Try this method.

public static Type GetType(string typeName)
{
    var type = Type.GetType(typeName);
    if (type != null) return type;
    foreach (var a in AppDomain.CurrentDomain.GetAssemblies())
    {
        type = a.GetType(typeName);
        if (type != null)
            return type;
    }
    return null;
}

sudo apt-get install libz-dev in ubuntu.

Installing Miniconda on Raspberry Pi and adding Python 3.5 / 3.6

Skip the first section if you have already installed Miniconda successfully.

Installation of Miniconda on Raspberry Pi

wget http://repo.continuum.io/miniconda/Miniconda3-latest-Linux-armv7l.sh
sudo md5sum Miniconda3-latest-Linux-armv7l.sh
sudo /bin/bash Miniconda3-latest-Linux-armv7l.sh

Accept the license agreement with yes

When asked, change the install location: /home/pi/miniconda3

Do you wish the installer to prepend the Miniconda3 install location to PATH in your /root/.bashrc ? yes

Now add the install path to the PATH variable:

sudo nano /home/pi/.bashrc

Go to the end of the file .bashrc and add the following line:

export PATH="/home/pi/miniconda3/bin:$PATH"

Save the file and exit.

To test if the installation was successful, open a new terminal and enter

conda

If you see a list with commands you are ready to go.

But how can you use Python versions greater than 3.4 ?

Adding Python 3.5 / 3.6 to Miniconda on Raspberry Pi

After the installation of Miniconda I could not yet install Python versions higher than Python 3.4, but i needed Python 3.5. Here is the solution which worked for me on my Raspberry Pi 4:

First i added the Berryconda package manager by jjhelmus (kind of an up-to-date version of the armv7l version of Miniconda):

conda config --add channels rpi

Only now I was able to install Python 3.5 or 3.6 without the need for compiling it myself:

conda install python=3.5
conda install python=3.6

Afterwards I was able to create environments with the added Python version, e.g. with Python 3.5:

conda create --name py35 python=3.5

The new environment "py35" can now be activated:

source activate py35

Using Python 3.7 on Raspberry Pi

Currently Jonathan Helmus, who is the developer of berryconda, is working on adding Python 3.7 support, if you want to see if there is an update or if you want to support him, have a look at this pull request. (update 20200623) berryconda is now inactive, This project is no longer active, no recipe will be updated and no packages will be added to the rpi channel. If you need to run Python 3.7 on your Pi right now, you can do so without Miniconda. Check if you are running the latest version of Raspbian OS called Buster. Buster ships with Python 3.7 preinstalled (source), so simply run your program with the following command:

Python3.7 app-that-needs-python37.py

I hope this solution will work for you too!

If anyone gets

ERROR: Module phpX.X does not exist!

just install the module for your current php version:

apt-get install libapache2-mod-phpX.X

a similar issue is for Visual studio 2015 RC. Sometimes it loses the ability to open RC: you double click but editor do not one menus and dialogs.

Right click on the file *.rc, it will open:

And change as following:

I use this...but have never done any metro app development, so I don't know of any restrictions on libraries available to you. (note, you'll need to mark your classes as with DataContract and DataMember attributes)

public static class JSONSerializer<TType> where TType : class
{
    /// <summary>
    /// Serializes an object to JSON
    /// </summary>
    public static string Serialize(TType instance)
    {
        var serializer = new DataContractJsonSerializer(typeof(TType));
        using (var stream = new MemoryStream())
        {
            serializer.WriteObject(stream, instance);
            return Encoding.Default.GetString(stream.ToArray());
        }
    }

    /// <summary>
    /// DeSerializes an object from JSON
    /// </summary>
    public static TType DeSerialize(string json)
    {
        using (var stream = new MemoryStream(Encoding.Default.GetBytes(json)))
        {
            var serializer = new DataContractJsonSerializer(typeof(TType));
            return serializer.ReadObject(stream) as TType;
        }
    }
}

So, if you had a class like this...

[DataContract]
public class MusicInfo
{
    [DataMember]
    public string Name { get; set; }

    [DataMember]
    public string Artist { get; set; }

    [DataMember]
    public string Genre { get; set; }

    [DataMember]
    public string Album { get; set; }

    [DataMember]
    public string AlbumImage { get; set; }

    [DataMember]
    public string Link { get; set; }

}

Then you would use it like this...

var musicInfo = new MusicInfo
{
     Name = "Prince Charming",
     Artist = "Metallica",
     Genre = "Rock and Metal",
     Album = "Reload",
     AlbumImage = "http://up203.siz.co.il/up2/u2zzzw4mjayz.png",
     Link = "http://f2h.co.il/7779182246886"
};

// This will produce a JSON String
var serialized = JSONSerializer<MusicInfo>.Serialize(musicInfo);

// This will produce a copy of the instance you created earlier
var deserialized = JSONSerializer<MusicInfo>.DeSerialize(serialized);

This is an extension to what @pellucide has done, but for Macs:

To determine the number of seconds since epoch (Jan 1 1970) for any given date (e.g. Oct 21 1973)

$ date -j -f "%b %d %Y %T" "Oct 21 1973 00:00:00" "+%s"
120034800

Please note, that for completeness, I have added the time part to the format. The reason being is that date will take whatever date part you gave it and add the current time to the value provided. For example, if you execute the above command at 4:19PM, without the '00:00:00' part, it will add the time automatically. Such that "Oct 21 1973" will be parsed as "Oct 21 1973 16:19:00". That may not be what you want.

To convert your timestamp back to a date:

$ date -j -r 120034800
Sun Oct 21 00:00:00 PDT 1973

Apple's man page for the date implementation: https://developer.apple.com/library/mac/documentation/Darwin/Reference/ManPages/man1/date.1.html

htmlspecialchars () does the minimum amount of encoding to ensure that your string is not parsed as HTML. This leaves your string more human-readable than it would be if you used htmlentities () to encode absolutely everything that has an encoding.

Both answers are correct. If you user .TO -method then the semicolumn is OK - but not for the addrecipients-method. There you need to split, e.g. :

                Dim Splitter() As String
                Splitter = Split(AddrMail, ";")
                For Each Dest In Splitter
                    .Recipients.Add (Trim(Dest))
                Next

What about: (unique condition)

if (bool(a) + bool(b) + bool(c) == 1):

Notice, if you allow two conditions too you could do that

if (bool(a) + bool(b) + bool(c) in [1,2]):

Quickly scripted the accepted answer's procedure in bash:

#!/usr/bin/env bash
DATABASES="$(mysql -e 'show databases \G' | grep "^Database" | grep -v '^Database: mysql$\|^Database: binlog$\|^Database: performance_schema\|^Database: information_schema' | sed 's/^Database: //g')"
mysqldump --databases $DATABASES -r alldatabases.sql && echo "$DATABASES" | while read -r DB; do
    mysql -e "drop database \`$DB\`"
done && \
    /etc/init.d/mysql stop && \
    find /var/lib/mysql -maxdepth 1 -type f \( -name 'ibdata1' -or -name 'ib_logfile*' \) -delete && \
    /etc/init.d/mysql start && \
    mysql < alldatabases.sql && \
    rm -f alldatabases.sql

Save as purge_binlogs.sh and run as root.

Excludes mysql, information_schema, performance_schema (and binlog directory).

Assumes you have administrator credendials in /root/.my.cnf and that your database lives in default /var/lib/mysql directory.

You can also purge binary logs after running this script to regain more disk space with:

PURGE BINARY LOGS BEFORE CURRENT_TIMESTAMP;

You can use String.valueOf method.

For example,

char[] a = {'h', 'e', 'l', 'l', 'o', ' ', 'w', 'o', 'r', 'l', 'd'};
String b = String.valueOf(a);
System.out.println("Char Array back to String is: " + b);

For more on char array to string you can refer links below

https://docs.oracle.com/javase/7/docs/api/java/lang/String.html

https://www.flowerbrackets.com/convert-char-array-to-string-java/

this is how you do it with ActionLIstener

import java.awt.FlowLayout;
import java.awt.event.*;

import javax.swing.*;

public class MyWind extends JFrame{

    public MyWind() {
        initialize();
    }

    private void initialize() {
        setSize(300, 300);
        setLayout(new FlowLayout(FlowLayout.LEFT));
        setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        final JTextField field = new JTextField();
        field.setSize(200, 50);
        field.setText("              ");

        JComboBox comboBox = new JComboBox();
        comboBox.setEditable(true);
        comboBox.addItem("item1");
        comboBox.addItem("item2");

        //
        // Create an ActionListener for the JComboBox component.
        //
        comboBox.addActionListener(new ActionListener() {
            public void actionPerformed(ActionEvent event) {
                //
                // Get the source of the component, which is our combo
                // box.
                //
                JComboBox comboBox = (JComboBox) event.getSource();

                Object selected = comboBox.getSelectedItem();
                if(selected.toString().equals("item1"))
                field.setText("30");
                else if(selected.toString().equals("item2"))
                    field.setText("40");

            }
        });
        getContentPane().add(comboBox);
        getContentPane().add(field);
    }

    public static void main(String[] args) {
        SwingUtilities.invokeLater(new Runnable() {
            public void run() {
                new MyWind().setVisible(true);
            }
        });
    }
}

Two Method

• using homebrew auto install:
  • Steps:
    • brew install gradle
  • Pros and cons
    • Pros: easy
    • Cons: (probably) not latest version
• manually install (for latest version):
  • Pros and cons
    • Pros: use your expected any (or latest) version
    • Cons: need self to do it
  • Steps
    • download latest version binary (gradle-6.0.1) from Gradle | Releases
    • unzip it (gradle-6.0.1-all.zip) and added gradle path into environment variable PATH
      • normally is edit and add following config into your startup script( ~/.bashrc or ~/.zshrc etc.):

export GRADLE_HOME=/path_to_your_gradle/gradle-6.0.1
export PATH=$GRADLE_HOME/bin:$PATH

some other basic note

Q: How to make PATH take effect immediately?

A: use source:

source ~/.bashrc

it will make/execute your .bashrc, so make PATH become your expected latest values, which include your added gradle path.

Q: How to check PATH is really take effect/working now?

A: use echo to see your added path in indeed in your PATH

?  ~ echo $PATH
xxx:/Users/crifan/dev/dev_tool/java/gradle/gradle-6.0.1/bin:xxx

you can see we added /Users/crifan/dev/dev_tool/java/gradle/gradle-6.0.1/bin into your PATH

Q: How to verify gradle is installed correctly on my Mac ?

A: use which to make sure can find gradle

?  ~ which gradle
/Users/crifan/dev/dev_tool/java/gradle/gradle-6.0.1/bin/gradle

AND to check and see gradle version

?  ~ gradle --version

------------------------------------------------------------
Gradle 6.0.1
------------------------------------------------------------

Build time:   2019-11-18 20:25:01 UTC
Revision:     fad121066a68c4701acd362daf4287a7c309a0f5

Kotlin:       1.3.50
Groovy:       2.5.8
Ant:          Apache Ant(TM) version 1.10.7 compiled on September 1 2019
JVM:          1.8.0_112 (Oracle Corporation 25.112-b16)
OS:           Mac OS X 10.14.6 x86_64

this means the (latest) gradle is correctly installed on your mac ^_^.

for more detail please refer my (Chinese) post ?????mac???maven

Pass float to sleep, like sleep 0.1

You can use $addToSet with the aggregation framework to count distinct objects.

For example:

db.collectionName.aggregate([{
    $group: {_id: null, uniqueValues: {$addToSet: "$fieldName"}}
}])

For those of you who migrate from Eclipse to IntelliJ or the other way around here is a tip when working with property files or other resource files.

Its maddening (cost my a whole evening to find out) but both IDE's work quite different when it comes to looking for resource/propertty files when you want to run locally from your IDE or during debugging. (Packaging to a .jar is also quite different, but thats documented better.)

Suppose you have a relative path referral like this in your code:

new FileInputStream("xxxx.properties");

(which is convenient if you work with env specific .properties files which you don't want to package along with your JAR)

INTELLIJ

(I use 13.1 , but could be valid for more versions)

The file xxxx.properties needs to be at the PARENT dir of the project ROOT in order to be picked up at runtime like this in IntelliJ. (The project ROOT is where the /src folder resides in)

ECLIPSE

Eclipse is just happy when the xxxx.properties file is at the project ROOT itself.

So IntelliJ expects .properties file to be 1 level higher then Eclipse when it is referenced like this !!

This also affects the way you have to execute your code when you have this same line of code ( new FileInputStream("xxxx.properties"); ) in your exported .jar. When you want to be agile and don't want to package the .properties file with your jar you'll have to execute the jar like below in order to reference the .properties file correctly from the command line:

INTELLIJ EXPORTED JAR

java -cp "/path/to_properties_file/:/path/to_jar/some.jar" com.bla.blabla.ClassContainingMainMethod

ECLIPSE EXPORTED JAR

java -jar some.jar

where the Eclipse exported executable jar will just expect the referenced .properties file to be on the same location as where the .jar file is

I met this problem today, and fix it with bellowed steps.

1, Check the log file /var/log/mysqld.log

tail -f /var/log/mysqld.log

 2017-03-14T07:06:53.374603Z 0 [ERROR] /usr/sbin/mysqld: Can't create/write to file '/var/run/mysqld/mysqld.pid' (Errcode: 2 - No such file or directory)
 2017-03-14T07:06:53.374614Z 0 [ERROR] Can't start server: can't create PID file: No such file or directory

The log says that there isn't a file or directory /var/run/mysqld/mysqld.pid

2, Create the directory /var/run/mysqld

mkdir -p /var/run/mysqld/

3, Start the mysqld again service mysqld start, but still fail, check the log again /var/log/mysqld.log

2017-03-14T07:14:22.967667Z 0 [ERROR] /usr/sbin/mysqld: Can't create/write to file '/var/run/mysqld/mysqld.pid' (Errcode: 13 - Permission denied)
2017-03-14T07:14:22.967678Z 0 [ERROR] Can't start server: can't create PID file: Permission denied

It saids permission denied.

4, Grant the permission to mysql chown mysql.mysql /var/run/mysqld/

5, Restart the mysqld

# service mysqld restart
Restarting mysqld (via systemctl):                         [  OK  ]

I've just solved the problem.I found that the nodes in the App.config file have configed wrong.

<client>
<endpoint name="WCF_QtrwiseSalesService" binding="wsHttpBinding" bindingConfiguration="ws" address="http://cntgbs1131:9005/MyService/TGE.ISupplierClientManager" contract="*">
</endpoint>
</client>

<bindings>
    <wsHttpBinding>
        <binding name="ws" maxBufferPoolSize="2147483647" maxReceivedMessageSize="2147483647" messageEncoding="Text">
            <readerQuotas maxDepth="2147483647" maxStringContentLength="2147483647" maxArrayLength="2147483647" maxBytesPerRead="2147483647" maxNameTableCharCount="2147483647"/>
            <**security mode="None">**
                <transport clientCredentialType="None"></transport>
            </security>
        </binding>
    </wsHttpBinding>
</bindings>

Confirm your config in the node <security>,the attribute "mode" value is "None". If your value is "Transport",the error occurs.

