class Program
    {
        static void Main(string[] args)
        {
            Type type = typeof(MyReflectionClass);
            MethodInfo method = type.GetMethod("MyMethod");
            MyReflectionClass c = new MyReflectionClass();
            string result = (string)method.Invoke(c, null);
            Console.WriteLine(result);

        }
    }

    public class MyReflectionClass
    {
        public string MyMethod()
        {
            return DateTime.Now.ToString();
        }
    }

Tab is [HT], or character number 9, in the unicode library.

I use port 465 all the time.

The answer by danorton is outdated. As he and Wikipedia say, port 465 was initially planned for the SMTPS encryption and quickly deprecated 15 years ago. But a lot of ISPs are still using port 465, especially to be in compliance with the current recommendations of RFC 8314, which encourages the use of implicit TLS instead of the use of the STARTTLS command with port 587. (See section 3.3). Using port 465 is the only way to begin an implicitly secure session with an SMTP server that is acting as a mail submission agent (MSA).

Basically, what RFC 8314 recommends is that cleartext email exchanges be abandoned and that all three common IETF mail protocols be used only in implicit TLS sessions for consistency when possible. The recommended secure ports, then, are 465, 993, and 995 for SMTPS, IMAP4S, and POP3S, respectively.

Although RFC 8314 certainly allows the continued use of explicit TLS with port 587 and the STARTTLS command, doing so opens up the mail user agent (MUA, the mail client) to a downgrade attack where a man-in-the-middle intercepts the STARTTLS request to upgrade to TLS security but denies it, thus forcing the session to remain in cleartext.

I dont know why , but "pip install mechanize" didnt work for me . easy install worked anyway . Try this :

sudo easy_install mechanize

if ($name )
{
    #since undef and '' both evaluate to false 
    #this should work only when string is defined and non-empty...
    #unless you're expecting someting like $name="0" which is false.
    #notice though that $name="00" is not false
}

If t is a matrix, you need to use the element-wise multiplication or exponentiation. Note the dot.

x = exp( -t.^2 )

or

x = exp( -t.*t )

Not sure if you can get all the default settings easily, but specifically for the worker dir, it's quite straigt-forward:

from pyspark import SparkFiles
print SparkFiles.getRootDirectory()

Hashmap type Overwrite that key if hashmap key is same key

map.put("1","1111");
map.put("1","2222");

output

key:value
1:2222

Instead of LIKE (which does work as other commenters have suggested), you can alternatively use CHARINDEX:

declare @full varchar(100) = 'abcdefg'
declare @find varchar(100) = 'cde'
if (charindex(@find, @full) > 0)
    print 'exists'

The best solution for me is:

// Add key/value
var dict = new Dictionary<string, string>();
dict.Add("Content-Type", "application/x-www-form-urlencoded");

// Execute post method
using (var response = httpClient.PostAsync(path, new FormUrlEncodedContent(dict))){}

You should check the $GOPATH directory. If there is an empty directory of the package name, go get doesn't download the package from the repository.

For example, If I want to get the github.com/googollee/go-socket.io package from it's github repository, and there is already an empty directory github.com/googollee/go-socket.io in the $GOPATH, go get doesn't download the package and then complains that there is no buildable Go source file in the directory. Delete any empty directory first of all.

Groupby A:

In [0]: grp = df.groupby('A')

Within each group, sum over B and broadcast the values using transform. Then sort by B:

In [1]: grp[['B']].transform(sum).sort('B')
Out[1]:
          B
2 -2.829710
5 -2.829710
1  0.253651
4  0.253651
0  0.551377
3  0.551377

Index the original df by passing the index from above. This will re-order the A values by the aggregate sum of the B values:

In [2]: sort1 = df.ix[grp[['B']].transform(sum).sort('B').index]

In [3]: sort1
Out[3]:
     A         B      C
2  baz -0.528172  False
5  baz -2.301539   True
1  bar -0.611756   True
4  bar  0.865408  False
0  foo  1.624345  False
3  foo -1.072969   True

Finally, sort the 'C' values within groups of 'A' using the sort=False option to preserve the A sort order from step 1:

In [4]: f = lambda x: x.sort('C', ascending=False)

In [5]: sort2 = sort1.groupby('A', sort=False).apply(f)

In [6]: sort2
Out[6]:
         A         B      C
A
baz 5  baz -2.301539   True
    2  baz -0.528172  False
bar 1  bar -0.611756   True
    4  bar  0.865408  False
foo 3  foo -1.072969   True
    0  foo  1.624345  False

Clean up the df index by using reset_index with drop=True:

In [7]: sort2.reset_index(0, drop=True)
Out[7]:
     A         B      C
5  baz -2.301539   True
2  baz -0.528172  False
1  bar -0.611756   True
4  bar  0.865408  False
3  foo -1.072969   True
0  foo  1.624345  False

In case you do have multiple inner/anonymous runnables passed to same handler, and you want to cancel all at same event use

handler.removeCallbacksAndMessages(null);

As per documentation,

Remove any pending posts of callbacks and sent messages whose obj is token. If token is null, all callbacks and messages will be removed.

Depends on the type. You are adding the small overhead of having to make a reference and dereference. For types with a size equal or smaller than pointers that are using the default copy ctor, it would probably be faster to pass by value.

You can use a CSV parser xsv as parsing INI data.

cargo install xsv

$ cat /etc/*release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=16.04
DISTRIB_CODENAME=xenial

$ xsv select -d "=" - <<< "$( cat /etc/*release )" | xsv search --no-headers --select 1 "DISTRIB_CODENAME" | xsv select 2
xenial

or from a file.

$ xsv select -d "=" - file.ini | xsv search --no-headers --select 1 "DISTRIB_CODENAME" | xsv select 2

Just to add to how to use map files. I use chrome for ubuntu and if I go to sources and click on a file, if there is a map file a message comes up telling me that I can view the original file and how to do it.

For the Angular files that I worked with today I click

Ctrl-P and a list of original files comes up in a small window.

I can then browse through the list to view the file that I would like to inspect and check where the issue might be.

Swift 5.3 in XCode 12.2 Playgrounds

Place the cursor wherever in the code the #insertLiteral would have been in earlier versions. Select from the top-menu Editor->Insert Image Literal... and navigate to the file. Click Open.

The file is added to a playground Resource folder and will then appear when the playground is run in whichever view it was positioned when selected.

If a file is already in the playground Bundle, e.g. in /Resources, it can be dragged directly to the required position in the code (where it will be represented by an icon).

cf. Apple help docs give details of this and how to place other colour and file literals.

   /**
     * Assigns the specified char value to each element of the specified array
     * of chars.
     *
     * @param a the array to be filled
     * @param val the value to be stored in all elements of the array
     */
    public static void fill(char[] a, char val) {
        for (int i = 0, len = a.length; i < len; i++)
            a[i] = val;
    }

That's the way Arrays.fill does it.

(I suppose you could drop into JNI and use memset.)

I think the following code will works.

$tos = array('[email protected]', '[email protected]');
foreach ($tos as $to){
    $ok = mail ($to, $subject, $body, $from);
}
if ($ok) {
    echo "Message Send";
} else { 
    echo "Error";
}

You can also just return string if you know that's the only thing the method will ever return. For example:

public string MyActionName() {
  return "Hi there!";
}

Here is my mysql backup script for ubuntu in case it helps someone.

#Mysql back up script

start_time="$(date -u +%s)"

now(){
date +%d-%B-%Y_%H-%M-%S
}

ip(){
/sbin/ifconfig eth0 2>/dev/null|awk '/inet addr:/ {print $2}'|sed 's/addr://'
}

filename="`now`".zip
backupfolder=/path/to/any/folder
fullpathbackupfile=$backupfolder/$filename
db_user=xxx
db_password=xxx
db_name=xxx

printf "\n\n"
printf "******************************\n"
printf "Started Automatic Mysql Backup\n"
printf "******************************\n"
printf "TIME: `now`\n"
printf "IP_ADDRESS: `ip` \n"
printf "DB_SERVER_NAME: DB-SERVER-1\n"

printf "%sBACKUP_FILE_PATH $fullpathbackupfile\n"

printf "Starting Mysql Dump \n"

mysqldump -u $db_user -p$db_password $db_name| pv | zip > $fullpathbackupfile

end_time="$(date -u +%s)"

elapsed=$(($end_time-$start_time))

printf "%sMysql Dump Completed In $elapsed seconds\n"

printf "******************************\n"

PS: Rememember to install pv and zip in your ubuntu

sudo apt install pv
sudo apt install zip

Here is how I set crontab by using crontab -e in ubuntu to run every 6 hours

0 */6 * * * sh /path/to/shfile/backup-mysql.sh >> /path/to/logs/backup-mysql.log 2>&1

Cool thing is it will create a zip file which is easier to unzip from anywhere

In case you have a school server where the pupils worked a lot. You can just clean up the mess by:

delete from user where User != 'root' and User != 'admin';
delete from db where User != 'root' and User != 'admin';

delete from tables_priv;
delete from columns_priv;

flush privileges;

You want java.text.DecimalFormat

With the dynamic keyword, it becomes really easy to parse any object of this kind:

dynamic x = Newtonsoft.Json.JsonConvert.DeserializeObject(jsonString);
var page = x.page;
var total_pages = x.total_pages
var albums = x.albums;
foreach(var album in albums)
{
    var albumName = album.name;

    // Access album data;
}

Delete any or specific file type(for example ".bak") from a path. See demo code below -

class Program
        {
        static void Main(string[] args)
            {

            // Specify the starting folder on the command line, or in 
            TraverseTree(ConfigurationManager.AppSettings["folderPath"]);

            // Specify the starting folder on the command line, or in 
            // Visual Studio in the Project > Properties > Debug pane.
            //TraverseTree(args[0]);

            Console.WriteLine("Press any key");
            Console.ReadKey();
            }

        public static void TraverseTree(string root)
            {

            if (string.IsNullOrWhiteSpace(root))
                return;

            // Data structure to hold names of subfolders to be
            // examined for files.
            Stack<string> dirs = new Stack<string>(20);

            if (!System.IO.Directory.Exists(root))
                {
                return;
                }

            dirs.Push(root);

            while (dirs.Count > 0)
                {
                string currentDir = dirs.Pop();
                string[] subDirs;
                try
                    {
                    subDirs = System.IO.Directory.GetDirectories(currentDir);
                    }

                // An UnauthorizedAccessException exception will be thrown if we do not have
                // discovery permission on a folder or file. It may or may not be acceptable 
                // to ignore the exception and continue enumerating the remaining files and 
                // folders. It is also possible (but unlikely) that a DirectoryNotFound exception 
                // will be raised. This will happen if currentDir has been deleted by
                // another application or thread after our call to Directory.Exists. The 
                // choice of which exceptions to catch depends entirely on the specific task 
                // you are intending to perform and also on how much you know with certainty 
                // about the systems on which this code will run.
                catch (UnauthorizedAccessException e)
                    {
                    Console.WriteLine(e.Message);
                    continue;
                    }
                catch (System.IO.DirectoryNotFoundException e)
                    {
                    Console.WriteLine(e.Message);
                    continue;
                    }

                IEnumerable<FileInfo> files = null;
                try
                    {
                    //get only .bak file
                    var directory = new DirectoryInfo(currentDir);
                    DateTime date = DateTime.Now.AddDays(-15);
                    files = directory.GetFiles("*.bak").Where(file => file.CreationTime <= date);
                    }
                catch (UnauthorizedAccessException e)
                    {
                    Console.WriteLine(e.Message);
                    continue;
                    }
                catch (System.IO.DirectoryNotFoundException e)
                    {
                    Console.WriteLine(e.Message);
                    continue;
                    }

                // Perform the required action on each file here.
                // Modify this block to perform your required task.
                foreach (FileInfo file in files)
                    {
                    try
                        {
                        // Perform whatever action is required in your scenario.
                        file.Delete();
                        Console.WriteLine("{0}: {1}, {2} was successfully deleted.", file.Name, file.Length, file.CreationTime);
                        }
                    catch (System.IO.FileNotFoundException e)
                        {
                        // If file was deleted by a separate application
                        //  or thread since the call to TraverseTree()
                        // then just continue.
                        Console.WriteLine(e.Message);
                        continue;
                        }
                    }

                // Push the subdirectories onto the stack for traversal.
                // This could also be done before handing the files.
                foreach (string str in subDirs)
                    dirs.Push(str);
                }
            }
        }

for more reference - https://msdn.microsoft.com/en-us/library/bb513869.aspx

You can convert a number to a string with n decimal places using the SPRINTF command:

>> x = 1.23;
>> sprintf('%0.6f', x)

ans =

1.230000

>> x = 1.23456789;
>> sprintf('%0.6f', x)

ans =

1.234568

yes... This is for each loop in java.

Generally this loop is become useful when you are retrieving data or object from the database.

Syntex :

for(Object obj : Collection obj)
{
     //Code enter code here
}

Example :

for(User user : userList)
{
     System.out.println("USer NAme :" + user.name);
   // etc etc
}

This is for each loop.

it will incremental by automatically. one by one from collection to USer object data has been filled. and working.

CGI essentially passes the request off to any interpreter that is configured with the web server - This could be Perl, Python, PHP, Ruby, C pretty much anything. Perl was the most common back in the day thats why you often see it in reference to CGI.

CGI is not dead. In fact most large hosting companies run PHP as CGI as opposed to mod_php because it offers user level config and some other things while it is slower than mod_php. Ruby and Python are also typically run as CGI. they key difference here is that a server module runs as part of the actual server software - where as with CGI its totally outside the server The server just uses the CGI module to determine how to pass and recieve data to the outside interpreter.

You do not need to create an element like the < br > tag, or any other spacer tag. What you should do is apply a style to the element that needs spacing around it.

Let's say the element you want to have space around is a DIV tag called "myelement".

<div class="myelement">
    I am content that needs spacing around it!
</div>

This is the style you would need to use.

 .myelement {
  clear:left;
  height:25px;
  margin: 20px;  // See below for explanation of this
 }

This is the style you can use to better understand CSS for beginners

.myelement {
  clear:left;
  height:25px;
  margin-top:20px;
  margin-right:20px;
  margin-bottom:20px;
  margin-left:20px;
 }

Also, avoid using the height: CSS property until you know what you are doing. You will run into some issues when using height that are harder to troubleshoot as a beginner.

If the CSV file must be imported as part of a python program, then for simplicity and efficiency, you could use os.system along the lines suggested by the following:

import os

cmd = """sqlite3 database.db <<< ".import input.csv mytable" """

rc = os.system(cmd)

print(rc)

The point is that by specifying the filename of the database, the data will automatically be saved, assuming there are no errors reading it.

Just use the serialize PHP function:

<?php
$myArray = array('1', '2');
$seralizedArray = serialize($myArray);
?>

However, if you are using simple arrays like that you might as well use implode and explode.Use a blank array instead of new.

