Try /usr/local/mysql/bin/mysqld_safe
Example:
shell> sudo /usr/local/mysql/bin/mysqld_safe
(Enter your password, if necessary)
(Press Control-Z)
shell> bg
(Press Control-D or enter "exit" to exit the shell)
You can also add these to your bash startup scripts:
export MYSQL_HOME=/usr/local/mysql
alias start_mysql='sudo $MYSQL_HOME/bin/mysqld_safe &'
alias stop_mysql='sudo $MYSQL_HOME/bin/mysqladmin shutdown'
hi body very late but i am writing
if(mylist.contains(value)){}
1 - If you have spaces and want tabs.
First, you need to decide how many spaces will have a single tab. That said, suppose you have lines with leading 4 spaces, or 8... Than you realize you probably want a tab to be 4 spaces. Now with that info, you do:
:set ts=4
:set noet
:%retab!
There is a problem here! This sequence of commands will look for all your text, not only spaces in the begin of the line. That mean a string like: "Hey,?this????is?4?spaces"
will become "Hey,?this?is?4?spaces"
, but its not! its a tab!.
To settle this little problem I recomend a search
, instead of retab
.
:%s/^\(^I*\)????/\1^I/g
This search will look in the whole file for any lines starting with whatever number of tabs, followed by 4 spaces, and substitute it for whatever number of tabs it found plus one.
This, unfortunately, will not run at once!
At first, the file will have lines starting with spaces. The search will then convert only the first 4 spaces to a tab, and let the following...
You need to repeat the command. How many times? Until you get a pattern not found
. I cannot think of a way to automatize the process yet. But if you do:
`10@:`
You are probably done. This command repeats the last search/replace for 10 times. Its not likely your program will have so many indents. If it has, just repeat again @@
.
Now, just to complete the answer. I know you asked for the opposite, but you never know when you need to undo things.
2 - You have tabs and want spaces.
First, decide how many spaces you want your tabs to be converted to. Lets say you want each tab to be 2 spaces. You then do:
:set ts=2
:set et
:%retab!
This would have the same problem with strings. But as its better programming style to not use hard tabs inside strings, you actually are doing a good thing here. If you really need a tab inside a string, use \t
.
Try moving that mysql.bak
directory out of /var/lib/mysql
to say /root/
or something. It seems like mysql is finding that and it may be causing that ERROR 1102 (42000): Incorrect database name 'mysql.bak'
error.
Access the dictionary with square brackets.
strikes = [number_map[int(x)] for x in input_str.split()]
<table class="table border">
<thead>
<tr>
<ng-container *ngFor="let column of columns; let i = index">
<th>{{ column }}</th>
</ng-container>
</tr>
</thead>
<tbody>
<tr *ngFor="let row of groups;let i = index">
<td>{{row.name}}</td>
<td>{{row.items}}</td>
<td >
<span class="status" *ngFor="let item of row.Status | slice:0:2;let j = index">
{{item.name}}
</span><span *ngIf = "i < 2" class="dots" (mouseenter) ="onHover(i)" (mouseleave) ="onHover(-1)">.....</span> <span [hidden] ="test" *ngIf = "i == hoverIndex" class="hover-details"><span *ngFor="let item of row.Status;let j = index">
{{item.name}}
</span></span>
</td>
</tr>
</tbody>
</table>
<p *ngFor="let group of usersg"><input type="checkbox" [checked]="isChecked(group.id)" value="{{group.id}}" />{{group.name}}</p>
<p><select [(ngModel)]="usersr_selected.id">
<option *ngFor="let role of usersr" value="{{role.id}}">{{role.name}}</option>
</select></p>
import { Component, OnInit } from '@angular/core';
import { CommonserviceService } from './../utilities/services/commonservice.service';
import { FormBuilder, FormGroup, Validators } from '@angular/forms';
@Component({
selector: 'app-home',
templateUrl: './home.component.html',
styleUrls: ['./home.component.css']
})
export class HomeComponent implements OnInit {
getListData: any;
dataGroup: FormGroup;
selectedGroups: string[];
submitted = false;
usersg_checked:any;
usersr_selected:any;
dotsh:any;
hoverIndex:number = -1;
groups:any;
test:any;
constructor(private formBuilder: FormBuilder) {
}
onHover(i:number){
this.hoverIndex = i;
}
columns = ["name", "Items","status"];
public usersr = [{
"id": 1,
"name": "test1"
}, {
"id": 2,
"name": "test2",
}];
ngOnInit() {
this.test = false;
this.groups=[{
"id": 1,
"name": "pencils",
"items": "red pencil",
"Status": [{
"id": 1,
"name": "green"
}, {
"id": 2,
"name": "red"
}, {
"id": 3,
"name": "yellow"
}],
"loc": [{
"id": 1,
"name": "loc 1"
}, {
"id": 2,
"name": "loc 2"
}, {
"id": 3,
"name": "loc 3"
}]
},
{
"id": 2,
"name": "rubbers",
"items": "big rubber",
"Status": [{
"id": 1,
"name": "green"
}, {
"id": 2,
"name": "red"
}],
"loc": [{
"id": 1,
"name": "loc 2"
}, {
"id": 2,
"name": "loc 3"
}]
},
{
"id": 3,
"name": "rubbers1",
"items": "big rubber1",
"Status": [{
"id": 1,
"name": "green"
}],
"loc": [{
"id": 1,
"name": "loc 2"
}, {
"id": 2,
"name": "loc 3"
}]
}
];
this.dotsh = false;
console.log(this.groups.length);
this.usersg_checked = [{
"id": 1,
"name": "test1"
}, {
"id": 2,
"name": "test2",
}];
this.usersr_selected = {"id":1,"name":"test2"};;
this.selectedGroups = [];
this.dataGroup = this.formBuilder.group({
email: ['', Validators.required]
});
}
isChecked(id) {
console.log(this.usersg_checked);
return this.usersg_checked.some(item => item.id === id);
}
get f() { return this.dataGroup.controls; }
onCheckChange(event) {
if (event.target.checked) {
this.selectedGroups.push(event.target.value);
} else {
const index = this.selectedGroups.findIndex(item => item === event.target.value);
if (index !== -1) {
this.selectedGroups.splice(index, 1);
}
}
}
getFormData(value){
this.submitted = true;
// stop here if form is invalid
if (this.dataGroup.invalid) {
return;
}
value['groups'] = this.selectedGroups;
console.log(value);
}
}
.status{
border: 1px solid;
border-radius: 4px;
padding: 0px 10px;
margin-right: 10px;
}
.hover-details{
position: absolute;
border: 1px solid;
padding: 10px;
width: 164px;
text-align: left;
border-radius: 4px;
}
.dots{
position:relative;
}
For external keystores, prefix with "file:"
server.ssl.key-store=file:config/keystore
Unfortunately, this is not currently possible in the latest version of DataContractJsonSerializer. See: http://connect.microsoft.com/VisualStudio/feedback/details/558686/datacontractjsonserializer-should-serialize-dictionary-k-v-as-a-json-associative-array
The current suggested workaround is to use the JavaScriptSerializer as Mark suggested above.
Good luck!
var totop = $('#totop');
totop.click(function(){
$('html, body').stop(true,true).animate({scrollTop:0}, 1000);
return false;
});
$(window).scroll(function(){
if ($(this).scrollTop() > 100){
totop.fadeIn();
}else{
totop.fadeOut();
}
});
<img id="totop" src="img/arrow_up.png" title="Click to go Up" style="display:none;position:fixed;bottom:10px;right:10px;cursor:pointer;cursor:hand;"/>
keyPressed - when the key goes down
keyReleased - when the key comes up
keyTyped - when the unicode character represented by this key is sent by the keyboard to system input.
I personally would use keyReleased for this. It will fire only when they lift their finger up.
Note that keyTyped will only work for something that can be printed (I don't know if F5 can or not) and I believe will fire over and over again if the key is held down. This would be useful for something like... moving a character across the screen or something.
Cached files are indeed stored in /data/data/my_app_package/cache
Make sure to store the files using the following method:
String cacheDir = context.getCacheDir();
File imageFile = new File(cacheDir, "image1.jpg");
FileOutputStream out = new FileOutputStream(imageFile);
out.write(imagebuffer, 0, imagebufferlength);
where imagebuffer[] contains image data in byte format and imagebufferlength is the length of the content to be written to the FileOutputStream.
Now, you may look at DDMS File Explorer or do an "adb shell" and cd to /data/data/my_app_package/cache and do an "ls". You will find the image files you have stored through code in this directory.
Moreover, from Android documentation:
If you'd like to cache some data, rather than store it persistently, you should use getCacheDir() to open a File that represents the internal directory where your application should save temporary cache files.
When the device is low on internal storage space, Android may delete these cache files to recover space. However, you should not rely on the system to clean up these files for you. You should always maintain the cache files yourself and stay within a reasonable limit of space consumed, such as 1MB. When the user uninstalls your application, these files are removed.
You'll need to send the image back base64 encoded, look at this: http://php.net/manual/en/function.base64-encode.php
Then in your ajax call change the success function to this:
$('.div_imagetranscrits').html('<img src="data:image/png;base64,' + data + '" />');
The simple answer is: ^[1-9][0-9]*$
And with Prototype:
$('yourDivId').setStyle({top: '100px', left:'80px'});
Alright, so I got it working by changing this
log4j.rootLogger=DebugAppender
to this
log4j.rootLogger=DEBUG, DebugAppender
Apparently you have to specify the logging level to the rootLogger
first? I apologize if I wasted anyone's time.
Also, I decided to answer my own question because this wasn't a classpath issue.
We may need more information. Here is what I did to reproduce on SQL Server 2008:
CREATE DATABASE [Test] ON PRIMARY
(
NAME = N'Test'
, FILENAME = N'...Test.mdf'
, SIZE = 3072KB
, FILEGROWTH = 1024KB
)
LOG ON
(
NAME = N'Test_log'
, FILENAME = N'...Test_log.ldf'
, SIZE = 1024KB
, FILEGROWTH = 10%
)
COLLATE SQL_Latin1_General_CP850_BIN2
GO
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[MyTable]
(
[SomeCol] [varchar](50) NULL
) ON [PRIMARY]
GO
Insert MyTable( SomeCol )
Select '±' Collate SQL_Latin1_General_CP1_CI_AS
GO
Select SomeCol, SomeCol Collate SQL_Latin1_General_CP1_CI_AS
From MyTable
Results show the original character. Declaring collation in the query should return the proper character from SQL Server's perspective however it may be the case that the presentation layer is then converting to something yet different like UTF-8.
This is a working example of making ZIPs in PHP:
$zip = new ZipArchive();
$zip_name = time().".zip"; // Zip name
$zip->open($zip_name, ZipArchive::CREATE);
foreach ($files as $file) {
echo $path = "uploadpdf/".$file;
if(file_exists($path)){
$zip->addFromString(basename($path), file_get_contents($path));
}
else{
echo"file does not exist";
}
}
$zip->close();
May be this will help:
Getting rows from DB:
public static DataRowCollection getAllUsers(string tableName)
{
DataSet set = new DataSet();
SqlCommand comm = new SqlCommand();
comm.Connection = DAL.DAL.conn;
comm.CommandType = CommandType.StoredProcedure;
comm.CommandText = "getAllUsers";
SqlDataAdapter da = new SqlDataAdapter();
da.SelectCommand = comm;
da.Fill(set,tableName);
DataRowCollection usersCollection = set.Tables[tableName].Rows;
return usersCollection;
}
Populating DataGridView from DataRowCollection :
public static void ShowAllUsers(DataGridView grdView,string table, params string[] fields)
{
DataRowCollection userSet = getAllUsers(table);
foreach (DataRow user in userSet)
{
grdView.Rows.Add(user[fields[0]],
user[fields[1]],
user[fields[2]],
user[fields[3]]);
}
}
Implementation :
BLL.BLL.ShowAllUsers(grdUsers,"eusers","eid","euname","eupassword","eposition");
One aspect of the Map that is not given much press here is lookup. According to the spec:
A Map object must be implemented using either hash tables or other mechanisms that, on average, provide access times that are sublinear on the number of elements in the collection. The data structures used in this Map objects specification is only intended to describe the required observable semantics of Map objects. It is not intended to be a viable implementation model.
For collections that have a huge number of items and require item lookups, this is a huge performance boost.
TL;DR - Object lookup is not specified, so it can be on order of the number of elements in the object, i.e., O(n). Map lookup must use a hash table or similar, so Map lookup is the same regardless of Map size, i.e. O(1).
private String betweenComma(ArrayList<String> strings) {
String united = "";
for (String string : strings) {
united = united + "," + string;
}
return united.replaceFirst(",", "");
}
I realize this is stale for a while and an answer had been selected, but how about the alternative to allow the foreign key to be NULL and then choose ON DELETE SET NULL.
Basically, your table should be changed like so:
ALTER TABLE 'bericht'
DROP FOREIGN KEY 'your_foreign_key';
ALTER TABLE 'bericht'
ADD CONSTRAINT 'your_foreign_key' FOREIGN KEY ('column_foreign_key') REFERENCES 'other_table' ('column_parent_key') ON UPDATE CASCADE ON DELETE SET NULL;
Personally I would recommend using both "ON UPDATE CASCADE" as well as "ON DELETE SET NULL" to avoid unnecessary complications, however your set up may dictate a different approach.
