I think you are looking for JAX-WS authentication in application level, not HTTP basic in server level. See following complete example :

Application Authentication with JAX-WS

On the web service client site, just put your “username” and “password” into request header.

Map<String, Object> req_ctx = ((BindingProvider)port).getRequestContext();
req_ctx.put(BindingProvider.ENDPOINT_ADDRESS_PROPERTY, WS_URL);

Map<String, List<String>> headers = new HashMap<String, List<String>>();
headers.put("Username", Collections.singletonList("someUser"));
headers.put("Password", Collections.singletonList("somePass"));
req_ctx.put(MessageContext.HTTP_REQUEST_HEADERS, headers);

On the web service server site, get the request header parameters via WebServiceContext.

@Resource
WebServiceContext wsctx;

@WebMethod
public String method() {
    MessageContext mctx = wsctx.getMessageContext();

    Map http_headers = (Map) mctx.get(MessageContext.HTTP_REQUEST_HEADERS);
    List userList = (List) http_headers.get("Username");
    List passList = (List) http_headers.get("Password");
    //...

curl -u username:password http://
curl -u username http://

From the documentation page:

-u, --user <user:password>

Specify the user name and password to use for server authentication. Overrides -n, --netrc and --netrc-optional.

If you simply specify the user name, curl will prompt for a password.

The user name and passwords are split up on the first colon, which makes it impossible to use a colon in the user name with this option. The password can, still.

When using Kerberos V5 with a Windows based server you should include the Windows domain name in the user name, in order for the server to succesfully obtain a Kerberos Ticket. If you don't then the initial authentication handshake may fail.

When using NTLM, the user name can be specified simply as the user name, without the domain, if there is a single domain and forest in your setup for example.

To specify the domain name use either Down-Level Logon Name or UPN (User Principal Name) formats. For example, EXAMPLE\user and [email protected] respectively.

If you use a Windows SSPI-enabled curl binary and perform Kerberos V5, Negotiate, NTLM or Digest authentication then you can tell curl to select the user name and password from your environment by specifying a single colon with this option: "-u :".

If this option is used several times, the last one will be used.

http://curl.haxx.se/docs/manpage.html#-u

Note that you do not need --basic flag as it is the default.

You can use like this, it works!

        WebProxy proxy = new WebProxy
        {
            Address = new Uri(""),
            Credentials = new NetworkCredential("", "")
        };

        HttpClientHandler httpClientHandler = new HttpClientHandler
        {
            Proxy = proxy,
            UseProxy = true
        };

        HttpClient client = new HttpClient(httpClientHandler);

        HttpResponseMessage response = await client.PostAsync("...");

From RFC 1945 (HTTP/1.0) and RFC 2617 (HTTP Authentication referenced by HTTP/1.1)

The realm attribute (case-insensitive) is required for all authentication schemes which issue a challenge. The realm value (case-sensitive), in combination with the canonical root URL of the server being accessed, defines the protection space. These realms allow the protected resources on a server to be partitioned into a set of protection spaces, each with its own authentication scheme and/or authorization database. The realm value is a string, generally assigned by the origin server, which may have additional semantics specific to the authentication scheme.

In short, pages in the same realm should share credentials. If your credentials work for a page with the realm "My Realm", it should be assumed that the same username and password combination should work for another page with the same realm.

Open Project properties by selecting project then go to

View>Properties Windows

and make sure Anonymous Authentication is Enabled

1. Press the key combination Ctrl+Shift+Delete

2. You will see popup in chrome

3. Check the above options and click clear data and you are done.

If someone would need a one liner:

iwr -Uri 'https://api.github.com/user' -Headers @{ Authorization = "Basic "+ [System.Convert]::ToBase64String([System.Text.Encoding]::ASCII.GetBytes("user:pass")) }

You can also use the RestSharp library for example

var userName = "myuser";
var password = "mypassword";
var host = "170.170.170.170:333";
var client = new RestClient("https://" + host + "/method1");            
client.Authenticator = new HttpBasicAuthenticator(userName, password);            
var request = new RestRequest(Method.POST); 
request.AddHeader("Accept", "application/json");
request.AddHeader("Cache-Control", "no-cache");
request.AddHeader("Content-Type", "application/json");            
request.AddParameter("application/json","{}",ParameterType.RequestBody);
IRestResponse response = client.Execute(request);

Not necessarily true. It will be encrypted on the wire however it still lands in the logs plain text

I know this is a really old question but I wanted to add a bit of explanation that I discovered the hard way (this is n00b information).

"Basic Authentication" shares the same accounts that you have on your local computer or network. If you leave the domain and realm empty, local accounts are what are actually being used. So to add a new account you follow the exact process you would for adding a normal new user account to your local computer (as answered by JoshM or shown here). If you enter a domain and realm you can create network accounts in your local active directory and these are what will be used to log the user in and out.

Because it has been around for so long, basic authentication is generally compatible with any browser/system out there but it does have to major flaws:

• user and password are sent in the clear (except over SSL)
• you need to have a user account for each user or client

For more information about basic authentication or user accounts see the following MSDN page.

_x000D_
_x000D_
    function logout(secUrl, redirUrl) {_x000D_
        if (bowser.msie) {_x000D_
            document.execCommand('ClearAuthenticationCache', 'false');_x000D_
        } else if (bowser.gecko) {_x000D_
            $.ajax({_x000D_
                async: false,_x000D_
                url: secUrl,_x000D_
                type: 'GET',_x000D_
                username: 'logout'_x000D_
            });_x000D_
        } else if (bowser.webkit) {_x000D_
            var xmlhttp = new XMLHttpRequest();_x000D_
            xmlhttp.open("GET", secUrl, true);_x000D_
            xmlhttp.setRequestHeader("Authorization", "Basic logout");_x000D_
            xmlhttp.send();_x000D_
        } else {_x000D_
            alert("Logging out automatically is unsupported for " + bowser.name_x000D_
                + "\nYou must close the browser to log out.");_x000D_
        }_x000D_
        setTimeout(function () {_x000D_
            window.location.href = redirUrl;_x000D_
        }, 200);_x000D_
    }
_x000D_
_x000D_
_x000D_

I tried using the above in the following way.

?php
    ob_start();
    session_start();
    require_once 'dbconnect.php';

    // if session is not set this will redirect to login page
    if( !isset($_SESSION['user']) ) {
        header("Location: index.php");
        exit;
    }
    // select loggedin users detail
    $res=mysql_query("SELECT * FROM users WHERE userId=".$_SESSION['user']);
    $userRow=mysql_fetch_array($res);
?>
<!DOCTYPE html>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Welcome - <?php echo $userRow['userEmail']; ?></title>
<link rel="stylesheet" href="assets/css/bootstrap.min.css" type="text/css"  />
<link rel="stylesheet" href="style.css" type="text/css" />

    <script src="assets/js/bowser.min.js"></script>
<script>
//function logout(secUrl, redirUrl)
//bowser = require('bowser');
function logout(secUrl, redirUrl) {
alert(redirUrl);
    if (bowser.msie) {
        document.execCommand('ClearAuthenticationCache', 'false');
    } else if (bowser.gecko) {
        $.ajax({
            async: false,
            url: secUrl,
            type: 'GET',
            username: 'logout'
        });
    } else if (bowser.webkit) {
        var xmlhttp = new XMLHttpRequest();
        xmlhttp.open("GET", secUrl, true);
        xmlhttp.setRequestHeader("Authorization", "Basic logout");
        xmlhttp.send();
    } else {
        alert("Logging out automatically is unsupported for " + bowser.name
            + "\nYou must close the browser to log out.");
    }
    window.location.assign(redirUrl);
    /*setTimeout(function () {
        window.location.href = redirUrl;
    }, 200);*/
}


function f1()
    {
       alert("f1 called");
       //form validation that recalls the page showing with supplied inputs.    
    }
</script>
</head>
<body>

    <nav class="navbar navbar-default navbar-fixed-top">
      <div class="container">
        <div class="navbar-header">
          <button type="button" class="navbar-toggle collapsed" data-toggle="collapse" data-target="#navbar" aria-expanded="false" aria-controls="navbar">
            <span class="sr-only">Toggle navigation</span>
            <span class="icon-bar"></span>
            <span class="icon-bar"></span>
            <span class="icon-bar"></span>
          </button>
          <a class="navbar-brand" href="http://www.codingcage.com">Coding Cage</a>
        </div>
        <div id="navbar" class="navbar-collapse collapse">
          <ul class="nav navbar-nav">
            <li class="active"><a href="http://www.codingcage.com/2015/01/user-registration-and-login-script-using-php-mysql.html">Back to Article</a></li>
            <li><a href="http://www.codingcage.com/search/label/jQuery">jQuery</a></li>
            <li><a href="http://www.codingcage.com/search/label/PHP">PHP</a></li>
          </ul>
          <ul class="nav navbar-nav navbar-right">

            <li class="dropdown">
              <a href="#" class="dropdown-toggle" data-toggle="dropdown" role="button" aria-haspopup="true" aria-expanded="false">
              <span class="glyphicon glyphicon-user"></span>&nbsp;Hi' <?php echo $userRow['userEmail']; ?>&nbsp;<span class="caret"></span></a>
              <ul class="dropdown-menu">
                <li><a href="logout.php?logout"><span class="glyphicon glyphicon-log-out"></span>&nbsp;Sign Out</a></li>
              </ul>
            </li>
          </ul>
        </div><!--/.nav-collapse -->
      </div>
    </nav> 

    <div id="wrapper">

    <div class="container">

        <div class="page-header">
        <h3>Coding Cage - Programming Blog</h3>
        </div>

        <div class="row">
        <div class="col-lg-12" id="div_logout">
        <h1 onclick="logout(window.location.href, 'www.espncricinfo.com')">MichaelA1S1! Click here to see log out functionality upon click inside div</h1>
        </div>
        </div>

    </div>

    </div>

    <script src="assets/jquery-1.11.3-jquery.min.js"></script>
    <script src="assets/js/bootstrap.min.js"></script>


</body>
</html>
<?php ob_end_flush(); ?>

But it only redirects you to new location. No logout.

To help everyone avoid confusion, I will reformulate the question in two parts.

First : "how can make an authenticated HTTP request with a browser, using BASIC auth?".

In the browser you can do a http basic auth first by waiting the prompt to come, or by editing the URL if you follow this format: http://myusername:[email protected]

NB: the curl command mentionned in the question is perfectly fine, if you have a command-line and curl installed. ;)

References:

• https://en.wikipedia.org/wiki/Basic_access_authentication#URL_encoding
• https://en.wikipedia.org/wiki/Uniform_Resource_Locator#Syntax
• https://tools.ietf.org/html/rfc3986#page-18

Also according to the CURL manual page https://curl.haxx.se/docs/manual.html

HTTP

  Curl also supports user and password in HTTP URLs, thus you can pick a file
  like:

      curl http://name:[email protected]/full/path/to/file

  or specify user and password separately like in

      curl -u name:passwd http://machine.domain/full/path/to/file

  HTTP offers many different methods of authentication and curl supports
  several: Basic, Digest, NTLM and Negotiate (SPNEGO). Without telling which
  method to use, curl defaults to Basic. You can also ask curl to pick the
  most secure ones out of the ones that the server accepts for the given URL,
  by using --anyauth.

  NOTE! According to the URL specification, HTTP URLs can not contain a user
  and password, so that style will not work when using curl via a proxy, even
  though curl allows it at other times. When using a proxy, you _must_ use
  the -u style for user and password.

The second and real question is "However, on somesite.com, I'm not getting an authorization prompt at all, just a page that says I'm not authorized. Did somesite not implement the Basic Auth workflow correctly, or is there something else I need to do?"

The curl documentation says the -u option supports many method of authentication, Basic being the default.

You have to set the Authorization field in the header.

It contains the authentication type Basic in this case and the username:password combination which gets encoded in Base64:

var username = 'Test';
var password = '123';
var auth = 'Basic ' + Buffer.from(username + ':' + password).toString('base64');
// new Buffer() is deprecated from v6

// auth is: 'Basic VGVzdDoxMjM='

var header = {'Host': 'www.example.com', 'Authorization': auth};
var request = client.request('GET', '/', header);

There are multiple REST frameworks out there. I would strongly recommend looking into Slim mini Framework for PHP
Here is a list of others.

When you say adding antMatchers doesnt help - what do you mean? antMatchers is exactly how you do it. Something like the following should work (obviously changing your URL appropriately):

@Override
    public void configure(HttpSecurity http) throws Exception {
        http.authorizeRequests()
                .antMatchers("/authFailure").permitAll()
                .antMatchers("/resources/**").permitAll()
                .anyRequest().authenticated()

If you are still not having any joy, then you will need to provide more details/stacktrace etc.

Details of XML to Java config switch is here

With nginx you can send both tokens like this (even though it's against the standard):

Authorization: Basic basic-token,Bearer bearer-token

This works as long as the basic token is first - nginx successfully forwards it to the application server.

And then you need to make sure your application can properly extract the Bearer from the above string.

HTTP Basic Access Authentication

• STEP 1 : the client makes a request for information, sending a username and password to the server in plain text
• STEP 2 : the server responds with the desired information or an error

Basic Authentication uses base64 encoding(not encryption) for generating our cryptographic string which contains the information of username and password. HTTP Basic doesn’t need to be implemented over SSL, but if you don’t, it isn’t secure at all. So I’m not even going to entertain the idea of using it without.

Pros:

• Its simple to implement, so your client developers will have less work to do and take less time to deliver, so developers could be more likely to want to use your API
• Unlike Digest, you can store the passwords on the server in whatever encryption method you like, such as bcrypt, making the passwords more secure
• Just one call to the server is needed to get the information, making the client slightly faster than more complex authentication methods might be

Cons:

• SSL is slower to run than basic HTTP so this causes the clients to be slightly slower
• If you don’t have control of the clients, and can’t force the server to use SSL, a developer might not use SSL, causing a security risk

In Summary – if you have control of the clients, or can ensure they use SSL, HTTP Basic is a good choice. The slowness of the SSL can be cancelled out by the speed of only making one request

Syntax of basic Authentication

Value = username:password
Encoded Value =  base64(Value)
Authorization Value = Basic <Encoded Value> 
//at last Authorization key/value map added to http header as follows
Authorization: <Authorization Value>

HTTP Digest Access Authentication
Digest Access Authentication uses the hashing(i.e digest means cut into small pieces) methodologies to generate the cryptographic result. HTTP Digest access authentication is a more complex form of authentication that works as follows:

• STEP 1 : a client sends a request to a server
• STEP 2 : the server responds with a special code (called a nonce i.e. number used only once), another string representing the realm(a hash) and asks the client to authenticate
• STEP 3 : the client responds with this nonce and an encrypted version of the username, password and realm (a hash)
• STEP 4 : the server responds with the requested information if the client hash matches their own hash of the username, password and realm, or an error if not

Pros:

• No usernames or passwords are sent to the server in plaintext, making a non-SSL connection more secure than an HTTP Basic request that isn’t sent over SSL. This means SSL isn’t required, which makes each call slightly faster

Cons:

• For every call needed, the client must make 2, making the process slightly slower than HTTP Basic
• HTTP Digest is vulnerable to a man-in-the-middle security attack which basically means it could be hacked
• HTTP Digest prevents use of the strong password encryption, meaning the passwords stored on the server could be hacked

In Summary, HTTP Digest is inherently vulnerable to at least two attacks, whereas a server using strong encryption for passwords with HTTP Basic over SSL is less likely to share these vulnerabilities.

If you don’t have control over your clients however they could attempt to perform Basic authentication without SSL, which is much less secure than Digest.

RFC 2069 Digest Access Authentication Syntax

Hash1=MD5(username:realm:password)
Hash2=MD5(method:digestURI)
response=MD5(Hash1:nonce:Hash2)

RFC 2617 Digest Access Authentication Syntax

Hash1=MD5(username:realm:password)
Hash2=MD5(method:digestURI)
response=MD5(Hash1:nonce:nonceCount:cnonce:qop:Hash2)
//some additional parameters added 

source and example

In Postman looks as follows:

Note:

• The Basic and Digest schemes are dedicated to the authentication using a username and a secret.
• The Bearer scheme is dedicated to the authentication using a token.

If you're using an IIS Server, you could setup IIS URL Rewriting (v2) to rewrite the WWW-Authentication header to None on the requested URL.

Guide here.

The value you want to change is response_www_authenticate.

If you need more info, add a comment and I'll post the web.config file.

A stack is a collection of elements, which can be stored and retrieved one at a time. Elements are retrieved in reverse order of their time of storage, i.e. the latest element stored is the next element to be retrieved. A stack is sometimes referred to as a Last-In-First-Out (LIFO) or First-In-Last-Out (FILO) structure. Elements previously stored cannot be retrieved until the latest element (usually referred to as the 'top' element) has been retrieved.

A queue is a collection of elements, which can be stored and retrieved one at a time. Elements are retrieved in order of their time of storage, i.e. the first element stored is the next element to be retrieved. A queue is sometimes referred to as a First-In-First-Out (FIFO) or Last-In-Last-Out (LILO) structure. Elements subsequently stored cannot be retrieved until the first element (usually referred to as the 'front' element) has been retrieved.

