long and long int are identical. So are long long and long long int. In both cases, the int is optional.

As to the difference between the two sets, the C++ standard mandates minimum ranges for each, and that long long is at least as wide as long.

The controlling parts of the standard (C++11, but this has been around for a long time) are, for one, 3.9.1 Fundamental types, section 2 (a later section gives similar rules for the unsigned integral types):

There are five standard signed integer types : signed char, short int, int, long int, and long long int. In this list, each type provides at least as much storage as those preceding it in the list.

There's also a table 9 in 7.1.6.2 Simple type specifiers, which shows the "mappings" of the specifiers to actual types (showing that the int is optional), a section of which is shown below:

Specifier(s)         Type
-------------    -------------
long long int    long long int
long long        long long int
long int         long int
long             long int

Note the distinction there between the specifier and the type. The specifier is how you tell the compiler what the type is but you can use different specifiers to end up at the same type.

Hence long on its own is neither a type nor a modifier as your question posits, it's simply a specifier for the long int type. Ditto for long long being a specifier for the long long int type.

Although the C++ standard itself doesn't specify the minimum ranges of integral types, it does cite C99, in 1.2 Normative references, as applying. Hence the minimal ranges as set out in C99 5.2.4.2.1 Sizes of integer types <limits.h> are applicable.

In terms of long double, that's actually a floating point value rather than an integer. Similarly to the integral types, it's required to have at least as much precision as a double and to provide a superset of values over that type (meaning at least those values, not necessarily more values).

This is the best for www and for HTTPS, for proxy and no proxy users.

RewriteEngine On

### WWW & HTTPS

# ensure www.
RewriteCond %{HTTP_HOST} !^www\. [NC]
RewriteRule ^ https://www.%{HTTP_HOST}%{REQUEST_URI} [L,R=301]

# ensure https
RewriteCond %{HTTP:X-Forwarded-Proto} !https
RewriteCond %{HTTPS} off
RewriteRule ^ https://%{HTTP_HOST}%{REQUEST_URI} [L,R=301]

### WWW & HTTPS

Just continue the loop when you get None Exception,

example:

   a = None
   if a is None:
       continue
   else:
       print("do something")

This can be any iterable coming from DB or an excel file.

I spent a lot of time trying different answers all around the internet, and I suspect the reasons why one thing works for some people and not for others is due to very small weird differences in application. For context, I needed to read in file names from a csv file that had strange and/or unmappable unicode characters and write them to a new csv file. For what it's worth, here's what worked for me:

s = '\u00e7\u00a3\u0085\u00e5\u008d\u0095' # csv freaks if you try to write this
s = repr(s.encode('utf-8', 'ignore'))[2:-1]

This can have different reasons like:

• You are using an incorrect password
• The MySQL server got an error when trying to resolve the IP address of the client host to a name
• No privileges are granted to the user

You can try one of the following steps:

To reset the password for the remote user by:

SET PASSWORD FOR some_user@ip_addr_of_remote_client=PASSWORD('some_password');

To grant access to the user by:

GRANT SELECT, INSERT, UPDATE, DELETE, LOCK TABLES ON YourDB.* TO user@Host IDENTIFIED by 'password';

Hope this helps you, if not then you will have to go through the documentation

As has been mentioned by others, if you don't assign the result of explode() to a variable, you get the message:

E_STRICT: Strict standards: Only variables should be passed by reference

The correct way is:

$words = explode('-', 'hello-world-123');
$id = array_pop($words); // 123
$slug = implode('-', $words); // hello-world

Don't know if this will be everybody's answer, but after some digging, here's what we came up with.

The error is obviously caused by the fact that the listener was not accepting connections, but why would we get that error when other tests could connect fine (we could also connect no problem through sqlplus)? The key to the issue wasn't that we couldn't connect, but that it was intermittent

After some investigation, we found that there was some static data created during the class setup that would keep open connections for the life of the test class, creating new ones as it went. Now, even though all of the resources were properly released when this class went out of scope (via a finally{} block, of course), there were some cases during the run when this class would swallow up all available connections (okay, bad practice alert - this was unit test code that connected directly rather than using a pool, so the same problem could not happen in production).

The fix was to not make that class static and run in the class setup, but instead use it in the per method setUp and tearDown methods.

So if you get this error in your own apps, slap a profiler on that bad boy and see if you might have a connection leak. Hope that helps.

In .net 4.0 Microsoft removed the ability to add DLLs to the Assembly simply by dragging and dropping.

Instead you need to use gacutil.exe, or create an installer to do it. Microsoft actually doesn’t recommend using gacutil, but I went that route anyway.

To use gacutil on a development machine go to:
Start -> programs -> Microsoft Visual studio 2010 -> Visual Studio Tools -> Visual Studio Command Prompt (2010)

Then use these commands to uninstall and Reinstall respectively. Note I did NOT include .dll in the uninstall command.
gacutil /u myDLL
gacutil /i "C:\Program Files\Custom\myDLL.dll"

To use Gacutil on a non-development machine you will have to copy the executable and config file from your dev machine to the production machine. It looks like there are a few different versions of Gacutil. The one that worked for me, I found here:
C:\Program Files (x86)\Microsoft SDKs\Windows\v7.0A\Bin\NETFX 4.0 Tools\gacutil.exe C:\Program Files (x86)\Microsoft SDKs\Windows\v7.0A\Bin\NETFX 4.0 Tools\gacutil.exe.config

Copy the files here or to the appropriate .net folder;
C:\Windows\Microsoft.NET\Framework\v4.0.30319

Then use these commands to uninstall and reinstall respectively
"C:\Users\BHJeremy\Desktop\Installing to the Gac in .net 4.0\gacutil.exe" /u "myDLL"

"C:\Windows\Microsoft.NET\Framework\v4.0.30319\gacutil.exe" /i "C:\Program Files\Custom\myDLL.dll"

I had very similar issue, removing entire node_modules folder and re-installing worked for me. Learned this trick from the IT Crowd show!

rm -rf node_modules
npm install

Multi-threading with javascript is clearly possible using webworkers bring by HTML5.

Main difference between webworkers and a standard multi-threading environment is memory resources are not shared with the main thread, a reference to an object is not visible from one thread to another. Threads communicate by exchanging messages, it is therefore possible to implement a synchronzization and concurrent method call algorithm following an event-driven design pattern.

Many frameworks exists allowing to structure programmation between threads, among them OODK-JS, an OOP js framework supporting concurrent programming https://github.com/GOMServices/oodk-js-oop-for-js

I have opened a pull request to Please.js that allows generating a color from a hash.

You can map the string to a color like so:

const color = Please.make_color({
    from_hash: "any string goes here"
});

For example, "any string goes here" will return as "#47291b"
and "another!" returns as "#1f0c3d"

You need to use -t or --tail option and you need to define your heroku app name.

heroku logs -t --app app_name

To copy formatting:

Range("F10").Select
Selection.Copy
Range("I10:J10").Select ' note that we select the whole merged cell
Selection.PasteSpecial Paste:=xlPasteFormats

copying the formatting will break the merged cells, so you can use this to put the cell back together

Range("I10:J10").Select
Selection.Merge

To copy a cell value, without copying anything else (and not using copy/paste), you can address the cells directly

Range("I10").Value = Range("F10").Value

other properties (font, color, etc ) can also be copied by addressing the range object properties directly in the same way

I believe the admin button will open the default configuration always. It simply contains a link to localhost/xampp and it doesn't read the server configuration.

If you change the default settings, you know what you changed and you can enter the URL directly in the browser.

Use 4 spaces.

# Unordered list

* Item 1
* Item 2
* Item 3
    * Item 3a
    * Item 3b
    * Item 3c

# Ordered list

1. Step 1
2. Step 2
3. Step 3
    1. Step 3.1
    2. Step 3.2
    3. Step 3.3

# List in list

1. Step 1
2. Step 2
3. Step 3
    * Item 3a
    * Item 3b
    * Item 3c

Here's a screenshot from that updated repo:

Thanks @Waylan, your comment was exactly right.

For passing a single integer I agree with Reed Copsey's answer. If in the future you are going to pass more complicated constucts I personally like to pass all my variables as an Anonymous Type. It will look something like this:

foreach(int id in myIdsToCheck)
{
    Task.Factory.StartNew( (Object obj) => 
        {
           var data = (dynamic)obj;
           CheckFiles(data.id, theBlockingCollection,
               cancelCheckFile.Token, 
               TaskCreationOptions.LongRunning, 
               TaskScheduler.Default);
        }, new { id = id }); // Parameter value
}

You can learn more about it in my blog

I used pdf unite on the linux terminal by leveraging subprocess (assumes one.pdf and two.pdf exist on the directory) and the aim is to merge them to three.pdf

 import subprocess
 subprocess.call(['pdfunite one.pdf two.pdf three.pdf'],shell=True)

for MYSQL try this

INSERT INTO table1(myDatetimeField)VALUES(STR_TO_DATE('12-01-2014 00:00:00','%m-%d-%Y %H:%i:%s');

verification-

select * from table1
output- datetime= 2014-12-01 00:00:00

Do you want to order it?

Select * From temp where mydate > '2009-06-29 04:00:44' ORDER BY mydate;

https://code.visualstudio.com/docs/editor/extension-gallery#_workspace-recommended-extensions

A better way to share extension list is to create workspace-based extension set for your colleagues.

After generating a list of extensions via code --list-extensions | xargs -L 1 echo code --install-extension (check your $PATH contains Visual Studio Code entry C:\Program Files\Microsoft VS Code\bin\ before running code commands), run Extensions: Configure Recommended Extensions (Workspace Folder) Visual Studio Code command (Ctrl + Shift + P) and put extensions into the generated .vscode/extensions.json file:

{
    "recommendations": [
        "eg2.tslint",
        "dbaeumer.vscode-eslint",
        "msjsdiag.debugger-for-chrome"
    ]
}

Try using the \t character in your strings

For anybody still interested:

http://wiki.phonegap.com/w/page/16494815/Preventing-Scrolling-on-iPhone-Phonegap-Applications

From the page:

<meta name="viewport" content="user-scalable=no,width=device-width" />

This instructs Safari to prevent the user from zooming into the page with the "pinch" gesture and fixes the width of the view port to the width of the screen, which ever orientation the iPhone is in.

How about setting it with JavaScript?

var e = document.getElementById('cardNumber');
e.autocomplete = 'off'; // Maybe should be false

It's not perfect, but your HTML will be valid.

In HTML5 there is no scrolling attribute because "its function is better handled by CSS" see http://www.w3.org/TR/html5-diff/ for other changes. Well and the CSS solution:

CSS solution:

HTML4's scrolling="no" is kind of an alias of the CSS's overflow: hidden, to do so it is important to set size attributes width/height:

iframe.noScrolling{
  width: 250px; /*or any other size*/
  height: 300px; /*or any other size*/
  overflow: hidden;
}

Add this class to your iframe and you're done:

<iframe src="http://www.example.com/" class="noScrolling"></iframe>

! IMPORTANT NOTE ! : overflow: hidden for <iframe> is not fully supported by all modern browsers yet(even chrome doesn't support it yet) so for now (2013) it's still better to use Transitional version and use scrolling="no" and overflow:hidden at the same time :)

UPDATE 2020: the above is still true, oveflow for iframes is still not supported by all majors

you have to use double quotes to display special char like \n \t etc... in js alert box for exemple in php script:

$string = 'Hello everybody \n this is an alert box';
echo "<script>alert(\"$string\")</script>";

But a second possible problem arrives when you want to display a string specified in double quoted.

see link text

If the string is enclosed in double-quotes ("), PHP will interpret more escape sequences for special characters

escape sequences \n is transformed as 0x0A ASCII Escaped character and this character is not displayed in the alert box. The solution consists in to escape this special sequence:

$s = "Hello everybody \\n this is an alert box";
echo "<script>alert(\"$string\")</script>";

if you don't know how the string is enclosed you have to transform special characters to their escape sequences

$patterns = array("/\\\\/", '/\n/', '/\r/', '/\t/', '/\v/', '/\f/');
$replacements = array('\\\\\\', '\n', '\r', '\t', '\v', '\f');
$string = preg_replace($patterns, $replacements, $string);
echo "<script>alert(\"$string\")</script>";

Using .getActivity() solves this issue:

For eg.

Intent i= new Intent(MainActivity.this.getActivity(), Next.class);
startActivity(i);

Hope this helps.

Cheers.

In a nutshell, it is your lockscreen.

PIN, pattern, face, password locks or the default lock (slide to unlock), but it is your lock screen.

// similar behavior as an HTTP redirect
window.location.replace("http://stackoverflow.com/SpecificAction.php");

// similar behavior as clicking on a link
window.location.href = "http://stackoverflow.com/SpecificAction.php";

In Swift 4 and latter

    let count = 50//For example
    for i in (1...count).reversed() {
        print(i)
    }

I agree with Jarek, and I furthermore note that the ISO offset separator character is a colon, so I think the final answer should be:

isodate.datetime_isoformat(datetime.datetime.now()) + str.format('{0:+06.2f}', -float(time.timezone) / 3600).replace('.', ':')

This error happens because of your Jre version of Eclipse and Tomcat are mismatched ..either change eclipse one to tomcat one or ViceVersa..

