Programs & Examples On #Openstep

You can use Convert.ToBase64String to convert 16 byte output of MD5 to a ~24 char string. A little bit better without reducing security. (j9JIbSY8HuT89/pwdC8jlw== for your example)

Don't forget about spaces:

source=""
samples=("")
if [ $1 = "country" ]; then
   source="country"
   samples="US Canada Mexico..."
else
  echo "try again"
fi

public static String getQueryMap(String query) {        
    String[] params = query.split("&");     
    for (String param : params) {           
       String name = param.split("=")[0];
       if ("YourParam".equals(name)) {
           return param.split("=")[1]; 
       }
    }
    return null;
}

The for-in statement iterates over the enumerable properties of an object, in arbitrary order.

The loop will iterate over all enumerable properties of the object itself and those the object inherits from its constructor's prototype

You can think of it as "for in" basically iterates and list out all the keys.

var str = 'abc';
var arrForOf = [];
var arrForIn = [];

for(value of str){
  arrForOf.push(value);
}

for(value in str){
  arrForIn.push(value);
}

console.log(arrForOf); 
// ["a", "b", "c"]
console.log(arrForIn); 
// ["0", "1", "2", "formatUnicorn", "truncate", "splitOnLast", "contains"]

This appears to be a more general SWING/AWT/JDK problem that just the JBOSS installer:

The accepted answer below solved the issue for me :

Unable to run java gui programs with ubuntu

("sudo apt-get install openjdk-6-jdk")

I'd say like letiagoalves said, but you might have more than one checkbox question in your form, so I'd recommend to do like this:

  var limit = 3;
    $('input.single-checkbox').on('change', function(evt) {
        if($('input.single-checkbox').siblings('input.single-checkbox:checked').length > limit) {
            this.checked = false;
        }
    });

$(function() {
    $('.phrase .items').each(function(i, items_list){
        var myText = "";

        $(items_list).find('li').each(function(j, li){
            alert(li.text());
        })

        alert(myText);

    });
};

As a humble beginner in the world of programming, and flicking through all the answers here after seeing this word used a lot in apparently slightly different ways in different places, I found reading the Wikipedia page on Bootstrapping (duh! I didn't think of it either at first) is very informative to understand differences in use of this word. Could it be......on extremely rare occasions......Wikipedia might even have better explanations of certain terms than....(redacted)? Will they bring in rep points on Wikipedia though?

To me, it seems all the meanings something to do with: start with something as simple as possible Thing1, make something slightly more complex with that Thing2, and now you can use Thing2 to do some kind of tasks more efficiently and quickly than you could originally with Thing1. Then repeat from Thing2 to Thing 3 ad infinitum...

I see it as closely connected to both biological evolution and 'Layers of Abstraction' (newbies like me see, ahem, Wikipedia, cough) - the evolution from 1940's computers with switches, machine code, Assembly, C, Python, AIs you can give all kinds of complex instructions to like "make the %4^% dinner to my default &^$% requirements and clean the floor you %$£"@:~" in drunken slang English or Amazon tribal dialect without them 'raising an exception' (for newbies again...you guessed it) - missed out lot of links there due to simple ignorance.

Then in certain specific software meanings: Meaning1: Thing1 is used to load latest version of Thing2 (because of course Thing2 will be bigger than Thing1, just as Thing3 will be be bigger than Thing2).

Meaning2: Thing1 is a lower level language (closer to 1001011100....011001 than print("Hello, ", user.name)) used to write a little bit of the higher language of Thing2, then this little bit of Thing2 is used to expand Thing2 itself from baby vocabulary level towards adult vocabulary level (Thing2 starts to be processed, or to use correct technical term 'compiled', by the baby version of itself (it's a clever baby!), whereas the baby version of Thing2 itself could of course only be compiled by Thing1, cause it can't exist before it exists, right duh!), then child version of Thing2 compiles Surly Teenager version of Thing2, at which point programming community decides whether Surly Teenager's 'issues' (software term and metaphor term!) are worth spending enough time resolving to be accepted long term, or to abandon them to (not sure where to take the analogy here).

If yes, then Thing2 has 'Bootstrapped' itself (possibly a few times) from babyhood to adulthood: "the child is the father of the man" (Wordsworth, suggest don't try looking up the quote or the author on Stack Overflow).

I will explain you this with a practical example and no theory stuff:

A developer writes the code. No GUI is implemented yet. The testing at this level verifies that the functions work correctly and the data types are correct. This phase of testing is called Unit testing.

When a GUI is developed, and application is assigned to a tester, he verifies business requirements with a client and executes the different scenarios. This is called functional testing. Here we are mapping the client requirements with application flows.

Integration testing: let's say our application has two modules: HR and Finance. HR module was delivered and tested previously. Now Finance is developed and is available to test. The interdependent features are also available now, so in this phase, you will test communication points between the two and will verify they are working as requested in requirements.

Regression testing is another important phase, which is done after any new development or bug fixes. Its aim is to verify previously working functions.

Press " ? + Shift + A" on Mac (or "Ctrl+Shift+A" on Windows) and in the pop-up EditText, write "Sync Project with Gradle Files". After that double click on the appeared option. It will then sync your Gradle file SDK with the project file.

This question is very useful in practice. It's only necessary to list every explicit columns in software programming, where you pay particular careful to deal with all conditions.

Imagine when debugging, or, try to use DBMS as daily office tool, instead of something alterable implementation of specific programmer's abstract underlying infrastructure, we need to code a lot of SQLs. The scenario can be found everywhere, like database conversion, migration, administration, etc. Most of these SQLs will be executed only once and never be used again, give the every column names is just waste of time. And don't forget the invention of SQL isn't only for the programmers use.

Usually I will create a utility view with column names prefixed, here is the function in pl/pgsql, it's not easy but you can convert it to other procedure languages.

-- Create alias-view for specific table.

create or replace function mkaview(schema varchar, tab varchar, prefix varchar)
    returns table(orig varchar, alias varchar) as $$
declare
    qtab varchar;
    qview varchar;
    qcol varchar;
    qacol varchar;
    v record;
    sql varchar;
    len int;
begin
    qtab := '"' || schema || '"."' || tab || '"';
    qview := '"' || schema || '"."av' || prefix || tab || '"';
    sql := 'create view ' || qview || ' as select';

    for v in select * from information_schema.columns
            where table_schema = schema and table_name = tab
    loop
        qcol := '"' || v.column_name || '"';
        qacol := '"' || prefix || v.column_name || '"';

        sql := sql || ' ' || qcol || ' as ' || qacol;
        sql := sql || ', ';

        return query select qcol::varchar, qacol::varchar;
    end loop;

    len := length(sql);
    sql := left(sql, len - 2); -- trim the trailing ', '.
    sql := sql || ' from ' || qtab;

    raise info 'Execute SQL: %', sql;
    execute sql;
end
$$ language plpgsql;

Examples:

-- This will create a view "avp_person" with "p_" prefix to all column names.
select * from mkaview('public', 'person', 'p_');

select * from avp_person;

You're calculating the y-part of your new coordinate based on the 'new' x-part of the new coordinate. Basically this means your calculating the new output in terms of the new output...

Try to rewrite in terms of input and output:

vector2<double> multiply( vector2<double> input, double cs, double sn ) {
  vector2<double> result;
  result.x = input.x * cs - input.y * sn;
  result.y = input.x * sn + input.y * cs;
  return result;
}

Then you can do this:

vector2<double> input(0,1);
vector2<double> transformed = multiply( input, cs, sn );

Note how choosing proper names for your variables can avoid this problem alltogether!

PHP's Laravel framework, I am using search first_name, last_name Fields consider like Full Name Search

Using || symbol Or concat_ws(), concat() methods

$names = str_replace(" ", "", $searchKey);                               
$customers = Customer::where('organization_id',$this->user->organization_id)
             ->where(function ($q) use ($searchKey, $names) {
                 $q->orWhere('phone_number', 'ilike', "%{$searchKey}%"); 
                 $q->orWhere('email', 'ilike', "%{$searchKey}%");
                 $q->orWhereRaw('(first_name || last_name) LIKE ? ', '%' . $names. '%');
    })->orderBy('created_at','desc')->paginate(20);

This worked charm!!!

A method for future reference is something like this. bannedphraseform is the first form and expectedphraseform is the second. If the first one is hit, the second one is skipped (which is a reasonable assumption in this case):

if request.method == 'POST':
    bannedphraseform = BannedPhraseForm(request.POST, prefix='banned')
    if bannedphraseform.is_valid():
        bannedphraseform.save()
else:
    bannedphraseform = BannedPhraseForm(prefix='banned')

if request.method == 'POST' and not bannedphraseform.is_valid():
    expectedphraseform = ExpectedPhraseForm(request.POST, prefix='expected')
    bannedphraseform = BannedPhraseForm(prefix='banned')
    if expectedphraseform.is_valid():
        expectedphraseform.save()

else:
    expectedphraseform = ExpectedPhraseForm(prefix='expected')

You will have to save the relationship on the server side. The value is the only part that is transmitted when the form is posted. You could do something nasty like...

<option value="2|Dog">Dog</option>

Then split the result apart if you really wanted to, but that is an ugly hack and a waste of bandwidth assuming the numbers are truly unique and have a one to one relationship with the text.

The best way would be to create an array, and loop over the array to create the HTML. Once the form is posted you can use the value to look up the text in that same array.

The author appears to have taken a freemium approach to the font library and provides Black Tie to give different weights to the Font-Awesome library.

Usually in case of "ImagePullBackOff" it's retried after few seconds/minutes. In case you want to try again manually you can delete the old pod and recreate the pod. The one line command to delete and recreate the pod would be:

kubectl replace --force -f <yml_file_describing_pod>

Either use window.onload this way

<script>
    window.onload = function() {
        // ...
    }
</script>

or alternatively

<script>
    window.onload = functionName;
</script>

(yes, without the parentheses)

Or just put the script at the very bottom of page, right before </body>. At that point, all HTML DOM elements are ready to be accessed by document functions.

<body>
    ...

    <script>
        functionName();
    </script>
</body>

:sh then ctrl+d to get back in (bash)

Update:

You could map ctrl+d in vim to run :sh, which allows you to toggle between bash and vim quickly.

noremap <C-d> :sh<cr>

You could use Unity Builds.

??

You can do that using count:

my_dict = {i:MyList.count(i) for i in MyList}

>>> print my_dict     #or print(my_dict) in python-3.x
{'a': 3, 'c': 3, 'b': 1}

Or using collections.Counter:

from collections import Counter

a = dict(Counter(MyList))

>>> print a           #or print(a) in python-3.x
{'a': 3, 'c': 3, 'b': 1}

In one line:

$('#selector').clone().attr('id','newid').appendTo('#newPlace');

Another option that you can use is:

onclick="if(confirm('Do you have sure ?')){}else{return false;};"

using this function on submit button you will get what you expect.

Try code below:

  console.log(event['target'].value)

it works for me :-)

edit 2018: This is outdated, js and typescript now have for..of loops.
http://www.typescriptlang.org/docs/handbook/iterators-and-generators.html

The book "TypeScript Revealed" says

"You can iterate through the items in an array by using either for or for..in loops as demonstrated here:

// standard for loop
for (var i = 0; i < actors.length; i++)
{
  console.log(actors[i]);
}

// for..in loop
for (var actor in actors)
{
  console.log(actor);
}

"

Turns out, the second loop does not pass the actors in the loop. So would say this is plain wrong. Sadly it is as above, loops are untouched by typescript.

map and forEach often help me and are due to typescripts enhancements on function definitions more approachable, lke at the very moment:

this.notes = arr.map(state => new Note(state));

My wish list to TypeScript;

1. Generic collections
2. Iterators (IEnumerable, IEnumerator interfaces would be best)

/***Your Code***/
public void paintComponent(Graphics g){
/***Your Code***/
    g.setColor(Color.RED);
    g.fillOval(50,50,20,20);
}

g.fillOval(x-axis,y-axis,width,height);

A cheap and easy workaround for it is that you can just put a value which is bigger than 11001 in the FEATURE_BROWSER_EMULATION key. Then it takes the latest IE that is available in the system.

When you want to destroy a session completely, you need to do more then just

session_destroy();

First, you should unset any session variables. Then you should destroy the session followed by closing the write of the session. This can be done by the following:

<?php
session_start();
unset($_SESSION);
session_destroy();
session_write_close();
header('Location: /');
die;
?>

The reason you want have a separate script for a logout is so that you do not accidently execute it on the page. So make a link to your logout script, then the header will redirect to the root of your site.

Edit:

You need to remove the () from your exit code near the top of your script. it should just be

exit;

Since the text that you are escaping will appear in an HTML attribute, you must be sure to escape not only HTML entities but also HTML attributes:

var ESC_MAP = {
    '&': '&',
    '<': '&lt;',
    '>': '&gt;',
    '"': '&quot;',
    "'": '&#39;'
};

function escapeHTML(s, forAttribute) {
    return s.replace(forAttribute ? /[&<>'"]/g : /[&<>]/g, function(c) {
        return ESC_MAP[c];
    });
}

Then, your escaping code becomes var user_id = escapeHTML(id, true).

For more information, see Foolproof HTML escaping in Javascript.

Just right click on that column and select properties and write getdate()in Default value or binding.like image:

If you want do it in CodeFirst in EF you should add this attributes befor of your column definition:

[Databasegenerated(Databaseoption.computed)]

this attributes can found in System.ComponentModel.Dataannotion.Schema.

In my opinion first one is better:))

I've been searching for a workaround for this for a bit - and the only thing I have found is to use URL rewrites to read the "anchor". I found in the apache docs here http://httpd.apache.org/docs/2.2/rewrite/advanced.html the following...

By default, redirecting to an HTML anchor doesn't work, because mod_rewrite escapes the # character, turning it into %23. This, in turn, breaks the redirection.

Solution: Use the [NE] flag on the RewriteRule. NE stands for No Escape.

Discussion: This technique will of course also work with other special characters that mod_rewrite, by default, URL-encodes.

It may have other caveats and what not ... but I think that at least doing something with the # on the server is possible.

You could set echo to on:

set echo on
REM Querying table
select * from dual;

In SQLDeveloper, hit F5 to run as a script.

Using wget

wget -O /tmp/myfile 'http://www.google.com/logo.jpg'

or curl:

curl -o /tmp/myfile 'http://www.google.com/logo.jpg'

The following works on 2008R2+ to produce 'HH:MM':

select
case
when len(replace(replace(replace(right(cast(getdate() as varchar),7),'AM',''),'PM',''),' ','')) = 4
then '0'+ replace(replace(replace(right(cast(getdate() as varchar),7),'AM',''),'PM',''),' ','')
else replace(replace(replace(right(cast(getdate() as varchar),7),'AM',''),'PM',''),' ','') end as [Time]

A variation would be to use SELECT COUNT(*) instead of SELECT NAME, i.e.

