html, body{
width:100%;
}
This tells the html to be 100% wide. But 100% refers to the whole browser window width, so no more than that.
You may want to set a min width instead.
html, body{
min-width:100%;
}
So it will be 100% as a minimum, bot more if needed.
Set the containing element/div to a height. Otherwise your asking the browser to set the height to 100% of an unknown value and it can't.
More info here: http://webdesign.about.com/od/csstutorials/f/set-css-height-100-percent.htm
?legend
will tell you:
Arguments
x
, y
the x
and y
co-ordinates to be used to position the legend. They can be specified by keyword or in any way which is accepted by xy.coords
: See ‘Details’.
Details:
Arguments x
, y
, legend are interpreted in a non-standard way to allow the coordinates to be specified via one or two arguments. If legend is missing and y
is not numeric, it is assumed that the second argument is intended to be legend and that the first argument specifies the coordinates.
The coordinates can be specified in any way which is accepted by xy.coords
. If this gives the coordinates of one point, it is used as the top-left coordinate of the rectangle containing the legend. If it gives the coordinates of two points, these specify opposite corners of the rectangle (either pair of corners, in any order).
The location may also be specified by setting x
to a single keyword from the list bottomright
, bottom
, bottomleft
, left
, topleft
, top
, topright
, right
and center
. This places the legend on the inside of the plot frame at the given location. Partial argument matching is used. The optional inset argument specifies how far the legend is inset from the plot margins. If a single value is given, it is used for both margins; if two values are given, the first is used for x- distance, the second for y-distance.
If any one is interested here is what query is executed by psql
on postgres 9.1:
SELECT n.nspname as "Schema",
p.proname as "Name",
pg_catalog.pg_get_function_result(p.oid) as "Result data type",
pg_catalog.pg_get_function_arguments(p.oid) as "Argument data types",
CASE
WHEN p.proisagg THEN 'agg'
WHEN p.proiswindow THEN 'window'
WHEN p.prorettype = 'pg_catalog.trigger'::pg_catalog.regtype THEN 'trigger'
ELSE 'normal'
END as "Type"
FROM pg_catalog.pg_proc p
LEFT JOIN pg_catalog.pg_namespace n ON n.oid = p.pronamespace
WHERE pg_catalog.pg_function_is_visible(p.oid)
AND n.nspname <> 'pg_catalog'
AND n.nspname <> 'information_schema'
ORDER BY 1, 2, 4;
You can get what psql
runs for a backslash command by running psql
with the -E
flag.
This Link might be helpful for you.
Every time I've wanted a sleep in the middle of my function, I refactored to use a setTimeout().
I help develop the Colectica for Excel addin, which opens SPSS and Stata data files in Excel. This does not require ODBC configuration; it reads the file and then inserts the data and metadata into your worksheet.
The addin is downloadable from http://www.colectica.com/software/colecticaforexcel
self.navigationItem.leftBarButtonItem = self.navigationItem.backBarButtonItem;
Works for me. I used this when I had more tabs then could fit on the tab bar, and a view controller pushed from the "More" overrode the leftBarButtonItem in its viewDidLoad.
I have just solved the same issue upon setting up my Windows 8.1 PC. Exactly like @George Papatheodorou mentioned above (sorry I cannot add a comment), Eclipse and JRE must be both 64 bit or 32 bit.
However, it seems for Windows 8/8.1 environment, you are going to get 32-bit JRE by default (and I do not know where to change that default for the download), as explained here: http://java.com/en/download/faq/win8_faq.xml
I was using 64-bit Eclipse so there was a discrepancy. I then installed 32-bit Eclipse and everything works fine this time.
So before bothering changing any environment variables, check your JRE and Eclipse version.
Of course you can use 64-bit JRE with 64-bit Eclipse. Just make sure they match because Windows 8.1 will give you 32-bit by default.
Because the bootstrap-select is a bootstrap component and therefore you need to include it in your code as you did for your V3
NOTE: this component only works in boostrap-4 since version 1.13.0
$('select').selectpicker();
_x000D_
<link rel="stylesheet" href="https://stackpath.bootstrapcdn.com/bootstrap/4.1.1/css/bootstrap.min.css">_x000D_
<link rel="stylesheet" href="https://cdnjs.cloudflare.com/ajax/libs/bootstrap-select/1.13.1/css/bootstrap-select.css" />_x000D_
<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>_x000D_
<script src="https://stackpath.bootstrapcdn.com/bootstrap/4.1.1/js/bootstrap.bundle.min.js"></script>_x000D_
<script src="https://cdnjs.cloudflare.com/ajax/libs/bootstrap-select/1.13.1/js/bootstrap-select.min.js"></script>_x000D_
_x000D_
_x000D_
_x000D_
<select class="selectpicker" multiple data-live-search="true">_x000D_
<option>Mustard</option>_x000D_
<option>Ketchup</option>_x000D_
<option>Relish</option>_x000D_
</select>
_x000D_
First, you have to lookup the correct ArrayList
in the HashMap
:
ArrayList<String> myAList = theHashMap.get(courseID)
Then, add the new grade to the ArrayList
:
myAList.add(newGrade)
Related to the question, I ended up here when searching for:
How do I make a local repo aware of a changed default branch on GitHub
For completeness, adding the answer:
git remote set-head origin -a
Although using '@' is more appropriate than using '=' for your particular scenario, sometimes I use '=' so that I don't have to remember to use attrs.$observe():
<su-label tooltip="field.su_documentation">{{field.su_name}}</su-label>
Directive:
myApp.directive('suLabel', function() {
return {
restrict: 'E',
replace: true,
transclude: true,
scope: {
title: '=tooltip'
},
template: '<label><a href="#" rel="tooltip" title="{{title}}" data-placement="right" ng-transclude></a></label>',
link: function(scope, element, attrs) {
if (scope.title) {
element.addClass('tooltip-title');
}
},
}
});
With '=' we get two-way databinding, so care must be taken to ensure scope.title is not accidentally modified in the directive. The advantage is that during the linking phase, the local scope property (scope.title) is defined.
From the Java tutorial, you need to create a new font and register it in the graphics environment:
GraphicsEnvironment ge = GraphicsEnvironment.getLocalGraphicsEnvironment();
ge.registerFont(Font.createFont(Font.TRUETYPE_FONT, new File("A.ttf")));
After this step is done, the font is available in calls to getAvailableFontFamilyNames()
and can be used in font constructors.
Here is another possible workaround:
if exists (select * from master..sysservers where srvname = 'loopback')
exec sp_dropserver 'loopback'
go
exec sp_addlinkedserver @server = N'loopback', @srvproduct = N'', @provider = N'SQLOLEDB', @datasrc = @@servername
go
create function testit()
returns int
as
begin
declare @res int;
select @res=count(*) from openquery(loopback, 'exec sp_who');
return @res
end
go
select dbo.testit()
It's not so scary as xp_cmdshell
but also has too many implications for practical use.
Adding dependencies didn't fix the issue at my end.
The issue was happening at my end because of "additional" fields that are part of the "@Entity" class and don't exist in the database.
I removed the additional fields from the @Entity class and it worked.
The easiest way to strip all leading 0
s is:
var s = "00test";
s = s.replace(/^0+/, "");
If just stripping a single leading 0
character, as the question implies, you could use
s = s.replace(/^0/, "");
Simple way to get age as text is as below:
Select cast((DATEDIFF(m, date_of_birth, GETDATE())/12) as varchar) + ' Y & ' +
cast((DATEDIFF(m, date_of_birth, GETDATE())%12) as varchar) + ' M' as Age
Results Format will be:
**63 Y & 2 M**
function getMatches(string, regex, index) {_x000D_
index || (index = 1); // default to the first capturing group_x000D_
var matches = [];_x000D_
var match;_x000D_
while (match = regex.exec(string)) {_x000D_
matches.push(match[index]);_x000D_
}_x000D_
return matches;_x000D_
}_x000D_
_x000D_
_x000D_
// Example :_x000D_
var myString = 'Rs.200 is Debited to A/c ...2031 on 02-12-14 20:05:49 (Clear Bal Rs.66248.77) AT ATM. TollFree 1800223344 18001024455 (6am-10pm)';_x000D_
var myRegEx = /clear bal.+?(\d+\.?\d{2})/gi;_x000D_
_x000D_
// Get an array containing the first capturing group for every match_x000D_
var matches = getMatches(myString, myRegEx, 1);_x000D_
_x000D_
// Log results_x000D_
document.write(matches.length + ' matches found: ' + JSON.stringify(matches))_x000D_
console.log(matches);
_x000D_
function getMatches(string, regex, index) {_x000D_
index || (index = 1); // default to the first capturing group_x000D_
var matches = [];_x000D_
var match;_x000D_
while (match = regex.exec(string)) {_x000D_
matches.push(match[index]);_x000D_
}_x000D_
return matches;_x000D_
}_x000D_
_x000D_
_x000D_
// Example :_x000D_
var myString = 'something format_abc something format_def something format_ghi';_x000D_
var myRegEx = /(?:^|\s)format_(.*?)(?:\s|$)/g;_x000D_
_x000D_
// Get an array containing the first capturing group for every match_x000D_
var matches = getMatches(myString, myRegEx, 1);_x000D_
_x000D_
// Log results_x000D_
document.write(matches.length + ' matches found: ' + JSON.stringify(matches))_x000D_
console.log(matches);
_x000D_
As of April 2018, Chrome (along with several other major browsers) now require the muted
attribute too.
Therefore, you should use
<video width="320" height="240" autoplay loop muted>
<source src="movie.mp4" type="video/mp4" />
</video>
You have to create a new property (ex:selectedCountry) and should use it in [(ngModel)]
and further in component file assign default
value to it.
In your_component_file.ts
this.selectedCountry = default;
In your_component_template.html
<select id="country" formControlName="country" [(ngModel)]="selectedCountry">
<option *ngFor="let c of countries" [value]="c" >{{ c }}</option>
</select>
Early support for storing JSON in MySQL has been added to the MySQL 5.7.7 JSON labs release (linux binaries, source)! The release seems to have grown from a series of JSON-related user-defined functions made public back in 2013.
This nascent native JSON support seems to be heading in a very positive direction, including JSON validation on INSERT, an optimized binary storage format including a lookup table in the preamble that allows the JSN_EXTRACT function to perform binary lookups rather than parsing on every access. There is also a whole raft of new functions for handling and querying specific JSON datatypes:
CREATE TABLE users (id INT, preferences JSON);
INSERT INTO users VALUES (1, JSN_OBJECT('showSideBar', true, 'fontSize', 12));
SELECT JSN_EXTRACT(preferences, '$.showSideBar') from users;
+--------------------------------------------------+
| id | JSN_EXTRACT(preferences, '$.showSideBar') |
+--------------------------------------------------+
| 1 | true |
+--------------------------------------------------+
IMHO, the above is a great use case for this new functionality; many SQL databases already have a user table and, rather than making endless schema changes to accommodate an evolving set of user preferences, having a single JSON column a single JOIN
away is perfect. Especially as it's unlikely that it would ever need to be queried for individual items.
While it's still early days, the MySQL server team are doing a great job of communicating the changes on the blog.
I benefited a lot from 'Dive into HTML 5'. The explanation and demo are easier and to the point. History chapter - http://diveintohtml5.info/history.html and history demo - http://diveintohtml5.info/examples/history/fer.html
UIButton responds to addTarget:action:forControlEvents: since it inherits from UIControl. But it does not respond to addTarget:action:withObject:forControlEvents:
see reference for the method and for UIButton
You could extend UIButton with a category to implement that method, thought.
Long l = 100;
int i = Math.round(l);
#if defined LINUX || defined ANDROID
// your code here
#endif /* LINUX || ANDROID */
or-
#if defined(LINUX) || defined(ANDROID)
// your code here
#endif /* LINUX || ANDROID */
Both above are the same, which one you use simply depends on your taste.
P.S.: #ifdef
is simply the short form of #if defined
, however, does not support complex condition.
Further-
#if defined LINUX && defined ANDROID
#if defined LINUX ^ defined ANDROID
I'm not recommend it. I used to use it, but then when I work with NetBeans 7.4 it was messing my codes. I've to remove lombok in all of files in my projects. There is delombok, but how can I be sure it would not screw my codes. I have to spends days just to remove lombok and back to ordinary Java styles. I just too spicy...
$('#btn').click(function() {
$('#wizard').toggle();
});
if you want to begin with the div
hidden, you should add style="display:none;"
, like this:
<div style="display:none;"> </div>
Go to Start
> Programs
> Microsoft SQL Server
> Enterprise Manager
Right-click the SQL Server instance name > Select Properties
from the context menu > Select Security
node in left navigation bar
Under Authentication section, select SQL Server and Windows Authentication
Note: The server must be stopped and re-started before this will take effect
Error 18452 (not associated with a trusted sql server connection)
You can use transitions to delay the :hover
effect you want, if the effect is CSS-based.
For example
div{
transition: 0s background-color;
}
div:hover{
background-color:red;
transition-delay:1s;
}
this will delay applying the the hover effects (background-color
in this case) for one second.
Demo of delay on both hover on and off:
div{_x000D_
display:inline-block;_x000D_
padding:5px;_x000D_
margin:10px;_x000D_
border:1px solid #ccc;_x000D_
transition: 0s background-color;_x000D_
transition-delay:1s;_x000D_
}_x000D_
div:hover{_x000D_
background-color:red;_x000D_
}
_x000D_
<div>delayed hover</div>
_x000D_
Demo of delay only on hover on:
div{_x000D_
display:inline-block;_x000D_
padding:5px;_x000D_
margin:10px;_x000D_
border:1px solid #ccc;_x000D_
transition: 0s background-color;_x000D_
}_x000D_
div:hover{_x000D_
background-color:red; _x000D_
transition-delay:1s;_x000D_
}
_x000D_
<div>delayed hover</div>
_x000D_
Vendor Specific Extentions for Transitions and W3C CSS3 transitions
gem cleanup
uses system commands. Installed gems are just directories in the filesystem. If you want to batch delete, use rm -R
.
gem environment
and note the value of GEM PATHS
cd <your-gem-paths>/gems
ls -1 |grep rjb- |xargs rm -R
Just add these 2 lines;
android:gravity="center_horizontal"
android:textAlignment="center"
The reason is probably linked to the fact you are using a 64-bit OS and R version but do not have Java installed with the same architecture. What you have to do is to download Java 64-bit from this page: https://www.java.com/en/download/manual.jsp
After that just try to reload the xlsx
package. You shouldn't need to re-start R.
I know this is an older question but here are the steps I used to get cassandra-driver
to actually install on Windows 7 / Python2. I have windows 10 / Python3 at home where I will test this tonight. I have confirmed this also works on Windows 10 with both Python 2 and 3.
