Now that Xcode has upgraded their IDE, they have changed a little bit how this functions.

It used to be split up into separate section as demonstrated above with 'Embedded Binaries' and 'Linked Frameworks and Libraries' as separate sections.

Now, it is one combined section with drop-downs on the right as to what should be embedded.

This was confusing to me at first, but makes perfect sense now.

tl;dr

Use null for set a variable you know it is an Object.

Use undefined for set a variable whose type is mixed.

This is my usage of both 5 primitives and Object type, and that explain the difference between « use case » of undefined or null.

String

If you know a variable is only a string while all lifecycle, by convention, you could initialize it, to "":

("") ? true : false; // false
typeof ""; // "string";
("Hello World") ? true : false; // true
typeof "Hello World"; // "string"

Number

If you know a variable is only a number while all lifecycle, by convention, you could initialize it, to 0 (or NaN if 0 is an important value in your usage):

(0) ? true : false; // false
typeof 0; // "number";
(16) ? true : false; // true
typeof 16; // "number"

or

(NaN) ? true : false; // false
typeof NaN; // "number";
(16) ? true : false; // true
typeof 16; // "number"

Boolean

If you know a variable is only a boolean while all lifecycle, by convention, you could initialize it, to false:

(false) ? true : false; // false
typeof false; // "boolean";
(true) ? true : false; // true
typeof true; // "boolean"

Object

If you know a variable is only an Object while all lifecycle, by convention, you could initialize it, to null:

(null) ? true : false; // false
typeof null; // "object";
({}) ? true : false; // true
typeof {}; // "object"

Note: the smart usage off null is to be the falsy version of an Object because an Object is always true, and because typeof null return object. That means typeof myVarObject return consistent value for both Object and null type.

All

If you know a variable has a mixed type (any type while all lifecycle), by convention, you could initialize it, to undefined.

We all know this works.

INSERT INTO `TableName`(`col-1`,`col-2`)
SELECT  `col-1`,`col-2` 

===========================
Below method can be used in case of multiple "select" statements. Just for information.

INSERT INTO `TableName`(`col-1`,`col-2`)
 select 1,2  union all
 select 1,2   union all
 select 1,2 ;

You can update a metadata annotation that is not relevant for your deployment. it will trigger a rolling-update

for example:

    spec:
      template:
        metadata:
          annotations:
            configmap-version: 1

Just use square brackets instead:

print arr[1,1]

I would like to improve weston's and Roger Huang's answers for over API 21 Android lollipop with theme "Theme.AppCompat".

Below Android 4.4

<resources>
    <style name="AppBaseTheme" parent="Theme.AppCompat.Light">
    </style>

   <!-- Application theme. -->
   <style name="AppTheme" parent="AppBaseTheme">
       <item name="android:typeface">monospace</item>
   </style>
</resources>

Over(equal) API 5.0

<resources>
    <style name="AppBaseTheme" parent="Theme.AppCompat.Light">
    </style>

   <!-- Application theme. -->
   <style name="AppTheme" parent="AppBaseTheme">
       <item name="android:textAppearance">@style/CustomTextAppearance</item>
   </style>

   <style name="CustomTextAppearance">
       <item name="android:typeface">monospace</item>
   </style>
</resources>

And the FontsOverride util file is same as what in weston's answer. I have tested in these phones:

Nexus 5(android 5.1 Primary Android System)

ZTE V5(android 5.1 CM12.1)

XIAOMI note(android 4.4 MIUI6)

HUAWEI C8850(android 2.3.5 UNKNOWN)

Also, You can write all inline, direct at html code:

<input type="file" id="imgupload">
<a href="#" onclick="$('#imgupload').trigger('click'); return false;">Upload file</a>

return false; - will be useful to decline anchor action after link was clicked.

You can think of internal conversion of that as a multiple statements;

• case 1

i++;

you can think it as,

i;
i = i+1;

• case 2

++i;

you can think it as,

i = i+i;
i;

Open $CATALINA_BASE/conf/web.xml and find this

<!-- ==================== Default Session Configuration ================= -->
<!-- You can set the default session timeout (in minutes) for all newly   -->
<!-- created sessions by modifying the value below.                       -->

<session-config>
  <session-timeout>30</session-timeout>
</session-config>

all webapps implicitly inherit from this default web descriptor. You can override session-config as well as other settings defined there in your web.xml.

This is actually from my Tomcat 7 (Windows) but I think 5.5 conf is not very different

This is tricky; the reason it's failing is that you can't position via margin or text-align while absolutely positioned.

If the image is alone in the div, then I recommend something like this:

.image_block {
    width: 175px;
    height: 175px;
    line-height: 175px;
    text-align: center;
    vertical-align: bottom;
}

You may need to stick the vertical-align call on the image instead; not really sure without testing it. Using vertical-align and line-height is going to treat you a lot better, though, than trying to mess around with absolute positioning.

If pattern match, copy next line into the pattern buffer, delete a return, then quit -- side effect is to print.

sed '/pattern/ { N; s/.*\n//; q }; d'

check this below code. this is for dropdown menu. In this if we select others then the text box will show otherwise text box will hide.

function show_txt(arg,arg1)
{
if(document.getElementById(arg).value=='other')
{
document.getElementById(arg1).style.display="block";
document.getElementById(arg).style.display="none";
}
else
{
document.getElementById(arg).style.display="block";
document.getElementById(arg1).style.display="none";
}
}
The HTML code here :

<select id="arg" onChange="show_txt('arg','arg1');">
<option>yes</option>
<option>No</option>
<option>Other</option>
</select>
<input type="text" id="arg1" style="display:none;">

or you can check this link click here

What database are you on? With MS SQL Server, it's a database-wide setting, or you can over-ride it per-query with the COLLATE keyword.

Get at number:

window.getComputedStyle( *Element* , null).getPropertyValue( *CSS* );

Example:

window.getComputedStyle( document.body ,null).getPropertyValue('background-color');  
window.getComputedStyle( document.body ,null).getPropertyValue('width');  
~ document.body.clientWidth

If you want to add a new record in the form

newRecord = [4L, 1L, u'DDD', 1689544L, datetime.datetime(2010, 9, 21, 21, 45), u'jhhjjh']

to messageName where messageName in the form X_somemessage can, but does not have to be in your dictionary, then do it this way:

myDict.setdefault(messageName, []).append(newRecord)

This way it will be appended to an existing messageName or a new list will be created for a new messageName.

Parallel programming happens when code is being executed at the same time and each execution is independent of the other. Therefore, there is usually not a preoccupation about shared variables and such because that won't likely happen.

However, concurrent programming consists on code being executed by different processes/threads that share variables and such, therefore on concurrent programming we must establish some sort of rule to decide which process/thread executes first, we want this so that we can be sure there will be consistency and that we can know with certainty what will happen. If there is no control and all threads compute at the same time and store things on the same variables, how would we know what to expect in the end? Maybe a thread is faster than the other, maybe one of the threads even stopped in the middle of its execution and another continued a different computation with a corrupted (not yet fully computed) variable, the possibilities are endless. It's in these situations that we usually use concurrent programming instead of parallel.

You can also write a simple method like below

public static String padString(String str, int leng) {
        for (int i = str.length(); i <= leng; i++)
            str += " ";
        return str;
    }

Edit the following entry in the run.conf file. But if you have multiple JVMs running on the same JBoss, you might want to run it via command line argument of -Xms2g -Xmx4g (or whatever your preferred start/max memory settings are.

if [ "x$JAVA_OPTS" = "x" ]; then
    JAVA_OPTS="-Xms2g -Xmx4g -XX:MaxPermSize=256m -Dorg.jboss.resolver.warning=true

Complementing the above answers and also "Parroting" from the Windows Dev Center documentation,

The Winsock2.h header file internally includes core elements from the Windows.h header file, so there is not usually an #include line for the Windows.h header file in Winsock applications. If an #include line is needed for the Windows.h header file, this should be preceded with the #define WIN32_LEAN_AND_MEAN macro. For historical reasons, the Windows.h header defaults to including the Winsock.h header file for Windows Sockets 1.1. The declarations in the Winsock.h header file will conflict with the declarations in the Winsock2.h header file required by Windows Sockets 2.0. The WIN32_LEAN_AND_MEAN macro prevents the Winsock.h from being included by the Windows.h header ..

Just note to use the last_working_commit_id, when reverting a non-working commit

git reset --hard <last_working_commit_id>

So we must not reset to the commit_id that we don't want.

Then sure, we must push to remote branch:

git push --force

Best-for-now Legacy Browser Frame Breaking Script

The other solutions did not worked for me. This one works on all browsers:

One way to defend against clickjacking is to include a "frame-breaker" script in each page that should not be framed. The following methodology will prevent a webpage from being framed even in legacy browsers, that do not support the X-Frame-Options-Header.

In the document HEAD element, add the following:

<style id="antiClickjack">body{display:none !important;}</style>

First apply an ID to the style element itself:

<script type="text/javascript">
   if (self === top) {
       var antiClickjack = document.getElementById("antiClickjack");
       antiClickjack.parentNode.removeChild(antiClickjack);
   } else {
       top.location = self.location;
   }
</script>

This way, everything can be in the document HEAD and you only need one method/taglib in your API.

Reference: https://www.codemagi.com/blog/post/194

If you're open to a Perl solution...

perl -ane 'print "$F[0] $F[1]\n"' file

These command-line options are used:

• -n loop around every line of the input file, do not automatically print every line

• -a autosplit mode – split input lines into the @F array. Defaults to splitting on whitespace

• -e execute the following perl code

        internal static Func<string, string, bool> regKey = delegate (string KeyLocation, string Value)
        {
            // get registry key with Microsoft.Win32.Registrys
            RegistryKey rk = (RegistryKey)Registry.GetValue(KeyLocation, Value, null); // KeyLocation and Value variables from method, null object because no default value is present. Must be casted to RegistryKey because method returns object.
            if ((rk) == null) // if the RegistryKey is null which means it does not exist
            {
                // the key does not exist
                return false; // return false because it does not exist
            }
            // the registry key does exist
            return true; // return true because it does exist
        };

usage:

        // usage:
        /* Create Key - while (loading)
        {
            RegistryKey k;
            k = Registry.CurrentUser.CreateSubKey("stuff");
            k.SetValue("value", "value");
            Thread.Sleep(int.MaxValue);
        }; // no need to k.close because exiting control */


        if (regKey(@"HKEY_CURRENT_USER\stuff  ...  ", "value"))
        {
             // key exists
             return;
        }
        // key does not exist

A bit old question but I found myself needing this also and that the suggestions above were inaduquate - and as such - developed a thin wrapper myself: https://github.com/hofmeister/MatchIt

There are two ways to implement this:

1.

    $date = strtotime(date);
    $new_date = date('d-m-Y', $date);

2.

    $cls_date = new DateTime($date);
    echo $cls_date->format('d-m-Y');

I know this is quite an old question -

A = [[1, 2, 3],
     [4, 5, 6],
     [7, 8, 9]]

Let's say, you want to extract the first 2 rows and first 3 columns

A_NEW = A[0:2, 0:3]
A_NEW = [[1, 2, 3],
         [4, 5, 6]]

Understanding the syntax

A_NEW = A[start_index_row : stop_index_row, 
          start_index_column : stop_index_column)]

If one wants row 2 and column 2 and 3

A_NEW = A[1:2, 1:3]

Reference the numpy indexing and slicing article - Indexing & Slicing

Depending on what exactly you need:

• is null checks whether the value is null:

  {% if var is null %}
      {# do something #}
  {% endif %}
  

• is defined checks whether the variable is defined:

  {% if var is not defined %}
      {# do something #}
  {% endif %}
  

Additionally the is sameas test, which does a type strict comparison of two values, might be of interest for checking values other than null (like false):

{% if var is sameas(false) %}
    {# do something %}
{% endif %}

Try download the zip files from http://www.nltk.org/nltk_data/ and then unzip, save in your Python folder, such as C:\ProgramData\Anaconda3\nltk_data

You could use the Byte conversion methods from Google Guava.

Example:

byte[] bytes = Longs.toByteArray(12345L);

Normally Python throws NameError if the variable is not defined:

>>> d[0]
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
NameError: name 'd' is not defined

However, you've managed to stumble upon a name that already exists in Python.

Because dict is the name of a built-in type in Python you are seeing what appears to be a strange error message, but in reality it is not.

The type of dict is a type. All types are objects in Python. Thus you are actually trying to index into the type object. This is why the error message says that the "'type' object is not subscriptable."

>>> type(dict)
<type 'type'>
>>> dict[0]
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
TypeError: 'type' object is not subscriptable

Note that you can blindly assign to the dict name, but you really don't want to do that. It's just going to cause you problems later.

>>> dict = {1:'a'}
>>> type(dict)
<class 'dict'>
>>> dict[1]
'a'

The true source of the problem is that you must assign variables prior to trying to use them. If you simply reorder the statements of your question, it will almost certainly work:

d = {1: "walk1.png", 2: "walk2.png", 3: "walk3.png"}
m1 = pygame.image.load(d[1])
m2 = pygame.image.load(d[2])
m3 = pygame.image.load(d[3])
playerxy = (375,130)
window.blit(m1, (playerxy))

http://blog.mongodb.org/post/183689081/storing-large-objects-and-files-in-mongodb

There is a Mongoose plugin available on NPM called mongoose-file. It lets you add a file field to a Mongoose Schema for file upload. I have never used it but it might prove useful. If the images are very small you could Base64 encode them and save the string to the database.

Storing some small (under 1MB) files with MongoDB in NodeJS WITHOUT GridFS

Code for Find the Column Name same as using the Like in sql.

foreach (DataGridViewColumn column in GrdMarkBook.Columns)  
                      //GrdMarkBook is Data Grid name
{                      
    string HeaderName = column.HeaderText.ToString();

    //  This line Used for find any Column Have Name With Exam

    if (column.HeaderText.ToString().ToUpper().Contains("EXAM"))
    {
        int CoumnNo = column.Index;
    }
}

Its similar to select, But datalist has additional functionalities like auto suggest. You can even type and see suggestions as and when you type.

User will also be able to write items which is not there in list.

@recursive's solusion (The accepted answer) is 100% right. I am just adding a sample code for your reference.

My case is to display price with two decimal digits.This is part of back-end response: "price": 2300, "currencySymbol": "CD", ....

