SyntaxFix

Programs & Examples On #Dmcs

"’" showing on page instead of " ' "

So what's the problem,

It's a ’ (RIGHT SINGLE QUOTATION MARK - U+2019) character which is being decoded as CP-1252 instead of UTF-8. If you check the encodings table, then you see that this character is in UTF-8 composed of bytes 0xE2, 0x80 and 0x99. If you check the CP-1252 code page layout, then you'll see that each of those bytes stand for the individual characters â, € and ™.

and how can I fix it?

Use UTF-8 instead of CP-1252 to read, write, store, and display the characters.

I have the Content-Type set to UTF-8 in both my <head> tag and my HTTP headers:

<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />

This only instructs the client which encoding to use to interpret and display the characters. This doesn't instruct your own program which encoding to use to read, write, store, and display the characters in. The exact answer depends on the server side platform / database / programming language used. Do note that the one set in HTTP response header has precedence over the HTML meta tag. The HTML meta tag would only be used when the page is opened from local disk file system instead of from HTTP.

In addition, my browser is set to Unicode (UTF-8):

This only forces the client which encoding to use to interpret and display the characters. But the actual problem is that you're already sending ’ (encoded in UTF-8) to the client instead of ’. The client is correctly displaying ’ using the UTF-8 encoding. If the client was misinstructed to use, for example ISO-8859-1, you would likely have seen ââ¬â¢ instead.

I am using ASP.NET 2.0 with a database.

This is most likely where your problem lies. You need to verify with an independent database tool what the data looks like.

If the ’ character is there, then you aren't connecting to the database correctly. You need to tell the database connector to use UTF-8.

If your database contains ’, then it's your database that's messed up. Most probably the tables aren't configured to use UTF-8. Instead, they use the database's default encoding, which varies depending on the configuration. If this is your issue, then usually just altering the table to use UTF-8 is sufficient. If your database doesn't support that, you'll need to recreate the tables. It is good practice to set the encoding of the table when you create it.

You're most likely using SQL Server, but here is some MySQL code (copied from this article):

CREATE DATABASE db_name CHARACTER SET utf8;
CREATE TABLE tbl_name (...) CHARACTER SET utf8;

If your table is however already UTF-8, then you need to take a step back. Who or what put the data there. That's where the problem is. One example would be HTML form submitted values which are incorrectly encoded/decoded.

Here are some more links to learn more about the problem:

How to split page into 4 equal parts?

I did not want to add style to <body> tag and <html> tag.

_x000D_
_x000D_ 
.quodrant{
    width: 100%;
    height: 100vh;
    margin: 0;
    padding: 0;
}

.qtop,
.qbottom{
    width: 100%;
    height: 50vh;
}

.quodrant1,
.quodrant2,
.quodrant3,
.quodrant4{
    display: inline;
    float: left;
    width: 50%;
    height: 100%;
}

.quodrant1{
    top: 0;
    left: 50vh;
    background-color: red;
}

.quodrant2{
    top: 0;
    left: 0;
    background-color: yellow;
}

.quodrant3{
    top: 50vw;
    left: 0;
    background-color: blue;
}

.quodrant4{ 
    top: 50vw;
    left: 50vh;
    background-color: green;
}
_x000D_ 
<!DOCTYPE html>
<html lang="en">
<head>
    <meta charset="UTF-8">
    <title>Document</title>
    <link type="text/css" rel="stylesheet" href="main.css" />
</head>
<body>

<div class='quodrant'>
    <div class='qtop'>
        <div class='quodrant1'></div>
        <div class='quodrant2'></div>
    </div>
    <div class='qbottom'>
        <div class='quodrant3'></div>
        <div class='quodrant4'></div>
    </div>
</div>

<script type="text/javascript" src="main.js"></script>
</body>
</html>
_x000D_
_x000D_
_x000D_

Or making it looks nicer.

_x000D_
_x000D_ 
.quodrant{
    width: 100%;
    height: 100vh;
    margin: 0;
    padding: 0;
}

.qtop,
.qbottom{
    width: 96%;
    height: 46vh;
}

.quodrant1,
.quodrant2,
.quodrant3,
.quodrant4{
    display: inline;
    float: left;
    width: 46%;
    height: 96%;
    border-radius: 30px;
    margin: 2%;
}

.quodrant1{
    background-color: #948be5;
}

.quodrant2{
    background-color: #22e235;
}

.quodrant3{
    background-color: #086e75;
}

.quodrant4{ 
    background-color: #7cf5f9;
}
_x000D_ 
<!DOCTYPE html>
<html lang="en">
<head>
    <meta charset="UTF-8">
    <title>Document</title>
    <link type="text/css" rel="stylesheet" href="main.css" />
</head>
<body>

<div class='quodrant'>
    <div class='qtop'>
        <div class='quodrant1'></div>
        <div class='quodrant2'></div>
    </div>
    <div class='qbottom'>
        <div class='quodrant3'></div>
        <div class='quodrant4'></div>
    </div>
</div>

<script type="text/javascript" src="main.js"></script>
</body>
</html>
_x000D_
_x000D_
_x000D_

jump to line X in nano editor

I am using nano editor in a Raspberry Pi with Italian OS language and Italian keyboard. Don't know the exact reason, but in this environment the shortcut is:

Ctrl+-

Creating an instance using the class name and calling constructor

You can use reflections

return Class.forName(className).getConstructor(String.class).newInstance(arg);

How to name variables on the fly?

Don't make data frames. Keep the list, name its elements but do not attach it.

The biggest reason for this is that if you make variables on the go, almost always you will later on have to iterate through each one of them to perform something useful. There you will again be forced to iterate through each one of the names that you have created on the fly.

It is far easier to name the elements of the list and iterate through the names.

As far as attach is concerned, its really bad programming practice in R and can lead to a lot of trouble if you are not careful.

How do I split a string into an array of characters?

The split() method in javascript accepts two parameters: a separator and a limit. The separator specifies the character to use for splitting the string. If you don't specify a separator, the entire string is returned, non-separated. But, if you specify the empty string as a separator, the string is split between each character.

Therefore:

s.split('')

will have the effect you seek.

More information here

a href link for entire div in HTML/CSS

Going off of what Surreal Dreams said, it's probably best to style the anchor tag in my experience, but it really does depend on what you are doing. Here's an example:

Html:

<div class="parent-div">
  <a href="#">Test</a>
  <a href="#">Test</a>
  <a href="#">Test</a>
</div>

Then the CSS:

.parent-div {
  width: 200px;
}
a {
  display:block;
  background-color: #ccc;
  color: #000;
  text-decoration:none;
  padding:10px;
  margin-bottom:1px;
}
a:hover {
  background-color: #ddd;
}

http://jsbin.com/zijijuduqo/1/edit?html,css,output

How to delete rows in tables that contain foreign keys to other tables

Need to set the foreign key option as on delete cascade... in tables which contains foreign key columns.... It need to set at the time of table creation or add later using ALTER table

ClientScript.RegisterClientScriptBlock?

See if the below helps you:

I was using the following earlier:

ClientScript.RegisterClientScriptBlock(Page.GetType(), "AlertMsg", "<script language='javascript'>alert('The Web Policy need to be accepted to submit the new assessor information.');</script>");

After implementing AJAX in this page, it stopped working. After reading your blog, I changed the above to:

ScriptManager.RegisterClientScriptBlock(imgBtnSubmit, this.GetType(), "AlertMsg", "<script language='javascript'>alert('The Web Policy need to be accepted to submit the new assessor information.');</script>", false);

This is working perfectly fine.

(It’s .NET 2.0 Framework, I am using)

How do I remove packages installed with Python's easy_install?

If the problem is a serious-enough annoyance to you, you might consider virtualenv. It allows you to create an environment that encapsulates python libraries. You install packages there rather than in the global site-packages directory. Any scripts you run in that environment have access to those packages (and optionally, your global ones as well). I use this a lot when evaluating packages that I am not sure I want/need to install globally. If you decide you don't need the package, it's easy enough to just blow that virtual environment away. It's pretty easy to use. Make a new env:

$>virtualenv /path/to/your/new/ENV

virtual_envt installs setuptools for you in the new environment, so you can do:

$>ENV/bin/easy_install

You can even create your own boostrap scripts that setup your new environment. So, with one command, you can create a new virtual env with, say, python 2.6, psycopg2 and django installed by default (you can can install an env-specific version of python if you want).

Laravel Eloquent where field is X or null

You could merge two queries together:

$merged = $query_one->merge($query_two);

running php script (php function) in linux bash

 
php test.php

should do it, or

php -f test.php

to be explicit.

window.onload vs document.onload

The general idea is that window.onload fires when the document's window is ready for presentation and document.onload fires when the DOM tree (built from the markup code within the document) is completed.

Ideally, subscribing to DOM-tree events, allows offscreen-manipulations through Javascript, incurring almost no CPU load. Contrarily, window.onload can take a while to fire, when multiple external resources have yet to be requested, parsed and loaded.

?Test scenario:

To observe the difference and how your browser of choice implements the aforementioned event handlers, simply insert the following code within your document's - <body>- tag.

<script language="javascript">
window.tdiff = []; fred = function(a,b){return a-b;};
window.document.onload = function(e){ 
    console.log("document.onload", e, Date.now() ,window.tdiff,  
    (window.tdiff[0] = Date.now()) && window.tdiff.reduce(fred) ); 
}
window.onload = function(e){ 
    console.log("window.onload", e, Date.now() ,window.tdiff, 
    (window.tdiff[1] = Date.now()) && window.tdiff.reduce(fred) ); 
}
</script>

?Result:

Here is the resulting behavior, observable for Chrome v20 (and probably most current browsers).

  • No document.onload event.
  • onload fires twice when declared inside the <body>, once when declared inside the <head> (where the event then acts as document.onload ).
  • counting and acting dependent on the state of the counter allows to emulate both event behaviors.
  • Alternatively declare the window.onload event handler within the confines of the HTML-<head> element.

?Example Project:

The code above is taken from this project's codebase (index.html and keyboarder.js).

For a list of event handlers of the window object, please refer to the MDN documentation.

List all files in one directory PHP

You are looking for the command scandir.

$path    = '/tmp';
$files = scandir($path);

Following code will remove . and .. from the returned array from scandir:

$files = array_diff(scandir($path), array('.', '..'));

Angular 2 Scroll to top on Route Change

window.scrollTo() doesn't work for me in Angular 5, so I have used document.body.scrollTop like,

this.router.events.subscribe((evt) => {
   if (evt instanceof NavigationEnd) {
      document.body.scrollTop = 0;
   }
});

Keyboard shortcut to change font size in Eclipse?

Windows > Preferences > General > Appearance > Colors and Fonts

Then, to change Java editor font: Java > Java Editor Text Font > EDIT

There it is.

How to find what code is run by a button or element in Chrome using Developer Tools

You can use findHandlersJS

You can find the handler by doing in the chrome console:

findEventHandlers("click", "img.envio")

You'll get the following information printed in chrome's console:

  • element
    The actual element where the event handler was registered in
  • events
    Array with information about the jquery event handlers for the event type that we are interested in (e.g. click, change, etc)
  • handler
    Actual event handler method that you can see by right clicking it and selecting Show function definition
  • selector
    The selector provided for delegated events. It will be empty for direct events.
  • targets
    List with the elements that this event handler targets. For example, for a delegated event handler that is registered in the document object and targets all buttons in a page, this property will list all buttons in the page. You can hover them and see them highlighted in chrome.

More info here and you can try it in this example site here.

Pass variables by reference in JavaScript
  1. primitive type variables like strings and numbers are always passed by value.

  2. Arrays and Objects are passed by reference or by value based on these conditions:

    • if you are setting the value of an object or array it is Pass by Value.

      object1 = {prop: "car"}; array1 = [1,2,3];

    • if you are changing a property value of an object or array then it is Pass by Reference.

      object1.prop = "car"; array1[0] = 9;

Code

_x000D_
_x000D_ 
function passVar(obj1, obj2, num) {_x000D_
    obj1.prop = "laptop"; // will CHANGE original_x000D_
    obj2 = { prop: "computer" }; //will NOT affect original_x000D_
    num = num + 1; // will NOT affect original_x000D_
}_x000D_
_x000D_
var object1 = {_x000D_
    prop: "car"_x000D_
};_x000D_
var object2 = {_x000D_
    prop: "bike"_x000D_
};_x000D_
var number1 = 10;_x000D_
_x000D_
passVar(object1, object2, number1);_x000D_
console.log(object1); //output: Object {item:"laptop"}_x000D_
console.log(object2); //output: Object {item:"bike"}_x000D_
console.log(number1); //ouput: 10
_x000D_
_x000D_
_x000D_

Invoke or BeginInvoke cannot be called on a control until the window handle has been created

The method in the post you link to calls Invoke/BeginInvoke before checking if the control's handle has been created in the case where it's being called from a thread that didn't create the control.

So you'll get the exception when your method is called from a thread other than the one that created the control. This can happen from remoting events or queued work user items...

EDIT

If you check InvokeRequired and HandleCreated before calling invoke you shouldn't get that exception.

Time part of a DateTime Field in SQL

This will return the time-Only

For SQL Server:

SELECT convert(varchar(8), getdate(), 108)

Explanation:

getDate() is giving current date and time.
108 is formatting/giving us the required portion i.e time in this case.
varchar(8) gives us the number of characters from that portion.
Like:
If you wrote varchar(7) there, it will give you 00:00:0
If you wrote varchar(6) there, it will give you 00:00:
If you wrote varchar(15) there, it will still give you 00:00:00 because it is giving output of just time portion. SQLFiddle Demo

For MySQL:

SELECT DATE_FORMAT(NOW(), '%H:%i:%s')

SQLFiddle Demo

How to handle ListView click in Android

First, the class must implements the click listenener :

implements OnItemClickListener

Then set a listener to the ListView

yourList.setOnItemclickListener(this);

And finally, create the clic method:

@Override
public void onItemClick(AdapterView<?> parent, View view, int position,
long id) {
Toast.makeText(MainActivity.this, "You Clicked at " +countries[+ position], Toast.LENGTH_SHORT).show();
}

you can take a look and download code here

How to get the mouse position without events (without moving the mouse)?

You do not have to move the mouse to get the cursor's location. The location is also reported on events other than mousemove. Here's a click-event as an example:

document.body.addEventListener('click',function(e)
{
    console.log("cursor-location: " + e.clientX + ',' + e.clientY);
});

Simple working Example of json.net in VB.net

Your class JSON_result does not match your JSON string. Note how the object JSON_result is going to represent is wrapped in another property named "Venue".