Problem
Command "python setup.py egg_info" failed with error code 1 in c:\users\Frito\appdata\local\temp\pip-build-7dgmdc\cassandra-driver
TL;DR Solution
Solution (I'd love for someone to explain why this worked)
pip install cassandra-driver
and got the above error messagepip install --pre cassandra-driver
and got the following errordistutils.errors.DistutilsError: Setup script exited with error: Microsoft Visual C++ 9.0 is required (Unable to find vcvarsall.bat). Get it from http://aka.ms/vcpython27 Command "c:\users\Frito\.virtualenvs\symdash\scripts\python.exe -u -c "import setuptools, tokenize;__file__='c:\\users\\Frito\\appdata\\local\\temp\\pip-build-sesxxu\\cassandra-driver\\setup.py';exec(compile(getattr(tokenize, 'open', open)(__file__).read().replace('\r\n', '\n'), __file__, 'exec'))" install --record c:\users\Frito\appdata\local\temp\pip-ujsxsk-record\install-record.txt --single-version-externally-managed --compile --install-headers c:\users\Frito\.virtualenvs\symdash\include\site\python2.7\cassandra-driver" failed with error code 1 in c:\users\Frito\appdata\local\temp\pip-build-sesxxu\cassandra-driver
Microsoft Visual C++ Compiler for Python 2.7
pip install --pre cassandra-driver
pip uninstall cassandra-driver
pip install cassandra-driver
To reiterate, I'm not really sure why this worked. Right now my two leading conclusions are that either the C++ compiler is required or that running the --pre
option the first time installed some dependencies that were missing from the 'regular' install. I'll update tonight after work when I have more details.
-- This is Interview Question asked every time. Now i done its coding.
static void Main(string[] args)
{
int[] array = new int[] { 4, 8, 4, 1, 1, 4, 8 };
int numDups = 0, prevIndex = 0;
for (int i = 0; i < array.Length; i++)
{
bool foundDup = false;
for (int j = 0; j < i; j++)
{
if (array[i] == array[j])
{
foundDup = true;
numDups++; // Increment means Count for Duplicate found in array.
break;
}
}
if (foundDup == false)
{
array[prevIndex] = array[i];
prevIndex++;
}
}
// Just Duplicate records replce by zero.
for (int k = 1; k <= numDups; k++)
{
array[array.Length - k] = '\0';
}
Console.WriteLine("Console program for Remove duplicates from array.");
Console.Read();
}
From the documentation:
The BuildAction property indicates what Visual Studio does with a file when a build is executed. BuildAction can have one of several values:
None - The file is not included in the project output group and is not compiled in the build process. An example is a text file that contains documentation, such as a Readme file.
Compile - The file is compiled into the build output. This setting is used for code files.
Content - The file is not compiled, but is included in the Content output group. For example, this setting is the default value for an .htm or other kind of Web file.
Embedded Resource - This file is embedded in the main project build output as a DLL or executable. It is typically used for resource files.
I had problems with this and this is the story (sad but true) :
If your table name is all lower case like : accounts
you can use: select * from AcCounTs
and it will work fine
If your table name is all lower case like : accounts
The following will fail:
select * from "AcCounTs"
If your table name is mixed case like : Accounts
The following will fail:
select * from accounts
If your table name is mixed case like : Accounts
The following will work OK:
select * from "Accounts"
I dont like remembering useless stuff like this but you have to ;)
Instead of using the new pragmas, you can also use __attribute__((optimize("O0")))
for your needs. This has the advantage of just applying to a single function and not all functions defined in the same file.
Usage example:
void __attribute__((optimize("O0"))) foo(unsigned char data) {
// unmodifiable compiler code
}
Yes, it is possible to run PowerShell through the run window. However, it would be burdensome and you will need to enter in the password for computer. This is similar to how you will need to set up when you run cmd:
runas /user:(ComputerName)\(local admin) powershell.exe
So a basic example would be:
runas /user:MyLaptop\[email protected] powershell.exe
You can find more information on this subject in Runas.
However, you could also do one more thing :
then your system will execute the elevated powershell.
None of these answers are very good for Python 3 (tested on latest version at the time of this post).
This is how you do it...
import urllib.request
try:
with urllib.request.urlopen('http://www.python.org/') as f:
print(f.read().decode('utf-8'))
except urllib.error.URLError as e:
print(e.reason)
The above is for contents that return 'utf-8'. Remove .decode('utf-8') if you want python to "guess the appropriate encoding."
Documentation: https://docs.python.org/3/library/urllib.request.html#module-urllib.request
You don't need HttpServletResponse to set a header on the response. You can do it using javax.ws.rs.core.Response. Just make your method to return Response instead of entity:
return Response.ok(entity).header("Content-Disposition", "attachment; filename=\"" + fileName + "\"").build()
If you still want to use HttpServletResponse you can get it either injected to one of the class fields, or using property, or to method parameter:
@Path("/resource")
class MyResource {
// one way to get HttpServletResponse
@Context
private HttpServletResponse anotherServletResponse;
// another way
Response myMethod(@Context HttpServletResponse servletResponse) {
// ... code
}
}
I just started with Kohana, and it seems the closest to Ruby on Rails without invoking all the complexity of multiple configuration files like with Propel.
All the responses above work okay, but you'll still probably get a CORS error, if the application throws an error you are not handling, like a key-error, if you aren't doing input validation properly, for example. You could add an error handler to catch all instances of exceptions and add CORS response headers in the server response
So define an error handler - errors.py:
from flask import json, make_response, jsonify
from werkzeug.exceptions import HTTPException
# define an error handling function
def init_handler(app):
# catch every type of exception
@app.errorhandler(Exception)
def handle_exception(e):
#loggit()!
# return json response of error
if isinstance(e, HTTPException):
response = e.get_response()
# replace the body with JSON
response.data = json.dumps({
"code": e.code,
"name": e.name,
"description": e.description,
})
else:
# build response
response = make_response(jsonify({"message": 'Something went wrong'}), 500)
# add the CORS header
response.headers['Access-Control-Allow-Origin'] = '*'
response.content_type = "application/json"
return response
then using Billal's answer:
from flask import Flask
from flask_cors import CORS
# import error handling file from where you have defined it
from . import errors
app = Flask(__name__)
CORS(app) # This will enable CORS for all routes
errors.init_handler(app) # initialise error handling
for(int i=0;i<ytFiles.size();i++){
int key = ytFiles.keyAt(i);
Log.e("key", String.valueOf(key));
String format = ytFiles.get(key).getFormat().toString();
String url = ytFiles.get(key).getUrl();
Log.e("url",url);
}
you can get key by method keyat and you have to pass the index then it will return key at that particular index. this loop will get all the key
The simpler way:
h = ''
i = None
j = 0
k = 1
print h or i or j or k
Will print 1
print k or j or i or h
Will print 1
Google did quietly enable offline recognition in that Search update, but there is (as yet) no API or additional parameters available within the SpeechRecognizer class. {See Edit at the bottom of this post} The functionality is available with no additional coding, however the user’s device will need to be configured correctly for it to begin working and this is where the problem lies and I would imagine why a lot of developers assume they are ‘missing something’.
Also, Google have restricted certain Jelly Bean devices from using the offline recognition due to hardware constraints. Which devices this applies to is not documented, in fact, nothing is documented, so configuring the capabilities for the user has proved to be a matter of trial and error (for them). It works for some straight away – For those that it doesn't, this is the ‘guide’ I supply them with.
EDIT: Temporarily changing the device locale to English UK also seems to kickstart this to work for some.
Some users reported they still had to reboot a number of times before it would begin working, but they all get there eventually, often inexplicably to what was the trigger, the key to which are inside the Google Search APK, so not in the public domain or part of AOSP.
From what I can establish, Google tests the availability of a connection prior to deciding whether to use offline or online recognition. If a connection is available initially but is lost prior to the response, Google will supply a connection error, it won’t fall-back to offline. As a side note, if a request for the network synthesised voice has been made, there is no error supplied it if fails – You get silence.
The Google Search update enabled no additional features in Google Now and in fact if you try to use it with no internet connection, it will error. I mention this as I wondered if the ability would be withdrawn as quietly as it appeared and therefore shouldn't be relied upon in production.
If you intend to start using the SpeechRecognizer class, be warned, there is a pretty major bug associated with it, which require your own implementation to handle.
Not being able to specifically request offline = true, makes controlling this feature impossible without manipulating the data connection. Rubbish. You’ll get hundreds of user emails asking you why you haven’t enabled something so simple!
EDIT: Since API level 23 a new parameter has been added EXTRA_PREFER_OFFLINE which the Google recognition service does appear to adhere to.
Hope the above helps.
You're missing your database name:
$sql = "SELECT ID, ListStID, ListEmail, Title FROM ".$entry_database." WHERE ID = ". $ReqBookID .";
And make sure that $entry_database isn't null or empty:
var_dump($entry_database);
Also notice that you don't need to have $ReqBookID in '' as if it's an Int.
You can use WScript.ScriptFullName which will return the full path of the executing script.
You can then use string manipulation (jscript example) :
scriptdir = WScript.ScriptFullName.substring(0,WScript.ScriptFullName.lastIndexOf(WScript.ScriptName)-1)
Or get help from FileSystemObject, (vbscript example) :
scriptdir = CreateObject("Scripting.FileSystemObject").GetParentFolderName(WScript.ScriptFullName)
Use the ArrayList copy constructor, then sort that.
List oldList;
List newList = new ArrayList(oldList);
Collections.sort(newList);
After making the copy, any changes to newList do not affect oldList.
Note however that only the references are copied, so the two lists share the same objects, so changes made to elements of one list affect the elements of the other.
Most common AD default design is to have a container, cn=users just after the root of the domain. Thus a DN might be:
cn=admin,cn=users,DC=domain,DC=company,DC=com
Also, you might have sufficient rights in an LDAP bind to connect anonymously, and query for (cn=admin)
. If so, you should get the full DN back in that query.
In MySQL, It should be like this
INSERT INTO this_table_archive (col1, col2, ..., coln)
SELECT col1, col2, ..., coln
FROM this_table
WHERE entry_date < '2011-01-01 00:00:00';
The safest and most complete way to replace the current local branch with the remote:
git stash
git merge --abort
git rebase --abort
git branch -M yourBranch replaced_yourBranch
git fetch origin yourBranch:yourBranch
git checkout yourBranch
The stash
line saves the changes that you have not committed. The branch
line moves your branch to a different name, freeing up the original name. The fetch
line retrieves the latest copy of the remote. The checkout
line recreates the original branch as a tracking branch.
Or as a bash function:
replaceWithRemote() {
yourBranch=${1:-`git rev-parse --abbrev-ref HEAD`}
git stash
git merge --abort
git rebase --abort
git branch -M ${yourBranch} replaced_${yourBranch}_`git rev-parse --short HEAD`
git fetch origin ${yourBranch}:${yourBranch}
git checkout ${yourBranch}
}
which renames the current branch to something like replaced_master_98d258f.
You can include CSS styles in an html document with <style></style>
tags.
Example:
<style>
.myClass { background: #f00; }
.myOtherClass { font-size: 12px; }
</style>
From version 1.9 Easier and official way of getting json
from django.http import JsonResponse
from django.forms.models import model_to_dict
return JsonResponse( model_to_dict(modelinstance) )
CSS code:
.hide{
display:none;
}
.show{
display:block;
}
Html code:
<button onclick="block_none()">Check Availability</button>
Javascript Code:
function block_none(){
document.getElementById('hidden-div').classList.add('show');
document.getElementById('button-id').classList.add('hide');
}
Simply saying, any() does this work : according to the condition even if it encounters one fulfilling value in the list, it returns true, else it returns false.
list = [2,-3,-4,5,6]
a = any(x>0 for x in lst)
print a:
True
list = [2,3,4,5,6,7]
a = any(x<0 for x in lst)
print a:
False
On my machine a PID was not being shown from this command netstat -tulpn
for the in-use port (8080), so i could not kill it, killing the containers and restarting the computer did not work. So service docker restart
command restarted docker for me (ubuntu) and the port was no longer in use and i am a happy chap and off to lunch.
The error message is giving you most of what you need. This isn't just about the TrustedHosts list; it's saying that in order to use an IP address with the default authentication scheme, you have to ALSO be using HTTPS (which isn't configured by default) and provide explicit credentials. I can tell you're at least not using SSL, because you didn't use the -UseSSL switch.
Note that SSL/HTTPS is not configured by default - that's an extra step you'll have to take. You can't just add -UseSSL.
The default authentication mechanism is Kerberos, and it wants to see real host names as they appear in AD. Not IP addresses, not DNS CNAME nicknames. Some folks will enable Basic authentication, which is less picky - but you should also set up HTTPS since you'd otherwise pass credentials in cleartext. Enable-PSRemoting only sets up HTTP.
Adding names to your hosts file won't work. This isn't an issue of name resolution; it's about how the mutual authentication between computers is carried out.
Additionally, if the two computers involved in this connection aren't in the same AD domain, the default authentication mechanism won't work. Read "help about_remote_troubleshooting" for information on configuring non-domain and cross-domain authentication.
From the docs at http://technet.microsoft.com/en-us/library/dd347642.aspx
HOW TO USE AN IP ADDRESS IN A REMOTE COMMAND
-----------------------------------------------------
ERROR: The WinRM client cannot process the request. If the
authentication scheme is different from Kerberos, or if the client
computer is not joined to a domain, then HTTPS transport must be used
or the destination machine must be added to the TrustedHosts
configuration setting.
The ComputerName parameters of the New-PSSession, Enter-PSSession and
Invoke-Command cmdlets accept an IP address as a valid value. However,
because Kerberos authentication does not support IP addresses, NTLM
authentication is used by default whenever you specify an IP address.
When using NTLM authentication, the following procedure is required
for remoting.
1. Configure the computer for HTTPS transport or add the IP addresses
of the remote computers to the TrustedHosts list on the local
computer.
For instructions, see "How to Add a Computer to the TrustedHosts
List" below.
2. Use the Credential parameter in all remote commands.
This is required even when you are submitting the credentials
of the current user.
I have this to simply rename all files in subfolders of folder
import os
def replace(fpath, old_str, new_str):
for path, subdirs, files in os.walk(fpath):
for name in files:
if(old_str.lower() in name.lower()):
os.rename(os.path.join(path,name), os.path.join(path,
name.lower().replace(old_str,new_str)))
I am replacing all occurences of old_str with any case by new_str.
You should take a look the reference documentation. It's well explained.
In your case, I think you cannot use between because you need to pass two parameters
Between - findByStartDateBetween … where x.startDate between ?1 and ?2
In your case take a look to use a combination of LessThan
or LessThanEqual
with GreaterThan
or GreaterThanEqual
LessThan - findByEndLessThan … where x.start< ?1
LessThanEqual findByEndLessThanEqual … where x.start <= ?1
GreaterThan - findByStartGreaterThan … where x.end> ?1
GreaterThanEqual - findByStartGreaterThanEqual … where x.end>= ?1
You can use the operator And
and Or
to combine both.