Hope this helps.
var span = TimeSpan.FromMinutes(2);
var t = Task.Factory.StartNew(async delegate / () =>
{
this.SomeAsync();
await Task.Delay(span, source.Token);
}, source.Token, TaskCreationOptions.LongRunning, TaskScheduler.Default);
source.Cancel(true/or not);
// or use ThreadPool(whit defaul options thread) like this
Task.Start(()=>{...}), source.Token)
if u like use some loop thread inside ...
public async void RunForestRun(CancellationToken token)
{
var t = await Task.Factory.StartNew(async delegate
{
while (true)
{
await Task.Delay(TimeSpan.FromSeconds(1), token)
.ContinueWith(task => { Console.WriteLine("End delay"); });
this.PrintConsole(1);
}
}, token) // drop thread options to default values;
}
// And somewhere there
source.Cancel();
//or
token.ThrowIfCancellationRequested(); // try/ catch block requred.
If using ASP.NET Core, you can adjust the accepted answer to:
<a href="@Url.Action("Index", null, new { area = string.Empty, controller = "User" }, @Context.Request.Scheme)">
<span>Clients</span>
</a>
replacing @Request.Url.Scheme
with @Context.Request.Scheme
Numeric precision refers to the maximum number of digits that are present in the number.
ie 1234567.89 has a precision of 9
Numeric scale refers to the maximum number of decimal places
ie 123456.789 has a scale of 3
Thus the maximum allowed value for decimal(5,2) is 999.99
Use explode()
$arr = explode("/", $string, 2);
$first = $arr[0];
In this case, I'm using the limit
parameter to explode
so that php won't scan the string any more than what's needed.
To convert Hex strings to INT, I have used this in the past. It can be modified to convert any base to INT in fact (Octal, Binary, whatever)
Declare @Str varchar(200)
Set @str = 'F000BE1A'
Declare @ndx int
Set @ndx = Len(@str)
Declare @RunningTotal BigInt
Set @RunningTotal = 0
While @ndx > 0
Begin
Declare @Exponent BigInt
Set @Exponent = Len(@Str) - @ndx
Set @RunningTotal = @RunningTotal +
Power(16 * 1.0, @Exponent) *
Case Substring(@str, @ndx, 1)
When '0' then 0
When '1' then 1
When '2' then 2
When '3' then 3
When '4' then 4
When '5' then 5
When '6' then 6
When '7' then 7
When '8' then 8
When '9' then 9
When 'A' then 10
When 'B' then 11
When 'C' then 12
When 'D' then 13
When 'E' then 14
When 'F' then 15
End
Set @ndx = @ndx - 1
End
Print @RunningTotal
You need to initialize the list first:
protected List<string> list = new List<string>();
Try absolute positioning:
<div style="position:relative;width:100%;">
<div id="help" style="
position:absolute;
top: 0;
right: 0;
bottom: 0;
left: 0;
z-index:1;">
<img src="/portfolio/space_1_header.png" border="0" style="width:100%;">
</div>
</div>
Add the following jars to the class path or lib folder
You can add any type of HTML with methods like append
and appendTo
(among others):
Example:
$('form#someform').append('<input type="text" name="something" id="something" />');
Don’t add the .table
class to your <table>
tag. From the Bootstrap docs on tables:
For basic styling—light padding and only horizontal dividers—add the base class
.table
to any<table>
. It may seem super redundant, but given the widespread use of tables for other plugins like calendars and date pickers, we've opted to isolate our custom table styles.
If they are separate classes you can do something like the following:
class A
{
private $name;
public function __construct()
{
$this->name = 'Some Name';
}
public function getName()
{
return $this->name;
}
}
class B
{
private $a;
public function __construct(A $a)
{
$this->a = $a;
}
function getNameOfA()
{
return $this->a->getName();
}
}
$a = new A();
$b = new B($a);
$b->getNameOfA();
What I have done in this example is first create a new instance of the A
class. And after that I have created a new instance of the B
class to which I pass the instance of A
into the constructor. Now B
can access all the public members of the A
class using $this->a
.
Also note that I don't instantiate the A
class inside the B
class because that would mean I tighly couple the two classes. This makes it hard to:
B
classA
class for another classIf you are running out of connections like this, chances are excellent that you are not closing the connections that you have open.
Review code that opens connections and ensure the connections are closed as soon as practical. Typically you want to make use of the using keyword around anything that implements IDisposable (including database connections) to ensure that such objects are disposed as soon as they leave the scope where they are needed.
You can check the current number of active connections with this query:
show processlist
Create your own array.
<select name="cmpPro" ng-model="test3.Product" ng-options="q for q in productArray track by q">
<option value="" >Plans</option>
</select>
productArray =[];
angular.forEach($scope.leadDetail, function(value,key){
var index = $scope.productArray.indexOf(value.Product);
if(index === -1)
{
$scope.productArray.push(value.Product);
}
});
Yes you can do it with String.format
:
String result = String.format("%.2f", 10.0 / 3.0);
// result: "3.33"
result = String.format("%.3f", 2.5);
// result: "2.500"
Try this:
#!/bin/bash
stat --format %y $(ls -t $(find alfa/ -type f) | head -n 1)
It uses find
to gather all files from the directory, ls
to list them sorted by modification date, head
for selecting the first file and finally stat
to show the time in a nice format.
At this time it is not safe for files with whitespace or other special characters in their names. Write a commend if it doesn't meet your needs yet.
The usual way would be:
if (a instanceof A)
However, there are cases when you can't do this, such as when A
in a generic argument.
Due to Java's type erasure, the following won't compile:
<A> boolean someMethod(Object a) {
if (a instanceof A)
...
}
and the following won't work (and will produce an unchecked cast
warning):
<A> void someMethod(Object a) {
try {
A casted = (A)a;
} catch (ClassCastException e) {
...
}
}
You can't cast to A
at runtime, because at runtime, A
is essentially Object
.
The solutions to such cases is to use a Class
instead of the generic argument:
void someMethod(Object a, Class<A> aClass) {
if (aClass.isInstance(a)) {
A casted = aClass.cast(a);
...
}
}
You can then call the method as:
someMethod(myInstance, MyClass.class);
someMethod(myInstance, OtherClass.class);
First edit the Nginx configuration file (nginx.conf
)
Location: sudo nano /etc/nginx/nginx.conf
Add following codes:
http {
client_max_body_size 100M;
}
Then Add the following lines in PHP configuration file(php.ini
)
Location: sudo gedit /etc/php5/fpm/php.ini
Add following codes:
memory_limit = 128M
post_max_size = 20M
upload_max_filesize = 10M
Explanation from the Preshing on Programming blog:
It’s handy when you have two related operations which you’d like to execute as a pair, with a block of code in between. The classic example is opening a file, manipulating the file, then closing it:
with open('output.txt', 'w') as f: f.write('Hi there!')
The above with statement will automatically close the file after the nested block of code. (Continue reading to see exactly how the close occurs.) The advantage of using a with statement is that it is guaranteed to close the file no matter how the nested block exits. If an exception occurs before the end of the block, it will close the file before the exception is caught by an outer exception handler. If the nested block were to contain a return statement, or a continue or break statement, the with statement would automatically close the file in those cases, too.
I struggled with this a little because I wanted to use Knockout to bind the button to the click event. Here's my button and the relevant function from inside my view model.
<a class="btn btn-secondary showBusy" data-bind="click: back">Back to Dashboard</a>
var vm = function () {
...
self.back = function() {
window.location.href = '@Url.Action("LicenseDashboard", "Application")';
}
}
To keep the branching clean, you could do this:
git checkout newbranch
git branch newbranch2
git reset --hard <commit Id> # the commit at which you want to merge
git checkout master
git merge newbranch
git checkout newbranch2
This way, newbranch will end where it was merged into master, and you continue working on newbranch2.
this worker for me
git clone <repository> .
with this code, the id will not appear on the link
document.querySelectorAll('a[href^="#"]').forEach(anchor => {
anchor.addEventListener('click', function (e) {
e.preventDefault();
document.querySelector(this.getAttribute('href')).scrollIntoView({
behavior: 'smooth'
});
});
});
You can just use
datetime.date.today()
It's light and returns exactly what you want.
In MySQL Workbench:
Left-hand side navigator > Management > Client Connections
It gives you the option to kill queries and connections.
Note: this is not TOAD like the OP asked, but MySQL Workbench users like me may end up here
For me, I had set my project to run on the latest version of .Net Framework (a change from .Net Framework 4.6.1 to 4.7.2).
Everything worked, no errors and published without issue, and it was only by chance that I came across the System.Net.Http error message, shown in a small, hard-to-notice, but quite important API request over the website I'm working on.
I rolled back to 4.6.1 and everything is fine again.
"WORKSPACE" environment variable works for the latest version of Jenkins Pipeline. You can use this in your Jenkins file: "${env.WORKSPACE}"
Sample use below:
def files = findFiles glob: '**/reports/*.json'
for (def i=0; i<files.length; i++) {
jsonFilePath = "${files[i].path}"
jsonPath = "${env.WORKSPACE}" + "/" + jsonFilePath
echo jsonPath
hope that helps!!
BT version 2.0 or less - You should be able to pair/bond using a standard PIN code, entered programmatically e.g. 1234 or 0000. This is not very secure but many BT devices do this.
BT version 2.1 or greater - Mode 4 Secure Simple Pairing "just works" model can be used. It uses elliptical encryption (whatever that is) and is very secure but is open to Man In The Middle attacks. Compared to the old '0000' pin code approach it is light years ahead. This doesn't require any user input.
This is according to the Bluetooth specs but what you can use depends on what verson of the Bluetooth standard your stack supports and what API you have.
run the following
/usr/local/tomcat/bin/catalina.sh version
its response will be something like:
Using CATALINA_BASE: /usr/local/tomcat
Using CATALINA_HOME: /usr/local/tomcat
Using CATALINA_TMPDIR: /var/tmp/
Using JRE_HOME: /usr
Using CLASSPATH: /usr/local/tomcat/bin/bootstrap.jar:/usr/local/tomcat/bin/tomcat-juli.jar
Using CATALINA_PID: /var/catalina.pid
Server version: Apache Tomcat/7.0.30
Server built: Sep 27 2012 05:13:37
Server number: 7.0.30.0
OS Name: Linux
OS Version: 2.6.32-504.3.3.el6.x86_64
Architecture: amd64
JVM Version: 1.7.0_60-b19
JVM Vendor: Oracle Corporation
In general, one doesn't expand out log(a + b)
; you just deal with it as is. That said, there are occasionally circumstances where it makes sense to use the following identity:
log(a + b) = log(a * (1 + b/a)) = log a + log(1 + b/a)
(In fact, this identity is often used when implementing log
in math libraries).
Use the keys
method: {"apple" => "fruit", "carrot" => "vegetable"}.keys == ["apple", "carrot"]
JConsole is an easy way to monitor a running Java application or you can use a Profiler to get more detailed information on your application. I like using the NetBeans Profiler for this.
This is a great solution! With a few additional CSS rules you can format it just like an MS Word outline list with a hanging first line indent:
OL {
counter-reset: item;
}
LI {
display: block;
}
LI:before {
content: counters(item, ".") ".";
counter-increment: item;
padding-right:10px;
margin-left:-20px;
}
You could do something like this:
$("span, p").each(function() {
var text = $(this).text();
text = text.replace("lollypops", "marshmellows");
$(this).text(text);
});
It will be better to mark all tags with text that needs to be examined with a suitable class name.
Also, this may have performance issues. jQuery or javascript in general aren't really suitable for this kind of operations. You are better off doing it server side.
If you are trying to update your Anaconda version to a new one, you'll notice that running the new installer wouldn't work, as it complains the installation directory is non-empty.
So you should use conda to upgrade as detailed by the official docs:
conda update conda
conda update anaconda
This prevents the error:
ERROR conda.core.link:_execute(502): An error occurred while uninstalling package 'defaults::conda-4.5.4-py36_0'. PermissionError(13, 'Access is denied')
CXXFLAGS = -O3 -o prog -rdynamic -D_GNU_SOURCE -L./libmine
LIBS = libmine.a -lpthread
Look at this code, it can help you to get out of the loop fast!
foreach (var name in parent.names)
{
if (name.lastname == null)
{
Violated = true;
this.message = "lastname reqd";
break;
}
else if (name.firstname == null)
{
Violated = true;
this.message = "firstname reqd";
break;
}
}
There is no one-to-one correlation. For a really good article please see Efficient String Concatenation in Python:
Building long strings in the Python progamming language can sometimes result in very slow running code. In this article I investigate the computational performance of various string concatenation methods.
The shared pointer manages both the object itself, and a small object containing the reference count and other housekeeping data. make_shared
can allocate a single block of memory to hold both of these; constructing a shared pointer from a pointer to an already-allocated object will need to allocate a second block to store the reference count.