SELECT count(*) FROM sqlite_master WHERE type='table' AND name='table_name';

This will return 0, if the table doesn't exist, 1 if it does. This is probably useful in your programming since a numerical result is quicker / easier to process. The following illustrates how you would do this in Android using SQLiteDatabase, Cursor, rawQuery with parameters.

boolean tableExists(SQLiteDatabase db, String tableName)
{
    if (tableName == null || db == null || !db.isOpen())
    {
        return false;
    }
    Cursor cursor = db.rawQuery(
       "SELECT COUNT(*) FROM sqlite_master WHERE type = ? AND name = ?",
       new String[] {"table", tableName}
    );
    if (!cursor.moveToFirst())
    {
        cursor.close();
        return false;
    }
    int count = cursor.getInt(0);
    cursor.close();
    return count > 0;
}

In case anyone needed the above in swift :

SWIFT 3.0 and above :

this will capitalize your string, make the first letter capital :

viewNoteDateMonth.text  = yourString.capitalized

this will uppercase your string, make all the string upper case :

viewNoteDateMonth.text  = yourString.uppercased()

From Java 9, you can use the stream provided by Matcher.results()

long matches = matcher.results().count();

You can also check if there is a currentUser

var user = firebase.auth().currentUser;

if (user) {
  // User is signed in.
} else {
  // No user is signed in.
}

I know this is a resolved old topic, but I just answered a similar question, and though my answer could help someone else as it covers other solution options:

Click events work a little differently on touch enabled devices. There is no mouse, so technically there is no click. According to this article - http://www.quirksmode.org/blog/archives/2010/09/click_event_del.html - due to memory limitations, click events are only emulated and dispatched from anchor and input elements. Any other element could use touch events, or have click events manually initialized by adding a handler to the raw html element, for example, to force click events on list items:

$('li').each(function(){
    this.onclick = function() {}
});

Now click will be triggered by li, therefore can be listened by jQuery.

On your case, you could just change the listener to the anchor element as very well put by @mason81, or use a touch event on the li:

$('.menu').on('touchstart', '.publications', function(){
    $('#filter_wrapper').show();
});

Here is a fiddle with a few experiments - http://jsbin.com/ukalah/9/edit

You have two choices: stash your changes:

git stash

then later to get them back:

git stash apply

or put your changes on a branch so you can get the remote branch and then merge your changes onto it. That's one of the greatest things about git: you can make a branch, commit to it, then fetch other changes on to the branch you were on.

You say it doesn't make any sense, but you are only doing it so you can merge them at will after doing the pull. Obviously your other choice is to commit on your copy of the branch and then do the pull. The presumption is you either don't want to do that (in which case I am puzzled that you don't want a branch) or you are afraid of conflicts.

You can use find and -exec directly into sed rather than first locating oldstr with grep. It's maybe a bit less efficient, but that might not be important. This way, the sed replacement is executed over all files listed by find, but if oldstr isn't there it obviously won't operate on it.

find /path -type f -exec sed -i 's/oldstr/newstr/g' {} \;

a reply to @DarinDimitrov for a case where i have used foreach in a razor view.

<li><label for="category">Category</label>
        <select id="category">
            <option value="0">All</option>
            @foreach(Category c in Model.Categories)
            {
                <option title="@c.Description" value="@c.CategoryID">@c.Name</option>
            }
        </select>
</li>

How can I know that what is the problem

Easy. Refer to the error log of the webserver.

how can I get the actual problem to display to the user ?

NEVER do it.
An average user will unerstand nothing of this error.
A malicious user should get no feedback, especially in a form of very informative error message.

Just show a page with excuses.

If you don't have access to the server's error log, your task become more complicated.
There are several ways to get in touch with error messages.

To display error messages on screen you can add these lines to the code

ini_set('display_errors',1);
error_reporting(E_ALL);

or to make custom error logfile

ini_set('log_errors',1);
ini_set('error_log','/absolute/path/tp/log_file');

and there are some other ways.
but you must understand that without actual error message you can't move. It's hard to be blind in the dark

I think you can assume, that name is unique and all radio in group has the same name. Then you can use jQuery support like that:

$("[name=gender]").val(["Male"]);

Note: Passing array is important.

Conditioned version:

if (!$("[name=gender]:checked").length) {
    $("[name=gender]").val(["Male"]);
}

svn delete --keep-local the_file

Use align-items: stretch

Similar to David Storey's answer, my workaround is:

.flex-2 {
    display: flex;
    align-items: stretch;
}

Note that height: 100% should be removed from the child component even (see comments).

Alternatively to align-items, you can use align-self just on the .flex-2-child item you want stretched.

Try to avoid conversion of variable to str(variable). Sometimes, It may cause the issue.

Simple tip to avoid :

try: 
    data=str(data)
except:
    data = data #Don't convert to String

The above example will solve Encode error also.

You can list the commits by:

git cherry -v

And then compare with the following command where the number of ^ equals to the number of commits (in the example its 2 commits):

git diff HEAD^^

• X-XSS-Protection: 1 : Force XSS protection (useful if XSS protection was disabled by the user)

• X-XSS-Protection: 0 : Disable XSS protection

• The token mode=block will prevent browser (IE8+ and Webkit browsers) to render pages (instead of sanitizing) if a potential XSS reflection (= non-persistent) attack is detected.

/!\ Warning, mode=block creates a vulnerability in IE8 (more info).

More informations : http://blogs.msdn.com/b/ie/archive/2008/07/02/ie8-security-part-iv-the-xss-filter.aspx and http://blog.veracode.com/2014/03/guidelines-for-setting-security-headers/

For multiple way points, following can be used as well.

Intent intent = new Intent(android.content.Intent.ACTION_VIEW, 
    Uri.parse("https://www.google.com/maps/dir/48.8276261,2.3350114/48.8476794,2.340595/48.8550395,2.300022/48.8417122,2.3028844"));
startActivity(intent);

First set of coordinates are your starting location. All of the next are way points, plotted route goes through.

Just keep adding way points by concating "/latitude,longitude" at the end. There is apparently a limit of 23 way points according to google docs. Not sure if that applies to Android too.

You can try ng-file-upload angularjs plugin (instead of ng-upload).

It's fairly easy to setup and deal with angularjs specifics. It also supports progress, cancel, drag and drop and is cross browser.

html

<!-- Note: MUST BE PLACED BEFORE angular.js-->
<script src="ng-file-upload-shim.min.js"></script> 
<script src="angular.min.js"></script>
<script src="ng-file-upload.min.js"></script> 

<div ng-controller="MyCtrl">
  <input type="file" ngf-select="onFileSelect($files)" multiple>
</div>

JS:

//inject angular file upload directives and service.
angular.module('myApp', ['ngFileUpload']);

var MyCtrl = [ '$scope', '$upload', function($scope, $upload) {
  $scope.onFileSelect = function($files) {
    //$files: an array of files selected, each file has name, size, and type.
    for (var i = 0; i < $files.length; i++) {
      var file = $files[i];
      $scope.upload = $upload.upload({
        url: 'server/upload/url', //upload.php script, node.js route, or servlet url
        data: {myObj: $scope.myModelObj},
        file: file,
      }).progress(function(evt) {
        console.log('percent: ' + parseInt(100.0 * evt.loaded / evt.total));
      }).then(function(response) {
        var data = response.data;
        // file is uploaded successfully
        console.log(data);
      });
    }
  };
}];

try this easy

 _x000D_
 .btn-circle span {_x000D_
     top: 0;_x000D_
   _x000D_
      position: absolute;_x000D_
     font-size: 18px;_x000D_
       text-align: center;_x000D_
    text-decoration: none;_x000D_
      -webkit-animation:spin 4s linear infinite;_x000D_
    -moz-animation:spin 4s linear infinite;_x000D_
    animation:spin 4s linear infinite;_x000D_
}_x000D_
_x000D_
.btn-circle span :hover {_x000D_
 color :silver;_x000D_
}_x000D_
_x000D_
_x000D_
/* rotate 360 key for refresh btn */_x000D_
@-moz-keyframes spin { 100% { -moz-transform: rotate(360deg); } }_x000D_
@-webkit-keyframes spin { 100% { -webkit-transform: rotate(360deg); } }_x000D_
@keyframes spin { 100% { -webkit-transform: rotate(360deg); transform:rotate(360deg); } } 

 <button type="button" class="btn btn-success btn-circle" ><span class="glyphicon">&#x21bb;</span></button>

$('#myiframe').contents().find('html').html(s); 

you can check from here http://jsfiddle.net/Y9beh/

The simplest way, based on @nosklo's comment and answer:

import tempfile
tmp = tempfile.mkdtemp()

But if you want to manually control the creation of the directories:

import os
from tempfile import gettempdir
tmp = os.path.join(gettempdir(), '.{}'.format(hash(os.times())))
os.makedirs(tmp)

That way you can easily clean up after yourself when you are done (for privacy, resources, security, whatever) with:

from shutil import rmtree
rmtree(tmp, ignore_errors=True)

This is similar to what applications like Google Chrome and Linux systemd do. They just use a shorter hex hash and an app-specific prefix to "advertise" their presence.

jQuery stores events in the following:

$("a#somefoo").data("events")

Doing a console.log($("a#somefoo").data("events")) should list the events attached to that element.

var bmp = new Bitmap(@"path\picture.bmp");
using( Graphics g = Graphics.FromImage( bmp ) )
{
    g.DrawString( ... );
}

picturebox1.Image = bmp;

I think the Wikipedia-article on Deprecation answers this one pretty well:

In the process of authoring computer software, its standards or documentation, deprecation is a status applied to software features to indicate that they should be avoided, typically because they have been superseded. Although deprecated features remain in the software, their use may raise warning messages recommending alternative practices, and deprecation may indicate that the feature will be removed in the future. Features are deprecated—rather than immediately removed—in order to provide backward compatibility, and give programmers who have used the feature time to bring their code into compliance with the new standard.

using redis-cli:

root@server:~# redis-cli 
127.0.0.1:6379> CONFIG SET requirepass secret_password
OK

this will set password temporarily (until redis or server restart)

test password:

root@server:~# redis-cli 
127.0.0.1:6379> AUTH secret_password
OK

I use Komodo Edit. Check out the Open Komodo Edit.

I'm surprised that nobody mentioned that you cannot take an address of register variable, even if compiler decides to keep variable in memory rather than in register.

So using register you win nothing (anyway compiler will decide for itself where to put the variable) and lose the & operator - no reason to use it.

The accepted answer is spot on the basic definition of horizontal vs vertical scaling. But unlike the common belief that horizontal scaling of databases is only possible with Cassandra, MongoDB, etc I would like to add that horizontal scaling is also very much possible with any traditional RDMS; that too without using any third party solutions.

I know of many companies, specially SaaS based companies that do this. This is done using simple application logic. You basically take a set of users and divide them over multiple DB servers. So for example, you would typically have a "meta" database/table that would store clients, DB server/connection strings, etc and a table that stores client/server mapping.

Then simply direct requests from each client to the DB server they are mapped to.

Now some may say this is akin to horizontal partitioning and not "true" horizontal scaling and they will be right in some ways. But the end result is that you have scaled your DB over multiple Db servers.

The only difference between the two approaches to horizontal scaling is that one approach (MongoDB, etc) the scaling is done by the DB software itself. In that sense you are "buying" the scaling. In the other approach (for RDBMS horizontal scaling), the scaling is built by application code/logic.

New answer to old question

None of the existing answers to this old question address the real problem.

The real problem was that xs:complexType cannot directly have a xs:extension as a child in XSD. The fix is to use xs:simpleContent first. Details follow...

Your XML,

<price currency="euros">20000.00</price>

will be valid against either of the following corrected XSDs:

Locally defined attribute type

<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema">

  <xs:element name="price">
    <xs:complexType>
      <xs:simpleContent>
        <xs:extension base="xs:decimal">
          <xs:attribute name="currency">
            <xs:simpleType>
              <xs:restriction base="xs:string">
                <xs:enumeration value="pounds" />
                <xs:enumeration value="euros" />
                <xs:enumeration value="dollars" />
              </xs:restriction>
            </xs:simpleType>
          </xs:attribute>
        </xs:extension>
      </xs:simpleContent>
    </xs:complexType>
  </xs:element>
</xs:schema>

Globally defined attribute type

<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema">

  <xs:simpleType name="currencyType">
    <xs:restriction base="xs:string">
      <xs:enumeration value="pounds" />
      <xs:enumeration value="euros" />
      <xs:enumeration value="dollars" />
    </xs:restriction>
  </xs:simpleType>

  <xs:element name="price">
    <xs:complexType>
      <xs:simpleContent>
        <xs:extension base="xs:decimal">
          <xs:attribute name="currency" type="currencyType"/>
        </xs:extension>
      </xs:simpleContent>
    </xs:complexType>
  </xs:element>
</xs:schema>

Notes

• As commented by @Paul, these do change the content type of price from xs:string to xs:decimal, but this is not strictly necessary and was not the real problem.
• As answered by @user998692, you could separate out the definition of currency, and you could change to xs:decimal, but this too was not the real problem.

The real problem was that xs:complexType cannot directly have a xs:extension as a child in XSD; xs:simpleContent is needed first.

A related matter (that wasn't asked but may have confused other answers):

How could price be restricted given that it has an attribute?

In this case, a separate, global definition of priceType would be needed; it is not possible to do this with only local type definitions.

How to restrict element content when element has attribute

<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema">

  <xs:simpleType name="priceType">  
    <xs:restriction base="xs:decimal">  
      <xs:minInclusive value="0.00"/>  
      <xs:maxInclusive value="99999.99"/>  
    </xs:restriction>  
  </xs:simpleType>

  <xs:element name="price">
    <xs:complexType>
      <xs:simpleContent>
        <xs:extension base="priceType">
          <xs:attribute name="currency">
            <xs:simpleType>
              <xs:restriction base="xs:string">
                <xs:enumeration value="pounds" />
                <xs:enumeration value="euros" />
                <xs:enumeration value="dollars" />
              </xs:restriction>
            </xs:simpleType>
          </xs:attribute>
        </xs:extension>
      </xs:simpleContent>
    </xs:complexType>
  </xs:element>
</xs:schema>

a:visited
{
color: #881033;
}

(or whatever color you want it to be)

text-decoration is for underlining(overlining etc. decoration ist not a valid css rule.

Create object for the class and call, if you want to call it from other pages.

$obj = new Functions();

$var = $obj->filter($_GET['params']);

Or inside the same class instances [ methods ], try this.

$var = $this->filter($_GET['params']);

You might want to use Scanner to parse through and find the specific sections you want to modify. There's also Split and StringTokenizer that may work, but at the level you're working at Scanner might be what's needed.

Here's some additional info on what the difference is between them: Scanner vs. StringTokenizer vs. String.Split

I had a similar error with the following code:-

foreach($myvar as $key => $value){
    $query = "SELECT stuff
            FROM table
            WHERE col1 = '$criteria1'
            AND col2 = '$criteria2'";

    $result = mysql_query($query) or die('Could not execute query - '.mysql_error(). __FILE__. __LINE__. $query);               
    $point_values = mysql_fetch_assoc($result);
    $top_five_actions[$key] += $point_values; //<--- Problem Line       
}

It turned out that my $point_values variable was occasionally returning false which caused the problem so I fixed it by wrapping it in mysql_num_rows check:-

if(mysql_num_rows($result) > 0) {
        $point_values = mysql_fetch_assoc($result);
        $top_five_actions[$key] += $point_values;
}

Not sure if this helps though?