Try this one:
#!/bin/bash
psql -U postgres -d database_name -c "SELECT c_defaults FROM user_info WHERE c_uid = 'testuser'"
Or using su
:
#!/bin/bash
su -c "psql -d database_name -c \"SELECT c_defaults FROM user_info WHERE c_uid = 'testuser'\"" postgres
And also sudo
:
#!/bin/bash
sudo -u postgres -H -- psql -d database_name -c "SELECT c_defaults FROM user_info WHERE c_uid = 'testuser'"
HTML:
<div class="foo">
/* whatever is required */
</div>
CSS:
.foo {
top: 0;
transition: top ease 0.5s;
}
.foo:hover{
top: -10px;
}
This is just a basic transition to ease the div tag up by 10px when it is hovered on. The transition property's values can be edited along with the class.hover properties to determine how the transition works.
where 'n' is some number of arrays, maybe an array of arrays . . .
var answer = _.reduce(n, function(a, b){ return a.concat(b)})
It is allow as TD can contain inline- AND block-elements.
Here you can find it in the reference: http://xhtml.com/en/xhtml/reference/td/#td-contains
Comparison expressions should each be in their own brackets:
{% if (a == 'foo') or (b == 'bar') %}
...
{% endif %}
Alternative if you are inspecting a single variable and a number of possible values:
{% if a in ['foo', 'bar', 'qux'] %}
...
{% endif %}
You can use block (/***/) or single line comment (//) for each line. You should use "#" in sh command.
Block comment
/* _x000D_
post {_x000D_
success {_x000D_
mail to: "[email protected]", _x000D_
subject:"SUCCESS: ${currentBuild.fullDisplayName}", _x000D_
body: "Yay, we passed."_x000D_
}_x000D_
failure {_x000D_
mail to: "[email protected]", _x000D_
subject:"FAILURE: ${currentBuild.fullDisplayName}", _x000D_
body: "Boo, we failed."_x000D_
}_x000D_
}_x000D_
*/
_x000D_
Single Line
// post {_x000D_
// success {_x000D_
// mail to: "[email protected]", _x000D_
// subject:"SUCCESS: ${currentBuild.fullDisplayName}", _x000D_
// body: "Yay, we passed."_x000D_
// }_x000D_
// failure {_x000D_
// mail to: "[email protected]", _x000D_
// subject:"FAILURE: ${currentBuild.fullDisplayName}", _x000D_
// body: "Boo, we failed."_x000D_
// }_x000D_
// }
_x000D_
Comment in 'sh' command
stage('Unit Test') {_x000D_
steps {_x000D_
ansiColor('xterm'){_x000D_
sh '''_x000D_
npm test_x000D_
# this is a comment in sh_x000D_
'''_x000D_
}_x000D_
}_x000D_
}
_x000D_
You can use a $where. Just be aware it will be fairly slow (has to execute Javascript code on every record) so combine with indexed queries if you can.
db.T.find( { $where: function() { return this.Grade1 > this.Grade2 } } );
or more compact:
db.T.find( { $where : "this.Grade1 > this.Grade2" } );
you can use $expr
as described in recent answer
Unfortunately the only way I could resolve my problem is to root the device.
Here is a good tutorial for Nexus S:
http://nexusshacks.com/nexus-s-root/how-to-root-nexus-s-or-nexus-s-4g-on-ics-or-gingerbread/
Abstract Class : Use it when there is strong is-a relation between super class and sub class and all subclass share some common behavior .
Interface : It define just protocol which all subclass need to follow.
Building off of @Karl Rosaen
parser = argparse.ArgumentParser()
optional = parser._action_groups.pop() # Edited this line
required = parser.add_argument_group('required arguments')
# remove this line: optional = parser...
required.add_argument('--required_arg', required=True)
optional.add_argument('--optional_arg')
parser._action_groups.append(optional) # added this line
return parser.parse_args()
and this outputs:
usage: main.py [-h] [--required_arg REQUIRED_ARG]
[--optional_arg OPTIONAL_ARG]
required arguments:
--required_arg REQUIRED_ARG
optional arguments:
-h, --help show this help message and exit
--optional_arg OPTIONAL_ARG
Or you can do this:
<table>
<tr>
<td><b>Return:</b></td>
<td><input id="return1" name='return1'
class=" input input-sm" style="width:150px"
type="text" value='8/28/2013'></td>
</tr>
</table>
I tried every one of the suggestions above and none of them worked. I don't want to pick a fixed number of columns in the 12 column grid. I want the prompt, and the input right after it, and I want the columns to stretch as needed.
Yes, I know, that is against what bootstrap is all about. And you should NEVER use a table. Because DIV is so much better than tables. But the problem is that tables, rows, and cells actually WORK.
YES - I REALLY DO know that there are CSS zealots, and the knee-jerk reaction is never never never use TABLE, TR, and TD. Yes, I do know that DIV class="table" with DIV class="row" and DIV class="cell" is much much better. Except when it doesn't work, and there are many cases. I don't believe that people should blindly ignore those situations. There are times that the TABLE/TR/TD will work just fine, and there is not reason to use a more complicated and more fragile approach just because it is considered more elegant. A developer should understand what the benefits of the various approaches are, and the tradeoffs, and there is no absolute rule that DIVs are better.
"Case in point - based on this discussion I converted a few existing tds and trs to divs. 45 minutes messing about with it trying to get everything to line up next to each other and I gave up. TDs back in 10 seconds later - works - straight away - on all browsers, nothing more to do. Please try to make me understand - what possible justification do you have for wanting me to do it any other way!" See [https://stackoverflow.com/a/4278073/1758051]
And this: "
Layout should be easy. The fact that there are articles written on how to achieve a dynamic three column layout with header and footer in CSS shows that it is a poor layout system. Of course you can get it to work, but there are literally hundreds of articles online about how to do it. There are pretty much no such articles for a similar layout with tables because it's patently obvious. No matter what you say against tables and in favor of CSS, this one fact undoes it all: a basic three column layout in CSS is often called "The Holy Grail"." [https://stackoverflow.com/a/4964107/1758051]
I have yet to see a way to force DIVs to always line up in a column in all situations. I keep getting shown trivial examples that don't really run into the problems. "Responsive" is about providing a way that they will not always line up in a column. However, if you really want a column, you can waste hours trying to get DIV to work. Sometimes, you need to use appropriate technology no matter what the zealots say.
You have to set the property of StoreGeneratedPattern
to identity and then try your own code.
Or else you can also use this.
using (var context = new MyContext())
{
context.MyEntities.AddObject(myNewObject);
context.SaveChanges();
int id = myNewObject.Id; // Your Identity column ID
}
Use the enumerate
built-in function: http://docs.python.org/library/functions.html#enumerate
"ASCII is a subset of UTF-8, so..." - so UTF-8 is a set? :)
In other words: any string build with code points
from x00 to x7F has indistinguishable representations (byte sequences) in ASCII and UTF-8. Converting such string is pointless.
The solution is to simply reinstall ggplot2
. Maybe there is an incompatibility between the R version you are using, and your installed version of ggplot2
. Alternatively, something might have gone wrong while installing ggplot2
earlier, causing the issue you see.
use this attribute in style
font-size: 11px !important;//your font size
by !important it override your css
Another solution which works in Python 2 and 3:
#foo.py
import sys
class Foo(object):
pass
def print_classes():
current_module = sys.modules[__name__]
for key in dir(current_module):
if isinstance( getattr(current_module, key), type ):
print(key)
# test.py
import foo
foo.print_classes()
Please see: http://www.sap-img.com/oracle-database/finding-oracle-sid-of-a-database.htm
What is the difference between Oracle SIDs and Oracle SERVICE NAMES. One config tool looks for SERVICE NAME and then the next looks for SIDs! What's going on?!
Oracle SID is the unique name that uniquely identifies your instance/database where as Service name is the TNS alias that you give when you remotely connect to your database and this Service name is recorded in Tnsnames.ora file on your clients and it can be the same as SID and you can also give it any other name you want.
SERVICE_NAME is the new feature from oracle 8i onwards in which database can register itself with listener. If database is registered with listener in this way then you can use SERVICE_NAME parameter in tnsnames.ora otherwise - use SID in tnsnames.ora.
Also if you have OPS (RAC) you will have different SERVICE_NAME for each instance.
SERVICE_NAMES specifies one or more names for the database service to which this instance connects. You can specify multiple services names in order to distinguish among different uses of the same database. For example:
SERVICE_NAMES = sales.acme.com, widgetsales.acme.com
You can also use service names to identify a single service that is available from two different databases through the use of replication.
In an Oracle Parallel Server environment, you must set this parameter for every instance.
In short: SID = the unique name of your DB instance, ServiceName = the alias used when connecting
Try this method for uploading Image file from camera
package com.example.imageupload;
import java.io.ByteArrayInputStream;
import java.io.ByteArrayOutputStream;
import java.io.File;
import java.io.FileInputStream;
import java.io.FileNotFoundException;
import java.io.IOException;
import java.io.InputStream;
import java.io.OutputStream;
import org.apache.http.Header;
import org.apache.http.HttpEntity;
import org.apache.http.message.BasicHeader;
public class MultipartEntity implements HttpEntity {
private String boundary = null;
ByteArrayOutputStream out = new ByteArrayOutputStream();
boolean isSetLast = false;
boolean isSetFirst = false;
public MultipartEntity() {
this.boundary = System.currentTimeMillis() + "";
}
public void writeFirstBoundaryIfNeeds() {
if (!isSetFirst) {
try {
out.write(("--" + boundary + "\r\n").getBytes());
} catch (final IOException e) {
}
}
isSetFirst = true;
}
public void writeLastBoundaryIfNeeds() {
if (isSetLast) {
return;
}
try {
out.write(("\r\n--" + boundary + "--\r\n").getBytes());
} catch (final IOException e) {
}
isSetLast = true;
}
public void addPart(final String key, final String value) {
writeFirstBoundaryIfNeeds();
try {
out.write(("Content-Disposition: form-data; name=\"" + key + "\"\r\n")
.getBytes());
out.write("Content-Type: text/plain; charset=UTF-8\r\n".getBytes());
out.write("Content-Transfer-Encoding: 8bit\r\n\r\n".getBytes());
out.write(value.getBytes());
out.write(("\r\n--" + boundary + "\r\n").getBytes());
} catch (final IOException e) {
}
}
public void addPart(final String key, final String fileName,
final InputStream fin) {
addPart(key, fileName, fin, "application/octet-stream");
}
public void addPart(final String key, final String fileName,
final InputStream fin, String type) {
writeFirstBoundaryIfNeeds();
try {
type = "Content-Type: " + type + "\r\n";
out.write(("Content-Disposition: form-data; name=\"" + key
+ "\"; filename=\"" + fileName + "\"\r\n").getBytes());
out.write(type.getBytes());
out.write("Content-Transfer-Encoding: binary\r\n\r\n".getBytes());
final byte[] tmp = new byte[4096];
int l = 0;
while ((l = fin.read(tmp)) != -1) {
out.write(tmp, 0, l);
}
out.flush();
} catch (final IOException e) {
} finally {
try {
fin.close();
} catch (final IOException e) {
}
}
}
public void addPart(final String key, final File value) {
try {
addPart(key, value.getName(), new FileInputStream(value));
} catch (final FileNotFoundException e) {
}
}
public long getContentLength() {
writeLastBoundaryIfNeeds();
return out.toByteArray().length;
}
public Header getContentType() {
return new BasicHeader("Content-Type", "multipart/form-data; boundary="
+ boundary);
}
public boolean isChunked() {
return false;
}
public boolean isRepeatable() {
return false;
}
public boolean isStreaming() {
return false;
}
public void writeTo(final OutputStream outstream) throws IOException {
outstream.write(out.toByteArray());
}
public Header getContentEncoding() {
return null;
}
public void consumeContent() throws IOException,
UnsupportedOperationException {
if (isStreaming()) {
throw new UnsupportedOperationException(
"Streaming entity does not implement #consumeContent()");
}
}
public InputStream getContent() throws IOException,
UnsupportedOperationException {
return new ByteArrayInputStream(out.toByteArray());
}
}
Use of class for uploading
private void doFileUpload(File file_path) {
Log.d("Uri", "Do file path" + file_path);
try {
HttpClient client = new DefaultHttpClient();
//use your server path of php file
HttpPost post = new HttpPost(ServerUploadPath);
Log.d("ServerPath", "Path" + ServerUploadPath);
FileBody bin1 = new FileBody(file_path);
Log.d("Enter", "Filebody complete " + bin1);
MultipartEntity reqEntity = new MultipartEntity();
reqEntity.addPart("uploaded_file", bin1);
reqEntity.addPart("email", new StringBody(useremail));
post.setEntity(reqEntity);
Log.d("Enter", "Image send complete");
HttpResponse response = client.execute(post);
resEntity = response.getEntity();
Log.d("Enter", "Get Response");
try {
final String response_str = EntityUtils.toString(resEntity);
if (resEntity != null) {
Log.i("RESPONSE", response_str);
JSONObject jobj = new JSONObject(response_str);
result = jobj.getString("ResponseCode");
Log.e("Result", "...." + result);
}
} catch (Exception ex) {
Log.e("Debug", "error: " + ex.getMessage(), ex);
}
} catch (Exception e) {
Log.e("Upload Exception", "");
e.printStackTrace();
}
}
Service for uploading
<?php
$image_name = $_FILES["uploaded_file"]["name"];
$tmp_arr = explode(".",$image_name);
$img_extn = end($tmp_arr);
$new_image_name = 'image_'. uniqid() .'.'.$img_extn;
$flag=0;
if (file_exists("Images/".$new_image_name))
{
$msg=$new_image_name . " already exists."
header('Content-type: application/json');
echo json_encode(array("ResponseCode"=>"2","ResponseMsg"=>$msg));
}else{
move_uploaded_file($_FILES["uploaded_file"]["tmp_name"],"Images/". $new_image_name);
$flag = 1;
}
if($flag == 1){
require 'db.php';
$static_url =$new_image_name;
$conn=mysql_connect($db_host,$db_username,$db_password) or die("unable to connect localhost".mysql_error());
$db=mysql_select_db($db_database,$conn) or die("unable to select message_app");
$email = "";
if((isset($_REQUEST['email'])))
{
$email = $_REQUEST['email'];
}
$sql ="insert into alert(images) values('$static_url')";
$result=mysql_query($sql);
if($result){
echo json_encode(array("ResponseCode"=>"1","ResponseMsg"=> "Insert data successfully.","Result"=>"True","ImageName"=>$static_url,"email"=>$email));
} else
{
echo json_encode(array("ResponseCode"=>"2","ResponseMsg"=> "Could not insert data.","Result"=>"False","email"=>$email));
}
}
else{
echo json_encode(array("ResponseCode"=>"2","ResponseMsg"=> "Erroe While Inserting Image.","Result"=>"False"));
}
?>
This is a very late response, but adds some detail on the previous answers
When it comes to calling static methods in PHP from another static method on the same class, it is important to differentiate between self
and the class name.
Take for instance this code:
class static_test_class {
public static function test() {
echo "Original class\n";
}
public static function run($use_self) {
if($use_self) {
self::test();
} else {
$class = get_called_class();
$class::test();
}
}
}
class extended_static_test_class extends static_test_class {
public static function test() {
echo "Extended class\n";
}
}
extended_static_test_class::run(true);
extended_static_test_class::run(false);
The output of this code is:
Original class
Extended class
This is because self
refers to the class the code is in, rather than the class of the code it is being called from.