So either create a class for that, e.g.:

Public Class Container
    Public Venue As JSON_result
End Class

Public Class JSON_result
    Public ID As Integer
    Public Name As String
    Public NameWithTown As String
    Public NameWithDestination As String
    Public ListingType As String
End Class

Dim obj = JsonConvert.DeserializeObject(Of Container)(...your_json...)

or change your JSON string to 

{
    "ID": 3145,
    "Name": "Big Venue, Clapton",
    "NameWithTown": "Big Venue, Clapton, London",
    "NameWithDestination": "Big Venue, Clapton, London",
    "ListingType": "A",
    "Address": {
        "Address1": "Clapton Raod",
        "Address2": "",
        "Town": "Clapton",
        "County": "Greater London",
        "Postcode": "PO1 1ST",
        "Country": "United Kingdom",
        "Region": "Europe"
    },
    "ResponseStatus": {
        "ErrorCode": "200",
        "Message": "OK"
    }
}

or use e.g. a ContractResolver to parse the JSON string.

Visual C++ executable and missing MSVCR100d.dll

For me the problem appeared in this situation:

I installed VS2012 and did not need VS2010 anymore. I wanted to get my computer clean and also removed the VS2010 runtime executables, thinking that no other program would use it. Then I wanted to test my DLL by attaching it to a program (let's call it program X). I got the same error message. I thought that I did something wrong when compiling the DLL. However, the real problem was that I attached the DLL to program X, and program X was compiled in VS2010 with debug info. That is why the error was thrown. I recompiled program X in VS2012, and the error was gone.

Change the Bootstrap Modal effect

If you take a look at the bootstraps fade class used with the modal window you will find, that all it does, is to set the opacity value to 0 and adds a transition for the opacity rule.

Whenever you launch a modal the in class is added and will change the opacity to a value of 1.

Knowing that you can easily build your own fade-scale class.

Here is an example.

_x000D_
_x000D_ 
@import url("https://maxcdn.bootstrapcdn.com/bootstrap/3.3.5/css/bootstrap.min.css");_x000D_
_x000D_
.fade-scale {_x000D_
  transform: scale(0);_x000D_
  opacity: 0;_x000D_
  -webkit-transition: all .25s linear;_x000D_
  -o-transition: all .25s linear;_x000D_
  transition: all .25s linear;_x000D_
}_x000D_
_x000D_
.fade-scale.in {_x000D_
  opacity: 1;_x000D_
  transform: scale(1);_x000D_
}
_x000D_ 
<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.0/jquery.min.js"></script>_x000D_
<script src="https://maxcdn.bootstrapcdn.com/bootstrap/3.3.5/js/bootstrap.min.js"></script>_x000D_
_x000D_
<!-- Button trigger modal -->_x000D_
<button type="button" class="btn btn-primary btn-lg" data-toggle="modal" data-target="#myModal">_x000D_
  Launch demo modal_x000D_
</button>_x000D_
_x000D_
<!-- Modal -->_x000D_
<div class="modal fade-scale" id="myModal" tabindex="-1" role="dialog" aria-labelledby="myModalLabel">_x000D_
  <div class="modal-dialog" role="document">_x000D_
    <div class="modal-content">_x000D_
      <div class="modal-header">_x000D_
        <button type="button" class="close" data-dismiss="modal" aria-label="Close"><span aria-hidden="true">&times;</span></button>_x000D_
        <h4 class="modal-title" id="myModalLabel">Modal title</h4>_x000D_
      </div>_x000D_
      <div class="modal-body">_x000D_
        ..._x000D_
      </div>_x000D_
      <div class="modal-footer">_x000D_
        <button type="button" class="btn btn-default" data-dismiss="modal">Close</button>_x000D_
        <button type="button" class="btn btn-primary">Save changes</button>_x000D_
      </div>_x000D_
    </div>_x000D_
  </div>_x000D_
</div>
_x000D_
_x000D_
_x000D_

-- UPDATE --

This answer is getting more up votes lately so i figured i add an update to show how easy it is to customize the BS modal in and out animations with the help of the great Animate.css library by
Daniel Eden.

All that needs to be done is to include the stylesheet to your <head></head> section. Now you simply need to add the animated class, plus one of the entrance classes of the library to the modal element.

<div class="modal animated fadeIn" id="myModal" tabindex="-1" role="dialog" ...>
  ...
</div>

But there is also a way to add an out animation to the modal window and since the library has a bunch of cool animations that will make an element disappear, why not use them. :)

To use them you will need to toggle the classes on the modal element, so it is actually better to call the modal window via JavaScript, which is described here.

You will also need to listen for some of the modal events to know when it's time to add or remove the classes from the modal element. The events being fired are described here.

To trigger a custom out animation you can't use the data-dismiss="modal" attribute on a button inside the modal window that's suppose to close the modal. You can simply add your own attribute like data-custom-dismiss="modal" and use that to call the $('selector').modal.('hide') method on it.

Here is an example that shows all the different possibilities.

_x000D_
_x000D_ 
/* -------------------------------------------------------_x000D_
| This first part can be ignored, it is just getting_x000D_
| all the different entrance and exit classes of the_x000D_
| animate-config.json file from the github repo._x000D_
--------------------------------------------------------- */_x000D_
_x000D_
var animCssConfURL = 'https://api.github.com/repos/daneden/animate.css/contents/animate-config.json';_x000D_
var selectIn = $('#animation-in-types');_x000D_
var selectOut = $('#animation-out-types');_x000D_
var getAnimCSSConfig = function ( url ) { return $.ajax( { url: url, type: 'get', dataType: 'json' } ) };_x000D_
var decode = function ( data ) {_x000D_
  var bin = Uint8Array.from( atob( data['content'] ), function( char ) { return char.charCodeAt( 0 ) } );_x000D_
  var bin2Str = String.fromCharCode.apply( null, bin );_x000D_
  return JSON.parse( bin2Str )_x000D_
}_x000D_
var buildSelect = function ( which, name, animGrp ) {_x000D_
  var grp = $('<optgroup></optgroup>');_x000D_
  grp.attr('label', name);_x000D_
  $.each(animGrp, function ( idx, animType ) {_x000D_
    var opt = $('<option></option>')_x000D_
    opt.attr('value', idx)_x000D_
    opt.text(idx)_x000D_
    grp.append(opt);_x000D_
  })_x000D_
  which.append(grp) _x000D_
}_x000D_
getAnimCSSConfig( animCssConfURL )_x000D_
  .done (function ( data ) {_x000D_
  var animCssConf = decode ( data );_x000D_
  $.each(animCssConf, function(name, animGrp) {_x000D_
    if ( /_entrances/.test(name) ) {_x000D_
      buildSelect(selectIn, name, animGrp);_x000D_
    }_x000D_
    if ( /_exits/.test(name) ) {_x000D_
      buildSelect(selectOut, name, animGrp);_x000D_
    }_x000D_
  })_x000D_
})_x000D_
_x000D_
_x000D_
/* -------------------------------------------------------_x000D_
| Here is were the fun begins._x000D_
--------------------------------------------------------- */_x000D_
_x000D_
var modalBtn = $('button');_x000D_
var modal = $('#myModal');_x000D_
var animInClass = "";_x000D_
var animOutClass = "";_x000D_
_x000D_
modalBtn.on('click', function() {_x000D_
  animInClass = selectIn.find('option:selected').val();_x000D_
  animOutClass = selectOut.find('option:selected').val();_x000D_
  if ( animInClass == '' || animOutClass == '' ) {_x000D_
    alert("Please select an in and out animation type.");_x000D_
  } else {_x000D_
    modal.addClass(animInClass);_x000D_
    modal.modal({backdrop: false});_x000D_
  }_x000D_
})_x000D_
_x000D_
modal.on('show.bs.modal', function () {_x000D_
  var closeModalBtns = modal.find('button[data-custom-dismiss="modal"]');_x000D_
  closeModalBtns.one('click', function() {_x000D_
    modal.on('webkitAnimationEnd oanimationend msAnimationEnd animationend', function( evt ) {_x000D_
      modal.modal('hide')_x000D_
    });_x000D_
    modal.removeClass(animInClass).addClass(animOutClass);_x000D_
  })_x000D_
})_x000D_
_x000D_
modal.on('hidden.bs.modal', function ( evt ) {_x000D_
  var closeModalBtns = modal.find('button[data-custom-dismiss="modal"]');_x000D_
  modal.removeClass(animOutClass)_x000D_
  modal.off('webkitAnimationEnd oanimationend msAnimationEnd animationend')_x000D_
  closeModalBtns.off('click')_x000D_
})
_x000D_ 
@import url('https://maxcdn.bootstrapcdn.com/bootstrap/3.3.7/css/bootstrap.min.css');_x000D_
@import url('https://cdnjs.cloudflare.com/ajax/libs/animate.css/3.5.2/animate.css');_x000D_
_x000D_
select, button:not([data-custom-dismiss="modal"]) {_x000D_
  margin: 10px 0;_x000D_
  width: 220px;_x000D_
}
_x000D_ 
<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>_x000D_
<script src="https://maxcdn.bootstrapcdn.com/bootstrap/3.3.7/js/bootstrap.min.js"></script>_x000D_
_x000D_
<div class="container">_x000D_
  <div class="row">_x000D_
    <div class="col-xs-4 col-xs-offset-4 col-sm-4 col-sm-offset-4">_x000D_
      <select id="animation-in-types">_x000D_
        <option value="" selected>Choose animation-in type</option>_x000D_
      </select>_x000D_
    </div>_x000D_
  </div>_x000D_
  <div class="row">_x000D_
    <div class="col-xs-4 col-xs-offset-4 col-sm-4 col-sm-offset-4">_x000D_
      <select id="animation-out-types">_x000D_
        <option value="" selected>Choose animation-out type</option>_x000D_
      </select>_x000D_
    </div>_x000D_
  </div>_x000D_
  <div class="row">_x000D_
    <div class="col-xs-4 col-xs-offset-4 col-sm-4 col-sm-offset-4">_x000D_
      <button class="btn btn-default">Open Modal</button>_x000D_
    </div>_x000D_
  </div>_x000D_
</div>_x000D_
_x000D_
<!-- Modal -->_x000D_
<div class="modal animated" id="myModal" tabindex="-1" role="dialog" aria-labelledby="myModalLabel">_x000D_
  <div class="modal-dialog" role="document">_x000D_
    <div class="modal-content">_x000D_
      <div class="modal-header">_x000D_
        <button type="button" class="close" data-custom-dismiss="modal" aria-label="Close"><span aria-hidden="true">&times;</span></button>_x000D_
        <h4 class="modal-title" id="myModalLabel">Modal title</h4>_x000D_
      </div>_x000D_
      <div class="modal-body">_x000D_
        ..._x000D_
      </div>_x000D_
      <div class="modal-footer">_x000D_
        <button type="button" class="btn btn-default" data-custom-dismiss="modal">Close</button>_x000D_
      </div>_x000D_
    </div>_x000D_
  </div>_x000D_
</div>
_x000D_
_x000D_
_x000D_

Nodejs convert string into UTF-8

I had the same problem, when i loaded a text file via fs.readFile(), I tried to set the encodeing to UTF8, it keeped the same. my solution now is this:

myString = JSON.parse( JSON.stringify( myString ) )

after this an Ö is realy interpreted as an Ö.

Creating and Update Laravel Eloquent

check if a user exists or not. If not insert

$exist = DB::table('User')->where(['username'=>$username,'password'=>$password])->get();
if(count($exist)  >0) {
    echo "User already exist";;
}
else  {
    $data=array('username'=>$username,'password'=>$password);
    DB::table('User')->insert($data);
}
Laravel 5.4

Xcode - ld: library not found for -lPods

I got the same error.

The issue: I created a separate Workspace and added my existing project into it. I got the error when I worked on that Workspace.

The fix: Later I found that Workspace gets created automatically inside the existing project when dependencies are added. And have to work on that workspace.

Remove Last Comma from a string

First, one should check if the last character is a comma. If it exists, remove it.

if (str.indexOf(',', this.length - ','.length) !== -1) {
    str = str.substring(0, str.length - 1);
}

NOTE str.indexOf(',', this.length - ','.length) can be simplified to str.indexOf(',', this.length - 1)

Return array from function

At a minimum, change this:

function BlockID() {
    var IDs = new Array();
        images['s'] = "Images/Block_01.png";
        images['g'] = "Images/Block_02.png";
        images['C'] = "Images/Block_03.png";
        images['d'] = "Images/Block_04.png";
    return IDs;
}

To this:

function BlockID() {
    var IDs = new Object();
        IDs['s'] = "Images/Block_01.png";
        IDs['g'] = "Images/Block_02.png";
        IDs['C'] = "Images/Block_03.png";
        IDs['d'] = "Images/Block_04.png";
    return IDs;
}

There are a couple fixes to point out. First, images is not defined in your original function, so assigning property values to it will throw an error. We correct that by changing images to IDs. Second, you want to return an Object, not an Array. An object can be assigned property values akin to an associative array or hash -- an array cannot. So we change the declaration of var IDs = new Array(); to var IDs = new Object();.

After those changes your code will run fine, but it can be simplified further. You can use shorthand notation (i.e., object literal property value shorthand) to create the object and return it immediately:

function BlockID() {
    return {
            "s":"Images/Block_01.png"
            ,"g":"Images/Block_02.png"
            ,"C":"Images/Block_03.png"
            ,"d":"Images/Block_04.png"
    };
}

PHP get dropdown value and text

 
$animals = array('--Select Animal--', 'Cat', 'Dog', 'Cow');
$selected_key = $_POST['animal'];
$selected_val = $animals[$_POST['animal']];

Use your $animals list to generate your dropdown list; you now can get the key & the value of that key.

Android - Start service on boot

I have found a way to make your application run well when the device reboots, please follow the steps below to be successful.

AndroidManifest file

<?xml version="1.0" encoding="utf-8"?>
<manifest xmlns:android="http://schemas.android.com/apk/res/android"
package="pack.saltriver" android:versionCode="1" android:versionName="1.0">
<uses-permission 
android:name="android.permission.REQUEST_IGNORE_BATTERY_OPTIMIZATIONS"/>
<uses-permission android:name="android.permission.RECEIVE_BOOT_COMPLETED" />

<application android:icon="@drawable/icon" android:label="@string/app_name">

<activity android:name=".MainActivity">
        <intent-filter>
            <action android:name="android.intent.action.MAIN" />

            <category android:name="android.intent.category.LAUNCHER" />
        </intent-filter>
    </activity>
    <receiver android:name=".UIBootReceiver" android:enabled="true" 
    android:exported="true">
        <intent-filter>
            <action android:name="android.intent.action.BOOT_COMPLETED" />
            <category android:name="android.intent.category.DEFAULT" />
        </intent-filter>
    </receiver>
     <service android:name=".class_Service" />
</application>

UIBootReceiver

public class UIBootReceiver extends BroadcastReceiver {

private static final String TAG = "UIBootReceiver";
@Override

    public void onReceive(Context context, Intent arg1)
    {
        Toast.makeText(context, "started", Toast.LENGTH_SHORT).show();
        Intent intent = new Intent(context,class_Service.class);
        context.startService(intent);
    }
  }

This is asking permission to not need to manage battery saving for this app so you can run in the background stably.

