@gimel's answer is correct if you can guarantee the package hierarchy he mentions. If you can't -- if your real need is as you expressed it, exclusively tied to directories and without any necessary relationship to packaging -- then you need to work on __file__ to find out the parent directory (a couple of os.path.dirname calls will do;-), then (if that directory is not already on sys.path) prepend temporarily insert said dir at the very start of sys.path, __import__, remove said dir again -- messy work indeed, but, "when you must, you must" (and Pyhon strives to never stop the programmer from doing what must be done -- just like the ISO C standard says in the "Spirit of C" section in its preface!-).

Here is an example that may work for you:

import sys
import os.path
sys.path.append(
    os.path.abspath(os.path.join(os.path.dirname(__file__), os.path.pardir)))

import module_in_parent_dir

In linux shell, many commands accept multiple parameters and therefore could be used with wild cards. So, for example if you want to move all files from folder A to folder B, you write:

mv A/* B

If you want to move all files with a certain "look" to it, you could do like this:

mv A/*.txt B

Which copies all files that are blablabla.txt to folder B

Star (*) can substitute any number of characters or letters while ? can substitute one. For example if you have many files in the shape file_number.ext and you want to move only the ones that have two digit numbers, you could use a command like this:

mv A/file_??.ext B

Or more complicated examples:

mv A/fi*_??.e* B

For files that look like fi<-something->_<-two characters->.e<-something->

Unlike many commands in shell that require -R to (for example) copy or remove subfolders, mv does that itself.

Remember that mv overwrites without asking (unless the files being overwritten are read only or you don't have permission) so make sure you don't lose anything in the process.

For your future information, if you have subfolders that you want to copy, you could use the -R option, saying you want to do the command recursively. So it would look something like this:

cp A/* B -R

By the way, all I said works with rm (remove, delete) and cp (copy) too and beware, because once you delete, there is no turning back! Avoid commands like rm * -R unless you are sure what you are doing.

Whenever there are issues of mismatched axis limits, the right tool in base graphics is to use matplot. The key is to leverage the from and to arguments to density.default. It's a bit hackish, but fairly straightforward to roll yourself:

set.seed(102349)
x1 = rnorm(1000, mean = 5, sd = 3)
x2 = rnorm(5000, mean = 2, sd = 8)

xrng = range(x1, x2)

#force the x values at which density is
#  evaluated to be the same between 'density'
#  calls by specifying 'from' and 'to'
#  (and possibly 'n', if you'd like)
kde1 = density(x1, from = xrng[1L], to = xrng[2L])
kde2 = density(x2, from = xrng[1L], to = xrng[2L])

matplot(kde1$x, cbind(kde1$y, kde2$y))

Add bells and whistles as desired (matplot accepts all the standard plot/par arguments, e.g. lty, type, col, lwd, ...).

Link statically to libstdc++ with -static-libstdc++ gcc option.

This is my implementation. Basically, you can setup any attribute and it works.

public static class EnumExtensions
    {
        public static string GetDescription(this Enum @enum)
        {
            Type type = @enum.GetType();
            FieldInfo fi = type.GetField(@enum.ToString());
            DescriptionAttribute[] attrs =
                fi.GetCustomAttributes(typeof(DescriptionAttribute), false) as DescriptionAttribute[];
            if (attrs.Length > 0)
            {
                return attrs[0].Description;
            }
            return null;
        }
    }

For the purpose of my code I found out this decision which corresponds with some of the answers above:

ES6 variant:

const checkType = o => Object.prototype
                    .toString
                    .call(o)
                    .replace(/\[|object\s|\]/g, '')
                    .toLowerCase();

ES5 variant:

function checkType(o){
   return Object.prototype
                    .toString
                    .call(o)
                    .replace(/\[|object\s|\]/g, '')
                    .toLowerCase();
}

You can use it very simply:

checkType([]) === 'array'; // true
checkType({}) === 'object'; // true
checkType(1) === 'number'; // true
checkType('') === 'string'; // true
checkType({}.p) === 'undefined'; // true
checkType(null) === 'null'; // true

and so on..

My solution if you work with the Trunk/ and Release/ workflow:

Right click on Trunk/ which you will be creating your Branch from:

Select Branch/Tag:

Type in location of your new branch, commit message, and any externals (if your repository has them):

Save it as a .ps1 file and then execute

powershell -file "path\to your\start stop nation service command file.ps1"

Following @Aravind's answer with more details

@RequestMapping("/myPath.htm")
public ModelAndView add(HttpServletRequest request, HttpServletResponse response) throws Exception{
    myServiceMethodSettingCookie(request, response);        //Do service call passing the response
    return new ModelAndView("CustomerAddView");
}

// service method
void myServiceMethodSettingCookie(HttpServletRequest request, HttpServletResponse response){
    final String cookieName = "my_cool_cookie";
    final String cookieValue = "my cool value here !";  // you could assign it some encoded value
    final Boolean useSecureCookie = false;
    final int expiryTime = 60 * 60 * 24;  // 24h in seconds
    final String cookiePath = "/";

    Cookie cookie = new Cookie(cookieName, cookieValue);

    cookie.setSecure(useSecureCookie);  // determines whether the cookie should only be sent using a secure protocol, such as HTTPS or SSL

    cookie.setMaxAge(expiryTime);  // A negative value means that the cookie is not stored persistently and will be deleted when the Web browser exits. A zero value causes the cookie to be deleted.

    cookie.setPath(cookiePath);  // The cookie is visible to all the pages in the directory you specify, and all the pages in that directory's subdirectories

    response.addCookie(cookie);
}

Related docs:

http://docs.oracle.com/javaee/7/api/javax/servlet/http/Cookie.html

http://docs.spring.io/spring-security/site/docs/3.0.x/reference/springsecurity.html

I know an answer has already been accepted, but wanted to point a few things out.

Setting the content-type and charset is obviously a good practice, doing it on the server is much better, because it ensures consistency across your application.

However, I would use UTF-8 only when the language of my application uses a lot of characters that are available only in the UTF-8 charset. If you want to show a unicode character or symbol in one of cases, you can do so without changing the charset of your page.

HTML renderers have always been able to display symbols which are not part of the encoding character set of the page, as long as you mention the symbol in its numeric character reference (NCR). Sounds weird but its true.

So, even if your html has a header that states it has an encoding of ansi or any of the iso charsets, you can display a check mark by using its html character reference, in decimal - &#10003; or in hex - &#x2713;

So its a little difficult to understand why you are facing this issue on your pages. Can you check if the NCR value is correct, this is a good reference http://www.fileformat.info/info/unicode/char/2713/index.htm

Response.Write('... javascript that opens a window...')

http://www.aspspider.com/qa/Question2714.aspx

I was looking for something like this, Found in : http://bytes.com/groups/net-c/268661-how-upload-file-via-c-code (modified for correctness):

public static string UploadFilesToRemoteUrl(string url, string[] files, NameValueCollection formFields = null)
{
    string boundary = "----------------------------" + DateTime.Now.Ticks.ToString("x");

    HttpWebRequest request = (HttpWebRequest) WebRequest.Create(url);
    request.ContentType = "multipart/form-data; boundary=" +
                            boundary;
    request.Method = "POST";
    request.KeepAlive = true;

    Stream memStream = new System.IO.MemoryStream();

    var boundarybytes = System.Text.Encoding.ASCII.GetBytes("\r\n--" +
                                                            boundary + "\r\n");
    var endBoundaryBytes = System.Text.Encoding.ASCII.GetBytes("\r\n--" +
                                                                boundary + "--");


    string formdataTemplate = "\r\n--" + boundary +
                                "\r\nContent-Disposition: form-data; name=\"{0}\";\r\n\r\n{1}";

    if (formFields != null)
    {
        foreach (string key in formFields.Keys)
        {
            string formitem = string.Format(formdataTemplate, key, formFields[key]);
            byte[] formitembytes = System.Text.Encoding.UTF8.GetBytes(formitem);
            memStream.Write(formitembytes, 0, formitembytes.Length);
        }
    }

    string headerTemplate =
        "Content-Disposition: form-data; name=\"{0}\"; filename=\"{1}\"\r\n" +
        "Content-Type: application/octet-stream\r\n\r\n";

    for (int i = 0; i < files.Length; i++)
    {
        memStream.Write(boundarybytes, 0, boundarybytes.Length);
        var header = string.Format(headerTemplate, "uplTheFile", files[i]);
        var headerbytes = System.Text.Encoding.UTF8.GetBytes(header);

        memStream.Write(headerbytes, 0, headerbytes.Length);

        using (var fileStream = new FileStream(files[i], FileMode.Open, FileAccess.Read))
        {
            var buffer = new byte[1024];
            var bytesRead = 0;
            while ((bytesRead = fileStream.Read(buffer, 0, buffer.Length)) != 0)
            {
                memStream.Write(buffer, 0, bytesRead);
            }
        }
    }

    memStream.Write(endBoundaryBytes, 0, endBoundaryBytes.Length);
    request.ContentLength = memStream.Length;

    using (Stream requestStream = request.GetRequestStream())
    {
        memStream.Position = 0;
        byte[] tempBuffer = new byte[memStream.Length];
        memStream.Read(tempBuffer, 0, tempBuffer.Length);
        memStream.Close();
        requestStream.Write(tempBuffer, 0, tempBuffer.Length);
    }

    using (var response = request.GetResponse())
    {
        Stream stream2 = response.GetResponseStream();
        StreamReader reader2 = new StreamReader(stream2);
        return reader2.ReadToEnd();
    }
}

First of all i will say Nice Thaught to develop such app.

Now i am not sure about it, but if you can able to get the face-detection like thing for any object in android camera so with help of that you can achieve that things.

Well i am not sure about it but still have give some view so you can get idea of it.

All the Best. :))

First you will have to do the rake db:rollback for destroy the table
if you have already run rake db:migrate and then you can run

rails d scaffold Model

Just for the sake of completeness: there are IPv4-mapped IPv6 addresses, where you can embed an IPv4 address in an IPv6 address (may not be supported by every IPv6 equipment).

Example: I run a server on my machine, which can be accessed via http://127.0.0.1:19983/solr. If I access it via an IPv4-mapped IPv6 address then I access it via http://[::ffff:127.0.0.1]:19983/solr (which will be converted to http://[::ffff:7f00:1]:19983/solr)

With Symfony 3.3, I have used this method and working fine.

I have 4 routes like

admin_category_index, admin_category_detail, admin_category_create, admin_category_update

And just one line make an active class for all routes.

<li  {% if app.request.get('_route') starts with 'admin_category' %} class="active"{% endif %}>
 <a href="{{ path('admin_category_index') }}">Product Categoires</a>
</li>

You can use bcp utility.

To copy the result set from a Transact-SQL statement to a data file, use the queryout option. The following example copies the result of a query into the Contacts.txt data file. The example assumes that you are using Windows Authentication and have a trusted connection to the server instance on which you are running the bcp command. At the Windows command prompt, enter:

bcp "<your query here>" queryout Contacts.txt -c -T

You can use BCP by directly calling as operating sytstem command in SQL Agent job.

You have to add Button to excel sheet(say sheet1) from which you can go to another sheet(say sheet2).

Button can be added from Developer tab in excel. If developer tab is not there follow below steps to enable.

GOTO file -> options -> Customize Ribbon -> enable checkbox of developer on right panel -> Done.

To Add button :-

Developer Tab -> Insert -> choose first item button -> choose location of button-> Done.

To give name for button :-

Right click on button -> edit text.

To add code for going to sheet2 :-

Right click on button -> Assign Macro -> New -> (microsoft visual basic will open to code for button) -> paste below code

Worksheets("Sheet2").Visible = True
Worksheets("Sheet2").Activate

Save the file using 'Excel Macro Enable Template(*.xltm)' By which the code is appended with excel sheet.

The solution of so-called problem is to use a spy Mockito.spy(...) instead of a mock Mockito.mock(..).

Spy enables us to partial mocking. Mockito is good at this matter. Because you have class which is not complete, in this way you mock some required place in this class.

This also works:

this.getCurrentFocus()

It gets the view so I can use it.

You can try with margin for right div

margin: -200px 0 0 350px;

It seems to me that all other answers here (so far) fail to address the race-condition that occurs with their proposed solutions.

Any code where you first check for the files existence, and then, a few lines later in your program, you create it, runs the risk of the file being created while you weren't looking and causing you problems (or you causing the owner of "that other file" problems).

If you want to avoid this sort of thing, I would suggest something like the following (untested):

import os

def open_if_not_exists(filename):
    try:
        fd = os.open(filename, os.O_CREAT | os.O_EXCL | os.O_WRONLY)
    except OSError, e:
        if e.errno == 17:
            print e
            return None
        else:
            raise
    else:
        return os.fdopen(fd, 'w')

This should open your file for writing if it doesn't exist already, and return a file-object. If it does exists, it will print "Ooops" and return None (untested, and based solely on reading the python documentation, so might not be 100% correct).

var token = 'spo';

switch(token){
    case ( (token.match(/spo/) )? token : undefined ) :
       console.log('MATCHED')    
    break;;
    default:
       console.log('NO MATCH')
    break;;
}

--> If the match is made the ternary expression returns the original token
----> The original token is evaluated by case

--> If the match is not made the ternary returns undefined
----> Case evaluates the token against undefined which hopefully your token is not.

The ternary test can be anything for instance in your case

( !!~ base_url_string.indexOf('xxx.dev.yyy.com') )? xxx.dev.yyy.com : undefined 

===========================================

(token.match(/spo/) )? token : undefined ) 

is a ternary expression.

The test in this case is token.match(/spo/) which states the match the string held in token against the regex expression /spo/ ( which is the literal string spo in this case ).

If the expression and the string match it results in true and returns token ( which is the string the switch statement is operating on ).

Obviously token === token so the switch statement is matched and the case evaluated

It is easier to understand if you look at it in layers and understand that the turnery test is evaluated "BEFORE" the switch statement so that the switch statement only sees the results of the test.

TypeScript's relation to JavaScript

TypeScript is a typed superset of JavaScript that compiles to plain JavaScript - typescriptlang.org.

JavaScript is a programming language that is developed by EMCA's Technical Committee 39, which is a group of people composed of many different stakeholders. TC39 is a committee hosted by ECMA: an internal standards organization. JavaScript has many different implementations by many different vendors (e.g. Google, Microsoft, Oracle, etc.). The goal of JavaScript is to be the lingua franca of the web.

TypeScript is a superset of the JavaScript language that has a single open-source compiler and is developed mainly by a single vendor: Microsoft. The goal of TypeScript is to help catch mistakes early through a type system and to make JavaScript development more efficient.

Essentially TypeScript achieves its goals in three ways:

1. Support for modern JavaScript features - The JavaScript language (not the runtime) is standardized through the ECMAScript standards. Not all browsers and JavaScript runtimes support all features of all ECMAScript standards (see this overview). TypeScript allows for the use of many of the latest ECMAScript features and translates them to older ECMAScript targets of your choosing (see the list of compile targets under the --target compiler option). This means that you can safely use new features, like modules, lambda functions, classes, the spread operator and destructuring, while remaining backwards compatible with older browsers and JavaScript runtimes.

2. Advanced type system - The type support is not part of the ECMAScript standard and will likely never be due to the interpreted nature instead of compiled nature of JavaScript. The type system of TypeScript is incredibly rich and includes: interfaces, enums, hybrid types, generics, union/intersection types, access modifiers and much more. The official website of TypeScript gives an overview of these features. Typescript's type system is on-par with most other typed languages and in some cases arguably more powerful.

3. Developer tooling support - TypeScript's compiler can run as a background process to support both incremental compilation and IDE integration such that you can more easily navigate, identify problems, inspect possibilities and refactor your codebase.

TypeScript's relation to other JavaScript targeting languages

TypeScript has a unique philosophy compared to other languages that compile to JavaScript. JavaScript code is valid TypeScript code; TypeScript is a superset of JavaScript. You can almost rename your .js files to .ts files and start using TypeScript (see "JavaScript interoperability" below). TypeScript files are compiled to readable JavaScript, so that migration back is possible and understanding the compiled TypeScript is not hard at all. TypeScript builds on the successes of JavaScript while improving on its weaknesses.

On the one hand, you have future proof tools that take modern ECMAScript standards and compile it down to older JavaScript versions with Babel being the most popular one. On the other hand, you have languages that may totally differ from JavaScript which target JavaScript, like CoffeeScript, Clojure, Dart, Elm, Haxe, Scala.js, and a whole host more (see this list). These languages, though they might be better than where JavaScript's future might ever lead, run a greater risk of not finding enough adoption for their futures to be guaranteed. You might also have more trouble finding experienced developers for some of these languages, though the ones you will find can often be more enthusiastic. Interop with JavaScript can also be a bit more involved, since they are farther removed from what JavaScript actually is.

TypeScript sits in between these two extremes, thus balancing the risk. TypeScript is not a risky choice by any standard. It takes very little effort to get used to if you are familiar with JavaScript, since it is not a completely different language, has excellent JavaScript interoperability support and it has seen a lot of adoption recently.

Optionally static typing and type inference

JavaScript is dynamically typed. This means JavaScript does not know what type a variable is until it is actually instantiated at run-time. This also means that it may be too late. TypeScript adds type support to JavaScript and catches type errors during compilation to JavaScript. Bugs that are caused by false assumptions of some variable being of a certain type can be completely eradicated if you play your cards right (how strict you type your code or if you type your code at all is up to you).

