Any way of using frames in HTML5?

Now, there are plenty of example of me answering questions with essays on why following validation rules are important. I've also said that sometimes you just have to be a rebel and break the rules, and document the reasons.

You can see in this example that framesets do work in HTML5 still. I had to download the code and add an HTML5 doctype at the top, however. But the frameset element was still recognized, and the desired result was achieved.

Therefore, knowing that using framesets is completely absurd, and knowing that you have to use this as dictated by your professor/teacher, you could just deal with the single validation error in the W3C validator and use both the HTML5 video element as well as the deprecated frameset element.

<!DOCTYPE html>
<html>
    <head>
    </head>
    <!-- frameset is deprecated in html5, but it still works. -->
    <frameset framespacing="0" rows="150,*" frameborder="0" noresize>
        <frame name="top" src="http://www.npscripts.com/framer/demo-top.html" target="top">
        <frame name="main" src="http://www.google.com" target="main">
    </frameset>
</html>

Keep in mind that if it's a project for school, it's most likely not going to be something that will be around in a year or two once the browser vendors remove frameset support for HTML5 completely. Just know that you are right and just do what your teacher/professor asks just to get the grade :)

UPDATE:

The toplevel parent doc uses XHTML and the frame uses HTML5. The validator did not complain about the frameset being illegal, and it didn't complain about the video element.

index.php:

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Frameset//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-frameset.dtd">
<html>
    <head>
    </head>
    <frameset framespacing="0" rows="150,*" frameborder="0" noresize>
        <frame name="top" src="http://www.npscripts.com/framer/demo-top.html" target="top">
        <frame name="main" src="video.html" target="main">
    </frameset>
</html>

video.html:

<!doctype html>
<html>
    <head>
    </head>
    <body>
        <div id="player-container">
            <div class="arrow"></div>
            <div class="player">

                <video id="vid1" width="480" height="267" 
                    poster="http://cdn.kaltura.org/apis/html5lib/kplayer-examples/media/bbb480.jpg"
                    durationHint="33" controls>
                    <source src="http://cdn.kaltura.org/apis/html5lib/kplayer-examples/media/bbb_trailer_iphone.m4v" />

                    <source src="http://cdn.kaltura.org/apis/html5lib/kplayer-examples/media/bbb400p.ogv" />

                </video>

        </div>
    </body>
</html>

Overcoming "Display forbidden by X-Frame-Options"

There is a plugin for Chrome, that drops that header entry (for personal use only):

https://chrome.google.com/webstore/detail/ignore-x-frame-headers/gleekbfjekiniecknbkamfmkohkpodhe/reviews

Meaning of "referencing" and "dereferencing" in C

The context that * is in, confuses the meaning sometimes.

  // when declaring a function
int function(int*); // This function is being declared as a function that takes in an 'address' that holds a number (so int*), it's asking for a 'reference', interchangeably called 'address'. When I 'call'(use) this function later, I better give it a variable-address! So instead of var, or q, or w, or p, I give it the address of var so &var, or &q, or &w, or &p.   

//even though the symbol ' * ' is typically used to mean 'dereferenced variable'(meaning: to use the value at the address of a variable)--despite it's common use, in this case, the symbol means a 'reference', again, in THIS context. (context here being the declaration of a 'prototype'.) 


    //when calling a function
int main(){ 
    function(&var);  // we are giving the function a 'reference', we are giving it an 'address'
  }

So, in the context of declaring a type such as int or char, we would use the dereferencer ' * ' to actually mean the reference (the address), which makes it confusing if you see an error message from the compiler saying: 'expecting char*' which is asking for an address.

In that case, when the * is after a type (int, char, etc.) the compiler is expecting a variable's address. We give it this by using a reference operator, alos called the address-of operator ' & ' before a variable. Even further, in the case I just made up above, the compiler is expecting the address to hold a character value, not a number. (type char * == address of a value that has a character)

int* p;
int *a;   // both are 'pointer' declarations. We are telling the compiler that we will soon give these variables an address (with &).

int c = 10;  //declare and initialize a random variable
//assign the variable to a pointer, we do this so that we can modify the value of c from a different function regardless of the scope of that function (elaboration in a second)

p = c; //ERROR, we assigned a 'value' to this 'pointer'. We need to assign an 'address', a 'reference'.
p = &c; // instead of a value such as: 'q',5,'t', or 2.1 we gave the pointer an 'address', which we could actually print with printf(), and would be something like
//so
p = 0xab33d111; //the address of c, (not specifically this value for the address, it'll look like this though, with the 0x in the beggining, the computer treats these different from regular numbers)
*p = 10; // the value of c

a = &c; // I can still give c another pointer, even though it already has the pointer variable "p"

*a = 10;
 a = 0xab33d111;

Think of each variable as having a position (or an index value if you are familiar with arrays) and a value. It might take some getting used-to to think of each variable having two values to it, one value being it's position, physically stored with electricity in your computer, and a value representing whatever quantity or letter(s) the programmer wants to store.

//Why it's used
int function(b){
    b = b + 1; // we just want to add one to any variable that this function operates on.
} 

int main(){

    int c = 1;  // I want this variable to be 3.

    function(c); 
    function(c);// I call the function I made above twice, because I want c to be 3.

     // this will return c as 1. Even though I called it twice.
     // when you call a function it makes a copy of the variable.
     // so the function that I call "function", made a copy of c, and that function is only changing the "copy" of c, so it doesn't affect the original
}
  //let's redo this whole thing, and use pointers

int function(int* b){ // this time, the function is 'asking' (won't run without) for a variable that 'points' to a number-value (int). So it wants an integer pointer--an address that holds a number.
*b = *b + 1; //grab the value of the address, and add one to the value stored at that address
}

int main(){
    int c = 1; //again, I want this to be three at the end of the program
    int *p = &c; // on the left, I'm declaring a pointer, I'm telling the compiler that I'm about to have this letter point to an certain spot in my computer. Immediately after I used the assignment operator (the ' = ') to assign the address of c to this variable (pointer in this case) p. I do this using the address-of operator (referencer)' & '.
    function(p); // not *p, because that will dereference. which would give an integer, not an integer pointer ( function wants a reference to an int called int*, we aren't going to use *p because that will give the function an int instead of an address that stores an int.

    function(&c); // this is giving the same thing as above, p = the address of c, so we can pass the 'pointer' or we can pass the 'address' that the pointer(variable) is 'pointing','referencing' to. Which is &c. 0xaabbcc1122...


      //now, the function is making a copy of c's address, but it doesn't matter if it's a copy or not, because it's going to point the computer to the exact same spot (hence, The Address), and it will be changed for main's version of c as well.

}

Inside each and every block, it copies the variables (if any) that are passed into (via parameters within "()"s). Within those blocks, the changes to a variable are made to a copy of that variable, the variable uses the same letters but is at a different address (from the original). By using the address "reference" of the original, we can change a variable using a block outside of main, or inside a child of main.

How to create empty data frame with column names specified in R?

Perhaps:

> data.frame(aname=NA, bname=NA)[numeric(0), ]
[1] aname bname
<0 rows> (or 0-length row.names)

Can a foreign key refer to a primary key in the same table?

I think the question is a bit confusing.

If you mean "can foreign key 'refer' to a primary key in the same table?", the answer is a firm yes as some replied. For example, in an employee table, a row for an employee may have a column for storing manager's employee number where the manager is also an employee and hence will have a row in the table like a row of any other employee.

If you mean "can column(or set of columns) be a primary key as well as a foreign key in the same table?", the answer, in my view, is a no; it seems meaningless. However, the following definition succeeds in SQL Server!

create table t1(c1 int not null primary key foreign key references t1(c1))

But I think it is meaningless to have such a constraint unless somebody comes up with a practical example.

AmanS, in your example d_id in no circumstance can be a primary key in Employee table. A table can have only one primary key. I hope this clears your doubt. d_id is/can be a primary key only in department table.

How to call function that takes an argument in a Django template?

You cannot call a function that requires arguments in a template. Write a template tag or filter instead.

What does "ulimit -s unlimited" do?

ulimit -s unlimited lets the stack grow unlimited.

This may prevent your program from crashing if you write programs by recursion, especially if your programs are not tail recursive (compilers can "optimize" those), and the depth of recursion is large.

How do I set the path to a DLL file in Visual Studio?

I know this question had been answered years ago, but for those like me who needed to change where the debugger starts the application, change the command property under Project Properties -> Debugging.

What is the difference between a Shared Project and a Class Library in Visual Studio 2015?

Like others already wrote, in short:

shared project
reuse on the code (file) level, allowing for folder structure and resources as well

pcl
reuse on the assembly level

What was mostly missing from answers here for me is the info on reduced functionality available in a PCL: as an example you have limited file operations (I was missing a lot of File.IO fuctionality in a Xamarin cross-platform project).

In more detail
shared project:
+ Can use #if when targeting multiple platforms (e. g. Xamarin iOS, Android, WinPhone)
+ All framework functionality available for each target project (though has to be conditionally compiled)
o Integrates at compile time
- Slightly larger size of resulting assemblies
- Needs Visual Studio 2013 Update 2 or higher

pcl:
+ generates a shared assembly
+ usable with older versions of Visual Studio (pre-2013 Update 2)
o dynamically linked
- lmited functionality (subset of all projects it is being referenced by)

If you have the choice, I would recommend going for shared project, it is generally more flexible and more powerful. If you know your requirements in advance and a PCL can fulfill them, you might go that route as well. PCL also enforces clearer separation by not allowing you to write platform-specific code (which might not be a good choice to be put into a shared assembly in the first place).

Main focus of both is when you target multiple platforms, else you would normally use just an ordinary library/dll project.

How to go back last page

Since beta 18:

import {Location} from 'angular2/platform/common';

The forked VM terminated without saying properly goodbye. VM crash or System.exit called

Did encounter the same problem as I was trying to compile a maven project set to 1.7 on a windows 10 environment running JAVA = 1.8.

I resolved it by changing the java version from 1.7 to 1.8 as shown below.

 <plugin>
    <groupId>org.apache.maven.plugins</groupId>
    <artifactId>maven-compiler-plugin</artifactId>
    <version>3.3</version>
    <configuration>
      <source>1.8</source>
      <target>1.8</target>
    </configuration>
  </plugin>

Removing first x characters from string?

Another way (depending on your actual needs): If you want to pop the first n characters and save both the popped characters and the modified string:

s = 'lipsum'
n = 3
a, s = s[:n], s[n:]
print(a)
# lip
print(s)
# sum

Redis command to get all available keys?

KEYS pattern

Available since 1.0.0.

Time complexity: O(N) with N being the number of keys in the database, under the assumption that the key names in the database and the given pattern have limited length.

Returns all keys matching pattern.

Warning : This command is not recommended to use because it may ruin performance when it is executed against large databases instead of KEYS you can use SCAN or SETS.

Example of KEYS command to use :

redis> MSET firstname Jack lastname Stuntman age 35
"OK"
redis> KEYS *name*
1) "lastname"
2) "firstname"
redis> KEYS a??
1) "age"
redis> KEYS *
1) "lastname"
2) "age"
3) "firstname"

What's is the difference between train, validation and test set, in neural networks?

In simple words define Training set, Test set, Validation set

Training set: Is used for finding Nearest neighbors. Validation set: Is for finding different k which is applying to train set. Test set: Is used for finding the maximum accuracy and unseen data in future.

How can I detect if this dictionary key exists in C#?

I use a Dictionary and because of the repetetiveness and possible missing keys, I quickly patched together a small method:

 private static string GetKey(IReadOnlyDictionary<string, string> dictValues, string keyValue)
 {
     return dictValues.ContainsKey(keyValue) ? dictValues[keyValue] : "";
 }

Calling it:

var entry = GetKey(dictList,"KeyValue1");

Gets the job done.

Find the PID of a process that uses a port on Windows

PowerShell (Core-compatible) one-liner to ease copypaste scenarios:

netstat -aon | Select-String 8080 | ForEach-Object { $_ -replace '\s+', ',' } | ConvertFrom-Csv -Header @('Empty', 'Protocol', 'AddressLocal', 'AddressForeign', 'State', 'PID') | ForEach-Object { $portProcess = Get-Process | Where-Object Id -eq $_.PID; $_ | Add-Member -NotePropertyName 'ProcessName' -NotePropertyValue $portProcess.ProcessName; Write-Output $_ } | Sort-Object ProcessName, State, Protocol, AddressLocal, AddressForeign | Select-Object  ProcessName, State, Protocol, AddressLocal, AddressForeign | Format-Table

Output:

ProcessName State     Protocol AddressLocal AddressForeign
----------- -----     -------- ------------ --------------
System      LISTENING TCP      [::]:8080    [::]:0
System      LISTENING TCP      0.0.0.0:8080 0.0.0.0:0

Same code, developer-friendly:

$Port = 8080

# Get PID's listening to $Port, as PSObject
$PidsAtPortString = netstat -aon `
  | Select-String $Port
$PidsAtPort = $PidsAtPortString `
  | ForEach-Object { `
      $_ -replace '\s+', ',' `
  } `
  | ConvertFrom-Csv -Header @('Empty', 'Protocol', 'AddressLocal', 'AddressForeign', 'State', 'PID')

# Enrich port's list with ProcessName data
$ProcessesAtPort = $PidsAtPort `
  | ForEach-Object { `
    $portProcess = Get-Process `
      | Where-Object Id -eq $_.PID; `
    $_ | Add-Member -NotePropertyName 'ProcessName' -NotePropertyValue $portProcess.ProcessName; `
    Write-Output $_;
  }

# Show output
$ProcessesAtPort `
  | Sort-Object    ProcessName, State, Protocol, AddressLocal, AddressForeign `
  | Select-Object  ProcessName, State, Protocol, AddressLocal, AddressForeign `
  | Format-Table

IF EXIST C:\directory\ goto a else goto b problems windows XP batch files

If you want to rule out any problems with the else part, try removing the else and place the command on a new line. Like this:

IF EXIST D:\RPS_BACKUP\backups_temp\ goto tempexists
goto tempexistscontinue

How to Copy Text to Clip Board in Android?

int sdk = android.os.Build.VERSION.SDK_INT;

    if (sdk < android.os.Build.VERSION_CODES.HONEYCOMB) {
        android.text.ClipboardManager clipboard = (android.text.ClipboardManager) DetailView.this
                .getSystemService(Context.CLIPBOARD_SERVICE);
        clipboard.setText("" + yourMessage.toString());
        Toast.makeText(AppCstVar.getAppContext(),
                "" + getResources().getString(R.string.txt_copiedtoclipboard),
                Toast.LENGTH_SHORT).show();
    } else {
        android.content.ClipboardManager clipboard = (android.content.ClipboardManager) DetailView.this
                .getSystemService(Context.CLIPBOARD_SERVICE);
        android.content.ClipData clip = android.content.ClipData
                .newPlainText("message", "" + yourMessage.toString());
        clipboard.setPrimaryClip(clip);
        Toast.makeText(AppCstVar.getAppContext(),
                "" + getResources().getString(R.string.txt_copiedtoclipboard),
                Toast.LENGTH_SHORT).show();
    }

Create a dropdown component

Hope this will help to someone. Works fine in Angular 6 with reactive forms. Can operate by keyboard too.

dropdown.component.html

<div class="dropdown-wrapper {{className}} {{isFocused ? 'focus':''}}" [ngClass]="{'is-open':isOpen, 'disabled':isReadOnly}" *ngIf="options" (contextmenu)="$event.stopPropagation();">
  <div class="box" (click)="toggle($event)">
    <ng-container>
      <div class="dropdown-selected" *ngIf="isSelectedValue" l10nTranslate><span>{{options[selected]}}</span></div>
      <div class="dropdown-selected" *ngIf="!isSelectedValue" l10nTranslate><span>{{placeholder}}</span></div>
    </ng-container>
  </div>

  <ul class="dropdown-options" *ngIf="options">
    <li *ngIf="placeholder" (click)="$event.stopPropagation()">{{placeholder}}</li>
    <ng-container>
      <li id="li{{i}}"
        *ngFor="let option of options; let i = index"
        [class.active]="selected === i"
        (click)="optionSelect(option, i, $event)"
        l10nTranslate
      >
        {{option}}
      </li>
    </ng-container>

  </ul>
</div>

dropdown.component.scss

@import "../../../assets/scss/variables";

// DROPDOWN STYLES
.dropdown-wrapper {
    display: -webkit-box;
    display: -ms-flexbox;
    display: flex;
    border: 1px solid #DDDDDD;
    border-radius: 3px;
    cursor: pointer;
    position: relative;
    &.focus{
        border: 1px solid #a8a8a8;
    }
    .box {
        display: -webkit-box;
        display: -ms-flexbox;
        display: flex;
        width: 100%;
    } 

    // SELECTED
    .dropdown-selected {
        height: 30px;
        position: relative;
        padding: 10px 30px 10px 10px;
        display: -webkit-box;
        display: -ms-flexbox;
        display: flex;
        -webkit-box-align: center;
            -ms-flex-align: center;
                align-items: center;
        width: 100%;
        font-size: 12px;
        color: #666666;
        overflow: hidden;
        background-color: #fff;
        &::before {
            content: "";
            position: absolute;
            top: 50%;
            right: 5px;
            -webkit-transform: translateY(-50%);
                    transform: translateY(-50%);
            width: 22px;
            height: 22px;
            background: url('/assets/i/dropdown-open-selector.svg');
            background-size: 22px 22px;
        }
        span {
            white-space: nowrap;
            overflow: hidden;
            text-overflow: ellipsis;
        }
    } 