Both should be same ..Java version mismatched ..Check it

What did work for me (inspired from aax' thanks) :

Paste this into /Library/LaunchDaemons/com.apple.launchd.limit.plist then reboot :

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
  <plist version="1.0">
  <dict>
  <key>Label</key>
  <string>eicar</string>
  <key>ProgramArguments</key>
  <array>
    <string>/bin/launchctl</string>
    <string>limit</string>
    <string>maxfiles</string>
    <string>16384</string>
    <string>16384</string>
  </array>
  <key>RunAtLoad</key>
  <true/>
  <key>ServiceIPC</key>
  <false/>
</dict>
</plist>

If you need it step by step :

• Launch terminal
• Type sudo su then enter your password to log in as root
• Type vi /Library/LaunchDaemons/com.apple.launchd.limit.plist
• When into the vi editor, press the key i to enter insert mode then paste the exact code content above (?+v). This will force the limit to 16384 files per process and 16384 files total
• Save your file and quit using esc then :wq
• Reboot your system, and check that it is working using the command launchctl limit

I hope this helped you.

public demo1() {
    initComponents();
    ImageIcon img = new ImageIcon("C:\\Users\\AMIT TIWARI\\Documents\\NetBeansProjects\\try\\src\\com\\dd.jpeg"); //full path of image
    Image img2 = img.getImage().getScaledInstance(mylabel.getWidth(), mylabel.getHeight(),1);
    ImageIcon img3 = new ImageIcon(img2);
    mylabel.setIcon(img3);
}

I fix this problem following this steps:

1. Clean Solution
2. Close Visual Studio
3. Deleting /bin from the project directory
4. Restart Visual Studio
5. Rebuild Solution

Got it. Its using the getApplicationInfo() method of the Context class.

You could implement a showfile function which takes in parameters of the data returned from the WEBApi, and a filename for the file you are trying to download. What I did was create a separate browser service identifies the user's browser and then handles the rendering of the file based on the browser. For instance if the target browser is chrome on an ipad, you have to use javascripts FileReader object.

FileService.showFile = function (data, fileName) {
    var blob = new Blob([data], { type: 'application/pdf' });

    if (BrowserService.isIE()) {
        window.navigator.msSaveOrOpenBlob(blob, fileName);
    }
    else if (BrowserService.isChromeIos()) {
        loadFileBlobFileReader(window, blob, fileName);
    }
    else if (BrowserService.isIOS() || BrowserService.isAndroid()) {
        var url = URL.createObjectURL(blob);
        window.location.href = url;
        window.document.title = fileName;
    } else {
        var url = URL.createObjectURL(blob);
        loadReportBrowser(url, window,fileName);
    }
}


function loadFileBrowser(url, window, fileName) {
    var iframe = window.document.createElement('iframe');
    iframe.src = url
    iframe.width = '100%';
    iframe.height = '100%';
    iframe.style.border = 'none';
    window.document.title = fileName;
    window.document.body.appendChild(iframe)
    window.document.body.style.margin = 0;
}

function loadFileBlobFileReader(window, blob,fileName) {
    var reader = new FileReader();
    reader.onload = function (e) {
        var bdata = btoa(reader.result);
        var datauri = 'data:application/pdf;base64,' + bdata;
        window.location.href = datauri;
        window.document.title = fileName;
    }
    reader.readAsBinaryString(blob);
}

Not all browsers have native JSON support so there will be times where you need to use eval() to the JSON string. Use JSON parser from http://json.org as that handles everything a lot easier for you.

Eval() is an evil but against some browsers its a necessary evil but where you can avoid it, do so!!!!!

"\n" is not working everywhere!

For example in email, it adds the exact "\n" into the text instead of a new line if you use it in the custom keyboard like: textDocumentProxy.insertText("\n")

There are another newLine characters available but I can't just simply paste them here (Because they make a new lines).

using this extension:

extension CharacterSet {
    var allCharacters: [Character] {
        var result: [Character] = []
        for plane: UInt8 in 0...16 where self.hasMember(inPlane: plane) {
            for unicode in UInt32(plane) << 16 ..< UInt32(plane + 1) << 16 {
                if let uniChar = UnicodeScalar(unicode), self.contains(uniChar) {
                    result.append(Character(uniChar))
                }
            }
        }
        return result
    }
}

you can access all characters in any CharacterSet. There is a character set called newlines. Use one of them to fulfill your requirements:

let newlines = CharacterSet.newlines.allCharacters
for newLine in newlines {
    print("Hello World \(newLine) This is a new line")
}

Then store the one you tested and worked everywhere and use it anywhere. Note that you can't relay on the index of the character set. It may change.

But most of the times "\n" just works as expected.

I have tried everything but could not make it work. Finally I have used pyenv and it worked directly like a charm.

So having homebrew installed, juste do:

brew install pyenv
pyenv install 3.6.5

to manage virtualenvs:

brew install pyenv-virtualenv
pyenv virtualenv 3.6.5 env_name

See pyenv and pyenv-virtualenv for more info.

EDIT (2019/03/19)

I have found using the pyenv-installer easier than homebrew to install pyenv and pyenv-virtualenv direclty:

curl https://pyenv.run | bash

To manage python version, either globally:

pyenv global 3.6.5

or locally in a given directory:

pyenv local 3.6.5

If you want to run a few scripts, you can use Set-executionpolicy -ExecutionPolicy Unrestricted and then reset with Set-executionpolicy -ExecutionPolicy Default.

Note that execution policy is only checked when you start its execution (or so it seems) and so you can run jobs in the background and reset the execution policy immediately.

# Check current setting
Get-ExecutionPolicy

# Disable policy
Set-ExecutionPolicy -ExecutionPolicy Unrestricted
# Choose [Y]es

Start-Job { cd c:\working\directory\with\script\ ; ./ping_batch.ps1 example.com | tee ping__example.com.txt }
Start-Job { cd c:\working\directory\with\script\ ; ./ping_batch.ps1 google.com  | tee ping__google.com.txt  }

# Can be run immediately
Set-ExecutionPolicy -ExecutionPolicy Default
# [Y]es

The best way is to simply reset the password by connecting with a domain/local admin (so you may need help from your system administrators), but this only works if SQL Server was set up to allow local admins (these are now left off the default admin group during setup).

If you can't use this or other existing methods to recover / reset the SA password, some of which are explained here:

• Disaster Recovery: What to do when the SA account password is lost in SQL Server 2005
• Is there a way I can retrieve sa password in sql server 2005
• How to recover SA password on Microsoft SQL Server 2008 R2

Then you could always backup your important databases, uninstall SQL Server, and install a fresh instance.

You can also search for less scrupulous ways to do it (e.g. there are password crackers that I am not enthusiastic about sharing).

As an aside, the login properties for sa would never say Windows Authentication. This is by design as this is a SQL Authentication account. This does not mean that Windows Authentication is disabled at the instance level (in fact it is not possible to do so), it just doesn't apply for a SQL auth account.

I wrote a tip on using PSExec to connect to an instance using the NT AUTHORITY\SYSTEM account (which works < SQL Server 2012), and a follow-up that shows how to hack the SqlWriter service (which can work on more modern versions):

• Recover access to a SQL Server instance
• More on Recovering Access to a SQL Server Instance

And some other resources:

• Connect to SQL Server When System Administrators Are Locked Out

• Leveraging Service SIDs to Logon to SQL Server Instances with Sysadmin Privileges

Your code alerts the current value of the dropdown for me, showing that it has properly pushed into the array.

Are you wanting to keep old values and append? You're recreating the array each time, meaning that the old value gets clobbered.

Here's some updated code:

var myarray = [];
$("#test").click(function() {
    myarray.push($("#drop").val());
    alert(myarray);
});

jsFiddle

You can't. The emulator does not support Bluetooth, as mentioned in the SDK's docs and several other places. Android emulator does not have bluetooth capabilities".

You can only use real devices.

Emulator Limitations

The functional limitations of the emulator include:

• No support for placing or receiving actual phone calls. However, You can simulate phone calls (placed and received) through the emulator console
• No support for USB
• No support for device-attached headphones
• No support for determining SD card insert/eject
• No support for WiFi, Bluetooth, NFC

Refer to the documentation

In Java we don't compare string as you are doing above... Here is String comparison...

    if (gender.equalsIgnoreCase("Male")) {
        salutation = "Mr.";
    } else if (gender.equalsIgnoreCase("Female")) {
        salutation = "Ms.";
    }

For others facing a similar problem to mine, where you know a particular object property cannot be null, you can use the non-null assertion operator (!) after the item in question. This was my code:

  const naciStatus = dataToSend.naci?.statusNACI;
  if (typeof naciStatus != "undefined") {
    switch (naciStatus) {
      case "AP":
        dataToSend.naci.certificateStatus = "FALSE";
        break;
      case "AS":
      case "WR":
        dataToSend.naci.certificateStatus = "TRUE";
        break;
      default:
        dataToSend.naci.certificateStatus = "";
    }
  }

And because dataToSend.naci cannot be undefined in the switch statement, the code can be updated to include exclamation marks as follows:

  const naciStatus = dataToSend.naci?.statusNACI;
  if (typeof naciStatus != "undefined") {
    switch (naciStatus) {
      case "AP":
        dataToSend.naci!.certificateStatus = "FALSE";
        break;
      case "AS":
      case "WR":
        dataToSend.naci!.certificateStatus = "TRUE";
        break;
      default:
        dataToSend.naci!.certificateStatus = "";
    }
  }

• Visit phpmyadmin
• Select your database and click on structure
• In front of your table, you can see Empty, click on it to clear all the entries from the selected table.

Or you can do the same using sql query:

Click on SQL present along side Structure

TRUNCATE tablename; //offers better performance, but used only when all entries need to be cleared
or
DELETE FROM tablename; //returns the number of rows deleted

Refer to DELETE and TRUNCATE for detailed documentaion

You're running the code before the DOM is loaded.

Try this:

Live example:

http://jsfiddle.net/FvMYz/

$(function() {    // Makes sure the code contained doesn't run until
                  //     all the DOM elements have loaded

    $('#colorselector').change(function(){
        $('.colors').hide();
        $('#' + $(this).val()).show();
    });

});

If you want not to use dimensions you should use this line

android { 
compileSdkVersion 24

...
flavorDimensions "default"
...
}

but if you want ti use dimensions you should declare your dimension name first and then use this name after THIS example is from the documentations:

android {
...
buildTypes {
debug {...}
release {...}
}

  // Specifies the flavor dimensions you want to use. The order in which you
  // list each dimension determines its priority, from highest to lowest,
  // when Gradle merges variant sources and configurations. You must assign
  // each product flavor you configure to one of the flavor dimensions.
  flavorDimensions "api", "mode"

  productFlavors {
    demo {
  // Assigns this product flavor to the "mode" flavor dimension.
  dimension "mode"
  ...
}

full {
  dimension "mode"
  ...
}

// Configurations in the "api" product flavors override those in "mode"
// flavors and the defaultConfig block. Gradle determines the priority
// between flavor dimensions based on the order in which they appear next
// to the flavorDimensions property above--the first dimension has a higher
// priority than the second, and so on.
minApi24 {
  dimension "api"
  minSdkVersion 24
  // To ensure the target device receives the version of the app with
  // the highest compatible API level, assign version codes in increasing
  // value with API level. To learn more about assigning version codes to
  // support app updates and uploading to Google Play, read Multiple APK Support
  versionCode 30000 + android.defaultConfig.versionCode
  versionNameSuffix "-minApi24"
  ...
}

minApi23 {
  dimension "api"
  minSdkVersion 23
  versionCode 20000  + android.defaultConfig.versionCode
  versionNameSuffix "-minApi23"
  ...
}

minApi21 {
  dimension "api"
  minSdkVersion 21
  versionCode 10000  + android.defaultConfig.versionCode
  versionNameSuffix "-minApi21"
  ...
    }
  }
}
...

As of version 0.23, you can directly return a DataFrame using the as_frame argument. For example, loading the iris data set:

from sklearn.datasets import load_iris
iris = load_iris(as_frame=True)
df = iris.data

In my understanding using the provisionally release notes, this works for the breast_cancer, diabetes, digits, iris, linnerud, wine and california_houses data sets.

Note that there is also a JSON.decycle method implemented by Douglas Crockford. See his cycle.js. This allows you to stringify almost any standard structure:

var a = [];
a[0] = a;
a[1] = 123;
console.log(JSON.stringify(JSON.decycle(a)));
// result: '[{"$ref":"$"},123]'.

You can also recreate original object with retrocycle method. So you don't have to remove cycles from objects to stringify them.

However this will not work for DOM Nodes (which are typical cause of cycles in real life use-cases). For example this will throw:

var a = [document.body];
console.log(JSON.stringify(JSON.decycle(a)));

I've made a fork to solve that problem (see my cycle.js fork). This should work fine:

var a = [document.body];
console.log(JSON.stringify(JSON.decycle(a, true)));

Note that in my fork JSON.decycle(variable) works as in the original and will throw an exception when the variable contain DOM nodes/elements.

When you use JSON.decycle(variable, true) you accept the fact that the result will not be reversible (retrocycle will not re-create DOM nodes). DOM elements should be identifiable to some extent though. For example if a div element has an id then it will be replaced with a string "div#id-of-the-element".