This is my helper class:

public class CurrencyUtils
{
    private static final String[] suffix = { "", "K", "M" };

    public static String getCompactStringForDisplay(final int amount)
    {
        int suffixIndex;
        if (amount >= 1_000_000) {
            suffixIndex = 2;
        } else if (amount >= 1_000) {
            suffixIndex = 1;
        } else {
            suffixIndex = 0;
        }

        int quotient;
        int remainder;
        if (amount >= 1_000_000) {
            quotient = amount / 1_000_000;
            remainder = amount % 1_000_000;
        } else if (amount >= 1_000) {
            quotient = amount / 1_000;
            remainder = amount % 1_000;
        } else {
            return String.valueOf(amount);
        }

        if (remainder == 0) {
            return String.valueOf(quotient) + suffix[suffixIndex];
        }

        // Keep two most significant digits
        if (remainder >= 10_000) {
            remainder /= 10_000;
        } else if (remainder >= 1_000) {
            remainder /= 1_000;
        } else if (remainder >= 100) {
            remainder /= 10;
        }

        return String.valueOf(quotient) + '.' + String.valueOf(remainder) + suffix[suffixIndex];
    }
}

This is my test class (based on Junit 4):

public class CurrencyUtilsTest {

    @Test
    public void getCompactStringForDisplay() throws Exception {
        int[] numbers = {0, 5, 999, 1_000, 5_821, 10_500, 101_800, 2_000_000, 7_800_000, 92_150_000, 123_200_000, 9_999_999};
        String[] expected = {"0", "5", "999", "1K", "5.82K", "10.50K", "101.80K", "2M", "7.80M", "92.15M", "123.20M", "9.99M"};

        for (int i = 0; i < numbers.length; i++) {
            int n = numbers[i];
            String formatted = CurrencyUtils.getCompactStringForDisplay(n);
            System.out.println(n + " => " + formatted);

            assertEquals(expected[i], formatted);
        }
    }

}

This should work based on your example "2011-29-01 12:00 am"

DateTime dt;
DateTime.TryParseExact(dateTime, 
                       "yyyy-dd-MM hh:mm tt", 
                       CultureInfo.InvariantCulture, 
                       DateTimeStyles.None, 
                       out dt);

Use the following attribute:

cls.__bases__

From the docs:

The tuple of base classes of a class object.

Example:

>>> str.__bases__
(<type 'basestring'>,)

Another example:

>>> class A(object):
...   pass
... 
>>> class B(object):
...   pass
... 
>>> class C(A, B):
...   pass
... 
>>> C.__bases__
(<class '__main__.A'>, <class '__main__.B'>)

If you have a PEM file (e.g. server.pem) containing:

• the trusted certificate
• the private key

then you can import the certificate and key into a JKS keystore like this:

1) Copy the private key from the PEM file into an ascii file (e.g. server.key)

2) Copy the cert from the PEM file into an ascii file (e.g. server.crt)

3) Export the cert and key into a PKCS12 file:

$ openssl pkcs12 -export -in server.crt -inkey server.key \
                 -out server.p12 -name [some-alias] -CAfile server.pem -caname root

• the PEM file can be used as the argument to the -CAfile option.
• you are prompted for an 'export' password.
• if doing this in git bash then add winpty to the start of the command so the export password can be entered.

4) Convert the PKCS12 file to a JKS keystore:

$ keytool -importkeystore -deststorepass changeit -destkeypass changeit \
          -destkeystore keystore.jks  -srckeystore server.p12 -srcstoretype PKCS12 \
          -srcstorepass changeit

• the srcstorepass password should match the export password from step 3)

In Ubuntu-Gnome, simply pressing CTRL+L should clear the screen.

This also seems to also work well in Windows 10 and 7 and Mac OS X Sierra.

Definitive answer: import os and use os.path. do not import os.path directly.

From the documentation of the module itself:

>>> import os
>>> help(os.path)
...
Instead of importing this module directly, import os and refer to
this module as os.path.  The "os.path" name is an alias for this
module on Posix systems; on other systems (e.g. Mac, Windows),
os.path provides the same operations in a manner specific to that
platform, and is an alias to another module (e.g. macpath, ntpath).
...

Here is an implementation you can use (updated to use more up to date Java conventions - for:each loop, StringBuilder instead of StringBuffer):

public static String md5(final String s) {
    final String MD5 = "MD5";
    try {
        // Create MD5 Hash
        MessageDigest digest = java.security.MessageDigest
                .getInstance(MD5);
        digest.update(s.getBytes());
        byte messageDigest[] = digest.digest();

        // Create Hex String
        StringBuilder hexString = new StringBuilder();
        for (byte aMessageDigest : messageDigest) {
            String h = Integer.toHexString(0xFF & aMessageDigest);
            while (h.length() < 2)
                h = "0" + h;
            hexString.append(h);
        }
        return hexString.toString();

    } catch (NoSuchAlgorithmException e) {
        e.printStackTrace();
    }
    return "";
}

Although it is not recommended for systems that involve even the basic level of security (MD5 is considered broken and can be easily exploited), it is sometimes enough for basic tasks.

I know this is a bit late but what I did to our application is this. Hope this will help someone tho. But it works for me:

SELECT * FROM `landmarks` WHERE `landmark_name` OR `landmark_description` OR `landmark_address` LIKE '%keyword'
OR `landmark_name` OR `landmark_description` OR `landmark_address` LIKE 'keyword%' 
OR `landmark_name` OR `landmark_description` OR `landmark_address` LIKE '%keyword%'

a = input('Enter a binary number : ')
ar = [int(i) for  i in a]
ar  = ar[::-1]
res = []
for i in range(len(ar)):
    res.append(ar[i]*(2**i))
sum_res = sum(res)      
print('Decimal Number is : ',sum_res)

You will need have to download InternetExplorer driver executable on your system, download it from the source (http://code.google.com/p/selenium/downloads/list) after download unzip it and put on the place of somewhere in your computer. In my example, I will place it to D:\iexploredriver.exe

Then you have write below code in your eclipse main class

   System.setProperty("webdriver.ie.driver", "D:/iexploredriver.exe");
   WebDriver driver = new InternetExplorerDriver();

If you have headers in the markdown files, you can directly link them in the file.

Markdown Header -

## The Header

this will generate an implicit id #the-header (replace internal spaces with hyphens and make lowercase).

To navigate to this id, you can create the link like this:

[Link to Header](#the-header)

This is equivalent to:

<a href="#the-header">Link to Header</a>

Please note the reference's name is a lower-case #header.

In Spring you have a defined type: MediaType.APPLICATION_JSON_VALUE which is equivalent to application/json.

Are you using JTextArea's append(String) method to add additional text?

JTextArea txtArea = new JTextArea("Hello, World\n", 20, 20);
txtArea.append("Goodbye Cruel World\n");

Consider:

Function GetFolder() As String
    Dim fldr As FileDialog
    Dim sItem As String
    Set fldr = Application.FileDialog(msoFileDialogFolderPicker)
    With fldr
        .Title = "Select a Folder"
        .AllowMultiSelect = False
        .InitialFileName = Application.DefaultFilePath
        If .Show <> -1 Then GoTo NextCode
        sItem = .SelectedItems(1)
    End With
NextCode:
    GetFolder = sItem
    Set fldr = Nothing
End Function

This code was adapted from Ozgrid

and as jkf points out, from Mr Excel

The solution provided by Justin should work. To be sure making use of SelectedIndex property will also help.

ddlColor.DataSource = from p in db.ProductTypes
                      where p.ProductID == pID
                      orderby p.Color
                      select new { p.Color };

ddlColor.DataTextField = "Color";
ddlColor.DataBind();

ddlColor.Items.Insert(0, new ListItem("Select Color", ""); 
ddlColor.SelectedIndex = 0;

(copy-paste/adapted from https://stackoverflow.com/a/24048772/1733117).

First you can subclass urllib2.BaseHandler or urllib2.HTTPBasicAuthHandler, and implement http_request so that each request has the appropriate Authorization header.

import urllib2
import base64

class PreemptiveBasicAuthHandler(urllib2.HTTPBasicAuthHandler):
    '''Preemptive basic auth.

    Instead of waiting for a 403 to then retry with the credentials,
    send the credentials if the url is handled by the password manager.
    Note: please use realm=None when calling add_password.'''
    def http_request(self, req):
        url = req.get_full_url()
        realm = None
        # this is very similar to the code from retry_http_basic_auth()
        # but returns a request object.
        user, pw = self.passwd.find_user_password(realm, url)
        if pw:
            raw = "%s:%s" % (user, pw)
            auth = 'Basic %s' % base64.b64encode(raw).strip()
            req.add_unredirected_header(self.auth_header, auth)
        return req

    https_request = http_request

Then if you are lazy like me, install the handler globally

api_url = "http://api.foursquare.com/"
api_username = "johndoe"
api_password = "some-cryptic-value"

auth_handler = PreemptiveBasicAuthHandler()
auth_handler.add_password(
    realm=None, # default realm.
    uri=api_url,
    user=api_username,
    passwd=api_password)
opener = urllib2.build_opener(auth_handler)
urllib2.install_opener(opener)

who still facing the problem on linux and didnt find it on trash try this solution

https://github.com/Microsoft/vscode/issues/32078#issuecomment-434393058

find / -name "delete_file_name"

Revised Answer

If you're not calling this code from another program, an option is to skip PL/SQL and do it strictly in SQL using bind variables:

var myname varchar2(20);

exec :myname := 'Tom';

SELECT *
FROM   Customers
WHERE  Name = :myname;

In many tools (such as Toad and SQL Developer), omitting the var and exec statements will cause the program to prompt you for the value.

Original Answer

A big difference between T-SQL and PL/SQL is that Oracle doesn't let you implicitly return the result of a query. The result always has to be explicitly returned in some fashion. The simplest way is to use DBMS_OUTPUT (roughly equivalent to print) to output the variable:

DECLARE
   myname varchar2(20);
BEGIN
     myname := 'Tom';

     dbms_output.print_line(myname);
END;

This isn't terribly helpful if you're trying to return a result set, however. In that case, you'll either want to return a collection or a refcursor. However, using either of those solutions would require wrapping your code in a function or procedure and running the function/procedure from something that's capable of consuming the results. A function that worked in this way might look something like this:

CREATE FUNCTION my_function (myname in varchar2)
     my_refcursor out sys_refcursor
BEGIN
     open my_refcursor for
     SELECT *
     FROM   Customers
     WHERE  Name = myname;

     return my_refcursor;
END my_function;

You can use sp_lock (and sp_lock2), but in SQL Server 2005 onwards this is being deprecated in favour of querying sys.dm_tran_locks:

select  
    object_name(p.object_id) as TableName, 
    resource_type, resource_description
from
    sys.dm_tran_locks l
    join sys.partitions p on l.resource_associated_entity_id = p.hobt_id

Typescript: How to define type for a function callback used in a method parameter?

You can declare the callback as 1) function property or 2) method:

interface ParamFnProp {
    callback: (a: Animal) => void; // function property
}

interface ParamMethod {
    callback(a: Animal): void; // method
}

There is an important typing difference since TS 2.6:

You get stronger ("sound") types in --strict or --strictFunctionTypes mode, when a function property is declared. Let's take an example:

const animalCallback = (a: Animal): void => { } // Animal is the base type for Dog
const dogCallback = (d: Dog): void => { } 

// function property variant
const param11: ParamFnProp = { callback: dogCallback } // error: not assignable
const param12: ParamFnProp = { callback: animalCallback } // works

// method variant
const param2: ParamMethod = { callback: dogCallback } // now it works again ...

Technically spoken, methods are bivariant and function properties contravariant in their arguments under strictFunctionTypes. Methods are still checked more permissively (even if not sound) to be a bit more practical in combination with built-in types like Array.

Summary

• There is a type difference between function property and method declaration
• Choose a function property for stronger types, if possible

Playground sample code

I wrote this a long time ago (from years 1985-1992, with just a few tweaks since then), and just copy and paste the bits needed into each project.

You must call cfmakeraw on a tty obtained from tcgetattr. You cannot zero-out a struct termios, configure it, and then set the tty with tcsetattr. If you use the zero-out method, then you will experience unexplained intermittent failures, especially on the BSDs and OS X. "Unexplained intermittent failures" include hanging in read(3).

#include <errno.h>
#include <fcntl.h> 
#include <string.h>
#include <termios.h>
#include <unistd.h>

int
set_interface_attribs (int fd, int speed, int parity)
{
        struct termios tty;
        if (tcgetattr (fd, &tty) != 0)
        {
                error_message ("error %d from tcgetattr", errno);
                return -1;
        }

        cfsetospeed (&tty, speed);
        cfsetispeed (&tty, speed);

        tty.c_cflag = (tty.c_cflag & ~CSIZE) | CS8;     // 8-bit chars
        // disable IGNBRK for mismatched speed tests; otherwise receive break
        // as \000 chars
        tty.c_iflag &= ~IGNBRK;         // disable break processing
        tty.c_lflag = 0;                // no signaling chars, no echo,
                                        // no canonical processing
        tty.c_oflag = 0;                // no remapping, no delays
        tty.c_cc[VMIN]  = 0;            // read doesn't block
        tty.c_cc[VTIME] = 5;            // 0.5 seconds read timeout

        tty.c_iflag &= ~(IXON | IXOFF | IXANY); // shut off xon/xoff ctrl

        tty.c_cflag |= (CLOCAL | CREAD);// ignore modem controls,
                                        // enable reading
        tty.c_cflag &= ~(PARENB | PARODD);      // shut off parity
        tty.c_cflag |= parity;
        tty.c_cflag &= ~CSTOPB;
        tty.c_cflag &= ~CRTSCTS;

        if (tcsetattr (fd, TCSANOW, &tty) != 0)
        {
                error_message ("error %d from tcsetattr", errno);
                return -1;
        }
        return 0;
}

void
set_blocking (int fd, int should_block)
{
        struct termios tty;
        memset (&tty, 0, sizeof tty);
        if (tcgetattr (fd, &tty) != 0)
        {
                error_message ("error %d from tggetattr", errno);
                return;
        }

        tty.c_cc[VMIN]  = should_block ? 1 : 0;
        tty.c_cc[VTIME] = 5;            // 0.5 seconds read timeout

        if (tcsetattr (fd, TCSANOW, &tty) != 0)
                error_message ("error %d setting term attributes", errno);
}


...
char *portname = "/dev/ttyUSB1"
 ...
int fd = open (portname, O_RDWR | O_NOCTTY | O_SYNC);
if (fd < 0)
{
        error_message ("error %d opening %s: %s", errno, portname, strerror (errno));
        return;
}

set_interface_attribs (fd, B115200, 0);  // set speed to 115,200 bps, 8n1 (no parity)
set_blocking (fd, 0);                // set no blocking

write (fd, "hello!\n", 7);           // send 7 character greeting

usleep ((7 + 25) * 100);             // sleep enough to transmit the 7 plus
                                     // receive 25:  approx 100 uS per char transmit
char buf [100];
int n = read (fd, buf, sizeof buf);  // read up to 100 characters if ready to read

The values for speed are B115200, B230400, B9600, B19200, B38400, B57600, B1200, B2400, B4800, etc. The values for parity are 0 (meaning no parity), PARENB|PARODD (enable parity and use odd), PARENB (enable parity and use even), PARENB|PARODD|CMSPAR (mark parity), and PARENB|CMSPAR (space parity).

"Blocking" sets whether a read() on the port waits for the specified number of characters to arrive. Setting no blocking means that a read() returns however many characters are available without waiting for more, up to the buffer limit.

Addendum:

CMSPAR is needed only for choosing mark and space parity, which is uncommon. For most applications, it can be omitted. My header file /usr/include/bits/termios.h enables definition of CMSPAR only if the preprocessor symbol __USE_MISC is defined. That definition occurs (in features.h) with

#if defined _BSD_SOURCE || defined _SVID_SOURCE
 #define __USE_MISC     1
#endif

The introductory comments of <features.h> says:

/* These are defined by the user (or the compiler)
   to specify the desired environment:

...
   _BSD_SOURCE          ISO C, POSIX, and 4.3BSD things.
   _SVID_SOURCE         ISO C, POSIX, and SVID things.
...
 */

There is a simple hack to this:

Insert a hidden input field in the form with an entity which only occur in the character set the server your posting (or doing a GET) to accepts.

