on it. So long as this isn't a permanent fixture in your XML, and your parsers accept it, it's not really a problem.

Stack Overflow's and Notepad++'s syntax highlighter treat it like a multi-line comment, C++'s Boost library treats it as a multi-line comment, and the only parser I've found so far that breaks is the one in .NET, specifically C#. So, be sure to first test that your tools, IDE, libraries, language, etc. accept it before using it.

If you care about SGML compatibility, simply use this instead:

<!-- -
<XmlTag variable="0" />
<!- -->

Add '->' to the top comment and a '-' to the bottom comment. The downside is having to edit the bottom comment each time, which would probably make it easier to just type in <!-- at the top and --> at the bottom each time.

I also want to mention that other commenters recommend using an XML editor that allows you to right-click and comment/uncomment blocks of XML, which is probably preferable over fancy find/replace tricks (it would also make for a good answer in itself, but I've never used such tools. I just want to make sure the information isn't lost over time). I've personally never had to deal with XML enough to justify having an editor fancier than Notepad++, so this is totally up to you.

Open command prompt as admin and write :

bcdedit /set hypervisorlaunchtype off

will I get the same results?

Not really. I don't know of a workaround for PHP 5.2, though.

What is the difference between new self and new static?

self refers to the same class in which the new keyword is actually written.

static, in PHP 5.3's late static bindings, refers to whatever class in the hierarchy you called the method on.

In the following example, B inherits both methods from A. The self invocation is bound to A because it's defined in A's implementation of the first method, whereas static is bound to the called class (also see get_called_class()).

class A {
    public static function get_self() {
        return new self();
    }

    public static function get_static() {
        return new static();
    }
}

class B extends A {}

echo get_class(B::get_self());  // A
echo get_class(B::get_static()); // B
echo get_class(A::get_self()); // A
echo get_class(A::get_static()); // A

Please be aware that the warning on iTunes Connect does not say anything about the limit being only for over-the-air delivery. It would be preferable if the warning mentioned this.

Try this tutorial it has the explanation and it will be helpful http://www.ccs.neu.edu/home/kathleen/classes/cs3200/JDBCtutorial.pdf

While you can't kill all open connections with a single command, you can create a set of queries to do that for you if there are too many to do by hand.

This example will create a series of KILL <pid>; queries for all some_user's connections from 192.168.1.1 to my_db.

SELECT 
CONCAT('KILL ', id, ';') 
FROM INFORMATION_SCHEMA.PROCESSLIST 
WHERE `User` = 'some_user' 
AND `Host` = '192.168.1.1';
AND `db` = 'my_db';

As an alternative option you could install OpenSSH http://www.mls-software.com/opensshd.html and then simply ssh user@host -pw password -m command_run

Edit: After a response from user2687375 when installing, select client only. Once this is done you should be able to initiate SSH from command.

Then you can create an ssh batch script such as

ECHO OFF
CLS
:MENU
ECHO.
ECHO ........................
ECHO SSH servers
ECHO ........................
ECHO.
ECHO 1 - Web Server 1
ECHO 2 - Web Server 2
ECHO E - EXIT
ECHO.

SET /P M=Type 1 - 2 then press ENTER:
IF %M%==1 GOTO WEB1
IF %M%==2 GOTO WEB2
IF %M%==E GOTO EOF

REM ------------------------------
REM SSH Server details
REM ------------------------------

:WEB1
CLS
call ssh [email protected]
cmd /k

:WEB2
CLS
call ssh [email protected]
cmd /k

I have noticed that when using type="image/vnd.microsoft.icon", the favicon fails to appear when the browser is not connected to the internet. But type="image/x-icon" works whether the browser can connect to the internet, or not. When developing, at times I am not connected to the internet.

The .first() will help here

$('p:contains("hello")').first().css('font-weight', 'bold');

Short answer for dummies like me (stolen from Torek):

• origin/master is "where master was over there last time I checked"
• master is "where master is over here based on what I have been doing"

Try this

Authentication authentication = SecurityContextHolder.getContext().getAuthentication();
String userName = authentication.getName();

Using Integer.toHexString(...) is a good answer. But personally prefer to use String.format(...).

Try this sample as a test.

byte[] values = new byte[64];
Arrays.fill(values, (byte)8);  //Fills array with 8 just for test
String valuesStr = "";
for(int i = 0; i < values.length; i++)
    valuesStr += String.format("0x%02x", values[i] & 0xff) + " ";
valuesStr.trim();

Use:

dateTimePicker.Value.ToString("yyyy/MM/dd")

Refer to the following link:

http://www.vbdotnetforums.com/schedule-time/15001-datetimepicker-format.html

Here is another one, a one liner which does not reassign the value:

$("#inp").focus()[0].setSelectionRange(99999, 99999);

I struggle with the same error for hours, but I was able to solve it. I installed multer and aws-sdk as a devDependencies by mistake, instead of just dependencies. So, anyone who has the same error, just double-check your package.json file.

Also, a small tip for the property of the engine in package.json.

enter code here
//The greater or equal operators will make sure that you use the right node 
//version 
//even if your current node is greater version than npm node

"engines": {
"node": ">= 0.8.14"
},


//insted of
"engines": {
  "node": "0.8.14"
}

Include the following code into a class in your project:

    [DllImport("kernel32.dll", SetLastError = true, CallingConvention = CallingConvention.Winapi)]
    [return: MarshalAs(UnmanagedType.Bool)]
    private static extern bool IsWow64Process([In] IntPtr hProcess, [Out] out bool wow64Process);

    public static int GetBit()
    {
        int MethodResult = "";
        try
        {
            int Architecture = 32;

            if ((Environment.OSVersion.Version.Major == 5 && Environment.OSVersion.Version.Minor >= 1) || Environment.OSVersion.Version.Major >= 6)
            {
                using (Process p = Process.GetCurrentProcess())
                {
                    bool Is64Bit;

                    if (IsWow64Process(p.Handle, out Is64Bit))
                    {
                        if (Is64Bit)
                        {
                            Architecture = 64;

                        }

                    }

                }

            }

            MethodResult = Architecture;

        }
        catch //(Exception ex)
        {
            //ex.HandleException();
        }
        return MethodResult;
    }

Use it like so:

string Architecture = "This is a " + GetBit() + "bit machine";

Check out this solution VBA Compact Current Database.

Basically it says this should work

Public Sub CompactDB() 
    CommandBars("Menu Bar").Controls("Tools").Controls ("Database utilities"). _
    Controls("Compact and repair database...").accDoDefaultAction 
End Sub 

A typical best practice is not using long/int/short directly. Instead, according to specification of compilers and OS, wrap them into a header file to ensure they hold exactly the amount of bits that you want. Then use int8/int16/int32 instead of long/int/short. For example, on 32bit Linux, you could define a header like this

typedef char int8;
typedef short int16;
typedef int int32;
typedef unsigned int uint32;

I tend to use yield-return when I calculate the next item in the list (or even the next group of items).

Using your Version 2, you must have the complete list before returning. By using yield-return, you really only need to have the next item before returning.

Among other things, this helps spread the computational cost of complex calculations over a larger time-frame. For example, if the list is hooked up to a GUI and the user never goes to the last page, you never calculate the final items in the list.

Another case where yield-return is preferable is if the IEnumerable represents an infinite set. Consider the list of Prime Numbers, or an infinite list of random numbers. You can never return the full IEnumerable at once, so you use yield-return to return the list incrementally.

In your particular example, you have the full list of products, so I'd use Version 2.

Update for Xcode 8.3

This no longer works in Xcode 8.3. It appears to be related to Apple's move to automate provisioning profile and certificate generation:

The simplest "solution" (or workaround) is to make sure Xcode is closed, then via Terminal:

rm ~/Library/MobileDevice/Provisioning\ Profiles/*.mobileprovision  

In Xcode 7 & 8:

1. Open Preferences > Accounts

2. Select your apple ID from the list

3. On the right-hand side, select the team your provisioning profile belongs to

4. Click View Details

5. Under Provisioning Profiles, right-click the one you want to delete and select Move to Trash:

   

You can now, using React hooks

Using react hooks, you can now call useState() in your function component.

useState() will return an array of 2 things:

1. A value, representing the current state.
2. Its setter. Use it to update the value.

Updating the value by its setter will force your function component to re-render,
just like forceUpdate does:

import React, { useState } from 'react';

//create your forceUpdate hook
function useForceUpdate(){
    const [value, setValue] = useState(0); // integer state
    return () => setValue(value => value + 1); // update the state to force render
}

function MyComponent() {
    // call your hook here
    const forceUpdate = useForceUpdate();
    
    return (
        <div>
            {/*Clicking on the button will force to re-render like force update does */}
            <button onClick={forceUpdate}>
                Click to re-render
            </button>
        </div>
    );
}

You can find a demo here.

The component above uses a custom hook function (useForceUpdate) which uses the react state hook useState. It increments the component's state's value and thus tells React to re-render the component.

EDIT

In an old version of this answer, the snippet used a boolean value, and toggled it in forceUpdate(). Now that I've edited my answer, the snippet use a number rather than a boolean.

Why ? (you would ask me)

Because once it happened to me that my forceUpdate() was called twice subsequently from 2 different events, and thus it was reseting the boolean value at its original state, and the component never rendered.

This is because in the useState's setter (setValue here), React compare the previous state with the new one, and render only if the state is different.

Use this function:

function apache_module_exists($module)
{
    return in_array($module, apache_get_modules());
}

The function strip will remove whitespace from the beginning and end of a string.

my_str = "   text "
my_str = my_str.strip()

will set my_str to "text".

For users of IntelliJ IDEA or Android Studio make these steps:
* From the menu Build/Generate signed APK
* You need to create a keystore path. From the dialog click Create new. You will create a jks file that includes your keys. Select folder, define a password. So your keystore ok.
* Create new key by for your application by using alias, key password, your name etc.
* Click next.
* From the dialog either select Proguard or not.

Your signed APK file is ready.

Help file: https://www.jetbrains.com/idea/webhelp/generate-signed-apk-wizard.html

Distinct of column along with aggregations on other columns

To get the distinct number of values for any column (CLIENTCODE in your case), we can use nunique. We can pass the input as a dictionary in agg function, along with aggregations on other columns:

grp_df = df.groupby('YEARMONTH').agg({'CLIENTCODE': ['nunique'],
                                      'other_col_1': ['sum', 'count']})

# to flatten the multi-level columns
grp_df.columns = ["_".join(col).strip() for col in grp_df.columns.values]

# if you wish to reset the index
grp_df.reset_index(inplace=True)

Works for me too, here is a better solution::

fiddle demo

<form id="myForm">
  <input type="radio" name="radioName" value="1" />one<br />
  <input type="radio" name="radioName" value="2" />two 
</form>

<script>
$('#myForm input[type=radio]').change(function() {       
    alert(this.value);
});
</script>

You must make sure that you initialized jquery above all other imports and javascript functions. Because $ is a jquery function. Even

$(function(){
 <code>
}); 

will not check jquery initialised or not. It will ensure that <code> will run only after all the javascripts are initialized.