    // DROPDOWN OPTIONS
    .dropdown-options {
        display: none;
        position: absolute;
        padding: 8px 6px 9px 5px;
        max-height: 261px;
        overflow-y: auto;
        z-index: 999;
        li {
            padding: 10px 25px 10px 10px;
            font-size: $regular-font-size;
            color: $content-text-black;
            position: relative;
            line-height: 10px;
            &:last-child {
                border-bottom: none;
            }
            &:hover {
                background-color: #245A88;
                border-radius: 3px;
                color: #fff;
                border-bottom-color: transparent;
            }
            &:focus{
                background-color: #245A88;
                border-radius: 3px;
                color: #fff;
            }
            &.active {
                background-color: #245A88;
                border-radius: 3px;
                color: #fff;
                border-bottom-color: transparent;
            }
            &:hover {
                background-color: #7898B3
            }
            &.active {
                font-weight: 600;
            }
        }
    }
    &.is-open {
        .dropdown-selected {
            &::before {
                content: "";
                position: absolute;
                top: 50%;
                right: 5px;
                -webkit-transform: translateY(-50%);
                        transform: translateY(-50%);
                width: 22px;
                height: 22px;
                background: url('/assets/i/dropdown-close-selector.svg');
                background-size: 22px 22px;
            }
        }
        .dropdown-options {
            display: -webkit-box;
            display: -ms-flexbox;
            display: flex;
            -webkit-box-orient: vertical;
            -webkit-box-direction: normal;
                -ms-flex-direction: column;
                    flex-direction: column;
            width: 100%;
            top: 32px;
            border-radius: 3px;
            background-color: #ffffff;
            border: 1px solid #DDDDDD;
            -webkit-box-shadow: 0px 3px 11px 0 rgba(1, 2, 2, 0.14);
                    box-shadow: 0px 3px 11px 0 rgba(1, 2, 2, 0.14);
        }
    }
    &.data-input-fields {
        .box {
            height: 35px;
        }
    }
    &.send-email-table-select {
        min-width: 140px;
        border: none;
    }
    &.persoanal-settings {
        width: 80px;
    }
}

div.dropdown-wrapper.disabled
{
  pointer-events: none;
  background-color: #F1F1F1;
  opacity: 0.7;
}

dropdown.component.ts

import { Component, OnInit, Input, Output, EventEmitter, HostListener, forwardRef } from '@angular/core';
import { ControlValueAccessor, NG_VALUE_ACCESSOR } from '@angular/forms';

const noop = () => {
};

export const CUSTOM_INPUT_CONTROL_VALUE_ACCESSOR: any = {
  provide: NG_VALUE_ACCESSOR,
  useExisting: forwardRef(() => DropdownComponent),
  multi: true
};

@Component({
  selector: 'app-dropdown',
  templateUrl: './dropdown.component.html',
  styleUrls: ['./dropdown.component.scss'],
  providers: [CUSTOM_INPUT_CONTROL_VALUE_ACCESSOR]
})
export class DropdownComponent implements OnInit, ControlValueAccessor {

  @Input() options: Array<string>;
  @Input() selected: number;
  @Input() className: string;
  @Input() placeholder: string;
  @Input() isReadOnly = false;
  @Output() optSelect = new EventEmitter();
  isOpen = false;
  selectedOption;


  private onTouchedCallback: () => void = noop;
  private onChangeCallback: (_: any) => void = noop;
  isSelectedValue: boolean;
  key: string;
  isFocused: boolean;

  /**
   *Creates an instance of DropdownComponent.
   * @memberof DropdownComponent
   */

  ngOnInit() {
    // Place default value in dropdown
    if (this.selected) {
      this.placeholder = '';
      this.isOpen = false;
    }
  }

  @HostListener('focus')
  focusHandler() {
    this.selected = 0;
    this.isFocused = true;
  }

  @HostListener('focusout')
  focusOutHandler() {
    this.isFocused = false;
  }

  @HostListener('document:keydown', ['$event'])
  keyPressHandle(event: KeyboardEvent) {

    if (this.isFocused) {
      this.key = event.code;
      switch (this.key) {
        case 'Space':
          this.isOpen = true;
          break;
        case 'ArrowDown':
          if (this.options.length - 1 > this.selected) {
            this.selected = this.selected + 1;
          }
          break;
        case 'ArrowUp':
          if (this.selected > 0) {
            this.selected = this.selected - 1;
          }
          break;
        case 'Enter':
          if (this.selected > 0) {
            this.isSelectedValue = true;
            this.isOpen = false;
            this.onChangeCallback(this.selected);
            this.optSelect.emit(this.options[this.selected]);
          }
          break;
      }
    }

  }

  /**
  * option selection
  * @param {string} selectedOption - text
  * @param {number} idx - current index of item
  * @param {any} event - object
  */
  optionSelect(selectedOption: string, idx, e: any) {
    e.stopPropagation();
    this.selected = idx;
    this.isSelectedValue = true;
    // this.placeholder = '';
    this.isOpen = false;
    this.onChangeCallback(this.selected);
    this.optSelect.emit(selectedOption);
  }

  /**
  * toggle the dropdown
  * @param {any} event object
  */
  toggle(e: any) {
    e.stopPropagation();
    // close all previously opened dropdowns, before open
    const allElems = document.querySelectorAll('.dropdown-wrapper');
    for (let i = 0; i < allElems.length; i++) {
      allElems[i].classList.remove('is-open');
    }
    this.isOpen = !this.isOpen;
    if (this.selected >= 0) {
      document.querySelector('#li' + this.selected).scrollIntoView(true);
    }
  }

  /**
  * dropdown click on outside
  */
  @HostListener('document: click', ['$event'])
  onClick() {
    this.isOpen = false;
  }

  /**
   * Method implemented from ControlValueAccessor and set default selected value
   * @param {*} obj
   * @memberof DropdownComponent
   */
  writeValue(obj: any): void {
    if (obj && obj !== '') {
      this.isSelectedValue = true;
      this.selected = obj;
    } else {
      this.isSelectedValue = false;
    }
  }

  // From ControlValueAccessor interface
  registerOnChange(fn: any) {
    this.onChangeCallback = fn;
  }

  // From ControlValueAccessor interface
  registerOnTouched(fn: any) {
    this.onTouchedCallback = fn;
  }

  setDisabledState?(isDisabled: boolean): void {

  }

}

Usage

<app-dropdown formControlName="type" [options]="types" [placeholder]="captureData.type" [isReadOnly]="isReadOnly">
</app-dropdown>

Options must bind an array as follows. It can change based on the requirement.

types= [
        {
            "id": "1",
            "value": "Type 1"
        },
        {
             "id": "2",
             "value": "Type 2"
        },
        {
              "id": "3",
              "value": "Type 3"
        }]

Could not load file or assembly 'CrystalDecisions.ReportAppServer.CommLayer, Version=13.0.2000.0

For me it was "Prefer 32bit": clearing the checkbox allowed CLR to load Crystal Reports 64bit runtime (the only one installed).

Get querystring from URL using jQuery

To retrieve the entire querystring from the current URL, beginning with the ? character, you can use

location.search

https://developer.mozilla.org/en-US/docs/DOM/window.location

Example:

// URL = https://example.com?a=a%20a&b=b123
console.log(location.search); // Prints "?a=a%20a&b=b123"

In regards to retrieving specific querystring parameters, while although classes like URLSearchParams and URL exist, they aren't supported by Internet Explorer at this time, and should probably be avoided. Instead, you can try something like this:

/**
 * Accepts either a URL or querystring and returns an object associating 
 * each querystring parameter to its value. 
 *
 * Returns an empty object if no querystring parameters found.
 */
function getUrlParams(urlOrQueryString) {
  if ((i = urlOrQueryString.indexOf('?')) >= 0) {
    const queryString = urlOrQueryString.substring(i+1);
    if (queryString) {
      return _mapUrlParams(queryString);
    } 
  }

  return {};
}

/**
 * Helper function for `getUrlParams()`
 * Builds the querystring parameter to value object map.
 *
 * @param queryString {string} - The full querystring, without the leading '?'.
 */
function _mapUrlParams(queryString) {
  return queryString    
    .split('&') 
    .map(function(keyValueString) { return keyValueString.split('=') })
    .reduce(function(urlParams, [key, value]) {
      if (Number.isInteger(parseInt(value)) && parseInt(value) == value) {
        urlParams[key] = parseInt(value);
      } else {
        urlParams[key] = decodeURI(value);
      }
      return urlParams;
    }, {});
}

You can use the above like so:

// Using location.search
let urlParams = getUrlParams(location.search); // Assume location.search = "?a=1&b=2b2"
console.log(urlParams); // Prints { "a": 1, "b": "2b2" }

// Using a URL string
const url = 'https://example.com?a=A%20A&b=1';
urlParams = getUrlParams(url);
console.log(urlParams); // Prints { "a": "A A", "b": 1 }

// To check if a parameter exists, simply do:
if (urlParams.hasOwnProperty('parameterName') { 
  console.log(urlParams.parameterName);
}

CSS3 Transition - Fade out effect

This is the working code for your question.
Enjoy Coding....

<html>
   <head>

      <style>

         .animated {
            background-color: green;
            background-position: left top;
            padding-top:95px;
            margin-bottom:60px;
            -webkit-animation-duration: 10s;animation-duration: 10s;
            -webkit-animation-fill-mode: both;animation-fill-mode: both;
         }

         @-webkit-keyframes fadeOut {
            0% {opacity: 1;}
            100% {opacity: 0;}
         }

         @keyframes fadeOut {
            0% {opacity: 1;}
            100% {opacity: 0;}
         }

         .fadeOut {
            -webkit-animation-name: fadeOut;
            animation-name: fadeOut;
         }
      </style>

   </head>
   <body>

      <div id="animated-example" class="animated fadeOut"></div>

   </body>
</html>

How to show matplotlib plots in python

plt.plot(X,y) function just draws the plot on the canvas. In order to view the plot, you have to specify plt.show() after plt.plot(X,y). So,

import matplotlib.pyplot as plt
X = //your x
y = //your y
plt.plot(X,y)
plt.show()

How do I change selected value of select2 dropdown with JqGrid?

do this

 $('select#id').val(selectYear).select2();

if statements matching multiple values

Alternatively, and this would give you more flexibility if testing for values other than 1 or 2 in future, is to use a switch statement

switch(value)
{
case 1:
case 2:
   return true;
default:
   return false
}

VBA copy cells value and format

This page from Microsoft's Excel VBA documentation helped me: https://docs.microsoft.com/en-us/office/vba/api/excel.xlpastetype

It gives a bunch of options to customize how you paste. For instance, you could xlPasteAll (probably what you're looking for), or xlPasteAllUsingSourceTheme, or even xlPasteAllExceptBorders.

How to get current user who's accessing an ASP.NET application?

If you're using membership you can do: Membership.GetUser()

Your code is returning the Windows account which is assigned with ASP.NET.

Additional Info Edit: You will want to include System.Web.Security

using System.Web.Security

fstream won't create a file

This will do:

#include <fstream>
#include <iostream>
using std::fstream;

int main(int argc, char *argv[]) {
    fstream file;
    file.open("test.txt",std::ios::out);
    file << fflush;
    file.close();
}

Create a HTML table where each TR is a FORM

If all of these rows are related and you need to alter the tabular data ... why not just wrap the entire table in a form, and change GET to POST (unless you know that you're not going to be sending more than the max amount of data a GET request can send).

(That's assuming, of course, that all of the data is going to the same place.)

<form method="POST" action="your_action">
<table>
<tr>
<td><input type="text" name="r1c1" value="" /></td>
<!-- ... snip ... -->
</tr>
<!-- ... repeat as needed ... -->
</table>
</form>

How to calculate UILabel height dynamically?

CGSize maxSize = CGSizeMake(lbl.frame.size.width, CGFLOAT_MAX);
CGSize requiredSize = [lbl sizeThatFits:maxSize];
CGFloat height=requiredSize.height

how to save canvas as png image?

FileSaver.js should be able to help you here.

var canvas = document.getElementById("my-canvas");
// draw to canvas...
canvas.toBlob(function(blob) {
    saveAs(blob, "pretty image.png");
});

What is a 'NoneType' object?

Your error's occurring due to something like this:
>>> None + "hello world" Traceback (most recent call last): File "<stdin>", line 1, in <module> TypeError: unsupported operand type(s) for +: 'NoneType' and 'str'>>>

Python's None object is roughly equivalent to null, nil, etc. in other languages.

What's the best way to identify hidden characters in the result of a query in SQL Server (Query Analyzer)?

select myfield, CAST(myfield as varbinary(max)) ...

Passing base64 encoded strings in URL

Yes and no.

The basic charset of base64 may in some cases collide with traditional conventions used in URLs. But many of base64 implementations allow you to change the charset to match URLs better or even come with one (like Python's urlsafe_b64encode()).

Another issue you may be facing is the limit of URL length or rather — lack of such limit. Because standards do not specify any maximum length, browsers, servers, libraries and other software working with HTTP protocol may define its' own limits.

need to add a class to an element

You can use result.className = 'red';, but you can also use result.classList.add('red');. The .classList.add(str) way is usually easier if you need to add a class in general, and don't want to check if the class is already in the list of classes.

Angular2 change detection: ngOnChanges not firing for nested object

In Case of Arrays you can do it like this:

In .ts file (Parent component) where you are updating your rawLapsData do it like this:

rawLapsData = somevalue; // change detection will not happen

Solution:

rawLapsData = {...somevalue}; //change detection will happen

and ngOnChanges will called in child component

If (Array.Length == 0)

do you mean empty or null, two different things,

if the array is instantiated but empty, then length is correct, if it has not been instantiated then test vs null

How do you round a number to two decimal places in C#?

Here's some examples:

decimal a = 1.994444M;

Math.Round(a, 2); //returns 1.99

decimal b = 1.995555M;

Math.Round(b, 2); //returns 2.00

You might also want to look at bankers rounding / round-to-even with the following overload:

Math.Round(a, 2, MidpointRounding.ToEven);

There's more information on it here.

Check if Key Exists in NameValueCollection

queryItems.AllKeys.Contains(key)

Be aware that key may not be unique and that the comparison is usually case sensitive. If you want to just get the value of the first matching key and not bothered about case then use this:

        public string GetQueryValue(string queryKey)
        {
            foreach (string key in QueryItems)
            {
                if(queryKey.Equals(key, StringComparison.OrdinalIgnoreCase))
                    return QueryItems.GetValues(key).First(); // There might be multiple keys of the same name, but just return the first match
            }
            return null;
        }

How to include js file in another js file?

It is not possible directly. You may as well write some preprocessor which can handle that.

If I understand it correctly then below are the things that can be helpful to achieve that:

Use a pre-processor which will run through your JS files for example looking for patterns like "@import somefile.js" and replace them with the content of the actual file. Nicholas Zakas(Yahoo) wrote one such library in Java which you can use (http://www.nczonline.net/blog/2009/09/22/introducing-combiner-a-javascriptcss-concatenation-tool/)
If you are using Ruby on Rails then you can give Jammit asset packaging a try, it uses assets.yml configuration file where you can define your packages which can contain multiple files and then refer them in your actual webpage by the package name.
Try using a module loader like RequireJS or a script loader like LabJs with the ability to control the loading sequence as well as taking advantage of parallel downloading.

JavaScript currently does not provide a "native" way of including a JavaScript file into another like CSS ( @import ), but all the above mentioned tools/ways can be helpful to achieve the DRY principle you mentioned. I can understand that it may not feel intuitive if you are from a Server-side background but this is the way things are. For front-end developers this problem is typically a "deployment and packaging issue".

Hope it helps.

VBA general way for pulling data out of SAP

This all depends on what sort of access you have to your SAP system. An ABAP program that exports the data and/or an RFC that your macro can call to directly get the data or have SAP create the file is probably best.

However as a general rule people looking for this sort of answer are looking for an immediate solution that does not require their IT department to spend months customizing their SAP system.

In that case you probably want to use SAP GUI Scripting. SAP GUI scripting allows you to automate the Windows SAP GUI in much the same way as you automate Excel. In fact you can call the SAP GUI directly from an Excel macro. Read up more on it here. The SAP GUI has a macro recording tool much like Excel does. It records macros in VBScript which is nearly identical to Excel VBA and can usually be copied and pasted into an Excel macro directly.

Example Code

Here is a simple example based on a SAP system I have access to.

