This is because interfaces do not allow to define the method body in it.but we should have to define the constructor in the same class as interfaces have by default abstract modifier for all the methods to define. That's why we can not define constructor in the interfaces.

This solution depends fully on the design, but if you have a parent div that you want to change the background on when hovering a child you can try to mimic the parent with a ::after / ::before.

<div class="item">
    design <span class="icon-cross">x</span>
</div>

CSS:

.item {
    background: blue;
    border-radius: 10px;
    position: relative;
    z-index: 1;
}
.item span.icon-cross:hover::after {
    background: DodgerBlue;
    border-radius: 10px;
    display: block;
    position: absolute;
    z-index: -1;
    top: 0;
    left: 0;
    right: 0;
    bottom: 0;
    content: "";
}

See a full fiddle example here

You may be confusing Javascript arrays with PHP arrays. In PHP, arrays are very flexible. They can either be numerically indexed or associative, or even mixed.

array('Item 1', 'Item 2', 'Items 3')  // numerically indexed array
array('first' => 'Item 1', 'second' => 'Item 2')  // associative array
array('first' => 'Item 1', 'Item 2', 'third' => 'Item 3')

Other languages consider these two to be different things, Javascript being among them. An array in Javascript is always numerically indexed:

['Item 1', 'Item 2', 'Item 3']  // array (numerically indexed)

An "associative array", also called Hash or Map, technically an Object in Javascript*, works like this:

{ first : 'Item 1', second : 'Item 2' }  // object (a.k.a. "associative array")

They're not interchangeable. If you need "array keys", you need to use an object. If you don't, you make an array.

* Technically everything is an Object in Javascript, please put that aside for this argument. ;)

I am using sp_whoisactive, very informative an basically industry standard. it returns percent complete as well.

I was on OSX 10.8, and everything I tried would give me the FATAL: role "USER" does not exist. Like many people said here, run createuser -s USER, but that gave me the same error. This finally worked for me:

$ sudo su
# su postgres
# createuser -s --username=postgres MYUSERNAME

The createuser -s --username=postgres creates a superuser (-s flag) by connecting as postgres (--username=postgres flag).

I see that your question has been answered, but I want to add this answer in for people using OSX trying to install PostgreSQL 9.2.4.

That's not exactly what I had in mind. What do you do if you have a generic type to only be known at runtime?

public MyDTO toObject() {
  try {
    var methodInfo = MethodBase.GetCurrentMethod();
    if (methodInfo.DeclaringType != null) {
      var fullName = methodInfo.DeclaringType.FullName + "." + this.dtoName;
      Type type = Type.GetType(fullName);
      if (type != null) {
        var obj = JsonConvert.DeserializeObject(payload);
      //var obj = JsonConvert.DeserializeObject<type.MemberType.GetType()>(payload);  // <--- type ?????
          ...
      }
    }

    // Example for java..   Convert this to C#
    return JSONUtil.fromJSON(payload, Class.forName(dtoName, false, getClass().getClassLoader()));
  } catch (Exception ex) {
    throw new ReflectInsightException(MethodBase.GetCurrentMethod().Name, ex);
  }
}

There is no need for an UDF here. Column already provides cast method with DataType instance :

from pyspark.sql.types import DoubleType

changedTypedf = joindf.withColumn("label", joindf["show"].cast(DoubleType()))

or short string:

changedTypedf = joindf.withColumn("label", joindf["show"].cast("double"))

where canonical string names (other variations can be supported as well) correspond to simpleString value. So for atomic types:

from pyspark.sql import types 

for t in ['BinaryType', 'BooleanType', 'ByteType', 'DateType', 
          'DecimalType', 'DoubleType', 'FloatType', 'IntegerType', 
           'LongType', 'ShortType', 'StringType', 'TimestampType']:
    print(f"{t}: {getattr(types, t)().simpleString()}")

BinaryType: binary
BooleanType: boolean
ByteType: tinyint
DateType: date
DecimalType: decimal(10,0)
DoubleType: double
FloatType: float
IntegerType: int
LongType: bigint
ShortType: smallint
StringType: string
TimestampType: timestamp

and for example complex types

types.ArrayType(types.IntegerType()).simpleString()   

'array<int>'

types.MapType(types.StringType(), types.IntegerType()).simpleString()

'map<string,int>'

Date is Comparable so just create list of List<Date> and sort it using Collections.sort(). And use Collections.reverseOrder() to get comparator in reverse ordering.

From Java Doc

Returns a comparator that imposes the reverse ordering of the specified comparator. If the specified comparator is null, this method is equivalent to reverseOrder() (in other words, it returns a comparator that imposes the reverse of the natural ordering on a collection of objects that implement the Comparable interface).

Alternately, you could do a Text to Columns with space as the delimiter.

All answers are good, there is another way of doing, which is list comprehension, see the solution below.

u = "UUUDDD"

lst = [x for x in u]

for comma separated list do the following

u = "U,U,U,D,D,D"

lst = [x for x in u.split(',')]

A little bit more cleaned and universal : Add this method :

- (void)deleteAllEntities:(NSString *)nameEntity
{
    NSFetchRequest *fetchRequest = [[NSFetchRequest alloc] initWithEntityName:nameEntity];
    [fetchRequest setIncludesPropertyValues:NO]; //only fetch the managedObjectID

    NSError *error;
    NSArray *fetchedObjects = [theContext executeFetchRequest:fetchRequest error:&error];
    for (NSManagedObject *object in fetchedObjects)
    {
        [theContext deleteObject:object];
    }

    error = nil;
    [theContext save:&error];
}

If you want to clear all the headers as well as the data, for example if you are switching between 2 totally different databases with different fields, therefore different columns and column headers, I found the following to work. Otherwise when you switch you have the columns/ fields from both databases showing in the grid.

dataTable.Dispose();//get rid of existing datatable
dataTable = new DataTable();//create new datatable

datagrid.DataSource = dataTable;//clears out the datagrid with empty datatable
//datagrid.Refresh(); This does not seem to be neccesary

dataadapter.Fill(dataTable); //assumming you set the adapter with new data               
datagrid.DataSource = dataTable; 

forEach() can be implemented to be faster than for-each loop, because the iterable knows the best way to iterate its elements, as opposed to the standard iterator way. So the difference is loop internally or loop externally.

For example ArrayList.forEach(action) may be simply implemented as

for(int i=0; i<size; i++)
    action.accept(elements[i])

as opposed to the for-each loop which requires a lot of scaffolding

Iterator iter = list.iterator();
while(iter.hasNext())
    Object next = iter.next();
    do something with `next`

However, we also need to account for two overhead costs by using forEach(), one is making the lambda object, the other is invoking the lambda method. They are probably not significant.

see also http://journal.stuffwithstuff.com/2013/01/13/iteration-inside-and-out/ for comparing internal/external iterations for different use cases.

This error is quite right and highlights a contextual syntax issue. Can be reproduced by performing any kind "non-assignable" syntax. For instance:

function Syntax($hello) { .... then attempt to call the function as though a property and assign a value.... $this->Syntax('Hello') = 'World';

The above error will be thrown because syntactially the statement is wrong. The right assignment of 'World' cannot be written in the context you have used (i.e. syntactically incorrect for this context). 'Cannot use function return value' or it could read 'Cannot assign the right-hand value to the function because its read-only'

The specific error in the OPs code is as highlighted, using brackets instead of square brackets.

If you are using the Android Support Library you can use ConfigurationCompat instead of @Makalele's method to get rid of deprecation warnings:

Locale current = ConfigurationCompat.getLocales(getResources().getConfiguration()).get(0);

or in Kotlin:

val currentLocale = ConfigurationCompat.getLocales(resources.configuration)[0]

EDIT 2020-09-21: Since 3.4.0, Mockito supports mocking static methods, API is still incubating and is likely to change, in particular around stubbing and verification. It requires the mockito-inline artifact. And you don't need to prepare the test or use any specific runner. All you need to do is :

@Test
public void name() {
    try (MockedStatic<LoggerFactory> integerMock = mockStatic(LoggerFactory.class)) {
        final Logger logger = mock(Logger.class);
        integerMock.when(() -> LoggerFactory.getLogger(any(Class.class))).thenReturn(logger);
        new Controller().log();
        verify(logger).warn(any());
    }
}

The two inportant aspect in this code, is that you need to scope when the static mock applies, i.e. within this try block. And you need to call the stubbing and verification api from the MockedStatic object.

@Mick, try to prepare the owner of the static field too, eg :

@PrepareForTest({GoodbyeController.class, LoggerFactory.class})

EDIT1 : I just crafted a small example. First the controller :

import org.slf4j.Logger;
import org.slf4j.LoggerFactory;

public class Controller {
    Logger logger = LoggerFactory.getLogger(Controller.class);

    public void log() { logger.warn("yup"); }
}

Then the test :

import org.junit.Test;
import org.junit.runner.RunWith;
import org.powermock.core.classloader.annotations.PrepareForTest;
import org.powermock.modules.junit4.PowerMockRunner;
import org.slf4j.Logger;
import org.slf4j.LoggerFactory;

import static org.mockito.Matchers.any;
import static org.mockito.Matchers.anyString;
import static org.mockito.Mockito.verify;
import static org.powermock.api.mockito.PowerMockito.mock;
import static org.powermock.api.mockito.PowerMockito.mockStatic;
import static org.powermock.api.mockito.PowerMockito.when;

@RunWith(PowerMockRunner.class)
@PrepareForTest({Controller.class, LoggerFactory.class})
public class ControllerTest {

    @Test
    public void name() throws Exception {
        mockStatic(LoggerFactory.class);
        Logger logger = mock(Logger.class);
        when(LoggerFactory.getLogger(any(Class.class))).thenReturn(logger);
        
        new Controller().log();
        
        verify(logger).warn(anyString());
    }
}

Note the imports ! Noteworthy libs in the classpath : Mockito, PowerMock, JUnit, logback-core, logback-clasic, slf4j

EDIT2 : As it seems to be a popular question, I'd like to point out that if these log messages are that important and require to be tested, i.e. they are feature / business part of the system then introducing a real dependency that make clear theses logs are features would be a so much better in the whole system design, instead of relying on static code of a standard and technical classes of a logger.

For this matter I would recommend to craft something like= a Reporter class with methods such as reportIncorrectUseOfYAndZForActionX or reportProgressStartedForActionX. This would have the benefit of making the feature visible for anyone reading the code. But it will also help to achieve tests, change the implementations details of this particular feature.

Hence you wouldn't need static mocking tools like PowerMock. In my opinion static code can be fine, but as soon as the test demands to verify or to mock static behavior it is necessary to refactor and introduce clear dependencies.

Another 2 very usefull shortcuts are to move lines selected up and down, like sublime text does...

{
  "key" : "ctrl+shift+down", "command" : "editor.action.moveLinesDownAction",
  "when" : "editorTextFocus && !editorReadonly"
},

and

{
  "key" : "ctrl+shift+up", "command" : "editor.action.moveLinesUpAction",
  "when" : "editorTextFocus && !editorReadonly"
}

Here is a simple solution

try adding this dependency

<dependency>
    <groupId>com.fasterxml.jackson.core</groupId>
    <artifactId>jackson-databind</artifactId>
    <version>2.8.3</version>
</dependency>

The tibble vignette has an updated way to change its default printing behavior:

You can control the default appearance with options:

options(tibble.print_max = n, tibble.print_min = m): if there are more than n rows, print only the first m rows. Use options(tibble.print_max = Inf) to always show all rows.

options(tibble.width = Inf) will always print all columns, regardless of the width of the screen.

examples

This will always print all rows:

options(tibble.print_max = Inf)

This will not actually limit the printing to 50 lines:

options(tibble.print_max = 50)

But this will restrict printing to 50 lines:

options(tibble.print_max = 50, tibble.print_min = 50)

I wrote a simpler loop that works too (note that all my values are unique):

HashMap<Character, String> myHashMap = new HashMap<Character, String>();
HashMap<String, Character> reversedHashMap = new HashMap<String, Character>();

for (char i : myHashMap.keySet()) {
    reversedHashMap.put(myHashMap.get(i), i);
}

from this tutorial: https://www.tutorialkart.com/opencv/python/opencv-python-get-image-size/

import cv2

# read image
img = cv2.imread('/home/ubuntu/Walnut.jpg', cv2.IMREAD_UNCHANGED)

# get dimensions of image
dimensions = img.shape

# height, width, number of channels in image

height = img.shape[0]
width = img.shape[1]
channels = img.shape[2]

from this other tutorial: https://www.pyimagesearch.com/2018/07/19/opencv-tutorial-a-guide-to-learn-opencv/

image = cv2.imread("jp.png")

(h, w, d) = image.shape

Please double check things before posting answers.

Just prepend sudo to the beginning of your command. As stated before, an installation runs some scripts that might be dangerous but I saw installing globally helps a lot and is way simpler.

Run sudo npm install -g less

A parse exception is a checked exception, so you must catch it with a try-catch when working with parsing Strings to Dates, as @miku suggested...

import { useClickAway } from "react-use";

useClickAway(ref, () => console.log('OUTSIDE CLICKED'));

The other offical way would be using git bundle

That will create a file that support git fetch and git pull in order to update your second repo.
Useful for incremental backup and restore.

But if you need to backup everything (because you do not have a second repo with some older content already in place), the backup is a bit more elaborate to do, as mentioned in my other answer, after Kent Fredric's comment:

$ git bundle create /tmp/foo master
$ git bundle create /tmp/foo-all --all
$ git bundle list-heads /tmp/foo
$ git bundle list-heads /tmp/foo-all

(It is an atomic operation, as opposed to making an archive from the .git folder, as commented by fantabolous)

Warning: I wouldn't recommend Pat Notz's solution, which is cloning the repo.
Backup many files is always more tricky than backing up or updating... just one.

If you look at the history of edits of the OP Yar answer, you would see that Yar used at first a clone --mirror, ... with the edit:

Using this with Dropbox is a total mess.
You will have sync errors, and you CANNOT ROLL A DIRECTORY BACK IN DROPBOX.
Use git bundle if you want to back up to your dropbox.

Yar's current solution uses git bundle.

I rest my case.

Mark Byers' answer is excellent, but I would just add the following:

The OutputDataReceived and ErrorDataReceived delegates need to be removed before the outputWaitHandle and errorWaitHandle get disposed. If the process continues to output data after the timeout has been exceeded and then terminates, the outputWaitHandle and errorWaitHandle variables will be accessed after being disposed.

(FYI I had to add this caveat as an answer as I couldn't comment on his post.)

It seems possible your class may have been using pre-standard C++. An easy way to tell, is to look at your old programs and check, do you see:

#include <iostream.h>

or

#include <iostream>

The former is pre-standard, and you'll be able to just say cout as opposed to std::cout without anything additional. You can get the same behavior in standard C++ by adding

using std::cout;

or

using namespace std;

Just one idea, anyway.

I have found the problem.

The problem was that the HTML I was trying to validate was not contained within a <form>...</form> tag.

As soon as I did that, I had a context that was not null.