Cheers

There are some processors that take an argument and I listed them below. you can change the argument as you like:

#if os(macOS) /* Checks the target operating system */

#if canImport(UIKit) /* Check if a module presents */

#if swift(<5) /* Check the Swift version */

#if targetEnvironment(simulator) /* Check envrionments like Simulator or Catalyst */

#if compiler(<7) /* Check compiler version */

Also, You can use any custom flags like DEBUG or any other flags you defined

#if DEBUG
print("Debug mode")
#endif

I'm developing a memory profiler for Python called memprof:

http://jmdana.github.io/memprof/

It allows you to log and plot the memory usage of your variables during the execution of the decorated methods. You just have to import the library using:

from memprof import memprof

And decorate your method using:

@memprof

This is an example on how the plots look like:

The project is hosted in GitHub:

https://github.com/jmdana/memprof

You can get a non-js-based redirection from an ajax call by putting in one of those meta refresh tags. This here seems to be working: return Content("<meta http-equiv=\"refresh\" content=\"0;URL='" + @Url.Action("Index", "Home") + "'\" />");

Note: I discovered that meta refreshes are auto-disabled by Firefox, rendering this not very useful.

inet_ntoa() works for IPv4; inet_ntop() works for both IPv4 and IPv6.

Given an input struct sockaddr *res, here are two snippets of code (tested on macOS):

Using inet_ntoa()

#include <arpa/inet.h>

struct sockaddr_in *addr_in = (struct sockaddr_in *)res;
char *s = inet_ntoa(addr_in->sin_addr);
printf("IP address: %s\n", s);

Using inet_ntop()

#include <arpa/inet.h>
#include <stdlib.h>

char *s = NULL;
switch(res->sa_family) {
    case AF_INET: {
        struct sockaddr_in *addr_in = (struct sockaddr_in *)res;
        s = malloc(INET_ADDRSTRLEN);
        inet_ntop(AF_INET, &(addr_in->sin_addr), s, INET_ADDRSTRLEN);
        break;
    }
    case AF_INET6: {
        struct sockaddr_in6 *addr_in6 = (struct sockaddr_in6 *)res;
        s = malloc(INET6_ADDRSTRLEN);
        inet_ntop(AF_INET6, &(addr_in6->sin6_addr), s, INET6_ADDRSTRLEN);
        break;
    }
    default:
        break;
}
printf("IP address: %s\n", s);
free(s);

Why reinvent the wheel. Just use the STL list container.

#include <list>

// in some function, you now do...
std::list<int> mylist; // integer list

More information...

It's not exactly double precision because of how IEEE 754 works, and because binary doesn't really translate well to decimal. Take a look at the standard if you're interested.

try:

[checked]="item.checked"

check out: How to Deal with Different Form Controls in Angular

Drawing an image using a QLabel seems like a bit of a kludge to me. With newer versions of Qt you can use a QGraphicsView widget. In Qt Creator, drag a Graphics View widget onto your UI and name it something (it is named mainImage in the code below). In mainwindow.h, add something like the following as private variables to your MainWindow class:

QGraphicsScene *scene;
QPixmap image;

Then just edit mainwindow.cpp and make the constructor something like this:

MainWindow::MainWindow(QWidget *parent) :
    QMainWindow(parent), ui(new Ui::MainWindow)
{
    ui->setupUi(this);

    image.load("myimage.png");
    scene = new QGraphicsScene(this);
    scene->addPixmap(image);
    scene->setSceneRect(image.rect());

    ui->mainImage->setScene(scene);
}

abarnert's answer is very good and pythonic. Another completely different route (not in python) is to let bash do this for you:

$ python myscript.py > myoutput.txt

This works in general to put all the output of a cli program (python, perl, php, java, binary, or whatever) into a file, see How to save entire output of bash script to file for more.

This may also be because you might have given classname with all letters in lowercase something which groovy (know of version 2.5.0) does not support.

class name - User is accepted but user is not.

I think this first failed because you are ordering value which is null. If Delivery is a foreign key associated table then you should include this table first, example below:

var itemList = from t in ctn.Items.Include(x=>x.Delivery)
                    where !t.Items && t.DeliverySelection
                    orderby t.Delivery.SubmissionDate descending
                    select t;

I just wanted to add a very subtle point about %%timeit. Given it runs the "magics" on the cell, you'll get error...

UsageError: Line magic function %%timeit not found

...if there is any code/comment lines above %%timeit. In other words, ensure that %%timeit is the first command in your cell.

I know it's a small point all the experts will say duh to, but just wanted to add my half a cent for the young wizards starting out with magic tricks.

Use the TABLOCKX lock hint for your transaction. See this article for more information on locking.

.timeline {_x000D_
  list-style: none;_x000D_
  padding: 20px 0 20px;_x000D_
  position: relative;_x000D_
}_x000D_
_x000D_
.timeline:before {_x000D_
  top: 0;_x000D_
  bottom: 0;_x000D_
  position: absolute;_x000D_
  content: " ";_x000D_
  width: 3px;_x000D_
  background-color: #eeeeee;_x000D_
  left: 50%;_x000D_
  margin-left: -1.5px;_x000D_
}_x000D_
_x000D_
.timeline > li {_x000D_
  margin-bottom: 20px;_x000D_
  position: relative;_x000D_
}_x000D_
_x000D_
.timeline > li:before,_x000D_
.timeline > li:after {_x000D_
  content: " ";_x000D_
  display: table;_x000D_
}_x000D_
_x000D_
.timeline > li:after {_x000D_
  clear: both;_x000D_
}_x000D_
_x000D_
.timeline > li:before,_x000D_
.timeline > li:after {_x000D_
  content: " ";_x000D_
  display: table;_x000D_
}_x000D_
_x000D_
.timeline > li:after {_x000D_
  clear: both;_x000D_
}_x000D_
_x000D_
.timeline > li > .timeline-panel {_x000D_
  width: 46%;_x000D_
  float: left;_x000D_
  border: 1px solid #d4d4d4;_x000D_
  border-radius: 2px;_x000D_
  padding: 20px;_x000D_
  position: relative;_x000D_
  -webkit-box-shadow: 0 1px 6px rgba(0, 0, 0, 0.175);_x000D_
  box-shadow: 0 1px 6px rgba(0, 0, 0, 0.175);_x000D_
}_x000D_
_x000D_
.timeline > li > .timeline-panel:before {_x000D_
  position: absolute;_x000D_
  top: 26px;_x000D_
  right: -15px;_x000D_
  display: inline-block;_x000D_
  border-top: 15px solid transparent;_x000D_
  border-left: 15px solid #ccc;_x000D_
  border-right: 0 solid #ccc;_x000D_
  border-bottom: 15px solid transparent;_x000D_
  content: " ";_x000D_
}_x000D_
_x000D_
.timeline > li > .timeline-panel:after {_x000D_
  position: absolute;_x000D_
  top: 27px;_x000D_
  right: -14px;_x000D_
  display: inline-block;_x000D_
  border-top: 14px solid transparent;_x000D_
  border-left: 14px solid #fff;_x000D_
  border-right: 0 solid #fff;_x000D_
  border-bottom: 14px solid transparent;_x000D_
  content: " ";_x000D_
}_x000D_
_x000D_
.timeline > li > .timeline-badge {_x000D_
  color: #fff;_x000D_
  width: 50px;_x000D_
  height: 50px;_x000D_
  line-height: 50px;_x000D_
  font-size: 1.4em;_x000D_
  text-align: center;_x000D_
  position: absolute;_x000D_
  top: 16px;_x000D_
  left: 50%;_x000D_
  margin-left: -25px;_x000D_
  background-color: #999999;_x000D_
  z-index: 100;_x000D_
  border-top-right-radius: 50%;_x000D_
  border-top-left-radius: 50%;_x000D_
  border-bottom-right-radius: 50%;_x000D_
  border-bottom-left-radius: 50%;_x000D_
}_x000D_
_x000D_
.timeline > li.timeline-inverted > .timeline-panel {_x000D_
  float: right;_x000D_
}_x000D_
_x000D_
.timeline > li.timeline-inverted > .timeline-panel:before {_x000D_
  border-left-width: 0;_x000D_
  border-right-width: 15px;_x000D_
  left: -15px;_x000D_
  right: auto;_x000D_
}_x000D_
_x000D_
.timeline > li.timeline-inverted > .timeline-panel:after {_x000D_
  border-left-width: 0;_x000D_
  border-right-width: 14px;_x000D_
  left: -14px;_x000D_
  right: auto;_x000D_
}_x000D_
_x000D_
.timeline-badge.primary {_x000D_
  background-color: #2e6da4 !important;_x000D_
}_x000D_
_x000D_
.timeline-badge.success {_x000D_
  background-color: #3f903f !important;_x000D_
}_x000D_
_x000D_
.timeline-badge.warning {_x000D_
  background-color: #f0ad4e !important;_x000D_
}_x000D_
_x000D_
.timeline-badge.danger {_x000D_
  background-color: #d9534f !important;_x000D_
}_x000D_
_x000D_
.timeline-badge.info {_x000D_
  background-color: #5bc0de !important;_x000D_
}_x000D_
_x000D_
.timeline-title {_x000D_
  margin-top: 0;_x000D_
  color: inherit;_x000D_
}_x000D_
_x000D_
.timeline-body > p,_x000D_
.timeline-body > ul {_x000D_
  margin-bottom: 0;_x000D_
}_x000D_
_x000D_
.timeline-body > p + p {_x000D_
  margin-top: 5px;_x000D_
}

<div class="container">_x000D_
  <div class="page-header">_x000D_
    <h1 id="timeline">Timeline</h1>_x000D_
  </div>_x000D_
  <ul class="timeline">_x000D_
    <li>_x000D_
      <div class="timeline-badge"><i class="glyphicon glyphicon-check"></i></div>_x000D_
      <div class="timeline-panel">_x000D_
         <p><small class="text-muted"><i class="glyphicon glyphicon-time"></i> 11 hours ago via Twitter</small></p>_x000D_
        <div class="timeline-heading">_x000D_
          <h4 class="timeline-title">Mussum ipsum cacilds</h4>_x000D_
          <p><small class="text-muted"><i class="glyphicon glyphicon-time"></i> 11 hours ago via Twitter</small></p>_x000D_
        </div>_x000D_
        <div class="timeline-body">_x000D_
          <p>Mussum ipsum cacilds, vidis litro abertis. Consetis adipiscings elitis. Pra lá , depois divoltis porris, paradis. Paisis, filhis, espiritis santis. Mé faiz elementum girarzis, nisi eros vermeio, in elementis mé pra quem é amistosis quis leo._x000D_
            Manduma pindureta quium dia nois paga. Sapien in monti palavris qui num significa nadis i pareci latim. Interessantiss quisso pudia ce receita de bolis, mais bolis eu num gostis.</p>_x000D_
        </div>_x000D_
      </div>_x000D_
    </li>_x000D_
    <li class="timeline-inverted">_x000D_
      <div class="timeline-badge warning"><i class="glyphicon glyphicon-credit-card"></i></div>_x000D_
      <div class="timeline-panel">_x000D_
        <div class="timeline-heading">_x000D_
          <h4 class="timeline-title">Mussum ipsum cacilds</h4>_x000D_
        </div>_x000D_
        <div class="timeline-body">_x000D_
          <p>Mussum ipsum cacilds, vidis litro abertis. Consetis adipiscings elitis. Pra lá , depois divoltis porris, paradis. Paisis, filhis, espiritis santis. Mé faiz elementum girarzis, nisi eros vermeio, in elementis mé pra quem é amistosis quis leo._x000D_
            Manduma pindureta quium dia nois paga. Sapien in monti palavris qui num significa nadis i pareci latim. Interessantiss quisso pudia ce receita de bolis, mais bolis eu num gostis.</p>_x000D_
          <p>Suco de cevadiss, é um leite divinis, qui tem lupuliz, matis, aguis e fermentis. Interagi no mé, cursus quis, vehicula ac nisi. Aenean vel dui dui. Nullam leo erat, aliquet quis tempus a, posuere ut mi. Ut scelerisque neque et turpis posuere_x000D_
            pulvinar pellentesque nibh ullamcorper. Pharetra in mattis molestie, volutpat elementum justo. Aenean ut ante turpis. Pellentesque laoreet mé vel lectus scelerisque interdum cursus velit auctor. Lorem ipsum dolor sit amet, consectetur adipiscing_x000D_
            elit. Etiam ac mauris lectus, non scelerisque augue. Aenean justo massa.</p>_x000D_
        </div>_x000D_
      </div>_x000D_
    </li>_x000D_
    <li>_x000D_
      <div class="timeline-badge danger"><i class="glyphicon glyphicon-credit-card"></i></div>_x000D_
      <div class="timeline-panel">_x000D_
        <div class="timeline-heading">_x000D_
          <h4 class="timeline-title">Mussum ipsum cacilds</h4>_x000D_
        </div>_x000D_
        <div class="timeline-body">_x000D_
          <p>Mussum ipsum cacilds, vidis litro abertis. Consetis adipiscings elitis. Pra lá , depois divoltis porris, paradis. Paisis, filhis, espiritis santis. Mé faiz elementum girarzis, nisi eros vermeio, in elementis mé pra quem é amistosis quis leo._x000D_
            Manduma pindureta quium dia nois paga. Sapien in monti palavris qui num significa nadis i pareci latim. Interessantiss quisso pudia ce receita de bolis, mais bolis eu num gostis.</p>_x000D_
        </div>_x000D_
      </div>_x000D_
    </li>_x000D_
    <li class="timeline-inverted">_x000D_
      <div class="timeline-panel">_x000D_
        <div class="timeline-heading">_x000D_
          <h4 class="timeline-title">Mussum ipsum cacilds</h4>_x000D_
        </div>_x000D_
        <div class="timeline-body">_x000D_
          <p>Mussum ipsum cacilds, vidis litro abertis. Consetis adipiscings elitis. Pra lá , depois divoltis porris, paradis. Paisis, filhis, espiritis santis. Mé faiz elementum girarzis, nisi eros vermeio, in elementis mé pra quem é amistosis quis leo._x000D_
            Manduma pindureta quium dia nois paga. Sapien in monti palavris qui num significa nadis i pareci latim. Interessantiss quisso pudia ce receita de bolis, mais bolis eu num gostis.</p>_x000D_
        </div>_x000D_
      </div>_x000D_
    </li>_x000D_
    <li>_x000D_
      <div class="timeline-badge info"><i class="glyphicon glyphicon-floppy-disk"></i></div>_x000D_
      <div class="timeline-panel">_x000D_
        <div class="timeline-heading">_x000D_
          <h4 class="timeline-title">Mussum ipsum cacilds</h4>_x000D_
        </div>_x000D_
        <div class="timeline-body">_x000D_
          <p>Mussum ipsum cacilds, vidis litro abertis. Consetis adipiscings elitis. Pra lá , depois divoltis porris, paradis. Paisis, filhis, espiritis santis. Mé faiz elementum girarzis, nisi eros vermeio, in elementis mé pra quem é amistosis quis leo._x000D_
            Manduma pindureta quium dia nois paga. Sapien in monti palavris qui num significa nadis i pareci latim. Interessantiss quisso pudia ce receita de bolis, mais bolis eu num gostis.</p>_x000D_
          <hr>_x000D_
          <div class="btn-group">_x000D_
            <button type="button" class="btn btn-primary btn-sm dropdown-toggle" data-toggle="dropdown">_x000D_
              <i class="glyphicon glyphicon-cog"></i> <span class="caret"></span>_x000D_
            </button>_x000D_
            <ul class="dropdown-menu" role="menu">_x000D_
              <li><a href="#">Action</a></li>_x000D_
              <li><a href="#">Another action</a></li>_x000D_
              <li><a href="#">Something else here</a></li>_x000D_
              <li class="divider"></li>_x000D_
              <li><a href="#">Separated link</a></li>_x000D_
            </ul>_x000D_
          </div>_x000D_
        </div>_x000D_
      </div>_x000D_
    </li>_x000D_
    <li>_x000D_
      <div class="timeline-panel">_x000D_
        <div class="timeline-heading">_x000D_
          <h4 class="timeline-title">Mussum ipsum cacilds</h4>_x000D_
        </div>_x000D_
        <div class="timeline-body">_x000D_
          <p>Mussum ipsum cacilds, vidis litro abertis. Consetis adipiscings elitis. Pra lá , depois divoltis porris, paradis. Paisis, filhis, espiritis santis. Mé faiz elementum girarzis, nisi eros vermeio, in elementis mé pra quem é amistosis quis leo._x000D_
            Manduma pindureta quium dia nois paga. Sapien in monti palavris qui num significa nadis i pareci latim. Interessantiss quisso pudia ce receita de bolis, mais bolis eu num gostis.</p>_x000D_
        </div>_x000D_
      </div>_x000D_
    </li>_x000D_
    <li class="timeline-inverted">_x000D_
      <div class="timeline-badge success"><i class="glyphicon glyphicon-thumbs-up"></i></div>_x000D_
      <div class="timeline-panel">_x000D_
        <div class="timeline-heading">_x000D_
          <h4 class="timeline-title">Mussum ipsum cacilds</h4>_x000D_
        </div>_x000D_
        <div class="timeline-body">_x000D_
          <p>Mussum ipsum cacilds, vidis litro abertis. Consetis adipiscings elitis. Pra lá , depois divoltis porris, paradis. Paisis, filhis, espiritis santis. Mé faiz elementum girarzis, nisi eros vermeio, in elementis mé pra quem é amistosis quis leo._x000D_
            Manduma pindureta quium dia nois paga. Sapien in monti palavris qui num significa nadis i pareci latim. Interessantiss quisso pudia ce receita de bolis, mais bolis eu num gostis.</p>_x000D_
        </div>_x000D_
      </div>_x000D_
    </li>_x000D_
  </ul>_x000D_
</div>