Declare this code in onCreate () of MainActivity class:

   Intent myIntent = new Intent();
    if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.M) {
        myIntent.setAction(Settings.ACTION_REQUEST_IGNORE_BATTERY_OPTIMIZATIONS);
        myIntent.setData(Uri.parse("package:" + 
   DeviceMovingSpeed.this.getPackageName()));
    }
    startActivity(myIntent);

IntelliJ - show where errors are

Besides, you can choose going to next error only (ignore warning) by:

  1. Right click the Validation Side Bar.
  2. On the context menu, choose the Go to high priority problems only

it works for Intellij Idea 12

How to send a POST request in Go?

I know this is old but this answer came up in search results. For the next guy - the proposed and accepted answer works, however the code initially submitted in the question is lower-level than it needs to be. Nobody got time for that.

//one-line post request/response...
response, err := http.PostForm(APIURL, url.Values{
    "ln": {c.ln},
    "ip": {c.ip},
    "ua": {c.ua}})

//okay, moving on...
if err != nil {
  //handle postform error
}

defer response.Body.Close()
body, err := ioutil.ReadAll(response.Body)

if err != nil {
  //handle read response error
}

fmt.Printf("%s\n", string(body))

https://golang.org/pkg/net/http/#pkg-overview

How to create a button programmatically?

Yeah in simulator. Some times it wont recognise the selector there is a bug it seems. Even i faced not for your code , then i just changed the action name (selector). It works

let buttonPuzzle:UIButton = UIButton(frame: CGRectMake(100, 400, 100, 50))
buttonPuzzle.backgroundColor = UIColor.greenColor()
buttonPuzzle.setTitle("Puzzle", forState: UIControlState.Normal)
buttonPuzzle.addTarget(self, action: "buttonAction:", forControlEvents: UIControlEvents.TouchUpInside)
buttonPuzzle.tag = 22;
self.view.addSubview(buttonPuzzle)

Selector Function is Here:

func buttonAction(sender:UIButton!)
{

    var btnsendtag:UIButton = sender
    if btnsendtag.tag == 22 {            
        //println("Button tapped tag 22")
    }
}

How to check whether mod_rewrite is enable on server?

This works on CentOS:

$ sudo httpd -M |grep rewrite_module

Should output rewrite_module (shared)

Chrome/jQuery Uncaught RangeError: Maximum call stack size exceeded

This problem happened with me when I used jQUery Fancybox inside a website with many others jQuery plugins. When I used the LightBox (site here) instead of Fancybox, the problem is gone.

Boolean Field in Oracle

I found this link useful.

Here is the paragraph highlighting some of the pros/cons of each approach.

The most commonly seen design is to imitate the many Boolean-like flags that Oracle's data dictionary views use, selecting 'Y' for true and 'N' for false. However, to interact correctly with host environments, such as JDBC, OCCI, and other programming environments, it's better to select 0 for false and 1 for true so it can work correctly with the getBoolean and setBoolean functions.

Basically they advocate method number 2, for efficiency's sake, using

  • values of 0/1 (because of interoperability with JDBC's getBoolean() etc.) with a check constraint
  • a type of CHAR (because it uses less space than NUMBER).

Their example:

create table tbool (bool char check (bool in (0,1));
insert into tbool values(0);
insert into tbool values(1);`

How to print the current Stack Trace in .NET without any exception?

There are two ways to do this. The System.Diagnostics.StackTrace() will give you a stack trace for the current thread. If you have a reference to a Thread instance, you can get the stack trace for that via the overloaded version of StackTrace().

You may also want to check out Stack Overflow question How to get non-current thread's stacktrace?.

Git ignore local file changes

If you dont want your local changes, then do below command to ignore(delete permanently) the local changes.

  • If its unstaged changes, then do checkout (git checkout <filename> or git checkout -- .)
  • If its staged changes, then first do reset (git reset <filename> or git reset) and then do checkout (git checkout <filename> or git checkout -- .)
  • If it is untracted files/folders (newly created), then do clean (git clean -fd)

If you dont want to loose your local changes, then stash it and do pull or rebase. Later merge your changes from stash.

  • Do git stash, and then get latest changes from repo git pull orign master or git rebase origin/master, and then merge your changes from stash git stash pop stash@{0}

Get timezone from users browser using moment(timezone).js

All current answers provide the offset differece at current time, not at a given date.

moment(date).utcOffset() returns the time difference in minutes between browser time and UTC at the date passed as argument (or today, if no date passed).

Here's a function to parse correct offset at the picked date: 

function getUtcOffset(date) {
  return moment(date)
    .subtract(
      moment(date).utcOffset(), 
      'minutes')
    .utc()
}

Can I embed a custom font in an iPhone application?

Swift, code way: (works also with swift 2.0)

Add the required fonts to your project (just like adding images, just drag to Xcode), make sure that they are targeted to your project
add this method and load custom fonts (recommended in appDelegate didFinishLaunchingWithOptions)

func loadFont(filePath: String) {

    let fontData = NSData(contentsOfFile: filePath)!

    let dataProvider = CGDataProviderCreateWithCFData(fontData)
    let cgFont = CGFontCreateWithDataProvider(dataProvider)!

    var error: Unmanaged<CFError>?
    if !CTFontManagerRegisterGraphicsFont(cgFont, &error) {
        let errorDescription: CFStringRef = CFErrorCopyDescription(error!.takeUnretainedValue())
        print("Unable to load font: %@", errorDescription, terminator: "")
    }

}

Use example:

if let fontPath = NSBundle.mainBundle().pathForResource("My-Font", ofType: "ttf"){
      loadFont(fontPath)
}

Use the font:

UIFont(name: "My-Font", size: 16.5)

warning: Insecure world writable dir /usr/local/bin in PATH, mode 040777

Am using Mountain Lion. What I did was Look for /usr/local and Get Info. On it there is Sharing and Permissions. Make sure that its only the user and Admin are the only ones who have read and write permissions. Anyone else should have read access only. That sorted my problem.

Its normally helpful is your Run disk utilities and repair permissions too.

How to execute shell command in Javascript

This depends entirely on the JavaScript environment. Please elaborate.

For example, in Windows Scripting, you do things like:

var shell = WScript.CreateObject("WScript.Shell");
shell.Run("command here");

Loop through all nested dictionary values?

Alternative iterative solution:

def myprint(d):
    stack = d.items()
    while stack:
        k, v = stack.pop()
        if isinstance(v, dict):
            stack.extend(v.iteritems())
        else:
            print("%s: %s" % (k, v))

How get the base URL via context path in JSF?

URLs are not resolved based on the file structure in the server side. URLs are resolved based on the real public web addresses of the resources in question. It's namely the webbrowser who has got to invoke them, not the webserver.

There are several ways to soften the pain:

JSF EL offers a shorthand to ${pageContext.request} in flavor of #{request}:

<li><a href="#{request.contextPath}/index.xhtml">Home</a></li>
<li><a href="#{request.contextPath}/about_us.xhtml">About us</a></li>

You can if necessary use <c:set> tag to make it yet shorter. Put it somewhere in the master template, it'll be available to all pages:

<c:set var="root" value="#{request.contextPath}/" />
...
<li><a href="#{root}index.xhtml">Home</a></li>
<li><a href="#{root}about_us.xhtml">About us</a></li>

JSF 2.x offers the <h:link> which can take a view ID relative to the context root in outcome and it will append the context path and FacesServlet mapping automatically:

<li><h:link value="Home" outcome="index" /></li>
<li><h:link value="About us" outcome="about_us" /></li>

HTML offers the <base> tag which makes all relative URLs in the document relative to this base. You could make use of it. Put it in the <h:head>.

<base href="#{request.requestURL.substring(0, request.requestURL.length() - request.requestURI.length())}#{request.contextPath}/" />
...
<li><a href="index.xhtml">Home</a></li>
<li><a href="about_us.xhtml">About us</a></li>

(note: this requires EL 2.2, otherwise you'd better use JSTL fn:substring(), see also this answer)

This should end up in the generated HTML something like as

<base href="http://example.com/webname/" />

Note that the <base> tag has a caveat: it makes all jump anchors in the page like <a href="#top"> relative to it as well! See also Is it recommended to use the <base> html tag? In JSF you could solve it like <a href="#{request.requestURI}#top">top</a> or <h:link value="top" fragment="top" />.

jQuery map vs. each

The each function iterates over an array, calling the supplied function once per element, and setting this to the active element. This:

function countdown() {
    alert(this + "..");
}

$([5, 4, 3, 2, 1]).each(countdown);

will alert 5.. then 4.. then 3.. then 2.. then 1..

Map on the other hand takes an array, and returns a new array with each element changed by the function. This:

function squared() {
    return this * this;
}

var s = $([5, 4, 3, 2, 1]).map(squared);

would result in s being [25, 16, 9, 4, 1].

What are abstract classes and abstract methods?

ABSTRACT CLASSES AND ABSTARCT METHODS FULL DESCRIPTION GO THROUGH IT

abstract method do not have body.A well defined method can't be declared abstract.

A class which has abstract method must be declared as abstract.

Abstract class can't be instantiated.

How can I get a resource content from a static context?

For system resources only!

Use

Resources.getSystem().getString(android.R.string.cancel)

You can use them everywhere in your application, even in static constants declarations!

Sonar properties files

You can define a Multi-module project structure, then you can set the configuration for sonar in one properties file in the root folder of your project, (Way #1)

Scanner only reads first word instead of line

Replace next() with nextLine():

String productDescription = input.nextLine();

How to search JSON data in MySQL?

I think...

Search partial value:

SELECT id FROM table_name WHERE field_name REGEXP '"key_name":"([^"])*key_word([^"])*"';

Search exact word:

SELECT id FROM table_name WHERE field_name RLIKE '"key_name":"[[:<:]]key_word[[:>:]]"';

How to do a subquery in LINQ?

Here's a subquery for you!

List<int> IdsToFind = new List<int>() {2, 3, 4};

db.Users
.Where(u => SqlMethods.Like(u.LastName, "%fra%"))
.Where(u =>
    db.CompanyRolesToUsers
    .Where(crtu => IdsToFind.Contains(crtu.CompanyRoleId))
    .Select(crtu =>  crtu.UserId)
    .Contains(u.Id)
)

Regarding this portion of the question:

predicateAnd = predicateAnd.And(c => c.LastName.Contains(
                                TextBoxLastName.Text.Trim()));

I strongly recommend extracting the string from the textbox before authoring the query. 

string searchString = TextBoxLastName.Text.Trim();
predicateAnd = predicateAnd.And(c => c.LastName.Contains( searchString));

You want to maintain good control over what gets sent to the database. In the original code, one possible reading is that an untrimmed string gets sent into the database for trimming - which is not good work for the database to be doing.

Laravel Eloquent - distinct() and count() not working properly together

This was working for me so Try This: $ad->getcodes()->distinct('pid')->count()

Get the difference between dates in terms of weeks, months, quarters, and years

Here's a solution: 

dates <- c("14.01.2013", "26.03.2014")

# Date format:
dates2 <- strptime(dates, format = "%d.%m.%Y")

dif <- diff(as.numeric(dates2)) # difference in seconds

dif/(60 * 60 * 24 * 7) # weeks
[1] 62.28571
dif/(60 * 60 * 24 * 30) # months
[1] 14.53333
dif/(60 * 60 * 24 * 30 * 3) # quartes
[1] 4.844444
dif/(60 * 60 * 24 * 365) # years
[1] 1.194521

determine DB2 text string length

From similar question DB2 - find and compare the lentgh of the value in a table field - add RTRIM since LENGTH will return length of column definition. This should be correct:

select * from table where length(RTRIM(fieldName))=10

UPDATE 27.5.2019: maybe on older db2 versions the LENGTH function returned the length of column definition. On db2 10.5 I have tried the function and it returns data length, not column definition length:

select fieldname
, length(fieldName) len_only
, length(RTRIM(fieldName)) len_rtrim
from (values (cast('1234567890  ' as varchar(30)) )) 
as tab(fieldName)

FIELDNAME                      LEN_ONLY    LEN_RTRIM
------------------------------ ----------- -----------
1234567890                              12          10

One can test this by using this term: 

where length(fieldName)!=length(rtrim(fieldName))

How to process images of a video, frame by frame, in video streaming using OpenCV and Python

This is how I would start to solve this:

  1. Create a video writer:

    import cv2.cv as cv
videowriter = cv.CreateVideoWriter( filename, fourcc, fps, frameSize)

    Check here for valid parameters

  2. Loop to retrieve[1] and write the frames:

    cv.WriteFrame( videowriter, frame )

    WriteFrame doc

[1] zenpoy already pointed in the correct direction. You just need to know that you can retrieve images from a webcam or a file :-)

Hopefully I understood the requirements correct.

What is the preferred Bash shebang?

I recommend using:

#!/bin/bash

It's not 100% portable (some systems place bash in a location other than /bin), but the fact that a lot of existing scripts use #!/bin/bash pressures various operating systems to make /bin/bash at least a symlink to the main location.

The alternative of:

#!/usr/bin/env bash

has been suggested -- but there's no guarantee that the env command is in /usr/bin (and I've used systems where it isn't). Furthermore, this form will use the first instance of bash in the current users $PATH, which might not be a suitable version of the bash shell.

(But /usr/bin/env should work on any reasonably modern system, either because env is in /usr/bin or because the system does something to make it work. The system I referred to above was SunOS 4, which I probably haven't used in about 25 years.)

If you need a script to run on a system that doesn't have /bin/bash, you can modify the script to point to the correct location (that's admittedly inconvenient).

I've discussed the tradeoffs in greater depth in my answer to this question.

A somewhat obscure update: One system I use, Termux, a desktop-Linux-like layer that runs under Android, doesn't have /bin/bash (bash is /data/data/com.termux/files/usr/bin/bash) -- but it has special handling to support #!/bin/bash.

Having Django serve downloadable files

I have faced the same problem more then once and so implemented using xsendfile module and auth view decorators the django-filelibrary. Feel free to use it as inspiration for your own solution.

https://github.com/danielsokolowski/django-filelibrary

Check if current date is between two dates Oracle SQL

TSQL: Dates- need to look for gaps in dates between Two Date

select
distinct
e1.enddate,
e3.startdate,
DATEDIFF(DAY,e1.enddate,e3.startdate)-1 as [Datediff]
from #temp e1 
   join #temp e3 on e1.enddate < e3.startdate          
       /* Finds the next start Time */
and e3.startdate = (select min(startdate) from #temp e5
where e5.startdate > e1.enddate)
and not exists (select *  /* Eliminates e1 rows if it is overlapped */
from #temp e5 
where e5.startdate < e1.enddate and e5.enddate > e1.enddate);

Select dropdown with fixed width cutting off content in IE

similar solution can be found here using jquery to set the auto width when focus (or mouseenter) and set the orignal width back when blur (or mouseleave) http://css-tricks.com/select-cuts-off-options-in-ie-fix/.

Running an outside program (executable) in Python?

Use subprocess, it is a smaller module so it runs the .exe quicker.

import subprocess
subprocess.Popen([r"U:\Year 8\kerbal space program\KSP.exe"])

How to change Angular CLI favicon

Ok, here in 2020 on 9.1.12. I don't understand why exactly this process is so difficult. I followed almost every post above and none of them worked for me.