You could try a combination of the waitfor and rasterize examples:

/**
 * See https://github.com/ariya/phantomjs/blob/master/examples/waitfor.js
 * 
 * Wait until the test condition is true or a timeout occurs. Useful for waiting
 * on a server response or for a ui change (fadeIn, etc.) to occur.
 *
 * @param testFx javascript condition that evaluates to a boolean,
 * it can be passed in as a string (e.g.: "1 == 1" or "$('#bar').is(':visible')" or
 * as a callback function.
 * @param onReady what to do when testFx condition is fulfilled,
 * it can be passed in as a string (e.g.: "1 == 1" or "$('#bar').is(':visible')" or
 * as a callback function.
 * @param timeOutMillis the max amount of time to wait. If not specified, 3 sec is used.
 */
function waitFor(testFx, onReady, timeOutMillis) {
    var maxtimeOutMillis = timeOutMillis ? timeOutMillis : 3000, //< Default Max Timout is 3s
        start = new Date().getTime(),
        condition = (typeof(testFx) === "string" ? eval(testFx) : testFx()), //< defensive code
        interval = setInterval(function() {
            if ( (new Date().getTime() - start < maxtimeOutMillis) && !condition ) {
                // If not time-out yet and condition not yet fulfilled
                condition = (typeof(testFx) === "string" ? eval(testFx) : testFx()); //< defensive code
            } else {
                if(!condition) {
                    // If condition still not fulfilled (timeout but condition is 'false')
                    console.log("'waitFor()' timeout");
                    phantom.exit(1);
                } else {
                    // Condition fulfilled (timeout and/or condition is 'true')
                    console.log("'waitFor()' finished in " + (new Date().getTime() - start) + "ms.");
                    typeof(onReady) === "string" ? eval(onReady) : onReady(); //< Do what it's supposed to do once the condition is fulfilled
                    clearInterval(interval); //< Stop this interval
                }
            }
        }, 250); //< repeat check every 250ms
};

var page = require('webpage').create(), system = require('system'), address, output, size;

if (system.args.length < 3 || system.args.length > 5) {
    console.log('Usage: rasterize.js URL filename [paperwidth*paperheight|paperformat] [zoom]');
    console.log('  paper (pdf output) examples: "5in*7.5in", "10cm*20cm", "A4", "Letter"');
    phantom.exit(1);
} else {
    address = system.args[1];
    output = system.args[2];
    if (system.args.length > 3 && system.args[2].substr(-4) === ".pdf") {
        size = system.args[3].split('*');
        page.paperSize = size.length === 2 ? {
            width : size[0],
            height : size[1],
            margin : '0px'
        } : {
            format : system.args[3],
            orientation : 'portrait',
            margin : {
                left : "5mm",
                top : "8mm",
                right : "5mm",
                bottom : "9mm"
            }
        };
    }
    if (system.args.length > 4) {
        page.zoomFactor = system.args[4];
    }
    var resources = [];
    page.onResourceRequested = function(request) {
        resources[request.id] = request.stage;
    };
    page.onResourceReceived = function(response) {
        resources[response.id] = response.stage;
    };
    page.open(address, function(status) {
        if (status !== 'success') {
            console.log('Unable to load the address!');
            phantom.exit();
        } else {
            waitFor(function() {
                // Check in the page if a specific element is now visible
                for ( var i = 1; i < resources.length; ++i) {
                    if (resources[i] != 'end') {
                        return false;
                    }
                }
                return true;
            }, function() {
               page.render(output);
               phantom.exit();
            }, 10000);
        }
    });
}

On OS X, choose "Document Format", and select all lines that you need format.

Then Option + Shift + F.

why not used sessionStorage?

"The sessionStorage object is equal to the localStorage object, except that it stores the data for only one session. The data is deleted when the user closes the browser window."

http://www.w3schools.com/html/html5_webstorage.asp

When you say "copy the contents of a variable", does that variable contain a file name, or does it contain a name of a file?

I'm assuming by your question that $var contains the contents you want to copy into the file:

$ echo "$var" > "$destdir"

This will echo the value of $var into a file called $destdir. Note the quotes. Very important to have "$var" enclosed in quotes. Also for "$destdir" if there's a space in the name. To append it:

$ echo "$var" >> "$destdir"

WORDPRESS is having this error mostly:
SOLUTION:
Locate your PHP installed directory on Remote live hosting SERVER or "Local Server"
In case of Windows os
for example if you using xampp or wamp webserver. it will be in xammp directory 'c:\xammp\php'
Note: For Unix/Linux OS, locate your PHP directory in Webserver

Find & Edit PHP.INI file
Find 'allow_url_include'
replace it with value 'on'
allow_url_include=On
Save you php.ini & RESTART you web-server.

I blindly followed the accepted answer of using pip3 freeze > requirements.txt

It generated a huge file that listed all the dependencies of the entire solution, which is not what I wanted.

So you need to figure out what sort of requirements.txt you are trying to generate.

If you need a requirements.txt file that has ALL the dependencies, then use the pip3

pip3 freeze > requirements.txt

However, if you want to generate a minimal requirements.txt that only lists the dependencies you need, then use the pipreqs package. Especially helpful if you have numerous requirements.txt files in per component level in the project and not a single file on the solution wide level.

pip install pipreqs
pipreqs [path to folder]
e.g. pipreqs .

If you need to store null characters in text fields and don't want to change your data type other than text then you can follow my solution too:

Before insert:

myValue = myValue.replaceAll("\u0000", "SomeVerySpecialText")

After select:

myValue = myValue.replaceAll("SomeVerySpecialText","\u0000")

I've used "null" as my SomeVerySpecialText which I am sure that there will be no any "null" string in my values at all.

maybe ZSI which implements SOAP. I used the stub generator and It worked properly. The only problem I encountered is about doing SOAP throught HTTPS.

I had the same problem, and finally I found that I forgot to add the selenium-server-standalone-version.jar. I had only added the client jar, selenium-java-version.jar.

Hope this helps.

They have a different human-readable meaning.

However, depending on the query optimizer, they may have the same meaning to the machine.

You should always code to be readable.

That is to say, if this is a built-in relationship, use the explicit join. if you are matching on weakly related data, use the where clause.

I faced the same problem but on Ubuntu Server. So all I did is changed to superuser before I activate virtual environment for django and then I ran the django server. It worked fine for me.

First copy paste

sudo su

Then activate the virtual environment if you have one.

source myvenv/bin/activate

At last run your django server.

python3 manage.py runserver

Hope, this will help you.

Installing maven in Amazon Linux / redhat

--> sudo wget http://repos.fedorapeople.org/repos/dchen/apache-maven/epel-apache-maven.repo -O /etc/yum.repos.d/epel-apache-maven.repo

--> sudo sed -i s/\$releasever/6/g /etc/yum.repos.d/epel-apache-maven.repo

-->sudo yum install -y apache-maven

--> mvn --version

Output looks like

Apache Maven 3.5.2 (138edd61fd100ec658bfa2d307c43b76940a5d7d; 2017-10-18T07:58:13Z) Maven home: /usr/share/apache-maven Java version: 1.8.0_171, vendor: Oracle Corporation Java home: /usr/lib/jvm/java-1.8.0-openjdk-1.8.0.171-8.b10.amzn2.x86_64/jre Default locale: en_US, platform encoding: UTF-8 OS name: "linux", version: "4.14.47-64.38.amzn2.x86_64", arch: "amd64", family: "unix"

*If its thrown error related to java please follow the below step to update java 8 *

Installing java 8 in amazon linux/redhat

--> yum search java | grep openjdk

--> yum install java-1.8.0-openjdk-headless.x86_64

--> yum install java-1.8.0-openjdk-devel.x86_64

--> update-alternatives --config java #pick java 1.8 and press 1

--> update-alternatives --config javac #pick java 1.8 and press 2

Thank You

You could convert your integer into a string. As the minus sign will not match the digits, you will have no negative years.

You can use @TestPropertySource to load different properties/yaml file

@TestPropertySource(locations="classpath:test.properties")
@RunWith(SpringJUnit4ClassRunner.class)
@SpringApplicationConfiguration(Application.class)
public class MyIntTest{

}

OR if you want to override only specific properties/yaml you can use

@TestPropertySource(
        properties = {
                "spring.jpa.hibernate.ddl-auto=validate",
                "liquibase.enabled=false"
        }
)

clientX/Y refers to relative screen coordinates, for instance if your web-page is long enough then clientX/Y gives clicked point's coordinates location in terms of its actual pixel position while ScreenX/Y gives the ordinates in reference to start of page.

This isn't in the boto3 documentation. This worked for me:

object.get()["Body"].read()

object being an s3 object: http://boto3.readthedocs.org/en/latest/reference/services/s3.html#object

Not OP's case, but - for anyone who wants to assert intersection in dicts and ended up here due to poor googling (e.g. me) - you need to work with dict.items:

>>> a = {'key': 'value'}
>>> b = {'key': 'value', 'extra_key': 'extra_value'}
>>> all(item in a.items() for item in b.items())
True
>>> all(item in b.items() for item in a.items())
False

That's because dict.items returns tuples of key/value pairs, and much like any object in Python, they're interchangeably comparable

Consider the following example,

    import import { AfterViewInit, ViewChild } from '@angular/core';
    import { Component } from '@angular/core';
    import { CountdownTimerComponent }  from './countdown-timer.component';
    @Component({
        selector: 'app-countdown-parent-vc',
        templateUrl: 'app-countdown-parent-vc.html',
        styleUrl: [app-countdown-parent-vc.css]
    export class CreateCategoryComponent implements OnInit {
         @ViewChild(CountdownTimerComponent, {static: false})
         private timerComponent: CountdownTimerComponent;
         ngAfterViewInit() {
             this.timerComponent.startTimer();
         }

         submitNewCategory(){
            this.ngAfterViewInit();     
         }

Read more about @ViewChild here.

Most of the solutions consider that the lists do not have duplicates. In case your lists do have duplicates you can try this:

def isSubList(subList,mlist):
    uniqueElements=set(subList)
    for e in uniqueElements:
        if subList.count(e) > mlist.count(e):
            return False     
    # It is sublist
    return True

It ensures the sublist never has different elements than list or a greater amount of a common element.

lst=[1,2,2,3,4]
sl1=[2,2,3]
sl2=[2,2,2]
sl3=[2,5]

print(isSubList(sl1,lst)) # True
print(isSubList(sl2,lst)) # False
print(isSubList(sl3,lst)) # False

Try using the success() call back

$http.get('/Documents/DocumentsList/' + caseId).success(function (result) {
    $scope.Documents = result;
});

But now since Documents is an array and not a promise, remove the ()

<li ng-repeat="document in Documents" ng-class="IsFiltered(document.Filtered)"> <span>
           <input type="checkbox" name="docChecked" id="doc_{{document.Id}}" ng-model="document.Filtered" />
        </span>
 <span>{{document.Name}}</span>

</li>

Using __doPostBack directly is sooooo the 2000s. Anybody coding WebForms in 2018 uses GetPostBackEventReference

(More seriously though, adding this as an answer for completeness. Using the __doPostBack directly is bad practice (single underscore prefix typically indicates a private member and double indicates a more universal private member), though it probably won't change or become obsolete at this point. We have a fully supported mechanism in ClientScriptManager.GetPostBackEventReference.)

Assuming your btnRefresh is inside our UpdatePanel and causes a postback, you can use GetPostBackEventReference like this (inspiration):

function RefreshGrid() {
    <%= ClientScript.GetPostBackEventReference(btnRefresh, String.Empty) %>;
}

Rather than convert image to bitmap and then rotate it try to rotate direct image view like below code.

ImageView myImageView = (ImageView)findViewById(R.id.my_imageview);

AnimationSet animSet = new AnimationSet(true);
animSet.setInterpolator(new DecelerateInterpolator());
animSet.setFillAfter(true);
animSet.setFillEnabled(true);

final RotateAnimation animRotate = new RotateAnimation(0.0f, -90.0f,
    RotateAnimation.RELATIVE_TO_SELF, 0.5f, 
    RotateAnimation.RELATIVE_TO_SELF, 0.5f);

animRotate.setDuration(1500);
animRotate.setFillAfter(true);
animSet.addAnimation(animRotate);

myImageView.startAnimation(animSet);

parent.location.hash = "hello";

if the data is the result of a formula, then it will never be empty (even if you set it to ""), as having a formula is not the same as an empty cell

There are 2 methods, depending on how static the data is.

The easiest fix is to clear the cells that return empty strings, but that means you will have to fix things if data changes

the other fix involves a little editing of the formula, so instead of setting it equal to "", you set it equal to NA().
For example, if you have =IF(A1=0,"",B1/A1), you would change that to =IF(A1=0,NA(),B1/A1).
This will create the gaps you desire, and will also reflect updates to the data so you don't have to keep fixing it every time

1. Use dashed border style for outline.
2. Draw background-color with :before or :after pseudo element.

Note: This method will allow you to have maximum browser support.

Output Image:

* {box-sizing: border-box;}_x000D_
_x000D_
.box {_x000D_
  border: 1px dashed #fff;_x000D_
  position: relative;_x000D_
  height: 160px;_x000D_
  width: 350px;_x000D_
  margin: 20px;_x000D_
}_x000D_
_x000D_
.box:before {_x000D_
  position: absolute;_x000D_
  background: black;_x000D_
  content: '';_x000D_
  bottom: -10px;_x000D_
  right: -10px;_x000D_
  left: -10px;_x000D_
  top: -10px;_x000D_
  z-index: -1;_x000D_
}

<div class="box">_x000D_
_x000D_
</div>

You can verify the number of visible cells using this function:

- (NSArray *)visibleCells

This method will return an array with the cells that are visible, so you can count the number of objects in this array and compare with the number of objects in your table.. if it's equal.. you can disable the scrolling using:

tableView.scrollEnabled = NO;

As @Ginny mentioned.. we would can have problems with partially visible cells, so this solution works better in this case:

tableView.scrollEnabled = (tableView.contentSize.height <= CGRectGetHeight(tableView.frame));

In case you are using autoLayout this solution do the job:

tableView.alwaysBounceVertical = NO.

Native JSON support has been included in PHP since 5.2 in the form of methods json_encode() and json_decode(). You would use the first to output a PHP variable in JSON.

A normal broadcast Intent is not available anymore after is was send and processed by the system. If you use the sendStickyBroadcast(Intent) method, the Intent is sticky, meaning the Intent you are sending stays around after the broadcast is complete.

you refer to my blog:enter link description here

by using replaceChild():

<html>
<head>
</head>
<body>
  <div>
    <a id="myAnchor" href="http://www.stackoverflow.com">StackOverflow</a>
  </div>
<script type="text/JavaScript">
  var myAnchor = document.getElementById("myAnchor");
  var mySpan = document.createElement("span");
  mySpan.innerHTML = "replaced anchor!";
  myAnchor.parentNode.replaceChild(mySpan, myAnchor);
</script>
</body>
</html>

RRULE standard is built for exactly this requirement i.e. saving and understanding recurrences. Microsoft and google both use it in their calendar events. Please go through this document for more details. https://icalendar.org/iCalendar-RFC-5545/3-8-5-3-recurrence-rule.html

Because my edits to the above were rejected (did any of you actually try?), here's what you really need to make this work:

Windows (And Mac Office 2011+):

• Unix Timestamp = (Excel Timestamp - 25569) * 86400
• Excel Timestamp = (Unix Timestamp / 86400) + 25569

MAC OS X (pre Office 2011):

• Unix Timestamp = (Excel Timestamp - 24107) * 86400
• Excel Timestamp = (Unix Timestamp / 86400) + 24107

Answer for BigDecimal throws ArithmeticException

public static void main(String[] args) {
        int age = 30;
        BigDecimal retireMentFund = new BigDecimal("10000.00");
        retireMentFund.setScale(2,BigDecimal.ROUND_HALF_UP);
        BigDecimal yearsInRetirement = new BigDecimal("20.00");
        String name = " Dennis";
        for ( int i = age; i <=65; i++){
            recalculate(retireMentFund,new BigDecimal("0.10"));
        }
        BigDecimal monthlyPension =   retireMentFund.divide(
                yearsInRetirement.divide(new BigDecimal("12"), new MathContext(2, RoundingMode.CEILING)), new MathContext(2, RoundingMode.CEILING));      
        System.out.println(name+ " will have £" + monthlyPension +" per month for retirement");
    }
public static void recalculate (BigDecimal fundAmount, BigDecimal rate){
        fundAmount.multiply(rate.add(new BigDecimal("1.00")));
    }

Add MathContext object in your divide method call and adjust precision and rounding mode. This should fix your problem

Please try this... This works for me..

In adapter,take a sparse boolean array.