To directly answer your question, yes, you can mock some methods without mocking others. This is called a partial mock. See the Mockito documentation on partial mocks for more information.

For your example, you can do something like the following, in your test:

Stock stock = mock(Stock.class);
when(stock.getPrice()).thenReturn(100.00);    // Mock implementation
when(stock.getQuantity()).thenReturn(200);    // Mock implementation
when(stock.getValue()).thenCallRealMethod();  // Real implementation

In that case, each method implementation is mocked, unless specify thenCallRealMethod() in the when(..) clause.

There is also a possibility the other way around with spy instead of mock:

Stock stock = spy(Stock.class);
when(stock.getPrice()).thenReturn(100.00);    // Mock implementation
when(stock.getQuantity()).thenReturn(200);    // Mock implementation
// All other method call will use the real implementations

In that case, all method implementation are the real one, except if you have defined a mocked behaviour with when(..).

There is one important pitfall when you use when(Object) with spy like in the previous example. The real method will be called (because stock.getPrice() is evaluated before when(..) at runtime). This can be a problem if your method contains logic that should not be called. You can write the previous example like this:

Stock stock = spy(Stock.class);
doReturn(100.00).when(stock).getPrice();    // Mock implementation
doReturn(200).when(stock).getQuantity();    // Mock implementation
// All other method call will use the real implementations

Another possibility may be to use org.mockito.Mockito.CALLS_REAL_METHODS, such as:

Stock MOCK_STOCK = Mockito.mock( Stock.class, CALLS_REAL_METHODS );

This delegates unstubbed calls to real implementations.

However, with your example, I believe it will still fail, since the implementation of getValue() relies on quantity and price, rather than getQuantity() and getPrice(), which is what you've mocked.

Another possibility is to avoid mocks altogether:

@Test
public void getValueTest() {
    Stock stock = new Stock(100.00, 200);
    double value = stock.getValue();
    assertEquals("Stock value not correct", 100.00*200, value, .00001);
}

You can use the following line of code in the activity's onCreate method to make sure the keyboard only pops up when a user clicks into an EditText

this.getWindow().setSoftInputMode(WindowManager.LayoutParams.SOFT_INPUT_STATE_ALWAYS_HIDDEN); 

Without explicitly providing the type as in command.Parameters.Add("@ID", SqlDbType.Int);, it will try to implicitly convert the input to what it is expecting.

The downside of this, is that the implicit conversion may not be the most optimal of conversions and may cause a performance hit.

There is a discussion about this very topic here: http://forums.asp.net/t/1200255.aspx/1

Here is a solution using apache HttpClient and making the call in a separate thread. This solution is useful if you are only making one async call. If you are making multiple calls I suggest using apache HttpAsyncClient and placing the calls in a thread pool.

import java.lang.Thread;

import org.apache.hc.client5.http.classic.methods.HttpGet;
import org.apache.hc.client5.http.impl.classic.CloseableHttpClient;
import org.apache.hc.client5.http.impl.classic.HttpClients;

public class ApacheHttpClientExample {
    public static void main(final String[] args) throws Exception {
        try (final CloseableHttpClient httpclient = HttpClients.createDefault()) {
            final HttpGet httpget = new HttpGet("http://httpbin.org/get");
            new Thread(() -> {
                 final String responseBody = httpclient.execute(httpget);
            }).start();
        }
    }
}

A little late this comment but I will leave here my results working with the library of SharePoin Online and it is very easy to use and implement in your project, just go to the NuGet administrator of .Net and Add Microsoft.SharePoint.CSOM to your project .

https://developer.microsoft.com/en-us/office/blogs/new-sharepoint-csom-version-released-for-office-365-may-2017/

The following code snippet will help you connect your credentials to your SharePoint site, you can also read and download files from a specific site and folder.

using System;
using System.IO;
using System.Linq;
using System.Web;
using Microsoft.SharePoint.Client;
using System.Security;

using ClientOM = Microsoft.SharePoint.Client;

namespace MvcApplication.Models.Home
{
    public class SharepointModel
    {
        public ClientContext clientContext { get; set; }
        private string ServerSiteUrl = "https://somecompany.sharepoint.com/sites/ITVillahermosa";
        private string LibraryUrl = "Shared Documents/Invoices/";
        private string UserName = "[email protected]";
        private string Password = "********";
        private Web WebClient { get; set; }

        public SharepointModel()
        {
            this.Connect();
        }

        public void Connect()
        {
            try
            {
                using (clientContext = new ClientContext(ServerSiteUrl))
                {
                    var securePassword = new SecureString();
                    foreach (char c in Password)
                    {
                        securePassword.AppendChar(c);
                    }

                    clientContext.Credentials = new SharePointOnlineCredentials(UserName, securePassword);
                    WebClient = clientContext.Web;
                }
            }
            catch (Exception ex)
            {
                throw (ex);
            }
        }

        public string UploadMultiFiles(HttpRequestBase Request, HttpServerUtilityBase Server)
        {
            try
            {
                HttpPostedFileBase file = null;
                for (int f = 0; f < Request.Files.Count; f++)
                {
                    file = Request.Files[f] as HttpPostedFileBase;

                    string[] SubFolders = LibraryUrl.Split('/');
                    string filename = System.IO.Path.GetFileName(file.FileName);
                    var path = System.IO.Path.Combine(Server.MapPath("~/App_Data/uploads"), filename);
                    file.SaveAs(path);

                    clientContext.Load(WebClient, website => website.Lists, website => website.ServerRelativeUrl);
                    clientContext.ExecuteQuery();

                    //https://somecompany.sharepoint.com/sites/ITVillahermosa/Shared Documents/
                    List documentsList = clientContext.Web.Lists.GetByTitle("Documents"); //Shared Documents -> Documents
                    clientContext.Load(documentsList, i => i.RootFolder.Folders, i => i.RootFolder);
                    clientContext.ExecuteQuery();

                    string SubFolderName = SubFolders[1];//Get SubFolder 'Invoice'
                    var folderToBindTo = documentsList.RootFolder.Folders;
                    var folderToUpload = folderToBindTo.Where(i => i.Name == SubFolderName).First();

                    var fileCreationInformation = new FileCreationInformation();
                    //Assign to content byte[] i.e. documentStream
                    fileCreationInformation.Content = System.IO.File.ReadAllBytes(path);
                    //Allow owerwrite of document
                    fileCreationInformation.Overwrite = true;
                    //Upload URL
                    fileCreationInformation.Url = ServerSiteUrl + LibraryUrl + filename;

                    Microsoft.SharePoint.Client.File uploadFile = documentsList.RootFolder.Files.Add(fileCreationInformation);

                    //Update the metadata for a field having name "DocType"
                    uploadFile.ListItemAllFields["Title"] = "UploadedCSOM";

                    uploadFile.ListItemAllFields.Update();
                    clientContext.ExecuteQuery();
                }

                return "";
            }
            catch (Exception ex)
            {
                throw (ex);
            }
        }

        public string DownloadFiles()
        {
            try
            {
                string tempLocation = @"c:\Downloads\Sharepoint\";
                System.IO.DirectoryInfo di = new DirectoryInfo(tempLocation);
                foreach (FileInfo file in di.GetFiles())
                {
                    file.Delete();
                }

                FileCollection files = WebClient.GetFolderByServerRelativeUrl(this.LibraryUrl).Files;
                clientContext.Load(files);
                clientContext.ExecuteQuery();

                if (clientContext.HasPendingRequest)
                    clientContext.ExecuteQuery();

                foreach (ClientOM.File file in files)
                {
                    FileInformation fileInfo = ClientOM.File.OpenBinaryDirect(clientContext, file.ServerRelativeUrl);
                    clientContext.ExecuteQuery();

                    var filePath = tempLocation + file.Name;
                    using (var fileStream = new System.IO.FileStream(filePath, System.IO.FileMode.Create))
                    {
                        fileInfo.Stream.CopyTo(fileStream);
                    }
                }

                return "";
            }
            catch (Exception ex)
            {
                throw (ex);
            }
        }

    }
}

Then to invoke the functions from the controller in this case MVC ASP.NET is done in the following way.

using MvcApplication.Models.Home;
using System;
using System.Web.Mvc;

namespace MvcApplication.Controllers
{
    public class SharepointController : MvcBoostraBaseController
    {
        [HttpPost]
        public ActionResult Upload(FormCollection form)
        {
            try
            {
                SharepointModel sharepointModel = new SharepointModel();
                return Json(sharepointModel.UploadMultiFiles(Request, Server), JsonRequestBehavior.AllowGet);
            }
            catch (Exception ex)
            {
                return ThrowJSONError(ex);
            }
        }

        public ActionResult Download(string ServerUrl, string RelativeUrl)
        {
            try
            {
                SharepointModel sharepointModel = new SharepointModel();
                return Json(sharepointModel.DownloadFiles(), JsonRequestBehavior.AllowGet);
            }
            catch (Exception ex)
            {
                return ThrowJSONError(ex);
            }
        }
    }
}

If you need the source code of this project you can request it to [email protected]

public class ListOfLists<T> : List<List<T>>
{
}


var myList = new ListOfLists<string>();

if you have vim installed,try this:

vimdiff file1 file2

or

vim -d file1 file2

you will find it fantastic.

If you want to get number of physical cores you can run cmd and terminal command and then to parse the output to get info you need.Below is shown function that returns number of physical cores .

private int getNumberOfCPUCores() {
    OSValidator osValidator = new OSValidator();
    String command = "";
    if(osValidator.isMac()){
        command = "sysctl -n machdep.cpu.core_count";
    }else if(osValidator.isUnix()){
        command = "lscpu";
    }else if(osValidator.isWindows()){
        command = "cmd /C WMIC CPU Get /Format:List";
    }
    Process process = null;
    int numberOfCores = 0;
    int sockets = 0;
    try {
        if(osValidator.isMac()){
            String[] cmd = { "/bin/sh", "-c", command};
            process = Runtime.getRuntime().exec(cmd);
        }else{
            process = Runtime.getRuntime().exec(command);
        }
    } catch (IOException e) {
        e.printStackTrace();
    }

    BufferedReader reader = new BufferedReader(
            new InputStreamReader(process.getInputStream()));
    String line;

    try {
        while ((line = reader.readLine()) != null) {
            if(osValidator.isMac()){
                numberOfCores = line.length() > 0 ? Integer.parseInt(line) : 0;
            }else if (osValidator.isUnix()) {
                if (line.contains("Core(s) per socket:")) {
                    numberOfCores = Integer.parseInt(line.split("\\s+")[line.split("\\s+").length - 1]);
                }
                if(line.contains("Socket(s):")){
                    sockets = Integer.parseInt(line.split("\\s+")[line.split("\\s+").length - 1]);
                }
            } else if (osValidator.isWindows()) {
                if (line.contains("NumberOfCores")) {
                    numberOfCores = Integer.parseInt(line.split("=")[1]);
                }
            }
        }
    } catch (IOException e) {
        e.printStackTrace();
    }
    if(osValidator.isUnix()){
        return numberOfCores * sockets;
    }
    return numberOfCores;
}

OSValidator class:

public class OSValidator {

private static String OS = System.getProperty("os.name").toLowerCase();

public static void main(String[] args) {

    System.out.println(OS);

    if (isWindows()) {
        System.out.println("This is Windows");
    } else if (isMac()) {
        System.out.println("This is Mac");
    } else if (isUnix()) {
        System.out.println("This is Unix or Linux");
    } else if (isSolaris()) {
        System.out.println("This is Solaris");
    } else {
        System.out.println("Your OS is not support!!");
    }
}

public static boolean isWindows() {
    return (OS.indexOf("win") >= 0);
}

public static boolean isMac() {
    return (OS.indexOf("mac") >= 0);
}

public static boolean isUnix() {
    return (OS.indexOf("nix") >= 0 || OS.indexOf("nux") >= 0 || OS.indexOf("aix") > 0 );
}

public static boolean isSolaris() {
    return (OS.indexOf("sunos") >= 0);
}
public static String getOS(){
    if (isWindows()) {
        return "win";
    } else if (isMac()) {
        return "osx";
    } else if (isUnix()) {
        return "uni";
    } else if (isSolaris()) {
        return "sol";
    } else {
        return "err";
    }
}

}

It is an error on all Samsung devices, the solution is: put this line in your activity declaration in Manifest.

android:configChanges="orientation|screenSize"

also when you start the activity you should do this:

Intent intent = new Intent(CurrentActivity.this, NextActivity.class);
intent.setType(Settings.ACTION_SYNC_SETTINGS);
CurrentActivity.this.startActivity(intent);
finish();

I used this to make an activity as fullscreen mode, but this question does not need the fullscreen code, but in all cases might someone need it you can refer to this question for the rest of the code:

How to make VideoView full screen

I use following code for get different result from condition That worked for me.

Select A.column, B.column
FROM TABLE1 A
INNER JOIN
TABLE2 B
ON A.Id = (case when (your condition) then b.Id else (something) END)

This comes up high on Google, so I'd like to add some contextual information about the original question (emphasis mine):

Why does Node.js' fs.readFile() return a buffer instead of string?

Because files aren't always text

Even if you as the programmer know it: Node has no idea what's in the file you're trying to read. It could be a text file, but it could just as well be a ZIP archive or a JPG image — Node doesn't know.

Because reading text files is tricky

Even if Node knew it were to read a text file, it still would have no idea which character encoding is used (i.e. how the bytes in the file map to human-readable characters), because the character encoding itself is not stored in the file.

There are ways to guess the character encoding of text files with more or less confidence (that's what text editors do when opening a file), but you usually don't want your code to rely on guesses without your explicit instruction.

Buffers to the rescue!

So, because it does not and can not know all these details, Node just reads the file byte for byte, without assuming anything about its contents.

And that's what the returned buffer is: an unopinionated container for raw binary content. How this content should be interpreted is up to you as the developer.

I've combined some of the above answers to come up with this to ensure that a given path entry exists exactly as given with as much brevity as possible and no junk echos on the command line.

set myPath=<pathToEnsure | %1>
echo ;%PATH%; | find /C /I ";%myPath%;" >nul
if %ERRORLEVEL% NEQ 0 set PATH=%PATH%;%myPath%

JavaScript has associative arrays.

Here is a working snippet.

<script type="text/javascript">
  var myArray = [];
  myArray['thank'] = 'you';
  myArray['no'] = 'problem';
  console.log(myArray);
</script>

They are simply called objects.

You can style it by the following way:

echo "<p style='color:red;'>" . $ip['cityName'] . "</p>";
echo "<p style='color:red;'>" . $ip['countryName'] . "</p>";

Here's a LESS mixin for transitioning two properties at once:

.transition-two(@transition1, @transition1-duration, @transition2, @transition2-duration) {
 -webkit-transition: @transition1 @transition1-duration, @transition2 @transition2-duration;
    -moz-transition: @transition1 @transition1-duration, @transition2 @transition2-duration;
      -o-transition: @transition1 @transition1-duration, @transition2 @transition2-duration;
          transition: @transition1 @transition1-duration, @transition2 @transition2-duration;
}

My vision is

• Unit testing. In Procedural programming unit is a procedure, in Object oriented programming unit is a class. Unit is isolated and reflects a developer perspective
• Functional testing - more than Unit. User perspective, which describes a feature, use case, story...
  • Integration testing - check if all separately developed components work together. It can be other application, service, library, database, network etc.
    • Narrow integration test - double^[About] is used. The main purpose is to check if component is configured in a right way
    • Broad integration test (End to End test, System test) - live version. The main purpose is to check if all components are configured in a right way
  • UI testing - checks if user input triggers a correct action and the UI is changed when some actions are happened
  • ...
• Non functional testing - other cases
  • Performance testing - calculate a speed and other metrics
  • Usability testing - UX
  • ...

You can update your provisioning certificates in XCode at:

Organizer -> Devices -> LIBRARY -> Provisioning Profiles

There is a refresh button :) So if you have created the certificate manually in iTunes connect, then you need to press this button or download the certificate manually.

Building on the other answers I've written this helper that accomplishes the task, including example usage:

public static class Helper
{
    public static List<T> RawSqlQuery<T>(string query, Func<DbDataReader, T> map)
    {
        using (var context = new DbContext())
        {
            using (var command = context.Database.GetDbConnection().CreateCommand())
            {
                command.CommandText = query;
                command.CommandType = CommandType.Text;

                context.Database.OpenConnection();

                using (var result = command.ExecuteReader())
                {
                    var entities = new List<T>();

                    while (result.Read())
                    {
                        entities.Add(map(result));
                    }

                    return entities;
                }
            }
        }
    }

Usage:

public class TopUser
{
    public string Name { get; set; }

    public int Count { get; set; }
}

var result = Helper.RawSqlQuery(
    "SELECT TOP 10 Name, COUNT(*) FROM Users U"
    + " INNER JOIN Signups S ON U.UserId = S.UserId"
    + " GROUP BY U.Name ORDER BY COUNT(*) DESC",
    x => new TopUser { Name = (string)x[0], Count = (int)x[1] });

result.ForEach(x => Console.WriteLine($"{x.Name,-25}{x.Count}"));

I plan to get rid of it as soon as built-in support is added. According to a statement by Arthur Vickers from the EF Core team it is a high priority for post 2.0. The issue is being tracked here.

