I also tried to update a component from a jsf backing bean/class

You need to do the following after manipulating the UI component:

FacesContext.getCurrentInstance().getPartialViewContext().getRenderIds().add(componentToBeRerendered.getClientId())

It is important to use the clientId instead of the (server-side) componentId!!

If you dont want to change the format of date and time from the timestamp, you can use the explode function in php

$timestamp = "2012-04-02 02:57:54"
$datetime = explode(" ",$timestamp);
$date = $datetime[0];
$time = $datetime[1];

html code here

    <input id="result" style="width:300px"/>some example text
    <button onclick="copyToClipboard('result')">Copy P1</button>
    <input type="text" style="width:400px" placeholder="Paste here for test" />

JS CODE:

     function copyToClipboard(elementId) {

                      // Create a "hidden" input
                      var aux = document.createElement("input");

                      aux.setAttribute("value", document.getElementById(elementId).value);
                      // Append it to the body
                      document.body.appendChild(aux);
                      // Highlight its content
                      aux.select();
                      // Copy the highlighted text
                      document.execCommand("copy");
                      // Remove it from the body
                      document.body.removeChild(aux);
                    }

byte[] a = new byte[50];

char [] cArray= System.Text.Encoding.ASCII.GetString(a).ToCharArray();

From the URL thedixon posted

http://bytes.com/topic/c-sharp/answers/250261-byte-char

You cannot ToCharArray the byte without converting it to a string first.

To quote Jon Skeet there

There's no need for the copying here - just use Encoding.GetChars. However, there's no guarantee that ASCII is going to be the appropriate encoding to use.

This error started out of the blue for me, on a test that had always worked. I couldn't find any suggestions that helped until I noticed my Macbook was running sluggishly. I noticed the CPU was pegged by another process, which I killed. The Jasmine async error disappeared and my tests are fine once again.

Don't ask me why, I don't know. But in my circumstance it seemed to be a lack of system resources at fault.

If your (logical) check is for a negation (!) and you want to capture both JS null and undefined (as different Browsers will give you different results) you would use the less restrictive comparison: e.g.:

var ItemID = Item.get_id();
if (ItemID != null)
{
 //do stuff
}

This will capture both null and undefined

Use this method and pass your array in parameter

Collections.shuffle(arrayList);

This method return void so it will not give you a new list but as we know that array is passed as a reference type in Java so it will shuffle your array and save shuffled values in it. That's why you don't need any return type.

You can now use arraylist which is shuffled.

I am totally unable to connect to localdb with any tool including MSSMA, sqlcmd, etc. You would think Microsoft would document this, but I find nothing on MSDN. I have v12 and tried (localdb)\v12.0 and that didn't work. Issuing the command sqllocaldb i MSSQLLocalDB shows that the local instance is running, but there is no way to connect to it.

c:\> sqllocaldb i MSSQLLocalDB
Name:               MSSQLLocalDB
Version:            12.0.2000.8
Shared name:
Owner:              CWOLF-PC\cwolf
Auto-create:        Yes
State:              Running
Last start time:    6/12/2014 8:34:11 AM
Instance pipe name: np:\\.\pipe\LOCALDB#C86052DD\tsql\query
c:\>
c:\> sqlcmd -L

Servers:
    ;UID:Login ID=?;PWD:Password=?;Trusted_Connection:Use Integrated Security=?;
*APP:AppName=?;*WSID:WorkStation ID=?;

I finally figured it out!! the connect string is (localdb)\MSSQLLocalDB, e.g.:

$ sqlcmd -S \(localdb\)\\MSSQLLocalDB
1> select 'hello!'
2> go

------
hello!

(1 rows affected)    

This would be an other method (without using any loop!):

import numpy as np
list(np.float_(list_name))

Well, there is an array type in recent Postgres versions (not 100% about PG 7.4). You can even index them, using a GIN or GIST index. The syntaxes are:

create table foo (
  bar  int[] default '{}'
);

select * from foo where bar && array[1] -- equivalent to bar && '{1}'::int[]

create index on foo using gin (bar); -- allows to use an index in the above query

But as the prior answer suggests, it will be better to normalize properly.

@TheBigO, that's not correct. Spans can have background/images (tested in IE8 and Chrome as a sanity check).

The issue is that the a.btn-pToolName is marked as display: block. This causes webkit browsers to no longer show the background in the outer span. IE seems to render it how the OP is wanting.

OP chance the .btn-pTool class to be display: inline-block to make it work like a span/div hybrid (take the background, but not cause a break in the layout).

You can also use constants instead of strings to specify the mode you want. The benefit is if you make a typo in a constant name, your program will raise an runtime exception.

The constants are File::RDONLY or File::WRONLY or File::CREAT. You can also combine them if you like.

Full description of file open modes on ruby-doc.org

There is a javascript library for this, see FileSaver.js on Github

However the saveAs() function won't send pure string to the browser, you need to convert it to blob:

function data2blob(data, isBase64) {
  var chars = "";

  if (isBase64)
    chars = atob(data);
  else
    chars = data;

  var bytes = new Array(chars.length);
  for (var i = 0; i < chars.length; i++) {
    bytes[i] = chars.charCodeAt(i);
  }

  var blob = new Blob([new Uint8Array(bytes)]);
  return blob;
}

and then call saveAs on the blob, as like:

var myString = "my string with some stuff";
saveAs( data2blob(myString), "myString.txt" );

Of course remember to include the above-mentioned javascript library on your webpage using <script src=FileSaver.js>

Check this:

<select class="form-control" id="department" name="department" type="text">
    <option value="medical-furniture" @if($list->department == "medical-furniture") selected @endif>Medical furniture</option>
    <option value="medical-table" @if($list->department == "medical-table") selected @endif>Medical table</option>
    <option value="service" @if($list->department == "service") selected @endif>Service</option>
</select>

By chance, is this occurring on a directory using OverlayFS (or some other special file system type)?

I just had this issue where my cross-compiled version of bash would use an internal implementation of getcwd which has issues with OverlayFS. I found information about this here:

It seems that this can be traced to an internal implementation of getcwd() in bash. When cross-compiled, it can't check for getcwd() use of malloc, so it is cautious and sets GETCWD_BROKEN and uses an internal implementation of getcwd(). This internal implementation doesn't seem to work well with OverlayFS.

http://permalink.gmane.org/gmane.linux.embedded.yocto.general/25204

You can configure and rebuild bash with bash_cv_getcwd_malloc=yes (if you're actually building bash and your C library does malloc a getcwd call).

if (str.size () > 0)  str.resize (str.size () - 1);

An std::erase alternative is good, but I like the "- 1" (whether based on a size or end-iterator) - to me, it helps expresses the intent.

BTW - Is there really no std::string::pop_back ? - seems strange.

The documentation has been updated. My answer has substantial changes vs the accepted answer: I wanted to reflect documentation is up-to-date, and accepted answer has a few broken links.

Also, I didn't understand when the accepted answer said "it defaults to node server.js". I think the documentation clarifies the default behavior:

npm-start

Start a package

Synopsis

npm start [-- <args>]

Description

This runs an arbitrary command specified in the package's "start" property of its "scripts" object. If no "start" property is specified on the "scripts" object, it will run node server.js.

In summary, running npm start could do one of two things:

1. npm start {command_name}: Run an arbitrary command (i.e. if such command is specified in the start property of package.json's scripts object)
2. npm start: Else if no start property exists (or no command_name is passed): Run node server.js, (which may not be appropriate, for example the OP doesn't have server.js; the OP runs nodeapp.js )
3. I said I would list only 2 items, but are other possibilities (i.e. error cases). For example, if there is no package.json in the directory where you run npm start, you may see an error: npm ERR! enoent ENOENT: no such file or directory, open '.\package.json'

In CSS:

  textarea { 
    border-style: none; 
    border-color: Transparent; 
    overflow: auto;        
  }

Looks like you are hitting the limit on connections per server. I see you are loading a lot of static files and my advice is to separate them on subdomains and serve them directly with Nginx for example.

• Create a subdomain called img.yoursite.com and load all your images from there.

• Create a subdomain called scripts.yourdomain.com and load all your JS and CSS files from there.

• Create a subdomain called sounds.yoursite.com and load all your MP3s from there... etc..

Nginx has great options for directly serving static files and managing the static files caching.

Here you are :

Button button = new Button(this);
// weight = 1f , gravity = GridLayout.FILL 
GridLayout.LayoutParams param= new GridLayout.LayoutParams(GridLayout.spec(
            GridLayout.UNDEFINED,GridLayout.FILL,1f),
            GridLayout.spec(GridLayout.UNDEFINED,GridLayout.FILL,1f));
// Layout_height = 0 ,Layout_weight = 0
params.height =0;                                                                                                           
params.width = 0;
button.setLayoutParams(param);

All This Work :)

Model

  public partial class ClientMessage
    {
        public int IdCon { get; set; } 
        public string Name { get; set; }
        public string Email { get; set; }  
    }

Controller

   public class TestAjaxBeginFormController : Controller{  

 projectNameEntities db = new projectNameEntities();

        public ActionResult Index(){  
            return View();
        }

        [HttpPost] 
        public ActionResult GetClientMessages(ClientMessage Vm) {
            var model = db.ClientMessages.Where(x => x.Name.Contains(Vm.Name));
            return PartialView("_PartialView", model);
        } 
}

View index.cshtml

@model  projectName.Models.ClientMessage 
@{ 
    Layout = null;
}

<script src="~/Scripts/jquery-1.9.1.js"></script>
<script src="~/Scripts/jquery.unobtrusive-ajax.js"></script>
<script>
    //\\\\\\\ JS  retrun message SucccessPost or FailPost
    function SuccessMessage() {
        alert("Succcess Post");
    }
    function FailMessage() {
        alert("Fail Post");
    } 
</script>

<h1>Page Index</h1> 

@using (Ajax.BeginForm("GetClientMessages", "TestAjaxBeginForm", null , new AjaxOptions
{
    HttpMethod = "POST",
    OnSuccess = "SuccessMessage",
    OnFailure = "FailMessage" ,
    UpdateTargetId = "resultTarget"  
}, new { id = "MyNewNameId" })) // set new Id name for  Form
{
    @Html.AntiForgeryToken()

    @Html.EditorFor(x => x.Name) 
     <input type="submit" value="Search" /> 

}


<div id="resultTarget">  </div>

View _PartialView.cshtml

@model  IEnumerable<projectName.Models.ClientMessage >
<table> 

@foreach (var item in Model) { 

    <tr> 
        <td>@Html.DisplayFor(modelItem => item.IdCon)</td>
        <td>@Html.DisplayFor(modelItem => item.Name)</td>
        <td>@Html.DisplayFor(modelItem => item.Email)</td>
    </tr>

}

</table>

The error TypeError: 'numpy.ndarray' object is not callable means that you tried to call a numpy array as a function. We can reproduce the error like so in the repl:

In [16]: import numpy as np

In [17]: np.array([1,2,3])()
---------------------------------------------------------------------------
TypeError                                 Traceback (most recent call last)
/home/user/<ipython-input-17-1abf8f3c8162> in <module>()
----> 1 np.array([1,2,3])()

TypeError: 'numpy.ndarray' object is not callable

If we are to assume that the error is indeed coming from the snippet of code that you posted (something that you should check,) then you must have reassigned either pd.rolling_mean or pd.rolling_std to a numpy array earlier in your code.

What I mean is something like this:

In [1]: import numpy as np

In [2]: import pandas as pd

In [3]: pd.rolling_mean(np.array([1,2,3]), 20, min_periods=5) # Works
Out[3]: array([ nan,  nan,  nan])

In [4]: pd.rolling_mean = np.array([1,2,3])

In [5]: pd.rolling_mean(np.array([1,2,3]), 20, min_periods=5) # Doesn't work anymore...
---------------------------------------------------------------------------
TypeError                                 Traceback (most recent call last)
/home/user/<ipython-input-5-f528129299b9> in <module>()
----> 1 pd.rolling_mean(np.array([1,2,3]), 20, min_periods=5) # Doesn't work anymore...

TypeError: 'numpy.ndarray' object is not callable

So, basically you need to search the rest of your codebase for pd.rolling_mean = ... and/or pd.rolling_std = ... to see where you may have overwritten them.

Thanks for this very useful script. I had some tiny problems running it on old systems (Red Hat Enterprise 3, which handle differently egrep and tabs in strings), and other systems with nothing in /etc/cron.d/ (the script then ended with an error). So here is a patch to make it work in such cases :

2a3,4
> #See:  http://stackoverflow.com/questions/134906/how-do-i-list-all-cron-jobs-for-all-users
>
27c29,30
<         match=$(echo "${line}" | egrep -o 'run-parts (-{1,2}\S+ )*\S+')
---
>         #match=$(echo "${line}" | egrep -o 'run-parts (-{1,2}\S+ )*\S+')
>         match=$(echo "${line}" | egrep -o 'run-parts.*')
51c54,57
< cat "${CRONDIR}"/* | clean_cron_lines >>"${temp}"  # */ <not a comment>
---
> sys_cron_num=$(ls /etc/cron.d | wc -l | awk '{print $1}')
> if [ "$sys_cron_num" != 0 ]; then
>       cat "${CRONDIR}"/* | clean_cron_lines >>"${temp}"  # */ <not a comment>
> fi
67c73
<     sed "1i\mi\th\td\tm\tw\tuser\tcommand" |
---
>     sed "1i\mi${tab}h${tab}d${tab}m${tab}w${tab}user${tab}command" |

I'm not really sure the changes in the first egrep are a good idea, but well, this script has been tested on RHEL3,4,5 and Debian5 without any problem. Hope this helps!

<div style="float: left;">Left Div</div>
<div style="float: right;">Right Div</div>

Http is stateless. In order to authorize you, you have to "sign" every single request you're sending to server.

Token authentication

• A request to the server is signed by a "token" - usually it means setting specific http headers, however, they can be sent in any part of the http request (POST body, etc.)

• Pros:

  • You can authorize only the requests you wish to authorize. (Cookies - even the authorization cookie are sent for every single request.)
  • Immune to XSRF (Short example of XSRF - I'll send you a link in email that will look like <img src="http://bank.com?withdraw=1000&to=myself" />, and if you're logged in via cookie authentication to bank.com, and bank.com doesn't have any means of XSRF protection, I'll withdraw money from your account simply by the fact that your browser will trigger an authorized GET request to that url.) Note there are anti forgery measure you can do with cookie-based authentication - but you have to implement those.
  • Cookies are bound to a single domain. A cookie created on the domain foo.com can't be read by the domain bar.com, while you can send tokens to any domain you like. This is especially useful for single page applications that are consuming multiple services that are requiring authorization - so I can have a web app on the domain myapp.com that can make authorized client-side requests to myservice1.com and to myservice2.com.
• Cons:
  • You have to store the token somewhere; while cookies are stored "out of the box". The locations that comes to mind are localStorage (con: the token is persisted even after you close browser window), sessionStorage (pro: the token is discarded after you close browser window, con: opening a link in a new tab will render that tab anonymous) and cookies (Pro: the token is discarded after you close the browser window. If you use a session cookie you will be authenticated when opening a link in a new tab, and you're immune to XSRF since you're ignoring the cookie for authentication, you're just using it as token storage. Con: cookies are sent out for every single request. If this cookie is not marked as https only, you're open to man in the middle attacks.)
  • It is slightly easier to do XSS attack against token based authentication (i.e. if I'm able to run an injected script on your site, I can steal your token; however, cookie based authentication is not a silver bullet either - while cookies marked as http-only can't be read by the client, the client can still make requests on your behalf that will automatically include the authorization cookie.)
  • Requests to download a file, which is supposed to work only for authorized users, requires you to use File API. The same request works out of the box for cookie-based authentication.

Cookie authentication

• A request to the server is always signed in by authorization cookie.
• Pros:
  • Cookies can be marked as "http-only" which makes them impossible to be read on the client side. This is better for XSS-attack protection.
  • Comes out of the box - you don't have to implement any code on the client side.
• Cons:
  • Bound to a single domain. (So if you have a single page application that makes requests to multiple services, you can end up doing crazy stuff like a reverse proxy.)
  • Vulnerable to XSRF. You have to implement extra measures to make your site protected against cross site request forgery.
  • Are sent out for every single request, (even for requests that don't require authentication).

Overall, I'd say tokens give you better flexibility, (since you're not bound to single domain). The downside is you have to do quite some coding by yourself.

I am not sure it may help everyone, but I could get around this by running

devenv.exe /ResetSettings 

...in the path {Visual_Studio_root}\Common7\Ide

I had the following errors in the event log and VS was just crashing and restarting all the time:

Faulting application name: devenv.exe, version: 14.0.25123.0, time stamp: 0x56f22f32
Faulting module name: clr.dll, version: 4.7.2115.0, time stamp: 0x59af88f2
Exception code: 0xc0000005
Fault offset: 0x0015f90e
Faulting process id: 0x3a7c
Faulting application start time: 0x01d353463eaf0c36
Faulting application path: C:\Program Files (x86)\Microsoft Visual Studio 14.0\Common7\IDE\devenv.exe
Faulting module path: C:\Windows\Microsoft.NET\Framework\v4.0.30319\clr.dll
Report Id: a232f984-6e80-4f61-9003-e18a035c8f93
Faulting package full name: 
Faulting package-relative application ID: 

The GNU C++ compiler has to make a decision where to put the vtable in case you have the definition of the virtual functions of an object spread across multiple compilations units (e.g. some of the objects virtual functions definitions are in a .cpp file others in another .cpp file, and so on).