Anything in the public folder is accessible at the root path (/) so change your img tag to read:

<img src="/images/rss.jpg" alt="rss feed" />

If you wanted to use a rails tag, use this:

<%= image_tag("rss.jpg", :alt => "rss feed") %>

There are a lot of answers here. The code shows how we can create an Exception, how we can use that exception in our methods, and finally, how you can verify in a unit test, the correct exceptions being raised.

import unittest

class DeviceException(Exception):
    def __init__(self, msg, code):
        self.msg = msg
        self.code = code
    def __str__(self):
        return repr("Error {}: {}".format(self.code, self.msg))

class MyDevice(object):
    def __init__(self):
        self.name = 'DefaultName'

    def setParameter(self, param, value):
        if isinstance(value, str):
            setattr(self, param , value)
        else:
            raise DeviceException('Incorrect type of argument passed. Name expects a string', 100001)

    def getParameter(self, param):
        return getattr(self, param)

class TestMyDevice(unittest.TestCase):

    def setUp(self):
        self.dev1 = MyDevice()

    def tearDown(self):
        del self.dev1

    def test_name(self):
        """ Test for valid input for name parameter """

        self.dev1.setParameter('name', 'MyDevice')
        name = self.dev1.getParameter('name')
        self.assertEqual(name, 'MyDevice')

    def test_invalid_name(self):
        """ Test to check if error is raised if invalid type of input is provided """

        self.assertRaises(DeviceException, self.dev1.setParameter, 'name', 1234)

    def test_exception_message(self):
        """ Test to check if correct exception message and code is raised when incorrect value is passed """

        with self.assertRaises(DeviceException) as cm:
            self.dev1.setParameter('name', 1234)
        self.assertEqual(cm.exception.msg, 'Incorrect type of argument passed. Name expects a string', 'mismatch in expected error message')
        self.assertEqual(cm.exception.code, 100001, 'mismatch in expected error code')


if __name__ == '__main__':
    unittest.main()

Declaration

A prototype for a function which takes a function parameter looks like the following:

void func ( void (*f)(int) );

This states that the parameter f will be a pointer to a function which has a void return type and which takes a single int parameter. The following function (print) is an example of a function which could be passed to func as a parameter because it is the proper type:

void print ( int x ) {
  printf("%d\n", x);
}

Function Call

When calling a function with a function parameter, the value passed must be a pointer to a function. Use the function's name (without parentheses) for this:

func(print);

would call func, passing the print function to it.

Function Body

As with any parameter, func can now use the parameter's name in the function body to access the value of the parameter. Let's say that func will apply the function it is passed to the numbers 0-4. Consider, first, what the loop would look like to call print directly:

for ( int ctr = 0 ; ctr < 5 ; ctr++ ) {
  print(ctr);
}

Since func's parameter declaration says that f is the name for a pointer to the desired function, we recall first that if f is a pointer then *f is the thing that f points to (i.e. the function print in this case). As a result, just replace every occurrence of print in the loop above with *f:

void func ( void (*f)(int) ) {
  for ( int ctr = 0 ; ctr < 5 ; ctr++ ) {
    (*f)(ctr);
  }
}

Source

@ResponseBody
@RequestMapping(value="/get-text", produces="text/plain")
public String myMethod() {
     return "Response!";
}

• You see that @ResponseBody ?

It's telling that the method returns some text and not to interpret it as a view etc.

• You see that produces="text/plain" ?

It's just a good practice as it tells what will be returned from the method :)

use if var is null

It seems that you are looking to parse commandline arguments into your bash script. I have searched for this recently myself. I came across the following which I think will assist you in parsing the arguments:

http://rsalveti.wordpress.com/2007/04/03/bash-parsing-arguments-with-getopts/

I added the snippet below as a tl;dr

#using : after a switch variable means it requires some input (ie, t: requires something after t to validate while h requires nothing.
while getopts “ht:r:p:v” OPTION
do
     case $OPTION in
         h)
             usage
             exit 1
             ;;
         t)
             TEST=$OPTARG
             ;;
         r)
             SERVER=$OPTARG
             ;;
         p)
             PASSWD=$OPTARG
             ;;
         v)
             VERBOSE=1
             ;;
         ?)
             usage
             exit
             ;;
     esac
done

if [[ -z $TEST ]] || [[ -z $SERVER ]] || [[ -z $PASSWD ]]
then
     usage
     exit 1
fi

./script.sh -t test -r server -p password -v

In your screenshot, you didn't specify any module: try setting "libsystem_c.dylib"

I did that, and it works : breakpoint stops here (although the stacktrace often rise from some obscure system lib...)

I got the same error when trying to decrypt the key from a different user account via su - <otherUser>. (Like jayhendren suggests in his answer)

In my case, this happened because there would normally start a graphical pinentry prompt so I could enter the password to decrypt the key, but the su -ed to user had no access to the (graphical) X-Window-System that was currently running.

The solution was to simply issue in that same console (as the user under which the X Server was currently running):

xhost +local:

Which gives other local users access to the currently running (local) X-Server. After that, the pinentry prompt appeared, I could enter the password to decrypt the key and it worked...

Of course you can also forward X over ssh connections. For this look into ssh's -X parameter (client side) and X11Forwarding yes (server side).

Another Variation can be... Be sure to close the file afterwards

import sys
file = open('output.txt', 'a')
sys.stdout = file

print("Hello stackoverflow!") 
print("I have a question.")

file.close()

Input String

[
   {
      "userName": "sandeep",
      "age": 30
   }, 
   {
      "userName": "vivan",
      "age": 5
   }
]

Simple Way to Convert String to JSON

public class Test
{

    public static void main(String[] args) throws JSONException
    {
        String data = "[{\"userName\": \"sandeep\",\"age\":30},{\"userName\": \"vivan\",\"age\":5}]  ";
        JSONArray jsonArr = new JSONArray(data);

        for (int i = 0; i < jsonArr.length(); i++)
        {
            JSONObject jsonObj = jsonArr.getJSONObject(i);

            System.out.println(jsonObj);
        }

    }
}

Output

{"userName":"sandeep","age":30}
{"userName":"vivan","age":5}

Using Yoo's answer, put this in your ~/.bashrc:

sudoe() {
    [[ "$#" -ne 2 ]] && echo "Usage: sudoe <text> <file>" && return 1
    echo "$1" | sudo tee --append "$2" > /dev/null
}

Now you can run sudoe 'deb blah # blah' /etc/apt/sources.list

Edit:

A more complete version which allows you to pipe input in or redirect from a file and includes a -a switch to turn off appending (which is on by default):

sudoe() {
  if ([[ "$1" == "-a" ]] || [[ "$1" == "--no-append" ]]); then
    shift &>/dev/null || local failed=1
  else
    local append="--append"
  fi

  while [[ $failed -ne 1 ]]; do
    if [[ -t 0 ]]; then
      text="$1"; shift &>/dev/null || break
    else
      text="$(cat <&0)"
    fi

    [[ -z "$1" ]] && break
    echo "$text" | sudo tee $append "$1" >/dev/null; return $?
  done

  echo "Usage: $0 [-a|--no-append] [text] <file>"; return 1
}

ALTER TABLE MyTable MODIFY Col3 varchar(20) NULL;

.toLowerCase function only exists on strings. You can call toString() on anything in javascript to get a string representation. Putting this all together:

var ans = 334;
var temp = ans.toString().toLowerCase();
alert(temp);

this in JS:

The value of this in JS is 100% determined by how a function is called, and not how it is defined. We can relatively easily find the value of this by the 'left of the dot rule':

1. When the function is created using the function keyword the value of this is the object left of the dot of the function which is called
2. If there is no object left of the dot then the value of this inside a function is often the global object (global in node, window in browser). I wouldn't recommend using the this keyword here because it is less explicit than using something like window!
3. There exist certain constructs like arrow functions and functions created using the Function.prototype.bind() a function that can fix the value of this. These are exceptions of the rule but are really helpful to fix the value of this.

Example in nodeJS

module.exports.data = 'module data';
// This outside a function in node refers to module.exports object
console.log(this);

const obj1 = {
    data: "obj1 data",
    met1: function () {
        console.log(this.data);
    },
    met2: () => {
        console.log(this.data);
    },
};

const obj2 = {
    data: "obj2 data",
    test1: function () {
        console.log(this.data);
    },
    test2: function () {
        console.log(this.data);
    }.bind(obj1),
    test3: obj1.met1,
    test4: obj1.met2,
};

obj2.test1();
obj2.test2();
obj2.test3();
obj2.test4();
obj1.met1.call(obj2);

Output:

Let me walk you through the outputs 1 by 1 (ignoring the first log starting from the second):

1. this is obj2 because of the left of the dot rule, we can see how test1 is called obj2.test1();. obj2 is left of the dot and thus the this value.
2. Even though obj2 is left of the dot, test2 is bound to obj1 via the bind() method. So the this value is obj1.
3. obj2 is left of the dot from the function which is called: obj2.test3(). Therefore obj2 will be the value of this.
4. In this case: obj2.test4() obj2 is left of the dot. However, arrow functions don't have their own this binding. Therefore it will bind to the this value of the outer scope which is the module.exports an object which was logged in the beginning.
5. We can also specify the value of this by using the call function. Here we can pass in the desired this value as an argument, which is obj2 in this case.

You can get through every object in the list and get which value you want. Just pass an object as first parameter in the function call and object property which you want as second parameter. Change object with your object.