Try this:

Dim Lastrow As Integer
Lastrow = ActiveSheet.Cells(Rows.Count, 1).End(xlUp).Row

Range("A2:L" & Lastrow).Select

Let's pretend that the value of Lastrow is 50. When you use the following:

Range("A2:L2" & Lastrow).Select

Then it is selecting a range from A2 to L250.

It is possible to use your usual System.Configuration even in .NET Core 2.0 on Linux. Try this test example:

1. Created a .NET Standard 2.0 Library (say MyLib.dll)
2. Added the NuGet package System.Configuration.ConfigurationManager v4.4.0. This is needed since this package isn't covered by the meta-package NetStandard.Library v2.0.0 (I hope that changes)
3. All your C# classes derived from ConfigurationSection or ConfigurationElement go into MyLib.dll. For example MyClass.cs derives from ConfigurationSection and MyAccount.cs derives from ConfigurationElement. Implementation details are out of scope here but Google is your friend.
4. Create a .NET Core 2.0 app (e.g. a console app, MyApp.dll). .NET Core apps end with .dll rather than .exe in Framework.
5. Create an app.config in MyApp with your custom configuration sections. This should obviously match your class designs in #3 above. For example:

<?xml version="1.0" encoding="utf-8"?>
<configuration>
  <configSections>
    <section name="myCustomConfig" type="MyNamespace.MyClass, MyLib" />
  </configSections>
  <myCustomConfig>
    <myAccount id="007" />
  </myCustomConfig>
</configuration>

That's it - you'll find that the app.config is parsed properly within MyApp and your existing code within MyLib works just fine. Don't forget to run dotnet restore if you switch platforms from Windows (dev) to Linux (test).

Additional workaround for test projects

If you're finding that your App.config is not working in your test projects, you might need this snippet in your test project's .csproj (e.g. just before the ending </Project>). It basically copies App.config into your output folder as testhost.dll.config so dotnet test picks it up.

  <!-- START: This is a buildtime work around for https://github.com/dotnet/corefx/issues/22101 -->
  <Target Name="CopyCustomContent" AfterTargets="AfterBuild">
    <Copy SourceFiles="App.config" DestinationFiles="$(OutDir)\testhost.dll.config" />
  </Target>
  <!-- END: This is a buildtime work around for https://github.com/dotnet/corefx/issues/22101 -->

>ssh user@serverip -p portnumber 
>sudo bash (if user does not have bash shell else skip this line)
>cd /home/user/.ssh
>echo ssh_rsa...this is the key >> authorized_keys

This worked on Ubuntu 17.04

sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv 2930ADAE8CAF5059EE73BB4B58712A2291FA4AD5

echo "deb [ arch=amd64,arm64 ] https://repo.mongodb.org/apt/ubuntu xenial/mongodb-org/3.6 multiverse" | sudo tee /etc/apt/sources.list.d/mongodb-org-3.6.list

sudo apt-get update

sudo apt-get install -y mongodb-org

If you see a failure like:

dpkg: error processing archive /var/cache/apt/archives/mongodb-org-tools_3.6.2_amd64.deb (--unpack):
trying to overwrite '/usr/bin/bsondump', which is also in package mongo-tools 3.2.11-1
dpkg-deb: error: subprocess paste was killed by signal (Broken pipe)

Then run this command:

echo "deb [ arch=amd64,arm64 ] http://repo.mongodb.org/apt/ubuntu xenial/mongodb-org/3.6 multiverse" |

sudo tee /etc/apt/sources.list.d/mongodb-org-3.6.list

and

sudo apt update
sudo apt install mongodb-org

References:

• https://docs.mongodb.com/manual/tutorial/install-mongodb-on-ubuntu/

The following structure in docker-compose.yaml will allow you to have the Dockerfile in a subfolder from the root:

version: '3'
services:
  db:
    image: postgres:11
    environment:
      - PGDATA=/var/lib/postgresql/data/pgdata
    volumes:
      - postgres-data:/var/lib/postgresql/data
    ports:
      - 127.0.0.1:5432:5432
  **web:
    build: 
      context: ".."
      dockerfile: dockerfiles/Dockerfile**
    command: ...
...

Then, in your Dockerfile, which is in the same directory as docker-compose.yaml, you can do the following:

ENV APP_HOME /home

RUN mkdir -p ${APP_HOME}

# Copy the file to the directory in the container
COPY test.json ${APP_HOME}/test.json
COPY test.py ${APP_HOME}/test.py

# Browse to that directory created above
WORKDIR ${APP_HOME}

You can then run docker-compose from the parent directory like:

docker-compose -f .\dockerfiles\docker-compose.yaml build --no-cache

Simplifying from pctroll's answer, similarly based on this blog post.

# look up the commit id in git log or on github, e.g. 42480f3, then do
git checkout master
git checkout your_branch
git revert 42480f3
# a text editor will open, close it with ctrl+x (editor dependent)
git push origin your_branch
# or replace origin with your remote

Another reason may be that in very old data access libraries on Windows such as RDO and ADO (COM version not ADO.NET) you had to call a special method, GetChunk, to get data from a column with more than 255 chars. If you limited a varchar column to 255, this extra code wasn't necessary.

BEGIN TRANSACTION

select top 1 *
from table1
with (tablock, holdlock)

-- You do lots of things here

COMMIT

This will hold the 'table lock' until the end of your current "transaction".

java.version is a system property that exists in every JVM. There are two possible formats for it:

• Java 8 or lower: 1.6.0_23, 1.7.0, 1.7.0_80, 1.8.0_211
• Java 9 or higher: 9.0.1, 11.0.4, 12, 12.0.1

Here is a trick to extract the major version: If it is a 1.x.y_z version string, extract the character at index 2 of the string. If it is a x.y.z version string, cut the string to its first dot character, if one exists.

private static int getVersion() {
    String version = System.getProperty("java.version");
    if(version.startsWith("1.")) {
        version = version.substring(2, 3);
    } else {
        int dot = version.indexOf(".");
        if(dot != -1) { version = version.substring(0, dot); }
    } return Integer.parseInt(version);
}

Now you can check the version much more comfortably:

if(getVersion() < 6) {
    // ...
}

You can use pd.Index.difference with np.hstack, then reindex or use label-based indexing. In general, it's a good idea to avoid list comprehensions or other explicit loops with NumPy / Pandas objects.

cols_to_move = ['b', 'x']
new_cols = np.hstack((df.columns.difference(cols_to_move), cols_to_move))

# OPTION 1: reindex
df = df.reindex(columns=new_cols)

# OPTION 2: direct label-based indexing
df = df[new_cols]

# OPTION 3: loc label-based indexing
df = df.loc[:, new_cols]

print(df)

#    a  y  b   x
# 0  1 -1  2   3
# 1  2 -2  4   6
# 2  3 -3  6   9
# 3  4 -4  8  12

Create a UITextView inside of a tableViewController. I used function: textViewDidChange and then checked for return-key-input. then if it detected return-key-input, delete the input of return key and dismiss keyboard.

func textViewDidChange(_ textView: UITextView) {
    tableView.beginUpdates()
    if textView.text.contains("\n"){
        textView.text.remove(at: textView.text.index(before: textView.text.endIndex))
        textView.resignFirstResponder()
    }
    tableView.endUpdates()
}

It fails because str.c_str() returns constant string but char * strtok (char * str, const char * delimiters ) requires volatile string. So you need to use *const_cast< char > inorder to make it voletile. I am giving you a complete but small program to tokenize the string using C strtok() function.

   #include <iostream>
   #include <string>
   #include <string.h> 
   using namespace std;
   int main() {
       string s="20#6 5, 3";
       // strtok requires volatile string as it modifies the supplied string in order to tokenize it 
       char *str=const_cast< char *>(s.c_str());    
       char *tok;
       tok=strtok(str, "#, " );     
       int arr[4], i=0;    
       while(tok!=NULL){
           arr[i++]=stoi(tok);
           tok=strtok(NULL, "#, " );
       }     
       for(int i=0; i<4; i++) cout<<arr[i]<<endl;


       return 0;
   }

NOTE: strtok may not be suitable in all situation as the string passed to function gets modified by being broken into smaller strings. Pls., ref to get better understanding of strtok functionality.

How strtok works

Added few print statement to better understand the changes happning to string in each call to strtok and how it returns token.

#include <iostream>
#include <string>
#include <string.h> 
using namespace std;
int main() {
    string s="20#6 5, 3";
    char *str=const_cast< char *>(s.c_str());    
    char *tok;
    cout<<"string: "<<s<<endl;
    tok=strtok(str, "#, " );     
    cout<<"String: "<<s<<"\tToken: "<<tok<<endl;   
    while(tok!=NULL){
        tok=strtok(NULL, "#, " );
        cout<<"String: "<<s<<"\t\tToken: "<<tok<<endl;
    }
    return 0;
}

Output:

string: 20#6 5, 3

String: 206 5, 3    Token: 20
String: 2065, 3     Token: 6
String: 2065 3      Token: 5
String: 2065 3      Token: 3
String: 2065 3      Token: 

strtok iterate over the string first call find the non delemetor character (2 in this case) and marked it as token start then continues scan for a delimeter and replace it with null charater (# gets replaced in actual string) and return start which points to token start character( i.e., it return token 20 which is terminated by null). In subsequent call it start scaning from the next character and returns token if found else null. subsecuntly it returns token 6, 5, 3.

"Sometimes" this can mean that the server had an internal error, and wanted to respond with an error message (ex: 500 with JSON payload) but since the request headers didn't say it accepted JSON, it returns a 406 instead. Go figure. (in this case: spring boot webapp).

In which case, your operation did fail. But the failure message was obscured by another.

Using an example data.frame and example function (just +1 to all values)

A <- function(x) x + 1
wifi <- data.frame(replicate(9,1:4))
wifi

#  X1 X2 X3 X4 X5 X6 X7 X8 X9
#1  1  1  1  1  1  1  1  1  1
#2  2  2  2  2  2  2  2  2  2
#3  3  3  3  3  3  3  3  3  3
#4  4  4  4  4  4  4  4  4  4

data.frame(wifi[1:3], apply(wifi[4:9],2, A) )
#or
cbind(wifi[1:3], apply(wifi[4:9],2, A) )

#  X1 X2 X3 X4 X5 X6 X7 X8 X9
#1  1  1  1  2  2  2  2  2  2
#2  2  2  2  3  3  3  3  3  3
#3  3  3  3  4  4  4  4  4  4
#4  4  4  4  5  5  5  5  5  5

Or even:

data.frame(wifi[1:3], lapply(wifi[4:9], A) )
#or
cbind(wifi[1:3], lapply(wifi[4:9], A) )

#  X1 X2 X3 X4 X5 X6 X7 X8 X9
#1  1  1  1  2  2  2  2  2  2
#2  2  2  2  3  3  3  3  3  3
#3  3  3  3  4  4  4  4  4  4
#4  4  4  4  5  5  5  5  5  5

Correct on all fronts. Outside of a character class (that's what the "square brackets" are called) the hyphen has no special meaning, and within a character class, you can place a hyphen as the first or last character in the range (e.g. [-a-z] or [0-9-]), OR escape it (e.g. [a-z\-0-9]) in order to add "hyphen" to your class.

It's more common to find a hyphen placed first or last within a character class, but by no means will you be lynched by hordes of furious neckbeards for choosing to escape it instead.

(Actually... my experience has been that a lot of regex is employed by folks who don't fully grok the syntax. In these cases, you'll typically see everything escaped (e.g. [a-z\%\$\#\@\!\-\_]) simply because the engineer doesn't know what's "special" and what's not... so they "play it safe" and obfuscate the expression with loads of excessive backslashes. You'll be doing yourself, your contemporaries, and your posterity a huge favor by taking the time to really understand regex syntax before using it.)

Great question!

The answers above are good, but I'd like to flesh them out with a few more tips:

If you want to modify the title of the back button (the arrow-y looking one at the left of the navigation bar) you MUST do it in the PREVIOUS view controller, not the one for which it will display. It's like saying "hey, if you ever push another view controller on top of this one, call the back button "Back" (or whatever) instead of the default."

If you want to hide the back button during a special state, such as while a UIPickerView is displayed, use self.navigationItem.hidesBackButton = YES; and remember to set it back when you leave the special state.

If you want to display one of the special symbolic buttons, use the form initWithBarButtonSystemItem:target:action with a value like UIBarButtonSystemItemAdd

Remember, the meaning of that symbol is up to you, but be careful of the Human Interface Guidelines. Using UIBarButtonSystemItemAdd to mean deleting an item will probably get your application rejected.

C++03 (Source: Iterator Invalidation Rules (C++03))

Insertion

Sequence containers

• vector: all iterators and references before the point of insertion are unaffected, unless the new container size is greater than the previous capacity (in which case all iterators and references are invalidated) [23.2.4.3/1]
• deque: all iterators and references are invalidated, unless the inserted member is at an end (front or back) of the deque (in which case all iterators are invalidated, but references to elements are unaffected) [23.2.1.3/1]
• list: all iterators and references unaffected [23.2.2.3/1]

Associative containers

• [multi]{set,map}: all iterators and references unaffected [23.1.2/8]

Container adaptors

• stack: inherited from underlying container
• queue: inherited from underlying container
• priority_queue: inherited from underlying container

Erasure

Sequence containers

• vector: every iterator and reference after the point of erase is invalidated [23.2.4.3/3]
• deque: all iterators and references are invalidated, unless the erased members are at an end (front or back) of the deque (in which case only iterators and references to the erased members are invalidated) [23.2.1.3/4]
• list: only the iterators and references to the erased element is invalidated [23.2.2.3/3]

Associative containers

• [multi]{set,map}: only iterators and references to the erased elements are invalidated [23.1.2/8]

Container adaptors

• stack: inherited from underlying container
• queue: inherited from underlying container
• priority_queue: inherited from underlying container

Resizing

• vector: as per insert/erase [23.2.4.2/6]
• deque: as per insert/erase [23.2.1.2/1]
• list: as per insert/erase [23.2.2.2/1]

Note 1

Unless otherwise specified (either explicitly or by defining a function in terms of other functions), invoking a container member function or passing a container as an argument to a library function shall not invalidate iterators to, or change the values of, objects within that container. [23.1/11]

Note 2

It's not clear in C++2003 whether "end" iterators are subject to the above rules; you should assume, anyway, that they are (as this is the case in practice).

Note 3

The rules for invalidation of pointers are the sames as the rules for invalidation of references.

This is what list comprehensions are for:

numbers = [ int(x) for x in numbers ]

You're using Comparators incorrectly.

 Collections.sort(movieItems, new Comparator<Movie>(){
           public int compare (Movie m1, Movie m2){
               return m1.getDate().compareTo(m2.getDate());
           }
       });

Here's a Python version:

from math import radians, cos, sin, asin, sqrt

def haversine(lon1, lat1, lon2, lat2):
    """
    Calculate the great circle distance between two points 
    on the earth (specified in decimal degrees)
    """
    # convert decimal degrees to radians 
    lon1, lat1, lon2, lat2 = map(radians, [lon1, lat1, lon2, lat2])

    # haversine formula 
    dlon = lon2 - lon1 
    dlat = lat2 - lat1 
    a = sin(dlat/2)**2 + cos(lat1) * cos(lat2) * sin(dlon/2)**2
    c = 2 * asin(sqrt(a)) 
    r = 6371 # Radius of earth in kilometers. Use 3956 for miles
    return c * r

I have the following in the compose file

volumes:
  - "/etc/timezone:/etc/timezone:ro"
  - "/etc/localtime:/etc/localtime:ro"

Then all good in Gerrit docker with its replication_log set with correct timestamp.