http://codepen.io/bsngr/pen/Ifvbi/

I thought I'd just add that in python 3, filter() is actually an iterator object, so you'd have to pass your filter method call to list() in order to build the filtered list. So in python 2:

lst_a = range(25) #arbitrary list
lst_b = [num for num in lst_a if num % 2 == 0]
lst_c = filter(lambda num: num % 2 == 0, lst_a)

lists b and c have the same values, and were completed in about the same time as filter() was equivalent [x for x in y if z]. However, in 3, this same code would leave list c containing a filter object, not a filtered list. To produce the same values in 3:

lst_a = range(25) #arbitrary list
lst_b = [num for num in lst_a if num % 2 == 0]
lst_c = list(filter(lambda num: num %2 == 0, lst_a))

The problem is that list() takes an iterable as it's argument, and creates a new list from that argument. The result is that using filter in this way in python 3 takes up to twice as long as the [x for x in y if z] method because you have to iterate over the output from filter() as well as the original list.

You have two solutions:

either you downgrade node to V12.10.0 or you can modify this file for every project you will create.

node_modules/metro-config/src/defaults/blacklist.js Change this:

var sharedBlacklist = [
  /node_modules[/\\]react[/\\]dist[/\\].*/,
  /website\/node_modules\/.*/,
  /heapCapture\/bundle\.js/,
  /.*\/__tests__\/.*/
];

to this:

var sharedBlacklist = [
  /node_modules[\/\\]react[\/\\]dist[\/\\].*/,
  /website\/node_modules\/.*/,
  /heapCapture\/bundle\.js/,
  /.*\/__tests__\/.*/
];

Another alternative if you are developing, would be:

DROP SCHEMA public CASCADE;
CREATE SCHEMA public;

RunOnce

RunOnce is an option and have a few keys that can be used for pointing a command to start on startup (depending if it concerns a user or the whole system):

HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Run
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\RunOnce
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\RunOnce

setting the value:

reg add "HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\RunOnce" /v MyBat /D "!C:\mybat.bat"

With setting and exclamation mark at the beginning and if the script exist with a value different than 0 the registry key wont be deleted and the script will be executed every time on startup

SCHTASKS

You can use SCHTASKS and a triggering event:

SCHTASKS /Create /SC ONEVENT /MO ONLOGON /TN ON_LOGON /tr "c:\some.bat" 

or

SCHTASKS /Create /SC ONEVENT /MO ONSTART/TN ON_START /tr "c:\some.bat"

Startup Folder

You also have two startup folders - one for the current user and one global. There you can copy your scripts (or shortcuts) in order to start a file on startup

::the global one
C:\ProgramData\Microsoft\Windows\Start Menu\Programs\StartUp
::for the current user
%USERPROFILE%\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup

It's quite easy with an API that maps IP address to location. Run the snippet to get city & country for the IP in the input box.

$('.send').on('click', function(){_x000D_
_x000D_
  $.getJSON('https://ipapi.co/'+$('.ip').val()+'/json', function(data){_x000D_
      $('.city').text(data.city);_x000D_
      $('.country').text(data.country);_x000D_
  });_x000D_
});

<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>_x000D_
_x000D_
<input class="ip" value="8.8.8.8">_x000D_
<button class="send">Go</button>_x000D_
<br><br>_x000D_
<span class="city"></span>, _x000D_
<span class="country"></span>

public void keyPressed(KeyEvent e) {
    int keyCode = e.getKeyCode();
    switch( keyCode ) { 
        case KeyEvent.VK_UP:
            // handle up 
            break;
        case KeyEvent.VK_DOWN:
            // handle down 
            break;
        case KeyEvent.VK_LEFT:
            // handle left
            break;
        case KeyEvent.VK_RIGHT :
            // handle right
            break;
     }
} 

Using ngClass to disabled the button for invalid form is not good practice in Angular2 when its providing inbuilt features to enable and disable the button if form is valid and invalid respectively without doing any extra efforts/logic.

[disabled] will do all thing like if form is valid then it will be enabled and if form is invalid then it will be disabled automatically.

See Example:

<form (ngSubmit)="f.form.valid" #f="ngForm" novalidate>
<input type="text" placeholder="Name" [(ngModel)]="txtName" name="txtname" #textname="ngModel" required>
<input type="button" class="mdl-button" [disabled]="!f.form.valid" (click)="onSave()" name="">

You can use a UITextView and select Detection for Links, Phone Numbers and other things in the inspector.

def get_line_number(phrase, file_name):
    with open(file_name) as f:
        for i, line in enumerate(f, 1):
            if phrase in line:
                return i

@echo off
color 0B
echo =============================================================================
echo.
echo              ClockworkMod Recovery for SAMSUNG GALAXY SIII E210L
echo.
echo                  ClockworkMod Recovery (v6.0.1.2 Touch)
echo.
echo     ¡ô¨T¨T¨T¨T¨T¨T¨T¨T¨T¨T¨T¨T¨T¨T¨T¨T¨T¨T¨T¨T¨T¨T¨T¨T¨T¨T¨T¨T¨T¨T¨T¨T¨T¡ô
echo     ¨U                                                                  ¨U
echo     ¨U SAMSUNG GALAXY SIII E210L                                        ¨U
echo     ¡ô¨T¨T¨T¨T¨T¨T¨T¨T¨T¨T¨T¨T¨T¨T¨T¨T¨T¨T¨T¨T¨T¨T¨T¨T¨T¨T¨T¨T¨T¨T¨T¨T¨T¡ô
echo.
echo  1) (Settings\Developer options©¥ USB debugging)
echo.
echo  2) CWM SAMSUNG GALAXY SIII E210L 
echo.
echo  3) THANK!!!!!!
echo.
echo =============================================================================
echo                           ARE YOU READY? GO! ¡·¡·¡·
@pause
echo.
echo adb...
adb.exe kill-server
adb.exe wait-for-device
echo wiat¸!
echo.
echo conect...
adb.exe push IMG /data/local/tmp/
adb.exe shell su -c "dd if=/data/local/tmp/GANGSTAR-VEGAS-1.3.0-APK-Andropalace.net.apk of=/mnt/sdcard/Android/GANGSTAR-VEGAS-1.3.0-APK-Andropalace.net.apk
adb.exe shell su -c "rm /data/local/tmp/bootloader.img"
adb.exe shell su -c "rm /data/local/tmp/recovery.img"


echo ===============================================================
echo     ClockworkMod Recovery!
echo.
@pause

Sam's solution should be sufficient. I've used combination of both histogram difference and template matching because not one method was working for me 100% of the times. I've given less importance to histogram method though. Here's how I've implemented in simple python script.

import cv2

class CompareImage(object):

    def __init__(self, image_1_path, image_2_path):
        self.minimum_commutative_image_diff = 1
        self.image_1_path = image_1_path
        self.image_2_path = image_2_path

    def compare_image(self):
        image_1 = cv2.imread(self.image_1_path, 0)
        image_2 = cv2.imread(self.image_2_path, 0)
        commutative_image_diff = self.get_image_difference(image_1, image_2)

        if commutative_image_diff < self.minimum_commutative_image_diff:
            print "Matched"
            return commutative_image_diff
        return 10000 //random failure value

    @staticmethod
    def get_image_difference(image_1, image_2):
        first_image_hist = cv2.calcHist([image_1], [0], None, [256], [0, 256])
        second_image_hist = cv2.calcHist([image_2], [0], None, [256], [0, 256])

        img_hist_diff = cv2.compareHist(first_image_hist, second_image_hist, cv2.HISTCMP_BHATTACHARYYA)
        img_template_probability_match = cv2.matchTemplate(first_image_hist, second_image_hist, cv2.TM_CCOEFF_NORMED)[0][0]
        img_template_diff = 1 - img_template_probability_match

        # taking only 10% of histogram diff, since it's less accurate than template method
        commutative_image_diff = (img_hist_diff / 10) + img_template_diff
        return commutative_image_diff


    if __name__ == '__main__':
        compare_image = CompareImage('image1/path', 'image2/path')
        image_difference = compare_image.compare_image()
        print image_difference

Open app/build.gradle file

Change buildToolsVersion to buildToolsVersion "26.0.2"

change compile 'com.android.support:appcompat to compile 'com.android.support:appcompat-v7:26.0.2'

The accepted answer doesn't cut it because if a user de-selects a row the list is not updated accordingly.

Here is what I suggest instead:

Private Sub CommandButton2_Click()
    Dim lItem As Long

    For lItem = 0 To ListBox1.ListCount - 1
        If ListBox1.Selected(lItem) = True Then
            MsgBox(ListBox1.List(lItem))
        End If
    Next
End Sub

Courtesy of http://www.ozgrid.com/VBA/multi-select-listbox.htm

I just want to explain it in my own way with a small story that I experienced in one of my projects. First I want to explain Why DAO is important? rather than go to What is DAO? for better understanding.

Why DAO is important?
In my one project of my project, I used Client.class which contains all the basic information of our system users. Where I need client then every time I need to do an ugly query where it is needed. Then I felt that decreases the readability and made a lot of redundant boilerplate code.

Then one of my senior developers introduced a QueryUtils.class where all queries are added using public static access modifier and then I don't need to do query everywhere. Suppose when I needed activated clients then I just call -

QueryUtils.findAllActivatedClients();

In this way, I made some optimizations of my code.

But there was another problem !!!

I felt that the QueryUtils.class was growing very highly. 100+ methods were included in that class which was also very cumbersome to read and use. Because this class contains other queries of another domain models ( For example- products, categories locations, etc ).

Then the superhero Mr. CTO introduced a new solution named DAO which solved the problem finally. I felt DAO is very domain-specific. For example, he created a DAO called ClientDAO.class where all Client.class related queries are found which seems very easy for me to use and maintain. The giant QueryUtils.class was broken down into many other domain-specific DAO for example - ProductsDAO.class, CategoriesDAO.class, etc which made the code more Readable, more Maintainable, more Decoupled.

What is DAO?

It is an object or interface, which made an easy way to access data from the database without writing complex and ugly queries every time in a reusable way.

Added streaming support based on the answer of @dunes:

import re
from json import JSONDecoder, JSONDecodeError

NOT_WHITESPACE = re.compile(r"[^\s]")


def stream_json(file_obj, buf_size=1024, decoder=JSONDecoder()):
    buf = ""
    ex = None
    while True:
        block = file_obj.read(buf_size)
        if not block:
            break
        buf += block
        pos = 0
        while True:
            match = NOT_WHITESPACE.search(buf, pos)
            if not match:
                break
            pos = match.start()
            try:
                obj, pos = decoder.raw_decode(buf, pos)
            except JSONDecodeError as e:
                ex = e
                break
            else:
                ex = None
                yield obj
        buf = buf[pos:]
    if ex is not None:
        raise ex

Just remove

 <authorization>
      <deny users="?"/>
    </authorization>

from your web.config file

that did for me

You can use date.js to achieve this:

var date = new Date('2014-01-06');
var newDate = date.toString('dd-MM-yy');

Alternatively, you can do it natively like this:

var dateAr = '2014-01-06'.split('-');_x000D_
var newDate = dateAr[1] + '-' + dateAr[2] + '-' + dateAr[0].slice(-2);_x000D_
_x000D_
console.log(newDate);

For Windows only

To completely disable automatic Chrome updates create/edit the following registry keys/dwords under HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Google\Update:

• Dword: AutoUpdateCheckPeriodMinutes Value: 0
• Dword: DisableAutoUpdateChecksCheckboxValue Value: 1
• Dword: UpdateDefault Value: 0
• Dword: Update{8A69D345-D564-463C-AFF1-A69D9E530F96} Value: 0

This last one was the money for me. Until I added it updates were enabled in chrome://chrome.

Note: On 64-bit machines running 32-bit Chrome you may need to put the dwords under the following key instead: HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Policies\Google\Update.

I created a GitHub gist powershell script to create the dwords under both Policies and Wow6432Node\Policies.

It was discussed before here.

In computer programming, a callback is a piece of executable code that is passed as an argument to other code, which is expected to call back (execute) the argument at some convenient time. The invocation may be immediate as in a synchronous callback or it might happen at later time, as in an asynchronous callback.

Don't use quotes with <<EOF:

var=$1
sudo tee "/path/to/outfile" > /dev/null <<EOF
Some text that contains my $var
EOF

Variable expansion is the default behavior inside of here-docs. You disable that behavior by quoting the label (with single or double quotes).

This happens due to caching.

When you run, php artisan config:cache, it will cache the configuration files. Whenever things get change, you need to keep running it to update the cache files. But, it won't cache if you never run that command.

This is OK for production, since config don't change that often. But during staging or dev, you can just disable caching by clearing the cache and don't run the cache command

So, just run php artisan config:clear, and don't run the command previously to avoid caching.

Check original post

Password authentication failed error on running laravel migration

My mongod.cfg file had the following last two lines:

#snmp:
mp:

I have no idea why there's an mp: in there. But when I manually executed the image path

C:\mongodb\bin\mongod.exe --config "C:\mongodb\bin\mongod.cfg" --service

at

Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MongoDB

I got

c:\mongodb\bin>mongod /?C:\mongodb\bin\mongod.exe --config "C:\mongodb\bin\mongod.cfg" --service
Unrecognized option: mp
try 'mongod --help' for more information

So I commented it out and then the service started without any problem.

Building on tkerwin's answer, if you happen to have nested parentheses like in

st = "sum((a+b)/(c+d))"

his answer will not work if you need to take everything between the first opening parenthesis and the last closing parenthesis to get (a+b)/(c+d), because find searches from the left of the string, and would stop at the first closing parenthesis.