TypeScript makes typing a bit easier and a lot less explicit by the usage of type inference. For example: var x = "hello" in TypeScript is the same as var x : string = "hello". The type is simply inferred from its use. Even it you don't explicitly type the types, they are still there to save you from doing something which otherwise would result in a run-time error.

TypeScript is optionally typed by default. For example function divideByTwo(x) { return x / 2 } is a valid function in TypeScript which can be called with any kind of parameter, even though calling it with a string will obviously result in a runtime error. Just like you are used to in JavaScript. This works, because when no type was explicitly assigned and the type could not be inferred, like in the divideByTwo example, TypeScript will implicitly assign the type any. This means the divideByTwo function's type signature automatically becomes function divideByTwo(x : any) : any. There is a compiler flag to disallow this behavior: --noImplicitAny. Enabling this flag gives you a greater degree of safety, but also means you will have to do more typing.

Types have a cost associated with them. First of all, there is a learning curve, and second of all, of course, it will cost you a bit more time to set up a codebase using proper strict typing too. In my experience, these costs are totally worth it on any serious codebase you are sharing with others. A Large Scale Study of Programming Languages and Code Quality in Github suggests that "statically typed languages, in general, are less defect prone than the dynamic types, and that strong typing is better than weak typing in the same regard".

It is interesting to note that this very same paper finds that TypeScript is less error-prone than JavaScript:

For those with positive coefficients we can expect that the language is associated with, ceteris paribus, a greater number of defect fixes. These languages include C, C++, JavaScript, Objective-C, Php, and Python. The languages Clojure, Haskell, Ruby, Scala, and TypeScript, all have negative coefficients implying that these languages are less likely than the average to result in defect fixing commits.

Enhanced IDE support

The development experience with TypeScript is a great improvement over JavaScript. The IDE is informed in real-time by the TypeScript compiler on its rich type information. This gives a couple of major advantages. For example, with TypeScript, you can safely do refactorings like renames across your entire codebase. Through code completion, you can get inline help on whatever functions a library might offer. No more need to remember them or look them up in online references. Compilation errors are reported directly in the IDE with a red squiggly line while you are busy coding. All in all, this allows for a significant gain in productivity compared to working with JavaScript. One can spend more time coding and less time debugging.

There is a wide range of IDEs that have excellent support for TypeScript, like Visual Studio Code, WebStorm, Atom and Sublime.

Strict null checks

Runtime errors of the form cannot read property 'x' of undefined or undefined is not a function are very commonly caused by bugs in JavaScript code. Out of the box TypeScript already reduces the probability of these kinds of errors occurring, since one cannot use a variable that is not known to the TypeScript compiler (with the exception of properties of any typed variables). It is still possible though to mistakenly utilize a variable that is set to undefined. However, with the 2.0 version of TypeScript you can eliminate these kinds of errors all together through the usage of non-nullable types. This works as follows:

With strict null checks enabled (--strictNullChecks compiler flag) the TypeScript compiler will not allow undefined to be assigned to a variable unless you explicitly declare it to be of nullable type. For example, let x : number = undefined will result in a compile error. This fits perfectly with type theory since undefined is not a number. One can define x to be a sum type of number and undefined to correct this: let x : number | undefined = undefined.

Once a type is known to be nullable, meaning it is of a type that can also be of the value null or undefined, the TypeScript compiler can determine through control flow based type analysis whether or not your code can safely use a variable or not. In other words when you check a variable is undefined through for example an if statement the TypeScript compiler will infer that the type in that branch of your code's control flow is not anymore nullable and therefore can safely be used. Here is a simple example:

let x: number | undefined;
if (x !== undefined) x += 1; // this line will compile, because x is checked.
x += 1; // this line will fail compilation, because x might be undefined.

During the build, 2016 conference co-designer of TypeScript Anders Hejlsberg gave a detailed explanation and demonstration of this feature: video (from 44:30 to 56:30).

Compilation

To use TypeScript you need a build process to compile to JavaScript code. The build process generally takes only a couple of seconds depending of course on the size of your project. The TypeScript compiler supports incremental compilation (--watch compiler flag) so that all subsequent changes can be compiled at greater speed.

The TypeScript compiler can inline source map information in the generated .js files or create separate .map files. Source map information can be used by debugging utilities like the Chrome DevTools and other IDE's to relate the lines in the JavaScript to the ones that generated them in the TypeScript. This makes it possible for you to set breakpoints and inspect variables during runtime directly on your TypeScript code. Source map information works pretty well, it was around long before TypeScript, but debugging TypeScript is generally not as great as when using JavaScript directly. Take the this keyword for example. Due to the changed semantics of the this keyword around closures since ES2015, this may actually exists during runtime as a variable called _this (see this answer). This may confuse you during debugging but generally is not a problem if you know about it or inspect the JavaScript code. It should be noted that Babel suffers the exact same kind of issue.

There are a few other tricks the TypeScript compiler can do, like generating intercepting code based on decorators, generating module loading code for different module systems and parsing JSX. However, you will likely require a build tool besides the Typescript compiler. For example, if you want to compress your code you will have to add other tools to your build process to do so.

There are TypeScript compilation plugins available for Webpack, Gulp, Grunt and pretty much any other JavaScript build tool out there. The TypeScript documentation has a section on integrating with build tools covering them all. A linter is also available in case you would like even more build time checking. There are also a great number of seed projects out there that will get you started with TypeScript in combination with a bunch of other technologies like Angular 2, React, Ember, SystemJS, Webpack, Gulp, etc.

JavaScript interoperability

Since TypeScript is so closely related to JavaScript it has great interoperability capabilities, but some extra work is required to work with JavaScript libraries in TypeScript. TypeScript definitions are needed so that the TypeScript compiler understands that function calls like _.groupBy or angular.copy or $.fadeOut are not in fact illegal statements. The definitions for these functions are placed in .d.ts files.

The simplest form a definition can take is to allow an identifier to be used in any way. For example, when using Lodash, a single line definition file declare var _ : any will allow you to call any function you want on _, but then, of course, you are also still able to make mistakes: _.foobar() would be a legal TypeScript call, but is, of course, an illegal call at run-time. If you want proper type support and code completion your definition file needs to to be more exact (see lodash definitions for an example).

Npm modules that come pre-packaged with their own type definitions are automatically understood by the TypeScript compiler (see documentation). For pretty much any other semi-popular JavaScript library that does not include its own definitions somebody out there has already made type definitions available through another npm module. These modules are prefixed with "@types/" and come from a Github repository called DefinitelyTyped.

There is one caveat: the type definitions must match the version of the library you are using at run-time. If they do not, TypeScript might disallow you from calling a function or dereferencing a variable that exists or allow you to call a function or dereference a variable that does not exist, simply because the types do not match the run-time at compile-time. So make sure you load the right version of the type definitions for the right version of the library you are using.

To be honest, there is a slight hassle to this and it may be one of the reasons you do not choose TypeScript, but instead go for something like Babel that does not suffer from having to get type definitions at all. On the other hand, if you know what you are doing you can easily overcome any kind of issues caused by incorrect or missing definition files.

Converting from JavaScript to TypeScript

Any .js file can be renamed to a .ts file and ran through the TypeScript compiler to get syntactically the same JavaScript code as an output (if it was syntactically correct in the first place). Even when the TypeScript compiler gets compilation errors it will still produce a .js file. It can even accept .js files as input with the --allowJs flag. This allows you to start with TypeScript right away. Unfortunately, compilation errors are likely to occur in the beginning. One does need to remember that these are not show-stopping errors like you may be used to with other compilers.

The compilation errors one gets in the beginning when converting a JavaScript project to a TypeScript project are unavoidable by TypeScript's nature. TypeScript checks all code for validity and thus it needs to know about all functions and variables that are used. Thus type definitions need to be in place for all of them otherwise compilation errors are bound to occur. As mentioned in the chapter above, for pretty much any JavaScript framework there are .d.ts files that can easily be acquired with the installation of DefinitelyTyped packages. It might, however, be that you've used some obscure library for which no TypeScript definitions are available or that you've polyfilled some JavaScript primitives. In that case, you must supply type definitions for these bits for the compilation errors to disappear. Just create a .d.ts file and include it in the tsconfig.json's files array, so that it is always considered by the TypeScript compiler. In it declare those bits that TypeScript does not know about as type any. Once you've eliminated all errors you can gradually introduce typing to those parts according to your needs.

Some work on (re)configuring your build pipeline will also be needed to get TypeScript into the build pipeline. As mentioned in the chapter on compilation there are plenty of good resources out there and I encourage you to look for seed projects that use the combination of tools you want to be working with.

The biggest hurdle is the learning curve. I encourage you to play around with a small project at first. Look how it works, how it builds, which files it uses, how it is configured, how it functions in your IDE, how it is structured, which tools it uses, etc. Converting a large JavaScript codebase to TypeScript is doable when you know what you are doing. Read this blog for example on converting 600k lines to typescript in 72 hours). Just make sure you have a good grasp of the language before you make the jump.

Adoption

TypeScript is open-source (Apache 2 licensed, see GitHub) and backed by Microsoft. Anders Hejlsberg, the lead architect of C# is spearheading the project. It's a very active project; the TypeScript team has been releasing a lot of new features in the last few years and a lot of great ones are still planned to come (see the roadmap).

Some facts about adoption and popularity:

• In the 2017 StackOverflow developer survey TypeScript was the most popular JavaScript transpiler (9th place overall) and won third place in the most loved programming language category.
• In the 2018 state of js survey TypeScript was declared as one of the two big winners in the JavaScript flavors category (with ES6 being the other).
• In the 2019 StackOverlow deverloper survey TypeScript rose to the 9th place of most popular languages amongst professional developers, overtaking both C and C++. It again took third place amongst most the most loved languages.

Regex.Split("abc][rfd][5][,][.", @"\]\]");

As you can see by reading the other answers, there are a lot of options available. If you are just doing < 10k rows you should go with the second option.

In short, for approx > 10k all the way to say a <100k. It is kind of a gray area. A lot of old geezers will bark at big rollback segments. But honestly hardware and software have made amazing progress to where you may be able to get away with option 2 for a lot of records if you only run the code a few times. Otherwise you should probably commit every 1k-10k or so rows. Here is a snippet that I use. I like it because it is short and I don't have to declare a cursor. Plus it has the benefits of bulk collect and forall.

begin
    for r in (select rownum rn, t.* from foo t) loop
        insert into bar (A,B,C) values (r.A,r.B,r.C);
        if mod(rn,1000)=0 then
            commit;
        end if;
    end;
    commit;
end;

I found this link from the oracle site that illustrates the options in more detail.

select * from all_users

This will work for sure

I don't have enough reputation to add a comment on the answer from pomber so I'm posting another answer. Using pomber's approach I kept receiving a "400 Bad Request" response from an API I was POSTing my JSON request to (Visual Studio 2017, .NET 4.6.2). Eventually the problem was traced to the "Content-Type" header produced by StringContent() being incorrect (see https://github.com/dotnet/corefx/issues/7864).

tl;dr

Use pomber's answer with an extra line to correctly set the header on the request:

var content = new StringContent(jsonObject.ToString(), Encoding.UTF8, "application/json");
content.Headers.ContentType = new MediaTypeHeaderValue("application/json");
var result = client.PostAsync(url, content).Result;

Swift 4* and above you can try this also:

func leftPadding(valueString: String, toLength: Int, withPad: String = " ") -> String {
        guard toLength > valueString.count else { return valueString }
        
        let padding = String(repeating: withPad, count: toLength - valueString.count)
        return padding + valueString
    }

call the function:

leftPadding(valueString: "12", toLength: 5, withPad: "0")

Output: "00012"

"XmlWriter and lower ASCII characters" worked for me

string code = Regex.Replace(item.Code, @"[\u0000-\u0008,\u000B,\u000C,\u000E-\u001F]", "");

lost a couple of hours to this problem too. got it going though:

"access denied" in my case really did mean "access denied". mssqlstudio's user account on my windows device did NOT have full control of the folder specified in the error message. i gave it full control. access was no longer denied and the restore succeeded.

why was the folder locked up for studio ? who knows ? i got enough questions to deal with as it is without trying to answer more.

As of JQuery 1.7 you might want to use the on method instead

$(function(){
    $(document).on("cut copy paste","#txtInput",function(e) {
        e.preventDefault();
    });
});

I'm not sure how necessary this is, and it adds a call to getElementById, but if you're really keen on getting inline JavaScript out of your code, you can pass it as an HTML attribute, namely:

<span class="metadata" id="metadata-size-of-widget" title="<?php echo json_encode($size_of_widget) ?>"></span>

And then in your JavaScript:

var size_of_widget = document.getElementById("metadata-size-of-widget").title;

if you install the maven with the brew

you can type the command("mvn -v") in Terminal

see Maven home detail

mvn -v
Apache Maven 3.5.0 (ff8f5e7444045639af65f6095c62210b5713f426; 2017-04-04T03:39:06+08:00)
Maven home: /usr/local/Cellar/maven/3.5.0/libexec
Java version: 1.8.0_121, vendor: Oracle Corporation
Java home: /Library/Java/JavaVirtualMachines/jdk1.8.0_121.jdk/Contents/Home/jre
Default locale: zh_CN, platform encoding: UTF-8
OS name: "mac os x", version: "10.11.5", arch: "x86_64", family: "mac"

I have faced this issue many times. The root problem being

1. The target sdk version is not selected in the project settings

or

1. The file default.properties (next to manifest.xml) is either missing or min sdk level not set.

Check those two and do a clean build as suggested in earlier options it should work fine.

Check for errors in "Problems" or "Console" tab.

Lastly : Do you have / eclipse has write permissions to the project folder? (also less probable one is disk space)

Yes You Can!

I worked on a project that did that (see comment). Unfortunately no code samples from that one, but googling revealed these:

How you can integrate data from several Web services using Excel and VBA

STEP BY STEP: Consuming Web Services through VBA (Excel or Word)

VBA: Consume Soap Web Services

Here's an example that only uses a Left join and I believe is more efficient than any group by method out there: ExchangeCore Blog

SELECT t1.*
FROM TrainTable t1 LEFT JOIN TrainTable t2
ON (t1.Train = t2.Train AND t1.Time < t2.Time)
WHERE t2.Time IS NULL;

You could create a basket service. And generally in JS you use objects instead of lots of parameters.

Here's an example: http://jsfiddle.net/2MbZY/

var app = angular.module('myApp', []);

app.factory('basket', function() {
    var items = [];
    var myBasketService = {};

    myBasketService.addItem = function(item) {
        items.push(item);
    };
    myBasketService.removeItem = function(item) {
        var index = items.indexOf(item);
        items.splice(index, 1);
    };
    myBasketService.items = function() {
        return items;
    };

    return myBasketService;
});

function MyCtrl($scope, basket) {
    $scope.newItem = {};
    $scope.basket = basket;    
}

Your code has no problem. It does print the way you want. Alternatively, you can do this:

printf("%04x",a);

A2DD.h

class A2DD
{
  private:
  int gx;
  int gy;

  public:
  A2DD(int x,int y);

  int getSum();
};

A2DD.cpp

  A2DD::A2DD(int x,int y)
  {
    gx = x;
    gy = y;
  }

  int A2DD::getSum()
  {
    return gx + gy;
  }

The idea is to keep all function signatures and members in the header file.
This will allow other project files to see how the class looks like without having to know the implementation.

And besides that, you can then include other header files in the implementation instead of the header. This is important because whichever headers are included in your header file will be included (inherited) in any other file that includes your header file.

Why does this error occur?

Because you tried to access an element in a collection, using a numeric index that exceeds the collection's boundaries.

The first element in a collection is generally located at index 0. The last element is at index n-1, where n is the Size of the collection (the number of elements it contains). If you attempt to use a negative number as an index, or a number that is larger than Size-1, you're going to get an error.

How indexing arrays works

When you declare an array like this:

var array = new int[6]

The first and last elements in the array are

var firstElement = array[0];
var lastElement = array[5];

So when you write:

var element = array[5];

you are retrieving the sixth element in the array, not the fifth one.

Typically, you would loop over an array like this:

for (int index = 0; index < array.Length; index++)
{
    Console.WriteLine(array[index]);
}

This works, because the loop starts at zero, and ends at Length-1 because index is no longer less than Length.

This, however, will throw an exception:

for (int index = 0; index <= array.Length; index++)
{
    Console.WriteLine(array[index]);
}

Notice the <= there? index will now be out of range in the last loop iteration, because the loop thinks that Length is a valid index, but it is not.

How other collections work

Lists work the same way, except that you generally use Count instead of Length. They still start at zero, and end at Count - 1.

for (int index = 0; i < list.Count; index++)
{
    Console.WriteLine(list[index]);
} 

However, you can also iterate through a list using foreach, avoiding the whole problem of indexing entirely:

foreach (var element in list)
{
    Console.WriteLine(element.ToString());
}

You cannot index an element that hasn't been added to a collection yet.

var list = new List<string>();
list.Add("Zero");
list.Add("One");
list.Add("Two");
Console.WriteLine(list[3]);  // Throws exception.