SparseBooleanArray sparseBooleanArray;

In constructor initialise this,

   sparseBooleanArray=new SparseBooleanArray();

In bind holder add,

@Override
public void onBindViewHolder(DispositionViewHolder holder, final int position) {
   holder.tv_disposition.setText(dispList.get(position).getName());
    if(sparseBooleanArray.get(position,false))
    {
        holder.rd_disp.setChecked(true);
    }
    else
    {
        holder.rd_disp.setChecked(false);


    }
    setClickListner(holder,position);
}

private void setClickListner(final DispositionViewHolder holder, final int position) {
    holder.rd_disp.setOnClickListener(new View.OnClickListener() {
        @Override
        public void onClick(View v) {
            sparseBooleanArray.clear();
            sparseBooleanArray.put(position, true);
            notifyDataSetChanged();


        }
    });
}

rd_disp is radio button in xml file.

So when the recycler view load the items,in bindView Holder it check whether the sparseBooleanArray contain the value "true" correspnding to its position.

If the value returned is true then we set the radio button selection true.Else we set the selection false. In onclickHolder I have cleared the sparseArray and set the value true corresponding to that position. When I call notify datasetChange it again call the onBindViewHolder and the condition are checked again. This makes our selection to only select particular radio.

My AccessKey had some special characters in that were not properly escaped.

I didn't check for special characters when I did the copy/paste of the keys. Tripped me up for a few mins.

A simple backslash fixed it. Example (not my real access key obviously):

secretAccessKey: 'Gk/JCK77STMU6VWGrVYa1rmZiq+Mn98OdpJRNV614tM'

becomes

secretAccessKey: 'Gk\/JCK77STMU6VWGrVYa1rmZiq\+Mn98OdpJRNV614tM'

After some experimenting, I think the algorithm for LinearLayout is this:

Assume that weightSum is set to a value. The case of absence is discussed later.

First, divide the weightSum by the number of elements whith match_parent or fill_parent in the dimension of the LinearLayout (e.g. layout_width for orientation="horizontal"). We will call this value the weight multiplier for each element. The default value for weightSum is 1.0, so the default weight multiplier is 1/n, where n is the number of fill_parent elements; wrap_content elements do not contribute to n.

E.g. when weightSum is 60, and there are 3 fill_parent elements, the weight multiplier is 20. The weight multiplier is the default value for e.g. layout_width if the attribute is absent.

Second, the maximum possible expansion of every element is computed. First, the wrap_content elements are computed according to their contents. Their expansion is deducted from the expansion of the parent container. We will call the remainer expansion_remainer. This remainder is distributed among fill_parent elements according to their layout_weight.

Third, the expansion of every fill_parent element is computed as:

Example:

If weightSum is 60, and there are 3 fill_parent elements with the weigths 10, 20 and 30, their expansion on the screen is 2/3, 1/3 and 0/3 of the parent container.

weight | expansion
     0 | 3/3
    10 | 2/3
    20 | 1/3
    30 | 0/3
    40 | 0/3

The minimum expansion is capped at 0. The maximum expansion is capped at parent size, i.e. weights are capped at 0.

If an element is set to wrap_content, its expansion is calculated first, and the remaining expansion is subject to distribution among the fill_parent elements. If weightSum is set, this leads to layout_weight having no effect on wrap_content elements. However, wrap_content elements can still be pushed out of the visible area by elements whose weight is lower than (e.g. between 0-1 for weightSum= 1 or between 0-20 for the above example).

If no weightSum is specified, it is computed as the sum of all layout_weight values, including elements with wrap_content set! So having layout_weight set on wrap_content elements, can influence their expansion. E.g. a negative weight will shrink the other fill_parent elements. Before the fill_parent elements are laid out, will the above formula be applied to wrap_content elements, with maximum possible expansion being their expansion according to the wrapped content. The wrap_content elements will be shrunk, and afterwards the maximum possible expansion for the remaining fill_parent elements is computed and distributed.

This can lead to unintuitive results.

The Oracle SQL developer is not supported by the 64bit JDK. To resolve this issue:

1. Install a 32bit JDK (x86)
2. Update your SQL developer config file (It should now point to the new 32bit JDK).
3. Edit the sqldeveloper.conf, which can be found under {ORACLE_HOME}\sqldeveloper\sqldeveloper\bin\sqldeveloper.conf
4. Make sure SetJavaHome is pointing to your 32bit JDK.

For example:

SetJavaHome C:\Program Files (x86) \Java\jdk1.6.0_13

Lots of the above helped for me, plus the accepted answer, but since I was on an EC2 instance, I had no idea what my instance name was. Finally, I opened SQLServer Configuration Manager and in the Name column, use whatever is there as your connection server, so in my case, .\EC2SQLEXPRESS and worked great!

Yet another catch I ran into: ensure your Installer derived class (typically ProjectInstaller) is at the top of the namespace hierarchy, I tried to use a public class within another public class, but this results in the same old error:

No public installers with the RunInstallerAttribute.Yes attribute could be found

as.character() would be the general way rather than use paste() for its side effect

> v <- 20081101
> date <- as.Date(as.character(v), format = "%Y%m%d")
> date
[1] "2008-11-01"

(I presume this is a simple example and something like this:

v <- "20081101"

isn't possible?)

You don't want regular expressions here.

s = "144,1231693144,26959535291011309493156476344723991336010898738574164086137773096960,26959535291011309493156476344723991336010898738574164086137773096960,1.00,4295032833,1563,2747941 288,1231823695,26959535291011309493156476344723991336010898738574164086137773096960,26959535291011309493156476344723991336010898738574164086137773096960,1.00,4295032833,909,4725008"

print s.split(',')

Gives you:

['144', '1231693144', '26959535291011309493156476344723991336010898738574164086137773096960', '26959535291011309493156476344723991336010898738574164086137773096960', '1.00
', '4295032833', '1563', '2747941 288', '1231823695', '26959535291011309493156476344723991336010898738574164086137773096960', '26959535291011309493156476344723991336010898
738574164086137773096960', '1.00', '4295032833', '909', '4725008']

A property that has only a getter is said to be readonly. Cause no setter is provided, to change the value of the property (from outside).

C# has has a keyword readonly, that can be used on fields (not properties). A field that is marked as "readonly", can only be set once during the construction of an object (in the constructor).

private string _name = "Foo"; // field for property Name;
private bool _enabled = false; // field for property Enabled;

public string Name{ // This is a readonly property.
  get {
    return _name;  
  }
}

public bool Enabled{ // This is a read- and writeable property.
  get{
    return _enabled;
  }
  set{
    _enabled = value;
  }
} 

As we want to only separate lines, and the writelines function in python does not support adding separator between lines, I have written the simple code below which best suits this problem:

sep = "\n" # defining the separator
new_lines = sep.join(lines) # lines as an iterator containing line strings

and finally:

with open("file_name", 'w') as file:
    file.writelines(new_lines)

and you are done.

The first way is "more correct", what intention could there be to express? If the code ends, it ends. That's pretty clear, in my opinion.

I don't understand what could possibly be confusing and need clarification. If there's no looping construct being used, then what could possibly happen other than that the function stops executing?

I would be severly annoyed by such a pointless extra return statement at the end of a void function, since it clearly serves no purpose and just makes me feel the original programmer said "I was confused about this, and now you can be too!" which is not very nice.

You can exclude like this, the regex 'or' symbol, assuming a file you want doesn't have the same name as a folder you're excluding.

$exclude = 'dir1|dir2|dir3'
ls -r | where { $_.fullname -notmatch $exclude }

ls -r -dir | where fullname -notmatch 'dir1|dir2|dir3'

Added capability for rounded corners to Adam Waite's original post, and the multiple edits

Important!: Don't forgot to add 'label.layoutIfNeeded()' right before calling 'addborder' as previously commented

Note: I've only tested this on UILabels.

extension CALayer {
    
    enum BorderSide {
        case top
        case right
        case bottom
        case left
        case notRight
        case notLeft
        case topAndBottom
        case all
    }
    
    enum Corner {
        case topLeft
        case topRight
        case bottomLeft
        case bottomRight
    }
    
    func addBorder(side: BorderSide, thickness: CGFloat, color: CGColor, maskedCorners: CACornerMask? = nil) {
        var topWidth = frame.size.width; var bottomWidth = topWidth
        var leftHeight = frame.size.height; var rightHeight = leftHeight
        
        var topXOffset: CGFloat = 0; var bottomXOffset: CGFloat = 0
        var leftYOffset: CGFloat = 0; var rightYOffset: CGFloat = 0
        
        // Draw the corners and set side offsets
        switch maskedCorners {
        case [.layerMinXMinYCorner, .layerMaxXMinYCorner]: // Top only
            addCorner(.topLeft, thickness: thickness, color: color)
            addCorner(.topRight, thickness: thickness, color: color)
            topWidth -= cornerRadius*2
            leftHeight -= cornerRadius; rightHeight -= cornerRadius
            topXOffset = cornerRadius; leftYOffset = cornerRadius; rightYOffset = cornerRadius
            
        case [.layerMinXMaxYCorner, .layerMaxXMaxYCorner]: // Bottom only
            addCorner(.bottomLeft, thickness: thickness, color: color)
            addCorner(.bottomRight, thickness: thickness, color: color)
            bottomWidth -= cornerRadius*2
            leftHeight -= cornerRadius; rightHeight -= cornerRadius
            bottomXOffset = cornerRadius
            
        case [.layerMinXMinYCorner, .layerMinXMaxYCorner]: // Left only
            addCorner(.topLeft, thickness: thickness, color: color)
            addCorner(.bottomLeft, thickness: thickness, color: color)
            topWidth -= cornerRadius; bottomWidth -= cornerRadius
            leftHeight -= cornerRadius*2
            leftYOffset = cornerRadius; topXOffset = cornerRadius; bottomXOffset = cornerRadius;
            
        case [.layerMaxXMinYCorner, .layerMaxXMaxYCorner]: // Right only
            addCorner(.topRight, thickness: thickness, color: color)
            addCorner(.bottomRight, thickness: thickness, color: color)
            topWidth -= cornerRadius; bottomWidth -= cornerRadius
            rightHeight -= cornerRadius*2
            rightYOffset = cornerRadius
            
        case [.layerMaxXMinYCorner, .layerMaxXMaxYCorner,  // All
              .layerMinXMaxYCorner, .layerMinXMinYCorner]:
            addCorner(.topLeft, thickness: thickness, color: color)
            addCorner(.topRight, thickness: thickness, color: color)
            addCorner(.bottomLeft, thickness: thickness, color: color)
            addCorner(.bottomRight, thickness: thickness, color: color)
            topWidth -= cornerRadius*2; bottomWidth -= cornerRadius*2
            topXOffset = cornerRadius; bottomXOffset = cornerRadius
            leftHeight -= cornerRadius*2; rightHeight -= cornerRadius*2
            leftYOffset = cornerRadius; rightYOffset = cornerRadius
            
        default: break
        }
        
        // Draw the sides
        switch side {
        case .top:
            addLine(x: topXOffset, y: 0, width: topWidth, height: thickness, color: color)
            
        case .right:
            addLine(x: frame.size.width - thickness, y: rightYOffset, width: thickness, height: rightHeight, color: color)
            
        case .bottom:
            addLine(x: bottomXOffset, y: frame.size.height - thickness, width: bottomWidth, height: thickness, color: color)
            
        case .left:
            addLine(x: 0, y: leftYOffset, width: thickness, height: leftHeight, color: color)

        // Multiple Sides
        case .notRight:
            addLine(x: topXOffset, y: 0, width: topWidth, height: thickness, color: color)
            addLine(x: 0, y: leftYOffset, width: thickness, height: leftHeight, color: color)
            addLine(x: bottomXOffset, y: frame.size.height - thickness, width: bottomWidth, height: thickness, color: color)

        case .notLeft:
            addLine(x: topXOffset, y: 0, width: topWidth, height: thickness, color: color)
            addLine(x: frame.size.width - thickness, y: rightYOffset, width: thickness, height: rightHeight, color: color)
            addLine(x: bottomXOffset, y: frame.size.height - thickness, width: bottomWidth, height: thickness, color: color)

        case .topAndBottom:
            addLine(x: topXOffset, y: 0, width: topWidth, height: thickness, color: color)
            addLine(x: bottomXOffset, y: frame.size.height - thickness, width: bottomWidth, height: thickness, color: color)

        case .all:
            addLine(x: topXOffset, y: 0, width: topWidth, height: thickness, color: color)
            addLine(x: frame.size.width - thickness, y: rightYOffset, width: thickness, height: rightHeight, color: color)
            addLine(x: bottomXOffset, y: frame.size.height - thickness, width: bottomWidth, height: thickness, color: color)
            addLine(x: 0, y: leftYOffset, width: thickness, height: leftHeight, color: color)
        }
    }
    
    private func addLine(x: CGFloat, y: CGFloat, width: CGFloat, height: CGFloat, color: CGColor) {
        let border = CALayer()
        border.frame = CGRect(x: x, y: y, width: width, height: height)
        border.backgroundColor = color
        addSublayer(border)
    }
    
    private func addCorner(_ corner: Corner, thickness: CGFloat, color: CGColor) {
        // Set default to top left
        let width = frame.size.width; let height = frame.size.height
        var x = cornerRadius
        var y = cornerRadius
        var startAngle: CGFloat = .pi; var endAngle: CGFloat = .pi*3/2
        
        switch corner {
        case .bottomLeft:
            y = height - cornerRadius 
            startAngle = .pi/2; endAngle = .pi
            
        case .bottomRight:
            x = width - cornerRadius
            y = height - cornerRadius
            startAngle = 0; endAngle = .pi/2
            
        case .topRight:
            x = width - cornerRadius
            startAngle = .pi*3/2; endAngle = 0
            
        default: break
        }
        
        let cornerPath = UIBezierPath(arcCenter: CGPoint(x: x, y: y),
                                      radius: cornerRadius - thickness,
                                      startAngle: startAngle,
                                      endAngle: endAngle,
                                      clockwise: true)

        let cornerShape = CAShapeLayer()
        cornerShape.path = cornerPath.cgPath
        cornerShape.lineWidth = thickness
        cornerShape.strokeColor = color
        cornerShape.fillColor = nil
        addSublayer(cornerShape)
    }
}

Working perfectly.This exmple will help alot.

<script>    
    function check()
    {
       var val = frm1.uname.value;
       //alert(val);
       if (val.indexOf("@") > 0)
       {
          alert ("email");
          document.getElementById('isEmail1').value = true;
          //alert( document.getElementById('isEmail1').value);
       }else {
          alert("usernam");
          document.getElementById('isEmail1').value = false;
          //alert( document.getElementById('isEmail1').value);
       }
    }
</script>

<body>
    <h1>My form </h1>
    <form action="v1.0/user/login" method="post" id = "frm1">
        <p>
            UserName : <input type="text" id = "uname" name="username" />
        </p>
        <p>
            Password : <input type="text" name="password" />
        </p>
        <p>
            <input type="hidden" class="email" id = "isEmail1" name = "isEmail"/>
        </p>
        <input type="submit" id = "submit" value="Add User" onclick="return check();"/>
    </form>
</body>

There is something wrong with your code.

position : absolute makes the element on top irrespective of other elements in the same page. But the position not relative to the scroll

This can be solved with position : fixed This property will make the element position fixed and still relative to the scroll.

Or

You can check it out Here

Yes. Internally it is implemented as open hashing based on a primitive polynomial over Z/2 (source).

If you are using Eclipse then you can do this by specifying the required size for the particular application in its Run Configuration's VM Arguments as EX: -Xms128m -Xmx512m

Or if you want all applications running from your eclipse to have the same specified size then you can specify this in the eclipse.ini file which is present in your Eclipse home directory.

To get the size of the JVM during Runtime you can use Runtime.totalMemory() which returns the total amount of memory in the Java virtual machine, measured in bytes.

    int scrWidth  = getWindowManager().getDefaultDisplay().getWidth();
    int scrHeight = getWindowManager().getDefaultDisplay().getHeight();

Look in your JBoss bin folder for the file run.bat (run.sh on Unix)

look for the line set JAVA_OPTS, (or just JAVA_OPTS on Unix) at the end of that line add -Xmx512m. Change the number to the amount of memory you want to allocate to JBoss.

If you are using a custom script to start your jboss instance, you can add the set JAVA_OPTS option there as well.

I faced this exception for a long time and was not able to pinpoint the problem. The exception says line 1 column 9. The mistake I did is to get the first line of the file which flume is processing.