const treeData = [{_x000D_
        "jssType": "fieldset",_x000D_
        "jssSelectLabel": "Fieldset (with legend)",_x000D_
        "jssSelectGroup": "jssItem",_x000D_
        "jsName": "fieldset-715",_x000D_
        "jssLabel": "Legend",_x000D_
        "jssIcon": "typcn typcn-folder",_x000D_
        "expanded": true,_x000D_
        "children": [{_x000D_
                "jssType": "list-ol",_x000D_
                "jssSelectLabel": "List - ol",_x000D_
                "jssSelectGroup": "jssItem",_x000D_
                "jsName": "list-ol-147",_x000D_
                "jssLabel": "",_x000D_
                "jssIcon": "dashicons dashicons-editor-ol",_x000D_
                "noChildren": false,_x000D_
                "expanded": true,_x000D_
                "children": [{_x000D_
                        "jssType": "list-li",_x000D_
                        "jssSelectLabel": "List Item - li",_x000D_
                        "jssSelectGroup": "jssItem",_x000D_
                        "jsName": "list-li-752",_x000D_
                        "jssLabel": "",_x000D_
                        "jssIcon": "dashicons dashicons-editor-ul",_x000D_
                        "noChildren": false,_x000D_
                        "expanded": true,_x000D_
                        "children": [{_x000D_
                            "jssType": "text",_x000D_
                            "jssSelectLabel": "Text (short text)",_x000D_
                            "jssSelectGroup": "jsTag",_x000D_
                            "jsName": "text-422",_x000D_
                            "jssLabel": "Your Name (required)",_x000D_
                            "jsRequired": true,_x000D_
                            "jsTagOptions": [{_x000D_
                                    "jsOption": "",_x000D_
                                    "optionLabel": "Default value",_x000D_
                                    "optionType": "input"_x000D_
                                },_x000D_
                                {_x000D_
                                    "jsOption": "placeholder",_x000D_
                                    "isChecked": false,_x000D_
                                    "optionLabel": "Use this text as the placeholder of the field",_x000D_
                                    "optionType": "checkbox"_x000D_
                                },_x000D_
                                {_x000D_
                                    "jsOption": "akismet_author_email",_x000D_
                                    "isChecked": false,_x000D_
                                    "optionLabel": "Akismet - this field requires author's email address",_x000D_
                                    "optionType": "checkbox"_x000D_
                                }_x000D_
                            ],_x000D_
                            "jsValues": "",_x000D_
                            "jsPlaceholder": false,_x000D_
                            "jsAkismetAuthor": false,_x000D_
                            "jsIdAttribute": "",_x000D_
                            "jsClassAttribute": "",_x000D_
                            "jssIcon": "typcn typcn-sort-alphabetically",_x000D_
                            "noChildren": true_x000D_
                        }]_x000D_
                    },_x000D_
                    {_x000D_
                        "jssType": "list-li",_x000D_
                        "jssSelectLabel": "List Item - li",_x000D_
                        "jssSelectGroup": "jssItem",_x000D_
                        "jsName": "list-li-538",_x000D_
                        "jssLabel": "",_x000D_
                        "jssIcon": "dashicons dashicons-editor-ul",_x000D_
                        "noChildren": false,_x000D_
                        "expanded": true,_x000D_
                        "children": [{_x000D_
                            "jssType": "email",_x000D_
                            "jssSelectLabel": "Email",_x000D_
                            "jssSelectGroup": "jsTag",_x000D_
                            "jsName": "email-842",_x000D_
                            "jssLabel": "Email Address (required)",_x000D_
                            "jsRequired": true,_x000D_
                            "jsTagOptions": [{_x000D_
                                    "jsOption": "",_x000D_
                                    "optionLabel": "Default value",_x000D_
                                    "optionType": "input"_x000D_
                                },_x000D_
                                {_x000D_
                                    "jsOption": "placeholder",_x000D_
                                    "isChecked": false,_x000D_
                                    "optionLabel": "Use this text as the placeholder of the field",_x000D_
                                    "optionType": "checkbox"_x000D_
                                },_x000D_
                                {_x000D_
                                    "jsOption": "akismet_author_email",_x000D_
                                    "isChecked": false,_x000D_
                                    "optionLabel": "Akismet - this field requires author's email address",_x000D_
                                    "optionType": "checkbox"_x000D_
                                }_x000D_
                            ],_x000D_
                            "jsValues": "",_x000D_
                            "jsPlaceholder": false,_x000D_
                            "jsAkismetAuthorEmail": false,_x000D_
                            "jsIdAttribute": "",_x000D_
                            "jsClassAttribute": "",_x000D_
                            "jssIcon": "typcn typcn-mail",_x000D_
                            "noChildren": true_x000D_
                        }]_x000D_
                    },_x000D_
                    {_x000D_
                        "jssType": "list-li",_x000D_
                        "jssSelectLabel": "List Item - li",_x000D_
                        "jssSelectGroup": "jssItem",_x000D_
                        "jsName": "list-li-855",_x000D_
                        "jssLabel": "",_x000D_
                        "jssIcon": "dashicons dashicons-editor-ul",_x000D_
                        "noChildren": false,_x000D_
                        "expanded": true,_x000D_
                        "children": [{_x000D_
                            "jssType": "textarea",_x000D_
                            "jssSelectLabel": "Textarea (long text)",_x000D_
                            "jssSelectGroup": "jsTag",_x000D_
                            "jsName": "textarea-217",_x000D_
                            "jssLabel": "Your Message",_x000D_
                            "jsRequired": false,_x000D_
                            "jsTagOptions": [{_x000D_
                                    "jsOption": "",_x000D_
                                    "optionLabel": "Default value",_x000D_
                                    "optionType": "input"_x000D_
                                },_x000D_
                                {_x000D_
                                    "jsOption": "placeholder",_x000D_
                                    "isChecked": false,_x000D_
                                    "optionLabel": "Use this text as the placeholder of the field",_x000D_
                                    "optionType": "checkbox"_x000D_
                                }_x000D_
                            ],_x000D_
                            "jsValues": "",_x000D_
                            "jsPlaceholder": false,_x000D_
                            "jsIdAttribute": "",_x000D_
                            "jsClassAttribute": "",_x000D_
                            "jssIcon": "typcn typcn-document-text",_x000D_
                            "noChildren": true_x000D_
                        }]_x000D_
                    }_x000D_
                ]_x000D_
            },_x000D_
            {_x000D_
                "jssType": "paragraph",_x000D_
                "jssSelectLabel": "Paragraph - p",_x000D_
                "jssSelectGroup": "jssItem",_x000D_
                "jsName": "paragraph-993",_x000D_
                "jssContent": "* Required",_x000D_
                "jssIcon": "dashicons dashicons-editor-paragraph",_x000D_
                "noChildren": true_x000D_
            }_x000D_
        ]_x000D_
        _x000D_
    },_x000D_
    {_x000D_
        "jssType": "submit",_x000D_
        "jssSelectLabel": "Submit",_x000D_
        "jssSelectGroup": "jsTag",_x000D_
        "jsName": "submit-704",_x000D_
        "jssLabel": "Send",_x000D_
        "jsValues": "",_x000D_
        "jsRequired": false,_x000D_
        "jsIdAttribute": "",_x000D_
        "jsClassAttribute": "",_x000D_
        "jssIcon": "typcn typcn-mail",_x000D_
        "noChildren": true_x000D_
    },_x000D_
    _x000D_
];_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
 function findObjectByLabel(obj, label) {_x000D_
       for(var elements in obj){_x000D_
           if (elements === label){_x000D_
                console.log(obj[elements]);_x000D_
           }_x000D_
            if(typeof obj[elements] === 'object'){_x000D_
            findObjectByLabel(obj[elements], 'jssType');_x000D_
           }_x000D_
          _x000D_
       }_x000D_
};_x000D_
_x000D_
 findObjectByLabel(treeData, 'jssType');

Another reason of this problem can be column type of "payload" sessions table. If you have huge data on session, a text column wouldn't be enough. You will need MEDIUMTEXT or even LONGTEXT.

You want to set style

margin: auto;

And remove the positioning styles (top, left, position)

I know this will center horrizontaly but I'm not sure about vertical!

https://docs.angularjs.org/guide/$location#html-link-rewriting

In cases like the following, links are not rewritten; instead, the browser will perform a full page reload to the original link.

• Links that contain target element Example:
  <a href="/ext/link?a=b" target="_self">link</a>

• Absolute links that go to a different domain Example:
  <a href="http://angularjs.org/">link</a>

• Links starting with '/' that lead to a different base path when base is defined Example:
  <a href="/not-my-base/link">link</a>

So in your case, you should add a target attribute like so...

<a target="_self" href="example.com/uploads/asd4a4d5a.pdf" download="foo.pdf">

</html>
<head>
  <title>Nick Benvenuti</title>
  <link rel="icon" href="img/xicon.jpg" type="image/x-icon/">
  <link rel="stylesheet" href="CSS/main.css">
  <link rel="stylesheet" href="CSS/normalize.css">
  <script src="JS/jquery-1.12.0.min.js" type="text/javascript"></script>
</head>
<body>
<div id="phplogger">
  <script type="text/javascript">
  function tester() {
  window.location.href="admin.php";
  }
  function phpshower() {
  document.getElementById("phplogger").classList.toggle('shower');
  document.getElementById("phplogger").classList.remove('hider');
  }
  function phphider() {
  document.getElementById("phplogger").classList.toggle('hider');
  document.getElementById("phplogger").classList.remove('shower');
  }
</script>
<?php 
//if "login" variable is filled out, send email
  if (isset($_REQUEST['login']))  {

  //Login info
  $passbox = $_REQUEST['login'];
  $password = 'blahblahyoudontneedtoknowmypassword';

  //Login
  if($passbox == $password) {

  //Login response
  echo "<script text/javascript> phphider(); </script>";
  }
 }
?>
<div align="center" margin-top="50px">
<h1>Administrative Access Only</h1>
<h2>Log In:</h2>
 <form method="post">
  Password: <input name="login" type="text" /><br />
  <input type="submit" value="Login" id="submit-button" />
  </form>
</div>
</div>
<div align="center">
<p>Welcome to the developers and admins page!</p>
</div>
</body>
</html>

Basically what I did here is make a page all in one php file where when you enter the password if its right it will hide the password screen and bring the stuff that protected forward. and then heres the css which is a crucial part because it makes the classes that hide and show the different parts of the page.

  /*PHP CONTENT STARTS HERE*/
  .hider {
  visibility:hidden;
  display:none;
  }

  .shower {
  visibility:visible;
  }

  #phplogger {
  background-color:#333;
  color:blue;
  position:absolute;
  height:100%;
  width:100%;
  margin:0;
  top:0;
  bottom:0;
  }
  /*PHP CONTENT ENDS HERE*/

You don't import scripts in Python you import modules. Some python modules are also scripts that you can run directly (they do some useful work at a module-level).

In general it is preferable to use absolute imports rather than relative imports.

toplevel_package/
+-- __init__.py
+-- moduleA.py
+-- subpackage
    +-- __init__.py
    +-- moduleB.py

In moduleB:

from toplevel_package import moduleA

If you'd like to run moduleB.py as a script then make sure that parent directory for toplevel_package is in your sys.path.

I had a really similar issue using HIVE in EMR. None of the extant solutions worked for me -- ie, none of the mapreduce configurations worked for me; and neither did setting yarn.nodemanager.vmem-check-enabled to false.

However, what ended up working was setting tez.am.resource.memory.mb, for example:

hive -hiveconf tez.am.resource.memory.mb=4096

Another setting to consider tweaking is yarn.app.mapreduce.am.resource.mb

Most of the answers are/were valid. The new JAVA API modification for Date handling made sure that some earlier ambiguity in java date handling is reduced.

You will get a deprecated message for similar calls.

new Date() // deprecated

The above call had the developer to assume that a new Date object will give the Date object with current timestamp. This behavior is not consistent across other Java API classes.

The new way of doing this is using the Calendar Instance.

new SimpleDateFormat("yyyy-MM-dd").format(Calendar.getInstance().getTime()

Here too the naming convention is not perfect but this is much organised. For a person like me who has a hard time mugging up things but would never forget something if it sounds/appears logical, this is a good approach.

This is more synonymous to real life

1. We get a Calendar object and we look for the time in it. ( you must be wondering no body gets time from a Calendar, that is why I said it is not perfect.But that is a different topic altogether)
2. Then we want the date in a simple Text format so we use a SimpleDateFormat utility class which helps us in formatting the Date from Step 1. I have used yyyy, MM ,dd as parameters in the format. Supported date format parameters

One more way to do this is using Joda time API

new DateTime().toString("yyyy-MM-dd")

or the much obvious

new DateTime(Calendar.getInstance().getTime()).toString("yyyy-MM-dd")

both will return the same result.