The compiler chooses to put the vtable in the same place as where the first declared virtual function is defined.

Now if you for some reason forgot to provide a definition for that first virtual function declared in the object (or mistakenly forgot to add the compiled object at linking phase), you will get this error.

As a side effect, please note that only for this particular virtual function you won't get the traditional linker error like you are missing function foo.

I read about an experiment here: http://webreflection.blogspot.com/2010/12/100-client-side-image-resizing.html

The theory is that you can use canvas to resize the images on the client before uploading. The prototype example seems to work only in recent browsers, interesting idea though...

However, I’m not sure about using canvas to compress images, but you can certainly resize them.

Try this:

Project -> Properties -> Java Build Path -> Add Class Folder.

If it doesnt work, please be specific in what way your compilation fails, specifically post the error messages Eclipse returns, and i will know what to do about it.

Based on the comment marked as answer and patch recommended , as well as -> This version wants to convert the Days to Business-Hours ... Considers Same day hours as well.

 /// <summary>
    /// Calculates number of business days, taking into account:
    ///  - weekends (Saturdays and Sundays)
    ///  - bank holidays in the middle of the week
    /// </summary>
    /// <param name="firstDay">First day in the time interval</param>
    /// <param name="lastDay">Last day in the time interval</param>
    /// <param name="bankHolidays">List of bank holidays excluding weekends</param>
    /// <returns>Number of business hours during the 'span'</returns>
    public static int BusinessHoursUntil(DateTime firstDay, DateTime lastDay, params DateTime[] bankHolidays)
    {
        var original_firstDay = firstDay;
        var original_lastDay = lastDay;
        firstDay = firstDay.Date;
        lastDay = lastDay.Date;
        if (firstDay > lastDay)
            return -1; //// throw new ArgumentException("Incorrect last day " + lastDay);

        TimeSpan span = lastDay - firstDay;
        int businessDays = span.Days + 1;
        int fullWeekCount = businessDays / 7;
        // find out if there are weekends during the time exceedng the full weeks
        if (businessDays > fullWeekCount * 7)
        {
            // we are here to find out if there is a 1-day or 2-days weekend
            // in the time interval remaining after subtracting the complete weeks
            int firstDayOfWeek = firstDay.DayOfWeek == DayOfWeek.Sunday ? 7 : (int)firstDay.DayOfWeek;
            int lastDayOfWeek = lastDay.DayOfWeek == DayOfWeek.Sunday ? 7 : (int)lastDay.DayOfWeek;

            if (lastDayOfWeek < firstDayOfWeek)
                lastDayOfWeek += 7;
            if (firstDayOfWeek <= 6)
            {
                if (lastDayOfWeek >= 7)// Both Saturday and Sunday are in the remaining time interval
                    businessDays -= 2;
                else if (lastDayOfWeek >= 6)// Only Saturday is in the remaining time interval
                    businessDays -= 1;
            }
            else if (firstDayOfWeek <= 7 && lastDayOfWeek >= 7)// Only Sunday is in the remaining time interval
                businessDays -= 1;
        }

        // subtract the weekends during the full weeks in the interval
        businessDays -= fullWeekCount + fullWeekCount;

        if (bankHolidays != null && bankHolidays.Any())
        {
            // subtract the number of bank holidays during the time interval
            foreach (DateTime bankHoliday in bankHolidays)
            {
                DateTime bh = bankHoliday.Date;
                if (firstDay <= bh && bh <= lastDay)
                    --businessDays;
            }
        }

        int total_business_hours = 0;
        if (firstDay.Date == lastDay.Date)
        {//If on the same day, go granular with Hours from the Orginial_*Day values
            total_business_hours = (int)(original_lastDay - original_firstDay).TotalHours;
        }
        else
        {//Convert Business-Days to TotalHours
            total_business_hours = (int)(firstDay.AddDays(businessDays).AddHours(firstDay.Hour) - firstDay).TotalHours;
        }
        return total_business_hours;
    }

I had the same question, so I created Git Merger.
hope this helps :)

I solved this by clearing the jboss-x.y.z/server[config]/tmp and jboss-x.y.z/server/[config]/work directories.

I'm assuming that the buttons are supposed to be next to each other on the same line, they should not each be centered using the 'auto' margin, but placed inside a div with a defined width that has a margin '0 auto':

CSS:

#centerbuttons{
   width:250px; 
   margin:0 auto;
}       

HTML (after removing the margin properties from your buttons' CSS):

<div id="centerbuttons">
     <input value="Search" title="Search" type="submit"> 
     <input value="I'm Feeling Lucky" title="I'm Feeling Lucky" name="lucky" type="submit">
</div>

One way is to use a setter for the ngIf property and set the state as part of updating the value.

StackBlitz example

fade.component.ts

 import {
    animate,
    AnimationEvent,
    state,
    style,
    transition,
    trigger
  } from '@angular/animations';
  import { ChangeDetectionStrategy, Component, Input } from '@angular/core';

  export type FadeState = 'visible' | 'hidden';

  @Component({
    selector: 'app-fade',
    templateUrl: './fade.component.html',
    styleUrls: ['./fade.component.scss'],
    animations: [
      trigger('state', [
        state(
          'visible',
          style({
            opacity: '1'
          })
        ),
        state(
          'hidden',
          style({
            opacity: '0'
          })
        ),
        transition('* => visible', [animate('500ms ease-out')]),
        transition('visible => hidden', [animate('500ms ease-out')])
      ])
    ],
    changeDetection: ChangeDetectionStrategy.OnPush
  })
  export class FadeComponent {
    state: FadeState;
    // tslint:disable-next-line: variable-name
    private _show: boolean;
    get show() {
      return this._show;
    }
    @Input()
    set show(value: boolean) {
      if (value) {
        this._show = value;
        this.state = 'visible';
      } else {
        this.state = 'hidden';
      }
    }

    animationDone(event: AnimationEvent) {
      if (event.fromState === 'visible' && event.toState === 'hidden') {
        this._show = false;
      }
    }
  }

fade.component.html

 <div
    *ngIf="show"
    class="fade"
    [@state]="state"
    (@state.done)="animationDone($event)"
  >
    <button mat-raised-button color="primary">test</button>
  </div>

example.component.css

:host {
  display: block;
}
.fade {
  opacity: 0;
}

As mentioned here:

import urllib
urllib.urlretrieve ("http://randomsite.com/file.gz", "file.gz")

EDIT: If you still want to use requests, take a look at this question or this one.

I will soon released a new version of my app to support to galaxy ace.

You can download here: https://play.google.com/store/apps/details?id=droid.pr.coolflashlightfree

In order to solve your problem you should do this:

this._camera = Camera.open();     
this._camera.startPreview();
this._camera.autoFocus(new AutoFocusCallback() {
public void onAutoFocus(boolean success, Camera camera) {
}
});

Parameters params = this._camera.getParameters();
params.setFlashMode(Parameters.FLASH_MODE_ON);
this._camera.setParameters(params);

params = this._camera.getParameters();
params.setFlashMode(Parameters.FLASH_MODE_OFF);
this._camera.setParameters(params);

don't worry about FLASH_MODE_OFF because this will keep the light on, strange but it's true

to turn off the led just release the camera

Update 2019

In Bootstrap 4, flexbox can be used to get a full height layout that fills the remaining space.

First of all, the container (parent) needs to be full height:

Option 1_ Add a class for min-height: 100%;. Remember that min-height will only work if the parent has a defined height:

html, body {
  height: 100%;
}

.min-100 {
    min-height: 100%;
}

https://codeply.com/go/dTaVyMah1U

Option 2_ Use vh units:

.vh-100 {
    min-height: 100vh;
}

https://codeply.com/go/kMahVdZyGj

Also of Bootstrap 4.1, the vh-100 and min-vh-100 classes are included in Bootstrap so there is no need to for the extra CSS

Then, use flexbox direction column d-flex flex-column on the container, and flex-grow-1 on any child divs (ie: row) that you want to fill the remaining height.

Also see:
Bootstrap 4 Navbar and content fill height flexbox
Bootstrap - Fill fluid container between header and footer
How to make the row stretch remaining height

Maybe you were trying to do this?

#include <stdio.h>

int func(int * B){

    /* B + OFFSET = 5 () You are pointing to the same region as B[OFFSET] */
    *(B + 2) = 5;
}

int main(void) {

    int B[10];

    func(B);

    /* Let's say you edited only 2 and you want to show it. */
    printf("b[0] = %d\n\n", B[2]);

    return 0;
}

Basically you do the counts as sub-queries within a standard select.

An example would be the following, this returns 1 row, two columns

SELECT
 (SELECT COUNT(*) FROM MyTable WHERE MyCol = 'MyValue') AS MyTableCount,
 (SELECT COUNT(*) FROM YourTable WHERE MyCol = 'MyValue') AS YourTableCount,

$('html,body').animate({
  scrollTop: $('#answer-<%= @answer.id %>').offset().top - 50
}, 700);

Perform the following steps:

1. Start the Registry Editor by typing regedit in the Run window.
2. Select the following key in the registry: HKEY_LOCAL_MACHINE\SOFTWARE\ODBC.
3. In the Security menu, click Permissions.
4. Grant Full Permission to the account which is being used for making connections.
5. Quit the Registry Editor.

It just means "different of", some languages uses !=, others (like SQL) <>

'continue' is used within looping structures to skip the rest of the current loop iteration and continue execution at the condition evaluation and then the beginning of the next iteration.

'break' ends execution of the current for, foreach, while, do-while or switch structure.

break accepts an optional numeric argument which tells it how many nested enclosing structures are to be broken out of.

Check out the following links:

http://www.php.net/manual/en/control-structures.break.php

http://www.php.net/manual/en/control-structures.continue.php

Hope it helps..

I'm using Spring STS plugin and a Spring webmvc template project. I had to install the Maven m2e plugin first: http://www.eclipse.org/m2e/

And then clean the project. Under Project -> Clean...

I believe you are looking for -maxdepth 1.

Build > Run Code Analysis

Hotkey : Alt+F11

Helped me catch Razor errors.

it might sound strange but for me worked restarting my mac..i cant explain why and what happened but it works now. hope it will helps someone

Try this query here:

SELECT * FROM sys.schemas

This will give you the name and schema_id for all defines schemas in the database you execute this in.

I don't really know what you mean by querying the "schema API" - these sys. catalog views (in the sys schema) are your best bet for any system information about databases and objects in those databases.

Like others have stated, regex will not work. Take a moment to read my article about why you cannot and should not try to parse html with regex, which is what you're doing when you're attempting to strip html from your source string.

I created this a few months ago for a project.

 ".+?"|[^"]+?(?=,)|(?<=,)[^"]+

It works in C# and the Debuggex was happy when I selected Python and PCRE. Javascript doesn't recognize this form of Proceeded By ?<=....

For your values, it will create matches on

123
,2.99
,AMO024
,Title
"Description, more info"
,
,123987564

Note that anything in quotes doesn't have a leading comma, but attempting to match with a leading comma was required for the empty value use case. Once done, trim values as necessary.

I use RegexHero.Net to test my Regex.

Arrays can't be passed as function parameters by value in C.

You can put the array in a struct:

typedef struct type24 {
    char byte[3];
} type24;

and then pass that by value, but of course then it's less convenient to use: x.byte[0] instead of x[0].

Your function type24_to_int32(char value[3]) actually passes by pointer, not by value. It's exactly equivalent to type24_to_int32(char *value), and the 3 is ignored.

If you're happy passing by pointer, you could stick with the array and do:

type24_to_int32(const type24 *value);

This will pass a pointer-to-array, not pointer-to-first-element, so you use it as:

(*value)[0]

I'm not sure that's really a gain, since if you accidentally write value[1] then something stupid happens.

The solutions above are right but might crash in FireFox and Safari! and that's what webility.js is trying to solve. Check the toUTC function, it works on most of the main browers and it returns the time in ISO format

Is there a way to unmarshal the nested bar property and assign it directly to a struct property without creating a nested struct?

No, encoding/json cannot do the trick with ">some>deep>childnode" like encoding/xml can do. Nested structs is the way to go.

First, you need to convert your URI object to URL object, and then use File object to retrieve a file name:

try
    {
        URL videoUrl = uri.toURL();
        File tempFile = new File(videoUrl.getFile());
        String fileName = tempFile.getName();
    }
    catch (Exception e)
    {

    }

That's it, very easy.

It's simple. I did it the following way to get a string with unique values (from two columns of an output sheet):

Dim startpoint, endpoint, ArrCount As Integer
Dim SentToArr() As String

'created by running the first part (check for new entries)
startpoint = ThisWorkbook.Sheets("temp").Range("A1").Value
'set counter on 0
Arrcount = 0 
'last filled row in BG
endpoint = ThisWorkbook.Sheets("BG").Range("G1047854").End(xlUp).Row

'create arr with all data - this could be any data you want!
With ThisWorkbook.Sheets("BG")
    For i = startpoint To endpoint
        ArrCount = ArrCount + 1
        ReDim Preserve SentToArr(1 To ArrCount)
        SentToArr(ArrCount) = .Range("A" & i).Value
        'get prep
        ArrCount = ArrCount + 1
        ReDim Preserve SentToArr(1 To ArrCount)
        SentToArr(ArrCount) = .Range("B" & i).Value
    Next i
End With

'iterate the arr and get a key (l) in each iteration
For l = LBound(SentToArr) To UBound(SentToArr)
    Key = SentToArr(l)
    'iterate one more time and compare the first key (l) with key (k)
    For k = LBound(SentToArr) To UBound(SentToArr)
        'if key = the new key from the second iteration and the position is different fill it as empty
        If Key = SentToArr(k) And Not k = l Then
            SentToArr(k) = ""
        End If
    Next k
Next l

'iterate through all 'unique-made' values, if the value of the pos is 
'empty, skip - you could also create a new array by using the following after the IF below - !! dont forget to reset [ArrCount] as well:
'ArrCount = ArrCount + 1
'ReDim Preserve SentToArr(1 To ArrCount)
'SentToArr(ArrCount) = SentToArr(h)

For h = LBound(SentToArr) To UBound(SentToArr)
    If SentToArr(h) = "" Then GoTo skipArrayPart
    GetEmailArray = GetEmailArray & "; " & SentToArr(h)
skipArrayPart:
Next h

'some clean up
If Left(GetEmailArray, 2) = "; " Then
    GetEmailArray = Right(GetEmailArray, Len(GetEmailArray) - 2)
End If

'show us the money
MsgBox GetEmailArray

Did you try Processas mentioned here: http://msdn.microsoft.com/de-de/library/system.diagnostics.process.aspx?

You could use

Process myProcess = new Process();

try
{
    // true is the default, but it is important not to set it to false
    myProcess.StartInfo.UseShellExecute = true; 
    myProcess.StartInfo.FileName = "http://some.domain.tld/bla";
    myProcess.Start();
}
catch (Exception e)
{
    Console.WriteLine(e.Message);
}

I would accept ldav1s' answer if I were you, but I just want to point out that 'else if' can be written in terms of 'else's and 'if's in any language:

if HAVE_CLIENT
  libtest_LIBS = $(top_builddir)/libclient.la
else
  if HAVE_SERVER
    libtest_LIBS = $(top_builddir)/libserver.la
  else
    libtest_LIBS = 
  endif
endif

(The indentation is for clarity. Don't indent the lines, they won't work.)

The easiest way is to just learn how to do DOM traversing and manipulation with the plain DOM api (you would probably call this: normal JavaScript).

This can however be a pain for some things. (which is why libraries were invented in the first place).

Googling for "javascript DOM traversing/manipulation" should present you with plenty of helpful (and some less helpful) resources.

The articles on this website are pretty good: http://www.htmlgoodies.com/primers/jsp/

And as Nosredna points out in the comments: be sure to test in all browsers, because now jQuery won't be handling the inconsistencies for you.

Here is a portable shell function that should work in ANY Bourne comparable shell. It will resolve the relative path punctuation ".. or ." and dereference symbolic links.

If for some reason you do not have a realpath(1) command, or readlink(1) this can be aliased.

which realpath || alias realpath='real_path'

Enjoy:

real_path () {
  OIFS=$IFS
  IFS='/'
  for I in $1
  do
    # Resolve relative path punctuation.
    if [ "$I" = "." ] || [ -z "$I" ]
      then continue
    elif [ "$I" = ".." ]
      then FOO="${FOO%%/${FOO##*/}}"
           continue
      else FOO="${FOO}/${I}"
    fi

    ## Resolve symbolic links
    if [ -h "$FOO" ]
    then
    IFS=$OIFS
    set `ls -l "$FOO"`
    while shift ;
    do
      if [ "$1" = "->" ]
        then FOO=$2
             shift $#
             break
      fi
    done
    IFS='/'
    fi
  done
  IFS=$OIFS
  echo "$FOO"
}

also, just in case anybody is interested here is how to implement basename and dirname in 100% pure shell code:

## http://www.opengroup.org/onlinepubs/000095399/functions/dirname.html
# the dir name excludes the least portion behind the last slash.
dir_name () {
  echo "${1%/*}"
}

## http://www.opengroup.org/onlinepubs/000095399/functions/basename.html
# the base name excludes the greatest portion in front of the last slash.
base_name () {
  echo "${1##*/}"
}

You can find updated version of this shell code at my google site: http://sites.google.com/site/jdisnard/realpath

EDIT: This code is licensed under the terms of the 2-clause (freeBSD style) license. A copy of the license may be found by following the above hyperlink to my site.