If you want to use a method defined on a class which inherits the original class, you need to use something like:
$class = get_called_class();
$class::function_name();
String name = modelOrderList.get(position).getName(); //get name from List
String text = "<font color='#000000'>" + name + "</font>"; //set Black color of name
/* check API version, according to version call method of Html class */
if (android.os.Build.VERSION.SDK_INT < android.os.Build.VERSION_CODES.N) {
Log.d(TAG, "onBindViewHolder: if");
holder.textViewName.setText(context.getString(R.string._5687982) + " ");
holder.textViewName.append(Html.fromHtml(text));
} else {
Log.d(TAG, "onBindViewHolder: else");
holder.textViewName.setText("123456" + " "); //set text
holder.textViewName.append(Html.fromHtml(text, Html.FROM_HTML_MODE_LEGACY)); //append text into textView
}
You should start using jQuery or some other js lib. It's way easier than js, and you can use it as a shorthand for most js instead of actually long, drawn out js.
Simply put <script src="//ajax.googleapis.com/ajax/libs/jquery/1.9.1/jquery.min.js"></script>
(or whatever the latest google cdn is https://developers.google.com/speed/libraries/devguide#jquery) in your <head>
.
Then, inside your event
code (much easier if you use jQuery: $.click()
for buttons, $.change()
for checkboxes, selects, radios...), put the code from your second link looking more like
$('#theIDofTheButtonThatTriggersThisAnimation').click(function(){
$('#theIDofTheElementYouWantToSmoothlyScroll').animate({
scrollTop: 0
}, 2000);
});
However, if you're trying to do animations, I recommend you look into some basic css properties like position:absolute
and position:relative
to keep from going crazy.
I'm still not quite sure what's going on in your code because it's very non-standard relative to how things are done now with css & jQuery. I'd break it down into something simple to learn the general concept.
For your example, you should build off of my animation example, how I learned: https://stackoverflow.com/a/12906254/1382306
I think you're trying to move your text up and down based upon a $.click()
. In the fiddle in my answer, it slides left and right. You can easily reformat up and down by using the css top
property instead of left
.
Once you figure out how to move the entire div
up and down, you can make a relative
container to hold all of the content absolute
div
s and manipulate all content div
s with a loop by setting their top
s. Here's a quick primer on absolute
in relative
: http://css-tricks.com/absolute-positioning-inside-relative-positioning/
All of my animations have relative
containers and absolute
content. It's how I made a custom gridview plugin that can instantly zip through an entire database.
Also, there really is no overuse of div
s when it comes to animating. Trying to make 1 div
do everything is a nightmare.
Try to see if you can reformat my fiddle into a vertical slide out. Once you've done that, research absolute
in relative
a little. If you have any more problems, just ask another question.
Change your thinking to these philosophies, and you'll start flying through this type of coding.
In the first two cases, you simply forgot to actually call the member function (!, it's not a value) std::vector<int>::size
like this:
#include <vector>
int main () {
std::vector<int> v;
auto size = v.size();
}
Your third call
int size = v.size();
triggers a warning, as not every return value of that function (usually a 64 bit unsigned int) can be represented as a 32 bit signed int.
int size = static_cast<int>(v.size());
would always compile cleanly and also explicitly states that your conversion from std::vector::size_type
to int
was intended.
Note that if the size of the vector
is greater than the biggest number an int
can represent, size
will contain an implementation defined (de facto garbage) value.
I faced the same problem on Mac OS X and with Miniconda. After trying many of the proposed solutions for hours I found that I needed to correctly set Condas environment – specifically requests environment variable – to use the Root certificate that my company provided rather than the generic ones that Conda provides.
Here is how I solved it:
openssl x509 -inform der -in /path/to/your/certificate.cer -out /path/to/converted/certificate.pem
export REQUESTS_CA_BUNDLE=/path/to/converted/certificate.pem
.bshrs
or e.g. .zshrc
) and add this line: export REQUESTS_CA_BUNDLE=/path/to/converted/certificate.pem
. Now exit your terminal/shell and reopen. Check again. You should be set and Conda should work fine.
Move points into test:
def test():
points = 0
addpoint = raw_input ("type ""add"" to add a point")
...
or use global statement, but it is bad practice. But better way it move points to parameters:
def test(points=0):
addpoint = raw_input ("type ""add"" to add a point")
...
If you see this intermittently on wifi or LAN, but your mobile internet connection seems ok, it is most likely your ISP's cheap gateway router is experiencing high traffic load.
You should trap these errors and display a reminder to the user to close any other apps using the network.
Test by running a couple of HD youtube videos on your desktop to reproduce, or just go to a busy Starbucks.
Following code will solve json response if there Basic Authentication and Proxy implemented.Also IIS 7.5 Hosting Problm will resolve.
public string HttpGetByWebRequ(string uri, string username, string password)
{
//For Basic Authentication
string authInfo = username + ":" + password;
authInfo = Convert.ToBase64String(Encoding.Default.GetBytes(authInfo));
//For Proxy
WebProxy proxy = new WebProxy("http://10.127.0.1:8080", true);
HttpWebRequest request = (HttpWebRequest)WebRequest.Create(uri);
request.Method = "GET";
request.Accept = "application/json; charset=utf-8";
request.Proxy = proxy;
request.Headers["Authorization"] = "Basic " + authInfo;
var response = (HttpWebResponse)request.GetResponse();
string strResponse = "";
using (var sr = new StreamReader(response.GetResponseStream()))
{
strResponse= sr.ReadToEnd();
}
return strResponse;
}
I incurred this error once.
It turns out I had named my program ProgramMame.ccp instead of ProgramName.cpp
easy to do ...
Hope this may help
@magi182's solution is solid, but it lacks the ability to set a maximum width. I think a maximum width of 640px is necessary because otherwhise the youtube thumbnail looks pixelated.
My solution with two wrappers works like a charm for me:
.videoWrapperOuter {
max-width:640px;
margin-left:auto;
margin-right:auto;
}
.videoWrapperInner {
float: none;
clear: both;
width: 100%;
position: relative;
padding-bottom: 50%;
padding-top: 25px;
height: 0;
}
.videoWrapperInner iframe {
position: absolute;
top: 0;
left: 0;
width: 100%;
height: 100%;
}
<div class="videoWrapperOuter">
<div class="videoWrapperInner">
<iframe src="//www.youtube.com/embed/C6-TWRn0k4I"
frameborder="0" allowfullscreen></iframe>
</div>
</div>
I also set the padding-bottom in the inner wrapper to 50 %, because with @magi182's 56 %, a black bar on top and bottom appeared.
++ This worked for me. It's vanilla javascirpt
and good for use cases such as de-cluttering when testing with ngMocks
library:
<!-- specRunner.html - keep this at the top of your <script> asset loading so that it is available readily -->
<!-- Frienly tip - have all JSON files in a json-data folder for keeping things organized-->
<script src="json-data/findByIdResults.js" charset="utf-8"></script>
<script src="json-data/movieResults.js" charset="utf-8"></script>
This is your javascript
file that contains the JSON
data
// json-data/JSONFindByIdResults.js
var JSONFindByIdResults = {
"Title": "Star Wars",
"Year": "1983",
"Rated": "N/A",
"Released": "01 May 1983",
"Runtime": "N/A",
"Genre": "Action, Adventure, Sci-Fi",
"Director": "N/A",
"Writer": "N/A",
"Actors": "Harrison Ford, Alec Guinness, Mark Hamill, James Earl Jones",
"Plot": "N/A",
"Language": "English",
"Country": "USA",
"Awards": "N/A",
"Poster": "N/A",
"Metascore": "N/A",
"imdbRating": "7.9",
"imdbVotes": "342",
"imdbID": "tt0251413",
"Type": "game",
"Response": "True"
};
Finally, work with the JSON data anywhere in your code
// working with JSON data in code
var findByIdResults = window.JSONFindByIdResults;
Note:- This is great for testing and even karma.conf.js
accepts these files for running tests as seen below. Also, I recommend this only for de-cluttering data and testing/development
environment.
// extract from karma.conf.js
files: [
'json-data/JSONSearchResultHardcodedData.js',
'json-data/JSONFindByIdResults.js'
...
]
Hope this helps.
++ Built on top of this answer https://stackoverflow.com/a/24378510/4742733
UPDATE
An easier way that worked for me is just include a function
at the bottom of the code returning whatever JSON
.
// within test code
let movies = getMovieSearchJSON();
.....
...
...
....
// way down below in the code
function getMovieSearchJSON() {
return {
"Title": "Bri Squared",
"Year": "2011",
"Rated": "N/A",
"Released": "N/A",
"Runtime": "N/A",
"Genre": "Comedy",
"Director": "Joy Gohring",
"Writer": "Briana Lane",
"Actors": "Brianne Davis, Briana Lane, Jorge Garcia, Gabriel Tigerman",
"Plot": "N/A",
"Language": "English",
"Country": "USA",
"Awards": "N/A",
"Poster": "http://ia.media-imdb.com/images/M/MV5BMjEzNDUxMDI4OV5BMl5BanBnXkFtZTcwMjE2MzczNQ@@._V1_SX300.jpg",
"Metascore": "N/A",
"imdbRating": "8.2",
"imdbVotes": "5",
"imdbID": "tt1937109",
"Type": "movie",
"Response": "True"
}
}
This is what worked for me:
button:focus {
box-shadow:none;
}
When it comes to DiSaSteR's answer, I noticed a different behavior. textBox.Text shows the text in the TextBox as it was before the user entered a new character, while e.Text shows the single character the user just entered. One challenge is that this character might not get appended to the end, but it will be inserted at the carret position:
private void salary_texbox_PreviewTextInput(object sender, TextCompositionEventArgs e){
Regex regex = new Regex ( "[^0-9]+" );
string text;
if (textBox.CaretIndex==textBox.Text.Length) {
text = textBox.Text + e.Text;
} else {
text = textBox.Text.Substring(0, textBox.CaretIndex) + e.Text + textBox.Text.Substring(textBox.CaretIndex);
}
if(regex.IsMatch(text)){
MessageBox.Show("Error");
}
}
Solution 1:
Extract P12 from jks
keytool -importkeystore -srckeystore MyRootCA.jks -destkeystore MyRootCA.p12 -deststoretype PKCS12
Extract PEM from P12 and Edit file and pem from crt file
openssl pkcs12 -in MyRootCA.p12 -clcerts -nokeys -out MyRootCA.crt
Extract key from jks
openssl pkcs12 -in MyRootCA.p12 -nocerts -out encryptedPrivateKey.pem
openssl rsa -in encryptedPrivateKey.pem -out decryptedPrivateKey.key
Solution 2:
Extract PEM and encryptedPrivateKey to txt file```
openssl pkcs12 -in MyRootCA.p12 -out keys_out.txt
Decrypt privateKey
openssl rsa -in encryptedPrivateKey.key [-outform PEM] -out decryptedPrivateKey.key
You can use code snippets to insert any lines you want.
Also, if you type three single quotation marks (''') on the line above the function header, it will insert the XML header template that you can then fill out.
These XML comments can be interpreted by documentation software, and they are included in the build output as an assembly.xml file. If you keep that XML file with the DLL and reference that DLL in another project, those comments become available in intellisense.
Here's a variation of DixonD's code that adds number of seconds to wait for file to unlock, and try again:
public bool IsFileLocked(string filePath, int secondsToWait)
{
bool isLocked = true;
int i = 0;
while (isLocked && ((i < secondsToWait) || (secondsToWait == 0)))
{
try
{
using (File.Open(filePath, FileMode.Open)) { }
return false;
}
catch (IOException e)
{
var errorCode = Marshal.GetHRForException(e) & ((1 << 16) - 1);
isLocked = errorCode == 32 || errorCode == 33;
i++;
if (secondsToWait !=0)
new System.Threading.ManualResetEvent(false).WaitOne(1000);
}
}
return isLocked;
}
if (!IsFileLocked(file, 10))
{
...
}
else
{
throw new Exception(...);
}
Another option (courtesy of Alex Martelli - source):
dict(x[i:i+2] for i in range(0, len(x), 2))
If you have this:
a = ['bi','double','duo','two']
and you want this (each element of the list keying a given value (2 in this case)):
{'bi':2,'double':2,'duo':2,'two':2}
you can use:
>>> dict((k,2) for k in a)
{'double': 2, 'bi': 2, 'two': 2, 'duo': 2}
PHP cannot force the client to do anything. It cannot refresh the page, let alone refresh the parent of a frame.
EDIT: You can of course, make PHP write JavaScript, but this is not PHP doing, it's actually JavaScript, and it will fail if JavaScript is disabled.
<?php
echo '<script>parent.window.location.reload(true);</script>';
?>
Here is my example, first the user gets to write in the number he/she wants to dial and then presses a call button and gets directed to the phone. After call cancelation the user gets sent back to the application. In order to this the button needs to have a onClick method ('makePhoneCall' in this example) in the xml. You also need to register the permission in the manifest.
Manifest
<uses-permission android:name="android.permission.CALL_PHONE"></uses-permission>
<uses-permission android:name="android.permission.READ_PHONE_STATE" />
Activity
import android.net.Uri;
import android.os.Bundle;
import android.app.Activity;
import android.content.Intent;
import android.view.View;
import android.widget.EditText;
import android.widget.Toast;
public class PhoneCall extends Activity {
EditText phoneTo;
@Override
protected void onCreate(Bundle savedInstanceState) {
super.onCreate(savedInstanceState);
setContentView(R.layout.activity_phone_call);
phoneTo = (EditText) findViewById(R.id.phoneNumber);
}
public void makePhoneCall(View view) {
try {
String number = phoneTo.getText().toString();
Intent phoneIntent = new Intent(Intent.ACTION_CALL);
phoneIntent.setData(Uri.parse("tel:"+ number));
startActivity(phoneIntent);
} catch (android.content.ActivityNotFoundException ex) {
Toast.makeText(PhoneCall.this,
"Call failed, please try again later!", Toast.LENGTH_SHORT).show();
}
}
}
XML
<EditText
android:layout_width="wrap_content"
android:layout_height="wrap_content"
android:inputType="phone"
android:ems="10"
android:id="@+id/phoneNumber"
android:layout_marginTop="67dp"
android:layout_below="@+id/textView"
android:layout_centerHorizontal="true" />
<Button
android:layout_width="fill_parent"
android:layout_height="wrap_content"
android:text="Call"
android:id="@+id/makePhoneCall"
android:onClick="makePhoneCall"
android:layout_alignParentBottom="true"
android:layout_centerHorizontal="true" />
Check remote branch list:
git branch -a
Switch to another Branch:
git checkout -b <local branch name> <Remote branch name>
Example: git checkout -b Dev_8.4 remotes/gerrit/Dev_8.4
Check local Branch list:
git branch
Update everything:
git pull
I would to it like this:
//Dictionary object with Key as string and Value as List of Component type object
Dictionary<String, List<Component>> dic = new Dictionary<String, List<Component>>();
//from each element of the dictionary select first component if any
IEnumerable<Component> components = dic.Where(kvp => kvp.Value.Any()).Select(kvp => (kvp.Value.First() as Component).ComponentValue("Dep"));
but only if it is sure that list contains only objects of Component class or children
You need to set the password for root@localhost
to be blank. There are two ways:
The MySQL SET PASSWORD
command:
SET PASSWORD FOR root@localhost=PASSWORD('');
Using the command-line mysqladmin
tool:
mysqladmin -u root -pType_in_your_current_password_here password ''
Assuming that your markup looks like:
<div id="header" style="position: fixed;"></div>
<div id="content" style="position: relative;"></div>
Now both elements are positioned; in which case, the element at the bottom (in source order) will cover element above it (in source order).