What DID work was this: Totally removing the favicon reference in index.html. It's totally counter intuitive but it works. You DON'T need to put it in the assets folder. I tried all of that but unfortunately none of those suggestions worked.

index.html

<!-- <link rel="icon" type="image/x-icon" href="favicon.ico"> DELETE THIS -->

angular.json

"assets": [
  "src/favicon.ico",
  "src/assets"
],

and when I run ng build --prod, the favicon is there. Displays on my live server too.

Bootstrap 3 - 100% height of custom div inside column

I was just looking for a smiliar issue and I found this:

.div{
  height : 100vh;
}

more info

vw: 1/100th viewport width
vh: 1/100th viewport height
vmin: 1/100th of the smallest side
vmax: 1/100th of the largest side

Adding +1 to a variable inside a function

You could also pass points to the function: Small example:

def test(points):
    addpoint = raw_input ("type ""add"" to add a point")
    if addpoint == "add":
        points = points + 1
    else:
        print "asd"
    return points;
if __name__ == '__main__':
    points = 0
    for i in range(10):
        points = test(points)
        print points

How to fix error Base table or view not found: 1146 Table laravel relationship table?

The main problem for causing your table unable to migrate, is that you have running query on your "AppServiceProvider.php" try to check your serviceprovider and disable code for the meantime, and run php artisan migrate

Adding/removing items from a JavaScript object with jQuery

Adding an object in a json array

var arrList = [];
var arr = {};   
arr['worker_id'] = worker_id;
arr['worker_nm'] = worker_nm;
arrList.push(arr);

Removing an object from a json

It worker for me.

  arrList = $.grep(arrList, function (e) { 

        if(e.worker_id == worker_id) {
            return false;
        } else {
            return true;
        }
    });

It returns an array without that object.

Hope it helps.

Java Equivalent of C# async/await?

Java doesn't have direct equivalent of C# language feature called async/await, however there's a different approach to the problem that async/await tries to solve. It's called project Loom, which will provide virtual threads for high-throughput concurrency. It will be available in some future version of OpenJDK.

This approach also solves "colored function problem" that async/await has.

Similar feature can be also found in Golang (goroutines).

How to see top processes sorted by actual memory usage?

How to total up used memory by process name:

Sometimes even looking at the biggest single processes there is still a lot of used memory unaccounted for. To check if there are a lot of the same smaller processes using the memory you can use a command like the following which uses awk to sum up the total memory used by processes of the same name:

ps -e -orss=,args= |awk '{print $1 " " $2 }'| awk '{tot[$2]+=$1;count[$2]++} END {for (i in tot) {print tot[i],i,count[i]}}' | sort -n

e.g. output

9344 docker 1
9948 nginx: 4
22500 /usr/sbin/NetworkManager 1
24704 sleep 69
26436 /usr/sbin/sshd 15
34828 -bash 19
39268 sshd: 10
58384 /bin/su 28
59876 /bin/ksh 29
73408 /usr/bin/python 2
78176 /usr/bin/dockerd 1
134396 /bin/sh 84
5407132 bin/naughty_small_proc 1432
28061916 /usr/local/jdk/bin/java 7

How to set a CMake option() at command line

An additional option is to go to your build folder and use the command ccmake .

This is like the GUI but terminal based. This obviously won't help with an installation script but at least it can be run without a UI.

The one warning I have is it won't let you generate sometimes when you have warnings. if that is the case, exit the interface and call cmake .

json.decoder.JSONDecodeError: Expecting value: line 1 column 1 (char 0)

json.loads() takes a JSON encoded string, not a filename. You want to use json.load() (no s) instead and pass in an open file object:

with open('/Users/JoshuaHawley/clean1.txt') as jsonfile:
    data = json.load(jsonfile)

The open() command produces a file object that json.load() can then read from, to produce the decoded Python object for you. The with statement ensures that the file is closed again when done.

The alternative is to read the data yourself and then pass it into json.loads().

What is sys.maxint in Python 3?

If you are looking for a number that is bigger than all others:

Method 1:

float('inf')

Method 2:

import sys
max = sys.maxsize

If you are looking for a number that is smaller than all others:

Method 1:

float('-inf')

Method 2:

import sys
min = -sys.maxsize - 1

Method 1 works in both Python2 and Python3. Method 2 works in Python3. I have not tried Method 2 in Python2.

Truncate (not round) decimal places in SQL Server

 
SELECT Cast(Round(123.456,2,1) as decimal(18,2))

NameError: global name 'xrange' is not defined in Python 3

I agree with the last answer.But there is another way to solve this problem.You can download the package named future,such as pip install future.And in your .py file input this "from past.builtins import xrange".This method is for the situation that there are many xranges in your file.

What does getActivity() mean?

Two likely definitions:

Passing ArrayList from servlet to JSP

request.getAttribute("servletName") method will return Object that you need to cast to ArrayList

ArrayList<Category> list =new ArrayList<Category>();
//storing passed value from jsp
list = (ArrayList<Category>)request.getAttribute("servletName");

NSRange from Swift Range?

For cases like the one you described, I found this to work. It's relatively short and sweet:

 let attributedString = NSMutableAttributedString(string: "follow the yellow brick road") //can essentially come from a textField.text as well (will need to unwrap though)
 let text = "follow the yellow brick road"
 let str = NSString(string: text) 
 let theRange = str.rangeOfString("yellow")
 attributedString.addAttribute(NSForegroundColorAttributeName, value: UIColor.yellowColor(), range: theRange)

Using Spring 3 autowire in a standalone Java application

A nice solution would be to do following,

import org.springframework.beans.BeansException;
import org.springframework.context.ApplicationContext;
import org.springframework.context.ApplicationContextAware;
import org.springframework.stereotype.Component;

@Component
public class SpringContext implements ApplicationContextAware {

private static ApplicationContext context;

/**
 * Returns the Spring managed bean instance of the given class type if it exists.
 * Returns null otherwise.
 * @param beanClass
 * @return
 */
public static <T extends Object> T getBean(Class<T> beanClass) {
    return context.getBean(beanClass);
}

@Override
public void setApplicationContext(ApplicationContext context) throws BeansException {

    // store ApplicationContext reference to access required beans later on
    SpringContext.context = context;
}
}

Then you can use it like:

YourClass yourClass = SpringContext.getBean(YourClass.class);

I found this very nice solution in the following website: https://confluence.jaytaala.com/pages/viewpage.action?pageId=18579463

How to support UTF-8 encoding in Eclipse

Just right click the Project -- Properties and select Resource on the left side menu.

You can now change the Text-file encoding to whatever you wish.

How to launch an application from a browser?

The correct method is to register your custom URL Protocol in windows registry as follows:

[HKEY_CLASSES_ROOT\customurl]
@="Description here"
"URL Protocol"=""

[HKEY_CLASSES_ROOT\customurl\shell]

[HKEY_CLASSES_ROOT\customurl\shell\open]

[HKEY_CLASSES_ROOT\customurl\shell\open\command]
@="\"C:\\Path To Your EXE\\ExeName.exe\" \"%1\""

Once the above keys and values are added, from the web page, just call "customurl:\\parameter1=xxx&parameter2=xxx" . You will receive the entire url as the argument in exe, which you need to process inside your exe. Change 'customurl' with the text of your choice.

Import CSV file as a pandas DataFrame

You can use the csv module found in the python standard library to manipulate CSV files.

example:

import csv
with open('some.csv', 'rb') as f:
    reader = csv.reader(f)
    for row in reader:
        print row

Python - Convert a bytes array into JSON format

You can simply use,

import json

json.loads(my_bytes_value)

Find when a file was deleted in Git

You can find the last commit which deleted file as follows:

git rev-list -n 1 HEAD -- [file_path]

Further information is available here

Find the version of an installed npm package

 
npm info YOUR_PACKAGE version

e.g.

npm info grunt version
0.4.5

Batch Files - Error Handling

I guess this feature was added since the OP but for future reference errors that would output in the command window can be redirected to a file independent of the standard output

command 1> file - Write the standard output of command to file

command 2> file - Write the standard error of command to file

JavaScript - Use variable in string match

Although the match function doesn't accept string literals as regex patterns, you can use the constructor of the RegExp object and pass that to the String.match function:

var re = new RegExp(yyy, 'g');
xxx.match(re);

Any flags you need (such as /g) can go into the second parameter.

How to select from subquery using Laravel Query Builder?

In addition to @delmadord's answer and your comments:

Currently there is no method to create subquery in FROM clause, so you need to manually use raw statement, then, if necessary, you will merge all the bindings:

$sub = Abc::where(..)->groupBy(..); // Eloquent Builder instance

$count = DB::table( DB::raw("({$sub->toSql()}) as sub") )
    ->mergeBindings($sub->getQuery()) // you need to get underlying Query Builder
    ->count();

Mind that you need to merge bindings in correct order. If you have other bound clauses, you must put them after mergeBindings:

$count = DB::table( DB::raw("({$sub->toSql()}) as sub") )

    // ->where(..) wrong

    ->mergeBindings($sub->getQuery()) // you need to get underlying Query Builder

    // ->where(..) correct

    ->count();

Login failed for user 'DOMAIN\MACHINENAME$'

NETWORK SERVICE and LocalSystem will authenticate themselves always as the correpsonding account locally (builtin\network service and builtin\system) but both will authenticate as the machine account remotely.

If you see a failure like Login failed for user 'DOMAIN\MACHINENAME$' it means that a process running as NETWORK SERVICE or as LocalSystem has accessed a remote resource, has authenticated itself as the machine account and was denied authorization.

Typical example would be an ASP application running in an app pool set to use NETWORK SERVICE credential and connecting to a remote SQL Server: the app pool will authenticate as the machine running the app pool, and is this machine account that needs to be granted access.

When access is denied to a machine account, then access must be granted to the machine account. If the server refuses to login 'DOMAIN\MACHINE$', then you must grant login rights to 'DOMAIN\MACHINE$' not to NETWORK SERVICE. Granting access to NETWORK SERVICE would allow a local process running as NETWORK SERVICE to connect, not a remote one, since the remote one will authenticate as, you guessed, DOMAIN\MACHINE$.

If you expect the asp application to connect to the remote SQL Server as a SQL login and you get exceptions about DOMAIN\MACHINE$ it means you use Integrated Security in the connection string. If this is unexpected, it means you screwed up the connection strings you use.

Multiple aggregations of the same column using pandas GroupBy.agg()

You can simply pass the functions as a list:

In [20]: df.groupby("dummy").agg({"returns": [np.mean, np.sum]})
Out[20]:         
           mean       sum
dummy                    
1      0.036901  0.369012

or as a dictionary:

In [21]: df.groupby('dummy').agg({'returns':
                                  {'Mean': np.mean, 'Sum': np.sum}})
Out[21]: 
        returns          
           Mean       Sum
dummy                    
1      0.036901  0.369012

Print list without brackets in a single row

This is what you need

", ".join(names)

Selecting/excluding sets of columns in pandas

Here's how to create a copy of a DataFrame excluding a list of columns:

df = pd.DataFrame(np.random.randn(100, 4), columns=list('ABCD'))
df2 = df.drop(['B', 'D'], axis=1)

But be careful! You mention views in your question, suggesting that if you changed df, you'd want df2 to change too. (Like a view would in a database.)

This method doesn't achieve that:

>>> df.loc[0, 'A'] = 999 # Change the first value in df
>>> df.head(1)
     A         B         C         D
0  999 -0.742688 -1.980673 -0.920133
>>> df2.head(1) # df2 is unchanged. It's not a view, it's a copy!
          A         C
0  0.251262 -1.980673

Note also that this is also true of @piggybox's method. (Although that method is nice and slick and Pythonic. I'm not doing it down!!)

For more on views vs. copies see this SO answer and this part of the Pandas docs which that answer refers to.

Can I set up HTML/Email Templates with ASP.NET?

If you are able to allow the ASPNET and associated users permission to read & write a file, you can easily use an HTML file with standard String.Format() placeholders ({0}, {1:C}, etc.) to accomplish this.

Merely read in the file, as a string, using classes from the System.IO namespace. Once you have that string, pass it as the first argument to String.Format(), and provide the parameters.

Keep that string around, and use it as the body of the e-mail, and you're essentially done. We do this on dozens of (admittedly small) sites today, and have had no issues.

I should note that this works best if (a) you're not sending zillions of e-mails at a time, (b) you're not personalizing each e-mail (otherwise you eat up a ton of strings) and (c) the HTML file itself is relatively small.

Advantages of std::for_each over for loop

Personally, any time I'd need to go out of my way to use std::for_each (write special-purpose functors / complicated boost::lambdas), I find BOOST_FOREACH and C++0x's range-based for clearer:

BOOST_FOREACH(Monster* m, monsters) {
     if (m->has_plan()) 
         m->act();
}

vs

std::for_each(monsters.begin(), monsters.end(), 
  if_then(bind(&Monster::has_plan, _1), 
    bind(&Monster::act, _1)));

Set inputType for an EditText Programmatically?

 
password.setInputType(InputType.TYPE_CLASS_TEXT |
InputType.TYPE_TEXT_VARIATION_PASSWORD);

also you have to be careful that cursor moves to the starting point of the editText after this function is called, so make sure that you move cursor to the end point again.

How to change navigation bar color in iOS 7 or 6?

// In ios 7 :- 

[self.navigationController.navigationBar setBarTintColor:[UIColor yellowColor]];

// In ios 6 :- 

[self.navigationController.navigationBar setTintColor:[UIColor yellowColor]];

PDF Blob - Pop up window not showing content

problem is, it is not converted to proper format. Use function "printPreview(binaryPDFData)" to get print preview dialog of binary pdf data. you can comment script part if you don't want print dialog open.

printPreview = (data, type = 'application/pdf') => {
    let blob = null;
    blob = this.b64toBlob(data, type);
    const blobURL = URL.createObjectURL(blob);
    const theWindow = window.open(blobURL);
    const theDoc = theWindow.document;
    const theScript = document.createElement('script');
    function injectThis() {
        window.print();
    }
    theScript.innerHTML = `window.onload = ${injectThis.toString()};`;
    theDoc.body.appendChild(theScript);
};

b64toBlob = (content, contentType) => {
    contentType = contentType || '';
    const sliceSize = 512;
     // method which converts base64 to binary
    const byteCharacters = window.atob(content); 

    const byteArrays = [];
    for (let offset = 0; offset < byteCharacters.length; offset += sliceSize) {
        const slice = byteCharacters.slice(offset, offset + sliceSize);
        const byteNumbers = new Array(slice.length);
        for (let i = 0; i < slice.length; i++) {
            byteNumbers[i] = slice.charCodeAt(i);
        }
        const byteArray = new Uint8Array(byteNumbers);
        byteArrays.push(byteArray);
    }
    const blob = new Blob(byteArrays, {
        type: contentType
    }); // statement which creates the blob
    return blob;
};

Compilation error: stray ‘\302’ in program etc

I noticed an issue in using the above tr command. The tr command COMPLETELY removes the "smart quotes". It would be better to replace the "smart quotes" with something like this.