In my case, I had a collection of radio buttons that needed to be in a group. I just included a 'Selected' property in the model. Then, in the loop to output the radiobuttons just do...

@Html.RadioButtonFor(m => Model.Selected, Model.Categories[i].Title)

This way, the name is the same for all radio buttons. When the form is posted, the 'Selected' property is equal to the category title (or id or whatever) and this can be used to update the binding on the relevant radiobutton, like this...

model.Categories.Find(m => m.Title.Equals(model.Selected)).Selected = true;

May not be the best way, but it does work.

Another method utilizing the dplyr package:

library(dplyr)
df <- mtcars %>%
        filter(mpg > 25)

Without the chain (%>%) operator:

library(dplyr)
df <- filter(mtcars, mpg > 25)

My problem was selinux...

Go sestatus

If Current mode: enforcing

Then chcon -R -t httpd_sys_rw_content_t /var/www/html

Try this : MyTextBox.Focus ( );

If you want to use requirements.txt file, you will need git and something like the entry below to anonymously fetch the master branch in your requirements.txt.

For regular install:

git+git://github.com/celery/django-celery.git

For "editable" install:

-e git://github.com/celery/django-celery.git#egg=django-celery

Editable mode downloads the project's source code into ./src in the current directory. It allows pip freeze to output the correct github location of the package.

I believe Quassnoi has answered your direct question. Just a side note: Maybe this is just some awkward wording on your part, but you seem to be under the impression that you have three primary keys, one on each field. This is not the case. By definition, you can only have one primary key. What you have here is a primary key that is a composite of three fields. Thus, you cannot "drop the primary key on a column". You can drop the primary key, or not drop the primary key. If you want a primary key that only includes one column, you can drop the existing primary key on 3 columns and create a new primary key on 1 column.

Although often we are used to seeing objects with public properties without any access control, JavaScript allows us to accurately describe properties. In fact, we can use descriptors in order to control how a property can be accessed and which logic we can apply to it. Consider the following example:

var employee = {
    first: "Boris",
    last: "Sergeev",
    get fullName() {
        return this.first + " " + this.last;
    },
    set fullName(value) {
        var parts = value.toString().split(" ");
        this.first = parts[0] || "";
        this.last = parts[1] || "";
    },
    email: "[email protected]"
};

The final result:

console.log(employee.fullName); //Boris Sergeev
employee.fullName = "Alex Makarenko";

console.log(employee.first);//Alex
console.log(employee.last);//Makarenko
console.log(employee.fullName);//Alex Makarenko

I suggest you should use one of the mappers' libraries: Mapstruct, ModelMapper, etc. With Mapstruct your mapper will look like:

@Mapper
public interface UserMapper {     
    UserMapper INSTANCE = Mappers.getMapper( UserMapper.class ); 

    UserDTO toDto(User user);
}

The real object with all getters and setters will be automatically generated from this interface. You can use it like:

UserDTO userDTO = UserMapper.INSTANCE.toDto(user);

You can also add some logic for your activeText filed using @AfterMapping annotation.

Setting windowLightStatusBar to true not works with Mi phones, some Meizu phones, Blackview phones, WileyFox etc. I've found such hack for Mi and Meizu devices. This is not a comprehensive solution of this perfomance problem, but maybe it would be useful to somebody.

And I think, it would be better to tell your customer that coloring status bar (for example) white - is not a good idea. instead of using different hacks it would be better to define appropriate colorPrimaryDark according to the guidelines

You can use CSS3 transitions with rotate() to spin the image on hover.

Rotating image :

img {_x000D_
  border-radius: 50%;_x000D_
  -webkit-transition: -webkit-transform .8s ease-in-out;_x000D_
          transition:         transform .8s ease-in-out;_x000D_
}_x000D_
img:hover {_x000D_
  -webkit-transform: rotate(360deg);_x000D_
          transform: rotate(360deg);_x000D_
}

<img src="https://i.stack.imgur.com/BLkKe.jpg" width="100" height="100"/>

Here is a fiddle DEMO

More info and references :

• a guide about CSS transitions on MDN
• a guide about CSS transforms on MDN
• browser support table for 2d transforms on caniuse.com
• browser support table for transitions on caniuse.com

Finally find out the problem:
the port 443 was listening on HTTP instead of HTTPS, changed to HTTPS solved my issue.

Create a new "Empty Project" , Add your Cpp file to the new project, delete the line that includes stdafx.

Done.

The project no longer needs the stdafx. It is added automatically when you create projects with installed templates.

ok. I personally hated all of these options. Therefore I came up with my own.

Based on the information I have seen. It appears that the Previous view controller is in control of its own "Back" button that will be presented on the pushed view controller.

I have created a Lazy Load method for the navigationItem on the controller that wants the changed Back Button.

Mine is an Invite Buyer Controller

Invite Buyer is the text that is set by default.

but the back button needed to be Invite

Here is the code that I used to create the back button.

I placed this code in the top of the Controller's Implementatio (.m) file and it overrode the super's method automatically.

- (UINavigationItem *)navigationItem{
    UINavigationItem *item = [super navigationItem];
    if (item != nil && item.backBarButtonItem == nil)
    {
        item.backBarButtonItem = [[[UIBarButtonItem alloc] init] autorelease];
        item.backBarButtonItem.title = @"Invite";
    }

    return item;
}

I feel this is a much more elegant way to accomplish this.

I place this code in one place, and it automatically gets populated when needed.

No need to call the code before each push request.

Hope this helps

The -H 'Cache-Control: no-cache' argument is not guaranteed to work because the remote server or any proxy layers in between can ignore it. If it doesn't work, you can do it the old-fashioned way, by adding a unique querystring parameter. Usually, the servers/proxies will think it's a unique URL and not use the cache.

curl "http://www.example.com?foo123"

You have to use a different querystring value every time, though. Otherwise, the server/proxies will match the cache again. To automatically generate a different querystring parameter every time, you can use date +%s, which will return the seconds since epoch.

curl "http://www.example.com?$(date +%s)"

zip is its own inverse! Provided you use the special * operator.

>>> zip(*[('a', 1), ('b', 2), ('c', 3), ('d', 4)])
[('a', 'b', 'c', 'd'), (1, 2, 3, 4)]

The way this works is by calling zip with the arguments:

zip(('a', 1), ('b', 2), ('c', 3), ('d', 4))

… except the arguments are passed to zip directly (after being converted to a tuple), so there's no need to worry about the number of arguments getting too big.

To have the code within one line, try this:

startActivity(new Intent(Intent.ACTION_CALL, Uri.parse("tel:123456789")));

along with the proper manifest permission:

<uses-permission android:name="android.permission.CALL_PHONE"></uses-permission>

Hope this helps!

Digital Ocean MySql 2002-no-such-file-or-directory

Add this end of file /etc/mysql/my.cnf

[mysqld]
innodb_force_recovery = 1

Restart MySql

service mysql restart

Because otherwise, it would need an instance of the object to be executed. But it must be called from scratch, without constructing the object first, since it is usually the task of the main() function (bootstrap), to parse the arguments and construct the object, usually by using these arguments/program parameters.

You can try this

String text = "ddd123.0114cc";
    String numOnly = text.replaceAll("\\p{Alpha}","");
    try {
        double numVal = Double.valueOf(numOnly);
        System.out.println(text +" contains numbers");
    } catch (NumberFormatException e){
        System.out.println(text+" not contains numbers");
    }     

We can hide the content inside a by using the following inline css:

<div style="visibility:hidden"></div>

for example:

<td><div style="visibility:hidden">Your Content Goes Here:</div></td>

As others have said, there is no universally correct block size; what is optimal for one situation or one piece of hardware may be terribly inefficient for another. Also, depending on the health of the disks it may be preferable to use a different block size than what is "optimal".

One thing that is pretty reliable on modern hardware is that the default block size of 512 bytes tends to be almost an order of magnitude slower than a more optimal alternative. When in doubt, I've found that 64K is a pretty solid modern default. Though 64K usually isn't THE optimal block size, in my experience it tends to be a lot more efficient than the default. 64K also has a pretty solid history of being reliably performant: You can find a message from the Eug-Lug mailing list, circa 2002, recommending a block size of 64K here: http://www.mail-archive.com/[email protected]/msg12073.html

For determining THE optimal output block size, I've written the following script that tests writing a 128M test file with dd at a range of different block sizes, from the default of 512 bytes to a maximum of 64M. Be warned, this script uses dd internally, so use with caution.

dd_obs_test.sh:

#!/bin/bash

# Since we're dealing with dd, abort if any errors occur
set -e

TEST_FILE=${1:-dd_obs_testfile}
TEST_FILE_EXISTS=0
if [ -e "$TEST_FILE" ]; then TEST_FILE_EXISTS=1; fi
TEST_FILE_SIZE=134217728

if [ $EUID -ne 0 ]; then
  echo "NOTE: Kernel cache will not be cleared between tests without sudo. This will likely cause inaccurate results." 1>&2
fi

# Header
PRINTF_FORMAT="%8s : %s\n"
printf "$PRINTF_FORMAT" 'block size' 'transfer rate'

# Block sizes of 512b 1K 2K 4K 8K 16K 32K 64K 128K 256K 512K 1M 2M 4M 8M 16M 32M 64M
for BLOCK_SIZE in 512 1024 2048 4096 8192 16384 32768 65536 131072 262144 524288 1048576 2097152 4194304 8388608 16777216 33554432 67108864
do
  # Calculate number of segments required to copy
  COUNT=$(($TEST_FILE_SIZE / $BLOCK_SIZE))

  if [ $COUNT -le 0 ]; then
    echo "Block size of $BLOCK_SIZE estimated to require $COUNT blocks, aborting further tests."
    break
  fi

  # Clear kernel cache to ensure more accurate test
  [ $EUID -eq 0 ] && [ -e /proc/sys/vm/drop_caches ] && echo 3 > /proc/sys/vm/drop_caches

  # Create a test file with the specified block size
  DD_RESULT=$(dd if=/dev/zero of=$TEST_FILE bs=$BLOCK_SIZE count=$COUNT conv=fsync 2>&1 1>/dev/null)

  # Extract the transfer rate from dd's STDERR output
  TRANSFER_RATE=$(echo $DD_RESULT | \grep --only-matching -E '[0-9.]+ ([MGk]?B|bytes)/s(ec)?')

  # Clean up the test file if we created one
  if [ $TEST_FILE_EXISTS -ne 0 ]; then rm $TEST_FILE; fi

  # Output the result
  printf "$PRINTF_FORMAT" "$BLOCK_SIZE" "$TRANSFER_RATE"
done

View on GitHub

I've only tested this script on a Debian (Ubuntu) system and on OSX Yosemite, so it will probably take some tweaking to make work on other Unix flavors.

By default the command will create a test file named dd_obs_testfile in the current directory. Alternatively, you can provide a path to a custom test file by providing a path after the script name:

$ ./dd_obs_test.sh /path/to/disk/test_file

The output of the script is a list of the tested block sizes and their respective transfer rates like so:

$ ./dd_obs_test.sh
block size : transfer rate
       512 : 11.3 MB/s
      1024 : 22.1 MB/s
      2048 : 42.3 MB/s
      4096 : 75.2 MB/s
      8192 : 90.7 MB/s
     16384 : 101 MB/s
     32768 : 104 MB/s
     65536 : 108 MB/s
    131072 : 113 MB/s
    262144 : 112 MB/s
    524288 : 133 MB/s
   1048576 : 125 MB/s
   2097152 : 113 MB/s
   4194304 : 106 MB/s
   8388608 : 107 MB/s
  16777216 : 110 MB/s
  33554432 : 119 MB/s
  67108864 : 134 MB/s

(Note: The unit of the transfer rates will vary by OS)

To test optimal read block size, you could use more or less the same process, but instead of reading from /dev/zero and writing to the disk, you'd read from the disk and write to /dev/null. A script to do this might look like so:

dd_ibs_test.sh:

#!/bin/bash

# Since we're dealing with dd, abort if any errors occur
set -e

TEST_FILE=${1:-dd_ibs_testfile}
if [ -e "$TEST_FILE" ]; then TEST_FILE_EXISTS=$?; fi
TEST_FILE_SIZE=134217728

# Exit if file exists
if [ -e $TEST_FILE ]; then
  echo "Test file $TEST_FILE exists, aborting."
  exit 1
fi
TEST_FILE_EXISTS=1

if [ $EUID -ne 0 ]; then
  echo "NOTE: Kernel cache will not be cleared between tests without sudo. This will likely cause inaccurate results." 1>&2
fi

# Create test file
echo 'Generating test file...'
BLOCK_SIZE=65536
COUNT=$(($TEST_FILE_SIZE / $BLOCK_SIZE))
dd if=/dev/urandom of=$TEST_FILE bs=$BLOCK_SIZE count=$COUNT conv=fsync > /dev/null 2>&1

# Header
PRINTF_FORMAT="%8s : %s\n"
printf "$PRINTF_FORMAT" 'block size' 'transfer rate'

# Block sizes of 512b 1K 2K 4K 8K 16K 32K 64K 128K 256K 512K 1M 2M 4M 8M 16M 32M 64M
for BLOCK_SIZE in 512 1024 2048 4096 8192 16384 32768 65536 131072 262144 524288 1048576 2097152 4194304 8388608 16777216 33554432 67108864
do
  # Clear kernel cache to ensure more accurate test
  [ $EUID -eq 0 ] && [ -e /proc/sys/vm/drop_caches ] && echo 3 > /proc/sys/vm/drop_caches

  # Read test file out to /dev/null with specified block size
  DD_RESULT=$(dd if=$TEST_FILE of=/dev/null bs=$BLOCK_SIZE 2>&1 1>/dev/null)

  # Extract transfer rate
  TRANSFER_RATE=$(echo $DD_RESULT | \grep --only-matching -E '[0-9.]+ ([MGk]?B|bytes)/s(ec)?')

  printf "$PRINTF_FORMAT" "$BLOCK_SIZE" "$TRANSFER_RATE"
done

# Clean up the test file if we created one
if [ $TEST_FILE_EXISTS -ne 0 ]; then rm $TEST_FILE; fi

View on GitHub

An important difference in this case is that the test file is a file that is written by the script. Do not point this command at an existing file or the existing file will be overwritten with zeroes!

For my particular hardware I found that 128K was the most optimal input block size on a HDD and 32K was most optimal on a SSD.

Though this answer covers most of my findings, I've run into this situation enough times that I wrote a blog post about it: http://blog.tdg5.com/tuning-dd-block-size/ You can find more specifics on the tests I performed there.

Remove the padding:

padding-left: 0;

In recent Visual Studio Code versions you can find settings here:

Menu File → Preference → Settings → Text Editor → Files → (scroll down a bit) Trim Trailing Whitespace

This is for trimming whitespace when saving a file.

Or you can search "Trim Trailing Whitespace" in the top search bar.

Try "sudo mysql -u root -p" please.

Which server are you using?

Like already said:

1. In your debug configuration you'll have to define the right port of your server (GF:9009 / Tomcat:8000)
2. You'll have to set the JVM property of the server to debug

For Glassfish:

    Log in to admin-console > Configurations > server-config > JVM-Settings > check DEBUG checkbox > restart server

For Tomcat:

create file debug.bat/.sh (depending on your OS) in %TOMCAT_HOME%/bin directory and write

    set JPDA_ADDRESS=8000
    set JPDA_TRANSPORT=dt_socket
    catalina.bat jpda start

in it.

After you've created this file start server by executing debug.bat/.sh.

Now you should be able to debug remotely in Eclipse after you set the necessary properties in your debug configuration.

Hope this helped! Have Fun!

EDIT

If you're running tomcat in a Win environment as a service you don't have a catalina.bat file in the bin-directory of your tomcat installation.
To set your server into debug-mode please try the following:

1. Run the Configuration option in Windows Menu or run %catalina_home%/bin/tomcat6w.exe
2. In Java tab, add this line to Java:

options:-Xrunjdwp:transport=dt_socket,address=8000,server=y,suspend=n

One of the way I like is this one , but may be good for small files

with open(fileName,'r') as content_file:
    content = content_file.read()
    lineCount = len(re.split("\n",content))
    words = re.split("\W+",content.lower())

To count words, there is two way, if you don't care about repetition you can just do

words_count = len(words)

if you want the counts of each word you can just do

import collections
words_count = collections.Counter(words) #Count the occurrence of each word

I'm unsing ubuntu 14.04

Below command solved this problem for me.

sudo apt-get install php-mysql

In my case, after updating my php version from 5.5.9 to 7.0.8 i received this error including two other errors.

errors:

1. laravel/framework v5.2.14 requires ext-mbstring * -> the requested PHP extension mbstring is missing from your system.

2. phpunit/phpunit 4.8.22 requires ext-dom * -> the requested PHP extension dom is missing from your system.

3. [PDOException]
   could not find driver

Solutions:

I installed this packages and my problems are gone.

sudo apt-get install php-mbstring

sudo apt-get install php-xml

sudo apt-get install php-mysql

I think the basic data structure is different

1. Protocol Buffer use variable-length integee which refers to variable-length digital encoding, turning a fixed-length number into a variable-length number to save space.
2. Thrift proposed different types of serialization formats (called "protocols"). In fact, Thrift has two different JSON encodings, and no less than three different binary encoding methods.