To fix that, you need to use rfind for the second part of the operation, so it would become

st[st.find("(")+1:st.rfind(")")]

Many of the answers seem to me to be ignoring the stated requirements:

• The result should be a byte array
• It should be as efficient as possible

These two together rule out a LINQ sequence of bytes - anything with yield is going to make it impossible to get the final size without iterating through the whole sequence.

If those aren't the real requirements of course, LINQ could be a perfectly good solution (or the IList<T> implementation). However, I'll assume that Superdumbell knows what he wants.

(EDIT: I've just had another thought. There's a big semantic difference between making a copy of the arrays and reading them lazily. Consider what happens if you change the data in one of the "source" arrays after calling the Combine (or whatever) method but before using the result - with lazy evaluation, that change will be visible. With an immediate copy, it won't. Different situations will call for different behaviour - just something to be aware of.)

Here are my proposed methods - which are very similar to those contained in some of the other answers, certainly :)

public static byte[] Combine(byte[] first, byte[] second)
{
    byte[] ret = new byte[first.Length + second.Length];
    Buffer.BlockCopy(first, 0, ret, 0, first.Length);
    Buffer.BlockCopy(second, 0, ret, first.Length, second.Length);
    return ret;
}

public static byte[] Combine(byte[] first, byte[] second, byte[] third)
{
    byte[] ret = new byte[first.Length + second.Length + third.Length];
    Buffer.BlockCopy(first, 0, ret, 0, first.Length);
    Buffer.BlockCopy(second, 0, ret, first.Length, second.Length);
    Buffer.BlockCopy(third, 0, ret, first.Length + second.Length,
                     third.Length);
    return ret;
}

public static byte[] Combine(params byte[][] arrays)
{
    byte[] ret = new byte[arrays.Sum(x => x.Length)];
    int offset = 0;
    foreach (byte[] data in arrays)
    {
        Buffer.BlockCopy(data, 0, ret, offset, data.Length);
        offset += data.Length;
    }
    return ret;
}

Of course the "params" version requires creating an array of the byte arrays first, which introduces extra inefficiency.

I do exactly what you suggest (return a String).

You might consider setting the MIME type to indicate you're returning JSON, though (according to this other stackoverflow post it's "application/json").

Starting file:

     line 1
   line 2
line 3  
      line 4 

Code:

with open("filename.txt", "r") as f:
    lines = f.readlines()
    for line in lines:
        stripped = line.strip()
        print(stripped)

Output:

line 1
line 2
line 3
line 4

In theory SMTP can be handled by either TCP, UDP, or some 3rd party protocol.

As defined in RFC 821, RFC 2821, and RFC 5321:

SMTP is independent of the particular transmission subsystem and requires only a reliable ordered data stream channel.

In addition, the Internet Assigned Numbers Authority has allocated port 25 for both TCP and UDP for use by SMTP.

In practice however, most if not all organizations and applications only choose to implement the TCP protocol. For example, in Microsoft's port listing port 25 is only listed for TCP and not UDP.

The big difference between TCP and UDP that makes TCP ideal here is that TCP checks to make sure that every packet is received and re-sends them if they are not whereas UDP will simply send packets and not check for receipt. This makes UDP ideal for things like streaming video where every single packet isn't as important as keeping a continuous flow of packets from the server to the client.

Considering SMTP, it makes more sense to use TCP over UDP. SMTP is a mail transport protocol, and in mail every single packet is important. If you lose several packets in the middle of the message the recipient might not even receive the message and if they do they might be missing key information. This makes TCP more appropriate because it ensures that every packet is delivered.

Run in background and add logs to log file using the following:

nohup java -jar /web/server.jar > log.log 2>&1 &

This is an old post but for anyone wanting to use variables as @centurian said the single quotes mean nothing will be expanded.

A simple way to get variables in is to do string concatenation since this is done by juxtaposition in bash the following should work:

sed -i -e "s/$var1/$var2/g" /tmp/file.txt

The lean option tells Mongoose to skip hydrating the result documents. This makes queries faster and less memory intensive, but the result documents are plain old JavaScript objects (POJOs), not Mongoose documents.

const leanDoc = await MyModel.findOne().lean();

not necessary to use JSON.parse() method

Python 2:

>>> theArray = [['a','b','c'],['d','e','f'],['g','h','i']]
>>> zip(*theArray)
[('a', 'd', 'g'), ('b', 'e', 'h'), ('c', 'f', 'i')]

Python 3:

>>> [*zip(*theArray)]
[('a', 'd', 'g'), ('b', 'e', 'h'), ('c', 'f', 'i')]

pout can pretty print anything you throw at it, for example (borrowing data from another answer):

data = {'a':2, 'b':{'x':3, 'y':{'t1': 4, 't2':5}}}
pout.vs(data)

would result in output printed to the screen like:

{
    'a': 2,
    'b':
    {
        'y':
        {
            't2': 5,
            't1': 4
        },
        'x': 3
    }
}

or you can return the formatted string output of your object:

v = pout.s(data)

Its primary use case is for debugging so it doesn't choke on object instances or anything and it handles unicode output as you would expect, works in python 2.7 and 3.

disclosure: I'm the author and maintainer of pout.

<script>
$(document).ready(function(){
      $('button').attr('class','btn btn-primary');
}); </script>

Use a function style conversion (found in section labeled "Integer and Floating-Point Conversion" from "The Swift Programming Language."[iTunes link])

  1> Int(3.4)
$R1: Int = 3

Use a "Here-String" and cast to XML.

[xml]$myxml = @"
<stuff>
 <item name="Joe" age="32">
  <info>something about him</info>
 </item>
 <item name="Sue" age="29">
  <info>something about her</info>
 </item>
 <item name="Cat" age="12">
  <info>something else</info>
 </item>
</stuff>
"@

[array]$myitems = $myxml.stuff.Item

$myitems

Best way is use DateTime object to convert your date.

$myDateTime = DateTime::createFromFormat('Y-m-d', $weddingdate);
$formattedweddingdate = $myDateTime->format('d-m-Y');

Note: It will support for PHP 5 >= 5.3.0 only.

Go To: File --> Setting --> Build, Execution, Deployment --> Gradle, then tick the use local Gradle distribution, then set Gradle home by giving path to Gradle. Tick offline work.

Like so:

I insert this code in my tag and it works correctly:

ng-show="!Contract.BuyerName.trim()" >

Existing Solution

There could be 3 solution from this posting and other answer.

Solution 1

    var lastScrollTop = 0;
    $(window).on('scroll', function() {
        st = $(this).scrollTop();
        if(st < lastScrollTop) {
            console.log('up 1');
        }
        else {
            console.log('down 1');
        }
        lastScrollTop = st;
    });

Solution 2

    $('body').on('DOMMouseScroll', function(e){
        if(e.originalEvent.detail < 0) {
            console.log('up 2');
        }
        else {
            console.log('down 2');
        }
    });

Solution 3

    $('body').on('mousewheel', function(e){
        if(e.originalEvent.wheelDelta > 0) {
            console.log('up 3');
        }
        else {
            console.log('down 3');
        }
    });

Multi Browser Test

I couldn't tested it on Safari

chrome 42 (Win 7)

• Solution 1
  • Up : 1 event per 1 scroll
  • Down : 1 event per 1 scroll
• Solution 2
  • Up : Not working
  • Down : Not working
• Solution 3
  • Up : 1 event per 1 scroll
  • Down : 1 event per 1 scroll

Firefox 37 (Win 7)

• Solution 1
  • Up : 20 events per 1 scroll
  • Down : 20 events per 1 scroll
• Solution 2
  • Up : Not working
  • Down : 1 event per 1 scroll
• Solution 3
  • Up : Not working
  • Down : Not working

IE 11 (Win 8)

• Solution 1
  • Up : 10 events per 1 scroll (side effect : down scroll occured at last)
  • Down : 10 events per 1 scroll
• Solution 2
  • Up : Not working
  • Down : Not working
• Solution 3
  • Up : Not working
  • Down : 1 event per 1 scroll

IE 10 (Win 7)

• Solution 1
  • Up : 1 event per 1 scroll
  • Down : 1 event per 1 scroll
• Solution 2
  • Up : Not working
  • Down : Not working
• Solution 3
  • Up : 1 event per 1 scroll
  • Down : 1 event per 1 scroll

IE 9 (Win 7)

• Solution 1
  • Up : 1 event per 1 scroll
  • Down : 1 event per 1 scroll
• Solution 2
  • Up : Not working
  • Down : Not working
• Solution 3
  • Up : 1 event per 1 scroll
  • Down : 1 event per 1 scroll

IE 8 (Win 7)

• Solution 1
  • Up : 2 events per 1 scroll (side effect : down scroll occured at last)
  • Down : 2~4 events per 1 scroll
• Solution 2
  • Up : Not working
  • Down : Not working
• Solution 3
  • Up : 1 event per 1 scroll
  • Down : 1 event per 1 scroll

Combined Solution

I checked that side effect from IE 11 and IE 8 is come from if else statement. So, I replaced it with if else if statement as following.

From the multi browser test, I decided to use Solution 3 for common browsers and Solution 1 for firefox and IE 11.

I referred this answer to detect IE 11.

    // Detect IE version
    var iev=0;
    var ieold = (/MSIE (\d+\.\d+);/.test(navigator.userAgent));
    var trident = !!navigator.userAgent.match(/Trident\/7.0/);
    var rv=navigator.userAgent.indexOf("rv:11.0");

    if (ieold) iev=new Number(RegExp.$1);
    if (navigator.appVersion.indexOf("MSIE 10") != -1) iev=10;
    if (trident&&rv!=-1) iev=11;

    // Firefox or IE 11
    if(typeof InstallTrigger !== 'undefined' || iev == 11) {
        var lastScrollTop = 0;
        $(window).on('scroll', function() {
            st = $(this).scrollTop();
            if(st < lastScrollTop) {
                console.log('Up');
            }
            else if(st > lastScrollTop) {
                console.log('Down');
            }
            lastScrollTop = st;
        });
    }
    // Other browsers
    else {
        $('body').on('mousewheel', function(e){
            if(e.originalEvent.wheelDelta > 0) {
                console.log('Up');
            }
            else if(e.originalEvent.wheelDelta < 0) {
                console.log('Down');
            }
        });
    }

A lot of people here are suggesting to use the triangles, but sometimes you need a chevron.

We had a case where our button shows a chevron, and wanted the user's manual to refer to the button in a way which will be recognized by a non-technical user too. So we needed a chevron sign.

We used ? in the end. It is known as PRESENTATION FORM FOR VERTICAL RIGHT ANGLE BRACKET and its code is U+FE40.

Lock makes programmers' life easier. Here are a few situations that can be achieved easily with lock.

1. Lock in one method, and release the lock in another method.
2. If You have two threads working on two different pieces of code, however, in the first thread has a pre-requisite on a certain piece of code in the second thread (while some other threads also working on the same piece of code in the second thread simultaneously). A shared lock can solve this problem quite easily.
3. Implementing monitors. For example, a simple queue where the put and get methods are executed from many other threads. However, you do not want multiple put (or get) methods running simultaneously, neither the put and get method running simultaneously. A private lock makes your life a lot easier to achieve this.

While, the lock, and conditions build on the synchronized mechanism. Therefore, can certainly be able to achieve the same functionality that you can achieve using the lock. However, solving complex scenarios with synchronized may make your life difficult and can deviate you from solving the actual problem.

Fortran (designed for scientific computing) has a built-in power operator, and as far as I know Fortran compilers will commonly optimize raising to integer powers in a similar fashion to what you describe. C/C++ unfortunately don't have a power operator, only the library function pow(). This doesn't prevent smart compilers from treating pow specially and computing it in a faster way for special cases, but it seems they do it less commonly ...

Some years ago I was trying to make it more convenient to calculate integer powers in an optimal way, and came up with the following. It's C++, not C though, and still depends on the compiler being somewhat smart about how to optimize/inline things. Anyway, hope you might find it useful in practice:

template<unsigned N> struct power_impl;

template<unsigned N> struct power_impl {
    template<typename T>
    static T calc(const T &x) {
        if (N%2 == 0)
            return power_impl<N/2>::calc(x*x);
        else if (N%3 == 0)
            return power_impl<N/3>::calc(x*x*x);
        return power_impl<N-1>::calc(x)*x;
    }
};

template<> struct power_impl<0> {
    template<typename T>
    static T calc(const T &) { return 1; }
};

template<unsigned N, typename T>
inline T power(const T &x) {
    return power_impl<N>::calc(x);
}

_{Clarification for the curious: this does not find the optimal way to compute powers, but since finding the optimal solution is an NP-complete problem and this is only worth doing for small powers anyway (as opposed to using pow), there's no reason to fuss with the detail.}

Then just use it as power<6>(a).

This makes it easy to type powers (no need to spell out 6 as with parens), and lets you have this kind of optimization without -ffast-math in case you have something precision dependent such as compensated summation (an example where the order of operations is essential).

You can probably also forget that this is C++ and just use it in the C program (if it compiles with a C++ compiler).

Hope this can be useful.

EDIT:

This is what I get from my compiler:

For a*a*a*a*a*a,

    movapd  %xmm1, %xmm0
    mulsd   %xmm1, %xmm0
    mulsd   %xmm1, %xmm0
    mulsd   %xmm1, %xmm0
    mulsd   %xmm1, %xmm0
    mulsd   %xmm1, %xmm0

For (a*a*a)*(a*a*a),

    movapd  %xmm1, %xmm0
    mulsd   %xmm1, %xmm0
    mulsd   %xmm1, %xmm0
    mulsd   %xmm0, %xmm0

For power<6>(a),

    mulsd   %xmm0, %xmm0
    movapd  %xmm0, %xmm1
    mulsd   %xmm0, %xmm1
    mulsd   %xmm0, %xmm1

I have made django-templated-email in an effort to solve this problem, inspired by this solution (and the need to, at some point, switch from using django templates to using a mailchimp etc. set of templates for transactional, templated emails for my own project). It is still a work-in-progress though, but for the example above, you would do:

from templated_email import send_templated_mail
send_templated_mail(
        'email',
        '[email protected]',
        ['[email protected]'],
        { 'username':username }
    )

With the addition of the following to settings.py (to complete the example):

TEMPLATED_EMAIL_DJANGO_SUBJECTS = {'email':'hello',}

This will automatically look for templates named 'templated_email/email.txt' and 'templated_email/email.html' for the plain and html parts respectively, in the normal django template dirs/loaders (complaining if it cannot find at least one of those).