This will give you a quick preview of what will be replaced.

sed s/[”“]/'"'/g File.txt

This will do the replacements and put the replacement in a new file called WithoutSmartQuotes.txt.

sed s/[”“]/'"'/g File.txt > WithoutSmartQuotes.txt

This will overwrite the original file.

sed -i ".bk" s/[”“]/'"'/g File.txt

http://developmentality.wordpress.com/2010/10/11/how-to-remove-smart-quotes-from-a-text-file/

filename and line number of Python script

 
import inspect    

file_name = __FILE__
current_line_no = inspect.stack()[0][2]
current_function_name = inspect.stack()[0][3]

#Try printing inspect.stack() you can see current stack and pick whatever you want

How do I check whether a checkbox is checked in jQuery?

This function is alternative and stable:

$('#isAgeSelected').context.checked
(return True/False)

Example: 

if($('#isAgeSelected').context.checked){ //if Checkbox is checked then bla bla..
    /*.....*/
}else{
    /*.....*/
}

Find records with a date field in the last 24 hours

There are so many ways to do this. The listed ones work great, but here's another way if you have a datetime field:

SELECT [fields] 
FROM [table] 
WHERE timediff(now(), my_datetime_field) < '24:00:00'

timediff() returns a time object, so don't make the mistake of comparing it to 86400 (number of seconds in a day), or your output will be all kinds of wrong.

HTTP Status 500 - Servlet.init() for servlet Dispatcher threw exception

 
<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
    <modelVersion>4.0.0</modelVersion>
    <groupId>teste4</groupId>
    <artifactId>teste4</artifactId>
    <version>0.0.1-SNAPSHOT</version>
    <packaging>war</packaging>

    <repositories>
        <repository>
            <id>prime-repo</id>
            <name>PrimeFaces Maven Repository</name>
            <url>http://repository.primefaces.org</url>
            <layout>default</layout>
        </repository>
    </repositories>



    <dependencies>
        <dependency>
            <groupId>com.sun.faces</groupId>
            <artifactId>jsf-impl</artifactId>
            <version>2.2.4</version>
        </dependency>


        <dependency>
            <groupId>com.sun.faces</groupId>
            <artifactId>jsf-api</artifactId>
            <version>2.2.4</version>
        </dependency>



        <dependency>
            <groupId>javax.servlet</groupId>
            <artifactId>servlet-api</artifactId>
            <version>2.5</version>
        </dependency>
        <dependency>
            <groupId>javax.servlet</groupId>
            <artifactId>jstl</artifactId>
            <version>1.2</version>
        </dependency>
        <dependency>
            <groupId>org.primefaces</groupId>
            <artifactId>primefaces</artifactId>
            <version>4.0</version>
        </dependency>
        <dependency>
            <groupId>org.primefaces.themes</groupId>
            <artifactId>bootstrap</artifactId>
            <version>1.0.9</version>
        </dependency>
        <dependency>
            <groupId>commons-fileupload</groupId>
            <artifactId>commons-fileupload</artifactId>
            <version>1.3</version>
        </dependency>

        <dependency>
            <groupId>mysql</groupId>
            <artifactId>mysql-connector-java</artifactId>
            <version>5.1.27</version>
        </dependency>

        <dependency>
            <groupId>org.hibernate</groupId>
            <artifactId>hibernate-entitymanager</artifactId>
            <version>4.2.7.Final</version>
        </dependency>

    </dependencies>


</project>

"code ." Not working in Command Line for Visual Studio Code on OSX/Mac

For that to work there needs to be an executable named 'code' in your bash path, which some installers add for you, but this one apparently did not. The best way to do this could be to add a symlink to the visual studio code app in your /usr/local/bin folder. You can do this by using a command like the following in your terminal.

ln -s "/Path/To/Visual Studio Code" "/usr/local/bin/code"

You will likely need to put sudo in front of that to have the permissions for it to complete successfully.

Tool for sending multipart/form-data request

UPDATE: I have created a video on sending multipart/form-data requests to explain this better.

Actually, Postman can do this. Here is a screenshot

Newer version : Screenshot captured from postman chrome extension enter image description here

Another version

enter image description here

Older version

enter image description here

Make sure you check the comment from @maxkoryukov

Be careful with explicit Content-Type header. Better - do not set it's value, the Postman is smart enough to fill this header for you. BUT, if you want to set the Content-Type: multipart/form-data - do not forget about boundary field.

How to clear form after submit in Angular 2?

As of Angular2 RC5, myFormGroup.reset() seems to do the trick.

Replace all occurrences of a String using StringBuilder?

Here is an in place replaceAll that will modify the passed in StringBuilder. I thought that I would post this as I was looking to do replaceAll with out creating a new String.

public static void replaceAll(StringBuilder sb, Pattern pattern, String replacement) {
    Matcher m = pattern.matcher(sb);
    while(m.find()) {
        sb.replace(m.start(), m.end(), replacement);
    }
}

I was shocked how simple the code to do this was (for some reason I thought changing the StringBuilder while using the matcher would throw of the group start/end but it does not).

This is probably faster than the other regex answers because the pattern is already compiled and your not creating a new String but I didn't do any benchmarking.

Write a file on iOS

Your code is working at my end, i have just tested it. Where are you checking your changes? Use Documents directory path. To get path -

NSLog(@"%@",documentsDirectory);

and copy path from console and then open finder and press Cmd+shift+g and paste path here and then open your file

What are all the user accounts for IIS/ASP.NET and how do they differ?

This is a very good question and sadly many developers don't ask enough questions about IIS/ASP.NET security in the context of being a web developer and setting up IIS. So here goes....

To cover the identities listed:

IIS_IUSRS:

This is analogous to the old IIS6 IIS_WPG group. It's a built-in group with it's security configured such that any member of this group can act as an application pool identity.

IUSR:

This account is analogous to the old IUSR_<MACHINE_NAME> local account that was the default anonymous user for IIS5 and IIS6 websites (i.e. the one configured via the Directory Security tab of a site's properties).

For more information about IIS_IUSRS and IUSR see:

Understanding Built-In User and Group Accounts in IIS 7

DefaultAppPool:

If an application pool is configured to run using the Application Pool Identity feature then a "synthesised" account called IIS AppPool\<pool name> will be created on the fly to used as the pool identity. In this case there will be a synthesised account called IIS AppPool\DefaultAppPool created for the life time of the pool. If you delete the pool then this account will no longer exist. When applying permissions to files and folders these must be added using IIS AppPool\<pool name>. You also won't see these pool accounts in your computers User Manager. See the following for more information:

Application Pool Identities

ASP.NET v4.0: -

This will be the Application Pool Identity for the ASP.NET v4.0 Application Pool. See DefaultAppPool above.

NETWORK SERVICE: -

The NETWORK SERVICE account is a built-in identity introduced on Windows 2003. NETWORK SERVICE is a low privileged account under which you can run your application pools and websites. A website running in a Windows 2003 pool can still impersonate the site's anonymous account (IUSR_ or whatever you configured as the anonymous identity).

In ASP.NET prior to Windows 2008 you could have ASP.NET execute requests under the Application Pool account (usually NETWORK SERVICE). Alternatively you could configure ASP.NET to impersonate the site's anonymous account via the <identity impersonate="true" /> setting in web.config file locally (if that setting is locked then it would need to be done by an admin in the machine.config file).

Setting <identity impersonate="true"> is common in shared hosting environments where shared application pools are used (in conjunction with partial trust settings to prevent unwinding of the impersonated account).

In IIS7.x/ASP.NET impersonation control is now configured via the Authentication configuration feature of a site. So you can configure to run as the pool identity, IUSR or a specific custom anonymous account.

LOCAL SERVICE:

The LOCAL SERVICE account is a built-in account used by the service control manager. It has a minimum set of privileges on the local computer. It has a fairly limited scope of use:

LocalService Account

LOCAL SYSTEM:

You didn't ask about this one but I'm adding for completeness. This is a local built-in account. It has fairly extensive privileges and trust. You should never configure a website or application pool to run under this identity.

LocalSystem Account

In Practice:

In practice the preferred approach to securing a website (if the site gets its own application pool - which is the default for a new site in IIS7's MMC) is to run under Application Pool Identity. This means setting the site's Identity in its Application Pool's Advanced Settings to Application Pool Identity:

enter image description here

In the website you should then configure the Authentication feature:

enter image description here

Right click and edit the Anonymous Authentication entry:

enter image description here

Ensure that "Application pool identity" is selected:

enter image description here

When you come to apply file and folder permissions you grant the Application Pool identity whatever rights are required. For example if you are granting the application pool identity for the ASP.NET v4.0 pool permissions then you can either do this via Explorer:

enter image description here

Click the "Check Names" button:

enter image description here

Or you can do this using the ICACLS.EXE utility:

icacls c:\wwwroot\mysite /grant "IIS AppPool\ASP.NET v4.0":(CI)(OI)(M)

...or...if you site's application pool is called BobsCatPicBlogthen:

icacls c:\wwwroot\mysite /grant "IIS AppPool\BobsCatPicBlog":(CI)(OI)(M)

I hope this helps clear things up.

Update:

I just bumped into this excellent answer from 2009 which contains a bunch of useful information, well worth a read:

The difference between the 'Local System' account and the 'Network Service' account?

Converting newline formatting from Mac to Windows

Windows uses carriage return + line feed for newline:

\r\n

Unix only uses Line feed for newline:

\n

In conclusion, simply replace every occurence of \n by \r\n.
Both unix2dos and dos2unix are not by default available on Mac OSX.
Fortunately, you can simply use Perl or sed to do the job:

sed -e 's/$/\r/' inputfile > outputfile                # UNIX to DOS  (adding CRs)
sed -e 's/\r$//' inputfile > outputfile                # DOS  to UNIX (removing CRs)
perl -pe 's/\r\n|\n|\r/\r\n/g' inputfile > outputfile  # Convert to DOS
perl -pe 's/\r\n|\n|\r/\n/g'   inputfile > outputfile  # Convert to UNIX
perl -pe 's/\r\n|\n|\r/\r/g'   inputfile > outputfile  # Convert to old Mac

Code snippet from:
http://en.wikipedia.org/wiki/Newline#Conversion_utilities

converting json to string in python

json.dumps() is much more than just making a string out of a Python object, it would always produce a valid JSON string (assuming everything inside the object is serializable) following the Type Conversion Table.

For instance, if one of the values is None, the str() would produce an invalid JSON which cannot be loaded: 

>>> data = {'jsonKey': None}
>>> str(data)
"{'jsonKey': None}"
>>> json.loads(str(data))
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
  File "/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/json/__init__.py", line 338, in loads
    return _default_decoder.decode(s)
  File "/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/json/decoder.py", line 366, in decode
    obj, end = self.raw_decode(s, idx=_w(s, 0).end())
  File "/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/json/decoder.py", line 382, in raw_decode
    obj, end = self.scan_once(s, idx)
ValueError: Expecting property name: line 1 column 2 (char 1)

But the dumps() would convert None into null making a valid JSON string that can be loaded:

>>> import json
>>> data = {'jsonKey': None}
>>> json.dumps(data)
'{"jsonKey": null}'
>>> json.loads(json.dumps(data))
{u'jsonKey': None}

Reordering arrays

Change 2 to 1 as the first parameter in the splice call when removing the element:

var tmp = playlist.splice(1, 1);
playlist.splice(2, 0, tmp[0]);

Index of Currently Selected Row in DataGridView

 
dataGridView1.SelectedRows[0].Index;

Here find all about datagridview C# datagridview tutorial

Lynda

recursion versus iteration

Besides being slower, recursion can also result in stack overflow errors depending on how deep it goes.

How to resolve "git did not exit cleanly (exit code 128)" error on TortoiseGit?

An quick solution would be to create a new local directory for example c:\git_2014, In this directory rightklick and choose Git Clone

How could I convert data from string to long in c#

long is internally represented as System.Int64 which is a 64-bit signed integer. The value you have taken "1100.25" is actually decimal and not integer hence it can not be converted to long.

You can use:

String strValue = "1100.25";
decimal lValue = Convert.ToDecimal(strValue);

to convert it to decimal value

Pointer to 2D arrays in C

Both your examples are equivalent. However, the first one is less obvious and more "hacky", while the second one clearly states your intention.

int (*pointer)[280];
pointer = tab1;

pointer points to an 1D array of 280 integers. In your assignment, you actually assign the first row of tab1. This works since you can implicitly cast arrays to pointers (to the first element).

When you are using pointer[5][12], C treats pointer as an array of arrays (pointer[5] is of type int[280]), so there is another implicit cast here (at least semantically).

In your second example, you explicitly create a pointer to a 2D array:

int (*pointer)[100][280];
pointer = &tab1;

The semantics are clearer here: *pointer is a 2D array, so you need to access it using (*pointer)[i][j].

Both solutions use the same amount of memory (1 pointer) and will most likely run equally fast. Under the hood, both pointers will even point to the same memory location (the first element of the tab1 array), and it is possible that your compiler will even generate the same code.

The first solution is "more advanced" since one needs quite a deep understanding on how arrays and pointers work in C to understand what is going on. The second one is more explicit.

System.web.mvc missing

In my case I had all of the proper references in my project. I found that by building the solution the nuget packages were automatically restored.

Tkinter: How to use threads to preventing main event loop from "freezing"

I have used RxPY which has some nice threading functions to solve this in a fairly clean manner. No queues, and I have provided a function that runs on the main thread after completion of the background thread. Here is a working example:

import rx
from rx.scheduler import ThreadPoolScheduler
import time
import tkinter as tk

class UI:
   def __init__(self):
      self.root = tk.Tk()
      self.pool_scheduler = ThreadPoolScheduler(1) # thread pool with 1 worker thread
      self.button = tk.Button(text="Do Task", command=self.do_task).pack()

   def do_task(self):
      rx.empty().subscribe(
         on_completed=self.long_running_task, 
         scheduler=self.pool_scheduler
      )

   def long_running_task(self):
      # your long running task here... eg:
      time.sleep(3)
      # if you want a callback on the main thread:
      self.root.after(5, self.on_task_complete)

   def on_task_complete(self):
       pass # runs on main thread

if __name__ == "__main__":
    ui = UI()
    ui.root.mainloop()

Another way to use this construct which might be cleaner (depending on preference):

tk.Button(text="Do Task", command=self.button_clicked).pack()

...

def button_clicked(self):

   def do_task(_):
      time.sleep(3) # runs on background thread
             
   def on_task_done():
      pass # runs on main thread

   rx.just(1).subscribe(
      on_next=do_task, 
      on_completed=lambda: self.root.after(5, on_task_done), 
      scheduler=self.pool_scheduler
   )

How do you rename a Git tag?