Make sure you are using this org.json: https://mvnrepository.com/artifact/org.json/json

if you are using Java 8 then you can use

import org.json.JSONArray;
import org.json.JSONObject;

JSONArray array = ...;

array.forEach(item -> {
    JSONObject obj = (JSONObject) item;
    parse(obj);
});

Just added a simple test to prove that it works:

Add the following dependency into your pom.xml file (To prove that it works, I have used the old jar which was there when I have posted this answer)

<dependency>
    <groupId>org.json</groupId>
    <artifactId>json</artifactId>
    <version>20160810</version>
</dependency>

And the simple test code snippet will be:

import org.json.JSONArray;
import org.json.JSONObject;

public class Test {
    public static void main(String args[]) {
        JSONArray array = new JSONArray();

        JSONObject object = new JSONObject();
        object.put("key1", "value1");

        array.put(object);

        array.forEach(item -> {
            System.out.println(item.toString());
        });
    }
}

output:

{"key1":"value1"}

Inline styling does not support pseudos or at-rules (e.g., @media). Recommendations range from reimplement CSS features in JavaScript for CSS states like :hover via onMouseEnter and onMouseLeave to using more elements to reproduce pseudo-elements like :after and :before to just use an external stylesheet.

Personally dislike all of those solutions. Reimplementing CSS features via JavaScript does not scale well -- neither does adding superfluous markup.

Imagine a large team wherein each developer is recreating CSS features like :hover. Each developer will do it differently, as teams grow in size, if it can be done, it will be done. Fact is with JavaScript there are about n ways to reimplement CSS features, and over time you can bet on every one of those ways being implemented with the end result being spaghetti code.

So what to do? Use CSS. Granted you asked about inline styling going to assume you're likely in the CSS-in-JS camp (me too!). Have found colocating HTML and CSS to be as valuable as colocating JS and HTML, lots of folks just don't realise it yet (JS-HTML colocation had lots of resistance too at first).

Made a solution in this space called Style It that simply lets your write plaintext CSS in your React components. No need to waste cycles reinventing CSS in JS. Right tool for the right job, here is an example using :after:

npm install style-it --save

Functional Syntax (JSFIDDLE)

import React from 'react';
import Style from 'style-it';

class Intro extends React.Component {
  render() {
    return Style.it(`
      #heart {
        position: relative;
        width: 100px;
        height: 90px;
      }
      #heart:before,
      #heart:after {
        position: absolute;
        content: "";
        left: 50px;
        top: 0;
        width: 50px;
        height: 80px;
        background: red;
        -moz-border-radius: 50px 50px 0 0;
        border-radius: 50px 50px 0 0;
        -webkit-transform: rotate(-45deg);
        -moz-transform: rotate(-45deg);
        -ms-transform: rotate(-45deg);
        -o-transform: rotate(-45deg);
        transform: rotate(-45deg);
        -webkit-transform-origin: 0 100%;
        -moz-transform-origin: 0 100%;
        -ms-transform-origin: 0 100%;
        -o-transform-origin: 0 100%;
        transform-origin: 0 100%;
      }
      #heart:after {
        left: 0;
        -webkit-transform: rotate(45deg);
        -moz-transform: rotate(45deg);
        -ms-transform: rotate(45deg);
        -o-transform: rotate(45deg);
        transform: rotate(45deg);
        -webkit-transform-origin: 100% 100%;
        -moz-transform-origin: 100% 100%;
        -ms-transform-origin: 100% 100%;
        -o-transform-origin: 100% 100%;
        transform-origin :100% 100%;
      }
    `,
      <div id="heart" />
    );
  }
}

export default Intro;

JSX Syntax (JSFIDDLE)

import React from 'react';
import Style from 'style-it';

class Intro extends React.Component {
  render() {
    return (
      <Style>
      {`
        #heart {
          position: relative;
          width: 100px;
          height: 90px;
        }
        #heart:before,
        #heart:after {
          position: absolute;
          content: "";
          left: 50px;
          top: 0;
          width: 50px;
          height: 80px;
          background: red;
          -moz-border-radius: 50px 50px 0 0;
          border-radius: 50px 50px 0 0;
          -webkit-transform: rotate(-45deg);
          -moz-transform: rotate(-45deg);
          -ms-transform: rotate(-45deg);
          -o-transform: rotate(-45deg);
          transform: rotate(-45deg);
          -webkit-transform-origin: 0 100%;
          -moz-transform-origin: 0 100%;
          -ms-transform-origin: 0 100%;
          -o-transform-origin: 0 100%;
          transform-origin: 0 100%;
        }
        #heart:after {
          left: 0;
          -webkit-transform: rotate(45deg);
          -moz-transform: rotate(45deg);
          -ms-transform: rotate(45deg);
          -o-transform: rotate(45deg);
          transform: rotate(45deg);
          -webkit-transform-origin: 100% 100%;
          -moz-transform-origin: 100% 100%;
          -ms-transform-origin: 100% 100%;
          -o-transform-origin: 100% 100%;
          transform-origin :100% 100%;
        }
     `}

      <div id="heart" />
    </Style>
  }
}

export default Intro;

Heart example pulled from CSS-Tricks

There are several issues:

1. Class names (and IDs) are not allowed to start with a digit.
2. You have to pass a class to getElementsByClassName().
3. You have to iterate of the result set.

Example (untested):

<script type="text/javascript">
function hideTd(className){
    var elements = document.getElementsByClassName(className);
    for(var i = 0, length = elements.length; i < length; i++) {
       if( elements[i].textContent == ''){
          elements[i].style.display = 'none';
       } 
    }

  }
</script>
</head>
<body onload="hideTd('td');">
<table border="1">
  <tr>
    <td class="td">not empty</td>
  </tr>
  <tr>
    <td class="td"></td>
  </tr>
  <tr>
    <td class="td"></td>
  </tr>
</table>
</body>

Note that getElementsByClassName() is not available up to and including IE8.

Update:

Alternatively you can give the table an ID and use:

var elements = document.getElementById('tableID').getElementsByTagName('td');

to get all td elements.

To hide the parent row, use the parentNode property of the element:

elements[i].parentNode.style.display = "none";

Alternatively, you can also try:

gsub("\\S+_", "", a)

Pycharm 2020.3.3 CE ZorinOS(Linux) File>Settings > Project Structure > {select the folder} > Mark as Source(blue folder icon) > Apply

To verify:

import sys
print(sys.path)

Selected path should be listed here.

Try this:

dir /s /b /o:n /ad > f.txt

You are "tainting" the canvas by loading from a cross origins domain. Check out this MDN article:

https://developer.mozilla.org/en-US/docs/HTML/CORS_Enabled_Image

I had a similar problem and found that if you remove the size definition, it works for some reason.

Remove:

<size
    android:width="60dp"
    android:height="40dp" />

from the shape.

Let me know if this works!

@Neil's answer is one (perfectly valid!) way of doing it, but you can also simply call matplotlib.use('Agg') before importing matplotlib.pyplot, and then continue as normal.

E.g.

import matplotlib as mpl
mpl.use('Agg')
import matplotlib.pyplot as plt

fig = plt.figure()
ax = fig.add_subplot(111)
ax.plot(range(10))
fig.savefig('temp.png')

You don't have to use the Agg backend, as well. The pdf, ps, svg, agg, cairo, and gdk backends can all be used without an X-server. However, only the Agg backend will be built by default (I think?), so there's a good chance that the other backends may not be enabled on your particular install.

Alternately, you can just set the backend parameter in your .matplotlibrc file to automatically have matplotlib.pyplot use the given renderer.

None of them are "better" than the others. The third is, to me, more readable, but to someone who doesn't use foreaches it might look odd (they might prefer the first). All 3 are pretty clear to anyone who understands Java, so pick whichever makes you feel better about the code.

The first one is the most basic, so it's the most universal pattern (works for arrays, all iterables that I can think of). That's the only difference I can think of. In more complicated cases (e.g. you need to have access to the current index, or you need to filter the list), the first and second cases might make more sense, respectively. For the simple case (iterable object, no special requirements), the third seems the cleanest.

CONTAINS is for a Full Text Indexed field - if not, then use LIKE

Use parse_url() as Pekka said:

<?php
$url = 'http://www.example.com/search.php?arg1=arg2';

$parts = parse_url($url);

$str = $parts['scheme'].'://'.$parts['host'].$parts['path'];

echo $str;
?>

http://codepad.org/NBBf4yTB

In this example the optional username and password aren't output!

Add elements in first arraylist

ArrayList<String> firstArrayList = new ArrayList<String>();

firstArrayList.add("A");
firstArrayList.add("B");
firstArrayList.add("C");
firstArrayList.add("D");
firstArrayList.add("E");

Add elements in second arraylist

ArrayList<String> secondArrayList = new ArrayList<String>();

secondArrayList.add("B");
secondArrayList.add("D");
secondArrayList.add("F");
secondArrayList.add("G");

Add first arraylist's elements in second arraylist

secondArrayList.addAll(firstArrayList);

Assign new combine arraylist and add all elements from both arraylists

ArrayList<String> comboArrayList = new ArrayList<String>(firstArrayList);
comboArrayList.addAll(secondArrayList);

Assign new Set for remove duplicate entries from arraylist

Set<String> setList = new LinkedHashSet<String>(comboArrayList);
comboArrayList.clear();
comboArrayList.addAll(setList);

Sorting arraylist

Collections.sort(comboArrayList);

Output

 A
 B
 C
 D
 E
 F
 G

We use a custom provider for multi language support and put all texts in a database table. It works well except we sometimes face caching problems when updating texts in the database without updating the web application.

I use the following code to capture images:

CvCapture* capture = cvCaptureFromCAM( CV_CAP_ANY );
if(!capture) error((char*)"No Capture");
IplImage *img=cvQueryFrame(capture);

I know this works for sure

If the sites are on separate domains, the calling page can't access the height of the iframe due to cross-browser domain restrictions. If you have access to both sites, you may be able to use the [document domain hack].1 Then anroesti's links should help.

There's no way to specify a StringComparer at the point where you try to get a value. If you think about it, "foo".GetHashCode() and "FOO".GetHashCode() are totally different so there's no reasonable way you could implement a case-insensitive get on a case-sensitive hash map.

You can, however, create a case-insensitive dictionary in the first place using:-

var comparer = StringComparer.OrdinalIgnoreCase;
var caseInsensitiveDictionary = new Dictionary<string, int>(comparer);

Or create a new case-insensitive dictionary with the contents of an existing case-sensitive dictionary (if you're sure there are no case collisions):-

var oldDictionary = ...;
var comparer = StringComparer.OrdinalIgnoreCase;
var newDictionary = new Dictionary<string, int>(oldDictionary, comparer);

This new dictionary then uses the GetHashCode() implementation on StringComparer.OrdinalIgnoreCase so comparer.GetHashCode("foo") and comparer.GetHashcode("FOO") give you the same value.

Alternately, if there are only a few elements in the dictionary, and/or you only need to lookup once or twice, you can treat the original dictionary as an IEnumerable<KeyValuePair<TKey, TValue>> and just iterate over it:-

var myKey = ...;
var myDictionary = ...;
var comparer = StringComparer.OrdinalIgnoreCase;
var value = myDictionary.FirstOrDefault(x => String.Equals(x.Key, myKey, comparer)).Value;

Or if you prefer, without the LINQ:-

var myKey = ...;
var myDictionary = ...;
var comparer = StringComparer.OrdinalIgnoreCase;
int? value;
foreach (var element in myDictionary)
{
  if (String.Equals(element.Key, myKey, comparer))
  {
    value = element.Value;
    break;
  }
}

This saves you the cost of creating a new data structure, but in return the cost of a lookup is O(n) instead of O(1).

Here is a jQuery plugin that does exactly that: http://fixedheadertable.com/

Usage:

$('selector').fixedHeaderTable({ fixedColumn: 1 });

Set the fixedColumn option if you want any number of columns to be also fixed for horizontal scrolling.

EDIT: This example http://www.datatables.net/examples/basic_init/scroll_y.html is much better in my opinion, although with DataTables you'll need to get a better understanding of how it works in general.

EDIT2: For Bootstrap to work with DataTables you need to follow the instructions here: http://datatables.net/blog/Twitter_Bootstrap_2 (I have tested this and it works)- For Bootstrap 3 there's a discussion here: http://datatables.net/forums/discussion/comment/53462 - (I haven't tested this)

You will have to set frame to your image. Untested code is

cell.imageView.frame = CGRectOffset(cell.frame, 10, 10);

$( this ).find( 'li.target' ).css("border", "3px double red");

or

$( this ).children( 'li.target' ).css("border", "3px double red");

Use children for immediate descendants, or find for deeper elements.

The Thread class is available since PECL pthreads = 2.0.0.

maven-compiler-plugin it's already present in plugins hierarchy dependency in pom.xml. Check in Effective POM.

For short you can use properties like this:

<properties>
   <maven.compiler.source>1.8</maven.compiler.source>
   <maven.compiler.target>1.8</maven.compiler.target>
</properties>

I'm using Maven 3.2.5.

No you don't have to put credentials, You have to put headers on client side eg:

 $http({
        url: 'url of service',
        method: "POST",
        data: {test :  name },
        withCredentials: true,
        headers: {
                    'Content-Type': 'application/json; charset=utf-8'
        }
    });

And and on server side you have to put headers to this is example for nodejs:

/**
 * On all requests add headers
 */
app.all('*', function(req, res,next) {


    /**
     * Response settings
     * @type {Object}
     */
    var responseSettings = {
        "AccessControlAllowOrigin": req.headers.origin,
        "AccessControlAllowHeaders": "Content-Type,X-CSRF-Token, X-Requested-With, Accept, Accept-Version, Content-Length, Content-MD5,  Date, X-Api-Version, X-File-Name",
        "AccessControlAllowMethods": "POST, GET, PUT, DELETE, OPTIONS",
        "AccessControlAllowCredentials": true
    };

    /**
     * Headers
     */
    res.header("Access-Control-Allow-Credentials", responseSettings.AccessControlAllowCredentials);
    res.header("Access-Control-Allow-Origin",  responseSettings.AccessControlAllowOrigin);
    res.header("Access-Control-Allow-Headers", (req.headers['access-control-request-headers']) ? req.headers['access-control-request-headers'] : "x-requested-with");
    res.header("Access-Control-Allow-Methods", (req.headers['access-control-request-method']) ? req.headers['access-control-request-method'] : responseSettings.AccessControlAllowMethods);

    if ('OPTIONS' == req.method) {
        res.send(200);
    }
    else {
        next();
    }


});

Installing framework 4.0 redistributable is also enough to create application pool. You can download it from here.