In conclusion,these two libraries are completely different. Thrift likes a one-stop shop, giving you the entire integrated RPC framework and many options (supporting cross-language), while Protocol Buffers is more inclined to "just do one thing and do it well".

Here you can download adt bundles 2014-07-02:

windows 32 bit: https://dl.google.com/android/adt/adt-bundle-windows-x86-20140702.zip

windows 64 bit: https://dl.google.com/android/adt/adt-bundle-windows-x86_64-20140702.zip

MacOS 64 bit: https://dl.google.com/android/adt/adt-bundle-mac-x86_64-20140702.zip

Linux 32 bit: https://dl.google.com/android/adt/adt-bundle-linux-x86-20140702.zip

Linux 64 bit: https://dl.google.com/android/adt/adt-bundle-linux-x86_64-20140702.zip

Extension method based on Linq

public static void DeleteRows(this DataTable dt, Func<DataRow, bool> predicate)
{
    foreach (var row in dt.Rows.Cast<DataRow>().Where(predicate).ToList())
        row.Delete();
}

Then use:

DataTable dt = GetSomeData();
dt.DeleteRows(r => r.Field<double>("Amount") > 123.12 && r.Field<string>("ABC") == "XYZ");

The only way I know of doing development in Linux for the iPhone would be to install Vmware and work on getting OS X running in a virtual machine. With that said there are some "legal" concerns in doing that. It is reported that OS X Server can be virtualized but as far as the development story on that I don't know.

If you are truly serious, that's the what I'd investigate.

Good luck.

I had this issue after converting my Write-Host cmdlets to Write-Information and I was missing quotes and parens around the parameters. The cmdlet signatures are evidently not the same.

Write-Host this is a good idea $here
Write-Information this is a good idea $here <=BAD

This is the cmdlet signature that corrected after spending 20-30 minutes digging down the function stack...

Write-Information ("this is a good idea $here") <=GOOD

Directory can be created using file module only, as directory is nothing but a file.

# create a directory if it doesn't exist
- file:
    path: /etc/some_directory
    state: directory
    mode: 0755
    owner: foo
    group: foo

I ran into a couple of problems when I tried converting Kevin Fairchild's suggestion to work with strings containing spaces and special XML characters (&, <, >) which were encoded.

The final version of my code (which doesn't answer the original question but may be useful to someone) looks like this:

CREATE TABLE #YourTable ([ID] INT, [Name] VARCHAR(MAX), [Value] INT)

INSERT INTO #YourTable ([ID],[Name],[Value]) VALUES (1,'Oranges & Lemons',4)
INSERT INTO #YourTable ([ID],[Name],[Value]) VALUES (1,'1 < 2',8)
INSERT INTO #YourTable ([ID],[Name],[Value]) VALUES (2,'C',9)

SELECT  [ID],
  STUFF((
    SELECT ', ' + CAST([Name] AS VARCHAR(MAX))
    FROM #YourTable WHERE (ID = Results.ID) 
    FOR XML PATH(''),TYPE 
     /* Use .value to uncomment XML entities e.g. &gt; &lt; etc*/
    ).value('.','VARCHAR(MAX)') 
  ,1,2,'') as NameValues
FROM    #YourTable Results
GROUP BY ID

DROP TABLE #YourTable

Rather than using a space as a delimiter and replacing all the spaces with commas, it just pre-pends a comma and space to each value then uses STUFF to remove the first two characters.

The XML encoding is taken care of automatically by using the TYPE directive.

An inner class is a friend of the class it is defined within.
So, yes; an object of type Outer::Inner can access the member variable var of an object of type Outer.

Unlike Java though, there is no correlation between an object of type Outer::Inner and an object of the parent class. You have to make the parent child relationship manually.

#include <string>
#include <iostream>

class Outer
{
    class Inner
    {
        public:
            Inner(Outer& x): parent(x) {}
            void func()
            {
                std::string a = "myconst1";
                std::cout << parent.var << std::endl;

                if (a == MYCONST)
                {   std::cout << "string same" << std::endl;
                }
                else
                {   std::cout << "string not same" << std::endl;
                }
            }
        private:
            Outer&  parent;
    };

    public:
        Outer()
            :i(*this)
            ,var(4)
        {}
        Outer(Outer& other)
            :i(other)
            ,var(22)
        {}
        void func()
        {
            i.func();
        }
    private:
        static const char* const MYCONST;
        Inner i;
        int var;
};

const char* const Outer::MYCONST = "myconst";

int main()
{

    Outer           o1;
    Outer           o2(o1);
    o1.func();
    o2.func();
}

You may also find a global .gitignore directly at the ~ path if you haven't created it in your folder project. This file is taken into account by all your .git projects.

if You are using browser it default always works on get, u can work with postman tool,otherwise u can change it to getmapping.hope this will works

I think jdk has certain features which can be used along with particular framework. Well call it SDK as a whole.

Like Android or Blackberry both use java along with their framework.

preferred way, using MySQLi extension:

$mysqli = new mysqli(SERVER, DBUSER, DBPASS, DATABASE);
$result = $mysqli->query("SELECT id FROM mytable WHERE city = 'c7'");
if($result->num_rows == 0) {
     // row not found, do stuff...
} else {
    // do other stuff...
}
$mysqli->close();

deprecated:

$result = mysql_query("SELECT id FROM mytable WHERE city = 'c7'");
if(mysql_num_rows($result) == 0) {
     // row not found, do stuff...
} else {
    // do other stuff...
}

Based on @Sid's good answer.

Before concatenating, you can load csv files into an intermediate dictionary which gives access to each data set based on the file name (in the form dict_of_df['filename.csv']). Such a dictionary can help you identify issues with heterogeneous data formats, when column names are not aligned for example.

Import modules and locate file paths:

import os
import glob
import pandas
from collections import OrderedDict
path =r'C:\DRO\DCL_rawdata_files'
filenames = glob.glob(path + "/*.csv")

Note: OrderedDict is not necessary, but it'll keep the order of files which might be useful for analysis.

Load csv files into a dictionary. Then concatenate:

dict_of_df = OrderedDict((f, pandas.read_csv(f)) for f in filenames)
pandas.concat(dict_of_df, sort=True)

Keys are file names f and values are the data frame content of csv files. Instead of using f as a dictionary key, you can also use os.path.basename(f) or other os.path methods to reduce the size of the key in the dictionary to only the smaller part that is relevant.

GitHub Repositories are used to store all the files, folders and other resources which you care about.

Git Project : It is also one of the Resource in Git Repository and main use of it is to manage the projects with a visual board. If you create a project in Git Repository it create a visual board like a Kanban board to manage the project.

In this way, you can have multiple projects in a repository.

Using the standard CustomCreationConverter, I was struggling to work how to generate the correct type (Person or Employee), because in order to determine this you need to analyse the JSON and there is no built in way to do this using the Create method.

I found a discussion thread pertaining to type conversion and it turned out to provide the answer. Here is a link: Type converting.

What's required is to subclass JsonConverter, overriding the ReadJson method and creating a new abstract Create method which accepts a JObject.

The JObject class provides a means to load a JSON object and provides access to the data within this object.

The overridden ReadJson method creates a JObject and invokes the Create method (implemented by our derived converter class), passing in the JObject instance.

This JObject instance can then be analysed to determine the correct type by checking existence of certain fields.

Example

string json = "[{
        \"Department\": \"Department1\",
        \"JobTitle\": \"JobTitle1\",
        \"FirstName\": \"FirstName1\",
        \"LastName\": \"LastName1\"
    },{
        \"Department\": \"Department2\",
        \"JobTitle\": \"JobTitle2\",
        \"FirstName\": \"FirstName2\",
        \"LastName\": \"LastName2\"
    },
        {\"Skill\": \"Painter\",
        \"FirstName\": \"FirstName3\",
        \"LastName\": \"LastName3\"
    }]";

List<Person> persons = 
    JsonConvert.DeserializeObject<List<Person>>(json, new PersonConverter());

...

public class PersonConverter : JsonCreationConverter<Person>
{
    protected override Person Create(Type objectType, JObject jObject)
    {
        if (FieldExists("Skill", jObject))
        {
            return new Artist();
        }
        else if (FieldExists("Department", jObject))
        {
            return new Employee();
        }
        else
        {
            return new Person();
        }
    }

    private bool FieldExists(string fieldName, JObject jObject)
    {
        return jObject[fieldName] != null;
    }
}

public abstract class JsonCreationConverter<T> : JsonConverter
{
    /// <summary>
    /// Create an instance of objectType, based properties in the JSON object
    /// </summary>
    /// <param name="objectType">type of object expected</param>
    /// <param name="jObject">
    /// contents of JSON object that will be deserialized
    /// </param>
    /// <returns></returns>
    protected abstract T Create(Type objectType, JObject jObject);

    public override bool CanConvert(Type objectType)
    {
        return typeof(T).IsAssignableFrom(objectType);
    }

    public override bool CanWrite
    {
        get { return false; }
    }

    public override object ReadJson(JsonReader reader, 
                                    Type objectType, 
                                     object existingValue, 
                                     JsonSerializer serializer)
    {
        // Load JObject from stream
        JObject jObject = JObject.Load(reader);

        // Create target object based on JObject
        T target = Create(objectType, jObject);

        // Populate the object properties
        serializer.Populate(jObject.CreateReader(), target);

        return target;
    }
}

1. you need to create and id for the buttons you need to refference: btn1.setId(1);
2. you can use the params variable to add parameters to your layout, i think the method is addRule(), check out the android java docs for this LayoutParams object.

The 'sed' solutions mentioned earlier are nice but as mentioned not 100% secure

• You may have INSERT commands with data containing: ... CREATE TABLE...(whatever)...mytable...

• or even the exact string "CREATE TABLE `mytable`;" if you are storing DML commands for instance!

(and if the table is huge you don't want to check that manually)

I would verify the exact syntax of the dump version used, and have a more restrictive pattern search:

Avoid ".*" and use "^" to ensure we start at the begining of the line. And I'd prefer to grab the initial 'DROP'

All in all, this works better for me:

sed -n -e '/^DROP TABLE IF EXISTS \`mytable\`;/,/^UNLOCK TABLES;/p' mysql.dump > mytable.dump

There are two options for creating and updating databases.

One is to create a database externally, then place it in the assets folder of the project and then copy the entire database from there. This is much quicker if the database has a lot of tables and other components. Upgrades are triggered by changing the database version number in the res/values/strings.xml file. Upgrades would then be accomplished by creating a new database externally, replacing the old database in the assets folder with the new database, saving the old database in internal storage under another name, copying the new database from the assets folder into internal storage, transferring all of the data from the old database (that was renamed earlier) into the new database and finally deleting the old database. You can create a database originally by using the SQLite Manager FireFox plugin to execute your creation sql statements.

The other option is to create a database internally from a sql file. This is not as quick but the delay would probably be unnoticeable to the users if the database has only a few tables. Upgrades are triggered by changing the database version number in the res/values/strings.xml file. Upgrades would then be accomplished by processing an upgrade sql file. The data in the database will remain unchanged except when its container is removed, for example dropping a table.

The example below demonstrates how to use either method.

Here is a sample create_database.sql file. It is to be placed in the assets folder of the project for the internal method or copied into the "Execute SQL' of SQLite Manager to create the database for the external method. (NOTE: Notice the comment about the table required by Android.)

--Android requires a table named 'android_metadata' with a 'locale' column
CREATE TABLE "android_metadata" ("locale" TEXT DEFAULT 'en_US');
INSERT INTO "android_metadata" VALUES ('en_US');

CREATE TABLE "kitchen_table";
CREATE TABLE "coffee_table";
CREATE TABLE "pool_table";
CREATE TABLE "dining_room_table";
CREATE TABLE "card_table"; 

Here is a sample update_database.sql file. It is to be placed in the assets folder of the project for the internal method or copied into the "Execute SQL' of SQLite Manager to create the database for the external method. (NOTE: Notice that all three types of SQL comments will be ignored by the sql parser that is included in this example.)

--CREATE TABLE "kitchen_table";  This is one type of comment in sql.  It is ignored by parseSql.
/*
 * CREATE TABLE "coffee_table"; This is a second type of comment in sql.  It is ignored by parseSql.
 */
{
CREATE TABLE "pool_table";  This is a third type of comment in sql.  It is ignored by parseSql.
}
/* CREATE TABLE "dining_room_table"; This is a second type of comment in sql.  It is ignored by parseSql. */
{ CREATE TABLE "card_table"; This is a third type of comment in sql.  It is ignored by parseSql. }

--DROP TABLE "picnic_table"; Uncomment this if picnic table was previously created and now is being replaced.
CREATE TABLE "picnic_table" ("plates" TEXT);
INSERT INTO "picnic_table" VALUES ('paper');

Here is an entry to add to the /res/values/strings.xml file for the database version number.

<item type="string" name="databaseVersion" format="integer">1</item>

Here is an activity that accesses the database and then uses it. (Note: You might want to run the database code in a separate thread if it uses a lot of resources.)

package android.example;

import android.app.Activity;
import android.database.sqlite.SQLiteDatabase;
import android.os.Bundle;

/**
 * @author Danny Remington - MacroSolve
 * 
 *         Activity for demonstrating how to use a sqlite database.
 */
public class Database extends Activity {
     /** Called when the activity is first created. */
     @Override
    public void onCreate(Bundle savedInstanceState) {
        super.onCreate(savedInstanceState);
        setContentView(R.layout.main);
        DatabaseHelper myDbHelper;
        SQLiteDatabase myDb = null;

        myDbHelper = new DatabaseHelper(this);
        /*
         * Database must be initialized before it can be used. This will ensure
         * that the database exists and is the current version.
         */
         myDbHelper.initializeDataBase();

         try {
            // A reference to the database can be obtained after initialization.
            myDb = myDbHelper.getWritableDatabase();
            /*
             * Place code to use database here.
             */
         } catch (Exception ex) {
            ex.printStackTrace();
         } finally {
            try {
                myDbHelper.close();
            } catch (Exception ex) {
                ex.printStackTrace();
            } finally {
                myDb.close();
            }
        }

    }
}

Here is the database helper class where the database is created or updated if necessary. (NOTE: Android requires that you create a class that extends SQLiteOpenHelper in order to work with a Sqlite database.)

package android.example;

import java.io.FileOutputStream;
import java.io.IOException;
import java.io.InputStream;
import java.io.OutputStream;

import android.content.Context;
import android.database.sqlite.SQLiteDatabase;
import android.database.sqlite.SQLiteOpenHelper;

/**
 * @author Danny Remington - MacroSolve
 * 
 *         Helper class for sqlite database.
 */
public class DatabaseHelper extends SQLiteOpenHelper {

    /*
     * The Android's default system path of the application database in internal
     * storage. The package of the application is part of the path of the
     * directory.
     */
    private static String DB_DIR = "/data/data/android.example/databases/";
    private static String DB_NAME = "database.sqlite";
    private static String DB_PATH = DB_DIR + DB_NAME;
    private static String OLD_DB_PATH = DB_DIR + "old_" + DB_NAME;

    private final Context myContext;

    private boolean createDatabase = false;
    private boolean upgradeDatabase = false;

    /**
     * Constructor Takes and keeps a reference of the passed context in order to
     * access to the application assets and resources.
     * 
     * @param context
     */
    public DatabaseHelper(Context context) {
        super(context, DB_NAME, null, context.getResources().getInteger(
                R.string.databaseVersion));
        myContext = context;
        // Get the path of the database that is based on the context.
        DB_PATH = myContext.getDatabasePath(DB_NAME).getAbsolutePath();
    }

    /**
     * Upgrade the database in internal storage if it exists but is not current. 
     * Create a new empty database in internal storage if it does not exist.
     */
    public void initializeDataBase() {
        /*
         * Creates or updates the database in internal storage if it is needed
         * before opening the database. In all cases opening the database copies
         * the database in internal storage to the cache.
         */
        getWritableDatabase();

        if (createDatabase) {
            /*
             * If the database is created by the copy method, then the creation
             * code needs to go here. This method consists of copying the new
             * database from assets into internal storage and then caching it.
             */
            try {
                /*
                 * Write over the empty data that was created in internal
                 * storage with the one in assets and then cache it.
                 */
                copyDataBase();
            } catch (IOException e) {
                throw new Error("Error copying database");
            }
        } else if (upgradeDatabase) {
            /*
             * If the database is upgraded by the copy and reload method, then
             * the upgrade code needs to go here. This method consists of
             * renaming the old database in internal storage, create an empty
             * new database in internal storage, copying the database from
             * assets to the new database in internal storage, caching the new
             * database from internal storage, loading the data from the old
             * database into the new database in the cache and then deleting the
             * old database from internal storage.
             */
            try {
                FileHelper.copyFile(DB_PATH, OLD_DB_PATH);
                copyDataBase();
                SQLiteDatabase old_db = SQLiteDatabase.openDatabase(OLD_DB_PATH, null, SQLiteDatabase.OPEN_READWRITE);
                SQLiteDatabase new_db = SQLiteDatabase.openDatabase(DB_PATH,null, SQLiteDatabase.OPEN_READWRITE);
                /*
                 * Add code to load data into the new database from the old
                 * database and then delete the old database from internal
                 * storage after all data has been transferred.
                 */
            } catch (IOException e) {
                throw new Error("Error copying database");
            }
        }

    }

    /**
     * Copies your database from your local assets-folder to the just created
     * empty database in the system folder, from where it can be accessed and
     * handled. This is done by transfering bytestream.
     * */
    private void copyDataBase() throws IOException {
        /*
         * Close SQLiteOpenHelper so it will commit the created empty database
         * to internal storage.
         */
        close();