This wiki page has this interesting one-liner, which reminds us that we can push several refs:

git push origin refs/tags/<old-tag>:refs/tags/<new-tag> :refs/tags/<old-tag> && git tag -d <old-tag>

and ask other cloners to do git pull --prune --tags

So the idea is to push:

  • <new-tag> for every commits referenced by <old-tag>: refs/tags/<old-tag>:refs/tags/<new-tag>,
  • the deletion of <old-tag>: :refs/tags/<old-tag>

See as an example "Change naming convention of tags inside a git repository?".

how to count length of the JSON array element

First, there is no such thing as a JSON object. JSON is a string format that can be used as a representation of a Javascript object literal.

Since JSON is a string, Javascript will treat it like a string, and not like an object (or array or whatever you are trying to use it as.)

Here is a good JSON reference to clarify this difference:

http://benalman.com/news/2010/03/theres-no-such-thing-as-a-json/

So if you need accomplish the task mentioned in your question, you must convert the JSON string to an object or deal with it as a string, and not as a JSON array. There are several libraries to accomplish this. Look at http://www.json.org/js.html for a reference.

What is the use of a cursor in SQL Server?

Cursor might used for retrieving data row by row basis.its act like a looping statement(ie while or for loop). To use cursors in SQL procedures, you need to do the following: 1.Declare a cursor that defines a result set. 2.Open the cursor to establish the result set. 3.Fetch the data into local variables as needed from the cursor, one row at a time. 4.Close the cursor when done.

for ex:

declare @tab table
(
Game varchar(15),
Rollno varchar(15)
)
insert into @tab values('Cricket','R11')
insert into @tab values('VollyBall','R12')

declare @game  varchar(20)
declare @Rollno varchar(20)

declare cur2 cursor for select game,rollno from @tab 

open cur2

fetch next from cur2 into @game,@rollno

WHILE   @@FETCH_STATUS = 0   
begin

print @game

print @rollno

FETCH NEXT FROM cur2 into @game,@rollno

end

close cur2

deallocate cur2

Where is the web server root directory in WAMP?

Here's how I get there using Version 3.0.6 on Windows

How can I round a number in JavaScript? .toFixed() returns a string?

You can simply use a '+' to convert the result to a number.

var x = 22.032423;
x = +x.toFixed(2); // x = 22.03

Android ACTION_IMAGE_CAPTURE Intent

It is very simple to solve this problem with Activity Result Code Simple try this method 

if (reqCode == RECORD_VIDEO) {
   if(resCode == RESULT_OK) {
       if (uri != null) {
           compress();
       }
    } else if(resCode == RESULT_CANCELED && data!=null){
       Toast.makeText(MainActivity.this,"No Video Recorded",Toast.LENGTH_SHORT).show();
   }
}

Capturing browser logs with Selenium WebDriver using Java

I assume it is something in the lines of:

import org.openqa.selenium.WebDriver;
import org.openqa.selenium.chrome.ChromeDriver;
import org.openqa.selenium.logging.LogEntries;
import org.openqa.selenium.logging.LogEntry;
import org.openqa.selenium.logging.LogType;
import org.openqa.selenium.logging.LoggingPreferences;
import org.openqa.selenium.remote.CapabilityType;
import org.openqa.selenium.remote.DesiredCapabilities;
import org.testng.annotations.AfterMethod;
import org.testng.annotations.BeforeMethod;
import org.testng.annotations.Test;

public class ChromeConsoleLogging {
    private WebDriver driver;


    @BeforeMethod
    public void setUp() {
        System.setProperty("webdriver.chrome.driver", "c:\\path\\to\\chromedriver.exe");        
        DesiredCapabilities caps = DesiredCapabilities.chrome();
        LoggingPreferences logPrefs = new LoggingPreferences();
        logPrefs.enable(LogType.BROWSER, Level.ALL);
        caps.setCapability(CapabilityType.LOGGING_PREFS, logPrefs);
        driver = new ChromeDriver(caps);
    }

    @AfterMethod
    public void tearDown() {
        driver.quit();
    }

    public void analyzeLog() {
        LogEntries logEntries = driver.manage().logs().get(LogType.BROWSER);
        for (LogEntry entry : logEntries) {
            System.out.println(new Date(entry.getTimestamp()) + " " + entry.getLevel() + " " + entry.getMessage());
            //do something useful with the data
        }
    }

    @Test
    public void testMethod() {
        driver.get("http://mypage.com");
        //do something on page
        analyzeLog();
    }
}

Source : Get chrome's console log

Deleting multiple elements from a list

If you're deleting multiple non-adjacent items, then what you describe is the best way (and yes, be sure to start from the highest index).

If your items are adjacent, you can use the slice assignment syntax:

a[2:10] = []

PostgreSQL: ERROR: operator does not exist: integer = character varying

I think it is telling you exactly what is wrong. You cannot compare an integer with a varchar. PostgreSQL is strict and does not do any magic typecasting for you. I'm guessing SQLServer does typecasting automagically (which is a bad thing).

If you want to compare these two different beasts, you will have to cast one to the other using the casting syntax ::.

Something along these lines:

create view view1
as 
select table1.col1,table2.col1,table3.col3
from table1 
inner join
table2 
inner join 
table3
on 
table1.col4::varchar = table2.col5
/* Here col4 of table1 is of "integer" type and col5 of table2 is of type "varchar" */
/* ERROR: operator does not exist: integer = character varying */
....;

Notice the varchar typecasting on the table1.col4.

Also note that typecasting might possibly render your index on that column unusable and has a performance penalty, which is pretty bad. An even better solution would be to see if you can permanently change one of the two column types to match the other one. Literately change your database design.

Or you could create a index on the casted values by using a custom, immutable function which casts the values on the column. But this too may prove suboptimal (but better than live casting).

What is a "callable"?

Quite simply, a "callable" is something that can be called like a method. The built in function "callable()" will tell you whether something appears to be callable, as will checking for a call property. Functions are callable as are classes, class instances can be callable. See more about this here and here.

How to specify the default error page in web.xml?

You can also do something like that:

<error-page>
    <error-code>403</error-code>
    <location>/403.html</location>
</error-page>

<error-page>
    <location>/error.html</location>
</error-page>

For error code 403 it will return the page 403.html, and for any other error code it will return the page error.html.

sys.path different in Jupyter and Python - how to import own modules in Jupyter?

Jupyter is base on ipython, a permanent solution could be changing the ipython config options.

Create a config file

$ ipython profile create
$ ipython locate
/Users/username/.ipython

Edit the config file

$ cd /Users/username/.ipython
$ vi profile_default/ipython_config.py

The following lines allow you to add your module path to sys.path

c.InteractiveShellApp.exec_lines = [
    'import sys; sys.path.append("/path/to/your/module")'
]

At the jupyter startup the previous line will be executed

Here you can find more details about ipython config https://www.lucypark.kr/blog/2013/02/10/when-python-imports-and-ipython-does-not/

How to rebuild docker container in docker-compose.yml?

With docker-compose 1.19 up

docker-compose up --build --force-recreate --no-deps [-d] [<service_name>..]

Without one or more service_name arguments all images will be built if missing and all containers will be recreated.

From the help menu

Options:
    -d, --detach        Detached mode: Run containers in the background,
                        print new container names. Incompatible with
                        --abort-on-container-exit.
    --no-deps           Don't start linked services.
    --force-recreate    Recreate containers even if their configuration
                        and image haven't changed.
    --build             Build images before starting containers.

Without cache

To force a rebuild to ignore cached layers, we have to first build a new image

docker-compose build --no-cache [<service_name>..]

From the help menu

Options:
    --force-rm              Always remove intermediate containers.
    -m, --memory MEM        Set memory limit for the build container.
    --no-cache              Do not use cache when building the image.
    --no-rm                 Do not remove intermediate containers after a successful build.

Then recreate the container

docker-compose up --force-recreate --no-deps [-d] [<service_name>..]

java.io.IOException: Broken pipe

Error message suggests that the client has closed the connection while the server is still trying to write out a response.

Refer to this link for more details:

https://markhneedham.com/blog/2014/01/27/neo4j-org-eclipse-jetty-io-eofexception-caused-by-java-io-ioexception-broken-pipe/

Error installing mysql2: Failed to build gem native extension

On Ubuntu(18.04)

i was able to solve this issue by running the following:

sudo apt-get install build-essential libmysqlclient-dev
gem install mysql2

reference

Switch statement fallthrough in C#?

They left out this behaviour by design to avoid when it was not used by will but caused problems.

It can be used only if there is no statement in the case part, like:

switch (whatever)
{
    case 1:
    case 2:
    case 3: boo; break;
}

How to solve : SQL Error: ORA-00604: error occurred at recursive SQL level 1

I was able to solve "ORA-00604: error" by Droping with purge.

DROP TABLE tablename PURGE

What does the SQL Server Error "String Data, Right Truncation" mean and how do I fix it?

Either the parameter supplied for ZIP_CODE is larger (in length) than ZIP_CODEs column width or the parameter supplied for CITY is larger (in length) than CITYs column width.

It would be interesting to know the values supplied for the two ? placeholders.

What is the "Illegal Instruction: 4" error and why does "-mmacosx-version-min=10.x" fix it?

From the Apple Developer Forum (account required):

"The compiler and linker are capable of using features and performing optimizations that do not work on older OS versions. -mmacosx-version-min tells the tools what OS versions you need to work with, so the tools can disable optimizations that won't run on those OS versions. If you need to run on older OS versions then you must use this flag.

"The downside to -mmacosx-version-min is that the app's performance may be worse on newer OS versions then it could have been if it did not need to be backwards-compatible. In most cases the differences are small."

How to add "active" class to wp_nav_menu() current menu item (simple way)

Just paste this code into functions.php file:

add_filter('nav_menu_css_class' , 'special_nav_class' , 10 , 2);

function special_nav_class ($classes, $item) {
  if (in_array('current-menu-item', $classes) ){
    $classes[] = 'active ';
  }
  return $classes;
}

More on wordpress.org:

Declaring variables inside or outside of a loop

Inside, the less scope the variable is visible into the better.

Angular.js ng-repeat filter by property having one of multiple values (OR of values)

After not able to find a good universal solution I made something of my own. I have not tested it for a very large list.

It takes care of nested keys,arrays or just about anything.

Here is the github and demo

app.filter('xf', function() {
    function keyfind(f, obj) {
        if (obj === undefined)
            return -1;
        else {
            var sf = f.split(".");
            if (sf.length <= 1) {
                return obj[sf[0]];
            } else {
                var newobj = obj[sf[0]];
                sf.splice(0, 1);
                return keyfind(sf.join("."), newobj)
            }
        }

    }
    return function(input, clause, fields) {
        var out = [];
        if (clause && clause.query && clause.query.length > 0) {
            clause.query = String(clause.query).toLowerCase();
            angular.forEach(input, function(cp) {
                for (var i = 0; i < fields.length; i++) {
                    var haystack = String(keyfind(fields[i], cp)).toLowerCase();
                    if (haystack.indexOf(clause.query) > -1) {
                        out.push(cp);
                        break;
                    }
                }
            })
        } else {
            angular.forEach(input, function(cp) {
                out.push(cp);
            })
        }
        return out;
    }

})

HTML 

<input ng-model="search.query" type="text" placeholder="search by any property">
<div ng-repeat="product in products |  xf:search:['color','name']">
...
</div>

C# equivalent of the IsNull() function in SQL Server

Use the Equals method:

object value2 = null;
Console.WriteLine(object.Equals(value2,null));

WampServer: php-win.exe The program can't start because MSVCR110.dll is missing

What solves my problem: I am using 64 bit Windows 7, so I thought I could install 64 bit Wamp. After I Installed the 32-bit version the error does not appear. So something in the developing process at Wamp went wrong...

Pandas KeyError: value not in index

please try this to clean and format your column names:

df.columns = (df.columns.str.strip().str.upper()
              .str.replace(' ', '_')
              .str.replace('(', '')
              .str.replace(')', ''))

#ifdef replacement in the Swift language

There are some processors that take an argument and I listed them below. you can change the argument as you like:

#if os(macOS) /* Checks the target operating system */

#if canImport(UIKit) /* Check if a module presents */

#if swift(<5) /* Check the Swift version */

#if targetEnvironment(simulator) /* Check envrionments like Simulator or Catalyst */

#if compiler(<7) /* Check compiler version */

Also, You can use any custom flags like DEBUG or any other flags you defined

#if DEBUG
print("Debug mode")
#endif

Run a Command Prompt command from Desktop Shortcut

  1. Create new text file on desktop;

  2. Enter desired commands in text file;

  3. Rename extension of text file from ".txt" --> ".bat"

How to add elements to an empty array in PHP?

It's better to not use array_push and just use what you suggested. The functions just add overhead.

//We don't need to define the array, but in many cases it's the best solution.
$cart = array();

//Automatic new integer key higher than the highest 
//existing integer key in the array, starts at 0.
$cart[] = 13;
$cart[] = 'text';

//Numeric key
$cart[4] = $object;

//Text key (assoc)
$cart['key'] = 'test';

Vertically centering Bootstrap modal window

My choice, just a little CSS: ( NOT working in IE8 )

.modal.fade .modal-dialog {
    transform: translate(-50%, -80%);
}

.modal.in .modal-dialog {
    position: absolute;
    left: 50%;
    top: 50%;
    transform: translate(-50%, -50%);
    margin-top: 0px;
}

You can play with the first rule to change how the modal appears.

Using: Bootstrap 3.3.4

How to set a dropdownlist item as selected in ASP.NET?

This is a very nice and clean example:(check this great tutorial for a full explanation link)

public static IEnumerable<SelectListItem> ToSelectListItems(
              this IEnumerable<Album> albums, int selectedId)
{
    return 
        albums.OrderBy(album => album.Name)
              .Select(album => 
                  new SelectListItem
                  {
                    Selected = (album.ID == selectedId),
                    Text = album.Name,
                    Value = album.ID.ToString()
                   });
}

In this MSDN link you can read de DropDownList method documentation.

Hope it helps.

jQuery UI Sortable, then write order into a database

The jQuery UI sortable feature includes a serialize method to do this. It's quite simple, really. Here's a quick example that sends the data to the specified URL as soon as an element has changes position.

$('#element').sortable({
    axis: 'y',
    update: function (event, ui) {
        var data = $(this).sortable('serialize');

        // POST to server using $.post or $.ajax
        $.ajax({
            data: data,
            type: 'POST',
            url: '/your/url/here'
        });
    }
});

What this does is that it creates an array of the elements using the elements id. So, I usually do something like this:

<ul id="sortable">
   <li id="item-1"></li>
   <li id="item-2"></li>
   ...
</ul>

When you use the serialize option, it will create a POST query string like this: item[]=1&item[]=2 etc. So if you make use - for example - your database IDs in the id attribute, you can then simply iterate through the POSTed array and update the elements' positions accordingly.

For example, in PHP:

$i = 0;

foreach ($_POST['item'] as $value) {
    // Execute statement:
    // UPDATE [Table] SET [Position] = $i WHERE [EntityId] = $value
    $i++;
}

Example on jsFiddle.