Apache flume process the content of the file in patches. So, when flume throws this exception and says line 1, it means the first line in the current patch.

If your flume agent is configured to use batch size = 100, and (for example) the file contains 400 lines, this means the exception is thrown in one of the following lines 1, 101, 201,301.

How to discover the line which causes the problem?

You have three ways to do that.

1- pull the source code and run the agent in debug mode. If you are an average developer like me and do not know how to make this, check the other two options.

2- Try to split the file based on the batch size and run the flume agent again. If you split the file into 4 files, and the invalid json exists between lines 301 and 400, the flume agent will process the first 3 files and stop at the fourth file. Take the fourth file and again split it into more smaller files. continue the process until you reach a file with only one line and flume fails while processing it.

3- Reduce the batch size of the flume agent to only one and compare the number of processed events in the output of the sink you are using. For example, in my case I am using Solr sink. The file contains 400 lines. The flume agent is configured with batch size=100. When I run the flume agent, it fails at some point and throw that exception. At this point check how many documents are ingested in Solr. If the invalid json exists at line 346, the number of documents indexed into Solr will be 345, so the next line is the line which causes the problem.

In my case I followed the third option and fortunately I pinpoint the line which causes the problem.

This is a long answer but it actually does not solve the exception. How I overcome this exception?

I have no idea why Jackson library complain while parsing a json string contains escaped characters \n \r \t. I think (but I am not sure) the Jackson parser is by default escaping these characters which cases the json string to be split into two lines (in case of \n) and then it deals each line as a separate json string.

In my case we used a customized interceptor to remove these characters before being processed by the flume agent. This is the way we solved this problem.

This expression should do what you want to achieve.

dataSource.StateList.Where(s => countryCodes.Contains(s.CountryCode))

Try this in the console:

JSON.parse(undefined)

Here is what you will get:

Uncaught SyntaxError: Unexpected token u in JSON at position 0
    at JSON.parse (<anonymous>)
    at <anonymous>:1:6

In other words, your app is attempting to parse undefined, which is not valid JSON.

There are two common causes for this. The first is that you may be referencing a non-existent property (or even a non-existent variable if not in strict mode).

window.foobar = '{"some":"data"}';
JSON.parse(window.foobarn)  // oops, misspelled!

The second common cause is failure to receive the JSON in the first place, which could be caused by client side scripts that ignore errors and send a request when they shouldn't.

Make sure both your server-side and client-side scripts are running in strict mode and lint them using ESLint. This will give you pretty good confidence that there are no typos.

You can do it by making the background into a pattern:

<defs>
  <pattern id="img1" patternUnits="userSpaceOnUse" width="100" height="100">
    <image href="wall.jpg" x="0" y="0" width="100" height="100" />
  </pattern>
</defs>

Adjust the width and height according to your image, then reference it from the path like this:

<path d="M5,50
         l0,100 l100,0 l0,-100 l-100,0
         M215,100
         a50,50 0 1 1 -100,0 50,50 0 1 1 100,0
         M265,50
         l50,100 l-100,0 l50,-100
         z"
  fill="url(#img1)" />

Working example

If you want the two divs to be displayed one above the other, the simplest answer is to remove the float: left;from the css declaration, as this causes them to collapse to the size of their contents (or the css defined size), and, well float up against each other.

Alternatively, you could simply add clear:both; to the divs, which will force the floated content to clear previous floats.

Definitely it's blocking because of your use of urllib based on the user agent. This same thing is happening to me with OfferUp. You can create a new class called AppURLopener which overrides the user-agent with Mozilla.

import urllib.request

class AppURLopener(urllib.request.FancyURLopener):
    version = "Mozilla/5.0"

opener = AppURLopener()
response = opener.open('http://httpbin.org/user-agent')

Source

This is easier in Java 9:

    Duration elapsedTime = Duration.ofMillis(millisDiff );
    String humanReadableElapsedTime = String.format(
            "%d hours, %d mins, %d seconds",
            elapsedTime.toHours(),
            elapsedTime.toMinutesPart(),
            elapsedTime.toSecondsPart());

This produces a string like 0 hours, 39 mins, 9 seconds.

If you want to round to whole seconds before formatting:

    elapsedTime = elapsedTime.plusMillis(500).truncatedTo(ChronoUnit.SECONDS);

To leave out the hours if they are 0:

    long hours = elapsedTime.toHours();
    String humanReadableElapsedTime;
    if (hours == 0) {
        humanReadableElapsedTime = String.format(
                "%d mins, %d seconds",
                elapsedTime.toMinutesPart(),
                elapsedTime.toSecondsPart());

    } else {
        humanReadableElapsedTime = String.format(
                "%d hours, %d mins, %d seconds",
                hours,
                elapsedTime.toMinutesPart(),
                elapsedTime.toSecondsPart());
    }

Now we can have for example 39 mins, 9 seconds.

To print minutes and seconds with leading zero to make them always two digits, just insert 02 into the relevant format specifiers, thus:

    String humanReadableElapsedTime = String.format(
            "%d hours, %02d mins, %02d seconds",
            elapsedTime.toHours(),
            elapsedTime.toMinutesPart(),
            elapsedTime.toSecondsPart());

Now we can have for example 0 hours, 39 mins, 09 seconds.

By running the mock-server on 0.0.0.0
Note: This works on Expo when you are running another server using json-server.

Another approach is to run the mock server on 0.0.0.0 instead of localhost or 127.0.0.1.

This makes the mock server accessible on the LAN and because Expo requires the development machine and the mobile running the Expo app to be on the same network the mock server becomes accessible too.

This can be achieved with the following command when using json-server

json-server --host 0.0.0.0 --port 8000 ./db.json --watch

Visit this link for more information.

MySQL has discontinued drop database command from mysql client shell. Need to use mysqladmin to drop a database.

An output stream is generally related to some data destination like a file or a network etc.In java output stream is a destination where data is eventually written and it ends

import java.io.printstream;

class PPrint {
    static PPrintStream oout = new PPrintStream();
}

class PPrintStream {
    void print(String str) { 
        System.out.println(str)
    }
}

class outputstreamDemo {
    public static void main(String args[]) {
        System.out.println("hello world");
        System.out.prinln("this is output stream demo");
    }
}

    // acos(0.0) will return value of pi/2, inverse of cos(0) is pi/2 
    double pi = 2 * acos(0.0);
    int n; // upto 6 digit
    scanf("%d",&n); //precision with which you want the value of pi
    printf("%.*lf\n",n,pi); // * will get replaced by n which is the required precision

If you want to display for example all .config (or .ini) file name and file content into one doc for user reference (and by this I mean user not knowing shell command i.e. 95% of them), you can try this :

FORFILES /M *myFile.ini /C "cmd /c echo File name : @file >> %temp%\stdout.txt && type @path >> %temp%\stdout.txt && echo. >> %temp%\stdout.txt" | type %temp%\stdout.txt

Explanation :

• ForFiles : loop on a directory (and child, etc) each file meeting criteria
  • able to return the current file name being process (@file)
  • able to return the full path file being process (@path)
• Type : Output the file content

Ps : The last pipe command is pointing the %temp% file and output the aggregate content. If you wish to copy/paste in some documentation, just open the stdout.txt file in textpad.

Have a look at the Python tutorial on tuples:

A special problem is the construction of tuples containing 0 or 1 items: the syntax has some extra quirks to accommodate these. Empty tuples are constructed by an empty pair of parentheses; a tuple with one item is constructed by following a value with a comma (it is not sufficient to enclose a single value in parentheses). Ugly, but effective. For example:

>>> empty = ()
>>> singleton = 'hello',    # <-- note trailing comma
>>> len(empty)
0
>>> len(singleton)
1
>>> singleton
('hello',)

If you put just a pair of parentheses around your string object, they will only turn that expression into an parenthesized expression (emphasis added):

A parenthesized expression list yields whatever that expression list yields: if the list contains at least one comma, it yields a tuple; otherwise, it yields the single expression that makes up the expression list.

An empty pair of parentheses yields an empty tuple object. Since tuples are immutable, the rules for literals apply (i.e., two occurrences of the empty tuple may or may not yield the same object).

Note that tuples are not formed by the parentheses, but rather by use of the comma operator. The exception is the empty tuple, for which parentheses are required — allowing unparenthesized “nothing” in expressions would cause ambiguities and allow common typos to pass uncaught.

That is (assuming Python 2.7),

a = 'Quattro TT'
print tuple(a)        # <-- you create a tuple from a sequence 
                      #     (which is a string)
print tuple([a])      # <-- you create a tuple from a sequence 
                      #     (which is a list containing a string)
print tuple(list(a))  # <-- you create a tuple from a sequence 
                      #     (which you create from a string)
print (a,)            # <-- you create a tuple containing the string
print (a)             # <-- it's just the string wrapped in parentheses

The output is as expected:

('Q', 'u', 'a', 't', 't', 'r', 'o', ' ', 'T', 'T')
('Quattro TT',)
('Q', 'u', 'a', 't', 't', 'r', 'o', ' ', 'T', 'T')
('Quattro TT',)
Quattro TT

To add some notes on the print statement. When you try to create a single-element tuple as part of a print statement in Python 2.7 (as in print (a,)) you need to use the parenthesized form, because the trailing comma of print a, would else be considered part of the print statement and thus cause the newline to be suppressed from the output and not a tuple being created:

A '\n' character is written at the end, unless the print statement ends with a comma.

In Python 3.x most of the above usages in the examples would actually raise SyntaxError, because in Python 3 print turns into a function (you need to add an extra pair of parentheses). But especially this may cause confusion:

print (a,)            # <-- this prints a tuple containing `a` in Python 2.x
                      #     but only `a` in Python 3.x

All of the prior solutions get at the point a little, however, they just don't copy everything over. I created a PHP function (albeit somewhat lengthy) that copies everything including tables, foreign keys, data, views, procedures, functions, triggers, and events. Here is the code:

/* This function takes the database connection, an existing database, and the new database and duplicates everything in the new database. */
function copyDatabase($c, $oldDB, $newDB) {

    // creates the schema if it does not exist
    $schema = "CREATE SCHEMA IF NOT EXISTS {$newDB};";
    mysqli_query($c, $schema);

    // selects the new schema
    mysqli_select_db($c, $newDB);

    // gets all tables in the old schema
    $tables = "SELECT table_name
               FROM information_schema.tables
               WHERE table_schema = '{$oldDB}'
               AND table_type = 'BASE TABLE'";
    $results = mysqli_query($c, $tables);

    // checks if any tables were returned and recreates them in the new schema, adds the foreign keys, and inserts the associated data
    if (mysqli_num_rows($results) > 0) {

        // recreates all tables first
        while ($row = mysqli_fetch_array($results)) {
            $table = "CREATE TABLE {$newDB}.{$row[0]} LIKE {$oldDB}.{$row[0]}";
            mysqli_query($c, $table);
        }

        // resets the results to loop through again
        mysqli_data_seek($results, 0);

        // loops through each table to add foreign key and insert data
        while ($row = mysqli_fetch_array($results)) {

            // inserts the data into each table
            $data = "INSERT IGNORE INTO {$newDB}.{$row[0]} SELECT * FROM {$oldDB}.{$row[0]}";
            mysqli_query($c, $data);

            // gets all foreign keys for a particular table in the old schema
            $fks = "SELECT constraint_name, column_name, table_name, referenced_table_name, referenced_column_name
                    FROM information_schema.key_column_usage
                    WHERE referenced_table_name IS NOT NULL
                    AND table_schema = '{$oldDB}'
                    AND table_name = '{$row[0]}'";
            $fkResults = mysqli_query($c, $fks);

            // checks if any foreign keys were returned and recreates them in the new schema
            // Note: ON UPDATE and ON DELETE are not pulled from the original so you would have to change this to your liking
            if (mysqli_num_rows($fkResults) > 0) {
                while ($fkRow = mysqli_fetch_array($fkResults)) {
                    $fkQuery = "ALTER TABLE {$newDB}.{$row[0]}                              
                                ADD CONSTRAINT {$fkRow[0]}
                                FOREIGN KEY ({$fkRow[1]}) REFERENCES {$newDB}.{$fkRow[3]}({$fkRow[1]})
                                ON UPDATE CASCADE
                                ON DELETE CASCADE;";
                    mysqli_query($c, $fkQuery);
                }
            }
        }   
    }

    // gets all views in the old schema
    $views = "SHOW FULL TABLES IN {$oldDB} WHERE table_type LIKE 'VIEW'";                
    $results = mysqli_query($c, $views);

    // checks if any views were returned and recreates them in the new schema
    if (mysqli_num_rows($results) > 0) {
        while ($row = mysqli_fetch_array($results)) {
            $view = "SHOW CREATE VIEW {$oldDB}.{$row[0]}";
            $viewResults = mysqli_query($c, $view);
            $viewRow = mysqli_fetch_array($viewResults);
            mysqli_query($c, preg_replace("/CREATE(.*?)VIEW/", "CREATE VIEW", str_replace($oldDB, $newDB, $viewRow[1])));
        }
    }

    // gets all triggers in the old schema
    $triggers = "SELECT trigger_name, action_timing, event_manipulation, event_object_table, created
                 FROM information_schema.triggers
                 WHERE trigger_schema = '{$oldDB}'";                 
    $results = mysqli_query($c, $triggers);

    // checks if any triggers were returned and recreates them in the new schema
    if (mysqli_num_rows($results) > 0) {
        while ($row = mysqli_fetch_array($results)) {
            $trigger = "SHOW CREATE TRIGGER {$oldDB}.{$row[0]}";
            $triggerResults = mysqli_query($c, $trigger);
            $triggerRow = mysqli_fetch_array($triggerResults);
            mysqli_query($c, str_replace($oldDB, $newDB, $triggerRow[2]));
        }
    }

    // gets all procedures in the old schema
    $procedures = "SHOW PROCEDURE STATUS WHERE db = '{$oldDB}'";
    $results = mysqli_query($c, $procedures);

    // checks if any procedures were returned and recreates them in the new schema
    if (mysqli_num_rows($results) > 0) {
        while ($row = mysqli_fetch_array($results)) {
            $procedure = "SHOW CREATE PROCEDURE {$oldDB}.{$row[1]}";
            $procedureResults = mysqli_query($c, $procedure);
            $procedureRow = mysqli_fetch_array($procedureResults);
            mysqli_query($c, str_replace($oldDB, $newDB, $procedureRow[2]));
        }
    }

    // gets all functions in the old schema
    $functions = "SHOW FUNCTION STATUS WHERE db = '{$oldDB}'";
    $results = mysqli_query($c, $functions);

    // checks if any functions were returned and recreates them in the new schema
    if (mysqli_num_rows($results) > 0) {
        while ($row = mysqli_fetch_array($results)) {
            $function = "SHOW CREATE FUNCTION {$oldDB}.{$row[1]}";
            $functionResults = mysqli_query($c, $function);
            $functionRow = mysqli_fetch_array($functionResults);
            mysqli_query($c, str_replace($oldDB, $newDB, $functionRow[2]));
        }
    }

    // selects the old schema (a must for copying events)
    mysqli_select_db($c, $oldDB);

    // gets all events in the old schema
    $query = "SHOW EVENTS
              WHERE db = '{$oldDB}';";
    $results = mysqli_query($c, $query);

    // selects the new schema again
    mysqli_select_db($c, $newDB);

    // checks if any events were returned and recreates them in the new schema
    if (mysqli_num_rows($results) > 0) {
        while ($row = mysqli_fetch_array($results)) {
            $event = "SHOW CREATE EVENT {$oldDB}.{$row[1]}";
            $eventResults = mysqli_query($c, $event);
            $eventRow = mysqli_fetch_array($eventResults);
            mysqli_query($c, str_replace($oldDB, $newDB, $eventRow[3]));
        }
    }
}

Note about tag of tag (tagging a tag), which is at the origin of your issue, as Charles Bailey correctly pointed out in the comment:

Make sure you study this thread, as overriding a signed tag is not as easy:

• if you already pushed a tag, the git tag man page seriously advised against a simple git tag -f B to replace a tag name "A"

• don't try to recreate a signed tag with git tag -f (see the thread extract below)

  (it is about a corner case, but quite instructive about tags in general, and it comes from another SO contributor Jakub Narebski):

Please note that the name of tag (heavyweight tag, i.e. tag object) is stored in two places:

• in the tag object itself as a contents of 'tag' header (you can see it in output of "git show <tag>" and also in output of "git cat-file -p <tag>", where <tag> is heavyweight tag, e.g. v1.6.3 in git.git repository),
• and also is default name of tag reference (reference in "refs/tags/*" namespace) pointing to a tag object.
  Note that the tag reference (appropriate reference in the "refs/tags/*" namespace) is purely local matter; what one repository has in 'refs/tags/v0.1.3', other can have in 'refs/tags/sub/v0.1.3' for example.