You can use org.apache.commons.lang.time.DateUtils to make it cleaner:

(firstDate.getTime() - secondDate.getTime()) / DateUtils.MILLIS_PER_SECOND

1. Use conditional formatting instead of VBA to highlight errors.

2. Using a VBA loop like the one you posted will take a long time to process

3. the statement If cell.Value = "#N/A" Then will never work. If you insist on using VBA to highlight errors, try this instead.

   Sub ColorCells()

   Dim Data As Range
   Dim cell As Range
   Set currentsheet = ActiveWorkbook.Sheets("Comparison")
   Set Data = currentsheet.Range("A2:AW1048576")
   
   For Each cell In Data
   
   If IsError(cell.Value) Then
      cell.Interior.ColorIndex = 3
   End If
   Next
   
   End Sub
   

4. Be prepared for a long wait, since the procedure loops through 51 million cells

5. There are more efficient ways to achieve what you want to do. Update your question if you have a change of mind.

Modify the background image of the <td> itself.

Or apply some css to the div:

.thatSetsABackgroundWithAnIcon{
    height:100%;
}

I took the answer from PirateApp and made it reusable. If you include this script it will transform all selects with the class '.dropdown' to searchable dropdowns.

$('.dropdown').each(function(index, dropdown) {

  //Find the input search box
  let search = $(dropdown).find('.search');

  //Find every item inside the dropdown
  let items = $(dropdown).find('.dropdown-item');

  //Capture the event when user types into the search box
  $(search).on('input', function() {
    filter($(search).val().trim().toLowerCase())
  });

  //For every word entered by the user, check if the symbol starts with that word
  //If it does show the symbol, else hide it
  function filter(word) {
    let length = items.length
    let collection = []
    let hidden = 0
    for (let i = 0; i < length; i++) {
      if (items[i].value.toString().toLowerCase().includes(word)) {
        $(items[i]).show()
      } else {
        $(items[i]).hide()
        hidden++
      }
    }

    //If all items are hidden, show the empty view
    if (hidden === length) {
      $(dropdown).find('.dropdown_empty').show();
    } else {
      $(dropdown).find('.dropdown_empty').hide();
    }
  }

  //If the user clicks on any item, set the title of the button as the text of the item
  $(dropdown).find('.dropdown-menu').find('.menuItems').on('click', '.dropdown-item', function() {
    $(dropdown).find('.dropdown-toggle').text($(this)[0].value);
    $(dropdown).find('.dropdown-toggle').dropdown('toggle');
  })
});

<link href="https://stackpath.bootstrapcdn.com/bootstrap/4.4.1/css/bootstrap.min.css" rel="stylesheet" />

<script src="https://code.jquery.com/jquery-3.4.1.slim.min.js"></script>
<script src="https://cdn.jsdelivr.net/npm/[email protected]/dist/umd/popper.min.js"></script>
<script src="https://stackpath.bootstrapcdn.com/bootstrap/4.4.1/js/bootstrap.min.js"></script>

<div class="dropdown">
  <button class="btn btn-sm btn-secondary dropdown-toggle" type="button" data-toggle="dropdown" aria-haspopup="true" aria-expanded="false">
        Benutzer
    </button>
  <div class="dropdown-menu" aria-labelledby="dropdown_user">
    <form class="px-4 py-2">
      <input type="search" class="form-control search" placeholder="Suche.." autofocus="autofocus">
    </form>
    <div class="menuItems">
      <input type="button" class="dropdown-item" type="button" value="Test1" />
      <input type="button" class="dropdown-item" type="button" value="Test2" />
      <input type="button" class="dropdown-item" type="button" value="Test3" />
    </div>
    <div style="display:none;" class="dropdown-header dropdown_empty">No entry found</div>
  </div>
</div>

I know it's been a while on this question, but I was just looking for the same answer and found this seems to be the simplest solution:

select * from sales where datediff(dd, salesDate, '20101111') = 0

I actually use it more to find things within the last day or two, so my version looks like this:

select * from sales where datediff(dd, salesDate, getdate()) = 0

And by changing the 0 for today to a 1 I get yesterday's transactions, 2 is the day before that, and so on. And if you want everything for the last week, just change the equals to a less-than-or-equal-to:

select * from sales where datediff(dd, salesDate, getdate()) <= 7

This should work:

String.fromCharCode(...array);

Or

String.fromCodePoint(...array)

Those are all ways to start the standard minecraft launcher with those credentials in the text boxes.

There used to be a way to login to minecraft without the launcher using the command line, but it has since been patched.

If you want to make a custom launcher using the command line then good luck, the only way to login to the minecraft jar(IE: the way the launcher does it) is to send a post request to https://login.minecraft.net/ with the username,password,launcher version, and a RSA key. It then parses the pseudo Json, and uses the session token from that to authenticate the jar from the command line with a load of arguments.

If you are trying to make a minecraft launcher and you have no knowledge of java,http requests or json then you have no chance.

Swift

This will print out a hexadecimal representation of a pthread_t, no matter what that actually is:

void fprintPt(FILE *f, pthread_t pt) {
  unsigned char *ptc = (unsigned char*)(void*)(&pt);
  fprintf(f, "0x");
  for (size_t i=0; i<sizeof(pt); i++) {
    fprintf(f, "%02x", (unsigned)(ptc[i]));
  }
}

To just print a small id for a each pthread_t something like this could be used (this time using iostreams):

void printPt(std::ostream &strm, pthread_t pt) {
  static int nextindex = 0;
  static std::map<pthread_t, int> ids;
  if (ids.find(pt) == ids.end()) {
    ids[pt] = nextindex++;
  }
  strm << ids[pt];
}

Depending on the platform and the actual representation of pthread_t it might here be necessary to define an operator< for pthread_t, because std::map needs an ordering on the elements:

bool operator<(const pthread_t &left, const pthread_t &right) {
  ...
}

Late to the party, but for future Googlers - don't use the provided answer.

JavaScript has a mechanism of passing objects by reference, while it only passes a shallow copy for values "numbers, strings etc".

In above example, instead of binding attributes of a service, why don't we expose the service to the scope?

$scope.hello = HelloService;

This simple approach will make angular able to do two-way binding and all the magical things you need. Don't hack your controller with watchers or unneeded markup.

And if you are worried about your view accidentally overwriting your service attributes, use defineProperty to make it readable, enumerable, configurable, or define getters and setters. You can gain lots of control by making your service more solid.

Final tip: if you spend your time working on your controller more than your services then you are doing it wrong :(.

In that particular demo code you supplied I would recommend you do:

 function TimerCtrl1($scope, Timer) {
   $scope.timer = Timer;
 }
///Inside view
{{ timer.time_updated }}
{{ timer.other_property }}
etc...

Edit:

As I mentioned above, you can control the behaviour of your service attributes using defineProperty

Example:

// Lets expose a property named "propertyWithSetter" on our service
// and hook a setter function that automatically saves new value to db !
Object.defineProperty(self, 'propertyWithSetter', {
  get: function() { return self.data.variable; },
  set: function(newValue) { 
         self.data.variable = newValue; 
         // let's update the database too to reflect changes in data-model !
         self.updateDatabaseWithNewData(data);
       },
  enumerable: true,
  configurable: true
});

Now in our controller if we do

$scope.hello = HelloService;
$scope.hello.propertyWithSetter = 'NEW VALUE';

our service will change the value of propertyWithSetter and also post the new value to database somehow!

Or we can take any approach we want.

Refer to the MDN documentation for defineProperty.

If you want to run a few scripts, you can use Set-executionpolicy -ExecutionPolicy Unrestricted and then reset with Set-executionpolicy -ExecutionPolicy Default.

Note that execution policy is only checked when you start its execution (or so it seems) and so you can run jobs in the background and reset the execution policy immediately.

# Check current setting
Get-ExecutionPolicy

# Disable policy
Set-ExecutionPolicy -ExecutionPolicy Unrestricted
# Choose [Y]es

Start-Job { cd c:\working\directory\with\script\ ; ./ping_batch.ps1 example.com | tee ping__example.com.txt }
Start-Job { cd c:\working\directory\with\script\ ; ./ping_batch.ps1 google.com  | tee ping__google.com.txt  }

# Can be run immediately
Set-ExecutionPolicy -ExecutionPolicy Default
# [Y]es

A general solution that handles multiple levels and mixed types:

df.columns = ['_'.join(tuple(map(str, t))) for t in df.columns.values]

What exactly are you looking for when you mean multiline strings.

Are you looking for something like:

var str = "Some \
    String \
    Here";

Which would print as "Some String Here"?

If so, keep in mind that the above is valid Javascript, but this isn't:

var str = "Some \ 
    String \
    Here";

What's the difference? A space after the \. Have fun debugging that.

I made a SCSS mixin for it.

@mixin last-row-flexbox($num-columns, $width-items){

  $filled-space: $width-items * $num-columns;
  $margin: calc((100% - #{$filled-space}) / (#{$num-columns} - 1));

  $num-cols-1 : $num-columns - 1;

  &:nth-child(#{$num-columns}n+1):nth-last-child(-n+#{$num-cols-1}) ~ & {
    margin-left: $margin;
  }
  @for $i from 1 through $num-columns - 2 { 
    $index: $num-columns - $i;
    &:nth-child(#{$num-columns}n+#{$index}):last-child{
      margin-right: auto;
    }
  }
}

This is the codepen link: http://codepen.io/diana_aceves/pen/KVGNZg

You just have to set the items width in percentage and number of columns.

I hope this can help you.

as Frank said Firebase stores sequence of values in the format of "key": "Value" which is a Map structure

to get List from this sequence you have to

1. initialize GenericTypeIndicator with HashMap of String and your Object.
2. get value of DataSnapShot as GenericTypeIndicator into Map.
3. initialize ArrayList with HashMap values.

GenericTypeIndicator<HashMap<String, Object>> objectsGTypeInd = new GenericTypeIndicator<HashMap<String, Object>>() {};
Map<String, Object> objectHashMap = dataSnapShot.getValue(objectsGTypeInd);
ArrayList<Object> objectArrayList = new ArrayList<Object>(objectHashMap.values());

Works fine for me, Hope it helps.

You can try with textContent.

var productId = val[key].textContent;

Since it is only a warning you can suppress it. Go to your XML's Graphical Layout and do this:

1. Click on the right top corner red button
   
   

2. Select "Disable Issue Type" (for example)
   
   

Try using String.replace() or String.replaceAll() instead.

String my_new_str = my_str.replace("&", "&");

(Both replace all occurrences; replaceAll allows use of regex.)

Normally you want to show this message, when the user has made changes in a form, but they are not saved.

Take this approach to show a message, only when the user has changed something

var form = $('#your-form'),
  original = form.serialize()

form.submit(function(){
  window.onbeforeunload = null
})

window.onbeforeunload = function(){
  if (form.serialize() != original)
    return 'Are you sure you want to leave?'
}

There is a whole Section in the docs called 16.3.3.4 Mapping the request body with the @RequestBody annotation. And one called 16.3.3.5 Mapping the response body with the @ResponseBody annotation. I suggest you consult those sections. Also relevant: @RequestBody javadocs, @ResponseBody javadocs

Usage examples would be something like this:

Using a JavaScript-library like JQuery, you would post a JSON-Object like this:

{ "firstName" : "Elmer", "lastName" : "Fudd" }

Your controller method would look like this:

// controller
@ResponseBody @RequestMapping("/description")
public Description getDescription(@RequestBody UserStats stats){
    return new Description(stats.getFirstName() + " " + stats.getLastname() + " hates wacky wabbits");
}

// domain / value objects
public class UserStats{
    private String firstName;
    private String lastName;
    // + getters, setters
}
public class Description{
    private String description;
    // + getters, setters, constructor
}

Now if you have Jackson on your classpath (and have an <mvc:annotation-driven> setup), Spring would convert the incoming JSON to a UserStats object from the post body (because you added the @RequestBody annotation) and it would serialize the returned object to JSON (because you added the @ResponseBody annotation). So the Browser / Client would see this JSON result:

{ "description" : "Elmer Fudd hates wacky wabbits" }

See this previous answer of mine for a complete working example: https://stackoverflow.com/a/5908632/342852

Note: RequestBody / ResponseBody is of course not limited to JSON, both can handle multiple formats, including plain text and XML, but JSON is probably the most used format.

Update

Ever since Spring 4.x, you usually won't use @ResponseBody on method level, but rather @RestController on class level, with the same effect.

Here is a quote from the official Spring MVC documentation:

@RestController is a composed annotation that is itself meta-annotated with @Controller and @ResponseBody to indicate a controller whose every method inherits the type-level @ResponseBody annotation and, therefore, writes directly to the response body versus view resolution and rendering with an HTML template.

If you want to convert an int which is in the range 0-9 to a char, you may usually write something like this:

int x;
char c = '0' + x;

Now, if you want a character string, just add a terminating '\0' char:

char s[] = {'0' + x, '\0'};

Note that:

1. You must be sure that the int is in the 0-9 range, otherwise it will fail,
2. It works only if character codes for digits are consecutive. This is true in the vast majority of systems, that are ASCII-based, but this is not guaranteed to be true in all cases.

Here's the quick and dirty way.

// Add $injector as a parameter for your controller

function myAngularController($scope,$injector){

    $scope.sendorders = function(){

       // now you can use $injector to get the 
       // handle of $rootScope and broadcast to all

       $injector.get('$rootScope').$broadcast('sinkallships');

    };

}

Here is an example function to add within any of the sibling controllers:

$scope.$on('sinkallships', function() {

    alert('Sink that ship!');                       

});

and of course here's your HTML:

<button ngclick="sendorders()">Sink Enemy Ships</button>

Had same problem - what happened to me is our server admin changed the session.cookie_secure boolean to On, which means that cookies will only be sent over a secure connection. Since the cookie was not being found, php was creating a new session every time, thus session variables were not being seen.

The "problem" with the tabs is that they indent the text to fixed tab positions, typically multiples of 4 or 8 characters (depending on the console or editor displaying them). Your first filename is 7 chars, so the next tab stop after its end is at position 8. Your subsequent filenames however are 8 chars long, so the next tab stop is at position 12.

If you want to ensure that columns get nicely indented at the same position, you need to take into account the actual length of previous columns, and either modify the number of following tabs, or pad with the required number of spaces instead. The latter can be achieved using e.g. System.out.printf with an appropriate format specification (e.g. "%1$13s" specifies a minimum width of 13 characters for displaying the first argument as a string).