Use a regular expression on a string:

def is_numeric?(obj) 
   obj.to_s.match(/\A[+-]?\d+?(\.\d+)?\Z/) == nil ? false : true
end

If you want to check if a variable is of certain type, you can simply use kind_of?:

1.kind_of? Integer #true
(1.5).kind_of? Float #true
is_numeric? "545"  #true
is_numeric? "2aa"  #false

The $_post function need the name value like:

<input type="submit" value"Submit" name="example">

Call

$var = strip_tags($_POST['example']);
if (isset($var)){
    // your code here
}

First you need to create the config file, using cmd : jupyter notebook --generate-config Then, search for C:\Users\your_username\.jupyter folder (Search for that folder), and right click edit the jupyter_notebook_config.py.

Then, Ctrl+F: #c.NotebookApp.notebook_dir ='' . Note that the quotes are single quotes. Select your directory you want to have as home for your jupyter, and copy it with Ctrl+C, for example: C:\Users\username\Python Projects.

Then on that line, paste it like this : c.NotebookApp.notebook_dir = 'C:\\Users\\username\\Python Projects'

Make sure to remove #, as it is as comment.

Make sure to double slash \\ on each name of your path. Ctrl+S to save the config.py file !!!

Go back to your cmd and run jupyter notebook. It should be in your directory of choice. Test it by making a folder and watch your directory from your computer.

import re
string = re.sub('[ \t\n]+', ' ', 'The     quick brown                \n\n             \t        fox')

This will remove all the tabs, new lines and multiple white spaces with single white space.

Sendmail wasn't working for me so I used msmtp 1.6.2 w32 and most just followed the instructions at DeveloperSide. Here is a quick rundown of the setup for posterity:

Enabled IMAP access under your Gmail account (the one msmtp is sending emails from)

Enable access for less secure apps. Log into your google account and go here

Edit php.ini, find and change each setting below to reflect the following:

; These are commented out by prefixing a semicolon
;SMTP = localhost
;smtp_port = 25

; Set these paths to where you put your msmtp files.
; I used backslashes in php.ini and it works fine.
; The example in the devside guide uses forwardslashes. 
sendmail_path = "C:\wamp64\msmtp\msmtp.exe -d -C C:\wamp64\msmtp\msmtprc.ini -t --read-envelope-from"

mail.log = "C:\wamp64\msmtp\maillog.txt"

Create and edit the file msmtprc.ini in the same directory as your msmtp.exe file as follows, replacing it with your own email and password:

# Default values for all accounts
defaults
tls_certcheck off
# I used forward slashes here and it works.
logfile C:/wamp64/msmtp/msmtplog.txt

account Gmail
host smtp.gmail.com
port 587
auth on
tls on
from [email protected]
user [email protected]
password ReplaceWithYourPassword
account default : gmail

this, should work: git push origin local-name:remote-name

Better, for GitLab I use a second "origin", say "origin2":

git remote add origin2 ...
then

git push origin2 master

The conventional (short) git push should work implicitly as with the 1st "origin"

str = "[12,23,987,43"

str[0] = ""

It is more that the media validates the string encoding, so we want to ensure that the data is acceptable by a handling application (and doesn't contain a binary sequence representing EOL for example)

Imagine you want to send binary data in an email with encoding UTF-8 -- The email may not display correctly if the stream of ones and zeros creates a sequence which isn't valid Unicode in UTF-8 encoding.

The same type of thing happens in URLs when we want to encode characters not valid for a URL in the URL itself:

http://www.foo.com/hello my friend -> http://www.foo.com/hello%20my%20friend

This is because we want to send a space over a system that will think the space is smelly.

All we are doing is ensuring there is a 1-to-1 mapping between a known good, acceptable and non-detrimental sequence of bits to another literal sequence of bits, and that the handling application doesn't distinguish the encoding.

In your example, man may be valid ASCII in first form; but often you may want to transmit values that are random binary (ie sending an image in an email):

MIME-Version: 1.0
Content-Description: "Base64 encode of a.gif"
Content-Type: image/gif; name="a.gif"
Content-Transfer-Encoding: Base64
Content-Disposition: attachment; filename="a.gif"

Here we see that a GIF image is encoded in base64 as a chunk of an email. The email client reads the headers and decodes it. Because of the encoding, we can be sure the GIF doesn't contain anything that may be interpreted as protocol and we avoid inserting data that SMTP or POP may find significant.

Wrap the <form> element inside a div container and apply css to the div instead which makes things easier.

#aDiv{width: 300px; height: 300px; margin: 0 auto;}

<html>_x000D_
_x000D_
<head></head>_x000D_
_x000D_
<body>_x000D_
  <div>_x000D_
    <form>_x000D_
      <div id="aDiv">_x000D_
        <table>_x000D_
          <tr>_x000D_
            <td>Name :</td>_x000D_
            <td>_x000D_
              <input type="text" name="name">_x000D_
            </td>_x000D_
            <br>_x000D_
          </tr>_x000D_
          <tr>_x000D_
            <td>Email :</td>_x000D_
            <td>_x000D_
              <input type="text" name="email">_x000D_
            </td>_x000D_
            <br>_x000D_
          </tr>_x000D_
          <tr>_x000D_
            <td>Password :</td>_x000D_
            <td>_x000D_
              <input type="password" name="pwd">_x000D_
            </td>_x000D_
            <br>_x000D_
          </tr>_x000D_
          <tr>_x000D_
            <td>Confirm Password :</td>_x000D_
            <td>_x000D_
              <input type="password" name="cpwd">_x000D_
              <br>_x000D_
          </tr>_x000D_
          <tr>_x000D_
            <td>_x000D_
              <input type="submit" value="Submit">_x000D_
            </td>_x000D_
          </tr>_x000D_
        </table>_x000D_
      </div>_x000D_
    </form>_x000D_
  </div>_x000D_
</body>_x000D_
_x000D_
</html>

I would iterate over the results array using an angularjs filter like this:

var foundResultObject = getObjectFromResultsList(results, 1);

function getObjectFromResultsList(results, resultIdToRetrieve) {
        return $filter('filter')(results, { id: resultIdToRetrieve }, true)[0];
    }

The comparison needs to be evaluated fully inside EL ${ ... }, not outside.

<c:if test="${values.type eq 'object'}">

As to the docs, those ${} things are not JSTL, but EL (Expression Language) which is a whole subject at its own. JSTL (as every other JSP taglib) is just utilizing it. You can find some more EL examples here.

<c:if test="#{bean.booleanValue}" />
<c:if test="#{bean.intValue gt 10}" />
<c:if test="#{bean.objectValue eq null}" />
<c:if test="#{bean.stringValue ne 'someValue'}" />
<c:if test="#{not empty bean.collectionValue}" />
<c:if test="#{not bean.booleanValue and bean.intValue ne 0}" />
<c:if test="#{bean.enumValue eq 'ONE' or bean.enumValue eq 'TWO'}" />

See also:

• Our EL wiki page

By the way, unrelated to the concrete problem, if I guess your intent right, you could also just call Object#getClass() and then Class#getSimpleName() instead of adding a custom getter.

<c:forEach items="${list}" var="value">
    <c:if test="${value['class'].simpleName eq 'Object'}">
        <!-- code here -->
    </c:if>
</c:forEeach>

See also:

• instanceof check in EL expression language

On Notepadd++ v7.5.9 (32-bits), "Indent by fold" plugin is working fine with html content.

1. Search and install in plugin manager
2. Use "Plugins" > "Indent by fold" > "Reindent file"

https://www.fesevur.com/indentbyfold/

You'll want to use the GetExtensionName method on the FileSystemObject object.

Set x = CreateObject("scripting.filesystemobject")
WScript.Echo x.GetExtensionName("foo.pdf")

In your example, try using this

For Each objFile in colFiles
    If UCase(objFSO.GetExtensionName(objFile.name)) = "PDF" Then
        Wscript.Echo objFile.Name
    End If
Next

this worked:

System.out.println("resultList.toString() " + resultList);
            org.json.JSONObject obj = new JSONObject(resultList);
            org.json.JSONArray jsonArray = obj.getJSONArray(someField);

            for(int i=0;i<jsonArray.length();i++){
                System.out.println("array is " + jsonArray.get(i));

            }

The answers above are just not correct. A SQL Script even with data is not a backup. A backup is a BAK file that contains the full database in its current structure including indizes.

Of course a BAK file containg the full backup with all data and indizes from a remote SQL Server database can be retrieved on a local system.

This can be done with commercial software, to directly save a backup BAK file to your local machine, for example This one will directly create a backup from a remote SQL db on your local machine.

Also do note when specifying DATETIME as DATETIME(3) or like on MySQL 5.7.x, you also have to add the same value for CURRENT_TIMESTAMP(3). If not it will keep throwing 'Invalid default value'.

I prefer, and use, your #1 option. I don't like #2 because to me View() implies you are returning an entire page. It should be a fully fleshed out and valid HTML page once the view engine is done with it. PartialView() was created to return arbitrary chunks of HTML.

I don't think it's a big deal to have a view that just calls a partial. It's still DRY, and allows you to use the logic of the partial in two scenarios.

Many people dislike fragmenting their action's call paths with Request.IsAjaxRequest(), and I can appreciate that. But IMO, if all you are doing is deciding whether to call View() or PartialView() then the branch is not a big deal and is easy to maintain (and test). If you find yourself using IsAjaxRequest() to determine large portions of how your action plays out, then making a separate AJAX action is probably better.

I believe this can be done just like this. This might need some tweaking but you can just select the max from the group.

These answers are overkill..

SELECT
  d.DocumentID,
  MAX(d.Status),
  MAX(d1.DateCreated)
FROM DocumentStatusLogs d, DocumentStatusLogs d1
USING(DocumentID)
GROUP BY d.DocumentID
ORDER BY DateCreated DESC

No need to get too complicated. If all you need is ² then use the unicode representation.

http://en.wikipedia.org/wiki/Unicode_subscripts_and_superscripts

(which is how I assume you got the ² to appear in your question. )

The answer to this question has changed over the years. The current answer is here at the top, followed by the various answers over the years in chronological order:

Current Answer

You can use fs.existsSync():

const fs = require("fs"); // Or `import fs from "fs";` with ESM
if (fs.existsSync(path)) {
    // Do something
}

It was deprecated for several years, but no longer is. From the docs:

Note that fs.exists() is deprecated, but fs.existsSync() is not. (The callback parameter to fs.exists() accepts parameters that are inconsistent with other Node.js callbacks. fs.existsSync() does not use a callback.)

You've specifically asked for a synchronous check, but if you can use an asynchronous check instead (usually best with I/O), use fs.promises.access if you're using async functions or fs.access (since exists is deprecated) if not:

In an async function:

try {
    await fs.promises.access("somefile");
    // The check succeeded
} catch (error) {
    // The check failed
}

Or with a callback:

fs.access("somefile", error => {
    if (!error) {
        // The check succeeded
    } else {
        // The check failed
    }
});

Historical Answers

Here are the historical answers in chronological order:

• Original answer from 2010
  (stat/statSync or lstat/lstatSync)
• Update September 2012
  (exists/existsSync)
• Update February 2015
  (Noting impending deprecation of exists/existsSync, so we're probably back to stat/statSync or lstat/lstatSync)
• Update December 2015
  (There's also fs.access(path, fs.F_OK, function(){}) / fs.accessSync(path, fs.F_OK), but note that if the file/directory doesn't exist, it's an error; docs for fs.stat recommend using fs.access if you need to check for existence without opening)
• Update December 2016
  fs.exists() is still deprecated but fs.existsSync() is no longer deprecated. So you can safely use it now.

Original answer from 2010:

You can use statSync or lstatSync (docs link), which give you an fs.Stats object. In general, if a synchronous version of a function is available, it will have the same name as the async version with Sync at the end. So statSync is the synchronous version of stat; lstatSync is the synchronous version of lstat, etc.

lstatSync tells you both whether something exists, and if so, whether it's a file or a directory (or in some file systems, a symbolic link, block device, character device, etc.), e.g. if you need to know if it exists and is a directory:

var fs = require('fs');
try {
    // Query the entry
    stats = fs.lstatSync('/the/path');

    // Is it a directory?
    if (stats.isDirectory()) {
        // Yes it is
    }
}
catch (e) {
    // ...
}

...and similarly, if it's a file, there's isFile; if it's a block device, there's isBlockDevice, etc., etc. Note the try/catch; it throws an error if the entry doesn't exist at all.

If you don't care what the entry is and only want to know whether it exists, you can use path.existsSync (or with latest, fs.existsSync) as noted by user618408:

var path = require('path');
if (path.existsSync("/the/path")) { // or fs.existsSync
    // ...
}

It doesn't require a try/catch but gives you no information about what the thing is, just that it's there. path.existsSync was deprecated long ago.

Side note: You've expressly asked how to check synchronously, so I've used the xyzSync versions of the functions above. But wherever possible, with I/O, it really is best to avoid synchronous calls. Calls into the I/O subsystem take significant time from a CPU's point of view. Note how easy it is to call lstat rather than lstatSync:

// Is it a directory?
lstat('/the/path', function(err, stats) {
    if (!err && stats.isDirectory()) {
        // Yes it is
    }
});

But if you need the synchronous version, it's there.

Update September 2012

The below answer from a couple of years ago is now a bit out of date. The current way is to use fs.existsSync to do a synchronous check for file/directory existence (or of course fs.exists for an asynchronous check), rather than the path versions below.

Example:

var fs = require('fs');

if (fs.existsSync(path)) {
    // Do something
}

// Or

fs.exists(path, function(exists) {
    if (exists) {
        // Do something
    }
});

Update February 2015

And here we are in 2015 and the Node docs now say that fs.existsSync (and fs.exists) "will be deprecated". (Because the Node folks think it's dumb to check whether something exists before opening it, which it is; but that's not the only reason for checking whether something exists!)

So we're probably back to the various stat methods... Until/unless this changes yet again, of course.

Update December 2015

Don't know how long it's been there, but there's also fs.access(path, fs.F_OK, ...) / fs.accessSync(path, fs.F_OK). And at least as of October 2016, the fs.stat documentation recommends using fs.access to do existence checks ("To check if a file exists without manipulating it afterwards, fs.access() is recommended."). But note that the access not being available is considered an error, so this would probably be best if you're expecting the file to be accessible:

var fs = require('fs');

try {
    fs.accessSync(path, fs.F_OK);
    // Do something
} catch (e) {
    // It isn't accessible
}

// Or

fs.access(path, fs.F_OK, function(err) {
    if (!err) {
        // Do something
    } else {
        // It isn't accessible
    }
});

Update December 2016

You can use fs.existsSync():

if (fs.existsSync(path)) {
    // Do something
}

It was deprecated for several years, but no longer is. From the docs:

Note that fs.exists() is deprecated, but fs.existsSync() is not. (The callback parameter to fs.exists() accepts parameters that are inconsistent with other Node.js callbacks. fs.existsSync() does not use a callback.)

The JavaScript style names are WebkitTransformOrigin and WebkitTransform

element.style.webkitTransform = "rotate(-2deg)";

Check the DOM extension reference for WebKit here.

As you're using SQL 2008 or later, I'd recommend checking out the GEOGRAPHY data type. SQL has built in support for geospatial queries.

e.g. you'd have a column in your table of type GEOGRAPHY which would be populated with a geospatial representation of the coordinates (check out the MSDN reference linked above for examples). This datatype then exposes methods allowing you to perform a whole host of geospatial queries (e.g. finding the distance between 2 points)

for me it was because in /etc/hosts file the hostname is not added

We can use summary on factor column:

summary(myDF$factorColumn)

Javascript arrays have a length property. Use it like this:

st.itemb.length

Add it in milliseconds:

var currentDate = new Date();
var twentyMinutesLater = new Date(currentDate.getTime() + (20 * 60 * 1000));

faster to read than non cluster as data is physically storted in index order we can create only one per table.(cluster index)

quicker for insert and update operation than a cluster index. we can create n number of non cluster index.