Change var data = 'id='+ id & 'name='+ name; as below,

use this instead.....

var data = "id="+ id + "&name=" + name;

this will going to work fine:)

For those who use com.nhaarman.mockitokotlin2.mock {}

This error occurs when, for example, we create a mock inside another mock

mock {
    on { x() } doReturn mock {
        on { y() } doReturn z()
    }
}

The solution to this is to create the child mock in a variable and use the variable in the scope of the parent mock to prevent the mock creation from being explicitly nested.

val liveDataMock = mock {
        on { y() } doReturn z()
}
mock {
    on { x() } doReturn liveDataMock
}

GL

If you don't want to convert the entire Map into an array beforehand, and/or destructure key-value arrays, you can use this silly function:

/**_x000D_
 * Map over an ES6 Map._x000D_
 *_x000D_
 * @param {Map} map_x000D_
 * @param {Function} cb Callback. Receives two arguments: key, value._x000D_
 * @returns {Array}_x000D_
 */_x000D_
function mapMap(map, cb) {_x000D_
  let out = new Array(map.size);_x000D_
  let i = 0;_x000D_
  map.forEach((val, key) => {_x000D_
    out[i++] = cb(key, val);_x000D_
  });_x000D_
  return out;_x000D_
}_x000D_
_x000D_
let map = new Map([_x000D_
  ["a", 1],_x000D_
  ["b", 2],_x000D_
  ["c", 3]_x000D_
]);_x000D_
_x000D_
console.log(_x000D_
  mapMap(map, (k, v) => `${k}-${v}`).join(', ')_x000D_
); // a-1, b-2, c-3

Here is the swift version (by using @Nitesh Borad objective C code) :-

   if let img: UIImage = UIImage(data: previewImg[indexPath.row]) {
                cell.cardPreview.image = img
            } else {
                // The image isn't cached, download the img data
                // We should perform this in a background thread
                let imgURL = NSURL(string: "webLink URL")
                let request: NSURLRequest = NSURLRequest(URL: imgURL!)
                let session = NSURLSession.sharedSession()
                let task = session.dataTaskWithRequest(request, completionHandler: {data, response, error -> Void in
                    let error = error
                    let data = data
                    if error == nil {
                        // Convert the downloaded data in to a UIImage object
                        let image = UIImage(data: data!)
                        // Store the image in to our cache
                        self.previewImg[indexPath.row] = data!
                        // Update the cell
                        dispatch_async(dispatch_get_main_queue(), {
                            if let cell: YourTableViewCell = tableView.cellForRowAtIndexPath(indexPath) as? YourTableViewCell {
                                cell.cardPreview.image = image
                            }
                        })
                    } else {
                        cell.cardPreview.image = UIImage(named: "defaultImage")
                    }
                })
                task.resume()
            }

The reason reset and revert tend to come up a lot in the same conversations is because different version control systems use them to mean different things.

In particular, people who are used to SVN or P4 who want to throw away uncommitted changes to a file will often reach for revert before being told that they actually want reset.

Similarly, the revert equivalent in other VCSes is often called rollback or something similar - but "rollback" can also mean "I want to completely discard the last few commits", which is appropriate for reset but not revert. So, there's a lot of confusion where people know what they want to do, but aren't clear on which command they should be using for it.

As for your actual questions about revert...

Okay, you're going to use git revert but how?

git revert first-bad-commit..last-bad-commit

And after running git revert do you have to do something else after? Do you have to commit the changes revert made or does revert directly commit to the repo or what??

By default, git revert prompts you for a commit message and then commits the results. This can be overridden. I quote the man page:

--edit

With this option, git revert will let you edit the commit message prior to committing the revert. This is the default if you run the command from a terminal.

--no-commit

Usually the command automatically creates some commits with commit log messages stating which commits were reverted. This flag applies the changes necessary to revert the named commits to your working tree and the index, but does not make the commits. In addition, when this option is used, your index does not have to match the HEAD commit. The revert is done against the beginning state of your index.

This is useful when reverting more than one commits' effect to your index in a row.

In particular, by default it creates a new commit for each commit you're reverting. You can use revert --no-commit to create changes reverting all of them without committing those changes as individual commits, then commit at your leisure.

Add the following to your .htaccess

AddType font/woff woff

good luck

I have summed up all the suggestions and here is the universal and short answer to this question:

if(url.match('http://(www.)?youtube|youtu\.be')){
    youtube_id=url.split(/v\/|v=|youtu\.be\//)[1].split(/[?&]/)[0];
}

<a href="#">
        <img src="p.png"></img>
    </a>

To use one controller from another, do this:

def action_that_calls_one_from_another_controller
  controller_you_want = ControllerYouWant.new
  controller_you_want.request = request
  controller_you_want.response = response
  controller_you_want.action_you_want
end

Note that neither DBCC DROPCLEANBUFFERS; nor DBCC FREEPROCCACHE; is supported in SQL Azure / SQL Data Warehouse.

However, if you need to reset the plan cache in SQL Azure, you can alter one of the tables in the query (for instance, just add then remove a column), this will have the side-effect of removing the plan from the cache.

I personally do this as a way of testing query performance without having to deal with cached plans.

More details about SQL Azure Procedure Cache here

Case Insensitive Substring Example

This is an extension of Eugene's answer, which converts the strings to lower case before checking for the substring:

if (index(lc($str), lc($substr)) != -1) {
    print "$str contains $substr\n";
} 

As Pax rightly said, measure, don't guess. That what I did for DNSwitness and the results were suprising: the ideal number of threads was much higher than I thought, something like 15,000 threads to get the fastest results.

Of course, it depends on many things, that's why you must measure yourself.

Complete measures (in French only) in Combien de fils d'exécution ?.

Well, this is probably frowned upon but you can make a 1px transparent image, then size it as needed in between text.

Some text <img src="spacer.png" height="1px" width="10px"> Some more text

I've run into this issue when one or two spaces just wasn't enough for my design sensibilities.

I solved a lot of issues by using the following code. Issues were : -

1. Not connecting with database
2. Database connection Rejection issues
3. Getting rid of logs in console (specific for this).

const sequelize = new Sequelize("test", "root", "root", {
  host: "127.0.0.1",
  dialect: "mysql",
  port: "8889",
  connectionLimit: 10,
  socketPath: "/Applications/MAMP/tmp/mysql/mysql.sock",
  // It will disable logging
  logging: false
});

The ScriptIgnoreAttribute class is in the System.Web.Extensions.dll assembly (Located under Assemblies > Framework in the VS Reference Manager). You have to add a reference to that assembly in your class library project.

You can find this information at top of the MSDN page for the ScriptIgnoreAttribute class.

Step 1

By annotating the controller with @CrossOrigin annotation will allow the CORS configurations.

@CrossOrigin
@RestController
public class SampleController { 
  .....
}

Step 2

Spring already has a CorsFilter even though You can just register your own CorsFilter as a bean to provide your own configuration as follows.

@Bean
public CorsFilter corsFilter() {
    final UrlBasedCorsConfigurationSource source = new UrlBasedCorsConfigurationSource();
    final CorsConfiguration config = new CorsConfiguration();
    config.setAllowedOrigins(Collections.singletonList("http://localhost:3000")); // Provide list of origins if you want multiple origins
    config.setAllowedHeaders(Arrays.asList("Origin", "Content-Type", "Accept"));
    config.setAllowedMethods(Arrays.asList("GET", "POST", "PUT", "OPTIONS", "DELETE", "PATCH"));
    config.setAllowCredentials(true);
    source.registerCorsConfiguration("/**", config);
    return new CorsFilter(source);
}

This should work

import static org.mockito.ArgumentMatchers.any;
import static org.mockito.Mockito.verify;

verify(bar).DoStuff(any(Foo[].class));

If your compiler supports (at least part of) C++11 you could do something like:

for (auto& t : myMap)
    std::cout << t.first << " " 
              << t.second.first << " " 
              << t.second.second << "\n";

For C++03 I'd use std::copy with an insertion operator instead:

typedef std::pair<string, std::pair<string, string> > T;

std::ostream &operator<<(std::ostream &os, T const &t) { 
    return os << t.first << " " << t.second.first << " " << t.second.second;
}

// ...
std:copy(myMap.begin(), myMap.end(), std::ostream_iterator<T>(std::cout, "\n"));

You don't need regex to split a string on whitespace:

In [1]: text = '''WYATT    - Ranked # 855 with    0.006   %
   ...: XAVIER   - Ranked # 587 with    0.013   %
   ...: YONG     - Ranked # 921 with    0.006   %
   ...: YOUNG    - Ranked # 807 with    0.007   %'''

In [2]: print '\n'.join(line.split()[0] for line in text.split('\n'))
WYATT
XAVIER
YONG
YOUNG

Another option would be as the return value for the stored procedure (I don't suggest this though, as that's usually best for error values).

I've included it as both when it's inserting a single row in cases where the stored procedure was being consumed by both other SQL procedures and a front-end which couldn't work with OUTPUT parameters (IBATIS in .NET I believe):

CREATE PROCEDURE My_Insert
    @col1            VARCHAR(20),
    @new_identity    INT    OUTPUT
AS
BEGIN
    SET NOCOUNT ON

    INSERT INTO My_Table (col1)
    VALUES (@col1)

    SELECT @new_identity = SCOPE_IDENTITY()

    SELECT @new_identity AS id

    RETURN
END

The output parameter is easier to work with in T-SQL when calling from other stored procedures IMO, but some programming languages have poor or no support for output parameters and work better with result sets.

CultureInfo us = new CultureInfo("en-US");
TotalAmount.ToString("N", us)

No need to debate, just use the source. Here, SE 6 for Linux, make your own conclusions:

jlong os::javaTimeMillis() {
  timeval time;
  int status = gettimeofday(&time, NULL);
  assert(status != -1, "linux error");
  return jlong(time.tv_sec) * 1000  +  jlong(time.tv_usec / 1000);
}


jlong os::javaTimeNanos() {
  if (Linux::supports_monotonic_clock()) {
    struct timespec tp;
    int status = Linux::clock_gettime(CLOCK_MONOTONIC, &tp);
    assert(status == 0, "gettime error");
    jlong result = jlong(tp.tv_sec) * (1000 * 1000 * 1000) + jlong(tp.tv_nsec);
    return result;
  } else {
    timeval time;
    int status = gettimeofday(&time, NULL);
    assert(status != -1, "linux error");
    jlong usecs = jlong(time.tv_sec) * (1000 * 1000) + jlong(time.tv_usec);
    return 1000 * usecs;
  }
}

I just use eco to do the job for me. eco is supported by Sprockets by default. It's a shorthand for Embedded Coffeescript which takes a eco file and compile into a Javascript template file, and the file will be treated like any other js files you have in your assets folder.

All you need to do is to create a template with extension .jst.eco and write some html code in there, and rails will automatically compile and serve the file with the assets pipeline, and the way to access the template is really easy: JST['path/to/file']({var: value}); where path/to/file is based on the logical path, so if you have file in /assets/javascript/path/file.jst.eco, you can access the template at JST['path/file']()

To make it work with angularjs, you can pass it into the template attribute instead of templateDir, and it will start working magically!