There is no built-in formula in excel, you have to add a vb script and permanently save it with your MS. Excel's installation as Add-In.

1. press Alt+F11
2. MENU: (Tool Strip) Insert Module
3. copy and paste the below code

Option Explicit

Public Numbers As Variant, Tens As Variant

Sub SetNums()
    Numbers = Array("", "One", "Two", "Three", "Four", "Five", "Six", "Seven", "Eight", "Nine", "Ten", "Eleven", "Twelve", "Thirteen", "Fourteen", "Fifteen", "Sixteen", "Seventeen", "Eighteen", "Nineteen")
    Tens = Array("", "", "Twenty", "Thirty", "Forty", "Fifty", "Sixty", "Seventy", "Eighty", "Ninety")
End Sub

Function WordNum(MyNumber As Double) As String
    Dim DecimalPosition As Integer, ValNo As Variant, StrNo As String
    Dim NumStr As String, n As Integer, Temp1 As String, Temp2 As String
    ' This macro was written by Chris Mead - www.MeadInKent.co.uk
    If Abs(MyNumber) > 999999999 Then
        WordNum = "Value too large"
        Exit Function
    End If
    SetNums
    ' String representation of amount (excl decimals)
    NumStr = Right("000000000" & Trim(Str(Int(Abs(MyNumber)))), 9)
    ValNo = Array(0, Val(Mid(NumStr, 1, 3)), Val(Mid(NumStr, 4, 3)), Val(Mid(NumStr, 7, 3)))
    For n = 3 To 1 Step -1    'analyse the absolute number as 3 sets of 3 digits
        StrNo = Format(ValNo(n), "000")
        If ValNo(n) > 0 Then
            Temp1 = GetTens(Val(Right(StrNo, 2)))
            If Left(StrNo, 1) <> "0" Then
                Temp2 = Numbers(Val(Left(StrNo, 1))) & " hundred"
                If Temp1 <> "" Then Temp2 = Temp2 & " and "
            Else
                Temp2 = ""
            End If
            If n = 3 Then
                If Temp2 = "" And ValNo(1) + ValNo(2) > 0 Then Temp2 = "and "
                WordNum = Trim(Temp2 & Temp1)
            End If
            If n = 2 Then WordNum = Trim(Temp2 & Temp1 & " thousand " & WordNum)
            If n = 1 Then WordNum = Trim(Temp2 & Temp1 & " million " & WordNum)
        End If
    Next n
    NumStr = Trim(Str(Abs(MyNumber)))
    ' Values after the decimal place
    DecimalPosition = InStr(NumStr, ".")
    Numbers(0) = "Zero"
    If DecimalPosition > 0 And DecimalPosition < Len(NumStr) Then
        Temp1 = " point"
        For n = DecimalPosition + 1 To Len(NumStr)
            Temp1 = Temp1 & " " & Numbers(Val(Mid(NumStr, n, 1)))
        Next n
        WordNum = WordNum & Temp1
    End If
    If Len(WordNum) = 0 Or Left(WordNum, 2) = " p" Then
        WordNum = "Zero" & WordNum
    End If
End Function

Function GetTens(TensNum As Integer) As String
' Converts a number from 0 to 99 into text.
    If TensNum <= 19 Then
        GetTens = Numbers(TensNum)
    Else
        Dim MyNo As String
        MyNo = Format(TensNum, "00")
        GetTens = Tens(Val(Left(MyNo, 1))) & " " & Numbers(Val(Right(MyNo, 1)))
    End If
End Function

After this, From File Menu select Save Book ,from next menu select "Excel 97-2003 Add-In (*.xla)

It will save as Excel Add-In. that will be available till the Ms.Office Installation to that machine.

Now Open any Excel File in any Cell type =WordNum(<your numeric value or cell reference>)

you will see a Words equivalent of the numeric value.

This Snippet of code is taken from: http://en.kioskea.net/forum/affich-267274-how-to-convert-number-into-text-in-excel

My answer deals with a more specific case of what you are asking but I think one could draw some ideas from this to apply more generally. Also, I would post this as a comment to Purushoth's answer (on which mine is based), if only I could.

Ok, so my problem was how to fit a web page into the pdf document, without losing the aspect ratio. I used jsPDF in conjuction with html2canvas and I calculated the ratio from my div's width and height. I applied that same ratio to the pdf document and the page fit perfectly onto the page without any distortion.

var divHeight = $('#div_id').height();
var divWidth = $('#div_id').width();
var ratio = divHeight / divWidth;
html2canvas(document.getElementById("div_id"), {
     height: divHeight,
     width: divWidth,
     onrendered: function(canvas) {
          var image = canvas.toDataURL("image/jpeg");
          var doc = new jsPDF(); // using defaults: orientation=portrait, unit=mm, size=A4
          var width = doc.internal.pageSize.getWidth();    
          var height = doc.internal.pageSize.getHeight();
          height = ratio * width;
          doc.addImage(image, 'JPEG', 0, 0, width-20, height-10);
          doc.save('myPage.pdf'); //Download the rendered PDF.
     }
});

It will take more than an year (or two) for the universal acceptance.

1. Unicode consortium approves the char-code.
2. Fonts are updated to include this symbol
3. Browsers/OS are updated to include new fonts and then only it is visible on every browser on earth.

Creating custom fonts by using arbitrary code-base and (forcefully) embedding them in every web-pages is discouraged for Website. (for desktop applications it may be acceptable). Although your solution may be acceptable; I would not advice just for the sake of one symbol! Loading a font file makes web-pages slower.

By the time it is advised to use icon-sets for rupee symbol. Prepare a set of icons with sizes 12x8, 16x12, 32x32 that you can incorporate in-line using <img> tag.

E.g 5000/- (i just resized the image; it should have been re-sampled for given size for better results)

<img src="http://i.stack.imgur.com/nGbfO.png" width="8" height="10">

Note: This is what Wikipedia does. it uses png/svg file. Check the infobox here.

This is a method for converting a Java object to a Map

public static Map<String, Object> ConvertObjectToMap(Object obj) throws 
    IllegalAccessException, 
    IllegalArgumentException, 
    InvocationTargetException {
        Class<?> pomclass = obj.getClass();
        pomclass = obj.getClass();
        Method[] methods = obj.getClass().getMethods();


        Map<String, Object> map = new HashMap<String, Object>();
        for (Method m : methods) {
           if (m.getName().startsWith("get") && !m.getName().startsWith("getClass")) {
              Object value = (Object) m.invoke(obj);
              map.put(m.getName().substring(3), (Object) value);
           }
        }
    return map;
}

This is how to call it

   Test test = new Test()
   Map<String, Object> map = ConvertObjectToMap(test);

If the output of MAX(CreationDate) is not wanted - like in the example of the original question - the only answer is the second statement of Prashant Gupta's answer:

SELECT [Category] FROM [MonitoringJob] 
GROUP BY [Category] ORDER BY MAX([CreationDate]) DESC

Explanation: you can't use the ORDER BY clause in an inline function, so the statement in the answer of Prutswonder is not useable in this case, you can't put an outer select around it and discard the MAX(CreationDate) part.

I found the easy way

--- right click the webconfig or app config file and click EDIT WCF CONFIGURATION and got to bingdigs ans select yore service and right side show maxReciveMessageSize give a large number ---

Very simple option in case you have many individual columns to delete in a data table and you want to avoid typing in all column names #careadviced

dt <- dt[, -c(1,4,6,17,83,104)]

This will remove columns based on column number instead.

It's obviously not as efficient because it bypasses data.table advantages but if you're working with less than say 500,000 rows it works fine

Instead of create the new Container class you can use a dataTable.

DataTable dt = new DataTable();
dt.Columns.Add("My first column Name");

dt.Rows.Add(new object[] { "Item 1" });
dt.Rows.Add(new object[] { "Item number 2" });
dt.Rows.Add(new object[] { "Item number three" });

myDataGridView.DataSource = dt;

More about this problem you can find here: http://psworld.pl/Programming/BindingListOfString

I claim that the obvious way to see whether casting a value changed the value would be to cast and check the result. I would, however, remove the unnecessary cast when comparing. I'm also not too keen on one letter variable names (exception x and y, but not when they mean row and column (sometimes respectively)).

public static int intValue(long value) {
    int valueInt = (int)value;
    if (valueInt != value) {
        throw new IllegalArgumentException(
            "The long value "+value+" is not within range of the int type"
        );
    }
    return valueInt;
}

However, really I would want to avoid this conversion if at all possible. Obviously sometimes it's not possible, but in those cases IllegalArgumentException is almost certainly the wrong exception to be throwing as far as client code is concerned.

A function to cope with the cross-browser stuff:

addCssRule = function(/* string */ selector, /* string */ rule) {
  if (document.styleSheets) {
    if (!document.styleSheets.length) {
      var head = document.getElementsByTagName('head')[0];
      head.appendChild(bc.createEl('style'));
    }

    var i = document.styleSheets.length-1;
    var ss = document.styleSheets[i];

    var l=0;
    if (ss.cssRules) {
      l = ss.cssRules.length;
    } else if (ss.rules) {
      // IE
      l = ss.rules.length;
    }

    if (ss.insertRule) {
      ss.insertRule(selector + ' {' + rule + '}', l);
    } else if (ss.addRule) {
      // IE
      ss.addRule(selector, rule, l);
    }
  }
};

Here's another solution using display: flex instead of position: absolute or display: grid.

.container_row{_x000D_
  display: flex;_x000D_
}_x000D_
_x000D_
.layer1 {_x000D_
  width: 100%;_x000D_
  background-color: rgba(255,0,0,0.5);  // red_x000D_
}_x000D_
_x000D_
.layer2{_x000D_
  width: 100%;_x000D_
  margin-left: -100%;_x000D_
  background-color: rgba(0,0,255,0.5);  // blue_x000D_
}

<div class="container_row">_x000D_
    <div class="layer1">_x000D_
        <span>Lorem ipsum...</span>_x000D_
    </div>_x000D_
    <div class="layer2">_x000D_
        More lorem ipsum..._x000D_
    </div>_x000D_
</div>_x000D_
<div class="container_row">_x000D_
    ...same HTML as above. This one should never overlap the .container_row above._x000D_
</div>

SELECT *
  FROM Customer
 WHERE (I.IsClose=@ISClose OR @ISClose is NULL)  
   AND (C.FirstName like '%'+@ClientName+'%' or @ClientName is NULL )    
   AND (isnull(@Value,1) <> 2
        OR I.RecurringCharge = @Total
        OR @Total is NULL )    
   AND (isnull(@Value,2) <> 3
        OR I.RecurringCharge like '%'+cast(@Total as varchar(50))+'%'
        OR @Total is NULL )

Basically, your condition was

if (@Value=2)
   TEST FOR => (I.RecurringCharge=@Total  or @Total is NULL )    

flipped around,

AND (isnull(@Value,1) <> 2                -- A
        OR I.RecurringCharge = @Total    -- B
        OR @Total is NULL )              -- C

When (A) is true, i.e. @Value is not 2, [A or B or C] will become TRUE regardless of B and C results. B and C are in reality only checked when @Value = 2, which is the original intention.

Path Variables dialog has nothing to do with the environment variables.

Environment variables can be specified in your OS or customized in the Run configuration:

Using Dapper. so i added this i hope anyone help.

public void Insert(ProductName obj)
        {
            SqlConnection connection = new SqlConnection(Connection.GetConnectionString());
            connection.Open();
            connection.Execute("ProductName_sp", new
            { @Name = obj.Name, @Code = obj.Code, @CategoryId = obj.CategoryId, @CompanyId = obj.CompanyId, @ReorderLebel = obj.ReorderLebel, @logo = obj.logo,@Status=obj.Status, @ProductPrice = obj.ProductPrice,
                @SellingPrice = obj.SellingPrice, @VatPercent = obj.VatPercent, @Description=obj.Description, @ColourId = obj.ColourId, @SizeId = obj.SizeId,
                @BrandId = obj.BrandId, @DisCountPercent = obj.DisCountPercent, @CreateById =obj.CreateById, @StatementType = "Create" }, commandType: CommandType.StoredProcedure);
            connection.Close();
        }

I had similiar problem and this is how I solved it:

1. In index.html file I've added manifest:

   <html manifest="cache.manifest">
   

2. In <head> section included script updating the cache:

   <script type="text/javascript" src="update_cache.js"></script>
   

3. In <body> section I've inserted onload function:

   <body onload="checkForUpdate()">
   

4. In cache.manifest I've put all files I want to cache. It is important now that it works in my case (Apache) just by updating each time the "version" comment. It is also an option to name files with "?ver=001" or something at the end of name but it's not needed. Changing just # version 1.01 triggers cache update event.

   CACHE MANIFEST
   # version 1.01
   style.css
   imgs/logo.png
   #all other files
   

   It's important to include 1., 2. and 3. points only in index.html. Otherwise

   GET http://foo.bar/resource.ext net::ERR_FAILED
   

   occurs because every "child" file tries to cache the page while the page is already cached.

5. In update_cache.js file I've put this code:

   function checkForUpdate()
   {
       if (window.applicationCache != undefined && window.applicationCache != null)
       {
           window.applicationCache.addEventListener('updateready', updateApplication);
       }
   }
   function updateApplication(event)
   {
       if (window.applicationCache.status != 4) return;
       window.applicationCache.removeEventListener('updateready', updateApplication);
       window.applicationCache.swapCache();
       window.location.reload();
   }
   

Now you just change files and in manifest you have to update version comment. Now visiting index.html page will update the cache.

The parts of solution aren't mine but I've found them through internet and put together so that it works.

Just discovered that if the source table for a subform is updated using adodb, it takes a while until the requery can find the updated information.

In my case, I was adding some records with 'dbconn.execute "sql" ' and wondered why the requery command in vba doesn't seem to work. When I was debugging, the requery worked. Added a 2-3 second wait in the code before requery just to test made a difference.

But changing to 'currentdb.execute "sql" ' fixed the problem immediately.

.a files are static libraries typically generated by the archive tool. You usually include the header files associated with that static library and then link to the library when you are compiling.

use a css3 class "spinner". It's more beautiful and you don't need .gif

.spinner {
   position: absolute;
   left: 50%;
   top: 50%;
   height:60px;
   width:60px;
   margin:0px auto;
   -webkit-animation: rotation .6s infinite linear;
   -moz-animation: rotation .6s infinite linear;
   -o-animation: rotation .6s infinite linear;
   animation: rotation .6s infinite linear;
   border-left:6px solid rgba(0,174,239,.15);
   border-right:6px solid rgba(0,174,239,.15);
   border-bottom:6px solid rgba(0,174,239,.15);
   border-top:6px solid rgba(0,174,239,.8);
   border-radius:100%;
}

@-webkit-keyframes rotation {
   from {-webkit-transform: rotate(0deg);}
   to {-webkit-transform: rotate(359deg);}
}
@-moz-keyframes rotation {
   from {-moz-transform: rotate(0deg);}
   to {-moz-transform: rotate(359deg);}
}
@-o-keyframes rotation {
   from {-o-transform: rotate(0deg);}
   to {-o-transform: rotate(359deg);}
}
@keyframes rotation {
   from {transform: rotate(0deg);}
   to {transform: rotate(359deg);}
}

Exemple of what is looks like : http://jsbin.com/roqakuxebo/1/edit

You can find a lot of css spinners like this here : http://cssload.net/en/spinners/

Other answers here address the general question of what the proper Content-Type for an XML response is, and conclude (as with What's the difference between text/xml vs application/xml for webservice response) that both text/xml and application/xml are permissible. However, none address whether there are any rules specific to sitemaps.