Building on @sreedeep-kesav's answer (not enough rep to comment), Privacy - Camera Usage Description and Privacy - Photo Library Usage Description can be set by opening your Info.plist file in Xcode and selecting the plus button next to Information Property List:

The solution that i believe is best and optimized is:

try:
   #your code
except "ModelName".DoesNotExist:
   #your code

Ok, thanks for the more specific info, ppl may remove their downvotes now...

What you are proposing is a very common thing to do! You want to run your web application locally without uploading it to your host yet. That's totally fine and that's what your Apache is there for. Your Apache is a web server meaning its main purpose is to serve HTML, PHP, ASP, etc. files. Some like PHP; it first sends to the interpreter and then sends the rendered file to the browser. All in all: it's just serving pages to your browser (the client).

Your web server has a root directory which is wwwroot (IIS) or htdocs (apache, xampp) or something else like public_html, www or html, etc. It depends on your OS and web server.

Now if you type http://localhost into your browser, your browser will be directed to this webroot and the server will serve any index.html, index.php, etc. it can find there (in a customizable order).

If you have a project called "mytutorial" you can enter http://localhost/mytutorial and the server will show you the index-file of your tutorial, etc. If you look at the absolute path of this tutorial folder then it's just a subfolder of your webroot, which is itself located somewhere on your harddrive, but that doesn't matter for your localhost.

So the relative path is

http://localhost/mytutorial

while the absolute path may be

c:/webservices/apache/www

or

c:/xampp/htdocs

If you're working with Dreamweaver you can simplify the testing process by setting up your local server as a testing server in your project settings. Try it! It's easy. Once it's done, you can just press the browser icon with any of your files and it will open on localhost.

If you have this error in console ([$injector:nomod], MINERR_ASSET:22), make sure you are not including your application code before loading AngularJS

I was doing that and once I fixed the order, the error went away.

Maybe you received an error when working with this table before. You can rename the table and try to remove it again.

ALTER TABLE `area` RENAME TO `area2`;
DROP TABLE IF EXISTS `area2`;

Route::get('/', function () {
    return view('greeting', ['name' => 'James']);
});
<html>
    <body>
        <h1>Hello, {{ $name }}</h1>
    </body>
</html>

or

public function index($id)
{
    $category = Category::find($id);
    $topics = $category->getTopicPaginator();
    $message = Message::find(1);

    // here I would just use "->with([$category, $topics, $message])"
    return View::make('category.index')->with(compact('category', 'topics', 'message'));
}

Tick 'Full Index Enabled' and then 'Rebuild Index' of the central repository in 'Global Repositories' under Window > Show View > Other > Maven > Maven Repositories, and it should work.

The rebuilding may take a long time depending on the speed of your internet connection, but eventually it works.

Only syntactic sugar. No additional metadata.

namespace UserRole // grupy
{ 
    constexpr uint8_t dea = 1;
    constexpr uint8_t red = 2;
    constexpr uint8_t stu = 4;
    constexpr uint8_t kie = 8;
    constexpr uint8_t adm = 16;
    constexpr uint8_t mas = 32;
}

Flag operators on integral type just works.

Yes, it's possible, from @Fábio Zangirolami answer

audio::-webkit-media-controls-panel, video::-webkit-media-controls-panel {
                background-color: red;
}

If you want to change the format for all dates you can add a builder customizer. Here is an example of a bean that converts dates to ISO 8601:

@Bean
public Jackson2ObjectMapperBuilderCustomizer jsonCustomizer() {
    return new Jackson2ObjectMapperBuilderCustomizer() {
        @Override
        public void customize(Jackson2ObjectMapperBuilder builder) {
            builder.dateFormat(new ISO8601DateFormat());        
        }           
    };
}

here's the incantation for nginx, inside a

location / {
    # Simple requests
    if ($request_method ~* "(GET|POST)") {
      add_header "Access-Control-Allow-Origin"  *;
    }

    # Preflighted requests
    if ($request_method = OPTIONS ) {
      add_header "Access-Control-Allow-Origin"  *;
      add_header "Access-Control-Allow-Methods" "GET, POST, OPTIONS, HEAD";
      add_header "Access-Control-Allow-Headers" "Authorization, Origin, X-Requested-With, Content-Type, Accept";
    }

}

You'll need an additional utility such as cmdow.exe to accomplish this. Look specifically at the /mov switch. You can either launch your program from cmdow or run it separately and then invoke cmdow to move/resize it as desired.

I had the same problem thanks to french specials characters. Here is my class in case anybody needs it. It has to be saved here : /application/core/MY_Input.php

(also this extension will report witch character is not allowed in the future)

class MY_Input extends CI_Input {

function __construct()
{
parent::__construct();
}
/**
* Clean Keys
*
* This is a helper function. To prevent malicious users
* from trying to exploit keys we make sure that keys are
* only named with alpha-numeric text and a few other items.
*
* @access private
* @param string
* @return string
*/
function _clean_input_keys($str)
{
if ( ! preg_match("/^[a-z0-9:_\/-àâçéèêëîôùû]+$/i", $str))
{
exit('Disallowed Key Characters : '.$str);
}
// Clean UTF-8 if supported
if (UTF8_ENABLED === TRUE)
{
$str = $this->uni->clean_string($str);
}
return $str;
}

}

Read The Friendly Manual about core classes extension : http://ellislab.com/codeigniter/user-guide/general/core_classes.html

Try this

$date = Carbon::parse(date_format($youttimestring,'d/m/Y H:i:s'));
echo $date;

https://github.com/quartzjer/js0n

Ugliest interface possible, but does what you ask. Zero allocations.

http://zserge.com/jsmn.html Another zero-allocation approach.

The solutions posted above all do dynamic memory allocation, hence will be inevitably end up slower at some point, depending on the data structure - and will be dangerous to include in a heap constrained environment like an embedded system.

Benchmarks of vjson, rapidjson and sajson here : http://chadaustin.me/2013/01/json-parser-benchmarking/ if you are interested in that sort of thing.

And to answer your "writer" part of the question i doubt that you could beat an efficient

printf("{%s:%s}",name,value)

implementation with any library - assuming your printf/sprintf implementation itself is lightweight of course.

EDIT: actually let me take that back, RapidJson allows on-stack allocation only through its MemoryPoolAllocator and actually makes this a default for its GenericReader. I havent done the comparison but i would expect it to be more robust than anything else listed here. It also doesnt have any dependencies, and it doesnt throw exceptions which probably makes it ultimately suitable for embedded. Fully header based lib so, easy to include anywhere.

With SSL/https and with CSRF_COOKIE_HTTPONLY = False, I still don't have csrftoken in the cookie, either using the getCookie(name) function proposed in django Doc or the jquery.cookie.js proposed by fivef.

Wtower summary is perfect and I thought it would work after removing CSRF_COOKIE_HTTPONLY from settings.py but it does'nt in https!

Why csrftoken is not visible in document.cookie???

Instead of getting

"django_language=fr; csrftoken=rDrGI5cp98MnooPIsygWIF76vuYTkDIt"

I get only

"django_language=fr"

WHY? Like SSL/https removes X-CSRFToken from headers I thought it was due to the proxy header params of Nginx but apparently not... Any idea?

Unlike django doc Notes, it seems impossible to work with csrf_token in cookies with https. The only way to pass csrftoken is through the DOM by using {% csrf_token %} in html and get it in jQuery by using

var csrftoken = $('input[name="csrfmiddlewaretoken"]').val();

It is then possible to pass it to ajax either by header (xhr.setRequestHeader), either by params.

just put below code:

    implementation 'com.google.firebase:firebase-core:16.0.6'
    implementation 'com.google.firebase:firebase-database:16.0.6'

and rebuild. it works just for fine for me

Why is that not acceptable?

document.getElementById('test').innerHTML += str

would be the textbook way of doing it.

In Visual Studio 2015 (community edition), System.Windows.Forms is not available and hence we can't use MessageBox.Show("text").

Use this Instead:

var Msg = new MessageDialog("Some String here", "Title of Message Box");    
await Msg.ShowAsync();

Note: Your function must be defined async to use above await Msg.ShowAsync().

Date for the future 1 year can be done by

$('.date').datepicker({dateFormat: 'yy-mm-dd', minDate:(0), maxDate:(365)});

you can change the date format too by the parameter dateFormat

Scanner scanner = new Scanner(System.in);
int employeeId, supervisorId;
String name;
System.out.println("Enter employee ID:");
employeeId = scanner.nextInt();
scanner.nextLine(); //This is needed to pick up the new line
System.out.println("Enter employee name:");
name = scanner.nextLine();
System.out.println("Enter supervisor ID:");
supervisorId = scanner.nextInt();

Calling nextInt() was a problem as it didn't pick up the new line (when you hit enter). So, calling scanner.nextLine() after that does the work.

Try adding td {word-wrap: break-word;} to the css and see if it fixes it.

The pack method sizes the frame so that all its contents are at or above their preferred sizes. An alternative to pack is to establish a frame size explicitly by calling setSize or setBounds (which also sets the frame location). In general, using pack is preferable to calling setSize, since pack leaves the frame layout manager in charge of the frame size, and layout managers are good at adjusting to platform dependencies and other factors that affect component size.

From Java tutorial

You should also refer to Javadocs any time you need additional information on any Java API

@Override
public void onListItemClick(ListView l, View v, int pos, long id) {
    super.onListItemClick(l, v, pos, id);
    UserResult nextFrag= new UserResult();
    this.getFragmentManager().beginTransaction()
    .replace(R.id.content_frame, nextFrag, null)
    .addToBackStack(null)
    .commit();  
}

See ?boxplot for all the help you need.

 outline: if ‘outline’ is not true, the outliers are not drawn (as
          points whereas S+ uses lines).

boxplot(x,horizontal=TRUE,axes=FALSE,outline=FALSE)

And for extending the range of the whiskers and suppressing the outliers inside this range:

   range: this determines how far the plot whiskers extend out from the
          box.  If ‘range’ is positive, the whiskers extend to the most
          extreme data point which is no more than ‘range’ times the
          interquartile range from the box. A value of zero causes the
          whiskers to extend to the data extremes.

# change the value of range to change the whisker length
boxplot(x,horizontal=TRUE,axes=FALSE,range=2)

This is how to assign a value to a variable:

SELECT @EmpID = Id
  FROM dbo.Employee

However, the above query is returning more than one value. You'll need to add a WHERE clause in order to return a single Id value.

I had the same issue. Combining various approaches from the internet (and above) come up with the following approach (checkEmails.py)

class CheckMailer:

        def __init__(self, filename="LOG1.txt", mailbox="Mailbox - Another User Mailbox", folderindex=3):
            self.f = FileWriter(filename)
            self.outlook = win32com.client.Dispatch("Outlook.Application").GetNamespace("MAPI").Folders(mailbox)
            self.inbox = self.outlook.Folders(folderindex)


        def check(self):                
        #===============================================================================
        # for i in xrange(1,100):                           #Uncomment this section if index 3 does not work for you
        #     try:
        #         self.inbox = self.outlook.Folders(i)     # "6" refers to the index of inbox for Default User Mailbox
        #         print "%i %s" % (i,self.inbox)            # "3" refers to the index of inbox for Another user's mailbox
        #     except:
        #         print "%i does not work"%i
        #===============================================================================

                self.f.pl(time.strftime("%H:%M:%S"))
                tot = 0                
                messages = self.inbox.Items
                message = messages.GetFirst()
                while message:
                    self.f.pl (message.Subject)
                    message = messages.GetNext()
                    tot += 1
                self.f.pl("Total Messages found: %i" % tot)
                self.f.pl("-" * 80)
                self.f.flush()

if __name__ == "__main__":
    mail = CheckMailer()
    for i in xrange(320):  # this is 10.6 hours approximately
            mail.check()
            time.sleep(120.00)

For concistency I include also the code for the FileWriter class (found in FileWrapper.py). I needed this because trying to pipe UTF8 to a file in windows did not work.

class FileWriter(object):
    '''
    convenient file wrapper for writing to files
    '''


    def __init__(self, filename):
        '''
        Constructor
        '''
        self.file = open(filename, "w")

    def pl(self, a_string):
        str_uni = a_string.encode('utf-8')
        self.file.write(str_uni)
        self.file.write("\n")

    def flush(self):
        self.file.flush()

This question is asked every day in some variation. The answer is: keep your data out of your variable names, and this is the obligatory blog post.

In this case, why not make a list of objs?

objs = [MyClass() for i in range(10)]
for obj in objs:
    other_object.add(obj)

objs[0].do_sth()

I had this problem recently. I stumbled across an option: default_authentication_plugin

For some reason it had set it to caching_sha2_password, but updating the value to mysql_native_password fixed it for me. I'm not sure what the differences are, though, so be careful!

Hope this helps someone!

The || operator is "concatenate" - it joins together the two strings of its operands.

From http://www.sqlite.org/lang_expr.html

For padding, the seemingly-cheater way I've used is to start with your target string, say '0000', concatenate '0000423', then substr(result, -4, 4) for '0423'.

Update: Looks like there is no native implementation of "lpad" or "rpad" in SQLite, but you can follow along (basically what I proposed) here: http://verysimple.com/2010/01/12/sqlite-lpad-rpad-function/

-- the statement below is almost the same as
-- select lpad(mycolumn,'0',10) from mytable

select substr('0000000000' || mycolumn, -10, 10) from mytable

-- the statement below is almost the same as
-- select rpad(mycolumn,'0',10) from mytable

select substr(mycolumn || '0000000000', 1, 10) from mytable

Here's how it looks:

SELECT col1 || '-' || substr('00'||col2, -2, 2) || '-' || substr('0000'||col3, -4, 4)

it yields

"A-01-0001"
"A-01-0002"
"A-12-0002"
"C-13-0002"
"B-11-0002"

just open file then click on save as then name it as first.java then in that box there is another dropdown in that dropdown (save as type) select type as all and save it now you can compile it

You could try this

Calendar today = Calendar.getInstance (); 
today.add(Calendar.DAY_OF_YEAR, 0); 
today.set(Calendar.HOUR_OF_DAY, hrs); 
today.set(Calendar.MINUTE, mins ); 
today.set(Calendar.SECOND, 0); 

and you could use today.getTime() to retrieve value and compare.

See this link

public class ProductA
{ 
public string Name { get; set; }
public int Code { get; set; }
}

public class ProductComparer : IEqualityComparer<ProductA>
{

public bool Equals(ProductA x, ProductA y)
{
    //Check whether the objects are the same object. 
    if (Object.ReferenceEquals(x, y)) return true;

    //Check whether the products' properties are equal. 
    return x != null && y != null && x.Code.Equals(y.Code) && x.Name.Equals(y.Name);
    }

public int GetHashCode(ProductA obj)
{
    //Get hash code for the Name field if it is not null. 
    int hashProductName = obj.Name == null ? 0 : obj.Name.GetHashCode();

    //Get hash code for the Code field. 
    int hashProductCode = obj.Code.GetHashCode();

    //Calculate the hash code for the product. 
    return hashProductName ^ hashProductCode;
}
}


    ProductA[] store1 = { new ProductA { Name = "apple", Code = 9 }, 
                   new ProductA { Name = "orange", Code = 4 } };

    ProductA[] store2 = { new ProductA { Name = "apple", Code = 9 }, 
                   new ProductA { Name = "lemon", Code = 12 } };

//Get the products from the both arrays //excluding duplicates.

IEnumerable<ProductA> union =
  store1.Union(store2);

foreach (var product in union)
    Console.WriteLine(product.Name + " " + product.Code);

/*
    This code produces the following output:

    apple 9
    orange 4
    lemon 12
*/

You shouldn't rely on the order of elements by using prev or next. Just use the for attribute of the label, as it should correspond to the ID of the element you're currently manipulating:

var label = $("label[for='" + $(this).attr('id') + "']");

However, there are some cases where the label will not have for set, in which case the label will be the parent of its associated control. To find it in both cases, you can use a variation of the following:

var label = $('label[for="' + $(this).attr('id') + '"]');

if(label.length <= 0) {
    var parentElem = $(this).parent(),
        parentTagName = parentElem.get(0).tagName.toLowerCase();

    if(parentTagName == "label") {
        label = parentElem;
    }
}

I hope this helps!

The existing answers are good but don't cover what to do when a smart pointer is not the (complete) answer to the problem you are trying to solve.

Among other things (explained well in other answers) using a smart pointer is a possible solution to How do we use a abstract class as a function return type? which has been marked as a duplicate of this question. However, the first question to ask if tempted to specify an abstract (or in fact, any) base class as a return type in C++ is "what do you really mean?". There is a good discussion (with further references) of idiomatic object oriented programming in C++ (and how this is different to other languages) in the documentation of the boost pointer container library. In summary, in C++ you have to think about ownership. Which smart pointers help you with, but are not the only solution, or always a complete solution (they don't give you polymorphic copy) and are not always a solution you want to expose in your interface (and a function return sounds an awful lot like an interface). It might be sufficient to return a reference, for example. But in all of these cases (smart pointer, pointer container or simply returning a reference) you have changed the return from a value to some form of reference. If you really needed copy you may need to add more boilerplate "idiom" or move beyond idiomatic (or otherwise) OOP in C++ to more generic polymorphism using libraries like Adobe Poly or Boost.TypeErasure.