You should be able to do the count on the purch variable:

purch.Count();

e.g.

var purch = from purchase in myBlaContext.purchases
select purchase;

purch.Count();

I ended up with a combination of Roberts and chirags answers:

((EditText)findViewById(R.id.search_field)).setOnEditorActionListener(
        new EditText.OnEditorActionListener() {
    @Override
    public boolean onEditorAction(TextView v, int actionId, KeyEvent event) {
        // Identifier of the action. This will be either the identifier you supplied,
        // or EditorInfo.IME_NULL if being called due to the enter key being pressed.
        if (actionId == EditorInfo.IME_ACTION_SEARCH
                || actionId == EditorInfo.IME_ACTION_DONE
                || event.getAction() == KeyEvent.ACTION_DOWN
                && event.getKeyCode() == KeyEvent.KEYCODE_ENTER) {
            onSearchAction(v);
            return true;
        }
        // Return true if you have consumed the action, else false.
        return false;
    }
});

Update: The above code would some times activate the callback twice. Instead I've opted for the following code, which I got from the Google chat clients:

public boolean onEditorAction(TextView v, int actionId, KeyEvent event) {
    // If triggered by an enter key, this is the event; otherwise, this is null.
    if (event != null) {
        // if shift key is down, then we want to insert the '\n' char in the TextView;
        // otherwise, the default action is to send the message.
        if (!event.isShiftPressed()) {
            if (isPreparedForSending()) {
                confirmSendMessageIfNeeded();
            }
            return true;
        }
        return false;
    }

    if (isPreparedForSending()) {
        confirmSendMessageIfNeeded();
    }
    return true;
}

TooTallNate has a simple client side https://github.com/TooTallNate/Java-WebSocket

Just add the java_websocket.jar in the dist folder into your project.

 import org.java_websocket.client.WebSocketClient;
 import org.java_websocket.drafts.Draft_10;
 import org.java_websocket.handshake.ServerHandshake;
 import org.json.JSONException;
 import org.json.JSONObject;

  WebSocketClient mWs = new WebSocketClient( new URI( "ws://socket.example.com:1234" ), new Draft_10() )
{
                    @Override
                    public void onMessage( String message ) {
                     JSONObject obj = new JSONObject(message);
                     String channel = obj.getString("channel");
                    }

                    @Override
                    public void onOpen( ServerHandshake handshake ) {
                        System.out.println( "opened connection" );
                    }

                    @Override
                    public void onClose( int code, String reason, boolean remote ) {
                        System.out.println( "closed connection" );
                    }

                    @Override
                    public void onError( Exception ex ) {
                        ex.printStackTrace();
                    }

                };
 //open websocket
 mWs.connect();
 JSONObject obj = new JSONObject();
 obj.put("event", "addChannel");
 obj.put("channel", "ok_btccny_ticker");
 String message = obj.toString();
 //send message
 mWs.send(message);

// and to close websocket

 mWs.close();

Here is a simple example that I tried to explain.

<div>
    <div *ngIf="product">     <!--If "product" exists-->
      <h2>Product Details</h2><hr>
      <h4>Name: {{ product.name }}</h4>
      <h5>Price: {{ product.price | currency }}</h5>
      <p> Description: {{ product.description }}</p>
    </div>

    <div *ngIf="!product">     <!--If "product" not exists-->
       *Product not found
    </div>
</div>

org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'MyController'

Make sure that you have added ojdbc14.jar into your library.

For oracle 11g, usie ojdbc6.jar.

Position : sticky doesn't work for some elements like (thead) in chrome and other webkit browsers like safari.

But it works fine with (th)

body {_x000D_
  background-color: rgba(0, 255, 200, 0.1);_x000D_
}_x000D_
_x000D_
.intro {_x000D_
  color: rgb(228, 23, 23);_x000D_
}_x000D_
_x000D_
.wrapper {_x000D_
  overflow-y: scroll;_x000D_
  height: 300px;_x000D_
}_x000D_
_x000D_
.sticky {_x000D_
  position: sticky;_x000D_
  top: 0;_x000D_
  color: black;_x000D_
  background-color: white;_x000D_
}

<div class="container intro">_x000D_
  <h1>Sticky Table Header</h1>_x000D_
  <p>Postion : sticky doesn't work for some elements like (thead) in chrome and other webkit browsers like safari. </p>_x000D_
  <p>But it works fine with (th)</p>_x000D_
</div>_x000D_
<div class="container wrapper">_x000D_
  <table class="table table-striped">_x000D_
    <thead>_x000D_
      <tr>_x000D_
        <th class="sticky">Firstname</th>_x000D_
        <th class="sticky">Lastname</th>_x000D_
        <th class="sticky">Email</th>_x000D_
      </tr>_x000D_
    </thead>_x000D_
    <tbody>_x000D_
      <tr>_x000D_
        <td>James</td>_x000D_
        <td>Vince</td>_x000D_
        <td>[email protected]</td>_x000D_
      </tr>_x000D_
      <tr>_x000D_
        <td>Jonny</td>_x000D_
        <td>Bairstow</td>_x000D_
        <td>[email protected]</td>_x000D_
      </tr>_x000D_
      <tr>_x000D_
        <td>James</td>_x000D_
        <td>Anderson</td>_x000D_
        <td>[email protected]</td>_x000D_
      </tr>_x000D_
      <tr>_x000D_
        <td>Stuart</td>_x000D_
        <td>Broad</td>_x000D_
        <td>[email protected]</td>_x000D_
      </tr>_x000D_
      <tr>_x000D_
        <td>Eoin</td>_x000D_
        <td>Morgan</td>_x000D_
        <td>[email protected]</td>_x000D_
      </tr>_x000D_
      <tr>_x000D_
        <td>Joe</td>_x000D_
        <td>Root</td>_x000D_
        <td>[email protected]</td>_x000D_
      </tr>_x000D_
      <tr>_x000D_
        <td>Chris</td>_x000D_
        <td>Woakes</td>_x000D_
        <td>[email protected]</td>_x000D_
      </tr>_x000D_
      <tr>_x000D_
        <td>Liam</td>_x000D_
        <td>PLunkett</td>_x000D_
        <td>[email protected]</td>_x000D_
      </tr>_x000D_
      <tr>_x000D_
        <td>Jason</td>_x000D_
        <td>Roy</td>_x000D_
        <td>[email protected]</td>_x000D_
      </tr>_x000D_
      <tr>_x000D_
        <td>Alex</td>_x000D_
        <td>Hales</td>_x000D_
        <td>[email protected]</td>_x000D_
      </tr>_x000D_
      <tr>_x000D_
        <td>Jos</td>_x000D_
        <td>Buttler</td>_x000D_
        <td>[email protected]</td>_x000D_
      </tr>_x000D_
      <tr>_x000D_
        <td>Ben</td>_x000D_
        <td>Stokes</td>_x000D_
        <td>[email protected]</td>_x000D_
      </tr>_x000D_
      <tr>_x000D_
        <td>Jofra</td>_x000D_
        <td>Archer</td>_x000D_
        <td>[email protected]</td>_x000D_
      </tr>_x000D_
      <tr>_x000D_
        <td>Mitchell</td>_x000D_
        <td>Starc</td>_x000D_
        <td>[email protected]</td>_x000D_
      </tr>_x000D_
      <tr>_x000D_
        <td>Aaron</td>_x000D_
        <td>Finch</td>_x000D_
        <td>[email protected]</td>_x000D_
      </tr>_x000D_
      <tr>_x000D_
        <td>David</td>_x000D_
        <td>Warner</td>_x000D_
        <td>[email protected]</td>_x000D_
      </tr>_x000D_
      <tr>_x000D_
        <td>Steve</td>_x000D_
        <td>Smith</td>_x000D_
        <td>[email protected]</td>_x000D_
      </tr>_x000D_
      <tr>_x000D_
        <td>Glenn</td>_x000D_
        <td>Maxwell</td>_x000D_
        <td>[email protected]</td>_x000D_
      </tr>_x000D_
      <tr>_x000D_
        <td>Marcus</td>_x000D_
        <td>Stoinis</td>_x000D_
        <td>[email protected]</td>_x000D_
      </tr>_x000D_
      <tr>_x000D_
        <td>Alex</td>_x000D_
        <td>Carey</td>_x000D_
        <td>[email protected]</td>_x000D_
      </tr>_x000D_
      <tr>_x000D_
        <td>Nathan</td>_x000D_
        <td>Coulter Nile</td>_x000D_
        <td>[email protected]</td>_x000D_
      </tr>_x000D_
      <tr>_x000D_
        <td>Pat</td>_x000D_
        <td>Cummins</td>_x000D_
        <td>[email protected]</td>_x000D_
      </tr>_x000D_
      <tr>_x000D_
        <td>Adam</td>_x000D_
        <td>Zampa</td>_x000D_
        <td>[email protected]</td>_x000D_
      </tr>_x000D_
    </tbody>_x000D_
  </table>_x000D_
</div>

Or visit my codepen example :

In my opinion the top answers are not readable/maintainable, and the other answers do not properly bind context. Here's a readable solution using ES6 syntax to solve both these problems.

const orginial = someObject.foo;
someObject.foo = function() {
  if (condition) orginial.bind(this)(...arguments);
};

Try DLRadioButton, works for both Swift and ObjC. You can also use images to indicate selection status or customize your own style.

Check it out at GitHub.

**Update: added the option for putting selection indicator on the right side.

**Update: added square button, IBDesignable, improved performance.

**Update: added multiple selection support.

Please follow below step to do some processing after Application Context get loaded i.e application is ready to serve.

1. Create below annotation i.e

   @Retention(RetentionPolicy.RUNTIME) @Target(value= {ElementType.METHOD, ElementType.TYPE}) public @interface AfterApplicationReady {}

2.Create Below Class which is a listener which get call on application ready state.

    @Component
    public class PostApplicationReadyListener implements ApplicationListener<ApplicationReadyEvent> {

    public static final Logger LOGGER = LoggerFactory.getLogger(PostApplicationReadyListener.class);
    public static final String MODULE = PostApplicationReadyListener.class.getSimpleName();

    @Override
    public void onApplicationEvent(ApplicationReadyEvent event) {
        try {
            ApplicationContext context = event.getApplicationContext();
            String[] beans = context.getBeanNamesForAnnotation(AfterAppStarted.class);

            LOGGER.info("bean found with AfterAppStarted annotation are : {}", Arrays.toString(beans));

            for (String beanName : beans) {
                Object bean = context.getBean(beanName);
                Class<?> targetClass = AopUtils.getTargetClass(bean);
                Method[] methods = targetClass.getMethods();
                for (Method method : methods) {
                    if (method.isAnnotationPresent(AfterAppStartedComplete.class)) {

                        LOGGER.info("Method:[{} of Bean:{}] found with AfterAppStartedComplete Annotation.", method.getName(), beanName);

                        Method currentMethod = bean.getClass().getMethod(method.getName(), method.getParameterTypes());

                        LOGGER.info("Going to invoke method:{} of bean:{}", method.getName(), beanName);

                        currentMethod.invoke(bean);

                        LOGGER.info("Invocation compeleted method:{} of bean:{}", method.getName(), beanName);
                    }
                }
            }
        } catch (Exception e) {
            LOGGER.warn("Exception occured : ", e);
        }
    }
}

Finally when you start your Spring application just before log stating application started your listener will be called.

First, disable the php5 module:

a2dismod php5

then, enable the php7 module:

a2enmod php7.0

Next, reload/restart the Apache service:

service apache2 restart

Update 2018-09-04

wrt the comment, you need to specify exact installed php-7.x version.

The closest to Eclipse will be Ctrl+Button2 Click (Scroll click)

It's called Quick Doc in IntelliJ, I wish guys from JetBrains one day add quick doc like Eclipse with Ctrl+Mouse Move it's so much better.

In my case only with only mouse move is a bit annoying, so if you search in Preferences/Settings --> Keymap for "quick documentation" you will find:

• Win-Linux: "Ctrl+Q" and "Ctrl+Button2 Click" (Scroll click)
• Mac: "Ctrl+J" and "Ctrl+Button2 Click" (Scroll click)

SQL Server by default uses the mdy date format and so the below works:

SELECT convert(datetime, '07/23/2009', 111)

and this does not work:

SELECT convert(datetime, '23/07/2009', 111)

I myself have been struggling to come up with a single query that can handle both date formats: mdy and dmy.

However, you should be ok with the third date format - ymd.

Per material design guidelines, you need to use the style like below code

<style name="MyButton" parent="Theme.AppCompat.Light>
    <item name="colorControlHighlight">#F36F21</item>
    <item name="colorControlHighlight">#FF8D00</item>
</style>

and in layout add this property to your button

    android:theme="@style/MyButton"

This error can be caused by trying to end a response more than once. As other answers already mentioned, there are various methods that will end a response (like Response.End, or Response.Redirect). If you call more than one in a row, you'll get this error.

I came across this error when I tried to use Response.End after using Response.TransmitFile which seems to end the response too.

select owner, table_name, num_rows, sample_size, last_analyzed from all_tables;

This is the fastest way to retrieve the row counts but there are a few important caveats:

1. NUM_ROWS is only 100% accurate if statistics were gathered in 11g and above with ESTIMATE_PERCENT => DBMS_STATS.AUTO_SAMPLE_SIZE (the default), or in earlier versions with ESTIMATE_PERCENT => 100. See this post for an explanation of how the AUTO_SAMPLE_SIZE algorithm works in 11g.
2. Results were generated as of LAST_ANALYZED, the current results may be different.

You want to use Apache's CloseShieldInputStream:

This is a wrapper that will prevent the stream from being closed. You'd do something like this.

InputStream is = null;

is = getStream(); //obtain the stream 
CloseShieldInputStream csis = new CloseShieldInputStream(is);

// call the bad function that does things it shouldn't
badFunction(csis);

// happiness follows: do something with the original input stream
is.read();

Here's how I do file upload in react using axios

import React from 'react'
import axios, { post } from 'axios';

class SimpleReactFileUpload extends React.Component {

  constructor(props) {
    super(props);
    this.state ={
      file:null
    }
    this.onFormSubmit = this.onFormSubmit.bind(this)
    this.onChange = this.onChange.bind(this)
    this.fileUpload = this.fileUpload.bind(this)
  }

  onFormSubmit(e){
    e.preventDefault() // Stop form submit
    this.fileUpload(this.state.file).then((response)=>{
      console.log(response.data);
    })
  }

  onChange(e) {
    this.setState({file:e.target.files[0]})
  }

  fileUpload(file){
    const url = 'http://example.com/file-upload';
    const formData = new FormData();
    formData.append('file',file)
    const config = {
        headers: {
            'content-type': 'multipart/form-data'
        }
    }
    return  post(url, formData,config)
  }

  render() {
    return (
      <form onSubmit={this.onFormSubmit}>
        <h1>File Upload</h1>
        <input type="file" onChange={this.onChange} />
        <button type="submit">Upload</button>
      </form>
   )
  }
}



export default SimpleReactFileUpload

Source

You might also consider adding ".

For example for %i in (*.wav) do opusenc "%~ni.wav" "%~ni.opus" is very good idea.

This has been driving me crazy for literally weeks. I found a solution that will work for me that includes:

1. Non-fixed column widths - they shrink and grow on window resizing.
2. Table has a horizontal scroll-bar when needed, but not when it isn't.
3. Number of columns is irrelevant - it will size to however many columns you need it to.
4. Not all columns need to be the same width.
5. Header goes all the way to the end of the right scrollbar.
6. No javascript!

...but there are a couple of caveats:

1. The vertical scrollbar is not visible until you scroll all the way to the right. Given that most people have scroll wheels, this was an acceptable sacrifice.

2. The width of the scrollbar must be known. On my website I set the scrollbar widths (I'm not overly concerned with older, incompatible browsers), so I can then calculate div and table widths that adjust based on the scrollbar.

Instead of posting my code here, I'll post a link to the jsFiddle.

Fixed header table + scroll left/right.

Edited on 1/2/15

C# 6 :

With C# 6 you can initialize auto-properties directly (finally!), there are now other answers in the thread that describe that.