Public Sub SimpleSAPExport()
  Set SapGuiAuto  = GetObject("SAPGUI") 'Get the SAP GUI Scripting object
  Set SAPApp = SapGuiAuto.GetScriptingEngine 'Get the currently running SAP GUI 
  Set SAPCon = SAPApp.Children(0) 'Get the first system that is currently connected
  Set session = SAPCon.Children(0) 'Get the first session (window) on that connection

  'Start the transaction to view a table
  session.StartTransaction "SE16"

  'Select table T001
  session.findById("wnd[0]/usr/ctxtDATABROWSE-TABLENAME").Text = "T001"
  session.findById("wnd[0]/tbar[1]/btn[7]").Press

  'Set our selection criteria
  session.findById("wnd[0]/usr/txtMAX_SEL").text = "2"
  session.findById("wnd[0]/tbar[1]/btn[8]").press

  'Click the export to file button
  session.findById("wnd[0]/tbar[1]/btn[45]").press

  'Choose the export format
  session.findById("wnd[1]/usr/subSUBSCREEN_STEPLOOP:SAPLSPO5:0150/sub:SAPLSPO5:0150/radSPOPLI-SELFLAG[1,0]").select
  session.findById("wnd[1]/tbar[0]/btn[0]").press

  'Choose the export filename
  session.findById("wnd[1]/usr/ctxtDY_FILENAME").text = "test.txt"
  session.findById("wnd[1]/usr/ctxtDY_PATH").text = "C:\Temp\"

  'Export the file
  session.findById("wnd[1]/tbar[0]/btn[0]").press
End Sub

Script Recording

To help find the names of elements such aswnd[1]/tbar[0]/btn[0] you can use script recording. Click the customize local layout button, it probably looks a bit like this:
Then find the Script Recording and Playback menu item.

Within that the More button allows you to see/change the file that the VB Script is recorded to. The output format is a bit messy, it records things like selecting text, clicking inside a text field, etc.

Edit: Early and Late binding

The provided script should work if copied directly into a VBA macro. It uses late binding, the line Set SapGuiAuto = GetObject("SAPGUI") defines the SapGuiAuto object.

If however you want to use early binding so that your VBA editor might show the properties and methods of the objects you are using, you need to add a reference to sapfewse.ocx in the SAP GUI installation folder.

Update multiple columns in SQL

I'd like to share with you how I address this kind of question. My case is slightly different as the result of table2 is dynamic and the column numbers may be less than that of table1. But the concept is the same.

First, get the result of table2.

Next, unpivot it.

Then write the update query using dynamic SQL. Sample code is written for testing 2 simple tables - tblA and tblB

--CREATE TABLE tblA(id int, col1 VARCHAR(25), col2 VARCHAR(25), col3 VARCHAR(25), col4 VARCHAR(25))
--CREATE TABLE tblB(id int, col1 VARCHAR(25), col2 VARCHAR(25), col3 VARCHAR(25), col4 VARCHAR(25))
--INSERT INTO tblA(id, col1, col2, col3, col4)
--VALUES(1,'A1','A2','A3','A4')
--INSERT INTO tblB(id, col1, col2, col3, col4)
--VALUES(1,'B1','B2','B3','B4')

DECLARE @id VARCHAR(10) = 1, @TSQL NVARCHAR(MAX)
DECLARE @tblPivot TABLE(    
    colName VARCHAR(255),
    val VARCHAR(255)
)

INSERT INTO @tblPivot
SELECT colName, val
FROM tblB
UNPIVOT
(
    val
    FOR colName IN (col1, col2, col3, col4)
) unpiv
WHERE id = @id

SELECT @TSQL = COALESCE(@TSQL + '''
,','') + colName + ' = ''' + val
FROM @tblPivot

SET @TSQL = N'UPDATE tblA
SET ' + @TSQL + ''' 
WHERE id = ' + @id
PRINT @TSQL
--EXEC SP_EXECUTESQL @TSQL

PRINT @TSQL result:

Why is the jquery script not working?

This may not be the answer you are looking for, but may help others whose jquery is not working properly, or working sometimes and not at other times.

This could be because your jquery has not yet loaded and you have started to interact with the page. Either put jquery on top in head (probably not a very great idea) or use a loader or spinner to stop the user from interacting with the page until the entire jquery has loaded.

How to enable file upload on React's Material UI simple input?

newer MUI version:

<input
  accept="image/*"
  className={classes.input}
  style={{ display: 'none' }}
  id="raised-button-file"
  multiple
  type="file"
/>
<label htmlFor="raised-button-file">
  <Button variant="raised" component="span" className={classes.button}>
    Upload
  </Button>
</label>

What is Python Whitespace and how does it work?

Every programming language has its own way of structuring the code.
whenever you write a block of code, it has to be organised in a way to be understood by everyone.

Usually used in conditional and classes and defining the definition.
It represents the parent, child and grandchild and further.

Example:

def example()
    print "name"
    print "my name"
example()

Here you can say example() is a parent and others are children.

How to change the size of the radio button using CSS?

You can control radio button's size with css style:

style="height:35px; width:35px;"

This directly controls the radio button size.

<input type="radio" name="radio" value="value" style="height:35px; width:35px; vertical-align: middle;">

How to display Woocommerce Category image?

get_woocommerce_term_meta is depricated since Woo 3.6.0.

so change

$thumbnail_id = get_woocommerce_term_meta($value->term_id, 'thumbnail_id', true );

into: ($value->term_id should be woo category id)

get_term_meta($value->term_id, 'thumbnail_id', true)

see docs for details: https://docs.woocommerce.com/wc-apidocs/function-get_woocommerce_term_meta.html

How should I cast in VB.NET?

According to the certification exam you should use Convert.ToXXX() whenever possible for simple conversions because it optimizes performance better than CXXX conversions.

SQL Group By with an Order By

You can get around this limit with the deprecated syntax: ORDER BY 1 DESC

This syntax is not deprecated at all, it's E121-03 from SQL99.

change image opacity using javascript

You could use Jquery indeed or plain good old javascript:

var opacityPercent=30;
document.getElementById("id").style.cssText="opacity:0."+opacityPercent+"; filter:progid:DXImageTransform.Microsoft.Alpha(style=0,opacity="+opacityPercent+");";

You put this in a function that you call on a setTimeout until the desired opacity is reached

How can I merge properties of two JavaScript objects dynamically?

_x000D_

function extend(o, o1, o2){_x000D_
    if( !(o instanceof Object) ) o = {};_x000D_
_x000D_
    copy(o, o1);_x000D_
    if( o2 )_x000D_
        copy(o, o2)_x000D_
_x000D_
    function isObject(obj) {_x000D_
        var type = Object.prototype.toString.call(obj);_x000D_
        return obj === Object(obj) && type != '[object Array]' && type != '[object Function]';_x000D_
    };_x000D_
_x000D_
    function copy(a,b){_x000D_
        // copy o2 to o_x000D_
        for( var key in b )_x000D_
            if( b.hasOwnProperty(key) ){_x000D_
                if( isObject(b[key]) ){_x000D_
                    if( !isObject(a[key]) )_x000D_
                        a[key] = Object.assign({}, b[key]); _x000D_
                    else copy(a[key], b[key])_x000D_
                }_x000D_
                else_x000D_
                    a[key] = b[key];_x000D_
            }_x000D_
    }_x000D_
_x000D_
    return o;_x000D_
};_x000D_
_x000D_
_x000D_
var o1 = {a:{foo:1}, b:1},_x000D_
    o2 = {a:{bar:2}, b:[1], c:()=>{}},_x000D_
    newMerged = extend({}, o1, o2);_x000D_
    _x000D_
console.log( newMerged )_x000D_
console.log( o1 )_x000D_
console.log( o2 )

_x000D_

What's the difference between event.stopPropagation and event.preventDefault?

Event.preventDefault- stops browser default behaviour. Now comes what is browser default behaviour. Assume you have a anchor tag and it has got a href attribute and this anchor tag is nested inside a div tag which has got a click event. Default behaviour of anchor tag is when clicked on the anchor tag it should navigate, but what event.preventDefault does is it stops the navigation in this case. But it never stops the bubbling of event or escalation of event i.e

<div class="container">
 <a href="#" class="element">Click Me!</a>
</div>

$('.container').on('click', function(e) {
 console.log('container was clicked');
});

$('.element').on('click', function(e) {
  e.preventDefault(); // Now link won't go anywhere
  console.log('element was clicked');
});

The result will be

"element was clicked"

"container was clicked"

Now event.StopPropation it stops bubbling of event or escalation of event. Now with above example

$('.container').on('click', function(e) {
  console.log('container was clicked');
});

$('.element').on('click', function(e) {
  e.preventDefault(); // Now link won't go anywhere
  e.stopPropagation(); // Now the event won't bubble up
 console.log('element was clicked');
});

Result will be

"element was clicked"

For more info refer this link https://codeplanet.io/preventdefault-vs-stoppropagation-vs-stopimmediatepropagation/

Check if a value is an object in JavaScript

This will work. It is a function that returns true, false, or possibly null.

_x000D_

const isObject = obj => obj && obj.constructor && obj.constructor === Object;_x000D_
_x000D_
console.log(isObject({})); // true_x000D_
console.log(isObject([])); // false_x000D_
console.log(isObject(new Function)); // false_x000D_
console.log(isObject(new Number(123))); // false_x000D_
console.log(isObject(null)); // null

_x000D_

How can I replace non-printable Unicode characters in Java?

You may be interested in the Unicode categories "Other, Control" and possibly "Other, Format" (unfortunately the latter seems to contain both unprintable and printable characters).

In Java regular expressions you can check for them using \p{Cc} and \p{Cf} respectively.

Is it possible to create static classes in PHP (like in C#)?

You can have static classes in PHP but they don't call the constructor automatically (if you try and call self::__construct() you'll get an error).

Therefore you'd have to create an initialize() function and call it in each method:

<?php

class Hello
{
    private static $greeting = 'Hello';
    private static $initialized = false;

    private static function initialize()
    {
        if (self::$initialized)
            return;

        self::$greeting .= ' There!';
        self::$initialized = true;
    }

    public static function greet()
    {
        self::initialize();
        echo self::$greeting;
    }
}

Hello::greet(); // Hello There!


?>

Else clause on Python while statement

My answer will focus on WHEN we can use while/for-else.

At the first glance, it seems there is no different when using

while CONDITION:
    EXPRESSIONS
print 'ELSE'
print 'The next statement'

and

while CONDITION:
    EXPRESSIONS
else:
    print 'ELSE'
print 'The next statement'

Because the print 'ELSE' statement seems always executed in both cases (both when the while loop finished or not run).

Then, it's only different when the statement print 'ELSE' will not be executed. It's when there is a breakinside the code block under while

In [17]: i = 0

In [18]: while i < 5:
    print i
    if i == 2:
        break
    i = i +1
else:
    print 'ELSE'
print 'The next statement'
   ....:
0
1
2
The next statement

If differ to:

In [19]: i = 0

In [20]: while i < 5:
    print i
    if i == 2:
        break
    i = i +1
print 'ELSE'
print 'The next statement'
   ....:
0
1
2
ELSE
The next statement

return is not in this category, because it does the same effect for two above cases.

exception raise also does not cause difference, because when it raises, where the next code will be executed is in exception handler (except block), the code in else clause or right after the while clause will not be executed.

How to change the date format of a DateTimePicker in vb.net

Use:

dateTimePicker.Value.ToString("yyyy/MM/dd")

Refer to the following link:

http://www.vbdotnetforums.com/schedule-time/15001-datetimepicker-format.html

vim - How to delete a large block of text without counting the lines?

There are several possibilities, what's best depends on the text you work on.

Two possibilities come to mind:

switch to visual mode (V, S-V, ...), select the text with cursor movement and press d
delete a whole paragraph with: dap

How to clear https proxy setting of NPM?

I think it's not http-proxy but proxy:

npm config set proxy="http://yourproxyhere"

JavaScript Adding an ID attribute to another created Element

You set an element's id by setting its corresponding property:

myPara.id = ID;

How to implement a property in an interface

You mean like this?

class MyResourcePolicy : IResourcePolicy {
    private string version;

    public string Version {
        get {
            return this.version;
        }
        set {
            this.version = value;
        }
    }
}

How to squash all git commits into one?

create a backup

git branch backup

reset to specified commit

git reset --soft <#root>

then add all files to staging

git add .

commit without updating the message

git commit --amend --no-edit

push new branch with squashed commits to repo

git push -f

Invariant Violation: Could not find "store" in either the context or props of "Connect(SportsDatabase)"

This happened to me when I upgraded. I had to downgrade back.

react-redux ^5.0.6 ? ^7.1.3

Printing integer variable and string on same line in SQL

Numbers have higher precedence than strings so of course the + operators want to convert your strings into numbers before adding.

You could do:

print 'There are ' + CONVERT(varchar(10),@Number) +
      ' alias combinations did not match a record'

or use the (rather limited) formatting facilities of RAISERROR:

RAISERROR('There are %i alias combinations did not match a record',10,1,@Number)
WITH NOWAIT

Java.lang.NoClassDefFoundError: com/fasterxml/jackson/databind/exc/InvalidDefinitionException

Replace the dependency in the POM.xml file

<dependency>
  <groupId>com.fasterxml.jackson.core</groupId>
  <artifactId>jackson-core</artifactId>
  <version>2.2.3</version>
</dependency>

By the dependency

    <dependency>
        <groupId>com.fasterxml.jackson.core</groupId>
        <artifactId>jackson-databind</artifactId>
        <version>2.9.4</version>
    </dependency>

Random float number generation

#include <cstdint>
#include <cstdlib>
#include <ctime>

using namespace std;

/* single precision float offers 24bit worth of linear distance from 1.0f to 0.0f */
float getval() {
    /* rand() has min 16bit, but we need a 24bit random number. */
    uint_least32_t r = (rand() & 0xffff) + ((rand() & 0x00ff) << 16);
    /* 5.9604645E-8 is (1f - 0.99999994f), 0.99999994f is the first value less than 1f. */
    return (double)r * 5.9604645E-8;
}

int main()
{
    srand(time(NULL));
...

I couldn't post two answers, so here is the second solution. log2 random numbers, massive bias towards 0.0f but it's truly a random float 1.0f to 0.0f.

#include <cstdint>
#include <cstdlib>
#include <ctime>

using namespace std;

float getval () {
    union UNION {
        uint32_t i;
        float f;
    } r;
    /* 3 because it's 0011, the first bit is the float's sign.
     * Clearing the second bit eliminates values > 1.0f.
     */
    r.i = (rand () & 0xffff) + ((rand () & 0x3fff) << 16);
    return r.f;
}

int main ()
{
    srand (time (NULL));
...

Calendar Recurring/Repeating Events - Best Storage Method

While the proposed solutions work, I was trying to implement with Full Calendar and it would require over 90 database calls for each view (as it loads current, previous, and next month), which, I wasn't too thrilled about.

I found an recursion library https://github.com/tplaner/When where you simply store the rules in the database and one query to pull all the relevant rules.

Hopefully this will help someone else, as I spent so many hours trying to find a good solution.

Edit: This Library is for PHP

Concrete Javascript Regex for Accented Characters (Diacritics)

How about this?

/^[a-zA-ZÀ-ÖØ-öø-ÿ]+$/

Python logging not outputting anything

The default logging level is warning. Since you haven't changed the level, the root logger's level is still warning. That means that it will ignore any logging with a level that is lower than warning, including debug loggings.

This is explained in the tutorial:

import logging
logging.warning('Watch out!') # will print a message to the console
logging.info('I told you so') # will not print anything

The 'info' line doesn't print anything, because the level is higher than info.

To change the level, just set it in the root logger:

'root':{'handlers':('console', 'file'), 'level':'DEBUG'}

In other words, it's not enough to define a handler with level=DEBUG, the actual logging level must also be DEBUG in order to get it to output anything.

Correct way to find max in an Array in Swift

In Swift 2.0, the minElement and maxElement become methods of SequenceType protocol, you should call them like:

let a = [1, 2, 3]
print(a.maxElement()) //3
print(a.minElement()) //1

Using maxElement as a function like maxElement(a) is unavailable now.

The syntax of Swift is in flux, so I can just confirm this in Xcode version7 beta6.

It may be modified in the future, so I suggest that you'd better check the doc before you use these methods.

how to find my angular version in my project?

define VERSION variable and import version into it.

import { VERSION } from '@angular/core';

Now you can use VERSION variable in your code to print version For example,

console.log(VERSION.full);

How to call code behind server method from a client side JavaScript function?

// include jquery.js
//javascript function
var a1="aaa";
var b1="bbb";
                         **pagename/methodname**     *parameters*
CallServerFunction("Default.aspx/FunPubGetTasks", "{a:'" + a1+ "',b:'" + b1+ "'}",
            function(result)
            {

            }
);
function CallServerFunction(StrPriUrl,ObjPriData,CallBackFunction)
 {

    $.ajax({
        type: "post",
        url: StrPriUrl,
        contentType: "application/json; charset=utf-8",
        data: ObjPriData,
        dataType: "json",
        success: function(result) 
        {
            if(CallBackFunction!=null && typeof CallBackFunction !='undefined')
            {
                CallBackFunction(result);
            }

        },
        error: function(result) 
        {
            alert('error occured');
            alert(result.responseText);
            window.location.href="FrmError.aspx?Exception="+result.responseText;
        },
        async: true
    });
 }

//page name is Default.aspx & FunPubGetTasks method
///your code behind function
     [System.Web.Services.WebMethod()]
        public static object FunPubGetTasks(string a, string b)
        {
            //return Ienumerable or array   
        }

grep from tar.gz without extracting [faster one]

If you have zgrep you can use

zgrep -a string file.tar.gz

sudo: port: command not found

First, you might need to edit your system's PATH

sudo vi /etc/paths

Add 2 following lines:

/opt/local/bin
/opt/local/sbin

Reboot your terminal

Slack clean all messages (~8K) in a channel

Tip: if you gonna use the slack cleaner https://github.com/kfei/slack-cleaner

You will need to generate a token: https://api.slack.com/custom-integrations/legacy-tokens

How do I delete all messages from a single queue using the CLI?