NodeJs is a JavaScript based server, so you can do the way you do that in pure JavaScript...

Imagine you have this Json in NodeJs...

var details = '{ "name": "Alireza Dezfoolian", "netWorth": "$0" }';
var obj = JSON.parse(details);

And you can do above to get a parsed version of your json...

I like using a background image. I find it easier and more flexible:

DEMO

CSS:

#menu {
    max-width: 1200px;
    text-align: center;
    margin: auto;
}
.zoomimg {
    display: inline-block;
    width: 250px;
    height: 375px;
    padding: 0px 5px 0px 5px;
    background-size: 100% 100%;
    background-repeat: no-repeat;
    background-position: center center;
    transition: all .5s ease;
}
.zoomimg:hover {
    cursor: pointer;
    background-size: 150% 150%;
}
.blog {
    background-image: url(http://s18.postimg.org/il7hbk7i1/image.png);
}
.music {
    background-image: url(http://s18.postimg.org/4st2fxgqh/image.png);
}
.projects {
    background-image: url(http://s18.postimg.org/sxtrxn115/image.png);
}
.bio {
    background-image: url(http://s18.postimg.org/5xn4lb37d/image.png);
}

HTML:

<div id="menu">
    <div class="blog zoomimg"></div>
    <div class="music zoomimg"></div>
    <div class="projects zoomimg"></div>
    <div class="bio zoomimg"></div>
</div>

DEMO 2 with Overlay

From https://github.com/Homebrew/brew/issues/4436#issuecomment-403194892

Issue solved by setting this env variable:

export HOMEBREW_FORCE_BREWED_CURL=1

Netstat tool simply parses some /proc files like /proc/net/tcp and combines it with other files contents. Yep, it's highly platform specific, but for Linux-only solution you can stick with it. Linux kernel documentation describes these files in details so you can find there how to read them.

Please also notice your question is too ambiguous because "port" could also mean serial port (/dev/ttyS* and analogs), parallel port, etc.; I've reused understanding from another answer this is network port but I'd ask you to formulate your questions more accurately.

I realise this is an old question, but another possible consideration depending on your exact requirements is that validating on https://validator.w3.org/ generates warnings as follows:

Warning: The form role is unnecessary for element form.

I think that you only have to replace SHA1 function with SHA256 function with tatk code from link in Your post

just write /Library/Java/JavaVirtualMachines/
in Go to Folder --> Go in Finder

The title of the question asks about precision. BigDecimal distinguishes between scale and precision. Scale is the number of decimal places. You can think of precision as the number of significant figures, also known as significant digits.

Some examples in Clojure.

(.scale     0.00123M) ; 5
(.precision 0.00123M) ; 3

(In Clojure, The M designates a BigDecimal literal. You can translate the Clojure to Java if you like, but I find it to be more compact than Java!)

You can easily increase the scale:

(.setScale 0.00123M 7) ; 0.0012300M

But you can't decrease the scale in the exact same way:

(.setScale 0.00123M 3) ; ArithmeticException Rounding necessary

You'll need to pass a rounding mode too:

(.setScale 0.00123M 3 BigDecimal/ROUND_HALF_EVEN) ;
; Note: BigDecimal would prefer that you use the MathContext rounding
; constants, but I don't have them at my fingertips right now.

So, it is easy to change the scale. But what about precision? This is not as easy as you might hope!

It is easy to decrease the precision:

(.round 3.14159M (java.math.MathContext. 3)) ; 3.14M

But it is not obvious how to increase the precision:

(.round 3.14159M (java.math.MathContext. 7)) ; 3.14159M (unexpected)

For the skeptical, this is not just a matter of trailing zeros not being displayed:

(.precision (.round 3.14159M (java.math.MathContext. 7))) ; 6 
; (same as above, still unexpected)

FWIW, Clojure is careful with trailing zeros and will show them:

4.0000M ; 4.0000M
(.precision 4.0000M) ; 5

Back on track... You can try using a BigDecimal constructor, but it does not set the precision any higher than the number of digits you specify:

(BigDecimal. "3" (java.math.MathContext. 5)) ; 3M
(BigDecimal. "3.1" (java.math.MathContext. 5)) ; 3.1M

So, there is no quick way to change the precision. I've spent time fighting this while writing up this question and with a project I'm working on. I consider this, at best, A CRAZYTOWN API, and at worst a bug. People. Seriously?

So, best I can tell, if you want to change precision, you'll need to do these steps:

1. Lookup the current precision.
2. Lookup the current scale.
3. Calculate the scale change.
4. Set the new scale

These steps, as Clojure code:

(def x 0.000691M) ; the input number
(def p' 1) ; desired precision
(def s' (+ (.scale x) p' (- (.precision x)))) ; desired new scale
(.setScale x s' BigDecimal/ROUND_HALF_EVEN)
; 0.0007M

I know, this is a lot of steps just to change the precision!

Why doesn't BigDecimal already provide this? Did I overlook something?

You can simply use NSURLCredential, it will save both username and password in the keychain in just two lines of code.

See my detailed answer.

I have JQuery UI 1.8.11 version and this is my working code. You can also customize its height and width depending on your requirements.

$("#divMain").dialog({
    modal:true,
    autoOpen: false,
    maxWidth: 500,
    maxHeight: 300,
    width: 500,
    height: 300,
    title: "Customize Dialog",
        buttons: {
            "SAVE": function () {
                //Add your functionalities here
            },
            "Cancel": function () {
                $(this).dialog("close");
            }
        },
        close: function () {}
});

Apparently the files were added in remote repository, no matter what was the content of .gitignore file in the origin.

As the files exist in the remote repository, git has to pull them to your local work tree as well and therefore complains that the files already exist.

.gitignore is used only for scanning for the newly added files, it doesn't have anything to do with the files which were already added.

So the solution is to remove the files in your work tree and pull the latest version. Or the long-term solution is to remove the files from the repository if they were added by mistake.

A simple example to remove files from the remote branch is to

$git checkout <brachWithFiles>
$git rm -r *.extension
$git commit -m "fixin...."
$git push

Then you can try the $git merge again

These are my two suggestions.

1. Using classes. There is no need to specify width of the two other columns as they will be set to 15% each automatically by the browser.

   _x000D_

   _x000D_

       table { table-layout: fixed; }_x000D_
       .subject { width: 70%; }

   _x000D_

       <table>_x000D_
         <tr>_x000D_
           <th>From</th>_x000D_
           <th class="subject">Subject</th>_x000D_
           <th>Date</th>_x000D_
         </tr>_x000D_
       </table>

   _x000D_

   _x000D_
   _x000D_

2. Without using classes. Three different methods but the result is identical.

   a)

   _x000D_

   _x000D_

       table { table-layout: fixed; }_x000D_
       th+th { width: 70%; }_x000D_
       th+th+th { width: 15%; }

   _x000D_

       <table>_x000D_
         <tr>_x000D_
           <th>From</th>_x000D_
           <th>Subject</th>_x000D_
           <th>Date</th>_x000D_
         </tr>_x000D_
       </table>

   _x000D_

   _x000D_
   _x000D_

   b)

   _x000D_

   _x000D_

       table { table-layout: fixed; }_x000D_
       th:nth-of-type(2) { width: 70%; }

   _x000D_

       <table>_x000D_
         <tr>_x000D_
           <th>From</th>_x000D_
           <th>Subject</th>_x000D_
           <th>Date</th>_x000D_
         </tr>_x000D_
       </table>

   _x000D_

   _x000D_
   _x000D_

   c) This one is my favourite. Same as b) but with better browser support.

   _x000D_

   _x000D_

       table { table-layout: fixed; }_x000D_
       th:first-child+th { width: 70%; }

   _x000D_

       <table>_x000D_
         <tr>_x000D_
           <th>From</th>_x000D_
           <th>Subject</th>_x000D_
           <th>Date</th>_x000D_
         </tr>_x000D_
       </table>

   _x000D_

   _x000D_
   _x000D_

I was getting same issue, i.e. protocol handler start failed. Cause was port is already in use. I found whether the port was in use or not. It was. So I killed the process that was running on that port and restarted my spring boot application. And it worked. :)

Let the command you are trying to pass be

os.system('x')

then you covert it to a statement

t = os.system('x')

now the python will be waiting for the output from the commandline so that it could be assigned to the variable t.

By default, most of distribution uses Ctrl+F12.

Some OS distribution (in my case Xubuntu) which uses Xcfe, overrides Ctrl+F12 to "Workspace 12" switch.

I think you need to make the .holder position:relative; and .popup position:absolute;

You'd be surprised to find out that 80/20 is quite a commonly occurring ratio, often referred to as the Pareto principle. It's usually a safe bet if you use that ratio.

However, depending on the training/validation methodology you employ, the ratio may change. For example: if you use 10-fold cross validation, then you would end up with a validation set of 10% at each fold.

There has been some research into what is the proper ratio between the training set and the validation set:

The fraction of patterns reserved for the validation set should be inversely proportional to the square root of the number of free adjustable parameters.

In their conclusion they specify a formula:

Validation set (v) to training set (t) size ratio, v/t, scales like ln(N/h-max), where N is the number of families of recognizers and h-max is the largest complexity of those families.

What they mean by complexity is:

Each family of recognizer is characterized by its complexity, which may or may not be related to the VC-dimension, the description length, the number of adjustable parameters, or other measures of complexity.

Taking the first rule of thumb (i.e.validation set should be inversely proportional to the square root of the number of free adjustable parameters), you can conclude that if you have 32 adjustable parameters, the square root of 32 is ~5.65, the fraction should be 1/5.65 or 0.177 (v/t). Roughly 17.7% should be reserved for validation and 82.3% for training.

I think that you are after this:

SELECT image_id
FROM list
WHERE (style_id, style_value) IN ((24,'red'),(25,'big'),(27,'round'))
GROUP BY image_id
HAVING count(distinct style_id, style_value)=3

You can't use AND, because values can't be 24 red and 25 big and 27 round at the same time in the same row, but you need to check the presence of style_id, style_value in multiple rows, under the same image_id.

In this query I'm using IN (that, in this particular example, is equivalent to an OR), and I am counting the distinct rows that match. If 3 distinct rows match, it means that all 3 attributes are present for that image_id, and my query will return it.

try this with quick sort:

function sort(arr, compareFn = (a, b) => a <= b) {

    if (!arr instanceof Array || arr.length === 0) {
        return arr;
    }

    if (typeof compareFn !== 'function') {
        throw new Error('compareFn is not a function!');
    }

    const partition = (arr, low, high) => {
        const pivot = arr[low];
        while (low < high) {
            while (low < high && compareFn(pivot, arr[high])) {
                --high;
            }
            arr[low] = arr[high];
            while (low < high && compareFn(arr[low], pivot)) {
                ++low;
            }
            arr[high] = arr[low];
        }
        arr[low] = pivot;
        return low;
    };

    const quickSort = (arr, low, high) => {
        if (low < high) {
            let pivot = partition(arr, low, high);
            quickSort(arr, low, pivot - 1);
            quickSort(arr, pivot + 1, high);
        }
        return arr;
    };

    return quickSort(arr, 0, arr.length - 1);
}

To clarify some of the logical equivalence solutions.

An if statement

if (a) then b

is logically equivalent to

(!a || b)

It's the first line on the Logical equivalences involving conditional statements section of the Logical equivalence wikipedia article.

To include the else, all you would do is add another conditional

if(a) then b; 
if(!a) then c;

which is logically equivalent to (!a || b) && (a || c)

So using the OP as an example:

IF IsNumeric(@OrderNumber) = 1
    OrderNumber = @OrderNumber
ELSE
    OrderNumber LIKE '%' + @OrderNumber + '%'

the logical equivalent would be:

(IsNumeric(@OrderNumber) <> 1 OR OrderNumber = @OrderNumber)
AND (IsNumeric(@OrderNumber) = 1 OR OrderNumber LIKE '%' + @OrderNumber + '%' )

The problem is that you set cipherText to empty string at every cycle iteration, the line

cipherText = ""

must be moved before the loop.

Remember a string is immutable so you will need to create a new string.

Strings are IEnumerable so you should be able to run a for loop over it

using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;

namespace ConsoleApplication1
{
    class Program
    {
        static void Main(string[] args)
        {
            string alpha = "abcdefghijklmnopqrstuvwxyz";
            var builder = new StringBuilder();
            int count = 0;
            foreach (var c in alpha)
            {
                builder.Append(c);
                if ((++count % 5) == 0)
                {
                    builder.Append('-');
                }
            }
            Console.WriteLine("Before: {0}", alpha);
            alpha = builder.ToString();
            Console.WriteLine("After: {0}", alpha);
        }
    }
}

Produces this:

Before: abcdefghijklmnopqrstuvwxyz
After: abcde-fghij-klmno-pqrst-uvwxy-z

PHP > 5.3 use fgetcsv() or str_getcsv(). Couldn't be simpler.

I recently had the requirement to use JNDI with an embedded Tomcat in Spring Boot.
Actual answers give some interesting hints to solve my task but it was not enough as probably not updated for Spring Boot 2.

Here is my contribution tested with Spring Boot 2.0.3.RELEASE.

Specifying a datasource available in the classpath at runtime

You have multiple choices :

• using the DBCP 2 datasource (you don't want to use DBCP 1 that is outdated and less efficient).
• using the Tomcat JDBC datasource.
• using any other datasource : for example HikariCP.

If you don't specify anyone of them, with the default configuration the instantiation of the datasource will throw an exception :

Caused by: javax.naming.NamingException: Could not create resource factory instance
        at org.apache.naming.factory.ResourceFactory.getDefaultFactory(ResourceFactory.java:50)
        at org.apache.naming.factory.FactoryBase.getObjectInstance(FactoryBase.java:90)
        at javax.naming.spi.NamingManager.getObjectInstance(NamingManager.java:321)
        at org.apache.naming.NamingContext.lookup(NamingContext.java:839)
        at org.apache.naming.NamingContext.lookup(NamingContext.java:159)
        at org.apache.naming.NamingContext.lookup(NamingContext.java:827)
        at org.apache.naming.NamingContext.lookup(NamingContext.java:159)
        at org.apache.naming.NamingContext.lookup(NamingContext.java:827)
        at org.apache.naming.NamingContext.lookup(NamingContext.java:159)
        at org.apache.naming.NamingContext.lookup(NamingContext.java:827)
        at org.apache.naming.NamingContext.lookup(NamingContext.java:173)
        at org.apache.naming.SelectorContext.lookup(SelectorContext.java:163)
        at javax.naming.InitialContext.lookup(InitialContext.java:417)
        at org.springframework.jndi.JndiTemplate.lambda$lookup$0(JndiTemplate.java:156)
        at org.springframework.jndi.JndiTemplate.execute(JndiTemplate.java:91)
        at org.springframework.jndi.JndiTemplate.lookup(JndiTemplate.java:156)
        at org.springframework.jndi.JndiTemplate.lookup(JndiTemplate.java:178)
        at org.springframework.jndi.JndiLocatorSupport.lookup(JndiLocatorSupport.java:96)
        at org.springframework.jndi.JndiObjectLocator.lookup(JndiObjectLocator.java:114)
        at org.springframework.jndi.JndiObjectTargetSource.getTarget(JndiObjectTargetSource.java:140)
        ... 39 common frames omitted
Caused by: java.lang.ClassNotFoundException: org.apache.tomcat.dbcp.dbcp2.BasicDataSourceFactory
        at java.net.URLClassLoader.findClass(URLClassLoader.java:381)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:424)
        at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:331)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:357)
        at java.lang.Class.forName0(Native Method)
        at java.lang.Class.forName(Class.java:264)
        at org.apache.naming.factory.ResourceFactory.getDefaultFactory(ResourceFactory.java:47)
        ... 58 common frames omitted

• To use Apache JDBC datasource, you don't need to add any dependency but you have to change the default factory class to org.apache.tomcat.jdbc.pool.DataSourceFactory.
  You can do it in the resource declaration : resource.setProperty("factory", "org.apache.tomcat.jdbc.pool.DataSourceFactory"); I will explain below where add this line.

• To use DBCP 2 datasource a dependency is required:

  <dependency> <groupId>org.apache.tomcat</groupId> <artifactId>tomcat-dbcp</artifactId> <version>8.5.4</version> </dependency>

Of course, adapt the artifact version according to your Spring Boot Tomcat embedded version.