I ended up using Brads technique to create a scaleToFitWidth method in UIImage+Extensions if that's useful to anyone...

-(UIImage *)scaleToFitWidth:(CGFloat)width
{
    CGFloat ratio = width / self.size.width;
    CGFloat height = self.size.height * ratio;

    NSLog(@"W:%f H:%f",width,height);

    UIGraphicsBeginImageContext(CGSizeMake(width, height));
    [self drawInRect:CGRectMake(0.0f,0.0f,width,height)];
    UIImage *newImage = UIGraphicsGetImageFromCurrentImageContext();
    UIGraphicsEndImageContext();

    return newImage;
}

then wherever you like

#import "UIImage+Extensions.h"

UIImage *newImage = [image scaleToFitWidth:100.0f];

Also worth noting you could move this further down into a UIView+Extensions class if you want to render images from a UIView

You can set the same data in your java code as well.

myActivity.setRequestedOrientation(ActivityInfo.SCREEN_ORIENTATION_LANDSCAPE);

Other values on ActivityInfo will let you set it back to sensor driven or locked portrait. Personally, I like to set it to something in the Manifest as suggested in another answer to this question and then change it later using the above call in the Android SDK if there's a need.

The View::make function takes 3 arguments which according to the documentation are:

public View make(string $view, array $data = array(), array $mergeData = array())

In your case, the compact('selections') is a 4th argument. It doesn't pass to the view and laravel throws an exception.

On the other hand, you can use with() as many time as you like. Thus, this will work:

return View::make('gameworlds.mygame')

->with(compact('fixtures'))

->with(compact('teams'))

->with(compact('selections'));

Given an instance of the struct, you set the values.

    student thisStudent;
    Console.WriteLine("Please enter StudentId, StudentName, CourseName, Date-Of-Birth");
    thisStudent.s_id = int.Parse(Console.ReadLine());
    thisStudent.s_name = Console.ReadLine();
    thisStudent.c_name = Console.ReadLine();
    thisStudent.s_dob = Console.ReadLine();

Note this code is incredibly fragile, since we aren't checking the input from the user at all. And you aren't clear to the user that you expect each data point to be entered on a separate line.

You need to use val rather than value.

$("#fileinput").val();

You have encountered the ternary operator. It's purpose is that of a basic if-else statement. The following pieces of code do the same thing.

Ternary:

$something = isset($_GET['something']) ? $_GET['something'] : "failed";

If-else:

if (isset($_GET['something'])) {
    $something = $_GET['something'];
} else {
    $something = "failed";
}

This is not a compiler error: the error is coming from the linker. After compilation, the linker will merge the object files resulting from the compilation of each of your translation units (.cpp files).

The linker finds out that you have the same symbol defined multiple times in different translation units, and complains about it (it is a violation of the One Definition Rule).

The reason is most certainly that main.cpp includes client.cpp, and both these files are individually processed by the compiler to produce two separate object files. Therefore, all the symbols defined in the client.cpp translation unit will be defined also in the main.cpp translation unit. This is one of the reasons why you do not usually #include .cpp files.

Put the definition of your class in a separate client.hpp file which does not contain also the definitions of the member functions of that class; then, let client.cpp and main.cpp include that file (I mean #include). Finally, leave in client.cpp the definitions of your class's member functions.

client.h

#ifndef SOCKET_CLIENT_CLASS
#define SOCKET_CLIENT_CLASS
#ifndef BOOST_ASIO_HPP
#include <boost/asio.hpp>
#endif

class SocketClient // Or whatever the name is...
{

// ...

    bool read(int, char*); // Or whatever the name is...

//  ...
};

#endif

client.cpp

#include "Client.h"

// ...

bool SocketClient::read(int, char*)
{
    // Implementation  goes here...
}

// ... (add the definitions for all other member functions)

main.h

#include <iostream>
#include <string>
#include <sstream>
#include <boost/asio.hpp>
#include <boost/thread/thread.hpp>
#include "client.h"
//              ^^ Notice this!

main.cpp

#include "main.h"

This doesn't use TEMP Tables, but real tables instead. If the problem is just about temp tables and not about table creation or dropping tables, this will work:

SELECT DISTINCT * INTO TableA_Verify FROM TableA;

DROP TABLE TableA;

RENAME TABLE TableA_Verify TO TableA;

Another way you can do this:

System.Diagnostics.Process.GetCurrentProcess().Kill();

This will force kill your application. It always works, even in a multi-threaded application.

Note: Just be careful not to lose unsaved data in another thread.

the _T convention is used to indicate the program should use the character set defined for the application (Unicode, ASCII, MBCS, etc.). You can surround your strings with _T( ) to have them stored in the correct format.

 cout << _T( "There are " ) << argc << _T( " arguments:" ) << endl;

PreOrderTraversal is same as DFS in binary tree. You can do the same recursion 
taking care of Stack as below.

    public void IterativePreOrder(Tree root)
            {
                if (root == null)
                    return;
                Stack s<Tree> = new Stack<Tree>();
                s.Push(root);
                while (s.Count != 0)
                {
                    Tree b = s.Pop();
                    Console.Write(b.Data + " ");
                    if (b.Right != null)
                        s.Push(b.Right);
                    if (b.Left != null)
                        s.Push(b.Left);

                }
            }

The general logic is, push a node(starting from root) into the Stack, Pop() it and Print() value. Then if it has children( left and right) push them into the stack - push Right first so that you will visit Left child first(after visiting node itself). When stack is empty() you will have visited all nodes in Pre-Order.

Add a vertical align to the CSS content #column-content strong too:

#column-content strong {
    ...
    vertical-align: middle;
}

Also see your updated example.

=== UPDATE ===

With a span around the other text and another vertical align:

HTML:

... <span>yet another text content that should be centered vertically</span> ...

CSS:

#column-content span {
    vertical-align: middle;
}

Also see the next example.

If someone want to set it only for the current session then use the following command

set session sql_mode="NO_BACKSLASH_ESCAPES,STRICT_TRANS_TABLE,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION

Expansion for multi-dimension array total length,

Generally for your case, since the shape of the 2D array is "squared".

int length = nir.length * nir[0].length;

However, for 2D array, each row may not have the exact same number of elements. Therefore we need to traverse through each row, add number of elements up.

int length = 0;
for ( int lvl = 0; lvl < _levels.length; lvl++ )
{
    length += _levels[ lvl ].length;
}

If N-D array, which means we need N-1 for loop to get each row's size.

As described by Gideon, this is a known issue.
For use window.onunload = function() { debugger; } instead.
But you can add a breakpoint in Source tab, then can solve your problem. like this:

Chain both class selectors (without a space in between):

.foo.bar {
    /* Styles for element(s) with foo AND bar classes */
}

If you still have to deal with ancient browsers like IE6, be aware that it doesn't read chained class selectors correctly: it'll only read the last class selector (.bar in this case) instead, regardless of what other classes you list.

To illustrate how other browsers and IE6 interpret this, consider this CSS:

* {
    color: black;
}

.foo.bar {
    color: red;
}

Output on supported browsers is:

<div class="foo">Hello Foo</div>       <!-- Not selected, black text [1] -->
<div class="foo bar">Hello World</div> <!-- Selected, red text [2] -->
<div class="bar">Hello Bar</div>       <!-- Not selected, black text [3] -->

Output on IE6 is:

<div class="foo">Hello Foo</div>       <!-- Not selected, black text [1] -->
<div class="foo bar">Hello World</div> <!-- Selected, red text [2] -->
<div class="bar">Hello Bar</div>       <!-- Selected, red text [2] -->

Footnotes:

• Supported browsers:
  1. Not selected as this element only has class foo.
  2. Selected as this element has both classes foo and bar.
  3. Not selected as this element only has class bar.
     
     
• IE6:
  1. Not selected as this element doesn't have class bar.
  2. Selected as this element has class bar, regardless of any other classes listed.

You made the error, for the second call, to set the size of source to the size of the target.
Anyway i bet that you want the same aspect ratio for the scaled image, so you need to compute it :

var hRatio = canvas.width / img.width    ;
var vRatio = canvas.height / img.height  ;
var ratio  = Math.min ( hRatio, vRatio );
ctx.drawImage(img, 0,0, img.width, img.height, 0,0,img.width*ratio, img.height*ratio);

i also suppose you want to center the image, so the code would be :

function drawImageScaled(img, ctx) {
   var canvas = ctx.canvas ;
   var hRatio = canvas.width  / img.width    ;
   var vRatio =  canvas.height / img.height  ;
   var ratio  = Math.min ( hRatio, vRatio );
   var centerShift_x = ( canvas.width - img.width*ratio ) / 2;
   var centerShift_y = ( canvas.height - img.height*ratio ) / 2;  
   ctx.clearRect(0,0,canvas.width, canvas.height);
   ctx.drawImage(img, 0,0, img.width, img.height,
                      centerShift_x,centerShift_y,img.width*ratio, img.height*ratio);  
}

you can see it in a jsbin here : http://jsbin.com/funewofu/1/edit?js,output

I have been searching far and wide in the internet.

I'm using Python 3.6 and MacOS. I have uninstalled and installed with pip3 install bs4 but that didn't work. It seems like python is not able to detect or search the bs4 module.

This is what worked: python3 -m pip install bs4

The -m option allows you to add a module name.

https://docs.python.org/3/using/cmdline.html

It could be due to below reasons: -

1. Either you dont have INTERNET permission in manifest file. If so then please use this statement <uses-permission android:name="android.permission.INTERNET" />

2. Or you are connected to a network but your internet connection is not working. Like you are connected to a Wi-Fi but it doesnt have internet connection or Mobile data on your phone is ON but you dont have data connectivity on your phone.

Point# 2 is interesting and its not assumption, I have tested the same at my end.

Hope this will help you

Summved

Have you tried: getElementbyId('ID_OF_ID').innerHTML?

split returns an Iterator, which you can convert into a Vec using collect: split_line.collect::<Vec<_>>(). Going through an iterator instead of returning a Vec directly has several advantages:

• split is lazy. This means that it won't really split the line until you need it. That way it won't waste time splitting the whole string if you only need the first few values: split_line.take(2).collect::<Vec<_>>(), or even if you need only the first value that can be converted to an integer: split_line.filter_map(|x| x.parse::<i32>().ok()).next(). This last example won't waste time attempting to process the "23.0" but will stop processing immediately once it finds the "1".
• split makes no assumption on the way you want to store the result. You can use a Vec, but you can also use anything that implements FromIterator<&str>, for example a LinkedList or a VecDeque, or any custom type that implements FromIterator<&str>.

var $myForm = $('#myForm ');
if (!$myForm[0].checkValidity()) {
  $('<input type="submit">').hide().appendTo($myForm).click().remove();
}

In one line, but first import IO

import pandas as pd
import io   

TESTDATA="""col1;col2;col3
1;4.4;99
2;4.5;200
3;4.7;65
4;3.2;140
"""

df = pd.read_csv(  io.StringIO(TESTDATA)  , sep=";")
print ( df )

It sounds like you're not asking for a general-purpose memoization decorator (i.e., you're not interested in the general case where you want to cache return values for different argument values). That is, you'd like to have this:

x = obj.name  # expensive
y = obj.name  # cheap

while a general-purpose memoization decorator would give you this:

x = obj.name()  # expensive
y = obj.name()  # cheap

I submit that the method-call syntax is better style, because it suggests the possibility of expensive computation while the property syntax suggests a quick lookup.

[Update: The class-based memoization decorator I had linked to and quoted here previously doesn't work for methods. I've replaced it with a decorator function.] If you're willing to use a general-purpose memoization decorator, here's a simple one:

def memoize(function):
  memo = {}
  def wrapper(*args):
    if args in memo:
      return memo[args]
    else:
      rv = function(*args)
      memo[args] = rv
      return rv
  return wrapper

Example usage:

@memoize
def fibonacci(n):
  if n < 2: return n
  return fibonacci(n - 1) + fibonacci(n - 2)

Another memoization decorator with a limit on the cache size can be found here.

To add on Tzot's and gns answers, here's an alternative way of copying files and folders recursively. (Python 3.X)

import os, shutil

root_src_dir = r'C:\MyMusic'    #Path/Location of the source directory
root_dst_dir = 'D:MusicBackUp'  #Path to the destination folder

for src_dir, dirs, files in os.walk(root_src_dir):
    dst_dir = src_dir.replace(root_src_dir, root_dst_dir, 1)
    if not os.path.exists(dst_dir):
        os.makedirs(dst_dir)
    for file_ in files:
        src_file = os.path.join(src_dir, file_)
        dst_file = os.path.join(dst_dir, file_)
        if os.path.exists(dst_file):
            os.remove(dst_file)
        shutil.copy(src_file, dst_dir)

Should it be your first time and you have no idea how to copy files and folders recursively, I hope this helps.

If you do not need to retrieve all the row and want to avoid to make a double query, you can probably try something like that:

using (var sqlCon = new SqlConnection("Server=127.0.0.1;Database=MyDb;User Id=Me;Password=glop;"))
      {
        sqlCon.Open();

        var com = sqlCon.CreateCommand();
        com.CommandText = "select * from BigTable";
        using (var reader = com.ExecuteReader())
        {
            //here you retrieve what you need
        }

        com.CommandText = "select @@ROWCOUNT";
        var totalRow = com.ExecuteScalar();

        sqlCon.Close();
      }

You may have to add a transaction not sure if reusing the same command will automatically add a transaction on it...

This PowerShell Script Downloads and Installs MongoDB as Windows Service:

Set-ExecutionPolicy RemoteSigned

$mongoDbPath = "C:\MongoDB" 
$mongoDbConfigPath = "$mongoDbPath\mongod.cfg"
$url = "http://downloads.mongodb.org/win32/mongodb-win32-x86_64-2008plus-2.4.9.zip" 
$zipFile = "$mongoDbPath\mongo.zip" 
$unzippedFolderContent ="$mongoDbPath\mongodb-win32-x86_64-2008plus-2.4.9"

if ((Test-Path -path $mongoDbPath) -eq $True) 
{ 
  write-host "Seems you already installed MongoDB"
    exit 
}

md $mongoDbPath 
md "$mongoDbPath\log" 
md "$mongoDbPath\data" 
md "$mongoDbPath\data\db"

[System.IO.File]::AppendAllText("$mongoDbConfigPath", "dbpath=C:\MongoDB\data\db`r`n")
[System.IO.File]::AppendAllText("$mongoDbConfigPath", "logpath=C:\MongoDB\log\mongo.log`r`n")
[System.IO.File]::AppendAllText("$mongoDbConfigPath", "smallfiles=true`r`n")
[System.IO.File]::AppendAllText("$mongoDbConfigPath", "noprealloc=true`r`n")

$webClient = New-Object System.Net.WebClient 
$webClient.DownloadFile($url,$zipFile)

$shellApp = New-Object -com shell.application 
$destination = $shellApp.namespace($mongoDbPath) 
$destination.Copyhere($shellApp.namespace($zipFile).items())

Copy-Item "$unzippedFolderContent\*" $mongoDbPath -recurse

Remove-Item $unzippedFolderContent -recurse -force 
Remove-Item $zipFile -recurse -force

& $mongoDBPath\bin\mongod.exe --config $mongoDbConfigPath --install

& net start mongodb

Your stored procedure is designed to accept a single parameter, Arg1List. You can't pass 4 parameters to a procedure that only accepts one.