C# 5 and below:

Though the intended use of the attribute is not to actually set the values of the properties, you can use reflection to always set them anyway...

public class DefaultValuesTest
{    
    public DefaultValuesTest()
    {               
        foreach (PropertyDescriptor property in TypeDescriptor.GetProperties(this))
        {
            DefaultValueAttribute myAttribute = (DefaultValueAttribute)property.Attributes[typeof(DefaultValueAttribute)];

            if (myAttribute != null)
            {
                property.SetValue(this, myAttribute.Value);
            }
        }
    }

    public void DoTest()
    {
        var db = DefaultValueBool;
        var ds = DefaultValueString;
        var di = DefaultValueInt;
    }


    [System.ComponentModel.DefaultValue(true)]
    public bool DefaultValueBool { get; set; }

    [System.ComponentModel.DefaultValue("Good")]
    public string DefaultValueString { get; set; }

    [System.ComponentModel.DefaultValue(27)]
    public int DefaultValueInt { get; set; }
}

You need to go to user accounts and enable Guest Account, its default disabled. Once you do this, you share any folder and add the guest account to the list of users who can accesss that specific folder, this also includes to Turn off password Protected Sharing in 'Advanced Sharing Settings'

The other way to do this where you only enter a password once is to join a Homegroup. if you have a network of 2 or more computers, they can all connect to a homegroup and access all the files they need from each other, and anyone outside the group needs a 1 time password to be able to access your network, this was introduced in windows 7.

Tested and working!

• with https, user & password

   <?php 
   //Data, connection, auth
   $dataFromTheForm = $_POST['fieldName']; // request data from the form
   $soapUrl = "https://connecting.website.com/soap.asmx?op=DoSomething"; // asmx URL of WSDL
   $soapUser = "username";  //  username
   $soapPassword = "password"; // password
  
   // xml post structure
  
   $xml_post_string = '<?xml version="1.0" encoding="utf-8"?>
                       <soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
                         <soap:Body>
                           <GetItemPrice xmlns="http://connecting.website.com/WSDL_Service"> // xmlns value to be set to your WSDL URL
                             <PRICE>'.$dataFromTheForm.'</PRICE> 
                           </GetItemPrice >
                         </soap:Body>
                       </soap:Envelope>';   // data from the form, e.g. some ID number
  
      $headers = array(
                   "Content-type: text/xml;charset=\"utf-8\"",
                   "Accept: text/xml",
                   "Cache-Control: no-cache",
                   "Pragma: no-cache",
                   "SOAPAction: http://connecting.website.com/WSDL_Service/GetPrice", 
                   "Content-length: ".strlen($xml_post_string),
               ); //SOAPAction: your op URL
  
       $url = $soapUrl;
  
       // PHP cURL  for https connection with auth
       $ch = curl_init();
       curl_setopt($ch, CURLOPT_SSL_VERIFYPEER, 1);
       curl_setopt($ch, CURLOPT_URL, $url);
       curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
       curl_setopt($ch, CURLOPT_USERPWD, $soapUser.":".$soapPassword); // username and password - declared at the top of the doc
       curl_setopt($ch, CURLOPT_HTTPAUTH, CURLAUTH_ANY);
       curl_setopt($ch, CURLOPT_TIMEOUT, 10);
       curl_setopt($ch, CURLOPT_POST, true);
       curl_setopt($ch, CURLOPT_POSTFIELDS, $xml_post_string); // the SOAP request
       curl_setopt($ch, CURLOPT_HTTPHEADER, $headers);
  
       // converting
       $response = curl_exec($ch); 
       curl_close($ch);
  
       // converting
       $response1 = str_replace("<soap:Body>","",$response);
       $response2 = str_replace("</soap:Body>","",$response1);
  
       // convertingc to XML
       $parser = simplexml_load_string($response2);
       // user $parser to get your data out of XML response and to display it. 
   ?>
  

You can just add the padding to tour block element and add background-origin style like so:

.block {
  position: relative;
  display: inline-block;
  padding: 10px 12px;
  border:1px solid #e5e5e5;
  background-size: contain;
  background-position: center;
  background-repeat: no-repeat;
  background-origin: content-box;
  background-image: url(_your_image_);
  height: 14rem;
  width: 10rem;
}

You can check several https://www.w3schools.com/cssref/css3_pr_background-origin.asp

In Linux, try to run studio.sh from a terminal and set the ANDROID_HOME in this terminal. This worked for me.

If you need to concatenate paths with quotes, you can use = to replace quotes in a variable. This does not require you to know if the path already contains quotes or not. If there are no quotes, nothing is changed.

@echo off
rem Paths to combine
set DIRECTORY="C:\Directory with spaces"
set FILENAME="sub directory\filename.txt"

rem Combine two paths
set COMBINED="%DIRECTORY:"=%\%FILENAME:"=%"
echo %COMBINED%

rem This is just to illustrate how the = operator works
set DIR_WITHOUT_SPACES=%DIRECTORY:"=%
echo %DIR_WITHOUT_SPACES%

You need to add the jar file in the classpath. To compile your java class:

javac -cp .;jwitter.jar MyClass.java

To run your code (provided that MyClass contains a main method):

java -cp .;jwitter.jar MyClass

You can have the jar file anywhere. The above work if the jar file is in the same directory as your java file.

add some id for an input

var multi = product(2,3);
document.getElementById('id').value=multi;

From the standard library:

os.getpid()

In Eclipse Neo
1. Window -> Show view -> Servers
2. Right click on server -> choose Properties
3. From General Tab -> Switch Location

You have not appended your li as a child to your ul element

Try this

function function1() {
  var ul = document.getElementById("list");
  var li = document.createElement("li");
  li.appendChild(document.createTextNode("Four"));
  ul.appendChild(li);
}

If you need to set the id , you can do so by

li.setAttribute("id", "element4");

Which turns the function into

function function1() {
  var ul = document.getElementById("list");
  var li = document.createElement("li");
  li.appendChild(document.createTextNode("Four"));
  li.setAttribute("id", "element4"); // added line
  ul.appendChild(li);
  alert(li.id);
}

Here is short example of how serialization works. I was also learning about the same and I found two links useful. What Serialization is and how it can be done in .NET.

A sample program explaining serialization

If you don't understand the above program a much simple program with explanation is given here.

Warning: Never ever refer to w3schools for learning purposes. They have so many mistakes in their tutorials.

According to the mysqli_query documentation, the first parameter must be a connection string:

$link = mysqli_connect("localhost","root","","web_table");

mysqli_query($link,"INSERT INTO web_formitem (`ID`, `formID`, `caption`, `key`, `sortorder`, `type`, `enabled`, `mandatory`, `data`)
VALUES (105, 7, 'Tip izdelka (6)', 'producttype_6', 42, 5, 1, 0, 0)") 
or die(mysqli_error($link));

Note: Add backticks ` for column names in your insert query as some of your column names are reserved words.

My favorite no-conflict-friendly construct:

jQuery(function($) {
  // ...
});

Calling jQuery with a function pointer is a shortcut for $(document).ready(...)

Or as we say in coffeescript:

jQuery ($) ->
  # code here

Hopefully this can help others: The above examples use ax.lines. With more recent mpl (3.3.1), there is ax.get_lines(). This bypasses the need for calling ax.lines=[]

for line in ax.get_lines(): # ax.lines:
    line.remove()
# ax.lines=[] # needed to complete removal when using ax.lines

Change the names of your inputs:

<input name="xyz[]" value="Lorem" />
<input name="xyz[]" value="ipsum"  />
<input name="xyz[]" value="dolor" />
<input name="xyz[]" value="sit" />
<input name="xyz[]" value="amet" />

Then:

$_POST['xyz'][0] == 'Lorem'
$_POST['xyz'][4] == 'amet'

If so, that would make my life ten times easier, as I could send an indefinite amount of information through a form and get it processed by the server simply by looping through the array of items with the name "xyz".

Note that this is probably the wrong solution. Obviously, it depends on the data you are sending.

I would suggest adding stdout and stderr file in systemd service file itself.

Referring : https://www.freedesktop.org/software/systemd/man/systemd.exec.html#StandardOutput=

As you have configured it should not like:

StandardOutput=/home/user/log1.log
StandardError=/home/user/log2.log

It should be:

StandardOutput=file:/home/user/log1.log
StandardError=file:/home/user/log2.log

This works when you don't want to restart the service again and again.

This will create a new file and does not append to the existing file.

Use Instead:

StandardOutput=append:/home/user/log1.log
StandardError=append:/home/user/log2.log

NOTE: Make sure you create the directory already. I guess it does not support to create a directory.

Use $http Interceptor

By using an $http interceptor you can send headers to Back-end or the other way around and do your checks that way.

Great article on $http interceptors

Example:

$httpProvider.interceptors.push(function ($q) {
        return {
            'response': function (response) {

                // TODO Create check for user authentication. With every request send "headers" or do some other check
                return response;
            },
            'responseError': function (reject) {

                // Forbidden
                if(reject.status == 403) {
                    console.log('This page is forbidden.');
                    window.location = '/';
                // Unauthorized
                } else if(reject.status == 401) {
                    console.log("You're not authorized to view this page.");
                    window.location = '/';
                }

                return $q.reject(reject);
            }
        };
    });

Put this in your .config or .run function.

With LInQer you can do:

Enumerable.from(list).take(3).toArray();

you can make a function that do this job and use it

#include <stdio.h>

void repeat (char input , int count )
{
    for (int i=0; i != count; i++ )
    {
        printf("%c", input);
    }
}

int main()
{
    repeat ('#', 5);
    return 0;
}

This will output

#####

$diff_min = ( strtotime( $day2 ) - strtotime( $day1 ) ) / 60 / 60;
$total_time  = $diff_min;

You can try this one.

There are three versions: assembly, file, and product. They are used by different features and take on different default values if you don't explicit specify them.

string assemblyVersion = Assembly.GetExecutingAssembly().GetName().Version.ToString(); 
string assemblyVersion = Assembly.LoadFile("your assembly file").GetName().Version.ToString(); 
string fileVersion = FileVersionInfo.GetVersionInfo(Assembly.GetExecutingAssembly().Location).FileVersion; 
string productVersion = FileVersionInfo.GetVersionInfo(Assembly.GetExecutingAssembly().Location).ProductVersion;

For a similar application I had to wrap my data object with JSON.stringify() like this:

data: JSON.stringify({ 
  'foo': 'bar', 
  'ca$libri': 'no$libri'
}),

The API was working with a REST client but couldn't get it to function with jquery ajax in the browser. stringify was the solution.

stage.setOnCloseRequest(new EventHandler<WindowEvent>() {
    public void handle(WindowEvent we) {                        
        Platform.setImplicitExit(false);
        stage.close();
    }
});

It is equivalent to hide. So when you are going to open it next time, you just check if the stage object is exited or not. If it is exited, you just show() i.e. (stage.show()) call. Otherwise, you have to start the stage.

For any one who looks for answer yet:

1.Add jackson-databind library to your build tools like Gradle or Maven

2.in your Code:

ObjectMapper mapper = new ObjectMapper();

List<Student> studentList = new ArrayList<>();

studentList = Arrays.asList(mapper.readValue(jsonStringArray, Student[].class));

Okay so you are trying to get a bitmap from a file? Title says URL. Anyways, when you are getting files from external storage in Android you should never use a direct path. Instead call getExternalStorageDirectory() like so:

File bitmapFile = new File(Environment.getExternalStorageDirectory() + "/" + PATH_TO_IMAGE);
Bitmap bitmap = BitmapFactory.decodeFile(bitmapFile);

getExternalStorageDirectory() gives you the path to the SD card. Also you need to declare the WRITE_EXTERNAL_STORAGE permission in the Manifest.

instead of using:

Application.Wait(Now + #0:00:01#)

i prefer:

Application.Wait(Now + TimeValue("00:00:01"))

because it is a lot easier to read afterwards.

change the div to display block

.topbar{
    display:block;
    width:100%;
    height:70px;
    background-color:#475;
    overflow:scroll;
    }

i made a jsfiddle example here please check

http://jsfiddle.net/TgPRM/

If you simply want a Uri for a method that has a route annotation, the following worked for me.

Steps

Get Relative URL

Noting the Route name of the target action, get the relative URL using the controller's URL property as follows:

var routeUrl = Url.RouteUrl("*Route Name Here*", new { *Route parameters here* });

Create an absolute URL

var absUrl = string.Format("{0}://{1}{2}", Request.Scheme,
            Request.Host, routeUrl);

Create a new Uri

var uri = new Uri(absUrl, UriKind.Absolute)

Example

[Produces("application/json")]
[Route("api/Children")]
public class ChildrenController : Controller
{
    private readonly ApplicationDbContext _context;

    public ChildrenController(ApplicationDbContext context)
    {
        _context = context;
    }

    // GET: api/Children
    [HttpGet]
    public IEnumerable<Child> GetChild()
    {
        return _context.Child;
    }

    [HttpGet("uris")]
    public IEnumerable<Uri> GetChildUris()
    {
        return from c in _context.Child
               select
                   new Uri(
                       $"{Request.Scheme}://{Request.Host}{Url.RouteUrl("GetChildRoute", new { id = c.ChildId })}",
                       UriKind.Absolute);
    }


    // GET: api/Children/5
    [HttpGet("{id}", Name = "GetChildRoute")]
    public IActionResult GetChild([FromRoute] int id)
    {
        if (!ModelState.IsValid)
        {
            return HttpBadRequest(ModelState);
        }

        Child child = _context.Child.Single(m => m.ChildId == id);

        if (child == null)
        {
            return HttpNotFound();
        }

        return Ok(child);
    }
}

For quick and dirty:

year, month, day, hour, minute, second = xlrd.xldate_as_tuple(excelDate, wb.datemode)
whatYouWant = str(month)+'/'+str(day)+'/'+str(year)

A browser will only open a tab/popup without the popup blocker warning if the command to open the tab/popup comes from a trusted event. That means the user has to actively click somewhere to open a popup.

In your case, the user performs a click so you have the trusted event. You do lose that trusted context, however, by performing the Ajax request. Your success handler does not have that event anymore. The only way to circumvent this is to perform a synchronous Ajax request which will block your browser while it runs, but will preserve the event context.

In jQuery this should do the trick:

$.ajax({
 url: 'http://yourserver/',
 data: 'your image',
 success: function(){window.open(someUrl);},
 async: false
});

Here is your answer: Open new tab without popup blocker after ajax call on user click

/usr/local/ssl/openssl.cnf

This is a local installation. You downloaded and built OpenSSL taking the default prefix, of you configured with ./config --prefix=/usr/local/ssl or ./config --openssldir=/usr/local/ssl.

You will use this if you use the OpenSSL in /usr/local/ssl/bin. That is, /usr/local/ssl/openssl.cnf will be used when you issue:

/usr/local/ssl/bin/openssl s_client -connect localhost:443 -tls1 -servername localhost

/usr/lib/ssl/openssl.cnf

This is where Ubuntu places openssl.cnf for the OpenSSL they provide.

You will use this if you use the OpenSSL in /usr/bin. That is, /usr/lib/ssl/openssl.cnf will be used when you issue:

openssl s_client -connect localhost:443 -tls1 -servername localhost

/etc/ssl/openssl.cnf

I don't know when this is used. The stuff in /etc/ssl is usually certificates and private keys, and it sometimes contains a copy of openssl.cnf. But I've never seen it used for anything.

Which is the main/correct one that I should use to make changes?

From the sounds of it, you should probably add the engine to /usr/lib/ssl/openssl.cnf. That ensures most "off the shelf" gear will use the new engine.

After you do that, add it to /usr/local/ssl/openssl.cnf also because copy/paste is easy.

Here's how to see which openssl.cnf directory is associated with a OpenSSL installation. The library and programs look for openssl.cnf in OPENSSLDIR. OPENSSLDIR is a configure option, and its set with --openssldir.