• To use HikariCP, add the required dependency if not already present in your configuration (it may be if you rely on persistence starters of Spring Boot) such as :

  <dependency> <groupId>com.zaxxer</groupId> <artifactId>HikariCP</artifactId> <version>3.1.0</version> </dependency>

and specify the factory that goes with in the resource declaration:

resource.setProperty("factory", "com.zaxxer.hikari.HikariJNDIFactory");

Datasource configuration/declaration

You have to customize the bean that creates the TomcatServletWebServerFactory instance.
Two things to do :

• enabling the JNDI naming which is disabled by default

• creating and add the JNDI resource(s) in the server context

For example with PostgreSQL and a DBCP 2 datasource, do that :

@Bean
public TomcatServletWebServerFactory tomcatFactory() {
    return new TomcatServletWebServerFactory() {
        @Override
        protected TomcatWebServer getTomcatWebServer(org.apache.catalina.startup.Tomcat tomcat) {
            tomcat.enableNaming(); 
            return super.getTomcatWebServer(tomcat);
        }

        @Override 
        protected void postProcessContext(Context context) {

            // context
            ContextResource resource = new ContextResource();
            resource.setName("jdbc/myJndiResource");
            resource.setType(DataSource.class.getName());
            resource.setProperty("driverClassName", "org.postgresql.Driver");

            resource.setProperty("url", "jdbc:postgresql://hostname:port/dbname");
            resource.setProperty("username", "username");
            resource.setProperty("password", "password");
            context.getNamingResources()
                   .addResource(resource);          
        }
    };
}

Here the variants for Tomcat JDBC and HikariCP datasource.

In postProcessContext() set the factory property as explained early for Tomcat JDBC ds :

    @Override 
    protected void postProcessContext(Context context) {
        ContextResource resource = new ContextResource();       
        //...
        resource.setProperty("factory", "org.apache.tomcat.jdbc.pool.DataSourceFactory");
        //...
        context.getNamingResources()
               .addResource(resource);          
    }
};

and for HikariCP :

    @Override 
    protected void postProcessContext(Context context) {
        ContextResource resource = new ContextResource();       
        //...
        resource.setProperty("factory", "com.zaxxer.hikari.HikariDataSource");
        //...
        context.getNamingResources()
               .addResource(resource);          
    }
};

Using/Injecting the datasource

You should now be able to lookup the JNDI ressource anywhere by using a standard InitialContext instance :

InitialContext initialContext = new InitialContext();
DataSource datasource = (DataSource) initialContext.lookup("java:comp/env/jdbc/myJndiResource");

You can also use JndiObjectFactoryBean of Spring to lookup up the resource :

JndiObjectFactoryBean bean = new JndiObjectFactoryBean();
bean.setJndiName("java:comp/env/jdbc/myJndiResource");
bean.afterPropertiesSet();
DataSource object = (DataSource) bean.getObject();

To take advantage of the DI container you can also make the DataSource a Spring bean :

@Bean(destroyMethod = "")
public DataSource jndiDataSource() throws IllegalArgumentException, NamingException {
    JndiObjectFactoryBean bean = new JndiObjectFactoryBean();
    bean.setJndiName("java:comp/env/jdbc/myJndiResource");
    bean.afterPropertiesSet();
    return (DataSource) bean.getObject();
}

And so you can now inject the DataSource in any Spring beans such as :

@Autowired
private DataSource jndiDataSource;

Note that many examples on the internet seem to disable the lookup of the JNDI resource on startup :

bean.setJndiName("java:comp/env/jdbc/myJndiResource");
bean.setProxyInterface(DataSource.class);
bean.setLookupOnStartup(false);
bean.afterPropertiesSet(); 

But I think that it is helpless as it invokes just after afterPropertiesSet() that does the lookup !

Use

substring_index(`column`,',',1) ==> first value
substring_index(substring_index(`column`,',',-2),',',1)=> second value
substring_index(substring_index(`column`,',',-1),',',1)=> third value

in your where clause.

SELECT * FROM `table`
WHERE 
substring_index(`column`,',',1)<0 
AND
substring_index(`column`,',',1)>5

Use this as it can also act as responsive. :

background-size: cover;

As the thread mentioned in the comment, get-command in powershell can also work it out. For example, you can type get-command npm and the output is as below:

Do you mean something like this?

HTML

<button class="test"></button>

CSS

.test{
    height:200px;
    width:200px;
}

If you want to use inline CSS instead of an external stylesheet, see this:

<button style="height:200px;width:200px"></button>

or convert gilly3's excellent answer to a jQuery method:

$.fn.info = function () {
    var data = {};
    [].forEach.call(this.get(0).attributes, function (attr) {
        if (/^data-/.test(attr.name)) {
            var camelCaseName = attr.name.substr(5).replace(/-(.)/g, function ($0, $1) {
                return $1.toUpperCase();
            });
            data[camelCaseName] = attr.value;
        }
    });
    return data;
}

Using: $('.foo').info();

Use ngInit: https://docs.angularjs.org/api/ng/directive/ngInit

<div ng-repeat="day in forecast_days" ng-init="f = forecast[day.iso]">
  {{$index}} - {{day.iso}} - {{day.name}}
  Temperature: {{f.temperature}}<br>
  Humidity: {{f.humidity}}<br>
  ...
</div>

Example: http://jsfiddle.net/coma/UV4qF/

Java 7 and later

Multiple-exception catches are supported, starting in Java 7.

The syntax is:

try {
     // stuff
} catch (Exception1 | Exception2 ex) {
     // Handle both exceptions
}

The static type of ex is the most specialized common supertype of the exceptions listed. There is a nice feature where if you rethrow ex in the catch, the compiler knows that only one of the listed exceptions can be thrown.

Java 6 and earlier

Prior to Java 7, there are ways to handle this problem, but they tend to be inelegant, and to have limitations.

Approach #1

try {
     // stuff
} catch (Exception1 ex) {
     handleException(ex);
} catch (Exception2 ex) {
     handleException(ex);
}

public void handleException(SuperException ex) {
     // handle exception here
}

This gets messy if the exception handler needs to access local variables declared before the try. And if the handler method needs to rethrow the exception (and it is checked) then you run into serious problems with the signature. Specifically, handleException has to be declared as throwing SuperException ... which potentially means you have to change the signature of the enclosing method, and so on.

Approach #2

try {
     // stuff
} catch (SuperException ex) {
     if (ex instanceof Exception1 || ex instanceof Exception2) {
         // handle exception
     } else {
         throw ex;
     }
}

Once again, we have a potential problem with signatures.

Approach #3

try {
     // stuff
} catch (SuperException ex) {
     if (ex instanceof Exception1 || ex instanceof Exception2) {
         // handle exception
     }
}

If you leave out the else part (e.g. because there are no other subtypes of SuperException at the moment) the code becomes more fragile. If the exception hierarchy is reorganized, this handler without an else may end up silently eating exceptions!

I was trying to find a better answer that was more standalone, so I started to think about how JQuery does events and custom events. Since click (from JQuery) is just any event, I thought that all I had to do was trigger the event given that the iframe's content has been clicked on. Thus, this was my solution

$(document).ready(function () {
    $("iframe").each(function () {
        //Using closures to capture each one
        var iframe = $(this);
        iframe.on("load", function () { //Make sure it is fully loaded
            iframe.contents().click(function (event) {
                iframe.trigger("click");
            });
        });

        iframe.click(function () {
            //Handle what you need it to do
        });
    });
});

Instead of using a sheet name, in case you don't know or can't open the excel file to check in ubuntu (in my case, Python 3.6.7, ubuntu 18.04), I use the parameter index_col (index_col=0 for the first sheet)

import pandas as pd
file_name = 'some_data_file.xlsx' 
df = pd.read_excel(file_name, index_col=0)
print(df.head()) # print the first 5 rows

More obvious and simple, thread safe example:

#include <stdio.h>
#include <stdlib.h>
#include <string.h>

int main(int argc, char **argv)
{
    if (argc < 2){
        printf ("Dont' forget to pass arguments!\n");
        return(-1);
    }

    printf ("You have executed the program : %s\n", argv[0]);

    for(int i = 1; i < argc; i++){
        if(strcmp(argv[i],"--some_definite_parameter") == 0){
            printf("You have passed some definite parameter as an argument. And it is \"%s\".\n",argv[i]);
        }
        else if(strspn(argv[i], "0123456789") == strlen(argv[i])) {
            size_t big_digit = 0;
            sscanf(argv[i], "%zu%*c",&big_digit);
            printf("Your %d'nd argument contains only digits, and it is a number \"%zu\".\n",i,big_digit);
        }
        else if(strspn(argv[i], "0123456789abcdefghijklmnopqrstuvwxyz./") == strlen(argv[i]))
        {
            printf("%s - this string might contain digits, small letters and path symbols. It could be used for passing a file name or a path, for example.\n",argv[i]);
        }
        else if(strspn(argv[i], "ABCDEFGHIJKLMNOPQRSTUVWXYZ") == strlen(argv[i]))
        {
            printf("The string \"%s\" contains only capital letters.\n",argv[i]);
        }
    }
}

Yes, in 1980; in 2008? depends

When I started programming professionally the speed dominance of Fortran was just being challenged. I remember reading about it in Dr. Dobbs and telling the older programmers about the article--they laughed.

So I have two views about this, theoretical and practical. In theory Fortran today has no intrinsic advantage to C/C++ or even any language that allows assembly code. In practice Fortran today still enjoys the benefits of legacy of a history and culture built around optimization of numerical code.

Up until and including Fortran 77, language design considerations had optimization as a main focus. Due to the state of compiler theory and technology, this often meant restricting features and capability in order to give the compiler the best shot at optimizing the code. A good analogy is to think of Fortran 77 as a professional race car that sacrifices features for speed. These days compilers have gotten better across all languages and features for programmer productivity are more valued. However, there are still places where the people are mainly concerned with speed in scientific computing; these people most likely have inherited code, training and culture from people who themselves were Fortran programmers.

When one starts talking about optimization of code there are many issues and the best way to get a feel for this is to lurk where people are whose job it is to have fast numerical code. But keep in mind that such critically sensitive code is usually a small fraction of the overall lines of code and very specialized: A lot of Fortran code is just as "inefficient" as a lot of other code in other languages and optimization should not even be a primary concern of such code.

A wonderful place to start in learning about the history and culture of Fortran is wikipedia. The Fortran Wikipedia entry is superb and I very much appreciate those who have taken the time and effort to make it of value for the Fortran community.

(A shortened version of this answer would have been a comment in the excellent thread started by Nils but I don't have the karma to do that. Actually, I probably wouldn't have written anything at all but for that this thread has actual information content and sharing as opposed to flame wars and language bigotry, which is my main experience with this subject. I was overwhelmed and had to share the love.)

If you don't want to install extra packages, ctypes can get the job done as well.

import ctypes

CF_TEXT = 1

kernel32 = ctypes.windll.kernel32
kernel32.GlobalLock.argtypes = [ctypes.c_void_p]
kernel32.GlobalLock.restype = ctypes.c_void_p
kernel32.GlobalUnlock.argtypes = [ctypes.c_void_p]
user32 = ctypes.windll.user32
user32.GetClipboardData.restype = ctypes.c_void_p

def get_clipboard_text():
    user32.OpenClipboard(0)
    try:
        if user32.IsClipboardFormatAvailable(CF_TEXT):
            data = user32.GetClipboardData(CF_TEXT)
            data_locked = kernel32.GlobalLock(data)
            text = ctypes.c_char_p(data_locked)
            value = text.value
            kernel32.GlobalUnlock(data_locked)
            return value
    finally:
        user32.CloseClipboard()

print(get_clipboard_text())

for ( i = 0; i < total.length; i++ ); // remove this
{
    if (total[i]!=0)
        System.out.println( "Letter" + (char)( 'a' + i) + " count =" + total[i]);
}

The for loop loops until i=26 (where 26 is total.length) and then your if is executed, going over the bounds of the array. Remove the ; at the end of the for loop.

You can set the line-height in pixels instead of percentage. Is that what you mean?

You can try:

void CopyInt(int value, char* buffer) {
  memcpy(buffer, (void*)value, sizeof(int));
}

I finally found the way to do what the OP wanted. It's as simple as:

git log --graph [branchname]

The command will display all commits that are reachable from the provided branch in the format of graph. But, you can easily filter all commits on that branch by looking at the commits graph whose * is the first character in the commit line.

For example, let's look at the excerpt of git log --graph master on cakephp GitHub repo below:

D:\Web Folder\cakephp>git log --graph master
*   commit 8314c2ff833280bbc7102cb6d4fcf62240cd3ac4
|\  Merge: c3f45e8 0459a35
| | Author: José Lorenzo Rodríguez <[email protected]>
| | Date:   Tue Aug 30 08:01:59 2016 +0200
| |
| |     Merge pull request #9367 from cakephp/fewer-allocations
| |
| |     Do fewer allocations for simple default values.
| |
| * commit 0459a35689fec80bd8dca41e31d244a126d9e15e
| | Author: Mark Story <[email protected]>
| | Date:   Mon Aug 29 22:21:16 2016 -0400
| |
| |     The action should only be defaulted when there are no patterns
| |
| |     Only default the action name when there is no default & no pattern
| |     defined.
| |
| * commit 80c123b9dbd1c1b3301ec1270adc6c07824aeb5c
| | Author: Mark Story <[email protected]>
| | Date:   Sun Aug 28 22:35:20 2016 -0400
| |
| |     Do fewer allocations for simple default values.
| |
| |     Don't allocate arrays when we are only assigning a single array key
| |     value.
| |
* |   commit c3f45e811e4b49fe27624b57c3eb8f4721a4323b
|\ \  Merge: 10e5734 43178fd
| |/  Author: Mark Story <[email protected]>
|/|   Date:   Mon Aug 29 22:15:30 2016 -0400
| |
| |       Merge pull request #9322 from cakephp/add-email-assertions
| |
| |       Add email assertions trait
| |
| * commit 43178fd55d7ef9a42706279fa275bb783063cf34
| | Author: Jad Bitar <[email protected]>
| | Date:   Mon Aug 29 17:43:29 2016 -0400
| |
| |     Fix `@since` in new files docblocks
| |

As you can see, only commits 8314c2ff833280bbc7102cb6d4fcf62240cd3ac4 and c3f45e811e4b49fe27624b57c3eb8f4721a4323b have the * being the first character in the commit lines. Those commits are from the master branch while the other four are from some other branches.

I had the same error message, but in my case, nothing above didn't fix the problem. The solution was in "label". You need to add 'mat-label' and to put your input inside 'label' tags also. Solution of my problem is in the snippet below:

  <mat-label>
     Username
  </mat-label>
  <label>
    <input 
       matInput 
       type="text" 
       placeholder="Your username" 
       formControlName="username"/>
  </label>

You Can use Linq by Name Grouping

  var allEntries = from r in dt.AsEnumerable()
                            select r["Amount"];

using name space using System.Linq;

You can find the sample total,subtotal,grand total in datatable using c# at Myblog

UICollectionView is same as UITableView but it gives us the additional functionality of simply creating a grid view, which is a bit problematic in UITableView. It will be a very long post I mention a link from where you will get everything in simple steps.

NB.: Now instead of

runProguard false

you'll need to use

minifyEnabled false

would this work?

cat requirements.txt | while read x; do conda install "$x" -p ./lib ;done

or

conda install --file requirements.txt -p ./lib

What about a rectangle? That's got to be more efficient than creating an ImageData object.

Python suggests users use len() instead of __len__() for consistency, just like other guys said. However, There're some other benefits:

For some built-in types like list, str, bytearray and so on, the Cython implementation of len() takes a shortcut. It directly returns the ob_size in a C structure, which is faster than calling __len__().

If you are interested in such details, you could read the book called "Fluent Python" by Luciano Ramalho. There're many interesting details in it, and may help you understand Python more deeply.

Most of you already know this by now, but I am posting this, just incase, some of you are still struggling with JSON in iOS6+.

In iOS6 and later, we have the NSJSONSerialization Class that is fast and has no dependency on including "outside" libraries.

NSDictionary *result = [NSJSONSerialization JSONObjectWithData:[resultStr dataUsingEncoding:NSUTF8StringEncoding] options:0 error:nil]; 

This is the way iOS6 and later can now parse JSON efficiently.The use of SBJson is also pre-ARC implementation and brings with it those issues too if you are working in an ARC environment.

I hope this helps!

It depends if you consider if a subclass of a given class is equals to its parent.

class LastName
{
(...)
}


class FamilyName
extends LastName
{
(..)
}

here I would use 'instanceof', because I want a LastName to be compared to FamilyName

class Organism
{
}

class Gorilla extends Organism
{
}

here I would use 'getClass', because the class already says that the two instances are not equivalent.

Have been edited in 2020-06-15

public class Outer {

    public Inner getInner(){
        return new Inner(this);
    }

    static class Inner {

        public final Outer Outer;

        public Inner(Outer outer) {
            this.Outer=outer;
        }
    }

    public static void main(String[] args) {
        Outer outer = new Outer();
        Inner inner = outer.getInner();
        Outer anotherOuter=inner.Outer;

        if(anotherOuter == outer) {
            System.out.println("Was able to reach out to the outer object via inner !!");
        } else {
            System.out.println("No luck :-( ");
        }
    }
}

try Parsing and Formatting

Take an example Parsing

String input = ...;
try {
    DateTimeFormatter formatter =
                      DateTimeFormatter.ofPattern("MMM d yyyy");
    LocalDate date = LocalDate.parse(input, formatter);
    System.out.printf("%s%n", date);
}
catch (DateTimeParseException exc) {
    System.out.printf("%s is not parsable!%n", input);
    throw exc;      // Rethrow the exception.
}

Formatting

ZoneId leavingZone = ...;
ZonedDateTime departure = ...;

try {
    DateTimeFormatter format = DateTimeFormatter.ofPattern("MMM d yyyy  hh:mm a");
    String out = departure.format(format);
    System.out.printf("LEAVING:  %s (%s)%n", out, leavingZone);
}
catch (DateTimeException exc) {
    System.out.printf("%s can't be formatted!%n", departure);
    throw exc;
}

The output for this example, which prints both the arrival and departure time, is as follows:

LEAVING:  Jul 20 2013  07:30 PM (America/Los_Angeles)
ARRIVING: Jul 21 2013  10:20 PM (Asia/Tokyo)

For more details check this page- https://docs.oracle.com/javase/tutorial/datetime/iso/format.html

ls -X works for that purpose, in case you have aliased ls to a more useful default.