To see if a dataframe is empty, I argue that one should test for the length of a dataframe's columns index:

if len(df.columns) == 0: 1

Reason:

According to the Pandas Reference API, there is a distinction between:

• an empty dataframe with 0 rows and 0 columns
• an empty dataframe with rows containing NaN hence at least 1 column

Arguably, they are not the same. The other answers are imprecise in that df.empty, len(df), or len(df.index) make no distinction and return index is 0 and empty is True in both cases.

Examples

Example 1: An empty dataframe with 0 rows and 0 columns

In [1]: import pandas as pd
        df1 = pd.DataFrame()
        df1
Out[1]: Empty DataFrame
        Columns: []
        Index: []

In [2]: len(df1.index)  # or len(df1)
Out[2]: 0

In [3]: df1.empty
Out[3]: True

Example 2: A dataframe which is emptied to 0 rows but still retains n columns

In [4]: df2 = pd.DataFrame({'AA' : [1, 2, 3], 'BB' : [11, 22, 33]})
        df2
Out[4]:    AA  BB
        0   1  11
        1   2  22
        2   3  33

In [5]: df2 = df2[df2['AA'] == 5]
        df2
Out[5]: Empty DataFrame
        Columns: [AA, BB]
        Index: []

In [6]: len(df2.index)  # or len(df2)
Out[6]: 0

In [7]: df2.empty
Out[7]: True

Now, building on the previous examples, in which the index is 0 and empty is True. When reading the length of the columns index for the first loaded dataframe df1, it returns 0 columns to prove that it is indeed empty.

In [8]: len(df1.columns)
Out[8]: 0

In [9]: len(df2.columns)
Out[9]: 2

Critically, while the second dataframe df2 contains no data, it is not completely empty because it returns the amount of empty columns that persist.

Why it matters

Let's add a new column to these dataframes to understand the implications:

# As expected, the empty column displays 1 series
In [10]: df1['CC'] = [111, 222, 333]
         df1
Out[10]:    CC
         0 111
         1 222
         2 333
In [11]: len(df1.columns)
Out[11]: 1

# Note the persisting series with rows containing `NaN` values in df2
In [12]: df2['CC'] = [111, 222, 333]
         df2
Out[12]:    AA  BB   CC
         0 NaN NaN  111
         1 NaN NaN  222
         2 NaN NaN  333
In [13]: len(df2.columns)
Out[13]: 3

It is evident that the original columns in df2 have re-surfaced. Therefore, it is prudent to instead read the length of the columns index with len(pandas.core.frame.DataFrame.columns) to see if a dataframe is empty.

Practical solution

# New dataframe df
In [1]: df = pd.DataFrame({'AA' : [1, 2, 3], 'BB' : [11, 22, 33]})
        df
Out[1]:    AA  BB
        0   1  11
        1   2  22
        2   3  33

# This data manipulation approach results in an empty df
# because of a subset of values that are not available (`NaN`)
In [2]: df = df[df['AA'] == 5]
        df
Out[2]: Empty DataFrame
        Columns: [AA, BB]
        Index: []

# NOTE: the df is empty, BUT the columns are persistent
In [3]: len(df.columns)
Out[3]: 2

# And accordingly, the other answers on this page
In [4]: len(df.index)  # or len(df)
Out[4]: 0

In [5]: df.empty
Out[5]: True

# SOLUTION: conditionally check for empty columns
In [6]: if len(df.columns) != 0:  # <--- here
            # Do something, e.g. 
            # drop any columns containing rows with `NaN`
            # to make the df really empty
            df = df.dropna(how='all', axis=1)
        df
Out[6]: Empty DataFrame
        Columns: []
        Index: []

# Testing shows it is indeed empty now
In [7]: len(df.columns)
Out[7]: 0

Adding a new data series works as expected without the re-surfacing of empty columns (factually, without any series that were containing rows with only NaN):

In [8]: df['CC'] = [111, 222, 333]
         df
Out[8]:    CC
         0 111
         1 222
         2 333
In [9]: len(df.columns)
Out[9]: 1

Step1 Check your jdk is installed. and variable path is setted. Step2 unistall your eclipes and reinstall it. other wise It will continue to be a problem

... WHERE date_column >='2012-12-25' AND date_column <'2012-12-26' may potentially work better(if you have an index on date_column) than DATE.

Guava, a very useful core library by Google, has a nice and useful API to avoid nulls. I find UsingAndAvoidingNullExplained very helpful.

As explained in the wiki:

Optional<T> is a way of replacing a nullable T reference with a non-null value. An Optional may either contain a non-null T reference (in which case we say the reference is "present"), or it may contain nothing (in which case we say the reference is "absent"). It is never said to "contain null."

Usage:

Optional<Integer> possible = Optional.of(5);
possible.isPresent(); // returns true
possible.get(); // returns 5

Another solution if the text is not the same to the enumeration value:

public enum Blah {
    A("text1"),
    B("text2"),
    C("text3"),
    D("text4");

    private String text;

    Blah(String text) {
        this.text = text;
    }

    public String getText() {
        return this.text;
    }

    public static Blah fromString(String text) {
        for (Blah b : Blah.values()) {
            if (b.text.equalsIgnoreCase(text)) {
                return b;
            }
        }
        return null;
    }
}

I ran into this in IntelliJ and fixed it by adding the following to my pom:

<!-- logging dependencies -->
    <dependency>
        <groupId>ch.qos.logback</groupId>
        <artifactId>logback-classic</artifactId>
        <version>${logback.version}</version>
        <exclusions>
            <exclusion>
                <!-- Defined below -->
                <artifactId>slf4j-api</artifactId>
                <groupId>org.slf4j</groupId>
            </exclusion>
        </exclusions>
    </dependency>

    <dependency>
        <groupId>org.slf4j</groupId>
        <artifactId>slf4j-api</artifactId>
        <version>${slf4j.version}</version>
    </dependency>

SAP is really a big Company that offers incredible solutions oriented to medium-large companies.

Actually, I can say that the main IT products are: ERP, WEB, Human Resources, Integration, BI, Reports, Machine Learning, Mobile, Cloud, Robotics, and so on.

On the cloud, you can even find solutions using Cloud Foundry, NodeJS, HTML5, Java, etc.

It's really huge the solutions that offers to their customers.

I'm guessing from your last question, asked 20 minutes before this one, that you are trying to parse (read and convert) the XML found through using GeoNames' FindNearestAddress.

If your XML is in a string variable called txt and looks like this:

<address>
  <street>Roble Ave</street>
  <mtfcc>S1400</mtfcc>
  <streetNumber>649</streetNumber>
  <lat>37.45127</lat>
  <lng>-122.18032</lng>
  <distance>0.04</distance>
  <postalcode>94025</postalcode>
  <placename>Menlo Park</placename>
  <adminCode2>081</adminCode2>
  <adminName2>San Mateo</adminName2>
  <adminCode1>CA</adminCode1>
  <adminName1>California</adminName1>
  <countryCode>US</countryCode>
</address>

Then you can parse the XML with Javascript DOM like this:

if (window.DOMParser)
{
    parser = new DOMParser();
    xmlDoc = parser.parseFromString(txt, "text/xml");
}
else // Internet Explorer
{
    xmlDoc = new ActiveXObject("Microsoft.XMLDOM");
    xmlDoc.async = false;
    xmlDoc.loadXML(txt);
}

And get specific values from the nodes like this:

//Gets house address number
xmlDoc.getElementsByTagName("streetNumber")[0].childNodes[0].nodeValue;

//Gets Street name
xmlDoc.getElementsByTagName("street")[0].childNodes[0].nodeValue;

//Gets Postal Code
xmlDoc.getElementsByTagName("postalcode")[0].childNodes[0].nodeValue;

JSFiddle

Feb. 2019 edit:

In response to @gaugeinvariante's concerns about xml with Namespace prefixes. Should you have a need to parse xml with Namespace prefixes, everything should work almost identically:

NOTE: this will only work in browsers that support xml namespace prefixes such as Microsoft Edge

// XML with namespace prefixes 's', 'sn', and 'p' in a variable called txt_x000D_
txt = `_x000D_
<address xmlns:p='example.com/postal' xmlns:s='example.com/street' xmlns:sn='example.com/streetNum'>_x000D_
  <s:street>Roble Ave</s:street>_x000D_
  <sn:streetNumber>649</sn:streetNumber>_x000D_
  <p:postalcode>94025</p:postalcode>_x000D_
</address>`;_x000D_
_x000D_
//Everything else the same_x000D_
if (window.DOMParser)_x000D_
{_x000D_
    parser = new DOMParser();_x000D_
    xmlDoc = parser.parseFromString(txt, "text/xml");_x000D_
}_x000D_
else // Internet Explorer_x000D_
{_x000D_
    xmlDoc = new ActiveXObject("Microsoft.XMLDOM");_x000D_
    xmlDoc.async = false;_x000D_
    xmlDoc.loadXML(txt);_x000D_
}_x000D_
_x000D_
//The prefix should not be included when you request the xml namespace_x000D_
//Gets "streetNumber" (note there is no prefix of "sn"_x000D_
console.log(xmlDoc.getElementsByTagName("streetNumber")[0].childNodes[0].nodeValue);_x000D_
_x000D_
//Gets Street name_x000D_
console.log(xmlDoc.getElementsByTagName("street")[0].childNodes[0].nodeValue);_x000D_
_x000D_
//Gets Postal Code_x000D_
console.log(xmlDoc.getElementsByTagName("postalcode")[0].childNodes[0].nodeValue);

It works:

Bitmap bitmap = BitmapFactory.decodeFile(filePath);

I had this similar issue. I wanted to set a class after looking at multiple expressions. ngClass can evaluate a method inside the component code and tell you what to do.

So inside an *ngFor:

<div [ngClass]="{'shrink': shouldShrink(a.category1, a.category2), 'showAll': section == 'allwork' }">{{a.listing}}</div>

And inside the component:

section = 'allwork';

shouldShrink(cat1, cat2) {
    return this.section === cat1 || this.section === cat2 ? false : true;
}

Here I need to calculate if i should shrink a div based on if a 2 different categories have matched what the selected category is. And it works. So from there you can computer a true/false for the [ngClass] based on what your method returns given the inputs.

I'm little late to the party, but for anyone like me that came from a Google search and didn't find the right answer. Don't get me wrong there are good answers here, but not exactly what I was looking for, without further ado, here is what I did:

$(document).ready(function() {
    
    var $deleteButton = $('.deleteItem');

    $deleteButton.on('click', function(event) {
      event.preventDefault();

      var $button = $(this);

      if(confirm('Are you sure about this ?')) {

        var $item = $button.closest('tr.item');

        $item.addClass('removed-item')
        
            .one('webkitAnimationEnd oanimationend msAnimationEnd animationend', function(e) {
          
                $(this).remove();
        });
      }
      
    });
    
});

/**
 * Credit to Sara Soueidan
 * @link https://github.com/SaraSoueidan/creative-list-effects/blob/master/css/styles-4.css
 */

.removed-item {
    -webkit-animation: removed-item-animation .6s cubic-bezier(.55,-0.04,.91,.94) forwards;
    -o-animation: removed-item-animation .6s cubic-bezier(.55,-0.04,.91,.94) forwards;
    animation: removed-item-animation .6s cubic-bezier(.55,-0.04,.91,.94) forwards
}

@keyframes removed-item-animation {
    from {
        opacity: 1;
        -webkit-transform: scale(1);
        -ms-transform: scale(1);
        -o-transform: scale(1);
        transform: scale(1)
    }

    to {
        -webkit-transform: scale(0);
        -ms-transform: scale(0);
        -o-transform: scale(0);
        transform: scale(0);
        opacity: 0
    }
}

@-webkit-keyframes removed-item-animation {
    from {
        opacity: 1;
        -webkit-transform: scale(1);
        transform: scale(1)
    }

    to {
        -webkit-transform: scale(0);
        transform: scale(0);
        opacity: 0
    }
}

@-o-keyframes removed-item-animation {
    from {
        opacity: 1;
        -o-transform: scale(1);
        transform: scale(1)
    }

    to {
        -o-transform: scale(0);
        transform: scale(0);
        opacity: 0
    }
}

<!DOCTYPE html>
<html>
<head>
  <meta charset="utf-8">
  <meta name="viewport" content="width=device-width">
  <title>JS Bin</title>
  <link href="https://maxcdn.bootstrapcdn.com/bootstrap/3.3.6/css/bootstrap.min.css" rel="stylesheet"/>
</head>
<body>
  
  <table class="table table-striped table-bordered table-hover">
    <thead>
      <tr>
        <th>id</th>
        <th>firstname</th>
        <th>lastname</th>
        <th>@twitter</th>
        <th>action</th>
      </tr>
    </thead>
    <tbody>
      
      <tr class="item">
        <td>1</td>
        <td>Nour-Eddine</td>
        <td>ECH-CHEBABY</td>
        <th>@__chebaby</th>
        <td><button class="btn btn-danger deleteItem">Delete</button></td>
      </tr>
      
      <tr class="item">
        <td>2</td>
        <td>John</td>
        <td>Doe</td>
        <th>@johndoe</th>
        <td><button class="btn btn-danger deleteItem">Delete</button></td>
      </tr>
      
      <tr class="item">
        <td>3</td>
        <td>Jane</td>
        <td>Doe</td>
        <th>@janedoe</th>
        <td><button class="btn btn-danger deleteItem">Delete</button></td>
      </tr>
    </tbody>
  </table>
  
<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>


</body>
</html>

You can use the built-in forEach function for arrays.

Like this:

//this sets all product descriptions to a max length of 10 characters
data.products.forEach( (element) => {
    element.product_desc = element.product_desc.substring(0,10);
});

Your version wasn't wrong though. It should look more like this:

for(let i=0; i<data.products.length; i++){
    console.log(data.products[i].product_desc); //use i instead of 0
}

You can use Apache Subversion. It is owner of subversion . You can download from here . After install it, you have to restart pc to use svn from command line.

These are all good answers. I would just like to add an execution example when passing objects by value vs by reference:

#include <iostream>

using namespace std;

// Base class
class A {
public:
    A() {}
    A(const A& a) {
        cout << "'A' copy constructor" << endl;
    }
    virtual void run() const { cout << "I am an 'A'" << endl; }
};

// Derived class
class B: public A {
public:
    B():A() {}
    B(const B& a):A(a) {
        cout << "'B' copy constructor" << endl;
    }
    virtual void run() const { cout << "I am a 'B'" << endl; }
};

void g(const A & a) {
    a.run();
}

void h(const A a) {
    a.run();
}

int main() {
    cout << "Call by reference" << endl;
    g(B());
    cout << endl << "Call by copy" << endl;
    h(B());
}

The output is:

Call by reference
I am a 'B'

Call by copy
'A' copy constructor
I am an 'A'

with CTE as 
(select Person, 
[Group], Age, RN= Row_Number() 
over(partition by [Group] 
order by Age desc) 
from yourtable)`


`select Person, Age from CTE where RN = 1`

you can also use this code...

datePicker = (DatePicker) findViewById(R.id.schedule_datePicker);
int day = datePicker.getDayOfMonth();
int month = datePicker.getMonth() + 1;
int year = datePicker.getYear();


SimpleDateFormat dateFormatter = new SimpleDateFormat("MM-dd-yyyy");
Date d = new Date(year, month, day);
String strDate = dateFormatter.format(d);

Consider this implementation of foo():

public void foo(final String a) {
    SwingUtilities.invokeLater(new Runnable() {
        public void run() {
            System.out.print(a);
        }
    }); 
}

Because the Runnable instance would outlive the method, this wouldn't compile without the final keyword -- final tells the compiler that it's safe to take a copy of the reference (to refer to it later). Thus, it's the reference that's considered final, not the value. In other words: As a caller, you can't mess anything up...

data will return you a string representation of a list, but it is actually still a string. Just check the type of data with type(data). That means if you try using indexing on this string representation of a list as such data['fruits'][0], it will return you "[" as it is the first character of data['fruits']

You can do json.loads(data['fruits']) to convert it back to a Python list so that you can interact with regular list indexing. There are 2 other ways you can convert it back to a Python list suggested here

The dot itself is not an operator, .^ is.

The .^ is a pointwise¹ (i.e. element-wise) power, as .* is the pointwise product.

.^ Array power. A.^B is the matrix with elements A(i,j) to the B(i,j) power. The sizes of A and B must be the same or be compatible.

C.f.

• "Array vs. Matrix Operations": https://mathworks.com/help/matlab/matlab_prog/array-vs-matrix-operations.html
• "Pointwise": http://en.wikipedia.org/wiki/Pointwise
• "Element-Wise Operations": http://www.glue.umd.edu/afs/glue.umd.edu/system/info/olh/Numerical/Matlab_Matrix_Manipulation_Software/Matrix_Vector_Operations/elementwise

¹) Hence the dot.

I needed this peace of code as a subquery with some data filter before aggregation based on the outer most query but I wasn't able to do this using the chosen answer code because this filter should go in the inner most select (third level query) and the filter params was in the outer most select (first level query), which gave me the error ORA-00904: "TB_OUTERMOST"."COL": invalid identifier as the ANSI SQL states that table references (correlation names) are scoped to just one level deep.