I'm on a MacBook with 3 different OpenSSL's (Apple's, MacPort's and the one I build):

# Apple    
$ /usr/bin/openssl version -a | grep OPENSSLDIR
OPENSSLDIR: "/System/Library/OpenSSL"

# MacPorts
$ /opt/local/bin/openssl version -a | grep OPENSSLDIR
OPENSSLDIR: "/opt/local/etc/openssl"

# My build of OpenSSL
$ openssl version -a | grep OPENSSLDIR
OPENSSLDIR: "/usr/local/ssl/darwin"

I have an Ubuntu system and I have installed openssl.

Just bike shedding, but be careful of Ubuntu's version of OpenSSL. It disables TLSv1.1 and TLSv1.2, so you will only have clients capable of older cipher suites; and you will not be able to use newer ciphers like AES/CTR (to replace RC4) and elliptic curve gear (like ECDHE_ECDSA_* and ECDHE_RSA_*). See Ubuntu 12.04 LTS: OpenSSL downlevel version is 1.0.0, and does not support TLS 1.2 in Launchpad.

EDIT: Ubuntu enabled TLS 1.1 and TLS 1.2 recently. See Comment 17 on the bug report.

This format works, but it doesn't seem to be an official way of doing so

http://maps.google.com/maps?q=loc:36.26577,-92.54324

Also you may want to take a look at this. They have a few answers and seem to indicate that this is the new method:

http://maps.google.com/maps?&z=10&q=36.26577+-92.54324&ll=36.26577+-92.54324

.a files are static libraries typically generated by the archive tool. You usually include the header files associated with that static library and then link to the library when you are compiling.

Using this code you can write to a text file in the SDCard. Along with it, you need to set a permission in the Android Manifest.

<uses-permission android:name="android.permission.WRITE_EXTERNAL_STORAGE" />

This is the code :

public void generateNoteOnSD(Context context, String sFileName, String sBody) {
    try {
        File root = new File(Environment.getExternalStorageDirectory(), "Notes");
        if (!root.exists()) {
            root.mkdirs();
        }
        File gpxfile = new File(root, sFileName);
        FileWriter writer = new FileWriter(gpxfile);
        writer.append(sBody);
        writer.flush();
        writer.close();
        Toast.makeText(context, "Saved", Toast.LENGTH_SHORT).show();
    } catch (IOException e) {
        e.printStackTrace();
    }
}

Before writing files you must also check whether your SDCard is mounted & the external storage state is writable.

Environment.getExternalStorageState()

. ~/.bashrc

. is a POSIX-mandated builtin

Alternatives

source ~/.bashrc

source is a synonym for dot/period . in bash, but not in POSIX sh, so for maximum compatibility use the period.

exec bash

• exec command replaces the shell with a given program... – WhoSayIn

Sure you can use isinstance, but be aware that this is not how Python works. Python is a duck typed language. You should not explicitly check your types. A TypeError will be raised if the incorrect type was passed.

So just assume it is an int. Don't bother checking.

You can use nonHistorySelectors option from jquery mobile where you do not want to track history. You can find the detailed documentation here http://jquerymobile.com/demos/1.0a4.1/#docs/api/globalconfig.html

No there is no byte data type in C++. However you could always include the bitset header from the standard library and create a typedef for byte:

typedef bitset<8> BYTE;

NB: Given that WinDef.h defines BYTE for windows code, you may want to use something other than BYTE if your intending to target Windows.

Edit: In response to the suggestion that the answer is wrong. The answer is not wrong. The question was "Is there a 'byte' data type in C++?". The answer was and is: "No there is no byte data type in C++" as answered.

With regards to the suggested possible alternative for which it was asked why is the suggested alternative better?

According to my copy of the C++ standard, at the time:

"Objects declared as characters (char) shall be large enough to store any member of the implementations basic character set": 3.9.1.1

I read that to suggest that if a compiler implementation requires 16 bits to store a member of the basic character set then the size of a char would be 16 bits. That today's compilers tend to use 8 bits for a char is one thing, but as far as I can tell there is certainly no guarantee that it will be 8 bits.

On the other hand, "the class template bitset<N> describes an object that can store a sequence consisting of a fixed number of bits, N." : 20.5.1. In otherwords by specifying 8 as the template parameter I end up with an object that can store a sequence consisting of 8 bits.

Whether or not the alternative is better to char, in the context of the program being written, therefore depends, as far as I understand, although I may be wrong, upon your compiler and your requirements at the time. It was therefore upto the individual writing the code, as far as I'm concerned, to do determine whether the suggested alternative was appropriate for their requirements/wants/needs.

The following does not return a response:

You must return anything like return afunction() or return 'a string'.

This can solve the issue

str.join() works fine in Python 3, you just need to get the order of the arguments correct

>>> str.join('.', ('a', 'b', 'c'))
'a.b.c'

It depends what is the character and what encoding it is in:

• An ASCII character in 8-bit ASCII encoding is 8 bits (1 byte), though it can fit in 7 bits.

• An ISO-8895-1 character in ISO-8859-1 encoding is 8 bits (1 byte).

• A Unicode character in UTF-8 encoding is between 8 bits (1 byte) and 32 bits (4 bytes).

• A Unicode character in UTF-16 encoding is between 16 (2 bytes) and 32 bits (4 bytes), though most of the common characters take 16 bits. This is the encoding used by Windows internally.

• A Unicode character in UTF-32 encoding is always 32 bits (4 bytes).

• An ASCII character in UTF-8 is 8 bits (1 byte), and in UTF-16 - 16 bits.

• The additional (non-ASCII) characters in ISO-8895-1 (0xA0-0xFF) would take 16 bits in UTF-8 and UTF-16.

That would mean that there are between 0.03125 and 0.125 characters in a bit.

Check this fiddle.

 $('#email').bind("cut copy paste",function(e) {
     e.preventDefault();
 });

You need to bind what should be done on cut, copy and paste. You prevent default behavior of the action.

You can find a detailed explanation here.

In Java, generics are implemented by means of type erasure. For instance, the following code.

List<String> hello = List.of("a", "b");
String example = hello.get(0);

Is compiled to the following.

List hello = List.of("a", "b");
String example = (String) hello.get(0);

And List.of is defined as.

static <E> List<E> of(E e1, E e2);

Which after type erasure becomes.

static List of(Object e1, Object e2);

The compiler has no idea what are generic types at runtime, so if you write something like this.

Object list = List.of("a", "b");
List<Integer> actualList = (List<Integer>) list;

Java Virtual Machine has no idea what generic types are while running a program, so this compiles and runs, as for Java Virtual Machine, this is a cast to List type (this is the only thing it can verify, so it verifies only that).

But now add this line.

Integer hello = actualList.get(0);

And JVM will throw an unexpected ClassCastException, as Java compiler inserted an implicit cast.

java.lang.ClassCastException: java.base/java.lang.String cannot be cast to java.base/java.lang.Integer

An unchecked warning tells a programmer that a cast may cause a program to throw an exception somewhere else. Suppressing the warning with @SuppressWarnings("unchecked") tells the compiler that the programmer believes the code to be safe and won't cause unexpected exceptions.

Why would you want to do that? Java type system isn't good enough to represent all possible type usage patterns. Sometimes you may know that a cast is safe, but Java doesn't provide a way to say so - to hide warnings like this, @SupressWarnings("unchecked") can be used, so that a programmer can focus on real warnings. For instance, Optional.empty() returns a singleton to avoid allocation of empty optionals that don't store a value.

private static final Optional<?> EMPTY = new Optional<>();
public static<T> Optional<T> empty() {
    @SuppressWarnings("unchecked")
    Optional<T> t = (Optional<T>) EMPTY;
    return t;
}

This cast is safe, as the value stored in an empty optional cannot be retrieved so there is no risk of unexpected class cast exceptions.

What worked for me in Win 7 is to remove the Host-only Network (in Oracle virtual box preferences menu [CTRL+G] -> Network -> host only networks). Genymotion will recreate it automatically at the next virtual device start.

In case you want to pass in a block, say, for a glyphicon button, as in the following:

<%= link_to my_url, class: "stuff" do %>
  <i class="glyphicon glyphicon-inbox></i> Nice glyph-button
<% end %>

Then passing querystrings params could be accomplished through:

<%= link_to url_for(params.merge(my_params: "value")), class: "stuff" do %>
  <i class="glyphicon glyphicon-inbox></i> Nice glyph-button
<% end %>

See, here you can get only date by passing a format string. You can get a different date format as per your requirement as given below for current date:

DateTime.Now.ToString("M/d/yyyy");

Result : "9/1/2015"

DateTime.Now.ToString("M-d-yyyy");

Result : "9-1-2015"

DateTime.Now.ToString("yyyy-MM-dd");

Result : "2015-09-01"

DateTime.Now.ToString("yyyy-MM-dd hh:mm:ss");

Result : "2015-09-01 09:20:10"

For more details take a look at MSDN reference for Custom Date and Time Format Strings

if (input == undefined) { ... }

works just fine. It is of course not a null comparison, but I usually find that if I need to distinguish between undefined and null, I actually rather need to distinguish between undefined and just any false value, so

else if (input) { ... }

does it.

If a program redefines undefined it is really braindead anyway.

The only reason I can think of was for IE4 compatibility, it did not understand the undefined keyword (which is not actually a keyword, unfortunately), but of course values could be undefined, so you had to have this:

var undefined;

and the comparison above would work just fine.

In your second example, you probably need double parentheses to make lint happy?

Here's yet another answer offering commentary on how Muis, Abdullah Al-Ageel and Flip's answer are all mathematically the same thing except written differently.

Sure, we have José Manuel Ramos's analysis explaining how rounding errors affect each slightly differently, but that's implementation dependent and would change based on how each answer were applied to code.

There is however a rather big difference

It's in Muis's N, Flip's k, and Abdullah Al-Ageel's n. Abdullah Al-Ageel doesn't quite explain what n should be, but N and k differ in that N is "the number of samples where you want to average over" while k is the count of values sampled. (Although I have doubts to whether calling N the number of samples is accurate.)

And here we come to the answer below. It's essentially the same old exponential weighted moving average as the others, so if you were looking for an alternative, stop right here.

Exponential weighted moving average

Initially:

average = 0
counter = 0

For each value:

counter += 1
average = average + (value - average) / min(counter, FACTOR)

The difference is the min(counter, FACTOR) part. This is the same as saying min(Flip's k, Muis's N).

FACTOR is a constant that affects how quickly the average "catches up" to the latest trend. Smaller the number the faster. (At 1 it's no longer an average and just becomes the latest value.)

This answer requires the running counter counter. If problematic, the min(counter, FACTOR) can be replaced with just FACTOR, turning it into Muis's answer. The problem with doing this is the moving average is affected by whatever average is initiallized to. If it was initialized to 0, that zero can take a long time to work its way out of the average.

How it ends up looking

Also, starting with .NET Core 3.0 (and .NET Standard 2.1) (C# 8) you can use Index type to keep array's indexes from end:

var lastElementIndexInAnyArraySize = ^1;
var lastElement = array[lastElementIndexInAnyArraySize];

You can use this index to get last array value in any lenght of array. For example:

var firstArray = new[] {0, 1, 1, 2, 2};
var secondArray = new[] {3, 3, 4, 4, 5, 5, 5, 5, 5, 5, 5, 5, 5};
var index = ^1;
var firstArrayLastValue = firstArray[index]; // 2
var secondArrayLastValue = secondArray[index]; // 5

For more information check documentation

Update (2019, latest)

Since Jan 2019, GitHub allows private repositories for up to three collaborators.

Previous answer:

Here is the comparison for free plans listed by tree main Git Cloud based solutions:

Here is the comparison for paid plans listed by tree main Git Cloud based solutions:

Conclusion:

I'm not seeing people mentioning GitLab here, but it seems like the best free private plan for me. I myself am using it with no problems.

GitHub: If you have a student account or want to pay for $7 monthly, GitHub has the biggest community and you can take advantage of it's public repositories, forks, etc.

Bitbucket: If you use other products from Atlassian like Jira or Confluence, Bitbucket works great with them.

GitLab: Everything that I care about (free private repository, number of private repositories, number of collaborators, etc.) are offered for free. This seems like the best choice for me.

I have the same issue. I solved after cleaned the Project (Shift(?)+Command(?)+K), exit Xcode and open again.

In the app.module.ts

import { FormsModule } from '@angular/forms';

Later in the @NgModule decorator's import:

@NgModule({
imports: [
BrowserModule,
FormsModule
]

})

Use as variable to cast the Viewbag data to your desired class in view.

@{

IEnumerable<WebApplication1.Models.Person> personlist = ViewBag.data as
IEnumerable<WebApplication1.Models.Person>;
// You may need to write WebApplication.Models.Person where WebApplication.Models is
  the namespace name where the Person class is defined. It is required so that view 
  can know about the class Person. 
}

In view write this

<td>
    @(personlist.FirstOrDefault().Name)
</td>

success has been the traditional name of the success callback in jQuery, defined as an option in the ajax call. However, since the implementation of $.Deferreds and more sophisticated callbacks, done is the preferred way to implement success callbacks, as it can be called on any deferred.

For example, success:

$.ajax({
  url: '/',
  success: function(data) {}
});

For example, done:

$.ajax({url: '/'}).done(function(data) {});

The nice thing about done is that the return value of $.ajax is now a deferred promise that can be bound to anywhere else in your application. So let's say you want to make this ajax call from a few different places. Rather than passing in your success function as an option to the function that makes this ajax call, you can just have the function return $.ajax itself and bind your callbacks with done, fail, then, or whatever. Note that always is a callback that will run whether the request succeeds or fails. done will only be triggered on success.

For example:

function xhr_get(url) {

  return $.ajax({
    url: url,
    type: 'get',
    dataType: 'json',
    beforeSend: showLoadingImgFn
  })
  .always(function() {
    // remove loading image maybe
  })
  .fail(function() {
    // handle request failures
  });

}

xhr_get('/index').done(function(data) {
  // do stuff with index data
});

xhr_get('/id').done(function(data) {
  // do stuff with id data
});

An important benefit of this in terms of maintainability is that you've wrapped your ajax mechanism in an application-specific function. If you decide you need your $.ajax call to operate differently in the future, or you use a different ajax method, or you move away from jQuery, you only have to change the xhr_get definition (being sure to return a promise or at least a done method, in the case of the example above). All the other references throughout the app can remain the same.

There are many more (much cooler) things you can do with $.Deferred, one of which is to use pipe to trigger a failure on an error reported by the server, even when the $.ajax request itself succeeds. For example:

function xhr_get(url) {

  return $.ajax({
    url: url,
    type: 'get',
    dataType: 'json'
  })
  .pipe(function(data) {
    return data.responseCode != 200 ?
      $.Deferred().reject( data ) :
      data;
  })
  .fail(function(data) {
    if ( data.responseCode )
      console.log( data.responseCode );
  });
}

xhr_get('/index').done(function(data) {
  // will not run if json returned from ajax has responseCode other than 200
});

Read more about $.Deferred here: http://api.jquery.com/category/deferred-object/

NOTE: As of jQuery 1.8, pipe has been deprecated in favor of using then in exactly the same way.

Exceptions are logged into the JavaScript console. You can use that if you want to keep Firebug disabled.

function log(msg) {
    setTimeout(function() {
        throw new Error(msg);
    }, 0);
}

Usage:

log('Hello World');
log('another message');

You could try:

var path = @"/Users/smcho/filegen_from_directory/AIRPassthrough/";
var dirName = new DirectoryInfo(path).Name;