CSS disable text selection

Just wanted to summarize everything:

.unselectable {
  -webkit-touch-callout: none;
  -webkit-user-select: none;
  -khtml-user-select: none;
  -moz-user-select: none;
  -ms-user-select: none;
  user-select: none;
}

<div class="unselectable" unselectable="yes" onselectstart="return false;"/>

Python open() gives FileNotFoundError/IOError: Errno 2 No such file or directory

Most likely, the problem is that you're using a relative file path to open the file, but the current working directory isn't set to what you think it is.

It's a common misconception that relative paths are relative to the location of the python script, but this is untrue. Relative file paths are always relative to the current working directory, and the current working directory doesn't have to be the location of your python script.

You have three options:

  • Use an absolute path to open the file:

    file = open(r'C:\path\to\your\file.yaml')

  • Generate the path to the file relative to your python script:

    from pathlib import Path

script_location = Path(__file__).absolute().parent
file_location = script_location / 'file.yaml'
file = file_location.open()

    (See also: How do I get the path and name of the file that is currently executing?)

  • Change the current working directory before opening the file:

    import os

os.chdir(r'C:\path\to\your\file')
file = open('file.yaml')

Other common mistakes that could cause a "file not found" error include:

  • Accidentally using escape sequences in a file path:

    path = 'C:\Users\newton\file.yaml'
# Incorrect! The '\n' in 'Users\newton' is a line break character!

    To avoid making this mistake, remember to use raw string literals for file paths:

    path = r'C:\Users\newton\file.yaml'
# Correct!

    (See also: Windows path in Python)

  • Forgetting that Windows doesn't display file extensions:

    Since Windows doesn't display known file extensions, sometimes when you think your file is named file.yaml, it's actually named file.yaml.yaml. Double-check your file's extension.

Android: How to turn screen on and off programmatically?

The best way to do it ( using rooted devices) :

@Override
protected void onCreate(Bundle savedInstanceState) {
    super.onCreate(savedInstanceState);
    .
    .
    .

    int flags = WindowManager.LayoutParams.FLAG_DISMISS_KEYGUARD | WindowManager.LayoutParams.FLAG_SHOW_WHEN_LOCKED | WindowManager.LayoutParams.FLAG_TURN_SCREEN_ON;
    getWindow().addFlags(flags); // this is how your app will wake up the screen
    //you will call this activity later

   .
   .
   .
}

Now we have this two functions: 

private void turnOffScreen(){

  try{
     Class c = Class.forName("android.os.PowerManager");
     PowerManager  mPowerManager = (PowerManager) this.getSystemService(Context.POWER_SERVICE);
     for(Method m : c.getDeclaredMethods()){
        if(m.getName().equals("goToSleep")){
          m.setAccessible(true);
          if(m.getParameterTypes().length == 1){
            m.invoke(mPowerManager,SystemClock.uptimeMillis()-2);
          }
        }
     } 
  } catch (Exception e){
  }
}

And this: 

public void turnOnScreen(){
  Intent i = new Intent(this,YOURACTIVITYWITHFLAGS.class);
  startActivity(i);
}

Sorry for my bad english.

How to create full path with node's fs.mkdirSync?

fs-extra adds file system methods that aren't included in the native fs module. It is a drop in replacement for fs.

Install fs-extra

$ npm install --save fs-extra

const fs = require("fs-extra");
// Make sure the output directory is there.
fs.ensureDirSync(newDest);

There are sync and async options.

https://github.com/jprichardson/node-fs-extra/blob/master/docs/ensureDir.md

Convert Go map to json

If you had caught the error, you would have seen this:

jsonString, err := json.Marshal(datas)
fmt.Println(err)

// [] json: unsupported type: map[int]main.Foo

The thing is you cannot use integers as keys in JSON; it is forbidden. Instead, you can convert these values to strings beforehand, for instance using strconv.Itoa.

See this post for more details: https://stackoverflow.com/a/24284721/2679935

Facebook Architecture

Facebook is using LAMP structure. Facebook’s back-end services are written in a variety of different programming languages including C++, Java, Python, and Erlang and they are used according to requirement. With LAMP Facebook uses some technologies ,to support large number of requests, like

  1. Memcache - It is a memory caching system that is used to speed up dynamic database-driven websites (like Facebook) by caching data and objects in RAM to reduce reading time. Memcache is Facebook’s primary form of caching and helps alleviate the database load. Having a caching system allows Facebook to be as fast as it is at recalling your data.

  2. Thrift (protocol) - It is a lightweight remote procedure call framework for scalable cross-language services development. Thrift supports C++, PHP, Python, Perl, Java, Ruby, Erlang, and others.

  3. Cassandra (database) - It is a database management system designed to handle large amounts of data spread out across many servers.

  4. HipHop for PHP - It is a source code transformer for PHP script code and was created to save server resources. HipHop transforms PHP source code into optimized C++. After doing this, it uses g++ to compile it to machine code.

If we go into more detail, then answer to this question go longer. We can understand more from following posts:

  1. How Does Facebook Work?
  2. Data Management, Facebook-style
  3. Facebook database design?
  4. Facebook wall's database structure
  5. Facebook "like" data structure

Adb install failure: INSTALL_CANCELED_BY_USER

Its a Xiaomi's issue If possible update MIUI to latest version then go to Settings > Additional Settings > Developer Options > Developer options: Check the Install via USB option.

This solved my issue hope it will also solve yours good luck!

New Intent() starts new instance with Android: launchMode="singleTop"

You can return to the same existing instance of Activity with android:launchMode="singleInstance"

in the manifest. When you return to A from B, may be needed finish() to destroy B.

What is the minimum I have to do to create an RPM file?

Easy way to build rpm package from binary (these steps were tested with Fedora 18):

1) First you have to install rpmdevtools, so run these commands (attention: run as normal user)

$ sudo yum install rpmdevtools rpmlint
$ rpmdev-setuptree

2) In the ~/rpmbuild/SPECS folder create new file: package_name.spec

3) Open it with an editor (like gedit) and write this:

Name:           package_name
Version:        1.0
Release:        1
Summary:        Short description (first char has to be uppercase)

License:        GPL
URL:            www. your_website/

BuildRequires:  package_required >= (or ==, or <=) 1.0.3 (for example)

%description
Description with almost 79 characters (first char has to be uppercase)

#This is a comment (just as example)

%files
/usr/bin/binary_file.bin
/usr/share/applications/package_name.desktop
/usr/share/pixmaps/package_name.png

%changelog
* date Packager's Name <packager's_email> version-revision
- Summary of changes

#For more details see: docs.fedoraproject.org/en-US/Fedora_Draft_Documentation/0.1/html/Packagers_Guide/sect-Packagers_Guide-Creating_a_Basic_Spec_File.html

4) Make ~/rpmbuild/BUILDROOT/package_name-version-release.i386 and reproduce the paths where the files will be placed So in this case for example create:

  • ~/rpmbuild/BUILDROOT/package_name-version-release.i386/usr/bin/
  • ~/rpmbuild/BUILDROOT/package_name-version-release.i386/usr/share/applications/
  • ~/rpmbuild/BUILDROOT/package_name-version-release.i386/usr/share/pixmaps/

5) Put in these folders the files that you want insert in the package:

  • ~/rpmbuild/BUILDROOT/package_name-version-release.i386/usr/bin/binary_file.bin
  • ~/rpmbuild/BUILDROOT/package_name-version-release.i386/usr/share/applications/package_name.desktop
  • ~/rpmbuild/BUILDROOT/package_name-version-release.i386/usr/share/pixmaps/package_name.png

usr/share/pixmaps/package_name.png is the icon of binary usr/share/applications/package_name.desktop are the rules to insert the program in the menu entries

6) package_name.desktop must be like this:

[Desktop Entry]
Encoding=UTF-8
Type=Application
Name=example
GenericName=Short description
Comment=Comment of the application
Exec=package_name
Icon=package_name
Terminal=false
Categories=System;

Categories are these: standards.freedesktop.org/menu-spec/latest/apa.html

7) Run $ rpmbuild -bb ~/rpmbuild/SPECS/package_name.spec

8) Your package was built into ~/rpmbuild/RPMS folder

if you install this package it's install:

  • /usr/bin/binary_file.bin
  • /usr/share/applications/package_name.desktop
  • /usr/share/pixmaps/package_name.png

Thanks to: losurs.org/docs/tips/redhat/binary-rpms

For more details to build rpm take a look at this link.

GUI java software to build rpm: https://sourceforge.net/projects/javarpmbuilder/

Upgrading Node.js to latest version

via npm:

# npm cache clean -f
# npm install -g n
# n stable

and also you can specify a desired version:

# n 0.8.21

reference

how to log in to mysql and query the database from linux terminal

1.- How do I get mysql prompt in linux terminal?

mysql -u root -p

At the Enter password: prompt, well, enter root's password :)

You can find further reference by typing mysql --help or at the online manual.

2. How I stop the mysql server from linux terminal?

It depends. Red Hat based distros have the service command:

service mysqld stop

Other distros require to call the init script directly:

/etc/init.d/mysqld stop

3. How I start the mysql server from linux terminal?

Same as #2, but with start.

4. How do I get mysql prompt in linux terminal?

Same as #1.

5. How do I login to mysql server from linux terminal?

Same as #1.

6. How do I solve following error?

Same as #1.

How to remove default mouse-over effect on WPF buttons?

The Muffin Man had a very simple answer which worked for me.

To add a little more specific direction, at least for VS 2013:

  • Right-click the control
  • Select Edit Template => Edit a copy...
  • I selected 'Application' for where to save the style
    • From here you can directly edit App.xaml and see the intuitively named properties. For my purposes, I just set RenderMouseOver="False"
  • Then, in the MainWindow.xaml or wherever your GUI is, you can paste the new style at the end of the Button tag, e.g. ... Style="{DynamicResource MouseOverNonDefault}"/>

Git submodule update

This GitPro page does summarize the consequence of a git submodule update nicely

When you run git submodule update, it checks out the specific version of the project, but not within a branch. This is called having a detached head — it means the HEAD file points directly to a commit, not to a symbolic reference.
The issue is that you generally don’t want to work in a detached head environment, because it’s easy to lose changes.
If you do an initial submodule update, commit in that submodule directory without creating a branch to work in, and then run git submodule update again from the superproject without committing in the meantime, Git will overwrite your changes without telling you. Technically you won’t lose the work, but you won’t have a branch pointing to it, so it will be somewhat difficult to retrieve.

Note March 2013:

As mentioned in "git submodule tracking latest", a submodule now (git1.8.2) can track a branch. 

# add submodule to track master branch
git submodule add -b master [URL to Git repo];

# update your submodule
git submodule update --remote 
# or (with rebase)
git submodule update --rebase --remote

See "git submodule update --remote vs git pull".

MindTooth's answer illustrate a manual update (without local configuration): 

git submodule -q foreach git pull -q origin master

In both cases, that will change the submodules references (the gitlink, a special entry in the parent repo index), and you will need to add, commit and push said references from the main repo.
Next time you will clone that parent repo, it will populate the submodules to reflect those new SHA1 references.

The rest of this answer details the classic submodule feature (reference to a fixed commit, which is the all point behind the notion of a submodule).

To avoid this issue, create a branch when you work in a submodule directory with git checkout -b work or something equivalent. When you do the submodule update a second time, it will still revert your work, but at least you have a pointer to get back to.

Switching branches with submodules in them can also be tricky. If you create a new branch, add a submodule there, and then switch back to a branch without that submodule, you still have the submodule directory as an untracked directory:

So, to answer your questions:

can I create branches/modifications and use push/pull just like I would in regular repos, or are there things to be cautious about?

You can create a branch and push modifications.

WARNING (from Git Submodule Tutorial): Always publish (push) the submodule change before publishing (push) the change to the superproject that references it. If you forget to publish the submodule change, others won't be able to clone the repository.

how would I advance the submodule referenced commit from say (tagged) 1.0 to 1.1 (even though the head of the original repo is already at 2.0)

The page "Understanding Submodules" can help

Git submodules are implemented using two moving parts:

  • the .gitmodules file and
  • a special kind of tree object.

These together triangulate a specific revision of a specific repository which is checked out into a specific location in your project.

From the git submodule page

you cannot modify the contents of the submodule from within the main project

100% correct: you cannot modify a submodule, only refer to one of its commits.

This is why, when you do modify a submodule from within the main project, you:

  • need to commit and push within the submodule (to the upstream module), and
  • then go up in your main project, and re-commit (in order for that main project to refer to the new submodule commit you just created and pushed)

A submodule enables you to have a component-based approach development, where the main project only refers to specific commits of other components (here "other Git repositories declared as sub-modules").

A submodule is a marker (commit) to another Git repository which is not bound by the main project development cycle: it (the "other" Git repo) can evolves independently.
It is up to the main project to pick from that other repo whatever commit it needs.

However, should you want to, out of convenience, modify one of those submodules directly from your main project, Git allows you to do that, provided you first publish those submodule modifications to its original Git repo, and then commit your main project refering to a new version of said submodule.

But the main idea remains: referencing specific components which:

  • have their own lifecycle
  • have their own set of tags
  • have their own development

The list of specific commits you are refering to in your main project defines your configuration (this is what Configuration Management is all about, englobing mere Version Control System)

If a component could really be developed at the same time as your main project (because any modification on the main project would involve modifying the sub-directory, and vice-versa), then it would be a "submodule" no more, but a subtree merge (also presented in the question Transferring legacy code base from cvs to distributed repository), linking the history of the two Git repo together.

Does that help understanding the true nature of Git Submodules?

'profile name is not valid' error when executing the sp_send_dbmail command

In my case, I was moving a SProc between servers and the profile name in my TSQL code did not match the profile name on the new server.

Updating TSQL profile name == New server profile name fixed the error for me.

Center Div inside another (100% width) div

 
.outerdiv {
    margin-left: auto;
    margin-right: auto;
    display: table;
}

Doesn't work in internet explorer 7... but who cares ?

Foreign keys in mongo?

We can define the so-called foreign key in MongoDB. However, we need to maintain the data integrity BY OURSELVES. For example,

student
{ 
  _id: ObjectId(...),
  name: 'Jane',
  courses: ['bio101', 'bio102']   // <= ids of the courses
}

course
{
  _id: 'bio101',
  name: 'Biology 101',
  description: 'Introduction to biology'
}

The courses field contains _ids of courses. It is easy to define a one-to-many relationship. However, if we want to retrieve the course names of student Jane, we need to perform another operation to retrieve the course document via _id.

If the course bio101 is removed, we need to perform another operation to update the courses field in the student document.

More: MongoDB Schema Design

The document-typed nature of MongoDB supports flexible ways to define relationships. To define a one-to-many relationship:

Embedded document

  1. Suitable for one-to-few.
  2. Advantage: no need to perform additional queries to another document.
  3. Disadvantage: cannot manage the entity of embedded documents individually.

Example:

student
{
  name: 'Kate Monster',
  addresses : [
     { street: '123 Sesame St', city: 'Anytown', cc: 'USA' },
     { street: '123 Avenue Q', city: 'New York', cc: 'USA' }
  ]
}

Child referencing

Like the student/course example above.