As well as this efficiency, using make_shared
means that you don't need to deal with new
and raw pointers at all, giving better exception safety - there is no possibility of throwing an exception after allocating the object but before assigning it to the smart pointer.
Assuming that your combobox isn't databound you would need to find the object's index in the "items" collection on your form and then set the "selectedindex" property to the appropriate index.
comboBox1.SelectedIndex = comboBox1.Items.IndexOf("test1");
Keep in mind that the IndexOf function may throw an argumentexception if the item isn't found.
Because the storage space wasn't stomped on just yet. Don't count on that behavior.
Use android:divider="#FF0000"
and android:dividerHeight="2px"
for ListView.
<ListView
android:id="@android:id/list"
android:layout_width="fill_parent"
android:layout_height="fill_parent"
android:divider="#0099FF"
android:dividerHeight="2px"/>
1 - You can script sshpass's ssh
command like this:
#!/bin/bash
export SSHPASS=password
sshpass -e ssh -oBatchMode=no user@host
2 - You can script sshpass
's sftp
commandlike this:
#!/bin/bash
export SSHPASS=password
sshpass -e sftp -oBatchMode=no -b - user@host << !
put someFile
get anotherFile
bye
!
Can use it in the way like this:
//! Define:
#define F_NUM 3
int (*pFunctions[F_NUM])(void * arg);
//! Initialise:
int someFunction(void * arg) {
int a= *((int*)arg);
return a*a;
}
pFunctions[0]= someFunction;
//! Use:
int someMethod(int idx, void * arg, int * result) {
int done= 0;
if (idx < F_NUM && pFunctions[idx] != NULL) {
*result= pFunctions[idx](arg);
done= 1;
}
return done;
}
int x= 2;
int z= 0;
someMethod(0, (void*)&x, &z);
assert(z == 4);
after encountering the same issue, I ended up on this thread. For future generation's sake: The current up-most voted answer, attempts to bind "this" to a variable in order to avoid changing the context when invoking the function which is defined in the setTimeout.
An alternate and more recommended approach(using Vue.JS 2.2 & ES6) is to use an arrow function in order to bind the context to the parent (Basically "addToBasket"'s "this" and the "setTimeout"'s "this" would still refer to the same object):
addToBasket: function(){
item = this.photo;
this.$http.post('/api/buy/addToBasket', item);
this.basketAddSuccess = true;
setTimeout(() => {
this.basketAddSuccess = false;
}, 2000);
}
SELECT COLUMN_NAME, TABLE_NAME,table_schema
FROM INFORMATION_SCHEMA.COLUMNS;
Your compiler just tried to compile the file named foo.cc
. Upon hitting line number line
, the compiler finds:
#include "bar"
or
#include <bar>
The compiler then tries to find that file. For this, it uses a set of directories to look into, but within this set, there is no file bar
. For an explanation of the difference between the versions of the include statement look here.
g++
has an option -I
. It lets you add include search paths to the command line. Imagine that your file bar
is in a folder named frobnicate
, relative to foo.cc
(assume you are compiling from the directory where foo.cc
is located):
g++ -Ifrobnicate foo.cc
You can add more include-paths; each you give is relative to the current directory. Microsoft's compiler has a correlating option /I
that works in the same way, or in Visual Studio, the folders can be set in the Property Pages of the Project, under Configuration Properties->C/C++->General->Additional Include Directories.
Now imagine you have multiple version of bar
in different folders, given:
// A/bar
#include<string>
std::string which() { return "A/bar"; }
// B/bar
#include<string>
std::string which() { return "B/bar"; }
// C/bar
#include<string>
std::string which() { return "C/bar"; }
// foo.cc
#include "bar"
#include <iostream>
int main () {
std::cout << which() << std::endl;
}
The priority with #include "bar"
is leftmost:
$ g++ -IA -IB -IC foo.cc
$ ./a.out
A/bar
As you see, when the compiler started looking through A/
, B/
and C/
, it stopped at the first or leftmost hit.
This is true of both forms, include <>
and incude ""
.
#include <bar>
and #include "bar"
Usually, the #include <xxx>
makes it look into system folders first, the #include "xxx"
makes it look into the current or custom folders first.
E.g.:
Imagine you have the following files in your project folder:
list
main.cc
with main.cc
:
#include "list"
....
For this, your compiler will #include
the file list
in your project folder, because it currently compiles main.cc
and there is that file list
in the current folder.
But with main.cc
:
#include <list>
....
and then g++ main.cc
, your compiler will look into the system folders first, and because <list>
is a standard header, it will #include
the file named list
that comes with your C++ platform as part of the standard library.
This is all a bit simplified, but should give you the basic idea.
<>
/""
-priorities and -I
According to the gcc-documentation, the priority for include <>
is, on a "normal Unix system", as follows:
/usr/local/include
libdir/gcc/target/version/include
/usr/target/include
/usr/include
For C++ programs, it will also look in /usr/include/c++/version, first. In the above, target is the canonical name of the system GCC was configured to compile code for; [...].
The documentation also states:
You can add to this list with the -Idir command line option. All the directories named by -I are searched, in left-to-right order, before the default directories. The only exception is when dir is already searched by default. In this case, the option is ignored and the search order for system directories remains unchanged.
To continue our #include<list> / #include"list"
example (same code):
g++ -I. main.cc
and
#include<list>
int main () { std::list<int> l; }
and indeed, the -I.
prioritizes the folder .
over the system includes and we get a compiler error.
One way to get around this is to use implicit casting:
bool DoesEntityExist<T>(T entity, Guid guid, ITransaction transaction) where T : IGloballyIdentifiable;
calling it like so:
DoesEntityExist(entity, entityGuid, transaction);
Going a step further, you can turn it into an extension method (it will need to be declared in a static class):
static bool DoesEntityExist<T>(this T entity, Guid guid, ITransaction transaction) where T : IGloballyIdentifiable;
calling as so:
entity.DoesEntityExist(entityGuid, transaction);
The information schema views and pg_typeof() return incomplete type information. Of these answers, psql
gives the most precise type information. (The OP might not need such precise information, but should know the limitations.)
create domain test_domain as varchar(15);
create table test (
test_id test_domain,
test_vc varchar(15),
test_n numeric(15, 3),
big_n bigint,
ip_addr inet
);
Using psql
and \d public.test
correctly shows the use of the data type test_domain
, the length of varchar(n) columns, and the precision and scale of numeric(p, s) columns.
sandbox=# \d public.test Table "public.test" Column | Type | Modifiers ---------+-----------------------+----------- test_id | test_domain | test_vc | character varying(15) | test_n | numeric(15,3) | big_n | bigint | ip_addr | inet |
This query against an information_schema view does not show the use of test_domain
at all. It also doesn't report the details of varchar(n) and numeric(p, s) columns.
select column_name, data_type
from information_schema.columns
where table_catalog = 'sandbox'
and table_schema = 'public'
and table_name = 'test';
column_name | data_type -------------+------------------- test_id | character varying test_vc | character varying test_n | numeric big_n | bigint ip_addr | inet
You might be able to get all that information by joining other information_schema views, or by querying the system tables directly. psql -E
might help with that.
The function pg_typeof()
correctly shows the use of test_domain
, but doesn't report the details of varchar(n) and numeric(p, s) columns.
select pg_typeof(test_id) as test_id,
pg_typeof(test_vc) as test_vc,
pg_typeof(test_n) as test_n,
pg_typeof(big_n) as big_n,
pg_typeof(ip_addr) as ip_addr
from test;
test_id | test_vc | test_n | big_n | ip_addr -------------+-------------------+---------+--------+--------- test_domain | character varying | numeric | bigint | inet
When the browser puts something in its cache, it also stores the Last-Modified
or ETag
header from the server.
The browser then sends a request with the If-Modified-Since
or If-None-Match
header, telling the server to send a 304 if the content still has that date or ETag.
The server needs some way of calculating a date-modified or ETag for each version of each resource; this typically comes from the filesystem or a separate database column.
for some reason ( I am a py newbie ... ) the -m call did not work ...
so here is a bash wrapper func ...
# ---------------------------------------------------------
# check the python synax for all the *.py files under the
# <<product_version_dir/sfw/python
# ---------------------------------------------------------
doCheckPythonSyntax(){
doLog "DEBUG START doCheckPythonSyntax"
test -z "$sleep_interval" || sleep "$sleep_interval"
cd $product_version_dir/sfw/python
# python3 -m compileall "$product_version_dir/sfw/python"
# foreach *.py file ...
while read -r f ; do \
py_name_ext=$(basename $f)
py_name=${py_name_ext%.*}
doLog "python3 -c \"import $py_name\""
# doLog "python3 -m py_compile $f"
python3 -c "import $py_name"
# python3 -m py_compile "$f"
test $! -ne 0 && sleep 5
done < <(find "$product_version_dir/sfw/python" -type f -name "*.py")
doLog "DEBUG STOP doCheckPythonSyntax"
}
# eof func doCheckPythonSyntax
Following are few options available to change Heap Size.
-Xms<size> set initial Java heap size
-Xmx<size> set maximum Java heap size
-Xss<size> set java thread stack size
java -Xmx256m TestData.java
On StackOverflow, pressing the up-vote button is AJAX whereas typing in your question or answer and seeing it appear in the real-time preview window below it is JavaScript (JQuery).
This means that the difference between AJAX and Javascript is that AJAX allows you to communicate with the server without doing a page refresh (i.e. going to a new page) whereas JavaScript (JQuery) allows you to embed logic and behaviour on your page. Of course, with this logic you create AJAX as well.
Just type emacs -nw
. This won't open an X window.
Do you really need to do that programmatically?
Just considering the title: You could use a ShapeDrawable as android:background…
For example, let's define res/drawable/my_custom_background.xml
as:
<shape xmlns:android="http://schemas.android.com/apk/res/android"
android:shape="rectangle">
<corners
android:radius="2dp"
android:topRightRadius="0dp"
android:bottomRightRadius="0dp"
android:bottomLeftRadius="0dp" />
<stroke
android:width="1dp"
android:color="@android:color/white" />
</shape>
and define android:background="@drawable/my_custom_background".
I've not tested but it should work.
Update:
I think that's better to leverage the xml shape drawable resource power if that fits your needs. With a "from scratch" project (for android-8), define res/layout/main.xml
<?xml version="1.0" encoding="utf-8"?>
<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
android:orientation="vertical"
android:layout_width="match_parent"
android:layout_height="match_parent"
android:background="@drawable/border"
android:padding="10dip" >
<TextView
android:layout_width="match_parent"
android:layout_height="wrap_content"
android:text="Hello World, SOnich"
/>
[... more TextView ...]
<TextView
android:layout_width="match_parent"
android:layout_height="wrap_content"
android:text="Hello World, SOnich"
/>
</LinearLayout>
and a res/drawable/border.xml
<?xml version="1.0" encoding="utf-8"?>
<shape xmlns:android="http://schemas.android.com/apk/res/android"
android:shape="rectangle">
<stroke
android:width="5dip"
android:color="@android:color/white" />
</shape>
Reported to work on a gingerbread device. Note that you'll need to relate android:padding
of the LinearLayout to the android:width
shape/stroke's value. Please, do not use @android:color/white
in your final application but rather a project defined color.
You could apply android:background="@drawable/border" android:padding="10dip"
to each of the LinearLayout from your provided sample.
As for your other posts related to display some circles as LinearLayout's background, I'm playing with Inset/Scale/Layer drawable resources (see Drawable Resources for further information) to get something working to display perfect circles in the background of a LinearLayout but failed at the moment…
Your problem resides clearly in the use of getBorder.set{Width,Height}(100);
. Why do you do that in an onClick method?
I need further information to not miss the point: why do you do that programmatically? Do you need a dynamic behavior? Your input drawables are png or ShapeDrawable is acceptable? etc.
To be continued (maybe tomorrow and as soon as you provide more precisions on what you want to achieve)…
Application.Sum often does not work well in my experience (or at least the VBA developer environment does not like it for whatever reason).
The function that works best for me is Excel.WorksheetFunction.Sum()
Example:
Dim Report As Worksheet 'Set up your new worksheet variable.
Set Report = Excel.ActiveSheet 'Assign the active sheet to the variable.
Report.Cells(11, 1).Value = Excel.WorksheetFunction.Sum(Report.Range("A1:A10")) 'Add the function result.
The other method which you were looking for I think is to place the function directly into the cell. This can be done by inputting the function string into the cell value. Here is an example that provides the same result as above, except the cell value is given the function and not the result of the function:
Dim Report As Worksheet 'Set up your new worksheet variable.
Set Report = Excel.ActiveSheet 'Assign the active sheet to the variable.
Report.Cells(11, 1).Value = "=Sum(A1:A10)" 'Add the function.