To make it work, the code that calls your procedure will need to concatenate your parameters into a single string of no more than 3000 characters and pass it in as a single parameter.

Example with float:

public static float getMaxFloat(float[] data) {

    float[] copy = Arrays.copyOf(data, data.length);
    Arrays.sort(copy);
    return copy[data.length - 1];
}

public static float getMinFloat(float[] data) {

    float[] copy = Arrays.copyOf(data, data.length);
    Arrays.sort(copy);
    return copy[0];
}

This examples shows calling a method

1. Defined in Child widget from Parent widget.
2. Defined in Parent widget from Child widget.

class ParentPage extends StatefulWidget {
  @override
  _ParentPageState createState() => _ParentPageState();
}

class _ParentPageState extends State<ParentPage> {
  final GlobalKey<ChildPageState> _key = GlobalKey();

  @override
  Widget build(BuildContext context) {
    return Scaffold(
      appBar: AppBar(title: Text("Parent")),
      body: Center(
        child: Column(
          children: <Widget>[
            Expanded(
              child: Container(
                color: Colors.grey,
                width: double.infinity,
                alignment: Alignment.center,
                child: RaisedButton(
                  child: Text("Call method in child"),
                  onPressed: () => _key.currentState.methodInChild(), // calls method in child
                ),
              ),
            ),
            Text("Above = Parent\nBelow = Child"),
            Expanded(
              child: ChildPage(
                key: _key,
                function: methodInParent,
              ),
            ),
          ],
        ),
      ),
    );
  }

  methodInParent() => Fluttertoast.showToast(msg: "Method called in parent", gravity: ToastGravity.CENTER);
}

class ChildPage extends StatefulWidget {
  final Function function;

  ChildPage({Key key, this.function}) : super(key: key);

  @override
  ChildPageState createState() => ChildPageState();
}

class ChildPageState extends State<ChildPage> {
  @override
  Widget build(BuildContext context) {
    return Container(
      color: Colors.teal,
      width: double.infinity,
      alignment: Alignment.center,
      child: RaisedButton(
        child: Text("Call method in parent"),
        onPressed: () => widget.function(), // calls method in parent
      ),
    );
  }

  methodInChild() => Fluttertoast.showToast(msg: "Method called in child");
}

To change the size of (almost) all text elements, in one place, and synchronously, rel() is quite efficient:
g+theme(text = element_text(size=rel(3.5))

You might want to tweak the number a bit, to get the optimum result. It sets both the horizontal and vertical axis labels and titles, and other text elements, on the same scale. One exception is faceted grids' titles which must be manually set to the same value, for example if both x and y facets are used in a graph:
theme(text = element_text(size=rel(3.5)), strip.text.x = element_text(size=rel(3.5)), strip.text.y = element_text(size=rel(3.5)))

When a program is not showing or displaying an output on the screen, using system("pause"); is the solution to it on a Windows profile.

you can use && and write all conditions in to the same where clause, or you can .Where().Where().Where()... and so on.

Use RGBA like this: background-color: rgba(255, 0, 0, .5)

Here is an optimized version of npinti's answer:

import javax.swing.text.AttributeSet;
import javax.swing.text.BadLocationException;
import javax.swing.text.JTextComponent;
import javax.swing.text.PlainDocument;
import java.awt.*;

public class TextComponentLimit extends PlainDocument
{
    private int charactersLimit;

    private TextComponentLimit(int charactersLimit)
    {
        this.charactersLimit = charactersLimit;
    }

    @Override
    public void insertString(int offset, String input, AttributeSet attributeSet) throws BadLocationException
    {
        if (isAllowed(input))
        {
            super.insertString(offset, input, attributeSet);
        } else
        {
            Toolkit.getDefaultToolkit().beep();
        }
    }

    private boolean isAllowed(String string)
    {
        return (getLength() + string.length()) <= charactersLimit;
    }

    public static void addTo(JTextComponent textComponent, int charactersLimit)
    {
        TextComponentLimit textFieldLimit = new TextComponentLimit(charactersLimit);
        textComponent.setDocument(textFieldLimit);
    }
}

To add a limit to your JTextComponent, simply write the following line of code:

JTextFieldLimit.addTo(myTextField, myMaximumLength);

Here's possibly the simplest way:

IO.copy_stream(URI.open("https://i.pinimg.com/originals/24/17/d6/2417d6b3f3dc236b0b5b80fb00b3a791.png"), 'destination.png')

The filesystem size can be different from the patition size. To repair you need to do this

df -h

see what is the name of the partition say /dev/sda3

resize2fs /dev/sda3

You can use us jquery function getJson :

$(function(){
    $.getJSON('/api/rest/abc', function(data) {
        console.log(data);
    });
});

It depends on where you are looking for the information from.

If you are looking for the information from the console you can use the jps command. The command gives output similar to the Unix ps command and comes with the JDK since I believe 1.5

If you are looking from the process the RuntimeMXBean (as said by Wouter Coekaerts) is probably your best choice. The output from getName() on Windows using Sun JDK 1.6 u7 is in the form [PROCESS_ID]@[MACHINE_NAME]. You could however try to execute jps and parse the result from that:

String jps = [JDK HOME] + "\\bin\\jps.exe";
Process p = Runtime.getRuntime().exec(jps);

If run with no options the output should be the process id followed by the name.

I used preg_match to do it.

In my case, I had a string containing exactly one <img> tag (and no other markup) that I got from Wordpress and I was trying to get the src attribute so I could run it through timthumb.

// get the featured image
$image = get_the_post_thumbnail($photos[$i]->ID);

// get the src for that image
$pattern = '/src="([^"]*)"/';
preg_match($pattern, $image, $matches);
$src = $matches[1];
unset($matches);

In the pattern to grab the title or the alt, you could simply use $pattern = '/title="([^"]*)"/'; to grab the title or $pattern = '/title="([^"]*)"/'; to grab the alt. Sadly, my regex isn't good enough to grab all three (alt/title/src) with one pass though.

Also You can use

$value = $("#txt").val();

if($value == "")
{
    //Your Code Here
}
else
{
   //Your code
}

Try it. It work.

You can return json in PHP this way:

header('Content-Type: application/json');
echo json_encode(array('foo' => 'bar'));
exit;

$response is instance of PSR-7 ResponseInterface. For more details see https://www.php-fig.org/psr/psr-7/#3-interfaces

getBody() returns StreamInterface:

/**
 * Gets the body of the message.
 *
 * @return StreamInterface Returns the body as a stream.
 */
public function getBody();

StreamInterface implements __toString() which does

Reads all data from the stream into a string, from the beginning to end.

Therefore, to read body as string, you have to cast it to string:

$stringBody = (string) $response->getBody()

Gotchas

1. json_decode($response->getBody() is not the best solution as it magically casts stream into string for you. json_decode() requires string as 1st argument.
2. Don't use $response->getBody()->getContents() unless you know what you're doing. If you read documentation for getContents(), it says: Returns the remaining contents in a string. Therefore, calling getContents() reads the rest of the stream and calling it again returns nothing because stream is already at the end. You'd have to rewind the stream between those calls.

You can use Apache Commons Configuration library. The best part of this is, it won't even mess up the properties file and keeps it intact (even comments).

Javadoc

PropertiesConfiguration conf = new PropertiesConfiguration("propFile.properties");
conf.setProperty("key", "value");
conf.save();    

You can amend your !DOCTYPE declaration (i.e. DTD) to allow it, so that the [XML] document will still be valid:

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"
[
  <!ATTLIST tag myAttri CDATA #IMPLIED>
]>

#IMPLIED means it is an optional attribute, or you could use #REQUIRED, etc.

More information is in DTD - Attributes.

Use this echo statement

 echo -e "Hai\nHello\nTesting\n"

The output is

Hai
Hello
Testing

Like @Sunkas wrote, performSelector:withObject:afterDelay: is the pendant to the dispatch_after just that it is shorter and you have the normal objective-c syntax. If you need to pass arguments to the block you want to delay, you can just pass them through the parameter withObject and you will receive it in the selector you call:

[self performSelector:@selector(testStringMethod:) 
           withObject:@"Test Test" 
           afterDelay:0.5];

- (void)testStringMethod:(NSString *)string{
    NSLog(@"string  >>> %@", string);
}

If you still want to choose yourself if you execute it on the main thread or on the current thread, there are specific methods which allow you to specify this. Apples Documentation tells this:

If you want the message to be dequeued when the run loop is in a mode other than the default mode, use the performSelector:withObject:afterDelay:inModes: method instead. If you are not sure whether the current thread is the main thread, you can use the performSelectorOnMainThread:withObject:waitUntilDone: or performSelectorOnMainThread:withObject:waitUntilDone:modes: method to guarantee that your selector executes on the main thread. To cancel a queued message, use the cancelPreviousPerformRequestsWithTarget: or cancelPreviousPerformRequestsWithTarget:selector:object: method.

Some RFID chips are read-write, the majority are read-only. You can find out if your chip is read-only by checking the datasheet.

The basic way is:

printf ("Here are the first 8 chars: %.8s\n", "A string that is more than 8 chars");

The other, often more useful, way is:

printf ("Here are the first %d chars: %.*s\n", 8, 8, "A string that is more than 8 chars");

Here, you specify the length as an int argument to printf(), which treats the '*' in the format as a request to get the length from an argument.

You can also use the notation:

printf ("Here are the first 8 chars: %*.*s\n",
        8, 8, "A string that is more than 8 chars");

This is also analogous to the "%8.8s" notation, but again allows you to specify the minimum and maximum lengths at runtime - more realistically in a scenario like:

printf("Data: %*.*s Other info: %d\n", minlen, maxlen, string, info);

The POSIX specification for printf() defines these mechanisms.

If you declare a DateTime, then the default value is DateTime.MinValue, and hence you have to check it like this:

DateTime dat = new DateTime();

 if (dat==DateTime.MinValue)
 {
     //unassigned
 }

If the DateTime is nullable, well that's a different story:

 DateTime? dat = null;

 if (!dat.HasValue)
 {
     //unassigned
 }

I also had this problem. it was weird that it worked on my lollipop emulator, but not on my actual kitkat device.

Android Studio will now force you to write the permission upper case, and that's the problem.

Add

<uses-permission android:name="android.permission.INTERNET" />
<uses-permission android:name="android.permission.ACCESS_NETWORK_STATE"/>

Above the application tab and it will work.

Word Break will mimic some of the intent

    input[type=text] {
        word-wrap: break-word;
        word-break: break-all;
        height: 80px;
    }

<input type="text" value="The quick brown fox jumped over the lazy dog" />

As a workaround, this solution lost its effectiveness on some browsers. Please check the demo: http://cssdesk.com/dbCSQ

Use the ListView.ItemContainerStyle property to give your ListViewItems an EventSetter that will handle the PreviewMouseLeftButtonDown event. Then, in the handler, check to see if the item that was clicked is selected.

XAML:

<ListView ItemsSource={Binding MyItems}>
    <ListView.View>
        <GridView>
            <!-- declare a GridViewColumn for each property -->
        </GridView>
    </ListView.View>
    <ListView.ItemContainerStyle>
        <Style TargetType="ListViewItem">
            <EventSetter Event="PreviewMouseLeftButtonDown" Handler="ListViewItem_PreviewMouseLeftButtonDown" />
        </Style>
    </ListView.ItemContainerStyle>
</ListView>

Code-behind:

private void ListViewItem_PreviewMouseLeftButtonDown(object sender, MouseButtonEventArgs e)
{
    var item = sender as ListViewItem;
    if (item != null && item.IsSelected)
    {
        //Do your stuff
    }
}

had the same problem and figured out that my head closing tag was in the wrong place

Use this Command:

curl -s http://php-osx.liip.ch/install.sh | bash -s 7.0

I researched a bit into SVG webfonts and font creation, in my eyes if you want to "add" fonts to font-awesome already existing font you need to do the following:

go to inkscape and create a glyph, save it as SVG so you could read the code, make sure to assign it a unicode character which is not currently used so it will not conflict with any of the existing glyphs in the font. this could be hard so i think a better simpler approad would be replacing an existing glyph with your own (just choose one you dont use, copy the first part:

Save the svg then convert it to web-font using any online converter so your webfont would work in all browsers.

once this is done, you should have either an SVG with one of the glyphs replaced in which case youre done. if not you need to create the CSS for your new glyph, in this case try and reuse FAs existing CSS, and only add

>##CSS##
>.FA.NEW-GLYPH:after {
>content:'WHATEVER AVAILABLE UNICODE CHARACTER YOU FOUND'
>(other conditions should be copied from other fonts)
>}

Lets assume you have data in D and E cells.. Here is an easiest ratio displaying fn by my frnd 'Karthik'

=ROUND(D7/E7, 2) &":" & (E7/E7)

First off, it is perfectly feasible to use R successfully for years and not need to know the answer to this question. R handles the differences between the (usual) numerics and integers for you in the background.

> is.numeric(1)

[1] TRUE

> is.integer(1)

[1] FALSE

> is.numeric(1L)

[1] TRUE

> is.integer(1L)

[1] TRUE

(Putting capital 'L' after an integer forces it to be stored as an integer.)

As you can see "integer" is a subset of "numeric".

> .Machine$integer.max

[1] 2147483647

> .Machine$double.xmax

[1] 1.797693e+308

Integers only go to a little more than 2 billion, while the other numerics can be much bigger. They can be bigger because they are stored as double precision floating point numbers. This means that the number is stored in two pieces: the exponent (like 308 above, except in base 2 rather than base 10), and the "significand" (like 1.797693 above).

Note that 'is.integer' is not a test of whether you have a whole number, but a test of how the data are stored.

One thing to watch out for is that the colon operator, :, will return integers if the start and end points are whole numbers. For example, 1:5 creates an integer vector of numbers from 1 to 5. You don't need to append the letter L.

> class(1:5)
[1] "integer"

Reference: https://www.quora.com/What-is-the-difference-between-numeric-and-integer-in-R

My problem was caused by Fiddler. When Fiddler crashes it occasionally messes with your proxy settings. Simply launching Fiddler seemed to fix everything (perhaps it repairs itself somehow).

You can use Record for this:

https://www.typescriptlang.org/docs/handbook/utility-types.html#recordkt

Example (A mapping between AppointmentStatus enum and some meta data):

  const iconMapping: Record<AppointmentStatus, Icon> = {
    [AppointmentStatus.Failed]: { Name: 'calendar times', Color: 'red' },
    [AppointmentStatus.Canceled]: { Name: 'calendar times outline', Color: 'red' },
    [AppointmentStatus.Confirmed]: { Name: 'calendar check outline', Color: 'green' },
    [AppointmentStatus.Requested]: { Name: 'calendar alternate outline', Color: 'orange' },
    [AppointmentStatus.None]: { Name: 'calendar outline', Color: 'blue' }
  }

Now with interface as value:

interface Icon { Name: string Color: string }

Usage:

const icon: SemanticIcon = iconMapping[appointment.Status]

If I am getting you correctly, when you say that clicking does nothing, do you mean that it does not point to your URL?

In the anchor tag <a href>it looks like you did not pass your file path to the href attribute. So, replace the # with your actual path for the file that you want to link.

<li><a href="#">Action</a></li>
<li><a href="action link here">Another action</a></li>
<li><a href="something else link here">Something else here</a></li>
<li class="divider"></li>
<li><a href="seperated link here">Separated link</a></li>

I hope this helps with your issue.