Yes, that is safe and recommended.

The only caveat from the page you referred is that you can't be modifying configuration of the mapper once it is shared; but you are not changing configuration so that is fine. If you did need to change configuration, you would do that from the static block and it would be fine as well.

EDIT: (2013/10)

With 2.0 and above, above can be augmented by noting that there is an even better way: use ObjectWriter and ObjectReader objects, which can be constructed by ObjectMapper. They are fully immutable, thread-safe, meaning that it is not even theoretically possible to cause thread-safety issues (which can occur with ObjectMapper if code tries to re-configure instance).

None of the above things worked for me as I had multiple recipients both in 'to' and 'cc'. So I tried like below:

recipients = ['[email protected]', '[email protected]']
cc_recipients = ['[email protected]', '[email protected]']
MESSAGE['To'] = ", ".join(recipients)
MESSAGE['Cc'] = ", ".join(cc_recipients)

and extend the 'recipients' with 'cc_recipients' and send mail in trivial way

recipients.extend(cc_recipients)
server.sendmail(FROM,recipients,MESSAGE.as_string())

An "if" is not a loop. Just use the break inside the "if" and it will break out of the "while".

If you ever need to use genuine nested loops, Java has the concept of a labeled break. You can put a label before a loop, and then use the name of the label is the argument to break. It will break outside of the labeled loop.

matches(); does not buffer, but find() buffers. find() searches to the end of the string first, indexes the result, and return the boolean value and corresponding index.

That is why when you have a code like

1:Pattern.compile("[a-z]");

2:Pattern.matcher("0a1b1c3d4");

3:int count = 0;

4:while(matcher.find()){

5:count++: }

At 4: The regex engine using the pattern structure will read through the whole of your code (index to index as specified by the regex[single character] to find at least one match. If such match is found, it will be indexed then the loop will execute based on the indexed result else if it didn't do ahead calculation like which matches(); does not. The while statement would never execute since the first character of the matched string is not an alphabet.

system_profiler SPUSBDataType

it your need command on macos

FindIndex Extension

static class ArrayExtensions
{
    public static int FindIndex<T>(this T[] array, Predicate<T> match)
    {
        return Array.FindIndex(array, match);
    }
}

Usage

int[] array = { 9,8,7,6,5 };

var index = array.FindIndex(i => i == 7);

Console.WriteLine(index); // Prints "2"

Here's a fiddle with it.

Bonus: IndexOf Extension

I wrote this first not reading the question properly...

static class ArrayExtensions
{
    public static int IndexOf<T>(this T[] array, T value)
    {
        return Array.IndexOf(array, value);
    }   
}

Usage

int[] array = { 9,8,7,6,5 };

var index = array.IndexOf(7);

Console.WriteLine(index); // Prints "2"

Here's a fiddle with it.

If you only ever want to move one item from an arbitrary position to the end of the array, this should work:

function toEnd(list, position) {
    list.push(list.splice(position, 1));
    return list;
}

If you want to move multiple items from some arbitrary position to the end, you can do:

function toEnd(list, from, count) {
    list.push.apply(list, list.splice(from, count));
    return list;
}

If you want to move multiple items from some arbitrary position to some arbitrary position, try:

function move(list, from, count, to) {
    var args = [from > to ? to : to - count, 0];
    args.push.apply(args, list.splice(from, count));
    list.splice.apply(list, args);

    return list;
}

This is the reason why mkv is such a good container, especially now that it's mature:

mkvmerge -o output.mkv video.mp4 subtitle.srt

In order to show the icon, use getSupportActionBar().setIcon(R.xxx.xxx)

In my case the code is:-

getSupportActionBar().setIcon (R.mipmap.ic_launcher);

The problem here is that the "on" is applied to all elements that exists AT THE TIME. When you create an element dynamically, you need to run the on again:

$('form').on('submit',doFormStuff);

createNewForm();

// re-attach to all forms
$('form').off('submit').on('submit',doFormStuff);

Since forms usually have names or IDs, you can just attach to the new form as well. If I'm creating a lot of dynamic stuff, I'll include a setup or bind function:

function bindItems(){
    $('form').off('submit').on('submit',doFormStuff); 
    $('button').off('click').on('click',doButtonStuff);
}   

So then whenever you create something (buttons usually in my case), I just call bindItems to update everything on the page.

createNewButton();
bindItems();

I don't like using 'body' or document elements because with tabs and modals they tend to hang around and do things you don't expect. I always try to be as specific as possible unless its a simple 1 page project.

It's very simple. Just try:

start chrome https://www.google.co.in/

it will open the Google page in the Chrome browser.

If you wish to open the page in Firefox, try:

start firefox https://www.google.co.in/

Have Fun!

It can be done with CSS only, no javascript at all : running demo

1. Apply a custom HTML attribute, eg. data-tooltip="bla bla" to your object (div or whatever):

   <div data-tooltip="bla bla">
       something here
   </div>
   

2. Define the :before pseudoelement of each [data-tooltip] object to be transparent, absolutely positioned and with data-tooltip="" value as content:

   [data-tooltip]:before {            
       position : absolute;
        content : attr(data-tooltip);
        opacity : 0;
   }
   

3. Define :hover:before hovering state of each [data-tooltip] to make it visible:

   [data-tooltip]:hover:before {        
       opacity : 1;
   }
   

4. Apply your styles (color, size, position etc) to the tooltip object; end of the story.

In the demo I've defined another rule to specify if the tooltip must disappear when hovering over it but outside of the parent, with another custom attribute, data-tooltip-persistent, and a simple rule:

[data-tooltip]:not([data-tooltip-persistent]):before {
    pointer-events: none;
}

Note 1: The browser coverage for this is very wide, but consider using a javascript fallback (if needed) for old IE.

Note 2: an enhancement might be adding a bit of javascript to calculate the mouse position and add it to the pseudo elements, by changing a class applied to it.

If you prefer not to change applicationDidFinish, you can do the following trick:

Set Navigation controller as an initial view controller and assign to it a custom class 'MyNavigationController'. Then you can tweak its root view controller during viewDidLoad - it will override the root view controller that you set in your storyboard.

class MyNavigationController: UINavigationController {
    override func viewDidLoad() {
        super.viewDidLoad()
        if !isLoggedIn() {
            viewControllers = [R.storyboard.authentication.loginView()!]
        }
    }

    private func isLoggedIn() -> Bool {
        return false
    }

}

Edit this element is not recommended, but if you want to try it's like any other HTML element.

Edit example:

/* Edit select */
select {
    /* CSS style here */
}

/* Edit option */
option {
    /* CSS style here */
}

/* Edit selected option */
/* element  attr    attr value */
option[selected="selected"] {
    /* CSS style here */
}

<select>
    <option >Something #1</option>
    <option selected="selected">Something #2</option>
    <option >Something #3</option>
</select>

File.WriteAllText("path", String.Empty);

or

File.CreateText("path").Close();

in my case:: I was using kotlin extensions to access and bind my views, I had recently moved a view to another screen and forgot to remove its reference from the previous fragment that caused this error.

kotlin synthetic extensions are not compile time safe. I really loved this but apparently in big projects, if this happens again I'm surely going to get a heart attack.

For people getting the same error on stackblitz

You will find a Dependency tab on the left sidebar of the IDE. Just click the refresh button next to it and you will be good to go.

I've solved this error by this way.

$ch = curl_init ();
curl_setopt ( $ch, CURLOPT_URL, 'http://www.someurl/' );
curl_setopt ( $ch, CURLOPT_TIMEOUT, 30);
ob_start();
$response = curl_exec ( $ch );
$data = ob_get_clean();
if(curl_getinfo($ch, CURLINFO_HTTP_CODE) == 200 ) success;

Error still occurs, but I can handle response data in variable.

enums are fine. IIRC, one item in effective Java (2nd Ed) has enum constants enumerating standard options implementing a [Java keyword] interface for any value.

My preference is to use a [Java keyword] interface over a final class for constants. You implicitly get the public static final. Some people will argue that an interface allows bad programmers to implement it, but bad programmers are going to write code that sucks no matter what you do.

Which looks better?

public final class SomeStuff {
     private SomeStuff() {
         throw new Error();
     }
     public static final String SOME_CONST = "Some value or another, I don't know.";
}

Or:

public interface SomeStuff {
     String SOME_CONST = "Some value or another, I don't know.";
}

In my case there was a race, as I needed the ajax response to fill a hidden field and send the form after it's filled. I fixed it with putting e.preventDefault() into a condition.

var all_is_done=false;
$("form").submit(function(e){
  if(all_is_done==false){
   e.preventDefault();
   do_the_stuff();
  }
});
function do_the_stuf(){
  //do stuff
  all_is_done=true;
  $("form").submit();
}

Beside all the above hints like track by and smaller loops, this one also helped me a lot

<span ng-bind="::stock.name"></span>

this piece of code would print the name once it has been loaded, and stop watching it after that. Similarly, for ng-repeats, it could be used as

<div ng-repeat="stock in ::ctrl.stocks">{{::stock.name}}</div>

however it only works for AngularJS version 1.3 and higher. From http://www.befundoo.com/blog/optimizing-ng-repeat-in-angularjs/

When I ran into this problem, it was a result of trying to use an inner class to serve as the DO. Construction of the inner class (silently) required an instance of the enclosing class -- which wasn't available to Jackson.

In this case, moving the inner class to its own .java file fixed the problem.

Installing psqlODBC on 64bit Windows

Though you can install 32 bit ODBC drivers on Win X64 as usual, you can't configure 32-bit DSNs via ordinary control panel or ODBC datasource administrator.

How to configure 32 bit ODBC drivers on Win x64

Configure ODBC DSN from %SystemRoot%\syswow64\odbcad32.exe

1. Start > Run
2. Enter: %SystemRoot%\syswow64\odbcad32.exe
3. Hit return.
4. Open up ODBC and select under the System DSN tab.
5. Select PostgreSQL Unicode

You may have to play with it and try different scenarios, think outside-the-box, remember this is open source.

See here for starting the service and here for how to make it permanent. In short to test it, open a "DOS" terminal with administrator privileges and write:

shell> "C:\Program Files\MySQL\[YOUR MYSQL VERSION PATH]\bin\mysqld"

Detection is automatic. You must specify what css can be used for each screen resolution:

/* for all screens, use 14px font size */
body {  
    font-size: 14px;    
}
/* responsive, form small screens, use 13px font size */
@media (max-width: 479px) {
    body {
        font-size: 13px;
    }
}

In Short -> You must enable VT-x Technology in your BIOS.

Here are the detailed steps:

1- Restore Optimized Defaults (Not Necessary)//Steps to start BIOS

Its better to restore Optimized Defaults before, But following steps are not necessary:

1. Reboot the computer and open the system's BIOS menu. This can usually be done by pressing the delete key, the F1 key or Alt and F4 keys depending on the system.

2. Select Restore Defaults or Restore Optimized Defaults, and then select Save & Exit.

2- Enable VT-x Technology in BIOS (Necessary)

1. Power on/Reboot the machine and open the BIOS (as per Step 1).

2. Open the Processor submenu The processor settings menu may be hidden in the Chipset, Advanced CPU Configuration or Northbridge.

3. Enable Intel Virtualization Technology (also known as Intel VT-x) or AMD-V depending on the brand of the processor. The virtualization extensions may be labelled Virtualization Extensions, Vanderpool or various other names depending on the OEM and system BIOS.

4. Select Save & Exit.

Note: Many of the steps above may vary depending on your motherboard, processor type, chipset and OEM. Refer to your system's accompanying documentation for the correct information on configuring your system.

Test:

Run cat /proc/cpuinfo | grep vmx svm. If the command outputs, the virtualization extensions are now enabled. If there is no output your system may not have the virtualization extensions or the correct BIOS setting enabled.

Detailed instructions can be found Here

You can do it like this:

DataTable dt = new DataTable("MyTable");

foreach (DataRow row in dt.Rows)
{
    foreach (DataColumn column in dt.Columns)
    {
        if (row[column] != null) // This will check the null values also (if you want to check).
        {
               // Do whatever you want.
        }
     }
}

In Python, curly braces are used to define a dictionary.

a={'one':1, 'two':2, 'three':3}
a['one']=1
a['three']=3

In other languages, { } are used as part of the flow control. Python however used indentation as its flow control because of its focus on readable code.

for entry in entries:
     code....

There's a little easter egg in Python when it comes to braces. Try running this on the Python Shell and enjoy.

from __future__ import braces

   function callServlet()


{
 document.getElementById("adminForm").action="./Administrator";
 document.getElementById("adminForm").method = "GET";
 document.getElementById("adminForm").submit();

}

<button type="submit"  onclick="callServlet()" align="center"> Register</button>

Uncaught TypeError: undefined is not a function example_app.js:7

This error message tells the whole story. On this line, you are trying to execute a function. However, whatever is being executed is not a function! Instead, it's undefined.

So what's on example_app.js line 7? Looks like this:

var tasks = new ExampleApp.Collections.Tasks(data.tasks);

There is only one function being run on that line. We found the problem! ExampleApp.Collections.Tasks is undefined.

So lets look at where that is declared:

var Tasks = Backbone.Collection.extend({
    model: Task,
    url: '/tasks'
});

If that's all the code for this collection, then the root cause is right here. You assign the constructor to global variable, called Tasks. But you never add it to the ExampleApp.Collections object, a place you later expect it to be.

Change that to this, and I bet you'd be good.

ExampleApp.Collections.Tasks = Backbone.Collection.extend({
    model: Task,
    url: '/tasks'
});

See how important the proper names and line numbers are in figuring this out? Never ever regard errors as binary (it works or it doesn't). Instead read the error, in most cases the error message itself gives you the critical clues you need to trace through to find the real issue.

In Javascript, when you execute a function, it's evaluated like:

expression.that('returns').aFunctionObject(); // js
execute -> expression.that('returns').aFunctionObject // what the JS engine does

That expression can be complex. So when you see undefined is not a function it means that expression did not return a function object. So you have to figure out why what you are trying to execute isn't a function.

And in this case, it was because you didn't put something where you thought you did.

Populate the text box values in the Page Init event as opposed to using the Postback.

protected void Page_Init(object sender, EventArgs e)
{
    DropDownTitle();
}

In my case, I added Lucid extension to Chrome and didn't notice the problem at that moment. After about a day of working on the problem and turning the program upside down, in a post someone had mentioned Lucid. I remembered what I had done and removed the extension from Chrome and ran the program again. The problem was gone. I am working with React. I thought this might help.

We also encountered similar problems. However, setting the charset as noted in the previous comment did not help. Our application was making an AJAX request every 60 seconds and our webserver, nginx, was sending Keep-Alive timeout at 60 seconds.

We fixed the problem by setting the keep-alive timeout value to 75 seconds.

This is what we believe was happening:

1. IE makes an AJAX request every 60 seconds, setting Keep-Alive in the request.
2. At the same time, nginx knows that the Keep-Alive timeout value is ignored by IE, so it starts the TCP connection close process (in the case of FF/Chrome this is started by the client)
3. IE receives the close connection request for the previously sent request. Since this is not expected by IE, it throws an error and aborts.
4. nginx still seems to be responding to the request even though the connection is closed.

A Wireshark TCP dump would provide more clarity, our problem is fixed and we do not wish to spend more time on it.

While I am no Objective-C expert, I personally just define the method in the implementation of my class. Granted, it must be defined before (above) any methods calling it, but it definitely takes the least amount of work to do.

TextBox tbx = this.Controls.Find("textBox1", true).FirstOrDefault() as TextBox;
tbx.Text = "found!";

If Controls.Find is not found "textBox1" => error. You must add code.