Add a z-index
on header; 1
should be sufficient.
Python IndentationError unindent does not match any outer indentation level
# usr/bin/bash -tt
or
# usr/bin/python -tt
I Don't know what do you mean exactly, but technially speaking, this is not possible without a loop.
May be you mean using a LINQ, like for example:
list.Where(x=>x.Title == title)
It's worth mentioning that the iteration over is not skipped, but simply wrapped into the LINQ query.
Hope this helps.
EDIT
In other words if you really concerned about performance, keep coding the way you already doing. Otherwise choose LINQ for more concise and clear syntax.
These methods are in ObjectNode
: the division is such that most read operations are included in JsonNode
, but mutations in ObjectNode
and ArrayNode
.
Note that you can just change first line to be:
ObjectNode jNode = mapper.createObjectNode();
// version ObjectMapper has should return ObjectNode type
or
ObjectNode jNode = (ObjectNode) objectCodec.createObjectNode();
// ObjectCodec is in core part, must be of type JsonNode so need cast
Use these codes for 404 not found.
if(strstr($_SERVER['REQUEST_URI'],'index.php')){
header('HTTP/1.0 404 Not Found');
readfile('404missing.html');
exit();
}
Here 404missing.html is your Not found design page. (it can be .html or .php)
SELECT *,
ROW_NUMBER()OVER(ORDER BY CASE WHEN ISNUMERIC (ID)=1 THEN CONVERT(NUMERIC(20,2),SUBSTRING(Id, PATINDEX('%[0-9]%', Id), LEN(Id)))END DESC)Rn ---- numerical
FROM
(
SELECT '1'Id UNION ALL
SELECT '25.20' Id UNION ALL
SELECT 'A115' Id UNION ALL
SELECT '2541' Id UNION ALL
SELECT '571.50' Id UNION ALL
SELECT '67' Id UNION ALL
SELECT 'B48' Id UNION ALL
SELECT '500' Id UNION ALL
SELECT '147.54' Id UNION ALL
SELECT 'A-100' Id
)A
ORDER BY
CASE WHEN ISNUMERIC (ID)=0 /* alphabetical sort */
THEN CASE WHEN PATINDEX('%[0-9]%', Id)=0
THEN LEFT(Id,PATINDEX('%[0-9]%',Id))
ELSE LEFT(Id,PATINDEX('%[0-9]%',Id)-1)
END
END DESC
if your array looks like
array = [
{:name => "Hitesh" , :age => 27 , :place => "xyz"} ,
{:name => "John" , :age => 26 , :place => "xtz"} ,
{:name => "Anil" , :age => 26 , :place => "xsz"}
]
And you Want To know if some value is already present in your array. Use Find Method
array.find {|x| x[:name] == "Hitesh"}
This will return object if Hitesh is present in name otherwise return nil
I am working with a Python code for a REST API, so this is for those who are working on similar projects.
I extract data from an URL using a POST request and the raw output is JSON. For some reason the output is already a dictionary, not a list, and I'm able to refer to the nested dictionary keys right away, like this:
datapoint_1 = json1_data['datapoints']['datapoint_1']
where datapoint_1 is inside the datapoints dictionary.
The simplest solution is to go to your XML layout containing your webview. Change your android:layout_width and android:layout_height from "wrap_content" to "match_parent".
<WebView
android:layout_width="match_parent"
android:layout_height="match_parent"
android:id="@+id/webView"/>
Another option is to use
#include <process.h>
system("pause");
Though this is not very portable because it will only work on Windows, but it will automatically print
Press any key to continue...
Just for people using VS2019, I think other answers are also pointing out same location.
Get the router from the container.
$router = $this->get('router');
Then use the router to generate the Url
$uri = $router->generate('blog_show', array('slug' => 'my-blog-post'));
For some reason none of the above answers seemed to be addressing the case of the real first and only first child of the parent.
#element_id > .class_name:first-child
All the above answers will fail if you want to apply the style to only the first class child within this code.
<aside id="element_id">
Content
<div class="class_name">First content that need to be styled</div>
<div class="class_name">
Second content that don't need to be styled
<div>
<div>
<div class="class_name">deep content - no style</div>
<div class="class_name">deep content - no style</div>
<div>
<div class="class_name">deep content - no style</div>
</div>
</div>
</div>
</div>
</aside>
foreach over a statement is just a syntax sugar for the regular one-way fetch() loop. If you want to loop over your data more than once, select it as a regular array first
$sql = "SELECT * FROM users";
$stm = $dbh->query($sql);
// here you go:
$users = $stm->fetchAll();
foreach ($users as $row) {
print $row["name"] . "-" . $row["sex"] ."<br/>";
}
echo "<br/>";
foreach ($users as $row) {
print $row["name"] . "-" . $row["sex"] ."<br/>";
}
Also quit that try..catch
thing. Don't use it, but set the proper error reporting for PHP and PDO
Entity-Framework Select Distinct Name:
Suppose if you are using Views in which you are using multiple tables and you want to apply distinct in that case first you have to store value in variable & then you can apply Distinct on that variable like this one....
public List<Item_Img_Sal_VIEW> GetItemDescription(int ItemNo)
{
var Result= db.Item_Img_Sal_VIEW.Where(p => p.ItemID == ItemNo).ToList();
return Result.Distinct().ToList();
}
Or you can try this Simple Example
Public Function GetUniqueLocation() As List(Of Integer)
Return db.LoginUsers.Select(Function(p) p.LocID).Distinct().ToList()
End Function
Very easy method, you rotate one way, and the contents the other. Requires a square though
#element{
background : url('someImage.jpg');
}
#element:hover{
transform: rotate(-30deg);
}
#element:hover >*{
transform: rotate(30deg);
}
Do you use the input type="file" to choose the uploadfiles? if so, why not use the accept attribute?
<input type="file" name="myImage" accept="image/x-png,image/gif,image/jpeg" />
Use the SqlDataAdapter, this would simplify everything.
//Your code to this point
DataTable dt = new DataTable();
using(var cmd = new SqlCommand("usp_GetABCD", sqlcon))
{
using(var da = new SqlDataAdapter(cmd))
{
da.Fill(dt):
}
}
and your DataTable will have the information you are looking for, so long as your stored proceedure returns a data set (cursor).
Use the below code
val hidePasswordMethod = PasswordTransformationMethod()
showOrHidePasswordButton.setOnClickListener {
passwordEditText.apply {
transformationMethod =
if (transformationMethod is PasswordTransformationMethod)
null //shows password
else
hidePasswordMethod //hides password
}
}
and make sure you add this to your password edittext in layout
android:inputType="textPassword"
Click File > Preferences > Keyboard Shortcuts:
Search for copyLinesDownAction
or copyLinesUpAction
in your keyboard shortcuts
Usually it is SHIFT+ALT + ?
Update for Ubuntu:
It seems that Ubuntu is hiding that shortcut from being seen by VSCode (i.e. it uses it probably by its own). There is an issue about that on GitHub.
In order to work in Ubuntu you will have to define your own shortcut, e.g. to copy the line using ctrl+shift+alt+j and CTRL +SHIFT + ALT + k you could use a keybindings.json
like this:
[
{ "key": "ctrl+shift+alt+j", "command": "editor.action.copyLinesDownAction",
"when": "editorTextFocus && !editorReadonly" },
{ "key": "ctrl+shift+alt+k", "command": "editor.action.copyLinesUpAction",
"when": "editorTextFocus && !editorReadonly" }
]
Just do a require('./yourfile.js');
Declare all the variables that you want outside access as global variables. So instead of
var a = "hello"
it will be
GLOBAL.a="hello"
or just
a = "hello"
This is obviously bad. You don't want to be polluting the global scope.
Instead the suggest method is to export
your functions/variables.
If you want the MVC pattern take a look at Geddy.
The following is OK in HTML4, but not in XHTML. Check your editor.
<input type=button value="Submit" />
Another take on this (heavily derived from solutions above) but
tested with python 2.7 and 3.6.5
#!/usr/bin/python2.7
# you'll have to adjust for your setup, e.g., #!/usr/bin/python3
import base64, re
from Crypto.Cipher import AES
from Crypto import Random
from django.conf import settings
class AESCipher:
"""
Usage:
aes = AESCipher( settings.SECRET_KEY[:16], 32)
encryp_msg = aes.encrypt( 'ppppppppppppppppppppppppppppppppppppppppppppppppppppppp' )
msg = aes.decrypt( encryp_msg )
print("'{}'".format(msg))
"""
def __init__(self, key, blk_sz):
self.key = key
self.blk_sz = blk_sz
def encrypt( self, raw ):
if raw is None or len(raw) == 0:
raise NameError("No value given to encrypt")
raw = raw + '\0' * (self.blk_sz - len(raw) % self.blk_sz)
raw = raw.encode('utf-8')
iv = Random.new().read( AES.block_size )
cipher = AES.new( self.key.encode('utf-8'), AES.MODE_CBC, iv )
return base64.b64encode( iv + cipher.encrypt( raw ) ).decode('utf-8')
def decrypt( self, enc ):
if enc is None or len(enc) == 0:
raise NameError("No value given to decrypt")
enc = base64.b64decode(enc)
iv = enc[:16]
cipher = AES.new(self.key.encode('utf-8'), AES.MODE_CBC, iv )
return re.sub(b'\x00*$', b'', cipher.decrypt( enc[16:])).decode('utf-8')
Instead of a button, put a link and navigate it to another page
<a href="logout.php">Logout</a>
Then in logout.php
page, use
session_start();
session_destroy();
header('Location: login.php');
exit;
To convert existing tabs to spaces, press Edit->Blank Operations->TAB to Space
.
If in the future you want to enter spaces instead of tab when you press tab key:
Settings->Preferences...->Language
(since version 7.1) or Settings->Preferences...->Tab Settings
(previous versions)Replace by space
Tab size
field.You must set your query base to the DN of the user in question, then set your filter to the DN of the group you're wondering if they're a member of. To see if jdoe is a member of the office group then your query will look something like this:
ldapsearch -x -D "ldap_user" -w "user_passwd" -b "cn=jdoe,dc=example,dc=local" -h ldap_host '(memberof=cn=officegroup,dc=example,dc=local)'
If you want to see ALL the groups he's a member of, just request only the 'memberof' attribute in your search, like this:
ldapsearch -x -D "ldap_user" -w "user_passwd" -b "cn=jdoe,dc=example,dc=local" -h ldap_host **memberof**
think works
Criteria criteria = getSession().createCriteria(clazz);
Criterion rest1= Restrictions.and(Restrictions.eq(A, "X"),
Restrictions.in("B", Arrays.asList("X",Y)));
Criterion rest2= Restrictions.and(Restrictions.eq(A, "Y"),
Restrictions.eq(B, "Z"));
criteria.add(Restrictions.or(rest1, rest2));
The two forms are the same with one exception: temporarily, the new (Object *)
has an undefined value when the creation and assignment are separate. The compiler may combine them back together, since the undefined pointer is not particularly useful. This does not relate to global variables (unless the declaration is global, in which case it's still true for both forms).
I would do it like this:
int totalMinutes = (int)(end - start).TotalMinutes;
[^,;]+
You haven't specified the regex implementation you are using. Most of them have a Split
method that takes delimiters and split by them. You might want to use that one with a "normal" (without ^
) character class:
[,;]+
I found that the WebClient kept removing my User-Agent header after one request and I was tired of setting it each time. I used a hack to set the User-Agent permanently by making my own custom WebClient and overriding the GetWebRequest method. Hope this helps.
public class CustomWebClient : WebClient
{
public CustomWebClient(){}
protected override WebRequest GetWebRequest(Uri address)
{
var request = base.GetWebRequest(address) as HttpWebRequest;
request.UserAgent="Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; WOW64; Trident/6.0;)";
//... your other custom code...
return request;
}
}
Expanding on Abdul's answer, you can obtain a KeyedTuple
instead of a discrete collection of rows by joining the columns:
q = Session.query(*User.__table__.columns + Document.__table__.columns).\
select_from(User).\
join(Document, User.email == Document.author).\
filter(User.email == 'someemail').all()
You can always use a background image to do it too. I tend to vote for this option 100% of the time as the only other perfect solution is the Jquery option.
As with using the outer div with a background color you'll end up having to have the content in both divs reaching the same height.
The following cites the C11 standard (final draft).
6.3.1.2: When any scalar value is converted to _Bool, the result is 0 if the value compares equal to 0; otherwise, the result is 1.
bool
(mapped by stdbool.h
to the internal name _Bool
for C) itself is an unsigned integer type:
... The type _Bool and the unsigned integer types that correspond to the standard signed integer types are the standard unsigned integer types.
According to 6.2.5p2:
An object declared as type _Bool is large enough to store the values 0 and 1.
AFAIK these definitions are semantically identical to C++ - with the minor difference of the built-in(!) names. bool
for C++ and _Bool
for C.
Note that C does not use the term rvalues as C++ does. However, in C pointers are scalars, so assigning a pointer to a _Bool
behaves as in C++.
In VS 2005/2008 you can use private accessor to test private member,but this way was disappear in later version of VS
A bit late to the game for this question, but in recent changes introduced in C# 7 (Available by default in Visual Studio 2017/.NET Framework 4.6.2), range-based switching is now possible with the switch
statement.
Example:
int i = 63;
switch (i)
{
case int n when (n >= 100):
Console.WriteLine($"I am 100 or above: {n}");
break;
case int n when (n < 100 && n >= 50 ):
Console.WriteLine($"I am between 99 and 50: {n}");
break;
case int n when (n < 50):
Console.WriteLine($"I am less than 50: {n}");
break;
}
Notes:
(
and )
are not required in the when
condition, but are used in this example to highlight the comparison(s). var
may also be used in lieu of int
. For example: case var n when n >= 100:
.Try This:
sqlplus -s ${ORA_CONN_STR} <<EOF >/dev/null
Zcron is available free for personal use.
You need add -> contentType: "application/json; charset=utf-8",
<script type="text/javascript">
$(document).ready( function() {
$('#btnTest').click( function() {
$.ajax({
type: "POST",
url: "/Login/Test",
data: { ListID: '1', ItemName: 'test' },
dataType: "json",
contentType: "application/json; charset=utf-8",
success: function(response) { alert(response); },
error: function(xhr, ajaxOptions, thrownError) { alert(xhr.responseText); }
});
});
});
</script>
You can use canvas2image to prompt for download.