Change the wrapping from "onload
" to "No wrap - in <body>
"
The function defined has a different scope.
const a = [1, 2, 3]; // -> [2, 3]
// Mutable solutions: update array 'a', 'c' will contain the removed item
const c = a.shift(); // prefered mutable way
const [c] = a.splice(0, 1);
// Immutable solutions: create new array 'b' and leave array 'a' untouched
const b = a.slice(1); // prefered immutable way
const b = a.filter((_, i) => i > 0);
const [c, ...b] = a; // c: the removed item
Snippets:
HideNavigationBarComponent.java
This is for Android 4.4+
Try out immersive mode https://developer.android.com/training/system-ui/immersive.html
Fast snippet (for an Activity class):
private int currentApiVersion;
@Override
@SuppressLint("NewApi")
protected void onCreate(Bundle savedInstanceState)
{
super.onCreate(savedInstanceState);
currentApiVersion = android.os.Build.VERSION.SDK_INT;
final int flags = View.SYSTEM_UI_FLAG_LAYOUT_STABLE
| View.SYSTEM_UI_FLAG_LAYOUT_HIDE_NAVIGATION
| View.SYSTEM_UI_FLAG_LAYOUT_FULLSCREEN
| View.SYSTEM_UI_FLAG_HIDE_NAVIGATION
| View.SYSTEM_UI_FLAG_FULLSCREEN
| View.SYSTEM_UI_FLAG_IMMERSIVE_STICKY;
// This work only for android 4.4+
if(currentApiVersion >= Build.VERSION_CODES.KITKAT)
{
getWindow().getDecorView().setSystemUiVisibility(flags);
// Code below is to handle presses of Volume up or Volume down.
// Without this, after pressing volume buttons, the navigation bar will
// show up and won't hide
final View decorView = getWindow().getDecorView();
decorView
.setOnSystemUiVisibilityChangeListener(new View.OnSystemUiVisibilityChangeListener()
{
@Override
public void onSystemUiVisibilityChange(int visibility)
{
if((visibility & View.SYSTEM_UI_FLAG_FULLSCREEN) == 0)
{
decorView.setSystemUiVisibility(flags);
}
}
});
}
}
@SuppressLint("NewApi")
@Override
public void onWindowFocusChanged(boolean hasFocus)
{
super.onWindowFocusChanged(hasFocus);
if(currentApiVersion >= Build.VERSION_CODES.KITKAT && hasFocus)
{
getWindow().getDecorView().setSystemUiVisibility(
View.SYSTEM_UI_FLAG_LAYOUT_STABLE
| View.SYSTEM_UI_FLAG_LAYOUT_HIDE_NAVIGATION
| View.SYSTEM_UI_FLAG_LAYOUT_FULLSCREEN
| View.SYSTEM_UI_FLAG_HIDE_NAVIGATION
| View.SYSTEM_UI_FLAG_FULLSCREEN
| View.SYSTEM_UI_FLAG_IMMERSIVE_STICKY);
}
}
If you have problems when you press Volume up or Volume down that your navigation bar show. I added code in onCreate
see setOnSystemUiVisibilityChangeListener
Here is another related question:
Immersive mode navigation becomes sticky after volume press or minimise-restore
you can access the children of a vuejs component with this.$children
. if you want to use the query selector on the current component instance then this.$el.querySelector(...)
just doing a simple console.log(this)
will show you all the properties of a vue component instance.
additionally if you know the element you want to access in your component, you can add the v-el:uniquename
directive to it and access it via this.$els.uniquename
Be careful, the solution proposed with $a = array_combine($a, $a);
will not work for numeric values.
I for example wanted to have a memory array(128,256,512,1024,2048,4096,8192,16384)
to be the keys as well as the values however PHP manual states:
If the input arrays have the same string keys, then the later value for that key will overwrite the previous one. If, however, the arrays contain numeric keys, the later value will not overwrite the original value, but will be appended.
So I solved it like this:
foreach($array as $key => $val) {
$new_array[$val]=$val;
}
Here I think it's worth mentioning SORT BY
and ORDER BY
both clauses and why they different,
SELECT * FROM <table_name> SORT BY <column_name> DESC LIMIT 2
If you are using SORT BY
clause it sort data per reducer which means if you have more than one MapReduce task it will result partially ordered data. On the other hand, the ORDER BY
clause will result in ordered data for the final Reduce task. To understand more please refer to this link.
SELECT * FROM <table_name> ORDER BY <column_name> DESC LIMIT 2
Note: Finally, Even though the accepted answer contains SORT BY
clause, I mostly prefer to use ORDER BY
clause for the general use case to avoid any data loss.
To rename the package name in Android studio, Click on the setting icon in the project section and untick the Compact empty Middle Packages, after that the package will split into multiple folder names, then right click on the folder you need to change the name, click on refactor-> Rename-> Type the name you want to change in -> Refactor -> Refactor Directory, then import R.java file in the whole project. Working for me.
JDBC uses a so-called "connection URL", so you can escape "+" by "%2B", that is
useTimezone=true&serverTimezone=GMT%2B8
CSS Modules let you use the same CSS class name in different files without worrying about naming clashes.
Button.module.css
.error {
background-color: red;
}
another-stylesheet.css
.error {
color: red;
}
Button.js
import React, { Component } from 'react';
import styles from './Button.module.css'; // Import css modules stylesheet as styles
import './another-stylesheet.css'; // Import regular stylesheet
class Button extends Component {
render() {
// reference as a js object
return <button className={styles.error}>Error Button</button>;
}
}
Since I don't believe "Please use..." plus some random code that is unrelated to the question
is a good answer, but I do believe the spirit was correct, I decided to answer this correctly.
When you are using Sql Bulk Copy, it attempts to align your input data directly with the data on the server. So, it takes the Server Table and performs a SQL statement similar to this:
INSERT INTO [schema].[table] (col1, col2, col3) VALUES
Therefore, if you give it Columns 1, 3, and 2, EVEN THOUGH your names may match (e.g.: col1, col3, col2). It will insert like so:
INSERT INTO [schema].[table] (col1, col2, col3) VALUES
('col1', 'col3', 'col2')
It would be extra work and overhead for the Sql Bulk Insert to have to determine a Column Mapping. So it instead allows you to choose... Either ensure your Code and your SQL Table columns are in the same order, or explicitly state to align by Column Name.
Therefore, if your issue is mis-alignment of the columns, which is probably the majority of the cause of this error, this answer is for you.
using System.Data;
//...
myDataTable.Columns.Cast<DataColumn>().ToList().ForEach(x =>
bulkCopy.ColumnMappings.Add(new SqlBulkCopyColumnMapping(x.ColumnName, x.ColumnName)));
This will take your existing DataTable, which you are attempt to insert into your created BulkCopy object, and it will just explicitly map name to name. Of course if, for some reason, you decided to name your DataTable Columns differently than your SQL Server Columns... that's on you.
In MacOS Cmd+C is useful to minimizing the full screen
<?php
session_start();
echo "<h3> PHP List All Session Variables</h3>";
foreach ($_SESSION as $key=>$val)
echo $key." ".$val."<br/>";
?>
async-await
syntax works perfectly for something like the following...
changeStateFunction = () => {
// Some Worker..
this.setState((prevState) => ({
year: funcHandleYear(),
month: funcHandleMonth()
}));
goNextMonth = async () => {
await this.changeStateFunction();
const history = createBrowserHistory();
history.push(`/calendar?year=${this.state.year}&month=${this.state.month}`);
}
goPrevMonth = async () => {
await this.changeStateFunction();
const history = createBrowserHistory();
history.push(`/calendar?year=${this.state.year}&month=${this.state.month}`);
}
Problem is you are doing the following
str(chr(char + 7429146))
where char is a string. You cannot add a int with a string. this will cause that error
maybe if you want to get the ascii code and add it with a constant number. if so , you can just do ord(char) and add it to a number. but again, chr can take values between 0 and 1114112
If you don't care about IE =6, you could use pure CSS ...
.forum:hover { background-color: #380606; }
.forum { color: white; }_x000D_
.forum:hover { background-color: #380606 !important; }_x000D_
/* we use !important here to override specificity. see http://stackoverflow.com/q/5805040/ */_x000D_
_x000D_
#blue { background-color: blue; }
_x000D_
<meta charset=utf-8>_x000D_
_x000D_
<p class="forum" style="background-color:red;">Red</p>_x000D_
<p class="forum" style="background:green;">Green</p>_x000D_
<p class="forum" id="blue">Blue</p>
_x000D_
With jQuery, usually it is better to create a specific class for this style:
.forum_hover { background-color: #380606; }
and then apply the class on mouseover, and remove it on mouseout.
$('.forum').hover(function(){$(this).toggleClass('forum_hover');});
$(document).ready(function(){_x000D_
$('.forum').hover(function(){$(this).toggleClass('forum_hover');});_x000D_
});
_x000D_
.forum_hover { background-color: #380606 !important; }_x000D_
_x000D_
.forum { color: white; }_x000D_
#blue { background-color: blue; }
_x000D_
<meta charset=utf-8>_x000D_
<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>_x000D_
_x000D_
<p class="forum" style="background-color:red;">Red</p>_x000D_
<p class="forum" style="background:green;">Green</p>_x000D_
<p class="forum" id="blue">Blue</p>
_x000D_
If you must not modify the class, you could save the original background color in .data()
:
$('.forum').data('bgcolor', '#380606').hover(function(){
var $this = $(this);
var newBgc = $this.data('bgcolor');
$this.data('bgcolor', $this.css('background-color')).css('background-color', newBgc);
});
$(document).ready(function(){_x000D_
$('.forum').data('bgcolor', '#380606').hover(function(){_x000D_
var $this = $(this);_x000D_
var newBgc = $this.data('bgcolor');_x000D_
$this.data('bgcolor', $this.css('background-color')).css('background-color', newBgc);_x000D_
});_x000D_
});
_x000D_
.forum { color: white; }_x000D_
#blue { background-color: blue; }
_x000D_
<meta charset=utf-8>_x000D_
<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>_x000D_
_x000D_
<p class="forum" style="background-color:red;">Red</p>_x000D_
<p class="forum" style="background:green;">Green</p>_x000D_
<p class="forum" id="blue">Blue</p>
_x000D_
or
$('.forum').hover(
function(){
var $this = $(this);
$this.data('bgcolor', $this.css('background-color')).css('background-color', '#380606');
},
function(){
var $this = $(this);
$this.css('background-color', $this.data('bgcolor'));
}
);
$(document).ready(function(){_x000D_
$('.forum').hover(_x000D_
function(){_x000D_
var $this = $(this);_x000D_
$this.data('bgcolor', $this.css('background-color')).css('background-color', '#380606');_x000D_
},_x000D_
function(){_x000D_
var $this = $(this);_x000D_
$this.css('background-color', $this.data('bgcolor'));_x000D_
}_x000D_
); _x000D_
});
_x000D_
.forum { color: white; }_x000D_
#blue { background-color: blue; }
_x000D_
<meta charset=utf-8>_x000D_
<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>_x000D_
_x000D_
<p class="forum" style="background-color:red;">Red</p>_x000D_
<p class="forum" style="background:green;">Green</p>_x000D_
<p class="forum" id="blue">Blue</p>
_x000D_
Use Invoke-RestMethod
to consume REST-APIs. Save the JSON to a string and use that as the body, ex:
$JSON = @'
{"@type":"login",
"username":"[email protected]",
"password":"yyy"
}
'@
$response = Invoke-RestMethod -Uri "http://somesite.com/oneendpoint" -Method Post -Body $JSON -ContentType "application/json"
If you use Powershell 3, I know there have been some issues with Invoke-RestMethod
, but you should be able to use Invoke-WebRequest
as a replacement:
$response = Invoke-WebRequest -Uri "http://somesite.com/oneendpoint" -Method Post -Body $JSON -ContentType "application/json"
If you don't want to write your own JSON every time, you can use a hashtable and use PowerShell to convert it to JSON before posting it. Ex.
$JSON = @{
"@type" = "login"
"username" = "[email protected]"
"password" = "yyy"
} | ConvertTo-Json
Updated for Swift 3
yourButtonName.imageEdgeInsets = UIEdgeInsetsMake(10, 10, 10, 10)
You should not set ENV variables in package.json
. actionhero uses NODE_ENV
to allow you to change configuration options which are loaded from the files in ./config
. Check out the redis config file, and see how NODE_ENV is uses to change database options in NODE_ENV=test
If you want to use other ENV variables to set things (perhaps the HTTP port), you still don't need to change anything in package.json
. For example, if you set PORT=1234
in ENV and want to use that as the HTTP port in NODE_ENV=production
, just reference that in the relevant config file, IE:
# in config/servers/web.js
exports.production = {
servers: {
web: function(api){
return {
port: process.env.PORT
}
}
}
}
Would this work for you? I've tested it in Excel 2010 and it works fine. This is working with a table called "Table1" that uses columns A through G.
Sub Clear_Table()
Range("Table1").Select
Application.DisplayAlerts = False
Selection.Delete
Application.DisplayAlerts = True
Range("A1:G1").Select
Selection.ClearContents
End Sub
Here is a solution using python with a generator expression. Tested with a million numbers on my old cruddy laptop.
time python -c "import sys; print sum((float(l) for l in sys.stdin))" < file
real 0m0.619s
user 0m0.512s
sys 0m0.028s
LocalDateTime.now().truncatedTo(ChronoUnit.MICROS)
You may want to use statement_timestamp(). This give the timestamp when the statement was executed. Whereas NOW()
and CURRENT_TIMESTAMP
give the timestamp when the transaction started.