        /*
         * Open the database in the assets folder as the input stream.
         */
        InputStream myInput = myContext.getAssets().open(DB_NAME);

        /*
         * Open the empty db in interal storage as the output stream.
         */
        OutputStream myOutput = new FileOutputStream(DB_PATH);

        /*
         * Copy over the empty db in internal storage with the database in the
         * assets folder.
         */
        FileHelper.copyFile(myInput, myOutput);

        /*
         * Access the copied database so SQLiteHelper will cache it and mark it
         * as created.
         */
        getWritableDatabase().close();
    }

    /*
     * This is where the creation of tables and the initial population of the
     * tables should happen, if a database is being created from scratch instead
     * of being copied from the application package assets. Copying a database
     * from the application package assets to internal storage inside this
     * method will result in a corrupted database.
     * <P>
     * NOTE: This method is normally only called when a database has not already
     * been created. When the database has been copied, then this method is
     * called the first time a reference to the database is retrieved after the
     * database is copied since the database last cached by SQLiteOpenHelper is
     * different than the database in internal storage.
     */
    @Override
    public void onCreate(SQLiteDatabase db) {
        /*
         * Signal that a new database needs to be copied. The copy process must
         * be performed after the database in the cache has been closed causing
         * it to be committed to internal storage. Otherwise the database in
         * internal storage will not have the same creation timestamp as the one
         * in the cache causing the database in internal storage to be marked as
         * corrupted.
         */
        createDatabase = true;

        /*
         * This will create by reading a sql file and executing the commands in
         * it.
         */
            // try {
            // InputStream is = myContext.getResources().getAssets().open(
            // "create_database.sql");
            //
            // String[] statements = FileHelper.parseSqlFile(is);
            //
            // for (String statement : statements) {
            // db.execSQL(statement);
            // }
            // } catch (Exception ex) {
            // ex.printStackTrace();
            // }
    }

    /**
     * Called only if version number was changed and the database has already
     * been created. Copying a database from the application package assets to
     * the internal data system inside this method will result in a corrupted
     * database in the internal data system.
     */
    @Override
    public void onUpgrade(SQLiteDatabase db, int oldVersion, int newVersion) {
        /*
         * Signal that the database needs to be upgraded for the copy method of
         * creation. The copy process must be performed after the database has
         * been opened or the database will be corrupted.
         */
        upgradeDatabase = true;

        /*
         * Code to update the database via execution of sql statements goes
         * here.
         */

        /*
         * This will upgrade by reading a sql file and executing the commands in
         * it.
         */
        // try {
        // InputStream is = myContext.getResources().getAssets().open(
        // "upgrade_database.sql");
        //
        // String[] statements = FileHelper.parseSqlFile(is);
        //
        // for (String statement : statements) {
        // db.execSQL(statement);
        // }
        // } catch (Exception ex) {
        // ex.printStackTrace();
        // }
    }

    /**
     * Called everytime the database is opened by getReadableDatabase or
     * getWritableDatabase. This is called after onCreate or onUpgrade is
     * called.
     */
    @Override
    public void onOpen(SQLiteDatabase db) {
        super.onOpen(db);
    }

    /*
     * Add your public helper methods to access and get content from the
     * database. You could return cursors by doing
     * "return myDataBase.query(....)" so it'd be easy to you to create adapters
     * for your views.
     */

}

Here's the FileHelper class that contains methods for byte stream copying files and parsing sql files.

package android.example;

import java.io.BufferedReader;
import java.io.File;
import java.io.FileInputStream;
import java.io.FileOutputStream;
import java.io.FileReader;
import java.io.IOException;
import java.io.InputStream;
import java.io.InputStreamReader;
import java.io.OutputStream;
import java.io.Reader;
import java.nio.channels.FileChannel;

/**
 * @author Danny Remington - MacroSolve
 * 
 *         Helper class for common tasks using files.
 * 
 */
public class FileHelper {
    /**
     * Creates the specified <i><b>toFile</b></i> that is a byte for byte a copy
     * of <i><b>fromFile</b></i>. If <i><b>toFile</b></i> already existed, then
     * it will be replaced with a copy of <i><b>fromFile</b></i>. The name and
     * path of <i><b>toFile</b></i> will be that of <i><b>toFile</b></i>. Both
     * <i><b>fromFile</b></i> and <i><b>toFile</b></i> will be closed by this
     * operation.
     * 
     * @param fromFile
     *            - InputStream for the file to copy from.
     * @param toFile
     *            - InputStream for the file to copy to.
     */
    public static void copyFile(InputStream fromFile, OutputStream toFile) throws IOException {
        // transfer bytes from the inputfile to the outputfile
        byte[] buffer = new byte[1024];
        int length;

        try {
            while ((length = fromFile.read(buffer)) > 0) {
                toFile.write(buffer, 0, length);
            }
        }
        // Close the streams
        finally {
            try {
                if (toFile != null) {
                    try {
                        toFile.flush();
                    } finally {
                        toFile.close();
                    }
            }
            } finally {
                if (fromFile != null) {
                    fromFile.close();
                }
            }
        }
    }

    /**
     * Creates the specified <i><b>toFile</b></i> that is a byte for byte a copy
     * of <i><b>fromFile</b></i>. If <i><b>toFile</b></i> already existed, then
     * it will be replaced with a copy of <i><b>fromFile</b></i>. The name and
     * path of <i><b>toFile</b></i> will be that of <i><b>toFile</b></i>. Both
     * <i><b>fromFile</b></i> and <i><b>toFile</b></i> will be closed by this
     * operation.
     * 
     * @param fromFile
     *            - String specifying the path of the file to copy from.
     * @param toFile
     *            - String specifying the path of the file to copy to.
     */
    public static void copyFile(String fromFile, String toFile) throws IOException {
        copyFile(new FileInputStream(fromFile), new FileOutputStream(toFile));
    }

    /**
     * Creates the specified <i><b>toFile</b></i> that is a byte for byte a copy
     * of <i><b>fromFile</b></i>. If <i><b>toFile</b></i> already existed, then
     * it will be replaced with a copy of <i><b>fromFile</b></i>. The name and
     * path of <i><b>toFile</b></i> will be that of <i><b>toFile</b></i>. Both
     * <i><b>fromFile</b></i> and <i><b>toFile</b></i> will be closed by this
     * operation.
     * 
     * @param fromFile
     *            - File for the file to copy from.
     * @param toFile
     *            - File for the file to copy to.
     */
    public static void copyFile(File fromFile, File toFile) throws IOException {
        copyFile(new FileInputStream(fromFile), new FileOutputStream(toFile));
    }

    /**
     * Creates the specified <i><b>toFile</b></i> that is a byte for byte a copy
     * of <i><b>fromFile</b></i>. If <i><b>toFile</b></i> already existed, then
     * it will be replaced with a copy of <i><b>fromFile</b></i>. The name and
     * path of <i><b>toFile</b></i> will be that of <i><b>toFile</b></i>. Both
     * <i><b>fromFile</b></i> and <i><b>toFile</b></i> will be closed by this
     * operation.
     * 
     * @param fromFile
     *            - FileInputStream for the file to copy from.
     * @param toFile
     *            - FileInputStream for the file to copy to.
     */
    public static void copyFile(FileInputStream fromFile, FileOutputStream toFile) throws IOException {
        FileChannel fromChannel = fromFile.getChannel();
        FileChannel toChannel = toFile.getChannel();

        try {
            fromChannel.transferTo(0, fromChannel.size(), toChannel);
        } finally {
            try {
                if (fromChannel != null) {
                    fromChannel.close();
                }
            } finally {
                if (toChannel != null) {
                    toChannel.close();
                }
            }
        }
    }

    /**
     * Parses a file containing sql statements into a String array that contains
     * only the sql statements. Comments and white spaces in the file are not
     * parsed into the String array. Note the file must not contained malformed
     * comments and all sql statements must end with a semi-colon ";" in order
     * for the file to be parsed correctly. The sql statements in the String
     * array will not end with a semi-colon ";".
     * 
     * @param sqlFile
     *            - String containing the path for the file that contains sql
     *            statements.
     * 
     * @return String array containing the sql statements.
     */
    public static String[] parseSqlFile(String sqlFile) throws IOException {
        return parseSqlFile(new BufferedReader(new FileReader(sqlFile)));
    }

    /**
     * Parses a file containing sql statements into a String array that contains
     * only the sql statements. Comments and white spaces in the file are not
     * parsed into the String array. Note the file must not contained malformed
     * comments and all sql statements must end with a semi-colon ";" in order
     * for the file to be parsed correctly. The sql statements in the String
     * array will not end with a semi-colon ";".
     * 
     * @param sqlFile
     *            - InputStream for the file that contains sql statements.
     * 
     * @return String array containing the sql statements.
     */
    public static String[] parseSqlFile(InputStream sqlFile) throws IOException {
        return parseSqlFile(new BufferedReader(new InputStreamReader(sqlFile)));
    }

    /**
     * Parses a file containing sql statements into a String array that contains
     * only the sql statements. Comments and white spaces in the file are not
     * parsed into the String array. Note the file must not contained malformed
     * comments and all sql statements must end with a semi-colon ";" in order
     * for the file to be parsed correctly. The sql statements in the String
     * array will not end with a semi-colon ";".
     * 
     * @param sqlFile
     *            - Reader for the file that contains sql statements.
     * 
     * @return String array containing the sql statements.
     */
    public static String[] parseSqlFile(Reader sqlFile) throws IOException {
        return parseSqlFile(new BufferedReader(sqlFile));
    }

    /**
     * Parses a file containing sql statements into a String array that contains
     * only the sql statements. Comments and white spaces in the file are not
     * parsed into the String array. Note the file must not contained malformed
     * comments and all sql statements must end with a semi-colon ";" in order
     * for the file to be parsed correctly. The sql statements in the String
     * array will not end with a semi-colon ";".
     * 
     * @param sqlFile
     *            - BufferedReader for the file that contains sql statements.
     * 
     * @return String array containing the sql statements.
     */
    public static String[] parseSqlFile(BufferedReader sqlFile) throws IOException {
        String line;
        StringBuilder sql = new StringBuilder();
        String multiLineComment = null;

        while ((line = sqlFile.readLine()) != null) {
            line = line.trim();

            // Check for start of multi-line comment
            if (multiLineComment == null) {
                // Check for first multi-line comment type
                if (line.startsWith("/*")) {
                    if (!line.endsWith("}")) {
                        multiLineComment = "/*";
                    }
                // Check for second multi-line comment type
                } else if (line.startsWith("{")) {
                    if (!line.endsWith("}")) {
                        multiLineComment = "{";
                }
                // Append line if line is not empty or a single line comment
                } else if (!line.startsWith("--") && !line.equals("")) {
                    sql.append(line);
                } // Check for matching end comment
            } else if (multiLineComment.equals("/*")) {
                if (line.endsWith("*/")) {
                    multiLineComment = null;
                }
            // Check for matching end comment
            } else if (multiLineComment.equals("{")) {
                if (line.endsWith("}")) {
                    multiLineComment = null;
                }
            }

        }

        sqlFile.close();

        return sql.toString().split(";");
    }

}

Just my two cents. If you are using Bootstrap 3 then I would just add an extra style into your own site's stylesheet which controls the text-left style of the control-label.

If you were to add text-left to the label, by default there is another style which overrides this .form-horizontal .control-label. So if you add:

.form-horizontal .control-label.text-left{
    text-align: left;
}

Then the built in text-left style is applied to the label correctly.

b = a[a>threshold] this should do

I tested as follows:

import numpy as np, datetime
# array of zeros and ones interleaved
lrg = np.arange(2).reshape((2,-1)).repeat(1000000,-1).flatten()

t0 = datetime.datetime.now()
flt = lrg[lrg==0]
print datetime.datetime.now() - t0

t0 = datetime.datetime.now()
flt = np.array(filter(lambda x:x==0, lrg))
print datetime.datetime.now() - t0

I got

$ python test.py
0:00:00.028000
0:00:02.461000

http://docs.scipy.org/doc/numpy/user/basics.indexing.html#boolean-or-mask-index-arrays

Use RxCpp,

std::cout << "Waiting..." << std::endl;
auto values = rxcpp::observable<>::timer<>(std::chrono::seconds(1));
values.subscribe([](int v) {std::cout << "Called after 1s." << std::endl;});

Use break?

while(choice!=99)
{
  cin>>choice;
  if (choice==99)
    break;
  cin>>gNum;
}

You can also get an EntityManager using PersistenceContext or Autowired annotation, but be aware that it will not be thread-safe.

@PersistenceContext
private EntityManager entityManager;

Ideally, you don't use JSON documents for structured, regular data that you want to manipulate inside a relational database. Use a normalized relational design instead.

JSON is primarily intended to store whole documents that do not need to be manipulated inside the RDBMS. Related:

• JSONB with indexing vs. hstore

Updating a row in Postgres always writes a new version of the whole row. That's the basic principle of Postgres' MVCC model. From a performance perspective, it hardly matters whether you change a single piece of data inside a JSON object or all of it: a new version of the row has to be written.

Thus the advice in the manual:

JSON data is subject to the same concurrency-control considerations as any other data type when stored in a table. Although storing large documents is practicable, keep in mind that any update acquires a row-level lock on the whole row. Consider limiting JSON documents to a manageable size in order to decrease lock contention among updating transactions. Ideally, JSON documents should each represent an atomic datum that business rules dictate cannot reasonably be further subdivided into smaller datums that could be modified independently.

The gist of it: to modify anything inside a JSON object, you have to assign a modified object to the column. Postgres supplies limited means to build and manipulate json data in addition to its storage capabilities. The arsenal of tools has grown substantially with every new release since version 9.2. But the principal remains: You always have to assign a complete modified object to the column and Postgres always writes a new row version for any update.

Some techniques how to work with the tools of Postgres 9.3 or later:

• How do I modify fields inside the new PostgreSQL JSON datatype?

This answer has attracted about as many downvotes as all my other answers on SO together. People don't seem to like the idea: a normalized design is superior for non-dynamic data. This excellent blog post by Craig Ringer explains in more detail:

• "PostgreSQL anti-patterns: Unnecessary json/hstore dynamic columns"

My SQL teacher said that if you specify both a DEFAULT value and NOT NULLor NULL, DEFAULT should always be expressed before NOT NULL or NULL.

Like this:

ALTER TABLE tbl ADD COLUMN col VARCHAR(20) DEFAULT "MyDefault" NOT NULL

ALTER TABLE tbl ADD COLUMN col VARCHAR(20) DEFAULT "MyDefault" NULL

In Python 3, we can encode the string as UTF-8, then check whether the length stays the same. If so, then the original string is ASCII.

def isascii(s):
    """Check if the characters in string s are in ASCII, U+0-U+7F."""
    return len(s) == len(s.encode())

To check, pass the test string:

>>> isascii("?O???O??")
False
>>> isascii("Python")
True

Let's consider this scenario. You have App.jsx as the root file for you ReactJS SPA. In it your render() looks similar to this:

<Switch>
    <Route path="/comp" component={MyComponent} />
</Switch>

then, you should be able to use this.props.history inside MyComponent without a problem. Let's say you are rendering MySecondComponent inside MyComponent, in that case you need to call it in such manner:

<MySecondComponent {...props} />

which will pass the props from MyComponent down to MySecondComponent, thus making this.props.history available in MySecondComponent

SQLite can use text, real, or integer data types to store dates. Even more, whenever you perform a query, the results are shown using format %Y-%m-%d %H:%M:%S.

Now, if you insert/update date/time values using SQLite date/time functions, you can actually store milliseconds as well. If that's the case, the results are shown using format %Y-%m-%d %H:%M:%f. For example:

sqlite> create table test_table(col1 text, col2 real, col3 integer);
sqlite> insert into test_table values (
            strftime('%Y-%m-%d %H:%M:%f', '2014-03-01 13:01:01.123'),
            strftime('%Y-%m-%d %H:%M:%f', '2014-03-01 13:01:01.123'),
            strftime('%Y-%m-%d %H:%M:%f', '2014-03-01 13:01:01.123')
        );
sqlite> insert into test_table values (
            strftime('%Y-%m-%d %H:%M:%f', '2014-03-01 13:01:01.126'),
            strftime('%Y-%m-%d %H:%M:%f', '2014-03-01 13:01:01.126'),
            strftime('%Y-%m-%d %H:%M:%f', '2014-03-01 13:01:01.126')
        );
sqlite> select * from test_table;
2014-03-01 13:01:01.123|2014-03-01 13:01:01.123|2014-03-01 13:01:01.123
2014-03-01 13:01:01.126|2014-03-01 13:01:01.126|2014-03-01 13:01:01.126

Now, doing some queries to verify if we are actually able to compare times:

sqlite> select * from test_table /* using col1 */
           where col1 between 
               strftime('%Y-%m-%d %H:%M:%f', '2014-03-01 13:01:01.121') and
               strftime('%Y-%m-%d %H:%M:%f', '2014-03-01 13:01:01.125');
2014-03-01 13:01:01.123|2014-03-01 13:01:01.123|2014-03-01 13:01:01.123

You can check the same SELECT using col2 and col3 and you will get the same results. As you can see, the second row (126 milliseconds) is not returned.