I had the same issue, here's a simple example that both adds the image to the page and forces the browser to download it:
<html>
<head>
<script src="http://hongru.github.io/proj/canvas2image/canvas2image.js"></script>
<script>
function draw(){
var canvas = document.getElementById("thecanvas");
var ctx = canvas.getContext("2d");
ctx.fillStyle = "rgba(125, 46, 138, 0.5)";
ctx.fillRect(25,25,100,100);
ctx.fillStyle = "rgba( 0, 146, 38, 0.5)";
ctx.fillRect(58, 74, 125, 100);
}
function to_image(){
var canvas = document.getElementById("thecanvas");
document.getElementById("theimage").src = canvas.toDataURL();
Canvas2Image.saveAsPNG(canvas);
}
</script>
</head>
<body onload="draw()">
<canvas width=200 height=200 id="thecanvas"></canvas>
<div><button onclick="to_image()">Draw to Image</button></div>
<image id="theimage"></image>
</body>
</html>
Convert ArrayList to JsonArray : Like these [{"title":"value1"}, {"title":"value2"}]
Example below :
Model class having one param title and override toString method
class Model(
var title: String,
var id: Int = -1
){
override fun toString(): String {
return "{\"title\":\"$title\"}"
}
}
create List of model class and print toString
var list: ArrayList<Model>()
list.add("value1")
list.add("value2")
Log.d(TAG, list.toString())
and Here is your output
[{"title":"value1"}, {"title":"value2"}]
Try putting opacity:0; your select element will be invisible but the options will be visible when you click on it.
As mentioned in the comments, conda support for jupyter notebooks is needed to switch kernels. Seems like this support is now available through conda itself (rather than relying on pip). http://docs.continuum.io/anaconda/user-guide/tasks/use-jupyter-notebook-extensions/
conda install nb_conda
which brings three other handy extensions in addition to Notebook Conda Kernels.
Try this one from Codeproject (credit to Nitron):
I think it's the same dialog you're talking about - maybe it would help if you add a screenshot?
bool GetFolder(std::string& folderpath, const char* szCaption=NULL, HWND hOwner=NULL)
{
bool retVal = false;
// The BROWSEINFO struct tells the shell how it should display the dialog.
BROWSEINFO bi;
memset(&bi, 0, sizeof(bi));
bi.ulFlags = BIF_USENEWUI;
bi.hwndOwner = hOwner;
bi.lpszTitle = szCaption;
// must call this if using BIF_USENEWUI
::OleInitialize(NULL);
// Show the dialog and get the itemIDList for the selected folder.
LPITEMIDLIST pIDL = ::SHBrowseForFolder(&bi);
if(pIDL != NULL)
{
// Create a buffer to store the path, then get the path.
char buffer[_MAX_PATH] = {'\0'};
if(::SHGetPathFromIDList(pIDL, buffer) != 0)
{
// Set the string value.
folderpath = buffer;
retVal = true;
}
// free the item id list
CoTaskMemFree(pIDL);
}
::OleUninitialize();
return retVal;
}
mysql -u <USERNAME> -p <DB NAME> < <dump file path>
-u
- for Username
-p
- to prompt the Password
Eg. mysql -u root -p mydb < /home/db_backup.sql
You can also provide password preceded by -p but for the security reasons it is not suggestible. The password will appear on the command itself rather masked.
from superuser accepted answer:
sudo mysql -u root
use mysql;
update user set plugin='' where User='root';
flush privileges;
exit;
Had forgotten this issue... I was actually asking with Eclipse, sorry for not stating that originally. And the answer seems to be too simple (at least with 3.5; probably with older versions also):
Java run configuration's Arguments : VM arguments:
-Djava.library.path="${workspace_loc:project}\lib;${env_var:PATH}"
Must not forget the quotation marks, otherwise there are problems with spaces in PATH.
WHERE clause can be used with SELECT, INSERT, and UPDATE statements, whereas HAVING can be used only with SELECT statement.
WHERE filters rows before aggregation (GROUP BY), whereas HAVING filter groups after aggregations are performed.
Aggregate function cannot be used in WHERE clause unless it is in a subquery contained in HAVING clause, whereas aggregate functions can be used in HAVING clause.
The most important difference is that robocopy
will (usually) retry when an error occurs, while xcopy
will not. In most cases, that makes robocopy
far more suitable for use in a script.
Addendum: for completeness, there is one known edge case issue with robocopy; it may silently fail to copy files or directories whose names contain invalid UTF-16 sequences. If that's a problem for you, you may need to look at third-party tools, or write your own.
If the machine you are on is part of the AD domain, it should have its name servers set to the AD name servers (or hopefully use a DNS server path that will eventually resolve your AD domains). Using your example of dc=domain,dc=com, if you look up domain.com in the AD name servers it will return a list of the IPs of each AD Controller. Example from my company (w/ the domain name changed, but otherwise it's a real example):
mokey 0 /home/jj33 > nslookup example.ad Server: 172.16.2.10 Address: 172.16.2.10#53 Non-authoritative answer: Name: example.ad Address: 172.16.6.2 Name: example.ad Address: 172.16.141.160 Name: example.ad Address: 172.16.7.9 Name: example.ad Address: 172.19.1.14 Name: example.ad Address: 172.19.1.3 Name: example.ad Address: 172.19.1.11 Name: example.ad Address: 172.16.3.2
Note I'm actually making the query from a non-AD machine, but our unix name servers know to send queries for our AD domain (example.ad) over to the AD DNS servers.
I'm sure there's a super-slick windowsy way to do this, but I like using the DNS method when I need to find the LDAP servers from a non-windows server.
If you are calling SOAP web services (for example, using jaxws-maven-plugin
) just by adding this dependency all JAXB errors disappear:
<dependency>
<groupId>org.glassfish.metro</groupId>
<artifactId>webservices-rt</artifactId>
<version>2.4.3</version>
</dependency>
Tested with Java 13
Using \b
can yield surprising results. You would be better off figuring out what separates a word from its definition and incorporating that information into your pattern.
#!/usr/bin/perl
use strict; use warnings;
use re 'debug';
my $str = 'S.P.E.C.T.R.E. (Special Executive for Counter-intelligence,
Terrorism, Revenge and Extortion) is a fictional global terrorist
organisation';
my $word = 'S.P.E.C.T.R.E.';
if ( $str =~ /\b(\Q$word\E)\b/ ) {
print $1, "\n";
}
Output:
Compiling REx "\b(S\.P\.E\.C\.T\.R\.E\.)\b" Final program: 1: BOUND (2) 2: OPEN1 (4) 4: EXACT (9) 9: CLOSE1 (11) 11: BOUND (12) 12: END (0) anchored "S.P.E.C.T.R.E." at 0 (checking anchored) stclass BOUND minlen 14 Guessing start of match in sv for REx "\b(S\.P\.E\.C\.T\.R\.E\.)\b" against "S.P .E.C.T.R.E. (Special Executive for Counter-intelligence,"... Found anchored substr "S.P.E.C.T.R.E." at offset 0... start_shift: 0 check_at: 0 s: 0 endpos: 1 Does not contradict STCLASS... Guessed: match at offset 0 Matching REx "\b(S\.P\.E\.C\.T\.R\.E\.)\b" against "S.P.E.C.T.R.E. (Special Exec utive for Counter-intelligence,"... 0 | 1:BOUND(2) 0 | 2:OPEN1(4) 0 | 4:EXACT (9) 14 | 9:CLOSE1(11) 14 | 11:BOUND(12) failed... Match failed Freeing REx: "\b(S\.P\.E\.C\.T\.R\.E\.)\b"
I recommend to use SZTextView
.
https://github.com/glaszig/SZTextView
Add your default UITextView
from storyboard
and then change its custom class to SZTextView
like below
Then you will see two new option in the Attribute Inspector
write.csv([enter name of dataframe here],file = file.choose(new = T))
After running above script this window will open :
Type the new file name with extension in the File name field and click Open, it'll ask you to create a new file to which you should select Yes and the file will be created and saved in the desired location.
You can do this by giving both View
s a layout_width
of 0dp
and a layout_weight
of 1
:
<LinearLayout
android:layout_width="match_parent"
android:layout_height="wrap_content">
<Button
android:layout_width="0dp"
android:layout_height="wrap_content"
android:layout_weight="1"/>
<TextView
android:layout_width="0dp"
android:text="example text"
android:layout_height="wrap_content"
android:layout_weight="1"/>
</LinearLayout>
The way android layout_weight works is that:
match_parent
then it will divide the space that is left in the ratio of the layout_weight
s. Thus if you gave the Views layout_weight="2"
and layout_weight="1"
,the resultant ratio will be 2 to 1,that is : the first View will get 2/3 of the space that is left and the other view 1/3.So that's why if you give layout_width
a size of 0dp
the first step has no added meaning since both Views are not assigned any space. Then only the second point decides the space each View
gets, thus giving the View
s the space you specified according to the ratio!
To explain why 0dp
causes the space to devide equally by providing an example that shows the opposite: The code below would result in something different since example text
now has a width that is greater than 0dp
because it has wrap_content
instead making the free space left to divide less than 100% because the text takes space. The result will be that they do get 50% of the free space left but the text already took some space so the TextView
will have well over 50% of the total space.
<LinearLayout
android:layout_width="match_parent"
android:layout_height="wrap_content">
<Button
android:layout_width="0dp"
android:layout_height="wrap_content"
android:layout_weight="1"/>
<TextView
android:layout_width="wrap_content"
android:text="example text"
android:layout_height="wrap_content"
android:layout_weight="1"/>
</LinearLayout>
The gitlab has a lot of tokens:
I tested only the Personal Access Token using GitLab Community Edition 10.1.2, the example:
git clone https://gitlab-ci-token:${Personal Access Tokens}@gitlab.com/username/myrepo.git
git clone https://oauth2:${Personal Access Tokens}@gitlab.com/username/myrepo.git
or using username and password:
git clone https://${username}:${password}@gitlab.com/username/myrepo.git
or by input your password:
git clone https://${username}@gitlab.com/username/myrepo.git
But the private token seems can not work.
If you don't have the -T
option for dmesg
as for example on Andoid, you can use the busybox
version. The following solves also some other issues:
[0.0000]
format is preceded by something that looks like misplaced color information, prefixes like <6>
. It is inspired by this blog post.
#!/bin/sh
# Translate dmesg timestamps to human readable format
# uptime in seconds
uptime=$(cut -d " " -f 1 /proc/uptime)
# remove fraction
uptime=$(echo $uptime | cut -d "." -f1)
# run only if timestamps are enabled
if [ "Y" = "$(cat /sys/module/printk/parameters/time)" ]; then
dmesg | sed "s/[^\[]*\[/\[/" | sed "s/^\[[ ]*\?\([0-9.]*\)\] \(.*\)/\\1 \\2/" | while read timestamp message; do
timestamp=$(echo $timestamp | cut -d "." -f1)
ts1=$(( $(busybox date +%s) - $uptime + $timestamp ))
ts2=$(busybox date -d "@${ts1}")
printf "[%s] %s\n" "$ts2" "$message"
done
else
echo "Timestamps are disabled (/sys/module/printk/parameters/time)"
fi
Note, however, that this implementation is quite slow.
A generic answer on how to handle click
events with KnockoutJS...
Not a straight up answer to the question as asked, but probably an answer to the question most Googlers landing here have: use the click
binding from KnockoutJS instead of onclick
. Like this:
function Item(parent, txt) {_x000D_
var self = this;_x000D_
_x000D_
self.doStuff = function(data, event) {_x000D_
console.log(data, event);_x000D_
parent.log(parent.log() + "\n data = " + ko.toJSON(data));_x000D_
};_x000D_
_x000D_
self.doOtherStuff = function(customParam, data, event) {_x000D_
console.log(data, event);_x000D_
parent.log(parent.log() + "\n data = " + ko.toJSON(data) + ", customParam = " + customParam);_x000D_
};_x000D_
_x000D_
self.txt = ko.observable(txt);_x000D_
}_x000D_
_x000D_
function RootVm(items) {_x000D_
var self = this;_x000D_
_x000D_
self.doParentStuff = function(data, event) {_x000D_
console.log(data, event);_x000D_
self.log(self.log() + "\n data = " + ko.toJSON(data));_x000D_
};_x000D_
_x000D_
self.items = ko.observableArray([_x000D_
new Item(self, "John Doe"),_x000D_
new Item(self, "Marcus Aurelius")_x000D_
]);_x000D_
self.log = ko.observable("Started logging...");_x000D_
}_x000D_
_x000D_
ko.applyBindings(new RootVm());
_x000D_
.parent { background: rgba(150, 150, 200, 0.5); padding: 2px; margin: 5px; }_x000D_
button { margin: 2px 0; font-family: consolas; font-size: 11px; }_x000D_
pre { background: #eee; border: 1px solid #ccc; padding: 5px; }
_x000D_
<script src="https://cdnjs.cloudflare.com/ajax/libs/knockout/3.4.0/knockout-min.js"></script>_x000D_
_x000D_
<div data-bind="foreach: items">_x000D_
<div class="parent">_x000D_
<span data-bind="text: txt"></span><br>_x000D_
<button data-bind="click: doStuff">click: doStuff</button><br>_x000D_
<button data-bind="click: $parent.doParentStuff">click: $parent.doParentStuff</button><br>_x000D_
<button data-bind="click: $root.doParentStuff">click: $root.doParentStuff</button><br>_x000D_
<button data-bind="click: function(data, event) { $parent.log($parent.log() + '\n data = ' + ko.toJSON(data)); }">click: function(data, event) { $parent.log($parent.log() + '\n data = ' + ko.toJSON(data)); }</button><br>_x000D_
<button data-bind="click: doOtherStuff.bind($data, 'test 123')">click: doOtherStuff.bind($data, 'test 123')</button><br>_x000D_
<button data-bind="click: function(data, event) { doOtherStuff('test 123', $data, event); }">click: function(data, event) { doOtherStuff($data, 'test 123', event); }</button><br>_x000D_
</div>_x000D_
</div>_x000D_
_x000D_
Click log:_x000D_
<pre data-bind="text: log"></pre>
_x000D_
**A note about the actual question...*
The actual question has one interesting bit:
// Uh oh! Modifying the DOM....
place.innerHTML = "somthing"
Don't do that! Don't modify the DOM like that when using an MVVM framework like KnockoutJS, especially not the piece of the DOM that is your own parent. If you would do this the button would disappear (if you replace your parent's innerHTML
you yourself will be gone forever ever!).