Write a:hover::before instead of a::before:hover: example.

You have no combinator (space, >, +...) so no children will get involved, ever.

However, you could avoid the need for jQuery by using an ID and getElementById, or you could use the old getElementsByName("frmSave")[0] or the even older document.forms['frmSave']. jQuery is unnecessary here.

Many popular Java webapps, including Jenkins and Nexus, use this mechanism:

1. Optionally, check a servlet context-param / init-param. This allows configuring multiple webapp instances per servlet container, using context.xml which can be done by modifying the WAR or by changing server settings (in case of Tomcat).

2. Check an environment variable (using System.getenv), if it is set, then use that folder as your application data folder. e.g. Jenkins uses JENKINS_HOME and Nexus uses PLEXUS_NEXUS_WORK. This allows flexible configuration without any changes to WAR.

3. Otherwise, use a subfolder inside user's home folder, e.g. $HOME/.yourapp. In Java code this will be:

   final File appFolder = new File(System.getProperty("user.home"), ".yourapp");
   

window.parent.document.getElementById("framekit").contentWindow.CallYourFunction('pass your value')

CallYourFunction() is function inside page and that function action on it

You will need to add an "integers.xml" file to your project's "res/values" folder. The contents of the file should be..

<resources>
    <integer name="google_play_services_version">4030500</integer>
</resources>

I find this to be the most efficient for finding if a value exists, logic can easily be inverted to find if a value doesn't exist (ie IS NULL);

SELECT * FROM primary_table st1
LEFT JOIN comparision_table st2 ON (st1.relevant_field = st2.relevant_field)
WHERE st2.primaryKey IS NOT NULL

*Replace relevant_field with the name of the value that you want to check exists in your table

*Replace primaryKey with the name of the primary key column on the comparison table.

This is how I do it to return to the right fragment otherwise if you have several fragments on the same level it would return to the first one if you don´t override the toolbar back button behavior.

toolbar.setNavigationOnClickListener(new View.OnClickListener() {
        @Override
        public void onClick(View view) {
            finish();
        }
    });

INT(10) does not mean a 10-digit number, it means an integer with a display width of 10 digits. The maximum value for an INT in MySQL is 2147483647 (or 4294967295 if unsigned).

You can use a BIGINT instead of INT to store it as a numeric. Using BIGINT will save you 3 bytes per row over VARCHAR(10).

To Store "Country + area + number separately". You can try using a VARCHAR(20), this allows you the ability to store international phone numbers properly, should that need arise.

I created dummy sample for Google Maps v2 Android with Kotlin and AndroidX

You can find complete project here: github-link

MainActivity.kt

class MainActivity : AppCompatActivity() {

val position = LatLng(-33.920455, 18.466941)

override fun onCreate(savedInstanceState: Bundle?) {
    super.onCreate(savedInstanceState)
    setContentView(R.layout.activity_main)

    with(mapView) {
        // Initialise the MapView
        onCreate(null)
        // Set the map ready callback to receive the GoogleMap object
        getMapAsync{
            MapsInitializer.initialize(applicationContext)
            setMapLocation(it)
        }
    }
}

private fun setMapLocation(map : GoogleMap) {
    with(map) {
        moveCamera(CameraUpdateFactory.newLatLngZoom(position, 13f))
        addMarker(MarkerOptions().position(position))
        mapType = GoogleMap.MAP_TYPE_NORMAL
        setOnMapClickListener {
            Toast.makeText(this@MainActivity, "Clicked on map", Toast.LENGTH_SHORT).show()
        }
    }
}

override fun onResume() {
    super.onResume()
    mapView.onResume()
}

override fun onPause() {
    super.onPause()
    mapView.onPause()
}

override fun onDestroy() {
    super.onDestroy()
    mapView.onDestroy()
}

override fun onLowMemory() {
    super.onLowMemory()
    mapView.onLowMemory()
 }
}

AndroidManifest.xml

<?xml version="1.0" encoding="utf-8"?>
<manifest xmlns:android="http://schemas.android.com/apk/res/android"
      xmlns:tools="http://schemas.android.com/tools" package="com.murgupluoglu.googlemap">

<uses-permission android:name="android.permission.INTERNET"/>
<uses-permission android:name="android.permission.ACCESS_FINE_LOCATION" />

<application
        android:allowBackup="true"
        android:icon="@mipmap/ic_launcher"
        android:label="@string/app_name"
        android:roundIcon="@mipmap/ic_launcher_round"
        android:supportsRtl="true"
        android:theme="@style/AppTheme"
        tools:ignore="GoogleAppIndexingWarning">
    <meta-data
            android:name="com.google.android.geo.API_KEY"
            android:value="API_KEY_HERE" />
    <activity android:name=".MainActivity">
        <intent-filter>
            <action android:name="android.intent.action.MAIN"/>

            <category android:name="android.intent.category.LAUNCHER"/>
        </intent-filter>
    </activity>
</application>

</manifest>

activity_main.xml

<?xml version="1.0" encoding="utf-8"?>
<androidx.constraintlayout.widget.ConstraintLayout
    xmlns:android="http://schemas.android.com/apk/res/android"
    xmlns:tools="http://schemas.android.com/tools"
    xmlns:app="http://schemas.android.com/apk/res-auto"
    android:layout_width="match_parent"
    android:layout_height="match_parent"
    tools:context=".MainActivity">

<com.google.android.gms.maps.MapView
        android:layout_width="0dp"
        android:layout_height="0dp"
        android:id="@+id/mapView"
        app:layout_constraintTop_toTopOf="parent"
        app:layout_constraintBottom_toBottomOf="parent"
        app:layout_constraintEnd_toEndOf="parent"
        app:layout_constraintStart_toStartOf="parent"/>

</androidx.constraintlayout.widget.ConstraintLayout>

Remove the coma at the end of your SELECT statement (VALUE,), and also remove the one at the end of your FROM statement (rrf b,)

You can try this:

static class Student {
    private int age;
    private int number;

    public Student(int age, int number) {
        this.age = age;
        this.number = number;
    }

    public Student() {
    }
}
public static void main(String[] args) throws IllegalAccessException, NoSuchFieldException {
    Student student1=new Student();
   // Class g=student1.getClass();
    Field[]fields=student1.getClass().getDeclaredFields();
    Field age=student1.getClass().getDeclaredField("age");
    age.setAccessible(true);
    age.setInt(student1,13);
    Field number=student1.getClass().getDeclaredField("number");
    number.setAccessible(true);
    number.setInt(student1,936);

    for (Field f:fields
         ) {
        f.setAccessible(true);

        System.out.println(f.getName()+" "+f.getInt(student1));

    }
}

}

in java 8:

name = Optional.ofNullable(city.getName()).orElse("N/A")

Setting val('') will empty the input field. So you would use this:

Clear the input field when the page loads:

$(function(){
    $('#shares').val('');
});

Delimiters, delimiters...

You really need them when there are multiple statements in your procedure. (in other words, do you have a ; in your code and then more statements/commands? Then, you need to use delimiters).

For such a simpler rpocedure as yours though, you could just do:

CREATE PROCEDURE ProG()
  SELECT * FROM `hs_hr_employee_leave_quota`;

I'm not sure what you are trying to do by wishing to convert C# to java, but if it is .net interoperability that you need, you might want to check out Mono

I would suggest using tables (pip3 install tables). You can save your .csv file to .h5 using pandas (pip3 install pandas),

import pandas as pd
data = pd.read_csv("dataset.csv")
store = pd.HDFStore('dataset.h5')
store['mydata'] = data
store.close()

You can then easily, and with less time even for huge amount of data, load your data in a NumPy array.

import pandas as pd
store = pd.HDFStore('dataset.h5')
data = store['mydata']
store.close()

# Data in NumPy format
data = data.values

For ES6/ES2015 you can import directly like:

// example.json
{
    "name": "testing"
}


// ES6/ES2015
// app.js
import * as data from './example.json';
const {name} = data;
console.log(name); // output 'testing'

If you use Typescript, you may declare json module like:

// tying.d.ts
declare module "*.json" {
    const value: any;
    export default value;
}

Since Typescript 2.9+ you can add --resolveJsonModule compilerOptions in tsconfig.json

{
  "compilerOptions": {
    "target": "es5",
     ...
    "resolveJsonModule": true,
     ...
  },
  ...
}

For me, restarting my computer appears to be enough to clear this issue.

It's often required after I've switched between branches, or merged branches using git.

Working JSFiddle below. When using position absolute, margin: 0 auto will not work, but you can do like this (will also scale):

left: 50%;
transform: translateX(-50%);

Update: Working JSFiddle

It looks like you are trying to start the Python interpreter by running the command python.

However the interpreter is already started. It is interpreting python as a name of a variable, and that name is not defined.

Try this instead and you should hopefully see that your Python installation is working as expected:

print("Hello world!")

Having tested this using Python 3.5 and pip 7.1.2 on Linux, the situation appears to be this:

• pip install --user somepackage installs to $HOME/.local, and uninstalling it does work using pip uninstall somepackage.

• This is true whether or not somepackage is also installed system-wide at the same time.

• If the package is installed at both places, only the local one will be uninstalled. To uninstall the package system-wide using pip, first uninstall it locally, then run the same uninstall command again, with root privileges.

• In addition to the predefined user install directory, pip install --target somedir somepackage will install the package into somedir. There is no way to uninstall a package from such a place using pip. (But there is a somewhat old unmerged pull request on Github that implements pip uninstall --target.)

• Since the only places pip will ever uninstall from are system-wide and predefined user-local, you need to run pip uninstall as the respective user to uninstall from a given user's local install directory.

You could try either of these. They are not giving me errors.

It is also the suggested method from typescript for array declaration.

By using the Array<Thing> it is making use of the generics in typescript. It is similar to asking for a List<T> in c# code.

// Declare with default value
private _possessions: Array<Thing> = new Array<Thing>();
// or
private _possessions: Array<Thing> = [];
// or -> prefered by ts-lint
private _possessions: Thing[] = [];

or

// declare
private _possessions: Array<Thing>;
// or -> preferd by ts-lint
private _possessions: Thing[];

constructor(){
    //assign
    this._possessions = new Array<Thing>();
    //or
    this._possessions = [];
}

If you have installed CUDA SDK, you can run "deviceQuery" to see the version of CUDA

Update your constraint layout dependency to the relevant version from '1.0.0-alpha2'. In my case, I changed to the following. compile 'com.android.support.constraint:constraint-layout:2.0.0-alpha5'

$image="img_name.jpg";
$pdf =new FPDF();
$pdf-> AddPage();
$pdf-> SetFont("Arial","B",10);
$pdf-> Image('profileimage/'.$image,100,15,35,35);

Use port number 22 (for sftp) instead of 21 (normal ftp). Solved this problem for me.

when using count(*) the result is {'count(*)': 9}

-- where 9 represents the number of rows in the table, for the instance.