I needed a solution with no levels of subquery and this one below worked great for me:

with

demotable as
(
  select 1 group_id, 'David'   name from dual union all
  select 1 group_id, 'John'    name from dual union all
  select 1 group_id, 'Alan'    name from dual union all
  select 1 group_id, 'David'   name from dual union all
  select 2 group_id, 'Julie'   name from dual union all
  select 2 group_id, 'Charlie' name from dual
)

select distinct 
  group_id, 
  listagg(name, ',') within group (order by name) over (partition by group_id) names
from demotable
-- where any filter I want
group by group_id, name
order by group_id;

A Meteor app does not, by default, add any X-Powered-By headers to HTTP responses, as you might find in various PHP apps. The headers look like:

$ curl -I https://atmosphere.meteor.com  HTTP/1.1 200 OK content-type: text/html; charset=utf-8 date: Tue, 31 Dec 2013 23:12:25 GMT connection: keep-alive 

However, this doesn't mask that Meteor was used. Viewing the source of a Meteor app will look very distinctive.

<script type="text/javascript"> __meteor_runtime_config__ = {"meteorRelease":"0.6.3.1","ROOT_URL":"http://atmosphere.meteor.com","serverId":"62a4cf6a-3b28-f7b1-418f-3ddf038f84af","DDP_DEFAULT_CONNECTION_URL":"ddp+sockjs://ddp--****-atmosphere.meteor.com/sockjs"}; </script> 

If you're trying to avoid people being able to tell you are using Meteor even by viewing source, I don't think that's possible.

if you are using sql server, use brackets or single quotes around alias name in a query you have in code.

Update : In angular 7, they are the same as 6

In angular 6

the complete answer found in live example

  /** POST: add a new hero to the database */
  addHero (hero: Hero): Observable<Hero> {
 return this.http.post<Hero>(this.heroesUrl, hero, httpOptions)
  .pipe(
    catchError(this.handleError('addHero', hero))
  );
}
  /** GET heroes from the server */
 getHeroes (): Observable<Hero[]> {
return this.http.get<Hero[]>(this.heroesUrl)
  .pipe(
    catchError(this.handleError('getHeroes', []))
  );
}

it's because of pipeable/lettable operators which now angular is able to use tree-shakable and remove unused imports and optimize the app

some rxjs functions are changed

do -> tap
catch -> catchError
switch -> switchAll
finally -> finalize

more in MIGRATION

and Import paths

For JavaScript developers, the general rule is as follows:

rxjs: Creation methods, types, schedulers and utilities

import { Observable, Subject, asapScheduler, pipe, of, from, interval, merge, fromEvent } from 'rxjs';

rxjs/operators: All pipeable operators:

import { map, filter, scan } from 'rxjs/operators';

rxjs/webSocket: The web socket subject implementation

import { webSocket } from 'rxjs/webSocket';

rxjs/ajax: The Rx ajax implementation

import { ajax } from 'rxjs/ajax';

rxjs/testing: The testing utilities

import { TestScheduler } from 'rxjs/testing';

and for backward compatability you can use rxjs-compat

You can go to AdoptOpenJDK to download your binaries for all platforms provided by a great community.

Run this command :

    sudo chown -R yourUser /home/yourUser/.composer

You can copy an iterator to a new list like this:

Iterator<String> iter = list.iterator();
List<String> copy = new ArrayList<String>();
while (iter.hasNext())
    copy.add(iter.next());

That's assuming that the list contains strings. There really isn't a faster way to recreate a list from an iterator, you're stuck with traversing it by hand and copying each element to a new list of the appropriate type.

EDIT :

Here's a generic method for copying an iterator to a new list in a type-safe way:

public static <T> List<T> copyIterator(Iterator<T> iter) {
    List<T> copy = new ArrayList<T>();
    while (iter.hasNext())
        copy.add(iter.next());
    return copy;
}

Use it like this:

List<String> list = Arrays.asList("1", "2", "3");
Iterator<String> iter = list.iterator();
List<String> copy = copyIterator(iter);
System.out.println(copy);
> [1, 2, 3]

Add below setting to .eslintrc.js / .eslintrc.json to ignore these errors:

  rules: {
    // suppress errors for missing 'import React' in files
   "react/react-in-jsx-scope": "off",
    // allow jsx syntax in js files (for next.js project)
   "react/jsx-filename-extension": [1, { "extensions": [".js", ".jsx"] }], //should add ".ts" if typescript project
  }

Why? If you're using NEXT.js then you do not require to import React at top of files, nextjs does that for you.

You can run the following and filter the size only. If your file was called somefilename you can do the following

while :; do ls -lh | awk '/some*/{print $5}'; sleep 5; done

One of the many ideas.

Yes, this is something that you should worry about. Check the length of your objects with nrow(). R can auto-replicate objects so that they're the same length if they differ, which means you might be performing operations on mismatched data.

In this case you have an obvious flaw in that your subtracting aggregated data from raw data. These will definitely be of different lengths. I suggest that you merge them as time series (using the dates), then locf(), then do your subtraction. Otherwise merge them by truncating the original dates to the same interval as the aggregated series. Just be very careful that you don't drop observations.

Lastly, as some general advice as you get started: look at the result of your computations to see if they make sense. You might even pull them into a spreadsheet and replicate the results.

What error is it giving you?

If you do exactly this:

data = json.loads('{"lat":444, "lon":555}')

Then:

data['lat']

SHOULD NOT give you any error at all.

In Gradle implement this library :

implementation 'com.android.support:appcompat-v7:SDK_VER'
implementation 'com.android.support:design:SDK_VER'
implementation 'com.android.support:support-v4:SDK_VER'
implementation 'com.android.support:support-v13:SDK_VER'
implementation 'com.android.support:recyclerview-v7:SDK_VER'

In XML mention like this :

<android.support.v7.widget.RecyclerView
  android:layout_width="match_parent"
  android:layout_height="wrap_content"
  android:id="@+id/recyclerView"/>

In Fragment we use recyclerView like this :

@Override
    public View onCreateView(LayoutInflater inflater, ViewGroup container,
                             Bundle savedInstanceState) {
        // Inflate the layout for this fragment
       View rootView = inflater.inflate(R.layout.YOUR_LAYOUT_NAME, container, false);

       RecyclerView recyclerView = (RecyclerView) rootView.findViewById(R.id.recyclerView);
        RecyclerView.LayoutManager layoutManager = new LinearLayoutManager(getActivity(), LinearLayoutManager.VERTICAL, false);
        recyclerView.setLayoutManager(layoutManager);
        APICallMethod();
        YOURADAPTER = new YOURADAPTER(getActivity(), YOUR_LIST); // you can use that adapter after for loop in response(APICALLMETHOD)
        recyclerView.setAdapter(YOURADAPTER);
        return rootView;
    }

In Activity we use RecyclerView like this :

@Override
    protected void onCreate(Bundle savedInstanceState) {
        super.onCreate(savedInstanceState);
        setContentView(R.layout.YOUR_LAYOUT_NAME);

        RecyclerView recyclerView = (RecyclerView) findViewById(R.id.recyclerView);
        RecyclerView.LayoutManager layoutManager = new LinearLayoutManager(getActivity(), LinearLayoutManager.VERTICAL, false);
        recyclerView.setLayoutManager(layoutManager);
        APICallMethod();
        YOURADAPTER = new YOURADAPTER(ACTIVITY_NAME.this, YOUR_LIST); // you can use that adapter after for loop in response(APICALLMETHOD)
        recyclerView.setAdapter(YOURADAPTER);
   }

if you need horizontal RecyclerView do this :

RecyclerView recyclerView = (RecyclerView) findViewById(R.id.recyclerView);
        RecyclerView.LayoutManager layoutManager = new LinearLayoutManager(getActivity(), LinearLayoutManager.HORIZONTAL, false);
        recyclerView.setLayoutManager(layoutManager);
        APICallMethod();
        YOURADAPTER = new YOURADAPTER(ACTIVITY_NAME.this, YOUR_LIST); // you can use that adapter after for loop in response(APICALLMETHOD)
        recyclerView.setAdapter(YOURADAPTER);

if you want to use GridLayoutManager using RecyclerView use like this :

        RecyclerView recyclerView = findViewById(R.id.rvNumbers);
        recyclerView.setLayoutManager(new GridLayoutManager(this, 3)); // 3 is number of columns.
        adapter = new MyRecyclerViewAdapter(this, data);
        recyclerView.setAdapter(adapter);

This is a matplotlib question, and you can get around this by using a backend that doesn't display to the user, e.g. 'Agg':

import matplotlib
matplotlib.use('Agg')
import matplotlib.pyplot as plt

plt.plot([1,2,3])
plt.savefig('/tmp/test.png')

EDIT: If you don't want to lose the ability to display plots, turn off Interactive Mode, and only call plt.show() when you are ready to display the plots:

import matplotlib.pyplot as plt

# Turn interactive plotting off
plt.ioff()

# Create a new figure, plot into it, then close it so it never gets displayed
fig = plt.figure()
plt.plot([1,2,3])
plt.savefig('/tmp/test0.png')
plt.close(fig)

# Create a new figure, plot into it, then don't close it so it does get displayed
plt.figure()
plt.plot([1,3,2])
plt.savefig('/tmp/test1.png')

# Display all "open" (non-closed) figures
plt.show()

apparently it's bound to an int, which is 0x7FFFFFFF (2147483647).

PFX files are PKCS#12 Personal Information Exchange Syntax Standard bundles. They can include arbitrary number of private keys with accompanying X.509 certificates and a certificate authority chain (set certificates).

If you want to extract client certificates, you can use OpenSSL's PKCS12 tool.

openssl pkcs12 -in input.pfx -out mycerts.crt -nokeys -clcerts

The command above will output certificate(s) in PEM format. The ".crt" file extension is handled by both macOS and Window.

You mention ".cer" extension in the question which is conventionally used for the DER encoded files. A binary encoding. Try the ".crt" file first and if it's not accepted, easy to convert from PEM to DER:

openssl x509 -inform pem -in mycerts.crt -outform der -out mycerts.cer

I suspect you need to use ClientID rather than the literal ID string in your JavaScript code, since you've marked the field as runat="server".

E.g., if your JavaScript code is in an aspx file (not a separate JavaScript file):

var val = document.getElementById('<%=hdntxtbxTaksit.ClientID%>').value;

If it's in a separate JavaScript file that isn't rendered by the ASP.Net stuff, you'll have to find it another way, such as by class.

If you set the parent element as position:relative, you can set the child to the bottom setting position:absolute; and bottom:0;

#outer {_x000D_
  width:10em;_x000D_
  height:10em;_x000D_
  background-color:blue;_x000D_
  position:relative; _x000D_
}_x000D_
_x000D_
#inner {_x000D_
  position:absolute;_x000D_
  bottom:0;_x000D_
  background-color:white; _x000D_
}

<div id="outer">_x000D_
  <div id="inner">_x000D_
    <h1>done</h1>_x000D_
  </div>_x000D_
</div>_x000D_
  

both of them works <%= f.submit class: "btn btn-primary" %> and <%= f.submit "Name of Button", class: "btn btn-primary "%>

It is possible to handle this using Vavr library

import static io.vavr.API.*;
import static io.vavr.Predicates.*;

Match(variable).of(
    Case($(isIn(5, 6, ... , 100)), () -> doSomething()),
    Case($(), () -> handleCatchAllCase())
);

This is of course only slight improvement since all cases still need to be listed explicitly. But it is easy to define custom predicate:

public static <T extends Comparable<T>> Predicate<T> isInRange(T lower, T upper) {
    return x -> x.compareTo(lower) >= 0 && x.compareTo(upper) <= 0;
}

Match(variable).of(
    Case($(isInRange(5, 100)), () -> doSomething()),
    Case($(), () -> handleCatchAllCase())
);

Match is an expression so here it returns something like Runnable instance instead of invoking methods directly. After match is performed Runnable can be executed.

For further details please see official documentation.

If you are using Java, you could just replace the x00 characters before the insert like following:

myValue.replaceAll("\u0000", "")

The solution was provided and explained by Csaba in following post:

https://www.postgresql.org/message-id/1171970019.3101.328.camel%40coppola.muc.ecircle.de

Respectively:

in Java you can actually have a "0x0" character in your string, and that's valid unicode. So that's translated to the character 0x0 in UTF8, which in turn is not accepted because the server uses null terminated strings... so the only way is to make sure your strings don't contain the character '\u0000'.

AddSingleton()

AddSingleton() creates a single instance of the service when it is first requested and reuses that same instance in all the places where that service is needed.

AddScoped()

In a scoped service, with every HTTP request, we get a new instance. However, within the same HTTP request, if the service is required in multiple places, like in the view and in the controller, then the same instance is provided for the entire scope of that HTTP request. But every new HTTP request will get a new instance of the service.

AddTransient()

With a transient service, a new instance is provided every time a service instance is requested whether it is in the scope of the same HTTP request or across different HTTP requests.

Try using Database SetInitializer which belongs to using System.Data.Entity;

In Global.asax

protected void Application_Start()
{
    Database.SetInitializer(new DropCreateDatabaseIfModelChanges<yourContext>());
}

This will create new database everytime your model is changed.But your database would be empty.In order to fill it with dummy data you can use Seeding. Which you can implement as :

Seeding ::

protected void Application_Start()
{
    Database.SetInitializer(new AddressBookInitializer());
                ----rest code---
}
public class AddressBookInitializer : DropCreateDatabaseIfModelChanges<AddressBook>
{
    protected override void Seed(AddressBook context)
    {
        context.yourmodel.Add(
        {

        });
        base.Seed(context);
    }

}

You could use a macro, but it’s simpler to use styles. Define a character style that has the desired text color and assign a shortcut key to it, say Alt+R. In order to be able to switch color using just the keyboard, define another character style, say “normal”, that has no special feature—just for use to get normal text after switching to your colored style, and assign another shortcut to it, say Alt+N. Then you would just type text, press Alt+R to switch to colored text, type that text, press Alt+N to resume normal text color, etc.

I used KooiInc's function listed above but I had to use two different input types one 'button' for IE and one 'submit' for FireFox. I am not exactly sure why but it works.

// HTML

<input type="button" id="btnEmailHidden" style="display:none" />
<input type="submit" id="btnEmailHidden2" style="display:none" />

// in JavaScript

var hiddenBtn = document.getElementById("btnEmailHidden");

if (hiddenBtn.fireEvent) {
    hiddenBtn.fireEvent('onclick');
    hiddenBtn[eType]();
}
else {
    // dispatch for firefox + others
    var evObj = document.createEvent('MouseEvent');
    evObj.initEvent(eType, true, true);
    var hiddenBtn2 = document.getElementById("btnEmailHidden2");
    hiddenBtn2.dispatchEvent(evObj);
}

I have search and tried many suggestions but this is what ended up working. If I had some more time I would have liked to investigate why submit works with FF and button with IE but that would be a luxury right now so on to the next problem.

>> "1,2,3,4".split(",")
=> ["1", "2", "3", "4"]

Or for integers:

>> "1,2,3,4".split(",").map { |s| s.to_i }
=> [1, 2, 3, 4]

Or for later versions of ruby (>= 1.9 - as pointed out by Alex):

>> "1,2,3,4".split(",").map(&:to_i)
=> [1, 2, 3, 4]

On Solaris, for a particular known user name:

crontab -l username

All other *Nix will need -u modifier:

crontab -u username -l

To get all user's jobs at once on Solaris, much like other posts above:

for user in $(cut -f1 -d: /etc/passwd); do crontab -l $user 2>/dev/null; done

From XMLGregorianCalendar to java.util.Date you can simply do:

java.util.Date dt = xmlGregorianCalendarInstance.toGregorianCalendar().getTime();  

In your ~/.gitconfig file, simply add this:

[color]
  ui = auto

It takes care of all your git commands.

Let's break down your examples one by one.

@media (max-width:632px)

This one is saying for a window with a max-width of 632px that you want to apply these styles. At that size you would be talking about anything smaller than a desktop screen in most cases.

@media screen and (max-width:632px)

This one is saying for a device with a screen and a window with max-width of 632px apply the style. This is almost identical to the above except you are specifying screen as opposed to the other available media types the most common other one being print.

@media only screen and (max-width:632px)

Here is a quote straight from W3C to explain this one.

The keyword ‘only’ can also be used to hide style sheets from older user agents. User agents must process media queries starting with ‘only’ as if the ‘only’ keyword was not present.

As there is no such media type as "only", the style sheet should be ignored by older browsers.

Here's the link to that quote that is shown in example 9 on that page.

Hopefully this sheds some light on media queries.

EDIT:

Be sure to check out @hybrids excellent answer on how the only keyword is really handled.

Yes, even we can change image of UIButton, by using flag.

class ViewController: UIViewController
{
    @IBOutlet var btnImage: UIButton!
    var flag = false

    override func viewDidLoad()
    {
        super.viewDidLoad()

        //setting default image for button
        setButtonImage()

    }

    @IBAction func btnClick(_ sender: Any)
    {
        flag = !flag
        setButtonImage()
    }

    func setButtonImage(){
        let imgName = flag ? "share" : "image"
        let image1 = UIImage(named: "\(imgName).png")!
        self.btnImage.setImage(image1, for: .normal)
    }

}

Here, after every click your button image will change alternatively.

I am aware that this question is about C++11. However, for those who googled and landed on this page, templated lambdas are now supported in C++14 and go by the name Generic Lambdas.