I thought a fully-functioning reCaptcha v3 example demo in PHP, using a Bootstrap 4 form, might be useful to some.

Reference the shown dependencies, swap in your email address and keys (create your own keys here), and the form is ready to test and use. I made code comments to better clarify the logic and also included commented-out console log and print_r lines to quickly enable viewing the validation token and data generated from Google.

The included jQuery function is optional, though it does create a much better user prompt experience in this demo.

PHP file (mail.php):

Add secret key (2 places) and email address where noted.

<?php

if ($_SERVER["REQUEST_METHOD"] == "POST") {

  # BEGIN Setting reCaptcha v3 validation data
  $url = "https://www.google.com/recaptcha/api/siteverify";
  $data = [
    'secret' => "your-secret-key-here",
    'response' => $_POST['token'],
    'remoteip' => $_SERVER['REMOTE_ADDR']
  ];

  $options = array(
    'http' => array(
      'header'  => "Content-type: application/x-www-form-urlencoded\r\n",
      'method'  => 'POST',
      'content' => http_build_query($data)
    )
    );
  
  # Creates and returns stream context with options supplied in options preset 
  $context  = stream_context_create($options);
  # file_get_contents() is the preferred way to read the contents of a file into a string
  $response = file_get_contents($url, false, $context);
  # Takes a JSON encoded string and converts it into a PHP variable
  $res = json_decode($response, true);
  # END setting reCaptcha v3 validation data
   
    // print_r($response); 
# Post form OR output alert and bypass post if false. NOTE: score conditional is optional
# since the successful score default is set at >= 0.5 by Google. Some developers want to
# be able to control score result conditions, so I included that in this example.

  if ($res['success'] == true && $res['score'] >= 0.5) {
 
    # Recipient email
    $mail_to = "[email protected]";
    
    # Sender form data
    $subject = trim($_POST["subject"]);
    $name = str_replace(array("\r","\n"),array(" "," ") , strip_tags(trim($_POST["name"])));
    $email = filter_var(trim($_POST["email"]), FILTER_SANITIZE_EMAIL);
    $phone = trim($_POST["phone"]);
    $message = trim($_POST["message"]);
    
    if (empty($name) OR !filter_var($email, FILTER_VALIDATE_EMAIL) OR empty($phone) OR empty($subject) OR empty($message)) {
      # Set a 400 (bad request) response code and exit
      http_response_code(400);
      echo '<p class="alert-warning">Please complete the form and try again.</p>';
      exit;
    }

    # Mail content
    $content = "Name: $name\n";
    $content .= "Email: $email\n\n";
    $content .= "Phone: $phone\n";
    $content .= "Message:\n$message\n";

    # Email headers
    $headers = "From: $name <$email>";

    # Send the email
    $success = mail($mail_to, $subject, $content, $headers);
    
    if ($success) {
      # Set a 200 (okay) response code
      http_response_code(200);
      echo '<p class="alert alert-success">Thank You! Your message has been successfully sent.</p>';
    } else {
      # Set a 500 (internal server error) response code
      http_response_code(500);
      echo '<p class="alert alert-warning">Something went wrong, your message could not be sent.</p>';
    }   

  } else {

    echo '<div class="alert alert-danger">
        Error! The security token has expired or you are a bot.
       </div>';
  }  

} else {
  # Not a POST request, set a 403 (forbidden) response code
  http_response_code(403);
  echo '<p class="alert-warning">There was a problem with your submission, please try again.</p>';
} ?>

HTML <head>

Bootstrap CSS dependency and reCaptcha client-side validation Place between <head> tags - paste your own site-key where noted.

<link rel="stylesheet" href="https://maxcdn.bootstrapcdn.com/bootstrap/4.0.0/css/bootstrap.min.css">
<script src="https://www.google.com/recaptcha/api.js?render=your-site-key-here"></script>

HTML <body>

Place between <body> tags.

<!-- contact form demo container -->
<section style="margin: 50px 20px;">
  <div style="max-width: 768px; margin: auto;">
    
    <!-- contact form -->
    <div class="card">
      <h2 class="card-header">Contact Form</h2>
      <div class="card-body">
        <form class="contact_form" method="post" action="mail.php">

          <!-- form fields -->
          <div class="row">
            <div class="col-md-6 form-group">
              <input name="name" type="text" class="form-control" placeholder="Name" required>
            </div>
            <div class="col-md-6 form-group">
              <input name="email" type="email" class="form-control" placeholder="Email" required>
            </div>
            <div class="col-md-6 form-group">
              <input name="phone" type="text" class="form-control" placeholder="Phone" required>
            </div>
            <div class="col-md-6 form-group">
              <input name="subject" type="text" class="form-control" placeholder="Subject" required>
            </div>
            <div class="col-12 form-group">
              <textarea name="message" class="form-control" rows="5" placeholder="Message" required></textarea>
            </div>

            <!-- form message prompt -->
            <div class="row">
              <div class="col-12">
                <div class="contact_msg" style="display: none">
                  <p>Your message was sent.</p>
                </div>
              </div>
            </div>

            <div class="col-12">
              <input type="submit" value="Submit Form" class="btn btn-success" name="post">
            </div>

            <!-- hidden reCaptcha token input -->
            <input type="hidden" id="token" name="token">
          </div>

        </form>
      </div>
    </div>

  </div>
</section>
<script>
  grecaptcha.ready(function() {
    grecaptcha.execute('your-site-key-here', {action: 'homepage'}).then(function(token) {
       // console.log(token);
       document.getElementById("token").value = token;
    });
    // refresh token every minute to prevent expiration
    setInterval(function(){
      grecaptcha.execute('your-site-key-here', {action: 'homepage'}).then(function(token) {
        console.log( 'refreshed token:', token );
        document.getElementById("token").value = token;
      });
    }, 60000);

  });
</script>

<!-- References for the optional jQuery function to enhance end-user prompts -->
<script src="https://code.jquery.com/jquery-3.3.1.min.js"></script>
<script src="form.js"></script>

Optional jQuery function for enhanced UX (form.js):

(function ($) {
'use strict';

var form = $('.contact_form'),
  message = $('.contact_msg'),
  form_data;

// Success function
function done_func(response) {
  message.fadeIn()
  message.html(response);
  setTimeout(function () {
    message.fadeOut();
  }, 10000);
  form.find('input:not([type="submit"]), textarea').val('');
}

// fail function
function fail_func(data) {
  message.fadeIn()
  message.html(data.responseText);
  setTimeout(function () {
    message.fadeOut();
  }, 10000);
}

form.submit(function (e) {
  e.preventDefault();
  form_data = $(this).serialize();
  $.ajax({
    type: 'POST',
    url: form.attr('action'),
    data: form_data
  })
  .done(done_func)
  .fail(fail_func);
}); })(jQuery);

Here is yet another explanation of how the factorial calculation using recursion works.

Let's modify source code slightly:

int factorial(int n) {
      if (n <= 1)
            return 1;
      else
            return n * factorial(n - 1);
}

Here is calculation of 3! in details:

Source: RECURSION (Java, C++) | Algorithms and Data Structures

Simple and precise (Source: Socket.IO google group):

socket.emit allows you to emit custom events on the server and client

socket.send sends messages which are received with the 'message' event

value_counts omits NaN by default so you're most likely dealing with "".

So you can just filter them out like

filter = df["Tenant"] != ""
dfNew = df[filter]

std::vector has a constructor that takes two iterators. You can use that:

std::string str = "hello";
std::vector<char> data(str.begin(), str.end());

If you already have a vector and want to add the characters at the end, you need a back inserter:

std::string str = "hello";
std::vector<char> data = /* ... */;
std::copy(str.begin(), str.end(), std::back_inserter(data));

The following works for me when disabling Findbugs in a child POM:

<plugin>
    <groupId>org.codehaus.mojo</groupId>
    <artifactId>findbugs-maven-plugin</artifactId>
    <executions>
        <execution>
            <id>ID_AS_IN_PARENT</id> <!-- id is necessary sometimes -->
            <phase>none</phase>
        </execution>
    </executions>
</plugin>

Note: the full definition of the Findbugs plugin is in our parent/super POM, so it'll inherit the version and so-on.

In Maven 3, you'll need to use:

 <configuration>
      <skip>true</skip>
 </configuration>

for the plugin.

What you're looking for is 'outerHTML', but wee need a fallback coz it's not compatible with old browsers.

var getString = (function() {
  var DIV = document.createElement("div");

  if ('outerHTML' in DIV)
    return function(node) {
      return node.outerHTML;
    };

  return function(node) {
    var div = DIV.cloneNode();
    div.appendChild(node.cloneNode(true));
    return div.innerHTML;
  };

})();

// getString(el) == "<p>Test</p>"

You'll find my jQuery plugin here: Get selected element's outer HTML

First of all, from __future__ import print_function needs to be the first line of code in your script (aside from some exceptions mentioned below). Second of all, as other answers have said, you have to use print as a function now. That's the whole point of from __future__ import print_function; to bring the print function from Python 3 into Python 2.6+.

from __future__ import print_function

import sys, os, time

for x in range(0,10):
    print(x, sep=' ', end='')  # No need for sep here, but okay :)
    time.sleep(1)

__future__ statements need to be near the top of the file because they change fundamental things about the language, and so the compiler needs to know about them from the beginning. From the documentation:

A future statement is recognized and treated specially at compile time: Changes to the semantics of core constructs are often implemented by generating different code. It may even be the case that a new feature introduces new incompatible syntax (such as a new reserved word), in which case the compiler may need to parse the module differently. Such decisions cannot be pushed off until runtime.

The documentation also mentions that the only things that can precede a __future__ statement are the module docstring, comments, blank lines, and other future statements.

Check this out on MSDN. It does not appear that you can do this with the implemented properties in the Socket class.

The poster on MSDN actually solved his problem using threading. He had a main thread which called out to other threads which run the connection code for a couple seconds and then check the Connected property of the socket:

I created another method wich actually connected the socket ... had the main thread sleep for 2 seconds and then check on the connecting method (wich is run in a separate thread) if the socket was connected good otherwise throw an exception "Timed out " and that;s all. Thanks again for the repleies.

What are you trying to do, and why can't it wait for 15-30 seconds before timing out?

json_decode() will return an object or array if second value it's true:

$json = '{"countryId":"84","productId":"1","status":"0","opId":"134"}';
$json = json_decode($json, true);
echo $json['countryId'];
echo $json['productId'];
echo $json['status'];
echo $json['opId'];

grep -rl $oldstring . | xargs sed -i "s/$oldstring/$newstring/g"

Run this command in terminal to remove simulators that can't be accessed from the current version of Xcode in use.

xcrun simctl delete unavailable

Also if you're looking to reclaim simulator related space Michael Tsai found that deleting sim logs saved him 30 GB.

~/Library/Logs/CoreSimulator

In Ubuntu if you execute the script with sh scriptname.sh you get this problem.

Try executing the script with ./scriptname.sh instead.

There is another possibility: You may have an error in your .aspx file that does not allow Visual Studio to regenerate the designer.

If you switch to Design View, it will show the control as unable to be rendered. Fixing the control (in my case it was an extra quote in the properties) and recompiling should regenerate the designer.

Just write docker ps and get the container id and then write the following;

docker exec -i your_container_id mysql -u root -p123456 your_db_name < /Users/your_pc/your_project_folder/backup.sql

Nicolas solution is best. If you want in regex,

try this,

this will validate for, 01/01/1900 through 12/31/2099 Matches invalid dates such as February 31st Accepts dashes, spaces, forward slashes and dots as date separators

(0[1-9]|1[012])[- /.](0[1-9]|[12][0-9]|3[01])[- /.](19|20)[0-9]{2}

After trying all the methods available on internet and my own trial and error tricks 100 times. Finally I was able to solve it. – Apeksha Sahu 6 mins ago
Goto iTunes in Mac --> accounts-->Authorize this computer – Apeksha Sahu 5 mins ago
second step.... Goto developer in settings in iPad and iPhone and reindex with identifiers and clear trust computers everything. It worked for me........ ....... After reinstalling Mac OSHigh seria 10.13.15 version from Mac OS seirra beta latest version, to reinstalling Xcode latest version, after updating all certificates. etc etc etc... as many methods as you can think I did. –

Tooltip plugin might be too heavyweight for what you need. Simply set the 'title' attribute with the text you desire to show in your tooltip.

$("#yourElement").attr('title', 'This is the hover-over text');

If you want to lock the main view of your app to portrait, but want to open popup views in landscape, and you are using tabBarController as rootViewController as I am, you can use this code on your AppDelegate.