So when you create signed tag 'A', you have the following situation (assuming that it points at some commit)

  35805ce   <--- 5b7b4ead  <=== refs/tags/A
  (commit)       tag A
                 (tag)

Please also note that "git tag -f A A" (notice the absence of options forcing it to be an annotated tag) is a noop - it doesn't change the situation.

If you do "git tag -f -s A A": note that you force owerwriting a tag (so git assumes that you know what you are doing), and that one of -s / -a / -m options is used to force annotated tag (creation of tag object), you will get the following situation

  35805ce   <--- 5b7b4ea  <--- ada8ddc  <=== refs/tags/A
  (commit)       tag A         tag A
                 (tag)         (tag)

Note also that "git show A" would show the whole chain down to the non-tag object...

Just store the index generated in a variable, and then access the array using this varaible:

int idx = new Random().nextInt(fruits.length);
String random = (fruits[idx]);

P.S. I usually don't like generating new Random object per randoization - I prefer using a single Random in the program - and re-use it. It allows me to easily reproduce a problematic sequence if I later find any bug in the program.

According to this approach, I will have some variable Random r somewhere, and I will just use:

int idx = r.nextInt(fruits.length)

However, your approach is OK as well, but you might have hard time reproducing a specific sequence if you need to later on.

I faced this exact same issue with Laravel 8.x on Ubuntu 20. I run: sudo apt install php7.4-xml and composer update within the project directory. This fixed the issue.

If anybody falls here from google, this is how to check if string contains at least one digit in C#:

With Regex

if (Regex.IsMatch(myString, @"\d"))
{
  // do something
}

Info: necessary to add using System.Text.RegularExpressions

With linq:

if (myString.Any(c => Char.IsDigit(c)))
{
  // do something
}

Info: necessary to add using System.Linq

It could be that you are using gradle in offline mode. To uncheck it go to File > Settings > Gradle, uncheck the Offline Work checkbox, and click Apply Make sure you have internet connection and sync the project again.

First off, your trigger as you already see is going to update every record in the table. There is no filtering done to accomplish jus the rows changed.

Secondly, you're assuming that only one row changes in the batch which is incorrect as multiple rows could change.

The way to do this properly is to use the virtual inserted and deleted tables: http://msdn.microsoft.com/en-us/library/ms191300.aspx

You can use date filter to convert in date and display in specific format.

In .ts file (typescript):

let dateString = '1968-11-16T00:00:00' 
let newDate = new Date(dateString);

In HTML:

{{dateString |  date:'MM/dd/yyyy'}}

Below are some formats which you can implement :

Backend:

public todayDate = new Date();

HTML :

<select>
<option value=""></option>
<option value="MM/dd/yyyy">[{{todayDate | date:'MM/dd/yyyy'}}]</option>
<option value="EEEE, MMMM d, yyyy">[{{todayDate | date:'EEEE, MMMM d, yyyy'}}]</option>
<option value="EEEE, MMMM d, yyyy h:mm a">[{{todayDate | date:'EEEE, MMMM d, yyyy h:mm a'}}]</option>
<option value="EEEE, MMMM d, yyyy h:mm:ss a">[{{todayDate | date:'EEEE, MMMM d, yyyy h:mm:ss a'}}]</option>
<option value="MM/dd/yyyy h:mm a">[{{todayDate | date:'MM/dd/yyyy h:mm a'}}]</option>
<option value="MM/dd/yyyy h:mm:ss a">[{{todayDate | date:'MM/dd/yyyy h:mm:ss a'}}]</option>
<option value="MMMM d">[{{todayDate | date:'MMMM d'}}]</option>   
<option value="yyyy-MM-ddTHH:mm:ss">[{{todayDate | date:'yyyy-MM-ddTHH:mm:ss'}}]</option>
<option value="h:mm a">[{{todayDate | date:'h:mm a'}}]</option>
<option value="h:mm:ss a">[{{todayDate | date:'h:mm:ss a'}}]</option>      
<option value="EEEE, MMMM d, yyyy hh:mm:ss a">[{{todayDate | date:'EEEE, MMMM d, yyyy hh:mm:ss a'}}]</option>
<option value="MMMM yyyy">[{{todayDate | date:'MMMM yyyy'}}]</option> 
</select>

The reason why your full-width-div doesn't stretch 100% to your screen it's because of its parent "container" which occupies only about 80% of the screen.

If you want to make it stretch 100% to the screen either you make the "full-width-div" position fixed or use the "container-fluid" class instead of "container".

see Bootstrap 3 docs: http://getbootstrap.com/css/#grid

Using a <br/> for making a new row it's a bad solution from the start. Make your container #div1 to have a width equal to 3 child-divs. <br/> in my opinion should not be used in other places than paragraphs.

Is above javascript code the one you're using in your web application ? If so - i would like to point few errors in it: firstly - it has an additional '{' sign in definition of 'success' callback function secondly - it has no ')' sign after definition of ajax callback. Valid code should look like:

$.ajax({
        type:'POST',
        data: 'args',
        url: '@Url.Action("PostBack")',
        success: function (data, textStatus, jqXHR) {
                alert(data.message);
            }
    });

try using above code - it gave me 'Yay' alert on all 3 IE versions ( 7,8,9 ).

Since my Edit on the above post by thevangelist wasn't approved, posting additional information.

If you want to pick value from package.json like a defined version number and access it through DefinePlugin inside Javascript.

{"version": "0.0.1"}

Then, Import package.json inside respective webpack.config, access the attribute using the import variable, then use the attribute in the DefinePlugin.

const PACKAGE = require('../package.json');
const _version = PACKAGE.version;//Picks the version number from package.json

For example certain configuration on webpack.config is using METADATA for DefinePlugin:

const METADATA = webpackMerge(commonConfig({env: ENV}).metadata, {
  host: HOST,
  port: PORT,
  ENV: ENV,
  HMR: HMR,
  RELEASE_VERSION:_version//Version attribute retrieved from package.json
});

new DefinePlugin({
        'ENV': JSON.stringify(METADATA.ENV),
        'HMR': METADATA.HMR,
        'process.env': {
          'ENV': JSON.stringify(METADATA.ENV),
          'NODE_ENV': JSON.stringify(METADATA.ENV),
          'HMR': METADATA.HMR,
          'VERSION': JSON.stringify(METADATA.RELEASE_VERSION)//Setting it for the Scripts usage.
        }
      }),

Access this inside any typescript file:

this.versionNumber = process.env.VERSION;

The smartest way would be like this:

// webpack.config.js
plugins: [
    new webpack.DefinePlugin({
      VERSION: JSON.stringify(require("./package.json").version)
    })
  ]

Thanks to Ross Allen

If the above methods don't work (as they didn't work on my Ubuntu 13.04 installation) try:

There are a number of alternative ways:

1) Run select-editor

select-editor

2) Manually edit the file: ~/.selected_editor specifying your preferred editor. With this option you can specify editor parameters.

# Generated by /usr/bin/select-editor
SELECTED_EDITOR="/usr/bin/emacs -nw"

3) You can specify on the fly on the commandline with:

env VISUAL="emacs -nw" crontab -e

I solved my problem simply using ng-init for default selection instead of ng-checked

<div ng-init="person.billing=FALSE"></div>
<input id="billing-no" type="radio" name="billing" ng-model="person.billing" ng-value="FALSE" />
<input id="billing-yes" type="radio" name="billing" ng-model="person.billing" ng-value="TRUE" />

Similar to a few posts prior - I went to SDK Manager and uninstalled v20 and version L. Then I installed version 19 and this problem was resolved and I could debug using my android device, no errors.

I think, from my own experience on problems with more advanced data structures, that the most important thing you can do here, is to get a good knowledge on the general concept of tress as data structures. If you understand the basic mechanism behind the concept it will be quite easy to implement the solution that fits your problem. There are a lot of good sources out there describing the concept. What "saved" me years ago on this particular problem was section 2.3 in "The Art of Computer Programming".

if you used

git rm filename

to delete a file then

git checkout path/to/filename

doesn't work, so in that case

git checkout HEAD^ path/to/filename

should work

Try to update your compiler, I'm using GCC 4.7 on Windows 7 Starter x86 with MinGW and it compiles fine with the same options both in C99 and C11.

For chat applications or any other application that is in constant conversation with the server, WebSockets are the best option. However, you can only use WebSockets with a server that supports them, so that may limit your ability to use them if you cannot install the required libraries. In which case, you would need to use Long Polling to obtain similar functionality.

&& is new in C++11. int&& a means "a" is an r-value reference. && is normally only used to declare a parameter of a function. And it only takes a r-value expression. If you don't know what an r-value is, the simple explanation is that it doesn't have a memory address. E.g. the number 6, and character 'v' are both r-values. int a, a is an l-value, however (a+2) is an r-value. For example:

void foo(int&& a)
{
    //Some magical code...
}

int main()
{
    int b;
    foo(b); //Error. An rValue reference cannot be pointed to a lValue.
    foo(5); //Compiles with no error.
    foo(b+3); //Compiles with no error.

    int&& c = b; //Error. An rValue reference cannot be pointed to a lValue.
    int&& d = 5; //Compiles with no error.
}

Hope that is informative.

The gist

In Node.js, __dirname is always the directory in which the currently executing script resides (see this). So if you typed __dirname into /d1/d2/myscript.js, the value would be /d1/d2.

By contrast, . gives you the directory from which you ran the node command in your terminal window (i.e. your working directory) when you use libraries like path and fs. Technically, it starts out as your working directory but can be changed using process.chdir().

The exception is when you use . with require(). The path inside require is always relative to the file containing the call to require.

For example...

Let's say your directory structure is

/dir1
  /dir2
    pathtest.js

and pathtest.js contains

var path = require("path");
console.log(". = %s", path.resolve("."));
console.log("__dirname = %s", path.resolve(__dirname));

and you do

cd /dir1/dir2
node pathtest.js

you get

. = /dir1/dir2
__dirname = /dir1/dir2

Your working directory is /dir1/dir2 so that's what . resolves to. Since pathtest.js is located in /dir1/dir2 that's what __dirname resolves to as well.

However, if you run the script from /dir1

cd /dir1
node dir2/pathtest.js

you get

. = /dir1
__dirname = /dir1/dir2

In that case, your working directory was /dir1 so that's what . resolved to, but __dirname still resolves to /dir1/dir2.

Using . inside require...

If inside dir2/pathtest.js you have a require call into include a file inside dir1 you would always do

require('../thefile')

because the path inside require is always relative to the file in which you are calling it. It has nothing to do with your working directory.

360 degrees is 2*PI radians

You can find the conversion formulas at: http://en.wikipedia.org/wiki/Radian#Conversion_between_radians_and_degrees.

based on this link , the correct answer (which i've tested myself) is:

put this code in the constructor or the onCreate() method of the dialog:

getWindow().setLayout(WindowManager.LayoutParams.MATCH_PARENT,
                WindowManager.LayoutParams.MATCH_PARENT);

in addition , set the style of the dialog to :

<style name="full_screen_dialog">
    <item name="android:windowFrame">@null</item>
    <item name="android:windowIsFloating">true</item>
    <item name="android:windowContentOverlay">@null</item>
    <item name="android:windowAnimationStyle">@android:style/Animation.Dialog</item>
    <item name="android:windowSoftInputMode">stateUnspecified|adjustPan</item>
</style>

this could be achieved via the constructor , for example :

public FullScreenDialog(Context context)
{
  super(context, R.style.full_screen_dialog);
  ...

EDIT: an alternative to all of the above would be to set the style to android.R.style.ThemeOverlay and that's it.

To get the value of a pointer, just de-reference the pointer.

int *ptr;
int value;
*ptr = 9;

value = *ptr;

value is now 9.

I suggest you read more about pointers, this is their base functionality.

You are passing a reference to the list, but your aren't passing the list variable by reference - so when you call ChangeList the value of the variable (i.e. the reference - think "pointer") is copied - and changes to the value of the parameter inside ChangeList aren't seen by TestMethod.

try:

private void ChangeList(ref List<int> myList) {...}
...
ChangeList(ref myList);

This then passes a reference to the local-variable myRef (as declared in TestMethod); now, if you reassign the parameter inside ChangeList you are also reassigning the variable inside TestMethod.

Be aware that the function File.GetLastWriteTime does not always work as expected, the values are sometimes not instantaneously updated by the OS. You may get an old Timestamp, even if the file has been modified right before.

The behaviour may vary between OS versions. For example, this unit test worked well every time on my developer machine, but it always fails on our build server.

  [TestMethod]
  public void TestLastModifiedTimeStamps()
  {
     var tempFile = Path.GetTempFileName();
     var lastModified = File.GetLastWriteTime(tempFile);
     using (new FileStream(tempFile, FileMode.Create, FileAccess.Write, FileShare.None))
     {

     }
     Assert.AreNotEqual(lastModified, File.GetLastWriteTime(tempFile));
  }

See File.GetLastWriteTime seems to be returning 'out of date' value

Your options:

a) live with the occasional omissions.

b) Build up an active component realising the observer pattern (eg. a tcp server client structure), communicating the changes directly instead of writing / reading files. Fast and flexible, but another dependency and a possible point of failure (and some work, of course).

c) Ensure the signalling process by replacing the content of a dedicated signal file that other processes regularly read. It´s not that smart as it´s a polling procedure and has a greater overhead than calling File.GetLastWriteTime, but if not checking the content from too many places too often, it will do the work.