Note that BETWEEN is inclusive, therefore...

sqlite> select * from test_table 
            where col1 between 
                 /* Note that we are using 123 milliseconds down _here_ */
                strftime('%Y-%m-%d %H:%M:%f', '2014-03-01 13:01:01.123') and
                strftime('%Y-%m-%d %H:%M:%f', '2014-03-01 13:01:01.125');

... will return the same set.

Try playing around with different date/time ranges and everything will behave as expected.

What about without strftime function?

sqlite> select * from test_table /* using col1 */
           where col1 between 
               '2014-03-01 13:01:01.121' and
               '2014-03-01 13:01:01.125';
2014-03-01 13:01:01.123|2014-03-01 13:01:01.123|2014-03-01 13:01:01.123

What about without strftime function and no milliseconds?

sqlite> select * from test_table /* using col1 */
           where col1 between 
               '2014-03-01 13:01:01' and
               '2014-03-01 13:01:02';
2014-03-01 13:01:01.123|2014-03-01 13:01:01.123|2014-03-01 13:01:01.123
2014-03-01 13:01:01.126|2014-03-01 13:01:01.126|2014-03-01 13:01:01.126

What about ORDER BY?

sqlite> select * from test_table order by 1 desc;
2014-03-01 13:01:01.126|2014-03-01 13:01:01.126|2014-03-01 13:01:01.126
2014-03-01 13:01:01.123|2014-03-01 13:01:01.123|2014-03-01 13:01:01.123
sqlite> select * from test_table order by 1 asc;
2014-03-01 13:01:01.123|2014-03-01 13:01:01.123|2014-03-01 13:01:01.123
2014-03-01 13:01:01.126|2014-03-01 13:01:01.126|2014-03-01 13:01:01.126

Works just fine.

Finally, when dealing with actual operations within a program (without using the sqlite executable...)

BTW: I'm using JDBC (not sure about other languages)... the sqlite-jdbc driver v3.7.2 from xerial - maybe newer revisions change the behavior explained below... If you are developing in Android, you don't need a jdbc-driver. All SQL operations can be submitted using the SQLiteOpenHelper.

JDBC has different methods to get actual date/time values from a database: java.sql.Date, java.sql.Time, and java.sql.Timestamp.

The related methods in java.sql.ResultSet are (obviously) getDate(..), getTime(..), and getTimestamp() respectively.

For example:

Statement stmt = ... // Get statement from connection
ResultSet rs = stmt.executeQuery("SELECT * FROM TEST_TABLE");
while (rs.next()) {
    System.out.println("COL1 : "+rs.getDate("COL1"));
    System.out.println("COL1 : "+rs.getTime("COL1"));
    System.out.println("COL1 : "+rs.getTimestamp("COL1"));
    System.out.println("COL2 : "+rs.getDate("COL2"));
    System.out.println("COL2 : "+rs.getTime("COL2"));
    System.out.println("COL2 : "+rs.getTimestamp("COL2"));
    System.out.println("COL3 : "+rs.getDate("COL3"));
    System.out.println("COL3 : "+rs.getTime("COL3"));
    System.out.println("COL3 : "+rs.getTimestamp("COL3"));
}
// close rs and stmt.

Since SQLite doesn't have an actual DATE/TIME/TIMESTAMP data type all these 3 methods return values as if the objects were initialized with 0:

new java.sql.Date(0)
new java.sql.Time(0)
new java.sql.Timestamp(0)

So, the question is: how can we actually select, insert, or update Date/Time/Timestamp objects? There's no easy answer. You can try different combinations, but they will force you to embed SQLite functions in all the SQL statements. It's far easier to define an utility class to transform text to Date objects inside your Java program. But always remember that SQLite transforms any date value to UTC+0000.

In summary, despite the general rule to always use the correct data type, or, even integers denoting Unix time (milliseconds since epoch), I find much easier using the default SQLite format ('%Y-%m-%d %H:%M:%f' or in Java 'yyyy-MM-dd HH:mm:ss.SSS') rather to complicate all your SQL statements with SQLite functions. The former approach is much easier to maintain.

TODO: I will check the results when using getDate/getTime/getTimestamp inside Android (API15 or better)... maybe the internal driver is different from sqlite-jdbc...

# cat .bash_profile | grep PATH
PATH=$HOME/bin:/usr/local/bin:/usr/local/sbin:/usr/bin:/usr/sbin:/bin:/sbin
export PATH

# cat /etc/sudoers | grep Defaults
Defaults    requiretty
Defaults    env_reset
Defaults    env_keep = "SOME_PARAM1 SOME_PARAM2 ... PATH"

Actually you can use x64 and Python 2.7. This is just not delivered in the standard OpenCV installer. If you build the libraries from the source (http://docs.opencv.org/trunk/doc/tutorials/introduction/windows_install/windows_install.html) or you use the opencv-python from cgohlke's comment, it works just fine.

This is how you call an instance method on the Controller:

@{
  ((HomeController)this.ViewContext.Controller).Method1();
}

This is how you call a static method in any class

@{
    SomeClass.Method();
}

This will work assuming the method is public and visible to the view.

Related to how to link to the README.md of a GitHub repository to a specific line number of code

You have three cases:

1. We can link to (custom commit)

   But Link will ALWAYS link to old file version, which will NOT contains new updates in the master branch for example. Example:

   https://github.com/username/projectname/blob/b8d94367354011a0470f1b73c8f135f095e28dd4/file.txt#L10
   

2. We can link to (custom branch) like (master-branch). But the link will ALWAYS link to the latest file version which will contain new updates. Due to new updates, the link may point to an invalid business line number. Example:

   https://github.com/username/projectname/blob/master/file.txt#L10
   

3. GitHub can NOT make AUTO-link to any file either to (custom commit) nor (master-branch) Because of following business issues:

   • line business meaning, to link to it in the new file
   • length of target highlighted code which can be changed

You need a multi-dimensional array, you can try the following:

$params = array(
   array(
      "id" => 100,
      "name" => "John",
   ),
   "Barrel of Oil",
   500
);

in PHP an array is a structure and is very flexible. Normally with soap calls I use an XML wrapper so unsure if it will work.

EDIT:

What you may want to try is creating a json query to send or using that to create a xml buy sort of following what is on this page: http://onwebdev.blogspot.com/2011/08/php-converting-rss-to-json.html

$sn = 0;//increment the serial number, then add the sn to job
for($x = 0; $x<20; $x++)
{
$sn++;
$added_date = "10/10/10";
$job_title = "new job";
$salary = $sn*1000;
$cd = "27/10/2017";//the closing date
$ins = "some institution";//the institution for the vacancy 
$notes = "some notes here";//any notes about the jobs

$sn_div = "<div class='sn_div'>".$sn."</div>";
$ad_div = "<div class='ad_div'>".$added_date."</div>";
$job_div = "<div class='job_div'>".$job_title."</div>";
$salary_div = "<div class='salary_div'>".$salary."</div>";
$cd_div = "<div class='cd_div'>".$cd."</div>";//cd means closing date
$ins_div = "<div class='ins_div'>".$ins."</div>";//ins means institution
$notes_div = "<div class='notes_div'>".$notes."</div>";


/*erroneous line*/$job_no = "job"+$sn;//to create the job rows
$$job_no = "<div class='job_wrapper'>".$sn_div.$ad_div.$job_div.$salary_div.$cd_div.$ins_div.$notes_div."</div>";

echo $$job_no;//and then echo each job

}

that's the code I had which looped and created new html div elements. The code worked fine and the elements were formed, but i got the same warning in the error_log.

After reading the useful other answers, I figured that I was summing up a string and a number in the erroneous line. So I changed the code at that line to

/*erroneous line*/$job_no = "job"&&$sn;//this is the new variable that will create the job rows

Now the code works as earlier but with no warnings this time. Hope this example would be useful to someone.

If you're streaming a file that you're generating dynamically, and also have a realtime server-to-client messaging library implemented, you can alert your client pretty easily.

The server-to-client messaging library I like and recommend is Socket.io (via Node.js). After your server script is done generating the file that is being streamed for download your last line in that script can emit a message to Socket.io which sends a notification to the client. On the client, Socket.io listens for incoming messages emitted from the server and allows you to act on them. The benefit of using this method over others is that you are able to detect a "true" finish event after the streaming is done.

For example, you could show your busy indicator after a download link is clicked, stream your file, emit a message to Socket.io from the server in the last line of your streaming script, listen on the client for a notification, receive the notification and update your UI by hiding the busy indicator.

I realize most people reading answers to this question might not have this type of a setup, but I've used this exact solution to great effect in my own projects and it works wonderfully.

Socket.io is incredibly easy to install and use. See more: http://socket.io/

For fpdf to work properly, there cannot be any output at all beside what fpdf generates. For example, this will work:

<?php
$pdf = new FPDF();
$pdf->AddPage();
$pdf->SetFont('Arial','B',16);
$pdf->Cell(40,10,'Hello World!');
$pdf->Output();
?>

While this will not (note the leading space before the opening <? tag)

 <?php
$pdf = new FPDF();
$pdf->AddPage();
$pdf->SetFont('Arial','B',16);
$pdf->Cell(40,10,'Hello World!');
$pdf->Output();
?>

Also, this will not work either (the echo will break it):

<?php
echo "About to create pdf";
$pdf = new FPDF();
$pdf->AddPage();
$pdf->SetFont('Arial','B',16);
$pdf->Cell(40,10,'Hello World!');
$pdf->Output();
?>

I'm not sure about the drupal side of things, but I know that absolutely zero non-fpdf output is a requirement for fpdf to work.

add ob_start (); at the top and at the end add ob_end_flush();

<?php
    ob_start();
    require('fpdf.php');
    $pdf = new FPDF();
    $pdf->AddPage();
    $pdf->SetFont('Arial','B',16);
    $pdf->Cell(40,10,'Hello World!');
    $pdf->Output();
    ob_end_flush(); 
?>

give me an error as below:
FPDF error: Some data has already been output, can't send PDF

to over come this error: go to fpdf.php in that,goto line number 996

function Output($name='', $dest='')

after that make changes like this:

function Output($name='', $dest='') {   
    ob_clean();     //Output PDF to so

Hi do you have a session header on the top of your page. or any includes If you have then try to add this codes on top pf your page it should works fine.

<?

while (ob_get_level())
ob_end_clean();
header("Content-Encoding: None", true);

?>

cheers :-)

In my case i had set:

ini_set('display_errors', 'on');
error_reporting(E_ALL | E_STRICT);

When i made the request to generate the report, some warnings were displayed in the browser (like the usage of deprecated functions).
Turning off the display_errors option, the report was generated successfully.

I use this:

import sqlite3

    db = sqlite3.connect('~/foo.sqlite')
    dbc = db.cursor()
    dbc.execute("PRAGMA table_info('bar')"
    ciao = dbc.fetchall()

    HeaderList=[]
    for i in ciao:
        counter=0
        for a in i:
            counter+=1
            if( counter==2):
                HeaderList.append(a)

print(HeaderList)

I used AndExplorer for this purpose and my solution is popup a dialog and then redirect on the market to install the misssing application:

My startCreation is trying to call external file/directory picker. If it is missing call show installResultMessage function.

private void startCreation(){
    Intent intent = new Intent();
    intent.setAction(Intent.ACTION_PICK);
    Uri startDir = Uri.fromFile(new File("/sdcard"));

    intent.setDataAndType(startDir,
            "vnd.android.cursor.dir/lysesoft.andexplorer.file");
    intent.putExtra("browser_filter_extension_whitelist", "*.csv");
    intent.putExtra("explorer_title", getText(R.string.andex_file_selection_title));
    intent.putExtra("browser_title_background_color",
            getText(R.string.browser_title_background_color));
    intent.putExtra("browser_title_foreground_color",
            getText(R.string.browser_title_foreground_color));
    intent.putExtra("browser_list_background_color",
            getText(R.string.browser_list_background_color));
    intent.putExtra("browser_list_fontscale", "120%");
    intent.putExtra("browser_list_layout", "2");

    try{
         ApplicationInfo info = getPackageManager()
                                 .getApplicationInfo("lysesoft.andexplorer", 0 );

            startActivityForResult(intent, PICK_REQUEST_CODE);
    } catch( PackageManager.NameNotFoundException e ){
        showInstallResultMessage(R.string.error_install_andexplorer);
    } catch (Exception e) {
        Log.w(TAG, e.getMessage());
    }
}

This methos is just pick up a dialog and if user wants install the external application from market

private void showInstallResultMessage(int msg_id) {
    AlertDialog dialog = new AlertDialog.Builder(this).create();
    dialog.setMessage(getText(msg_id));
    dialog.setButton(getText(R.string.button_ok),
            new DialogInterface.OnClickListener() {

                @Override
                public void onClick(DialogInterface dialog, int which) {
                    finish();
                }
            });
    dialog.setButton2(getText(R.string.button_install),
            new DialogInterface.OnClickListener() {

                @Override
                public void onClick(DialogInterface dialog, int which) {
                    Intent intent = new Intent(Intent.ACTION_VIEW);
                    intent.setData(Uri.parse("market://details?id=lysesoft.andexplorer"));
                    startActivity(intent);
                    finish();
                }
            });
    dialog.show();
}

The solution from Edward worked for me.

If you want the whole tablix on one sheet with a constant name, specify the PageName in the tablix's Properties. If you set the PageName in the tablix's Properties, you can not use data from the tablix's dataset in your expression.

If you want rows from the tablix grouped into sheets (or you want one sheet with a name based on the data), specify the PageName in the Group Header.

At my last job I went a little deeper in the enum version:

public enum Messages {
    @Error
    @Text("You can''t put a {0} in a {1}")
    XYZ00001_CONTAINMENT_NOT_ALLOWED,
    ...
}

@Error, @Info, @Warning are retained in the class file and are available at runtime. (We had a couple of other annotations to help describe message delivery as well)

@Text is a compile-time annotation.

I wrote an annotation processor for this that did the following:

• Verify that there are no duplicate message numbers (the part before the first underscore)
• Syntax-check the message text
• Generate a messages.properties file that contains the text, keyed by the enum value.

I wrote a few utility routines that helped log errors, wrap them as exceptions (if desired) and so forth.

I'm trying to get them to let me open-source it... -- Scott

Unfortunately there really isn't a set set of escape codes since it varies based on the language you are using.

However, keeping a page like the Regular Expression Tools Page or this Regular Expression Cheatsheet can go a long way to help you quickly filter things out.

This technique translates java.util.Date to UTC format (or any other) and back again.

Define a class like so:

import java.util.Date;

import org.joda.time.DateTime;
import org.joda.time.format.DateTimeFormat;
import org.joda.time.format.DateTimeFormatter;

public class UtcUtility {

public static DateTimeFormatter UTC = DateTimeFormat.forPattern("yyyy-MM-dd'T'HH:mm:ss.SSS'Z'").withZoneUTC();


public static Date parse(DateTimeFormatter dateTimeFormatter, String date) {
    return dateTimeFormatter.parseDateTime(date).toDate();
}

public static String format(DateTimeFormatter dateTimeFormatter, Date date) {
    return format(dateTimeFormatter, date.getTime());
}

private static String format(DateTimeFormatter dateTimeFormatter, long timeInMillis) {
    DateTime dateTime = new DateTime(timeInMillis);
    String formattedString = dateTimeFormatter.print(dateTime);
    return formattedString;
}

}

Then use it like this:

Date date = format(UTC, "2020-04-19T00:30:07.000Z")

or

String date = parse(UTC, new Date())

You can also define other date formats if you require (not just UTC)

Add this to the stylesheet:

table {
  border-collapse: collapse;
}

JSFiddle.

The reason why it behaves this way is actually described pretty well in the specification:

There are two distinct models for setting borders on table cells in CSS. One is most suitable for so-called separated borders around individual cells, the other is suitable for borders that are continuous from one end of the table to the other.

... and later, for collapse setting:

In the collapsing border model, it is possible to specify borders that surround all or part of a cell, row, row group, column, and column group.

You can use the following flags --single-branch && --depth to download the specific branch and to limit the amount of history which will be downloaded.

You will clone the repo from a certain point in time and only for the given branch

git clone -b <branch> --single-branch <url> --depth <number of commits>

--[no-]single-branch

---

Clone only the history leading to the tip of a single branch, either specified by the --branch option or the primary branch remote’s HEAD points at.

Further fetches into the resulting repository will only update the remote-tracking branch for the branch this option was used for the initial cloning. If the HEAD at the remote did not point at any branch when --single-branch clone was made, no remote-tracking branch is created.

--depth

Create a shallow clone with a history truncated to the specified number of commits

Another way of monitoring a child-process is to create a worker thread that will :

1. call CreateProcess()
2. call WaitForSingleObject() // the worker thread will now wait till the child-process finishes execution. it's possible to grab the return code (from the main() function) too.

Try this, it will insert the list item at index 0;

DropDownList1.Items.Insert(0, new ListItem("Add New", ""));

which(df==my.val, arr.ind=TRUE)

You said that every time you run the pip install you get Requirement already satisfied (use --upgrade to upgrade): virtualenv in /Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/site-packages. What you need to do is the following:

1. Change Directory (go to to the one where the virtualenv.py) cd /Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/site-packages
2. If you do an ls you will see that the script is there virtualenv.py
3. Run the script like this: python virtualenv.py --distribute /the/path/at/which/you/want/the/new/venv/at theNameOfTheNewVirtualEnv

Hope this helps. My advice would be to research venvs more. Here is a good resource: https://www.dabapps.com/blog/introduction-to-pip-and-virtualenv-python/

html

<h2 class="example example2">A heading with class="example"</h2>

javascritp code

var element = document.querySelectorAll(".example.example2");
element.style.backgroundColor = "green";

The querySelectorAll() method returns all elements in the document that matches a specified CSS selector(s), as a static NodeList object.