More details in the manual
Best way to do this is to use a function:
<div ng-repeat="product in products | filter: myFilter">
$scope.myFilter = function (item) {
return item === 'red' || item === 'blue';
};
Alternatively, you can use ngHide or ngShow to dynamically show and hide elements based on a certain criteria.
#this is a function for a square matrix so on the while loop rows does not have to be less than cols.
#you can make your own condition. But if you want your a square matrix, use this code.
import random
import numpy as np
def random_matrix(R, cols):
matrix = []
rows = 0
while rows < cols:
N = random.sample(R, cols)
matrix.append(N)
rows = rows + 1
return np.array(matrix)
print(random_matrix(range(10), 5))
#make sure you understand the function random.sample
create or replace procedure point_triangle
AS
BEGIN
FOR thisteam in (select FIRSTNAME,LASTNAME,SUM(PTS) from PLAYERREGULARSEASON where TEAM = 'IND' group by FIRSTNAME, LASTNAME order by SUM(PTS) DESC)
LOOP
dbms_output.put_line(thisteam.FIRSTNAME|| ' ' || thisteam.LASTNAME || ':' || thisteam.PTS);
END LOOP;
END;
/
Sharding does more than just horizontal partitioning. According to the wikipedia article,
Horizontal partitioning splits one or more tables by row, usually within a single instance of a schema and a database server. It may offer an advantage by reducing index size (and thus search effort) provided that there is some obvious, robust, implicit way to identify in which partition a particular row will be found, without first needing to search the index, e.g., the classic example of the 'CustomersEast' and 'CustomersWest' tables, where their zip code already indicates where they will be found.
Sharding goes beyond this: it partitions the problematic table(s) in the same way, but it does this across potentially multiple instances of the schema. The obvious advantage would be that search load for the large partitioned table can now be split across multiple servers (logical or physical), not just multiple indexes on the same logical server.
Also,
Splitting shards across multiple isolated instances requires more than simple horizontal partitioning. The hoped-for gains in efficiency would be lost, if querying the database required both instances to be queried, just to retrieve a simple dimension table. Beyond partitioning, sharding thus splits large partitionable tables across the servers, while smaller tables are replicated as complete units
You could consider only appending internal
to your url if it is true, then if the checkbox isn't checked and you don't append it params[:internal]
would be nil
, which evaluates to false in Ruby.
I'm not that familiar with the specific jQuery you're using, but is there a cleaner way to call what you want than manually building a URL string? Have you had a look at $get
and $ajax
?
Consider you've created a procedure like below.
CREATE OR REPLACE PROCEDURE GET_FULL_NAME like
(
FIRST_NAME IN VARCHAR2,
LAST_NAME IN VARCHAR2,
FULL_NAME OUT VARCHAR2
) IS
BEGIN
FULL_NAME:= FIRST_NAME || ' ' || LAST_NAME;
END GET_FULL_NAME;
In Oracle SQL Developer, you can run this procedure in two ways.
1. Using SQL Worksheet
Create a SQL Worksheet and write PL/SQL anonymous block like this and hit f5
DECLARE
FULL_NAME Varchar2(50);
BEGIN
GET_FULL_NAME('Foo', 'Bar', FULL_NAME);
Dbms_Output.Put_Line('Full name is: ' || FULL_NAME);
END;
2. Using GUI Controls
Expand Procedures
Right click on the procudure you've created and Click Run
In the pop-up window, Fill the parameters and Click OK.
Cheers!
You can do it like this in Lodash 4.x
var data = [{_x000D_
"name": "jim",_x000D_
"color": "blue",_x000D_
"age": "22"_x000D_
}, {_x000D_
"name": "Sam",_x000D_
"color": "blue",_x000D_
"age": "33"_x000D_
}, {_x000D_
"name": "eddie",_x000D_
"color": "green",_x000D_
"age": "77"_x000D_
}];_x000D_
_x000D_
console.log(_x000D_
_.chain(data)_x000D_
// Group the elements of Array based on `color` property_x000D_
.groupBy("color")_x000D_
// `key` is group's name (color), `value` is the array of objects_x000D_
.map((value, key) => ({ color: key, users: value }))_x000D_
.value()_x000D_
);
_x000D_
<script src="https://cdnjs.cloudflare.com/ajax/libs/lodash.js/4.17.15/lodash.min.js"></script>
_x000D_
Original Answer
var result = _.chain(data)
.groupBy("color")
.pairs()
.map(function(currentItem) {
return _.object(_.zip(["color", "users"], currentItem));
})
.value();
console.log(result);
Note: Lodash 4.0 onwards, the .pairs
function has been renamed to _.toPairs()
Just execute
sudo npm i --save
That's all
if you use ubuntu 16.04 (maybe and above) just do this
sudo phpenmod mysqli
sudo service php7.0-fpm restart
Seems to be identical just in case that SQL server will not try to read data which is not required for the query, the optimizer is clever enough
It can have sense when join on complex query (i.e which have joings, groupings etc itself) then, yes, it is better to specify required fields.
But there is one more point. If the query is simple there is no difference but EVERY extra action even which is supposed to improve performance makes optimizer works harder and optimizer can fail to get the best plan in time and will run not optimal query. So extras select can be a such action which can even decrease performance
Very old thread but a simpler take :)
Sub firstBlank(c) 'as letter
MsgBox (c & Split(Range(c & ":" & c).Find("", LookIn:=xlValues).address, "$")(2))
End Sub
Sub firstBlank(c) 'as number
cLet = Split(Cells(1, c).address, "$")(1)
MsgBox (cLet & Split(Range(cLet & ":" & cLet).Find("", LookIn:=xlValues).address, "$")(2))
End Sub
Ripping off Luc's comment here, but to return a blank response, like a 201
the simplest option is to use the following return in your route.
return "", 201
So for example:
@app.route('/database', methods=["PUT"])
def database():
update_database(request)
return "", 201
Add the path to where your new library is to LD_LIBRARY_PATH
(it has slightly different name on Mac ...)
Your solution should work with using the -L/my/dir -lfoo
options, at runtime use LD_LIBRARY_PATH to point to the location of your library.
Careful with using LD_LIBRARY_PATH - in short (from link):
..implications..:
Security: Remember that the directories specified in LD_LIBRARY_PATH get searched before(!) the standard locations? In that way, a nasty person could get your application to load a version of a shared library that contains malicious code! That’s one reason why setuid/setgid executables do neglect that variable!
Performance: The link loader has to search all the directories specified, until it finds the directory where the shared library resides – for ALL shared libraries the application is linked against! This means a lot of system calls to open(), that will fail with “ENOENT (No such file or directory)”! If the path contains many directories, the number of failed calls will increase linearly, and you can tell that from the start-up time of the application. If some (or all) of the directories are in an NFS environment, the start-up time of your applications can really get long – and it can slow down the whole system!
Inconsistency: This is the most common problem. LD_LIBRARY_PATH forces an application to load a shared library it wasn’t linked against, and that is quite likely not compatible with the original version. This can either be very obvious, i.e. the application crashes, or it can lead to wrong results, if the picked up library not quite does what the original version would have done. Especially the latter is sometimes hard to debug.
OR
Use the rpath option via gcc to linker - runtime library search path, will be used instead of looking in standard dir (gcc option):
-Wl,-rpath,$(DEFAULT_LIB_INSTALL_PATH)
This is good for a temporary solution. Linker first searches the LD_LIBRARY_PATH for libraries before looking into standard directories.
If you don't want to permanently update LD_LIBRARY_PATH you can do it on the fly on command line:
LD_LIBRARY_PATH=/some/custom/dir ./fooo
You can check what libraries linker knows about using (example):
/sbin/ldconfig -p | grep libpthread
libpthread.so.0 (libc6, OS ABI: Linux 2.6.4) => /lib/libpthread.so.0
And you can check which library your application is using:
ldd foo
linux-gate.so.1 => (0xffffe000)
libpthread.so.0 => /lib/libpthread.so.0 (0xb7f9e000)
libxml2.so.2 => /usr/lib/libxml2.so.2 (0xb7e6e000)
librt.so.1 => /lib/librt.so.1 (0xb7e65000)
libm.so.6 => /lib/libm.so.6 (0xb7d5b000)
libc.so.6 => /lib/libc.so.6 (0xb7c2e000)
/lib/ld-linux.so.2 (0xb7fc7000)
libdl.so.2 => /lib/libdl.so.2 (0xb7c2a000)
libz.so.1 => /lib/libz.so.1 (0xb7c18000)
Therefore, before starting '$ sqlplus' on OS, run the followings:
On Windows
set NLS_LANG=AMERICAN_AMERICA.UTF8
On Unix (Solaris and Linux, centos etc)
export NLS_LANG=AMERICAN_AMERICA.UTF8
It would also be advisable to set env variable in your '.bash_profile' [on start up script]
This is the place where other ORACLE env variables (ORACLE_SID, ORACLE_HOME) are usually set.
just fyi - SQL Developer is good at displaying/handling non-English UTF8 characters.
As your data already in varchar, you have to convert it into date first:
select convert(varchar(10), cast(ts as date), 101) from <your table>
Just add below lines in your POJO before start of class ,and your issue is resolved. @Produces("application/json") @XmlRootElement See example import javax.ws.rs.Produces; import javax.xml.bind.annotation.XmlRootElement;
/**
* @author manoj.kumar
* @email [email protected]
*/
@Produces("application/json")
@XmlRootElement
public class User {
private String username;
private String password;
private String email;
public String getUsername() {
return username;
}
public void setUsername(String username) {
this.username = username;
}
public String getPassword() {
return password;
}
public void setPassword(String password) {
this.password = password;
}
public String getEmail() {
return email;
}
public void setEmail(String email) {
this.email = email;
}
}
add below lines inside of your web.xml
<init-param>
<param-name>com.sun.jersey.api.json.POJOMappingFeature</param-name>
<param-value>true</param-value>
</init-param>
Now recompile your webservice everything would work!!!
If you want to load a test resource file as a string with just few lines of code and without any extra dependencies, this does the trick:
public String loadResourceAsString(String fileName) throws IOException {
Scanner scanner = new Scanner(getClass().getClassLoader().getResourceAsStream(fileName));
String contents = scanner.useDelimiter("\\A").next();
scanner.close();
return contents;
}
"\\A" matches the start of input and there's only ever one. So this parses the entire file contents and returns it as a string. Best of all, it doesn't require any 3rd party libraries (like IOUTils).
If you already have the figure object use:
f.set_figheight(15)
f.set_figwidth(15)
But if you use the .subplots() command (as in the examples you're showing) to create a new figure you can also use:
f, axs = plt.subplots(2,2,figsize=(15,15))
You can get this in 2 way using moment and also using Javascript
const date = moment("2015-07-02"); // Thursday Feb 2015_x000D_
const usingMoment_1 = date.day();_x000D_
const usingMoment_2 = date.isoWeekday();_x000D_
_x000D_
console.log('usingMoment: date.day() ==> ',usingMoment_1);_x000D_
console.log('usingMoment: date.isoWeekday() ==> ',usingMoment_2);_x000D_
_x000D_
_x000D_
const usingJS= new Date("2015-07-02").getDay();_x000D_
console.log('usingJavaSript: new Date("2015-07-02").getDay() ===> ',usingJS);
_x000D_
<script src="https://cdnjs.cloudflare.com/ajax/libs/moment.js/2.24.0/moment.min.js"></script>
_x000D_
Do not inject javascript. That is a bad practice.
I would model the DatePicker as an element like textbox / select as shown below.
For the detailed answer - check here- http://www.testautomationguru.com/selenium-webdriver-automating-custom-controls-datepicker/
public class DatePicker {
private static final String dateFormat = "dd MMM yyyy";
@FindBy(css = "a.ui-datepicker-prev")
private WebElement prev;
@FindBy(css = "a.ui-datepicker-next")
private WebElement next;
@FindBy(css = "div.ui-datepicker-title")
private WebElement curDate;
@FindBy(css = "a.ui-state-default")
private List < WebElement > dates;
public void setDate(String date) {
long diff = this.getDateDifferenceInMonths(date);
int day = this.getDay(date);
WebElement arrow = diff >= 0 ? next : prev;
diff = Math.abs(diff);
//click the arrows
for (int i = 0; i < diff; i++)
arrow.click();
//select the date
dates.stream()
.filter(ele - > Integer.parseInt(ele.getText()) == day)
.findFirst()
.ifPresent(ele - > ele.click());
}
private int getDay(String date) {
DateTimeFormatter dtf = DateTimeFormatter.ofPattern(dateFormat);
LocalDate dpToDate = LocalDate.parse(date, dtf);
return dpToDate.getDayOfMonth();
}
private long getDateDifferenceInMonths(String date) {
DateTimeFormatter dtf = DateTimeFormatter.ofPattern(dateFormat);
LocalDate dpCurDate = LocalDate.parse("01 " + this.getCurrentMonthFromDatePicker(), dtf);
LocalDate dpToDate = LocalDate.parse(date, dtf);
return YearMonth.from(dpCurDate).until(dpToDate, ChronoUnit.MONTHS);
}
private String getCurrentMonthFromDatePicker() {
return this.curDate.getText();
}
}
United Nations list of locations in mdb, csv or txt:
Welcome: http://www.unece.org/cefact/locode/welcome.html
Choose the downloads link from the above link or just click here.