Instead, modify the View Model in your handler instead, and have the View respond. For example:
function RootVm() {_x000D_
var self = this;_x000D_
self.buttonWasClickedOnce = ko.observable(false);_x000D_
self.toggle = function(data, event) {_x000D_
self.buttonWasClickedOnce(!self.buttonWasClickedOnce());_x000D_
};_x000D_
}_x000D_
_x000D_
ko.applyBindings(new RootVm());
_x000D_
<script src="https://cdnjs.cloudflare.com/ajax/libs/knockout/3.4.0/knockout-min.js"></script>_x000D_
_x000D_
<div>_x000D_
<div data-bind="visible: !buttonWasClickedOnce()">_x000D_
<button data-bind="click: toggle">Toggle!</button>_x000D_
</div>_x000D_
<div data-bind="visible: buttonWasClickedOnce">_x000D_
Can be made visible with toggle..._x000D_
<button data-bind="click: toggle">Untoggle!</button>_x000D_
</div>_x000D_
</div>
_x000D_
`ALTER TABLE `table_name` CHANGE `column_name`
timestamp NOT NULL DEFAULT CURRENT_TIMESTAMP
ON UPDATE CURRENT_TIMESTAMP
Can be used to update the timestamp on update.
I just tried in place merge algorithm for merge sort in JAVA by using the insertion sort algorithm, using following steps.
1) Two sorted arrays are available.
2) Compare the first values of each array; and place the smallest value into the first array.
3) Place the larger value into the second array by using insertion sort (traverse from left to right).
4) Then again compare the second value of first array and first value of second array, and do the same. But when swapping happens there is some clue on skip comparing the further items, but just swapping required.
I have made some optimization here; to keep lesser comparisons in insertion sort.
The only drawback i found with this solutions is it needs larger swapping of array elements in the second array.
e.g)
First___Array : 3, 7, 8, 9
Second Array : 1, 2, 4, 5
Then 7, 8, 9 makes the second array to swap(move left by one) all its elements by one each time to place himself in the last.
So the assumption here is swapping items is negligible compare to comparing of two items.
https://github.com/skanagavelu/algorithams/blob/master/src/sorting/MergeSort.java
package sorting;
import java.util.Arrays;
public class MergeSort {
public static void main(String[] args) {
int[] array = { 5, 6, 10, 3, 9, 2, 12, 1, 8, 7 };
mergeSort(array, 0, array.length -1);
System.out.println(Arrays.toString(array));
int[] array1 = {4, 7, 2};
System.out.println(Arrays.toString(array1));
mergeSort(array1, 0, array1.length -1);
System.out.println(Arrays.toString(array1));
System.out.println("\n\n");
int[] array2 = {4, 7, 9};
System.out.println(Arrays.toString(array2));
mergeSort(array2, 0, array2.length -1);
System.out.println(Arrays.toString(array2));
System.out.println("\n\n");
int[] array3 = {4, 7, 5};
System.out.println(Arrays.toString(array3));
mergeSort(array3, 0, array3.length -1);
System.out.println(Arrays.toString(array3));
System.out.println("\n\n");
int[] array4 = {7, 4, 2};
System.out.println(Arrays.toString(array4));
mergeSort(array4, 0, array4.length -1);
System.out.println(Arrays.toString(array4));
System.out.println("\n\n");
int[] array5 = {7, 4, 9};
System.out.println(Arrays.toString(array5));
mergeSort(array5, 0, array5.length -1);
System.out.println(Arrays.toString(array5));
System.out.println("\n\n");
int[] array6 = {7, 4, 5};
System.out.println(Arrays.toString(array6));
mergeSort(array6, 0, array6.length -1);
System.out.println(Arrays.toString(array6));
System.out.println("\n\n");
//Handling array of size two
int[] array7 = {7, 4};
System.out.println(Arrays.toString(array7));
mergeSort(array7, 0, array7.length -1);
System.out.println(Arrays.toString(array7));
System.out.println("\n\n");
int input1[] = {1};
int input2[] = {4,2};
int input3[] = {6,2,9};
int input4[] = {6,-1,10,4,11,14,19,12,18};
System.out.println(Arrays.toString(input1));
mergeSort(input1, 0, input1.length-1);
System.out.println(Arrays.toString(input1));
System.out.println("\n\n");
System.out.println(Arrays.toString(input2));
mergeSort(input2, 0, input2.length-1);
System.out.println(Arrays.toString(input2));
System.out.println("\n\n");
System.out.println(Arrays.toString(input3));
mergeSort(input3, 0, input3.length-1);
System.out.println(Arrays.toString(input3));
System.out.println("\n\n");
System.out.println(Arrays.toString(input4));
mergeSort(input4, 0, input4.length-1);
System.out.println(Arrays.toString(input4));
System.out.println("\n\n");
}
private static void mergeSort(int[] array, int p, int r) {
//Both below mid finding is fine.
int mid = (r - p)/2 + p;
int mid1 = (r + p)/2;
if(mid != mid1) {
System.out.println(" Mid is mismatching:" + mid + "/" + mid1+ " for p:"+p+" r:"+r);
}
if(p < r) {
mergeSort(array, p, mid);
mergeSort(array, mid+1, r);
// merge(array, p, mid, r);
inPlaceMerge(array, p, mid, r);
}
}
//Regular merge
private static void merge(int[] array, int p, int mid, int r) {
int lengthOfLeftArray = mid - p + 1; // This is important to add +1.
int lengthOfRightArray = r - mid;
int[] left = new int[lengthOfLeftArray];
int[] right = new int[lengthOfRightArray];
for(int i = p, j = 0; i <= mid; ){
left[j++] = array[i++];
}
for(int i = mid + 1, j = 0; i <= r; ){
right[j++] = array[i++];
}
int i = 0, j = 0;
for(; i < left.length && j < right.length; ) {
if(left[i] < right[j]){
array[p++] = left[i++];
} else {
array[p++] = right[j++];
}
}
while(j < right.length){
array[p++] = right[j++];
}
while(i < left.length){
array[p++] = left[i++];
}
}
//InPlaceMerge no extra array
private static void inPlaceMerge(int[] array, int p, int mid, int r) {
int secondArrayStart = mid+1;
int prevPlaced = mid+1;
int q = mid+1;
while(p < mid+1 && q <= r){
boolean swapped = false;
if(array[p] > array[q]) {
swap(array, p, q);
swapped = true;
}
if(q != secondArrayStart && array[p] > array[secondArrayStart]) {
swap(array, p, secondArrayStart);
swapped = true;
}
//Check swapped value is in right place of second sorted array
if(swapped && secondArrayStart+1 <= r && array[secondArrayStart+1] < array[secondArrayStart]) {
prevPlaced = placeInOrder(array, secondArrayStart, prevPlaced);
}
p++;
if(q < r) { //q+1 <= r) {
q++;
}
}
}
private static int placeInOrder(int[] array, int secondArrayStart, int prevPlaced) {
int i = secondArrayStart;
for(; i < array.length; i++) {
//Simply swap till the prevPlaced position
if(secondArrayStart < prevPlaced) {
swap(array, secondArrayStart, secondArrayStart+1);
secondArrayStart++;
continue;
}
if(array[i] < array[secondArrayStart]) {
swap(array, i, secondArrayStart);
secondArrayStart++;
} else if(i != secondArrayStart && array[i] > array[secondArrayStart]){
break;
}
}
return secondArrayStart;
}
private static void swap(int[] array, int m, int n){
int temp = array[m];
array[m] = array[n];
array[n] = temp;
}
}
None of the above answers helped me with this problem, so here's the solution I found.
The relevant part:
In Ubuntu systems running MySQL 5.7 (and later versions), the root MySQL user is set to authenticate using the auth_socket plugin by default rather than with a password. This allows for some greater security and usability in many cases, but it can also complicate things when you need to allow an external program (e.g., phpMyAdmin) to access the user.
In order to use a password to connect to MySQL as root, you will need to switch its authentication method from auth_socket to mysql_native_password. To do this, open up the MySQL prompt from your terminal:
sudo mysql
Next, check which authentication method each of your MySQL user accounts use with the following command:
SELECT user,authentication_string,plugin,host FROM mysql.user;
Output
+------------------+-------------------------------------------+-----------------------+-----------+ | user | authentication_string | plugin | host | +------------------+-------------------------------------------+-----------------------+-----------+ | root | | auth_socket | localhost | | mysql.session | *THISISNOTAVALIDPASSWORDTHATCANBEUSEDHERE | mysql_native_password | localhost | | mysql.sys | *THISISNOTAVALIDPASSWORDTHATCANBEUSEDHERE | mysql_native_password | localhost | | debian-sys-maint | *CC744277A401A7D25BE1CA89AFF17BF607F876FF | mysql_native_password | localhost | +------------------+-------------------------------------------+-----------------------+-----------+ 4 rows in set (0.00 sec)
In this example, you can see that the root user does in fact authenticate using the auth_socket plugin. To configure the root account to authenticate with a password, run the following ALTER USER command. Be sure to change password to a strong password of your choosing, and note that this command will change the root password you set in Step 2:
ALTER USER 'root'@'localhost' IDENTIFIED WITH mysql_native_password BY 'password';
Then, run FLUSH PRIVILEGES which tells the server to reload the grant tables and put your new changes into effect:
FLUSH PRIVILEGES;
Check the authentication methods employed by each of your users again to confirm that root no longer authenticates using the auth_socket plugin:
SELECT user,authentication_string,plugin,host FROM mysql.user;
Output
+------------------+-------------------------------------------+-----------------------+-----------+ | user | authentication_string | plugin | host | +------------------+-------------------------------------------+-----------------------+-----------+ | root | *3636DACC8616D997782ADD0839F92C1571D6D78F | mysql_native_password | localhost | | mysql.session | *THISISNOTAVALIDPASSWORDTHATCANBEUSEDHERE | mysql_native_password | localhost | | mysql.sys | *THISISNOTAVALIDPASSWORDTHATCANBEUSEDHERE | mysql_native_password | localhost | | debian-sys-maint | *CC744277A401A7D25BE1CA89AFF17BF607F876FF | mysql_native_password | localhost | +------------------+-------------------------------------------+-----------------------+-----------+ 4 rows in set (0.00 sec)
You can see in this example output that the root MySQL user now authenticates using a password. Once you confirm this on your own server, you can exit the MySQL shell:
exit
I have tried your code and it works just fine. The file is being created without any problem, this is the code I used (it's your code, I just changed the datasource for testing):
public ActionResult ExportToExcel()
{
var products = new System.Data.DataTable("teste");
products.Columns.Add("col1", typeof(int));
products.Columns.Add("col2", typeof(string));
products.Rows.Add(1, "product 1");
products.Rows.Add(2, "product 2");
products.Rows.Add(3, "product 3");
products.Rows.Add(4, "product 4");
products.Rows.Add(5, "product 5");
products.Rows.Add(6, "product 6");
products.Rows.Add(7, "product 7");
var grid = new GridView();
grid.DataSource = products;
grid.DataBind();
Response.ClearContent();
Response.Buffer = true;
Response.AddHeader("content-disposition", "attachment; filename=MyExcelFile.xls");
Response.ContentType = "application/ms-excel";
Response.Charset = "";
StringWriter sw = new StringWriter();
HtmlTextWriter htw = new HtmlTextWriter(sw);
grid.RenderControl(htw);
Response.Output.Write(sw.ToString());
Response.Flush();
Response.End();
return View("MyView");
}
Escape the percent sign \%
to make it part of your comparison value.
There are potential problems with using document.activeElement. Consider:
<div contentEditable="true">
<div>Some text</div>
<div>Some text</div>
<div>Some text</div>
</div>
If the user focuses on an inner-div, then document.activeElement still references the outer div. You cannot use document.activeElement to determine which of the inner div's has focus.
The following function gets around this, and returns the focused node:
function active_node(){
return window.getSelection().anchorNode;
}
If you would rather get the focused element, use:
function active_element(){
var anchor = window.getSelection().anchorNode;
if(anchor.nodeType == 3){
return anchor.parentNode;
}else if(anchor.nodeType == 1){
return anchor;
}
}
This problem may be occur when there is problem in layout file. In my case I just use wrong way to call method
android:onClick="@={() -> viewModel.showText()}"
instead of
android:onClick="@{() -> viewModel.showText()}"
The accepted answer which was triggering input
event with jQuery didn't work for me. Creating an event and dispatching with native JavaScript did the trick.
$("input")[0].dispatchEvent(new Event("input", { bubbles: true }));
Just for sake of completeness, you can also use the same technique above with excel tables.
In the example below, I'm looking of a text in any cell of a Excel Table named "tblConfig", place in the sheet named Config that normally is set to be hidden. I'm accepting the defaults of the Find method.
Dim list As ListObject
Dim config As Worksheet
Dim cell as Range
Set config = Sheets("Config")
Set list = config.ListObjects("tblConfig")
'search in any cell of the data range of excel table
Set cell = list.DataBodyRange.Find(searchTerm)
If cell Is Nothing Then
'when information is not found
Else
'when information is found
End If
I had a similar problem and google was sending me to this post. My solution was a bit different and less compact, but hopefully this can be useful to someone.
Showing your image with matplotlib.pyplot.imshow is generally a fast way to display 2D data. However this by default labels the axes with the pixel count. If the 2D data you are plotting corresponds to some uniform grid defined by arrays x and y, then you can use matplotlib.pyplot.xticks and matplotlib.pyplot.yticks to label the x and y axes using the values in those arrays. These will associate some labels, corresponding to the actual grid data, to the pixel counts on the axes. And doing this is much faster than using something like pcolor for example.
Here is an attempt at this with your data:
import matplotlib.pyplot as plt
# ... define 2D array hist as you did
plt.imshow(hist, cmap='Reds')
x = np.arange(80,122,2) # the grid to which your data corresponds
nx = x.shape[0]
no_labels = 7 # how many labels to see on axis x
step_x = int(nx / (no_labels - 1)) # step between consecutive labels
x_positions = np.arange(0,nx,step_x) # pixel count at label position
x_labels = x[::step_x] # labels you want to see
plt.xticks(x_positions, x_labels)
# in principle you can do the same for y, but it is not necessary in your case
You could create a class that extends the Tkinter Button
class, that will be specialised to close your window by associating the destroy
method to its command
attribute:
from tkinter import *
class quitButton(Button):
def __init__(self, parent):
Button.__init__(self, parent)
self['text'] = 'Good Bye'
# Command to close the window (the destory method)
self['command'] = parent.destroy
self.pack(side=BOTTOM)
root = Tk()
quitButton(root)
mainloop()
This is the output:
And the reason why your code did not work before:
def close_window ():
# root.destroy()
window.destroy()
I have a slight feeling you might got the root from some other place, since you did window = tk()
.
When you call the destroy on the window
in the Tkinter means destroying the whole application, as your window
(root window) is the main window for the application. IMHO, I think you should change your window
to root
.
from tkinter import *
def close_window():
root.destroy() # destroying the main window
root = Tk()
frame = Frame(root)
frame.pack()
button = Button(frame)
button['text'] ="Good-bye."
button['command'] = close_window
button.pack()
mainloop()
Have a look at this picture: Graphical Projections
The glOrtho
command produces an "Oblique" projection that you see in the bottom row. No matter how far away vertexes are in the z direction, they will not recede into the distance.