In your binding configuration, there are four timeout values you can tweak:

<bindings>
  <basicHttpBinding>
    <binding name="IncreasedTimeout"
             sendTimeout="00:25:00">
    </binding>
  </basicHttpBinding>

The most important is the sendTimeout, which says how long the client will wait for a response from your WCF service. You can specify hours:minutes:seconds in your settings - in my sample, I set the timeout to 25 minutes.

The openTimeout as the name implies is the amount of time you're willing to wait when you open the connection to your WCF service. Similarly, the closeTimeout is the amount of time when you close the connection (dispose the client proxy) that you'll wait before an exception is thrown.

The receiveTimeout is a bit like a mirror for the sendTimeout - while the send timeout is the amount of time you'll wait for a response from the server, the receiveTimeout is the amount of time you'll give you client to receive and process the response from the server.

In case you're send back and forth "normal" messages, both can be pretty short - especially the receiveTimeout, since receiving a SOAP message, decrypting, checking and deserializing it should take almost no time. The story is different with streaming - in that case, you might need more time on the client to actually complete the "download" of the stream you get back from the server.

There's also openTimeout, receiveTimeout, and closeTimeout. The MSDN docs on binding gives you more information on what these are for.

To get a serious grip on all the intricasies of WCF, I would strongly recommend you purchase the "Learning WCF" book by Michele Leroux Bustamante:

Learning WCF http://ecx.images-amazon.com/images/I/51GNuqUJq%2BL._BO2,204,203,200_PIsitb-sticker-arrow-click,TopRight,35,-76_AA240_SH20_OU01_.jpg

and you also spend some time watching her 15-part "WCF Top to Bottom" screencast series - highly recommended!

For more advanced topics I recommend that you check out Juwal Lowy's Programming WCF Services book.

Programming WCF http://ecx.images-amazon.com/images/I/41odWcLoGAL._BO2,204,203,200_PIsitb-sticker-arrow-click,TopRight,35,-76_AA240_SH20_OU01_.jpg

Use the central limit theorem wikipedia entry mathworld entry to your advantage.

Generate n of the uniformly distributed numbers, sum them, subtract n*0.5 and you have the output of an approximately normal distribution with mean equal to 0 and variance equal to (1/12) * (1/sqrt(N)) (see wikipedia on uniform distributions for that last one)

n=10 gives you something half decent fast. If you want something more than half decent go for tylers solution (as noted in the wikipedia entry on normal distributions)

You can try the QueryPerformanceCounter native method. See http://www.pinvoke.net/default.aspx/kernel32/QueryPerformanceCounter.html for more information. This is what the Stopwatch class uses.

See How to get timestamp of tick precision in .NET / C#? for more information.

Stopwatch.GetTimestamp() gives access to this method:

public static long GetTimestamp() {
     if(IsHighResolution) {
         long timestamp = 0;
         SafeNativeMethods.QueryPerformanceCounter(out timestamp);
         return timestamp;
     }
     else {
         return DateTime.UtcNow.Ticks;
     }
 }

Since this is the top result on Google:

If your connection works initially, but you begin seeing this error after many successful connections, it may be this issue.

In summary: if you open and close a connection, Windows reserves the TCP port for future use for some stupid reason. After doing this many times, it runs out of available ports.

The article gives a registry hack to fix the issue...

Here are my registry settings on XP/2003:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\MaxUserPort 0xFFFF (DWORD)
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\MaxUserPort\TcpTimedWaitDelay 60 (DWORD)

You need to create them. By default they don't exists.

On Vista/2008 you can use netsh to change it to something like:

netsh int ipv4 set dynamicport tcp start=10000 num=50000

...but the real solution is to use connection pooling, so that "opening" a connection really reuses an existing connection. Most frameworks do this automatically, but in my case the application was handling connections manually for some reason.

The below code worked for me:

.vertical-align {
    display: flex;
    align-items: center;
}

In Mercurial you use hg log --keyword to search for keywords in the commit messages and hg log --user to search for a particular user. See hg help log for other ways to limit the log.

OK the main difference between class methods and static methods is:

• class method has its own identity, that's why they have to be called from within an INSTANCE.
• on the other hand static method can be shared between multiple instances so that it must be called from within THE CLASS

Here is my working solution :

// --------------------------
// SOAP Message creation
// --------------------------
SOAPMessage sm = MessageFactory.newInstance().createMessage();
sm.setProperty(SOAPMessage.WRITE_XML_DECLARATION, "true");
sm.setProperty(SOAPMessage.CHARACTER_SET_ENCODING, "UTF-8");

SOAPPart sp = sm.getSOAPPart();
SOAPEnvelope se = sp.getEnvelope();
se.setEncodingStyle("http://schemas.xmlsoap.org/soap/encoding/");
se.setAttribute("xmlns:SOAP-ENC", "http://schemas.xmlsoap.org/soap/encoding/");
se.setAttribute("xmlns:xsd", "http://www.w3.org/2001/XMLSchema");
se.setAttribute("xmlns:xsi", "http://www.w3.org/2001/XMLSchema-instance");

SOAPBody sb = sm.getSOAPBody();
// 
// Add all input fields here ...
// 

SOAPConnection connection = SOAPConnectionFactory.newInstance().createConnection();
// -----------------------------------
// URL creation with TimeOut connexion
// -----------------------------------
URL endpoint = new URL(null,
                      "http://myDomain/myWebService.php",
                    new URLStreamHandler() { // Anonymous (inline) class
                    @Override
                    protected URLConnection openConnection(URL url) throws IOException {
                    URL clone_url = new URL(url.toString());
                    HttpURLConnection clone_urlconnection = (HttpURLConnection) clone_url.openConnection();
                    // TimeOut settings
                    clone_urlconnection.setConnectTimeout(10000);
                    clone_urlconnection.setReadTimeout(10000);
                    return(clone_urlconnection);
                    }
                });


try {
    // -----------------
    // Send SOAP message
    // -----------------
    SOAPMessage retour = connection.call(sm, endpoint);
}
catch(Exception e) {
    if ((e instanceof com.sun.xml.internal.messaging.saaj.SOAPExceptionImpl) && (e.getCause()!=null) && (e.getCause().getCause()!=null) && (e.getCause().getCause().getCause()!=null)) {
        System.err.println("[" + e + "] Error sending SOAP message. Initial error cause = " + e.getCause().getCause().getCause());
    }
    else {
        System.err.println("[" + e + "] Error sending SOAP message.");

    }
}

I think I found a way to do this with the Compile Include=".\Code***.cs" What I wanted is to include code recursively under my Code folder.

Here is the project file sample.

<Project xmlns="http://schemas.microsoft.com/developer/msbuild/2003" ToolsVersion="15.0" DefaultTargets="BuildTarget">
    <PropertyGroup>
        <OutputType>Library</OutputType>
    </PropertyGroup>
    <PropertyGroup>
        <StartupObject />
    </PropertyGroup>
    <PropertyGroup>
        <RootNamespace>Autogen</RootNamespace>
    </PropertyGroup>
    <ItemGroup>
        <Compile Remove="@(Compile)" />
        <Compile Include=".\Code\**\*.cs" />
    </ItemGroup>
    <Target Name="BuildTarget">
        <Message Text="Build selected" Importance="high"/>
    </Target>
</Project>

In case if you would like to get the largest K element using max heap, you can do the following trick:

nums= [3,2,1,5,6,4]
k = 2  #k being the kth largest element you want to get
heapq.heapify(nums) 
temp = heapq.nlargest(k, nums)
return temp[-1]

Toolbar toolbar = findViewById(R.id.myToolbar);
    toolbar.setTitle("");

Your data.json should look like this:

{
 "maps":[
         {"id":"blabla","iscategorical":"0"},
         {"id":"blabla","iscategorical":"0"}
        ],
"masks":
         {"id":"valore"},
"om_points":"value",
"parameters":
         {"id":"valore"}
}

Your code should be:

import json
from pprint import pprint

with open('data.json') as data_file:    
    data = json.load(data_file)
pprint(data)

Note that this only works in Python 2.6 and up, as it depends upon the with-statement. In Python 2.5 use from __future__ import with_statement, in Python <= 2.4, see Justin Peel's answer, which this answer is based upon.

You can now also access single values like this:

data["maps"][0]["id"]  # will return 'blabla'
data["masks"]["id"]    # will return 'valore'
data["om_points"]      # will return 'value'

I'm going to test adding the no-store tag to our site to see if this makes a difference to browser caching (Chrome has sometimes been caching the pages). I also found this article very useful on documentation on how and why caching works and will look at ETag's next if the no-store is not reliable:

http://www.mnot.net/cache_docs/

http://en.wikipedia.org/wiki/HTTP_ETag

I know people say you shouldn't use regular expressions to parse HTML, but in this case I find it perfectly fine.

$string = '<img border="0" src="/images/image.jpg" alt="Image" width="100" height="100" />';
preg_match('/<img(.*)src(.*)=(.*)"(.*)"/U', $string, $result);
$foo = array_pop($result);

Difference between Paint() and Repaint() method

Paint():

This method holds instructions to paint this component. Actually, in Swing, you should change paintComponent() instead of paint(), as paint calls paintBorder(), paintComponent() and paintChildren(). You shouldn't call this method directly, you should call repaint() instead.

Repaint():

This method can't be overridden. It controls the update() -> paint() cycle. You should call this method to get a component to repaint itself. If you have done anything to change the look of the component, but not its size ( like changing color, animating, etc. ) then call this method.

sumr is implemented in terms of foldRight:

 final def sumr(implicit A: Monoid[A]): A = F.foldRight(self, A.zero)(A.append) 

foldRight is not always tail recursive, so you can overflow the stack if the collection is too long. See Why foldRight and reduceRight are NOT tail recursive? for some more discussion of when this is or isn't true.

You can also use:

\usepackage{anyfontsize}

The huge advantage of the anyfontsize package over scalefnt is that one does not need to enclose the entire {tikzpicture} with a \scalefont environment.

Just adding \usepackage{anyfontsize} to the preamble is all that is required for the font scaling magic to happen.

For Eclipse worked following expression:

Foo

jadajada Bar"

Regular-Expression:

Foo[\S\s]{1,10}.*Bar*

Address already in use means that the port you are trying to allocate for your current execution is already occupied/allocated to some other process.

If you are a developer and if you are working on an application which require lots of testing, you might have an instance of your same application running in background (may be you forgot to stop it properly)

So if you encounter this error, just see which application/process is using the port.

In linux try using netstat -tulpn. This command will list down a process list with all running processes.

Check if an application is using your port. If that application or process is another important one then you might want to use another port which is not used by any process/application.

Anyway you can stop the process which uses your port and let your application take it.

If you are in linux environment try,

• Use netstat -tulpn to display the processes
• kill <pid> This will terminate the process

If you are using windows,

• Use netstat -a -o -n to check for the port usages
• Use taskkill /F /PID <pid> to kill that process

 grep "subscription" | grep -v "spec"  

As far as I can tell, it no longer is possible in Chrome or FireFox. It may still be possible in IE (at least pre-Edge).

You would need to call RAND() for each row. Here is a good example

https://web.archive.org/web/20090216200320/http://dotnet.org.za/calmyourself/archive/2007/04/13/sql-rand-trap-same-value-per-row.aspx

@Flubba, does this allow me to have folders inside my include directory? flat include directories give me nightmares. as the whole objects directory should be in the inc directory.

Oh yes, absolutely. So for example, we use a single layer of subfolders, generally:

require_once('library/string.class.php')

You need to be careful with relying on the include path too much in really high traffic sites, because php has to hunt through the current directory and then all the directories on the include path in order to see if your file is there and this can slow things up if you're getting hammered.

So for example if you're doing MVC, you'd put the path to your application directoy in the include path and then specify refer to things in the form

'model/user.class'
'controllers/front.php'

or whatever.

But generally speaking, it just lets you work with really short paths in your PHP that will work from anywhere and it's a lot easier to read than all that realpath document root malarkey.

The benefit of those script-based alternatives others have suggested is they work anywhere, even on shared boxes; setting the include path requires a little more thought and effort but as I mentioned lets you start using __autoload which just the coolest.

try this

<!DOCTYPE html>_x000D_
<html>_x000D_
<head>_x000D_
<style>_x000D_
table, th, td {_x000D_
    border: 1px solid black;_x000D_
}_x000D_
</style>_x000D_
</head>_x000D_
<body>_x000D_
_x000D_
<table style="width:50%;">_x000D_
    <tr>_x000D_
      <th>Month</th>_x000D_
      <th>Savings</th>_x000D_
    </tr>_x000D_
    <tr style="height:100px">_x000D_
      <td valign="top">January</td>_x000D_
      <td valign="bottom">$100</td>_x000D_
    </tr>_x000D_
</table>_x000D_
_x000D_
<p><b>Note:</b> The valign attribute is not supported in HTML5. Use CSS instead.</p>_x000D_
_x000D_
</body>_x000D_
</html>

use valign="top" for td style

I like to do it like old times. You just use a custom UITextField Class like this one:

//
//  ReadOnlyTextField.swift
//  MediFormulas
//
//  Created by Oscar Rodriguez on 6/21/17.
//  Copyright © 2017 Nica Code. All rights reserved.
//

import UIKit

class ReadOnlyTextField: UITextField {

    /*
    // Only override draw() if you perform custom drawing.
    // An empty implementation adversely affects performance during animation.
    override func draw(_ rect: CGRect) {
        // Drawing code
    }
    */

    override init(frame: CGRect) {
        super.init(frame: frame)

        // Avoid keyboard to show up
        self.inputView = UIView()
    }

    required init?(coder aDecoder: NSCoder) {
        super.init(coder: aDecoder)

        // Avoid keyboard to show up
        self.inputView = UIView()
    }

    override func canPerformAction(_ action: Selector, withSender sender: Any?) -> Bool {
        // Avoid cut and paste option show up
        if (action == #selector(self.cut(_:))) {
            return false
        } else if (action == #selector(self.paste(_:))) {
            return false
        }

        return super.canPerformAction(action, withSender: sender)
    }

}

It is not a good practice but even though you wish to use it you can use the singleton pattern as its good. I have used the singleton patterns in most of my project its good.

If there is no selection, you can use the properties .selectionStart or .selectionEnd (with no selection they're equal).

var cursorPosition = $('#myTextarea').prop("selectionStart");

Note that this is not supported in older browsers, most notably IE8-. There you'll have to work with text ranges, but it's a complete frustration.

I believe there is a library somewhere which is dedicated to getting and setting selections/cursor positions in input elements, though. I can't recall its name, but there seem to be dozens on articles about this subject.

I think the project you are looking for is: https://github.com/sarxos/webcam-capture (I'm the author)

There is an example working exactly as you've described - after it's run, the window appear where, after you press "Start" button, you can see live image from webcam device and save it to file after you click on "Snapshot" (source code available, please note that FPS counter in the corner can be disabled):

The project is portable (WinXP, Win7, Win8, Linux, Mac, Raspberry Pi) and does not require any additional software to be installed on the PC.