So, in order to fetch the just the number, this worked in my case, using mysql 8.

cursor.fetchone()['count(*)']

Answers that suggest that the header provided in the question are supported out of the box by WCF are incorrect. The header in the question contains a Nonce and a Created timestamp in the UsernameToken, which is an official part of the WS-Security specification that WCF does not support. WCF only supports username and password out of the box.

If all you need to do is add a username and password, then Sergey's answer is the least-effort approach. If you need to add any other fields, you will need to supply custom classes to support them.

A somewhat more elegant approach that I found was to override the ClientCredentials, ClientCredentialsSecurityTokenManager and WSSecurityTokenizer classes to support the additional properties. I've provided a link to the blog post where the approach is discussed in detail, but here is the sample code for the overrides:

public class CustomCredentials : ClientCredentials
{
    public CustomCredentials()
    { }

    protected CustomCredentials(CustomCredentials cc)
        : base(cc)
    { }

    public override System.IdentityModel.Selectors.SecurityTokenManager CreateSecurityTokenManager()
    {
        return new CustomSecurityTokenManager(this);
    }

    protected override ClientCredentials CloneCore()
    {
        return new CustomCredentials(this);
    }
}

public class CustomSecurityTokenManager : ClientCredentialsSecurityTokenManager
{
    public CustomSecurityTokenManager(CustomCredentials cred)
        : base(cred)
    { }

    public override System.IdentityModel.Selectors.SecurityTokenSerializer CreateSecurityTokenSerializer(System.IdentityModel.Selectors.SecurityTokenVersion version)
    {
        return new CustomTokenSerializer(System.ServiceModel.Security.SecurityVersion.WSSecurity11);
    }
}

public class CustomTokenSerializer : WSSecurityTokenSerializer
{
    public CustomTokenSerializer(SecurityVersion sv)
        : base(sv)
    { }

    protected override void WriteTokenCore(System.Xml.XmlWriter writer,
                                            System.IdentityModel.Tokens.SecurityToken token)
    {
        UserNameSecurityToken userToken = token as UserNameSecurityToken;

        string tokennamespace = "o";

        DateTime created = DateTime.Now;
        string createdStr = created.ToString("yyyy-MM-ddTHH:mm:ss.fffZ");

        // unique Nonce value - encode with SHA-1 for 'randomness'
        // in theory the nonce could just be the GUID by itself
        string phrase = Guid.NewGuid().ToString();
        var nonce = GetSHA1String(phrase);

        // in this case password is plain text
        // for digest mode password needs to be encoded as:
        // PasswordAsDigest = Base64(SHA-1(Nonce + Created + Password))
        // and profile needs to change to
        //string password = GetSHA1String(nonce + createdStr + userToken.Password);

        string password = userToken.Password;

        writer.WriteRaw(string.Format(
        "<{0}:UsernameToken u:Id=\"" + token.Id +
        "\" xmlns:u=\"http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd\">" +
        "<{0}:Username>" + userToken.UserName + "</{0}:Username>" +
        "<{0}:Password Type=\"http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText\">" +
        password + "</{0}:Password>" +
        "<{0}:Nonce EncodingType=\"http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary\">" +
        nonce + "</{0}:Nonce>" +
        "<u:Created>" + createdStr + "</u:Created></{0}:UsernameToken>", tokennamespace));
    }

    protected string GetSHA1String(string phrase)
    {
        SHA1CryptoServiceProvider sha1Hasher = new SHA1CryptoServiceProvider();
        byte[] hashedDataBytes = sha1Hasher.ComputeHash(Encoding.UTF8.GetBytes(phrase));
        return Convert.ToBase64String(hashedDataBytes);
    }

}

Before creating the client, you create the custom binding and manually add the security, encoding and transport elements to it. Then, replace the default ClientCredentials with your custom implementation and set the username and password as you would normally:

var security = TransportSecurityBindingElement.CreateUserNameOverTransportBindingElement();
    security.IncludeTimestamp = false;
    security.DefaultAlgorithmSuite = SecurityAlgorithmSuite.Basic256;
    security.MessageSecurityVersion = MessageSecurityVersion.WSSecurity10WSTrustFebruary2005WSSecureConversationFebruary2005WSSecurityPolicy11BasicSecurityProfile10;

var encoding = new TextMessageEncodingBindingElement();
encoding.MessageVersion = MessageVersion.Soap11;

var transport = new HttpsTransportBindingElement();
transport.MaxReceivedMessageSize = 20000000; // 20 megs

binding.Elements.Add(security);
binding.Elements.Add(encoding);
binding.Elements.Add(transport);

RealTimeOnlineClient client = new RealTimeOnlineClient(binding,
    new EndpointAddress(url));

    client.ChannelFactory.Endpoint.EndpointBehaviors.Remove(client.ClientCredentials);
client.ChannelFactory.Endpoint.EndpointBehaviors.Add(new CustomCredentials());

client.ClientCredentials.UserName.UserName = username;
client.ClientCredentials.UserName.Password = password;

os.walk is your friend in this situation.

Straight from the documentation:

walk() generates the file names in a directory tree, by walking the tree either top down or bottom up. For each directory in the tree rooted at directory top (including top itself), it yields a 3-tuple (dirpath, dirnames, filenames).

I found that I needed to have a default value, even if it was an empty string for it to work. So this:

this.registerForm('someName', {
  firstName: new FormControl({disabled: true}),
});

...had to become this:

this.registerForm('someName', {
  firstName: new FormControl({value: '', disabled: true}),
});

See my question (which I don't believe is a duplicate): Passing 'disabled' in form state object to FormControl constructor doesn't work

Above wait statement is a nice example of Explicit wait.

As Explicit waits are intelligent waits that are confined to a particular web element(as mentioned in above x-path).

By Using explicit waits you are basically telling WebDriver at the max it is to wait for X units(whatever you have given as timeoutInSeconds) of time before it gives up.

It is also possible to use FormData(). But you need to set contentType as false:

var data = new FormData();
data.append('name', 'Bob'); 

function sendData() {
    $.ajax({
        url: '/helloworld',
        type: 'POST',
        contentType: false,
        data: data,
        dataType: 'json'
    });
}

When using LINQ extension methods (e.g. Select, Where), the lambda function might be converted to SQL that might not behave identically to your C# code. For instance, C#'s short-circuit evaluated && and || are converted to SQL's eager AND and OR. This can cause problems when you're checking for null in your lambda.

Example:

MyEnum? type = null;
Entities.Table.Where(a => type == null || 
    a.type == (int)type).ToArray();  // Exception: Nullable object must have a value

Try sprintf() for javascript.

Or

// First, checks if it isn't implemented yet.
if (!String.prototype.format) {
  String.prototype.format = function() {
    var args = arguments;
    return this.replace(/{(\d+)}/g, function(match, number) { 
      return typeof args[number] != 'undefined'
        ? args[number]
        : match
      ;
    });
  };
}

"{0} is dead, but {1} is alive! {0} {2}".format("ASP", "ASP.NET")

Both answers pulled from JavaScript equivalent to printf/string.format

You don't need to run Xcode 10.2 for iOS 12.2 support. You just need access to the appropriate folder in DeviceSupport.

A possible solution is

• Download Xcode 10.2 from a direkt link (not from App Store).
• Rename it for example to Xcode102.
• Put it into /Applications. It's possible to have multiple Xcode versions in the same directory.

• Create a symbolic link in Terminal.app to have access to the 12.2 device support folder in Xcode 10.2

  ln -s /Applications/Xcode102.app/Contents/Developer/Platforms/iPhoneOS.platform/DeviceSupport/12.2\ \(16E226\) /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform/DeviceSupport
  

You can move Xcode 10.2 to somewhere else but then you have to adjust the path.

Now Xcode 10.1 supports devices running iOS 12.2

Sorry, JS code...

Tested with the two inputs:

a = [55,11,66,77,72];
a = [ 0, 12, 13, 4, 5, 32, 8 ];

var first = Number.MIN_VALUE;
var second = Number.MIN_VALUE;
for (var i = -1, len = a.length; ++i < len;) {
    var dist = a[i];
    // get the largest 2
    if (dist > first) {
        second = first;
        first = dist;
    } else if (dist > second) { // && dist < first) { // this is actually not needed, I believe
        second = dist;
    }
}

console.log('largest, second largest',first,second);
largest, second largest 32 13

This should have a maximum of a.length*2 comparisons and only goes through the list once.

I have used Arrays.toString(array_name).replace("[","").replace("]","").replace(", ",""); as I have seen it from some of the comments above, but also i added an additional space character after the comma (the part .replace(", ","")), because while I was printing out each value in a new line, there was still the space character shifting the words. It solved my problem.

Give each input a name attribute. Only the clicked input's name attribute will be sent to the server.

<input type="submit" name="publish" value="Publish">
<input type="submit" name="save" value="Save">

And then

<?php
    if (isset($_POST['publish'])) {
        # Publish-button was clicked
    }
    elseif (isset($_POST['save'])) {
        # Save-button was clicked
    }
?>

Edit: Changed value attributes to alt. Not sure this is the best approach for image buttons though, any particular reason you don't want to use input[type=image]?

Edit: Since this keeps getting upvotes I went ahead and changed the weird alt/value code to real submit inputs. I believe the original question asked for some sort of image buttons but there are so much better ways to achieve that nowadays instead of using input[type=image].

After wrestling a lot, found an uncomplicated solution for Mac. Hope this will help.

1. Leave it to upgrade.

2. Then go to application, right click on chrome app and open package contents.

3. Navigate further as /Applications/Google Chrome old.app/Contents/Frameworks/Google Chrome Framework.framework/Versions

4. You will find a current folder. Delete this :)

5. Restart chrome and enjoy..

I think the DocumentCompleted event will get fired for all child documents that are loaded as well (like JS and CSS, for example). You could look at the WebBrowserDocumentCompletedEventArgs in DocumentCompleted and check the Url property and compare that to the Url of the main page.

Yes, you can use a while True: loop that never breaks to run Python code continually.

However, you will need to put the code you want to run continually inside the loop:

#!/usr/bin/python

while True:
    # some python code that I want 
    # to keep on running

Also, time.sleep is used to suspend the operation of a script for a period of time. So, since you want yours to run continually, I don't see why you would use it.

If you use bootstrap just add form-control class. For example:

class="form-control" 

I got this error when upgrading

gulp-typescript 3.0.2 ? 3.1.0

Putting it back to 3.0.2 fixed it

As of pandas 0.17.0, DataFrame.sort() is deprecated, and set to be removed in a future version of pandas. The way to sort a dataframe by its values is now is DataFrame.sort_values

As such, the answer to your question would now be

df.sort_values(['b', 'c'], ascending=[True, False], inplace=True)

This may help some one with same requirement

private String getDate(long time){
        SimpleDateFormat formatter = new SimpleDateFormat("dd/MM/yyyy hh:mm a");
        String dateString = formatter.format(new Date(time));
        String date = ""+dateString;
        return date;
    }

Maybe I missunderstand the singleton pattern but my solution is this simple and pragmatic (pythonic?). This code fullfills two goals

1. Make the instance of Foo accessiable everywhere (global).
2. Only one instance of Foo can exist.

This is the code.