Example: If the form is located on a server serving ISO-8859-1 and the form will post to a server expecting UTF-8 insert something like this in the form:

<input name="iehack" type="hidden" value="&#9760;" />

IE will then "detect" that the form contains a UTF-8 character and use UTF-8 when you POST or GET. Strange, but it does work.

In Kotlin will be :

activity?.applicationContext?.let {
         it//<- you context
        }

A good and simple example for nested try/except could be the following:

import numpy as np

def divide(x, y):
    try:
        out = x/y
    except:
        try:
            out = np.inf * x / abs(x)
        except:
            out = np.nan
    finally:
        return out

Now try various combinations and you will get the correct result:

divide(15, 3)
# 5.0

divide(15, 0)
# inf

divide(-15, 0)
# -inf

divide(0, 0)
# nan

(Of course, we have NumPy, so we don't need to create this function.)

Here's one way:

df['name'].value_counts()[df['name'].value_counts() == df['name'].value_counts().max()]

which prints:

helen    2
alex     2
Name: name, dtype: int64

The way to run all of logrotate is:

logrotate -f /etc/logrotate.conf

that will run the primary logrotate file, which includes the other logrotate configurations as well

The code below will write the 4 unicode chars (represented by decimals) for the word "be" in Japanese. Yes, the verb "be" in Japanese has 4 chars! The value of characters is in decimal and it has been read into an array of String[] -- using split for instance. If you have Octal or Hex, parseInt take a radix as well.

// pseudo code
// 1. init the String[] containing the 4 unicodes in decima :: intsInStrs 
// 2. allocate the proper number of character pairs :: c2s
// 3. Using Integer.parseInt (... with radix or not) get the right int value
// 4. place it in the correct location of in the array of character pairs
// 5. convert c2s[] to String
// 6. print 

String[] intsInStrs = {"12354", "12426", "12414", "12377"}; // 1.
char [] c2s = new char [intsInStrs.length * 2];  // 2.  two chars per unicode

int ii = 0;
for (String intString : intsInStrs) {
    // 3. NB ii*2 because the 16 bit value of Unicode is written in 2 chars
    Character.toChars(Integer.parseInt(intsInStrs[ii]), c2s, ii * 2 ); // 3 + 4
    ++ii; // advance to the next char
}

String symbols = new String(c2s);  // 5.
System.out.println("\nLooooonger code point: " + symbols); // 6.
// I tested it in Eclipse and Java 7 and it works.  Enjoy

I would advise you to use pylibmc instead.

It can act as a drop-in replacement of python-memcache, but a lot faster(as it's written in C). And you can find handy documentation for it here.

And to the question, as pylibmc just acts as a drop-in replacement, you can still refer to documentations of pylibmc for your python-memcache programming.

For more detailed explanations - great documentation at that link. For example: It's easy, you only need to set up two loggers.

import sys
import logging

logger = logging.getLogger('')
logger.setLevel(logging.DEBUG)
fh = logging.FileHandler('my_log_info.log')
sh = logging.StreamHandler(sys.stdout)
formatter = logging.Formatter('[%(asctime)s] %(levelname)s [%(filename)s.%(funcName)s:%(lineno)d] %(message)s', datefmt='%a, %d %b %Y %H:%M:%S')
fh.setFormatter(formatter)
sh.setFormatter(formatter)
logger.addHandler(fh)
logger.addHandler(sh)

def hello_logger():
    logger.info("Hello info")
    logger.critical("Hello critical")
    logger.warning("Hello warning")
    logger.debug("Hello debug")

if __name__ == "__main__":
    print(hello_logger())

Output - terminal:

[Mon, 10 Aug 2020 12:44:25] INFO [TestLoger.py.hello_logger:15] Hello info
[Mon, 10 Aug 2020 12:44:25] CRITICAL [TestLoger.py.hello_logger:16] Hello critical
[Mon, 10 Aug 2020 12:44:25] WARNING [TestLoger.py.hello_logger:17] Hello warning
[Mon, 10 Aug 2020 12:44:25] DEBUG [TestLoger.py.hello_logger:18] Hello debug
None

Output - in file:

UPDATE: color terminal

Package:

pip install colorlog

Code:

import sys
import logging
import colorlog

logger = logging.getLogger('')
logger.setLevel(logging.DEBUG)
fh = logging.FileHandler('my_log_info.log')
sh = logging.StreamHandler(sys.stdout)
formatter = logging.Formatter('[%(asctime)s] %(levelname)s [%(filename)s.%(funcName)s:%(lineno)d] %(message)s', datefmt='%a, %d %b %Y %H:%M:%S')
fh.setFormatter(formatter)
sh.setFormatter(colorlog.ColoredFormatter('%(log_color)s [%(asctime)s] %(levelname)s [%(filename)s.%(funcName)s:%(lineno)d] %(message)s', datefmt='%a, %d %b %Y %H:%M:%S'))
logger.addHandler(fh)
logger.addHandler(sh)

def hello_logger():
    logger.info("Hello info")
    logger.critical("Hello critical")
    logger.warning("Hello warning")
    logger.debug("Hello debug")
    logger.error("Error message")

if __name__ == "__main__":
    hello_logger()

output:

Recommendation:

Complete logger configuration from INI file, which also includes setup for stdout and debug.log:

• handler_file
  • level=WARNING
• handler_screen
  • level=DEBUG

context.getPackageManager().getInstalledApplications(PackageManager.GET_META_DATA); Should return the list of all the installed apps but in android 11 it'll only return the list of system apps. To get the list of all the applications(system+user) we need to provide an additional permission to the application i.e

<uses-permission android:name"android.permission.QUERY_ALL_PACKAGES">

You cannot attach events before the elements you attach them to has loaded

This works -

Plain JS

DEMO

Recommended to use eventListener

// Should only be triggered on first page load
console.log('ho');

window.addEventListener("load", function() {
  document.getElementById('my-form').addEventListener("submit", function(e) {
    e.preventDefault(); // before the code
    /* do what you want with the form */

    // Should be triggered on form submit
    console.log('hi');
  })
});

<form id="my-form">
  <input type="text" name="in" value="some data" />
  <button type="submit">Go</button>
</form>

but if you do not need more than one listener you can use onload and onsubmit

// Should only be triggered on first page load
console.log('ho');

window.onload = function() {
  document.getElementById('my-form').onsubmit = function() {
    /* do what you want with the form */

    // Should be triggered on form submit
    console.log('hi');
    // You must return false to prevent the default form behavior
    return false;
  }
}

    <form id="my-form">
      <input type="text" name="in" value="some data" />
      <button type="submit">Go</button>
    </form>

jQuery

// Should only be triggered on first page load
console.log('ho');

$(function() {
  $('#my-form').on("submit", function(e) {
    e.preventDefault(); // cancel the actual submit

    /* do what you want with the form */

    // Should be triggered on form submit

    console.log('hi');
  });
});

<script src="https://cdnjs.cloudflare.com/ajax/libs/jquery/3.3.1/jquery.min.js"></script>
<form id="my-form">
  <input type="text" name="in" value="some data" />
  <button type="submit">Go</button>
</form>

I also met this problem while using Xshell to connect Linux server.

After seaching for methods, I find Xming + Xshell to solve image imshow problem with matplotlib.

If solutions aboved can't solve your problem, just try to download Xming under the condition you're using Xshell. Then set the attribute in Xshell, SSH->tunnel->X11transfer->choose X DISPLAY localhost:0.0

As mentioned above, ConstraintLayout offers maximum height for its children via:

app:layout_constraintHeight_max="300dp"
app:layout_constrainedHeight="true"

Besides, if maximum height for one ConstraintLayout's child is uncertain until App running, there still has a way to make this child automatically adapt a mutable height no matter where it was placed in the vertical chain.

For example, we need to show a bottom dialog with a mutable header TextView, a mutable ScrollView and a mutable footer TextView. The dialog's max height is 320dp,when total height not reach 320dp ScrollView act as wrap_content, when total height exceed ScrollView act as "maxHeight=320dp - header height - footer height".

We can achieve this just through xml layout file:

<?xml version="1.0" encoding="utf-8"?>
<android.support.constraint.ConstraintLayout xmlns:android="http://schemas.android.com/apk/res/android"
    xmlns:app="http://schemas.android.com/apk/res-auto"
    xmlns:tools="http://schemas.android.com/tools"
    android:layout_width="match_parent"
    android:layout_height="320dp">

    <TextView
        android:id="@+id/tv_header"
        android:layout_width="match_parent"
        android:layout_height="wrap_content"
        android:background="@color/black_10"
        android:gravity="center"
        android:padding="10dp"
        app:layout_constraintBottom_toTopOf="@id/scroll_view"
        app:layout_constraintStart_toStartOf="parent"
        app:layout_constraintTop_toTopOf="parent"
        app:layout_constraintVertical_bias="1"
        app:layout_constraintVertical_chainStyle="packed"
        tools:text="header" />

    <ScrollView
        android:id="@+id/scroll_view"
        android:layout_width="match_parent"
        android:layout_height="wrap_content"
        android:background="@color/black_30"
        app:layout_constrainedHeight="true"
        app:layout_constraintBottom_toTopOf="@id/tv_footer"
        app:layout_constraintHeight_max="300dp"
        app:layout_constraintStart_toStartOf="parent"
        app:layout_constraintTop_toBottomOf="@id/tv_header">

        <LinearLayout
            android:id="@+id/ll_container"
            android:layout_width="match_parent"
            android:layout_height="wrap_content"
            android:orientation="vertical">

            <TextView
                android:id="@+id/tv_sub1"
                android:layout_width="match_parent"
                android:layout_height="160dp"
                android:gravity="center"
                android:textColor="@color/orange_light"
                tools:text="sub1" />

            <TextView
                android:id="@+id/tv_sub2"
                android:layout_width="match_parent"
                android:layout_height="160dp"
                android:gravity="center"
                android:textColor="@color/orange_light"
                tools:text="sub2" />

        </LinearLayout>
    </ScrollView>

    <TextView
        android:id="@+id/tv_footer"
        android:layout_width="match_parent"
        android:layout_height="wrap_content"
        android:background="@color/black_50"
        android:gravity="center"
        android:padding="10dp"
        app:layout_constraintBottom_toBottomOf="parent"
        app:layout_constraintStart_toStartOf="parent"
        app:layout_constraintTop_toBottomOf="@id/scroll_view"
        tools:text="footer" />
</android.support.constraint.ConstraintLayout>

Most import code is short:

app:layout_constraintVertical_bias="1"
app:layout_constraintVertical_chainStyle="packed"

app:layout_constrainedHeight="true"

Horizontal maxWidth usage is quite the same.

Here's a cool way to do custom wildcard expression validations in a form (from: Advanced form validation with AngularJS and filters):

<form novalidate="">  
   <input type="text" id="name" name="name" ng-model="newPerson.name"
      ensure-expression="(persons | filter:{name: newPerson.name}:true).length !== 1">
   <!-- or in your case:-->
   <input type="text" id="fruitName" name="fruitName" ng-model="data.fruitName"
      ensure-expression="(blacklist | filter:{fruitName: data.fruitName}:true).length !== 1">
</form>

app.directive('ensureExpression', ['$http', '$parse', function($http, $parse) {
    return {
        require: 'ngModel',
        link: function(scope, ele, attrs, ngModelController) {
            scope.$watch(attrs.ngModel, function(value) {
                var booleanResult = $parse(attrs.ensureExpression)(scope);
                ngModelController.$setValidity('expression', booleanResult);
            });
        }
    };
}]);

jsFiddle demo (supports expression naming and multiple expressions)

It's similar to ui-validate, but you don't need a scope specific validation function (this works generically) and ofcourse you don't need ui.utils this way.

I just found this when googling to solve the same problem, and had to make a minor change to the solution to make it work in my situation, as I had 2 similar substrings, "Sun" and "Sunstruck" to search for. The offered solution was locating the wrong entry when searching for "Sun". Data in column B

I added another column C, formulaes C1=" "&B1&" " and changed the search to =COUNTIF(B1:B10,"* "&A1&" *")>0, the extra column to allow finding the first of last entry in the concatenated string.

public class UploadToServer extends Activity {

TextView messageText;
Button uploadButton;
int serverResponseCode = 0;
ProgressDialog dialog = null;

String upLoadServerUri = null;

/********** File Path *************/
final String uploadFilePath = "/mnt/sdcard/";
final String uploadFileName = "Quotes.jpg";

@Override
public void onCreate(Bundle savedInstanceState) {

    super.onCreate(savedInstanceState);
    setContentView(R.layout.activity_upload_to_server);

    uploadButton = (Button) findViewById(R.id.uploadButton);
    messageText = (TextView) findViewById(R.id.messageText);

    messageText.setText("Uploading file path :- '/mnt/sdcard/"
            + uploadFileName + "'");

    /************* Php script path ****************/
    upLoadServerUri = "http://192.1.1.11/hhhh/UploadToServer.php";

    uploadButton.setOnClickListener(new OnClickListener() {
        @Override
        public void onClick(View v) {

            dialog = ProgressDialog.show(UploadToServer.this, "",
                    "Uploading file...", true);

            new Thread(new Runnable() {
                public void run() {
                    runOnUiThread(new Runnable() {
                        public void run() {
                            messageText.setText("uploading started.....");
                        }
                    });

                    uploadFile(uploadFilePath + "" + uploadFileName);

                }
            }).start();
        }
    });
}

public int uploadFile(String sourceFileUri) {

    String fileName = sourceFileUri;

    HttpURLConnection connection = null;
    DataOutputStream dos = null;
    String lineEnd = "\r\n";
    String twoHyphens = "--";
    String boundary = "*****";
    int bytesRead, bytesAvailable, bufferSize;
    byte[] buffer;
    int maxBufferSize = 1 * 1024 * 1024;
    File sourceFile = new File(sourceFileUri);

    if (!sourceFile.isFile()) {

        dialog.dismiss();

        Log.e("uploadFile", "Source File not exist :" + uploadFilePath + ""
                + uploadFileName);

        runOnUiThread(new Runnable() {
            public void run() {
                messageText.setText("Source File not exist :"
                        + uploadFilePath + "" + uploadFileName);
            }
        });

        return 0;

    } else {
        try {

            // open a URL connection to the Servlet
            FileInputStream fileInputStream = new FileInputStream(
                    sourceFile);
            URL url = new URL(upLoadServerUri);

            // Open a HTTP connection to the URL
            connection = (HttpURLConnection) url.openConnection();
            connection.setDoInput(true); // Allow Inputs
            connection.setDoOutput(true); // Allow Outputs
            connection.setUseCaches(false); // Don't use a Cached Copy
            connection.setRequestMethod("POST");
            connection.setRequestProperty("Connection", "Keep-Alive");
            connection.setRequestProperty("ENCTYPE", "multipart/form-data");
            connection.setRequestProperty("Content-Type",
                    "multipart/form-data;boundary=" + boundary);
            connection.setRequestProperty("uploaded_file", fileName);

            dos = new DataOutputStream(connection.getOutputStream());

            dos.writeBytes(twoHyphens + boundary + lineEnd);
            // dos.writeBytes("Content-Disposition: form-data; name=\"uploaded_file\";filename=\""
            // + fileName + "\"" + lineEnd);
            dos.writeBytes("Content-Disposition: post-data; name=uploadedfile;filename="
                    + URLEncoder.encode(fileName, "UTF-8") + lineEnd);

            dos.writeBytes(lineEnd);

            // create a buffer of maximum size
            bytesAvailable = fileInputStream.available();

            bufferSize = Math.min(bytesAvailable, maxBufferSize);
            buffer = new byte[bufferSize];