[info] Most of the popular compilers support this feature now. Microsoft Visual Studio 2015 supports. Clang supports. GCC supports.

In C# 6+ you can use string interpolation and make this more terse:

$"{DateTime.UtcNow:s}Z"

I think NSDecimalNumber will do it:

Example:

NSNumber *theNumber = [NSDecimalNumber decimalNumberWithString:[stringVariable text]]];

NSDecimalNumber is a subclass of NSNumber, so implicit casting allowed.

You are specifying .fixedbutton in your CSS (a class) and specifying the id on the element itself.

Change your CSS to the following, which will select the id fixedbutton

#fixedbutton {
    position: fixed;
    bottom: 0px;
    right: 0px; 
}

Here's a jsFiddle courtesy of JoshC.

You can use php code in files with extension .php and only there (iff other is not defined in your server settings).

Just rename your file *.html to *.php

If you want to allow php code processing in files of different format, you have two options to do that:

1) Modifying httpd.conf to allow this for all projects on your server, by adding:

AddHandler application/x-httpd-php .htm .html

2) Creating .htaccess file in your separate project top directory with:

<Files />
    AddType application/x-httpd-php .html
</Files>

For second option you need to allow use of .htaccess files in your httpd.conf, by adding the following settings:

AllowOverride All
AccessFileName .htaccess

*that is correct for Apache HTTP Server

You can also use DataTable - you can define then the number of columns and their types and then add rows http://www.dotnetperls.com/datatable

This is a simple Python script that does just what you need:

#!/usr/bin/python

import sys

# Clipboard storage
clipboard_file = '/tmp/clipboard.tmp'

if(sys.stdin.isatty()): # Should write clipboard contents out to stdout
    with open(clipboard_file, 'r') as c:
        sys.stdout.write(c.read())
elif(sys.stdout.isatty()): # Should save stdin to clipboard
    with open(clipboard_file, 'w') as c:
        c.write(sys.stdin.read())

Save this as an executable somewhere in your path (I saved it to /usr/local/bin/clip. You can pipe in stuff to be saved to your clipboard...

echo "Hello World" | clip

And you can pipe what's in your clipboard to some other program...

clip | cowsay
 _____________
< Hello World >
 -------------
        \   ^__^
         \  (oo)\_______
            (__)\       )\/\
                ||----w |
                ||     ||

Running it by itself will simply output what's in the clipboard.

What works for me was with one dot. Mine Office is 365. =HYPERLINK(".\Name_of_folder\","DisplayLinkName") =HYPERLINK(".\Name_of_file","DisplayLinkName")

with jQuery:

 $("#playerSource").attr("src", "new_src");

    var audio = $("#player");      

    audio[0].pause();
    audio[0].load();//suspends and restores all audio element

    if (isAutoplay) 
        audio[0].play();

This approach is similar to "stash" solution but I think it might be more clear:

1. Your current local branch is "master" and you have local changes.
2. After synchronizing, there are incoming changes and some files need to be merged.
3. So, the first step is to switch to a new local branch (say "my_changes"):
   • Team -> Switch To -> New branch
     • Branch name: my_changes (for example)
4. After switching to the new branch, the uncommitted local changes still exist. So, commit all your local uncommitted changes to the new branch "my_changes":
5. Switch back to the local "master" branch:
   • Team -> Switch To -> master
6. Now, when you choose Team -> Synchronize Workspace, no "merge" files are expected to appear.
7. Select Team -> Pull
   • Now the local "master" branch is up to date with respect to the remote "master" branch.
8. Now, there are two options:
   • Option 1:
     • Select Team -> Merge to merge the original local changes from "my_changes" local branch into "master" local branch.
     • Now commit the incoming changes from the previous step into the local "master" branch and push them to the remote "master" branch.
   • Option 2:
     • Switch again to "my_changes" local branch.
     • Merge the updates from the local "master" branch into "my_changes" branch.
     • Proceed with the current task in "my_changes" branch.
     • When the task is done, use Option 1 above to update both the local "master" branch as well as the remote one.

Linux doesn't have a separate threads per process limit, just a limit on the total number of processes on the system (threads are essentially just processes with a shared address space on Linux) which you can view like this:

cat /proc/sys/kernel/threads-max

The default is the number of memory pages/4. You can increase this like:

echo 100000 > /proc/sys/kernel/threads-max

There is also a limit on the number of processes (and hence threads) that a single user may create, see ulimit/getrlimit for details regarding these limits.

just remove both build folder in /android and /android/app

and build again with react-native run-android

IF you're only targeting modern browsers, AND you can have your border on a separate element from your content, then you can use the CSS scale transform to get a larger dot or dash:

border: 1px dashed black;
border-radius: 10px;
-webkit-transform: scale(8);
transform: scale(8);

It takes a lot of positional tweaking to get it to line up, but it works. By changing the thickness of the border, the starting size and the scale factor, you can get to just about thickness-length ratio you want. Only thing you can't touch is dash-to-gap ratio.

This guide is oriented to developers who already have an application in the Play Store. If you are starting with a new app the process it's much easier and you can follow the guidelines of paragraph "New apps" from here

Prerequisites that 99% of developers already have :

1. Android Studio

2. JDK 8 and after installation you need to setup an environment variable in your user space to simplify terminal commands. In Windows x64 you need to add this : C:\Program Files\Java\{JDK_VERSION}\bin to the Path environment variable. (If you don't know how to do this you can read my guide to add a folder to the Windows 10 Path environment variable).

Step 0: Open Google Play developer console, then go to Release Management -> App Signing.

Accept the App Signing TOS.

Step 1: Download PEPK Tool clicking the button identical to the image below

Step 2: Open a terminal and type:

java -jar PATH_TO_PEPK --keystore=PATH_TO_KEYSTORE --alias=ALIAS_YOU_USE_TO_SIGN_APK --output=PATH_TO_OUTPUT_FILE --encryptionkey=GOOGLE_ENCRYPTION_KEY

Legend:

• PATH_TO_PEPK = Path to the pepk.jar you downloaded in Step 1, could be something like C:\Users\YourName\Downloads\pepk.jar for Windows users.
• PATH_TO_KEYSTORE = Path to keystore which you use to sign your release APK. Could be a file of type *.keystore or *.jks or without extension. Something like C:\Android\mykeystore or C:\Android\mykeystore.keystore etc...
• ALIAS_YOU_USE_TO_SIGN_APK = The name of the alias you use to sign the release APK.
• PATH_TO_OUTPUT_FILE = The path of the output file with .pem extension, something like C:\Android\private_key.pem
• GOOGLE_ENCRYPTION_KEY = This encryption key should be always the same. You can find it in the App Signing page, copy and paste it. Should be in this form: eb10fe8f7c7c9df715022017b00c6471f8ba8170b13049a11e6c09ffe3056a104a3bbe4ac5a955f4ba4fe93fc8cef27558a3eb9d2a529a2092761fb833b656cd48b9de6a

Example:

java -jar "C:\Users\YourName\Downloads\pepk.jar" --keystore="C:\Android\mykeystore" --alias=myalias --output="C:\Android\private_key.pem" --encryptionkey=eb10fe8f7c7c9df715022017b00c6471f8ba8170b13049a11e6c09ffe3056a104a3bbe4ac5a955f4ba4fe93fc8cef27558a3eb9d2a529a2092761fb833b656cd48b9de6a

Press Enter and you will need to provide in order:

1. The keystore password
2. The alias password

If everything has gone OK, you now will have a file in PATH_TO_OUTPUT_FILE folder called private_key.pem.

Step 3: Upload the private_key.pem file clicking the button identical to the image below

Step 4: Create a new keystore file using Android Studio.

YOU WILL NEED THIS KEYSTORE IN THE FUTURE TO SIGN THE NEXT RELEASES OF YOUR APP, DON'T FORGET THE PASSWORDS

Open one of your Android projects (choose one at random). Go to Build -> Generate Signed APK and press Create new.

Now you should fill the required fields.

Key store path represent the new keystore you will create, choose a folder and a name using the 3 dots icon on the right, i choosed C:\Android\upload_key.jks (.jks extension will be added automatically)

NOTE: I used upload as the new alias name but if you previously used the same keystore with different aliases to sign different apps, you should choose the same aliases name you had previously in the original keystore.

Press OK when finished, and now you will have a new upload_key.jks keystore. You can close Android Studio now.

Step 5: We need to extract the upload certificate from the newly created upload_key.jks keystore. Open a terminal and type:

keytool -export -rfc -keystore UPLOAD_KEYSTORE_PATH -alias UPLOAD_KEYSTORE_ALIAS -file PATH_TO_OUTPUT_FILE

Legend:

• UPLOAD_KEYSTORE_PATH = The path of the upload keystore you just created. In this case was C:\Android\upload_key.jks.
• UPLOAD_KEYSTORE_ALIAS = The new alias associated with the upload keystore. In this case was upload.
• PATH_TO_OUTPUT_FILE = The path to the output file with .pem extension. Something like C:\Android\upload_key_public_certificate.pem.

Example:

keytool -export -rfc -keystore "C:\Android\upload_key.jks" -alias upload -file "C:\Android\upload_key_public_certificate.pem"

Press Enter and you will need to provide the keystore password.

Now if everything has gone OK, you will have a file in the folder PATH_TO_OUTPUT_FILE called upload_key_public_certificate.pem.

Step 6: Upload the upload_key_public_certificate.pem file clicking the button identical to the image below

Step 7: Click ENROLL button at the end of the App Signing page.

Now every new release APK must be signed with the upload_key.jks keystore and aliases created in Step 4, prior to be uploaded in the Google Play Developer console.

More Resources:

• Google documentation on Google Play App Signing
• Form to request the reset of your upload keystore if you lose it

Q&A

Q: When i upload the APK signed with the new upload_key keystore, Google Play show an error like : You uploaded an unsigned APK. You need to create a signed APK.

A: Check to sign the APK with both signatures (V1 and V2) while building the release APK. Read here for more details.

UPDATED

The step 4,5,6 are to create upload key which is optional for existing apps

"Upload key (optional for existing apps): A new key you generate during your enrollment in the program. You will use the upload key to sign all future APKs prior to uploading them to the Play Console." https://support.google.com/googleplay/android-developer/answer/7384423

For folks who have centered layouts (via margin:0 auto;), here's a mash-up of the position:fixed solution along with @tfe's proposed solution.

Use this solution if you're experiencing page-snapping (due to the scrollbar showing/hiding).

// lock scroll position, but retain settings for later
var scrollPosition = [
    window.pageXOffset || document.documentElement.scrollLeft || document.body.scrollLeft,
    window.pageYOffset || document.documentElement.scrollTop  || document.body.scrollTop
];
var $html = $('html'); // bow to the demon known as MSIE(v7)
$html.addClass('modal-noscroll');
$html.data('scroll-position', scrollPosition);
$html.data('margin-top', $html.css('margin-top'));
$html.css('margin-top', -1 * scrollPosition[1]);

…combined with…

// un-lock scroll position
var $html = $('html').removeClass('modal-noscroll');
var scrollPosition = $html.data('scroll-position');
var marginTop = $html.data('margin-top');
$html.css('margin-top', marginTop);
window.scrollTo(scrollPosition[0], scrollPosition[1])

…and finally, the CSS for .modal-noscroll…

.modal-noscroll
{
    position: fixed;
    overflow-y: scroll;
    width: 100%;
}

I would venture to say this is more of a proper fix than any of the other solutions out there, but I haven't tested it that thoroughly yet… :P

Edit: please note that I have no clue how badly this might perform (read: blow up) on a touch device.

Ultimately was able to figure it out , i just hope it will help someone like me.
Following is how the web pack config file should look like check the dist dir and output file specified. I was missing the way to specify the path of dist directory

const webpack = require('webpack');
const path = require('path');
var config = {
    entry: './main.js',

    output: {
        path: path.join(__dirname, '/dist'),
        filename: 'index.js',
    },

    devServer: {
        inline: true,
        port: 8080
    },
    resolveLoader: {
        modules: [path.join(__dirname, 'node_modules')]
    },
    module: {
        loaders: [
            {
                test: /\.jsx?$/,
                exclude: /node_modules/,
                loader: 'babel-loader',

                query: {
                    presets: ['es2015', 'react']
                }
            }
        ]
    },
}

module.exports = config;

Then the package json file

{
  "name": "reactapp",
  "version": "1.0.0",
  "description": "",
  "main": "index.js",
  "scripts": {
    "start": "webpack --progress",
    "production": "webpack -p --progress"
  },
  "author": "",
  "license": "ISC",
  "dependencies": {
    "react": "^15.4.2",
    "react-dom": "^15.4.2",
    "webpack": "^2.2.1"
  },
  "devDependencies": {
    "babel-core": "^6.0.20",
    "babel-loader": "^6.0.1",
    "babel-preset-es2015": "^6.0.15",
    "babel-preset-react": "^6.0.15",
    "babel-preset-stage-0": "^6.0.15",
    "express": "^4.13.3",
    "webpack": "^1.9.6",
    "webpack-devserver": "0.0.6"
  }
}

Notice the script section and production section, production section is what gives you the final deployable index.js file ( name can be anything )

Rest fot the things will depend upon your code and components

Execute following sequence of commands

npm install

this should get you all the dependency (node modules)

then

npm run production

this should get you the final index.js file which will contain all the code bundled

Once done place index.html and index.js files under www/html or the web app root directory and that's all.

You cannot just put in a function to pause Javascript unfortunately.

You have to use setTimeout()

Example:

function startTimer () {
    timer.start();
    setTimeout(stopTimer,5000);
}

function stopTimer () {
    timer.stop();
}

EDIT:

For your user generated countdown, it is just as simple.

HTML:

<input type="number" id="delay" min="1" max="5">

JS:

var delayInSeconds = parseInt(delay.value);
var delayInMilliseconds = delayInSeconds*1000;

function startTimer () {
    timer.start();
    setTimeout(stopTimer,delayInMilliseconds);
}

function stopTimer () {
    timer.stop;
}

Now you simply need to add a trigger for startTimer(), such as onchange.

You might want to take a look at Standard Compression Scheme for Unicode.

SQL Server 2008 R2 use it internally and can achieve up to 50% compression.

Assuming you are talking about JavaScript in an HTML document.

You can't do this directly since, as far as the JSP is concerned, it is outputting text, and as far as the page is concerned, it is just getting an HTML document.

You have to generate JavaScript code to instantiate the variable, taking care to escape any characters with special meaning in JS. If you just dump the data (as proposed by some other answers) you will find it falling over when the data contains new lines, quote characters and so on.

The simplest way to do this is to use a JSON library (there are a bunch listed at the bottom of http://json.org/ ) and then have the JSP output:

<script type="text/javascript">
    var myObject = <%= the string output by the JSON library %>;
</script>

This will give you an object that you can access like:

myObject.someProperty

in the JS.

If the delimiter is /, you will need to escape.

You either want to add "." to your CLASSPATH to specify the current directory, or add it manually at run time the way unbeli suggested.

If you're using C++, you can use std::next_permutation from the <algorithm> header file:

int a[] = {3,4,6,2,1};
int size = sizeof(a)/sizeof(a[0]);
std::sort(a, a+size);
do {
  // print a's elements
} while(std::next_permutation(a, a+size));

See if your script is running GPU in Task manager. If not, suspect your CUDA version is right one for the tensorflow version you are using, as the other answers suggested already.

Additionally, a proper CUDA DNN library for the CUDA version is required to run GPU with tensorflow. Download/extract it from here and put the DLL (e.g., cudnn64_7.dll) into CUDA bin folder (e.g., C:\Program Files\NVIDIA GPU Computing Toolkit\CUDA\v10.1\bin).

You should use NSIntegers if you need to compare them against constant values such as NSNotFound or NSIntegerMax, as these values will differ on 32-bit and 64-bit systems, so index values, counts and the like: use NSInteger or NSUInteger.

It doesn't hurt to use NSInteger in most circumstances, excepting that it takes up twice as much memory. The memory impact is very small, but if you have a huge amount of numbers floating around at any one time, it might make a difference to use ints.

If you DO use NSInteger or NSUInteger, you will want to cast them into long integers or unsigned long integers when using format strings, as new Xcode feature returns a warning if you try and log out an NSInteger as if it had a known length. You should similarly be careful when sending them to variables or arguments that are typed as ints, since you may lose some precision in the process.

On the whole, if you're not expecting to have hundreds of thousands of them in memory at once, it's easier to use NSInteger than constantly worry about the difference between the two.

You can use np.logaddexp (which implements the idea in @gg349's answer):

In [33]: d = np.array([[1089, 1093]])

In [34]: e = np.array([[1000, 4443]])

In [35]: log_res = np.logaddexp(-3*d[0,0], -3*d[0,1]) - np.logaddexp(-3*e[0,0], -3*e[0,1])

In [36]: log_res
Out[36]: -266.99999385580668

In [37]: res = exp(log_res)

In [38]: res
Out[38]: 1.1050349147204485e-116

Or you can use scipy.special.logsumexp:

In [52]: from scipy.special import logsumexp

In [53]: res = np.exp(logsumexp(-3*d) - logsumexp(-3*e))

In [54]: res
Out[54]: 1.1050349147204485e-116

The exception states that your result is closed. You should examine your code and look for all location where you issue a ResultSet.close() call. Also look for Statement.close() and Connection.close(). For sure, one of them gets called before rs.next() is called.