#!/usr/bin/env python3

class Foo:
    me = None

    def __init__(self):
        if Foo.me != None:
            raise Exception('Instance of Foo still exists!')

        Foo.me = self


if __name__ == '__main__':
    Foo()
    Foo()

Output

Traceback (most recent call last):
  File "./x.py", line 15, in <module>
    Foo()
  File "./x.py", line 8, in __init__
    raise Exception('Instance of Foo still exists!')
Exception: Instance of Foo still exists!

I have the same answer in Kotlin:

/**
 * Returns the filter of the editText'es CharSequence value when [filterType] is:
 * 1 -> letters; 2 -> letters and digits; 3 -> digits;
 * 4 -> digits and dots
 */
class InputFilterAlphanumeric(private val filterType: Int): InputFilter {
    override fun filter(source: CharSequence?, start: Int, end: Int, dest: Spanned?, dstart: Int, dend: Int): CharSequence {
        (source as? SpannableStringBuilder)?.let {sourceAsSpannableBuilder  ->
            for (i in (end - 1) downTo start) {
                val currentChar = source[i]
                when(filterType) {
                    1 -> {
                        if (!currentChar.isLetter() && !currentChar.isWhitespace()) {
                            sourceAsSpannableBuilder.delete(i, i + 1)
                        }
                    }
                    2 -> {
                        if (!currentChar.isLetterOrDigit() && !currentChar.isWhitespace()) {
                            sourceAsSpannableBuilder.delete(i, i + 1)
                        }
                    }
                    3 -> {
                        if (!currentChar.isDigit()) {
                            sourceAsSpannableBuilder.delete(i, i + 1)
                        }
                    }
                    4 -> {
                        if (!currentChar.isDigit() || !currentChar.toString().contains(".")) {
                            sourceAsSpannableBuilder.delete(i, i + 1)
                        }
                    }
                }
            }
            return source
        } ?: run {
            val filteredStringBuilder = StringBuilder()
            for (i in start until end) {
                val currentChar = source?.get(i)
                when(filterType) {
                    1 -> {
                        if (currentChar?.isLetter()!! || currentChar.isWhitespace()) {
                            filteredStringBuilder.append(currentChar)
                        }
                    }
                    2 -> {
                        if (currentChar?.isLetterOrDigit()!! || currentChar.isWhitespace()) {
                            filteredStringBuilder.append(currentChar)
                        }
                    }
                    3 -> {
                        if (currentChar?.isDigit()!!) {
                            filteredStringBuilder.append(currentChar)
                        }
                    }
                    4 -> {
                        if (currentChar?.isDigit()!! || currentChar.toString().contains(".")) {
                            filteredStringBuilder.append(currentChar)
                        }
                    }
                }
            }
            return filteredStringBuilder
        }
    }
}

and get the class with an Extension function:

fun EditText.filterByDataType(filterType: Int) {
    this.filters = arrayOf<InputFilter>(InputFilterAlphanumeric(filterType))
}

Previous answer is not correct in my experience, you can't pass it a simple string, needs to be a datetime object. So:

import datetime 
df.loc[datetime.date(year=2014,month=1,day=1):datetime.date(year=2014,month=2,day=1)]

You can use the output value from stat_summary()

ggplot(data=PlantGrowth, aes(x=group, y=weight, fill=group)) 
+ geom_boxplot() 
+ stat_summary(fun.y=mean, colour="darkred", geom="point", hape=18, size=3,show_guide = FALSE)
+ stat_summary(fun.y=mean, colour="red", geom="text", show_guide = FALSE, 
               vjust=-0.7, aes( label=round(..y.., digits=1)))

Range("A1").value = Environ("Username")

This is better than Application.Username, which doesn't always supply the Windows username. Thanks to Kyle for pointing this out.

• Application Username is the name of the User set in Excel > Tools > Options
• Environ("Username") is the name you registered for Windows; see Control Panel >System

In my case,
My application is developed in MVC and my home controller class was decorated with [Authorize] which was causing this issue.
So I've removed it because my application don't require any authentication.

It escapes a string that cannot be passed to XML as usual:

Example:

The string contains "&" in it.

You can not:

<FL val="Company Name">Dolce & Gabbana</FL>

Therefore, you must use CDATA:

<FL val="Company Name"> <![CDATA["Dolce & Gabbana"]]> </FL>

another alternative is to use a form replacement script/library. They usually hide the original element and replace them with a div or span, which you can style in whatever way you like.

Examples are:

http://customformelements.net (based on mootools) http://www.htmldrive.net/items/show/481/jQuery-UI-Radiobutton-und-Checkbox-Replacement.html

The below is a working example. Add async:false.

const response = $.ajax({
                    type:"POST",
                    dataType:"json",
                    async:false, 
                    url:"your-url",
                    data:{"data":"data"}                        
                });                   
 console.log("response: ", response);

You have to replace string line

QString line = in.readLine();

into while:

QFile file("/home/hamad/lesson11.txt");
if(!file.open(QIODevice::ReadOnly)) {
    QMessageBox::information(0, "error", file.errorString());
}

QTextStream in(&file);

while(!in.atEnd()) {
    QString line = in.readLine();    
    QStringList fields = line.split(",");    
    model->appendRow(fields);    
}

file.close();

The answers given so far are not ideal because they require a lot of needless work resolving merge conflicts, or they make too many assumptions which are frequently false. This is how to do it perfectly. The link is to my own site.

How to Commit to a Different Branch in git

You have uncommited changes on my_branch that you want to commit to master, without committing all the changes from my_branch.

Example

git merge master
git stash -u
git checkout master
git stash apply
git reset
git add example.js
git commit
git checkout .
git clean -f -d
git checkout my_branch
git merge master
git stash pop

Explanation

Start by merging master into your branch, since you'll have to do that eventually anyway, and now is the best time to resolve any conflicts.

The -u option (aka --include-untracked) in git stash -u prevents you from losing untracked files when you later do git clean -f -d within master.

After git checkout master it is important that you do NOT git stash pop, because you will need this stash later. If you pop the stash created in my_branch and then do git stash in master, you will cause needless merge conflicts when you later apply that stash in my_branch.

git reset unstages everything resulting from git stash apply. For example, files that have been modified in the stash but do not exist in master get staged as "deleted by us" conflicts.

git checkout . and git clean -f -d discard everything that isn't committed: all changes to tracked files, and all untracked files and directories. They are already saved in the stash and if left in master would cause needless merge conflicts when switching back to my_branch.

The last git stash pop will be based on the original my_branch, and so will not cause any merge conflicts. However, if your stash contains untracked files which you have committed to master, git will complain that it "Could not restore untracked files from stash". To resolve this conflict, delete those files from your working tree, then git stash pop, git add ., and git reset.

I tested below code with SQL Server 2008 R2 Express and I believe we should have solution for all 6 steps you outlined. Let's take on them one-by-one:

1 - Enable TCP/IP

We can enable TCP/IP protocol with WMI:

set wmiComputer = GetObject( _
    "winmgmts:" _
    & "\\.\root\Microsoft\SqlServer\ComputerManagement10")
set tcpProtocols = wmiComputer.ExecQuery( _
    "select * from ServerNetworkProtocol " _
    & "where InstanceName = 'SQLEXPRESS' and ProtocolName = 'Tcp'")

if tcpProtocols.Count = 1 then
    ' set tcpProtocol = tcpProtocols(0)
    ' I wish this worked, but unfortunately 
    ' there's no int-indexed Item property in this type

    ' Doing this instead
    for each tcpProtocol in tcpProtocols
        dim setEnableResult
            setEnableResult = tcpProtocol.SetEnable()
            if setEnableResult <> 0 then 
                Wscript.Echo "Failed!"
            end if
    next
end if

2 - Open the right ports in the firewall

I believe your solution will work, just make sure you specify the right port. I suggest we pick a different port than 1433 and make it a static port SQL Server Express will be listening on. I will be using 3456 in this post, but please pick a different number in the real implementation (I feel that we will see a lot of applications using 3456 soon :-)

3 - Modify TCP/IP properties enable a IP address

We can use WMI again. Since we are using static port 3456, we just need to update two properties in IPAll section: disable dynamic ports and set the listening port to 3456:

set wmiComputer = GetObject( _
    "winmgmts:" _
    & "\\.\root\Microsoft\SqlServer\ComputerManagement10")
set tcpProperties = wmiComputer.ExecQuery( _
    "select * from ServerNetworkProtocolProperty " _
    & "where InstanceName='SQLEXPRESS' and " _
    & "ProtocolName='Tcp' and IPAddressName='IPAll'")

for each tcpProperty in tcpProperties
    dim setValueResult, requestedValue

    if tcpProperty.PropertyName = "TcpPort" then
        requestedValue = "3456"
    elseif tcpProperty.PropertyName ="TcpDynamicPorts" then
        requestedValue = ""
    end if

    setValueResult = tcpProperty.SetStringValue(requestedValue)
    if setValueResult = 0 then 
        Wscript.Echo "" & tcpProperty.PropertyName & " set."
    else
        Wscript.Echo "" & tcpProperty.PropertyName & " failed!"
    end if
next

Note that I didn't have to enable any of the individual addresses to make it work, but if it is required in your case, you should be able to extend this script easily to do so.

Just a reminder that when working with WMI, WBEMTest.exe is your best friend!

4 - Enable mixed mode authentication in sql server

I wish we could use WMI again, but unfortunately this setting is not exposed through WMI. There are two other options:

1. Use LoginMode property of Microsoft.SqlServer.Management.Smo.Server class, as described here.

2. Use LoginMode value in SQL Server registry, as described in this post. Note that by default the SQL Server Express instance is named SQLEXPRESS, so for my SQL Server 2008 R2 Express instance the right registry key was HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQLServer.

5 - Change user (sa) default password

You got this one covered.

6 - Finally (connect to the instance)

Since we are using a static port assigned to our SQL Server Express instance, there's no need to use instance name in the server address anymore.

SQLCMD -U sa -P newPassword -S 192.168.0.120,3456

Please let me know if this works for you (fingers crossed!).

Okay, my 2 cents, using the default value of Laravel's old() function.

<select name="type">
    @foreach($options as $key => $text)
        <option @if((int) old('type', $selectedOption) === $key) selected @endif value="{{ $key }}">{{ $text }}</option>
    @endforeach
</select>

I'm afraid your example does not work the way you think. This part:

this.do = function(){ /*do something*/ };

overwrites the definition of

MyClass.prototype.do = function(){ /*do something else*/ };

Since the newly created object already has a "do" property, it does not look up the prototypal chain.

The classical form of inheritance in Javascript is awkard, and hard to grasp. I would suggest using Douglas Crockfords simple inheritance pattern instead. Like this:

function my_class(name) {
    return {
        name: name,
        do: function () { /* do something */ }
    };
}

function my_child(name) {
    var me = my_class(name);
    var base_do = me.do;
    me.do = function () {
        if (this.name === 'something'){
            //do something new
        } else {
            base_do.call(me);
        }
    }
    return me;
}

var o = my_child("something");
o.do(); // does something new

var u = my_child("something else");
u.do(); // uses base function

In my opinion a much clearer way of handling objects, constructors and inheritance in javascript. You can read more in Crockfords Javascript: The good parts.