Answer: there aren't. The sitemap spec is https://www.sitemaps.org, and using Google site: searches you can confirm that it does not contain the words or phrases mime, mimetype, content-type, application/xml, or text/xml anywhere. In other words, it is entirely silent on the topic of what Content-Type should be used for serving sitemaps.

In the absence of any commentary in the sitemap spec directly addressing this question, we can safely assume that the same rules apply as when choosing the Content-Type of any other XML document - i.e. that it may be either text/xml or application/xml.

Foreground needs a Brush, so you can use

textBlock.Foreground = Brushes.Navy;

If you want to use the color from RGB or ARGB then

textBlock.Foreground = new System.Windows.Media.SolidColorBrush(System.Windows.Media.Color.FromArgb(100, 255, 125, 35)); 

or

textBlock.Foreground = new System.Windows.Media.SolidColorBrush(Colors.Navy); 

To get the Color from Hex

textBlock.Foreground = new System.Windows.Media.SolidColorBrush((Color)ColorConverter.ConvertFromString("#FFDFD991")); 

Note that the if $myVar; then ... ;fi construct has a security problem you might want to avoid with

case $myvar in
  (true)    echo "is true";;
  (false)   echo "is false";;
  (rm -rf*) echo "I just dodged a bullet";;
esac

You might also want to rethink why if [ "$myvar" = "true" ] appears awkward to you. It's a shell string comparison that beats possibly forking a process just to obtain an exit status. A fork is a heavy and expensive operation, while a string comparison is dead cheap. Think a few CPU cycles versus several thousand. My case solution is also handled without forks.

its on you ul in the file http://ratest4.com/wp-content/themes/HarnettArts-BP-2010/style.css on line 252

add this to your css

ul{
     list-style:none;
}

Udhay's sample code works well. Except the question of Sofiane Hassaini and Chirag SolankI, for the re-entrance, it doesn't work. I try to call Udhay's code without restart the activity in onCreate() , before super.onCreate(savedInstanceState);. Then it is OK! Only a little problem, the menu strings still not changed to the set Locale.

    public void setLocale(String lang) { //call this in onCreate()
      Locale myLocale = new Locale(lang); 
      Resources res = getResources(); 
      DisplayMetrics dm = res.getDisplayMetrics(); 
      Configuration conf = res.getConfiguration(); 
      conf.locale = myLocale; 
      res.updateConfiguration(conf, dm); 
      //Intent refresh = new Intent(this, AndroidLocalize.class); 
      //startActivity(refresh); 
      //finish();
    } 

See ?read.table. Basically, when you use read.table, you specify a number indicating the column:

##Row names in the first column
read.table(filname.txt, row.names=1)

The problem for me was a space BEFORE one of the column headers. Once i fixed that, no more problems

Use PHP's native json_encode, like this:

<?php
$arr = array(
    array(
        "region" => "valore",
        "price" => "valore2"
    ),
    array(
        "region" => "valore",
        "price" => "valore2"
    ),
    array(
        "region" => "valore",
        "price" => "valore2"
    )
);

echo json_encode($arr);
?>

Update: To answer your question in the comment. You do it like this:

$named_array = array(
    "nome_array" => array(
        array(
            "foo" => "bar"
        ),
        array(
            "foo" => "baz"
        )
    )
);
echo json_encode($named_array);

download the opencv 2.2 version from https://sourceforge.net/projects/opencvlibrary/files/opencv-win/

install package.

then Copy cv2.pyd to C:/Python27/lib/site-packeges.

and it should work:

import cv2

For this use below code in your app gradle file under android closure.

dexOptions { javaMaxHeapSize "4g" }

Deleting Bin and Obj folders worked for me.

I suspect the or one or more characters had no match in the target code page part of the error.

If you remove the rows with values in that column, does it load? Can you identify, in other words, the rows which cause the package to fail? It could be the data is too long, or it could be that there's some funky character in there SQL Server doesn't like.

One caveat on using window.open() is that if the url that you pass to it doesn't have http:// or https:// in front of it, angular treats it as a route.

To get around this, test if the url starts with http:// or https:// and append it if it doesn't.

let url: string = '';
if (!/^http[s]?:\/\//.test(this.urlToOpen)) {
    url += 'http://';
}

url += this.urlToOpen;
window.open(url, '_blank');

The below css works for both Chrome and Firefox

input[type=number]::-webkit-outer-spin-button,
input[type=number]::-webkit-inner-spin-button {
    -webkit-appearance: none;
    margin: 0;
}

input[type=number] {
    -moz-appearance:textfield;
}

Since both None and "" are false, you can do both. See 6.1. Truth Value Testing.

Edit

To answer the question in your edit: No, you can assign a different type.

>>> a = ""
>>> type(a)
<type 'str'>
>>> a = 1
>>> type(a)
<type 'int'>

I use the below Object.entries to easily output the key and the value:

{Object.entries(someObject).map(([key, val], i) => (
    <p key={i}>
        {key}: {val}
    </p>
))}

For completeness, echo $(__git_ps1), on Linux at least, should give you the name of the current branch surrounded by parentheses.

This may be useful is some scenarios as it is not a Git command (while depending on Git), notably for setting up your Bash command prompt to display the current branch.

For example:

/mnt/c/git/ConsoleApp1 (test-branch)> echo $(__git_ps1)
(test-branch)
/mnt/c/git/ConsoleApp1 (test-branch)> git checkout master
Switched to branch 'master'
/mnt/c/git/ConsoleApp1 (master)> echo $(__git_ps1)
(master)
/mnt/c/git/ConsoleApp1 (master)> cd ..
/mnt/c/git> echo $(__git_ps1)

/mnt/c/git>

In addition to all the options listed by other answers, you can use git reset with the Git object (hash, branch, HEAD~x, tag, ...) of interest and the path of your file:

git reset <hash> /path/to/file

In your example:

git reset 27cf8e8 my_file.txt

What this does is that it will revert my_file.txt to its version at the commit 27cf8e8 in the index while leaving it untouched (so in its current version) in the working directory.

From there, things are very easy:

• you can compare the two versions of your file with git diff --cached my_file.txt
• you can get rid of the old version of the file with git restore --staged file.txt (or, prior to Git v2.23, git reset file.txt) if you decide that you don't like it
• you can restore the old version with git commit -m "Restore version of file.txt from 27cf8e8" and git restore file.txt (or, prior to Git v2.23, git checkout -- file.txt)
• you can add updates from the old to the new version only for some hunks by running git add -p file.txt (then git commit and git restore file.txt).

Lastly, you can even interactively pick and choose which hunk(s) to reset in the very first step if you run:

git reset -p 27cf8e8 my_file.txt

So git reset with a path gives you lots of flexibility to retrieve a specific version of a file to compare with its currently checked-out version and, if you choose to do so, to revert fully or only for some hunks to that version.

Edit: I just realized that I am not answering your question since what you wanted wasn't a diff or an easy way to retrieve part or all of the old version but simply to cat that version.

Of course, you can still do that after resetting the file with:

git show :file.txt

to output to standard output or

git show :file.txt > file_at_27cf8e8.txt

But if this was all you wanted, running git show directly with git show 27cf8e8:file.txt as others suggested is of course much more direct.

I am going to leave this answer though because running git show directly allows you to get that old version instantly, but if you want to do something with it, it isn't nearly as convenient to do so from there as it is if you reset that version in the index.

I needed to make sure that my scripts are entirely portable between various machines, shells and even cygwin versions. Further, my colleagues who were the ones I had to write the scripts for, are programmers, so I ended up using this:

for ((i=1;i<=$#;i++)); 
do

    if [ ${!i} = "-s" ] 
    then ((i++)) 
        var1=${!i};

    elif [ ${!i} = "-log" ];
    then ((i++)) 
        logFile=${!i};  

    elif [ ${!i} = "-x" ];
    then ((i++)) 
        var2=${!i};    

    elif [ ${!i} = "-p" ]; 
    then ((i++)) 
        var3=${!i};

    elif [ ${!i} = "-b" ];
    then ((i++)) 
        var4=${!i};

    elif [ ${!i} = "-l" ];
    then ((i++)) 
        var5=${!i}; 

    elif [ ${!i} = "-a" ];
    then ((i++)) 
        var6=${!i};
    fi

done;

Rationale: I included a launcher.sh script as well, since the whole operation had several steps which were quasi independent on each other (I'm saying "quasi", because even though each script could be run on its own, they were usually all run together), and in two days I found out, that about half of my colleagues, being programmers and all, were too good to be using the launcher file, follow the "usage", or read the HELP which was displayed every time they did something wrong and they were making a mess of the whole thing, running scripts with arguments in the wrong order and complaining that the scripts didn't work properly. Being the choleric I am I decided to overhaul all my scripts to make sure that they are colleague-proof. The code segment above was the first thing.

Briefly:

1. Get the self signed certificate
2. Put it into some (e.g. ~/git-certs/cert.pem) file
3. Set git to trust this certificate using http.sslCAInfo parameter

In more details:

Get self signed certificate of remote server

Assuming, the server URL is repos.sample.com and you want to access it over port 443.

There are multiple options, how to get it.

Get certificate using openssl

$ openssl s_client -connect repos.sample.com:443

Catch the output into a file cert.pem and delete all but part between (and including) -BEGIN CERTIFICATE- and -END CERTIFICATE-

Content of resulting file ~/git-certs/cert.pem may look like this:

-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----

Get certificate using your web browser

I use Redmine with Git repositories and I access the same URL for web UI and for git command line access. This way, I had to add exception for that domain into my web browser.

Using Firefox, I went to Options -> Advanced -> Certificates -> View Certificates -> Servers, found there the selfsigned host, selected it and using Export button I got exactly the same file, as created using openssl.

Note: I was a bit surprised, there is no name of the authority visibly mentioned. This is fine.

Having the trusted certificate in dedicated file

Previous steps shall result in having the certificate in some file. It does not matter, what file it is as long as it is visible to your git when accessing that domain. I used ~/git-certs/cert.pem

Note: If you need more trusted selfsigned certificates, put them into the same file:

-----BEGIN CERTIFICATE-----
MIIDnzCCAocCBE/xnXAwDQYJKoZIhvcNAQEFBQAwgZMxCzAJBgNVBAYTAkRFMRUw
...........
/27/jIdVQIKvHok2P/u9tvTUQA==
-----END CERTIFICATE-----
-----BEGIN CERTIFICATE-----
AnOtHeRtRuStEdCeRtIfIcAtEgOeShErExxxxxxxxxxxxxxxxxxxxxxxxxxxxxxw
...........
/27/jIdVQIKvHok2P/u9tvTUQA==
-----END CERTIFICATE-----

This shall work (but I tested it only with single certificate).

Configure git to trust this certificate

$ git config --global http.sslCAInfo /home/javl/git-certs/cert.pem

You may also try to do that system wide, using --system instead of --global.

And test it: You shall now be able communicating with your server without resorting to:

$ git config --global http.sslVerify false #NO NEED TO USE THIS

If you already set your git to ignorance of ssl certificates, unset it:

$ git config --global --unset http.sslVerify

and you may also check, that you did it all correctly, without spelling errors:

$ git config --global --list

what should list all variables, you have set globally. (I mispelled http to htt).

Just to have a simple and complete example for Python 3, which most people seem to be using now.

class MySuper(object):
    def __init__(self,a):
        self.a = a

class MySub(MySuper):
    def __init__(self,a,b):
        self.b = b
        super().__init__(a)

my_sub = MySub(42,'chickenman')
print(my_sub.a)
print(my_sub.b)

gives

42
chickenman

I has similar problem in context of Stripe:

Error: Stripe no longer supports API requests made with TLS 1.0. Please initiate HTTPS connections with TLS 1.2 or later. You can learn more about this at https://stripe.com/blog/upgrading-tls.

Forcing TLS 1.2 using CURL parameter is temporary solution or even it can't be applied because of lack of room to place an update. By default TLS test function https://gist.github.com/olivierbellone/9f93efe9bd68de33e9b3a3afbd3835cf showed following configuration:

SSL version: NSS/3.21 Basic ECC
SSL version number: 0
OPENSSL_VERSION_NUMBER: 1000105f
TLS test (default): TLS 1.0
TLS test (TLS_v1): TLS 1.2
TLS test (TLS_v1_2): TLS 1.2

I updated libraries using following command:

yum update nss curl openssl

and then saw this:

SSL version: NSS/3.21 Basic ECC
SSL version number: 0
OPENSSL_VERSION_NUMBER: 1000105f
TLS test (default): TLS 1.2
TLS test (TLS_v1): TLS 1.2
TLS test (TLS_v1_2): TLS 1.2

Please notice that default TLS version changed to 1.2! That globally solved problem. This will help PayPal users too: https://www.paypal.com/au/webapps/mpp/tls-http-upgrade (update before end of June 2017)

I think you can use the overload of Regex.Replace to specify the maximum number of times to replace...

var regex = new Regex(Regex.Escape("o"));
var newText = regex.Replace("Hello World", "Foo", 1);

java.util.Calendar

// today    
Calendar date = new GregorianCalendar();
// reset hour, minutes, seconds and millis
date.set(Calendar.HOUR_OF_DAY, 0);
date.set(Calendar.MINUTE, 0);
date.set(Calendar.SECOND, 0);
date.set(Calendar.MILLISECOND, 0);

// next day
date.add(Calendar.DAY_OF_MONTH, 1);

JDK 8 - java.time.LocalTime and java.time.LocalDate

LocalTime midnight = LocalTime.MIDNIGHT;
LocalDate today = LocalDate.now(ZoneId.of("Europe/Berlin"));
LocalDateTime todayMidnight = LocalDateTime.of(today, midnight);
LocalDateTime tomorrowMidnight = todayMidnight.plusDays(1);

Joda-Time

If you're using a JDK < 8, I recommend Joda Time, because the API is really nice:

DateTime date = new DateTime().toDateMidnight().toDateTime();
DateTime tomorrow = date.plusDays(1);

Since version 2.3 of Joda Time DateMidnight is deprecated, so use this:

DateTime today = new DateTime().withTimeAtStartOfDay();
DateTime tomorrow = today.plusDays(1).withTimeAtStartOfDay();

Pass a time zone if you don't want the JVM’s current default time zone.

DateTimeZone timeZone = DateTimeZone.forID("America/Montreal");
DateTime today = new DateTime(timeZone).withTimeAtStartOfDay(); // Pass time zone to constructor.

You can revert only one file to a specified revision.