You could also use the RANK function
=RANK(C2,$C$2:$C$7,0)
It would return data like your example:
| A | B | C
1 | name | position | points
2 | person1 | 1 | 10
3 | person2 | 2 | 9
4 | person3 | 2 | 9
5 | person4 | 2 | 9
6 | person5 | 5 | 8
7 | person6 | 6 | 7
The 'Points' column needs to be sorted into descending order.
SIMPLE ANSWER HERE
\begin{equation}
\begin{split}
equation \\
here
\end{split}
\end{equation}
$total_ratings
is an array.
This is an old question, but it has no chosen answer, and I just solved this problem myself. Here's my solution:
Make sure you are set up to work with your Google API in the first place. See Google's list of prerequisites. I was working with Google My Business, so I also went through it's Get Started process.
In the OAuth 2.0 playground, Step 1 requires you to select which API you want to authenticate. Select or input as applicable for your case (in my case for Google My Business, I had to input https://www.googleapis.com/auth/plus.business.manage into the "Input your own scopes" input field). Note: this is the same as what's described in step 6 of the "Make a simple HTTP request" section of the Get Started guide.
Assuming successful authentication, you should get an "Access token" returned in the "Step 1's result" step in the OAuth playground. Copy this token to your clipboard.
Open Postman and open whichever collection you want as necessary.
In Postman, make sure "GET" is selected as the request type, and click on the "Authorization" tab below the request type drop-down.
In the Authorization "TYPE" dropdown menu, select "Bearer Token"
Paste your previously copied "Access Token" which you copied from the OAuth playground into the "Token" field which displays in Postman.
Almost there! To test if things work, put https://mybusiness.googleapis.com/v4/accounts/ into the main URL input bar in Postman and click the send button. You should get a JSON list of accounts back in the response that looks something like the following:
{
"accounts": [
{
"name": "accounts/REDACTED",
"accountName": "REDACTED",
"type": "PERSONAL",
"state": {
"status": "UNVERIFIED"
}
},
{
"name": "accounts/REDACTED",
"accountName": "REDACTED",
"type": "LOCATION_GROUP",
"role": "OWNER",
"state": {
"status": "UNVERIFIED"
},
"permissionLevel": "OWNER_LEVEL"
}
]
}
Here's another way, but with the advantage that it launches Terminal, brings it to the front, and creates only one window.
I like this when I want to be neatly presented with the results of my script.
tell application "Terminal"
activate
set shell to do script "echo 1" in window 1
do script "echo 2" in shell
do script "echo 3" in shell
end tell
if you want to submit two forms with one button you need to do this:
1- use setTimeout()
2- allow show pop up
<script>
function myFunction() {
setTimeout(function(){ document.getElementById("form1").submit();}, 3000);
setTimeout(function(){ document.getElementById("form2").submit();}, 6000);
}
</script>
<form target="_blank" id="form1">
<input type="text">
<input type="submit">
</form>
<form target="_blank" id="form2">
<input type="text">
<input type="submit">
</form>
javascript doesn't submit two forms at the same time. we submit two forms with one button not at the same time but after secounds.
edit: when we use this code, browser doesn't allow pop up.
if you use this code for your software like me just set browser for show pop up but if you use it in designing site, browser is a barrier and code doesn't run.
There are two ways for case insensitive comparison:
===
). How strict operator treats operands read stuff at:
http://www.thesstech.com/javascript/relational-logical-operatorsUse the "search" string method for case insensitive search. Read about search and other string methods at: http://www.thesstech.com/pattern-matching-using-string-methods
<!doctype html>
<html>
<head>
<script>
// 1st way
var a = "apple";
var b = "APPLE";
if (a.toUpperCase() === b.toUpperCase()) {
alert("equal");
}
//2nd way
var a = " Null and void";
document.write(a.search(/null/i));
</script>
</head>
</html>
Since php 5.4 you can now do http_response_code(404);
You should follow the guidelines on Add a secondary horizontal axis:
To complete this procedure, you must have a chart that displays a secondary vertical axis. To add a secondary vertical axis, see Add a secondary vertical axis.
Click a chart that displays a secondary vertical axis. This displays the Chart Tools, adding the Design, Layout, and Format tabs.
On the Layout tab, in the Axes group, click Axes.
Click Secondary Horizontal Axis, and then click the display option that you want.
You can plot data on a secondary vertical axis one data series at a time. To plot more than one data series on the secondary vertical axis, repeat this procedure for each data series that you want to display on the secondary vertical axis.
In a chart, click the data series that you want to plot on a secondary vertical axis, or do the following to select the data series from a list of chart elements:
Click the chart.
This displays the Chart Tools, adding the Design, Layout, and Format tabs.
On the Format tab, in the Current Selection group, click the arrow in the Chart Elements box, and then click the data series that you want to plot along a secondary vertical axis.
On the Format tab, in the Current Selection group, click Format Selection. The Format Data Series dialog box is displayed.
Note: If a different dialog box is displayed, repeat step 1 and make sure that you select a data series in the chart.
On the Series Options tab, under Plot Series On, click Secondary Axis and then click Close.
A secondary vertical axis is displayed in the chart.
To change the display of the secondary vertical axis, do the following:
On the Layout tab, in the Axes group, click Axes.
Click Secondary Vertical Axis, and then click the display option that you want.
To change the axis options of the secondary vertical axis, do the following:
Right-click the secondary vertical axis, and then click Format Axis.
Under Axis Options, select the options that you want to use.
Here is an easy way.
Open the connection window, click on the Server name dropdown, and hover over the connection string you want to delete, then press delete.
Pls, check if DataGridComboBoxColumn xaml below would work for you:
<DataGridComboBoxColumn
SelectedValueBinding="{Binding CompanyID}"
DisplayMemberPath="Name"
SelectedValuePath="ID">
<DataGridComboBoxColumn.ElementStyle>
<Style TargetType="{x:Type ComboBox}">
<Setter Property="ItemsSource" Value="{Binding Path=DataContext.CompanyItems, RelativeSource={RelativeSource AncestorType={x:Type Window}}}" />
</Style>
</DataGridComboBoxColumn.ElementStyle>
<DataGridComboBoxColumn.EditingElementStyle>
<Style TargetType="{x:Type ComboBox}">
<Setter Property="ItemsSource" Value="{Binding Path=DataContext.CompanyItems, RelativeSource={RelativeSource AncestorType={x:Type Window}}}" />
</Style>
</DataGridComboBoxColumn.EditingElementStyle>
</DataGridComboBoxColumn>
Here you can find another solution for the problem you're facing: Using combo boxes with the WPF DataGrid
Another way to ensure you get the correct url regardless of server settings is to put the url into a hidden field on your page and reference it for the path:
<input type="hidden" id="GetIndexDataPath" value="@Url.Action("Index","Home")" />
Then you just get the value in your ajax call:
var path = $("#GetIndexDataPath").val();
$.ajax({
type: "GET",
url: path,
data: { id = e.value},
dataType: "html",
success : function (data) {
$('div#theNewView').html(data);
}
});
}
I have been using this for years to cope with server weirdness, as it always builds the correct url. It also makes keeping track of changing controller method calls a breeze if you put all the hidden fields together in one part of the html or make a separate razor partial to hold them.
try this one:
<table style="border:1px solid">
<tr>
<td style="min-width:50px">one</td>
<td style="min-width:100px">two</td>
</tr>
</table>
_x000D_
I faced the same problem due to illegal spaces in my entire code.
I fixed it by selecting one of these spaces and use find and replace
to replace all matches with regular spaces.
You were close. You can do:
var element = $("#parentDiv").find(".myClassNameOfInterest");
.find()
- http://api.jquery.com/findAlternatively, you can do:
var element = $(".myClassNameOfInterest", "#parentDiv");
...which sets the context of the jQuery object to the #parentDiv
.
EDIT:
Additionally, it may be faster in some browsers if you do div.myClassNameOfInterest
instead of just .myClassNameOfInterest
.
If you're using Matplotlib interactively, for example in a web application, (e.g. ipython) you maybe looking for
plt.show()
instead of plt.close()
or plt.clf()
.
inyour.css file:
*.icon-white {color: white}
*.icon-silver {color: silver}
inyour.html file:
<a><i class="icon-book icon-white"></i> Book</a>
<a><i class="icon-ok-sign icon-silver"></i> OK</a>
var test = parseInt($("#testid").val());
One possible solution is:
<h:panelGroup rendered="#{bean.row == 10}">
<div class="text-success">
<h:outputText value="#{bean.row}"/>
</div>
</h:panelGroup>
You can use a lambda with an input parameter, like so:
.Returns((string myval) => { return myval; });
Or slightly more readable:
.Returns<string>(x => x);
I’m pretty sure you don’t add the mime type as a JPEG on file downloads:
header('Content-Type: image/png');
These headers have never failed me:
$quoted = sprintf('"%s"', addcslashes(basename($file), '"\\'));
$size = filesize($file);
header('Content-Description: File Transfer');
header('Content-Type: application/octet-stream');
header('Content-Disposition: attachment; filename=' . $quoted);
header('Content-Transfer-Encoding: binary');
header('Connection: Keep-Alive');
header('Expires: 0');
header('Cache-Control: must-revalidate, post-check=0, pre-check=0');
header('Pragma: public');
header('Content-Length: ' . $size);
To do it on page load:
window.onload = function () {_x000D_
var input = document.getElementById('myTextInput');_x000D_
input.focus();_x000D_
input.select();_x000D_
}
_x000D_
<input id="myTextInput" value="Hello world!" />
_x000D_
I would (and have) used IDA Pro to decompile executables. It creates semi-complete code, you can decompile to assembly or C.
If you have a copy of the debug symbols around, load those into IDA before decompiling and it will be able to name many of the functions, parameters, etc.
You can put expressions inside braces. Notice in the compiled JavaScript why a for
loop would never be possible inside JSX syntax; JSX amounts to function calls and sugared function arguments. Only expressions are allowed.
(Also: Remember to add key
attributes to components rendered inside loops.)
JSX + ES2015:
render() {
return (
<table className="MyClassName">
<thead>
<tr>
{this.props.titles.map(title =>
<th key={title}>{title}</th>
)}
</tr>
</thead>
<tbody>
{this.props.rows.map((row, i) =>
<tr key={i}>
{row.map((col, j) =>
<td key={j}>{col}</td>
)}
</tr>
)}
</tbody>
</table>
);
}
JavaScript:
render: function() {
return (
React.DOM.table({className: "MyClassName"},
React.DOM.thead(null,
React.DOM.tr(null,
this.props.titles.map(function(title) {
return React.DOM.th({key: title}, title);
})
)
),
React.DOM.tbody(null,
this.props.rows.map(function(row, i) {
return (
React.DOM.tr({key: i},
row.map(function(col, j) {
return React.DOM.td({key: j}, col);
})
)
);
})
)
)
);
}
Instead of using HTML comments (which have no effect on PHP code -- which will still be executed), you should use PHP comments:
<?php /*
<tr>
<td><?php echo $entry_keyword; ?></td>
<td><input type="text" name="keyword" value="<?php echo $keyword; ?>" /></td>
</tr>
<tr>
<td><?php echo $entry_sort_order; ?></td>
<td><input name="sort_order" value="<?php echo $sort_order; ?>" size="1" /></td>
</tr>
*/ ?>
With that, the PHP code inside the HTML will not be executed; and nothing (not the HTML, not the PHP, not the result of its non-execution) will be displayed.
Just one note: you cannot nest C-style comments... which means the comment will end at the first */
encountered.
In Java all the variables you declare are actually "references" to the objects (or primitives) and not the objects themselves.
When you attempt to execute one object method, the reference asks the living object to execute that method. But if the reference is referencing NULL (nothing, zero, void, nada) then there is no way the method gets executed. Then the runtime let you know this by throwing a NullPointerException.
Your reference is "pointing" to null, thus "Null -> Pointer".
The object lives in the VM memory space and the only way to access it is using this
references. Take this example:
public class Some {
private int id;
public int getId(){
return this.id;
}
public setId( int newId ) {
this.id = newId;
}
}
And on another place in your code:
Some reference = new Some(); // Point to a new object of type Some()
Some otherReference = null; // Initiallly this points to NULL
reference.setId( 1 ); // Execute setId method, now private var id is 1
System.out.println( reference.getId() ); // Prints 1 to the console
otherReference = reference // Now they both point to the only object.
reference = null; // "reference" now point to null.
// But "otherReference" still point to the "real" object so this print 1 too...
System.out.println( otherReference.getId() );
// Guess what will happen
System.out.println( reference.getId() ); // :S Throws NullPointerException because "reference" is pointing to NULL remember...
This an important thing to know - when there are no more references to an object (in the example above when reference
and otherReference
both point to null) then the object is "unreachable". There is no way we can work with it, so this object is ready to be garbage collected, and at some point, the VM will free the memory used by this object and will allocate another.