            // read file and write it into form...
            bytesRead = fileInputStream.read(buffer, 0, bufferSize);

            while (bytesRead > 0) {

                dos.write(buffer, 0, bufferSize);
                bytesAvailable = fileInputStream.available();
                bufferSize = Math.min(bytesAvailable, maxBufferSize);
                bytesRead = fileInputStream.read(buffer, 0, bufferSize);

            }

            // send multipart form data necesssary after file data...
            dos.writeBytes(lineEnd);
            dos.writeBytes(twoHyphens + boundary + twoHyphens + lineEnd);

            // Responses from the server (code and message)
            int serverResponseCode = connection.getResponseCode();
            String serverResponseMessage = connection.getResponseMessage();

            Log.i("uploadFile", "HTTP Response is : "
                    + serverResponseMessage + ": " + serverResponseCode);

            if (serverResponseCode == 200) {

                runOnUiThread(new Runnable() {
                    public void run() {

                        String msg = "File Upload Completed.\n\n See uploaded file here : \n\n"
                                + " http://www.androidexample.com/media/uploads/"
                                + uploadFileName;

                        messageText.setText(msg);
                        Toast.makeText(UploadToServer.this,
                                "File Upload Complete.", Toast.LENGTH_SHORT)
                                .show();
                    }
                });
            }

            // close the streams //
            fileInputStream.close();
            dos.flush();
            dos.close();

        } catch (MalformedURLException ex) {

            dialog.dismiss();
            ex.printStackTrace();

            runOnUiThread(new Runnable() {
                public void run() {
                    messageText
                            .setText("MalformedURLException Exception : check script url.");
                    Toast.makeText(UploadToServer.this,
                            "MalformedURLException", Toast.LENGTH_SHORT)
                            .show();
                }
            });

            Log.e("Upload file to server", "error: " + ex.getMessage(), ex);
        } catch (Exception e) {

            dialog.dismiss();
            e.printStackTrace();

            runOnUiThread(new Runnable() {
                public void run() {
                    messageText.setText("Got Exception : see logcat ");
                    Toast.makeText(UploadToServer.this,
                            "Got Exception : see logcat ",
                            Toast.LENGTH_SHORT).show();
                }
            });
            Log.e("Upload file to server Exception",
                    "Exception : " + e.getMessage(), e);
        }
        dialog.dismiss();
        return serverResponseCode;

    } // End else block
}

PHP FILE

<?php
$target_path  = "./Upload/";
$target_path = $target_path . basename( $_FILES['uploadedfile']['name']);
if(move_uploaded_file($_FILES['uploadedfile']['tmp_name'], $target_path)) {
echo "The file ".  basename( $_FILES['uploadedfile']['name']).
" has been uploaded";
} else{
 echo "There was an error uploading the file, please try again!";
}
?>

Note that the native Array.forEach method is now widely supported.

Swift 4 & 3

Creating Data object from String object has been changed in Swift 3. Correct version now is:

let data = "any string".data(using: .utf8)

Try writing all the errors to a file.

error_reporting(-1); // reports all errors
ini_set("display_errors", "1"); // shows all errors
ini_set("log_errors", 1);
ini_set("error_log", "/tmp/php-error.log");

Something like that.

There is also LibHaru

http://libharu.org/wiki/Main_Page

If you want to display the menu up, just add the class "dropup"
and remove the class "dropdown" if exists from the same div.

<div class="btn-group dropup">

Here is a good eplanation: ASP.NET MVC – Multiple buttons in the same form

In 2 words:
you may analize value of submitted button in yout action
or
make separate actions with your version of ActionMethodSelectorAttribute (which I personaly prefer and suggest).

Making strings immutable has many advantages. It provides automatic thread safety, and makes strings behave like an intrinsic type in a simple, effective manner. It also allows for extra efficiencies at runtime (such as allowing effective string interning to reduce resource usage), and has huge security advantages, since it's impossible for an third party API call to change your strings.

StringBuilder was added in order to address the one major disadvantage of immutable strings - runtime construction of immutable types causes a lot of GC pressure and is inherently slow. By making an explicit, mutable class to handle this, this issue is addressed without adding unneeded complication to the string class.

First Option:

OPEN package.json and add "--port port-no" in "serve" section.

Just like below, I have done it.

{
  "name": "app-name",
  "version": "0.1.0",
  "private": true,
  "scripts": {
    "serve": "vue-cli-service serve --port 8090",
    "build": "vue-cli-service build",
    "lint": "vue-cli-service lint"
}

Second Option: If You want through command prompt

npm run serve --port 8090

Look at this answer: https://css-tricks.com/the-trick-to-viewport-units-on-mobile/

// First we get the viewport height and we multiple it by 1% to get a value for a vh unit_x000D_
let vh = window.innerHeight * 0.01;_x000D_
// Then we set the value in the --vh custom property to the root of the document_x000D_
document.documentElement.style.setProperty('--vh', `${vh}px`);_x000D_
_x000D_
// We listen to the resize event_x000D_
window.addEventListener('resize', () => {_x000D_
  // We execute the same script as before_x000D_
  let vh = window.innerHeight * 0.01;_x000D_
  document.documentElement.style.setProperty('--vh', `${vh}px`);_x000D_
});

body {_x000D_
  background-color: #333;_x000D_
}_x000D_
_x000D_
.module {_x000D_
  height: 100vh; /* Use vh as a fallback for browsers that do not support Custom Properties */_x000D_
  height: calc(var(--vh, 1vh) * 100);_x000D_
  margin: 0 auto;_x000D_
  max-width: 30%;_x000D_
}_x000D_
_x000D_
.module__item {_x000D_
  align-items: center;_x000D_
  display: flex;_x000D_
  height: 20%;_x000D_
  justify-content: center;_x000D_
}_x000D_
_x000D_
.module__item:nth-child(odd) {_x000D_
  background-color: #fff;_x000D_
  color: #F73859;_x000D_
}_x000D_
_x000D_
.module__item:nth-child(even) {_x000D_
  background-color: #F73859;_x000D_
  color: #F1D08A;_x000D_
}

<div class="module">_x000D_
  <div class="module__item">20%</div>_x000D_
  <div class="module__item">40%</div>_x000D_
  <div class="module__item">60%</div>_x000D_
  <div class="module__item">80%</div>_x000D_
  <div class="module__item">100%</div>_x000D_
</div>

You might changed your drive-letter: once u had installed eclipse on D:\, after windows reinstall the drive-letter is now E:\ (for example).

look into eclipse.ini in your eclipse folder, there are some lines where the drive-letter is still D:\

(MyColours)Enum.Parse(typeof(MyColours), "red", true); // MyColours.Red
(int)((MyColours)Enum.Parse(typeof(MyColours), "red", true)); // 0

In my situation, --prefix= failed to update the path correctly under some warnings or failures. please see the below link for the answer. https://stackoverflow.com/a/50208379/1283198

For-loops:

For-loop in C:

for(int x = 0; x<=3; x++)
{
    //Do something!
}

The same loop in 8086 assembler:

        xor cx,cx   ; cx-register is the counter, set to 0
loop1   nop         ; Whatever you wanna do goes here, should not change cx
        inc cx      ; Increment
        cmp cx,3    ; Compare cx to the limit
        jle loop1   ; Loop while less or equal

That is the loop if you need to access your index (cx). If you just wanna to something 0-3=4 times but you do not need the index, this would be easier:

        mov cx,4    ; 4 iterations
loop1   nop         ; Whatever you wanna do goes here, should not change cx
        loop loop1  ; loop instruction decrements cx and jumps to label if not 0

If you just want to perform a very simple instruction a constant amount of times, you could also use an assembler-directive which will just hardcore that instruction

times 4 nop

Do-while-loops

Do-while-loop in C:

int x=1;
do{
    //Do something!
}
while(x==1)

The same loop in assembler:

        mov ax,1
loop1   nop         ; Whatever you wanna do goes here
        cmp ax,1    ; Check wether cx is 1
        je loop1    ; And loop if equal

While-loops

While-loop in C:

while(x==1){
    //Do something
}

The same loop in assembler:

        jmp loop1   ; Jump to condition first
cloop1  nop         ; Execute the content of the loop
loop1   cmp ax,1    ; Check the condition
        je cloop1   ; Jump to content of the loop if met

For the for-loops you should take the cx-register because it is pretty much standard. For the other loop conditions you can take a register of your liking. Of course replace the no-operation instruction with all the instructions you wanna perform in the loop.

Update Swift 4.2

Here, for instance, we encrypt a string to base64encoded string. And then we decrypt the same to a readable string. (That would be same as our input string).

In my case, I use this to encrypt a string and embed that to QR Code. Then another party scan that and decrypt the same. So intermediate won't understand the QR codes.

Step 1: Encrypt a string "Encrypt My Message 123"

Step 2: Encrypted base64Encoded string : +yvNjiD7F9/JKmqHTc/Mjg== (The same printed on QR code)

Step 3: Scan and decrypt the string "+yvNjiD7F9/JKmqHTc/Mjg=="

Step 4: It comes final result - "Encrypt My Message 123"

Functions for Encrypt & Decrypt

func encryption(stringToEncrypt: String) -> String{
    let key = "MySecretPKey"
    //let iv = "92c9d2c07a9f2e0a"
    let data = stringToEncrypt.data(using: .utf8)
    let keyD = key.data(using: .utf8)
    let encr = (data as NSData?)!.aes128EncryptedData(withKey: keyD)
    let base64String: String = (encr as NSData?)!.base64EncodedString(options: NSData.Base64EncodingOptions(rawValue: 0))
    print(base64String)
    return base64String
}

func decryption(encryptedString:String) -> String{
    let key = "MySecretPKey"
    //let iv = "92c9d2c07a9f2e0a"
    let keyD = key.data(using: .utf8)
    let decrpStr = NSData(base64Encoded: encryptedString, options: NSData.Base64DecodingOptions(rawValue: 0))
    let dec = (decrpStr)!.aes128DecryptedData(withKey: keyD)
    let backToString = String(data: dec!, encoding: String.Encoding.utf8)
    print(backToString!)
    return backToString!
}

Usage:

    let enc = encryption(stringToEncrypt: "Encrypt My Message 123")
    let decryptedString = decryption(encryptedString: enc)
    print(decryptedString) 

Classes for supporting AES encrypting functions, these are written in Objective-C. So for swift, you need to use bridge header to support these.

Class Name: NSData+AES.h

#import <Foundation/Foundation.h>

@interface NSData (AES)

- (NSData *)AES128EncryptedDataWithKey:(NSData *)key;
- (NSData *)AES128DecryptedDataWithKey:(NSData *)key;
- (NSData *)AES128EncryptedDataWithKey:(NSData *)key iv:(NSData *)iv;
- (NSData *)AES128DecryptedDataWithKey:(NSData *)key iv:(NSData *)iv;

@end

Class Name: NSData+AES.m

#import "NSData+AES.h"
#import <CommonCrypto/CommonCryptor.h>

@implementation NSData (AES)

- (NSData *)AES128EncryptedDataWithKey:(NSData *)key
{
    return [self AES128EncryptedDataWithKey:key iv:nil];
}

- (NSData *)AES128DecryptedDataWithKey:(NSData *)key
{
    return [self AES128DecryptedDataWithKey:key iv:nil];
}

- (NSData *)AES128EncryptedDataWithKey:(NSData *)key iv:(NSData *)iv
{
    return [self AES128Operation:kCCEncrypt key:key iv:iv];
}

- (NSData *)AES128DecryptedDataWithKey:(NSData *)key iv:(NSData *)iv
{
    return [self AES128Operation:kCCDecrypt key:key iv:iv];
}

- (NSData *)AES128Operation:(CCOperation)operation key:(NSData *)key iv:(NSData *)iv
{

    NSUInteger dataLength = [self length];
    size_t bufferSize = dataLength + kCCBlockSizeAES128;
    void *buffer = malloc(bufferSize);

    size_t numBytesEncrypted = 0;
    CCCryptorStatus cryptStatus = CCCrypt(operation,
                                          kCCAlgorithmAES128,
                                          kCCOptionPKCS7Padding | kCCOptionECBMode,
                                          key.bytes,
                                          kCCBlockSizeAES128,
                                          iv.bytes,
                                          [self bytes],
                                          dataLength,
                                          buffer,
                                          bufferSize,
                                          &numBytesEncrypted);
    if (cryptStatus == kCCSuccess) {
        return [NSData dataWithBytesNoCopy:buffer length:numBytesEncrypted];
    }
    free(buffer);
    return nil;
}

@end

I hope that helps.

Thanks!!!

On your server-side code, replace the new lines (\n) with <br/>.

If you're using PHP, you can use nl2br()

I know this is an older question, but I felt the answer from t3chb0t led me to the best path and felt like sharing. You don't even need to go so far as implementing all the formatter's methods. I did the following for the content-type "application/vnd.api+json" being returned by an API I was using:

public class VndApiJsonMediaTypeFormatter : JsonMediaTypeFormatter
{
    public VndApiJsonMediaTypeFormatter()
    {
        SupportedMediaTypes.Add(new MediaTypeHeaderValue("application/vnd.api+json"));
    }
}

Which can be used simply like the following:

HttpClient httpClient = new HttpClient("http://api.someaddress.com/");
HttpResponseMessage response = await httpClient.GetAsync("person");

List<System.Net.Http.Formatting.MediaTypeFormatter> formatters = new List<System.Net.Http.Formatting.MediaTypeFormatter>();
formatters.Add(new System.Net.Http.Formatting.JsonMediaTypeFormatter());
formatters.Add(new VndApiJsonMediaTypeFormatter());

var responseObject = await response.Content.ReadAsAsync<Person>(formatters);

Super simple and works exactly as I expected.

You're not allowed to change the contents of a string constant, which is what the first p points to. The second p is an array initialized with a string constant, and you can change its contents.

Maybe this will help

http://www.math.utah.edu/docs/info/gawk_5.html

awk '$3 ~ /snow|snowman/' dummy_file

My reason was having same library with different snapshot versions in WEB-INF/lib:

some-lib-3.14.0.143-SNAPSHOT.jar
some-lib-3.14.0.143-20200708.101204-1.jar

To fix the issue remove redundant copy.

If Khanh TO's solution caused UI issues for you (like it did for me) try using $timeout to not update the attribute until it has been unchanged for 500ms.

var oldWidth = window.innerWidth;
$(window).on('resize.doResize', function () {
    var newWidth = window.innerWidth,
        updateStuffTimer;

    if (newWidth !== oldWidth) {
        $timeout.cancel(updateStuffTimer);
    }

    updateStuffTimer = $timeout(function() {
         updateStuff(newWidth); // Update the attribute based on window.innerWidth
    }, 500);
});

$scope.$on('$destroy',function (){
    $(window).off('resize.doResize'); // remove the handler added earlier
});

Reference: https://gist.github.com/tommaitland/7579618

CREATE TABLE dbo.tblUsers
(
    ID INT IDENTITY(1,1) NOT NULL PRIMARY KEY CLUSTERED,
    UserID AS 'UID' + RIGHT('00000000' + CAST(ID AS VARCHAR(8)), 8) PERSISTED, 
    [Name] VARCHAR(50) NOT NULL,
)

marc_s's Answer Snap

While you can use initializers like the other answers, the conventional Rails 4.1+ way is to use the config/secrets.yml. The reason for the Rails team to introduce this is beyond the scope of this answer but the TL;DR is that secret_token.rb conflates configuration and code as well as being a security risk since the token is checked into source control history and the only system that needs to know the production secret token is the production infrastructure.