/// <summary>
/// type to set signals or check for them using a central file 
/// </summary>
public class FileSignal
{
    /// <summary>
    /// path to the central file for signal control
    /// </summary>
    public string FilePath { get; private set; }

    /// <summary>
    /// numbers of retries when not able to retrieve (exclusive) file access
    /// </summary>
    public int MaxCollisions { get; private set; }

    /// <summary>
    /// timespan to wait until next try
    /// </summary>
    public TimeSpan SleepOnCollisionInterval { get; private set; }

    /// <summary>
    /// Timestamp of the last signal
    /// </summary>
    public DateTime LastSignal { get; private set; }

    /// <summary>
    /// constructor
    /// </summary>
    /// <param name="filePath">path to the central file for signal control</param>
    /// <param name="maxCollisions">numbers of retries when not able to retrieve (exclusive) file access</param>
    /// <param name="sleepOnCollisionInterval">timespan to wait until next try </param>
    public FileSignal(string filePath, int maxCollisions, TimeSpan sleepOnCollisionInterval)
    {
        FilePath = filePath;
        MaxCollisions = maxCollisions;
        SleepOnCollisionInterval = sleepOnCollisionInterval;
        LastSignal = GetSignalTimeStamp();
    }

    /// <summary>
    /// constructor using a default value of 50 ms for sleepOnCollisionInterval
    /// </summary>
    /// <param name="filePath">path to the central file for signal control</param>
    /// <param name="maxCollisions">numbers of retries when not able to retrieve (exclusive) file access</param>        
    public FileSignal(string filePath, int maxCollisions): this (filePath, maxCollisions, TimeSpan.FromMilliseconds(50))
    {
    }

    /// <summary>
    /// constructor using a default value of 50 ms for sleepOnCollisionInterval and a default value of 10 for maxCollisions
    /// </summary>
    /// <param name="filePath">path to the central file for signal control</param>        
    public FileSignal(string filePath) : this(filePath, 10)
    {
    }

    private Stream GetFileStream(FileAccess fileAccess)
    {
        var i = 0;
        while (true)
        {
            try
            {
                return new FileStream(FilePath, FileMode.Create, fileAccess, FileShare.None);
            }
            catch (Exception e)
            {
                i++;
                if (i >= MaxCollisions)
                {
                    throw e;
                }
                Thread.Sleep(SleepOnCollisionInterval);
            };
        };
    }

    private DateTime GetSignalTimeStamp()
    {
        if (!File.Exists(FilePath))
        {
            return DateTime.MinValue;
        }
        using (var stream = new FileStream(FilePath, FileMode.Open, FileAccess.Read, FileShare.None))
        {
            if(stream.Length == 0)
            {
                return DateTime.MinValue;
            }
            using (var reader = new BinaryReader(stream))
            {
                return DateTime.FromBinary(reader.ReadInt64());
            };                
        }
    }

    /// <summary>
    /// overwrites the existing central file and writes the current time into it.
    /// </summary>
    public void Signal()
    {
        LastSignal = DateTime.Now;
        using (var stream = new FileStream(FilePath, FileMode.Create, FileAccess.Write, FileShare.None))
        {
            using (var writer = new BinaryWriter(stream))
            {
                writer.Write(LastSignal.ToBinary());
            }
        }
    }

    /// <summary>
    /// returns true if the file signal has changed, otherwise false.
    /// </summary>        
    public bool CheckIfSignalled()
    {
        var signal = GetSignalTimeStamp();
        var signalTimestampChanged = LastSignal != signal;
        LastSignal = signal;
        return signalTimestampChanged;
    }
}

Some tests for it:

    [TestMethod]
    public void TestSignal()
    {
        var fileSignal = new FileSignal(Path.GetTempFileName());
        var fileSignal2 = new FileSignal(fileSignal.FilePath);
        Assert.IsFalse(fileSignal.CheckIfSignalled());
        Assert.IsFalse(fileSignal2.CheckIfSignalled());
        Assert.AreEqual(fileSignal.LastSignal, fileSignal2.LastSignal);
        fileSignal.Signal();
        Assert.IsFalse(fileSignal.CheckIfSignalled());
        Assert.AreNotEqual(fileSignal.LastSignal, fileSignal2.LastSignal);
        Assert.IsTrue(fileSignal2.CheckIfSignalled());
        Assert.AreEqual(fileSignal.LastSignal, fileSignal2.LastSignal);
        Assert.IsFalse(fileSignal2.CheckIfSignalled());
    }

Here are the Blend behaviors implementing the answer solution for your convenience:

One for attaching to a single TextBox:

public class SelectAllTextOnFocusBehavior : Behavior<TextBox>
{
    protected override void OnAttached()
    {
        base.OnAttached();
        AssociatedObject.GotKeyboardFocus += AssociatedObjectGotKeyboardFocus;
        AssociatedObject.GotMouseCapture += AssociatedObjectGotMouseCapture;
        AssociatedObject.PreviewMouseLeftButtonDown += AssociatedObjectPreviewMouseLeftButtonDown;
    }

    protected override void OnDetaching()
    {
        base.OnDetaching();
        AssociatedObject.GotKeyboardFocus -= AssociatedObjectGotKeyboardFocus;
        AssociatedObject.GotMouseCapture -= AssociatedObjectGotMouseCapture;
        AssociatedObject.PreviewMouseLeftButtonDown -= AssociatedObjectPreviewMouseLeftButtonDown;
    }

    private void AssociatedObjectGotKeyboardFocus(object sender,
        System.Windows.Input.KeyboardFocusChangedEventArgs e)
    {
        AssociatedObject.SelectAll();
    }

    private void AssociatedObjectGotMouseCapture(object sender,
        System.Windows.Input.MouseEventArgs e)
    {
        AssociatedObject.SelectAll();   
    }

    private void AssociatedObjectPreviewMouseLeftButtonDown(object sender, MouseButtonEventArgs e)
    {
        if(!AssociatedObject.IsKeyboardFocusWithin)
        {
            AssociatedObject.Focus();
            e.Handled = true;
        }
    }
}

And one for attaching to the root of a container containing multiple TextBox'es:

public class SelectAllTextOnFocusMultiBehavior : Behavior<UIElement>
{
    protected override void OnAttached()
    {
        base.OnAttached();
        AssociatedObject.GotKeyboardFocus += HandleKeyboardFocus;
        AssociatedObject.GotMouseCapture += HandleMouseCapture;
    }

    protected override void OnDetaching()
    {
        base.OnDetaching();
        AssociatedObject.GotKeyboardFocus -= HandleKeyboardFocus;
        AssociatedObject.GotMouseCapture -= HandleMouseCapture;
    }

    private static void HandleKeyboardFocus(object sender,
        System.Windows.Input.KeyboardFocusChangedEventArgs e)
    {
        var txt = e.NewFocus as TextBox;
        if (txt != null)
            txt.SelectAll();
    }

    private static void HandleMouseCapture(object sender,
        System.Windows.Input.MouseEventArgs e)
    {
        var txt = e.OriginalSource as TextBox;
        if (txt != null)
            txt.SelectAll();
    }
}

This should do what you want, but without more context I can't tell for sure.

Writing $text to a file:

$text = "Anything";
$var_str = var_export($text, true);
$var = "<?php\n\n\$text = $var_str;\n\n?>";
file_put_contents('filename.php', $var);

Retrieving it again:

include 'filename.php';
echo $text;

It looks like you've just finished step 3. Instead of running a function, you just print out a statement. A function is defined in the following way:

def addstudent():
    print("Student Added.")

then called by writing addstudent().

I would recommend using a while loop for your input. You can define the menu option outside the loop, put the print statement inside the loop, and do while(#valid option is not picked), then put the if statements after the while. Or you can do a while loop and continue the loop if a valid option is not selected.

Additionally, a dictionary is defined in the following way:

my_dict = {key:definition,...}

This is one way to accomplish this using PowerShell:

<#
.SYNOPSIS
Restores (applies) a previously saved stash based on full or partial stash name.

.DESCRIPTION
Restores (applies) a previously saved stash based on full or partial stash name and then optionally drops the stash. Can be used regardless of whether "git stash save" was done or just "git stash". If no stash matches a message is given. If multiple stashes match a message is given along with matching stash info.

.PARAMETER message
A full or partial stash message name (see right side output of "git stash list"). Can also be "@stash{N}" where N is 0 based stash index.

.PARAMETER drop
If -drop is specified, the matching stash is dropped after being applied.

.EXAMPLE
Restore-Stash "Readme change"
Apply-Stash MyStashName
Apply-Stash MyStashName -drop
Apply-Stash "stash@{0}"
#>
function Restore-Stash  {
    [CmdletBinding()]
    [Alias("Apply-Stash")]
    PARAM (
        [Parameter(Mandatory=$true)] $message,         
        [switch]$drop
    )

    $stashId = $null

    if ($message -match "stash@{") {
        $stashId = $message
    }

    if (!$stashId) {
        $matches = git stash list | Where-Object { $_ -match $message }

        if (!$matches) {
            Write-Warning "No stashes found with message matching '$message' - check git stash list"
            return
        }

        if ($matches.Count -gt 1) {
            Write-Warning "Found $($matches.Count) matches for '$message'. Refine message or pass 'stash{@N}' to this function or git stash apply"
            return $matches
        }

        $parts = $matches -split ':'
        $stashId = $parts[0]
    }

    git stash apply ''$stashId''

    if ($drop) {
        git stash drop ''$stashId''
    }
}

More details here

Before going to answer read this Documentation once. Then you clearly understand the answer.

Try this It may work for you.

Object.keys(data.shareInfo[i]).length

You're looking for case:

case when action = 2 and state = 0 then 1 else 0 end as state

MySQL has an if syntax (if(action=2 and state=0, 1, 0)), but case is more universal.

Note that the as state there is just aliasing the column. I'm assuming this is in the column list of your SQL query.

You can use following code snippet for get the HttpClient instance without ssl certification checking.

private HttpClient getSSLHttpClient() throws KeyStoreException, NoSuchAlgorithmException, KeyManagementException {

        LogLoader.serverLog.trace("In getSSLHttpClient()");

        SSLContext context = SSLContext.getInstance("SSL");

        TrustManager tm = new X509TrustManager() {
            public void checkClientTrusted(X509Certificate[] chain, String authType) throws CertificateException {
            }

            public void checkServerTrusted(X509Certificate[] chain, String authType) throws CertificateException {
            }

            public X509Certificate[] getAcceptedIssuers() {
                return null;
            }
        };

        context.init(null, new TrustManager[] { tm }, null);

        HttpClientBuilder builder = HttpClientBuilder.create();
        SSLConnectionSocketFactory sslConnectionFactory = new SSLConnectionSocketFactory(context);
        builder.setSSLSocketFactory(sslConnectionFactory);

        PlainConnectionSocketFactory plainConnectionSocketFactory = new PlainConnectionSocketFactory();
        Registry<ConnectionSocketFactory> registry = RegistryBuilder.<ConnectionSocketFactory>create()
                .register("https", sslConnectionFactory).register("http", plainConnectionSocketFactory).build();

        PoolingHttpClientConnectionManager ccm = new PoolingHttpClientConnectionManager(registry);
        ccm.setMaxTotal(BaseConstant.CONNECTION_POOL_SIZE);
        ccm.setDefaultMaxPerRoute(BaseConstant.CONNECTION_POOL_SIZE);
        builder.setConnectionManager((HttpClientConnectionManager) ccm);

        builder.disableRedirectHandling();

        LogLoader.serverLog.trace("Out getSSLHttpClient()");

        return builder.build();
    }

It's really a matter of taste. Factory classes can be abstracted/interfaced away as necessary, whereas factory methods are lighter weight (and also tend to be testable, since they don't have a defined type, but they will require a well-known registration point, akin to a service locator but for locating factory methods).

The function combn is in the standard utils package (i.e. already installed)

choose is also already available in the Special {base}

you can add the code at the beginning of .ts files.

/// <reference path="../typings/index.d.ts" />

$newstr = preg_replace('/[^a-zA-Z0-9\']/', '_', "There wouldn't be any");
$newstr = str_replace("'", '', $newstr);

I put them on two separate lines to make the code a little more clear.

Note: If you're looking for Unicode support, see Filip's answer below. It will match all characters that register as letters in addition to A-z.

I saw that the question is already answered, but if you'd like to learn more details, there are a total of 3 cases of communication between components:

• Case 1: Parent to Child communication
• Case 2: Child to Parent communication
• Case 3: Not-related components (any component to any component) communication

The optimizer often cannot use the relational algebra to transform the problem when a cursor method is used. Often a cursor is a great way to solve a problem, but SQL is a declarative language, and there is a lot of information in the database, from constraints, to statistics and indexes which mean that the optimizer has a lot of options to solve the problem, whereas a cursor pretty much explicitly directs the solution.

np.convolve() takes one dimension array. You need to check the input and convert it into 1D.

You can use the np.ravel(), to convert the array to one dimension.

Suspend the process with CTRL+Z then use the command bg to resume it in background. For example:

sleep 60
^Z  #Suspend character shown after hitting CTRL+Z
[1]+  Stopped  sleep 60  #Message showing stopped process info
bg  #Resume current job (last job stopped)

More about job control and bg usage in bash manual page:

JOB CONTROL
Typing the suspend character (typically ^Z, Control-Z) while a process is running causes that process to be stopped and returns control to bash. [...] The user may then manipulate the state of this job, using the bg command to continue it in the background, [...]. A ^Z takes effect immediately, and has the additional side effect of causing pending output and typeahead to be discarded.

bg [jobspec ...]
Resume each suspended job jobspec in the background, as if it had been started with &. If jobspec is not present, the shell's notion of the current job is used.

EDIT

To start a process where you can even kill the terminal and it still carries on running

nohup [command] [-args] > [filename] 2>&1 &

e.g.

nohup /home/edheal/myprog -arg1 -arg2 > /home/edheal/output.txt 2>&1 &

To just ignore the output (not very wise) change the filename to /dev/null

To get the error message set to a different file change the &1 to a filename.

In addition: You can use the jobs command to see an indexed list of those backgrounded processes. And you can kill a backgrounded process by running kill %1 or kill %2 with the number being the index of the process.

Automation / Git automation with OAuth tokens

$ git clone https://github.com/username/repo.git
  Username: your_token
  Password:

It also works in the git push command.

Reference: https://help.github.com/articles/git-automation-with-oauth-tokens/

Here's another solution: Use the Database Publishing Wizard to export your schema, security and data to sql scripts. You can then take your current DB offline and re-create it with the scripts.

Sounds kind of foolish, but there are a couple advantages. First, there's no chance of losing data. Your original db (as long as you don't delete your DB when dropping it!) is safe, the new DB will be roughly as small as it can be, and you'll have two different snapshots of your current database - one ready to roll, one minified - you can choose from to back up.

Try this:

function removeClassDelayed(jqObj, c, to) {    
    setTimeout(function() { jqObj.removeClass(c); }, to);
}
removeClassDelayed($("#div"), "error", 1000);

After tirelessly trying every solution on this page, my work around was to use and SSH key instead!

1. Open Git Bash
2. $ ssh-keygen.exe -t rsa -C
3. Open your Git provider (Github, Bitbucket, etc.)
4. Add copy the id_rsa.pub file contents into Git provider's input page (check your profile)

Note that besides all other comments there is a small difference, which should be mentioned here for completeness!

With the empty catch clause you can catch non-CLSCompliant Exceptions when the assembly is marked with "RuntimeCompatibility(WrapNonExceptionThrows = false)" (which is true by default since CLR2). [1][2][3]

[1] http://msdn.microsoft.com/en-us/library/bb264489.aspx

[2] http://blogs.msdn.com/b/pedram/archive/2007/01/07/non-cls-exceptions.aspx

[3] Will CLR handle both CLS-Complaint and non-CLS complaint exceptions?

You can either give class name to all label so that all can have same width :

 .class-name {  width:200px;}

Example

.labelname{  width:200px;}

or you can simple give rest of label

label {  width:200px;  display: inline-block;}

Depends on implementation but I would use

(?i)G[a-b].

VARIATIONS:

(?i) case-insensitive mode ON    
(?-i) case-insensitive mode OFF

Modern regex flavors allow you to apply modifiers to only part of the regular expression. If you insert the modifier (?im) in the middle of the regex then the modifier only applies to the part of the regex to the right of the modifier. With these flavors, you can turn off modes by preceding them with a minus sign (?-i).

Description is from the page: https://www.regular-expressions.info/modifiers.html

The Do/While solution is more elegant, but if you do use just the While solution posted above, without the moveToPosition(-1) you will miss the first element (at least on the Contact query).

I suggest:

if (cursor.getCount() > 0) {
    cursor.moveToPosition(-1);
    while (cursor.moveToNext()) {
          <do stuff>
    }
}

I was using eclipse and after trying all the other answers it didn't work for me. In the end, what worked for me was moving the ojdb7.jar to top in the Build Path. This occurs when multiple jars have conflicting same classes.

1. Select project in Project Explorer
2. Right click on Project -> Build Path -> Configure Build Path
3. Go to Order and Export tab and select ojdbc.jar
4. Click button TOP to move it to top

textview.setTypeface(Typeface.DEFAULT_BOLD);

setTypeface is the Attribute textStyle.

As Shankar V added, to preserve the previously set typeface attributes you can use:

textview.setTypeface(textview.getTypeface(), Typeface.BOLD);

The Original poster didn't mean to write:

  char* str = "blablabla";

but

  char str[128] = "blablabla";

Now, adding a single character would seem more efficient than adding a whole string with strcat. Going the strcat way, you could:

  char tmpstr[2];
  tmpstr[0] = c;
  tmpstr[1] = 0;
  strcat (str, tmpstr);

but you can also easily write your own function (as several have done before me):

  void strcat_c (char *str, char c)
  {
    for (;*str;str++); // note the terminating semicolon here. 
    *str++ = c; 
    *str++ = 0;
  }

Choose one you need:

>>> s = "Rajasekar SP  def"
>>> s.split(' ')
['Rajasekar', 'SP', '', 'def']
>>> s.split()
['Rajasekar', 'SP', 'def']
>>> s.partition(' ')
('Rajasekar', ' ', 'SP  def')

str.split and str.partition

I'd start by using glob:

from PIL import Image
import glob
image_list = []
for filename in glob.glob('yourpath/*.gif'): #assuming gif
    im=Image.open(filename)
    image_list.append(im)

then do what you need to do with your list of images (image_list).