Promise.allSettled

Instead of Promise.all use Promise.allSettled which waits for all promises to settle, regardless of the result

let p1 = new Promise(resolve => resolve("result1"));
let p2 = new Promise( (resolve,reject) => reject('some troubles') );
let p3 = new Promise(resolve => resolve("result3"));

// It returns info about each promise status and value
Promise.allSettled([p1,p2,p3]).then(result=> console.log(result));

Polyfill

if (!Promise.allSettled) {
  const rejectHandler = reason => ({ status: 'rejected', reason });
  const resolveHandler = value => ({ status: 'fulfilled', value });

  Promise.allSettled = function (promises) {
    const convertedPromises = promises
      .map(p => Promise.resolve(p).then(resolveHandler, rejectHandler));
    return Promise.all(convertedPromises);
  };
}

Short and precise answer which answers all your questions formally from JLS:

3.10.7. The Null Literal

The null type has one value, the null reference, represented by the null literal null, which is formed from ASCII characters.

A null literal is always of the null type.

Only a reference of type which is assigned to null is allocated. You don't assign any value (object) to the reference. Such allocation is specific to JVM how much reference will take and in which memory area it will be allocated.

You need to use cell-arrays:

names = cell(10,1);
for i=1:10
    names{i} = ['Sample Text ' num2str(i)];
end

Page encoding or anything else do not matter a lot. ISO-8859-1 is a subset of UTF-8, therefore you never have to convert ISO-8859-1 to UTF-8 because ISO-8859-1 is already UTF-8,a subset of UTF-8 but still UTF-8. Plus, all that do not mean a thing if You have a double encoding somewhere. This is my "cure all" recipe for all things encoding and charset related:

        String myString = "heartbroken ð";

//String is double encoded, fix that first.

                myString = new String(myString.getBytes(StandardCharsets.ISO_8859_1), StandardCharsets.UTF_8);
                String cleanedText = StringEscapeUtils.unescapeJava(myString);
                byte[] bytes = cleanedText.getBytes(StandardCharsets.UTF_8);
                String text = new String(bytes, StandardCharsets.UTF_8);
                Charset charset = Charset.forName("UTF-8");
                CharsetDecoder decoder = charset.newDecoder();
                decoder.onMalformedInput(CodingErrorAction.IGNORE);
                decoder.onUnmappableCharacter(CodingErrorAction.IGNORE);
                CharsetEncoder encoder = charset.newEncoder();
                encoder.onMalformedInput(CodingErrorAction.IGNORE);
                encoder.onUnmappableCharacter(CodingErrorAction.IGNORE);
                try {
                    // The new ByteBuffer is ready to be read.
                    ByteBuffer bbuf = encoder.encode(CharBuffer.wrap(text));
                    // The new ByteBuffer is ready to be read.
                    CharBuffer cbuf = decoder.decode(bbuf);
                    String str = cbuf.toString();
                } catch (CharacterCodingException e) {
                    logger.error("Error Message if you want to");

                } 

Angular2 v2.1.0 (stable):

The ActivatedRoute provides an observable one can subscribe.

  constructor(
     private route: ActivatedRoute
  ) { }

  this.route.params.subscribe(params => {
     let value = params[key];
  });

This triggers everytime the route gets updated, as well: /home/files/123 -> /home/files/321

If you opt for JPEG, and you're dealing with images for a website, you may want to consider the Google Guetzli perceptual encoder, which is freely available. In my experience, for a fixed quality Guetzli produces smaller files than standard JPEG encoding libraries, while maintaining full compatibility with the JPEG standard (so your images will have the same compatibility as common JPEG images).

The only drawback is that Guetzli takes lot of time to encode.. but this is done only once, when you prepare the image for the website, while the benefits remains forever! Smaller images will take less time to download, so your website speed will increase in the everyday use.

In case of SQL Server, this should work

SELECT CONVERT(VARCHAR(8),GETDATE(),108) AS HourMinuteSecond

It took me more than 4 hours to fix this problem. I followed the guide from http://docs.phonegap.com/en/2.1.0/guide_getting-started_android_index.md.html#Getting%20Started%20with%20Android

I'm using Android Studio (Eclipse with ADT could not work properly because of the build problem).

Solution that worked for me:

1. I put the /assets/www/index.html under app/src/main/assets directory. (take care AndroidStudio has different perspectives like Project or Android)

2. use super.loadUrl("file:///android_asset/www/index.html"); instead of super.loadUrl("file:///android_assets/www/index.html"); (no s)

You can increase security in authentication process by using JWT (JSON Web Tokens) and SSL/HTTPS.

The Basic Auth / Session ID can be stolen via:

• MITM attack (Man-In-The-Middle) - without SSL/HTTPS
• An intruder gaining access to a user's computer
• XSS

By using JWT you're encrypting the user's authentication details and storing in the client, and sending it along with every request to the API, where the server/API validates the token. It can't be decrypted/read without the private key (which the server/API stores secretly) Read update.

The new (more secure) flow would be:

Login

• User logs in and sends login credentials to API (over SSL/HTTPS)
• API receives login credentials
• If valid:
  • Register a new session in the database Read update
  • Encrypt User ID, Session ID, IP address, timestamp, etc. in a JWT with a private key.
• API sends the JWT token back to the client (over SSL/HTTPS)
• Client receives the JWT token and stores in localStorage/cookie

Every request to API

• User sends a HTTP request to API (over SSL/HTTPS) with the stored JWT token in the HTTP header
• API reads HTTP header and decrypts JWT token with its private key
• API validates the JWT token, matches the IP address from the HTTP request with the one in the JWT token and checks if session has expired
• If valid:
  • Return response with requested content
• If invalid:
  • Throw exception (403 / 401)
  • Flag intrusion in the system
  • Send a warning email to the user.

Updated 30.07.15:

JWT payload/claims can actually be read without the private key (secret) and it's not secure to store it in localStorage. I'm sorry about these false statements. However they seem to be working on a JWE standard (JSON Web Encryption).

I implemented this by storing claims (userID, exp) in a JWT, signed it with a private key (secret) the API/backend only knows about and stored it as a secure HttpOnly cookie on the client. That way it cannot be read via XSS and cannot be manipulated, otherwise the JWT fails signature verification. Also by using a secure HttpOnly cookie, you're making sure that the cookie is sent only via HTTP requests (not accessible to script) and only sent via secure connection (HTTPS).

Updated 17.07.16:

JWTs are by nature stateless. That means they invalidate/expire themselves. By adding the SessionID in the token's claims you're making it stateful, because its validity doesn't now only depend on signature verification and expiry date, it also depends on the session state on the server. However the upside is you can invalidate tokens/sessions easily, which you couldn't before with stateless JWTs.

The best way in browsers that support it, is to send the file as a Blob, or using FormData if you want a multipart form. You do not need a FileReader for that. This is both simpler and more efficient than trying to read the data.

If you specifically want to send it as multipart/form-data, you can use a FormData object:

var xmlHttpRequest = new XMLHttpRequest();
xmlHttpRequest.open("POST", '/pushfile', true);
var formData = new FormData();
// This should automatically set the file name and type.
formData.append("file", file);
// Sending FormData automatically sets the Content-Type header to multipart/form-data
xmlHttpRequest.send(formData);

You can also send the data directly, instead of using multipart/form-data. See the documentation. Of course, this will need a server-side change as well.

// file is an instance of File, e.g. from a file input.
var xmlHttpRequest = new XMLHttpRequest();
xmlHttpRequest.open("POST", '/pushfile', true);

xmlHttpRequest.setRequestHeader("Content-Type", file.type);

// Send the binary data.
// Since a File is a Blob, we can send it directly.
xmlHttpRequest.send(file);

For browser support, see: http://caniuse.com/#feat=xhr2 (most browsers, including IE 10+).

With Anaconda 4.5+ and Python 3.6+ on Windows use

Ctrl+Z

or

exit()

In some cases, you might have to use

Ctrl+Break

If your computer doesn't have Break key then see here.

1. open service control manager database using openscmanager
2. get dependent service using EnumDependService()
3. Stop all dependent services using ChangeConfig() sending STOP signal to this function if they are started
4. stop actual service
5. Get all Services dependencies of a service
6. Start all services dependencies using StartService() if they are stopped
7. Start actual service

Thus your service is restarted taking care all dependencies.

(Neither IN nor ANY is an "operator". A "construct" or "syntax element".)

Logically, quoting the manual:

IN is equivalent to = ANY.

But there are two syntax variants of IN and two variants of ANY. Details:

• How to use ANY instead of IN in a WHERE clause with Rails?

IN taking a set is equivalent to = ANY taking a set, as demonstrated here:

• postgreSQL - in vs any

But the second variant of each is not equivalent to the other. The second variant of the ANY construct takes an array (must be an actual array type), while the second variant of IN takes a comma-separated list of values. This leads to different restrictions in passing values and can also lead to different query plans in special cases:

• Index not used with =any() but used with in
• Pass multiple sets or arrays of values to a function

ANY is more versatile

The ANY construct is far more versatile, as it can be combined with various operators, not just =. Example:

SELECT 'foo' LIKE ANY('{FOO,bar,%oo%}');

For a big number of values, providing a set scales better for each:

• Optimizing a Postgres query with a large IN

Related:

• Can PostgreSQL index array columns?

Inversion / opposite / exclusion

"Find rows where id is in the given array":

SELECT * FROM tbl WHERE id = ANY (ARRAY[1, 2]);

Inversion: "Find rows where id is not in the array":

SELECT * FROM tbl WHERE id <> ALL (ARRAY[1, 2]);
SELECT * FROM tbl WHERE id <> ALL ('{1, 2}');  -- equivalent array literal
SELECT * FROM tbl WHERE NOT (id = ANY ('{1, 2}'));

All three equivalent. The first with array constructor, the other two with array literal. The data type can be derived from context unambiguously. Else, an explicit cast may be required, like '{1,2}'::int[].

Rows with id IS NULL do not pass either of these expressions. To include NULL values additionally:

SELECT * FROM tbl WHERE (id = ANY ('{1, 2}')) IS NOT TRUE;

An alternative for the bind() method.

Use the click() method, do something like this:

commentbtn.click({id: 10, name: "João"}, onClickCommentBtn);

function onClickCommentBtn(event)
{
  alert("Id=" + event.data.id + ", Name = " + event.data.name);
}

Or, if you prefer:

commentbtn.click({id: 10, name: "João"},  function (event) {
  alert("Id=" + event.data.id + ", Nome = " + event.data.name);
});

It will show an alert box with the following infos:

Id = 10, Name = João

This is the variable for the current value in the pipe line, which is called $PSItem in Powershell 3 and newer.

1,2,3 | %{ write-host $_ } 

or

1,2,3 | %{ write-host $PSItem } 

For example in the above code the %{} block is called for every value in the array. The $_ or $PSItem variable will contain the current value.

Text Wrap:

The MultiCell is used for print text with multiple lines. It has the same atributes of Cell except for ln and link.

$pdf->MultiCell( 200, 40, $reportSubtitle, 1);

Line Height:

What multiCell does is to spread the given text into multiple cells, this means that the second parameter defines the height of each line (individual cell) and not the height of all cells (collectively).

MultiCell(float w, float h, string txt [, mixed border [, string align [, boolean fill]]])

You can read the full documentation here.

According to this example Random.nextInt(n) has less predictable output then Math.random() * n. According to [sorted array faster than an unsorted array][1] I think we can say Random.nextInt(n) is hard to predict.

usingRandomClass : time:328 milesecond.

usingMathsRandom : time:187 milesecond.

package javaFuction;
import java.util.Random;
public class RandomFuction 
{
    static int array[] = new int[9999];
    static long sum = 0;
    public static void usingMathsRandom() {
        for (int i = 0; i < 9999; i++) {
         array[i] = (int) (Math.random() * 256);
       }

        for (int i = 0; i < 9999; i++) {
            for (int j = 0; j < 9999; j++) {
                if (array[j] >= 128) {
                    sum += array[j];
                }
            }
        }
    }

    public static void usingRandomClass() {
        Random random = new Random();
        for (int i = 0; i < 9999; i++) {
            array[i] = random.nextInt(256);
        }

        for (int i = 0; i < 9999; i++) {
            for (int j = 0; j < 9999; j++) {
                if (array[j] >= 128) {
                    sum += array[j];
                }
            }

        }

    }

    public static void main(String[] args) {
        long start = System.currentTimeMillis();
        usingRandomClass();
        long end = System.currentTimeMillis();
        System.out.println("usingRandomClass " + (end - start));
        start = System.currentTimeMillis();
        usingMathsRandom();
        end = System.currentTimeMillis();
        System.out.println("usingMathsRandom " + (end - start));

    }

}

Duplication declaration of same activity in Android Manifest file.

Responsive meta tag

To ensure proper rendering and touch zooming for all devices, add the responsive viewport meta tag to your <head>.

<meta name="viewport" content="width=device-width, initial-scale=1, shrink-to-fit=no">

When using the saveas function the resolution isn't as good as when manually saving the figure with File-->Save As..., It's more recommended to use hgexport instead, as follows:

hgexport(gcf, 'figure1.jpg', hgexport('factorystyle'), 'Format', 'jpeg');

This will do exactly as manually saving the figure.

source: http://www.mathworks.com/support/solutions/en/data/1-1PT49C/index.html?product=SL&solution=1-1PT49C

soooo late in the game i know, but thought i'd share this anyway. If you are solely working with the paths as strings, figuring this out is easy as pie:

private bool IsFolder(string ThePath)
{
    string BS = Path.DirectorySeparatorChar.ToString();
    return Path.GetDirectoryName(ThePath) == ThePath.TrimEnd(BS.ToCharArray());
}

for example: ThePath == "C:\SomeFolder\File1.txt" would end up being this:

return "C:\SomeFolder" == "C:\SomeFolder\File1.txt" (FALSE)

Another example: ThePath == "C:\SomeFolder\" would end up being this:

return "C:\SomeFolder" == "C:\SomeFolder" (TRUE)

And this would also work without the trailing backslash: ThePath == "C:\SomeFolder" would end up being this:

return "C:\SomeFolder" == "C:\SomeFolder" (TRUE)

Keep in mind here that this only works with the paths themselves, and not the relationship between the path and the "physical disk"... so it can't tell you if the path/file exists or anything like that, but it sure can tell you if the path is a folder or a file...

As an alternative to Activator.CreateInstance, FastObjectFactory in the linked url preforms better than Activator (as of .NET 4.0 and significantly better than .NET 3.5. No tests/stats done with .NET 4.5). See StackOverflow post for stats, info and code:

How to pass ctor args in Activator.CreateInstance or use IL?

I had the same problem.

Here is a workaround

android:inputType="textNoSuggestions|textVisiblePassword"
android:maxLength="6"

Thx to How can I turnoff suggestions in EditText?

To make it more interesting and to hopefully enable less hair pulling for someone else. Using python, built dictionary for a device which we can use curl to configure.

Problem: {"timezone":"+5"} //throws an error " 5"

Solution: {"timezone":"%2B"+"5"} //Works

So, in a nutshell:

var = {"timezone":"%2B"+"5"}
json = JSONEncoder().encode(var)
subprocess.call(["curl",ipaddress,"-XPUT","-d","data="+json])

Thanks to this post!

I had a similar proxy related problem. In my case it was enough to add:

webRequest.Proxy.Credentials = new NetworkCredential("user", "password", "domain");

1. Change the INNER JOIN before the WHERE clause.
2. You have two WHEREs which is not allowed.

Try this:

SELECT table1.f_id FROM table1
  INNER JOIN table2 
     ON (table2.f_id = table1.f_id AND table2.f_type = 'InProcess') 
   WHERE table1.f_com_id = '430' AND table1.f_status = 'Submitted'

This worked for my purpose done within the Spyder Console

conda install -c anaconda pyserial

this format generally works however pymorph returned thus:

conda install -c anaconda pymorph Collecting package metadata (current_repodata.json): ...working... done Solving environment: ...working... failed with initial frozen solve. Retrying with flexible solve. Collecting package metadata (repodata.json): ...working... done Solving environment: ...working... failed with initial frozen solve. Retrying with flexible solve.

Note: you may need to restart the kernel to use updated packages.

PackagesNotFoundError: The following packages are not available from current channels:

• pymorph

Current channels:

• https://conda.anaconda.org/anaconda/win-64
• https://conda.anaconda.org/anaconda/noarch
• https://repo.anaconda.com/pkgs/main/win-64
• https://repo.anaconda.com/pkgs/main/noarch
• https://repo.anaconda.com/pkgs/r/win-64
• https://repo.anaconda.com/pkgs/r/noarch
• https://repo.anaconda.com/pkgs/msys2/win-64
• https://repo.anaconda.com/pkgs/msys2/noarch

To search for alternate channels that may provide the conda package you're looking for, navigate to

https://anaconda.org

and use the search bar at the top of the page.

$string = ' Test me more ';
preg_match('/\b\w+\b/i', $string, $result); // Test
echo $result;

/* You could use [a-zA-Z]+ instead of \w+ if wanted only alphabetical chars. */
$string = ' Test me more ';
preg_match('/\b[a-zA-Z]+\b/i', $string, $result); // Test
echo $result;

Regards, Ciul

My preference is to encode all non-alphaumeric characters as HTML numeric character entities. Since almost, if not all attacks require non-alphuneric characters (like <, ", etc) this should eliminate a large chunk of dangerous output.