You should add this file to .gitignore much like you wouldn't add config/database.yml to source control either.

Referencing Heroku's own code for setting up config/database.yml from DATABASE_URL in their Buildpack for Ruby, I ended up forking their repo and modified it to create config/secrets.yml from SECRETS_KEY_BASE environment variable.

Since this feature was introduced in Rails 4.1, I felt it was appropriate to edit ./lib/language_pack/rails41.rb and add this functionality.

The following is the snippet from the modified buildpack I created at my company:

class LanguagePack::Rails41 < LanguagePack::Rails4

  # ...

  def compile
    instrument "rails41.compile" do
      super
      allow_git do
        create_secrets_yml
      end
    end
  end

  # ...

  # writes ERB based secrets.yml for Rails 4.1+
  def create_secrets_yml
    instrument 'ruby.create_secrets_yml' do
      log("create_secrets_yml") do
        return unless File.directory?("config")
        topic("Writing config/secrets.yml to read from SECRET_KEY_BASE")
        File.open("config/secrets.yml", "w") do |file|
          file.puts <<-SECRETS_YML
<%
raise "No RACK_ENV or RAILS_ENV found" unless ENV["RAILS_ENV"] || ENV["RACK_ENV"]
%>

<%= ENV["RAILS_ENV"] || ENV["RACK_ENV"] %>:
  secret_key_base: <%= ENV["SECRET_KEY_BASE"] %>
          SECRETS_YML
        end
      end
    end
  end

  # ...

end

You can of course extend this code to add other secrets (e.g. third party API keys, etc.) to be read off of your environment variable:

...
<%= ENV["RAILS_ENV"] || ENV["RACK_ENV"] %>:
  secret_key_base: <%= ENV["SECRET_KEY_BASE"] %>
  third_party_api_key: <%= ENV["THIRD_PARTY_API"] %>

This way, you can access this secret in a very standard way:

Rails.application.secrets.third_party_api_key

Before redeploying your app, be sure to set your environment variable first:

Then add your modified buildpack (or you're more than welcome to link to mine) to your Heroku app (see Heroku's documentation) and redeploy your app.

The buildpack will automatically create your config/secrets.yml from your environment variable as part of the dyno build process every time you git push to Heroku.

EDIT: Heroku's own documentation suggests creating config/secrets.yml to read from the environment variable but this implies you should check this file into source control. In my case, this doesn't work well since I have hardcoded secrets for development and testing environments that I'd rather not check in.

if [[ "$variable" == "" ]] ...

You can use following to achieve desired functionality

"%d:%d:d" % (hours, minutes, seconds)

I use let to test my HTTP 404 responses in my API specs using contexts.

To create the resource, I use let!. But to store the resource identifier, I use let. Take a look how it looks like:

let!(:country)   { create(:country) }
let(:country_id) { country.id }
before           { get "api/countries/#{country_id}" }

it 'responds with HTTP 200' { should respond_with(200) }

context 'when the country does not exist' do
  let(:country_id) { -1 }
  it 'responds with HTTP 404' { should respond_with(404) }
end

That keeps the specs clean and readable.

You can use any of the below code to get the controller name

@HttpContext.Current.Request.RequestContext.RouteData.Values["controller"].ToString();

If you are using MVC 3 you can use

@ViewContext.Controller.ValueProvider.GetValue("controller").RawValue

To Install cURL 7.49.0 on Ubuntu 16.04 and Derivatives

wget http://curl.haxx.se/download/curl-7.49.0.tar.gz
tar -xvf curl-7.49.0.tar.gz
cd curl-7.49.0/
./configure
make
sudo make install

For Windows machine go to command prompt and type.

pip -V 

My understanding is this:

• A computer program is a set of instructions that can be executed on a computer.
• An application is software that directly helps a user perform tasks.
• The two intersect, but are not synonymous. A program with a user-interface is an application, but many programs are not applications.

I struggled with the same problem where I was trying to execute an update query like the same as you did-

@Modifying
@Transactional
@Query(value = "UPDATE SAMPLE_TABLE st SET st.status=:flag WHERE se.referenceNo in :ids")
public int updateStatus(@Param("flag")String flag, @Param("ids")List<String> references);

This will work if you have put @EnableTransactionManagement annotation on the main class. Spring 3.1 introduces the @EnableTransactionManagement annotation to be used in on @Configuration classes and enable transactional support.

//generate a list of alphabet using csharp
//this recurcive function will return you
//a string with position of passed int
//say if pass 0 will return A ,1-B,2-C,.....,26-AA,27-AB,....,701-ZZ,702-AAA,703-AAB,...

static string CharacterIncrement(int colCount)
{
    int TempCount = 0;
    string returnCharCount = string.Empty;

    if (colCount <= 25)
    {
        TempCount = colCount;
        char CharCount = Convert.ToChar((Convert.ToInt32('A') + TempCount));
        returnCharCount += CharCount;
        return returnCharCount;
    }
    else
    {
        var rev = 0;

        while (colCount >= 26)
        {
            colCount = colCount - 26;
            rev++;
        }

        returnCharCount += CharacterIncrement(rev-1);
        returnCharCount += CharacterIncrement(colCount);
        return returnCharCount;
    }
}

//--------this loop call this function---------//
int i = 0;
while (i <>
    {
        string CharCount = string.Empty;
        CharCount = CharacterIncrement(i);

        i++;
    }

The way I use it is

# Have to assign back to dataframe (because it is a new copy)
df = df.some_operation(inplace=False) 

Or

# No need to assign back to dataframe (because it is on the same copy)
df.some_operation(inplace=True)

CONCLUSION:

 if inplace is False
      Assign to a new variable;
 else
      No need to assign

To go the other way (hex to string), you can use

public String hexToString(String hex) {
    return new String(new BigInteger(hex, 16).toByteArray());
}

I think that since return validateView(); will return a value (to the click event?), your second call ShowDiv1(); will not get called.

You can always wrap multiple function calls in another function, i.e.

<asp:LinkButton OnClientClick="return display();">

function display() {
   if(validateView() && ShowDiv1()) return true;
}

You also might try:

<asp:LinkButton OnClientClick="return (validateView() && ShowDiv1());">

Though I have no idea if that would throw an exception.

You can also install json-py from here http://sourceforge.net/projects/json-py/

you might also consider avoiding the core PHP module altogether.

It is quite common to use the guzzle json tools as a library in PHP apps these days. If your app is a composer app, it is trivial to include them as a part of a composer build. The guzzle tool, as a library, would be a turnkey replacement for the json tool, if you tell PHP to autoinclude the tool.

http://docs.guzzlephp.org/en/stable/search.html?q=json_encode#

http://apigen.juzna.cz/doc/guzzle/guzzle/function-GuzzleHttp.json_decode.html

A similar looking answer was downvoted. But I think I can justify what I'm suggesting here for limited cases.

While it's true that an observable doesn't have a current value, very often it will have an immediately available value. For example with redux / flux / akita stores you may request data from a central store, based on a number of observables and that value will generally be immediately available.

If this is the case then when you subscribe, the value will come back immediately.

So let's say you had a call to a service, and on completion you want to get the latest value of something from your store, that potentially might not emit:

You might try to do this (and you should as much as possible keep things 'inside pipes'):

 serviceCallResponse$.pipe(withLatestFrom(store$.select(x => x.customer)))
                     .subscribe(([ serviceCallResponse, customer] => {

                        // we have serviceCallResponse and customer 
                     });

The problem with this is that it will block until the secondary observable emits a value, which potentially could be never.

I found myself recently needing to evaluate an observable only if a value was immediately available, and more importantly I needed to be able to detect if it wasn't. I ended up doing this:

 serviceCallResponse$.pipe()
                     .subscribe(serviceCallResponse => {

                        // immediately try to subscribe to get the 'available' value
                        // note: immediately unsubscribe afterward to 'cancel' if needed
                        let customer = undefined;

                        // whatever the secondary observable is
                        const secondary$ = store$.select(x => x.customer);

                        // subscribe to it, and assign to closure scope
                        sub = secondary$.pipe(take(1)).subscribe(_customer => customer = _customer);
                        sub.unsubscribe();

                        // if there's a delay or customer isn't available the value won't have been set before we get here
                        if (customer === undefined) 
                        {
                           // handle, or ignore as needed
                           return throwError('Customer was not immediately available');
                        }
                     });

Note that for all of the above I'm using subscribe to get the value (as @Ben discusses). Not using a .value property, even if I had a BehaviorSubject.

this regex can help you, you should get the first group by \1 or whatever method you have in your language.

href="([^"]*)

example:

<a href="http://www.amghezi.com">amgheziName</a>

result:

http://www.amghezi.com

That should work, I'd put brackets around [Date] as it's a reserved keyword.

Here is how to integrate CSS star rating into an HTML form without using javascript (only html and css):

CSS:

.txt-center {
    text-align: center;
}
.hide {
    display: none;
}

.clear {
    float: none;
    clear: both;
}

.rating {
    width: 90px;
    unicode-bidi: bidi-override;
    direction: rtl;
    text-align: center;
    position: relative;
}

.rating > label {
    float: right;
    display: inline;
    padding: 0;
    margin: 0;
    position: relative;
    width: 1.1em;
    cursor: pointer;
    color: #000;
}

.rating > label:hover,
.rating > label:hover ~ label,
.rating > input.radio-btn:checked ~ label {
    color: transparent;
}

.rating > label:hover:before,
.rating > label:hover ~ label:before,
.rating > input.radio-btn:checked ~ label:before,
.rating > input.radio-btn:checked ~ label:before {
    content: "\2605";
    position: absolute;
    left: 0;
    color: #FFD700;
}

HTML:

<div class="txt-center">
    <form>
        <div class="rating">
            <input id="star5" name="star" type="radio" value="5" class="radio-btn hide" />
            <label for="star5">?</label>
            <input id="star4" name="star" type="radio" value="4" class="radio-btn hide" />
            <label for="star4">?</label>
            <input id="star3" name="star" type="radio" value="3" class="radio-btn hide" />
            <label for="star3">?</label>
            <input id="star2" name="star" type="radio" value="2" class="radio-btn hide" />
            <label for="star2">?</label>
            <input id="star1" name="star" type="radio" value="1" class="radio-btn hide" />
            <label for="star1">?</label>
            <div class="clear"></div>
        </div>
    </form>
</div>

Please check the demo

If you want to check the display value, https://stackoverflow.com/a/1189281/5622596 already posted the answer.

However if instead of checking whether an element has a style of style="display:none" you want to know if that element is visible. Then use .is(":visible")

For example: $('#idDetails').is(":visible");

This will be true if it is visible & false if it is not.

Javascript is a single threaded language, you don't want to block your whole server! Async code eliminates, race conditions by making dependencies explicit.

Learn to love asynchronous code!

Have a look at promises for asynchronous code without creating a pyramid of callback hell. I recommend the promiseQ library for node.js

httpGet(url.parse("http://example.org/")).then(function (res) {
    console.log(res.statusCode);  // maybe 302
    return httpGet(url.parse(res.headers["location"]));
}).then(function (res) {
    console.log(res.statusCode);  // maybe 200
});

http://howtonode.org/promises

EDIT: this is by far my most controversial answer, node now has yield keyword, which allows you to treat async code as if it were sychronous. http://blog.alexmaccaw.com/how-yield-will-transform-node

Like already said, the -cp is just for telling the jvm in the command line which class to use for the main thread and where it can find the libraries (define classpath). In -jar it expects the class-path and main-class to be defined in the jar file manifest. So other is for defining things in command line while other finding them inside the jar manifest. There is no difference in performance. You can't use them at the same time, -jar will override the -cp.

Though even if you use -cp, it will still check the manifest file. So you can define some of the class-paths in the manifest and some in the command line. This is particularly useful when you have a dependency on some 3rd party jar, which you might not provide with your build or don't want to provide (expecting it to be found already in the system where it's to be installed for example). So you can use it to provide external jars. It's location may vary between systems or it may even have a different version on different system (but having the same interfaces). This way you can build the app with other version and add the actual 3rd party dependency to class-path on the command line when running it on different systems.

Collected ideas from multiple C++ sources and put it into a nice, still quite simple example for getters/setters in C++:

class Canvas { public:
    void resize() {
        cout << "resize to " << width << " " << height << endl;
    }

    Canvas(int w, int h) : width(*this), height(*this) {
        cout << "new canvas " << w << " " << h << endl;
        width.value = w;
        height.value = h;
    }

    class Width { public:
        Canvas& canvas;
        int value;
        Width(Canvas& canvas): canvas(canvas) {}
        int & operator = (const int &i) {
            value = i;
            canvas.resize();
            return value;
        }
        operator int () const {
            return value;
        }
    } width;

    class Height { public:
        Canvas& canvas;
        int value;
        Height(Canvas& canvas): canvas(canvas) {}
        int & operator = (const int &i) {
            value = i;
            canvas.resize();
            return value;
        }
        operator int () const {
            return value;
        }
    } height;
};

int main() {
    Canvas canvas(256, 256);
    canvas.width = 128;
    canvas.height = 64;
}

Output:

new canvas 256 256
resize to 128 256
resize to 128 64

You can test it online here: http://codepad.org/zosxqjTX

PS: FO Yvette <3

This is derived from @fallino's answer, with some adjustments and simplifications by using the output format option for docker history. Since macOS and Gnu/Linux have different command-line utilities, a different version is necessary for Mac. If you only need one or the other, you can just use those lines.

#!/bin/bash
case "$OSTYPE" in
    linux*)
        docker history --no-trunc --format "{{.CreatedBy}}" $1 | # extract information from layers
        tac                                                    | # reverse the file
        sed 's,^\(|3.*\)\?/bin/\(ba\)\?sh -c,RUN,'             | # change /bin/(ba)?sh calls to RUN
        sed 's,^RUN #(nop) *,,'                                | # remove RUN #(nop) calls for ENV,LABEL...
        sed 's,  *&&  *, \\\n \&\& ,g'                           # pretty print multi command lines following Docker best practices
    ;;
    darwin*)
        docker history --no-trunc --format "{{.CreatedBy}}" $1 | # extract information from layers
        tail -r                                                | # reverse the file
        sed -E 's,^(\|3.*)?/bin/(ba)?sh -c,RUN,'               | # change /bin/(ba)?sh calls to RUN
        sed 's,^RUN #(nop) *,,'                                | # remove RUN #(nop) calls for ENV,LABEL...
        sed $'s,  *&&  *, \\\ \\\n \&\& ,g'                      # pretty print multi command lines following Docker best practices
    ;;
    *)
        echo "unknown OSTYPE: $OSTYPE"
    ;;
esac

build.gradle (Project)

buildScript {
    ...
    dependencies {
        ...
        classpath 'com.android.tools.build:gradle:4.0.0-rc01'
    }
} 

gradle/wrapper/gradle-wrapper.properties

...
distributionUrl=https\://services.gradle.org/distributions/gradle-6.1.1-all.zip

Some libraries require the updated gradle. Such as:

androidTestImplementation "org.jetbrains.kotlinx:kotlinx-coroutines-test:$coroutines"

GL

API keys are just one way of authenticating users of web services.