AppDelegate.h

@interface AppDelegate : UIResponder <UIApplicationDelegate, UITabBarControllerDelegate>

@property (strong, nonatomic) UIWindow *window;
@property (strong, nonatomic) UITabBarController *tabBarController;

@end

AppDelegate.m

- (BOOL)application:(UIApplication *)application didFinishLaunchingWithOptions:(NSDictionary *)launchOptions
{
    self.window = [[UIWindow alloc] initWithFrame:[[UIScreen mainScreen] bounds]];

    // Create a tab bar and set it as root view for the application
    self.tabBarController = [[UITabBarController alloc] init];
    self.tabBarController.delegate = self;
    self.window.rootViewController = self.tabBarController;

    ...
}

- (NSUInteger)tabBarControllerSupportedInterfaceOrientations:(UITabBarController *)tabBarController
{
    return UIInterfaceOrientationMaskPortrait;
}

- (UIInterfaceOrientation)tabBarControllerPreferredInterfaceOrientationForPresentation:(UITabBarController *)tabBarController
{
    return UIInterfaceOrientationPortrait;
}

It works very well.

In your viewController you want to be presented in landscape, you simply use the following:

- (NSUInteger)supportedInterfaceOrientations {
    return UIInterfaceOrientationMaskLandscape;
}

- (BOOL)shouldAutorotate {
    return YES;
}

This answers a different question:

If trying to figure out if an OBJECT (not class) has a property,

OBJECT.GetType().GetProperty("PROPERTY") != null

returns true if (but not only if) the property exists.

In my case, I was in an ASP.NET MVC Partial View and wanted to render something if either the property did not exist, or the property (boolean) was true.

@if ((Model.GetType().GetProperty("AddTimeoffBlackouts") == null) ||
        Model.AddTimeoffBlackouts)

helped me here.

Edit: Nowadays, it's probably smart to use the nameof operator instead of the stringified property name.

Set your compileSdkVersion to 23 in your module's build.gradle file.

If you do "git status" while having a merge conflict, the first thing git shows you is how to abort the merge.

I would mention one more thing that concerns Primefaces's p:commandButton!

When you use a p:commandButton for the action that needs to be done on the server, you can not use type="button" because that is for Push buttons which are used to execute custom javascript without causing an ajax/non-ajax request to the server.

For this purpose, you can dispense the type attribute (default value is "submit") or you can explicitly use type="submit".

Hope this will help someone!

Because you did not post the csrfmiddlewaretoken, so Django forbid you. this document can help you.

This is the answer:

numCols = objSheet.UsedRange.Columns.count

Documentation of the UsedRange property

This is a common function of Adorners in WPF. Adorners typically appear above all other controls, but the other answers that mention z-order may fit your case better.

#include <iostream>
using namespace std;

int main() {

    enum level {EASY = 1, NORMAL, HARD};

    // Present menu
    int choice;
    cout << "Choose your level:\n\n";
    cout << "1 - Easy.\n";
    cout << "2 - Normal.\n";
    cout << "3 - Hard.\n\n";
    cout << "Choice --> ";
    cin >> choice;
    cout << endl;

    switch (choice) {
    case EASY:
        cout << "You chose Easy.\n";
        break;
    case NORMAL:
        cout << "You chose Normal.\n";
        break;
    case HARD:
        cout << "You chose Hard.\n";
        break;
    default:
        cout << "Invalid choice.\n";
    }

    return 0;
}

Basically when you hit 'return' on a function the function will stop and will not continue your iteration, so what you need to do is put it all on a list and then add it as a children of a widget

you can do something like this:

  Widget getTextWidgets(List<String> strings)
  {
    List<Widget> list = new List<Widget>();
    for(var i = 0; i < strings.length; i++){
        list.add(new Text(strings[i]));
    }
    return new Row(children: list);
  }

or even better, you can use .map() operator and do something like this:

  Widget getTextWidgets(List<String> strings)
  {
    return new Row(children: strings.map((item) => new Text(item)).toList());
  }

services.AddAutoMapper(); didn't work for me. (I am using Asp.Net Core 2.0)

After configuring as below

   var config = new AutoMapper.MapperConfiguration(cfg =>
   {                 
       cfg.CreateMap<ClientCustomer, Models.Customer>();
   });

initialize the mapper IMapper mapper = config.CreateMapper();

and add the mapper object to services as a singleton services.AddSingleton(mapper);

this way I am able to add a DI to controller

  private IMapper autoMapper = null;

  public VerifyController(IMapper mapper)
  {              
   autoMapper = mapper;  
  }

and I have used as below in my action methods

  ClientCustomer customerObj = autoMapper.Map<ClientCustomer>(customer);

Add the image to Your project by clicking File -> "Add Files to ...".

Then choose the image in ImageView properties (Utilities -> Attributes Inspector).

I wanted to update slider as well as the inputbox. For me following is working

a.slider('value',1520);
$("#labelAID").val(1520);

where a is object as following.

 var a= $( "<div id='slider' style='width:200px;margin-left:20px;'></div>" ).insertAfter( "#labelAID" ).slider({
            min: 0,
            max: 2000,
            range: "min",
            value: 111,
            slide: function( event, ui ) {

                $("#labelAID").val(ui.value    );
            }
        });

        $( "#labelAID" ).keyup(function() {
            a.slider( "value",$( "#labelAID" ).val()  );
        });

This has saved my life: https://medium.com/@CarrieGuss/how-to-recover-from-a-git-hard-reset-b830b5e3f60c

Basically you need to run:

for blob in $(git fsck --lost-found | awk ‘$2 == “blob” { print $3 }’); do git cat-file -p $blob > $blob.txt; done

Then manually going through the pain to re-organise your files to the correct structure.

Takeaway: Never use git reset --hard if you dont completely 100% understand how it works, best not to use it.

iPad Media Queries (All generations - including iPad mini)

Thanks to Apple's work in creating a consistent experience for users, and easy time for developers, all 5 different iPads (iPads 1-5 and iPad mini) can be targeted with just one CSS media query. The next few lines of code should work perfect for a responsive design.

iPad in portrait & landscape

@media only screen 
and (min-device-width : 768px) 
and (max-device-width : 1024px)  { /* STYLES GO HERE */}

iPad in landscape

@media only screen 
and (min-device-width : 768px) 
and (max-device-width : 1024px) 
and (orientation : landscape) { /* STYLES GO HERE */}

iPad in portrait

@media only screen 
and (min-device-width : 768px) 
and (max-device-width : 1024px) 
and (orientation : portrait) { /* STYLES GO HERE */ }

iPad 3 & 4 Media Queries

If you're looking to target only 3rd and 4th generation Retina iPads (or tablets with similar resolution) to add @2x graphics, or other features for the tablet's Retina display, use the following media queries.

Retina iPad in portrait & landscape

@media only screen 
and (min-device-width : 768px) 
and (max-device-width : 1024px)
and (-webkit-min-device-pixel-ratio: 2) { /* STYLES GO HERE */}

Retina iPad in landscape

@media only screen 
and (min-device-width : 768px) 
and (max-device-width : 1024px) 
and (orientation : landscape)
and (-webkit-min-device-pixel-ratio: 2) { /* STYLES GO HERE */}

Retina iPad in portrait

@media only screen 
and (min-device-width : 768px) 
and (max-device-width : 1024px) 
and (orientation : portrait)
and (-webkit-min-device-pixel-ratio: 2) { /* STYLES GO HERE */ }

iPad 1 & 2 Media Queries

If you're looking to supply different graphics or choose different typography for the lower resolution iPad display, the media queries below will work like a charm in your responsive design!

iPad 1 & 2 in portrait & landscape

@media only screen 
and (min-device-width : 768px) 
and (max-device-width : 1024px) 
and (-webkit-min-device-pixel-ratio: 1){ /* STYLES GO HERE */}

iPad 1 & 2 in landscape

@media only screen 
and (min-device-width : 768px) 
and (max-device-width : 1024px) 
and (orientation : landscape)
and (-webkit-min-device-pixel-ratio: 1)  { /* STYLES GO HERE */}

iPad 1 & 2 in portrait

@media only screen 
and (min-device-width : 768px) 
and (max-device-width : 1024px) 
and (orientation : portrait) 
and (-webkit-min-device-pixel-ratio: 1) { /* STYLES GO HERE */ }

Source: http://stephen.io/mediaqueries/

See http://ruby-doc.org/core/classes/Range.html#M000695 for the full API.

Basically you use the step() method. For example:

(10..100).step(10) do |n|
    # n = 10
    # n = 20
    # n = 30
    # ...
end

git remote add coworker git://path/to/coworkers/repo.git
git fetch coworker
git checkout --track coworker/foo

This will setup a local branch foo, tracking the remote branch coworker/foo. So when your co-worker has made some changes, you can easily pull them:

git checkout foo
git pull

Response to comments:

Cool :) And if I'd like to make my own changes to that branch, should I create a second local branch "bar" from "foo" and work there instead of directly on my "foo"?

You don't need to create a new branch, even though I recommend it. You might as well commit directly to foo and have your co-worker pull your branch. But that branch already exists and your branch foo need to be setup as an upstream branch to it:

git branch --set-upstream foo colin/foo

assuming colin is your repository (a remote to your co-workers repository) defined in similar way:

git remote add colin git://path/to/colins/repo.git

Change database charset and collation

ALTER DATABASE
    database_name
    CHARACTER SET = utf8mb4
    COLLATE = utf8mb4_unicode_ci;

change specific table's charset and collation

ALTER TABLE
    table_name
    CONVERT TO CHARACTER SET utf8mb4
    COLLATE utf8mb4_unicode_ci;

change connection charset in mysql driver

before

charset=utf8&parseTime=True&loc=Local

after

charset=utf8mb4&collation=utf8mb4_unicode_ci&parseTime=True&loc=Local

From this article https://hackernoon.com/today-i-learned-storing-emoji-to-mysql-with-golang-204a093454b7

Answered by myself.

CORS angular js + restEasy on POST

Well finally I came to this workaround: The reason it worked with IE is because IE sends directly a POST instead of first a preflight request to ask for permission. But I still don't know why the filter wasn't able to manage an OPTIONS request and sends by default headers that aren't described in the filter (seems like an override for that only case ... maybe a restEasy thing ...)

So I created an OPTIONS path in my rest service that rewrites the reponse and includes the headers in the response using response header

I'm still looking for the clean way to do it if anybody faced this before.

If you are running IIS 8 with windows server 2012 you need to do the following:

1. Click Server Manager
2. Add roles and features
3. Click next and then Role-based
4. Select your server
5. In the tree choose Web Server(IIS) >> Web Server >> Application Development >> ASP
6. Next and finish

from then on your application should start running

The JPanel is actually only a container where you can put different elements in it (even other JPanels). So in your case I would suggest one big JPanel as some sort of main container for your window. That main panel you assign a Layout that suits your needs ( here is an introduction to the layouts).

After you set the layout to your main panel you can add the paint panel and the other JPanels you want (like those with the text in it..).

  JPanel mainPanel = new JPanel();
  mainPanel.setLayout(new BoxLayout(mainPanel, BoxLayout.Y_AXIS));

  JPanel paintPanel = new JPanel();
  JPanel textPanel = new JPanel();

  mainPanel.add(paintPanel);
  mainPanel.add(textPanel);

This is just an example that sorts all sub panels vertically (Y-Axis). So if you want some other stuff at the bottom of your mainPanel (maybe some icons or buttons) that should be organized with another layout (like a horizontal layout), just create again a new JPanel as a container for all the other stuff and set setLayout(new BoxLayout(mainPanel, BoxLayout.X_AXIS).

As you will find out, the layouts are quite rigid and it may be difficult to find the best layout for your panels. So don't give up, read the introduction (the link above) and look at the pictures – this is how I do it :)

Or you can just use NetBeans to write your program. There you have a pretty easy visual editor (drag and drop) to create all sorts of Windows and Frames. (only understanding the code afterwards is ... tricky sometimes.)

EDIT

Since there are some many people interested in this question, I wanted to provide a complete example of how to layout a JFrame to make it look like OP wants it to.

The class is called MyFrame and extends swings JFrame

public class MyFrame extends javax.swing.JFrame{

    // these are the components we need.
    private final JSplitPane splitPane;  // split the window in top and bottom
    private final JPanel topPanel;       // container panel for the top
    private final JPanel bottomPanel;    // container panel for the bottom
    private final JScrollPane scrollPane; // makes the text scrollable
    private final JTextArea textArea;     // the text
    private final JPanel inputPanel;      // under the text a container for all the input elements
    private final JTextField textField;   // a textField for the text the user inputs
    private final JButton button;         // and a "send" button

    public MyFrame(){

        // first, lets create the containers:
        // the splitPane devides the window in two components (here: top and bottom)
        // users can then move the devider and decide how much of the top component
        // and how much of the bottom component they want to see.
        splitPane = new JSplitPane();

        topPanel = new JPanel();         // our top component
        bottomPanel = new JPanel();      // our bottom component

        // in our bottom panel we want the text area and the input components
        scrollPane = new JScrollPane();  // this scrollPane is used to make the text area scrollable
        textArea = new JTextArea();      // this text area will be put inside the scrollPane

        // the input components will be put in a separate panel
        inputPanel = new JPanel();
        textField = new JTextField();    // first the input field where the user can type his text
        button = new JButton("send");    // and a button at the right, to send the text

        // now lets define the default size of our window and its layout:
        setPreferredSize(new Dimension(400, 400));     // let's open the window with a default size of 400x400 pixels
        // the contentPane is the container that holds all our components
        getContentPane().setLayout(new GridLayout());  // the default GridLayout is like a grid with 1 column and 1 row,
        // we only add one element to the window itself
        getContentPane().add(splitPane);               // due to the GridLayout, our splitPane will now fill the whole window

        // let's configure our splitPane:
        splitPane.setOrientation(JSplitPane.VERTICAL_SPLIT);  // we want it to split the window verticaly
        splitPane.setDividerLocation(200);                    // the initial position of the divider is 200 (our window is 400 pixels high)
        splitPane.setTopComponent(topPanel);                  // at the top we want our "topPanel"
        splitPane.setBottomComponent(bottomPanel);            // and at the bottom we want our "bottomPanel"

        // our topPanel doesn't need anymore for this example. Whatever you want it to contain, you can add it here
        bottomPanel.setLayout(new BoxLayout(bottomPanel, BoxLayout.Y_AXIS)); // BoxLayout.Y_AXIS will arrange the content vertically

        bottomPanel.add(scrollPane);                // first we add the scrollPane to the bottomPanel, so it is at the top
        scrollPane.setViewportView(textArea);       // the scrollPane should make the textArea scrollable, so we define the viewport
        bottomPanel.add(inputPanel);                // then we add the inputPanel to the bottomPanel, so it under the scrollPane / textArea

        // let's set the maximum size of the inputPanel, so it doesn't get too big when the user resizes the window
        inputPanel.setMaximumSize(new Dimension(Integer.MAX_VALUE, 75));     // we set the max height to 75 and the max width to (almost) unlimited
        inputPanel.setLayout(new BoxLayout(inputPanel, BoxLayout.X_AXIS));   // X_Axis will arrange the content horizontally

        inputPanel.add(textField);        // left will be the textField
        inputPanel.add(button);           // and right the "send" button

        pack();   // calling pack() at the end, will ensure that every layout and size we just defined gets applied before the stuff becomes visible
    }

    public static void main(String args[]){
        EventQueue.invokeLater(new Runnable(){
            @Override
            public void run(){
                new MyFrame().setVisible(true);
            }
        });
    }
}

Please be aware that this is only an example and there are multiple approaches to layout a window. It all depends on your needs and if you want the content to be resizable / responsive. Another really good approach would be the GridBagLayout which can handle quite complex layouting, but which is also quite complex to learn.

curl's --data will by default send Content-Type: application/x-www-form-urlencoded in the request header. However, when using Postman's raw body mode, Postman sends Content-Type: text/plain in the request header.