IMPORTANT NOTE: This will delete all users and config.

ALERT !!

I don't suggest this answer until unless you want to delete data from all of the queues, including users and configs. Just Reset it !!!

rabbitmqctl stop_app
rabbitmqctl reset
rabbitmqctl start_app

Getting the current Fragment instance in the viewpager

Best way to do this, just call CallingFragmentName fragment = (CallingFragmentName) viewPager .getAdapter() .instantiateItem(viewPager, viewPager.getCurrentItem()); It will re-instantiate your calling Fragment, so that it will not throw null pointer exception and call any method of that fragment.

Javascript string replace with regex to strip off illegal characters

Put them in brackets []:

var cleanString = dirtyString.replace(/[\|&;\$%@"<>\(\)\+,]/g, "");

Best practices for SQL varchar column length

Whenever I set up a new SQL table I feel the same way about 2^n being more "even"... but to sum up the answers here, there is no significant impact on storage space simply by defining varchar(2^n) or even varchar(MAX).

That said, you should still anticipate the potential implications on storage and performance when setting a high varchar() limit. For example, let's say you create a varchar(MAX) column to hold product descriptions with full-text indexing. If 99% of descriptions are only 500 characters long, and then suddenly you get somebody who replaces said descriptions with wikipedia articles, you may notice unanticipated significant storage and performance hits.

Another thing to consider from Bill Karwin:

There's one possible performance impact: in MySQL, temporary tables and MEMORY tables store a VARCHAR column as a fixed-length column, padded out to its maximum length. If you design VARCHAR columns much larger than the greatest size you need, you will consume more memory than you have to. This affects cache efficiency, sorting speed, etc.

Basically, just come up with reasonable business constraints and error on a slightly larger size. As @onedaywhen pointed out, family names in UK are usually between 1-35 characters. If you decide to make it varchar(64), you're not really going to hurt anything... unless you're storing this guy's family name that's said to be up to 666 characters long. In that case, maybe varchar(1028) makes more sense.

And in case it's helpful, here's what varchar 2^5 through 2^10 might look like if filled:

varchar(32)     Lorem ipsum dolor sit amet amet.

varchar(64)     Lorem ipsum dolor sit amet, consectetur adipiscing elit. Donecie

varchar(128)    Lorem ipsum dolor sit amet, consectetur adipiscing elit. Donecie
                vestibulum massa. Nullam dignissim elementum molestie. Vehiculas

varchar(256)    Lorem ipsum dolor sit amet, consectetur adipiscing elit. Donecie
                vestibulum massa. Nullam dignissim elementum molestie. Vehiculas
                velit metus, sit amet tristique purus condimentum eleifend. Quis
                que mollis magna vel massa malesuada bibendum. Proinde tincidunt

varchar(512)    Lorem ipsum dolor sit amet, consectetur adipiscing elit. Donecie
                vestibulum massa. Nullam dignissim elementum molestie. Vehiculas
                velit metus, sit amet tristique purus condimentum eleifend. Quis
                que mollis magna vel massa malesuada bibendum. Proinde tincidunt
                dolor tellus, sit amet porta neque varius vitae. Seduse molestie
                lacus id lacinia tempus. Vestibulum accumsan facilisis lorem, et
                mollis diam pretium gravida. In facilisis vitae tortor id vulput
                ate. Proin ornare arcu in sollicitudin pharetra. Crasti molestie

varchar(1024)   Lorem ipsum dolor sit amet, consectetur adipiscing elit. Donecie
                vestibulum massa. Nullam dignissim elementum molestie. Vehiculas
                velit metus, sit amet tristique purus condimentum eleifend. Quis
                que mollis magna vel massa malesuada bibendum. Proinde tincidunt
                dolor tellus, sit amet porta neque varius vitae. Seduse molestie
                lacus id lacinia tempus. Vestibulum accumsan facilisis lorem, et
                mollis diam pretium gravida. In facilisis vitae tortor id vulput
                ate. Proin ornare arcu in sollicitudin pharetra. Crasti molestie
                dapibus leo lobortis eleifend. Vivamus vitae diam turpis. Vivamu
                nec tristique magna, vel tincidunt diam. Maecenas elementum semi
                quam. In ut est porttitor, sagittis nulla id, fermentum turpist.
                Curabitur pretium nibh a imperdiet cursus. Sed at vulputate este
                proin fermentum pretium justo, ac malesuada eros et Pellentesque
                vulputate hendrerit molestie. Aenean imperdiet a enim at finibus
                fusce ut ullamcorper risus, a cursus massa. Nunc non dapibus vel
                Lorem ipsum dolor sit amet, consectetur Praesent ut ultrices sit

Simplest SOAP example

There are many quirks in the way browsers handle XMLHttpRequest, this JS code will work across all browsers:
https://github.com/ilinsky/xmlhttprequest

This JS code converts XML into easy to use JavaScript objects:
http://www.terracoder.com/index.php/xml-objectifier

The JS code above can be included in the page to meet your no external library requirement.

var symbol = "MSFT"; 
var xmlhttp = new XMLHttpRequest();
xmlhttp.open("POST", "http://www.webservicex.net/stockquote.asmx?op=GetQuote",true);
xmlhttp.onreadystatechange=function() {
 if (xmlhttp.readyState == 4) {
  alert(xmlhttp.responseText);
  // http://www.terracoder.com convert XML to JSON 
  var json = XMLObjectifier.xmlToJSON(xmlhttp.responseXML);
  var result = json.Body[0].GetQuoteResponse[0].GetQuoteResult[0].Text;
  // Result text is escaped XML string, convert string to XML object then convert to JSON object
  json = XMLObjectifier.xmlToJSON(XMLObjectifier.textToXML(result));
  alert(symbol + ' Stock Quote: $' + json.Stock[0].Last[0].Text); 
 }
}
xmlhttp.setRequestHeader("SOAPAction", "http://www.webserviceX.NET/GetQuote");
xmlhttp.setRequestHeader("Content-Type", "text/xml");
var xml = '<?xml version="1.0" encoding="utf-8"?>' +
 '<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" ' +
                'xmlns:xsd="http://www.w3.org/2001/XMLSchema" ' +
                'xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">' + 
   '<soap:Body> ' +
     '<GetQuote xmlns="http://www.webserviceX.NET/"> ' +
       '<symbol>' + symbol + '</symbol> ' +
     '</GetQuote> ' +
   '</soap:Body> ' +
 '</soap:Envelope>';
xmlhttp.send(xml);
// ...Include Google and Terracoder JS code here...

Two other options:

JavaScript SOAP client:
http://www.guru4.net/articoli/javascript-soap-client/en/
Generate JavaScript from a WSDL:
https://cwiki.apache.org/confluence/display/CXF20DOC/WSDL+to+Javascript

Pandas count(distinct) equivalent

I believe this is what you want:

table.groupby('YEARMONTH').CLIENTCODE.nunique()

Example:

In [2]: table
Out[2]: 
   CLIENTCODE  YEARMONTH
0           1     201301
1           1     201301
2           2     201301
3           1     201302
4           2     201302
5           2     201302
6           3     201302

In [3]: table.groupby('YEARMONTH').CLIENTCODE.nunique()
Out[3]: 
YEARMONTH
201301       2
201302       3

.gitignore for Visual Studio Projects and Solutions

On Visual Studio 2015 Update 3, and with Git extension updated as of today (2016-10-24), the .gitignore generated by Visual Studio is:

## Ignore Visual Studio temporary files, build results, and
## files generated by popular Visual Studio add-ons.

# User-specific files
*.suo
*.user
*.userosscache
*.sln.docstates

# User-specific files (MonoDevelop/Xamarin Studio)
*.userprefs

# Build results
[Dd]ebug/
[Dd]ebugPublic/
[Rr]elease/
[Rr]eleases/
[Xx]64/
[Xx]86/
[Bb]uild/
bld/
[Bb]in/
[Oo]bj/

# Visual Studio 2015 cache/options directory
.vs/
# Uncomment if you have tasks that create the project's static files in wwwroot
#wwwroot/

# MSTest test Results
[Tt]est[Rr]esult*/
[Bb]uild[Ll]og.*

# NUNIT
*.VisualState.xml
TestResult.xml

# Build Results of an ATL Project
[Dd]ebugPS/
[Rr]eleasePS/
dlldata.c

# DNX
project.lock.json
artifacts/

*_i.c
*_p.c
*_i.h
*.ilk
*.meta
*.obj
*.pch
*.pdb
*.pgc
*.pgd
*.rsp
*.sbr
*.tlb
*.tli
*.tlh
*.tmp
*.tmp_proj
*.log
*.vspscc
*.vssscc
.builds
*.pidb
*.svclog
*.scc

# Chutzpah Test files
_Chutzpah*

# Visual C++ cache files
ipch/
*.aps
*.ncb
*.opendb
*.opensdf
*.sdf
*.cachefile
*.VC.db

# Visual Studio profiler
*.psess
*.vsp
*.vspx
*.sap

# TFS 2012 Local Workspace
$tf/

# Guidance Automation Toolkit
*.gpState

# ReSharper is a .NET coding add-in
_ReSharper*/
*.[Rr]e[Ss]harper
*.DotSettings.user

# JustCode is a .NET coding add-in
.JustCode

# TeamCity is a build add-in
_TeamCity*

# DotCover is a Code Coverage Tool
*.dotCover

# NCrunch
_NCrunch_*
.*crunch*.local.xml
nCrunchTemp_*

# MightyMoose
*.mm.*
AutoTest.Net/

# Web workbench (sass)
.sass-cache/

# Installshield output folder
[Ee]xpress/

# DocProject is a documentation generator add-in
DocProject/buildhelp/
DocProject/Help/*.HxT
DocProject/Help/*.HxC
DocProject/Help/*.hhc
DocProject/Help/*.hhk
DocProject/Help/*.hhp
DocProject/Help/Html2
DocProject/Help/html

# Click-Once directory
publish/

# Publish Web Output
*.[Pp]ublish.xml
*.azurePubxml

# TODO: Un-comment the next line if you do not want to checkin 
# your web deploy settings because they may include unencrypted
# passwords
#*.pubxml
*.publishproj

# NuGet Packages
*.nupkg
# The packages folder can be ignored because of Package Restore
**/packages/*
# except build/, which is used as an MSBuild target.
!**/packages/build/
# Uncomment if necessary however generally it will be regenerated when needed
#!**/packages/repositories.config
# NuGet v3's project.json files produces more ignoreable files
*.nuget.props
*.nuget.targets

# Microsoft Azure Build Output
csx/
*.build.csdef

# Microsoft Azure Emulator
ecf/
rcf/

# Microsoft Azure ApplicationInsights config file
ApplicationInsights.config

# Windows Store app package directory
AppPackages/
BundleArtifacts/

# Visual Studio cache files
# files ending in .cache can be ignored
*.[Cc]ache
# but keep track of directories ending in .cache
!*.[Cc]ache/

# Others
ClientBin/
[Ss]tyle[Cc]op.*
~$*
*~
*.dbmdl
*.dbproj.schemaview
*.pfx
*.publishsettings
node_modules/
orleans.codegen.cs

# RIA/Silverlight projects
Generated_Code/

# Backup & report files from converting an old project file
# to a newer Visual Studio version. Backup files are not needed,
# because we have git ;-)
_UpgradeReport_Files/
Backup*/
UpgradeLog*.XML
UpgradeLog*.htm

# SQL Server files
*.mdf
*.ldf

# Business Intelligence projects
*.rdl.data
*.bim.layout
*.bim_*.settings

# Microsoft Fakes
FakesAssemblies/

# GhostDoc plugin setting file
*.GhostDoc.xml

# Node.js Tools for Visual Studio
.ntvs_analysis.dat

# Visual Studio 6 build log
*.plg

# Visual Studio 6 workspace options file
*.opt

# Visual Studio LightSwitch build output
**/*.HTMLClient/GeneratedArtifacts
**/*.DesktopClient/GeneratedArtifacts
**/*.DesktopClient/ModelManifest.xml
**/*.Server/GeneratedArtifacts
**/*.Server/ModelManifest.xml
_Pvt_Extensions

# LightSwitch generated files
GeneratedArtifacts/
ModelManifest.xml

# Paket dependency manager
.paket/paket.exe

# FAKE - F# Make
.fake/

How do you perform address validation?

NAICS.com is coming out with an API that will add all kinds of key business data including street address. This would happen on the fly as your site's forms are processed. https://www.naics.com/business-intelligence-api/

how to drop database in sqlite?

try this :

 context.deleteDatabase(DATABASE_NAME);

How to delete SQLite database from Android programmatically

Best ways to teach a beginner to program?

Your question quite depends on age and education of your brother, but if he is a child/teenager, I would recommend to do some GUI programming or graphic programming first (with Canvas etc.). It looks good, and you have immediate results. Algorithms are boring, and too abstract for young people (before say 15 years old).

When I started programming on ZX Spectrum (I was like 12 years old), I liked to draw various things on the screen, and it was still interesting. I didn't learn about real algorithmic techniques until I was maybe 18. Don't be mislead that such "simple" programming is a wrong start; the interest of the person learning it is the most important part of it.

So, I would look into PyKDE, PyGTK, PyQt or Python + OpenGL (there are certainly some tutorials on the net, I know of some Czech ones but that won't help you :)).

Of course, if your brother is older and has education close to mathematics, you can head directly to algorithms and such.

android - save image into gallery

I've tried a lot of things to let this work on Marshmallow and Lollipop. Finally i ended up moving the saved picture to the DCIM folder (new Google Photo app scan images only if they are inside this folder apparently)

public static File createImageFile() throws IOException {
    // Create an image file name
    String timeStamp = new SimpleDateFormat("yyyyMMdd_HHmmss")
         .format(System.currentTimeInMillis());
    File storageDir = new File(Environment
         .getExternalStoragePublicDirectory(Environment.DIRECTORY_DCIM) + "/Camera/");
    if (!storageDir.exists())
        storageDir.mkdirs();
    File image = File.createTempFile(
            timeStamp,                   /* prefix */
            ".jpeg",                     /* suffix */
            storageDir                   /* directory */
    );
    return image;
}

And then the standard code for scanning files which you can find in the Google Developers site too.

public static void addPicToGallery(Context context, String photoPath) {
    Intent mediaScanIntent = new Intent(Intent.ACTION_MEDIA_SCANNER_SCAN_FILE);
    File f = new File(photoPath);
    Uri contentUri = Uri.fromFile(f);
    mediaScanIntent.setData(contentUri);
    context.sendBroadcast(mediaScanIntent);
}

Please remember that this folder could not be present in every device in the world and that starting from Marshmallow (API 23), you need to request the permission to WRITE_EXTERNAL_STORAGE to the user.

Is there a way since (iOS 7's release) to get the UDID without using iTunes on a PC/Mac?

Hope this would help:

Connect iPhone to your MAC(I didn't try this with windows)
Click on Apple’s logo on the top left corner > select About This Mac
In Overview tab > System Report
Hardware in the left column > USB >
then on right pane select iPhone
in bottom pane -> "Serial number”

-> And that serial number is UDID

How to pass values between Fragments

Kotlin way

Use a SharedViewModel proposed at the official ViewModel documentation

It's very common that two or more fragments in an activity need to communicate with each other. Imagine a common case of master-detail fragments, where you have a fragment in which the user selects an item from a list and another fragment that displays the contents of the selected item. This case is never trivial as both fragments need to define some interface description, and the owner activity must bind the two together. In addition, both fragments must handle the scenario where the other fragment is not yet created or visible.

This common pain point can be addressed by using ViewModel objects. These fragments can share a ViewModel using their activity scope to handle this communication

First implement fragment-ktx to instantiate your viewmodel more easily

dependencies {
    implementation "androidx.fragment:fragment-ktx:1.2.2"
}

Then, you just need to put inside the viewmodel the data you will be sharing with the other fragment

class SharedViewModel : ViewModel() {
    val selected = MutableLiveData<Item>()

    fun select(item: Item) {
        selected.value = item
    }
}

Then, to finish up, just instantiate your viewModel in each fragment, and set the value of selected from the fragment you want to set the data

Fragment A

class MasterFragment : Fragment() {

    private val model: SharedViewModel by activityViewModels()

    override fun onViewCreated(view: View, savedInstanceState: Bundle?) {
        super.onViewCreated(view, savedInstanceState)
        itemSelector.setOnClickListener { item ->
        model.select(item)
      }

    }
}

And then, just listen for this value at your Fragment destination

Fragment B

 class DetailFragment : Fragment() {

        private val model: SharedViewModel by activityViewModels()

        override fun onViewCreated(view: View, savedInstanceState: Bundle?) {
            super.onViewCreated(view, savedInstanceState)
            model.selected.observe(viewLifecycleOwner, Observer<Item> { item ->
                // Update the UI
            })
        }
    }

You can also do it in the opposite way

How to sort an associative array by its values in Javascript?