Swift 2.2

func + <K,V>(left: [K : V], right: [K : V]) -> [K : V] {
    var result = [K:V]()

    for (key,value) in left {
        result[key] = value
    }

    for (key,value) in right {
        result[key] = value
    }
    return result
}

This is what I do, just add \n and use encodeURIComponent

Example

var emailBody = "1st line.\n 2nd line \n 3rd line";

emailBody = encodeURIComponent(emailBody);

href = "mailto:[email protected]?body=" + emailBody;

Check encodeURIComponent docs

You may try this. It solved my issue.

import matplotlib.image as mpimg
img = mpimg.imread("src.png")
mpimg.imsave("out.png", img, cmap=cmap)

As has been stated, you can't programmatically open a <select> using JavaScript.

However, you could write your own <select> managing the entire look and feel yourself. Something like what you see for the autocomplete search terms on Google or Yahoo! or the Search for Location box at The Weather Network.

I found one for jQuery here. I have no idea whether it would meet your needs, but even if it doesn't completely meet your needs, it should be possible to modify it so it would open as the result of some other action or event. This one actually looks more promising.

Like @Kieran 's Answer, but for the console: git log --oneline --all --graph --decorate $(git reflog | awk '{print $1}')

As already mentioned, Chrome Extensions don't allow to have inline JavaScript due to security reasons so you can try this workaround as well.

HTML file

<!doctype html>
    <html>
        <head>
            <title>
                Getting Started Extension's Popup
            </title>
            <script src="popup.js"></script>
        </head>
        <body>
            <div id="text-holder">ha</div><br />
            <a class="clickableBtn">
                  hyhy
            </a>
        </body>
    </html>
<!doctype html>

popup.js

window.onclick = function(event) {
    var target = event.target ;
    if(target.matches('.clickableBtn')) {
        var clickedEle = document.activeElement.id ;
        var ele = document.getElementById(clickedEle);
        alert(ele.text);
    }
}

Or if you are having a Jquery file included then

window.onclick = function(event) {
    var target = event.target ;
    if(target.matches('.clickableBtn')) {
        alert($(target).text());
    }
}

I found something that will load user-packed extensions and works beautifully:

You'll still have to pack it in details for the problem extension, but after that you can turn off developer mode and load the packed CRX through this. You don't have to deal with signing it or anything.

https://chrome.google.com/webstore/detail/crosspilot/migomhggnppjdijnfkiimcpjgnhmnale?hl=en

Note: I'm not from their team, I've just been looking for an elegant solution for this for years.

Here's a complete example of including one script within another.
Just run the Testmain.groovy file
Explanatory comments included because I'm nice like that ;]

Testutils.groovy

// This is the 'include file'
// Testmain.groovy will load it as an implicit class
// Each method in here will become a method on the implicit class

def myUtilityMethod(String msg) {
    println "myUtilityMethod running with: ${msg}"
}

Testmain.groovy

// Run this file

// evaluate implicitly creates a class based on the filename specified
evaluate(new File("./Testutils.groovy"))
// Safer to use 'def' here as Groovy seems fussy about whether the filename (and therefore implicit class name) has a capital first letter
def tu = new Testutils()
tu.myUtilityMethod("hello world")

Initially define a function pointer array which takes a void and returns a void.

Assuming that your function is taking a void and returning a void.

typedef void (*func_ptr)(void);

Now you can use this to create function pointer variables of such functions.

Like below:

func_ptr array_of_fun_ptr[3];

Now store the address of your functions in the three variables.

array_of_fun_ptr[0]= &A;
array_of_fun_ptr[1]= &B;
array_of_fun_ptr[2]= &C;

Now you can call these functions using function pointers as below:

some_a=(*(array_of_fun_ptr[0]))();
some_b=(*(array_of_fun_ptr[1]))();
some_c=(*(array_of_fun_ptr[2]))();

You could use print_r and html interpret it to convert it into a string with newlines like this:

$arraystring = print_r($your_array, true); 

$arraystring = '<pre>'.print_r($your_array, true).'</pre>';

Or you could mix many arrays and vars if you do this

ob_start();
print_r($var1);
print_r($arr1);
echo "blah blah";
print_r($var2);
print_r($var1);
$your_string_var = ob_get_clean();

- Each time you append or do any modification with it, it creates a new String object.

- So use append() method of StringBuilder(If thread safety is not important), else use StringBuffer(If thread safety is important.), that will be efficient way to do it.

You need an extra reference for this; the most convenient way to do this is via the NuGet package System.IO.Compression.ZipFile

<!-- Version here correct at time of writing, but please check for latest -->
<PackageReference Include="System.IO.Compression.ZipFile" Version="4.3.0" />

If you are working on .NET Framework without NuGet, you need to add a dll reference to the assembly, "System.IO.Compression.FileSystem.dll" - and ensure you are using at least .NET 4.5 (since it doesn't exist in earlier frameworks).

For info, you can find the assembly and .NET version(s) from MSDN

Under VS2013 you can install the new compilers into the project as a nuget package. That way you don't need VS2015 or an updated build server.

https://www.nuget.org/packages/Microsoft.Net.Compilers/

Install-Package Microsoft.Net.Compilers

The package allows you to use/build C# 6.0 code/syntax. Because VS2013 doesn't natively recognize the new C# 6.0 syntax, it will show errors in the code editor window although it will build fine.

Using Resharper, you'll get squiggly lines on C# 6 features, but the bulb gives you the option to 'Enable C# 6.0 support for this project' (setting saved to .DotSettings).

As mentioned by @stimpy77: for support in MVC Razor views you'll need an extra package (for those that don't read the comments)

Install-Package Microsoft.CodeDom.Providers.DotNetCompilerPlatform

If you want full C# 6.0 support, you'll need to install VS2015.

Try this, It will help.

I have used this in my project.

SELECT 
*
FROM
customer c
OUTER APPLY(SELECT top 1 * FROM purchase pi 
WHERE pi.customer_id = c.Id order by pi.Id desc) AS [LastPurchasePrice]

Remove the canvas dom and add in again.

function renderChart(label,data){

    $("#canvas-wrapper").html("").html('<canvas id="storeSends"></canvas>');
    var lineChartData = {
        labels : label,
        datasets : [
            {
                fillColor : "rgba(49, 195, 166, 0.2)",
                strokeColor : "rgba(49, 195, 166, 1)",
                pointColor : "rgba(49, 195, 166, 1)",
                pointStrokeColor : "#fff",
                data : data
            }
        ]

    }
    var canvas = document.getElementById("storeSends");
    var ctx = canvas.getContext("2d");

    myLine = new Chart(ctx).Line(lineChartData, {
        responsive: true,
        maintainAspectRatio: false
    });
}

A possible alternative for that:

1. Use an encoder (e.g. VLC or FFmpeg) into packetize your input stream to OGG format. For example, in this case I used VLC to packetize screen capture device with this code:

   C:\Program Files\VideoLAN\VLC\vlc.exe -I dummy screen:// :screen-fps=16.000000 :screen-caching=100 :sout=#transcode{vcodec=theo,vb=800,scale=1,width=600,height=480,acodec=mp3}:http{mux=ogg,dst=127.0.0.1:8080/desktop.ogg} :no-sout-rtp-sap :no-sout-standard-sap :ttl=1 :sout-keep

2. Embed this code into a <video> tag in your HTML page like that:

   <video id="video" src="http://localhost:8080/desktop.ogg" autoplay="autoplay" />

This should do the trick. However it's kind of poor performance and AFAIK MP4 container type should have a better support among browsers than OGG.

Just a complete example for spring boot application with RFC3339 datetime format

package bj.demo;

import com.fasterxml.jackson.databind.ObjectMapper;
import org.springframework.beans.factory.annotation.Autowired;
import org.springframework.boot.SpringApplication;
import org.springframework.boot.autoconfigure.SpringBootApplication;
import org.springframework.boot.context.event.ApplicationReadyEvent;
import org.springframework.context.ApplicationListener;

import java.text.SimpleDateFormat;

/**
 * Created by [email protected] at 2018/5/4 10:22
 */
@SpringBootApplication
public class BarApp implements ApplicationListener<ApplicationReadyEvent> {

    public static void main(String[] args) {
        SpringApplication.run(BarApp.class, args);
    }

    @Autowired
    private ObjectMapper objectMapper;

    @Override
    public void onApplicationEvent(ApplicationReadyEvent applicationReadyEvent) {
        objectMapper.setDateFormat(new SimpleDateFormat("yyyy-MM-dd'T'HH:mm:ssXXX"));
    }
}

If the numbers are seprated by whitespace in the string then you can use sscanf(). Since, it's not the case with your example, you have to do it yourself:

char tmp[256];

for(i=0;str[i];i++)
{
  j=0;
  while(str[i]>='0' && str[i]<='9')
  {
     tmp[j]=str[i];
     i++;
     j++;
  }
  tmp[j]=0;
  printf("%ld", strtol(tmp, &tmp, 10));
  // Or store in an integer array

}

This is CSS issues. I don't know why @Html.DropDownListFor in Bootstrap 4 doest work. Surely this is class design problem. Anyways the work arround is, if your Dropdown input box has CSS Padding: #px, # px; element then disable it. Hope this will work.

One use-case is that you have named (some of) your columns with some prefix, and you want the columns sorted with those prefixes all together and in some particular order (not alphabetical).

For example, you might start all of your features with Ft_, labels with Lbl_, etc, and you want all unprefixed columns first, then all features, then the label. You can do this with the following function (I will note a possible efficiency problem using sum to reduce lists, but this isn't an issue unless you have a LOT of columns, which I do not):

def sortedcols(df, groups = ['Ft_', 'Lbl_'] ):
    return df[ sum([list(filter(re.compile(r).search, list(df.columns).copy())) for r in (lambda l: ['^(?!(%s))' % '|'.join(l)] + ['^%s' % i  for i in l ] )(groups)   ], [])  ]

My attempt.

Only acts if all text is lowercase or all uppercase, uses Locale case conversion. Attempts to respect intentional case difference or a ' or " in names. Happens on Blur as to not cause annoyances on phones. Although left in selection start/end so if changed to keyup maybe useful still. Should work on phones but have not tried.

$.fn.capitalize = function() {
    $(this).blur(function(event) {
        var box = event.target;
        var txt = $(this).val();
        var lc = txt.toLocaleLowerCase();
        var startingWithLowerCaseLetterRegex = new RegExp("\b([a-z])", "g");
        if (!/([-'"])/.test(txt) && txt === lc || txt === txt.toLocaleUpperCase()) {
            var stringStart = box.selectionStart;
            var stringEnd = box.selectionEnd;
            $(this).val(lc.replace(startingWithLowerCaseLetterRegex, function(c) { return c.toLocaleUpperCase() }).trim());
            box.setSelectionRange(stringStart, stringEnd);
        }
    });
   return this;
}

// Usage:
$('input[type=text].capitalize').capitalize();

map[key] = value is provided for easier syntax. It is easier to read and write.

The reason for which you need to have default constructor is that map[key] is evaluated before assignment. If key wasn't present in map, new one is created (with default constructor) and reference to it is returned from operator[].

The best way is to store native JavaScript Date objects, which map onto BSON native Date objects.

> db.test.insert({date: ISODate()})
> db.test.insert({date: new Date()})
> db.test.find()
{ "_id" : ObjectId("..."), "date" : ISODate("2014-02-10T10:50:42.389Z") }
{ "_id" : ObjectId("..."), "date" : ISODate("2014-02-10T10:50:57.240Z") }

The native type supports a whole range of useful methods out of the box, which you can use in your map-reduce jobs, for example.

If you need to, you can easily convert Date objects to and from Unix timestamps¹⁾, using the getTime() method and Date(milliseconds) constructor, respectively.

¹⁾ Strictly speaking, the Unix timestamp is measured in seconds. The JavaScript Date object measures in milliseconds since the Unix epoch.

You can select last characters with -

WHERE SUBSTR('Hello world', -4)

Here is a simple example. I suppose it will be easy to understand:

import java.awt.*;
import javax.swing.JFrame;
import javax.swing.JPanel;

public class Graph extends JFrame {
JFrame f = new JFrame();
JPanel jp;


public Graph() {
    f.setTitle("Simple Drawing");
    f.setSize(300, 300);
    f.setDefaultCloseOperation(EXIT_ON_CLOSE);

    jp = new GPanel();
    f.add(jp);
    f.setVisible(true);
}

public static void main(String[] args) {
    Graph g1 = new Graph();
    g1.setVisible(true);
}

class GPanel extends JPanel {
    public GPanel() {
        f.setPreferredSize(new Dimension(300, 300));
    }

    @Override
    public void paintComponent(Graphics g) {
        //rectangle originates at 10,10 and ends at 240,240
        g.drawRect(10, 10, 240, 240);
        //filled Rectangle with rounded corners.    
        g.fillRoundRect(50, 50, 100, 100, 80, 80);
    }
}

}

And the output looks like this:

The CLR uses it when it is compiling at runtime. Here is a link to MSDN that explains further.

LTRIM(RTRIM(FCT_TYP_CD)) & ') AND (' & LTRIM(RTRIM(DEP_TYP_ID)) & ')'

I think you're missing a ) on both of the trims. Some SQL versions support just TRIM which does both L and R trims...

All you have to do is create a subset of your dataframe where the isin method evaluates to False:

df = df[df['Column Name'].isin(['Value']) == False]

The awnser of @Alireza is totally correct, but you must notice that when using this code

var res = from element in list
          group element by element.F1
              into groups
              select groups.OrderBy(p => p.F2).First();

which is simillar to this code because you ordering the list and then do the grouping so you are getting the first row of groups

var res = (from element in list)
          .OrderBy(x => x.F2)
          .GroupBy(x => x.F1)
          .Select()

Now if you want to do something more complex like take the same grouping result but take the first element of F2 and the last element of F3 or something more custom you can do it by studing the code bellow

 var res = (from element in list)
          .GroupBy(x => x.F1)
          .Select(y => new
           {
             F1 = y.FirstOrDefault().F1;
             F2 = y.First().F2;
             F3 = y.Last().F3;
           });

So you will get something like

   F1            F2             F3 
 -----------------------------------
   Nima          1990           12
   John          2001           2
   Sara          2010           4

I believe the default precision is 38, default scale is zero. However the actual size of an instance of this column, is dynamic. It will take as much space as needed to store the value, or max 21 bytes.

Really have to do this with JS. Here's a solution. I didn't use your class names, but I called the div within the td class name of "full-height" :-) Used jQuery, obviously. Note this was called from jQuery(document).ready(function(){ setFullHeights();}); Also note if you have images, you are going to have to iterate through them first with something like:

function loadedFullHeights(){
var imgCount = jQuery(".full-height").find("img").length;
if(imgCount===0){
    return setFullHeights();
}
var loaded = 0;
jQuery(".full-height").find("img").load(function(){
    loaded++;
    if(loaded ===imgCount){
        setFullHeights()
    }
});

}

And you would want to call the loadedFullHeights() from docReady instead. This is actually what I ended up using just in case. Got to think ahead you know!

function setFullHeights(){
var par;
var height;
var $ = jQuery;
var heights=[];
var i = 0;
$(".full-height").each(function(){
    par =$(this).parent();
    height = $(par).height();
    var tPad = Number($(par).css('padding-top').replace('px',''));
    var bPad = Number($(par).css('padding-bottom').replace('px',''));
    height -= tPad+bPad;
    heights[i]=height;
    i++;
});
for(ii in heights){
    $(".full-height").eq(ii).css('height', heights[ii]+'px');
}

}

As @PirateApp mentioned in his comment, it's explicitly against Google's Maps API Licensing to use the Maps API as you intend.