First you can check on which commits the file was changed.

git log path/to/file.txt

Then you can checkout the file with the revision number.

git checkout 3cdc61015724f9965575ba954c8cd4232c8b42e4 /path/to/file.txt

After that you can commit and push it again.

Simple way to initiate the message on startup:

bot.on('ready', () => {
    bot.user.setStatus('available')
    bot.user.setPresence({
        game: {
            name: 'with depression',
            type: "STREAMING",
            url: "https://www.twitch.tv/monstercat"
        }
    });
});

You can also just declare it elsewhere after startup, to change the message as needed:

bot.user.setPresence({ game: { name: 'with depression', type: "streaming", url: "https://www.twitch.tv/monstercat"}}); 

Often times we are interested in calculating the full significant digits, but for the visual aesthetics, we may want to see only few decimal point when we display the dataframe.

In jupyter-notebook, pandas can utilize the html formatting taking advantage of the method called style.

For the case of just seeing two significant digits of some columns, we can use this code snippet:

Given dataframe

import numpy as np
import pandas as pd

df = pd.DataFrame({'var1': [1.458315, 1.576704, 1.629253, 1.6693310000000001, 1.705139, 1.740447, 1.77598, 1.812037, 1.85313, 1.9439849999999999],
          'var2': [1.500092, 1.6084450000000001, 1.652577, 1.685456, 1.7120959999999998, 1.741961, 1.7708009999999998, 1.7993270000000001, 1.8229819999999999, 1.8684009999999998],
          'var3': [-0.0057090000000000005, -0.005122, -0.0047539999999999995, -0.003525, -0.003134, -0.0012230000000000001, -0.0017230000000000001, -0.002013, -0.001396, 0.005732]})

print(df)
       var1      var2      var3
0  1.458315  1.500092 -0.005709
1  1.576704  1.608445 -0.005122
2  1.629253  1.652577 -0.004754
3  1.669331  1.685456 -0.003525
4  1.705139  1.712096 -0.003134
5  1.740447  1.741961 -0.001223
6  1.775980  1.770801 -0.001723
7  1.812037  1.799327 -0.002013
8  1.853130  1.822982 -0.001396
9  1.943985  1.868401  0.005732

Style to get required format

    df.style.format({'var1': "{:.2f}",'var2': "{:.2f}",'var3': "{:.2%}"})

Gives:

var1    var2    var3
id          
0   1.46    1.50    -0.57%
1   1.58    1.61    -0.51%
2   1.63    1.65    -0.48%
3   1.67    1.69    -0.35%
4   1.71    1.71    -0.31%
5   1.74    1.74    -0.12%
6   1.78    1.77    -0.17%
7   1.81    1.80    -0.20%
8   1.85    1.82    -0.14%
9   1.94    1.87    0.57%

Update

If display command is not found try following:

from IPython.display import display

df_style = df.style.format({'var1': "{:.2f}",'var2': "{:.2f}",'var3': "{:.2%}"})

display(df_style)

Requirements

• To use display command, you need to have installed Ipython in your machine.
• The display command does not work in online python interpreter which do not have IPyton installed such as https://repl.it/languages/python3
• The display command works in jupyter-notebook, jupyter-lab, Google-colab, kaggle-kernels, IBM-watson,Mode-Analytics and many other platforms out of the box, you do not even have to import display from IPython.display

Wrap all the children inside of another LinearLayout with wrap_content for both the width and the height as well as the vertical orientation.

Select first the text you want to format and then press Ctrl+I.

Use Cmd+A first if you wish to format all text in the selected file.

Note: this procedure only re-indents the lines, it does not do any advanced formatting.

In XCode 12 beta:

The new key binding to re-indent is control+I.

This jQuery code catches immediate changes to any element, and should work across all browsers:

 $('.myElements').each(function() {
   var elem = $(this);

   // Save current value of element
   elem.data('oldVal', elem.val());

   // Look for changes in the value
   elem.bind("propertychange change click keyup input paste", function(event){
      // If value has changed...
      if (elem.data('oldVal') != elem.val()) {
       // Updated stored value
       elem.data('oldVal', elem.val());

       // Do action
       ....
     }
   });
 });

EDIT : Works with design library upto 23.0.1 but doesn't work on 23.1.0

In main layout xml you will have NavigationView defined, in that use app:headerLayout to set the header view.

<android.support.design.widget.NavigationView
        android:id="@+id/navigation_view"
        android:layout_width="wrap_content"
        android:layout_height="match_parent"
        android:layout_gravity="start"
        app:headerLayout="@layout/nav_drawer_header"
        app:menu="@menu/navigation_drawer_menu" />

And the @layout/nav_drawer_header will be the place holder of the image and texts.

nav_drawer_header.xml

<?xml version="1.0" encoding="utf-8"?>
<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
android:layout_width="match_parent"
android:layout_height="170dp"
android:orientation="vertical">

<RelativeLayout
    android:id="@+id/headerRelativeLayout"
    android:layout_width="match_parent"
    android:layout_height="match_parent">

    <ImageView
        android:layout_width="match_parent"
        android:layout_height="wrap_content"
        android:scaleType="fitXY"
        android:src="@drawable/background" />

    <LinearLayout
        android:layout_width="match_parent"
        android:layout_height="@dimen/action_bar_size"
        android:layout_alignParentBottom="true"
        android:layout_alignParentLeft="true"
        android:layout_alignParentStart="true"
        android:background="#40000000"
        android:gravity="center"
        android:orientation="horizontal"
        android:paddingBottom="5dp"
        android:paddingLeft="16dp"
        android:paddingRight="10dp"
        android:paddingTop="5dp">

        <LinearLayout
            android:layout_width="match_parent"
            android:layout_height="match_parent"
            android:layout_marginLeft="35dp"
            android:orientation="vertical"
            android:weightSum="2">


            <TextView
                android:id="@+id/navHeaderTitle"
                android:layout_width="wrap_content"
                android:layout_height="0dp"
                android:layout_weight="1"
                android:textAppearance="?android:attr/textAppearanceMedium"
                android:textColor="@android:color/white" />

            <TextView
                android:id="@+id/navHeaderSubTitle"
                android:layout_width="wrap_content"
                android:layout_height="0dp"
                android:layout_weight="1"
                android:textAppearance="?android:attr/textAppearanceSmall"
                android:textColor="@android:color/white" />

        </LinearLayout>

    </LinearLayout>
</RelativeLayout>
</LinearLayout>

And in your main class, you can take handle of Imageview and TextView as like normal other views.

TextView navHeaderTitle = (TextView) findViewById(R.id.navHeaderTitle);
navHeaderTitle.setText("Application Name");

TextView navHeaderSubTitle = (TextView) findViewById(R.id.navHeaderSubTitle);
navHeaderSubTitle.setText("Application Caption");

Hope this helps.

stdin.read(1)

will not return when you press one character - it will wait for '\n'. The problem is that the second character is buffered in standard input, and the moment you call another input - it will return immediately because it gets its input from buffer.

This is copied from above, but condensed slightly and re-written in semantic terms. Note: #Container has display: flex; and flex-direction: column;, while the columns have flex: 3; and flex: 2; (where "One value, unitless number" determines the flex-grow property) per MDN flex docs.

#Container {_x000D_
  display: flex;_x000D_
  flex-direction: column;_x000D_
  height: 600px;_x000D_
  width: 580px;_x000D_
}_x000D_
_x000D_
.Content {_x000D_
  display: flex;_x000D_
  flex: 1;_x000D_
}_x000D_
_x000D_
#Detail {_x000D_
  flex: 3;_x000D_
  background-color: lime;_x000D_
}_x000D_
_x000D_
#ThumbnailContainer {_x000D_
  flex: 2;_x000D_
  background-color: black;_x000D_
}

<div id="Container">_x000D_
  <div class="Content">_x000D_
    <div id="Detail"></div>_x000D_
    <div id="ThumbnailContainer"></div>_x000D_
  </div>_x000D_
</div>

<input type="text" value="3" class="field left" readonly>

No styling necessary.

See <input> on MDN https://developer.mozilla.org/en/docs/Web/HTML/Element/input#Attributes

If you have declare a bitmap object and you want to display it or store this bitmap object. but first you have to assign any image , and you may use the button click event, this code will only demonstrate that how to store the drawable image in bitmap Object.

Bitmap contact_pic = BitmapFactory.decodeResource(
                           v.getContext().getResources(),
                           R.drawable.android_logo
                     );

Now you can use this bitmap object, whether you want to store it, or to use it in google maps while drawing a pic on fixed latitude and longitude, or to use some where else

To specify any additional asset folder I've used this with my Gradle. This adds moreAssets, a folder in the project root, to the assets.

android {
    sourceSets {
        main.assets.srcDirs += '../moreAssets'
    }
}

You can always use the definition of xor to compute it from other logical operations:

(a and not b) or (not a and b)

But this is a little too verbose for me, and isn't particularly clear at first glance. Another way to do it is:

bool(a) ^ bool(b)

The xor operator on two booleans is logical xor (unlike on ints, where it's bitwise). Which makes sense, since bool is just a subclass of int, but is implemented to only have the values 0 and 1. And logical xor is equivalent to bitwise xor when the domain is restricted to 0 and 1.

So the logical_xor function would be implemented like:

def logical_xor(str1, str2):
    return bool(str1) ^ bool(str2)

Credit to Nick Coghlan on the Python-3000 mailing list.

Try adding the following to your eclipse.ini file:

-vm
C:\Program Files\Java\jdk1.7.0_01\bin\java.exe

You might also have to change the Dosgi.requiredJavaVersion to 1.7 in the same file.

String rawData = "id=10";
String type = "application/x-www-form-urlencoded";
String encodedData = URLEncoder.encode( rawData, "UTF-8" ); 
URL u = new URL("http://www.example.com/page.php");
HttpURLConnection conn = (HttpURLConnection) u.openConnection();
conn.setDoOutput(true);
conn.setRequestMethod("POST");
conn.setRequestProperty( "Content-Type", type );
conn.setRequestProperty( "Content-Length", String.valueOf(encodedData.length()));
OutputStream os = conn.getOutputStream();
os.write(encodedData.getBytes());

Use the attribute onkeyup="myFunction()" in the <input> of your html.

Just trigger stuff, set some flag, return false. If flag is set - do nothing.

In Intellij 2019, I did: File > Settings > Editor > General option Show quick documentation on mouse move.

Selecting just one branch: fetch/merge vs. pull

People often advise you to separate "fetching" from "merging". They say instead of this:

    git pull remoteR branchB

do this:

    git fetch remoteR
    git merge remoteR branchB

What they don't mention is that such a fetch command will actually fetch all branches from the remote repo, which is not what that pull command does. If you have thousands of branches in the remote repo, but you do not want to see all of them, you can run this obscure command:

    git fetch remoteR refs/heads/branchB:refs/remotes/remoteR/branchB
    git branch -a  # to verify
    git branch -t branchB remoteR/branchB

Of course, that's ridiculously hard to remember, so if you really want to avoid fetching all branches, it is better to alter your .git/config as described in ProGit.

Huh?

The best explanation of all this is in Chapter 9-5 of ProGit, Git Internals - The Refspec (or via github). That is amazingly hard to find via Google.

First, we need to clear up some terminology. For remote-branch-tracking, there are typically 3 different branches to be aware of:

1. The branch on the remote repo: refs/heads/branchB inside the other repo
2. Your remote-tracking branch: refs/remotes/remoteR/branchB in your repo
3. Your own branch: refs/heads/branchB inside your repo

Remote-tracking branches (in refs/remotes) are read-only. You do not modify those directly. You modify your own branch, and then you push to the corresponding branch at the remote repo. The result is not reflected in your refs/remotes until after an appropriate pull or fetch. That distinction was difficult for me to understand from the git man-pages, mainly because the local branch (refs/heads/branchB) is said to "track" the remote-tracking branch when .git/config defines branch.branchB.remote = remoteR.

Think of 'refs' as C++ pointers. Physically, they are files containing SHA-digests, but basically they are just pointers into the commit tree. git fetch will add many nodes to your commit-tree, but how git decides what pointers to move is a bit complicated.

As mentioned in another answer, neither

    git pull remoteR branchB

nor

    git fetch remoteR branchB

would move refs/remotes/branches/branchB, and the latter certainly cannot move refs/heads/branchB. However, both move FETCH_HEAD. (You can cat any of these files inside .git/ to see when they change.) And git merge will refer to FETCH_HEAD, while setting MERGE_ORIG, etc.

You expose ports using the EXPOSE keyword in the Dockerfile or the --expose flag to docker run. Exposing ports is a way of documenting which ports are used, but does not actually map or open any ports. Exposing ports is optional.

Source: github commit

You can check /etc/ld.so.preload file content

I fix it by:

echo "" > /etc/ld.so.preload

I suggest you do it a different way.

In the following code I set as a Range the column with the sports name F and loop through each cell of it, check if it is "hockey" and if yes I insert the values in the other sheet one by one, by using Offset.

I do not think it is very complicated and even if you are just learning VBA, you should probably be able to understand every step. Please let me know if you need some clarification

Sub TestThat()

'Declare the variables
Dim DataSh As Worksheet
Dim HokySh As Worksheet
Dim SportsRange As Range
Dim rCell As Range
Dim i As Long

'Set the variables
Set DataSh = ThisWorkbook.Sheets("Data")
Set HokySh = ThisWorkbook.Sheets("Hoky")

Set SportsRange = DataSh.Range(DataSh.Cells(3, 6), DataSh.Cells(Rows.Count, 6).End(xlUp))
    'I went from the cell row3/column6 (or F3) and go down until the last non empty cell

    i = 2

    For Each rCell In SportsRange 'loop through each cell in the range

        If rCell = "hockey" Then 'check if the cell is equal to "hockey"

            i = i + 1                                'Row number (+1 everytime I found another "hockey")
            HokySh.Cells(i, 2) = i - 2               'S No.
            HokySh.Cells(i, 3) = rCell.Offset(0, -1) 'School
            HokySh.Cells(i, 4) = rCell.Offset(0, -2) 'Background
            HokySh.Cells(i, 5) = rCell.Offset(0, -3) 'Age

        End If

    Next rCell

End Sub

I kind of bumped into this project at SourceForge. It seems to me it's still active.

1. PDF convert to JPEG at SourceForge
2. Developer's site

My two cents.

Try:

<input id="hybrid" type="text" name="password" />

<script type="text/javascript">
    document.getElementById('hybrid').type = 'password';
</script>

Maybe just put all your constants in a frozen object?

class MyClass {

    constructor() {
        this.constants = Object.freeze({
            constant1: 33,
            constant2: 2,
        });
    }

    static get constant1() {
        return this.constants.constant1;
    }

    doThisAndThat() {
        //...
        let value = this.constants.constant2;
        //...
    }
}

The most elegant way to fix this: use pipe. Here is example (my blog). So you can then simply use url | safe pipe to bypass the security.