I use glOrtho every time I need to do 2D graphics in OpenGL (such as health bars, menus etc) using the following code every time the window is resized:
glMatrixMode(GL_PROJECTION);
glLoadIdentity();
glOrtho(0.0f, windowWidth, windowHeight, 0.0f, 0.0f, 1.0f);
This will remap the OpenGL coordinates into the equivalent pixel values (X going from 0 to windowWidth and Y going from 0 to windowHeight). Note that I've flipped the Y values because OpenGL coordinates start from the bottom left corner of the window. So by flipping, I get a more conventional (0,0) starting at the top left corner of the window rather.
Note that the Z values are clipped from 0 to 1. So be careful when you specify a Z value for your vertex's position, it will be clipped if it falls outside that range. Otherwise if it's inside that range, it will appear to have no effect on the position except for Z tests.
I've found that in 17.09 there is a simplest way to do it within docker container:
$ cat /proc/self/cgroup | head -n 1 | cut -d '/' -f3
4de1c09d3f1979147cd5672571b69abec03d606afcc7bdc54ddb2b69dec3861c
Or like it has already been told, a shorter version with
$ cat /etc/hostname
4de1c09d3f19
Or simply:
$ hostname
4de1c09d3f19
If you are using ajax then (making it as simple as possible)
Add your loading gif image to html and make it hidden (using style in html itself now, you can add it to separate CSS):
<img src="path\to\loading\gif" id="img" style="display:none"/ >
Show the image when button is clicked and hide it again on success function
$('#buttonID').click(function(){
$('#img').show(); //<----here
$.ajax({
....
success:function(result){
$('#img').hide(); //<--- hide again
}
}
Make sure you hide the image on ajax error callbacks too to make sure the gif hides even if the ajax fails.
In addition to @pawelzieba's answer, which definitely is correct, to join two tables, while you can use an INNER JOIN
like this
SELECT * FROM expense INNER JOIN refuel
ON exp_id = expense_id
WHERE refuel_id = 1
via raw query like this -
String rawQuery = "SELECT * FROM " + RefuelTable.TABLE_NAME + " INNER JOIN " + ExpenseTable.TABLE_NAME
+ " ON " + RefuelTable.EXP_ID + " = " + ExpenseTable.ID
+ " WHERE " + RefuelTable.ID + " = " + id;
Cursor c = db.rawQuery(
rawQuery,
null
);
because of SQLite's backward compatible support of the primitive way of querying, we turn that command into this -
SELECT *
FROM expense, refuel
WHERE exp_id = expense_id AND refuel_id = 1
and hence be able to take advanatage of the SQLiteDatabase.query() helper method
Cursor c = db.query(
RefuelTable.TABLE_NAME + " , " + ExpenseTable.TABLE_NAME,
Utils.concat(RefuelTable.PROJECTION, ExpenseTable.PROJECTION),
RefuelTable.EXP_ID + " = " + ExpenseTable.ID + " AND " + RefuelTable.ID + " = " + id,
null,
null,
null,
null
);
For a detailed blog post check this http://blog.championswimmer.in/2015/12/doing-a-table-join-in-android-without-using-rawquery
I suggest the following change
let propertyName = {} as any;
First note that with numpy's broadcasting operations it's usually not necessary to duplicate rows and columns. See this and this for descriptions.
But to do this, repeat and newaxis are probably the best way
In [12]: x = array([1,2,3])
In [13]: repeat(x[:,newaxis], 3, 1)
Out[13]:
array([[1, 1, 1],
[2, 2, 2],
[3, 3, 3]])
In [14]: repeat(x[newaxis,:], 3, 0)
Out[14]:
array([[1, 2, 3],
[1, 2, 3],
[1, 2, 3]])
This example is for a row vector, but applying this to a column vector is hopefully obvious. repeat seems to spell this well, but you can also do it via multiplication as in your example
In [15]: x = array([[1, 2, 3]]) # note the double brackets
In [16]: (ones((3,1))*x).transpose()
Out[16]:
array([[ 1., 1., 1.],
[ 2., 2., 2.],
[ 3., 3., 3.]])
You're nearly there, just take out the EXECUTE:
DECLARE
procId NUMBER;
BEGIN
PKG1.INIT(1143824, 0, procId);
DBMS_OUTPUT.PUT_LINE(procId);
END;
Yes, there are several ways to do it. For instance, you can convert the list to a string and then remove the first and last characters:
l = ['a', 2, 'c']
print str(l)[1:-1]
'a', 2, 'c'
If your list contains only strings and you want remove the quotes too then you can use the join
method as has already been said.
You can prefix the argument in orderBy
with a '-' to have descending order instead of ascending. I would write it like this:
<div class="recent"
ng-repeat="reader in book.reader | orderBy: '-created_at' | limitTo: 1">
</div>
This is also stated in the documentation for the filter orderBy.
You can use https://appery.io/ It is the same phonegap but in very convinient wrapper
A regular expression does not account for UTF-8 characters by default. The \s
meta-character only accounts for the original latin set. Therefore, the following command only removes tabs, spaces, carriage returns and new lines
// http://stackoverflow.com/a/1279798/54964
$str=preg_replace('/\s+/', '', $str);
With UTF-8 becoming mainstream this expression will more frequently fail/halt when it reaches the new utf-8 characters, leaving white spaces behind that the \s
cannot account for.
To deal with the new types of white spaces introduced in unicode/utf-8, a more extensive string is required to match and removed modern white space.
Because regular expressions by default do not recognize multi-byte characters, only a delimited meta string can be used to identify them, to prevent the byte segments from being alters in other utf-8 characters (\x80
in the quad set could replace all \x80
sub-bytes in smart quotes)
$cleanedstr = preg_replace(
"/(\t|\n|\v|\f|\r| |\xC2\x85|\xc2\xa0|\xe1\xa0\x8e|\xe2\x80[\x80-\x8D]|\xe2\x80\xa8|\xe2\x80\xa9|\xe2\x80\xaF|\xe2\x81\x9f|\xe2\x81\xa0|\xe3\x80\x80|\xef\xbb\xbf)+/",
"_",
$str
);
This accounts for and removes tabs, newlines, vertical tabs, formfeeds, carriage returns, spaces, and additionally from here:
nextline, non-breaking spaces, mongolian vowel separator, [en quad, em quad, en space, em space, three-per-em space, four-per-em space, six-per-em space, figure space, punctuation space, thin space, hair space, zero width space, zero width non-joiner, zero width joiner], line separator, paragraph separator, narrow no-break space, medium mathematical space, word joiner, ideographical space, and the zero width non-breaking space.
Many of these wreak havoc in xml files when exported from automated tools or sites which foul up text searches, recognition, and can be pasted invisibly into PHP source code which causes the parser to jump to next command (paragraph and line separators) which causes lines of code to be skipped resulting in intermittent, unexplained errors that we have begun referring to as "textually transmitted diseases"
[Its not safe to copy and paste from the web anymore. Use a character scanner to protect your code. lol]
There isn't a direct 1:1 equivalent.
You can password protect a folder or file using file system permissions. If you are using ASP.Net you can also use some of its built in functions to protect various urls.
If you are trying to port .htaccess files used for url rewriting, check out ISAPI Rewrite: http://www.isapirewrite.com/
Make sure you make it as a separate component I have used tabler-react
import * as React from "react";
import { Page, Button } from "tabler-react";
class PaginateComponent extends React.Component {
constructor(props) {
super(props);
this.state = {
array: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10],
limit: 5, // optional
page: 1
};
}
paginateValue = (page) => {
this.setState({ page: page });
console.log(page) // access this value from parent component
}
paginatePrevValue = (page) => {
this.setState({ page: page });
console.log(page) // access this value from parent component
}
paginateNxtValue = (page) => {
this.setState({ page: page });
console.log(page) // access this value from parent component
}
render() {
return (
<div>
<div>
<Button.List>
<Button
disabled={this.state.page === 0}
onClick={() => this.paginatePrevValue(this.state.page - 1)}
outline
color="primary"
>
Previous
</Button>
{this.state.array.map((value, index) => {
return (
<Button
onClick={() => this.paginateValue(value)}
color={
this.state.page === value
? "primary"
: "secondary"
}
>
{value}
</Button>
);
})}
<Button
onClick={() => this.paginateNxtValue(this.state.page + 1)}
outline
color="secondary"
>
Next
</Button>
</Button.List>
</div>
</div>
)
}
}
export default PaginateComponent;
I overcame this by checking-out a new branch like this :
# git checkout -b newbranch <SHA of master>
# git branch
* newbranch
master
# git push -u <repo_url_alias> newbranch
You are left with 2 branch : Master and newbranch , that you can manage to merge later.
A oneliner for the windows 7 users:
(echo install: --no-document && echo update: --no-document) >> c:\ProgramData\gemrc
Let me know if this works. Way to detect an Apple device (Mac computers, iPhones, etc.) with help from StackOverflow.com:
What is the list of possible values for navigator.platform as of today?
var deviceDetect = navigator.platform;
var appleDevicesArr = ['MacIntel', 'MacPPC', 'Mac68K', 'Macintosh', 'iPhone',
'iPod', 'iPad', 'iPhone Simulator', 'iPod Simulator', 'iPad Simulator', 'Pike
v7.6 release 92', 'Pike v7.8 release 517'];
// If on Apple device
if(appleDevicesArr.includes(deviceDetect)) {
// Execute code
}
// If NOT on Apple device
else {
// Execute code
}
In latin1 each character is exactly one byte long. In utf8 a character can consist of more than one byte. Consequently utf8 has more characters than latin1 (and the characters they do have in common aren't necessarily represented by the same byte/bytesequence).
This should do the trick:
$($.parseJSON(data.msg)).map(function () {
return $('<option>').val(this.value).text(this.label);
}).appendTo('#combobox');
Here's the distinction between ajax
and getJSON
(from the jQuery documentation):
[getJSON] is a shorthand Ajax function, which is equivalent to:
$.ajax({ url: url, dataType: 'json', data: data, success: callback });
EDIT: To be clear, part of the problem was that the server's response was returning a json object that looked like this:
{
"msg": '[{"value":"1","label":"xyz"}, {"value":"2","label":"abc"}]'
}
...So that msg
property needed to be parsed manually using $.parseJSON()
.
I had the similar problem. This is the stack trace:
Traceback (most recent call last):
File "/usr/local/bin/aws", line 19, in <module> import awscli.clidriver
File "/usr/local/lib/python2.7/dist-packages/awscli/clidriver.py", line 17, in <module> import botocore.session
File "/usr/local/lib/python2.7/dist-packages/botocore/session.py", line 30, in <module> import botocore.credentials
File "/usr/local/lib/python2.7/dist-packages/botocore/credentials.py", line 27, in <module> from dateutil.parser import parse
ImportError: No module named dateutil.parser
I tried to (re-)install dateutil.parser
through all possible ways. It was unsuccessful.
I solved it with
pip3 uninstall awscli
pip3 install awscli
Give this a go:
string format = "{0} / {1} / {2} {3}";
string date = string.Format(format,mon.ToString(),da.ToString(),yer.ToString();
Console.WriteLine(date);
In fact, there's probably a way to format it automatically without even doing it yourself.
Check out http://msdn.microsoft.com/en-us/library/8kb3ddd4.aspx
str="abcdef"
str.index('c') #=> 2 #String matching approach
str=~/c/ #=> 2 #Regexp approach
$~ #=> #<MatchData "c">
Hope it helps. :)
“Editable” packages syntax can be used in requirements.txt
to import packages from a variety of VCS (git, hg, bzr, svn):
-e git://github.com/mozilla/elasticutils.git#egg=elasticutils
Also, it is possible to point to particular commit:
-e git://github.com/mozilla/elasticutils.git@000b14389171a9f0d7d713466b32bc649b0bed8e#egg=elasticutils
Say your model is 'Shop'
class Shop(models.Model):
street = models.CharField(max_length=150)
city = models.CharField(max_length=150)
# some of your models may have explicit ordering
class Meta:
ordering = ('city')
Since you may have the Meta
class ordering
attribute set, you can use order_by()
without parameters to clear any ordering when using distinct()
. See the documentation under order_by
()
If you don’t want any ordering to be applied to a query, not even the default ordering, call order_by() with no parameters.
and distinct()
in the note where it discusses issues with using distinct()
with ordering.
To query your DB, you just have to call:
models.Shop.objects.order_by().values('city').distinct()
It returns a dictionnary
or
models.Shop.objects.order_by().values_list('city').distinct()
This one returns a ValuesListQuerySet
which you can cast to a list
.
You can also add flat=True
to values_list
to flatten the results.
See also: Get distinct values of Queryset by field
The biggest misunderstanding here is the meaning of the words before
and after
. They do not refer to the element itself, but to the content in the element. So element:before
is before the content, and element:after
is after the content, but both are still inside the original element.
The input
element has no content in the CSS view, and so has no :before
or :after
pseudo content. This is true of many other void or replaced elements.
There is no pseudo element referring to outside the element.
In a different universe, these pseudo elements might have been called something else to make this distinction clearer. And someone might even have proposed a pseudo element which is genuinely outside the element. So far, this is not the case in this universe.
this usage may solve your problem.
width: calc(100% - 100px);
<!DOCTYPE html>_x000D_
<html lang="en">_x000D_
_x000D_
<head>_x000D_
<meta charset="UTF-8" />_x000D_
<title>Content with Menu</title>_x000D_
<style>_x000D_
.content .left {_x000D_
float: left;_x000D_
width: 100px;_x000D_
background-color: green;_x000D_
}_x000D_
_x000D_
.content .right {_x000D_
float: left;_x000D_
width: calc(100% - 100px);_x000D_
background-color: red;_x000D_
}_x000D_
</style>_x000D_
</head>_x000D_
_x000D_
<body>_x000D_
<div class="content">_x000D_
<div class="left">_x000D_
<p>Hi, Flo!</p>_x000D_
</div>_x000D_
<div class="right">_x000D_
<p>is</p>_x000D_
<p>this</p>_x000D_
<p>what</p>_x000D_
<p>you are looking for?</p>_x000D_
</div>_x000D_
</div>_x000D_
</body>_x000D_
_x000D_
</html>
_x000D_
Use AppContext. Make sure you create a bean in your context file.
private final static Foo foo = AppContext.getApplicationContext().getBean(Foo.class);
public static void randomMethod() {
foo.doStuff();
}
Summarizing 2 ways to replace strings:
group<-data.frame(group=c("12357e", "12575e", "197e18", "e18947"))
1) Use gsub
group$group.no.e <- gsub("e", "", group$group)
2) Use the stringr
package
group$group.no.e <- str_replace_all(group$group, "e", "")
Both will produce the desire output:
group group.no.e
1 12357e 12357
2 12575e 12575
3 197e18 19718
4 e18947 18947
$date = DateTime::createFromFormat('m-d-Y', '04-15-2013');
$date->modify('+1 day');
echo $date->format('m-d-Y');
Or in PHP 5.4+
echo (DateTime::createFromFormat('m-d-Y', '04-15-2013'))->modify('+1 day')->format('m-d-Y');
reference
I'm assuming in your scenario, an empty string is a string that is truly empty or one that contains all white space.
if(str.strip()):
print("string is not empty")
else:
print("string is empty")
Note this does not check for None