So to achieve the same thing as Postman, specify -H "Content-Type: text/plain" for curl:

curl -X POST -H "Content-Type: text/plain" --data "this is raw data" http://78.41.xx.xx:7778/

Note that if you want to watch the full request sent by Postman, you can enable debugging for packed app. Check this link for all instructions. Then you can inspect the app (right-click in Postman) and view all requests sent from Postman in the network tab :

Install alone didn't work for me.

mvn deploy:deploy-file -Durl=file:///home/me/project/lib/ \
  -Dfile=target/jzmq-2.1.3-SNAPSHOT.jar -DgroupId=org.zeromq \  
  -DartifactId=zeromq -Dpackaging=jar -Dversion=2.1.3

FAST way!

styles.xml

<style name="popupTheme" parent="Theme.AppCompat.Light">

    <item name="android:background">@color/colorBackground</item>
    <item name="android:textColor">@color/colorItem</item>

</style>

Then add this specific styles to your AppTheme styles

<style name="AppTheme" parent="Theme.AppCompat.Light.NoActionBar">
    ...
    <item name="popupTheme">@style/popupTheme</item>
</style>

DONE!

//You can do it with json.MarshalIndent(data, "", "  ")

package main

import(
  "fmt"
  "encoding/json" //Import package
)

//Create struct
type Users struct {
    ID   int
    NAME string
}

//Asign struct
var user []Users
func main() {
 //Append data to variable user
 user = append(user, Users{1, "Saturn Rings"})
 //Use json package the blank spaces are for the indent
 data, _ := json.MarshalIndent(user, "", "  ")
 //Print json formatted
 fmt.Println(string(data))
}

The easiest way to block these temporarily for testing purposes is to open up the inspect page in chrome by right-clicking anywhere on the page and clicking inspect or by pressing Ctrl+Shift+j and then going to the networking tab and then reloading the page which will send all the requests your page is supposed to make including that annoying favicon.ico. You can now simply right click the favicon.ico request and click "Block request URL".

All of the above answers are for devs who control the app source code. If you are a sysadmin, who's figuring our load-balancer or proxying configuration and is annoyed by this favicon.ico shenanigans, this simple trick does a better job. This answer is for Chrome, but I think there should be a similar alternative which you would figure out for Firefox/Opera/Tor/any other browser :)

It's entirely dependent upon the actual function and the meaning of the multiple values, and their sizes:

• If they're related as in your fraction example, then I'd go with a struct or class instance.
• If they're not really related and can't be grouped into a class/struct then perhaps you should refactor your method into two.
• Depending upon the in-memory size of the values you're returning, you may want to return a pointer to a class instance or struct, or use reference parameters.

More a comment than an answer - but I cannot add comments yet: Thanks for your help, the count was the easy part. Just for others that might come here. I hope that it will save you some time.

It took me a while to get the attributes from the rows and to understand how to access them from the data() Object (that the data() is an Array and the Attributes can be read by adding them with a dot and not with brackets:

$('#button').click( function () {
    for (var i = 0; i < table.rows('.selected').data().length; i++) { 
       console.log( table.rows('.selected').data()[i].attributeNameFromYourself);
    }
} );

(by the way: I get the data for my table using AJAX and JSON)

int randomWithRange(int min, int max)
{
   int range = (max - min) + 1;     
   return (int)(Math.random() * range) + min;
}

Output of randomWithRange(2, 5) 10 times:

5
2
3
3
2
4
4
4
5
4

The bounds are inclusive, ie [2,5], and min must be less than max in the above example.

EDIT: If someone was going to try and be stupid and reverse min and max, you could change the code to:

int randomWithRange(int min, int max)
{
   int range = Math.abs(max - min) + 1;     
   return (int)(Math.random() * range) + (min <= max ? min : max);
}

EDIT2: For your question about doubles, it's just:

double randomWithRange(double min, double max)
{
   double range = (max - min);     
   return (Math.random() * range) + min;
}

And again if you want to idiot-proof it it's just:

double randomWithRange(double min, double max)
{
   double range = Math.abs(max - min);     
   return (Math.random() * range) + (min <= max ? min : max);
}

Maybe you did not start your Mysql and Apache Server. After I started Apache server and Mysql from XAMPP Control Panel, connection was successfully established.

Good luck!

You've got the syntax all wrong:

cursor.execute ("""
   UPDATE tblTableName
   SET Year=%s, Month=%s, Day=%s, Hour=%s, Minute=%s
   WHERE Server=%s
""", (Year, Month, Day, Hour, Minute, ServerID))

For more, read the documentation.

I reviewed all the answers and all are keeping fixed width and adjust only height. If you wish to adjust also width you can very easily use this method:

so when configuring your text view, set scroll disabled

textView.isScrollEnabled = false

and then in delegate method func textViewDidChange(_ textView: UITextView) add this code:

func textViewDidChange(_ textView: UITextView) {
    let newSize = textView.sizeThatFits(CGSize(width: CGFloat.greatestFiniteMagnitude, height: CGFloat.greatestFiniteMagnitude))
    textView.frame = CGRect(origin: textView.frame.origin, size: newSize)
}

Outputs:

Now that's the thing about software development, there's no consistent knowledge about anything, everybody seems to have it their own way, but that's because it is a relatively young discipline anyway.

Here's my plain simple way,

trunk - The trunk directory contains the most current, approved, and merged body of work. Contrary to what many have confessed, my trunk is only for clean, neat, approved work, and not a development area, but rather a release area.

At some given point in time when the trunk seems all ready to release, then it is tagged and released.

branches - The branches directory contains experiments and ongoing work. Work under a branch stays there until is approved to be merged into the trunk. For me, this is the area where all the work is done.

For example: I can have an iteration-5 branch for a fifth round of development on the product, maybe a prototype-9 branch for a ninth round of experimenting, and so on.

tags - The tags directory contains snapshots of approved branches and trunk releases. Whenever a branch is approved to merge into the trunk, or a release is made of the trunk, a snapshot of the approved branch or trunk release is made under tags.

I suppose with tags I can jump back and forth through time to points interest quite easily.

You can set a primary key on a text column. In phpMyAdmin, display the Structure of your table, click on Indexes, then ask to create the index on one column. Then choose PRIMARY, pick your TEXT column, but you have to put a length big enough so that its unique.

Personally, I don't use gomock (or any mocking framework for that matter; mocking in Go is very easy without it). I would either pass a dependency to the downloader() function as a parameter, or I would make downloader() a method on a type, and the type can hold the get_page dependency:

Method 1: Pass get_page() as a parameter of downloader()

type PageGetter func(url string) string

func downloader(pageGetterFunc PageGetter) {
    // ...
    content := pageGetterFunc(BASE_URL)
    // ...
}

Main:

func get_page(url string) string { /* ... */ }

func main() {
    downloader(get_page)
}

Test:

func mock_get_page(url string) string {
    // mock your 'get_page()' function here
}

func TestDownloader(t *testing.T) {
    downloader(mock_get_page)
}

Method2: Make download() a method of a type Downloader:

If you don't want to pass the dependency as a parameter, you could also make get_page() a member of a type, and make download() a method of that type, which can then use get_page:

type PageGetter func(url string) string

type Downloader struct {
    get_page PageGetter
}

func NewDownloader(pg PageGetter) *Downloader {
    return &Downloader{get_page: pg}
}

func (d *Downloader) download() {
    //...
    content := d.get_page(BASE_URL)
    //...
}

Main:

func get_page(url string) string { /* ... */ }

func main() {
    d := NewDownloader(get_page)
    d.download()
}

Test:

func mock_get_page(url string) string {
    // mock your 'get_page()' function here
}

func TestDownloader() {
    d := NewDownloader(mock_get_page)
    d.download()
}

Try this

Installing with Anaconda

conda create --name tensorflow python=3.5
activate tensorflow
conda install jupyter
conda install scipy
pip install tensorflow
or
pip install tensorflow-gpu

It is important to add python=3.5 at the end of the first line, because it will install Python 3.5.

A Float represents double in SQL server. You can find a proof from the coding in C# in visual studio. Here I have declared Overtime as a Float in SQL server and in C#. Thus I am able to convert

int diff=4;
attendance.OverTime = Convert.ToDouble(diff);

Here OverTime is declared float type

All the setting are stored in .metadata file in your workspace delete this and you are good to go

Another solution is:

>>> "".join(list(hex(255))[2:])
'ff'

Probably an archaic answer, but functional.

This worked for me:

server {
  listen  80; 
  server_name example.com www.example.com;

  location / { 
    proxy_pass                          http://127.0.0.1:8080/;
    proxy_set_header Host               $host;
    proxy_set_header X-Real-IP          $remote_addr;  
    proxy_set_header X-Forwarded-For    $proxy_add_x_forwarded_for;
  }
}

If it does not work for you look at the logs at sudo tail -f /var/log/nginx/error.log

You don't actually need the bundle as the ADT can be used with just any latest Eclipse IDE.

2. Download latest eclipse.

3. Download latest ADT plugin ADT-XX.X.X.zip. As of this answer the current version is ADT-23.0.7.zip (More versions at http://developer.android.com/tools/sdk/eclipse-adt.html)

4. Open Eclipse and follow the following steps:

   • Open Help > Install New Software > Add > Archive
   • Navigate to where you downloaded your ADT plugin and select it.
   • Check Developer Tools, click Next, accept any licenses and Finish

5. After restarting Eclipse, if you are not able to open a layout file go to step 4 but instead of selecting archive add https://dl-ssl.google.com/android/eclipse/ in the Location: textbox. Press Ok, update the ADT and restart Eclipse. Close and reopen the layout files and you'll be good to go.

6. Run the Android SDK Manager to update its components.

https://developer.android.com/studio/tools/sdk/eclipse-adt.html

For i = 2 To 24
  Level = Cells(i, 4)
  Return = Cells(i, 5)

  If Return = 0 And Level = 0 Then GoTo NextIteration
  'Go to the next iteration
  Else
  End If
  ' This is how you make a line label in VBA - Do not use keyword or
  ' integer and end it in colon
  NextIteration:
Next

In the initialization chunk I define a function

pagebreak <- function() {
  if(knitr::is_latex_output())
    return("\\newpage")
  else
    return('<div style="page-break-before: always;" />')
}

In the markdown part where I want to insert a page break, I type

`r pagebreak()`

You can try adding action="#{yourBean.function1}" on each button (changing of course the method function2, function3, or whatever you need). If that does not work, you can try the same with the onclick event.

Anyway, it would be easier to help you if you tell us what kind of buttons are you trying to use, a4j:commandButton or whatever you are using.

Like this:

{{ data.title | slice:0:20 }}

And if you want the ellipsis, here's a workaround

{{ data.title | slice:0:20 }}...

Check your .bash_profile, .zshrc, or .profile file. You most likely had a problem during the installation.

You should have the following at the end of one of those files.

[[ -s $HOME/.nvm/nvm.sh ]] && . $HOME/.nvm/nvm.sh  # This loads NVM

The . $HOME/.nvm/nvm.sh is the same as source $HOME/.nvm/nvm.sh

See: Sourcing a File

You can also check to see if you have a .nvm folder.

ls -a | grep .nvm

If you're missing that folder then the installation failed to run the git command. This could be due to being behind a proxy. Try running the following instead.

git clone http://github.com/creationix/nvm.git .nvm

Heroku is like subset of AWS. It is just platform as a service, while AWS can be implemented as anything and at any level.

The implementation depends on what the business requirement. If it fits in either, use accordingly.