Parent referencing

Suitable for one-to-squillions, such as log messages.

host
{
    _id : ObjectID('AAAB'),
    name : 'goofy.example.com',
    ipaddr : '127.66.66.66'
}

logmsg
{
    time : ISODate("2014-03-28T09:42:41.382Z"),
    message : 'cpu is on fire!',
    host: ObjectID('AAAB')       // Reference to the Host document
}

Virtually, a host is the parent of a logmsg. Referencing to the host id saves much space given that the log messages are squillions.

References:

  1. 6 Rules of Thumb for MongoDB Schema Design: Part 1
  2. 6 Rules of Thumb for MongoDB Schema Design: Part 2
  3. 6 Rules of Thumb for MongoDB Schema Design: Part 3
  4. Model One-to-Many Relationships with Document References

Creating an Arraylist of Objects

If you want to allow a user to add a bunch of new MyObjects to the list, you can do it with a for loop: Let's say I'm creating an ArrayList of Rectangle objects, and each Rectangle has two parameters- length and width.

//here I will create my ArrayList:

ArrayList <Rectangle> rectangles= new ArrayList <>(3); 

int length;
int width;

for(int index =0; index <3;index++)
{JOptionPane.showMessageDialog(null, "Rectangle " + (index + 1));
 length = JOptionPane.showInputDialog("Enter length");
 width = JOptionPane.showInputDialog("Enter width");

 //Now I will create my Rectangle and add it to my rectangles ArrayList:

 rectangles.add(new Rectangle(length,width));

//This passes the length and width values to the rectangle constructor,
  which will create a new Rectangle and add it to the ArrayList.

}

How to remove the last element added into the List?

The direct answer to this question is:

if(rows.Any()) //prevent IndexOutOfRangeException for empty list
{
    rows.RemoveAt(rows.Count - 1);
}

However... in the specific case of this question, it makes more sense not to add the row in the first place:

Row row = new Row();
//...      

if (!row.cell[0].Equals("Something"))
{
    rows.Add(row);
}

TBH, I'd go a step further by testing "Something" against user."", and not even instantiating a Row unless the condition is satisfied, but seeing as user."" won't compile, I'll leave that as an exercise for the reader.

Undefined reference to pthread_create in Linux

In Visual Studio 2019 specify -pthread in the property pages for the project under:

Linker -> Command Line -> Additional Options

Type in -pthread in the textbox.

R: numeric 'envir' arg not of length one in predict()

There are several problems here:

  1. The newdata argument of predict() needs a predictor variable. You should thus pass it values for Coupon, instead of Total, which is the response variable in your model.

  2. The predictor variable needs to be passed in as a named column in a data frame, so that predict() knows what the numbers its been handed represent. (The need for this becomes clear when you consider more complicated models, having more than one predictor variable).

  3. For this to work, your original call should pass df in through the data argument, rather than using it directly in your formula. (This way, the name of the column in newdata will be able to match the name on the RHS of the formula).

With those changes incorporated, this will work:

model <- lm(Total ~ Coupon, data=df)
new <- data.frame(Coupon = df$Coupon)
predict(model, newdata = new, interval="confidence")

Loop through all elements in XML using NodeList

Here is another way to loop through XML elements using JDOM.

        List<Element> nodeNodes = inputNode.getChildren();
        if (nodeNodes != null) {
            for (Element nodeNode : nodeNodes) {
                List<Element> elements = nodeNode.getChildren(elementName);
                if (elements != null) {
                    elements.size();
                    nodeNodes.removeAll(elements);
                }
            }

How to update Pandas from Anaconda and is it possible to use eclipse with this last

Simply type conda update pandas in your preferred shell (on Windows, use cmd; if Anaconda is not added to your PATH use the Anaconda prompt). You can of course use Eclipse together with Anaconda, but you need to specify the Python-Path (the one in the Anaconda-Directory). See this document for a detailed instruction.

How to set ssh timeout?

Use the -o ConnectTimeout and -o BatchMode=yes -o StrictHostKeyChecking=no .

ConnectTimeout keeps the script from hanging, BatchMode keeps it from hanging with Host unknown, YES to add to known_hosts, and StrictHostKeyChecking adds the fingerprint automatically.

**** NOTE **** The "StrictHostKeyChecking" was only intended for internal networks where you trust you hosts. Depending on the version of the SSH client, the "Are you sure you want to add your fingerprint" can cause the client to hang indefinitely (mainly old versions running on AIX). Most modern versions do not suffer from this issue. If you have to deal with fingerprints with multiple hosts, I recommend maintaining the known_hosts file with some sort of configuration management tool like puppet/ansible/chef/salt/etc.

VB.NET Switch Statement GoTo Case

 
Select Case parameter 
    ' does something here. 
    ' does something here. 
    Case "userID", "packageID", "mvrType" 
        If otherFactor Then 
            ' does something here. 
        Else 
            goto case default 
        End If 
    Case Else 
        ' does some processing... 
        Exit Select 
End Select

How to get current time and date in C++?

Yes and you can do so with formatting rules specified by the currently-imbued locale:

#include <iostream>
#include <iterator>
#include <string>

class timefmt
{
public:
    timefmt(std::string fmt)
        : format(fmt) { }

    friend std::ostream& operator <<(std::ostream &, timefmt const &);

private:
    std::string format;
};

std::ostream& operator <<(std::ostream& os, timefmt const& mt)
{
    std::ostream::sentry s(os);

    if (s)
    {
        std::time_t t = std::time(0);
        std::tm const* tm = std::localtime(&t);
        std::ostreambuf_iterator<char> out(os);

        std::use_facet<std::time_put<char>>(os.getloc())
            .put(out, os, os.fill(),
                 tm, &mt.format[0], &mt.format[0] + mt.format.size());
    }

    os.width(0);

    return os;
}

int main()
{
    std::cout << timefmt("%c");
}

Output: Fri Sep 6 20:33:31 2013

Call method when home button pressed

I found that when I press the button HOME the onStop() method is called.You can use the following piece of code to monitor it:

@Override
    protected void onStop() 
    {
        super.onStop();
        Log.d(tag, "MYonStop is called");
        // insert here your instructions
    }

What is the best way to compare 2 folder trees on windows?

SyncToy is a free application from Microsoft with a "Preview" mode for comparing two paths. For example:

SyncToy Preview screenshot (source: https://maketecheasier-2d0f.kxcdn.com/assets/uploads/2010/06/synctoy-preview.png)

You can then choose one of three modes ("Synchronize", "Echo" and "Contribute") to resolve the differences.

Lastly, it comes with SyncToyCmd for creating and synchronizing folder pairs from the CLI or a Scheduled Task.

What's the source of Error: getaddrinfo EAI_AGAIN?

I had a same problem with AWS and Serverless. I tried with eu-central-1 region and it didn't work so I had to change it to us-east-2 for the example.

Docker-compose: node_modules not present in a volume after npm install succeeds

UPDATE: Use the solution provided by @FrederikNS.

I encountered the same problem. When the folder /worker is mounted to the container - all of it's content will be syncronized (so the node_modules folder will disappear if you don't have it locally.)

Due to incompatible npm packages based on OS, I could not just install the modules locally - then launch the container, so..

My solution to this, was to wrap the source in a src folder, then link node_modules into that folder, using this index.js file. So, the index.js file is now the starting point of my application.

When I run the container, I mounted the /app/src folder to my local src folder.

So the container folder looks something like this:

/app
  /node_modules
  /src
    /node_modules -> ../node_modules
    /app.js
  /index.js

It is ugly, but it works..

How to print something to the console in Xcode?

You can also use breakpoints. Assuming the value you want is defined within the scope of your breakpoint you have 3 options:

print it in console doing:

po some_paramter

Bare in mind in objective-c for properties you can't use self.

po _someProperty
po self.someProperty // would not work

po stands for print object.

Or can just use Xcode 'Variable Views' . See the image enter image description here

I highly recommend seeing Debugging with Xcode from Apple

Or just hover over within your code. Like the image below.

enter image description here

How to switch back to 'master' with git?

According to the Git Cheatsheet you have to create the branch first 

git branch [branchName]

and then 

git checkout [branchName]

GROUP_CONCAT comma separator - MySQL

Looks like you're missing the SEPARATOR keyword in the GROUP_CONCAT function.

GROUP_CONCAT(artists.artistname SEPARATOR '----')

The way you've written it, you're concatenating artists.artistname with the '----' string using the default comma separator.

jQuery Change event on an <input> element - any way to retain previous value?

I created these functions based on Joey Guerra's suggestion, thank you for that. I'm elaborating a little bit, perhaps someone can use it. The first function checkDefaults() is called when an input changes, the second is called when the form is submitted using jQuery.post. div.updatesubmit is my submit button, and class 'needsupdate' is an indicator that an update is made but not yet submitted.

function checkDefaults() {
    var changed = false;
        jQuery('input').each(function(){
            if(this.defaultValue != this.value) {
                changed = true;
            }
        });
        if(changed === true) {
            jQuery('div.updatesubmit').addClass("needsupdate");
        } else {
            jQuery('div.updatesubmit').removeClass("needsupdate");
        }
}

function renewDefaults() {
        jQuery('input').each(function(){
            this.defaultValue = this.value;
        });
        jQuery('div.updatesubmit').removeClass("needsupdate");
}

How can I capitalize the first letter of each word in a string?

The .title() method can't work well,

>>> "they're bill's friends from the UK".title()
"They'Re Bill'S Friends From The Uk"

Try string.capwords() method,

import string
string.capwords("they're bill's friends from the UK")
>>>"They're Bill's Friends From The Uk"

From the Python documentation on capwords:

Split the argument into words using str.split(), capitalize each word using str.capitalize(), and join the capitalized words using str.join(). If the optional second argument sep is absent or None, runs of whitespace characters are replaced by a single space and leading and trailing whitespace are removed, otherwise sep is used to split and join the words.

How to include scripts located inside the node_modules folder?

This is what I have setup on my express server:

// app.js
const path = require('path');
const express = require('express');
const expressApp  = express();
const nm_dependencies = ['bootstrap', 'jquery', 'popper.js']; // keep adding required node_modules to this array.
nm_dependencies.forEach(dep => {
  expressApp.use(`/${dep}`, express.static(path.resolve(`node_modules/${dep}`)));
});

<!-- somewhere inside head tag -->
<link rel="stylesheet" href="bootstrap/dist/css/bootstrap.css" />

<!-- somewhere near ending body tag -->
<script src="jquery/dist/jquery.js" charset="utf-8"></script>
<script src="popper.js/dist/popper.js" charset="utf-8"></script>
<script src="bootstrap/dist/js/bootstrap.js" charset="utf-8"></script>

Good Luck...

Subtract a value from every number in a list in Python?

This will work:

for i in range(len(a)):
  a[i] -= 13

How can I URL encode a string in Excel VBA?

The accepted answer's code stopped on a Unicode error in Access 2013, so I wrote a function for myself with high readability that should follow RFC 3986 according to Davis Peixoto, and cause minimal trouble in various environments.

Note: The percent sign itself must be replaced first, or it will double-encode any previously encoded characters. Replacing space with + was added, not to conform with RFC 3986, but to provide links that don't break due to formatting. It is optional.

Public Function URLEncode(str As Variant) As String
    Dim i As Integer, sChar() As String, sPerc() As String
    sChar = Split("%|!|*|'|(|)|;|:|@|&|=|+|$|,|/|?|#|[|]| ", "|")
    sPerc = Split("%25 %21 %2A %27 %28 %29 %3B %3A %40 %26 %3D %2B %24 %2C %2F %3F %23 %5B %5D +", " ")
    URLEncode = Nz(str)
    For i = 0 To 19
        URLEncode = Replace(URLEncode, sChar(i), sPerc(i))
    Next i
End Function

Absolute position of an element on the screen using jQuery

See .offset() here in the jQuery doc. It gives the position relative to the document, not to the parent. You perhaps have .offset() and .position() confused. If you want the position in the window instead of the position in the document, you can subtract off the .scrollTop() and .scrollLeft() values to account for the scrolled position.

Here's an excerpt from the doc:

The .offset() method allows us to retrieve the current position of an element relative to the document. Contrast this with .position(), which retrieves the current position relative to the offset parent. When positioning a new element on top of an existing one for global manipulation (in particular, for implementing drag-and-drop), .offset() is the more useful.

To combine these:

var offset = $("selector").offset();
var posY = offset.top - $(window).scrollTop();
var posX = offset.left - $(window).scrollLeft();

You can try it here (scroll to see the numbers change): http://jsfiddle.net/jfriend00/hxRPQ/

Abstract Class:-Real Time Example

You should be able to cite at least one from the JDK itself. Look in the java.util.collections package. There are several abstract classes. You should fully understand interface, abstract, and concrete for Map and why Joshua Bloch wrote it that way.

How to convert Integer to int?

Java converts Integer to int and back automatically (unless you are still with Java 1.4).

What's a .sh file?

open the location in terminal then type these commands 1. chmod +x filename.sh 2. ./filename.sh that's it

How can I convert this one line of ActionScript to C#?

There is collection of Func<...> classes - Func that is probably what you are looking for:

 void MyMethod(Func<int> param1 = null)

This defines method that have parameter param1 with default value null (similar to AS), and a function that returns int. Unlike AS in C# you need to specify type of the function's arguments.

So if you AS usage was 

MyMethod(function(intArg, stringArg) { return true; })

Than in C# it would require param1 to be of type Func<int, siring, bool> and usage like

MyMethod( (intArg, stringArg) => { return true;} );

SQL INSERT INTO from multiple tables

You only need one INSERT:

INSERT INTO table4 ( name, age, sex, city, id, number, nationality)
SELECT name, age, sex, city, p.id, number, n.nationality
FROM table1 p
INNER JOIN table2 c ON c.Id = p.Id
INNER JOIN table3 n ON p.Id = n.Id

How to import NumPy in the Python shell

The message is fairly self-explanatory; your working directory should not be the NumPy source directory when you invoke Python; NumPy should be installed and your working directory should be anything but the directory where it lives.

PostgreSQL Crosstab Query

You can use the crosstab() function of the additional module tablefunc - which you have to install once per database. Since PostgreSQL 9.1 you can use CREATE EXTENSION for that:

CREATE EXTENSION tablefunc;

In your case, I believe it would look something like this:

CREATE TABLE t (Section CHAR(1), Status VARCHAR(10), Count integer);

INSERT INTO t VALUES ('A', 'Active',   1);
INSERT INTO t VALUES ('A', 'Inactive', 2);
INSERT INTO t VALUES ('B', 'Active',   4);
INSERT INTO t VALUES ('B', 'Inactive', 5);

SELECT row_name AS Section,
       category_1::integer AS Active,
       category_2::integer AS Inactive
FROM crosstab('select section::text, status, count::text from t',2)
            AS ct (row_name text, category_1 text, category_2 text);

Amazon AWS Filezilla transfer permission denied

If you're using Ubuntu then use the following:

sudo chown -R ubuntu /var/www/html

sudo chmod -R 755 /var/www/html