You have a number of alternatives, including downloading a Geoip database and querying it locally or using a third party API service, such as my service ipdata.co.

ipdata gives you the geolocation, organisation, currency, timezone, calling code, flag and Tor Exit Node status data from any IPv4 or IPv6 address.

And is scalable with 10 global endpoints each able to handle >10,000 requests per second!

This answer uses a 'test' API Key that is very limited and only meant for testing a few calls. Signup for your own Free API Key and get up to 1500 requests daily for development.

$.get("https://api.ipdata.co?api-key=test", function(response) {_x000D_
  $("#ip").html("IP: " + response.ip);_x000D_
  $("#city").html(response.city + ", " + response.region);_x000D_
  $("#response").html(JSON.stringify(response, null, 4));_x000D_
}, "jsonp");

<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>_x000D_
<h1><a href="https://ipdata.co">ipdata.co</a> - IP geolocation API</h1>_x000D_
_x000D_
<div id="ip"></div>_x000D_
<div id="city"></div>_x000D_
<pre id="response"></pre>

The fiddle; https://jsfiddle.net/ipdata/6wtf0q4g/922/

You can use DOMNodeInserted mutation event (no need delegation):

$('body').on('DOMNodeInserted', function(e) {
    var target = e.target; //inserted element;
});

EDIT: Mutation events are deprecated, use mutation observer instead

Be aware that although mariadDB loads configuration details from the various my.cnf files as listed in the other answers here, it can also load them from other files with different names.

That means that if you make a change in one of the my.cnf files, it may get overwritten by another file of a different name. To make the change stick, you need to change it in the right (last loaded) config file - or, maybe, change it in all of them.

So how do you find all the config files that might be loaded? Instead of looking for my.cnf files, try running:

grep -r datadir /etc/mysql/

This will find all the places in which datadir is mentioned. In my case, it produces this answer:

/etc/mysql/mariadb.conf.d/50-server.cnf:datadir     = /var/lib/mysql 

When I edit that file (/etc/mysql/mariadb.conf.d/50-server.cnf) to change the value for datadir, it works, whereas changing it in my.cnf does not. So whatever option you are wanting to change, try looking for it this way.

The timestamp casted correctly between formats else there is a chance the fields would be misinterpreted.

Here is a working sample that is correct when two different dates (Date2, Date1) are considered from table TableXYZ.

SELECT ROUND (totalSeconds / (24 * 60 * 60), 1) TotalTimeSpendIn_DAYS,
       ROUND (totalSeconds / (60 * 60), 0) TotalTimeSpendIn_HOURS,
       ROUND (totalSeconds / 60) TotalTimeSpendIn_MINUTES,
       ROUND (totalSeconds) TotalTimeSpendIn_SECONDS
  FROM (SELECT ROUND (
                    EXTRACT (DAY FROM timeDiff) * 24 * 60 * 60
                  + EXTRACT (HOUR FROM timeDiff) * 60 * 60
                  + EXTRACT (MINUTE FROM timeDiff) * 60
                  + EXTRACT (SECOND FROM timeDiff))
                  totalSeconds,
          FROM (SELECT TO_TIMESTAMP (
                            TO_CHAR (Date2,
                                     'yyyy-mm-dd HH24:mi:ss')
                          - 'yyyy-mm-dd HH24:mi:ss'),
                       TO_TIMESTAMP (
                          TO_CHAR (Date1,
                                   'yyyy-mm-dd HH24:mi:ss'),
                          'yyyy-mm-dd HH24:mi:ss')
                          timeDiff
                  FROM TableXYZ))

Look at strtok(). strtok() is not a re-entrant function.

strtok_r() is the re-entrant version of strtok(). Here's an example program from the manual:

   #include <stdio.h>
   #include <stdlib.h>
   #include <string.h>

   int main(int argc, char *argv[])
   {
       char *str1, *str2, *token, *subtoken;
       char *saveptr1, *saveptr2;
       int j;

       if (argc != 4) {
           fprintf(stderr, "Usage: %s string delim subdelim\n",argv[0]);
           exit(EXIT_FAILURE);
       }

       for (j = 1, str1 = argv[1]; ; j++, str1 = NULL) {
           token = strtok_r(str1, argv[2], &saveptr1);
           if (token == NULL)
               break;
           printf("%d: %s\n", j, token);

           for (str2 = token; ; str2 = NULL) {
               subtoken = strtok_r(str2, argv[3], &saveptr2);
               if (subtoken == NULL)
                   break;
               printf(" --> %s\n", subtoken);
           }
       }

       exit(EXIT_SUCCESS);
   }

Sample run which operates on subtokens which was obtained from the previous token based on a different delimiter:

$ ./a.out hello:word:bye=abc:def:ghi = :

1: hello:word:bye
 --> hello
 --> word
 --> bye
2: abc:def:ghi
 --> abc
 --> def
 --> ghi

To add to Lennart Regebro's answer There is even the third way that can be used:

encoded3 = str.encode(original, 'utf-8')
print(encoded3)

Anyway, it is actually exactly the same as the first approach. It may also look that the second way is a syntactic sugar for the third approach.

A programming language is a means to express abstract ideas formally, to be executed by the machine. A programming language is considered good if it contains constructs that one needs. Python is a hybrid language -- i.e. more natural and more versatile than pure OO or pure procedural languages. Sometimes functions are more appropriate than the object methods, sometimes the reverse is true. It depends on mental picture of the solved problem.

Anyway, the feature mentioned in the question is probably a by-product of the language implementation/design. In my opinion, this is a nice example that show the alternative thinking about technically the same thing.

In other words, calling an object method means thinking in terms "let the object gives me the wanted result". Calling a function as the alternative means "let the outer code processes the passed argument and extracts the wanted value".

The first approach emphasizes the ability of the object to do the task on its own, the second approach emphasizes the ability of an separate algoritm to extract the data. Sometimes, the separate code may be that much special that it is not wise to add it as a general method to the class of the object.

Quick sort is an in-place sorting algorithm, so its better suited for arrays. Merge sort on the other hand requires extra storage of O(N), and is more suitable for linked lists.

Unlike arrays, in liked list we can insert items in the middle with O(1) space and O(1) time, therefore the merge operation in merge sort can be implemented without any extra space. However, allocating and de-allocating extra space for arrays have an adverse effect on the run time of merge sort. Merge sort also favors linked list as data is accessed sequentially, without much random memory access.

Quick sort on the other hand requires a lot of random memory access and with an array we can directly access the memory without any traversing as required by linked lists. Also quick sort when used for arrays have a good locality of reference as arrays are stored contiguously in memory.

Even though both sorting algorithms average complexity is O(NlogN), usually people for ordinary tasks uses an array for storage, and for that reason quick sort should be the algorithm of choice.

EDIT: I just found out that merge sort worst/best/avg case is always nlogn, but quick sort can vary from n2(worst case when elements are already sorted) to nlogn(avg/best case when pivot always divides the array in two halves).

This is an important thing to be able to do for monitoring where certain processes try to connect to, and it seems there isn't any convenient way to do this on Linux. However, several workarounds are possible, and so I feel it is worth mentioning them.

There is a program called nonet which allows running a program with no Internet access (I have most program launchers on my system set up with it). It uses setguid to run a process in group nonet and sets an iptables rule to refuse all connections from this group.

Update: by now I use an even simpler system, you can easily have a readable iptables configuration with ferm, and just use the program sg to run a program with a specific group. Iptables also alows you to reroute traffic so you can even route that to a separate interface or a local proxy on a port whith allows you to filter in wireshark or LOG the packets directly from iptables if you don't want to disable all internet while you are checking out traffic.

It's not very complicated to adapt it to run a program in a group and cut all other traffic with iptables for the execution lifetime and then you could capture traffic from this process only.

If I ever come round to writing it, I'll post a link here.

On another note, you can always run a process in a virtual machine and sniff the correct interface to isolate the connections it makes, but that would be quite an inferior solution...

If one or both of your dates are in the future, then I'm afraid you're SOL if you want to-the-second accuracy. UTC time has leap seconds that aren't known until about 6 months before they happen, so any dates further out than that can be inaccurate by some number of seconds (and in practice, since people don't update their machines that often, you may find that any time in the future is off by some number of seconds).

This gives a good explanation of the theory of designing date/time libraries and why this is so: http://www.boost.org/doc/libs/1_41_0/doc/html/date_time/details.html#date_time.tradeoffs

From Wikipedia,

A database management system (DBMS) is a computer software application that interacts with the user, other applications, and the database itself to capture and analyze data. A general-purpose DBMS is designed to allow the definition, creation, querying, update, and administration of databases.

There are different types of DBMS products: relational, network and hierarchical. The most widely commonly used type of DBMS today is the Relational Database Management Systems (RDBMS)

DBMS:

• A DBMS is a storage area that persist the data in files.
• There are limitations to store records in a single database file.
• DBMS allows the relations to be established between 2 files.
• Data is stored in flat files with metadata.
• DBMS does not support client / server architecture.
• DBMS does not follow normalization. Only single user can access the data.
• DBMS does not impose integrity constraints.
• ACID properties of database must be implemented by the user or the developer

RDBMS:

• RDBMS stores the data in tabular form.
• It has additional condition for supporting tabular structure or data that enforces relationships among tables.
• RDBMS supports client/server architecture.
• RDBMS follows normalization.
• RDBMS allows simultaneous access of users to data tables.
• RDBMS imposes integrity constraints.
• ACID properties of the database are defined in the integrity constraints.

Have a look at this article for more details.

You can just use css :

#id_fieldname, label[for="id_fieldname"] {_x000D_
  position: absolute;_x000D_
  display: none_x000D_
}

This will make the field and its label invisible.

Update PHP 7.4

Curly brace access syntax is deprecated since PHP 7.4

Update 2019

Moving on to the best practices of OOPS, @MrTrick's answer must be marked as correct, although my answer provides a hacked solution its not the best method.

Simply iterate its using {}

Example:

$videos{0}->id

This way your object is not destroyed and you can easily iterate through object.

For PHP 5.6 and below use this

$videos{0}['id']

Both array() and the stdClass objects can be accessed using the current() key() next() prev() reset() end() functions.

So, if your object looks like

object(stdClass)#19 (3) {
  [0]=>
  object(stdClass)#20 (22) {
    ["id"]=>
    string(1) "123"
  etc...

Then you can just do;

$id = reset($obj)->id; //Gets the 'id' attr of the first entry in the object

If you need the key for some reason, you can do;

reset($obj); //Ensure that we're at the first element
$key = key($obj);

Hope that works for you. :-) No errors, even in super-strict mode, on PHP 5.4

2022 Update:
After PHP 7.4, using current(), end(), etc functions on objects is deprecated.

In newer versions of PHP, use the ArrayIterator class:

$objIterator = new ArrayIterator($obj);

$id = $objIterator->current()->id; // Gets the 'id' attr of the first entry in the object

$key = $objIterator->key(); // and gets the key

"df.values" returns a numpy array. This does not preserve the data types. An integer might be converted to a float.

df.iterrows() returns a series which also does not guarantee to preserve the data types. See: https://pandas.pydata.org/pandas-docs/stable/reference/api/pandas.DataFrame.iterrows.html

The code below converts to a list of list and preserves the data types:

rows = [list(row) for row in df.itertuples()]

Check this blog by Martin Thoma. I tested the below code on MacOS Mojave and it worked as specified.

> def get_browser():
>     """Get the browser (a "driver")."""
>     # find the path with 'which chromedriver'
>     path_to_chromedriver = ('/home/moose/GitHub/algorithms/scraping/'
>                             'venv/bin/chromedriver')
>     download_dir = "/home/moose/selenium-download/"
>     print("Is directory: {}".format(os.path.isdir(download_dir)))
> 
>     from selenium.webdriver.chrome.options import Options
>     chrome_options = Options()
>     chrome_options.add_experimental_option('prefs', {
>         "plugins.plugins_list": [{"enabled": False,
>                                   "name": "Chrome PDF Viewer"}],
>         "download": {
>             "prompt_for_download": False,
>             "default_directory": download_dir
>         }
>     })
> 
>     browser = webdriver.Chrome(path_to_chromedriver,
>                                chrome_options=chrome_options)
>     return browser

Personally I sanitize all my data with some PHP libraries before going into the database so there's no need for another XSS filter for me.

From AngularJS 1.0.8

directives.directive('ngBindHtmlUnsafe', [function() {
    return function(scope, element, attr) {
        element.addClass('ng-binding').data('$binding', attr.ngBindHtmlUnsafe);
        scope.$watch(attr.ngBindHtmlUnsafe, function ngBindHtmlUnsafeWatchAction(value) {
            element.html(value || '');
        });
    }
}]);

To use:

<div ng-bind-html-unsafe="group.description"></div>

To disable $sce:

app.config(['$sceProvider', function($sceProvider) {
    $sceProvider.enabled(false);
}]);

@Thad you need to add a blur event handler as well

$(document).ready(function(){
    $("#dropdown").mousedown(function(){
        if($.browser.msie) {
            $(this).css("width","auto");
        }
    });
    $("#dropdown").change(function(){
        if ($.browser.msie) {
            $(this).css("width","175px");
        }
    });
    $("#dropdown").blur(function(){
        if ($.browser.msie) {
            $(this).css("width","175px");
        }
    });
});

However, this will still expand the selectbox on click, instead of just the elements. (and it seems to fail in IE6, but works perfectly in Chrome and IE7)

Johannes Sixt from the [email protected] mailing list suggested using following command line arguments:

git apply --ignore-space-change --ignore-whitespace mychanges.patch

This solved my problem.

If using the following HTML:

<button id="submit-button"></button>

Style can be applied through JS using the style object available on an HTMLElement.

To set height and width to 200px of the above example button, this would be the JS:

var myButton = document.getElementById('submit-button');
myButton.style.height = '200px';
myButton.style.width= '200px';

I believe with this method, you are not directly writing CSS (inline or external), but using JavaScript to programmatically alter CSS Declarations.

Although there are many alternatives to Apache commons, their implementations are rudimentary at best (like Apache commons' implementation itself) and even dead wrong in other cases.

I'd also stay away from so called simple 'non-restrictive' regex; there's no such thing. For example @ is allowed multiple times depending on context, how do you know the required one is there? Simple regex won't understand it, even though the email should be valid. Anything more complex becomes error-prone or even contain hidden performance killers. How are you going to maintain something like this?

The only comprehensive RFC compliant regex based validator I'm aware of is email-rfc2822-validator with its 'refined' regex appropriately named Dragons.java. It supports only the older RFC-2822 spec though, although appropriate enough for modern needs (RFC-5322 updates it in areas already out of scope for daily use cases).

But really what you want is a lexer that properly parses a string and breaks it up into the component structure according to the RFC grammar. EmailValidator4J seems promising in that regard, but is still young and limited.

Another option you have is using a webservice such as Mailgun's battle-tested validation webservice or Mailboxlayer API (just took the first Google results). It is not strictly RFC compliant, but works well enough for modern needs.