Format is &#N;, where N is the numeric value of the character (you can just cast the character to an int and concatenate with a string to get a decimal value). For example:

// java-ish pseudocode
StringBuffer safestrbuf = new StringBuffer(string.length()*4);
foreach(char c : string.split() ){  
  if( Character.isAlphaNumeric(c) ) safestrbuf.append(c);
  else safestrbuf.append(""+(int)symbol);

You will also need to be sure that you are encoding immediately before outputting to the browser, to avoid double-encoding, or encoding for HTML but sending to a different location.

1. Make sure your app is mentioned in installed_apps in settings.py
2. Make sure you model class extends models.Model

The accepted answer is great if you have an object you want to turn into JSON. The question also mentions pretty-printing just any JSON string, and that's what I was trying to do. I just wanted to pretty-log some JSON from a POST request (specifically a CSP violation report).

To use MarshalIndent, you would have to Unmarshal that into an object. If you need that, go for it, but I didn't. If you just need to pretty-print a byte array, plain Indent is your friend.

Here's what I ended up with:

import (
    "bytes"
    "encoding/json"
    "log"
    "net/http"
)

func HandleCSPViolationRequest(w http.ResponseWriter, req *http.Request) {
    body := App.MustReadBody(req, w)
    if body == nil {
        return
    }

    var prettyJSON bytes.Buffer
    error := json.Indent(&prettyJSON, body, "", "\t")
    if error != nil {
        log.Println("JSON parse error: ", error)
        App.BadRequest(w)
        return
    }

    log.Println("CSP Violation:", string(prettyJSON.Bytes()))
}

Use:

setTimeout(startTimer,startInterval); 

You're calling startTimer() and feed it's result (which is undefined) as an argument to setTimeout().

You can also get this error message on its own, without any stack trace or any further error message.

In this case you need to make sure your Android manifest is configured correctly (including any manifest merging happening from a library and any activity that would come from a library), and pay particular attention to the first activity displayed in your application in your manifest files.

check this

alert(window.location.hostname);

this will return host name as www.domain.com

#footer:after
{
   content: "";
    width: 40px;
    height: 3px;
    background-color: #529600;
    left: 0;
    position: relative;
    display: block;
    top: 10px;
}

Ok, so here was my process:

keytool -list -v -keystore permanent.jks - got me the alias.

keytool -export -alias alias_name -file certificate_name -keystore permanent.jks - got me the certificate to import.

Then I could import it with the keytool:

keytool -import -alias alias_name -file certificate_name -keystore keystore location

As @Christian Bongiorno says the alias can't already exist in your keystore.

Recently I had to do something similar and I resolved it with the code below. Hope it helps!

Sub ColorCode()
Dim i As Integer
Dim j As Integer
i = 2
j = 1

Do While ActiveSheet.Cells(i, 1) <> ""


If Cells(i, 5).Value = "RED" Then
ActiveSheet.ChartObjects("YourChartName").Chart.FullSeriesCollection(1).Points(j).MarkerForegroundColor = RGB(255, 0, 0)



Else

If Cells(i, 5).Value = "GREEN" Then
ActiveSheet.ChartObjects("YourChartName").Chart.FullSeriesCollection(1).Points(j).MarkerForegroundColor = RGB(0, 255, 0)

Else

If Cells(i, 5).Value = "GREY" Then
ActiveSheet.ChartObjects("YourChartName").Chart.FullSeriesCollection(1).Points(j).MarkerForegroundColor = RGB(192, 192, 192)

Else

If Cells(i, 5).Value = "YELLOW" Then
ActiveSheet.ChartObjects("YourChartName").Chart.FullSeriesCollection(1).Points(j).MarkerForegroundColor = RGB(255, 255, 0)

End If
End If
End If
End If

i = i + 1
j = j + 1

Loop



End Sub

Here is a trick for getting automatic keyboard dismissal behavior with no code at all. In the nib, edit the First Responder proxy object in the Identity inspector, adding a new first responder action; let's call it dummy:. Now hook the Did End on Exit event of the text field to the dummy: action of the First Responder proxy object. That's it! Since the text field's Did End on Exit event now has an action–target pair, the text field automatically dismisses its keyboard when the user taps Return; and since there is no penalty for not finding a handler for a message sent up the responder chain, the app doesn't crash even though there is no implementation of dummy: anywhere.

Take a look into NSColorWell class reference.

If you plan on performing more than simple one liners, it would be better to implement your own class and override the appropriate operators as they apply to your case.

Taken from Mathematics in Python:

class Vector:

  def __init__(self, data):
    self.data = data

  def __repr__(self):
    return repr(self.data)  

  def __add__(self, other):
    data = []
    for j in range(len(self.data)):
      data.append(self.data[j] + other.data[j])
    return Vector(data)  

x = Vector([1, 2, 3])    
print x + x

You can use this for header: Important: Put the following on your PHP pages that you want to include the content.

<?php
//at top:
require('header.php'); 
 ?>
 <?php
// at bottom:
require('footer.php');
?>

You can also include a navbar globaly just use this instead:

 <?php
 // At top:
require('header.php'); 
 ?>
  <?php
// At bottom:
require('footer.php');
 ?>
 <?php
 //Wherever navbar goes:
require('navbar.php'); 
?>

In header.php:

 <!DOCTYPE html>
 <html lang="en">
 <head>
    <meta charset="utf-8">
 <meta name="viewport" content="width=device-width, initial-scale=1, shrink-to-fit=no">
 </head>
 <body> 

Do Not close Body or Html tags!
Include html here:

 <?php
 //Or more global php here:

 ?>

Footer.php:

Code here:

<?php
//code

?>

Navbar.php:

<p> Include html code here</p>
<?php
 //Include Navbar PHP code here
 
?>

Benifits:

• Cleaner main php file (index.php) script.
• Change the header or footer. etc to change it on all pages with the include— Good for alerts on all pages etc...
• Time Saving!
• Faster page loads!
• you can have as many files to include as needed!
• server sided!

You could just use

DataGridView1.CurrentRow.Cells["ColumnName"].Value

You can use reversed() function. For example

x = "abcd"
for i in reversed(x):
        print(i, end="")
print("\n")
L = [1,2,3]
for i in reversed(L):
        print(i, end="")

prints dcba and 321

A much easier solution: Using a dynamic type

As of Json.NET 4.0 Release 1, there is native dynamic support. You don't need to declare a class, just use dynamic :

dynamic jsonDe = JsonConvert.DeserializeObject(json);

All the fields will be available:

foreach (string typeStr in jsonDe.Type[0])
{
    // Do something with typeStr
} 

string t = jsonDe.t;
bool a = jsonDe.a;
object[] data = jsonDe.data;
string[][] type = jsonDe.Type;

With dynamic you don't need to create a specific class to hold your data.

 [Route("api/controller/{one}/{two}")]
    public string Get(int One, int Two)
    {
        return "both params of the root link({one},{two}) and Get function parameters (one, two)  should be same ";
    }

Both params of the root link({one},{two}) and Get function parameters (one, two) should be same

If you need the result to be timezone-aware, you can use the replace() method of datetime objects. This preserves timezone, so you can do

>>> from django.utils import timezone
>>> now = timezone.now()
>>> now
datetime.datetime(2018, 8, 30, 14, 15, 43, 726252, tzinfo=<UTC>)
>>> now.replace(hour=0, minute=0, second=0, microsecond=0)
datetime.datetime(2018, 8, 30, 0, 0, tzinfo=<UTC>)

Note that this returns a new datetime object -- now remains unchanged.

Since C++17 you can use range-based for loops together with structured bindings for iterating over your map. This improves readability, as you reduce the amount of needed first and second members in your code:

std::map<std::string, std::pair<std::string, std::string>> myMap;
myMap["x"] = { "a", "b" };
myMap["y"] = { "c", "d" };

for (const auto &[k, v] : myMap)
    std::cout << "m[" << k << "] = (" << v.first << ", " << v.second << ") " << std::endl;

Output:

m[x] = (a, b)
m[y] = (c, d)

Code on Coliru

Guys am facing similar issue here is my full code

Do let me know where am i going wrong. Error message: syntax error (Missing operator) in query expression 'AutoID='

This only hapens when i click on login without entering any txt in either combobox and password field.

    Option Compare Database
Option Explicit

Private Sub Login_Click()

If IsNull(Me.ComboUserSelect.Value) Then
    MsgBox "Please select username", vbInformation, "Login ID Required"
    Me.ComboUserSelect.SetFocus
ElseIf IsNull(Me.txtpassword.Value) Then
    MsgBox "please enter password", vbInformation, "Password is Required"
    Me.txtpassword.SetFocus
End If

'============= Declaring the variables ==========='
Dim passwordindatabase As String
Dim typedpassword As String
Dim useraccesstype As String


passwordindatabase = DLookup("Password", "LoginDB", "AutoID=" & ComboUserSelect.Value)
typedpassword = txtpassword.Value
useraccesstype = DLookup("AccessType", "LoginDB", "AutoID=" & ComboUserSelect.Value)


If typedpassword = passwordindatabase Then
    If useraccesstype = "Admin" Then
    DoCmd.OpenForm ("Cam Infra")
    DoCmd.Close acForm, "Login_Form", acSaveNo
    Else
    If useraccesstype = "user" Then
    DoCmd.OpenForm ("Custom_Search_Form")
    DoCmd.Close acForm, "Login_Form", acSaveNo
    End If
    End If
    End If
    

End Sub

Yes. By default, ASP.NET MVC checks first in \Views\[Controller_Dir]\, but after that, if it doesn't find the view, it checks in \Views\Shared.

The shared directory is there specifically to share Views across multiple controllers. Just add your View to the Shared subdirectory and you're good to go.

If you do return View("~/Views/Wherever/SomeDir/MyView.aspx") You can return any View you'd like.

For Java 7 you can simply omit the Class.forName() statement as it is not really required.

For Java 8 you cannot use the JDBC-ODBC Bridge because it has been removed. You will need to use something like UCanAccess instead. For more information, see

Manipulating an Access database from Java without ODBC

I don't know Mathematica . . . too bad. But I like the answer above, for the most part.

Still there is a major flaw in relying on the stripes alone to glean the answer (I personally don't have a problem with one manual adjustment). There is an example (listed by Brett Champion, here) presented which shows that they, at times, break up the shirt pattern. So then it becomes a more complex pattern.

I would try an approach of shape id and colors, along with spacial relations. Much like face recognition, you could look for geometric patterns at certain ratios from each other. The caveat is that usually one or more of those shapes is occluded.

Get a white balance on the image, and red a red balance from the image. I believe Waldo is always the same value/hue, but the image may be from a scan, or a bad copy. Then always refer to an array of the colors that Waldo actually is: red, white, dark brown, blue, peach, {shoe color}.

There is a shirt pattern, and also the pants, glasses, hair, face, shoes and hat that define Waldo. Also, relative to other people in the image, Waldo is on the skinny side.

So, find random people to obtain an the height of people in this pic. Measure the average height of a bunch of things at random points in the image (a simple outline will produce quite a few individual people). If each thing is not within some standard deviation from each other, they are ignored for now. Compare the average of heights to the image's height. If the ratio is too great (e.g., 1:2, 1:4, or similarly close), then try again. Run it 10(?) of times to make sure that the samples are all pretty close together, excluding any average that is outside some standard deviation. Possible in Mathematica?

This is your Waldo size. Walso is skinny, so you are looking for something 5:1 or 6:1 (or whatever) ht:wd. However, this is not sufficient. If Waldo is partially hidden, the height could change. So, you are looking for a block of red-white that ~2:1. But there has to be more indicators.

1. Waldo has glasses. Search for two circles 0.5:1 above the red-white.
2. Blue pants. Any amount of blue at the same width within any distance between the end of the red-white and the distance to his feet. Note that he wears his shirt short, so the feet are not too close.
3. The hat. Red-white any distance up to twice the top of his head. Note that it must have dark hair below, and probably glasses.
4. Long sleeves. red-white at some angle from the main red-white.
5. Dark hair.
6. Shoe color. I don't know the color.

Any of those could apply. These are also negative checks against similar people in the pic -- e.g., #2 negates wearing a red-white apron (too close to shoes), #5 eliminates light colored hair. Also, shape is only one indicator for each of these tests . . . color alone within the specified distance can give good results.

This will narrow down the areas to process.

Storing these results will produce a set of areas that should have Waldo in it. Exclude all other areas (e.g., for each area, select a circle twice as big as the average person size), and then run the process that @Heike laid out with removing all but red, and so on.

Any thoughts on how to code this?

Edit:

Thoughts on how to code this . . . exclude all areas but Waldo red, skeletonize the red areas, and prune them down to a single point. Do the same for Waldo hair brown, Waldo pants blue, Waldo shoe color. For Waldo skin color, exclude, then find the outline.

Next, exclude non-red, dilate (a lot) all the red areas, then skeletonize and prune. This part will give a list of possible Waldo center points. This will be the marker to compare all other Waldo color sections to.

From here, using the skeletonized red areas (not the dilated ones), count the lines in each area. If there is the correct number (four, right?), this is certainly a possible area. If not, I guess just exclude it (as being a Waldo center . . . it may still be his hat).

Then check if there is a face shape above, a hair point above, pants point below, shoe points below, and so on.

No code yet -- still reading the docs.

@media screen and (max-width : 760px) (for tablets and phones) and use with this: <meta name="viewport" content="width=device-width, initial-scale=1, maximum-scale=1">

Try this:

$('select option:selected').text();

in my case, i was sure that the action is correct, but i was passing wrong URL, i passed the website link without the http:// in it's beginning, so it caused the same issue, here is my manifest (part of it)

<activity
        android:name=".MyBrowser"
        android:label="MyBrowser Activity" >
        <intent-filter>
            <action android:name="android.intent.action.VIEW" />
            <action android:name="com.dsociety.activities.MyBrowser" />

            <category android:name="android.intent.category.DEFAULT" />

            <data android:scheme="http" />
        </intent-filter>
    </activity>

when i code the following, the same Exception is thrown at run time :

Intent intent = new Intent();
intent.setAction("com.dsociety.activities.MyBrowser");
intent.setData(Uri.parse("www.google.com"));    // should be http://www.google.com
startActivity(intent);

<input type="button" /> buttons will not submit a form - they don't do anything by default. They're generally used in conjunction with JavaScript as part of an AJAX application.

<input type="submit"> buttons will submit the form they are in when the user clicks on them, unless you specify otherwise with JavaScript.

Use the credential that you use to login to PC. Username can be searched by Clicking in sequence

Advanced -> Find -> Choose your Username -> (e.g. JOHNSMITH_HP/John)

Password must be same as your windows login password

There you go !!

Extend HttpServletRequestWrapper, override the header getters to return the parameters as well:

public class AddParamsToHeader extends HttpServletRequestWrapper {
    public AddParamsToHeader(HttpServletRequest request) {
        super(request);
    }

    public String getHeader(String name) {
        String header = super.getHeader(name);
        return (header != null) ? header : super.getParameter(name); // Note: you can't use getParameterValues() here.
    }

    public Enumeration getHeaderNames() {
        List<String> names = Collections.list(super.getHeaderNames());
        names.addAll(Collections.list(super.getParameterNames()));
        return Collections.enumeration(names);
    }
}

..and wrap the original request with it:

chain.doFilter(new AddParamsToHeader((HttpServletRequest) request), response);

That said, I personally find this a bad idea. Rather give it direct access to the parameters or pass the parameters to it.