SELECT
*
FROM
< table_name >
WHERE
< date_field > BETWEEN DATE_SUB(NOW(), INTERVAL 30 DAY)
AND NOW();
Syntax highlighting is controlled by the theme you use, accessible through Preferences -> Color Scheme
. Themes highlight different keywords, functions, variables, etc. through the use of scopes, which are defined by a series of regular expressions contained in a .tmLanguage
file in a language's directory/package. For example, the JavaScript.tmLanguage
file assigns the scopes source.js
and variable.language.js
to the this
keyword. Since Sublime Text 3 is using the .sublime-package
zip file format to store all the default settings it's not very straightforward to edit the individual files.
Unfortunately, not all themes contain all scopes, so you'll need to play around with different ones to find one that looks good, and gives you the highlighting you're looking for. There are a number of themes that are included with Sublime Text, and many more are available through Package Control, which I highly recommend installing if you haven't already. Make sure you follow the ST3 directions.
As it so happens, I've developed the Neon Color Scheme
, available through Package Control, that you might want to take a look at. My main goal, besides trying to make a broad range of languages look as good as possible, was to identify as many different scopes as I could - many more than are included in the standard themes. While the JavaScript language definition isn't as thorough as Python's, for example, Neon
still has a lot more diversity than some of the defaults like Monokai
or Solarized
.
I should note that I used @int3h's Better JavaScript
language definition for this image instead of the one that ships with Sublime. It can be installed via Package Control.
UPDATE
Of late I've discovered another JavaScript replacement language definition - JavaScriptNext - ES6 Syntax
. It has more scopes than the base JavaScript or even Better JavaScript. It looks like this on the same code:
Also, since I originally wrote this answer, @skuroda has released PackageResourceViewer
via Package Control. It allows you to seamlessly view, edit and/or extract parts of or entire .sublime-package
packages. So, if you choose, you can directly edit the color schemes included with Sublime.
ANOTHER UPDATE
With the release of nearly all of the default packages on Github, changes have been coming fast and furiously. The old JS syntax has been completely rewritten to include the best parts of JavaScript Next ES6 Syntax, and now is as fully ES6-compatible as can be. A ton of other changes have been made to cover corner and edge cases, improve consistency, and just overall make it better. The new syntax has been included in the (at this time) latest dev build 3111.
If you'd like to use any of the new syntaxes with the current beta build 3103, simply clone the Github repo someplace and link the JavaScript
(or whatever language(s) you want) into your Packages
directory - find it on your system by selecting Preferences -> Browse Packages...
. Then, simply do a git pull
in the original repo directory from time to time to refresh any changes, and you can enjoy the latest and greatest! I should note that the repo uses the new .sublime-syntax
format instead of the old .tmLanguage
one, so they will not work with ST3 builds prior to 3084, or with ST2 (in both cases, you should have upgraded to the latest beta or dev build anyway).
I'm currently tweaking my Neon Color Scheme to handle all of the new scopes in the new JS syntax, but most should be covered already.
I have too low reputation to add comment to @bernie response, with response to @user1506145. I have run in to same issue.
The answer to it is a interval parameter which fixes things up
import matplotlib.pyplot as plt
import matplotlib.dates as mdates
import numpy as np
import datetime as dt
np.random.seed(1)
N = 100
y = np.random.rand(N)
now = dt.datetime.now()
then = now + dt.timedelta(days=100)
days = mdates.drange(now,then,dt.timedelta(days=1))
plt.gca().xaxis.set_major_formatter(mdates.DateFormatter('%Y-%m-%d'))
plt.gca().xaxis.set_major_locator(mdates.DayLocator(interval=5))
plt.plot(days,y)
plt.gcf().autofmt_xdate()
plt.show()
Look in this libraryes for php http://phptrends.com/category/70. Or use native from php http://www.php.net/manual/en/book.sockets.php .
you can probably ping the server via ajax inside javascript. The php file might look something like:
<?php
session_start();
$id = session_id();
echo $id;
?>
This will return you the current session id. Was this what you were looking for.
I also recommend using Joda as mentioned before.
Solving your problem using standard Java Date
objects only can be done as follows:
// **** YOUR CODE **** BEGIN ****
long ts = System.currentTimeMillis();
Date localTime = new Date(ts);
String format = "yyyy/MM/dd HH:mm:ss";
SimpleDateFormat sdf = new SimpleDateFormat(format);
// Convert Local Time to UTC (Works Fine)
sdf.setTimeZone(TimeZone.getTimeZone("UTC"));
Date gmtTime = new Date(sdf.format(localTime));
System.out.println("Local:" + localTime.toString() + "," + localTime.getTime() + " --> UTC time:"
+ gmtTime.toString() + "," + gmtTime.getTime());
// **** YOUR CODE **** END ****
// Convert UTC to Local Time
Date fromGmt = new Date(gmtTime.getTime() + TimeZone.getDefault().getOffset(localTime.getTime()));
System.out.println("UTC time:" + gmtTime.toString() + "," + gmtTime.getTime() + " --> Local:"
+ fromGmt.toString() + "-" + fromGmt.getTime());
Output:
Local:Tue Oct 15 12:19:40 CEST 2013,1381832380522 --> UTC time:Tue Oct 15 10:19:40 CEST 2013,1381825180000
UTC time:Tue Oct 15 10:19:40 CEST 2013,1381825180000 --> Local:Tue Oct 15 12:19:40 CEST 2013-1381832380000
You need to use menu.clear() before inflating menus.
@Override
public void onCreateOptionsMenu(Menu menu, MenuInflater inflater) {
menu.clear();
inflater.inflate(R.menu.menu, menu);
super.onCreateOptionsMenu(menu, inflater);
}
and
@Override
public void onCreate(Bundle savedInstanceState) {
super.onCreate(savedInstanceState);
setHasOptionsMenu(true);
}
The other answers goes deep and give great explanations. For those who look for quick answer,
$a ?: 'fallback'
is $a ? $a : 'fallback'
while
$a ?? 'fallback'
is $a = isset($a) ? $a : 'fallback'
The main difference would be when the left operator is either:
0
, ''
, false
, []
, ...) Got this error while uploading document to CloudSearch through Java SDK. The issue was because of a special character in the document to be uploaded. The error "The request signature we calculated does not match the signature you provided. Check your AWS Secret Access Key and signing method." is very misleading.
Add ?var1=data1&var2=data2
to the end of url to submit values to the page via GET:
using System.Net;
using System.IO;
string url = "https://www.example.com/scriptname.php?var1=hello";
HttpWebRequest request = (HttpWebRequest)WebRequest.Create(url);
HttpWebResponse response = (HttpWebResponse)request.GetResponse();
Stream resStream = response.GetResponseStream();
This https://github.com/rails/strong_parameters seems like the relevant section of the docs:
The permitted scalar types are String, Symbol, NilClass, Numeric, TrueClass, FalseClass, Date, Time, DateTime, StringIO, IO, ActionDispatch::Http::UploadedFile and Rack::Test::UploadedFile.
To declare that the value in params must be an array of permitted scalar values map the key to an empty array:
params.permit(:id => [])
In my app, the category_ids are passed to the create action in an array
"category_ids"=>["", "2"],
Therefore, when declaring strong parameters, I explicitly set category_ids to be an array
params.require(:question).permit(:question_details, :question_content, :user_id, :accepted_answer_id, :province_id, :city, :category_ids => [])
Works perfectly now!
(IMPORTANT: As @Lenart notes in the comments, the array declarations must be at the end of the attributes list, otherwise you'll get a syntax error.)
The value for your onClick
attribute should be a function, not a function call.
<button type="submit" onClick={function(){removeTaskFunction(todo)}}>Submit</button>
@ECHO OFF
TITLE Addition
ECHO Type the first number you wish to add:
SET /P Num1Add=
ECHO Type the second number you want to add to the first number:
SET /P Num2Add=
ECHO.
SET /A Ans=%Num1Add%+%Num2Add%
ECHO The result is: %Ans%
ECHO.
ECHO Press any key to exit.
PAUSE>NUL
Not as a command, but this information is in the registry:
HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Runtime Environment
CurrentVersion
REG_SZJava Runtime Environment
named with the CurrentVersion
valueJavaHome
REG_SZ to get the pathFor example on my workstation i have
HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Runtime Environment
CurrentVersion = "1.6"
HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Runtime Environment\1.5
JavaHome = "C:\Program Files\Java\jre1.5.0_20"
HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Runtime Environment\1.6
JavaHome = "C:\Program Files\Java\jre6"
So my current JRE is in C:\Program Files\Java\jre6
If you are using the uiSref directive then you can do this
uiSref="^"
Are you using a Virtual Environment with Virtual Wrapper? Are you on a Mac?
If so try this:
Enter the following into your command line to start up the virtual environment and then work on it
1.)
source virtualenvwrapper.sh
or
source /usr/local/bin/virtualenvwrapper.sh
2.)
workon [environment name]
Note (from a newbie) - do not put brackets around your environment name
I spent few hours on this.
Even if I had the right dependency the problem was fixed only after I deleted the com.fasterxml.jackson folder in the .m2 repository under C:\Users\username.m2 and updated the project
Please use the following query to list the tables in your DB.
select name from sys.Tables
In Addition, you can add a where
condition, to skip system generated tables and lists only user created table by adding type ='U'
Ex : select name from sys.Tables where type ='U'
Use typeof
:
> typeof "foo"
"string"
> typeof true
"boolean"
> typeof 42
"number"
So you can do:
if(typeof bar === 'number') {
//whatever
}
Be careful though if you define these primitives with their object wrappers (which you should never do, use literals where ever possible):
> typeof new Boolean(false)
"object"
> typeof new String("foo")
"object"
> typeof new Number(42)
"object"
The type of an array is still object
. Here you really need the instanceof
operator.
Update:
Another interesting way is to examine the output of Object.prototype.toString
:
> Object.prototype.toString.call([1,2,3])
"[object Array]"
> Object.prototype.toString.call("foo bar")
"[object String]"
> Object.prototype.toString.call(45)
"[object Number]"
> Object.prototype.toString.call(false)
"[object Boolean]"
> Object.prototype.toString.call(new String("foo bar"))
"[object String]"
> Object.prototype.toString.call(null)
"[object Null]"
> Object.prototype.toString.call(/123/)
"[object RegExp]"
> Object.prototype.toString.call(undefined)
"[object Undefined]"
With that you would not have to distinguish between primitive values and objects.
Unix will only run commands if they are available on the system path, as you can view by the $PATH variable
echo $PATH
Executables located in directories that are not on the path cannot be run unless you specify their full location. So in your case, assuming the executable is in the current directory you are working with, then you can execute it as such
./my-exec
Where my-exec
is the name of your program.
In our case we had a query which loads multiple items with select * from x where something in (...) The in part was so long for benchmark test.(17mb as text query). Query is valid but text so long. Shortening the query solved the problem.
In cases where you do not have access to the derived class source, but need all the source of the derived class besides the current method, then I would recommended you should also do a derived class and call the implementation of the derived class.
Here is an example:
//No access to the source of the following classes
public class Base
{
public virtual void method1(){ Console.WriteLine("In Base");}
}
public class Derived : Base
{
public override void method1(){ Console.WriteLine("In Derived");}
public void method2(){ Console.WriteLine("Some important method in Derived");}
}
//Here should go your classes
//First do your own derived class
public class MyDerived : Base
{
}
//Then derive from the derived class
//and call the bass class implementation via your derived class
public class specialDerived : Derived
{
public override void method1()
{
MyDerived md = new MyDerived();
//This is actually the base.base class implementation
MyDerived.method1();
}
}
Yes. 'Z' stands for Zulu time, which is also GMT and UTC.
From http://en.wikipedia.org/wiki/Coordinated_Universal_Time:
The UTC time zone is sometimes denoted by the letter Z—a reference to the equivalent nautical time zone (GMT), which has been denoted by a Z since about 1950. The letter also refers to the "zone description" of zero hours, which has been used since 1920 (see time zone history). Since the NATO phonetic alphabet and amateur radio word for Z is "Zulu", UTC is sometimes known as Zulu time.
Technically, because the definition of nautical time zones is based on longitudinal position, the Z time is not exactly identical to the actual GMT time 'zone'. However, since it is primarily used as a reference time, it doesn't matter what area of Earth it applies to as long as everyone uses the same reference.
From wikipedia again, http://en.wikipedia.org/wiki/Nautical_time:
Around 1950, a letter suffix was added to the zone description, assigning Z to the zero zone, and A–M (except J) to the east and N–Y to the west (J may be assigned to local time in non-nautical applications; zones M and Y have the same clock time but differ by 24 hours: a full day). These were to be vocalized using a phonetic alphabet which pronounces the letter Z as Zulu, leading sometimes to the use of the term "Zulu Time". The Greenwich time zone runs from 7.5°W to 7.5°E longitude, while zone A runs from 7.5°E to 22.5°E longitude, etc.
You can use date.js to achieve this:
var date = new Date('2014-01-06');
var newDate = date.toString('dd-MM-yy');
Alternatively, you can do it natively like this:
var dateAr = '2014-01-06'.split('-');_x000D_
var newDate = dateAr[1] + '-' + dateAr[2] + '-' + dateAr[0].slice(-2);_x000D_
_x000D_
console.log(newDate);
_x000D_
:::
works only with lists, while ++
can be used with any traversable. In the current implementation (2.9.0), ++
falls back on :::
if the argument is also a List
.