API is really nice and easy to learn. Example how to capture single image and save it to PNG file:

Webcam webcam = Webcam.getDefault();
webcam.open();
ImageIO.write(webcam.getImage(), "PNG", new File("test.png"));

Adding local classes, lambdas and the toString() method to complete the previous two answers. Further, I add arrays of lambdas and arrays of anonymous classes (which do not make any sense in practice though):

package com.example;

public final class TestClassNames {
    private static void showClass(Class<?> c) {
        System.out.println("getName():          " + c.getName());
        System.out.println("getCanonicalName(): " + c.getCanonicalName());
        System.out.println("getSimpleName():    " + c.getSimpleName());
        System.out.println("toString():         " + c.toString());
        System.out.println();
    }

    private static void x(Runnable r) {
        showClass(r.getClass());
        showClass(java.lang.reflect.Array.newInstance(r.getClass(), 1).getClass()); // Obtains an array class of a lambda base type.
    }

    public static class NestedClass {}

    public class InnerClass {}

    public static void main(String[] args) {
        class LocalClass {}
        showClass(void.class);
        showClass(int.class);
        showClass(String.class);
        showClass(Runnable.class);
        showClass(SomeEnum.class);
        showClass(SomeAnnotation.class);
        showClass(int[].class);
        showClass(String[].class);
        showClass(NestedClass.class);
        showClass(InnerClass.class);
        showClass(LocalClass.class);
        showClass(LocalClass[].class);
        Object anonymous = new java.io.Serializable() {};
        showClass(anonymous.getClass());
        showClass(java.lang.reflect.Array.newInstance(anonymous.getClass(), 1).getClass()); // Obtains an array class of an anonymous base type.
        x(() -> {});
    }
}

enum SomeEnum {
   BLUE, YELLOW, RED;
}

@interface SomeAnnotation {}

This is the full output:

getName():          void
getCanonicalName(): void
getSimpleName():    void
toString():         void

getName():          int
getCanonicalName(): int
getSimpleName():    int
toString():         int

getName():          java.lang.String
getCanonicalName(): java.lang.String
getSimpleName():    String
toString():         class java.lang.String

getName():          java.lang.Runnable
getCanonicalName(): java.lang.Runnable
getSimpleName():    Runnable
toString():         interface java.lang.Runnable

getName():          com.example.SomeEnum
getCanonicalName(): com.example.SomeEnum
getSimpleName():    SomeEnum
toString():         class com.example.SomeEnum

getName():          com.example.SomeAnnotation
getCanonicalName(): com.example.SomeAnnotation
getSimpleName():    SomeAnnotation
toString():         interface com.example.SomeAnnotation

getName():          [I
getCanonicalName(): int[]
getSimpleName():    int[]
toString():         class [I

getName():          [Ljava.lang.String;
getCanonicalName(): java.lang.String[]
getSimpleName():    String[]
toString():         class [Ljava.lang.String;

getName():          com.example.TestClassNames$NestedClass
getCanonicalName(): com.example.TestClassNames.NestedClass
getSimpleName():    NestedClass
toString():         class com.example.TestClassNames$NestedClass

getName():          com.example.TestClassNames$InnerClass
getCanonicalName(): com.example.TestClassNames.InnerClass
getSimpleName():    InnerClass
toString():         class com.example.TestClassNames$InnerClass

getName():          com.example.TestClassNames$1LocalClass
getCanonicalName(): null
getSimpleName():    LocalClass
toString():         class com.example.TestClassNames$1LocalClass

getName():          [Lcom.example.TestClassNames$1LocalClass;
getCanonicalName(): null
getSimpleName():    LocalClass[]
toString():         class [Lcom.example.TestClassNames$1LocalClass;

getName():          com.example.TestClassNames$1
getCanonicalName(): null
getSimpleName():    
toString():         class com.example.TestClassNames$1

getName():          [Lcom.example.TestClassNames$1;
getCanonicalName(): null
getSimpleName():    []
toString():         class [Lcom.example.TestClassNames$1;

getName():          com.example.TestClassNames$$Lambda$1/1175962212
getCanonicalName(): com.example.TestClassNames$$Lambda$1/1175962212
getSimpleName():    TestClassNames$$Lambda$1/1175962212
toString():         class com.example.TestClassNames$$Lambda$1/1175962212

getName():          [Lcom.example.TestClassNames$$Lambda$1;
getCanonicalName(): com.example.TestClassNames$$Lambda$1/1175962212[]
getSimpleName():    TestClassNames$$Lambda$1/1175962212[]
toString():         class [Lcom.example.TestClassNames$$Lambda$1;

So, here are the rules. First, lets start with primitive types and void:

1. If the class object represents a primitive type or void, all the four methods simply returns its name.

Now the rules for the getName() method:

2. Every non-lambda and non-array class or interface (i.e, top-level, nested, inner, local and anonymous) has a name (which is returned by getName()) that is the package name followed by a dot (if there is a package), followed by the name of its class-file as generated by the compiler (whithout the suffix .class). If there is no package, it is simply the name of the class-file. If the class is an inner, nested, local or anonymous class, the compiler should generate at least one $ in its class-file name. Note that for anonymous classes, the class name would end with a dollar-sign followed by a number.
3. Lambda class names are generally unpredictable, and you shouldn't care about they anyway. Exactly, their name is the name of the enclosing class, followed by $$Lambda$, followed by a number, followed by a slash, followed by another number.
4. The class descriptor of the primitives are Z for boolean, B for byte, S for short, C for char, I for int, J for long, F for float and D for double. For non-array classes and interfaces the class descriptor is L followed by what is given by getName() followed by ;. For array classes, the class descriptor is [ followed by the class descriptor of the component type (which may be itself another array class).
5. For array classes, the getName() method returns its class descriptor. This rule seems to fail only for array classes whose the component type is a lambda (which possibly is a bug), but hopefully this should not matter anyway because there is no point even on the existence of array classes whose component type is a lambda.

Now, the toString() method:

6. If the class instance represents an interface (or an annotation, which is a special type of interface), the toString() returns "interface " + getName(). If it is a primitive, it returns simply getName(). If it is something else (a class type, even if it is a pretty weird one), it returns "class " + getName().

The getCanonicalName() method:

7. For top-level classes and interfaces, the getCanonicalName() method returns just what the getName() method returns.
8. The getCanonicalName() method returns null for anonymous or local classes and for array classes of those.
9. For inner and nested classes and interfaces, the getCanonicalName() method returns what the getName() method would replacing the compiler-introduced dollar-signs by dots.
10. For array classes, the getCanonicalName() method returns null if the canonical name of the component type is null. Otherwise, it returns the canonical name of the component type followed by [].

The getSimpleName() method:

11. For top-level, nested, inner and local classes, the getSimpleName() returns the name of the class as written in the source file.
12. For anonymous classes the getSimpleName() returns an empty String.
13. For lambda classes the getSimpleName() just returns what the getName() would return without the package name. This do not makes much sense and looks like a bug for me, but there is no point in calling getSimpleName() on a lambda class to start with.
14. For array classes the getSimpleName() method returns the simple name of the component class followed by []. This have the funny/weird side-effect that array classes whose component type is an anonymous class have just [] as their simple names.

well, easiest way would be something like:

var address = theEncodedString.split(/~/)
var name = address[0], street = address[1]

You can easily add it to native String object in JavaScript and reuse it over and over...
Something simple like below code can do the job for you if you want to check '' empty strings:

String.prototype.isEmpty = String.prototype.isEmpty || function() {
  return !(!!this.length);
}

Otherwise if you'd like to check both '' empty string and ' ' with space, you can do that by just adding trim(), something like the code below:

String.prototype.isEmpty = String.prototype.isEmpty || function() {
   return !(!!this.trim().length);
}

and you can call it this way:

''.isEmpty(); //return true
'alireza'.isEmpty(); //return false

import java.io.File;
import java.io.FileNotFoundException;
import java.io.PrintWriter;

public class CsvFile {

    public static void main(String[]args){
        PrintWriter pw = null;
        try {
            pw = new PrintWriter(new File("NewData.csv"));
        } catch (FileNotFoundException e) {
            e.printStackTrace();
        }
        StringBuilder builder = new StringBuilder();
        String columnNamesList = "Id,Name";
        // No need give the headers Like: id, Name on builder.append
        builder.append(columnNamesList +"\n");
        builder.append("1"+",");
        builder.append("Chola");
        builder.append('\n');
        pw.write(builder.toString());
        pw.close();
        System.out.println("done!");
    }
}

Why would the first way not work. Canvas object is created and the size is set and the grahpics are set. I always find this strange. Also if a class extends JComponent you can override the

paintComponent(){
  super...
}

and then shouldn't you be able to create and instance of the class inside of another class and then just call NewlycreateinstanceOfAnyClass.repaint();

I have tried this approach for some game programming I have been working and it doesn't seem to work the way I think that it should be.

Doug Hauf

This was taken from a Yahoo Answer:

A thread is a coding construct unaffect by the architecture of an application. A single process frequently may contain multiple threads. Threads can also directly communicate with each other since they share the same variables.

Processes are independent execution units with their own state information. They also use their own address spaces and can only interact with other processes through interprocess communication mechanisms.

However, to put in simpler terms threads are like different "tasks". So think of when you are doing something, for instance you are writing down a formula on one paper. That can be considered one thread. Then another thread is you writing something else on another piece of paper. That is where multitasking comes in.

Intel processors are said to have "hyper-threading" (AMD has it too) and it is meant to be able to perform multiple "threads" or multitask much better.

I am not sure about the logistics of how a thread is handled. I do recall hearing about the processor going back and forth between them, but I am not 100% sure about this and hopefully somebody else can answer that.

Applying the Observer Pattern with delegates and events in c# is named "Event Pattern" according to MSDN which is a slight variation.

In this Article you will find well structured examples of how to apply the pattern in c# both the classic way and using delegates and events.

Exploring the Observer Design Pattern

public class Stock
{

    //declare a delegate for the event
    public delegate void AskPriceChangedHandler(object sender,
          AskPriceChangedEventArgs e);
    //declare the event using the delegate
    public event AskPriceChangedHandler AskPriceChanged;

    //instance variable for ask price
    object _askPrice;

    //property for ask price
    public object AskPrice
    {

        set
        {
            //set the instance variable
            _askPrice = value;

            //fire the event
            OnAskPriceChanged();
        }

    }//AskPrice property

    //method to fire event delegate with proper name
    protected void OnAskPriceChanged()
    {

        AskPriceChanged(this, new AskPriceChangedEventArgs(_askPrice));

    }//AskPriceChanged

}//Stock class

//specialized event class for the askpricechanged event
public class AskPriceChangedEventArgs : EventArgs
{

    //instance variable to store the ask price
    private object _askPrice;

    //constructor that sets askprice
    public AskPriceChangedEventArgs(object askPrice) { _askPrice = askPrice; }

    //public property for the ask price
    public object AskPrice { get { return _askPrice; } }

}//AskPriceChangedEventArgs

Simply You can use following methods.

using (WebClient client = new WebClient()) 
{
    client.DownloadFile(new Uri(url), @"c:\temp\image35.png");
    // OR 
    client.DownloadFileAsync(new Uri(url), @"c:\temp\image35.png");
}

These methods are almost same as DownloadString(..) and DownloadStringAsync(...). They store the file in Directory rather than in C# string and no need of Format extension in URi

If You don't know the Format(.png, .jpeg etc) of Image

public void SaveImage(string filename, ImageFormat format)
{    
    WebClient client = new WebClient();
    Stream stream = client.OpenRead(imageUrl);
    Bitmap bitmap;  bitmap = new Bitmap(stream);

    if (bitmap != null)
    {
        bitmap.Save(filename, format);
    }

    stream.Flush();
    stream.Close();
    client.Dispose();
}

Using it

try
{
    SaveImage("--- Any Image Path ---", ImageFormat.Png)
}
catch(ExternalException)
{
    // Something is wrong with Format -- Maybe required Format is not 
    // applicable here
}
catch(ArgumentNullException)
{   
    // Something wrong with Stream
}

Yet another reason (not for this case, but maybe it'll save some nerves for someone) is that in PHP 5.5 short open tags <? phpinfo(); ?> are disabled by default.

So the PHP interpreter would process code within short tags as plain text. In previous versions PHP this feature was enable by default. So the new behaviour can be a little bit mysterious.

I set the PHPRC variable and uncommented zend_extension=php_opcache.dll in php.ini and all works well.

I know there are many answers already but the best one that worked for me for a complex json structure is:

var arr = [{ "State": "RWCW", "desc": "WEST", "code": "RWCW", "level": 0, "save": "RWCW : WEST", "attribute1": "", "attribute2": "" }, { "State": "RSCW", "desc": "SOUTHEAST", "code": "RSCW", "level": 0, "save": "RSCW : SOUTHEAST", "attribute1": "", "attribute2": "" }, { "State": "RCSW", "desc": "SOUTHWEST", "code": "RCSW", "level": 0, "save": "RCSW : SOUTHWEST", "attribute1": "", "attribute2": "" }, { "State": "RECW", "desc": "NORTHEAST", "code": "RECW", "level": 0, "save": "RECW : NORTHEAST", "attribute1": "", "attribute2": "" }, { "State": "RWCW", "desc": "WEST", "code": "RWCW", "level": 0, "save": "RWCW : WEST", "attribute1": "", "attribute2": "" }, { "State": "RWCW", "desc": "WEST", "code": "RWCW", "level": 0, "save": "RWCW : WEST", "attribute1": "", "attribute2": "" }, { "State": "RSCW", "desc": "SOUTHEAST", "code": "RSCW", "level": 0, "save": "RSCW : SOUTHEAST", "attribute1": "", "attribute2": "" }, { "State": "RCSW", "desc": "SOUTHWEST", "code": "RCSW", "level": 0, "save": "RCSW : SOUTHWEST", "attribute1": "", "attribute2": "" }, { "State": "RECW", "desc": "NORTHEAST", "code": "RECW", "level": 0, "save": "RECW : NORTHEAST", "attribute1": "", "attribute2": "" }, { "State": "RWCW", "desc": "WEST", "code": "RWCW", "level": 0, "save": "RWCW : WEST", "attribute1": "", "attribute2": "" }, { "State": "RSCW", "desc": "SOUTHEAST", "code": "RSCW", "level": 0, "save": "RSCW : SOUTHEAST", "attribute1": "", "attribute2": "" }, { "State": "RECW", "desc": "NORTHEAST", "code": "RECW", "level": 0, "save": "RECW : NORTHEAST", "attribute1": "", "attribute2": "" }, { "State": "RWCW", "desc": "WEST", "code": "RWCW", "level": 0, "save": "RWCW : WEST", "attribute1": "", "attribute2": "" }, { "State": "RCSW", "desc": "SOUTHWEST", "code": "RCSW", "level": 0, "save": "RCSW : SOUTHWEST", "attribute1": "", "attribute2": "" }, { "State": "RWCW", "desc": "WEST", "code": "RWCW", "level": 0, "save": "RWCW : WEST", "attribute1": "", "attribute2": "" }, { "State": "RCNW", "desc": "MIDWEST", "code": "RCNW", "level": 0, "save": "RCNW : MIDWEST", "attribute1": "", "attribute2": "" }, { "State": "RCSW", "desc": "SOUTHWEST", "code": "RCSW", "level": 0, "save": "RCSW : SOUTHWEST", "attribute1": "", "attribute2": "" }, { "State": "RECW", "desc": "NORTHEAST", "code": "RECW", "level": 0, "save": "RECW : NORTHEAST", "attribute1": "", "attribute2": "" }, { "State": "RCNW", "desc": "MIDWEST", "code": "RCNW", "level": 0, "save": "RCNW : MIDWEST", "attribute1": "", "attribute2": "" }, { "State": "RSCW", "desc": "SOUTHEAST", "code": "RSCW", "level": 0, "save": "RSCW : SOUTHEAST", "attribute1": "", "attribute2": "" }, { "State": "RECW", "desc": "NORTHEAST", "code": "RECW", "level": 0, "save": "RECW : NORTHEAST", "attribute1": "", "attribute2": "" }, { "State": "RCNW", "desc": "MIDWEST", "code": "RCNW", "level": 0, "save": "RCNW : MIDWEST", "attribute1": "", "attribute2": "" }, { "State": "RSCW", "desc": "SOUTHEAST", "code": "RSCW", "level": 0, "save": "RSCW : SOUTHEAST", "attribute1": "", "attribute2": "" }, { "State": "RSCW", "desc": "SOUTHEAST", "code": "RSCW", "level": 0, "save": "RSCW : SOUTHEAST", "attribute1": "", "attribute2": "" }, { "State": "RSCW", "desc": "SOUTHEAST", "code": "RSCW", "level": 0, "save": "RSCW : SOUTHEAST", "attribute1": "", "attribute2": "" }, { "State": "RCNW", "desc": "MIDWEST", "code": "RCNW", "level": 0, "save": "RCNW : MIDWEST", "attribute1": "", "attribute2": "" }, { "State": "RSCW", "desc": "SOUTHEAST", "code": "RSCW", "level": 0, "save": "RSCW : SOUTHEAST", "attribute1": "", "attribute2": "" }, { "State": "RECW", "desc": "NORTHEAST", "code": "RECW", "level": 0, "save": "RECW : NORTHEAST", "attribute1": "", "attribute2": "" }];_x000D_
_x000D_
var clean = arr.filter((arr, index, self) =>_x000D_
    index === self.findIndex((t) => (t.save === arr.save && t.State === arr.State)))_x000D_
_x000D_
console.log(clean);

You can try this directly to chrome browser console and edit according to your need.