If(tbx != null)

Edit:

TextBox tbx = this.Controls.Find("textBox1", true).FirstOrDefault() as TextBox;
If(tbx != null)
   tbx.Text = "found!";

I guess this could help, adding this before any tag of javascript:

try{
  console
}catch(e){
   console={}; console.log = function(){};
}

PowerShell (Core-compatible) one-liner to ease copypaste scenarios:

netstat -aon | Select-String 8080 | ForEach-Object { $_ -replace '\s+', ',' } | ConvertFrom-Csv -Header @('Empty', 'Protocol', 'AddressLocal', 'AddressForeign', 'State', 'PID') | ForEach-Object { $portProcess = Get-Process | Where-Object Id -eq $_.PID; $_ | Add-Member -NotePropertyName 'ProcessName' -NotePropertyValue $portProcess.ProcessName; Write-Output $_ } | Sort-Object ProcessName, State, Protocol, AddressLocal, AddressForeign | Select-Object  ProcessName, State, Protocol, AddressLocal, AddressForeign | Format-Table

Output:

ProcessName State     Protocol AddressLocal AddressForeign
----------- -----     -------- ------------ --------------
System      LISTENING TCP      [::]:8080    [::]:0
System      LISTENING TCP      0.0.0.0:8080 0.0.0.0:0

Same code, developer-friendly:

$Port = 8080

# Get PID's listening to $Port, as PSObject
$PidsAtPortString = netstat -aon `
  | Select-String $Port
$PidsAtPort = $PidsAtPortString `
  | ForEach-Object { `
      $_ -replace '\s+', ',' `
  } `
  | ConvertFrom-Csv -Header @('Empty', 'Protocol', 'AddressLocal', 'AddressForeign', 'State', 'PID')

# Enrich port's list with ProcessName data
$ProcessesAtPort = $PidsAtPort `
  | ForEach-Object { `
    $portProcess = Get-Process `
      | Where-Object Id -eq $_.PID; `
    $_ | Add-Member -NotePropertyName 'ProcessName' -NotePropertyValue $portProcess.ProcessName; `
    Write-Output $_;
  }

# Show output
$ProcessesAtPort `
  | Sort-Object    ProcessName, State, Protocol, AddressLocal, AddressForeign `
  | Select-Object  ProcessName, State, Protocol, AddressLocal, AddressForeign `
  | Format-Table

If you simply want to go to another page, then what you might need is a link that looks like a button with a href like so:

<a href="/#/somepage.html" class="button">Back to Listings</a>

Hope this helps.

You cannot color plain text in a GitHub README.md file. You can however add color to code samples with the tags below.

To do this just add tags such as these samples to your README.md file:

```json
   // code for coloring
```
```html
   // code for coloring
```
```js
   // code for coloring
```
```css
   // code for coloring
```
// etc.

No "pre" or "code" tags needed.

This is covered in the GitHub Markdown documentation (about half way down the page, there's an example using Ruby). GitHub uses Linguist to identify and highlight syntax - you can find a full list of supported languages (as well as their markdown keywords) over in the Linguist's YAML file.

int(n**0.5) is the floor value of sqrt(n) which you confused with power 2 of n (n**2). If n is not prime, there must be two numbers 1 < i <= j < n such that: i * j = n.

Now, since sqrt(n) * sqrt(n) = n assuming one of i,j is bigger than (or equals to) sqrt(n) - it means that the other one has to be smaller than (or equals to) sqrt(n).

Since that is the case, it's good enough to iterate the integer numbers in the range [2, sqrt(n)]. And that's exactly what the code that was posted is doing.

If you want to come out as a real smartass, use the following one-liner function:

import re
def is_prime(n):    
    return not re.match(r'^1?$|^(11+?)\1+$',n*'1')

An explanation for the "magic regex" can be found here

You can do it in 2 ways that I am aware of.

1- <MyComponent text={<p>This is <strong>not</strong> working.</p>} />

And then do this

class MyComponent extends React.Component {
   render () {
     return (<div>{this.props.text}</div>)
   }
}

Or second approach do it like this

2- <MyComponent><p>This is <strong>not</strong> working.</p><MyComponent/>

And then do this

class MyComponent extends React.Component {
   render () {
     return (<div>{this.props.children}</div>)
   }
}

The most effective method is list comprehension, many people show their case, of course, it is also a good way to get an iterator through filter.

Filter receives a function and a sequence. Filter applies the passed function to each element in turn, and then decides whether to retain or discard the element depending on whether the function return value is True or False.

There is an example (get the odds in the tuple):

list(filter(lambda x:x%2==1, (1, 2, 4, 5, 6, 9, 10, 15)))  
# result: [1, 5, 9, 15]

Caution: You can also not handle iterators. Iterators are sometimes better than sequences.

The reason could be the firewall modification as you are under a network.(In which case they may deliberately block some ports)
To double check if this is the reason ... do

ssh -T [email protected]

this should timeout. If that's the case use http protocol instead of ssh this way
just change your url in the config file to http.
Here is how :-

git config --local -e

change entry of

 url = [email protected]:username/repo.git

to

url = https://github.com/username/repo.git

For Vue 3:

This answer is based on MadisonTrash's great answer above but updated to use new Vue 3 syntax.

Vue 3 now uses beforeMount instead of bind, and unmounted instead of unbind (src).

const clickOutside = {
  beforeMount: (el, binding) => {
    el.clickOutsideEvent = event => {
      // here I check that click was outside the el and his children
      if (!(el == event.target || el.contains(event.target))) {
        // and if it did, call method provided in attribute value
        binding.value();
      }
    };
    document.addEventListener("click", el.clickOutsideEvent);
  },
  unmounted: el => {
    document.removeEventListener("click", el.clickOutsideEvent);
  },
};

createApp(App)
  .directive("click-outside", clickOutside)
  .mount("#app");

You should put your model class before create_all() call, like this:

from flask import Flask
from flask_sqlalchemy import SQLAlchemy

app = Flask(__name__)

app.config['SQLALCHEMY_DATABASE_URI'] = 'postgresql+psycopg2://login:pass@localhost/flask_app'
db = SQLAlchemy(app)

class User(db.Model):
    id = db.Column(db.Integer, primary_key=True)
    username = db.Column(db.String(80), unique=True)
    email = db.Column(db.String(120), unique=True)

    def __init__(self, username, email):
        self.username = username
        self.email = email

    def __repr__(self):
        return '<User %r>' % self.username

db.create_all()
db.session.commit()

admin = User('admin', '[email protected]')
guest = User('guest', '[email protected]')
db.session.add(admin)
db.session.add(guest)
db.session.commit()
users = User.query.all()
print users

If your models are declared in a separate module, import them before calling create_all().

Say, the User model is in a file called models.py,

from flask import Flask
from flask_sqlalchemy import SQLAlchemy

app = Flask(__name__)

app.config['SQLALCHEMY_DATABASE_URI'] = 'postgresql+psycopg2://login:pass@localhost/flask_app'
db = SQLAlchemy(app)

# See important note below
from models import User

db.create_all()
db.session.commit()

admin = User('admin', '[email protected]')
guest = User('guest', '[email protected]')
db.session.add(admin)
db.session.add(guest)
db.session.commit()
users = User.query.all()
print users

Important note: It is important that you import your models after initializing the db object since, in your models.py _you also need to import the db object from this module.

Wipe Data and restart the virtual device again fix the issue in my case.

To add to this - it seems important to define the width & height of the drawable as per this post:

• Drawable shape not showing when used in combination with android:drawableBottom attribute.

(his code works)

In a few words,

• In MVC, View has the UI part, which calls the controller which in turn calls the model & model in turn fires events back to view.
• In MVP, View contains UI and calls the presenter for implementation part. The presenter calls the view directly for updates to the UI part. Model which contains business logic is called by the presenter and no interaction whatsoever with the view. So here presenter does most of the work :)

echo 
"<div display='none'>
    <script type='text/javascript'>
        console.log('console log message');
    </script>
</div>";

Creates a

<div>

with the

display="none"

so that the div is not displayed, but the

console.log()

function is created in javascript. So you get the message in the console.

Pathlib can be used this way to get the directory containing current script :

import pathlib
filepath = pathlib.Path(__file__).resolve().parent

Invoking javap to read the bytecode

The javap command takes class-names without the .class extension. Try

javap -c ClassName

Converting .class files back to .java files

javap will however not give you the implementations of the methods in java-syntax. It will at most give it to you in JVM bytecode format.

To actually decompile (i.e., do the reverse of javac) you will have to use proper decompiler. See for instance the following related question:

• How do I "decompile" Java class files?

I know this has been already answered a long time ago but the answer didnt fix it for me but, I just removed everything from the sources in the buildpath settings and re-added them

I used JSONObject as shown below in Servlet.

    JSONObject jsonReturn = new JSONObject();

    NhAdminTree = AdminTasks.GetNeighborhoodTreeForNhAdministrator( connection, bwcon, userName);

    map = new HashMap<String, String>();
    map.put("Status", "Success");
    map.put("FailureReason", "None");
    map.put("DataElements", "2");

    jsonReturn = new JSONObject();
    jsonReturn.accumulate("Header", map);

    List<String> list = new ArrayList<String>();
    list.add(NhAdminTree);
    list.add(userName);

    jsonReturn.accumulate("Elements", list);

The Servlet returns this JSON object as shown below:

    response.setContentType("application/json");
    response.getWriter().write(jsonReturn.toString());

This Servlet is called from Browser using AngularJs as below

$scope.GetNeighborhoodTreeUsingPost = function(){
    alert("Clicked GetNeighborhoodTreeUsingPost : " + $scope.userName );

    $http({

        method: 'POST',
        url : 'http://localhost:8080/EPortal/xlEPortalService',
        headers: {
           'Content-Type': 'application/json'
         },
        data : {
            'action': 64,
            'userName' : $scope.userName
        }
    }).success(function(data, status, headers, config){
        alert("DATA.header.status : " + data.Header.Status);
        alert("DATA.header.FailureReason : " + data.Header.FailureReason);
        alert("DATA.header.DataElements : " + data.Header.DataElements);
        alert("DATA.elements : " + data.Elements);

    }).error(function(data, status, headers, config) {
        alert(data + " : " + status + " : " + headers + " : " + config);
    });

};

This code worked and it is showing correct data in alert dialog box:

Data.header.status : Success

Data.header.FailureReason : None

Data.header.DetailElements : 2

Data.Elements : Coma seperated string values i.e. NhAdminTree, userName

2015 Update: Folks, this is for very old versions of Android. See other answers for modern solutions!

To strike through the entire text view, you can use a specific background image to simulate the strikethrough effect:

android:background="@drawable/bg_strikethrough"

Where the bg_strikethrough drawable is a 9-patch that keeps a solid line through the middle, growing either side, with however much padding you think is reasonable. I've used one like this:

(enlarged for clarity.. 1300% !)

That is my HDPI version, so save it (the first one http://i.stack.imgur.com/nt6BK.png) as res/drawable-hdpi/bg_strikethrough.9.png and the configuration will work as so:

In English:

• ContentType: When sending data to the server, use this content type. Default is application/x-www-form-urlencoded; charset=UTF-8, which is fine for most cases.
• Accepts: The content type sent in the request header that tells the server what kind of response it will accept in return. Depends on DataType.
• DataType: The type of data that you're expecting back from the server. If none is specified, jQuery will try to infer it based on the MIME type of the response. Can be text, xml, html, script, json, jsonp.

Above answers are helpful, I'd just like to add an example that I think is demonstrating clearly what happens when we pass parameter without the ref keyword, even when that parameter is a reference type:

MyClass c = new MyClass(); c.MyProperty = "foo";

CNull(c); // only a copy of the reference is sent 
Console.WriteLine(c.MyProperty); // still foo, we only made the copy null
CPropertyChange(c); 
Console.WriteLine(c.MyProperty); // bar


private void CNull(MyClass c2)
        {          
            c2 = null;
        }
private void CPropertyChange(MyClass c2) 
        {
            c2.MyProperty = "bar"; // c2 is a copy, but it refers to the same object that c does (on heap) and modified property would appear on c.MyProperty as well.
        }

If you're not worried about a couple minutes time to do so, a solution would be to rm -rf node_modules and npm install again to rebuild the local modules.

So I finally got it(http://jsfiddle.net/ncapito/eYtU5/):

.centerWrapper:before {
    content:'';
    height: 100%;
    display: inline-block;
    vertical-align: middle;
}

.center {
    display:inline-block;
    vertical-align: middle;
}

<div class='row'>
    <div class='login-icon'>
        <div class='centerWrapper'>
            <div class='center'> <i class='icon-user'></i></div>
       </div>
    </div>
    <input type="text" placeholder="Email" />
 </div>

How to share image in android progamatically , Sometimes you wants to take a snapshot of your view and then like to share it so follow these steps: 1.Add permission to mainfest file

<uses-permission    
   android:name="android.permission.WRITE_EXTERNAL_STORAGE"/>

2.Very First take a screenshot of your view , for example it is Imageview, Textview, Framelayout,LinearLayout etc

For example you have an image view to take screenshot call this method in oncreate()

 ImageView image= (ImageView)findViewById(R.id.iv_answer_circle);
     ///take a creenshot
    screenShot(image);

after taking screenshot call share image method either on button
click or where you wants

shareBitmap(screenShot(image),"myimage");

After on create method define these two method ##

    public Bitmap screenShot(View view) {
    Bitmap bitmap = Bitmap.createBitmap(view.getWidth(),
            view.getHeight(), Config.ARGB_8888);
    Canvas canvas = new Canvas(bitmap);
    view.draw(canvas);
    return bitmap;
}

//////// this method share your image
private void shareBitmap (Bitmap bitmap,String fileName) {
    try {
        File file = new File(getContext().getCacheDir(), fileName + ".png");
        FileOutputStream fOut = new FileOutputStream(file);
        bitmap.compress(CompressFormat.PNG, 100, fOut);
        fOut.flush();
        fOut.close();
        file.setReadable(true, false);
        final Intent intent = new Intent(     android.content.Intent.ACTION_SEND);
        intent.setFlags(Intent.FLAG_ACTIVITY_NEW_TASK);
        intent.putExtra(Intent.EXTRA_STREAM, Uri.fromFile(file));
        intent.setType("image/png");
        startActivity(intent);
    } catch (Exception e) {
        e.printStackTrace();
    }

}

You are trying to set "++" on a jQuery element!

YOu could declare a js variable

var counter = 0;

and in jQuery code do:

$("#counter").html(counter++);

Note: Since someone claimed that the external link is dead in Sushant Butta's answer I've posted the content here as a separate answer.

Beware of NULLS.

Today I came across a very strange behaviour of query while using IN and NOT IN operators. Actually I wanted to compare two tables and find out whether a value from table b existed in table a or not and find out its behavior if the column containsnull values. So I just created an environment to test this behavior.

We will create table table_a.

SQL> create table table_a ( a number);
Table created.

We will create table table_b.

SQL> create table table_b ( b number);
Table created.

Insert some values into table_a.

SQL> insert into table_a values (1);
1 row created.

SQL> insert into table_a values (2);
1 row created.

SQL> insert into table_a values (3);
1 row created.

Insert some values into table_b.

SQL> insert into table_b values(4);
1 row created.

SQL> insert into table_b values(3);
1 row created.

Now we will execute a query to check the existence of a value in table_a by checking its value from table_b using IN operator.

SQL> select * from table_a where a in (select * from table_b);
         A
----------
         3

Execute below query to check the non existence.

SQL> select * from table_a where a not in (select * from table_b);
         A
----------
         1
         2

The output came as expected. Now we will insert a null value in the table table_b and see how the above two queries behave.

SQL> insert into table_b values(null);
1 row created.

SQL> select * from table_a where a in (select * from table_b);
         A
----------
         3

SQL> select * from table_a where a not in (select * from table_b);

no rows selected

The first query behaved as expected but what happened to the second query? Why didn't we get any output, what should have happened? Is there any difference in the query? No.

The change is in the data of table table_b. We have introduced a null value in the table. But how come it's behaving like this? Let's split the two queries into "AND" and "OR" operator.

First Query:

The first query will be handled internally something like this. So a null will not create a problem here as my first two operands will either evaluate to true or false. But my third operand a = null will neither evaluate to true nor false. It will evaluate to null only.

select * from table_a whara a = 3 or a = 4 or a = null;

a = 3  is either true or false
a = 4  is either true or false
a = null is null

Second Query:

The second query will be handled as below. Since we are using an "AND" operator and anything other than true in any of the operand will not give me any output.

select * from table_a whara a <> 3 and a <> 4 and a <> null;

a <> 3 is either true or false
a <> 4 is either true or false
a <> null is null

So how do we handle this? We will pick all the not null values from table table_b while using NOT IN operator.

SQL> select * from table_a where a not in (select * from table_b where b is not null);

         A
----------
         1
         2

So always be careful about NULL values in the column while using NOT IN operator.

Beware of NULL!!

myObj[prop] = value;

That should work. You mixed up the name of the variable and its value. But indexing an object with strings to get at its properties works fine in JavaScript.

Yes, you can set cookie in the AJAX request in the server-side code just as you'd do for a normal request since the server cannot differentiate between a normal request or an AJAX request.

AJAX requests are just a special way of requesting to server, the server will need to respond back as in any HTTP request. In the response of the request you can add cookies.

Office 2007

Right click the figure, select Insert Caption, Select Numbering, check box next to 'Include chapter number', select OK, Select OK again, then you figure identifier should be updated.

You can use a resource key like this:

<UserControl.Resources>
    <SolidColorBrush x:Key="{x:Static local:Foo.MyKey}">Blue</SolidColorBrush>
</UserControl.Resources>
<Grid Background="{StaticResource {x:Static local:Foo.MyKey}}" />

public partial class Foo : UserControl
{
    public Foo()
    {
        InitializeComponent();
        var brush = (SolidColorBrush)FindResource(MyKey);
    }

    public static ResourceKey MyKey { get; } = CreateResourceKey();

    private static ComponentResourceKey CreateResourceKey([CallerMemberName] string caller = null)
    {
        return new ComponentResourceKey(typeof(Foo), caller); ;
    }
}

If a class is declared as static then the variables and methods need to be declared as static.