Below is the link which guide in parsing JSON string in android.

http://www.ibm.com/developerworks/xml/library/x-andbene1/?S_TACT=105AGY82&S_CMP=MAVE

Also according to your json string code snippet must be something like this:-

JSONObject mainObject = new JSONObject(yourstring);

JSONObject universityObject = mainObject.getJSONObject("university");
JSONString name = universityObject.getString("name");  
JSONString url = universityObject.getString("url");

Following is the API reference for JSOnObject: https://developer.android.com/reference/org/json/JSONObject.html#getString(java.lang.String)

Same for other object.

UPDATE: This is only true if you use ONLYOFFICE instead of MS Excel.

There is actually a flow in all answers provided here and also in the accepted one. The flow is that whenever you have an empty cell in excel and copy that, in the clipboard you have 2 tab chars next to each other, so after splitting you get one additional item in array, which then appears as an extra cell in that row and moves all other cells by one. So to avoid that you basically need to replace all double tab (tabs next to each other only) chars in a string with one tab char and only then split it.

An updated version of @userfuser's jsfiddle is here to fix that issue by filtering pasted data with removeExtraTabs

http://jsfiddle.net/sTX7y/794/

function removeExtraTabs(string) {
  return string.replace(new RegExp("\t\t", 'g'), "\t");
}

function generateTable() {
  var data = removeExtraTabs($('#pastein').val());
  var rows = data.split("\n");
  var table = $('<table />');

  for (var y in rows) {
    var cells = rows[y].split("\t");
    var row = $('<tr />');
    for (var x in cells) {
      row.append('<td>' + cells[x] + '</td>');
    }
    table.append(row);
  }

  // Insert into DOM
  $('#excel_table').html(table);
}

$(document).ready(function() {
  $('#pastein').on('paste', function(event) {
    $('#pastein').on('input', function() {
      generateTable();
      $('#pastein').off('input');
    })
  })
})

skip.header.line.count will skip the header line.

However, if you have some external tool accessing accessing the table, it will still see that actual data without skipping those lines

og:title is one of the open graph meta tags. og:... properties define objects in a social graph. They are used for example by Facebook.

og:title stands for the title of your object as it should appear within the graph (see here for more http://ogp.me/ )

Presumably, if one wants to use an OnTouchListener rather than an OnClickListener, then the extra functionality of the OnTouchListener is needed. This is a supplemental answer to show more detail of how an OnTouchListener can be used.

Define the listener

Put this somewhere in your activity or fragment.

private View.OnTouchListener handleTouch = new View.OnTouchListener() {

    @Override
    public boolean onTouch(View v, MotionEvent event) {

        int x = (int) event.getX();
        int y = (int) event.getY();

        switch (event.getAction()) {
            case MotionEvent.ACTION_DOWN:
                Log.i("TAG", "touched down");
                break;
            case MotionEvent.ACTION_MOVE:
                Log.i("TAG", "moving: (" + x + ", " + y + ")");
                break;
            case MotionEvent.ACTION_UP:
                Log.i("TAG", "touched up");
                break;
        }

        return true;
    }
};

Set the listener

Set the listener in onCreate (for an Activity) or onCreateView (for a Fragment).

myView.setOnTouchListener(handleTouch);

Notes

• getX and getY give you the coordinates relative to the view (that is, the top left corner of the view). They will be negative when moving above or to the left of your view. Use getRawX and getRawY if you want the absolute screen coordinates.
• You can use the x and y values to determine things like swipe direction.

Consider also .attr()

$("#roommate_but").attr("disabled", true); worked for me.

You could try to use ng-class.
Here is my simple example:
http://plnkr.co/edit/wS3QkQ5dvHNdc6Lb8ZSF?p=preview

<div ng-repeat="object in objects">
  <span ng-class="{'disabled': object.status}" ng-click="disableIt(object)">
    {{object.value}}
  </span>
</div>

The status is a custom attribute of object, you could name it whatever you want.
The disabled in ng-class is a CSS class name, the object.status should be true or false

You could change every object's status in function disableIt.
In your Controller, you could do this:

$scope.disableIt = function(obj) {
  obj.status = !obj.status
}

The Z stands for 'Zulu' - your times are in UTC. From Wikipedia:

The UTC time zone is sometimes denoted by the letter Z—a reference to the equivalent nautical time zone (GMT), which has been denoted by a Z since about 1950. The letter also refers to the "zone description" of zero hours, which has been used since 1920 (see time zone history). Since the NATO phonetic alphabet and amateur radio word for Z is "Zulu", UTC is sometimes known as Zulu time. This is especially true in aviation, where Zulu is the universal standard.

I did that in the following way for an image, you should be able to do it for text using similar steps.

// folder & name of image on PC          
File fileObj = new File("C:\\Displayable\\imgcopy.jpg"); 

Boolean testB = fileObj.createNewFile();

System.out.println("Test this file eeeeeeeeeeeeeeeeeeee "+testB);

// image on server
URL url = new URL("http://localhost:8181/POPTEST2/imgone.jpg"); 
InputStream webIS = url.openStream();

FileOutputStream fo = new FileOutputStream(fileObj);
int c = 0;
do {
    c = webIS.read();
    System.out.println("==============> " + c);
    if (c !=-1) {
        fo.write((byte) c);
    }
} while(c != -1);

webIS.close();
fo.close();

1. Down the apache server by running below in putty cd $ADMIN_SCRIPTS_HOME ./adstpall.sh
2. Drop the Global temporary tables drop table t;

This will workout..

@modesty:

I wish there was a Mac version.

You can install the font on a Mac. I use it all the time, everywhere, without any problem. The only thing to pay attention for is to set nomacatsui when working with GVIM, or better yet, switch to MacVim.

q = request.GET.get("q", None)
if q:
    message = 'q= %s' % q
else:
    message = 'Empty'

In my case i never put return inside a arrow function so my code is follow

`<ProductConsumer>
   {(myvariable)=>{
      return  <h1>{myvariable}</h1>
   }}
</ProductConsumer> `

If you need the result in a date format you can use:

Select Convert(DateTime, Convert(VarChar, GetDate(), 101))

Content is what is passed as children. View is the template of the current component.

The view is initialized before the content and ngAfterViewInit() is therefore called before ngAfterContentInit().

** ngAfterViewInit() is called when the bindings of the children directives (or components) have been checked for the first time. Hence its perfect for accessing and manipulating DOM with Angular 2 components. As @Günter Zöchbauer mentioned before is correct @ViewChild() hence runs fine inside it.

Example:

@Component({
    selector: 'widget-three',
    template: `<input #input1 type="text">`
})
export class WidgetThree{
    @ViewChild('input1') input1;

    constructor(private renderer:Renderer){}

    ngAfterViewInit(){
        this.renderer.invokeElementMethod(
            this.input1.nativeElement,
            'focus',
            []
        )
    }
}

Increment and decrement by 10.

require(Hmisc)
inc(x) <- 10 

dec(x) <- 10

def function(a):
    if a == '1':
        print ('1a')
    else if a == '2'
        print ('2a')
    else print ('3a')

Should be corrected to:

def function(a):
    if a == '1':
        print('1a')
    elif a == '2':
        print('2a')
    else:
        print('3a')

As you can see, else if should be changed to elif, there should be colons after '2' and else, there should be a new line after the else statement, and close the space between print and the parentheses.

You can also check if Power Save Mode on File menu is disabled.

in Swift3 and Swift4 you can change cell size by adding UICollectionViewDelegateFlowLayout and implementing it's like this :

func collectionView(_ collectionView: UICollectionView, layout collectionViewLayout: UICollectionViewLayout, sizeForItemAt indexPath: IndexPath) -> CGSize {
        return CGSize(width: 100, height: 100)
    }

or if create UICollectionView programmatically you can do it like this :

    let layout = UICollectionViewFlowLayout()
                    layout.scrollDirection = .horizontal //this is for direction
                    layout.minimumInteritemSpacing = 0 // this is for spacing between cells
                    layout.itemSize = CGSize(width: view.frame.width, height: view.frame.height) //this is for cell size
let collectionView = UICollectionView(frame: self.view.bounds, collectionViewLayout: layout)

I'm not so thrilled about the InetAddress.getLocalHost().getHostName() solution that you can find so many places on the Internet and indeed also here. That method will get you the hostname as seen from a network perspective. I can see two problems with this:

1. What if the host has multiple network interfaces ? The host may be known on the network by multiple names. The one returned by said method is indeterminate afaik.

2. What if the host is not connected to any network and has no network interfaces ?

All OS'es that I know of have the concept of naming a node/host irrespective of network. Sad that Java cannot return this in an easy way. This would be the environment variable COMPUTERNAME on all versions of Windows and the environment variable HOSTNAME on Unix/Linux/MacOS (or alternatively the output from host command hostname if the HOSTNAME environment variable is not available as is the case in old shells like Bourne and Korn).

I would write a method that would retrieve (depending on OS) those OS vars and only as a last resort use the InetAddress.getLocalHost().getHostName() method. But that's just me.

UPDATE (Unices)

As others have pointed out the HOSTNAME environment variable is typically not available to a Java application on Unix/Linux as it is not exported by default. Hence not a reliable method unless you are in control of the clients. This really sucks. Why isn't there a standard property with this information?

Alas, as far as I can see the only reliable way on Unix/Linux would be to make a JNI call to gethostname() or to use Runtime.exec() to capture the output from the hostname command. I don't particularly like any of these ideas but if anyone has a better idea I'm all ears. (update: I recently came across gethostname4j which seems to be the answer to my prayers).

Long read

I've created a long explanation in another answer on another post. In particular you may want to read it because it attempts to establish some terminology, gives concrete examples of when the InetAddress.getLocalHost().getHostName() solution will fail, and points to the only safe solution that I know of currently, namely gethostname4j.

It's sad that Java doesn't provide a method for obtaining the computername. Vote for JDK-8169296 if you are able to.

Lame answer but: Remember to make sure no proxy is set in a ~/.curlrc file (...).

You can use this(more efficient) too. (https://softwareengineering.stackexchange.com/questions/304445/why-is-s-better-than-for-concatenation)

s += "%s" %(stringfromelsewhere)

You change the title by changing the title of the view controller being displayed:

viewController.title = "some title"

Normally this is done in view did load on the view controller:

override func viewDidLoad() {
    super.viewDidLoad()
    self.title = "some title"
}

However, this only works if you have your view controller embedded in a UINavigationController. I highly recommend doing this instead of creating a navigation bar yourself. If you insist on creating a navigation bar yourself, you can change the title by doing:

navigationBar.topItem.title = "some title"

Addendum:

The important concept is that you are evaluating an expression in your Razor code. The best way to do this (if, for example, you are in a foreach loop) is using a generic method.

The syntax for calling a generic method in Razor is:

@(expression)

In this case, the expression is:

User.Identity.IsAuthenticated ? "auth" : "anon"

Therefore, the solution is:

@(User.Identity.IsAuthenticated ? "auth" : "anon")

This code can be used anywhere in Razor, not just for an html attribute.

See @Kyralessa 's comment for C# Razor Syntax Quick Reference (Phil Haack's blog).

I found this one,

var alertView = UIAlertView();
alertView.addButtonWithTitle("Ok");
alertView.title = "title";
alertView.message = "message";
alertView.show();

not good though, but it works :)

Update:

but I have found on header file as:

extension UIAlertView {
    convenience init(title: String, message: String, delegate: UIAlertViewDelegate?, cancelButtonTitle: String?, otherButtonTitles firstButtonTitle: String, _ moreButtonTitles: String...)
}

somebody may can explain this.

The solution I end up using most is based off of Tomas Petricek's answer. I usually want to do something with both the attribute and property.

var props = from p in this.GetType().GetProperties()
            let attr = p.GetCustomAttributes(typeof(MyAttribute), true)
            where attr.Length == 1
            select new { Property = p, Attribute = attr.First() as MyAttribute};

Check your folder structure where you are executing the command, you should run the command 'ng serve' where there should be a angular.json file in the structure.

angular.json file will be generated by default when we run the command

npm install -g '@angular/cli' ng new Project_name then cd project_folder then, run ng serve. it worked for me

This is easy all you need to do is something like this Grab your contents like this

  $result->get(filed1) = 'some modification';
  $result->get(filed2) = 'some modification2';

Try git config core.fileMode false

From the git config man page:

core.fileMode

If false, the executable bit differences between the index and the working copy are ignored; useful on broken filesystems like FAT. See git-update-index(1).

The default is true, except git-clone(1) or git-init(1) will probe and set core.fileMode false if appropriate when the repository is created.

That true,Mustafa....its working..its point to two layout

1. setContentView(R.layout.your_layout)
2. v23(your_layout).

You should take Button both activity layout...
solve this problem successfully

Two options:

for (let item in MotifIntervention) {
    if (isNaN(Number(item))) {
        console.log(item);
    }
}

Or

Object.keys(MotifIntervention).filter(key => !isNaN(Number(MotifIntervention[key])));

(code in playground)

Edit

String enums look different than regular ones, for example:

enum MyEnum {
    A = "a",
    B = "b",
    C = "c"
}

Compiles into:

var MyEnum;
(function (MyEnum) {
    MyEnum["A"] = "a";
    MyEnum["B"] = "b";
    MyEnum["C"] = "c";
})(MyEnum || (MyEnum = {}));

Which just gives you this object:

{
    A: "a",
    B: "b",
    C: "c"
}

You can get all the keys (["A", "B", "C"]) like this:

Object.keys(MyEnum);

And the values (["a", "b", "c"]):

Object.keys(MyEnum).map(key => MyEnum[key])

Or using Object.values():

Object.values(MyEnum)

The AutoPostBack property is used to set or return whether or not an automatic post back occurs when the user presses "ENTER" or "TAB" in the TextBox control.

If this property is set to TRUE the automatic post back is enabled, otherwise FALSE. Default is FALSE.

Or for what seems like rampant overkill, but is actually simplistic ... Pretty much covers all of your cases, and no empty string or unary concerns.

In the case the first arg is '-v', then do your conditional ps -ef, else in all other cases throw the usage.

#!/bin/sh
case $1 in
  '-v') if [ "$1" = -v ]; then
         echo "`ps -ef | grep -v '\['`"
        else
         echo "`ps -ef | grep '\[' | grep root`"
        fi;;
     *) echo "usage: $0 [-v]"
        exit 1;; #It is good practice to throw a code, hence allowing $? check
esac

If one cares not where the '-v' arg is, then simply drop the case inside a loop. The would allow walking all the args and finding '-v' anywhere (provided it exists). This means command line argument order is not important. Be forewarned, as presented, the variable arg_match is set, thus it is merely a flag. It allows for multiple occurrences of the '-v' arg. One could ignore all other occurrences of '-v' easy enough.

#!/bin/sh

usage ()
 {
  echo "usage: $0 [-v]"
  exit 1
 }

unset arg_match

for arg in $*
 do
  case $arg in
    '-v') if [ "$arg" = -v ]; then
           echo "`ps -ef | grep -v '\['`"
          else
           echo "`ps -ef | grep '\[' | grep root`"
          fi
          arg_match=1;; # this is set, but could increment.
       *) ;;
  esac
done

if [ ! $arg_match ]
 then
  usage
fi

But, allow multiple occurrences of an argument is convenient to use in situations such as:

$ adduser -u:sam -s -f -u:bob -trace -verbose

We care not about the order of the arguments, and even allow multiple -u arguments. Yes, it is a simple matter to also allow:

$ adduser -u sam -s -f -u bob -trace -verbose

You need to add an additional parameter:

$http.get(url).then(
    function(response) {
        console.log('get',response)
    },
    function(data) {
        // Handle error here
    })