<iframe [src]="url | safe"></iframe>

Refer to the documentation on npm for details: https://www.npmjs.com/package/safe-pipe

find is the common tool for this kind of task :

find ./my_dir -mtime +10 -type f -delete

EXPLANATIONS

• ./my_dir your directory (replace with your own)
• -mtime +10 older than 10 days
• -type f only files
• -delete no surprise. Remove it to test your find filter before executing the whole command

And take care that ./my_dir exists to avoid bad surprises !

jsonb in Postgres 9.4+

You can use the same query as below, just with jsonb_array_elements().

But rather use the jsonb "contains" operator @> in combination with a matching GIN index on the expression data->'objects':

CREATE INDEX reports_data_gin_idx ON reports
USING gin ((data->'objects') jsonb_path_ops);

SELECT * FROM reports WHERE data->'objects' @> '[{"src":"foo.png"}]';

Since the key objects holds a JSON array, we need to match the structure in the search term and wrap the array element into square brackets, too. Drop the array brackets when searching a plain record.

More explanation and options:

• Index for finding an element in a JSON array

json in Postgres 9.3+

Unnest the JSON array with the function json_array_elements() in a lateral join in the FROM clause and test for its elements:

SELECT data::text, obj
FROM   reports r, json_array_elements(r.data#>'{objects}') obj
WHERE  obj->>'src' = 'foo.png';

db<>fiddle here
_{Old sqlfiddle}

The CTE (WITH query) just substitutes for a table reports.
Or, equivalent for just a single level of nesting:

SELECT *
FROM   reports r, json_array_elements(r.data->'objects') obj
WHERE  obj->>'src' = 'foo.png';

->>, -> and #> operators are explained in the manual.

Both queries use an implicit JOIN LATERAL.

Closely related:

• Query for element of array in JSON column

The @Controller annotation indicates that the class is a "Controller" like a web controller while @RestController annotation indicates that the class is a controller where @RequestMapping methods assume @ResponseBody semantics by default i.e. servicing REST API

There can also be problem deleting a stuck database if snapshot is enabled. For me this worked:

1. First I followed Tipu Delacablu steps (read a few posts up)
2. run command: drop database [your database], which will give you an error telling you the name of the snapshot database
3. run command: drop database [snapshot database], and then run the command in step 2 again.

Adding to Julia Passynkova's answer

To set validation error in component:

formData.form.controls['email'].setErrors({'incorrect': true});

To unset validation error in component:

formData.form.controls['email'].setErrors(null);

Be careful with unsetting the errors using null as this will overwrite all errors. If you want to keep some around you may have to check for the existence of other errors first:

if (isIncorrectOnlyError){
   formData.form.controls['email'].setErrors(null);
}

I had a similar error but not from a Conversion...

System.Web.HttpException: 'Namespace.Website.MasterUserPages' is not allowed here because it does not extend class 'System.Web.UI.MasterPage'

I was also extending the MasterPage class.

The error was due to a simple compilation error in my Master Page itself:

System.Web.HttpCompileException: c:\directory\path\Website\MasterUserPages.Master(30): error CS1061: 'ASP.masteruserpages_master' does not contain a definition for 'btnHelp_Click' and no extension method 'btnHelp_Click' accepting a first argument of type 'ASP.masteruserpages_master' could be found (are you missing a using directive or an assembly reference?)

I was not able to see the error until I moved the MasterPage to the root website folder. Once that was taken care of I was able to put my MasterPage back in the folder I wanted.

Here is the solution that I recently used:

public class Test {
    public String a;
    public long b;
    public Date c;
    public String d;
    
    @Override
    public boolean equals(Object obj) {
        if (this == obj) {
            return true;
        }
        if (!(obj instanceof Test)) {
            return false;
        }
        Test testOther = (Test) obj;
        return (a != null ? a.equals(testOther.a) : testOther.a == null)
                && (b == testOther.b)
                && (c != null ? c.equals(testOther.c) : testOther.c == null)
                && (d != null ? d.equals(testOther.d) : testOther.d == null);
    }

}

Adding on to the one mentioned by @abarnert

a better one is to catch the exception

import subprocess
try:
    py2output = subprocess.check_output(['python', 'py2.py', '-i', 'test.txt'],stderr= subprocess.STDOUT)  
    #print('py2 said:', py2output)
    print "here"
except subprocess.CalledProcessError as e:
    print "Calledprocerr"

this stderr= subprocess.STDOUT is for making sure you dont get the filenotfound error in stderr- which cant be usually caught in filenotfoundexception, else you would end up getting

python: can't open file 'py2.py': [Errno 2] No such file or directory

Infact a better solution to this might be to check, whether the file/scripts exist and then to run the file/script

If you are looking at graph analysis in C++ probably the first place to start would be the boost graph library, which implements a number of algorithms including BFS.

• Boost Graph Library Docs

EDIT

This previous question on SO will probably help:

how-to-create-a-c-boost-undirected-graph-and-traverse-it-in-depth-first-search

best solution TNX to Drew Chapin and all of you too:

I just want to add that if you don't inheritently know the name of a domain controller, you can get the closest one, pass it's hostname to the -Server argument.

$dc = Get-ADDomainController -DomainName example.com -Discover -NextClosestSite

Get-ADUser -Server $dc.HostName[0] `
    -Filter { EmailAddress -Like "*Smith_Karla*" } `
    -Properties EmailAddress

my script:

$dc = Get-ADDomainController -DomainName example.com -Discover -NextClosestSite
 Get-ADUser -Server $dc.HostName[0] ` -Filter { EmailAddress -Like "*Smith_Karla*" } `  -Properties EmailAddress | Export-CSV "C:\Scripts\Email.csv

First, align-items is for items in a single row. So for a single row of elements on main axis, align-items will align these items respective of each other and it will start with fresh perspective from the next row.

Now, align-content doesn't interfere with items in a row but with rows itself. Hence, align-content will try to align rows with respect to each other and flex container.

Check this fiddle : https://jsfiddle.net/htym5zkn/8/

To stream the file to the browser, see Stack Overflow question How to stream a PDF file as binary to the browser using .NET 2.0 - note that, with minor variations, this should work whether you're serving up a file from the file system or dynamically generated.

With that said, the referenced MSDN article takes a rather simplistic view of the world, so you may want to read Successfully Stream a PDF to browser through HTTPS as well for some of the headers you may need to supply.

Using that approach, an iframe is probably the best way to go. Have one webform that streams the file, and then put the iframe on another page with its src attribute set to the first form.

You can use this solution. (Use nuget package) The source code is available on : Github: https://github.com/michelcedric/UserImpersonation

More detail https://michelcedric.wordpress.com/2015/09/03/usurpation-didentite-dun-user-c-user-impersonation/

It actually requires inclusion of Twitter Bootstrap's dropdown.js

http://getbootstrap.com/2.3.2/components.html

From the package matplotlib.dates as shown in this example the date format can be applied to the axis label and ticks for plot.

Below I have given an example for labeling axis ticks for multiplots

import matplotlib.pyplot as plt
import matplotlib.dates as mdates
import pandas as pd

df = pd.read_csv('US_temp.csv')
plt.plot(df['Date'],df_f['MINT'],label='Min Temp.')
plt.plot(df['Date'],df_f['MAXT'],label='Max Temp.')
plt.legend()
####### Use the below functions #######
dtFmt = mdates.DateFormatter('%b') # define the formatting
plt.gca().xaxis.set_major_formatter(dtFmt) # apply the format to the desired axis
plt.show()

As simple as that

The java.util.Date class isn't actually deprecated, just that constructor, along with a couple other constructors/methods are deprecated. It was deprecated because that sort of usage doesn't work well with internationalization. The Calendar class should be used instead:

Calendar cal = Calendar.getInstance();
cal.set(Calendar.YEAR, 1988);
cal.set(Calendar.MONTH, Calendar.JANUARY);
cal.set(Calendar.DAY_OF_MONTH, 1);
Date dateRepresentation = cal.getTime();

Take a look at the date Javadoc:

http://download.oracle.com/javase/6/docs/api/java/util/Date.html

Try regexp currency with jQuery (no plugin):

$(document).ready(function(){_x000D_
  $('#test').click(function() {_x000D_
    TESTCURRENCY = $('#value').val().toString().match(/(?=[\s\d])(?:\s\.|\d+(?:[.]\d+)*)/gmi);_x000D_
    if (TESTCURRENCY.length <= 1) {_x000D_
      $('#valueshow').val(_x000D_
        parseFloat(TESTCURRENCY.toString().match(/^\d+(?:\.\d{0,2})?/))_x000D_
      );_x000D_
    } else {_x000D_
      $('#valueshow').val('Invalid a value!');_x000D_
    }_x000D_
  });_x000D_
});

<script src="https://ajax.googleapis.com/ajax/libs/jquery/1.9.1/jquery.min.js"></script>_x000D_
<input type="text" value="12345.67890" id="value">_x000D_
<input type="button" id="test" value="CLICK">_x000D_
<input type="text" value="" id="valueshow">

Edit: New check a value to valid/invalid

In the nav go View => Layout => Columns:2 (alt+shift+2) and open your file again in the other pane (i.e. click the other pane and use ctrl+p filename.py)

It appears you can also reopen the file using the command File -> New View into File which will open the current file in a new tab

It's not 100% clear from the code example, but if the list initial_parameters_of_hypothesis_function is a list of tf.Variable objects, then the line session.run(init) will fail because TensorFlow isn't (yet) smart enough to figure out the dependencies in variable initialization. To work around this, you should change the loop that creates parameters to use initial_parameters_of_hypothesis_function[i].initialized_value(), which adds the necessary dependency:

parameters = []
for i in range(0, number_of_attributes, 1):
    parameters.append(tf.Variable(
        initial_parameters_of_hypothesis_function[i].initialized_value()))

I don't know if this applies to python as well, but I think it depends on the operating system that you are running.

On Linux for example, output to terminal flushes the buffer on a newline, whereas for output to files it only flushes when the buffer is full (by default). This is because it is more efficient to flush the buffer fewer times, and the user is less likely to notice if the output is not flushed on a newline in a file.

You might be able to auto-flush the output if that is what you need.

EDIT: I think you would auto-flush in python this way (based from here)

#0 means there is no buffer, so all output
#will be auto-flushed
fsock = open('out.log', 'w', 0)
sys.stdout = fsock
#do whatever
fsock.close()

CURL OPERATION BETWEEN SERVER TO SERVER WITHOUT HTML FORM IN PHP USING MULTIPART/FORM-DATA

// files to upload

$filename = "https://example.s3.amazonaws.com/0.jpg";       

// URL to upload to (Destination server)

$url = "https://otherserver/image";

AND

    $curl = curl_init();

    curl_setopt_array($curl, array(
        CURLOPT_URL => $url,
        CURLOPT_RETURNTRANSFER => 1,
        CURLOPT_MAXREDIRS => 10,
        CURLOPT_TIMEOUT => 30,
        //CURLOPT_HTTP_VERSION => CURL_HTTP_VERSION_1_1,
        CURLOPT_CUSTOMREQUEST => "POST",
        CURLOPT_POST => 1,
        CURLOPT_POSTFIELDS => file_get_contents($filename),
        CURLOPT_HTTPHEADER => array(
            //"Authorization: Bearer $TOKEN",
            "Content-Type: multipart/form-data",
            "Content-Length: " . strlen(file_get_contents($filename)),
            "API-Key: abcdefghi" //Optional if required
        ),
    ));

   $response = curl_exec($curl);

    $info = curl_getinfo($curl);
//echo "code: ${info['http_code']}";

//print_r($info['request_header']);

    var_dump($response);
    $err = curl_error($curl);

    echo "error";
    var_dump($err);
    curl_close($curl);

You can try FileUtils#forceMkdir

FileUtils.forceMkdir("/path/directory");

This library have a lot of useful functions.

This can be achieve by creating object of List data structure, as follows

List list = new ArrayList();

For more information refer this link

How to create a Multidimensional ArrayList in Java?

The two conditional statements you list here are not better than one another. Your usage depends on the situation. You have a typo by the way in the 2nd example. There should be only one equals sign after the exclamation mark.

The 1st example determines if the value in myVar is true and executes the code inside of the {...}

The 2nd example evaluates if myVar does not equal null and if that case is true it will execute your code inside of the {...}

I suggest taking a look into conditional statements for more techniques. Once you are familiar with them, you can decide when you need them.

The other queries are all going base on any ONE of the conditions qualifying and it will return a record... if you want to make sure the BOTH columns of table A are matched, you'll have to do something like...

select 
      tA.Col1,
      tA.Col2,
      tB.Val
   from
      TableA tA
         join TableB tB
            on  ( tA.Col1 = tB.Col1 OR tA.Col1 = tB.Col2 )
            AND ( tA.Col2 = tB.Col1 OR tA.Col2 = tB.Col2 )

Ctrl + W will clear the word to the left.

Presumably, those columns are integer columns - which will be the reason as the result of the calculation will be of the same type.

e.g. if you do this:

SELECT 1 / 2

you will get 0, which is obviously not the real answer. So, convert the values to e.g. decimal and do the calculation based on that datatype instead.

e.g.

SELECT CAST(1 AS DECIMAL) / 2

gives 0.500000

Swift4

 func mimeTypeForPath(path: String) -> String {
        let url = NSURL(fileURLWithPath: path)
        let pathExtension = url.pathExtension

        if let uti = UTTypeCreatePreferredIdentifierForTag(kUTTagClassFilenameExtension, pathExtension! as NSString, nil)?.takeRetainedValue() {
            if let mimetype = UTTypeCopyPreferredTagWithClass(uti, kUTTagClassMIMEType)?.takeRetainedValue() {
                return mimetype as String
            }
        }
        return "application/octet-stream"
    }

I was with Angular 8 and the only thing which worked for me was this:

  getCustomHeaders(): HttpHeaders {
    const headers = new HttpHeaders()
      .set('Content-Type', 'application/json')
      .set('Api-Key', 'xxx');
    return headers;
  }

You can set a default style for the entire workbook (all worksheets):

$objPHPExcel->getDefaultStyle()
    ->getBorders()
    ->getTop()
        ->setBorderStyle(PHPExcel_Style_Border::BORDER_THIN);
$objPHPExcel->getDefaultStyle()
    ->getBorders()
    ->getBottom()
        ->setBorderStyle(PHPExcel_Style_Border::BORDER_THIN);
$objPHPExcel->getDefaultStyle()
    ->getBorders()
    ->getLeft()
        ->setBorderStyle(PHPExcel_Style_Border::BORDER_THIN);
$objPHPExcel->getDefaultStyle()
    ->getBorders()
    ->getRight()
        ->setBorderStyle(PHPExcel_Style_Border::BORDER_THIN);

or

  $styleArray = array(
      'borders' => array(
          'allborders' => array(
              'style' => PHPExcel_Style_Border::BORDER_THIN
          )
      )
  );
$objPHPExcel->getDefaultStyle()->applyFromArray($styleArray);

And this can be used for all style properties, not just borders.

But column autosizing is structural rather than stylistic, and has to be set for each column on each worksheet individually.