A class can be declared static, indicating that it contains only static members. It is not possible to create instances of a static class using the new keyword. Static classes are loaded automatically by the .NET Framework common language runtime (CLR) when the program or namespace containing the class is loaded.

Use a static class to contain methods that are not associated with a particular object. For example, it is a common requirement to create a set of methods that do not act on instance data and are not associated to a specific object in your code. You could use a static class to hold those methods.

->The main features of a static class are:

• They only contain static members.
• They cannot be instantiated.
• They are sealed.
• They cannot contain Instance Constructors or simply constructors as we know that they are associated with objects and operates on data when an object is created.

Example

static class CollegeRegistration
{
  //All static member variables
   static int nCollegeId; //College Id will be same for all the students studying
   static string sCollegeName; //Name will be same
   static string sColegeAddress; //Address of the college will also same

    //Member functions
   public static int GetCollegeId()
   {
     nCollegeId = 100;
     return (nCollegeID);
   }
    //similarly implementation of others also.
} //class end


public class student
{
    int nRollNo;
    string sName;

    public GetRollNo()
    {
       nRollNo += 1;
       return (nRollNo);
    }
    //similarly ....
    public static void Main()
   {
     //Not required.
     //CollegeRegistration objCollReg= new CollegeRegistration();

     //<ClassName>.<MethodName>
     int cid= CollegeRegistration.GetCollegeId();
    string sname= CollegeRegistration.GetCollegeName();


   } //Main end
}

Example code:

class inside:
    def __init__(self):
        self.l = []

    def insert(self, element):
        self.l.append(element)


class outside:
    l = []             # static variable - the same for all instances

    def insert(self, element):
        self.l.append(element)


def main():
    x = inside()
    x.insert(8)
    print(x.l)      # [8]
    y = inside()
    print(y.l)      # []
    # ----------------------------
    x = outside()
    x.insert(8)
    print(x.l)      # [8]
    y = outside()
    print(y.l)      # [8]           # here is the difference


if __name__ == '__main__':
    main()

PhysicalAddressDictionary.TryGetValue

 public bool TryGetValue (
    PhysicalAddressKey key,
    out PhysicalAddressEntry physicalAddress
     )

Use the super keyword.

I use this:

//http://detectmobilebrowsers.com/ + tablets
(function(a) {
    if(/android|avantgo|bada\/|blackberry|blazer|compal|elaine|fennec|hiptop|iemobile|ip(ad|hone|od)|iris|kindle|lge |maemo|meego.+mobile|midp|mmp|netfront|opera m(ob|in)i|palm( os)?|phone|p(ixi|re)\/|plucker|pocket|psp|series(4|6)0|symbian|treo|up\.(browser|link)|vodafone|wap|windows (ce|phone)|xda|xiino|playbook|silk/i.test(a)
    ||
    /1207|6310|6590|3gso|4thp|50[1-6]i|770s|802s|a wa|abac|ac(er|oo|s\-)|ai(ko|rn)|al(av|ca|co)|amoi|an(ex|ny|yw)|aptu|ar(ch|go)|as(te|us)|attw|au(di|\-m|r |s )|avan|be(ck|ll|nq)|bi(lb|rd)|bl(ac|az)|br(e|v)w|bumb|bw\-(n|u)|c55\/|capi|ccwa|cdm\-|cell|chtm|cldc|cmd\-|co(mp|nd)|craw|da(it|ll|ng)|dbte|dc\-s|devi|dica|dmob|do(c|p)o|ds(12|\-d)|el(49|ai)|em(l2|ul)|er(ic|k0)|esl8|ez([4-7]0|os|wa|ze)|fetc|fly(\-|_)|g1 u|g560|gene|gf\-5|g\-mo|go(\.w|od)|gr(ad|un)|haie|hcit|hd\-(m|p|t)|hei\-|hi(pt|ta)|hp( i|ip)|hs\-c|ht(c(\-| |_|a|g|p|s|t)|tp)|hu(aw|tc)|i\-(20|go|ma)|i230|iac( |\-|\/)|ibro|idea|ig01|ikom|im1k|inno|ipaq|iris|ja(t|v)a|jbro|jemu|jigs|kddi|keji|kgt( |\/)|klon|kpt |kwc\-|kyo(c|k)|le(no|xi)|lg( g|\/(k|l|u)|50|54|\-[a-w])|libw|lynx|m1\-w|m3ga|m50\/|ma(te|ui|xo)|mc(01|21|ca)|m\-cr|me(di|rc|ri)|mi(o8|oa|ts)|mmef|mo(01|02|bi|de|do|t(\-| |o|v)|zz)|mt(50|p1|v )|mwbp|mywa|n10[0-2]|n20[2-3]|n30(0|2)|n50(0|2|5)|n7(0(0|1)|10)|ne((c|m)\-|on|tf|wf|wg|wt)|nok(6|i)|nzph|o2im|op(ti|wv)|oran|owg1|p800|pan(a|d|t)|pdxg|pg(13|\-([1-8]|c))|phil|pire|pl(ay|uc)|pn\-2|po(ck|rt|se)|prox|psio|pt\-g|qa\-a|qc(07|12|21|32|60|\-[2-7]|i\-)|qtek|r380|r600|raks|rim9|ro(ve|zo)|s55\/|sa(ge|ma|mm|ms|ny|va)|sc(01|h\-|oo|p\-)|sdk\/|se(c(\-|0|1)|47|mc|nd|ri)|sgh\-|shar|sie(\-|m)|sk\-0|sl(45|id)|sm(al|ar|b3|it|t5)|so(ft|ny)|sp(01|h\-|v\-|v )|sy(01|mb)|t2(18|50)|t6(00|10|18)|ta(gt|lk)|tcl\-|tdg\-|tel(i|m)|tim\-|t\-mo|to(pl|sh)|ts(70|m\-|m3|m5)|tx\-9|up(\.b|g1|si)|utst|v400|v750|veri|vi(rg|te)|vk(40|5[0-3]|\-v)|vm40|voda|vulc|vx(52|53|60|61|70|80|81|83|85|98)|w3c(\-| )|webc|whit|wi(g |nc|nw)|wmlb|wonu|x700|yas\-|your|zeto|zte\-/i.test(a.substr(0,4)))
    {
        window.location="yourNewIndex.html"
    }
})(navigator.userAgent||navigator.vendor||window.opera);

Because Intent has size limit . I use public static object to do pass bitmap from service to broadcast ....

public class ImageBox {
    public static Queue<Bitmap> mQ = new LinkedBlockingQueue<Bitmap>(); 
}

pass in my service

private void downloadFile(final String url){
        mExecutorService.submit(new Runnable() {
            @Override
            public void run() {
                Bitmap b = BitmapFromURL.getBitmapFromURL(url);
                synchronized (this){
                    TaskCount--;
                }
                Intent i = new Intent(ACTION_ON_GET_IMAGE);
                ImageBox.mQ.offer(b);
                sendBroadcast(i);
                if(TaskCount<=0)stopSelf();
            }
        });
    }

My BroadcastReceiver

private final BroadcastReceiver mReceiver = new BroadcastReceiver() {
        public void onReceive(Context context, Intent intent) {
            LOG.d(TAG, "BroadcastReceiver get broadcast");

            String action = intent.getAction();
            if (DownLoadImageService.ACTION_ON_GET_IMAGE.equals(action)) {
                Bitmap b = ImageBox.mQ.poll();
                if(b==null)return;
                if(mListener!=null)mListener.OnGetImage(b);
            }
        }
    };

I think this is only partially true. Changing the format seems to switch the date to a string object which then has no methods like AddDays to manipulate it. So to make this work, you have to switch it back to a date. For example:

Get-Date (Get-Date).AddDays(-1) -format D

I use the following utils method:

public static final void vibratePhone(Context context, short vibrateMilliSeconds) {
    Vibrator vibrator = (Vibrator) context.getSystemService(Context.VIBRATOR_SERVICE);
    vibrator.vibrate(vibrateMilliSeconds);
}

Add the following permission to the AndroidManifest file

<uses-permission android:name="android.permission.VIBRATE"/>

You can use overloaded methods in case if you wish to use different types of vibrations (patterns / indefinite) as suggested above.

in accord with Laravel documentation, I create in app/Http/Controllers/Auth/LoginController.php the following method :

protected function redirectTo()
{
    $user=Auth::user();

    if($user->account_type == 1){
        return '/admin';
    }else{
        return '/home';
    }

}

to get the user information from my db I used "Illuminate\Support\Facades\Auth;".

If you use Arch Linux (distributions like Manjaro or Antegros) simply type:

sudo pacman -S tk

And all will work perfectly!

    {{-- dynamic select/dropdown --}}
    <select class="form-control m-bot15" name="district_id" 
        onchange ="location = this.options[this.selectedIndex].value;"
        >
          <option value="">--Select--</option>
          <option value="?">All</option>

            @foreach($location as $district)
                <option  value="?district_id={{ $district->district_id }}" >
                  {{ $district->district }}
                </option> 
            @endforeach   

    </select>

There is a web-based project for this that is relatively early on called Pongo. It requires installing Python and some dependencies, but it should run on Windows.

static void Main(string[] args)
{
    var prop = GetPropertyInfo<MyDto>(_ => _.MyProperty);

    MyDto dto = new MyDto();
    dto.MyProperty = 666;

    var value = prop.GetValue(dto);
    // value == 666
}

class MyDto
{
    public int MyProperty { get; set; }
}

public static PropertyInfo GetPropertyInfo<TSource>(Expression<Func<TSource, object>> propertyLambda)
{
    Type type = typeof(TSource);

    var member = propertyLambda.Body as MemberExpression;
    if (member == null)
    {
        var unary = propertyLambda.Body as UnaryExpression;
        if (unary != null)
        {
            member = unary.Operand as MemberExpression;
        }
    }
    if (member == null)
    {
        throw new ArgumentException(string.Format("Expression '{0}' refers to a method, not a property.",
            propertyLambda.ToString()));
    }

    var propInfo = member.Member as PropertyInfo;
    if (propInfo == null)
    {
        throw new ArgumentException(string.Format("Expression '{0}' refers to a field, not a property.",
            propertyLambda.ToString()));
    }

    if (type != propInfo.ReflectedType && !type.IsSubclassOf(propInfo.ReflectedType))
    {
        throw new ArgumentException(string.Format("Expression '{0}' refers to a property that is not from type {1}.",
            propertyLambda.ToString(), type));
    }

    return propInfo;
}

If you are open to vtd-xml, which excels at both performance and memory efficiency, below is the code to do what you are looking for...in both XPath and manual navigation... the overall code is much concise and easier to understand ...

import com.ximpleware.*;
public class queryText {
    public static void main(String[] s) throws VTDException{
        VTDGen vg = new VTDGen();
        if (!vg.parseFile("input.xml", true))
            return;
        VTDNav vn = vg.getNav();
        AutoPilot ap = new AutoPilot(vn);
        // first manually navigate
        if(vn.toElement(VTDNav.FC,"tag")){
            int i= vn.getText();
            if (i!=-1){
                System.out.println("text ===>"+vn.toString(i));
            }
            if (vn.toElement(VTDNav.NS,"tag")){
                i=vn.getText();
                System.out.println("text ===>"+vn.toString(i));
            }
        }

        // second version use XPath
        ap.selectXPath("/add/tag/text()");
        int i=0;
        while((i=ap.evalXPath())!= -1){
            System.out.println("text node ====>"+vn.toString(i));
        }
    }
}

The difference between the project operator (p) in relational algebra and the SELECT keyword in SQL is that if the resulting table/set has more than one occurrences of the same tuple, then p will return only one of them, while SQL SELECT will return all.

"dependencies": {
  "some-package": "github:github_username/some-package"
}

or just

"dependencies": {
  "some-package": "github_username/some-package"
}

https://docs.npmjs.com/files/package.json#github-urls

Have a look at this HTML5 rocks post - http://www.html5rocks.com/en/mobile/fullscreen/ basically you can use JS, or the Fullscreen API (better option IMO) or add some metadata to the head to indicate that the page is a webapp

Try to use pointers...

#include <stdio.h>
#include <string.h>

int main()
{

  char str[] = "String1 subString1 Strinstrnd subStr ing1subString";
  char sub[] = "subString";

  char *p1, *p2, *p3;
  int i=0,j=0,flag=0;

  p1 = str;
  p2 = sub;

  for(i = 0; i<strlen(str); i++)
  {
    if(*p1 == *p2)
      {
          p3 = p1;
          for(j = 0;j<strlen(sub);j++)
          {
            if(*p3 == *p2)
            {
              p3++;p2++;
            } 
            else
              break;
          }
          p2 = sub;
          if(j == strlen(sub))
          {
             flag = 1;
            printf("\nSubstring found at index : %d\n",i);
          }
      }
    p1++; 
  }
  if(flag==0)
  {
       printf("Substring NOT found");
  }
return (0);
}

frameLayout.addView(yourView); <----- if you are getting error on this line remove view from it's parent first

if (yourView.getParent() != null)

((ViewGroup) yourView.getParent()).removeView(yourView); frameLayout.addView(yourView); (Add view to layout)

Try setting a default value in the css (to let it know where you want it to start out)

CSS

position: relative;
transition: all 2s ease 0s;
top: 0; /* start out at position 0 */

Here is a short script which checks if the console is available. If it is not, it tries to load Firebug and if Firebug is not available it loads Firebug Lite. Now you can use console.log in any browser. Enjoy!

if (!window['console']) {

    // Enable console
    if (window['loadFirebugConsole']) {
        window.loadFirebugConsole();
    }
    else {
        // No console, use Firebug Lite
        var firebugLite = function(F, i, r, e, b, u, g, L, I, T, E) {
            if (F.getElementById(b))
                return;
            E = F[i+'NS']&&F.documentElement.namespaceURI;
            E = E ? F[i + 'NS'](E, 'script') : F[i]('script');
            E[r]('id', b);
            E[r]('src', I + g + T);
            E[r](b, u);
            (F[e]('head')[0] || F[e]('body')[0]).appendChild(E);
            E = new Image;
            E[r]('src', I + L);
        };
        firebugLite(
            document, 'createElement', 'setAttribute', 'getElementsByTagName',
            'FirebugLite', '4', 'firebug-lite.js',
            'releases/lite/latest/skin/xp/sprite.png',
            'https://getfirebug.com/', '#startOpened');
    }
}
else {
    // Console is already available, no action needed.
}

Rename the Column by doing the following:

dataTable.Columns["ColumnName"].ColumnName = "newColumnName";

It's incorrect, but you can try this instead:

select
    a.x,
    ( select b.y from b where b.v = a.v) as by,
    ( select b.z from b where b.v = a.v) as bz
from a

you can also use subquery in join

 select
        a.x,
        b.y,
        b.z
    from a
    left join (select y,z from b where ... ) b on b.v = a.v

or

   select
        a.x,
        b.y,
        b.z
    from a
    left join b on b.v = a.v

Cross browser window.load event

function load(){}

window[ addEventListener ? 'addEventListener' : 'attachEvent' ]( addEventListener ? 'load' : 'onload', load )

<button onclick="history.go(-1);">Back </button>

If you have a for loop such as the one below.

Change @item.StartDate to @item.StartDate.Value.ToShortDateString()

This will remove the time just in case you can't annotate your property in the model like in my case.

<table>
  <tr>
   <th>Type</th>
   <th>Start Date</th>
  </tr>
    @foreach (var item in Model.TestList) {
      <tr>
        <td>@item.TypeName</td>
        <td>@item.StartDate.Value.ToShortDateString()</td>
      </tr>
      }
</table>

here is the solution for similar problem which i was facing while extracting name from user profile facebook json object

$uname=json_encode($userprof);
$uname=json_decode($uname);
echo "Welcome " . $uname -> name  ;

Create a dictionary, then iterate over the result and stuff the rows in the dictionary. Note that if you encounter a row with a duplicate date, you will have to decide what to do (raise an exception, replace the previous row, discard the later row, etc...)

Here's test.csv:

Date,Foo,Bar
123,456,789
abc,def,ghi

and the corresponding program:

import csv
reader = csv.reader(open('test.csv'))

result = {}
for row in reader:
    key = row[0]
    if key in result:
        # implement your duplicate row handling here
        pass
    result[key] = row[1:]
print(result)

yields:

{'Date': ['Foo', 'Bar'], '123': ['456', '789'], 'abc': ['def', 'ghi']}

or, with DictReader:

import csv
reader = csv.DictReader(open('test.csv'))

result = {}
for row in reader:
    key = row.pop('Date')
    if key in result:
        # implement your duplicate row handling here
        pass
    result[key] = row
print(result)

results in:

{'123': {'Foo': '456', 'Bar': '789'}, 'abc': {'Foo': 'def', 'Bar': 'ghi'}}

Or perhaps you want to map the column headings to a list of values for that column:

import csv
reader = csv.DictReader(open('test.csv'))

result = {}
for row in reader:
    for column, value in row.items():  # consider .iteritems() for Python 2
        result.setdefault(column, []).append(value)
print(result)

That yields:

{'Date': ['123', 'abc'], 'Foo': ['456', 'def'], 'Bar': ['789', 'ghi']}