I hope this helps someone.

I take the below approach to remove the item in slice. This helps in readability for others. And also immutable.

func remove(items []string, item string) []string {
    newitems := []string{}

    for _, i := range items {
        if i != item {
            newitems = append(newitems, i)
        }
    }

    return newitems
}

I have a query like below, but with ODBC driver SQLite has an error with "," it says. I run vbscript in HTA (Html Application).

INSERT INTO evrak_ilac_iliskileri (evrak_id, ilac_id, baglayan_kullanici_id, tarih) VALUES (4150,762,1,datetime()),(4150,9770,1,datetime()),(4150,6609,1,datetime()),(4150,3628,1,datetime()),(4150,9422,1,datetime())

Create a 3D matrix

A = zeros(20, 10, 3);   %# Creates a 20x10x3 matrix

Add a 3rd dimension to a matrix

B = zeros(4,4);  
C = zeros(size(B,1), size(B,2), 4);  %# New matrix with B's size, and 3rd dimension of size 4
C(:,:,1) = B;                        %# Copy the content of B into C's first set of values

zeros is just one way of making a new matrix. Another could be A(1:20,1:10,1:3) = 0 for a 3D matrix. To confirm the size of your matrices you can run: size(A) which gives 20 10 3.

There is no explicit bound on the number of dimensions a matrix may have.

Actually VBA can be used to compile DLLs. The Office 2000 and Office XP Developer editions included a VBA editor that could be used for making DLLs for use as COM Addins.

This functionality was removed in later versions (2003 and 2007) with the advent of the VSTO (VS Tools for Office) software, although obviously you could still create COM addins in a similar fashion without the use of VSTO (or VS.Net) by using VB6 IDE.

If you are working on localhost, create a separate APIkey for your development and then remove restrictions on that key so that your localhost can use it. Remember to not use this key on production, so you don't expose your key to hunters online.

I had the same issue and all attempts to get the restrictions working on my localhost environment was not successful until I created a separate apikey specifically for development and then removed its restrictions. However I don't use that key on production environment, and once am done with developments, I will delete the API key immediately.

I Know this post is late, but for people that will likely face this issue in the future, this is the best route to go.

Here's another minimal way to do it in CSS that works even in older browsers that do not support :nth-child and the like selectors: http://jsfiddle.net/3wZWt/.

HTML:

<table>
    <tr>
        <th>From</th>
        <th>Subject</th>
        <th>Date</th>
    </tr>
    <tr>
        <td>Dmitriy</td>
        <td>Learning CSS</td>
        <td>7/5/2014</td>
    </tr>
</table>

CSS:

table {
    border-collapse: collapse;
    width: 100%;
}

tr > * {
    border: 1px solid #000;
}

tr > th + th {
    width: 70%;
}

tr > th + th + th {
    width: 15%;
}

have a look at this from MySQL Reference manual:

First login mysql:

# mysql -u root -p

Then at mysql prompt run:

UPDATE mysql.user SET Password=PASSWORD('MyNewPass') WHERE User='root';

Then

FLUSH PRIVILEGES;

Look at this page for more information: Resetting the Root Password: Unix Systems

True ... and False obviously.

Otherwise, None evaluates to False, as does the integer 0 and also the float 0.0 (although I wouldn't use floats like that). Also, empty lists [], empty tuplets (), and empty strings '' or "" evaluate to False.

Try it yourself with the function bool():

bool([])
bool(['a value'])
bool('')
bool('A string')
bool(True)  # ;-)
bool(False)
bool(0)
bool(None)
bool(0.0)
bool(1)

etc..

Strangely you must put the 'font-weight: 900' in some icons so that it shows them.

#mainNav .navbar-collapse .navbar-sidenav .nav-link-collapse:after {
  content: '\f107';
  font-family: 'Font Awesome\ 5 Free'; 
  font-weight: 900; /* Fix version 5.0.9 */
}

Here is a util function modified (another post on stack) for get and post both. Make Util.js file.

let cachedData = null;
let cachedPostData = null;

const postServiceData = (url, params) => {
    console.log('cache status' + cachedPostData );
    if (cachedPostData === null) {
        console.log('post-data: requesting data');
        return fetch(url, {
            method: 'POST',
            headers: {
              'Accept': 'application/json',
              'Content-Type': 'application/json',
            },
            body: JSON.stringify(params)
          })
        .then(response => {
            cachedPostData = response.json();
            return cachedPostData;
        });
    } else {
        console.log('post-data: returning cachedPostData data');
        return Promise.resolve(cachedPostData);
    }
}

const getServiceData = (url) => {
    console.log('cache status' + cachedData );
    if (cachedData === null) {
        console.log('get-data: requesting data');
        return fetch(url, {})
        .then(response => {
            cachedData = response.json();
            return cachedData;
        });
    } else {
        console.log('get-data: returning cached data');
        return Promise.resolve(cachedData);
    }
};

export  { getServiceData, postServiceData };

Usage like below in another component

import { getServiceData, postServiceData } from './../Utils/Util';

constructor(props) {
    super(props)
    this.state = {
      datastore : []
    }
  }

componentDidMount = () => {  
    let posturl = 'yoururl'; 
    let getdataString = { name: "xys", date:"today"};  
    postServiceData(posturl, getdataString)
      .then(items => { 
        this.setState({ datastore: items }) 
      console.log(items);   
    });
  }

I know that it could be done with a FOR but I wanted to know if there's another way

There is another way. You can also do it with map and itemgetter:

>>> from operator import itemgetter
>>> map(itemgetter(1), elements)

This still performs a loop internally though and it is slightly slower than the list comprehension:

setup = 'elements = [(1,1,1) for _ in range(100000)];from operator import itemgetter'
method1 = '[x[1] for x in elements]'
method2 = 'map(itemgetter(1), elements)'

import timeit
t = timeit.Timer(method1, setup)
print('Method 1: ' + str(t.timeit(100)))
t = timeit.Timer(method2, setup)
print('Method 2: ' + str(t.timeit(100)))

Results:

Method 1: 1.25699996948
Method 2: 1.46600008011

If you need to iterate over a list then using a for is fine.

Here's some prebuilt Objective-C dictionaries if anyone wants to type ansi characters:

NSDictionary *lowerCaseCodes = @{
                                @"Q" : @(12),
                                @"W" : @(13),
                                @"E" : @(14),
                                @"R" : @(15),
                                @"T" : @(17),
                                @"Y" : @(16),
                                @"U" : @(32),
                                @"I" : @(34),
                                @"O" : @(31),
                                @"P" : @(35),
                                @"A" : @(0),
                                @"S" : @(1),
                                @"D" : @(2),
                                @"F" : @(3),
                                @"G" : @(5),
                                @"H" : @(4),
                                @"J" : @(38),
                                @"K" : @(40),
                                @"L" : @(37),
                                @"Z" : @(6),
                                @"X" : @(7),
                                @"C" : @(8),
                                @"V" : @(9),
                                @"B" : @(11),
                                @"N" : @(45),
                                @"M" : @(46),
                                @"0" : @(29),
                                @"1" : @(18),
                                @"2" : @(19),
                                @"3" : @(20),
                                @"4" : @(21),
                                @"5" : @(23),
                                @"6" : @(22),
                                @"7" : @(26),
                                @"8" : @(28),
                                @"9" : @(25),
                                @" " : @(49),
                                @"." : @(47),
                                @"," : @(43),
                                @"/" : @(44),
                                @";" : @(41),
                                @"'" : @(39),
                                @"[" : @(33),
                                @"]" : @(30),
                                @"\\" : @(42),
                                @"-" : @(27),
                                @"=" : @(24)
                                };

NSDictionary *shiftCodes = @{ // used in conjunction with the shift key
                                @"<" : @(43),
                                @">" : @(47),
                                @"?" : @(44),
                                @":" : @(41),
                                @"\"" : @(39),
                                @"{" : @(33),
                                @"}" : @(30),
                                @"|" : @(42),
                                @")" : @(29),
                                @"!" : @(18),
                                @"@" : @(19),
                                @"#" : @(20),
                                @"$" : @(21),
                                @"%" : @(23),
                                @"^" : @(22),
                                @"&" : @(26),
                                @"*" : @(28),
                                @"(" : @(25),
                                @"_" : @(27),
                                @"+" : @(24)
                                };

What is the best way to implement Singleton in Java, in a multithreaded environment?

Refer to this post for best way to implement Singleton.

What is an efficient way to implement a singleton pattern in Java?

What happens when multiple threads try to access getInstance() method at the same time?

It depends on the way you have implemented the method.If you use double locking without volatile variable, you may get partially constructed Singleton object.

Refer to this question for more details:

Why is volatile used in this example of double checked locking

Can we make singleton's getInstance() synchronized?

Is synchronization really needed, when using Singleton classes?

Not required if you implement the Singleton in below ways

1. static intitalization
2. enum
3. LazyInitalaization with Initialization-on-demand_holder_idiom

Refer to this question fore more details

Java Singleton Design Pattern : Questions

An arbitrary OAuth access token can't be used for authentication, because the meaning of the token is outside of the OAuth Core spec. It could be intended for a single use or narrow expiration window, or it could provide access which the user doesn't want to give. It's also opaque, and the OAuth consumer which obtained it might never have seen any type of user identifier.

An OAuth service provider and one or more consumers could easily use OAuth to provide a verifiable authentication token, and there are proposals and ideas to do this out there, but an arbitrary service provider speaking only OAuth Core can't provide this without other co-ordination with a consumer. The Google-specific AuthSubTokenInfo REST method, along with the user's identifier, is close, but it isn't suitable, either, since it could invalidate the token, or the token could be expired.

If your Google ID is an OpenId identifier, and your 'public interface' is either a web app or can call up the user's browser, then you should probably use Google's OpenID OP.

OpenID consists of just sending the user to the OP and getting a signed assertion back. The interaction is solely for the benefit of the RP. There is no long-lived token or other user-specific handle which could be used to indicate that a RP has successfully authenticated a user with an OP.

One way to verify a previous authentication against an OpenID identifier is to just perform authentication again, assuming the same user-agent is being used. The OP should be able to return a positive assertion without user interaction (by verifying a cookie or client cert, for example). The OP is free to require another user interaction, and probably will if the authentication request is coming from another domain (my OP gives me the option to re-authenticate this particular RP without interacting in the future). And in Google's case, the UI that the user went through to get the OAuth token might not use the same session identifier, so the user will have to re-authenticate. But in any case, you'll be able to assert the identity.

Your idea of an hidden form element is solid. Something like this

<form action="script.php" method="post">
<input type="hidden" name="total" id="total">
</form>

<script type="text/javascript">
var element = document.getElementById("total");
element.value = getTotalFromSomewhere;
element.form.submit();
</script>

Of course, this will change the location to script.php. If you want to do this invisibly to the user, you'll want to use AJAX. Here's a jQuery example (for brevity). No form or hidden inputs required

$.post("script.php", { total: getTotalFromSomewhere });

Use __LINE__ (that's double-underscore LINE double-underscore), the preprocessor will replace it with the line number on which it is encountered.

<input type ="text" id="txtComputer">

css

input[type="text"]
{
    font-size:24px;
}

I think every process you make start executing the line you create so something like this...

pid=fork() at line 6. fork function returns 2 values 
you have 2 pids, first pid=0 for child and pid>0 for parent 
so you can use if to separate

.

/*
    sleep(int time) to see clearly
    <0 fail 
    =0 child
    >0 parent
*/
int main(int argc, char** argv) {
    pid_t childpid1, childpid2;
    printf("pid = process identification\n");
    printf("ppid = parent process identification\n");
    childpid1 = fork();
    if (childpid1 == -1) {
        printf("Fork error !\n");
    }
    if (childpid1 == 0) {
        sleep(1);
        printf("child[1] --> pid = %d and  ppid = %d\n",
                getpid(), getppid());
    } else {
        childpid2 = fork();
        if (childpid2 == 0) {
            sleep(2);
            printf("child[2] --> pid = %d and ppid = %d\n",
                    getpid(), getppid());
        } else {
            sleep(3);
            printf("parent --> pid = %d\n", getpid());
        }
    }
    return 0;
}

//pid = process identification
//ppid = parent process identification
//child[1] --> pid = 2399 and  ppid = 2398
//child[2] --> pid = 2400 and ppid = 2398
//parent --> pid = 2398

linux.die.net

some uni stuff

extern template is only needed if the template declaration is complete

This was hinted at in other answers, but I don't think enough emphasis was given to it.

What this means is that in the OPs examples, the extern template has no effect because the template definitions on the headers were incomplete:

• void f();: just declaration, no body
• class foo: declares method f() but has no definition

So I would recommend just removing the extern template definition in that particular case: you only need to add them if the classes are completely defined.

For example:

TemplHeader.h

template<typename T>
void f();

TemplCpp.cpp

template<typename T>
void f(){}

// Explicit instantiation for char.
template void f<char>();

Main.cpp

#include "TemplHeader.h"

// Commented out from OP code, has no effect.
// extern template void f<T>(); //is this correct?

int main() {
    f<char>();
    return 0;
}

compile and view symbols with nm:

g++ -std=c++11 -Wall -Wextra -pedantic -c -o TemplCpp.o TemplCpp.cpp
g++ -std=c++11 -Wall -Wextra -pedantic -c -o Main.o Main.cpp
g++ -std=c++11 -Wall -Wextra -pedantic -o Main.out Main.o TemplCpp.o
echo TemplCpp.o
nm -C TemplCpp.o | grep f
echo Main.o
nm -C Main.o | grep f

output:

TemplCpp.o
0000000000000000 W void f<char>()
Main.o
                 U void f<char>()

and then from man nm we see that U means undefined, so the definition did stay only on TemplCpp as desired.