Continued discussion & other solutions covered at How to sort an (associative) array by value? with the best solution (for my case) being by saml (quoted below).

Arrays can only have numeric indexes. You'd need to rewrite this as either an Object, or an Array of Objects.

var status = new Array();
status.push({name: 'BOB', val: 10});
status.push({name: 'TOM', val: 3});
status.push({name: 'ROB', val: 22});
status.push({name: 'JON', val: 7});

If you like the status.push method, you can sort it with:

status.sort(function(a,b) {
    return a.val - b.val;
});

Sockets - How to find out what port and address I'm assigned

The comment in your code is wrong. INADDR_ANY doesn't put server's IP automatically'. It essentially puts 0.0.0.0, for the reasons explained in mark4o's answer.

What's the difference between compiled and interpreted language?

It is a very murky distinction, and in fact generally not a property of a language itself, but rather of the program you are using to execute code in that language.

However, most languages are used primarily in one form or the other, and yes, Java is essentially always compiled, while javascript is essentially always interpreted.

To compile source code is to run a program on it that generates a binary, executable file that, when run, has the behavior defined by the source. For instance, javac compiles human-readbale .java files into machine-readable .class files.

To interpret source code is run a program on it that produces the defined behavior right away, without generating an intermediary file. For instance, when your web browser loads stackoverflow.com, it interprets a bunch of javascript (which you can look at by viewing the page source) and produces lots of the nice effects these pages have - for instance, upvoting, or the little notifier bars across the top.

The equivalent of wrap_content and match_parent in flutter?

A simple workaround:

If a container has only one top level child, then you can specify alignment property for the child and give it any available value. it'll fill all the space in the container.

Container(color:Colors.white,height:200.0,width:200.0,
 child:Container(
    color: Colors.yellow,
    alignment:Alignment.[any_available_option] // make the yellow child match the parent size
   )
)

Another way:

Container(color:Colors.white,height:200.0,width:200.0,
 child:Container(
    color: Colors.yellow,
    constraints:  BoxConstraints.expand(height: 100.0), // height will be 100 dip and width will be match parent
   )
)

How to position the form in the center screen?

public class Example extends JFrame {

public static final int WIDTH = 550;//Any Size
public static final int HEIGHT = 335;//Any Size

public Example(){

      init();

}

private void init() {

    try {
        UIManager
                .setLookAndFeel("com.sun.java.swing.plaf.nimbus.NimbusLookAndFeel");

        SwingUtilities.updateComponentTreeUI(this);
        Dimension dimension = Toolkit.getDefaultToolkit().getScreenSize();
        setSize(WIDTH, HEIGHT);

        setLocation((int) (dimension.getWidth() / 2 - WIDTH / 2),
                (int) (dimension.getHeight() / 2 - HEIGHT / 2));


    } catch (ClassNotFoundException e) {
        e.printStackTrace();
    } catch (InstantiationException e) {
        e.printStackTrace();
    } catch (IllegalAccessException e) {
        e.printStackTrace();
    } catch (UnsupportedLookAndFeelException e) {
        e.printStackTrace();
    }

}
}

Given a starting and ending indices, how can I copy part of a string in C?

Just use memcpy.

If the destination isn't big enough, strncpy won't null terminate. if the destination is huge compared to the source, strncpy just fills the destination with nulls after the string. strncpy is pointless, and unsuitable for copying strings.

strncpy is like memcpy except it fills the destination with nulls once it sees one in the source. It's absolutely useless for string operations. It's for fixed with 0 padded records.

What is the easiest way to get current GMT time in Unix timestamp format?

Does this help?

from datetime import datetime
import calendar

d = datetime.utcnow()
unixtime = calendar.timegm(d.utctimetuple())
print unixtime

How to convert Python UTC datetime object to UNIX timestamp

How to fix: /usr/lib/libstdc++.so.6: version `GLIBCXX_3.4.15' not found

If someone has the same issue as I had - make sure that you don't install from the Ubuntu 14.04 repo onto a 12.04 machine - it gives this same error. Reinstalling from the proper repository fixed the issue.

Difference between an API and SDK

Piece of cake:

an API is an interface. It's like the specification of the telephone system or the electrical wiring in your house. Anything* can use it as long as it knows how to interface. You can even buy off-the-shelf software to use a particular API, just as you can buy off the shelf telephone equipment or devices that plug into the AC wiring in your house.
an SDK is implementation tooling. It's like a kit that allows** you to build something custom to hook up to the telephone system or electrical wiring.

*Anything can use an API. Some APIs have security provisions to require license keys, authentication, etc. which may prohibit complete use of the API in particular instances, but that's only because particular authentication/authorization steps fail. Any software that presents the right credentials (if required) can use the API.

**Technically, if an API is well-documented, you don't need an SDK to build your own software to use the API. But having an SDK generally makes the process much easier.

Maven 3 Archetype for Project With Spring, Spring MVC, Hibernate, JPA

With appFuse framework, you can create an Spring MVC archetype with jpa support, etc ...

Take a look at it's quickStart guide to see how to create an archetype based on this Framework.

Foundational frameworks in AppFuse:

Bootstrap and jQuery
Maven, Hibernate, Spring and Spring Security
Java 7, Annotations, JSP 2.1, Servlet 3.0
Web Frameworks: JSF, Struts 2, Spring MVC, Tapestry 5, Wicket
JPA Support

For example to create an appFuse light archetype :

mvn archetype:generate -B -DarchetypeGroupId=org.appfuse.archetypes 
-DarchetypeArtifactId=appfuse-light-struts-archetype -DarchetypeVersion=2.2.1 
-DgroupId=com.mycompany -DartifactId=myproject

count number of characters in nvarchar column

Use

SELECT length(yourfield) FROM table;

What is cardinality in Databases?

A source of confusion may be the use of the word in two different contexts - data modelling and database query optimization.

In data modelling terms, cardinality is how one table relates to another.

1-1 (one row in table A relates to one row in tableB)
1-Many (one row in table A relates to many rows in tableB)
Many-Many (Many rows in table A relate to many rows in tableB)

There are also optional participation conditions to the above (where a row in one table doesn't have to relate to the other table at all).

See Wikipedia on Cardinality (data modelling).

When talking about database query optimization, cardinality refers to the data in a column of a table, specifically how many unique values are in it. This statistic helps with planning queries and optimizing the execution plans.

See Wikipedia on Cardinality (SQL statements).

SQLAlchemy: What's the difference between flush() and commit()?

A Session object is basically an ongoing transaction of changes to a database (update, insert, delete). These operations aren't persisted to the database until they are committed (if your program aborts for some reason in mid-session transaction, any uncommitted changes within are lost).

The session object registers transaction operations with session.add(), but doesn't yet communicate them to the database until session.flush() is called.

session.flush() communicates a series of operations to the database (insert, update, delete). The database maintains them as pending operations in a transaction. The changes aren't persisted permanently to disk, or visible to other transactions until the database receives a COMMIT for the current transaction (which is what session.commit() does).

session.commit() commits (persists) those changes to the database.

flush() is always called as part of a call to commit() (1).

When you use a Session object to query the database, the query will return results both from the database and from the flushed parts of the uncommitted transaction it holds. By default, Session objects autoflush their operations, but this can be disabled.

Hopefully this example will make this clearer:

#---
s = Session()

s.add(Foo('A')) # The Foo('A') object has been added to the session.
                # It has not been committed to the database yet,
                #   but is returned as part of a query.
print 1, s.query(Foo).all()
s.commit()

#---
s2 = Session()
s2.autoflush = False

s2.add(Foo('B'))
print 2, s2.query(Foo).all() # The Foo('B') object is *not* returned
                             #   as part of this query because it hasn't
                             #   been flushed yet.
s2.flush()                   # Now, Foo('B') is in the same state as
                             #   Foo('A') was above.
print 3, s2.query(Foo).all() 
s2.rollback()                # Foo('B') has not been committed, and rolling
                             #   back the session's transaction removes it
                             #   from the session.
print 4, s2.query(Foo).all()

#---
Output:
1 [<Foo('A')>]
2 [<Foo('A')>]
3 [<Foo('A')>, <Foo('B')>]
4 [<Foo('A')>]

MySQL 'Order By' - sorting alphanumeric correctly

I had some good results with

SELECT alphanumeric, integer FROM sorting_test ORDER BY CAST(alphanumeric AS UNSIGNED), alphanumeric ASC

fatal: git-write-tree: error building trees

To follow up on malat's response, you can avoid losing changes by creating a patch and reapply it at a later time.

git diff --no-prefix > patch.txt
patch -p0 < patch.txt

Store your patch outside the repository folder for safety.

How to make Git "forget" about a file that was tracked but is now in .gitignore?

The answer from Matt Fear was the most effective IMHO. The following is just a PowerShell script for those in windows to only remove files from their git repo that matches their exclusion list.

# Get files matching exclusionsfrom .gitignore
# Excluding comments and empty lines
$ignoreFiles =  gc .gitignore | ?{$_ -notmatch  "#"} |  ?{$_ -match  "\S"} | % {
                    $ignore = "*" + $_ + "*"
                    (gci -r -i $ignore).FullName
                }
$ignoreFiles = $ignoreFiles| ?{$_ -match  "\S"}

# Remove each of these file from Git 
$ignoreFiles | % { git rm $_}

git add .

spring PropertyPlaceholderConfigurer and context:property-placeholder

<context:property-placeholder ... /> is the XML equivalent to the PropertyPlaceholderConfigurer. So, prefer that. The <util:properties/> simply factories a java.util.Properties instance that you can inject.

In Spring 3.1 (not 3.0...) you can do something like this:

@Configuration
@PropertySource("/foo/bar/services.properties")
public class ServiceConfiguration { 

    @Autowired Environment environment; 

    @Bean public javax.sql.DataSource dataSource( ){ 
        String user = this.environment.getProperty("ds.user");
        ...
    } 
}

In Spring 3.0, you can "access" properties defined using the PropertyPlaceHolderConfigurer mechanism using the SpEl annotations:

@Value("${ds.user}") private String user;

If you want to remove the XML all together, simply register the PropertyPlaceholderConfigurer manually using Java configuration. I prefer the 3.1 approach. But, if youre using the Spring 3.0 approach (since 3.1's not GA yet...), you can now define the above XML like this:

@Configuration 
public class MySpring3Configuration {     
        @Bean 
        public static PropertyPlaceholderConfigurer configurer() { 
             PropertyPlaceholderConfigurer ppc = ...
             ppc.setLocations(...);
             return ppc; 
        } 

        @Bean 
        public class DataSource dataSource(
                @Value("${ds.user}") String user, 
                @Value("${ds.pw}") String pw, 
                ...) { 
            DataSource ds = ...
            ds.setUser(user);
            ds.setPassword(pw);                        
            ...
            return ds;
        }
}

Note that the PPC is defined using a static bean definition method. This is required to make sure the bean is registered early, because the PPC is a BeanFactoryPostProcessor - it can influence the registration of the beans themselves in the context, so it necessarily has to be registered before everything else.

How do you do block comments in YAML?

An alternative approach:

your YAML structure has well defined fields to be used by your app
AND you may freely add additional fields that won't mess up with your app

then

at any level you may add a new block text field named like "Description" or "Comment" or "Notes" or whatever

Example:

Instead of

# This comment
# is too long

use

Description: >
  This comment
  is too long

Comment: >
    This comment is also too long
    and newlines survive from parsing!

More advantages:

If the comments become large and complex and have a repeating pattern, you may promote them from plain text blocks to objects
Your app may -in the future- read or update those comments

How can I deserialize JSON to a simple Dictionary<string,string> in ASP.NET?

I had the same problem, so I wrote this my self. This solution is differentiated from other answers because it can deserialize in to multiple levels.

Just send JSON string in to deserializeToDictionary function it will return non strongly-typed Dictionary<string, object> object.

Old code

private Dictionary<string, object> deserializeToDictionary(string jo)
{
    var values = JsonConvert.DeserializeObject<Dictionary<string, object>>(jo);
    var values2 = new Dictionary<string, object>();
    foreach (KeyValuePair<string, object> d in values)
    {
        // if (d.Value.GetType().FullName.Contains("Newtonsoft.Json.Linq.JObject"))
        if (d.Value is JObject)
        {
            values2.Add(d.Key, deserializeToDictionary(d.Value.ToString()));
        }
        else
        {
            values2.Add(d.Key, d.Value);
        }
    }
    return values2;
}

Ex: This will return Dictionary<string, object> object of a Facebook JSON response.

Test

private void button1_Click(object sender, EventArgs e)
{
    string responsestring = "{\"id\":\"721055828\",\"name\":\"Dasun Sameera Weerasinghe\",\"first_name\":\"Dasun\",\"middle_name\":\"Sameera\",\"last_name\":\"Weerasinghe\",\"username\":\"dasun\",\"gender\":\"male\",\"locale\":\"en_US\",  hometown: {id: \"108388329191258\", name: \"Moratuwa, Sri Lanka\",}}";
    Dictionary<string, object> values = deserializeToDictionary(responsestring);
}

Note: hometown further deserilize into a Dictionary<string, object> object.

Update

My old answer works great if there is no array on JSON string. This one further deserialize in to a List<object> if an element is an array.

Just send a JSON string in to deserializeToDictionaryOrList function it will return non strongly-typed Dictionary<string, object> object or List<object>.

private static object deserializeToDictionaryOrList(string jo,bool isArray=false)
{
    if (!isArray)
    {
        isArray = jo.Substring(0, 1) == "[";
    }
    if (!isArray)
    {
        var values = JsonConvert.DeserializeObject<Dictionary<string, object>>(jo);
        var values2 = new Dictionary<string, object>();
        foreach (KeyValuePair<string, object> d in values)
        {
            if (d.Value is JObject)
            {
                values2.Add(d.Key, deserializeToDictionary(d.Value.ToString()));
            }
            else if (d.Value is JArray)
            {
                values2.Add(d.Key, deserializeToDictionary(d.Value.ToString(), true));
            }
            else
            {
                values2.Add(d.Key, d.Value);
            }
        }
        return values2;
    }else
    {
        var values = JsonConvert.DeserializeObject<List<object>>(jo);
        var values2 = new List<object>();
        foreach (var d in values)
        {
            if (d is JObject)
            {
                values2.Add(deserializeToDictionary(d.ToString()));
            }
            else if (d is JArray)
            {
                values2.Add(deserializeToDictionary(d.ToString(), true));
            }
            else
            {
                values2.Add(d);
            }
        }
        return values2;
    }
}

Split a string by another string in C#

There's an overload of String.Split for this:

"THExxQUICKxxBROWNxxFOX".Split(new [] {"xx"}, StringSplitOptions.None);

what's data-reactid attribute in html?

It's a custom html attribute but probably in this case is used by the Facebook React JS Library.

Take a look: http://facebook.github.io/react/

Call PowerShell script PS1 from another PS1 script inside Powershell ISE

I am calling myScript1.ps1 from myScript2.ps1 .

Assuming both of the script are at the same location, first get the location of the script by using this command :

$PSScriptRoot

And, then, append the script name you want to call like this :

& "$PSScriptRoot\myScript1.ps1"

This should work.

javascript: pause setTimeout();

/revive

ES6 Version using Class-y syntactic sugar

(slightly-modified: added start())

_x000D_

class Timer {_x000D_
  constructor(callback, delay) {_x000D_
    this.callback = callback_x000D_
    this.remainingTime = delay_x000D_
    this.startTime_x000D_
    this.timerId_x000D_
  }_x000D_
_x000D_
  pause() {_x000D_
    clearTimeout(this.timerId)_x000D_
    this.remainingTime -= new Date() - this.startTime_x000D_
  }_x000D_
_x000D_
  resume() {_x000D_
    this.startTime = new Date()_x000D_
    clearTimeout(this.timerId)_x000D_
    this.timerId = setTimeout(this.callback, this.remainingTime)_x000D_
  }_x000D_
_x000D_
  start() {_x000D_
    this.timerId = setTimeout(this.callback, this.remainingTime)_x000D_
  }_x000D_
}_x000D_
_x000D_
// supporting code_x000D_
const pauseButton = document.getElementById('timer-pause')_x000D_
const resumeButton = document.getElementById('timer-resume')_x000D_
const startButton = document.getElementById('timer-start')_x000D_
_x000D_
const timer = new Timer(() => {_x000D_
  console.log('called');_x000D_
  document.getElementById('change-me').classList.add('wow')_x000D_
}, 3000)_x000D_
_x000D_
pauseButton.addEventListener('click', timer.pause.bind(timer))_x000D_
resumeButton.addEventListener('click', timer.resume.bind(timer))_x000D_
startButton.addEventListener('click', timer.start.bind(timer))

_x000D_

<!doctype html>_x000D_
<html>_x000D_
<head>_x000D_
  <title>Traditional HTML Document. ZZz...</title>_x000D_
  <style type="text/css">_x000D_
    .wow { color: blue; font-family: Tahoma, sans-serif; font-size: 1em; }_x000D_
  </style>_x000D_
</head>_x000D_
<body>_x000D_
  <h1>DOM &amp; JavaScript</h1>_x000D_
_x000D_
  <div id="change-me">I'm going to repaint my life, wait and see.</div>_x000D_
_x000D_
  <button id="timer-start">Start!</button>_x000D_
  <button id="timer-pause">Pause!</button>_x000D_
  <button id="timer-resume">Resume!</button>_x000D_
</body>_x000D_
</html>

_x000D_

How to align texts inside of an input?