You can use filter too

this.products = array_products.filter((x) => x.Name.includes("ABC"))

Here you can find how to set path to JDK for Glassfish: http://www.devdaily.com/blog/post/java/fixing-glassfish-jdk-path-problem-solved

Check

glassfish\config\asenv.bat

where java path is configured

REM set AS_JAVA=C:\Program Files\Java\jdk1.6.0_04\jre/..
set AS_JAVA=C:\Program Files\Java\jdk1.5.0_16

Since it's not mentioned what database you mean I'm assuming SQL Server. Below solution works for both 2005 and 2008.

You have to create table with VARBINARY(MAX) as one of the columns. In my example I've created Table Raporty with column RaportPlik being VARBINARY(MAX) column.

Method to put file into database from drive:

public static void databaseFilePut(string varFilePath) {
    byte[] file;
    using (var stream = new FileStream(varFilePath, FileMode.Open, FileAccess.Read)) {
        using (var reader = new BinaryReader(stream)) {
            file = reader.ReadBytes((int) stream.Length);       
        }          
    }
    using (var varConnection = Locale.sqlConnectOneTime(Locale.sqlDataConnectionDetails))
    using (var sqlWrite = new SqlCommand("INSERT INTO Raporty (RaportPlik) Values(@File)", varConnection)) {
        sqlWrite.Parameters.Add("@File", SqlDbType.VarBinary, file.Length).Value = file;
        sqlWrite.ExecuteNonQuery();
    }
}

This method is to get file from database and save it on drive:

public static void databaseFileRead(string varID, string varPathToNewLocation) {
    using (var varConnection = Locale.sqlConnectOneTime(Locale.sqlDataConnectionDetails))
    using (var sqlQuery = new SqlCommand(@"SELECT [RaportPlik] FROM [dbo].[Raporty] WHERE [RaportID] = @varID", varConnection)) {
        sqlQuery.Parameters.AddWithValue("@varID", varID);
        using (var sqlQueryResult = sqlQuery.ExecuteReader())
            if (sqlQueryResult != null) {
                sqlQueryResult.Read();
                var blob = new Byte[(sqlQueryResult.GetBytes(0, 0, null, 0, int.MaxValue))];
                sqlQueryResult.GetBytes(0, 0, blob, 0, blob.Length);
                using (var fs = new FileStream(varPathToNewLocation, FileMode.Create, FileAccess.Write)) 
                    fs.Write(blob, 0, blob.Length);
            }
    }
}

This method is to get file from database and put it as MemoryStream:

public static MemoryStream databaseFileRead(string varID) {
    MemoryStream memoryStream = new MemoryStream();
    using (var varConnection = Locale.sqlConnectOneTime(Locale.sqlDataConnectionDetails))
    using (var sqlQuery = new SqlCommand(@"SELECT [RaportPlik] FROM [dbo].[Raporty] WHERE [RaportID] = @varID", varConnection)) {
        sqlQuery.Parameters.AddWithValue("@varID", varID);
        using (var sqlQueryResult = sqlQuery.ExecuteReader())
            if (sqlQueryResult != null) {
                sqlQueryResult.Read();
                var blob = new Byte[(sqlQueryResult.GetBytes(0, 0, null, 0, int.MaxValue))];
                sqlQueryResult.GetBytes(0, 0, blob, 0, blob.Length);
                //using (var fs = new MemoryStream(memoryStream, FileMode.Create, FileAccess.Write)) {
                memoryStream.Write(blob, 0, blob.Length);
                //}
            }
    }
    return memoryStream;
}

This method is to put MemoryStream into database:

public static int databaseFilePut(MemoryStream fileToPut) {
        int varID = 0;
        byte[] file = fileToPut.ToArray();
        const string preparedCommand = @"
                    INSERT INTO [dbo].[Raporty]
                               ([RaportPlik])
                         VALUES
                               (@File)
                        SELECT [RaportID] FROM [dbo].[Raporty]
            WHERE [RaportID] = SCOPE_IDENTITY()
                    ";
        using (var varConnection = Locale.sqlConnectOneTime(Locale.sqlDataConnectionDetails))
        using (var sqlWrite = new SqlCommand(preparedCommand, varConnection)) {
            sqlWrite.Parameters.Add("@File", SqlDbType.VarBinary, file.Length).Value = file;

            using (var sqlWriteQuery = sqlWrite.ExecuteReader())
                while (sqlWriteQuery != null && sqlWriteQuery.Read()) {
                    varID = sqlWriteQuery["RaportID"] is int ? (int) sqlWriteQuery["RaportID"] : 0;
                }
        }
        return varID;
    }

Happy coding :-)

This work on all browser to get pasted value. And also to creating common method for all text box.

$("#textareaid").bind("paste", function(e){       
    var pastedData = e.target.value;
    alert(pastedData);
} )

What about this?

>>> first_element, last_element = some_list[0], some_list[-1]

I used this

:top
cls
type G:\empty.txt
type I:\empty.txt
timeout /T 500
goto top

Joseph forgot to add the value in his example with withDefault. Here is the code I ended up using:

Map map = [:].withDefault { key -> return [] }
listOfObjects.each { map.get(it.myKey).add(it.myValue) }

Just did a quick google search and found that

System.getProperty("user.dir");

returns the current working directory as String. So to get a File out of this, just use

File projectDir = new File(System.getProperty("user.dir"));

An addition to the answer: when you do not want to list the folders, only the files in the subfolders, use /A-D switch like this:

dir ..\myfolder /b /s /A-D /o:gn>list.txt

If you're looking for an address (IPv4) of the specific interface say wlan0 then try this code which uses getifaddrs():

#include <arpa/inet.h>
#include <sys/socket.h>
#include <netdb.h>
#include <ifaddrs.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
int main(int argc, char *argv[])
{
    struct ifaddrs *ifaddr, *ifa;
    int family, s;
    char host[NI_MAXHOST];

    if (getifaddrs(&ifaddr) == -1) 
    {
        perror("getifaddrs");
        exit(EXIT_FAILURE);
    }


    for (ifa = ifaddr; ifa != NULL; ifa = ifa->ifa_next) 
    {
        if (ifa->ifa_addr == NULL)
            continue;  

        s=getnameinfo(ifa->ifa_addr,sizeof(struct sockaddr_in),host, NI_MAXHOST, NULL, 0, NI_NUMERICHOST);

        if((strcmp(ifa->ifa_name,"wlan0")==0)&&(ifa->ifa_addr->sa_family==AF_INET))
        {
            if (s != 0)
            {
                printf("getnameinfo() failed: %s\n", gai_strerror(s));
                exit(EXIT_FAILURE);
            }
            printf("\tInterface : <%s>\n",ifa->ifa_name );
            printf("\t  Address : <%s>\n", host); 
        }
    }

    freeifaddrs(ifaddr);
    exit(EXIT_SUCCESS);
}

You can replace wlan0 with eth0 for ethernet and lo for local loopback.

The structure and detailed explanations of the data structures used could be found here.

To know more about linked list in C this page will be a good starting point.

My solution is to use a custom attribute that provides default value property initialization by constant or using property type initializer.

[AttributeUsage(AttributeTargets.Property, AllowMultiple = false, Inherited = true)]
public class InstanceAttribute : Attribute
{
    public bool IsConstructorCall { get; private set; }
    public object[] Values { get; private set; }
    public InstanceAttribute() : this(true) { }
    public InstanceAttribute(object value) : this(false, value) { }
    public InstanceAttribute(bool isConstructorCall, params object[] values)
    {
        IsConstructorCall = isConstructorCall;
        Values = values ?? new object[0];
    }
}

To use this attribute it's necessary to inherit a class from special base class-initializer or use a static helper method:

public abstract class DefaultValueInitializer
{
    protected DefaultValueInitializer()
    {
        InitializeDefaultValues(this);
    }

    public static void InitializeDefaultValues(object obj)
    {
        var props = from prop in obj.GetType().GetProperties()
                    let attrs = prop.GetCustomAttributes(typeof(InstanceAttribute), false)
                    where attrs.Any()
                    select new { Property = prop, Attr = ((InstanceAttribute)attrs.First()) };
        foreach (var pair in props)
        {
            object value = !pair.Attr.IsConstructorCall && pair.Attr.Values.Length > 0
                            ? pair.Attr.Values[0]
                            : Activator.CreateInstance(pair.Property.PropertyType, pair.Attr.Values);
            pair.Property.SetValue(obj, value, null);
        }
    }
}

Usage example:

public class Simple : DefaultValueInitializer
{
    [Instance("StringValue")]
    public string StringValue { get; set; }
    [Instance]
    public List<string> Items { get; set; }
    [Instance(true, 3,4)]
    public Point Point { get; set; }
}

public static void Main(string[] args)
{
    var obj = new Simple
        {
            Items = {"Item1"}
        };
    Console.WriteLine(obj.Items[0]);
    Console.WriteLine(obj.Point);
    Console.WriteLine(obj.StringValue);
}

Output:

Item1
(X=3,Y=4)
StringValue

Based on previous answers (but fixed)

using static System.IO.Path;

var dir = GetFileName(path?.TrimEnd(DirectorySeparatorChar, AltDirectorySeparatorChar));

Explanation of GetFileName from .NET source:

Returns the name and extension parts of the given path. The resulting string contains the characters of path that follow the last backslash ("\"), slash ("/"), or colon (":") character in path. The resulting string is the entire path if path contains no backslash after removing trailing slashes, slash, or colon characters. The resulting string is null if path is null.

I should have read more on existing questions in stack overflow.

C++ Passing Variable Number of Arguments is a similar question. Mike F has the following explanation:

There's no way of calling (eg) printf without knowing how many arguments you're passing to it, unless you want to get into naughty and non-portable tricks.

The generally used solution is to always provide an alternate form of vararg functions, so printf has vprintf which takes a va_list in place of the .... The ... versions are just wrappers around the va_list versions.

This is exactly what I was looking for. I performed a test implementation like this:

void Error(const char* format, ...)
{
    char dest[1024 * 16];
    va_list argptr;
    va_start(argptr, format);
    vsprintf(dest, format, argptr);
    va_end(argptr);
    printf(dest);
}

Assuming that "a" and "b" are bean properties

rendered="#{bean.a==12 and (bean.b==13 or bean.b==15)}"

You may look at JSF EL operators

For those who need the same feature in IE 8, this is how I solved the problem:

  var myImage = $('<img/>');

               myImage.attr('width', 300);
               myImage.attr('height', 300);
               myImage.attr('class', "groupMediaPhoto");
               myImage.attr('src', photoUrl);

I could not force IE8 to use object in constructor.

Just use the function plot as follows

figure()
...
plot(t, a)
plot(t, b)
plot(t, c)

For Swift 3

Create a function for button action first and then add the function to your button target

func buttonAction(sender: UIButton!) {
    print("Button tapped")
}

button.addTarget(self, action: #selector(buttonAction),for: .touchUpInside)