All this boils down to the tradeoff of complete header declarations:

• upsides:
  • allows external code to use our template with new types
  • we have the option of not adding explicit instantiations if we are fine with object bloat
• downsides:
  • when developing that class, header implementation changes will lead smart build systems to rebuild all includers, which could be many many files
  • if we want to avoid object file bloat, we need not only to do explicit instantiations (same as with incomplete header declarations) but also add extern template on every includer, which programmers will likely forget to do

Further examples of those are shown at: Explicit template instantiation - when is it used?

Since compilation time is so critical in large projects, I would highly recommend incomplete template declarations, unless external parties absolutely need to reuse your code with their own complex custom classes.

And in that case, I would first try to use polymorphism to avoid the build time problem, and only use templates if noticeable performance gains can be made.

Tested in Ubuntu 18.04.

In Blade file

@if (Request::is('companies'))
   Companies name 
@endif

For a simple approach using jQuery I've found this to work well:

  // Wait for element to exist.
  function elementLoaded(el, cb) {
    if ($(el).length) {
      // Element is now loaded.
      cb($(el));
    } else {
      // Repeat every 500ms.
      setTimeout(function() {
        elementLoaded(el, cb)
      }, 500);
    }
  };

  elementLoaded('.element-selector', function(el) {
    // Element is ready to use.
    el.click(function() {
      alert("You just clicked a dynamically inserted element");
    });
  });

Here we simply check every 500ms to see whether the element is loaded, when it is, we can use it.

This is especially useful for adding click handlers to elements which have been dynamically added to the document.

I had a similar issue with Docker for Windows and Hyper-V having reserved ports for its own use- in my case, it was port 3001 that couldn't be accessed.

• The port wasn't be used by another process- running netstat -ano | findstr 3001 in an Administrator Powershell prompt showed nothing.
• However, netsh interface ipv4 show excludedportrange protocol=tcp showed that the port was in one of the exclusion ranges.

I was able to follow the solution described in Docker for Windows issue #3171 (Unable to bind ports: Docker-for-Windows & Hyper-V excluding but not using important port ranges):

1. Disable Hyper-V:

   dism.exe /Online /Disable-Feature:Microsoft-Hyper-V
   

2. After the required restarts, reserve the port you want so Hyper-V doesn't reserve it back:

   netsh int ipv4 add excludedportrange protocol=tcp startport=3001 numberofports=1
   

3. Reenable Hyper-V:

   dism.exe /Online /Enable-Feature:Microsoft-Hyper-V /All
   

After this, I was able to start my docker container.

You can use this:

columnsTitles = ['onething', 'secondthing', 'otherthing']

frame = frame.reindex(columns=columnsTitles)

Do step by step as shown in this YouTube Video

Go to: System -> Advanced system settings -> Environment Variables

Add a new variable to you profile NAME=JAVA_HOME STRING: Program Files/java/"your string" Save and Start Android Studio ;)

You can achieve this by following code,

$integerIDs = array_map('intval', explode(',', $string));

I just went through the same problem. And found out once you have a syntax or any type of error in you javascript, the whole file don't get loaded so you cannot use any of the other functions at all.

What the status is telling you is that you're behind the ref called origin/master which is a local ref in your local repo. In this case that ref happens to track a branch in some remote, called origin, but the status is not telling you anything about the branch on the remote. It's telling you about the ref, which is just a commit ID stored on your local filesystem (in this case, it's typically in a file called .git/refs/remotes/origin/master in your local repo).

git pull does two operations; first it does a git fetch to get up to date with the commits in the remote repo (which updates the origin/master ref in your local repo), then it does a git merge to merge those commits into the current branch.

Until you do the fetch step (either on its own or via git pull) your local repo has no way to know that there are additional commits upstream, and git status only looks at your local origin/master ref.

When git status says up-to-date, it means "up-to-date with the branch that the current branch tracks", which in this case means "up-to-date with the local ref called origin/master". That only equates to "up-to-date with the upstream status that was retrieved last time we did a fetch" which is not the same as "up-to-date with the latest live status of the upstream".

Why does it work this way? Well the fetch step is a potentially slow and expensive network operation. The design of Git (and other distributed version control systems) is to avoid network operations when unnecessary, and is a completely different model to the typical client-server system many people are used to (although as pointed out in the comments below, Git's concept of a "remote tracking branch" that causes confusion here is not shared by all DVCSs). It's entirely possible to use Git offline, with no connection to a centralized server, and the output of git status reflects this.

Creating and switching branches (and checking their status) in Git is supposed to be lightweight, not something that performs a slow network operation to a centralized system. The assumption when designing Git, and the git status output, was that users understand this (too many Git features only make sense if you already know how Git works). With the adoption of Git by lots and lots of users who are not familiar with DVCS this assumption is not always valid.

As per this answer over here: str='foo%20%5B12%5D' encodes foo [12]:

%20 is space
%5B is '['
and %5D is ']'

This is called percent encoding and is used in encoding special characters in the url parameter values.

EDIT By the way as I was reading https://developer.mozilla.org/en-US/docs/JavaScript/Reference/Global_Objects/encodeURI#Description, it just occurred to me why so many people make the same search. See the note on the bottom of the page:

Also note that if one wishes to follow the more recent RFC3986 for URL's, making square brackets reserved (for IPv6) and thus not encoded when forming something which could be part of a URL (such as a host), the following may help.

function fixedEncodeURI (str) {
    return encodeURI(str).replace(/%5B/g, '[').replace(/%5D/g, ']');
}

Hopefully this will help people sort out their problems when they stumble upon this question.

For Mouse lovers! I say right click on resources folder and Add new resource file, and from Available qualifiers select the orientation :

But still you can do it manually by say, adding the sub-folder "layout-land" to

"Your-Project-Directory\app\src\main\res"

since then any layout.xml file under this sub-folder will only work for landscape mode automatically.

Use "layout-port" for portrait mode.

in a Visual Basic Macro you would use

pName = ActiveWorkbook.Path      ' the path of the currently active file
wbName = ActiveWorkbook.Name     ' the file name of the currently active file
shtName = ActiveSheet.Name       ' the name of the currently selected worksheet

The first sheet in a workbook can be referenced by

ActiveWorkbook.Worksheets(1)

so after deleting the [Report] tab you would use

ActiveWorkbook.Worksheets("Report").Delete
shtName = ActiveWorkbook.Worksheets(1).Name

to "work on that sheet later on" you can create a range object like

Dim MySheet as Range
MySheet = ActiveWorkbook.Worksheets(shtName).[A1]

and continue working on MySheet(rowNum, colNum) etc. ...

shortcut creation of a range object without defining shtName:

Dim MySheet as Range
MySheet = ActiveWorkbook.Worksheets(1).[A1]

REQUEST_URI is set by Apache, so you won't get it with IIS. Try doing a var_dump or print_r on $_SERVER and see what values exist there that you can use.

string tests = "abc][rfd][5][,][.";
string[] reslts = tests.Split(new char[] { ']', '[' }, StringSplitOptions.RemoveEmptyEntries);

You don't say if your array is multi-dimensional. If it is, array_map will not work alone. You need a callback method. For multi-dimensional arrays, try array_change_key_case.

// You can pass array_change_key_case a multi-dimensional array,
// or call a method that returns one
$my_array = array_change_key_case(aMethodThatReturnsMultiDimArray(), CASE_UPPER);

In your case, ('AND' and 'OR' and 'NOT') evaluates to "NOT", which may or may not be in your list...

while 'AND' not in MyList and 'OR' not in MyList and 'NOT' not in MyList:
    print 'No Boolean Operator'

In case if anyone wants to create there own exponential function using recursion, below is for your reference.

public static double power(double value, double p) {
        if (p <= 0)
            return 1;

        return value * power(value, p - 1);
    }

Here's how can do it on Windows:

"""

    Display series of numbers in infinite loop
    Listen to key "s" to stop
    Only works on Windows because listening to keys
    is platform dependent

"""

# msvcrt is a windows specific native module
import msvcrt
import time

# asks whether a key has been acquired
def kbfunc():
    #this is boolean for whether the keyboard has bene hit
    x = msvcrt.kbhit()
    if x:
        #getch acquires the character encoded in binary ASCII
        ret = msvcrt.getch()
    else:
        ret = False
    return ret

#begin the counter
number = 1

#infinite loop
while True:

    #acquire the keyboard hit if exists
    x = kbfunc() 

    #if we got a keyboard hit
    if x != False and x.decode() == 's':
        #we got the key!
        #because x is a binary, we need to decode to string
        #use the decode() which is part of the binary object
        #by default, decodes via utf8
        #concatenation auto adds a space in between
        print ("STOPPING, KEY:", x.decode())
        #break loop
        break
    else:
        #prints the number
        print (number)
        #increment, there's no ++ in python
        number += 1
        #wait half a second
        time.sleep(0.5)

onClick={this.handleRemove.bind(this, id)}

stopPropagation will prevent any parent handlers from being executed stopImmediatePropagation will prevent any parent handlers and also any other handlers from executing

Quick example from the jquery documentation:

$("p").click(function(event) {_x000D_
  event.stopImmediatePropagation();_x000D_
});_x000D_
_x000D_
$("p").click(function(event) {_x000D_
  // This function won't be executed_x000D_
  $(this).css("background-color", "#f00");_x000D_
});

<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>_x000D_
_x000D_
<p>example</p>

Note that the order of the event binding is important here!

$("p").click(function(event) {_x000D_
  // This function will now trigger_x000D_
  $(this).css("background-color", "#f00");_x000D_
});_x000D_
_x000D_
$("p").click(function(event) {_x000D_
  event.stopImmediatePropagation();_x000D_
});

<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>_x000D_
_x000D_
<p>example</p>

A function I have in an install script made for exactly this

function assertInstalled() {
    for var in "$@"; do
        if ! which $var &> /dev/null; then
            echo "Install $var!"
            exit 1
        fi
    done
}

example call:

assertInstalled zsh vim wget python pip git cmake fc-cache

updated might be what you're looking for. https://vuejs.org/v2/api/#updated

It is the ternary conditional operator.

If the condition in the parenthesis before the ? is true, it returns the value to the left of the :, otherwise the value to the right.

Actually, the best solution for this question is to use checkout commend

git checkout <branch> <path1>,<path2> ..

For example, assume you are in master, you want to the changes from dev1 on project1/Controller/WebController1.java and project1/Service/WebService1.java, you can use this:

git checkout dev1 project1/Controller/WebController1.java project1/Service/WebService1.java

That means the master branch only updates from dev1 on those two paths.

NL derived from EBCDIC NL = x'15' which would logically compare to CRLF x'odoa ascii... this becomes evident when physcally moving data from mainframes to midrange. Coloquially (as only arcane folks use ebcdic) NL has been equated with either CR or LF or CRLF

Use its name() method:

public class Main {
    public static void main(String[] args) throws Exception {
        System.out.println(Strings.ONE.name());
    }
}

enum Strings {
    ONE, TWO, THREE
}

yields ONE.

In Eclipse Photon you may need to add JUnit 4 or 5 to the build path. Right click @Test and select 'Add JUnit 4 to build path'.

In case your static code analyzer (like SonarQube) complaints, but you can not think of another way, rather than sleep, you may try with a hack like: Awaitility.await().pollDelay(Durations.ONE_SECOND).until(() -> true); It's conceptually incorrect, but it is the same as Thread.sleep(1000).

The best way, of course, is to pass a Callable, with your appropriate condition, rather than true, which I have.

https://github.com/awaitility/awaitility

nload is a great tool for monitoring bandwidth in real time and easily installed in Ubuntu or Debian with sudo apt-get install nload.

Device eth0 [10.10.10.5] (1/2):
=====================================================================================
Incoming:


                               .         ...|    
                               #         ####|   
                           .. |#|  ...   #####.         ..          Curr: 2.07 MBit/s
                          ###.###  #### #######|.     . ##      |   Avg: 1.41 MBit/s
                         ########|#########################.   ###  Min: 1.12 kBit/s
             ........    ###################################  .###  Max: 4.49 MBit/s
           .##########. |###################################|#####  Ttl: 1.94 GByte
Outgoing:
            ##########  ###########    ###########################
            ##########  ###########    ###########################
            ##########. ###########   .###########################
            ########### ###########  #############################
            ########### ###########..#############################
           ############ ##########################################
           ############ ##########################################
           ############ ##########################################  Curr: 63.88 MBit/s
           ############ ##########################################  Avg: 32.04 MBit/s
           ############ ##########################################  Min: 0.00 Bit/s
           ############ ##########################################  Max: 93.23 MBit/s
         ############## ##########################################  Ttl: 2.49 GByte

Another excellent tool is iftop, also easily apt-get'able:

             191Mb      381Mb                 572Mb       763Mb             954Mb     
+--------------------------------------------------------------------------------
box4.local            => box-2.local                      91.0Mb  27.0Mb  15.1Mb
                      <=                                  1.59Mb   761kb   452kb
box4.local            => box.local                         560b   26.8kb  27.7kb
                      <=                                   880b   31.3kb  32.1kb
box4.local            => userify.com                         0b   11.4kb  8.01kb
                      <=                                  1.17kb  2.39kb  1.75kb
box4.local            => b.resolvers.Level3.net              0b     58b    168b
                      <=                                     0b     83b    288b
box4.local            => stackoverflow.com                   0b     42b     21b
                      <=                                     0b     42b     21b
box4.local            => 224.0.0.251                         0b      0b    179b
                      <=                                     0b      0b      0b
224.0.0.251           => box-2.local                         0b      0b      0b
                      <=                                     0b      0b     36b
224.0.0.251           => box.local                           0b      0b      0b
                      <=                                     0b      0b     35b


---------------------------------------------------------------------------------
TX:           cum:   37.9MB   peak:   91.0Mb     rates:   91.0Mb  27.1Mb  15.2Mb
RX:                  1.19MB           1.89Mb              1.59Mb   795kb   486kb
TOTAL:               39.1MB           92.6Mb              92.6Mb  27.9Mb  15.6Mb

Don't forget about the classic and powerful sar and netstat utilities on older *nix!

You can do this with css transforms, though be careful with container height/width. Also you may need to position it lower:

input[type="range"] {_x000D_
   position: absolute;_x000D_
   top: 40%;_x000D_
   transform: rotate(270deg);_x000D_
}

<input type="range"/>

or the 3d transform equivalent:

input[type="range"] {
   transform: rotateZ(270deg);
}

You can also use this to switch the direction of the slide by setting it to 180deg or 90deg for horizontal or vertical respectively.

This is what I tried for a right outer join [as per my requirement]:

m1 <- merge(x=companies, y=rounds2, by.x=companies$permalink, 
            by.y=rounds2$company_permalink, all.y=TRUE)
# Error in fix.by(by.x, x) : 'by' must specify uniquely valid columns
m1 <- merge(x=companies, y=rounds2, by.x=c("permalink"), 
            by.y=c("company_permalink"), all.y=TRUE)

This worked.

1. find the node and npm version you want to use from here https://nodejs.org/en/download/releases/
2. nvm use 8.11.4
3. you already got the npm 5.6 with node 8.11.4

Just go with nvm use node_version

(KOTLIN) So, as of April 7th, 2020 none of the above mentioned options worked, but here's what worked for me:

1. If you want to store the bitmap in a val and set an imageView with it, use this:

   val bitmap = BitmapFactory.decodeFile(currentPhotoPath).also { bitmap -> imageView.setImageBitmap(bitmap) }

2. If you just want to set the bitmap to and imageView, use this:

   BitmapFactory.decodeFile(currentPhotoPath).also { bitmap -> imageView.setImageBitmap(bitmap) }