@Html.TextBoxFor(model => model.IssueDate, new { @class = "form-control", name = "inv_issue_date", id = "inv_issue_date", title = "Select Invoice Issue Date", placeholder = "dd/mm/yyyy", style = "text-align:center;" })

How to generate a random number between a and b in Ruby?

def random_int(min, max)
    rand(max - min) + min
end

Put a Delay in Javascript

This thread has a good discussion and a useful solution:

function pause( iMilliseconds )
{
    var sDialogScript = 'window.setTimeout( function () { window.close(); }, ' + iMilliseconds + ');';
    window.showModalDialog('javascript:document.writeln ("<script>' + sDialogScript + '<' + '/script>")');
}

Unfortunately it appears that this doesn't work in some versions of IE, but the thread has many other worthy proposals if that proves to be a problem for you.

Best way to specify whitespace in a String.Split operation

Why don't you just do this:

var ssizes = myStr.Split(" \t".ToCharArray());

It seems there is a method String.ToCharArray() in .NET 4.0!

EDIT: As VMAtm has pointed out, the method already existed in .NET 2.0!

Current timestamp as filename in Java

No need to get too complicated, try this one liner:

String fileName = new SimpleDateFormat("yyyyMMddHHmm'.txt'").format(new Date());

how to get the last part of a string before a certain character?

You are looking for str.rsplit(), with a limit:

print x.rsplit('-', 1)[0]

.rsplit() searches for the splitting string from the end of input string, and the second argument limits how many times it'll split to just once.

Another option is to use str.rpartition(), which will only ever split just once:

print x.rpartition('-')[0]

For splitting just once, str.rpartition() is the faster method as well; if you need to split more than once you can only use str.rsplit().

Demo:

>>> x = 'http://test.com/lalala-134'
>>> print x.rsplit('-', 1)[0]
http://test.com/lalala
>>> 'something-with-a-lot-of-dashes'.rsplit('-', 1)[0]
'something-with-a-lot-of'

and the same with str.rpartition()

>>> print x.rpartition('-')[0]
http://test.com/lalala
>>> 'something-with-a-lot-of-dashes'.rpartition('-')[0]
'something-with-a-lot-of'

Bootstrap4 adding scrollbar to div

Use the overflow-y: scroll property on the element that contains the elements.

The overflow-y property specifies whether to clip the content, add a scroll bar, or display overflow content of a block-level element, when it overflows at the top and bottom edges.

Sometimes it is interesting to place a height for the element next to the overflow-y property, as in the example below:

<ul class="nav nav-pills nav-stacked" style="height: 250px; overflow-y: scroll;">
  <li class="nav-item">
    <a class="nav-link active" href="#">Active</a>
  </li>
  <li class="nav-item">
    <a class="nav-link" href="#">Link</a>
  </li>
  <li class="nav-item">
    <a class="nav-link" href="#">Link</a>
  </li>
  <li class="nav-item">
    <a class="nav-link disabled" href="#">Disabled</a>
  </li>
</ul>

How to make rectangular image appear circular with CSS

you can only make circle from square using border-radius.

border-radius doesn't increase or reduce heights nor widths.

Your request is to use only image tag , it is basicly not possible if tag is not a square.

If you want to use a blank image and set another in bg, it is going to be painfull , one background for each image to set.

Cropping can only be done if a wrapper is there to do so. inthat case , you have many ways to do it

Use getElementById on HTMLElement instead of HTMLDocument

I don't like it either.

So use javascript:

Public Function GetJavaScriptResult(doc as HTMLDocument, jsString As String) As String

    Dim el As IHTMLElement
    Dim nd As HTMLDOMTextNode

    Set el = doc.createElement("INPUT")
    Do
        el.ID = GenerateRandomAlphaString(100)
    Loop Until Document.getElementById(el.ID) Is Nothing
    el.Style.display = "none"
    Set nd = Document.appendChild(el)

    doc.parentWindow.ExecScript "document.getElementById('" & el.ID & "').value = " & jsString

    GetJavaScriptResult = Document.getElementById(el.ID).Value

    Document.removeChild nd

End Function


Function GenerateRandomAlphaString(Length As Long) As String

    Dim i As Long
    Dim Result As String

    Randomize Timer

    For i = 1 To Length
        Result = Result & Chr(Int(Rnd(Timer) * 26 + 65 + Round(Rnd(Timer)) * 32))
    Next i

    GenerateRandomAlphaString = Result

End Function

Let me know if you have any problems with this; I've changed the context from a method to a function.

By the way, what version of IE are you using? I suspect you're on < IE8. If you upgrade to IE8 I presume it'll update shdocvw.dll to ieframe.dll and you will be able to use document.querySelector/All.

Edit

Comment response which isn't really a comment: Basically the way to do this in VBA is to traverse the child nodes. The problem is you don't get the correct return types. You could fix this by making your own classes that (separately) implement IHTMLElement and IHTMLElementCollection; but that's WAY too much of a pain for me to do it without getting paid :). If you're determined, go and read up on the Implements keyword for VB6/VBA.

Public Function getSubElementsByTagName(el As IHTMLElement, tagname As String) As Collection

    Dim descendants As New Collection
    Dim results As New Collection
    Dim i As Long

    getDescendants el, descendants

    For i = 1 To descendants.Count
        If descendants(i).tagname = tagname Then
            results.Add descendants(i)
        End If
    Next i

    getSubElementsByTagName = results

End Function

Public Function getDescendants(nd As IHTMLElement, ByRef descendants As Collection)
    Dim i As Long
    descendants.Add nd
    For i = 1 To nd.Children.Length
        getDescendants nd.Children.Item(i), descendants
    Next i
End Function

how to increase sqlplus column output length?

On Windows you may try this:

right-click in the sqlplus window
select properties ->layout
increase screen buffer size width to 1000

For-loop vs while loop in R

Because 1 is numeric, but not integer (i.e. it's a floating point number), and 1:6000 is numeric and integer.

> print(class(1))
[1] "numeric"
> print(class(1:60000))
[1] "integer"

60000 squared is 3.6 billion, which is NOT representable in signed 32-bit integer, hence you get an overflow error:

> as.integer(60000)*as.integer(60000)
[1] NA
Warning message:
In as.integer(60000) * as.integer(60000) : NAs produced by integer overflow

3.6 billion is easily representable in floating point, however:

> as.single(60000)*as.single(60000)
[1] 3.6e+09

To fix your for code, convert to a floating point representation:

function (N)
{
    for(i in as.single(1:N)) {
        y <- i*i
    }
}

Xcode 4 - "Archive" is greyed out?

As the other answers state, you need to select an active scheme to something that is not a simulator, i.e. a device that's connected to your mac.

If you have no device connected to the mac then selecting "Generic IOS Device" works also.

What is Haskell used for in the real world?

This is a pretty good source for info about Haskell and its uses:

Open Source Haskell Releases and Growth

Difference between angle bracket < > and double quotes " " while including header files in C++?

It's compiler dependent. That said, in general using " prioritizes headers in the current working directory over system headers. <> usually is used for system headers. From to the specification (Section 6.10.2):

A preprocessing directive of the form
  # include <h-char-sequence> new-line
searches a sequence of implementation-defined places for a header identified uniquely by the specified sequence between the < and > delimiters, and causes the replacement of that directive by the entire contents of the header. How the places are specified or the header identified is implementation-defined.

A preprocessing directive of the form
  # include "q-char-sequence" new-line
causes the replacement of that directive by the entire contents of the source file identified by the specified sequence between the " delimiters. The named source file is searched for in an implementation-defined manner. If this search is not supported, or if the search fails, the directive is reprocessed as if it read
  # include <h-char-sequence> new-line
with the identical contained sequence (including > characters, if any) from the original directive.

So on most compilers, using the "" first checks your local directory, and if it doesn't find a match then moves on to check the system paths. Using <> starts the search with system headers.

Using PI in python 2.7

To have access to stuff provided by math module, like pi. You need to import the module first:

import math
print (math.pi)

How to read a HttpOnly cookie using JavaScript

Different Browsers enable different security measures when the HTTPOnly flag is set. For instance Opera and Safari do not prevent javascript from writing to the cookie. However, reading is always forbidden on the latest version of all major browsers.

But more importantly why do you want to read an HTTPOnly cookie? If you are a developer, just disable the flag and make sure you test your code for xss. I recommend that you avoid disabling this flag if at all possible. The HTTPOnly flag and "secure flag" (which forces the cookie to be sent over https) should always be set.

If you are an attacker, then you want to hijack a session. But there is an easy way to hijack a session despite the HTTPOnly flag. You can still ride on the session without knowing the session id. The MySpace Samy worm did just that. It used an XHR to read a CSRF token and then perform an authorized task. Therefore, the attacker could do almost anything that the logged user could do.

People have too much faith in the HTTPOnly flag, XSS can still be exploitable. You should setup barriers around sensitive features. Such as the change password filed should require the current password. An admin's ability to create a new account should require a captcha, which is a CSRF prevention technique that cannot be easily bypassed with an XHR.

Why is it important to override GetHashCode when Equals method is overridden?

By overriding Equals you're basically stating that you are the one who knows better how to compare two instances of a given type, so you're likely to be the best candidate to provide the best hash code.

This is an example of how ReSharper writes a GetHashCode() function for you:

public override int GetHashCode()
{
    unchecked
    {
        var result = 0;
        result = (result * 397) ^ m_someVar1;
        result = (result * 397) ^ m_someVar2;
        result = (result * 397) ^ m_someVar3;
        result = (result * 397) ^ m_someVar4;
        return result;
    }
}

As you can see it just tries to guess a good hash code based on all the fields in the class, but since you know your object's domain or value ranges you could still provide a better one.

Chrome DevTools Devices does not detect device when plugged in

I solved this problem without installing any Samsung or Android SDK drivers or having to select MIDI or Image transfer options, as detailed in the many answers above spanning several years.

For me, on Windows 10, the problem was caused by the Windows 10 built-in app called Your Phone. I only had to repair the app in its Advanced Settings. There might be an easier way to access the app's settings but I accessed them this way:

System Settings
Add or Remove Programs
Click Your Phone from the list
Select Advanced Options
Select Repair under Reset options

After this, when I reconnected and toggled USB Debugging on my Android phone (Samsung A30), my phone prompted me for approval of the RSA key fingerprint, which allowed Chrome DevTools to finally recognize my phone.

How do you use NSAttributedString?

In Swift 4:

let string:NSMutableAttributedString = {

    let mutableString = NSMutableAttributedString(string: "firstsecondthird")

    mutableString.addAttribute(NSForegroundColorAttributeName, value: UIColor.red , range: NSRange(location: 0, length: 5))
    mutableString.addAttribute(NSForegroundColorAttributeName, value: UIColor.green , range: NSRange(location: 5, length: 6))
    mutableString.addAttribute(NSForegroundColorAttributeName, value: UIColor.blue , range: NSRange(location: 11, length: 5))
    return mutableString
}()

print(string)

Print list without brackets in a single row

print(', '.join(names))

This, like it sounds, just takes all the elements of the list and joins them with ', '.

Command failed due to signal: Segmentation fault: 11

In my case Product Clean and then restarting Xcode did resolve this problem...

Javascript : natural sort of alphanumerical strings

The most fully-featured library to handle this as of 2019 seems to be natural-orderby.

const { orderBy } = require('natural-orderby')

const unordered = [
  '123asd',
  '19asd',
  '12345asd',
  'asd123',
  'asd12'
]

const ordered = orderBy(unordered)

// [ '19asd',
//   '123asd',
//   '12345asd',
//   'asd12',
//   'asd123' ]

It not only takes arrays of strings, but also can sort by the value of a certain key in an array of objects. It can also automatically identify and sort strings of: currencies, dates, currency, and a bunch of other things.

Surprisingly, it's also only 1.6kB when gzipped.

What are the true benefits of ExpandoObject?

I think it will have a syntactic benefit, since you'll no longer be "faking" dynamically added properties by using a dictionary.

That, and interop with dynamic languages I would think.

adding and removing classes in angularJs using ng-click

I can't believe how complex everyone is making this. This is actually very simple. Just paste this into your html (no directive./controller changes required - "bg-info" is a bootstrap class):

<div class="form-group col-md-12">
    <div ng-class="{'bg-info':     (!transport_type)}"    ng-click="transport_type=false">CARS</div>
    <div ng-class="{'bg-info': transport_type=='TRAINS'}" ng-click="transport_type='TRAINS'">TRAINS</div>
    <div ng-class="{'bg-info': transport_type=='PLANES'}" ng-click="transport_type='PLANES'">PLANES</div>
</div>

What is the correct syntax for 'else if'?

In python "else if" is spelled "elif".
Also, you need a colon after the elif and the else.

Simple answer to a simple question. I had the same problem, when I first started (in the last couple of weeks).

So your code should read:

def function(a):
    if a == '1':
        print('1a')
    elif a == '2':
        print('2a')
    else:
        print('3a')

function(input('input:'))

@Value annotation type casting to Integer from String

If you are using @Configuation then instantiate below static bean. If not static @Configutation is instantiated very early and and the BeanPostProcessors responsible for resolving annotations like @Value, @Autowired etc, cannot act on it. Refer here

@Bean
public static PropertySourcesPlaceholderConfigurer propertyConfigurer() {
   return new PropertySourcesPlaceholderConfigurer();
}

Does WhatsApp offer an open API?

is the correct answer. WhatsApp is intentionally a closed system without an API for external access.

There were several projects available that reverse engineered the WhatsApp webservice interfaces. However, to my knowledge all of them are now discontinued/defunct due to legal action against them from WhatsApp.

For mobile phone applications there is a limited URL-Scheme-API available on IPhone and Android (Android-intent possible as well).

Best way to generate xml?

Use lxml.builder class, from: http://lxml.de/tutorial.html#the-e-factory

import lxml.builder as lb
from lxml import etree

nstext = "new story"
story = lb.E.Asset(
  lb.E.Attribute(nstext, name="Name", act="set"),
  lb.E.Relation(lb.E.Asset(idref="Scope:767"),
            name="Scope", act="set")
  )

print 'story:\n', etree.tostring(story, pretty_print=True)

Output:

story:
<Asset>
  <Attribute name="Name" act="set">new story</Attribute>
  <Relation name="Scope" act="set">
    <Asset idref="Scope:767"/>
  </Relation>
</Asset>

How to delete and recreate from scratch an existing EF Code First database

If you created your database following this tutorial: https://msdn.microsoft.com/en-au/data/jj193542.aspx

... then this might work:

Delete all .mdf and .ldf files in your project directory
Go to View / SQL Server Object Explorer and delete the database from the (localdb)\v11.0 subnode. See also https://stackoverflow.com/a/15832184/2279059

Bootstrap 3 Horizontal and Vertical Divider

I know this is an "older" post. This question and the provided answers helped me get ideas for my own problem. I think this solution addresses the OP question (intersecting borders with 4 and 2 columns depending on display)

Fiddle: https://jsfiddle.net/tqmfpwhv/1/

css based on OP information, media query at end is for med & lg view.

.vr-all {
    padding:0px;
    border-right:1px solid #CC0000;
}
.vr-xs {
    padding:0px;
}
.vr-md {
    padding:0px;
}
.hrspacing { padding:0px; }
.hrcolor {
    border-color: #CC0000;
    border-style: solid;
    border-bottom: 1px;
    margin:0px;
    padding:0px;
}
/* for medium and up */
@media(min-width:992px){
    .vr-xs {
        border-right:1px solid #CC0000;
    }
    }

html adjustments to OP provided code. Red border and Img links for example.