Don't use more commands than necessary, leave away tail, grep and cut. You can do this with only (a simple) awk

PS: giving a block-size en print only de persentage is a bit silly ;-) So leave also away the "-B MB"

df . |awk -F'[multiple field seperators]' '$NF=="Last field must be exactly --> mounted patition" {print $(NF-number from last field)}'

in your case, use:

df . |awk -F'[ %]' '$NF=="/" {print $(NF-2)}'

output: 81

If you want to show the percent symbol, you can leave the -F'[ %]' away and your print field will move 1 field further back

df . |awk '$NF=="/" {print $(NF-1)}'

output: 81%

Use something like the following on the server side:

http.createServer(function (request, response) {
    if (request.headers['x-requested-with'] == 'XMLHttpRequest') {
        // handle async request
        var u = url.parse(request.url, true); //not needed

        response.writeHead(200, {'content-type':'text/json'})
        response.end(JSON.stringify(some_array.slice(1, 10))) //send elements 1 to 10
    } else {
        // handle sync request (by server index.html)
        if (request.url == '/') {
            response.writeHead(200, {'content-type': 'text/html'})
            util.pump(fs.createReadStream('index.html'), response)
        } 
        else 
        {
            // 404 error
        }
    }
}).listen(31337)

From React's documentation:

setState() does not immediately mutate this.state but creates a pending state transition. Accessing this.state after calling this method can potentially return the existing value. There is no guarantee of synchronous operation of calls to setState and calls may be batched for performance gains.

If you want a function to be executed after the state change occurs, pass it in as a callback.

this.setState({value: event.target.value}, function () {
    console.log(this.state.value);
});

This is still relevant in 2018.

To String

import strings
stringFiles := strings.Join(fileSlice[:], ",")

Back to Slice again

import strings
fileSlice := strings.Split(stringFiles, ",")

df.loc[df['A'] == df['B'], 'C'] = 0
df.loc[df['A'] > df['B'], 'C'] = 1
df.loc[df['A'] < df['B'], 'C'] = -1

Easy to solve using indexing. The first line of code reads like so, if column A is equal to column B then create and set column C equal to 0.

You can simply set xhr.responseType = 'json';

const xhr = new XMLHttpRequest();_x000D_
xhr.open('GET', 'https://jsonplaceholder.typicode.com/posts/1');_x000D_
xhr.responseType = 'json';_x000D_
xhr.onload = function(e) {_x000D_
  if (this.status == 200) {_x000D_
    console.log('response', this.response); // JSON response  _x000D_
  }_x000D_
};_x000D_
xhr.send();_x000D_
  

Documentation for responseType

"most convenient block of data" probably refers to the width (in bits) of the WORD, in correspondance to the system bus width, or whatever underlying "bandwidth" is available. On a 16 bit system, with WORD being defined as 16 bits wide, moving data around in chunks the size of a WORD will be the most efficient way. (On hardware or "system" level.)

With Java being more or less platform independant, it just defines a "WORD" as the next size from a "BYTE", meaning "full bandwidth". I guess any platform that's able to run Java will use 32 bits for a WORD.

This answer discusses how to make it work inside a framework, and with Cocoapods and Carthage

modulemap approach

I use modulemap in my wrapper around CommonCrypto https://github.com/onmyway133/arcane, https://github.com/onmyway133/Reindeer

For those getting header not found, please take a look https://github.com/onmyway133/Arcane/issues/4 or run xcode-select --install

• Make a folder CCommonCrypto containing module.modulemap

    module CCommonCrypto {
      header "/usr/include/CommonCrypto/CommonCrypto.h"
      export *
    }
  

• Go to Built Settings -> Import Paths

    ${SRCROOT}/Sources/CCommonCrypto
  

Cocoapods with modulemap approach

• Here is the podspec https://github.com/onmyway133/Arcane/blob/master/Arcane.podspec

    s.source_files = 'Sources/**/*.swift'
    s.xcconfig = { 'SWIFT_INCLUDE_PATHS' =>
    '$(PODS_ROOT)/CommonCryptoSwift/Sources/CCommonCrypto' }
    s.preserve_paths = 'Sources/CCommonCrypto/module.modulemap'
  

• Using module_map does not work, see https://github.com/CocoaPods/CocoaPods/issues/5271

• Using Local Development Pod with path does not work, see https://github.com/CocoaPods/CocoaPods/issues/809

• That's why you see that my Example Podfile https://github.com/onmyway133/CommonCrypto.swift/blob/master/Example/CommonCryptoSwiftDemo/Podfile points to the git repo

    target 'CommonCryptoSwiftDemo' do
      pod 'CommonCryptoSwift', :git => 'https://github.com/onmyway133/CommonCrypto.swift'
    end
  

public header approach

• Ji is a wrapper around libxml2, and it uses public header approach

• It has a header file https://github.com/honghaoz/Ji/blob/master/Source/Ji.h with Target Membership set to Public

• It has a list of header files for libxml2 https://github.com/honghaoz/Ji/tree/master/Source/Ji-libxml

• It has Build Settings -> Header Search Paths

    $(SDKROOT)/usr/include/libxml2
  

• It has Build Settings -> Other Linker Flags

    -lxml2
  

Cocoapods with public header approach

• Take a look at the podspec https://github.com/honghaoz/Ji/blob/master/Ji.podspec

    s.libraries        = "xml2"
    s.xcconfig         = { 'HEADER_SEARCH_PATHS' =>           '$(SDKROOT)/usr/include/libxml2', 'OTHER_LDFLAGS' => '-lxml2' }
  

Interesting related posts

• How to call C from Swift?
• https://spin.atomicobject.com/2015/02/23/c-libraries-swift/

Rijndael/AES is a block cypher. It encrypts data in 128 bit (16 character) blocks. Cryptographic padding is used to make sure that the last block of the message is always the correct size.

Your decryption method is expecting whatever its default padding is, and is not finding it. As @NetSquirrel says, you need to explicitly set the padding for both encryption and decryption. Unless you have a reason to do otherwise, use PKCS#7 padding.

Many distinctions have already been mentioned. Here is one more:

Running npm install at the top of your source directory will run various scripts: prepublish, preinstall, install, postinstall. Depending on what these scripts do, a npm install may do considerably more work than just installing dependencies.

I've just had a use case where prepublish would call make and the Makefile was designed to fetch dependencies if the package.json got updated. Calling npm install from within the Makefile would have lead to an infinite recursion, while calling npm update worked just fine, installing all dependencies so that the build could proceed even if make was called directly.

To turn off the foreign key constraint globally:

SET GLOBAL FOREIGN_KEY_CHECKS = 0;

And for the active foreign key constraint:

SET GLOBAL FOREIGN_KEY_CHECKS = 1;

grep "^-X" file

It will grep and pick all the lines form the file. ^ in the grep"^" indicates a line starting with

The best solution for your problem is to utilize a Pool. Using Queues and having a separate "queue feeding" functionality is probably overkill.

Here's a slightly rearranged version of your program, this time with only 2 processes coralled in a Pool. I believe it's the easiest way to go, with minimal changes to original code:

import multiprocessing
import time

data = (
    ['a', '2'], ['b', '4'], ['c', '6'], ['d', '8'],
    ['e', '1'], ['f', '3'], ['g', '5'], ['h', '7']
)

def mp_worker((inputs, the_time)):
    print " Processs %s\tWaiting %s seconds" % (inputs, the_time)
    time.sleep(int(the_time))
    print " Process %s\tDONE" % inputs

def mp_handler():
    p = multiprocessing.Pool(2)
    p.map(mp_worker, data)

if __name__ == '__main__':
    mp_handler()

Note that mp_worker() function now accepts a single argument (a tuple of the two previous arguments) because the map() function chunks up your input data into sublists, each sublist given as a single argument to your worker function.

Output:

Processs a  Waiting 2 seconds
Processs b  Waiting 4 seconds
Process a   DONE
Processs c  Waiting 6 seconds
Process b   DONE
Processs d  Waiting 8 seconds
Process c   DONE
Processs e  Waiting 1 seconds
Process e   DONE
Processs f  Waiting 3 seconds
Process d   DONE
Processs g  Waiting 5 seconds
Process f   DONE
Processs h  Waiting 7 seconds
Process g   DONE
Process h   DONE

Edit as per @Thales comment below:

If you want "a lock for each pool limit" so that your processes run in tandem pairs, ala:

A waiting B waiting | A done , B done | C waiting , D waiting | C done, D done | ...

then change the handler function to launch pools (of 2 processes) for each pair of data:

def mp_handler():
    subdata = zip(data[0::2], data[1::2])
    for task1, task2 in subdata:
        p = multiprocessing.Pool(2)
        p.map(mp_worker, (task1, task2))

Now your output is:

 Processs a Waiting 2 seconds
 Processs b Waiting 4 seconds
 Process a  DONE
 Process b  DONE
 Processs c Waiting 6 seconds
 Processs d Waiting 8 seconds
 Process c  DONE
 Process d  DONE
 Processs e Waiting 1 seconds
 Processs f Waiting 3 seconds
 Process e  DONE
 Process f  DONE
 Processs g Waiting 5 seconds
 Processs h Waiting 7 seconds
 Process g  DONE
 Process h  DONE

If you're creating a framework the whole idea is to make it portable. Tying a framework to the app delegate defeats the purpose of building a framework. What is it you need the app delegate for?

a = ['1', '2', '3', '4']
print len(a) - 1
3

You can create a Task with cancellation token, when you app goto background you can cancel this token.

You can do this in PCL https://developer.xamarin.com/guides/xamarin-forms/application-fundamentals/app-lifecycle

var cancelToken = new CancellationTokenSource();
Task.Factory.StartNew(async () => {
    await Task.Delay(10000);
    // call web API
}, cancelToken.Token);

//this stops the Task:
cancelToken.Cancel(false);

Anther solution is user Timer in Xamarin.Forms, stop timer when app goto background https://xamarinhelp.com/xamarin-forms-timer/

In case anyone's interested in the Method syntax, if you have a navigation property, it's way easy:

db.Services.Where(s=>s.ServiceAssignment.LocationId == 1);

If you don't, unless there's some Join() override I'm unaware of, I think it looks pretty gnarly (and I'm a Method syntax purist):

db.Services.Join(db.ServiceAssignments, 
     s => s.Id,
     sa => sa.ServiceId, 
     (s, sa) => new {service = s, asgnmt = sa})
.Where(ssa => ssa.asgnmt.LocationId == 1)
.Select(ssa => ssa.service);

In SQL Server 2012 you can do this :

Declare @Count1 int ;

Select @Count1 = Count(*)
FROM    [Log] AS L

SELECT  
   *
FROM    [Log] AS L
ORDER BY L.id
OFFSET @Count - 5 ROWS
FETCH NEXT 5 ROWS ONLY;

To undo your last commit, simply do git reset --hard HEAD~.

Edit: this answer applied to an earlier version of the question that did not mention preserving local changes; the accepted answer from Tim is indeed the correct one. Thanks to qwertzguy for the heads up.

You can simply use the Android's default HTML filter

    public String htmlToStringFilter(String textToFilter){

    return Html.fromHtml(textToFilter).toString();

    }

The above method will return the HTML filtered string for your input.

From axios docs you have baseURL and url

baseURL will be prepended to url when making requests. So you can define baseURL as http://127.0.0.1:8000 and make your requests to /url

 // `url` is the server URL that will be used for the request
 url: '/user',

 // `baseURL` will be prepended to `url` unless `url` is absolute.
 // It can be convenient to set `baseURL` for an instance of axios to pass relative URLs
 // to methods of that instance.
 baseURL: 'https://some-domain.com/api/',

This Kotlin state machine library has PlantUML export feature, it is not integrated with Android Studio but it is easy to visualize state machine structure on PlantUML web site.

https://github.com/nsk90/kstatemachine

When you need to toggle an element away, and you don't need to animate the margin property. You could try margin-top: -999999em. Just don't transition all.

I'm not sure I'm repeating someone but some time ago some good soul wrote Y-operator for recursively called function like:

def tail_recursive(func):
  y_operator = (lambda f: (lambda y: y(y))(lambda x: f(lambda *args: lambda: x(x)(*args))))(func)
  def wrap_func_tail(*args):
    out = y_operator(*args)
    while callable(out): out = out()
    return out
  return wrap_func_tail

and then recursive function needs form:

def my_recursive_func(g):
  def wrapped(some_arg, acc):
    if <condition>: return acc
    return g(some_arg, acc)
  return wrapped

# and finally you call it in code

(tail_recursive(my_recursive_func))(some_arg, acc)

for Fibonacci numbers your function looks like this:

def fib(g):
  def wrapped(n_1, n_2, n):
    if n == 0: return n_1
    return g(n_2, n_1 + n_2, n-1)
  return wrapped

print((tail_recursive(fib))(0, 1, 1000000))

output:

..684684301719893411568996526838242546875

(actually tones of digits)

WPF4

<DataGrid AutoGenerateColumns="True" Grid.Column="0" Grid.Row="0"
      ScrollViewer.CanContentScroll="True" 
      ScrollViewer.VerticalScrollBarVisibility="Auto"
      ScrollViewer.HorizontalScrollBarVisibility="Auto">
</DataGrid>

with : <ColumnDefinition Width="350" /> & <RowDefinition Height="300" /> works fine.

Scrollbars don't show with <ColumnDefinition Width="Auto" /> & <RowDefinition Height="300" />.

Also works fine with: <ColumnDefinition Width="*" /> & <RowDefinition Height="300" /> in the case where this is nested within an outer <Grid>.

It's just

$(this).val();

I think jQuery is clever enough to know what you need

How about the JDK source code?