To interact with the box you need to update the state for the checkbox once you change it. And to have a default setting you can use defaultChecked.

An example:

<input type="checkbox" defaultChecked={this.state.chkbox} onChange={this.handleChangeChk} />

Bootstrap 4 provides standard methods for this, fully described here: https://getbootstrap.com/docs/4.3/getting-started/theming

Eg. you can override defaults simply by setting variables in the SASS file, where you import bootstrap. An example from the docs (which also answers the question):

// Your variable overrides
$body-bg: #000;
$body-color: #111;

// Bootstrap and its default variables
@import "../node_modules/bootstrap/scss/bootstrap";

Yes. The entire text of an HTTPS session is secured by SSL. That includes the query and the headers. In that respect, a POST and a GET would be exactly the same.

As to the security of your method, there's no real way to say without proper inspection.

It is simpler to use a file (req.xml in my case) with content you want to send -- like this:

curl -H "Content-Type: text/xml" -d @req.xml -X POST http://localhost/asdf

You should consider using type 'application/xml', too (differences explained here)

Alternatively, without needing making curl actually read the file, you can use cat to spit the file into the stdout and make curl to read from stdout like this:

cat req.xml | curl -H "Content-Type: text/xml" -d @- -X POST http://localhost/asdf

Both examples should produce identical service output.

keytool comes with the JDK installation (in the bin folder):

keytool -importcert -file "your.cer" -keystore your.jks -alias "<anything>"

This will create a new keystore and add just your certificate to it.

So, you can't convert a certificate to a keystore: you add a certificate to a keystore.

Here is a solution using boxplot.stats

# create a dummy data frame with outliers
df = data.frame(y = c(-100, rnorm(100), 100))

# create boxplot that includes outliers
p0 = ggplot(df, aes(y = y)) + geom_boxplot(aes(x = factor(1)))


# compute lower and upper whiskers
ylim1 = boxplot.stats(df$y)$stats[c(1, 5)]

# scale y limits based on ylim1
p1 = p0 + coord_cartesian(ylim = ylim1*1.05)

It's method syntax (which I find easier to read) but this might do it

Updated post comment

Use .FirstOrDefault() instead of .First()

With regard to the dates average, you may have to drop that ordering for the moment as I am unable to get to an IDE at the moment

var groupByReference = context.Measurements
                              .GroupBy(m => m.Reference)
                              .Select(g => new {Creation = g.FirstOrDefault().CreationTime, 
//                                              Avg = g.Average(m => m.CreationTime.Ticks),
                                                Items = g })
                              .OrderBy(x => x.Creation)
//                            .ThenBy(x => x.Avg)
                              .Take(numOfEntries)
                              .ToList();

This is an interesting discussion. I think that @flodel's example is excellent. However, I think it illustrates my point (and @koshke mentions this in a comment) that return makes sense when you use an imperative instead of a functional coding style.

Not to belabour the point, but I would have rewritten foo like this:

foo = function() ifelse(a,a,b)

A functional style avoids state changes, like storing the value of output. In this style, return is out of place; foo looks more like a mathematical function.

I agree with @flodel: using an intricate system of boolean variables in bar would be less clear, and pointless when you have return. What makes bar so amenable to return statements is that it is written in an imperative style. Indeed, the boolean variables represent the "state" changes avoided in a functional style.

It is really difficult to rewrite bar in functional style, because it is just pseudocode, but the idea is something like this:

e_func <- function() do_stuff
d_func <- function() ifelse(any(sapply(seq(d),e_func)),2,3)
b_func <- function() {
  do_stuff
  ifelse(c,1,sapply(seq(b),d_func))
}

bar <- function () {
   do_stuff
   sapply(seq(a),b_func) # Not exactly correct, but illustrates the idea.
}

The while loop would be the most difficult to rewrite, because it is controlled by state changes to a.

The speed loss caused by a call to return is negligible, but the efficiency gained by avoiding return and rewriting in a functional style is often enormous. Telling new users to stop using return probably won't help, but guiding them to a functional style will payoff.

@Paul return is necessary in imperative style because you often want to exit the function at different points in a loop. A functional style doesn't use loops, and therefore doesn't need return. In a purely functional style, the final call is almost always the desired return value.

In Python, functions require a return statement. However, if you programmed your function in a functional style, you will likely have only one return statement: at the end of your function.

Using an example from another StackOverflow post, let us say we wanted a function that returned TRUE if all the values in a given x had an odd length. We could use two styles:

# Procedural / Imperative
allOdd = function(x) {
  for (i in x) if (length(i) %% 2 == 0) return (FALSE)
  return (TRUE)
}

# Functional
allOdd = function(x) 
  all(length(x) %% 2 == 1)

In a functional style, the value to be returned naturally falls at the ends of the function. Again, it looks more like a mathematical function.

@GSee The warnings outlined in ?ifelse are definitely interesting, but I don't think they are trying to dissuade use of the function. In fact, ifelse has the advantage of automatically vectorizing functions. For example, consider a slightly modified version of foo:

foo = function(a) { # Note that it now has an argument
 if(a) {
   return(a)
 } else {
   return(b)
 }
}

This function works fine when length(a) is 1. But if you rewrote foo with an ifelse

foo = function (a) ifelse(a,a,b)

Now foo works on any length of a. In fact, it would even work when a is a matrix. Returning a value the same shape as test is a feature that helps with vectorization, not a problem.

You can use TimerTask for Cronjobs.

Main.java

public class Main{
   public static void main(String[] args){

     Timer t = new Timer();
     MyTask mTask = new MyTask();
     // This task is scheduled to run every 10 seconds

     t.scheduleAtFixedRate(mTask, 0, 10000);
   }

}

MyTask.java

class MyTask extends TimerTask{

   public MyTask(){
     //Some stuffs
   }

   @Override
   public void run() {
     System.out.println("Hi see you after 10 seconds");
   }

}

• Timer

• TimerTask

Alternative You can also use ScheduledExecutorService.

If you really want to process your file line by line, a solution might be to use fgetl:

1. Open the data file with fopen
2. Read the next line into a character array using fgetl
3. Retreive the data you need using sscanf on the character array you just read
4. Perform any relevant test
5. Output what you want to another file
6. Back to point 2 if you haven't reached the end of your file.

Unlike the previous answer, this is not very much in the style of Matlab but it might be more efficient on very large files.

Hope this will help.

Here's a very simple way. Create two files:

protect-this.php

<?php
    /* Your password */
    $password = 'MYPASS';

    if (empty($_COOKIE['password']) || $_COOKIE['password'] !== $password) {
        // Password not set or incorrect. Send to login.php.
        header('Location: login.php');
        exit;
    }
?>

login.php:

<?php
    /* Your password */
    $password = 'MYPASS';

    /* Redirects here after login */
    $redirect_after_login = 'index.php';

    /* Will not ask password again for */
    $remember_password = strtotime('+30 days'); // 30 days

    if (isset($_POST['password']) && $_POST['password'] == $password) {
        setcookie("password", $password, $remember_password);
        header('Location: ' . $redirect_after_login);
        exit;
    }
?>
<!DOCTYPE html>
<html>
<head>
    <title>Password protected</title>
</head>
<body>
    <div style="text-align:center;margin-top:50px;">
        You must enter the password to view this content.
        <form method="POST">
            <input type="text" name="password">
        </form>
    </div>
</body>
</html>

Then require protect-this.php on the TOP of the files you want to protect:

// Password protect this content
require_once('protect-this.php');

Example result:

After filling the correct password, user is taken to index.php. The password is stored for 30 days.

PS: It's not focused to be secure, but to be pratical. A hacker can brute-force this. Use it to keep normal users away. Don't use it to protect sensitive information.

Just paste the below formula in any of the cells, it will render the path of the file:

=LEFT(CELL("filename"),FIND("]",CELL("filename"),1))

The above formula works in any version of Excel.

To understand this let's consider an example where we have a class Mammal which defines readAndGet method which is reading some file, doing some operation on it and returning an instance of class Mammal.

class Mammal {
    public Mammal readAndGet() throws IOException {//read file and return Mammal`s object}
}

Class Human extends class Mammal and overrides readAndGet method to return the instance of Human instead of the instance of Mammal.

class Human extends Mammal {
    @Override
    public Human readAndGet() throws FileNotFoundException {//read file and return Human object}
}

To call readAndGet we will need to handle IOException because its a checked exception and mammal's readAndMethod is throwing it.

Mammal mammal = new Human();
try {
    Mammal obj = mammal.readAndGet();
} catch (IOException ex) {..}

And we know that for compiler mammal.readAndGet() is getting called from the object of class Mammal but at, runtime JVM will resolve mammal.readAndGet() method call to a call from class Human because mammal is holding new Human().

Method readAndMethod from Mammal is throwing IOException and because it is a checked exception compiler will force us to catch it whenever we call readAndGet on mammal

Now suppose readAndGet in Human is throwing any other checked exception e.g. Exception and we know readAndGet will get called from the instance of Human because mammal is holding new Human().

Because for compiler the method is getting called from Mammal, so the compiler will force us to handle only IOException but at runtime we know method will be throwing Exception exception which is not getting handled and our code will break if the method throws the exception.

That's why it is prevented at the compiler level itself and we are not allowed to throw any new or broader checked exception because it will not be handled by JVM at the end.

There are other rules as well which we need to follow while overriding the methods and you can read more on Why We Should Follow Method Overriding Rules to know the reasons.

Seconds to h:mm:ss

var hours = Math.floor(time / 3600);
time -= hours * 3600;

var minutes = Math.floor(time / 60);
time -= minutes * 60;

var seconds = parseInt(time % 60, 10);

console.log(hours + ':' + (minutes < 10 ? '0' + minutes : minutes) + ':' + (seconds < 10 ? '0' + seconds : seconds));

There are five ways to convert The First Way :

String str = " 123" ;
int i = Integer.parse(str); 
output : 123

The second way :

String str = "hello123world";
int i = Integer.parse(str.replaceAll("[\\D]" , "" ) );
output : 123

The Third Way :

String str"123";
int i = new Integer(str);
output "123 

The Fourth Way :

String str"123";
int i = Integer.valueOf(Str);
output "123 

The Fifth Way :

String str"123";
int i = Integer.decode(str);
output "123 

There could be other ways But that's what I remember now

Here is the way I executed the program without environment variable configured.

Java file execution procedure: After you saved a file MyFirstJavaProgram.java

Enter the whole Path of "Javac" followed by java file For executing output Path of followed by comment <-cp> followed by followed by

Given below is the example of execution

C:\Program Files\Java\jdk1.8.0_101\bin>javac C:\Sample\MyFirstJavaProgram2.java C:\Program Files\Java\jdk1.8.0_101\bin>java -cp C:\Sample MyFirstJavaProgram2 Hello World

Any of the following will remove column foo from the data.table df3:

# Method 1 (and preferred as it takes 0.00s even on a 20GB data.table)
df3[,foo:=NULL]

df3[, c("foo","bar"):=NULL]  # remove two columns

myVar = "foo"
df3[, (myVar):=NULL]   # lookup myVar contents

# Method 2a -- A safe idiom for excluding (possibly multiple)
# columns matching a regex
df3[, grep("^foo$", colnames(df3)):=NULL]

# Method 2b -- An alternative to 2a, also "safe" in the sense described below
df3[, which(grepl("^foo$", colnames(df3))):=NULL]

data.table also supports the following syntax:

## Method 3 (could then assign to df3, 
df3[, !"foo"]  

though if you were actually wanting to remove column "foo" from df3 (as opposed to just printing a view of df3 minus column "foo") you'd really want to use Method 1 instead.

(Do note that if you use a method relying on grep() or grepl(), you need to set pattern="^foo$" rather than "foo", if you don't want columns with names like "fool" and "buffoon" (i.e. those containing foo as a substring) to also be matched and removed.)

Less safe options, fine for interactive use:

The next two idioms will also work -- if df3 contains a column matching "foo" -- but will fail in a probably-unexpected way if it does not. If, for instance, you use any of them to search for the non-existent column "bar", you'll end up with a zero-row data.table.

As a consequence, they are really best suited for interactive use where one might, e.g., want to display a data.table minus any columns with names containing the substring "foo". For programming purposes (or if you are wanting to actually remove the column(s) from df3 rather than from a copy of it), Methods 1, 2a, and 2b are really the best options.

# Method 4:
df3[, .SD, .SDcols = !patterns("^foo$")]

Lastly there are approaches using with=FALSE, though data.table is gradually moving away from using this argument so it's now discouraged where you can avoid it; showing here so you know the option exists in case you really do need it:

# Method 5a (like Method 3)
df3[, !"foo", with=FALSE] 
# Method 5b (like Method 4)
df3[, !grep("^foo$", names(df3)), with=FALSE]
# Method 5b (another like Method 4)
df3[, !grepl("^foo$", names(df3)), with=FALSE]

As explained, it is not possible. If you want to use a method of the subclass, evaluate the possibility to add the method to the superclass (may be empty) and call from the subclasses getting the behaviour you want (subclass) thanks to polymorphism. So when you call d.method() the call will succeed withoug casting, but in case the object will be not a dog, there will not be a problem

Here is what worked for me (Excel 14.0 - aka MS Office Pro Plus 2010):

=DATE(YEAR(A1), MONTH(A1), DAY(A1) - 16)

This takes the date (format mm/dd/yyyy) in cell A1 and subtracts 16 days with output in format of mm/dd/yyyy.

mvnrepository.com isn't a repository. It's a search engine. It might or might not tell you what repository it found stuff in if it's not central; since you didn't post an example, I can't help you read the output.

You should watch session 147 from the WWDC 2010 Session videos. It is "Advanced Performance Optimization on iPhone OS, part 2".
There is a lot of good advice on memory optimizations.

Some of the tips are:

• Use nested NSAutoReleasePools to make sure your memory usage does not spike.
• Use CGImageSource when creating thumbnails from large images.
• Respond to low memory warnings.

pdfunite is fine to merge entire PDFs. If you want, for example, pages 2-7 from file1.pdf and pages 1,3,4 from file2.pdf, you have to use pdfseparate to split the files into separate PDFs for each page to give to pdfunite.

At that point you probably want a program with more options. qpdf is the best utility I've found for manipulating PDFs. pdftk is bigger and slower and Red Hat/Fedora don't package it because of its dependency on gcj. Other PDF utilities have Mono or Python dependencies. I found qpdf produced a much smaller output file than using pdfseparate and pdfunite to assemble pages into a 30-page output PDF, 970kB vs. 1,6450 kB. Because it offers many more options, qpdf's command line is not as simple; the original request to merge file1 and file2 can be performed with

qpdf --empty --pages file1.pdf file2.pdf -- merged.pdf

JDBC uses a so-called "connection URL", so you can escape "+" by "%2B", that is

useTimezone=true&serverTimezone=GMT%2B8

Which version of bootstrap are you using? The early versions of Bootstrap 3 (3.0, 3.0.1) didn't work with this functionality.

col-md-offset-0 should be working as seen in this bootstrap example found here (http://getbootstrap.com/css/#grid-responsive-resets):

<div class="row">
   <div class="col-sm-5 col-md-6">.col-sm-5 .col-md-6</div>
   <div class="col-sm-5 col-sm-offset-2 col-md-6 col-md-offset-0">.col-sm-5 .col-sm-offset-2 .col-md-6 .col-md-offset-0</div>
</div>

As others have pointed out, paste() is the way to go. But it can get annoying to have to type paste(str1, str2, str3, sep='') everytime you want the non-default separator.