<div class="container">
  <div class="row">
        <div class="col-xs-6 col-sm-6 col-md-3 text-center vr-all" id="one">
            <h5>Rich Media Ad Production</h5>
            <img src="http://png-1.findicons.com/files/icons/2338/reflection/128/mobile_phone.png" />
        </div>
        <div class="col-xs-6 col-sm-6 col-md-3 text-center vr-xs" id="two">
            <h5>Web Design & Development</h5>
            <img src="http://png-1.findicons.com/files/icons/2338/reflection/128/mobile_phone.png" >
        </div>

        <!-- hr for only x-small/small viewports -->
        <div class="col-xs-12 col-sm-12 hidden-md hidden-lg hrspacing"><hr class="hrcolor"></div>

        <div class="col-xs-6 col-sm-6 col-md-3 text-center vr-all" id="three">
            <h5>Mobile Apps Development</h5>
            <img src="http://png-1.findicons.com/files/icons/2338/reflection/128/mobile_phone.png" >
        </div>
        <div class="col-xs-6 col-sm-6 col-md-3 text-center vr-md" id="four">
            <h5>Creative Design</h5>
            <img src="http://png-1.findicons.com/files/icons/2338/reflection/128/mobile_phone.png" >
        </div>

        <!-- hr for for all viewports -->
        <div class="col-xs-12 hrspacing"><hr class="hrcolor"></div>

        <div class="col-xs-6 col-sm-6 col-md-3 text-center vr-all" id="five">
            <h5>Web Analytics</h5>
            <img src="http://png-1.findicons.com/files/icons/2338/reflection/128/mobile_phone.png" >
        </div>
        <div class="col-xs-6 col-sm-6 col-md-3 text-center vr-xs" id="six">
            <h5>Search Engine Marketing</h5>
            <img src="http://png-1.findicons.com/files/icons/2338/reflection/128/mobile_phone.png" >
        </div>

        <!-- hr for only x-small/small viewports -->
        <div class="col-xs-12 col-sm-12 hidden-md hidden-lg hrspacing"><hr class="hrcolor"></div>

        <div class="col-xs-6 col-sm-6 col-md-3 text-center vr-all" id="seven">
            <h5>Mobile Apps Development</h5>
            <img src="http://png-1.findicons.com/files/icons/2338/reflection/128/mobile_phone.png" >
        </div>
        <div class="col-xs-6 col-sm-6 col-md-3 text-center vr-md" id="eight">
            <h5>Quality Assurance</h5>
            <img src="http://png-1.findicons.com/files/icons/2338/reflection/128/mobile_phone.png" >
        </div>


    </div>
</div>

How to get Real IP from Visitor?

This is my function.

benefits :

Work if $_SERVER was not available.
Filter private and/or reserved IPs;
Process all forwarded IPs in X_FORWARDED_FOR
Compatible with CloudFlare
Can set a default if no valid IP found!
Short & Simple !

/**
 * Get real user ip
 *
 * Usage sample:
 * GetRealUserIp();
 * GetRealUserIp('ERROR',FILTER_FLAG_NO_RES_RANGE);
 * 
 * @param string $default default return value if no valid ip found
 * @param int    $filter_options filter options. default is FILTER_FLAG_NO_PRIV_RANGE | FILTER_FLAG_NO_RES_RANGE
 *
 * @return string real user ip
 */

function GetRealUserIp($default = NULL, $filter_options = 12582912) {
    $HTTP_X_FORWARDED_FOR = isset($_SERVER)? $_SERVER["HTTP_X_FORWARDED_FOR"]:getenv('HTTP_X_FORWARDED_FOR');
    $HTTP_CLIENT_IP = isset($_SERVER)?$_SERVER["HTTP_CLIENT_IP"]:getenv('HTTP_CLIENT_IP');
    $HTTP_CF_CONNECTING_IP = isset($_SERVER)?$_SERVER["HTTP_CF_CONNECTING_IP"]:getenv('HTTP_CF_CONNECTING_IP');
    $REMOTE_ADDR = isset($_SERVER)?$_SERVER["REMOTE_ADDR"]:getenv('REMOTE_ADDR');

    $all_ips = explode(",", "$HTTP_X_FORWARDED_FOR,$HTTP_CLIENT_IP,$HTTP_CF_CONNECTING_IP,$REMOTE_ADDR");
    foreach ($all_ips as $ip) {
        if ($ip = filter_var($ip, FILTER_VALIDATE_IP, $filter_options))
            break;
    }
    return $ip?$ip:$default;
}

Bootstrap 3 Navbar Collapse

The big difference between Bootstrap 2 and Bootstrap 3 is that Bootstrap 3 is "mobile first".

That means the default styles are designed for mobile devices and in the case of Navbars, that means it's "collapsed" by default and "expands" when it reaches a certain minimum size.

Bootstrap 3's site actually has a "hint" as to what to do: http://getbootstrap.com/components/#navbar

Customize the collapsing point

Depending on the content in your navbar, you might need to change the point at which your navbar switches between collapsed and horizontal mode. Customize the @grid-float-breakpoint variable or add your own media query.

If you're going to re-compile your LESS, you'll find the noted LESS variable in the variables.less file. It's currently set to "expand" @media (min-width: 768px) which is a "small screen" (ie. a tablet) by Bootstrap 3 terms.

@grid-float-breakpoint: @screen-tablet;

If you want to keep the collapsed a little longer you can adjust it like such:

@grid-float-breakpoint: @screen-desktop; (992px break-point)

or expand sooner

@grid-float-breakpoint: @screen-phone (480px break-point)

If you want to have it expand later, and not deal with re-compiling the LESS, you'll have to overwrite the styles that get applied at the 768px media query and have them return to the previous value. Then re-add them at the appropriate time.

I'm not sure if there's a better way to do it. Recompiling the Bootstrap LESS to your needs is the best (easiest) way. Otherwise, you'll have to find all the CSS media queries that affect your Navbar, overwrite them to default styles @ the 768px width and then revert them back at a higher min-width.

Recompiling the LESS will do all that magic for you just by changing the variable. Which is pretty much the point of LESS/SASS pre-compilers. =)

(note, I did look them all up, it's about 100 lines of code, which is annoy enough for me to drop the idea and just re-compile Bootstrap for a given project and avoid messing something up by accident)

I hope that helps!

Cheers!

Java System.out.print formatting

Use System.out.format

How do I create a simple Qt console application in C++?

I managed to create a simple console "hello world" with QT Creator

used creator 2.4.1 and QT 4.8.0 on windows 7

two ways to do this

Plain C++

do the following

File- new file project
under projects select : other Project
select "Plain C++ Project"
enter project name 5.Targets select Desktop 'tick it'
project managment just click next
you can use c++ commands as normal c++

QT Console

File- new file project
under projects select : other Project
select QT Console Application
Targets select Desktop 'tick it'
project managment just click next
add the following lines (all the C++ includes you need)
add "#include 'iostream' "
add "using namespace std; "
after QCoreApplication a(int argc, cghar *argv[]) 10 add variables, and your program code..

example: for QT console "hello world"

file - new file project 'project name '

other projects - QT Console Application

Targets select 'Desktop'

project management - next

code:

    #include <QtCore/QCoreApplication>
    #include <iostream>
    using namespace std;
    int main(int argc, char *argv[])
    {
     QCoreApplication a(argc, argv);
     cout<<" hello world";
     return a.exec();
     }

ctrl -R to run

compilers used for above MSVC 2010 (QT SDK) , and minGW(QT SDK)

hope this helps someone

As I have just started to use QT recently and also searched the Www for info and examples to get started with simple examples still searching...

What is the best way to programmatically detect porn images?

I would rather allow users report on bad images. Image recognition development can take too much efforts and time and won't be as much as accurate as human eyes. It's much cheaper to outsource that moderation job.

Take a look at: Amazon Mechanical Turk

"The Amazon Mechanical Turk (MTurk) is one of the suite of Amazon Web Services, a crowdsourcing marketplace that enables computer programs to co-ordinate the use of human intelligence to perform tasks which computers are unable to do."

How to kill a child process by the parent process?

Try something like this:

#include <signal.h>

pid_t child_pid = -1 ; //Global

void kill_child(int sig)
{
    kill(child_pid,SIGKILL);
}

int main(int argc, char *argv[])
{
    signal(SIGALRM,(void (*)(int))kill_child);
    child_pid = fork();
    if (child_pid > 0) {
     /*PARENT*/
        alarm(30);
        /*
         * Do parent's tasks here.
         */
        wait(NULL);
    }
    else if (child_pid == 0){
     /*CHILD*/
        /*
         * Do child's tasks here.
         */
    }
}

Get names of all files from a folder with Ruby

Dir.entries(folder)

example:

Dir.entries(".")

Source: http://ruby-doc.org/core/classes/Dir.html#method-c-entries

TypeScript hashmap/dictionary interface

Just as a normal js object:

let myhash: IHash = {};   

myhash["somestring"] = "value"; //set

let value = myhash["somestring"]; //get

There are two things you're doing with [indexer: string] : string

tell TypeScript that the object can have any string-based key
that for all key entries the value MUST be a string type.

You can make a general dictionary with explicitly typed fields by using [key: string]: any;

e.g. age must be number, while name must be a string - both are required. Any implicit field can be any type of value.

As an alternative, there is a Map class:

let map = new Map<object, string>(); 

let key = new Object();

map.set(key, "value");
map.get(key); // return "value"

This allows you have any Object instance (not just number/string) as the key.

Although its relatively new so you may have to polyfill it if you target old systems.

How to get ERD diagram for an existing database?

ERBuilder can generate ER diagram from PostgreSQL databases (reverse engineer feature).

Below step to follow to generate an ER diagram:

• Click on Menu -> File -> reverse engineer

• Click on new connection

• Fill in PostgresSQL connection information

• Click on OK

• Click on next

• Select objects (tables, triggers, sequences…..) that you want to reverse engineer.

• Click on next.

If you are using trial version, your ERD will be displayed automatically.
If your are using the free edition you need to drag and drop the tables from the treeview placed in the left side of application

How can I format DateTime to web UTC format?

You want to use DateTimeOffset class.

var date = new DateTimeOffset(2009, 9, 1, 0, 0, 0, 0, new TimeSpan(0L));
var stringDate = date.ToString("u");

sorry I missed your original formatting with the miliseconds

var stringDate = date.ToString("yyyy'-'MM'-'dd'T'HH':'mm':'ss'.'fff'Z'");

Read a file line by line with VB.NET

Like this... I used it to read Chinese characters...

Dim reader as StreamReader = My.Computer.FileSystem.OpenTextFileReader(filetoimport.Text)
Dim a as String

Do
   a = reader.ReadLine
   '
   ' Code here
   '
Loop Until a Is Nothing

reader.Close()

How to disable JavaScript in Chrome Developer Tools?

Update August 2020

Developer Tools (F12)
Click the Gear icon

Should open the Preference tab
Disable Javascript option is on the far right

Original answer

Developer Tools (F12)
Three vertical dots in upper right
Settings
Under the "Preferences" tab on the left

There will be a "Debugger" section with the option (probably on far right)

View/edit ID3 data for MP3 files

ID3.NET implemented ID3v1.x and ID3v2.3 and supports read/write operations on the ID3 section in MP3 files. There's also a NuGet package available.

How can I remove a child node in HTML using JavaScript?

You should be able to use the .RemoveNode method of the node or the .RemoveChild method of the parent node.

Automatically size JPanel inside JFrame

You can set a layout manager like BorderLayout and then define more specifically, where your panel should go:

MainPanel mainPanel = new MainPanel();
JFrame mainFrame = new JFrame();
mainFrame.setLayout(new BorderLayout());
mainFrame.add(mainPanel, BorderLayout.CENTER);
mainFrame.pack();
mainFrame.setVisible(true);

This puts the panel into the center area of the frame and lets it grow automatically when resizing the frame.

Check if list<t> contains any of another list

If both the list are too big and when we use lamda expression then it will take a long time to fetch . Better to use linq in this case to fetch parameters list:

var items = (from x in parameters
                join y in myStrings on x.Source equals y
                select x)
            .ToList();

How to escape hash character in URL

Percent encoding. Replace the hash with %23.

In Python, how do I create a string of n characters in one line of code?

if you just want any letters:

 'a'*10  # gives 'aaaaaaaaaa'

if you want consecutive letters (up to 26):

 ''.join(['%c' % x for x in range(97, 97+10)])  # gives 'abcdefghij'

List of IP addresses/hostnames from local network in Python

For OSX (and Linux), a simple solution is to use either os.popen or os.system and run the arp -a command.

For example:

devices = []
for device in os.popen('arp -a'): devices.append(device)

This will give you a list of the devices on your local network.

How to mock static methods in c# using MOQ framework?

As mentioned in the other answers MOQ cannot mock static methods and, as a general rule, one should avoid statics where possible.

Sometimes it is not possible. One is working with legacy or 3rd party code or with even with the BCL methods that are static.

A possible solution is to wrap the static in a proxy with an interface which can be mocked

    public interface IFileProxy {
        void Delete(string path);
    }

    public class FileProxy : IFileProxy {
        public void Delete(string path) {
            System.IO.File.Delete(path);
        }
    }

    public class MyClass {

        private IFileProxy _fileProxy;

        public MyClass(IFileProxy fileProxy) {
            _fileProxy = fileProxy;
        }

        public void DoSomethingAndDeleteFile(string path) {
            // Do Something with file
            // ...
            // Delete
            System.IO.File.Delete(path);
        }

        public void DoSomethingAndDeleteFileUsingProxy(string path) {
            // Do Something with file
            // ...
            // Delete
            _fileProxy.Delete(path);

        }
    }

The downside is that the ctor can become very cluttered if there are a lot of proxies (though it could be argued that if there are a lot of proxies then the class may be trying to do too much and could be refactored)

Another possibility is to have a 'static proxy' with different implementations of the interface behind it

   public static class FileServices {

        static FileServices() {
            Reset();
        }

        internal static IFileProxy FileProxy { private get; set; }

        public static void Reset(){
           FileProxy = new FileProxy();
        }

        public static void Delete(string path) {
            FileProxy.Delete(path);
        }

    }

Our method now becomes

    public void DoSomethingAndDeleteFileUsingStaticProxy(string path) {
            // Do Something with file
            // ...
            // Delete
            FileServices.Delete(path);

    }

For testing, we can set the FileProxy property to our mock. Using this style reduces the number of interfaces to be injected but makes dependencies a bit less obvious (though no more so than the original static calls I suppose).

How do I display a text file content in CMD?

There is no built in option available with Windows. To constantly monitor logs you can use this free application BareTailPro.

Is it possible in Java to catch two exceptions in the same catch block?

For Java < 7 you can use if-else along with Exception:

try {
    // common logic to handle both exceptions
} catch (Exception ex) {
    if (ex instanceof Exception1 || ex instanceof Exception2) {

    }
    else {
        throw ex;
        // or if you don't want to have to declare Exception use
        // throw new RuntimeException(ex);
    }
}

Edited and replaced Throwable with Exception.

Html helper for <input type="file" />

To use BeginForm, here's the way to use it:

 using(Html.BeginForm("uploadfiles", 
"home", FormMethod.POST, new Dictionary<string, object>(){{"type", "file"}})

Add a user control to a wpf window

Make sure there is an namespace definition (xmlns) for the namespace your control belong to.

xmlns:myControls="clr-namespace:YourCustomNamespace.Controls;assembly=YourAssemblyName"

<myControls:thecontrol/>

Running .sh scripts in Git Bash

Let's say you have a script script.sh. To run it (using Git Bash), you do the following: [a] Add a "sh-bang" line on the first line (e.g. #!/bin/bash) and then [b]:

# Use ./ (or any valid dir spec):
./script.sh

Note: chmod +x does nothing to a script's executability on Git Bash. It won't hurt to run it, but it won't accomplish anything either.

Why is processing a sorted array faster than processing an unsorted array?

An official answer would be from

Intel - Avoiding the Cost of Branch Misprediction
Intel - Branch and Loop Reorganization to Prevent Mispredicts
Scientific papers - branch prediction computer architecture
Books: J.L. Hennessy, D.A. Patterson: Computer architecture: a quantitative approach
Articles in scientific publications: T.Y. Yeh, Y.N. Patt made a lot of these on branch predictions.

You can also see from this lovely diagram why the branch predictor gets confused.

Each element in the original code is a random value

data[c] = std::rand() % 256;

so the predictor will change sides as the std::rand() blow.

On the other hand, once it's sorted, the predictor will first move into a state of strongly not taken and when the values change to the high value the predictor will in three runs through change all the way from strongly not taken to strongly taken.

How to bring back "Browser mode" in IE11?

How to bring back “Browser mode” in IE11?

Easy way to bring back is just go to Emulation (ctrl +8)

and do change user agent string. (see attached image)

enter image description here

SQL Server dynamic PIVOT query?

There's my solution cleaning up the unnecesary null values

DECLARE @cols AS NVARCHAR(MAX),
@maxcols AS NVARCHAR(MAX),
@query  AS NVARCHAR(MAX)

select @cols = STUFF((SELECT ',' + QUOTENAME(CodigoFormaPago) 
                from PO_FormasPago
                order by CodigoFormaPago
        FOR XML PATH(''), TYPE
        ).value('.', 'NVARCHAR(MAX)') 
    ,1,1,'')

select @maxcols = STUFF((SELECT ',MAX(' + QUOTENAME(CodigoFormaPago) + ') as ' + QUOTENAME(CodigoFormaPago)
                from PO_FormasPago
                order by CodigoFormaPago
        FOR XML PATH(''), TYPE
        ).value('.', 'NVARCHAR(MAX)')
    ,1,1,'')

set @query = 'SELECT CodigoProducto, DenominacionProducto, ' + @maxcols + '
            FROM
            (
                SELECT 
                CodigoProducto, DenominacionProducto,
                ' + @cols + ' from 
                 (
                    SELECT 
                        p.CodigoProducto as CodigoProducto,
                        p.DenominacionProducto as DenominacionProducto,
                        fpp.CantidadCuotas as CantidadCuotas,
                        fpp.IdFormaPago as IdFormaPago,
                        fp.CodigoFormaPago as CodigoFormaPago
                    FROM
                        PR_Producto p
                        LEFT JOIN PR_FormasPagoProducto fpp
                            ON fpp.IdProducto = p.IdProducto
                        LEFT JOIN PO_FormasPago fp
                            ON fpp.IdFormaPago = fp.IdFormaPago
                ) xp
                pivot 
                (
                    MAX(CantidadCuotas)
                    for CodigoFormaPago in (' + @cols + ')
                ) p 
            )  xx 
            GROUP BY CodigoProducto, DenominacionProducto'

t @query;

execute(@query);

How do I get the current date and current time only respectively in Django?