The NodeList object represents a collection of nodes. The nodes can be accessed by index numbers. The index starts at 0.

also learn more about https://www.w3schools.com/jsref/met_document_queryselectorall.asp

== Thank You ==

In Typescript use the For Each like below.

selectChildren(data, $event) {
let parentChecked = data.checked;
for(var obj in this.hierarchicalData)
    {
        for (var childObj in obj )
        {
            value.checked = parentChecked;
        }
    }
}

A funny way to remove all spaces from a variable is to use printf:

$ myvar='a cool variable    with   lots of   spaces in it'
$ printf -v myvar '%s' $myvar
$ echo "$myvar"
acoolvariablewithlotsofspacesinit

It turns out it's slightly more efficient than myvar="${myvar// /}", but not safe regarding globs (*) that can appear in the string. So don't use it in production code.

If you really really want to use this method and are really worried about the globbing thing (and you really should), you can use set -f (which disables globbing altogether):

$ ls
file1  file2
$ myvar='  a cool variable with spaces  and  oh! no! there is  a  glob  *  in it'
$ echo "$myvar"
  a cool variable with spaces  and  oh! no! there is  a  glob  *  in it
$ printf '%s' $myvar ; echo
acoolvariablewithspacesandoh!no!thereisaglobfile1file2init
$ # See the trouble? Let's fix it with set -f:
$ set -f
$ printf '%s' $myvar ; echo
acoolvariablewithspacesandoh!no!thereisaglob*init
$ # Since we like globbing, we unset the f option:
$ set +f

I posted this answer just because it's funny, not to use it in practice.

If you are using the updated Microsoft.Web.RedisSessionStateProvider(starting from 3.0.2) you can add this to your web.config to allow concurrent sessions.

<appSettings>
    <add key="aspnet:AllowConcurrentRequestsPerSession" value="true"/>
</appSettings>

Source

The config file is just an XML file, you can open it by:

private static XmlDocument loadConfigDocument()
{
    XmlDocument doc = null;
    try
    {
        doc = new XmlDocument();
        doc.Load(getConfigFilePath());
        return doc;
    }
    catch (System.IO.FileNotFoundException e)
    {
        throw new Exception("No configuration file found.", e);
    }
    catch (Exception ex)
    {
        return null;
    }
}

and later retrieving values by:

    // retrieve appSettings node

    XmlNode node =  doc.SelectSingleNode("//appSettings");

These are the prerequisites of directly using the script name:

1. Add the shebang line (#!/bin/bash) at the very top.
2. Use chmod u+x scriptname to make the script executable (where scriptname is the name of your script).
3. Place the script under /usr/local/bin folder.
   • Note: I suggest placing it under /usr/local/bin because most likely that path will be already added to your PATH variable.
4. Run the script using just its name, scriptname.

If you don't have access to /usr/local/bin then do the following:

1. Create a folder in your home directory and call it bin.

2. Do ls -lA on your home directory, to identify the start-up script your shell is using. It should be either .profile or .bashrc.

3. Once you have identified the start up script, add the following line:

   PATH="$PATH:$HOME/bin"
   

4. Once added, source your start-up script or log out and log back in.

   To source, put . followed by a space and then your start-up script name, e.g. . .profile or . .bashrc

5. Run the script using just its name, scriptname.

You can also open a required file through a prompt, This helps when you want to select file from different path and different file.

Sub openwb()
Dim wkbk As Workbook
Dim NewFile As Variant

NewFile = Application.GetOpenFilename("microsoft excel files (*.xlsm*), *.xlsm*")

If NewFile <> False Then
Set wkbk = Workbooks.Open(NewFile)
End If
End Sub

No need for css, you can just use the HR tag from HTML

<hr />

Most of all has posted correct answer. I would like to add few links, so that you can refer to them and have clear and better ideas about the same:

UserControl: http://msdn.microsoft.com/en-IN/library/a6h7e207(v=vs.71).aspx

The difference between page and window with respect to WPF: Page vs Window in WPF?

It is now 2019 and there are better options. Namely, xxhash.

~ echo test | xxhsum                                                           
2d7f1808da1fa63c  stdin

Use the in keyword.

if 'apples' in d:
    if d['apples'] == 20:
        print('20 apples')
    else:
        print('Not 20 apples')

If you want to get the value only if the key exists (and avoid an exception trying to get it if it doesn't), then you can use the get function from a dictionary, passing an optional default value as the second argument (if you don't pass it it returns None instead):

if d.get('apples', 0) == 20:
    print('20 apples.')
else:
    print('Not 20 apples.')

When changing icon size with UIEdgeInsetsMake(top, left, bottom, right), keep in mind button dimensions and the ability of UIEdgeInsetsMake to work with negative values as if they are positive.

Example: Two buttons with height 100 and aspect 1:1.

left.imageEdgeInsets = UIEdgeInsetsMake(40, 0, 40, 0)
right.imageEdgeInsets = UIEdgeInsetsMake(40, 0, 40, 0)

left.imageEdgeInsets = UIEdgeInsetsMake(40, 0, 40, 0)
right.imageEdgeInsets = UIEdgeInsetsMake(45, 0, 45, 0)

left.imageEdgeInsets = UIEdgeInsetsMake(40, 0, 40, 0)
right.imageEdgeInsets = UIEdgeInsetsMake(60, 0, 60, 0)

Examples 1 and 3 are identical since ABS(100 - (40 + 40)) = ABS(100 - (60 + 60))

I realise that there are many answers, but I found a solution that may be helpful to some. I ran into the same problem, I am running oracle sql develop on my local computer and I have a bunch of users. I happen to remember the password for one of my users and I used it to reset the password of other users.

Steps:

1. connect to a database using a valid user and password, in my case all my users expired except "system" and I remember that password

2. find the "Other_users" node within the tree as the image below displays

3.within the "Other_users" tree find your users that you would like to reset password of and right click the note and select "Edit Users"

4.fill out the new password in edit user dialog and click "Apply". Make sure that you have unchecked "Password expired (user must change next login)".

And that worked for me, It is not as good as other solution because you need to be able to login to at least one account but it does work.

Anacoda3-4.2.0 Uses python 3.5 You can find the same in the link given below : https://repo.continuum.io/archive/Anaconda3-4.2.0-Windows-x86_64.exe

I faced the same problem and found the correct version by checking the available Anaconda 4.2.0 distributions in installer archive here

See this article: http://www.unilogica.com/mysql-innodb-recovery/ (It's in portuguese)

Are explained how to use innodb_force_recovery and innodb_file_per_table. I discovered this after need to recovery a crashed database with a single ibdata1.

Using innodb_file_per_table, all tables in InnoDB will create a separated table file, like MyISAM.

If you don't want to specify a repository you can add the following lines to the package.json file:

"description":"",
"version":"0.0.1",
"private":true,

That worked for me.
By adding private, you don't need to link to a repo.

nchar(10) is a fixed-length Unicode string of length 10. nvarchar(10) is a variable-length Unicode string with a maximum length of 10. Typically, you would use the former if all data values are 10 characters and the latter if the lengths vary.

You can return a List instead of an array and things gets much simpler.

    public static List<File> listf(String directoryName) {
        File directory = new File(directoryName);

        List<File> resultList = new ArrayList<File>();

        // get all the files from a directory
        File[] fList = directory.listFiles();
        resultList.addAll(Arrays.asList(fList));
        for (File file : fList) {
            if (file.isFile()) {
                System.out.println(file.getAbsolutePath());
            } else if (file.isDirectory()) {
                resultList.addAll(listf(file.getAbsolutePath()));
            }
        }
        //System.out.println(fList);
        return resultList;
    } 

Sometimes the crash itself isn't the real cause of the problem-- perhaps the memory got smashed at an earlier point but it took a while for the corruption to show itself. Check out valgrind, which has lots of checks for pointer problems (including array bounds checking). It'll tell you where the problem starts, not just the line where the crash occurs.

Let me answer this question:
First of all, using annotations as our configure method is just a convenient method instead of coping the endless XML configuration file.

The @Idannotation is inherited from javax.persistence.Id, indicating the member field below is the primary key of current entity. Hence your Hibernate and spring framework as well as you can do some reflect works based on this annotation. for details please check javadoc for Id

The @GeneratedValue annotation is to configure the way of increment of the specified column(field). For example when using Mysql, you may specify auto_increment in the definition of table to make it self-incremental, and then use

@GeneratedValue(strategy = GenerationType.IDENTITY)

in the Java code to denote that you also acknowledged to use this database server side strategy. Also, you may change the value in this annotation to fit different requirements.

1. Define Sequence in database

For instance, Oracle has to use sequence as increment method, say we create a sequence in Oracle:

create sequence oracle_seq;

2. Refer the database sequence

Now that we have the sequence in database, but we need to establish the relation between Java and DB, by using @SequenceGenerator:

@SequenceGenerator(name="seq",sequenceName="oracle_seq")

sequenceName is the real name of a sequence in Oracle, name is what you want to call it in Java. You need to specify sequenceName if it is different from name, otherwise just use name. I usually ignore sequenceName to save my time.

3. Use sequence in Java

Finally, it is time to make use this sequence in Java. Just add @GeneratedValue:

@GeneratedValue(strategy=GenerationType.SEQUENCE, generator="seq")

The generator field refers to which sequence generator you want to use. Notice it is not the real sequence name in DB, but the name you specified in name field of SequenceGenerator.

4. Complete

So the complete version should be like this:

public class MyTable
{
    @Id
    @SequenceGenerator(name="seq",sequenceName="oracle_seq")        
    @GeneratedValue(strategy=GenerationType.SEQUENCE, generator="seq")               
    private Integer pid;
}

Now start using these annotations to make your JavaWeb development easier.

According to the documentation:

When should I use an attribute versus an element? Use an element when you are creating a component that is in control of the template. The common case for this is when you are creating a Domain-Specific Language for parts of your template. Use an attribute when you are decorating an existing element with new functionality.

Edit following comment on pitfalls for a complete answer:

Assuming you're building an app that should run on Internet Explorer <= 8, whom support has been dropped by AngularJS team from AngularJS 1.3, you have to follow the following instructions in order to make it working: https://docs.angularjs.org/guide/ie

In Windows you can use a Powershell Script with CompareObject

compare-object -IncludeEqual -ExcludeDifferent -PassThru (get-content A.txt) (get-content B.txt)> MATCHING.txt | Out-Null #Find Matching Lines

CompareObject:

• IncludeEqual without -ExcludeDifferent : Everything
• ExcludeDifferent without -InclueEqual : Nothing

For Python3

Step 1: Install Dependencies

sudo apt-get install python3 python-dev python3-dev

Step 2: Install

pip install psycopg2

if you are using rabbitMQ, use this in terminal:

sudo rabbitmqctl list_queues

it will print list of queues with number of pending tasks. for example:

Listing queues ...
0b27d8c59fba4974893ec22d478a7093    0
0e0a2da9828a48bc86fe993b210d984f    0
[email protected] 0
11926b79e30a4f0a9d95df61b6f402f7    0
15c036ad25884b82839495fb29bd6395    1
[email protected]    0
celery  166
celeryev.795ec5bb-a919-46a8-80c6-5d91d2fcf2aa   0
celeryev.faa4da32-a225-4f6c-be3b-d8814856d1b6   0

the number in right column is number of tasks in the queue. in above, celery queue has 166 pending task.

I had to use this kind of code for a scanner that pasted stuff into the field

$(document).ready(function() {
  var tId,oldVal;
  $("#fieldId").focus(function() {
     oldVal = $("#fieldId").val();
     tId=setInterval(function() { 
      var newVal = $("#fieldId").val(); 
      if (oldVal!=newVal) oldVal=newVal;
      someaction() },100);
  });
  $("#fieldId").blur(function(){ clearInterval(tId)});
});

Not tested...

You can try this:

You must follow the following format

    $('element,id,class').on('click', function(){....});

*JQuery code*

    $('body').addClass('.anything').on('click', function(){
      //do some code here i.e
      alert("ok");
    });

You need a click listener which calls addActivityItem if less than 2 options exist:

var activities = document.getElementById("activitySelector");

activities.addEventListener("click", function() {
    var options = activities.querySelectorAll("option");
    var count = options.length;
    if(typeof(count) === "undefined" || count < 2)
    {
        addActivityItem();
    }
});

activities.addEventListener("change", function() {
    if(activities.value == "addNew")
    {
        addActivityItem();
    }
});

function addActivityItem() {
    // ... Code to add item here
}

A live demo is here on JSfiddle.

(Tested for pandas 1.0.5)
Based on @athlonshi answer (it had ValueError: could not convert string to float: 'big', on C column), full working example without warning:

import pandas as pd
from sklearn.preprocessing import MinMaxScaler
scale = preprocessing.MinMaxScaler()

df = pd.DataFrame({
           'A':[14.00,90.20,90.95,96.27,91.21],
           'B':[103.02,107.26,110.35,114.23,114.68], 
           'C':['big','small','big','small','small']
         })
print(df)
df[["A","B"]] = pd.DataFrame(scale.fit_transform(df[["A","B"]].values), columns=["A","B"], index=df.index)
print(df)

       A       B      C
0  14.00  103.02    big
1  90.20  107.26  small
2  90.95  110.35    big
3  96.27  114.23  small
4  91.21  114.68  small
          A         B      C
0  0.000000  0.000000    big
1  0.926219  0.363636  small
2  0.935335  0.628645    big
3  1.000000  0.961407  small
4  0.938495  1.000000  small

There is an interesting alternative to the proposed solutions, that works with a single Dockerfile, require only a single call to docker build per conditional build and avoids bash.

Solution:

The following Dockerfile solves that problem. Copy-paste it and try it yourself.

ARG my_arg

FROM centos:7 AS base
RUN echo "do stuff with the centos image"

FROM base AS branch-version-1
RUN echo "this is the stage that sets VAR=TRUE"
ENV VAR=TRUE

FROM base AS branch-version-2
RUN echo "this is the stage that sets VAR=FALSE"
ENV VAR=FALSE

FROM branch-version-${my_arg} AS final
RUN echo "VAR is equal to ${VAR}"

Explanation of Dockerfile:

We first get a base image (centos:7 in your case) and put it into its own stage. The base stage should contain things that you want to do before the condition. After that, we have two more stages, representing the branches of our condition: branch-version-1 and branch-version-2. We build both of them. The final stage than chooses one of these stages, based on my_arg. Conditional Dockerfile. There you go.

Output when running:

(I abbreviated this a little...)

my_arg==2

docker build --build-arg my_arg=2 .
Step 1/12 : ARG my_arg
Step 2/12 : ARG ENV
Step 3/12 : FROM centos:7 AS base
Step 4/12 : RUN echo "do stuff with the centos image"
do stuff with the centos image
Step 5/12 : FROM base AS branch-version-1
Step 6/12 : RUN echo "this is the stage that sets VAR=TRUE"
this is the stage that sets VAR=TRUE
Step 7/12 : ENV VAR=TRUE
Step 8/12 : FROM base AS branch-version-2
Step 9/12 : RUN echo "this is the stage that sets VAR=FALSE"
this is the stage that sets VAR=FALSE
Step 10/12 : ENV VAR=FALSE
Step 11/12 : FROM branch-version-${my_arg}
Step 12/12 : RUN echo "VAR is equal to ${VAR}"
VAR is equal to FALSE

my_arg==1

docker build --build-arg my_arg=1 .
...
Step 11/12 : FROM branch-version-${my_arg}
Step 12/12 : RUN echo "VAR is equal to ${VAR}"
VAR is equal to TRUE

Thanks to Tõnis for this amazing idea!

In Maven you can configure the surefire plugin

<plugin>
    <groupId>org.apache.maven.plugins</groupId>
    <artifactId>maven-surefire-plugin</artifactId>
    <version>2.9</version>
    <configuration>
        <argLine>-Xmx256M</argLine>
    </configuration>
</plugin>

If you use Maven for builds then this configuration will be carried in the source tree and applied when tests are carried out. See the Maven Surefire Plugin documentation.

How about

Select I.Fee
From Item I
WHERE  (days(GETDATE()) - days(I.DateCreated) < 365)

C:\ <path to android sdk> \tools\source.properties (open with notepad)

There you will find it.

#ifndef <token>
/* code */
#else
/* code to include if the token is defined */
#endif

#ifndef checks whether the given token has been #defined earlier in the file or in an included file; if not, it includes the code between it and the closing #else or, if no #else is present, #endif statement. #ifndef is often used to make header files idempotent by defining a token once the file has been included and checking that the token was not set at the top of that file.

#ifndef _INCL_GUARD
#define _INCL_GUARD
#endif

As an alternative, I have a library that makes it easy to work with procs: https://www.nuget.org/packages/SprocMapper/

SqlServerAccess sqlAccess = new SqlServerAccess("your connection string");
    sqlAccess.Procedure()
         .AddSqlParameter("@FirstName", SqlDbType.VarChar, txtFirstName.Text)
         .AddSqlParameter("@FirstName", SqlDbType.VarChar, txtLastName.Text)
         .ExecuteNonQuery("StoredProcedureName");

Try this for selecting div by first id

$('div[id^="c-"]')

It happens when you mix UNIX and Windows git clients because Windows doesn't really have the concept of the "x" bit so your checkout of a rw-r--r-- (0644) file under Windows is "promoted" by the msys POSIX layer to be rwx-r-xr-x (0755). git considers that mode difference to be basically the same as a textual difference in the file, so your patch does not directly apply. I think your only good option here is to set core.filemode to false (using git-config).