Full solution is below (including cursor structure). Many thanks to Cassius Porcus for the begin trans ... commit
code from posting above.
declare @mystat6 bigint
declare @mystat6p varchar(50)
declare @mystat6b bigint
DECLARE mycur1 CURSOR for
select result1,picture,bittot from all_Tempnogos2results11
OPEN mycur1
FETCH NEXT FROM mycur1 INTO @mystat6, @mystat6p , @mystat6b
WHILE @@Fetch_Status = 0
BEGIN
begin tran /* default read committed isolation level is fine */
if not exists (select * from all_Tempnogos2results11_uniq with (updlock, rowlock, holdlock)
where all_Tempnogos2results11_uniq.result1 = @mystat6
and all_Tempnogos2results11_uniq.bittot = @mystat6b )
insert all_Tempnogos2results11_uniq values (@mystat6 , @mystat6p , @mystat6b)
--else
-- /* update */
commit /* locks are released here */
FETCH NEXT FROM mycur1 INTO @mystat6 , @mystat6p , @mystat6b
END
CLOSE mycur1
DEALLOCATE mycur1
go
You can implement a class that holds the fields you have in your JSON
class MyData
{
public string t;
public bool a;
public object[] data;
public string[][] type;
}
and then use the generic version of DeserializeObject:
MyData tmp = JsonConvert.DeserializeObject<MyData>(json);
foreach (string typeStr in tmp.type[0])
{
// Do something with typeStr
}
Documentation: Serializing and Deserializing JSON
DataTable dr_art_line_2 = ds.Tables["QuantityInIssueUnit"];
for (int i = 0; i < dr_art_line_2.Rows.Count; i++)
{
QuantityInIssueUnit_value = Convert.ToInt32(dr_art_line_2.Rows[i]["columnname"]);
//Similarly for QuantityInIssueUnit_uom.
}
In PHP I like using mysqli_real_escape_string() which escapes special characters in a string for use in an SQL statement.
see https://www.php.net/manual/en/mysqli.real-escape-string.php
As well as pointers and references to incomplete types, you can also declare function prototypes that specify parameters and/or return values that are incomplete types. However, you cannot define a function having a parameter or return type that is incomplete, unless it is a pointer or reference.
Examples:
struct X; // Forward declaration of X
void f1(X* px) {} // Legal: can always use a pointer
void f2(X& x) {} // Legal: can always use a reference
X f3(int); // Legal: return value in function prototype
void f4(X); // Legal: parameter in function prototype
void f5(X) {} // ILLEGAL: *definitions* require complete types
This can be done elegantly with Ray, a system that allows you to easily parallelize and distribute your Python code.
To parallelize your example, you'd need to define your functions with the @ray.remote decorator
, and then invoke them with .remote
.
import ray
ray.init()
# Define functions you want to execute in parallel using
# the ray.remote decorator.
@ray.remote
def func1():
print("Working")
@ray.remote
def func2():
print("Working")
# Execute func1 and func2 in parallel.
ray.get([func1.remote(), func2.remote()])
If func1()
and func2()
return results, you need to rewrite the above code a bit, by replacing ray.get([func1.remote(), func2.remote()])
with:
ret_id1 = func1.remote()
ret_id2 = func1.remote()
ret1, ret2 = ray.get([ret_id1, ret_id2])
There are a number of advantages of using Ray over the multiprocessing module or using multithreading. In particular, the same code will run on a single machine as well as on a cluster of machines.
For more advantages of Ray see this related post.
^[0-9][0-9]?[^A-Za-z0-9]?po$
You can test it here: http://www.regextester.com/
To use this in C#,
Regex r = new Regex(@"^[0-9][0-9]?[^A-Za-z0-9]?po$");
if (r.Match(someText).Success) {
//Do Something
}
Remember, @ is a useful symbol that means the parser takes the string literally (eg, you don't need to write \\ for one backslash)
.cut_text {_x000D_
white-space: nowrap; _x000D_
width: 200px; _x000D_
border: 1px solid #000000;_x000D_
overflow: hidden;_x000D_
text-overflow: ellipsis;_x000D_
}
_x000D_
<div class="cut_text">_x000D_
_x000D_
very long text_x000D_
</div>
_x000D_
The POST/GET with 204 seems fine in the first sight and will also work.
Documentation says, 2xx -- This class of status codes indicates the action requested by the client was received, understood, accepted, and processed successfully. whereas 4xx -- The 4xx class of status code is intended for situations in which the client seems to have erred.
Since, the request was successfully received, understood and processed on server. The result was that the resource was not found. So, in this case this was not an error on the client side or the client has not erred.
Hence this should be a series 2xx code and not 4xx. Sending 204 (No Content) in this case will be better than a 404 or 410 response.
I think the current right way to do this is by pip
like Pramod comments
pip install beautifulsoup4
because of last changes in Python, see discussion here. This was not so in the past.
\d is a digit, + is 1 or more, so a sequence of 1 or more digits
You need to chain the method like this:
$('#input').val('test').change();
Allthough it's now a native type, it's still defined behind the scenes as an integer (int I think) where the literal false
is 0 and true
is 1. But I think all logic still consider anything but 0 as true, so strictly speaking the true literal is probably a keyword for the compiler to test if something is not false.
if(someval == true){
probably translates to:
if(someval !== false){ // e.g. someval !== 0
by the compiler
Some of the scenarios, object.item would not be loaded or will be undefined.
Use ng-init
<select ng-init="object.item=2" ng-model="object.item"
ng-options="item.id as item.name for item in list"
long milliseconds = DateTime.Now.Ticks / TimeSpan.TicksPerMillisecond;
This is actually how the various Unix conversion methods are implemented in the DateTimeOffset
class (.NET Framework 4.6+, .NET Standard 1.3+):
long milliseconds = DateTimeOffset.Now.ToUnixTimeMilliseconds();
The other answers are all good. For Xilinx FPGA designs, it is best not to use global reset lines, and use initial
blocks for reset conditions for most logic. Here is the white paper from Ken Chapman (Xilinx FPGA guru)
http://japan.xilinx.com/support/documentation/white_papers/wp272.pdf
for swift 3 and Xcode 8.2 (nice to have blocks, but if You compile for iOS9 AND want userInfo):
...
self.timer = Timer(fireAt: fire,
interval: deltaT,
target: self,
selector: #selector(timerCallBack(timer:)),
userInfo: ["custom":"data"],
repeats: true)
RunLoop.main.add(self.timer!, forMode: RunLoopMode.commonModes)
self.timer!.fire()
}
func timerCallBack(timer: Timer!){
let info = timer.userInfo
print(info)
}
Anyway we could use sympy library , also support for multiset permutations
import sympy
from sympy.utilities.iterables import multiset_permutations
t = [1,2,3]
p = list(multiset_permutations(t))
print(p)
# [[1, 2, 3], [1, 3, 2], [2, 1, 3], [2, 3, 1], [3, 1, 2], [3, 2, 1]]
Answer is highly inspired by Get all permutations of a numpy array
I think you are getting confused about what the a:active
CSS selector does. This will only change the colour of your link when you click it (and only for the duration of the click i.e. how long your mouse button stays down). What you need to do is introduce a new class e.g. .selected
into your CSS and when you select a link, update the selected menu item with new class e.g.
<div class="menuBar">
<ul>
<li class="selected"><a href="index.php">HOME</a></li>
<li><a href="two.php">PORTFOLIO</a></li>
....
</ul>
</div>
// specific CSS for your menu
div.menuBar li.selected a { color: #FF0000; }
// more general CSS
li.selected a { color: #FF0000; }
You will need to update your template page to take in a selectedPage
parameter.
In most of the cases it’s only a need for the transpiler/bundler, which might not be configured to work with JSX files, but with JS! So you are forced to use JS files instead of JSX.
And since react is just a library for javascript, it makes no difference for you to choose between JSX or JS. They’re completely interchangeable!
In some cases users/developers might also choose JSX over JS, because of code highlighting, but the most of the newer editors are also viewing the react syntax correctly in JS files.
Since you have not mentioned what needs to be copied, I have left that section empty in the code below.
Also you don't need to move the email to the folder first and then run the macro in that folder. You can run the macro on the incoming mail and then move it to the folder at the same time.
This will get you started. I have commented the code so that you will not face any problem understanding it.
First paste the below mentioned code in the outlook module.
Then
When the new email arrives not only will the email move to the folder that you specify but data from it will be exported to Excel as well.
UNTESTED
Const xlUp As Long = -4162
Sub ExportToExcel(MyMail As MailItem)
Dim strID As String, olNS As Outlook.Namespace
Dim olMail As Outlook.MailItem
Dim strFileName As String
'~~> Excel Variables
Dim oXLApp As Object, oXLwb As Object, oXLws As Object
Dim lRow As Long
strID = MyMail.EntryID
Set olNS = Application.GetNamespace("MAPI")
Set olMail = olNS.GetItemFromID(strID)
'~~> Establish an EXCEL application object
On Error Resume Next
Set oXLApp = GetObject(, "Excel.Application")
'~~> If not found then create new instance
If Err.Number <> 0 Then
Set oXLApp = CreateObject("Excel.Application")
End If
Err.Clear
On Error GoTo 0
'~~> Show Excel
oXLApp.Visible = True
'~~> Open the relevant file
Set oXLwb = oXLApp.Workbooks.Open("C:\Sample.xls")
'~~> Set the relevant output sheet. Change as applicable
Set oXLws = oXLwb.Sheets("Sheet1")
lRow = oXLws.Range("A" & oXLApp.Rows.Count).End(xlUp).Row + 1
'~~> Write to outlook
With oXLws
'
'~~> Code here to output data from email to Excel File
'~~> For example
'
.Range("A" & lRow).Value = olMail.Subject
.Range("B" & lRow).Value = olMail.SenderName
'
End With
'~~> Close and Clean up Excel
oXLwb.Close (True)
oXLApp.Quit
Set oXLws = Nothing
Set oXLwb = Nothing
Set oXLApp = Nothing
Set olMail = Nothing
Set olNS = Nothing
End Sub
FOLLOWUP
To extract the contents from your email body, you can split it using SPLIT() and then parsing out the relevant information from it. See this example
Dim MyAr() As String
MyAr = Split(olMail.body, vbCrLf)
For i = LBound(MyAr) To UBound(MyAr)
'~~> This will give you the contents of your email
'~~> on separate lines
Debug.Print MyAr(i)
Next i
I read an article a while ago that talked about locking down every class as much as possible. Make everything final and private unless you have an immediate need to expose some data or functionality to the outside world. It's always easy to expand the scope to be more permissible later on, but not the other way around. First consider making as many things as possible final
which will make choosing between private
and protected
much easier.
Now if you're left with a final class, then make everything private unless something is absolutely needed by the world - make that public.
If you're left with a class that does have subclass(es), then carefully examine every property and method. First consider if you even want to expose that property/method to subclasses. If you do, then consider whether a subclass can wreak havoc on your object if it messed up the property value or method implementation in the process of overriding. If it's possible, and you want to protect your class' property/method even from subclasses (sounds ironic, I know), then make it private. Otherwise make it protected.
Disclaimer: I don't program much in Java :)
There is no such function; the easiest way to do this is to use a dict comprehension:
my_dictionary = {k: f(v) for k, v in my_dictionary.items()}
In python 2.7, use the .iteritems()
method instead of .items()
to save memory. The dict comprehension syntax wasn't introduced until python 2.7.
Note that there is no such method on lists either; you'd have to use a list comprehension or the map()
function.
As such, you could use the map()
function for processing your dict as well:
my_dictionary = dict(map(lambda kv: (kv[0], f(kv[1])), my_dictionary.iteritems()))
but that's not that readable, really.
I guess the verdict is i cannot programmatically uniquely identify a computer which is visiting my web site.
I have the following question. When i use a machine which has never visited my online banking web site i get asked for additional authentification. then, if i go back a second time to the online banking site i dont get asked the additional authentification. reading the answers to my question i decided it must be a cookie involved. therefore, i deleted all cookies in IE and relogged onto my online banking site fully expecting to be asked the authentification questions again. to my surprise i was not asked. doesnt this lead one to believe the bank is doing some kind of pc tagging which doesnt involve cookies?
further, after much googling today i found the following company who claims to sell a solution which does uniquely identify machines which visit a web site. http://www.the41.com/products.asp.
i appreciate all the good information if you could clarify further this conflicting information i found i would greatly appreciate it.
You could try scraping whatever you need with PHP or another server side language, then put the iframe to the scraped content. Here's an example with PHP:
scrapedcontent.php:
<?php
$homepage = file_get_contents('http://www.example.com/');
echo $homepage;
?>
index.html:
<iframe src="scrapedcontent.php"></iframe>
If the question is docker related... the official nginx docker images do this by making softlinks towards stdout/stderr
RUN ln -sf /dev/stdout /var/log/nginx/access.log && ln -sf /dev/stderr /var/log/nginx/error.log