For the date, you can use datetime.date.today() or datetime.datetime.now().date().

For the time, you can use datetime.datetime.now().time().

However, why have separate fields for these in the first place? Why not use a single DateTimeField?

You can always define helper functions on the model that return the .date() or .time() later if you only want one or the other.

Is a DIV inside a TD a bad idea?

No. Not necessarily.

If you need to place a DIV within a TD, be sure you're using the TD properly. If you don't care about tabular-data, and semantics, then you ultimately won't care about DIVs in TDs. I don't think there's a problem though - if you have to do it, you're fine.

According to the HTML Specification

A <div> can be placed where flow content is expected¹, which is the <td> content model².

Difference between <input type='submit' /> and <button type='submit'>text</button>

With <button>, you can use img tags, etc. where text is

<button type='submit'> text -- can be img etc.  </button>

with <input> type, you are limited to text

Finding the index of an item in a list

If you are going to find an index once then using "index" method is fine. However, if you are going to search your data more than once then I recommend using bisect module. Keep in mind that using bisect module data must be sorted. So you sort data once and then you can use bisect. Using bisect module on my machine is about 20 times faster than using index method.

Here is an example of code using Python 3.8 and above syntax:

import bisect
from timeit import timeit

def bisect_search(container, value):
    return (
      index 
      if (index := bisect.bisect_left(container, value)) < len(container) 
      and container[index] == value else -1
    )

data = list(range(1000))
# value to search
value = 666

# times to test
ttt = 1000

t1 = timeit(lambda: data.index(value), number=ttt)
t2 = timeit(lambda: bisect_search(data, value), number=ttt)

print(f"{t1=:.4f}, {t2=:.4f}, diffs {t1/t2=:.2f}")

Output:

t1=0.0400, t2=0.0020, diffs t1/t2=19.60

Can Linux apps be run in Android?

Android does not run X Windows, nor does it have many of the standard GNU libraries. So, since most native linux applications require one or both of these, most will not run.

In addition, even Java programs can be limited, because the version of Java that Android applications are written in is a subset of the standard Java library.

How can I stop "property does not exist on type JQuery" syntax errors when using Typescript?

For your example, you'd add this:

interface JQuery{
    printArea():void;
}

Edit: oops, basarat is correct below. I'm not sure why I thought it was compiling but I've updated this answer.

How to do 3 table JOIN in UPDATE query?

For PostgreSQL example:

UPDATE TableA AS a
SET param_from_table_a=FALSE -- param FROM TableA
FROM TableB AS b
WHERE b.id=a.param_id AND a.amount <> 0;

Git command to show which specific files are ignored by .gitignore

Another option that's pretty clean (No pun intended.):

git clean -ndX

Explanation:

$ git help clean

git-clean - Remove untracked files from the working tree
-n, --dry-run - Don't actually remove anything, just show what would be done.
-d - Remove untracked directories in addition to untracked files.
-X - Remove only files ignored by Git.

Note: This solution will not show ignored files that have already been removed.

How to use Jackson to deserialise an array of objects

From Eugene Tskhovrebov

List<MyClass> myObjects = Arrays.asList(mapper.readValue(json, MyClass[].class))

This solution seems to be the best for me.

Running an outside program (executable) in Python?

By using os.system:

import os
os.system(r'"C:/Documents and Settings/flow_model/flow.exe"')

Serialize Class containing Dictionary member

You should explore Json.Net, quite easy to use and allows Json objects to be deserialized in Dictionary directly.

james_newtonking

example:

string json = @"{""key1"":""value1"",""key2"":""value2""}";
Dictionary<string, string> values = JsonConvert.DeserializeObject<Dictionary<string, string>>(json); 
Console.WriteLine(values.Count);
// 2
Console.WriteLine(values["key1"]);
// value1

How to ensure that there is a delay before a service is started in systemd?

The systemd way to do this is to have the process "talk back" when it's setup somehow, like by opening a socket or sending a notification (or a parent script exiting). Which is of course not always straight-forward especially with third party stuff :|

You might be able to do something inline like

ExecStart=/bin/bash -c '/bin/start_cassandra &; do_bash_loop_waiting_for_it_to_come_up_here'

or a script that does the same. Or put do_bash_loop_waiting_for_it_to_come_up_here in an ExecStartPost

Or create a helper .service that waits for it to come up, so the helper service depends on cassandra, and waits for it to come up, then your other process can depend on the helper service.

(May want to increase TimeoutStartSec from the default 90s as well)

Missing artifact com.sun:tools:jar

I ran into the same problem and the way I was able to resolve it was add the dependency location of tools.jar into the pom.xml. Like so:

 <dependency>
   <groupId>com.sun</groupId>
   <artifactId>tools</artifactId>
   <version>1.6</version>
   <scope>system</scope>
   <systemPath>C:\Program Files\Java\jdk1.6.0_29\lib\tools.jar</systemPath>
 </dependency>

Make sure you change the <systemPath> to where ever your tools.jar file is located.

How to simulate a mouse click using JavaScript?

JavaScript Code

   //this function is used to fire click event
    function eventFire(el, etype){
      if (el.fireEvent) {
        el.fireEvent('on' + etype);
      } else {
        var evObj = document.createEvent('Events');
        evObj.initEvent(etype, true, false);
        el.dispatchEvent(evObj);
      }
    }

function showPdf(){
  eventFire(document.getElementById('picToClick'), 'click');
}

HTML Code

<img id="picToClick" data-toggle="modal" data-target="#pdfModal" src="img/Adobe-icon.png" ng-hide="1===1">
  <button onclick="showPdf()">Click me</button>

A top-like utility for monitoring CUDA activity on a GPU

Download and install latest stable CUDA driver (4.2) from here. On linux, nVidia-smi 295.41 gives you just what you want. use nvidia-smi:

[root@localhost release]# nvidia-smi 
Wed Sep 26 23:16:16 2012       
+------------------------------------------------------+                       
| NVIDIA-SMI 3.295.41   Driver Version: 295.41         |                       
|-------------------------------+----------------------+----------------------+
| Nb.  Name                     | Bus Id        Disp.  | Volatile ECC SB / DB |
| Fan   Temp   Power Usage /Cap | Memory Usage         | GPU Util. Compute M. |
|===============================+======================+======================|
| 0.  Tesla C2050               | 0000:05:00.0  On     |         0          0 |
|  30%   62 C  P0    N/A /  N/A |   3%   70MB / 2687MB |   44%     Default    |
|-------------------------------+----------------------+----------------------|
| Compute processes:                                               GPU Memory |
|  GPU  PID     Process name                                       Usage      |
|=============================================================================|
|  0.  7336     ./align                                                 61MB  |
+-----------------------------------------------------------------------------+

EDIT: In latest NVIDIA drivers, this support is limited to Tesla Cards.

How to get Chrome to allow mixed content?

Chrome 46 and newer should be showing mixed content without any warning, just without the green lock in address bar.

Source: Simplifying the Page Security Icon in Chrome at Google Online Security Blog.

Angular exception: Can't bind to 'ngForIn' since it isn't a known native property

my solution was - just remove '*' character from the expression ^__^

<div ngFor="let talk in talks">

How to find index of all occurrences of element in array?

We can use Stack and push "i" into the stack every time we encounter the condition "arr[i]==value"

Check this:

static void getindex(int arr[], int value)
{
    Stack<Integer>st= new Stack<Integer>();
    int n= arr.length;
    for(int i=n-1; i>=0 ;i--)
    {
        if(arr[i]==value)
        {
            st.push(i);
        }
    }   
    while(!st.isEmpty())
    {
        System.out.println(st.peek()+" ");
        st.pop(); 
    }
}

How to make lists contain only distinct element in Python?

From http://www.peterbe.com/plog/uniqifiers-benchmark:

def f5(seq, idfun=None):  
    # order preserving
    if idfun is None:
        def idfun(x): return x
    seen = {}
    result = []
    for item in seq:
        marker = idfun(item)
        # in old Python versions:
        # if seen.has_key(marker)
        # but in new ones:
        if marker in seen: continue
        seen[marker] = 1
        result.append(item)
    return result

Add a new element to an array without specifying the index in Bash

Yes there is:

ARRAY=()
ARRAY+=('foo')
ARRAY+=('bar')

Bash Reference Manual:

In the context where an assignment statement is assigning a value to a shell variable or array index (see Arrays), the ‘+=’ operator can be used to append to or add to the variable's previous value.

What does "@" mean in Windows batch scripts

By default, a batch file will display its command as it runs. The purpose of this first command which @echo off is to turn off this display. The command "echo off" turns off the display for the whole script, except for the "echo off" command itself. The "at" sign "@" in front makes the command apply to itself as well.

Android : change button text and background color

Just use a MaterialButton and the app:backgroundTint and android:textColor attributes:

<MaterialButton
  app:backgroundTint="@color/my_color"
  android:textColor="@android:color/white"/>

How to find difference between two columns data?

Yes, you can select the data, calculate the difference, and insert all values in the other table:

insert into #temp2 (Difference)
select previous - Present
from #TEMP1

How to set border's thickness in percentages?

So this is an older question, but for those still looking for an answer, the CSS property Box-Sizing is priceless here:

-webkit-box-sizing: border-box; /* Safari/Chrome, other WebKit  */
-moz-box-sizing: border-box;    /* Firefox, other Gecko         */
box-sizing: border-box;

It means that you can set the width of the Div to a percentage, and any border you add to the div will be included within that percentage. So, for example, the following would add the 1px border to the inside of the width of the div:

div { box-sizing:border-box; width:50%; border-right:1px solid #000; }

If you'd like more info: http://css-tricks.com/box-sizing/

matplotlib: how to draw a rectangle on image

You need use patches.

import matplotlib.pyplot as plt
import matplotlib.patches as patches

fig2 = plt.figure()
ax2 = fig2.add_subplot(111, aspect='equal')

ax2.add_patch(
     patches.Rectangle(
        (0.1, 0.1),
        0.5,
        0.5,
        fill=False      # remove background
     ) ) 
fig2.savefig('rect2.png', dpi=90, bbox_inches='tight')

How to enable CORS in flask

My solution is a wrapper around app.route:

def corsapp_route(path, origin=('127.0.0.1',), **options):
    """
    Flask app alias with cors
    :return:
    """

    def inner(func):
        def wrapper(*args, **kwargs):
            if request.method == 'OPTIONS':
                response = make_response()
                response.headers.add("Access-Control-Allow-Origin", ', '.join(origin))
                response.headers.add('Access-Control-Allow-Headers', ', '.join(origin))
                response.headers.add('Access-Control-Allow-Methods', ', '.join(origin))
                return response
            else:
                result = func(*args, **kwargs)
            if 'Access-Control-Allow-Origin' not in result.headers:
                result.headers.add("Access-Control-Allow-Origin", ', '.join(origin))
            return result

        wrapper.__name__ = func.__name__

        if 'methods' in options:
            if 'OPTIONS' in options['methods']:
                return app.route(path, **options)(wrapper)
            else:
                options['methods'].append('OPTIONS')
                return app.route(path, **options)(wrapper)

        return wrapper

    return inner

@corsapp_route('/', methods=['POST'], origin=['*'])
def hello_world():
    ...

Selecting default item from Combobox C#

this is the correct form:

comboBox1.Text = comboBox1.Items[0].ToString();

U r welcome

How do I change TextView Value inside Java Code?

First we need to find a Button:

Button mButton = (Button) findViewById(R.id.my_button);

After that, you must implement View.OnClickListener and there you should find the TextView and execute the method setText:

mButton.setOnClickListener(new View.OnClickListener {
    public void onClick(View v) {
        final TextView mTextView = (TextView) findViewById(R.id.my_text_view);
        mTextView.setText("Some Text");
    }
});

How do I get a div to float to the bottom of its container?

Put the div in another div and set the parent div's style to position:relative; Then on the child div set the following CSS properties: position:absolute; bottom:0;

How do you set the document title in React?

You can use React Helmet:

import React from 'react'
import { Helmet } from 'react-helmet'

const TITLE = 'My Page Title'

class MyComponent extends React.PureComponent {
  render () {
    return (
      <>
        <Helmet>
          <title>{ TITLE }</title>
        </Helmet>
        ...
      </>
    )
  }
}

Compare two MySQL databases

I'm working with Nob Hill's Marketing team, I wanted to tell you I'll be happy to hear your questions, suggestion or anything else, please feel free to contact me.

We originally decided to create our tool from scratch because while there are other such products on the market, none of them do the job right. It’s quite easy to show you the differences between databases. It’s quite another to actually make one database like the other. Smooth migration, both of schema and data, has always been a challenge. Well, we have achieved it here.
We are so confident that it could provide you a smooth migration, than if it doesn’t – if the migration scripts it generates are not readable enough or won’t work for you, and we can’t fix it in five business days – you will get your own free copy!

http://www.nobhillsoft.com/NHDBCompare.aspx

How to check if an int is a null

You have to access to your class atributes.

To access to it atributes, you have to do:

person.id
person.name

where

person

is an instance of your class Person.

This can be done if the attibutes can be accessed, if not, you must use setters and getters...

Sleep for milliseconds

In Unix you can use usleep.

In Windows there is Sleep.

Programs & Examples On #Frames

Any way of using frames in HTML5?

Overcoming "Display forbidden by X-Frame-Options"

Meaning of "referencing" and "dereferencing" in C

How to create empty data frame with column names specified in R?

Can a foreign key refer to a primary key in the same table?

How to call function that takes an argument in a Django template?

What does "ulimit -s unlimited" do?

How do I set the path to a DLL file in Visual Studio?

What is the difference between a Shared Project and a Class Library in Visual Studio 2015?

How to go back last page

The forked VM terminated without saying properly goodbye. VM crash or System.exit called

Removing first x characters from string?

Redis command to get all available keys?

What's is the difference between train, validation and test set, in neural networks?

In simple words define Training set, Test set, Validation set

How can I detect if this dictionary key exists in C#?

Find the PID of a process that uses a port on Windows

IF EXIST C:\directory\ goto a else goto b problems windows XP batch files

How to Copy Text to Clip Board in Android?

Create a dropdown component

Could not load file or assembly 'CrystalDecisions.ReportAppServer.CommLayer, Version=13.0.2000.0

Get querystring from URL using jQuery

CSS3 Transition - Fade out effect

How to show matplotlib plots in python

How do I change selected value of select2 dropdown with JqGrid?

if statements matching multiple values

VBA copy cells value and format

How to get current user who's accessing an ASP.NET application?

fstream won't create a file

Create a HTML table where each TR is a FORM

How to calculate UILabel height dynamically?

how to save canvas as png image?

What is a 'NoneType' object?

What's the best way to identify hidden characters in the result of a query in SQL Server (Query Analyzer)?

Passing base64 encoded strings in URL

need to add a class to an element

Angular2 change detection: ngOnChanges not firing for nested object

If (Array.Length == 0)

How do you round a number to two decimal places in C#?

Check if Key Exists in NameValueCollection

How to include js file in another js file?

VBA general way for pulling data out of SAP

Example Code

Script Recording

Edit: Early and Late binding

Update multiple columns in SQL

Why is the jquery script not working?

How to enable file upload on React's Material UI simple input?

What is Python Whitespace and how does it work?

How to change the size of the radio button using CSS?

How to display Woocommerce Category image?

How should I cast in VB.NET?

SQL Group By with an Order By

change image opacity using javascript

How can I merge properties of two JavaScript objects dynamically?

What's the difference between event.stopPropagation and event.preventDefault?

Check if a value is an object in JavaScript

How can I replace non-printable Unicode characters in Java?

Is it possible to create static classes in PHP (like in C#)?

Else clause on Python while statement

How to change the date format of a DateTimePicker in vb.net

vim - How to delete a large block of text without counting the lines?

How to clear https proxy setting of NPM?

JavaScript Adding an ID attribute to another created Element

How to implement a property in an interface

How to squash all git commits into one?

Invariant Violation: Could not find "store" in either the context or props of "Connect(SportsDatabase)"

Printing integer variable and string on same line in SQL

Java.lang.NoClassDefFoundError: com/fasterxml/jackson/databind/exc/InvalidDefinitionException

Random float number generation

Calendar Recurring/Repeating Events - Best Storage Method

Concrete Javascript Regex for Accented Characters (Diacritics)

Python logging not outputting anything

Correct way to find max in an Array in Swift

how to find my angular version in my project?

How to call code behind server method from a client side JavaScript function?

grep from tar.gz without extracting [faster one]

sudo: port: command not found

Slack clean all messages (~8K) in a channel