Here's a msysgit issue with some related info: http://code.google.com/p/msysgit/issues/detail?id=164 (rerouted to archive.org's 3 Dec 2013 copy)

if ( $("#txt").val().length == 0 )
{
  // do something
}

I had to add in the == to get it to work for me, otherwise it ignored the condition even with empty text input. May help someone.

This may be a long shot, but Crystal Reports for Eclipse is free. I'm not sure if it will work, but if all you need is to edit some static text, you could get that version of CR and get the job done.

Try this

declare @v varchar(20)
set @v = 'Number'
select case when isnumeric(@v) = 1 then @v
else @v end

and

declare @v varchar(20)
set @v = '7082.7758172'
select case when isnumeric(@v) = 1 then @v
else convert(numeric(18,0),@v) end

This function reads a CSV file of 15MB and copies its content into a sheet in about 3 secs. What is probably taking a lot of time in your code is the fact that you copy data cell by cell instead of putting the whole content at once.

Option Explicit

Public Sub test()

  copyDataFromCsvFileToSheet "C:\temp\test.csv", ",", "Sheet1"

End Sub

Private Sub copyDataFromCsvFileToSheet(parFileName As String, parDelimiter As String, parSheetName As String)

  Dim data As Variant

  data = getDataFromFile(parFileName, parDelimiter)
  If Not isArrayEmpty(data) Then
    With Sheets(parSheetName)
      .Cells.ClearContents
      .Cells(1, 1).Resize(UBound(data, 1), UBound(data, 2)) = data
    End With
  End If

End Sub

Public Function isArrayEmpty(parArray As Variant) As Boolean
'Returns false if not an array or dynamic array that has not been initialised (ReDim) or has been erased (Erase)

  If IsArray(parArray) = False Then isArrayEmpty = True
  On Error Resume Next
  If UBound(parArray) < LBound(parArray) Then isArrayEmpty = True: Exit Function Else: isArrayEmpty = False

End Function

Private Function getDataFromFile(parFileName As String, parDelimiter As String, Optional parExcludeCharacter As String = "") As Variant
'parFileName is supposed to be a delimited file (csv...)
'parDelimiter is the delimiter, "," for example in a comma delimited file
'Returns an empty array if file is empty or can't be opened
'number of columns based on the line with the largest number of columns, not on the first line
'parExcludeCharacter: sometimes csv files have quotes around strings: "XXX" - if parExcludeCharacter = """" then removes the quotes


  Dim locLinesList() As Variant
  Dim locData As Variant
  Dim i As Long
  Dim j As Long
  Dim locNumRows As Long
  Dim locNumCols As Long
  Dim fso As Variant
  Dim ts As Variant
  Const REDIM_STEP = 10000

  Set fso = CreateObject("Scripting.FileSystemObject")

  On Error GoTo error_open_file
  Set ts = fso.OpenTextFile(parFileName)
  On Error GoTo unhandled_error

  'Counts the number of lines and the largest number of columns
  ReDim locLinesList(1 To 1) As Variant
  i = 0
  Do While Not ts.AtEndOfStream
    If i Mod REDIM_STEP = 0 Then
      ReDim Preserve locLinesList(1 To UBound(locLinesList, 1) + REDIM_STEP) As Variant
    End If
    locLinesList(i + 1) = Split(ts.ReadLine, parDelimiter)
    j = UBound(locLinesList(i + 1), 1) 'number of columns
    If locNumCols < j Then locNumCols = j
    i = i + 1
  Loop

  ts.Close

  locNumRows = i

  If locNumRows = 0 Then Exit Function 'Empty file

  ReDim locData(1 To locNumRows, 1 To locNumCols + 1) As Variant

  'Copies the file into an array
  If parExcludeCharacter <> "" Then

    For i = 1 To locNumRows
      For j = 0 To UBound(locLinesList(i), 1)
        If Left(locLinesList(i)(j), 1) = parExcludeCharacter Then
          If Right(locLinesList(i)(j), 1) = parExcludeCharacter Then
            locLinesList(i)(j) = Mid(locLinesList(i)(j), 2, Len(locLinesList(i)(j)) - 2)       'If locTempArray = "", Mid returns ""
          Else
            locLinesList(i)(j) = Right(locLinesList(i)(j), Len(locLinesList(i)(j)) - 1)
          End If
        ElseIf Right(locLinesList(i)(j), 1) = parExcludeCharacter Then
          locLinesList(i)(j) = Left(locLinesList(i)(j), Len(locLinesList(i)(j)) - 1)
        End If
        locData(i, j + 1) = locLinesList(i)(j)
      Next j
    Next i

  Else

    For i = 1 To locNumRows
      For j = 0 To UBound(locLinesList(i), 1)
        locData(i, j + 1) = locLinesList(i)(j)
      Next j
    Next i

  End If

  getDataFromFile = locData

  Exit Function

error_open_file:             'returns empty variant
unhandled_error:             'returns empty variant

End Function

var random = items[Math.floor(Math.random()*items.length)]

Another nice thing about @HostBinding is that you can combine it with @Input if your binding relies directly on an input, eg:

@HostBinding('class.fixed-thing')
@Input()
fixed: boolean;

You can only launch apps that have registered a URL scheme. Then just like you open the SMS app by using sms:, you'll be able to open the app using their URL scheme.

There is a very good example available in the docs called LaunchMe which demonstrates this.

LaunchMe sample code as of 6th Nov 2017.

Radio buttons have another attribute - checked or unchecked. You need to set which button was selected by the user, so you have to write PHP code inside the HTML with these values - checked or unchecked. Here's one way to do it:

The PHP code:

<?PHP
    $male_status = 'unchecked';
    $female_status = 'unchecked';

    if (isset($_POST['Submit1'])) {
         $selected_radio = $_POST['gender'];

         if ($selected_radio == 'male') {
                $male_status = 'checked';
          }else if ($selected_radio == 'female') {
                $female_status = 'checked';
          }
    }
?>

The HTML FORM code:

<FORM name ="form1" method ="post" action ="radioButton.php">
   <Input type = 'Radio' Name ='gender' value= 'male'
   <?PHP print $male_status; ?>
   >Male
   <Input type = 'Radio' Name ='gender' value= 'female' 
   <?PHP print $female_status; ?>
   >Female
   <P>
   <Input type = "Submit" Name = "Submit1" VALUE = "Select a Radio Button">
</FORM>

import org.apache.spark.sql.functions.desc

df.orderBy(desc("columnname1"),desc("columnname2"),asc("columnname3"))

Try to use Date.CultureInfo.formatPatterns.shortDate

Actually got the same problem. For me worked this easy way:

Adding the data to a Datatable and sort it:

dt.DefaultView.Sort = "columnname";
dt = dt.DefaultView.ToTable();

I have created a simple MySQL procedure as given below:

DELIMITER //
CREATE PROCEDURE GetAllListings()
 BEGIN
 SELECT nid, type, title  FROM node where type = 'lms_listing' order by nid desc;
END //
DELIMITER;

Kindly follow this. After the procedure created, you can see the same and execute it.

Invoke-Sqlcmd -Query "sp_who" -ServerInstance . -QueryTimeout 3

while true ; do
    ...
    if [ something ]; then
        break
    fi
done

actually, I found this in the code of a php based cms.

redirect('?module=blog', 0);

so it is possible. In this case, you are logged in at the admin level, so no harm no foul (I suppose). the first part is the url, and the second? I can't find any documentation for what the integer is for, but I guess it's either time, or data since it is attached to a form.

I, too, wanted to refresh a page after an event, and placing this in a better spot worked out well.

I faced the same problem and solved it by adding:

System.setProperty("https.protocols", "TLSv1,TLSv1.1,TLSv1.2");

before openConnection method.

Mainly I use the following command under the cmd

pip install pyqt5

And it works with no problem!

As an alternative to explicitly catching and handling the exception you could tell Oracle to catch and automatically ignore the exception by including a /*+ hint */ in the insert statement. This is a little faster than explicitly catching the exception and then articulating how it should be handled. It is also easier to setup. The downside is that you do not get any feedback from Oracle that an exception was caught.

Here is an example where we would be selecting from another table, or perhaps an inner query, and inserting the results into a table called TABLE_NAME which has a unique constraint on a column called IDX_COL_NAME.

INSERT /*+ ignore_row_on_dupkey_index(TABLE_NAME(IDX_COL_NAME)) */ 
INTO TABLE_NAME(
    INDEX_COL_NAME
  , col_1
  , col_2
  , col_3
  , ...
  , col_n)
SELECT 
    INDEX_COL_NAME
  , col_1
  , col_2
  , col_3
  , ...
  , col_n);

This is not a great solution if your goal it to catch and handle (i.e. print out or update the row that is violating the constraint). But if you just wanted to catch it and ignore the violating row then then this should do the job.

There's a third way that doesn't require a converter or a change to your view model: use a style:

<Style TargetType="Button">
   <Setter Property="Visibility" Value="Collapsed"/>
   <Style.Triggers>
      <DataTrigger Binding="{Binding IsVisible}" Value="True">
         <Setter Property="Visibility" Value="Visible"/>
      </DataTrigger>
   </Style.Triggers>
</Style>

I tend to prefer this technique because I use it in a lot of cases where what I'm binding to is not boolean - e.g. displaying an element only if its DataContext is not null, or implementing multi-state displays where different layouts appear based on the setting of an enum in the view model.

The other answer is very detailed and addresses the bulk of the questions raised by the OP.

To elaborate, and specifically to address the OP's question of "How does OAuth 2 protect against things like replay attacks using the Security Token?", there are two additional protections in the official recommendations for implementing OAuth 2:

1) Tokens will usually have a short expiration period (http://tools.ietf.org/html/rfc6819#section-5.1.5.3):

A short expiration time for tokens is a means of protection against the following threats:

• replay...

2) When the token is used by Site A, the recommendation is that it will be presented not as URL parameters but in the Authorization request header field (http://tools.ietf.org/html/rfc6750):

Clients SHOULD make authenticated requests with a bearer token using the "Authorization" request header field with the "Bearer" HTTP authorization scheme. ...

The "application/x-www-form-urlencoded" method SHOULD NOT be used except in application contexts where participating browsers do not have access to the "Authorization" request header field. ...

URI Query Parameter... is included to document current use; its use is not recommended, due to its security deficiencies

You can also view package.json to manually in a text editor, see what packages are dependencies. Use this if npm list isn't working as a manual alternative.

You can use the spread operator to convert Map.keys() iterator in an Array.

let myMap = new Map().set('a', 1).set('b', 2).set(983, true)_x000D_
let keys = [...myMap.keys()]_x000D_
console.log(keys)

There's a python module especially made for reading and writing to and from binary encoded data called 'struct'. Since versions of Python under 2.6 doesn't support str.format, a custom method needs to be used to create binary formatted strings.

import struct

# binary string
def bstr(n): # n in range 0-255
    return ''.join([str(n >> x & 1) for x in (7,6,5,4,3,2,1,0)])

# read file into an array of binary formatted strings.
def read_binary(path):
    f = open(path,'rb')
    binlist = []
    while True:
        bin = struct.unpack('B',f.read(1))[0] # B stands for unsigned char (8 bits)
        if not bin:
            break
        strBin = bstr(bin)
        binlist.append(strBin)
    return binlist

This thing worked for me:

$scriptOutput = (cmd /s /c $FilePath $ArgumentList)

select (SYSDATE-DOB)/365 "Age" from dual

Just adding this answer in case others are directed here by Google Search as I was. I used the elevate module in my Python script and the script executed with Administrator Privileges in Windows 10.

https://pypi.org/project/elevate/

To demonstrate, consider the following set, which holds different Person objects:

Set<Person> people = new HashSet<Person>();
people.add(new Person("Tharindu", 10));
people.add(new Person("Martin", 20));
people.add(new Person("Fowler", 30));

Person Model Class

public class Person {
    private String name;
    private int age;

    public Person(String name, int age) {
        this.name = name;
        this.age = age;
    }

    //TODO - getters,setters ,overridden toString & compareTo methods

}

1. The for statement has a form designed for iteration through Collections and arrays .This form is sometimes referred to as the enhanced for statement, and can be used to make your loops more compact and easy to read.

for(Person p:people){
  System.out.println(p.getName());
}

2. Java 8 - java.lang.Iterable.forEach(Consumer)

people.forEach(p -> System.out.println(p.getName()));

default void forEach(Consumer<? super T> action)

Performs the given action for each element of the Iterable until all elements have been processed or the action throws an exception. Unless otherwise specified by the implementing class, actions are performed in the order of iteration (if an iteration order is specified). Exceptions thrown by the action are relayed to the caller. Implementation Requirements:

The default implementation behaves as if: 

for (T t : this)
     action.accept(t);

Parameters: action - The action to be performed for each element

Throws: NullPointerException - if the specified action is null

Since: 1.8

tl;dr

java.time.temporal.ChronoUnit.DAYS.between( 
    earlier.toLocalDate(), 
    later.toLocalDate() 
)

…or…

java.time.temporal.ChronoUnit.HOURS.between( 
    earlier.truncatedTo( ChronoUnit.HOURS )  , 
    later.truncatedTo( ChronoUnit.HOURS ) 
)

java.time

FYI, the Joda-Time project is now in maintenance mode, with the team advising migration to the java.time classes.

The equivalent of Joda-Time DateTime is ZonedDateTime.

ZoneId z = ZoneId.of( "Pacific/Auckland" ) ;
ZonedDateTime now = ZonedDateTime.now( z ) ;

Apparently you want to count the days by dates, meaning you want to ignore the time of day. For example, starting a minute before midnight and ending a minute after midnight should result in a single day. For this behavior, extract a LocalDate from your ZonedDateTime. The LocalDate class represents a date-only value without time-of-day and without time zone.

LocalDate localDateStart = zdtStart.toLocalDate() ;
LocalDate localDateStop = zdtStop.toLocalDate() ;

Use the ChronoUnit enum to calculate elapsed days or other units.

long days = ChronoUnit.DAYS.between( localDateStart , localDateStop ) ;

Truncate

As for you asking about a more general way to do this counting where you are interested the delta of hours as hour-of-the-clock rather than complete hours as spans-of-time of sixty minutes, use the truncatedTo method.

Here is your example of 14:45 to 15:12 on same day.

ZoneId z = ZoneId.of( "America/Montreal" ); 
ZonedDateTime start = ZonedDateTime.of( 2017 , 1 , 17 , 14 , 45 , 0 , 0 , z );
ZonedDateTime stop = ZonedDateTime.of( 2017 , 1 , 17 , 15 , 12 , 0 , 0 , z );

long hours = ChronoUnit.HOURS.between( start.truncatedTo( ChronoUnit.HOURS ) , stop.truncatedTo( ChronoUnit.HOURS ) );

1

This does not work for days. Use toLocalDate() in this case.

About java.time

The java.time framework is built into Java 8 and later. These classes supplant the troublesome old legacy date-time classes such as java.util.Date, Calendar, & SimpleDateFormat.

The Joda-Time project, now in maintenance mode, advises migration to the java.time classes.

To learn more, see the Oracle Tutorial. And search Stack Overflow for many examples and explanations. Specification is JSR 310.

You may exchange java.time objects directly with your database. Use a JDBC driver compliant with JDBC 4.2 or later. No need for strings, no need for java.sql.* classes.

Where to obtain the java.time classes?

• Java SE 8, Java SE 9, Java SE 10, and later
  • Built-in.
  • Part of the standard Java API with a bundled implementation.
  • Java 9 adds some minor features and fixes.
• Java SE 6 and Java SE 7
  • Much of the java.time functionality is back-ported to Java 6 & 7 in ThreeTen-Backport.
• Android
  • Later versions of Android bundle implementations of the java.time classes.
  • For earlier Android (<26), the ThreeTenABP project adapts ThreeTen-Backport (mentioned above). See How to use ThreeTenABP….

The ThreeTen-Extra project extends java.time with additional classes. This project is a proving ground for possible future additions to java.time. You may find some useful classes here such as Interval, YearWeek, YearQuarter, and more.

The ThreeTen-Extra project extends java.time with additional classes. This project is a proving ground for possible future additions to java.time. You may find some useful classes here such as Interval, YearWeek, YearQuarter, and more.

Class that will call the methods:

namespace myNamespace
{
    public class myClass
    {
        public static void voidMethodWithoutParameters()
        {
            // code here
        }
        public static string stringReturnMethodWithParameters(string param1, string param2)
        {
            // code here
            return "output";
        }
    }
}

Calling myClass static methods using Reflection:

var myClassType = Assembly.GetExecutingAssembly().GetType(GetType().Namespace + ".myClass");
                    
// calling my void Method that has no parameters.
myClassType.GetMethod("voidMethodWithoutParameters", BindingFlags.Public | BindingFlags.Static).Invoke(null, null);

// calling my string returning Method & passing to it two string parameters.
Object methodOutput = myClassType.GetMethod("stringReturnMethodWithParameters", BindingFlags.Public | BindingFlags.Static).Invoke(null, new object[] { "value1", "value1" });
Console.WriteLine(methodOutput.ToString());

Note: I don't need to instantiate an object of myClass to use it's methods, as the methods I'm using are static.

Great resources:

• How C# Reflection Works
• MethodBase.Invoke Method