EDIT

Note that default workbook style only applies to Excel5 Writer

<input type="text" maxlength="5">

the maximum amount of letters that can be in the input is 5.

6/1/2011 4:08:40 PM Local
6/1/2011 4:08:40 PM Utc

from

DateTime dt = DateTime.Now;            
Console.WriteLine("{0} {1}", dt, dt.Kind);
DateTime ut = DateTime.SpecifyKind(dt, DateTimeKind.Utc);
Console.WriteLine("{0} {1}", ut, ut.Kind);

Try this:

.row > .span3 {
    display: inline-block !important;
    vertical-align: middle !important;
}

Edit:

Fiddle: http://jsfiddle.net/EexYE/

You may need to add Diego's float: none !important; also if span3 is floating and it interferes.

Edit:

Fiddle: http://jsfiddle.net/D8McR/

In response to Alberto: if you fix the height of the row div, then to continue the vertical center alignment you'll need to set the line-height of the row to be the same as the pixel height of the row (ie. both to 300px in your case). If you'll do that you will notice that the child elements inherit the line-height, which is a problem in this case, so you will then need to set your line height for the span3s to whatever it should actually be (1.5 is the example value in the fiddle, or 1.5 x the font-size, which we did not change when we changed the line-height).

STEP 1

Go to properties of your project ( with Alt+Enter or righ-click )

STEP 2

check on Apache Tomcat v7.0 under Targeted Runtime and it works.

source: https://stackoverflow.com/a/9287149

Just put "?autoplay=1" in the url the video will autoload.

So your url would be: http://www.youtube.com/embed/JW5meKfy3fY?autoplay=1

In case you wanna disable autoplay, just make 1 to 0 as ?autoplay=0

I would not advise a regex answer from Bart, I find parsing solution better in this particular case (as Fabian proposed). I've tried regex solution and own parsing implementation I have found that:

1. Parsing is much faster than splitting with regex with backreferences - ~20 times faster for short strings, ~40 times faster for long strings.
2. Regex fails to find empty string after last comma. That was not in original question though, it was mine requirement.

My solution and test below.

String tested = "foo,bar,c;qual=\"baz,blurb\",d;junk=\"quux,syzygy\",";
long start = System.nanoTime();
String[] tokens = tested.split(",(?=([^\"]*\"[^\"]*\")*[^\"]*$)");
long timeWithSplitting = System.nanoTime() - start;

start = System.nanoTime(); 
List<String> tokensList = new ArrayList<String>();
boolean inQuotes = false;
StringBuilder b = new StringBuilder();
for (char c : tested.toCharArray()) {
    switch (c) {
    case ',':
        if (inQuotes) {
            b.append(c);
        } else {
            tokensList.add(b.toString());
            b = new StringBuilder();
        }
        break;
    case '\"':
        inQuotes = !inQuotes;
    default:
        b.append(c);
    break;
    }
}
tokensList.add(b.toString());
long timeWithParsing = System.nanoTime() - start;

System.out.println(Arrays.toString(tokens));
System.out.println(tokensList.toString());
System.out.printf("Time with splitting:\t%10d\n",timeWithSplitting);
System.out.printf("Time with parsing:\t%10d\n",timeWithParsing);

Of course you are free to change switch to else-ifs in this snippet if you feel uncomfortable with its ugliness. Note then lack of break after switch with separator. StringBuilder was chosen instead to StringBuffer by design to increase speed, where thread safety is irrelevant.

In your case, I would use YAML .

That is an elegant and professional standard for dealing with multiple parameters. The values are loaded from a separate file. You can see some info in this link:

https://keleshev.com/yaml-quick-introduction

But it is easier to Google it, as it is a standard, there are hundreds of info about it, you can find what best fits to your understanding. ;)

Best regards.

$res = mysql_query("SELECT table_name FROM information_schema.tables WHERE table_schema = '$databasename' AND table_name = '$tablename';");

If no records are returned then it doesn't exist.

You can use the % character to 'escape' characters that aren't allowed in URLs. See [RFC 1738].

A table of ASCII values on http://www.asciitable.com/.

You can see & is 26 in hexadecimal - so you need M%26M.

byte[] myvar = "Any String you want".getBytes();

String literals can be escaped to provide any character:

byte[] CDRIVES = "\u00e0\u004f\u00d0\u0020\u00ea\u003a\u0069\u0010\u00a2\u00d8\u0008\u0000\u002b\u0030\u0030\u009d".getBytes();

Based on 6LYTH3's answer I've decided to post my own due to some improvements that may come in handy:

Simple solution

Open ~/.bash_profile and add the following content

# \[\e[0m\] resets the color to default color
reset_color='\[\e[0m\]'
#  \[\033[33m\] sets the color to yellow
path_color='\[\033[33m\]'
# \e[0;32m\ sets the color to green
git_clean_color='\[\e[0;32m\]'
# \e[0;31m\ sets the color to red
git_dirty_color='\[\e[0;31m\]'

# determines if the git branch you are on is clean or dirty
git_prompt ()
{
  # Is this a git directory?
  if ! git rev-parse --git-dir > /dev/null 2>&1; then
    return 0
  fi
  # Grab working branch name
  git_branch=$(git branch 2>/dev/null| sed -n '/^\*/s/^\* //p')
  # Clean or dirty branch
  if git diff --quiet 2>/dev/null >&2; then
    git_color="${git_clean_color}"
  else
    git_color="${git_dirty_color}"
  fi
  echo " [$git_color$git_branch${reset_color}]"
}

export PS1="${path_color}\w\[\e[0m\]$(git_prompt)\n"

This should:

1) Prompt the path you're in, in color: path_color.
2) Tell you which branch are you.
3) Color the name of the branch based on the status of the branch with git_clean_color 
for a clean work directory and git_dirty_color for a dirty one.
4) The brackets should stay in the default color you established in your computer.
5) Puts the prompt in the next line for readability.

You can customize the colors with this list

Sophisticated Solution

Another option is to use Git Bash Prompt, install with this. I used the option via Homebrew on Mac OS X.

git_prompt_list_themes to see the themes but I didn't like any of them.

git_prompt_color_samples to see available colors.

git_prompt_make_custom_theme [<Name of base theme>] to create a new custom theme, this should create a .git-prompt-colors.sh file.

subl ~/.git-prompt-colors.sh to open git-prompt-colors.sh and customize:

The .git-prompt-colors.sh file should look like this with my customization

    override_git_prompt_colors() {
      GIT_PROMPT_THEME_NAME="Custom"

      # Clean or dirty branch
      if git diff --quiet 2>/dev/null >&2; then
        GIT_PROMPT_BRANCH="${Green}"
      else
        GIT_PROMPT_BRANCH="${Red}"
      fi
    }

    reload_git_prompt_colors "Custom"

Hope this helps, have a great day!

If you want to use it with groups, you can use:

library(plyr)
mydata<-mtcars
ddply(mydata,.(carb),colwise(sd))



  carb      mpg       cyl      disp       hp      drat        wt     qsec        vs        am      gear
1    1 6.001349 0.9759001  75.90037 19.78215 0.5548702 0.6214499 0.590867 0.0000000 0.5345225 0.5345225
2    2 5.472152 2.0655911 122.50499 43.96413 0.6782568 0.8269761 1.967069 0.5270463 0.5163978 0.7888106
3    3 1.053565 0.0000000   0.00000  0.00000 0.0000000 0.1835756 0.305505 0.0000000 0.0000000 0.0000000
4    4 3.911081 1.0327956 132.06337 62.94972 0.4575102 1.0536001 1.394937 0.4216370 0.4830459 0.6992059
5    6       NA        NA        NA       NA        NA        NA       NA        NA        NA        NA
6    8       NA        NA        NA       NA        NA        NA       NA        NA        NA        NA

That's one of the reasons why you need to quote your variables:

echo "${str:$i:1}"

Otherwise, bash expands the variable and in this case does globbing before printing out. It is also better to quote the parameter to the script (in case you have a matching filename):

sh lash_ch.sh 'abcde*'

Also see the order of expansions in the bash reference manual. Variables are expanded before the filename expansion.

To get the last character you should just use -1 as the index since the negative indices count from the end of the string:

echo "${str: -1}"

The space after the colon (:) is REQUIRED.

This approach will not work without the space.

I know this may be a bit old, but try using PDO::lastInsertId. I think it does what you want it to, but you would have to rewrite your application to use PDO (Which is a lot safer against attacks)

protected void Page_Load(object sender, EventArgs e)
{
    SqlConnection con = new SqlConnection("data source=.;uid=sa;pwd=123;database=shop");
    //SqlCommand cmd = new SqlCommand("select * from tblemployees", con);
    //SqlCommand cmd1 = new SqlCommand("select * from tblproducts", con);
    //SqlDataAdapter da = new SqlDataAdapter();

    //DataSet ds = new DataSet();
    //ds.Tables.Add("emp");
    //ds.Tables.Add("products");
    //da.SelectCommand = cmd;
    //da.Fill(ds.Tables["emp"]);
    //da.SelectCommand = cmd1;

    //da.Fill(ds.Tables["products"]);
    SqlDataAdapter da = new SqlDataAdapter("select * from tblemployees", con);
    DataSet ds = new DataSet();
    da.Fill(ds, "em");
    da = new SqlDataAdapter("select * from tblproducts", con);
    da.Fill(ds, "prod");

    GridView1.DataSource = ds.Tables["em"];
    GridView1.DataBind();
    GridView2.DataSource = ds.Tables["prod"];
    GridView2.DataBind();
}

The accepted answer uses REGEX and you cannot create an alias command with REGEX, you have to put it into a shell script, I'm using Amazon Linux 2 and did the following:

1. I put the accepted answer code into a file using :

   sudo vim find.sh

add this code:

find ./ -type f | perl -ne 'print $1 if m/\.([^.\/]+)$/' | sort -u

save the file by typing: :wq!

2. sudo vim ~/.bash_profile

3. alias getext=". /path/to/your/find.sh"

4. :wq!

5. . ~/.bash_profile

Try this

$('#datepicker2').datepicker('setDate', new Date('<?=$value->fecha_final?>')); 

since my post above, I have moved to a Generic Factory Class

Usage

 services.AddFactory<IProcessor, string>()
         .Add<ProcessorA>("A")
         .Add<ProcessorB>("B");

 public MyClass(IFactory<IProcessor, string> processorFactory)
 {
       var x = "A"; //some runtime variable to select which object to create
       var processor = processorFactory.Create(x);
 }

Implementation

public class FactoryBuilder<I, P> where I : class
{
    private readonly IServiceCollection _services;
    private readonly FactoryTypes<I, P> _factoryTypes;
    public FactoryBuilder(IServiceCollection services)
    {
        _services = services;
        _factoryTypes = new FactoryTypes<I, P>();
    }
    public FactoryBuilder<I, P> Add<T>(P p)
        where T : class, I
    {
        _factoryTypes.ServiceList.Add(p, typeof(T));

        _services.AddSingleton(_factoryTypes);
        _services.AddTransient<T>();
        return this;
    }
}
public class FactoryTypes<I, P> where I : class
{
    public Dictionary<P, Type> ServiceList { get; set; } = new Dictionary<P, Type>();
}

public interface IFactory<I, P>
{
    I Create(P p);
}

public class Factory<I, P> : IFactory<I, P> where I : class
{
    private readonly IServiceProvider _serviceProvider;
    private readonly FactoryTypes<I, P> _factoryTypes;
    public Factory(IServiceProvider serviceProvider, FactoryTypes<I, P> factoryTypes)
    {
        _serviceProvider = serviceProvider;
        _factoryTypes = factoryTypes;
    }

    public I Create(P p)
    {
        return (I)_serviceProvider.GetService(_factoryTypes.ServiceList[p]);
    }
}

Extension

namespace Microsoft.Extensions.DependencyInjection
{
    public static class DependencyExtensions
    {
        public static FactoryBuilder<I, P> AddFactory<I, P>(this IServiceCollection services)
            where I : class
        {
            services.AddTransient<IFactory<I, P>, Factory<I, P>>();
            return new FactoryBuilder<I, P>(services);
        }
    }
}

You have a version conflict, please verify whether compiled version and JVM of Tomcat version are same. you can do it by examining tomcat startup .bat , looking for JAVA_HOME

Angular RC5 & RC6

If you are getting the above mentioned error in your Jasmine tests, it is most likely because you have to declare the unrenderable component in your TestBed.configureTestingModule({}).

The TestBed configures and initializes an environment for unit testing and provides methods for mocking/creating/injecting components and services in unit tests.

If you don't declare the component before your unit tests are executed, Angular will not know what <courses></courses> is in your template file.

Here is an example:

import {async, ComponentFixture, TestBed} from "@angular/core/testing";
import {AppComponent} from "../app.component";
import {CoursesComponent} from './courses.component';

describe('CoursesComponent', () => {
  let component: CoursesComponent;
  let fixture: ComponentFixture<CoursesComponent>;

  beforeEach(async(() => {
    TestBed.configureTestingModule({
      declarations: [
        AppComponent,
        CoursesComponent
      ],
      imports: [
        BrowserModule
        // If you have any other imports add them here
      ]
    })
    .compileComponents();
  }));

  beforeEach(() => {
    fixture = TestBed.createComponent(CoursesComponent);
    component = fixture.componentInstance;
    fixture.detectChanges();
  });

  it('should create', () => {
    expect(component).toBeTruthy();
  });
});

The map function can be very useful here. Using map we can apply any function to each element of an iterable.

Python 3.x

>>> def my_mul(x,y):
...     return x*y
...
>>> a = [1,2,3,4]
>>> b = [2,3,4,5]
>>>
>>> list(map(my_mul,a,b))
[2, 6, 12, 20]
>>>

Of course:

map(f, iterable)

is equivalent to

[f(x) for x in iterable]

So we can get our solution via:

>>> [my_mul(x,y) for x, y in zip(a,b)]
[2, 6, 12, 20]
>>>

In Python 2.x map() means: apply a function to each element of an iterable and construct a new list. In Python 3.x, map construct iterators instead of lists.

Instead of my_mul we could use mul operator

Python 2.7

>>>from operator import mul # import mul operator
>>>a = [1,2,3,4]
>>>b = [2,3,4,5]
>>>map(mul,a,b)
[2, 6, 12, 20]
>>>

Python 3.5+

>>> from operator import mul
>>> a = [1,2,3,4]
>>> b = [2,3,4,5]
>>> [*map(mul,a,b)]
[2, 6, 12, 20]
>>>

Please note that since map() constructs an iterator we use * iterable unpacking operator to get a list. The unpacking approach is a bit faster then the list constructor:

>>> list(map(mul,a,b))
[2, 6, 12, 20]
>>>

You are probably looking for the DATEDIFF function.

DATEDIFF ( datepart , startdate , enddate )

Where you code might look like this:

DATEDIFF ( hh , startdate , enddate )

The strcomp function may be appropriate here (returns 0 when strings are identical):

 SELECT * from table WHERE Strcmp(user, testername) <> 0;

If your project name contain '-'. Remove it and try. This can cause problem in running 'ng'.