If you need to work a lot with database in your code and you know the structure of your table, I suggest you do it as follow:

First of all you can define a class which will help you to make objects capable of keeping your table rows data. For example in my project I created a class named Document.java to keep data of a single document from my database and I made an array list of these objects to keep data of my table which is gain by a query.

package financialdocuments;

import java.lang.*;
import java.util.HashMap;

/**
 *
 * @author Administrator
 */
public class Document {

 private int document_number; 
 private boolean document_type;
 private boolean document_status; 
 private StringBuilder document_date;
 private StringBuilder document_statement;
 private int document_code_number;
 private int document_employee_number;
 private int document_client_number;
 private String document_employee_name;
 private String document_client_name;
 private long document_amount;
 private long document_payment_amount;

 HashMap<Integer,Activity> document_activity_hashmap;


public Document(int dn,boolean dt,boolean ds,String dd,String dst,int dcon,int den,int dcln,long da,String dena,String dcna){

    document_date = new StringBuilder(dd);
    document_date.setLength(10);
    document_date.setCharAt(4, '.');
    document_date.setCharAt(7, '.');
    document_statement = new StringBuilder(dst);
    document_statement.setLength(50);
    document_number = dn; 
    document_type = dt;
    document_status = ds;
    document_code_number = dcon;
    document_employee_number = den;
    document_client_number = dcln;
    document_amount = da;
    document_employee_name = dena;
    document_client_name = dcna;

    document_payment_amount = 0;

    document_activity_hashmap = new HashMap<>();

}

public Document(int dn,boolean dt,boolean ds, long dpa){

    document_number = dn; 
    document_type = dt;
    document_status = ds;

    document_payment_amount = dpa;

    document_activity_hashmap = new HashMap<>();

}

// Print document information 
public void printDocumentInformation (){
    System.out.println("Document Number:" + document_number); 
    System.out.println("Document Date:" + document_date); 
    System.out.println("Document Type:" + document_type); 
    System.out.println("Document Status:" + document_status); 
    System.out.println("Document Statement:" + document_statement); 
    System.out.println("Document Code Number:" + document_code_number); 
    System.out.println("Document Client Number:" + document_client_number); 
    System.out.println("Document Employee Number:" + document_employee_number); 
    System.out.println("Document Amount:" + document_amount); 
    System.out.println("Document Payment Amount:" + document_payment_amount); 
    System.out.println("Document Employee Name:" + document_employee_name); 
    System.out.println("Document Client Name:" + document_client_name); 

} 
} 

Second of all, you can define a class to handle your database needs. For example I defined a class named DataBase.java which handles my connections to the database and my needed queries. And I instantiated an objected of it in my main class.

package financialdocuments;

import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.ResultSet;
import java.sql.SQLException;
import java.sql.Statement;
import java.util.ArrayList;
import java.util.HashMap;
import java.util.logging.Level;
import java.util.logging.Logger;

/**
 *
 * @author Administrator
 */
public class DataBase {

/** 
 * 
 * Defining parameters and strings that are going to be used
 * 
 */
//Connection connect;

// Tables which their datas are extracted at the beginning 
HashMap<Integer,String> code_table;
HashMap<Integer,String> activity_table;
HashMap<Integer,String> client_table;
HashMap<Integer,String> employee_table;

// Resultset Returned by queries 
private ResultSet result;

// Strings needed to set connection
String url = "jdbc:mysql://localhost:3306/financial_documents?useUnicode=yes&characterEncoding=UTF-8";
String dbName = "financial_documents";
String driver = "com.mysql.jdbc.Driver";
String userName = "root"; 
String password = "";

public DataBase(){

    code_table = new HashMap<>();
    activity_table = new HashMap<>();
    client_table = new HashMap<>();
    employee_table = new HashMap<>();
    Initialize();

}

/**
 * Set variables and objects for this class.
 */
private void Initialize(){

    System.out.println("Loading driver..."); 
    try {
        Class.forName(driver);
        System.out.println("Driver loaded!"); 
    } catch (ClassNotFoundException e) { 
        throw new IllegalStateException("Cannot find the driver in the classpath!", e); 
    }

    System.out.println("Connecting database...");

try (Connection connect = DriverManager.getConnection(url,userName,password)) {
            System.out.println("Database connected!");
            //Get tables' information 
            selectCodeTableQueryArray(connect);
           // System.out.println("HshMap Print:");
           // printCodeTableQueryArray();

            selectActivityTableQueryArray(connect);
           // System.out.println("HshMap Print:");
           // printActivityTableQueryArray(); 

            selectClientTableQueryArray(connect);
           // System.out.println("HshMap Print:");
           // printClientTableQueryArray();

            selectEmployeeTableQueryArray(connect);
           // System.out.println("HshMap Print:");
           // printEmployeeTableQueryArray();

            connect.close();
    }catch (SQLException e) { 
        throw new IllegalStateException("Cannot connect the database!", e);
    }

} 

/**
 * Write Queries 
 * @param s
 * @return 
 */
public boolean insertQuery(String s){

    boolean ret = false;
    System.out.println("Loading driver..."); 
    try {
        Class.forName(driver);
        System.out.println("Driver loaded!"); 
    } catch (ClassNotFoundException e) { 
        throw new IllegalStateException("Cannot find the driver in the classpath!", e); 
    }

    System.out.println("Connecting database...");

try (Connection connect = DriverManager.getConnection(url,userName,password)) {
            System.out.println("Database connected!");
            //Set tables' information 
            try {
                Statement st = connect.createStatement();
                int val = st.executeUpdate(s);
                if(val==1){ 
                    System.out.print("Successfully inserted value");
                    ret = true;
                }
                else{ 
                    System.out.print("Unsuccessful insertion");
                    ret = false;
                }
                st.close();
            } catch (SQLException ex) {
                Logger.getLogger(DataBase.class.getName()).log(Level.SEVERE, null, ex);
            }
            connect.close();
    }catch (SQLException e) { 
        throw new IllegalStateException("Cannot connect the database!", e);
    } 
    return ret;
}

/**
 * Query needed to get code table's data
 * @param c
 * @return 
 */
private void selectCodeTableQueryArray(Connection c) {
    try {
        Statement st = c.createStatement();
        ResultSet res = st.executeQuery("SELECT * FROM  code;");
        while (res.next()) {
                int id = res.getInt("code_number");
                String msg = res.getString("code_statement");
                code_table.put(id, msg);
            }
        st.close();
    } catch (SQLException ex) {
        Logger.getLogger(DataBase.class.getName()).log(Level.SEVERE, null, ex);
    }
}

private void printCodeTableQueryArray() {
    for (HashMap.Entry<Integer ,String> entry : code_table.entrySet()){
        System.out.println("Key : " + entry.getKey() + " Value : " + entry.getValue());
    }
}

/**
 * Query needed to get activity table's data
 * @param c
 * @return 
 */
private void selectActivityTableQueryArray(Connection c) {
    try {
        Statement st = c.createStatement();
        ResultSet res = st.executeQuery("SELECT * FROM  activity;");
        while (res.next()) {
                int id = res.getInt("activity_number");
                String msg = res.getString("activity_statement");
                activity_table.put(id, msg);
            }
        st.close();
    } catch (SQLException ex) {
        Logger.getLogger(DataBase.class.getName()).log(Level.SEVERE, null, ex);
    }
}

private void printActivityTableQueryArray() {
    for (HashMap.Entry<Integer ,String> entry : activity_table.entrySet()){
        System.out.println("Key : " + entry.getKey() + " Value : " + entry.getValue());
    }
}

/**
 * Query needed to get client table's data
 * @param c
 * @return 
 */
private void selectClientTableQueryArray(Connection c) {
    try {
        Statement st = c.createStatement();
        ResultSet res = st.executeQuery("SELECT * FROM  client;");
        while (res.next()) {
                int id = res.getInt("client_number");
                String msg = res.getString("client_full_name");
                client_table.put(id, msg);
            }
        st.close();
    } catch (SQLException ex) {
        Logger.getLogger(DataBase.class.getName()).log(Level.SEVERE, null, ex);
    }
}

private void printClientTableQueryArray() {
    for (HashMap.Entry<Integer ,String> entry : client_table.entrySet()){
        System.out.println("Key : " + entry.getKey() + " Value : " + entry.getValue());
    }
}

/**
 * Query needed to get activity table's data
 * @param c
 * @return 
 */
private void selectEmployeeTableQueryArray(Connection c) {
    try {
        Statement st = c.createStatement();
        ResultSet res = st.executeQuery("SELECT * FROM  employee;");
        while (res.next()) {
                int id = res.getInt("employee_number");
                String msg = res.getString("employee_full_name");
                employee_table.put(id, msg);
            }
        st.close();
    } catch (SQLException ex) {
        Logger.getLogger(DataBase.class.getName()).log(Level.SEVERE, null, ex);
    }
}

private void printEmployeeTableQueryArray() {
    for (HashMap.Entry<Integer ,String> entry : employee_table.entrySet()){
        System.out.println("Key : " + entry.getKey() + " Value : " + entry.getValue());
    }
} 
}

I hope this could be a little help.

If you really need to modify the original dictionary:

empty_keys = [k for k,v in metadata.iteritems() if not v]
for k in empty_keys:
    del metadata[k]

Note that we have to make a list of the empty keys because we can't modify a dictionary while iterating through it (as you may have noticed). This is less expensive (memory-wise) than creating a brand-new dictionary, though, unless there are a lot of entries with empty values.

You can also do using CTE with clause.

WITH maps AS (Select ROW_NUMBER() OVER (ORDER BY Id) AS rownum,* 
from maps006 )

SELECT rownum, * FROM maps  WHERE rownum >49 and rownum <101  

Another solution: calculate sum of days in month for next n month and add result to current date.

import calendar
import datetime

def date_from_now(months):
    today = datetime.datetime.today()

    month = today.month
    year = today.year
    sum_days = 0

    for i in range(int(months)):
        month += 1

        if month == 13:
            month = 1
            year += 1

        sum_days += calendar.monthrange(year, month)[1]

    return datetime.date.today() + datetime.timedelta(sum_days)

print(date_from_now(12)) # if to day is 2017-01-01, output: 2019-01-01 

In Kotlin you can do this...

Service:

class MyService : Service() {
    init {
        instance = this
    }

    companion object {
        lateinit var instance: MyService

        fun terminateService() {
            instance.stopSelf()
        }
    }
}

In your activity (or anywhere in your app for that matter):

btn_terminate_service.setOnClickListener {
    MyService.terminateService()
}

Note: If you have any pending intents showing a notification in Android's status bar, you may want to terminate that as well.

pixels = np.array(pixels) in this line you reassign pixels. So, it may not a list anyhow. Though pixels is not a list it has no attributes append. Does it make sense?

This works for me with simple CSS properties:

.container {
    -ms-overflow-style: none;  // Internet Explorer 10+
    scrollbar-width: none;  // Firefox
}
.container::-webkit-scrollbar { 
    display: none;  // Safari and Chrome
}

For older versions of Firefox, use: overflow: -moz-scrollbars-none;

export const a = 1;
export const b = 2;
export const c = 3;

This will work w/ Babel transforms today and should take advantage of all the benefits of ES2016 modules whenever that feature actually lands in a browser.

You can also add export default {a, b, c}; which will allow you to import all the values as an object w/o the * as, i.e. import myModule from 'my-module';

Sources:

• https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Statements/export

• http://www.2ality.com/2014/09/es6-modules-final.html

$unit1 = "paragrahp1";             
$unit2 = "paragrahp2";  
echo '<p>'.$unit1.'</p>';  
echo '<p>'.$unit2.'</p>';

Use Tag <p> always when starting with a new line so you don't need to use /n type syntax.

1. List out all available dbs show dbs
2. Choose the necessary db use
3. Drop the database db.dropDatabase() //Few additional commands
4. List all collections available in a db show collections
5. Remove a specification collection db.collection.drop()

Hope that helps

I had the same problem. For me the reason was that I was using the same bridging-header for both my App and my Today Extension. My Today Extension does not include Parse, but because it was defined in the bridging-header it was trying to look for it. I created a new bridging-header for my Today Extension and the error dissapeared.

The most efficient and easy way:

list(data_set.to_records())

You can filter the columns you need before this call.

I use this to open a workbook and then copy that workbook's data to the template.

Private Sub CommandButton24_Click()
Set Template = ActiveWorkbook
 With Application.FileDialog(msoFileDialogOpen)
    .InitialFileName = "I:\Group - Finance" ' Yu can select any folder you want
    .Filters.Clear
    .Title = "Your Title"
    If Not .Show Then
        MsgBox "No file selected.": Exit Sub
    End If
    Workbooks.OpenText .SelectedItems(1)

'The below is to copy the file into a new sheet in the workbook and paste those values in sheet 1

    Set myfile = ActiveWorkbook
    ActiveWorkbook.Sheets(1).Copy after:=ThisWorkbook.Sheets(1)
    myfile.Close
    Template.Activate
    ActiveSheet.Cells.Select
    Selection.Copy
    Sheets("Sheet1").Select
    Cells.Select
    ActiveSheet.Paste

End With

Consider building an Add-on that has an actual button and not using the outdated method of linking an image to a script function.

In the script editor, under the Help menu >> Welcome Screen >> link to Google Sheets Add-on - will give you sample code to use.

You should use System.Windows.Controls.UserControl's FindResource() or TryFindResource() methods.

Also, a good practice is to create a string constant which maps the name of your key in the resource dictionary (so that you can change it at only one place).

SELECT Username, date, value
 from MyTable mt
 inner join (select username, max(date) date
              from MyTable
              group by username) sub
  on sub.username = mt.username
   and sub.date = mt.date

Would address the updated problem. It might not work so well on large tables, even with good indexing.

Sample code to render system time in a specific time zone and a specific format.

import java.text.SimpleDateFormat;
import java.util.Calendar;
import java.util.Date;
import java.util.TimeZone;

public class TimZoneTest {
    public static void main (String[] args){
        //<GMT><+/-><hour>:<minutes>
        // Any screw up in this format, timezone defaults to GMT QUIETLY. So test your format a few times.

        System.out.println(my_time_in("GMT-5:00", "MM/dd/yyyy HH:mm:ss") );
        System.out.println(my_time_in("GMT+5:30", "'at' HH:mm a z 'on' MM/dd/yyyy"));

        System.out.println("---------------------------------------------");
        // Alternate format 
        System.out.println(my_time_in("America/Los_Angeles", "'at' HH:mm a z 'on' MM/dd/yyyy") );
        System.out.println(my_time_in("America/Buenos_Aires", "'at' HH:mm a z 'on' MM/dd/yyyy") );


    }

    public static String my_time_in(String target_time_zone, String format){
        TimeZone tz = TimeZone.getTimeZone(target_time_zone);
        Date date = Calendar.getInstance().getTime();
        SimpleDateFormat date_format_gmt = new SimpleDateFormat(format);
        date_format_gmt.setTimeZone(tz);
        return date_format_gmt.format(date);
    }

}

Output

10/08/2011 21:07:21
at 07:37 AM GMT+05:30 on 10/09/2011
at 19:07 PM PDT on 10/08/2011
at 23:07 PM ART on 10/08/2011

The onMessageReceived method is fired only when app is in foreground or the notification payload only contains the data type.

From the Firebase docs

For downstream messaging, FCM provides two types of payload: notification and data.

For notification type, FCM automatically displays the message to end-user devices on behalf of the client app. Notifications have a predefined set of user-visible keys.
For data type, client app is responsible for processing data messages. Data messages have only custom key-value pairs.

Use notifications when you want FCM to handle displaying a notification on your client app's behalf. Use data messages when you want your app to handle the display or process the messages on your Android client app, or if you want to send messages to iOS devices when there is a direct FCM connection.

Further down the docs

App behaviour when receiving messages that include both notification and data payloads depends on whether the app is in the background or the foreground—essentially, whether or not it is active at the time of receipt.
When in the background, apps receive the notification payload in the notification tray, and only handle the data payload when the user taps on the notification.
When in the foreground, your app receives a message object with both payloads available.

If you are using the firebase console to send notifications, the payload will always contain the notification type. You have to use the Firebase API to send the notification with only the data type in the notification payload. That way your app is always notified when a new notification is received and the app can handle the notification payload.

If you want to play notification sound when app is in background using the conventional method, you need to add the sound parameter to the notification payload.

If you see an out of memory, consider if that is plausible: Do you really need that much memory? If not (i.e. when you don't have huge objects and if you don't need to create millions of objects for some reason), chances are that you have a memory leak.

In Java, this means that you're keeping a reference to an object somewhere even though you don't need it anymore. Common causes for this is forgetting to call close() on resources (files, DB connections, statements and result sets, etc.).

If you suspect a memory leak, use a profiler to find which object occupies all the available memory.

If you call it the way you had it...

$('.leadtoscore').click(add_event('shot'));

...you would need to have add_event() return a function, like...

function add_event(param) {
    return function() {
                // your code that does something with param
                alert( param );
           };
}

The function is returned and used as the argument for .click().

$str = preg_replace('/\?\//', '?', $str);

Edit: See CMS' answer. It's late, I should know better.

std::pair already has the required comparison operators, which perform lexicographical comparisons using both elements of each pair. To use this, you just have to provide the comparison operators for types for types K and V.

Also bear in mind that std::sort requires a strict weak ordeing comparison, and <= does not satisfy that. You would need, for example, a less-than comparison < for K and V. With that in place, all you need is

std::vector<pair<K,V>> items; 
std::sort(items.begin(), items.end()); 

If you really need to provide your own comparison function, then you need something along the lines of

template <typename K, typename V>
bool comparePairs(const std::pair<K,V>& lhs, const std::pair<K,V>& rhs)
{
  return lhs.first < rhs.first;
}

You can use - matplotlib.gridspec.GridSpec

Check - https://matplotlib.org/stable/api/_as_gen/matplotlib.gridspec.GridSpec.html

The below code displays a heatmap on right and an Image on left.

#Creating 1 row and 2 columns grid
gs = gridspec.GridSpec(1, 2) 
fig = plt.figure(figsize=(25,3))

#Using the 1st row and 1st column for plotting heatmap
ax=plt.subplot(gs[0,0])
ax=sns.heatmap([[1,23,5,8,5]],annot=True)

#Using the 1st row and 2nd column to show the image
ax1=plt.subplot(gs[0,1])
ax1.grid(False)
ax1.set_yticklabels([])
ax1.set_xticklabels([])

#The below lines are used to display the image on ax1
image = io.imread("https://images-na.ssl-images- amazon.com/images/I/51MvhqY1qdL._SL160_.jpg")

plt.imshow(image)
plt.show()

Output image

I think i know what you mean, if you want to send an array through a URL you can use serialize

for example:

$foo = array(1,2,3);
$serialized_array = serialize($foo);
$url = "http://www.foo.whatever/page.php?vars=".urlencode($serialized_array);

and on page.php

$vars = unserialize($_GET['vars']);