You can very easily create wrapper functions that make life much simpler. For instance, if you find yourself concatenating strings with no separator really often, you can do:

p <- function(..., sep='') {
    paste(..., sep=sep, collapse=sep)
}

or if you often want to join strings from a vector (like implode() from PHP):

implode <- function(..., sep='') {
     paste(..., collapse=sep)
}

Allows you do do this:

p('a', 'b', 'c')
#[1] "abc"
vec <- c('a', 'b', 'c')
implode(vec)
#[1] "abc"
implode(vec, sep=', ')
#[1] "a, b, c"

Also, there is the built-in paste0, which does the same thing as my implode, but without allowing custom separators. It's slightly more efficient than paste().

Email Validation Regex

^[a-z0-9][-a-z0-9._]+@([-a-z0-9]+.)+[a-z]{2,5}$

Or

^[a-z0-9][-a-z0-9._]+@([-a-z0-9]+[.])+[a-z]{2,5}$

Demo Link:

https://regex101.com/r/kN4nJ0/53

Here is the Answer

CSS

#outer
{
    width:100%;
    text-align: center;
}
.inner
{
    display: inline-block;
}

HTML

<div id="outer">
  <div class="inner"><button type="submit" class="msgBtn" onClick="return false;" >Save</button></div>
  <div class="inner"><button type="submit" class="msgBtn2" onClick="return false;">Publish</button></div>
  <div class="inner"><button class="msgBtnBack">Back</button></div>
</div>

Fiddle

You must be root.

sudo su -
asterisk -r

In addition to the answers given above, check the last line of the error message in your console. In my case, the 'site-packages' path in sys.path.append('.....') was wrong.

Check out the documentation

Quote:

QString provides many functions for converting numbers into strings and strings into numbers. See the arg() functions, the setNum() functions, the number() static functions, and the toInt(), toDouble(), and similar functions.

Hope this will help you..

var list = [];
    $(document).ready(function () {
        $('#test').click(function () {
            var oRows = $('#MainContent_Table1 tr').length;
            $('#MainContent_Table1 tr').each(function (index) {
                list.push(this.cells[0].innerHTML);
            });
        });
    });

popup method will give a secure question to visitor..

here is my simple solution: and working everyhere.

<script type="text/javascript">
    function targetMeBlank() {
        document.forms[0].target = "_blank";
    }
</script>

<asp:linkbutton  runat="server" ID="lnkbtn1" Text="target me to blank dude" OnClick="lnkbtn1_Click" OnClientClick="targetMeBlank();"/>

You can use the sp_who stored procedure.

Provides information about current users, sessions, and processes in an instance of the Microsoft SQL Server Database Engine. The information can be filtered to return only those processes that are not idle, that belong to a specific user, or that belong to a specific session.

Use DATE_ADD function

DATE_ADD(datecolumn, INTERVAL 30 MINUTE);

As mentioned in other answers, you can use set to list all the environment variables or use

set [environment_variable] to get a specific variable with its value.

set [environment_variable]= can be used to remove a variable from the workspace.

You can specify an empty string as an argument to join, if no argument is specified a comma is used.

 arr.join('');

http://jsfiddle.net/mowglisanu/CVr25/1/

<div class="container">
    <div class="row">
        <div class="col-md-12">
            <div class="row">
                <div class="col-md-4">  
                    <a href="">About</a>
                </div>
                <div class="col-md-4">
                    <img src="image.png">
                </div>
                <div class="col-md-4"> 
                    <a href="#myModal1" data-toggle="modal">SHARE</a>
                </div>
            </div>
        </div>
    </div>
</div>

You need to nest the interior columns inside of a row rather than just another column. It offsets the padding caused by the column with negative margins.

A simpler way would be

<div class="container">
   <div class="row">
       <div class="col-md-4">  
          <a href="">About</a>
       </div>
       <div class="col-md-4">
          <img src="image.png">
       </div>
       <div class="col-md-4"> 
           <a href="#myModal1" data-toggle="modal">SHARE</a>
       </div>
    </div>
</div>

Yess, possible with conditions:

If you have your app installed in the user phone and a server app communicating with this app, and there at last one of location service providers activated in the user phone, and some horrible android permissions!

In most of android phones there 3 location providers that can give exact location (GPS_PROVIDER 1m) or estimated (NETWORK_PROVIDER around 2-20m) and PASSIVE_PROVIDER (more in LocationManager official documentation).

1* App sends SMS to user's phone

Yess, can be server app or you create an android app if you want something automated, so you can do it manually by sending SMS from your default SMS app! I use Kannel: Open Source WAP and SMS Gateway and here (lot of APIs to send SMS )

2* App receives SMS at user's phone from the SMS sender

Yess, you can get all received SMS, and you can filter them by sender phone number! and do some actions when your specified sms received, basic tuto here (i do some actions according to the content of my SMS)

3* App gets location coordinates of the user's phone

Yess, you can get actual user coordinates easily if one of location providers is activated, so you can get last known location when the user have activated one of location providers, if those disabled or the phone don't have GPS hardware you can use Open Cell Id api to get the nearest cell coordinates(10m-10Km) or Loc8 api but those not available in all around the world, and some apps use IP location apis to get the country, city and province, here the simplest way to get current user location.

4* App sends location coordinates to the SMS sender via SMS

Yess, you can get sender phone number and send user location, immediately when SMS received or at specified times in the day.

(Those 4 yesses for you :) )

Viber and other apps that access to users locations, identify there users by there phone numbers by obligating them to send SMS to the server app to create an account and activate the free service (Ex:VOIP) , and lunch a service that can:

• Listen for location changes (GPS, Network or Cell Id)
• Send user location periodically(Ex: each 2 hours) or when user position changed!
• Stock user locations in file and create a map based on daily locations
• Receive SMS and update user location
• Receive server app commend and update user location
• Send events when user go inside or outside of a defined circle
• Listen for what user say and record it or open live voip call :s
• Maybe anything you think or u want to do :) !

And your application users must accept all of that when installing it, of corse i don't gonna install apps like this because i read permissions before installing :) and permissions maybe something like that:

<uses-permission android:name="android.permission.RECEIVE_SMS"></uses-permission>
<uses-permission android:name="android.permission.READ_SMS" />
<uses-permission android:name="android.permission.SEND_SMS"></uses-permission>

<uses-permission android:name="android.permission.ACCESS_FINE_LOCATION" />    
<uses-permission android:name="android.permission.INTERNET" />
<-- and more if you wanna more -->

The final user will accept for something like that (those permissions of an android app u asked about):

This app has access to these permissions:

Your accounts -create accounts and set passwords -find accounts on the device -add or remove accounts -use accounts on the device -read Google service configuration

Your location -approximate location (network-based) -precise location (GPS and network-based)

Your messages -receive text messages (SMS) -send SMS messages -edit your text messages (SMS or MMS) -read your text messages (SMS or MMS)

Network communication -receive data from Internet -full network access -view Wi-Fi connections -view network connections -change network connectivity

Phone calls -read phone status and identity -directly call phone numbers

Storage -modify or delete the contents of your USB storage

Your applications information -retrieve running apps -close other apps -run at startup

Bluetooth -pair with Bluetooth devices -access Bluetooth settings

Camera -take pictures and videos

Other Application UI -draw over other apps

Microphone -record audio

Lock screen -disable your screen lock

Your social information -read your contacts -modify your contacts -read call log -write call log -read your social stream -write to your social stream

Development tools -read sensitive log data

System tools -modify system settings -send sticky broadcast -test access to protected storage

Affects battery -control vibration -prevent device from sleeping

Audio settings -change your audio settings

Sync Settings -read sync settings -toggle sync on and off -read sync statistics

Wallpaper -set wallpaper

Store the Value of $_SESSION['username'] into a variable such as $username

$username=$_SESSION['username'];

$get = @mysql_query("SELECT money FROM players WHERE username = 
 '$username'");

it should work!

When an object in a TempDataDictionary is read, it will be marked for deletion at the end of that request.

That means if you put something on TempData like

TempData["value"] = "someValueForNextRequest";

And on another request you access it, the value will be there but as soon as you read it, the value will be marked for deletion:

//second request, read value and is marked for deletion
object value = TempData["value"];

//third request, value is not there as it was deleted at the end of the second request
TempData["value"] == null

The Peek and Keep methods allow you to read the value without marking it for deletion. Say we get back to the first request where the value was saved to TempData.

With Peek you get the value without marking it for deletion with a single call, see msdn:

//second request, PEEK value so it is not deleted at the end of the request
object value = TempData.Peek("value");

//third request, read value and mark it for deletion
object value = TempData["value"];

With Keep you specify a key that was marked for deletion that you want to keep. Retrieving the object and later on saving it from deletion are 2 different calls. See msdn

//second request, get value marking it from deletion
object value = TempData["value"];
//later on decide to keep it
TempData.Keep("value");

//third request, read value and mark it for deletion
object value = TempData["value"];

You can use Peek when you always want to retain the value for another request. Use Keep when retaining the value depends on additional logic.

You have 2 good questions about how TempData works here and here

Hope it helps!

Turn if off:

You can use error_reporting(); or put an @ in front of your fileopen().

value_counts is a Series method rather than a DataFrame method (and you are trying to use it on a DataFrame, clean). You need to perform this on a specific column:

clean[column_name].value_counts()

It doesn't usually make sense to perform value_counts on a DataFrame, though I suppose you could apply it to every entry by flattening the underlying values array:

pd.value_counts(df.values.flatten())

HTML

<div class='square-box'>
    <div class='square-content'>
        <h3>test</h3>
    </div>
</div>

CSS

.square-box{
    position: relative;
    width: 50%;
    overflow: hidden;
    background: #4679BD;
}
.square-box:before{
    content: "";
    display: block;
    padding-top: 100%;
}
.square-content{
    position:  absolute;
    top: 0;
    left: 0;
    bottom: 0;
    right: 0;
    color: white;
    text-align: center;
}

http://jsfiddle.net/38Tnx/1425/

Your countLines(String filename) method throws IOException.

You can't use it in a member declaration. You'll need to perform the operation in a main(String[] args) method.

Your main(String[] args) method will get the IOException thrown to it by countLines and it will need to handle or declare it.

Try this to just throw the IOException from main

public class MyClass {
  private int lineCount;
  public static void main(String[] args) throws IOException {
    lineCount = LineCounter.countLines(sFileName);
  }
}

or this to handle it and wrap it in an unchecked IllegalArgumentException:

public class MyClass {
  private int lineCount;
  private String sFileName  = "myfile";
  public static void main(String[] args) throws IOException {
    try {
      lineCount = LineCounter.countLines(sFileName);
     } catch (IOException e) {
       throw new IllegalArgumentException("Unable to load " + sFileName, e);
     }
  }
}

you need to wrap your text inside div and float it left while wrapper div should have height, and I've also added line height for vertical alignment

<div style="border-bottom-width: 1px; border-bottom-style: solid; border-bottom-color: gray;height:30px;">
   <div style="float:left;line-height:30px;">Contact Details</div>

    <button type="button" class="edit_button" style="float: right;">My Button</button>

</div>

also js fiddle here =) http://jsfiddle.net/xQgSm/

Open Chrome Developer Tools, go to Network tab, make your request (you may need to check "Preserve Log" if the page refreshes). Find the request on the left, right-click, "Copy as cURL".

Just for completeness' sake (sum is usually preferable), I wanted to mention that we can also use filter to get the truthy values. In the usual case, filter accepts a function as the first argument, but if you pass it None, it will filter for all "truthy" values. This feature is somewhat surprising, but is well documented and works in both Python 2 and 3.

The difference between the versions, is that in Python 2 filter returns a list, so we can use len:

>>> bool_list = [True, True, False, False, False, True]
>>> filter(None, bool_list)
[True, True, True]
>>> len(filter(None, bool_list))
3

But in Python 3, filter returns an iterator, so we can't use len, and if we want to avoid using sum (for any reason) we need to resort to converting the iterator to a list (which makes this much less pretty):

>>> bool_list = [True, True, False, False, False, True]
>>> filter(None, bool_list)
<builtins.filter at 0x7f64feba5710>
>>> list(filter(None, bool_list))
[True, True, True]
>>> len(list(filter(None, bool_list)))
3

fix function declaration on

int nonrecursivecountcells(color grid[ROW_SIZE][COL_SIZE], int row, int column)

Inline version:

<a href="http://yoursite.com/" style="text-decoration:none">yoursite</a>

However remember that you should generally separate the content of your website (which is HTML), from the presentation (which is CSS). Therefore you should generally avoid inline styles.

See John's answer to see equivalent answer using CSS.

By definition arrays are fixed size. You can use instead an Arraylist wich is that, a "dynamic size" array. Actually what happens is that the VM "adjust the size"* of the array exposed by the ArrayList.

See also

*using back-copy arrays

The only way to get true privacy in JS is through scoping, so there is no way to have a property that is a member of this that will be accessible only inside the component. The best way to store truly private data in ES6 is with a WeakMap.

const privateProp1 = new WeakMap();
const privateProp2 = new WeakMap();

class SomeClass {
  constructor() {
    privateProp1.set(this, "I am Private1");
    privateProp2.set(this, "I am Private2");

    this.publicVar = "I am public";
    this.publicMethod = () => {
      console.log(privateProp1.get(this), privateProp2.get(this))
    };        
  }

  printPrivate() {
    console.log(privateProp1.get(this));
  }
}

Obviously this is a probably slow, and definitely ugly, but it does provide privacy.

Keep in mind that EVEN THIS isn't perfect, because Javascript is so dynamic. Someone could still do

var oldSet = WeakMap.prototype.set;
WeakMap.prototype.set = function(key, value){
    // Store 'this', 'key', and 'value'
    return oldSet.call(this, key, value);
};

to catch values as they are stored, so if you wanted to be extra careful, you'd need to capture a local reference to .set and .get to use explicitly instead of relying on the overridable prototype.

const {set: WMSet, get: WMGet} = WeakMap.prototype;

const privateProp1 = new WeakMap();
const privateProp2 = new WeakMap();

class SomeClass {
  constructor() {
    WMSet.call(privateProp1, this, "I am Private1");
    WMSet.call(privateProp2, this, "I am Private2");

    this.publicVar = "I am public";
    this.publicMethod = () => {
      console.log(WMGet.call(privateProp1, this), WMGet.call(privateProp2, this))
    };        
  }

  printPrivate() {
    console.log(WMGet.call(privateProp1, this));
  }
}

Another solution, first considering the case where you don't care about collision location. Note that this particular function is built assuming vector input for xB and yB but can easily be modified if that is not the case. Variable names are defined at the start of the function

#Line segment points (A0, Af) defined by xA0, yA0, xAf, yAf; circle center denoted by xB, yB; rB=radius of circle, rA = radius of point (set to zero for your application)
def staticCollision_f(xA0, yA0, xAf, yAf, rA, xB, yB, rB): #note potential speed up here by casting all variables to same type and/or using Cython
    
    #Build equations of a line for linear agents (convert y = mx + b to ax + by + c = 0 means that a = -m, b = 1, c = -b
    m_v = (yAf - yA0) / (xAf - xA0)
    b_v = yAf - m_v * xAf
    rEff = rA + rB #radii are added since we are considering the agent path as a thin line

    #Check if points (circles) are within line segment (find center of line segment and check if circle is within radius of this point)
    segmentMask = np.sqrt( (yB - (yA0+yAf)/2)**2 + (xB - (xA0+xAf)/2)**2 ) < np.sqrt( (yAf - yA0)**2 + (xAf - xA0)**2 ) / 2 + rEff

    #Calculate perpendicular distance between line and a point
    dist_v = np.abs(-m_v * xB + yB - b_v) / np.sqrt(m_v**2 + 1)
    collisionMask = (dist_v < rEff) & segmentMask

    #return True if collision is detected
    return collisionMask, collisionMask.any()

If you need the location of the collision, you can use the approach detailed on this site, and set the velocity of one of the agents to zero. This approach works well with vector inputs as well: http://twobitcoder.blogspot.com/2010/04/circle-collision-detection.html