The curly braces are inside the string, so it is being evaluated as string. They need to be outside, so this should work:

<div className={"btn-group pull-right " + (this.props.showBulkActions ? 'show' : 'hidden')}>

Note the space after "pull-right". You don't want to accidentally provide the class "pull-rightshow" instead of "pull-right show". Also the parentheses needs to be there.

When the DLL was created an import lib is usually automatically created and you should use that linked in to your program along with header files to call it but if not then you can manually call windows functions like LoadLibrary and GetProcAddress to get it working.

the $ sign in the string is for definition of interpolation string that is a feature in C# to interpolate the string is a "true string" that might contain interpolated expressions

for further information this is the source of the answer and example: https://docs.microsoft.com/en-us/dotnet/csharp/language-reference/tokens/interpolated

In Version of C# (6.0) & greater, you can do :

For Readonly properties

public int ReadOnlyProp => 2;

For both Writable & Readable properties

public string PropTest { get; set; } = "test";

In current Version of C# (7.0), you can do : (The snippet rather displays how you can use expression bodied get/set accessors to make is more compact when using with backing fields)

private string label = "Default Value";

// Expression-bodied get / set accessors.
public string Label
{
   get => label;
   set => this.label = value; 
 }

Mac Users

Fold Commands

Unfold commands

If the Path is omitted the file will be saved automaticaly in the current directory. Try something like this:

ActiveWorkbook.SaveAs "Filename.xslx"

Try this for Java programmatically:

myEditText(new InputFilter[] {new InputFilter.LengthFilter(CUSTOM_MAX_LEN)});

Do you understand the concept of casting? Casting is the process of type conversion, which is in Java very common because its a statically typed language. Some examples:

Cast the String "1" to an int -> no problem

Cast the String "abc" to an int -> raises a ClassCastException

Or think of a class diagram with Animal.class, Dog.class and Cat.class

Animal a = new Dog();
Dog d = (Dog) a; // No problem, the type animal can be casted to a dog, because its a dog.
Cat c = (Dog) a; // Raises class cast exception; you can't cast a dog to a cat.

You can do the faded background with CSS Generated Content

Demo at http://jsfiddle.net/gaby/WktFm/508/

Html

<div class="container">
        contents
</div>

Css

.container{
    position: relative;
    z-index:1;
    overflow:hidden; /*if you want to crop the image*/
}
.container:before{
    z-index:-1;
    position:absolute;
    left:0;
    top:0;
    content: url('path/to/image.ext');
    opacity:0.4;
}

But you cannot modify the opacity as we are not allowed to modify generated content..

You could manipulate it with classes and css events though (but not sure if it fits your needs)

for example

.container:hover:before{
    opacity:1;
}

UPDATE

You can use css transitions to animate the opacity (again through classes)

demo at http://jsfiddle.net/gaby/WktFm/507/

Adding

-webkit-transition: opacity 1s linear;
-o-transition: opacity 1s linear;
-moz-transition: opacity 1s linear;
transition: opacity 1s linear;

to the .container:before rule will make the opacity animate to 1 in one second.

Compatibility

• FF 5 (maybe 4 also, but do not have it installed.)
• IE 9 Fails..
• Webkit based browsers fail (Chrome supports it now v26 - maybe earlier versions too, but just checked with my current build), but they are aware and working on it ( https://bugs.webkit.org/show_bug.cgi?id=23209 )

.. so only the latest FF supports it for the moment.. but a nice idea, no ? :)

You can write the where clause as:

where (case when (:stateCode = '') then (1)
            when (:stateCode != '') and (vw.state_cd in (:stateCode)) then 1
            else 0)
       end) = 1;

Alternatively, remove the case entirely:

where (:stateCode = '') or
      ((:stateCode != '') and vw.state_cd in (:stateCode));

Or, even better:

where (:stateCode = '') or vw.state_cd in (:stateCode)

If you use Spring you could use

org.springframework.util.StringUtils.stripFilenameExtension(String path)

Strip the filename extension from the given Java resource path, e.g.

"mypath/myfile.txt" -> "mypath/myfile".

Params: path – the file path

Returns: the path with stripped filename extension

Remove the canvas dom and add in again.

function renderChart(label,data){

    $("#canvas-wrapper").html("").html('<canvas id="storeSends"></canvas>');
    var lineChartData = {
        labels : label,
        datasets : [
            {
                fillColor : "rgba(49, 195, 166, 0.2)",
                strokeColor : "rgba(49, 195, 166, 1)",
                pointColor : "rgba(49, 195, 166, 1)",
                pointStrokeColor : "#fff",
                data : data
            }
        ]

    }
    var canvas = document.getElementById("storeSends");
    var ctx = canvas.getContext("2d");

    myLine = new Chart(ctx).Line(lineChartData, {
        responsive: true,
        maintainAspectRatio: false
    });
}

I would avoid to do a query for each entry.

if(is_array($EMailArr)){

    $sql = "INSERT INTO email_list (R_ID, EMAIL, NAME) values ";

    $valuesArr = array();
    foreach($EMailArr as $row){

        $R_ID = (int) $row['R_ID'];
        $email = mysql_real_escape_string( $row['email'] );
        $name = mysql_real_escape_string( $row['name'] );

        $valuesArr[] = "('$R_ID', '$email', '$name')";
    }

    $sql .= implode(',', $valuesArr);

    mysql_query($sql) or exit(mysql_error()); 
}

Check this:

                     if (
 MessageBox.Show(@"Are you Alright?", @"My Message Box",MessageBoxButtons.YesNo) == DialogResult.Yes)
                    {
                        //YES ---> Ok IM ALRIGHHT
                    }
                    else
                   {
                   //NO --->NO IM STUCK
                    }

Regards

The @CustID means it's a parameter that you will supply a value for later in your code. This is the best way of protecting against SQL injection. Create your query using parameters, rather than concatenating strings and variables. The database engine puts the parameter value into where the placeholder is, and there is zero chance for SQL injection.

If your modal div is dynamically added then use( For bootstrap 3 and 4)

$(document).on('hide.bs.modal','#modal-id', function () {
                alert('');
 //Do stuff here
});

This will work for non-dynamic content also.

1. How can I do what I want to do (that is, initialize an array in a constructor (not assigning elements in the body)). Is it even possible?

Yes. It's using a struct that contains an array. You say you already know about that, but then I don't understand the question. That way, you do initialize an array in the constructor, without assignments in the body. This is what boost::array does.

Does the C++03 standard say anything special about initializing aggregates (including arrays) in ctor initializers? Or the invalidness of the above code is a corollary of some other rules?

A mem-initializer uses direct initialization. And the rules of clause 8 forbid this kind of thing. I'm not exactly sure about the following case, but some compilers do allow it.

struct A {
  char foo[6];
  A():foo("hello") { } /* valid? */
};

See this GCC PR for further details.

Do C++0x initializer lists solve the problem?

Yes, they do. However your syntax is invalid, I think. You have to use braces directly to fire off list initialization

struct A {
  int foo[3];
  A():foo{1, 2, 3} { }
  A():foo({1, 2, 3}) { } /* invalid */
};

In case anyone's reading this and wanting to protect master with client-side branch protection,

git branch -vv | grep "^\*" |grep -E '\* master |origin\/master'

will return 0 if either the local checked-out branch or its upstream remote branch is master.

Just put this in your .git/hooks directory's pre-commit and update files accordingly and Bob is your father's brother.

You can use a circular buffer :

Code

// buffer all data in a circular buffer of infinite size
CircularByteBuffer cbb = new CircularByteBuffer(CircularByteBuffer.INFINITE_SIZE);
class1.putDataOnOutputStream(cbb.getOutputStream());
class2.processDataFromInputStream(cbb.getInputStream());

Maven dependency

<dependency>
    <groupId>org.ostermiller</groupId>
    <artifactId>utils</artifactId>
    <version>1.07.00</version>
</dependency>

Mode details

http://ostermiller.org/utils/CircularBuffer.html

Can't upvote so I'll repost @jfs comment cause I think it should be more visible.

@AnneTheAgile: shell=True is not required. Moreover you should not use it unless it is necessary (see @ valid's comment). You should pass each command-line argument as a separate list item instead e.g., use ['command', 'arg 1', 'arg 2'] instead of "command 'arg 1' 'arg 2'". – jfs Mar 3 '15 at 10:02

Fix this by moving my jdk folder to other disk

list is mutable

Change

last_list=last_list.append(p.last_name)

to

last_list.append(p.last_name)

will work

If you are trying to achieve horizontal div scrolling with touch on mobile, the updated CSS fix does not work (tested on Android Chrome and iOS Safari multiple versions), eg:

-webkit-overflow-scrolling: touch

I found a solution and modified it for horizontal scrolling from before the CSS trick. I've tested it on Android Chrome and iOS Safari and the listener touch events have been around a long time, so it has good support: http://caniuse.com/#feat=touch.

Usage:

touchHorizScroll('divIDtoScroll');

Functions:

function touchHorizScroll(id){
    if(isTouchDevice()){ //if touch events exist...
        var el=document.getElementById(id);
        var scrollStartPos=0;

        document.getElementById(id).addEventListener("touchstart", function(event) {
            scrollStartPos=this.scrollLeft+event.touches[0].pageX;              
        },false);

        document.getElementById(id).addEventListener("touchmove", function(event) {
            this.scrollLeft=scrollStartPos-event.touches[0].pageX;              
        },false);
    }
}
function isTouchDevice(){
    try{
        document.createEvent("TouchEvent");
        return true;
    }catch(e){
        return false;
    }
}  

Modified from vertical solution (pre CSS trick):

http://chris-barr.com/2010/05/scrolling_a_overflowauto_element_on_a_touch_screen_device/

Just so that we have some other options: reset($arr); good enough if you're not trying to keep the array pointer in place, and with very large arrays it incurs an minimal amount of overhead. That said, there are some problems with it:

$arr = array(1,2);
current($arr); // 1
next($arr);    // 2
current($arr); // 2
reset($arr);   // 1
current($arr); // 1 !This was 2 before! We've changed the array's pointer.

The way to do this without changing the pointer:

$arr[reset(array_keys($arr))]; // OR
reset(array_values($arr));

The benefit of $arr[reset(array_keys($arr))]; is that it raises an warning if the array is actually empty.

I used below regex to get that result also when its finished by a \

(\\[^\\]+)\\?$

[Regex Demo]

You should use

$('#dropdownid').val('selectedvalue');

Here's an example:

$('#dropdownid').val('selectedvalue');

<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>
<select id='dropdownid'>
    <option value=''>- Please choose -</option>
    <option value='1'>1</option>
    <option value='2'>2</option>
    <option value='selectedvalue'>There we go!</option>
    <option value='3'>3</option>
    <option value='4'>4</option>
    <option value='5'>5</option>
</select>

Define the variables at the beginning of the function so if there are no records, the variables exist and you won't get the error. Check for null values in the returned array.

$hn = null;
$pid = null;
$datereg = null;
$prefix = null;
$fname = null;
$lname = null;
$age = null;
$sex = null;

It looks like you indented so_far = new too much. Try this:

if guess in word:
    print("\nYes!", guess, "is in the word!")

    # Create a new variable (so_far) to contain the guess
    new = ""
    i = 0
    for i in range(len(word)):
        if guess == word[i]:
            new += guess
        else:
            new += so_far[i]
    so_far = new # unindented this

Cheaper, Faster, and Idiomatic: str.contains

In recent versions of pandas, you can use string methods on the index and columns. Here, str.startswith seems like a good fit.

To remove all columns starting with a given substring:

df.columns.str.startswith('Test')
# array([ True, False, False, False])

df.loc[:,~df.columns.str.startswith('Test')]

  toto test2 riri
0    x     x    x
1    x     x    x

For case-insensitive matching, you can use regex-based matching with str.contains with an SOL anchor:

df.columns.str.contains('^test', case=False)
# array([ True, False,  True, False])

df.loc[:,~df.columns.str.contains('^test', case=False)] 

  toto riri
0    x    x
1    x    x

if mixed-types is a possibility, specify na=False as well.

I added

"types": [ 
   "node"
]

in my tsconfig file and its worked for me tsconfig.json file look like

  "extends": "../tsconfig.json",
  "compilerOptions": {
    "outDir": "../out-tsc/app",
    "baseUrl": "./",
    "module": "es2015",
    "types": [ 
      "node",
      "underscore"
    ]
  },  

given the following examples

• SQL Instance Name: MSSQLSERVER
• Port: 1433
• Hostname: MyKitchenPC
• IPv4: 10.242.137.227
• DNS Suffix: dir.svc.mykitchencompany.com

here are your possible servernames:

• localhost\MSSQLSERVER
• localhost,1433\MSSQLSERVER
• MyKitchenPC,1433\MSSQLSERVER
• 10.242.137.227,1433\MSSQLSERVER
• MyKitchenPC.dir.svc.mykitchencompany.com,1433\MSSQLSERVER

There are two options that I can think of, but without more details, I can't be sure which is the better:

#elementId {
    display: block;
}

This will force the element to a 'new line' if it's not on the same line as a floated element.

#elementId {
     clear: both;
}

This will force the element to clear the floats, and move to a 'new line.'

In the case of the element being on the same line as another that has position of fixed or absolute nothing will, so far as I know, force a 'new line,' as those elements are removed from the document's normal flow.

clear_btm=Button(master,text="Clear") #this button will delete the widgets 
clear_btm["command"] = lambda one = button1, two = text1, three = entry1: clear(one,two,three) #pass the widgets
clear_btm.pack()

def clear(*widgets):
    for widget in widgets:
        widget.destroy() #finally we are deleting the widgets.